linux-stable/drivers/video/fbdev/s3fb.c

1590 lines
45 KiB
C
Raw Normal View History

/*
* linux/drivers/video/s3fb.c -- Frame buffer device driver for S3 Trio/Virge
*
* Copyright (c) 2006-2007 Ondrej Zajicek <santiago@crfreenet.org>
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
*
* Code is based on David Boucher's viafb (http://davesdomain.org.uk/viafb/)
* which is based on the code of neofb.
*/
#include <linux/aperture.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/tty.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/svga.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/console.h> /* Why should fb driver call console functions? because console_lock() */
#include <video/vga.h>
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
struct s3fb_info {
int chip, rev, mclk_freq;
drivers/video/fbdev/s3fb: Use arch_phys_wc_add() and pci_iomap_wc() This driver uses the same area for MTRR as for the ioremap(). Convert the driver from using the x86-specific MTRR code to the architecture-agnostic arch_phys_wc_add(). It will avoid MTRRs if write-combining is available. In order to take advantage of that also ensure the ioremapped area is requested as write-combining. There are a few motivations for this: a) Take advantage of PAT when available. b) Help bury MTRR code away, MTRR is architecture-specific and on x86 it is being replaced by PAT. c) Help with the goal of eventually using _PAGE_CACHE_UC over _PAGE_CACHE_UC_MINUS on x86 on ioremap_nocache() (see commit de33c442e titled "x86 PAT: fix performance drop for glx, use UC minus for ioremap(), ioremap_nocache() and pci_mmap_page_range()"). The conversion done is expressed by the following Coccinelle SmPL patch, it additionally required manual intervention to address all the ifdeffery and removal of redundant things which arch_phys_wc_add() already addresses such as verbose message about when MTRR fails and doing nothing when we didn't get an MTRR. @ mtrr_found @ expression index, base, size; @@ -index = mtrr_add(base, size, MTRR_TYPE_WRCOMB, 1); +index = arch_phys_wc_add(base, size); @ mtrr_rm depends on mtrr_found @ expression mtrr_found.index, mtrr_found.base, mtrr_found.size; @@ -mtrr_del(index, base, size); +arch_phys_wc_del(index); @ mtrr_rm_zero_arg depends on mtrr_found @ expression mtrr_found.index; @@ -mtrr_del(index, 0, 0); +arch_phys_wc_del(index); @ mtrr_rm_fb_info depends on mtrr_found @ struct fb_info *info; expression mtrr_found.index; @@ -mtrr_del(index, info->fix.smem_start, info->fix.smem_len); +arch_phys_wc_del(index); @ ioremap_replace_nocache depends on mtrr_found @ struct fb_info *info; expression base, size; @@ -info->screen_base = ioremap_nocache(base, size); +info->screen_base = ioremap_wc(base, size); @ ioremap_replace_default depends on mtrr_found @ struct fb_info *info; expression base, size; @@ -info->screen_base = ioremap(base, size); +info->screen_base = ioremap_wc(base, size); Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Antonino Daplas <adaplas@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Juergen Gross <jgross@suse.com> Cc: Lad, Prabhakar <prabhakar.csengg@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Cc: Suresh Siddha <sbsiddha@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: airlied@linux.ie Cc: benh@kernel.crashing.org Cc: bhelgaas@google.com Cc: dan.j.williams@intel.com Cc: konrad.wilk@oracle.com Cc: linux-fbdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: mst@redhat.com Cc: toshi.kani@hp.com Cc: vinod.koul@intel.com Cc: xen-devel@lists.xensource.com Link: http://lkml.kernel.org/r/1440443613-13696-8-git-send-email-mcgrof@do-not-panic.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-24 19:13:29 +00:00
int wc_cookie;
struct vgastate state;
struct mutex open_lock;
unsigned int ref_count;
u32 pseudo_palette[16];
#ifdef CONFIG_FB_S3_DDC
u8 __iomem *mmio;
bool ddc_registered;
struct i2c_adapter ddc_adapter;
struct i2c_algo_bit_data ddc_algo;
#endif
};
/* ------------------------------------------------------------------------- */
static const struct svga_fb_format s3fb_formats[] = {
{ 0, {0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0}, 0,
FB_TYPE_TEXT, FB_AUX_TEXT_SVGA_STEP4, FB_VISUAL_PSEUDOCOLOR, 8, 16},
{ 4, {0, 4, 0}, {0, 4, 0}, {0, 4, 0}, {0, 0, 0}, 0,
FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_PSEUDOCOLOR, 8, 16},
{ 4, {0, 4, 0}, {0, 4, 0}, {0, 4, 0}, {0, 0, 0}, 1,
FB_TYPE_INTERLEAVED_PLANES, 1, FB_VISUAL_PSEUDOCOLOR, 8, 16},
{ 8, {0, 8, 0}, {0, 8, 0}, {0, 8, 0}, {0, 0, 0}, 0,
FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_PSEUDOCOLOR, 4, 8},
{16, {10, 5, 0}, {5, 5, 0}, {0, 5, 0}, {0, 0, 0}, 0,
FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_TRUECOLOR, 2, 4},
{16, {11, 5, 0}, {5, 6, 0}, {0, 5, 0}, {0, 0, 0}, 0,
FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_TRUECOLOR, 2, 4},
{24, {16, 8, 0}, {8, 8, 0}, {0, 8, 0}, {0, 0, 0}, 0,
FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_TRUECOLOR, 1, 2},
{32, {16, 8, 0}, {8, 8, 0}, {0, 8, 0}, {0, 0, 0}, 0,
FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_TRUECOLOR, 1, 2},
SVGA_FORMAT_END
};
static const struct svga_pll s3_pll = {3, 129, 3, 33, 0, 3,
35000, 240000, 14318};
static const struct svga_pll s3_trio3d_pll = {3, 129, 3, 31, 0, 4,
230000, 460000, 14318};
static const int s3_memsizes[] = {4096, 0, 3072, 8192, 2048, 6144, 1024, 512};
static const char * const s3_names[] = {"S3 Unknown", "S3 Trio32", "S3 Trio64", "S3 Trio64V+",
"S3 Trio64UV+", "S3 Trio64V2/DX", "S3 Trio64V2/GX",
"S3 Plato/PX", "S3 Aurora64V+", "S3 Virge",
"S3 Virge/VX", "S3 Virge/DX", "S3 Virge/GX",
"S3 Virge/GX2", "S3 Virge/GX2+", "",
"S3 Trio3D/1X", "S3 Trio3D/2X", "S3 Trio3D/2X",
"S3 Trio3D", "S3 Virge/MX"};
#define CHIP_UNKNOWN 0x00
#define CHIP_732_TRIO32 0x01
#define CHIP_764_TRIO64 0x02
#define CHIP_765_TRIO64VP 0x03
#define CHIP_767_TRIO64UVP 0x04
#define CHIP_775_TRIO64V2_DX 0x05
#define CHIP_785_TRIO64V2_GX 0x06
#define CHIP_551_PLATO_PX 0x07
#define CHIP_M65_AURORA64VP 0x08
#define CHIP_325_VIRGE 0x09
#define CHIP_988_VIRGE_VX 0x0A
#define CHIP_375_VIRGE_DX 0x0B
#define CHIP_385_VIRGE_GX 0x0C
#define CHIP_357_VIRGE_GX2 0x0D
#define CHIP_359_VIRGE_GX2P 0x0E
#define CHIP_360_TRIO3D_1X 0x10
#define CHIP_362_TRIO3D_2X 0x11
#define CHIP_368_TRIO3D_2X 0x12
#define CHIP_365_TRIO3D 0x13
#define CHIP_260_VIRGE_MX 0x14
#define CHIP_XXX_TRIO 0x80
#define CHIP_XXX_TRIO64V2_DXGX 0x81
#define CHIP_XXX_VIRGE_DXGX 0x82
#define CHIP_36X_TRIO3D_1X_2X 0x83
#define CHIP_UNDECIDED_FLAG 0x80
#define CHIP_MASK 0xFF
#define MMIO_OFFSET 0x1000000
#define MMIO_SIZE 0x10000
/* CRT timing register sets */
static const struct vga_regset s3_h_total_regs[] = {{0x00, 0, 7}, {0x5D, 0, 0}, VGA_REGSET_END};
static const struct vga_regset s3_h_display_regs[] = {{0x01, 0, 7}, {0x5D, 1, 1}, VGA_REGSET_END};
static const struct vga_regset s3_h_blank_start_regs[] = {{0x02, 0, 7}, {0x5D, 2, 2}, VGA_REGSET_END};
static const struct vga_regset s3_h_blank_end_regs[] = {{0x03, 0, 4}, {0x05, 7, 7}, VGA_REGSET_END};
static const struct vga_regset s3_h_sync_start_regs[] = {{0x04, 0, 7}, {0x5D, 4, 4}, VGA_REGSET_END};
static const struct vga_regset s3_h_sync_end_regs[] = {{0x05, 0, 4}, VGA_REGSET_END};
static const struct vga_regset s3_v_total_regs[] = {{0x06, 0, 7}, {0x07, 0, 0}, {0x07, 5, 5}, {0x5E, 0, 0}, VGA_REGSET_END};
static const struct vga_regset s3_v_display_regs[] = {{0x12, 0, 7}, {0x07, 1, 1}, {0x07, 6, 6}, {0x5E, 1, 1}, VGA_REGSET_END};
static const struct vga_regset s3_v_blank_start_regs[] = {{0x15, 0, 7}, {0x07, 3, 3}, {0x09, 5, 5}, {0x5E, 2, 2}, VGA_REGSET_END};
static const struct vga_regset s3_v_blank_end_regs[] = {{0x16, 0, 7}, VGA_REGSET_END};
static const struct vga_regset s3_v_sync_start_regs[] = {{0x10, 0, 7}, {0x07, 2, 2}, {0x07, 7, 7}, {0x5E, 4, 4}, VGA_REGSET_END};
static const struct vga_regset s3_v_sync_end_regs[] = {{0x11, 0, 3}, VGA_REGSET_END};
static const struct vga_regset s3_line_compare_regs[] = {{0x18, 0, 7}, {0x07, 4, 4}, {0x09, 6, 6}, {0x5E, 6, 6}, VGA_REGSET_END};
static const struct vga_regset s3_start_address_regs[] = {{0x0d, 0, 7}, {0x0c, 0, 7}, {0x69, 0, 4}, VGA_REGSET_END};
static const struct vga_regset s3_offset_regs[] = {{0x13, 0, 7}, {0x51, 4, 5}, VGA_REGSET_END}; /* set 0x43 bit 2 to 0 */
