linux-stable/drivers/serial/mrst_max3110.c

855 lines
19 KiB
C
Raw Normal View History

/*
* max3110.c - spi uart protocol driver for Maxim 3110 on Moorestown
*
* Copyright (C) Intel 2008 Feng Tang <feng.tang@intel.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*/
/*
* Note:
* 1. From Max3110 spec, the Rx FIFO has 8 words, while the Tx FIFO only has
* 1 word. If SPI master controller doesn't support sclk frequency change,
* then the char need be sent out one by one with some delay
*
* 2. Currently only RX availabe interrrupt is used, no need for waiting TXE
* interrupt for a low speed UART device
*/
#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/console.h>
#include <linux/sysrq.h>
#include <linux/platform_device.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
#include <linux/serial_reg.h>
#include <linux/kthread.h>
#include <linux/delay.h>
#include <asm/atomic.h>
#include <linux/spi/spi.h>
#include <linux/spi/dw_spi.h>
#include "mrst_max3110.h"
#define PR_FMT "mrst_max3110: "
struct uart_max3110 {
struct uart_port port;
struct spi_device *spi;
char *name;
wait_queue_head_t wq;
struct task_struct *main_thread;
struct task_struct *read_thread;
struct mutex thread_mutex;;
u32 baud;
u16 cur_conf;
u8 clock;
u8 parity, word_7bits;
atomic_t uart_tx_need;
/* console related */
struct circ_buf con_xmit;
atomic_t con_tx_need;
/* irq related */
u16 irq;
atomic_t irq_pending;
};
/* global data structure, may need be removed */
struct uart_max3110 *pmax;
static inline void receive_char(struct uart_max3110 *max, u8 ch);
static void receive_chars(struct uart_max3110 *max,
unsigned char *str, int len);
static int max3110_read_multi(struct uart_max3110 *max, int len, u8 *buf);
static void max3110_console_receive(struct uart_max3110 *max);
int max3110_write_then_read(struct uart_max3110 *max,
const u8 *txbuf, u8 *rxbuf, unsigned len, int always_fast)
{
struct spi_device *spi = max->spi;
struct spi_message message;
struct spi_transfer x;
int ret;
if (!txbuf || !rxbuf)
return -EINVAL;
spi_message_init(&message);
memset(&x, 0, sizeof x);
x.len = len;
x.tx_buf = txbuf;
x.rx_buf = rxbuf;
spi_message_add_tail(&x, &message);
if (always_fast)
x.speed_hz = 3125000;
else if (max->baud)
x.speed_hz = max->baud;
/* Do the i/o */
ret = spi_sync(spi, &message);
return ret;
}
/* Write a u16 to the device, and return one u16 read back */
int max3110_out(struct uart_max3110 *max, const u16 out)
{
u16 tmp;
int ret;
ret = max3110_write_then_read(max, (u8 *)&out, (u8 *)&tmp, 2, 1);
if (ret)
return ret;
/* If some valid data is read back */
if (tmp & MAX3110_READ_DATA_AVAILABLE)
receive_char(max, (tmp & 0xff));
return ret;
}
#define MAX_READ_LEN 20
/*
* This is usually used to read data from SPIC RX FIFO, which doesn't
* need any delay like flushing character out. It returns how many
* valide bytes are read back
*/
static int max3110_read_multi(struct uart_max3110 *max, int len, u8 *buf)
{
u16 out[MAX_READ_LEN], in[MAX_READ_LEN];
u8 *pbuf, valid_str[MAX_READ_LEN];
int i, j, bytelen;
if (len > MAX_READ_LEN) {
pr_err(PR_FMT "read len %d is too large\n", len);
return 0;
}
bytelen = len * 2;
memset(out, 0, bytelen);
memset(in, 0, bytelen);
if (max3110_write_then_read(max, (u8 *)out, (u8 *)in, bytelen, 1))
return 0;
/* If caller don't provide a buffer, then handle received char */
pbuf = buf ? buf : valid_str;
for (i = 0, j = 0; i < len; i++) {
if (in[i] & MAX3110_READ_DATA_AVAILABLE)
pbuf[j++] = (u8)(in[i] & 0xff);
}
if (j && (pbuf == valid_str))
receive_chars(max, valid_str, j);
return j;
}
static void serial_m3110_con_putchar(struct uart_port *port, int ch)
{
struct uart_max3110 *max =
container_of(port, struct uart_max3110, port);
struct circ_buf *xmit = &max->con_xmit;
if (uart_circ_chars_free(xmit)) {
xmit->buf[xmit->head] = (char)ch;
xmit->head = (xmit->head + 1) & (PAGE_SIZE - 1);
}
if (!atomic_read(&max->con_tx_need)) {
atomic_set(&max->con_tx_need, 1);
wake_up_process(max->main_thread);
}
}
/*
* Print a string to the serial port trying not to disturb
* any possible real use of the port...
