mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-11-01 17:08:10 +00:00
Code Issues Releases Wiki Activity
linux-stable/kernel/signal.c

4621 lines
118 KiB
C
Raw Normal View History

treewide: Add SPDX license identifier for missed files Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-19 12:08:55 +00:00
// SPDX-License-Identifier: GPL-2.0-only
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* linux/kernel/signal.c
*
* Copyright (C) 1991, 1992 Linus Torvalds
*
* 1997-11-02 Modified for POSIX.1b signals by Richard Henderson
*
* 2003-06-02 Jim Houston - Concurrent Computer Corp.
* Changes to use preallocated sigqueue structures
* to allow signals to be sent reliably.
*/
#include <linux/slab.h>
kernel: Map most files to use export.h instead of module.h The changed files were only including linux/module.h for the EXPORT_SYMBOL infrastructure, and nothing else. Revector them onto the isolated export header for faster compile times. Nothing to see here but a whole lot of instances of: -#include <linux/module.h> +#include <linux/export.h> This commit is only changing the kernel dir; next targets will probably be mm, fs, the arch dirs, etc. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-23 18:51:41 +00:00
#include <linux/export.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <linux/init.h>
sched/headers: Prepare to remove the <linux/mm_types.h> dependency from <linux/sched.h> Update code that relied on sched.h including various MM types for them. This will allow us to remove the <linux/mm_types.h> include from <linux/sched.h>. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-03 23:16:44 +00:00
#include <linux/sched/mm.h>
sched/headers: Prepare for new header dependencies before moving code to <linux/sched/user.h> We are going to split <linux/sched/user.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/user.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-08 17:51:30 +00:00
#include <linux/sched/user.h>
sched/headers: Prepare for new header dependencies before moving code to <linux/sched/debug.h> We are going to split <linux/sched/debug.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/debug.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-08 17:51:35 +00:00
#include <linux/sched/debug.h>
sched/headers: Prepare for new header dependencies before moving code to <linux/sched/task.h> We are going to split <linux/sched/task.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/task.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-08 17:51:36 +00:00
#include <linux/sched/task.h>
sched/headers: Prepare for new header dependencies before moving code to <linux/sched/task_stack.h> We are going to split <linux/sched/task_stack.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/task_stack.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-08 17:51:37 +00:00
#include <linux/sched/task_stack.h>
sched/headers: Prepare to move cputime functionality from <linux/sched.h> into <linux/sched/cputime.h> Introduce a trivial, mostly empty <linux/sched/cputime.h> header to prepare for the moving of cputime functionality out of sched.h. Update all code that relies on these facilities. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-05 10:48:36 +00:00
#include <linux/sched/cputime.h>
signal: add pidfd_send_signal() syscall The kill() syscall operates on process identifiers (pid). After a process has exited its pid can be reused by another process. If a caller sends a signal to a reused pid it will end up signaling the wrong process. This issue has often surfaced and there has been a push to address this problem [1]. This patch uses file descriptors (fd) from proc/<pid> as stable handles on struct pid. Even if a pid is recycled the handle will not change. The fd can be used to send signals to the process it refers to. Thus, the new syscall pidfd_send_signal() is introduced to solve this problem. Instead of pids it operates on process fds (pidfd). /* prototype and argument /* long pidfd_send_signal(int pidfd, int sig, siginfo_t *info, unsigned int flags); /* syscall number 424 */ The syscall number was chosen to be 424 to align with Arnd's rework in his y2038 to minimize merge conflicts (cf. [25]). In addition to the pidfd and signal argument it takes an additional siginfo_t and flags argument. If the siginfo_t argument is NULL then pidfd_send_signal() is equivalent to kill(<positive-pid>, <signal>). If it is not NULL pidfd_send_signal() is equivalent to rt_sigqueueinfo(). The flags argument is added to allow for future extensions of this syscall. It currently needs to be passed as 0. Failing to do so will cause EINVAL. /* pidfd_send_signal() replaces multiple pid-based syscalls */ The pidfd_send_signal() syscall currently takes on the job of rt_sigqueueinfo(2) and parts of the functionality of kill(2), Namely, when a positive pid is passed to kill(2). It will however be possible to also replace tgkill(2) and rt_tgsigqueueinfo(2) if this syscall is extended. /* sending signals to threads (tid) and process groups (pgid) */ Specifically, the pidfd_send_signal() syscall does currently not operate on process groups or threads. This is left for future extensions. In order to extend the syscall to allow sending signal to threads and process groups appropriately named flags (e.g. PIDFD_TYPE_PGID, and PIDFD_TYPE_TID) should be added. This implies that the flags argument will determine what is signaled and not the file descriptor itself. Put in other words, grouping in this api is a property of the flags argument not a property of the file descriptor (cf. [13]). Clarification for this has been requested by Eric (cf. [19]). When appropriate extensions through the flags argument are added then pidfd_send_signal() can additionally replace the part of kill(2) which operates on process groups as well as the tgkill(2) and rt_tgsigqueueinfo(2) syscalls. How such an extension could be implemented has been very roughly sketched in [14], [15], and [16]. However, this should not be taken as a commitment to a particular implementation. There might be better ways to do it. Right now this is intentionally left out to keep this patchset as simple as possible (cf. [4]). /* naming */ The syscall had various names throughout iterations of this patchset: - procfd_signal() - procfd_send_signal() - taskfd_send_signal() In the last round of reviews it was pointed out that given that if the flags argument decides the scope of the signal instead of different types of fds it might make sense to either settle for "procfd_" or "pidfd_" as prefix. The community was willing to accept either (cf. [17] and [18]). Given that one developer expressed strong preference for the "pidfd_" prefix (cf. [13]) and with other developers less opinionated about the name we should settle for "pidfd_" to avoid further bikeshedding. The "_send_signal" suffix was chosen to reflect the fact that the syscall takes on the job of multiple syscalls. It is therefore intentional that the name is not reminiscent of neither kill(2) nor rt_sigqueueinfo(2). Not the fomer because it might imply that pidfd_send_signal() is a replacement for kill(2), and not the latter because it is a hassle to remember the correct spelling - especially for non-native speakers - and because it is not descriptive enough of what the syscall actually does. The name "pidfd_send_signal" makes it very clear that its job is to send signals. /* zombies */ Zombies can be signaled just as any other process. No special error will be reported since a zombie state is an unreliable state (cf. [3]). However, this can be added as an extension through the @flags argument if the need ever arises. /* cross-namespace signals */ The patch currently enforces that the signaler and signalee either are in the same pid namespace or that the signaler's pid namespace is an ancestor of the signalee's pid namespace. This is done for the sake of simplicity and because it is unclear to what values certain members of struct siginfo_t would need to be set to (cf. [5], [6]). /* compat syscalls */ It became clear that we would like to avoid adding compat syscalls (cf. [7]). The compat syscall handling is now done in kernel/signal.c itself by adding __copy_siginfo_from_user_generic() which lets us avoid compat syscalls (cf. [8]). It should be noted that the addition of __copy_siginfo_from_user_any() is caused by a bug in the original implementation of rt_sigqueueinfo(2) (cf. 12). With upcoming rework for syscall handling things might improve significantly (cf. [11]) and __copy_siginfo_from_user_any() will not gain any additional callers. /* testing */ This patch was tested on x64 and x86. /* userspace usage */ An asciinema recording for the basic functionality can be found under [9]. With this patch a process can be killed via: #define _GNU_SOURCE #include <errno.h> #include <fcntl.h> #include <signal.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/stat.h> #include <sys/syscall.h> #include <sys/types.h> #include <unistd.h> static inline int do_pidfd_send_signal(int pidfd, int sig, siginfo_t *info, unsigned int flags) { #ifdef __NR_pidfd_send_signal return syscall(__NR_pidfd_send_signal, pidfd, sig, info, flags); #else return -ENOSYS; #endif } int main(int argc, char *argv[]) { int fd, ret, saved_errno, sig; if (argc < 3) exit(EXIT_FAILURE); fd = open(argv[1], O_DIRECTORY | O_CLOEXEC); if (fd < 0) { printf("%s - Failed to open \"%s\"\n", strerror(errno), argv[1]); exit(EXIT_FAILURE); } sig = atoi(argv[2]); printf("Sending signal %d to process %s\n", sig, argv[1]); ret = do_pidfd_send_signal(fd, sig, NULL, 0); saved_errno = errno; close(fd); errno = saved_errno; if (ret < 0) { printf("%s - Failed to send signal %d to process %s\n", strerror(errno), sig, argv[1]); exit(EXIT_FAILURE); } exit(EXIT_SUCCESS); } /* Q&A * Given that it seems the same questions get asked again by people who are * late to the party it makes sense to add a Q&A section to the commit * message so it's hopefully easier to avoid duplicate threads. * * For the sake of progress please consider these arguments settled unless * there is a new point that desperately needs to be addressed. Please make * sure to check the links to the threads in this commit message whether * this has not already been covered. */ Q-01: (Florian Weimer [20], Andrew Morton [21]) What happens when the target process has exited? A-01: Sending the signal will fail with ESRCH (cf. [22]). Q-02: (Andrew Morton [21]) Is the task_struct pinned by the fd? A-02: No. A reference to struct pid is kept. struct pid - as far as I understand - was created exactly for the reason to not require to pin struct task_struct (cf. [22]). Q-03: (Andrew Morton [21]) Does the entire procfs directory remain visible? Just one entry within it? A-03: The same thing that happens right now when you hold a file descriptor to /proc/<pid> open (cf. [22]). Q-04: (Andrew Morton [21]) Does the pid remain reserved? A-04: No. This patchset guarantees a stable handle not that pids are not recycled (cf. [22]). Q-05: (Andrew Morton [21]) Do attempts to signal that fd return errors? A-05: See {Q,A}-01. Q-06: (Andrew Morton [22]) Is there a cleaner way of obtaining the fd? Another syscall perhaps. A-06: Userspace can already trivially retrieve file descriptors from procfs so this is something that we will need to support anyway. Hence, there's no immediate need to add another syscalls just to make pidfd_send_signal() not dependent on the presence of procfs. However, adding a syscalls to get such file descriptors is planned for a future patchset (cf. [22]). Q-07: (Andrew Morton [21] and others) This fd-for-a-process sounds like a handy thing and people may well think up other uses for it in the future, probably unrelated to signals. Are the code and the interface designed to permit such future applications? A-07: Yes (cf. [22]). Q-08: (Andrew Morton [21] and others) Now I think about it, why a new syscall? This thing is looking rather like an ioctl? A-08: This has been extensively discussed. It was agreed that a syscall is preferred for a variety or reasons. Here are just a few taken from prior threads. Syscalls are safer than ioctl()s especially when signaling to fds. Processes are a core kernel concept so a syscall seems more appropriate. The layout of the syscall with its four arguments would require the addition of a custom struct for the ioctl() thereby causing at least the same amount or even more complexity for userspace than a simple syscall. The new syscall will replace multiple other pid-based syscalls (see description above). The file-descriptors-for-processes concept introduced with this syscall will be extended with other syscalls in the future. See also [22], [23] and various other threads already linked in here. Q-09: (Florian Weimer [24]) What happens if you use the new interface with an O_PATH descriptor? A-09: pidfds opened as O_PATH fds cannot be used to send signals to a process (cf. [2]). Signaling processes through pidfds is the equivalent of writing to a file. Thus, this is not an operation that operates "purely at the file descriptor level" as required by the open(2) manpage. See also [4]. /* References */ [1]: https://lore.kernel.org/lkml/20181029221037.87724-1-dancol@google.com/ [2]: https://lore.kernel.org/lkml/874lbtjvtd.fsf@oldenburg2.str.redhat.com/ [3]: https://lore.kernel.org/lkml/20181204132604.aspfupwjgjx6fhva@brauner.io/ [4]: https://lore.kernel.org/lkml/20181203180224.fkvw4kajtbvru2ku@brauner.io/ [5]: https://lore.kernel.org/lkml/20181121213946.GA10795@mail.hallyn.com/ [6]: https://lore.kernel.org/lkml/20181120103111.etlqp7zop34v6nv4@brauner.io/ [7]: https://lore.kernel.org/lkml/36323361-90BD-41AF-AB5B-EE0D7BA02C21@amacapital.net/ [8]: https://lore.kernel.org/lkml/87tvjxp8pc.fsf@xmission.com/ [9]: https://asciinema.org/a/IQjuCHew6bnq1cr78yuMv16cy [11]: https://lore.kernel.org/lkml/F53D6D38-3521-4C20-9034-5AF447DF62FF@amacapital.net/ [12]: https://lore.kernel.org/lkml/87zhtjn8ck.fsf@xmission.com/ [13]: https://lore.kernel.org/lkml/871s6u9z6u.fsf@xmission.com/ [14]: https://lore.kernel.org/lkml/20181206231742.xxi4ghn24z4h2qki@brauner.io/ [15]: https://lore.kernel.org/lkml/20181207003124.GA11160@mail.hallyn.com/ [16]: https://lore.kernel.org/lkml/20181207015423.4miorx43l3qhppfz@brauner.io/ [17]: https://lore.kernel.org/lkml/CAGXu5jL8PciZAXvOvCeCU3wKUEB_dU-O3q0tDw4uB_ojMvDEew@mail.gmail.com/ [18]: https://lore.kernel.org/lkml/20181206222746.GB9224@mail.hallyn.com/ [19]: https://lore.kernel.org/lkml/20181208054059.19813-1-christian@brauner.io/ [20]: https://lore.kernel.org/lkml/8736rebl9s.fsf@oldenburg.str.redhat.com/ [21]: https://lore.kernel.org/lkml/20181228152012.dbf0508c2508138efc5f2bbe@linux-foundation.org/ [22]: https://lore.kernel.org/lkml/20181228233725.722tdfgijxcssg76@brauner.io/ [23]: https://lwn.net/Articles/773459/ [24]: https://lore.kernel.org/lkml/8736rebl9s.fsf@oldenburg.str.redhat.com/ [25]: https://lore.kernel.org/lkml/CAK8P3a0ej9NcJM8wXNPbcGUyOUZYX+VLoDFdbenW3s3114oQZw@mail.gmail.com/ Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Jann Horn <jannh@google.com> Cc: Andy Lutomirsky <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Florian Weimer <fweimer@redhat.com> Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Tycho Andersen <tycho@tycho.ws> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Serge Hallyn <serge@hallyn.com> Acked-by: Aleksa Sarai <cyphar@cyphar.com>
2018-11-18 23:51:56 +00:00
#include <linux/file.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <linux/fs.h>
signal: add pidfd_send_signal() syscall The kill() syscall operates on process identifiers (pid). After a process has exited its pid can be reused by another process. If a caller sends a signal to a reused pid it will end up signaling the wrong process. This issue has often surfaced and there has been a push to address this problem [1]. This patch uses file descriptors (fd) from proc/<pid> as stable handles on struct pid. Even if a pid is recycled the handle will not change. The fd can be used to send signals to the process it refers to. Thus, the new syscall pidfd_send_signal() is introduced to solve this problem. Instead of pids it operates on process fds (pidfd). /* prototype and argument /* long pidfd_send_signal(int pidfd, int sig, siginfo_t *info, unsigned int flags); /* syscall number 424 */ The syscall number was chosen to be 424 to align with Arnd's rework in his y2038 to minimize merge conflicts (cf. [25]). In addition to the pidfd and signal argument it takes an additional siginfo_t and flags argument. If the siginfo_t argument is NULL then pidfd_send_signal() is equivalent to kill(<positive-pid>, <signal>). If it is not NULL pidfd_send_signal() is equivalent to rt_sigqueueinfo(). The flags argument is added to allow for future extensions of this syscall. It currently needs to be passed as 0. Failing to do so will cause EINVAL. /* pidfd_send_signal() replaces multiple pid-based syscalls */ The pidfd_send_signal() syscall currently takes on the job of rt_sigqueueinfo(2) and parts of the functionality of kill(2), Namely, when a positive pid is passed to kill(2). It will however be possible to also replace tgkill(2) and rt_tgsigqueueinfo(2) if this syscall is extended. /* sending signals to threads (tid) and process groups (pgid) */ Specifically, the pidfd_send_signal() syscall does currently not operate on process groups or threads. This is left for future extensions. In order to extend the syscall to allow sending signal to threads and process groups appropriately named flags (e.g. PIDFD_TYPE_PGID, and PIDFD_TYPE_TID) should be added. This implies that the flags argument will determine what is signaled and not the file descriptor itself. Put in other words, grouping in this api is a property of the flags argument not a property of the file descriptor (cf. [13]). Clarification for this has been requested by Eric (cf. [19]). When appropriate extensions through the flags argument are added then pidfd_send_signal() can additionally replace the part of kill(2) which operates on process groups as well as the tgkill(2) and rt_tgsigqueueinfo(2) syscalls. How such an extension could be implemented has been very roughly sketched in [14], [15], and [16]. However, this should not be taken as a commitment to a particular implementation. There might be better ways to do it. Right now this is intentionally left out to keep this patchset as simple as possible (cf. [4]). /* naming */ The syscall had various names throughout iterations of this patchset: - procfd_signal() - procfd_send_signal() - taskfd_send_signal() In the last round of reviews it was pointed out that given that if the flags argument decides the scope of the signal instead of different types of fds it might make sense to either settle for "procfd_" or "pidfd_" as prefix. The community was willing to accept either (cf. [17] and [18]). Given that one developer expressed strong preference for the "pidfd_" prefix (cf. [13]) and with other developers less opinionated about the name we should settle for "pidfd_" to avoid further bikeshedding. The "_send_signal" suffix was chosen to reflect the fact that the syscall takes on the job of multiple syscalls. It is therefore intentional that the name is not reminiscent of neither kill(2) nor rt_sigqueueinfo(2). Not the fomer because it might imply that pidfd_send_signal() is a replacement for kill(2), and not the latter because it is a hassle to remember the correct spelling - especially for non-native speakers - and because it is not descriptive enough of what the syscall actually does. The name "pidfd_send_signal" makes it very clear that its job is to send signals. /* zombies */ Zombies can be signaled just as any other process. No special error will be reported since a zombie state is an unreliable state (cf. [3]). However, this can be added as an extension through the @flags argument if the need ever arises. /* cross-namespace signals */ The patch currently enforces that the signaler and signalee either are in the same pid namespace or that the signaler's pid namespace is an ancestor of the signalee's pid namespace. This is done for the sake of simplicity and because it is unclear to what values certain members of struct siginfo_t would need to be set to (cf. [5], [6]). /* compat syscalls */ It became clear that we would like to avoid adding compat syscalls (cf. [7]). The compat syscall handling is now done in kernel/signal.c itself by adding __copy_siginfo_from_user_generic() which lets us avoid compat syscalls (cf. [8]). It should be noted that the addition of __copy_siginfo_from_user_any() is caused by a bug in the original implementation of rt_sigqueueinfo(2) (cf. 12). With upcoming rework for syscall handling things might improve significantly (cf. [11]) and __copy_siginfo_from_user_any() will not gain any additional callers. /* testing */ This patch was tested on x64 and x86. /* userspace usage */ An asciinema recording for the basic functionality can be found under [9]. With this patch a process can be killed via: #define _GNU_SOURCE #include <errno.h> #include <fcntl.h> #include <signal.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/stat.h> #include <sys/syscall.h> #include <sys/types.h> #include <unistd.h> static inline int do_pidfd_send_signal(int pidfd, int sig, siginfo_t *info, unsigned int flags) { #ifdef __NR_pidfd_send_signal return syscall(__NR_pidfd_send_signal, pidfd, sig, info, flags); #else return -ENOSYS; #endif } int main(int argc, char *argv[]) { int fd, ret, saved_errno, sig; if (argc < 3) exit(EXIT_FAILURE); fd = open(argv[1], O_DIRECTORY | O_CLOEXEC); if (fd < 0) { printf("%s - Failed to open \"%s\"\n", strerror(errno), argv[1]); exit(EXIT_FAILURE); } sig = atoi(argv[2]); printf("Sending signal %d to process %s\n", sig, argv[1]); ret = do_pidfd_send_signal(fd, sig, NULL, 0); saved_errno = errno; close(fd); errno = saved_errno; if (ret < 0) { printf("%s - Failed to send signal %d to process %s\n", strerror(errno), sig, argv[1]); exit(EXIT_FAILURE); } exit(EXIT_SUCCESS); } /* Q&A * Given that it seems the same questions get asked again by people who are * late to the party it makes sense to add a Q&A section to the commit * message so it's hopefully easier to avoid duplicate threads. * * For the sake of progress please consider these arguments settled unless * there is a new point that desperately needs to be addressed. Please make * sure to check the links to the threads in this commit message whether * this has not already been covered. */ Q-01: (Florian Weimer [20], Andrew Morton [21]) What happens when the target process has exited? A-01: Sending the signal will fail with ESRCH (cf. [22]). Q-02: (Andrew Morton [21]) Is the task_struct pinned by the fd? A-02: No. A reference to struct pid is kept. struct pid - as far as I understand - was created exactly for the reason to not require to pin struct task_struct (cf. [22]). Q-03: (Andrew Morton [21]) Does the entire procfs directory remain visible? Just one entry within it? A-03: The same thing that happens right now when you hold a file descriptor to /proc/<pid> open (cf. [22]). Q-04: (Andrew Morton [21]) Does the pid remain reserved? A-04: No. This patchset guarantees a stable handle not that pids are not recycled (cf. [22]). Q-05: (Andrew Morton [21]) Do attempts to signal that fd return errors? A-05: See {Q,A}-01. Q-06: (Andrew Morton [22]) Is there a cleaner way of obtaining the fd? Another syscall perhaps. A-06: Userspace can already trivially retrieve file descriptors from procfs so this is something that we will need to support anyway. Hence, there's no immediate need to add another syscalls just to make pidfd_send_signal() not dependent on the presence of procfs. However, adding a syscalls to get such file descriptors is planned for a future patchset (cf. [22]). Q-07: (Andrew Morton [21] and others) This fd-for-a-process sounds like a handy thing and people may well think up other uses for it in the future, probably unrelated to signals. Are the code and the interface designed to permit such future applications? A-07: Yes (cf. [22]). Q-08: (Andrew Morton [21] and others) Now I think about it, why a new syscall? This thing is looking rather like an ioctl? A-08: This has been extensively discussed. It was agreed that a syscall is preferred for a variety or reasons. Here are just a few taken from prior threads. Syscalls are safer than ioctl()s especially when signaling to fds. Processes are a core kernel concept so a syscall seems more appropriate. The layout of the syscall with its four arguments would require the addition of a custom struct for the ioctl() thereby causing at least the same amount or even more complexity for userspace than a simple syscall. The new syscall will replace multiple other pid-based syscalls (see description above). The file-descriptors-for-processes concept introduced with this syscall will be extended with other syscalls in the future. See also [22], [23] and various other threads already linked in here. Q-09: (Florian Weimer [24]) What happens if you use the new interface with an O_PATH descriptor? A-09: pidfds opened as O_PATH fds cannot be used to send signals to a process (cf. [2]). Signaling processes through pidfds is the equivalent of writing to a file. Thus, this is not an operation that operates "purely at the file descriptor level" as required by the open(2) manpage. See also [4]. /* References */ [1]: https://lore.kernel.org/lkml/20181029221037.87724-1-dancol@google.com/ [2]: https://lore.kernel.org/lkml/874lbtjvtd.fsf@oldenburg2.str.redhat.com/ [3]: https://lore.kernel.org/lkml/20181204132604.aspfupwjgjx6fhva@brauner.io/ [4]: https://lore.kernel.org/lkml/20181203180224.fkvw4kajtbvru2ku@brauner.io/ [5]: https://lore.kernel.org/lkml/20181121213946.GA10795@mail.hallyn.com/ [6]: https://lore.kernel.org/lkml/20181120103111.etlqp7zop34v6nv4@brauner.io/ [7]: https://lore.kernel.org/lkml/36323361-90BD-41AF-AB5B-EE0D7BA02C21@amacapital.net/ [8]: https://lore.kernel.org/lkml/87tvjxp8pc.fsf@xmission.com/ [9]: https://asciinema.org/a/IQjuCHew6bnq1cr78yuMv16cy [11]: https://lore.kernel.org/lkml/F53D6D38-3521-4C20-9034-5AF447DF62FF@amacapital.net/ [12]: https://lore.kernel.org/lkml/87zhtjn8ck.fsf@xmission.com/ [13]: https://lore.kernel.org/lkml/871s6u9z6u.fsf@xmission.com/ [14]: https://lore.kernel.org/lkml/20181206231742.xxi4ghn24z4h2qki@brauner.io/ [15]: https://lore.kernel.org/lkml/20181207003124.GA11160@mail.hallyn.com/ [16]: https://lore.kernel.org/lkml/20181207015423.4miorx43l3qhppfz@brauner.io/ [17]: https://lore.kernel.org/lkml/CAGXu5jL8PciZAXvOvCeCU3wKUEB_dU-O3q0tDw4uB_ojMvDEew@mail.gmail.com/ [18]: https://lore.kernel.org/lkml/20181206222746.GB9224@mail.hallyn.com/ [19]: https://lore.kernel.org/lkml/20181208054059.19813-1-christian@brauner.io/ [20]: https://lore.kernel.org/lkml/8736rebl9s.fsf@oldenburg.str.redhat.com/ [21]: https://lore.kernel.org/lkml/20181228152012.dbf0508c2508138efc5f2bbe@linux-foundation.org/ [22]: https://lore.kernel.org/lkml/20181228233725.722tdfgijxcssg76@brauner.io/ [23]: https://lwn.net/Articles/773459/ [24]: https://lore.kernel.org/lkml/8736rebl9s.fsf@oldenburg.str.redhat.com/ [25]: https://lore.kernel.org/lkml/CAK8P3a0ej9NcJM8wXNPbcGUyOUZYX+VLoDFdbenW3s3114oQZw@mail.gmail.com/ Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Jann Horn <jannh@google.com> Cc: Andy Lutomirsky <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Florian Weimer <fweimer@redhat.com> Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Tycho Andersen <tycho@tycho.ws> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Serge Hallyn <serge@hallyn.com> Acked-by: Aleksa Sarai <cyphar@cyphar.com>
2018-11-18 23:51:56 +00:00
#include <linux/proc_fs.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <linux/tty.h>
#include <linux/binfmts.h>
coredump: update coredump-related headers Create a new header file, fs/coredump.h, which contains functions only used by the new coredump.c. It also moves do_coredump to the include/linux/coredump.h header file, for consistency. Signed-off-by: Alex Kelly <alex.page.kelly@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-05 00:15:24 +00:00
#include <linux/coredump.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <linux/security.h>
#include <linux/syscalls.h>
#include <linux/ptrace.h>
[PATCH] convert that currently tests _NSIG directly to use valid_signal() Convert most of the current code that uses _NSIG directly to instead use valid_signal(). This avoids gcc -W warnings and off-by-one errors. Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 15:59:14 +00:00
#include <linux/signal.h>
signal/timer/event: signalfd core This patch series implements the new signalfd() system call. I took part of the original Linus code (and you know how badly it can be broken :), and I added even more breakage ;) Signals are fetched from the same signal queue used by the process, so signalfd will compete with standard kernel delivery in dequeue_signal(). If you want to reliably fetch signals on the signalfd file, you need to block them with sigprocmask(SIG_BLOCK). This seems to be working fine on my Dual Opteron machine. I made a quick test program for it: http://www.xmailserver.org/signafd-test.c The signalfd() system call implements signal delivery into a file descriptor receiver. The signalfd file descriptor if created with the following API: int signalfd(int ufd, const sigset_t *mask, size_t masksize); The "ufd" parameter allows to change an existing signalfd sigmask, w/out going to close/create cycle (Linus idea). Use "ufd" == -1 if you want a brand new signalfd file. The "mask" allows to specify the signal mask of signals that we are interested in. The "masksize" parameter is the size of "mask". The signalfd fd supports the poll(2) and read(2) system calls. The poll(2) will return POLLIN when signals are available to be dequeued. As a direct consequence of supporting the Linux poll subsystem, the signalfd fd can use used together with epoll(2) too. The read(2) system call will return a "struct signalfd_siginfo" structure in the userspace supplied buffer. The return value is the number of bytes copied in the supplied buffer, or -1 in case of error. The read(2) call can also return 0, in case the sighand structure to which the signalfd was attached, has been orphaned. The O_NONBLOCK flag is also supported, and read(2) will return -EAGAIN in case no signal is available. If the size of the buffer passed to read(2) is lower than sizeof(struct signalfd_siginfo), -EINVAL is returned. A read from the signalfd can also return -ERESTARTSYS in case a signal hits the process. The format of the struct signalfd_siginfo is, and the valid fields depends of the (->code & __SI_MASK) value, in the same way a struct siginfo would: struct signalfd_siginfo { __u32 signo; /* si_signo */ __s32 err; /* si_errno */ __s32 code; /* si_code */ __u32 pid; /* si_pid */ __u32 uid; /* si_uid */ __s32 fd; /* si_fd */ __u32 tid; /* si_fd */ __u32 band; /* si_band */ __u32 overrun; /* si_overrun */ __u32 trapno; /* si_trapno */ __s32 status; /* si_status */ __s32 svint; /* si_int */ __u64 svptr; /* si_ptr */ __u64 utime; /* si_utime */ __u64 stime; /* si_stime */ __u64 addr; /* si_addr */ }; [akpm@linux-foundation.org: fix signalfd_copyinfo() on i386] Signed-off-by: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11 05:23:13 +00:00
#include <linux/signalfd.h>
signal: Print warning message when dropping signals When the system has too many timers or too many aggregate queued signals, the EAGAIN error is returned to application from kernel, including timer_create() [POSIX.1b]. It means that the app exceeded the limit of pending signals, but in general application writers do not expect this outcome and the current silent failure can cause rare app failures under very high load. This patch adds a new message when we reach the limit and if print_fatal_signals is enabled: task/1234: reached RLIMIT_SIGPENDING, dropping signal If you see this message and your system behaved unexpectedly, you can run following command to lift the limit: # ulimit -i unlimited With help from Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>. Signed-off-by: Naohiro Ooiwa <nooiwa@miraclelinux.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Cc: Roland McGrath <roland@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: oleg@redhat.com LKML-Reference: <4AF6E7E2.9080406@miraclelinux.com> [ Modified a few small details, gave surrounding code some love. ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-08 15:46:42 +00:00
#include <linux/ratelimit.h>
tracehook: tracehook_consider_ignored_signal This defines tracehook_consider_ignored_signal() has a fine-grained hook for deciding to prevent the normal short-circuit of sending an ignored signal, as ptrace does. There is no change, only cleanup. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Reviewed-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 02:45:51 +00:00
#include <linux/tracehook.h>
[PATCH] move capable() to capability.h - Move capable() from sched.h to capability.h; - Use <linux/capability.h> where capable() is used (in include/, block/, ipc/, kernel/, a few drivers/, mm/, security/, & sound/; many more drivers/ to go) Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 20:17:46 +00:00
#include <linux/capability.h>
[PATCH] Add include/linux/freezer.h and move definitions from sched.h Move process freezing functions from include/linux/sched.h to freezer.h, so that modifications to the freezer or the kernel configuration don't require recompiling just about everything. [akpm@osdl.org: fix ueagle driver] Signed-off-by: Nigel Cunningham <nigel@suspend2.net> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 04:34:23 +00:00
#include <linux/freezer.h>
[PATCH] add child reaper to pid_namespace Add a per pid_namespace child-reaper. This is needed so processes are reaped within the same pid space and do not spill over to the parent pid space. Its also needed so containers preserve existing semantic that pid == 1 would reap orphaned children. This is based on Eric Biederman's patch: http://lkml.org/lkml/2006/2/6/285 Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com> Signed-off-by: Cedric Le Goater <clg@fr.ibm.com> Cc: Kirill Korotaev <dev@openvz.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 10:38:01 +00:00
#include <linux/pid_namespace.h>
#include <linux/nsproxy.h>
user namespace: make signal.c respect user namespaces ipc/mqueue.c: for __SI_MESQ, convert the uid being sent to recipient's user namespace. (new, thanks Oleg) __send_signal: convert current's uid to the recipient's user namespace for any siginfo which is not SI_FROMKERNEL (patch from Oleg, thanks again :) do_notify_parent and do_notify_parent_cldstop: map task's uid to parent's user namespace ptrace_signal maps parent's uid into current's user namespace before including in signal to current. IIUC Oleg has argued that this shouldn't matter as the debugger will play with it, but it seems like not converting the value currently being set is misleading. Changelog: Sep 20: Inspired by Oleg's suggestion, define map_cred_ns() helper to simplify callers and help make clear what we are translating (which uid into which namespace). Passing the target task would make callers even easier to read, but we pass in user_ns because current_user_ns() != task_cred_xxx(current, user_ns). Sep 20: As recommended by Oleg, also put task_pid_vnr() under rcu_read_lock in ptrace_signal(). Sep 23: In send_signal(), detect when (user) signal is coming from an ancestor or unrelated user namespace. Pass that on to __send_signal, which sets si_uid to 0 or overflowuid if needed. Oct 12: Base on Oleg's fixup_uid() patch. On top of that, handle all SI_FROMKERNEL cases at callers, because we can't assume sender is current in those cases. Nov 10: (mhelsley) rename fixup_uid to more meaningful usern_fixup_signal_uid Nov 10: (akpm) make the !CONFIG_USER_NS case clearer Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> From: Serge Hallyn <serge.hallyn@canonical.com> Subject: __send_signal: pass q->info, not info, to userns_fixup_signal_uid (v2) Eric Biederman pointed out that passing info is a bug and could lead to a NULL pointer deref to boot. A collection of signal, securebits, filecaps, cap_bounds, and a few other ltp tests passed with this kernel. Changelog: Nov 18: previous patch missed a leading '&' Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> From: Dan Carpenter <dan.carpenter@oracle.com> Subject: ipc/mqueue: lock() => unlock() typo There was a double lock typo introduced in b085f4bd6b21 "user namespace: make signal.c respect user namespaces" Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Serge Hallyn <serge@hallyn.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10 23:11:37 +00:00
#include <linux/user_namespace.h>
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-13 18:00:11 +00:00
#include <linux/uprobes.h>
generic compat_sys_sigaltstack() Again, conditional on CONFIG_GENERIC_SIGALTSTACK Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-14 19:47:53 +00:00
#include <linux/compat.h>
connector: Added coredumping event to the process connector Process connector can now also detect coredumping events. Main aim of patch is get notified at start of coredumping, instead of having to wait for it to finish and then being notified through EXIT event. Could be used for instance by process-managers that want to get notified as soon as possible about process failures, and not necessarily beeing notified after coredump, which could be in the order of minutes depending on size of coredump, piping and so on. Signed-off-by: Jesper Derehag <jderehag@hotmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19 20:50:05 +00:00
#include <linux/cn_proc.h>
kernel: use macros from compiler.h instead of __attribute__((...)) To increase compiler portability there is <linux/compiler.h> which provides convenience macros for various gcc constructs. Eg: __weak for __attribute__((weak)). I've replaced all instances of gcc attributes with the right macro in the kernel subsystem. Signed-off-by: Gideon Israel Dsouza <gidisrael@gmail.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 22:39:20 +00:00
#include <linux/compiler.h>
posix-timers: Move the do_schedule_next_timer declaration Having it in asm-generic/siginfo.h doesn't make any sense as it is in no way architecture specific. Move it to posix-timers.h instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-ia64@vger.kernel.org Cc: Arnd Bergmann <arnd@arndb.de> Cc: sparclinux@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Link: http://lkml.kernel.org/r/20170603190102.28866-4-hch@lst.de
2017-06-03 19:01:00 +00:00
#include <linux/posix-timers.h>
livepatch: send a fake signal to all blocking tasks Live patching consistency model is of LEAVE_PATCHED_SET and SWITCH_THREAD. This means that all tasks in the system have to be marked one by one as safe to call a new patched function. Safe means when a task is not (sleeping) in a set of patched functions. That is, no patched function is on the task's stack. Another clearly safe place is the boundary between kernel and userspace. The patching waits for all tasks to get outside of the patched set or to cross the boundary. The transition is completed afterwards. The problem is that a task can block the transition for quite a long time, if not forever. It could sleep in a set of patched functions, for example. Luckily we can force the task to leave the set by sending it a fake signal, that is a signal with no data in signal pending structures (no handler, no sign of proper signal delivered). Suspend/freezer use this to freeze the tasks as well. The task gets TIF_SIGPENDING set and is woken up (if it has been sleeping in the kernel before) or kicked by rescheduling IPI (if it was running on other CPU). This causes the task to go to kernel/userspace boundary where the signal would be handled and the task would be marked as safe in terms of live patching. There are tasks which are not affected by this technique though. The fake signal is not sent to kthreads. They should be handled differently. They can be woken up so they leave the patched set and their TIF_PATCH_PENDING can be cleared thanks to stack checking. For the sake of completeness, if the task is in TASK_RUNNING state but not currently running on some CPU it doesn't get the IPI, but it would eventually handle the signal anyway. Second, if the task runs in the kernel (in TASK_RUNNING state) it gets the IPI, but the signal is not handled on return from the interrupt. It would be handled on return to the userspace in the future when the fake signal is sent again. Stack checking deals with these cases in a better way. If the task was sleeping in a syscall it would be woken by our fake signal, it would check if TIF_SIGPENDING is set (by calling signal_pending() predicate) and return ERESTART* or EINTR. Syscalls with ERESTART* return values are restarted in case of the fake signal (see do_signal()). EINTR is propagated back to the userspace program. This could disturb the program, but... * each process dealing with signals should react accordingly to EINTR return values. * syscalls returning EINTR happen to be quite common situation in the system even if no fake signal is sent. * freezer sends the fake signal and does not deal with EINTR anyhow. Thus EINTR values are returned when the system is resumed. The very safe marking is done in architectures' "entry" on syscall and interrupt/exception exit paths, and in a stack checking functions of livepatch. TIF_PATCH_PENDING is cleared and the next recalc_sigpending() drops TIF_SIGPENDING. In connection with this, also call klp_update_patch_state() before do_signal(), so that recalc_sigpending() in dequeue_signal() can clear TIF_PATCH_PENDING immediately and thus prevent a double call of do_signal(). Note that the fake signal is not sent to stopped/traced tasks. Such task prevents the patching to finish till it continues again (is not traced anymore). Last, sending the fake signal is not automatic. It is done only when admin requests it by writing 1 to signal sysfs attribute in livepatch sysfs directory. Signed-off-by: Miroslav Benes <mbenes@suse.cz> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: linuxppc-dev@lists.ozlabs.org Cc: x86@kernel.org Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-15 13:50:13 +00:00
#include <linux/livepatch.h>
cgroup: cgroup v2 freezer Cgroup v1 implements the freezer controller, which provides an ability to stop the workload in a cgroup and temporarily free up some resources (cpu, io, network bandwidth and, potentially, memory) for some other tasks. Cgroup v2 lacks this functionality. This patch implements freezer for cgroup v2. Cgroup v2 freezer tries to put tasks into a state similar to jobctl stop. This means that tasks can be killed, ptraced (using PTRACE_SEIZE*), and interrupted. It is possible to attach to a frozen task, get some information (e.g. read registers) and detach. It's also possible to migrate a frozen tasks to another cgroup. This differs cgroup v2 freezer from cgroup v1 freezer, which mostly tried to imitate the system-wide freezer. However uninterruptible sleep is fine when all tasks are going to be frozen (hibernation case), it's not the acceptable state for some subset of the system. Cgroup v2 freezer is not supporting freezing kthreads. If a non-root cgroup contains kthread, the cgroup still can be frozen, but the kthread will remain running, the cgroup will be shown as non-frozen, and the notification will not be delivered. * PTRACE_ATTACH is not working because non-fatal signal delivery is blocked in frozen state. There are some interface differences between cgroup v1 and cgroup v2 freezer too, which are required to conform the cgroup v2 interface design principles: 1) There is no separate controller, which has to be turned on: the functionality is always available and is represented by cgroup.freeze and cgroup.events cgroup control files. 2) The desired state is defined by the cgroup.freeze control file. Any hierarchical configuration is allowed. 3) The interface is asynchronous. The actual state is available using cgroup.events control file ("frozen" field). There are no dedicated transitional states. 4) It's allowed to make any changes with the cgroup hierarchy (create new cgroups, remove old cgroups, move tasks between cgroups) no matter if some cgroups are frozen. Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org> No-objection-from-me-by: Oleg Nesterov <oleg@redhat.com> Cc: kernel-team@fb.com
2019-04-19 17:03:04 +00:00
#include <linux/cgroup.h>
audit: deliver signal_info regarless of syscall When a process signals the audit daemon (shutdown, rotate, resume, reconfig) but syscall auditing is not enabled, we still want to know the identity of the process sending the signal to the audit daemon. Move audit_signal_info() out of syscall auditing to general auditing but create a new function audit_signal_info_syscall() to take care of the syscall dependent parts for when syscall auditing is enabled. Please see the github kernel audit issue https://github.com/linux-audit/audit-kernel/issues/111 Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-05-10 16:21:49 +00:00
#include <linux/audit.h>
kernel: use macros from compiler.h instead of __attribute__((...)) To increase compiler portability there is <linux/compiler.h> which provides convenience macros for various gcc constructs. Eg: __weak for __attribute__((weak)). I've replaced all instances of gcc attributes with the right macro in the kernel subsystem. Signed-off-by: Gideon Israel Dsouza <gidisrael@gmail.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 22:39:20 +00:00
tracepoint: Move signal sending tracepoint to events/signal.h Move signal sending event to events/signal.h. This patch also renames sched_signal_send event to signal_generate. Changes in v4: - Fix a typo of task_struct pointer. Changes in v3: - Add docbook style comments Changes in v2: - Add siginfo argument - Add siginfo storing macro Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Reviewed-by: Jason Baron <jbaron@redhat.com> Acked-by: Roland McGrath <roland@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Oleg Nesterov <oleg@redhat.com> LKML-Reference: <20091124215645.30449.60208.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-24 21:56:45 +00:00
#define CREATE_TRACE_POINTS
#include <trace/events/signal.h>
[PATCH] add child reaper to pid_namespace Add a per pid_namespace child-reaper. This is needed so processes are reaped within the same pid space and do not spill over to the parent pid space. Its also needed so containers preserve existing semantic that pid == 1 would reap orphaned children. This is based on Eric Biederman's patch: http://lkml.org/lkml/2006/2/6/285 Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com> Signed-off-by: Cedric Le Goater <clg@fr.ibm.com> Cc: Kirill Korotaev <dev@openvz.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 10:38:01 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <asm/param.h>
Replace <asm/uaccess.h> with <linux/uaccess.h> globally This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-24 19:46:01 +00:00
#include <linux/uaccess.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <asm/unistd.h>
#include <asm/siginfo.h>
Disintegrate asm/system.h for Sparc Disintegrate asm/system.h for Sparc. Signed-off-by: David Howells <dhowells@redhat.com> cc: sparclinux@vger.kernel.org
2012-03-28 17:30:03 +00:00
#include <asm/cacheflush.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* SLAB caches for signal bits.
*/
[PATCH] slab: remove kmem_cache_t Replace all uses of kmem_cache_t with struct kmem_cache. The patch was generated using the following script: #!/bin/sh # # Replace one string by another in all the kernel sources. # set -e for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do quilt add $file sed -e "1,\$s/$1/$2/g" $file >/tmp/$$ mv /tmp/$$ $file quilt refresh done The script was run like this sh replace kmem_cache_t "struct kmem_cache" Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 04:33:20 +00:00
static struct kmem_cache *sigqueue_cachep;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
signal: Print warning message when dropping signals When the system has too many timers or too many aggregate queued signals, the EAGAIN error is returned to application from kernel, including timer_create() [POSIX.1b]. It means that the app exceeded the limit of pending signals, but in general application writers do not expect this outcome and the current silent failure can cause rare app failures under very high load. This patch adds a new message when we reach the limit and if print_fatal_signals is enabled: task/1234: reached RLIMIT_SIGPENDING, dropping signal If you see this message and your system behaved unexpectedly, you can run following command to lift the limit: # ulimit -i unlimited With help from Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>. Signed-off-by: Naohiro Ooiwa <nooiwa@miraclelinux.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Cc: Roland McGrath <roland@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: oleg@redhat.com LKML-Reference: <4AF6E7E2.9080406@miraclelinux.com> [ Modified a few small details, gave surrounding code some love. ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-08 15:46:42 +00:00
int print_fatal_signals __read_mostly;
tracehook: tracehook_consider_ignored_signal This defines tracehook_consider_ignored_signal() has a fine-grained hook for deciding to prevent the normal short-circuit of sending an ignored signal, as ptrace does. There is no change, only cleanup. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Reviewed-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 02:45:51 +00:00
static void __user *sig_handler(struct task_struct *t, int sig)
signals: consolidate checks for whether or not to ignore a signal Both sig_ignored() and do_sigaction() check for signr to be explicitly or implicitly ignored. Introduce a helper for them. This patch is aimed to help handling signals by pid namespace's init, and was derived from one of Oleg's patches https://lists.linux-foundation.org/pipermail/containers/2007-December/009308.html so, if he doesn't mind, he should be considered as an author. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:39 +00:00
{
tracehook: tracehook_consider_ignored_signal This defines tracehook_consider_ignored_signal() has a fine-grained hook for deciding to prevent the normal short-circuit of sending an ignored signal, as ptrace does. There is no change, only cleanup. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Reviewed-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 02:45:51 +00:00
return t->sighand->action[sig - 1].sa.sa_handler;
}
signals: consolidate checks for whether or not to ignore a signal Both sig_ignored() and do_sigaction() check for signr to be explicitly or implicitly ignored. Introduce a helper for them. This patch is aimed to help handling signals by pid namespace's init, and was derived from one of Oleg's patches https://lists.linux-foundation.org/pipermail/containers/2007-December/009308.html so, if he doesn't mind, he should be considered as an author. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:39 +00:00
signal: make sig_handler_ignored() return bool sig_handler_ignored() already behaves like a boolean function. Let's actually declare it as such too. Link: http://lkml.kernel.org/r/20180602103653.18181-8-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Morris <james.morris@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 05:00:15 +00:00
static inline bool sig_handler_ignored(void __user *handler, int sig)
tracehook: tracehook_consider_ignored_signal This defines tracehook_consider_ignored_signal() has a fine-grained hook for deciding to prevent the normal short-circuit of sending an ignored signal, as ptrace does. There is no change, only cleanup. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Reviewed-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 02:45:51 +00:00
{
signals: consolidate checks for whether or not to ignore a signal Both sig_ignored() and do_sigaction() check for signr to be explicitly or implicitly ignored. Introduce a helper for them. This patch is aimed to help handling signals by pid namespace's init, and was derived from one of Oleg's patches https://lists.linux-foundation.org/pipermail/containers/2007-December/009308.html so, if he doesn't mind, he should be considered as an author. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:39 +00:00
/* Is it explicitly or implicitly ignored? */
return handler == SIG_IGN ||
signal: make sig_handler_ignored() return bool sig_handler_ignored() already behaves like a boolean function. Let's actually declare it as such too. Link: http://lkml.kernel.org/r/20180602103653.18181-8-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Morris <james.morris@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 05:00:15 +00:00
(handler == SIG_DFL && sig_kernel_ignore(sig));
signals: consolidate checks for whether or not to ignore a signal Both sig_ignored() and do_sigaction() check for signr to be explicitly or implicitly ignored. Introduce a helper for them. This patch is aimed to help handling signals by pid namespace's init, and was derived from one of Oleg's patches https://lists.linux-foundation.org/pipermail/containers/2007-December/009308.html so, if he doesn't mind, he should be considered as an author. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:39 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
signal: make sig_task_ignored() return bool sig_task_ignored() already behaves like a boolean function. Let's actually declare it as such too. Link: http://lkml.kernel.org/r/20180602103653.18181-9-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Morris <james.morris@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 05:00:19 +00:00
static bool sig_task_ignored(struct task_struct *t, int sig, bool force)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
tracehook: tracehook_consider_ignored_signal This defines tracehook_consider_ignored_signal() has a fine-grained hook for deciding to prevent the normal short-circuit of sending an ignored signal, as ptrace does. There is no change, only cleanup. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Reviewed-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 02:45:51 +00:00
void __user *handler;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
signals: protect init from unwanted signals more (This is a modified version of the patch submitted by Oleg Nesterov http://lkml.org/lkml/2008/11/18/249 and tries to address comments that came up in that discussion) init ignores the SIG_DFL signals but we queue them anyway, including SIGKILL. This is mostly OK, the signal will be dropped silently when dequeued, but the pending SIGKILL has 2 bad implications: - it implies fatal_signal_pending(), so we confuse things like wait_for_completion_killable/lock_page_killable. - for the sub-namespace inits, the pending SIGKILL can mask (legacy_queue) the subsequent SIGKILL from the parent namespace which must kill cinit reliably. (preparation, cinits don't have SIGNAL_UNKILLABLE yet) The patch can't help when init is ptraced, but ptracing of init is not "safe" anyway. Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Acked-by: Roland McGrath <roland@redhat.com> Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Daniel Lezcano <daniel.lezcano@free.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 23:58:02 +00:00
handler = sig_handler(t, sig);
signal: Always ignore SIGKILL and SIGSTOP sent to the global init If the first process started (aka /sbin/init) receives a SIGKILL it will panic the system if it is delivered. Making the system unusable and undebugable. It isn't much better if the first process started receives SIGSTOP. So always ignore SIGSTOP and SIGKILL sent to init. This is done in a separate clause in sig_task_ignored as force_sig_info can clear SIG_UNKILLABLE and this protection should work even then. Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-07-20 00:47:27 +00:00
/* SIGKILL and SIGSTOP may not be sent to the global init */
if (unlikely(is_global_init(t) && sig_kernel_only(sig)))
return true;
signals: protect init from unwanted signals more (This is a modified version of the patch submitted by Oleg Nesterov http://lkml.org/lkml/2008/11/18/249 and tries to address comments that came up in that discussion) init ignores the SIG_DFL signals but we queue them anyway, including SIGKILL. This is mostly OK, the signal will be dropped silently when dequeued, but the pending SIGKILL has 2 bad implications: - it implies fatal_signal_pending(), so we confuse things like wait_for_completion_killable/lock_page_killable. - for the sub-namespace inits, the pending SIGKILL can mask (legacy_queue) the subsequent SIGKILL from the parent namespace which must kill cinit reliably. (preparation, cinits don't have SIGNAL_UNKILLABLE yet) The patch can't help when init is ptraced, but ptracing of init is not "safe" anyway. Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Acked-by: Roland McGrath <roland@redhat.com> Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Daniel Lezcano <daniel.lezcano@free.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 23:58:02 +00:00
if (unlikely(t->signal->flags & SIGNAL_UNKILLABLE) &&
kernel/signal.c: protect the SIGNAL_UNKILLABLE tasks from !sig_kernel_only() signals Change sig_task_ignored() to drop the SIG_DFL && !sig_kernel_only() signals even if force == T. This simplifies the next change and this matches the same check in get_signal() which will drop these signals anyway. Link: http://lkml.kernel.org/r/20171103184227.GC21036@redhat.com Signed-off-by: Oleg Nesterov <oleg@redhat.com> Tested-by: Kyle Huey <me@kylehuey.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-17 23:30:04 +00:00
handler == SIG_DFL && !(force && sig_kernel_only(sig)))
signal: make sig_task_ignored() return bool sig_task_ignored() already behaves like a boolean function. Let's actually declare it as such too. Link: http://lkml.kernel.org/r/20180602103653.18181-9-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Morris <james.morris@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 05:00:19 +00:00
return true;
signals: protect init from unwanted signals more (This is a modified version of the patch submitted by Oleg Nesterov http://lkml.org/lkml/2008/11/18/249 and tries to address comments that came up in that discussion) init ignores the SIG_DFL signals but we queue them anyway, including SIGKILL. This is mostly OK, the signal will be dropped silently when dequeued, but the pending SIGKILL has 2 bad implications: - it implies fatal_signal_pending(), so we confuse things like wait_for_completion_killable/lock_page_killable. - for the sub-namespace inits, the pending SIGKILL can mask (legacy_queue) the subsequent SIGKILL from the parent namespace which must kill cinit reliably. (preparation, cinits don't have SIGNAL_UNKILLABLE yet) The patch can't help when init is ptraced, but ptracing of init is not "safe" anyway. Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Acked-by: Roland McGrath <roland@redhat.com> Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Daniel Lezcano <daniel.lezcano@free.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 23:58:02 +00:00
signal: Allow cifs and drbd to receive their terminating signals My recent to change to only use force_sig for a synchronous events wound up breaking signal reception cifs and drbd. I had overlooked the fact that by default kthreads start out with all signals set to SIG_IGN. So a change I thought was safe turned out to have made it impossible for those kernel thread to catch their signals. Reverting the work on force_sig is a bad idea because what the code was doing was very much a misuse of force_sig. As the way force_sig ultimately allowed the signal to happen was to change the signal handler to SIG_DFL. Which after the first signal will allow userspace to send signals to these kernel threads. At least for wake_ack_receiver in drbd that does not appear actively wrong. So correct this problem by adding allow_kernel_signal that will allow signals whose siginfo reports they were sent by the kernel through, but will not allow userspace generated signals, and update cifs and drbd to call allow_kernel_signal in an appropriate place so that their thread can receive this signal. Fixing things this way ensures that userspace won't be able to send signals and cause problems, that it is clear which signals the threads are expecting to receive, and it guarantees that nothing else in the system will be affected. This change was partly inspired by similar cifs and drbd patches that added allow_signal. Reported-by: ronnie sahlberg <ronniesahlberg@gmail.com> Reported-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Tested-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Cc: Steve French <smfrench@gmail.com> Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: David Laight <David.Laight@ACULAB.COM> Fixes: 247bc9470b1e ("cifs: fix rmmod regression in cifs.ko caused by force_sig changes") Fixes: 72abe3bcf091 ("signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of force_sig") Fixes: fee109901f39 ("signal/drbd: Use send_sig not force_sig") Fixes: 3cf5d076fb4d ("signal: Remove task parameter from force_sig") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-08-16 17:33:54 +00:00
/* Only allow kernel generated signals to this kthread */
if (unlikely((t->flags & PF_KTHREAD) &&
(handler == SIG_KTHREAD_KERNEL) && !force))
return true;
signals: protect init from unwanted signals more (This is a modified version of the patch submitted by Oleg Nesterov http://lkml.org/lkml/2008/11/18/249 and tries to address comments that came up in that discussion) init ignores the SIG_DFL signals but we queue them anyway, including SIGKILL. This is mostly OK, the signal will be dropped silently when dequeued, but the pending SIGKILL has 2 bad implications: - it implies fatal_signal_pending(), so we confuse things like wait_for_completion_killable/lock_page_killable. - for the sub-namespace inits, the pending SIGKILL can mask (legacy_queue) the subsequent SIGKILL from the parent namespace which must kill cinit reliably. (preparation, cinits don't have SIGNAL_UNKILLABLE yet) The patch can't help when init is ptraced, but ptracing of init is not "safe" anyway. Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Acked-by: Roland McGrath <roland@redhat.com> Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Daniel Lezcano <daniel.lezcano@free.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 23:58:02 +00:00
return sig_handler_ignored(handler, sig);
}
signal: make sig_ignored() return bool sig_ignored() already behaves like a boolean function. Let's actually declare it as such too. Link: http://lkml.kernel.org/r/20180602103653.18181-10-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Morris <james.morris@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 05:00:23 +00:00
static bool sig_ignored(struct task_struct *t, int sig, bool force)
signals: protect init from unwanted signals more (This is a modified version of the patch submitted by Oleg Nesterov http://lkml.org/lkml/2008/11/18/249 and tries to address comments that came up in that discussion) init ignores the SIG_DFL signals but we queue them anyway, including SIGKILL. This is mostly OK, the signal will be dropped silently when dequeued, but the pending SIGKILL has 2 bad implications: - it implies fatal_signal_pending(), so we confuse things like wait_for_completion_killable/lock_page_killable. - for the sub-namespace inits, the pending SIGKILL can mask (legacy_queue) the subsequent SIGKILL from the parent namespace which must kill cinit reliably. (preparation, cinits don't have SIGNAL_UNKILLABLE yet) The patch can't help when init is ptraced, but ptracing of init is not "safe" anyway. Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Acked-by: Roland McGrath <roland@redhat.com> Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Daniel Lezcano <daniel.lezcano@free.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 23:58:02 +00:00
{
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* Blocked signals are never ignored, since the
* signal handler may change by the time it is
* unblocked.
*/
sigwait eats blocked default-ignore signals While a signal is blocked, it must be posted even if its action is SIG_IGN or is SIG_DFL with the default action to ignore. This works right most of the time, but is broken when a sigwait (rt_sigtimedwait) is in progress. This changes the early-discard check to respect real_blocked. ~blocked is the set to check for "should wake up now", but ~(blocked|real_blocked) is the set for "blocked" semantics as defined by POSIX. This fixes bugzilla entry 9347, see http://bugzilla.kernel.org/show_bug.cgi?id=9347 Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-12 23:41:55 +00:00
if (sigismember(&t->blocked, sig) || sigismember(&t->real_blocked, sig))
signal: make sig_ignored() return bool sig_ignored() already behaves like a boolean function. Let's actually declare it as such too. Link: http://lkml.kernel.org/r/20180602103653.18181-10-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Morris <james.morris@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 05:00:23 +00:00
return false;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
tracehook: tracehook_consider_ignored_signal This defines tracehook_consider_ignored_signal() has a fine-grained hook for deciding to prevent the normal short-circuit of sending an ignored signal, as ptrace does. There is no change, only cleanup. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Reviewed-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 02:45:51 +00:00
/*
kernel/signal.c: protect the traced SIGNAL_UNKILLABLE tasks from SIGKILL The comment in sig_ignored() says "Tracers may want to know about even ignored signals" but SIGKILL can not be reported to debugger and it is just wrong to return 0 in this case: SIGKILL should only kill the SIGNAL_UNKILLABLE task if it comes from the parent ns. Change sig_ignored() to ignore ->ptrace if sig == SIGKILL and rely on sig_task_ignored(). SISGTOP coming from within the namespace is not really right too but at least debugger can intercept it, and we can't drop it here because this will break "gdb -p 1": ptrace_attach() won't work. Perhaps we will add another ->ptrace check later, we will see. Link: http://lkml.kernel.org/r/20171103184206.GB21036@redhat.com Signed-off-by: Oleg Nesterov <oleg@redhat.com> Tested-by: Kyle Huey <me@kylehuey.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-17 23:30:01 +00:00
* Tracers may want to know about even ignored signal unless it
* is SIGKILL which can't be reported anyway but can be ignored
* by SIGNAL_UNKILLABLE task.
tracehook: tracehook_consider_ignored_signal This defines tracehook_consider_ignored_signal() has a fine-grained hook for deciding to prevent the normal short-circuit of sending an ignored signal, as ptrace does. There is no change, only cleanup. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Reviewed-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 02:45:51 +00:00
*/
kernel/signal.c: protect the traced SIGNAL_UNKILLABLE tasks from SIGKILL The comment in sig_ignored() says "Tracers may want to know about even ignored signals" but SIGKILL can not be reported to debugger and it is just wrong to return 0 in this case: SIGKILL should only kill the SIGNAL_UNKILLABLE task if it comes from the parent ns. Change sig_ignored() to ignore ->ptrace if sig == SIGKILL and rely on sig_task_ignored(). SISGTOP coming from within the namespace is not really right too but at least debugger can intercept it, and we can't drop it here because this will break "gdb -p 1": ptrace_attach() won't work. Perhaps we will add another ->ptrace check later, we will see. Link: http://lkml.kernel.org/r/20171103184206.GB21036@redhat.com Signed-off-by: Oleg Nesterov <oleg@redhat.com> Tested-by: Kyle Huey <me@kylehuey.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-17 23:30:01 +00:00
if (t->ptrace && sig != SIGKILL)
signal: make sig_ignored() return bool sig_ignored() already behaves like a boolean function. Let's actually declare it as such too. Link: http://lkml.kernel.org/r/20180602103653.18181-10-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Morris <james.morris@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 05:00:23 +00:00
return false;
kernel/signal.c: protect the traced SIGNAL_UNKILLABLE tasks from SIGKILL The comment in sig_ignored() says "Tracers may want to know about even ignored signals" but SIGKILL can not be reported to debugger and it is just wrong to return 0 in this case: SIGKILL should only kill the SIGNAL_UNKILLABLE task if it comes from the parent ns. Change sig_ignored() to ignore ->ptrace if sig == SIGKILL and rely on sig_task_ignored(). SISGTOP coming from within the namespace is not really right too but at least debugger can intercept it, and we can't drop it here because this will break "gdb -p 1": ptrace_attach() won't work. Perhaps we will add another ->ptrace check later, we will see. Link: http://lkml.kernel.org/r/20171103184206.GB21036@redhat.com Signed-off-by: Oleg Nesterov <oleg@redhat.com> Tested-by: Kyle Huey <me@kylehuey.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-17 23:30:01 +00:00
return sig_task_ignored(t, sig, force);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
/*
* Re-calculate pending state from the set of locally pending
* signals, globally pending signals, and blocked signals.
*/
signal: make has_pending_signals() return bool has_pending_signals() already behaves like a boolean function. Let's actually declare it as such too. Link: http://lkml.kernel.org/r/20180602103653.18181-11-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Morris <james.morris@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 05:00:27 +00:00
static inline bool has_pending_signals(sigset_t *signal, sigset_t *blocked)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
unsigned long ready;
long i;
switch (_NSIG_WORDS) {
default:
for (i = _NSIG_WORDS, ready = 0; --i >= 0 ;)
ready |= signal->sig[i] &~ blocked->sig[i];
break;
case 4: ready = signal->sig[3] &~ blocked->sig[3];
ready |= signal->sig[2] &~ blocked->sig[2];
ready |= signal->sig[1] &~ blocked->sig[1];
ready |= signal->sig[0] &~ blocked->sig[0];
break;
case 2: ready = signal->sig[1] &~ blocked->sig[1];
ready |= signal->sig[0] &~ blocked->sig[0];
break;
case 1: ready = signal->sig[0] &~ blocked->sig[0];
}
return ready != 0;
}
#define PENDING(p,b) has_pending_signals(&(p)->signal, (b))
signal: make recalc_sigpending_tsk() return bool recalc_sigpending_tsk() already behaves like a boolean function. Let's actually declare it as such too. Link: http://lkml.kernel.org/r/20180602103653.18181-12-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Morris <james.morris@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 05:00:30 +00:00
static bool recalc_sigpending_tsk(struct task_struct *t)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
cgroup: cgroup v2 freezer Cgroup v1 implements the freezer controller, which provides an ability to stop the workload in a cgroup and temporarily free up some resources (cpu, io, network bandwidth and, potentially, memory) for some other tasks. Cgroup v2 lacks this functionality. This patch implements freezer for cgroup v2. Cgroup v2 freezer tries to put tasks into a state similar to jobctl stop. This means that tasks can be killed, ptraced (using PTRACE_SEIZE*), and interrupted. It is possible to attach to a frozen task, get some information (e.g. read registers) and detach. It's also possible to migrate a frozen tasks to another cgroup. This differs cgroup v2 freezer from cgroup v1 freezer, which mostly tried to imitate the system-wide freezer. However uninterruptible sleep is fine when all tasks are going to be frozen (hibernation case), it's not the acceptable state for some subset of the system. Cgroup v2 freezer is not supporting freezing kthreads. If a non-root cgroup contains kthread, the cgroup still can be frozen, but the kthread will remain running, the cgroup will be shown as non-frozen, and the notification will not be delivered. * PTRACE_ATTACH is not working because non-fatal signal delivery is blocked in frozen state. There are some interface differences between cgroup v1 and cgroup v2 freezer too, which are required to conform the cgroup v2 interface design principles: 1) There is no separate controller, which has to be turned on: the functionality is always available and is represented by cgroup.freeze and cgroup.events cgroup control files. 2) The desired state is defined by the cgroup.freeze control file. Any hierarchical configuration is allowed. 3) The interface is asynchronous. The actual state is available using cgroup.events control file ("frozen" field). There are no dedicated transitional states. 4) It's allowed to make any changes with the cgroup hierarchy (create new cgroups, remove old cgroups, move tasks between cgroups) no matter if some cgroups are frozen. Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org> No-objection-from-me-by: Oleg Nesterov <oleg@redhat.com> Cc: kernel-team@fb.com
2019-04-19 17:03:04 +00:00
if ((t->jobctl & (JOBCTL_PENDING_MASK | JOBCTL_TRAP_FREEZE)) ||
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
PENDING(&t->pending, &t->blocked) ||
cgroup: cgroup v2 freezer Cgroup v1 implements the freezer controller, which provides an ability to stop the workload in a cgroup and temporarily free up some resources (cpu, io, network bandwidth and, potentially, memory) for some other tasks. Cgroup v2 lacks this functionality. This patch implements freezer for cgroup v2. Cgroup v2 freezer tries to put tasks into a state similar to jobctl stop. This means that tasks can be killed, ptraced (using PTRACE_SEIZE*), and interrupted. It is possible to attach to a frozen task, get some information (e.g. read registers) and detach. It's also possible to migrate a frozen tasks to another cgroup. This differs cgroup v2 freezer from cgroup v1 freezer, which mostly tried to imitate the system-wide freezer. However uninterruptible sleep is fine when all tasks are going to be frozen (hibernation case), it's not the acceptable state for some subset of the system. Cgroup v2 freezer is not supporting freezing kthreads. If a non-root cgroup contains kthread, the cgroup still can be frozen, but the kthread will remain running, the cgroup will be shown as non-frozen, and the notification will not be delivered. * PTRACE_ATTACH is not working because non-fatal signal delivery is blocked in frozen state. There are some interface differences between cgroup v1 and cgroup v2 freezer too, which are required to conform the cgroup v2 interface design principles: 1) There is no separate controller, which has to be turned on: the functionality is always available and is represented by cgroup.freeze and cgroup.events cgroup control files. 2) The desired state is defined by the cgroup.freeze control file. Any hierarchical configuration is allowed. 3) The interface is asynchronous. The actual state is available using cgroup.events control file ("frozen" field). There are no dedicated transitional states. 4) It's allowed to make any changes with the cgroup hierarchy (create new cgroups, remove old cgroups, move tasks between cgroups) no matter if some cgroups are frozen. Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org> No-objection-from-me-by: Oleg Nesterov <oleg@redhat.com> Cc: kernel-team@fb.com
2019-04-19 17:03:04 +00:00
PENDING(&t->signal->shared_pending, &t->blocked) ||
cgroup_task_frozen(t)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
set_tsk_thread_flag(t, TIF_SIGPENDING);
signal: make recalc_sigpending_tsk() return bool recalc_sigpending_tsk() already behaves like a boolean function. Let's actually declare it as such too. Link: http://lkml.kernel.org/r/20180602103653.18181-12-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Morris <james.morris@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 05:00:30 +00:00
return true;
recalc_sigpending_tsk fixes Steve Hawkes discovered a problem where recalc_sigpending_tsk was called in do_sigaction but no signal_wake_up call was made, preventing later signals from waking up blocked threads with TIF_SIGPENDING already set. In fact, the few other calls to recalc_sigpending_tsk outside the signals code are also subject to this problem in other race conditions. This change makes recalc_sigpending_tsk private to the signals code. It changes the outside calls, as well as do_sigaction, to use the new recalc_sigpending_and_wake instead. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: <Steve.Hawkes@motorola.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-23 20:57:44 +00:00
}
signal: make recalc_sigpending_tsk() return bool recalc_sigpending_tsk() already behaves like a boolean function. Let's actually declare it as such too. Link: http://lkml.kernel.org/r/20180602103653.18181-12-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Morris <james.morris@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 05:00:30 +00:00
Restrict clearing TIF_SIGPENDING This patch should get a few birds. It prevents sigaction calls from clearing TIF_SIGPENDING in other threads, which could leak -ERESTART*. And It fixes ptrace_stop not to clear it, which done at the syscall exit stop could leak -ERESTART*. It probably removes the harm from signalfd, at least assuming it never calls dequeue_signal on kernel threads that might have used block_all_signals. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-06 10:59:00 +00:00
/*
* We must never clear the flag in another thread, or in current
* when it's possible the current syscall is returning -ERESTART*.
* So we don't clear it here, and only callers who know they should do.
*/
signal: make recalc_sigpending_tsk() return bool recalc_sigpending_tsk() already behaves like a boolean function. Let's actually declare it as such too. Link: http://lkml.kernel.org/r/20180602103653.18181-12-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Morris <james.morris@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 05:00:30 +00:00
return false;
recalc_sigpending_tsk fixes Steve Hawkes discovered a problem where recalc_sigpending_tsk was called in do_sigaction but no signal_wake_up call was made, preventing later signals from waking up blocked threads with TIF_SIGPENDING already set. In fact, the few other calls to recalc_sigpending_tsk outside the signals code are also subject to this problem in other race conditions. This change makes recalc_sigpending_tsk private to the signals code. It changes the outside calls, as well as do_sigaction, to use the new recalc_sigpending_and_wake instead. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: <Steve.Hawkes@motorola.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-23 20:57:44 +00:00
}
/*
* After recalculating TIF_SIGPENDING, we need to make sure the task wakes up.
* This is superfluous when called on current, the wakeup is a harmless no-op.
*/
void recalc_sigpending_and_wake(struct task_struct *t)
{
if (recalc_sigpending_tsk(t))
signal_wake_up(t, 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
void recalc_sigpending(void)
{
livepatch: send a fake signal to all blocking tasks Live patching consistency model is of LEAVE_PATCHED_SET and SWITCH_THREAD. This means that all tasks in the system have to be marked one by one as safe to call a new patched function. Safe means when a task is not (sleeping) in a set of patched functions. That is, no patched function is on the task's stack. Another clearly safe place is the boundary between kernel and userspace. The patching waits for all tasks to get outside of the patched set or to cross the boundary. The transition is completed afterwards. The problem is that a task can block the transition for quite a long time, if not forever. It could sleep in a set of patched functions, for example. Luckily we can force the task to leave the set by sending it a fake signal, that is a signal with no data in signal pending structures (no handler, no sign of proper signal delivered). Suspend/freezer use this to freeze the tasks as well. The task gets TIF_SIGPENDING set and is woken up (if it has been sleeping in the kernel before) or kicked by rescheduling IPI (if it was running on other CPU). This causes the task to go to kernel/userspace boundary where the signal would be handled and the task would be marked as safe in terms of live patching. There are tasks which are not affected by this technique though. The fake signal is not sent to kthreads. They should be handled differently. They can be woken up so they leave the patched set and their TIF_PATCH_PENDING can be cleared thanks to stack checking. For the sake of completeness, if the task is in TASK_RUNNING state but not currently running on some CPU it doesn't get the IPI, but it would eventually handle the signal anyway. Second, if the task runs in the kernel (in TASK_RUNNING state) it gets the IPI, but the signal is not handled on return from the interrupt. It would be handled on return to the userspace in the future when the fake signal is sent again. Stack checking deals with these cases in a better way. If the task was sleeping in a syscall it would be woken by our fake signal, it would check if TIF_SIGPENDING is set (by calling signal_pending() predicate) and return ERESTART* or EINTR. Syscalls with ERESTART* return values are restarted in case of the fake signal (see do_signal()). EINTR is propagated back to the userspace program. This could disturb the program, but... * each process dealing with signals should react accordingly to EINTR return values. * syscalls returning EINTR happen to be quite common situation in the system even if no fake signal is sent. * freezer sends the fake signal and does not deal with EINTR anyhow. Thus EINTR values are returned when the system is resumed. The very safe marking is done in architectures' "entry" on syscall and interrupt/exception exit paths, and in a stack checking functions of livepatch. TIF_PATCH_PENDING is cleared and the next recalc_sigpending() drops TIF_SIGPENDING. In connection with this, also call klp_update_patch_state() before do_signal(), so that recalc_sigpending() in dequeue_signal() can clear TIF_PATCH_PENDING immediately and thus prevent a double call of do_signal(). Note that the fake signal is not sent to stopped/traced tasks. Such task prevents the patching to finish till it continues again (is not traced anymore). Last, sending the fake signal is not automatic. It is done only when admin requests it by writing 1 to signal sysfs attribute in livepatch sysfs directory. Signed-off-by: Miroslav Benes <mbenes@suse.cz> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: linuxppc-dev@lists.ozlabs.org Cc: x86@kernel.org Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-15 13:50:13 +00:00
if (!recalc_sigpending_tsk(current) && !freezing(current) &&
!klp_patch_pending(current))
Restrict clearing TIF_SIGPENDING This patch should get a few birds. It prevents sigaction calls from clearing TIF_SIGPENDING in other threads, which could leak -ERESTART*. And It fixes ptrace_stop not to clear it, which done at the syscall exit stop could leak -ERESTART*. It probably removes the harm from signalfd, at least assuming it never calls dequeue_signal on kernel threads that might have used block_all_signals. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-06 10:59:00 +00:00
clear_thread_flag(TIF_SIGPENDING);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
signal: Pair exports with their functions For readability and consistency with the other exports in kernel/signal.c pair the exports of signal sending functions with their functions, instead of having the exports in one big clump. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-13 17:26:35 +00:00
EXPORT_SYMBOL(recalc_sigpending);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
signal: Add calculate_sigpending() Add a function calculate_sigpending to test to see if any signals are pending for a new task immediately following fork. Signals have to happen either before or after fork. Today our practice is to push all of the signals to before the fork, but that has the downside that frequent or periodic signals can make fork take much much longer than normal or prevent fork from completing entirely. So we need move signals that we can after the fork to prevent that. This updates the code to set TIF_SIGPENDING on a new task if there are signals or other activities that have moved so that they appear to happen after the fork. As the code today restarts if it sees any such activity this won't immediately have an effect, as there will be no reason for it to set TIF_SIGPENDING immediately after the fork. Adding calculate_sigpending means the code in fork can safely be changed to not always restart if a signal is pending. The new calculate_sigpending function sets sigpending if there are pending bits in jobctl, pending signals, the freezer needs to freeze the new task or the live kernel patching framework need the new thread to take the slow path to userspace. I have verified that setting TIF_SIGPENDING does make a new process take the slow path to userspace before it executes it's first userspace instruction. I have looked at the callers of signal_wake_up and the code paths setting TIF_SIGPENDING and I don't see anything else that needs to be handled. The code probably doesn't need to set TIF_SIGPENDING for the kernel live patching as it uses a separate thread flag as well. But at this point it seems safer reuse the recalc_sigpending logic and get the kernel live patching folks to sort out their story later. V2: I have moved the test into schedule_tail where siglock can be grabbed and recalc_sigpending can be reused directly. Further as the last action of setting up a new task this guarantees that TIF_SIGPENDING will be properly set in the new process. The helper calculate_sigpending takes the siglock and uncontitionally sets TIF_SIGPENDING and let's recalc_sigpending clear TIF_SIGPENDING if it is unnecessary. This allows reusing the existing code and keeps maintenance of the conditions simple. Oleg Nesterov <oleg@redhat.com> suggested the movement and pointed out the need to take siglock if this code was going to be called while the new task is discoverable. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-07-23 22:26:49 +00:00
void calculate_sigpending(void)
{
/* Have any signals or users of TIF_SIGPENDING been delayed
* until after fork?
