linux-stable/drivers/acpi/bus.c

1455 lines
39 KiB
C
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157 Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-27 06:55:06 +00:00
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* acpi_bus.c - ACPI Bus Driver ($Revision: 80 $)
*
* Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
*/
#define pr_fmt(fmt) "ACPI: " fmt
#include <linux/module.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/sched.h>
#include <linux/pm.h>
#include <linux/device.h>
#include <linux/proc_fs.h>
#include <linux/acpi.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
ACPI / init: Flag use of ACPI and ACPI idioms for power supplies to regulator API There is currently no facility in ACPI to express the hookup of voltage regulators, the expectation is that the regulators that exist in the system will be handled transparently by firmware if they need software control at all. This means that if for some reason the regulator API is enabled on such a system it should assume that any supplies that devices need are provided by the system at all relevant times without any software intervention. Tell the regulator core to make this assumption by calling regulator_has_full_constraints(). Do this as soon as we know we are using ACPI so that the information is available to the regulator core as early as possible. This will cause the regulator core to pretend that there is an always on regulator supplying any supply that is requested but that has not otherwise been mapped which is the behaviour expected on a system with ACPI. Should the ability to specify regulators be added in future revisions of ACPI then once we have support for ACPI mappings in the kernel the same assumptions will apply. It is also likely that systems will default to a mode of operation which does not require any interpretation of these mappings in order to be compatible with existing operating system releases so it should remain safe to make these assumptions even if the mappings exist but are not supported by the kernel. Signed-off-by: Mark Brown <broonie@linaro.org> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-27 00:32:14 +00:00
#include <linux/regulator/machine.h>
#include <linux/workqueue.h>
#include <linux/reboot.h>
#include <linux/delay.h>
#ifdef CONFIG_X86
#include <asm/mpspec.h>
#include <linux/dmi.h>
#endif
#include <linux/acpi_viot.h>
x86: validate against acpi motherboard resources This path adds validation of the MMCONFIG table against the ACPI reserved motherboard resources. If the MMCONFIG table is found to be reserved in ACPI, we don't bother checking the E820 table. The PCI Express firmware spec apparently tells BIOS developers that reservation in ACPI is required and E820 reservation is optional, so checking against ACPI first makes sense. Many BIOSes don't reserve the MMCONFIG region in E820 even though it is perfectly functional, the existing check needlessly disables MMCONFIG in these cases. In order to do this, MMCONFIG setup has been split into two phases. If PCI configuration type 1 is not available then MMCONFIG is enabled early as before. Otherwise, it is enabled later after the ACPI interpreter is enabled, since we need to be able to execute control methods in order to check the ACPI reserved resources. Presently this is just triggered off the end of ACPI interpreter initialization. There are a few other behavioral changes here: - Validate all MMCONFIG configurations provided, not just the first one. - Validate the entire required length of each configuration according to the provided ending bus number is reserved, not just the minimum required allocation. - Validate that the area is reserved even if we read it from the chipset directly and not from the MCFG table. This catches the case where the BIOS didn't set the location properly in the chipset and has mapped it over other things it shouldn't have. This also cleans up the MMCONFIG initialization functions so that they simply do nothing if MMCONFIG is not compiled in. Based on an original patch by Rajesh Shah from Intel. [akpm@linux-foundation.org: many fixes and cleanups] Signed-off-by: Robert Hancock <hancockr@shaw.ca> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andi Kleen <ak@suse.de> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andi Kleen <ak@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-15 09:27:20 +00:00
#include <linux/pci.h>
#include <acpi/apei.h>
#include <linux/suspend.h>
ACPI: PRM: implement OperationRegion handler for the PlatformRtMechanism subtype Platform Runtime Mechanism (PRM) is a firmware interface that exposes a set of binary executables that can either be called from the AML interpreter or device drivers by bypassing the AML interpreter. This change implements the AML interpreter path. According to the specification [1], PRM services are listed in an ACPI table called the PRMT. This patch parses module and handler information listed in the PRMT and registers the PlatformRtMechanism OpRegion handler before ACPI tables are loaded. Each service is defined by a 16-byte GUID and called from writing a 26-byte ASL buffer containing the identifier to a FieldUnit object defined inside a PlatformRtMechanism OperationRegion. OperationRegion (PRMR, PlatformRtMechanism, 0, 26) Field (PRMR, BufferAcc, NoLock, Preserve) { PRMF, 208 // Write to this field to invoke the OperationRegion Handler } The 26-byte ASL buffer is defined as the following: Byte Offset Byte Length Description ============================================================= 0 1 PRM OperationRegion handler status 1 8 PRM service status 9 1 PRM command 10 16 PRM handler GUID The ASL caller fills out a 26-byte buffer containing the PRM command and the PRM handler GUID like so: /* Local0 is the PRM data buffer */ Local0 = buffer (26){} /* Create byte fields over the buffer */ CreateByteField (Local0, 0x9, CMD) CreateField (Local0, 0x50, 0x80, GUID) /* Fill in the command and data fields of the data buffer */ CMD = 0 // run command GUID = ToUUID("xxxx-xx-xxx-xxxx") /* * Invoke PRM service with an ID that matches GUID and save the * result. */ Local0 = (\_SB.PRMT.PRMF = Local0) Byte offset 0 - 8 are written by the handler as a status passed back to AML and used by ASL like so: /* Create byte fields over the buffer */ CreateByteField (Local0, 0x0, PSTA) CreateQWordField (Local0, 0x1, USTA) In this ASL code, PSTA contains a status from the OperationRegion and USTA contains a status from the PRM service. The 26-byte buffer is recieved by acpi_platformrt_space_handler. This handler will look at the command value and the handler guid and take the approperiate actions. Command value Action ===================================================================== 0 Run the PRM service indicated by the PRM handler GUID (bytes 10-26) 1 Prevent PRM runtime updates from happening to the service's parent module 2 Allow PRM updates from happening to the service's parent module This patch enables command value 0. Link: https://uefi.org/sites/default/files/resources/Platform%20Runtime%20Mechanism%20-%20with%20legal%20notice.pdf # [1] Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-10 03:41:52 +00:00
#include <linux/prmt.h>
#include "internal.h"
struct acpi_device *acpi_root;
struct proc_dir_entry *acpi_root_dir;
EXPORT_SYMBOL(acpi_root_dir);
#ifdef CONFIG_X86
#ifdef CONFIG_ACPI_CUSTOM_DSDT
static inline int set_copy_dsdt(const struct dmi_system_id *id)
{
return 0;
}
#else
static int set_copy_dsdt(const struct dmi_system_id *id)
{
pr_notice("%s detected - force copy of DSDT to local memory\n", id->ident);
acpi_gbl_copy_dsdt_locally = 1;
return 0;
}
#endif
static const struct dmi_system_id dsdt_dmi_table[] __initconst = {
/*
* Invoke DSDT corruption work-around on all Toshiba Satellite.
* https://bugzilla.kernel.org/show_bug.cgi?id=14679
*/
{
.callback = set_copy_dsdt,
.ident = "TOSHIBA Satellite",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
DMI_MATCH(DMI_PRODUCT_NAME, "Satellite"),
},
},
{}
};
#endif
/* --------------------------------------------------------------------------
Device Management
-------------------------------------------------------------------------- */
acpi_status acpi_bus_get_status_handle(acpi_handle handle,
unsigned long long *sta)
{
acpi_status status;
status = acpi_evaluate_integer(handle, "_STA", NULL, sta);
if (ACPI_SUCCESS(status))
return AE_OK;
if (status == AE_NOT_FOUND) {
*sta = ACPI_STA_DEVICE_PRESENT | ACPI_STA_DEVICE_ENABLED |
ACPI_STA_DEVICE_UI | ACPI_STA_DEVICE_FUNCTIONING;
return AE_OK;
}
return status;
}
EXPORT_SYMBOL_GPL(acpi_bus_get_status_handle);
int acpi_bus_get_status(struct acpi_device *device)
{
acpi_status status;
unsigned long long sta;
if (acpi_device_override_status(device, &sta)) {
acpi_set_device_status(device, sta);
return 0;
}
/* Battery devices must have their deps met before calling _STA */
if (acpi_device_is_battery(device) && device->dep_unmet) {
acpi_set_device_status(device, 0);
return 0;
}
status = acpi_bus_get_status_handle(device->handle, &sta);
if (ACPI_FAILURE(status))
return -ENODEV;
acpi_set_device_status(device, sta);
if (device->status.functional && !device->status.present) {
pr_debug("Device [%s] status [%08x]: functional but not present\n",
device->pnp.bus_id, (u32)sta);
}
pr_debug("Device [%s] status [%08x]\n", device->pnp.bus_id, (u32)sta);
return 0;
}
EXPORT_SYMBOL(acpi_bus_get_status);
void acpi_bus_private_data_handler(acpi_handle handle,
void *context)
{
return;
}
EXPORT_SYMBOL(acpi_bus_private_data_handler);
int acpi_bus_attach_private_data(acpi_handle handle, void *data)
{
acpi_status status;
status = acpi_attach_data(handle,
acpi_bus_private_data_handler, data);
if (ACPI_FAILURE(status)) {
acpi_handle_debug(handle, "Error attaching device data\n");
return -ENODEV;
}
return 0;
}
EXPORT_SYMBOL_GPL(acpi_bus_attach_private_data);
int acpi_bus_get_private_data(acpi_handle handle, void **data)
{
acpi_status status;
if (!data)
return -EINVAL;
status = acpi_get_data(handle, acpi_bus_private_data_handler, data);
if (ACPI_FAILURE(status)) {
acpi_handle_debug(handle, "No context for object\n");
return -ENODEV;
}
return 0;
}
EXPORT_SYMBOL_GPL(acpi_bus_get_private_data);
void acpi_bus_detach_private_data(acpi_handle handle)
{
acpi_detach_data(handle, acpi_bus_private_data_handler);
}
EXPORT_SYMBOL_GPL(acpi_bus_detach_private_data);
static void acpi_print_osc_error(acpi_handle handle,
struct acpi_osc_context *context, char *error)
{
int i;
acpi_handle_debug(handle, "(%s): %s\n", context->uuid_str, error);
pr_debug("_OSC request data:");
for (i = 0; i < context->cap.length; i += sizeof(u32))
pr_debug(" %x", *((u32 *)(context->cap.pointer + i)));
pr_debug("\n");
}
acpi_status acpi_run_osc(acpi_handle handle, struct acpi_osc_context *context)
{
acpi_status status;
struct acpi_object_list input;
union acpi_object in_params[4];
union acpi_object *out_obj;
guid_t guid;
u32 errors;
struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL};
if (!context)
return AE_ERROR;
if (guid_parse(context->uuid_str, &guid))
return AE_ERROR;
context->ret.length = ACPI_ALLOCATE_BUFFER;
context->ret.pointer = NULL;
/* Setting up input parameters */
input.count = 4;
input.pointer = in_params;
in_params[0].type = ACPI_TYPE_BUFFER;
in_params[0].buffer.length = 16;
in_params[0].buffer.pointer = (u8 *)&guid;
in_params[1].type = ACPI_TYPE_INTEGER;
in_params[1].integer.value = context->rev;
in_params[2].type = ACPI_TYPE_INTEGER;
in_params[2].integer.value = context->cap.length/sizeof(u32);
in_params[3].type = ACPI_TYPE_BUFFER;
in_params[3].buffer.length = context->cap.length;
in_params[3].buffer.pointer = context->cap.pointer;
status = acpi_evaluate_object(handle, "_OSC", &input, &output);
if (ACPI_FAILURE(status))
return status;
if (!output.length)
return AE_NULL_OBJECT;
out_obj = output.pointer;
if (out_obj->type != ACPI_TYPE_BUFFER
|| out_obj->buffer.length != context->cap.length) {
acpi_print_osc_error(handle, context,
"_OSC evaluation returned wrong type");
status = AE_TYPE;
goto out_kfree;
}
/* Need to ignore the bit0 in result code */
errors = *((u32 *)out_obj->buffer.pointer) & ~(1 << 0);
if (errors) {
if (errors & OSC_REQUEST_ERROR)
acpi_print_osc_error(handle, context,
"_OSC request failed");
if (errors & OSC_INVALID_UUID_ERROR)
acpi_print_osc_error(handle, context,
"_OSC invalid UUID");
if (errors & OSC_INVALID_REVISION_ERROR)
acpi_print_osc_error(handle, context,
"_OSC invalid revision");
if (errors & OSC_CAPABILITIES_MASK_ERROR) {
if (((u32 *)context->cap.pointer)[OSC_QUERY_DWORD]
& OSC_QUERY_ENABLE)
goto out_success;
status = AE_SUPPORT;
goto out_kfree;
}
status = AE_ERROR;
goto out_kfree;
}
out_success:
context->ret.length = out_obj->buffer.length;
context->ret.pointer = kmemdup(out_obj->buffer.pointer,
context->ret.length, GFP_KERNEL);
if (!context->ret.pointer) {
status = AE_NO_MEMORY;
goto out_kfree;
}
status = AE_OK;
out_kfree:
kfree(output.pointer);
return status;
}
EXPORT_SYMBOL(acpi_run_osc);
bool osc_sb_apei_support_acked;
/*
* ACPI 6.0 Section 8.4.4.2 Idle State Coordination
* OSPM supports platform coordinated low power idle(LPI) states
*/
bool osc_pc_lpi_support_confirmed;
EXPORT_SYMBOL_GPL(osc_pc_lpi_support_confirmed);
/*
* ACPI 6.2 Section 6.2.11.2 'Platform-Wide OSPM Capabilities':
* Starting with ACPI Specification 6.2, all _CPC registers can be in
* PCC, System Memory, System IO, or Functional Fixed Hardware address
* spaces. OSPM support for this more flexible register space scheme is
* indicated by the Flexible Address Space for CPPC Registers _OSC bit.
