linux-stable/include/linux/ksm.h

150 lines
3.8 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
/* SPDX-License-Identifier: GPL-2.0 */
ksm: the mm interface to ksm This patch presents the mm interface to a dummy version of ksm.c, for better scrutiny of that interface: the real ksm.c follows later. When CONFIG_KSM is not set, madvise(2) reject MADV_MERGEABLE and MADV_UNMERGEABLE with EINVAL, since that seems more helpful than pretending that they can be serviced. But when CONFIG_KSM=y, accept them even if KSM is not currently running, and even on areas which KSM will not touch (e.g. hugetlb or shared file or special driver mappings). Like other madvices, report ENOMEM despite success if any area in the range is unmapped, and use EAGAIN to report out of memory. Define vma flag VM_MERGEABLE to identify an area on which KSM may try merging pages: leave it to ksm_madvise() to decide whether to set it. Define mm flag MMF_VM_MERGEABLE to identify an mm which might contain VM_MERGEABLE areas, to minimize callouts when forking or exiting. Based upon earlier patches by Chris Wright and Izik Eidus. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Chris Wright <chrisw@redhat.com> Signed-off-by: Izik Eidus <ieidus@redhat.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Avi Kivity <avi@redhat.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 00:01:57 +00:00
#ifndef __LINUX_KSM_H
#define __LINUX_KSM_H
/*
* Memory merging support.
*
* This code enables dynamic sharing of identical pages found in different
* memory areas, even if they are not shared by fork().
*/
#include <linux/bitops.h>
#include <linux/mm.h>
ksm: let shared pages be swappable Initial implementation for swapping out KSM's shared pages: add page_referenced_ksm() and try_to_unmap_ksm(), which rmap.c calls when faced with a PageKsm page. Most of what's needed can be got from the rmap_items listed from the stable_node of the ksm page, without discovering the actual vma: so in this patch just fake up a struct vma for page_referenced_one() or try_to_unmap_one(), then refine that in the next patch. Add VM_NONLINEAR to ksm_madvise()'s list of exclusions: it has always been implicit there (being only set with VM_SHARED, already excluded), but let's make it explicit, to help justify the lack of nonlinear unmap. Rely on the page lock to protect against concurrent modifications to that page's node of the stable tree. The awkward part is not swapout but swapin: do_swap_page() and page_add_anon_rmap() now have to allow for new possibilities - perhaps a ksm page still in swapcache, perhaps a swapcache page associated with one location in one anon_vma now needed for another location or anon_vma. (And the vma might even be no longer VM_MERGEABLE when that happens.) ksm_might_need_to_copy() checks for that case, and supplies a duplicate page when necessary, simply leaving it to a subsequent pass of ksmd to rediscover the identity and merge them back into one ksm page. Disappointingly primitive: but the alternative would have to accumulate unswappable info about the swapped out ksm pages, limiting swappability. Remove page_add_ksm_rmap(): page_add_anon_rmap() now has to allow for the particular case it was handling, so just use it instead. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Izik Eidus <ieidus@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Chris Wright <chrisw@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:59:24 +00:00
#include <linux/pagemap.h>
#include <linux/rmap.h>
ksm: the mm interface to ksm This patch presents the mm interface to a dummy version of ksm.c, for better scrutiny of that interface: the real ksm.c follows later. When CONFIG_KSM is not set, madvise(2) reject MADV_MERGEABLE and MADV_UNMERGEABLE with EINVAL, since that seems more helpful than pretending that they can be serviced. But when CONFIG_KSM=y, accept them even if KSM is not currently running, and even on areas which KSM will not touch (e.g. hugetlb or shared file or special driver mappings). Like other madvices, report ENOMEM despite success if any area in the range is unmapped, and use EAGAIN to report out of memory. Define vma flag VM_MERGEABLE to identify an area on which KSM may try merging pages: leave it to ksm_madvise() to decide whether to set it. Define mm flag MMF_VM_MERGEABLE to identify an mm which might contain VM_MERGEABLE areas, to minimize callouts when forking or exiting. Based upon earlier patches by Chris Wright and Izik Eidus. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Chris Wright <chrisw@redhat.com> Signed-off-by: Izik Eidus <ieidus@redhat.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Avi Kivity <avi@redhat.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 00:01:57 +00:00
#include <linux/sched.h>
#include <linux/sched/coredump.h>
ksm: the mm interface to ksm This patch presents the mm interface to a dummy version of ksm.c, for better scrutiny of that interface: the real ksm.c follows later. When CONFIG_KSM is not set, madvise(2) reject MADV_MERGEABLE and MADV_UNMERGEABLE with EINVAL, since that seems more helpful than pretending that they can be serviced. But when CONFIG_KSM=y, accept them even if KSM is not currently running, and even on areas which KSM will not touch (e.g. hugetlb or shared file or special driver mappings). Like other madvices, report ENOMEM despite success if any area in the range is unmapped, and use EAGAIN to report out of memory. Define vma flag VM_MERGEABLE to identify an area on which KSM may try merging pages: leave it to ksm_madvise() to decide whether to set it. Define mm flag MMF_VM_MERGEABLE to identify an mm which might contain VM_MERGEABLE areas, to minimize callouts when forking or exiting. Based upon earlier patches by Chris Wright and Izik Eidus. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Chris Wright <chrisw@redhat.com> Signed-off-by: Izik Eidus <ieidus@redhat.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Avi Kivity <avi@redhat.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 00:01:57 +00:00
#ifdef CONFIG_KSM
int ksm_madvise(struct vm_area_struct *vma, unsigned long start,
unsigned long end, int advice, unsigned long *vm_flags);
mm: add new api to enable ksm per process Patch series "mm: process/cgroup ksm support", v9. So far KSM can only be enabled by calling madvise for memory regions. To be able to use KSM for more workloads, KSM needs to have the ability to be enabled / disabled at the process / cgroup level. Use case 1: The madvise call is not available in the programming language. An example for this are programs with forked workloads using a garbage collected language without pointers. In such a language madvise cannot be made available. In addition the addresses of objects get moved around as they are garbage collected. KSM sharing needs to be enabled "from the outside" for these type of workloads. Use case 2: The same interpreter can also be used for workloads where KSM brings no benefit or even has overhead. We'd like to be able to enable KSM on a workload by workload basis. Use case 3: With the madvise call sharing opportunities are only enabled for the current process: it is a workload-local decision. A considerable number of sharing opportunities may exist across multiple workloads or jobs (if they are part of the same security domain). Only a higler level entity like a job scheduler or container can know for certain if its running one or more instances of a job. That job scheduler however doesn't have the necessary internal workload knowledge to make targeted madvise calls. Security concerns: In previous discussions security concerns have been brought up. The problem is that an individual workload does not have the knowledge about what else is running on a machine. Therefore it has to be very conservative in what memory areas can be shared or not. However, if the system is dedicated to running multiple jobs within the same security domain, its the job scheduler that has the knowledge that sharing can be safely enabled and is even desirable. Performance: Experiments with using UKSM have shown a capacity increase of around 20%. Here are the metrics from an instagram workload (taken from a machine with 64GB main memory): full_scans: 445 general_profit: 20158298048 max_page_sharing: 256 merge_across_nodes: 1 pages_shared: 129547 pages_sharing: 5119146 pages_to_scan: 4000 pages_unshared: 1760924 pages_volatile: 10761341 run: 1 sleep_millisecs: 20 stable_node_chains: 167 stable_node_chains_prune_millisecs: 2000 stable_node_dups: 2751 use_zero_pages: 0 zero_pages_sharing: 0 After the service is running for 30 minutes to an hour, 4 to 5 million shared pages are common for this workload when using KSM. Detailed changes: 1. New options for prctl system command This patch series adds two new options to the prctl system call. The first one allows to enable KSM at the process level and the second one to query the setting. The setting will be inherited by child processes. With the above setting, KSM can be enabled for the seed process of a cgroup and all processes in the cgroup will inherit the setting. 2. Changes to KSM processing When KSM is enabled at the process level, the KSM code will iterate over all the VMA's and enable KSM for the eligible VMA's. When forking a process that has KSM enabled, the setting will be inherited by the new child process. 3. Add general_profit metric The general_profit metric of KSM is specified in the documentation, but not calculated. This adds the general profit metric to /sys/kernel/debug/mm/ksm. 4. Add more metrics to ksm_stat This adds the process profit metric to /proc/<pid>/ksm_stat. 5. Add more tests to ksm_tests and ksm_functional_tests This adds an option to specify the merge type to the ksm_tests. This allows to test madvise and prctl KSM. It also adds a two new tests to ksm_functional_tests: one to test the new prctl options and the other one is a fork test to verify that the KSM process setting is inherited by client processes. This patch (of 3): So far KSM can only be enabled by calling madvise for memory regions. To be able to use KSM for more workloads, KSM needs to have the ability to be enabled / disabled at the process / cgroup level. 1. New options for prctl system command This patch series adds two new options to the prctl system call. The first one allows to enable KSM at the process level and the second one to query the setting. The setting will be inherited by child processes. With the above setting, KSM can be enabled for the seed process of a cgroup and all processes in the cgroup will inherit the setting. 