*/
spin_lock_irq(&current->sighand->siglock);
set_tsk_thread_flag(current, TIF_SIGPENDING);
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Given the mask, find the first available signal that should be serviced. */
Prioritize synchronous signals over 'normal' signals This makes sure that we pick the synchronous signals caused by a processor fault over any pending regular asynchronous signals sent to use by [t]kill(). This is not strictly required semantics, but it makes it _much_ easier for programs like Wine that expect to find the fault information in the signal stack. Without this, if a non-synchronous signal gets picked first, the delayed asynchronous signal will have its signal context pointing to the new signal invocation, rather than the instruction that caused the SIGSEGV or SIGBUS in the first place. This is not all that pretty, and we're discussing making the synchronous signals more explicit rather than have these kinds of implicit preferences of SIGSEGV and friends. See for example http://bugzilla.kernel.org/show_bug.cgi?id=15395 for some of the discussion. But in the meantime this is a simple and fairly straightforward work-around, and the whole if (x & Y) x &= Y; thing can be compiled into (and gcc does do it) just three instructions: movq %rdx, %rax andl $Y, %eax cmovne %rax, %rdx so it is at least a simple solution to a subtle issue. Reported-and-tested-by: Pavel Vilim <wylda@volny.cz> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-02 16:36:46 +00:00
#define SYNCHRONOUS_MASK \
(sigmask(SIGSEGV) | sigmask(SIGBUS) | sigmask(SIGILL) | \
signal, x86: add SIGSYS info and make it synchronous. This change enables SIGSYS, defines _sigfields._sigsys, and adds x86 (compat) arch support. _sigsys defines fields which allow a signal handler to receive the triggering system call number, the relevant AUDIT_ARCH_* value for that number, and the address of the callsite. SIGSYS is added to the SYNCHRONOUS_MASK because it is desirable for it to have setup_frame() called for it. The goal is to ensure that ucontext_t reflects the machine state from the time-of-syscall and not from another signal handler. The first consumer of SIGSYS would be seccomp filter. In particular, a filter program could specify a new return value, SECCOMP_RET_TRAP, which would result in the system call being denied and the calling thread signaled. This also means that implementing arch-specific support can be dependent upon HAVE_ARCH_SECCOMP_FILTER. Suggested-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: H. Peter Anvin <hpa@zytor.com> Acked-by: Eric Paris <eparis@redhat.com> v18: - added acked by, rebase v17: - rebase and reviewed-by addition v14: - rebase/nochanges v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - reworded changelog (oleg@redhat.com) v11: - fix dropped words in the change description - added fallback copy_siginfo support. - added __ARCH_SIGSYS define to allow stepped arch support. v10: - first version based on suggestion Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:48:00 +00:00
sigmask(SIGTRAP) | sigmask(SIGFPE) | sigmask(SIGSYS))
Prioritize synchronous signals over 'normal' signals This makes sure that we pick the synchronous signals caused by a processor fault over any pending regular asynchronous signals sent to use by [t]kill(). This is not strictly required semantics, but it makes it _much_ easier for programs like Wine that expect to find the fault information in the signal stack. Without this, if a non-synchronous signal gets picked first, the delayed asynchronous signal will have its signal context pointing to the new signal invocation, rather than the instruction that caused the SIGSEGV or SIGBUS in the first place. This is not all that pretty, and we're discussing making the synchronous signals more explicit rather than have these kinds of implicit preferences of SIGSEGV and friends. See for example http://bugzilla.kernel.org/show_bug.cgi?id=15395 for some of the discussion. But in the meantime this is a simple and fairly straightforward work-around, and the whole if (x & Y) x &= Y; thing can be compiled into (and gcc does do it) just three instructions: movq %rdx, %rax andl $Y, %eax cmovne %rax, %rdx so it is at least a simple solution to a subtle issue. Reported-and-tested-by: Pavel Vilim <wylda@volny.cz> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-02 16:36:46 +00:00
signal/timer/event: signalfd core This patch series implements the new signalfd() system call. I took part of the original Linus code (and you know how badly it can be broken :), and I added even more breakage ;) Signals are fetched from the same signal queue used by the process, so signalfd will compete with standard kernel delivery in dequeue_signal(). If you want to reliably fetch signals on the signalfd file, you need to block them with sigprocmask(SIG_BLOCK). This seems to be working fine on my Dual Opteron machine. I made a quick test program for it: http://www.xmailserver.org/signafd-test.c The signalfd() system call implements signal delivery into a file descriptor receiver. The signalfd file descriptor if created with the following API: int signalfd(int ufd, const sigset_t *mask, size_t masksize); The "ufd" parameter allows to change an existing signalfd sigmask, w/out going to close/create cycle (Linus idea). Use "ufd" == -1 if you want a brand new signalfd file. The "mask" allows to specify the signal mask of signals that we are interested in. The "masksize" parameter is the size of "mask". The signalfd fd supports the poll(2) and read(2) system calls. The poll(2) will return POLLIN when signals are available to be dequeued. As a direct consequence of supporting the Linux poll subsystem, the signalfd fd can use used together with epoll(2) too. The read(2) system call will return a "struct signalfd_siginfo" structure in the userspace supplied buffer. The return value is the number of bytes copied in the supplied buffer, or -1 in case of error. The read(2) call can also return 0, in case the sighand structure to which the signalfd was attached, has been orphaned. The O_NONBLOCK flag is also supported, and read(2) will return -EAGAIN in case no signal is available. If the size of the buffer passed to read(2) is lower than sizeof(struct signalfd_siginfo), -EINVAL is returned. A read from the signalfd can also return -ERESTARTSYS in case a signal hits the process. The format of the struct signalfd_siginfo is, and the valid fields depends of the (->code & __SI_MASK) value, in the same way a struct siginfo would: struct signalfd_siginfo { __u32 signo; /* si_signo */ __s32 err; /* si_errno */ __s32 code; /* si_code */ __u32 pid; /* si_pid */ __u32 uid; /* si_uid */ __s32 fd; /* si_fd */ __u32 tid; /* si_fd */ __u32 band; /* si_band */ __u32 overrun; /* si_overrun */ __u32 trapno; /* si_trapno */ __s32 status; /* si_status */ __s32 svint; /* si_int */ __u64 svptr; /* si_ptr */ __u64 utime; /* si_utime */ __u64 stime; /* si_stime */ __u64 addr; /* si_addr */ }; [akpm@linux-foundation.org: fix signalfd_copyinfo() on i386] Signed-off-by: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11 05:23:13 +00:00
int next_signal(struct sigpending *pending, sigset_t *mask)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
unsigned long i, *s, *m, x;
int sig = 0;
signal: Print warning message when dropping signals When the system has too many timers or too many aggregate queued signals, the EAGAIN error is returned to application from kernel, including timer_create() [POSIX.1b]. It means that the app exceeded the limit of pending signals, but in general application writers do not expect this outcome and the current silent failure can cause rare app failures under very high load. This patch adds a new message when we reach the limit and if print_fatal_signals is enabled: task/1234: reached RLIMIT_SIGPENDING, dropping signal If you see this message and your system behaved unexpectedly, you can run following command to lift the limit: # ulimit -i unlimited With help from Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>. Signed-off-by: Naohiro Ooiwa <nooiwa@miraclelinux.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Cc: Roland McGrath <roland@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: oleg@redhat.com LKML-Reference: <4AF6E7E2.9080406@miraclelinux.com> [ Modified a few small details, gave surrounding code some love. ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-08 15:46:42 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
s = pending->signal.sig;
m = mask->sig;
Prioritize synchronous signals over 'normal' signals This makes sure that we pick the synchronous signals caused by a processor fault over any pending regular asynchronous signals sent to use by [t]kill(). This is not strictly required semantics, but it makes it _much_ easier for programs like Wine that expect to find the fault information in the signal stack. Without this, if a non-synchronous signal gets picked first, the delayed asynchronous signal will have its signal context pointing to the new signal invocation, rather than the instruction that caused the SIGSEGV or SIGBUS in the first place. This is not all that pretty, and we're discussing making the synchronous signals more explicit rather than have these kinds of implicit preferences of SIGSEGV and friends. See for example http://bugzilla.kernel.org/show_bug.cgi?id=15395 for some of the discussion. But in the meantime this is a simple and fairly straightforward work-around, and the whole if (x & Y) x &= Y; thing can be compiled into (and gcc does do it) just three instructions: movq %rdx, %rax andl $Y, %eax cmovne %rax, %rdx so it is at least a simple solution to a subtle issue. Reported-and-tested-by: Pavel Vilim <wylda@volny.cz> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-02 16:36:46 +00:00
/*
* Handle the first word specially: it contains the
* synchronous signals that need to be dequeued first.
*/
x = *s &~ *m;
if (x) {
if (x & SYNCHRONOUS_MASK)
x &= SYNCHRONOUS_MASK;
sig = ffz(~x) + 1;
return sig;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
switch (_NSIG_WORDS) {
default:
Prioritize synchronous signals over 'normal' signals This makes sure that we pick the synchronous signals caused by a processor fault over any pending regular asynchronous signals sent to use by [t]kill(). This is not strictly required semantics, but it makes it _much_ easier for programs like Wine that expect to find the fault information in the signal stack. Without this, if a non-synchronous signal gets picked first, the delayed asynchronous signal will have its signal context pointing to the new signal invocation, rather than the instruction that caused the SIGSEGV or SIGBUS in the first place. This is not all that pretty, and we're discussing making the synchronous signals more explicit rather than have these kinds of implicit preferences of SIGSEGV and friends. See for example http://bugzilla.kernel.org/show_bug.cgi?id=15395 for some of the discussion. But in the meantime this is a simple and fairly straightforward work-around, and the whole if (x & Y) x &= Y; thing can be compiled into (and gcc does do it) just three instructions: movq %rdx, %rax andl $Y, %eax cmovne %rax, %rdx so it is at least a simple solution to a subtle issue. Reported-and-tested-by: Pavel Vilim <wylda@volny.cz> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-02 16:36:46 +00:00
for (i = 1; i < _NSIG_WORDS; ++i) {
x = *++s &~ *++m;
if (!x)
continue;
sig = ffz(~x) + i*_NSIG_BPW + 1;
break;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
break;
Prioritize synchronous signals over 'normal' signals This makes sure that we pick the synchronous signals caused by a processor fault over any pending regular asynchronous signals sent to use by [t]kill(). This is not strictly required semantics, but it makes it _much_ easier for programs like Wine that expect to find the fault information in the signal stack. Without this, if a non-synchronous signal gets picked first, the delayed asynchronous signal will have its signal context pointing to the new signal invocation, rather than the instruction that caused the SIGSEGV or SIGBUS in the first place. This is not all that pretty, and we're discussing making the synchronous signals more explicit rather than have these kinds of implicit preferences of SIGSEGV and friends. See for example http://bugzilla.kernel.org/show_bug.cgi?id=15395 for some of the discussion. But in the meantime this is a simple and fairly straightforward work-around, and the whole if (x & Y) x &= Y; thing can be compiled into (and gcc does do it) just three instructions: movq %rdx, %rax andl $Y, %eax cmovne %rax, %rdx so it is at least a simple solution to a subtle issue. Reported-and-tested-by: Pavel Vilim <wylda@volny.cz> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-02 16:36:46 +00:00
case 2:
x = s[1] &~ m[1];
if (!x)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
break;
Prioritize synchronous signals over 'normal' signals This makes sure that we pick the synchronous signals caused by a processor fault over any pending regular asynchronous signals sent to use by [t]kill(). This is not strictly required semantics, but it makes it _much_ easier for programs like Wine that expect to find the fault information in the signal stack. Without this, if a non-synchronous signal gets picked first, the delayed asynchronous signal will have its signal context pointing to the new signal invocation, rather than the instruction that caused the SIGSEGV or SIGBUS in the first place. This is not all that pretty, and we're discussing making the synchronous signals more explicit rather than have these kinds of implicit preferences of SIGSEGV and friends. See for example http://bugzilla.kernel.org/show_bug.cgi?id=15395 for some of the discussion. But in the meantime this is a simple and fairly straightforward work-around, and the whole if (x & Y) x &= Y; thing can be compiled into (and gcc does do it) just three instructions: movq %rdx, %rax andl $Y, %eax cmovne %rax, %rdx so it is at least a simple solution to a subtle issue. Reported-and-tested-by: Pavel Vilim <wylda@volny.cz> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-02 16:36:46 +00:00
sig = ffz(~x) + _NSIG_BPW + 1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
break;
Prioritize synchronous signals over 'normal' signals This makes sure that we pick the synchronous signals caused by a processor fault over any pending regular asynchronous signals sent to use by [t]kill(). This is not strictly required semantics, but it makes it _much_ easier for programs like Wine that expect to find the fault information in the signal stack. Without this, if a non-synchronous signal gets picked first, the delayed asynchronous signal will have its signal context pointing to the new signal invocation, rather than the instruction that caused the SIGSEGV or SIGBUS in the first place. This is not all that pretty, and we're discussing making the synchronous signals more explicit rather than have these kinds of implicit preferences of SIGSEGV and friends. See for example http://bugzilla.kernel.org/show_bug.cgi?id=15395 for some of the discussion. But in the meantime this is a simple and fairly straightforward work-around, and the whole if (x & Y) x &= Y; thing can be compiled into (and gcc does do it) just three instructions: movq %rdx, %rax andl $Y, %eax cmovne %rax, %rdx so it is at least a simple solution to a subtle issue. Reported-and-tested-by: Pavel Vilim <wylda@volny.cz> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-02 16:36:46 +00:00
case 1:
/* Nothing to do */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
break;
}
signal: Print warning message when dropping signals When the system has too many timers or too many aggregate queued signals, the EAGAIN error is returned to application from kernel, including timer_create() [POSIX.1b]. It means that the app exceeded the limit of pending signals, but in general application writers do not expect this outcome and the current silent failure can cause rare app failures under very high load. This patch adds a new message when we reach the limit and if print_fatal_signals is enabled: task/1234: reached RLIMIT_SIGPENDING, dropping signal If you see this message and your system behaved unexpectedly, you can run following command to lift the limit: # ulimit -i unlimited With help from Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>. Signed-off-by: Naohiro Ooiwa <nooiwa@miraclelinux.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Cc: Roland McGrath <roland@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: oleg@redhat.com LKML-Reference: <4AF6E7E2.9080406@miraclelinux.com> [ Modified a few small details, gave surrounding code some love. ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-08 15:46:42 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return sig;
}
signal: Print warning message when dropping signals When the system has too many timers or too many aggregate queued signals, the EAGAIN error is returned to application from kernel, including timer_create() [POSIX.1b]. It means that the app exceeded the limit of pending signals, but in general application writers do not expect this outcome and the current silent failure can cause rare app failures under very high load. This patch adds a new message when we reach the limit and if print_fatal_signals is enabled: task/1234: reached RLIMIT_SIGPENDING, dropping signal If you see this message and your system behaved unexpectedly, you can run following command to lift the limit: # ulimit -i unlimited With help from Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>. Signed-off-by: Naohiro Ooiwa <nooiwa@miraclelinux.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Cc: Roland McGrath <roland@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: oleg@redhat.com LKML-Reference: <4AF6E7E2.9080406@miraclelinux.com> [ Modified a few small details, gave surrounding code some love. ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-08 15:46:42 +00:00
static inline void print_dropped_signal(int sig)
{
static DEFINE_RATELIMIT_STATE(ratelimit_state, 5 * HZ, 10);
if (!print_fatal_signals)
return;
if (!__ratelimit(&ratelimit_state))
return;
kernel/signal.c: convert printk(KERN_<LEVEL> ...) to pr_<level>(...) Use pr_<level> instead of printk(KERN_<LEVEL> ). Signed-off-by: Wang Xiaoqiang <wangxq10@lzu.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-23 23:23:59 +00:00
pr_info("%s/%d: reached RLIMIT_SIGPENDING, dropped signal %d\n",
signal: Print warning message when dropping signals When the system has too many timers or too many aggregate queued signals, the EAGAIN error is returned to application from kernel, including timer_create() [POSIX.1b]. It means that the app exceeded the limit of pending signals, but in general application writers do not expect this outcome and the current silent failure can cause rare app failures under very high load. This patch adds a new message when we reach the limit and if print_fatal_signals is enabled: task/1234: reached RLIMIT_SIGPENDING, dropping signal If you see this message and your system behaved unexpectedly, you can run following command to lift the limit: # ulimit -i unlimited With help from Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>. Signed-off-by: Naohiro Ooiwa <nooiwa@miraclelinux.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Cc: Roland McGrath <roland@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: oleg@redhat.com LKML-Reference: <4AF6E7E2.9080406@miraclelinux.com> [ Modified a few small details, gave surrounding code some love. ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-08 15:46:42 +00:00
current->comm, current->pid, sig);
}
ptrace: Clean transitions between TASK_STOPPED and TRACED Currently, if the task is STOPPED on ptrace attach, it's left alone and the state is silently changed to TRACED on the next ptrace call. The behavior breaks the assumption that arch_ptrace_stop() is called before any task is poked by ptrace and is ugly in that a task manipulates the state of another task directly. With GROUP_STOP_PENDING, the transitions between TASK_STOPPED and TRACED can be made clean. The tracer can use the flag to tell the tracee to retry stop on attach and detach. On retry, the tracee will enter the desired state in the correct way. The lower 16bits of task->group_stop is used to remember the signal number which caused the last group stop. This is used while retrying for ptrace attach as the original group_exit_code could have been consumed with wait(2) by then. As the real parent may wait(2) and consume the group_exit_code anytime, the group_exit_code needs to be saved separately so that it can be used when switching from regular sleep to ptrace_stop(). This is recorded in the lower 16bits of task->group_stop. If a task is already stopped and there's no intervening SIGCONT, a ptrace request immediately following a successful PTRACE_ATTACH should always succeed even if the tracer doesn't wait(2) for attach completion; however, with this change, the tracee might still be TASK_RUNNING trying to enter TASK_TRACED which would cause the following request to fail with -ESRCH. This intermediate state is hidden from the ptracer by setting GROUP_STOP_TRAPPING on attach and making ptrace_check_attach() wait for it to clear on its signal->wait_chldexit. Completing the transition or getting killed clears TRAPPING and wakes up the tracer. Note that the STOPPED -> RUNNING -> TRACED transition is still visible to other threads which are in the same group as the ptracer and the reverse transition is visible to all. Please read the comments for details. Oleg: * Spotted a race condition where a task may retry group stop without proper bookkeeping. Fixed by redoing bookkeeping on retry. * Spotted that the transition is visible to userland in several different ways. Most are fixed with GROUP_STOP_TRAPPING. Unhandled corner case is documented. * Pointed out not setting GROUP_STOP_SIGMASK on an already stopped task would result in more consistent behavior. * Pointed out that calling ptrace_stop() from do_signal_stop() in TASK_STOPPED can race with group stop start logic and then confuse the TRAPPING wait in ptrace_check_attach(). ptrace_stop() is now called with TASK_RUNNING. * Suggested using signal->wait_chldexit instead of bit wait. * Spotted a race condition between TRACED transition and clearing of TRAPPING. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
2011-03-23 09:37:00 +00:00
/**
job control: introduce task_set_jobctl_pending() task->jobctl currently hosts JOBCTL_STOP_PENDING and will host TRAP pending bits too. Setting pending conditions on a dying task may make the task unkillable. Currently, each setting site is responsible for checking for the condition but with to-be-added job control traps this becomes too fragile. This patch adds task_set_jobctl_pending() which should be used when setting task->jobctl bits to schedule a stop or trap. The function performs the followings to ease setting pending bits. * Sanity checks. * If fatal signal is pending or PF_EXITING is set, no bit is set. * STOP_SIGMASK is automatically cleared if new value is being set. do_signal_stop() and ptrace_attach() are updated to use task_set_jobctl_pending() instead of setting STOP_PENDING explicitly. The surrounding structures around setting are changed to fit task_set_jobctl_pending() better but there should be no userland visible behavior difference. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-02 09:14:00 +00:00
* task_set_jobctl_pending - set jobctl pending bits
ptrace: Clean transitions between TASK_STOPPED and TRACED Currently, if the task is STOPPED on ptrace attach, it's left alone and the state is silently changed to TRACED on the next ptrace call. The behavior breaks the assumption that arch_ptrace_stop() is called before any task is poked by ptrace and is ugly in that a task manipulates the state of another task directly. With GROUP_STOP_PENDING, the transitions between TASK_STOPPED and TRACED can be made clean. The tracer can use the flag to tell the tracee to retry stop on attach and detach. On retry, the tracee will enter the desired state in the correct way. The lower 16bits of task->group_stop is used to remember the signal number which caused the last group stop. This is used while retrying for ptrace attach as the original group_exit_code could have been consumed with wait(2) by then. As the real parent may wait(2) and consume the group_exit_code anytime, the group_exit_code needs to be saved separately so that it can be used when switching from regular sleep to ptrace_stop(). This is recorded in the lower 16bits of task->group_stop. If a task is already stopped and there's no intervening SIGCONT, a ptrace request immediately following a successful PTRACE_ATTACH should always succeed even if the tracer doesn't wait(2) for attach completion; however, with this change, the tracee might still be TASK_RUNNING trying to enter TASK_TRACED which would cause the following request to fail with -ESRCH. This intermediate state is hidden from the ptracer by setting GROUP_STOP_TRAPPING on attach and making ptrace_check_attach() wait for it to clear on its signal->wait_chldexit. Completing the transition or getting killed clears TRAPPING and wakes up the tracer. Note that the STOPPED -> RUNNING -> TRACED transition is still visible to other threads which are in the same group as the ptracer and the reverse transition is visible to all. Please read the comments for details. Oleg: * Spotted a race condition where a task may retry group stop without proper bookkeeping. Fixed by redoing bookkeeping on retry. * Spotted that the transition is visible to userland in several different ways. Most are fixed with GROUP_STOP_TRAPPING. Unhandled corner case is documented. * Pointed out not setting GROUP_STOP_SIGMASK on an already stopped task would result in more consistent behavior. * Pointed out that calling ptrace_stop() from do_signal_stop() in TASK_STOPPED can race with group stop start logic and then confuse the TRAPPING wait in ptrace_check_attach(). ptrace_stop() is now called with TASK_RUNNING. * Suggested using signal->wait_chldexit instead of bit wait. * Spotted a race condition between TRACED transition and clearing of TRAPPING. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
2011-03-23 09:37:00 +00:00
* @task: target task
job control: introduce task_set_jobctl_pending() task->jobctl currently hosts JOBCTL_STOP_PENDING and will host TRAP pending bits too. Setting pending conditions on a dying task may make the task unkillable. Currently, each setting site is responsible for checking for the condition but with to-be-added job control traps this becomes too fragile. This patch adds task_set_jobctl_pending() which should be used when setting task->jobctl bits to schedule a stop or trap. The function performs the followings to ease setting pending bits. * Sanity checks. * If fatal signal is pending or PF_EXITING is set, no bit is set. * STOP_SIGMASK is automatically cleared if new value is being set. do_signal_stop() and ptrace_attach() are updated to use task_set_jobctl_pending() instead of setting STOP_PENDING explicitly. The surrounding structures around setting are changed to fit task_set_jobctl_pending() better but there should be no userland visible behavior difference. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-02 09:14:00 +00:00
* @mask: pending bits to set
ptrace: Clean transitions between TASK_STOPPED and TRACED Currently, if the task is STOPPED on ptrace attach, it's left alone and the state is silently changed to TRACED on the next ptrace call. The behavior breaks the assumption that arch_ptrace_stop() is called before any task is poked by ptrace and is ugly in that a task manipulates the state of another task directly. With GROUP_STOP_PENDING, the transitions between TASK_STOPPED and TRACED can be made clean. The tracer can use the flag to tell the tracee to retry stop on attach and detach. On retry, the tracee will enter the desired state in the correct way. The lower 16bits of task->group_stop is used to remember the signal number which caused the last group stop. This is used while retrying for ptrace attach as the original group_exit_code could have been consumed with wait(2) by then. As the real parent may wait(2) and consume the group_exit_code anytime, the group_exit_code needs to be saved separately so that it can be used when switching from regular sleep to ptrace_stop(). This is recorded in the lower 16bits of task->group_stop. If a task is already stopped and there's no intervening SIGCONT, a ptrace request immediately following a successful PTRACE_ATTACH should always succeed even if the tracer doesn't wait(2) for attach completion; however, with this change, the tracee might still be TASK_RUNNING trying to enter TASK_TRACED which would cause the following request to fail with -ESRCH. This intermediate state is hidden from the ptracer by setting GROUP_STOP_TRAPPING on attach and making ptrace_check_attach() wait for it to clear on its signal->wait_chldexit. Completing the transition or getting killed clears TRAPPING and wakes up the tracer. Note that the STOPPED -> RUNNING -> TRACED transition is still visible to other threads which are in the same group as the ptracer and the reverse transition is visible to all. Please read the comments for details. Oleg: * Spotted a race condition where a task may retry group stop without proper bookkeeping. Fixed by redoing bookkeeping on retry. * Spotted that the transition is visible to userland in several different ways. Most are fixed with GROUP_STOP_TRAPPING. Unhandled corner case is documented. * Pointed out not setting GROUP_STOP_SIGMASK on an already stopped task would result in more consistent behavior. * Pointed out that calling ptrace_stop() from do_signal_stop() in TASK_STOPPED can race with group stop start logic and then confuse the TRAPPING wait in ptrace_check_attach(). ptrace_stop() is now called with TASK_RUNNING. * Suggested using signal->wait_chldexit instead of bit wait. * Spotted a race condition between TRACED transition and clearing of TRAPPING. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
2011-03-23 09:37:00 +00:00
*
job control: introduce task_set_jobctl_pending() task->jobctl currently hosts JOBCTL_STOP_PENDING and will host TRAP pending bits too. Setting pending conditions on a dying task may make the task unkillable. Currently, each setting site is responsible for checking for the condition but with to-be-added job control traps this becomes too fragile. This patch adds task_set_jobctl_pending() which should be used when setting task->jobctl bits to schedule a stop or trap. The function performs the followings to ease setting pending bits. * Sanity checks. * If fatal signal is pending or PF_EXITING is set, no bit is set. * STOP_SIGMASK is automatically cleared if new value is being set. do_signal_stop() and ptrace_attach() are updated to use task_set_jobctl_pending() instead of setting STOP_PENDING explicitly. The surrounding structures around setting are changed to fit task_set_jobctl_pending() better but there should be no userland visible behavior difference. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-02 09:14:00 +00:00
* Clear @mask from @task->jobctl. @mask must be subset of
* %JOBCTL_PENDING_MASK | %JOBCTL_STOP_CONSUME | %JOBCTL_STOP_SIGMASK |
* %JOBCTL_TRAPPING. If stop signo is being set, the existing signo is
* cleared. If @task is already being killed or exiting, this function
* becomes noop.
*
* CONTEXT:
* Must be called with @task->sighand->siglock held.
*
* RETURNS:
* %true if @mask is set, %false if made noop because @task was dying.
*/
signals, sched: Change all uses of JOBCTL_* from 'int' to 'long' c56fb6564dcd ("Fix a misaligned load inside ptrace_attach()") makes jobctl an "unsigned long". It makes sense to have the masks applied to it match that type. This is currently just a cosmetic change, but it will prevent the mask from being unexpectedly truncated if we ever end up with masks with more bits. One instance of "signr" is an int, but I left this alone because the mask ensures that it will never overflow. Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Chris Metcalf <cmetcalf@ezchip.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bobby.prani@gmail.com Cc: oleg@redhat.com Cc: paulmck@linux.vnet.ibm.com Cc: richard@nod.at Cc: vdavydov@parallels.com Link: http://lkml.kernel.org/r/1430453997-32459-4-git-send-email-palmer@dabbelt.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-01 04:19:57 +00:00
bool task_set_jobctl_pending(struct task_struct *task, unsigned long mask)
job control: introduce task_set_jobctl_pending() task->jobctl currently hosts JOBCTL_STOP_PENDING and will host TRAP pending bits too. Setting pending conditions on a dying task may make the task unkillable. Currently, each setting site is responsible for checking for the condition but with to-be-added job control traps this becomes too fragile. This patch adds task_set_jobctl_pending() which should be used when setting task->jobctl bits to schedule a stop or trap. The function performs the followings to ease setting pending bits. * Sanity checks. * If fatal signal is pending or PF_EXITING is set, no bit is set. * STOP_SIGMASK is automatically cleared if new value is being set. do_signal_stop() and ptrace_attach() are updated to use task_set_jobctl_pending() instead of setting STOP_PENDING explicitly. The surrounding structures around setting are changed to fit task_set_jobctl_pending() better but there should be no userland visible behavior difference. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-02 09:14:00 +00:00
{
BUG_ON(mask & ~(JOBCTL_PENDING_MASK | JOBCTL_STOP_CONSUME |
JOBCTL_STOP_SIGMASK | JOBCTL_TRAPPING));
BUG_ON((mask & JOBCTL_TRAPPING) && !(mask & JOBCTL_PENDING_MASK));
if (unlikely(fatal_signal_pending(task) || (task->flags & PF_EXITING)))
return false;
if (mask & JOBCTL_STOP_SIGMASK)
task->jobctl &= ~JOBCTL_STOP_SIGMASK;
task->jobctl |= mask;
return true;
}
ptrace: Clean transitions between TASK_STOPPED and TRACED Currently, if the task is STOPPED on ptrace attach, it's left alone and the state is silently changed to TRACED on the next ptrace call. The behavior breaks the assumption that arch_ptrace_stop() is called before any task is poked by ptrace and is ugly in that a task manipulates the state of another task directly. With GROUP_STOP_PENDING, the transitions between TASK_STOPPED and TRACED can be made clean. The tracer can use the flag to tell the tracee to retry stop on attach and detach. On retry, the tracee will enter the desired state in the correct way. The lower 16bits of task->group_stop is used to remember the signal number which caused the last group stop. This is used while retrying for ptrace attach as the original group_exit_code could have been consumed with wait(2) by then. As the real parent may wait(2) and consume the group_exit_code anytime, the group_exit_code needs to be saved separately so that it can be used when switching from regular sleep to ptrace_stop(). This is recorded in the lower 16bits of task->group_stop. If a task is already stopped and there's no intervening SIGCONT, a ptrace request immediately following a successful PTRACE_ATTACH should always succeed even if the tracer doesn't wait(2) for attach completion; however, with this change, the tracee might still be TASK_RUNNING trying to enter TASK_TRACED which would cause the following request to fail with -ESRCH. This intermediate state is hidden from the ptracer by setting GROUP_STOP_TRAPPING on attach and making ptrace_check_attach() wait for it to clear on its signal->wait_chldexit. Completing the transition or getting killed clears TRAPPING and wakes up the tracer. Note that the STOPPED -> RUNNING -> TRACED transition is still visible to other threads which are in the same group as the ptracer and the reverse transition is visible to all. Please read the comments for details. Oleg: * Spotted a race condition where a task may retry group stop without proper bookkeeping. Fixed by redoing bookkeeping on retry. * Spotted that the transition is visible to userland in several different ways. Most are fixed with GROUP_STOP_TRAPPING. Unhandled corner case is documented. * Pointed out not setting GROUP_STOP_SIGMASK on an already stopped task would result in more consistent behavior. * Pointed out that calling ptrace_stop() from do_signal_stop() in TASK_STOPPED can race with group stop start logic and then confuse the TRAPPING wait in ptrace_check_attach(). ptrace_stop() is now called with TASK_RUNNING. * Suggested using signal->wait_chldexit instead of bit wait. * Spotted a race condition between TRACED transition and clearing of TRAPPING. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
2011-03-23 09:37:00 +00:00
/**
job control: rename signal->group_stop and flags to jobctl and update them signal->group_stop currently hosts mostly group stop related flags; however, it's gonna be used for wider purposes and the GROUP_STOP_ flag prefix becomes confusing. Rename signal->group_stop to signal->jobctl and rename all GROUP_STOP_* flags to JOBCTL_*. Bit position macros JOBCTL_*_BIT are defined and JOBCTL_* flags are defined in terms of them to allow using bitops later. While at it, reassign JOBCTL_TRAPPING to bit 22 to better accomodate future additions. This doesn't cause any functional change. -v2: JOBCTL_*_BIT macros added as suggested by Linus. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-02 09:13:59 +00:00
* task_clear_jobctl_trapping - clear jobctl trapping bit
ptrace: Clean transitions between TASK_STOPPED and TRACED Currently, if the task is STOPPED on ptrace attach, it's left alone and the state is silently changed to TRACED on the next ptrace call. The behavior breaks the assumption that arch_ptrace_stop() is called before any task is poked by ptrace and is ugly in that a task manipulates the state of another task directly. With GROUP_STOP_PENDING, the transitions between TASK_STOPPED and TRACED can be made clean. The tracer can use the flag to tell the tracee to retry stop on attach and detach. On retry, the tracee will enter the desired state in the correct way. The lower 16bits of task->group_stop is used to remember the signal number which caused the last group stop. This is used while retrying for ptrace attach as the original group_exit_code could have been consumed with wait(2) by then. As the real parent may wait(2) and consume the group_exit_code anytime, the group_exit_code needs to be saved separately so that it can be used when switching from regular sleep to ptrace_stop(). This is recorded in the lower 16bits of task->group_stop. If a task is already stopped and there's no intervening SIGCONT, a ptrace request immediately following a successful PTRACE_ATTACH should always succeed even if the tracer doesn't wait(2) for attach completion; however, with this change, the tracee might still be TASK_RUNNING trying to enter TASK_TRACED which would cause the following request to fail with -ESRCH. This intermediate state is hidden from the ptracer by setting GROUP_STOP_TRAPPING on attach and making ptrace_check_attach() wait for it to clear on its signal->wait_chldexit. Completing the transition or getting killed clears TRAPPING and wakes up the tracer. Note that the STOPPED -> RUNNING -> TRACED transition is still visible to other threads which are in the same group as the ptracer and the reverse transition is visible to all. Please read the comments for details. Oleg: * Spotted a race condition where a task may retry group stop without proper bookkeeping. Fixed by redoing bookkeeping on retry. * Spotted that the transition is visible to userland in several different ways. Most are fixed with GROUP_STOP_TRAPPING. Unhandled corner case is documented. * Pointed out not setting GROUP_STOP_SIGMASK on an already stopped task would result in more consistent behavior. * Pointed out that calling ptrace_stop() from do_signal_stop() in TASK_STOPPED can race with group stop start logic and then confuse the TRAPPING wait in ptrace_check_attach(). ptrace_stop() is now called with TASK_RUNNING. * Suggested using signal->wait_chldexit instead of bit wait. * Spotted a race condition between TRACED transition and clearing of TRAPPING. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
2011-03-23 09:37:00 +00:00
* @task: target task
*
job control: rename signal->group_stop and flags to jobctl and update them signal->group_stop currently hosts mostly group stop related flags; however, it's gonna be used for wider purposes and the GROUP_STOP_ flag prefix becomes confusing. Rename signal->group_stop to signal->jobctl and rename all GROUP_STOP_* flags to JOBCTL_*. Bit position macros JOBCTL_*_BIT are defined and JOBCTL_* flags are defined in terms of them to allow using bitops later. While at it, reassign JOBCTL_TRAPPING to bit 22 to better accomodate future additions. This doesn't cause any functional change. -v2: JOBCTL_*_BIT macros added as suggested by Linus. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-02 09:13:59 +00:00
* If JOBCTL_TRAPPING is set, a ptracer is waiting for us to enter TRACED.
* Clear it and wake up the ptracer. Note that we don't need any further
* locking. @task->siglock guarantees that @task->parent points to the
* ptracer.
ptrace: Clean transitions between TASK_STOPPED and TRACED Currently, if the task is STOPPED on ptrace attach, it's left alone and the state is silently changed to TRACED on the next ptrace call. The behavior breaks the assumption that arch_ptrace_stop() is called before any task is poked by ptrace and is ugly in that a task manipulates the state of another task directly. With GROUP_STOP_PENDING, the transitions between TASK_STOPPED and TRACED can be made clean. The tracer can use the flag to tell the tracee to retry stop on attach and detach. On retry, the tracee will enter the desired state in the correct way. The lower 16bits of task->group_stop is used to remember the signal number which caused the last group stop. This is used while retrying for ptrace attach as the original group_exit_code could have been consumed with wait(2) by then. As the real parent may wait(2) and consume the group_exit_code anytime, the group_exit_code needs to be saved separately so that it can be used when switching from regular sleep to ptrace_stop(). This is recorded in the lower 16bits of task->group_stop. If a task is already stopped and there's no intervening SIGCONT, a ptrace request immediately following a successful PTRACE_ATTACH should always succeed even if the tracer doesn't wait(2) for attach completion; however, with this change, the tracee might still be TASK_RUNNING trying to enter TASK_TRACED which would cause the following request to fail with -ESRCH. This intermediate state is hidden from the ptracer by setting GROUP_STOP_TRAPPING on attach and making ptrace_check_attach() wait for it to clear on its signal->wait_chldexit. Completing the transition or getting killed clears TRAPPING and wakes up the tracer. Note that the STOPPED -> RUNNING -> TRACED transition is still visible to other threads which are in the same group as the ptracer and the reverse transition is visible to all. Please read the comments for details. Oleg: * Spotted a race condition where a task may retry group stop without proper bookkeeping. Fixed by redoing bookkeeping on retry. * Spotted that the transition is visible to userland in several different ways. Most are fixed with GROUP_STOP_TRAPPING. Unhandled corner case is documented. * Pointed out not setting GROUP_STOP_SIGMASK on an already stopped task would result in more consistent behavior. * Pointed out that calling ptrace_stop() from do_signal_stop() in TASK_STOPPED can race with group stop start logic and then confuse the TRAPPING wait in ptrace_check_attach(). ptrace_stop() is now called with TASK_RUNNING. * Suggested using signal->wait_chldexit instead of bit wait. * Spotted a race condition between TRACED transition and clearing of TRAPPING. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
2011-03-23 09:37:00 +00:00
*
* CONTEXT:
* Must be called with @task->sighand->siglock held.
*/
job control: introduce JOBCTL_TRAP_STOP and use it for group stop trap do_signal_stop() implemented both normal group stop and trap for group stop while ptraced. This approach has been enough but scheduled changes require trap mechanism which can be used in more generic manner and using group stop trap for generic trap site simplifies both userland visible interface and implementation. This patch adds a new jobctl flag - JOBCTL_TRAP_STOP. When set, it triggers a trap site, which behaves like group stop trap, in get_signal_to_deliver() after checking for pending signals. While ptraced, do_signal_stop() doesn't stop itself. It initiates group stop if requested and schedules JOBCTL_TRAP_STOP and returns. The caller - get_signal_to_deliver() - is responsible for checking whether TRAP_STOP is pending afterwards and handling it. ptrace_attach() is updated to use JOBCTL_TRAP_STOP instead of JOBCTL_STOP_PENDING and __ptrace_unlink() to clear all pending trap bits and TRAPPING so that TRAP_STOP and future trap bits don't linger after detach. While at it, add proper function comment to do_signal_stop() and make it return bool. -v2: __ptrace_unlink() updated to clear JOBCTL_TRAP_MASK and TRAPPING instead of JOBCTL_PENDING_MASK. This avoids accidentally clearing JOBCTL_STOP_CONSUME. Spotted by Oleg. -v3: do_signal_stop() updated to return %false without dropping siglock while ptraced and TRAP_STOP check moved inside for(;;) loop after group stop participation. This avoids unnecessary relocking and also will help avoiding unnecessary traps by consuming group stop before handling pending traps. -v4: Jobctl trap handling moved into a separate function - do_jobctl_trap(). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 09:20:14 +00:00
void task_clear_jobctl_trapping(struct task_struct *task)
ptrace: Clean transitions between TASK_STOPPED and TRACED Currently, if the task is STOPPED on ptrace attach, it's left alone and the state is silently changed to TRACED on the next ptrace call. The behavior breaks the assumption that arch_ptrace_stop() is called before any task is poked by ptrace and is ugly in that a task manipulates the state of another task directly. With GROUP_STOP_PENDING, the transitions between TASK_STOPPED and TRACED can be made clean. The tracer can use the flag to tell the tracee to retry stop on attach and detach. On retry, the tracee will enter the desired state in the correct way. The lower 16bits of task->group_stop is used to remember the signal number which caused the last group stop. This is used while retrying for ptrace attach as the original group_exit_code could have been consumed with wait(2) by then. As the real parent may wait(2) and consume the group_exit_code anytime, the group_exit_code needs to be saved separately so that it can be used when switching from regular sleep to ptrace_stop(). This is recorded in the lower 16bits of task->group_stop. If a task is already stopped and there's no intervening SIGCONT, a ptrace request immediately following a successful PTRACE_ATTACH should always succeed even if the tracer doesn't wait(2) for attach completion; however, with this change, the tracee might still be TASK_RUNNING trying to enter TASK_TRACED which would cause the following request to fail with -ESRCH. This intermediate state is hidden from the ptracer by setting GROUP_STOP_TRAPPING on attach and making ptrace_check_attach() wait for it to clear on its signal->wait_chldexit. Completing the transition or getting killed clears TRAPPING and wakes up the tracer. Note that the STOPPED -> RUNNING -> TRACED transition is still visible to other threads which are in the same group as the ptracer and the reverse transition is visible to all. Please read the comments for details. Oleg: * Spotted a race condition where a task may retry group stop without proper bookkeeping. Fixed by redoing bookkeeping on retry. * Spotted that the transition is visible to userland in several different ways. Most are fixed with GROUP_STOP_TRAPPING. Unhandled corner case is documented. * Pointed out not setting GROUP_STOP_SIGMASK on an already stopped task would result in more consistent behavior. * Pointed out that calling ptrace_stop() from do_signal_stop() in TASK_STOPPED can race with group stop start logic and then confuse the TRAPPING wait in ptrace_check_attach(). ptrace_stop() is now called with TASK_RUNNING. * Suggested using signal->wait_chldexit instead of bit wait. * Spotted a race condition between TRACED transition and clearing of TRAPPING. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
2011-03-23 09:37:00 +00:00
{
job control: rename signal->group_stop and flags to jobctl and update them signal->group_stop currently hosts mostly group stop related flags; however, it's gonna be used for wider purposes and the GROUP_STOP_ flag prefix becomes confusing. Rename signal->group_stop to signal->jobctl and rename all GROUP_STOP_* flags to JOBCTL_*. Bit position macros JOBCTL_*_BIT are defined and JOBCTL_* flags are defined in terms of them to allow using bitops later. While at it, reassign JOBCTL_TRAPPING to bit 22 to better accomodate future additions. This doesn't cause any functional change. -v2: JOBCTL_*_BIT macros added as suggested by Linus. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-02 09:13:59 +00:00
if (unlikely(task->jobctl & JOBCTL_TRAPPING)) {
task->jobctl &= ~JOBCTL_TRAPPING;
ptrace: task_clear_jobctl_trapping()->wake_up_bit() needs mb() __wake_up_bit() checks waitqueue_active() and thus the caller needs mb() as wake_up_bit() documents, fix task_clear_jobctl_trapping(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 21:36:44 +00:00
smp_mb(); /* advised by wake_up_bit() */
ptrace: use bit_waitqueue for TRAPPING instead of wait_chldexit ptracer->signal->wait_chldexit was used to wait for TRAPPING; however, ->wait_chldexit was already complicated with waker-side filtering without adding TRAPPING wait on top of it. Also, it unnecessarily made TRAPPING clearing depend on the current ptrace relationship - if the ptracee is detached, wakeup is lost. There is no reason to use signal->wait_chldexit here. We're just waiting for JOBCTL_TRAPPING bit to clear and given the relatively infrequent use of ptrace, bit_waitqueue can serve it perfectly. This patch makes JOBCTL_TRAPPING wait use bit_waitqueue instead of signal->wait_chldexit. -v2: Use JOBCTL_*_BIT macros instead of ilog2() as suggested by Linus. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-02 09:14:00 +00:00
wake_up_bit(&task->jobctl, JOBCTL_TRAPPING_BIT);
ptrace: Clean transitions between TASK_STOPPED and TRACED Currently, if the task is STOPPED on ptrace attach, it's left alone and the state is silently changed to TRACED on the next ptrace call. The behavior breaks the assumption that arch_ptrace_stop() is called before any task is poked by ptrace and is ugly in that a task manipulates the state of another task directly. With GROUP_STOP_PENDING, the transitions between TASK_STOPPED and TRACED can be made clean. The tracer can use the flag to tell the tracee to retry stop on attach and detach. On retry, the tracee will enter the desired state in the correct way. The lower 16bits of task->group_stop is used to remember the signal number which caused the last group stop. This is used while retrying for ptrace attach as the original group_exit_code could have been consumed with wait(2) by then. As the real parent may wait(2) and consume the group_exit_code anytime, the group_exit_code needs to be saved separately so that it can be used when switching from regular sleep to ptrace_stop(). This is recorded in the lower 16bits of task->group_stop. If a task is already stopped and there's no intervening SIGCONT, a ptrace request immediately following a successful PTRACE_ATTACH should always succeed even if the tracer doesn't wait(2) for attach completion; however, with this change, the tracee might still be TASK_RUNNING trying to enter TASK_TRACED which would cause the following request to fail with -ESRCH. This intermediate state is hidden from the ptracer by setting GROUP_STOP_TRAPPING on attach and making ptrace_check_attach() wait for it to clear on its signal->wait_chldexit. Completing the transition or getting killed clears TRAPPING and wakes up the tracer. Note that the STOPPED -> RUNNING -> TRACED transition is still visible to other threads which are in the same group as the ptracer and the reverse transition is visible to all. Please read the comments for details. Oleg: * Spotted a race condition where a task may retry group stop without proper bookkeeping. Fixed by redoing bookkeeping on retry. * Spotted that the transition is visible to userland in several different ways. Most are fixed with GROUP_STOP_TRAPPING. Unhandled corner case is documented. * Pointed out not setting GROUP_STOP_SIGMASK on an already stopped task would result in more consistent behavior. * Pointed out that calling ptrace_stop() from do_signal_stop() in TASK_STOPPED can race with group stop start logic and then confuse the TRAPPING wait in ptrace_check_attach(). ptrace_stop() is now called with TASK_RUNNING. * Suggested using signal->wait_chldexit instead of bit wait. * Spotted a race condition between TRACED transition and clearing of TRAPPING. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
2011-03-23 09:37:00 +00:00
}
}
signal: Fix premature completion of group stop when interfered by ptrace task->signal->group_stop_count is used to track the progress of group stop. It's initialized to the number of tasks which need to stop for group stop to finish and each stopping or trapping task decrements. However, each task doesn't keep track of whether it decremented the counter or not and if woken up before the group stop is complete and stops again, it can decrement the counter multiple times. Please consider the following example code. static void *worker(void *arg) { while (1) ; return NULL; } int main(void) { pthread_t thread; pid_t pid; int i; pid = fork(); if (!pid) { for (i = 0; i < 5; i++) pthread_create(&thread, NULL, worker, NULL); while (1) ; return 0; } ptrace(PTRACE_ATTACH, pid, NULL, NULL); while (1) { waitid(P_PID, pid, NULL, WSTOPPED); ptrace(PTRACE_SINGLESTEP, pid, NULL, (void *)(long)SIGSTOP); } return 0; } The child creates five threads and the parent continuously traps the first thread and whenever the child gets a signal, SIGSTOP is delivered. If an external process sends SIGSTOP to the child, all other threads in the process should reliably stop. However, due to the above bug, the first thread will often end up consuming group_stop_count multiple times and SIGSTOP often ends up stopping none or part of the other four threads. This patch adds a new field task->group_stop which is protected by siglock and uses GROUP_STOP_CONSUME flag to track which task is still to consume group_stop_count to fix this bug. task_clear_group_stop_pending() and task_participate_group_stop() are added to help manipulating group stop states. As ptrace_stop() now also uses task_participate_group_stop(), it will set SIGNAL_STOP_STOPPED if it completes a group stop. There still are many issues regarding the interaction between group stop and ptrace. Patches to address them will follow. - Oleg spotted duplicate GROUP_STOP_CONSUME. Dropped. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com>
2011-03-23 09:37:00 +00:00
/**
job control: introduce JOBCTL_PENDING_MASK and task_clear_jobctl_pending() This patch introduces JOBCTL_PENDING_MASK and replaces task_clear_jobctl_stop_pending() with task_clear_jobctl_pending() which takes an extra @mask argument. JOBCTL_PENDING_MASK is currently equal to JOBCTL_STOP_PENDING but future patches will add more bits. recalc_sigpending_tsk() is updated to use JOBCTL_PENDING_MASK instead. task_clear_jobctl_pending() takes @mask which in subset of JOBCTL_PENDING_MASK and clears the relevant jobctl bits. If JOBCTL_STOP_PENDING is set, other STOP bits are cleared together. All task_clear_jobctl_stop_pending() users are updated to call task_clear_jobctl_pending() with JOBCTL_STOP_PENDING which is functionally identical to task_clear_jobctl_stop_pending(). This patch doesn't cause any functional change. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-02 09:14:00 +00:00
* task_clear_jobctl_pending - clear jobctl pending bits
signal: Fix premature completion of group stop when interfered by ptrace task->signal->group_stop_count is used to track the progress of group stop. It's initialized to the number of tasks which need to stop for group stop to finish and each stopping or trapping task decrements. However, each task doesn't keep track of whether it decremented the counter or not and if woken up before the group stop is complete and stops again, it can decrement the counter multiple times. Please consider the following example code. static void *worker(void *arg) { while (1) ; return NULL; } int main(void) { pthread_t thread; pid_t pid; int i; pid = fork(); if (!pid) { for (i = 0; i < 5; i++) pthread_create(&thread, NULL, worker, NULL); while (1) ; return 0; } ptrace(PTRACE_ATTACH, pid, NULL, NULL); while (1) { waitid(P_PID, pid, NULL, WSTOPPED); ptrace(PTRACE_SINGLESTEP, pid, NULL, (void *)(long)SIGSTOP); } return 0; } The child creates five threads and the parent continuously traps the first thread and whenever the child gets a signal, SIGSTOP is delivered. If an external process sends SIGSTOP to the child, all other threads in the process should reliably stop. However, due to the above bug, the first thread will often end up consuming group_stop_count multiple times and SIGSTOP often ends up stopping none or part of the other four threads. This patch adds a new field task->group_stop which is protected by siglock and uses GROUP_STOP_CONSUME flag to track which task is still to consume group_stop_count to fix this bug. task_clear_group_stop_pending() and task_participate_group_stop() are added to help manipulating group stop states. As ptrace_stop() now also uses task_participate_group_stop(), it will set SIGNAL_STOP_STOPPED if it completes a group stop. There still are many issues regarding the interaction between group stop and ptrace. Patches to address them will follow. - Oleg spotted duplicate GROUP_STOP_CONSUME. Dropped. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com>
2011-03-23 09:37:00 +00:00
* @task: target task
job control: introduce JOBCTL_PENDING_MASK and task_clear_jobctl_pending() This patch introduces JOBCTL_PENDING_MASK and replaces task_clear_jobctl_stop_pending() with task_clear_jobctl_pending() which takes an extra @mask argument. JOBCTL_PENDING_MASK is currently equal to JOBCTL_STOP_PENDING but future patches will add more bits. recalc_sigpending_tsk() is updated to use JOBCTL_PENDING_MASK instead. task_clear_jobctl_pending() takes @mask which in subset of JOBCTL_PENDING_MASK and clears the relevant jobctl bits. If JOBCTL_STOP_PENDING is set, other STOP bits are cleared together. All task_clear_jobctl_stop_pending() users are updated to call task_clear_jobctl_pending() with JOBCTL_STOP_PENDING which is functionally identical to task_clear_jobctl_stop_pending(). This patch doesn't cause any functional change. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-02 09:14:00 +00:00
* @mask: pending bits to clear
signal: Fix premature completion of group stop when interfered by ptrace task->signal->group_stop_count is used to track the progress of group stop. It's initialized to the number of tasks which need to stop for group stop to finish and each stopping or trapping task decrements. However, each task doesn't keep track of whether it decremented the counter or not and if woken up before the group stop is complete and stops again, it can decrement the counter multiple times. Please consider the following example code. static void *worker(void *arg) { while (1) ; return NULL; } int main(void) { pthread_t thread; pid_t pid; int i; pid = fork(); if (!pid) { for (i = 0; i < 5; i++) pthread_create(&thread, NULL, worker, NULL); while (1) ; return 0; } ptrace(PTRACE_ATTACH, pid, NULL, NULL); while (1) { waitid(P_PID, pid, NULL, WSTOPPED); ptrace(PTRACE_SINGLESTEP, pid, NULL, (void *)(long)SIGSTOP); } return 0; } The child creates five threads and the parent continuously traps the first thread and whenever the child gets a signal, SIGSTOP is delivered. If an external process sends SIGSTOP to the child, all other threads in the process should reliably stop. However, due to the above bug, the first thread will often end up consuming group_stop_count multiple times and SIGSTOP often ends up stopping none or part of the other four threads. This patch adds a new field task->group_stop which is protected by siglock and uses GROUP_STOP_CONSUME flag to track which task is still to consume group_stop_count to fix this bug. task_clear_group_stop_pending() and task_participate_group_stop() are added to help manipulating group stop states. As ptrace_stop() now also uses task_participate_group_stop(), it will set SIGNAL_STOP_STOPPED if it completes a group stop. There still are many issues regarding the interaction between group stop and ptrace. Patches to address them will follow. - Oleg spotted duplicate GROUP_STOP_CONSUME. Dropped. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com>
2011-03-23 09:37:00 +00:00
*
job control: introduce JOBCTL_PENDING_MASK and task_clear_jobctl_pending() This patch introduces JOBCTL_PENDING_MASK and replaces task_clear_jobctl_stop_pending() with task_clear_jobctl_pending() which takes an extra @mask argument. JOBCTL_PENDING_MASK is currently equal to JOBCTL_STOP_PENDING but future patches will add more bits. recalc_sigpending_tsk() is updated to use JOBCTL_PENDING_MASK instead. task_clear_jobctl_pending() takes @mask which in subset of JOBCTL_PENDING_MASK and clears the relevant jobctl bits. If JOBCTL_STOP_PENDING is set, other STOP bits are cleared together. All task_clear_jobctl_stop_pending() users are updated to call task_clear_jobctl_pending() with JOBCTL_STOP_PENDING which is functionally identical to task_clear_jobctl_stop_pending(). This patch doesn't cause any functional change. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-02 09:14:00 +00:00
* Clear @mask from @task->jobctl. @mask must be subset of
* %JOBCTL_PENDING_MASK. If %JOBCTL_STOP_PENDING is being cleared, other
* STOP bits are cleared together.
signal: Fix premature completion of group stop when interfered by ptrace task->signal->group_stop_count is used to track the progress of group stop. It's initialized to the number of tasks which need to stop for group stop to finish and each stopping or trapping task decrements. However, each task doesn't keep track of whether it decremented the counter or not and if woken up before the group stop is complete and stops again, it can decrement the counter multiple times. Please consider the following example code. static void *worker(void *arg) { while (1) ; return NULL; } int main(void) { pthread_t thread; pid_t pid; int i; pid = fork(); if (!pid) { for (i = 0; i < 5; i++) pthread_create(&thread, NULL, worker, NULL); while (1) ; return 0; } ptrace(PTRACE_ATTACH, pid, NULL, NULL); while (1) { waitid(P_PID, pid, NULL, WSTOPPED); ptrace(PTRACE_SINGLESTEP, pid, NULL, (void *)(long)SIGSTOP); } return 0; } The child creates five threads and the parent continuously traps the first thread and whenever the child gets a signal, SIGSTOP is delivered. If an external process sends SIGSTOP to the child, all other threads in the process should reliably stop. However, due to the above bug, the first thread will often end up consuming group_stop_count multiple times and SIGSTOP often ends up stopping none or part of the other four threads. This patch adds a new field task->group_stop which is protected by siglock and uses GROUP_STOP_CONSUME flag to track which task is still to consume group_stop_count to fix this bug. task_clear_group_stop_pending() and task_participate_group_stop() are added to help manipulating group stop states. As ptrace_stop() now also uses task_participate_group_stop(), it will set SIGNAL_STOP_STOPPED if it completes a group stop. There still are many issues regarding the interaction between group stop and ptrace. Patches to address them will follow. - Oleg spotted duplicate GROUP_STOP_CONSUME. Dropped. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com>
2011-03-23 09:37:00 +00:00
*
job control: make task_clear_jobctl_pending() clear TRAPPING automatically JOBCTL_TRAPPING indicates that ptracer is waiting for tracee to (re)transit into TRACED. task_clear_jobctl_pending() must be called when either tracee enters TRACED or the transition is cancelled for some reason. The former is achieved by explicitly calling task_clear_jobctl_pending() in ptrace_stop() and the latter by calling it at the end of do_signal_stop(). Calling task_clear_jobctl_trapping() at the end of do_signal_stop() limits the scope TRAPPING can be used and is fragile in that seemingly unrelated changes to tracee's control flow can lead to stuck TRAPPING. We already have task_clear_jobctl_pending() calls on those cancelling events to clear JOBCTL_STOP_PENDING. Cancellations can be handled by making those call sites use JOBCTL_PENDING_MASK instead and updating task_clear_jobctl_pending() such that task_clear_jobctl_trapping() is called automatically if no stop/trap is pending. This patch makes the above changes and removes the fallback task_clear_jobctl_trapping() call from do_signal_stop(). Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-02 09:14:00 +00:00
* If clearing of @mask leaves no stop or trap pending, this function calls
* task_clear_jobctl_trapping().
signal: Fix premature completion of group stop when interfered by ptrace task->signal->group_stop_count is used to track the progress of group stop. It's initialized to the number of tasks which need to stop for group stop to finish and each stopping or trapping task decrements. However, each task doesn't keep track of whether it decremented the counter or not and if woken up before the group stop is complete and stops again, it can decrement the counter multiple times. Please consider the following example code. static void *worker(void *arg) { while (1) ; return NULL; } int main(void) { pthread_t thread; pid_t pid; int i; pid = fork(); if (!pid) { for (i = 0; i < 5; i++) pthread_create(&thread, NULL, worker, NULL); while (1) ; return 0; } ptrace(PTRACE_ATTACH, pid, NULL, NULL); while (1) { waitid(P_PID, pid, NULL, WSTOPPED); ptrace(PTRACE_SINGLESTEP, pid, NULL, (void *)(long)SIGSTOP); } return 0; } The child creates five threads and the parent continuously traps the first thread and whenever the child gets a signal, SIGSTOP is delivered. If an external process sends SIGSTOP to the child, all other threads in the process should reliably stop. However, due to the above bug, the first thread will often end up consuming group_stop_count multiple times and SIGSTOP often ends up stopping none or part of the other four threads. This patch adds a new field task->group_stop which is protected by siglock and uses GROUP_STOP_CONSUME flag to track which task is still to consume group_stop_count to fix this bug. task_clear_group_stop_pending() and task_participate_group_stop() are added to help manipulating group stop states. As ptrace_stop() now also uses task_participate_group_stop(), it will set SIGNAL_STOP_STOPPED if it completes a group stop. There still are many issues regarding the interaction between group stop and ptrace. Patches to address them will follow. - Oleg spotted duplicate GROUP_STOP_CONSUME. Dropped. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com>
2011-03-23 09:37:00 +00:00
*
* CONTEXT:
* Must be called with @task->sighand->siglock held.
*/
signals, sched: Change all uses of JOBCTL_* from 'int' to 'long' c56fb6564dcd ("Fix a misaligned load inside ptrace_attach()") makes jobctl an "unsigned long". It makes sense to have the masks applied to it match that type. This is currently just a cosmetic change, but it will prevent the mask from being unexpectedly truncated if we ever end up with masks with more bits. One instance of "signr" is an int, but I left this alone because the mask ensures that it will never overflow. Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Chris Metcalf <cmetcalf@ezchip.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bobby.prani@gmail.com Cc: oleg@redhat.com Cc: paulmck@linux.vnet.ibm.com Cc: richard@nod.at Cc: vdavydov@parallels.com Link: http://lkml.kernel.org/r/1430453997-32459-4-git-send-email-palmer@dabbelt.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-01 04:19:57 +00:00
void task_clear_jobctl_pending(struct task_struct *task, unsigned long mask)
signal: Fix premature completion of group stop when interfered by ptrace task->signal->group_stop_count is used to track the progress of group stop. It's initialized to the number of tasks which need to stop for group stop to finish and each stopping or trapping task decrements. However, each task doesn't keep track of whether it decremented the counter or not and if woken up before the group stop is complete and stops again, it can decrement the counter multiple times. Please consider the following example code. static void *worker(void *arg) { while (1) ; return NULL; } int main(void) { pthread_t thread; pid_t pid; int i; pid = fork(); if (!pid) { for (i = 0; i < 5; i++) pthread_create(&thread, NULL, worker, NULL); while (1) ; return 0; } ptrace(PTRACE_ATTACH, pid, NULL, NULL); while (1) { waitid(P_PID, pid, NULL, WSTOPPED); ptrace(PTRACE_SINGLESTEP, pid, NULL, (void *)(long)SIGSTOP); } return 0; } The child creates five threads and the parent continuously traps the first thread and whenever the child gets a signal, SIGSTOP is delivered. If an external process sends SIGSTOP to the child, all other threads in the process should reliably stop. However, due to the above bug, the first thread will often end up consuming group_stop_count multiple times and SIGSTOP often ends up stopping none or part of the other four threads. This patch adds a new field task->group_stop which is protected by siglock and uses GROUP_STOP_CONSUME flag to track which task is still to consume group_stop_count to fix this bug. task_clear_group_stop_pending() and task_participate_group_stop() are added to help manipulating group stop states. As ptrace_stop() now also uses task_participate_group_stop(), it will set SIGNAL_STOP_STOPPED if it completes a group stop. There still are many issues regarding the interaction between group stop and ptrace. Patches to address them will follow. - Oleg spotted duplicate GROUP_STOP_CONSUME. Dropped. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com>
2011-03-23 09:37:00 +00:00
{
job control: introduce JOBCTL_PENDING_MASK and task_clear_jobctl_pending() This patch introduces JOBCTL_PENDING_MASK and replaces task_clear_jobctl_stop_pending() with task_clear_jobctl_pending() which takes an extra @mask argument. JOBCTL_PENDING_MASK is currently equal to JOBCTL_STOP_PENDING but future patches will add more bits. recalc_sigpending_tsk() is updated to use JOBCTL_PENDING_MASK instead. task_clear_jobctl_pending() takes @mask which in subset of JOBCTL_PENDING_MASK and clears the relevant jobctl bits. If JOBCTL_STOP_PENDING is set, other STOP bits are cleared together. All task_clear_jobctl_stop_pending() users are updated to call task_clear_jobctl_pending() with JOBCTL_STOP_PENDING which is functionally identical to task_clear_jobctl_stop_pending(). This patch doesn't cause any functional change. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-02 09:14:00 +00:00
BUG_ON(mask & ~JOBCTL_PENDING_MASK);
if (mask & JOBCTL_STOP_PENDING)
mask |= JOBCTL_STOP_CONSUME | JOBCTL_STOP_DEQUEUED;
task->jobctl &= ~mask;
job control: make task_clear_jobctl_pending() clear TRAPPING automatically JOBCTL_TRAPPING indicates that ptracer is waiting for tracee to (re)transit into TRACED. task_clear_jobctl_pending() must be called when either tracee enters TRACED or the transition is cancelled for some reason. The former is achieved by explicitly calling task_clear_jobctl_pending() in ptrace_stop() and the latter by calling it at the end of do_signal_stop(). Calling task_clear_jobctl_trapping() at the end of do_signal_stop() limits the scope TRAPPING can be used and is fragile in that seemingly unrelated changes to tracee's control flow can lead to stuck TRAPPING. We already have task_clear_jobctl_pending() calls on those cancelling events to clear JOBCTL_STOP_PENDING. Cancellations can be handled by making those call sites use JOBCTL_PENDING_MASK instead and updating task_clear_jobctl_pending() such that task_clear_jobctl_trapping() is called automatically if no stop/trap is pending. This patch makes the above changes and removes the fallback task_clear_jobctl_trapping() call from do_signal_stop(). Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-02 09:14:00 +00:00
if (!(task->jobctl & JOBCTL_PENDING_MASK))
task_clear_jobctl_trapping(task);
signal: Fix premature completion of group stop when interfered by ptrace task->signal->group_stop_count is used to track the progress of group stop. It's initialized to the number of tasks which need to stop for group stop to finish and each stopping or trapping task decrements. However, each task doesn't keep track of whether it decremented the counter or not and if woken up before the group stop is complete and stops again, it can decrement the counter multiple times. Please consider the following example code. static void *worker(void *arg) { while (1) ; return NULL; } int main(void) { pthread_t thread; pid_t pid; int i; pid = fork(); if (!pid) { for (i = 0; i < 5; i++) pthread_create(&thread, NULL, worker, NULL); while (1) ; return 0; } ptrace(PTRACE_ATTACH, pid, NULL, NULL); while (1) { waitid(P_PID, pid, NULL, WSTOPPED); ptrace(PTRACE_SINGLESTEP, pid, NULL, (void *)(long)SIGSTOP); } return 0; } The child creates five threads and the parent continuously traps the first thread and whenever the child gets a signal, SIGSTOP is delivered. If an external process sends SIGSTOP to the child, all other threads in the process should reliably stop. However, due to the above bug, the first thread will often end up consuming group_stop_count multiple times and SIGSTOP often ends up stopping none or part of the other four threads. This patch adds a new field task->group_stop which is protected by siglock and uses GROUP_STOP_CONSUME flag to track which task is still to consume group_stop_count to fix this bug. task_clear_group_stop_pending() and task_participate_group_stop() are added to help manipulating group stop states. As ptrace_stop() now also uses task_participate_group_stop(), it will set SIGNAL_STOP_STOPPED if it completes a group stop. There still are many issues regarding the interaction between group stop and ptrace. Patches to address them will follow. - Oleg spotted duplicate GROUP_STOP_CONSUME. Dropped. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com>
2011-03-23 09:37:00 +00:00
}
/**
* task_participate_group_stop - participate in a group stop
* @task: task participating in a group stop
*
job control: rename signal->group_stop and flags to jobctl and update them signal->group_stop currently hosts mostly group stop related flags; however, it's gonna be used for wider purposes and the GROUP_STOP_ flag prefix becomes confusing. Rename signal->group_stop to signal->jobctl and rename all GROUP_STOP_* flags to JOBCTL_*. Bit position macros JOBCTL_*_BIT are defined and JOBCTL_* flags are defined in terms of them to allow using bitops later. While at it, reassign JOBCTL_TRAPPING to bit 22 to better accomodate future additions. This doesn't cause any functional change. -v2: JOBCTL_*_BIT macros added as suggested by Linus. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-02 09:13:59 +00:00
* @task has %JOBCTL_STOP_PENDING set and is participating in a group stop.
signal: Use GROUP_STOP_PENDING to stop once for a single group stop Currently task->signal->group_stop_count is used to decide whether to stop for group stop. However, if there is a task in the group which is taking a long time to stop, other tasks which are continued by ptrace would repeatedly stop for the same group stop until the group stop is complete. Conversely, if a ptraced task is in TASK_TRACED state, the debugger won't get notified of group stops which is inconsistent compared to the ptraced task in any other state. This patch introduces GROUP_STOP_PENDING which tracks whether a task is yet to stop for the group stop in progress. The flag is set when a group stop starts and cleared when the task stops the first time for the group stop, and consulted whenever whether the task should participate in a group stop needs to be determined. Note that now tasks in TASK_TRACED also participate in group stop. This results in the following behavior changes. * For a single group stop, a ptracer would see at most one stop reported. * A ptracee in TASK_TRACED now also participates in group stop and the tracer would get the notification. However, as a ptraced task could be in TASK_STOPPED state or any ptrace trap could consume group stop, the notification may still be missing. These will be addressed with further patches. * A ptracee may start a group stop while one is still in progress if the tracer let it continue with stop signal delivery. Group stop code handles this correctly. Oleg: * Spotted that a task might skip signal check even when its GROUP_STOP_PENDING is set. Fixed by updating recalc_sigpending_tsk() to check GROUP_STOP_PENDING instead of group_stop_count. * Pointed out that task->group_stop should be cleared whenever task->signal->group_stop_count is cleared. Fixed accordingly. * Pointed out the behavior inconsistency between TASK_TRACED and RUNNING and the last behavior change. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com>
2011-03-23 09:37:00 +00:00
* Group stop states are cleared and the group stop count is consumed if
job control: rename signal->group_stop and flags to jobctl and update them signal->group_stop currently hosts mostly group stop related flags; however, it's gonna be used for wider purposes and the GROUP_STOP_ flag prefix becomes confusing. Rename signal->group_stop to signal->jobctl and rename all GROUP_STOP_* flags to JOBCTL_*. Bit position macros JOBCTL_*_BIT are defined and JOBCTL_* flags are defined in terms of them to allow using bitops later. While at it, reassign JOBCTL_TRAPPING to bit 22 to better accomodate future additions. This doesn't cause any functional change. -v2: JOBCTL_*_BIT macros added as suggested by Linus. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-02 09:13:59 +00:00
* %JOBCTL_STOP_CONSUME was set. If the consumption completes the group
kernel/signal.c: fix a kernel-doc markup The kernel-doc parser doesn't handle expressions with %foo*. Instead, when an asterisk should be part of a constant, it uses an alternative notation: `foo*`. Link: http://lkml.kernel.org/r/7f18c2e0b5e39e6b7eb55ddeb043b8b260b49f2d.1563361575.git.mchehab+samsung@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Cc: Deepa Dinamani <deepa.kernel@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-03 04:48:33 +00:00
* stop, the appropriate `SIGNAL_*` flags are set.
signal: Fix premature completion of group stop when interfered by ptrace task->signal->group_stop_count is used to track the progress of group stop. It's initialized to the number of tasks which need to stop for group stop to finish and each stopping or trapping task decrements. However, each task doesn't keep track of whether it decremented the counter or not and if woken up before the group stop is complete and stops again, it can decrement the counter multiple times. Please consider the following example code. static void *worker(void *arg) { while (1) ; return NULL; } int main(void) { pthread_t thread; pid_t pid; int i; pid = fork(); if (!pid) { for (i = 0; i < 5; i++) pthread_create(&thread, NULL, worker, NULL); while (1) ; return 0; } ptrace(PTRACE_ATTACH, pid, NULL, NULL); while (1) { waitid(P_PID, pid, NULL, WSTOPPED); ptrace(PTRACE_SINGLESTEP, pid, NULL, (void *)(long)SIGSTOP); } return 0; } The child creates five threads and the parent continuously traps the first thread and whenever the child gets a signal, SIGSTOP is delivered. If an external process sends SIGSTOP to the child, all other threads in the process should reliably stop. However, due to the above bug, the first thread will often end up consuming group_stop_count multiple times and SIGSTOP often ends up stopping none or part of the other four threads. This patch adds a new field task->group_stop which is protected by siglock and uses GROUP_STOP_CONSUME flag to track which task is still to consume group_stop_count to fix this bug. task_clear_group_stop_pending() and task_participate_group_stop() are added to help manipulating group stop states. As ptrace_stop() now also uses task_participate_group_stop(), it will set SIGNAL_STOP_STOPPED if it completes a group stop. There still are many issues regarding the interaction between group stop and ptrace. Patches to address them will follow. - Oleg spotted duplicate GROUP_STOP_CONSUME. Dropped. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com>
2011-03-23 09:37:00 +00:00
*
* CONTEXT:
* Must be called with @task->sighand->siglock held.
job control: Don't send duplicate job control stop notification while ptraced Just as group_exit_code shouldn't be generated when a PTRACE_CONT'd task re-enters job control stop, notifiction for the event should be suppressed too. The logic is the same as the group_exit_code generation suppression in do_signal_stop(), if SIGNAL_STOP_STOPPED is already set, the task is re-entering job control stop without intervening SIGCONT and the notifications should be suppressed. Test case follows. #include <stdio.h> #include <unistd.h> #include <signal.h> #include <time.h> #include <sys/ptrace.h> #include <sys/wait.h> static const struct timespec ts100ms = { .tv_nsec = 100000000 }; static pid_t tracee, tracer; static const char *pid_who(pid_t pid) { return pid == tracee ? "tracee" : (pid == tracer ? "tracer" : "mommy "); } static void sigchld_sigaction(int signo, siginfo_t *si, void *ucxt) { printf("%s: SIG status=%02d code=%02d (%s)\n", pid_who(getpid()), si->si_status, si->si_code, pid_who(si->si_pid)); } int main(void) { const struct sigaction chld_sa = { .sa_sigaction = sigchld_sigaction, .sa_flags = SA_SIGINFO|SA_RESTART }; siginfo_t si; sigaction(SIGCHLD, &chld_sa, NULL); tracee = fork(); if (!tracee) { tracee = getpid(); while (1) pause(); } kill(tracee, SIGSTOP); waitid(P_PID, tracee, &si, WSTOPPED); tracer = fork(); if (!tracer) { tracer = getpid(); ptrace(PTRACE_ATTACH, tracee, NULL, NULL); waitid(P_PID, tracee, &si, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, (void *)(long)si.si_status); waitid(P_PID, tracee, &si, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, (void *)(long)si.si_status); waitid(P_PID, tracee, &si, WSTOPPED); printf("tracer: detaching\n"); ptrace(PTRACE_DETACH, tracee, NULL, NULL); return 0; } while (1) pause(); return 0; } Before the patch, the parent gets the second notification for the tracee after the tracer detaches. si_status is zero because group_exit_code is not set by the group stop completion which triggered this notification. mommy : SIG status=19 code=05 (tracee) tracer: SIG status=00 code=05 (tracee) tracer: SIG status=19 code=04 (tracee) tracer: SIG status=00 code=05 (tracee) tracer: detaching mommy : SIG status=00 code=05 (tracee) mommy : SIG status=00 code=01 (tracer) ^C After the patch, the duplicate notification is gone. mommy : SIG status=19 code=05 (tracee) tracer: SIG status=00 code=05 (tracee) tracer: SIG status=19 code=04 (tracee) tracer: SIG status=00 code=05 (tracee) tracer: detaching mommy : SIG status=00 code=01 (tracer) ^C Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com>
2011-03-23 09:37:01 +00:00
*
* RETURNS:
* %true if group stop completion should be notified to the parent, %false
* otherwise.
signal: Fix premature completion of group stop when interfered by ptrace task->signal->group_stop_count is used to track the progress of group stop. It's initialized to the number of tasks which need to stop for group stop to finish and each stopping or trapping task decrements. However, each task doesn't keep track of whether it decremented the counter or not and if woken up before the group stop is complete and stops again, it can decrement the counter multiple times. Please consider the following example code. static void *worker(void *arg) { while (1) ; return NULL; } int main(void) { pthread_t thread; pid_t pid; int i; pid = fork(); if (!pid) { for (i = 0; i < 5; i++) pthread_create(&thread, NULL, worker, NULL); while (1) ; return 0; } ptrace(PTRACE_ATTACH, pid, NULL, NULL); while (1) { waitid(P_PID, pid, NULL, WSTOPPED); ptrace(PTRACE_SINGLESTEP, pid, NULL, (void *)(long)SIGSTOP); } return 0; } The child creates five threads and the parent continuously traps the first thread and whenever the child gets a signal, SIGSTOP is delivered. If an external process sends SIGSTOP to the child, all other threads in the process should reliably stop. However, due to the above bug, the first thread will often end up consuming group_stop_count multiple times and SIGSTOP often ends up stopping none or part of the other four threads. This patch adds a new field task->group_stop which is protected by siglock and uses GROUP_STOP_CONSUME flag to track which task is still to consume group_stop_count to fix this bug. task_clear_group_stop_pending() and task_participate_group_stop() are added to help manipulating group stop states. As ptrace_stop() now also uses task_participate_group_stop(), it will set SIGNAL_STOP_STOPPED if it completes a group stop. There still are many issues regarding the interaction between group stop and ptrace. Patches to address them will follow. - Oleg spotted duplicate GROUP_STOP_CONSUME. Dropped. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com>
2011-03-23 09:37:00 +00:00
*/
static bool task_participate_group_stop(struct task_struct *task)
{
struct signal_struct *sig = task->signal;
job control: rename signal->group_stop and flags to jobctl and update them signal->group_stop currently hosts mostly group stop related flags; however, it's gonna be used for wider purposes and the GROUP_STOP_ flag prefix becomes confusing. Rename signal->group_stop to signal->jobctl and rename all GROUP_STOP_* flags to JOBCTL_*. Bit position macros JOBCTL_*_BIT are defined and JOBCTL_* flags are defined in terms of them to allow using bitops later. While at it, reassign JOBCTL_TRAPPING to bit 22 to better accomodate future additions. This doesn't cause any functional change. -v2: JOBCTL_*_BIT macros added as suggested by Linus. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-02 09:13:59 +00:00
bool consume = task->jobctl & JOBCTL_STOP_CONSUME;
signal: Fix premature completion of group stop when interfered by ptrace task->signal->group_stop_count is used to track the progress of group stop. It's initialized to the number of tasks which need to stop for group stop to finish and each stopping or trapping task decrements. However, each task doesn't keep track of whether it decremented the counter or not and if woken up before the group stop is complete and stops again, it can decrement the counter multiple times. Please consider the following example code. static void *worker(void *arg) { while (1) ; return NULL; } int main(void) { pthread_t thread; pid_t pid; int i; pid = fork(); if (!pid) { for (i = 0; i < 5; i++) pthread_create(&thread, NULL, worker, NULL); while (1) ; return 0; } ptrace(PTRACE_ATTACH, pid, NULL, NULL); while (1) { waitid(P_PID, pid, NULL, WSTOPPED); ptrace(PTRACE_SINGLESTEP, pid, NULL, (void *)(long)SIGSTOP); } return 0; } The child creates five threads and the parent continuously traps the first thread and whenever the child gets a signal, SIGSTOP is delivered. If an external process sends SIGSTOP to the child, all other threads in the process should reliably stop. However, due to the above bug, the first thread will often end up consuming group_stop_count multiple times and SIGSTOP often ends up stopping none or part of the other four threads. This patch adds a new field task->group_stop which is protected by siglock and uses GROUP_STOP_CONSUME flag to track which task is still to consume group_stop_count to fix this bug. task_clear_group_stop_pending() and task_participate_group_stop() are added to help manipulating group stop states. As ptrace_stop() now also uses task_participate_group_stop(), it will set SIGNAL_STOP_STOPPED if it completes a group stop. There still are many issues regarding the interaction between group stop and ptrace. Patches to address them will follow. - Oleg spotted duplicate GROUP_STOP_CONSUME. Dropped. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com>
2011-03-23 09:37:00 +00:00
job control: rename signal->group_stop and flags to jobctl and update them signal->group_stop currently hosts mostly group stop related flags; however, it's gonna be used for wider purposes and the GROUP_STOP_ flag prefix becomes confusing. Rename signal->group_stop to signal->jobctl and rename all GROUP_STOP_* flags to JOBCTL_*. Bit position macros JOBCTL_*_BIT are defined and JOBCTL_* flags are defined in terms of them to allow using bitops later. While at it, reassign JOBCTL_TRAPPING to bit 22 to better accomodate future additions. This doesn't cause any functional change. -v2: JOBCTL_*_BIT macros added as suggested by Linus. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-02 09:13:59 +00:00
WARN_ON_ONCE(!(task->jobctl & JOBCTL_STOP_PENDING));
signal: Use GROUP_STOP_PENDING to stop once for a single group stop Currently task->signal->group_stop_count is used to decide whether to stop for group stop. However, if there is a task in the group which is taking a long time to stop, other tasks which are continued by ptrace would repeatedly stop for the same group stop until the group stop is complete. Conversely, if a ptraced task is in TASK_TRACED state, the debugger won't get notified of group stops which is inconsistent compared to the ptraced task in any other state. This patch introduces GROUP_STOP_PENDING which tracks whether a task is yet to stop for the group stop in progress. The flag is set when a group stop starts and cleared when the task stops the first time for the group stop, and consulted whenever whether the task should participate in a group stop needs to be determined. Note that now tasks in TASK_TRACED also participate in group stop. This results in the following behavior changes. * For a single group stop, a ptracer would see at most one stop reported. * A ptracee in TASK_TRACED now also participates in group stop and the tracer would get the notification. However, as a ptraced task could be in TASK_STOPPED state or any ptrace trap could consume group stop, the notification may still be missing. These will be addressed with further patches. * A ptracee may start a group stop while one is still in progress if the tracer let it continue with stop signal delivery. Group stop code handles this correctly. Oleg: * Spotted that a task might skip signal check even when its GROUP_STOP_PENDING is set. Fixed by updating recalc_sigpending_tsk() to check GROUP_STOP_PENDING instead of group_stop_count. * Pointed out that task->group_stop should be cleared whenever task->signal->group_stop_count is cleared. Fixed accordingly. * Pointed out the behavior inconsistency between TASK_TRACED and RUNNING and the last behavior change. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com>
2011-03-23 09:37:00 +00:00
job control: introduce JOBCTL_PENDING_MASK and task_clear_jobctl_pending() This patch introduces JOBCTL_PENDING_MASK and replaces task_clear_jobctl_stop_pending() with task_clear_jobctl_pending() which takes an extra @mask argument. JOBCTL_PENDING_MASK is currently equal to JOBCTL_STOP_PENDING but future patches will add more bits. recalc_sigpending_tsk() is updated to use JOBCTL_PENDING_MASK instead. task_clear_jobctl_pending() takes @mask which in subset of JOBCTL_PENDING_MASK and clears the relevant jobctl bits. If JOBCTL_STOP_PENDING is set, other STOP bits are cleared together. All task_clear_jobctl_stop_pending() users are updated to call task_clear_jobctl_pending() with JOBCTL_STOP_PENDING which is functionally identical to task_clear_jobctl_stop_pending(). This patch doesn't cause any functional change. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-02 09:14:00 +00:00
task_clear_jobctl_pending(task, JOBCTL_STOP_PENDING);
signal: Fix premature completion of group stop when interfered by ptrace task->signal->group_stop_count is used to track the progress of group stop. It's initialized to the number of tasks which need to stop for group stop to finish and each stopping or trapping task decrements. However, each task doesn't keep track of whether it decremented the counter or not and if woken up before the group stop is complete and stops again, it can decrement the counter multiple times. Please consider the following example code. static void *worker(void *arg) { while (1) ; return NULL; } int main(void) { pthread_t thread; pid_t pid; int i; pid = fork(); if (!pid) { for (i = 0; i < 5; i++) pthread_create(&thread, NULL, worker, NULL); while (1) ; return 0; } ptrace(PTRACE_ATTACH, pid, NULL, NULL); while (1) { waitid(P_PID, pid, NULL, WSTOPPED); ptrace(PTRACE_SINGLESTEP, pid, NULL, (void *)(long)SIGSTOP); } return 0; } The child creates five threads and the parent continuously traps the first thread and whenever the child gets a signal, SIGSTOP is delivered. If an external process sends SIGSTOP to the child, all other threads in the process should reliably stop. However, due to the above bug, the first thread will often end up consuming group_stop_count multiple times and SIGSTOP often ends up stopping none or part of the other four threads. This patch adds a new field task->group_stop which is protected by siglock and uses GROUP_STOP_CONSUME flag to track which task is still to consume group_stop_count to fix this bug. task_clear_group_stop_pending() and task_participate_group_stop() are added to help manipulating group stop states. As ptrace_stop() now also uses task_participate_group_stop(), it will set SIGNAL_STOP_STOPPED if it completes a group stop. There still are many issues regarding the interaction between group stop and ptrace. Patches to address them will follow. - Oleg spotted duplicate GROUP_STOP_CONSUME. Dropped. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com>
2011-03-23 09:37:00 +00:00
if (!consume)
return false;
if (!WARN_ON_ONCE(sig->group_stop_count == 0))
sig->group_stop_count--;
job control: Don't send duplicate job control stop notification while ptraced Just as group_exit_code shouldn't be generated when a PTRACE_CONT'd task re-enters job control stop, notifiction for the event should be suppressed too. The logic is the same as the group_exit_code generation suppression in do_signal_stop(), if SIGNAL_STOP_STOPPED is already set, the task is re-entering job control stop without intervening SIGCONT and the notifications should be suppressed. Test case follows. #include <stdio.h> #include <unistd.h> #include <signal.h> #include <time.h> #include <sys/ptrace.h> #include <sys/wait.h> static const struct timespec ts100ms = { .tv_nsec = 100000000 }; static pid_t tracee, tracer; static const char *pid_who(pid_t pid) { return pid == tracee ? "tracee" : (pid == tracer ? "tracer" : "mommy "); } static void sigchld_sigaction(int signo, siginfo_t *si, void *ucxt) { printf("%s: SIG status=%02d code=%02d (%s)\n", pid_who(getpid()), si->si_status, si->si_code, pid_who(si->si_pid)); } int main(void) { const struct sigaction chld_sa = { .sa_sigaction = sigchld_sigaction, .sa_flags = SA_SIGINFO|SA_RESTART }; siginfo_t si; sigaction(SIGCHLD, &chld_sa, NULL); tracee = fork(); if (!tracee) { tracee = getpid(); while (1) pause(); } kill(tracee, SIGSTOP); waitid(P_PID, tracee, &si, WSTOPPED); tracer = fork(); if (!tracer) { tracer = getpid(); ptrace(PTRACE_ATTACH, tracee, NULL, NULL); waitid(P_PID, tracee, &si, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, (void *)(long)si.si_status); waitid(P_PID, tracee, &si, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, (void *)(long)si.si_status); waitid(P_PID, tracee, &si, WSTOPPED); printf("tracer: detaching\n"); ptrace(PTRACE_DETACH, tracee, NULL, NULL); return 0; } while (1) pause(); return 0; } Before the patch, the parent gets the second notification for the tracee after the tracer detaches. si_status is zero because group_exit_code is not set by the group stop completion which triggered this notification. mommy : SIG status=19 code=05 (tracee) tracer: SIG status=00 code=05 (tracee) tracer: SIG status=19 code=04 (tracee) tracer: SIG status=00 code=05 (tracee) tracer: detaching mommy : SIG status=00 code=05 (tracee) mommy : SIG status=00 code=01 (tracer) ^C After the patch, the duplicate notification is gone. mommy : SIG status=19 code=05 (tracee) tracer: SIG status=00 code=05 (tracee) tracer: SIG status=19 code=04 (tracee) tracer: SIG status=00 code=05 (tracee) tracer: detaching mommy : SIG status=00 code=01 (tracer) ^C Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com>
2011-03-23 09:37:01 +00:00
/*
* Tell the caller to notify completion iff we are entering into a
* fresh group stop. Read comment in do_signal_stop() for details.
