License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
|
|
|
/* SPDX-License-Identifier: GPL-2.0 */
|
2008-04-03 00:22:53 +00:00
|
|
|
#ifndef __LINUX_MROUTE6_H
|
|
|
|
|
#define __LINUX_MROUTE6_H
|
|
|
|
|
|
|
|
|
|
|
2008-08-29 21:37:23 +00:00
|
|
|
#include <linux/pim.h>
|
2008-04-03 00:22:53 +00:00
|
|
|
#include <linux/skbuff.h> /* for struct sk_buff_head */
|
2008-12-11 00:07:08 +00:00
|
|
|
#include <net/net_namespace.h>
|
2012-10-13 09:46:48 +00:00
|
|
|
#include <uapi/linux/mroute6.h>
|
2018-02-28 21:29:29 +00:00
|
|
|
#include <linux/mroute_base.h>
|
2020-07-23 06:08:59 +00:00
|
|
|
#include <linux/sockptr.h>
|
2018-03-26 12:01:35 +00:00
|
|
|
#include <net/fib_rules.h>
|
2008-04-03 00:22:53 +00:00
|
|
|
|
|
|
|
|
#ifdef CONFIG_IPV6_MROUTE
|
|
|
|
|
static inline int ip6_mroute_opt(int opt)
|
|
|
|
|
{
|
2013-01-21 06:00:25 +00:00
|
|
|
return (opt >= MRT6_BASE) && (opt <= MRT6_MAX);
|
2008-04-03 00:22:53 +00:00
|
|
|
}
|
|
|
|
|
#else
|
|
|
|
|
static inline int ip6_mroute_opt(int opt)
|
|
|
|
|
{
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
struct sock;
|
|
|
|
|
|
2008-07-03 07:51:22 +00:00
|
|
|
#ifdef CONFIG_IPV6_MROUTE
|
2020-07-23 06:08:59 +00:00
|
|
|
extern int ip6_mroute_setsockopt(struct sock *, int, sockptr_t, unsigned int);
|
2022-09-02 00:28:53 +00:00
|
|
|
extern int ip6_mroute_getsockopt(struct sock *, int, sockptr_t, sockptr_t);
|
2008-04-03 00:22:53 +00:00
|
|
|
extern int ip6_mr_input(struct sk_buff *skb);
|
2011-02-04 01:59:32 +00:00
|
|
|
extern int ip6mr_compat_ioctl(struct sock *sk, unsigned int cmd, void __user *arg);
|
2008-07-03 04:13:30 +00:00
|
|
|
extern int ip6_mr_init(void);
|
|
|
|
|
extern void ip6_mr_cleanup(void);
|
net: ioctl: Use kernel memory on protocol ioctl callbacks
Most of the ioctls to net protocols operates directly on userspace
argument (arg). Usually doing get_user()/put_user() directly in the
ioctl callback. This is not flexible, because it is hard to reuse these
functions without passing userspace buffers.
Change the "struct proto" ioctls to avoid touching userspace memory and
operate on kernel buffers, i.e., all protocol's ioctl callbacks is
adapted to operate on a kernel memory other than on userspace (so, no
more {put,get}_user() and friends being called in the ioctl callback).
This changes the "struct proto" ioctl format in the following way:
int (*ioctl)(struct sock *sk, int cmd,
- unsigned long arg);
+ int *karg);
(Important to say that this patch does not touch the "struct proto_ops"
protocols)
So, the "karg" argument, which is passed to the ioctl callback, is a
pointer allocated to kernel space memory (inside a function wrapper).
This buffer (karg) may contain input argument (copied from userspace in
a prep function) and it might return a value/buffer, which is copied
back to userspace if necessary. There is not one-size-fits-all format
(that is I am using 'may' above), but basically, there are three type of
ioctls:
1) Do not read from userspace, returns a result to userspace
2) Read an input parameter from userspace, and does not return anything
to userspace
3) Read an input from userspace, and return a buffer to userspace.
