linux-stable/scripts/faddr2line

295 lines
8.2 KiB
Text
Raw Normal View History

#!/bin/bash
License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
# SPDX-License-Identifier: GPL-2.0
#
# Translate stack dump function offsets.
#
# addr2line doesn't work with KASLR addresses. This works similarly to
# addr2line, but instead takes the 'func+0x123' format as input:
#
# $ ./scripts/faddr2line ~/k/vmlinux meminfo_proc_show+0x5/0x568
# meminfo_proc_show+0x5/0x568:
# meminfo_proc_show at fs/proc/meminfo.c:27
#
# If the address is part of an inlined function, the full inline call chain is
# printed:
#
# $ ./scripts/faddr2line ~/k/vmlinux native_write_msr+0x6/0x27
# native_write_msr+0x6/0x27:
# arch_static_branch at arch/x86/include/asm/msr.h:121
# (inlined by) static_key_false at include/linux/jump_label.h:125
# (inlined by) native_write_msr at arch/x86/include/asm/msr.h:125
#
# The function size after the '/' in the input is optional, but recommended.
# It's used to help disambiguate any duplicate symbol names, which can occur
# rarely. If the size is omitted for a duplicate symbol then it's possible for
# multiple code sites to be printed:
#
# $ ./scripts/faddr2line ~/k/vmlinux raw_ioctl+0x5
# raw_ioctl+0x5/0x20:
# raw_ioctl at drivers/char/raw.c:122
#
# raw_ioctl+0x5/0xb1:
# raw_ioctl at net/ipv4/raw.c:876
#
# Multiple addresses can be specified on a single command line:
#
# $ ./scripts/faddr2line ~/k/vmlinux type_show+0x10/45 free_reserved_area+0x90
# type_show+0x10/0x2d:
# type_show at drivers/video/backlight/backlight.c:213
#
# free_reserved_area+0x90/0x123:
# free_reserved_area at mm/page_alloc.c:6429 (discriminator 2)
set -o errexit
set -o nounset
usage() {
echo "usage: faddr2line [--list] <object file> <func+offset> <func+offset>..." >&2
exit 1
}
warn() {
echo "$1" >&2
}
die() {
echo "ERROR: $1" >&2
exit 1
}
READELF="${CROSS_COMPILE:-}readelf"
ADDR2LINE="${CROSS_COMPILE:-}addr2line"
AWK="awk"
GREP="grep"
command -v ${AWK} >/dev/null 2>&1 || die "${AWK} isn't installed"
command -v ${READELF} >/dev/null 2>&1 || die "${READELF} isn't installed"
command -v ${ADDR2LINE} >/dev/null 2>&1 || die "${ADDR2LINE} isn't installed"
# Try to figure out the source directory prefix so we can remove it from the
# addr2line output. HACK ALERT: This assumes that start_kernel() is in
# init/main.c! This only works for vmlinux. Otherwise it falls back to
# printing the absolute path.
find_dir_prefix() {
local objfile=$1
local start_kernel_addr=$(${READELF} --symbols --wide $objfile | ${AWK} '$8 == "start_kernel" {printf "0x%s", $2}')
[[ -z $start_kernel_addr ]] && return
local file_line=$(${ADDR2LINE} -e $objfile $start_kernel_addr)
[[ -z $file_line ]] && return
local prefix=${file_line%init/main.c:*}
if [[ -z $prefix ]] || [[ $prefix = $file_line ]]; then
return
fi
DIR_PREFIX=$prefix
return 0
}
__faddr2line() {
local objfile=$1
local func_addr=$2
local dir_prefix=$3
local print_warnings=$4
local sym_name=${func_addr%+*}
local func_offset=${func_addr#*+}
func_offset=${func_offset%/*}
local user_size=
local file_type
local is_vmlinux=0
[[ $func_addr =~ "/" ]] && user_size=${func_addr#*/}
if [[ -z $sym_name ]] || [[ -z $func_offset ]] || [[ $sym_name = $func_addr ]]; then
warn "bad func+offset $func_addr"
DONE=1
return
fi
# vmlinux uses absolute addresses in the section table rather than
# section offsets.
local file_type=$(${READELF} --file-header $objfile |
${AWK} '$1 == "Type:" { print $2; exit }')
