linux-stable/tools/perf/builtin-data.c

126 lines
3 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
// SPDX-License-Identifier: GPL-2.0
#include <linux/compiler.h>
#include <stdio.h>
#include <string.h>
#include "builtin.h"
#include "debug.h"
#include <subcmd/parse-options.h>
#include "data-convert.h"
2023-04-10 16:25:10 +00:00
#include "util/util.h"
typedef int (*data_cmd_fn_t)(int argc, const char **argv);
struct data_cmd {
const char *name;
const char *summary;
data_cmd_fn_t fn;
};
static struct data_cmd data_cmds[];
#define for_each_cmd(cmd) \
for (cmd = data_cmds; cmd && cmd->name; cmd++)
static const char * const data_subcommands[] = { "convert", NULL };
static const char *data_usage[] = {
perf data: Correct -h output There is currently only 1 'perf data' command, but supporting extra commands was breaking the help output. Simplify for now so that the help output is correct. Before: $ perf data -h Usage: perf data [<common options>] <command> [<options>] $ perf data Usage: perf data [<common options>] <command> [<options>] Available commands: convert - converts data file between formats After: $ perf data Usage: perf data convert [<options>] -f, --force don't complain, do it -i, --input <file> input file name -v, --verbose be more verbose --all Convert all events --to-ctf ... Convert to CTF format --to-json ... Convert to JSON format --tod Convert time to wall clock time $ perf data -h Usage: perf data convert [<options>] -f, --force don't complain, do it -i, --input <file> input file name -v, --verbose be more verbose --all Convert all events --to-ctf ... Convert to CTF format --to-json ... Convert to JSON format --tod Convert time to wall clock time Signed-off-by: Joshua Martinez <joshuamart@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20210824205829.52822-1-irogers@google.com Signed-off-by: Ian Rogers <irogers@google.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-08-24 20:58:29 +00:00
"perf data convert [<options>]",
NULL
};
perf data: Correct -h output There is currently only 1 'perf data' command, but supporting extra commands was breaking the help output. Simplify for now so that the help output is correct. Before: $ perf data -h Usage: perf data [<common options>] <command> [<options>] $ perf data Usage: perf data [<common options>] <command> [<options>] Available commands: convert - converts data file between formats After: $ perf data Usage: perf data convert [<options>] -f, --force don't complain, do it -i, --input <file> input file name -v, --verbose be more verbose --all Convert all events --to-ctf ... Convert to CTF format --to-json ... Convert to JSON format --tod Convert time to wall clock time $ perf data -h Usage: perf data convert [<options>] -f, --force don't complain, do it -i, --input <file> input file name -v, --verbose be more verbose --all Convert all events --to-ctf ... Convert to CTF format --to-json ... Convert to JSON format --tod Convert time to wall clock time Signed-off-by: Joshua Martinez <joshuamart@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20210824205829.52822-1-irogers@google.com Signed-off-by: Ian Rogers <irogers@google.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-08-24 20:58:29 +00:00
const char *to_json;
const char *to_ctf;
struct perf_data_convert_opts opts = {
.force = false,
.all = false,
perf data: Add perf data to CTF conversion support Adding 'perf data convert' to convert perf data file into different format. This patch adds support for CTF format conversion. To convert perf.data into CTF run: $ perf data convert --to-ctf=./ctf-data/ [ perf data convert: Converted 'perf.data' into CTF data './ctf-data/' ] [ perf data convert: Converted and wrote 11.268 MB (100230 samples) ] The command will create CTF metadata out of perf.data file (or one specified via -i option) and then convert all sample events into single CTF stream. Each sample_type bit is translated into separated CTF event field apart from following exceptions: PERF_SAMPLE_RAW - added in next patch PERF_SAMPLE_READ - TODO PERF_SAMPLE_CALLCHAIN - TODO PERF_SAMPLE_BRANCH_STACK - TODO PERF_SAMPLE_REGS_USER - TODO PERF_SAMPLE_STACK_USER - TODO $ perf --debug=data-convert=2 data convert ... The converted CTF data could be analyzed by CTF tools, like babletrace or tracecompass [1]. $ babeltrace ./ctf-data/ [03:19:13.962125533] (+?.?????????) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 } [03:19:13.962130001] (+0.000004468) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 } [03:19:13.962131936] (+0.000001935) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 8 } [03:19:13.962133732] (+0.000001796) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 114 } [03:19:13.962135557] (+0.000001825) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 2087 } [03:19:13.962137627] (+0.000002070) cycles: { }, { ip = 0xFFFFFFFF81361938, tid = 20714, pid = 20714, period = 37582 } [03:19:13.962161091] (+0.000023464) cycles: { }, { ip = 0xFFFFFFFF8124218F, tid = 20714, pid = 20714, period = 600246 } [03:19:13.962517569] (+0.000356478) cycles: { }, { ip = 0xFFFFFFFF811A75DB, tid = 20714, pid = 20714, period = 1325731 } [03:19:13.969518008] (+0.007000439) cycles: { }, { ip = 0x34080917B2, tid = 20714, pid = 20714, period = 1144298 } The following members to the ctf-environment were decided to be added to distinguish and specify perf CTF data: - domain It says "kernel" because it contains a kernel trace (not to be confused with a user space like lttng-ust does) - tracer_name It says perf. This can be used to distinguish between lttng and perf CTF based trace. - version The kernel version from stream. In addition to release, this is what it looks like on a Debian kernel: release = "3.14-1-amd64"; version = "3.14.0"; [1] http://projects.eclipse.org/projects/tools.tracecompass Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jeremie Galarneau <jgalar@efficios.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1424470628-5969-4-git-send-email-jolsa@kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-20 22:17:00 +00:00
};
perf data: Correct -h output There is currently only 1 'perf data' command, but supporting extra commands was breaking the help output. Simplify for now so that the help output is correct. Before: $ perf data -h Usage: perf data [<common options>] <command> [<options>] $ perf data Usage: perf data [<common options>] <command> [<options>] Available commands: convert - converts data file between formats After: $ perf data Usage: perf data convert [<options>] -f, --force don't complain, do it -i, --input <file> input file name -v, --verbose be more verbose --all Convert all events --to-ctf ... Convert to CTF format --to-json ... Convert to JSON format --tod Convert time to wall clock time $ perf data -h Usage: perf data convert [<options>] -f, --force don't complain, do it -i, --input <file> input file name -v, --verbose be more verbose --all Convert all events --to-ctf ... Convert to CTF format --to-json ... Convert to JSON format --tod Convert time to wall clock time Signed-off-by: Joshua Martinez <joshuamart@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20210824205829.52822-1-irogers@google.com Signed-off-by: Ian Rogers <irogers@google.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-08-24 20:58:29 +00:00
const struct option data_options[] = {
perf data: Add perf data to CTF conversion support Adding 'perf data convert' to convert perf data file into different format. This patch adds support for CTF format conversion. To convert perf.data into CTF run: $ perf data convert --to-ctf=./ctf-data/ [ perf data convert: Converted 'perf.data' into CTF data './ctf-data/' ] [ perf data convert: Converted and wrote 11.268 MB (100230 samples) ] The command will create CTF metadata out of perf.data file (or one specified via -i option) and then convert all sample events into single CTF stream. Each sample_type bit is translated into separated CTF event field apart from following exceptions: PERF_SAMPLE_RAW - added in next patch PERF_SAMPLE_READ - TODO PERF_SAMPLE_CALLCHAIN - TODO PERF_SAMPLE_BRANCH_STACK - TODO PERF_SAMPLE_REGS_USER - TODO PERF_SAMPLE_STACK_USER - TODO $ perf --debug=data-convert=2 data convert ... The converted CTF data could be analyzed by CTF tools, like babletrace or tracecompass [1]. $ babeltrace ./ctf-data/ [03:19:13.962125533] (+?.?????????) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 } [03:19:13.962130001] (+0.000004468) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 } [03:19:13.962131936] (+0.000001935) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 8 } [03:19:13.962133732] (+0.000001796) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 114 } [03:19:13.962135557] (+0.000001825) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 2087 } [03:19:13.962137627] (+0.000002070) cycles: { }, { ip = 0xFFFFFFFF81361938, tid = 20714, pid = 20714, period = 37582 } [03:19:13.962161091] (+0.000023464) cycles: { }, { ip = 0xFFFFFFFF8124218F, tid = 20714, pid = 20714, period = 600246 } [03:19:13.962517569] (+0.000356478) cycles: { }, { ip = 0xFFFFFFFF811A75DB, tid = 20714, pid = 20714, period = 1325731 } [03:19:13.969518008] (+0.007000439) cycles: { }, { ip = 0x34080917B2, tid = 20714, pid = 20714, period = 1144298 } The following members to the ctf-environment were decided to be added to distinguish and specify perf CTF data: - domain It says "kernel" because it contains a kernel trace (not to be confused with a user space like lttng-ust does) - tracer_name It says perf. This can be used to distinguish between lttng and perf CTF based trace. - version The kernel version from stream. In addition to release, this is what it looks like on a Debian kernel: release = "3.14-1-amd64"; version = "3.14.0"; [1] http://projects.eclipse.org/projects/tools.tracecompass Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jeremie Galarneau <jgalar@efficios.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1424470628-5969-4-git-send-email-jolsa@kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-20 22:17:00 +00:00