static const struct vga_regset s3_dtpc_regs[] = {{0x3B, 0, 7}, {0x5D, 6, 6}, VGA_REGSET_END};
static const struct svga_timing_regs s3_timing_regs = {
s3_h_total_regs, s3_h_display_regs, s3_h_blank_start_regs,
s3_h_blank_end_regs, s3_h_sync_start_regs, s3_h_sync_end_regs,
s3_v_total_regs, s3_v_display_regs, s3_v_blank_start_regs,
s3_v_blank_end_regs, s3_v_sync_start_regs, s3_v_sync_end_regs,
};
/* ------------------------------------------------------------------------- */
/* Module parameters */
static char *mode_option;
static int mtrr = 1;
static int fasttext = 1;
MODULE_AUTHOR("(c) 2006-2007 Ondrej Zajicek <santiago@crfreenet.org>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("fbdev driver for S3 Trio/Virge");
module_param(mode_option, charp, 0444);
MODULE_PARM_DESC(mode_option, "Default video mode ('640x480-8@60', etc)");
module_param_named(mode, mode_option, charp, 0444);
MODULE_PARM_DESC(mode, "Default video mode ('640x480-8@60', etc) (deprecated)");
module_param(mtrr, int, 0444);
MODULE_PARM_DESC(mtrr, "Enable write-combining with MTRR (1=enable, 0=disable, default=1)");
module_param(fasttext, int, 0644);
MODULE_PARM_DESC(fasttext, "Enable S3 fast text mode (1=enable, 0=disable, default=1)");
/* ------------------------------------------------------------------------- */
#ifdef CONFIG_FB_S3_DDC
#define DDC_REG 0xaa /* Trio 3D/1X/2X */
#define DDC_MMIO_REG 0xff20 /* all other chips */
#define DDC_SCL_OUT (1 << 0)
#define DDC_SDA_OUT (1 << 1)
#define DDC_SCL_IN (1 << 2)
#define DDC_SDA_IN (1 << 3)
#define DDC_DRIVE_EN (1 << 4)
static bool s3fb_ddc_needs_mmio(int chip)
{
return !(chip == CHIP_360_TRIO3D_1X ||
chip == CHIP_362_TRIO3D_2X ||
chip == CHIP_368_TRIO3D_2X);
}
static u8 s3fb_ddc_read(struct s3fb_info *par)
{
if (s3fb_ddc_needs_mmio(par->chip))
return readb(par->mmio + DDC_MMIO_REG);
else
return vga_rcrt(par->state.vgabase, DDC_REG);
}
static void s3fb_ddc_write(struct s3fb_info *par, u8 val)
{
if (s3fb_ddc_needs_mmio(par->chip))
writeb(val, par->mmio + DDC_MMIO_REG);
else
vga_wcrt(par->state.vgabase, DDC_REG, val);
}
static void s3fb_ddc_setscl(void *data, int val)
{
struct s3fb_info *par = data;
unsigned char reg;
reg = s3fb_ddc_read(par) | DDC_DRIVE_EN;
if (val)
reg |= DDC_SCL_OUT;
else
reg &= ~DDC_SCL_OUT;
s3fb_ddc_write(par, reg);
}
static void s3fb_ddc_setsda(void *data, int val)
{
struct s3fb_info *par = data;
unsigned char reg;
reg = s3fb_ddc_read(par) | DDC_DRIVE_EN;
if (val)
reg |= DDC_SDA_OUT;
else
reg &= ~DDC_SDA_OUT;
s3fb_ddc_write(par, reg);
}
static int s3fb_ddc_getscl(void *data)
{
struct s3fb_info *par = data;
return !!(s3fb_ddc_read(par) & DDC_SCL_IN);
}
static int s3fb_ddc_getsda(void *data)
{
struct s3fb_info *par = data;
return !!(s3fb_ddc_read(par) & DDC_SDA_IN);
}
static int s3fb_setup_ddc_bus(struct fb_info *info)
{
struct s3fb_info *par = info->par;
strscpy(par->ddc_adapter.name, info->fix.id,
sizeof(par->ddc_adapter.name));
par->ddc_adapter.owner = THIS_MODULE;
par->ddc_adapter.algo_data = &par->ddc_algo;
par->ddc_adapter.dev.parent = info->device;
par->ddc_algo.setsda = s3fb_ddc_setsda;
par->ddc_algo.setscl = s3fb_ddc_setscl;
par->ddc_algo.getsda = s3fb_ddc_getsda;
par->ddc_algo.getscl = s3fb_ddc_getscl;
par->ddc_algo.udelay = 10;
par->ddc_algo.timeout = 20;
par->ddc_algo.data = par;
i2c_set_adapdata(&par->ddc_adapter, par);
/*
* some Virge cards have external MUX to switch chip I2C bus between
* DDC and extension pins - switch it do DDC
*/
/* vga_wseq(par->state.vgabase, 0x08, 0x06); - not needed, already unlocked */
if (par->chip == CHIP_357_VIRGE_GX2 ||
par->chip == CHIP_359_VIRGE_GX2P ||
par->chip == CHIP_260_VIRGE_MX)
svga_wseq_mask(par->state.vgabase, 0x0d, 0x01, 0x03);
else
svga_wseq_mask(par->state.vgabase, 0x0d, 0x00, 0x03);
/* some Virge need this or the DDC is ignored */
svga_wcrt_mask(par->state.vgabase, 0x5c, 0x03, 0x03);
return i2c_bit_add_bus(&par->ddc_adapter);
}
#endif /* CONFIG_FB_S3_DDC */
/* ------------------------------------------------------------------------- */
/* Set font in S3 fast text mode */
static void s3fb_settile_fast(struct fb_info *info, struct fb_tilemap *map)
{
const u8 *font = map->data;
u8 __iomem *fb = (u8 __iomem *) info->screen_base;
int i, c;
if ((map->width != 8) || (map->height != 16) ||
(map->depth != 1) || (map->length != 256)) {
fb_err(info, "unsupported font parameters: width %d, height %d, depth %d, length %d\n",
map->width, map->height, map->depth, map->length);
return;
}
fb += 2;
for (i = 0; i < map->height; i++) {
for (c = 0; c < map->length; c++) {
fb_writeb(font[c * map->height + i], fb + c * 4);
}
fb += 1024;
}
}
static void s3fb_tilecursor(struct fb_info *info, struct fb_tilecursor *cursor)
{
struct s3fb_info *par = info->par;
svga_tilecursor(par->state.vgabase, info, cursor);
}
static struct fb_tile_ops s3fb_tile_ops = {
.fb_settile = svga_settile,
.fb_tilecopy = svga_tilecopy,
.fb_tilefill = svga_tilefill,
.fb_tileblit = svga_tileblit,
.fb_tilecursor = s3fb_tilecursor,
.fb_get_tilemax = svga_get_tilemax,
};
static struct fb_tile_ops s3fb_fast_tile_ops = {
.fb_settile = s3fb_settile_fast,
.fb_tilecopy = svga_tilecopy,
.fb_tilefill = svga_tilefill,
.fb_tileblit = svga_tileblit,
.fb_tilecursor = s3fb_tilecursor,
.fb_get_tilemax = svga_get_tilemax,
};
/* ------------------------------------------------------------------------- */
/* image data is MSB-first, fb structure is MSB-first too */
static inline u32 expand_color(u32 c)
{
return ((c & 1) | ((c & 2) << 7) | ((c & 4) << 14) | ((c & 8) << 21)) * 0xFF;
}
/* s3fb_iplan_imageblit silently assumes that almost everything is 8-pixel aligned */
static void s3fb_iplan_imageblit(struct fb_info *info, const struct fb_image *image)
{
u32 fg = expand_color(image->fg_color);
u32 bg = expand_color(image->bg_color);
const u8 *src1, *src;
u8 __iomem *dst1;
u32 __iomem *dst;
u32 val;
int x, y;
src1 = image->data;
dst1 = info->screen_base + (image->dy * info->fix.line_length)
+ ((image->dx / 8) * 4);
for (y = 0; y < image->height; y++) {
src = src1;
dst = (u32 __iomem *) dst1;
for (x = 0; x < image->width; x += 8) {
val = *(src++) * 0x01010101;
val = (val & fg) | (~val & bg);
fb_writel(val, dst++);
}
src1 += image->width / 8;
dst1 += info->fix.line_length;
}
}
/* s3fb_iplan_fillrect silently assumes that almost everything is 8-pixel aligned */
static void s3fb_iplan_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
{
u32 fg = expand_color(rect->color);
u8 __iomem *dst1;
u32 __iomem *dst;
int x, y;
dst1 = info->screen_base + (rect->dy * info->fix.line_length)
+ ((rect->dx / 8) * 4);
for (y = 0; y < rect->height; y++) {
dst = (u32 __iomem *) dst1;
for (x = 0; x < rect->width; x += 8) {
fb_writel(fg, dst++);
}
dst1 += info->fix.line_length;
}
}
/* image data is MSB-first, fb structure is high-nibble-in-low-byte-first */
static inline u32 expand_pixel(u32 c)
{
return (((c & 1) << 24) | ((c & 2) << 27) | ((c & 4) << 14) | ((c & 8) << 17) |
((c & 16) << 4) | ((c & 32) << 7) | ((c & 64) >> 6) | ((c & 128) >> 3)) * 0xF;
}
/* s3fb_cfb4_imageblit silently assumes that almost everything is 8-pixel aligned */
static void s3fb_cfb4_imageblit(struct fb_info *info, const struct fb_image *image)
{
u32 fg = image->fg_color * 0x11111111;
u32 bg = image->bg_color * 0x11111111;
const u8 *src1, *src;
u8 __iomem *dst1;
u32 __iomem *dst;
u32 val;
int x, y;
src1 = image->data;
dst1 = info->screen_base + (image->dy * info->fix.line_length)
+ ((image->dx / 8) * 4);
for (y = 0; y < image->height; y++) {
src = src1;
dst = (u32 __iomem *) dst1;
for (x = 0; x < image->width; x += 8) {
val = expand_pixel(*(src++));
val = (val & fg) | (~val & bg);
fb_writel(val, dst++);
}
src1 += image->width / 8;
dst1 += info->fix.line_length;
}
}
static void s3fb_imageblit(struct fb_info *info, const struct fb_image *image)
{
if ((info->var.bits_per_pixel == 4) && (image->depth == 1)
&& ((image->width % 8) == 0) && ((image->dx % 8) == 0)) {
if (info->fix.type == FB_TYPE_INTERLEAVED_PLANES)
s3fb_iplan_imageblit(info, image);
else
s3fb_cfb4_imageblit(info, image);
} else
cfb_imageblit(info, image);
}
static void s3fb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
{
if ((info->var.bits_per_pixel == 4)
&& ((rect->width % 8) == 0) && ((rect->dx % 8) == 0)
&& (info->fix.type == FB_TYPE_INTERLEAVED_PLANES))
s3fb_iplan_fillrect(info, rect);
else
cfb_fillrect(info, rect);
}