if [[ $file_type = "EXEC" ]] || [[ $file_type == "DYN" ]]; then
is_vmlinux=1
fi
# Go through each of the object's symbols which match the func name.
# In rare cases there might be duplicates, in which case we print all
# matches.
while read line; do
local fields=($line)
local sym_addr=0x${fields[1]}
local sym_elf_size=${fields[2]}
local sym_sec=${fields[6]}
local sec_size
local sec_name
# Get the section size:
sec_size=$(${READELF} --section-headers --wide $objfile |
sed 's/\[ /\[/' |
${AWK} -v sec=$sym_sec '$1 == "[" sec "]" { print "0x" $6; exit }')
if [[ -z $sec_size ]]; then
warn "bad section size: section: $sym_sec"
DONE=1
return
fi
# Get the section name:
sec_name=$(${READELF} --section-headers --wide $objfile |
sed 's/\[ /\[/' |
${AWK} -v sec=$sym_sec '$1 == "[" sec "]" { print $2; exit }')
if [[ -z $sec_name ]]; then
warn "bad section name: section: $sym_sec"
DONE=1
return
fi
# Calculate the symbol size.
#
# Unfortunately we can't use the ELF size, because kallsyms
# also includes the padding bytes in its size calculation. For
# kallsyms, the size calculation is the distance between the
# symbol and the next symbol in a sorted list.
local sym_size
local cur_sym_addr
local found=0
while read line; do
local fields=($line)
cur_sym_addr=0x${fields[1]}
local cur_sym_elf_size=${fields[2]}
local cur_sym_name=${fields[7]:-}
if [[ $cur_sym_addr = $sym_addr ]] &&
[[ $cur_sym_elf_size = $sym_elf_size ]] &&
[[ $cur_sym_name = $sym_name ]]; then
found=1
continue
fi
if [[ $found = 1 ]]; then
sym_size=$(($cur_sym_addr - $sym_addr))
[[ $sym_size -lt $sym_elf_size ]] && continue;
found=2
break
fi
done < <(${READELF} --symbols --wide $objfile | ${AWK} -v sec=$sym_sec '$7 == sec' | sort --key=2)
if [[ $found = 0 ]]; then
warn "can't find symbol: sym_name: $sym_name sym_sec: $sym_sec sym_addr: $sym_addr sym_elf_size: $sym_elf_size"
DONE=1
return
fi
# If nothing was found after the symbol, assume it's the last
# symbol in the section.
[[ $found = 1 ]] && sym_size=$(($sec_size - $sym_addr))
scripts/faddr2line: Fix "size mismatch" error I'm not sure how we missed this problem before. When I take a function address and size from an oops and give it to faddr2line, it usually complains about a size mismatch: $ scripts/faddr2line ~/k/vmlinux write_sysrq_trigger+0x51/0x60 skipping write_sysrq_trigger address at 0xffffffff815731a1 due to size mismatch (0x60 != 83) no match for write_sysrq_trigger+0x51/0x60 The problem is caused by differences in how kallsyms and faddr2line determine a function's size. kallsyms calculates a function's size by parsing the output of 'nm -n' and subtracting the next function's address from the current function's address. This means that nop instructions after the end of the function are included in the size. In contrast, faddr2line reads the size from the symbol table, which does *not* include the ending nops in the function's size. Change faddr2line to calculate the size from the output of 'nm -n' to be consistent with kallsyms and oops outputs. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/bd313ed7c4003f6b1fda63e825325c44a9d837de.1477405374.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 14:51:11 +00:00
if [[ -z $sym_size ]] || [[ $sym_size -le 0 ]]; then
warn "bad symbol size: sym_addr: $sym_addr cur_sym_addr: $cur_sym_addr"
scripts/faddr2line: Fix "size mismatch" error I'm not sure how we missed this problem before. When I take a function address and size from an oops and give it to faddr2line, it usually complains about a size mismatch: $ scripts/faddr2line ~/k/vmlinux write_sysrq_trigger+0x51/0x60 skipping write_sysrq_trigger address at 0xffffffff815731a1 due to size mismatch (0x60 != 83) no match for write_sysrq_trigger+0x51/0x60 The problem is caused by differences in how kallsyms and faddr2line determine a function's size. kallsyms calculates a function's size by parsing the output of 'nm -n' and subtracting the next function's address from the current function's address. This means that nop instructions after the end of the function are included in the size. In contrast, faddr2line reads the size from the symbol table, which does *not* include the ending nops in the function's size. Change faddr2line to calculate the size from the output of 'nm -n' to be consistent with kallsyms and oops outputs. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/bd313ed7c4003f6b1fda63e825325c44a9d837de.1477405374.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 14:51:11 +00:00
