tc: Add support for configuring the taprio scheduler
This traffic scheduler allows traffic classes states (transmission
allowed/not allowed, in the simplest case) to be scheduled, according
to a pre-generated time sequence. This is the basis of the IEEE
802.1Qbv specification.
Example configuration:
tc qdisc replace dev enp3s0 parent root handle 100 taprio \
num_tc 3 \
map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \
queues 1@0 1@1 2@2 \
base-time 1528743495910289987 \
sched-entry S 01 300000 \
sched-entry S 02 300000 \
sched-entry S 04 300000 \
clockid CLOCK_TAI
The configuration format is similar to mqprio. The main difference is
the presence of a schedule, built by multiple "sched-entry"
definitions, each entry has the following format:
sched-entry <CMD> <GATE MASK> <INTERVAL>
The only supported <CMD> is "S", which means "SetGateStates",
following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK>
is a bitmask where each bit is a associated with a traffic class, so
bit 0 (the least significant bit) being "on" means that traffic class
0 is "active" for that schedule entry. <INTERVAL> is a time duration
in nanoseconds that specifies for how long that state defined by <CMD>
and <GATE MASK> should be held before moving to the next entry.
This schedule is circular, that is, after the last entry is executed
it starts from the first one, indefinitely.
The other parameters can be defined as follows:
- base-time: specifies the instant when the schedule starts, if
'base-time' is a time in the past, the schedule will start at
base-time + (N * cycle-time)
where N is the smallest integer so the resulting time is greater
than "now", and "cycle-time" is the sum of all the intervals of the
entries in the schedule;
- clockid: specifies the reference clock to be used;
The parameters should be similar to what the IEEE 802.1Q family of
specification defines.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 00:59:43 +00:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
|
|
|
|
|
|
|
/* net/sched/sch_taprio.c Time Aware Priority Scheduler
|
|
|
|
*
|
|
|
|
* Authors: Vinicius Costa Gomes <vinicius.gomes@intel.com>
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/types.h>
|
|
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/string.h>
|
|
|
|
#include <linux/list.h>
|
|
|
|
#include <linux/errno.h>
|
|
|
|
#include <linux/skbuff.h>
|
2019-04-17 20:51:57 +00:00
|
|
|
#include <linux/math64.h>
|
tc: Add support for configuring the taprio scheduler
This traffic scheduler allows traffic classes states (transmission
allowed/not allowed, in the simplest case) to be scheduled, according
to a pre-generated time sequence. This is the basis of the IEEE
802.1Qbv specification.
Example configuration:
tc qdisc replace dev enp3s0 parent root handle 100 taprio \
num_tc 3 \
map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \
queues 1@0 1@1 2@2 \
base-time 1528743495910289987 \
sched-entry S 01 300000 \
sched-entry S 02 300000 \
sched-entry S 04 300000 \
clockid CLOCK_TAI
The configuration format is similar to mqprio. The main difference is
the presence of a schedule, built by multiple "sched-entry"
definitions, each entry has the following format:
sched-entry <CMD> <GATE MASK> <INTERVAL>
The only supported <CMD> is "S", which means "SetGateStates",
following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK>
is a bitmask where each bit is a associated with a traffic class, so
bit 0 (the least significant bit) being "on" means that traffic class
0 is "active" for that schedule entry. <INTERVAL> is a time duration
in nanoseconds that specifies for how long that state defined by <CMD>
and <GATE MASK> should be held before moving to the next entry.
This schedule is circular, that is, after the last entry is executed
it starts from the first one, indefinitely.
The other parameters can be defined as follows:
- base-time: specifies the instant when the schedule starts, if
'base-time' is a time in the past, the schedule will start at
base-time + (N * cycle-time)
where N is the smallest integer so the resulting time is greater
than "now", and "cycle-time" is the sum of all the intervals of the
entries in the schedule;
- clockid: specifies the reference clock to be used;
The parameters should be similar to what the IEEE 802.1Q family of
specification defines.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 00:59:43 +00:00
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/spinlock.h>
|
|
|
|
#include <net/netlink.h>
|
|
|
|
#include <net/pkt_sched.h>
|
|
|
|
#include <net/pkt_cls.h>
|
|
|
|
#include <net/sch_generic.h>
|
|
|
|
|
2019-04-08 17:12:17 +00:00
|
|
|
static LIST_HEAD(taprio_list);
|
|
|
|
static DEFINE_SPINLOCK(taprio_list_lock);
|
|
|
|
|
tc: Add support for configuring the taprio scheduler
This traffic scheduler allows traffic classes states (transmission
allowed/not allowed, in the simplest case) to be scheduled, according
to a pre-generated time sequence. This is the basis of the IEEE
802.1Qbv specification.
Example configuration:
tc qdisc replace dev enp3s0 parent root handle 100 taprio \
num_tc 3 \
map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \
queues 1@0 1@1 2@2 \
base-time 1528743495910289987 \
sched-entry S 01 300000 \
sched-entry S 02 300000 \
sched-entry S 04 300000 \
clockid CLOCK_TAI
The configuration format is similar to mqprio. The main difference is
the presence of a schedule, built by multiple "sched-entry"
definitions, each entry has the following format:
sched-entry <CMD> <GATE MASK> <INTERVAL>
The only supported <CMD> is "S", which means "SetGateStates",
following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK>
is a bitmask where each bit is a associated with a traffic class, so
bit 0 (the least significant bit) being "on" means that traffic class
0 is "active" for that schedule entry. <INTERVAL> is a time duration
in nanoseconds that specifies for how long that state defined by <CMD>
and <GATE MASK> should be held before moving to the next entry.
This schedule is circular, that is, after the last entry is executed
it starts from the first one, indefinitely.
The other parameters can be defined as follows:
- base-time: specifies the instant when the schedule starts, if
'base-time' is a time in the past, the schedule will start at
base-time + (N * cycle-time)
where N is the smallest integer so the resulting time is greater
than "now", and "cycle-time" is the sum of all the intervals of the
entries in the schedule;
- clockid: specifies the reference clock to be used;
The parameters should be similar to what the IEEE 802.1Q family of
specification defines.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 00:59:43 +00:00
|
|
|
#define TAPRIO_ALL_GATES_OPEN -1
|
|
|
|
|
|
|
|
struct sched_entry {
|
|
|
|
struct list_head list;
|
|
|
|
|
|
|
|
/* The instant that this entry "closes" and the next one
|
|
|
|
* should open, the qdisc will make some effort so that no
|
|
|
|
* packet leaves after this time.
|
|
|
|
*/
|
|
|
|
ktime_t close_time;
|
|
|
|
atomic_t budget;
|
|
|
|
int index;
|
|
|
|
u32 gate_mask;
|
|
|
|
u32 interval;
|
|
|
|
u8 command;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct taprio_sched {
|
|
|
|
struct Qdisc **qdiscs;
|
|
|
|
struct Qdisc *root;
|
|
|
|
s64 base_time;
|
|
|
|
int clockid;
|
2019-04-08 17:12:17 +00:00
|
|
|
atomic64_t picos_per_byte; /* Using picoseconds because for 10Gbps+
|
|
|
|
* speeds it's sub-nanoseconds per byte
|
|
|
|
*/
|
tc: Add support for configuring the taprio scheduler
This traffic scheduler allows traffic classes states (transmission
allowed/not allowed, in the simplest case) to be scheduled, according
to a pre-generated time sequence. This is the basis of the IEEE
802.1Qbv specification.
Example configuration:
tc qdisc replace dev enp3s0 parent root handle 100 taprio \
num_tc 3 \
map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \
queues 1@0 1@1 2@2 \
base-time 1528743495910289987 \
sched-entry S 01 300000 \
sched-entry S 02 300000 \
sched-entry S 04 300000 \
clockid CLOCK_TAI
The configuration format is similar to mqprio. The main difference is
the presence of a schedule, built by multiple "sched-entry"
definitions, each entry has the following format:
sched-entry <CMD> <GATE MASK> <INTERVAL>
The only supported <CMD> is "S", which means "SetGateStates",
following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK>
is a bitmask where each bit is a associated with a traffic class, so
bit 0 (the least significant bit) being "on" means that traffic class
0 is "active" for that schedule entry. <INTERVAL> is a time duration
in nanoseconds that specifies for how long that state defined by <CMD>
and <GATE MASK> should be held before moving to the next entry.
This schedule is circular, that is, after the last entry is executed
it starts from the first one, indefinitely.
The other parameters can be defined as follows:
- base-time: specifies the instant when the schedule starts, if
'base-time' is a time in the past, the schedule will start at
base-time + (N * cycle-time)
where N is the smallest integer so the resulting time is greater
than "now", and "cycle-time" is the sum of all the intervals of the
entries in the schedule;
- clockid: specifies the reference clock to be used;
The parameters should be similar to what the IEEE 802.1Q family of
specification defines.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 00:59:43 +00:00
|
|
|
size_t num_entries;
|
|
|
|
|
|
|
|
/* Protects the update side of the RCU protected current_entry */
|
|
|
|
spinlock_t current_entry_lock;
|
|
|
|
struct sched_entry __rcu *current_entry;
|
|
|
|
struct list_head entries;
|
|
|
|
ktime_t (*get_time)(void);
|
|
|
|
struct hrtimer advance_timer;
|
2019-04-08 17:12:17 +00:00
|
|
|
struct list_head taprio_list;
|
tc: Add support for configuring the taprio scheduler
This traffic scheduler allows traffic classes states (transmission
allowed/not allowed, in the simplest case) to be scheduled, according
to a pre-generated time sequence. This is the basis of the IEEE
802.1Qbv specification.
