linux-stable/drivers/usb/dwc3/core.h

1423 lines
44 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* core.h - DesignWare USB3 DRD Core Header
*
* Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
*
* Authors: Felipe Balbi <balbi@ti.com>,
* Sebastian Andrzej Siewior <bigeasy@linutronix.de>
*/
#ifndef __DRIVERS_USB_DWC3_CORE_H
#define __DRIVERS_USB_DWC3_CORE_H
#include <linux/device.h>
#include <linux/spinlock.h>
#include <linux/ioport.h>
#include <linux/list.h>
#include <linux/bitops.h>
#include <linux/dma-mapping.h>
#include <linux/mm.h>
#include <linux/debugfs.h>
#include <linux/wait.h>
#include <linux/workqueue.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <linux/usb/otg.h>
#include <linux/ulpi/interface.h>
#include <linux/phy/phy.h>
#define DWC3_MSG_MAX 500
/* Global constants */
#define DWC3_PULL_UP_TIMEOUT 500 /* ms */
#define DWC3_BOUNCE_SIZE 1024 /* size of a superspeed bulk */
#define DWC3_EP0_SETUP_SIZE 512
#define DWC3_ENDPOINTS_NUM 32
#define DWC3_XHCI_RESOURCES_NUM 2
#define DWC3_SCRATCHBUF_SIZE 4096 /* each buffer is assumed to be 4KiB */
#define DWC3_EVENT_BUFFERS_SIZE 4096
#define DWC3_EVENT_TYPE_MASK 0xfe
#define DWC3_EVENT_TYPE_DEV 0
#define DWC3_EVENT_TYPE_CARKIT 3
#define DWC3_EVENT_TYPE_I2C 4
#define DWC3_DEVICE_EVENT_DISCONNECT 0
#define DWC3_DEVICE_EVENT_RESET 1
#define DWC3_DEVICE_EVENT_CONNECT_DONE 2
#define DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE 3
#define DWC3_DEVICE_EVENT_WAKEUP 4
#define DWC3_DEVICE_EVENT_HIBER_REQ 5
#define DWC3_DEVICE_EVENT_EOPF 6
#define DWC3_DEVICE_EVENT_SOF 7
#define DWC3_DEVICE_EVENT_ERRATIC_ERROR 9
#define DWC3_DEVICE_EVENT_CMD_CMPL 10
#define DWC3_DEVICE_EVENT_OVERFLOW 11
/* Controller's role while using the OTG block */
#define DWC3_OTG_ROLE_IDLE 0
#define DWC3_OTG_ROLE_HOST 1
#define DWC3_OTG_ROLE_DEVICE 2
#define DWC3_GEVNTCOUNT_MASK 0xfffc
#define DWC3_GEVNTCOUNT_EHB BIT(31)
#define DWC3_GSNPSID_MASK 0xffff0000
#define DWC3_GSNPSREV_MASK 0xffff
/* DWC3 registers memory space boundries */
#define DWC3_XHCI_REGS_START 0x0
#define DWC3_XHCI_REGS_END 0x7fff
#define DWC3_GLOBALS_REGS_START 0xc100
#define DWC3_GLOBALS_REGS_END 0xc6ff
#define DWC3_DEVICE_REGS_START 0xc700
#define DWC3_DEVICE_REGS_END 0xcbff
#define DWC3_OTG_REGS_START 0xcc00
#define DWC3_OTG_REGS_END 0xccff
/* Global Registers */
#define DWC3_GSBUSCFG0 0xc100
#define DWC3_GSBUSCFG1 0xc104
#define DWC3_GTXTHRCFG 0xc108
#define DWC3_GRXTHRCFG 0xc10c
#define DWC3_GCTL 0xc110
#define DWC3_GEVTEN 0xc114
#define DWC3_GSTS 0xc118
#define DWC3_GUCTL1 0xc11c
#define DWC3_GSNPSID 0xc120
#define DWC3_GGPIO 0xc124
#define DWC3_GUID 0xc128
#define DWC3_GUCTL 0xc12c
#define DWC3_GBUSERRADDR0 0xc130
#define DWC3_GBUSERRADDR1 0xc134
#define DWC3_GPRTBIMAP0 0xc138
#define DWC3_GPRTBIMAP1 0xc13c
#define DWC3_GHWPARAMS0 0xc140
#define DWC3_GHWPARAMS1 0xc144
#define DWC3_GHWPARAMS2 0xc148
#define DWC3_GHWPARAMS3 0xc14c
#define DWC3_GHWPARAMS4 0xc150
#define DWC3_GHWPARAMS5 0xc154
#define DWC3_GHWPARAMS6 0xc158
#define DWC3_GHWPARAMS7 0xc15c
#define DWC3_GDBGFIFOSPACE 0xc160
#define DWC3_GDBGLTSSM 0xc164
#define DWC3_GDBGBMU 0xc16c
#define DWC3_GDBGLSPMUX 0xc170
#define DWC3_GDBGLSP 0xc174
#define DWC3_GDBGEPINFO0 0xc178
#define DWC3_GDBGEPINFO1 0xc17c
#define DWC3_GPRTBIMAP_HS0 0xc180
#define DWC3_GPRTBIMAP_HS1 0xc184
#define DWC3_GPRTBIMAP_FS0 0xc188
#define DWC3_GPRTBIMAP_FS1 0xc18c
#define DWC3_GUCTL2 0xc19c
#define DWC3_VER_NUMBER 0xc1a0
#define DWC3_VER_TYPE 0xc1a4
#define DWC3_GUSB2PHYCFG(n) (0xc200 + ((n) * 0x04))
#define DWC3_GUSB2I2CCTL(n) (0xc240 + ((n) * 0x04))
#define DWC3_GUSB2PHYACC(n) (0xc280 + ((n) * 0x04))
#define DWC3_GUSB3PIPECTL(n) (0xc2c0 + ((n) * 0x04))
#define DWC3_GTXFIFOSIZ(n) (0xc300 + ((n) * 0x04))
#define DWC3_GRXFIFOSIZ(n) (0xc380 + ((n) * 0x04))
#define DWC3_GEVNTADRLO(n) (0xc400 + ((n) * 0x10))
#define DWC3_GEVNTADRHI(n) (0xc404 + ((n) * 0x10))
#define DWC3_GEVNTSIZ(n) (0xc408 + ((n) * 0x10))
#define DWC3_GEVNTCOUNT(n) (0xc40c + ((n) * 0x10))
#define DWC3_GHWPARAMS8 0xc600
#define DWC3_GFLADJ 0xc630
/* Device Registers */
#define DWC3_DCFG 0xc700
#define DWC3_DCTL 0xc704
#define DWC3_DEVTEN 0xc708
#define DWC3_DSTS 0xc70c
#define DWC3_DGCMDPAR 0xc710
#define DWC3_DGCMD 0xc714
#define DWC3_DALEPENA 0xc720
#define DWC3_DEP_BASE(n) (0xc800 + ((n) * 0x10))
#define DWC3_DEPCMDPAR2 0x00
#define DWC3_DEPCMDPAR1 0x04
#define DWC3_DEPCMDPAR0 0x08
#define DWC3_DEPCMD 0x0c
#define DWC3_DEV_IMOD(n) (0xca00 + ((n) * 0x4))
/* OTG Registers */
#define DWC3_OCFG 0xcc00
#define DWC3_OCTL 0xcc04
#define DWC3_OEVT 0xcc08
#define DWC3_OEVTEN 0xcc0C
#define DWC3_OSTS 0xcc10
/* Bit fields */
/* Global Debug Queue/FIFO Space Available Register */
#define DWC3_GDBGFIFOSPACE_NUM(n) ((n) & 0x1f)
#define DWC3_GDBGFIFOSPACE_TYPE(n) (((n) << 5) & 0x1e0)
#define DWC3_GDBGFIFOSPACE_SPACE_AVAILABLE(n) (((n) >> 16) & 0xffff)
#define DWC3_TXFIFOQ 0
#define DWC3_RXFIFOQ 1
#define DWC3_TXREQQ 2
#define DWC3_RXREQQ 3
#define DWC3_RXINFOQ 4
#define DWC3_PSTATQ 5
#define DWC3_DESCFETCHQ 6
#define DWC3_EVENTQ 7
#define DWC3_AUXEVENTQ 8
/* Global RX Threshold Configuration Register */
#define DWC3_GRXTHRCFG_MAXRXBURSTSIZE(n) (((n) & 0x1f) << 19)
#define DWC3_GRXTHRCFG_RXPKTCNT(n) (((n) & 0xf) << 24)