2. Changes to KSM processing When KSM is enabled at the process level, the KSM code will iterate over all the VMA's and enable KSM for the eligible VMA's. When forking a process that has KSM enabled, the setting will be inherited by the new child process. 1) Introduce new MMF_VM_MERGE_ANY flag This introduces the new flag MMF_VM_MERGE_ANY flag. When this flag is set, kernel samepage merging (ksm) gets enabled for all vma's of a process. 2) Setting VM_MERGEABLE on VMA creation When a VMA is created, if the MMF_VM_MERGE_ANY flag is set, the VM_MERGEABLE flag will be set for this VMA. 3) support disabling of ksm for a process This adds the ability to disable ksm for a process if ksm has been enabled for the process with prctl. 4) add new prctl option to get and set ksm for a process This adds two new options to the prctl system call - enable ksm for all vmas of a process (if the vmas support it). - query if ksm has been enabled for a process. 3. Disabling MMF_VM_MERGE_ANY for storage keys in s390 In the s390 architecture when storage keys are used, the MMF_VM_MERGE_ANY will be disabled. Link: https://lkml.kernel.org/r/20230418051342.1919757-1-shr@devkernel.io Link: https://lkml.kernel.org/r/20230418051342.1919757-2-shr@devkernel.io Signed-off-by: Stefan Roesch <shr@devkernel.io> Acked-by: David Hildenbrand <david@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Rik van Riel <riel@surriel.com> Cc: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-18 05:13:40 +00:00
void ksm_add_vma(struct vm_area_struct *vma);
int ksm_enable_merge_any(struct mm_struct *mm);
int ksm_disable_merge_any(struct mm_struct *mm);
int ksm_disable(struct mm_struct *mm);
mm: add new api to enable ksm per process Patch series "mm: process/cgroup ksm support", v9. So far KSM can only be enabled by calling madvise for memory regions. To be able to use KSM for more workloads, KSM needs to have the ability to be enabled / disabled at the process / cgroup level. Use case 1: The madvise call is not available in the programming language. An example for this are programs with forked workloads using a garbage collected language without pointers. In such a language madvise cannot be made available. In addition the addresses of objects get moved around as they are garbage collected. KSM sharing needs to be enabled "from the outside" for these type of workloads. Use case 2: The same interpreter can also be used for workloads where KSM brings no benefit or even has overhead. We'd like to be able to enable KSM on a workload by workload basis. Use case 3: With the madvise call sharing opportunities are only enabled for the current process: it is a workload-local decision. A considerable number of sharing opportunities may exist across multiple workloads or jobs (if they are part of the same security domain). Only a higler level entity like a job scheduler or container can know for certain if its running one or more instances of a job. That job scheduler however doesn't have the necessary internal workload knowledge to make targeted madvise calls. Security concerns: In previous discussions security concerns have been brought up. The problem is that an individual workload does not have the knowledge about what else is running on a machine. Therefore it has to be very conservative in what memory areas can be shared or not. However, if the system is dedicated to running multiple jobs within the same security domain, its the job scheduler that has the knowledge that sharing can be safely enabled and is even desirable. Performance: Experiments with using UKSM have shown a capacity increase of around 20%. Here are the metrics from an instagram workload (taken from a machine with 64GB main memory): full_scans: 445 general_profit: 20158298048 max_page_sharing: 256 merge_across_nodes: 1 pages_shared: 129547 pages_sharing: 5119146 pages_to_scan: 4000 pages_unshared: 1760924 pages_volatile: 10761341 run: 1 sleep_millisecs: 20 stable_node_chains: 167 stable_node_chains_prune_millisecs: 2000 stable_node_dups: 2751 use_zero_pages: 0 zero_pages_sharing: 0 After the service is running for 30 minutes to an hour, 4 to 5 million shared pages are common for this workload when using KSM. Detailed changes: 1. New options for prctl system command This patch series adds two new options to the prctl system call. The first one allows to enable KSM at the process level and the second one to query the setting. The setting will be inherited by child processes. With the above setting, KSM can be enabled for the seed process of a cgroup and all processes in the cgroup will inherit the setting. 2. Changes to KSM processing When KSM is enabled at the process level, the KSM code will iterate over all the VMA's and enable KSM for the eligible VMA's. When forking a process that has KSM enabled, the setting will be inherited by the new child process. 3. Add general_profit metric The general_profit metric of KSM is specified in the documentation, but not calculated. This adds the general profit metric to /sys/kernel/debug/mm/ksm. 4. Add more metrics to ksm_stat This adds the process profit metric to /proc/<pid>/ksm_stat. 5. Add more tests to ksm_tests and ksm_functional_tests This adds an option to specify the merge type to the ksm_tests. This allows to test madvise and prctl KSM. It also adds a two new tests to ksm_functional_tests: one to test the new prctl options and the other one is a fork test to verify that the KSM process setting is inherited by client processes. This patch (of 3): So far KSM can only be enabled by calling madvise for memory regions. To be able to use KSM for more workloads, KSM needs to have the ability to be enabled / disabled at the process / cgroup level. 1. New options for prctl system command This patch series adds two new options to the prctl system call. The first one allows to enable KSM at the process level and the second one to query the setting. The setting will be inherited by child processes. With the above setting, KSM can be enabled for the seed process of a cgroup and all processes in the cgroup will inherit the setting. 2. Changes to KSM processing When KSM is enabled at the process level, the KSM code will iterate over all the VMA's and enable KSM for the eligible VMA's. When forking a process that has KSM enabled, the setting will be inherited by the new child process. 1) Introduce new MMF_VM_MERGE_ANY flag This introduces the new flag MMF_VM_MERGE_ANY flag. When this flag is set, kernel samepage merging (ksm) gets enabled for all vma's of a process. 2) Setting VM_MERGEABLE on VMA creation When a VMA is created, if the MMF_VM_MERGE_ANY flag is set, the VM_MERGEABLE flag will be set for this VMA. 3) support disabling of ksm for a process This adds the ability to disable ksm for a process if ksm has been enabled for the process with prctl. 4) add new prctl option to get and set ksm for a process This adds two new options to the prctl system call - enable ksm for all vmas of a process (if the vmas support it). - query if ksm has been enabled for a process. 3. Disabling MMF_VM_MERGE_ANY for storage keys in s390 In the s390 architecture when storage keys are used, the MMF_VM_MERGE_ANY will be disabled. Link: https://lkml.kernel.org/r/20230418051342.1919757-1-shr@devkernel.io Link: https://lkml.kernel.org/r/20230418051342.1919757-2-shr@devkernel.io Signed-off-by: Stefan Roesch <shr@devkernel.io> Acked-by: David Hildenbrand <david@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Rik van Riel <riel@surriel.com> Cc: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-18 05:13:40 +00:00
ksm: the mm interface to ksm This patch presents the mm interface to a dummy version of ksm.c, for better scrutiny of that interface: the real ksm.c follows later. When CONFIG_KSM is not set, madvise(2) reject MADV_MERGEABLE and MADV_UNMERGEABLE with EINVAL, since that seems more helpful than pretending that they can be serviced. But when CONFIG_KSM=y, accept them even if KSM is not currently running, and even on areas which KSM will not touch (e.g. hugetlb or shared file or special driver mappings). Like other madvices, report ENOMEM despite success if any area in the range is unmapped, and use EAGAIN to report out of memory. Define vma flag VM_MERGEABLE to identify an area on which KSM may try merging pages: leave it to ksm_madvise() to decide whether to set it. Define mm flag MMF_VM_MERGEABLE to identify an mm which might contain VM_MERGEABLE areas, to minimize callouts when forking or exiting. Based upon earlier patches by Chris Wright and Izik Eidus. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Chris Wright <chrisw@redhat.com> Signed-off-by: Izik Eidus <ieidus@redhat.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Avi Kivity <avi@redhat.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 00:01:57 +00:00
int __ksm_enter(struct mm_struct *mm);
ksm: fix deadlock with munlock in exit_mmap Rawhide users have reported hang at startup when cryptsetup is run: the same problem can be simply reproduced by running a program int main() { mlockall(MCL_CURRENT | MCL_FUTURE); return 0; } The problem is that exit_mmap() applies munlock_vma_pages_all() to clean up VM_LOCKED areas, and its current implementation (stupidly) tries to fault in absent pages, for example where PROT_NONE prevented them being faulted in when mlocking. Whereas the "ksm: fix oom deadlock" patch, knowing there's a race by which KSM might try to fault in pages after exit_mmap() had finally zapped the range, backs out of such faults doing nothing when its ksm_test_exit() notices mm_users 0. So revert that part of "ksm: fix oom deadlock" which moved the ksm_exit() call from before exit_mmap() to the middle of exit_mmap(); and remove those ksm_test_exit() checks from the page fault paths, so allowing the munlocking to proceed without interference. ksm_exit, if there are rmap_items still chained on this mm slot, takes mmap_sem write side: so preventing KSM from working on an mm while exit_mmap runs. And KSM will bail out as soon as it notices that mm_users is already zero, thanks to its internal ksm_test_exit checks. So that when a task is killed by OOM killer or the user, KSM will not indefinitely prevent it from running exit_mmap to release its memory. This does break a part of what "ksm: fix oom deadlock" was trying to achieve. When unmerging KSM (echo 2 >/sys/kernel/mm/ksm), and even when ksmd itself has to cancel a KSM page, it is possible that the first OOM-kill victim would be the KSM process being faulted: then its memory won't be freed until a second victim has been selected (freeing memory for the unmerging fault to complete). But the OOM killer is already liable to kill a second victim once the intended victim's p->mm goes to NULL: so there's not much point in rejecting this KSM patch before fixing that OOM behaviour. It is very much more important to allow KSM users to boot up, than to haggle over an unlikely and poorly supported OOM case. We also intend to fix munlocking to not fault pages: at which point this patch _could_ be reverted; though that would be controversial, so we hope to find a better solution. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Justin M. Forbes <jforbes@redhat.com> Acked-for-now-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Izik Eidus <ieidus@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 00:02:22 +00:00