/* ------------------------------------------------------------------------- */
static void s3_set_pixclock(struct fb_info *info, u32 pixclock)
{
struct s3fb_info *par = info->par;
u16 m, n, r;
u8 regval;
int rv;
rv = svga_compute_pll((par->chip == CHIP_365_TRIO3D) ? &s3_trio3d_pll : &s3_pll,
1000000000 / pixclock, &m, &n, &r, info->node);
if (rv < 0) {
fb_err(info, "cannot set requested pixclock, keeping old value\n");
return;
}
/* Set VGA misc register */
regval = vga_r(par->state.vgabase, VGA_MIS_R);
vga_w(par->state.vgabase, VGA_MIS_W, regval | VGA_MIS_ENB_PLL_LOAD);
/* Set S3 clock registers */
if (par->chip == CHIP_357_VIRGE_GX2 ||
par->chip == CHIP_359_VIRGE_GX2P ||
par->chip == CHIP_360_TRIO3D_1X ||
par->chip == CHIP_362_TRIO3D_2X ||
par->chip == CHIP_368_TRIO3D_2X ||
par->chip == CHIP_260_VIRGE_MX) {
vga_wseq(par->state.vgabase, 0x12, (n - 2) | ((r & 3) << 6)); /* n and two bits of r */
vga_wseq(par->state.vgabase, 0x29, r >> 2); /* remaining highest bit of r */
} else
vga_wseq(par->state.vgabase, 0x12, (n - 2) | (r << 5));
vga_wseq(par->state.vgabase, 0x13, m - 2);
udelay(1000);
/* Activate clock - write 0, 1, 0 to seq/15 bit 5 */
regval = vga_rseq (par->state.vgabase, 0x15); /* | 0x80; */
vga_wseq(par->state.vgabase, 0x15, regval & ~(1<<5));
vga_wseq(par->state.vgabase, 0x15, regval | (1<<5));
vga_wseq(par->state.vgabase, 0x15, regval & ~(1<<5));
}
/* Open framebuffer */
static int s3fb_open(struct fb_info *info, int user)
{
struct s3fb_info *par = info->par;
mutex_lock(&(par->open_lock));
if (par->ref_count == 0) {
void __iomem *vgabase = par->state.vgabase;
memset(&(par->state), 0, sizeof(struct vgastate));
par->state.vgabase = vgabase;
par->state.flags = VGA_SAVE_MODE | VGA_SAVE_FONTS | VGA_SAVE_CMAP;
par->state.num_crtc = 0x70;
par->state.num_seq = 0x20;
save_vga(&(par->state));
}
par->ref_count++;
mutex_unlock(&(par->open_lock));
return 0;
}
/* Close framebuffer */
static int s3fb_release(struct fb_info *info, int user)
{
struct s3fb_info *par = info->par;
mutex_lock(&(par->open_lock));
if (par->ref_count == 0) {
mutex_unlock(&(par->open_lock));
return -EINVAL;
}
if (par->ref_count == 1)
restore_vga(&(par->state));
par->ref_count--;
mutex_unlock(&(par->open_lock));
return 0;
}
/* Validate passed in var */
static int s3fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
{
struct s3fb_info *par = info->par;
int rv, mem, step;
u16 m, n, r;
if (!var->pixclock)
return -EINVAL;
/* Find appropriate format */
rv = svga_match_format (s3fb_formats, var, NULL);
/* 32bpp mode is not supported on VIRGE VX,
24bpp is not supported on others */
if ((par->chip == CHIP_988_VIRGE_VX) ? (rv == 7) : (rv == 6))
rv = -EINVAL;
if (rv < 0) {
fb_err(info, "unsupported mode requested\n");
return rv;
}
/* Do not allow to have real resoulution larger than virtual */
if (var->xres > var->xres_virtual)
var->xres_virtual = var->xres;
if (var->yres > var->yres_virtual)
var->yres_virtual = var->yres;
/* Round up xres_virtual to have proper alignment of lines */
step = s3fb_formats[rv].xresstep - 1;
var->xres_virtual = (var->xres_virtual+step) & ~step;
/* Check whether have enough memory */
mem = ((var->bits_per_pixel * var->xres_virtual) >> 3) * var->yres_virtual;
if (mem > info->screen_size) {
fb_err(info, "not enough framebuffer memory (%d kB requested , %u kB available)\n",
mem >> 10, (unsigned int) (info->screen_size >> 10));
return -EINVAL;
}
rv = svga_check_timings (&s3_timing_regs, var, info->node);
if (rv < 0) {
fb_err(info, "invalid timings requested\n");
return rv;
}
rv = svga_compute_pll(&s3_pll, PICOS2KHZ(var->pixclock), &m, &n, &r,
info->node);
if (rv < 0) {
fb_err(info, "invalid pixclock value requested\n");
return rv;
}
return 0;
}
/* Set video mode from par */
static int s3fb_set_par(struct fb_info *info)
{
struct s3fb_info *par = info->par;
u32 value, mode, hmul, offset_value, screen_size, multiplex, dbytes;
u32 bpp = info->var.bits_per_pixel;
u32 htotal, hsstart;
if (bpp != 0) {
info->fix.ypanstep = 1;
info->fix.line_length = (info->var.xres_virtual * bpp) / 8;
info->flags &= ~FBINFO_MISC_TILEBLITTING;
info->tileops = NULL;
/* in 4bpp supports 8p wide tiles only, any tiles otherwise */
if (bpp == 4) {
bitmap_zero(info->pixmap.blit_x, FB_MAX_BLIT_WIDTH);
set_bit(8 - 1, info->pixmap.blit_x);
} else {
bitmap_fill(info->pixmap.blit_x, FB_MAX_BLIT_WIDTH);
}
bitmap_fill(info->pixmap.blit_y, FB_MAX_BLIT_HEIGHT);
offset_value = (info->var.xres_virtual * bpp) / 64;
screen_size = info->var.yres_virtual * info->fix.line_length;
} else {
info->fix.ypanstep = 16;
info->fix.line_length = 0;
info->flags |= FBINFO_MISC_TILEBLITTING;
info->tileops = fasttext ? &s3fb_fast_tile_ops : &s3fb_tile_ops;
/* supports 8x16 tiles only */
bitmap_zero(info->pixmap.blit_x, FB_MAX_BLIT_WIDTH);
set_bit(8 - 1, info->pixmap.blit_x);
bitmap_zero(info->pixmap.blit_y, FB_MAX_BLIT_HEIGHT);
set_bit(16 - 1, info->pixmap.blit_y);
offset_value = info->var.xres_virtual / 16;
screen_size = (info->var.xres_virtual * info->var.yres_virtual) / 64;
}
info->var.xoffset = 0;
info->var.yoffset = 0;
info->var.activate = FB_ACTIVATE_NOW;
/* Unlock registers */
vga_wcrt(par->state.vgabase, 0x38, 0x48);
vga_wcrt(par->state.vgabase, 0x39, 0xA5);
vga_wseq(par->state.vgabase, 0x08, 0x06);
svga_wcrt_mask(par->state.vgabase, 0x11, 0x00, 0x80);
/* Blank screen and turn off sync */
svga_wseq_mask(par->state.vgabase, 0x01, 0x20, 0x20);
svga_wcrt_mask(par->state.vgabase, 0x17, 0x00, 0x80);
/* Set default values */
svga_set_default_gfx_regs(par->state.vgabase);
svga_set_default_atc_regs(par->state.vgabase);
svga_set_default_seq_regs(par->state.vgabase);
svga_set_default_crt_regs(par->state.vgabase);
svga_wcrt_multi(par->state.vgabase, s3_line_compare_regs, 0xFFFFFFFF);
svga_wcrt_multi(par->state.vgabase, s3_start_address_regs, 0);
/* S3 specific initialization */
svga_wcrt_mask(par->state.vgabase, 0x58, 0x10, 0x10); /* enable linear framebuffer */
svga_wcrt_mask(par->state.vgabase, 0x31, 0x08, 0x08); /* enable sequencer access to framebuffer above 256 kB */
/* svga_wcrt_mask(par->state.vgabase, 0x33, 0x08, 0x08); */ /* DDR ? */
/* svga_wcrt_mask(par->state.vgabase, 0x43, 0x01, 0x01); */ /* DDR ? */
svga_wcrt_mask(par->state.vgabase, 0x33, 0x00, 0x08); /* no DDR ? */
svga_wcrt_mask(par->state.vgabase, 0x43, 0x00, 0x01); /* no DDR ? */
svga_wcrt_mask(par->state.vgabase, 0x5D, 0x00, 0x28); /* Clear strange HSlen bits */
/* svga_wcrt_mask(par->state.vgabase, 0x58, 0x03, 0x03); */
/* svga_wcrt_mask(par->state.vgabase, 0x53, 0x12, 0x13); */ /* enable MMIO */
/* svga_wcrt_mask(par->state.vgabase, 0x40, 0x08, 0x08); */ /* enable write buffer */
/* Set the offset register */
fb_dbg(info, "offset register : %d\n", offset_value);
svga_wcrt_multi(par->state.vgabase, s3_offset_regs, offset_value);
if (par->chip != CHIP_357_VIRGE_GX2 &&
par->chip != CHIP_359_VIRGE_GX2P &&
par->chip != CHIP_360_TRIO3D_1X &&
par->chip != CHIP_362_TRIO3D_2X &&
par->chip != CHIP_368_TRIO3D_2X &&
par->chip != CHIP_260_VIRGE_MX) {
vga_wcrt(par->state.vgabase, 0x54, 0x18); /* M parameter */
vga_wcrt(par->state.vgabase, 0x60, 0xff); /* N parameter */
vga_wcrt(par->state.vgabase, 0x61, 0xff); /* L parameter */
vga_wcrt(par->state.vgabase, 0x62, 0xff); /* L parameter */
}
vga_wcrt(par->state.vgabase, 0x3A, 0x35);
svga_wattr(par->state.vgabase, 0x33, 0x00);
if (info->var.vmode & FB_VMODE_DOUBLE)
svga_wcrt_mask(par->state.vgabase, 0x09, 0x80, 0x80);
else
svga_wcrt_mask(par->state.vgabase, 0x09, 0x00, 0x80);
if (info->var.vmode & FB_VMODE_INTERLACED)
svga_wcrt_mask(par->state.vgabase, 0x42, 0x20, 0x20);
else
svga_wcrt_mask(par->state.vgabase, 0x42, 0x00, 0x20);
/* Disable hardware graphics cursor */
svga_wcrt_mask(par->state.vgabase, 0x45, 0x00, 0x01);
/* Disable Streams engine */
svga_wcrt_mask(par->state.vgabase, 0x67, 0x00, 0x0C);
mode = svga_match_format(s3fb_formats, &(info->var), &(info->fix));
/* S3 virge DX hack */
if (par->chip == CHIP_375_VIRGE_DX) {
vga_wcrt(par->state.vgabase, 0x86, 0x80);
vga_wcrt(par->state.vgabase, 0x90, 0x00);
}
/* S3 virge VX hack */
if (par->chip == CHIP_988_VIRGE_VX) {
vga_wcrt(par->state.vgabase, 0x50, 0x00);
vga_wcrt(par->state.vgabase, 0x67, 0x50);
msleep(10); /* screen remains blank sometimes without this */
vga_wcrt(par->state.vgabase, 0x63, (mode <= 2) ? 0x90 : 0x09);
vga_wcrt(par->state.vgabase, 0x66, 0x90);
}
