linux-stable/block/bio.c

2143 lines
51 KiB
C
Raw Normal View History

/*
* Copyright (C) 2001 Jens Axboe <axboe@kernel.dk>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public Licens
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-
*
*/
#include <linux/mm.h>
#include <linux/swap.h>
#include <linux/bio.h>
#include <linux/blkdev.h>
#include <linux/uio.h>
block: implement bio_associate_current() IO scheduling and cgroup are tied to the issuing task via io_context and cgroup of %current. Unfortunately, there are cases where IOs need to be routed via a different task which makes scheduling and cgroup limit enforcement applied completely incorrectly. For example, all bios delayed by blk-throttle end up being issued by a delayed work item and get assigned the io_context of the worker task which happens to serve the work item and dumped to the default block cgroup. This is double confusing as bios which aren't delayed end up in the correct cgroup and makes using blk-throttle and cfq propio together impossible. Any code which punts IO issuing to another task is affected which is getting more and more common (e.g. btrfs). As both io_context and cgroup are firmly tied to task including userland visible APIs to manipulate them, it makes a lot of sense to match up tasks to bios. This patch implements bio_associate_current() which associates the specified bio with %current. The bio will record the associated ioc and blkcg at that point and block layer will use the recorded ones regardless of which task actually ends up issuing the bio. bio release puts the associated ioc and blkcg. It grabs and remembers ioc and blkcg instead of the task itself because task may already be dead by the time the bio is issued making ioc and blkcg inaccessible and those are all block layer cares about. elevator_set_req_fn() is updated such that the bio elvdata is being allocated for is available to the elevator. This doesn't update block cgroup policies yet. Further patches will implement the support. -v2: #ifdef CONFIG_BLK_CGROUP added around bio->bi_ioc dereference in rq_ioc() to fix build breakage. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Kent Overstreet <koverstreet@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-05 21:15:27 +00:00
#include <linux/iocontext.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/export.h>
#include <linux/mempool.h>
#include <linux/workqueue.h>
block: implement bio_associate_current() IO scheduling and cgroup are tied to the issuing task via io_context and cgroup of %current. Unfortunately, there are cases where IOs need to be routed via a different task which makes scheduling and cgroup limit enforcement applied completely incorrectly. For example, all bios delayed by blk-throttle end up being issued by a delayed work item and get assigned the io_context of the worker task which happens to serve the work item and dumped to the default block cgroup. This is double confusing as bios which aren't delayed end up in the correct cgroup and makes using blk-throttle and cfq propio together impossible. Any code which punts IO issuing to another task is affected which is getting more and more common (e.g. btrfs). As both io_context and cgroup are firmly tied to task including userland visible APIs to manipulate them, it makes a lot of sense to match up tasks to bios. This patch implements bio_associate_current() which associates the specified bio with %current. The bio will record the associated ioc and blkcg at that point and block layer will use the recorded ones regardless of which task actually ends up issuing the bio. bio release puts the associated ioc and blkcg. It grabs and remembers ioc and blkcg instead of the task itself because task may already be dead by the time the bio is issued making ioc and blkcg inaccessible and those are all block layer cares about. elevator_set_req_fn() is updated such that the bio elvdata is being allocated for is available to the elevator. This doesn't update block cgroup policies yet. Further patches will implement the support. -v2: #ifdef CONFIG_BLK_CGROUP added around bio->bi_ioc dereference in rq_ioc() to fix build breakage. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Kent Overstreet <koverstreet@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-05 21:15:27 +00:00
#include <linux/cgroup.h>
tracing/events: convert block trace points to TRACE_EVENT() TRACE_EVENT is a more generic way to define tracepoints. Doing so adds these new capabilities to this tracepoint: - zero-copy and per-cpu splice() tracing - binary tracing without printf overhead - structured logging records exposed under /debug/tracing/events - trace events embedded in function tracer output and other plugins - user-defined, per tracepoint filter expressions ... Cons: - no dev_t info for the output of plug, unplug_timer and unplug_io events. no dev_t info for getrq and sleeprq events if bio == NULL. no dev_t info for rq_abort,...,rq_requeue events if rq->rq_disk == NULL. This is mainly because we can't get the deivce from a request queue. But this may change in the future. - A packet command is converted to a string in TP_assign, not TP_print. While blktrace do the convertion just before output. Since pc requests should be rather rare, this is not a big issue. - In blktrace, an event can have 2 different print formats, but a TRACE_EVENT has a unique format, which means we have some unused data in a trace entry. The overhead is minimized by using __dynamic_array() instead of __array(). I've benchmarked the ioctl blktrace vs the splice based TRACE_EVENT tracing: dd dd + ioctl blktrace dd + TRACE_EVENT (splice) 1 7.36s, 42.7 MB/s 7.50s, 42.0 MB/s 7.41s, 42.5 MB/s 2 7.43s, 42.3 MB/s 7.48s, 42.1 MB/s 7.43s, 42.4 MB/s 3 7.38s, 42.6 MB/s 7.45s, 42.2 MB/s 7.41s, 42.5 MB/s So the overhead of tracing is very small, and no regression when using those trace events vs blktrace. And the binary output of TRACE_EVENT is much smaller than blktrace: # ls -l -h -rw-r--r-- 1 root root 8.8M 06-09 13:24 sda.blktrace.0 -rw-r--r-- 1 root root 195K 06-09 13:24 sda.blktrace.1 -rw-r--r-- 1 root root 2.7M 06-09 13:25 trace_splice.out Following are some comparisons between TRACE_EVENT and blktrace: plug: kjournald-480 [000] 303.084981: block_plug: [kjournald] kjournald-480 [000] 303.084981: 8,0 P N [kjournald] unplug_io: kblockd/0-118 [000] 300.052973: block_unplug_io: [kblockd/0] 1 kblockd/0-118 [000] 300.052974: 8,0 U N [kblockd/0] 1 remap: kjournald-480 [000] 303.085042: block_remap: 8,0 W 102736992 + 8 <- (8,8) 33384 kjournald-480 [000] 303.085043: 8,0 A W 102736992 + 8 <- (8,8) 33384 bio_backmerge: kjournald-480 [000] 303.085086: block_bio_backmerge: 8,0 W 102737032 + 8 [kjournald] kjournald-480 [000] 303.085086: 8,0 M W 102737032 + 8 [kjournald] getrq: kjournald-480 [000] 303.084974: block_getrq: 8,0 W 102736984 + 8 [kjournald] kjournald-480 [000] 303.084975: 8,0 G W 102736984 + 8 [kjournald] bash-2066 [001] 1072.953770: 8,0 G N [bash] bash-2066 [001] 1072.953773: block_getrq: 0,0 N 0 + 0 [bash] rq_complete: konsole-2065 [001] 300.053184: block_rq_complete: 8,0 W () 103669040 + 16 [0] konsole-2065 [001] 300.053191: 8,0 C W 103669040 + 16 [0] ksoftirqd/1-7 [001] 1072.953811: 8,0 C N (5a 00 08 00 00 00 00 00 24 00) [0] ksoftirqd/1-7 [001] 1072.953813: block_rq_complete: 0,0 N (5a 00 08 00 00 00 00 00 24 00) 0 + 0 [0] rq_insert: kjournald-480 [000] 303.084985: block_rq_insert: 8,0 W 0 () 102736984 + 8 [kjournald] kjournald-480 [000] 303.084986: 8,0 I W 102736984 + 8 [kjournald] Changelog from v2 -> v3: - use the newly introduced __dynamic_array(). Changelog from v1 -> v2: - use __string() instead of __array() to minimize the memory required to store hex dump of rq->cmd(). - support large pc requests. - add missing blk_fill_rwbs_rq() in block_rq_requeue TRACE_EVENT. - some cleanups. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <4A2DF669.5070905@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-09 05:43:05 +00:00
#include <trace/events/block.h>
/*
* Test patch to inline a certain number of bi_io_vec's inside the bio
* itself, to shrink a bio data allocation from two mempool calls to one
*/
#define BIO_INLINE_VECS 4
/*
* if you change this list, also change bvec_alloc or things will
* break badly! cannot be bigger than what you can fit into an
* unsigned short
*/
#define BV(x) { .nr_vecs = x, .name = "biovec-"__stringify(x) }
static struct biovec_slab bvec_slabs[BVEC_POOL_NR] __read_mostly = {
BV(1), BV(4), BV(16), BV(64), BV(128), BV(BIO_MAX_PAGES),
};
#undef BV
/*
* fs_bio_set is the bio_set containing bio and iovec memory pools used by
* IO code that does not need private memory pools.
*/
struct bio_set *fs_bio_set;
EXPORT_SYMBOL(fs_bio_set);
/*
* Our slab pool management
*/
struct bio_slab {
struct kmem_cache *slab;
unsigned int slab_ref;
unsigned int slab_size;
char name[8];
};
static DEFINE_MUTEX(bio_slab_lock);
static struct bio_slab *bio_slabs;
static unsigned int bio_slab_nr, bio_slab_max;
static struct kmem_cache *bio_find_or_create_slab(unsigned int extra_size)
{
unsigned int sz = sizeof(struct bio) + extra_size;
struct kmem_cache *slab = NULL;
struct bio_slab *bslab, *new_bio_slabs;
unsigned int new_bio_slab_max;
unsigned int i, entry = -1;
mutex_lock(&bio_slab_lock);
i = 0;
while (i < bio_slab_nr) {
bslab = &bio_slabs[i];
if (!bslab->slab && entry == -1)
entry = i;
else if (bslab->slab_size == sz) {
slab = bslab->slab;
bslab->slab_ref++;
break;
}
i++;
}
if (slab)
goto out_unlock;
if (bio_slab_nr == bio_slab_max && entry == -1) {
new_bio_slab_max = bio_slab_max << 1;
new_bio_slabs = krealloc(bio_slabs,
new_bio_slab_max * sizeof(struct bio_slab),
GFP_KERNEL);
if (!new_bio_slabs)
goto out_unlock;
bio_slab_max = new_bio_slab_max;
bio_slabs = new_bio_slabs;
}
if (entry == -1)
entry = bio_slab_nr++;
bslab = &bio_slabs[entry];
snprintf(bslab->name, sizeof(bslab->name), "bio-%d", entry);
slab = kmem_cache_create(bslab->name, sz, ARCH_KMALLOC_MINALIGN,
SLAB_HWCACHE_ALIGN, NULL);
if (!slab)
goto out_unlock;
bslab->slab = slab;
bslab->slab_ref = 1;
bslab->slab_size = sz;
out_unlock:
mutex_unlock(&bio_slab_lock);
return slab;
}
static void bio_put_slab(struct bio_set *bs)
{
struct bio_slab *bslab = NULL;
unsigned int i;
mutex_lock(&bio_slab_lock);
for (i = 0; i < bio_slab_nr; i++) {
if (bs->bio_slab == bio_slabs[i].slab) {
bslab = &bio_slabs[i];
break;
}
}
if (WARN(!bslab, KERN_ERR "bio: unable to find slab!\n"))
goto out;
WARN_ON(!bslab->slab_ref);
if (--bslab->slab_ref)
goto out;
kmem_cache_destroy(bslab->slab);
bslab->slab = NULL;
out:
mutex_unlock(&bio_slab_lock);
}
unsigned int bvec_nr_vecs(unsigned short idx)
{
return bvec_slabs[idx].nr_vecs;
}
void bvec_free(mempool_t *pool, struct bio_vec *bv, unsigned int idx)
{
if (!idx)
return;
idx--;
BIO_BUG_ON(idx >= BVEC_POOL_NR);
if (idx == BVEC_POOL_MAX) {
mempool_free(bv, pool);
} else {
struct biovec_slab *bvs = bvec_slabs + idx;
kmem_cache_free(bvs->slab, bv);
}
}
struct bio_vec *bvec_alloc(gfp_t gfp_mask, int nr, unsigned long *idx,
mempool_t *pool)
{
struct bio_vec *bvl;
/*
* see comment near bvec_array define!
*/
switch (nr) {
case 1:
*idx = 0;
break;
case 2 ... 4:
*idx = 1;
break;
case 5 ... 16:
*idx = 2;
break;
case 17 ... 64:
*idx = 3;
break;
case 65 ... 128:
*idx = 4;
break;
case 129 ... BIO_MAX_PAGES:
*idx = 5;
break;
default:
return NULL;
}
/*
* idx now points to the pool we want to allocate from. only the
* 1-vec entry pool is mempool backed.
*/
if (*idx == BVEC_POOL_MAX) {
fallback:
bvl = mempool_alloc(pool, gfp_mask);
} else {
struct biovec_slab *bvs = bvec_slabs + *idx;
mm, page_alloc: distinguish between being unable to sleep, unwilling to sleep and avoiding waking kswapd __GFP_WAIT has been used to identify atomic context in callers that hold spinlocks or are in interrupts. They are expected to be high priority and have access one of two watermarks lower than "min" which can be referred to as the "atomic reserve". __GFP_HIGH users get access to the first lower watermark and can be called the "high priority reserve". Over time, callers had a requirement to not block when fallback options were available. Some have abused __GFP_WAIT leading to a situation where an optimisitic allocation with a fallback option can access atomic reserves. This patch uses __GFP_ATOMIC to identify callers that are truely atomic, cannot sleep and have no alternative. High priority users continue to use __GFP_HIGH. __GFP_DIRECT_RECLAIM identifies callers that can sleep and are willing to enter direct reclaim. __GFP_KSWAPD_RECLAIM to identify callers that want to wake kswapd for background reclaim. __GFP_WAIT is redefined as a caller that is willing to enter direct reclaim and wake kswapd for background reclaim. This patch then converts a number of sites o __GFP_ATOMIC is used by callers that are high priority and have memory pools for those requests. GFP_ATOMIC uses this flag. o Callers that have a limited mempool to guarantee forward progress clear __GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall into this category where kswapd will still be woken but atomic reserves are not used as there is a one-entry mempool to guarantee progress. o Callers that are checking if they are non-blocking should use the helper gfpflags_allow_blocking() where possible. This is because checking for __GFP_WAIT as was done historically now can trigger false positives. Some exceptions like dm-crypt.c exist where the code intent is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to flag manipulations. o Callers that built their own GFP flags instead of starting with GFP_KERNEL and friends now also need to specify __GFP_KSWAPD_RECLAIM. The first key hazard to watch out for is callers that removed __GFP_WAIT and was depending on access to atomic reserves for inconspicuous reasons. In some cases it may be appropriate for them to use __GFP_HIGH. The second key hazard is callers that assembled their own combination of GFP flags instead of starting with something like GFP_KERNEL. They may now wish to specify __GFP_KSWAPD_RECLAIM. It's almost certainly harmless if it's missed in most cases as other activity will wake kswapd. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-07 00:28:21 +00:00
gfp_t __gfp_mask = gfp_mask & ~(__GFP_DIRECT_RECLAIM | __GFP_IO);
/*
* Make this allocation restricted and don't dump info on
* allocation failures, since we'll fallback to the mempool
* in case of failure.
