linux-stable/tools/perf/util/build-id.h

89 lines
3.2 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef PERF_BUILD_ID_H_
#define PERF_BUILD_ID_H_ 1
#define BUILD_ID_SIZE 20 /* SHA-1 length in bytes */
#define BUILD_ID_MIN_SIZE 16 /* MD5/UUID/GUID length in bytes */
#define SBUILD_ID_SIZE (BUILD_ID_SIZE * 2 + 1)
#define SBUILD_ID_MIN_SIZE (BUILD_ID_MIN_SIZE * 2 + 1)
#include "machine.h"
#include "tool.h"
#include <linux/types.h>
struct build_id {
u8 data[BUILD_ID_SIZE];
size_t size;
};
struct nsinfo;
extern struct perf_tool build_id__mark_dso_hit_ops;
struct dso;
struct feat_fd;
void build_id__init(struct build_id *bid, const u8 *data, size_t size);
int build_id__sprintf(const struct build_id *build_id, char *bf);
bool build_id__is_defined(const struct build_id *bid);
int sysfs__sprintf_build_id(const char *root_dir, char *sbuild_id);
int filename__sprintf_build_id(const char *pathname, char *sbuild_id);
char *build_id_cache__kallsyms_path(const char *sbuild_id, char *bf,
size_t size);
char *dso__build_id_filename(const struct dso *dso, char *bf, size_t size,
bool is_debug);
char *__dso__build_id_filename(const struct dso *dso, char *bf, size_t size,
bool is_debug, bool is_kallsyms);
perf annotate: Use build-ids to find the right DSO We were still using the pathname found on the MMAP event, that could not be the one we used when recording, so use the build-id cache for that, only falling back to use the pathname in the MMAP event if no build-ids are available. With this we now also are able to do secure, seamless offline annotation. Example: [root@doppio linux-2.6-tip]# perf report -g none -v 2> /dev/null | head -10 8.12% Xorg /usr/lib64/libpixman-1.so.0.14.0 0x0000000000026d02 B [.] pixman_rasterize_edges 4.68% firefox /usr/lib64/xulrunner-1.9.1/libxul.so 0x00000000005dbdba B [.] 0x000000005dbdba 3.70% swapper /lib/modules/2.6.34-rc6/build/vmlinux 0xffffffff81022cea ! [k] read_hpet 2.96% init /lib/modules/2.6.34-rc6/build/vmlinux 0xffffffff81022cea ! [k] read_hpet 2.73% swapper /lib/modules/2.6.34-rc6/build/vmlinux 0xffffffff8100a738 ! [k] mwait_idle_with_hints [root@doppio linux-2.6-tip]# perf annotate -v pixman_rasterize_edges 2>&1 | grep Executing Executing: objdump --start-address=0x000000371ce26670 --stop-address=0x000000371ce2709f -dS /root/.debug/.build-id/bd/6ac5199137aaeb279f864717d8d061477466c1|grep -v /root/.debug/.build-id/bd/6ac5199137aaeb279f864717d8d061477466c1|expand [root@doppio linux-2.6-tip]# perf buildid-list | grep libpixman-1.so.0.14.0 bd6ac5199137aaeb279f864717d8d061477466c1 /usr/lib64/libpixman-1.so.0.14.0 [root@doppio linux-2.6-tip]# Reported-by: Stephane Eranian <eranian@google.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-20 15:15:33 +00:00
int build_id__mark_dso_hit(struct perf_tool *tool, union perf_event *event,
struct perf_sample *sample, struct evsel *evsel,
struct machine *machine);
int dsos__hit_all(struct perf_session *session);