if (par->chip == CHIP_357_VIRGE_GX2 ||
par->chip == CHIP_359_VIRGE_GX2P ||
par->chip == CHIP_360_TRIO3D_1X ||
par->chip == CHIP_362_TRIO3D_2X ||
par->chip == CHIP_368_TRIO3D_2X ||
par->chip == CHIP_365_TRIO3D ||
par->chip == CHIP_375_VIRGE_DX ||
par->chip == CHIP_385_VIRGE_GX ||
par->chip == CHIP_260_VIRGE_MX) {
dbytes = info->var.xres * ((bpp+7)/8);
vga_wcrt(par->state.vgabase, 0x91, (dbytes + 7) / 8);
vga_wcrt(par->state.vgabase, 0x90, (((dbytes + 7) / 8) >> 8) | 0x80);
vga_wcrt(par->state.vgabase, 0x66, 0x81);
}
if (par->chip == CHIP_357_VIRGE_GX2 ||
par->chip == CHIP_359_VIRGE_GX2P ||
par->chip == CHIP_360_TRIO3D_1X ||
par->chip == CHIP_362_TRIO3D_2X ||
par->chip == CHIP_368_TRIO3D_2X ||
par->chip == CHIP_260_VIRGE_MX)
vga_wcrt(par->state.vgabase, 0x34, 0x00);
else /* enable Data Transfer Position Control (DTPC) */
vga_wcrt(par->state.vgabase, 0x34, 0x10);
svga_wcrt_mask(par->state.vgabase, 0x31, 0x00, 0x40);
multiplex = 0;
hmul = 1;
/* Set mode-specific register values */
switch (mode) {
case 0:
fb_dbg(info, "text mode\n");
svga_set_textmode_vga_regs(par->state.vgabase);
/* Set additional registers like in 8-bit mode */
svga_wcrt_mask(par->state.vgabase, 0x50, 0x00, 0x30);
svga_wcrt_mask(par->state.vgabase, 0x67, 0x00, 0xF0);
/* Disable enhanced mode */
svga_wcrt_mask(par->state.vgabase, 0x3A, 0x00, 0x30);
if (fasttext) {
fb_dbg(info, "high speed text mode set\n");
svga_wcrt_mask(par->state.vgabase, 0x31, 0x40, 0x40);
}
break;
case 1:
fb_dbg(info, "4 bit pseudocolor\n");
vga_wgfx(par->state.vgabase, VGA_GFX_MODE, 0x40);
/* Set additional registers like in 8-bit mode */
svga_wcrt_mask(par->state.vgabase, 0x50, 0x00, 0x30);
svga_wcrt_mask(par->state.vgabase, 0x67, 0x00, 0xF0);
/* disable enhanced mode */
svga_wcrt_mask(par->state.vgabase, 0x3A, 0x00, 0x30);
break;
case 2:
fb_dbg(info, "4 bit pseudocolor, planar\n");
/* Set additional registers like in 8-bit mode */
svga_wcrt_mask(par->state.vgabase, 0x50, 0x00, 0x30);
svga_wcrt_mask(par->state.vgabase, 0x67, 0x00, 0xF0);
/* disable enhanced mode */
svga_wcrt_mask(par->state.vgabase, 0x3A, 0x00, 0x30);
break;
case 3:
fb_dbg(info, "8 bit pseudocolor\n");
svga_wcrt_mask(par->state.vgabase, 0x50, 0x00, 0x30);
if (info->var.pixclock > 20000 ||
par->chip == CHIP_357_VIRGE_GX2 ||
par->chip == CHIP_359_VIRGE_GX2P ||
par->chip == CHIP_360_TRIO3D_1X ||
par->chip == CHIP_362_TRIO3D_2X ||
par->chip == CHIP_368_TRIO3D_2X ||
par->chip == CHIP_260_VIRGE_MX)
svga_wcrt_mask(par->state.vgabase, 0x67, 0x00, 0xF0);
else {
svga_wcrt_mask(par->state.vgabase, 0x67, 0x10, 0xF0);
multiplex = 1;
}
break;
case 4:
fb_dbg(info, "5/5/5 truecolor\n");
if (par->chip == CHIP_988_VIRGE_VX) {
if (info->var.pixclock > 20000)
svga_wcrt_mask(par->state.vgabase, 0x67, 0x20, 0xF0);
else
svga_wcrt_mask(par->state.vgabase, 0x67, 0x30, 0xF0);
} else if (par->chip == CHIP_365_TRIO3D) {
svga_wcrt_mask(par->state.vgabase, 0x50, 0x10, 0x30);
if (info->var.pixclock > 8695) {
svga_wcrt_mask(par->state.vgabase, 0x67, 0x30, 0xF0);
hmul = 2;
} else {
svga_wcrt_mask(par->state.vgabase, 0x67, 0x20, 0xF0);
multiplex = 1;
}
} else {
svga_wcrt_mask(par->state.vgabase, 0x50, 0x10, 0x30);
svga_wcrt_mask(par->state.vgabase, 0x67, 0x30, 0xF0);
if (par->chip != CHIP_357_VIRGE_GX2 &&
par->chip != CHIP_359_VIRGE_GX2P &&
par->chip != CHIP_360_TRIO3D_1X &&
par->chip != CHIP_362_TRIO3D_2X &&
par->chip != CHIP_368_TRIO3D_2X &&
par->chip != CHIP_260_VIRGE_MX)
hmul = 2;
}
break;
case 5:
fb_dbg(info, "5/6/5 truecolor\n");
if (par->chip == CHIP_988_VIRGE_VX) {
if (info->var.pixclock > 20000)
svga_wcrt_mask(par->state.vgabase, 0x67, 0x40, 0xF0);
else
svga_wcrt_mask(par->state.vgabase, 0x67, 0x50, 0xF0);
} else if (par->chip == CHIP_365_TRIO3D) {
svga_wcrt_mask(par->state.vgabase, 0x50, 0x10, 0x30);
if (info->var.pixclock > 8695) {
svga_wcrt_mask(par->state.vgabase, 0x67, 0x50, 0xF0);
hmul = 2;
} else {
svga_wcrt_mask(par->state.vgabase, 0x67, 0x40, 0xF0);
multiplex = 1;
}
} else {
svga_wcrt_mask(par->state.vgabase, 0x50, 0x10, 0x30);
svga_wcrt_mask(par->state.vgabase, 0x67, 0x50, 0xF0);
if (par->chip != CHIP_357_VIRGE_GX2 &&
par->chip != CHIP_359_VIRGE_GX2P &&
par->chip != CHIP_360_TRIO3D_1X &&
par->chip != CHIP_362_TRIO3D_2X &&
par->chip != CHIP_368_TRIO3D_2X &&
par->chip != CHIP_260_VIRGE_MX)
hmul = 2;
}
break;
case 6:
/* VIRGE VX case */
fb_dbg(info, "8/8/8 truecolor\n");
svga_wcrt_mask(par->state.vgabase, 0x67, 0xD0, 0xF0);
break;
case 7:
fb_dbg(info, "8/8/8/8 truecolor\n");
svga_wcrt_mask(par->state.vgabase, 0x50, 0x30, 0x30);
svga_wcrt_mask(par->state.vgabase, 0x67, 0xD0, 0xF0);
break;
default:
fb_err(info, "unsupported mode - bug\n");
return -EINVAL;
}
if (par->chip != CHIP_988_VIRGE_VX) {
svga_wseq_mask(par->state.vgabase, 0x15, multiplex ? 0x10 : 0x00, 0x10);
svga_wseq_mask(par->state.vgabase, 0x18, multiplex ? 0x80 : 0x00, 0x80);
}
s3_set_pixclock(info, info->var.pixclock);
svga_set_timings(par->state.vgabase, &s3_timing_regs, &(info->var), hmul, 1,
(info->var.vmode & FB_VMODE_DOUBLE) ? 2 : 1,
(info->var.vmode & FB_VMODE_INTERLACED) ? 2 : 1,
hmul, info->node);
/* Set interlaced mode start/end register */
htotal = info->var.xres + info->var.left_margin + info->var.right_margin + info->var.hsync_len;
htotal = ((htotal * hmul) / 8) - 5;
vga_wcrt(par->state.vgabase, 0x3C, (htotal + 1) / 2);
/* Set Data Transfer Position */
hsstart = ((info->var.xres + info->var.right_margin) * hmul) / 8;
/* + 2 is needed for Virge/VX, does no harm on other cards */
value = clamp((htotal + hsstart + 1) / 2 + 2, hsstart + 4, htotal + 1);
svga_wcrt_multi(par->state.vgabase, s3_dtpc_regs, value);
if (screen_size > info->screen_size)
screen_size = info->screen_size;
memset_io(info->screen_base, 0x00, screen_size);
/* Device and screen back on */
svga_wcrt_mask(par->state.vgabase, 0x17, 0x80, 0x80);
svga_wseq_mask(par->state.vgabase, 0x01, 0x00, 0x20);
return 0;
}
/* Set a colour register */
static int s3fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
u_int transp, struct fb_info *fb)
{
switch (fb->var.bits_per_pixel) {
case 0:
case 4:
if (regno >= 16)
return -EINVAL;
if ((fb->var.bits_per_pixel == 4) &&
(fb->var.nonstd == 0)) {
outb(0xF0, VGA_PEL_MSK);
outb(regno*16, VGA_PEL_IW);
} else {
outb(0x0F, VGA_PEL_MSK);
outb(regno, VGA_PEL_IW);
}
outb(red >> 10, VGA_PEL_D);
outb(green >> 10, VGA_PEL_D);
outb(blue >> 10, VGA_PEL_D);
break;
case 8:
if (regno >= 256)
return -EINVAL;
outb(0xFF, VGA_PEL_MSK);
outb(regno, VGA_PEL_IW);
outb(red >> 10, VGA_PEL_D);
outb(green >> 10, VGA_PEL_D);
outb(blue >> 10, VGA_PEL_D);
break;
case 16:
if (regno >= 16)
return 0;
if (fb->var.green.length == 5)
((u32*)fb->pseudo_palette)[regno] = ((red & 0xF800) >> 1) |
((green & 0xF800) >> 6) | ((blue & 0xF800) >> 11);
else if (fb->var.green.length == 6)
((u32*)fb->pseudo_palette)[regno] = (red & 0xF800) |
((green & 0xFC00) >> 5) | ((blue & 0xF800) >> 11);
else return -EINVAL;
break;
case 24:
case 32:
if (regno >= 16)
return 0;
((u32*)fb->pseudo_palette)[regno] = ((red & 0xFF00) << 8) |
(green & 0xFF00) | ((blue & 0xFF00) >> 8);
break;
default:
return -EINVAL;
}
return 0;
}
/* Set the display blanking state */
static int s3fb_blank(int blank_mode, struct fb_info *info)
{
struct s3fb_info *par = info->par;
switch (blank_mode) {
case FB_BLANK_UNBLANK:
fb_dbg(info, "unblank\n");
svga_wcrt_mask(par->state.vgabase, 0x56, 0x00, 0x06);
svga_wseq_mask(par->state.vgabase, 0x01, 0x00, 0x20);
break;
case FB_BLANK_NORMAL:
fb_dbg(info, "blank\n");
svga_wcrt_mask(par->state.vgabase, 0x56, 0x00, 0x06);
svga_wseq_mask(par->state.vgabase, 0x01, 0x20, 0x20);
break;
case FB_BLANK_HSYNC_SUSPEND:
fb_dbg(info, "hsync\n");
svga_wcrt_mask(par->state.vgabase, 0x56, 0x02, 0x06);
svga_wseq_mask(par->state.vgabase, 0x01, 0x20, 0x20);
break;
case FB_BLANK_VSYNC_SUSPEND:
fb_dbg(info, "vsync\n");
svga_wcrt_mask(par->state.vgabase, 0x56, 0x04, 0x06);
svga_wseq_mask(par->state.vgabase, 0x01, 0x20, 0x20);
break;
case FB_BLANK_POWERDOWN:
fb_dbg(info, "sync down\n");
svga_wcrt_mask(par->state.vgabase, 0x56, 0x06, 0x06);
svga_wseq_mask(par->state.vgabase, 0x01, 0x20, 0x20);
break;
}
return 0;
}
/* Pan the display */
static int s3fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
{
struct s3fb_info *par = info->par;
unsigned int offset;
/* Calculate the offset */
if (info->var.bits_per_pixel == 0) {
offset = (var->yoffset / 16) * (info->var.xres_virtual / 2)