*
* The console_lock must be held when we get here.
*/
static void serial_m3110_con_write(struct console *co,
const char *s, unsigned int count)
{
if (!pmax)
return;
uart_console_write(&pmax->port, s, count, serial_m3110_con_putchar);
}
static int __init
serial_m3110_con_setup(struct console *co, char *options)
{
struct uart_max3110 *max = pmax;
int baud = 115200;
int bits = 8;
int parity = 'n';
int flow = 'n';
pr_info(PR_FMT "setting up console\n");
if (!max) {
pr_err(PR_FMT "pmax is NULL, return");
return -ENODEV;
}
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
return uart_set_options(&max->port, co, baud, parity, bits, flow);
}
static struct tty_driver *serial_m3110_con_device(struct console *co,
int *index)
{
struct uart_driver *p = co->data;
*index = co->index;
return p->tty_driver;
}
static struct uart_driver serial_m3110_reg;
static struct console serial_m3110_console = {
.name = "ttyS",
.write = serial_m3110_con_write,
.device = serial_m3110_con_device,
.setup = serial_m3110_con_setup,
.flags = CON_PRINTBUFFER,
.index = -1,
.data = &serial_m3110_reg,
};
#define MRST_CONSOLE (&serial_m3110_console)
static unsigned int serial_m3110_tx_empty(struct uart_port *port)
{
return 1;
}
static void serial_m3110_stop_tx(struct uart_port *port)
{
return;
}
/* stop_rx will be called in spin_lock env */
static void serial_m3110_stop_rx(struct uart_port *port)
{
return;
}
#define WORDS_PER_XFER 128
static inline void send_circ_buf(struct uart_max3110 *max,
struct circ_buf *xmit)
{
int len, left = 0;
u16 obuf[WORDS_PER_XFER], ibuf[WORDS_PER_XFER];
u8 valid_str[WORDS_PER_XFER];
int i, j;
while (!uart_circ_empty(xmit)) {
left = uart_circ_chars_pending(xmit);
while (left) {
len = (left >= WORDS_PER_XFER) ? WORDS_PER_XFER : left;
memset(obuf, 0, len * 2);
memset(ibuf, 0, len * 2);
for (i = 0; i < len; i++) {
obuf[i] = (u8)xmit->buf[xmit->tail] | WD_TAG;
xmit->tail = (xmit->tail + 1) &
(UART_XMIT_SIZE - 1);
}
max3110_write_then_read(max, (u8 *)obuf,
(u8 *)ibuf, len * 2, 0);
for (i = 0, j = 0; i < len; i++) {
if (ibuf[i] & MAX3110_READ_DATA_AVAILABLE)
valid_str[j++] = (u8)(ibuf[i] & 0xff);
}
if (j)
receive_chars(max, valid_str, j);
max->port.icount.tx += len;
left -= len;
}
}
}
static void transmit_char(struct uart_max3110 *max)
{
struct uart_port *port = &max->port;
struct circ_buf *xmit = &port->state->xmit;
if (uart_circ_empty(xmit) || uart_tx_stopped(port))
return;
send_circ_buf(max, xmit);
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(port);
if (uart_circ_empty(xmit))
serial_m3110_stop_tx(port);
}
/* This will be called by uart_write() and tty_write, can't
* go to sleep */
static void serial_m3110_start_tx(struct uart_port *port)
{
struct uart_max3110 *max =
container_of(port, struct uart_max3110, port);
if (!atomic_read(&max->uart_tx_need)) {
atomic_set(&max->uart_tx_need, 1);
wake_up_process(max->main_thread);
}
}
static void receive_chars(struct uart_max3110 *max, unsigned char *str, int len)
{
struct uart_port *port = &max->port;
struct tty_struct *tty;
int usable;
/* If uart is not opened, just return */
if (!port->state)
return;
tty = port->state->port.tty;
if (!tty)
return; /* receive some char before the tty is opened */
while (len) {
usable = tty_buffer_request_room(tty, len);
if (usable) {
tty_insert_flip_string(tty, str, usable);
str += usable;
port->icount.rx += usable;
tty_flip_buffer_push(tty);
}
len -= usable;
}
}