*/
if (!sig->group_stop_count && !(sig->flags & SIGNAL_STOP_STOPPED)) {
signal: protect SIGNAL_UNKILLABLE from unintentional clearing. Since commit 00cd5c37afd5 ("ptrace: permit ptracing of /sbin/init") we can now trace init processes. init is initially protected with SIGNAL_UNKILLABLE which will prevent fatal signals such as SIGSTOP, but there are a number of paths during tracing where SIGNAL_UNKILLABLE can be implicitly cleared. This can result in init becoming stoppable/killable after tracing. For example, running: while true; do kill -STOP 1; done & strace -p 1 and then stopping strace and the kill loop will result in init being left in state TASK_STOPPED. Sending SIGCONT to init will resume it, but init will now respond to future SIGSTOP signals rather than ignoring them. Make sure that when setting SIGNAL_STOP_CONTINUED/SIGNAL_STOP_STOPPED that we don't clear SIGNAL_UNKILLABLE. Link: http://lkml.kernel.org/r/20170104122017.25047-1-jamie.iles@oracle.com Signed-off-by: Jamie Iles <jamie.iles@oracle.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-11 00:57:54 +00:00
signal_set_stop_flags(sig, SIGNAL_STOP_STOPPED);
signal: Fix premature completion of group stop when interfered by ptrace task->signal->group_stop_count is used to track the progress of group stop. It's initialized to the number of tasks which need to stop for group stop to finish and each stopping or trapping task decrements. However, each task doesn't keep track of whether it decremented the counter or not and if woken up before the group stop is complete and stops again, it can decrement the counter multiple times. Please consider the following example code. static void *worker(void *arg) { while (1) ; return NULL; } int main(void) { pthread_t thread; pid_t pid; int i; pid = fork(); if (!pid) { for (i = 0; i < 5; i++) pthread_create(&thread, NULL, worker, NULL); while (1) ; return 0; } ptrace(PTRACE_ATTACH, pid, NULL, NULL); while (1) { waitid(P_PID, pid, NULL, WSTOPPED); ptrace(PTRACE_SINGLESTEP, pid, NULL, (void *)(long)SIGSTOP); } return 0; } The child creates five threads and the parent continuously traps the first thread and whenever the child gets a signal, SIGSTOP is delivered. If an external process sends SIGSTOP to the child, all other threads in the process should reliably stop. However, due to the above bug, the first thread will often end up consuming group_stop_count multiple times and SIGSTOP often ends up stopping none or part of the other four threads. This patch adds a new field task->group_stop which is protected by siglock and uses GROUP_STOP_CONSUME flag to track which task is still to consume group_stop_count to fix this bug. task_clear_group_stop_pending() and task_participate_group_stop() are added to help manipulating group stop states. As ptrace_stop() now also uses task_participate_group_stop(), it will set SIGNAL_STOP_STOPPED if it completes a group stop. There still are many issues regarding the interaction between group stop and ptrace. Patches to address them will follow. - Oleg spotted duplicate GROUP_STOP_CONSUME. Dropped. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com>
2011-03-23 09:37:00 +00:00
return true;
}
return false;
}
fork: Have new threads join on-going signal group stops There are only two signals that are delivered to every member of a signal group: SIGSTOP and SIGKILL. Signal delivery requires every signal appear to be delivered either before or after a clone syscall. SIGKILL terminates the clone so does not need to be considered. Which leaves only SIGSTOP that needs to be considered when creating new threads. Today in the event of a group stop TIF_SIGPENDING will get set and the fork will restart ensuring the fork syscall participates in the group stop. A fork (especially of a process with a lot of memory) is one of the most expensive system so we really only want to restart a fork when necessary. It is easy so check to see if a SIGSTOP is ongoing and have the new thread join it immediate after the clone completes. Making it appear the clone completed happened just before the SIGSTOP. The calculate_sigpending function will see the bits set in jobctl and set TIF_SIGPENDING to ensure the new task takes the slow path to userspace. V2: The call to task_join_group_stop was moved before the new task is added to the thread group list. This should not matter as sighand->siglock is held over both the addition of the threads, the call to task_join_group_stop and do_signal_stop. But the change is trivial and it is one less thing to worry about when reading the code. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-07-23 18:38:00 +00:00
void task_join_group_stop(struct task_struct *task)
{
/* Have the new thread join an on-going signal group stop */
unsigned long jobctl = current->jobctl;
if (jobctl & JOBCTL_STOP_PENDING) {
struct signal_struct *sig = current->signal;
unsigned long signr = jobctl & JOBCTL_STOP_SIGMASK;
unsigned long gstop = JOBCTL_STOP_PENDING | JOBCTL_STOP_CONSUME;
if (task_set_jobctl_pending(task, signr | gstop)) {
sig->group_stop_count++;
}
}
}
CRED: Use RCU to access another task's creds and to release a task's own creds Use RCU to access another task's creds and to release a task's own creds. This means that it will be possible for the credentials of a task to be replaced without another task (a) requiring a full lock to read them, and (b) seeing deallocated memory. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 23:39:19 +00:00
/*
* allocate a new signal queue record
* - this may be called without locks if and only if t == current, otherwise an
kernel/signal.c: fix typos and coding style General coding style and comment fixes; no code changes: - Use multi-line-comment coding style. - Put some function signatures completely on one line. - Hyphenate some words. - Spell Posix as POSIX. - Correct typos & spellos in some comments. - Drop trailing whitespace. - End sentences with periods. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-04 21:59:31 +00:00
* appropriate lock must be held to stop the target task from exiting
CRED: Use RCU to access another task's creds and to release a task's own creds Use RCU to access another task's creds and to release a task's own creds. This means that it will be possible for the credentials of a task to be replaced without another task (a) requiring a full lock to read them, and (b) seeing deallocated memory. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 23:39:19 +00:00
*/
signal: Print warning message when dropping signals When the system has too many timers or too many aggregate queued signals, the EAGAIN error is returned to application from kernel, including timer_create() [POSIX.1b]. It means that the app exceeded the limit of pending signals, but in general application writers do not expect this outcome and the current silent failure can cause rare app failures under very high load. This patch adds a new message when we reach the limit and if print_fatal_signals is enabled: task/1234: reached RLIMIT_SIGPENDING, dropping signal If you see this message and your system behaved unexpectedly, you can run following command to lift the limit: # ulimit -i unlimited With help from Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>. Signed-off-by: Naohiro Ooiwa <nooiwa@miraclelinux.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Cc: Roland McGrath <roland@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: oleg@redhat.com LKML-Reference: <4AF6E7E2.9080406@miraclelinux.com> [ Modified a few small details, gave surrounding code some love. ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-08 15:46:42 +00:00
static struct sigqueue *
__sigqueue_alloc(int sig, struct task_struct *t, gfp_t flags, int override_rlimit)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct sigqueue *q = NULL;
Make sure "user->sigpending" count is in sync The previous commit (45c18b0bb579b5c1b89f8c99f1b6ffa4c586ba08, aka "Fix unlikely (but possible) race condition on task->user access") fixed a potential oops due to __sigqueue_alloc() getting its "user" pointer out of sync with switch_user(), and accessing a user pointer that had been de-allocated on another CPU. It still left another (much less serious) problem, where a concurrent __sigqueue_alloc and swich_user could cause sigqueue_alloc to do signal pending reference counting for a _different_ user than the one it then actually ended up using. No oops, but we'd end up with the wrong signal accounting. Another case of Oleg's eagle-eyes picking up the problem. This is trivially fixed by just making sure we load whichever "user" structure we decide to use (it doesn't matter _which_ one we pick, we just need to pick one) just once. Acked-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Andrew Morton <akpm@osdl.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-04 21:03:00 +00:00
struct user_struct *user;
signal: avoid double atomic counter increments for user accounting When queueing a signal, we increment both the users count of pending signals (for RLIMIT_SIGPENDING tracking) and we increment the refcount of the user struct itself (because we keep a reference to the user in the signal structure in order to correctly account for it when freeing). That turns out to be fairly expensive, because both of them are atomic updates, and particularly under extreme signal handling pressure on big machines, you can get a lot of cache contention on the user struct. That can then cause horrid cacheline ping-pong when you do these multiple accesses. So change the reference counting to only pin the user for the _first_ pending signal, and to unpin it when the last pending signal is dequeued. That means that when a user sees a lot of concurrent signal queuing - which is the only situation when this matters - the only atomic access needed is generally the 'sigpending' count update. This was noticed because of a particularly odd timing artifact on a dual-socket 96C/192T Cascade Lake platform: when you get into bad contention, on that machine for some reason seems to be much worse when the contention happens in the upper 32-byte half of the cacheline. As a result, the kernel test robot will-it-scale 'signal1' benchmark had an odd performance regression simply due to random alignment of the 'struct user_struct' (and pointed to a completely unrelated and apparently nonsensical commit for the regression). Avoiding the double increments (and decrements on the dequeueing side, of course) makes for much less contention and hugely improved performance on that will-it-scale microbenchmark. Quoting Feng Tang: "It makes a big difference, that the performance score is tripled! bump from original 17000 to 54000. Also the gap between 5.0-rc6 and 5.0-rc6+Jiri's patch is reduced to around 2%" [ The "2% gap" is the odd cacheline placement difference on that platform: under the extreme contention case, the effect of which half of the cacheline was hot was 5%, so with the reduced contention the odd timing artifact is reduced too ] It does help in the non-contended case too, but is not nearly as noticeable. Reported-and-tested-by: Feng Tang <feng.tang@intel.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Philip Li <philip.li@intel.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-24 20:47:14 +00:00
int sigpending;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
Make sure "user->sigpending" count is in sync The previous commit (45c18b0bb579b5c1b89f8c99f1b6ffa4c586ba08, aka "Fix unlikely (but possible) race condition on task->user access") fixed a potential oops due to __sigqueue_alloc() getting its "user" pointer out of sync with switch_user(), and accessing a user pointer that had been de-allocated on another CPU. It still left another (much less serious) problem, where a concurrent __sigqueue_alloc and swich_user could cause sigqueue_alloc to do signal pending reference counting for a _different_ user than the one it then actually ended up using. No oops, but we'd end up with the wrong signal accounting. Another case of Oleg's eagle-eyes picking up the problem. This is trivially fixed by just making sure we load whichever "user" structure we decide to use (it doesn't matter _which_ one we pick, we just need to pick one) just once. Acked-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Andrew Morton <akpm@osdl.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-04 21:03:00 +00:00
/*
signals: Fix more rcu assumptions 1) Remove the misleading comment in __sigqueue_alloc() which claims that holding a spinlock is equivalent to rcu_read_lock(). 2) Add a rcu_read_lock/unlock around the __task_cred() access in __sigqueue_alloc() This needs to be revisited to remove the remaining users of read_lock(&tasklist_lock) but that's outside the scope of this patch. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <20091210004703.269843657@linutronix.de>
2009-12-10 00:53:21 +00:00
* Protect access to @t credentials. This can go away when all
* callers hold rcu read lock.
signal: avoid double atomic counter increments for user accounting When queueing a signal, we increment both the users count of pending signals (for RLIMIT_SIGPENDING tracking) and we increment the refcount of the user struct itself (because we keep a reference to the user in the signal structure in order to correctly account for it when freeing). That turns out to be fairly expensive, because both of them are atomic updates, and particularly under extreme signal handling pressure on big machines, you can get a lot of cache contention on the user struct. That can then cause horrid cacheline ping-pong when you do these multiple accesses. So change the reference counting to only pin the user for the _first_ pending signal, and to unpin it when the last pending signal is dequeued. That means that when a user sees a lot of concurrent signal queuing - which is the only situation when this matters - the only atomic access needed is generally the 'sigpending' count update. This was noticed because of a particularly odd timing artifact on a dual-socket 96C/192T Cascade Lake platform: when you get into bad contention, on that machine for some reason seems to be much worse when the contention happens in the upper 32-byte half of the cacheline. As a result, the kernel test robot will-it-scale 'signal1' benchmark had an odd performance regression simply due to random alignment of the 'struct user_struct' (and pointed to a completely unrelated and apparently nonsensical commit for the regression). Avoiding the double increments (and decrements on the dequeueing side, of course) makes for much less contention and hugely improved performance on that will-it-scale microbenchmark. Quoting Feng Tang: "It makes a big difference, that the performance score is tripled! bump from original 17000 to 54000. Also the gap between 5.0-rc6 and 5.0-rc6+Jiri's patch is reduced to around 2%" [ The "2% gap" is the odd cacheline placement difference on that platform: under the extreme contention case, the effect of which half of the cacheline was hot was 5%, so with the reduced contention the odd timing artifact is reduced too ] It does help in the non-contended case too, but is not nearly as noticeable. Reported-and-tested-by: Feng Tang <feng.tang@intel.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Philip Li <philip.li@intel.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-24 20:47:14 +00:00
*
* NOTE! A pending signal will hold on to the user refcount,
* and we get/put the refcount only when the sigpending count
* changes from/to zero.
Make sure "user->sigpending" count is in sync The previous commit (45c18b0bb579b5c1b89f8c99f1b6ffa4c586ba08, aka "Fix unlikely (but possible) race condition on task->user access") fixed a potential oops due to __sigqueue_alloc() getting its "user" pointer out of sync with switch_user(), and accessing a user pointer that had been de-allocated on another CPU. It still left another (much less serious) problem, where a concurrent __sigqueue_alloc and swich_user could cause sigqueue_alloc to do signal pending reference counting for a _different_ user than the one it then actually ended up using. No oops, but we'd end up with the wrong signal accounting. Another case of Oleg's eagle-eyes picking up the problem. This is trivially fixed by just making sure we load whichever "user" structure we decide to use (it doesn't matter _which_ one we pick, we just need to pick one) just once. Acked-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Andrew Morton <akpm@osdl.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-04 21:03:00 +00:00
*/
signals: Fix more rcu assumptions 1) Remove the misleading comment in __sigqueue_alloc() which claims that holding a spinlock is equivalent to rcu_read_lock(). 2) Add a rcu_read_lock/unlock around the __task_cred() access in __sigqueue_alloc() This needs to be revisited to remove the remaining users of read_lock(&tasklist_lock) but that's outside the scope of this patch. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <20091210004703.269843657@linutronix.de>
2009-12-10 00:53:21 +00:00
rcu_read_lock();
signal: avoid double atomic counter increments for user accounting When queueing a signal, we increment both the users count of pending signals (for RLIMIT_SIGPENDING tracking) and we increment the refcount of the user struct itself (because we keep a reference to the user in the signal structure in order to correctly account for it when freeing). That turns out to be fairly expensive, because both of them are atomic updates, and particularly under extreme signal handling pressure on big machines, you can get a lot of cache contention on the user struct. That can then cause horrid cacheline ping-pong when you do these multiple accesses. So change the reference counting to only pin the user for the _first_ pending signal, and to unpin it when the last pending signal is dequeued. That means that when a user sees a lot of concurrent signal queuing - which is the only situation when this matters - the only atomic access needed is generally the 'sigpending' count update. This was noticed because of a particularly odd timing artifact on a dual-socket 96C/192T Cascade Lake platform: when you get into bad contention, on that machine for some reason seems to be much worse when the contention happens in the upper 32-byte half of the cacheline. As a result, the kernel test robot will-it-scale 'signal1' benchmark had an odd performance regression simply due to random alignment of the 'struct user_struct' (and pointed to a completely unrelated and apparently nonsensical commit for the regression). Avoiding the double increments (and decrements on the dequeueing side, of course) makes for much less contention and hugely improved performance on that will-it-scale microbenchmark. Quoting Feng Tang: "It makes a big difference, that the performance score is tripled! bump from original 17000 to 54000. Also the gap between 5.0-rc6 and 5.0-rc6+Jiri's patch is reduced to around 2%" [ The "2% gap" is the odd cacheline placement difference on that platform: under the extreme contention case, the effect of which half of the cacheline was hot was 5%, so with the reduced contention the odd timing artifact is reduced too ] It does help in the non-contended case too, but is not nearly as noticeable. Reported-and-tested-by: Feng Tang <feng.tang@intel.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Philip Li <philip.li@intel.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-24 20:47:14 +00:00
user = __task_cred(t)->user;
sigpending = atomic_inc_return(&user->sigpending);
if (sigpending == 1)
get_uid(user);
signals: Fix more rcu assumptions 1) Remove the misleading comment in __sigqueue_alloc() which claims that holding a spinlock is equivalent to rcu_read_lock(). 2) Add a rcu_read_lock/unlock around the __task_cred() access in __sigqueue_alloc() This needs to be revisited to remove the remaining users of read_lock(&tasklist_lock) but that's outside the scope of this patch. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <20091210004703.269843657@linutronix.de>
2009-12-10 00:53:21 +00:00
rcu_read_unlock();
signal: Print warning message when dropping signals When the system has too many timers or too many aggregate queued signals, the EAGAIN error is returned to application from kernel, including timer_create() [POSIX.1b]. It means that the app exceeded the limit of pending signals, but in general application writers do not expect this outcome and the current silent failure can cause rare app failures under very high load. This patch adds a new message when we reach the limit and if print_fatal_signals is enabled: task/1234: reached RLIMIT_SIGPENDING, dropping signal If you see this message and your system behaved unexpectedly, you can run following command to lift the limit: # ulimit -i unlimited With help from Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>. Signed-off-by: Naohiro Ooiwa <nooiwa@miraclelinux.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Cc: Roland McGrath <roland@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: oleg@redhat.com LKML-Reference: <4AF6E7E2.9080406@miraclelinux.com> [ Modified a few small details, gave surrounding code some love. ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-08 15:46:42 +00:00
signal: avoid double atomic counter increments for user accounting When queueing a signal, we increment both the users count of pending signals (for RLIMIT_SIGPENDING tracking) and we increment the refcount of the user struct itself (because we keep a reference to the user in the signal structure in order to correctly account for it when freeing). That turns out to be fairly expensive, because both of them are atomic updates, and particularly under extreme signal handling pressure on big machines, you can get a lot of cache contention on the user struct. That can then cause horrid cacheline ping-pong when you do these multiple accesses. So change the reference counting to only pin the user for the _first_ pending signal, and to unpin it when the last pending signal is dequeued. That means that when a user sees a lot of concurrent signal queuing - which is the only situation when this matters - the only atomic access needed is generally the 'sigpending' count update. This was noticed because of a particularly odd timing artifact on a dual-socket 96C/192T Cascade Lake platform: when you get into bad contention, on that machine for some reason seems to be much worse when the contention happens in the upper 32-byte half of the cacheline. As a result, the kernel test robot will-it-scale 'signal1' benchmark had an odd performance regression simply due to random alignment of the 'struct user_struct' (and pointed to a completely unrelated and apparently nonsensical commit for the regression). Avoiding the double increments (and decrements on the dequeueing side, of course) makes for much less contention and hugely improved performance on that will-it-scale microbenchmark. Quoting Feng Tang: "It makes a big difference, that the performance score is tripled! bump from original 17000 to 54000. Also the gap between 5.0-rc6 and 5.0-rc6+Jiri's patch is reduced to around 2%" [ The "2% gap" is the odd cacheline placement difference on that platform: under the extreme contention case, the effect of which half of the cacheline was hot was 5%, so with the reduced contention the odd timing artifact is reduced too ] It does help in the non-contended case too, but is not nearly as noticeable. Reported-and-tested-by: Feng Tang <feng.tang@intel.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Philip Li <philip.li@intel.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-24 20:47:14 +00:00
if (override_rlimit || likely(sigpending <= task_rlimit(t, RLIMIT_SIGPENDING))) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
q = kmem_cache_alloc(sigqueue_cachep, flags);
signal: Print warning message when dropping signals When the system has too many timers or too many aggregate queued signals, the EAGAIN error is returned to application from kernel, including timer_create() [POSIX.1b]. It means that the app exceeded the limit of pending signals, but in general application writers do not expect this outcome and the current silent failure can cause rare app failures under very high load. This patch adds a new message when we reach the limit and if print_fatal_signals is enabled: task/1234: reached RLIMIT_SIGPENDING, dropping signal If you see this message and your system behaved unexpectedly, you can run following command to lift the limit: # ulimit -i unlimited With help from Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>. Signed-off-by: Naohiro Ooiwa <nooiwa@miraclelinux.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Cc: Roland McGrath <roland@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: oleg@redhat.com LKML-Reference: <4AF6E7E2.9080406@miraclelinux.com> [ Modified a few small details, gave surrounding code some love. ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-08 15:46:42 +00:00
} else {
print_dropped_signal(sig);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (unlikely(q == NULL)) {
signal: avoid double atomic counter increments for user accounting When queueing a signal, we increment both the users count of pending signals (for RLIMIT_SIGPENDING tracking) and we increment the refcount of the user struct itself (because we keep a reference to the user in the signal structure in order to correctly account for it when freeing). That turns out to be fairly expensive, because both of them are atomic updates, and particularly under extreme signal handling pressure on big machines, you can get a lot of cache contention on the user struct. That can then cause horrid cacheline ping-pong when you do these multiple accesses. So change the reference counting to only pin the user for the _first_ pending signal, and to unpin it when the last pending signal is dequeued. That means that when a user sees a lot of concurrent signal queuing - which is the only situation when this matters - the only atomic access needed is generally the 'sigpending' count update. This was noticed because of a particularly odd timing artifact on a dual-socket 96C/192T Cascade Lake platform: when you get into bad contention, on that machine for some reason seems to be much worse when the contention happens in the upper 32-byte half of the cacheline. As a result, the kernel test robot will-it-scale 'signal1' benchmark had an odd performance regression simply due to random alignment of the 'struct user_struct' (and pointed to a completely unrelated and apparently nonsensical commit for the regression). Avoiding the double increments (and decrements on the dequeueing side, of course) makes for much less contention and hugely improved performance on that will-it-scale microbenchmark. Quoting Feng Tang: "It makes a big difference, that the performance score is tripled! bump from original 17000 to 54000. Also the gap between 5.0-rc6 and 5.0-rc6+Jiri's patch is reduced to around 2%" [ The "2% gap" is the odd cacheline placement difference on that platform: under the extreme contention case, the effect of which half of the cacheline was hot was 5%, so with the reduced contention the odd timing artifact is reduced too ] It does help in the non-contended case too, but is not nearly as noticeable. Reported-and-tested-by: Feng Tang <feng.tang@intel.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Philip Li <philip.li@intel.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-24 20:47:14 +00:00
if (atomic_dec_and_test(&user->sigpending))
free_uid(user);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
} else {
INIT_LIST_HEAD(&q->list);
q->flags = 0;
CRED: Inaugurate COW credentials Inaugurate copy-on-write credentials management. This uses RCU to manage the credentials pointer in the task_struct with respect to accesses by other tasks. A process may only modify its own credentials, and so does not need locking to access or modify its own credentials. A mutex (cred_replace_mutex) is added to the task_struct to control the effect of PTRACE_ATTACHED on credential calculations, particularly with respect to execve(). With this patch, the contents of an active credentials struct may not be changed directly; rather a new set of credentials must be prepared, modified and committed using something like the following sequence of events: struct cred *new = prepare_creds(); int ret = blah(new); if (ret < 0) { abort_creds(new); return ret; } return commit_creds(new); There are some exceptions to this rule: the keyrings pointed to by the active credentials may be instantiated - keyrings violate the COW rule as managing COW keyrings is tricky, given that it is possible for a task to directly alter the keys in a keyring in use by another task. To help enforce this, various pointers to sets of credentials, such as those in the task_struct, are declared const. The purpose of this is compile-time discouragement of altering credentials through those pointers. Once a set of credentials has been made public through one of these pointers, it may not be modified, except under special circumstances: (1) Its reference count may incremented and decremented. (2) The keyrings to which it points may be modified, but not replaced. The only safe way to modify anything else is to create a replacement and commit using the functions described in Documentation/credentials.txt (which will be added by a later patch). This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). This now prepares and commits credentials in various places in the security code rather than altering the current creds directly. (2) Temporary credential overrides. do_coredump() and sys_faccessat() now prepare their own credentials and temporarily override the ones currently on the acting thread, whilst preventing interference from other threads by holding cred_replace_mutex on the thread being dumped. This will be replaced in a future patch by something that hands down the credentials directly to the functions being called, rather than altering the task's objective credentials. (3) LSM interface. A number of functions have been changed, added or removed: (*) security_capset_check(), ->capset_check() (*) security_capset_set(), ->capset_set() Removed in favour of security_capset(). (*) security_capset(), ->capset() New. This is passed a pointer to the new creds, a pointer to the old creds and the proposed capability sets. It should fill in the new creds or return an error. All pointers, barring the pointer to the new creds, are now const. (*) security_bprm_apply_creds(), ->bprm_apply_creds() Changed; now returns a value, which will cause the process to be killed if it's an error. (*) security_task_alloc(), ->task_alloc_security() Removed in favour of security_prepare_creds(). (*) security_cred_free(), ->cred_free() New. Free security data attached to cred->security. (*) security_prepare_creds(), ->cred_prepare() New. Duplicate any security data attached to cred->security. (*) security_commit_creds(), ->cred_commit() New. Apply any security effects for the upcoming installation of new security by commit_creds(). (*) security_task_post_setuid(), ->task_post_setuid() Removed in favour of security_task_fix_setuid(). (*) security_task_fix_setuid(), ->task_fix_setuid() Fix up the proposed new credentials for setuid(). This is used by cap_set_fix_setuid() to implicitly adjust capabilities in line with setuid() changes. Changes are made to the new credentials, rather than the task itself as in security_task_post_setuid(). (*) security_task_reparent_to_init(), ->task_reparent_to_init() Removed. Instead the task being reparented to init is referred directly to init's credentials. NOTE! This results in the loss of some state: SELinux's osid no longer records the sid of the thread that forked it. (*) security_key_alloc(), ->key_alloc() (*) security_key_permission(), ->key_permission() Changed. These now take cred pointers rather than task pointers to refer to the security context. (4) sys_capset(). This has been simplified and uses less locking. The LSM functions it calls have been merged. (5) reparent_to_kthreadd(). This gives the current thread the same credentials as init by simply using commit_thread() to point that way. (6) __sigqueue_alloc() and switch_uid() __sigqueue_alloc() can't stop the target task from changing its creds beneath it, so this function gets a reference to the currently applicable user_struct which it then passes into the sigqueue struct it returns if successful. switch_uid() is now called from commit_creds(), and possibly should be folded into that. commit_creds() should take care of protecting __sigqueue_alloc(). (7) [sg]et[ug]id() and co and [sg]et_current_groups. The set functions now all use prepare_creds(), commit_creds() and abort_creds() to build and check a new set of credentials before applying it. security_task_set[ug]id() is called inside the prepared section. This guarantees that nothing else will affect the creds until we've finished. The calling of set_dumpable() has been moved into commit_creds(). Much of the functionality of set_user() has been moved into commit_creds(). The get functions all simply access the data directly. (8) security_task_prctl() and cap_task_prctl(). security_task_prctl() has been modified to return -ENOSYS if it doesn't want to handle a function, or otherwise return the return value directly rather than through an argument. Additionally, cap_task_prctl() now prepares a new set of credentials, even if it doesn't end up using it. (9) Keyrings. A number of changes have been made to the keyrings code: (a) switch_uid_keyring(), copy_keys(), exit_keys() and suid_keys() have all been dropped and built in to the credentials functions directly. They may want separating out again later. (b) key_alloc() and search_process_keyrings() now take a cred pointer rather than a task pointer to specify the security context. (c) copy_creds() gives a new thread within the same thread group a new thread keyring if its parent had one, otherwise it discards the thread keyring. (d) The authorisation key now points directly to the credentials to extend the search into rather pointing to the task that carries them. (e) Installing thread, process or session keyrings causes a new set of credentials to be created, even though it's not strictly necessary for process or session keyrings (they're shared). (10) Usermode helper. The usermode helper code now carries a cred struct pointer in its subprocess_info struct instead of a new session keyring pointer. This set of credentials is derived from init_cred and installed on the new process after it has been cloned. call_usermodehelper_setup() allocates the new credentials and call_usermodehelper_freeinfo() discards them if they haven't been used. A special cred function (prepare_usermodeinfo_creds()) is provided specifically for call_usermodehelper_setup() to call. call_usermodehelper_setkeys() adjusts the credentials to sport the supplied keyring as the new session keyring. (11) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) selinux_setprocattr() no longer does its check for whether the current ptracer can access processes with the new SID inside the lock that covers getting the ptracer's SID. Whilst this lock ensures that the check is done with the ptracer pinned, the result is only valid until the lock is released, so there's no point doing it inside the lock. (12) is_single_threaded(). This function has been extracted from selinux_setprocattr() and put into a file of its own in the lib/ directory as join_session_keyring() now wants to use it too. The code in SELinux just checked to see whether a task shared mm_structs with other tasks (CLONE_VM), but that isn't good enough. We really want to know if they're part of the same thread group (CLONE_THREAD). (13) nfsd. The NFS server daemon now has to use the COW credentials to set the credentials it is going to use. It really needs to pass the credentials down to the functions it calls, but it can't do that until other patches in this series have been applied. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 23:39:23 +00:00
q->user = user;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
CRED: Inaugurate COW credentials Inaugurate copy-on-write credentials management. This uses RCU to manage the credentials pointer in the task_struct with respect to accesses by other tasks. A process may only modify its own credentials, and so does not need locking to access or modify its own credentials. A mutex (cred_replace_mutex) is added to the task_struct to control the effect of PTRACE_ATTACHED on credential calculations, particularly with respect to execve(). With this patch, the contents of an active credentials struct may not be changed directly; rather a new set of credentials must be prepared, modified and committed using something like the following sequence of events: struct cred *new = prepare_creds(); int ret = blah(new); if (ret < 0) { abort_creds(new); return ret; } return commit_creds(new); There are some exceptions to this rule: the keyrings pointed to by the active credentials may be instantiated - keyrings violate the COW rule as managing COW keyrings is tricky, given that it is possible for a task to directly alter the keys in a keyring in use by another task. To help enforce this, various pointers to sets of credentials, such as those in the task_struct, are declared const. The purpose of this is compile-time discouragement of altering credentials through those pointers. Once a set of credentials has been made public through one of these pointers, it may not be modified, except under special circumstances: (1) Its reference count may incremented and decremented. (2) The keyrings to which it points may be modified, but not replaced. The only safe way to modify anything else is to create a replacement and commit using the functions described in Documentation/credentials.txt (which will be added by a later patch). This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). This now prepares and commits credentials in various places in the security code rather than altering the current creds directly. (2) Temporary credential overrides. do_coredump() and sys_faccessat() now prepare their own credentials and temporarily override the ones currently on the acting thread, whilst preventing interference from other threads by holding cred_replace_mutex on the thread being dumped. This will be replaced in a future patch by something that hands down the credentials directly to the functions being called, rather than altering the task's objective credentials. (3) LSM interface. A number of functions have been changed, added or removed: (*) security_capset_check(), ->capset_check() (*) security_capset_set(), ->capset_set() Removed in favour of security_capset(). (*) security_capset(), ->capset() New. This is passed a pointer to the new creds, a pointer to the old creds and the proposed capability sets. It should fill in the new creds or return an error. All pointers, barring the pointer to the new creds, are now const. (*) security_bprm_apply_creds(), ->bprm_apply_creds() Changed; now returns a value, which will cause the process to be killed if it's an error. (*) security_task_alloc(), ->task_alloc_security() Removed in favour of security_prepare_creds(). (*) security_cred_free(), ->cred_free() New. Free security data attached to cred->security. (*) security_prepare_creds(), ->cred_prepare() New. Duplicate any security data attached to cred->security. (*) security_commit_creds(), ->cred_commit() New. Apply any security effects for the upcoming installation of new security by commit_creds(). (*) security_task_post_setuid(), ->task_post_setuid() Removed in favour of security_task_fix_setuid(). (*) security_task_fix_setuid(), ->task_fix_setuid() Fix up the proposed new credentials for setuid(). This is used by cap_set_fix_setuid() to implicitly adjust capabilities in line with setuid() changes. Changes are made to the new credentials, rather than the task itself as in security_task_post_setuid(). (*) security_task_reparent_to_init(), ->task_reparent_to_init() Removed. Instead the task being reparented to init is referred directly to init's credentials. NOTE! This results in the loss of some state: SELinux's osid no longer records the sid of the thread that forked it. (*) security_key_alloc(), ->key_alloc() (*) security_key_permission(), ->key_permission() Changed. These now take cred pointers rather than task pointers to refer to the security context. (4) sys_capset(). This has been simplified and uses less locking. The LSM functions it calls have been merged. (5) reparent_to_kthreadd(). This gives the current thread the same credentials as init by simply using commit_thread() to point that way. (6) __sigqueue_alloc() and switch_uid() __sigqueue_alloc() can't stop the target task from changing its creds beneath it, so this function gets a reference to the currently applicable user_struct which it then passes into the sigqueue struct it returns if successful. switch_uid() is now called from commit_creds(), and possibly should be folded into that. commit_creds() should take care of protecting __sigqueue_alloc(). (7) [sg]et[ug]id() and co and [sg]et_current_groups. The set functions now all use prepare_creds(), commit_creds() and abort_creds() to build and check a new set of credentials before applying it. security_task_set[ug]id() is called inside the prepared section. This guarantees that nothing else will affect the creds until we've finished. The calling of set_dumpable() has been moved into commit_creds(). Much of the functionality of set_user() has been moved into commit_creds(). The get functions all simply access the data directly. (8) security_task_prctl() and cap_task_prctl(). security_task_prctl() has been modified to return -ENOSYS if it doesn't want to handle a function, or otherwise return the return value directly rather than through an argument. Additionally, cap_task_prctl() now prepares a new set of credentials, even if it doesn't end up using it. (9) Keyrings. A number of changes have been made to the keyrings code: (a) switch_uid_keyring(), copy_keys(), exit_keys() and suid_keys() have all been dropped and built in to the credentials functions directly. They may want separating out again later. (b) key_alloc() and search_process_keyrings() now take a cred pointer rather than a task pointer to specify the security context. (c) copy_creds() gives a new thread within the same thread group a new thread keyring if its parent had one, otherwise it discards the thread keyring. (d) The authorisation key now points directly to the credentials to extend the search into rather pointing to the task that carries them. (e) Installing thread, process or session keyrings causes a new set of credentials to be created, even though it's not strictly necessary for process or session keyrings (they're shared). (10) Usermode helper. The usermode helper code now carries a cred struct pointer in its subprocess_info struct instead of a new session keyring pointer. This set of credentials is derived from init_cred and installed on the new process after it has been cloned. call_usermodehelper_setup() allocates the new credentials and call_usermodehelper_freeinfo() discards them if they haven't been used. A special cred function (prepare_usermodeinfo_creds()) is provided specifically for call_usermodehelper_setup() to call. call_usermodehelper_setkeys() adjusts the credentials to sport the supplied keyring as the new session keyring. (11) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) selinux_setprocattr() no longer does its check for whether the current ptracer can access processes with the new SID inside the lock that covers getting the ptracer's SID. Whilst this lock ensures that the check is done with the ptracer pinned, the result is only valid until the lock is released, so there's no point doing it inside the lock. (12) is_single_threaded(). This function has been extracted from selinux_setprocattr() and put into a file of its own in the lib/ directory as join_session_keyring() now wants to use it too. The code in SELinux just checked to see whether a task shared mm_structs with other tasks (CLONE_VM), but that isn't good enough. We really want to know if they're part of the same thread group (CLONE_THREAD). (13) nfsd. The NFS server daemon now has to use the COW credentials to set the credentials it is going to use. It really needs to pass the credentials down to the functions it calls, but it can't do that until other patches in this series have been applied. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 23:39:23 +00:00
return q;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
[PATCH] uninline __sigqueue_free() Five callsites. I dunno how all this crap got back in there :( Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03 11:04:41 +00:00
static void __sigqueue_free(struct sigqueue *q)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
if (q->flags & SIGQUEUE_PREALLOC)
return;
signal: avoid double atomic counter increments for user accounting When queueing a signal, we increment both the users count of pending signals (for RLIMIT_SIGPENDING tracking) and we increment the refcount of the user struct itself (because we keep a reference to the user in the signal structure in order to correctly account for it when freeing). That turns out to be fairly expensive, because both of them are atomic updates, and particularly under extreme signal handling pressure on big machines, you can get a lot of cache contention on the user struct. That can then cause horrid cacheline ping-pong when you do these multiple accesses. So change the reference counting to only pin the user for the _first_ pending signal, and to unpin it when the last pending signal is dequeued. That means that when a user sees a lot of concurrent signal queuing - which is the only situation when this matters - the only atomic access needed is generally the 'sigpending' count update. This was noticed because of a particularly odd timing artifact on a dual-socket 96C/192T Cascade Lake platform: when you get into bad contention, on that machine for some reason seems to be much worse when the contention happens in the upper 32-byte half of the cacheline. As a result, the kernel test robot will-it-scale 'signal1' benchmark had an odd performance regression simply due to random alignment of the 'struct user_struct' (and pointed to a completely unrelated and apparently nonsensical commit for the regression). Avoiding the double increments (and decrements on the dequeueing side, of course) makes for much less contention and hugely improved performance on that will-it-scale microbenchmark. Quoting Feng Tang: "It makes a big difference, that the performance score is tripled! bump from original 17000 to 54000. Also the gap between 5.0-rc6 and 5.0-rc6+Jiri's patch is reduced to around 2%" [ The "2% gap" is the odd cacheline placement difference on that platform: under the extreme contention case, the effect of which half of the cacheline was hot was 5%, so with the reduced contention the odd timing artifact is reduced too ] It does help in the non-contended case too, but is not nearly as noticeable. Reported-and-tested-by: Feng Tang <feng.tang@intel.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Philip Li <philip.li@intel.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-24 20:47:14 +00:00
if (atomic_dec_and_test(&q->user->sigpending))
free_uid(q->user);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
kmem_cache_free(sigqueue_cachep, q);
}
[PATCH] move __exit_signal() to kernel/exit.c __exit_signal() is private to release_task() now. I think it is better to make it static in kernel/exit.c and export flush_sigqueue() instead - this function is much more simple and straightforward. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-29 00:11:18 +00:00
void flush_sigqueue(struct sigpending *queue)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct sigqueue *q;
sigemptyset(&queue->signal);
while (!list_empty(&queue->list)) {
q = list_entry(queue->list.next, struct sigqueue , list);
list_del_init(&q->list);
__sigqueue_free(q);
}
}
/*
signals: don't abuse __flush_signals() in selinux_bprm_committed_creds() selinux_bprm_committed_creds()->__flush_signals() is not right, we shouldn't clear TIF_SIGPENDING unconditionally. There can be other reasons for signal_pending(): freezing(), JOBCTL_PENDING_MASK, and potentially more. Also change this code to check fatal_signal_pending() rather than SIGNAL_GROUP_EXIT, it looks a bit better. Now we can kill __flush_signals() before it finds another buggy user. Note: this code looks racy, we can flush a signal which was sent after the task SID has been updated. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Paul Moore <pmoore@redhat.com>
2015-06-04 20:22:16 +00:00
* Flush all pending signals for this kthread.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
[PATCH] rename __exit_sighand to cleanup_sighand Cosmetic, rename __exit_sighand to cleanup_sighand and move it close to copy_sighand(). This matches copy_signal/cleanup_signal naming, and I think it is easier to follow. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: "Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-29 00:11:17 +00:00
void flush_signals(struct task_struct *t)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
unsigned long flags;
spin_lock_irqsave(&t->sighand->siglock, flags);
signals: don't abuse __flush_signals() in selinux_bprm_committed_creds() selinux_bprm_committed_creds()->__flush_signals() is not right, we shouldn't clear TIF_SIGPENDING unconditionally. There can be other reasons for signal_pending(): freezing(), JOBCTL_PENDING_MASK, and potentially more. Also change this code to check fatal_signal_pending() rather than SIGNAL_GROUP_EXIT, it looks a bit better. Now we can kill __flush_signals() before it finds another buggy user. Note: this code looks racy, we can flush a signal which was sent after the task SID has been updated. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Paul Moore <pmoore@redhat.com>
2015-06-04 20:22:16 +00:00
clear_tsk_thread_flag(t, TIF_SIGPENDING);
flush_sigqueue(&t->pending);
flush_sigqueue(&t->signal->shared_pending);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
spin_unlock_irqrestore(&t->sighand->siglock, flags);
}
signal: Pair exports with their functions For readability and consistency with the other exports in kernel/signal.c pair the exports of signal sending functions with their functions, instead of having the exports in one big clump. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-13 17:26:35 +00:00
EXPORT_SYMBOL(flush_signals);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
posix-timers: Make them configurable Some embedded systems have no use for them. This removes about 25KB from the kernel binary size when configured out. Corresponding syscalls are routed to a stub logging the attempt to use those syscalls which should be enough of a clue if they were disabled without proper consideration. They are: timer_create, timer_gettime: timer_getoverrun, timer_settime, timer_delete, clock_adjtime, setitimer, getitimer, alarm. The clock_settime, clock_gettime, clock_getres and clock_nanosleep syscalls are replaced by simple wrappers compatible with CLOCK_REALTIME, CLOCK_MONOTONIC and CLOCK_BOOTTIME only which should cover the vast majority of use cases with very little code. Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: John Stultz <john.stultz@linaro.org> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: linux-kbuild@vger.kernel.org Cc: netdev@vger.kernel.org Cc: Michal Marek <mmarek@suse.com> Cc: Edward Cree <ecree@solarflare.com> Link: http://lkml.kernel.org/r/1478841010-28605-7-git-send-email-nicolas.pitre@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-11 05:10:10 +00:00
#ifdef CONFIG_POSIX_TIMERS
posix timers: discard SI_TIMER signals on exec Based on Roland's patch. This approach was suggested by Austin Clements from the very beginning, and then by Linus. As Austin pointed out, the execing task can be killed by SI_TIMER signal because exec flushes the signal handlers, but doesn't discard the pending signals generated by posix timers. Perhaps not a bug, but people find this surprising. See http://bugzilla.kernel.org/show_bug.cgi?id=10460 Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Austin Clements <amdragon+kernelbugzilla@mit.edu> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-26 16:55:42 +00:00
static void __flush_itimer_signals(struct sigpending *pending)
{
sigset_t signal, retain;
struct sigqueue *q, *n;
signal = pending->signal;
sigemptyset(&retain);
list_for_each_entry_safe(q, n, &pending->list, list) {
int sig = q->info.si_signo;
if (likely(q->info.si_code != SI_TIMER)) {
sigaddset(&retain, sig);
} else {
sigdelset(&signal, sig);
list_del_init(&q->list);
__sigqueue_free(q);
}
}
sigorsets(&pending->signal, &signal, &retain);
}
void flush_itimer_signals(void)
{
struct task_struct *tsk = current;
unsigned long flags;
spin_lock_irqsave(&tsk->sighand->siglock, flags);
__flush_itimer_signals(&tsk->pending);
__flush_itimer_signals(&tsk->signal->shared_pending);
spin_unlock_irqrestore(&tsk->sighand->siglock, flags);
}
posix-timers: Make them configurable Some embedded systems have no use for them. This removes about 25KB from the kernel binary size when configured out. Corresponding syscalls are routed to a stub logging the attempt to use those syscalls which should be enough of a clue if they were disabled without proper consideration. They are: timer_create, timer_gettime: timer_getoverrun, timer_settime, timer_delete, clock_adjtime, setitimer, getitimer, alarm. The clock_settime, clock_gettime, clock_getres and clock_nanosleep syscalls are replaced by simple wrappers compatible with CLOCK_REALTIME, CLOCK_MONOTONIC and CLOCK_BOOTTIME only which should cover the vast majority of use cases with very little code. Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: John Stultz <john.stultz@linaro.org> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: linux-kbuild@vger.kernel.org Cc: netdev@vger.kernel.org Cc: Michal Marek <mmarek@suse.com> Cc: Edward Cree <ecree@solarflare.com> Link: http://lkml.kernel.org/r/1478841010-28605-7-git-send-email-nicolas.pitre@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-11 05:10:10 +00:00
#endif
posix timers: discard SI_TIMER signals on exec Based on Roland's patch. This approach was suggested by Austin Clements from the very beginning, and then by Linus. As Austin pointed out, the execing task can be killed by SI_TIMER signal because exec flushes the signal handlers, but doesn't discard the pending signals generated by posix timers. Perhaps not a bug, but people find this surprising. See http://bugzilla.kernel.org/show_bug.cgi?id=10460 Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Austin Clements <amdragon+kernelbugzilla@mit.edu> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-26 16:55:42 +00:00
change kernel threads to ignore signals instead of blocking them Currently kernel threads use sigprocmask(SIG_BLOCK) to protect against signals. This doesn't prevent the signal delivery, this only blocks signal_wake_up(). Every "killall -33 kthreadd" means a "struct siginfo" leak. Change kthreadd_setup() to set all handlers to SIG_IGN instead of blocking them (make a new helper ignore_signals() for that). If the kernel thread needs some signal, it should use allow_signal() anyway, and in that case it should not use CLONE_SIGHAND. Note that we can't change daemonize() (should die!) in the same way, because it can be used along with CLONE_SIGHAND. This means that allow_signal() still should unblock the signal to work correctly with daemonize()ed threads. However, disallow_signal() doesn't block the signal any longer but ignores it. NOTE: with or without this patch the kernel threads are not protected from handle_stop_signal(), this seems harmless, but not good. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 09:34:37 +00:00
void ignore_signals(struct task_struct *t)
{
int i;
for (i = 0; i < _NSIG; ++i)
t->sighand->action[i].sa.sa_handler = SIG_IGN;
flush_signals(t);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* Flush all handlers for a task.
*/
void
flush_signal_handlers(struct task_struct *t, int force_default)
{
int i;
struct k_sigaction *ka = &t->sighand->action[0];
for (i = _NSIG ; i != 0 ; i--) {
if (force_default || ka->sa.sa_handler != SIG_IGN)
ka->sa.sa_handler = SIG_DFL;
ka->sa.sa_flags = 0;
kernel/signal.c: use __ARCH_HAS_SA_RESTORER instead of SA_RESTORER __ARCH_HAS_SA_RESTORER is the preferred conditional for use in 3.9 and later kernels, per Kees. Cc: Emese Revfy <re.emese@gmail.com> Cc: Emese Revfy <re.emese@gmail.com> Cc: PaX Team <pageexec@freemail.hu> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: Julien Tinnes <jln@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-13 21:59:34 +00:00
#ifdef __ARCH_HAS_SA_RESTORER
signal: always clear sa_restorer on execve When the new signal handlers are set up, the location of sa_restorer is not cleared, leaking a parent process's address space location to children. This allows for a potential bypass of the parent's ASLR by examining the sa_restorer value returned when calling sigaction(). Based on what should be considered "secret" about addresses, it only matters across the exec not the fork (since the VMAs haven't changed until the exec). But since exec sets SIG_DFL and keeps sa_restorer, this is where it should be fixed. Given the few uses of sa_restorer, a "set" function was not written since this would be the only use. Instead, we use __ARCH_HAS_SA_RESTORER, as already done in other places. Example of the leak before applying this patch: $ cat /proc/$$/maps ... 7fb9f3083000-7fb9f3238000 r-xp 00000000 fd:01 404469 .../libc-2.15.so ... $ ./leak ... 7f278bc74000-7f278be29000 r-xp 00000000 fd:01 404469 .../libc-2.15.so ... 1 0 (nil) 0x7fb9f30b94a0 2 4000000 (nil) 0x7f278bcaa4a0 3 4000000 (nil) 0x7f278bcaa4a0 4 0 (nil) 0x7fb9f30b94a0 ... [akpm@linux-foundation.org: use SA_RESTORER for backportability] Signed-off-by: Kees Cook <keescook@chromium.org> Reported-by: Emese Revfy <re.emese@gmail.com> Cc: Emese Revfy <re.emese@gmail.com> Cc: PaX Team <pageexec@freemail.hu> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: Julien Tinnes <jln@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-13 21:59:33 +00:00
ka->sa.sa_restorer = NULL;
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
sigemptyset(&ka->sa.sa_mask);
ka++;
}
}
signal: make unhandled_signal() return bool unhandled_signal() already behaves like a boolean function. Let's actually declare it as such too. All callers treat it as such too. Link: http://lkml.kernel.org/r/20180602103653.18181-13-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Morris <james.morris@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 05:00:34 +00:00
bool unhandled_signal(struct task_struct *tsk, int sig)
x86: i386-show-unhandled-signals-v3 This patch makes the i386 behave the same way that x86_64 does when a segfault happens. A line gets printed to the kernel log so that tools that need to check for failures can behave more uniformly between debug.show_unhandled_signals sysctl variable to 0 (or by doing echo 0 > /proc/sys/debug/exception-trace) Also, all of the lines being printed are now using printk_ratelimit() to deny the ability of DoS from a local user with a program like the following: main() { while (1) if (!fork()) *(int *)0 = 0; } This new revision also includes the fix that Andrew did which got rid of new sysctl that was added to the system in earlier versions of this. Also, 'show-unhandled-signals' sysctl has been renamed back to the old 'exception-trace' to avoid breakage of people's scripts. AK: Enabling by default for i386 will be likely controversal, but let's see what happens AK: Really folks, before complaining just fix your segfaults AK: I bet this will find a lot of silent issues Signed-off-by: Masoud Sharbiani <masouds@google.com> Signed-off-by: Andi Kleen <ak@suse.de> [ Personally, I've found the complaints useful on x86-64, so I'm all for this. That said, I wonder if we could do it more prettily.. -Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-22 09:12:28 +00:00
{
tracehook: tracehook_consider_fatal_signal This defines tracehook_consider_fatal_signal() has a fine-grained hook for deciding to skip the special cases for a fatal signal, as ptrace does. There is no change, only cleanup. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Reviewed-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 02:45:52 +00:00
void __user *handler = tsk->sighand->action[sig-1].sa.sa_handler;
pid namespaces: define is_global_init() and is_container_init() is_init() is an ambiguous name for the pid==1 check. Split it into is_global_init() and is_container_init(). A cgroup init has it's tsk->pid == 1. A global init also has it's tsk->pid == 1 and it's active pid namespace is the init_pid_ns. But rather than check the active pid namespace, compare the task structure with 'init_pid_ns.child_reaper', which is initialized during boot to the /sbin/init process and never changes. Changelog: 2.6.22-rc4-mm2-pidns1: - Use 'init_pid_ns.child_reaper' to determine if a given task is the global init (/sbin/init) process. This would improve performance and remove dependence on the task_pid(). 2.6.21-mm2-pidns2: - [Sukadev Bhattiprolu] Changed is_container_init() calls in {powerpc, ppc,avr32}/traps.c for the _exception() call to is_global_init(). This way, we kill only the cgroup if the cgroup's init has a bug rather than force a kernel panic. [akpm@linux-foundation.org: fix comment] [sukadev@us.ibm.com: Use is_global_init() in arch/m32r/mm/fault.c] [bunk@stusta.de: kernel/pid.c: remove unused exports] [sukadev@us.ibm.com: Fix capability.c to work with threaded init] Signed-off-by: Serge E. Hallyn <serue@us.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com> Acked-by: Pavel Emelianov <xemul@openvz.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Herbert Poetzel <herbert@13thfloor.at> Cc: Kirill Korotaev <dev@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 06:39:52 +00:00
if (is_global_init(tsk))
signal: make unhandled_signal() return bool unhandled_signal() already behaves like a boolean function. Let's actually declare it as such too. All callers treat it as such too. Link: http://lkml.kernel.org/r/20180602103653.18181-13-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Morris <james.morris@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 05:00:34 +00:00
return true;
tracehook: tracehook_consider_fatal_signal This defines tracehook_consider_fatal_signal() has a fine-grained hook for deciding to skip the special cases for a fatal signal, as ptrace does. There is no change, only cleanup. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Reviewed-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 02:45:52 +00:00
if (handler != SIG_IGN && handler != SIG_DFL)
signal: make unhandled_signal() return bool unhandled_signal() already behaves like a boolean function. Let's actually declare it as such too. All callers treat it as such too. Link: http://lkml.kernel.org/r/20180602103653.18181-13-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Morris <james.morris@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 05:00:34 +00:00
return false;
ptrace: kill trivial tracehooks At this point, tracehooks aren't useful to mainline kernel and mostly just add an extra layer of obfuscation. Although they have comments, without actual in-kernel users, it is difficult to tell what are their assumptions and they're actually trying to achieve. To mainline kernel, they just aren't worth keeping around. This patch kills the following trivial tracehooks. * Ones testing whether task is ptraced. Replace with ->ptrace test. tracehook_expect_breakpoints() tracehook_consider_ignored_signal() tracehook_consider_fatal_signal() * ptrace_event() wrappers. Call directly. tracehook_report_exec() tracehook_report_exit() tracehook_report_vfork_done() * ptrace_release_task() wrapper. Call directly. tracehook_finish_release_task() * noop tracehook_prepare_release_task() tracehook_report_death() This doesn't introduce any behavior change. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-17 14:50:37 +00:00
/* if ptraced, let the tracer determine */
return !tsk->ptrace;
x86: i386-show-unhandled-signals-v3 This patch makes the i386 behave the same way that x86_64 does when a segfault happens. A line gets printed to the kernel log so that tools that need to check for failures can behave more uniformly between debug.show_unhandled_signals sysctl variable to 0 (or by doing echo 0 > /proc/sys/debug/exception-trace) Also, all of the lines being printed are now using printk_ratelimit() to deny the ability of DoS from a local user with a program like the following: main() { while (1) if (!fork()) *(int *)0 = 0; } This new revision also includes the fix that Andrew did which got rid of new sysctl that was added to the system in earlier versions of this. Also, 'show-unhandled-signals' sysctl has been renamed back to the old 'exception-trace' to avoid breakage of people's scripts. AK: Enabling by default for i386 will be likely controversal, but let's see what happens AK: Really folks, before complaining just fix your segfaults AK: I bet this will find a lot of silent issues Signed-off-by: Masoud Sharbiani <masouds@google.com> Signed-off-by: Andi Kleen <ak@suse.de> [ Personally, I've found the complaints useful on x86-64, so I'm all for this. That said, I wonder if we could do it more prettily.. -Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-22 09:12:28 +00:00
}
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
static void collect_signal(int sig, struct sigpending *list, kernel_siginfo_t *info,
signal: Only reschedule timers on signals timers have sent Thomas Gleixner wrote: > The CRIU support added a 'feature' which allows a user space task to send > arbitrary (kernel) signals to itself. The changelog says: > > The kernel prevents sending of siginfo with positive si_code, because > these codes are reserved for kernel. I think we can allow a task to > send such a siginfo to itself. This operation should not be dangerous. > > Quite contrary to that claim, it turns out that it is outright dangerous > for signals with info->si_code == SI_TIMER. The following code sequence in > a user space task allows to crash the kernel: > > id = timer_create(CLOCK_XXX, ..... signo = SIGX); > timer_set(id, ....); > info->si_signo = SIGX; > info->si_code = SI_TIMER: > info->_sifields._timer._tid = id; > info->_sifields._timer._sys_private = 2; > rt_[tg]sigqueueinfo(..., SIGX, info); > sigemptyset(&sigset); > sigaddset(&sigset, SIGX); > rt_sigtimedwait(sigset, info); > > For timers based on CLOCK_PROCESS_CPUTIME_ID, CLOCK_THREAD_CPUTIME_ID this > results in a kernel crash because sigwait() dequeues the signal and the > dequeue code observes: > > info->si_code == SI_TIMER && info->_sifields._timer._sys_private != 0 > > which triggers the following callchain: > > do_schedule_next_timer() -> posix_cpu_timer_schedule() -> arm_timer() > > arm_timer() executes a list_add() on the timer, which is already armed via > the timer_set() syscall. That's a double list add which corrupts the posix > cpu timer list. As a consequence the kernel crashes on the next operation > touching the posix cpu timer list. > > Posix clocks which are internally implemented based on hrtimers are not > affected by this because hrtimer_start() can handle already armed timers > nicely, but it's a reliable way to trigger the WARN_ON() in > hrtimer_forward(), which complains about calling that function on an > already armed timer. This problem has existed since the posix timer code was merged into 2.5.63. A few releases earlier in 2.5.60 ptrace gained the ability to inject not just a signal (which linux has supported since 1.0) but the full siginfo of a signal. The core problem is that the code will reschedule in response to signals getting dequeued not just for signals the timers sent but for other signals that happen to a si_code of SI_TIMER. Avoid this confusion by testing to see if the queued signal was preallocated as all timer signals are preallocated, and so far only the timer code preallocates signals. Move the check for if a timer needs to be rescheduled up into collect_signal where the preallocation check must be performed, and pass the result back to dequeue_signal where the code reschedules timers. This makes it clear why the code cares about preallocated timers. Cc: stable@vger.kernel.org Reported-by: Thomas Gleixner <tglx@linutronix.de> History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Reference: 66dd34ad31e5 ("signal: allow to send any siginfo to itself") Reference: 1669ce53e2ff ("Add PTRACE_GETSIGINFO and PTRACE_SETSIGINFO") Fixes: db8b50ba75f2 ("[PATCH] POSIX clocks & timers") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-06-13 09:31:16 +00:00
bool *resched_timer)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct sigqueue *q, *first = NULL;
/*
* Collect the siginfo appropriate to this signal. Check if
* there is another siginfo for the same signal.
*/
list_for_each_entry(q, &list->list, list) {
if (q->info.si_signo == sig) {
signals: collect_signal: simplify the "still_pending" logic Factor out sigdelset() calls and remove the "still_pending" variable. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 08:47:28 +00:00
if (first)
goto still_pending;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
first = q;
}
}
signals: collect_signal: simplify the "still_pending" logic Factor out sigdelset() calls and remove the "still_pending" variable. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 08:47:28 +00:00
sigdelset(&list->signal, sig);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (first) {
signals: collect_signal: simplify the "still_pending" logic Factor out sigdelset() calls and remove the "still_pending" variable. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 08:47:28 +00:00
still_pending:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
list_del_init(&first->list);
copy_siginfo(info, &first->info);
signal: Only reschedule timers on signals timers have sent Thomas Gleixner wrote: > The CRIU support added a 'feature' which allows a user space task to send > arbitrary (kernel) signals to itself. The changelog says: > > The kernel prevents sending of siginfo with positive si_code, because > these codes are reserved for kernel. I think we can allow a task to > send such a siginfo to itself. This operation should not be dangerous. > > Quite contrary to that claim, it turns out that it is outright dangerous > for signals with info->si_code == SI_TIMER. The following code sequence in > a user space task allows to crash the kernel: > > id = timer_create(CLOCK_XXX, ..... signo = SIGX); > timer_set(id, ....); > info->si_signo = SIGX; > info->si_code = SI_TIMER: > info->_sifields._timer._tid = id; > info->_sifields._timer._sys_private = 2; > rt_[tg]sigqueueinfo(..., SIGX, info); > sigemptyset(&sigset); > sigaddset(&sigset, SIGX); > rt_sigtimedwait(sigset, info); > > For timers based on CLOCK_PROCESS_CPUTIME_ID, CLOCK_THREAD_CPUTIME_ID this > results in a kernel crash because sigwait() dequeues the signal and the > dequeue code observes: > > info->si_code == SI_TIMER && info->_sifields._timer._sys_private != 0 > > which triggers the following callchain: > > do_schedule_next_timer() -> posix_cpu_timer_schedule() -> arm_timer() > > arm_timer() executes a list_add() on the timer, which is already armed via > the timer_set() syscall. That's a double list add which corrupts the posix > cpu timer list. As a consequence the kernel crashes on the next operation > touching the posix cpu timer list. > > Posix clocks which are internally implemented based on hrtimers are not > affected by this because hrtimer_start() can handle already armed timers > nicely, but it's a reliable way to trigger the WARN_ON() in > hrtimer_forward(), which complains about calling that function on an > already armed timer. This problem has existed since the posix timer code was merged into 2.5.63. A few releases earlier in 2.5.60 ptrace gained the ability to inject not just a signal (which linux has supported since 1.0) but the full siginfo of a signal. The core problem is that the code will reschedule in response to signals getting dequeued not just for signals the timers sent but for other signals that happen to a si_code of SI_TIMER. Avoid this confusion by testing to see if the queued signal was preallocated as all timer signals are preallocated, and so far only the timer code preallocates signals. Move the check for if a timer needs to be rescheduled up into collect_signal where the preallocation check must be performed, and pass the result back to dequeue_signal where the code reschedules timers. This makes it clear why the code cares about preallocated timers. Cc: stable@vger.kernel.org Reported-by: Thomas Gleixner <tglx@linutronix.de> History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Reference: 66dd34ad31e5 ("signal: allow to send any siginfo to itself") Reference: 1669ce53e2ff ("Add PTRACE_GETSIGINFO and PTRACE_SETSIGINFO") Fixes: db8b50ba75f2 ("[PATCH] POSIX clocks & timers") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-06-13 09:31:16 +00:00
*resched_timer =
(first->flags & SIGQUEUE_PREALLOC) &&
(info->si_code == SI_TIMER) &&
(info->si_sys_private);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
__sigqueue_free(first);
} else {
kernel/signal.c: fix typos and coding style General coding style and comment fixes; no code changes: - Use multi-line-comment coding style. - Put some function signatures completely on one line. - Hyphenate some words. - Spell Posix as POSIX. - Correct typos & spellos in some comments. - Drop trailing whitespace. - End sentences with periods. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-04 21:59:31 +00:00
/*
* Ok, it wasn't in the queue. This must be
* a fast-pathed signal or we must have been
* out of queue space. So zero out the info.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
signal: Ensure generic siginfos the kernel sends have all bits initialized Call clear_siginfo to ensure stack allocated siginfos are fully initialized before being passed to the signal sending functions. This ensures that if there is the kind of confusion documented by TRAP_FIXME, FPE_FIXME, or BUS_FIXME the kernel won't send unitialized data to userspace when the kernel generates a signal with SI_USER but the copy to userspace assumes it is a different kind of signal, and different fields are initialized. This also prepares the way for turning copy_siginfo_to_user into a copy_to_user, by removing the need in many cases to perform a field by field copy simply to skip the uninitialized fields. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-05 23:27:42 +00:00
clear_siginfo(info);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
info->si_signo = sig;
info->si_errno = 0;
signals: cosmetic, collect_signal: use SI_USER Trivial, s/0/SI_USER/ in collect_signal() for grep. This is a bit confusing, we don't know the source of this signal. But we don't care, and "info->si_code = 0" is imho worse. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 00:47:24 +00:00
info->si_code = SI_USER;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
info->si_pid = 0;
info->si_uid = 0;
}
}
static int __dequeue_signal(struct sigpending *pending, sigset_t *mask,
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
kernel_siginfo_t *info, bool *resched_timer)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
[PATCH] __dequeue_signal() cleanup This tightens up __dequeue_signal a little. It also avoids doing recalc_sigpending twice in a row, instead doing it once in dequeue_signal. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-29 09:00:31 +00:00
int sig = next_signal(pending, mask);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
signals: kill block_all_signals() and unblock_all_signals() It is hardly possible to enumerate all problems with block_all_signals() and unblock_all_signals(). Just for example, 1. block_all_signals(SIGSTOP/etc) simply can't help if the caller is multithreaded. Another thread can dequeue the signal and force the group stop. 2. Even is the caller is single-threaded, it will "stop" anyway. It will not sleep, but it will spin in kernel space until SIGCONT or SIGKILL. And a lot more. In short, this interface doesn't work at all, at least the last 10+ years. Daniel said: Yeah the only times I played around with the DRM_LOCK stuff was when old drivers accidentally deadlocked - my impression is that the entire DRM_LOCK thing was never really tested properly ;-) Hence I'm all for purging where this leaks out of the drm subsystem. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Dave Airlie <airlied@redhat.com> Cc: Richard Weinberger <richard@nod.at> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-07 00:32:19 +00:00
if (sig)
signal: Only reschedule timers on signals timers have sent Thomas Gleixner wrote: > The CRIU support added a 'feature' which allows a user space task to send > arbitrary (kernel) signals to itself. The changelog says: > > The kernel prevents sending of siginfo with positive si_code, because > these codes are reserved for kernel. I think we can allow a task to > send such a siginfo to itself. This operation should not be dangerous. > > Quite contrary to that claim, it turns out that it is outright dangerous > for signals with info->si_code == SI_TIMER. The following code sequence in > a user space task allows to crash the kernel: > > id = timer_create(CLOCK_XXX, ..... signo = SIGX); > timer_set(id, ....); > info->si_signo = SIGX; > info->si_code = SI_TIMER: > info->_sifields._timer._tid = id; > info->_sifields._timer._sys_private = 2; > rt_[tg]sigqueueinfo(..., SIGX, info); > sigemptyset(&sigset); > sigaddset(&sigset, SIGX); > rt_sigtimedwait(sigset, info); > > For timers based on CLOCK_PROCESS_CPUTIME_ID, CLOCK_THREAD_CPUTIME_ID this > results in a kernel crash because sigwait() dequeues the signal and the > dequeue code observes: > > info->si_code == SI_TIMER && info->_sifields._timer._sys_private != 0 > > which triggers the following callchain: > > do_schedule_next_timer() -> posix_cpu_timer_schedule() -> arm_timer() > > arm_timer() executes a list_add() on the timer, which is already armed via > the timer_set() syscall. That's a double list add which corrupts the posix > cpu timer list. As a consequence the kernel crashes on the next operation > touching the posix cpu timer list. > > Posix clocks which are internally implemented based on hrtimers are not > affected by this because hrtimer_start() can handle already armed timers > nicely, but it's a reliable way to trigger the WARN_ON() in > hrtimer_forward(), which complains about calling that function on an > already armed timer. This problem has existed since the posix timer code was merged into 2.5.63. A few releases earlier in 2.5.60 ptrace gained the ability to inject not just a signal (which linux has supported since 1.0) but the full siginfo of a signal. The core problem is that the code will reschedule in response to signals getting dequeued not just for signals the timers sent but for other signals that happen to a si_code of SI_TIMER. Avoid this confusion by testing to see if the queued signal was preallocated as all timer signals are preallocated, and so far only the timer code preallocates signals. Move the check for if a timer needs to be rescheduled up into collect_signal where the preallocation check must be performed, and pass the result back to dequeue_signal where the code reschedules timers. This makes it clear why the code cares about preallocated timers. Cc: stable@vger.kernel.org Reported-by: Thomas Gleixner <tglx@linutronix.de> History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Reference: 66dd34ad31e5 ("signal: allow to send any siginfo to itself") Reference: 1669ce53e2ff ("Add PTRACE_GETSIGINFO and PTRACE_SETSIGINFO") Fixes: db8b50ba75f2 ("[PATCH] POSIX clocks & timers") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-06-13 09:31:16 +00:00
collect_signal(sig, pending, info, resched_timer);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return sig;
}
/*
kernel/signal.c: fix typos and coding style General coding style and comment fixes; no code changes: - Use multi-line-comment coding style. - Put some function signatures completely on one line. - Hyphenate some words. - Spell Posix as POSIX. - Correct typos & spellos in some comments. - Drop trailing whitespace. - End sentences with periods. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-04 21:59:31 +00:00
* Dequeue a signal and return the element to the caller, which is
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
* expected to free it.
*
* All callers have to hold the siglock.
*/
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
int dequeue_signal(struct task_struct *tsk, sigset_t *mask, kernel_siginfo_t *info)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
signal: Only reschedule timers on signals timers have sent Thomas Gleixner wrote: > The CRIU support added a 'feature' which allows a user space task to send > arbitrary (kernel) signals to itself. The changelog says: > > The kernel prevents sending of siginfo with positive si_code, because > these codes are reserved for kernel. I think we can allow a task to > send such a siginfo to itself. This operation should not be dangerous. > > Quite contrary to that claim, it turns out that it is outright dangerous > for signals with info->si_code == SI_TIMER. The following code sequence in > a user space task allows to crash the kernel: > > id = timer_create(CLOCK_XXX, ..... signo = SIGX); > timer_set(id, ....); > info->si_signo = SIGX; > info->si_code = SI_TIMER: > info->_sifields._timer._tid = id; > info->_sifields._timer._sys_private = 2; > rt_[tg]sigqueueinfo(..., SIGX, info); > sigemptyset(&sigset); > sigaddset(&sigset, SIGX); > rt_sigtimedwait(sigset, info); > > For timers based on CLOCK_PROCESS_CPUTIME_ID, CLOCK_THREAD_CPUTIME_ID this > results in a kernel crash because sigwait() dequeues the signal and the > dequeue code observes: > > info->si_code == SI_TIMER && info->_sifields._timer._sys_private != 0 > > which triggers the following callchain: > > do_schedule_next_timer() -> posix_cpu_timer_schedule() -> arm_timer() > > arm_timer() executes a list_add() on the timer, which is already armed via > the timer_set() syscall. That's a double list add which corrupts the posix > cpu timer list. As a consequence the kernel crashes on the next operation > touching the posix cpu timer list. > > Posix clocks which are internally implemented based on hrtimers are not > affected by this because hrtimer_start() can handle already armed timers > nicely, but it's a reliable way to trigger the WARN_ON() in > hrtimer_forward(), which complains about calling that function on an > already armed timer. This problem has existed since the posix timer code was merged into 2.5.63. A few releases earlier in 2.5.60 ptrace gained the ability to inject not just a signal (which linux has supported since 1.0) but the full siginfo of a signal. The core problem is that the code will reschedule in response to signals getting dequeued not just for signals the timers sent but for other signals that happen to a si_code of SI_TIMER. Avoid this confusion by testing to see if the queued signal was preallocated as all timer signals are preallocated, and so far only the timer code preallocates signals. Move the check for if a timer needs to be rescheduled up into collect_signal where the preallocation check must be performed, and pass the result back to dequeue_signal where the code reschedules timers. This makes it clear why the code cares about preallocated timers. Cc: stable@vger.kernel.org Reported-by: Thomas Gleixner <tglx@linutronix.de> History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Reference: 66dd34ad31e5 ("signal: allow to send any siginfo to itself") Reference: 1669ce53e2ff ("Add PTRACE_GETSIGINFO and PTRACE_SETSIGINFO") Fixes: db8b50ba75f2 ("[PATCH] POSIX clocks & timers") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-06-13 09:31:16 +00:00
bool resched_timer = false;
signals: clean dequeue_signal from excess checks and assignments The signr variable may be declared without initialization - it is set ro the return value from __dequeue_signal() right at the function beginning. Besides, after recalc_sigpending() two checks for signr to be not 0 may be merged into one. Both if-s become easier to read. Thanks to Oleg for pointing out mistakes in the first version of this patch. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:40 +00:00
int signr;
Fix signalfd interaction with thread-private signals Don't let signalfd dequeue private signals off other threads (in the case of things like SIGILL or SIGSEGV, trying to do so would result in undefined behaviour on who actually gets the signal, since they are force unblocked). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-11 22:16:18 +00:00
/* We only dequeue private signals from ourselves, we don't let
* signalfd steal them
*/
signal: Only reschedule timers on signals timers have sent Thomas Gleixner wrote: > The CRIU support added a 'feature' which allows a user space task to send > arbitrary (kernel) signals to itself. The changelog says: > > The kernel prevents sending of siginfo with positive si_code, because > these codes are reserved for kernel. I think we can allow a task to > send such a siginfo to itself. This operation should not be dangerous. > > Quite contrary to that claim, it turns out that it is outright dangerous > for signals with info->si_code == SI_TIMER. The following code sequence in > a user space task allows to crash the kernel: > > id = timer_create(CLOCK_XXX, ..... signo = SIGX); > timer_set(id, ....); > info->si_signo = SIGX; > info->si_code = SI_TIMER: > info->_sifields._timer._tid = id; > info->_sifields._timer._sys_private = 2; > rt_[tg]sigqueueinfo(..., SIGX, info); > sigemptyset(&sigset); > sigaddset(&sigset, SIGX); > rt_sigtimedwait(sigset, info); > > For timers based on CLOCK_PROCESS_CPUTIME_ID, CLOCK_THREAD_CPUTIME_ID this > results in a kernel crash because sigwait() dequeues the signal and the > dequeue code observes: > > info->si_code == SI_TIMER && info->_sifields._timer._sys_private != 0 > > which triggers the following callchain: > > do_schedule_next_timer() -> posix_cpu_timer_schedule() -> arm_timer() > > arm_timer() executes a list_add() on the timer, which is already armed via > the timer_set() syscall. That's a double list add which corrupts the posix > cpu timer list. As a consequence the kernel crashes on the next operation > touching the posix cpu timer list. > > Posix clocks which are internally implemented based on hrtimers are not > affected by this because hrtimer_start() can handle already armed timers > nicely, but it's a reliable way to trigger the WARN_ON() in > hrtimer_forward(), which complains about calling that function on an > already armed timer. This problem has existed since the posix timer code was merged into 2.5.63. A few releases earlier in 2.5.60 ptrace gained the ability to inject not just a signal (which linux has supported since 1.0) but the full siginfo of a signal. The core problem is that the code will reschedule in response to signals getting dequeued not just for signals the timers sent but for other signals that happen to a si_code of SI_TIMER. Avoid this confusion by testing to see if the queued signal was preallocated as all timer signals are preallocated, and so far only the timer code preallocates signals. Move the check for if a timer needs to be rescheduled up into collect_signal where the preallocation check must be performed, and pass the result back to dequeue_signal where the code reschedules timers. This makes it clear why the code cares about preallocated timers. Cc: stable@vger.kernel.org Reported-by: Thomas Gleixner <tglx@linutronix.de> History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Reference: 66dd34ad31e5 ("signal: allow to send any siginfo to itself") Reference: 1669ce53e2ff ("Add PTRACE_GETSIGINFO and PTRACE_SETSIGINFO") Fixes: db8b50ba75f2 ("[PATCH] POSIX clocks & timers") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-06-13 09:31:16 +00:00
signr = __dequeue_signal(&tsk->pending, mask, info, &resched_timer);
[PATCH] hrtimers: prevent possible itimer DoS Fix potential setitimer DoS with high-res timers by pushing itimer rearm processing to process context. [Fixes from: Ingo Molnar <mingo@elte.hu>] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: john stultz <johnstul@us.ibm.com> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 09:28:12 +00:00
if (!signr) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
signr = __dequeue_signal(&tsk->signal->shared_pending,
signal: Only reschedule timers on signals timers have sent Thomas Gleixner wrote: > The CRIU support added a 'feature' which allows a user space task to send > arbitrary (kernel) signals to itself. The changelog says: > > The kernel prevents sending of siginfo with positive si_code, because > these codes are reserved for kernel. I think we can allow a task to > send such a siginfo to itself. This operation should not be dangerous. > > Quite contrary to that claim, it turns out that it is outright dangerous > for signals with info->si_code == SI_TIMER. The following code sequence in > a user space task allows to crash the kernel: > > id = timer_create(CLOCK_XXX, ..... signo = SIGX); > timer_set(id, ....); > info->si_signo = SIGX; > info->si_code = SI_TIMER: > info->_sifields._timer._tid = id; > info->_sifields._timer._sys_private = 2; > rt_[tg]sigqueueinfo(..., SIGX, info); > sigemptyset(&sigset); > sigaddset(&sigset, SIGX); > rt_sigtimedwait(sigset, info); > > For timers based on CLOCK_PROCESS_CPUTIME_ID, CLOCK_THREAD_CPUTIME_ID this > results in a kernel crash because sigwait() dequeues the signal and the > dequeue code observes: > > info->si_code == SI_TIMER && info->_sifields._timer._sys_private != 0 > > which triggers the following callchain: > > do_schedule_next_timer() -> posix_cpu_timer_schedule() -> arm_timer() > > arm_timer() executes a list_add() on the timer, which is already armed via > the timer_set() syscall. That's a double list add which corrupts the posix > cpu timer list. As a consequence the kernel crashes on the next operation > touching the posix cpu timer list. > > Posix clocks which are internally implemented based on hrtimers are not > affected by this because hrtimer_start() can handle already armed timers > nicely, but it's a reliable way to trigger the WARN_ON() in > hrtimer_forward(), which complains about calling that function on an > already armed timer. This problem has existed since the posix timer code was merged into 2.5.63. A few releases earlier in 2.5.60 ptrace gained the ability to inject not just a signal (which linux has supported since 1.0) but the full siginfo of a signal. The core problem is that the code will reschedule in response to signals getting dequeued not just for signals the timers sent but for other signals that happen to a si_code of SI_TIMER. Avoid this confusion by testing to see if the queued signal was preallocated as all timer signals are preallocated, and so far only the timer code preallocates signals. Move the check for if a timer needs to be rescheduled up into collect_signal where the preallocation check must be performed, and pass the result back to dequeue_signal where the code reschedules timers. This makes it clear why the code cares about preallocated timers. Cc: stable@vger.kernel.org Reported-by: Thomas Gleixner <tglx@linutronix.de> History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Reference: 66dd34ad31e5 ("signal: allow to send any siginfo to itself") Reference: 1669ce53e2ff ("Add PTRACE_GETSIGINFO and PTRACE_SETSIGINFO") Fixes: db8b50ba75f2 ("[PATCH] POSIX clocks & timers") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-06-13 09:31:16 +00:00
mask, info, &resched_timer);
posix-timers: Make them configurable Some embedded systems have no use for them. This removes about 25KB from the kernel binary size when configured out. Corresponding syscalls are routed to a stub logging the attempt to use those syscalls which should be enough of a clue if they were disabled without proper consideration. They are: timer_create, timer_gettime: timer_getoverrun, timer_settime, timer_delete, clock_adjtime, setitimer, getitimer, alarm. The clock_settime, clock_gettime, clock_getres and clock_nanosleep syscalls are replaced by simple wrappers compatible with CLOCK_REALTIME, CLOCK_MONOTONIC and CLOCK_BOOTTIME only which should cover the vast majority of use cases with very little code. Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: John Stultz <john.stultz@linaro.org> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: linux-kbuild@vger.kernel.org Cc: netdev@vger.kernel.org Cc: Michal Marek <mmarek@suse.com> Cc: Edward Cree <ecree@solarflare.com> Link: http://lkml.kernel.org/r/1478841010-28605-7-git-send-email-nicolas.pitre@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-11 05:10:10 +00:00
#ifdef CONFIG_POSIX_TIMERS
[PATCH] hrtimers: prevent possible itimer DoS Fix potential setitimer DoS with high-res timers by pushing itimer rearm processing to process context. [Fixes from: Ingo Molnar <mingo@elte.hu>] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: john stultz <johnstul@us.ibm.com> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 09:28:12 +00:00
/*
* itimer signal ?