DONE=1
return
fi
scripts/faddr2line: Fix "size mismatch" error I'm not sure how we missed this problem before. When I take a function address and size from an oops and give it to faddr2line, it usually complains about a size mismatch: $ scripts/faddr2line ~/k/vmlinux write_sysrq_trigger+0x51/0x60 skipping write_sysrq_trigger address at 0xffffffff815731a1 due to size mismatch (0x60 != 83) no match for write_sysrq_trigger+0x51/0x60 The problem is caused by differences in how kallsyms and faddr2line determine a function's size. kallsyms calculates a function's size by parsing the output of 'nm -n' and subtracting the next function's address from the current function's address. This means that nop instructions after the end of the function are included in the size. In contrast, faddr2line reads the size from the symbol table, which does *not* include the ending nops in the function's size. Change faddr2line to calculate the size from the output of 'nm -n' to be consistent with kallsyms and oops outputs. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/bd313ed7c4003f6b1fda63e825325c44a9d837de.1477405374.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 14:51:11 +00:00
sym_size=0x$(printf %x $sym_size)
# Calculate the address from user-supplied offset:
local addr=$(($sym_addr + $func_offset))
if [[ -z $addr ]] || [[ $addr = 0 ]]; then
warn "bad address: $sym_addr + $func_offset"
DONE=1
return
fi
scripts/faddr2line: Fix "size mismatch" error I'm not sure how we missed this problem before. When I take a function address and size from an oops and give it to faddr2line, it usually complains about a size mismatch: $ scripts/faddr2line ~/k/vmlinux write_sysrq_trigger+0x51/0x60 skipping write_sysrq_trigger address at 0xffffffff815731a1 due to size mismatch (0x60 != 83) no match for write_sysrq_trigger+0x51/0x60 The problem is caused by differences in how kallsyms and faddr2line determine a function's size. kallsyms calculates a function's size by parsing the output of 'nm -n' and subtracting the next function's address from the current function's address. This means that nop instructions after the end of the function are included in the size. In contrast, faddr2line reads the size from the symbol table, which does *not* include the ending nops in the function's size. Change faddr2line to calculate the size from the output of 'nm -n' to be consistent with kallsyms and oops outputs. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/bd313ed7c4003f6b1fda63e825325c44a9d837de.1477405374.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 14:51:11 +00:00
addr=0x$(printf %x $addr)
# If the user provided a size, make sure it matches the symbol's size:
if [[ -n $user_size ]] && [[ $user_size -ne $sym_size ]]; then
[[ $print_warnings = 1 ]] &&
echo "skipping $sym_name address at $addr due to size mismatch ($user_size != $sym_size)"
continue;
fi
# Make sure the provided offset is within the symbol's range:
if [[ $func_offset -gt $sym_size ]]; then
[[ $print_warnings = 1 ]] &&
echo "skipping $sym_name address at $addr due to size mismatch ($func_offset > $sym_size)"
continue
fi
# In case of duplicates or multiple addresses specified on the
# cmdline, separate multiple entries with a blank line:
[[ $FIRST = 0 ]] && echo
FIRST=0
echo "$sym_name+$func_offset/$sym_size:"