perf bench: Add build-id injection benchmark Sometimes I can see that 'perf record' piped with 'perf inject' take a long time processing build-ids. So introduce a inject-build-id benchmark to the internals benchmark suite to measure its overhead regularly. It runs the 'perf inject' command internally and feeds the given number of synthesized events (MMAP2 + SAMPLE basically). Usage: perf bench internals inject-build-id <options> -i, --iterations <n> Number of iterations used to compute average (default: 100) -m, --nr-mmaps <n> Number of mmap events for each iteration (default: 100) -n, --nr-samples <n> Number of sample events per mmap event (default: 100) -v, --verbose be more verbose (show iteration count, DSO name, etc) By default, it measures average processing time of 100 MMAP2 events and 10000 SAMPLE events. Below is a result on my laptop. $ perf bench internals inject-build-id # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 25.789 msec (+- 0.202 msec) Average time per event: 2.528 usec (+- 0.020 usec) Average memory usage: 8411 KB (+- 7 KB) Committer testing: $ perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks syscall: System call benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks futex: Futex stressing benchmarks epoll: Epoll stressing benchmarks internals: Perf-internals benchmarks all: All benchmarks $ perf bench internals # List of available benchmarks for collection 'internals': synthesize: Benchmark perf event synthesis kallsyms-parse: Benchmark kallsyms parsing inject-build-id: Benchmark build-id injection $ perf bench internals inject-build-id # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 14.202 msec (+- 0.059 msec) Average time per event: 1.392 usec (+- 0.006 usec) Average memory usage: 12650 KB (+- 10 KB) Average build-id-all injection took: 12.831 msec (+- 0.071 msec) Average time per event: 1.258 usec (+- 0.007 usec) Average memory usage: 11895 KB (+- 10 KB) $ $ perf stat -r5 perf bench internals inject-build-id # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 14.380 msec (+- 0.056 msec) Average time per event: 1.410 usec (+- 0.006 usec) Average memory usage: 12608 KB (+- 11 KB) Average build-id-all injection took: 11.889 msec (+- 0.064 msec) Average time per event: 1.166 usec (+- 0.006 usec) Average memory usage: 11838 KB (+- 10 KB) # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 14.246 msec (+- 0.065 msec) Average time per event: 1.397 usec (+- 0.006 usec) Average memory usage: 12744 KB (+- 10 KB) Average build-id-all injection took: 12.019 msec (+- 0.066 msec) Average time per event: 1.178 usec (+- 0.006 usec) Average memory usage: 11963 KB (+- 10 KB) # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 14.321 msec (+- 0.067 msec) Average time per event: 1.404 usec (+- 0.007 usec) Average memory usage: 12690 KB (+- 10 KB) Average build-id-all injection took: 11.909 msec (+- 0.041 msec) Average time per event: 1.168 usec (+- 0.004 usec) Average memory usage: 11938 KB (+- 10 KB) # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 14.287 msec (+- 0.059 msec) Average time per event: 1.401 usec (+- 0.006 usec) Average memory usage: 12864 KB (+- 10 KB) Average build-id-all injection took: 11.862 msec (+- 0.058 msec) Average time per event: 1.163 usec (+- 0.006 usec) Average memory usage: 12103 KB (+- 10 KB) # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 14.402 msec (+- 0.053 msec) Average time per event: 1.412 usec (+- 0.005 usec) Average memory usage: 12876 KB (+- 10 KB) Average build-id-all injection took: 11.826 msec (+- 0.061 msec) Average time per event: 1.159 usec (+- 0.006 usec) Average memory usage: 12111 KB (+- 10 KB) Performance counter stats for 'perf bench internals