*
* itimers are process shared and we restart periodic
* itimers in the signal delivery path to prevent DoS
* attacks in the high resolution timer case. This is
kernel/signal.c: fix typos and coding style General coding style and comment fixes; no code changes: - Use multi-line-comment coding style. - Put some function signatures completely on one line. - Hyphenate some words. - Spell Posix as POSIX. - Correct typos & spellos in some comments. - Drop trailing whitespace. - End sentences with periods. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-04 21:59:31 +00:00
* compliant with the old way of self-restarting
[PATCH] hrtimers: prevent possible itimer DoS Fix potential setitimer DoS with high-res timers by pushing itimer rearm processing to process context. [Fixes from: Ingo Molnar <mingo@elte.hu>] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: john stultz <johnstul@us.ibm.com> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 09:28:12 +00:00
* itimers, as the SIGALRM is a legacy signal and only
* queued once. Changing the restart behaviour to
* restart the timer in the signal dequeue path is
* reducing the timer noise on heavy loaded !highres
* systems too.
*/
if (unlikely(signr == SIGALRM)) {
struct hrtimer *tmr = &tsk->signal->real_timer;
if (!hrtimer_is_queued(tmr) &&
ktime: Get rid of the union ktime is a union because the initial implementation stored the time in scalar nanoseconds on 64 bit machine and in a endianess optimized timespec variant for 32bit machines. The Y2038 cleanup removed the timespec variant and switched everything to scalar nanoseconds. The union remained, but become completely pointless. Get rid of the union and just keep ktime_t as simple typedef of type s64. The conversion was done with coccinelle and some manual mopping up. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
2016-12-25 10:38:40 +00:00
tsk->signal->it_real_incr != 0) {
[PATCH] hrtimers: prevent possible itimer DoS Fix potential setitimer DoS with high-res timers by pushing itimer rearm processing to process context. [Fixes from: Ingo Molnar <mingo@elte.hu>] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: john stultz <johnstul@us.ibm.com> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 09:28:12 +00:00
hrtimer_forward(tmr, tmr->base->get_time(),
tsk->signal->it_real_incr);
hrtimer_restart(tmr);
}
}
posix-timers: Make them configurable Some embedded systems have no use for them. This removes about 25KB from the kernel binary size when configured out. Corresponding syscalls are routed to a stub logging the attempt to use those syscalls which should be enough of a clue if they were disabled without proper consideration. They are: timer_create, timer_gettime: timer_getoverrun, timer_settime, timer_delete, clock_adjtime, setitimer, getitimer, alarm. The clock_settime, clock_gettime, clock_getres and clock_nanosleep syscalls are replaced by simple wrappers compatible with CLOCK_REALTIME, CLOCK_MONOTONIC and CLOCK_BOOTTIME only which should cover the vast majority of use cases with very little code. Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: John Stultz <john.stultz@linaro.org> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: linux-kbuild@vger.kernel.org Cc: netdev@vger.kernel.org Cc: Michal Marek <mmarek@suse.com> Cc: Edward Cree <ecree@solarflare.com> Link: http://lkml.kernel.org/r/1478841010-28605-7-git-send-email-nicolas.pitre@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-11 05:10:10 +00:00
#endif
[PATCH] hrtimers: prevent possible itimer DoS Fix potential setitimer DoS with high-res timers by pushing itimer rearm processing to process context. [Fixes from: Ingo Molnar <mingo@elte.hu>] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: john stultz <johnstul@us.ibm.com> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 09:28:12 +00:00
}
signals: clean dequeue_signal from excess checks and assignments The signr variable may be declared without initialization - it is set ro the return value from __dequeue_signal() right at the function beginning. Besides, after recalc_sigpending() two checks for signr to be not 0 may be merged into one. Both if-s become easier to read. Thanks to Oleg for pointing out mistakes in the first version of this patch. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:40 +00:00
signalfd simplification This simplifies signalfd code, by avoiding it to remain attached to the sighand during its lifetime. In this way, the signalfd remain attached to the sighand only during poll(2) (and select and epoll) and read(2). This also allows to remove all the custom "tsk == current" checks in kernel/signal.c, since dequeue_signal() will only be called by "current". I think this is also what Ben was suggesting time ago. The external effect of this, is that a thread can extract only its own private signals and the group ones. I think this is an acceptable behaviour, in that those are the signals the thread would be able to fetch w/out signalfd. Signed-off-by: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-20 19:40:16 +00:00
recalc_sigpending();
signals: clean dequeue_signal from excess checks and assignments The signr variable may be declared without initialization - it is set ro the return value from __dequeue_signal() right at the function beginning. Besides, after recalc_sigpending() two checks for signr to be not 0 may be merged into one. Both if-s become easier to read. Thanks to Oleg for pointing out mistakes in the first version of this patch. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:40 +00:00
if (!signr)
return 0;
if (unlikely(sig_kernel_stop(signr))) {
[PATCH] hrtimers: prevent possible itimer DoS Fix potential setitimer DoS with high-res timers by pushing itimer rearm processing to process context. [Fixes from: Ingo Molnar <mingo@elte.hu>] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: john stultz <johnstul@us.ibm.com> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 09:28:12 +00:00
/*
* Set a marker that we have dequeued a stop signal. Our
* caller might release the siglock and then the pending
* stop signal it is about to process is no longer in the
* pending bitmasks, but must still be cleared by a SIGCONT
* (and overruled by a SIGKILL). So those cases clear this
* shared flag after we've set it. Note that this flag may
* remain set after the signal we return is ignored or
* handled. That doesn't matter because its only purpose
* is to alert stop-signal processing code when another
* processor has come along and cleared the flag.
*/
job control: rename signal->group_stop and flags to jobctl and update them signal->group_stop currently hosts mostly group stop related flags; however, it's gonna be used for wider purposes and the GROUP_STOP_ flag prefix becomes confusing. Rename signal->group_stop to signal->jobctl and rename all GROUP_STOP_* flags to JOBCTL_*. Bit position macros JOBCTL_*_BIT are defined and JOBCTL_* flags are defined in terms of them to allow using bitops later. While at it, reassign JOBCTL_TRAPPING to bit 22 to better accomodate future additions. This doesn't cause any functional change. -v2: JOBCTL_*_BIT macros added as suggested by Linus. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-02 09:13:59 +00:00
current->jobctl |= JOBCTL_STOP_DEQUEUED;
[PATCH] hrtimers: prevent possible itimer DoS Fix potential setitimer DoS with high-res timers by pushing itimer rearm processing to process context. [Fixes from: Ingo Molnar <mingo@elte.hu>] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: john stultz <johnstul@us.ibm.com> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 09:28:12 +00:00
}
posix-timers: Make them configurable Some embedded systems have no use for them. This removes about 25KB from the kernel binary size when configured out. Corresponding syscalls are routed to a stub logging the attempt to use those syscalls which should be enough of a clue if they were disabled without proper consideration. They are: timer_create, timer_gettime: timer_getoverrun, timer_settime, timer_delete, clock_adjtime, setitimer, getitimer, alarm. The clock_settime, clock_gettime, clock_getres and clock_nanosleep syscalls are replaced by simple wrappers compatible with CLOCK_REALTIME, CLOCK_MONOTONIC and CLOCK_BOOTTIME only which should cover the vast majority of use cases with very little code. Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: John Stultz <john.stultz@linaro.org> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: linux-kbuild@vger.kernel.org Cc: netdev@vger.kernel.org Cc: Michal Marek <mmarek@suse.com> Cc: Edward Cree <ecree@solarflare.com> Link: http://lkml.kernel.org/r/1478841010-28605-7-git-send-email-nicolas.pitre@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-11 05:10:10 +00:00
#ifdef CONFIG_POSIX_TIMERS
signal: Only reschedule timers on signals timers have sent Thomas Gleixner wrote: > The CRIU support added a 'feature' which allows a user space task to send > arbitrary (kernel) signals to itself. The changelog says: > > The kernel prevents sending of siginfo with positive si_code, because > these codes are reserved for kernel. I think we can allow a task to > send such a siginfo to itself. This operation should not be dangerous. > > Quite contrary to that claim, it turns out that it is outright dangerous > for signals with info->si_code == SI_TIMER. The following code sequence in > a user space task allows to crash the kernel: > > id = timer_create(CLOCK_XXX, ..... signo = SIGX); > timer_set(id, ....); > info->si_signo = SIGX; > info->si_code = SI_TIMER: > info->_sifields._timer._tid = id; > info->_sifields._timer._sys_private = 2; > rt_[tg]sigqueueinfo(..., SIGX, info); > sigemptyset(&sigset); > sigaddset(&sigset, SIGX); > rt_sigtimedwait(sigset, info); > > For timers based on CLOCK_PROCESS_CPUTIME_ID, CLOCK_THREAD_CPUTIME_ID this > results in a kernel crash because sigwait() dequeues the signal and the > dequeue code observes: > > info->si_code == SI_TIMER && info->_sifields._timer._sys_private != 0 > > which triggers the following callchain: > > do_schedule_next_timer() -> posix_cpu_timer_schedule() -> arm_timer() > > arm_timer() executes a list_add() on the timer, which is already armed via > the timer_set() syscall. That's a double list add which corrupts the posix > cpu timer list. As a consequence the kernel crashes on the next operation > touching the posix cpu timer list. > > Posix clocks which are internally implemented based on hrtimers are not > affected by this because hrtimer_start() can handle already armed timers > nicely, but it's a reliable way to trigger the WARN_ON() in > hrtimer_forward(), which complains about calling that function on an > already armed timer. This problem has existed since the posix timer code was merged into 2.5.63. A few releases earlier in 2.5.60 ptrace gained the ability to inject not just a signal (which linux has supported since 1.0) but the full siginfo of a signal. The core problem is that the code will reschedule in response to signals getting dequeued not just for signals the timers sent but for other signals that happen to a si_code of SI_TIMER. Avoid this confusion by testing to see if the queued signal was preallocated as all timer signals are preallocated, and so far only the timer code preallocates signals. Move the check for if a timer needs to be rescheduled up into collect_signal where the preallocation check must be performed, and pass the result back to dequeue_signal where the code reschedules timers. This makes it clear why the code cares about preallocated timers. Cc: stable@vger.kernel.org Reported-by: Thomas Gleixner <tglx@linutronix.de> History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Reference: 66dd34ad31e5 ("signal: allow to send any siginfo to itself") Reference: 1669ce53e2ff ("Add PTRACE_GETSIGINFO and PTRACE_SETSIGINFO") Fixes: db8b50ba75f2 ("[PATCH] POSIX clocks & timers") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-06-13 09:31:16 +00:00
if (resched_timer) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* Release the siglock to ensure proper locking order
* of timer locks outside of siglocks. Note, we leave
* irqs disabled here, since the posix-timers code is
* about to disable them again anyway.
*/
spin_unlock(&tsk->sighand->siglock);
posix-timers: Rename do_schedule_next_timer That function is a misnomer. Rename it with a proper prefix to posixtimer_rearm(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/20170530211656.811362578@linutronix.de
2017-05-30 21:15:46 +00:00
posixtimer_rearm(info);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
spin_lock(&tsk->sighand->siglock);
signal: Clear si_sys_private before copying siginfo to userspace In preparation for unconditionally copying the whole of siginfo to userspace clear si_sys_private. So this kernel internal value is guaranteed not to make it to userspace. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-24 19:53:03 +00:00
/* Don't expose the si_sys_private value to userspace */
info->si_sys_private = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
posix-timers: Make them configurable Some embedded systems have no use for them. This removes about 25KB from the kernel binary size when configured out. Corresponding syscalls are routed to a stub logging the attempt to use those syscalls which should be enough of a clue if they were disabled without proper consideration. They are: timer_create, timer_gettime: timer_getoverrun, timer_settime, timer_delete, clock_adjtime, setitimer, getitimer, alarm. The clock_settime, clock_gettime, clock_getres and clock_nanosleep syscalls are replaced by simple wrappers compatible with CLOCK_REALTIME, CLOCK_MONOTONIC and CLOCK_BOOTTIME only which should cover the vast majority of use cases with very little code. Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: John Stultz <john.stultz@linaro.org> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: linux-kbuild@vger.kernel.org Cc: netdev@vger.kernel.org Cc: Michal Marek <mmarek@suse.com> Cc: Edward Cree <ecree@solarflare.com> Link: http://lkml.kernel.org/r/1478841010-28605-7-git-send-email-nicolas.pitre@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-11 05:10:10 +00:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return signr;
}
signal: Pair exports with their functions For readability and consistency with the other exports in kernel/signal.c pair the exports of signal sending functions with their functions, instead of having the exports in one big clump. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-13 17:26:35 +00:00
EXPORT_SYMBOL_GPL(dequeue_signal);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
signal: Better detection of synchronous signals Recently syzkaller was able to create unkillablle processes by creating a timer that is delivered as a thread local signal on SIGHUP, and receiving SIGHUP SA_NODEFERER. Ultimately causing a loop failing to deliver SIGHUP but always trying. When the stack overflows delivery of SIGHUP fails and force_sigsegv is called. Unfortunately because SIGSEGV is numerically higher than SIGHUP next_signal tries again to deliver a SIGHUP. From a quality of implementation standpoint attempting to deliver the timer SIGHUP signal is wrong. We should attempt to deliver the synchronous SIGSEGV signal we just forced. We can make that happening in a fairly straight forward manner by instead of just looking at the signal number we also look at the si_code. In particular for exceptions (aka synchronous signals) the si_code is always greater than 0. That still has the potential to pick up a number of asynchronous signals as in a few cases the same si_codes that are used for synchronous signals are also used for asynchronous signals, and SI_KERNEL is also included in the list of possible si_codes. Still the heuristic is much better and timer signals are definitely excluded. Which is enough to prevent all known ways for someone sending a process signals fast enough to cause unexpected and arguably incorrect behavior. Cc: stable@vger.kernel.org Fixes: a27341cd5fcb ("Prioritize synchronous signals over 'normal' signals") Tested-by: Dmitry Vyukov <dvyukov@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-02-06 23:51:47 +00:00
static int dequeue_synchronous_signal(kernel_siginfo_t *info)
{
struct task_struct *tsk = current;
struct sigpending *pending = &tsk->pending;
struct sigqueue *q, *sync = NULL;
/*
* Might a synchronous signal be in the queue?
*/
if (!((pending->signal.sig[0] & ~tsk->blocked.sig[0]) & SYNCHRONOUS_MASK))
return 0;
/*
* Return the first synchronous signal in the queue.
*/
list_for_each_entry(q, &pending->list, list) {
/* Synchronous signals have a postive si_code */
if ((q->info.si_code > SI_USER) &&
(sigmask(q->info.si_signo) & SYNCHRONOUS_MASK)) {
sync = q;
goto next;
}
}
return 0;
next:
/*
* Check if there is another siginfo for the same signal.
*/
list_for_each_entry_continue(q, &pending->list, list) {
if (q->info.si_signo == sync->info.si_signo)
goto still_pending;
}
sigdelset(&pending->signal, sync->info.si_signo);
recalc_sigpending();
still_pending:
list_del_init(&sync->list);
copy_siginfo(info, &sync->info);
__sigqueue_free(sync);
return info->si_signo;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* Tell a process that it has a new active signal..
*
* NOTE! we rely on the previous spin_lock to
* lock interrupts for us! We can only be called with
* "siglock" held, and the local interrupt must
* have been disabled when that got acquired!
*
* No need to set need_resched since signal event passing
* goes through ->blocked
*/
ptrace: introduce signal_wake_up_state() and ptrace_signal_wake_up() Cleanup and preparation for the next change. signal_wake_up(resume => true) is overused. None of ptrace/jctl callers actually want to wakeup a TASK_WAKEKILL task, but they can't specify the necessary mask. Turn signal_wake_up() into signal_wake_up_state(state), reintroduce signal_wake_up() as a trivial helper, and add ptrace_signal_wake_up() which adds __TASK_TRACED. This way ptrace_signal_wake_up() can work "inside" ptrace_request() even if the tracee doesn't have the TASK_WAKEKILL bit set. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-21 19:47:41 +00:00
void signal_wake_up_state(struct task_struct *t, unsigned int state)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
set_tsk_thread_flag(t, TIF_SIGPENDING);
/*
ptrace: introduce signal_wake_up_state() and ptrace_signal_wake_up() Cleanup and preparation for the next change. signal_wake_up(resume => true) is overused. None of ptrace/jctl callers actually want to wakeup a TASK_WAKEKILL task, but they can't specify the necessary mask. Turn signal_wake_up() into signal_wake_up_state(state), reintroduce signal_wake_up() as a trivial helper, and add ptrace_signal_wake_up() which adds __TASK_TRACED. This way ptrace_signal_wake_up() can work "inside" ptrace_request() even if the tracee doesn't have the TASK_WAKEKILL bit set. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-21 19:47:41 +00:00
* TASK_WAKEKILL also means wake it up in the stopped/traced/killable
Add TASK_WAKEKILL Set TASK_WAKEKILL for TASK_STOPPED and TASK_TRACED, add TASK_KILLABLE and use TASK_WAKEKILL in signal_wake_up() Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2007-12-06 16:13:16 +00:00
* case. We don't check t->state here because there is a race with it
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
* executing another processor and just now entering stopped state.
* By using wake_up_state, we ensure the process will wake up and
* handle its death signal.
*/
ptrace: introduce signal_wake_up_state() and ptrace_signal_wake_up() Cleanup and preparation for the next change. signal_wake_up(resume => true) is overused. None of ptrace/jctl callers actually want to wakeup a TASK_WAKEKILL task, but they can't specify the necessary mask. Turn signal_wake_up() into signal_wake_up_state(state), reintroduce signal_wake_up() as a trivial helper, and add ptrace_signal_wake_up() which adds __TASK_TRACED. This way ptrace_signal_wake_up() can work "inside" ptrace_request() even if the tracee doesn't have the TASK_WAKEKILL bit set. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-21 19:47:41 +00:00
if (!wake_up_state(t, state | TASK_INTERRUPTIBLE))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
kick_process(t);
}
[PATCH] sigaction should clear all signals on SIG_IGN, not just < 32 While rooting aroung in the signal code trying to understand how to fix the SIG_IGN ploy (set sig handler to SIG_IGN and flood system with high speed repeating timers) I came across what, I think, is a problem in sigaction() in that when processing a SIG_IGN request it flushes signals from 1 to SIGRTMIN and leaves the rest. Attempt to fix this. Signed-off-by: George Anzinger <george@mvista.com> Cc: Roland McGrath <roland@redhat.com> Cc: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 09:02:48 +00:00
/*
* Remove signals in mask from the pending set and queue.
* Returns 1 if any signals were found.
*
* All callers must be holding the siglock.
*/
signal: make flush_sigqueue_mask() void The return value of flush_sigqueue_mask() is never checked anywhere. Link: http://lkml.kernel.org/r/20180602103653.18181-14-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Morris <james.morris@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 05:00:38 +00:00
static void flush_sigqueue_mask(sigset_t *mask, struct sigpending *s)
[PATCH] sigaction should clear all signals on SIG_IGN, not just < 32 While rooting aroung in the signal code trying to understand how to fix the SIG_IGN ploy (set sig handler to SIG_IGN and flood system with high speed repeating timers) I came across what, I think, is a problem in sigaction() in that when processing a SIG_IGN request it flushes signals from 1 to SIGRTMIN and leaves the rest. Attempt to fix this. Signed-off-by: George Anzinger <george@mvista.com> Cc: Roland McGrath <roland@redhat.com> Cc: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 09:02:48 +00:00
{
struct sigqueue *q, *n;
sigset_t m;
sigandsets(&m, mask, &s->signal);
if (sigisemptyset(&m))
signal: make flush_sigqueue_mask() void The return value of flush_sigqueue_mask() is never checked anywhere. Link: http://lkml.kernel.org/r/20180602103653.18181-14-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Morris <james.morris@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 05:00:38 +00:00
return;
[PATCH] sigaction should clear all signals on SIG_IGN, not just < 32 While rooting aroung in the signal code trying to understand how to fix the SIG_IGN ploy (set sig handler to SIG_IGN and flood system with high speed repeating timers) I came across what, I think, is a problem in sigaction() in that when processing a SIG_IGN request it flushes signals from 1 to SIGRTMIN and leaves the rest. Attempt to fix this. Signed-off-by: George Anzinger <george@mvista.com> Cc: Roland McGrath <roland@redhat.com> Cc: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 09:02:48 +00:00
signal: rename signandsets() to sigandnsets() As Tejun and Linus pointed out, "nand" is the wrong name for "x & ~y", it should be "andn". Rename signandsets() as suggested. Suggested-by: Tejun Heo <tj@kernel.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-04-27 20:01:27 +00:00
sigandnsets(&s->signal, &s->signal, mask);
[PATCH] sigaction should clear all signals on SIG_IGN, not just < 32 While rooting aroung in the signal code trying to understand how to fix the SIG_IGN ploy (set sig handler to SIG_IGN and flood system with high speed repeating timers) I came across what, I think, is a problem in sigaction() in that when processing a SIG_IGN request it flushes signals from 1 to SIGRTMIN and leaves the rest. Attempt to fix this. Signed-off-by: George Anzinger <george@mvista.com> Cc: Roland McGrath <roland@redhat.com> Cc: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 09:02:48 +00:00
list_for_each_entry_safe(q, n, &s->list, list) {
if (sigismember(mask, q->info.si_signo)) {
list_del_init(&q->list);
__sigqueue_free(q);
}
}
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
static inline int is_si_special(const struct kernel_siginfo *info)
signals: SEND_SIG_NOINFO should be considered as SI_FROMUSER() No changes in compiled code. The patch adds the new helper, si_fromuser() and changes check_kill_permission() to use this helper. The real effect of this patch is that from now we "officially" consider SEND_SIG_NOINFO signal as "from user-space" signals. This is already true if we look at the code which uses SEND_SIG_NOINFO, except __send_signal() has another opinion - see the next patch. The naming of these special SEND_SIG_XXX siginfo's is really bad imho. From __send_signal()'s pov they mean SEND_SIG_NOINFO from user SEND_SIG_PRIV from kernel SEND_SIG_FORCED no info Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com> Reviewed-by: Sukadev Bhattiprolu <sukadev@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 00:47:22 +00:00
{
signal: Remove SEND_SIG_FORCED There are no more users of SEND_SIG_FORCED so it may be safely removed. Remove the definition of SEND_SIG_FORCED, it's use in is_si_special, it's use in TP_STORE_SIGINFO, and it's use in __send_signal as without any users the uses of SEND_SIG_FORCED are now unncessary. This makes the code simpler, easier to understand and use. Users of signal sending functions now no longer need to ask themselves do I need to use SEND_SIG_FORCED. Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-03 08:39:04 +00:00
return info <= SEND_SIG_PRIV;
signals: SEND_SIG_NOINFO should be considered as SI_FROMUSER() No changes in compiled code. The patch adds the new helper, si_fromuser() and changes check_kill_permission() to use this helper. The real effect of this patch is that from now we "officially" consider SEND_SIG_NOINFO signal as "from user-space" signals. This is already true if we look at the code which uses SEND_SIG_NOINFO, except __send_signal() has another opinion - see the next patch. The naming of these special SEND_SIG_XXX siginfo's is really bad imho. From __send_signal()'s pov they mean SEND_SIG_NOINFO from user SEND_SIG_PRIV from kernel SEND_SIG_FORCED no info Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com> Reviewed-by: Sukadev Bhattiprolu <sukadev@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 00:47:22 +00:00
}
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
static inline bool si_fromuser(const struct kernel_siginfo *info)
signals: SEND_SIG_NOINFO should be considered as SI_FROMUSER() No changes in compiled code. The patch adds the new helper, si_fromuser() and changes check_kill_permission() to use this helper. The real effect of this patch is that from now we "officially" consider SEND_SIG_NOINFO signal as "from user-space" signals. This is already true if we look at the code which uses SEND_SIG_NOINFO, except __send_signal() has another opinion - see the next patch. The naming of these special SEND_SIG_XXX siginfo's is really bad imho. From __send_signal()'s pov they mean SEND_SIG_NOINFO from user SEND_SIG_PRIV from kernel SEND_SIG_FORCED no info Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com> Reviewed-by: Sukadev Bhattiprolu <sukadev@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 00:47:22 +00:00
{
return info == SEND_SIG_NOINFO ||
(!is_si_special(info) && SI_FROMUSER(info));
}
userns: allow killing tasks in your own or child userns Changelog: Dec 8: Fixed bug in my check_kill_permission pointed out by Eric Biederman. Dec 13: Apply Eric's suggestion to pass target task into kill_ok_by_cred() for clarity Dec 31: address comment by Eric Biederman: don't need cred/tcred in check_kill_permission. Jan 1: use const cred struct. Jan 11: Per Bastian Blank's advice, clean up kill_ok_by_cred(). Feb 16: kill_ok_by_cred: fix bad parentheses Feb 23: per akpm, let compiler inline kill_ok_by_cred Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Daniel Lezcano <daniel.lezcano@free.fr> Acked-by: David Howells <dhowells@redhat.com> Cc: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23 23:43:19 +00:00
/*
* called with RCU read lock from check_kill_permission()
*/
signal: make kill_ok_by_cred() return bool kill_ok_by_cred() already behaves like a boolean function. Let's actually declare it as such too. Link: http://lkml.kernel.org/r/20180602103653.18181-7-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Morris <james.morris@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 05:00:11 +00:00
static bool kill_ok_by_cred(struct task_struct *t)
userns: allow killing tasks in your own or child userns Changelog: Dec 8: Fixed bug in my check_kill_permission pointed out by Eric Biederman. Dec 13: Apply Eric's suggestion to pass target task into kill_ok_by_cred() for clarity Dec 31: address comment by Eric Biederman: don't need cred/tcred in check_kill_permission. Jan 1: use const cred struct. Jan 11: Per Bastian Blank's advice, clean up kill_ok_by_cred(). Feb 16: kill_ok_by_cred: fix bad parentheses Feb 23: per akpm, let compiler inline kill_ok_by_cred Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Daniel Lezcano <daniel.lezcano@free.fr> Acked-by: David Howells <dhowells@redhat.com> Cc: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23 23:43:19 +00:00
{
const struct cred *cred = current_cred();
const struct cred *tcred = __task_cred(t);
signal: make kill_ok_by_cred() return bool kill_ok_by_cred() already behaves like a boolean function. Let's actually declare it as such too. Link: http://lkml.kernel.org/r/20180602103653.18181-7-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Morris <james.morris@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 05:00:11 +00:00
return uid_eq(cred->euid, tcred->suid) ||
uid_eq(cred->euid, tcred->uid) ||
uid_eq(cred->uid, tcred->suid) ||
uid_eq(cred->uid, tcred->uid) ||
ns_capable(tcred->user_ns, CAP_KILL);
userns: allow killing tasks in your own or child userns Changelog: Dec 8: Fixed bug in my check_kill_permission pointed out by Eric Biederman. Dec 13: Apply Eric's suggestion to pass target task into kill_ok_by_cred() for clarity Dec 31: address comment by Eric Biederman: don't need cred/tcred in check_kill_permission. Jan 1: use const cred struct. Jan 11: Per Bastian Blank's advice, clean up kill_ok_by_cred(). Feb 16: kill_ok_by_cred: fix bad parentheses Feb 23: per akpm, let compiler inline kill_ok_by_cred Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Daniel Lezcano <daniel.lezcano@free.fr> Acked-by: David Howells <dhowells@redhat.com> Cc: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23 23:43:19 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* Bad permissions for sending the signal
CRED: Fix RCU warning due to previous patch fixing __task_cred()'s checks Commit 8f92054e7ca1 ("CRED: Fix __task_cred()'s lockdep check and banner comment") fixed the lockdep checks on __task_cred(). This has shown up a place in the signalling code where a lock should be held - namely that check_kill_permission() requires its callers to hold the RCU lock. Fix group_send_sig_info() to get the RCU read lock around its call to check_kill_permission(). Without this patch, the following warning can occur: =================================================== [ INFO: suspicious rcu_dereference_check() usage. ] --------------------------------------------------- kernel/signal.c:660 invoked rcu_dereference_check() without protection! ... Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-04 15:59:14 +00:00
* - the caller must hold the RCU read lock
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
static int check_kill_permission(int sig, struct kernel_siginfo *info,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct task_struct *t)
{
signals: check_kill_permission: check session under tasklist_lock This wasn't documented, but as Atsushi Tsuji pointed out check_kill_permission() needs tasklist_lock for task_session_nr(). I missed this fact when removed tasklist from the callers. Change check_kill_permission() to take tasklist_lock for the SIGCONT case. Re-order security checks so that we take tasklist_lock only if/when it is actually needed. This is a minimal fix for now, tasklist will be removed later. Also change the code to use task_session() instead of task_session_nr(). Also, remove the SIGCONT check from cap_task_kill(), it is bogus (and the whole function is bogus. Serge, Eric, why it is still alive?). Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: Atsushi Tsuji <a-tsuji@bk.jp.nec.com> Cc: Roland McGrath <roland@redhat.com> Cc: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:53:01 +00:00
struct pid *sid;
signals: cleanup security_task_kill() usage/implementation Every implementation of ->task_kill() does nothing when the signal comes from the kernel. This is correct, but means that check_kill_permission() should call security_task_kill() only for SI_FROMUSER() case, and we can remove the same check from ->task_kill() implementations. (sadly, check_kill_permission() is the last user of signal->session/__session but we can't s/task_session_nr/task_session/ here). NOTE: Eric W. Biederman pointed out cap_task_kill() should die, and I think he is very right. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Roland McGrath <roland@redhat.com> Cc: Casey Schaufler <casey@schaufler-ca.com> Cc: David Quigley <dpquigl@tycho.nsa.gov> Cc: Eric Paris <eparis@redhat.com> Cc: Harald Welte <laforge@gnumonks.org> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:42 +00:00
int error;
[PATCH] convert that currently tests _NSIG directly to use valid_signal() Convert most of the current code that uses _NSIG directly to instead use valid_signal(). This avoids gcc -W warnings and off-by-one errors. Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 15:59:14 +00:00
if (!valid_signal(sig))
signals: cleanup security_task_kill() usage/implementation Every implementation of ->task_kill() does nothing when the signal comes from the kernel. This is correct, but means that check_kill_permission() should call security_task_kill() only for SI_FROMUSER() case, and we can remove the same check from ->task_kill() implementations. (sadly, check_kill_permission() is the last user of signal->session/__session but we can't s/task_session_nr/task_session/ here). NOTE: Eric W. Biederman pointed out cap_task_kill() should die, and I think he is very right. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Roland McGrath <roland@redhat.com> Cc: Casey Schaufler <casey@schaufler-ca.com> Cc: David Quigley <dpquigl@tycho.nsa.gov> Cc: Eric Paris <eparis@redhat.com> Cc: Harald Welte <laforge@gnumonks.org> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:42 +00:00
return -EINVAL;
signals: SEND_SIG_NOINFO should be considered as SI_FROMUSER() No changes in compiled code. The patch adds the new helper, si_fromuser() and changes check_kill_permission() to use this helper. The real effect of this patch is that from now we "officially" consider SEND_SIG_NOINFO signal as "from user-space" signals. This is already true if we look at the code which uses SEND_SIG_NOINFO, except __send_signal() has another opinion - see the next patch. The naming of these special SEND_SIG_XXX siginfo's is really bad imho. From __send_signal()'s pov they mean SEND_SIG_NOINFO from user SEND_SIG_PRIV from kernel SEND_SIG_FORCED no info Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com> Reviewed-by: Sukadev Bhattiprolu <sukadev@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 00:47:22 +00:00
if (!si_fromuser(info))
signals: cleanup security_task_kill() usage/implementation Every implementation of ->task_kill() does nothing when the signal comes from the kernel. This is correct, but means that check_kill_permission() should call security_task_kill() only for SI_FROMUSER() case, and we can remove the same check from ->task_kill() implementations. (sadly, check_kill_permission() is the last user of signal->session/__session but we can't s/task_session_nr/task_session/ here). NOTE: Eric W. Biederman pointed out cap_task_kill() should die, and I think he is very right. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Roland McGrath <roland@redhat.com> Cc: Casey Schaufler <casey@schaufler-ca.com> Cc: David Quigley <dpquigl@tycho.nsa.gov> Cc: Eric Paris <eparis@redhat.com> Cc: Harald Welte <laforge@gnumonks.org> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:42 +00:00
return 0;
[PATCH] audit signal recipients When auditing syscalls that send signals, log the pid and security context for each target process. Optimize the data collection by adding a counter for signal-related rules, and avoiding allocating an aux struct unless we have more than one target process. For process groups, collect pid/context data in blocks of 16. Move the audit_signal_info() hook up in check_kill_permission() so we audit attempts where permission is denied. Signed-off-by: Amy Griffis <amy.griffis@hp.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2007-03-29 22:01:04 +00:00
signals: cleanup security_task_kill() usage/implementation Every implementation of ->task_kill() does nothing when the signal comes from the kernel. This is correct, but means that check_kill_permission() should call security_task_kill() only for SI_FROMUSER() case, and we can remove the same check from ->task_kill() implementations. (sadly, check_kill_permission() is the last user of signal->session/__session but we can't s/task_session_nr/task_session/ here). NOTE: Eric W. Biederman pointed out cap_task_kill() should die, and I think he is very right. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Roland McGrath <roland@redhat.com> Cc: Casey Schaufler <casey@schaufler-ca.com> Cc: David Quigley <dpquigl@tycho.nsa.gov> Cc: Eric Paris <eparis@redhat.com> Cc: Harald Welte <laforge@gnumonks.org> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:42 +00:00
error = audit_signal_info(sig, t); /* Let audit system see the signal */
if (error)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return error;
signals: cleanup security_task_kill() usage/implementation Every implementation of ->task_kill() does nothing when the signal comes from the kernel. This is correct, but means that check_kill_permission() should call security_task_kill() only for SI_FROMUSER() case, and we can remove the same check from ->task_kill() implementations. (sadly, check_kill_permission() is the last user of signal->session/__session but we can't s/task_session_nr/task_session/ here). NOTE: Eric W. Biederman pointed out cap_task_kill() should die, and I think he is very right. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Roland McGrath <roland@redhat.com> Cc: Casey Schaufler <casey@schaufler-ca.com> Cc: David Quigley <dpquigl@tycho.nsa.gov> Cc: Eric Paris <eparis@redhat.com> Cc: Harald Welte <laforge@gnumonks.org> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:42 +00:00
signals: check_kill_permission(): don't check creds if same_thread_group() Andrew Tridgell reports that aio_read(SIGEV_SIGNAL) can fail if the notification from the helper thread races with setresuid(), see http://samba.org/~tridge/junkcode/aio_uid.c This happens because check_kill_permission() doesn't permit sending a signal to the task with the different cred->xids. But there is not any security reason to check ->cred's when the task sends a signal (private or group-wide) to its sub-thread. Whatever we do, any thread can bypass all security checks and send SIGKILL to all threads, or it can block a signal SIG and do kill(gettid(), SIG) to deliver this signal to another sub-thread. Not to mention that CLONE_THREAD implies CLONE_VM. Change check_kill_permission() to avoid the credentials check when the sender and the target are from the same thread group. Also, move "cred = current_cred()" down to avoid calling get_current() twice. Note: David Howells pointed out we could relax this even more, the CLONE_SIGHAND (without CLONE_THREAD) case probably does not need these checks too. Roland said: : The glibc (libpthread) that does set*id across threads has : been in use for a while (2.3.4?), probably in distro's using kernels as old : or older than any active -stable streams. In the race in question, this : kernel bug is breaking valid POSIX application expectations. Reported-by: Andrew Tridgell <tridge@samba.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Roland McGrath <roland@redhat.com> Acked-by: David Howells <dhowells@redhat.com> Cc: Eric Paris <eparis@parisplace.org> Cc: Jakub Jelinek <jakub@redhat.com> Cc: James Morris <jmorris@namei.org> Cc: Roland McGrath <roland@redhat.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: <stable@kernel.org> [all kernel versions] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-26 21:42:54 +00:00
if (!same_thread_group(current, t) &&
userns: allow killing tasks in your own or child userns Changelog: Dec 8: Fixed bug in my check_kill_permission pointed out by Eric Biederman. Dec 13: Apply Eric's suggestion to pass target task into kill_ok_by_cred() for clarity Dec 31: address comment by Eric Biederman: don't need cred/tcred in check_kill_permission. Jan 1: use const cred struct. Jan 11: Per Bastian Blank's advice, clean up kill_ok_by_cred(). Feb 16: kill_ok_by_cred: fix bad parentheses Feb 23: per akpm, let compiler inline kill_ok_by_cred Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Daniel Lezcano <daniel.lezcano@free.fr> Acked-by: David Howells <dhowells@redhat.com> Cc: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23 23:43:19 +00:00
!kill_ok_by_cred(t)) {
signals: check_kill_permission: check session under tasklist_lock This wasn't documented, but as Atsushi Tsuji pointed out check_kill_permission() needs tasklist_lock for task_session_nr(). I missed this fact when removed tasklist from the callers. Change check_kill_permission() to take tasklist_lock for the SIGCONT case. Re-order security checks so that we take tasklist_lock only if/when it is actually needed. This is a minimal fix for now, tasklist will be removed later. Also change the code to use task_session() instead of task_session_nr(). Also, remove the SIGCONT check from cap_task_kill(), it is bogus (and the whole function is bogus. Serge, Eric, why it is still alive?). Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: Atsushi Tsuji <a-tsuji@bk.jp.nec.com> Cc: Roland McGrath <roland@redhat.com> Cc: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:53:01 +00:00
switch (sig) {
case SIGCONT:
sid = task_session(t);
/*
* We don't return the error if sid == NULL. The
* task was unhashed, the caller must notice this.
*/
if (!sid || sid == task_session(current))
break;
kernel/signal.c: annotate implicit fall through There is a plan to build the kernel with -Wimplicit-fallthrough and this place in the code produced a warning (W=1). This commit remove the following warning: kernel/signal.c:795:13: warning: this statement may fall through [-Wimplicit-fallthrough=] Link: http://lkml.kernel.org/r/20190114203505.17875-1-malat@debian.org Signed-off-by: Mathieu Malaterre <malat@debian.org> Acked-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 22:44:35 +00:00
/* fall through */
signals: check_kill_permission: check session under tasklist_lock This wasn't documented, but as Atsushi Tsuji pointed out check_kill_permission() needs tasklist_lock for task_session_nr(). I missed this fact when removed tasklist from the callers. Change check_kill_permission() to take tasklist_lock for the SIGCONT case. Re-order security checks so that we take tasklist_lock only if/when it is actually needed. This is a minimal fix for now, tasklist will be removed later. Also change the code to use task_session() instead of task_session_nr(). Also, remove the SIGCONT check from cap_task_kill(), it is bogus (and the whole function is bogus. Serge, Eric, why it is still alive?). Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: Atsushi Tsuji <a-tsuji@bk.jp.nec.com> Cc: Roland McGrath <roland@redhat.com> Cc: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:53:01 +00:00
default:
return -EPERM;
}
}
The attached patch addresses the problem with getting the audit daemon shutdown credential information. It creates a new message type AUDIT_TERM_INFO, which is used by the audit daemon to query who issued the shutdown. It requires the placement of a hook function that gathers the information. The hook is after the DAC & MAC checks and before the function returns. Racing threads could overwrite the uid & pid - but they would have to be root and have policy that allows signalling the audit daemon. That should be a manageable risk. The userspace component will be released later in audit 0.7.2. When it receives the TERM signal, it queries the kernel for shutdown information. When it receives it, it writes the message and exits. The message looks like this: type=DAEMON msg=auditd(1114551182.000) auditd normal halt, sending pid=2650 uid=525, auditd pid=1685 Signed-off-by: Steve Grubb <sgrubb@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-06 11:38:39 +00:00
usb, signal, security: only pass the cred, not the secid, to kill_pid_info_as_cred and security_task_kill commit d178bc3a708f39cbfefc3fab37032d3f2511b4ec ("user namespace: usb: make usb urbs user namespace aware (v2)") changed kill_pid_info_as_uid to kill_pid_info_as_cred, saving and passing a cred structure instead of uids. Since the secid can be obtained from the cred, drop the secid fields from the usb_dev_state and async structures, and drop the secid argument to kill_pid_info_as_cred. Replace the secid argument to security_task_kill with the cred. Update SELinux, Smack, and AppArmor to use the cred, which avoids the need for Smack and AppArmor to use a secid at all in this hook. Further changes to Smack might still be required to take full advantage of this change, since it should now be possible to perform capability checking based on the supplied cred. The changes to Smack and AppArmor have only been compile-tested. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Acked-by: Paul Moore <paul@paul-moore.com> Acked-by: Casey Schaufler <casey@schaufler-ca.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: John Johansen <john.johansen@canonical.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2017-09-08 16:40:01 +00:00
return security_task_kill(t, info, sig, NULL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
ptrace: implement TRAP_NOTIFY and use it for group stop events Currently there's no way for ptracer to find out whether group stop finished other than polling with INTERRUPT - GETSIGINFO - CONT sequence. This patch implements group stop notification for ptracer using STOP traps. When group stop state of a seized tracee changes, JOBCTL_TRAP_NOTIFY is set, which schedules a STOP trap which is sticky - it isn't cleared by other traps and at least one STOP trap will happen eventually. STOP trap is synchronization point for event notification and the tracer can determine the current group stop state by looking at the signal number portion of exit code (si_status from waitid(2) or si_code from PTRACE_GETSIGINFO). Notifications are generated both on start and end of group stops but, because group stop participation always happens before STOP trap, this doesn't cause an extra trap while tracee is participating in group stop. The symmetry will be useful later. Note that this notification works iff tracee is not trapped. Currently there is no way to be notified of group stop state changes while tracee is trapped. This will be addressed by a later patch. An example program follows. #define PTRACE_SEIZE 0x4206 #define PTRACE_INTERRUPT 0x4207 #define PTRACE_SEIZE_DEVEL 0x80000000 static const struct timespec ts1s = { .tv_sec = 1 }; int main(int argc, char **argv) { pid_t tracee, tracer; int i; tracee = fork(); if (!tracee) while (1) pause(); tracer = fork(); if (!tracer) { siginfo_t si; ptrace(PTRACE_SEIZE, tracee, NULL, (void *)(unsigned long)PTRACE_SEIZE_DEVEL); ptrace(PTRACE_INTERRUPT, tracee, NULL, NULL); repeat: waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_GETSIGINFO, tracee, NULL, &si); if (!si.si_code) { printf("tracer: SIG %d\n", si.si_signo); ptrace(PTRACE_CONT, tracee, NULL, (void *)(unsigned long)si.si_signo); goto repeat; } printf("tracer: stopped=%d signo=%d\n", si.si_signo != SIGTRAP, si.si_signo); ptrace(PTRACE_CONT, tracee, NULL, NULL); goto repeat; } for (i = 0; i < 3; i++) { nanosleep(&ts1s, NULL); printf("mother: SIGSTOP\n"); kill(tracee, SIGSTOP); nanosleep(&ts1s, NULL); printf("mother: SIGCONT\n"); kill(tracee, SIGCONT); } nanosleep(&ts1s, NULL); kill(tracer, SIGKILL); kill(tracee, SIGKILL); return 0; } In the above program, tracer keeps tracee running and gets notification of each group stop state changes. # ./test-notify tracer: stopped=0 signo=5 mother: SIGSTOP tracer: SIG 19 tracer: stopped=1 signo=19 mother: SIGCONT tracer: stopped=0 signo=5 tracer: SIG 18 mother: SIGSTOP tracer: SIG 19 tracer: stopped=1 signo=19 mother: SIGCONT tracer: stopped=0 signo=5 tracer: SIG 18 mother: SIGSTOP tracer: SIG 19 tracer: stopped=1 signo=19 mother: SIGCONT tracer: stopped=0 signo=5 tracer: SIG 18 Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 09:20:17 +00:00
/**
* ptrace_trap_notify - schedule trap to notify ptracer
* @t: tracee wanting to notify tracer
*
* This function schedules sticky ptrace trap which is cleared on the next
* TRAP_STOP to notify ptracer of an event. @t must have been seized by
* ptracer.
*
ptrace: implement PTRACE_LISTEN The previous patch implemented async notification for ptrace but it only worked while trace is running. This patch introduces PTRACE_LISTEN which is suggested by Oleg Nestrov. It's allowed iff tracee is in STOP trap and puts tracee into quasi-running state - tracee never really runs but wait(2) and ptrace(2) consider it to be running. While ptracer is listening, tracee is allowed to re-enter STOP to notify an async event. Listening state is cleared on the first notification. Ptracer can also clear it by issuing INTERRUPT - tracee will re-trap into STOP with listening state cleared. This allows ptracer to monitor group stop state without running tracee - use INTERRUPT to put tracee into STOP trap, issue LISTEN and then wait(2) to wait for the next group stop event. When it happens, PTRACE_GETSIGINFO provides information to determine the current state. Test program follows. #define PTRACE_SEIZE 0x4206 #define PTRACE_INTERRUPT 0x4207 #define PTRACE_LISTEN 0x4208 #define PTRACE_SEIZE_DEVEL 0x80000000 static const struct timespec ts1s = { .tv_sec = 1 }; int main(int argc, char **argv) { pid_t tracee, tracer; int i; tracee = fork(); if (!tracee) while (1) pause(); tracer = fork(); if (!tracer) { siginfo_t si; ptrace(PTRACE_SEIZE, tracee, NULL, (void *)(unsigned long)PTRACE_SEIZE_DEVEL); ptrace(PTRACE_INTERRUPT, tracee, NULL, NULL); repeat: waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_GETSIGINFO, tracee, NULL, &si); if (!si.si_code) { printf("tracer: SIG %d\n", si.si_signo); ptrace(PTRACE_CONT, tracee, NULL, (void *)(unsigned long)si.si_signo); goto repeat; } printf("tracer: stopped=%d signo=%d\n", si.si_signo != SIGTRAP, si.si_signo); if (si.si_signo != SIGTRAP) ptrace(PTRACE_LISTEN, tracee, NULL, NULL); else ptrace(PTRACE_CONT, tracee, NULL, NULL); goto repeat; } for (i = 0; i < 3; i++) { nanosleep(&ts1s, NULL); printf("mother: SIGSTOP\n"); kill(tracee, SIGSTOP); nanosleep(&ts1s, NULL); printf("mother: SIGCONT\n"); kill(tracee, SIGCONT); } nanosleep(&ts1s, NULL); kill(tracer, SIGKILL); kill(tracee, SIGKILL); return 0; } This is identical to the program to test TRAP_NOTIFY except that tracee is PTRACE_LISTEN'd instead of PTRACE_CONT'd when group stopped. This allows ptracer to monitor when group stop ends without running tracee. # ./test-listen tracer: stopped=0 signo=5 mother: SIGSTOP tracer: SIG 19 tracer: stopped=1 signo=19 mother: SIGCONT tracer: stopped=0 signo=5 tracer: SIG 18 mother: SIGSTOP tracer: SIG 19 tracer: stopped=1 signo=19 mother: SIGCONT tracer: stopped=0 signo=5 tracer: SIG 18 mother: SIGSTOP tracer: SIG 19 tracer: stopped=1 signo=19 mother: SIGCONT tracer: stopped=0 signo=5 tracer: SIG 18 -v2: Moved JOBCTL_LISTENING check in wait_task_stopped() into task_stopped_code() as suggested by Oleg. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 09:20:18 +00:00
* If @t is running, STOP trap will be taken. If trapped for STOP and
* ptracer is listening for events, tracee is woken up so that it can
* re-trap for the new event. If trapped otherwise, STOP trap will be
* eventually taken without returning to userland after the existing traps
* are finished by PTRACE_CONT.
ptrace: implement TRAP_NOTIFY and use it for group stop events Currently there's no way for ptracer to find out whether group stop finished other than polling with INTERRUPT - GETSIGINFO - CONT sequence. This patch implements group stop notification for ptracer using STOP traps. When group stop state of a seized tracee changes, JOBCTL_TRAP_NOTIFY is set, which schedules a STOP trap which is sticky - it isn't cleared by other traps and at least one STOP trap will happen eventually. STOP trap is synchronization point for event notification and the tracer can determine the current group stop state by looking at the signal number portion of exit code (si_status from waitid(2) or si_code from PTRACE_GETSIGINFO). Notifications are generated both on start and end of group stops but, because group stop participation always happens before STOP trap, this doesn't cause an extra trap while tracee is participating in group stop. The symmetry will be useful later. Note that this notification works iff tracee is not trapped. Currently there is no way to be notified of group stop state changes while tracee is trapped. This will be addressed by a later patch. An example program follows. #define PTRACE_SEIZE 0x4206 #define PTRACE_INTERRUPT 0x4207 #define PTRACE_SEIZE_DEVEL 0x80000000 static const struct timespec ts1s = { .tv_sec = 1 }; int main(int argc, char **argv) { pid_t tracee, tracer; int i; tracee = fork(); if (!tracee) while (1) pause(); tracer = fork(); if (!tracer) { siginfo_t si; ptrace(PTRACE_SEIZE, tracee, NULL, (void *)(unsigned long)PTRACE_SEIZE_DEVEL); ptrace(PTRACE_INTERRUPT, tracee, NULL, NULL); repeat: waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_GETSIGINFO, tracee, NULL, &si); if (!si.si_code) { printf("tracer: SIG %d\n", si.si_signo); ptrace(PTRACE_CONT, tracee, NULL, (void *)(unsigned long)si.si_signo); goto repeat; } printf("tracer: stopped=%d signo=%d\n", si.si_signo != SIGTRAP, si.si_signo); ptrace(PTRACE_CONT, tracee, NULL, NULL); goto repeat; } for (i = 0; i < 3; i++) { nanosleep(&ts1s, NULL); printf("mother: SIGSTOP\n"); kill(tracee, SIGSTOP); nanosleep(&ts1s, NULL); printf("mother: SIGCONT\n"); kill(tracee, SIGCONT); } nanosleep(&ts1s, NULL); kill(tracer, SIGKILL); kill(tracee, SIGKILL); return 0; } In the above program, tracer keeps tracee running and gets notification of each group stop state changes. # ./test-notify tracer: stopped=0 signo=5 mother: SIGSTOP tracer: SIG 19 tracer: stopped=1 signo=19 mother: SIGCONT tracer: stopped=0 signo=5 tracer: SIG 18 mother: SIGSTOP tracer: SIG 19 tracer: stopped=1 signo=19 mother: SIGCONT tracer: stopped=0 signo=5 tracer: SIG 18 mother: SIGSTOP tracer: SIG 19 tracer: stopped=1 signo=19 mother: SIGCONT tracer: stopped=0 signo=5 tracer: SIG 18 Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 09:20:17 +00:00
*
* CONTEXT:
* Must be called with @task->sighand->siglock held.
*/
static void ptrace_trap_notify(struct task_struct *t)
{
WARN_ON_ONCE(!(t->ptrace & PT_SEIZED));
assert_spin_locked(&t->sighand->siglock);
task_set_jobctl_pending(t, JOBCTL_TRAP_NOTIFY);
ptrace: introduce signal_wake_up_state() and ptrace_signal_wake_up() Cleanup and preparation for the next change. signal_wake_up(resume => true) is overused. None of ptrace/jctl callers actually want to wakeup a TASK_WAKEKILL task, but they can't specify the necessary mask. Turn signal_wake_up() into signal_wake_up_state(state), reintroduce signal_wake_up() as a trivial helper, and add ptrace_signal_wake_up() which adds __TASK_TRACED. This way ptrace_signal_wake_up() can work "inside" ptrace_request() even if the tracee doesn't have the TASK_WAKEKILL bit set. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-21 19:47:41 +00:00
ptrace_signal_wake_up(t, t->jobctl & JOBCTL_LISTENING);
ptrace: implement TRAP_NOTIFY and use it for group stop events Currently there's no way for ptracer to find out whether group stop finished other than polling with INTERRUPT - GETSIGINFO - CONT sequence. This patch implements group stop notification for ptracer using STOP traps. When group stop state of a seized tracee changes, JOBCTL_TRAP_NOTIFY is set, which schedules a STOP trap which is sticky - it isn't cleared by other traps and at least one STOP trap will happen eventually. STOP trap is synchronization point for event notification and the tracer can determine the current group stop state by looking at the signal number portion of exit code (si_status from waitid(2) or si_code from PTRACE_GETSIGINFO). Notifications are generated both on start and end of group stops but, because group stop participation always happens before STOP trap, this doesn't cause an extra trap while tracee is participating in group stop. The symmetry will be useful later. Note that this notification works iff tracee is not trapped. Currently there is no way to be notified of group stop state changes while tracee is trapped. This will be addressed by a later patch. An example program follows. #define PTRACE_SEIZE 0x4206 #define PTRACE_INTERRUPT 0x4207 #define PTRACE_SEIZE_DEVEL 0x80000000 static const struct timespec ts1s = { .tv_sec = 1 }; int main(int argc, char **argv) { pid_t tracee, tracer; int i; tracee = fork(); if (!tracee) while (1) pause(); tracer = fork(); if (!tracer) { siginfo_t si; ptrace(PTRACE_SEIZE, tracee, NULL, (void *)(unsigned long)PTRACE_SEIZE_DEVEL); ptrace(PTRACE_INTERRUPT, tracee, NULL, NULL); repeat: waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_GETSIGINFO, tracee, NULL, &si); if (!si.si_code) { printf("tracer: SIG %d\n", si.si_signo); ptrace(PTRACE_CONT, tracee, NULL, (void *)(unsigned long)si.si_signo); goto repeat; } printf("tracer: stopped=%d signo=%d\n", si.si_signo != SIGTRAP, si.si_signo); ptrace(PTRACE_CONT, tracee, NULL, NULL); goto repeat; } for (i = 0; i < 3; i++) { nanosleep(&ts1s, NULL); printf("mother: SIGSTOP\n"); kill(tracee, SIGSTOP); nanosleep(&ts1s, NULL); printf("mother: SIGCONT\n"); kill(tracee, SIGCONT); } nanosleep(&ts1s, NULL); kill(tracer, SIGKILL); kill(tracee, SIGKILL); return 0; } In the above program, tracer keeps tracee running and gets notification of each group stop state changes. # ./test-notify tracer: stopped=0 signo=5 mother: SIGSTOP tracer: SIG 19 tracer: stopped=1 signo=19 mother: SIGCONT tracer: stopped=0 signo=5 tracer: SIG 18 mother: SIGSTOP tracer: SIG 19 tracer: stopped=1 signo=19 mother: SIGCONT tracer: stopped=0 signo=5 tracer: SIG 18 mother: SIGSTOP tracer: SIG 19 tracer: stopped=1 signo=19 mother: SIGCONT tracer: stopped=0 signo=5 tracer: SIG 18 Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 09:20:17 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
signals: fold sig_ignored() into handle_stop_signal() Rename handle_stop_signal() to prepare_signal(), make it return a boolean, and move the callsites of sig_ignored() into it. No functional changes for now. But it would be nice to factor out the "should we drop this signal" checks as much as possible, before we try to fix the bugs with the sub-namespace init's signals (actually the global /sbin/init has some problems with signals too). Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:59 +00:00
* Handle magic process-wide effects of stop/continue signals. Unlike
* the signal actions, these happen immediately at signal-generation
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
* time regardless of blocking, ignoring, or handling. This does the
* actual continuing for SIGCONT, but not the actual stopping for stop
signals: fold sig_ignored() into handle_stop_signal() Rename handle_stop_signal() to prepare_signal(), make it return a boolean, and move the callsites of sig_ignored() into it. No functional changes for now. But it would be nice to factor out the "should we drop this signal" checks as much as possible, before we try to fix the bugs with the sub-namespace init's signals (actually the global /sbin/init has some problems with signals too). Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:59 +00:00
* signals. The process stop is done as a signal action for SIG_DFL.
*
* Returns true if the signal should be actually delivered, otherwise
* it should be dropped.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
coredump: only SIGKILL should interrupt the coredumping task There are 2 well known and ancient problems with coredump/signals, and a lot of related bug reports: - do_coredump() clears TIF_SIGPENDING but of course this can't help if, say, SIGCHLD comes after that. In this case the coredump can fail unexpectedly. See for example wait_for_dump_helper()->signal_pending() check but there are other reasons. - At the same time, dumping a huge core on the slow media can take a lot of time/resources and there is no way to kill the coredumping task reliably. In particular this is not oom_kill-friendly. This patch tries to fix the 1st problem, and makes the preparation for the next changes. We add the new SIGNAL_GROUP_COREDUMP flag set by zap_threads() to indicate that this process dumps the core. prepare_signal() checks this flag and nacks any signal except SIGKILL. Note that this check tries to be conservative, in the long term we should probably treat the SIGNAL_GROUP_EXIT case equally but this needs more discussion. See marc.info/?l=linux-kernel&m=120508897917439 Notes: - recalc_sigpending() doesn't check SIGNAL_GROUP_COREDUMP. The patch assumes that dump_write/etc paths should never call it, but we can change it as well. - There is another source of TIF_SIGPENDING, freezer. This will be addressed separately. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Tested-by: Mandeep Singh Baines <msb@chromium.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Neil Horman <nhorman@redhat.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Roland McGrath <roland@hack.frob.com> Cc: Tejun Heo <tj@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 22:28:10 +00:00
static bool prepare_signal(int sig, struct task_struct *p, bool force)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
handle_stop_signal: use the cached p->signal value Cache the value of p->signal, and change the code to use while_each_thread() helper. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:46 +00:00
struct signal_struct *signal = p->signal;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct task_struct *t;
signals: kill rm_from_queue(), change prepare_signal() to use for_each_thread() rm_from_queue() doesn't make sense. The only caller, prepare_signal(), can use rm_from_queue_full() with the same effect. While at it, change prepare_signal() to use for_each_thread() instead of do/while_each_thread. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Richard Weinberger <richard@nod.at> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 21:36:48 +00:00
sigset_t flush;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
coredump: only SIGKILL should interrupt the coredumping task There are 2 well known and ancient problems with coredump/signals, and a lot of related bug reports: - do_coredump() clears TIF_SIGPENDING but of course this can't help if, say, SIGCHLD comes after that. In this case the coredump can fail unexpectedly. See for example wait_for_dump_helper()->signal_pending() check but there are other reasons. - At the same time, dumping a huge core on the slow media can take a lot of time/resources and there is no way to kill the coredumping task reliably. In particular this is not oom_kill-friendly. This patch tries to fix the 1st problem, and makes the preparation for the next changes. We add the new SIGNAL_GROUP_COREDUMP flag set by zap_threads() to indicate that this process dumps the core. prepare_signal() checks this flag and nacks any signal except SIGKILL. Note that this check tries to be conservative, in the long term we should probably treat the SIGNAL_GROUP_EXIT case equally but this needs more discussion. See marc.info/?l=linux-kernel&m=120508897917439 Notes: - recalc_sigpending() doesn't check SIGNAL_GROUP_COREDUMP. The patch assumes that dump_write/etc paths should never call it, but we can change it as well. - There is another source of TIF_SIGPENDING, freezer. This will be addressed separately. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Tested-by: Mandeep Singh Baines <msb@chromium.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Neil Horman <nhorman@redhat.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Roland McGrath <roland@hack.frob.com> Cc: Tejun Heo <tj@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 22:28:10 +00:00
if (signal->flags & (SIGNAL_GROUP_EXIT | SIGNAL_GROUP_COREDUMP)) {
coredump: ensure all coredumping tasks have SIGNAL_GROUP_COREDUMP task_will_free_mem() is wrong in many ways, and in particular the SIGNAL_GROUP_COREDUMP check is not reliable: a task can participate in the coredumping without SIGNAL_GROUP_COREDUMP bit set. change zap_threads() paths to always set SIGNAL_GROUP_COREDUMP even if other CLONE_VM processes can't react to SIGKILL. Fortunately, at least oom-kill case if fine; it kills all tasks sharing the same mm, so it should also kill the process which actually dumps the core. The change in prepare_signal() is not strictly necessary, it just ensures that the patch does not bring another subtle behavioural change. But it reminds us that this SIGNAL_GROUP_EXIT/COREDUMP case needs more changes. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Kyle Walker <kwalker@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Stanislav Kozina <skozina@redhat.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-07 00:32:31 +00:00
if (!(signal->flags & SIGNAL_GROUP_EXIT))
coredump: only SIGKILL should interrupt the coredumping task There are 2 well known and ancient problems with coredump/signals, and a lot of related bug reports: - do_coredump() clears TIF_SIGPENDING but of course this can't help if, say, SIGCHLD comes after that. In this case the coredump can fail unexpectedly. See for example wait_for_dump_helper()->signal_pending() check but there are other reasons. - At the same time, dumping a huge core on the slow media can take a lot of time/resources and there is no way to kill the coredumping task reliably. In particular this is not oom_kill-friendly. This patch tries to fix the 1st problem, and makes the preparation for the next changes. We add the new SIGNAL_GROUP_COREDUMP flag set by zap_threads() to indicate that this process dumps the core. prepare_signal() checks this flag and nacks any signal except SIGKILL. Note that this check tries to be conservative, in the long term we should probably treat the SIGNAL_GROUP_EXIT case equally but this needs more discussion. See marc.info/?l=linux-kernel&m=120508897917439 Notes: - recalc_sigpending() doesn't check SIGNAL_GROUP_COREDUMP. The patch assumes that dump_write/etc paths should never call it, but we can change it as well. - There is another source of TIF_SIGPENDING, freezer. This will be addressed separately. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Tested-by: Mandeep Singh Baines <msb@chromium.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Neil Horman <nhorman@redhat.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Roland McGrath <roland@hack.frob.com> Cc: Tejun Heo <tj@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 22:28:10 +00:00
return sig == SIGKILL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
signals: fold sig_ignored() into handle_stop_signal() Rename handle_stop_signal() to prepare_signal(), make it return a boolean, and move the callsites of sig_ignored() into it. No functional changes for now. But it would be nice to factor out the "should we drop this signal" checks as much as possible, before we try to fix the bugs with the sub-namespace init's signals (actually the global /sbin/init has some problems with signals too). Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:59 +00:00
* The process is in the middle of dying, nothing to do.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
signals: fold sig_ignored() into handle_stop_signal() Rename handle_stop_signal() to prepare_signal(), make it return a boolean, and move the callsites of sig_ignored() into it. No functional changes for now. But it would be nice to factor out the "should we drop this signal" checks as much as possible, before we try to fix the bugs with the sub-namespace init's signals (actually the global /sbin/init has some problems with signals too). Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:59 +00:00
} else if (sig_kernel_stop(sig)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* This is a stop signal. Remove SIGCONT from all queues.
*/
signals: kill rm_from_queue(), change prepare_signal() to use for_each_thread() rm_from_queue() doesn't make sense. The only caller, prepare_signal(), can use rm_from_queue_full() with the same effect. While at it, change prepare_signal() to use for_each_thread() instead of do/while_each_thread. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Richard Weinberger <richard@nod.at> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 21:36:48 +00:00
siginitset(&flush, sigmask(SIGCONT));
signals: rename rm_from_queue_full() to flush_sigqueue_mask() "rm_from_queue_full" looks ugly and misleading, especially now that rm_from_queue() has gone away. Rename it to flush_sigqueue_mask(), this matches flush_sigqueue() we already have. Also remove the obsolete comment which explains the difference with rm_from_queue() we already killed. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Richard Weinberger <richard@nod.at> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 21:36:50 +00:00
flush_sigqueue_mask(&flush, &signal->shared_pending);
signals: kill rm_from_queue(), change prepare_signal() to use for_each_thread() rm_from_queue() doesn't make sense. The only caller, prepare_signal(), can use rm_from_queue_full() with the same effect. While at it, change prepare_signal() to use for_each_thread() instead of do/while_each_thread. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Richard Weinberger <richard@nod.at> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 21:36:48 +00:00
for_each_thread(p, t)
signals: rename rm_from_queue_full() to flush_sigqueue_mask() "rm_from_queue_full" looks ugly and misleading, especially now that rm_from_queue() has gone away. Rename it to flush_sigqueue_mask(), this matches flush_sigqueue() we already have. Also remove the obsolete comment which explains the difference with rm_from_queue() we already killed. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Richard Weinberger <richard@nod.at> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 21:36:50 +00:00
flush_sigqueue_mask(&flush, &t->pending);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
} else if (sig == SIGCONT) {
handle_stop_signal: unify partial/full stop handling Now that handle_stop_signal() doesn't drop ->siglock, we can't see both ->group_stop_count && SIGNAL_STOP_STOPPED. Merge two "if" branches. As Roland pointed out, we never actually needed 2 do_notify_parent_cldstop() calls. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:46 +00:00
unsigned int why;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
signal: prepare_signal(SIGCONT) shouldn't play with TIF_SIGPENDING prepare_signal(SIGCONT) should never set TIF_SIGPENDING or wake up the TASK_INTERRUPTIBLE threads. We are going to call complete_signal() which should pick the right thread correctly. All we need is to wake up the TASK_STOPPED threads. If the task was stopped, it can't return to usermode without taking ->siglock. Otherwise we don't care, and the spurious TIF_SIGPENDING can't be useful. The comment says: * If there is a handler for SIGCONT, we must make * sure that no thread returns to user mode before * we post the signal It is not clear what this means. Probably, "when there's only a single thread" and this continues to be true. Otherwise, even if this SIGCONT is not private, with or without this change only one thread can dequeue SIGCONT, other threads can happily return to user mode before before that thread handles this signal. Note also that wake_up_state(t, __TASK_STOPPED) can't race with the task which changes its state, TASK_STOPPED state is protected by ->siglock as well. In short: when it comes to signal delivery, SIGCONT is the normal signal and does not need any special support. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2011-04-01 18:11:50 +00:00
* Remove all stop signals from all queues, wake all threads.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
signals: kill rm_from_queue(), change prepare_signal() to use for_each_thread() rm_from_queue() doesn't make sense. The only caller, prepare_signal(), can use rm_from_queue_full() with the same effect. While at it, change prepare_signal() to use for_each_thread() instead of do/while_each_thread. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Richard Weinberger <richard@nod.at> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 21:36:48 +00:00
siginitset(&flush, SIG_KERNEL_STOP_MASK);
signals: rename rm_from_queue_full() to flush_sigqueue_mask() "rm_from_queue_full" looks ugly and misleading, especially now that rm_from_queue() has gone away. Rename it to flush_sigqueue_mask(), this matches flush_sigqueue() we already have. Also remove the obsolete comment which explains the difference with rm_from_queue() we already killed. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Richard Weinberger <richard@nod.at> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 21:36:50 +00:00
flush_sigqueue_mask(&flush, &signal->shared_pending);
signals: kill rm_from_queue(), change prepare_signal() to use for_each_thread() rm_from_queue() doesn't make sense. The only caller, prepare_signal(), can use rm_from_queue_full() with the same effect. While at it, change prepare_signal() to use for_each_thread() instead of do/while_each_thread. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Richard Weinberger <richard@nod.at> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 21:36:48 +00:00
for_each_thread(p, t) {
signals: rename rm_from_queue_full() to flush_sigqueue_mask() "rm_from_queue_full" looks ugly and misleading, especially now that rm_from_queue() has gone away. Rename it to flush_sigqueue_mask(), this matches flush_sigqueue() we already have. Also remove the obsolete comment which explains the difference with rm_from_queue() we already killed. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Richard Weinberger <richard@nod.at> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 21:36:50 +00:00
flush_sigqueue_mask(&flush, &t->pending);
job control: introduce JOBCTL_PENDING_MASK and task_clear_jobctl_pending() This patch introduces JOBCTL_PENDING_MASK and replaces task_clear_jobctl_stop_pending() with task_clear_jobctl_pending() which takes an extra @mask argument. JOBCTL_PENDING_MASK is currently equal to JOBCTL_STOP_PENDING but future patches will add more bits. recalc_sigpending_tsk() is updated to use JOBCTL_PENDING_MASK instead. task_clear_jobctl_pending() takes @mask which in subset of JOBCTL_PENDING_MASK and clears the relevant jobctl bits. If JOBCTL_STOP_PENDING is set, other STOP bits are cleared together. All task_clear_jobctl_stop_pending() users are updated to call task_clear_jobctl_pending() with JOBCTL_STOP_PENDING which is functionally identical to task_clear_jobctl_stop_pending(). This patch doesn't cause any functional change. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-02 09:14:00 +00:00
task_clear_jobctl_pending(t, JOBCTL_STOP_PENDING);
ptrace: implement TRAP_NOTIFY and use it for group stop events Currently there's no way for ptracer to find out whether group stop finished other than polling with INTERRUPT - GETSIGINFO - CONT sequence. This patch implements group stop notification for ptracer using STOP traps. When group stop state of a seized tracee changes, JOBCTL_TRAP_NOTIFY is set, which schedules a STOP trap which is sticky - it isn't cleared by other traps and at least one STOP trap will happen eventually. STOP trap is synchronization point for event notification and the tracer can determine the current group stop state by looking at the signal number portion of exit code (si_status from waitid(2) or si_code from PTRACE_GETSIGINFO). Notifications are generated both on start and end of group stops but, because group stop participation always happens before STOP trap, this doesn't cause an extra trap while tracee is participating in group stop. The symmetry will be useful later. Note that this notification works iff tracee is not trapped. Currently there is no way to be notified of group stop state changes while tracee is trapped. This will be addressed by a later patch. An example program follows. #define PTRACE_SEIZE 0x4206 #define PTRACE_INTERRUPT 0x4207 #define PTRACE_SEIZE_DEVEL 0x80000000 static const struct timespec ts1s = { .tv_sec = 1 }; int main(int argc, char **argv) { pid_t tracee, tracer; int i; tracee = fork(); if (!tracee) while (1) pause(); tracer = fork(); if (!tracer) { siginfo_t si; ptrace(PTRACE_SEIZE, tracee, NULL, (void *)(unsigned long)PTRACE_SEIZE_DEVEL); ptrace(PTRACE_INTERRUPT, tracee, NULL, NULL); repeat: waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_GETSIGINFO, tracee, NULL, &si); if (!si.si_code) { printf("tracer: SIG %d\n", si.si_signo); ptrace(PTRACE_CONT, tracee, NULL, (void *)(unsigned long)si.si_signo); goto repeat; } printf("tracer: stopped=%d signo=%d\n", si.si_signo != SIGTRAP, si.si_signo); ptrace(PTRACE_CONT, tracee, NULL, NULL); goto repeat; } for (i = 0; i < 3; i++) { nanosleep(&ts1s, NULL); printf("mother: SIGSTOP\n"); kill(tracee, SIGSTOP); nanosleep(&ts1s, NULL); printf("mother: SIGCONT\n"); kill(tracee, SIGCONT); } nanosleep(&ts1s, NULL); kill(tracer, SIGKILL); kill(tracee, SIGKILL); return 0; } In the above program, tracer keeps tracee running and gets notification of each group stop state changes. # ./test-notify tracer: stopped=0 signo=5 mother: SIGSTOP tracer: SIG 19 tracer: stopped=1 signo=19 mother: SIGCONT tracer: stopped=0 signo=5 tracer: SIG 18 mother: SIGSTOP tracer: SIG 19 tracer: stopped=1 signo=19 mother: SIGCONT tracer: stopped=0 signo=5 tracer: SIG 18 mother: SIGSTOP tracer: SIG 19 tracer: stopped=1 signo=19 mother: SIGCONT tracer: stopped=0 signo=5 tracer: SIG 18 Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 09:20:17 +00:00
if (likely(!(t->ptrace & PT_SEIZED)))
wake_up_state(t, __TASK_STOPPED);
else
ptrace_trap_notify(t);
signals: kill rm_from_queue(), change prepare_signal() to use for_each_thread() rm_from_queue() doesn't make sense. The only caller, prepare_signal(), can use rm_from_queue_full() with the same effect. While at it, change prepare_signal() to use for_each_thread() instead of do/while_each_thread. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Richard Weinberger <richard@nod.at> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 21:36:48 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
handle_stop_signal: unify partial/full stop handling Now that handle_stop_signal() doesn't drop ->siglock, we can't see both ->group_stop_count && SIGNAL_STOP_STOPPED. Merge two "if" branches. As Roland pointed out, we never actually needed 2 do_notify_parent_cldstop() calls. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:46 +00:00
/*
* Notify the parent with CLD_CONTINUED if we were stopped.
*
* If we were in the middle of a group stop, we pretend it
* was already finished, and then continued. Since SIGCHLD
* doesn't queue we report only CLD_STOPPED, as if the next
* CLD_CONTINUED was dropped.
*/
why = 0;
handle_stop_signal: use the cached p->signal value Cache the value of p->signal, and change the code to use while_each_thread() helper. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:46 +00:00
if (signal->flags & SIGNAL_STOP_STOPPED)
handle_stop_signal: unify partial/full stop handling Now that handle_stop_signal() doesn't drop ->siglock, we can't see both ->group_stop_count && SIGNAL_STOP_STOPPED. Merge two "if" branches. As Roland pointed out, we never actually needed 2 do_notify_parent_cldstop() calls. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:46 +00:00
why |= SIGNAL_CLD_CONTINUED;
handle_stop_signal: use the cached p->signal value Cache the value of p->signal, and change the code to use while_each_thread() helper. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:46 +00:00
else if (signal->group_stop_count)
handle_stop_signal: unify partial/full stop handling Now that handle_stop_signal() doesn't drop ->siglock, we can't see both ->group_stop_count && SIGNAL_STOP_STOPPED. Merge two "if" branches. As Roland pointed out, we never actually needed 2 do_notify_parent_cldstop() calls. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:46 +00:00
why |= SIGNAL_CLD_STOPPED;
if (why) {
signals: document CLD_CONTINUED notification mechanics A couple of small comments about how CLD_CONTINUED notification works. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:53:00 +00:00
/*
signals: tracehook_notify_jctl change This changes tracehook_notify_jctl() so it's called with the siglock held, and changes its argument and return value definition. These clean-ups make it a better fit for what new tracing hooks need to check. Tracing needs the siglock here, held from the time TASK_STOPPED was set, to avoid potential SIGCONT races if it wants to allow any blocking in its tracing hooks. This also folds the finish_stop() function into its caller do_signal_stop(). The function is short, called only once and only unconditionally. It aids readability to fold it in. [oleg@redhat.com: do not call tracehook_notify_jctl() in TASK_STOPPED state] [oleg@redhat.com: introduce tracehook_finish_jctl() helper] Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 22:56:53 +00:00
* The first thread which returns from do_signal_stop()
signals: document CLD_CONTINUED notification mechanics A couple of small comments about how CLD_CONTINUED notification works. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:53:00 +00:00
* will take ->siglock, notice SIGNAL_CLD_MASK, and
kernel/signal.c: fix a comment error Because get_signal_to_deliver() was renamed to get_signal() the comment should be fixed. Link: http://lkml.kernel.org/r/1539179128-45709-1-git-send-email-swkhack@gmail.com Signed-off-by: Weikang Shi <swkhack@gmail.com> Reported-by: Christian Brauner <christian@brauner.io> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Anna-Maria Gleixner <anna-maria@linutronix.de> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 22:07:05 +00:00
* notify its parent. See get_signal().
signals: document CLD_CONTINUED notification mechanics A couple of small comments about how CLD_CONTINUED notification works. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:53:00 +00:00
*/
signal: protect SIGNAL_UNKILLABLE from unintentional clearing. Since commit 00cd5c37afd5 ("ptrace: permit ptracing of /sbin/init") we can now trace init processes. init is initially protected with SIGNAL_UNKILLABLE which will prevent fatal signals such as SIGSTOP, but there are a number of paths during tracing where SIGNAL_UNKILLABLE can be implicitly cleared. This can result in init becoming stoppable/killable after tracing. For example, running: while true; do kill -STOP 1; done & strace -p 1 and then stopping strace and the kill loop will result in init being left in state TASK_STOPPED. Sending SIGCONT to init will resume it, but init will now respond to future SIGSTOP signals rather than ignoring them. Make sure that when setting SIGNAL_STOP_CONTINUED/SIGNAL_STOP_STOPPED that we don't clear SIGNAL_UNKILLABLE. Link: http://lkml.kernel.org/r/20170104122017.25047-1-jamie.iles@oracle.com Signed-off-by: Jamie Iles <jamie.iles@oracle.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-11 00:57:54 +00:00
signal_set_stop_flags(signal, why | SIGNAL_STOP_CONTINUED);
handle_stop_signal: use the cached p->signal value Cache the value of p->signal, and change the code to use while_each_thread() helper. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:46 +00:00
signal->group_stop_count = 0;
signal->group_exit_code = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
}
signals: fold sig_ignored() into handle_stop_signal() Rename handle_stop_signal() to prepare_signal(), make it return a boolean, and move the callsites of sig_ignored() into it. No functional changes for now. But it would be nice to factor out the "should we drop this signal" checks as much as possible, before we try to fix the bugs with the sub-namespace init's signals (actually the global /sbin/init has some problems with signals too). Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:59 +00:00
signal: cosmetic, s/from_ancestor_ns/force/ in prepare_signal() paths Cosmetic, rename the from_ancestor_ns argument in prepare_signal() paths. After the previous change it doesn't match the reality. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Anton Vorontsov <anton.vorontsov@linaro.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23 22:02:45 +00:00
return !sig_ignored(p, sig, force);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
signals: move the definition of __group_complete_signal() up Move the unchanged definition of __group_complete_signal() so that send_signal can see it. To simplify the reading of the next patches. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:53 +00:00
/*
* Test if P wants to take SIG. After we've checked all threads with this,
* it's equivalent to finding no threads not blocking SIG. Any threads not
* blocking SIG were ruled out because they are not running and already
* have pending signals. Such threads will dequeue from the shared queue
* as soon as they're available, so putting the signal on the shared queue
* will be equivalent to sending it to one such thread.