*
* Otherwise (cf ACPI 6.1, s8.4.7.1.1.X), _CPC registers must be in:
* - PCC or Functional Fixed Hardware address space if defined
* - SystemMemory address space (NULL register) if not defined
*/
bool osc_cpc_flexible_adr_space_confirmed;
EXPORT_SYMBOL_GPL(osc_cpc_flexible_adr_space_confirmed);
/*
* ACPI 6.4 Operating System Capabilities for USB.
*/
bool osc_sb_native_usb4_support_confirmed;
EXPORT_SYMBOL_GPL(osc_sb_native_usb4_support_confirmed);
ACPI: CPPC: Only probe for _CPC if CPPC v2 is acked Previously the kernel used to ignore whether the firmware masked CPPC or CPPCv2 and would just pretend that it worked. When support for the USB4 bit in _OSC was introduced from commit 9e1f561afb ("ACPI: Execute platform _OSC also with query bit clear") the kernel began to look at the return when the query bit was clear. This caused regressions that were misdiagnosed and attempted to be solved as part of commit 2ca8e6285250 ("Revert "ACPI: Pass the same capabilities to the _OSC regardless of the query flag""). This caused a different regression where non-Intel systems weren't able to negotiate _OSC properly. This was reverted in commit 2ca8e6285250 ("Revert "ACPI: Pass the same capabilities to the _OSC regardless of the query flag"") and attempted to be fixed by commit c42fa24b4475 ("ACPI: bus: Avoid using CPPC if not supported by firmware") but the regression still returned. These systems with the regression only load support for CPPC from an SSDT dynamically when _OSC reports CPPC v2. Avoid the problem by not letting CPPC satisfy the requirement in `acpi_cppc_processor_probe`. Reported-by: CUI Hao <cuihao.leo@gmail.com> Reported-by: maxim.novozhilov@gmail.com Reported-by: lethe.tree@protonmail.com Reported-by: garystephenwright@gmail.com Reported-by: galaxyking0419@gmail.com Fixes: c42fa24b4475 ("ACPI: bus: Avoid using CPPC if not supported by firmware") Fixes: 2ca8e6285250 ("Revert "ACPI Pass the same capabilities to the _OSC regardless of the query flag"") Link: https://bugzilla.kernel.org/show_bug.cgi?id=213023 Link: https://bugzilla.redhat.com/show_bug.cgi?id=2075387 Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: CUI Hao <cuihao.leo@gmail.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-05 18:29:14 +00:00
bool osc_sb_cppc2_support_acked;
static u8 sb_uuid_str[] = "0811B06E-4A27-44F9-8D60-3CBBC22E7B48";
static void acpi_bus_osc_negotiate_platform_control(void)
{
u32 capbuf[2], *capbuf_ret;
struct acpi_osc_context context = {
.uuid_str = sb_uuid_str,
.rev = 1,
.cap.length = 8,
.cap.pointer = capbuf,
};
acpi_handle handle;
capbuf[OSC_QUERY_DWORD] = OSC_QUERY_ENABLE;
capbuf[OSC_SUPPORT_DWORD] = OSC_SB_PR3_SUPPORT; /* _PR3 is in use */
if (IS_ENABLED(CONFIG_ACPI_PROCESSOR_AGGREGATOR))
capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_PAD_SUPPORT;
if (IS_ENABLED(CONFIG_ACPI_PROCESSOR))
capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_PPC_OST_SUPPORT;
capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_HOTPLUG_OST_SUPPORT;
capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_PCLPI_SUPPORT;
if (IS_ENABLED(CONFIG_ACPI_PRMT))
capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_PRM_SUPPORT;
if (IS_ENABLED(CONFIG_ACPI_FFH))
capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_FFH_OPR_SUPPORT;
#ifdef CONFIG_ARM64
capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_GENERIC_INITIATOR_SUPPORT;
#endif
#ifdef CONFIG_X86
capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_GENERIC_INITIATOR_SUPPORT;
#endif
#ifdef CONFIG_ACPI_CPPC_LIB
capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_CPC_SUPPORT;
capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_CPCV2_SUPPORT;
#endif
capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_CPC_FLEXIBLE_ADR_SPACE;
if (IS_ENABLED(CONFIG_SCHED_MC_PRIO))
capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_CPC_DIVERSE_HIGH_SUPPORT;
if (IS_ENABLED(CONFIG_USB4))
capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_NATIVE_USB4_SUPPORT;
if (!ghes_disable)
capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_APEI_SUPPORT;
if (ACPI_FAILURE(acpi_get_handle(NULL, "\\_SB", &handle)))
return;
if (ACPI_FAILURE(acpi_run_osc(handle, &context)))
return;
capbuf_ret = context.ret.pointer;
if (context.ret.length <= OSC_SUPPORT_DWORD) {
kfree(context.ret.pointer);
return;
}
/*
* Now run _OSC again with query flag clear and with the caps
* supported by both the OS and the platform.
*/
capbuf[OSC_QUERY_DWORD] = 0;
capbuf[OSC_SUPPORT_DWORD] = capbuf_ret[OSC_SUPPORT_DWORD];
kfree(context.ret.pointer);
if (ACPI_FAILURE(acpi_run_osc(handle, &context)))
return;
capbuf_ret = context.ret.pointer;
if (context.ret.length > OSC_SUPPORT_DWORD) {
ACPI: CPPC: Only probe for _CPC if CPPC v2 is acked Previously the kernel used to ignore whether the firmware masked CPPC or CPPCv2 and would just pretend that it worked. When support for the USB4 bit in _OSC was introduced from commit 9e1f561afb ("ACPI: Execute platform _OSC also with query bit clear") the kernel began to look at the return when the query bit was clear. This caused regressions that were misdiagnosed and attempted to be solved as part of commit 2ca8e6285250 ("Revert "ACPI: Pass the same capabilities to the _OSC regardless of the query flag""). This caused a different regression where non-Intel systems weren't able to negotiate _OSC properly. This was reverted in commit 2ca8e6285250 ("Revert "ACPI: Pass the same capabilities to the _OSC regardless of the query flag"") and attempted to be fixed by commit c42fa24b4475 ("ACPI: bus: Avoid using CPPC if not supported by firmware") but the regression still returned. These systems with the regression only load support for CPPC from an SSDT dynamically when _OSC reports CPPC v2. Avoid the problem by not letting CPPC satisfy the requirement in `acpi_cppc_processor_probe`. Reported-by: CUI Hao <cuihao.leo@gmail.com> Reported-by: maxim.novozhilov@gmail.com Reported-by: lethe.tree@protonmail.com Reported-by: garystephenwright@gmail.com Reported-by: galaxyking0419@gmail.com Fixes: c42fa24b4475 ("ACPI: bus: Avoid using CPPC if not supported by firmware") Fixes: 2ca8e6285250 ("Revert "ACPI Pass the same capabilities to the _OSC regardless of the query flag"") Link: https://bugzilla.kernel.org/show_bug.cgi?id=213023 Link: https://bugzilla.redhat.com/show_bug.cgi?id=2075387 Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: CUI Hao <cuihao.leo@gmail.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-05 18:29:14 +00:00
#ifdef CONFIG_ACPI_CPPC_LIB
osc_sb_cppc2_support_acked = capbuf_ret[OSC_SUPPORT_DWORD] & OSC_SB_CPCV2_SUPPORT;
#endif
osc_sb_apei_support_acked =
capbuf_ret[OSC_SUPPORT_DWORD] & OSC_SB_APEI_SUPPORT;
osc_pc_lpi_support_confirmed =
capbuf_ret[OSC_SUPPORT_DWORD] & OSC_SB_PCLPI_SUPPORT;
osc_sb_native_usb4_support_confirmed =
capbuf_ret[OSC_SUPPORT_DWORD] & OSC_SB_NATIVE_USB4_SUPPORT;
osc_cpc_flexible_adr_space_confirmed =
capbuf_ret[OSC_SUPPORT_DWORD] & OSC_SB_CPC_FLEXIBLE_ADR_SPACE;
}
kfree(context.ret.pointer);
}
/*
* Native control of USB4 capabilities. If any of the tunneling bits is
* set it means OS is in control and we use software based connection
* manager.
*/
u32 osc_sb_native_usb4_control;
EXPORT_SYMBOL_GPL(osc_sb_native_usb4_control);
static void acpi_bus_decode_usb_osc(const char *msg, u32 bits)
{
pr_info("%s USB3%c DisplayPort%c PCIe%c XDomain%c\n", msg,
(bits & OSC_USB_USB3_TUNNELING) ? '+' : '-',
(bits & OSC_USB_DP_TUNNELING) ? '+' : '-',
(bits & OSC_USB_PCIE_TUNNELING) ? '+' : '-',
(bits & OSC_USB_XDOMAIN) ? '+' : '-');
}
static u8 sb_usb_uuid_str[] = "23A0D13A-26AB-486C-9C5F-0FFA525A575A";
static void acpi_bus_osc_negotiate_usb_control(void)
{
u32 capbuf[3], *capbuf_ret;
struct acpi_osc_context context = {
.uuid_str = sb_usb_uuid_str,
.rev = 1,
.cap.length = sizeof(capbuf),
.cap.pointer = capbuf,
};
acpi_handle handle;
acpi_status status;
u32 control;
if (!osc_sb_native_usb4_support_confirmed)
return;
if (ACPI_FAILURE(acpi_get_handle(NULL, "\\_SB", &handle)))
return;
control = OSC_USB_USB3_TUNNELING | OSC_USB_DP_TUNNELING |
OSC_USB_PCIE_TUNNELING | OSC_USB_XDOMAIN;
/*
* Run _OSC first with query bit set, trying to get control over
* all tunneling. The platform can then clear out bits in the
* control dword that it does not want to grant to the OS.
*/
capbuf[OSC_QUERY_DWORD] = OSC_QUERY_ENABLE;
capbuf[OSC_SUPPORT_DWORD] = 0;
capbuf[OSC_CONTROL_DWORD] = control;
status = acpi_run_osc(handle, &context);
if (ACPI_FAILURE(status))
return;
if (context.ret.length != sizeof(capbuf)) {
pr_info("USB4 _OSC: returned invalid length buffer\n");
goto out_free;
}
/*
* Run _OSC again now with query bit clear and the control dword
* matching what the platform granted (which may not have all
* the control bits set).