The default case (1) (where no input parameter is given, and an "int" is
returned to userspace) encompasses more than 90% of the cases, but there
are two other exceptions. Here is a list of exceptions:
* Protocol RAW:
* cmd = SIOCGETVIFCNT:
* input and output = struct sioc_vif_req
* cmd = SIOCGETSGCNT
* input and output = struct sioc_sg_req
* Explanation: for the SIOCGETVIFCNT case, userspace passes the input
argument, which is struct sioc_vif_req. Then the callback populates
the struct, which is copied back to userspace.
* Protocol RAW6:
* cmd = SIOCGETMIFCNT_IN6
* input and output = struct sioc_mif_req6
* cmd = SIOCGETSGCNT_IN6
* input and output = struct sioc_sg_req6
* Protocol PHONET:
* cmd == SIOCPNADDRESOURCE | SIOCPNDELRESOURCE
* input int (4 bytes)
* Nothing is copied back to userspace.
For the exception cases, functions sock_sk_ioctl_inout() will
copy the userspace input, and copy it back to kernel space.
The wrapper that prepare the buffer and put the buffer back to user is
sk_ioctl(), so, instead of calling sk->sk_prot->ioctl(), the callee now
calls sk_ioctl(), which will handle all cases.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230609152800.830401-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-09 15:27:42 +00:00
|
|
|
int ip6mr_ioctl(struct sock *sk, int cmd, void *arg);
|
2008-07-03 07:51:22 +00:00
|
|
|
#else
|
2020-07-23 06:08:59 +00:00
|
|
|
static inline int ip6_mroute_setsockopt(struct sock *sock, int optname,
|
|
|
|
|
sockptr_t optval, unsigned int optlen)
|
2008-07-03 07:51:22 +00:00
|
|
|
{
|
|
|
|
|
return -ENOPROTOOPT;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static inline
|
|
|
|
|
int ip6_mroute_getsockopt(struct sock *sock,
|
2022-09-02 00:28:53 +00:00
|
|
|
int optname, sockptr_t optval, sockptr_t optlen)
|
2008-07-03 07:51:22 +00:00
|
|
|
{
|
|
|
|
|
return -ENOPROTOOPT;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static inline
|
net: ioctl: Use kernel memory on protocol ioctl callbacks
Most of the ioctls to net protocols operates directly on userspace
argument (arg). Usually doing get_user()/put_user() directly in the
ioctl callback. This is not flexible, because it is hard to reuse these
functions without passing userspace buffers.
Change the "struct proto" ioctls to avoid touching userspace memory and
operate on kernel buffers, i.e., all protocol's ioctl callbacks is
adapted to operate on a kernel memory other than on userspace (so, no
more {put,get}_user() and friends being called in the ioctl callback).
This changes the "struct proto" ioctl format in the following way:
int (*ioctl)(struct sock *sk, int cmd,
- unsigned long arg);
+ int *karg);
(Important to say that this patch does not touch the "struct proto_ops"
protocols)
So, the "karg" argument, which is passed to the ioctl callback, is a
pointer allocated to kernel space memory (inside a function wrapper).
This buffer (karg) may contain input argument (copied from userspace in
a prep function) and it might return a value/buffer, which is copied
back to userspace if necessary. There is not one-size-fits-all format
(that is I am using 'may' above), but basically, there are three type of
ioctls:
1) Do not read from userspace, returns a result to userspace
2) Read an input parameter from userspace, and does not return anything
to userspace
3) Read an input from userspace, and return a buffer to userspace.
The default case (1) (where no input parameter is given, and an "int" is
returned to userspace) encompasses more than 90% of the cases, but there
are two other exceptions. Here is a list of exceptions:
* Protocol RAW:
* cmd = SIOCGETVIFCNT:
* input and output = struct sioc_vif_req
* cmd = SIOCGETSGCNT
* input and output = struct sioc_sg_req
* Explanation: for the SIOCGETVIFCNT case, userspace passes the input
argument, which is struct sioc_vif_req. Then the callback populates
the struct, which is copied back to userspace.
* Protocol RAW6:
* cmd = SIOCGETMIFCNT_IN6
* input and output = struct sioc_mif_req6
* cmd = SIOCGETSGCNT_IN6
* input and output = struct sioc_sg_req6
* Protocol PHONET:
* cmd == SIOCPNADDRESOURCE | SIOCPNDELRESOURCE
* input int (4 bytes)
* Nothing is copied back to userspace.