inject-build-id' (5 runs): 4,267.48 msec task-clock:u # 1.502 CPUs utilized ( +- 0.14% ) 0 context-switches:u # 0.000 K/sec 0 cpu-migrations:u # 0.000 K/sec 102,092 page-faults:u # 0.024 M/sec ( +- 0.08% ) 3,894,589,578 cycles:u # 0.913 GHz ( +- 0.19% ) (83.49%) 140,078,421 stalled-cycles-frontend:u # 3.60% frontend cycles idle ( +- 0.77% ) (83.34%) 948,581,189 stalled-cycles-backend:u # 24.36% backend cycles idle ( +- 0.46% ) (83.25%) 5,835,587,719 instructions:u # 1.50 insn per cycle # 0.16 stalled cycles per insn ( +- 0.21% ) (83.24%) 1,267,423,636 branches:u # 296.996 M/sec ( +- 0.22% ) (83.12%) 17,484,290 branch-misses:u # 1.38% of all branches ( +- 0.12% ) (83.55%) 2.84176 +- 0.00222 seconds time elapsed ( +- 0.08% ) $ Acked-by: Jiri Olsa <jolsa@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20201012070214.2074921-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-12 07:02:09 +00:00
int perf_event__inject_buildid(struct perf_tool *tool, union perf_event *event,
struct perf_sample *sample, struct evsel *evsel,
struct machine *machine);
bool perf_session__read_build_ids(struct perf_session *session, bool with_hits);
int perf_session__write_buildid_table(struct perf_session *session,
struct feat_fd *fd);
int perf_session__cache_build_ids(struct perf_session *session);
int __perf_session__cache_build_ids(struct perf_session *session,
machine__dso_t fn, void *priv);
char *build_id_cache__origname(const char *sbuild_id);
char *build_id_cache__linkname(const char *sbuild_id, char *bf, size_t size);
char *build_id_cache__cachedir(const char *sbuild_id, const char *name,
struct nsinfo *nsi, bool is_kallsyms,
bool is_vdso);
struct strlist;
struct strlist *build_id_cache__list_all(bool validonly);
perf probe: Support @BUILDID or @FILE suffix for SDT events Support @BUILDID or @FILE suffix for SDT events. This allows perf to add probes on SDTs/pre-cached events on given FILE or the file which has given BUILDID (also, this complements BUILDID.) For example, both gcc and libstdc++ has same SDTs as below. If you would like to add a probe on sdt_libstdcxx:catch on gcc, you can do as below. ---- # perf list sdt | tail -n 6 sdt_libstdcxx:catch@/usr/bin/gcc(0cc207fc4b27) [SDT event] sdt_libstdcxx:catch@/usr/lib64/libstdc++.so.6.0.20(91c7a88fdf49) sdt_libstdcxx:rethrow@/usr/bin/gcc(0cc207fc4b27) [SDT event] sdt_libstdcxx:rethrow@/usr/lib64/libstdc++.so.6.0.20(91c7a88fdf49) sdt_libstdcxx:throw@/usr/bin/gcc(0cc207fc4b27) [SDT event] sdt_libstdcxx:throw@/usr/lib64/libstdc++.so.6.0.20(91c7a88fdf49) # perf probe -a %sdt_libstdcxx:catch@0cc Added new event: sdt_libstdcxx:catch (on %catch in /usr/bin/gcc) You can now use it in all perf tools, such as: perf record -e sdt_libstdcxx:catch -aR sleep 1 ---- Committer note: Doing the full sequence of steps to get the results above: With a clean build-id cache: [root@jouet ~]# rm -rf ~/.debug/ [root@jouet ~]# perf list sdt List of pre-defined events (to be used in -e): [root@jouet ~]# No events whatsoever, then, we can add all events in gcc to the build-id cache, doing a --add + --dry-run: [root@jouet ~]# perf probe --dry-run --cache -x /usr/bin/gcc --add %sdt_libstdcxx:\* Added new events: sdt_libstdcxx:throw (on %* in /usr/bin/gcc) sdt_libstdcxx:rethrow (on %* in /usr/bin/gcc) sdt_libstdcxx:catch (on %* in /usr/bin/gcc) You can now use it in all perf tools, such as: perf record -e sdt_libstdcxx:catch -aR sleep 1 [root@jouet ~]# It really didn't add any events, it just cached them: [root@jouet ~]# perf probe -l [root@jouet ~]# We can see that it was cached as: [root@jouet ~]# ls -la ~/.debug/usr/bin/gcc/9a0730e2bcc6d2a2003d21ac46807e8ee6bcb7c2/ total 976 drwxr-xr-x. 2 root root 4096 Jul 13 21:47 . drwxr-xr-x. 3 root root 4096 Jul 13 21:47 .. -rwxr-xr-x. 4 root root 985912 Jun 22 18:52 elf -rw-r--r--. 