*/
capbuf_ret = context.ret.pointer;
capbuf[OSC_QUERY_DWORD] = 0;
capbuf[OSC_CONTROL_DWORD] = capbuf_ret[OSC_CONTROL_DWORD];
kfree(context.ret.pointer);
status = acpi_run_osc(handle, &context);
if (ACPI_FAILURE(status))
return;
if (context.ret.length != sizeof(capbuf)) {
pr_info("USB4 _OSC: returned invalid length buffer\n");
goto out_free;
}
osc_sb_native_usb4_control =
control & acpi_osc_ctx_get_pci_control(&context);
acpi_bus_decode_usb_osc("USB4 _OSC: OS supports", control);
acpi_bus_decode_usb_osc("USB4 _OSC: OS controls",
osc_sb_native_usb4_control);
out_free:
kfree(context.ret.pointer);
}
/* --------------------------------------------------------------------------
Notification Handling
-------------------------------------------------------------------------- */
ACPI: bus: Rework system-level device notification handling For ACPI drivers that provide a ->notify() callback and set ACPI_DRIVER_ALL_NOTIFY_EVENTS in their flags, that callback can be invoked while either the ->add() or the ->remove() callback is running without any synchronization at the bus type level which is counter to the common-sense expectation that notification handling should only be enabled when the driver is actually bound to the device. As a result, if the driver is not careful enough, it's ->notify() callback may crash when it is invoked too early or too late [1]. This issue has been amplified by commit d6fb6ee1820c ("ACPI: bus: Drop driver member of struct acpi_device") that made acpi_bus_notify() check for the presence of the driver and its ->notify() callback directly instead of using an extra driver pointer that was only set and cleared by the bus type code, but it was present before that commit although it was harder to reproduce then. It can be addressed by using the observation that acpi_device_install_notify_handler() can be modified to install the handler for all types of events when ACPI_DRIVER_ALL_NOTIFY_EVENTS is set in the driver flags, in which case acpi_bus_notify() will not need to invoke the driver's ->notify() callback any more and that callback will only be invoked after acpi_device_install_notify_handler() has run and before acpi_device_remove_notify_handler() runs, which implies the correct ordering with respect to the other ACPI driver callbacks. Modify the code accordingly and while at it, drop two redundant local variables from acpi_bus_notify() and turn its description comment into a proper kerneldoc one. Fixes: d6fb6ee1820c ("ACPI: bus: Drop driver member of struct acpi_device") Link: https://lore.kernel.org/linux-acpi/9f6cba7a8a57e5a687c934e8e406e28c.squirrel@mail.panix.com # [1] Reported-by: Pierre Asselin <pa@panix.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Pierre Asselin <pa@panix.com>
2023-03-24 13:33:42 +00:00
/**
* acpi_bus_notify - Global system-level (0x00-0x7F) notifications handler
* @handle: Target ACPI object.
* @type: Notification type.
* @data: Ignored.
*
* This only handles notifications related to device hotplug.
*/
static void acpi_bus_notify(acpi_handle handle, u32 type, void *data)
{
struct acpi_device *adev;
switch (type) {
case ACPI_NOTIFY_BUS_CHECK:
acpi_handle_debug(handle, "ACPI_NOTIFY_BUS_CHECK event\n");
break;
case ACPI_NOTIFY_DEVICE_CHECK:
acpi_handle_debug(handle, "ACPI_NOTIFY_DEVICE_CHECK event\n");
break;
case ACPI_NOTIFY_DEVICE_WAKE:
acpi_handle_debug(handle, "ACPI_NOTIFY_DEVICE_WAKE event\n");
ACPI: bus: Rework system-level device notification handling For ACPI drivers that provide a ->notify() callback and set ACPI_DRIVER_ALL_NOTIFY_EVENTS in their flags, that callback can be invoked while either the ->add() or the ->remove() callback is running without any synchronization at the bus type level which is counter to the common-sense expectation that notification handling should only be enabled when the driver is actually bound to the device. As a result, if the driver is not careful enough, it's ->notify() callback may crash when it is invoked too early or too late [1]. This issue has been amplified by commit d6fb6ee1820c ("ACPI: bus: Drop driver member of struct acpi_device") that made acpi_bus_notify() check for the presence of the driver and its ->notify() callback directly instead of using an extra driver pointer that was only set and cleared by the bus type code, but it was present before that commit although it was harder to reproduce then. It can be addressed by using the observation that acpi_device_install_notify_handler() can be modified to install the handler for all types of events when ACPI_DRIVER_ALL_NOTIFY_EVENTS is set in the driver flags, in which case acpi_bus_notify() will not need to invoke the driver's ->notify() callback any more and that callback will only be invoked after acpi_device_install_notify_handler() has run and before acpi_device_remove_notify_handler() runs, which implies the correct ordering with respect to the other ACPI driver callbacks. Modify the code accordingly and while at it, drop two redundant local variables from acpi_bus_notify() and turn its description comment into a proper kerneldoc one. Fixes: d6fb6ee1820c ("ACPI: bus: Drop driver member of struct acpi_device") Link: https://lore.kernel.org/linux-acpi/9f6cba7a8a57e5a687c934e8e406e28c.squirrel@mail.panix.com # [1] Reported-by: Pierre Asselin <pa@panix.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Pierre Asselin <pa@panix.com>
2023-03-24 13:33:42 +00:00
return;
case ACPI_NOTIFY_EJECT_REQUEST:
acpi_handle_debug(handle, "ACPI_NOTIFY_EJECT_REQUEST event\n");
break;
case ACPI_NOTIFY_DEVICE_CHECK_LIGHT:
acpi_handle_debug(handle, "ACPI_NOTIFY_DEVICE_CHECK_LIGHT event\n");
/* TBD: Exactly what does 'light' mean? */
ACPI: bus: Rework system-level device notification handling For ACPI drivers that provide a ->notify() callback and set ACPI_DRIVER_ALL_NOTIFY_EVENTS in their flags, that callback can be invoked while either the ->add() or the ->remove() callback is running without any synchronization at the bus type level which is counter to the common-sense expectation that notification handling should only be enabled when the driver is actually bound to the device. As a result, if the driver is not careful enough, it's ->notify() callback may crash when it is invoked too early or too late [1]. This issue has been amplified by commit d6fb6ee1820c ("ACPI: bus: Drop driver member of struct acpi_device") that made acpi_bus_notify() check for the presence of the driver and its ->notify() callback directly instead of using an extra driver pointer that was only set and cleared by the bus type code, but it was present before that commit although it was harder to reproduce then. It can be addressed by using the observation that acpi_device_install_notify_handler() can be modified to install the handler for all types of events when ACPI_DRIVER_ALL_NOTIFY_EVENTS is set in the driver flags, in which case acpi_bus_notify() will not need to invoke the driver's ->notify() callback any more and that callback will only be invoked after acpi_device_install_notify_handler() has run and before acpi_device_remove_notify_handler() runs, which implies the correct ordering with respect to the other ACPI driver callbacks. Modify the code accordingly and while at it, drop two redundant local variables from acpi_bus_notify() and turn its description comment into a proper kerneldoc one. Fixes: d6fb6ee1820c ("ACPI: bus: Drop driver member of struct acpi_device") Link: https://lore.kernel.org/linux-acpi/9f6cba7a8a57e5a687c934e8e406e28c.squirrel@mail.panix.com # [1] Reported-by: Pierre Asselin <pa@panix.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Pierre Asselin <pa@panix.com>
2023-03-24 13:33:42 +00:00
return;
case ACPI_NOTIFY_FREQUENCY_MISMATCH:
acpi_handle_err(handle, "Device cannot be configured due "
"to a frequency mismatch\n");
ACPI: bus: Rework system-level device notification handling For ACPI drivers that provide a ->notify() callback and set ACPI_DRIVER_ALL_NOTIFY_EVENTS in their flags, that callback can be invoked while either the ->add() or the ->remove() callback is running without any synchronization at the bus type level which is counter to the common-sense expectation that notification handling should only be enabled when the driver is actually bound to the device. As a result, if the driver is not careful enough, it's ->notify() callback may crash when it is invoked too early or too late [1]. This issue has been amplified by commit d6fb6ee1820c ("ACPI: bus: Drop driver member of struct acpi_device") that made acpi_bus_notify() check for the presence of the driver and its ->notify() callback directly instead of using an extra driver pointer that was only set and cleared by the bus type code, but it was present before that commit although it was harder to reproduce then. It can be addressed by using the observation that acpi_device_install_notify_handler() can be modified to install the handler for all types of events when ACPI_DRIVER_ALL_NOTIFY_EVENTS is set in the driver flags, in which case acpi_bus_notify() will not need to invoke the driver's ->notify() callback any more and that callback will only be invoked after acpi_device_install_notify_handler() has run and before acpi_device_remove_notify_handler() runs, which implies the correct ordering with respect to the other ACPI driver callbacks. Modify the code accordingly and while at it, drop two redundant local variables from acpi_bus_notify() and turn its description comment into a proper kerneldoc one. Fixes: d6fb6ee1820c ("ACPI: bus: Drop driver member of struct acpi_device") Link: https://lore.kernel.org/linux-acpi/9f6cba7a8a57e5a687c934e8e406e28c.squirrel@mail.panix.com # [1] Reported-by: Pierre Asselin <pa@panix.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Pierre Asselin <pa@panix.com>
2023-03-24 13:33:42 +00:00
return;
case ACPI_NOTIFY_BUS_MODE_MISMATCH:
acpi_handle_err(handle, "Device cannot be configured due "
"to a bus mode mismatch\n");
ACPI: bus: Rework system-level device notification handling For ACPI drivers that provide a ->notify() callback and set ACPI_DRIVER_ALL_NOTIFY_EVENTS in their flags, that callback can be invoked while either the ->add() or the ->remove() callback is running without any synchronization at the bus type level which is counter to the common-sense expectation that notification handling should only be enabled when the driver is actually bound to the device. As a result, if the driver is not careful enough, it's ->notify() callback may crash when it is invoked too early or too late [1]. This issue has been amplified by commit d6fb6ee1820c ("ACPI: bus: Drop driver member of struct acpi_device") that made acpi_bus_notify() check for the presence of the driver and its ->notify() callback directly instead of using an extra driver pointer that was only set and cleared by the bus type code, but it was present before that commit although it was harder to reproduce then. It can be addressed by using the observation that acpi_device_install_notify_handler() can be modified to install the handler for all types of events when ACPI_DRIVER_ALL_NOTIFY_EVENTS is set in the driver flags, in which case acpi_bus_notify() will not need to invoke the driver's ->notify() callback any more and that callback will only be invoked after acpi_device_install_notify_handler() has run and before acpi_device_remove_notify_handler() runs, which implies the correct ordering with respect to the other ACPI driver callbacks. Modify the code accordingly and while at it, drop two redundant local variables from acpi_bus_notify() and turn its description comment into a proper kerneldoc one. Fixes: d6fb6ee1820c ("ACPI: bus: Drop driver member of struct acpi_device") Link: https://lore.kernel.org/linux-acpi/9f6cba7a8a57e5a687c934e8e406e28c.squirrel@mail.panix.com # [1] Reported-by: Pierre Asselin <pa@panix.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Pierre Asselin <pa@panix.com>
2023-03-24 13:33:42 +00:00
return;
case ACPI_NOTIFY_POWER_FAULT:
acpi_handle_err(handle, "Device has suffered a power fault\n");
ACPI: bus: Rework system-level device notification handling For ACPI drivers that provide a ->notify() callback and set ACPI_DRIVER_ALL_NOTIFY_EVENTS in their flags, that callback can be invoked while either the ->add() or the ->remove() callback is running without any synchronization at the bus type level which is counter to the common-sense expectation that notification handling should only be enabled when the driver is actually bound to the device. As a result, if the driver is not careful enough, it's ->notify() callback may crash when it is invoked too early or too late [1]. This issue has been amplified by commit d6fb6ee1820c ("ACPI: bus: Drop driver member of struct acpi_device") that made acpi_bus_notify() check for the presence of the driver and its ->notify() callback directly instead of using an extra driver pointer that was only set and cleared by the bus type code, but it was present before that commit although it was harder to reproduce then. It can be addressed by using the observation that acpi_device_install_notify_handler() can be modified to install the handler for all types of events when ACPI_DRIVER_ALL_NOTIFY_EVENTS is set in the driver flags, in which case acpi_bus_notify() will not need to invoke the driver's ->notify() callback any more and that callback will only be invoked after acpi_device_install_notify_handler() has run and before acpi_device_remove_notify_handler() runs, which implies the correct ordering with respect to the other ACPI driver callbacks. Modify the code accordingly and while at it, drop two redundant local variables from acpi_bus_notify() and turn its description comment into a proper kerneldoc one. Fixes: d6fb6ee1820c ("ACPI: bus: Drop driver member of struct acpi_device") Link: https://lore.kernel.org/linux-acpi/9f6cba7a8a57e5a687c934e8e406e28c.squirrel@mail.panix.com # [1] Reported-by: Pierre Asselin <pa@panix.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Pierre Asselin <pa@panix.com>
2023-03-24 13:33:42 +00:00
return;
default:
acpi_handle_debug(handle, "Unknown event type 0x%x\n", type);