For the exception cases, functions sock_sk_ioctl_inout() will
copy the userspace input, and copy it back to kernel space.
The wrapper that prepare the buffer and put the buffer back to user is
sk_ioctl(), so, instead of calling sk->sk_prot->ioctl(), the callee now
calls sk_ioctl(), which will handle all cases.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230609152800.830401-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-09 15:27:42 +00:00
|
|
|
int ip6mr_ioctl(struct sock *sk, int cmd, void *arg)
|
2008-07-03 07:51:22 +00:00
|
|
|
{
|
|
|
|
|
return -ENOIOCTLCMD;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static inline int ip6_mr_init(void)
|
|
|
|
|
{
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static inline void ip6_mr_cleanup(void)
|
|
|
|
|
{
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
#endif
|
2008-04-03 00:22:53 +00:00
|
|
|
|
2018-03-26 12:01:35 +00:00
|
|
|
#ifdef CONFIG_IPV6_MROUTE_MULTIPLE_TABLES
|
|
|
|
|
bool ip6mr_rule_default(const struct fib_rule *rule);
|
|
|
|
|
#else
|
|
|
|
|
static inline bool ip6mr_rule_default(const struct fib_rule *rule)
|
|
|
|
|
{
|
|
|
|
|
return true;
|
|
|
|
|
}
|
|
|
|
|
#endif
|
|
|
|
|
|
2008-04-03 00:22:53 +00:00
|
|
|
#define VIFF_STATIC 0x8000
|
|
|
|
|
|
2018-02-28 21:29:31 +00:00
|
|
|
struct mfc6_cache_cmp_arg {
|
|
|
|
|
struct in6_addr mf6c_mcastgrp;
|
|
|
|
|
struct in6_addr mf6c_origin;
|
|
|
|
|
};
|
|
|
|
|
|
2009-11-04 17:50:58 +00:00
|
|
|
struct mfc6_cache {
|
2018-02-28 21:29:34 +00:00
|
|
|
struct mr_mfc _c;
|
2018-02-28 21:29:31 +00:00
|
|
|
union {
|
|
|
|
|
struct {
|
|
|
|
|
struct in6_addr mf6c_mcastgrp;
|
|
|
|
|
struct in6_addr mf6c_origin;
|
|
|
|
|
};
|
|
|
|
|
struct mfc6_cache_cmp_arg cmparg;
|
|
|
|
|
};
|
2008-04-03 00:22:53 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
#define MFC_ASSERT_THRESH (3*HZ) /* Maximal freq. of asserts */
|
|
|
|
|
|
|
|
|
|
struct rtmsg;
|
2008-12-11 00:30:15 +00:00
|
|
|
extern int ip6mr_get_route(struct net *net, struct sk_buff *skb,
|
2017-01-17 23:51:07 +00:00
|
|
|
struct rtmsg *rtm, u32 portid);
|
2008-04-03 00:22:53 +00:00
|
|
|
|
|
|
|
|
#ifdef CONFIG_IPV6_MROUTE
|
2018-02-28 21:29:30 +00:00
|
|
|
bool mroute6_is_socket(struct net *net, struct sk_buff *skb);
|
2008-04-03 00:22:53 +00:00
|
|
|
extern int ip6mr_sk_done(struct sock *sk);
|
net: ioctl: Use kernel memory on protocol ioctl callbacks
Most of the ioctls to net protocols operates directly on userspace
argument (arg). Usually doing get_user()/put_user() directly in the
ioctl callback. This is not flexible, because it is hard to reuse these
functions without passing userspace buffers.
Change the "struct proto" ioctls to avoid touching userspace memory and
operate on kernel buffers, i.e., all protocol's ioctl callbacks is
adapted to operate on a kernel memory other than on userspace (so, no
more {put,get}_user() and friends being called in the ioctl callback).
This changes the "struct proto" ioctl format in the following way:
int (*ioctl)(struct sock *sk, int cmd,
- unsigned long arg);
+ int *karg);
(Important to say that this patch does not touch the "struct proto_ops"
protocols)
So, the "karg" argument, which is passed to the ioctl callback, is a
pointer allocated to kernel space memory (inside a function wrapper).