*/
__gfp_mask |= __GFP_NOMEMALLOC | __GFP_NORETRY | __GFP_NOWARN;
/*
mm, page_alloc: distinguish between being unable to sleep, unwilling to sleep and avoiding waking kswapd __GFP_WAIT has been used to identify atomic context in callers that hold spinlocks or are in interrupts. They are expected to be high priority and have access one of two watermarks lower than "min" which can be referred to as the "atomic reserve". __GFP_HIGH users get access to the first lower watermark and can be called the "high priority reserve". Over time, callers had a requirement to not block when fallback options were available. Some have abused __GFP_WAIT leading to a situation where an optimisitic allocation with a fallback option can access atomic reserves. This patch uses __GFP_ATOMIC to identify callers that are truely atomic, cannot sleep and have no alternative. High priority users continue to use __GFP_HIGH. __GFP_DIRECT_RECLAIM identifies callers that can sleep and are willing to enter direct reclaim. __GFP_KSWAPD_RECLAIM to identify callers that want to wake kswapd for background reclaim. __GFP_WAIT is redefined as a caller that is willing to enter direct reclaim and wake kswapd for background reclaim. This patch then converts a number of sites o __GFP_ATOMIC is used by callers that are high priority and have memory pools for those requests. GFP_ATOMIC uses this flag. o Callers that have a limited mempool to guarantee forward progress clear __GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall into this category where kswapd will still be woken but atomic reserves are not used as there is a one-entry mempool to guarantee progress. o Callers that are checking if they are non-blocking should use the helper gfpflags_allow_blocking() where possible. This is because checking for __GFP_WAIT as was done historically now can trigger false positives. Some exceptions like dm-crypt.c exist where the code intent is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to flag manipulations. o Callers that built their own GFP flags instead of starting with GFP_KERNEL and friends now also need to specify __GFP_KSWAPD_RECLAIM. The first key hazard to watch out for is callers that removed __GFP_WAIT and was depending on access to atomic reserves for inconspicuous reasons. In some cases it may be appropriate for them to use __GFP_HIGH. The second key hazard is callers that assembled their own combination of GFP flags instead of starting with something like GFP_KERNEL. They may now wish to specify __GFP_KSWAPD_RECLAIM. It's almost certainly harmless if it's missed in most cases as other activity will wake kswapd. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-07 00:28:21 +00:00
* Try a slab allocation. If this fails and __GFP_DIRECT_RECLAIM
* is set, retry with the 1-entry mempool
*/
bvl = kmem_cache_alloc(bvs->slab, __gfp_mask);
mm, page_alloc: distinguish between being unable to sleep, unwilling to sleep and avoiding waking kswapd __GFP_WAIT has been used to identify atomic context in callers that hold spinlocks or are in interrupts. They are expected to be high priority and have access one of two watermarks lower than "min" which can be referred to as the "atomic reserve". __GFP_HIGH users get access to the first lower watermark and can be called the "high priority reserve". Over time, callers had a requirement to not block when fallback options were available. Some have abused __GFP_WAIT leading to a situation where an optimisitic allocation with a fallback option can access atomic reserves. This patch uses __GFP_ATOMIC to identify callers that are truely atomic, cannot sleep and have no alternative. High priority users continue to use __GFP_HIGH. __GFP_DIRECT_RECLAIM identifies callers that can sleep and are willing to enter direct reclaim. __GFP_KSWAPD_RECLAIM to identify callers that want to wake kswapd for background reclaim. __GFP_WAIT is redefined as a caller that is willing to enter direct reclaim and wake kswapd for background reclaim. This patch then converts a number of sites o __GFP_ATOMIC is used by callers that are high priority and have memory pools for those requests. GFP_ATOMIC uses this flag. o Callers that have a limited mempool to guarantee forward progress clear __GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall into this category where kswapd will still be woken but atomic reserves are not used as there is a one-entry mempool to guarantee progress. o Callers that are checking if they are non-blocking should use the helper gfpflags_allow_blocking() where possible. This is because checking for __GFP_WAIT as was done historically now can trigger false positives. Some exceptions like dm-crypt.c exist where the code intent is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to flag manipulations. o Callers that built their own GFP flags instead of starting with GFP_KERNEL and friends now also need to specify __GFP_KSWAPD_RECLAIM. The first key hazard to watch out for is callers that removed __GFP_WAIT and was depending on access to atomic reserves for inconspicuous reasons. In some cases it may be appropriate for them to use __GFP_HIGH. The second key hazard is callers that assembled their own combination of GFP flags instead of starting with something like GFP_KERNEL. They may now wish to specify __GFP_KSWAPD_RECLAIM. It's almost certainly harmless if it's missed in most cases as other activity will wake kswapd. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-07 00:28:21 +00:00
if (unlikely(!bvl && (gfp_mask & __GFP_DIRECT_RECLAIM))) {
*idx = BVEC_POOL_MAX;
goto fallback;
}
}
(*idx)++;
return bvl;
}
static void __bio_free(struct bio *bio)
{
bio_disassociate_task(bio);
if (bio_integrity(bio))
bio_integrity_free(bio);
}
static void bio_free(struct bio *bio)
{
struct bio_set *bs = bio->bi_pool;
void *p;
__bio_free(bio);
if (bs) {
bvec_free(bs->bvec_pool, bio->bi_io_vec, BVEC_POOL_IDX(bio));
/*
* If we have front padding, adjust the bio pointer before freeing
*/
p = bio;
p -= bs->front_pad;
mempool_free(p, bs->bio_pool);
} else {
/* Bio was allocated by bio_kmalloc() */
kfree(bio);
}
}
void bio_init(struct bio *bio, struct bio_vec *table,
unsigned short max_vecs)
{
memset(bio, 0, sizeof(*bio));
atomic_set(&bio->__bi_remaining, 1);
atomic_set(&bio->__bi_cnt, 1);
bio->bi_io_vec = table;
bio->bi_max_vecs = max_vecs;
}
EXPORT_SYMBOL(bio_init);
/**
* bio_reset - reinitialize a bio
* @bio: bio to reset
*
* Description:
* After calling bio_reset(), @bio will be in the same state as a freshly
* allocated bio returned bio bio_alloc_bioset() - the only fields that are
* preserved are the ones that are initialized by bio_alloc_bioset(). See
* comment in struct bio.
*/
void bio_reset(struct bio *bio)
{
unsigned long flags = bio->bi_flags & (~0UL << BIO_RESET_BITS);
__bio_free(bio);
memset(bio, 0, BIO_RESET_BYTES);
bio->bi_flags = flags;
atomic_set(&bio->__bi_remaining, 1);
}
EXPORT_SYMBOL(bio_reset);
static struct bio *__bio_chain_endio(struct bio *bio)
{
struct bio *parent = bio->bi_private;
if (!parent->bi_error)
parent->bi_error = bio->bi_error;
bio_put(bio);
return parent;
}
static void bio_chain_endio(struct bio *bio)
{
bio_endio(__bio_chain_endio(bio));
}
/**
* bio_chain - chain bio completions
* @bio: the target bio
* @parent: the @bio's parent bio
*
* The caller won't have a bi_end_io called when @bio completes - instead,
* @parent's bi_end_io won't be called until both @parent and @bio have
* completed; the chained bio will also be freed when it completes.
*
* The caller must not set bi_private or bi_end_io in @bio.
*/
void bio_chain(struct bio *bio, struct bio *parent)
{
BUG_ON(bio->bi_private || bio->bi_end_io);
bio->bi_private = parent;
bio->bi_end_io = bio_chain_endio;
bio_inc_remaining(parent);
}
EXPORT_SYMBOL(bio_chain);
block: Avoid deadlocks with bio allocation by stacking drivers Previously, if we ever try to allocate more than once from the same bio set while running under generic_make_request() (i.e. a stacking block driver), we risk deadlock. This is because of the code in generic_make_request() that converts recursion to iteration; any bios we submit won't actually be submitted (so they can complete and eventually be freed) until after we return - this means if we allocate a second bio, we're blocking the first one from ever being freed. Thus if enough threads call into a stacking block driver at the same time with bios that need multiple splits, and the bio_set's reserve gets used up, we deadlock. This can be worked around in the driver code - we could check if we're running under generic_make_request(), then mask out __GFP_WAIT when we go to allocate a bio, and if the allocation fails punt to workqueue and retry the allocation. But this is tricky and not a generic solution. This patch solves it for all users by inverting the previously described technique. We allocate a rescuer workqueue for each bio_set, and then in the allocation code if there are bios on current->bio_list we would be blocking, we punt them to the rescuer workqueue to be submitted. This guarantees forward progress for bio allocations under generic_make_request() provided each bio is submitted before allocating the next, and provided the bios are freed after they complete. Note that this doesn't do anything for allocation from other mempools. Instead of allocating per bio data structures from a mempool, code should use bio_set's front_pad. Tested it by forcing the rescue codepath to be taken (by disabling the first GFP_NOWAIT) attempt, and then ran it with bcache (which does a lot of arbitrary bio splitting) and verified that the rescuer was being invoked. Signed-off-by: Kent Overstreet <koverstreet@google.com> CC: Jens Axboe <axboe@kernel.dk> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Muthukumar Ratty <muthur@gmail.com>
2012-09-10 21:33:46 +00:00
static void bio_alloc_rescue(struct work_struct *work)
{
struct bio_set *bs = container_of(work, struct bio_set, rescue_work);
struct bio *bio;
while (1) {
spin_lock(&bs->rescue_lock);
bio = bio_list_pop(&bs->rescue_list);
spin_unlock(&bs->rescue_lock);
if (!bio)
break;
generic_make_request(bio);
}
}
static void punt_bios_to_rescuer(struct bio_set *bs)
{
struct bio_list punt, nopunt;
struct bio *bio;
/*
* In order to guarantee forward progress we must punt only bios that
* were allocated from this bio_set; otherwise, if there was a bio on
* there for a stacking driver higher up in the stack, processing it
* could require allocating bios from this bio_set, and doing that from
* our own rescuer would be bad.
*
* Since bio lists are singly linked, pop them all instead of trying to
* remove from the middle of the list:
*/
bio_list_init(&punt);
bio_list_init(&nopunt);
while ((bio = bio_list_pop(&current->bio_list[0])))
block: Avoid deadlocks with bio allocation by stacking drivers Previously, if we ever try to allocate more than once from the same bio set while running under generic_make_request() (i.e. a stacking block driver), we risk deadlock. This is because of the code in generic_make_request() that converts recursion to iteration; any bios we submit won't actually be submitted (so they can complete and eventually be freed) until after we return - this means if we allocate a second bio, we're blocking the first one from ever being freed. Thus if enough threads call into a stacking block driver at the same time with bios that need multiple splits, and the bio_set's reserve gets used up, we deadlock. This can be worked around in the driver code - we could check if we're running under generic_make_request(), then mask out __GFP_WAIT when we go to allocate a bio, and if the allocation fails punt to workqueue and retry the allocation. But this is tricky and not a generic solution. This patch solves it for all users by inverting the previously described technique. We allocate a rescuer workqueue for each bio_set, and then in the allocation code if there are bios on current->bio_list we would be blocking, we punt them to the rescuer workqueue to be submitted. This guarantees forward progress for bio allocations under generic_make_request() provided each bio is submitted before allocating the next, and provided the bios are freed after they complete. Note that this doesn't do anything for allocation from other mempools. Instead of allocating per bio data structures from a mempool, code should use bio_set's front_pad. Tested it by forcing the rescue codepath to be taken (by disabling the first GFP_NOWAIT) attempt, and then ran it with bcache (which does a lot of arbitrary bio splitting) and verified that the rescuer was being invoked. Signed-off-by: Kent Overstreet <koverstreet@google.com> CC: Jens Axboe <axboe@kernel.dk> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Muthukumar Ratty <muthur@gmail.com>
2012-09-10 21:33:46 +00:00
bio_list_add(bio->bi_pool == bs ? &punt : &nopunt, bio);
current->bio_list[0] = nopunt;
block: Avoid deadlocks with bio allocation by stacking drivers Previously, if we ever try to allocate more than once from the same bio set while running under generic_make_request() (i.e. a stacking block driver), we risk deadlock. This is because of the code in generic_make_request() that converts recursion to iteration; any bios we submit won't actually be submitted (so they can complete and eventually be freed) until after we return - this means if we allocate a second bio, we're blocking the first one from ever being freed. Thus if enough threads call into a stacking block driver at the same time with bios that need multiple splits, and the bio_set's reserve gets used up, we deadlock. This can be worked around in the driver code - we could check if we're running under generic_make_request(), then mask out __GFP_WAIT when we go to allocate a bio, and if the allocation fails punt to workqueue and retry the allocation. But this is tricky and not a generic solution. This patch solves it for all users by inverting the previously described technique. We allocate a rescuer workqueue for each bio_set, and then in the allocation code if there are bios on current->bio_list we would be blocking, we punt them to the rescuer workqueue to be submitted. This guarantees forward progress for bio allocations under generic_make_request() provided each bio is submitted before allocating the next, and provided the bios are freed after they complete. Note that this doesn't do anything for allocation from other mempools. Instead of allocating per bio data structures from a mempool, code should use bio_set's front_pad. Tested it by forcing the rescue codepath to be taken (by disabling the first GFP_NOWAIT) attempt, and then ran it with bcache (which does a lot of arbitrary bio splitting) and verified that the rescuer was being invoked. Signed-off-by: Kent Overstreet <koverstreet@google.com> CC: Jens Axboe <axboe@kernel.dk> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Muthukumar Ratty <muthur@gmail.com>
2012-09-10 21:33:46 +00:00
bio_list_init(&nopunt);
while ((bio = bio_list_pop(&current->bio_list[1])))
bio_list_add(bio->bi_pool == bs ? &punt : &nopunt, bio);
current->bio_list[1] = nopunt;
block: Avoid deadlocks with bio allocation by stacking drivers Previously, if we ever try to allocate more than once from the same bio set while running under generic_make_request() (i.e. a stacking block driver), we risk deadlock. This is because of the code in generic_make_request() that converts recursion to iteration; any bios we submit won't actually be submitted (so they can complete and eventually be freed) until after we return - this means if we allocate a second bio, we're blocking the first one from ever being freed. Thus if enough threads call into a stacking block driver at the same time with bios that need multiple splits, and the bio_set's reserve gets used up, we deadlock. This can be worked around in the driver code - we could check if we're running under generic_make_request(), then mask out __GFP_WAIT when we go to allocate a bio, and if the allocation fails punt to workqueue and retry the allocation. But this is tricky and not a generic solution. This patch solves it for all users by inverting the previously described technique. We allocate a rescuer workqueue for each bio_set, and then in the allocation code if there are bios on current->bio_list we would be blocking, we punt them to the rescuer workqueue to be submitted. This guarantees forward progress for bio allocations under generic_make_request() provided each bio is submitted before allocating the next, and provided the bios are freed after they complete. Note that this doesn't do anything for allocation from other mempools. Instead of allocating per bio data structures from a mempool, code should use bio_set's front_pad. Tested it by forcing the rescue codepath to be taken (by disabling the first GFP_NOWAIT) attempt, and then ran it with bcache (which does a lot of arbitrary bio splitting) and verified that the rescuer was being invoked. Signed-off-by: Kent Overstreet <koverstreet@google.com> CC: Jens Axboe <axboe@kernel.dk> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Muthukumar Ratty <muthur@gmail.com>
2012-09-10 21:33:46 +00:00
spin_lock(&bs->rescue_lock);
bio_list_merge(&bs->rescue_list, &punt);
spin_unlock(&bs->rescue_lock);
queue_work(bs->rescue_workqueue, &bs->rescue_work);
}
/**
* bio_alloc_bioset - allocate a bio for I/O
* @gfp_mask: the GFP_ mask given to the slab allocator
* @nr_iovecs: number of iovecs to pre-allocate
* @bs: the bio_set to allocate from.
*
* Description:
* If @bs is NULL, uses kmalloc() to allocate the bio; else the allocation is
* backed by the @bs's mempool.
*
mm, page_alloc: distinguish between being unable to sleep, unwilling to sleep and avoiding waking kswapd __GFP_WAIT has been used to identify atomic context in callers that hold spinlocks or are in interrupts. They are expected to be high priority and have access one of two watermarks lower than "min" which can be referred to as the "atomic reserve". __GFP_HIGH users get access to the first lower watermark and can be called the "high priority reserve". Over time, callers had a requirement to not block when fallback options were available. Some have abused __GFP_WAIT leading to a situation where an optimisitic allocation with a fallback option can access atomic reserves. This patch uses __GFP_ATOMIC to identify callers that are truely atomic, cannot sleep and have no alternative. High priority users continue to use __GFP_HIGH. __GFP_DIRECT_RECLAIM identifies callers that can sleep and are willing to enter direct reclaim. __GFP_KSWAPD_RECLAIM to identify callers that want to wake kswapd for background reclaim. __GFP_WAIT is redefined as a caller that is willing to enter direct reclaim and wake kswapd for background reclaim. This patch then converts a number of sites o __GFP_ATOMIC is used by callers that are high priority and have memory pools for those requests. GFP_ATOMIC uses this flag. o Callers that have a limited mempool to guarantee forward progress clear __GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall into this category where kswapd will still be woken but atomic reserves are not used as there is a one-entry mempool to guarantee progress. o Callers that are checking if they are non-blocking should use the helper gfpflags_allow_blocking() where possible. This is because checking for __GFP_WAIT as was done historically now can trigger false positives. Some exceptions like dm-crypt.c exist where the code intent is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to flag manipulations. o Callers that built their own GFP flags instead of starting with GFP_KERNEL and friends now also need to specify __GFP_KSWAPD_RECLAIM. The first key hazard to watch out for is callers that removed __GFP_WAIT and was depending on access to atomic reserves for inconspicuous reasons. In some cases it may be appropriate for them to use __GFP_HIGH. The second key hazard is callers that assembled their own combination of GFP flags instead of starting with something like GFP_KERNEL. They may now wish to specify __GFP_KSWAPD_RECLAIM. It's almost certainly harmless if it's missed in most cases as other activity will wake kswapd. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-07 00:28:21 +00:00
* When @bs is not NULL, if %__GFP_DIRECT_RECLAIM is set then bio_alloc will
* always be able to allocate a bio. This is due to the mempool guarantees.
* To make this work, callers must never allocate more than 1 bio at a time
* from this pool. Callers that need to allocate more than 1 bio must always
* submit the previously allocated bio for IO before attempting to allocate
* a new one. Failure to do so can cause deadlocks under memory pressure.