Example configuration:
tc qdisc replace dev enp3s0 parent root handle 100 taprio \
num_tc 3 \
map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \
queues 1@0 1@1 2@2 \
base-time 1528743495910289987 \
sched-entry S 01 300000 \
sched-entry S 02 300000 \
sched-entry S 04 300000 \
clockid CLOCK_TAI
The configuration format is similar to mqprio. The main difference is
the presence of a schedule, built by multiple "sched-entry"
definitions, each entry has the following format:
sched-entry <CMD> <GATE MASK> <INTERVAL>
The only supported <CMD> is "S", which means "SetGateStates",
following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK>
is a bitmask where each bit is a associated with a traffic class, so
bit 0 (the least significant bit) being "on" means that traffic class
0 is "active" for that schedule entry. <INTERVAL> is a time duration
in nanoseconds that specifies for how long that state defined by <CMD>
and <GATE MASK> should be held before moving to the next entry.
This schedule is circular, that is, after the last entry is executed
it starts from the first one, indefinitely.
The other parameters can be defined as follows:
- base-time: specifies the instant when the schedule starts, if
'base-time' is a time in the past, the schedule will start at
base-time + (N * cycle-time)
where N is the smallest integer so the resulting time is greater
than "now", and "cycle-time" is the sum of all the intervals of the
entries in the schedule;
- clockid: specifies the reference clock to be used;
The parameters should be similar to what the IEEE 802.1Q family of
specification defines.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 00:59:43 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
static int taprio_enqueue(struct sk_buff *skb, struct Qdisc *sch,
|
|
|
|
struct sk_buff **to_free)
|
|
|
|
{
|
|
|
|
struct taprio_sched *q = qdisc_priv(sch);
|
|
|
|
struct Qdisc *child;
|
|
|
|
int queue;
|
|
|
|
|
|
|
|
queue = skb_get_queue_mapping(skb);
|
|
|
|
|
|
|
|
child = q->qdiscs[queue];
|
|
|
|
if (unlikely(!child))
|
|
|
|
return qdisc_drop(skb, sch, to_free);
|
|
|
|
|
|
|
|
qdisc_qstats_backlog_inc(sch, skb);
|
|
|
|
sch->q.qlen++;
|
|
|
|
|
|
|
|
return qdisc_enqueue(skb, child, to_free);
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct sk_buff *taprio_peek(struct Qdisc *sch)
|
|
|
|
{
|
|
|
|
struct taprio_sched *q = qdisc_priv(sch);
|
|
|
|
struct net_device *dev = qdisc_dev(sch);
|
|
|
|
struct sched_entry *entry;
|
|
|
|
struct sk_buff *skb;
|
|
|
|
u32 gate_mask;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
rcu_read_lock();
|
|
|
|
entry = rcu_dereference(q->current_entry);
|
|
|
|
gate_mask = entry ? entry->gate_mask : -1;
|
|
|
|
rcu_read_unlock();
|
|
|
|
|
|
|
|
if (!gate_mask)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
for (i = 0; i < dev->num_tx_queues; i++) {
|
|
|
|
struct Qdisc *child = q->qdiscs[i];
|
|
|
|
int prio;
|
|
|
|
u8 tc;
|
|
|
|
|
|
|
|
if (unlikely(!child))
|
|
|
|
continue;
|
|
|
|
|
|
|
|
skb = child->ops->peek(child);
|
|
|
|
if (!skb)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
prio = skb->priority;
|
|
|
|
tc = netdev_get_prio_tc_map(dev, prio);
|
|
|
|
|
|
|
|
if (!(gate_mask & BIT(tc)))
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
return skb;
|
|
|
|
}
|
|
|
|
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int length_to_duration(struct taprio_sched *q, int len)
|
|
|
|
{
|
2019-04-17 20:51:57 +00:00
|
|
|
return div_u64(len * atomic64_read(&q->picos_per_byte), 1000);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void taprio_set_budget(struct taprio_sched *q, struct sched_entry *entry)
|
|
|
|
{
|
|
|
|
atomic_set(&entry->budget,
|
|
|
|
div64_u64((u64)entry->interval * 1000,
|
|
|
|
atomic64_read(&q->picos_per_byte)));
|
tc: Add support for configuring the taprio scheduler
This traffic scheduler allows traffic classes states (transmission
allowed/not allowed, in the simplest case) to be scheduled, according
to a pre-generated time sequence. This is the basis of the IEEE
802.1Qbv specification.
Example configuration:
tc qdisc replace dev enp3s0 parent root handle 100 taprio \
num_tc 3 \
map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \
queues 1@0 1@1 2@2 \
base-time 1528743495910289987 \
sched-entry S 01 300000 \
sched-entry S 02 300000 \
sched-entry S 04 300000 \
clockid CLOCK_TAI
The configuration format is similar to mqprio. The main difference is
the presence of a schedule, built by multiple "sched-entry"
definitions, each entry has the following format:
sched-entry <CMD> <GATE MASK> <INTERVAL>
The only supported <CMD> is "S", which means "SetGateStates",
following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK>
is a bitmask where each bit is a associated with a traffic class, so
bit 0 (the least significant bit) being "on" means that traffic class
0 is "active" for that schedule entry. <INTERVAL> is a time duration
in nanoseconds that specifies for how long that state defined by <CMD>
and <GATE MASK> should be held before moving to the next entry.
This schedule is circular, that is, after the last entry is executed
it starts from the first one, indefinitely.
The other parameters can be defined as follows:
- base-time: specifies the instant when the schedule starts, if
'base-time' is a time in the past, the schedule will start at
base-time + (N * cycle-time)
where N is the smallest integer so the resulting time is greater
than "now", and "cycle-time" is the sum of all the intervals of the
entries in the schedule;
- clockid: specifies the reference clock to be used;
The parameters should be similar to what the IEEE 802.1Q family of
specification defines.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 00:59:43 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static struct sk_buff *taprio_dequeue(struct Qdisc *sch)
|
|
|
|
{
|
|
|
|
struct taprio_sched *q = qdisc_priv(sch);
|
|
|
|
struct net_device *dev = qdisc_dev(sch);
|
|
|
|
struct sched_entry *entry;
|
|
|
|
struct sk_buff *skb;
|
|
|
|
u32 gate_mask;
|
|
|
|
int i;
|
|
|
|
|
2019-04-08 17:12:17 +00:00
|
|
|
if (atomic64_read(&q->picos_per_byte) == -1) {
|
|
|
|
WARN_ONCE(1, "taprio: dequeue() called with unknown picos per byte.");
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
tc: Add support for configuring the taprio scheduler
This traffic scheduler allows traffic classes states (transmission
allowed/not allowed, in the simplest case) to be scheduled, according
to a pre-generated time sequence. This is the basis of the IEEE
802.1Qbv specification.
Example configuration:
tc qdisc replace dev enp3s0 parent root handle 100 taprio \
num_tc 3 \
map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \
queues 1@0 1@1 2@2 \
base-time 1528743495910289987 \
sched-entry S 01 300000 \
sched-entry S 02 300000 \
sched-entry S 04 300000 \
clockid CLOCK_TAI
The configuration format is similar to mqprio. The main difference is
the presence of a schedule, built by multiple "sched-entry"
definitions, each entry has the following format:
sched-entry <CMD> <GATE MASK> <INTERVAL>
The only supported <CMD> is "S", which means "SetGateStates",
following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK>
is a bitmask where each bit is a associated with a traffic class, so
bit 0 (the least significant bit) being "on" means that traffic class
0 is "active" for that schedule entry. <INTERVAL> is a time duration
in nanoseconds that specifies for how long that state defined by <CMD>
and <GATE MASK> should be held before moving to the next entry.
This schedule is circular, that is, after the last entry is executed
it starts from the first one, indefinitely.