This buffer (karg) may contain input argument (copied from userspace in
a prep function) and it might return a value/buffer, which is copied
back to userspace if necessary. There is not one-size-fits-all format
(that is I am using 'may' above), but basically, there are three type of
ioctls:
1) Do not read from userspace, returns a result to userspace
2) Read an input parameter from userspace, and does not return anything
to userspace
3) Read an input from userspace, and return a buffer to userspace.
The default case (1) (where no input parameter is given, and an "int" is
returned to userspace) encompasses more than 90% of the cases, but there
are two other exceptions. Here is a list of exceptions:
* Protocol RAW:
* cmd = SIOCGETVIFCNT:
* input and output = struct sioc_vif_req
* cmd = SIOCGETSGCNT
* input and output = struct sioc_sg_req
* Explanation: for the SIOCGETVIFCNT case, userspace passes the input
argument, which is struct sioc_vif_req. Then the callback populates
the struct, which is copied back to userspace.
* Protocol RAW6:
* cmd = SIOCGETMIFCNT_IN6
* input and output = struct sioc_mif_req6
* cmd = SIOCGETSGCNT_IN6
* input and output = struct sioc_sg_req6
* Protocol PHONET:
* cmd == SIOCPNADDRESOURCE | SIOCPNDELRESOURCE
* input int (4 bytes)
* Nothing is copied back to userspace.
For the exception cases, functions sock_sk_ioctl_inout() will
copy the userspace input, and copy it back to kernel space.
The wrapper that prepare the buffer and put the buffer back to user is
sk_ioctl(), so, instead of calling sk->sk_prot->ioctl(), the callee now
calls sk_ioctl(), which will handle all cases.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230609152800.830401-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-09 15:27:42 +00:00
|
|
|
static inline int ip6mr_sk_ioctl(struct sock *sk, unsigned int cmd,
|
|
|
|
|
void __user *arg)
|
|
|
|
|
{
|
|
|
|
|
switch (cmd) {
|
|
|
|
|
/* These userspace buffers will be consumed by ip6mr_ioctl() */
|
|
|
|
|
case SIOCGETMIFCNT_IN6: {
|
|
|
|
|
struct sioc_mif_req6 buffer;
|
|
|
|
|
|
|
|
|
|
return sock_ioctl_inout(sk, cmd, arg, &buffer,
|
2023-06-19 07:27:40 +00:00
|
|
|
sizeof(buffer));
|
net: ioctl: Use kernel memory on protocol ioctl callbacks
Most of the ioctls to net protocols operates directly on userspace
argument (arg). Usually doing get_user()/put_user() directly in the
ioctl callback. This is not flexible, because it is hard to reuse these
functions without passing userspace buffers.
Change the "struct proto" ioctls to avoid touching userspace memory and
operate on kernel buffers, i.e., all protocol's ioctl callbacks is
adapted to operate on a kernel memory other than on userspace (so, no
more {put,get}_user() and friends being called in the ioctl callback).
This changes the "struct proto" ioctl format in the following way:
int (*ioctl)(struct sock *sk, int cmd,
- unsigned long arg);
+ int *karg);
(Important to say that this patch does not touch the "struct proto_ops"
protocols)
So, the "karg" argument, which is passed to the ioctl callback, is a
pointer allocated to kernel space memory (inside a function wrapper).
This buffer (karg) may contain input argument (copied from userspace in
a prep function) and it might return a value/buffer, which is copied
back to userspace if necessary. There is not one-size-fits-all format
(that is I am using 'may' above), but basically, there are three type of
ioctls:
1) Do not read from userspace, returns a result to userspace
2) Read an input parameter from userspace, and does not return anything
to userspace
3) Read an input from userspace, and return a buffer to userspace.
The default case (1) (where no input parameter is given, and an "int" is
returned to userspace) encompasses more than 90% of the cases, but there
are two other exceptions. Here is a list of exceptions:
* Protocol RAW:
* cmd = SIOCGETVIFCNT:
* input and output = struct sioc_vif_req
* cmd = SIOCGETSGCNT
* input and output = struct sioc_sg_req
* Explanation: for the SIOCGETVIFCNT case, userspace passes the input
argument, which is struct sioc_vif_req. Then the callback populates
the struct, which is copied back to userspace.