static inline void receive_char(struct uart_max3110 *max, u8 ch)
{
receive_chars(max, &ch, 1);
}
static void max3110_console_receive(struct uart_max3110 *max)
{
int loop = 1, num, total = 0;
u8 recv_buf[512], *pbuf;
pbuf = recv_buf;
do {
num = max3110_read_multi(max, 8, pbuf);
if (num) {
loop = 10;
pbuf += num;
total += num;
if (total >= 500) {
receive_chars(max, recv_buf, total);
pbuf = recv_buf;
total = 0;
}
}
} while (--loop);
if (total)
receive_chars(max, recv_buf, total);
}
static int max3110_main_thread(void *_max)
{
struct uart_max3110 *max = _max;
wait_queue_head_t *wq = &max->wq;
int ret = 0;
struct circ_buf *xmit = &max->con_xmit;
init_waitqueue_head(wq);
pr_info(PR_FMT "start main thread\n");
do {
wait_event_interruptible(*wq, (atomic_read(&max->irq_pending) ||
atomic_read(&max->con_tx_need) ||
atomic_read(&max->uart_tx_need)) ||
kthread_should_stop());
mutex_lock(&max->thread_mutex);
#ifdef CONFIG_MRST_MAX3110_IRQ
if (atomic_read(&max->irq_pending)) {
max3110_console_receive(max);
atomic_set(&max->irq_pending, 0);
}
#endif
/* first handle console output */
if (atomic_read(&max->con_tx_need)) {
send_circ_buf(max, xmit);
atomic_set(&max->con_tx_need, 0);
}
/* handle uart output */
if (atomic_read(&max->uart_tx_need)) {
transmit_char(max);
atomic_set(&max->uart_tx_need, 0);
}
mutex_unlock(&max->thread_mutex);
} while (!kthread_should_stop());
return ret;
}
#ifdef CONFIG_MRST_MAX3110_IRQ
static irqreturn_t serial_m3110_irq(int irq, void *dev_id)
{
struct uart_max3110 *max = dev_id;
/* max3110's irq is a falling edge, not level triggered,
* so no need to disable the irq */
if (!atomic_read(&max->irq_pending)) {
atomic_inc(&max->irq_pending);
wake_up_process(max->main_thread);
}
return IRQ_HANDLED;
}
#else
/* if don't use RX IRQ, then need a thread to polling read */
static int max3110_read_thread(void *_max)
{
struct uart_max3110 *max = _max;
pr_info(PR_FMT "start read thread\n");
do {
mutex_lock(&max->thread_mutex);
max3110_console_receive(max);
mutex_unlock(&max->thread_mutex);
set_current_state(TASK_INTERRUPTIBLE);
schedule_timeout(HZ / 20);
} while (!kthread_should_stop());
return 0;
}
#endif
static int serial_m3110_startup(struct uart_port *port)
{
struct uart_max3110 *max =
container_of(port, struct uart_max3110, port);
u16 config = 0;
int ret = 0;
if (port->line != 0)
pr_err(PR_FMT "uart port startup failed\n");
/* firstly disable all IRQ and config it to 115200, 8n1 */
config = WC_TAG | WC_FIFO_ENABLE
| WC_1_STOPBITS
| WC_8BIT_WORD
| WC_BAUD_DR2;
ret = max3110_out(max, config);
/* as we use thread to handle tx/rx, need set low latency */
port->state->port.tty->low_latency = 1;
#ifdef CONFIG_MRST_MAX3110_IRQ
ret = request_irq(max->irq, serial_m3110_irq,
IRQ_TYPE_EDGE_FALLING, "max3110", max);
if (ret)
return ret;
/* enable RX IRQ only */
config |= WC_RXA_IRQ_ENABLE;
max3110_out(max, config);
#else
/* if IRQ is disabled, start a read thread for input data */
max->read_thread =
kthread_run(max3110_read_thread, max, "max3110_read");
#endif
max->cur_conf = config;
return 0;
}
static void serial_m3110_shutdown(struct uart_port *port)
{
struct uart_max3110 *max =
container_of(port, struct uart_max3110, port);
u16 config;
if (max->read_thread) {
kthread_stop(max->read_thread);
max->read_thread = NULL;
}
#ifdef CONFIG_MRST_MAX3110_IRQ
free_irq(max->irq, max);
#endif
/* Disable interrupts from this port */
config = WC_TAG | WC_SW_SHDI;
max3110_out(max, config);
}