OPT_INCR('v', "verbose", &verbose, "be more verbose"),
OPT_STRING('i', "input", &input_name, "file", "input file name"),
perf data: Add JSON export This adds a feature to export perf data to JSON. The resolved symbols are exported into the JSON so that external tools don't need to load the dsos themselves (or even have access to them at all.) This makes it easy to load and analyze perf data with standalone tools where direct perf or libbabeltrace integration is impractical. The exporter uses a minimal inline JSON encoding without any external dependencies. Currently it only outputs some headers and sample metadata but it's easily extensible. Use it like this: $ perf data convert --to-json out.json Committer notes: Fixup a __printf() bug that broke the build: util/data-convert-json.c:103:11: error: expected ‘)’ before numeric constant 103 | __(printf, 5, 6) | ^~ | ) util/data-convert-json.c: In function ‘output_sample_callchain_entry’: util/data-convert-json.c:124:2: error: implicit declaration of function ‘output_json_key_format’; did you mean ‘output_json_format’? [-Werror=implicit-function-declaration] 124 | output_json_key_format(out, false, 5, "ip", "\"0x%" PRIx64 "\"", ip); | ^~~~~~~~~~~~~~~~~~~~~~ | output_json_format Also had to add this patch to fix errors reported by various versions of clang: - if (al && al->sym && al->sym->name && strlen(al->sym->name) > 0) { + if (al && al->sym && al->sym->namelen) { al->sym->name is a zero sized array, to avoid one extra alloc in the symbol__new() constructor, sym->namelen carries its strlen. Committer testing: $ ls -la out.json ls: cannot access 'out.json': No such file or directory $ perf record sleep 0.1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.001 MB perf.data (8 samples) ] $ perf report --stats | grep -w SAMPLE SAMPLE events: 8 $ perf data convert --to-json out.json [ perf data convert: Converted 'perf.data' into JSON data 'out.json' ] [ perf data convert: Converted and wrote 0.002 MB (8 samples) ] $ ls -la out.json -rw-rw-r--. 1 acme acme 2017 Apr 26 17:29 out.json $ cat out.json { "linux-perf-json-version": 1, "headers": { "header-version": 1, "captured-on": "2021-04-26T20:28:57Z", "data-offset": 432, "data-size": 1016, "feat-offset": 1448, "hostname": "five", "os-release": "5.11.14-200.fc33.x86_64", "arch": "x86_64", "cpu-desc": "AMD Ryzen 9 3900X 12-Core Processor", "cpuid": "AuthenticAMD,23,113,0", "nrcpus-online": 24, "nrcpus-avail": 24, "perf-version": "5.12.gee134f3189bd", "cmdline": [ "/home/acme/bin/perf", "record", "sleep", "0.1" ] }, "samples": [ { "timestamp": 170517539043684, "pid": 375844, "tid": 375844, "comm": "sleep", "callchain": [ { "ip": "0xffffffffa6268827" } ] }, { "timestamp": 170517539048443, "pid": 375844, "tid": 375844, "comm": "sleep", "callchain": [ { "ip": "0xffffffffa661359d" } ] }, { "timestamp": 170517539051018, "pid": 375844, "tid": 375844, "comm": "sleep", "callchain": [ { "ip": "0xffffffffa6311e18" } ] }, { "timestamp": 170517539053652, "pid": 375844, "tid": 375844, "comm": "sleep", "callchain": [ { "ip": "0x7fdb77b4812b", "symbol": "_dl_start", "dso": "ld-2.32.so" } ] }, { "timestamp": 170517539055306, "pid": 375844, "tid": 375844, "comm": "sleep", "callchain": [ { "ip": "0xffffffffa6269286" } ] }, { "timestamp": 170517539057590, "pid": 375844, "tid": 375844, "comm": "sleep", "callchain": [ { "ip": "0xffffffffa62abd8b" } ] }, { "timestamp": 170517539067559, "pid": 375844, "tid": 375844, "comm": "sleep", "callchain": [ { "ip": "0x7fdb77b5e9e9", "symbol": "__GI___tunables_init", "dso": "ld-2.32.so" } ] }, { "timestamp": 170517539282452, "pid": 375844, "tid": 375844, "comm": "sleep", "callchain": [ { "ip": "0x7fdb779978d2", "symbol": "getenv", "dso": "libc-2.32.so" } ] } ] } $ Signed-off-by: Nicholas Fraser <nfraser@codeweavers.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Changbin Du <changbin.du@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tan Xiaojun <tanxiaojun@huawei.com> Cc: Ulrich Czekalla <uczekalla@codeweavers.com> Link: http://lore.kernel.org/lkml/3884969f-804d-2f53-c648-e2b0bd85edff@codeweavers.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-26 14:47:16 +00:00
OPT_STRING(0, "to-json", &to_json, NULL, "Convert to JSON format"),
perf data: Add perf data to CTF conversion support Adding 'perf data convert' to convert perf data file into different format. This patch adds support for CTF format conversion. To convert perf.data into CTF run: $ perf data convert --to-ctf=./ctf-data/ [ perf data convert: Converted 'perf.data' into CTF data './ctf-data/' ] [ perf data convert: Converted and wrote 11.268 MB (100230 samples) ] The command will create CTF metadata out of perf.data file (or one specified via -i option) and then convert all sample events into single CTF stream. Each sample_type bit is translated into separated CTF event field apart from following exceptions: PERF_SAMPLE_RAW - added in next patch PERF_SAMPLE_READ - TODO PERF_SAMPLE_CALLCHAIN - TODO PERF_SAMPLE_BRANCH_STACK - TODO PERF_SAMPLE_REGS_USER - TODO PERF_SAMPLE_STACK_USER - TODO $ perf --debug=data-convert=2 data convert ... The converted CTF data could be analyzed by CTF tools, like babletrace or tracecompass [1]. $ babeltrace ./ctf-data/ [03:19:13.962125533] (+?.?????????) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 } [03:19:13.962130001] (+0.000004468) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 } [03:19:13.962131936] (+0.000001935) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 8 } [03:19:13.962133732] (+0.000001796) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 114 } [03:19:13.962135557] (+0.000001825) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 2087 } [03:19:13.962137627] (+0.000002070) cycles: { }, { ip = 0xFFFFFFFF81361938, tid = 20714, pid = 20714, period = 37582 } [03:19:13.962161091] (+0.000023464) cycles: { }, { ip = 0xFFFFFFFF8124218F, tid = 20714, pid = 20714, period = 600246 } [03:19:13.962517569] (+0.000356478) cycles: { }, { ip = 0xFFFFFFFF811A75DB, tid = 20714, pid = 20714, period = 1325731 } [03:19:13.969518008] (+0.007000439) cycles: { }, { ip = 0x34080917B2, tid = 20714, pid = 20714, period = 1144298 } The following members to the ctf-environment were decided to be added to distinguish and specify perf CTF data: - domain It says "kernel" because it contains a kernel trace (not to be confused with a user space like lttng-ust does) - tracer_name It says perf. This can be used to distinguish between lttng and perf CTF based trace. - version The kernel version from stream. In addition to release, this is what it looks like on a Debian kernel: release = "3.14-1-amd64"; version = "3.14.0"; [1] http://projects.eclipse.org/projects/tools.tracecompass Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jeremie Galarneau <jgalar@efficios.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1424470628-5969-4-git-send-email-jolsa@kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-20 22:17:00 +00:00
#ifdef HAVE_LIBBABELTRACE_SUPPORT
OPT_STRING(0, "to-ctf", &to_ctf, NULL, "Convert to CTF format"),
perf data: Add support to store time of day in CTF data conversion Adad support to convert and store time of day in CTF data conversion for 'perf data convert' subcommand. The perf.data used for conversion needs to have clock data information - must be recorded with -k/--clockid option). New --tod option is added to 'perf data convert' subcommand to convert data with timestamps converted to wall clock time. Record data with clockid set: # perf record -k CLOCK_MONOTONIC kill kill: not enough arguments [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.033 MB perf.data (8 samples) ] Convert data with TOD timestamps: # perf data convert --tod --to-ctf ./ctf [ perf data convert: Converted 'perf.data' into CTF data './ctf' ] [ perf data convert: Converted and wrote 0.000 MB (8 samples) ] Display data in perf script: # perf script -F+tod --ns perf 262150 2020-07-13 18:38:50.097678523 153633.958246159: 1 cycles: ... perf 262150 2020-07-13 18:38:50.097682941 153633.958250577: 1 cycles: ... perf 262150 2020-07-13 18:38:50.097684997 153633.958252633: 7 cycles: ... ... Display data in babeltrace: # babeltrace --clock-date ./ctf [2020-07-13 18:38:50.097678523] (+?.?????????) cycles: { cpu_id = 0 }, { perf_ip = 0xFFF ... [2020-07-13 18:38:50.097682941] (+0.000004418) cycles: { cpu_id = 0 }, { perf_ip = 0xFFF ... [2020-07-13 18:38:50.097684997] (+0.000002056) cycles: { cpu_id = 0 }, { perf_ip = 0xFFF ... ... It's available only for recording with clockid specified, because it's the only case where we can get reference time to wallclock time. It's can't do that with perf clock yet. Error is display if you want to use --tod on data without clockid specified: # perf data convert --tod --to-ctf ./ctf Can't provide --tod time, missing clock data. Please record with -k/--clockid option. Failed to setup CTF writer. Error during conversion setup. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Geneviève Bastien <gbastien@versatic.net> Cc: Ian Rogers <irogers@google.com> Cc: Jeremie Galarneau <jgalar@efficios.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lore.kernel.org/lkml/20200805093444.314999-6-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-05 09:34:42 +00:00