* Protocol RAW6:
* cmd = SIOCGETMIFCNT_IN6
* input and output = struct sioc_mif_req6
* cmd = SIOCGETSGCNT_IN6
* input and output = struct sioc_sg_req6
* Protocol PHONET:
* cmd == SIOCPNADDRESOURCE | SIOCPNDELRESOURCE
* input int (4 bytes)
* Nothing is copied back to userspace.
For the exception cases, functions sock_sk_ioctl_inout() will
copy the userspace input, and copy it back to kernel space.
The wrapper that prepare the buffer and put the buffer back to user is
sk_ioctl(), so, instead of calling sk->sk_prot->ioctl(), the callee now
calls sk_ioctl(), which will handle all cases.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230609152800.830401-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-09 15:27:42 +00:00
|
|
|
}
|
|
|
|
|
case SIOCGETSGCNT_IN6: {
|
2023-06-19 07:27:40 +00:00
|
|
|
struct sioc_sg_req6 buffer;
|
net: ioctl: Use kernel memory on protocol ioctl callbacks
Most of the ioctls to net protocols operates directly on userspace
argument (arg). Usually doing get_user()/put_user() directly in the
ioctl callback. This is not flexible, because it is hard to reuse these
functions without passing userspace buffers.
Change the "struct proto" ioctls to avoid touching userspace memory and
operate on kernel buffers, i.e., all protocol's ioctl callbacks is
adapted to operate on a kernel memory other than on userspace (so, no
more {put,get}_user() and friends being called in the ioctl callback).
This changes the "struct proto" ioctl format in the following way:
int (*ioctl)(struct sock *sk, int cmd,
- unsigned long arg);
+ int *karg);
(Important to say that this patch does not touch the "struct proto_ops"
protocols)
So, the "karg" argument, which is passed to the ioctl callback, is a
pointer allocated to kernel space memory (inside a function wrapper).
This buffer (karg) may contain input argument (copied from userspace in
a prep function) and it might return a value/buffer, which is copied
back to userspace if necessary. There is not one-size-fits-all format
(that is I am using 'may' above), but basically, there are three type of
ioctls:
1) Do not read from userspace, returns a result to userspace
2) Read an input parameter from userspace, and does not return anything
to userspace
3) Read an input from userspace, and return a buffer to userspace.
The default case (1) (where no input parameter is given, and an "int" is
returned to userspace) encompasses more than 90% of the cases, but there
are two other exceptions. Here is a list of exceptions:
* Protocol RAW:
* cmd = SIOCGETVIFCNT:
* input and output = struct sioc_vif_req
* cmd = SIOCGETSGCNT
* input and output = struct sioc_sg_req
* Explanation: for the SIOCGETVIFCNT case, userspace passes the input
argument, which is struct sioc_vif_req. Then the callback populates
the struct, which is copied back to userspace.
* Protocol RAW6:
* cmd = SIOCGETMIFCNT_IN6
* input and output = struct sioc_mif_req6
* cmd = SIOCGETSGCNT_IN6
* input and output = struct sioc_sg_req6
* Protocol PHONET:
* cmd == SIOCPNADDRESOURCE | SIOCPNDELRESOURCE
* input int (4 bytes)
* Nothing is copied back to userspace.
For the exception cases, functions sock_sk_ioctl_inout() will
copy the userspace input, and copy it back to kernel space.
The wrapper that prepare the buffer and put the buffer back to user is
sk_ioctl(), so, instead of calling sk->sk_prot->ioctl(), the callee now
calls sk_ioctl(), which will handle all cases.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230609152800.830401-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-09 15:27:42 +00:00
|
|
|
|
|
|
|
|
return sock_ioctl_inout(sk, cmd, arg, &buffer,
|
2023-06-19 07:27:40 +00:00
|
|
|
sizeof(buffer));
|
net: ioctl: Use kernel memory on protocol ioctl callbacks
Most of the ioctls to net protocols operates directly on userspace
argument (arg). Usually doing get_user()/put_user() directly in the
ioctl callback. This is not flexible, because it is hard to reuse these
functions without passing userspace buffers.