*
block: Avoid deadlocks with bio allocation by stacking drivers Previously, if we ever try to allocate more than once from the same bio set while running under generic_make_request() (i.e. a stacking block driver), we risk deadlock. This is because of the code in generic_make_request() that converts recursion to iteration; any bios we submit won't actually be submitted (so they can complete and eventually be freed) until after we return - this means if we allocate a second bio, we're blocking the first one from ever being freed. Thus if enough threads call into a stacking block driver at the same time with bios that need multiple splits, and the bio_set's reserve gets used up, we deadlock. This can be worked around in the driver code - we could check if we're running under generic_make_request(), then mask out __GFP_WAIT when we go to allocate a bio, and if the allocation fails punt to workqueue and retry the allocation. But this is tricky and not a generic solution. This patch solves it for all users by inverting the previously described technique. We allocate a rescuer workqueue for each bio_set, and then in the allocation code if there are bios on current->bio_list we would be blocking, we punt them to the rescuer workqueue to be submitted. This guarantees forward progress for bio allocations under generic_make_request() provided each bio is submitted before allocating the next, and provided the bios are freed after they complete. Note that this doesn't do anything for allocation from other mempools. Instead of allocating per bio data structures from a mempool, code should use bio_set's front_pad. Tested it by forcing the rescue codepath to be taken (by disabling the first GFP_NOWAIT) attempt, and then ran it with bcache (which does a lot of arbitrary bio splitting) and verified that the rescuer was being invoked. Signed-off-by: Kent Overstreet <koverstreet@google.com> CC: Jens Axboe <axboe@kernel.dk> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Muthukumar Ratty <muthur@gmail.com>
2012-09-10 21:33:46 +00:00
* Note that when running under generic_make_request() (i.e. any block
* driver), bios are not submitted until after you return - see the code in
* generic_make_request() that converts recursion into iteration, to prevent
* stack overflows.
*
* This would normally mean allocating multiple bios under
* generic_make_request() would be susceptible to deadlocks, but we have
* deadlock avoidance code that resubmits any blocked bios from a rescuer
* thread.
*
* However, we do not guarantee forward progress for allocations from other
* mempools. Doing multiple allocations from the same mempool under
* generic_make_request() should be avoided - instead, use bio_set's front_pad
* for per bio allocations.
*
* RETURNS:
* Pointer to new bio on success, NULL on failure.
*/
struct bio *bio_alloc_bioset(gfp_t gfp_mask, int nr_iovecs, struct bio_set *bs)
{
block: Avoid deadlocks with bio allocation by stacking drivers Previously, if we ever try to allocate more than once from the same bio set while running under generic_make_request() (i.e. a stacking block driver), we risk deadlock. This is because of the code in generic_make_request() that converts recursion to iteration; any bios we submit won't actually be submitted (so they can complete and eventually be freed) until after we return - this means if we allocate a second bio, we're blocking the first one from ever being freed. Thus if enough threads call into a stacking block driver at the same time with bios that need multiple splits, and the bio_set's reserve gets used up, we deadlock. This can be worked around in the driver code - we could check if we're running under generic_make_request(), then mask out __GFP_WAIT when we go to allocate a bio, and if the allocation fails punt to workqueue and retry the allocation. But this is tricky and not a generic solution. This patch solves it for all users by inverting the previously described technique. We allocate a rescuer workqueue for each bio_set, and then in the allocation code if there are bios on current->bio_list we would be blocking, we punt them to the rescuer workqueue to be submitted. This guarantees forward progress for bio allocations under generic_make_request() provided each bio is submitted before allocating the next, and provided the bios are freed after they complete. Note that this doesn't do anything for allocation from other mempools. Instead of allocating per bio data structures from a mempool, code should use bio_set's front_pad. Tested it by forcing the rescue codepath to be taken (by disabling the first GFP_NOWAIT) attempt, and then ran it with bcache (which does a lot of arbitrary bio splitting) and verified that the rescuer was being invoked. Signed-off-by: Kent Overstreet <koverstreet@google.com> CC: Jens Axboe <axboe@kernel.dk> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Muthukumar Ratty <muthur@gmail.com>
2012-09-10 21:33:46 +00:00
gfp_t saved_gfp = gfp_mask;
unsigned front_pad;
unsigned inline_vecs;
struct bio_vec *bvl = NULL;
struct bio *bio;
void *p;
if (!bs) {
if (nr_iovecs > UIO_MAXIOV)
return NULL;
p = kmalloc(sizeof(struct bio) +
nr_iovecs * sizeof(struct bio_vec),
gfp_mask);
front_pad = 0;
inline_vecs = nr_iovecs;
} else {
/* should not use nobvec bioset for nr_iovecs > 0 */
if (WARN_ON_ONCE(!bs->bvec_pool && nr_iovecs > 0))
return NULL;
block: Avoid deadlocks with bio allocation by stacking drivers Previously, if we ever try to allocate more than once from the same bio set while running under generic_make_request() (i.e. a stacking block driver), we risk deadlock. This is because of the code in generic_make_request() that converts recursion to iteration; any bios we submit won't actually be submitted (so they can complete and eventually be freed) until after we return - this means if we allocate a second bio, we're blocking the first one from ever being freed. Thus if enough threads call into a stacking block driver at the same time with bios that need multiple splits, and the bio_set's reserve gets used up, we deadlock. This can be worked around in the driver code - we could check if we're running under generic_make_request(), then mask out __GFP_WAIT when we go to allocate a bio, and if the allocation fails punt to workqueue and retry the allocation. But this is tricky and not a generic solution. This patch solves it for all users by inverting the previously described technique. We allocate a rescuer workqueue for each bio_set, and then in the allocation code if there are bios on current->bio_list we would be blocking, we punt them to the rescuer workqueue to be submitted. This guarantees forward progress for bio allocations under generic_make_request() provided each bio is submitted before allocating the next, and provided the bios are freed after they complete. Note that this doesn't do anything for allocation from other mempools. Instead of allocating per bio data structures from a mempool, code should use bio_set's front_pad. Tested it by forcing the rescue codepath to be taken (by disabling the first GFP_NOWAIT) attempt, and then ran it with bcache (which does a lot of arbitrary bio splitting) and verified that the rescuer was being invoked. Signed-off-by: Kent Overstreet <koverstreet@google.com> CC: Jens Axboe <axboe@kernel.dk> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Muthukumar Ratty <muthur@gmail.com>
2012-09-10 21:33:46 +00:00
/*
* generic_make_request() converts recursion to iteration; this
* means if we're running beneath it, any bios we allocate and
* submit will not be submitted (and thus freed) until after we
* return.
*
* This exposes us to a potential deadlock if we allocate
* multiple bios from the same bio_set() while running
* underneath generic_make_request(). If we were to allocate
* multiple bios (say a stacking block driver that was splitting
* bios), we would deadlock if we exhausted the mempool's
* reserve.
*
* We solve this, and guarantee forward progress, with a rescuer
* workqueue per bio_set. If we go to allocate and there are
* bios on current->bio_list, we first try the allocation
mm, page_alloc: distinguish between being unable to sleep, unwilling to sleep and avoiding waking kswapd __GFP_WAIT has been used to identify atomic context in callers that hold spinlocks or are in interrupts. They are expected to be high priority and have access one of two watermarks lower than "min" which can be referred to as the "atomic reserve". __GFP_HIGH users get access to the first lower watermark and can be called the "high priority reserve". Over time, callers had a requirement to not block when fallback options were available. Some have abused __GFP_WAIT leading to a situation where an optimisitic allocation with a fallback option can access atomic reserves. This patch uses __GFP_ATOMIC to identify callers that are truely atomic, cannot sleep and have no alternative. High priority users continue to use __GFP_HIGH. __GFP_DIRECT_RECLAIM identifies callers that can sleep and are willing to enter direct reclaim. __GFP_KSWAPD_RECLAIM to identify callers that want to wake kswapd for background reclaim. __GFP_WAIT is redefined as a caller that is willing to enter direct reclaim and wake kswapd for background reclaim. This patch then converts a number of sites o __GFP_ATOMIC is used by callers that are high priority and have memory pools for those requests. GFP_ATOMIC uses this flag. o Callers that have a limited mempool to guarantee forward progress clear __GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall into this category where kswapd will still be woken but atomic reserves are not used as there is a one-entry mempool to guarantee progress. o Callers that are checking if they are non-blocking should use the helper gfpflags_allow_blocking() where possible. This is because checking for __GFP_WAIT as was done historically now can trigger false positives. Some exceptions like dm-crypt.c exist where the code intent is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to flag manipulations. o Callers that built their own GFP flags instead of starting with GFP_KERNEL and friends now also need to specify __GFP_KSWAPD_RECLAIM. The first key hazard to watch out for is callers that removed __GFP_WAIT and was depending on access to atomic reserves for inconspicuous reasons. In some cases it may be appropriate for them to use __GFP_HIGH. The second key hazard is callers that assembled their own combination of GFP flags instead of starting with something like GFP_KERNEL. They may now wish to specify __GFP_KSWAPD_RECLAIM. It's almost certainly harmless if it's missed in most cases as other activity will wake kswapd. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-07 00:28:21 +00:00
* without __GFP_DIRECT_RECLAIM; if that fails, we punt those
* bios we would be blocking to the rescuer workqueue before
* we retry with the original gfp_flags.
block: Avoid deadlocks with bio allocation by stacking drivers Previously, if we ever try to allocate more than once from the same bio set while running under generic_make_request() (i.e. a stacking block driver), we risk deadlock. This is because of the code in generic_make_request() that converts recursion to iteration; any bios we submit won't actually be submitted (so they can complete and eventually be freed) until after we return - this means if we allocate a second bio, we're blocking the first one from ever being freed. Thus if enough threads call into a stacking block driver at the same time with bios that need multiple splits, and the bio_set's reserve gets used up, we deadlock. This can be worked around in the driver code - we could check if we're running under generic_make_request(), then mask out __GFP_WAIT when we go to allocate a bio, and if the allocation fails punt to workqueue and retry the allocation. But this is tricky and not a generic solution. This patch solves it for all users by inverting the previously described technique. We allocate a rescuer workqueue for each bio_set, and then in the allocation code if there are bios on current->bio_list we would be blocking, we punt them to the rescuer workqueue to be submitted. This guarantees forward progress for bio allocations under generic_make_request() provided each bio is submitted before allocating the next, and provided the bios are freed after they complete. Note that this doesn't do anything for allocation from other mempools. Instead of allocating per bio data structures from a mempool, code should use bio_set's front_pad. Tested it by forcing the rescue codepath to be taken (by disabling the first GFP_NOWAIT) attempt, and then ran it with bcache (which does a lot of arbitrary bio splitting) and verified that the rescuer was being invoked. Signed-off-by: Kent Overstreet <koverstreet@google.com> CC: Jens Axboe <axboe@kernel.dk> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Muthukumar Ratty <muthur@gmail.com>
2012-09-10 21:33:46 +00:00
*/
if (current->bio_list &&
(!bio_list_empty(&current->bio_list[0]) ||
!bio_list_empty(&current->bio_list[1])))
mm, page_alloc: distinguish between being unable to sleep, unwilling to sleep and avoiding waking kswapd __GFP_WAIT has been used to identify atomic context in callers that hold spinlocks or are in interrupts. They are expected to be high priority and have access one of two watermarks lower than "min" which can be referred to as the "atomic reserve". __GFP_HIGH users get access to the first lower watermark and can be called the "high priority reserve". Over time, callers had a requirement to not block when fallback options were available. Some have abused __GFP_WAIT leading to a situation where an optimisitic allocation with a fallback option can access atomic reserves. This patch uses __GFP_ATOMIC to identify callers that are truely atomic, cannot sleep and have no alternative. High priority users continue to use __GFP_HIGH. __GFP_DIRECT_RECLAIM identifies callers that can sleep and are willing to enter direct reclaim. __GFP_KSWAPD_RECLAIM to identify callers that want to wake kswapd for background reclaim. __GFP_WAIT is redefined as a caller that is willing to enter direct reclaim and wake kswapd for background reclaim. This patch then converts a number of sites o __GFP_ATOMIC is used by callers that are high priority and have memory pools for those requests. GFP_ATOMIC uses this flag. o Callers that have a limited mempool to guarantee forward progress clear __GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall into this category where kswapd will still be woken but atomic reserves are not used as there is a one-entry mempool to guarantee progress. o Callers that are checking if they are non-blocking should use the helper gfpflags_allow_blocking() where possible. This is because checking for __GFP_WAIT as was done historically now can trigger false positives. Some exceptions like dm-crypt.c exist where the code intent is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to flag manipulations. o Callers that built their own GFP flags instead of starting with GFP_KERNEL and friends now also need to specify __GFP_KSWAPD_RECLAIM. The first key hazard to watch out for is callers that removed __GFP_WAIT and was depending on access to atomic reserves for inconspicuous reasons. In some cases it may be appropriate for them to use __GFP_HIGH. The second key hazard is callers that assembled their own combination of GFP flags instead of starting with something like GFP_KERNEL. They may now wish to specify __GFP_KSWAPD_RECLAIM. It's almost certainly harmless if it's missed in most cases as other activity will wake kswapd. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-07 00:28:21 +00:00
gfp_mask &= ~__GFP_DIRECT_RECLAIM;
block: Avoid deadlocks with bio allocation by stacking drivers Previously, if we ever try to allocate more than once from the same bio set while running under generic_make_request() (i.e. a stacking block driver), we risk deadlock. This is because of the code in generic_make_request() that converts recursion to iteration; any bios we submit won't actually be submitted (so they can complete and eventually be freed) until after we return - this means if we allocate a second bio, we're blocking the first one from ever being freed. Thus if enough threads call into a stacking block driver at the same time with bios that need multiple splits, and the bio_set's reserve gets used up, we deadlock. This can be worked around in the driver code - we could check if we're running under generic_make_request(), then mask out __GFP_WAIT when we go to allocate a bio, and if the allocation fails punt to workqueue and retry the allocation. But this is tricky and not a generic solution. This patch solves it for all users by inverting the previously described technique. We allocate a rescuer workqueue for each bio_set, and then in the allocation code if there are bios on current->bio_list we would be blocking, we punt them to the rescuer workqueue to be submitted. This guarantees forward progress for bio allocations under generic_make_request() provided each bio is submitted before allocating the next, and provided the bios are freed after they complete. Note that this doesn't do anything for allocation from other mempools. Instead of allocating per bio data structures from a mempool, code should use bio_set's front_pad. Tested it by forcing the rescue codepath to be taken (by disabling the first GFP_NOWAIT) attempt, and then ran it with bcache (which does a lot of arbitrary bio splitting) and verified that the rescuer was being invoked. Signed-off-by: Kent Overstreet <koverstreet@google.com> CC: Jens Axboe <axboe@kernel.dk> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Muthukumar Ratty <muthur@gmail.com>
2012-09-10 21:33:46 +00:00
p = mempool_alloc(bs->bio_pool, gfp_mask);