#define DWC3_GRXTHRCFG_PKTCNTSEL BIT(29)
/* Global RX Threshold Configuration Register for DWC_usb31 only */
#define DWC31_GRXTHRCFG_MAXRXBURSTSIZE(n) (((n) & 0x1f) << 16)
#define DWC31_GRXTHRCFG_RXPKTCNT(n) (((n) & 0x1f) << 21)
#define DWC31_GRXTHRCFG_PKTCNTSEL BIT(26)
#define DWC31_RXTHRNUMPKTSEL_HS_PRD BIT(15)
#define DWC31_RXTHRNUMPKT_HS_PRD(n) (((n) & 0x3) << 13)
#define DWC31_RXTHRNUMPKTSEL_PRD BIT(10)
#define DWC31_RXTHRNUMPKT_PRD(n) (((n) & 0x1f) << 5)
#define DWC31_MAXRXBURSTSIZE_PRD(n) ((n) & 0x1f)
/* Global TX Threshold Configuration Register for DWC_usb31 only */
#define DWC31_GTXTHRCFG_MAXTXBURSTSIZE(n) (((n) & 0x1f) << 16)
#define DWC31_GTXTHRCFG_TXPKTCNT(n) (((n) & 0x1f) << 21)
#define DWC31_GTXTHRCFG_PKTCNTSEL BIT(26)
#define DWC31_TXTHRNUMPKTSEL_HS_PRD BIT(15)
#define DWC31_TXTHRNUMPKT_HS_PRD(n) (((n) & 0x3) << 13)
#define DWC31_TXTHRNUMPKTSEL_PRD BIT(10)
#define DWC31_TXTHRNUMPKT_PRD(n) (((n) & 0x1f) << 5)
#define DWC31_MAXTXBURSTSIZE_PRD(n) ((n) & 0x1f)
/* Global Configuration Register */
#define DWC3_GCTL_PWRDNSCALE(n) ((n) << 19)
#define DWC3_GCTL_U2RSTECN BIT(16)
#define DWC3_GCTL_RAMCLKSEL(x) (((x) & DWC3_GCTL_CLK_MASK) << 6)
#define DWC3_GCTL_CLK_BUS (0)
#define DWC3_GCTL_CLK_PIPE (1)
#define DWC3_GCTL_CLK_PIPEHALF (2)
#define DWC3_GCTL_CLK_MASK (3)
#define DWC3_GCTL_PRTCAP(n) (((n) & (3 << 12)) >> 12)
#define DWC3_GCTL_PRTCAPDIR(n) ((n) << 12)
#define DWC3_GCTL_PRTCAP_HOST 1
#define DWC3_GCTL_PRTCAP_DEVICE 2
#define DWC3_GCTL_PRTCAP_OTG 3
#define DWC3_GCTL_CORESOFTRESET BIT(11)
#define DWC3_GCTL_SOFITPSYNC BIT(10)
#define DWC3_GCTL_SCALEDOWN(n) ((n) << 4)
#define DWC3_GCTL_SCALEDOWN_MASK DWC3_GCTL_SCALEDOWN(3)
#define DWC3_GCTL_DISSCRAMBLE BIT(3)
#define DWC3_GCTL_U2EXIT_LFPS BIT(2)
#define DWC3_GCTL_GBLHIBERNATIONEN BIT(1)
#define DWC3_GCTL_DSBLCLKGTNG BIT(0)
/* Global User Control 1 Register */
#define DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS BIT(28)
#define DWC3_GUCTL1_DEV_L1_EXIT_BY_HW BIT(24)
/* Global Status Register */
#define DWC3_GSTS_OTG_IP BIT(10)
#define DWC3_GSTS_BC_IP BIT(9)
#define DWC3_GSTS_ADP_IP BIT(8)
#define DWC3_GSTS_HOST_IP BIT(7)
#define DWC3_GSTS_DEVICE_IP BIT(6)
#define DWC3_GSTS_CSR_TIMEOUT BIT(5)
#define DWC3_GSTS_BUS_ERR_ADDR_VLD BIT(4)
/* Global USB2 PHY Configuration Register */
#define DWC3_GUSB2PHYCFG_PHYSOFTRST BIT(31)
#define DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS BIT(30)
#define DWC3_GUSB2PHYCFG_SUSPHY BIT(6)
#define DWC3_GUSB2PHYCFG_ULPI_UTMI BIT(4)
#define DWC3_GUSB2PHYCFG_ENBLSLPM BIT(8)
#define DWC3_GUSB2PHYCFG_PHYIF(n) (n << 3)
#define DWC3_GUSB2PHYCFG_PHYIF_MASK DWC3_GUSB2PHYCFG_PHYIF(1)
#define DWC3_GUSB2PHYCFG_USBTRDTIM(n) (n << 10)
#define DWC3_GUSB2PHYCFG_USBTRDTIM_MASK DWC3_GUSB2PHYCFG_USBTRDTIM(0xf)
#define USBTRDTIM_UTMI_8_BIT 9
#define USBTRDTIM_UTMI_16_BIT 5
#define UTMI_PHYIF_16_BIT 1
#define UTMI_PHYIF_8_BIT 0
/* Global USB2 PHY Vendor Control Register */
#define DWC3_GUSB2PHYACC_NEWREGREQ BIT(25)
#define DWC3_GUSB2PHYACC_BUSY BIT(23)
#define DWC3_GUSB2PHYACC_WRITE BIT(22)
#define DWC3_GUSB2PHYACC_ADDR(n) (n << 16)
#define DWC3_GUSB2PHYACC_EXTEND_ADDR(n) (n << 8)
#define DWC3_GUSB2PHYACC_DATA(n) (n & 0xff)
/* Global USB3 PIPE Control Register */
#define DWC3_GUSB3PIPECTL_PHYSOFTRST BIT(31)
#define DWC3_GUSB3PIPECTL_U2SSINP3OK BIT(29)
#define DWC3_GUSB3PIPECTL_DISRXDETINP3 BIT(28)
#define DWC3_GUSB3PIPECTL_UX_EXIT_PX BIT(27)
#define DWC3_GUSB3PIPECTL_REQP1P2P3 BIT(24)
#define DWC3_GUSB3PIPECTL_DEP1P2P3(n) ((n) << 19)
#define DWC3_GUSB3PIPECTL_DEP1P2P3_MASK DWC3_GUSB3PIPECTL_DEP1P2P3(7)
#define DWC3_GUSB3PIPECTL_DEP1P2P3_EN DWC3_GUSB3PIPECTL_DEP1P2P3(1)
#define DWC3_GUSB3PIPECTL_DEPOCHANGE BIT(18)
#define DWC3_GUSB3PIPECTL_SUSPHY BIT(17)
#define DWC3_GUSB3PIPECTL_LFPSFILT BIT(9)
#define DWC3_GUSB3PIPECTL_RX_DETOPOLL BIT(8)
#define DWC3_GUSB3PIPECTL_TX_DEEPH_MASK DWC3_GUSB3PIPECTL_TX_DEEPH(3)
#define DWC3_GUSB3PIPECTL_TX_DEEPH(n) ((n) << 1)
/* Global TX Fifo Size Register */
#define DWC31_GTXFIFOSIZ_TXFRAMNUM BIT(15) /* DWC_usb31 only */
#define DWC31_GTXFIFOSIZ_TXFDEF(n) ((n) & 0x7fff) /* DWC_usb31 only */
#define DWC3_GTXFIFOSIZ_TXFDEF(n) ((n) & 0xffff)
#define DWC3_GTXFIFOSIZ_TXFSTADDR(n) ((n) & 0xffff0000)
/* Global Event Size Registers */
#define DWC3_GEVNTSIZ_INTMASK BIT(31)
#define DWC3_GEVNTSIZ_SIZE(n) ((n) & 0xffff)
/* Global HWPARAMS0 Register */
#define DWC3_GHWPARAMS0_MODE(n) ((n) & 0x3)
#define DWC3_GHWPARAMS0_MODE_GADGET 0
#define DWC3_GHWPARAMS0_MODE_HOST 1
#define DWC3_GHWPARAMS0_MODE_DRD 2
#define DWC3_GHWPARAMS0_MBUS_TYPE(n) (((n) >> 3) & 0x7)
#define DWC3_GHWPARAMS0_SBUS_TYPE(n) (((n) >> 6) & 0x3)
#define DWC3_GHWPARAMS0_MDWIDTH(n) (((n) >> 8) & 0xff)
#define DWC3_GHWPARAMS0_SDWIDTH(n) (((n) >> 16) & 0xff)
#define DWC3_GHWPARAMS0_AWIDTH(n) (((n) >> 24) & 0xff)
/* Global HWPARAMS1 Register */
#define DWC3_GHWPARAMS1_EN_PWROPT(n) (((n) & (3 << 24)) >> 24)
#define DWC3_GHWPARAMS1_EN_PWROPT_NO 0
#define DWC3_GHWPARAMS1_EN_PWROPT_CLK 1
#define DWC3_GHWPARAMS1_EN_PWROPT_HIB 2
#define DWC3_GHWPARAMS1_PWROPT(n) ((n) << 24)
#define DWC3_GHWPARAMS1_PWROPT_MASK DWC3_GHWPARAMS1_PWROPT(3)
/* Global HWPARAMS3 Register */
#define DWC3_GHWPARAMS3_SSPHY_IFC(n) ((n) & 3)