static void serial_m3110_release_port(struct uart_port *port)
{
}
static int serial_m3110_request_port(struct uart_port *port)
{
return 0;
}
static void serial_m3110_config_port(struct uart_port *port, int flags)
{
/* give it fake type */
port->type = PORT_PXA;
}
static int
serial_m3110_verify_port(struct uart_port *port, struct serial_struct *ser)
{
/* we don't want the core code to modify any port params */
return -EINVAL;
}
static const char *serial_m3110_type(struct uart_port *port)
{
struct uart_max3110 *max =
container_of(port, struct uart_max3110, port);
return max->name;
}
static void
serial_m3110_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
{
struct uart_max3110 *max =
container_of(port, struct uart_max3110, port);
unsigned char cval;
unsigned int baud, parity = 0;
int clk_div = -1;
u16 new_conf = max->cur_conf;
switch (termios->c_cflag & CSIZE) {
case CS7:
cval = UART_LCR_WLEN7;
new_conf |= WC_7BIT_WORD;
break;
default:
case CS8:
cval = UART_LCR_WLEN8;
new_conf |= WC_8BIT_WORD;
break;
}
baud = uart_get_baud_rate(port, termios, old, 0, 230400);
/* first calc the div for 1.8MHZ clock case */
switch (baud) {
case 300:
clk_div = WC_BAUD_DR384;
break;
case 600:
clk_div = WC_BAUD_DR192;
break;
case 1200:
clk_div = WC_BAUD_DR96;
break;
case 2400:
clk_div = WC_BAUD_DR48;
break;
case 4800:
clk_div = WC_BAUD_DR24;
break;
case 9600:
clk_div = WC_BAUD_DR12;
break;
case 19200:
clk_div = WC_BAUD_DR6;
break;
case 38400:
clk_div = WC_BAUD_DR3;
break;
case 57600:
clk_div = WC_BAUD_DR2;
break;
case 115200:
clk_div = WC_BAUD_DR1;
break;
case 230400:
if (max->clock & MAX3110_HIGH_CLK)
break;
default:
/* pick the previous baud rate */
baud = max->baud;
clk_div = max->cur_conf & WC_BAUD_DIV_MASK;
tty_termios_encode_baud_rate(termios, baud, baud);
}
if (max->clock & MAX3110_HIGH_CLK) {
clk_div += 1;
/* high clk version max3110 doesn't support B300 */
if (baud == 300)
baud = 600;
if (baud == 230400)
clk_div = WC_BAUD_DR1;
tty_termios_encode_baud_rate(termios, baud, baud);
}
new_conf = (new_conf & ~WC_BAUD_DIV_MASK) | clk_div;
if (termios->c_cflag & CSTOPB)
new_conf |= WC_2_STOPBITS;
else
new_conf &= ~WC_2_STOPBITS;
if (termios->c_cflag & PARENB) {
new_conf |= WC_PARITY_ENABLE;
parity |= UART_LCR_PARITY;
} else
new_conf &= ~WC_PARITY_ENABLE;
if (!(termios->c_cflag & PARODD))
parity |= UART_LCR_EPAR;
max->parity = parity;
uart_update_timeout(port, termios->c_cflag, baud);
new_conf |= WC_TAG;
if (new_conf != max->cur_conf) {
max3110_out(max, new_conf);
max->cur_conf = new_conf;
max->baud = baud;
}
}
/* don't handle hw handshaking */
static unsigned int serial_m3110_get_mctrl(struct uart_port *port)
{
return TIOCM_DSR | TIOCM_CAR | TIOCM_DSR;
}
static void serial_m3110_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
}
static void serial_m3110_break_ctl(struct uart_port *port, int break_state)
{
}
static void serial_m3110_pm(struct uart_port *port, unsigned int state,
unsigned int oldstate)
{
}
static void serial_m3110_enable_ms(struct uart_port *port)
{
}
struct uart_ops serial_m3110_ops = {
.tx_empty = serial_m3110_tx_empty,
.set_mctrl = serial_m3110_set_mctrl,
.get_mctrl = serial_m3110_get_mctrl,
.stop_tx = serial_m3110_stop_tx,
.start_tx = serial_m3110_start_tx,
.stop_rx = serial_m3110_stop_rx,
.enable_ms = serial_m3110_enable_ms,
.break_ctl = serial_m3110_break_ctl,
.startup = serial_m3110_startup,
.shutdown = serial_m3110_shutdown,
.set_termios = serial_m3110_set_termios, /* must have */