+ (var->xoffset / 2);
offset = offset >> 2;
} else {
offset = (var->yoffset * info->fix.line_length) +
(var->xoffset * info->var.bits_per_pixel / 8);
offset = offset >> 2;
}
/* Set the offset */
svga_wcrt_multi(par->state.vgabase, s3_start_address_regs, offset);
return 0;
}
/* ------------------------------------------------------------------------- */
/* Frame buffer operations */
static const struct fb_ops s3fb_ops = {
.owner = THIS_MODULE,
.fb_open = s3fb_open,
.fb_release = s3fb_release,
__FB_DEFAULT_IOMEM_OPS_RDWR,
.fb_check_var = s3fb_check_var,
.fb_set_par = s3fb_set_par,
.fb_setcolreg = s3fb_setcolreg,
.fb_blank = s3fb_blank,
.fb_pan_display = s3fb_pan_display,
.fb_fillrect = s3fb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = s3fb_imageblit,
__FB_DEFAULT_IOMEM_OPS_MMAP,
.fb_get_caps = svga_get_caps,
};
/* ------------------------------------------------------------------------- */
static int s3_identification(struct s3fb_info *par)
{
int chip = par->chip;
if (chip == CHIP_XXX_TRIO) {
u8 cr30 = vga_rcrt(par->state.vgabase, 0x30);
u8 cr2e = vga_rcrt(par->state.vgabase, 0x2e);
u8 cr2f = vga_rcrt(par->state.vgabase, 0x2f);
if ((cr30 == 0xE0) || (cr30 == 0xE1)) {
if (cr2e == 0x10)
return CHIP_732_TRIO32;
if (cr2e == 0x11) {
if (! (cr2f & 0x40))
return CHIP_764_TRIO64;
else
return CHIP_765_TRIO64VP;
}
}
}
if (chip == CHIP_XXX_TRIO64V2_DXGX) {
u8 cr6f = vga_rcrt(par->state.vgabase, 0x6f);
if (! (cr6f & 0x01))
return CHIP_775_TRIO64V2_DX;
else
return CHIP_785_TRIO64V2_GX;
}
if (chip == CHIP_XXX_VIRGE_DXGX) {
u8 cr6f = vga_rcrt(par->state.vgabase, 0x6f);
if (! (cr6f & 0x01))
return CHIP_375_VIRGE_DX;
else
return CHIP_385_VIRGE_GX;
}
if (chip == CHIP_36X_TRIO3D_1X_2X) {
switch (vga_rcrt(par->state.vgabase, 0x2f)) {
case 0x00:
return CHIP_360_TRIO3D_1X;
case 0x01:
return CHIP_362_TRIO3D_2X;
case 0x02:
return CHIP_368_TRIO3D_2X;
}
}
return CHIP_UNKNOWN;
}
/* PCI probe */
static int s3_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
struct pci_bus_region bus_reg;
struct resource vga_res;
struct fb_info *info;
struct s3fb_info *par;
int rc;
u8 regval, cr38, cr39;
bool found = false;
/* Ignore secondary VGA device because there is no VGA arbitration */
if (! svga_primary_device(dev)) {
dev_info(&(dev->dev), "ignoring secondary device\n");
return -ENODEV;
}
rc = aperture_remove_conflicting_pci_devices(dev, "s3fb");
if (rc)
return rc;
/* Allocate and fill driver data structure */
info = framebuffer_alloc(sizeof(struct s3fb_info), &(dev->dev));
if (!info)
return -ENOMEM;
par = info->par;
mutex_init(&par->open_lock);
info->flags = FBINFO_PARTIAL_PAN_OK | FBINFO_HWACCEL_YPAN;
info->fbops = &s3fb_ops;
/* Prepare PCI device */
rc = pci_enable_device(dev);
if (rc < 0) {
dev_err(info->device, "cannot enable PCI device\n");
goto err_enable_device;
}
rc = pci_request_regions(dev, "s3fb");
if (rc < 0) {
dev_err(info->device, "cannot reserve framebuffer region\n");
goto err_request_regions;
}
info->fix.smem_start = pci_resource_start(dev, 0);
info->fix.smem_len = pci_resource_len(dev, 0);
/* Map physical IO memory address into kernel space */
drivers/video/fbdev/s3fb: Use arch_phys_wc_add() and pci_iomap_wc() This driver uses the same area for MTRR as for the ioremap(). Convert the driver from using the x86-specific MTRR code to the architecture-agnostic arch_phys_wc_add(). It will avoid MTRRs if write-combining is available. In order to take advantage of that also ensure the ioremapped area is requested as write-combining. There are a few motivations for this: a) Take advantage of PAT when available. b) Help bury MTRR code away, MTRR is architecture-specific and on x86 it is being replaced by PAT. c) Help with the goal of eventually using _PAGE_CACHE_UC over _PAGE_CACHE_UC_MINUS on x86 on ioremap_nocache() (see commit de33c442e titled "x86 PAT: fix performance drop for glx, use UC minus for ioremap(), ioremap_nocache() and pci_mmap_page_range()"). The conversion done is expressed by the following Coccinelle SmPL patch, it additionally required manual intervention to address all the ifdeffery and removal of redundant things which arch_phys_wc_add() already addresses such as verbose message about when MTRR fails and doing nothing when we didn't get an MTRR. @ mtrr_found @ expression index, base, size; @@ -index = mtrr_add(base, size, MTRR_TYPE_WRCOMB, 1); +index = arch_phys_wc_add(base, size); @ mtrr_rm depends on mtrr_found @ expression mtrr_found.index, mtrr_found.base, mtrr_found.size; @@ -mtrr_del(index, base, size); +arch_phys_wc_del(index); @ mtrr_rm_zero_arg depends on mtrr_found @ expression mtrr_found.index; @@ -mtrr_del(index, 0, 0); +arch_phys_wc_del(index); @ mtrr_rm_fb_info depends on mtrr_found @ struct fb_info *info; expression mtrr_found.index; @@ -mtrr_del(index, info->fix.smem_start, info->fix.smem_len); +arch_phys_wc_del(index); @ ioremap_replace_nocache depends on mtrr_found @ struct fb_info *info; expression base, size; @@ -info->screen_base = ioremap_nocache(base, size); +info->screen_base = ioremap_wc(base, size); @ ioremap_replace_default depends on mtrr_found @ struct fb_info *info; expression base, size; @@ -info->screen_base = ioremap(base, size); +info->screen_base = ioremap_wc(base, size); Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Antonino Daplas <adaplas@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Juergen Gross <jgross@suse.com> Cc: Lad, Prabhakar <prabhakar.csengg@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Cc: Suresh Siddha <sbsiddha@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: airlied@linux.ie Cc: benh@kernel.crashing.org Cc: bhelgaas@google.com Cc: dan.j.williams@intel.com Cc: konrad.wilk@oracle.com Cc: linux-fbdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: mst@redhat.com Cc: toshi.kani@hp.com Cc: vinod.koul@intel.com Cc: xen-devel@lists.xensource.com Link: http://lkml.kernel.org/r/1440443613-13696-8-git-send-email-mcgrof@do-not-panic.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-24 19:13:29 +00:00
info->screen_base = pci_iomap_wc(dev, 0, 0);
if (! info->screen_base) {
rc = -ENOMEM;
dev_err(info->device, "iomap for framebuffer failed\n");
goto err_iomap;
}
bus_reg.start = 0;
bus_reg.end = 64 * 1024;
vga_res.flags = IORESOURCE_IO;
pcibios_bus_to_resource(dev->bus, &vga_res, &bus_reg);
par->state.vgabase = (void __iomem *) (unsigned long) vga_res.start;
/* Unlock regs */
cr38 = vga_rcrt(par->state.vgabase, 0x38);
cr39 = vga_rcrt(par->state.vgabase, 0x39);
vga_wseq(par->state.vgabase, 0x08, 0x06);
vga_wcrt(par->state.vgabase, 0x38, 0x48);
vga_wcrt(par->state.vgabase, 0x39, 0xA5);
/* Identify chip type */
par->chip = id->driver_data & CHIP_MASK;
par->rev = vga_rcrt(par->state.vgabase, 0x2f);
if (par->chip & CHIP_UNDECIDED_FLAG)
par->chip = s3_identification(par);
/* Find how many physical memory there is on card */
/* 0x36 register is accessible even if other registers are locked */
regval = vga_rcrt(par->state.vgabase, 0x36);
if (par->chip == CHIP_360_TRIO3D_1X ||
par->chip == CHIP_362_TRIO3D_2X ||
par->chip == CHIP_368_TRIO3D_2X ||
par->chip == CHIP_365_TRIO3D) {
switch ((regval & 0xE0) >> 5) {
case 0: /* 8MB -- only 4MB usable for display */
case 1: /* 4MB with 32-bit bus */
case 2: /* 4MB */
info->screen_size = 4 << 20;
break;
case 4: /* 2MB on 365 Trio3D */
case 6: /* 2MB */
info->screen_size = 2 << 20;
break;
}
} else if (par->chip == CHIP_357_VIRGE_GX2 ||
par->chip == CHIP_359_VIRGE_GX2P ||
par->chip == CHIP_260_VIRGE_MX) {
switch ((regval & 0xC0) >> 6) {
case 1: /* 4MB */
info->screen_size = 4 << 20;
break;
case 3: /* 2MB */
info->screen_size = 2 << 20;
break;
}
} else if (par->chip == CHIP_988_VIRGE_VX) {
switch ((regval & 0x60) >> 5) {
case 0: /* 2MB */
info->screen_size = 2 << 20;
break;
case 1: /* 4MB */
info->screen_size = 4 << 20;
break;
case 2: /* 6MB */
info->screen_size = 6 << 20;
break;
case 3: /* 8MB */
info->screen_size = 8 << 20;
break;
}
/* off-screen memory */
regval = vga_rcrt(par->state.vgabase, 0x37);
switch ((regval & 0x60) >> 5) {
case 1: /* 4MB */
info->screen_size -= 4 << 20;
break;
case 2: /* 2MB */
info->screen_size -= 2 << 20;
break;
}
} else
info->screen_size = s3_memsizes[regval >> 5] << 10;
info->fix.smem_len = info->screen_size;
/* Find MCLK frequency */
regval = vga_rseq(par->state.vgabase, 0x10);