#define DWC3_GHWPARAMS3_SSPHY_IFC_DIS 0
#define DWC3_GHWPARAMS3_SSPHY_IFC_GEN1 1
#define DWC3_GHWPARAMS3_SSPHY_IFC_GEN2 2 /* DWC_usb31 only */
#define DWC3_GHWPARAMS3_HSPHY_IFC(n) (((n) & (3 << 2)) >> 2)
#define DWC3_GHWPARAMS3_HSPHY_IFC_DIS 0
#define DWC3_GHWPARAMS3_HSPHY_IFC_UTMI 1
#define DWC3_GHWPARAMS3_HSPHY_IFC_ULPI 2
#define DWC3_GHWPARAMS3_HSPHY_IFC_UTMI_ULPI 3
#define DWC3_GHWPARAMS3_FSPHY_IFC(n) (((n) & (3 << 4)) >> 4)
#define DWC3_GHWPARAMS3_FSPHY_IFC_DIS 0
#define DWC3_GHWPARAMS3_FSPHY_IFC_ENA 1
/* Global HWPARAMS4 Register */
#define DWC3_GHWPARAMS4_HIBER_SCRATCHBUFS(n) (((n) & (0x0f << 13)) >> 13)
#define DWC3_MAX_HIBER_SCRATCHBUFS 15
/* Global HWPARAMS6 Register */
#define DWC3_GHWPARAMS6_BCSUPPORT BIT(14)
#define DWC3_GHWPARAMS6_OTG3SUPPORT BIT(13)
#define DWC3_GHWPARAMS6_ADPSUPPORT BIT(12)
#define DWC3_GHWPARAMS6_HNPSUPPORT BIT(11)
#define DWC3_GHWPARAMS6_SRPSUPPORT BIT(10)
#define DWC3_GHWPARAMS6_EN_FPGA BIT(7)
/* Global HWPARAMS7 Register */
#define DWC3_GHWPARAMS7_RAM1_DEPTH(n) ((n) & 0xffff)
#define DWC3_GHWPARAMS7_RAM2_DEPTH(n) (((n) >> 16) & 0xffff)
/* Global Frame Length Adjustment Register */
#define DWC3_GFLADJ_30MHZ_SDBND_SEL BIT(7)
#define DWC3_GFLADJ_30MHZ_MASK 0x3f
/* Global User Control Register 2 */
#define DWC3_GUCTL2_RST_ACTBITLATER BIT(14)
/* Device Configuration Register */
#define DWC3_DCFG_DEVADDR(addr) ((addr) << 3)
#define DWC3_DCFG_DEVADDR_MASK DWC3_DCFG_DEVADDR(0x7f)
#define DWC3_DCFG_SPEED_MASK (7 << 0)
#define DWC3_DCFG_SUPERSPEED_PLUS (5 << 0) /* DWC_usb31 only */
#define DWC3_DCFG_SUPERSPEED (4 << 0)
#define DWC3_DCFG_HIGHSPEED (0 << 0)
#define DWC3_DCFG_FULLSPEED BIT(0)
#define DWC3_DCFG_LOWSPEED (2 << 0)
#define DWC3_DCFG_NUMP_SHIFT 17
#define DWC3_DCFG_NUMP(n) (((n) >> DWC3_DCFG_NUMP_SHIFT) & 0x1f)
#define DWC3_DCFG_NUMP_MASK (0x1f << DWC3_DCFG_NUMP_SHIFT)
#define DWC3_DCFG_LPM_CAP BIT(22)
/* Device Control Register */
#define DWC3_DCTL_RUN_STOP BIT(31)
#define DWC3_DCTL_CSFTRST BIT(30)
#define DWC3_DCTL_LSFTRST BIT(29)
#define DWC3_DCTL_HIRD_THRES_MASK (0x1f << 24)
#define DWC3_DCTL_HIRD_THRES(n) ((n) << 24)
#define DWC3_DCTL_APPL1RES BIT(23)
/* These apply for core versions 1.87a and earlier */
#define DWC3_DCTL_TRGTULST_MASK (0x0f << 17)
#define DWC3_DCTL_TRGTULST(n) ((n) << 17)
#define DWC3_DCTL_TRGTULST_U2 (DWC3_DCTL_TRGTULST(2))
#define DWC3_DCTL_TRGTULST_U3 (DWC3_DCTL_TRGTULST(3))
#define DWC3_DCTL_TRGTULST_SS_DIS (DWC3_DCTL_TRGTULST(4))
#define DWC3_DCTL_TRGTULST_RX_DET (DWC3_DCTL_TRGTULST(5))
#define DWC3_DCTL_TRGTULST_SS_INACT (DWC3_DCTL_TRGTULST(6))
/* These apply for core versions 1.94a and later */
#define DWC3_DCTL_LPM_ERRATA_MASK DWC3_DCTL_LPM_ERRATA(0xf)
#define DWC3_DCTL_LPM_ERRATA(n) ((n) << 20)
#define DWC3_DCTL_KEEP_CONNECT BIT(19)
#define DWC3_DCTL_L1_HIBER_EN BIT(18)
#define DWC3_DCTL_CRS BIT(17)
#define DWC3_DCTL_CSS BIT(16)
#define DWC3_DCTL_INITU2ENA BIT(12)
#define DWC3_DCTL_ACCEPTU2ENA BIT(11)
#define DWC3_DCTL_INITU1ENA BIT(10)
#define DWC3_DCTL_ACCEPTU1ENA BIT(9)
#define DWC3_DCTL_TSTCTRL_MASK (0xf << 1)
#define DWC3_DCTL_ULSTCHNGREQ_MASK (0x0f << 5)
#define DWC3_DCTL_ULSTCHNGREQ(n) (((n) << 5) & DWC3_DCTL_ULSTCHNGREQ_MASK)
#define DWC3_DCTL_ULSTCHNG_NO_ACTION (DWC3_DCTL_ULSTCHNGREQ(0))
#define DWC3_DCTL_ULSTCHNG_SS_DISABLED (DWC3_DCTL_ULSTCHNGREQ(4))
#define DWC3_DCTL_ULSTCHNG_RX_DETECT (DWC3_DCTL_ULSTCHNGREQ(5))
#define DWC3_DCTL_ULSTCHNG_SS_INACTIVE (DWC3_DCTL_ULSTCHNGREQ(6))
#define DWC3_DCTL_ULSTCHNG_RECOVERY (DWC3_DCTL_ULSTCHNGREQ(8))
#define DWC3_DCTL_ULSTCHNG_COMPLIANCE (DWC3_DCTL_ULSTCHNGREQ(10))
#define DWC3_DCTL_ULSTCHNG_LOOPBACK (DWC3_DCTL_ULSTCHNGREQ(11))
/* Device Event Enable Register */
#define DWC3_DEVTEN_VNDRDEVTSTRCVEDEN BIT(12)
#define DWC3_DEVTEN_EVNTOVERFLOWEN BIT(11)
#define DWC3_DEVTEN_CMDCMPLTEN BIT(10)
#define DWC3_DEVTEN_ERRTICERREN BIT(9)
#define DWC3_DEVTEN_SOFEN BIT(7)
#define DWC3_DEVTEN_EOPFEN BIT(6)
#define DWC3_DEVTEN_HIBERNATIONREQEVTEN BIT(5)
#define DWC3_DEVTEN_WKUPEVTEN BIT(4)
#define DWC3_DEVTEN_ULSTCNGEN BIT(3)
#define DWC3_DEVTEN_CONNECTDONEEN BIT(2)
#define DWC3_DEVTEN_USBRSTEN BIT(1)
#define DWC3_DEVTEN_DISCONNEVTEN BIT(0)
/* Device Status Register */
#define DWC3_DSTS_DCNRD BIT(29)
/* This applies for core versions 1.87a and earlier */
#define DWC3_DSTS_PWRUPREQ BIT(24)
/* These apply for core versions 1.94a and later */
#define DWC3_DSTS_RSS BIT(25)
#define DWC3_DSTS_SSS BIT(24)
#define DWC3_DSTS_COREIDLE BIT(23)
#define DWC3_DSTS_DEVCTRLHLT BIT(22)
#define DWC3_DSTS_USBLNKST_MASK (0x0f << 18)
#define DWC3_DSTS_USBLNKST(n) (((n) & DWC3_DSTS_USBLNKST_MASK) >> 18)
#define DWC3_DSTS_RXFIFOEMPTY BIT(17)
#define DWC3_DSTS_SOFFN_MASK (0x3fff << 3)
#define DWC3_DSTS_SOFFN(n) (((n) & DWC3_DSTS_SOFFN_MASK) >> 3)
#define DWC3_DSTS_CONNECTSPD (7 << 0)
#define DWC3_DSTS_SUPERSPEED_PLUS (5 << 0) /* DWC_usb31 only */
#define DWC3_DSTS_SUPERSPEED (4 << 0)
#define DWC3_DSTS_HIGHSPEED (0 << 0)
#define DWC3_DSTS_FULLSPEED BIT(0)
#define DWC3_DSTS_LOWSPEED (2 << 0)
/* Device Generic Command Register */
#define DWC3_DGCMD_SET_LMP 0x01
#define DWC3_DGCMD_SET_PERIODIC_PAR 0x02
#define DWC3_DGCMD_XMIT_FUNCTION 0x03
/* These apply for core versions 1.94a and later */