block: Avoid deadlocks with bio allocation by stacking drivers Previously, if we ever try to allocate more than once from the same bio set while running under generic_make_request() (i.e. a stacking block driver), we risk deadlock. This is because of the code in generic_make_request() that converts recursion to iteration; any bios we submit won't actually be submitted (so they can complete and eventually be freed) until after we return - this means if we allocate a second bio, we're blocking the first one from ever being freed. Thus if enough threads call into a stacking block driver at the same time with bios that need multiple splits, and the bio_set's reserve gets used up, we deadlock. This can be worked around in the driver code - we could check if we're running under generic_make_request(), then mask out __GFP_WAIT when we go to allocate a bio, and if the allocation fails punt to workqueue and retry the allocation. But this is tricky and not a generic solution. This patch solves it for all users by inverting the previously described technique. We allocate a rescuer workqueue for each bio_set, and then in the allocation code if there are bios on current->bio_list we would be blocking, we punt them to the rescuer workqueue to be submitted. This guarantees forward progress for bio allocations under generic_make_request() provided each bio is submitted before allocating the next, and provided the bios are freed after they complete. Note that this doesn't do anything for allocation from other mempools. Instead of allocating per bio data structures from a mempool, code should use bio_set's front_pad. Tested it by forcing the rescue codepath to be taken (by disabling the first GFP_NOWAIT) attempt, and then ran it with bcache (which does a lot of arbitrary bio splitting) and verified that the rescuer was being invoked. Signed-off-by: Kent Overstreet <koverstreet@google.com> CC: Jens Axboe <axboe@kernel.dk> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Muthukumar Ratty <muthur@gmail.com>
2012-09-10 21:33:46 +00:00
if (!p && gfp_mask != saved_gfp) {
punt_bios_to_rescuer(bs);
gfp_mask = saved_gfp;
p = mempool_alloc(bs->bio_pool, gfp_mask);
}
front_pad = bs->front_pad;
inline_vecs = BIO_INLINE_VECS;
}
if (unlikely(!p))
return NULL;
bio = p + front_pad;
bio_init(bio, NULL, 0);
if (nr_iovecs > inline_vecs) {
unsigned long idx = 0;
bvl = bvec_alloc(gfp_mask, nr_iovecs, &idx, bs->bvec_pool);
block: Avoid deadlocks with bio allocation by stacking drivers Previously, if we ever try to allocate more than once from the same bio set while running under generic_make_request() (i.e. a stacking block driver), we risk deadlock. This is because of the code in generic_make_request() that converts recursion to iteration; any bios we submit won't actually be submitted (so they can complete and eventually be freed) until after we return - this means if we allocate a second bio, we're blocking the first one from ever being freed. Thus if enough threads call into a stacking block driver at the same time with bios that need multiple splits, and the bio_set's reserve gets used up, we deadlock. This can be worked around in the driver code - we could check if we're running under generic_make_request(), then mask out __GFP_WAIT when we go to allocate a bio, and if the allocation fails punt to workqueue and retry the allocation. But this is tricky and not a generic solution. This patch solves it for all users by inverting the previously described technique. We allocate a rescuer workqueue for each bio_set, and then in the allocation code if there are bios on current->bio_list we would be blocking, we punt them to the rescuer workqueue to be submitted. This guarantees forward progress for bio allocations under generic_make_request() provided each bio is submitted before allocating the next, and provided the bios are freed after they complete. Note that this doesn't do anything for allocation from other mempools. Instead of allocating per bio data structures from a mempool, code should use bio_set's front_pad. Tested it by forcing the rescue codepath to be taken (by disabling the first GFP_NOWAIT) attempt, and then ran it with bcache (which does a lot of arbitrary bio splitting) and verified that the rescuer was being invoked. Signed-off-by: Kent Overstreet <koverstreet@google.com> CC: Jens Axboe <axboe@kernel.dk> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Muthukumar Ratty <muthur@gmail.com>
2012-09-10 21:33:46 +00:00
if (!bvl && gfp_mask != saved_gfp) {
punt_bios_to_rescuer(bs);
gfp_mask = saved_gfp;
bvl = bvec_alloc(gfp_mask, nr_iovecs, &idx, bs->bvec_pool);
block: Avoid deadlocks with bio allocation by stacking drivers Previously, if we ever try to allocate more than once from the same bio set while running under generic_make_request() (i.e. a stacking block driver), we risk deadlock. This is because of the code in generic_make_request() that converts recursion to iteration; any bios we submit won't actually be submitted (so they can complete and eventually be freed) until after we return - this means if we allocate a second bio, we're blocking the first one from ever being freed. Thus if enough threads call into a stacking block driver at the same time with bios that need multiple splits, and the bio_set's reserve gets used up, we deadlock. This can be worked around in the driver code - we could check if we're running under generic_make_request(), then mask out __GFP_WAIT when we go to allocate a bio, and if the allocation fails punt to workqueue and retry the allocation. But this is tricky and not a generic solution. This patch solves it for all users by inverting the previously described technique. We allocate a rescuer workqueue for each bio_set, and then in the allocation code if there are bios on current->bio_list we would be blocking, we punt them to the rescuer workqueue to be submitted. This guarantees forward progress for bio allocations under generic_make_request() provided each bio is submitted before allocating the next, and provided the bios are freed after they complete. Note that this doesn't do anything for allocation from other mempools. Instead of allocating per bio data structures from a mempool, code should use bio_set's front_pad. Tested it by forcing the rescue codepath to be taken (by disabling the first GFP_NOWAIT) attempt, and then ran it with bcache (which does a lot of arbitrary bio splitting) and verified that the rescuer was being invoked. Signed-off-by: Kent Overstreet <koverstreet@google.com> CC: Jens Axboe <axboe@kernel.dk> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Muthukumar Ratty <muthur@gmail.com>
2012-09-10 21:33:46 +00:00
}
if (unlikely(!bvl))
goto err_free;
bio->bi_flags |= idx << BVEC_POOL_OFFSET;
} else if (nr_iovecs) {
bvl = bio->bi_inline_vecs;
}
bio->bi_pool = bs;
bio->bi_max_vecs = nr_iovecs;
bio->bi_io_vec = bvl;
return bio;
err_free:
mempool_free(p, bs->bio_pool);
return NULL;
}
EXPORT_SYMBOL(bio_alloc_bioset);
void zero_fill_bio(struct bio *bio)
{
unsigned long flags;
block: Convert bio_for_each_segment() to bvec_iter More prep work for immutable biovecs - with immutable bvecs drivers won't be able to use the biovec directly, they'll need to use helpers that take into account bio->bi_iter.bi_bvec_done. This updates callers for the new usage without changing the implementation yet. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Paul Clements <Paul.Clements@steeleye.com> Cc: Jim Paris <jim@jtan.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com> Cc: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Cc: support@lsi.com Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Quoc-Son Anh <quoc-sonx.anh@intel.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Jan Kara <jack@suse.cz> Cc: linux-m68k@lists.linux-m68k.org Cc: linuxppc-dev@lists.ozlabs.org Cc: drbd-user@lists.linbit.com Cc: nbd-general@lists.sourceforge.net Cc: cbe-oss-dev@lists.ozlabs.org Cc: xen-devel@lists.xensource.com Cc: virtualization@lists.linux-foundation.org Cc: linux-raid@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: DL-MPTFusionLinux@lsi.com Cc: linux-scsi@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: linux-fsdevel@vger.kernel.org Cc: cluster-devel@redhat.com Cc: linux-mm@kvack.org Acked-by: Geoff Levand <geoff@infradead.org>
2013-11-24 01:19:00 +00:00
struct bio_vec bv;
struct bvec_iter iter;
block: Convert bio_for_each_segment() to bvec_iter More prep work for immutable biovecs - with immutable bvecs drivers won't be able to use the biovec directly, they'll need to use helpers that take into account bio->bi_iter.bi_bvec_done. This updates callers for the new usage without changing the implementation yet. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Paul Clements <Paul.Clements@steeleye.com> Cc: Jim Paris <jim@jtan.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com> Cc: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Cc: support@lsi.com Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Quoc-Son Anh <quoc-sonx.anh@intel.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Jan Kara <jack@suse.cz> Cc: linux-m68k@lists.linux-m68k.org Cc: linuxppc-dev@lists.ozlabs.org Cc: drbd-user@lists.linbit.com Cc: nbd-general@lists.sourceforge.net Cc: cbe-oss-dev@lists.ozlabs.org Cc: xen-devel@lists.xensource.com Cc: virtualization@lists.linux-foundation.org Cc: linux-raid@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: DL-MPTFusionLinux@lsi.com Cc: linux-scsi@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: linux-fsdevel@vger.kernel.org Cc: cluster-devel@redhat.com Cc: linux-mm@kvack.org Acked-by: Geoff Levand <geoff@infradead.org>
2013-11-24 01:19:00 +00:00
bio_for_each_segment(bv, bio, iter) {
char *data = bvec_kmap_irq(&bv, &flags);
memset(data, 0, bv.bv_len);
flush_dcache_page(bv.bv_page);
bvec_kunmap_irq(data, &flags);
}
}
EXPORT_SYMBOL(zero_fill_bio);
/**
* bio_put - release a reference to a bio
* @bio: bio to release reference to
*
* Description:
* Put a reference to a &struct bio, either one you have gotten with
* bio_alloc, bio_get or bio_clone. The last put of a bio will free it.
**/
void bio_put(struct bio *bio)
{
if (!bio_flagged(bio, BIO_REFFED))
bio_free(bio);
else {
BIO_BUG_ON(!atomic_read(&bio->__bi_cnt));
/*
* last put frees it
*/
if (atomic_dec_and_test(&bio->__bi_cnt))
bio_free(bio);
}
}
EXPORT_SYMBOL(bio_put);
inline int bio_phys_segments(struct request_queue *q, struct bio *bio)
{
if (unlikely(!bio_flagged(bio, BIO_SEG_VALID)))
blk_recount_segments(q, bio);
return bio->bi_phys_segments;
}
EXPORT_SYMBOL(bio_phys_segments);
/**
* __bio_clone_fast - clone a bio that shares the original bio's biovec
* @bio: destination bio
* @bio_src: bio to clone
*
* Clone a &bio. Caller will own the returned bio, but not
* the actual data it points to. Reference count of returned
* bio will be one.
*
* Caller must ensure that @bio_src is not freed before @bio.
*/
void __bio_clone_fast(struct bio *bio, struct bio *bio_src)
{
BUG_ON(bio->bi_pool && BVEC_POOL_IDX(bio));
/*
* most users will be overriding ->bi_bdev with a new target,
* so we don't set nor calculate new physical/hw segment counts here
*/
bio->bi_bdev = bio_src->bi_bdev;
bio_set_flag(bio, BIO_CLONED);
bio->bi_opf = bio_src->bi_opf;
bio->bi_iter = bio_src->bi_iter;
bio->bi_io_vec = bio_src->bi_io_vec;
bio_clone_blkcg_association(bio, bio_src);
}
EXPORT_SYMBOL(__bio_clone_fast);
/**
* bio_clone_fast - clone a bio that shares the original bio's biovec
* @bio: bio to clone
* @gfp_mask: allocation priority
* @bs: bio_set to allocate from
*
* Like __bio_clone_fast, only also allocates the returned bio
*/
struct bio *bio_clone_fast(struct bio *bio, gfp_t gfp_mask, struct bio_set *bs)
{
struct bio *b;
b = bio_alloc_bioset(gfp_mask, 0, bs);
if (!b)
return NULL;
__bio_clone_fast(b, bio);
if (bio_integrity(bio)) {
int ret;
ret = bio_integrity_clone(b, bio, gfp_mask);
if (ret < 0) {
bio_put(b);
return NULL;
}
}
return b;
}
EXPORT_SYMBOL(bio_clone_fast);
static struct bio *__bio_clone_bioset(struct bio *bio_src, gfp_t gfp_mask,
struct bio_set *bs, int offset,
int size)
{
struct bvec_iter iter;
struct bio_vec bv;
struct bio *bio;
struct bvec_iter iter_src = bio_src->bi_iter;
/* for supporting partial clone */
if (offset || size != bio_src->bi_iter.bi_size) {
bio_advance_iter(bio_src, &iter_src, offset);
iter_src.bi_size = size;
}
/*
* Pre immutable biovecs, __bio_clone() used to just do a memcpy from
* bio_src->bi_io_vec to bio->bi_io_vec.
*
* We can't do that anymore, because:
*
* - The point of cloning the biovec is to produce a bio with a biovec
* the caller can modify: bi_idx and bi_bvec_done should be 0.
*
* - The original bio could've had more than BIO_MAX_PAGES biovecs; if
* we tried to clone the whole thing bio_alloc_bioset() would fail.
* But the clone should succeed as long as the number of biovecs we
* actually need to allocate is fewer than BIO_MAX_PAGES.
*
* - Lastly, bi_vcnt should not be looked at or relied upon by code
* that does not own the bio - reason being drivers don't use it for
* iterating over the biovec anymore, so expecting it to be kept up
* to date (i.e. for clones that share the parent biovec) is just
* asking for trouble and would force extra work on
* __bio_clone_fast() anyways.
*/
bio = bio_alloc_bioset(gfp_mask, __bio_segments(bio_src,
&iter_src), bs);
if (!bio)
return NULL;
bio->bi_bdev = bio_src->bi_bdev;
bio->bi_opf = bio_src->bi_opf;
bio->bi_iter.bi_sector = bio_src->bi_iter.bi_sector;
bio->bi_iter.bi_size = bio_src->bi_iter.bi_size;
switch (bio_op(bio)) {
case REQ_OP_DISCARD:
case REQ_OP_SECURE_ERASE:
case REQ_OP_WRITE_ZEROES:
break;
case REQ_OP_WRITE_SAME:
bio->bi_io_vec[bio->bi_vcnt++] = bio_src->bi_io_vec[0];
break;
default:
__bio_for_each_segment(bv, bio_src, iter, iter_src)
bio->bi_io_vec[bio->bi_vcnt++] = bv;
break;
}
if (bio_integrity(bio_src)) {
int ret;
ret = bio_integrity_clone(bio, bio_src, gfp_mask);
if (ret < 0) {
bio_put(bio);
return NULL;
}
}
bio_clone_blkcg_association(bio, bio_src);
return bio;
}
/**
* bio_clone_bioset - clone a bio
* @bio_src: bio to clone
* @gfp_mask: allocation priority
* @bs: bio_set to allocate from
*
* Clone bio. Caller will own the returned bio, but not the actual data it
* points to. Reference count of returned bio will be one.
*/
struct bio *bio_clone_bioset(struct bio *bio_src, gfp_t gfp_mask,
struct bio_set *bs)
{
return __bio_clone_bioset(bio_src, gfp_mask, bs, 0,
bio_src->bi_iter.bi_size);
}
EXPORT_SYMBOL(bio_clone_bioset);
/**
* bio_clone_bioset_partial - clone a partial bio
* @bio_src: bio to clone
* @gfp_mask: allocation priority
* @bs: bio_set to allocate from
* @offset: cloned starting from the offset
* @size: size for the cloned bio
*
* Clone bio. Caller will own the returned bio, but not the actual data it
* points to. Reference count of returned bio will be one.
*/
struct bio *bio_clone_bioset_partial(struct bio *bio_src, gfp_t gfp_mask,
struct bio_set *bs, int offset,
int size)
{
return __bio_clone_bioset(bio_src, gfp_mask, bs, offset, size);
}
EXPORT_SYMBOL(bio_clone_bioset_partial);
/**
* bio_add_pc_page - attempt to add page to bio
* @q: the target queue
* @bio: destination bio
* @page: page to add
* @len: vec entry length
* @offset: vec entry offset
*
* Attempt to add a page to the bio_vec maplist. This can fail for a
* number of reasons, such as the bio being full or target block device
* limitations. The target block device must allow bio's up to PAGE_SIZE,
* so it is always possible to add a single page to an empty bio.
*
* This should only be used by REQ_PC bios.
*/
int bio_add_pc_page(struct request_queue *q, struct bio *bio, struct page
*page, unsigned int len, unsigned int offset)
{
int retried_segments = 0;
struct bio_vec *bvec;
/*
* cloned bio must not modify vec list
*/
if (unlikely(bio_flagged(bio, BIO_CLONED)))
return 0;
if (((bio->bi_iter.bi_size + len) >> 9) > queue_max_hw_sectors(q))
return 0;
/*
* For filesystems with a blocksize smaller than the pagesize
* we will often be called with the same page as last time and
* a consecutive offset. Optimize this special case.
*/
if (bio->bi_vcnt > 0) {
struct bio_vec *prev = &bio->bi_io_vec[bio->bi_vcnt - 1];
if (page == prev->bv_page &&
offset == prev->bv_offset + prev->bv_len) {
prev->bv_len += len;
bio->bi_iter.bi_size += len;
goto done;
}
/*
* If the queue doesn't support SG gaps and adding this
* offset would create a gap, disallow it.
*/
if (bvec_gap_to_prev(q, prev, offset))
return 0;
}
if (bio->bi_vcnt >= bio->bi_max_vecs)
return 0;
/*
* setup the new entry, we might clear it again later if we
* cannot add the page
*/
bvec = &bio->bi_io_vec[bio->bi_vcnt];
bvec->bv_page = page;
bvec->bv_len = len;
bvec->bv_offset = offset;
bio->bi_vcnt++;
bio->bi_phys_segments++;
bio->bi_iter.bi_size += len;
/*
* Perform a recount if the number of segments is greater
* than queue_max_segments(q).
*/
while (bio->bi_phys_segments > queue_max_segments(q)) {
if (retried_segments)
goto failed;
retried_segments = 1;
blk_recount_segments(q, bio);
}
/* If we may be able to merge these biovecs, force a recount */
if (bio->bi_vcnt > 1 && (BIOVEC_PHYS_MERGEABLE(bvec-1, bvec)))
bio_clear_flag(bio, BIO_SEG_VALID);
done:
return len;
failed:
bvec->bv_page = NULL;
bvec->bv_len = 0;
bvec->bv_offset = 0;
bio->bi_vcnt--;
bio->bi_iter.bi_size -= len;
blk_recount_segments(q, bio);
return 0;
}
EXPORT_SYMBOL(bio_add_pc_page);
/**
* bio_add_page - attempt to add page to bio
* @bio: destination bio
* @page: page to add
* @len: vec entry length
* @offset: vec entry offset
*
* Attempt to add a page to the bio_vec maplist. This will only fail
* if either bio->bi_vcnt == bio->bi_max_vecs or it's a cloned bio.
*/
int bio_add_page(struct bio *bio, struct page *page,
unsigned int len, unsigned int offset)
{
struct bio_vec *bv;
/*
* cloned bio must not modify vec list
*/
if (WARN_ON_ONCE(bio_flagged(bio, BIO_CLONED)))
return 0;
/*
* For filesystems with a blocksize smaller than the pagesize
* we will often be called with the same page as last time and
* a consecutive offset. Optimize this special case.
*/
if (bio->bi_vcnt > 0) {
bv = &bio->bi_io_vec[bio->bi_vcnt - 1];
if (page == bv->bv_page &&
offset == bv->bv_offset + bv->bv_len) {
bv->bv_len += len;
goto done;
}
}
if (bio->bi_vcnt >= bio->bi_max_vecs)
return 0;
bv = &bio->bi_io_vec[bio->bi_vcnt];
bv->bv_page = page;
bv->bv_len = len;
bv->bv_offset = offset;
bio->bi_vcnt++;
done:
bio->bi_iter.bi_size += len;
return len;
}
EXPORT_SYMBOL(bio_add_page);
/**
* bio_iov_iter_get_pages - pin user or kernel pages and add them to a bio
* @bio: bio to add pages to
* @iter: iov iterator describing the region to be mapped
*
* Pins as many pages from *iter and appends them to @bio's bvec array. The
* pages will have to be released using put_page() when done.
