linux-stable/drivers/media/dvb-frontends/rtl2832.c

983 lines
24 KiB
C
Raw Normal View History

/*
* Realtek RTL2832 DVB-T demodulator driver
*
* Copyright (C) 2012 Thomas Mair <thomas.mair86@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#include "rtl2832_priv.h"
#include "dvb_math.h"
#include <linux/bitops.h>
[media] dvb-frontends: Don't use dynamic static allocation Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/af9013.c:77:1: warning: 'af9013_wr_regs_i2c' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:188:1: warning: 'af9033_wr_reg_val_tab' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:68:1: warning: 'af9033_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/bcm3510.c:230:1: warning: 'bcm3510_do_hab_cmd' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/cxd2820r_core.c:84:1: warning: 'cxd2820r_rd_regs_i2c.isra.1' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2830.c:56:1: warning: 'rtl2830_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2832.c:187:1: warning: 'rtl2832_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:52:1: warning: 'tda10071_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:84:1: warning: 'tda10071_rd_regs' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-02 08:11:47 +00:00
/* Max transfer size done by I2C transfer functions */
#define MAX_XFER_SIZE 64
int rtl2832_debug;
module_param_named(debug, rtl2832_debug, int, 0644);
MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
#define REG_MASK(b) (BIT(b + 1) - 1)
static const struct rtl2832_reg_entry registers[] = {
[DVBT_SOFT_RST] = {0x1, 0x1, 2, 2},
[DVBT_IIC_REPEAT] = {0x1, 0x1, 3, 3},
[DVBT_TR_WAIT_MIN_8K] = {0x1, 0x88, 11, 2},
[DVBT_RSD_BER_FAIL_VAL] = {0x1, 0x8f, 15, 0},
[DVBT_EN_BK_TRK] = {0x1, 0xa6, 7, 7},
[DVBT_AD_EN_REG] = {0x0, 0x8, 7, 7},
[DVBT_AD_EN_REG1] = {0x0, 0x8, 6, 6},
[DVBT_EN_BBIN] = {0x1, 0xb1, 0, 0},
[DVBT_MGD_THD0] = {0x1, 0x95, 7, 0},
[DVBT_MGD_THD1] = {0x1, 0x96, 7, 0},
[DVBT_MGD_THD2] = {0x1, 0x97, 7, 0},
[DVBT_MGD_THD3] = {0x1, 0x98, 7, 0},
[DVBT_MGD_THD4] = {0x1, 0x99, 7, 0},
[DVBT_MGD_THD5] = {0x1, 0x9a, 7, 0},
[DVBT_MGD_THD6] = {0x1, 0x9b, 7, 0},
[DVBT_MGD_THD7] = {0x1, 0x9c, 7, 0},
[DVBT_EN_CACQ_NOTCH] = {0x1, 0x61, 4, 4},
[DVBT_AD_AV_REF] = {0x0, 0x9, 6, 0},
[DVBT_REG_PI] = {0x0, 0xa, 2, 0},
[DVBT_PIP_ON] = {0x0, 0x21, 3, 3},
[DVBT_SCALE1_B92] = {0x2, 0x92, 7, 0},
[DVBT_SCALE1_B93] = {0x2, 0x93, 7, 0},
[DVBT_SCALE1_BA7] = {0x2, 0xa7, 7, 0},
[DVBT_SCALE1_BA9] = {0x2, 0xa9, 7, 0},
[DVBT_SCALE1_BAA] = {0x2, 0xaa, 7, 0},
[DVBT_SCALE1_BAB] = {0x2, 0xab, 7, 0},
[DVBT_SCALE1_BAC] = {0x2, 0xac, 7, 0},
[DVBT_SCALE1_BB0] = {0x2, 0xb0, 7, 0},
[DVBT_SCALE1_BB1] = {0x2, 0xb1, 7, 0},
[DVBT_KB_P1] = {0x1, 0x64, 3, 1},
[DVBT_KB_P2] = {0x1, 0x64, 6, 4},
[DVBT_KB_P3] = {0x1, 0x65, 2, 0},
[DVBT_OPT_ADC_IQ] = {0x0, 0x6, 5, 4},
[DVBT_AD_AVI] = {0x0, 0x9, 1, 0},
[DVBT_AD_AVQ] = {0x0, 0x9, 3, 2},
[DVBT_K1_CR_STEP12] = {0x2, 0xad, 9, 4},
[DVBT_TRK_KS_P2] = {0x1, 0x6f, 2, 0},
[DVBT_TRK_KS_I2] = {0x1, 0x70, 5, 3},
[DVBT_TR_THD_SET2] = {0x1, 0x72, 3, 0},
[DVBT_TRK_KC_P2] = {0x1, 0x73, 5, 3},
[DVBT_TRK_KC_I2] = {0x1, 0x75, 2, 0},
[DVBT_CR_THD_SET2] = {0x1, 0x76, 7, 6},
[DVBT_PSET_IFFREQ] = {0x1, 0x19, 21, 0},
[DVBT_SPEC_INV] = {0x1, 0x15, 0, 0},