*/
signal: make wants_signal() return bool wants_signal() already behaves like a boolean function. Let's actually declare it as such too. Link: http://lkml.kernel.org/r/20180602103653.18181-15-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Morris <james.morris@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 05:00:42 +00:00
static inline bool wants_signal(int sig, struct task_struct *p)
signals: move the definition of __group_complete_signal() up Move the unchanged definition of __group_complete_signal() so that send_signal can see it. To simplify the reading of the next patches. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:53 +00:00
{
if (sigismember(&p->blocked, sig))
signal: make wants_signal() return bool wants_signal() already behaves like a boolean function. Let's actually declare it as such too. Link: http://lkml.kernel.org/r/20180602103653.18181-15-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Morris <james.morris@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 05:00:42 +00:00
return false;
signals: move the definition of __group_complete_signal() up Move the unchanged definition of __group_complete_signal() so that send_signal can see it. To simplify the reading of the next patches. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:53 +00:00
if (p->flags & PF_EXITING)
signal: make wants_signal() return bool wants_signal() already behaves like a boolean function. Let's actually declare it as such too. Link: http://lkml.kernel.org/r/20180602103653.18181-15-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Morris <james.morris@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 05:00:42 +00:00
return false;
signals: move the definition of __group_complete_signal() up Move the unchanged definition of __group_complete_signal() so that send_signal can see it. To simplify the reading of the next patches. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:53 +00:00
if (sig == SIGKILL)
signal: make wants_signal() return bool wants_signal() already behaves like a boolean function. Let's actually declare it as such too. Link: http://lkml.kernel.org/r/20180602103653.18181-15-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Morris <james.morris@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 05:00:42 +00:00
return true;
signals: move the definition of __group_complete_signal() up Move the unchanged definition of __group_complete_signal() so that send_signal can see it. To simplify the reading of the next patches. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:53 +00:00
if (task_is_stopped_or_traced(p))
signal: make wants_signal() return bool wants_signal() already behaves like a boolean function. Let's actually declare it as such too. Link: http://lkml.kernel.org/r/20180602103653.18181-15-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Morris <james.morris@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 05:00:42 +00:00
return false;
signals: move the definition of __group_complete_signal() up Move the unchanged definition of __group_complete_signal() so that send_signal can see it. To simplify the reading of the next patches. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:53 +00:00
return task_curr(p) || !signal_pending(p);
}
signal: Push pid type down into complete_signal. This is the bottom and by pushing this down it simplifies the callers and otherwise leaves things as is. This is in preparation for allowing fork to implement better handling of signals set to groups of processes. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-07-14 02:39:13 +00:00
static void complete_signal(int sig, struct task_struct *p, enum pid_type type)
signals: move the definition of __group_complete_signal() up Move the unchanged definition of __group_complete_signal() so that send_signal can see it. To simplify the reading of the next patches. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:53 +00:00
{
struct signal_struct *signal = p->signal;
struct task_struct *t;
/*
* Now find a thread we can wake up to take the signal off the queue.
*
* If the main thread wants the signal, it gets first crack.
* Probably the least surprising to the average bear.
*/
if (wants_signal(sig, p))
t = p;
signal: Push pid type down into complete_signal. This is the bottom and by pushing this down it simplifies the callers and otherwise leaves things as is. This is in preparation for allowing fork to implement better handling of signals set to groups of processes. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-07-14 02:39:13 +00:00
else if ((type == PIDTYPE_PID) || thread_group_empty(p))
signals: move the definition of __group_complete_signal() up Move the unchanged definition of __group_complete_signal() so that send_signal can see it. To simplify the reading of the next patches. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:53 +00:00
/*
* There is just one thread and it does not need to be woken.
* It will dequeue unblocked signals before it runs again.
*/
return;
else {
/*
* Otherwise try to find a suitable thread.
*/
t = signal->curr_target;
while (!wants_signal(sig, t)) {
t = next_thread(t);
if (t == signal->curr_target)
/*
* No thread needs to be woken.
* Any eligible threads will see
* the signal in the queue soon.
*/
return;
}
signal->curr_target = t;
}
/*
* Found a killable thread. If the signal will be fatal,
* then start taking the whole group down immediately.
*/
signals: fix /sbin/init protection from unwanted signals The global init has a lot of long standing problems with the unhandled fatal signals. - The "is_global_init(current)" check in get_signal_to_deliver() protects only the main thread. Sub-thread can dequee the fatal signal and shutdown the whole thread group except the main thread. If it dequeues SIGSTOP /sbin/init will be stopped, this is not right too. Note that we can't use is_global_init(->group_leader), this breaks exec and this can't solve other problems we have. - Even if afterwards ignored, the fatal signals sets SIGNAL_GROUP_EXIT on delivery. This breaks exec, has other bad implications, and this is just wrong. Introduce the new SIGNAL_UNKILLABLE flag to fix these problems. It also helps to solve some other problems addressed by the subsequent patches. Currently we use this flag for the global init only, but it could also be used by kthreads and (perhaps) by the sub-namespace inits. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:53:03 +00:00
if (sig_fatal(p, sig) &&
kernel/signal.c: remove the no longer needed SIGNAL_UNKILLABLE check in complete_signal() complete_signal() checks SIGNAL_UNKILLABLE before it starts to destroy the thread group, today this is wrong in many ways. If nothing else, fatal_signal_pending() should always imply that the whole thread group (except ->group_exit_task if it is not NULL) is killed, this check breaks the rule. After the previous changes we can rely on sig_task_ignored(); sig_fatal(sig) && SIGNAL_UNKILLABLE can only be true if we actually want to kill this task and sig == SIGKILL OR it is traced and debugger can intercept the signal. This should hopefully fix the problem reported by Dmitry. This test-case static int init(void *arg) { for (;;) pause(); } int main(void) { char stack[16 * 1024]; for (;;) { int pid = clone(init, stack + sizeof(stack)/2, CLONE_NEWPID | SIGCHLD, NULL); assert(pid > 0); assert(ptrace(PTRACE_ATTACH, pid, 0, 0) == 0); assert(waitpid(-1, NULL, WSTOPPED) == pid); assert(ptrace(PTRACE_DETACH, pid, 0, SIGSTOP) == 0); assert(syscall(__NR_tkill, pid, SIGKILL) == 0); assert(pid == wait(NULL)); } } triggers the WARN_ON_ONCE(!(task->jobctl & JOBCTL_STOP_PENDING)) in task_participate_group_stop(). do_signal_stop()->signal_group_exit() checks SIGNAL_GROUP_EXIT and return false, but task_set_jobctl_pending() checks fatal_signal_pending() and does not set JOBCTL_STOP_PENDING. And his should fix the minor security problem reported by Kyle, SECCOMP_RET_TRACE can miss fatal_signal_pending() the same way if the task is the root of a pid namespace. Link: http://lkml.kernel.org/r/20171103184246.GD21036@redhat.com Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Reported-by: Kyle Huey <me@kylehuey.com> Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Kyle Huey <me@kylehuey.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-17 23:30:08 +00:00
!(signal->flags & SIGNAL_GROUP_EXIT) &&
signals: move the definition of __group_complete_signal() up Move the unchanged definition of __group_complete_signal() so that send_signal can see it. To simplify the reading of the next patches. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:53 +00:00
!sigismember(&t->real_blocked, sig) &&
kernel/signal.c: remove the no longer needed SIGNAL_UNKILLABLE check in complete_signal() complete_signal() checks SIGNAL_UNKILLABLE before it starts to destroy the thread group, today this is wrong in many ways. If nothing else, fatal_signal_pending() should always imply that the whole thread group (except ->group_exit_task if it is not NULL) is killed, this check breaks the rule. After the previous changes we can rely on sig_task_ignored(); sig_fatal(sig) && SIGNAL_UNKILLABLE can only be true if we actually want to kill this task and sig == SIGKILL OR it is traced and debugger can intercept the signal. This should hopefully fix the problem reported by Dmitry. This test-case static int init(void *arg) { for (;;) pause(); } int main(void) { char stack[16 * 1024]; for (;;) { int pid = clone(init, stack + sizeof(stack)/2, CLONE_NEWPID | SIGCHLD, NULL); assert(pid > 0); assert(ptrace(PTRACE_ATTACH, pid, 0, 0) == 0); assert(waitpid(-1, NULL, WSTOPPED) == pid); assert(ptrace(PTRACE_DETACH, pid, 0, SIGSTOP) == 0); assert(syscall(__NR_tkill, pid, SIGKILL) == 0); assert(pid == wait(NULL)); } } triggers the WARN_ON_ONCE(!(task->jobctl & JOBCTL_STOP_PENDING)) in task_participate_group_stop(). do_signal_stop()->signal_group_exit() checks SIGNAL_GROUP_EXIT and return false, but task_set_jobctl_pending() checks fatal_signal_pending() and does not set JOBCTL_STOP_PENDING. And his should fix the minor security problem reported by Kyle, SECCOMP_RET_TRACE can miss fatal_signal_pending() the same way if the task is the root of a pid namespace. Link: http://lkml.kernel.org/r/20171103184246.GD21036@redhat.com Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Reported-by: Kyle Huey <me@kylehuey.com> Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Kyle Huey <me@kylehuey.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-17 23:30:08 +00:00
(sig == SIGKILL || !p->ptrace)) {
signals: move the definition of __group_complete_signal() up Move the unchanged definition of __group_complete_signal() so that send_signal can see it. To simplify the reading of the next patches. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:53 +00:00
/*
* This signal will be fatal to the whole group.
*/
if (!sig_kernel_coredump(sig)) {
/*
* Start a group exit and wake everybody up.
* This way we don't have other threads
* running and doing things after a slower
* thread has the fatal signal pending.
*/
signal->flags = SIGNAL_GROUP_EXIT;
signal->group_exit_code = sig;
signal->group_stop_count = 0;
t = p;
do {
job control: make task_clear_jobctl_pending() clear TRAPPING automatically JOBCTL_TRAPPING indicates that ptracer is waiting for tracee to (re)transit into TRACED. task_clear_jobctl_pending() must be called when either tracee enters TRACED or the transition is cancelled for some reason. The former is achieved by explicitly calling task_clear_jobctl_pending() in ptrace_stop() and the latter by calling it at the end of do_signal_stop(). Calling task_clear_jobctl_trapping() at the end of do_signal_stop() limits the scope TRAPPING can be used and is fragile in that seemingly unrelated changes to tracee's control flow can lead to stuck TRAPPING. We already have task_clear_jobctl_pending() calls on those cancelling events to clear JOBCTL_STOP_PENDING. Cancellations can be handled by making those call sites use JOBCTL_PENDING_MASK instead and updating task_clear_jobctl_pending() such that task_clear_jobctl_trapping() is called automatically if no stop/trap is pending. This patch makes the above changes and removes the fallback task_clear_jobctl_trapping() call from do_signal_stop(). Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-02 09:14:00 +00:00
task_clear_jobctl_pending(t, JOBCTL_PENDING_MASK);
signals: move the definition of __group_complete_signal() up Move the unchanged definition of __group_complete_signal() so that send_signal can see it. To simplify the reading of the next patches. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:53 +00:00
sigaddset(&t->pending.signal, SIGKILL);
signal_wake_up(t, 1);
} while_each_thread(p, t);
return;
}
}
/*
* The signal is already in the shared-pending queue.
* Tell the chosen thread to wake up and dequeue it.
*/
signal_wake_up(t, sig == SIGKILL);
return;
}
signal: make legacy_queue() return bool legacy_queue() already behaves like a boolean function. Let's actually declare it as such too. Link: http://lkml.kernel.org/r/20180602103653.18181-16-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Morris <james.morris@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 05:00:46 +00:00
static inline bool legacy_queue(struct sigpending *signals, int sig)
signals: turn LEGACY_QUEUE macro into static inline function This makes the code more readable, due to less brackets and small letters in name. I also move it above the send_signal() as a preparation for the 3rd patch. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:34 +00:00
{
return (sig < SIGRTMIN) && sigismember(&signals->signal, sig);
}
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
static int __send_signal(int sig, struct kernel_siginfo *info, struct task_struct *t,
signal: Move the computation of force into send_signal and correct it. Forcing a signal or not allowing a pid namespace init to ignore SIGKILL or SIGSTOP is more cleanly computed in send_signal. There are two cases where we don't allow a pid namespace init to ignore SIGKILL or SIGSTOP. If the sending process is from an ancestor pid namespace and as such is effectively the god to the target process, and if the it is the kernel that is sending the signal, not another application. It is known that a process is from an ancestor pid namespace if it can see it's target but it's target does not have a pid for the sender in it's pid namespace. It is know that a signal is sent from the kernel if si_code is set to SI_KERNEL or info is SEND_SIG_PRIV (which ultimately generates a signal with si_code == SI_KERNEL). The only signals that matter are SIGKILL and SIGSTOP neither of which can really be caught, and both of which always have a siginfo layout that includes si_uid and si_pid. Therefore we never need to worry about forcing a signal when si_pid and si_uid are absent. So handle the two special cases of info and the case when si_pid and si_uid are present. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-16 03:23:32 +00:00
enum pid_type type, bool force)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
signals: change send_signal/do_send_sigqueue to take "boolean group" parameter send_signal() is used either with ->pending or with ->signal->shared_pending. Change it to take "int group" instead, this argument will be re-used later. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:54 +00:00
struct sigpending *pending;
signals: move handle_stop_signal() into send_signal() Move handle_stop_signal() into send_signal(). This factors out a couple of callsites and allows us to do further unifications. Also, with this change specific_send_sig_info() does handle_stop_signal(). Not that this is really important, we never send STOP/CONT via send_sig() and friends, but still this looks more consistent. The only (afaics) special case is get_signal_to_deliver(). If the traced task dequeues SIGCONT, it can re-send it to itself after ptrace_stop() if the signal was blocked by debugger. In that case handle_stop_signal() is unnecessary, but hopefully not a problem. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:50 +00:00
struct sigqueue *q;
signal: fix __send_signal() false positive kmemcheck warning This false positive is due to field padding in struct sigqueue. When this dynamically allocated structure is copied to the stack (in arch- specific delivery code), kmemcheck sees a read from the padding, which is, naturally, uninitialized. Hide the false positive using the __GFP_NOTRACK_FALSE_POSITIVE flag. Also made the rlimit override code a bit clearer by introducing a new variable. Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
2009-05-16 09:28:33 +00:00
int override_rlimit;
tracing: let trace_signal_generate() report more info, kill overflow_fail/lose_info __send_signal()->trace_signal_generate() doesn't report enough info. The users want to know was the signal actually delivered or not, and they also need the shared/private info. The patch moves trace_signal_generate() at the end of __send_signal() and adds the 2 additional arguments. This also allows us to kill trace_signal_overflow_fail/lose_info, we can simply add the appropriate TRACE_SIGNAL_ "result" codes. Reported-by: Seiji Aguchi <saguchi@redhat.com> Reviewed-by: Seiji Aguchi <seiji.aguchi@hds.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-11-22 20:13:48 +00:00
int ret = 0, result;
tracing, sched: LTTng instrumentation - scheduler Instrument the scheduler activity (sched_switch, migration, wakeups, wait for a task, signal delivery) and process/thread creation/destruction (fork, exit, kthread stop). Actually, kthread creation is not instrumented in this patch because it is architecture dependent. It allows to connect tracers such as ftrace which detects scheduling latencies, good/bad scheduler decisions. Tools like LTTng can export this scheduler information along with instrumentation of the rest of the kernel activity to perform post-mortem analysis on the scheduler activity. About the performance impact of tracepoints (which is comparable to markers), even without immediate values optimizations, tests done by Hideo Aoki on ia64 show no regression. His test case was using hackbench on a kernel where scheduler instrumentation (about 5 events in code scheduler code) was added. See the "Tracepoints" patch header for performance result detail. Changelog : - Change instrumentation location and parameter to match ftrace instrumentation, previously done with kernel markers. [ mingo@elte.hu: conflict resolutions ] Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Acked-by: 'Peter Zijlstra' <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18 16:16:17 +00:00
signals: move handle_stop_signal() into send_signal() Move handle_stop_signal() into send_signal(). This factors out a couple of callsites and allows us to do further unifications. Also, with this change specific_send_sig_info() does handle_stop_signal(). Not that this is really important, we never send STOP/CONT via send_sig() and friends, but still this looks more consistent. The only (afaics) special case is get_signal_to_deliver(). If the traced task dequeues SIGCONT, it can re-send it to itself after ptrace_stop() if the signal was blocked by debugger. In that case handle_stop_signal() is unnecessary, but hopefully not a problem. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:50 +00:00
assert_spin_locked(&t->sighand->siglock);
signals: protect cinit from unblocked SIG_DFL signals Drop early any SIG_DFL or SIG_IGN signals to container-init from within the same container. But queue SIGSTOP and SIGKILL to the container-init if they are from an ancestor container. Blocked, fatal signals (i.e when SIG_DFL is to terminate) from within the container can still terminate the container-init. That will be addressed in the next patch. Note: To be bisect-safe, SIGNAL_UNKILLABLE will be set for container-inits in a follow-on patch. Until then, this patch is just a preparatory step. Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Daniel Lezcano <daniel.lezcano@free.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 23:58:05 +00:00
tracing: let trace_signal_generate() report more info, kill overflow_fail/lose_info __send_signal()->trace_signal_generate() doesn't report enough info. The users want to know was the signal actually delivered or not, and they also need the shared/private info. The patch moves trace_signal_generate() at the end of __send_signal() and adds the 2 additional arguments. This also allows us to kill trace_signal_overflow_fail/lose_info, we can simply add the appropriate TRACE_SIGNAL_ "result" codes. Reported-by: Seiji Aguchi <saguchi@redhat.com> Reviewed-by: Seiji Aguchi <seiji.aguchi@hds.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-11-22 20:13:48 +00:00
result = TRACE_SIGNAL_IGNORED;
signal: Move the computation of force into send_signal and correct it. Forcing a signal or not allowing a pid namespace init to ignore SIGKILL or SIGSTOP is more cleanly computed in send_signal. There are two cases where we don't allow a pid namespace init to ignore SIGKILL or SIGSTOP. If the sending process is from an ancestor pid namespace and as such is effectively the god to the target process, and if the it is the kernel that is sending the signal, not another application. It is known that a process is from an ancestor pid namespace if it can see it's target but it's target does not have a pid for the sender in it's pid namespace. It is know that a signal is sent from the kernel if si_code is set to SI_KERNEL or info is SEND_SIG_PRIV (which ultimately generates a signal with si_code == SI_KERNEL). The only signals that matter are SIGKILL and SIGSTOP neither of which can really be caught, and both of which always have a siginfo layout that includes si_uid and si_pid. Therefore we never need to worry about forcing a signal when si_pid and si_uid are absent. So handle the two special cases of info and the case when si_pid and si_uid are present. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-16 03:23:32 +00:00
if (!prepare_signal(sig, t, force))
tracing: let trace_signal_generate() report more info, kill overflow_fail/lose_info __send_signal()->trace_signal_generate() doesn't report enough info. The users want to know was the signal actually delivered or not, and they also need the shared/private info. The patch moves trace_signal_generate() at the end of __send_signal() and adds the 2 additional arguments. This also allows us to kill trace_signal_overflow_fail/lose_info, we can simply add the appropriate TRACE_SIGNAL_ "result" codes. Reported-by: Seiji Aguchi <saguchi@redhat.com> Reviewed-by: Seiji Aguchi <seiji.aguchi@hds.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-11-22 20:13:48 +00:00
goto ret;
signals: change send_signal/do_send_sigqueue to take "boolean group" parameter send_signal() is used either with ->pending or with ->signal->shared_pending. Change it to take "int group" instead, this argument will be re-used later. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:54 +00:00
signal: Push pid type down into __send_signal This information is already available in the callers and by pushing it down it makes the code a little clearer, and allows implementing better handling of signales set to a group of processes in fork. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-07-14 00:26:27 +00:00
pending = (type != PIDTYPE_PID) ? &t->signal->shared_pending : &t->pending;
signals: consolidate checking for ignored/legacy signals Two callers for send_signal() - the specific_send_sig_info and the __group_send_sig_info - both check for sig to be ignored or already queued. Move these checks into send_signal() and make it return 1 to indicate that the signal is dropped, but there's no error in this. Besides, merge comments and spell-check them. [oleg@tv-sign.ru: simplifications] Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:35 +00:00
/*
* Short-circuit ignored signals and support queuing
* exactly one non-rt signal, so that we can get more
* detailed information about the cause of the signal.
*/
tracing: let trace_signal_generate() report more info, kill overflow_fail/lose_info __send_signal()->trace_signal_generate() doesn't report enough info. The users want to know was the signal actually delivered or not, and they also need the shared/private info. The patch moves trace_signal_generate() at the end of __send_signal() and adds the 2 additional arguments. This also allows us to kill trace_signal_overflow_fail/lose_info, we can simply add the appropriate TRACE_SIGNAL_ "result" codes. Reported-by: Seiji Aguchi <saguchi@redhat.com> Reviewed-by: Seiji Aguchi <seiji.aguchi@hds.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-11-22 20:13:48 +00:00
result = TRACE_SIGNAL_ALREADY_PENDING;
signals: fold sig_ignored() into handle_stop_signal() Rename handle_stop_signal() to prepare_signal(), make it return a boolean, and move the callsites of sig_ignored() into it. No functional changes for now. But it would be nice to factor out the "should we drop this signal" checks as much as possible, before we try to fix the bugs with the sub-namespace init's signals (actually the global /sbin/init has some problems with signals too). Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:59 +00:00
if (legacy_queue(pending, sig))
tracing: let trace_signal_generate() report more info, kill overflow_fail/lose_info __send_signal()->trace_signal_generate() doesn't report enough info. The users want to know was the signal actually delivered or not, and they also need the shared/private info. The patch moves trace_signal_generate() at the end of __send_signal() and adds the 2 additional arguments. This also allows us to kill trace_signal_overflow_fail/lose_info, we can simply add the appropriate TRACE_SIGNAL_ "result" codes. Reported-by: Seiji Aguchi <saguchi@redhat.com> Reviewed-by: Seiji Aguchi <seiji.aguchi@hds.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-11-22 20:13:48 +00:00
goto ret;
result = TRACE_SIGNAL_DELIVERED;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
signal: Always attempt to allocate siginfo for SIGSTOP Since 2.5.34 the code has had the potential to not allocate siginfo for SIGSTOP signals. Except for ptrace this is perfectly fine as only ptrace can use PTRACE_PEEK_SIGINFO and see what the contents of the delivered siginfo are. Users of PTRACE_PEEK_SIGINFO that care about the contents siginfo for SIGSTOP are rare, but they do exist. A seccomp self test has cared and lldb cares. Jack Andersen <jackoalan@gmail.com> writes: > The patch titled > `signal: Never allocate siginfo for SIGKILL or SIGSTOP` > created a regression for users of PTRACE_GETSIGINFO needing to > discern signals that were raised via the tgkill syscall. > > A notable user of this tgkill+ptrace combination is lldb while > debugging a multithreaded program. Without the ability to detect a > SIGSTOP originating from tgkill, lldb does not have a way to > synchronize on a per-thread basis and falls back to SIGSTOP-ing the > entire process. Everyone affected by this please note. The kernel can still fail to allocate a siginfo structure. The allocation is with GFP_KERNEL and is best effort only. If memory is tight when the signal allocation comes in this will fail to allocate a siginfo. So I strongly recommend looking at more robust solutions for synchronizing with a single thread such as PTRACE_INTERRUPT. Or if that does not work persuading your friendly local kernel developer to build the interface you need. Reported-by: Tycho Andersen <tycho@tycho.ws> Reported-by: Kees Cook <keescook@chromium.org> Reported-by: Jack Andersen <jackoalan@gmail.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Christian Brauner <christian@brauner.io> Cc: stable@vger.kernel.org Fixes: f149b3155744 ("signal: Never allocate siginfo for SIGKILL or SIGSTOP") Fixes: 6dfc88977e42 ("[PATCH] shared thread signals") History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-02-05 13:19:11 +00:00
* Skip useless siginfo allocation for SIGKILL and kernel threads.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
signal: Always attempt to allocate siginfo for SIGSTOP Since 2.5.34 the code has had the potential to not allocate siginfo for SIGSTOP signals. Except for ptrace this is perfectly fine as only ptrace can use PTRACE_PEEK_SIGINFO and see what the contents of the delivered siginfo are. Users of PTRACE_PEEK_SIGINFO that care about the contents siginfo for SIGSTOP are rare, but they do exist. A seccomp self test has cared and lldb cares. Jack Andersen <jackoalan@gmail.com> writes: > The patch titled > `signal: Never allocate siginfo for SIGKILL or SIGSTOP` > created a regression for users of PTRACE_GETSIGINFO needing to > discern signals that were raised via the tgkill syscall. > > A notable user of this tgkill+ptrace combination is lldb while > debugging a multithreaded program. Without the ability to detect a > SIGSTOP originating from tgkill, lldb does not have a way to > synchronize on a per-thread basis and falls back to SIGSTOP-ing the > entire process. Everyone affected by this please note. The kernel can still fail to allocate a siginfo structure. The allocation is with GFP_KERNEL and is best effort only. If memory is tight when the signal allocation comes in this will fail to allocate a siginfo. So I strongly recommend looking at more robust solutions for synchronizing with a single thread such as PTRACE_INTERRUPT. Or if that does not work persuading your friendly local kernel developer to build the interface you need. Reported-by: Tycho Andersen <tycho@tycho.ws> Reported-by: Kees Cook <keescook@chromium.org> Reported-by: Jack Andersen <jackoalan@gmail.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Christian Brauner <christian@brauner.io> Cc: stable@vger.kernel.org Fixes: f149b3155744 ("signal: Never allocate siginfo for SIGKILL or SIGSTOP") Fixes: 6dfc88977e42 ("[PATCH] shared thread signals") History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-02-05 13:19:11 +00:00
if ((sig == SIGKILL) || (t->flags & PF_KTHREAD))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
goto out_set;
kernel/signal.c: fix typos and coding style General coding style and comment fixes; no code changes: - Use multi-line-comment coding style. - Put some function signatures completely on one line. - Hyphenate some words. - Spell Posix as POSIX. - Correct typos & spellos in some comments. - Drop trailing whitespace. - End sentences with periods. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-04 21:59:31 +00:00
/*
* Real-time signals must be queued if sent by sigqueue, or
* some other real-time mechanism. It is implementation
* defined whether kill() does so. We attempt to do so, on
* the principle of least surprise, but since kill is not
* allowed to fail with EAGAIN when low on memory we just
* make sure at least one signal gets delivered and don't
* pass on the info struct.
*/
signal: fix __send_signal() false positive kmemcheck warning This false positive is due to field padding in struct sigqueue. When this dynamically allocated structure is copied to the stack (in arch- specific delivery code), kmemcheck sees a read from the padding, which is, naturally, uninitialized. Hide the false positive using the __GFP_NOTRACK_FALSE_POSITIVE flag. Also made the rlimit override code a bit clearer by introducing a new variable. Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
2009-05-16 09:28:33 +00:00
if (sig < SIGRTMIN)
override_rlimit = (is_si_special(info) || info->si_code >= 0);
else
override_rlimit = 0;
kmemcheck: stop using GFP_NOTRACK and SLAB_NOTRACK Convert all allocations that used a NOTRACK flag to stop using it. Link: http://lkml.kernel.org/r/20171007030159.22241-3-alexander.levin@verizon.com Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Cc: Alexander Potapenko <glider@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tim Hansen <devtimhansen@gmail.com> Cc: Vegard Nossum <vegardno@ifi.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-16 01:35:54 +00:00
q = __sigqueue_alloc(sig, t, GFP_ATOMIC, override_rlimit);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (q) {
signals: change send_signal/do_send_sigqueue to take "boolean group" parameter send_signal() is used either with ->pending or with ->signal->shared_pending. Change it to take "int group" instead, this argument will be re-used later. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:54 +00:00
list_add_tail(&q->list, &pending->list);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
switch ((unsigned long) info) {
[PATCH] remove hardcoded SEND_SIG_xxx constants This patch replaces hardcoded SEND_SIG_xxx constants with their symbolic names. No changes in affected .o files. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 23:03:44 +00:00
case (unsigned long) SEND_SIG_NOINFO:
signal: Ensure generic siginfos the kernel sends have all bits initialized Call clear_siginfo to ensure stack allocated siginfos are fully initialized before being passed to the signal sending functions. This ensures that if there is the kind of confusion documented by TRAP_FIXME, FPE_FIXME, or BUS_FIXME the kernel won't send unitialized data to userspace when the kernel generates a signal with SI_USER but the copy to userspace assumes it is a different kind of signal, and different fields are initialized. This also prepares the way for turning copy_siginfo_to_user into a copy_to_user, by removing the need in many cases to perform a field by field copy simply to skip the uninitialized fields. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-05 23:27:42 +00:00
clear_siginfo(&q->info);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
q->info.si_signo = sig;
q->info.si_errno = 0;
q->info.si_code = SI_USER;
SEND_SIG_NOINFO: set si_pid to tgid instead of pid POSIX requires the si_pid to be the process id of the sender, so ->si_pid should really be set to 'tgid'. This change does have following changes in behavior: - When sending pdeath_signal on re-parent to a sub-thread, ->si_pid cannot be used to identify the thread that did the re-parent since it will now show the tgid instead of thread id. - A multi-threaded application that expects to find the specific thread that encountered a SIGPIPE using the ->si_pid will now break. Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Acked-By: Roland McGrath <roland@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 22:42:46 +00:00
q->info.si_pid = task_tgid_nr_ns(current,
SEND_SIG_NOINFO: masquerade si_pid when crossing pid-ns boundary For SEND_SIG_NOINFO, si_pid is currently set to the pid of sender in sender's active pid namespace. But if the receiver is in a Eg: when parent sends the 'pdeath_signal' to a child that is in a descendant pid namespace, we should set si_pid 0. Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Acked-By: Roland McGrath <roland@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 22:42:45 +00:00
task_active_pid_ns(t));
signal: Correct namespace fixups of si_pid and si_uid The function send_signal was split from __send_signal so that it would be possible to bypass the namespace logic based upon current[1]. As it turns out the si_pid and the si_uid fixup are both inappropriate in the case of kill_pid_usb_asyncio so move that logic into send_signal. It is difficult to arrange but possible for a signal with an si_code of SI_TIMER or SI_SIGIO to be sent across namespace boundaries. In which case tests for when it is ok to change si_pid and si_uid based on SI_FROMUSER are incorrect. Replace the use of SI_FROMUSER with a new test has_si_pid_and_used based on siginfo_layout. Now that the uid fixup is no longer present after expanding SEND_SIG_NOINFO properly calculate the si_uid that the target task needs to read. [1] 7978b567d315 ("signals: add from_ancestor_ns parameter to send_signal()") Cc: stable@vger.kernel.org Fixes: 6588c1e3ff01 ("signals: SI_USER: Masquerade si_pid when crossing pid ns boundary") Fixes: 6b550f949594 ("user namespace: make signal.c respect user namespaces") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-16 03:54:56 +00:00
rcu_read_lock();
q->info.si_uid =
from_kuid_munged(task_cred_xxx(t, user_ns),
current_uid());
rcu_read_unlock();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
break;
[PATCH] remove hardcoded SEND_SIG_xxx constants This patch replaces hardcoded SEND_SIG_xxx constants with their symbolic names. No changes in affected .o files. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 23:03:44 +00:00
case (unsigned long) SEND_SIG_PRIV:
signal: Ensure generic siginfos the kernel sends have all bits initialized Call clear_siginfo to ensure stack allocated siginfos are fully initialized before being passed to the signal sending functions. This ensures that if there is the kind of confusion documented by TRAP_FIXME, FPE_FIXME, or BUS_FIXME the kernel won't send unitialized data to userspace when the kernel generates a signal with SI_USER but the copy to userspace assumes it is a different kind of signal, and different fields are initialized. This also prepares the way for turning copy_siginfo_to_user into a copy_to_user, by removing the need in many cases to perform a field by field copy simply to skip the uninitialized fields. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-05 23:27:42 +00:00
clear_siginfo(&q->info);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
q->info.si_signo = sig;
q->info.si_errno = 0;
q->info.si_code = SI_KERNEL;
q->info.si_pid = 0;
q->info.si_uid = 0;
break;
default:
copy_siginfo(&q->info, info);
break;
}
signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal Any time siginfo is not stored in the signal queue information is lost. Therefore set TRACE_SIGNAL_LOSE_INFO every time the code does not allocate a signal queue entry, and a queue overflow abort is not triggered. Fixes: ba005e1f4172 ("tracepoint: Add signal loss events") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-16 03:56:17 +00:00
} else if (!is_si_special(info) &&
sig >= SIGRTMIN && info->si_code != SI_USER) {
/*
* Queue overflow, abort. We may abort if the
* signal was rt and sent by user using something
* other than kill().
*/
result = TRACE_SIGNAL_OVERFLOW_FAIL;
ret = -EAGAIN;
goto ret;
} else {
/*
* This is a silent loss of information. We still
* send the signal, but the *info bits are lost.
*/
result = TRACE_SIGNAL_LOSE_INFO;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
out_set:
signals: send_signal: be paranoid about signalfd_notify() send_signal() shouldn't call signalfd_notify() if it then fails with -EAGAIN. Harmless, just a paranoid cleanup. Also remove the comment. It is obsolete, signalfd_notify() was simplified and does a simple wakeup. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: Davide Libenzi <davidel@xmailserver.org> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:53:00 +00:00
signalfd_notify(t, sig);
signals: change send_signal/do_send_sigqueue to take "boolean group" parameter send_signal() is used either with ->pending or with ->signal->shared_pending. Change it to take "int group" instead, this argument will be re-used later. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:54 +00:00
sigaddset(&pending->signal, sig);
signal: Don't restart fork when signals come in. Wen Yang <wen.yang99@zte.com.cn> and majiang <ma.jiang@zte.com.cn> report that a periodic signal received during fork can cause fork to continually restart preventing an application from making progress. The code was being overly pessimistic. Fork needs to guarantee that a signal sent to multiple processes is logically delivered before the fork and just to the forking process or logically delivered after the fork to both the forking process and it's newly spawned child. For signals like periodic timers that are always delivered to a single process fork can safely complete and let them appear to logically delivered after the fork(). While examining this issue I also discovered that fork today will miss signals delivered to multiple processes during the fork and handled by another thread. Similarly the current code will also miss blocked signals that are delivered to multiple process, as those signals will not appear pending during fork. Add a list of each thread that is currently forking, and keep on that list a signal set that records all of the signals sent to multiple processes. When fork completes initialize the new processes shared_pending signal set with it. The calculate_sigpending function will see those signals and set TIF_SIGPENDING causing the new task to take the slow path to userspace to handle those signals. Making it appear as if those signals were received immediately after the fork. It is not possible to send real time signals to multiple processes and exceptions don't go to multiple processes, which means that that are no signals sent to multiple processes that require siginfo. This means it is safe to not bother collecting siginfo on signals sent during fork. The sigaction of a child of fork is initially the same as the sigaction of the parent process. So a signal the parent ignores the child will also initially ignore. Therefore it is safe to ignore signals sent to multiple processes and ignored by the forking process. Signals sent to only a single process or only a single thread and delivered during fork are treated as if they are received after the fork, and generally not dealt with. They won't cause any problems. V2: Added removal from the multiprocess list on failure. V3: Use -ERESTARTNOINTR directly V4: - Don't queue both SIGCONT and SIGSTOP - Initialize signal_struct.multiprocess in init_task - Move setting of shared_pending to before the new task is visible to signals. This prevents signals from comming in before shared_pending.signal is set to delayed.signal and being lost. V5: - rework list add and delete to account for idle threads v6: - Use sigdelsetmask when removing stop signals Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200447 Reported-by: Wen Yang <wen.yang99@zte.com.cn> and Reported-by: majiang <ma.jiang@zte.com.cn> Fixes: 4a2c7a7837da ("[PATCH] make fork() atomic wrt pgrp/session signals") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-07-23 20:20:37 +00:00
/* Let multiprocess signals appear after on-going forks */
if (type > PIDTYPE_TGID) {
struct multiprocess_signals *delayed;
hlist_for_each_entry(delayed, &t->signal->multiprocess, node) {
sigset_t *signal = &delayed->signal;
/* Can't queue both a stop and a continue signal */
if (sig == SIGCONT)
sigdelsetmask(signal, SIG_KERNEL_STOP_MASK);
else if (sig_kernel_stop(sig))
sigdelset(signal, SIGCONT);
sigaddset(signal, sig);
}
}
signal: Push pid type down into complete_signal. This is the bottom and by pushing this down it simplifies the callers and otherwise leaves things as is. This is in preparation for allowing fork to implement better handling of signals set to groups of processes. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-07-14 02:39:13 +00:00
complete_signal(sig, t, type);
tracing: let trace_signal_generate() report more info, kill overflow_fail/lose_info __send_signal()->trace_signal_generate() doesn't report enough info. The users want to know was the signal actually delivered or not, and they also need the shared/private info. The patch moves trace_signal_generate() at the end of __send_signal() and adds the 2 additional arguments. This also allows us to kill trace_signal_overflow_fail/lose_info, we can simply add the appropriate TRACE_SIGNAL_ "result" codes. Reported-by: Seiji Aguchi <saguchi@redhat.com> Reviewed-by: Seiji Aguchi <seiji.aguchi@hds.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-11-22 20:13:48 +00:00
ret:
signal: Push pid type down into __send_signal This information is already available in the callers and by pushing it down it makes the code a little clearer, and allows implementing better handling of signales set to a group of processes in fork. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-07-14 00:26:27 +00:00
trace_signal_generate(sig, info, t, type != PIDTYPE_PID, result);
tracing: let trace_signal_generate() report more info, kill overflow_fail/lose_info __send_signal()->trace_signal_generate() doesn't report enough info. The users want to know was the signal actually delivered or not, and they also need the shared/private info. The patch moves trace_signal_generate() at the end of __send_signal() and adds the 2 additional arguments. This also allows us to kill trace_signal_overflow_fail/lose_info, we can simply add the appropriate TRACE_SIGNAL_ "result" codes. Reported-by: Seiji Aguchi <saguchi@redhat.com> Reviewed-by: Seiji Aguchi <seiji.aguchi@hds.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-11-22 20:13:48 +00:00
return ret;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
signal: Correct namespace fixups of si_pid and si_uid The function send_signal was split from __send_signal so that it would be possible to bypass the namespace logic based upon current[1]. As it turns out the si_pid and the si_uid fixup are both inappropriate in the case of kill_pid_usb_asyncio so move that logic into send_signal. It is difficult to arrange but possible for a signal with an si_code of SI_TIMER or SI_SIGIO to be sent across namespace boundaries. In which case tests for when it is ok to change si_pid and si_uid based on SI_FROMUSER are incorrect. Replace the use of SI_FROMUSER with a new test has_si_pid_and_used based on siginfo_layout. Now that the uid fixup is no longer present after expanding SEND_SIG_NOINFO properly calculate the si_uid that the target task needs to read. [1] 7978b567d315 ("signals: add from_ancestor_ns parameter to send_signal()") Cc: stable@vger.kernel.org Fixes: 6588c1e3ff01 ("signals: SI_USER: Masquerade si_pid when crossing pid ns boundary") Fixes: 6b550f949594 ("user namespace: make signal.c respect user namespaces") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-16 03:54:56 +00:00
static inline bool has_si_pid_and_uid(struct kernel_siginfo *info)
{
bool ret = false;
switch (siginfo_layout(info->si_signo, info->si_code)) {
case SIL_KILL:
case SIL_CHLD:
case SIL_RT:
ret = true;
break;
case SIL_TIMER:
case SIL_POLL:
case SIL_FAULT:
case SIL_FAULT_MCEERR:
case SIL_FAULT_BNDERR:
case SIL_FAULT_PKUERR:
case SIL_SYS:
ret = false;
break;
}
return ret;
}
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
static int send_signal(int sig, struct kernel_siginfo *info, struct task_struct *t,
signal: Push pid type down into send_signal This information is already available in the callers and by pushing it down it makes the code a little clearer, and allows better group signal behavior in fork. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-07-20 20:49:17 +00:00
enum pid_type type)
signals: add from_ancestor_ns parameter to send_signal() send_signal() (or its helper) needs to determine the pid namespace of the sender. But a signal sent via kill_pid_info_as_uid() comes from within the kernel and send_signal() does not need to determine the pid namespace of the sender. So define a helper for send_signal() which takes an additional parameter, 'from_ancestor_ns' and have kill_pid_info_as_uid() use that helper directly. The 'from_ancestor_ns' parameter will be used in a follow-on patch. Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Daniel Lezcano <daniel.lezcano@free.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 23:58:04 +00:00
{
signal: Move the computation of force into send_signal and correct it. Forcing a signal or not allowing a pid namespace init to ignore SIGKILL or SIGSTOP is more cleanly computed in send_signal. There are two cases where we don't allow a pid namespace init to ignore SIGKILL or SIGSTOP. If the sending process is from an ancestor pid namespace and as such is effectively the god to the target process, and if the it is the kernel that is sending the signal, not another application. It is known that a process is from an ancestor pid namespace if it can see it's target but it's target does not have a pid for the sender in it's pid namespace. It is know that a signal is sent from the kernel if si_code is set to SI_KERNEL or info is SEND_SIG_PRIV (which ultimately generates a signal with si_code == SI_KERNEL). The only signals that matter are SIGKILL and SIGSTOP neither of which can really be caught, and both of which always have a siginfo layout that includes si_uid and si_pid. Therefore we never need to worry about forcing a signal when si_pid and si_uid are absent. So handle the two special cases of info and the case when si_pid and si_uid are present. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-16 03:23:32 +00:00
/* Should SIGKILL or SIGSTOP be received by a pid namespace init? */
bool force = false;
signals: protect cinit from unblocked SIG_DFL signals Drop early any SIG_DFL or SIG_IGN signals to container-init from within the same container. But queue SIGSTOP and SIGKILL to the container-init if they are from an ancestor container. Blocked, fatal signals (i.e when SIG_DFL is to terminate) from within the container can still terminate the container-init. That will be addressed in the next patch. Note: To be bisect-safe, SIGNAL_UNKILLABLE will be set for container-inits in a follow-on patch. Until then, this patch is just a preparatory step. Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Daniel Lezcano <daniel.lezcano@free.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 23:58:05 +00:00
signal: Move the computation of force into send_signal and correct it. Forcing a signal or not allowing a pid namespace init to ignore SIGKILL or SIGSTOP is more cleanly computed in send_signal. There are two cases where we don't allow a pid namespace init to ignore SIGKILL or SIGSTOP. If the sending process is from an ancestor pid namespace and as such is effectively the god to the target process, and if the it is the kernel that is sending the signal, not another application. It is known that a process is from an ancestor pid namespace if it can see it's target but it's target does not have a pid for the sender in it's pid namespace. It is know that a signal is sent from the kernel if si_code is set to SI_KERNEL or info is SEND_SIG_PRIV (which ultimately generates a signal with si_code == SI_KERNEL). The only signals that matter are SIGKILL and SIGSTOP neither of which can really be caught, and both of which always have a siginfo layout that includes si_uid and si_pid. Therefore we never need to worry about forcing a signal when si_pid and si_uid are absent. So handle the two special cases of info and the case when si_pid and si_uid are present. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-16 03:23:32 +00:00
if (info == SEND_SIG_NOINFO) {
/* Force if sent from an ancestor pid namespace */
force = !task_pid_nr_ns(current, task_active_pid_ns(t));
} else if (info == SEND_SIG_PRIV) {
/* Don't ignore kernel generated signals */
force = true;
} else if (has_si_pid_and_uid(info)) {
/* SIGKILL and SIGSTOP is special or has ids */
signal: Correct namespace fixups of si_pid and si_uid The function send_signal was split from __send_signal so that it would be possible to bypass the namespace logic based upon current[1]. As it turns out the si_pid and the si_uid fixup are both inappropriate in the case of kill_pid_usb_asyncio so move that logic into send_signal. It is difficult to arrange but possible for a signal with an si_code of SI_TIMER or SI_SIGIO to be sent across namespace boundaries. In which case tests for when it is ok to change si_pid and si_uid based on SI_FROMUSER are incorrect. Replace the use of SI_FROMUSER with a new test has_si_pid_and_used based on siginfo_layout. Now that the uid fixup is no longer present after expanding SEND_SIG_NOINFO properly calculate the si_uid that the target task needs to read. [1] 7978b567d315 ("signals: add from_ancestor_ns parameter to send_signal()") Cc: stable@vger.kernel.org Fixes: 6588c1e3ff01 ("signals: SI_USER: Masquerade si_pid when crossing pid ns boundary") Fixes: 6b550f949594 ("user namespace: make signal.c respect user namespaces") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-16 03:54:56 +00:00
struct user_namespace *t_user_ns;
rcu_read_lock();
t_user_ns = task_cred_xxx(t, user_ns);
if (current_user_ns() != t_user_ns) {
kuid_t uid = make_kuid(current_user_ns(), info->si_uid);
info->si_uid = from_kuid_munged(t_user_ns, uid);
}
rcu_read_unlock();
signals: protect cinit from unblocked SIG_DFL signals Drop early any SIG_DFL or SIG_IGN signals to container-init from within the same container. But queue SIGSTOP and SIGKILL to the container-init if they are from an ancestor container. Blocked, fatal signals (i.e when SIG_DFL is to terminate) from within the container can still terminate the container-init. That will be addressed in the next patch. Note: To be bisect-safe, SIGNAL_UNKILLABLE will be set for container-inits in a follow-on patch. Until then, this patch is just a preparatory step. Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Daniel Lezcano <daniel.lezcano@free.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 23:58:05 +00:00
signal: Move the computation of force into send_signal and correct it. Forcing a signal or not allowing a pid namespace init to ignore SIGKILL or SIGSTOP is more cleanly computed in send_signal. There are two cases where we don't allow a pid namespace init to ignore SIGKILL or SIGSTOP. If the sending process is from an ancestor pid namespace and as such is effectively the god to the target process, and if the it is the kernel that is sending the signal, not another application. It is known that a process is from an ancestor pid namespace if it can see it's target but it's target does not have a pid for the sender in it's pid namespace. It is know that a signal is sent from the kernel if si_code is set to SI_KERNEL or info is SEND_SIG_PRIV (which ultimately generates a signal with si_code == SI_KERNEL). The only signals that matter are SIGKILL and SIGSTOP neither of which can really be caught, and both of which always have a siginfo layout that includes si_uid and si_pid. Therefore we never need to worry about forcing a signal when si_pid and si_uid are absent. So handle the two special cases of info and the case when si_pid and si_uid are present. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-16 03:23:32 +00:00
/* A kernel generated signal? */
force = (info->si_code == SI_KERNEL);
/* From an ancestor pid namespace? */
if (!task_pid_nr_ns(current, task_active_pid_ns(t))) {
signal: Correct namespace fixups of si_pid and si_uid The function send_signal was split from __send_signal so that it would be possible to bypass the namespace logic based upon current[1]. As it turns out the si_pid and the si_uid fixup are both inappropriate in the case of kill_pid_usb_asyncio so move that logic into send_signal. It is difficult to arrange but possible for a signal with an si_code of SI_TIMER or SI_SIGIO to be sent across namespace boundaries. In which case tests for when it is ok to change si_pid and si_uid based on SI_FROMUSER are incorrect. Replace the use of SI_FROMUSER with a new test has_si_pid_and_used based on siginfo_layout. Now that the uid fixup is no longer present after expanding SEND_SIG_NOINFO properly calculate the si_uid that the target task needs to read. [1] 7978b567d315 ("signals: add from_ancestor_ns parameter to send_signal()") Cc: stable@vger.kernel.org Fixes: 6588c1e3ff01 ("signals: SI_USER: Masquerade si_pid when crossing pid ns boundary") Fixes: 6b550f949594 ("user namespace: make signal.c respect user namespaces") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-16 03:54:56 +00:00
info->si_pid = 0;
signal: Move the computation of force into send_signal and correct it. Forcing a signal or not allowing a pid namespace init to ignore SIGKILL or SIGSTOP is more cleanly computed in send_signal. There are two cases where we don't allow a pid namespace init to ignore SIGKILL or SIGSTOP. If the sending process is from an ancestor pid namespace and as such is effectively the god to the target process, and if the it is the kernel that is sending the signal, not another application. It is known that a process is from an ancestor pid namespace if it can see it's target but it's target does not have a pid for the sender in it's pid namespace. It is know that a signal is sent from the kernel if si_code is set to SI_KERNEL or info is SEND_SIG_PRIV (which ultimately generates a signal with si_code == SI_KERNEL). The only signals that matter are SIGKILL and SIGSTOP neither of which can really be caught, and both of which always have a siginfo layout that includes si_uid and si_pid. Therefore we never need to worry about forcing a signal when si_pid and si_uid are absent. So handle the two special cases of info and the case when si_pid and si_uid are present. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-16 03:23:32 +00:00
force = true;
}
signal: Correct namespace fixups of si_pid and si_uid The function send_signal was split from __send_signal so that it would be possible to bypass the namespace logic based upon current[1]. As it turns out the si_pid and the si_uid fixup are both inappropriate in the case of kill_pid_usb_asyncio so move that logic into send_signal. It is difficult to arrange but possible for a signal with an si_code of SI_TIMER or SI_SIGIO to be sent across namespace boundaries. In which case tests for when it is ok to change si_pid and si_uid based on SI_FROMUSER are incorrect. Replace the use of SI_FROMUSER with a new test has_si_pid_and_used based on siginfo_layout. Now that the uid fixup is no longer present after expanding SEND_SIG_NOINFO properly calculate the si_uid that the target task needs to read. [1] 7978b567d315 ("signals: add from_ancestor_ns parameter to send_signal()") Cc: stable@vger.kernel.org Fixes: 6588c1e3ff01 ("signals: SI_USER: Masquerade si_pid when crossing pid ns boundary") Fixes: 6b550f949594 ("user namespace: make signal.c respect user namespaces") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-16 03:54:56 +00:00
}
signal: Move the computation of force into send_signal and correct it. Forcing a signal or not allowing a pid namespace init to ignore SIGKILL or SIGSTOP is more cleanly computed in send_signal. There are two cases where we don't allow a pid namespace init to ignore SIGKILL or SIGSTOP. If the sending process is from an ancestor pid namespace and as such is effectively the god to the target process, and if the it is the kernel that is sending the signal, not another application. It is known that a process is from an ancestor pid namespace if it can see it's target but it's target does not have a pid for the sender in it's pid namespace. It is know that a signal is sent from the kernel if si_code is set to SI_KERNEL or info is SEND_SIG_PRIV (which ultimately generates a signal with si_code == SI_KERNEL). The only signals that matter are SIGKILL and SIGSTOP neither of which can really be caught, and both of which always have a siginfo layout that includes si_uid and si_pid. Therefore we never need to worry about forcing a signal when si_pid and si_uid are absent. So handle the two special cases of info and the case when si_pid and si_uid are present. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-16 03:23:32 +00:00
return __send_signal(sig, info, t, type, force);
signals: add from_ancestor_ns parameter to send_signal() send_signal() (or its helper) needs to determine the pid namespace of the sender. But a signal sent via kill_pid_info_as_uid() comes from within the kernel and send_signal() does not need to determine the pid namespace of the sender. So define a helper for send_signal() which takes an additional parameter, 'from_ancestor_ns' and have kill_pid_info_as_uid() use that helper directly. The 'from_ancestor_ns' parameter will be used in a follow-on patch. Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Daniel Lezcano <daniel.lezcano@free.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 23:58:04 +00:00
}
print_fatal_signal(): get rid of pt_regs argument Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-05 18:09:56 +00:00
static void print_fatal_signal(int signr)
vdso: print fatal signals Add the print-fatal-signals=1 boot option and the /proc/sys/kernel/print-fatal-signals runtime switch. This feature prints some minimal information about userspace segfaults to the kernel console. This is useful to find early bootup bugs where userspace debugging is very hard. Defaults to off. [akpm@linux-foundation.org: Don't add new sysctl numbers] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 06:40:10 +00:00
{
print_fatal_signal(): get rid of pt_regs argument Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-05 18:09:56 +00:00
struct pt_regs *regs = signal_pt_regs();
kernel/signal.c: convert printk(KERN_<LEVEL> ...) to pr_<level>(...) Use pr_<level> instead of printk(KERN_<LEVEL> ). Signed-off-by: Wang Xiaoqiang <wangxq10@lzu.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-23 23:23:59 +00:00
pr_info("potentially unexpected fatal signal %d.\n", signr);
vdso: print fatal signals Add the print-fatal-signals=1 boot option and the /proc/sys/kernel/print-fatal-signals runtime switch. This feature prints some minimal information about userspace segfaults to the kernel console. This is useful to find early bootup bugs where userspace debugging is very hard. Defaults to off. [akpm@linux-foundation.org: Don't add new sysctl numbers] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 06:40:10 +00:00
x86 merge fallout: uml Don't undef __i386__/__x86_64__ in uml anymore, make sure that (few) places that required adjusting the ifdefs got those. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-29 04:31:16 +00:00
#if defined(__i386__) && !defined(__arch_um__)
kernel/signal.c: convert printk(KERN_<LEVEL> ...) to pr_<level>(...) Use pr_<level> instead of printk(KERN_<LEVEL> ). Signed-off-by: Wang Xiaoqiang <wangxq10@lzu.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-23 23:23:59 +00:00
pr_info("code at %08lx: ", regs->ip);
vdso: print fatal signals Add the print-fatal-signals=1 boot option and the /proc/sys/kernel/print-fatal-signals runtime switch. This feature prints some minimal information about userspace segfaults to the kernel console. This is useful to find early bootup bugs where userspace debugging is very hard. Defaults to off. [akpm@linux-foundation.org: Don't add new sysctl numbers] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 06:40:10 +00:00
{
int i;
for (i = 0; i < 16; i++) {
unsigned char insn;
kernel/signal.c: fix kernel information leak with print-fatal-signals=1 When print-fatal-signals is enabled it's possible to dump any memory reachable by the kernel to the log by simply jumping to that address from user space. Or crash the system if there's some hardware with read side effects. The fatal signals handler will dump 16 bytes at the execution address, which is fully controlled by ring 3. In addition when something jumps to a unmapped address there will be up to 16 additional useless page faults, which might be potentially slow (and at least is not very efficient) Fortunately this option is off by default and only there on i386. But fix it by checking for kernel addresses and also stopping when there's a page fault. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Oleg Nesterov <oleg@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-08 22:42:52 +00:00
if (get_user(insn, (unsigned char *)(regs->ip + i)))
break;
kernel/signal.c: convert printk(KERN_<LEVEL> ...) to pr_<level>(...) Use pr_<level> instead of printk(KERN_<LEVEL> ). Signed-off-by: Wang Xiaoqiang <wangxq10@lzu.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-23 23:23:59 +00:00
pr_cont("%02x ", insn);
vdso: print fatal signals Add the print-fatal-signals=1 boot option and the /proc/sys/kernel/print-fatal-signals runtime switch. This feature prints some minimal information about userspace segfaults to the kernel console. This is useful to find early bootup bugs where userspace debugging is very hard. Defaults to off. [akpm@linux-foundation.org: Don't add new sysctl numbers] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 06:40:10 +00:00
}
}
kernel/signal.c: convert printk(KERN_<LEVEL> ...) to pr_<level>(...) Use pr_<level> instead of printk(KERN_<LEVEL> ). Signed-off-by: Wang Xiaoqiang <wangxq10@lzu.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-23 23:23:59 +00:00
pr_cont("\n");
vdso: print fatal signals Add the print-fatal-signals=1 boot option and the /proc/sys/kernel/print-fatal-signals runtime switch. This feature prints some minimal information about userspace segfaults to the kernel console. This is useful to find early bootup bugs where userspace debugging is very hard. Defaults to off. [akpm@linux-foundation.org: Don't add new sysctl numbers] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 06:40:10 +00:00
#endif
signals, debug: fix BUG: using smp_processor_id() in preemptible code in print_fatal_signal() With print-fatal-signals=1 on a kernel with CONFIG_PREEMPT=y, sending an unexpected signal to a process causes a BUG: using smp_processor_id() in preemptible code. get_signal_to_deliver() releases the siglock before calling print_fatal_signal(), which calls show_regs(), which calls smp_processor_id(), which is not supposed to be called from a preemptible thread. Make sure show_regs() runs with preemption disabled. Signed-off-by: Ed Swierk <eswierk@aristanetworks.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-26 23:33:31 +00:00
preempt_disable();
vdso: print fatal signals Add the print-fatal-signals=1 boot option and the /proc/sys/kernel/print-fatal-signals runtime switch. This feature prints some minimal information about userspace segfaults to the kernel console. This is useful to find early bootup bugs where userspace debugging is very hard. Defaults to off. [akpm@linux-foundation.org: Don't add new sysctl numbers] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 06:40:10 +00:00
show_regs(regs);
signals, debug: fix BUG: using smp_processor_id() in preemptible code in print_fatal_signal() With print-fatal-signals=1 on a kernel with CONFIG_PREEMPT=y, sending an unexpected signal to a process causes a BUG: using smp_processor_id() in preemptible code. get_signal_to_deliver() releases the siglock before calling print_fatal_signal(), which calls show_regs(), which calls smp_processor_id(), which is not supposed to be called from a preemptible thread. Make sure show_regs() runs with preemption disabled. Signed-off-by: Ed Swierk <eswierk@aristanetworks.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-26 23:33:31 +00:00
preempt_enable();
vdso: print fatal signals Add the print-fatal-signals=1 boot option and the /proc/sys/kernel/print-fatal-signals runtime switch. This feature prints some minimal information about userspace segfaults to the kernel console. This is useful to find early bootup bugs where userspace debugging is very hard. Defaults to off. [akpm@linux-foundation.org: Don't add new sysctl numbers] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 06:40:10 +00:00
}
static int __init setup_print_fatal_signals(char *str)
{
get_option (&str, &print_fatal_signals);
return 1;
}
__setup("print-fatal-signals=", setup_print_fatal_signals);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
signals: fold complete_signal() into send_signal/do_send_sigqueue Factor out complete_signal() callsites. This change completely unifies the helpers sending the specific/group signals. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:55 +00:00
int
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
__group_send_sig_info(int sig, struct kernel_siginfo *info, struct task_struct *p)
signals: fold complete_signal() into send_signal/do_send_sigqueue Factor out complete_signal() callsites. This change completely unifies the helpers sending the specific/group signals. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:55 +00:00
{
signal: Push pid type down into send_signal This information is already available in the callers and by pushing it down it makes the code a little clearer, and allows better group signal behavior in fork. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-07-20 20:49:17 +00:00
return send_signal(sig, info, p, PIDTYPE_TGID);
signals: fold complete_signal() into send_signal/do_send_sigqueue Factor out complete_signal() callsites. This change completely unifies the helpers sending the specific/group signals. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:55 +00:00
}
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
int do_send_sig_info(int sig, struct kernel_siginfo *info, struct task_struct *p,
signal: Pass pid type into do_send_sig_info This passes the information we already have at the call sight into do_send_sig_info. Ultimately allowing for better handling of signals sent to a group of processes during fork. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-07-21 15:45:15 +00:00
enum pid_type type)
signals: introduce do_send_sig_info() helper Introduce do_send_sig_info() and convert group_send_sig_info(), send_sig_info(), do_send_specific() to use this helper. Hopefully it will have more users soon, it allows to specify specific/group behaviour via "bool group" argument. Shaves 80 bytes from .text. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: stephane eranian <eranian@googlemail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 22:57:00 +00:00
{
unsigned long flags;
int ret = -ESRCH;
if (lock_task_sighand(p, &flags)) {
signal: Push pid type down into send_signal This information is already available in the callers and by pushing it down it makes the code a little clearer, and allows better group signal behavior in fork. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-07-20 20:49:17 +00:00
ret = send_signal(sig, info, p, type);
signals: introduce do_send_sig_info() helper Introduce do_send_sig_info() and convert group_send_sig_info(), send_sig_info(), do_send_specific() to use this helper. Hopefully it will have more users soon, it allows to specify specific/group behaviour via "bool group" argument. Shaves 80 bytes from .text. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: stephane eranian <eranian@googlemail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 22:57:00 +00:00
unlock_task_sighand(p, &flags);
}
return ret;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* Force a signal that the process can't ignore: if necessary
* we unblock the signal and change any SIG_IGN to SIG_DFL.
Fix force_sig_info() semantics after cleanups Suresh points out that commit b0423a0d9cc836b2c3d796623cd19236bfedfe63 broke the semantics of a synchronous signal like SIGSEGV occurring recursively inside its own handler handler (or, indeed, any other context when the signal was blocked). That was unintentional, and this fixes things up by reinstating the old semantics, but without reverting the cleanups. Cc: Paul E. McKenney <paulmck@us.ibm.com> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-03 03:17:49 +00:00
*
* Note: If we unblock the signal, we always reset it to SIG_DFL,
* since we do not want to have a signal handler that was blocked
* be invoked when user space had explicitly blocked it.
*
signals: allow the kernel to actually kill /sbin/init Currently the buggy /sbin/init hangs if SIGSEGV/etc happens. The kernel sends the signal, init dequeues it and ignores, returns from the exception, repeats the faulting instruction, and so on forever. Imho, such a behaviour is not good. I think that the explicit loud death of the buggy /sbin/init is better than the silent hang. Change force_sig_info() to clear SIGNAL_UNKILLABLE when the task should be really killed. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:53:05 +00:00
* We don't want to have recursive SIGSEGV's etc, for example,
* that is why we also clear SIGNAL_UNKILLABLE.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
signal: Factor force_sig_info_to_task out of force_sig_info All callers of force_sig_info pass info.si_signo in for the signal by definition as well as in practice. Further all callers of force_sig_info except force_sig_fault_to_task pass current as the target task to force_sig_info. Factor out a static force_sig_info_to_task that force_sig_fault_to_task can call. This prepares the way for force_sig_info to have it's task and signal parameters removed. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-02-07 17:01:20 +00:00
static int
force_sig_info_to_task(struct kernel_siginfo *info, struct task_struct *t)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
unsigned long int flags;
Fix force_sig_info() semantics after cleanups Suresh points out that commit b0423a0d9cc836b2c3d796623cd19236bfedfe63 broke the semantics of a synchronous signal like SIGSEGV occurring recursively inside its own handler handler (or, indeed, any other context when the signal was blocked). That was unintentional, and this fixes things up by reinstating the old semantics, but without reverting the cleanups. Cc: Paul E. McKenney <paulmck@us.ibm.com> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-03 03:17:49 +00:00
int ret, blocked, ignored;
struct k_sigaction *action;
signal: Factor force_sig_info_to_task out of force_sig_info All callers of force_sig_info pass info.si_signo in for the signal by definition as well as in practice. Further all callers of force_sig_info except force_sig_fault_to_task pass current as the target task to force_sig_info. Factor out a static force_sig_info_to_task that force_sig_fault_to_task can call. This prepares the way for force_sig_info to have it's task and signal parameters removed. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-02-07 17:01:20 +00:00
int sig = info->si_signo;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
spin_lock_irqsave(&t->sighand->siglock, flags);
Fix force_sig_info() semantics after cleanups Suresh points out that commit b0423a0d9cc836b2c3d796623cd19236bfedfe63 broke the semantics of a synchronous signal like SIGSEGV occurring recursively inside its own handler handler (or, indeed, any other context when the signal was blocked). That was unintentional, and this fixes things up by reinstating the old semantics, but without reverting the cleanups. Cc: Paul E. McKenney <paulmck@us.ibm.com> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-03 03:17:49 +00:00
action = &t->sighand->action[sig-1];
ignored = action->sa.sa_handler == SIG_IGN;
blocked = sigismember(&t->blocked, sig);
if (blocked || ignored) {
action->sa.sa_handler = SIG_DFL;
if (blocked) {
sigdelset(&t->blocked, sig);
recalc_sigpending_tsk fixes Steve Hawkes discovered a problem where recalc_sigpending_tsk was called in do_sigaction but no signal_wake_up call was made, preventing later signals from waking up blocked threads with TIF_SIGPENDING already set. In fact, the few other calls to recalc_sigpending_tsk outside the signals code are also subject to this problem in other race conditions. This change makes recalc_sigpending_tsk private to the signals code. It changes the outside calls, as well as do_sigaction, to use the new recalc_sigpending_and_wake instead. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: <Steve.Hawkes@motorola.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-23 20:57:44 +00:00
recalc_sigpending_and_wake(t);
Fix force_sig_info() semantics after cleanups Suresh points out that commit b0423a0d9cc836b2c3d796623cd19236bfedfe63 broke the semantics of a synchronous signal like SIGSEGV occurring recursively inside its own handler handler (or, indeed, any other context when the signal was blocked). That was unintentional, and this fixes things up by reinstating the old semantics, but without reverting the cleanups. Cc: Paul E. McKenney <paulmck@us.ibm.com> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-03 03:17:49 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
signal: don't remove SIGNAL_UNKILLABLE for traced tasks. When forcing a signal, SIGNAL_UNKILLABLE is removed to prevent recursive faults, but this is undesirable when tracing. For example, debugging an init process (whether global or namespace), hitting a breakpoint and SIGTRAP will force SIGTRAP and then remove SIGNAL_UNKILLABLE. Everything continues fine, but then once debugging has finished, the init process is left killable which is unlikely what the user expects, resulting in either an accidentally killed init or an init that stops reaping zombies. Link: http://lkml.kernel.org/r/20170815112806.10728-1-jamie.iles@oracle.com Signed-off-by: Jamie Iles <jamie.iles@oracle.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-18 22:16:18 +00:00
/*
* Don't clear SIGNAL_UNKILLABLE for traced tasks, users won't expect
* debugging to leave init killable.
*/
if (action->sa.sa_handler == SIG_DFL && !t->ptrace)
signals: allow the kernel to actually kill /sbin/init Currently the buggy /sbin/init hangs if SIGSEGV/etc happens. The kernel sends the signal, init dequeues it and ignores, returns from the exception, repeats the faulting instruction, and so on forever. Imho, such a behaviour is not good. I think that the explicit loud death of the buggy /sbin/init is better than the silent hang. Change force_sig_info() to clear SIGNAL_UNKILLABLE when the task should be really killed. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:53:05 +00:00
t->signal->flags &= ~SIGNAL_UNKILLABLE;
signal: Remove specific_send_sig_info This function is static and it only has two callers. As specific_send_sig_info is only called twice remembering what specific_send_sig_info does when reading the code is difficutl and it makes it hard to see which sending sending functions are equivalent to which others. So remove specific_send_sig_info to make the code easier to read. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-07-21 16:34:03 +00:00
ret = send_signal(sig, info, t, PIDTYPE_PID);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
spin_unlock_irqrestore(&t->sighand->siglock, flags);
return ret;
}
signal: Remove the signal number and task parameters from force_sig_info force_sig_info always delivers to the current task and the signal parameter always matches info.si_signo. So remove those parameters to make it a simpler less error prone interface, and to make it clear that none of the callers are doing anything clever. This guarantees that force_sig_info will not grow any new buggy callers that attempt to call force_sig on a non-current task, or that pass an signal number that does not match info.si_signo. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-15 15:11:09 +00:00
int force_sig_info(struct kernel_siginfo *info)
signal: Factor force_sig_info_to_task out of force_sig_info All callers of force_sig_info pass info.si_signo in for the signal by definition as well as in practice. Further all callers of force_sig_info except force_sig_fault_to_task pass current as the target task to force_sig_info. Factor out a static force_sig_info_to_task that force_sig_fault_to_task can call. This prepares the way for force_sig_info to have it's task and signal parameters removed. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-02-07 17:01:20 +00:00
{
signal: Remove the signal number and task parameters from force_sig_info force_sig_info always delivers to the current task and the signal parameter always matches info.si_signo. So remove those parameters to make it a simpler less error prone interface, and to make it clear that none of the callers are doing anything clever. This guarantees that force_sig_info will not grow any new buggy callers that attempt to call force_sig on a non-current task, or that pass an signal number that does not match info.si_signo. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-15 15:11:09 +00:00
return force_sig_info_to_task(info, current);
signal: Factor force_sig_info_to_task out of force_sig_info All callers of force_sig_info pass info.si_signo in for the signal by definition as well as in practice. Further all callers of force_sig_info except force_sig_fault_to_task pass current as the target task to force_sig_info. Factor out a static force_sig_info_to_task that force_sig_fault_to_task can call. This prepares the way for force_sig_info to have it's task and signal parameters removed. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-02-07 17:01:20 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* Nuke all other threads in the group.
*/
exit: change zap_other_threads() to count sub-threads Change zap_other_threads() to return the number of other sub-threads found on ->thread_group list. Other changes are cosmetic: - change the code to use while_each_thread() helper - remove the obsolete comment about SIGKILL/SIGSTOP Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Roland McGrath <roland@redhat.com> Cc: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-26 21:43:11 +00:00
int zap_other_threads(struct task_struct *p)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
exit: change zap_other_threads() to count sub-threads Change zap_other_threads() to return the number of other sub-threads found on ->thread_group list. Other changes are cosmetic: - change the code to use while_each_thread() helper - remove the obsolete comment about SIGKILL/SIGSTOP Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Roland McGrath <roland@redhat.com> Cc: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-26 21:43:11 +00:00
struct task_struct *t = p;
int count = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
p->signal->group_stop_count = 0;
exit: change zap_other_threads() to count sub-threads Change zap_other_threads() to return the number of other sub-threads found on ->thread_group list. Other changes are cosmetic: - change the code to use while_each_thread() helper - remove the obsolete comment about SIGKILL/SIGSTOP Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Roland McGrath <roland@redhat.com> Cc: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-26 21:43:11 +00:00
while_each_thread(p, t) {
job control: make task_clear_jobctl_pending() clear TRAPPING automatically JOBCTL_TRAPPING indicates that ptracer is waiting for tracee to (re)transit into TRACED. task_clear_jobctl_pending() must be called when either tracee enters TRACED or the transition is cancelled for some reason. The former is achieved by explicitly calling task_clear_jobctl_pending() in ptrace_stop() and the latter by calling it at the end of do_signal_stop(). Calling task_clear_jobctl_trapping() at the end of do_signal_stop() limits the scope TRAPPING can be used and is fragile in that seemingly unrelated changes to tracee's control flow can lead to stuck TRAPPING. We already have task_clear_jobctl_pending() calls on those cancelling events to clear JOBCTL_STOP_PENDING. Cancellations can be handled by making those call sites use JOBCTL_PENDING_MASK instead and updating task_clear_jobctl_pending() such that task_clear_jobctl_trapping() is called automatically if no stop/trap is pending. This patch makes the above changes and removes the fallback task_clear_jobctl_trapping() call from do_signal_stop(). Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-02 09:14:00 +00:00
task_clear_jobctl_pending(t, JOBCTL_PENDING_MASK);
exit: change zap_other_threads() to count sub-threads Change zap_other_threads() to return the number of other sub-threads found on ->thread_group list. Other changes are cosmetic: - change the code to use while_each_thread() helper - remove the obsolete comment about SIGKILL/SIGSTOP Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Roland McGrath <roland@redhat.com> Cc: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-26 21:43:11 +00:00
count++;
/* Don't bother with already dead threads */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (t->exit_state)
continue;
sigaddset(&t->pending.signal, SIGKILL);
signal_wake_up(t, 1);
}
exit: change zap_other_threads() to count sub-threads Change zap_other_threads() to return the number of other sub-threads found on ->thread_group list. Other changes are cosmetic: - change the code to use while_each_thread() helper - remove the obsolete comment about SIGKILL/SIGSTOP Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Roland McGrath <roland@redhat.com> Cc: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-26 21:43:11 +00:00
return count;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
signals: annotate lock_task_sighand() lock_task_sighand() grabs sighand->siglock in case of returning non-NULL but unlock_task_sighand() releases it unconditionally. This leads sparse to complain about the lock context imbalance. Rename and wrap lock_task_sighand() using __cond_lock() macro to make sparse happy. Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Namhyung Kim <namhyung@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 22:34:06 +00:00
struct sighand_struct *__lock_task_sighand(struct task_struct *tsk,
unsigned long *flags)
[PATCH] introduce lock_task_sighand() helper Add lock_task_sighand() helper and converts group_send_sig_info() to use it. Hopefully we will have more users soon. This patch also removes '!sighand->count' and '!p->usage' checks, I think they both are bogus, racy and unneeded (but probably it makes sense to restore them as BUG_ON()s). ->sighand is cleared and it's ->count is decremented in release_task() with sighand->siglock held, so it is a bug to have '!p->usage || !->count' after we already locked and verified it is the same. On the other hand, an already dead task without ->sighand can have a non-zero ->usage due to ptrace, for example. If we read the stale value of ->sighand we must see the change after spin_lock(), because that change was done while holding that same old ->sighand.siglock. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-29 00:11:13 +00:00
{
struct sighand_struct *sighand;
signal: Remove no longer required irqsave/restore Commit a841796f11c9 ("signal: align __lock_task_sighand() irq disabling and RCU") introduced a rcu read side critical section with interrupts disabled. The changelog suggested that a better long-term fix would be "to make rt_mutex_unlock() disable irqs when acquiring the rt_mutex structure's ->wait_lock". This long-term fix has been made in commit b4abf91047cf ("rtmutex: Make wait_lock irq safe") for a different reason. Therefore revert commit a841796f11c9 ("signal: align > __lock_task_sighand() irq disabling and RCU") as the interrupt disable dance is not longer required. The change was tested on the base of b4abf91047cf ("rtmutex: Make wait_lock irq safe") with a four hour run of rcutorture scenario TREE03 with lockdep enabled as suggested by Paul McKenney. Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: bigeasy@linutronix.de Link: https://lkml.kernel.org/r/20180525090507.22248-3-anna-maria@linutronix.de
2018-05-25 09:05:07 +00:00
rcu_read_lock();
[PATCH] introduce lock_task_sighand() helper Add lock_task_sighand() helper and converts group_send_sig_info() to use it. Hopefully we will have more users soon. This patch also removes '!sighand->count' and '!p->usage' checks, I think they both are bogus, racy and unneeded (but probably it makes sense to restore them as BUG_ON()s). ->sighand is cleared and it's ->count is decremented in release_task() with sighand->siglock held, so it is a bug to have '!p->usage || !->count' after we already locked and verified it is the same. On the other hand, an already dead task without ->sighand can have a non-zero ->usage due to ptrace, for example. If we read the stale value of ->sighand we must see the change after spin_lock(), because that change was done while holding that same old ->sighand.siglock. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-29 00:11:13 +00:00
for (;;) {
sighand = rcu_dereference(tsk->sighand);
signal: Remove no longer required irqsave/restore Commit a841796f11c9 ("signal: align __lock_task_sighand() irq disabling and RCU") introduced a rcu read side critical section with interrupts disabled. The changelog suggested that a better long-term fix would be "to make rt_mutex_unlock() disable irqs when acquiring the rt_mutex structure's ->wait_lock". This long-term fix has been made in commit b4abf91047cf ("rtmutex: Make wait_lock irq safe") for a different reason. Therefore revert commit a841796f11c9 ("signal: align > __lock_task_sighand() irq disabling and RCU") as the interrupt disable dance is not longer required. The change was tested on the base of b4abf91047cf ("rtmutex: Make wait_lock irq safe") with a four hour run of rcutorture scenario TREE03 with lockdep enabled as suggested by Paul McKenney. Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: bigeasy@linutronix.de Link: https://lkml.kernel.org/r/20180525090507.22248-3-anna-maria@linutronix.de
2018-05-25 09:05:07 +00:00
if (unlikely(sighand == NULL))
[PATCH] introduce lock_task_sighand() helper Add lock_task_sighand() helper and converts group_send_sig_info() to use it. Hopefully we will have more users soon. This patch also removes '!sighand->count' and '!p->usage' checks, I think they both are bogus, racy and unneeded (but probably it makes sense to restore them as BUG_ON()s). ->sighand is cleared and it's ->count is decremented in release_task() with sighand->siglock held, so it is a bug to have '!p->usage || !->count' after we already locked and verified it is the same. On the other hand, an already dead task without ->sighand can have a non-zero ->usage due to ptrace, for example. If we read the stale value of ->sighand we must see the change after spin_lock(), because that change was done while holding that same old ->sighand.siglock. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-29 00:11:13 +00:00
break;
signal: Remove no longer required irqsave/restore Commit a841796f11c9 ("signal: align __lock_task_sighand() irq disabling and RCU") introduced a rcu read side critical section with interrupts disabled. The changelog suggested that a better long-term fix would be "to make rt_mutex_unlock() disable irqs when acquiring the rt_mutex structure's ->wait_lock". This long-term fix has been made in commit b4abf91047cf ("rtmutex: Make wait_lock irq safe") for a different reason. Therefore revert commit a841796f11c9 ("signal: align > __lock_task_sighand() irq disabling and RCU") as the interrupt disable dance is not longer required. The change was tested on the base of b4abf91047cf ("rtmutex: Make wait_lock irq safe") with a four hour run of rcutorture scenario TREE03 with lockdep enabled as suggested by Paul McKenney. Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: bigeasy@linutronix.de Link: https://lkml.kernel.org/r/20180525090507.22248-3-anna-maria@linutronix.de
2018-05-25 09:05:07 +00:00
signal: Document the RCU protection of ->sighand __cleanup_sighand() frees sighand without RCU grace period. This is correct but this looks "obviously buggy" and constantly confuses the readers, add the comments to explain how this works. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Rik van Riel <riel@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
2014-09-28 21:44:18 +00:00
/*
* This sighand can be already freed and even reused, but
mm: Rename SLAB_DESTROY_BY_RCU to SLAB_TYPESAFE_BY_RCU A group of Linux kernel hackers reported chasing a bug that resulted from their assumption that SLAB_DESTROY_BY_RCU provided an existence guarantee, that is, that no block from such a slab would be reallocated during an RCU read-side critical section. Of course, that is not the case. Instead, SLAB_DESTROY_BY_RCU only prevents freeing of an entire slab of blocks. However, there is a phrase for this, namely "type safety". This commit therefore renames SLAB_DESTROY_BY_RCU to SLAB_TYPESAFE_BY_RCU in order to avoid future instances of this sort of confusion. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: <linux-mm@kvack.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> [ paulmck: Add comments mentioning the old name, as requested by Eric Dumazet, in order to help people familiar with the old name find the new one. ] Acked-by: David Rientjes <rientjes@google.com>
2017-01-18 10:53:44 +00:00
* we rely on SLAB_TYPESAFE_BY_RCU and sighand_ctor() which
signal: Document the RCU protection of ->sighand __cleanup_sighand() frees sighand without RCU grace period. This is correct but this looks "obviously buggy" and constantly confuses the readers, add the comments to explain how this works. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Rik van Riel <riel@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
2014-09-28 21:44:18 +00:00
* initializes ->siglock: this slab can't go away, it has
* the same object type, ->siglock can't be reinitialized.