*/
int bio_iov_iter_get_pages(struct bio *bio, struct iov_iter *iter)
{
unsigned short nr_pages = bio->bi_max_vecs - bio->bi_vcnt;
struct bio_vec *bv = bio->bi_io_vec + bio->bi_vcnt;
struct page **pages = (struct page **)bv;
size_t offset, diff;
ssize_t size;
size = iov_iter_get_pages(iter, pages, LONG_MAX, nr_pages, &offset);
if (unlikely(size <= 0))
return size ? size : -EFAULT;
nr_pages = (size + offset + PAGE_SIZE - 1) / PAGE_SIZE;
/*
* Deep magic below: We need to walk the pinned pages backwards
* because we are abusing the space allocated for the bio_vecs
* for the page array. Because the bio_vecs are larger than the
* page pointers by definition this will always work. But it also
* means we can't use bio_add_page, so any changes to it's semantics
* need to be reflected here as well.
*/
bio->bi_iter.bi_size += size;
bio->bi_vcnt += nr_pages;
diff = (nr_pages * PAGE_SIZE - offset) - size;
while (nr_pages--) {
bv[nr_pages].bv_page = pages[nr_pages];
bv[nr_pages].bv_len = PAGE_SIZE;
bv[nr_pages].bv_offset = 0;
}
bv[0].bv_offset += offset;
bv[0].bv_len -= offset;
if (diff)
bv[bio->bi_vcnt - 1].bv_len -= diff;
iov_iter_advance(iter, size);
return 0;
}
EXPORT_SYMBOL_GPL(bio_iov_iter_get_pages);
struct submit_bio_ret {
struct completion event;
int error;
};
static void submit_bio_wait_endio(struct bio *bio)
{
struct submit_bio_ret *ret = bio->bi_private;
ret->error = bio->bi_error;
complete(&ret->event);
}
/**
* submit_bio_wait - submit a bio, and wait until it completes
* @bio: The &struct bio which describes the I/O
*
* Simple wrapper around submit_bio(). Returns 0 on success, or the error from
* bio_endio() on failure.
*/
int submit_bio_wait(struct bio *bio)
{
struct submit_bio_ret ret;
init_completion(&ret.event);
bio->bi_private = &ret;
bio->bi_end_io = submit_bio_wait_endio;
bio->bi_opf |= REQ_SYNC;
submit_bio(bio);
wait_for_completion_io(&ret.event);
return ret.error;
}
EXPORT_SYMBOL(submit_bio_wait);
/**
* bio_advance - increment/complete a bio by some number of bytes
* @bio: bio to advance
* @bytes: number of bytes to complete
*
* This updates bi_sector, bi_size and bi_idx; if the number of bytes to
* complete doesn't align with a bvec boundary, then bv_len and bv_offset will
* be updated on the last bvec as well.
*
* @bio will then represent the remaining, uncompleted portion of the io.
*/
void bio_advance(struct bio *bio, unsigned bytes)
{
if (bio_integrity(bio))
bio_integrity_advance(bio, bytes);
bio_advance_iter(bio, &bio->bi_iter, bytes);
}
EXPORT_SYMBOL(bio_advance);
/**
* bio_alloc_pages - allocates a single page for each bvec in a bio
* @bio: bio to allocate pages for
* @gfp_mask: flags for allocation
*
* Allocates pages up to @bio->bi_vcnt.
*
* Returns 0 on success, -ENOMEM on failure. On failure, any allocated pages are
* freed.
*/
int bio_alloc_pages(struct bio *bio, gfp_t gfp_mask)
{
int i;
struct bio_vec *bv;
bio_for_each_segment_all(bv, bio, i) {
bv->bv_page = alloc_page(gfp_mask);
if (!bv->bv_page) {
while (--bv >= bio->bi_io_vec)
__free_page(bv->bv_page);
return -ENOMEM;
}
}
return 0;
}
EXPORT_SYMBOL(bio_alloc_pages);
/**
* bio_copy_data - copy contents of data buffers from one chain of bios to
* another
* @src: source bio list
* @dst: destination bio list
*
* If @src and @dst are single bios, bi_next must be NULL - otherwise, treats
* @src and @dst as linked lists of bios.
*
* Stops when it reaches the end of either @src or @dst - that is, copies
* min(src->bi_size, dst->bi_size) bytes (or the equivalent for lists of bios).
*/
void bio_copy_data(struct bio *dst, struct bio *src)
{
struct bvec_iter src_iter, dst_iter;
struct bio_vec src_bv, dst_bv;
void *src_p, *dst_p;
unsigned bytes;
src_iter = src->bi_iter;
dst_iter = dst->bi_iter;
while (1) {
if (!src_iter.bi_size) {
src = src->bi_next;
if (!src)
break;
src_iter = src->bi_iter;
}
if (!dst_iter.bi_size) {
dst = dst->bi_next;
if (!dst)
break;
dst_iter = dst->bi_iter;
}
src_bv = bio_iter_iovec(src, src_iter);
dst_bv = bio_iter_iovec(dst, dst_iter);
bytes = min(src_bv.bv_len, dst_bv.bv_len);
src_p = kmap_atomic(src_bv.bv_page);
dst_p = kmap_atomic(dst_bv.bv_page);
memcpy(dst_p + dst_bv.bv_offset,
src_p + src_bv.bv_offset,
bytes);
kunmap_atomic(dst_p);
kunmap_atomic(src_p);
bio_advance_iter(src, &src_iter, bytes);
bio_advance_iter(dst, &dst_iter, bytes);
}
}
EXPORT_SYMBOL(bio_copy_data);
struct bio_map_data {
int is_our_pages;
struct iov_iter iter;
struct iovec iov[];
};
static struct bio_map_data *bio_alloc_map_data(unsigned int iov_count,
gfp_t gfp_mask)
{
if (iov_count > UIO_MAXIOV)
return NULL;
return kmalloc(sizeof(struct bio_map_data) +
sizeof(struct iovec) * iov_count, gfp_mask);
}
/**
* bio_copy_from_iter - copy all pages from iov_iter to bio
* @bio: The &struct bio which describes the I/O as destination
* @iter: iov_iter as source
*
* Copy all pages from iov_iter to bio.
* Returns 0 on success, or error on failure.
*/
static int bio_copy_from_iter(struct bio *bio, struct iov_iter iter)
{
int i;
struct bio_vec *bvec;
bio_for_each_segment_all(bvec, bio, i) {
ssize_t ret;
ret = copy_page_from_iter(bvec->bv_page,
bvec->bv_offset,
bvec->bv_len,
&iter);
if (!iov_iter_count(&iter))
break;
if (ret < bvec->bv_len)
return -EFAULT;
}
return 0;
}
/**
* bio_copy_to_iter - copy all pages from bio to iov_iter
* @bio: The &struct bio which describes the I/O as source
* @iter: iov_iter as destination
*
* Copy all pages from bio to iov_iter.
* Returns 0 on success, or error on failure.
*/
static int bio_copy_to_iter(struct bio *bio, struct iov_iter iter)
{
int i;
struct bio_vec *bvec;
bio_for_each_segment_all(bvec, bio, i) {
ssize_t ret;
ret = copy_page_to_iter(bvec->bv_page,
bvec->bv_offset,
bvec->bv_len,
&iter);
if (!iov_iter_count(&iter))
break;
if (ret < bvec->bv_len)
return -EFAULT;
}
return 0;
}
void bio_free_pages(struct bio *bio)
{
struct bio_vec *bvec;
int i;
bio_for_each_segment_all(bvec, bio, i)
__free_page(bvec->bv_page);
}
EXPORT_SYMBOL(bio_free_pages);
/**
* bio_uncopy_user - finish previously mapped bio
* @bio: bio being terminated
*
* Free pages allocated from bio_copy_user_iov() and write back data
* to user space in case of a read.
*/
int bio_uncopy_user(struct bio *bio)
{
struct bio_map_data *bmd = bio->bi_private;
int ret = 0;
[SCSI] sg: Fix user memory corruption when SG_IO is interrupted by a signal There is a nasty bug in the SCSI SG_IO ioctl that in some circumstances leads to one process writing data into the address space of some other random unrelated process if the ioctl is interrupted by a signal. What happens is the following: - A process issues an SG_IO ioctl with direction DXFER_FROM_DEV (ie the underlying SCSI command will transfer data from the SCSI device to the buffer provided in the ioctl) - Before the command finishes, a signal is sent to the process waiting in the ioctl. This will end up waking up the sg_ioctl() code: result = wait_event_interruptible(sfp->read_wait, (srp_done(sfp, srp) || sdp->detached)); but neither srp_done() nor sdp->detached is true, so we end up just setting srp->orphan and returning to userspace: srp->orphan = 1; write_unlock_irq(&sfp->rq_list_lock); return result; /* -ERESTARTSYS because signal hit process */ At this point the original process is done with the ioctl and blithely goes ahead handling the signal, reissuing the ioctl, etc. - Eventually, the SCSI command issued by the first ioctl finishes and ends up in sg_rq_end_io(). At the end of that function, we run through: write_lock_irqsave(&sfp->rq_list_lock, iflags); if (unlikely(srp->orphan)) { if (sfp->keep_orphan) srp->sg_io_owned = 0; else done = 0; } srp->done = done; write_unlock_irqrestore(&sfp->rq_list_lock, iflags); if (likely(done)) { /* Now wake up any sg_read() that is waiting for this * packet. */ wake_up_interruptible(&sfp->read_wait); kill_fasync(&sfp->async_qp, SIGPOLL, POLL_IN); kref_put(&sfp->f_ref, sg_remove_sfp); } else { INIT_WORK(&srp->ew.work, sg_rq_end_io_usercontext); schedule_work(&srp->ew.work); } Since srp->orphan *is* set, we set done to 0 (assuming the userspace app has not set keep_orphan via an SG_SET_KEEP_ORPHAN ioctl), and therefore we end up scheduling sg_rq_end_io_usercontext() to run in a workqueue. - In workqueue context we go through sg_rq_end_io_usercontext() -> sg_finish_rem_req() -> blk_rq_unmap_user() -> ... -> bio_uncopy_user() -> __bio_copy_iov() -> copy_to_user(). The key point here is that we are doing copy_to_user() on a workqueue -- that is, we're on a kernel thread with current->mm equal to whatever random previous user process was scheduled before this kernel thread. So we end up copying whatever data the SCSI command returned to the virtual address of the buffer passed into the original ioctl, but it's quite likely we do this copying into a different address space! As suggested by James Bottomley <James.Bottomley@hansenpartnership.com>, add a check for current->mm (which is NULL if we're on a kernel thread without a real userspace address space) in bio_uncopy_user(), and skip the copy if we're on a kernel thread. There's no reason that I can think of for any caller of bio_uncopy_user() to want to do copying on a kernel thread with a random active userspace address space. Huge thanks to Costa Sapuntzakis <costa@purestorage.com> for the original pointer to this bug in the sg code. Signed-off-by: Roland Dreier <roland@purestorage.com> Tested-by: David Milburn <dmilburn@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: <stable@vger.kernel.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-06 00:55:01 +00:00
if (!bio_flagged(bio, BIO_NULL_MAPPED)) {
/*
* if we're in a workqueue, the request is orphaned, so
* don't copy into a random user address space, just free
* and return -EINTR so user space doesn't expect any data.
[SCSI] sg: Fix user memory corruption when SG_IO is interrupted by a signal There is a nasty bug in the SCSI SG_IO ioctl that in some circumstances leads to one process writing data into the address space of some other random unrelated process if the ioctl is interrupted by a signal. What happens is the following: - A process issues an SG_IO ioctl with direction DXFER_FROM_DEV (ie the underlying SCSI command will transfer data from the SCSI device to the buffer provided in the ioctl) - Before the command finishes, a signal is sent to the process waiting in the ioctl. This will end up waking up the sg_ioctl() code: result = wait_event_interruptible(sfp->read_wait, (srp_done(sfp, srp) || sdp->detached)); but neither srp_done() nor sdp->detached is true, so we end up just setting srp->orphan and returning to userspace: srp->orphan = 1; write_unlock_irq(&sfp->rq_list_lock); return result; /* -ERESTARTSYS because signal hit process */ At this point the original process is done with the ioctl and blithely goes ahead handling the signal, reissuing the ioctl, etc. - Eventually, the SCSI command issued by the first ioctl finishes and ends up in sg_rq_end_io(). At the end of that function, we run through: write_lock_irqsave(&sfp->rq_list_lock, iflags); if (unlikely(srp->orphan)) { if (sfp->keep_orphan) srp->sg_io_owned = 0; else done = 0; } srp->done = done; write_unlock_irqrestore(&sfp->rq_list_lock, iflags); if (likely(done)) { /* Now wake up any sg_read() that is waiting for this * packet. */ wake_up_interruptible(&sfp->read_wait); kill_fasync(&sfp->async_qp, SIGPOLL, POLL_IN); kref_put(&sfp->f_ref, sg_remove_sfp); } else { INIT_WORK(&srp->ew.work, sg_rq_end_io_usercontext); schedule_work(&srp->ew.work); } Since srp->orphan *is* set, we set done to 0 (assuming the userspace app has not set keep_orphan via an SG_SET_KEEP_ORPHAN ioctl), and therefore we end up scheduling sg_rq_end_io_usercontext() to run in a workqueue. - In workqueue context we go through sg_rq_end_io_usercontext() -> sg_finish_rem_req() -> blk_rq_unmap_user() -> ... -> bio_uncopy_user() -> __bio_copy_iov() -> copy_to_user(). The key point here is that we are doing copy_to_user() on a workqueue -- that is, we're on a kernel thread with current->mm equal to whatever random previous user process was scheduled before this kernel thread. So we end up copying whatever data the SCSI command returned to the virtual address of the buffer passed into the original ioctl, but it's quite likely we do this copying into a different address space! As suggested by James Bottomley <James.Bottomley@hansenpartnership.com>, add a check for current->mm (which is NULL if we're on a kernel thread without a real userspace address space) in bio_uncopy_user(), and skip the copy if we're on a kernel thread. There's no reason that I can think of for any caller of bio_uncopy_user() to want to do copying on a kernel thread with a random active userspace address space. Huge thanks to Costa Sapuntzakis <costa@purestorage.com> for the original pointer to this bug in the sg code. Signed-off-by: Roland Dreier <roland@purestorage.com> Tested-by: David Milburn <dmilburn@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: <stable@vger.kernel.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-06 00:55:01 +00:00
*/
if (!current->mm)
ret = -EINTR;
else if (bio_data_dir(bio) == READ)
ret = bio_copy_to_iter(bio, bmd->iter);
if (bmd->is_our_pages)
bio_free_pages(bio);
[SCSI] sg: Fix user memory corruption when SG_IO is interrupted by a signal There is a nasty bug in the SCSI SG_IO ioctl that in some circumstances leads to one process writing data into the address space of some other random unrelated process if the ioctl is interrupted by a signal. What happens is the following: - A process issues an SG_IO ioctl with direction DXFER_FROM_DEV (ie the underlying SCSI command will transfer data from the SCSI device to the buffer provided in the ioctl) - Before the command finishes, a signal is sent to the process waiting in the ioctl. This will end up waking up the sg_ioctl() code: result = wait_event_interruptible(sfp->read_wait, (srp_done(sfp, srp) || sdp->detached)); but neither srp_done() nor sdp->detached is true, so we end up just setting srp->orphan and returning to userspace: srp->orphan = 1; write_unlock_irq(&sfp->rq_list_lock); return result; /* -ERESTARTSYS because signal hit process */ At this point the original process is done with the ioctl and blithely goes ahead handling the signal, reissuing the ioctl, etc. - Eventually, the SCSI command issued by the first ioctl finishes and ends up in sg_rq_end_io(). At the end of that function, we run through: write_lock_irqsave(&sfp->rq_list_lock, iflags); if (unlikely(srp->orphan)) { if (sfp->keep_orphan) srp->sg_io_owned = 0; else done = 0; } srp->done = done; write_unlock_irqrestore(&sfp->rq_list_lock, iflags); if (likely(done)) { /* Now wake up any sg_read() that is waiting for this * packet. */ wake_up_interruptible(&sfp->read_wait); kill_fasync(&sfp->async_qp, SIGPOLL, POLL_IN); kref_put(&sfp->f_ref, sg_remove_sfp); } else { INIT_WORK(&srp->ew.work, sg_rq_end_io_usercontext); schedule_work(&srp->ew.work); } Since srp->orphan *is* set, we set done to 0 (assuming the userspace app has not set keep_orphan via an SG_SET_KEEP_ORPHAN ioctl), and therefore we end up scheduling sg_rq_end_io_usercontext() to run in a workqueue. - In workqueue context we go through sg_rq_end_io_usercontext() -> sg_finish_rem_req() -> blk_rq_unmap_user() -> ... -> bio_uncopy_user() -> __bio_copy_iov() -> copy_to_user(). The key point here is that we are doing copy_to_user() on a workqueue -- that is, we're on a kernel thread with current->mm equal to whatever random previous user process was scheduled before this kernel thread. So we end up copying whatever data the SCSI command returned to the virtual address of the buffer passed into the original ioctl, but it's quite likely we do this copying into a different address space! As suggested by James Bottomley <James.Bottomley@hansenpartnership.com>, add a check for current->mm (which is NULL if we're on a kernel thread without a real userspace address space) in bio_uncopy_user(), and skip the copy if we're on a kernel thread. There's no reason that I can think of for any caller of bio_uncopy_user() to want to do copying on a kernel thread with a random active userspace address space. Huge thanks to Costa Sapuntzakis <costa@purestorage.com> for the original pointer to this bug in the sg code. Signed-off-by: Roland Dreier <roland@purestorage.com> Tested-by: David Milburn <dmilburn@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: <stable@vger.kernel.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-06 00:55:01 +00:00
}
kfree(bmd);
bio_put(bio);
return ret;
}
/**
* bio_copy_user_iov - copy user data to bio
* @q: destination block queue
* @map_data: pointer to the rq_map_data holding pages (if necessary)
* @iter: iovec iterator
* @gfp_mask: memory allocation flags
*
* Prepares and returns a bio for indirect user io, bouncing data
* to/from kernel pages as necessary. Must be paired with
* call bio_uncopy_user() on io completion.