#define DWC3_DGCMD_SET_SCRATCHPAD_ADDR_LO 0x04
#define DWC3_DGCMD_SET_SCRATCHPAD_ADDR_HI 0x05
#define DWC3_DGCMD_SELECTED_FIFO_FLUSH 0x09
#define DWC3_DGCMD_ALL_FIFO_FLUSH 0x0a
#define DWC3_DGCMD_SET_ENDPOINT_NRDY 0x0c
#define DWC3_DGCMD_RUN_SOC_BUS_LOOPBACK 0x10
#define DWC3_DGCMD_STATUS(n) (((n) >> 12) & 0x0F)
#define DWC3_DGCMD_CMDACT BIT(10)
#define DWC3_DGCMD_CMDIOC BIT(8)
/* Device Generic Command Parameter Register */
#define DWC3_DGCMDPAR_FORCE_LINKPM_ACCEPT BIT(0)
#define DWC3_DGCMDPAR_FIFO_NUM(n) ((n) << 0)
#define DWC3_DGCMDPAR_RX_FIFO (0 << 5)
#define DWC3_DGCMDPAR_TX_FIFO BIT(5)
#define DWC3_DGCMDPAR_LOOPBACK_DIS (0 << 0)
#define DWC3_DGCMDPAR_LOOPBACK_ENA BIT(0)
/* Device Endpoint Command Register */
#define DWC3_DEPCMD_PARAM_SHIFT 16
#define DWC3_DEPCMD_PARAM(x) ((x) << DWC3_DEPCMD_PARAM_SHIFT)
#define DWC3_DEPCMD_GET_RSC_IDX(x) (((x) >> DWC3_DEPCMD_PARAM_SHIFT) & 0x7f)
#define DWC3_DEPCMD_STATUS(x) (((x) >> 12) & 0x0F)
#define DWC3_DEPCMD_HIPRI_FORCERM BIT(11)
#define DWC3_DEPCMD_CLEARPENDIN BIT(11)
#define DWC3_DEPCMD_CMDACT BIT(10)
#define DWC3_DEPCMD_CMDIOC BIT(8)
#define DWC3_DEPCMD_DEPSTARTCFG (0x09 << 0)
#define DWC3_DEPCMD_ENDTRANSFER (0x08 << 0)
#define DWC3_DEPCMD_UPDATETRANSFER (0x07 << 0)
#define DWC3_DEPCMD_STARTTRANSFER (0x06 << 0)
#define DWC3_DEPCMD_CLEARSTALL (0x05 << 0)
#define DWC3_DEPCMD_SETSTALL (0x04 << 0)
/* This applies for core versions 1.90a and earlier */
#define DWC3_DEPCMD_GETSEQNUMBER (0x03 << 0)
/* This applies for core versions 1.94a and later */
#define DWC3_DEPCMD_GETEPSTATE (0x03 << 0)
#define DWC3_DEPCMD_SETTRANSFRESOURCE (0x02 << 0)
#define DWC3_DEPCMD_SETEPCONFIG (0x01 << 0)
#define DWC3_DEPCMD_CMD(x) ((x) & 0xf)
/* The EP number goes 0..31 so ep0 is always out and ep1 is always in */
#define DWC3_DALEPENA_EP(n) BIT(n)
#define DWC3_DEPCMD_TYPE_CONTROL 0
#define DWC3_DEPCMD_TYPE_ISOC 1
#define DWC3_DEPCMD_TYPE_BULK 2
#define DWC3_DEPCMD_TYPE_INTR 3
#define DWC3_DEV_IMOD_COUNT_SHIFT 16
#define DWC3_DEV_IMOD_COUNT_MASK (0xffff << 16)
#define DWC3_DEV_IMOD_INTERVAL_SHIFT 0
#define DWC3_DEV_IMOD_INTERVAL_MASK (0xffff << 0)
/* OTG Configuration Register */
#define DWC3_OCFG_DISPWRCUTTOFF BIT(5)
#define DWC3_OCFG_HIBDISMASK BIT(4)
#define DWC3_OCFG_SFTRSTMASK BIT(3)
#define DWC3_OCFG_OTGVERSION BIT(2)
#define DWC3_OCFG_HNPCAP BIT(1)
#define DWC3_OCFG_SRPCAP BIT(0)
/* OTG CTL Register */
#define DWC3_OCTL_OTG3GOERR BIT(7)
#define DWC3_OCTL_PERIMODE BIT(6)
#define DWC3_OCTL_PRTPWRCTL BIT(5)
#define DWC3_OCTL_HNPREQ BIT(4)
#define DWC3_OCTL_SESREQ BIT(3)
#define DWC3_OCTL_TERMSELIDPULSE BIT(2)
#define DWC3_OCTL_DEVSETHNPEN BIT(1)
#define DWC3_OCTL_HSTSETHNPEN BIT(0)
/* OTG Event Register */
#define DWC3_OEVT_DEVICEMODE BIT(31)
#define DWC3_OEVT_XHCIRUNSTPSET BIT(27)
#define DWC3_OEVT_DEVRUNSTPSET BIT(26)
#define DWC3_OEVT_HIBENTRY BIT(25)
#define DWC3_OEVT_CONIDSTSCHNG BIT(24)
#define DWC3_OEVT_HRRCONFNOTIF BIT(23)
#define DWC3_OEVT_HRRINITNOTIF BIT(22)
#define DWC3_OEVT_ADEVIDLE BIT(21)
#define DWC3_OEVT_ADEVBHOSTEND BIT(20)
#define DWC3_OEVT_ADEVHOST BIT(19)
#define DWC3_OEVT_ADEVHNPCHNG BIT(18)
#define DWC3_OEVT_ADEVSRPDET BIT(17)
#define DWC3_OEVT_ADEVSESSENDDET BIT(16)
#define DWC3_OEVT_BDEVBHOSTEND BIT(11)
#define DWC3_OEVT_BDEVHNPCHNG BIT(10)
#define DWC3_OEVT_BDEVSESSVLDDET BIT(9)
#define DWC3_OEVT_BDEVVBUSCHNG BIT(8)
#define DWC3_OEVT_BSESSVLD BIT(3)
#define DWC3_OEVT_HSTNEGSTS BIT(2)
#define DWC3_OEVT_SESREQSTS BIT(1)
#define DWC3_OEVT_ERROR BIT(0)
/* OTG Event Enable Register */
#define DWC3_OEVTEN_XHCIRUNSTPSETEN BIT(27)
#define DWC3_OEVTEN_DEVRUNSTPSETEN BIT(26)
#define DWC3_OEVTEN_HIBENTRYEN BIT(25)
#define DWC3_OEVTEN_CONIDSTSCHNGEN BIT(24)
#define DWC3_OEVTEN_HRRCONFNOTIFEN BIT(23)
#define DWC3_OEVTEN_HRRINITNOTIFEN BIT(22)
#define DWC3_OEVTEN_ADEVIDLEEN BIT(21)
#define DWC3_OEVTEN_ADEVBHOSTENDEN BIT(20)
#define DWC3_OEVTEN_ADEVHOSTEN BIT(19)
#define DWC3_OEVTEN_ADEVHNPCHNGEN BIT(18)
#define DWC3_OEVTEN_ADEVSRPDETEN BIT(17)
#define DWC3_OEVTEN_ADEVSESSENDDETEN BIT(16)
#define DWC3_OEVTEN_BDEVBHOSTENDEN BIT(11)
#define DWC3_OEVTEN_BDEVHNPCHNGEN BIT(10)
#define DWC3_OEVTEN_BDEVSESSVLDDETEN BIT(9)
#define DWC3_OEVTEN_BDEVVBUSCHNGEN BIT(8)
/* OTG Status Register */
#define DWC3_OSTS_DEVRUNSTP BIT(13)
#define DWC3_OSTS_XHCIRUNSTP BIT(12)
#define DWC3_OSTS_PERIPHERALSTATE BIT(4)
#define DWC3_OSTS_XHCIPRTPOWER BIT(3)
#define DWC3_OSTS_BSESVLD BIT(2)
#define DWC3_OSTS_VBUSVLD BIT(1)
#define DWC3_OSTS_CONIDSTS BIT(0)
/* Structures */
struct dwc3_trb;
/**
* struct dwc3_event_buffer - Software event buffer representation
* @buf: _THE_ buffer
* @cache: The buffer cache used in the threaded interrupt
* @length: size of this buffer
* @lpos: event offset
* @count: cache of last read event count register
* @flags: flags related to this event buffer
* @dma: dma_addr_t
* @dwc: pointer to DWC controller
*/
struct dwc3_event_buffer {
void *buf;
void *cache;
unsigned length;
unsigned int lpos;
unsigned int count;
unsigned int flags;
#define DWC3_EVENT_PENDING BIT(0)
dma_addr_t dma;
struct dwc3 *dwc;
};
#define DWC3_EP_FLAG_STALLED BIT(0)
#define DWC3_EP_FLAG_WEDGED BIT(1)
#define DWC3_EP_DIRECTION_TX true
#define DWC3_EP_DIRECTION_RX false
#define DWC3_TRB_NUM 256
/**