ACPI: bus: Rework system-level device notification handling For ACPI drivers that provide a ->notify() callback and set ACPI_DRIVER_ALL_NOTIFY_EVENTS in their flags, that callback can be invoked while either the ->add() or the ->remove() callback is running without any synchronization at the bus type level which is counter to the common-sense expectation that notification handling should only be enabled when the driver is actually bound to the device. As a result, if the driver is not careful enough, it's ->notify() callback may crash when it is invoked too early or too late [1]. This issue has been amplified by commit d6fb6ee1820c ("ACPI: bus: Drop driver member of struct acpi_device") that made acpi_bus_notify() check for the presence of the driver and its ->notify() callback directly instead of using an extra driver pointer that was only set and cleared by the bus type code, but it was present before that commit although it was harder to reproduce then. It can be addressed by using the observation that acpi_device_install_notify_handler() can be modified to install the handler for all types of events when ACPI_DRIVER_ALL_NOTIFY_EVENTS is set in the driver flags, in which case acpi_bus_notify() will not need to invoke the driver's ->notify() callback any more and that callback will only be invoked after acpi_device_install_notify_handler() has run and before acpi_device_remove_notify_handler() runs, which implies the correct ordering with respect to the other ACPI driver callbacks. Modify the code accordingly and while at it, drop two redundant local variables from acpi_bus_notify() and turn its description comment into a proper kerneldoc one. Fixes: d6fb6ee1820c ("ACPI: bus: Drop driver member of struct acpi_device") Link: https://lore.kernel.org/linux-acpi/9f6cba7a8a57e5a687c934e8e406e28c.squirrel@mail.panix.com # [1] Reported-by: Pierre Asselin <pa@panix.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Pierre Asselin <pa@panix.com>
2023-03-24 13:33:42 +00:00
return;
}
adev = acpi_get_acpi_dev(handle);
ACPI: bus: Rework system-level device notification handling For ACPI drivers that provide a ->notify() callback and set ACPI_DRIVER_ALL_NOTIFY_EVENTS in their flags, that callback can be invoked while either the ->add() or the ->remove() callback is running without any synchronization at the bus type level which is counter to the common-sense expectation that notification handling should only be enabled when the driver is actually bound to the device. As a result, if the driver is not careful enough, it's ->notify() callback may crash when it is invoked too early or too late [1]. This issue has been amplified by commit d6fb6ee1820c ("ACPI: bus: Drop driver member of struct acpi_device") that made acpi_bus_notify() check for the presence of the driver and its ->notify() callback directly instead of using an extra driver pointer that was only set and cleared by the bus type code, but it was present before that commit although it was harder to reproduce then. It can be addressed by using the observation that acpi_device_install_notify_handler() can be modified to install the handler for all types of events when ACPI_DRIVER_ALL_NOTIFY_EVENTS is set in the driver flags, in which case acpi_bus_notify() will not need to invoke the driver's ->notify() callback any more and that callback will only be invoked after acpi_device_install_notify_handler() has run and before acpi_device_remove_notify_handler() runs, which implies the correct ordering with respect to the other ACPI driver callbacks. Modify the code accordingly and while at it, drop two redundant local variables from acpi_bus_notify() and turn its description comment into a proper kerneldoc one. Fixes: d6fb6ee1820c ("ACPI: bus: Drop driver member of struct acpi_device") Link: https://lore.kernel.org/linux-acpi/9f6cba7a8a57e5a687c934e8e406e28c.squirrel@mail.panix.com # [1] Reported-by: Pierre Asselin <pa@panix.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Pierre Asselin <pa@panix.com>
2023-03-24 13:33:42 +00:00
if (adev && ACPI_SUCCESS(acpi_hotplug_schedule(adev, type)))
return;
acpi_put_acpi_dev(adev);
ACPI: bus: Rework system-level device notification handling For ACPI drivers that provide a ->notify() callback and set ACPI_DRIVER_ALL_NOTIFY_EVENTS in their flags, that callback can be invoked while either the ->add() or the ->remove() callback is running without any synchronization at the bus type level which is counter to the common-sense expectation that notification handling should only be enabled when the driver is actually bound to the device. As a result, if the driver is not careful enough, it's ->notify() callback may crash when it is invoked too early or too late [1]. This issue has been amplified by commit d6fb6ee1820c ("ACPI: bus: Drop driver member of struct acpi_device") that made acpi_bus_notify() check for the presence of the driver and its ->notify() callback directly instead of using an extra driver pointer that was only set and cleared by the bus type code, but it was present before that commit although it was harder to reproduce then. It can be addressed by using the observation that acpi_device_install_notify_handler() can be modified to install the handler for all types of events when ACPI_DRIVER_ALL_NOTIFY_EVENTS is set in the driver flags, in which case acpi_bus_notify() will not need to invoke the driver's ->notify() callback any more and that callback will only be invoked after acpi_device_install_notify_handler() has run and before acpi_device_remove_notify_handler() runs, which implies the correct ordering with respect to the other ACPI driver callbacks. Modify the code accordingly and while at it, drop two redundant local variables from acpi_bus_notify() and turn its description comment into a proper kerneldoc one. Fixes: d6fb6ee1820c ("ACPI: bus: Drop driver member of struct acpi_device") Link: https://lore.kernel.org/linux-acpi/9f6cba7a8a57e5a687c934e8e406e28c.squirrel@mail.panix.com # [1] Reported-by: Pierre Asselin <pa@panix.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Pierre Asselin <pa@panix.com>
2023-03-24 13:33:42 +00:00
acpi_evaluate_ost(handle, type, ACPI_OST_SC_NON_SPECIFIC_FAILURE, NULL);
}
static void acpi_notify_device(acpi_handle handle, u32 event, void *data)
{
struct acpi_device *device = data;
struct acpi_driver *acpi_drv = to_acpi_driver(device->dev.driver);
acpi_drv->ops.notify(device, event);
}
ACPI: bus: Rework system-level device notification handling For ACPI drivers that provide a ->notify() callback and set ACPI_DRIVER_ALL_NOTIFY_EVENTS in their flags, that callback can be invoked while either the ->add() or the ->remove() callback is running without any synchronization at the bus type level which is counter to the common-sense expectation that notification handling should only be enabled when the driver is actually bound to the device. As a result, if the driver is not careful enough, it's ->notify() callback may crash when it is invoked too early or too late [1]. This issue has been amplified by commit d6fb6ee1820c ("ACPI: bus: Drop driver member of struct acpi_device") that made acpi_bus_notify() check for the presence of the driver and its ->notify() callback directly instead of using an extra driver pointer that was only set and cleared by the bus type code, but it was present before that commit although it was harder to reproduce then. It can be addressed by using the observation that acpi_device_install_notify_handler() can be modified to install the handler for all types of events when ACPI_DRIVER_ALL_NOTIFY_EVENTS is set in the driver flags, in which case acpi_bus_notify() will not need to invoke the driver's ->notify() callback any more and that callback will only be invoked after acpi_device_install_notify_handler() has run and before acpi_device_remove_notify_handler() runs, which implies the correct ordering with respect to the other ACPI driver callbacks. Modify the code accordingly and while at it, drop two redundant local variables from acpi_bus_notify() and turn its description comment into a proper kerneldoc one. Fixes: d6fb6ee1820c ("ACPI: bus: Drop driver member of struct acpi_device") Link: https://lore.kernel.org/linux-acpi/9f6cba7a8a57e5a687c934e8e406e28c.squirrel@mail.panix.com # [1] Reported-by: Pierre Asselin <pa@panix.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Pierre Asselin <pa@panix.com>
2023-03-24 13:33:42 +00:00
static int acpi_device_install_notify_handler(struct acpi_device *device,
struct acpi_driver *acpi_drv)
{
u32 type = acpi_drv->flags & ACPI_DRIVER_ALL_NOTIFY_EVENTS ?
ACPI: bus: Rework system-level device notification handling For ACPI drivers that provide a ->notify() callback and set ACPI_DRIVER_ALL_NOTIFY_EVENTS in their flags, that callback can be invoked while either the ->add() or the ->remove() callback is running without any synchronization at the bus type level which is counter to the common-sense expectation that notification handling should only be enabled when the driver is actually bound to the device. As a result, if the driver is not careful enough, it's ->notify() callback may crash when it is invoked too early or too late [1]. This issue has been amplified by commit d6fb6ee1820c ("ACPI: bus: Drop driver member of struct acpi_device") that made acpi_bus_notify() check for the presence of the driver and its ->notify() callback directly instead of using an extra driver pointer that was only set and cleared by the bus type code, but it was present before that commit although it was harder to reproduce then. It can be addressed by using the observation that acpi_device_install_notify_handler() can be modified to install the handler for all types of events when ACPI_DRIVER_ALL_NOTIFY_EVENTS is set in the driver flags, in which case acpi_bus_notify() will not need to invoke the driver's ->notify() callback any more and that callback will only be invoked after acpi_device_install_notify_handler() has run and before acpi_device_remove_notify_handler() runs, which implies the correct ordering with respect to the other ACPI driver callbacks. Modify the code accordingly and while at it, drop two redundant local variables from acpi_bus_notify() and turn its description comment into a proper kerneldoc one. Fixes: d6fb6ee1820c ("ACPI: bus: Drop driver member of struct acpi_device") Link: https://lore.kernel.org/linux-acpi/9f6cba7a8a57e5a687c934e8e406e28c.squirrel@mail.panix.com # [1] Reported-by: Pierre Asselin <pa@panix.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Pierre Asselin <pa@panix.com>
2023-03-24 13:33:42 +00:00
ACPI_ALL_NOTIFY : ACPI_DEVICE_NOTIFY;
acpi_status status;
ACPI: bus: Rework system-level device notification handling For ACPI drivers that provide a ->notify() callback and set ACPI_DRIVER_ALL_NOTIFY_EVENTS in their flags, that callback can be invoked while either the ->add() or the ->remove() callback is running without any synchronization at the bus type level which is counter to the common-sense expectation that notification handling should only be enabled when the driver is actually bound to the device. As a result, if the driver is not careful enough, it's ->notify() callback may crash when it is invoked too early or too late [1]. This issue has been amplified by commit d6fb6ee1820c ("ACPI: bus: Drop driver member of struct acpi_device") that made acpi_bus_notify() check for the presence of the driver and its ->notify() callback directly instead of using an extra driver pointer that was only set and cleared by the bus type code, but it was present before that commit although it was harder to reproduce then. It can be addressed by using the observation that acpi_device_install_notify_handler() can be modified to install the handler for all types of events when ACPI_DRIVER_ALL_NOTIFY_EVENTS is set in the driver flags, in which case acpi_bus_notify() will not need to invoke the driver's ->notify() callback any more and that callback will only be invoked after acpi_device_install_notify_handler() has run and before acpi_device_remove_notify_handler() runs, which implies the correct ordering with respect to the other ACPI driver callbacks. Modify the code accordingly and while at it, drop two redundant local variables from acpi_bus_notify() and turn its description comment into a proper kerneldoc one. Fixes: d6fb6ee1820c ("ACPI: bus: Drop driver member of struct acpi_device") Link: https://lore.kernel.org/linux-acpi/9f6cba7a8a57e5a687c934e8e406e28c.squirrel@mail.panix.com # [1] Reported-by: Pierre Asselin <pa@panix.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Pierre Asselin <pa@panix.com>
2023-03-24 13:33:42 +00:00
status = acpi_install_notify_handler(device->handle, type,
acpi_notify_device, device);
if (ACPI_FAILURE(status))
return -EINVAL;
return 0;
}
ACPI: bus: Rework system-level device notification handling For ACPI drivers that provide a ->notify() callback and set ACPI_DRIVER_ALL_NOTIFY_EVENTS in their flags, that callback can be invoked while either the ->add() or the ->remove() callback is running without any synchronization at the bus type level which is counter to the common-sense expectation that notification handling should only be enabled when the driver is actually bound to the device. As a result, if the driver is not careful enough, it's ->notify() callback may crash when it is invoked too early or too late [1]. This issue has been amplified by commit d6fb6ee1820c ("ACPI: bus: Drop driver member of struct acpi_device") that made acpi_bus_notify() check for the presence of the driver and its ->notify() callback directly instead of using an extra driver pointer that was only set and cleared by the bus type code, but it was present before that commit although it was harder to reproduce then. It can be addressed by using the observation that acpi_device_install_notify_handler() can be modified to install the handler for all types of events when ACPI_DRIVER_ALL_NOTIFY_EVENTS is set in the driver flags, in which case acpi_bus_notify() will not need to invoke the driver's ->notify() callback any more and that callback will only be invoked after acpi_device_install_notify_handler() has run and before acpi_device_remove_notify_handler() runs, which implies the correct ordering with respect to the other ACPI driver callbacks. Modify the code accordingly and while at it, drop two redundant local variables from acpi_bus_notify() and turn its description comment into a proper kerneldoc one. Fixes: d6fb6ee1820c ("ACPI: bus: Drop driver member of struct acpi_device") Link: https://lore.kernel.org/linux-acpi/9f6cba7a8a57e5a687c934e8e406e28c.squirrel@mail.panix.com # [1] Reported-by: Pierre Asselin <pa@panix.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Pierre Asselin <pa@panix.com>
2023-03-24 13:33:42 +00:00
static void acpi_device_remove_notify_handler(struct acpi_device *device,
struct acpi_driver *acpi_drv)
{
u32 type = acpi_drv->flags & ACPI_DRIVER_ALL_NOTIFY_EVENTS ?