OPT_BOOLEAN(0, "tod", &opts.tod, "Convert time to wall clock time"),
perf data: Add perf data to CTF conversion support Adding 'perf data convert' to convert perf data file into different format. This patch adds support for CTF format conversion. To convert perf.data into CTF run: $ perf data convert --to-ctf=./ctf-data/ [ perf data convert: Converted 'perf.data' into CTF data './ctf-data/' ] [ perf data convert: Converted and wrote 11.268 MB (100230 samples) ] The command will create CTF metadata out of perf.data file (or one specified via -i option) and then convert all sample events into single CTF stream. Each sample_type bit is translated into separated CTF event field apart from following exceptions: PERF_SAMPLE_RAW - added in next patch PERF_SAMPLE_READ - TODO PERF_SAMPLE_CALLCHAIN - TODO PERF_SAMPLE_BRANCH_STACK - TODO PERF_SAMPLE_REGS_USER - TODO PERF_SAMPLE_STACK_USER - TODO $ perf --debug=data-convert=2 data convert ... The converted CTF data could be analyzed by CTF tools, like babletrace or tracecompass [1]. $ babeltrace ./ctf-data/ [03:19:13.962125533] (+?.?????????) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 } [03:19:13.962130001] (+0.000004468) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 } [03:19:13.962131936] (+0.000001935) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 8 } [03:19:13.962133732] (+0.000001796) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 114 } [03:19:13.962135557] (+0.000001825) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 2087 } [03:19:13.962137627] (+0.000002070) cycles: { }, { ip = 0xFFFFFFFF81361938, tid = 20714, pid = 20714, period = 37582 } [03:19:13.962161091] (+0.000023464) cycles: { }, { ip = 0xFFFFFFFF8124218F, tid = 20714, pid = 20714, period = 600246 } [03:19:13.962517569] (+0.000356478) cycles: { }, { ip = 0xFFFFFFFF811A75DB, tid = 20714, pid = 20714, period = 1325731 } [03:19:13.969518008] (+0.007000439) cycles: { }, { ip = 0x34080917B2, tid = 20714, pid = 20714, period = 1144298 } The following members to the ctf-environment were decided to be added to distinguish and specify perf CTF data: - domain It says "kernel" because it contains a kernel trace (not to be confused with a user space like lttng-ust does) - tracer_name It says perf. This can be used to distinguish between lttng and perf CTF based trace. - version The kernel version from stream. In addition to release, this is what it looks like on a Debian kernel: release = "3.14-1-amd64"; version = "3.14.0"; [1] http://projects.eclipse.org/projects/tools.tracecompass Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jeremie Galarneau <jgalar@efficios.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1424470628-5969-4-git-send-email-jolsa@kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-20 22:17:00 +00:00
#endif
OPT_BOOLEAN('f', "force", &opts.force, "don't complain, do it"),
perf data ctf: Add '--all' option for 'perf data convert' After this patch, 'perf data convert' convert comm events to output CTF stream. Result: # perf record -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.378 MB perf.data (73 samples) ] # perf data convert --to-ctf ./out.ctf [ perf data convert: Converted 'perf.data' into CTF data './out.ctf' ] [ perf data convert: Converted and wrote 0.003 MB (73 samples) ] # babeltrace --clock-seconds ./out.ctf/ [10627.402515791] (+?.?????????) cycles:ppp: { cpu_id = 0 }, { perf_ip = 0xFFFFFFFF81065AF4, perf_tid = 0, perf_pid = 0, perf_period = 1 } [10627.402518972] (+0.000003181) cycles:ppp: { cpu_id = 0 }, { perf_ip = 0xFFFFFFFF81065AF4, perf_tid = 0, perf_pid = 0, perf_period = 1 } ... // only sample event is converted # perf data convert --all --to-ctf ./out.ctf [ perf data convert: Converted 'perf.data' into CTF data './out.ctf' ] [ perf data convert: Converted and wrote 0.023 MB (73 samples, 384 non-samples) ] # babeltrace --clock-seconds ./out.ctf/ [ 0.000000000] (+?.?????????) perf_comm: { cpu_id = 0 }, { pid = 1, tid = 1, comm = "init" } [ 0.000000000] (+0.000000000) perf_comm: { cpu_id = 0 }, { pid = 2, tid = 2, comm = "kthreadd" } [ 0.000000000] (+0.000000000) perf_comm: { cpu_id = 0 }, { pid = 3, tid = 3, comm = "ksoftirqd/0" } ... // comm events are converted [10627.402515791] (+10627.402515791) cycles:ppp: { cpu_id = 0 }, { perf_ip = 0xFFFFFFFF81065AF4, perf_tid = 0, perf_pid = 0, perf_period = 1 } [10627.402518972] (+0.000003181) cycles:ppp: { cpu_id = 0 }, { perf_ip = 0xFFFFFFFF81065AF4, perf_tid = 0, perf_pid = 0, perf_period = 1 } ... // samples are also converted Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1466767332-114472-7-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-24 11:22:11 +00:00
OPT_BOOLEAN(0, "all", &opts.all, "Convert all events"),
perf data: Add perf data to CTF conversion support Adding 'perf data convert' to convert perf data file into different format. This patch adds support for CTF format conversion. To convert perf.data into CTF run: $ perf data convert --to-ctf=./ctf-data/ [ perf data convert: Converted 'perf.data' into CTF data './ctf-data/' ] [ perf data convert: Converted and wrote 11.268 MB (100230 samples) ] The command will create CTF metadata out of perf.data file (or one specified via -i option) and then convert all sample events into single CTF stream. Each sample_type bit is translated into separated CTF event field apart from following exceptions: PERF_SAMPLE_RAW - added in next patch PERF_SAMPLE_READ - TODO PERF_SAMPLE_CALLCHAIN - TODO PERF_SAMPLE_BRANCH_STACK - TODO PERF_SAMPLE_REGS_USER - TODO PERF_SAMPLE_STACK_USER - TODO $ perf --debug=data-convert=2 data convert ... The converted CTF data could be analyzed by CTF tools, like babletrace or tracecompass [1]. $ babeltrace ./ctf-data/ [03:19:13.962125533] (+?.?????????) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 } [03:19:13.962130001] (+0.000004468) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 } [03:19:13.962131936] (+0.000001935) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 8 } [03:19:13.962133732] (+0.000001796) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 114 } [03:19:13.962135557] (+0.000001825) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 2087 } [03:19:13.962137627] (+0.000002070) cycles: { }, { ip = 0xFFFFFFFF81361938, tid = 20714, pid = 20714, period = 37582 } [03:19:13.962161091] (+0.000023464) cycles: { }, { ip = 0xFFFFFFFF8124218F, tid = 20714, pid = 20714, period = 600246 } [03:19:13.962517569] (+0.000356478) cycles: { }, { ip = 0xFFFFFFFF811A75DB, tid = 20714, pid = 20714, period = 1325731 } [03:19:13.969518008] (+0.007000439) cycles: { }, { ip = 0x34080917B2, tid = 20714, pid = 20714, period = 1144298 } The following members to the ctf-environment were decided to be added to distinguish and specify perf CTF data: - domain It says "kernel" because it contains a kernel trace (not to be confused with a user space like lttng-ust does) - tracer_name It says perf. This can be used to distinguish between lttng and perf CTF based trace. - version The kernel version from stream. In addition to release, this is what it looks like on a Debian kernel: release = "3.14-1-amd64"; version = "3.14.0"; [1] http://projects.eclipse.org/projects/tools.tracecompass Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jeremie Galarneau <jgalar@efficios.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1424470628-5969-4-git-send-email-jolsa@kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-20 22:17:00 +00:00
OPT_END()
};
perf data: Correct -h output There is currently only 1 'perf data' command, but supporting extra commands was breaking the help output. Simplify for now so that the help output is correct. Before: $ perf data -h Usage: perf data [<common options>] <command> [<options>] $ perf data Usage: perf data [<common options>] <command> [<options>] Available commands: convert - converts data file between formats After: $ perf data Usage: perf data convert [<options>] -f, --force don't complain, do it -i, --input <file> input file name -v, --verbose be more verbose --all Convert all events --to-ctf ... Convert to CTF format --to-json ... Convert to JSON format --tod Convert time to wall clock time $ perf data -h Usage: perf data convert [<options>] -f, --force don't complain, do it -i, --input <file> input file name -v, --verbose be more verbose --all Convert all events --to-ctf ... Convert to CTF format --to-json ... Convert to JSON format --tod Convert time to wall clock time Signed-off-by: Joshua Martinez <joshuamart@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20210824205829.52822-1-irogers@google.com Signed-off-by: Ian Rogers <irogers@google.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-08-24 20:58:29 +00:00