* struct dwc3_ep - device side endpoint representation
* @endpoint: usb endpoint
* @pending_list: list of pending requests for this endpoint
* @started_list: list of started requests on this endpoint
* @wait_end_transfer: wait_queue_head_t for waiting on End Transfer complete
* @lock: spinlock for endpoint request queue traversal
* @regs: pointer to first endpoint register
* @trb_pool: array of transaction buffers
* @trb_pool_dma: dma address of @trb_pool
* @trb_enqueue: enqueue 'pointer' into TRB array
* @trb_dequeue: dequeue 'pointer' into TRB array
* @dwc: pointer to DWC controller
* @saved_state: ep state saved during hibernation
* @flags: endpoint flags (wedged, stalled, ...)
* @number: endpoint number (1 - 15)
* @type: set to bmAttributes & USB_ENDPOINT_XFERTYPE_MASK
* @resource_index: Resource transfer index
* @frame_number: set to the frame number we want this transfer to start (ISOC)
* @interval: the interval on which the ISOC transfer is started
* @allocated_requests: number of requests allocated
* @queued_requests: number of requests queued for transfer
* @name: a human readable name e.g. ep1out-bulk
* @direction: true for TX, false for RX
* @stream_capable: true when streams are enabled
*/
struct dwc3_ep {
struct usb_ep endpoint;
struct list_head pending_list;
struct list_head started_list;
wait_queue_head_t wait_end_transfer;
spinlock_t lock;
void __iomem *regs;
struct dwc3_trb *trb_pool;
dma_addr_t trb_pool_dma;
struct dwc3 *dwc;
u32 saved_state;
unsigned flags;
#define DWC3_EP_ENABLED BIT(0)
#define DWC3_EP_STALL BIT(1)
#define DWC3_EP_WEDGE BIT(2)
#define DWC3_EP_BUSY BIT(4)
#define DWC3_EP_PENDING_REQUEST BIT(5)
#define DWC3_EP_MISSED_ISOC BIT(6)
#define DWC3_EP_END_TRANSFER_PENDING BIT(7)
#define DWC3_EP_TRANSFER_STARTED BIT(8)
/* This last one is specific to EP0 */
#define DWC3_EP0_DIR_IN BIT(31)
/*
* IMPORTANT: we *know* we have 256 TRBs in our @trb_pool, so we will
* use a u8 type here. If anybody decides to increase number of TRBs to
* anything larger than 256 - I can't see why people would want to do
* this though - then this type needs to be changed.
*
* By using u8 types we ensure that our % operator when incrementing
* enqueue and dequeue get optimized away by the compiler.
*/
u8 trb_enqueue;
u8 trb_dequeue;
u8 number;
u8 type;
u8 resource_index;
u32 allocated_requests;
u32 queued_requests;
u32 frame_number;
u32 interval;
char name[20];
unsigned direction:1;
unsigned stream_capable:1;
};
enum dwc3_phy {
DWC3_PHY_UNKNOWN = 0,
DWC3_PHY_USB3,
DWC3_PHY_USB2,
};
enum dwc3_ep0_next {
DWC3_EP0_UNKNOWN = 0,
DWC3_EP0_COMPLETE,
DWC3_EP0_NRDY_DATA,
DWC3_EP0_NRDY_STATUS,
};
enum dwc3_ep0_state {
EP0_UNCONNECTED = 0,
EP0_SETUP_PHASE,
EP0_DATA_PHASE,
EP0_STATUS_PHASE,
};
enum dwc3_link_state {
/* In SuperSpeed */
DWC3_LINK_STATE_U0 = 0x00, /* in HS, means ON */
DWC3_LINK_STATE_U1 = 0x01,
DWC3_LINK_STATE_U2 = 0x02, /* in HS, means SLEEP */
DWC3_LINK_STATE_U3 = 0x03, /* in HS, means SUSPEND */
DWC3_LINK_STATE_SS_DIS = 0x04,
DWC3_LINK_STATE_RX_DET = 0x05, /* in HS, means Early Suspend */
DWC3_LINK_STATE_SS_INACT = 0x06,
DWC3_LINK_STATE_POLL = 0x07,
DWC3_LINK_STATE_RECOV = 0x08,
DWC3_LINK_STATE_HRESET = 0x09,
DWC3_LINK_STATE_CMPLY = 0x0a,
DWC3_LINK_STATE_LPBK = 0x0b,
DWC3_LINK_STATE_RESET = 0x0e,
DWC3_LINK_STATE_RESUME = 0x0f,
DWC3_LINK_STATE_MASK = 0x0f,
};
/* TRB Length, PCM and Status */
#define DWC3_TRB_SIZE_MASK (0x00ffffff)
#define DWC3_TRB_SIZE_LENGTH(n) ((n) & DWC3_TRB_SIZE_MASK)
#define DWC3_TRB_SIZE_PCM1(n) (((n) & 0x03) << 24)
#define DWC3_TRB_SIZE_TRBSTS(n) (((n) & (0x0f << 28)) >> 28)
#define DWC3_TRBSTS_OK 0
#define DWC3_TRBSTS_MISSED_ISOC 1
#define DWC3_TRBSTS_SETUP_PENDING 2
#define DWC3_TRB_STS_XFER_IN_PROG 4
/* TRB Control */
#define DWC3_TRB_CTRL_HWO BIT(0)
#define DWC3_TRB_CTRL_LST BIT(1)
#define DWC3_TRB_CTRL_CHN BIT(2)
#define DWC3_TRB_CTRL_CSP BIT(3)
#define DWC3_TRB_CTRL_TRBCTL(n) (((n) & 0x3f) << 4)
#define DWC3_TRB_CTRL_ISP_IMI BIT(10)
#define DWC3_TRB_CTRL_IOC BIT(11)
#define DWC3_TRB_CTRL_SID_SOFN(n) (((n) & 0xffff) << 14)
#define DWC3_TRBCTL_TYPE(n) ((n) & (0x3f << 4))
#define DWC3_TRBCTL_NORMAL DWC3_TRB_CTRL_TRBCTL(1)
#define DWC3_TRBCTL_CONTROL_SETUP DWC3_TRB_CTRL_TRBCTL(2)
#define DWC3_TRBCTL_CONTROL_STATUS2 DWC3_TRB_CTRL_TRBCTL(3)
#define DWC3_TRBCTL_CONTROL_STATUS3 DWC3_TRB_CTRL_TRBCTL(4)
#define DWC3_TRBCTL_CONTROL_DATA DWC3_TRB_CTRL_TRBCTL(5)
#define DWC3_TRBCTL_ISOCHRONOUS_FIRST DWC3_TRB_CTRL_TRBCTL(6)
#define DWC3_TRBCTL_ISOCHRONOUS DWC3_TRB_CTRL_TRBCTL(7)
#define DWC3_TRBCTL_LINK_TRB DWC3_TRB_CTRL_TRBCTL(8)
/**
* struct dwc3_trb - transfer request block (hw format)
* @bpl: DW0-3
* @bph: DW4-7
* @size: DW8-B
* @ctrl: DWC-F
*/
struct dwc3_trb {
u32 bpl;
u32 bph;
u32 size;
u32 ctrl;
} __packed;
/**
* struct dwc3_hwparams - copy of HWPARAMS registers
* @hwparams0: GHWPARAMS0
* @hwparams1: GHWPARAMS1
* @hwparams2: GHWPARAMS2
* @hwparams3: GHWPARAMS3
* @hwparams4: GHWPARAMS4
* @hwparams5: GHWPARAMS5
* @hwparams6: GHWPARAMS6
* @hwparams7: GHWPARAMS7
* @hwparams8: GHWPARAMS8
*/
struct dwc3_hwparams {
u32 hwparams0;
u32 hwparams1;
u32 hwparams2;
u32 hwparams3;
u32 hwparams4;
u32 hwparams5;
u32 hwparams6;
u32 hwparams7;
u32 hwparams8;
};
/* HWPARAMS0 */