void __ksm_exit(struct mm_struct *mm);
ksm: support unsharing KSM-placed zero pages Patch series "ksm: support tracking KSM-placed zero-pages", v10. The core idea of this patch set is to enable users to perceive the number of any pages merged by KSM, regardless of whether use_zero_page switch has been turned on, so that users can know how much free memory increase is really due to their madvise(MERGEABLE) actions. But the problem is, when enabling use_zero_pages, all empty pages will be merged with kernel zero pages instead of with each other as use_zero_pages is disabled, and then these zero-pages are no longer monitored by KSM. The motivations to do this is seen at: https://lore.kernel.org/lkml/202302100915227721315@zte.com.cn/ In one word, we hope to implement the support for KSM-placed zero pages tracking without affecting the feature of use_zero_pages, so that app developer can also benefit from knowing the actual KSM profit by getting KSM-placed zero pages to optimize applications eventually when /sys/kernel/mm/ksm/use_zero_pages is enabled. This patch (of 5): When use_zero_pages of ksm is enabled, madvise(addr, len, MADV_UNMERGEABLE) and other ways (like write 2 to /sys/kernel/mm/ksm/run) to trigger unsharing will *not* actually unshare the shared zeropage as placed by KSM (which is against the MADV_UNMERGEABLE documentation). As these KSM-placed zero pages are out of the control of KSM, the related counts of ksm pages don't expose how many zero pages are placed by KSM (these special zero pages are different from those initially mapped zero pages, because the zero pages mapped to MADV_UNMERGEABLE areas are expected to be a complete and unshared page). To not blindly unshare all shared zero_pages in applicable VMAs, the patch use pte_mkdirty (related with architecture) to mark KSM-placed zero pages. Thus, MADV_UNMERGEABLE will only unshare those KSM-placed zero pages. In addition, we'll reuse this mechanism to reliably identify KSM-placed ZeroPages to properly account for them (e.g., calculating the KSM profit that includes zeropages) in the latter patches. The patch will not degrade the performance of use_zero_pages as it doesn't change the way of merging empty pages in use_zero_pages's feature. Link: https://lkml.kernel.org/r/202306131104554703428@zte.com.cn Link: https://lkml.kernel.org/r/20230613030928.185882-1-yang.yang29@zte.com.cn Signed-off-by: xu xin <xu.xin16@zte.com.cn> Acked-by: David Hildenbrand <david@redhat.com> Cc: Claudio Imbrenda <imbrenda@linux.ibm.com> Cc: Xuexin Jiang <jiang.xuexin@zte.com.cn> Reviewed-by: Xiaokai Ran <ran.xiaokai@zte.com.cn> Reviewed-by: Yang Yang <yang.yang29@zte.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-13 03:09:28 +00:00
/*
* To identify zeropages that were mapped by KSM, we reuse the dirty bit
* in the PTE. If the PTE is dirty, the zeropage was mapped by KSM when
* deduplicating memory.
*/
#define is_ksm_zero_pte(pte) (is_zero_pfn(pte_pfn(pte)) && pte_dirty(pte))
ksm: the mm interface to ksm This patch presents the mm interface to a dummy version of ksm.c, for better scrutiny of that interface: the real ksm.c follows later. When CONFIG_KSM is not set, madvise(2) reject MADV_MERGEABLE and MADV_UNMERGEABLE with EINVAL, since that seems more helpful than pretending that they can be serviced. But when CONFIG_KSM=y, accept them even if KSM is not currently running, and even on areas which KSM will not touch (e.g. hugetlb or shared file or special driver mappings). Like other madvices, report ENOMEM despite success if any area in the range is unmapped, and use EAGAIN to report out of memory. Define vma flag VM_MERGEABLE to identify an area on which KSM may try merging pages: leave it to ksm_madvise() to decide whether to set it. Define mm flag MMF_VM_MERGEABLE to identify an mm which might contain VM_MERGEABLE areas, to minimize callouts when forking or exiting. Based upon earlier patches by Chris Wright and Izik Eidus. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Chris Wright <chrisw@redhat.com> Signed-off-by: Izik Eidus <ieidus@redhat.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Avi Kivity <avi@redhat.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 00:01:57 +00:00
extern unsigned long ksm_zero_pages;
static inline void ksm_might_unmap_zero_page(struct mm_struct *mm, pte_t pte)
{
if (is_ksm_zero_pte(pte)) {
ksm_zero_pages--;
mm->ksm_zero_pages--;
}
}
ksm: the mm interface to ksm This patch presents the mm interface to a dummy version of ksm.c, for better scrutiny of that interface: the real ksm.c follows later. When CONFIG_KSM is not set, madvise(2) reject MADV_MERGEABLE and MADV_UNMERGEABLE with EINVAL, since that seems more helpful than pretending that they can be serviced. But when CONFIG_KSM=y, accept them even if KSM is not currently running, and even on areas which KSM will not touch (e.g. hugetlb or shared file or special driver mappings). Like other madvices, report ENOMEM despite success if any area in the range is unmapped, and use EAGAIN to report out of memory. Define vma flag VM_MERGEABLE to identify an area on which KSM may try merging pages: leave it to ksm_madvise() to decide whether to set it. Define mm flag MMF_VM_MERGEABLE to identify an mm which might contain VM_MERGEABLE areas, to minimize callouts when forking or exiting. Based upon earlier patches by Chris Wright and Izik Eidus. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Chris Wright <chrisw@redhat.com> Signed-off-by: Izik Eidus <ieidus@redhat.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Avi Kivity <avi@redhat.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 00:01:57 +00:00
static inline int ksm_fork(struct mm_struct *mm, struct mm_struct *oldmm)
{
mm: add new api to enable ksm per process Patch series "mm: process/cgroup ksm support", v9. So far KSM can only be enabled by calling madvise for memory regions. To be able to use KSM for more workloads, KSM needs to have the ability to be enabled / disabled at the process / cgroup level. Use case 1: The madvise call is not available in the programming language. An example for this are programs with forked workloads using a garbage collected language without pointers. In such a language madvise cannot be made available. In addition the addresses of objects get moved around as they are garbage collected. KSM sharing needs to be enabled "from the outside" for these type of workloads. Use case 2: The same interpreter can also be used for workloads where KSM brings no benefit or even has overhead. We'd like to be able to enable KSM on a workload by workload basis. Use case 3: With the madvise call sharing opportunities are only enabled for the current process: it is a workload-local decision. A considerable number of sharing opportunities may exist across multiple workloads or jobs (if they are part of the same security domain). Only a higler level entity like a job scheduler or container can know for certain if its running one or more instances of a job. That job scheduler however doesn't have the necessary internal workload knowledge to make targeted madvise calls. Security concerns: In previous discussions security concerns have been brought up. The problem is that an individual workload does not have the knowledge about what else is running on a machine. Therefore it has to be very conservative in what memory areas can be shared or not. However, if the system is dedicated to running multiple jobs within the same security domain, its the job scheduler that has the knowledge that sharing can be safely enabled and is even desirable. Performance: Experiments with using UKSM have shown a capacity increase of around 20%. Here are the metrics from an instagram workload (taken from a machine with 64GB main memory): full_scans: 445 general_profit: 20158298048 max_page_sharing: 256 merge_across_nodes: 1 pages_shared: 129547 pages_sharing: 5119146 pages_to_scan: 4000 pages_unshared: 1760924 pages_volatile: 10761341 run: 1 sleep_millisecs: 20 stable_node_chains: 167 stable_node_chains_prune_millisecs: 2000 stable_node_dups: 2751 use_zero_pages: 0 zero_pages_sharing: 0 After the service is running for 30 minutes to an hour, 4 to 5 million shared pages are common for this workload when using KSM. Detailed changes: 1. New options for prctl system command This patch series adds two new options to the prctl system call. The first one allows to enable KSM at the process level and the second one to query the setting. The setting will be inherited by child processes. With the above setting, KSM can be enabled for the seed process of a cgroup and all processes in the cgroup will inherit the setting. 2. Changes to KSM processing When KSM is enabled at the process level, the KSM code will iterate over all the VMA's and enable KSM for the eligible VMA's. When forking a process that has KSM enabled, the setting will be inherited by the new child process. 3. Add general_profit metric The general_profit metric of KSM is specified in the documentation, but not calculated. This adds the general profit metric to /sys/kernel/debug/mm/ksm. 4. Add more metrics to ksm_stat This adds the process profit metric to /proc/<pid>/ksm_stat. 5. Add more tests to ksm_tests and ksm_functional_tests This adds an option to specify the merge type to the ksm_tests. This allows to test madvise and prctl KSM. It also adds a two new tests to ksm_functional_tests: one to test the new prctl options and the other one is a fork test to verify that the KSM process setting is inherited by client processes. This patch (of 3): So far KSM can only be enabled by calling madvise for memory regions. To be able to use KSM for more workloads, KSM needs to have the ability to be enabled / disabled at the process / cgroup level. 