static int cmd_data_convert(int argc, const char **argv)
{
argc = parse_options(argc, argv, data_options,
data_usage, 0);
perf data: Add perf data to CTF conversion support Adding 'perf data convert' to convert perf data file into different format. This patch adds support for CTF format conversion. To convert perf.data into CTF run: $ perf data convert --to-ctf=./ctf-data/ [ perf data convert: Converted 'perf.data' into CTF data './ctf-data/' ] [ perf data convert: Converted and wrote 11.268 MB (100230 samples) ] The command will create CTF metadata out of perf.data file (or one specified via -i option) and then convert all sample events into single CTF stream. Each sample_type bit is translated into separated CTF event field apart from following exceptions: PERF_SAMPLE_RAW - added in next patch PERF_SAMPLE_READ - TODO PERF_SAMPLE_CALLCHAIN - TODO PERF_SAMPLE_BRANCH_STACK - TODO PERF_SAMPLE_REGS_USER - TODO PERF_SAMPLE_STACK_USER - TODO $ perf --debug=data-convert=2 data convert ... The converted CTF data could be analyzed by CTF tools, like babletrace or tracecompass [1]. $ babeltrace ./ctf-data/ [03:19:13.962125533] (+?.?????????) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 } [03:19:13.962130001] (+0.000004468) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 } [03:19:13.962131936] (+0.000001935) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 8 } [03:19:13.962133732] (+0.000001796) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 114 } [03:19:13.962135557] (+0.000001825) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 2087 } [03:19:13.962137627] (+0.000002070) cycles: { }, { ip = 0xFFFFFFFF81361938, tid = 20714, pid = 20714, period = 37582 } [03:19:13.962161091] (+0.000023464) cycles: { }, { ip = 0xFFFFFFFF8124218F, tid = 20714, pid = 20714, period = 600246 } [03:19:13.962517569] (+0.000356478) cycles: { }, { ip = 0xFFFFFFFF811A75DB, tid = 20714, pid = 20714, period = 1325731 } [03:19:13.969518008] (+0.007000439) cycles: { }, { ip = 0x34080917B2, tid = 20714, pid = 20714, period = 1144298 } The following members to the ctf-environment were decided to be added to distinguish and specify perf CTF data: - domain It says "kernel" because it contains a kernel trace (not to be confused with a user space like lttng-ust does) - tracer_name It says perf. This can be used to distinguish between lttng and perf CTF based trace. - version The kernel version from stream. In addition to release, this is what it looks like on a Debian kernel: release = "3.14-1-amd64"; version = "3.14.0"; [1] http://projects.eclipse.org/projects/tools.tracecompass Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jeremie Galarneau <jgalar@efficios.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1424470628-5969-4-git-send-email-jolsa@kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-20 22:17:00 +00:00
if (argc) {
perf data: Correct -h output There is currently only 1 'perf data' command, but supporting extra commands was breaking the help output. Simplify for now so that the help output is correct. Before: $ perf data -h Usage: perf data [<common options>] <command> [<options>] $ perf data Usage: perf data [<common options>] <command> [<options>] Available commands: convert - converts data file between formats After: $ perf data Usage: perf data convert [<options>] -f, --force don't complain, do it -i, --input <file> input file name -v, --verbose be more verbose --all Convert all events --to-ctf ... Convert to CTF format --to-json ... Convert to JSON format --tod Convert time to wall clock time $ perf data -h Usage: perf data convert [<options>] -f, --force don't complain, do it -i, --input <file> input file name -v, --verbose be more verbose --all Convert all events --to-ctf ... Convert to CTF format --to-json ... Convert to JSON format --tod Convert time to wall clock time Signed-off-by: Joshua Martinez <joshuamart@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20210824205829.52822-1-irogers@google.com Signed-off-by: Ian Rogers <irogers@google.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-08-24 20:58:29 +00:00
usage_with_options(data_usage, data_options);
perf data: Add perf data to CTF conversion support Adding 'perf data convert' to convert perf data file into different format. This patch adds support for CTF format conversion. To convert perf.data into CTF run: $ perf data convert --to-ctf=./ctf-data/ [ perf data convert: Converted 'perf.data' into CTF data './ctf-data/' ] [ perf data convert: Converted and wrote 11.268 MB (100230 samples) ] The command will create CTF metadata out of perf.data file (or one specified via -i option) and then convert all sample events into single CTF stream. Each sample_type bit is translated into separated CTF event field apart from following exceptions: PERF_SAMPLE_RAW - added in next patch PERF_SAMPLE_READ - TODO PERF_SAMPLE_CALLCHAIN - TODO PERF_SAMPLE_BRANCH_STACK - TODO PERF_SAMPLE_REGS_USER - TODO PERF_SAMPLE_STACK_USER - TODO $ perf --debug=data-convert=2 data convert ... The converted CTF data could be analyzed by CTF tools, like babletrace or tracecompass [1]. $ babeltrace ./ctf-data/ [03:19:13.962125533] (+?.?????????) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 } [03:19:13.962130001] (+0.000004468) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 } [03:19:13.962131936] (+0.000001935) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 8 } [03:19:13.962133732] (+0.000001796) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 114 } [03:19:13.962135557] (+0.000001825) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 2087 } [03:19:13.962137627] (+0.000002070) cycles: { }, { ip = 0xFFFFFFFF81361938, tid = 20714, pid = 20714, period = 37582 } [03:19:13.962161091] (+0.000023464) cycles: { }, { ip = 0xFFFFFFFF8124218F, tid = 20714, pid = 20714, period = 600246 } [03:19:13.962517569] (+0.000356478) cycles: { }, { ip = 0xFFFFFFFF811A75DB, tid = 20714, pid = 20714, period = 1325731 } [03:19:13.969518008] (+0.007000439) cycles: { }, { ip = 0x34080917B2, tid = 20714, pid = 20714, period = 1144298 } The following members to the ctf-environment were decided to be added to distinguish and specify perf CTF data: - domain It says "kernel" because it contains a kernel trace (not to be confused with a user space like lttng-ust does) - tracer_name It says perf. This can be used to distinguish between lttng and perf CTF based trace. - version The kernel version from stream. In addition to release, this is what it looks like on a Debian kernel: release = "3.14-1-amd64"; version = "3.14.0"; [1] http://projects.eclipse.org/projects/tools.tracecompass Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jeremie Galarneau <jgalar@efficios.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1424470628-5969-4-git-send-email-jolsa@kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-20 22:17:00 +00:00
return -1;
}
perf data: Add JSON export This adds a feature to export perf data to JSON. The resolved symbols are exported into the JSON so that external tools don't need to load the dsos themselves (or even have access to them at all.) This makes it easy to load and analyze perf data with standalone tools where direct perf or libbabeltrace integration is impractical. The exporter uses a minimal inline JSON encoding without any external dependencies. Currently it only outputs some headers and sample metadata but it's easily extensible. Use it like this: $ perf data convert --to-json out.json Committer notes: Fixup a __printf() bug that broke the build: util/data-convert-json.c:103:11: error: expected ‘)’ before numeric constant 103 | __(printf, 5, 6) | ^~ | ) util/data-convert-json.c: In function ‘output_sample_callchain_entry’: util/data-convert-json.c:124:2: error: implicit declaration of function ‘output_json_key_format’; did you mean ‘output_json_format’? [-Werror=implicit-function-declaration] 124 | output_json_key_format(out, false, 5, "ip", "\"0x%" PRIx64 "\"", ip); | ^~~~~~~~~~~~~~~~~~~~~~ | output_json_format Also had to add this patch to fix errors reported by various versions of clang: - if (al && al->sym && al->sym->name && strlen(al->sym->name) > 0) { + if (al && al->sym && al->sym->namelen) { al->sym->name is a zero sized array, to avoid one extra alloc in the symbol__new() constructor, sym->namelen carries its strlen. Committer testing: $ ls -la out.json ls: cannot access 'out.json': No such file or directory $ perf record sleep 0.1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.001 MB perf.data (8 samples) ] $ perf report --stats | grep -w SAMPLE SAMPLE events: 8 $ perf data convert --to-json out.json [ perf data convert: Converted 'perf.data' into JSON data 'out.json' ] [ perf data convert: Converted and wrote 0.002 MB (8 samples) ] $ ls -la out.json -rw-rw-r--. 