scripts/faddr2line: show the code context Inspired by gdb command 'list', show the code context of target lines. Here is a example: $ scripts/faddr2line vmlinux native_write_msr+0x6 native_write_msr+0x6/0x20: arch_static_branch at arch/x86/include/asm/msr.h:105 100 return EAX_EDX_VAL(val, low, high); 101 } 102 103 static inline void notrace __wrmsr(unsigned int msr, u32 low, u32 high) 104 { 105 asm volatile("1: wrmsr\n" 106 "2:\n" 107 _ASM_EXTABLE_HANDLE(1b, 2b, ex_handler_wrmsr_unsafe) 108 : : "c" (msr), "a"(low), "d" (high) : "memory"); 109 } 110 (inlined by) static_key_false at include/linux/jump_label.h:142 137 #define JUMP_TYPE_LINKED 2UL 138 #define JUMP_TYPE_MASK 3UL 139 140 static __always_inline bool static_key_false(struct static_key *key) 141 { 142 return arch_static_branch(key, false); 143 } 144 145 static __always_inline bool static_key_true(struct static_key *key) 146 { 147 return !arch_static_branch(key, true); (inlined by) native_write_msr at arch/x86/include/asm/msr.h:150 145 static inline void notrace 146 native_write_msr(unsigned int msr, u32 low, u32 high) 147 { 148 __wrmsr(msr, low, high); 149 150 if (msr_tracepoint_active(__tracepoint_write_msr)) 151 do_trace_write_msr(msr, ((u64)high << 32 | low), 0); 152 } 153 154 /* Can be uninlined because referenced by paravirt */ 155 static inline int notrace Link: http://lkml.kernel.org/r/1521444205-2259-1-git-send-email-changbin.du@intel.com Signed-off-by: Changbin Du <changbin.du@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: NeilBrown <neilb@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-05 23:18:29 +00:00
# Pass section address to addr2line and strip absolute paths
# from the output:
local args="--functions --pretty-print --inlines --exe=$objfile"
[[ $is_vmlinux = 0 ]] && args="$args --section=$sec_name"
local output=$(${ADDR2LINE} $args $addr | sed "s; $dir_prefix\(\./\)*; ;")
[[ -z $output ]] && continue
# Default output (non --list):
if [[ $LIST = 0 ]]; then
echo "$output" | while read -r line
do
echo $line
done
DONE=1;
continue
fi
# For --list, show each line with its corresponding source code:
echo "$output" | while read -r line
scripts/faddr2line: show the code context Inspired by gdb command 'list', show the code context of target lines. Here is a example: $ scripts/faddr2line vmlinux native_write_msr+0x6 native_write_msr+0x6/0x20: arch_static_branch at arch/x86/include/asm/msr.h:105 100 return EAX_EDX_VAL(val, low, high); 101 } 102 103 static inline void notrace __wrmsr(unsigned int msr, u32 low, u32 high) 104 { 105 asm volatile("1: wrmsr\n" 106 "2:\n" 107 _ASM_EXTABLE_HANDLE(1b, 2b, ex_handler_wrmsr_unsafe) 108 : : "c" (msr), "a"(low), "d" (high) : "memory"); 109 } 110 (inlined by) static_key_false at include/linux/jump_label.h:142 137 #define JUMP_TYPE_LINKED 2UL 138 #define JUMP_TYPE_MASK 3UL 139 140 static __always_inline bool static_key_false(struct static_key *key) 141 { 142 return arch_static_branch(key, false); 143 } 144 145 static __always_inline bool static_key_true(struct static_key *key) 146 { 147 return !arch_static_branch(key, true); (inlined by) native_write_msr at arch/x86/include/asm/msr.h:150 145 static inline void notrace 146 native_write_msr(unsigned int msr, u32 low, u32 high) 147 { 148 __wrmsr(msr, low, high); 149 150 if (msr_tracepoint_active(__tracepoint_write_msr)) 151 do_trace_write_msr(msr, ((u64)high << 32 | low), 0); 152 } 153 154 /* Can be uninlined because referenced by paravirt */ 155 static inline int notrace Link: http://lkml.kernel.org/r/1521444205-2259-1-git-send-email-changbin.du@intel.com Signed-off-by: Changbin Du <changbin.du@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: NeilBrown <neilb@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-05 23:18:29 +00:00
do
echo