ACPI: bus: Rework system-level device notification handling For ACPI drivers that provide a ->notify() callback and set ACPI_DRIVER_ALL_NOTIFY_EVENTS in their flags, that callback can be invoked while either the ->add() or the ->remove() callback is running without any synchronization at the bus type level which is counter to the common-sense expectation that notification handling should only be enabled when the driver is actually bound to the device. As a result, if the driver is not careful enough, it's ->notify() callback may crash when it is invoked too early or too late [1]. This issue has been amplified by commit d6fb6ee1820c ("ACPI: bus: Drop driver member of struct acpi_device") that made acpi_bus_notify() check for the presence of the driver and its ->notify() callback directly instead of using an extra driver pointer that was only set and cleared by the bus type code, but it was present before that commit although it was harder to reproduce then. It can be addressed by using the observation that acpi_device_install_notify_handler() can be modified to install the handler for all types of events when ACPI_DRIVER_ALL_NOTIFY_EVENTS is set in the driver flags, in which case acpi_bus_notify() will not need to invoke the driver's ->notify() callback any more and that callback will only be invoked after acpi_device_install_notify_handler() has run and before acpi_device_remove_notify_handler() runs, which implies the correct ordering with respect to the other ACPI driver callbacks. Modify the code accordingly and while at it, drop two redundant local variables from acpi_bus_notify() and turn its description comment into a proper kerneldoc one. Fixes: d6fb6ee1820c ("ACPI: bus: Drop driver member of struct acpi_device") Link: https://lore.kernel.org/linux-acpi/9f6cba7a8a57e5a687c934e8e406e28c.squirrel@mail.panix.com # [1] Reported-by: Pierre Asselin <pa@panix.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Pierre Asselin <pa@panix.com>
2023-03-24 13:33:42 +00:00
ACPI_ALL_NOTIFY : ACPI_DEVICE_NOTIFY;
acpi_remove_notify_handler(device->handle, type,
acpi_notify_device);
acpi_os_wait_events_complete();
}
int acpi_dev_install_notify_handler(struct acpi_device *adev,
u32 handler_type,
acpi_notify_handler handler, void *context)
{
acpi_status status;
status = acpi_install_notify_handler(adev->handle, handler_type,
handler, context);
if (ACPI_FAILURE(status))
return -ENODEV;
return 0;
}
EXPORT_SYMBOL_GPL(acpi_dev_install_notify_handler);
void acpi_dev_remove_notify_handler(struct acpi_device *adev,
u32 handler_type,
acpi_notify_handler handler)
{
acpi_remove_notify_handler(adev->handle, handler_type, handler);
acpi_os_wait_events_complete();
}
EXPORT_SYMBOL_GPL(acpi_dev_remove_notify_handler);
/* Handle events targeting \_SB device (at present only graceful shutdown) */
#define ACPI_SB_NOTIFY_SHUTDOWN_REQUEST 0x81
#define ACPI_SB_INDICATE_INTERVAL 10000
static void sb_notify_work(struct work_struct *dummy)
{
acpi_handle sb_handle;
orderly_poweroff(true);
/*
* After initiating graceful shutdown, the ACPI spec requires OSPM
* to evaluate _OST method once every 10seconds to indicate that
* the shutdown is in progress
*/
acpi_get_handle(NULL, "\\_SB", &sb_handle);
while (1) {
pr_info("Graceful shutdown in progress.\n");
acpi_evaluate_ost(sb_handle, ACPI_OST_EC_OSPM_SHUTDOWN,
ACPI_OST_SC_OS_SHUTDOWN_IN_PROGRESS, NULL);
msleep(ACPI_SB_INDICATE_INTERVAL);
}
}
static void acpi_sb_notify(acpi_handle handle, u32 event, void *data)
{
static DECLARE_WORK(acpi_sb_work, sb_notify_work);
if (event == ACPI_SB_NOTIFY_SHUTDOWN_REQUEST) {
if (!work_busy(&acpi_sb_work))
schedule_work(&acpi_sb_work);
} else {
pr_warn("event %x is not supported by \\_SB device\n", event);
}
}
static int __init acpi_setup_sb_notify_handler(void)
{
acpi_handle sb_handle;
if (ACPI_FAILURE(acpi_get_handle(NULL, "\\_SB", &sb_handle)))
return -ENXIO;
if (ACPI_FAILURE(acpi_install_notify_handler(sb_handle, ACPI_DEVICE_NOTIFY,
acpi_sb_notify, NULL)))
return -EINVAL;
return 0;
}
/* --------------------------------------------------------------------------
Device Matching
-------------------------------------------------------------------------- */
/**
* acpi_get_first_physical_node - Get first physical node of an ACPI device
* @adev: ACPI device in question
*
* Return: First physical node of ACPI device @adev
*/
struct device *acpi_get_first_physical_node(struct acpi_device *adev)
{
struct mutex *physical_node_lock = &adev->physical_node_lock;
struct device *phys_dev;
mutex_lock(physical_node_lock);
if (list_empty(&adev->physical_node_list)) {
phys_dev = NULL;
} else {
const struct acpi_device_physical_node *node;
node = list_first_entry(&adev->physical_node_list,
struct acpi_device_physical_node, node);
phys_dev = node->dev;
}
mutex_unlock(physical_node_lock);
return phys_dev;
}
EXPORT_SYMBOL_GPL(acpi_get_first_physical_node);
static struct acpi_device *acpi_primary_dev_companion(struct acpi_device *adev,
const struct device *dev)
{
const struct device *phys_dev = acpi_get_first_physical_node(adev);
return phys_dev && phys_dev == dev ? adev : NULL;
}
/**
* acpi_device_is_first_physical_node - Is given dev first physical node
* @adev: ACPI companion device
* @dev: Physical device to check
*
* Function checks if given @dev is the first physical devices attached to
* the ACPI companion device. This distinction is needed in some cases
* where the same companion device is shared between many physical devices.
*
* Note that the caller have to provide valid @adev pointer.
*/
bool acpi_device_is_first_physical_node(struct acpi_device *adev,
const struct device *dev)
{
return !!acpi_primary_dev_companion(adev, dev);
}
/*
* acpi_companion_match() - Can we match via ACPI companion device
* @dev: Device in question
*
* Check if the given device has an ACPI companion and if that companion has
* a valid list of PNP IDs, and if the device is the first (primary) physical
* device associated with it. Return the companion pointer if that's the case
* or NULL otherwise.
*
* If multiple physical devices are attached to a single ACPI companion, we need
* to be careful. The usage scenario for this kind of relationship is that all
* of the physical devices in question use resources provided by the ACPI
* companion. A typical case is an MFD device where all the sub-devices share
* the parent's ACPI companion. In such cases we can only allow the primary
* (first) physical device to be matched with the help of the companion's PNP
* IDs.
*
* Additional physical devices sharing the ACPI companion can still use
* resources available from it but they will be matched normally using functions
* provided by their bus types (and analogously for their modalias).
*/
const struct acpi_device *acpi_companion_match(const struct device *dev)
{
struct acpi_device *adev;
adev = ACPI_COMPANION(dev);
if (!adev)
return NULL;
if (list_empty(&adev->pnp.ids))
return NULL;
return acpi_primary_dev_companion(adev, dev);
}
/**
* acpi_of_match_device - Match device object using the "compatible" property.
* @adev: ACPI device object to match.
* @of_match_table: List of device IDs to match against.
* @of_id: OF ID if matched
*
* If @dev has an ACPI companion which has ACPI_DT_NAMESPACE_HID in its list of
* identifiers and a _DSD object with the "compatible" property, use that
* property to match against the given list of identifiers.
*/
static bool acpi_of_match_device(const struct acpi_device *adev,
const struct of_device_id *of_match_table,
const struct of_device_id **of_id)
{
const union acpi_object *of_compatible, *obj;
int i, nval;
if (!adev)
return false;
of_compatible = adev->data.of_compatible;
if (!of_match_table || !of_compatible)
return false;
if (of_compatible->type == ACPI_TYPE_PACKAGE) {
nval = of_compatible->package.count;
obj = of_compatible->package.elements;
} else { /* Must be ACPI_TYPE_STRING. */
nval = 1;
obj = of_compatible;
}
/* Now we can look for the driver DT compatible strings */
for (i = 0; i < nval; i++, obj++) {
const struct of_device_id *id;
for (id = of_match_table; id->compatible[0]; id++)
if (!strcasecmp(obj->string.pointer, id->compatible)) {
if (of_id)
*of_id = id;
return true;
}
}
return false;
}
static bool acpi_of_modalias(struct acpi_device *adev,
char *modalias, size_t len)
{
const union acpi_object *of_compatible;
const union acpi_object *obj;
const char *str, *chr;
of_compatible = adev->data.of_compatible;
if (!of_compatible)
return false;
if (of_compatible->type == ACPI_TYPE_PACKAGE)
obj = of_compatible->package.elements;
else /* Must be ACPI_TYPE_STRING. */
obj = of_compatible;
str = obj->string.pointer;
chr = strchr(str, ',');
strscpy(modalias, chr ? chr + 1 : str, len);
return true;
}
/**
* acpi_set_modalias - Set modalias using "compatible" property or supplied ID
* @adev: ACPI device object to match
* @default_id: ID string to use as default if no compatible string found
* @modalias: Pointer to buffer that modalias value will be copied into
* @len: Length of modalias buffer
*
* This is a counterpart of of_alias_from_compatible() for struct acpi_device
* objects. If there is a compatible string for @adev, it will be copied to
* @modalias with the vendor prefix stripped; otherwise, @default_id will be
* used.
*/
void acpi_set_modalias(struct acpi_device *adev, const char *default_id,
char *modalias, size_t len)
{
if (!acpi_of_modalias(adev, modalias, len))
strscpy(modalias, default_id, len);
}
EXPORT_SYMBOL_GPL(acpi_set_modalias);
static bool __acpi_match_device_cls(const struct acpi_device_id *id,
struct acpi_hardware_id *hwid)
{
int i, msk, byte_shift;
char buf[3];
if (!id->cls)
return false;
/* Apply class-code bitmask, before checking each class-code byte */
for (i = 1; i <= 3; i++) {
byte_shift = 8 * (3 - i);
msk = (id->cls_msk >> byte_shift) & 0xFF;
if (!msk)
continue;
sprintf(buf, "%02x", (id->cls >> byte_shift) & msk);
if (strncmp(buf, &hwid->id[(i - 1) * 2], 2))
return false;
}
return true;
}
static bool __acpi_match_device(const struct acpi_device *device,
const struct acpi_device_id *acpi_ids,
const struct of_device_id *of_ids,
const struct acpi_device_id **acpi_id,
const struct of_device_id **of_id)
{
const struct acpi_device_id *id;
struct acpi_hardware_id *hwid;
/*
* If the device is not present, it is unnecessary to load device
* driver for it.
*/
if (!device || !device->status.present)
return false;
list_for_each_entry(hwid, &device->pnp.ids, list) {
/* First, check the ACPI/PNP IDs provided by the caller. */
if (acpi_ids) {
for (id = acpi_ids; id->id[0] || id->cls; id++) {
if (id->id[0] && !strcmp((char *)id->id, hwid->id))
goto out_acpi_match;
if (id->cls && __acpi_match_device_cls(id, hwid))
goto out_acpi_match;
}
}
/*
* Next, check ACPI_DT_NAMESPACE_HID and try to match the
* "compatible" property if found.