1. New options for prctl system command This patch series adds two new options to the prctl system call. The first one allows to enable KSM at the process level and the second one to query the setting. The setting will be inherited by child processes. With the above setting, KSM can be enabled for the seed process of a cgroup and all processes in the cgroup will inherit the setting. 2. Changes to KSM processing When KSM is enabled at the process level, the KSM code will iterate over all the VMA's and enable KSM for the eligible VMA's. When forking a process that has KSM enabled, the setting will be inherited by the new child process. 1) Introduce new MMF_VM_MERGE_ANY flag This introduces the new flag MMF_VM_MERGE_ANY flag. When this flag is set, kernel samepage merging (ksm) gets enabled for all vma's of a process. 2) Setting VM_MERGEABLE on VMA creation When a VMA is created, if the MMF_VM_MERGE_ANY flag is set, the VM_MERGEABLE flag will be set for this VMA. 3) support disabling of ksm for a process This adds the ability to disable ksm for a process if ksm has been enabled for the process with prctl. 4) add new prctl option to get and set ksm for a process This adds two new options to the prctl system call - enable ksm for all vmas of a process (if the vmas support it). - query if ksm has been enabled for a process. 3. Disabling MMF_VM_MERGE_ANY for storage keys in s390 In the s390 architecture when storage keys are used, the MMF_VM_MERGE_ANY will be disabled. Link: https://lkml.kernel.org/r/20230418051342.1919757-1-shr@devkernel.io Link: https://lkml.kernel.org/r/20230418051342.1919757-2-shr@devkernel.io Signed-off-by: Stefan Roesch <shr@devkernel.io> Acked-by: David Hildenbrand <david@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Rik van Riel <riel@surriel.com> Cc: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-18 05:13:40 +00:00
int ret;
if (test_bit(MMF_VM_MERGEABLE, &oldmm->flags)) {
ret = __ksm_enter(mm);
if (ret)
return ret;
}
if (test_bit(MMF_VM_MERGE_ANY, &oldmm->flags))
set_bit(MMF_VM_MERGE_ANY, &mm->flags);
ksm: the mm interface to ksm This patch presents the mm interface to a dummy version of ksm.c, for better scrutiny of that interface: the real ksm.c follows later. When CONFIG_KSM is not set, madvise(2) reject MADV_MERGEABLE and MADV_UNMERGEABLE with EINVAL, since that seems more helpful than pretending that they can be serviced. But when CONFIG_KSM=y, accept them even if KSM is not currently running, and even on areas which KSM will not touch (e.g. hugetlb or shared file or special driver mappings). Like other madvices, report ENOMEM despite success if any area in the range is unmapped, and use EAGAIN to report out of memory. Define vma flag VM_MERGEABLE to identify an area on which KSM may try merging pages: leave it to ksm_madvise() to decide whether to set it. Define mm flag MMF_VM_MERGEABLE to identify an mm which might contain VM_MERGEABLE areas, to minimize callouts when forking or exiting. Based upon earlier patches by Chris Wright and Izik Eidus. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Chris Wright <chrisw@redhat.com> Signed-off-by: Izik Eidus <ieidus@redhat.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Avi Kivity <avi@redhat.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 00:01:57 +00:00
return 0;
}
ksm: fix deadlock with munlock in exit_mmap Rawhide users have reported hang at startup when cryptsetup is run: the same problem can be simply reproduced by running a program int main() { mlockall(MCL_CURRENT | MCL_FUTURE); return 0; } The problem is that exit_mmap() applies munlock_vma_pages_all() to clean up VM_LOCKED areas, and its current implementation (stupidly) tries to fault in absent pages, for example where PROT_NONE prevented them being faulted in when mlocking. Whereas the "ksm: fix oom deadlock" patch, knowing there's a race by which KSM might try to fault in pages after exit_mmap() had finally zapped the range, backs out of such faults doing nothing when its ksm_test_exit() notices mm_users 0. So revert that part of "ksm: fix oom deadlock" which moved the ksm_exit() call from before exit_mmap() to the middle of exit_mmap(); and remove those ksm_test_exit() checks from the page fault paths, so allowing the munlocking to proceed without interference. ksm_exit, if there are rmap_items still chained on this mm slot, takes mmap_sem write side: so preventing KSM from working on an mm while exit_mmap runs. And KSM will bail out as soon as it notices that mm_users is already zero, thanks to its internal ksm_test_exit checks. So that when a task is killed by OOM killer or the user, KSM will not indefinitely prevent it from running exit_mmap to release its memory. This does break a part of what "ksm: fix oom deadlock" was trying to achieve. When unmerging KSM (echo 2 >/sys/kernel/mm/ksm), and even when ksmd itself has to cancel a KSM page, it is possible that the first OOM-kill victim would be the KSM process being faulted: then its memory won't be freed until a second victim has been selected (freeing memory for the unmerging fault to complete). But the OOM killer is already liable to kill a second victim once the intended victim's p->mm goes to NULL: so there's not much point in rejecting this KSM patch before fixing that OOM behaviour. It is very much more important to allow KSM users to boot up, than to haggle over an unlikely and poorly supported OOM case. We also intend to fix munlocking to not fault pages: at which point this patch _could_ be reverted; though that would be controversial, so we hope to find a better solution. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Justin M. Forbes <jforbes@redhat.com> Acked-for-now-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Izik Eidus <ieidus@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 00:02:22 +00:00
static inline void ksm_exit(struct mm_struct *mm)
ksm: the mm interface to ksm This patch presents the mm interface to a dummy version of ksm.c, for better scrutiny of that interface: the real ksm.c follows later. When CONFIG_KSM is not set, madvise(2) reject MADV_MERGEABLE and MADV_UNMERGEABLE with EINVAL, since that seems more helpful than pretending that they can be serviced. But when CONFIG_KSM=y, accept them even if KSM is not currently running, and even on areas which KSM will not touch (e.g. hugetlb or shared file or special driver mappings). Like other madvices, report ENOMEM despite success if any area in the range is unmapped, and use EAGAIN to report out of memory. Define vma flag VM_MERGEABLE to identify an area on which KSM may try merging pages: leave it to ksm_madvise() to decide whether to set it. Define mm flag MMF_VM_MERGEABLE to identify an mm which might contain VM_MERGEABLE areas, to minimize callouts when forking or exiting. Based upon earlier patches by Chris Wright and Izik Eidus. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Chris Wright <chrisw@redhat.com> Signed-off-by: Izik Eidus <ieidus@redhat.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Avi Kivity <avi@redhat.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 00:01:57 +00:00
{
if (test_bit(MMF_VM_MERGEABLE, &mm->flags))
ksm: fix deadlock with munlock in exit_mmap Rawhide users have reported hang at startup when cryptsetup is run: the same problem can be simply reproduced by running a program int main() { mlockall(MCL_CURRENT | MCL_FUTURE); return 0; } The problem is that exit_mmap() applies munlock_vma_pages_all() to clean up VM_LOCKED areas, and its current implementation (stupidly) tries to fault in absent pages, for example where PROT_NONE prevented them being faulted in when mlocking. Whereas the "ksm: fix oom deadlock" patch, knowing there's a race by which KSM might try to fault in pages after exit_mmap() had finally zapped the range, backs out of such faults doing nothing when its ksm_test_exit() notices mm_users 0. So revert that part of "ksm: fix oom deadlock" which moved the ksm_exit() call from before exit_mmap() to the middle of exit_mmap(); and remove those ksm_test_exit() checks from the page fault paths, so allowing the munlocking to proceed without interference. ksm_exit, if there are rmap_items still chained on this mm slot, takes mmap_sem write side: so preventing KSM from working on an mm while exit_mmap runs. And KSM will bail out as soon as it notices that mm_users is already zero, thanks to its internal ksm_test_exit checks. So that when a task is killed by OOM killer or the user, KSM will not indefinitely prevent it from running exit_mmap to release its memory. This does break a part of what "ksm: fix oom deadlock" was trying to achieve. When unmerging KSM (echo 2 >/sys/kernel/mm/ksm), and even when ksmd itself has to cancel a KSM page, it is possible that the first OOM-kill victim would be the KSM process being faulted: then its memory won't be freed until a second victim has been selected (freeing memory for the unmerging fault to complete). But the OOM killer is already liable to kill a second victim once the intended victim's p->mm goes to NULL: so there's not much point in rejecting this KSM patch before fixing that OOM behaviour. It is very much more important to allow KSM users to boot up, than to haggle over an unlikely and poorly supported OOM case. We also intend to fix munlocking to not fault pages: at which point this patch _could_ be reverted; though that would be controversial, so we hope to find a better solution. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Justin M. Forbes <jforbes@redhat.com> Acked-for-now-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Izik Eidus <ieidus@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 00:02:22 +00:00