[DVBT_RSAMP_RATIO] = {0x1, 0x9f, 27, 2},
[DVBT_CFREQ_OFF_RATIO] = {0x1, 0x9d, 23, 4},
[DVBT_FSM_STAGE] = {0x3, 0x51, 6, 3},
[DVBT_RX_CONSTEL] = {0x3, 0x3c, 3, 2},
[DVBT_RX_HIER] = {0x3, 0x3c, 6, 4},
[DVBT_RX_C_RATE_LP] = {0x3, 0x3d, 2, 0},
[DVBT_RX_C_RATE_HP] = {0x3, 0x3d, 5, 3},
[DVBT_GI_IDX] = {0x3, 0x51, 1, 0},
[DVBT_FFT_MODE_IDX] = {0x3, 0x51, 2, 2},
[DVBT_RSD_BER_EST] = {0x3, 0x4e, 15, 0},
[DVBT_CE_EST_EVM] = {0x4, 0xc, 15, 0},
[DVBT_RF_AGC_VAL] = {0x3, 0x5b, 13, 0},
[DVBT_IF_AGC_VAL] = {0x3, 0x59, 13, 0},
[DVBT_DAGC_VAL] = {0x3, 0x5, 7, 0},
[DVBT_SFREQ_OFF] = {0x3, 0x18, 13, 0},
[DVBT_CFREQ_OFF] = {0x3, 0x5f, 17, 0},
[DVBT_POLAR_RF_AGC] = {0x0, 0xe, 1, 1},
[DVBT_POLAR_IF_AGC] = {0x0, 0xe, 0, 0},
[DVBT_AAGC_HOLD] = {0x1, 0x4, 5, 5},
[DVBT_EN_RF_AGC] = {0x1, 0x4, 6, 6},
[DVBT_EN_IF_AGC] = {0x1, 0x4, 7, 7},
[DVBT_IF_AGC_MIN] = {0x1, 0x8, 7, 0},
[DVBT_IF_AGC_MAX] = {0x1, 0x9, 7, 0},
[DVBT_RF_AGC_MIN] = {0x1, 0xa, 7, 0},
[DVBT_RF_AGC_MAX] = {0x1, 0xb, 7, 0},
[DVBT_IF_AGC_MAN] = {0x1, 0xc, 6, 6},
[DVBT_IF_AGC_MAN_VAL] = {0x1, 0xc, 13, 0},
[DVBT_RF_AGC_MAN] = {0x1, 0xe, 6, 6},
[DVBT_RF_AGC_MAN_VAL] = {0x1, 0xe, 13, 0},
[DVBT_DAGC_TRG_VAL] = {0x1, 0x12, 7, 0},
[DVBT_AGC_TARG_VAL_0] = {0x1, 0x2, 0, 0},
[DVBT_AGC_TARG_VAL_8_1] = {0x1, 0x3, 7, 0},
[DVBT_AAGC_LOOP_GAIN] = {0x1, 0xc7, 5, 1},
[DVBT_LOOP_GAIN2_3_0] = {0x1, 0x4, 4, 1},
[DVBT_LOOP_GAIN2_4] = {0x1, 0x5, 7, 7},
[DVBT_LOOP_GAIN3] = {0x1, 0xc8, 4, 0},
[DVBT_VTOP1] = {0x1, 0x6, 5, 0},
[DVBT_VTOP2] = {0x1, 0xc9, 5, 0},
[DVBT_VTOP3] = {0x1, 0xca, 5, 0},
[DVBT_KRF1] = {0x1, 0xcb, 7, 0},
[DVBT_KRF2] = {0x1, 0x7, 7, 0},
[DVBT_KRF3] = {0x1, 0xcd, 7, 0},
[DVBT_KRF4] = {0x1, 0xce, 7, 0},
[DVBT_EN_GI_PGA] = {0x1, 0xe5, 0, 0},
[DVBT_THD_LOCK_UP] = {0x1, 0xd9, 8, 0},
[DVBT_THD_LOCK_DW] = {0x1, 0xdb, 8, 0},
[DVBT_THD_UP1] = {0x1, 0xdd, 7, 0},
[DVBT_THD_DW1] = {0x1, 0xde, 7, 0},
[DVBT_INTER_CNT_LEN] = {0x1, 0xd8, 3, 0},
[DVBT_GI_PGA_STATE] = {0x1, 0xe6, 3, 3},
[DVBT_EN_AGC_PGA] = {0x1, 0xd7, 0, 0},
[DVBT_CKOUTPAR] = {0x1, 0x7b, 5, 5},
[DVBT_CKOUT_PWR] = {0x1, 0x7b, 6, 6},
[DVBT_SYNC_DUR] = {0x1, 0x7b, 7, 7},
[DVBT_ERR_DUR] = {0x1, 0x7c, 0, 0},
[DVBT_SYNC_LVL] = {0x1, 0x7c, 1, 1},
[DVBT_ERR_LVL] = {0x1, 0x7c, 2, 2},
[DVBT_VAL_LVL] = {0x1, 0x7c, 3, 3},
[DVBT_SERIAL] = {0x1, 0x7c, 4, 4},
[DVBT_SER_LSB] = {0x1, 0x7c, 5, 5},
[DVBT_CDIV_PH0] = {0x1, 0x7d, 3, 0},
[DVBT_CDIV_PH1] = {0x1, 0x7d, 7, 4},
[DVBT_MPEG_IO_OPT_2_2] = {0x0, 0x6, 7, 7},
[DVBT_MPEG_IO_OPT_1_0] = {0x0, 0x7, 7, 6},
[DVBT_CKOUTPAR_PIP] = {0x0, 0xb7, 4, 4},
[DVBT_CKOUT_PWR_PIP] = {0x0, 0xb7, 3, 3},
[DVBT_SYNC_LVL_PIP] = {0x0, 0xb7, 2, 2},
[DVBT_ERR_LVL_PIP] = {0x0, 0xb7, 1, 1},
[DVBT_VAL_LVL_PIP] = {0x0, 0xb7, 0, 0},
[DVBT_CKOUTPAR_PID] = {0x0, 0xb9, 4, 4},
[DVBT_CKOUT_PWR_PID] = {0x0, 0xb9, 3, 3},
[DVBT_SYNC_LVL_PID] = {0x0, 0xb9, 2, 2},
[DVBT_ERR_LVL_PID] = {0x0, 0xb9, 1, 1},
[DVBT_VAL_LVL_PID] = {0x0, 0xb9, 0, 0},
[DVBT_SM_PASS] = {0x1, 0x93, 11, 0},
[DVBT_AD7_SETTING] = {0x0, 0x11, 15, 0},
[DVBT_RSSI_R] = {0x3, 0x1, 6, 0},
[DVBT_ACI_DET_IND] = {0x3, 0x12, 0, 0},
[DVBT_REG_MON] = {0x0, 0xd, 1, 0},
[DVBT_REG_MONSEL] = {0x0, 0xd, 2, 2},
[DVBT_REG_GPE] = {0x0, 0xd, 7, 7},
[DVBT_REG_GPO] = {0x0, 0x10, 0, 0},
[DVBT_REG_4MSEL] = {0x0, 0x13, 0, 0},