The other parameters can be defined as follows:
- base-time: specifies the instant when the schedule starts, if
'base-time' is a time in the past, the schedule will start at
base-time + (N * cycle-time)
where N is the smallest integer so the resulting time is greater
than "now", and "cycle-time" is the sum of all the intervals of the
entries in the schedule;
- clockid: specifies the reference clock to be used;
The parameters should be similar to what the IEEE 802.1Q family of
specification defines.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 00:59:43 +00:00
|
|
|
rcu_read_lock();
|
|
|
|
entry = rcu_dereference(q->current_entry);
|
|
|
|
/* if there's no entry, it means that the schedule didn't
|
|
|
|
* start yet, so force all gates to be open, this is in
|
|
|
|
* accordance to IEEE 802.1Qbv-2015 Section 8.6.9.4.5
|
|
|
|
* "AdminGateSates"
|
|
|
|
*/
|
|
|
|
gate_mask = entry ? entry->gate_mask : TAPRIO_ALL_GATES_OPEN;
|
|
|
|
rcu_read_unlock();
|
|
|
|
|
|
|
|
if (!gate_mask)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
for (i = 0; i < dev->num_tx_queues; i++) {
|
|
|
|
struct Qdisc *child = q->qdiscs[i];
|
|
|
|
ktime_t guard;
|
|
|
|
int prio;
|
|
|
|
int len;
|
|
|
|
u8 tc;
|
|
|
|
|
|
|
|
if (unlikely(!child))
|
|
|
|
continue;
|
|
|
|
|
|
|
|
skb = child->ops->peek(child);
|
|
|
|
if (!skb)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
prio = skb->priority;
|
|
|
|
tc = netdev_get_prio_tc_map(dev, prio);
|
|
|
|
|
|
|
|
if (!(gate_mask & BIT(tc)))
|
|
|
|
continue;
|
|
|
|
|
|
|
|
len = qdisc_pkt_len(skb);
|
|
|
|
guard = ktime_add_ns(q->get_time(),
|
|
|
|
length_to_duration(q, len));
|
|
|
|
|
|
|
|
/* In the case that there's no gate entry, there's no
|
|
|
|
* guard band ...
|
|
|
|
*/
|
|
|
|
if (gate_mask != TAPRIO_ALL_GATES_OPEN &&
|
|
|
|
ktime_after(guard, entry->close_time))
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
/* ... and no budget. */
|
|
|
|
if (gate_mask != TAPRIO_ALL_GATES_OPEN &&
|
|
|
|
atomic_sub_return(len, &entry->budget) < 0)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
skb = child->ops->dequeue(child);
|
|
|
|
if (unlikely(!skb))
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
qdisc_bstats_update(sch, skb);
|
|
|
|
qdisc_qstats_backlog_dec(sch, skb);
|
|
|
|
sch->q.qlen--;
|
|
|
|
|
|
|
|
return skb;
|
|
|
|
}
|
|
|
|
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
static bool should_restart_cycle(const struct taprio_sched *q,
|
|
|
|
const struct sched_entry *entry)
|
|
|
|
{
|
|
|
|
WARN_ON(!entry);
|
|
|
|
|
|
|
|
return list_is_last(&entry->list, &q->entries);
|
|
|
|
}
|
|
|
|
|
|
|
|
static enum hrtimer_restart advance_sched(struct hrtimer *timer)
|
|
|
|
{
|
|
|
|
struct taprio_sched *q = container_of(timer, struct taprio_sched,
|
|
|
|
advance_timer);
|
|
|
|
struct sched_entry *entry, *next;
|
|
|
|
struct Qdisc *sch = q->root;
|
|
|
|
ktime_t close_time;
|
|
|
|
|
|
|
|
spin_lock(&q->current_entry_lock);
|
|
|
|
entry = rcu_dereference_protected(q->current_entry,
|
|
|
|
lockdep_is_held(&q->current_entry_lock));
|
|
|
|
|
|
|
|
/* This is the case that it's the first time that the schedule
|
|
|
|
* runs, so it only happens once per schedule. The first entry
|
|
|
|
* is pre-calculated during the schedule initialization.
|
|
|
|
*/
|
|
|
|
if (unlikely(!entry)) {
|
|
|
|
next = list_first_entry(&q->entries, struct sched_entry,
|
|
|
|
list);
|
|
|
|
close_time = next->close_time;
|
|
|
|
goto first_run;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (should_restart_cycle(q, entry))
|
|
|
|
next = list_first_entry(&q->entries, struct sched_entry,
|
|
|
|
list);
|
|
|
|
else
|
|
|
|
next = list_next_entry(entry, list);
|
|
|
|
|
|
|
|
close_time = ktime_add_ns(entry->close_time, next->interval);
|
|
|
|
|
|
|
|
next->close_time = close_time;
|
2019-04-17 20:51:57 +00:00
|
|
|
taprio_set_budget(q, next);
|
tc: Add support for configuring the taprio scheduler
This traffic scheduler allows traffic classes states (transmission
allowed/not allowed, in the simplest case) to be scheduled, according
to a pre-generated time sequence. This is the basis of the IEEE
802.1Qbv specification.
Example configuration:
tc qdisc replace dev enp3s0 parent root handle 100 taprio \
num_tc 3 \
map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \
queues 1@0 1@1 2@2 \
base-time 1528743495910289987 \
sched-entry S 01 300000 \
sched-entry S 02 300000 \
sched-entry S 04 300000 \
clockid CLOCK_TAI
The configuration format is similar to mqprio. The main difference is
the presence of a schedule, built by multiple "sched-entry"
definitions, each entry has the following format:
sched-entry <CMD> <GATE MASK> <INTERVAL>
The only supported <CMD> is "S", which means "SetGateStates",
following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK>
is a bitmask where each bit is a associated with a traffic class, so
bit 0 (the least significant bit) being "on" means that traffic class
0 is "active" for that schedule entry. <INTERVAL> is a time duration
in nanoseconds that specifies for how long that state defined by <CMD>
and <GATE MASK> should be held before moving to the next entry.
This schedule is circular, that is, after the last entry is executed
it starts from the first one, indefinitely.
The other parameters can be defined as follows:
- base-time: specifies the instant when the schedule starts, if
'base-time' is a time in the past, the schedule will start at
base-time + (N * cycle-time)
where N is the smallest integer so the resulting time is greater
than "now", and "cycle-time" is the sum of all the intervals of the
entries in the schedule;
- clockid: specifies the reference clock to be used;
The parameters should be similar to what the IEEE 802.1Q family of
specification defines.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 00:59:43 +00:00
|
|
|
|
|
|
|
first_run:
|
|
|
|
rcu_assign_pointer(q->current_entry, next);
|
|
|
|
spin_unlock(&q->current_entry_lock);
|
|
|
|
|
|
|
|
hrtimer_set_expires(&q->advance_timer, close_time);
|
|
|
|
|
|
|
|
rcu_read_lock();
|
|
|
|
__netif_schedule(sch);
|
|
|
|
rcu_read_unlock();
|
|
|
|
|
|
|
|
return HRTIMER_RESTART;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct nla_policy entry_policy[TCA_TAPRIO_SCHED_ENTRY_MAX + 1] = {
|
|
|
|
[TCA_TAPRIO_SCHED_ENTRY_INDEX] = { .type = NLA_U32 },
|
|
|
|
[TCA_TAPRIO_SCHED_ENTRY_CMD] = { .type = NLA_U8 },
|
|
|
|
[TCA_TAPRIO_SCHED_ENTRY_GATE_MASK] = { .type = NLA_U32 },
|
|
|
|
[TCA_TAPRIO_SCHED_ENTRY_INTERVAL] = { .type = NLA_U32 },
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct nla_policy entry_list_policy[TCA_TAPRIO_SCHED_MAX + 1] = {
|
|
|
|
[TCA_TAPRIO_SCHED_ENTRY] = { .type = NLA_NESTED },
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct nla_policy taprio_policy[TCA_TAPRIO_ATTR_MAX + 1] = {
|
|
|
|
[TCA_TAPRIO_ATTR_PRIOMAP] = {
|
|
|
|
.len = sizeof(struct tc_mqprio_qopt)
|
|
|
|
},
|
|
|
|
[TCA_TAPRIO_ATTR_SCHED_ENTRY_LIST] = { .type = NLA_NESTED },
|
|
|
|
[TCA_TAPRIO_ATTR_SCHED_BASE_TIME] = { .type = NLA_S64 },
|
|
|
|
[TCA_TAPRIO_ATTR_SCHED_SINGLE_ENTRY] = { .type = NLA_NESTED },
|
|
|
|
[TCA_TAPRIO_ATTR_SCHED_CLOCKID] = { .type = NLA_S32 },
|
|
|
|
};
|
|
|
|
|
|
|
|
static int fill_sched_entry(struct nlattr **tb, struct sched_entry *entry,
|
|
|
|
struct netlink_ext_ack *extack)
|
|
|
|
{
|
|
|
|
u32 interval = 0;
|
|
|
|
|
|
|
|
if (tb[TCA_TAPRIO_SCHED_ENTRY_CMD])
|
|
|
|
entry->command = nla_get_u8(
|
|
|
|
tb[TCA_TAPRIO_SCHED_ENTRY_CMD]);
|
|
|
|
|
|
|
|
if (tb[TCA_TAPRIO_SCHED_ENTRY_GATE_MASK])
|
|
|
|
entry->gate_mask = nla_get_u32(
|
|
|
|
tb[TCA_TAPRIO_SCHED_ENTRY_GATE_MASK]);
|
|
|
|
|
|
|
|
if (tb[TCA_TAPRIO_SCHED_ENTRY_INTERVAL])
|
|
|
|
interval = nla_get_u32(
|
|
|
|
tb[TCA_TAPRIO_SCHED_ENTRY_INTERVAL]);
|
|
|
|
|
|
|
|
if (interval == 0) {
|