1 root root 303 Jul 13 21:47 probes [root@jouet ~]# file ~/.debug/usr/bin/gcc/9a0730e2bcc6d2a2003d21ac46807e8ee6bcb7c2/elf /root/.debug/usr/bin/gcc/9a0730e2bcc6d2a2003d21ac46807e8ee6bcb7c2/elf: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux 2.6.32, BuildID[sha1]=9a0730e2bcc6d2a2003d21ac46807e8ee6bcb7c2, stripped [root@jouet ~]# cat ~/.debug/usr/bin/gcc/9a0730e2bcc6d2a2003d21ac46807e8ee6bcb7c2/probes %sdt_libstdcxx:throw=throw p:sdt_libstdcxx/throw /usr/bin/gcc:0x71ffd %sdt_libstdcxx:rethrow=rethrow p:sdt_libstdcxx/rethrow /usr/bin/gcc:0x720b8 %sdt_libstdcxx:catch=catch p:sdt_libstdcxx/catch /usr/bin/gcc:0x7307f %sdt_libgcc:unwind=unwind p:sdt_libgcc/unwind /usr/bin/gcc:0x7eec0 #sdt_libstdcxx:*=%* [root@jouet ~]# Ok, now we can use 'perf probe' to refer to those cached entries as: Humm, nope, doing as above we end up with: [root@jouet ~]# perf probe -a %sdt_libstdcxx:catch Semantic error :* is bad for event name -it must follow C symbol-naming rule. Error: Failed to add events. [root@jouet ~]# But it worked at some point, lets try not using --dry-run: Resetting everything: # rm -rf ~/.debug/ # perf probe -d *:* # perf probe -l # perf list sdt List of pre-defined events (to be used in -e): # Ok, now it cached everything, even things we haven't asked it to (sdt_libgcc:unwind): [root@jouet ~]# perf probe -x /usr/bin/gcc --add %sdt_libstdcxx:\* Added new events: sdt_libstdcxx:throw (on %* in /usr/bin/gcc) sdt_libstdcxx:rethrow (on %* in /usr/bin/gcc) sdt_libstdcxx:catch (on %* in /usr/bin/gcc) You can now use it in all perf tools, such as: perf record -e sdt_libstdcxx:catch -aR sleep 1 [root@jouet ~]# perf list sdt List of pre-defined events (to be used in -e): sdt_libgcc:unwind [SDT event] sdt_libstdcxx:catch [SDT event] sdt_libstdcxx:rethrow [SDT event] sdt_libstdcxx:throw [SDT event] [root@jouet ~]# And we have the events in place: [root@jouet ~]# perf probe -l sdt_libstdcxx:catch (on execute_cfa_program+1551@../../../libgcc/unwind-dw2.c in /usr/bin/gcc) sdt_libstdcxx:rethrow (on d_print_subexpr+280@libsupc++/cp-demangle.c in /usr/bin/gcc) sdt_libstdcxx:throw (on d_print_subexpr+93@libsupc++/cp-demangle.c in /usr/bin/gcc) [root@jouet ~]# And trying to use them at least has 'perf trace --event sdt*:*' working. Then, if we try to add the ones in libstdc++: [root@jouet ~]# perf probe -x /usr/lib64/libstdc++.so.6 -a %sdt_libstdcxx:\* Error: event "catch" already exists. Hint: Remove existing event by 'perf probe -d' or force duplicates by 'perf probe -f' or set 'force=yes' in BPF source. Error: Failed to add events. [root@jouet ~]# Doesn't work, dups, but at least this served to, unbeknownst to the user, add the SDT probes in /usr/lib64/libstdc++.so.6! [root@jouet ~]# perf list sdt List of pre-defined events (to be used in -e): sdt_libgcc:unwind [SDT event] sdt_libstdcxx:catch@/usr/bin/gcc(9a0730e2bcc6) [SDT