__ksm_exit(mm);
ksm: the mm interface to ksm This patch presents the mm interface to a dummy version of ksm.c, for better scrutiny of that interface: the real ksm.c follows later. When CONFIG_KSM is not set, madvise(2) reject MADV_MERGEABLE and MADV_UNMERGEABLE with EINVAL, since that seems more helpful than pretending that they can be serviced. But when CONFIG_KSM=y, accept them even if KSM is not currently running, and even on areas which KSM will not touch (e.g. hugetlb or shared file or special driver mappings). Like other madvices, report ENOMEM despite success if any area in the range is unmapped, and use EAGAIN to report out of memory. Define vma flag VM_MERGEABLE to identify an area on which KSM may try merging pages: leave it to ksm_madvise() to decide whether to set it. Define mm flag MMF_VM_MERGEABLE to identify an mm which might contain VM_MERGEABLE areas, to minimize callouts when forking or exiting. Based upon earlier patches by Chris Wright and Izik Eidus. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Chris Wright <chrisw@redhat.com> Signed-off-by: Izik Eidus <ieidus@redhat.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Avi Kivity <avi@redhat.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 00:01:57 +00:00
}
ksm: let shared pages be swappable Initial implementation for swapping out KSM's shared pages: add page_referenced_ksm() and try_to_unmap_ksm(), which rmap.c calls when faced with a PageKsm page. Most of what's needed can be got from the rmap_items listed from the stable_node of the ksm page, without discovering the actual vma: so in this patch just fake up a struct vma for page_referenced_one() or try_to_unmap_one(), then refine that in the next patch. Add VM_NONLINEAR to ksm_madvise()'s list of exclusions: it has always been implicit there (being only set with VM_SHARED, already excluded), but let's make it explicit, to help justify the lack of nonlinear unmap. Rely on the page lock to protect against concurrent modifications to that page's node of the stable tree. The awkward part is not swapout but swapin: do_swap_page() and page_add_anon_rmap() now have to allow for new possibilities - perhaps a ksm page still in swapcache, perhaps a swapcache page associated with one location in one anon_vma now needed for another location or anon_vma. (And the vma might even be no longer VM_MERGEABLE when that happens.) ksm_might_need_to_copy() checks for that case, and supplies a duplicate page when necessary, simply leaving it to a subsequent pass of ksmd to rediscover the identity and merge them back into one ksm page. Disappointingly primitive: but the alternative would have to accumulate unswappable info about the swapped out ksm pages, limiting swappability. Remove page_add_ksm_rmap(): page_add_anon_rmap() now has to allow for the particular case it was handling, so just use it instead. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Izik Eidus <ieidus@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Chris Wright <chrisw@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:59:24 +00:00
/*
* When do_swap_page() first faults in from swap what used to be a KSM page,
* no problem, it will be assigned to this vma's anon_vma; but thereafter,
* it might be faulted into a different anon_vma (or perhaps to a different
* offset in the same anon_vma). do_swap_page() cannot do all the locking
* needed to reconstitute a cross-anon_vma KSM page: for now it has to make
* a copy, and leave remerging the pages to a later pass of ksmd.
*
* We'd like to make this conditional on vma->vm_flags & VM_MERGEABLE,
* but what if the vma was unmerged while the page was swapped out?
*/
ksm: remove old stable nodes more thoroughly Switching merge_across_nodes after running KSM is liable to oops on stale nodes still left over from the previous stable tree. It's not something that people will often want to do, but it would be lame to demand a reboot when they're trying to determine which merge_across_nodes setting is best. How can this happen? We only permit switching merge_across_nodes when pages_shared is 0, and usually set run 2 to force that beforehand, which ought to unmerge everything: yet oopses still occur when you then run 1. Three causes: 1. The old stable tree (built according to the inverse merge_across_nodes) has not been fully torn down. A stable node lingers until get_ksm_page() notices that the page it references no longer references it: but the page is not necessarily freed as soon as expected, particularly when swapcache. Fix this with a pass through the old stable tree, applying get_ksm_page() to each of the remaining nodes (most found stale and removed immediately), with forced removal of any left over. Unless the page is still mapped: I've not seen that case, it shouldn't occur, but better to WARN_ON_ONCE and EBUSY than BUG. 2. __ksm_enter() has a nice little optimization, to insert the new mm just behind ksmd's cursor, so there's a full pass for it to stabilize (or be removed) before ksmd addresses it. Nice when ksmd is running, but not so nice when we're trying to unmerge all mms: we were missing those mms forked and inserted behind the unmerge cursor. Easily fixed by inserting at the end when KSM_RUN_UNMERGE. 3. It is possible for a KSM page to be faulted back from swapcache into an mm, just after unmerge_and_remove_all_rmap_items() scanned past it. Fix this by copying on fault when KSM_RUN_UNMERGE: but that is private to ksm.c, so dissolve the distinction between ksm_might_need_to_copy() and ksm_does_need_to_copy(), doing it all in the one call into ksm.c. A long outstanding, unrelated bugfix sneaks in with that third fix: ksm_does_need_to_copy() would copy from a !PageUptodate page (implying I/O error when read in from swap) to a page which it then marks Uptodate. Fix this case by not copying, letting do_swap_page() discover the error. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Petr Holasek <pholasek@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Izik Eidus <izik.eidus@ravellosystems.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Acked-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 00:35:08 +00:00
struct page *ksm_might_need_to_copy(struct page *page,
struct vm_area_struct *vma, unsigned long address);
ksm: let shared pages be swappable Initial implementation for swapping out KSM's shared pages: add page_referenced_ksm() and try_to_unmap_ksm(), which rmap.c calls when faced with a PageKsm page. Most of what's needed can be got from the rmap_items listed from the stable_node of the ksm page, without discovering the actual vma: so in this patch just fake up a struct vma for page_referenced_one() or try_to_unmap_one(), then refine that in the next patch. Add VM_NONLINEAR to ksm_madvise()'s list of exclusions: it has always been implicit there (being only set with VM_SHARED, already excluded), but let's make it explicit, to help justify the lack of nonlinear unmap. Rely on the page lock to protect against concurrent modifications to that page's node of the stable tree. The awkward part is not swapout but swapin: do_swap_page() and page_add_anon_rmap() now have to allow for new possibilities - perhaps a ksm page still in swapcache, perhaps a swapcache page associated with one location in one anon_vma now needed for another location or anon_vma. (And the vma might even be no longer VM_MERGEABLE when that happens.) ksm_might_need_to_copy() checks for that case, and supplies a duplicate page when necessary, simply leaving it to a subsequent pass of ksmd to rediscover the identity and merge them back into one ksm page. Disappointingly primitive: but the alternative would have to accumulate unswappable info about the swapped out ksm pages, limiting swappability. Remove page_add_ksm_rmap(): page_add_anon_rmap() now has to allow for the particular case it was handling, so just use it instead. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Izik Eidus <ieidus@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Chris Wright <chrisw@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:59:24 +00:00
mm: don't be stuck to rmap lock on reclaim path The rmap locks(i_mmap_rwsem and anon_vma->root->rwsem) could be contended under memory pressure if processes keep working on their vmas(e.g., fork, mmap, munmap). It makes reclaim path stuck. In our real workload traces, we see kswapd is waiting the lock for 300ms+(worst case, a sec) and it makes other processes entering direct reclaim, which were also stuck on the lock. This patch makes lru aging path try_lock mode like shink_page_list so the reclaim context will keep working with next lru pages without being stuck. if it found the rmap lock contended, it rotates the page back to head of lru in both active/inactive lrus to make them consistent behavior, which is basic starting point rather than adding more heristic. Since this patch introduces a new "contended" field as out-param along with try_lock in-param in rmap_walk_control, it's not immutable any longer if the try_lock is set so remove const keywords on rmap related functions. Since rmap walking is already expensive operation, I doubt the const would help sizable benefit( And we didn't have it until 5.17). In a heavy app workload in Android, trace shows following statistics. It almost removes rmap lock contention from reclaim path. Martin Liu reported: Before: max_dur(ms) min_dur(ms) max-min(dur)ms avg_dur(ms) sum_dur(ms) count blocked_function 1632 0 1631 151.542173 31672 209 page_lock_anon_vma_read 601 0 601 145.544681 28817 198 rmap_walk_file After: max_dur(ms) min_dur(ms) max-min(dur)ms avg_dur(ms) sum_dur(ms) count blocked_function NaN NaN NaN NaN NaN 0.0 NaN 0 0 0 0.127645 1 12 rmap_walk_file [minchan@kernel.org: add comment, per Matthew] Link: https://lkml.kernel.org/r/YnNqeB5tUf6LZ57b@google.com Link: https://lkml.kernel.org/r/20220510215423.164547-1-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: John Dias <joaodias@google.com> Cc: Tim Murray <timmurray@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Martin Liu <liumartin@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-19 21:08:54 +00:00
void rmap_walk_ksm(struct folio *folio, struct rmap_walk_control *rwc);
void folio_migrate_ksm(struct folio *newfolio, struct folio *folio);