};
/* write multiple hardware registers */
static int rtl2832_wr(struct rtl2832_priv *priv, u8 reg, u8 *val, int len)
{
int ret;
[media] dvb-frontends: Don't use dynamic static allocation Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/af9013.c:77:1: warning: 'af9013_wr_regs_i2c' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:188:1: warning: 'af9033_wr_reg_val_tab' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:68:1: warning: 'af9033_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/bcm3510.c:230:1: warning: 'bcm3510_do_hab_cmd' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/cxd2820r_core.c:84:1: warning: 'cxd2820r_rd_regs_i2c.isra.1' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2830.c:56:1: warning: 'rtl2830_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2832.c:187:1: warning: 'rtl2832_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:52:1: warning: 'tda10071_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:84:1: warning: 'tda10071_rd_regs' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-02 08:11:47 +00:00
u8 buf[MAX_XFER_SIZE];
struct i2c_msg msg[1] = {
{
.addr = priv->cfg.i2c_addr,
.flags = 0,
[media] dvb-frontends: Don't use dynamic static allocation Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/af9013.c:77:1: warning: 'af9013_wr_regs_i2c' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:188:1: warning: 'af9033_wr_reg_val_tab' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:68:1: warning: 'af9033_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/bcm3510.c:230:1: warning: 'bcm3510_do_hab_cmd' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/cxd2820r_core.c:84:1: warning: 'cxd2820r_rd_regs_i2c.isra.1' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2830.c:56:1: warning: 'rtl2830_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2832.c:187:1: warning: 'rtl2832_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:52:1: warning: 'tda10071_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:84:1: warning: 'tda10071_rd_regs' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-02 08:11:47 +00:00
.len = 1 + len,
.buf = buf,
}
};
[media] dvb-frontends: Don't use dynamic static allocation Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/af9013.c:77:1: warning: 'af9013_wr_regs_i2c' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:188:1: warning: 'af9033_wr_reg_val_tab' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:68:1: warning: 'af9033_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/bcm3510.c:230:1: warning: 'bcm3510_do_hab_cmd' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/cxd2820r_core.c:84:1: warning: 'cxd2820r_rd_regs_i2c.isra.1' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2830.c:56:1: warning: 'rtl2830_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2832.c:187:1: warning: 'rtl2832_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:52:1: warning: 'tda10071_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:84:1: warning: 'tda10071_rd_regs' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-02 08:11:47 +00:00
if (1 + len > sizeof(buf)) {
dev_warn(&priv->i2c->dev,
"%s: i2c wr reg=%04x: len=%d is too big!\n",
KBUILD_MODNAME, reg, len);