#define DWC3_MODE(n) ((n) & 0x7)
#define DWC3_MDWIDTH(n) (((n) & 0xff00) >> 8)
/* HWPARAMS1 */
#define DWC3_NUM_INT(n) (((n) & (0x3f << 15)) >> 15)
/* HWPARAMS3 */
#define DWC3_NUM_IN_EPS_MASK (0x1f << 18)
#define DWC3_NUM_EPS_MASK (0x3f << 12)
#define DWC3_NUM_EPS(p) (((p)->hwparams3 & \
(DWC3_NUM_EPS_MASK)) >> 12)
#define DWC3_NUM_IN_EPS(p) (((p)->hwparams3 & \
(DWC3_NUM_IN_EPS_MASK)) >> 18)
/* HWPARAMS7 */
#define DWC3_RAM1_DEPTH(n) ((n) & 0xffff)
/**
* struct dwc3_request - representation of a transfer request
* @request: struct usb_request to be transferred
* @list: a list_head used for request queueing
* @dep: struct dwc3_ep owning this request
* @sg: pointer to first incomplete sg
* @num_pending_sgs: counter to pending sgs
* @remaining: amount of data remaining
* @epnum: endpoint number to which this request refers
* @trb: pointer to struct dwc3_trb
* @trb_dma: DMA address of @trb
* @unaligned: true for OUT endpoints with length not divisible by maxp
* @direction: IN or OUT direction flag
* @mapped: true when request has been dma-mapped
* @started: request is started
* @zero: wants a ZLP
*/
struct dwc3_request {
struct usb_request request;
struct list_head list;
struct dwc3_ep *dep;
struct scatterlist *sg;
unsigned num_pending_sgs;
unsigned remaining;
u8 epnum;
struct dwc3_trb *trb;
dma_addr_t trb_dma;
unsigned unaligned:1;
unsigned direction:1;
unsigned mapped:1;
unsigned started:1;
unsigned zero:1;
};
/*
* struct dwc3_scratchpad_array - hibernation scratchpad array
* (format defined by hw)
*/
struct dwc3_scratchpad_array {
__le64 dma_adr[DWC3_MAX_HIBER_SCRATCHBUFS];
};
/**
* struct dwc3 - representation of our controller
* @drd_work: workqueue used for role swapping
* @ep0_trb: trb which is used for the ctrl_req
* @bounce: address of bounce buffer
* @scratchbuf: address of scratch buffer
* @setup_buf: used while precessing STD USB requests
* @ep0_trb_addr: dma address of @ep0_trb
* @bounce_addr: dma address of @bounce
* @ep0_usb_req: dummy req used while handling STD USB requests
* @scratch_addr: dma address of scratchbuf
* @ep0_in_setup: one control transfer is completed and enter setup phase
* @lock: for synchronizing
* @dev: pointer to our struct device
* @sysdev: pointer to the DMA-capable device
* @xhci: pointer to our xHCI child
* @xhci_resources: struct resources for our @xhci child
* @ev_buf: struct dwc3_event_buffer pointer
* @eps: endpoint array
* @gadget: device side representation of the peripheral controller
* @gadget_driver: pointer to the gadget driver
* @regs: base address for our registers
* @regs_size: address space size
* @fladj: frame length adjustment
* @irq_gadget: peripheral controller's IRQ number
* @otg_irq: IRQ number for OTG IRQs
* @current_otg_role: current role of operation while using the OTG block
* @desired_otg_role: desired role of operation while using the OTG block
* @otg_restart_host: flag that OTG controller needs to restart host
* @nr_scratch: number of scratch buffers
* @u1u2: only used on revisions <1.83a for workaround
* @maximum_speed: maximum speed requested (mainly for testing purposes)
* @revision: revision register contents
* @dr_mode: requested mode of operation
* @current_dr_role: current role of operation when in dual-role mode
* @desired_dr_role: desired role of operation when in dual-role mode
* @edev: extcon handle
* @edev_nb: extcon notifier
* @hsphy_mode: UTMI phy mode, one of following:
* - USBPHY_INTERFACE_MODE_UTMI
* - USBPHY_INTERFACE_MODE_UTMIW
* @usb2_phy: pointer to USB2 PHY
* @usb3_phy: pointer to USB3 PHY
* @usb2_generic_phy: pointer to USB2 PHY
* @usb3_generic_phy: pointer to USB3 PHY
* @phys_ready: flag to indicate that PHYs are ready
* @ulpi: pointer to ulpi interface
* @ulpi_ready: flag to indicate that ULPI is initialized
* @u2sel: parameter from Set SEL request.
* @u2pel: parameter from Set SEL request.
* @u1sel: parameter from Set SEL request.
* @u1pel: parameter from Set SEL request.
* @num_eps: number of endpoints
* @ep0_next_event: hold the next expected event
* @ep0state: state of endpoint zero
* @link_state: link state
* @speed: device speed (super, high, full, low)
* @hwparams: copy of hwparams registers
* @root: debugfs root folder pointer
* @regset: debugfs pointer to regdump file
* @test_mode: true when we're entering a USB test mode
* @test_mode_nr: test feature selector
* @lpm_nyet_threshold: LPM NYET response threshold
* @hird_threshold: HIRD threshold
* @rx_thr_num_pkt_prd: periodic ESS receive packet count
* @rx_max_burst_prd: max periodic ESS receive burst size
* @tx_thr_num_pkt_prd: periodic ESS transmit packet count
* @tx_max_burst_prd: max periodic ESS transmit burst size
* @hsphy_interface: "utmi" or "ulpi"
* @connected: true when we're connected to a host, false otherwise
* @delayed_status: true when gadget driver asks for delayed status
* @ep0_bounced: true when we used bounce buffer
* @ep0_expect_in: true when we expect a DATA IN transfer
* @has_hibernation: true when dwc3 was configured with Hibernation
* @sysdev_is_parent: true when dwc3 device has a parent driver
* @has_lpm_erratum: true when core was configured with LPM Erratum. Note that
* there's now way for software to detect this in runtime.