|
|
|
NL_SET_ERR_MSG(extack, "Invalid interval for schedule entry");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
entry->interval = interval;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int parse_sched_entry(struct nlattr *n, struct sched_entry *entry,
|
|
|
|
int index, struct netlink_ext_ack *extack)
|
|
|
|
{
|
|
|
|
struct nlattr *tb[TCA_TAPRIO_SCHED_ENTRY_MAX + 1] = { };
|
|
|
|
int err;
|
|
|
|
|
|
|
|
err = nla_parse_nested(tb, TCA_TAPRIO_SCHED_ENTRY_MAX, n,
|
|
|
|
entry_policy, NULL);
|
|
|
|
if (err < 0) {
|
|
|
|
NL_SET_ERR_MSG(extack, "Could not parse nested entry");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
entry->index = index;
|
|
|
|
|
|
|
|
return fill_sched_entry(tb, entry, extack);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Returns the number of entries in case of success */
|
|
|
|
static int parse_sched_single_entry(struct nlattr *n,
|
|
|
|
struct taprio_sched *q,
|
|
|
|
struct netlink_ext_ack *extack)
|
|
|
|
{
|
|
|
|
struct nlattr *tb_entry[TCA_TAPRIO_SCHED_ENTRY_MAX + 1] = { };
|
|
|
|
struct nlattr *tb_list[TCA_TAPRIO_SCHED_MAX + 1] = { };
|
|
|
|
struct sched_entry *entry;
|
|
|
|
bool found = false;
|
|
|
|
u32 index;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
err = nla_parse_nested(tb_list, TCA_TAPRIO_SCHED_MAX,
|
|
|
|
n, entry_list_policy, NULL);
|
|
|
|
if (err < 0) {
|
|
|
|
NL_SET_ERR_MSG(extack, "Could not parse nested entry");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!tb_list[TCA_TAPRIO_SCHED_ENTRY]) {
|
|
|
|
NL_SET_ERR_MSG(extack, "Single-entry must include an entry");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
err = nla_parse_nested(tb_entry, TCA_TAPRIO_SCHED_ENTRY_MAX,
|
|
|
|
tb_list[TCA_TAPRIO_SCHED_ENTRY],
|
|
|
|
entry_policy, NULL);
|
|
|
|
if (err < 0) {
|
|
|
|
NL_SET_ERR_MSG(extack, "Could not parse nested entry");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!tb_entry[TCA_TAPRIO_SCHED_ENTRY_INDEX]) {
|
|
|
|
NL_SET_ERR_MSG(extack, "Entry must specify an index\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
index = nla_get_u32(tb_entry[TCA_TAPRIO_SCHED_ENTRY_INDEX]);
|
|
|
|
if (index >= q->num_entries) {
|
|
|
|
NL_SET_ERR_MSG(extack, "Index for single entry exceeds number of entries in schedule");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
list_for_each_entry(entry, &q->entries, list) {
|
|
|
|
if (entry->index == index) {
|
|
|
|
found = true;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!found) {
|
|
|
|
NL_SET_ERR_MSG(extack, "Could not find entry");
|
|
|
|
return -ENOENT;
|
|
|
|
}
|
|
|
|
|
|
|
|
err = fill_sched_entry(tb_entry, entry, extack);
|
|
|
|
if (err < 0)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
return q->num_entries;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int parse_sched_list(struct nlattr *list,
|
|
|
|
struct taprio_sched *q,
|
|
|
|
struct netlink_ext_ack *extack)
|
|
|
|
{
|
|
|
|
struct nlattr *n;
|
|
|
|
int err, rem;
|
|
|
|
int i = 0;
|
|
|
|
|
|
|
|
if (!list)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
nla_for_each_nested(n, list, rem) {
|
|
|
|
struct sched_entry *entry;
|
|
|
|
|
|
|
|
if (nla_type(n) != TCA_TAPRIO_SCHED_ENTRY) {
|
|
|
|
NL_SET_ERR_MSG(extack, "Attribute is not of type 'entry'");
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
entry = kzalloc(sizeof(*entry), GFP_KERNEL);
|
|
|
|
if (!entry) {
|
|
|
|
NL_SET_ERR_MSG(extack, "Not enough memory for entry");
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
err = parse_sched_entry(n, entry, i, extack);
|
|
|
|
if (err < 0) {
|
|
|
|
kfree(entry);
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
list_add_tail(&entry->list, &q->entries);
|
|
|
|
i++;
|
|
|
|
}
|
|
|
|
|
|
|
|
q->num_entries = i;
|
|
|
|
|
|
|
|
return i;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Returns the number of entries in case of success */
|
|
|
|
static int parse_taprio_opt(struct nlattr **tb, struct taprio_sched *q,
|
|
|
|
struct netlink_ext_ack *extack)
|
|
|
|
{
|
|
|
|
int err = 0;
|
|
|
|
int clockid;
|
|
|
|
|
|
|
|
if (tb[TCA_TAPRIO_ATTR_SCHED_ENTRY_LIST] &&
|
|
|
|
tb[TCA_TAPRIO_ATTR_SCHED_SINGLE_ENTRY])
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (tb[TCA_TAPRIO_ATTR_SCHED_SINGLE_ENTRY] && q->num_entries == 0)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (q->clockid == -1 && !tb[TCA_TAPRIO_ATTR_SCHED_CLOCKID])
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (tb[TCA_TAPRIO_ATTR_SCHED_BASE_TIME])
|
|
|
|
q->base_time = nla_get_s64(
|
|
|
|
tb[TCA_TAPRIO_ATTR_SCHED_BASE_TIME]);
|
|
|
|
|
|
|
|
if (tb[TCA_TAPRIO_ATTR_SCHED_CLOCKID]) {
|
|
|
|
clockid = nla_get_s32(tb[TCA_TAPRIO_ATTR_SCHED_CLOCKID]);
|
|
|
|
|
|
|
|
/* We only support static clockids and we don't allow
|
|
|
|
* for it to be modified after the first init.
|
|
|
|
*/
|
|
|
|
if (clockid < 0 || (q->clockid != -1 && q->clockid != clockid))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
q->clockid = clockid;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (tb[TCA_TAPRIO_ATTR_SCHED_ENTRY_LIST])
|
|
|
|
err = parse_sched_list(
|
|
|
|
tb[TCA_TAPRIO_ATTR_SCHED_ENTRY_LIST], q, extack);
|
|
|
|
else if (tb[TCA_TAPRIO_ATTR_SCHED_SINGLE_ENTRY])
|
|
|
|
err = parse_sched_single_entry(
|
|
|
|
tb[TCA_TAPRIO_ATTR_SCHED_SINGLE_ENTRY], q, extack);
|
|
|
|
|
|
|
|
/* parse_sched_* return the number of entries in the schedule,
|
|
|
|
* a schedule with zero entries is an error.
|
|
|
|
*/
|
|
|
|
if (err == 0) {
|
|
|
|
NL_SET_ERR_MSG(extack, "The schedule should contain at least one entry");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int taprio_parse_mqprio_opt(struct net_device *dev,
|
|
|
|
struct tc_mqprio_qopt *qopt,
|
|
|
|
struct netlink_ext_ack *extack)
|
|
|
|
{
|
|
|
|
int i, j;
|
|
|
|
|
|
|
|
if (!qopt) {
|
|
|
|
NL_SET_ERR_MSG(extack, "'mqprio' configuration is necessary");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Verify num_tc is not out of max range */
|
|
|
|
if (qopt->num_tc > TC_MAX_QUEUE) {
|
|
|
|
NL_SET_ERR_MSG(extack, "Number of traffic classes is outside valid range");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* taprio imposes that traffic classes map 1:n to tx queues */
|
|
|
|
if (qopt->num_tc > dev->num_tx_queues) {
|
|
|
|
NL_SET_ERR_MSG(extack, "Number of traffic classes is greater than number of HW queues");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Verify priority mapping uses valid tcs */
|
|
|
|
for (i = 0; i < TC_BITMASK + 1; i++) {
|
|
|
|
if (qopt->prio_tc_map[i] >= qopt->num_tc) {
|
|
|
|
NL_SET_ERR_MSG(extack, "Invalid traffic class in priority to traffic class mapping");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = 0; i < qopt->num_tc; i++) {
|
|
|
|
unsigned int last = qopt->offset[i] + qopt->count[i];
|
|
|
|
|
|
|
|
/* Verify the queue count is in tx range being equal to the
|
|
|
|
* real_num_tx_queues indicates the last queue is in use.
|
|
|
|
*/
|
|
|
|
if (qopt->offset[i] >= dev->num_tx_queues ||
|
|
|
|
!qopt->count[i] ||
|
|
|
|
last > dev->real_num_tx_queues) {
|
|
|
|
NL_SET_ERR_MSG(extack, "Invalid queue in traffic class to queue mapping");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Verify that the offset and counts do not overlap */
|
|
|
|
for (j = i + 1; j < qopt->num_tc; j++) {
|
|
|
|
if (last > qopt->offset[j]) {
|
|
|
|
NL_SET_ERR_MSG(extack, "Detected overlap in the traffic class to queue mapping");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ktime_t taprio_get_start_time(struct Qdisc *sch)
|
|
|
|
{
|
|
|
|
struct taprio_sched *q = qdisc_priv(sch);
|
|
|
|
struct sched_entry *entry;
|
|
|
|
ktime_t now, base, cycle;
|
|
|
|
s64 n;
|
|
|
|
|
|
|
|
base = ns_to_ktime(q->base_time);
|
|
|
|
cycle = 0;
|
|
|
|
|
|
|
|
/* Calculate the cycle_time, by summing all the intervals.