ksm: let shared pages be swappable Initial implementation for swapping out KSM's shared pages: add page_referenced_ksm() and try_to_unmap_ksm(), which rmap.c calls when faced with a PageKsm page. Most of what's needed can be got from the rmap_items listed from the stable_node of the ksm page, without discovering the actual vma: so in this patch just fake up a struct vma for page_referenced_one() or try_to_unmap_one(), then refine that in the next patch. Add VM_NONLINEAR to ksm_madvise()'s list of exclusions: it has always been implicit there (being only set with VM_SHARED, already excluded), but let's make it explicit, to help justify the lack of nonlinear unmap. Rely on the page lock to protect against concurrent modifications to that page's node of the stable tree. The awkward part is not swapout but swapin: do_swap_page() and page_add_anon_rmap() now have to allow for new possibilities - perhaps a ksm page still in swapcache, perhaps a swapcache page associated with one location in one anon_vma now needed for another location or anon_vma. (And the vma might even be no longer VM_MERGEABLE when that happens.) ksm_might_need_to_copy() checks for that case, and supplies a duplicate page when necessary, simply leaving it to a subsequent pass of ksmd to rediscover the identity and merge them back into one ksm page. Disappointingly primitive: but the alternative would have to accumulate unswappable info about the swapped out ksm pages, limiting swappability. Remove page_add_ksm_rmap(): page_add_anon_rmap() now has to allow for the particular case it was handling, so just use it instead. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Izik Eidus <ieidus@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Chris Wright <chrisw@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:59:24 +00:00
#ifdef CONFIG_MEMORY_FAILURE
void collect_procs_ksm(struct page *page, struct list_head *to_kill,
int force_early);
#endif
#ifdef CONFIG_PROC_FS
long ksm_process_profit(struct mm_struct *);
#endif /* CONFIG_PROC_FS */
ksm: the mm interface to ksm This patch presents the mm interface to a dummy version of ksm.c, for better scrutiny of that interface: the real ksm.c follows later. When CONFIG_KSM is not set, madvise(2) reject MADV_MERGEABLE and MADV_UNMERGEABLE with EINVAL, since that seems more helpful than pretending that they can be serviced. But when CONFIG_KSM=y, accept them even if KSM is not currently running, and even on areas which KSM will not touch (e.g. hugetlb or shared file or special driver mappings). Like other madvices, report ENOMEM despite success if any area in the range is unmapped, and use EAGAIN to report out of memory. Define vma flag VM_MERGEABLE to identify an area on which KSM may try merging pages: leave it to ksm_madvise() to decide whether to set it. Define mm flag MMF_VM_MERGEABLE to identify an mm which might contain VM_MERGEABLE areas, to minimize callouts when forking or exiting. Based upon earlier patches by Chris Wright and Izik Eidus. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Chris Wright <chrisw@redhat.com> Signed-off-by: Izik Eidus <ieidus@redhat.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Avi Kivity <avi@redhat.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 00:01:57 +00:00
#else /* !CONFIG_KSM */
mm: add new api to enable ksm per process Patch series "mm: process/cgroup ksm support", v9. So far KSM can only be enabled by calling madvise for memory regions. To be able to use KSM for more workloads, KSM needs to have the ability to be enabled / disabled at the process / cgroup level. Use case 1: The madvise call is not available in the programming language. An example for this are programs with forked workloads using a garbage collected language without pointers. In such a language madvise cannot be made available. In addition the addresses of objects get moved around as they are garbage collected. KSM sharing needs to be enabled "from the outside" for these type of workloads. Use case 2: The same interpreter can also be used for workloads where KSM brings no benefit or even has overhead. We'd like to be able to enable KSM on a workload by workload basis. Use case 3: With the madvise call sharing opportunities are only enabled for the current process: it is a workload-local decision. A considerable number of sharing opportunities may exist across multiple workloads or jobs (if they are part of the same security domain). Only a higler level entity like a job scheduler or container can know for certain if its running one or more instances of a job. That job scheduler however doesn't have the necessary internal workload knowledge to make targeted madvise calls. Security concerns: In previous discussions security concerns have been brought up. The problem is that an individual workload does not have the knowledge about what else is running on a machine. Therefore it has to be very conservative in what memory areas can be shared or not. However, if the system is dedicated to running multiple jobs within the same security domain, its the job scheduler that has the knowledge that sharing can be safely enabled and is even desirable. Performance: Experiments with using UKSM have shown a capacity increase of around 20%. Here are the metrics from an instagram workload (taken from a machine with 64GB main memory): full_scans: 445 general_profit: 20158298048 max_page_sharing: 256 merge_across_nodes: 1 pages_shared: 129547 pages_sharing: 5119146 pages_to_scan: 4000 pages_unshared: 1760924 pages_volatile: 10761341 run: 1 sleep_millisecs: 20 stable_node_chains: 167 stable_node_chains_prune_millisecs: 2000 stable_node_dups: 2751 use_zero_pages: 0 zero_pages_sharing: 0 After the service is running for 30 minutes to an hour, 4 to 5 million shared pages are common for this workload when using KSM. Detailed changes: 1. New options for prctl system command This patch series adds two new options to the prctl system call. The first one allows to enable KSM at the process level and the second one to query the setting. The setting will be inherited by child processes. With the above setting, KSM can be enabled for the seed process of a cgroup and all processes in the cgroup will inherit the setting. 2. Changes to KSM processing When KSM is enabled at the process level, the KSM code will iterate over all the VMA's and enable KSM for the eligible VMA's. When forking a process that has KSM enabled, the setting will be inherited by the new child process. 3. Add general_profit metric The general_profit metric of KSM is specified in the documentation, but not calculated. This adds the general profit metric to /sys/kernel/debug/mm/ksm. 4. Add more metrics to ksm_stat This adds the process profit metric to /proc/<pid>/ksm_stat. 5. Add more tests to ksm_tests and ksm_functional_tests This adds an option to specify the merge type to the ksm_tests. This allows to test madvise and prctl KSM. It also adds a two new tests to ksm_functional_tests: one to test the new prctl options and the other one is a fork test to verify that the KSM process setting is inherited by client processes. This patch (of 3): So far KSM can only be enabled by calling madvise for memory regions. To be able to use KSM for more workloads, KSM needs to have the ability to be enabled / disabled at the process / cgroup level. 1. New options for prctl system command This patch series adds two new options to the prctl system call. The first one allows to enable KSM at the process level and the second one to query the setting. The setting will be inherited by child processes. With the above setting, KSM can be enabled for the seed process of a cgroup and all processes in the cgroup will inherit the setting. 2. Changes to KSM processing When KSM is enabled at the process level, the KSM code will iterate over all the VMA's and enable KSM for the eligible VMA's. When forking a process that has KSM enabled, the setting will be inherited by the new child process. 1) Introduce new MMF_VM_MERGE_ANY flag This introduces the new flag MMF_VM_MERGE_ANY flag. When this flag is set, kernel samepage merging (ksm) gets enabled for all vma's of a process. 2) Setting VM_MERGEABLE on VMA creation When a VMA is created, if the MMF_VM_MERGE_ANY flag is set, the VM_MERGEABLE flag will be set for this VMA. 3) support disabling of ksm for a process This adds the ability to disable ksm for a process if ksm has been enabled for the process with prctl. 4) add new prctl option to get and set ksm for a process This adds two new options to the prctl system call - enable ksm for all vmas of a process (if the vmas support it). - query if ksm has been enabled for a process. 3. Disabling MMF_VM_MERGE_ANY for storage keys in s390 In the s390 architecture when storage keys are used, the MMF_VM_MERGE_ANY will be disabled. Link: https://lkml.kernel.org/r/20230418051342.1919757-1-shr@devkernel.io Link: https://lkml.kernel.org/r/20230418051342.1919757-2-shr@devkernel.io Signed-off-by: Stefan Roesch <shr@devkernel.io> Acked-by: David Hildenbrand <david@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Rik van Riel <riel@surriel.com> Cc: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-18 05:13:40 +00:00
static inline void ksm_add_vma(struct vm_area_struct *vma)
{
}
static inline int ksm_disable(struct mm_struct *mm)
{
return 0;
}
ksm: the mm interface to ksm This patch presents the mm interface to a dummy version of ksm.c, for better scrutiny of that interface: the real ksm.c follows later. When CONFIG_KSM is not set, madvise(2) reject MADV_MERGEABLE and MADV_UNMERGEABLE with EINVAL, since that seems more helpful than pretending that they can be serviced. But when CONFIG_KSM=y, accept them even if KSM is not currently running, and even on areas which KSM will not touch (e.g. hugetlb or shared file or special driver mappings). Like other madvices, report ENOMEM despite success if any area in the range is unmapped, and use EAGAIN to report out of memory. Define vma flag VM_MERGEABLE to identify an area on which KSM may try merging pages: leave it to ksm_madvise() to decide whether to set it. Define mm flag MMF_VM_MERGEABLE to identify an mm which might contain VM_MERGEABLE areas, to minimize callouts when forking or exiting. Based upon earlier patches by Chris Wright and Izik Eidus. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Chris Wright <chrisw@redhat.com> Signed-off-by: Izik Eidus <ieidus@redhat.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Avi Kivity <avi@redhat.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 00:01:57 +00:00
static inline int ksm_fork(struct mm_struct *mm, struct mm_struct *oldmm)
{
return 0;
}