return -EINVAL;
}
buf[0] = reg;
memcpy(&buf[1], val, len);
ret = i2c_transfer(priv->i2c, msg, 1);
if (ret == 1) {
ret = 0;
} else {
dev_warn(&priv->i2c->dev, "%s: i2c wr failed=%d reg=%02x " \
"len=%d\n", KBUILD_MODNAME, ret, reg, len);
ret = -EREMOTEIO;
}
return ret;
}
/* read multiple hardware registers */
static int rtl2832_rd(struct rtl2832_priv *priv, u8 reg, u8 *val, int len)
{
int ret;
struct i2c_msg msg[2] = {
{
.addr = priv->cfg.i2c_addr,
.flags = 0,
.len = 1,
.buf = &reg,
}, {
.addr = priv->cfg.i2c_addr,
.flags = I2C_M_RD,
.len = len,
.buf = val,
}
};
ret = i2c_transfer(priv->i2c, msg, 2);
if (ret == 2) {
ret = 0;
} else {
dev_warn(&priv->i2c->dev, "%s: i2c rd failed=%d reg=%02x " \
"len=%d\n", KBUILD_MODNAME, ret, reg, len);
ret = -EREMOTEIO;
}
return ret;
}
/* write multiple registers */
static int rtl2832_wr_regs(struct rtl2832_priv *priv, u8 reg, u8 page, u8 *val,
int len)
{
int ret;
/* switch bank if needed */
if (page != priv->page) {
ret = rtl2832_wr(priv, 0x00, &page, 1);
if (ret)
return ret;
priv->page = page;
}
return rtl2832_wr(priv, reg, val, len);
}
/* read multiple registers */
static int rtl2832_rd_regs(struct rtl2832_priv *priv, u8 reg, u8 page, u8 *val,
int len)
{
int ret;
/* switch bank if needed */
if (page != priv->page) {
ret = rtl2832_wr(priv, 0x00, &page, 1);
if (ret)
return ret;
priv->page = page;
}
return rtl2832_rd(priv, reg, val, len);
}
#if 0 /* currently not used */
/* write single register */
static int rtl2832_wr_reg(struct rtl2832_priv *priv, u8 reg, u8 page, u8 val)
{
return rtl2832_wr_regs(priv, reg, page, &val, 1);
}
#endif
/* read single register */
static int rtl2832_rd_reg(struct rtl2832_priv *priv, u8 reg, u8 page, u8 *val)
{
return rtl2832_rd_regs(priv, reg, page, val, 1);
}
static int rtl2832_rd_demod_reg(struct rtl2832_priv *priv, int reg, u32 *val)
{
int ret;
u8 reg_start_addr;
u8 msb, lsb;
u8 page;
u8 reading[4];
u32 reading_tmp;
int i;
u8 len;
u32 mask;
reg_start_addr = registers[reg].start_address;
msb = registers[reg].msb;
lsb = registers[reg].lsb;
page = registers[reg].page;
len = (msb >> 3) + 1;
mask = REG_MASK(msb - lsb);
ret = rtl2832_rd_regs(priv, reg_start_addr, page, &reading[0], len);
if (ret)
goto err;
reading_tmp = 0;
for (i = 0; i < len; i++)
reading_tmp |= reading[i] << ((len - 1 - i) * 8);
*val = (reading_tmp >> lsb) & mask;
return ret;
err:
dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int rtl2832_wr_demod_reg(struct rtl2832_priv *priv, int reg, u32 val)
{
int ret, i;
u8 len;
u8 reg_start_addr;
u8 msb, lsb;
u8 page;
u32 mask;
u8 reading[4];
u8 writing[4];
u32 reading_tmp;
u32 writing_tmp;
reg_start_addr = registers[reg].start_address;
msb = registers[reg].msb;
lsb = registers[reg].lsb;
page = registers[reg].page;
len = (msb >> 3) + 1;
mask = REG_MASK(msb - lsb);
ret = rtl2832_rd_regs(priv, reg_start_addr, page, &reading[0], len);
if (ret)
goto err;
reading_tmp = 0;
for (i = 0; i < len; i++)
reading_tmp |= reading[i] << ((len - 1 - i) * 8);
writing_tmp = reading_tmp & ~(mask << lsb);
writing_tmp |= ((val & mask) << lsb);
for (i = 0; i < len; i++)
writing[i] = (writing_tmp >> ((len - 1 - i) * 8)) & 0xff;
ret = rtl2832_wr_regs(priv, reg_start_addr, page, &writing[0], len);