|
|
|
|
*/
|
|
|
|
list_for_each_entry(entry, &q->entries, list)
|
|
|
|
cycle = ktime_add_ns(cycle, entry->interval);
|
|
|
|
|
|
|
|
if (!cycle)
|
|
|
|
return base;
|
|
|
|
|
|
|
|
now = q->get_time();
|
|
|
|
|
|
|
|
if (ktime_after(base, now))
|
|
|
|
return base;
|
|
|
|
|
|
|
|
/* Schedule the start time for the beginning of the next
|
|
|
|
* cycle.
|
|
|
|
*/
|
|
|
|
n = div64_s64(ktime_sub_ns(now, base), cycle);
|
|
|
|
|
|
|
|
return ktime_add_ns(base, (n + 1) * cycle);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void taprio_start_sched(struct Qdisc *sch, ktime_t start)
|
|
|
|
{
|
|
|
|
struct taprio_sched *q = qdisc_priv(sch);
|
|
|
|
struct sched_entry *first;
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&q->current_entry_lock, flags);
|
|
|
|
|
|
|
|
first = list_first_entry(&q->entries, struct sched_entry,
|
|
|
|
list);
|
|
|
|
|
|
|
|
first->close_time = ktime_add_ns(start, first->interval);
|
2019-04-17 20:51:57 +00:00
|
|
|
taprio_set_budget(q, first);
|
tc: Add support for configuring the taprio scheduler
This traffic scheduler allows traffic classes states (transmission
allowed/not allowed, in the simplest case) to be scheduled, according
to a pre-generated time sequence. This is the basis of the IEEE
802.1Qbv specification.
Example configuration:
tc qdisc replace dev enp3s0 parent root handle 100 taprio \
num_tc 3 \
map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \
queues 1@0 1@1 2@2 \
base-time 1528743495910289987 \
sched-entry S 01 300000 \
sched-entry S 02 300000 \
sched-entry S 04 300000 \
clockid CLOCK_TAI
The configuration format is similar to mqprio. The main difference is
the presence of a schedule, built by multiple "sched-entry"
definitions, each entry has the following format:
sched-entry <CMD> <GATE MASK> <INTERVAL>
The only supported <CMD> is "S", which means "SetGateStates",
following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK>
is a bitmask where each bit is a associated with a traffic class, so
bit 0 (the least significant bit) being "on" means that traffic class
0 is "active" for that schedule entry. <INTERVAL> is a time duration
in nanoseconds that specifies for how long that state defined by <CMD>
and <GATE MASK> should be held before moving to the next entry.
This schedule is circular, that is, after the last entry is executed
it starts from the first one, indefinitely.
The other parameters can be defined as follows:
- base-time: specifies the instant when the schedule starts, if
'base-time' is a time in the past, the schedule will start at
base-time + (N * cycle-time)
where N is the smallest integer so the resulting time is greater
than "now", and "cycle-time" is the sum of all the intervals of the
entries in the schedule;
- clockid: specifies the reference clock to be used;
The parameters should be similar to what the IEEE 802.1Q family of
specification defines.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 00:59:43 +00:00
|
|
|
rcu_assign_pointer(q->current_entry, NULL);
|
|
|
|
|
|
|
|
spin_unlock_irqrestore(&q->current_entry_lock, flags);
|
|
|
|
|
|
|
|
hrtimer_start(&q->advance_timer, start, HRTIMER_MODE_ABS);
|
|
|
|
}
|
|
|
|
|
2019-04-08 17:12:17 +00:00
|
|
|
static void taprio_set_picos_per_byte(struct net_device *dev,
|
|
|
|
struct taprio_sched *q)
|
|
|
|
{
|
|
|
|
struct ethtool_link_ksettings ecmd;
|
|
|
|
int picos_per_byte = -1;
|
|
|
|
|
|
|
|
if (!__ethtool_get_link_ksettings(dev, &ecmd) &&
|
|
|
|
ecmd.base.speed != SPEED_UNKNOWN)
|
|
|
|
picos_per_byte = div64_s64(NSEC_PER_SEC * 1000LL * 8,
|
|
|
|
ecmd.base.speed * 1000 * 1000);
|
|
|
|
|
|
|
|
atomic64_set(&q->picos_per_byte, picos_per_byte);
|
|
|
|
netdev_dbg(dev, "taprio: set %s's picos_per_byte to: %lld, linkspeed: %d\n",
|
|
|
|
dev->name, (long long)atomic64_read(&q->picos_per_byte),
|
|
|
|
ecmd.base.speed);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int taprio_dev_notifier(struct notifier_block *nb, unsigned long event,
|
|
|
|
void *ptr)
|
|
|
|
{
|
|
|
|
struct net_device *dev = netdev_notifier_info_to_dev(ptr);
|
|
|
|
struct net_device *qdev;
|
|
|
|
struct taprio_sched *q;
|
|
|
|
bool found = false;
|
|
|
|
|
|
|
|
ASSERT_RTNL();
|
|
|
|
|
|
|
|
if (event != NETDEV_UP && event != NETDEV_CHANGE)
|
|
|
|
return NOTIFY_DONE;
|
|
|
|
|
|
|
|
spin_lock(&taprio_list_lock);
|
|
|
|
list_for_each_entry(q, &taprio_list, taprio_list) {
|
|
|
|
qdev = qdisc_dev(q->root);
|
|
|
|
if (qdev == dev) {
|
|
|
|
found = true;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
spin_unlock(&taprio_list_lock);
|
|
|
|
|
|
|
|
if (found)
|
|
|
|
taprio_set_picos_per_byte(dev, q);
|
|
|
|
|
|
|
|
return NOTIFY_DONE;
|
|
|
|
}
|
|
|
|
|
tc: Add support for configuring the taprio scheduler
This traffic scheduler allows traffic classes states (transmission
allowed/not allowed, in the simplest case) to be scheduled, according
to a pre-generated time sequence. This is the basis of the IEEE
802.1Qbv specification.
Example configuration:
tc qdisc replace dev enp3s0 parent root handle 100 taprio \
num_tc 3 \
map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \
queues 1@0 1@1 2@2 \
base-time 1528743495910289987 \
sched-entry S 01 300000 \
sched-entry S 02 300000 \
sched-entry S 04 300000 \
clockid CLOCK_TAI
The configuration format is similar to mqprio. The main difference is
the presence of a schedule, built by multiple "sched-entry"
definitions, each entry has the following format:
sched-entry <CMD> <GATE MASK> <INTERVAL>
The only supported <CMD> is "S", which means "SetGateStates",
following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK>
is a bitmask where each bit is a associated with a traffic class, so
bit 0 (the least significant bit) being "on" means that traffic class
0 is "active" for that schedule entry. <INTERVAL> is a time duration
in nanoseconds that specifies for how long that state defined by <CMD>
and <GATE MASK> should be held before moving to the next entry.
This schedule is circular, that is, after the last entry is executed
it starts from the first one, indefinitely.