ksm: fix deadlock with munlock in exit_mmap Rawhide users have reported hang at startup when cryptsetup is run: the same problem can be simply reproduced by running a program int main() { mlockall(MCL_CURRENT | MCL_FUTURE); return 0; } The problem is that exit_mmap() applies munlock_vma_pages_all() to clean up VM_LOCKED areas, and its current implementation (stupidly) tries to fault in absent pages, for example where PROT_NONE prevented them being faulted in when mlocking. Whereas the "ksm: fix oom deadlock" patch, knowing there's a race by which KSM might try to fault in pages after exit_mmap() had finally zapped the range, backs out of such faults doing nothing when its ksm_test_exit() notices mm_users 0. So revert that part of "ksm: fix oom deadlock" which moved the ksm_exit() call from before exit_mmap() to the middle of exit_mmap(); and remove those ksm_test_exit() checks from the page fault paths, so allowing the munlocking to proceed without interference. ksm_exit, if there are rmap_items still chained on this mm slot, takes mmap_sem write side: so preventing KSM from working on an mm while exit_mmap runs. And KSM will bail out as soon as it notices that mm_users is already zero, thanks to its internal ksm_test_exit checks. So that when a task is killed by OOM killer or the user, KSM will not indefinitely prevent it from running exit_mmap to release its memory. This does break a part of what "ksm: fix oom deadlock" was trying to achieve. When unmerging KSM (echo 2 >/sys/kernel/mm/ksm), and even when ksmd itself has to cancel a KSM page, it is possible that the first OOM-kill victim would be the KSM process being faulted: then its memory won't be freed until a second victim has been selected (freeing memory for the unmerging fault to complete). But the OOM killer is already liable to kill a second victim once the intended victim's p->mm goes to NULL: so there's not much point in rejecting this KSM patch before fixing that OOM behaviour. It is very much more important to allow KSM users to boot up, than to haggle over an unlikely and poorly supported OOM case. We also intend to fix munlocking to not fault pages: at which point this patch _could_ be reverted; though that would be controversial, so we hope to find a better solution. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Justin M. Forbes <jforbes@redhat.com> Acked-for-now-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Izik Eidus <ieidus@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 00:02:22 +00:00
static inline void ksm_exit(struct mm_struct *mm)
ksm: the mm interface to ksm This patch presents the mm interface to a dummy version of ksm.c, for better scrutiny of that interface: the real ksm.c follows later. When CONFIG_KSM is not set, madvise(2) reject MADV_MERGEABLE and MADV_UNMERGEABLE with EINVAL, since that seems more helpful than pretending that they can be serviced. But when CONFIG_KSM=y, accept them even if KSM is not currently running, and even on areas which KSM will not touch (e.g. hugetlb or shared file or special driver mappings). Like other madvices, report ENOMEM despite success if any area in the range is unmapped, and use EAGAIN to report out of memory. Define vma flag VM_MERGEABLE to identify an area on which KSM may try merging pages: leave it to ksm_madvise() to decide whether to set it. Define mm flag MMF_VM_MERGEABLE to identify an mm which might contain VM_MERGEABLE areas, to minimize callouts when forking or exiting. Based upon earlier patches by Chris Wright and Izik Eidus. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Chris Wright <chrisw@redhat.com> Signed-off-by: Izik Eidus <ieidus@redhat.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Avi Kivity <avi@redhat.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 00:01:57 +00:00
{
}
static inline void ksm_might_unmap_zero_page(struct mm_struct *mm, pte_t pte)
{
}
#ifdef CONFIG_MEMORY_FAILURE
static inline void collect_procs_ksm(struct page *page,
struct list_head *to_kill, int force_early)
{
}
#endif
#ifdef CONFIG_MMU
static inline int ksm_madvise(struct vm_area_struct *vma, unsigned long start,
unsigned long end, int advice, unsigned long *vm_flags)
{
return 0;
}
ksm: remove old stable nodes more thoroughly Switching merge_across_nodes after running KSM is liable to oops on stale nodes still left over from the previous stable tree. It's not something that people will often want to do, but it would be lame to demand a reboot when they're trying to determine which merge_across_nodes setting is best. How can this happen? We only permit switching merge_across_nodes when pages_shared is 0, and usually set run 2 to force that beforehand, which ought to unmerge everything: yet oopses still occur when you then run 1. Three causes: 1. The old stable tree (built according to the inverse merge_across_nodes) has not been fully torn down. A stable node lingers until get_ksm_page() notices that the page it references no longer references it: but the page is not necessarily freed as soon as expected, particularly when swapcache. Fix this with a pass through the old stable tree, applying get_ksm_page() to each of the remaining nodes (most found stale and removed immediately), with forced removal of any left over. Unless the page is still mapped: I've not seen that case, it shouldn't occur, but better to WARN_ON_ONCE and EBUSY than BUG. 2. __ksm_enter() has a nice little optimization, to insert the new mm just behind ksmd's cursor, so there's a full pass for it to stabilize (or be removed) before ksmd addresses it. Nice when ksmd is running, but not so nice when we're trying to unmerge all mms: we were missing those mms forked and inserted behind the unmerge cursor. Easily fixed by inserting at the end when KSM_RUN_UNMERGE. 3. It is possible for a KSM page to be faulted back from swapcache into an mm, just after unmerge_and_remove_all_rmap_items() scanned past it. Fix this by copying on fault when KSM_RUN_UNMERGE: but that is private to ksm.c, so dissolve the distinction between ksm_might_need_to_copy() and ksm_does_need_to_copy(), doing it all in the one call into ksm.c. A long outstanding, unrelated bugfix sneaks in with that third fix: ksm_does_need_to_copy() would copy from a !PageUptodate page (implying I/O error when read in from swap) to a page which it then marks Uptodate. Fix this case by not copying, letting do_swap_page() discover the error. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Petr Holasek <pholasek@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Izik Eidus <izik.eidus@ravellosystems.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Acked-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 00:35:08 +00:00
static inline struct page *ksm_might_need_to_copy(struct page *page,
ksm: let shared pages be swappable Initial implementation for swapping out KSM's shared pages: add page_referenced_ksm() and try_to_unmap_ksm(), which rmap.c calls when faced with a PageKsm page. Most of what's needed can be got from the rmap_items listed from the stable_node of the ksm page, without discovering the actual vma: so in this patch just fake up a struct vma for page_referenced_one() or try_to_unmap_one(), then refine that in the next patch. Add VM_NONLINEAR to ksm_madvise()'s list of exclusions: it has always been implicit there (being only set with VM_SHARED, already excluded), but let's make it explicit, to help justify the lack of nonlinear unmap. Rely on the page lock to protect against concurrent modifications to that page's node of the stable tree. The awkward part is not swapout but swapin: do_swap_page() and page_add_anon_rmap() now have to allow for new possibilities - perhaps a ksm page still in swapcache, perhaps a swapcache page associated with one location in one anon_vma now needed for another location or anon_vma. (And the vma might even be no longer VM_MERGEABLE when that happens.) ksm_might_need_to_copy() checks for that case, and supplies a duplicate page when necessary, simply leaving it to a subsequent pass of ksmd to rediscover the identity and merge them back into one ksm page. Disappointingly primitive: but the alternative would have to accumulate unswappable info about the swapped out ksm pages, limiting swappability. Remove page_add_ksm_rmap(): page_add_anon_rmap() now has to allow for the particular case it was handling, so just use it instead. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Izik Eidus <ieidus@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Chris Wright <chrisw@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:59:24 +00:00
struct vm_area_struct *vma, unsigned long address)
{
ksm: remove old stable nodes more thoroughly Switching merge_across_nodes after running KSM is liable to oops on stale nodes still left over from the previous stable tree. It's not something that people will often want to do, but it would be lame to demand a reboot when they're trying to determine which merge_across_nodes setting is best. How can this happen? We only permit switching merge_across_nodes when pages_shared is 0, and usually set run 2 to force that beforehand, which ought to unmerge everything: yet oopses still occur when you then run 1. Three causes: 1. The old stable tree (built according to the inverse merge_across_nodes) has not been fully torn down. A stable node lingers until get_ksm_page() notices that the page it references no longer references it: but the page is not necessarily freed as soon as expected, particularly when swapcache. Fix this with a pass through the old stable tree, applying get_ksm_page() to each of the remaining nodes (most found stale and removed immediately), with forced removal of any left over. Unless the page is still mapped: I've not seen that case, it shouldn't occur, but better to WARN_ON_ONCE and EBUSY than BUG. 2. __ksm_enter() has a nice little optimization, to insert the new mm just behind ksmd's cursor, so there's a full pass for it to stabilize (or be removed) before ksmd addresses it. Nice when ksmd is running, but not so nice when we're trying to unmerge all mms: we were missing those mms forked and inserted behind the unmerge cursor. Easily fixed by inserting at the end when KSM_RUN_UNMERGE. 3. It is possible for a KSM page to be faulted back from swapcache into an mm, just after unmerge_and_remove_all_rmap_items() scanned past it. Fix this by copying on fault when KSM_RUN_UNMERGE: but that is private to ksm.c, so dissolve the distinction between ksm_might_need_to_copy() and ksm_does_need_to_copy(), doing it all in the one call into ksm.c. A long outstanding, unrelated bugfix sneaks in with that third fix: ksm_does_need_to_copy() would copy from a !PageUptodate page (implying I/O error when read in from swap) to a page which it then marks Uptodate. Fix this case by not copying, letting do_swap_page() discover the error. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Petr Holasek <pholasek@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Izik Eidus <izik.eidus@ravellosystems.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Acked-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 00:35:08 +00:00