if (ret)
goto err;
return ret;
err:
dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int rtl2832_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
{
int ret;
struct rtl2832_priv *priv = fe->demodulator_priv;
dev_dbg(&priv->i2c->dev, "%s: enable=%d\n", __func__, enable);
/* gate already open or close */
if (priv->i2c_gate_state == enable)
return 0;
ret = rtl2832_wr_demod_reg(priv, DVBT_IIC_REPEAT, (enable ? 0x1 : 0x0));
if (ret)
goto err;
priv->i2c_gate_state = enable;
return ret;
err:
dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int rtl2832_set_if(struct dvb_frontend *fe, u32 if_freq)
{
struct rtl2832_priv *priv = fe->demodulator_priv;
int ret;
u64 pset_iffreq;
u8 en_bbin = (if_freq == 0 ? 0x1 : 0x0);
/*
* PSET_IFFREQ = - floor((IfFreqHz % CrystalFreqHz) * pow(2, 22)
* / CrystalFreqHz)
*/
pset_iffreq = if_freq % priv->cfg.xtal;
pset_iffreq *= 0x400000;
pset_iffreq = div_u64(pset_iffreq, priv->cfg.xtal);
pset_iffreq = -pset_iffreq;
pset_iffreq = pset_iffreq & 0x3fffff;
dev_dbg(&priv->i2c->dev, "%s: if_frequency=%d pset_iffreq=%08x\n",
__func__, if_freq, (unsigned)pset_iffreq);
ret = rtl2832_wr_demod_reg(priv, DVBT_EN_BBIN, en_bbin);
if (ret)
return ret;
ret = rtl2832_wr_demod_reg(priv, DVBT_PSET_IFFREQ, pset_iffreq);
return (ret);
}
static int rtl2832_init(struct dvb_frontend *fe)
{
struct rtl2832_priv *priv = fe->demodulator_priv;
const struct rtl2832_reg_value *init;
int i, ret, len;
/* initialization values for the demodulator registers */
struct rtl2832_reg_value rtl2832_initial_regs[] = {
{DVBT_AD_EN_REG, 0x1},
{DVBT_AD_EN_REG1, 0x1},
{DVBT_RSD_BER_FAIL_VAL, 0x2800},
{DVBT_MGD_THD0, 0x10},
{DVBT_MGD_THD1, 0x20},
{DVBT_MGD_THD2, 0x20},
{DVBT_MGD_THD3, 0x40},
{DVBT_MGD_THD4, 0x22},
{DVBT_MGD_THD5, 0x32},
{DVBT_MGD_THD6, 0x37},
{DVBT_MGD_THD7, 0x39},
{DVBT_EN_BK_TRK, 0x0},
{DVBT_EN_CACQ_NOTCH, 0x0},
{DVBT_AD_AV_REF, 0x2a},
{DVBT_REG_PI, 0x6},
{DVBT_PIP_ON, 0x0},
{DVBT_CDIV_PH0, 0x8},
{DVBT_CDIV_PH1, 0x8},
{DVBT_SCALE1_B92, 0x4},
{DVBT_SCALE1_B93, 0xb0},
{DVBT_SCALE1_BA7, 0x78},
{DVBT_SCALE1_BA9, 0x28},
{DVBT_SCALE1_BAA, 0x59},
{DVBT_SCALE1_BAB, 0x83},
{DVBT_SCALE1_BAC, 0xd4},
{DVBT_SCALE1_BB0, 0x65},
{DVBT_SCALE1_BB1, 0x43},
{DVBT_KB_P1, 0x1},
{DVBT_KB_P2, 0x4},
{DVBT_KB_P3, 0x7},
{DVBT_K1_CR_STEP12, 0xa},
{DVBT_REG_GPE, 0x1},
{DVBT_SERIAL, 0x0},
{DVBT_CDIV_PH0, 0x9},
{DVBT_CDIV_PH1, 0x9},
{DVBT_MPEG_IO_OPT_2_2, 0x0},
{DVBT_MPEG_IO_OPT_1_0, 0x0},
{DVBT_TRK_KS_P2, 0x4},
{DVBT_TRK_KS_I2, 0x7},
{DVBT_TR_THD_SET2, 0x6},
{DVBT_TRK_KC_I2, 0x5},
{DVBT_CR_THD_SET2, 0x1},
};
dev_dbg(&priv->i2c->dev, "%s:\n", __func__);
for (i = 0; i < ARRAY_SIZE(rtl2832_initial_regs); i++) {
ret = rtl2832_wr_demod_reg(priv, rtl2832_initial_regs[i].reg,
rtl2832_initial_regs[i].value);
if (ret)
goto err;
}
/* load tuner specific settings */
dev_dbg(&priv->i2c->dev, "%s: load settings for tuner=%02x\n",
__func__, priv->cfg.tuner);
switch (priv->cfg.tuner) {
case RTL2832_TUNER_FC0012:
case RTL2832_TUNER_FC0013:
len = ARRAY_SIZE(rtl2832_tuner_init_fc0012);
init = rtl2832_tuner_init_fc0012;
break;
case RTL2832_TUNER_TUA9001:
len = ARRAY_SIZE(rtl2832_tuner_init_tua9001);
init = rtl2832_tuner_init_tua9001;
break;
case RTL2832_TUNER_E4000:
len = ARRAY_SIZE(rtl2832_tuner_init_e4000);