1 acme acme 2017 Apr 26 17:29 out.json $ cat out.json { "linux-perf-json-version": 1, "headers": { "header-version": 1, "captured-on": "2021-04-26T20:28:57Z", "data-offset": 432, "data-size": 1016, "feat-offset": 1448, "hostname": "five", "os-release": "5.11.14-200.fc33.x86_64", "arch": "x86_64", "cpu-desc": "AMD Ryzen 9 3900X 12-Core Processor", "cpuid": "AuthenticAMD,23,113,0", "nrcpus-online": 24, "nrcpus-avail": 24, "perf-version": "5.12.gee134f3189bd", "cmdline": [ "/home/acme/bin/perf", "record", "sleep", "0.1" ] }, "samples": [ { "timestamp": 170517539043684, "pid": 375844, "tid": 375844, "comm": "sleep", "callchain": [ { "ip": "0xffffffffa6268827" } ] }, { "timestamp": 170517539048443, "pid": 375844, "tid": 375844, "comm": "sleep", "callchain": [ { "ip": "0xffffffffa661359d" } ] }, { "timestamp": 170517539051018, "pid": 375844, "tid": 375844, "comm": "sleep", "callchain": [ { "ip": "0xffffffffa6311e18" } ] }, { "timestamp": 170517539053652, "pid": 375844, "tid": 375844, "comm": "sleep", "callchain": [ { "ip": "0x7fdb77b4812b", "symbol": "_dl_start", "dso": "ld-2.32.so" } ] }, { "timestamp": 170517539055306, "pid": 375844, "tid": 375844, "comm": "sleep", "callchain": [ { "ip": "0xffffffffa6269286" } ] }, { "timestamp": 170517539057590, "pid": 375844, "tid": 375844, "comm": "sleep", "callchain": [ { "ip": "0xffffffffa62abd8b" } ] }, { "timestamp": 170517539067559, "pid": 375844, "tid": 375844, "comm": "sleep", "callchain": [ { "ip": "0x7fdb77b5e9e9", "symbol": "__GI___tunables_init", "dso": "ld-2.32.so" } ] }, { "timestamp": 170517539282452, "pid": 375844, "tid": 375844, "comm": "sleep", "callchain": [ { "ip": "0x7fdb779978d2", "symbol": "getenv", "dso": "libc-2.32.so" } ] } ] } $ Signed-off-by: Nicholas Fraser <nfraser@codeweavers.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Changbin Du <changbin.du@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tan Xiaojun <tanxiaojun@huawei.com> Cc: Ulrich Czekalla <uczekalla@codeweavers.com> Link: http://lore.kernel.org/lkml/3884969f-804d-2f53-c648-e2b0bd85edff@codeweavers.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-26 14:47:16 +00:00
if (to_json && to_ctf) {
pr_err("You cannot specify both --to-ctf and --to-json.\n");
return -1;
}
#ifdef HAVE_LIBBABELTRACE_SUPPORT
perf data: Add JSON export This adds a feature to export perf data to JSON. The resolved symbols are exported into the JSON so that external tools don't need to load the dsos themselves (or even have access to them at all.) This makes it easy to load and analyze perf data with standalone tools where direct perf or libbabeltrace integration is impractical. The exporter uses a minimal inline JSON encoding without any external dependencies. Currently it only outputs some headers and sample metadata but it's easily extensible. Use it like this: $ perf data convert --to-json out.json Committer notes: Fixup a __printf() bug that broke the build: util/data-convert-json.c:103:11: error: expected ‘)’ before numeric constant 103 | __(printf, 5, 6) | ^~ | ) util/data-convert-json.c: In function ‘output_sample_callchain_entry’: util/data-convert-json.c:124:2: error: implicit declaration of function ‘output_json_key_format’; did you mean ‘output_json_format’? [-Werror=implicit-function-declaration] 124 | output_json_key_format(out, false, 5, "ip", "\"0x%" PRIx64 "\"", ip); | ^~~~~~~~~~~~~~~~~~~~~~ | output_json_format Also had to add this patch to fix errors reported by various versions of clang: - if (al && al->sym && al->sym->name && strlen(al->sym->name) > 0) { + if (al && al->sym && al->sym->namelen) { al->sym->name is a zero sized array, to avoid one extra alloc in the symbol__new() constructor, sym->namelen carries its strlen. Committer testing: $ ls -la out.json ls: cannot access 'out.json': No such file or directory $ perf record sleep 0.1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.001 MB perf.data (8 samples) ] $ perf report --stats | grep -w SAMPLE SAMPLE events: 8 $ perf data convert --to-json out.json [ perf data convert: Converted 'perf.data' into JSON data 'out.json' ] [ perf data convert: Converted and wrote 0.002 MB (8 samples) ] $ ls -la out.json -rw-rw-r--. 1 acme acme 2017 Apr 26 17:29 out.json $ cat out.json { "linux-perf-json-version": 1, "headers": { "header-version": 1, "captured-on": "2021-04-26T20:28:57Z", "data-offset": 432, "data-size": 1016, "feat-offset": 1448, "hostname": "five", "os-release": "5.11.14-200.fc33.x86_64", "arch": "x86_64", "cpu-desc": "AMD Ryzen 9 3900X 12-Core Processor", "cpuid": "AuthenticAMD,23,113,0", "nrcpus-online": 24, "nrcpus-avail": 24, "perf-version": "5.12.gee134f3189bd", "cmdline": [ "/home/acme/bin/perf", "record", "sleep", "0.1" ] }, "samples": [ { "timestamp": 170517539043684, "pid": 375844, "tid": 375844, "comm": "sleep", "callchain": [ { "ip": "0xffffffffa6268827" } ] }, { "timestamp": 170517539048443, "pid": 375844, "tid": 375844, "comm": "sleep", "callchain": [ { "ip": "0xffffffffa661359d" } ] }, { "timestamp": 170517539051018, "pid": 375844, "tid": 375844, "comm": "sleep", "callchain": [ { "ip": "0xffffffffa6311e18" } ] }, { "timestamp": 170517539053652, "pid": 375844, "tid": 375844, "comm": "sleep", "callchain": [ { "ip": "0x7fdb77b4812b", "symbol": "_dl_start", "dso": "ld-2.32.so" } ] }, { "timestamp": 170517539055306, "pid": 375844, "tid": 375844, "comm": "sleep", "callchain": [ { "ip": "0xffffffffa6269286" } ] }, { "timestamp": 170517539057590, "pid": 375844, "tid": 375844, "comm": "sleep", "callchain": [ { "ip": "0xffffffffa62abd8b" } ] }, { "timestamp": 170517539067559, "pid": 375844, "tid": 375844, "comm": "sleep", "callchain": [ { "ip": "0x7fdb77b5e9e9", "symbol": "__GI___tunables_init", "dso": "ld-2.32.so" } ] }, { "timestamp": 170517539282452, "pid": 375844, "tid": 375844, "comm": "sleep", "callchain": [ { "ip": "0x7fdb779978d2", "symbol": "getenv", "dso": "libc-2.32.so" } ] } ] } $ Signed-off-by: Nicholas Fraser <nfraser@codeweavers.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Changbin Du <changbin.du@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tan Xiaojun <tanxiaojun@huawei.com> Cc: Ulrich Czekalla <uczekalla@codeweavers.com> Link: http://lore.kernel.org/lkml/3884969f-804d-2f53-c648-e2b0bd85edff@codeweavers.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-26 14:47:16 +00:00
if (!to_json && !to_ctf) {
pr_err("You must specify one of --to-ctf or --to-json.\n");
return -1;
}
#else
if (!to_json) {
pr_err("You must specify --to-json.\n");
return -1;
}
#endif
perf data: Add JSON export This adds a feature to export perf data to JSON. The resolved symbols are exported into the JSON so that external tools don't need to load the dsos themselves (or even have access to them at all.) This makes it easy to load and analyze perf data with standalone tools where direct perf or libbabeltrace integration is impractical. The exporter uses a minimal inline JSON encoding without any external dependencies. Currently it only outputs some headers and sample metadata but it's easily extensible. Use it like this: $ perf data convert --to-json out.json Committer notes: Fixup a __printf() bug that broke the build: util/data-convert-json.c:103:11: error: expected ‘)’ before numeric constant 103 | __(printf, 5, 6) | ^~ | ) util/data-convert-json.c: In function ‘output_sample_callchain_entry’: util/data-convert-json.c:124:2: error: implicit declaration of function ‘output_json_key_format’; did you mean ‘output_json_format’? [-Werror=implicit-function-declaration] 124 | output_json_key_format(out, false, 5, "ip", "\"0x%" PRIx64 "\"", ip); | ^~~~~~~~~~~~~~~~~~~~~~ | output_json_format Also had to add this patch to fix errors reported by various versions of clang: - if (al && al->sym && al->sym->name && strlen(al->sym->name) > 0) { + if (al && al->sym && al->sym->namelen) { al->sym->name is a zero sized array, to avoid one extra alloc in the symbol__new() constructor, sym->namelen carries its strlen. Committer testing: $ ls -la out.json ls: cannot access 'out.json': No such file or directory $ perf record sleep 0.1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.001 MB perf.data (8 samples) ] $ perf report --stats | grep -w SAMPLE SAMPLE events: 8 $ perf data convert --to-json out.json [ perf data convert: Converted 'perf.data' into JSON data 'out.json' ] [ perf data convert: Converted and wrote 0.002 MB (8 samples) ] $ ls -la out.json -rw-rw-r--. 1 acme acme 2017 Apr 26 17:29 out.json $ cat out.json { "linux-perf-json-version": 1, "headers": { "header-version": 1, "captured-on": "2021-04-26T20:28:57Z", "data-offset": 432, "data-size": 1016, "feat-offset": 1448, "hostname": "five", "os-release": "5.11.14-200.fc33.x86_64", "arch": "x86_64", "cpu-desc": "AMD Ryzen 9 3900X 12-Core Processor", "cpuid": "AuthenticAMD,23,113,0", "nrcpus-online": 24, "nrcpus-avail": 24, "perf-version": "5.12.gee134f3189bd", "cmdline": [ "/home/acme/bin/perf", "record", "sleep", "0.1" ] }, "samples": [ { "timestamp": 170517539043684, "pid": 375844, "tid": 375844, "comm": "sleep", "callchain": [ { "ip": "0xffffffffa6268827" } ] }, { "timestamp": 170517539048443, "pid": 375844, "tid": 375844, "comm": "sleep", "callchain": [ { "ip": "0xffffffffa661359d" } ] }, { "timestamp": 170517539051018, "pid": 375844, "tid": 375844, "comm": "sleep", "callchain": [ { "ip": "0xffffffffa6311e18" } ] }, { "timestamp": 170517539053652, "pid": 375844, "tid": 375844, "comm": "sleep", "callchain": [ { "ip": "0x7fdb77b4812b", "symbol": "_dl_start", "dso": "ld-2.32.so" } ] }, { "timestamp": 170517539055306, "pid": 375844, "tid": 375844, "comm": "sleep", "callchain": [ { "ip": "0xffffffffa6269286" } ] }, { "timestamp": 170517539057590, "pid": 375844, "tid": 375844, "comm": "sleep", "callchain": [ { "ip": "0xffffffffa62abd8b" } ] }, { "timestamp": 170517539067559, "pid": 375844, "tid": 375844, "comm": "sleep", "callchain": [ { "ip": "0x7fdb77b5e9e9", "symbol": "__GI___tunables_init", "dso": "ld-2.32.so" } ] }, { "timestamp": 170517539282452, "pid": 375844, "tid": 375844, "comm": "sleep", "callchain": [ { "ip": "0x7fdb779978d2", "symbol": "getenv", "dso": "libc-2.32.so" } ] } ] } $ Signed-off-by: Nicholas Fraser <nfraser@codeweavers.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Changbin Du <changbin.du@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tan Xiaojun <tanxiaojun@huawei.com> Cc: Ulrich Czekalla <uczekalla@codeweavers.com> Link: http://lore.kernel.org/lkml/3884969f-804d-2f53-c648-e2b0bd85edff@codeweavers.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-26 14:47:16 +00:00