*/
struct bio *bio_copy_user_iov(struct request_queue *q,
struct rq_map_data *map_data,
const struct iov_iter *iter,
gfp_t gfp_mask)
{
struct bio_map_data *bmd;
struct page *page;
struct bio *bio;
int i, ret;
int nr_pages = 0;
unsigned int len = iter->count;
unsigned int offset = map_data ? offset_in_page(map_data->offset) : 0;
for (i = 0; i < iter->nr_segs; i++) {
unsigned long uaddr;
unsigned long end;
unsigned long start;
uaddr = (unsigned long) iter->iov[i].iov_base;
end = (uaddr + iter->iov[i].iov_len + PAGE_SIZE - 1)
>> PAGE_SHIFT;
start = uaddr >> PAGE_SHIFT;
/*
* Overflow, abort
*/
if (end < start)
return ERR_PTR(-EINVAL);
nr_pages += end - start;
}
if (offset)
nr_pages++;
bmd = bio_alloc_map_data(iter->nr_segs, gfp_mask);
if (!bmd)
return ERR_PTR(-ENOMEM);
/*
* We need to do a deep copy of the iov_iter including the iovecs.
* The caller provided iov might point to an on-stack or otherwise
* shortlived one.
*/
bmd->is_our_pages = map_data ? 0 : 1;
memcpy(bmd->iov, iter->iov, sizeof(struct iovec) * iter->nr_segs);
iov_iter_init(&bmd->iter, iter->type, bmd->iov,
iter->nr_segs, iter->count);
ret = -ENOMEM;
bio = bio_kmalloc(gfp_mask, nr_pages);
if (!bio)
goto out_bmd;
ret = 0;
if (map_data) {
nr_pages = 1 << map_data->page_order;
i = map_data->offset / PAGE_SIZE;
}
while (len) {
unsigned int bytes = PAGE_SIZE;
bytes -= offset;
if (bytes > len)
bytes = len;
if (map_data) {
if (i == map_data->nr_entries * nr_pages) {
ret = -ENOMEM;
break;
}
page = map_data->pages[i / nr_pages];
page += (i % nr_pages);
i++;
} else {
page = alloc_page(q->bounce_gfp | gfp_mask);
if (!page) {
ret = -ENOMEM;
break;
}
}
if (bio_add_pc_page(q, bio, page, bytes, offset) < bytes)
break;
len -= bytes;
offset = 0;
}
if (ret)
goto cleanup;
/*
* success
*/
if (((iter->type & WRITE) && (!map_data || !map_data->null_mapped)) ||
block: fix sg SG_DXFER_TO_FROM_DEV regression I overlooked SG_DXFER_TO_FROM_DEV support when I converted sg to use the block layer mapping API (2.6.28). Douglas Gilbert explained SG_DXFER_TO_FROM_DEV: http://www.spinics.net/lists/linux-scsi/msg37135.html = The semantics of SG_DXFER_TO_FROM_DEV were: - copy user space buffer to kernel (LLD) buffer - do SCSI command which is assumed to be of the DATA_IN (data from device) variety. This would overwrite some or all of the kernel buffer - copy kernel (LLD) buffer back to the user space. The idea was to detect short reads by filling the original user space buffer with some marker bytes ("0xec" it would seem in this report). The "resid" value is a better way of detecting short reads but that was only added this century and requires co-operation from the LLD. = This patch changes the block layer mapping API to support this semantics. This simply adds another field to struct rq_map_data and enables __bio_copy_iov() to copy data from user space even with READ requests. It's better to add the flags field and kills null_mapped and the new from_user fields in struct rq_map_data but that approach makes it difficult to send this patch to stable trees because st and osst drivers use struct rq_map_data (they were converted to use the block layer in 2.6.29 and 2.6.30). Well, I should clean up the block layer mapping API. zhou sf reported this regiression and tested this patch: http://www.spinics.net/lists/linux-scsi/msg37128.html http://www.spinics.net/lists/linux-scsi/msg37168.html Reported-by: zhou sf <sxzzsf@gmail.com> Tested-by: zhou sf <sxzzsf@gmail.com> Cc: stable@kernel.org Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-07-09 12:46:53 +00:00
(map_data && map_data->from_user)) {
ret = bio_copy_from_iter(bio, *iter);
if (ret)
goto cleanup;
}
bio->bi_private = bmd;
return bio;
cleanup:
if (!map_data)
bio_free_pages(bio);
bio_put(bio);
out_bmd:
kfree(bmd);
return ERR_PTR(ret);
}
/**
* bio_map_user_iov - map user iovec into bio
* @q: the struct request_queue for the bio
* @iter: iovec iterator
* @gfp_mask: memory allocation flags
*
* Map the user space address into a bio suitable for io to a block
* device. Returns an error pointer in case of error.
*/
struct bio *bio_map_user_iov(struct request_queue *q,
const struct iov_iter *iter,
gfp_t gfp_mask)
{
int j;
int nr_pages = 0;
struct page **pages;
struct bio *bio;
int cur_page = 0;
int ret, offset;
struct iov_iter i;
struct iovec iov;
iov_for_each(iov, i, *iter) {
unsigned long uaddr = (unsigned long) iov.iov_base;
unsigned long len = iov.iov_len;
unsigned long end = (uaddr + len + PAGE_SIZE - 1) >> PAGE_SHIFT;
unsigned long start = uaddr >> PAGE_SHIFT;
/*
* Overflow, abort
*/
if (end < start)
return ERR_PTR(-EINVAL);
nr_pages += end - start;
/*
* buffer must be aligned to at least logical block size for now
*/
if (uaddr & queue_dma_alignment(q))
return ERR_PTR(-EINVAL);
}
if (!nr_pages)
return ERR_PTR(-EINVAL);
bio = bio_kmalloc(gfp_mask, nr_pages);
if (!bio)
return ERR_PTR(-ENOMEM);
ret = -ENOMEM;
pages = kcalloc(nr_pages, sizeof(struct page *), gfp_mask);
if (!pages)
goto out;
iov_for_each(iov, i, *iter) {
unsigned long uaddr = (unsigned long) iov.iov_base;
unsigned long len = iov.iov_len;
unsigned long end = (uaddr + len + PAGE_SIZE - 1) >> PAGE_SHIFT;
unsigned long start = uaddr >> PAGE_SHIFT;
const int local_nr_pages = end - start;
const int page_limit = cur_page + local_nr_pages;
ret = get_user_pages_fast(uaddr, local_nr_pages,
(iter->type & WRITE) != WRITE,
&pages[cur_page]);
if (ret < local_nr_pages) {
ret = -EFAULT;
goto out_unmap;
}
offset = offset_in_page(uaddr);
for (j = cur_page; j < page_limit; j++) {
unsigned int bytes = PAGE_SIZE - offset;
if (len <= 0)
break;
if (bytes > len)
bytes = len;
/*
* sorry...
*/
if (bio_add_pc_page(q, bio, pages[j], bytes, offset) <
bytes)
break;
len -= bytes;
offset = 0;
}
cur_page = j;
/*
* release the pages we didn't map into the bio, if any
*/
while (j < page_limit)
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
put_page(pages[j++]);
}
kfree(pages);
bio_set_flag(bio, BIO_USER_MAPPED);
/*
* subtle -- if bio_map_user_iov() ended up bouncing a bio,
* it would normally disappear when its bi_end_io is run.
* however, we need it for the unmap, so grab an extra
* reference to it
*/
bio_get(bio);
return bio;
out_unmap:
for (j = 0; j < nr_pages; j++) {
if (!pages[j])
break;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
put_page(pages[j]);
}
out:
kfree(pages);
bio_put(bio);
return ERR_PTR(ret);
}
static void __bio_unmap_user(struct bio *bio)
{
struct bio_vec *bvec;
int i;
/*
* make sure we dirty pages we wrote to
*/
bio_for_each_segment_all(bvec, bio, i) {
if (bio_data_dir(bio) == READ)
set_page_dirty_lock(bvec->bv_page);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
put_page(bvec->bv_page);
}
bio_put(bio);
}
/**
* bio_unmap_user - unmap a bio
* @bio: the bio being unmapped
*
* Unmap a bio previously mapped by bio_map_user_iov(). Must be called from
* process context.
*
* bio_unmap_user() may sleep.
*/
void bio_unmap_user(struct bio *bio)
{
__bio_unmap_user(bio);
bio_put(bio);
}
static void bio_map_kern_endio(struct bio *bio)
{
bio_put(bio);
}
/**
* bio_map_kern - map kernel address into bio
* @q: the struct request_queue for the bio
* @data: pointer to buffer to map
* @len: length in bytes
* @gfp_mask: allocation flags for bio allocation
*
* Map the kernel address into a bio suitable for io to a block
* device. Returns an error pointer in case of error.
*/
struct bio *bio_map_kern(struct request_queue *q, void *data, unsigned int len,
gfp_t gfp_mask)
{
unsigned long kaddr = (unsigned long)data;
unsigned long end = (kaddr + len + PAGE_SIZE - 1) >> PAGE_SHIFT;
unsigned long start = kaddr >> PAGE_SHIFT;
const int nr_pages = end - start;
int offset, i;
struct bio *bio;
bio = bio_kmalloc(gfp_mask, nr_pages);
if (!bio)
return ERR_PTR(-ENOMEM);
offset = offset_in_page(kaddr);
for (i = 0; i < nr_pages; i++) {
unsigned int bytes = PAGE_SIZE - offset;
if (len <= 0)
break;
if (bytes > len)
bytes = len;
if (bio_add_pc_page(q, bio, virt_to_page(data), bytes,
offset) < bytes) {
/* we don't support partial mappings */
bio_put(bio);
return ERR_PTR(-EINVAL);
}
data += bytes;
len -= bytes;
offset = 0;
}
bio->bi_end_io = bio_map_kern_endio;
return bio;
}
EXPORT_SYMBOL(bio_map_kern);
static void bio_copy_kern_endio(struct bio *bio)
{
bio_free_pages(bio);
bio_put(bio);
}
static void bio_copy_kern_endio_read(struct bio *bio)
{
char *p = bio->bi_private;
struct bio_vec *bvec;
int i;
bio_for_each_segment_all(bvec, bio, i) {
memcpy(p, page_address(bvec->bv_page), bvec->bv_len);
p += bvec->bv_len;
}
bio_copy_kern_endio(bio);
}
/**
* bio_copy_kern - copy kernel address into bio
* @q: the struct request_queue for the bio
* @data: pointer to buffer to copy
* @len: length in bytes
* @gfp_mask: allocation flags for bio and page allocation
* @reading: data direction is READ
*
* copy the kernel address into a bio suitable for io to a block
* device. Returns an error pointer in case of error.
*/
struct bio *bio_copy_kern(struct request_queue *q, void *data, unsigned int len,
gfp_t gfp_mask, int reading)
{
unsigned long kaddr = (unsigned long)data;
unsigned long end = (kaddr + len + PAGE_SIZE - 1) >> PAGE_SHIFT;
unsigned long start = kaddr >> PAGE_SHIFT;
struct bio *bio;
void *p = data;
int nr_pages = 0;
/*
* Overflow, abort
*/
if (end < start)
return ERR_PTR(-EINVAL);
nr_pages = end - start;
bio = bio_kmalloc(gfp_mask, nr_pages);
if (!bio)
return ERR_PTR(-ENOMEM);
while (len) {
struct page *page;
unsigned int bytes = PAGE_SIZE;
if (bytes > len)
bytes = len;
page = alloc_page(q->bounce_gfp | gfp_mask);
if (!page)
goto cleanup;
if (!reading)
memcpy(page_address(page), p, bytes);
if (bio_add_pc_page(q, bio, page, bytes, 0) < bytes)
break;
len -= bytes;
p += bytes;
}
if (reading) {
bio->bi_end_io = bio_copy_kern_endio_read;
bio->bi_private = data;
} else {
bio->bi_end_io = bio_copy_kern_endio;
}
return bio;
cleanup:
bio_free_pages(bio);
bio_put(bio);
return ERR_PTR(-ENOMEM);
}
/*
* bio_set_pages_dirty() and bio_check_pages_dirty() are support functions
* for performing direct-IO in BIOs.
*
* The problem is that we cannot run set_page_dirty() from interrupt context
* because the required locks are not interrupt-safe. So what we can do is to
* mark the pages dirty _before_ performing IO. And in interrupt context,
* check that the pages are still dirty. If so, fine. If not, redirty them
* in process context.
*
* We special-case compound pages here: normally this means reads into hugetlb
* pages. The logic in here doesn't really work right for compound pages
* because the VM does not uniformly chase down the head page in all cases.
* But dirtiness of compound pages is pretty meaningless anyway: the VM doesn't
* handle them at all. So we skip compound pages here at an early stage.
*
* Note that this code is very hard to test under normal circumstances because
* direct-io pins the pages with get_user_pages(). This makes
* is_page_cache_freeable return false, and the VM will not clean the pages.
* But other code (eg, flusher threads) could clean the pages if they are mapped
* pagecache.
*
* Simply disabling the call to bio_set_pages_dirty() is a good way to test the
* deferred bio dirtying paths.
*/
/*
* bio_set_pages_dirty() will mark all the bio's pages as dirty.
*/
void bio_set_pages_dirty(struct bio *bio)
{
struct bio_vec *bvec;
int i;
bio_for_each_segment_all(bvec, bio, i) {
struct page *page = bvec->bv_page;
if (page && !PageCompound(page))
set_page_dirty_lock(page);
}
}
static void bio_release_pages(struct bio *bio)
{
struct bio_vec *bvec;
int i;
bio_for_each_segment_all(bvec, bio, i) {
struct page *page = bvec->bv_page;
if (page)
put_page(page);
}
}
/*
* bio_check_pages_dirty() will check that all the BIO's pages are still dirty.
* If they are, then fine. If, however, some pages are clean then they must
* have been written out during the direct-IO read. So we take another ref on
* the BIO and the offending pages and re-dirty the pages in process context.
*
* It is expected that bio_check_pages_dirty() will wholly own the BIO from
* here on. It will run one put_page() against each page and will run one
* bio_put() against the BIO.