.pm = serial_m3110_pm,
.type = serial_m3110_type,
.release_port = serial_m3110_release_port,
.request_port = serial_m3110_request_port,
.config_port = serial_m3110_config_port,
.verify_port = serial_m3110_verify_port,
};
static struct uart_driver serial_m3110_reg = {
.owner = THIS_MODULE,
.driver_name = "MRST serial",
.dev_name = "ttyS",
.major = TTY_MAJOR,
.minor = 64,
.nr = 1,
.cons = MRST_CONSOLE,
};
static int serial_m3110_suspend(struct spi_device *spi, pm_message_t state)
{
return 0;
}
static int serial_m3110_resume(struct spi_device *spi)
{
return 0;
}
static struct dw_spi_chip spi0_uart = {
.poll_mode = 1,
.enable_dma = 0,
.type = SPI_FRF_SPI,
};
static int serial_m3110_probe(struct spi_device *spi)
{
struct uart_max3110 *max;
int ret;
unsigned char *buffer;
u16 res;
max = kzalloc(sizeof(*max), GFP_KERNEL);
if (!max)
return -ENOMEM;
/* set spi info */
spi->mode = SPI_MODE_0;
spi->bits_per_word = 16;
max->clock = MAX3110_HIGH_CLK;
spi->controller_data = &spi0_uart;
spi_setup(spi);
max->port.type = PORT_PXA; /* need apply for a max3110 type */
max->port.fifosize = 2; /* only have 16b buffer */
max->port.ops = &serial_m3110_ops;
max->port.line = 0;
max->port.dev = &spi->dev;
max->port.uartclk = 115200;
max->spi = spi;
max->name = spi->modalias; /* use spi name as the name */
max->irq = (u16)spi->irq;
mutex_init(&max->thread_mutex);
max->word_7bits = 0;
max->parity = 0;
max->baud = 0;
max->cur_conf = 0;
atomic_set(&max->irq_pending, 0);
/* Check if reading configuration register returns something sane */
res = RC_TAG;
ret = max3110_write_then_read(max, (u8 *)&res, (u8 *)&res, 2, 0);
if (ret < 0 || res == 0 || res == 0xffff) {
printk(KERN_ERR "MAX3111 deemed not present (conf reg %04x)",
res);
ret = -ENODEV;
goto err_get_page;
}
buffer = (unsigned char *)__get_free_page(GFP_KERNEL);
if (!buffer) {
ret = -ENOMEM;
goto err_get_page;
}
max->con_xmit.buf = (unsigned char *)buffer;
max->con_xmit.head = max->con_xmit.tail = 0;
max->main_thread = kthread_run(max3110_main_thread,
max, "max3110_main");
if (IS_ERR(max->main_thread)) {
ret = PTR_ERR(max->main_thread);
goto err_kthread;
}
pmax = max;
/* give membase a psudo value to pass serial_core's check */
max->port.membase = (void *)0xff110000;
uart_add_one_port(&serial_m3110_reg, &max->port);
return 0;
err_kthread:
free_page((unsigned long)buffer);
err_get_page:
pmax = NULL;
kfree(max);
return ret;
}
static int max3110_remove(struct spi_device *dev)
{
struct uart_max3110 *max = pmax;
if (!pmax)
return 0;
pmax = NULL;
uart_remove_one_port(&serial_m3110_reg, &max->port);
free_page((unsigned long)max->con_xmit.buf);
if (max->main_thread)
kthread_stop(max->main_thread);
kfree(max);
return 0;
}
static struct spi_driver uart_max3110_driver = {
.driver = {
.name = "spi_max3111",
.bus = &spi_bus_type,
.owner = THIS_MODULE,
},
.probe = serial_m3110_probe,
.remove = __devexit_p(max3110_remove),
.suspend = serial_m3110_suspend,
.resume = serial_m3110_resume,
};
int __init serial_m3110_init(void)
{
int ret = 0;
ret = uart_register_driver(&serial_m3110_reg);
if (ret)
return ret;
ret = spi_register_driver(&uart_max3110_driver);
if (ret)
uart_unregister_driver(&serial_m3110_reg);
return ret;
}
void __exit serial_m3110_exit(void)
{
spi_unregister_driver(&uart_max3110_driver);
uart_unregister_driver(&serial_m3110_reg);
}
module_init(serial_m3110_init);
module_exit(serial_m3110_exit);
MODULE_LICENSE("GPL");
MODULE_ALIAS("max3110-uart");