if (to_json)
return bt_convert__perf2json(input_name, to_json, &opts);
perf data: Add perf data to CTF conversion support Adding 'perf data convert' to convert perf data file into different format. This patch adds support for CTF format conversion. To convert perf.data into CTF run: $ perf data convert --to-ctf=./ctf-data/ [ perf data convert: Converted 'perf.data' into CTF data './ctf-data/' ] [ perf data convert: Converted and wrote 11.268 MB (100230 samples) ] The command will create CTF metadata out of perf.data file (or one specified via -i option) and then convert all sample events into single CTF stream. Each sample_type bit is translated into separated CTF event field apart from following exceptions: PERF_SAMPLE_RAW - added in next patch PERF_SAMPLE_READ - TODO PERF_SAMPLE_CALLCHAIN - TODO PERF_SAMPLE_BRANCH_STACK - TODO PERF_SAMPLE_REGS_USER - TODO PERF_SAMPLE_STACK_USER - TODO $ perf --debug=data-convert=2 data convert ... The converted CTF data could be analyzed by CTF tools, like babletrace or tracecompass [1]. $ babeltrace ./ctf-data/ [03:19:13.962125533] (+?.?????????) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 } [03:19:13.962130001] (+0.000004468) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 } [03:19:13.962131936] (+0.000001935) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 8 } [03:19:13.962133732] (+0.000001796) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 114 } [03:19:13.962135557] (+0.000001825) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 2087 } [03:19:13.962137627] (+0.000002070) cycles: { }, { ip = 0xFFFFFFFF81361938, tid = 20714, pid = 20714, period = 37582 } [03:19:13.962161091] (+0.000023464) cycles: { }, { ip = 0xFFFFFFFF8124218F, tid = 20714, pid = 20714, period = 600246 } [03:19:13.962517569] (+0.000356478) cycles: { }, { ip = 0xFFFFFFFF811A75DB, tid = 20714, pid = 20714, period = 1325731 } [03:19:13.969518008] (+0.007000439) cycles: { }, { ip = 0x34080917B2, tid = 20714, pid = 20714, period = 1144298 } The following members to the ctf-environment were decided to be added to distinguish and specify perf CTF data: - domain It says "kernel" because it contains a kernel trace (not to be confused with a user space like lttng-ust does) - tracer_name It says perf. This can be used to distinguish between lttng and perf CTF based trace. - version The kernel version from stream. In addition to release, this is what it looks like on a Debian kernel: release = "3.14-1-amd64"; version = "3.14.0"; [1] http://projects.eclipse.org/projects/tools.tracecompass Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jeremie Galarneau <jgalar@efficios.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1424470628-5969-4-git-send-email-jolsa@kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-20 22:17:00 +00:00
if (to_ctf) {
perf build: Use libtraceevent from the system Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command line variables. If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the build, don't compile in libtraceevent and libtracefs support. This also disables CONFIG_TRACE that controls "perf trace". CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles, HAVE_LIBTRACEEVENT is used in C code. Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the commands kmem, kwork, lock, sched and timechart are removed. The majority of commands continue to work including "perf test". Committer notes: Fixed up a tools/perf/util/Build reject and added: #include <traceevent/event-parse.h> to tools/perf/util/scripting-engines/trace-event-perl.c. Committer testing: $ rpm -qi libtraceevent-devel Name : libtraceevent-devel Version : 1.5.3 Release : 2.fc36 Architecture: x86_64 Install Date: Mon 25 Jul 2022 03:20:19 PM -03 Group : Unspecified Size : 27728 License : LGPLv2+ and GPLv2+ Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4 Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm Build Date : Fri 15 Apr 2022 10:57:01 AM -03 Build Host : buildvm-x86-05.iad2.fedoraproject.org Packager : Fedora Project Vendor : Fedora Project URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/ Bug URL : https://bugz.fedoraproject.org/libtraceevent Summary : Development headers of libtraceevent Description : Development headers of libtraceevent-libs $ Default build: $ ldd ~/bin/perf | grep tracee libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000) $ # perf trace -e sched:* --max-events 10 0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1) 0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1) 0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120) 1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120) 1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120) 0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2) 0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2) 0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120) 1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1) 1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120) # Had to tweak tools/perf/util/setup.py to make sure the python binding shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is present in CFLAGS. Building with NO_LIBTRACEEVENT=1 uncovered some more build failures: - Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y - perf-$(CONFIG_LIBTRACEEVENT) += scripts/ - bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y - The python binding needed some fixups and util/trace-event.c can't be built and linked with the python binding shared object, so remove it in tools/perf/util/setup.py and exclude it from the list of dependencies in the python/perf.so Makefile.perf target. Building without libtraceevent-devel installed uncovered more build failures: - The python binding tools/perf/util/python.c was assuming that traceevent/parse-events.h was always available, which was the case when we defaulted to using the in-kernel tools/lib/traceevent/ files, now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like the other parts of it that deal with tracepoints. - We have to ifdef the rules in the Build files with CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't detect libtraceevent-devel installed in the system. Simplification here to avoid these two ways of disabling builtin-trace.c and not having CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean way. From Athira: <quote> tools/perf/arch/powerpc/util/Build -perf-y += kvm-stat.o +perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o </quote> Then, ditto for arm64 and s390, detected by container cross build tests. - s/390 uses test__checkevent_tracepoint() that is now only available if HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT. Also from Athira: <quote> With this change, I could successfully compile in these environment: - Without libtraceevent-devel installed - With libtraceevent-devel installed - With “make NO_LIBTRACEEVENT=1” </quote> Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for consistency with other libraries detected in tools/perf/. Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: bpf@vger.kernel.org Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-05 22:59:39 +00:00
#if defined(HAVE_LIBBABELTRACE_SUPPORT) && defined(HAVE_LIBTRACEEVENT)
return bt_convert__perf2ctf(input_name, to_ctf, &opts);