*/
if (!strcmp(ACPI_DT_NAMESPACE_HID, hwid->id))
return acpi_of_match_device(device, of_ids, of_id);
}
return false;
out_acpi_match:
if (acpi_id)
*acpi_id = id;
return true;
}
/**
* acpi_match_acpi_device - Match an ACPI device against a given list of ACPI IDs
* @ids: Array of struct acpi_device_id objects to match against.
* @adev: The ACPI device pointer to match.
*
* Match the ACPI device @adev against a given list of ACPI IDs @ids.
*
* Return:
* a pointer to the first matching ACPI ID on success or %NULL on failure.
*/
const struct acpi_device_id *acpi_match_acpi_device(const struct acpi_device_id *ids,
const struct acpi_device *adev)
{
const struct acpi_device_id *id = NULL;
__acpi_match_device(adev, ids, NULL, &id, NULL);
return id;
}
EXPORT_SYMBOL_GPL(acpi_match_acpi_device);
/**
* acpi_match_device - Match a struct device against a given list of ACPI IDs
* @ids: Array of struct acpi_device_id object to match against.
* @dev: The device structure to match.
*
* Check if @dev has a valid ACPI handle and if there is a struct acpi_device
* object for that handle and use that object to match against a given list of
* device IDs.
*
* Return a pointer to the first matching ID on success or %NULL on failure.
*/
const struct acpi_device_id *acpi_match_device(const struct acpi_device_id *ids,
const struct device *dev)
{
return acpi_match_acpi_device(ids, acpi_companion_match(dev));
}
EXPORT_SYMBOL_GPL(acpi_match_device);
static const void *acpi_of_device_get_match_data(const struct device *dev)
{
struct acpi_device *adev = ACPI_COMPANION(dev);
const struct of_device_id *match = NULL;
if (!acpi_of_match_device(adev, dev->driver->of_match_table, &match))
return NULL;
return match->data;
}
const void *acpi_device_get_match_data(const struct device *dev)
{
const struct acpi_device_id *acpi_ids = dev->driver->acpi_match_table;
const struct acpi_device_id *match;
if (!acpi_ids)
return acpi_of_device_get_match_data(dev);
match = acpi_match_device(acpi_ids, dev);
if (!match)
return NULL;
return (const void *)match->driver_data;
}
EXPORT_SYMBOL_GPL(acpi_device_get_match_data);
int acpi_match_device_ids(struct acpi_device *device,
const struct acpi_device_id *ids)
{
return __acpi_match_device(device, ids, NULL, NULL, NULL) ? 0 : -ENOENT;
}
EXPORT_SYMBOL(acpi_match_device_ids);
bool acpi_driver_match_device(struct device *dev,
const struct device_driver *drv)
{
const struct acpi_device_id *acpi_ids = drv->acpi_match_table;
const struct of_device_id *of_ids = drv->of_match_table;
if (!acpi_ids)
return acpi_of_match_device(ACPI_COMPANION(dev), of_ids, NULL);
return __acpi_match_device(acpi_companion_match(dev), acpi_ids, of_ids, NULL, NULL);
}
EXPORT_SYMBOL_GPL(acpi_driver_match_device);
/* --------------------------------------------------------------------------
ACPI Driver Management
-------------------------------------------------------------------------- */
/**
* acpi_bus_register_driver - register a driver with the ACPI bus
* @driver: driver being registered
*
* Registers a driver with the ACPI bus. Searches the namespace for all
* devices that match the driver's criteria and binds. Returns zero for
* success or a negative error status for failure.
*/
int acpi_bus_register_driver(struct acpi_driver *driver)
{
if (acpi_disabled)
return -ENODEV;
driver->drv.name = driver->name;
driver->drv.bus = &acpi_bus_type;
driver->drv.owner = driver->owner;
return driver_register(&driver->drv);
}
EXPORT_SYMBOL(acpi_bus_register_driver);
/**
* acpi_bus_unregister_driver - unregisters a driver with the ACPI bus
* @driver: driver to unregister
*
* Unregisters a driver with the ACPI bus. Searches the namespace for all
* devices that match the driver's criteria and unbinds.
*/
void acpi_bus_unregister_driver(struct acpi_driver *driver)
{
driver_unregister(&driver->drv);
}
EXPORT_SYMBOL(acpi_bus_unregister_driver);
/* --------------------------------------------------------------------------
ACPI Bus operations
-------------------------------------------------------------------------- */
static int acpi_bus_match(struct device *dev, struct device_driver *drv)
{
struct acpi_device *acpi_dev = to_acpi_device(dev);
struct acpi_driver *acpi_drv = to_acpi_driver(drv);
return acpi_dev->flags.match_driver
&& !acpi_match_device_ids(acpi_dev, acpi_drv->ids);
}
static int acpi_device_uevent(const struct device *dev, struct kobj_uevent_env *env)
{
return __acpi_device_uevent_modalias(to_acpi_device(dev), env);
}
static int acpi_device_probe(struct device *dev)
{
struct acpi_device *acpi_dev = to_acpi_device(dev);
struct acpi_driver *acpi_drv = to_acpi_driver(dev->driver);
int ret;
if (acpi_dev->handler && !acpi_is_pnp_device(acpi_dev))
return -EINVAL;
if (!acpi_drv->ops.add)
return -ENOSYS;
ret = acpi_drv->ops.add(acpi_dev);
if (ret) {
acpi_dev->driver_data = NULL;
return ret;
}
pr_debug("Driver [%s] successfully bound to device [%s]\n",
acpi_drv->name, acpi_dev->pnp.bus_id);
if (acpi_drv->ops.notify) {
ACPI: bus: Rework system-level device notification handling For ACPI drivers that provide a ->notify() callback and set ACPI_DRIVER_ALL_NOTIFY_EVENTS in their flags, that callback can be invoked while either the ->add() or the ->remove() callback is running without any synchronization at the bus type level which is counter to the common-sense expectation that notification handling should only be enabled when the driver is actually bound to the device. As a result, if the driver is not careful enough, it's ->notify() callback may crash when it is invoked too early or too late [1]. This issue has been amplified by commit d6fb6ee1820c ("ACPI: bus: Drop driver member of struct acpi_device") that made acpi_bus_notify() check for the presence of the driver and its ->notify() callback directly instead of using an extra driver pointer that was only set and cleared by the bus type code, but it was present before that commit although it was harder to reproduce then. It can be addressed by using the observation that acpi_device_install_notify_handler() can be modified to install the handler for all types of events when ACPI_DRIVER_ALL_NOTIFY_EVENTS is set in the driver flags, in which case acpi_bus_notify() will not need to invoke the driver's ->notify() callback any more and that callback will only be invoked after acpi_device_install_notify_handler() has run and before acpi_device_remove_notify_handler() runs, which implies the correct ordering with respect to the other ACPI driver callbacks. Modify the code accordingly and while at it, drop two redundant local variables from acpi_bus_notify() and turn its description comment into a proper kerneldoc one. Fixes: d6fb6ee1820c ("ACPI: bus: Drop driver member of struct acpi_device") Link: https://lore.kernel.org/linux-acpi/9f6cba7a8a57e5a687c934e8e406e28c.squirrel@mail.panix.com # [1] Reported-by: Pierre Asselin <pa@panix.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Pierre Asselin <pa@panix.com>
2023-03-24 13:33:42 +00:00
ret = acpi_device_install_notify_handler(acpi_dev, acpi_drv);
if (ret) {
if (acpi_drv->ops.remove)
acpi_drv->ops.remove(acpi_dev);
acpi_dev->driver_data = NULL;
return ret;
}
}
pr_debug("Found driver [%s] for device [%s]\n", acpi_drv->name,
acpi_dev->pnp.bus_id);
get_device(dev);
return 0;
}
bus: Make remove callback return void The driver core ignores the return value of this callback because there is only little it can do when a device disappears. This is the final bit of a long lasting cleanup quest where several buses were converted to also return void from their remove callback. Additionally some resource leaks were fixed that were caused by drivers returning an error code in the expectation that the driver won't go away. With struct bus_type::remove returning void it's prevented that newly implemented buses return an ignored error code and so don't anticipate wrong expectations for driver authors. Reviewed-by: Tom Rix <trix@redhat.com> (For fpga) Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio) Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts) Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb) Acked-by: Pali Rohár <pali@kernel.org> Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media) Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform) Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Juergen Gross <jgross@suse.com> (For xen) Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd) Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb) Acked-by: Johan Hovold <johan@kernel.org> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus) Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio) Acked-by: Maximilian Luz <luzmaximilian@gmail.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec) Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack) Acked-by: Geoff Levand <geoff@infradead.org> (For ps3) Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt) Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th) Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia) Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI) Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr) Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid) Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM) Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa) Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire) Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid) Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox) Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss) Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC) Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Finn Thain <fthain@linux-m68k.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-13 19:35:22 +00:00
static void acpi_device_remove(struct device *dev)
{
struct acpi_device *acpi_dev = to_acpi_device(dev);
struct acpi_driver *acpi_drv = to_acpi_driver(dev->driver);
if (acpi_drv->ops.notify)
ACPI: bus: Rework system-level device notification handling For ACPI drivers that provide a ->notify() callback and set ACPI_DRIVER_ALL_NOTIFY_EVENTS in their flags, that callback can be invoked while either the ->add() or the ->remove() callback is running without any synchronization at the bus type level which is counter to the common-sense expectation that notification handling should only be enabled when the driver is actually bound to the device. As a result, if the driver is not careful enough, it's ->notify() callback may crash when it is invoked too early or too late [1]. This issue has been amplified by commit d6fb6ee1820c ("ACPI: bus: Drop driver member of struct acpi_device") that made acpi_bus_notify() check for the presence of the driver and its ->notify() callback directly instead of using an extra driver pointer that was only set and cleared by the bus type code, but it was present before that commit although it was harder to reproduce then. It can be addressed by using the observation that acpi_device_install_notify_handler() can be modified to install the handler for all types of events when ACPI_DRIVER_ALL_NOTIFY_EVENTS is set in the driver flags, in which case acpi_bus_notify() will not need to invoke the driver's ->notify() callback any more and that callback will only be invoked after acpi_device_install_notify_handler() has run and before acpi_device_remove_notify_handler() runs, which implies the correct ordering with respect to the other ACPI driver callbacks. Modify the code accordingly and while at it, drop two redundant local variables from acpi_bus_notify() and turn its description comment into a proper kerneldoc one. Fixes: d6fb6ee1820c ("ACPI: bus: Drop driver member of struct acpi_device") Link: https://lore.kernel.org/linux-acpi/9f6cba7a8a57e5a687c934e8e406e28c.squirrel@mail.panix.com # [1] Reported-by: Pierre Asselin <pa@panix.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Pierre Asselin <pa@panix.com>
2023-03-24 13:33:42 +00:00
acpi_device_remove_notify_handler(acpi_dev, acpi_drv);
if (acpi_drv->ops.remove)
acpi_drv->ops.remove(acpi_dev);
acpi_dev->driver_data = NULL;
put_device(dev);
}
struct bus_type acpi_bus_type = {
.name = "acpi",
.match = acpi_bus_match,
.probe = acpi_device_probe,
.remove = acpi_device_remove,
.uevent = acpi_device_uevent,
};
int acpi_bus_for_each_dev(int (*fn)(struct device *, void *), void *data)
{
return bus_for_each_dev(&acpi_bus_type, NULL, data, fn);
}
EXPORT_SYMBOL_GPL(acpi_bus_for_each_dev);
struct acpi_dev_walk_context {
int (*fn)(struct acpi_device *, void *);
void *data;
};
static int acpi_dev_for_one_check(struct device *dev, void *context)
{
struct acpi_dev_walk_context *adwc = context;
if (dev->bus != &acpi_bus_type)
return 0;
return adwc->fn(to_acpi_device(dev), adwc->data);
}
EXPORT_SYMBOL_GPL(acpi_dev_for_each_child);
int acpi_dev_for_each_child(struct acpi_device *adev,
int (*fn)(struct acpi_device *, void *), void *data)
{
struct acpi_dev_walk_context adwc = {
.fn = fn,
.data = data,
};
return device_for_each_child(&adev->dev, &adwc, acpi_dev_for_one_check);
}
int acpi_dev_for_each_child_reverse(struct acpi_device *adev,
int (*fn)(struct acpi_device *, void *),
void *data)
{
struct acpi_dev_walk_context adwc = {
.fn = fn,
.data = data,
};
return device_for_each_child_reverse(&adev->dev, &adwc, acpi_dev_for_one_check);
}
/* --------------------------------------------------------------------------
Initialization/Cleanup
-------------------------------------------------------------------------- */
static int __init acpi_bus_init_irq(void)
{
acpi_status status;
char *message = NULL;
/*
* Let the system know what interrupt model we are using by
* evaluating the \_PIC object, if exists.