event] sdt_libstdcxx:catch@/usr/lib64/libstdc++.so.6.0.22(ef2b7066559a) [SDT event] sdt_libstdcxx:rethrow@/usr/bin/gcc(9a0730e2bcc6) [SDT event] sdt_libstdcxx:rethrow@/usr/lib64/libstdc++.so.6.0.22(ef2b7066559a) [SDT event] sdt_libstdcxx:throw@/usr/bin/gcc(9a0730e2bcc6) [SDT event] sdt_libstdcxx:throw@/usr/lib64/libstdc++.so.6.0.22(ef2b7066559a) [SDT event] [root@jouet ~]# Now we should be able to get to the original cset comment, if we remove all SDTs events in place, not from the cache, from the kernel, where it was set up as: [root@jouet ~]# ls -la /sys/kernel/debug/tracing/events/sdt_libstdcxx/ total 0 drwxr-xr-x. 5 root root 0 Jul 13 22:00 . drwxr-xr-x. 80 root root 0 Jul 13 21:56 .. drwxr-xr-x. 2 root root 0 Jul 13 22:00 catch -rw-r--r--. 1 root root 0 Jul 13 22:00 enable -rw-r--r--. 1 root root 0 Jul 13 22:00 filter drwxr-xr-x. 2 root root 0 Jul 13 22:00 rethrow drwxr-xr-x. 2 root root 0 Jul 13 22:00 throw [root@jouet ~]# [root@jouet ~]# head -2 /sys/kernel/debug/tracing/events/sdt_libstdcxx/throw/format name: throw ID: 2059 [root@jouet ~]# Now to remove it: [root@jouet ~]# perf probe -d sdt_libstdc*:* Removed event: sdt_libstdcxx:catch Removed event: sdt_libstdcxx:rethrow Removed event: sdt_libstdcxx:throw [root@jouet ~]# Which caused: [root@jouet ~]# ls -la /sys/kernel/debug/tracing/events/sdt_libstdcxx/ ls: cannot access '/sys/kernel/debug/tracing/events/sdt_libstdcxx/': No such file or directory [root@jouet ~]# Ok, now we can do: [root@jouet ~]# perf list sdt_libstdcxx:catch List of pre-defined events (to be used in -e): sdt_libstdcxx:catch@/usr/bin/gcc(9a0730e2bcc6) [SDT event] sdt_libstdcxx:catch@/usr/lib64/libstdc++.so.6.0.22(ef2b7066559a) [SDT event] [root@jouet ~]# So, these are not really 'pre-defined events', i.e. we can't use them with 'perf record --event': [root@jouet ~]# perf record --event sdt_libstdcxx:catch* event syntax error: 'sdt_libstdcxx:catch*' \___ unknown tracepoint Error: File /sys/kernel/debug/tracing/events/sdt_libstdcxx/catch* not found. Hint: Perhaps this kernel misses some CONFIG_ setting to enable this feature?. <SNIP> [root@jouet ~]# To have it really pre-defined we must use perf probe to get its definition from the cache and set it up in the kernel, creating the tracepoint to _then_ use it with 'perf record --event': [root@jouet ~]# perf probe -a sdt_libstdcxx:catch Semantic error :There is non-digit char in line number. <SNIP> Oops, there is another gotcha here, we need that pesky '%' character: [root@jouet ~]# perf probe -a %sdt_libstdcxx:catch Added new events: sdt_libstdcxx:catch (on %catch in /usr/bin/gcc) sdt_libstdcxx:catch_1 (on %catch in /usr/lib64/libstdc++.so.6.0.22) You can now use it in all perf tools, such as: perf record -e sdt_libstdcxx:catch_1 -aR sleep 1 [root@jouet ~]# But then we added _two_ events, one with the name we expected, the other one with a _ added, when doing the analysis we need to pay attention to who maps to who. And here is where we get to the point of this patch, which is to be able to disambiguate those definitions for 'catch' in the build-id cache, but first we need remove those events we just added: [root@jouet ~]# perf probe -d %sdt_libstdcxx:catch Oops, that didn't remove anything, we need to _remove_ that % char in this case: [root@jouet ~]# perf probe -d sdt_libstdcxx:catch