*/
2006-11-22 14:55:48 +00:00
static void bio_dirty_fn(struct work_struct *work);
2006-11-22 14:55:48 +00:00
static DECLARE_WORK(bio_dirty_work, bio_dirty_fn);
static DEFINE_SPINLOCK(bio_dirty_lock);
static struct bio *bio_dirty_list;
/*
* This runs in process context
*/
2006-11-22 14:55:48 +00:00
static void bio_dirty_fn(struct work_struct *work)
{
unsigned long flags;
struct bio *bio;
spin_lock_irqsave(&bio_dirty_lock, flags);
bio = bio_dirty_list;
bio_dirty_list = NULL;
spin_unlock_irqrestore(&bio_dirty_lock, flags);
while (bio) {
struct bio *next = bio->bi_private;
bio_set_pages_dirty(bio);
bio_release_pages(bio);
bio_put(bio);
bio = next;
}
}
void bio_check_pages_dirty(struct bio *bio)
{
struct bio_vec *bvec;
int nr_clean_pages = 0;
int i;
bio_for_each_segment_all(bvec, bio, i) {
struct page *page = bvec->bv_page;
if (PageDirty(page) || PageCompound(page)) {
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
put_page(page);
bvec->bv_page = NULL;
} else {
nr_clean_pages++;
}
}
if (nr_clean_pages) {
unsigned long flags;
spin_lock_irqsave(&bio_dirty_lock, flags);
bio->bi_private = bio_dirty_list;
bio_dirty_list = bio;
spin_unlock_irqrestore(&bio_dirty_lock, flags);
schedule_work(&bio_dirty_work);
} else {
bio_put(bio);
}
}
void generic_start_io_acct(int rw, unsigned long sectors,
struct hd_struct *part)
{
int cpu = part_stat_lock();
part_round_stats(cpu, part);
part_stat_inc(cpu, part, ios[rw]);
part_stat_add(cpu, part, sectors[rw], sectors);
part_inc_in_flight(part, rw);
part_stat_unlock();
}
EXPORT_SYMBOL(generic_start_io_acct);
void generic_end_io_acct(int rw, struct hd_struct *part,
unsigned long start_time)
{
unsigned long duration = jiffies - start_time;
int cpu = part_stat_lock();
part_stat_add(cpu, part, ticks[rw], duration);
part_round_stats(cpu, part);
part_dec_in_flight(part, rw);
part_stat_unlock();
}
EXPORT_SYMBOL(generic_end_io_acct);
#if ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE
void bio_flush_dcache_pages(struct bio *bi)
{
block: Convert bio_for_each_segment() to bvec_iter More prep work for immutable biovecs - with immutable bvecs drivers won't be able to use the biovec directly, they'll need to use helpers that take into account bio->bi_iter.bi_bvec_done. This updates callers for the new usage without changing the implementation yet. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Paul Clements <Paul.Clements@steeleye.com> Cc: Jim Paris <jim@jtan.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com> Cc: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Cc: support@lsi.com Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Quoc-Son Anh <quoc-sonx.anh@intel.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Jan Kara <jack@suse.cz> Cc: linux-m68k@lists.linux-m68k.org Cc: linuxppc-dev@lists.ozlabs.org Cc: drbd-user@lists.linbit.com Cc: nbd-general@lists.sourceforge.net Cc: cbe-oss-dev@lists.ozlabs.org Cc: xen-devel@lists.xensource.com Cc: virtualization@lists.linux-foundation.org Cc: linux-raid@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: DL-MPTFusionLinux@lsi.com Cc: linux-scsi@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: linux-fsdevel@vger.kernel.org Cc: cluster-devel@redhat.com Cc: linux-mm@kvack.org Acked-by: Geoff Levand <geoff@infradead.org>
2013-11-24 01:19:00 +00:00
struct bio_vec bvec;
struct bvec_iter iter;
block: Convert bio_for_each_segment() to bvec_iter More prep work for immutable biovecs - with immutable bvecs drivers won't be able to use the biovec directly, they'll need to use helpers that take into account bio->bi_iter.bi_bvec_done. This updates callers for the new usage without changing the implementation yet. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Paul Clements <Paul.Clements@steeleye.com> Cc: Jim Paris <jim@jtan.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com> Cc: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Cc: support@lsi.com Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Quoc-Son Anh <quoc-sonx.anh@intel.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Jan Kara <jack@suse.cz> Cc: linux-m68k@lists.linux-m68k.org Cc: linuxppc-dev@lists.ozlabs.org Cc: drbd-user@lists.linbit.com Cc: nbd-general@lists.sourceforge.net Cc: cbe-oss-dev@lists.ozlabs.org Cc: xen-devel@lists.xensource.com Cc: virtualization@lists.linux-foundation.org Cc: linux-raid@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: DL-MPTFusionLinux@lsi.com Cc: linux-scsi@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: linux-fsdevel@vger.kernel.org Cc: cluster-devel@redhat.com Cc: linux-mm@kvack.org Acked-by: Geoff Levand <geoff@infradead.org>
2013-11-24 01:19:00 +00:00
bio_for_each_segment(bvec, bi, iter)
flush_dcache_page(bvec.bv_page);
}
EXPORT_SYMBOL(bio_flush_dcache_pages);
#endif
static inline bool bio_remaining_done(struct bio *bio)
{
/*
* If we're not chaining, then ->__bi_remaining is always 1 and
* we always end io on the first invocation.
*/
if (!bio_flagged(bio, BIO_CHAIN))
return true;
BUG_ON(atomic_read(&bio->__bi_remaining) <= 0);
block: remove management of bi_remaining when restoring original bi_end_io Commit c4cf5261 ("bio: skip atomic inc/dec of ->bi_remaining for non-chains") regressed all existing callers that followed this pattern: 1) saving a bio's original bi_end_io 2) wiring up an intermediate bi_end_io 3) restoring the original bi_end_io from intermediate bi_end_io 4) calling bio_endio() to execute the restored original bi_end_io The regression was due to BIO_CHAIN only ever getting set if bio_inc_remaining() is called. For the above pattern it isn't set until step 3 above (step 2 would've needed to establish BIO_CHAIN). As such the first bio_endio(), in step 2 above, never decremented __bi_remaining before calling the intermediate bi_end_io -- leaving __bi_remaining with the value 1 instead of 0. When bio_inc_remaining() occurred during step 3 it brought it to a value of 2. When the second bio_endio() was called, in step 4 above, it should've called the original bi_end_io but it didn't because there was an extra reference that wasn't dropped (due to atomic operations being optimized away since BIO_CHAIN wasn't set upfront). Fix this issue by removing the __bi_remaining management complexity for all callers that use the above pattern -- bio_chain() is the only interface that _needs_ to be concerned with __bi_remaining. For the above pattern callers just expect the bi_end_io they set to get called! Remove bio_endio_nodec() and also remove all bio_inc_remaining() calls that aren't associated with the bio_chain() interface. Also, the bio_inc_remaining() interface has been moved local to bio.c. Fixes: c4cf5261 ("bio: skip atomic inc/dec of ->bi_remaining for non-chains") Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-22 13:14:03 +00:00
if (atomic_dec_and_test(&bio->__bi_remaining)) {
bio_clear_flag(bio, BIO_CHAIN);
return true;
block: remove management of bi_remaining when restoring original bi_end_io Commit c4cf5261 ("bio: skip atomic inc/dec of ->bi_remaining for non-chains") regressed all existing callers that followed this pattern: 1) saving a bio's original bi_end_io 2) wiring up an intermediate bi_end_io 3) restoring the original bi_end_io from intermediate bi_end_io 4) calling bio_endio() to execute the restored original bi_end_io The regression was due to BIO_CHAIN only ever getting set if bio_inc_remaining() is called. For the above pattern it isn't set until step 3 above (step 2 would've needed to establish BIO_CHAIN). As such the first bio_endio(), in step 2 above, never decremented __bi_remaining before calling the intermediate bi_end_io -- leaving __bi_remaining with the value 1 instead of 0. When bio_inc_remaining() occurred during step 3 it brought it to a value of 2. When the second bio_endio() was called, in step 4 above, it should've called the original bi_end_io but it didn't because there was an extra reference that wasn't dropped (due to atomic operations being optimized away since BIO_CHAIN wasn't set upfront). Fix this issue by removing the __bi_remaining management complexity for all callers that use the above pattern -- bio_chain() is the only interface that _needs_ to be concerned with __bi_remaining. For the above pattern callers just expect the bi_end_io they set to get called! Remove bio_endio_nodec() and also remove all bio_inc_remaining() calls that aren't associated with the bio_chain() interface. Also, the bio_inc_remaining() interface has been moved local to bio.c. Fixes: c4cf5261 ("bio: skip atomic inc/dec of ->bi_remaining for non-chains") Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-22 13:14:03 +00:00
}
return false;
}
/**
* bio_endio - end I/O on a bio
* @bio: bio
*
* Description:
* bio_endio() will end I/O on the whole bio. bio_endio() is the preferred
* way to end I/O on a bio. No one should call bi_end_io() directly on a
* bio unless they own it and thus know that it has an end_io function.
**/
void bio_endio(struct bio *bio)
{
again:
if (!bio_remaining_done(bio))
return;
/*
* Need to have a real endio function for chained bios, otherwise
* various corner cases will break (like stacking block devices that
* save/restore bi_end_io) - however, we want to avoid unbounded
* recursion and blowing the stack. Tail call optimization would
* handle this, but compiling with frame pointers also disables
* gcc's sibling call optimization.
*/
if (bio->bi_end_io == bio_chain_endio) {
bio = __bio_chain_endio(bio);
goto again;
}
if (bio->bi_end_io)
bio->bi_end_io(bio);
}
EXPORT_SYMBOL(bio_endio);
/**
* bio_split - split a bio
* @bio: bio to split
* @sectors: number of sectors to split from the front of @bio
* @gfp: gfp mask
* @bs: bio set to allocate from
*
* Allocates and returns a new bio which represents @sectors from the start of
* @bio, and updates @bio to represent the remaining sectors.
*
* Unless this is a discard request the newly allocated bio will point
* to @bio's bi_io_vec; it is the caller's responsibility to ensure that
* @bio is not freed before the split.
*/
struct bio *bio_split(struct bio *bio, int sectors,
gfp_t gfp, struct bio_set *bs)
{
struct bio *split = NULL;
BUG_ON(sectors <= 0);
BUG_ON(sectors >= bio_sectors(bio));
split = bio_clone_fast(bio, gfp, bs);
if (!split)
return NULL;
split->bi_iter.bi_size = sectors << 9;
if (bio_integrity(split))
bio_integrity_trim(split, 0, sectors);
bio_advance(bio, split->bi_iter.bi_size);
return split;
}
EXPORT_SYMBOL(bio_split);
/**
* bio_trim - trim a bio
* @bio: bio to trim
* @offset: number of sectors to trim from the front of @bio
* @size: size we want to trim @bio to, in sectors
*/
void bio_trim(struct bio *bio, int offset, int size)
{
/* 'bio' is a cloned bio which we need to trim to match
* the given offset and size.
*/
size <<= 9;
block: Abstract out bvec iterator Immutable biovecs are going to require an explicit iterator. To implement immutable bvecs, a later patch is going to add a bi_bvec_done member to this struct; for now, this patch effectively just renames things. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Benny Halevy <bhalevy@tonian.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@fusionio.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: xfs@oss.sgi.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: "Roger Pau Monné" <roger.pau@citrix.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchand@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Peng Tao <tao.peng@emc.com> Cc: Andy Adamson <andros@netapp.com> Cc: fanchaoting <fanchaoting@cn.fujitsu.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Pankaj Kumar <pankaj.km@samsung.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Mel Gorman <mgorman@suse.de>6
2013-10-11 22:44:27 +00:00
if (offset == 0 && size == bio->bi_iter.bi_size)
return;
bio_clear_flag(bio, BIO_SEG_VALID);
bio_advance(bio, offset << 9);
block: Abstract out bvec iterator Immutable biovecs are going to require an explicit iterator. To implement immutable bvecs, a later patch is going to add a bi_bvec_done member to this struct; for now, this patch effectively just renames things. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Benny Halevy <bhalevy@tonian.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@fusionio.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: xfs@oss.sgi.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: "Roger Pau Monné" <roger.pau@citrix.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchand@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Peng Tao <tao.peng@emc.com> Cc: Andy Adamson <andros@netapp.com> Cc: fanchaoting <fanchaoting@cn.fujitsu.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Pankaj Kumar <pankaj.km@samsung.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Mel Gorman <mgorman@suse.de>6
2013-10-11 22:44:27 +00:00
bio->bi_iter.bi_size = size;
}
EXPORT_SYMBOL_GPL(bio_trim);
/*
* create memory pools for biovec's in a bio_set.
* use the global biovec slabs created for general use.
*/
mempool_t *biovec_create_pool(int pool_entries)
{
struct biovec_slab *bp = bvec_slabs + BVEC_POOL_MAX;
return mempool_create_slab_pool(pool_entries, bp->slab);
}
void bioset_free(struct bio_set *bs)
{
block: Avoid deadlocks with bio allocation by stacking drivers Previously, if we ever try to allocate more than once from the same bio set while running under generic_make_request() (i.e. a stacking block driver), we risk deadlock. This is because of the code in generic_make_request() that converts recursion to iteration; any bios we submit won't actually be submitted (so they can complete and eventually be freed) until after we return - this means if we allocate a second bio, we're blocking the first one from ever being freed. Thus if enough threads call into a stacking block driver at the same time with bios that need multiple splits, and the bio_set's reserve gets used up, we deadlock. This can be worked around in the driver code - we could check if we're running under generic_make_request(), then mask out __GFP_WAIT when we go to allocate a bio, and if the allocation fails punt to workqueue and retry the allocation. But this is tricky and not a generic solution. This patch solves it for all users by inverting the previously described technique. We allocate a rescuer workqueue for each bio_set, and then in the allocation code if there are bios on current->bio_list we would be blocking, we punt them to the rescuer workqueue to be submitted. This guarantees forward progress for bio allocations under generic_make_request() provided each bio is submitted before allocating the next, and provided the bios are freed after they complete. Note that this doesn't do anything for allocation from other mempools. Instead of allocating per bio data structures from a mempool, code should use bio_set's front_pad. Tested it by forcing the rescue codepath to be taken (by disabling the first GFP_NOWAIT) attempt, and then ran it with bcache (which does a lot of arbitrary bio splitting) and verified that the rescuer was being invoked. Signed-off-by: Kent Overstreet <koverstreet@google.com> CC: Jens Axboe <axboe@kernel.dk> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Muthukumar Ratty <muthur@gmail.com>
2012-09-10 21:33:46 +00:00
if (bs->rescue_workqueue)
destroy_workqueue(bs->rescue_workqueue);
if (bs->bio_pool)
mempool_destroy(bs->bio_pool);
if (bs->bvec_pool)
mempool_destroy(bs->bvec_pool);
bioset_integrity_free(bs);
bio_put_slab(bs);
kfree(bs);
}
EXPORT_SYMBOL(bioset_free);
static struct bio_set *__bioset_create(unsigned int pool_size,
unsigned int front_pad,
bool create_bvec_pool)
{
unsigned int back_pad = BIO_INLINE_VECS * sizeof(struct bio_vec);
struct bio_set *bs;
bs = kzalloc(sizeof(*bs), GFP_KERNEL);
if (!bs)
return NULL;
bs->front_pad = front_pad;
block: Avoid deadlocks with bio allocation by stacking drivers Previously, if we ever try to allocate more than once from the same bio set while running under generic_make_request() (i.e. a stacking block driver), we risk deadlock. This is because of the code in generic_make_request() that converts recursion to iteration; any bios we submit won't actually be submitted (so they can complete and eventually be freed) until after we return - this means if we allocate a second bio, we're blocking the first one from ever being freed. Thus if enough threads call into a stacking block driver at the same time with bios that need multiple splits, and the bio_set's reserve gets used up, we deadlock. This can be worked around in the driver code - we could check if we're running under generic_make_request(), then mask out __GFP_WAIT when we go to allocate a bio, and if the allocation fails punt to workqueue and retry the allocation. But this is tricky and not a generic solution. This patch solves it for all users by inverting the previously described technique. We allocate a rescuer workqueue for each bio_set, and then in the allocation code if there are bios on current->bio_list we would be blocking, we punt them to the rescuer workqueue to be submitted. This guarantees forward progress for bio allocations under generic_make_request() provided each bio is submitted before allocating the next, and provided the bios are freed after they complete. Note that this doesn't do anything for allocation from other mempools. Instead of allocating per bio data structures from a mempool, code should use bio_set's front_pad. Tested it by forcing the rescue codepath to be taken (by disabling the first GFP_NOWAIT) attempt, and then ran it with bcache (which does a lot of arbitrary bio splitting) and verified that the rescuer was being invoked. Signed-off-by: Kent Overstreet <koverstreet@google.com> CC: Jens Axboe <axboe@kernel.dk> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Muthukumar Ratty <muthur@gmail.com>
2012-09-10 21:33:46 +00:00
spin_lock_init(&bs->rescue_lock);
bio_list_init(&bs->rescue_list);
INIT_WORK(&bs->rescue_work, bio_alloc_rescue);
bs->bio_slab = bio_find_or_create_slab(front_pad + back_pad);
if (!bs->bio_slab) {
kfree(bs);
return NULL;
}
bs->bio_pool = mempool_create_slab_pool(pool_size, bs->bio_slab);
if (!bs->bio_pool)
goto bad;
if (create_bvec_pool) {
bs->bvec_pool = biovec_create_pool(pool_size);
if (!bs->bvec_pool)
goto bad;
}
block: Avoid deadlocks with bio allocation by stacking drivers Previously, if we ever try to allocate more than once from the same bio set while running under generic_make_request() (i.e. a stacking block driver), we risk deadlock. This is because of the code in generic_make_request() that converts recursion to iteration; any bios we submit won't actually be submitted (so they can complete and eventually be freed) until after we return - this means if we allocate a second bio, we're blocking the first one from ever being freed. Thus if enough threads call into a stacking block driver at the same time with bios that need multiple splits, and the bio_set's reserve gets used up, we deadlock. This can be worked around in the driver code - we could check if we're running under generic_make_request(), then mask out __GFP_WAIT when we go to allocate a bio, and if the allocation fails punt to workqueue and retry the allocation. But this is tricky and not a generic solution. This patch solves it for all users by inverting the previously described technique. We allocate a rescuer workqueue for each bio_set, and then in the allocation code if there are bios on current->bio_list we would be blocking, we punt them to the rescuer workqueue to be submitted. This guarantees forward progress for bio allocations under generic_make_request() provided each bio is submitted before allocating the next, and provided the bios are freed after they complete. Note that this doesn't do anything for allocation from other mempools. Instead of allocating per bio data structures from a mempool, code should use bio_set's front_pad. Tested it by forcing the rescue codepath to be taken (by disabling the first GFP_NOWAIT) attempt, and then ran it with bcache (which does a lot of arbitrary bio splitting) and verified that the rescuer was being invoked. Signed-off-by: Kent Overstreet <koverstreet@google.com> CC: Jens Axboe <axboe@kernel.dk> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Muthukumar Ratty <muthur@gmail.com>
2012-09-10 21:33:46 +00:00
bs->rescue_workqueue = alloc_workqueue("bioset", WQ_MEM_RECLAIM, 0);
if (!bs->rescue_workqueue)
goto bad;
block: Avoid deadlocks with bio allocation by stacking drivers Previously, if we ever try to allocate more than once from the same bio set while running under generic_make_request() (i.e. a stacking block driver), we risk deadlock. This is because of the code in generic_make_request() that converts recursion to iteration; any bios we submit won't actually be submitted (so they can complete and eventually be freed) until after we return - this means if we allocate a second bio, we're blocking the first one from ever being freed. Thus if enough threads call into a stacking block driver at the same time with bios that need multiple splits, and the bio_set's reserve gets used up, we deadlock. This can be worked around in the driver code - we could check if we're running under generic_make_request(), then mask out __GFP_WAIT when we go to allocate a bio, and if the allocation fails punt to workqueue and retry the allocation. But this is tricky and not a generic solution. This patch solves it for all users by inverting the previously described technique. We allocate a rescuer workqueue for each bio_set, and then in the allocation code if there are bios on current->bio_list we would be blocking, we punt them to the rescuer workqueue to be submitted. This guarantees forward progress for bio allocations under generic_make_request() provided each bio is submitted before allocating the next, and provided the bios are freed after they complete. Note that this doesn't do anything for allocation from other mempools. Instead of allocating per bio data structures from a mempool, code should use bio_set's front_pad. Tested it by forcing the rescue codepath to be taken (by disabling the first GFP_NOWAIT) attempt, and then ran it with bcache (which does a lot of arbitrary bio splitting) and verified that the rescuer was being invoked. Signed-off-by: Kent Overstreet <koverstreet@google.com> CC: Jens Axboe <axboe@kernel.dk> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Muthukumar Ratty <muthur@gmail.com>
2012-09-10 21:33:46 +00:00
return bs;
bad:
bioset_free(bs);
return NULL;
}
/**
* bioset_create - Create a bio_set
* @pool_size: Number of bio and bio_vecs to cache in the mempool
* @front_pad: Number of bytes to allocate in front of the returned bio
*
* Description:
* Set up a bio_set to be used with @bio_alloc_bioset. Allows the caller
* to ask for a number of bytes to be allocated in front of the bio.