*/
switch (acpi_irq_model) {
case ACPI_IRQ_MODEL_PIC:
message = "PIC";
break;
case ACPI_IRQ_MODEL_IOAPIC:
message = "IOAPIC";
break;
case ACPI_IRQ_MODEL_IOSAPIC:
message = "IOSAPIC";
break;
case ACPI_IRQ_MODEL_GIC:
message = "GIC";
break;
case ACPI_IRQ_MODEL_PLATFORM:
message = "platform specific model";
break;
case ACPI_IRQ_MODEL_LPIC:
message = "LPIC";
break;
default:
pr_info("Unknown interrupt routing model\n");
return -ENODEV;
}
pr_info("Using %s for interrupt routing\n", message);
status = acpi_execute_simple_method(NULL, "\\_PIC", acpi_irq_model);
if (ACPI_FAILURE(status) && (status != AE_NOT_FOUND)) {
pr_info("_PIC evaluation failed: %s\n", acpi_format_exception(status));
return -ENODEV;
}
return 0;
}
ACPI / init: Switch over platform to the ACPI mode later Commit 73f7d1ca3263 "ACPI / init: Run acpi_early_init() before timekeeping_init()" moved the ACPI subsystem initialization, including the ACPI mode enabling, to an earlier point in the initialization sequence, to allow the timekeeping subsystem use ACPI early. Unfortunately, that resulted in boot regressions on some systems and the early ACPI initialization was moved toward its original position in the kernel initialization code by commit c4e1acbb35e4 "ACPI / init: Invoke early ACPI initialization later". However, that turns out to be insufficient, as boot is still broken on the Tyan S8812 mainboard. To fix that issue, split the ACPI early initialization code into two pieces so the majority of it still located in acpi_early_init() and the part switching over the platform into the ACPI mode goes into a new function, acpi_subsystem_init(), executed at the original early ACPI initialization spot. That fixes the Tyan S8812 boot problem, but still allows ACPI tables to be loaded earlier which is useful to the EFI code in efi_enter_virtual_mode(). Link: https://bugzilla.kernel.org/show_bug.cgi?id=97141 Fixes: 73f7d1ca3263 "ACPI / init: Run acpi_early_init() before timekeeping_init()" Reported-and-tested-by: Marius Tolzmann <tolzmann@molgen.mpg.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lee, Chun-Yi <jlee@suse.com>
2015-06-09 23:33:36 +00:00
/**
* acpi_early_init - Initialize ACPICA and populate the ACPI namespace.
*
* The ACPI tables are accessible after this, but the handling of events has not
* been initialized and the global lock is not available yet, so AML should not
* be executed at this point.
*
* Doing this before switching the EFI runtime services to virtual mode allows
* the EfiBootServices memory to be freed slightly earlier on boot.
*/
void __init acpi_early_init(void)
{
acpi_status status;
if (acpi_disabled)
return;
pr_info("Core revision %08x\n", ACPI_CA_VERSION);
/* enable workarounds, unless strict ACPI spec. compliance */
if (!acpi_strict)
acpi_gbl_enable_interpreter_slack = TRUE;
acpi_permanent_mmap = true;
#ifdef CONFIG_X86
/*
* If the machine falls into the DMI check table,
* DSDT will be copied to memory.
* Note that calling dmi_check_system() here on other architectures
* would not be OK because only x86 initializes dmi early enough.
* Thankfully only x86 systems need such quirks for now.
*/
dmi_check_system(dsdt_dmi_table);
#endif
status = acpi_reallocate_root_table();
if (ACPI_FAILURE(status)) {
pr_err("Unable to reallocate ACPI tables\n");
goto error0;
}
status = acpi_initialize_subsystem();
if (ACPI_FAILURE(status)) {
pr_err("Unable to initialize the ACPI Interpreter\n");
goto error0;
}
#ifdef CONFIG_X86
if (!acpi_ioapic) {
/* compatible (0) means level (3) */
if (!(acpi_sci_flags & ACPI_MADT_TRIGGER_MASK)) {
acpi_sci_flags &= ~ACPI_MADT_TRIGGER_MASK;
acpi_sci_flags |= ACPI_MADT_TRIGGER_LEVEL;
}
/* Set PIC-mode SCI trigger type */
acpi_pic_sci_set_trigger(acpi_gbl_FADT.sci_interrupt,
(acpi_sci_flags & ACPI_MADT_TRIGGER_MASK) >> 2);
} else {
/*
* now that acpi_gbl_FADT is initialized,
* update it with result from INT_SRC_OVR parsing
*/
acpi_gbl_FADT.sci_interrupt = acpi_sci_override_gsi;
}
#endif
ACPI / init: Switch over platform to the ACPI mode later Commit 73f7d1ca3263 "ACPI / init: Run acpi_early_init() before timekeeping_init()" moved the ACPI subsystem initialization, including the ACPI mode enabling, to an earlier point in the initialization sequence, to allow the timekeeping subsystem use ACPI early. Unfortunately, that resulted in boot regressions on some systems and the early ACPI initialization was moved toward its original position in the kernel initialization code by commit c4e1acbb35e4 "ACPI / init: Invoke early ACPI initialization later". However, that turns out to be insufficient, as boot is still broken on the Tyan S8812 mainboard. To fix that issue, split the ACPI early initialization code into two pieces so the majority of it still located in acpi_early_init() and the part switching over the platform into the ACPI mode goes into a new function, acpi_subsystem_init(), executed at the original early ACPI initialization spot. That fixes the Tyan S8812 boot problem, but still allows ACPI tables to be loaded earlier which is useful to the EFI code in efi_enter_virtual_mode(). Link: https://bugzilla.kernel.org/show_bug.cgi?id=97141 Fixes: 73f7d1ca3263 "ACPI / init: Run acpi_early_init() before timekeeping_init()" Reported-and-tested-by: Marius Tolzmann <tolzmann@molgen.mpg.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lee, Chun-Yi <jlee@suse.com>
2015-06-09 23:33:36 +00:00
return;
error0:
disable_acpi();
}
/**
* acpi_subsystem_init - Finalize the early initialization of ACPI.
*
* Switch over the platform to the ACPI mode (if possible).
ACPI / init: Switch over platform to the ACPI mode later Commit 73f7d1ca3263 "ACPI / init: Run acpi_early_init() before timekeeping_init()" moved the ACPI subsystem initialization, including the ACPI mode enabling, to an earlier point in the initialization sequence, to allow the timekeeping subsystem use ACPI early. Unfortunately, that resulted in boot regressions on some systems and the early ACPI initialization was moved toward its original position in the kernel initialization code by commit c4e1acbb35e4 "ACPI / init: Invoke early ACPI initialization later". However, that turns out to be insufficient, as boot is still broken on the Tyan S8812 mainboard. To fix that issue, split the ACPI early initialization code into two pieces so the majority of it still located in acpi_early_init() and the part switching over the platform into the ACPI mode goes into a new function, acpi_subsystem_init(), executed at the original early ACPI initialization spot. That fixes the Tyan S8812 boot problem, but still allows ACPI tables to be loaded earlier which is useful to the EFI code in efi_enter_virtual_mode(). Link: https://bugzilla.kernel.org/show_bug.cgi?id=97141 Fixes: 73f7d1ca3263 "ACPI / init: Run acpi_early_init() before timekeeping_init()" Reported-and-tested-by: Marius Tolzmann <tolzmann@molgen.mpg.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lee, Chun-Yi <jlee@suse.com>
2015-06-09 23:33:36 +00:00
*
* Doing this too early is generally unsafe, but at the same time it needs to be
* done before all things that really depend on ACPI. The right spot appears to
* be before finalizing the EFI initialization.
*/
void __init acpi_subsystem_init(void)
{
acpi_status status;
if (acpi_disabled)
return;
status = acpi_enable_subsystem(~ACPI_NO_ACPI_ENABLE);
if (ACPI_FAILURE(status)) {
pr_err("Unable to enable ACPI\n");
ACPI / init: Switch over platform to the ACPI mode later Commit 73f7d1ca3263 "ACPI / init: Run acpi_early_init() before timekeeping_init()" moved the ACPI subsystem initialization, including the ACPI mode enabling, to an earlier point in the initialization sequence, to allow the timekeeping subsystem use ACPI early. Unfortunately, that resulted in boot regressions on some systems and the early ACPI initialization was moved toward its original position in the kernel initialization code by commit c4e1acbb35e4 "ACPI / init: Invoke early ACPI initialization later". However, that turns out to be insufficient, as boot is still broken on the Tyan S8812 mainboard. To fix that issue, split the ACPI early initialization code into two pieces so the majority of it still located in acpi_early_init() and the part switching over the platform into the ACPI mode goes into a new function, acpi_subsystem_init(), executed at the original early ACPI initialization spot. That fixes the Tyan S8812 boot problem, but still allows ACPI tables to be loaded earlier which is useful to the EFI code in efi_enter_virtual_mode(). Link: https://bugzilla.kernel.org/show_bug.cgi?id=97141 Fixes: 73f7d1ca3263 "ACPI / init: Run acpi_early_init() before timekeeping_init()" Reported-and-tested-by: Marius Tolzmann <tolzmann@molgen.mpg.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lee, Chun-Yi <jlee@suse.com>
2015-06-09 23:33:36 +00:00
disable_acpi();
} else {
/*
* If the system is using ACPI then we can be reasonably
* confident that any regulators are managed by the firmware
* so tell the regulator core it has everything it needs to
* know.
*/
regulator_has_full_constraints();
}
}
static acpi_status acpi_bus_table_handler(u32 event, void *table, void *context)
{
if (event == ACPI_TABLE_EVENT_LOAD)
acpi_scan_table_notify();
return acpi_sysfs_table_handler(event, table, context);
}
static int __init acpi_bus_init(void)
{
int result;
acpi_status status;
acpi_os_initialize1();
status = acpi_load_tables();
if (ACPI_FAILURE(status)) {
pr_err("Unable to load the System Description Tables\n");
goto error1;
}
ACPI: EC: Look for ECDT EC after calling acpi_load_tables() Some systems have had functional issues since commit 5a8361f7ecce (ACPICA: Integrate package handling with module-level code) that, among other things, changed the initial values of the acpi_gbl_group_module_level_code and acpi_gbl_parse_table_as_term_list global flags in ACPICA which implicitly caused acpi_ec_ecdt_probe() to be called before acpi_load_tables() on the vast majority of platforms. Namely, before commit 5a8361f7ecce, acpi_load_tables() was called from acpi_early_init() if acpi_gbl_parse_table_as_term_list was FALSE and acpi_gbl_group_module_level_code was TRUE, which almost always was the case as FALSE and TRUE were their initial values, respectively. The acpi_gbl_parse_table_as_term_list value would be changed to TRUE for a couple of platforms in acpi_quirks_dmi_table[], but it remained FALSE in the vast majority of cases. After commit 5a8361f7ecce, the initial values of the two flags have been reversed, so in effect acpi_load_tables() has not been called from acpi_early_init() any more. That, in turn, affects acpi_ec_ecdt_probe() which is invoked before acpi_load_tables() now and it is not possible to evaluate the _REG method for the EC address space handler installed by it. That effectively causes the EC address space to be inaccessible to AML on platforms with an ECDT matching the EC device definition in the DSDT and functional problems ensue in there. Because the default behavior before commit 5a8361f7ecce was to call acpi_ec_ecdt_probe() after acpi_load_tables(), it should be safe to do that again. Moreover, the EC address space handler installed by acpi_ec_ecdt_probe() is only needed for AML to be able to access the EC address space and the only AML that can run during acpi_load_tables() is module-level code which only is allowed to access address spaces with default handlers (memory, I/O and PCI config space). For this reason, move the acpi_ec_ecdt_probe() invocation back to acpi_bus_init(), from where it was taken away by commit d737f333b211 (ACPI: probe ECDT before loading AML tables regardless of module-level code flag), and put it after the invocation of acpi_load_tables() to restore the original code ordering from before commit 5a8361f7ecce. Fixes: 5a8361f7ecce ("ACPICA: Integrate package handling with module-level code") Link: https://bugzilla.kernel.org/show_bug.cgi?id=199981 Reported-by: step-ali <sunmooon15@gmail.com> Reported-by: Charles Stanhope <charles.stanhope@gmail.com> Tested-by: Charles Stanhope <charles.stanhope@gmail.com> Reported-by: Paulo Nascimento <paulo.ulusu@googlemail.com> Reported-by: David Purton <dcpurton@marshwiggle.net> Reported-by: Adam Harvey <adam@adamharvey.name> Reported-by: Zhang Rui <rui.zhang@intel.com> Tested-by: Zhang Rui <rui.zhang@intel.com> Tested-by: Jean-Marc Lenoir <archlinux@jihemel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-08 23:34:37 +00:00
/*
* ACPI 2.0 requires the EC driver to be loaded and work before the EC
* device is found in the namespace.