* @is_utmi_l1_suspend: the core asserts output signal
* 0 - utmi_sleep_n
* 1 - utmi_l1_suspend_n
* @is_fpga: true when we are using the FPGA board
* @pending_events: true when we have pending IRQs to be handled
* @pullups_connected: true when Run/Stop bit is set
* @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround
* @three_stage_setup: set if we perform a three phase setup
* @usb3_lpm_capable: set if hadrware supports Link Power Management
* @disable_scramble_quirk: set if we enable the disable scramble quirk
* @u2exit_lfps_quirk: set if we enable u2exit lfps quirk
* @u2ss_inp3_quirk: set if we enable P3 OK for U2/SS Inactive quirk
* @req_p1p2p3_quirk: set if we enable request p1p2p3 quirk
* @del_p1p2p3_quirk: set if we enable delay p1p2p3 quirk
* @del_phy_power_chg_quirk: set if we enable delay phy power change quirk
* @lfps_filter_quirk: set if we enable LFPS filter quirk
* @rx_detect_poll_quirk: set if we enable rx_detect to polling lfps quirk
* @dis_u3_susphy_quirk: set if we disable usb3 suspend phy
* @dis_u2_susphy_quirk: set if we disable usb2 suspend phy
* @dis_enblslpm_quirk: set if we clear enblslpm in GUSB2PHYCFG,
* disabling the suspend signal to the PHY.
* @dis_rxdet_inp3_quirk: set if we disable Rx.Detect in P3
* @dis_u2_freeclk_exists_quirk : set if we clear u2_freeclk_exists
* in GUSB2PHYCFG, specify that USB2 PHY doesn't
* provide a free-running PHY clock.
* @dis_del_phy_power_chg_quirk: set if we disable delay phy power
* change quirk.
* @dis_tx_ipgap_linecheck_quirk: set if we disable u2mac linestate
* check during HS transmit.
* @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk
* @tx_de_emphasis: Tx de-emphasis value
* 0 - -6dB de-emphasis
* 1 - -3.5dB de-emphasis
* 2 - No de-emphasis
* 3 - Reserved
* @dis_metastability_quirk: set to disable metastability quirk.
* @imod_interval: set the interrupt moderation interval in 250ns
* increments or 0 to disable.
*/
struct dwc3 {
struct work_struct drd_work;
struct dwc3_trb *ep0_trb;
void *bounce;
void *scratchbuf;
u8 *setup_buf;
dma_addr_t ep0_trb_addr;
dma_addr_t bounce_addr;
dma_addr_t scratch_addr;
struct dwc3_request ep0_usb_req;
struct completion ep0_in_setup;
/* device lock */
spinlock_t lock;
struct device *dev;
struct device *sysdev;
struct platform_device *xhci;
struct resource xhci_resources[DWC3_XHCI_RESOURCES_NUM];
struct dwc3_event_buffer *ev_buf;
struct dwc3_ep *eps[DWC3_ENDPOINTS_NUM];
struct usb_gadget gadget;
struct usb_gadget_driver *gadget_driver;
struct usb_phy *usb2_phy;
struct usb_phy *usb3_phy;
struct phy *usb2_generic_phy;
struct phy *usb3_generic_phy;
bool phys_ready;
struct ulpi *ulpi;
bool ulpi_ready;
void __iomem *regs;
size_t regs_size;
enum usb_dr_mode dr_mode;
u32 current_dr_role;
u32 desired_dr_role;
struct extcon_dev *edev;
struct notifier_block edev_nb;
enum usb_phy_interface hsphy_mode;
u32 fladj;
u32 irq_gadget;
u32 otg_irq;
u32 current_otg_role;
u32 desired_otg_role;
bool otg_restart_host;
u32 nr_scratch;
u32 u1u2;
u32 maximum_speed;
/*
* All 3.1 IP version constants are greater than the 3.0 IP
* version constants. This works for most version checks in
* dwc3. However, in the future, this may not apply as
* features may be developed on newer versions of the 3.0 IP
* that are not in the 3.1 IP.
*/
u32 revision;
#define DWC3_REVISION_173A 0x5533173a
#define DWC3_REVISION_175A 0x5533175a
#define DWC3_REVISION_180A 0x5533180a
#define DWC3_REVISION_183A 0x5533183a
#define DWC3_REVISION_185A 0x5533185a
#define DWC3_REVISION_187A 0x5533187a
#define DWC3_REVISION_188A 0x5533188a
#define DWC3_REVISION_190A 0x5533190a
#define DWC3_REVISION_194A 0x5533194a
#define DWC3_REVISION_200A 0x5533200a
#define DWC3_REVISION_202A 0x5533202a
#define DWC3_REVISION_210A 0x5533210a
#define DWC3_REVISION_220A 0x5533220a
#define DWC3_REVISION_230A 0x5533230a
#define DWC3_REVISION_240A 0x5533240a
#define DWC3_REVISION_250A 0x5533250a
#define DWC3_REVISION_260A 0x5533260a
#define DWC3_REVISION_270A 0x5533270a
#define DWC3_REVISION_280A 0x5533280a
#define DWC3_REVISION_290A 0x5533290a
#define DWC3_REVISION_300A 0x5533300a
#define DWC3_REVISION_310A 0x5533310a
/*
* NOTICE: we're using bit 31 as a "is usb 3.1" flag. This is really
* just so dwc31 revisions are always larger than dwc3.
*/
#define DWC3_REVISION_IS_DWC31 0x80000000
#define DWC3_USB31_REVISION_110A (0x3131302a | DWC3_REVISION_IS_DWC31)
#define DWC3_USB31_REVISION_120A (0x3132302a | DWC3_REVISION_IS_DWC31)
enum dwc3_ep0_next ep0_next_event;
enum dwc3_ep0_state ep0state;
enum dwc3_link_state link_state;
u16 u2sel;
u16 u2pel;
u8 u1sel;
u8 u1pel;
u8 speed;
u8 num_eps;
struct dwc3_hwparams hwparams;
struct dentry *root;
struct debugfs_regset32 *regset;
u8 test_mode;
u8 test_mode_nr;
u8 lpm_nyet_threshold;
u8 hird_threshold;
u8 rx_thr_num_pkt_prd;
u8 rx_max_burst_prd;
u8 tx_thr_num_pkt_prd;
u8 tx_max_burst_prd;
const char *hsphy_interface;
unsigned connected:1;
unsigned delayed_status:1;
unsigned ep0_bounced:1;
unsigned ep0_expect_in:1;
unsigned has_hibernation:1;
unsigned sysdev_is_parent:1;
unsigned has_lpm_erratum:1;
unsigned is_utmi_l1_suspend:1;
unsigned is_fpga:1;
unsigned pending_events:1;
unsigned pullups_connected:1;
unsigned setup_packet_pending:1;
unsigned three_stage_setup:1;
unsigned usb3_lpm_capable:1;
unsigned disable_scramble_quirk:1;
unsigned u2exit_lfps_quirk:1;
unsigned u2ss_inp3_quirk:1;
unsigned req_p1p2p3_quirk:1;
unsigned del_p1p2p3_quirk:1;
unsigned del_phy_power_chg_quirk:1;
unsigned lfps_filter_quirk:1;
unsigned rx_detect_poll_quirk:1;
unsigned dis_u3_susphy_quirk:1;
unsigned dis_u2_susphy_quirk:1;
unsigned dis_enblslpm_quirk:1;
unsigned dis_rxdet_inp3_quirk:1;
unsigned dis_u2_freeclk_exists_quirk:1;
unsigned dis_del_phy_power_chg_quirk:1;
unsigned dis_tx_ipgap_linecheck_quirk:1;
unsigned tx_de_emphasis_quirk:1;
unsigned tx_de_emphasis:2;
unsigned dis_metastability_quirk:1;
u16 imod_interval;
};
#define work_to_dwc(w) (container_of((w), struct dwc3, drd_work))
/* -------------------------------------------------------------------------- */
struct dwc3_event_type {
u32 is_devspec:1;
u32 type:7;
u32 reserved8_31:24;
} __packed;
#define DWC3_DEPEVT_XFERCOMPLETE 0x01
#define DWC3_DEPEVT_XFERINPROGRESS 0x02
#define DWC3_DEPEVT_XFERNOTREADY 0x03
#define DWC3_DEPEVT_RXTXFIFOEVT 0x04
#define DWC3_DEPEVT_STREAMEVT 0x06
#define DWC3_DEPEVT_EPCMDCMPLT 0x07
/**
* struct dwc3_event_depvt - Device Endpoint Events
* @one_bit: indicates this is an endpoint event (not used)
* @endpoint_number: number of the endpoint
* @endpoint_event: The event we have:
* 0x00 - Reserved
* 0x01 - XferComplete
* 0x02 - XferInProgress
* 0x03 - XferNotReady
* 0x04 - RxTxFifoEvt (IN->Underrun, OUT->Overrun)
* 0x05 - Reserved
* 0x06 - StreamEvt
* 0x07 - EPCmdCmplt
* @reserved11_10: Reserved, don't use.