return page;
ksm: let shared pages be swappable Initial implementation for swapping out KSM's shared pages: add page_referenced_ksm() and try_to_unmap_ksm(), which rmap.c calls when faced with a PageKsm page. Most of what's needed can be got from the rmap_items listed from the stable_node of the ksm page, without discovering the actual vma: so in this patch just fake up a struct vma for page_referenced_one() or try_to_unmap_one(), then refine that in the next patch. Add VM_NONLINEAR to ksm_madvise()'s list of exclusions: it has always been implicit there (being only set with VM_SHARED, already excluded), but let's make it explicit, to help justify the lack of nonlinear unmap. Rely on the page lock to protect against concurrent modifications to that page's node of the stable tree. The awkward part is not swapout but swapin: do_swap_page() and page_add_anon_rmap() now have to allow for new possibilities - perhaps a ksm page still in swapcache, perhaps a swapcache page associated with one location in one anon_vma now needed for another location or anon_vma. (And the vma might even be no longer VM_MERGEABLE when that happens.) ksm_might_need_to_copy() checks for that case, and supplies a duplicate page when necessary, simply leaving it to a subsequent pass of ksmd to rediscover the identity and merge them back into one ksm page. Disappointingly primitive: but the alternative would have to accumulate unswappable info about the swapped out ksm pages, limiting swappability. Remove page_add_ksm_rmap(): page_add_anon_rmap() now has to allow for the particular case it was handling, so just use it instead. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Izik Eidus <ieidus@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Chris Wright <chrisw@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:59:24 +00:00
}
static inline void rmap_walk_ksm(struct folio *folio,
mm: don't be stuck to rmap lock on reclaim path The rmap locks(i_mmap_rwsem and anon_vma->root->rwsem) could be contended under memory pressure if processes keep working on their vmas(e.g., fork, mmap, munmap). It makes reclaim path stuck. In our real workload traces, we see kswapd is waiting the lock for 300ms+(worst case, a sec) and it makes other processes entering direct reclaim, which were also stuck on the lock. This patch makes lru aging path try_lock mode like shink_page_list so the reclaim context will keep working with next lru pages without being stuck. if it found the rmap lock contended, it rotates the page back to head of lru in both active/inactive lrus to make them consistent behavior, which is basic starting point rather than adding more heristic. Since this patch introduces a new "contended" field as out-param along with try_lock in-param in rmap_walk_control, it's not immutable any longer if the try_lock is set so remove const keywords on rmap related functions. Since rmap walking is already expensive operation, I doubt the const would help sizable benefit( And we didn't have it until 5.17). In a heavy app workload in Android, trace shows following statistics. It almost removes rmap lock contention from reclaim path. Martin Liu reported: Before: max_dur(ms) min_dur(ms) max-min(dur)ms avg_dur(ms) sum_dur(ms) count blocked_function 1632 0 1631 151.542173 31672 209 page_lock_anon_vma_read 601 0 601 145.544681 28817 198 rmap_walk_file After: max_dur(ms) min_dur(ms) max-min(dur)ms avg_dur(ms) sum_dur(ms) count blocked_function NaN NaN NaN NaN NaN 0.0 NaN 0 0 0 0.127645 1 12 rmap_walk_file [minchan@kernel.org: add comment, per Matthew] Link: https://lkml.kernel.org/r/YnNqeB5tUf6LZ57b@google.com Link: https://lkml.kernel.org/r/20220510215423.164547-1-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: John Dias <joaodias@google.com> Cc: Tim Murray <timmurray@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Martin Liu <liumartin@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-19 21:08:54 +00:00
struct rmap_walk_control *rwc)
ksm: rmap_walk to remove_migation_ptes A side-effect of making ksm pages swappable is that they have to be placed on the LRUs: which then exposes them to isolate_lru_page() and hence to page migration. Add rmap_walk() for remove_migration_ptes() to use: rmap_walk_anon() and rmap_walk_file() in rmap.c, but rmap_walk_ksm() in ksm.c. Perhaps some consolidation with existing code is possible, but don't attempt that yet (try_to_unmap needs to handle nonlinears, but migration pte removal does not). rmap_walk() is sadly less general than it appears: rmap_walk_anon(), like remove_anon_migration_ptes() which it replaces, avoids calling page_lock_anon_vma(), because that includes a page_mapped() test which fails when all migration ptes are in place. That was valid when NUMA page migration was introduced (holding mmap_sem provided the missing guarantee that anon_vma's slab had not already been destroyed), but I believe not valid in the memory hotremove case added since. For now do the same as before, and consider the best way to fix that unlikely race later on. When fixed, we can probably use rmap_walk() on hwpoisoned ksm pages too: for now, they remain among hwpoison's various exceptions (its PageKsm test comes before the page is locked, but its page_lock_anon_vma fails safely if an anon gets upgraded). Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Izik Eidus <ieidus@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Chris Wright <chrisw@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:59:31 +00:00
{
}
static inline void folio_migrate_ksm(struct folio *newfolio, struct folio *old)
ksm: rmap_walk to remove_migation_ptes A side-effect of making ksm pages swappable is that they have to be placed on the LRUs: which then exposes them to isolate_lru_page() and hence to page migration. Add rmap_walk() for remove_migration_ptes() to use: rmap_walk_anon() and rmap_walk_file() in rmap.c, but rmap_walk_ksm() in ksm.c. Perhaps some consolidation with existing code is possible, but don't attempt that yet (try_to_unmap needs to handle nonlinears, but migration pte removal does not). rmap_walk() is sadly less general than it appears: rmap_walk_anon(), like remove_anon_migration_ptes() which it replaces, avoids calling page_lock_anon_vma(), because that includes a page_mapped() test which fails when all migration ptes are in place. That was valid when NUMA page migration was introduced (holding mmap_sem provided the missing guarantee that anon_vma's slab had not already been destroyed), but I believe not valid in the memory hotremove case added since. For now do the same as before, and consider the best way to fix that unlikely race later on. When fixed, we can probably use rmap_walk() on hwpoisoned ksm pages too: for now, they remain among hwpoison's various exceptions (its PageKsm test comes before the page is locked, but its page_lock_anon_vma fails safely if an anon gets upgraded). Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Izik Eidus <ieidus@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Chris Wright <chrisw@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:59:31 +00:00
{
}
#endif /* CONFIG_MMU */
ksm: the mm interface to ksm This patch presents the mm interface to a dummy version of ksm.c, for better scrutiny of that interface: the real ksm.c follows later. When CONFIG_KSM is not set, madvise(2) reject MADV_MERGEABLE and MADV_UNMERGEABLE with EINVAL, since that seems more helpful than pretending that they can be serviced. But when CONFIG_KSM=y, accept them even if KSM is not currently running, and even on areas which KSM will not touch (e.g. hugetlb or shared file or special driver mappings). Like other madvices, report ENOMEM despite success if any area in the range is unmapped, and use EAGAIN to report out of memory. Define vma flag VM_MERGEABLE to identify an area on which KSM may try merging pages: leave it to ksm_madvise() to decide whether to set it. Define mm flag MMF_VM_MERGEABLE to identify an mm which might contain VM_MERGEABLE areas, to minimize callouts when forking or exiting. Based upon earlier patches by Chris Wright and Izik Eidus. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Chris Wright <chrisw@redhat.com> Signed-off-by: Izik Eidus <ieidus@redhat.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Avi Kivity <avi@redhat.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 00:01:57 +00:00
#endif /* !CONFIG_KSM */
ksm: let shared pages be swappable Initial implementation for swapping out KSM's shared pages: add page_referenced_ksm() and try_to_unmap_ksm(), which rmap.c calls when faced with a PageKsm page. Most of what's needed can be got from the rmap_items listed from the stable_node of the ksm page, without discovering the actual vma: so in this patch just fake up a struct vma for page_referenced_one() or try_to_unmap_one(), then refine that in the next patch. Add VM_NONLINEAR to ksm_madvise()'s list of exclusions: it has always been implicit there (being only set with VM_SHARED, already excluded), but let's make it explicit, to help justify the lack of nonlinear unmap. Rely on the page lock to protect against concurrent modifications to that page's node of the stable tree. The awkward part is not swapout but swapin: do_swap_page() and page_add_anon_rmap() now have to allow for new possibilities - perhaps a ksm page still in swapcache, perhaps a swapcache page associated with one location in one anon_vma now needed for another location or anon_vma. (And the vma might even be no longer VM_MERGEABLE when that happens.) ksm_might_need_to_copy() checks for that case, and supplies a duplicate page when necessary, simply leaving it to a subsequent pass of ksmd to rediscover the identity and merge them back into one ksm page. Disappointingly primitive: but the alternative would have to accumulate unswappable info about the swapped out ksm pages, limiting swappability. Remove page_add_ksm_rmap(): page_add_anon_rmap() now has to allow for the particular case it was handling, so just use it instead. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Izik Eidus <ieidus@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Chris Wright <chrisw@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:59:24 +00:00
#endif /* __LINUX_KSM_H */