The other parameters can be defined as follows:
- base-time: specifies the instant when the schedule starts, if
'base-time' is a time in the past, the schedule will start at
base-time + (N * cycle-time)
where N is the smallest integer so the resulting time is greater
than "now", and "cycle-time" is the sum of all the intervals of the
entries in the schedule;
- clockid: specifies the reference clock to be used;
The parameters should be similar to what the IEEE 802.1Q family of
specification defines.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 00:59:43 +00:00
|
|
|
static int taprio_change(struct Qdisc *sch, struct nlattr *opt,
|
|
|
|
struct netlink_ext_ack *extack)
|
|
|
|
{
|
|
|
|
struct nlattr *tb[TCA_TAPRIO_ATTR_MAX + 1] = { };
|
|
|
|
struct taprio_sched *q = qdisc_priv(sch);
|
|
|
|
struct net_device *dev = qdisc_dev(sch);
|
|
|
|
struct tc_mqprio_qopt *mqprio = NULL;
|
|
|
|
int i, err, size;
|
|
|
|
ktime_t start;
|
|
|
|
|
|
|
|
err = nla_parse_nested(tb, TCA_TAPRIO_ATTR_MAX, opt,
|
|
|
|
taprio_policy, extack);
|
|
|
|
if (err < 0)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
if (tb[TCA_TAPRIO_ATTR_PRIOMAP])
|
|
|
|
mqprio = nla_data(tb[TCA_TAPRIO_ATTR_PRIOMAP]);
|
|
|
|
|
|
|
|
err = taprio_parse_mqprio_opt(dev, mqprio, extack);
|
|
|
|
if (err < 0)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
/* A schedule with less than one entry is an error */
|
|
|
|
size = parse_taprio_opt(tb, q, extack);
|
|
|
|
if (size < 0)
|
|
|
|
return size;
|
|
|
|
|
|
|
|
hrtimer_init(&q->advance_timer, q->clockid, HRTIMER_MODE_ABS);
|
|
|
|
q->advance_timer.function = advance_sched;
|
|
|
|
|
|
|
|
switch (q->clockid) {
|
|
|
|
case CLOCK_REALTIME:
|
|
|
|
q->get_time = ktime_get_real;
|
|
|
|
break;
|
|
|
|
case CLOCK_MONOTONIC:
|
|
|
|
q->get_time = ktime_get;
|
|
|
|
break;
|
|
|
|
case CLOCK_BOOTTIME:
|
|
|
|
q->get_time = ktime_get_boottime;
|
|
|
|
break;
|
|
|
|
case CLOCK_TAI:
|
|
|
|
q->get_time = ktime_get_clocktai;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return -ENOTSUPP;
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = 0; i < dev->num_tx_queues; i++) {
|
|
|
|
struct netdev_queue *dev_queue;
|
|
|
|
struct Qdisc *qdisc;
|
|
|
|
|
|
|
|
dev_queue = netdev_get_tx_queue(dev, i);
|
|
|
|
qdisc = qdisc_create_dflt(dev_queue,
|
|
|
|
&pfifo_qdisc_ops,
|
|
|
|
TC_H_MAKE(TC_H_MAJ(sch->handle),
|
|
|
|
TC_H_MIN(i + 1)),
|
|
|
|
extack);
|
|
|
|
if (!qdisc)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
if (i < dev->real_num_tx_queues)
|
|
|
|
qdisc_hash_add(qdisc, false);
|
|
|
|
|
|
|
|
q->qdiscs[i] = qdisc;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (mqprio) {
|
|
|
|
netdev_set_num_tc(dev, mqprio->num_tc);
|
|
|
|
for (i = 0; i < mqprio->num_tc; i++)
|
|
|
|
netdev_set_tc_queue(dev, i,
|
|
|
|
mqprio->count[i],
|
|
|
|
mqprio->offset[i]);
|
|
|
|
|
|
|
|
/* Always use supplied priority mappings */
|
|
|
|
for (i = 0; i < TC_BITMASK + 1; i++)
|
|
|
|
netdev_set_prio_tc_map(dev, i,
|
|
|
|
mqprio->prio_tc_map[i]);
|
|
|
|
}
|
|
|
|
|
2019-04-08 17:12:17 +00:00
|
|
|
taprio_set_picos_per_byte(dev, q);
|
tc: Add support for configuring the taprio scheduler
This traffic scheduler allows traffic classes states (transmission
allowed/not allowed, in the simplest case) to be scheduled, according
to a pre-generated time sequence. This is the basis of the IEEE
802.1Qbv specification.
Example configuration:
tc qdisc replace dev enp3s0 parent root handle 100 taprio \
num_tc 3 \
map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \
queues 1@0 1@1 2@2 \
base-time 1528743495910289987 \
sched-entry S 01 300000 \
sched-entry S 02 300000 \
sched-entry S 04 300000 \
clockid CLOCK_TAI
The configuration format is similar to mqprio. The main difference is
the presence of a schedule, built by multiple "sched-entry"
definitions, each entry has the following format:
sched-entry <CMD> <GATE MASK> <INTERVAL>
The only supported <CMD> is "S", which means "SetGateStates",
following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK>
is a bitmask where each bit is a associated with a traffic class, so
bit 0 (the least significant bit) being "on" means that traffic class
0 is "active" for that schedule entry. <INTERVAL> is a time duration
in nanoseconds that specifies for how long that state defined by <CMD>
and <GATE MASK> should be held before moving to the next entry.
This schedule is circular, that is, after the last entry is executed
it starts from the first one, indefinitely.
The other parameters can be defined as follows:
- base-time: specifies the instant when the schedule starts, if
'base-time' is a time in the past, the schedule will start at
base-time + (N * cycle-time)
where N is the smallest integer so the resulting time is greater
than "now", and "cycle-time" is the sum of all the intervals of the
entries in the schedule;
- clockid: specifies the reference clock to be used;
The parameters should be similar to what the IEEE 802.1Q family of
specification defines.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 00:59:43 +00:00
|
|
|
start = taprio_get_start_time(sch);
|
|
|
|
if (!start)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
taprio_start_sched(sch, start);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void taprio_destroy(struct Qdisc *sch)
|
|
|
|
{
|
|
|
|
struct taprio_sched *q = qdisc_priv(sch);
|
|
|
|
struct net_device *dev = qdisc_dev(sch);
|
|
|
|
struct sched_entry *entry, *n;
|
|
|
|
unsigned int i;
|
|
|
|
|
2019-04-08 17:12:17 +00:00
|
|
|
spin_lock(&taprio_list_lock);
|
|
|
|
list_del(&q->taprio_list);
|
|
|
|
spin_unlock(&taprio_list_lock);
|
|
|
|
|
tc: Add support for configuring the taprio scheduler
This traffic scheduler allows traffic classes states (transmission
allowed/not allowed, in the simplest case) to be scheduled, according
to a pre-generated time sequence. This is the basis of the IEEE
802.1Qbv specification.
Example configuration:
tc qdisc replace dev enp3s0 parent root handle 100 taprio \
num_tc 3 \
map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \
queues 1@0 1@1 2@2 \
base-time 1528743495910289987 \
sched-entry S 01 300000 \
sched-entry S 02 300000 \
sched-entry S 04 300000 \
clockid CLOCK_TAI
The configuration format is similar to mqprio. The main difference is
the presence of a schedule, built by multiple "sched-entry"
definitions, each entry has the following format:
sched-entry <CMD> <GATE MASK> <INTERVAL>
The only supported <CMD> is "S", which means "SetGateStates",
following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK>
is a bitmask where each bit is a associated with a traffic class, so
bit 0 (the least significant bit) being "on" means that traffic class
0 is "active" for that schedule entry. <INTERVAL> is a time duration
in nanoseconds that specifies for how long that state defined by <CMD>
and <GATE MASK> should be held before moving to the next entry.
This schedule is circular, that is, after the last entry is executed
it starts from the first one, indefinitely.
The other parameters can be defined as follows:
- base-time: specifies the instant when the schedule starts, if
'base-time' is a time in the past, the schedule will start at
base-time + (N * cycle-time)
where N is the smallest integer so the resulting time is greater
than "now", and "cycle-time" is the sum of all the intervals of the
entries in the schedule;
- clockid: specifies the reference clock to be used;
The parameters should be similar to what the IEEE 802.1Q family of
specification defines.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 00:59:43 +00:00
|
|
|
hrtimer_cancel(&q->advance_timer);
|
|
|
|
|
|
|
|
if (q->qdiscs) {
|
|
|
|
for (i = 0; i < dev->num_tx_queues && q->qdiscs[i]; i++)
|
|
|
|
qdisc_put(q->qdiscs[i]);
|
|
|
|
|
|
|
|
kfree(q->qdiscs);
|
|
|
|
}
|
|
|
|
q->qdiscs = NULL;
|
|
|
|
|
|
|
|
netdev_set_num_tc(dev, 0);
|
|
|
|
|
|
|
|
list_for_each_entry_safe(entry, n, &q->entries, list) {
|
|
|
|
list_del(&entry->list);
|
|
|
|
kfree(entry);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int taprio_init(struct Qdisc *sch, struct nlattr *opt,
|
|
|
|
struct netlink_ext_ack *extack)
|
|
|
|
{
|
|
|
|
struct taprio_sched *q = qdisc_priv(sch);
|
|
|
|
struct net_device *dev = qdisc_dev(sch);
|
|
|
|
|
|
|
|
INIT_LIST_HEAD(&q->entries);
|
|
|
|
spin_lock_init(&q->current_entry_lock);
|
|
|
|
|
|
|
|
/* We may overwrite the configuration later */
|
|
|
|
hrtimer_init(&q->advance_timer, CLOCK_TAI, HRTIMER_MODE_ABS);
|
|
|
|
|
|
|
|
q->root = sch;
|
|
|
|
|
|
|
|
/* We only support static clockids. Use an invalid value as default
|
|
|
|
* and get the valid one on taprio_change().
|
|
|
|
*/
|
|
|
|
q->clockid = -1;
|
|
|
|
|
|
|
|
if (sch->parent != TC_H_ROOT)
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
|
|
|
|
if (!netif_is_multiqueue(dev))
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
|
|
|
|
/* pre-allocate qdisc, attachment can't fail */
|
|
|
|
q->qdiscs = kcalloc(dev->num_tx_queues,
|
|
|
|
sizeof(q->qdiscs[0]),
|
|
|
|
GFP_KERNEL);
|
|
|
|
|
|
|
|
if (!q->qdiscs)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
if (!opt)
|
|
|
|
return -EINVAL;
|
|
|
|
|
2019-04-08 17:12:17 +00:00
|
|
|
spin_lock(&taprio_list_lock);
|
|
|
|
list_add(&q->taprio_list, &taprio_list);
|
|
|
|
spin_unlock(&taprio_list_lock);
|
|
|
|
|
tc: Add support for configuring the taprio scheduler
This traffic scheduler allows traffic classes states (transmission
allowed/not allowed, in the simplest case) to be scheduled, according
to a pre-generated time sequence. This is the basis of the IEEE
802.1Qbv specification.