*
* We need to ensure that tsk->sighand is still the same
* after we take the lock, we can race with de_thread() or
* __exit_signal(). In the latter case the next iteration
* must see ->sighand == NULL.
*/
signal: Remove no longer required irqsave/restore Commit a841796f11c9 ("signal: align __lock_task_sighand() irq disabling and RCU") introduced a rcu read side critical section with interrupts disabled. The changelog suggested that a better long-term fix would be "to make rt_mutex_unlock() disable irqs when acquiring the rt_mutex structure's ->wait_lock". This long-term fix has been made in commit b4abf91047cf ("rtmutex: Make wait_lock irq safe") for a different reason. Therefore revert commit a841796f11c9 ("signal: align > __lock_task_sighand() irq disabling and RCU") as the interrupt disable dance is not longer required. The change was tested on the base of b4abf91047cf ("rtmutex: Make wait_lock irq safe") with a four hour run of rcutorture scenario TREE03 with lockdep enabled as suggested by Paul McKenney. Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: bigeasy@linutronix.de Link: https://lkml.kernel.org/r/20180525090507.22248-3-anna-maria@linutronix.de
2018-05-25 09:05:07 +00:00
spin_lock_irqsave(&sighand->siglock, *flags);
sched.h: Annotate sighand_struct with __rcu This patch fixes the following sparse errors by annotating the sighand_struct with __rcu kernel/fork.c:1511:9: error: incompatible types in comparison expression kernel/exit.c:100:19: error: incompatible types in comparison expression kernel/signal.c:1370:27: error: incompatible types in comparison expression This fix introduces the following sparse error in signal.c due to checking the sighand pointer without rcu primitives: kernel/signal.c:1386:21: error: incompatible types in comparison expression This new sparse error is also fixed in this patch. Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Acked-by: Paul E. McKenney <paulmck@kernel.org> Link: https://lore.kernel.org/r/20200124045908.26389-1-madhuparnabhowmik10@gmail.com Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2020-01-24 04:59:08 +00:00
if (likely(sighand == rcu_access_pointer(tsk->sighand)))
[PATCH] introduce lock_task_sighand() helper Add lock_task_sighand() helper and converts group_send_sig_info() to use it. Hopefully we will have more users soon. This patch also removes '!sighand->count' and '!p->usage' checks, I think they both are bogus, racy and unneeded (but probably it makes sense to restore them as BUG_ON()s). ->sighand is cleared and it's ->count is decremented in release_task() with sighand->siglock held, so it is a bug to have '!p->usage || !->count' after we already locked and verified it is the same. On the other hand, an already dead task without ->sighand can have a non-zero ->usage due to ptrace, for example. If we read the stale value of ->sighand we must see the change after spin_lock(), because that change was done while holding that same old ->sighand.siglock. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-29 00:11:13 +00:00
break;
signal: Remove no longer required irqsave/restore Commit a841796f11c9 ("signal: align __lock_task_sighand() irq disabling and RCU") introduced a rcu read side critical section with interrupts disabled. The changelog suggested that a better long-term fix would be "to make rt_mutex_unlock() disable irqs when acquiring the rt_mutex structure's ->wait_lock". This long-term fix has been made in commit b4abf91047cf ("rtmutex: Make wait_lock irq safe") for a different reason. Therefore revert commit a841796f11c9 ("signal: align > __lock_task_sighand() irq disabling and RCU") as the interrupt disable dance is not longer required. The change was tested on the base of b4abf91047cf ("rtmutex: Make wait_lock irq safe") with a four hour run of rcutorture scenario TREE03 with lockdep enabled as suggested by Paul McKenney. Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: bigeasy@linutronix.de Link: https://lkml.kernel.org/r/20180525090507.22248-3-anna-maria@linutronix.de
2018-05-25 09:05:07 +00:00
spin_unlock_irqrestore(&sighand->siglock, *flags);
[PATCH] introduce lock_task_sighand() helper Add lock_task_sighand() helper and converts group_send_sig_info() to use it. Hopefully we will have more users soon. This patch also removes '!sighand->count' and '!p->usage' checks, I think they both are bogus, racy and unneeded (but probably it makes sense to restore them as BUG_ON()s). ->sighand is cleared and it's ->count is decremented in release_task() with sighand->siglock held, so it is a bug to have '!p->usage || !->count' after we already locked and verified it is the same. On the other hand, an already dead task without ->sighand can have a non-zero ->usage due to ptrace, for example. If we read the stale value of ->sighand we must see the change after spin_lock(), because that change was done while holding that same old ->sighand.siglock. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-29 00:11:13 +00:00
}
signal: Remove no longer required irqsave/restore Commit a841796f11c9 ("signal: align __lock_task_sighand() irq disabling and RCU") introduced a rcu read side critical section with interrupts disabled. The changelog suggested that a better long-term fix would be "to make rt_mutex_unlock() disable irqs when acquiring the rt_mutex structure's ->wait_lock". This long-term fix has been made in commit b4abf91047cf ("rtmutex: Make wait_lock irq safe") for a different reason. Therefore revert commit a841796f11c9 ("signal: align > __lock_task_sighand() irq disabling and RCU") as the interrupt disable dance is not longer required. The change was tested on the base of b4abf91047cf ("rtmutex: Make wait_lock irq safe") with a four hour run of rcutorture scenario TREE03 with lockdep enabled as suggested by Paul McKenney. Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: bigeasy@linutronix.de Link: https://lkml.kernel.org/r/20180525090507.22248-3-anna-maria@linutronix.de
2018-05-25 09:05:07 +00:00
rcu_read_unlock();
[PATCH] introduce lock_task_sighand() helper Add lock_task_sighand() helper and converts group_send_sig_info() to use it. Hopefully we will have more users soon. This patch also removes '!sighand->count' and '!p->usage' checks, I think they both are bogus, racy and unneeded (but probably it makes sense to restore them as BUG_ON()s). ->sighand is cleared and it's ->count is decremented in release_task() with sighand->siglock held, so it is a bug to have '!p->usage || !->count' after we already locked and verified it is the same. On the other hand, an already dead task without ->sighand can have a non-zero ->usage due to ptrace, for example. If we read the stale value of ->sighand we must see the change after spin_lock(), because that change was done while holding that same old ->sighand.siglock. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-29 00:11:13 +00:00
return sighand;
}
CRED: Use RCU to access another task's creds and to release a task's own creds Use RCU to access another task's creds and to release a task's own creds. This means that it will be possible for the credentials of a task to be replaced without another task (a) requiring a full lock to read them, and (b) seeing deallocated memory. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 23:39:19 +00:00
/*
* send signal info to all the members of a group
*/
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
int group_send_sig_info(int sig, struct kernel_siginfo *info,
struct task_struct *p, enum pid_type type)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
CRED: Fix RCU warning due to previous patch fixing __task_cred()'s checks Commit 8f92054e7ca1 ("CRED: Fix __task_cred()'s lockdep check and banner comment") fixed the lockdep checks on __task_cred(). This has shown up a place in the signalling code where a lock should be held - namely that check_kill_permission() requires its callers to hold the RCU lock. Fix group_send_sig_info() to get the RCU read lock around its call to check_kill_permission(). Without this patch, the following warning can occur: =================================================== [ INFO: suspicious rcu_dereference_check() usage. ] --------------------------------------------------- kernel/signal.c:660 invoked rcu_dereference_check() without protection! ... Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-04 15:59:14 +00:00
int ret;
rcu_read_lock();
ret = check_kill_permission(sig, info, p);
rcu_read_unlock();
[PATCH] introduce lock_task_sighand() helper Add lock_task_sighand() helper and converts group_send_sig_info() to use it. Hopefully we will have more users soon. This patch also removes '!sighand->count' and '!p->usage' checks, I think they both are bogus, racy and unneeded (but probably it makes sense to restore them as BUG_ON()s). ->sighand is cleared and it's ->count is decremented in release_task() with sighand->siglock held, so it is a bug to have '!p->usage || !->count' after we already locked and verified it is the same. On the other hand, an already dead task without ->sighand can have a non-zero ->usage due to ptrace, for example. If we read the stale value of ->sighand we must see the change after spin_lock(), because that change was done while holding that same old ->sighand.siglock. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-29 00:11:13 +00:00
signals: introduce do_send_sig_info() helper Introduce do_send_sig_info() and convert group_send_sig_info(), send_sig_info(), do_send_specific() to use this helper. Hopefully it will have more users soon, it allows to specify specific/group behaviour via "bool group" argument. Shaves 80 bytes from .text. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: stephane eranian <eranian@googlemail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 22:57:00 +00:00
if (!ret && sig)
signal: Pass pid type into do_send_sig_info This passes the information we already have at the call sight into do_send_sig_info. Ultimately allowing for better handling of signals sent to a group of processes during fork. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-07-21 15:45:15 +00:00
ret = do_send_sig_info(sig, info, p, type);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return ret;
}
/*
Get rid of the kill_pgrp_info() function There's only one caller left - the kill_pgrp one - so merge these two functions and forget the kill_pgrp_info one. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Reviewed-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 12:19:22 +00:00
* __kill_pgrp_info() sends a signal to a process group: this is what the tty
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
* control characters do (^C, ^Z etc)
CRED: Use RCU to access another task's creds and to release a task's own creds Use RCU to access another task's creds and to release a task's own creds. This means that it will be possible for the credentials of a task to be replaced without another task (a) requiring a full lock to read them, and (b) seeing deallocated memory. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 23:39:19 +00:00
* - the caller must hold at least a readlock on tasklist_lock
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
int __kill_pgrp_info(int sig, struct kernel_siginfo *info, struct pid *pgrp)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct task_struct *p = NULL;
int retval, success;
success = 0;
retval = -ESRCH;
[PATCH] pid: implement signal functions that take a struct pid * Currently the signal functions all either take a task or a pid_t argument. This patch implements variants that take a struct pid *. After all of the users have been update it is my intention to remove the variants that take a pid_t as using pid_t can be more work (an extra hash table lookup) and difficult to get right in the presence of multiple pid namespaces. There are two kinds of functions introduced in this patch. The are the general use functions kill_pgrp and kill_pid which take a priv argument that is ultimately used to create the appropriate siginfo information, Then there are _kill_pgrp_info, kill_pgrp_info, kill_pid_info the internal implementation helpers that take an explicit siginfo. The distinction is made because filling out an explcit siginfo is tricky, and will be even more tricky when pid namespaces are introduced. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 09:17:10 +00:00
do_each_pid_task(pgrp, PIDTYPE_PGID, p) {
signal: Pass pid type into group_send_sig_info This passes the information we already have at the call sight into group_send_sig_info. Ultimatelly allowing for to better handle signals sent to a group of processes. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-07-13 23:40:57 +00:00
int err = group_send_sig_info(sig, info, p, PIDTYPE_PGID);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
success |= !err;
retval = err;
[PATCH] pid: implement signal functions that take a struct pid * Currently the signal functions all either take a task or a pid_t argument. This patch implements variants that take a struct pid *. After all of the users have been update it is my intention to remove the variants that take a pid_t as using pid_t can be more work (an extra hash table lookup) and difficult to get right in the presence of multiple pid namespaces. There are two kinds of functions introduced in this patch. The are the general use functions kill_pgrp and kill_pid which take a priv argument that is ultimately used to create the appropriate siginfo information, Then there are _kill_pgrp_info, kill_pgrp_info, kill_pid_info the internal implementation helpers that take an explicit siginfo. The distinction is made because filling out an explcit siginfo is tricky, and will be even more tricky when pid namespaces are introduced. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 09:17:10 +00:00
} while_each_pid_task(pgrp, PIDTYPE_PGID, p);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return success ? 0 : retval;
}
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
int kill_pid_info(int sig, struct kernel_siginfo *info, struct pid *pid)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
uglify kill_pid_info() to fix kill() vs exec() race kill_pid_info()->pid_task() could be the old leader of the execing process. In that case it is possible that the leader will be released before we take siglock. This means that kill_pid_info() (and thus sys_kill()) can return a false -ESRCH. Change the code to retry when lock_task_sighand() fails. The endless loop is not possible, __exit_signal() both clears ->sighand and does detach_pid(). Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 12:19:18 +00:00
int error = -ESRCH;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct task_struct *p;
signal: Exit RCU read-side critical section on each pass through loop The kill_pid_info() can potentially loop indefinitely if tasks are created and deleted sufficiently quickly, and if this happens, this function will remain in a single RCU read-side critical section indefinitely. This commit therefore exits the RCU read-side critical section on each pass through the loop. Because a race must happen to retry the loop, this should have no performance impact in the common case. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
2014-10-23 18:41:22 +00:00
for (;;) {
rcu_read_lock();
p = pid_task(pid, PIDTYPE_PID);
if (p)
signal: Pass pid type into group_send_sig_info This passes the information we already have at the call sight into group_send_sig_info. Ultimatelly allowing for to better handle signals sent to a group of processes. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-07-13 23:40:57 +00:00
error = group_send_sig_info(sig, info, p, PIDTYPE_TGID);
signal: Exit RCU read-side critical section on each pass through loop The kill_pid_info() can potentially loop indefinitely if tasks are created and deleted sufficiently quickly, and if this happens, this function will remain in a single RCU read-side critical section indefinitely. This commit therefore exits the RCU read-side critical section on each pass through the loop. Because a race must happen to retry the loop, this should have no performance impact in the common case. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
2014-10-23 18:41:22 +00:00
rcu_read_unlock();
if (likely(!p || error != -ESRCH))
return error;
kill_pid_info: don't take now unneeded tasklist_lock Previously handle_stop_signal(SIGCONT) could drop ->siglock. That is why kill_pid_info(SIGCONT) takes tasklist_lock to make sure the target task can't go away after unlock. Not needed now. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:45 +00:00
signal: Exit RCU read-side critical section on each pass through loop The kill_pid_info() can potentially loop indefinitely if tasks are created and deleted sufficiently quickly, and if this happens, this function will remain in a single RCU read-side critical section indefinitely. This commit therefore exits the RCU read-side critical section on each pass through the loop. Because a race must happen to retry the loop, this should have no performance impact in the common case. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
2014-10-23 18:41:22 +00:00
/*
* The task was unhashed in between, try again. If it
* is dead, pid_task() will return NULL, if we race with
* de_thread() it will find the new leader.
*/
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
static int kill_proc_info(int sig, struct kernel_siginfo *info, pid_t pid)
[PATCH] pid: implement signal functions that take a struct pid * Currently the signal functions all either take a task or a pid_t argument. This patch implements variants that take a struct pid *. After all of the users have been update it is my intention to remove the variants that take a pid_t as using pid_t can be more work (an extra hash table lookup) and difficult to get right in the presence of multiple pid namespaces. There are two kinds of functions introduced in this patch. The are the general use functions kill_pgrp and kill_pid which take a priv argument that is ultimately used to create the appropriate siginfo information, Then there are _kill_pgrp_info, kill_pgrp_info, kill_pid_info the internal implementation helpers that take an explicit siginfo. The distinction is made because filling out an explcit siginfo is tricky, and will be even more tricky when pid namespaces are introduced. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 09:17:10 +00:00
{
int error;
rcu_read_lock();
pid namespaces: changes to show virtual ids to user This is the largest patch in the set. Make all (I hope) the places where the pid is shown to or get from user operate on the virtual pids. The idea is: - all in-kernel data structures must store either struct pid itself or the pid's global nr, obtained with pid_nr() call; - when seeking the task from kernel code with the stored id one should use find_task_by_pid() call that works with global pids; - when showing pid's numerical value to the user the virtual one should be used, but however when one shows task's pid outside this task's namespace the global one is to be used; - when getting the pid from userspace one need to consider this as the virtual one and use appropriate task/pid-searching functions. [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: nuther build fix] [akpm@linux-foundation.org: yet nuther build fix] [akpm@linux-foundation.org: remove unneeded casts] Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 06:40:14 +00:00
error = kill_pid_info(sig, info, find_vpid(pid));
[PATCH] pid: implement signal functions that take a struct pid * Currently the signal functions all either take a task or a pid_t argument. This patch implements variants that take a struct pid *. After all of the users have been update it is my intention to remove the variants that take a pid_t as using pid_t can be more work (an extra hash table lookup) and difficult to get right in the presence of multiple pid namespaces. There are two kinds of functions introduced in this patch. The are the general use functions kill_pgrp and kill_pid which take a priv argument that is ultimately used to create the appropriate siginfo information, Then there are _kill_pgrp_info, kill_pgrp_info, kill_pid_info the internal implementation helpers that take an explicit siginfo. The distinction is made because filling out an explcit siginfo is tricky, and will be even more tricky when pid namespaces are introduced. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 09:17:10 +00:00
rcu_read_unlock();
return error;
}
signal: make kill_as_cred_perm() return bool kill_as_cred_perm() already behaves like a boolean function. Let's actually declare it as such too. Link: http://lkml.kernel.org/r/20180602103653.18181-3-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Morris <james.morris@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 04:59:55 +00:00
static inline bool kill_as_cred_perm(const struct cred *cred,
struct task_struct *target)
user namespace: usb: make usb urbs user namespace aware (v2) Add to the dev_state and alloc_async structures the user namespace corresponding to the uid and euid. Pass these to kill_pid_info_as_uid(), which can then implement a proper, user-namespace-aware uid check. Changelog: Sep 20: Per Oleg's suggestion: Instead of caching and passing user namespace, uid, and euid each separately, pass a struct cred. Sep 26: Address Alan Stern's comments: don't define a struct cred at usbdev_open(), and take and put a cred at async_completed() to ensure it lasts for the duration of kill_pid_info_as_cred(). Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26 15:45:18 +00:00
{
const struct cred *pcred = __task_cred(target);
signal: make kill_as_cred_perm() return bool kill_as_cred_perm() already behaves like a boolean function. Let's actually declare it as such too. Link: http://lkml.kernel.org/r/20180602103653.18181-3-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Morris <james.morris@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 04:59:55 +00:00
return uid_eq(cred->euid, pcred->suid) ||
uid_eq(cred->euid, pcred->uid) ||
uid_eq(cred->uid, pcred->suid) ||
uid_eq(cred->uid, pcred->uid);
user namespace: usb: make usb urbs user namespace aware (v2) Add to the dev_state and alloc_async structures the user namespace corresponding to the uid and euid. Pass these to kill_pid_info_as_uid(), which can then implement a proper, user-namespace-aware uid check. Changelog: Sep 20: Per Oleg's suggestion: Instead of caching and passing user namespace, uid, and euid each separately, pass a struct cred. Sep 26: Address Alan Stern's comments: don't define a struct cred at usbdev_open(), and take and put a cred at async_completed() to ensure it lasts for the duration of kill_pid_info_as_cred(). Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26 15:45:18 +00:00
}
signal/usb: Replace kill_pid_info_as_cred with kill_pid_usb_asyncio The usb support for asyncio encoded one of it's values in the wrong field. It should have used si_value but instead used si_addr which is not present in the _rt union member of struct siginfo. The practical result of this is that on a 64bit big endian kernel when delivering a signal to a 32bit process the si_addr field is set to NULL, instead of the expected pointer value. This issue can not be fixed in copy_siginfo_to_user32 as the usb usage of the the _sigfault (aka si_addr) member of the siginfo union when SI_ASYNCIO is set is incompatible with the POSIX and glibc usage of the _rt member of the siginfo union. Therefore replace kill_pid_info_as_cred with kill_pid_usb_asyncio a dedicated function for this one specific case. There are no other users of kill_pid_info_as_cred so this specialization should have no impact on the amount of code in the kernel. Have kill_pid_usb_asyncio take instead of a siginfo_t which is difficult and error prone, 3 arguments, a signal number, an errno value, and an address enconded as a sigval_t. The encoding of the address as a sigval_t allows the code that reads the userspace request for a signal to handle this compat issue along with all of the other compat issues. Add BUILD_BUG_ONs in kernel/signal.c to ensure that we can now place the pointer value at the in si_pid (instead of si_addr). That is the code now verifies that si_pid and si_addr always occur at the same location. Further the code veries that for native structures a value placed in si_pid and spilling into si_uid will appear in userspace in si_addr (on a byte by byte copy of siginfo or a field by field copy of siginfo). The code also verifies that for a 64bit kernel and a 32bit userspace the 32bit pointer will fit in si_pid. I have used the usbsig.c program below written by Alan Stern and slightly tweaked by me to run on a big endian machine to verify the issue exists (on sparc64) and to confirm the patch below fixes the issue. /* usbsig.c -- test USB async signal delivery */ #define _GNU_SOURCE #include <stdio.h> #include <fcntl.h> #include <signal.h> #include <string.h> #include <sys/ioctl.h> #include <unistd.h> #include <endian.h> #include <linux/usb/ch9.h> #include <linux/usbdevice_fs.h> static struct usbdevfs_urb urb; static struct usbdevfs_disconnectsignal ds; static volatile sig_atomic_t done = 0; void urb_handler(int sig, siginfo_t *info , void *ucontext) { printf("Got signal %d, signo %d errno %d code %d addr: %p urb: %p\n", sig, info->si_signo, info->si_errno, info->si_code, info->si_addr, &urb); printf("%s\n", (info->si_addr == &urb) ? "Good" : "Bad"); } void ds_handler(int sig, siginfo_t *info , void *ucontext) { printf("Got signal %d, signo %d errno %d code %d addr: %p ds: %p\n", sig, info->si_signo, info->si_errno, info->si_code, info->si_addr, &ds); printf("%s\n", (info->si_addr == &ds) ? "Good" : "Bad"); done = 1; } int main(int argc, char **argv) { char *devfilename; int fd; int rc; struct sigaction act; struct usb_ctrlrequest *req; void *ptr; char buf[80]; if (argc != 2) { fprintf(stderr, "Usage: usbsig device-file-name\n"); return 1; } devfilename = argv[1]; fd = open(devfilename, O_RDWR); if (fd == -1) { perror("Error opening device file"); return 1; } act.sa_sigaction = urb_handler; sigemptyset(&act.sa_mask); act.sa_flags = SA_SIGINFO; rc = sigaction(SIGUSR1, &act, NULL); if (rc == -1) { perror("Error in sigaction"); return 1; } act.sa_sigaction = ds_handler; sigemptyset(&act.sa_mask); act.sa_flags = SA_SIGINFO; rc = sigaction(SIGUSR2, &act, NULL); if (rc == -1) { perror("Error in sigaction"); return 1; } memset(&urb, 0, sizeof(urb)); urb.type = USBDEVFS_URB_TYPE_CONTROL; urb.endpoint = USB_DIR_IN | 0; urb.buffer = buf; urb.buffer_length = sizeof(buf); urb.signr = SIGUSR1; req = (struct usb_ctrlrequest *) buf; req->bRequestType = USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE; req->bRequest = USB_REQ_GET_DESCRIPTOR; req->wValue = htole16(USB_DT_DEVICE << 8); req->wIndex = htole16(0); req->wLength = htole16(sizeof(buf) - sizeof(*req)); rc = ioctl(fd, USBDEVFS_SUBMITURB, &urb); if (rc == -1) { perror("Error in SUBMITURB ioctl"); return 1; } rc = ioctl(fd, USBDEVFS_REAPURB, &ptr); if (rc == -1) { perror("Error in REAPURB ioctl"); return 1; } memset(&ds, 0, sizeof(ds)); ds.signr = SIGUSR2; ds.context = &ds; rc = ioctl(fd, USBDEVFS_DISCSIGNAL, &ds); if (rc == -1) { perror("Error in DISCSIGNAL ioctl"); return 1; } printf("Waiting for usb disconnect\n"); while (!done) { sleep(1); } close(fd); return 0; } Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Oliver Neukum <oneukum@suse.com> Fixes: v2.3.39 Cc: stable@vger.kernel.org Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-02-08 01:44:12 +00:00
/*
* The usb asyncio usage of siginfo is wrong. The glibc support
* for asyncio which uses SI_ASYNCIO assumes the layout is SIL_RT.
* AKA after the generic fields:
* kernel_pid_t si_pid;
* kernel_uid32_t si_uid;
* sigval_t si_value;
*
* Unfortunately when usb generates SI_ASYNCIO it assumes the layout
* after the generic fields is:
* void __user *si_addr;
*
* This is a practical problem when there is a 64bit big endian kernel
* and a 32bit userspace. As the 32bit address will encoded in the low
* 32bits of the pointer. Those low 32bits will be stored at higher
* address than appear in a 32 bit pointer. So userspace will not
* see the address it was expecting for it's completions.
*
* There is nothing in the encoding that can allow
* copy_siginfo_to_user32 to detect this confusion of formats, so
* handle this by requiring the caller of kill_pid_usb_asyncio to
* notice when this situration takes place and to store the 32bit
* pointer in sival_int, instead of sival_addr of the sigval_t addr
* parameter.
*/
int kill_pid_usb_asyncio(int sig, int errno, sigval_t addr,
struct pid *pid, const struct cred *cred)
[PATCH] Fix signal sending in usbdevio on async URB completion If a process issues an URB from userspace and (starts to) terminate before the URB comes back, we run into the issue described above. This is because the urb saves a pointer to "current" when it is posted to the device, but there's no guarantee that this pointer is still valid afterwards. In fact, there are three separate issues: 1) the pointer to "current" can become invalid, since the task could be completely gone when the URB completion comes back from the device. 2) Even if the saved task pointer is still pointing to a valid task_struct, task_struct->sighand could have gone meanwhile. 3) Even if the process is perfectly fine, permissions may have changed, and we can no longer send it a signal. So what we do instead, is to save the PID and uid's of the process, and introduce a new kill_proc_info_as_uid() function. Signed-off-by: Harald Welte <laforge@gnumonks.org> [ Fixed up types and added symbol exports ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-10 17:44:29 +00:00
{
signal/usb: Replace kill_pid_info_as_cred with kill_pid_usb_asyncio The usb support for asyncio encoded one of it's values in the wrong field. It should have used si_value but instead used si_addr which is not present in the _rt union member of struct siginfo. The practical result of this is that on a 64bit big endian kernel when delivering a signal to a 32bit process the si_addr field is set to NULL, instead of the expected pointer value. This issue can not be fixed in copy_siginfo_to_user32 as the usb usage of the the _sigfault (aka si_addr) member of the siginfo union when SI_ASYNCIO is set is incompatible with the POSIX and glibc usage of the _rt member of the siginfo union. Therefore replace kill_pid_info_as_cred with kill_pid_usb_asyncio a dedicated function for this one specific case. There are no other users of kill_pid_info_as_cred so this specialization should have no impact on the amount of code in the kernel. Have kill_pid_usb_asyncio take instead of a siginfo_t which is difficult and error prone, 3 arguments, a signal number, an errno value, and an address enconded as a sigval_t. The encoding of the address as a sigval_t allows the code that reads the userspace request for a signal to handle this compat issue along with all of the other compat issues. Add BUILD_BUG_ONs in kernel/signal.c to ensure that we can now place the pointer value at the in si_pid (instead of si_addr). That is the code now verifies that si_pid and si_addr always occur at the same location. Further the code veries that for native structures a value placed in si_pid and spilling into si_uid will appear in userspace in si_addr (on a byte by byte copy of siginfo or a field by field copy of siginfo). The code also verifies that for a 64bit kernel and a 32bit userspace the 32bit pointer will fit in si_pid. I have used the usbsig.c program below written by Alan Stern and slightly tweaked by me to run on a big endian machine to verify the issue exists (on sparc64) and to confirm the patch below fixes the issue. /* usbsig.c -- test USB async signal delivery */ #define _GNU_SOURCE #include <stdio.h> #include <fcntl.h> #include <signal.h> #include <string.h> #include <sys/ioctl.h> #include <unistd.h> #include <endian.h> #include <linux/usb/ch9.h> #include <linux/usbdevice_fs.h> static struct usbdevfs_urb urb; static struct usbdevfs_disconnectsignal ds; static volatile sig_atomic_t done = 0; void urb_handler(int sig, siginfo_t *info , void *ucontext) { printf("Got signal %d, signo %d errno %d code %d addr: %p urb: %p\n", sig, info->si_signo, info->si_errno, info->si_code, info->si_addr, &urb); printf("%s\n", (info->si_addr == &urb) ? "Good" : "Bad"); } void ds_handler(int sig, siginfo_t *info , void *ucontext) { printf("Got signal %d, signo %d errno %d code %d addr: %p ds: %p\n", sig, info->si_signo, info->si_errno, info->si_code, info->si_addr, &ds); printf("%s\n", (info->si_addr == &ds) ? "Good" : "Bad"); done = 1; } int main(int argc, char **argv) { char *devfilename; int fd; int rc; struct sigaction act; struct usb_ctrlrequest *req; void *ptr; char buf[80]; if (argc != 2) { fprintf(stderr, "Usage: usbsig device-file-name\n"); return 1; } devfilename = argv[1]; fd = open(devfilename, O_RDWR); if (fd == -1) { perror("Error opening device file"); return 1; } act.sa_sigaction = urb_handler; sigemptyset(&act.sa_mask); act.sa_flags = SA_SIGINFO; rc = sigaction(SIGUSR1, &act, NULL); if (rc == -1) { perror("Error in sigaction"); return 1; } act.sa_sigaction = ds_handler; sigemptyset(&act.sa_mask); act.sa_flags = SA_SIGINFO; rc = sigaction(SIGUSR2, &act, NULL); if (rc == -1) { perror("Error in sigaction"); return 1; } memset(&urb, 0, sizeof(urb)); urb.type = USBDEVFS_URB_TYPE_CONTROL; urb.endpoint = USB_DIR_IN | 0; urb.buffer = buf; urb.buffer_length = sizeof(buf); urb.signr = SIGUSR1; req = (struct usb_ctrlrequest *) buf; req->bRequestType = USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE; req->bRequest = USB_REQ_GET_DESCRIPTOR; req->wValue = htole16(USB_DT_DEVICE << 8); req->wIndex = htole16(0); req->wLength = htole16(sizeof(buf) - sizeof(*req)); rc = ioctl(fd, USBDEVFS_SUBMITURB, &urb); if (rc == -1) { perror("Error in SUBMITURB ioctl"); return 1; } rc = ioctl(fd, USBDEVFS_REAPURB, &ptr); if (rc == -1) { perror("Error in REAPURB ioctl"); return 1; } memset(&ds, 0, sizeof(ds)); ds.signr = SIGUSR2; ds.context = &ds; rc = ioctl(fd, USBDEVFS_DISCSIGNAL, &ds); if (rc == -1) { perror("Error in DISCSIGNAL ioctl"); return 1; } printf("Waiting for usb disconnect\n"); while (!done) { sleep(1); } close(fd); return 0; } Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Oliver Neukum <oneukum@suse.com> Fixes: v2.3.39 Cc: stable@vger.kernel.org Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-02-08 01:44:12 +00:00
struct kernel_siginfo info;
[PATCH] Fix signal sending in usbdevio on async URB completion If a process issues an URB from userspace and (starts to) terminate before the URB comes back, we run into the issue described above. This is because the urb saves a pointer to "current" when it is posted to the device, but there's no guarantee that this pointer is still valid afterwards. In fact, there are three separate issues: 1) the pointer to "current" can become invalid, since the task could be completely gone when the URB completion comes back from the device. 2) Even if the saved task pointer is still pointing to a valid task_struct, task_struct->sighand could have gone meanwhile. 3) Even if the process is perfectly fine, permissions may have changed, and we can no longer send it a signal. So what we do instead, is to save the PID and uid's of the process, and introduce a new kill_proc_info_as_uid() function. Signed-off-by: Harald Welte <laforge@gnumonks.org> [ Fixed up types and added symbol exports ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-10 17:44:29 +00:00
struct task_struct *p;
signal: Fix racy access to __task_cred in kill_pid_info_as_uid() kill_pid_info_as_uid() accesses __task_cred() without being in a RCU read side critical section. tasklist_lock is not protecting that when CONFIG_TREE_PREEMPT_RCU=y. Convert the whole tasklist_lock section to rcu and use lock_task_sighand to prevent the exit race. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <20091210004703.232302055@linutronix.de> Acked-by: Oleg Nesterov <oleg@redhat.com>
2009-12-10 00:53:17 +00:00
unsigned long flags;
signal/usb: Replace kill_pid_info_as_cred with kill_pid_usb_asyncio The usb support for asyncio encoded one of it's values in the wrong field. It should have used si_value but instead used si_addr which is not present in the _rt union member of struct siginfo. The practical result of this is that on a 64bit big endian kernel when delivering a signal to a 32bit process the si_addr field is set to NULL, instead of the expected pointer value. This issue can not be fixed in copy_siginfo_to_user32 as the usb usage of the the _sigfault (aka si_addr) member of the siginfo union when SI_ASYNCIO is set is incompatible with the POSIX and glibc usage of the _rt member of the siginfo union. Therefore replace kill_pid_info_as_cred with kill_pid_usb_asyncio a dedicated function for this one specific case. There are no other users of kill_pid_info_as_cred so this specialization should have no impact on the amount of code in the kernel. Have kill_pid_usb_asyncio take instead of a siginfo_t which is difficult and error prone, 3 arguments, a signal number, an errno value, and an address enconded as a sigval_t. The encoding of the address as a sigval_t allows the code that reads the userspace request for a signal to handle this compat issue along with all of the other compat issues. Add BUILD_BUG_ONs in kernel/signal.c to ensure that we can now place the pointer value at the in si_pid (instead of si_addr). That is the code now verifies that si_pid and si_addr always occur at the same location. Further the code veries that for native structures a value placed in si_pid and spilling into si_uid will appear in userspace in si_addr (on a byte by byte copy of siginfo or a field by field copy of siginfo). The code also verifies that for a 64bit kernel and a 32bit userspace the 32bit pointer will fit in si_pid. I have used the usbsig.c program below written by Alan Stern and slightly tweaked by me to run on a big endian machine to verify the issue exists (on sparc64) and to confirm the patch below fixes the issue. /* usbsig.c -- test USB async signal delivery */ #define _GNU_SOURCE #include <stdio.h> #include <fcntl.h> #include <signal.h> #include <string.h> #include <sys/ioctl.h> #include <unistd.h> #include <endian.h> #include <linux/usb/ch9.h> #include <linux/usbdevice_fs.h> static struct usbdevfs_urb urb; static struct usbdevfs_disconnectsignal ds; static volatile sig_atomic_t done = 0; void urb_handler(int sig, siginfo_t *info , void *ucontext) { printf("Got signal %d, signo %d errno %d code %d addr: %p urb: %p\n", sig, info->si_signo, info->si_errno, info->si_code, info->si_addr, &urb); printf("%s\n", (info->si_addr == &urb) ? "Good" : "Bad"); } void ds_handler(int sig, siginfo_t *info , void *ucontext) { printf("Got signal %d, signo %d errno %d code %d addr: %p ds: %p\n", sig, info->si_signo, info->si_errno, info->si_code, info->si_addr, &ds); printf("%s\n", (info->si_addr == &ds) ? "Good" : "Bad"); done = 1; } int main(int argc, char **argv) { char *devfilename; int fd; int rc; struct sigaction act; struct usb_ctrlrequest *req; void *ptr; char buf[80]; if (argc != 2) { fprintf(stderr, "Usage: usbsig device-file-name\n"); return 1; } devfilename = argv[1]; fd = open(devfilename, O_RDWR); if (fd == -1) { perror("Error opening device file"); return 1; } act.sa_sigaction = urb_handler; sigemptyset(&act.sa_mask); act.sa_flags = SA_SIGINFO; rc = sigaction(SIGUSR1, &act, NULL); if (rc == -1) { perror("Error in sigaction"); return 1; } act.sa_sigaction = ds_handler; sigemptyset(&act.sa_mask); act.sa_flags = SA_SIGINFO; rc = sigaction(SIGUSR2, &act, NULL); if (rc == -1) { perror("Error in sigaction"); return 1; } memset(&urb, 0, sizeof(urb)); urb.type = USBDEVFS_URB_TYPE_CONTROL; urb.endpoint = USB_DIR_IN | 0; urb.buffer = buf; urb.buffer_length = sizeof(buf); urb.signr = SIGUSR1; req = (struct usb_ctrlrequest *) buf; req->bRequestType = USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE; req->bRequest = USB_REQ_GET_DESCRIPTOR; req->wValue = htole16(USB_DT_DEVICE << 8); req->wIndex = htole16(0); req->wLength = htole16(sizeof(buf) - sizeof(*req)); rc = ioctl(fd, USBDEVFS_SUBMITURB, &urb); if (rc == -1) { perror("Error in SUBMITURB ioctl"); return 1; } rc = ioctl(fd, USBDEVFS_REAPURB, &ptr); if (rc == -1) { perror("Error in REAPURB ioctl"); return 1; } memset(&ds, 0, sizeof(ds)); ds.signr = SIGUSR2; ds.context = &ds; rc = ioctl(fd, USBDEVFS_DISCSIGNAL, &ds); if (rc == -1) { perror("Error in DISCSIGNAL ioctl"); return 1; } printf("Waiting for usb disconnect\n"); while (!done) { sleep(1); } close(fd); return 0; } Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Oliver Neukum <oneukum@suse.com> Fixes: v2.3.39 Cc: stable@vger.kernel.org Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-02-08 01:44:12 +00:00
int ret = -EINVAL;
clear_siginfo(&info);
info.si_signo = sig;
info.si_errno = errno;
info.si_code = SI_ASYNCIO;
*((sigval_t *)&info.si_pid) = addr;
[PATCH] Fix signal sending in usbdevio on async URB completion If a process issues an URB from userspace and (starts to) terminate before the URB comes back, we run into the issue described above. This is because the urb saves a pointer to "current" when it is posted to the device, but there's no guarantee that this pointer is still valid afterwards. In fact, there are three separate issues: 1) the pointer to "current" can become invalid, since the task could be completely gone when the URB completion comes back from the device. 2) Even if the saved task pointer is still pointing to a valid task_struct, task_struct->sighand could have gone meanwhile. 3) Even if the process is perfectly fine, permissions may have changed, and we can no longer send it a signal. So what we do instead, is to save the PID and uid's of the process, and introduce a new kill_proc_info_as_uid() function. Signed-off-by: Harald Welte <laforge@gnumonks.org> [ Fixed up types and added symbol exports ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-10 17:44:29 +00:00
if (!valid_signal(sig))
return ret;
signal: Fix racy access to __task_cred in kill_pid_info_as_uid() kill_pid_info_as_uid() accesses __task_cred() without being in a RCU read side critical section. tasklist_lock is not protecting that when CONFIG_TREE_PREEMPT_RCU=y. Convert the whole tasklist_lock section to rcu and use lock_task_sighand to prevent the exit race. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <20091210004703.232302055@linutronix.de> Acked-by: Oleg Nesterov <oleg@redhat.com>
2009-12-10 00:53:17 +00:00
rcu_read_lock();
[PATCH] usb: fixup usb so it uses struct pid The problem with remembering a user space process by its pid is that it is possible that the process will exit, pid wrap around will occur. Converting to a struct pid avoid that problem, and paves the way for implementing a pid namespace. Also since usb is the only user of kill_proc_info_as_uid rename kill_proc_info_as_uid to kill_pid_info_as_uid and have the new version take a struct pid. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 09:17:28 +00:00
p = pid_task(pid, PIDTYPE_PID);
[PATCH] Fix signal sending in usbdevio on async URB completion If a process issues an URB from userspace and (starts to) terminate before the URB comes back, we run into the issue described above. This is because the urb saves a pointer to "current" when it is posted to the device, but there's no guarantee that this pointer is still valid afterwards. In fact, there are three separate issues: 1) the pointer to "current" can become invalid, since the task could be completely gone when the URB completion comes back from the device. 2) Even if the saved task pointer is still pointing to a valid task_struct, task_struct->sighand could have gone meanwhile. 3) Even if the process is perfectly fine, permissions may have changed, and we can no longer send it a signal. So what we do instead, is to save the PID and uid's of the process, and introduce a new kill_proc_info_as_uid() function. Signed-off-by: Harald Welte <laforge@gnumonks.org> [ Fixed up types and added symbol exports ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-10 17:44:29 +00:00
if (!p) {
ret = -ESRCH;
goto out_unlock;
}
signal/usb: Replace kill_pid_info_as_cred with kill_pid_usb_asyncio The usb support for asyncio encoded one of it's values in the wrong field. It should have used si_value but instead used si_addr which is not present in the _rt union member of struct siginfo. The practical result of this is that on a 64bit big endian kernel when delivering a signal to a 32bit process the si_addr field is set to NULL, instead of the expected pointer value. This issue can not be fixed in copy_siginfo_to_user32 as the usb usage of the the _sigfault (aka si_addr) member of the siginfo union when SI_ASYNCIO is set is incompatible with the POSIX and glibc usage of the _rt member of the siginfo union. Therefore replace kill_pid_info_as_cred with kill_pid_usb_asyncio a dedicated function for this one specific case. There are no other users of kill_pid_info_as_cred so this specialization should have no impact on the amount of code in the kernel. Have kill_pid_usb_asyncio take instead of a siginfo_t which is difficult and error prone, 3 arguments, a signal number, an errno value, and an address enconded as a sigval_t. The encoding of the address as a sigval_t allows the code that reads the userspace request for a signal to handle this compat issue along with all of the other compat issues. Add BUILD_BUG_ONs in kernel/signal.c to ensure that we can now place the pointer value at the in si_pid (instead of si_addr). That is the code now verifies that si_pid and si_addr always occur at the same location. Further the code veries that for native structures a value placed in si_pid and spilling into si_uid will appear in userspace in si_addr (on a byte by byte copy of siginfo or a field by field copy of siginfo). The code also verifies that for a 64bit kernel and a 32bit userspace the 32bit pointer will fit in si_pid. I have used the usbsig.c program below written by Alan Stern and slightly tweaked by me to run on a big endian machine to verify the issue exists (on sparc64) and to confirm the patch below fixes the issue. /* usbsig.c -- test USB async signal delivery */ #define _GNU_SOURCE #include <stdio.h> #include <fcntl.h> #include <signal.h> #include <string.h> #include <sys/ioctl.h> #include <unistd.h> #include <endian.h> #include <linux/usb/ch9.h> #include <linux/usbdevice_fs.h> static struct usbdevfs_urb urb; static struct usbdevfs_disconnectsignal ds; static volatile sig_atomic_t done = 0; void urb_handler(int sig, siginfo_t *info , void *ucontext) { printf("Got signal %d, signo %d errno %d code %d addr: %p urb: %p\n", sig, info->si_signo, info->si_errno, info->si_code, info->si_addr, &urb); printf("%s\n", (info->si_addr == &urb) ? "Good" : "Bad"); } void ds_handler(int sig, siginfo_t *info , void *ucontext) { printf("Got signal %d, signo %d errno %d code %d addr: %p ds: %p\n", sig, info->si_signo, info->si_errno, info->si_code, info->si_addr, &ds); printf("%s\n", (info->si_addr == &ds) ? "Good" : "Bad"); done = 1; } int main(int argc, char **argv) { char *devfilename; int fd; int rc; struct sigaction act; struct usb_ctrlrequest *req; void *ptr; char buf[80]; if (argc != 2) { fprintf(stderr, "Usage: usbsig device-file-name\n"); return 1; } devfilename = argv[1]; fd = open(devfilename, O_RDWR); if (fd == -1) { perror("Error opening device file"); return 1; } act.sa_sigaction = urb_handler; sigemptyset(&act.sa_mask); act.sa_flags = SA_SIGINFO; rc = sigaction(SIGUSR1, &act, NULL); if (rc == -1) { perror("Error in sigaction"); return 1; } act.sa_sigaction = ds_handler; sigemptyset(&act.sa_mask); act.sa_flags = SA_SIGINFO; rc = sigaction(SIGUSR2, &act, NULL); if (rc == -1) { perror("Error in sigaction"); return 1; } memset(&urb, 0, sizeof(urb)); urb.type = USBDEVFS_URB_TYPE_CONTROL; urb.endpoint = USB_DIR_IN | 0; urb.buffer = buf; urb.buffer_length = sizeof(buf); urb.signr = SIGUSR1; req = (struct usb_ctrlrequest *) buf; req->bRequestType = USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE; req->bRequest = USB_REQ_GET_DESCRIPTOR; req->wValue = htole16(USB_DT_DEVICE << 8); req->wIndex = htole16(0); req->wLength = htole16(sizeof(buf) - sizeof(*req)); rc = ioctl(fd, USBDEVFS_SUBMITURB, &urb); if (rc == -1) { perror("Error in SUBMITURB ioctl"); return 1; } rc = ioctl(fd, USBDEVFS_REAPURB, &ptr); if (rc == -1) { perror("Error in REAPURB ioctl"); return 1; } memset(&ds, 0, sizeof(ds)); ds.signr = SIGUSR2; ds.context = &ds; rc = ioctl(fd, USBDEVFS_DISCSIGNAL, &ds); if (rc == -1) { perror("Error in DISCSIGNAL ioctl"); return 1; } printf("Waiting for usb disconnect\n"); while (!done) { sleep(1); } close(fd); return 0; } Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Oliver Neukum <oneukum@suse.com> Fixes: v2.3.39 Cc: stable@vger.kernel.org Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-02-08 01:44:12 +00:00
if (!kill_as_cred_perm(cred, p)) {
[PATCH] Fix signal sending in usbdevio on async URB completion If a process issues an URB from userspace and (starts to) terminate before the URB comes back, we run into the issue described above. This is because the urb saves a pointer to "current" when it is posted to the device, but there's no guarantee that this pointer is still valid afterwards. In fact, there are three separate issues: 1) the pointer to "current" can become invalid, since the task could be completely gone when the URB completion comes back from the device. 2) Even if the saved task pointer is still pointing to a valid task_struct, task_struct->sighand could have gone meanwhile. 3) Even if the process is perfectly fine, permissions may have changed, and we can no longer send it a signal. So what we do instead, is to save the PID and uid's of the process, and introduce a new kill_proc_info_as_uid() function. Signed-off-by: Harald Welte <laforge@gnumonks.org> [ Fixed up types and added symbol exports ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-10 17:44:29 +00:00
ret = -EPERM;
goto out_unlock;
}
signal/usb: Replace kill_pid_info_as_cred with kill_pid_usb_asyncio The usb support for asyncio encoded one of it's values in the wrong field. It should have used si_value but instead used si_addr which is not present in the _rt union member of struct siginfo. The practical result of this is that on a 64bit big endian kernel when delivering a signal to a 32bit process the si_addr field is set to NULL, instead of the expected pointer value. This issue can not be fixed in copy_siginfo_to_user32 as the usb usage of the the _sigfault (aka si_addr) member of the siginfo union when SI_ASYNCIO is set is incompatible with the POSIX and glibc usage of the _rt member of the siginfo union. Therefore replace kill_pid_info_as_cred with kill_pid_usb_asyncio a dedicated function for this one specific case. There are no other users of kill_pid_info_as_cred so this specialization should have no impact on the amount of code in the kernel. Have kill_pid_usb_asyncio take instead of a siginfo_t which is difficult and error prone, 3 arguments, a signal number, an errno value, and an address enconded as a sigval_t. The encoding of the address as a sigval_t allows the code that reads the userspace request for a signal to handle this compat issue along with all of the other compat issues. Add BUILD_BUG_ONs in kernel/signal.c to ensure that we can now place the pointer value at the in si_pid (instead of si_addr). That is the code now verifies that si_pid and si_addr always occur at the same location. Further the code veries that for native structures a value placed in si_pid and spilling into si_uid will appear in userspace in si_addr (on a byte by byte copy of siginfo or a field by field copy of siginfo). The code also verifies that for a 64bit kernel and a 32bit userspace the 32bit pointer will fit in si_pid. I have used the usbsig.c program below written by Alan Stern and slightly tweaked by me to run on a big endian machine to verify the issue exists (on sparc64) and to confirm the patch below fixes the issue. /* usbsig.c -- test USB async signal delivery */ #define _GNU_SOURCE #include <stdio.h> #include <fcntl.h> #include <signal.h> #include <string.h> #include <sys/ioctl.h> #include <unistd.h> #include <endian.h> #include <linux/usb/ch9.h> #include <linux/usbdevice_fs.h> static struct usbdevfs_urb urb; static struct usbdevfs_disconnectsignal ds; static volatile sig_atomic_t done = 0; void urb_handler(int sig, siginfo_t *info , void *ucontext) { printf("Got signal %d, signo %d errno %d code %d addr: %p urb: %p\n", sig, info->si_signo, info->si_errno, info->si_code, info->si_addr, &urb); printf("%s\n", (info->si_addr == &urb) ? "Good" : "Bad"); } void ds_handler(int sig, siginfo_t *info , void *ucontext) { printf("Got signal %d, signo %d errno %d code %d addr: %p ds: %p\n", sig, info->si_signo, info->si_errno, info->si_code, info->si_addr, &ds); printf("%s\n", (info->si_addr == &ds) ? "Good" : "Bad"); done = 1; } int main(int argc, char **argv) { char *devfilename; int fd; int rc; struct sigaction act; struct usb_ctrlrequest *req; void *ptr; char buf[80]; if (argc != 2) { fprintf(stderr, "Usage: usbsig device-file-name\n"); return 1; } devfilename = argv[1]; fd = open(devfilename, O_RDWR); if (fd == -1) { perror("Error opening device file"); return 1; } act.sa_sigaction = urb_handler; sigemptyset(&act.sa_mask); act.sa_flags = SA_SIGINFO; rc = sigaction(SIGUSR1, &act, NULL); if (rc == -1) { perror("Error in sigaction"); return 1; } act.sa_sigaction = ds_handler; sigemptyset(&act.sa_mask); act.sa_flags = SA_SIGINFO; rc = sigaction(SIGUSR2, &act, NULL); if (rc == -1) { perror("Error in sigaction"); return 1; } memset(&urb, 0, sizeof(urb)); urb.type = USBDEVFS_URB_TYPE_CONTROL; urb.endpoint = USB_DIR_IN | 0; urb.buffer = buf; urb.buffer_length = sizeof(buf); urb.signr = SIGUSR1; req = (struct usb_ctrlrequest *) buf; req->bRequestType = USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE; req->bRequest = USB_REQ_GET_DESCRIPTOR; req->wValue = htole16(USB_DT_DEVICE << 8); req->wIndex = htole16(0); req->wLength = htole16(sizeof(buf) - sizeof(*req)); rc = ioctl(fd, USBDEVFS_SUBMITURB, &urb); if (rc == -1) { perror("Error in SUBMITURB ioctl"); return 1; } rc = ioctl(fd, USBDEVFS_REAPURB, &ptr); if (rc == -1) { perror("Error in REAPURB ioctl"); return 1; } memset(&ds, 0, sizeof(ds)); ds.signr = SIGUSR2; ds.context = &ds; rc = ioctl(fd, USBDEVFS_DISCSIGNAL, &ds); if (rc == -1) { perror("Error in DISCSIGNAL ioctl"); return 1; } printf("Waiting for usb disconnect\n"); while (!done) { sleep(1); } close(fd); return 0; } Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Oliver Neukum <oneukum@suse.com> Fixes: v2.3.39 Cc: stable@vger.kernel.org Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-02-08 01:44:12 +00:00
ret = security_task_kill(p, &info, sig, cred);
[PATCH] SELinux: add security hook call to kill_proc_info_as_uid This patch adds a call to the extended security_task_kill hook introduced by the prior patch to the kill_proc_info_as_uid function so that these signals can be properly mediated by security modules. It also updates the existing hook call in check_kill_permission. Signed-off-by: David Quigley <dpquigl@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@namei.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30 08:55:47 +00:00
if (ret)
goto out_unlock;
signal: Fix racy access to __task_cred in kill_pid_info_as_uid() kill_pid_info_as_uid() accesses __task_cred() without being in a RCU read side critical section. tasklist_lock is not protecting that when CONFIG_TREE_PREEMPT_RCU=y. Convert the whole tasklist_lock section to rcu and use lock_task_sighand to prevent the exit race. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <20091210004703.232302055@linutronix.de> Acked-by: Oleg Nesterov <oleg@redhat.com>
2009-12-10 00:53:17 +00:00
if (sig) {
if (lock_task_sighand(p, &flags)) {
signal: Move the computation of force into send_signal and correct it. Forcing a signal or not allowing a pid namespace init to ignore SIGKILL or SIGSTOP is more cleanly computed in send_signal. There are two cases where we don't allow a pid namespace init to ignore SIGKILL or SIGSTOP. If the sending process is from an ancestor pid namespace and as such is effectively the god to the target process, and if the it is the kernel that is sending the signal, not another application. It is known that a process is from an ancestor pid namespace if it can see it's target but it's target does not have a pid for the sender in it's pid namespace. It is know that a signal is sent from the kernel if si_code is set to SI_KERNEL or info is SEND_SIG_PRIV (which ultimately generates a signal with si_code == SI_KERNEL). The only signals that matter are SIGKILL and SIGSTOP neither of which can really be caught, and both of which always have a siginfo layout that includes si_uid and si_pid. Therefore we never need to worry about forcing a signal when si_pid and si_uid are absent. So handle the two special cases of info and the case when si_pid and si_uid are present. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-16 03:23:32 +00:00
ret = __send_signal(sig, &info, p, PIDTYPE_TGID, false);
signal: Fix racy access to __task_cred in kill_pid_info_as_uid() kill_pid_info_as_uid() accesses __task_cred() without being in a RCU read side critical section. tasklist_lock is not protecting that when CONFIG_TREE_PREEMPT_RCU=y. Convert the whole tasklist_lock section to rcu and use lock_task_sighand to prevent the exit race. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <20091210004703.232302055@linutronix.de> Acked-by: Oleg Nesterov <oleg@redhat.com>
2009-12-10 00:53:17 +00:00
unlock_task_sighand(p, &flags);
} else
ret = -ESRCH;
[PATCH] Fix signal sending in usbdevio on async URB completion If a process issues an URB from userspace and (starts to) terminate before the URB comes back, we run into the issue described above. This is because the urb saves a pointer to "current" when it is posted to the device, but there's no guarantee that this pointer is still valid afterwards. In fact, there are three separate issues: 1) the pointer to "current" can become invalid, since the task could be completely gone when the URB completion comes back from the device. 2) Even if the saved task pointer is still pointing to a valid task_struct, task_struct->sighand could have gone meanwhile. 3) Even if the process is perfectly fine, permissions may have changed, and we can no longer send it a signal. So what we do instead, is to save the PID and uid's of the process, and introduce a new kill_proc_info_as_uid() function. Signed-off-by: Harald Welte <laforge@gnumonks.org> [ Fixed up types and added symbol exports ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-10 17:44:29 +00:00
}
out_unlock:
signal: Fix racy access to __task_cred in kill_pid_info_as_uid() kill_pid_info_as_uid() accesses __task_cred() without being in a RCU read side critical section. tasklist_lock is not protecting that when CONFIG_TREE_PREEMPT_RCU=y. Convert the whole tasklist_lock section to rcu and use lock_task_sighand to prevent the exit race. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <20091210004703.232302055@linutronix.de> Acked-by: Oleg Nesterov <oleg@redhat.com>
2009-12-10 00:53:17 +00:00
rcu_read_unlock();
[PATCH] Fix signal sending in usbdevio on async URB completion If a process issues an URB from userspace and (starts to) terminate before the URB comes back, we run into the issue described above. This is because the urb saves a pointer to "current" when it is posted to the device, but there's no guarantee that this pointer is still valid afterwards. In fact, there are three separate issues: 1) the pointer to "current" can become invalid, since the task could be completely gone when the URB completion comes back from the device. 2) Even if the saved task pointer is still pointing to a valid task_struct, task_struct->sighand could have gone meanwhile. 3) Even if the process is perfectly fine, permissions may have changed, and we can no longer send it a signal. So what we do instead, is to save the PID and uid's of the process, and introduce a new kill_proc_info_as_uid() function. Signed-off-by: Harald Welte <laforge@gnumonks.org> [ Fixed up types and added symbol exports ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-10 17:44:29 +00:00
return ret;
}
signal/usb: Replace kill_pid_info_as_cred with kill_pid_usb_asyncio The usb support for asyncio encoded one of it's values in the wrong field. It should have used si_value but instead used si_addr which is not present in the _rt union member of struct siginfo. The practical result of this is that on a 64bit big endian kernel when delivering a signal to a 32bit process the si_addr field is set to NULL, instead of the expected pointer value. This issue can not be fixed in copy_siginfo_to_user32 as the usb usage of the the _sigfault (aka si_addr) member of the siginfo union when SI_ASYNCIO is set is incompatible with the POSIX and glibc usage of the _rt member of the siginfo union. Therefore replace kill_pid_info_as_cred with kill_pid_usb_asyncio a dedicated function for this one specific case. There are no other users of kill_pid_info_as_cred so this specialization should have no impact on the amount of code in the kernel. Have kill_pid_usb_asyncio take instead of a siginfo_t which is difficult and error prone, 3 arguments, a signal number, an errno value, and an address enconded as a sigval_t. The encoding of the address as a sigval_t allows the code that reads the userspace request for a signal to handle this compat issue along with all of the other compat issues. Add BUILD_BUG_ONs in kernel/signal.c to ensure that we can now place the pointer value at the in si_pid (instead of si_addr). That is the code now verifies that si_pid and si_addr always occur at the same location. Further the code veries that for native structures a value placed in si_pid and spilling into si_uid will appear in userspace in si_addr (on a byte by byte copy of siginfo or a field by field copy of siginfo). The code also verifies that for a 64bit kernel and a 32bit userspace the 32bit pointer will fit in si_pid. I have used the usbsig.c program below written by Alan Stern and slightly tweaked by me to run on a big endian machine to verify the issue exists (on sparc64) and to confirm the patch below fixes the issue. /* usbsig.c -- test USB async signal delivery */ #define _GNU_SOURCE #include <stdio.h> #include <fcntl.h> #include <signal.h> #include <string.h> #include <sys/ioctl.h> #include <unistd.h> #include <endian.h> #include <linux/usb/ch9.h> #include <linux/usbdevice_fs.h> static struct usbdevfs_urb urb; static struct usbdevfs_disconnectsignal ds; static volatile sig_atomic_t done = 0; void urb_handler(int sig, siginfo_t *info , void *ucontext) { printf("Got signal %d, signo %d errno %d code %d addr: %p urb: %p\n", sig, info->si_signo, info->si_errno, info->si_code, info->si_addr, &urb); printf("%s\n", (info->si_addr == &urb) ? "Good" : "Bad"); } void ds_handler(int sig, siginfo_t *info , void *ucontext) { printf("Got signal %d, signo %d errno %d code %d addr: %p ds: %p\n", sig, info->si_signo, info->si_errno, info->si_code, info->si_addr, &ds); printf("%s\n", (info->si_addr == &ds) ? "Good" : "Bad"); done = 1; } int main(int argc, char **argv) { char *devfilename; int fd; int rc; struct sigaction act; struct usb_ctrlrequest *req; void *ptr; char buf[80]; if (argc != 2) { fprintf(stderr, "Usage: usbsig device-file-name\n"); return 1; } devfilename = argv[1]; fd = open(devfilename, O_RDWR); if (fd == -1) { perror("Error opening device file"); return 1; } act.sa_sigaction = urb_handler; sigemptyset(&act.sa_mask); act.sa_flags = SA_SIGINFO; rc = sigaction(SIGUSR1, &act, NULL); if (rc == -1) { perror("Error in sigaction"); return 1; } act.sa_sigaction = ds_handler; sigemptyset(&act.sa_mask); act.sa_flags = SA_SIGINFO; rc = sigaction(SIGUSR2, &act, NULL); if (rc == -1) { perror("Error in sigaction"); return 1; } memset(&urb, 0, sizeof(urb)); urb.type = USBDEVFS_URB_TYPE_CONTROL; urb.endpoint = USB_DIR_IN | 0; urb.buffer = buf; urb.buffer_length = sizeof(buf); urb.signr = SIGUSR1; req = (struct usb_ctrlrequest *) buf; req->bRequestType = USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE; req->bRequest = USB_REQ_GET_DESCRIPTOR; req->wValue = htole16(USB_DT_DEVICE << 8); req->wIndex = htole16(0); req->wLength = htole16(sizeof(buf) - sizeof(*req)); rc = ioctl(fd, USBDEVFS_SUBMITURB, &urb); if (rc == -1) { perror("Error in SUBMITURB ioctl"); return 1; } rc = ioctl(fd, USBDEVFS_REAPURB, &ptr); if (rc == -1) { perror("Error in REAPURB ioctl"); return 1; } memset(&ds, 0, sizeof(ds)); ds.signr = SIGUSR2; ds.context = &ds; rc = ioctl(fd, USBDEVFS_DISCSIGNAL, &ds); if (rc == -1) { perror("Error in DISCSIGNAL ioctl"); return 1; } printf("Waiting for usb disconnect\n"); while (!done) { sleep(1); } close(fd); return 0; } Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Oliver Neukum <oneukum@suse.com> Fixes: v2.3.39 Cc: stable@vger.kernel.org Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-02-08 01:44:12 +00:00
EXPORT_SYMBOL_GPL(kill_pid_usb_asyncio);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* kill_something_info() interprets pid in interesting ways just like kill(2).
*
* POSIX specifies that kill(-1,sig) is unspecified, but what we have
* is probably wrong. Should make it like BSD or SYSV.
*/
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
static int kill_something_info(int sig, struct kernel_siginfo *info, pid_t pid)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
[PATCH] signal: rewrite kill_something_info so it uses newer helpers The goal is to remove users of the old signal helper functions so they can be removed. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 08:52:55 +00:00
int ret;
Clean up the kill_something_info This is the first step (of two) in removing the kill_pgrp_info. All the users of this function are in kernel/signal.c, but all they need is to call __kill_pgrp_info() with the tasklist_lock read-locked. Fortunately, one of its users is the kill_something_info(), which already needs this lock in one of its branches, so clean these branches up and call the __kill_pgrp_info() directly. Based on Oleg's view of how this function should look. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 12:19:22 +00:00
if (pid > 0) {
rcu_read_lock();
ret = kill_pid_info(sig, info, find_vpid(pid));
rcu_read_unlock();
return ret;
}
kernel/signal.c: avoid undefined behaviour in kill_something_info When running kill(72057458746458112, 0) in userspace I hit the following issue. UBSAN: Undefined behaviour in kernel/signal.c:1462:11 negation of -2147483648 cannot be represented in type 'int': CPU: 226 PID: 9849 Comm: test Tainted: G B ---- ------- 3.10.0-327.53.58.70.x86_64_ubsan+ #116 Hardware name: Huawei Technologies Co., Ltd. RH8100 V3/BC61PBIA, BIOS BLHSV028 11/11/2014 Call Trace: dump_stack+0x19/0x1b ubsan_epilogue+0xd/0x50 __ubsan_handle_negate_overflow+0x109/0x14e SYSC_kill+0x43e/0x4d0 SyS_kill+0xe/0x10 system_call_fastpath+0x16/0x1b Add code to avoid the UBSAN detection. [akpm@linux-foundation.org: tweak comment] Link: http://lkml.kernel.org/r/1496670008-59084-1-git-send-email-zhongjiang@huawei.com Signed-off-by: zhongjiang <zhongjiang@huawei.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xishi Qiu <qiuxishi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-10 22:52:57 +00:00
/* -INT_MIN is undefined. Exclude this case to avoid a UBSAN warning */
if (pid == INT_MIN)
return -ESRCH;
Clean up the kill_something_info This is the first step (of two) in removing the kill_pgrp_info. All the users of this function are in kernel/signal.c, but all they need is to call __kill_pgrp_info() with the tasklist_lock read-locked. Fortunately, one of its users is the kill_something_info(), which already needs this lock in one of its branches, so clean these branches up and call the __kill_pgrp_info() directly. Based on Oleg's view of how this function should look. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 12:19:22 +00:00
read_lock(&tasklist_lock);
if (pid != -1) {
ret = __kill_pgrp_info(sig, info,
pid ? find_vpid(-pid) : task_pgrp(current));
} else {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
int retval = 0, count = 0;
struct task_struct * p;
for_each_process(p) {
'kill sig -1' must only apply to caller's namespace Currently "kill <sig> -1" kills processes in all namespaces and breaks the isolation of namespaces. Earlier attempt to fix this was discussed at: http://lkml.org/lkml/2008/7/23/148 As suggested by Oleg Nesterov in that thread, use "task_pid_vnr() > 1" check since task_pid_vnr() returns 0 if process is outside the caller's namespace. Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Acked-by: Eric W. Biederman <ebiederm@xmission.com> Tested-by: Daniel Hokka Zakrisson <daniel@hozac.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-29 21:01:11 +00:00
if (task_pid_vnr(p) > 1 &&
!same_thread_group(p, current)) {
signal: Pass pid type into group_send_sig_info This passes the information we already have at the call sight into group_send_sig_info. Ultimatelly allowing for to better handle signals sent to a group of processes. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-07-13 23:40:57 +00:00
int err = group_send_sig_info(sig, info, p,
PIDTYPE_MAX);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
++count;
if (err != -EPERM)
retval = err;
}
}
[PATCH] signal: rewrite kill_something_info so it uses newer helpers The goal is to remove users of the old signal helper functions so they can be removed. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 08:52:55 +00:00
ret = count ? retval : -ESRCH;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
Clean up the kill_something_info This is the first step (of two) in removing the kill_pgrp_info. All the users of this function are in kernel/signal.c, but all they need is to call __kill_pgrp_info() with the tasklist_lock read-locked. Fortunately, one of its users is the kill_something_info(), which already needs this lock in one of its branches, so clean these branches up and call the __kill_pgrp_info() directly. Based on Oleg's view of how this function should look. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 12:19:22 +00:00
read_unlock(&tasklist_lock);
[PATCH] signal: rewrite kill_something_info so it uses newer helpers The goal is to remove users of the old signal helper functions so they can be removed. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 08:52:55 +00:00
return ret;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
/*
* These are for backward compatibility with the rest of the kernel source.
*/
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
int send_sig_info(int sig, struct kernel_siginfo *info, struct task_struct *p)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
/*
* Make sure legacy kernel users don't send in bad values
* (normal paths check this in check_kill_permission).
*/
[PATCH] convert that currently tests _NSIG directly to use valid_signal() Convert most of the current code that uses _NSIG directly to instead use valid_signal(). This avoids gcc -W warnings and off-by-one errors. Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 15:59:14 +00:00
if (!valid_signal(sig))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return -EINVAL;
signal: Pass pid type into do_send_sig_info This passes the information we already have at the call sight into do_send_sig_info. Ultimately allowing for better handling of signals sent to a group of processes during fork. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-07-21 15:45:15 +00:00
return do_send_sig_info(sig, info, p, PIDTYPE_PID);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
signal: Pair exports with their functions For readability and consistency with the other exports in kernel/signal.c pair the exports of signal sending functions with their functions, instead of having the exports in one big clump. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-13 17:26:35 +00:00
EXPORT_SYMBOL(send_sig_info);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[PATCH] remove hardcoded SEND_SIG_xxx constants This patch replaces hardcoded SEND_SIG_xxx constants with their symbolic names. No changes in affected .o files. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 23:03:44 +00:00
#define __si_special(priv) \
((priv) ? SEND_SIG_PRIV : SEND_SIG_NOINFO)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
int
send_sig(int sig, struct task_struct *p, int priv)
{
[PATCH] remove hardcoded SEND_SIG_xxx constants This patch replaces hardcoded SEND_SIG_xxx constants with their symbolic names. No changes in affected .o files. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 23:03:44 +00:00
return send_sig_info(sig, __si_special(priv), p);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
signal: Pair exports with their functions For readability and consistency with the other exports in kernel/signal.c pair the exports of signal sending functions with their functions, instead of having the exports in one big clump. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-13 17:26:35 +00:00
EXPORT_SYMBOL(send_sig);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
signal: Remove task parameter from force_sig All of the remaining callers pass current into force_sig so remove the task parameter to make this obvious and to make misuse more difficult in the future. This also makes it clear force_sig passes current into force_sig_info. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-23 15:17:27 +00:00
void force_sig(int sig)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
signal: Generate the siginfo in force_sig In preparation for removing the special case in force_sig_info for only having a signal number generate an appropriate siginfo in force_sig the last caller of force_sig_info that does not pass a filled out siginfo. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-15 00:17:47 +00:00
struct kernel_siginfo info;
clear_siginfo(&info);
info.si_signo = sig;
info.si_errno = 0;
info.si_code = SI_KERNEL;
info.si_pid = 0;
info.si_uid = 0;
signal: Remove the signal number and task parameters from force_sig_info force_sig_info always delivers to the current task and the signal parameter always matches info.si_signo. So remove those parameters to make it a simpler less error prone interface, and to make it clear that none of the callers are doing anything clever. This guarantees that force_sig_info will not grow any new buggy callers that attempt to call force_sig on a non-current task, or that pass an signal number that does not match info.si_signo. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-15 15:11:09 +00:00
force_sig_info(&info);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
signal: Pair exports with their functions For readability and consistency with the other exports in kernel/signal.c pair the exports of signal sending functions with their functions, instead of having the exports in one big clump. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-13 17:26:35 +00:00
EXPORT_SYMBOL(force_sig);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* When things go south during signal handling, we
* will force a SIGSEGV. And if the signal that caused
* the problem was already a SIGSEGV, we'll want to
* make sure we don't even try to deliver the signal..