scripts/faddr2line: show the code context Inspired by gdb command 'list', show the code context of target lines. Here is a example: $ scripts/faddr2line vmlinux native_write_msr+0x6 native_write_msr+0x6/0x20: arch_static_branch at arch/x86/include/asm/msr.h:105 100 return EAX_EDX_VAL(val, low, high); 101 } 102 103 static inline void notrace __wrmsr(unsigned int msr, u32 low, u32 high) 104 { 105 asm volatile("1: wrmsr\n" 106 "2:\n" 107 _ASM_EXTABLE_HANDLE(1b, 2b, ex_handler_wrmsr_unsafe) 108 : : "c" (msr), "a"(low), "d" (high) : "memory"); 109 } 110 (inlined by) static_key_false at include/linux/jump_label.h:142 137 #define JUMP_TYPE_LINKED 2UL 138 #define JUMP_TYPE_MASK 3UL 139 140 static __always_inline bool static_key_false(struct static_key *key) 141 { 142 return arch_static_branch(key, false); 143 } 144 145 static __always_inline bool static_key_true(struct static_key *key) 146 { 147 return !arch_static_branch(key, true); (inlined by) native_write_msr at arch/x86/include/asm/msr.h:150 145 static inline void notrace 146 native_write_msr(unsigned int msr, u32 low, u32 high) 147 { 148 __wrmsr(msr, low, high); 149 150 if (msr_tracepoint_active(__tracepoint_write_msr)) 151 do_trace_write_msr(msr, ((u64)high << 32 | low), 0); 152 } 153 154 /* Can be uninlined because referenced by paravirt */ 155 static inline int notrace Link: http://lkml.kernel.org/r/1521444205-2259-1-git-send-email-changbin.du@intel.com Signed-off-by: Changbin Du <changbin.du@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: NeilBrown <neilb@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-05 23:18:29 +00:00
echo $line
n=$(echo $line | sed 's/.*:\([0-9]\+\).*/\1/g')
n1=$[$n-5]
n2=$[$n+5]
f=$(echo $line | sed 's/.*at \(.\+\):.*/\1/g')
${AWK} 'NR>=strtonum("'$n1'") && NR<=strtonum("'$n2'") { if (NR=='$n') printf(">%d<", NR); else printf(" %d ", NR); printf("\t%s\n", $0)}' $f
scripts/faddr2line: show the code context Inspired by gdb command 'list', show the code context of target lines. Here is a example: $ scripts/faddr2line vmlinux native_write_msr+0x6 native_write_msr+0x6/0x20: arch_static_branch at arch/x86/include/asm/msr.h:105 100 return EAX_EDX_VAL(val, low, high); 101 } 102 103 static inline void notrace __wrmsr(unsigned int msr, u32 low, u32 high) 104 { 105 asm volatile("1: wrmsr\n" 106 "2:\n" 107 _ASM_EXTABLE_HANDLE(1b, 2b, ex_handler_wrmsr_unsafe) 108 : : "c" (msr), "a"(low), "d" (high) : "memory"); 109 } 110 (inlined by) static_key_false at include/linux/jump_label.h:142 137 #define JUMP_TYPE_LINKED 2UL 138 #define JUMP_TYPE_MASK 3UL 139 140 static __always_inline bool static_key_false(struct static_key *key) 141 { 142 return arch_static_branch(key, false); 143 } 144 145 static __always_inline bool static_key_true(struct static_key *key) 146 { 147 return !arch_static_branch(key, true); (inlined by) native_write_msr at arch/x86/include/asm/msr.h:150 145 static inline void notrace 146 native_write_msr(unsigned int msr, u32 low, u32 high) 147 { 148 __wrmsr(msr, low, high); 149 150 if (msr_tracepoint_active(__tracepoint_write_msr)) 151 do_trace_write_msr(msr, ((u64)high << 32 | low), 0); 152 } 153 154 /* Can be uninlined because referenced by paravirt */ 155 static inline int notrace Link: http://lkml.kernel.org/r/1521444205-2259-1-git-send-email-changbin.du@intel.com Signed-off-by: Changbin Du <changbin.du@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: NeilBrown <neilb@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-05 23:18:29 +00:00
done
DONE=1
done < <(${READELF} --symbols --wide $objfile | ${AWK} -v fn=$sym_name '$4 == "FUNC" && $8 == fn')
}
[[ $# -lt 2 ]] && usage
objfile=$1
LIST=0
[[ "$objfile" == "--list" ]] && LIST=1 && shift && objfile=$1
[[ ! -f $objfile ]] && die "can't find objfile $objfile"
shift
${READELF} --section-headers --wide $objfile | ${GREP} -q '\.debug_info' || die "CONFIG_DEBUG_INFO not enabled"
DIR_PREFIX=supercalifragilisticexpialidocious
find_dir_prefix $objfile
FIRST=1
while [[ $# -gt 0 ]]; do
func_addr=$1
shift
# print any matches found
DONE=0
__faddr2line $objfile $func_addr $DIR_PREFIX 0
# if no match was found, print warnings
if [[ $DONE = 0 ]]; then
__faddr2line $objfile $func_addr $DIR_PREFIX 1
warn "no match for $func_addr"
fi
done