perf data: Add perf data to CTF conversion support Adding 'perf data convert' to convert perf data file into different format. This patch adds support for CTF format conversion. To convert perf.data into CTF run: $ perf data convert --to-ctf=./ctf-data/ [ perf data convert: Converted 'perf.data' into CTF data './ctf-data/' ] [ perf data convert: Converted and wrote 11.268 MB (100230 samples) ] The command will create CTF metadata out of perf.data file (or one specified via -i option) and then convert all sample events into single CTF stream. Each sample_type bit is translated into separated CTF event field apart from following exceptions: PERF_SAMPLE_RAW - added in next patch PERF_SAMPLE_READ - TODO PERF_SAMPLE_CALLCHAIN - TODO PERF_SAMPLE_BRANCH_STACK - TODO PERF_SAMPLE_REGS_USER - TODO PERF_SAMPLE_STACK_USER - TODO $ perf --debug=data-convert=2 data convert ... The converted CTF data could be analyzed by CTF tools, like babletrace or tracecompass [1]. $ babeltrace ./ctf-data/ [03:19:13.962125533] (+?.?????????) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 } [03:19:13.962130001] (+0.000004468) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 } [03:19:13.962131936] (+0.000001935) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 8 } [03:19:13.962133732] (+0.000001796) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 114 } [03:19:13.962135557] (+0.000001825) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 2087 } [03:19:13.962137627] (+0.000002070) cycles: { }, { ip = 0xFFFFFFFF81361938, tid = 20714, pid = 20714, period = 37582 } [03:19:13.962161091] (+0.000023464) cycles: { }, { ip = 0xFFFFFFFF8124218F, tid = 20714, pid = 20714, period = 600246 } [03:19:13.962517569] (+0.000356478) cycles: { }, { ip = 0xFFFFFFFF811A75DB, tid = 20714, pid = 20714, period = 1325731 } [03:19:13.969518008] (+0.007000439) cycles: { }, { ip = 0x34080917B2, tid = 20714, pid = 20714, period = 1144298 } The following members to the ctf-environment were decided to be added to distinguish and specify perf CTF data: - domain It says "kernel" because it contains a kernel trace (not to be confused with a user space like lttng-ust does) - tracer_name It says perf. This can be used to distinguish between lttng and perf CTF based trace. - version The kernel version from stream. In addition to release, this is what it looks like on a Debian kernel: release = "3.14-1-amd64"; version = "3.14.0"; [1] http://projects.eclipse.org/projects/tools.tracecompass Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jeremie Galarneau <jgalar@efficios.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1424470628-5969-4-git-send-email-jolsa@kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-20 22:17:00 +00:00
#else
perf data: Add JSON export This adds a feature to export perf data to JSON. The resolved symbols are exported into the JSON so that external tools don't need to load the dsos themselves (or even have access to them at all.) This makes it easy to load and analyze perf data with standalone tools where direct perf or libbabeltrace integration is impractical. The exporter uses a minimal inline JSON encoding without any external dependencies. Currently it only outputs some headers and sample metadata but it's easily extensible. Use it like this: $ perf data convert --to-json out.json Committer notes: Fixup a __printf() bug that broke the build: util/data-convert-json.c:103:11: error: expected ‘)’ before numeric constant 103 | __(printf, 5, 6) | ^~ | ) util/data-convert-json.c: In function ‘output_sample_callchain_entry’: util/data-convert-json.c:124:2: error: implicit declaration of function ‘output_json_key_format’; did you mean ‘output_json_format’? [-Werror=implicit-function-declaration] 124 | output_json_key_format(out, false, 5, "ip", "\"0x%" PRIx64 "\"", ip); | ^~~~~~~~~~~~~~~~~~~~~~ | output_json_format Also had to add this patch to fix errors reported by various versions of clang: - if (al && al->sym && al->sym->name && strlen(al->sym->name) > 0) { + if (al && al->sym && al->sym->namelen) { al->sym->name is a zero sized array, to avoid one extra alloc in the symbol__new() constructor, sym->namelen carries its strlen. Committer testing: $ ls -la out.json ls: cannot access 'out.json': No such file or directory $ perf record sleep 0.1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.001 MB perf.data (8 samples) ] $ perf report --stats | grep -w SAMPLE SAMPLE events: 8 $ perf data convert --to-json out.json [ perf data convert: Converted 'perf.data' into JSON data 'out.json' ] [ perf data convert: Converted and wrote 0.002 MB (8 samples) ] $ ls -la out.json -rw-rw-r--. 1 acme acme 2017 Apr 26 17:29 out.json $ cat out.json { "linux-perf-json-version": 1, "headers": { "header-version": 1, "captured-on": "2021-04-26T20:28:57Z", "data-offset": 432, "data-size": 1016, "feat-offset": 1448, "hostname": "five", "os-release": "5.11.14-200.fc33.x86_64", "arch": "x86_64", "cpu-desc": "AMD Ryzen 9 3900X 12-Core Processor", "cpuid": "AuthenticAMD,23,113,0", "nrcpus-online": 24, "nrcpus-avail": 24, "perf-version": "5.12.gee134f3189bd", "cmdline": [ "/home/acme/bin/perf", "record", "sleep", "0.1" ] }, "samples": [ { "timestamp": 170517539043684, "pid": 375844, "tid": 375844, "comm": "sleep", "callchain": [ { "ip": "0xffffffffa6268827" } ] }, { "timestamp": 170517539048443, "pid": 375844, "tid": 375844, "comm": "sleep", "callchain": [ { "ip": "0xffffffffa661359d" } ] }, { "timestamp": 170517539051018, "pid": 375844, "tid": 375844, "comm": "sleep", "callchain": [ { "ip": "0xffffffffa6311e18" } ] }, { "timestamp": 170517539053652, "pid": 375844, "tid": 375844, "comm": "sleep", "callchain": [ { "ip": "0x7fdb77b4812b", "symbol": "_dl_start", "dso": "ld-2.32.so" } ] }, { "timestamp": 170517539055306, "pid": 375844, "tid": 375844, "comm": "sleep", "callchain": [ { "ip": "0xffffffffa6269286" } ] }, { "timestamp": 170517539057590, "pid": 375844, "tid": 375844, "comm": "sleep", "callchain": [ { "ip": "0xffffffffa62abd8b" } ] }, { "timestamp": 170517539067559, "pid": 375844, "tid": 375844, "comm": "sleep", "callchain": [ { "ip": "0x7fdb77b5e9e9", "symbol": "__GI___tunables_init", "dso": "ld-2.32.so" } ] }, { "timestamp": 170517539282452, "pid": 375844, "tid": 375844, "comm": "sleep", "callchain": [ { "ip": "0x7fdb779978d2", "symbol": "getenv", "dso": "libc-2.32.so" } ] } ] } $ Signed-off-by: Nicholas Fraser <nfraser@codeweavers.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Changbin Du <changbin.du@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tan Xiaojun <tanxiaojun@huawei.com> Cc: Ulrich Czekalla <uczekalla@codeweavers.com> Link: http://lore.kernel.org/lkml/3884969f-804d-2f53-c648-e2b0bd85edff@codeweavers.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-26 14:47:16 +00:00
pr_err("The libbabeltrace support is not compiled in. perf should be "
"compiled with environment variables LIBBABELTRACE=1 and "
perf build: Use libtraceevent from the system Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command line variables. If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the build, don't compile in libtraceevent and libtracefs support. This also disables CONFIG_TRACE that controls "perf trace". CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles, HAVE_LIBTRACEEVENT is used in C code. Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the commands kmem, kwork, lock, sched and timechart are removed. The majority of commands continue to work including "perf test". Committer notes: Fixed up a tools/perf/util/Build reject and added: #include <traceevent/event-parse.h> to tools/perf/util/scripting-engines/trace-event-perl.c. Committer testing: $ rpm -qi libtraceevent-devel Name : libtraceevent-devel Version : 1.5.3 Release : 2.fc36 Architecture: x86_64 Install Date: Mon 25 Jul 2022 03:20:19 PM -03 Group : Unspecified Size : 27728 License : LGPLv2+ and GPLv2+ Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4 Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm Build Date : Fri 15 Apr 2022 10:57:01 AM -03 Build Host : buildvm-x86-05.iad2.fedoraproject.org Packager : Fedora Project Vendor : Fedora Project URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/ Bug URL : https://bugz.fedoraproject.org/libtraceevent Summary : Development headers of libtraceevent Description : Development headers of libtraceevent-libs $ Default build: $ ldd ~/bin/perf | grep tracee libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000) $ # perf trace -e sched:* --max-events 10 0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1) 0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1) 0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120) 1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120) 1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120) 0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2) 0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2) 0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120) 1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1) 1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120) # Had to tweak tools/perf/util/setup.py to make sure the python binding shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is present in CFLAGS. Building with NO_LIBTRACEEVENT=1 uncovered some more build failures: - Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y - perf-$(CONFIG_LIBTRACEEVENT) += scripts/ - bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y - The python binding needed some fixups and util/trace-event.c can't be built and linked with the python binding shared object, so remove it in tools/perf/util/setup.py and exclude it from the list of dependencies in the python/perf.so Makefile.perf target. Building without libtraceevent-devel installed uncovered more build failures: - The python binding tools/perf/util/python.c was assuming that traceevent/parse-events.h was always available, which was the case when we defaulted to using the in-kernel tools/lib/traceevent/ files, now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like the other parts of it that deal with tracepoints. - We have to ifdef the rules in the Build files with CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't detect libtraceevent-devel installed in the system. Simplification here to avoid these two ways of disabling builtin-trace.c and not having CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean way. From Athira: <quote> tools/perf/arch/powerpc/util/Build -perf-y += kvm-stat.o +perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o </quote> Then, ditto for arm64 and s390, detected by container cross build tests. - s/390 uses test__checkevent_tracepoint() that is now only available if HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT. Also from Athira: <quote> With this change, I could successfully compile in these environment: - Without libtraceevent-devel installed - With libtraceevent-devel installed - With “make NO_LIBTRACEEVENT=1” </quote> Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for consistency with other libraries detected in tools/perf/. Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: bpf@vger.kernel.org Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-05 22:59:39 +00:00