Example configuration:
tc qdisc replace dev enp3s0 parent root handle 100 taprio \
num_tc 3 \
map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \
queues 1@0 1@1 2@2 \
base-time 1528743495910289987 \
sched-entry S 01 300000 \
sched-entry S 02 300000 \
sched-entry S 04 300000 \
clockid CLOCK_TAI
The configuration format is similar to mqprio. The main difference is
the presence of a schedule, built by multiple "sched-entry"
definitions, each entry has the following format:
sched-entry <CMD> <GATE MASK> <INTERVAL>
The only supported <CMD> is "S", which means "SetGateStates",
following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK>
is a bitmask where each bit is a associated with a traffic class, so
bit 0 (the least significant bit) being "on" means that traffic class
0 is "active" for that schedule entry. <INTERVAL> is a time duration
in nanoseconds that specifies for how long that state defined by <CMD>
and <GATE MASK> should be held before moving to the next entry.
This schedule is circular, that is, after the last entry is executed
it starts from the first one, indefinitely.
The other parameters can be defined as follows:
- base-time: specifies the instant when the schedule starts, if
'base-time' is a time in the past, the schedule will start at
base-time + (N * cycle-time)
where N is the smallest integer so the resulting time is greater
than "now", and "cycle-time" is the sum of all the intervals of the
entries in the schedule;
- clockid: specifies the reference clock to be used;
The parameters should be similar to what the IEEE 802.1Q family of
specification defines.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 00:59:43 +00:00
|
|
|
return taprio_change(sch, opt, extack);
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct netdev_queue *taprio_queue_get(struct Qdisc *sch,
|
|
|
|
unsigned long cl)
|
|
|
|
{
|
|
|
|
struct net_device *dev = qdisc_dev(sch);
|
|
|
|
unsigned long ntx = cl - 1;
|
|
|
|
|
|
|
|
if (ntx >= dev->num_tx_queues)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
return netdev_get_tx_queue(dev, ntx);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int taprio_graft(struct Qdisc *sch, unsigned long cl,
|
|
|
|
struct Qdisc *new, struct Qdisc **old,
|
|
|
|
struct netlink_ext_ack *extack)
|
|
|
|
{
|
|
|
|
struct taprio_sched *q = qdisc_priv(sch);
|
|
|
|
struct net_device *dev = qdisc_dev(sch);
|
|
|
|
struct netdev_queue *dev_queue = taprio_queue_get(sch, cl);
|
|
|
|
|
|
|
|
if (!dev_queue)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (dev->flags & IFF_UP)
|
|
|
|
dev_deactivate(dev);
|
|
|
|
|
|
|
|
*old = q->qdiscs[cl - 1];
|
|
|
|
q->qdiscs[cl - 1] = new;
|
|
|
|
|
|
|
|
if (new)
|
|
|
|
new->flags |= TCQ_F_ONETXQUEUE | TCQ_F_NOPARENT;
|
|
|
|
|
|
|
|
if (dev->flags & IFF_UP)
|
|
|
|
dev_activate(dev);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int dump_entry(struct sk_buff *msg,
|
|
|
|
const struct sched_entry *entry)
|
|
|
|
{
|
|
|
|
struct nlattr *item;
|
|
|
|
|
|
|
|
item = nla_nest_start(msg, TCA_TAPRIO_SCHED_ENTRY);
|
|
|
|
if (!item)
|
|
|
|
return -ENOSPC;
|
|
|
|
|
|
|
|
if (nla_put_u32(msg, TCA_TAPRIO_SCHED_ENTRY_INDEX, entry->index))
|
|
|
|
goto nla_put_failure;
|
|
|
|
|
|
|
|
if (nla_put_u8(msg, TCA_TAPRIO_SCHED_ENTRY_CMD, entry->command))
|
|
|
|
goto nla_put_failure;
|
|
|
|
|
|
|
|
if (nla_put_u32(msg, TCA_TAPRIO_SCHED_ENTRY_GATE_MASK,
|
|
|
|
entry->gate_mask))
|
|
|
|
goto nla_put_failure;
|
|
|
|
|
|
|
|
if (nla_put_u32(msg, TCA_TAPRIO_SCHED_ENTRY_INTERVAL,
|
|
|
|
entry->interval))
|
|
|
|
goto nla_put_failure;
|
|
|
|
|
|
|
|
return nla_nest_end(msg, item);
|
|
|
|
|
|
|
|
nla_put_failure:
|
|
|
|
nla_nest_cancel(msg, item);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int taprio_dump(struct Qdisc *sch, struct sk_buff *skb)
|
|
|
|
{
|
|
|
|
struct taprio_sched *q = qdisc_priv(sch);
|
|
|
|
struct net_device *dev = qdisc_dev(sch);
|
|
|
|
struct tc_mqprio_qopt opt = { 0 };
|
|
|
|
struct nlattr *nest, *entry_list;
|
|
|
|
struct sched_entry *entry;
|
|
|
|
unsigned int i;
|
|
|
|
|
|
|
|
opt.num_tc = netdev_get_num_tc(dev);
|
|
|
|
memcpy(opt.prio_tc_map, dev->prio_tc_map, sizeof(opt.prio_tc_map));
|
|
|
|
|
|
|
|
for (i = 0; i < netdev_get_num_tc(dev); i++) {
|
|
|
|
opt.count[i] = dev->tc_to_txq[i].count;
|
|
|
|
opt.offset[i] = dev->tc_to_txq[i].offset;
|
|
|
|
}
|
|
|
|
|
|
|
|
nest = nla_nest_start(skb, TCA_OPTIONS);
|
|
|
|
if (!nest)
|
|
|
|
return -ENOSPC;
|
|
|
|
|
|
|
|
if (nla_put(skb, TCA_TAPRIO_ATTR_PRIOMAP, sizeof(opt), &opt))
|
|
|
|
goto options_error;
|
|
|
|
|
|
|
|
if (nla_put_s64(skb, TCA_TAPRIO_ATTR_SCHED_BASE_TIME,
|
|
|
|
q->base_time, TCA_TAPRIO_PAD))
|
|
|
|
goto options_error;
|
|
|
|
|
|
|
|
if (nla_put_s32(skb, TCA_TAPRIO_ATTR_SCHED_CLOCKID, q->clockid))
|
|
|
|
goto options_error;
|
|
|
|
|
|
|
|
entry_list = nla_nest_start(skb, TCA_TAPRIO_ATTR_SCHED_ENTRY_LIST);
|
|
|
|
if (!entry_list)
|
|
|
|
goto options_error;
|
|
|
|
|
|
|
|
list_for_each_entry(entry, &q->entries, list) {
|
|
|
|
if (dump_entry(skb, entry) < 0)
|
|
|
|
goto options_error;
|
|
|
|
}
|
|
|
|
|
|
|
|
nla_nest_end(skb, entry_list);
|
|
|
|
|
|
|
|
return nla_nest_end(skb, nest);
|
|
|
|
|
|
|
|
options_error:
|
|
|
|
nla_nest_cancel(skb, nest);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct Qdisc *taprio_leaf(struct Qdisc *sch, unsigned long cl)
|
|
|
|
{
|
|
|
|
struct netdev_queue *dev_queue = taprio_queue_get(sch, cl);
|
|
|
|
|
|
|
|
if (!dev_queue)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
return dev_queue->qdisc_sleeping;
|
|
|
|
}
|
|
|
|
|
|
|
|
static unsigned long taprio_find(struct Qdisc *sch, u32 classid)
|
|
|
|
{
|
|
|
|
unsigned int ntx = TC_H_MIN(classid);
|
|
|
|
|
|
|
|
if (!taprio_queue_get(sch, ntx))
|
|
|
|
return 0;
|
|
|
|
return ntx;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int taprio_dump_class(struct Qdisc *sch, unsigned long cl,
|
|
|
|
struct sk_buff *skb, struct tcmsg *tcm)
|
|
|
|
{
|
|
|
|
struct netdev_queue *dev_queue = taprio_queue_get(sch, cl);
|
|
|
|
|
|
|
|
tcm->tcm_parent = TC_H_ROOT;
|
|
|
|
tcm->tcm_handle |= TC_H_MIN(cl);
|
|
|
|
tcm->tcm_info = dev_queue->qdisc_sleeping->handle;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int taprio_dump_class_stats(struct Qdisc *sch, unsigned long cl,
|
|
|
|
struct gnet_dump *d)
|
|
|
|
__releases(d->lock)
|
|
|
|
__acquires(d->lock)
|
|
|
|
{
|
|
|
|
struct netdev_queue *dev_queue = taprio_queue_get(sch, cl);
|
|
|
|
|
|
|
|
sch = dev_queue->qdisc_sleeping;
|
|
|
|
if (gnet_stats_copy_basic(&sch->running, d, NULL, &sch->bstats) < 0 ||
|
2019-03-28 15:53:12 +00:00
|
|
|
qdisc_qstats_copy(d, sch) < 0)
|
tc: Add support for configuring the taprio scheduler
This traffic scheduler allows traffic classes states (transmission
allowed/not allowed, in the simplest case) to be scheduled, according
to a pre-generated time sequence. This is the basis of the IEEE
802.1Qbv specification.