init = rtl2832_tuner_init_e4000;
break;
case RTL2832_TUNER_R820T:
case RTL2832_TUNER_R828D:
len = ARRAY_SIZE(rtl2832_tuner_init_r820t);
init = rtl2832_tuner_init_r820t;
break;
default:
ret = -EINVAL;
goto err;
}
for (i = 0; i < len; i++) {
ret = rtl2832_wr_demod_reg(priv, init[i].reg, init[i].value);
if (ret)
goto err;
}
/*
* r820t NIM code does a software reset here at the demod -
* may not be needed, as there's already a software reset at set_params()
*/
#if 1
/* soft reset */
ret = rtl2832_wr_demod_reg(priv, DVBT_SOFT_RST, 0x1);
if (ret)
goto err;
ret = rtl2832_wr_demod_reg(priv, DVBT_SOFT_RST, 0x0);
if (ret)
goto err;
#endif
priv->sleeping = false;
return ret;
err:
dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int rtl2832_sleep(struct dvb_frontend *fe)
{
struct rtl2832_priv *priv = fe->demodulator_priv;
dev_dbg(&priv->i2c->dev, "%s:\n", __func__);
priv->sleeping = true;
return 0;
}
static int rtl2832_get_tune_settings(struct dvb_frontend *fe,
struct dvb_frontend_tune_settings *s)
{
struct rtl2832_priv *priv = fe->demodulator_priv;
dev_dbg(&priv->i2c->dev, "%s:\n", __func__);
s->min_delay_ms = 1000;
s->step_size = fe->ops.info.frequency_stepsize * 2;
s->max_drift = (fe->ops.info.frequency_stepsize * 2) + 1;
return 0;
}
static int rtl2832_set_frontend(struct dvb_frontend *fe)
{
struct rtl2832_priv *priv = fe->demodulator_priv;
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
int ret, i, j;
u64 bw_mode, num, num2;
u32 resamp_ratio, cfreq_off_ratio;
static u8 bw_params[3][32] = {
/* 6 MHz bandwidth */
{
0xf5, 0xff, 0x15, 0x38, 0x5d, 0x6d, 0x52, 0x07, 0xfa, 0x2f,
0x53, 0xf5, 0x3f, 0xca, 0x0b, 0x91, 0xea, 0x30, 0x63, 0xb2,
0x13, 0xda, 0x0b, 0xc4, 0x18, 0x7e, 0x16, 0x66, 0x08, 0x67,
0x19, 0xe0,
},
/* 7 MHz bandwidth */
{
0xe7, 0xcc, 0xb5, 0xba, 0xe8, 0x2f, 0x67, 0x61, 0x00, 0xaf,
0x86, 0xf2, 0xbf, 0x59, 0x04, 0x11, 0xb6, 0x33, 0xa4, 0x30,
0x15, 0x10, 0x0a, 0x42, 0x18, 0xf8, 0x17, 0xd9, 0x07, 0x22,
0x19, 0x10,
},
/* 8 MHz bandwidth */
{
0x09, 0xf6, 0xd2, 0xa7, 0x9a, 0xc9, 0x27, 0x77, 0x06, 0xbf,
0xec, 0xf4, 0x4f, 0x0b, 0xfc, 0x01, 0x63, 0x35, 0x54, 0xa7,
0x16, 0x66, 0x08, 0xb4, 0x19, 0x6e, 0x19, 0x65, 0x05, 0xc8,
0x19, 0xe0,
},
};
dev_dbg(&priv->i2c->dev, "%s: frequency=%d bandwidth_hz=%d " \
"inversion=%d\n", __func__, c->frequency,
c->bandwidth_hz, c->inversion);
/* program tuner */
if (fe->ops.tuner_ops.set_params)
fe->ops.tuner_ops.set_params(fe);
/* If the frontend has get_if_frequency(), use it */
if (fe->ops.tuner_ops.get_if_frequency) {
u32 if_freq;
ret = fe->ops.tuner_ops.get_if_frequency(fe, &if_freq);
if (ret)
goto err;
ret = rtl2832_set_if(fe, if_freq);
if (ret)
goto err;
}
switch (c->bandwidth_hz) {
case 6000000:
i = 0;
bw_mode = 48000000;
break;
case 7000000:
i = 1;
bw_mode = 56000000;
break;
case 8000000:
i = 2;
bw_mode = 64000000;
break;
default:
dev_dbg(&priv->i2c->dev, "%s: invalid bandwidth\n", __func__);
return -EINVAL;
}
for (j = 0; j < sizeof(bw_params[0]); j++) {
ret = rtl2832_wr_regs(priv, 0x1c+j, 1, &bw_params[i][j], 1);
if (ret)
goto err;
}
/* calculate and set resample ratio
* RSAMP_RATIO = floor(CrystalFreqHz * 7 * pow(2, 22)
* / ConstWithBandwidthMode)
*/
num = priv->cfg.xtal * 7;
num *= 0x400000;