*/
signal: Remove task parameter from force_sigsegv The function force_sigsegv is always called on the current task so passing in current is redundant and not passing in current makes this fact obvious. This also makes it clear force_sigsegv always calls force_sig on the current task. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-21 15:03:48 +00:00
void force_sigsegv(int sig)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
signal: Remove task parameter from force_sigsegv The function force_sigsegv is always called on the current task so passing in current is redundant and not passing in current makes this fact obvious. This also makes it clear force_sigsegv always calls force_sig on the current task. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-21 15:03:48 +00:00
struct task_struct *p = current;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (sig == SIGSEGV) {
unsigned long flags;
spin_lock_irqsave(&p->sighand->siglock, flags);
p->sighand->action[sig - 1].sa.sa_handler = SIG_DFL;
spin_unlock_irqrestore(&p->sighand->siglock, flags);
}
signal: Remove task parameter from force_sig All of the remaining callers pass current into force_sig so remove the task parameter to make this obvious and to make misuse more difficult in the future. This also makes it clear force_sig passes current into force_sig_info. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-23 15:17:27 +00:00
force_sig(SIGSEGV);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
signal: Use force_sig_fault_to_task for the two calls that don't deliver to current In preparation for removing the task parameter from force_sig_fault introduce force_sig_fault_to_task and use it for the two cases where it matters. On mips force_fcr31_sig calls force_sig_fault and is called on either the current task, or a task that is suspended and is being switched to by the scheduler. This is safe because the task being switched to by the scheduler is guaranteed to be suspended. This ensures that task->sighand is stable while the signal is delivered to it. On parisc user_enable_single_step calls force_sig_fault and is in turn called by ptrace_request. The function ptrace_request always calls user_enable_single_step on a child that is stopped for tracing. The child being traced and not reaped ensures that child->sighand is not NULL, and that the child will not change child->sighand. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-02-06 22:39:13 +00:00
int force_sig_fault_to_task(int sig, int code, void __user *addr
signal: Add send_sig_fault and force_sig_fault The vast majority of signals sent from architecture specific code are simple faults. Encapsulate this reality with two helper functions so that the nit-picky implementation of preparing a siginfo does not need to be repeated many times on each architecture. As only some architectures support the trapno field, make the trapno arguement only present on those architectures. Similary as ia64 has three fields: imm, flags, and isr that are specific to it. Have those arguments always present on ia64 and no where else. This ensures the architecture specific code always remembers which fields it needs to pass into the siginfo structure. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-18 20:54:54 +00:00
___ARCH_SI_TRAPNO(int trapno)
___ARCH_SI_IA64(int imm, unsigned int flags, unsigned long isr)
, struct task_struct *t)
{
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
struct kernel_siginfo info;
signal: Add send_sig_fault and force_sig_fault The vast majority of signals sent from architecture specific code are simple faults. Encapsulate this reality with two helper functions so that the nit-picky implementation of preparing a siginfo does not need to be repeated many times on each architecture. As only some architectures support the trapno field, make the trapno arguement only present on those architectures. Similary as ia64 has three fields: imm, flags, and isr that are specific to it. Have those arguments always present on ia64 and no where else. This ensures the architecture specific code always remembers which fields it needs to pass into the siginfo structure. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-18 20:54:54 +00:00
clear_siginfo(&info);
info.si_signo = sig;
info.si_errno = 0;
info.si_code = code;
info.si_addr = addr;
#ifdef __ARCH_SI_TRAPNO
info.si_trapno = trapno;
#endif
#ifdef __ia64__
info.si_imm = imm;
info.si_flags = flags;
info.si_isr = isr;
#endif
signal: Factor force_sig_info_to_task out of force_sig_info All callers of force_sig_info pass info.si_signo in for the signal by definition as well as in practice. Further all callers of force_sig_info except force_sig_fault_to_task pass current as the target task to force_sig_info. Factor out a static force_sig_info_to_task that force_sig_fault_to_task can call. This prepares the way for force_sig_info to have it's task and signal parameters removed. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-02-07 17:01:20 +00:00
return force_sig_info_to_task(&info, t);
signal: Add send_sig_fault and force_sig_fault The vast majority of signals sent from architecture specific code are simple faults. Encapsulate this reality with two helper functions so that the nit-picky implementation of preparing a siginfo does not need to be repeated many times on each architecture. As only some architectures support the trapno field, make the trapno arguement only present on those architectures. Similary as ia64 has three fields: imm, flags, and isr that are specific to it. Have those arguments always present on ia64 and no where else. This ensures the architecture specific code always remembers which fields it needs to pass into the siginfo structure. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-18 20:54:54 +00:00
}
signal: Use force_sig_fault_to_task for the two calls that don't deliver to current In preparation for removing the task parameter from force_sig_fault introduce force_sig_fault_to_task and use it for the two cases where it matters. On mips force_fcr31_sig calls force_sig_fault and is called on either the current task, or a task that is suspended and is being switched to by the scheduler. This is safe because the task being switched to by the scheduler is guaranteed to be suspended. This ensures that task->sighand is stable while the signal is delivered to it. On parisc user_enable_single_step calls force_sig_fault and is in turn called by ptrace_request. The function ptrace_request always calls user_enable_single_step on a child that is stopped for tracing. The child being traced and not reaped ensures that child->sighand is not NULL, and that the child will not change child->sighand. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-02-06 22:39:13 +00:00
int force_sig_fault(int sig, int code, void __user *addr
___ARCH_SI_TRAPNO(int trapno)
signal: Remove the task parameter from force_sig_fault As synchronous exceptions really only make sense against the current task (otherwise how are you synchronous) remove the task parameter from from force_sig_fault to make it explicit that is what is going on. The two known exceptions that deliver a synchronous exception to a stopped ptraced task have already been changed to force_sig_fault_to_task. The callers have been changed with the following emacs regular expression (with obvious variations on the architectures that take more arguments) to avoid typos: force_sig_fault[(]\([^,]+\)[,]\([^,]+\)[,]\([^,]+\)[,]\W+current[)] -> force_sig_fault(\1,\2,\3) Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-23 16:04:24 +00:00
___ARCH_SI_IA64(int imm, unsigned int flags, unsigned long isr))
signal: Use force_sig_fault_to_task for the two calls that don't deliver to current In preparation for removing the task parameter from force_sig_fault introduce force_sig_fault_to_task and use it for the two cases where it matters. On mips force_fcr31_sig calls force_sig_fault and is called on either the current task, or a task that is suspended and is being switched to by the scheduler. This is safe because the task being switched to by the scheduler is guaranteed to be suspended. This ensures that task->sighand is stable while the signal is delivered to it. On parisc user_enable_single_step calls force_sig_fault and is in turn called by ptrace_request. The function ptrace_request always calls user_enable_single_step on a child that is stopped for tracing. The child being traced and not reaped ensures that child->sighand is not NULL, and that the child will not change child->sighand. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-02-06 22:39:13 +00:00
{
return force_sig_fault_to_task(sig, code, addr
___ARCH_SI_TRAPNO(trapno)
signal: Remove the task parameter from force_sig_fault As synchronous exceptions really only make sense against the current task (otherwise how are you synchronous) remove the task parameter from from force_sig_fault to make it explicit that is what is going on. The two known exceptions that deliver a synchronous exception to a stopped ptraced task have already been changed to force_sig_fault_to_task. The callers have been changed with the following emacs regular expression (with obvious variations on the architectures that take more arguments) to avoid typos: force_sig_fault[(]\([^,]+\)[,]\([^,]+\)[,]\([^,]+\)[,]\W+current[)] -> force_sig_fault(\1,\2,\3) Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-23 16:04:24 +00:00
___ARCH_SI_IA64(imm, flags, isr), current);
signal: Add send_sig_fault and force_sig_fault The vast majority of signals sent from architecture specific code are simple faults. Encapsulate this reality with two helper functions so that the nit-picky implementation of preparing a siginfo does not need to be repeated many times on each architecture. As only some architectures support the trapno field, make the trapno arguement only present on those architectures. Similary as ia64 has three fields: imm, flags, and isr that are specific to it. Have those arguments always present on ia64 and no where else. This ensures the architecture specific code always remembers which fields it needs to pass into the siginfo structure. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-18 20:54:54 +00:00
}
int send_sig_fault(int sig, int code, void __user *addr
___ARCH_SI_TRAPNO(int trapno)
___ARCH_SI_IA64(int imm, unsigned int flags, unsigned long isr)
, struct task_struct *t)
{
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
struct kernel_siginfo info;
signal: Add send_sig_fault and force_sig_fault The vast majority of signals sent from architecture specific code are simple faults. Encapsulate this reality with two helper functions so that the nit-picky implementation of preparing a siginfo does not need to be repeated many times on each architecture. As only some architectures support the trapno field, make the trapno arguement only present on those architectures. Similary as ia64 has three fields: imm, flags, and isr that are specific to it. Have those arguments always present on ia64 and no where else. This ensures the architecture specific code always remembers which fields it needs to pass into the siginfo structure. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-18 20:54:54 +00:00
clear_siginfo(&info);
info.si_signo = sig;
info.si_errno = 0;
info.si_code = code;
info.si_addr = addr;
#ifdef __ARCH_SI_TRAPNO
info.si_trapno = trapno;
#endif
#ifdef __ia64__
info.si_imm = imm;
info.si_flags = flags;
info.si_isr = isr;
#endif
return send_sig_info(info.si_signo, &info, t);
}
signal: Remove task parameter from force_sig_mceerr All of the callers pass current into force_sig_mceer so remove the task parameter to make this obvious. This also makes it clear that force_sig_mceerr passes current into force_sig_info. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-02-06 00:14:19 +00:00
int force_sig_mceerr(int code, void __user *addr, short lsb)
signal: Helpers for faults with specialized siginfo layouts The helpers added are: send_sig_mceerr force_sig_mceerr force_sig_bnderr force_sig_pkuerr Filling out siginfo properly can ge tricky. Especially for these specialized cases where the temptation is to share code with other cases which use a different subset of siginfo fields. Unfortunately that code sharing frequently results in bugs with the wrong siginfo fields filled in, and makes it harder to verify that the siginfo structure was properly initialized. Provide these helpers instead that get all of the details right, and guarantee that siginfo is properly initialized. send_sig_mceerr and force_sig_mceer are a little special as two si codes BUS_MCEERR_AO and BUS_MCEER_AR both use the same extended signinfo layout. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-19 00:54:31 +00:00
{
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
struct kernel_siginfo info;
signal: Helpers for faults with specialized siginfo layouts The helpers added are: send_sig_mceerr force_sig_mceerr force_sig_bnderr force_sig_pkuerr Filling out siginfo properly can ge tricky. Especially for these specialized cases where the temptation is to share code with other cases which use a different subset of siginfo fields. Unfortunately that code sharing frequently results in bugs with the wrong siginfo fields filled in, and makes it harder to verify that the siginfo structure was properly initialized. Provide these helpers instead that get all of the details right, and guarantee that siginfo is properly initialized. send_sig_mceerr and force_sig_mceer are a little special as two si codes BUS_MCEERR_AO and BUS_MCEER_AR both use the same extended signinfo layout. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-19 00:54:31 +00:00
WARN_ON((code != BUS_MCEERR_AO) && (code != BUS_MCEERR_AR));
clear_siginfo(&info);
info.si_signo = SIGBUS;
info.si_errno = 0;
info.si_code = code;
info.si_addr = addr;
info.si_addr_lsb = lsb;
signal: Remove the signal number and task parameters from force_sig_info force_sig_info always delivers to the current task and the signal parameter always matches info.si_signo. So remove those parameters to make it a simpler less error prone interface, and to make it clear that none of the callers are doing anything clever. This guarantees that force_sig_info will not grow any new buggy callers that attempt to call force_sig on a non-current task, or that pass an signal number that does not match info.si_signo. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-15 15:11:09 +00:00
return force_sig_info(&info);
signal: Helpers for faults with specialized siginfo layouts The helpers added are: send_sig_mceerr force_sig_mceerr force_sig_bnderr force_sig_pkuerr Filling out siginfo properly can ge tricky. Especially for these specialized cases where the temptation is to share code with other cases which use a different subset of siginfo fields. Unfortunately that code sharing frequently results in bugs with the wrong siginfo fields filled in, and makes it harder to verify that the siginfo structure was properly initialized. Provide these helpers instead that get all of the details right, and guarantee that siginfo is properly initialized. send_sig_mceerr and force_sig_mceer are a little special as two si codes BUS_MCEERR_AO and BUS_MCEER_AR both use the same extended signinfo layout. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-19 00:54:31 +00:00
}
int send_sig_mceerr(int code, void __user *addr, short lsb, struct task_struct *t)
{
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
struct kernel_siginfo info;
signal: Helpers for faults with specialized siginfo layouts The helpers added are: send_sig_mceerr force_sig_mceerr force_sig_bnderr force_sig_pkuerr Filling out siginfo properly can ge tricky. Especially for these specialized cases where the temptation is to share code with other cases which use a different subset of siginfo fields. Unfortunately that code sharing frequently results in bugs with the wrong siginfo fields filled in, and makes it harder to verify that the siginfo structure was properly initialized. Provide these helpers instead that get all of the details right, and guarantee that siginfo is properly initialized. send_sig_mceerr and force_sig_mceer are a little special as two si codes BUS_MCEERR_AO and BUS_MCEER_AR both use the same extended signinfo layout. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-19 00:54:31 +00:00
WARN_ON((code != BUS_MCEERR_AO) && (code != BUS_MCEERR_AR));
clear_siginfo(&info);
info.si_signo = SIGBUS;
info.si_errno = 0;
info.si_code = code;
info.si_addr = addr;
info.si_addr_lsb = lsb;
return send_sig_info(info.si_signo, &info, t);
}
EXPORT_SYMBOL(send_sig_mceerr);
int force_sig_bnderr(void __user *addr, void __user *lower, void __user *upper)
{
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
struct kernel_siginfo info;
signal: Helpers for faults with specialized siginfo layouts The helpers added are: send_sig_mceerr force_sig_mceerr force_sig_bnderr force_sig_pkuerr Filling out siginfo properly can ge tricky. Especially for these specialized cases where the temptation is to share code with other cases which use a different subset of siginfo fields. Unfortunately that code sharing frequently results in bugs with the wrong siginfo fields filled in, and makes it harder to verify that the siginfo structure was properly initialized. Provide these helpers instead that get all of the details right, and guarantee that siginfo is properly initialized. send_sig_mceerr and force_sig_mceer are a little special as two si codes BUS_MCEERR_AO and BUS_MCEER_AR both use the same extended signinfo layout. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-19 00:54:31 +00:00
clear_siginfo(&info);
info.si_signo = SIGSEGV;
info.si_errno = 0;
info.si_code = SEGV_BNDERR;
info.si_addr = addr;
info.si_lower = lower;
info.si_upper = upper;
signal: Remove the signal number and task parameters from force_sig_info force_sig_info always delivers to the current task and the signal parameter always matches info.si_signo. So remove those parameters to make it a simpler less error prone interface, and to make it clear that none of the callers are doing anything clever. This guarantees that force_sig_info will not grow any new buggy callers that attempt to call force_sig on a non-current task, or that pass an signal number that does not match info.si_signo. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-15 15:11:09 +00:00
return force_sig_info(&info);
signal: Helpers for faults with specialized siginfo layouts The helpers added are: send_sig_mceerr force_sig_mceerr force_sig_bnderr force_sig_pkuerr Filling out siginfo properly can ge tricky. Especially for these specialized cases where the temptation is to share code with other cases which use a different subset of siginfo fields. Unfortunately that code sharing frequently results in bugs with the wrong siginfo fields filled in, and makes it harder to verify that the siginfo structure was properly initialized. Provide these helpers instead that get all of the details right, and guarantee that siginfo is properly initialized. send_sig_mceerr and force_sig_mceer are a little special as two si codes BUS_MCEERR_AO and BUS_MCEER_AR both use the same extended signinfo layout. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-19 00:54:31 +00:00
}
#ifdef SEGV_PKUERR
int force_sig_pkuerr(void __user *addr, u32 pkey)
{
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
struct kernel_siginfo info;
signal: Helpers for faults with specialized siginfo layouts The helpers added are: send_sig_mceerr force_sig_mceerr force_sig_bnderr force_sig_pkuerr Filling out siginfo properly can ge tricky. Especially for these specialized cases where the temptation is to share code with other cases which use a different subset of siginfo fields. Unfortunately that code sharing frequently results in bugs with the wrong siginfo fields filled in, and makes it harder to verify that the siginfo structure was properly initialized. Provide these helpers instead that get all of the details right, and guarantee that siginfo is properly initialized. send_sig_mceerr and force_sig_mceer are a little special as two si codes BUS_MCEERR_AO and BUS_MCEER_AR both use the same extended signinfo layout. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-19 00:54:31 +00:00
clear_siginfo(&info);
info.si_signo = SIGSEGV;
info.si_errno = 0;
info.si_code = SEGV_PKUERR;
info.si_addr = addr;
info.si_pkey = pkey;
signal: Remove the signal number and task parameters from force_sig_info force_sig_info always delivers to the current task and the signal parameter always matches info.si_signo. So remove those parameters to make it a simpler less error prone interface, and to make it clear that none of the callers are doing anything clever. This guarantees that force_sig_info will not grow any new buggy callers that attempt to call force_sig on a non-current task, or that pass an signal number that does not match info.si_signo. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-15 15:11:09 +00:00
return force_sig_info(&info);
signal: Helpers for faults with specialized siginfo layouts The helpers added are: send_sig_mceerr force_sig_mceerr force_sig_bnderr force_sig_pkuerr Filling out siginfo properly can ge tricky. Especially for these specialized cases where the temptation is to share code with other cases which use a different subset of siginfo fields. Unfortunately that code sharing frequently results in bugs with the wrong siginfo fields filled in, and makes it harder to verify that the siginfo structure was properly initialized. Provide these helpers instead that get all of the details right, and guarantee that siginfo is properly initialized. send_sig_mceerr and force_sig_mceer are a little special as two si codes BUS_MCEERR_AO and BUS_MCEER_AR both use the same extended signinfo layout. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-19 00:54:31 +00:00
}
#endif
signal: Add send_sig_fault and force_sig_fault The vast majority of signals sent from architecture specific code are simple faults. Encapsulate this reality with two helper functions so that the nit-picky implementation of preparing a siginfo does not need to be repeated many times on each architecture. As only some architectures support the trapno field, make the trapno arguement only present on those architectures. Similary as ia64 has three fields: imm, flags, and isr that are specific to it. Have those arguments always present on ia64 and no where else. This ensures the architecture specific code always remembers which fields it needs to pass into the siginfo structure. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-18 20:54:54 +00:00
signal/ptrace: Add force_sig_ptrace_errno_trap and use it where needed There are so many places that build struct siginfo by hand that at least one of them is bound to get it wrong. A handful of cases in the kernel arguably did just that when using the errno field of siginfo to pass no errno values to userspace. The usage is limited to a single si_code so at least does not mess up anything else. Encapsulate this questionable pattern in a helper function so that the userspace ABI is preserved. Update all of the places that use this pattern to use the new helper function. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-22 20:37:25 +00:00
/* For the crazy architectures that include trap information in
* the errno field, instead of an actual errno value.
*/
int force_sig_ptrace_errno_trap(int errno, void __user *addr)
{
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
struct kernel_siginfo info;
signal/ptrace: Add force_sig_ptrace_errno_trap and use it where needed There are so many places that build struct siginfo by hand that at least one of them is bound to get it wrong. A handful of cases in the kernel arguably did just that when using the errno field of siginfo to pass no errno values to userspace. The usage is limited to a single si_code so at least does not mess up anything else. Encapsulate this questionable pattern in a helper function so that the userspace ABI is preserved. Update all of the places that use this pattern to use the new helper function. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-22 20:37:25 +00:00
clear_siginfo(&info);
info.si_signo = SIGTRAP;
info.si_errno = errno;
info.si_code = TRAP_HWBKPT;
info.si_addr = addr;
signal: Remove the signal number and task parameters from force_sig_info force_sig_info always delivers to the current task and the signal parameter always matches info.si_signo. So remove those parameters to make it a simpler less error prone interface, and to make it clear that none of the callers are doing anything clever. This guarantees that force_sig_info will not grow any new buggy callers that attempt to call force_sig on a non-current task, or that pass an signal number that does not match info.si_signo. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-15 15:11:09 +00:00
return force_sig_info(&info);
signal/ptrace: Add force_sig_ptrace_errno_trap and use it where needed There are so many places that build struct siginfo by hand that at least one of them is bound to get it wrong. A handful of cases in the kernel arguably did just that when using the errno field of siginfo to pass no errno values to userspace. The usage is limited to a single si_code so at least does not mess up anything else. Encapsulate this questionable pattern in a helper function so that the userspace ABI is preserved. Update all of the places that use this pattern to use the new helper function. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-22 20:37:25 +00:00
}
[PATCH] pid: implement signal functions that take a struct pid * Currently the signal functions all either take a task or a pid_t argument. This patch implements variants that take a struct pid *. After all of the users have been update it is my intention to remove the variants that take a pid_t as using pid_t can be more work (an extra hash table lookup) and difficult to get right in the presence of multiple pid namespaces. There are two kinds of functions introduced in this patch. The are the general use functions kill_pgrp and kill_pid which take a priv argument that is ultimately used to create the appropriate siginfo information, Then there are _kill_pgrp_info, kill_pgrp_info, kill_pid_info the internal implementation helpers that take an explicit siginfo. The distinction is made because filling out an explcit siginfo is tricky, and will be even more tricky when pid namespaces are introduced. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 09:17:10 +00:00
int kill_pgrp(struct pid *pid, int sig, int priv)
{
Get rid of the kill_pgrp_info() function There's only one caller left - the kill_pgrp one - so merge these two functions and forget the kill_pgrp_info one. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Reviewed-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 12:19:22 +00:00
int ret;
read_lock(&tasklist_lock);
ret = __kill_pgrp_info(sig, __si_special(priv), pid);
read_unlock(&tasklist_lock);
return ret;
[PATCH] pid: implement signal functions that take a struct pid * Currently the signal functions all either take a task or a pid_t argument. This patch implements variants that take a struct pid *. After all of the users have been update it is my intention to remove the variants that take a pid_t as using pid_t can be more work (an extra hash table lookup) and difficult to get right in the presence of multiple pid namespaces. There are two kinds of functions introduced in this patch. The are the general use functions kill_pgrp and kill_pid which take a priv argument that is ultimately used to create the appropriate siginfo information, Then there are _kill_pgrp_info, kill_pgrp_info, kill_pid_info the internal implementation helpers that take an explicit siginfo. The distinction is made because filling out an explcit siginfo is tricky, and will be even more tricky when pid namespaces are introduced. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 09:17:10 +00:00
}
EXPORT_SYMBOL(kill_pgrp);
int kill_pid(struct pid *pid, int sig, int priv)
{
return kill_pid_info(sig, __si_special(priv), pid);
}
EXPORT_SYMBOL(kill_pid);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* These functions support sending signals using preallocated sigqueue
* structures. This is needed "because realtime applications cannot
* afford to lose notifications of asynchronous events, like timer
kernel/signal.c: fix typos and coding style General coding style and comment fixes; no code changes: - Use multi-line-comment coding style. - Put some function signatures completely on one line. - Hyphenate some words. - Spell Posix as POSIX. - Correct typos & spellos in some comments. - Drop trailing whitespace. - End sentences with periods. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-04 21:59:31 +00:00
* expirations or I/O completions". In the case of POSIX Timers
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
* we allocate the sigqueue structure from the timer_create. If this
* allocation fails we are able to report the failure to the application
* with an EAGAIN error.
*/
struct sigqueue *sigqueue_alloc(void)
{
signal: Print warning message when dropping signals When the system has too many timers or too many aggregate queued signals, the EAGAIN error is returned to application from kernel, including timer_create() [POSIX.1b]. It means that the app exceeded the limit of pending signals, but in general application writers do not expect this outcome and the current silent failure can cause rare app failures under very high load. This patch adds a new message when we reach the limit and if print_fatal_signals is enabled: task/1234: reached RLIMIT_SIGPENDING, dropping signal If you see this message and your system behaved unexpectedly, you can run following command to lift the limit: # ulimit -i unlimited With help from Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>. Signed-off-by: Naohiro Ooiwa <nooiwa@miraclelinux.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Cc: Roland McGrath <roland@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: oleg@redhat.com LKML-Reference: <4AF6E7E2.9080406@miraclelinux.com> [ Modified a few small details, gave surrounding code some love. ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-08 15:46:42 +00:00
struct sigqueue *q = __sigqueue_alloc(-1, current, GFP_KERNEL, 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
signal: Print warning message when dropping signals When the system has too many timers or too many aggregate queued signals, the EAGAIN error is returned to application from kernel, including timer_create() [POSIX.1b]. It means that the app exceeded the limit of pending signals, but in general application writers do not expect this outcome and the current silent failure can cause rare app failures under very high load. This patch adds a new message when we reach the limit and if print_fatal_signals is enabled: task/1234: reached RLIMIT_SIGPENDING, dropping signal If you see this message and your system behaved unexpectedly, you can run following command to lift the limit: # ulimit -i unlimited With help from Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>. Signed-off-by: Naohiro Ooiwa <nooiwa@miraclelinux.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Cc: Roland McGrath <roland@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: oleg@redhat.com LKML-Reference: <4AF6E7E2.9080406@miraclelinux.com> [ Modified a few small details, gave surrounding code some love. ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-08 15:46:42 +00:00
if (q)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
q->flags |= SIGQUEUE_PREALLOC;
signal: Print warning message when dropping signals When the system has too many timers or too many aggregate queued signals, the EAGAIN error is returned to application from kernel, including timer_create() [POSIX.1b]. It means that the app exceeded the limit of pending signals, but in general application writers do not expect this outcome and the current silent failure can cause rare app failures under very high load. This patch adds a new message when we reach the limit and if print_fatal_signals is enabled: task/1234: reached RLIMIT_SIGPENDING, dropping signal If you see this message and your system behaved unexpectedly, you can run following command to lift the limit: # ulimit -i unlimited With help from Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>. Signed-off-by: Naohiro Ooiwa <nooiwa@miraclelinux.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Cc: Roland McGrath <roland@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: oleg@redhat.com LKML-Reference: <4AF6E7E2.9080406@miraclelinux.com> [ Modified a few small details, gave surrounding code some love. ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-08 15:46:42 +00:00
return q;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
void sigqueue_free(struct sigqueue *q)
{
unsigned long flags;
sigqueue_free: fix the race with collect_signal() Spotted by taoyue <yue.tao@windriver.com> and Jeremy Katz <jeremy.katz@windriver.com>. collect_signal: sigqueue_free: list_del_init(&first->list); if (!list_empty(&q->list)) { // not taken } q->flags &= ~SIGQUEUE_PREALLOC; __sigqueue_free(first); __sigqueue_free(q); Now, __sigqueue_free() is called twice on the same "struct sigqueue" with the obviously bad implications. In particular, this double free breaks the array_cache->avail logic, so the same sigqueue could be "allocated" twice, and the bug can manifest itself via the "impossible" BUG_ON(!SIGQUEUE_PREALLOC) in sigqueue_free/send_sigqueue. Hopefully this can explain these mysterious bug-reports, see http://marc.info/?t=118766926500003 http://marc.info/?t=118466273000005 Alexey Dobriyan reports this patch makes the difference for the testcase, but nobody has an access to the application which opened the problems originally. Also, this patch removes tasklist lock/unlock, ->siglock is enough. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: taoyue <yue.tao@windriver.com> Cc: Jeremy Katz <jeremy.katz@windriver.com> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Roland McGrath <roland@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-31 06:56:35 +00:00
spinlock_t *lock = &current->sighand->siglock;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
BUG_ON(!(q->flags & SIGQUEUE_PREALLOC));
/*
posix timers: sigqueue_free: don't free sigqueue if it is queued Currently sigqueue_free() removes sigqueue from list, but doesn't cancel the pending signal. This is not consistent, the task should either receive the "full" signal along with siginfo_t, or it shouldn't receive the signal at all. Change sigqueue_free() to clear SIGQUEUE_PREALLOC but leave sigqueue on list if it is queued. This is a user-visible change. If the signal is blocked, it stays queued after sys_timer_delete() until unblocked with the "stale" si_code/si_value, and of course it is still counted wrt RLIMIT_SIGPENDING which also limits the number of posix timers. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Austin Clements <amdragon+kernelbugzilla@mit.edu> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-26 16:55:42 +00:00
* We must hold ->siglock while testing q->list
* to serialize with collect_signal() or with
signals: fix sigqueue_free() vs __exit_signal() race __exit_signal() does flush_sigqueue(tsk->pending) outside of ->siglock. This can race with another thread doing sigqueue_free(), we can free the same SIGQUEUE_PREALLOC sigqueue twice or corrupt the pending->list. Note that even sys_exit_group() can trigger this race, not only sys_timer_delete(). Move the callsite of flush_sigqueue(tsk->pending) under ->siglock. This patch doesn't touch flush_sigqueue(->shared_pending) below, it is called when there are no other threads which can play with signals, and sigqueue_free() can't be used outside of our thread group. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-23 20:04:41 +00:00
* __exit_signal()->flush_sigqueue().
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
sigqueue_free: fix the race with collect_signal() Spotted by taoyue <yue.tao@windriver.com> and Jeremy Katz <jeremy.katz@windriver.com>. collect_signal: sigqueue_free: list_del_init(&first->list); if (!list_empty(&q->list)) { // not taken } q->flags &= ~SIGQUEUE_PREALLOC; __sigqueue_free(first); __sigqueue_free(q); Now, __sigqueue_free() is called twice on the same "struct sigqueue" with the obviously bad implications. In particular, this double free breaks the array_cache->avail logic, so the same sigqueue could be "allocated" twice, and the bug can manifest itself via the "impossible" BUG_ON(!SIGQUEUE_PREALLOC) in sigqueue_free/send_sigqueue. Hopefully this can explain these mysterious bug-reports, see http://marc.info/?t=118766926500003 http://marc.info/?t=118466273000005 Alexey Dobriyan reports this patch makes the difference for the testcase, but nobody has an access to the application which opened the problems originally. Also, this patch removes tasklist lock/unlock, ->siglock is enough. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: taoyue <yue.tao@windriver.com> Cc: Jeremy Katz <jeremy.katz@windriver.com> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Roland McGrath <roland@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-31 06:56:35 +00:00
spin_lock_irqsave(lock, flags);
posix timers: sigqueue_free: don't free sigqueue if it is queued Currently sigqueue_free() removes sigqueue from list, but doesn't cancel the pending signal. This is not consistent, the task should either receive the "full" signal along with siginfo_t, or it shouldn't receive the signal at all. Change sigqueue_free() to clear SIGQUEUE_PREALLOC but leave sigqueue on list if it is queued. This is a user-visible change. If the signal is blocked, it stays queued after sys_timer_delete() until unblocked with the "stale" si_code/si_value, and of course it is still counted wrt RLIMIT_SIGPENDING which also limits the number of posix timers. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Austin Clements <amdragon+kernelbugzilla@mit.edu> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-26 16:55:42 +00:00
q->flags &= ~SIGQUEUE_PREALLOC;
/*
* If it is queued it will be freed when dequeued,
* like the "regular" sigqueue.
*/
sigqueue_free: fix the race with collect_signal() Spotted by taoyue <yue.tao@windriver.com> and Jeremy Katz <jeremy.katz@windriver.com>. collect_signal: sigqueue_free: list_del_init(&first->list); if (!list_empty(&q->list)) { // not taken } q->flags &= ~SIGQUEUE_PREALLOC; __sigqueue_free(first); __sigqueue_free(q); Now, __sigqueue_free() is called twice on the same "struct sigqueue" with the obviously bad implications. In particular, this double free breaks the array_cache->avail logic, so the same sigqueue could be "allocated" twice, and the bug can manifest itself via the "impossible" BUG_ON(!SIGQUEUE_PREALLOC) in sigqueue_free/send_sigqueue. Hopefully this can explain these mysterious bug-reports, see http://marc.info/?t=118766926500003 http://marc.info/?t=118466273000005 Alexey Dobriyan reports this patch makes the difference for the testcase, but nobody has an access to the application which opened the problems originally. Also, this patch removes tasklist lock/unlock, ->siglock is enough. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: taoyue <yue.tao@windriver.com> Cc: Jeremy Katz <jeremy.katz@windriver.com> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Roland McGrath <roland@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-31 06:56:35 +00:00
if (!list_empty(&q->list))
posix timers: sigqueue_free: don't free sigqueue if it is queued Currently sigqueue_free() removes sigqueue from list, but doesn't cancel the pending signal. This is not consistent, the task should either receive the "full" signal along with siginfo_t, or it shouldn't receive the signal at all. Change sigqueue_free() to clear SIGQUEUE_PREALLOC but leave sigqueue on list if it is queued. This is a user-visible change. If the signal is blocked, it stays queued after sys_timer_delete() until unblocked with the "stale" si_code/si_value, and of course it is still counted wrt RLIMIT_SIGPENDING which also limits the number of posix timers. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Austin Clements <amdragon+kernelbugzilla@mit.edu> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-26 16:55:42 +00:00
q = NULL;
sigqueue_free: fix the race with collect_signal() Spotted by taoyue <yue.tao@windriver.com> and Jeremy Katz <jeremy.katz@windriver.com>. collect_signal: sigqueue_free: list_del_init(&first->list); if (!list_empty(&q->list)) { // not taken } q->flags &= ~SIGQUEUE_PREALLOC; __sigqueue_free(first); __sigqueue_free(q); Now, __sigqueue_free() is called twice on the same "struct sigqueue" with the obviously bad implications. In particular, this double free breaks the array_cache->avail logic, so the same sigqueue could be "allocated" twice, and the bug can manifest itself via the "impossible" BUG_ON(!SIGQUEUE_PREALLOC) in sigqueue_free/send_sigqueue. Hopefully this can explain these mysterious bug-reports, see http://marc.info/?t=118766926500003 http://marc.info/?t=118466273000005 Alexey Dobriyan reports this patch makes the difference for the testcase, but nobody has an access to the application which opened the problems originally. Also, this patch removes tasklist lock/unlock, ->siglock is enough. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: taoyue <yue.tao@windriver.com> Cc: Jeremy Katz <jeremy.katz@windriver.com> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Roland McGrath <roland@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-31 06:56:35 +00:00
spin_unlock_irqrestore(lock, flags);
posix timers: sigqueue_free: don't free sigqueue if it is queued Currently sigqueue_free() removes sigqueue from list, but doesn't cancel the pending signal. This is not consistent, the task should either receive the "full" signal along with siginfo_t, or it shouldn't receive the signal at all. Change sigqueue_free() to clear SIGQUEUE_PREALLOC but leave sigqueue on list if it is queued. This is a user-visible change. If the signal is blocked, it stays queued after sys_timer_delete() until unblocked with the "stale" si_code/si_value, and of course it is still counted wrt RLIMIT_SIGPENDING which also limits the number of posix timers. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Austin Clements <amdragon+kernelbugzilla@mit.edu> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-26 16:55:42 +00:00
if (q)
__sigqueue_free(q);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
signal: Pass pid and pid type into send_sigqueue Make the code more maintainable by performing more of the signal related work in send_sigqueue. A quick inspection of do_timer_create will show that this code path does not lookup a thread group by a thread's pid. Making it safe to find the task pointed to by it_pid with "pid_task(it_pid, type)"; This supports the changes needed in fork to tell if a signal was sent to a single process or a group of processes. Having the pid to task transition in signal.c will also make it easier to sort out races with de_thread and and the thread group leader exiting when it comes time to address that. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-07-20 19:30:23 +00:00
int send_sigqueue(struct sigqueue *q, struct pid *pid, enum pid_type type)
signals: consolidate send_sigqueue and send_group_sigqueue Both functions do the same thing after proper locking, but with different sigpending structs, so move the common code into a helper. After this we have 4 places that look very similar: send_sigqueue: calls do_send_sigqueue and signal_wakeup send_group_sigqueue: calls do_send_sigqueue and __group_complete_signal __group_send_sig_info: calls send_signal and __group_complete_signal specific_send_sig_info: calls send_signal and signal_wakeup Besides, send_signal performs actions similar to do_send_sigqueue's and __group_complete_signal - to signal_wakeup. It looks like they can be consolidated gracefully. Oleg said: Personally, I think this change is very good. But send_sigqueue() and send_group_sigqueue() have a very subtle difference which I was never able to understand. Let's suppose that sigqueue is already queued, and the signal is ignored (the latter means we should re-schedule cpu timer or handle overrruns). In that case send_sigqueue() returns 0, but send_group_sigqueue() returns 1. I think this is not the problem (in fact, I think this patch makes the behaviour more correct), but I hope Thomas can take a look and confirm. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:41 +00:00
{
signals: unify send_sigqueue/send_group_sigqueue completely Suggested by Pavel Emelyanov. send_sigqueue/send_group_sigqueue are only differ in how they lock ->siglock. Unify them. send_group_sigqueue() uses spin_lock() because it knows the task can't exit, but in that case lock_task_sighand() can't fail and doesn't hurt. Note that the "sig" argument is ignored, it is always equal to ->si_signo. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:56 +00:00
int sig = q->info.si_signo;
signals: change send_signal/do_send_sigqueue to take "boolean group" parameter send_signal() is used either with ->pending or with ->signal->shared_pending. Change it to take "int group" instead, this argument will be re-used later. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:54 +00:00
struct sigpending *pending;
signal: Pass pid and pid type into send_sigqueue Make the code more maintainable by performing more of the signal related work in send_sigqueue. A quick inspection of do_timer_create will show that this code path does not lookup a thread group by a thread's pid. Making it safe to find the task pointed to by it_pid with "pid_task(it_pid, type)"; This supports the changes needed in fork to tell if a signal was sent to a single process or a group of processes. Having the pid to task transition in signal.c will also make it easier to sort out races with de_thread and and the thread group leader exiting when it comes time to address that. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-07-20 19:30:23 +00:00
struct task_struct *t;
signals: unify send_sigqueue/send_group_sigqueue completely Suggested by Pavel Emelyanov. send_sigqueue/send_group_sigqueue are only differ in how they lock ->siglock. Unify them. send_group_sigqueue() uses spin_lock() because it knows the task can't exit, but in that case lock_task_sighand() can't fail and doesn't hurt. Note that the "sig" argument is ignored, it is always equal to ->si_signo. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:56 +00:00
unsigned long flags;
tracing: send_sigqueue() needs trace_signal_generate() too Add trace_signal_generate() into send_sigqueue(). send_sigqueue() is very similar to __send_signal(), just it uses the preallocated info. It should do the same wrt tracing. Reported-by: Seiji Aguchi <saguchi@redhat.com> Reviewed-by: Seiji Aguchi <seiji.aguchi@hds.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-11-22 20:37:41 +00:00
int ret, result;
signals: change send_signal/do_send_sigqueue to take "boolean group" parameter send_signal() is used either with ->pending or with ->signal->shared_pending. Change it to take "int group" instead, this argument will be re-used later. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:54 +00:00
signals: fold complete_signal() into send_signal/do_send_sigqueue Factor out complete_signal() callsites. This change completely unifies the helpers sending the specific/group signals. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:55 +00:00
BUG_ON(!(q->flags & SIGQUEUE_PREALLOC));
signals: unify send_sigqueue/send_group_sigqueue completely Suggested by Pavel Emelyanov. send_sigqueue/send_group_sigqueue are only differ in how they lock ->siglock. Unify them. send_group_sigqueue() uses spin_lock() because it knows the task can't exit, but in that case lock_task_sighand() can't fail and doesn't hurt. Note that the "sig" argument is ignored, it is always equal to ->si_signo. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:56 +00:00
ret = -1;
signal: Pass pid and pid type into send_sigqueue Make the code more maintainable by performing more of the signal related work in send_sigqueue. A quick inspection of do_timer_create will show that this code path does not lookup a thread group by a thread's pid. Making it safe to find the task pointed to by it_pid with "pid_task(it_pid, type)"; This supports the changes needed in fork to tell if a signal was sent to a single process or a group of processes. Having the pid to task transition in signal.c will also make it easier to sort out races with de_thread and and the thread group leader exiting when it comes time to address that. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-07-20 19:30:23 +00:00
rcu_read_lock();
t = pid_task(pid, type);
if (!t || !likely(lock_task_sighand(t, &flags)))
signals: unify send_sigqueue/send_group_sigqueue completely Suggested by Pavel Emelyanov. send_sigqueue/send_group_sigqueue are only differ in how they lock ->siglock. Unify them. send_group_sigqueue() uses spin_lock() because it knows the task can't exit, but in that case lock_task_sighand() can't fail and doesn't hurt. Note that the "sig" argument is ignored, it is always equal to ->si_signo. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:56 +00:00
goto ret;
signals: fold sig_ignored() into handle_stop_signal() Rename handle_stop_signal() to prepare_signal(), make it return a boolean, and move the callsites of sig_ignored() into it. No functional changes for now. But it would be nice to factor out the "should we drop this signal" checks as much as possible, before we try to fix the bugs with the sub-namespace init's signals (actually the global /sbin/init has some problems with signals too). Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:59 +00:00
ret = 1; /* the signal is ignored */
tracing: send_sigqueue() needs trace_signal_generate() too Add trace_signal_generate() into send_sigqueue(). send_sigqueue() is very similar to __send_signal(), just it uses the preallocated info. It should do the same wrt tracing. Reported-by: Seiji Aguchi <saguchi@redhat.com> Reviewed-by: Seiji Aguchi <seiji.aguchi@hds.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-11-22 20:37:41 +00:00
result = TRACE_SIGNAL_IGNORED;
signal: cosmetic, s/from_ancestor_ns/force/ in prepare_signal() paths Cosmetic, rename the from_ancestor_ns argument in prepare_signal() paths. After the previous change it doesn't match the reality. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Anton Vorontsov <anton.vorontsov@linaro.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23 22:02:45 +00:00
if (!prepare_signal(sig, t, false))
signals: unify send_sigqueue/send_group_sigqueue completely Suggested by Pavel Emelyanov. send_sigqueue/send_group_sigqueue are only differ in how they lock ->siglock. Unify them. send_group_sigqueue() uses spin_lock() because it knows the task can't exit, but in that case lock_task_sighand() can't fail and doesn't hurt. Note that the "sig" argument is ignored, it is always equal to ->si_signo. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:56 +00:00
goto out;
ret = 0;
signals: consolidate send_sigqueue and send_group_sigqueue Both functions do the same thing after proper locking, but with different sigpending structs, so move the common code into a helper. After this we have 4 places that look very similar: send_sigqueue: calls do_send_sigqueue and signal_wakeup send_group_sigqueue: calls do_send_sigqueue and __group_complete_signal __group_send_sig_info: calls send_signal and __group_complete_signal specific_send_sig_info: calls send_signal and signal_wakeup Besides, send_signal performs actions similar to do_send_sigqueue's and __group_complete_signal - to signal_wakeup. It looks like they can be consolidated gracefully. Oleg said: Personally, I think this change is very good. But send_sigqueue() and send_group_sigqueue() have a very subtle difference which I was never able to understand. Let's suppose that sigqueue is already queued, and the signal is ignored (the latter means we should re-schedule cpu timer or handle overrruns). In that case send_sigqueue() returns 0, but send_group_sigqueue() returns 1. I think this is not the problem (in fact, I think this patch makes the behaviour more correct), but I hope Thomas can take a look and confirm. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:41 +00:00
if (unlikely(!list_empty(&q->list))) {
/*
* If an SI_TIMER entry is already queue just increment
* the overrun count.
*/
BUG_ON(q->info.si_code != SI_TIMER);
q->info.si_overrun++;
tracing: send_sigqueue() needs trace_signal_generate() too Add trace_signal_generate() into send_sigqueue(). send_sigqueue() is very similar to __send_signal(), just it uses the preallocated info. It should do the same wrt tracing. Reported-by: Seiji Aguchi <saguchi@redhat.com> Reviewed-by: Seiji Aguchi <seiji.aguchi@hds.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-11-22 20:37:41 +00:00
result = TRACE_SIGNAL_ALREADY_PENDING;
signals: unify send_sigqueue/send_group_sigqueue completely Suggested by Pavel Emelyanov. send_sigqueue/send_group_sigqueue are only differ in how they lock ->siglock. Unify them. send_group_sigqueue() uses spin_lock() because it knows the task can't exit, but in that case lock_task_sighand() can't fail and doesn't hurt. Note that the "sig" argument is ignored, it is always equal to ->si_signo. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:56 +00:00
goto out;
signals: consolidate send_sigqueue and send_group_sigqueue Both functions do the same thing after proper locking, but with different sigpending structs, so move the common code into a helper. After this we have 4 places that look very similar: send_sigqueue: calls do_send_sigqueue and signal_wakeup send_group_sigqueue: calls do_send_sigqueue and __group_complete_signal __group_send_sig_info: calls send_signal and __group_complete_signal specific_send_sig_info: calls send_signal and signal_wakeup Besides, send_signal performs actions similar to do_send_sigqueue's and __group_complete_signal - to signal_wakeup. It looks like they can be consolidated gracefully. Oleg said: Personally, I think this change is very good. But send_sigqueue() and send_group_sigqueue() have a very subtle difference which I was never able to understand. Let's suppose that sigqueue is already queued, and the signal is ignored (the latter means we should re-schedule cpu timer or handle overrruns). In that case send_sigqueue() returns 0, but send_group_sigqueue() returns 1. I think this is not the problem (in fact, I think this patch makes the behaviour more correct), but I hope Thomas can take a look and confirm. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:41 +00:00
}
posix-timers: fix posix_timer_event() vs dequeue_signal() race The bug was reported and analysed by Mark McLoughlin <markmc@redhat.com>, the patch is based on his and Roland's suggestions. posix_timer_event() always rewrites the pre-allocated siginfo before sending the signal. Most of the written info is the same all the time, but memset(0) is very wrong. If ->sigq is queued we can race with collect_signal() which can fail to find this siginfo looking at .si_signo, or copy_siginfo() can copy the wrong .si_code/si_tid/etc. In short, sys_timer_settime() can in fact stop the active timer, or the user can receive the siginfo with the wrong .si_xxx values. Move "memset(->info, 0)" from posix_timer_event() to alloc_posix_timer(), change send_sigqueue() to set .si_overrun = 0 when ->sigq is not queued. It would be nice to move the whole sigq->info initialization from send to create path, but this is not easy to do without uglifying timer_create() further. As Roland rightly pointed out, we need more cleanups/fixes here, see the "FIXME" comment in the patch. Hopefully this patch makes sense anyway, and it can mask the most bad implications. Reported-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Mark McLoughlin <markmc@redhat.com> Cc: Oliver Pinter <oliver.pntr@gmail.com> Cc: Roland McGrath <roland@redhat.com> Cc: stable@kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> kernel/posix-timers.c | 17 +++++++++++++---- kernel/signal.c | 1 + 2 files changed, 14 insertions(+), 4 deletions(-)
2008-07-23 16:52:05 +00:00
q->info.si_overrun = 0;
signals: consolidate send_sigqueue and send_group_sigqueue Both functions do the same thing after proper locking, but with different sigpending structs, so move the common code into a helper. After this we have 4 places that look very similar: send_sigqueue: calls do_send_sigqueue and signal_wakeup send_group_sigqueue: calls do_send_sigqueue and __group_complete_signal __group_send_sig_info: calls send_signal and __group_complete_signal specific_send_sig_info: calls send_signal and signal_wakeup Besides, send_signal performs actions similar to do_send_sigqueue's and __group_complete_signal - to signal_wakeup. It looks like they can be consolidated gracefully. Oleg said: Personally, I think this change is very good. But send_sigqueue() and send_group_sigqueue() have a very subtle difference which I was never able to understand. Let's suppose that sigqueue is already queued, and the signal is ignored (the latter means we should re-schedule cpu timer or handle overrruns). In that case send_sigqueue() returns 0, but send_group_sigqueue() returns 1. I think this is not the problem (in fact, I think this patch makes the behaviour more correct), but I hope Thomas can take a look and confirm. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:41 +00:00
signalfd_notify(t, sig);
signal: Pass pid and pid type into send_sigqueue Make the code more maintainable by performing more of the signal related work in send_sigqueue. A quick inspection of do_timer_create will show that this code path does not lookup a thread group by a thread's pid. Making it safe to find the task pointed to by it_pid with "pid_task(it_pid, type)"; This supports the changes needed in fork to tell if a signal was sent to a single process or a group of processes. Having the pid to task transition in signal.c will also make it easier to sort out races with de_thread and and the thread group leader exiting when it comes time to address that. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-07-20 19:30:23 +00:00
pending = (type != PIDTYPE_PID) ? &t->signal->shared_pending : &t->pending;
signals: consolidate send_sigqueue and send_group_sigqueue Both functions do the same thing after proper locking, but with different sigpending structs, so move the common code into a helper. After this we have 4 places that look very similar: send_sigqueue: calls do_send_sigqueue and signal_wakeup send_group_sigqueue: calls do_send_sigqueue and __group_complete_signal __group_send_sig_info: calls send_signal and __group_complete_signal specific_send_sig_info: calls send_signal and signal_wakeup Besides, send_signal performs actions similar to do_send_sigqueue's and __group_complete_signal - to signal_wakeup. It looks like they can be consolidated gracefully. Oleg said: Personally, I think this change is very good. But send_sigqueue() and send_group_sigqueue() have a very subtle difference which I was never able to understand. Let's suppose that sigqueue is already queued, and the signal is ignored (the latter means we should re-schedule cpu timer or handle overrruns). In that case send_sigqueue() returns 0, but send_group_sigqueue() returns 1. I think this is not the problem (in fact, I think this patch makes the behaviour more correct), but I hope Thomas can take a look and confirm. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:41 +00:00
list_add_tail(&q->list, &pending->list);
sigaddset(&pending->signal, sig);
signal: Push pid type down into complete_signal. This is the bottom and by pushing this down it simplifies the callers and otherwise leaves things as is. This is in preparation for allowing fork to implement better handling of signals set to groups of processes. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-07-14 02:39:13 +00:00
complete_signal(sig, t, type);
tracing: send_sigqueue() needs trace_signal_generate() too Add trace_signal_generate() into send_sigqueue(). send_sigqueue() is very similar to __send_signal(), just it uses the preallocated info. It should do the same wrt tracing. Reported-by: Seiji Aguchi <saguchi@redhat.com> Reviewed-by: Seiji Aguchi <seiji.aguchi@hds.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-11-22 20:37:41 +00:00
result = TRACE_SIGNAL_DELIVERED;
signals: unify send_sigqueue/send_group_sigqueue completely Suggested by Pavel Emelyanov. send_sigqueue/send_group_sigqueue are only differ in how they lock ->siglock. Unify them. send_group_sigqueue() uses spin_lock() because it knows the task can't exit, but in that case lock_task_sighand() can't fail and doesn't hurt. Note that the "sig" argument is ignored, it is always equal to ->si_signo. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:56 +00:00
out:
signal: Pass pid and pid type into send_sigqueue Make the code more maintainable by performing more of the signal related work in send_sigqueue. A quick inspection of do_timer_create will show that this code path does not lookup a thread group by a thread's pid. Making it safe to find the task pointed to by it_pid with "pid_task(it_pid, type)"; This supports the changes needed in fork to tell if a signal was sent to a single process or a group of processes. Having the pid to task transition in signal.c will also make it easier to sort out races with de_thread and and the thread group leader exiting when it comes time to address that. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-07-20 19:30:23 +00:00
trace_signal_generate(sig, &q->info, t, type != PIDTYPE_PID, result);
signals: unify send_sigqueue/send_group_sigqueue completely Suggested by Pavel Emelyanov. send_sigqueue/send_group_sigqueue are only differ in how they lock ->siglock. Unify them. send_group_sigqueue() uses spin_lock() because it knows the task can't exit, but in that case lock_task_sighand() can't fail and doesn't hurt. Note that the "sig" argument is ignored, it is always equal to ->si_signo. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:56 +00:00
unlock_task_sighand(t, &flags);
ret:
signal: Pass pid and pid type into send_sigqueue Make the code more maintainable by performing more of the signal related work in send_sigqueue. A quick inspection of do_timer_create will show that this code path does not lookup a thread group by a thread's pid. Making it safe to find the task pointed to by it_pid with "pid_task(it_pid, type)"; This supports the changes needed in fork to tell if a signal was sent to a single process or a group of processes. Having the pid to task transition in signal.c will also make it easier to sort out races with de_thread and and the thread group leader exiting when it comes time to address that. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-07-20 19:30:23 +00:00
rcu_read_unlock();
signals: unify send_sigqueue/send_group_sigqueue completely Suggested by Pavel Emelyanov. send_sigqueue/send_group_sigqueue are only differ in how they lock ->siglock. Unify them. send_group_sigqueue() uses spin_lock() because it knows the task can't exit, but in that case lock_task_sighand() can't fail and doesn't hurt. Note that the "sig" argument is ignored, it is always equal to ->si_signo. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:56 +00:00
return ret;
signals: consolidate send_sigqueue and send_group_sigqueue Both functions do the same thing after proper locking, but with different sigpending structs, so move the common code into a helper. After this we have 4 places that look very similar: send_sigqueue: calls do_send_sigqueue and signal_wakeup send_group_sigqueue: calls do_send_sigqueue and __group_complete_signal __group_send_sig_info: calls send_signal and __group_complete_signal specific_send_sig_info: calls send_signal and signal_wakeup Besides, send_signal performs actions similar to do_send_sigqueue's and __group_complete_signal - to signal_wakeup. It looks like they can be consolidated gracefully. Oleg said: Personally, I think this change is very good. But send_sigqueue() and send_group_sigqueue() have a very subtle difference which I was never able to understand. Let's suppose that sigqueue is already queued, and the signal is ignored (the latter means we should re-schedule cpu timer or handle overrruns). In that case send_sigqueue() returns 0, but send_group_sigqueue() returns 1. I think this is not the problem (in fact, I think this patch makes the behaviour more correct), but I hope Thomas can take a look and confirm. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:41 +00:00
}
pidfd: add polling support This patch adds polling support to pidfd. Android low memory killer (LMK) needs to know when a process dies once it is sent the kill signal. It does so by checking for the existence of /proc/pid which is both racy and slow. For example, if a PID is reused between when LMK sends a kill signal and checks for existence of the PID, since the wrong PID is now possibly checked for existence. Using the polling support, LMK will be able to get notified when a process exists in race-free and fast way, and allows the LMK to do other things (such as by polling on other fds) while awaiting the process being killed to die. For notification to polling processes, we follow the same existing mechanism in the kernel used when the parent of the task group is to be notified of a child's death (do_notify_parent). This is precisely when the tasks waiting on a poll of pidfd are also awakened in this patch. We have decided to include the waitqueue in struct pid for the following reasons: 1. The wait queue has to survive for the lifetime of the poll. Including it in task_struct would not be option in this case because the task can be reaped and destroyed before the poll returns. 2. By including the struct pid for the waitqueue means that during de_thread(), the new thread group leader automatically gets the new waitqueue/pid even though its task_struct is different. Appropriate test cases are added in the second patch to provide coverage of all the cases the patch is handling. Cc: Andy Lutomirski <luto@amacapital.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Daniel Colascione <dancol@google.com> Cc: Jann Horn <jannh@google.com> Cc: Tim Murray <timmurray@google.com> Cc: Jonathan Kowalski <bl0pbl33p@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Kees Cook <keescook@chromium.org> Cc: David Howells <dhowells@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: kernel-team@android.com Reviewed-by: Oleg Nesterov <oleg@redhat.com> Co-developed-by: Daniel Colascione <dancol@google.com> Signed-off-by: Daniel Colascione <dancol@google.com> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Christian Brauner <christian@brauner.io>
2019-04-30 16:21:53 +00:00
static void do_notify_pidfd(struct task_struct *task)
{
struct pid *pid;
pidfd: Add warning if exit_state is 0 during notification Previously a condition got missed where the pidfd waiters are awakened before the exit_state gets set. This can result in a missed notification [1] and the polling thread waiting forever. It is fixed now, however it would be nice to avoid this kind of issue going unnoticed in the future. So just add a warning to catch it in the future. /* References */ [1]: https://lore.kernel.org/lkml/20190717172100.261204-1-joel@joelfernandes.org/ Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Link: https://lore.kernel.org/r/20190724164816.201099-1-joel@joelfernandes.org Signed-off-by: Christian Brauner <christian@brauner.io>
2019-07-24 16:48:16 +00:00
WARN_ON(task->exit_state == 0);
pidfd: add polling support This patch adds polling support to pidfd. Android low memory killer (LMK) needs to know when a process dies once it is sent the kill signal. It does so by checking for the existence of /proc/pid which is both racy and slow. For example, if a PID is reused between when LMK sends a kill signal and checks for existence of the PID, since the wrong PID is now possibly checked for existence. Using the polling support, LMK will be able to get notified when a process exists in race-free and fast way, and allows the LMK to do other things (such as by polling on other fds) while awaiting the process being killed to die. For notification to polling processes, we follow the same existing mechanism in the kernel used when the parent of the task group is to be notified of a child's death (do_notify_parent). This is precisely when the tasks waiting on a poll of pidfd are also awakened in this patch. We have decided to include the waitqueue in struct pid for the following reasons: 1. The wait queue has to survive for the lifetime of the poll. Including it in task_struct would not be option in this case because the task can be reaped and destroyed before the poll returns. 2. By including the struct pid for the waitqueue means that during de_thread(), the new thread group leader automatically gets the new waitqueue/pid even though its task_struct is different. Appropriate test cases are added in the second patch to provide coverage of all the cases the patch is handling. Cc: Andy Lutomirski <luto@amacapital.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Daniel Colascione <dancol@google.com> Cc: Jann Horn <jannh@google.com> Cc: Tim Murray <timmurray@google.com> Cc: Jonathan Kowalski <bl0pbl33p@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Kees Cook <keescook@chromium.org> Cc: David Howells <dhowells@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: kernel-team@android.com Reviewed-by: Oleg Nesterov <oleg@redhat.com> Co-developed-by: Daniel Colascione <dancol@google.com> Signed-off-by: Daniel Colascione <dancol@google.com> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Christian Brauner <christian@brauner.io>
2019-04-30 16:21:53 +00:00
pid = task_pid(task);
wake_up_all(&pid->wait_pidfd);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* Let a parent know about the death of a child.
* For a stopped/continued status change, use do_notify_parent_cldstop instead.
tracehook: death This moves the ptrace logic in task death (exit_notify) into tracehook.h inlines. Some code is rearranged slightly to make things nicer. There is no change, only cleanup. There is one hook called with the tasklist_lock write-locked, as ptrace needs. There is also a new hook called after exit_state changes and without locks. This is a better place for tracing work to be in the future, since it doesn't delay the whole system with locking. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Reviewed-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 02:45:54 +00:00
*
make do_notify_parent() return bool - change do_notify_parent() to return a boolean, true if the task should be reaped because its parent ignores SIGCHLD. - update the only caller which checks the returned value, exit_notify(). This temporary uglifies exit_notify() even more, will be cleanuped by the next change. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-06-22 21:08:18 +00:00
* Returns true if our parent ignored us and so we've switched to
* self-reaping.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
make do_notify_parent() return bool - change do_notify_parent() to return a boolean, true if the task should be reaped because its parent ignores SIGCHLD. - update the only caller which checks the returned value, exit_notify(). This temporary uglifies exit_notify() even more, will be cleanuped by the next change. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-06-22 21:08:18 +00:00
bool do_notify_parent(struct task_struct *tsk, int sig)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
struct kernel_siginfo info;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
unsigned long flags;
struct sighand_struct *psig;
make do_notify_parent() return bool - change do_notify_parent() to return a boolean, true if the task should be reaped because its parent ignores SIGCHLD. - update the only caller which checks the returned value, exit_notify(). This temporary uglifies exit_notify() even more, will be cleanuped by the next change. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-06-22 21:08:18 +00:00
bool autoreap = false;
signal: Convert obsolete cputime type to nsecs Use the new nsec based cputime accessors as part of the whole cputime conversion from cputime_t to nsecs. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1485832191-26889-16-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-31 03:09:31 +00:00
u64 utime, stime;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
BUG_ON(sig == -1);
/* do_notify_parent_cldstop should have been called instead. */
signal: Use task_is_* Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2007-12-06 16:07:35 +00:00
BUG_ON(task_is_stopped_or_traced(tsk));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ptrace: kill task_ptrace() task_ptrace(task) simply dereferences task->ptrace and isn't even used consistently only adding confusion. Kill it and directly access ->ptrace instead. This doesn't introduce any behavior change. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-17 14:50:34 +00:00
BUG_ON(!tsk->ptrace &&
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
(tsk->group_leader != tsk || !thread_group_empty(tsk)));
pidfd: add polling support This patch adds polling support to pidfd. Android low memory killer (LMK) needs to know when a process dies once it is sent the kill signal. It does so by checking for the existence of /proc/pid which is both racy and slow. For example, if a PID is reused between when LMK sends a kill signal and checks for existence of the PID, since the wrong PID is now possibly checked for existence. Using the polling support, LMK will be able to get notified when a process exists in race-free and fast way, and allows the LMK to do other things (such as by polling on other fds) while awaiting the process being killed to die. For notification to polling processes, we follow the same existing mechanism in the kernel used when the parent of the task group is to be notified of a child's death (do_notify_parent). This is precisely when the tasks waiting on a poll of pidfd are also awakened in this patch. We have decided to include the waitqueue in struct pid for the following reasons: 1. The wait queue has to survive for the lifetime of the poll. Including it in task_struct would not be option in this case because the task can be reaped and destroyed before the poll returns. 2. By including the struct pid for the waitqueue means that during de_thread(), the new thread group leader automatically gets the new waitqueue/pid even though its task_struct is different. Appropriate test cases are added in the second patch to provide coverage of all the cases the patch is handling. Cc: Andy Lutomirski <luto@amacapital.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Daniel Colascione <dancol@google.com> Cc: Jann Horn <jannh@google.com> Cc: Tim Murray <timmurray@google.com> Cc: Jonathan Kowalski <bl0pbl33p@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Kees Cook <keescook@chromium.org> Cc: David Howells <dhowells@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: kernel-team@android.com Reviewed-by: Oleg Nesterov <oleg@redhat.com> Co-developed-by: Daniel Colascione <dancol@google.com> Signed-off-by: Daniel Colascione <dancol@google.com> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Christian Brauner <christian@brauner.io>
2019-04-30 16:21:53 +00:00
/* Wake up all pidfd waiters */
do_notify_pidfd(tsk);
exit_signal: fix the "parent has changed security domain" logic exit_notify() changes ->exit_signal if the parent already did exec. This doesn't really work, we are not going to send the signal now if there is another live thread or the exiting task is traced. The parent can exec before the last dies or the tracer detaches. Move this check into do_notify_parent() which actually sends the signal. The user-visible change is that we do not change ->exit_signal, and thus the exiting task is still "clone children" for do_wait()->eligible_child(__WCLONE). Hopefully this is fine, the current logic is racy anyway. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-19 16:03:41 +00:00
if (sig != SIGCHLD) {
/*
* This is only possible if parent == real_parent.
* Check if it has changed security domain.
*/
signal: Extend exec_id to 64bits Replace the 32bit exec_id with a 64bit exec_id to make it impossible to wrap the exec_id counter. With care an attacker can cause exec_id wrap and send arbitrary signals to a newly exec'd parent. This bypasses the signal sending checks if the parent changes their credentials during exec. The severity of this problem can been seen that in my limited testing of a 32bit exec_id it can take as little as 19s to exec 65536 times. Which means that it can take as little as 14 days to wrap a 32bit exec_id. Adam Zabrocki has succeeded wrapping the self_exe_id in 7 days. Even my slower timing is in the uptime of a typical server. Which means self_exec_id is simply a speed bump today, and if exec gets noticably faster self_exec_id won't even be a speed bump. Extending self_exec_id to 64bits introduces a problem on 32bit architectures where reading self_exec_id is no longer atomic and can take two read instructions. Which means that is is possible to hit a window where the read value of exec_id does not match the written value. So with very lucky timing after this change this still remains expoiltable. I have updated the update of exec_id on exec to use WRITE_ONCE and the read of exec_id in do_notify_parent to use READ_ONCE to make it clear that there is no locking between these two locations. Link: https://lore.kernel.org/kernel-hardening/20200324215049.GA3710@pi3.com.pl Fixes: 2.3.23pre2 Cc: stable@vger.kernel.org Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-03-31 00:01:04 +00:00
if (tsk->parent_exec_id != READ_ONCE(tsk->parent->self_exec_id))
exit_signal: fix the "parent has changed security domain" logic exit_notify() changes ->exit_signal if the parent already did exec. This doesn't really work, we are not going to send the signal now if there is another live thread or the exiting task is traced. The parent can exec before the last dies or the tracer detaches. Move this check into do_notify_parent() which actually sends the signal. The user-visible change is that we do not change ->exit_signal, and thus the exiting task is still "clone children" for do_wait()->eligible_child(__WCLONE). Hopefully this is fine, the current logic is racy anyway. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-19 16:03:41 +00:00
sig = SIGCHLD;
}
signal: Ensure generic siginfos the kernel sends have all bits initialized Call clear_siginfo to ensure stack allocated siginfos are fully initialized before being passed to the signal sending functions. This ensures that if there is the kind of confusion documented by TRAP_FIXME, FPE_FIXME, or BUS_FIXME the kernel won't send unitialized data to userspace when the kernel generates a signal with SI_USER but the copy to userspace assumes it is a different kind of signal, and different fields are initialized. This also prepares the way for turning copy_siginfo_to_user into a copy_to_user, by removing the need in many cases to perform a field by field copy simply to skip the uninitialized fields. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-05 23:27:42 +00:00
clear_siginfo(&info);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
info.si_signo = sig;
info.si_errno = 0;
pid namespaces: changes to show virtual ids to user This is the largest patch in the set. Make all (I hope) the places where the pid is shown to or get from user operate on the virtual pids. The idea is: - all in-kernel data structures must store either struct pid itself or the pid's global nr, obtained with pid_nr() call; - when seeking the task from kernel code with the stored id one should use find_task_by_pid() call that works with global pids; - when showing pid's numerical value to the user the virtual one should be used, but however when one shows task's pid outside this task's namespace the global one is to be used; - when getting the pid from userspace one need to consider this as the virtual one and use appropriate task/pid-searching functions. [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: nuther build fix] [akpm@linux-foundation.org: yet nuther build fix] [akpm@linux-foundation.org: remove unneeded casts] Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 06:40:14 +00:00
/*
pidns: use task_active_pid_ns in do_notify_parent Using task_active_pid_ns is more robust because it works even after we have called exit_namespaces. This change allows us to have parent processes that are zombies. Normally a zombie parent processes is crazy and the last thing you would want to have but in the case of not letting the init process of a pid namespace be reaped until all of it's children are dead and reaped a zombie parent process is exactly what we want. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Louis Rilling <louis.rilling@kerlabs.com> Cc: Mike Galbraith <efault@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 23:26:39 +00:00
* We are under tasklist_lock here so our parent is tied to
* us and cannot change.
pid namespaces: changes to show virtual ids to user This is the largest patch in the set. Make all (I hope) the places where the pid is shown to or get from user operate on the virtual pids. The idea is: - all in-kernel data structures must store either struct pid itself or the pid's global nr, obtained with pid_nr() call; - when seeking the task from kernel code with the stored id one should use find_task_by_pid() call that works with global pids; - when showing pid's numerical value to the user the virtual one should be used, but however when one shows task's pid outside this task's namespace the global one is to be used; - when getting the pid from userspace one need to consider this as the virtual one and use appropriate task/pid-searching functions. [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: nuther build fix] [akpm@linux-foundation.org: yet nuther build fix] [akpm@linux-foundation.org: remove unneeded casts] Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 06:40:14 +00:00
*
pidns: use task_active_pid_ns in do_notify_parent Using task_active_pid_ns is more robust because it works even after we have called exit_namespaces. This change allows us to have parent processes that are zombies. Normally a zombie parent processes is crazy and the last thing you would want to have but in the case of not letting the init process of a pid namespace be reaped until all of it's children are dead and reaped a zombie parent process is exactly what we want. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Louis Rilling <louis.rilling@kerlabs.com> Cc: Mike Galbraith <efault@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 23:26:39 +00:00
* task_active_pid_ns will always return the same pid namespace
* until a task passes through release_task.
pid namespaces: changes to show virtual ids to user This is the largest patch in the set. Make all (I hope) the places where the pid is shown to or get from user operate on the virtual pids. The idea is: - all in-kernel data structures must store either struct pid itself or the pid's global nr, obtained with pid_nr() call; - when seeking the task from kernel code with the stored id one should use find_task_by_pid() call that works with global pids; - when showing pid's numerical value to the user the virtual one should be used, but however when one shows task's pid outside this task's namespace the global one is to be used; - when getting the pid from userspace one need to consider this as the virtual one and use appropriate task/pid-searching functions. [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: nuther build fix] [akpm@linux-foundation.org: yet nuther build fix] [akpm@linux-foundation.org: remove unneeded casts] Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 06:40:14 +00:00
*
* write_lock() currently calls preempt_disable() which is the
* same as rcu_read_lock(), but according to Oleg, this is not
* correct to rely on this
*/
rcu_read_lock();
pidns: use task_active_pid_ns in do_notify_parent Using task_active_pid_ns is more robust because it works even after we have called exit_namespaces. This change allows us to have parent processes that are zombies. Normally a zombie parent processes is crazy and the last thing you would want to have but in the case of not letting the init process of a pid namespace be reaped until all of it's children are dead and reaped a zombie parent process is exactly what we want. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Louis Rilling <louis.rilling@kerlabs.com> Cc: Mike Galbraith <efault@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 23:26:39 +00:00
info.si_pid = task_pid_nr_ns(tsk, task_active_pid_ns(tsk->parent));
userns: signal remove unnecessary map_cred_ns map_cred_ns is a light wrapper around from_kuid with the order of the arguments reversed. Replace map_cred_ns with from_kuid and remove map_cred_ns. Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-03-13 23:04:35 +00:00
info.si_uid = from_kuid_munged(task_cred_xxx(tsk->parent, user_ns),
task_uid(tsk));
pid namespaces: changes to show virtual ids to user This is the largest patch in the set. Make all (I hope) the places where the pid is shown to or get from user operate on the virtual pids. The idea is: - all in-kernel data structures must store either struct pid itself or the pid's global nr, obtained with pid_nr() call; - when seeking the task from kernel code with the stored id one should use find_task_by_pid() call that works with global pids; - when showing pid's numerical value to the user the virtual one should be used, but however when one shows task's pid outside this task's namespace the global one is to be used; - when getting the pid from userspace one need to consider this as the virtual one and use appropriate task/pid-searching functions. [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: nuther build fix] [akpm@linux-foundation.org: yet nuther build fix] [akpm@linux-foundation.org: remove unneeded casts] Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 06:40:14 +00:00
rcu_read_unlock();
signal: Convert obsolete cputime type to nsecs Use the new nsec based cputime accessors as part of the whole cputime conversion from cputime_t to nsecs. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1485832191-26889-16-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-31 03:09:31 +00:00
task_cputime(tsk, &utime, &stime);
info.si_utime = nsec_to_clock_t(utime + tsk->signal->utime);
info.si_stime = nsec_to_clock_t(stime + tsk->signal->stime);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
info.si_status = tsk->exit_code & 0x7f;
if (tsk->exit_code & 0x80)
info.si_code = CLD_DUMPED;
else if (tsk->exit_code & 0x7f)
info.si_code = CLD_KILLED;
else {
info.si_code = CLD_EXITED;
info.si_status = tsk->exit_code >> 8;
}
psig = tsk->parent->sighand;
spin_lock_irqsave(&psig->siglock, flags);
ptrace: kill task_ptrace() task_ptrace(task) simply dereferences task->ptrace and isn't even used consistently only adding confusion. Kill it and directly access ->ptrace instead. This doesn't introduce any behavior change. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-17 14:50:34 +00:00
if (!tsk->ptrace && sig == SIGCHLD &&
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
(psig->action[SIGCHLD-1].sa.sa_handler == SIG_IGN ||
(psig->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDWAIT))) {
/*
* We are exiting and our parent doesn't care. POSIX.1
* defines special semantics for setting SIGCHLD to SIG_IGN
* or setting the SA_NOCLDWAIT flag: we should be reaped
* automatically and not left for our parent's wait4 call.
* Rather than having the parent do it as a magic kind of
* signal handler, we just set this to tell do_exit that we
* can be cleaned up without becoming a zombie. Note that
* we still call __wake_up_parent in this case, because a
* blocked sys_wait4 might now return -ECHILD.
*
* Whether we send SIGCHLD or not for SA_NOCLDWAIT
* is implementation-defined: we do (if you don't want
* it, just use SIG_IGN instead).
*/
make do_notify_parent() return bool - change do_notify_parent() to return a boolean, true if the task should be reaped because its parent ignores SIGCHLD. - update the only caller which checks the returned value, exit_notify(). This temporary uglifies exit_notify() even more, will be cleanuped by the next change. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-06-22 21:08:18 +00:00
autoreap = true;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (psig->action[SIGCHLD-1].sa.sa_handler == SIG_IGN)
make do_notify_parent() return bool - change do_notify_parent() to return a boolean, true if the task should be reaped because its parent ignores SIGCHLD. - update the only caller which checks the returned value, exit_notify(). This temporary uglifies exit_notify() even more, will be cleanuped by the next change. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-06-22 21:08:18 +00:00
sig = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
make do_notify_parent() return bool - change do_notify_parent() to return a boolean, true if the task should be reaped because its parent ignores SIGCHLD. - update the only caller which checks the returned value, exit_notify(). This temporary uglifies exit_notify() even more, will be cleanuped by the next change. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-06-22 21:08:18 +00:00
if (valid_signal(sig) && sig)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
__group_send_sig_info(sig, &info, tsk->parent);
__wake_up_parent(tsk, tsk->parent);
spin_unlock_irqrestore(&psig->siglock, flags);
tracehook: death This moves the ptrace logic in task death (exit_notify) into tracehook.h inlines. Some code is rearranged slightly to make things nicer. There is no change, only cleanup. There is one hook called with the tasklist_lock write-locked, as ptrace needs. There is also a new hook called after exit_state changes and without locks. This is a better place for tracing work to be in the future, since it doesn't delay the whole system with locking. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Reviewed-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 02:45:54 +00:00
make do_notify_parent() return bool - change do_notify_parent() to return a boolean, true if the task should be reaped because its parent ignores SIGCHLD. - update the only caller which checks the returned value, exit_notify(). This temporary uglifies exit_notify() even more, will be cleanuped by the next change. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-06-22 21:08:18 +00:00
return autoreap;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
job control: Add @for_ptrace to do_notify_parent_cldstop() Currently, do_notify_parent_cldstop() determines whether the notification is for the real parent or ptracer. Move the decision to the caller by adding @for_ptrace parameter to do_notify_parent_cldstop(). All the callers are updated to pass task_ptrace(target_task), so this patch doesn't cause any behavior difference. While at it, add function comment to do_notify_parent_cldstop(). Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com>
2011-03-23 09:37:01 +00:00
/**
* do_notify_parent_cldstop - notify parent of stopped/continued state change
* @tsk: task reporting the state change
* @for_ptracer: the notification is for ptracer
* @why: CLD_{CONTINUED|STOPPED|TRAPPED} to report
*
* Notify @tsk's parent that the stopped/continued state has changed. If
* @for_ptracer is %false, @tsk's group leader notifies to its real parent.
* If %true, @tsk reports to @tsk->parent which should be the ptracer.
*
* CONTEXT:
* Must be called with tasklist_lock at least read locked.
*/
static void do_notify_parent_cldstop(struct task_struct *tsk,
bool for_ptracer, int why)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
struct kernel_siginfo info;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
unsigned long flags;
[PATCH] do_notify_parent_cldstop() cleanup This patch simplifies the usage of do_notify_parent_cldstop(), it lessens the source and .text size slightly, and makes the code (in my opinion) a bit more readable. I am sending this patch now because I'm afraid Paul will touch do_notify_parent_cldstop() really soon, It's better to cleanup first. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-06 22:17:32 +00:00
struct task_struct *parent;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct sighand_struct *sighand;
signal: Convert obsolete cputime type to nsecs Use the new nsec based cputime accessors as part of the whole cputime conversion from cputime_t to nsecs. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1485832191-26889-16-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-31 03:09:31 +00:00
u64 utime, stime;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
job control: Add @for_ptrace to do_notify_parent_cldstop() Currently, do_notify_parent_cldstop() determines whether the notification is for the real parent or ptracer. Move the decision to the caller by adding @for_ptrace parameter to do_notify_parent_cldstop(). All the callers are updated to pass task_ptrace(target_task), so this patch doesn't cause any behavior difference. While at it, add function comment to do_notify_parent_cldstop(). Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com>
2011-03-23 09:37:01 +00:00
if (for_ptracer) {
[PATCH] do_notify_parent_cldstop() cleanup This patch simplifies the usage of do_notify_parent_cldstop(), it lessens the source and .text size slightly, and makes the code (in my opinion) a bit more readable. I am sending this patch now because I'm afraid Paul will touch do_notify_parent_cldstop() really soon, It's better to cleanup first. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-06 22:17:32 +00:00
parent = tsk->parent;
job control: Add @for_ptrace to do_notify_parent_cldstop() Currently, do_notify_parent_cldstop() determines whether the notification is for the real parent or ptracer. Move the decision to the caller by adding @for_ptrace parameter to do_notify_parent_cldstop(). All the callers are updated to pass task_ptrace(target_task), so this patch doesn't cause any behavior difference. While at it, add function comment to do_notify_parent_cldstop(). Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com>
2011-03-23 09:37:01 +00:00
} else {
[PATCH] do_notify_parent_cldstop() cleanup This patch simplifies the usage of do_notify_parent_cldstop(), it lessens the source and .text size slightly, and makes the code (in my opinion) a bit more readable. I am sending this patch now because I'm afraid Paul will touch do_notify_parent_cldstop() really soon, It's better to cleanup first. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-06 22:17:32 +00:00
tsk = tsk->group_leader;
parent = tsk->real_parent;
}
signal: Ensure generic siginfos the kernel sends have all bits initialized Call clear_siginfo to ensure stack allocated siginfos are fully initialized before being passed to the signal sending functions. This ensures that if there is the kind of confusion documented by TRAP_FIXME, FPE_FIXME, or BUS_FIXME the kernel won't send unitialized data to userspace when the kernel generates a signal with SI_USER but the copy to userspace assumes it is a different kind of signal, and different fields are initialized. This also prepares the way for turning copy_siginfo_to_user into a copy_to_user, by removing the need in many cases to perform a field by field copy simply to skip the uninitialized fields. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-05 23:27:42 +00:00
clear_siginfo(&info);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
info.si_signo = SIGCHLD;
info.si_errno = 0;
pid namespaces: changes to show virtual ids to user This is the largest patch in the set. Make all (I hope) the places where the pid is shown to or get from user operate on the virtual pids. The idea is: - all in-kernel data structures must store either struct pid itself or the pid's global nr, obtained with pid_nr() call; - when seeking the task from kernel code with the stored id one should use find_task_by_pid() call that works with global pids; - when showing pid's numerical value to the user the virtual one should be used, but however when one shows task's pid outside this task's namespace the global one is to be used; - when getting the pid from userspace one need to consider this as the virtual one and use appropriate task/pid-searching functions. [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: nuther build fix] [akpm@linux-foundation.org: yet nuther build fix] [akpm@linux-foundation.org: remove unneeded casts] Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 06:40:14 +00:00
/*
kernel/signal.c: fix typos and coding style General coding style and comment fixes; no code changes: - Use multi-line-comment coding style. - Put some function signatures completely on one line. - Hyphenate some words. - Spell Posix as POSIX. - Correct typos & spellos in some comments. - Drop trailing whitespace. - End sentences with periods. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-04 21:59:31 +00:00
* see comment in do_notify_parent() about the following 4 lines
pid namespaces: changes to show virtual ids to user This is the largest patch in the set. Make all (I hope) the places where the pid is shown to or get from user operate on the virtual pids. The idea is: - all in-kernel data structures must store either struct pid itself or the pid's global nr, obtained with pid_nr() call; - when seeking the task from kernel code with the stored id one should use find_task_by_pid() call that works with global pids; - when showing pid's numerical value to the user the virtual one should be used, but however when one shows task's pid outside this task's namespace the global one is to be used; - when getting the pid from userspace one need to consider this as the virtual one and use appropriate task/pid-searching functions. [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: nuther build fix] [akpm@linux-foundation.org: yet nuther build fix] [akpm@linux-foundation.org: remove unneeded casts] Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 06:40:14 +00:00
*/
rcu_read_lock();
pidns: Use task_active_pid_ns where appropriate The expressions tsk->nsproxy->pid_ns and task_active_pid_ns aka ns_of_pid(task_pid(tsk)) should have the same number of cache line misses with the practical difference that ns_of_pid(task_pid(tsk)) is released later in a processes life. Furthermore by using task_active_pid_ns it becomes trivial to write an unshare implementation for the the pid namespace. So I have used task_active_pid_ns everywhere I can. In fork since the pid has not yet been attached to the process I use ns_of_pid, to achieve the same effect. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2010-03-02 22:51:53 +00:00
info.si_pid = task_pid_nr_ns(tsk, task_active_pid_ns(parent));
userns: signal remove unnecessary map_cred_ns map_cred_ns is a light wrapper around from_kuid with the order of the arguments reversed. Replace map_cred_ns with from_kuid and remove map_cred_ns. Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-03-13 23:04:35 +00:00
info.si_uid = from_kuid_munged(task_cred_xxx(parent, user_ns), task_uid(tsk));
pid namespaces: changes to show virtual ids to user This is the largest patch in the set. Make all (I hope) the places where the pid is shown to or get from user operate on the virtual pids. The idea is: - all in-kernel data structures must store either struct pid itself or the pid's global nr, obtained with pid_nr() call; - when seeking the task from kernel code with the stored id one should use find_task_by_pid() call that works with global pids; - when showing pid's numerical value to the user the virtual one should be used, but however when one shows task's pid outside this task's namespace the global one is to be used; - when getting the pid from userspace one need to consider this as the virtual one and use appropriate task/pid-searching functions. [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: nuther build fix] [akpm@linux-foundation.org: yet nuther build fix] [akpm@linux-foundation.org: remove unneeded casts] Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 06:40:14 +00:00
rcu_read_unlock();
signal: Convert obsolete cputime type to nsecs Use the new nsec based cputime accessors as part of the whole cputime conversion from cputime_t to nsecs. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1485832191-26889-16-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-31 03:09:31 +00:00
task_cputime(tsk, &utime, &stime);
info.si_utime = nsec_to_clock_t(utime);
info.si_stime = nsec_to_clock_t(stime);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
info.si_code = why;
switch (why) {
case CLD_CONTINUED:
info.si_status = SIGCONT;
break;
case CLD_STOPPED:
info.si_status = tsk->signal->group_exit_code & 0x7f;
break;
case CLD_TRAPPED:
info.si_status = tsk->exit_code & 0x7f;
break;
default:
BUG();
}
sighand = parent->sighand;
spin_lock_irqsave(&sighand->siglock, flags);
if (sighand->action[SIGCHLD-1].sa.sa_handler != SIG_IGN &&
!(sighand->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDSTOP))
__group_send_sig_info(SIGCHLD, &info, parent);
/*
* Even if SIGCHLD is not generated, we must wake up wait4 calls.
*/
__wake_up_parent(tsk, parent);
spin_unlock_irqrestore(&sighand->siglock, flags);
}
signal: make may_ptrace_stop() return bool may_ptrace_stop() already behaves like a boolean function. Let's actually declare it as such too. Link: http://lkml.kernel.org/r/20180602103653.18181-4-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Morris <james.morris@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 04:59:59 +00:00
static inline bool may_ptrace_stop(void)
[PATCH] coredump: kill ptrace related stuff With this patch zap_process() sets SIGNAL_GROUP_EXIT while sending SIGKILL to the thread group. This means that a TASK_TRACED task 1. Will be awakened by signal_wake_up(1) 2. Can't sleep again via ptrace_notify() 3. Can't go to do_signal_stop() after return from ptrace_stop() in get_signal_to_deliver() So we can remove all ptrace related stuff from coredump path. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 07:26:07 +00:00
{
ptrace: kill task_ptrace() task_ptrace(task) simply dereferences task->ptrace and isn't even used consistently only adding confusion. Kill it and directly access ->ptrace instead. This doesn't introduce any behavior change. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-17 14:50:34 +00:00
if (!likely(current->ptrace))
signal: make may_ptrace_stop() return bool may_ptrace_stop() already behaves like a boolean function. Let's actually declare it as such too. Link: http://lkml.kernel.org/r/20180602103653.18181-4-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Morris <james.morris@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 04:59:59 +00:00
return false;
[PATCH] coredump: kill ptrace related stuff With this patch zap_process() sets SIGNAL_GROUP_EXIT while sending SIGKILL to the thread group. This means that a TASK_TRACED task 1. Will be awakened by signal_wake_up(1) 2. Can't sleep again via ptrace_notify() 3. Can't go to do_signal_stop() after return from ptrace_stop() in get_signal_to_deliver() So we can remove all ptrace related stuff from coredump path. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 07:26:07 +00:00
/*
* Are we in the middle of do_coredump?
* If so and our tracer is also part of the coredump stopping
* is a deadlock situation, and pointless because our tracer
* is dead so don't allow us to stop.
* If SIGKILL was already sent before the caller unlocked
coredump: move mm->core_waiters into struct core_state Move mm->core_waiters into "struct core_state" allocated on stack. This shrinks mm_struct a little bit and allows further changes. This patch mostly does s/core_waiters/core_state. The only essential change is that coredump_wait() must clear mm->core_state before return. The coredump_wait()'s path is uglified and .text grows by 30 bytes, this is fixed by the next patch. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 08:47:41 +00:00
* ->siglock we must see ->core_state != NULL. Otherwise it
[PATCH] coredump: kill ptrace related stuff With this patch zap_process() sets SIGNAL_GROUP_EXIT while sending SIGKILL to the thread group. This means that a TASK_TRACED task 1. Will be awakened by signal_wake_up(1) 2. Can't sleep again via ptrace_notify() 3. Can't go to do_signal_stop() after return from ptrace_stop() in get_signal_to_deliver() So we can remove all ptrace related stuff from coredump path. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 07:26:07 +00:00
* is safe to enter schedule().
ptrace: ensure arch_ptrace/ptrace_request can never race with SIGKILL putreg() assumes that the tracee is not running and pt_regs_access() can safely play with its stack. However a killed tracee can return from ptrace_stop() to the low-level asm code and do RESTORE_REST, this means that debugger can actually read/modify the kernel stack until the tracee does SAVE_REST again. set_task_blockstep() can race with SIGKILL too and in some sense this race is even worse, the very fact the tracee can be woken up breaks the logic. As Linus suggested we can clear TASK_WAKEKILL around the arch_ptrace() call, this ensures that nobody can ever wakeup the tracee while the debugger looks at it. Not only this fixes the mentioned problems, we can do some cleanups/simplifications in arch_ptrace() paths. Probably ptrace_unfreeze_traced() needs more callers, for example it makes sense to make the tracee killable for oom-killer before access_process_vm(). While at it, add the comment into may_ptrace_stop() to explain why ptrace_stop() still can't rely on SIGKILL and signal_pending_state(). Reported-by: Salman Qazi <sqazi@google.com> Reported-by: Suleiman Souhlal <suleiman@google.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-21 19:48:00 +00:00
*
* This is almost outdated, a task with the pending SIGKILL can't
* block in TASK_TRACED. But PTRACE_EVENT_EXIT can be reported
* after SIGKILL was already dequeued.