"LIBBABELTRACE_DIR=/path/to/libbabeltrace/.\n"
"Check also if libbtraceevent devel files are available.\n");
perf data: Add perf data to CTF conversion support Adding 'perf data convert' to convert perf data file into different format. This patch adds support for CTF format conversion. To convert perf.data into CTF run: $ perf data convert --to-ctf=./ctf-data/ [ perf data convert: Converted 'perf.data' into CTF data './ctf-data/' ] [ perf data convert: Converted and wrote 11.268 MB (100230 samples) ] The command will create CTF metadata out of perf.data file (or one specified via -i option) and then convert all sample events into single CTF stream. Each sample_type bit is translated into separated CTF event field apart from following exceptions: PERF_SAMPLE_RAW - added in next patch PERF_SAMPLE_READ - TODO PERF_SAMPLE_CALLCHAIN - TODO PERF_SAMPLE_BRANCH_STACK - TODO PERF_SAMPLE_REGS_USER - TODO PERF_SAMPLE_STACK_USER - TODO $ perf --debug=data-convert=2 data convert ... The converted CTF data could be analyzed by CTF tools, like babletrace or tracecompass [1]. $ babeltrace ./ctf-data/ [03:19:13.962125533] (+?.?????????) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 } [03:19:13.962130001] (+0.000004468) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 } [03:19:13.962131936] (+0.000001935) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 8 } [03:19:13.962133732] (+0.000001796) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 114 } [03:19:13.962135557] (+0.000001825) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 2087 } [03:19:13.962137627] (+0.000002070) cycles: { }, { ip = 0xFFFFFFFF81361938, tid = 20714, pid = 20714, period = 37582 } [03:19:13.962161091] (+0.000023464) cycles: { }, { ip = 0xFFFFFFFF8124218F, tid = 20714, pid = 20714, period = 600246 } [03:19:13.962517569] (+0.000356478) cycles: { }, { ip = 0xFFFFFFFF811A75DB, tid = 20714, pid = 20714, period = 1325731 } [03:19:13.969518008] (+0.007000439) cycles: { }, { ip = 0x34080917B2, tid = 20714, pid = 20714, period = 1144298 } The following members to the ctf-environment were decided to be added to distinguish and specify perf CTF data: - domain It says "kernel" because it contains a kernel trace (not to be confused with a user space like lttng-ust does) - tracer_name It says perf. This can be used to distinguish between lttng and perf CTF based trace. - version The kernel version from stream. In addition to release, this is what it looks like on a Debian kernel: release = "3.14-1-amd64"; version = "3.14.0"; [1] http://projects.eclipse.org/projects/tools.tracecompass Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jeremie Galarneau <jgalar@efficios.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1424470628-5969-4-git-send-email-jolsa@kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-20 22:17:00 +00:00
return -1;
#endif
}
return 0;
}
static struct data_cmd data_cmds[] = {
perf data: Add perf data to CTF conversion support Adding 'perf data convert' to convert perf data file into different format. This patch adds support for CTF format conversion. To convert perf.data into CTF run: $ perf data convert --to-ctf=./ctf-data/ [ perf data convert: Converted 'perf.data' into CTF data './ctf-data/' ] [ perf data convert: Converted and wrote 11.268 MB (100230 samples) ] The command will create CTF metadata out of perf.data file (or one specified via -i option) and then convert all sample events into single CTF stream. Each sample_type bit is translated into separated CTF event field apart from following exceptions: PERF_SAMPLE_RAW - added in next patch PERF_SAMPLE_READ - TODO PERF_SAMPLE_CALLCHAIN - TODO PERF_SAMPLE_BRANCH_STACK - TODO PERF_SAMPLE_REGS_USER - TODO PERF_SAMPLE_STACK_USER - TODO $ perf --debug=data-convert=2 data convert ... The converted CTF data could be analyzed by CTF tools, like babletrace or tracecompass [1]. $ babeltrace ./ctf-data/ [03:19:13.962125533] (+?.?????????) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 } [03:19:13.962130001] (+0.000004468) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 } [03:19:13.962131936] (+0.000001935) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 8 } [03:19:13.962133732] (+0.000001796) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 114 } [03:19:13.962135557] (+0.000001825) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 2087 } [03:19:13.962137627] (+0.000002070) cycles: { }, { ip = 0xFFFFFFFF81361938, tid = 20714, pid = 20714, period = 37582 } [03:19:13.962161091] (+0.000023464) cycles: { }, { ip = 0xFFFFFFFF8124218F, tid = 20714, pid = 20714, period = 600246 } [03:19:13.962517569] (+0.000356478) cycles: { }, { ip = 0xFFFFFFFF811A75DB, tid = 20714, pid = 20714, period = 1325731 } [03:19:13.969518008] (+0.007000439) cycles: { }, { ip = 0x34080917B2, tid = 20714, pid = 20714, period = 1144298 } The following members to the ctf-environment were decided to be added to distinguish and specify perf CTF data: - domain It says "kernel" because it contains a kernel trace (not to be confused with a user space like lttng-ust does) - tracer_name It says perf. This can be used to distinguish between lttng and perf CTF based trace. - version The kernel version from stream. In addition to release, this is what it looks like on a Debian kernel: release = "3.14-1-amd64"; version = "3.14.0"; [1] http://projects.eclipse.org/projects/tools.tracecompass Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jeremie Galarneau <jgalar@efficios.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1424470628-5969-4-git-send-email-jolsa@kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-20 22:17:00 +00:00
{ "convert", "converts data file between formats", cmd_data_convert },
{ .name = NULL, },
};
int cmd_data(int argc, const char **argv)
{
struct data_cmd *cmd;
const char *cmdstr;
argc = parse_options_subcommand(argc, argv, data_options, data_subcommands, data_usage,
PARSE_OPT_STOP_AT_NON_OPTION);
perf data: Correct -h output There is currently only 1 'perf data' command, but supporting extra commands was breaking the help output. Simplify for now so that the help output is correct. Before: $ perf data -h Usage: perf data [<common options>] <command> [<options>] $ perf data Usage: perf data [<common options>] <command> [<options>] Available commands: convert - converts data file between formats After: $ perf data Usage: perf data convert [<options>] -f, --force don't complain, do it -i, --input <file> input file name -v, --verbose be more verbose --all Convert all events --to-ctf ... Convert to CTF format --to-json ... Convert to JSON format --tod Convert time to wall clock time $ perf data -h Usage: perf data convert [<options>] -f, --force don't complain, do it -i, --input <file> input file name -v, --verbose be more verbose --all Convert all events --to-ctf ... Convert to CTF format --to-json ... Convert to JSON format --tod Convert time to wall clock time Signed-off-by: Joshua Martinez <joshuamart@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20210824205829.52822-1-irogers@google.com Signed-off-by: Ian Rogers <irogers@google.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-08-24 20:58:29 +00:00
if (!argc) {
usage_with_options(data_usage, data_options);
return -1;
}
cmdstr = argv[0];
for_each_cmd(cmd) {
if (strcmp(cmd->name, cmdstr))
continue;
return cmd->fn(argc, argv);
}
pr_err("Unknown command: %s\n", cmdstr);
perf data: Correct -h output There is currently only 1 'perf data' command, but supporting extra commands was breaking the help output. Simplify for now so that the help output is correct. Before: $ perf data -h Usage: perf data [<common options>] <command> [<options>] $ perf data Usage: perf data [<common options>] <command> [<options>] Available commands: convert - converts data file between formats After: $ perf data Usage: perf data convert [<options>] -f, --force don't complain, do it -i, --input <file> input file name -v, --verbose be more verbose --all Convert all events --to-ctf ... Convert to CTF format --to-json ... Convert to JSON format --tod Convert time to wall clock time $ perf data -h Usage: perf data convert [<options>] -f, --force don't complain, do it -i, --input <file> input file name -v, --verbose be more verbose --all Convert all events --to-ctf ... Convert to CTF format --to-json ... Convert to JSON format --tod Convert time to wall clock time Signed-off-by: Joshua Martinez <joshuamart@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20210824205829.52822-1-irogers@google.com Signed-off-by: Ian Rogers <irogers@google.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-08-24 20:58:29 +00:00
usage_with_options(data_usage, data_options);
return -1;
}