par->mclk_freq = ((vga_rseq(par->state.vgabase, 0x11) + 2) * 14318) / ((regval & 0x1F) + 2);
par->mclk_freq = par->mclk_freq >> (regval >> 5);
/* Restore locks */
vga_wcrt(par->state.vgabase, 0x38, cr38);
vga_wcrt(par->state.vgabase, 0x39, cr39);
strcpy(info->fix.id, s3_names [par->chip]);
info->fix.mmio_start = 0;
info->fix.mmio_len = 0;
info->fix.type = FB_TYPE_PACKED_PIXELS;
info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
info->fix.ypanstep = 0;
info->fix.accel = FB_ACCEL_NONE;
info->pseudo_palette = (void*) (par->pseudo_palette);
info->var.bits_per_pixel = 8;
#ifdef CONFIG_FB_S3_DDC
/* Enable MMIO if needed */
if (s3fb_ddc_needs_mmio(par->chip)) {
par->mmio = ioremap(info->fix.smem_start + MMIO_OFFSET, MMIO_SIZE);
if (par->mmio)
svga_wcrt_mask(par->state.vgabase, 0x53, 0x08, 0x08); /* enable MMIO */
else
dev_err(info->device, "unable to map MMIO at 0x%lx, disabling DDC",
info->fix.smem_start + MMIO_OFFSET);
}
if (!s3fb_ddc_needs_mmio(par->chip) || par->mmio)
if (s3fb_setup_ddc_bus(info) == 0) {
u8 *edid = fb_ddc_read(&par->ddc_adapter);
par->ddc_registered = true;
if (edid) {
fb_edid_to_monspecs(edid, &info->monspecs);
kfree(edid);
if (!info->monspecs.modedb)
dev_err(info->device, "error getting mode database\n");
else {
const struct fb_videomode *m;
fb_videomode_to_modelist(info->monspecs.modedb,
info->monspecs.modedb_len,
&info->modelist);
m = fb_find_best_display(&info->monspecs, &info->modelist);
if (m) {
fb_videomode_to_var(&info->var, m);
/* fill all other info->var's fields */
if (s3fb_check_var(&info->var, info) == 0)
found = true;
}
}
}
}
#endif
if (!mode_option && !found)
mode_option = "640x480-8@60";
/* Prepare startup mode */
if (mode_option) {
rc = fb_find_mode(&info->var, info, mode_option,
info->monspecs.modedb, info->monspecs.modedb_len,
NULL, info->var.bits_per_pixel);
if (!rc || rc == 4) {
rc = -EINVAL;
dev_err(info->device, "mode %s not found\n", mode_option);
fb_destroy_modedb(info->monspecs.modedb);
info->monspecs.modedb = NULL;
goto err_find_mode;
}
}
fb_destroy_modedb(info->monspecs.modedb);
info->monspecs.modedb = NULL;
/* maximize virtual vertical size for fast scrolling */
info->var.yres_virtual = info->fix.smem_len * 8 /
(info->var.bits_per_pixel * info->var.xres_virtual);
if (info->var.yres_virtual < info->var.yres) {
dev_err(info->device, "virtual vertical size smaller than real\n");
rc = -EINVAL;
goto err_find_mode;
}
rc = fb_alloc_cmap(&info->cmap, 256, 0);
if (rc < 0) {
dev_err(info->device, "cannot allocate colormap\n");
goto err_alloc_cmap;
}
rc = register_framebuffer(info);
if (rc < 0) {
dev_err(info->device, "cannot register framebuffer\n");
goto err_reg_fb;
}
fb_info(info, "%s on %s, %d MB RAM, %d MHz MCLK\n",
info->fix.id, pci_name(dev),
info->fix.smem_len >> 20, (par->mclk_freq + 500) / 1000);
if (par->chip == CHIP_UNKNOWN)
fb_info(info, "unknown chip, CR2D=%x, CR2E=%x, CRT2F=%x, CRT30=%x\n",
vga_rcrt(par->state.vgabase, 0x2d),
vga_rcrt(par->state.vgabase, 0x2e),
vga_rcrt(par->state.vgabase, 0x2f),
vga_rcrt(par->state.vgabase, 0x30));
/* Record a reference to the driver data */
pci_set_drvdata(dev, info);
drivers/video/fbdev/s3fb: Use arch_phys_wc_add() and pci_iomap_wc() This driver uses the same area for MTRR as for the ioremap(). Convert the driver from using the x86-specific MTRR code to the architecture-agnostic arch_phys_wc_add(). It will avoid MTRRs if write-combining is available. In order to take advantage of that also ensure the ioremapped area is requested as write-combining. There are a few motivations for this: a) Take advantage of PAT when available. b) Help bury MTRR code away, MTRR is architecture-specific and on x86 it is being replaced by PAT. c) Help with the goal of eventually using _PAGE_CACHE_UC over _PAGE_CACHE_UC_MINUS on x86 on ioremap_nocache() (see commit de33c442e titled "x86 PAT: fix performance drop for glx, use UC minus for ioremap(), ioremap_nocache() and pci_mmap_page_range()"). The conversion done is expressed by the following Coccinelle SmPL patch, it additionally required manual intervention to address all the ifdeffery and removal of redundant things which arch_phys_wc_add() already addresses such as verbose message about when MTRR fails and doing nothing when we didn't get an MTRR. @ mtrr_found @ expression index, base, size; @@ -index = mtrr_add(base, size, MTRR_TYPE_WRCOMB, 1); +index = arch_phys_wc_add(base, size); @ mtrr_rm depends on mtrr_found @ expression mtrr_found.index, mtrr_found.base, mtrr_found.size; @@ -mtrr_del(index, base, size); +arch_phys_wc_del(index); @ mtrr_rm_zero_arg depends on mtrr_found @ expression mtrr_found.index; @@ -mtrr_del(index, 0, 0); +arch_phys_wc_del(index); @ mtrr_rm_fb_info depends on mtrr_found @ struct fb_info *info; expression mtrr_found.index; @@ -mtrr_del(index, info->fix.smem_start, info->fix.smem_len); +arch_phys_wc_del(index); @ ioremap_replace_nocache depends on mtrr_found @ struct fb_info *info; expression base, size; @@ -info->screen_base = ioremap_nocache(base, size); +info->screen_base = ioremap_wc(base, size); @ ioremap_replace_default depends on mtrr_found @ struct fb_info *info; expression base, size; @@ -info->screen_base = ioremap(base, size); +info->screen_base = ioremap_wc(base, size); Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Antonino Daplas <adaplas@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Juergen Gross <jgross@suse.com> Cc: Lad, Prabhakar <prabhakar.csengg@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Cc: Suresh Siddha <sbsiddha@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: airlied@linux.ie Cc: benh@kernel.crashing.org Cc: bhelgaas@google.com Cc: dan.j.williams@intel.com Cc: konrad.wilk@oracle.com Cc: linux-fbdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: mst@redhat.com Cc: toshi.kani@hp.com Cc: vinod.koul@intel.com Cc: xen-devel@lists.xensource.com Link: http://lkml.kernel.org/r/1440443613-13696-8-git-send-email-mcgrof@do-not-panic.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-24 19:13:29 +00:00
if (mtrr)
par->wc_cookie = arch_phys_wc_add(info->fix.smem_start,
info->fix.smem_len);
return 0;
/* Error handling */
err_reg_fb:
fb_dealloc_cmap(&info->cmap);
err_alloc_cmap:
err_find_mode:
#ifdef CONFIG_FB_S3_DDC
if (par->ddc_registered)
i2c_del_adapter(&par->ddc_adapter);
if (par->mmio)
iounmap(par->mmio);
#endif
pci_iounmap(dev, info->screen_base);
err_iomap:
pci_release_regions(dev);
err_request_regions:
/* pci_disable_device(dev); */
err_enable_device:
framebuffer_release(info);
return rc;
}
/* PCI remove */
static void s3_pci_remove(struct pci_dev *dev)
{
struct fb_info *info = pci_get_drvdata(dev);
struct s3fb_info __maybe_unused *par;
if (info) {
par = info->par;
drivers/video/fbdev/s3fb: Use arch_phys_wc_add() and pci_iomap_wc() This driver uses the same area for MTRR as for the ioremap(). Convert the driver from using the x86-specific MTRR code to the architecture-agnostic arch_phys_wc_add(). It will avoid MTRRs if write-combining is available. In order to take advantage of that also ensure the ioremapped area is requested as write-combining. There are a few motivations for this: a) Take advantage of PAT when available. b) Help bury MTRR code away, MTRR is architecture-specific and on x86 it is being replaced by PAT. c) Help with the goal of eventually using _PAGE_CACHE_UC over _PAGE_CACHE_UC_MINUS on x86 on ioremap_nocache() (see commit de33c442e titled "x86 PAT: fix performance drop for glx, use UC minus for ioremap(), ioremap_nocache() and pci_mmap_page_range()"). The conversion done is expressed by the following Coccinelle SmPL patch, it additionally required manual intervention to address all the ifdeffery and removal of redundant things which arch_phys_wc_add() already addresses such as verbose message about when MTRR fails and doing nothing when we didn't get an MTRR. @ mtrr_found @ expression index, base, size; @@ -index = mtrr_add(base, size, MTRR_TYPE_WRCOMB, 1); +index = arch_phys_wc_add(base, size); @ mtrr_rm depends on mtrr_found @ expression mtrr_found.index, mtrr_found.base, mtrr_found.size; @@ -mtrr_del(index, base, size); +arch_phys_wc_del(index); @ mtrr_rm_zero_arg depends on mtrr_found @ expression mtrr_found.index; @@ -mtrr_del(index, 0, 0); +arch_phys_wc_del(index); @ mtrr_rm_fb_info depends on mtrr_found @ struct fb_info *info; expression mtrr_found.index; @@ -mtrr_del(index, info->fix.smem_start, info->fix.smem_len); +arch_phys_wc_del(index); @ ioremap_replace_nocache depends on mtrr_found @ struct fb_info *info; expression base, size; @@ -info->screen_base = ioremap_nocache(base, size); +info->screen_base = ioremap_wc(base, size); @ ioremap_replace_default depends on mtrr_found @ struct fb_info *info; expression base, size; @@ -info->screen_base = ioremap(base, size); +info->screen_base = ioremap_wc(base, size); Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Antonino Daplas <adaplas@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Juergen Gross <jgross@suse.com> Cc: Lad, Prabhakar <prabhakar.csengg@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Cc: Suresh Siddha <sbsiddha@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: airlied@linux.ie Cc: benh@kernel.crashing.org Cc: bhelgaas@google.com Cc: dan.j.williams@intel.com Cc: konrad.wilk@oracle.com Cc: linux-fbdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: mst@redhat.com Cc: toshi.kani@hp.com Cc: vinod.koul@intel.com Cc: xen-devel@lists.xensource.com Link: http://lkml.kernel.org/r/1440443613-13696-8-git-send-email-mcgrof@do-not-panic.