num = div_u64(num, bw_mode);
resamp_ratio = num & 0x3ffffff;
ret = rtl2832_wr_demod_reg(priv, DVBT_RSAMP_RATIO, resamp_ratio);
if (ret)
goto err;
/* calculate and set cfreq off ratio
* CFREQ_OFF_RATIO = - floor(ConstWithBandwidthMode * pow(2, 20)
* / (CrystalFreqHz * 7))
*/
num = bw_mode << 20;
num2 = priv->cfg.xtal * 7;
num = div_u64(num, num2);
num = -num;
cfreq_off_ratio = num & 0xfffff;
ret = rtl2832_wr_demod_reg(priv, DVBT_CFREQ_OFF_RATIO, cfreq_off_ratio);
if (ret)
goto err;
/* soft reset */
ret = rtl2832_wr_demod_reg(priv, DVBT_SOFT_RST, 0x1);
if (ret)
goto err;
ret = rtl2832_wr_demod_reg(priv, DVBT_SOFT_RST, 0x0);
if (ret)
goto err;
return ret;
err:
dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int rtl2832_get_frontend(struct dvb_frontend *fe)
{
struct rtl2832_priv *priv = fe->demodulator_priv;
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
int ret;
u8 buf[3];
if (priv->sleeping)
return 0;
ret = rtl2832_rd_regs(priv, 0x3c, 3, buf, 2);
if (ret)
goto err;
ret = rtl2832_rd_reg(priv, 0x51, 3, &buf[2]);
if (ret)
goto err;
dev_dbg(&priv->i2c->dev, "%s: TPS=%*ph\n", __func__, 3, buf);
switch ((buf[0] >> 2) & 3) {
case 0:
c->modulation = QPSK;
break;
case 1:
c->modulation = QAM_16;
break;
case 2:
c->modulation = QAM_64;
break;
}
switch ((buf[2] >> 2) & 1) {
case 0:
c->transmission_mode = TRANSMISSION_MODE_2K;
break;
case 1:
c->transmission_mode = TRANSMISSION_MODE_8K;
}
switch ((buf[2] >> 0) & 3) {
case 0:
c->guard_interval = GUARD_INTERVAL_1_32;
break;
case 1:
c->guard_interval = GUARD_INTERVAL_1_16;
break;
case 2:
c->guard_interval = GUARD_INTERVAL_1_8;
break;
case 3:
c->guard_interval = GUARD_INTERVAL_1_4;
break;
}
switch ((buf[0] >> 4) & 7) {
case 0:
c->hierarchy = HIERARCHY_NONE;
break;
case 1:
c->hierarchy = HIERARCHY_1;
break;
case 2:
c->hierarchy = HIERARCHY_2;
break;
case 3:
c->hierarchy = HIERARCHY_4;
break;
}
switch ((buf[1] >> 3) & 7) {
case 0:
c->code_rate_HP = FEC_1_2;
break;
case 1:
c->code_rate_HP = FEC_2_3;
break;
case 2:
c->code_rate_HP = FEC_3_4;
break;
case 3:
c->code_rate_HP = FEC_5_6;
break;
case 4:
c->code_rate_HP = FEC_7_8;
break;
}
switch ((buf[1] >> 0) & 7) {
case 0:
c->code_rate_LP = FEC_1_2;
break;
case 1:
c->code_rate_LP = FEC_2_3;
break;
case 2:
c->code_rate_LP = FEC_3_4;
break;
case 3:
c->code_rate_LP = FEC_5_6;
break;
case 4:
c->code_rate_LP = FEC_7_8;
break;
}
return 0;
err:
dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int rtl2832_read_status(struct dvb_frontend *fe, fe_status_t *status)
{
struct rtl2832_priv *priv = fe->demodulator_priv;
int ret;
u32 tmp;
*status = 0;
dev_dbg(&priv->i2c->dev, "%s:\n", __func__);
if (priv->sleeping)
return 0;
ret = rtl2832_rd_demod_reg(priv, DVBT_FSM_STAGE, &tmp);
if (ret)
goto err;
if (tmp == 11) {
*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER |
FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
}
/* TODO find out if this is also true for rtl2832? */
/*else if (tmp == 10) {
*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER |
FE_HAS_VITERBI;
}*/
return ret;
err:
dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int rtl2832_read_snr(struct dvb_frontend *fe, u16 *snr)
{
struct rtl2832_priv *priv = fe->demodulator_priv;
int ret, hierarchy, constellation;