* @status: Indicates the status of the event. Refer to databook for
* more information.
* @parameters: Parameters of the current event. Refer to databook for
* more information.
*/
struct dwc3_event_depevt {
u32 one_bit:1;
u32 endpoint_number:5;
u32 endpoint_event:4;
u32 reserved11_10:2;
u32 status:4;
/* Within XferNotReady */
#define DEPEVT_STATUS_TRANSFER_ACTIVE BIT(3)
/* Within XferComplete */
#define DEPEVT_STATUS_BUSERR BIT(0)
#define DEPEVT_STATUS_SHORT BIT(1)
#define DEPEVT_STATUS_IOC BIT(2)
#define DEPEVT_STATUS_LST BIT(3)
/* Stream event only */
#define DEPEVT_STREAMEVT_FOUND 1
#define DEPEVT_STREAMEVT_NOTFOUND 2
/* Control-only Status */
#define DEPEVT_STATUS_CONTROL_DATA 1
#define DEPEVT_STATUS_CONTROL_STATUS 2
#define DEPEVT_STATUS_CONTROL_PHASE(n) ((n) & 3)
/* In response to Start Transfer */
#define DEPEVT_TRANSFER_NO_RESOURCE 1
#define DEPEVT_TRANSFER_BUS_EXPIRY 2
u32 parameters:16;
/* For Command Complete Events */
#define DEPEVT_PARAMETER_CMD(n) (((n) & (0xf << 8)) >> 8)
} __packed;
/**
* struct dwc3_event_devt - Device Events
* @one_bit: indicates this is a non-endpoint event (not used)
* @device_event: indicates it's a device event. Should read as 0x00
* @type: indicates the type of device event.
* 0 - DisconnEvt
* 1 - USBRst
* 2 - ConnectDone
* 3 - ULStChng
* 4 - WkUpEvt
* 5 - Reserved
* 6 - EOPF
* 7 - SOF
* 8 - Reserved
* 9 - ErrticErr
* 10 - CmdCmplt
* 11 - EvntOverflow
* 12 - VndrDevTstRcved
* @reserved15_12: Reserved, not used
* @event_info: Information about this event
* @reserved31_25: Reserved, not used
*/
struct dwc3_event_devt {
u32 one_bit:1;
u32 device_event:7;
u32 type:4;
u32 reserved15_12:4;
u32 event_info:9;
u32 reserved31_25:7;
} __packed;
/**
* struct dwc3_event_gevt - Other Core Events
* @one_bit: indicates this is a non-endpoint event (not used)
* @device_event: indicates it's (0x03) Carkit or (0x04) I2C event.
* @phy_port_number: self-explanatory
* @reserved31_12: Reserved, not used.
*/
struct dwc3_event_gevt {
u32 one_bit:1;
u32 device_event:7;
u32 phy_port_number:4;
u32 reserved31_12:20;
} __packed;
/**
* union dwc3_event - representation of Event Buffer contents
* @raw: raw 32-bit event
* @type: the type of the event
* @depevt: Device Endpoint Event
* @devt: Device Event
* @gevt: Global Event
*/
union dwc3_event {
u32 raw;
struct dwc3_event_type type;
struct dwc3_event_depevt depevt;
struct dwc3_event_devt devt;
struct dwc3_event_gevt gevt;
};
/**
* struct dwc3_gadget_ep_cmd_params - representation of endpoint command
* parameters
* @param2: third parameter
* @param1: second parameter
* @param0: first parameter
*/
struct dwc3_gadget_ep_cmd_params {
u32 param2;
u32 param1;
u32 param0;
};
/*
* DWC3 Features to be used as Driver Data
*/
#define DWC3_HAS_PERIPHERAL BIT(0)
#define DWC3_HAS_XHCI BIT(1)
#define DWC3_HAS_OTG BIT(3)
/* prototypes */
void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode);
void dwc3_set_mode(struct dwc3 *dwc, u32 mode);
u32 dwc3_core_fifo_space(struct dwc3_ep *dep, u8 type);
/* check whether we are on the DWC_usb3 core */
static inline bool dwc3_is_usb3(struct dwc3 *dwc)
{
return !(dwc->revision & DWC3_REVISION_IS_DWC31);
}
/* check whether we are on the DWC_usb31 core */
static inline bool dwc3_is_usb31(struct dwc3 *dwc)
{
return !!(dwc->revision & DWC3_REVISION_IS_DWC31);
}
bool dwc3_has_imod(struct dwc3 *dwc);
int dwc3_event_buffers_setup(struct dwc3 *dwc);
void dwc3_event_buffers_cleanup(struct dwc3 *dwc);
#if IS_ENABLED(CONFIG_USB_DWC3_HOST) || IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)
int dwc3_host_init(struct dwc3 *dwc);
void dwc3_host_exit(struct dwc3 *dwc);
#else
static inline int dwc3_host_init(struct dwc3 *dwc)
{ return 0; }
static inline void dwc3_host_exit(struct dwc3 *dwc)
{ }
#endif
#if IS_ENABLED(CONFIG_USB_DWC3_GADGET) || IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)
int dwc3_gadget_init(struct dwc3 *dwc);
void dwc3_gadget_exit(struct dwc3 *dwc);
int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode);
int dwc3_gadget_get_link_state(struct dwc3 *dwc);
int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state);
int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd,
struct dwc3_gadget_ep_cmd_params *params);
int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned cmd, u32 param);
#else
static inline int dwc3_gadget_init(struct dwc3 *dwc)
{ return 0; }
static inline void dwc3_gadget_exit(struct dwc3 *dwc)
{ }
static inline int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode)
{ return 0; }
static inline int dwc3_gadget_get_link_state(struct dwc3 *dwc)
{ return 0; }
static inline int dwc3_gadget_set_link_state(struct dwc3 *dwc,
enum dwc3_link_state state)
{ return 0; }
static inline int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd,
struct dwc3_gadget_ep_cmd_params *params)
{ return 0; }
static inline int dwc3_send_gadget_generic_command(struct dwc3 *dwc,
int cmd, u32 param)
{ return 0; }
#endif
#if IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)
int dwc3_drd_init(struct dwc3 *dwc);
void dwc3_drd_exit(struct dwc3 *dwc);
void dwc3_otg_init(struct dwc3 *dwc);
void dwc3_otg_exit(struct dwc3 *dwc);
void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus);
void dwc3_otg_host_init(struct dwc3 *dwc);
#else
static inline int dwc3_drd_init(struct dwc3 *dwc)
{ return 0; }
static inline void dwc3_drd_exit(struct dwc3 *dwc)
{ }
static inline void dwc3_otg_init(struct dwc3 *dwc)
{ }
static inline void dwc3_otg_exit(struct dwc3 *dwc)
{ }
static inline void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus)
{ }
static inline void dwc3_otg_host_init(struct dwc3 *dwc)
{ }
#endif
/* power management interface */
#if !IS_ENABLED(CONFIG_USB_DWC3_HOST)
int dwc3_gadget_suspend(struct dwc3 *dwc);
int dwc3_gadget_resume(struct dwc3 *dwc);
void dwc3_gadget_process_pending_events(struct dwc3 *dwc);
#else
static inline int dwc3_gadget_suspend(struct dwc3 *dwc)
{
return 0;
}
static inline int dwc3_gadget_resume(struct dwc3 *dwc)
{
return 0;
}
static inline void dwc3_gadget_process_pending_events(struct dwc3 *dwc)
{
}
#endif /* !IS_ENABLED(CONFIG_USB_DWC3_HOST) */
#if IS_ENABLED(CONFIG_USB_DWC3_ULPI)
int dwc3_ulpi_init(struct dwc3 *dwc);
void dwc3_ulpi_exit(struct dwc3 *dwc);
#else
static inline int dwc3_ulpi_init(struct dwc3 *dwc)
{ return 0; }
static inline void dwc3_ulpi_exit(struct dwc3 *dwc)
{ }
#endif
#endif /* __DRIVERS_USB_DWC3_CORE_H */