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-24 19:13:29 +00:00
arch_phys_wc_del(par->wc_cookie);
unregister_framebuffer(info);
fb_dealloc_cmap(&info->cmap);
#ifdef CONFIG_FB_S3_DDC
if (par->ddc_registered)
i2c_del_adapter(&par->ddc_adapter);
if (par->mmio)
iounmap(par->mmio);
#endif
pci_iounmap(dev, info->screen_base);
pci_release_regions(dev);
/* pci_disable_device(dev); */
framebuffer_release(info);
}
}
/* PCI suspend */
fbdev: s3fb: use generic power management Drivers should do only device-specific jobs. But in general, drivers using legacy PCI PM framework for .suspend()/.resume() have to manage many PCI PM-related tasks themselves which can be done by PCI Core itself. This brings extra load on the driver and it directly calls PCI helper functions to handle them. Switch to the new generic framework by updating function signatures and define a "struct dev_pm_ops" variable to bind PM callbacks. Also, remove unnecessary calls to the PCI Helper functions along with the legacy .suspend & .resume bindings. The s3_pci_suspend() is not designed to function in the case of Freeze. Thus, the code checked for "if (state.event == PM_EVENT_FREEZE....)". This is because, in the legacy framework, this callback was invoked even in the event of Freeze. Hence, added the load of unnecessary function-call. The goal can be achieved by binding the callback with only ".suspend" and ".poweroff" in the "s3_pci_pm_ops" const variable. This also avoids the step of checking "state.event == PM_EVENT_FREEZE" every time the callback is invoked. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Cc: Bjorn Helgaas <helgaas@kernel.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Bjorn Helgaas <bjorn@helgaas.com> Cc: Vaibhav Gupta <vaibhav.varodek@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Andres Salomon <dilinger@queued.net> CC: Antonino Daplas <adaplas@gmail.com> Cc: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200819185654.151170-12-vaibhavgupta40@gmail.com
2020-08-19 18:56:53 +00:00
static int __maybe_unused s3_pci_suspend(struct device *dev)
{
fbdev: s3fb: use generic power management Drivers should do only device-specific jobs. But in general, drivers using legacy PCI PM framework for .suspend()/.resume() have to manage many PCI PM-related tasks themselves which can be done by PCI Core itself. This brings extra load on the driver and it directly calls PCI helper functions to handle them. Switch to the new generic framework by updating function signatures and define a "struct dev_pm_ops" variable to bind PM callbacks. Also, remove unnecessary calls to the PCI Helper functions along with the legacy .suspend & .resume bindings. The s3_pci_suspend() is not designed to function in the case of Freeze. Thus, the code checked for "if (state.event == PM_EVENT_FREEZE....)". This is because, in the legacy framework, this callback was invoked even in the event of Freeze. Hence, added the load of unnecessary function-call. The goal can be achieved by binding the callback with only ".suspend" and ".poweroff" in the "s3_pci_pm_ops" const variable. This also avoids the step of checking "state.event == PM_EVENT_FREEZE" every time the callback is invoked. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Cc: Bjorn Helgaas <helgaas@kernel.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Bjorn Helgaas <bjorn@helgaas.com> Cc: Vaibhav Gupta <vaibhav.varodek@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Andres Salomon <dilinger@queued.net> CC: Antonino Daplas <adaplas@gmail.com> Cc: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200819185654.151170-12-vaibhavgupta40@gmail.com
2020-08-19 18:56:53 +00:00
struct fb_info *info = dev_get_drvdata(dev);
struct s3fb_info *par = info->par;
dev_info(info->device, "suspend\n");
console_lock();
mutex_lock(&(par->open_lock));
fbdev: s3fb: use generic power management Drivers should do only device-specific jobs. But in general, drivers using legacy PCI PM framework for .suspend()/.resume() have to manage many PCI PM-related tasks themselves which can be done by PCI Core itself. This brings extra load on the driver and it directly calls PCI helper functions to handle them. Switch to the new generic framework by updating function signatures and define a "struct dev_pm_ops" variable to bind PM callbacks. Also, remove unnecessary calls to the PCI Helper functions along with the legacy .suspend & .resume bindings. The s3_pci_suspend() is not designed to function in the case of Freeze. Thus, the code checked for "if (state.event == PM_EVENT_FREEZE....)". This is because, in the legacy framework, this callback was invoked even in the event of Freeze. Hence, added the load of unnecessary function-call. The goal can be achieved by binding the callback with only ".suspend" and ".poweroff" in the "s3_pci_pm_ops" const variable. This also avoids the step of checking "state.event == PM_EVENT_FREEZE" every time the callback is invoked. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Cc: Bjorn Helgaas <helgaas@kernel.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Bjorn Helgaas <bjorn@helgaas.com> Cc: Vaibhav Gupta <vaibhav.varodek@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Andres Salomon <dilinger@queued.net> CC: Antonino Daplas <adaplas@gmail.com> Cc: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200819185654.151170-12-vaibhavgupta40@gmail.com
2020-08-19 18:56:53 +00:00
if (par->ref_count == 0) {
mutex_unlock(&(par->open_lock));
console_unlock();
return 0;
}
fb_set_suspend(info, 1);
mutex_unlock(&(par->open_lock));
console_unlock();
return 0;
}
/* PCI resume */
fbdev: s3fb: use generic power management Drivers should do only device-specific jobs. But in general, drivers using legacy PCI PM framework for .suspend()/.resume() have to manage many PCI PM-related tasks themselves which can be done by PCI Core itself. This brings extra load on the driver and it directly calls PCI helper functions to handle them. Switch to the new generic framework by updating function signatures and define a "struct dev_pm_ops" variable to bind PM callbacks. Also, remove unnecessary calls to the PCI Helper functions along with the legacy .suspend & .resume bindings. The s3_pci_suspend() is not designed to function in the case of Freeze. Thus, the code checked for "if (state.event == PM_EVENT_FREEZE....)". This is because, in the legacy framework, this callback was invoked even in the event of Freeze. Hence, added the load of unnecessary function-call. The goal can be achieved by binding the callback with only ".suspend" and ".poweroff" in the "s3_pci_pm_ops" const variable. This also avoids the step of checking "state.event == PM_EVENT_FREEZE" every time the callback is invoked. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Cc: Bjorn Helgaas <helgaas@kernel.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Bjorn Helgaas <bjorn@helgaas.com> Cc: Vaibhav Gupta <vaibhav.varodek@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Andres Salomon <dilinger@queued.net> CC: Antonino Daplas <adaplas@gmail.com> Cc: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200819185654.151170-12-vaibhavgupta40@gmail.com