Example configuration:
tc qdisc replace dev enp3s0 parent root handle 100 taprio \
num_tc 3 \
map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \
queues 1@0 1@1 2@2 \
base-time 1528743495910289987 \
sched-entry S 01 300000 \
sched-entry S 02 300000 \
sched-entry S 04 300000 \
clockid CLOCK_TAI
The configuration format is similar to mqprio. The main difference is
the presence of a schedule, built by multiple "sched-entry"
definitions, each entry has the following format:
sched-entry <CMD> <GATE MASK> <INTERVAL>
The only supported <CMD> is "S", which means "SetGateStates",
following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK>
is a bitmask where each bit is a associated with a traffic class, so
bit 0 (the least significant bit) being "on" means that traffic class
0 is "active" for that schedule entry. <INTERVAL> is a time duration
in nanoseconds that specifies for how long that state defined by <CMD>
and <GATE MASK> should be held before moving to the next entry.
This schedule is circular, that is, after the last entry is executed
it starts from the first one, indefinitely.
The other parameters can be defined as follows:
- base-time: specifies the instant when the schedule starts, if
'base-time' is a time in the past, the schedule will start at
base-time + (N * cycle-time)
where N is the smallest integer so the resulting time is greater
than "now", and "cycle-time" is the sum of all the intervals of the
entries in the schedule;
- clockid: specifies the reference clock to be used;
The parameters should be similar to what the IEEE 802.1Q family of
specification defines.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 00:59:43 +00:00
|
|
|
return -1;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void taprio_walk(struct Qdisc *sch, struct qdisc_walker *arg)
|
|
|
|
{
|
|
|
|
struct net_device *dev = qdisc_dev(sch);
|
|
|
|
unsigned long ntx;
|
|
|
|
|
|
|
|
if (arg->stop)
|
|
|
|
return;
|
|
|
|
|
|
|
|
arg->count = arg->skip;
|
|
|
|
for (ntx = arg->skip; ntx < dev->num_tx_queues; ntx++) {
|
|
|
|
if (arg->fn(sch, ntx + 1, arg) < 0) {
|
|
|
|
arg->stop = 1;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
arg->count++;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct netdev_queue *taprio_select_queue(struct Qdisc *sch,
|
|
|
|
struct tcmsg *tcm)
|
|
|
|
{
|
|
|
|
return taprio_queue_get(sch, TC_H_MIN(tcm->tcm_parent));
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct Qdisc_class_ops taprio_class_ops = {
|
|
|
|
.graft = taprio_graft,
|
|
|
|
.leaf = taprio_leaf,
|
|
|
|
.find = taprio_find,
|
|
|
|
.walk = taprio_walk,
|
|
|
|
.dump = taprio_dump_class,
|
|
|
|
.dump_stats = taprio_dump_class_stats,
|
|
|
|
.select_queue = taprio_select_queue,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct Qdisc_ops taprio_qdisc_ops __read_mostly = {
|
|
|
|
.cl_ops = &taprio_class_ops,
|
|
|
|
.id = "taprio",
|
|
|
|
.priv_size = sizeof(struct taprio_sched),
|
|
|
|
.init = taprio_init,
|
|
|
|
.destroy = taprio_destroy,
|
|
|
|
.peek = taprio_peek,
|
|
|
|
.dequeue = taprio_dequeue,
|
|
|
|
.enqueue = taprio_enqueue,
|
|
|
|
.dump = taprio_dump,
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
};
|
|
|
|
|
2019-04-08 17:12:17 +00:00
|
|
|
static struct notifier_block taprio_device_notifier = {
|
|
|
|
.notifier_call = taprio_dev_notifier,
|
|
|
|
};
|
|
|
|
|
tc: Add support for configuring the taprio scheduler
This traffic scheduler allows traffic classes states (transmission
allowed/not allowed, in the simplest case) to be scheduled, according
to a pre-generated time sequence. This is the basis of the IEEE
802.1Qbv specification.
Example configuration:
tc qdisc replace dev enp3s0 parent root handle 100 taprio \
num_tc 3 \
map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \
queues 1@0 1@1 2@2 \
base-time 1528743495910289987 \
sched-entry S 01 300000 \
sched-entry S 02 300000 \
sched-entry S 04 300000 \
clockid CLOCK_TAI
The configuration format is similar to mqprio. The main difference is
the presence of a schedule, built by multiple "sched-entry"
definitions, each entry has the following format:
sched-entry <CMD> <GATE MASK> <INTERVAL>
The only supported <CMD> is "S", which means "SetGateStates",
following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK>
is a bitmask where each bit is a associated with a traffic class, so
bit 0 (the least significant bit) being "on" means that traffic class
0 is "active" for that schedule entry. <INTERVAL> is a time duration
in nanoseconds that specifies for how long that state defined by <CMD>
and <GATE MASK> should be held before moving to the next entry.
This schedule is circular, that is, after the last entry is executed
it starts from the first one, indefinitely.
The other parameters can be defined as follows:
- base-time: specifies the instant when the schedule starts, if
'base-time' is a time in the past, the schedule will start at
base-time + (N * cycle-time)
where N is the smallest integer so the resulting time is greater
than "now", and "cycle-time" is the sum of all the intervals of the
entries in the schedule;
- clockid: specifies the reference clock to be used;
The parameters should be similar to what the IEEE 802.1Q family of
specification defines.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 00:59:43 +00:00
|
|
|
static int __init taprio_module_init(void)
|
|
|
|
{
|
2019-04-08 17:12:17 +00:00
|
|
|
int err = register_netdevice_notifier(&taprio_device_notifier);
|
|
|
|
|
|
|
|
if (err)
|
|
|
|
return err;
|
|
|
|
|
tc: Add support for configuring the taprio scheduler
This traffic scheduler allows traffic classes states (transmission
allowed/not allowed, in the simplest case) to be scheduled, according
to a pre-generated time sequence. This is the basis of the IEEE
802.1Qbv specification.
Example configuration:
tc qdisc replace dev enp3s0 parent root handle 100 taprio \
num_tc 3 \
map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \
queues 1@0 1@1 2@2 \
base-time 1528743495910289987 \
sched-entry S 01 300000 \
sched-entry S 02 300000 \
sched-entry S 04 300000 \
clockid CLOCK_TAI
The configuration format is similar to mqprio. The main difference is
the presence of a schedule, built by multiple "sched-entry"
definitions, each entry has the following format:
sched-entry <CMD> <GATE MASK> <INTERVAL>
The only supported <CMD> is "S", which means "SetGateStates",
following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK>
is a bitmask where each bit is a associated with a traffic class, so
bit 0 (the least significant bit) being "on" means that traffic class
0 is "active" for that schedule entry. <INTERVAL> is a time duration
in nanoseconds that specifies for how long that state defined by <CMD>
and <GATE MASK> should be held before moving to the next entry.
This schedule is circular, that is, after the last entry is executed
it starts from the first one, indefinitely.
The other parameters can be defined as follows:
- base-time: specifies the instant when the schedule starts, if
'base-time' is a time in the past, the schedule will start at
base-time + (N * cycle-time)
where N is the smallest integer so the resulting time is greater
than "now", and "cycle-time" is the sum of all the intervals of the
entries in the schedule;
- clockid: specifies the reference clock to be used;
The parameters should be similar to what the IEEE 802.1Q family of
specification defines.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 00:59:43 +00:00
|
|
|
return register_qdisc(&taprio_qdisc_ops);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __exit taprio_module_exit(void)
|
|
|
|
{
|
|
|
|
unregister_qdisc(&taprio_qdisc_ops);
|
2019-04-08 17:12:17 +00:00
|
|
|
unregister_netdevice_notifier(&taprio_device_notifier);
|
tc: Add support for configuring the taprio scheduler
This traffic scheduler allows traffic classes states (transmission
allowed/not allowed, in the simplest case) to be scheduled, according
to a pre-generated time sequence. This is the basis of the IEEE
802.1Qbv specification.
Example configuration:
tc qdisc replace dev enp3s0 parent root handle 100 taprio \
num_tc 3 \
map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \
queues 1@0 1@1 2@2 \
base-time 1528743495910289987 \
sched-entry S 01 300000 \
sched-entry S 02 300000 \
sched-entry S 04 300000 \
clockid CLOCK_TAI
The configuration format is similar to mqprio. The main difference is
the presence of a schedule, built by multiple "sched-entry"
definitions, each entry has the following format:
sched-entry <CMD> <GATE MASK> <INTERVAL>
The only supported <CMD> is "S", which means "SetGateStates",
following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK>
is a bitmask where each bit is a associated with a traffic class, so
bit 0 (the least significant bit) being "on" means that traffic class
0 is "active" for that schedule entry. <INTERVAL> is a time duration
in nanoseconds that specifies for how long that state defined by <CMD>
and <GATE MASK> should be held before moving to the next entry.
This schedule is circular, that is, after the last entry is executed
it starts from the first one, indefinitely.
The other parameters can be defined as follows:
- base-time: specifies the instant when the schedule starts, if
'base-time' is a time in the past, the schedule will start at
base-time + (N * cycle-time)
where N is the smallest integer so the resulting time is greater
than "now", and "cycle-time" is the sum of all the intervals of the
entries in the schedule;
- clockid: specifies the reference clock to be used;
The parameters should be similar to what the IEEE 802.1Q family of
specification defines.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 00:59:43 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
module_init(taprio_module_init);
|
|
|
|
module_exit(taprio_module_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|