Change the "struct proto" ioctls to avoid touching userspace memory and
operate on kernel buffers, i.e., all protocol's ioctl callbacks is
adapted to operate on a kernel memory other than on userspace (so, no
more {put,get}_user() and friends being called in the ioctl callback).
This changes the "struct proto" ioctl format in the following way:
int (*ioctl)(struct sock *sk, int cmd,
- unsigned long arg);
+ int *karg);
(Important to say that this patch does not touch the "struct proto_ops"
protocols)
So, the "karg" argument, which is passed to the ioctl callback, is a
pointer allocated to kernel space memory (inside a function wrapper).
This buffer (karg) may contain input argument (copied from userspace in
a prep function) and it might return a value/buffer, which is copied
back to userspace if necessary. There is not one-size-fits-all format
(that is I am using 'may' above), but basically, there are three type of
ioctls:
1) Do not read from userspace, returns a result to userspace
2) Read an input parameter from userspace, and does not return anything
to userspace
3) Read an input from userspace, and return a buffer to userspace.
The default case (1) (where no input parameter is given, and an "int" is
returned to userspace) encompasses more than 90% of the cases, but there
are two other exceptions. Here is a list of exceptions:
* Protocol RAW:
* cmd = SIOCGETVIFCNT:
* input and output = struct sioc_vif_req
* cmd = SIOCGETSGCNT
* input and output = struct sioc_sg_req
* Explanation: for the SIOCGETVIFCNT case, userspace passes the input
argument, which is struct sioc_vif_req. Then the callback populates
the struct, which is copied back to userspace.
* Protocol RAW6:
* cmd = SIOCGETMIFCNT_IN6
* input and output = struct sioc_mif_req6
* cmd = SIOCGETSGCNT_IN6
* input and output = struct sioc_sg_req6
* Protocol PHONET:
* cmd == SIOCPNADDRESOURCE | SIOCPNDELRESOURCE
* input int (4 bytes)
* Nothing is copied back to userspace.
For the exception cases, functions sock_sk_ioctl_inout() will
copy the userspace input, and copy it back to kernel space.
The wrapper that prepare the buffer and put the buffer back to user is
sk_ioctl(), so, instead of calling sk->sk_prot->ioctl(), the callee now
calls sk_ioctl(), which will handle all cases.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230609152800.830401-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-09 15:27:42 +00:00
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return 1;
|
|
|
|
|
}
|
2008-04-03 00:22:53 +00:00
|
|
|
#else
|
2018-02-28 21:29:30 +00:00
|
|
|
static inline bool mroute6_is_socket(struct net *net, struct sk_buff *skb)
|
ipv6: ip6mr: support multiple tables
This patch adds support for multiple independant multicast routing instances,
named "tables".
Userspace multicast routing daemons can bind to a specific table instance by
issuing a setsockopt call using a new option MRT6_TABLE. The table number is
stored in the raw socket data and affects all following ip6mr setsockopt(),
getsockopt() and ioctl() calls. By default, a single table (RT6_TABLE_DFLT)
is created with a default routing rule pointing to it. Newly created pim6reg
devices have the table number appended ("pim6regX"), with the exception of
devices created in the default table, which are named just "pim6reg" for
compatibility reasons.
Packets are directed to a specific table instance using routing rules,
similar to how regular routing rules work. Currently iif, oif and mark
are supported as keys, source and destination addresses could be supported
additionally.
Example usage:
- bind pimd/xorp/... to a specific table:
uint32_t table = 123;
setsockopt(fd, SOL_IPV6, MRT6_TABLE, &table, sizeof(table));
- create routing rules directing packets to the new table:
# ip -6 mrule add iif eth0 lookup 123
# ip -6 mrule add oif eth0 lookup 123
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-05-11 12:40:55 +00:00
|
|
|
{
|
2018-02-28 21:29:30 +00:00
|
|
|
return false;
|
ipv6: ip6mr: support multiple tables
This patch adds support for multiple independant multicast routing instances,
named "tables".