2020-08-19 18:56:53 +00:00
static int __maybe_unused s3_pci_resume(struct device *dev)
{
fbdev: s3fb: use generic power management Drivers should do only device-specific jobs. But in general, drivers using legacy PCI PM framework for .suspend()/.resume() have to manage many PCI PM-related tasks themselves which can be done by PCI Core itself. This brings extra load on the driver and it directly calls PCI helper functions to handle them. Switch to the new generic framework by updating function signatures and define a "struct dev_pm_ops" variable to bind PM callbacks. Also, remove unnecessary calls to the PCI Helper functions along with the legacy .suspend & .resume bindings. The s3_pci_suspend() is not designed to function in the case of Freeze. Thus, the code checked for "if (state.event == PM_EVENT_FREEZE....)". This is because, in the legacy framework, this callback was invoked even in the event of Freeze. Hence, added the load of unnecessary function-call. The goal can be achieved by binding the callback with only ".suspend" and ".poweroff" in the "s3_pci_pm_ops" const variable. This also avoids the step of checking "state.event == PM_EVENT_FREEZE" every time the callback is invoked. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Cc: Bjorn Helgaas <helgaas@kernel.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Bjorn Helgaas <bjorn@helgaas.com> Cc: Vaibhav Gupta <vaibhav.varodek@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Andres Salomon <dilinger@queued.net> CC: Antonino Daplas <adaplas@gmail.com> Cc: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200819185654.151170-12-vaibhavgupta40@gmail.com
2020-08-19 18:56:53 +00:00
struct fb_info *info = dev_get_drvdata(dev);
struct s3fb_info *par = info->par;
dev_info(info->device, "resume\n");
console_lock();
mutex_lock(&(par->open_lock));
if (par->ref_count == 0) {
mutex_unlock(&(par->open_lock));
console_unlock();
return 0;
}
s3fb_set_par(info);
fb_set_suspend(info, 0);
mutex_unlock(&(par->open_lock));
console_unlock();
return 0;
}
fbdev: s3fb: use generic power management Drivers should do only device-specific jobs. But in general, drivers using legacy PCI PM framework for .suspend()/.resume() have to manage many PCI PM-related tasks themselves which can be done by PCI Core itself. This brings extra load on the driver and it directly calls PCI helper functions to handle them. Switch to the new generic framework by updating function signatures and define a "struct dev_pm_ops" variable to bind PM callbacks. Also, remove unnecessary calls to the PCI Helper functions along with the legacy .suspend & .resume bindings. The s3_pci_suspend() is not designed to function in the case of Freeze. Thus, the code checked for "if (state.event == PM_EVENT_FREEZE....)". This is because, in the legacy framework, this callback was invoked even in the event of Freeze. Hence, added the load of unnecessary function-call. The goal can be achieved by binding the callback with only ".suspend" and ".poweroff" in the "s3_pci_pm_ops" const variable. This also avoids the step of checking "state.event == PM_EVENT_FREEZE" every time the callback is invoked. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Cc: Bjorn Helgaas <helgaas@kernel.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Bjorn Helgaas <bjorn@helgaas.com> Cc: Vaibhav Gupta <vaibhav.varodek@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Andres Salomon <dilinger@queued.net> CC: Antonino Daplas <adaplas@gmail.com> Cc: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200819185654.151170-12-vaibhavgupta40@gmail.com
2020-08-19 18:56:53 +00:00
static const struct dev_pm_ops s3_pci_pm_ops = {
#ifdef CONFIG_PM_SLEEP
.suspend = s3_pci_suspend,
.resume = s3_pci_resume,
.freeze = NULL,
.thaw = s3_pci_resume,
.poweroff = s3_pci_suspend,
.restore = s3_pci_resume,
#endif
};
/* List of boards that we are trying to support */
static const struct pci_device_id s3_devices[] = {
{PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8810), .driver_data = CHIP_XXX_TRIO},
{PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8811), .driver_data = CHIP_XXX_TRIO},
{PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8812), .driver_data = CHIP_M65_AURORA64VP},
{PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8814), .driver_data = CHIP_767_TRIO64UVP},
{PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8901), .driver_data = CHIP_XXX_TRIO64V2_DXGX},
{PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8902), .driver_data = CHIP_551_PLATO_PX},
{PCI_DEVICE(PCI_VENDOR_ID_S3, 0x5631), .driver_data = CHIP_325_VIRGE},
{PCI_DEVICE(PCI_VENDOR_ID_S3, 0x883D), .driver_data = CHIP_988_VIRGE_VX},
{PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8A01), .driver_data = CHIP_XXX_VIRGE_DXGX},
{PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8A10), .driver_data = CHIP_357_VIRGE_GX2},
{PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8A11), .driver_data = CHIP_359_VIRGE_GX2P},
{PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8A12), .driver_data = CHIP_359_VIRGE_GX2P},
{PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8A13), .driver_data = CHIP_36X_TRIO3D_1X_2X},
{PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8904), .driver_data = CHIP_365_TRIO3D},
{PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8C01), .driver_data = CHIP_260_VIRGE_MX},
{0, 0, 0, 0, 0, 0, 0}
};
MODULE_DEVICE_TABLE(pci, s3_devices);
static struct pci_driver s3fb_pci_driver = {
.name = "s3fb",
.id_table = s3_devices,
.probe = s3_pci_probe,
.remove = s3_pci_remove,
fbdev: s3fb: use generic power management Drivers should do only device-specific jobs. But in general, drivers using legacy PCI PM framework for .suspend()/.resume() have to manage many PCI PM-related tasks themselves which can be done by PCI Core itself. This brings extra load on the driver and it directly calls PCI helper functions to handle them. Switch to the new generic framework by updating function signatures and define a "struct dev_pm_ops" variable to bind PM callbacks. Also, remove unnecessary calls to the PCI Helper functions along with the legacy .suspend & .resume bindings. The s3_pci_suspend() is not designed to function in the case of Freeze. Thus, the code checked for "if (state.event == PM_EVENT_FREEZE....)". This is because, in the legacy framework, this callback was invoked even in the event of Freeze. Hence, added the load of unnecessary function-call. The goal can be achieved by binding the callback with only ".suspend" and ".poweroff" in the "s3_pci_pm_ops" const variable. This also avoids the step of checking "state.event == PM_EVENT_FREEZE" every time the callback is invoked. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Cc: Bjorn Helgaas <helgaas@kernel.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Bjorn Helgaas <bjorn@helgaas.com> Cc: Vaibhav Gupta <vaibhav.varodek@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Andres Salomon <dilinger@queued.net> CC: Antonino Daplas <adaplas@gmail.com> Cc: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200819185654.151170-12-vaibhavgupta40@gmail.com
2020-08-19 18:56:53 +00:00
.driver.pm = &s3_pci_pm_ops,
};
/* Parse user specified options */
#ifndef MODULE
static int __init s3fb_setup(char *options)
{
char *opt;
if (!options || !*options)
return 0;
while ((opt = strsep(&options, ",")) != NULL) {
if (!*opt)
continue;
else if (!strncmp(opt, "mtrr:", 5))
mtrr = simple_strtoul(opt + 5, NULL, 0);
else if (!strncmp(opt, "fasttext:", 9))
fasttext = simple_strtoul(opt + 9, NULL, 0);
else
mode_option = opt;
}
return 0;
}
#endif
/* Cleanup */
static void __exit s3fb_cleanup(void)
{
pr_debug("s3fb: cleaning up\n");
pci_unregister_driver(&s3fb_pci_driver);
}
/* Driver Initialisation */
static int __init s3fb_init(void)
{
#ifndef MODULE
char *option = NULL;
#endif
if (fb_modesetting_disabled("s3fb"))
return -ENODEV;
#ifndef MODULE
if (fb_get_options("s3fb", &option))
return -ENODEV;
s3fb_setup(option);
#endif
pr_debug("s3fb: initializing\n");
return pci_register_driver(&s3fb_pci_driver);
}
/* ------------------------------------------------------------------------- */
/* Modularization */
module_init(s3fb_init);
module_exit(s3fb_cleanup);