Removed event: sdt_libstdcxx:catch And we need to remove the other event added, i.e. I forgot to add a * at the end: [root@jouet ~]# perf probe -d sdt_libstdcxx:catch* Removed event: sdt_libstdcxx:catch_1 [root@jouet ~]# Ok, disambiguating it using what is in this patch: [root@jouet ~]# perf list sdt_libstdcxx:catch List of pre-defined events (to be used in -e): sdt_libstdcxx:catch@/usr/bin/gcc(9a0730e2bcc6) [SDT event] sdt_libstdcxx:catch@/usr/lib64/libstdc++.so.6.0.22(ef2b7066559a) [SDT event] [root@jouet ~]# [root@jouet ~]# perf probe -a %sdt_libstdcxx:catch@9a07 Added new event: sdt_libstdcxx:catch (on %catch in /usr/bin/gcc) You can now use it in all perf tools, such as: perf record -e sdt_libstdcxx:catch -aR sleep 1 [root@jouet ~]# perf probe -l sdt_libstdcxx:catch (on execute_cfa_program+1551@../../../libgcc/unwind-dw2.c in /usr/bin/gcc) [root@jouet ~]# Yeah, it works! But we need to try and simplify this :-) Update: Some aspects of this simplification take place in the following patches. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/146831793746.17065.13065062753978236612.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 10:05:37 +00:00
char *build_id_cache__complement(const char *incomplete_sbuild_id);
int build_id_cache__list_build_ids(const char *pathname, struct nsinfo *nsi,
perf buildid-cache: Add --purge FILE to remove all caches of FILE Add --purge FILE to remove all caches of FILE. Since the current --remove FILE removes a cache which has same build-id of given FILE. Since the command takes a FILE path, it can confuse user who tries to remove cache about FILE path. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --remove ./perf Removing 305bbd1be68f66eca7e2d78db294653031edfa79 ./perf: FAIL ./perf wasn't in the cache ----- Actually, the --remove's FAIL is not shown, it just silently fails. So, this patch adds --purge FILE action for such usecase. perf buildid-cache --purge FILE removes all caches which has same FILE path. In other words, it removes all caches including old binaries. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --purge ./perf Removing 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok ----- BTW, if you want to purge all the caches, remove ~/.debug/* . Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20150227045026.1999.64084.stgit@localhost.localdomain [ s/dirname/dir_name/g to fix build on fedora14, where dirname is a global ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-27 04:50:26 +00:00
struct strlist **result);
bool build_id_cache__cached(const char *sbuild_id);
int build_id_cache__add(const char *sbuild_id, const char *name, const char *realname,
struct nsinfo *nsi, bool is_kallsyms, bool is_vdso,
const char *proper_name, const char *root_dir);
int __build_id_cache__add_s(const char *sbuild_id,
const char *name, struct nsinfo *nsi,
bool is_kallsyms, bool is_vdso,
const char *proper_name, const char *root_dir);
static inline int build_id_cache__add_s(const char *sbuild_id,
const char *name, struct nsinfo *nsi,
bool is_kallsyms, bool is_vdso)
{
return __build_id_cache__add_s(sbuild_id, name, nsi, is_kallsyms, is_vdso, NULL, NULL);
}
int build_id_cache__remove_s(const char *sbuild_id);
extern char buildid_dir[];
void set_buildid_dir(const char *dir);
void disable_buildid_cache(void);
#endif