Userspace multicast routing daemons can bind to a specific table instance by
issuing a setsockopt call using a new option MRT6_TABLE. The table number is
stored in the raw socket data and affects all following ip6mr setsockopt(),
getsockopt() and ioctl() calls. By default, a single table (RT6_TABLE_DFLT)
is created with a default routing rule pointing to it. Newly created pim6reg
devices have the table number appended ("pim6regX"), with the exception of
devices created in the default table, which are named just "pim6reg" for
compatibility reasons.
Packets are directed to a specific table instance using routing rules,
similar to how regular routing rules work. Currently iif, oif and mark
are supported as keys, source and destination addresses could be supported
additionally.
Example usage:
- bind pimd/xorp/... to a specific table:
uint32_t table = 123;
setsockopt(fd, SOL_IPV6, MRT6_TABLE, &table, sizeof(table));
- create routing rules directing packets to the new table:
# ip -6 mrule add iif eth0 lookup 123
# ip -6 mrule add oif eth0 lookup 123
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-05-11 12:40:55 +00:00
|
|
|
}
|
|
|
|
|
static inline int ip6mr_sk_done(struct sock *sk)
|
|
|
|
|
{
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
net: ioctl: Use kernel memory on protocol ioctl callbacks
Most of the ioctls to net protocols operates directly on userspace
argument (arg). Usually doing get_user()/put_user() directly in the
ioctl callback. This is not flexible, because it is hard to reuse these
functions without passing userspace buffers.
Change the "struct proto" ioctls to avoid touching userspace memory and
operate on kernel buffers, i.e., all protocol's ioctl callbacks is
adapted to operate on a kernel memory other than on userspace (so, no
more {put,get}_user() and friends being called in the ioctl callback).
This changes the "struct proto" ioctl format in the following way:
int (*ioctl)(struct sock *sk, int cmd,
- unsigned long arg);
+ int *karg);
(Important to say that this patch does not touch the "struct proto_ops"
protocols)
So, the "karg" argument, which is passed to the ioctl callback, is a
pointer allocated to kernel space memory (inside a function wrapper).
This buffer (karg) may contain input argument (copied from userspace in
a prep function) and it might return a value/buffer, which is copied
back to userspace if necessary. There is not one-size-fits-all format
(that is I am using 'may' above), but basically, there are three type of
ioctls:
1) Do not read from userspace, returns a result to userspace
2) Read an input parameter from userspace, and does not return anything
to userspace
3) Read an input from userspace, and return a buffer to userspace.
The default case (1) (where no input parameter is given, and an "int" is
returned to userspace) encompasses more than 90% of the cases, but there
are two other exceptions. Here is a list of exceptions:
* Protocol RAW:
* cmd = SIOCGETVIFCNT:
* input and output = struct sioc_vif_req
* cmd = SIOCGETSGCNT
* input and output = struct sioc_sg_req
* Explanation: for the SIOCGETVIFCNT case, userspace passes the input
argument, which is struct sioc_vif_req. Then the callback populates
the struct, which is copied back to userspace.
* Protocol RAW6:
* cmd = SIOCGETMIFCNT_IN6
* input and output = struct sioc_mif_req6
* cmd = SIOCGETSGCNT_IN6
* input and output = struct sioc_sg_req6
* Protocol PHONET:
* cmd == SIOCPNADDRESOURCE | SIOCPNDELRESOURCE
* input int (4 bytes)
* Nothing is copied back to userspace.
For the exception cases, functions sock_sk_ioctl_inout() will
copy the userspace input, and copy it back to kernel space.
The wrapper that prepare the buffer and put the buffer back to user is
sk_ioctl(), so, instead of calling sk->sk_prot->ioctl(), the callee now
calls sk_ioctl(), which will handle all cases.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230609152800.830401-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-09 15:27:42 +00:00
|
|
|
|
|
|
|
|
static inline int ip6mr_sk_ioctl(struct sock *sk, unsigned int cmd,
|
|
|
|
|
void __user *arg)
|
|
|
|
|
{
|
|
|
|
|
return 1;
|
|
|
|
|
}
|
2008-04-03 00:22:53 +00:00
|
|
|
#endif
|
|
|
|
|
#endif
|