u8 buf[2], tmp;
u16 tmp16;
#define CONSTELLATION_NUM 3
#define HIERARCHY_NUM 4
static const u32 snr_constant[CONSTELLATION_NUM][HIERARCHY_NUM] = {
{ 85387325, 85387325, 85387325, 85387325 },
{ 86676178, 86676178, 87167949, 87795660 },
{ 87659938, 87659938, 87885178, 88241743 },
};
/* reports SNR in resolution of 0.1 dB */
ret = rtl2832_rd_reg(priv, 0x3c, 3, &tmp);
if (ret)
goto err;
constellation = (tmp >> 2) & 0x03; /* [3:2] */
if (constellation > CONSTELLATION_NUM - 1)
goto err;
hierarchy = (tmp >> 4) & 0x07; /* [6:4] */
if (hierarchy > HIERARCHY_NUM - 1)
goto err;
ret = rtl2832_rd_regs(priv, 0x0c, 4, buf, 2);
if (ret)
goto err;
tmp16 = buf[0] << 8 | buf[1];
if (tmp16)
*snr = (snr_constant[constellation][hierarchy] -
intlog10(tmp16)) / ((1 << 24) / 100);
else
*snr = 0;
return 0;
err:
dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int rtl2832_read_ber(struct dvb_frontend *fe, u32 *ber)
{
struct rtl2832_priv *priv = fe->demodulator_priv;
int ret;
u8 buf[2];
ret = rtl2832_rd_regs(priv, 0x4e, 3, buf, 2);
if (ret)
goto err;
*ber = buf[0] << 8 | buf[1];
return 0;
err:
dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static struct dvb_frontend_ops rtl2832_ops;
static void rtl2832_release(struct dvb_frontend *fe)
{
struct rtl2832_priv *priv = fe->demodulator_priv;
dev_dbg(&priv->i2c->dev, "%s:\n", __func__);
kfree(priv);
}
struct dvb_frontend *rtl2832_attach(const struct rtl2832_config *cfg,
struct i2c_adapter *i2c)
{
struct rtl2832_priv *priv = NULL;
int ret = 0;
u8 tmp;
dev_dbg(&i2c->dev, "%s:\n", __func__);
/* allocate memory for the internal state */
priv = kzalloc(sizeof(struct rtl2832_priv), GFP_KERNEL);
if (priv == NULL)
goto err;
/* setup the priv */
priv->i2c = i2c;
priv->tuner = cfg->tuner;
memcpy(&priv->cfg, cfg, sizeof(struct rtl2832_config));
/* check if the demod is there */
ret = rtl2832_rd_reg(priv, 0x00, 0x0, &tmp);
if (ret)
goto err;
/* create dvb_frontend */
memcpy(&priv->fe.ops, &rtl2832_ops, sizeof(struct dvb_frontend_ops));
priv->fe.demodulator_priv = priv;
/* TODO implement sleep mode */
priv->sleeping = true;
return &priv->fe;
err:
dev_dbg(&i2c->dev, "%s: failed=%d\n", __func__, ret);
kfree(priv);
return NULL;
}
EXPORT_SYMBOL(rtl2832_attach);
static struct dvb_frontend_ops rtl2832_ops = {
.delsys = { SYS_DVBT },
.info = {
.name = "Realtek RTL2832 (DVB-T)",
.frequency_min = 174000000,
.frequency_max = 862000000,
.frequency_stepsize = 166667,
.caps = FE_CAN_FEC_1_2 |
FE_CAN_FEC_2_3 |
FE_CAN_FEC_3_4 |
FE_CAN_FEC_5_6 |
FE_CAN_FEC_7_8 |
FE_CAN_FEC_AUTO |
FE_CAN_QPSK |
FE_CAN_QAM_16 |
FE_CAN_QAM_64 |
FE_CAN_QAM_AUTO |
FE_CAN_TRANSMISSION_MODE_AUTO |
FE_CAN_GUARD_INTERVAL_AUTO |
FE_CAN_HIERARCHY_AUTO |
FE_CAN_RECOVER |
FE_CAN_MUTE_TS
},
.release = rtl2832_release,
.init = rtl2832_init,
.sleep = rtl2832_sleep,
.get_tune_settings = rtl2832_get_tune_settings,
.set_frontend = rtl2832_set_frontend,
.get_frontend = rtl2832_get_frontend,
.read_status = rtl2832_read_status,
.read_snr = rtl2832_read_snr,
.read_ber = rtl2832_read_ber,
.i2c_gate_ctrl = rtl2832_i2c_gate_ctrl,
};
MODULE_AUTHOR("Thomas Mair <mair.thomas86@gmail.com>");
MODULE_DESCRIPTION("Realtek RTL2832 DVB-T demodulator driver");
MODULE_LICENSE("GPL");
MODULE_VERSION("0.5");