*
* This is accomplished by looking for the ECDT table and getting the EC
* parameters out of that.
*
* Do that before calling acpi_initialize_objects() which may trigger EC
* address space accesses.
*/
acpi_ec_ecdt_probe();
status = acpi_enable_subsystem(ACPI_NO_ACPI_ENABLE);
if (ACPI_FAILURE(status)) {
pr_err("Unable to start the ACPI Interpreter\n");
goto error1;
}
status = acpi_initialize_objects(ACPI_FULL_INITIALIZATION);
if (ACPI_FAILURE(status)) {
pr_err("Unable to initialize ACPI objects\n");
goto error1;
}
/*
* _OSC method may exist in module level code,
* so it must be run after ACPI_FULL_INITIALIZATION
*/
acpi_bus_osc_negotiate_platform_control();
acpi_bus_osc_negotiate_usb_control();
/*
* _PDC control method may load dynamic SSDT tables,
* and we need to install the table handler before that.
*/
status = acpi_install_table_handler(acpi_bus_table_handler, NULL);
acpi_sysfs_init();
acpi_early_processor_control_setup();
ACPI: Enable EC device immediately after ACPI full initialization when there is no ECDT table and no _INI object for EC device, it will be enabled before scanning ACPI device. But it is too late after the following the commit is merged. >commit 7752d5cfe3d11ca0bb9c673ec38bd78ba6578f8e > Author: Robert Hancock <hancockr@shaw.ca> > Date: Fri Feb 15 01:27:20 2008 -0800 >x86: validate against acpi motherboard resources After the above commit is merged, OS will check whether MCFG area is reserved in ACPI motherboard resources by calling the function of acpi_get_devices when there exists MCFG table. In the acpi_get_devices the _STA object will be evaluated to check the status of the ACPI device. On some broken BIOS the MYEC object of EC device is initialized as one, which indicates that EC operation region is already accessible before enabling EC device.So on these broken BIOS the EC operation region will be accessed in course of evaluating the _STA object before enabling EC device, which causes that OS will print the following warning messages: >ACPI Error (evregion-0315): No handler for Region [EC__] (ffff88007f8145e8) [EmbeddedControl] [20080609] >ACPI Error (exfldio-0290): Region EmbeddedControl(3) has no handler [20080321] >ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG. EC__.BAT1._STA] (Node ffff81013fc17a00), AE_NOT_EXIST >ACPI Error (uteval-0233): Method execution failed [\_SB_.PCI0.SBRG.EC__.BAT1. _STA] (Node ffff81013fc17a00), AE_NOT_EXIST Although the above warning message is harmless, it looks confusing. So it is necessary to enable EC device as early as possible.Maybe it is appropriate to enable it immediately after ACPI full initialization. http://bugzilla.kernel.org/show_bug.cgi?id=11255 http://bugzilla.kernel.org/show_bug.cgi?id=11374 http://bugzilla.kernel.org/show_bug.cgi?id=11660 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Acked-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-06 02:31:36 +00:00
/*
* Maybe EC region is required at bus_scan/acpi_get_devices. So it
* is necessary to enable it as early as possible.
*/
acpi_ec_dsdt_probe();
ACPI: Enable EC device immediately after ACPI full initialization when there is no ECDT table and no _INI object for EC device, it will be enabled before scanning ACPI device. But it is too late after the following the commit is merged. >commit 7752d5cfe3d11ca0bb9c673ec38bd78ba6578f8e > Author: Robert Hancock <hancockr@shaw.ca> > Date: Fri Feb 15 01:27:20 2008 -0800 >x86: validate against acpi motherboard resources After the above commit is merged, OS will check whether MCFG area is reserved in ACPI motherboard resources by calling the function of acpi_get_devices when there exists MCFG table. In the acpi_get_devices the _STA object will be evaluated to check the status of the ACPI device. On some broken BIOS the MYEC object of EC device is initialized as one, which indicates that EC operation region is already accessible before enabling EC device.So on these broken BIOS the EC operation region will be accessed in course of evaluating the _STA object before enabling EC device, which causes that OS will print the following warning messages: >ACPI Error (evregion-0315): No handler for Region [EC__] (ffff88007f8145e8) [EmbeddedControl] [20080609] >ACPI Error (exfldio-0290): Region EmbeddedControl(3) has no handler [20080321] >ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG. EC__.BAT1._STA] (Node ffff81013fc17a00), AE_NOT_EXIST >ACPI Error (uteval-0233): Method execution failed [\_SB_.PCI0.SBRG.EC__.BAT1. _STA] (Node ffff81013fc17a00), AE_NOT_EXIST Although the above warning message is harmless, it looks confusing. So it is necessary to enable EC device as early as possible.Maybe it is appropriate to enable it immediately after ACPI full initialization. http://bugzilla.kernel.org/show_bug.cgi?id=11255 http://bugzilla.kernel.org/show_bug.cgi?id=11374 http://bugzilla.kernel.org/show_bug.cgi?id=11660 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Acked-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-06 02:31:36 +00:00
pr_info("Interpreter enabled\n");
/* Initialize sleep structures */
acpi_sleep_init();
/*
* Get the system interrupt model and evaluate \_PIC.
*/
result = acpi_bus_init_irq();
if (result)
goto error1;
/*
* Register the for all standard device notifications.
*/
status =
acpi_install_notify_handler(ACPI_ROOT_OBJECT, ACPI_SYSTEM_NOTIFY,
&acpi_bus_notify, NULL);
if (ACPI_FAILURE(status)) {
pr_err("Unable to register for system notifications\n");
goto error1;
}
/*
* Create the top ACPI proc directory
*/
acpi_root_dir = proc_mkdir(ACPI_BUS_FILE_ROOT, NULL);
result = bus_register(&acpi_bus_type);
if (!result)
return 0;
/* Mimic structured exception handling */
error1:
acpi_terminate();
return -ENODEV;
}
struct kobject *acpi_kobj;
EXPORT_SYMBOL_GPL(acpi_kobj);
static int __init acpi_init(void)
{
int result;
if (acpi_disabled) {
pr_info("Interpreter disabled.\n");
return -ENODEV;
}
acpi_kobj = kobject_create_and_add("acpi", firmware_kobj);
if (!acpi_kobj)
pr_debug("%s: kset create error\n", __func__);
ACPI: PRM: implement OperationRegion handler for the PlatformRtMechanism subtype Platform Runtime Mechanism (PRM) is a firmware interface that exposes a set of binary executables that can either be called from the AML interpreter or device drivers by bypassing the AML interpreter. This change implements the AML interpreter path. According to the specification [1], PRM services are listed in an ACPI table called the PRMT. This patch parses module and handler information listed in the PRMT and registers the PlatformRtMechanism OpRegion handler before ACPI tables are loaded. Each service is defined by a 16-byte GUID and called from writing a 26-byte ASL buffer containing the identifier to a FieldUnit object defined inside a PlatformRtMechanism OperationRegion. OperationRegion (PRMR, PlatformRtMechanism, 0, 26) Field (PRMR, BufferAcc, NoLock, Preserve) { PRMF, 208 // Write to this field to invoke the OperationRegion Handler } The 26-byte ASL buffer is defined as the following: Byte Offset Byte Length Description ============================================================= 0 1 PRM OperationRegion handler status 1 8 PRM service status 9 1 PRM command 10 16 PRM handler GUID The ASL caller fills out a 26-byte buffer containing the PRM command and the PRM handler GUID like so: /* Local0 is the PRM data buffer */ Local0 = buffer (26){} /* Create byte fields over the buffer */ CreateByteField (Local0, 0x9, CMD) CreateField (Local0, 0x50, 0x80, GUID) /* Fill in the command and data fields of the data buffer */ CMD = 0 // run command GUID = ToUUID("xxxx-xx-xxx-xxxx") /* * Invoke PRM service with an ID that matches GUID and save the * result. */ Local0 = (\_SB.PRMT.PRMF = Local0) Byte offset 0 - 8 are written by the handler as a status passed back to AML and used by ASL like so: /* Create byte fields over the buffer */ CreateByteField (Local0, 0x0, PSTA) CreateQWordField (Local0, 0x1, USTA) In this ASL code, PSTA contains a status from the OperationRegion and USTA contains a status from the PRM service. The 26-byte buffer is recieved by acpi_platformrt_space_handler. This handler will look at the command value and the handler guid and take the approperiate actions. Command value Action ===================================================================== 0 Run the PRM service indicated by the PRM handler GUID (bytes 10-26) 1 Prevent PRM runtime updates from happening to the service's parent module 2 Allow PRM updates from happening to the service's parent module This patch enables command value 0. Link: https://uefi.org/sites/default/files/resources/Platform%20Runtime%20Mechanism%20-%20with%20legal%20notice.pdf # [1] Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-10 03:41:52 +00:00
init_prmt();
ACPI: PCC: Implement OperationRegion handler for the PCC Type 3 subtype PCC OpRegion provides a mechanism to communicate with the platform directly from the AML. PCCT provides the list of PCC channel available in the platform, a subset or all of them can be used in PCC Opregion. This patch registers the PCC OpRegion handler before ACPI tables are loaded. This relies on the special context data passed to identify and set up the PCC channel before the OpRegion handler is executed for the first time. Typical PCC Opregion declaration looks like this: OperationRegion (PFRM, PCC, 2, 0x74) Field (PFRM, ByteAcc, NoLock, Preserve) { SIGN, 32, FLGS, 32, LEN, 32, CMD, 32, DATA, 800 } It contains four named double words followed by 100 bytes of buffer names DATA. ASL can fill out the buffer something like: /* Create global or local buffer */ Name (BUFF, Buffer (0x0C){}) /* Create double word fields over the buffer */ CreateDWordField (BUFF, 0x0, WD0) CreateDWordField (BUFF, 0x04, WD1) CreateDWordField (BUFF, 0x08, WD2) /* Fill the named fields */ WD0 = 0x50434300 SIGN = BUFF WD0 = 1 FLGS = BUFF WD0 = 0x10 LEN = BUFF /* Fill the payload in the DATA buffer */ WD0 = 0 WD1 = 0x08 WD2 = 0 DATA = BUFF /* Write to CMD field to trigger handler */ WD0 = 0x4404 CMD = BUFF This buffer is received by acpi_pcc_opregion_space_handler. This handler will fetch the complete buffer via internal_pcc_buffer. The setup handler will receive the special PCC context data which will contain the PCC channel index which used to set up the channel. The buffer pointer and length is saved in region context which is then used in the handler. (kernel test robot: Build failure with CONFIG_ACPI_DEBUGGER) Link: https://lore.kernel.org/r/202201041539.feAV0l27-lkp@intel.com Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-01-04 19:51:08 +00:00
acpi_init_pcc();
result = acpi_bus_init();
if (result) {
kobject_put(acpi_kobj);
disable_acpi();
return result;
}
acpi_init_ffh();
pci_mmcfg_late_init();
acpi_viot_early_init();
acpi_hest_init();
acpi_ghes_init();
acpi_arm_init();
acpi_scan_init();
acpi_ec_init();
acpi_debugfs_init();
acpi_sleep_proc_init();
acpi_wakeup_device_init();
acpi_debugger_init();
acpi_setup_sb_notify_handler();
acpi_viot_init();
return 0;
}
subsys_initcall(acpi_init);