* Front pad allocation is useful for embedding the bio inside
* another structure, to avoid allocating extra data to go with the bio.
* Note that the bio must be embedded at the END of that structure always,
* or things will break badly.
*/
struct bio_set *bioset_create(unsigned int pool_size, unsigned int front_pad)
{
return __bioset_create(pool_size, front_pad, true);
}
EXPORT_SYMBOL(bioset_create);
/**
* bioset_create_nobvec - Create a bio_set without bio_vec mempool
* @pool_size: Number of bio to cache in the mempool
* @front_pad: Number of bytes to allocate in front of the returned bio
*
* Description:
* Same functionality as bioset_create() except that mempool is not
* created for bio_vecs. Saving some memory for bio_clone_fast() users.
*/
struct bio_set *bioset_create_nobvec(unsigned int pool_size, unsigned int front_pad)
{
return __bioset_create(pool_size, front_pad, false);
}
EXPORT_SYMBOL(bioset_create_nobvec);
block: implement bio_associate_current() IO scheduling and cgroup are tied to the issuing task via io_context and cgroup of %current. Unfortunately, there are cases where IOs need to be routed via a different task which makes scheduling and cgroup limit enforcement applied completely incorrectly. For example, all bios delayed by blk-throttle end up being issued by a delayed work item and get assigned the io_context of the worker task which happens to serve the work item and dumped to the default block cgroup. This is double confusing as bios which aren't delayed end up in the correct cgroup and makes using blk-throttle and cfq propio together impossible. Any code which punts IO issuing to another task is affected which is getting more and more common (e.g. btrfs). As both io_context and cgroup are firmly tied to task including userland visible APIs to manipulate them, it makes a lot of sense to match up tasks to bios. This patch implements bio_associate_current() which associates the specified bio with %current. The bio will record the associated ioc and blkcg at that point and block layer will use the recorded ones regardless of which task actually ends up issuing the bio. bio release puts the associated ioc and blkcg. It grabs and remembers ioc and blkcg instead of the task itself because task may already be dead by the time the bio is issued making ioc and blkcg inaccessible and those are all block layer cares about. elevator_set_req_fn() is updated such that the bio elvdata is being allocated for is available to the elevator. This doesn't update block cgroup policies yet. Further patches will implement the support. -v2: #ifdef CONFIG_BLK_CGROUP added around bio->bi_ioc dereference in rq_ioc() to fix build breakage. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Kent Overstreet <koverstreet@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-05 21:15:27 +00:00
#ifdef CONFIG_BLK_CGROUP
/**
* bio_associate_blkcg - associate a bio with the specified blkcg
* @bio: target bio
* @blkcg_css: css of the blkcg to associate
*
* Associate @bio with the blkcg specified by @blkcg_css. Block layer will
* treat @bio as if it were issued by a task which belongs to the blkcg.
*
* This function takes an extra reference of @blkcg_css which will be put
* when @bio is released. The caller must own @bio and is responsible for
* synchronizing calls to this function.
*/
int bio_associate_blkcg(struct bio *bio, struct cgroup_subsys_state *blkcg_css)
{
if (unlikely(bio->bi_css))
return -EBUSY;
css_get(blkcg_css);
bio->bi_css = blkcg_css;
return 0;
}
EXPORT_SYMBOL_GPL(bio_associate_blkcg);
block: implement bio_associate_current() IO scheduling and cgroup are tied to the issuing task via io_context and cgroup of %current. Unfortunately, there are cases where IOs need to be routed via a different task which makes scheduling and cgroup limit enforcement applied completely incorrectly. For example, all bios delayed by blk-throttle end up being issued by a delayed work item and get assigned the io_context of the worker task which happens to serve the work item and dumped to the default block cgroup. This is double confusing as bios which aren't delayed end up in the correct cgroup and makes using blk-throttle and cfq propio together impossible. Any code which punts IO issuing to another task is affected which is getting more and more common (e.g. btrfs). As both io_context and cgroup are firmly tied to task including userland visible APIs to manipulate them, it makes a lot of sense to match up tasks to bios. This patch implements bio_associate_current() which associates the specified bio with %current. The bio will record the associated ioc and blkcg at that point and block layer will use the recorded ones regardless of which task actually ends up issuing the bio. bio release puts the associated ioc and blkcg. It grabs and remembers ioc and blkcg instead of the task itself because task may already be dead by the time the bio is issued making ioc and blkcg inaccessible and those are all block layer cares about. elevator_set_req_fn() is updated such that the bio elvdata is being allocated for is available to the elevator. This doesn't update block cgroup policies yet. Further patches will implement the support. -v2: #ifdef CONFIG_BLK_CGROUP added around bio->bi_ioc dereference in rq_ioc() to fix build breakage. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Kent Overstreet <koverstreet@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-05 21:15:27 +00:00
/**
* bio_associate_current - associate a bio with %current
* @bio: target bio
*
* Associate @bio with %current if it hasn't been associated yet. Block
* layer will treat @bio as if it were issued by %current no matter which
* task actually issues it.
*
* This function takes an extra reference of @task's io_context and blkcg
* which will be put when @bio is released. The caller must own @bio,
* ensure %current->io_context exists, and is responsible for synchronizing
* calls to this function.
*/
int bio_associate_current(struct bio *bio)
{
struct io_context *ioc;
if (bio->bi_css)
block: implement bio_associate_current() IO scheduling and cgroup are tied to the issuing task via io_context and cgroup of %current. Unfortunately, there are cases where IOs need to be routed via a different task which makes scheduling and cgroup limit enforcement applied completely incorrectly. For example, all bios delayed by blk-throttle end up being issued by a delayed work item and get assigned the io_context of the worker task which happens to serve the work item and dumped to the default block cgroup. This is double confusing as bios which aren't delayed end up in the correct cgroup and makes using blk-throttle and cfq propio together impossible. Any code which punts IO issuing to another task is affected which is getting more and more common (e.g. btrfs). As both io_context and cgroup are firmly tied to task including userland visible APIs to manipulate them, it makes a lot of sense to match up tasks to bios. This patch implements bio_associate_current() which associates the specified bio with %current. The bio will record the associated ioc and blkcg at that point and block layer will use the recorded ones regardless of which task actually ends up issuing the bio. bio release puts the associated ioc and blkcg. It grabs and remembers ioc and blkcg instead of the task itself because task may already be dead by the time the bio is issued making ioc and blkcg inaccessible and those are all block layer cares about. elevator_set_req_fn() is updated such that the bio elvdata is being allocated for is available to the elevator. This doesn't update block cgroup policies yet. Further patches will implement the support. -v2: #ifdef CONFIG_BLK_CGROUP added around bio->bi_ioc dereference in rq_ioc() to fix build breakage. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Kent Overstreet <koverstreet@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-05 21:15:27 +00:00
return -EBUSY;
ioc = current->io_context;
if (!ioc)
return -ENOENT;
get_io_context_active(ioc);
bio->bi_ioc = ioc;
blkcg: rename subsystem name from blkio to io blkio interface has become messy over time and is currently the largest. In addition to the inconsistent naming scheme, it has multiple stat files which report more or less the same thing, a number of debug stat files which expose internal details which shouldn't have been part of the public interface in the first place, recursive and non-recursive stats and leaf and non-leaf knobs. Both recursive vs. non-recursive and leaf vs. non-leaf distinctions don't make any sense on the unified hierarchy as only leaf cgroups can contain processes. cgroups is going through a major interface revision with the unified hierarchy involving significant fundamental usage changes and given that a significant portion of the interface doesn't make sense anymore, it's a good time to reorganize the interface. As the first step, this patch renames the external visible subsystem name from "blkio" to "io". This is more concise, matches the other two major subsystem names, "cpu" and "memory", and better suited as blkcg will be involved in anything writeback related too whether an actual block device is involved or not. As the subsystem legacy_name is set to "blkio", the only userland visible change outside the unified hierarchy is that blkcg is reported as "io" instead of "blkio" in the subsystem initialized message during boot. On the unified hierarchy, blkcg now appears as "io". Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: cgroups@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-18 21:55:29 +00:00
bio->bi_css = task_get_css(current, io_cgrp_id);
block: implement bio_associate_current() IO scheduling and cgroup are tied to the issuing task via io_context and cgroup of %current. Unfortunately, there are cases where IOs need to be routed via a different task which makes scheduling and cgroup limit enforcement applied completely incorrectly. For example, all bios delayed by blk-throttle end up being issued by a delayed work item and get assigned the io_context of the worker task which happens to serve the work item and dumped to the default block cgroup. This is double confusing as bios which aren't delayed end up in the correct cgroup and makes using blk-throttle and cfq propio together impossible. Any code which punts IO issuing to another task is affected which is getting more and more common (e.g. btrfs). As both io_context and cgroup are firmly tied to task including userland visible APIs to manipulate them, it makes a lot of sense to match up tasks to bios. This patch implements bio_associate_current() which associates the specified bio with %current. The bio will record the associated ioc and blkcg at that point and block layer will use the recorded ones regardless of which task actually ends up issuing the bio. bio release puts the associated ioc and blkcg. It grabs and remembers ioc and blkcg instead of the task itself because task may already be dead by the time the bio is issued making ioc and blkcg inaccessible and those are all block layer cares about. elevator_set_req_fn() is updated such that the bio elvdata is being allocated for is available to the elevator. This doesn't update block cgroup policies yet. Further patches will implement the support. -v2: #ifdef CONFIG_BLK_CGROUP added around bio->bi_ioc dereference in rq_ioc() to fix build breakage. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Kent Overstreet <koverstreet@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-05 21:15:27 +00:00
return 0;
}
EXPORT_SYMBOL_GPL(bio_associate_current);
block: implement bio_associate_current() IO scheduling and cgroup are tied to the issuing task via io_context and cgroup of %current. Unfortunately, there are cases where IOs need to be routed via a different task which makes scheduling and cgroup limit enforcement applied completely incorrectly. For example, all bios delayed by blk-throttle end up being issued by a delayed work item and get assigned the io_context of the worker task which happens to serve the work item and dumped to the default block cgroup. This is double confusing as bios which aren't delayed end up in the correct cgroup and makes using blk-throttle and cfq propio together impossible. Any code which punts IO issuing to another task is affected which is getting more and more common (e.g. btrfs). As both io_context and cgroup are firmly tied to task including userland visible APIs to manipulate them, it makes a lot of sense to match up tasks to bios. This patch implements bio_associate_current() which associates the specified bio with %current. The bio will record the associated ioc and blkcg at that point and block layer will use the recorded ones regardless of which task actually ends up issuing the bio. bio release puts the associated ioc and blkcg. It grabs and remembers ioc and blkcg instead of the task itself because task may already be dead by the time the bio is issued making ioc and blkcg inaccessible and those are all block layer cares about. elevator_set_req_fn() is updated such that the bio elvdata is being allocated for is available to the elevator. This doesn't update block cgroup policies yet. Further patches will implement the support. -v2: #ifdef CONFIG_BLK_CGROUP added around bio->bi_ioc dereference in rq_ioc() to fix build breakage. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Kent Overstreet <koverstreet@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-05 21:15:27 +00:00
/**
* bio_disassociate_task - undo bio_associate_current()
* @bio: target bio
*/
void bio_disassociate_task(struct bio *bio)
{
if (bio->bi_ioc) {
put_io_context(bio->bi_ioc);
bio->bi_ioc = NULL;
}
if (bio->bi_css) {
css_put(bio->bi_css);
bio->bi_css = NULL;
}
}
/**
* bio_clone_blkcg_association - clone blkcg association from src to dst bio
* @dst: destination bio
* @src: source bio
*/
void bio_clone_blkcg_association(struct bio *dst, struct bio *src)
{
if (src->bi_css)
WARN_ON(bio_associate_blkcg(dst, src->bi_css));
}
block: implement bio_associate_current() IO scheduling and cgroup are tied to the issuing task via io_context and cgroup of %current. Unfortunately, there are cases where IOs need to be routed via a different task which makes scheduling and cgroup limit enforcement applied completely incorrectly. For example, all bios delayed by blk-throttle end up being issued by a delayed work item and get assigned the io_context of the worker task which happens to serve the work item and dumped to the default block cgroup. This is double confusing as bios which aren't delayed end up in the correct cgroup and makes using blk-throttle and cfq propio together impossible. Any code which punts IO issuing to another task is affected which is getting more and more common (e.g. btrfs). As both io_context and cgroup are firmly tied to task including userland visible APIs to manipulate them, it makes a lot of sense to match up tasks to bios. This patch implements bio_associate_current() which associates the specified bio with %current. The bio will record the associated ioc and blkcg at that point and block layer will use the recorded ones regardless of which task actually ends up issuing the bio. bio release puts the associated ioc and blkcg. It grabs and remembers ioc and blkcg instead of the task itself because task may already be dead by the time the bio is issued making ioc and blkcg inaccessible and those are all block layer cares about. elevator_set_req_fn() is updated such that the bio elvdata is being allocated for is available to the elevator. This doesn't update block cgroup policies yet. Further patches will implement the support. -v2: #ifdef CONFIG_BLK_CGROUP added around bio->bi_ioc dereference in rq_ioc() to fix build breakage. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Kent Overstreet <koverstreet@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-05 21:15:27 +00:00
#endif /* CONFIG_BLK_CGROUP */
static void __init biovec_init_slabs(void)
{
int i;
for (i = 0; i < BVEC_POOL_NR; i++) {
int size;
struct biovec_slab *bvs = bvec_slabs + i;
if (bvs->nr_vecs <= BIO_INLINE_VECS) {
bvs->slab = NULL;
continue;
}
size = bvs->nr_vecs * sizeof(struct bio_vec);
bvs->slab = kmem_cache_create(bvs->name, size, 0,
SLAB_HWCACHE_ALIGN|SLAB_PANIC, NULL);
}
}
static int __init init_bio(void)
{
bio_slab_max = 2;
bio_slab_nr = 0;
bio_slabs = kzalloc(bio_slab_max * sizeof(struct bio_slab), GFP_KERNEL);
if (!bio_slabs)
panic("bio: can't allocate bios\n");
bio_integrity_init();
biovec_init_slabs();
fs_bio_set = bioset_create(BIO_POOL_SIZE, 0);
if (!fs_bio_set)
panic("bio: can't allocate bios\n");
if (bioset_integrity_create(fs_bio_set, BIO_POOL_SIZE))
panic("bio: can't create integrity pool\n");
return 0;
}
subsys_initcall(init_bio);