[PATCH] coredump: kill ptrace related stuff With this patch zap_process() sets SIGNAL_GROUP_EXIT while sending SIGKILL to the thread group. This means that a TASK_TRACED task 1. Will be awakened by signal_wake_up(1) 2. Can't sleep again via ptrace_notify() 3. Can't go to do_signal_stop() after return from ptrace_stop() in get_signal_to_deliver() So we can remove all ptrace related stuff from coredump path. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 07:26:07 +00:00
*/
coredump: move mm->core_waiters into struct core_state Move mm->core_waiters into "struct core_state" allocated on stack. This shrinks mm_struct a little bit and allows further changes. This patch mostly does s/core_waiters/core_state. The only essential change is that coredump_wait() must clear mm->core_state before return. The coredump_wait()'s path is uglified and .text grows by 30 bytes, this is fixed by the next patch. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 08:47:41 +00:00
if (unlikely(current->mm->core_state) &&
[PATCH] coredump: kill ptrace related stuff With this patch zap_process() sets SIGNAL_GROUP_EXIT while sending SIGKILL to the thread group. This means that a TASK_TRACED task 1. Will be awakened by signal_wake_up(1) 2. Can't sleep again via ptrace_notify() 3. Can't go to do_signal_stop() after return from ptrace_stop() in get_signal_to_deliver() So we can remove all ptrace related stuff from coredump path. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 07:26:07 +00:00
unlikely(current->mm == current->parent->mm))
signal: make may_ptrace_stop() return bool may_ptrace_stop() already behaves like a boolean function. Let's actually declare it as such too. Link: http://lkml.kernel.org/r/20180602103653.18181-4-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Morris <james.morris@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 04:59:59 +00:00
return false;
[PATCH] coredump: kill ptrace related stuff With this patch zap_process() sets SIGNAL_GROUP_EXIT while sending SIGKILL to the thread group. This means that a TASK_TRACED task 1. Will be awakened by signal_wake_up(1) 2. Can't sleep again via ptrace_notify() 3. Can't go to do_signal_stop() after return from ptrace_stop() in get_signal_to_deliver() So we can remove all ptrace related stuff from coredump path. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 07:26:07 +00:00
signal: make may_ptrace_stop() return bool may_ptrace_stop() already behaves like a boolean function. Let's actually declare it as such too. Link: http://lkml.kernel.org/r/20180602103653.18181-4-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Morris <james.morris@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 04:59:59 +00:00
return true;
[PATCH] coredump: kill ptrace related stuff With this patch zap_process() sets SIGNAL_GROUP_EXIT while sending SIGKILL to the thread group. This means that a TASK_TRACED task 1. Will be awakened by signal_wake_up(1) 2. Can't sleep again via ptrace_notify() 3. Can't go to do_signal_stop() after return from ptrace_stop() in get_signal_to_deliver() So we can remove all ptrace related stuff from coredump path. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 07:26:07 +00:00
}
Add arch_ptrace_stop This adds support to allow asm/ptrace.h to define two new macros, arch_ptrace_stop_needed and arch_ptrace_stop. These control special machine-specific actions to be done before a ptrace stop. The new code compiles away to nothing when the new macros are not defined. This is the case on all machines to begin with. On ia64, these macros will be defined to solve the long-standing issue of ptrace vs register backing store. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Petr Tesarik <ptesarik@suse.cz> Cc: Tony Luck <tony.luck@intel.com> Cc: Matthew Wilcox <willy@debian.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 09:37:37 +00:00
/*
kernel/signal.c: fix typos and coding style General coding style and comment fixes; no code changes: - Use multi-line-comment coding style. - Put some function signatures completely on one line. - Hyphenate some words. - Spell Posix as POSIX. - Correct typos & spellos in some comments. - Drop trailing whitespace. - End sentences with periods. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-04 21:59:31 +00:00
* Return non-zero if there is a SIGKILL that should be waking us up.
Add arch_ptrace_stop This adds support to allow asm/ptrace.h to define two new macros, arch_ptrace_stop_needed and arch_ptrace_stop. These control special machine-specific actions to be done before a ptrace stop. The new code compiles away to nothing when the new macros are not defined. This is the case on all machines to begin with. On ia64, these macros will be defined to solve the long-standing issue of ptrace vs register backing store. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Petr Tesarik <ptesarik@suse.cz> Cc: Tony Luck <tony.luck@intel.com> Cc: Matthew Wilcox <willy@debian.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 09:37:37 +00:00
* Called with the siglock held.
*/
signal: make sigkill_pending() return bool sigkill_pending() already behaves like a boolean function. Let's actually declare it as such too. Link: http://lkml.kernel.org/r/20180602103653.18181-17-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Morris <james.morris@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 05:00:50 +00:00
static bool sigkill_pending(struct task_struct *tsk)
Add arch_ptrace_stop This adds support to allow asm/ptrace.h to define two new macros, arch_ptrace_stop_needed and arch_ptrace_stop. These control special machine-specific actions to be done before a ptrace stop. The new code compiles away to nothing when the new macros are not defined. This is the case on all machines to begin with. On ia64, these macros will be defined to solve the long-standing issue of ptrace vs register backing store. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Petr Tesarik <ptesarik@suse.cz> Cc: Tony Luck <tony.luck@intel.com> Cc: Matthew Wilcox <willy@debian.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 09:37:37 +00:00
{
signal: make sigkill_pending() return bool sigkill_pending() already behaves like a boolean function. Let's actually declare it as such too. Link: http://lkml.kernel.org/r/20180602103653.18181-17-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Morris <james.morris@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 05:00:50 +00:00
return sigismember(&tsk->pending.signal, SIGKILL) ||
sigismember(&tsk->signal->shared_pending.signal, SIGKILL);
Add arch_ptrace_stop This adds support to allow asm/ptrace.h to define two new macros, arch_ptrace_stop_needed and arch_ptrace_stop. These control special machine-specific actions to be done before a ptrace stop. The new code compiles away to nothing when the new macros are not defined. This is the case on all machines to begin with. On ia64, these macros will be defined to solve the long-standing issue of ptrace vs register backing store. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Petr Tesarik <ptesarik@suse.cz> Cc: Tony Luck <tony.luck@intel.com> Cc: Matthew Wilcox <willy@debian.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 09:37:37 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* This must be called with current->sighand->siglock held.
*
* This should be the path for all ptrace stops.
* We always set current->last_siginfo while stopped here.
* That makes it a way to test a stopped process for
* being ptrace-stopped vs being job-control-stopped.
*
ptrace_stop: fix racy nonstop_code setting If the tracer is gone and we are not going to stop, ptrace_stop() sets ->exit_code = nostop_code. However, the tracer could actually clear the exit code before detaching. In that case get_signal_to_deliver() "resends" the signal which was cancelled by the debugger. For example, it is possible that a quick PTRACE_ATTACH + PTRACE_DETACH can leave the tracee in STOPPED state. Change the behaviour of ptrace_stop(). If the caller is ptrace notify(), we should always clear ->exit_code. If the caller is get_signal_to_deliver(), we should not touch it at all. To do so, change the nonstop_code parameter to "bool clear_code" and change the callers accordingly. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 12:19:03 +00:00
* If we actually decide not to stop at all because the tracer
* is gone, we keep current->exit_code unless clear_code.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
static void ptrace_stop(int exit_code, int why, int clear_code, kernel_siginfo_t *info)
signals: annotate lock context change on ptrace_stop() ptrace_stop() releases and regrabs current->sighand->siglock but was missing proper annotation. Add it. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Acked-by: Roland McGrath <roland@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 22:34:07 +00:00
__releases(&current->sighand->siglock)
__acquires(&current->sighand->siglock)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
job control: Notify the real parent of job control events regardless of ptrace With recent changes, job control and ptrace stopped states are properly separated and accessible to the real parent and the ptracer respectively; however, notifications of job control stopped/continued events to the real parent while ptraced are still missing. A ptracee participates in group stop in ptrace_stop() but the completion isn't notified. If participation results in completion of group stop, notify the real parent of the event. The ptrace and group stops are separate and can be handled as such. However, when the real parent and the ptracer are in the same thread group, only the ptrace stop event is visible through wait(2) and the duplicate notifications are different from the current behavior and are confusing. Suppress group stop notification in such cases. The continued state is shared between the real parent and the ptracer but is only meaningful to the real parent. Always notify the real parent and notify the ptracer too for backward compatibility. Similar to stop notification, if the real parent is the ptracer, suppress a duplicate notification. Test case follows. #include <stdio.h> #include <unistd.h> #include <time.h> #include <errno.h> #include <sys/types.h> #include <sys/ptrace.h> #include <sys/wait.h> int main(void) { const struct timespec ts100ms = { .tv_nsec = 100000000 }; pid_t tracee, tracer; siginfo_t si; int i; tracee = fork(); if (tracee == 0) { while (1) { printf("tracee: SIGSTOP\n"); raise(SIGSTOP); nanosleep(&ts100ms, NULL); printf("tracee: SIGCONT\n"); raise(SIGCONT); nanosleep(&ts100ms, NULL); } } waitid(P_PID, tracee, &si, WSTOPPED | WNOHANG | WNOWAIT); tracer = fork(); if (tracer == 0) { nanosleep(&ts100ms, NULL); ptrace(PTRACE_ATTACH, tracee, NULL, NULL); for (i = 0; i < 11; i++) { si.si_pid = 0; waitid(P_PID, tracee, &si, WSTOPPED); if (si.si_pid && si.si_code == CLD_TRAPPED) ptrace(PTRACE_CONT, tracee, NULL, (void *)(long)si.si_status); } printf("tracer: EXITING\n"); return 0; } while (1) { si.si_pid = 0; waitid(P_PID, tracee, &si, WSTOPPED | WCONTINUED | WEXITED); if (si.si_pid) printf("mommy : WAIT status=%02d code=%02d\n", si.si_status, si.si_code); } return 0; } Before this patch, while ptraced, the real parent doesn't get notifications for job control events, so although it can access those events, the later waitid(2) call never wakes up. tracee: SIGSTOP mommy : WAIT status=19 code=05 tracee: SIGCONT tracee: SIGSTOP tracee: SIGCONT tracee: SIGSTOP tracee: SIGCONT tracee: SIGSTOP tracer: EXITING mommy : WAIT status=19 code=05 ^C After this patch, it works as expected. tracee: SIGSTOP mommy : WAIT status=19 code=05 tracee: SIGCONT mommy : WAIT status=18 code=06 tracee: SIGSTOP mommy : WAIT status=19 code=05 tracee: SIGCONT mommy : WAIT status=18 code=06 tracee: SIGSTOP mommy : WAIT status=19 code=05 tracee: SIGCONT mommy : WAIT status=18 code=06 tracee: SIGSTOP tracer: EXITING mommy : WAIT status=19 code=05 ^C -v2: Oleg pointed out that * Group stop notification to the real parent should also happen when ptracer detach races with ptrace_stop(). * real_parent_is_ptracer() should be testing thread group equality not the task itself as wait(2) and stop/cont notifications are normally thread-group wide. Both issues are fixed accordingly. -v3: real_parent_is_ptracer() updated to test child->real_parent instead of child->group_leader->real_parent per Oleg's suggestion. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com>
2011-03-23 09:37:01 +00:00
bool gstop_done = false;
Add arch_ptrace_stop This adds support to allow asm/ptrace.h to define two new macros, arch_ptrace_stop_needed and arch_ptrace_stop. These control special machine-specific actions to be done before a ptrace stop. The new code compiles away to nothing when the new macros are not defined. This is the case on all machines to begin with. On ia64, these macros will be defined to solve the long-standing issue of ptrace vs register backing store. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Petr Tesarik <ptesarik@suse.cz> Cc: Tony Luck <tony.luck@intel.com> Cc: Matthew Wilcox <willy@debian.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 09:37:37 +00:00
if (arch_ptrace_stop_needed(exit_code, info)) {
/*
* The arch code has something special to do before a
* ptrace stop. This is allowed to block, e.g. for faults
* on user stack pages. We can't keep the siglock while
* calling arch_ptrace_stop, so we must release it now.
* To preserve proper semantics, we must do this before
* any signal bookkeeping like checking group_stop_count.
* Meanwhile, a SIGKILL could come in before we retake the
* siglock. That must prevent us from sleeping in TASK_TRACED.
* So after regaining the lock, we must check for SIGKILL.
*/
spin_unlock_irq(&current->sighand->siglock);
arch_ptrace_stop(exit_code, info);
spin_lock_irq(&current->sighand->siglock);
ptrace: simplify ptrace_stop()->sigkill_pending() path 1. SIGKILL can't be blocked, remove this check from sigkill_pending(). 2. When ptrace_stop() sees sigkill_pending() == T, it can just return. Kill "int killed" and simplify the code. This also is more correct, the tracer shouldn't see us in TASK_TRACED if we are not going to stop. I strongly believe this code needs further changes. We should do the "was this task killed" check unconditionally, currently it depends on arch_ptrace_stop_needed(). On the other hand, sigkill_pending() isn't very clever. If the task was killed tkill(SIGKILL), the signal can be already dequeued if the caller is do_exit(). Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 08:47:37 +00:00
if (sigkill_pending(current))
return;
Add arch_ptrace_stop This adds support to allow asm/ptrace.h to define two new macros, arch_ptrace_stop_needed and arch_ptrace_stop. These control special machine-specific actions to be done before a ptrace stop. The new code compiles away to nothing when the new macros are not defined. This is the case on all machines to begin with. On ia64, these macros will be defined to solve the long-standing issue of ptrace vs register backing store. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Petr Tesarik <ptesarik@suse.cz> Cc: Tony Luck <tony.luck@intel.com> Cc: Matthew Wilcox <willy@debian.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 09:37:37 +00:00
}
sched/core: Introduce set_special_state() Gaurav reported a perceived problem with TASK_PARKED, which turned out to be a broken wait-loop pattern in __kthread_parkme(), but the reported issue can (and does) in fact happen for states that do not do condition based sleeps. When the 'current->state = TASK_RUNNING' store of a previous (concurrent) try_to_wake_up() collides with the setting of a 'special' sleep state, we can loose the sleep state. Normal condition based wait-loops are immune to this problem, but for sleep states that are not condition based are subject to this problem. There already is a fix for TASK_DEAD. Abstract that and also apply it to TASK_STOPPED and TASK_TRACED, both of which are also without condition based wait-loop. Reported-by: Gaurav Kohli <gkohli@codeaurora.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-30 12:51:01 +00:00
set_special_state(TASK_TRACED);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
ptrace: relocate set_current_state(TASK_TRACED) in ptrace_stop() In ptrace_stop(), after arch hook is done, the task state and jobctl bits are updated while holding siglock. The ordering requirement there is that TASK_TRACED is set before JOBCTL_TRAPPING is cleared to prevent ptracer waiting on TRAPPING doesn't end up waking up TRACED is actually set and sees TASK_RUNNING in wait(2). Move set_current_state(TASK_TRACED) to the top of the block and reorganize comments. This makes the ordering more obvious (TASK_TRACED before other updates) and helps future updates to group stop participation. This patch doesn't cause any functional change. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-02 09:13:59 +00:00
* We're committing to trapping. TRACED should be visible before
* TRAPPING is cleared; otherwise, the tracer might fail do_wait().
* Also, transition to TRACED and updates to ->jobctl should be
* atomic with respect to siglock and should be done after the arch
* hook as siglock is released and regrabbed across it.
sched/core: Introduce set_special_state() Gaurav reported a perceived problem with TASK_PARKED, which turned out to be a broken wait-loop pattern in __kthread_parkme(), but the reported issue can (and does) in fact happen for states that do not do condition based sleeps. When the 'current->state = TASK_RUNNING' store of a previous (concurrent) try_to_wake_up() collides with the setting of a 'special' sleep state, we can loose the sleep state. Normal condition based wait-loops are immune to this problem, but for sleep states that are not condition based are subject to this problem. There already is a fix for TASK_DEAD. Abstract that and also apply it to TASK_STOPPED and TASK_TRACED, both of which are also without condition based wait-loop. Reported-by: Gaurav Kohli <gkohli@codeaurora.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-30 12:51:01 +00:00
*
* TRACER TRACEE
*
* ptrace_attach()
* [L] wait_on_bit(JOBCTL_TRAPPING) [S] set_special_state(TRACED)
* do_wait()
* set_current_state() smp_wmb();
* ptrace_do_wait()
* wait_task_stopped()
* task_stopped_code()
* [L] task_is_traced() [S] task_clear_jobctl_trapping();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
sched/core: Introduce set_special_state() Gaurav reported a perceived problem with TASK_PARKED, which turned out to be a broken wait-loop pattern in __kthread_parkme(), but the reported issue can (and does) in fact happen for states that do not do condition based sleeps. When the 'current->state = TASK_RUNNING' store of a previous (concurrent) try_to_wake_up() collides with the setting of a 'special' sleep state, we can loose the sleep state. Normal condition based wait-loops are immune to this problem, but for sleep states that are not condition based are subject to this problem. There already is a fix for TASK_DEAD. Abstract that and also apply it to TASK_STOPPED and TASK_TRACED, both of which are also without condition based wait-loop. Reported-by: Gaurav Kohli <gkohli@codeaurora.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-30 12:51:01 +00:00
smp_wmb();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
current->last_siginfo = info;
current->exit_code = exit_code;
ptrace: Clean transitions between TASK_STOPPED and TRACED Currently, if the task is STOPPED on ptrace attach, it's left alone and the state is silently changed to TRACED on the next ptrace call. The behavior breaks the assumption that arch_ptrace_stop() is called before any task is poked by ptrace and is ugly in that a task manipulates the state of another task directly. With GROUP_STOP_PENDING, the transitions between TASK_STOPPED and TRACED can be made clean. The tracer can use the flag to tell the tracee to retry stop on attach and detach. On retry, the tracee will enter the desired state in the correct way. The lower 16bits of task->group_stop is used to remember the signal number which caused the last group stop. This is used while retrying for ptrace attach as the original group_exit_code could have been consumed with wait(2) by then. As the real parent may wait(2) and consume the group_exit_code anytime, the group_exit_code needs to be saved separately so that it can be used when switching from regular sleep to ptrace_stop(). This is recorded in the lower 16bits of task->group_stop. If a task is already stopped and there's no intervening SIGCONT, a ptrace request immediately following a successful PTRACE_ATTACH should always succeed even if the tracer doesn't wait(2) for attach completion; however, with this change, the tracee might still be TASK_RUNNING trying to enter TASK_TRACED which would cause the following request to fail with -ESRCH. This intermediate state is hidden from the ptracer by setting GROUP_STOP_TRAPPING on attach and making ptrace_check_attach() wait for it to clear on its signal->wait_chldexit. Completing the transition or getting killed clears TRAPPING and wakes up the tracer. Note that the STOPPED -> RUNNING -> TRACED transition is still visible to other threads which are in the same group as the ptracer and the reverse transition is visible to all. Please read the comments for details. Oleg: * Spotted a race condition where a task may retry group stop without proper bookkeeping. Fixed by redoing bookkeeping on retry. * Spotted that the transition is visible to userland in several different ways. Most are fixed with GROUP_STOP_TRAPPING. Unhandled corner case is documented. * Pointed out not setting GROUP_STOP_SIGMASK on an already stopped task would result in more consistent behavior. * Pointed out that calling ptrace_stop() from do_signal_stop() in TASK_STOPPED can race with group stop start logic and then confuse the TRAPPING wait in ptrace_check_attach(). ptrace_stop() is now called with TASK_RUNNING. * Suggested using signal->wait_chldexit instead of bit wait. * Spotted a race condition between TRACED transition and clearing of TRAPPING. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
2011-03-23 09:37:00 +00:00
/*
ptrace: Participate in group stop from ptrace_stop() iff the task is trapping for group stop Currently, ptrace_stop() unconditionally participates in group stop bookkeeping. This is unnecessary and inaccurate. Make it only participate if the task is trapping for group stop - ie. if @why is CLD_STOPPED. As ptrace_stop() currently is not used when trapping for group stop, this equals to disabling group stop participation from ptrace_stop(). A visible behavior change is increased likelihood of delayed group stop completion if the thread group contains one or more ptraced tasks. This is to preapre for further cleanup of the interaction between group stop and ptrace. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com>
2011-03-23 09:37:00 +00:00
* If @why is CLD_STOPPED, we're trapping to participate in a group
* stop. Do the bookkeeping. Note that if SIGCONT was delievered
job control: introduce JOBCTL_TRAP_STOP and use it for group stop trap do_signal_stop() implemented both normal group stop and trap for group stop while ptraced. This approach has been enough but scheduled changes require trap mechanism which can be used in more generic manner and using group stop trap for generic trap site simplifies both userland visible interface and implementation. This patch adds a new jobctl flag - JOBCTL_TRAP_STOP. When set, it triggers a trap site, which behaves like group stop trap, in get_signal_to_deliver() after checking for pending signals. While ptraced, do_signal_stop() doesn't stop itself. It initiates group stop if requested and schedules JOBCTL_TRAP_STOP and returns. The caller - get_signal_to_deliver() - is responsible for checking whether TRAP_STOP is pending afterwards and handling it. ptrace_attach() is updated to use JOBCTL_TRAP_STOP instead of JOBCTL_STOP_PENDING and __ptrace_unlink() to clear all pending trap bits and TRAPPING so that TRAP_STOP and future trap bits don't linger after detach. While at it, add proper function comment to do_signal_stop() and make it return bool. -v2: __ptrace_unlink() updated to clear JOBCTL_TRAP_MASK and TRAPPING instead of JOBCTL_PENDING_MASK. This avoids accidentally clearing JOBCTL_STOP_CONSUME. Spotted by Oleg. -v3: do_signal_stop() updated to return %false without dropping siglock while ptraced and TRAP_STOP check moved inside for(;;) loop after group stop participation. This avoids unnecessary relocking and also will help avoiding unnecessary traps by consuming group stop before handling pending traps. -v4: Jobctl trap handling moved into a separate function - do_jobctl_trap(). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 09:20:14 +00:00
* across siglock relocks since INTERRUPT was scheduled, PENDING
* could be clear now. We act as if SIGCONT is received after
* TASK_TRACED is entered - ignore it.
ptrace: Clean transitions between TASK_STOPPED and TRACED Currently, if the task is STOPPED on ptrace attach, it's left alone and the state is silently changed to TRACED on the next ptrace call. The behavior breaks the assumption that arch_ptrace_stop() is called before any task is poked by ptrace and is ugly in that a task manipulates the state of another task directly. With GROUP_STOP_PENDING, the transitions between TASK_STOPPED and TRACED can be made clean. The tracer can use the flag to tell the tracee to retry stop on attach and detach. On retry, the tracee will enter the desired state in the correct way. The lower 16bits of task->group_stop is used to remember the signal number which caused the last group stop. This is used while retrying for ptrace attach as the original group_exit_code could have been consumed with wait(2) by then. As the real parent may wait(2) and consume the group_exit_code anytime, the group_exit_code needs to be saved separately so that it can be used when switching from regular sleep to ptrace_stop(). This is recorded in the lower 16bits of task->group_stop. If a task is already stopped and there's no intervening SIGCONT, a ptrace request immediately following a successful PTRACE_ATTACH should always succeed even if the tracer doesn't wait(2) for attach completion; however, with this change, the tracee might still be TASK_RUNNING trying to enter TASK_TRACED which would cause the following request to fail with -ESRCH. This intermediate state is hidden from the ptracer by setting GROUP_STOP_TRAPPING on attach and making ptrace_check_attach() wait for it to clear on its signal->wait_chldexit. Completing the transition or getting killed clears TRAPPING and wakes up the tracer. Note that the STOPPED -> RUNNING -> TRACED transition is still visible to other threads which are in the same group as the ptracer and the reverse transition is visible to all. Please read the comments for details. Oleg: * Spotted a race condition where a task may retry group stop without proper bookkeeping. Fixed by redoing bookkeeping on retry. * Spotted that the transition is visible to userland in several different ways. Most are fixed with GROUP_STOP_TRAPPING. Unhandled corner case is documented. * Pointed out not setting GROUP_STOP_SIGMASK on an already stopped task would result in more consistent behavior. * Pointed out that calling ptrace_stop() from do_signal_stop() in TASK_STOPPED can race with group stop start logic and then confuse the TRAPPING wait in ptrace_check_attach(). ptrace_stop() is now called with TASK_RUNNING. * Suggested using signal->wait_chldexit instead of bit wait. * Spotted a race condition between TRACED transition and clearing of TRAPPING. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
2011-03-23 09:37:00 +00:00
*/
job control: rename signal->group_stop and flags to jobctl and update them signal->group_stop currently hosts mostly group stop related flags; however, it's gonna be used for wider purposes and the GROUP_STOP_ flag prefix becomes confusing. Rename signal->group_stop to signal->jobctl and rename all GROUP_STOP_* flags to JOBCTL_*. Bit position macros JOBCTL_*_BIT are defined and JOBCTL_* flags are defined in terms of them to allow using bitops later. While at it, reassign JOBCTL_TRAPPING to bit 22 to better accomodate future additions. This doesn't cause any functional change. -v2: JOBCTL_*_BIT macros added as suggested by Linus. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-02 09:13:59 +00:00
if (why == CLD_STOPPED && (current->jobctl & JOBCTL_STOP_PENDING))
job control: Notify the real parent of job control events regardless of ptrace With recent changes, job control and ptrace stopped states are properly separated and accessible to the real parent and the ptracer respectively; however, notifications of job control stopped/continued events to the real parent while ptraced are still missing. A ptracee participates in group stop in ptrace_stop() but the completion isn't notified. If participation results in completion of group stop, notify the real parent of the event. The ptrace and group stops are separate and can be handled as such. However, when the real parent and the ptracer are in the same thread group, only the ptrace stop event is visible through wait(2) and the duplicate notifications are different from the current behavior and are confusing. Suppress group stop notification in such cases. The continued state is shared between the real parent and the ptracer but is only meaningful to the real parent. Always notify the real parent and notify the ptracer too for backward compatibility. Similar to stop notification, if the real parent is the ptracer, suppress a duplicate notification. Test case follows. #include <stdio.h> #include <unistd.h> #include <time.h> #include <errno.h> #include <sys/types.h> #include <sys/ptrace.h> #include <sys/wait.h> int main(void) { const struct timespec ts100ms = { .tv_nsec = 100000000 }; pid_t tracee, tracer; siginfo_t si; int i; tracee = fork(); if (tracee == 0) { while (1) { printf("tracee: SIGSTOP\n"); raise(SIGSTOP); nanosleep(&ts100ms, NULL); printf("tracee: SIGCONT\n"); raise(SIGCONT); nanosleep(&ts100ms, NULL); } } waitid(P_PID, tracee, &si, WSTOPPED | WNOHANG | WNOWAIT); tracer = fork(); if (tracer == 0) { nanosleep(&ts100ms, NULL); ptrace(PTRACE_ATTACH, tracee, NULL, NULL); for (i = 0; i < 11; i++) { si.si_pid = 0; waitid(P_PID, tracee, &si, WSTOPPED); if (si.si_pid && si.si_code == CLD_TRAPPED) ptrace(PTRACE_CONT, tracee, NULL, (void *)(long)si.si_status); } printf("tracer: EXITING\n"); return 0; } while (1) { si.si_pid = 0; waitid(P_PID, tracee, &si, WSTOPPED | WCONTINUED | WEXITED); if (si.si_pid) printf("mommy : WAIT status=%02d code=%02d\n", si.si_status, si.si_code); } return 0; } Before this patch, while ptraced, the real parent doesn't get notifications for job control events, so although it can access those events, the later waitid(2) call never wakes up. tracee: SIGSTOP mommy : WAIT status=19 code=05 tracee: SIGCONT tracee: SIGSTOP tracee: SIGCONT tracee: SIGSTOP tracee: SIGCONT tracee: SIGSTOP tracer: EXITING mommy : WAIT status=19 code=05 ^C After this patch, it works as expected. tracee: SIGSTOP mommy : WAIT status=19 code=05 tracee: SIGCONT mommy : WAIT status=18 code=06 tracee: SIGSTOP mommy : WAIT status=19 code=05 tracee: SIGCONT mommy : WAIT status=18 code=06 tracee: SIGSTOP mommy : WAIT status=19 code=05 tracee: SIGCONT mommy : WAIT status=18 code=06 tracee: SIGSTOP tracer: EXITING mommy : WAIT status=19 code=05 ^C -v2: Oleg pointed out that * Group stop notification to the real parent should also happen when ptracer detach races with ptrace_stop(). * real_parent_is_ptracer() should be testing thread group equality not the task itself as wait(2) and stop/cont notifications are normally thread-group wide. Both issues are fixed accordingly. -v3: real_parent_is_ptracer() updated to test child->real_parent instead of child->group_leader->real_parent per Oleg's suggestion. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com>
2011-03-23 09:37:01 +00:00
gstop_done = task_participate_group_stop(current);
ptrace: Clean transitions between TASK_STOPPED and TRACED Currently, if the task is STOPPED on ptrace attach, it's left alone and the state is silently changed to TRACED on the next ptrace call. The behavior breaks the assumption that arch_ptrace_stop() is called before any task is poked by ptrace and is ugly in that a task manipulates the state of another task directly. With GROUP_STOP_PENDING, the transitions between TASK_STOPPED and TRACED can be made clean. The tracer can use the flag to tell the tracee to retry stop on attach and detach. On retry, the tracee will enter the desired state in the correct way. The lower 16bits of task->group_stop is used to remember the signal number which caused the last group stop. This is used while retrying for ptrace attach as the original group_exit_code could have been consumed with wait(2) by then. As the real parent may wait(2) and consume the group_exit_code anytime, the group_exit_code needs to be saved separately so that it can be used when switching from regular sleep to ptrace_stop(). This is recorded in the lower 16bits of task->group_stop. If a task is already stopped and there's no intervening SIGCONT, a ptrace request immediately following a successful PTRACE_ATTACH should always succeed even if the tracer doesn't wait(2) for attach completion; however, with this change, the tracee might still be TASK_RUNNING trying to enter TASK_TRACED which would cause the following request to fail with -ESRCH. This intermediate state is hidden from the ptracer by setting GROUP_STOP_TRAPPING on attach and making ptrace_check_attach() wait for it to clear on its signal->wait_chldexit. Completing the transition or getting killed clears TRAPPING and wakes up the tracer. Note that the STOPPED -> RUNNING -> TRACED transition is still visible to other threads which are in the same group as the ptracer and the reverse transition is visible to all. Please read the comments for details. Oleg: * Spotted a race condition where a task may retry group stop without proper bookkeeping. Fixed by redoing bookkeeping on retry. * Spotted that the transition is visible to userland in several different ways. Most are fixed with GROUP_STOP_TRAPPING. Unhandled corner case is documented. * Pointed out not setting GROUP_STOP_SIGMASK on an already stopped task would result in more consistent behavior. * Pointed out that calling ptrace_stop() from do_signal_stop() in TASK_STOPPED can race with group stop start logic and then confuse the TRAPPING wait in ptrace_check_attach(). ptrace_stop() is now called with TASK_RUNNING. * Suggested using signal->wait_chldexit instead of bit wait. * Spotted a race condition between TRACED transition and clearing of TRAPPING. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
2011-03-23 09:37:00 +00:00
ptrace: implement TRAP_NOTIFY and use it for group stop events Currently there's no way for ptracer to find out whether group stop finished other than polling with INTERRUPT - GETSIGINFO - CONT sequence. This patch implements group stop notification for ptracer using STOP traps. When group stop state of a seized tracee changes, JOBCTL_TRAP_NOTIFY is set, which schedules a STOP trap which is sticky - it isn't cleared by other traps and at least one STOP trap will happen eventually. STOP trap is synchronization point for event notification and the tracer can determine the current group stop state by looking at the signal number portion of exit code (si_status from waitid(2) or si_code from PTRACE_GETSIGINFO). Notifications are generated both on start and end of group stops but, because group stop participation always happens before STOP trap, this doesn't cause an extra trap while tracee is participating in group stop. The symmetry will be useful later. Note that this notification works iff tracee is not trapped. Currently there is no way to be notified of group stop state changes while tracee is trapped. This will be addressed by a later patch. An example program follows. #define PTRACE_SEIZE 0x4206 #define PTRACE_INTERRUPT 0x4207 #define PTRACE_SEIZE_DEVEL 0x80000000 static const struct timespec ts1s = { .tv_sec = 1 }; int main(int argc, char **argv) { pid_t tracee, tracer; int i; tracee = fork(); if (!tracee) while (1) pause(); tracer = fork(); if (!tracer) { siginfo_t si; ptrace(PTRACE_SEIZE, tracee, NULL, (void *)(unsigned long)PTRACE_SEIZE_DEVEL); ptrace(PTRACE_INTERRUPT, tracee, NULL, NULL); repeat: waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_GETSIGINFO, tracee, NULL, &si); if (!si.si_code) { printf("tracer: SIG %d\n", si.si_signo); ptrace(PTRACE_CONT, tracee, NULL, (void *)(unsigned long)si.si_signo); goto repeat; } printf("tracer: stopped=%d signo=%d\n", si.si_signo != SIGTRAP, si.si_signo); ptrace(PTRACE_CONT, tracee, NULL, NULL); goto repeat; } for (i = 0; i < 3; i++) { nanosleep(&ts1s, NULL); printf("mother: SIGSTOP\n"); kill(tracee, SIGSTOP); nanosleep(&ts1s, NULL); printf("mother: SIGCONT\n"); kill(tracee, SIGCONT); } nanosleep(&ts1s, NULL); kill(tracer, SIGKILL); kill(tracee, SIGKILL); return 0; } In the above program, tracer keeps tracee running and gets notification of each group stop state changes. # ./test-notify tracer: stopped=0 signo=5 mother: SIGSTOP tracer: SIG 19 tracer: stopped=1 signo=19 mother: SIGCONT tracer: stopped=0 signo=5 tracer: SIG 18 mother: SIGSTOP tracer: SIG 19 tracer: stopped=1 signo=19 mother: SIGCONT tracer: stopped=0 signo=5 tracer: SIG 18 mother: SIGSTOP tracer: SIG 19 tracer: stopped=1 signo=19 mother: SIGCONT tracer: stopped=0 signo=5 tracer: SIG 18 Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 09:20:17 +00:00
/* any trap clears pending STOP trap, STOP trap clears NOTIFY */
job control: introduce JOBCTL_TRAP_STOP and use it for group stop trap do_signal_stop() implemented both normal group stop and trap for group stop while ptraced. This approach has been enough but scheduled changes require trap mechanism which can be used in more generic manner and using group stop trap for generic trap site simplifies both userland visible interface and implementation. This patch adds a new jobctl flag - JOBCTL_TRAP_STOP. When set, it triggers a trap site, which behaves like group stop trap, in get_signal_to_deliver() after checking for pending signals. While ptraced, do_signal_stop() doesn't stop itself. It initiates group stop if requested and schedules JOBCTL_TRAP_STOP and returns. The caller - get_signal_to_deliver() - is responsible for checking whether TRAP_STOP is pending afterwards and handling it. ptrace_attach() is updated to use JOBCTL_TRAP_STOP instead of JOBCTL_STOP_PENDING and __ptrace_unlink() to clear all pending trap bits and TRAPPING so that TRAP_STOP and future trap bits don't linger after detach. While at it, add proper function comment to do_signal_stop() and make it return bool. -v2: __ptrace_unlink() updated to clear JOBCTL_TRAP_MASK and TRAPPING instead of JOBCTL_PENDING_MASK. This avoids accidentally clearing JOBCTL_STOP_CONSUME. Spotted by Oleg. -v3: do_signal_stop() updated to return %false without dropping siglock while ptraced and TRAP_STOP check moved inside for(;;) loop after group stop participation. This avoids unnecessary relocking and also will help avoiding unnecessary traps by consuming group stop before handling pending traps. -v4: Jobctl trap handling moved into a separate function - do_jobctl_trap(). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 09:20:14 +00:00
task_clear_jobctl_pending(current, JOBCTL_TRAP_STOP);
ptrace: implement TRAP_NOTIFY and use it for group stop events Currently there's no way for ptracer to find out whether group stop finished other than polling with INTERRUPT - GETSIGINFO - CONT sequence. This patch implements group stop notification for ptracer using STOP traps. When group stop state of a seized tracee changes, JOBCTL_TRAP_NOTIFY is set, which schedules a STOP trap which is sticky - it isn't cleared by other traps and at least one STOP trap will happen eventually. STOP trap is synchronization point for event notification and the tracer can determine the current group stop state by looking at the signal number portion of exit code (si_status from waitid(2) or si_code from PTRACE_GETSIGINFO). Notifications are generated both on start and end of group stops but, because group stop participation always happens before STOP trap, this doesn't cause an extra trap while tracee is participating in group stop. The symmetry will be useful later. Note that this notification works iff tracee is not trapped. Currently there is no way to be notified of group stop state changes while tracee is trapped. This will be addressed by a later patch. An example program follows. #define PTRACE_SEIZE 0x4206 #define PTRACE_INTERRUPT 0x4207 #define PTRACE_SEIZE_DEVEL 0x80000000 static const struct timespec ts1s = { .tv_sec = 1 }; int main(int argc, char **argv) { pid_t tracee, tracer; int i; tracee = fork(); if (!tracee) while (1) pause(); tracer = fork(); if (!tracer) { siginfo_t si; ptrace(PTRACE_SEIZE, tracee, NULL, (void *)(unsigned long)PTRACE_SEIZE_DEVEL); ptrace(PTRACE_INTERRUPT, tracee, NULL, NULL); repeat: waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_GETSIGINFO, tracee, NULL, &si); if (!si.si_code) { printf("tracer: SIG %d\n", si.si_signo); ptrace(PTRACE_CONT, tracee, NULL, (void *)(unsigned long)si.si_signo); goto repeat; } printf("tracer: stopped=%d signo=%d\n", si.si_signo != SIGTRAP, si.si_signo); ptrace(PTRACE_CONT, tracee, NULL, NULL); goto repeat; } for (i = 0; i < 3; i++) { nanosleep(&ts1s, NULL); printf("mother: SIGSTOP\n"); kill(tracee, SIGSTOP); nanosleep(&ts1s, NULL); printf("mother: SIGCONT\n"); kill(tracee, SIGCONT); } nanosleep(&ts1s, NULL); kill(tracer, SIGKILL); kill(tracee, SIGKILL); return 0; } In the above program, tracer keeps tracee running and gets notification of each group stop state changes. # ./test-notify tracer: stopped=0 signo=5 mother: SIGSTOP tracer: SIG 19 tracer: stopped=1 signo=19 mother: SIGCONT tracer: stopped=0 signo=5 tracer: SIG 18 mother: SIGSTOP tracer: SIG 19 tracer: stopped=1 signo=19 mother: SIGCONT tracer: stopped=0 signo=5 tracer: SIG 18 mother: SIGSTOP tracer: SIG 19 tracer: stopped=1 signo=19 mother: SIGCONT tracer: stopped=0 signo=5 tracer: SIG 18 Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 09:20:17 +00:00
if (info && info->si_code >> 8 == PTRACE_EVENT_STOP)
task_clear_jobctl_pending(current, JOBCTL_TRAP_NOTIFY);
job control: introduce JOBCTL_TRAP_STOP and use it for group stop trap do_signal_stop() implemented both normal group stop and trap for group stop while ptraced. This approach has been enough but scheduled changes require trap mechanism which can be used in more generic manner and using group stop trap for generic trap site simplifies both userland visible interface and implementation. This patch adds a new jobctl flag - JOBCTL_TRAP_STOP. When set, it triggers a trap site, which behaves like group stop trap, in get_signal_to_deliver() after checking for pending signals. While ptraced, do_signal_stop() doesn't stop itself. It initiates group stop if requested and schedules JOBCTL_TRAP_STOP and returns. The caller - get_signal_to_deliver() - is responsible for checking whether TRAP_STOP is pending afterwards and handling it. ptrace_attach() is updated to use JOBCTL_TRAP_STOP instead of JOBCTL_STOP_PENDING and __ptrace_unlink() to clear all pending trap bits and TRAPPING so that TRAP_STOP and future trap bits don't linger after detach. While at it, add proper function comment to do_signal_stop() and make it return bool. -v2: __ptrace_unlink() updated to clear JOBCTL_TRAP_MASK and TRAPPING instead of JOBCTL_PENDING_MASK. This avoids accidentally clearing JOBCTL_STOP_CONSUME. Spotted by Oleg. -v3: do_signal_stop() updated to return %false without dropping siglock while ptraced and TRAP_STOP check moved inside for(;;) loop after group stop participation. This avoids unnecessary relocking and also will help avoiding unnecessary traps by consuming group stop before handling pending traps. -v4: Jobctl trap handling moved into a separate function - do_jobctl_trap(). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 09:20:14 +00:00
ptrace: relocate set_current_state(TASK_TRACED) in ptrace_stop() In ptrace_stop(), after arch hook is done, the task state and jobctl bits are updated while holding siglock. The ordering requirement there is that TASK_TRACED is set before JOBCTL_TRAPPING is cleared to prevent ptracer waiting on TRAPPING doesn't end up waking up TRACED is actually set and sees TASK_RUNNING in wait(2). Move set_current_state(TASK_TRACED) to the top of the block and reorganize comments. This makes the ordering more obvious (TASK_TRACED before other updates) and helps future updates to group stop participation. This patch doesn't cause any functional change. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-02 09:13:59 +00:00
/* entering a trap, clear TRAPPING */
job control: rename signal->group_stop and flags to jobctl and update them signal->group_stop currently hosts mostly group stop related flags; however, it's gonna be used for wider purposes and the GROUP_STOP_ flag prefix becomes confusing. Rename signal->group_stop to signal->jobctl and rename all GROUP_STOP_* flags to JOBCTL_*. Bit position macros JOBCTL_*_BIT are defined and JOBCTL_* flags are defined in terms of them to allow using bitops later. While at it, reassign JOBCTL_TRAPPING to bit 22 to better accomodate future additions. This doesn't cause any functional change. -v2: JOBCTL_*_BIT macros added as suggested by Linus. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-02 09:13:59 +00:00
task_clear_jobctl_trapping(current);
ptrace: Clean transitions between TASK_STOPPED and TRACED Currently, if the task is STOPPED on ptrace attach, it's left alone and the state is silently changed to TRACED on the next ptrace call. The behavior breaks the assumption that arch_ptrace_stop() is called before any task is poked by ptrace and is ugly in that a task manipulates the state of another task directly. With GROUP_STOP_PENDING, the transitions between TASK_STOPPED and TRACED can be made clean. The tracer can use the flag to tell the tracee to retry stop on attach and detach. On retry, the tracee will enter the desired state in the correct way. The lower 16bits of task->group_stop is used to remember the signal number which caused the last group stop. This is used while retrying for ptrace attach as the original group_exit_code could have been consumed with wait(2) by then. As the real parent may wait(2) and consume the group_exit_code anytime, the group_exit_code needs to be saved separately so that it can be used when switching from regular sleep to ptrace_stop(). This is recorded in the lower 16bits of task->group_stop. If a task is already stopped and there's no intervening SIGCONT, a ptrace request immediately following a successful PTRACE_ATTACH should always succeed even if the tracer doesn't wait(2) for attach completion; however, with this change, the tracee might still be TASK_RUNNING trying to enter TASK_TRACED which would cause the following request to fail with -ESRCH. This intermediate state is hidden from the ptracer by setting GROUP_STOP_TRAPPING on attach and making ptrace_check_attach() wait for it to clear on its signal->wait_chldexit. Completing the transition or getting killed clears TRAPPING and wakes up the tracer. Note that the STOPPED -> RUNNING -> TRACED transition is still visible to other threads which are in the same group as the ptracer and the reverse transition is visible to all. Please read the comments for details. Oleg: * Spotted a race condition where a task may retry group stop without proper bookkeeping. Fixed by redoing bookkeeping on retry. * Spotted that the transition is visible to userland in several different ways. Most are fixed with GROUP_STOP_TRAPPING. Unhandled corner case is documented. * Pointed out not setting GROUP_STOP_SIGMASK on an already stopped task would result in more consistent behavior. * Pointed out that calling ptrace_stop() from do_signal_stop() in TASK_STOPPED can race with group stop start logic and then confuse the TRAPPING wait in ptrace_check_attach(). ptrace_stop() is now called with TASK_RUNNING. * Suggested using signal->wait_chldexit instead of bit wait. * Spotted a race condition between TRACED transition and clearing of TRAPPING. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
2011-03-23 09:37:00 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
spin_unlock_irq(&current->sighand->siglock);
read_lock(&tasklist_lock);
ptrace: simplify ptrace_stop()->sigkill_pending() path 1. SIGKILL can't be blocked, remove this check from sigkill_pending(). 2. When ptrace_stop() sees sigkill_pending() == T, it can just return. Kill "int killed" and simplify the code. This also is more correct, the tracer shouldn't see us in TASK_TRACED if we are not going to stop. I strongly believe this code needs further changes. We should do the "was this task killed" check unconditionally, currently it depends on arch_ptrace_stop_needed(). On the other hand, sigkill_pending() isn't very clever. If the task was killed tkill(SIGKILL), the signal can be already dequeued if the caller is do_exit(). Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 08:47:37 +00:00
if (may_ptrace_stop()) {
job control: Notify the real parent of job control events regardless of ptrace With recent changes, job control and ptrace stopped states are properly separated and accessible to the real parent and the ptracer respectively; however, notifications of job control stopped/continued events to the real parent while ptraced are still missing. A ptracee participates in group stop in ptrace_stop() but the completion isn't notified. If participation results in completion of group stop, notify the real parent of the event. The ptrace and group stops are separate and can be handled as such. However, when the real parent and the ptracer are in the same thread group, only the ptrace stop event is visible through wait(2) and the duplicate notifications are different from the current behavior and are confusing. Suppress group stop notification in such cases. The continued state is shared between the real parent and the ptracer but is only meaningful to the real parent. Always notify the real parent and notify the ptracer too for backward compatibility. Similar to stop notification, if the real parent is the ptracer, suppress a duplicate notification. Test case follows. #include <stdio.h> #include <unistd.h> #include <time.h> #include <errno.h> #include <sys/types.h> #include <sys/ptrace.h> #include <sys/wait.h> int main(void) { const struct timespec ts100ms = { .tv_nsec = 100000000 }; pid_t tracee, tracer; siginfo_t si; int i; tracee = fork(); if (tracee == 0) { while (1) { printf("tracee: SIGSTOP\n"); raise(SIGSTOP); nanosleep(&ts100ms, NULL); printf("tracee: SIGCONT\n"); raise(SIGCONT); nanosleep(&ts100ms, NULL); } } waitid(P_PID, tracee, &si, WSTOPPED | WNOHANG | WNOWAIT); tracer = fork(); if (tracer == 0) { nanosleep(&ts100ms, NULL); ptrace(PTRACE_ATTACH, tracee, NULL, NULL); for (i = 0; i < 11; i++) { si.si_pid = 0; waitid(P_PID, tracee, &si, WSTOPPED); if (si.si_pid && si.si_code == CLD_TRAPPED) ptrace(PTRACE_CONT, tracee, NULL, (void *)(long)si.si_status); } printf("tracer: EXITING\n"); return 0; } while (1) { si.si_pid = 0; waitid(P_PID, tracee, &si, WSTOPPED | WCONTINUED | WEXITED); if (si.si_pid) printf("mommy : WAIT status=%02d code=%02d\n", si.si_status, si.si_code); } return 0; } Before this patch, while ptraced, the real parent doesn't get notifications for job control events, so although it can access those events, the later waitid(2) call never wakes up. tracee: SIGSTOP mommy : WAIT status=19 code=05 tracee: SIGCONT tracee: SIGSTOP tracee: SIGCONT tracee: SIGSTOP tracee: SIGCONT tracee: SIGSTOP tracer: EXITING mommy : WAIT status=19 code=05 ^C After this patch, it works as expected. tracee: SIGSTOP mommy : WAIT status=19 code=05 tracee: SIGCONT mommy : WAIT status=18 code=06 tracee: SIGSTOP mommy : WAIT status=19 code=05 tracee: SIGCONT mommy : WAIT status=18 code=06 tracee: SIGSTOP mommy : WAIT status=19 code=05 tracee: SIGCONT mommy : WAIT status=18 code=06 tracee: SIGSTOP tracer: EXITING mommy : WAIT status=19 code=05 ^C -v2: Oleg pointed out that * Group stop notification to the real parent should also happen when ptracer detach races with ptrace_stop(). * real_parent_is_ptracer() should be testing thread group equality not the task itself as wait(2) and stop/cont notifications are normally thread-group wide. Both issues are fixed accordingly. -v3: real_parent_is_ptracer() updated to test child->real_parent instead of child->group_leader->real_parent per Oleg's suggestion. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com>
2011-03-23 09:37:01 +00:00
/*
* Notify parents of the stop.
*
* While ptraced, there are two parents - the ptracer and
* the real_parent of the group_leader. The ptracer should
* know about every stop while the real parent is only
* interested in the completion of group stop. The states
* for the two don't interact with each other. Notify
* separately unless they're gonna be duplicates.
*/
do_notify_parent_cldstop(current, true, why);
ptrace: kill real_parent_is_ptracer() in in favor of ptrace_reparented() Kill real_parent_is_ptracer() and update the callers to use ptrace_reparented(), after the previous patch they do the same. Remove the unnecessary ->ptrace != 0 check in get_signal_to_deliver(), if ptrace_reparented() == T then the task must be ptraced. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-06-24 15:34:23 +00:00
if (gstop_done && ptrace_reparented(current))
job control: Notify the real parent of job control events regardless of ptrace With recent changes, job control and ptrace stopped states are properly separated and accessible to the real parent and the ptracer respectively; however, notifications of job control stopped/continued events to the real parent while ptraced are still missing. A ptracee participates in group stop in ptrace_stop() but the completion isn't notified. If participation results in completion of group stop, notify the real parent of the event. The ptrace and group stops are separate and can be handled as such. However, when the real parent and the ptracer are in the same thread group, only the ptrace stop event is visible through wait(2) and the duplicate notifications are different from the current behavior and are confusing. Suppress group stop notification in such cases. The continued state is shared between the real parent and the ptracer but is only meaningful to the real parent. Always notify the real parent and notify the ptracer too for backward compatibility. Similar to stop notification, if the real parent is the ptracer, suppress a duplicate notification. Test case follows. #include <stdio.h> #include <unistd.h> #include <time.h> #include <errno.h> #include <sys/types.h> #include <sys/ptrace.h> #include <sys/wait.h> int main(void) { const struct timespec ts100ms = { .tv_nsec = 100000000 }; pid_t tracee, tracer; siginfo_t si; int i; tracee = fork(); if (tracee == 0) { while (1) { printf("tracee: SIGSTOP\n"); raise(SIGSTOP); nanosleep(&ts100ms, NULL); printf("tracee: SIGCONT\n"); raise(SIGCONT); nanosleep(&ts100ms, NULL); } } waitid(P_PID, tracee, &si, WSTOPPED | WNOHANG | WNOWAIT); tracer = fork(); if (tracer == 0) { nanosleep(&ts100ms, NULL); ptrace(PTRACE_ATTACH, tracee, NULL, NULL); for (i = 0; i < 11; i++) { si.si_pid = 0; waitid(P_PID, tracee, &si, WSTOPPED); if (si.si_pid && si.si_code == CLD_TRAPPED) ptrace(PTRACE_CONT, tracee, NULL, (void *)(long)si.si_status); } printf("tracer: EXITING\n"); return 0; } while (1) { si.si_pid = 0; waitid(P_PID, tracee, &si, WSTOPPED | WCONTINUED | WEXITED); if (si.si_pid) printf("mommy : WAIT status=%02d code=%02d\n", si.si_status, si.si_code); } return 0; } Before this patch, while ptraced, the real parent doesn't get notifications for job control events, so although it can access those events, the later waitid(2) call never wakes up. tracee: SIGSTOP mommy : WAIT status=19 code=05 tracee: SIGCONT tracee: SIGSTOP tracee: SIGCONT tracee: SIGSTOP tracee: SIGCONT tracee: SIGSTOP tracer: EXITING mommy : WAIT status=19 code=05 ^C After this patch, it works as expected. tracee: SIGSTOP mommy : WAIT status=19 code=05 tracee: SIGCONT mommy : WAIT status=18 code=06 tracee: SIGSTOP mommy : WAIT status=19 code=05 tracee: SIGCONT mommy : WAIT status=18 code=06 tracee: SIGSTOP mommy : WAIT status=19 code=05 tracee: SIGCONT mommy : WAIT status=18 code=06 tracee: SIGSTOP tracer: EXITING mommy : WAIT status=19 code=05 ^C -v2: Oleg pointed out that * Group stop notification to the real parent should also happen when ptracer detach races with ptrace_stop(). * real_parent_is_ptracer() should be testing thread group equality not the task itself as wait(2) and stop/cont notifications are normally thread-group wide. Both issues are fixed accordingly. -v3: real_parent_is_ptracer() updated to test child->real_parent instead of child->group_leader->real_parent per Oleg's suggestion. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com>
2011-03-23 09:37:01 +00:00
do_notify_parent_cldstop(current, false, why);
fix ptrace slowness This patch fixes bug #12208: Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12208 Subject : uml is very slow on 2.6.28 host This turned out to be not a scheduler regression, but an already existing problem in ptrace being triggered by subtle scheduler changes. The problem is this: - task A is ptracing task B - task B stops on a trace event - task A is woken up and preempts task B - task A calls ptrace on task B, which does ptrace_check_attach() - this calls wait_task_inactive(), which sees that task B is still on the runq - task A goes to sleep for a jiffy - ... Since UML does lots of the above sequences, those jiffies quickly add up to make it slow as hell. This patch solves this by not rescheduling in read_unlock() after ptrace_stop() has woken up the tracer. Thanks to Oleg Nesterov and Ingo Molnar for the feedback. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-23 15:07:24 +00:00
/*
* Don't want to allow preemption here, because
* sys_ptrace() needs this task to be inactive.
*
* XXX: implement read_unlock_no_resched().
*/
preempt_disable();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
read_unlock(&tasklist_lock);
cgroup: cgroup v2 freezer Cgroup v1 implements the freezer controller, which provides an ability to stop the workload in a cgroup and temporarily free up some resources (cpu, io, network bandwidth and, potentially, memory) for some other tasks. Cgroup v2 lacks this functionality. This patch implements freezer for cgroup v2. Cgroup v2 freezer tries to put tasks into a state similar to jobctl stop. This means that tasks can be killed, ptraced (using PTRACE_SEIZE*), and interrupted. It is possible to attach to a frozen task, get some information (e.g. read registers) and detach. It's also possible to migrate a frozen tasks to another cgroup. This differs cgroup v2 freezer from cgroup v1 freezer, which mostly tried to imitate the system-wide freezer. However uninterruptible sleep is fine when all tasks are going to be frozen (hibernation case), it's not the acceptable state for some subset of the system. Cgroup v2 freezer is not supporting freezing kthreads. If a non-root cgroup contains kthread, the cgroup still can be frozen, but the kthread will remain running, the cgroup will be shown as non-frozen, and the notification will not be delivered. * PTRACE_ATTACH is not working because non-fatal signal delivery is blocked in frozen state. There are some interface differences between cgroup v1 and cgroup v2 freezer too, which are required to conform the cgroup v2 interface design principles: 1) There is no separate controller, which has to be turned on: the functionality is always available and is represented by cgroup.freeze and cgroup.events cgroup control files. 2) The desired state is defined by the cgroup.freeze control file. Any hierarchical configuration is allowed. 3) The interface is asynchronous. The actual state is available using cgroup.events control file ("frozen" field). There are no dedicated transitional states. 4) It's allowed to make any changes with the cgroup hierarchy (create new cgroups, remove old cgroups, move tasks between cgroups) no matter if some cgroups are frozen. Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org> No-objection-from-me-by: Oleg Nesterov <oleg@redhat.com> Cc: kernel-team@fb.com
2019-04-19 17:03:04 +00:00
cgroup_enter_frozen();
cgroup: freezer: call cgroup_enter_frozen() with preemption disabled in ptrace_stop() ptrace_stop() does preempt_enable_no_resched() to avoid the preemption, but after that cgroup_enter_frozen() does spin_lock/unlock and this adds another preemption point. Reported-and-tested-by: Bruce Ashfield <bruce.ashfield@gmail.com> Fixes: 76f969e8948d ("cgroup: cgroup v2 freezer") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Roman Gushchin <guro@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2019-10-09 15:02:30 +00:00
preempt_enable_no_resched();
freezer: change ptrace_stop/do_signal_stop to use freezable_schedule() try_to_freeze_tasks() and cgroup_freezer rely on scheduler locks to ensure that a task doing STOPPED/TRACED -> RUNNING transition can't escape freezing. This mostly works, but ptrace_stop() does not necessarily call schedule(), it can change task->state back to RUNNING and check freezing() without any lock/barrier in between. We could add the necessary barrier, but this patch changes ptrace_stop() and do_signal_stop() to use freezable_schedule(). This fixes the race, freezer_count() and freezer_should_skip() carefully avoid the race. And this simplifies the code, try_to_freeze_tasks/update_if_frozen no longer need to use task_is_stopped_or_traced() checks with the non trivial assumptions. We can rely on the mechanism which was specially designed to mark the sleeping task as "frozen enough". v2: As Tejun pointed out, we can also change get_signal_to_deliver() and move try_to_freeze() up before 'relock' label. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2012-10-26 17:46:06 +00:00
freezable_schedule();
signal: unconditionally leave the frozen state in ptrace_stop() Alex Xu reported a regression in strace, caused by the introduction of the cgroup v2 freezer. The regression can be reproduced by stracing the following simple program: #include <unistd.h> int main() { write(1, "a", 1); return 0; } An attempt to run strace ./a.out leads to the infinite loop: [ pre-main omitted ] write(1, "a", 1) = ? ERESTARTSYS (To be restarted if SA_RESTART is set) write(1, "a", 1) = ? ERESTARTSYS (To be restarted if SA_RESTART is set) write(1, "a", 1) = ? ERESTARTSYS (To be restarted if SA_RESTART is set) write(1, "a", 1) = ? ERESTARTSYS (To be restarted if SA_RESTART is set) write(1, "a", 1) = ? ERESTARTSYS (To be restarted if SA_RESTART is set) write(1, "a", 1) = ? ERESTARTSYS (To be restarted if SA_RESTART is set) [ repeats forever ] The problem occurs because the traced task leaves ptrace_stop() (and the signal handling loop) with the frozen bit set. So let's call cgroup_leave_frozen(true) unconditionally after sleeping in ptrace_stop(). With this patch applied, strace works as expected: [ pre-main omitted ] write(1, "a", 1) = 1 exit_group(0) = ? +++ exited with 0 +++ Reported-by: Alex Xu <alex_y_xu@yahoo.ca> Fixes: 76f969e8948d ("cgroup: cgroup v2 freezer") Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Tejun Heo <tj@kernel.org>
2019-05-16 17:38:21 +00:00
cgroup_leave_frozen(true);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
} else {
/*
* By the time we got the lock, our tracer went away.
ptrace_stop: fix the race with ptrace detach+attach If the tracer went away (may_ptrace_stop() failed), ptrace_stop() drops tasklist and then changes the ->state from TASK_TRACED to TASK_RUNNING. This can fool another tracer which attaches to us in between. Change the ->state under tasklist_lock to ensure that ptrace_check_attach() can't wrongly succeed. Also, remove the unnecessary mb(). Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 12:19:00 +00:00
* Don't drop the lock yet, another tracer may come.
job control: Notify the real parent of job control events regardless of ptrace With recent changes, job control and ptrace stopped states are properly separated and accessible to the real parent and the ptracer respectively; however, notifications of job control stopped/continued events to the real parent while ptraced are still missing. A ptracee participates in group stop in ptrace_stop() but the completion isn't notified. If participation results in completion of group stop, notify the real parent of the event. The ptrace and group stops are separate and can be handled as such. However, when the real parent and the ptracer are in the same thread group, only the ptrace stop event is visible through wait(2) and the duplicate notifications are different from the current behavior and are confusing. Suppress group stop notification in such cases. The continued state is shared between the real parent and the ptracer but is only meaningful to the real parent. Always notify the real parent and notify the ptracer too for backward compatibility. Similar to stop notification, if the real parent is the ptracer, suppress a duplicate notification. Test case follows. #include <stdio.h> #include <unistd.h> #include <time.h> #include <errno.h> #include <sys/types.h> #include <sys/ptrace.h> #include <sys/wait.h> int main(void) { const struct timespec ts100ms = { .tv_nsec = 100000000 }; pid_t tracee, tracer; siginfo_t si; int i; tracee = fork(); if (tracee == 0) { while (1) { printf("tracee: SIGSTOP\n"); raise(SIGSTOP); nanosleep(&ts100ms, NULL); printf("tracee: SIGCONT\n"); raise(SIGCONT); nanosleep(&ts100ms, NULL); } } waitid(P_PID, tracee, &si, WSTOPPED | WNOHANG | WNOWAIT); tracer = fork(); if (tracer == 0) { nanosleep(&ts100ms, NULL); ptrace(PTRACE_ATTACH, tracee, NULL, NULL); for (i = 0; i < 11; i++) { si.si_pid = 0; waitid(P_PID, tracee, &si, WSTOPPED); if (si.si_pid && si.si_code == CLD_TRAPPED) ptrace(PTRACE_CONT, tracee, NULL, (void *)(long)si.si_status); } printf("tracer: EXITING\n"); return 0; } while (1) { si.si_pid = 0; waitid(P_PID, tracee, &si, WSTOPPED | WCONTINUED | WEXITED); if (si.si_pid) printf("mommy : WAIT status=%02d code=%02d\n", si.si_status, si.si_code); } return 0; } Before this patch, while ptraced, the real parent doesn't get notifications for job control events, so although it can access those events, the later waitid(2) call never wakes up. tracee: SIGSTOP mommy : WAIT status=19 code=05 tracee: SIGCONT tracee: SIGSTOP tracee: SIGCONT tracee: SIGSTOP tracee: SIGCONT tracee: SIGSTOP tracer: EXITING mommy : WAIT status=19 code=05 ^C After this patch, it works as expected. tracee: SIGSTOP mommy : WAIT status=19 code=05 tracee: SIGCONT mommy : WAIT status=18 code=06 tracee: SIGSTOP mommy : WAIT status=19 code=05 tracee: SIGCONT mommy : WAIT status=18 code=06 tracee: SIGSTOP mommy : WAIT status=19 code=05 tracee: SIGCONT mommy : WAIT status=18 code=06 tracee: SIGSTOP tracer: EXITING mommy : WAIT status=19 code=05 ^C -v2: Oleg pointed out that * Group stop notification to the real parent should also happen when ptracer detach races with ptrace_stop(). * real_parent_is_ptracer() should be testing thread group equality not the task itself as wait(2) and stop/cont notifications are normally thread-group wide. Both issues are fixed accordingly. -v3: real_parent_is_ptracer() updated to test child->real_parent instead of child->group_leader->real_parent per Oleg's suggestion. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com>
2011-03-23 09:37:01 +00:00
*
* If @gstop_done, the ptracer went away between group stop
* completion and here. During detach, it would have set
job control: rename signal->group_stop and flags to jobctl and update them signal->group_stop currently hosts mostly group stop related flags; however, it's gonna be used for wider purposes and the GROUP_STOP_ flag prefix becomes confusing. Rename signal->group_stop to signal->jobctl and rename all GROUP_STOP_* flags to JOBCTL_*. Bit position macros JOBCTL_*_BIT are defined and JOBCTL_* flags are defined in terms of them to allow using bitops later. While at it, reassign JOBCTL_TRAPPING to bit 22 to better accomodate future additions. This doesn't cause any functional change. -v2: JOBCTL_*_BIT macros added as suggested by Linus. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-02 09:13:59 +00:00
* JOBCTL_STOP_PENDING on us and we'll re-enter
* TASK_STOPPED in do_signal_stop() on return, so notifying
* the real parent of the group stop completion is enough.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
job control: Notify the real parent of job control events regardless of ptrace With recent changes, job control and ptrace stopped states are properly separated and accessible to the real parent and the ptracer respectively; however, notifications of job control stopped/continued events to the real parent while ptraced are still missing. A ptracee participates in group stop in ptrace_stop() but the completion isn't notified. If participation results in completion of group stop, notify the real parent of the event. The ptrace and group stops are separate and can be handled as such. However, when the real parent and the ptracer are in the same thread group, only the ptrace stop event is visible through wait(2) and the duplicate notifications are different from the current behavior and are confusing. Suppress group stop notification in such cases. The continued state is shared between the real parent and the ptracer but is only meaningful to the real parent. Always notify the real parent and notify the ptracer too for backward compatibility. Similar to stop notification, if the real parent is the ptracer, suppress a duplicate notification. Test case follows. #include <stdio.h> #include <unistd.h> #include <time.h> #include <errno.h> #include <sys/types.h> #include <sys/ptrace.h> #include <sys/wait.h> int main(void) { const struct timespec ts100ms = { .tv_nsec = 100000000 }; pid_t tracee, tracer; siginfo_t si; int i; tracee = fork(); if (tracee == 0) { while (1) { printf("tracee: SIGSTOP\n"); raise(SIGSTOP); nanosleep(&ts100ms, NULL); printf("tracee: SIGCONT\n"); raise(SIGCONT); nanosleep(&ts100ms, NULL); } } waitid(P_PID, tracee, &si, WSTOPPED | WNOHANG | WNOWAIT); tracer = fork(); if (tracer == 0) { nanosleep(&ts100ms, NULL); ptrace(PTRACE_ATTACH, tracee, NULL, NULL); for (i = 0; i < 11; i++) { si.si_pid = 0; waitid(P_PID, tracee, &si, WSTOPPED); if (si.si_pid && si.si_code == CLD_TRAPPED) ptrace(PTRACE_CONT, tracee, NULL, (void *)(long)si.si_status); } printf("tracer: EXITING\n"); return 0; } while (1) { si.si_pid = 0; waitid(P_PID, tracee, &si, WSTOPPED | WCONTINUED | WEXITED); if (si.si_pid) printf("mommy : WAIT status=%02d code=%02d\n", si.si_status, si.si_code); } return 0; } Before this patch, while ptraced, the real parent doesn't get notifications for job control events, so although it can access those events, the later waitid(2) call never wakes up. tracee: SIGSTOP mommy : WAIT status=19 code=05 tracee: SIGCONT tracee: SIGSTOP tracee: SIGCONT tracee: SIGSTOP tracee: SIGCONT tracee: SIGSTOP tracer: EXITING mommy : WAIT status=19 code=05 ^C After this patch, it works as expected. tracee: SIGSTOP mommy : WAIT status=19 code=05 tracee: SIGCONT mommy : WAIT status=18 code=06 tracee: SIGSTOP mommy : WAIT status=19 code=05 tracee: SIGCONT mommy : WAIT status=18 code=06 tracee: SIGSTOP mommy : WAIT status=19 code=05 tracee: SIGCONT mommy : WAIT status=18 code=06 tracee: SIGSTOP tracer: EXITING mommy : WAIT status=19 code=05 ^C -v2: Oleg pointed out that * Group stop notification to the real parent should also happen when ptracer detach races with ptrace_stop(). * real_parent_is_ptracer() should be testing thread group equality not the task itself as wait(2) and stop/cont notifications are normally thread-group wide. Both issues are fixed accordingly. -v3: real_parent_is_ptracer() updated to test child->real_parent instead of child->group_leader->real_parent per Oleg's suggestion. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com>
2011-03-23 09:37:01 +00:00
if (gstop_done)
do_notify_parent_cldstop(current, false, why);
ptrace: ensure arch_ptrace/ptrace_request can never race with SIGKILL putreg() assumes that the tracee is not running and pt_regs_access() can safely play with its stack. However a killed tracee can return from ptrace_stop() to the low-level asm code and do RESTORE_REST, this means that debugger can actually read/modify the kernel stack until the tracee does SAVE_REST again. set_task_blockstep() can race with SIGKILL too and in some sense this race is even worse, the very fact the tracee can be woken up breaks the logic. As Linus suggested we can clear TASK_WAKEKILL around the arch_ptrace() call, this ensures that nobody can ever wakeup the tracee while the debugger looks at it. Not only this fixes the mentioned problems, we can do some cleanups/simplifications in arch_ptrace() paths. Probably ptrace_unfreeze_traced() needs more callers, for example it makes sense to make the tracee killable for oom-killer before access_process_vm(). While at it, add the comment into may_ptrace_stop() to explain why ptrace_stop() still can't rely on SIGKILL and signal_pending_state(). Reported-by: Salman Qazi <sqazi@google.com> Reported-by: Suleiman Souhlal <suleiman@google.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-21 19:48:00 +00:00
/* tasklist protects us from ptrace_freeze_traced() */
ptrace_stop: fix the race with ptrace detach+attach If the tracer went away (may_ptrace_stop() failed), ptrace_stop() drops tasklist and then changes the ->state from TASK_TRACED to TASK_RUNNING. This can fool another tracer which attaches to us in between. Change the ->state under tasklist_lock to ensure that ptrace_check_attach() can't wrongly succeed. Also, remove the unnecessary mb(). Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 12:19:00 +00:00
__set_current_state(TASK_RUNNING);
ptrace_stop: fix racy nonstop_code setting If the tracer is gone and we are not going to stop, ptrace_stop() sets ->exit_code = nostop_code. However, the tracer could actually clear the exit code before detaching. In that case get_signal_to_deliver() "resends" the signal which was cancelled by the debugger. For example, it is possible that a quick PTRACE_ATTACH + PTRACE_DETACH can leave the tracee in STOPPED state. Change the behaviour of ptrace_stop(). If the caller is ptrace notify(), we should always clear ->exit_code. If the caller is get_signal_to_deliver(), we should not touch it at all. To do so, change the nonstop_code parameter to "bool clear_code" and change the callers accordingly. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 12:19:03 +00:00
if (clear_code)
current->exit_code = 0;
ptrace_stop: fix the race with ptrace detach+attach If the tracer went away (may_ptrace_stop() failed), ptrace_stop() drops tasklist and then changes the ->state from TASK_TRACED to TASK_RUNNING. This can fool another tracer which attaches to us in between. Change the ->state under tasklist_lock to ensure that ptrace_check_attach() can't wrongly succeed. Also, remove the unnecessary mb(). Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 12:19:00 +00:00
read_unlock(&tasklist_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
/*
* We are back. Now reacquire the siglock before touching
* last_siginfo, so that we are sure to have synchronized with
* any signal-sending on another CPU that wants to examine it.
*/
spin_lock_irq(&current->sighand->siglock);
current->last_siginfo = NULL;
ptrace: implement PTRACE_LISTEN The previous patch implemented async notification for ptrace but it only worked while trace is running. This patch introduces PTRACE_LISTEN which is suggested by Oleg Nestrov. It's allowed iff tracee is in STOP trap and puts tracee into quasi-running state - tracee never really runs but wait(2) and ptrace(2) consider it to be running. While ptracer is listening, tracee is allowed to re-enter STOP to notify an async event. Listening state is cleared on the first notification. Ptracer can also clear it by issuing INTERRUPT - tracee will re-trap into STOP with listening state cleared. This allows ptracer to monitor group stop state without running tracee - use INTERRUPT to put tracee into STOP trap, issue LISTEN and then wait(2) to wait for the next group stop event. When it happens, PTRACE_GETSIGINFO provides information to determine the current state. Test program follows. #define PTRACE_SEIZE 0x4206 #define PTRACE_INTERRUPT 0x4207 #define PTRACE_LISTEN 0x4208 #define PTRACE_SEIZE_DEVEL 0x80000000 static const struct timespec ts1s = { .tv_sec = 1 }; int main(int argc, char **argv) { pid_t tracee, tracer; int i; tracee = fork(); if (!tracee) while (1) pause(); tracer = fork(); if (!tracer) { siginfo_t si; ptrace(PTRACE_SEIZE, tracee, NULL, (void *)(unsigned long)PTRACE_SEIZE_DEVEL); ptrace(PTRACE_INTERRUPT, tracee, NULL, NULL); repeat: waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_GETSIGINFO, tracee, NULL, &si); if (!si.si_code) { printf("tracer: SIG %d\n", si.si_signo); ptrace(PTRACE_CONT, tracee, NULL, (void *)(unsigned long)si.si_signo); goto repeat; } printf("tracer: stopped=%d signo=%d\n", si.si_signo != SIGTRAP, si.si_signo); if (si.si_signo != SIGTRAP) ptrace(PTRACE_LISTEN, tracee, NULL, NULL); else ptrace(PTRACE_CONT, tracee, NULL, NULL); goto repeat; } for (i = 0; i < 3; i++) { nanosleep(&ts1s, NULL); printf("mother: SIGSTOP\n"); kill(tracee, SIGSTOP); nanosleep(&ts1s, NULL); printf("mother: SIGCONT\n"); kill(tracee, SIGCONT); } nanosleep(&ts1s, NULL); kill(tracer, SIGKILL); kill(tracee, SIGKILL); return 0; } This is identical to the program to test TRAP_NOTIFY except that tracee is PTRACE_LISTEN'd instead of PTRACE_CONT'd when group stopped. This allows ptracer to monitor when group stop ends without running tracee. # ./test-listen tracer: stopped=0 signo=5 mother: SIGSTOP tracer: SIG 19 tracer: stopped=1 signo=19 mother: SIGCONT tracer: stopped=0 signo=5 tracer: SIG 18 mother: SIGSTOP tracer: SIG 19 tracer: stopped=1 signo=19 mother: SIGCONT tracer: stopped=0 signo=5 tracer: SIG 18 mother: SIGSTOP tracer: SIG 19 tracer: stopped=1 signo=19 mother: SIGCONT tracer: stopped=0 signo=5 tracer: SIG 18 -v2: Moved JOBCTL_LISTENING check in wait_task_stopped() into task_stopped_code() as suggested by Oleg. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 09:20:18 +00:00
/* LISTENING can be set only during STOP traps, clear it */
current->jobctl &= ~JOBCTL_LISTENING;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* Queued signals ignored us while we were stopped for tracing.
* So check for any that we should take before resuming user mode.
Restrict clearing TIF_SIGPENDING This patch should get a few birds. It prevents sigaction calls from clearing TIF_SIGPENDING in other threads, which could leak -ERESTART*. And It fixes ptrace_stop not to clear it, which done at the syscall exit stop could leak -ERESTART*. It probably removes the harm from signalfd, at least assuming it never calls dequeue_signal on kernel threads that might have used block_all_signals. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-06 10:59:00 +00:00
* This sets TIF_SIGPENDING, but never clears it.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
Restrict clearing TIF_SIGPENDING This patch should get a few birds. It prevents sigaction calls from clearing TIF_SIGPENDING in other threads, which could leak -ERESTART*. And It fixes ptrace_stop not to clear it, which done at the syscall exit stop could leak -ERESTART*. It probably removes the harm from signalfd, at least assuming it never calls dequeue_signal on kernel threads that might have used block_all_signals. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-06 10:59:00 +00:00
recalc_sigpending_tsk(current);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
ptrace: implement PTRACE_SEIZE PTRACE_ATTACH implicitly issues SIGSTOP on attach which has side effects on tracee signal and job control states. This patch implements a new ptrace request PTRACE_SEIZE which attaches a tracee without trapping it or affecting its signal and job control states. The usage is the same with PTRACE_ATTACH but it takes PTRACE_SEIZE_* flags in @data. Currently, the only defined flag is PTRACE_SEIZE_DEVEL which is a temporary flag to enable PTRACE_SEIZE. PTRACE_SEIZE will change ptrace behaviors outside of attach itself. The changes will be implemented gradually and the DEVEL flag is to prevent programs which expect full SEIZE behavior from using it before all the behavior modifications are complete while allowing unit testing. The flag will be removed once SEIZE behaviors are completely implemented. * PTRACE_SEIZE, unlike ATTACH, doesn't force tracee to trap. After attaching tracee continues to run unless a trap condition occurs. * PTRACE_SEIZE doesn't affect signal or group stop state. * If PTRACE_SEIZE'd, group stop uses PTRACE_EVENT_STOP trap which uses exit_code of (signr | PTRACE_EVENT_STOP << 8) where signr is one of the stopping signals if group stop is in effect or SIGTRAP otherwise, and returns usual trap siginfo on PTRACE_GETSIGINFO instead of NULL. Seizing sets PT_SEIZED in ->ptrace of the tracee. This flag will be used to determine whether new SEIZE behaviors should be enabled. Test program follows. #define PTRACE_SEIZE 0x4206 #define PTRACE_SEIZE_DEVEL 0x80000000 static const struct timespec ts100ms = { .tv_nsec = 100000000 }; static const struct timespec ts1s = { .tv_sec = 1 }; static const struct timespec ts3s = { .tv_sec = 3 }; int main(int argc, char **argv) { pid_t tracee; tracee = fork(); if (tracee == 0) { nanosleep(&ts100ms, NULL); while (1) { printf("tracee: alive\n"); nanosleep(&ts1s, NULL); } } if (argc > 1) kill(tracee, SIGSTOP); nanosleep(&ts100ms, NULL); ptrace(PTRACE_SEIZE, tracee, NULL, (void *)(unsigned long)PTRACE_SEIZE_DEVEL); if (argc > 1) { waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, NULL); } nanosleep(&ts3s, NULL); printf("tracer: exiting\n"); return 0; } When the above program is called w/o argument, tracee is seized while running and remains running. When tracer exits, tracee continues to run and print out messages. # ./test-seize-simple tracee: alive tracee: alive tracee: alive tracer: exiting tracee: alive tracee: alive When called with an argument, tracee is seized from stopped state and continued, and returns to stopped state when tracer exits. # ./test-seize tracee: alive tracee: alive tracee: alive tracer: exiting # ps -el|grep test-seize 1 T 0 4720 1 0 80 0 - 941 signal ttyS0 00:00:00 test-seize -v2: SEIZE doesn't schedule TRAP_STOP and leaves tracee running as Jan suggested. -v3: PTRACE_EVENT_STOP traps now report group stop state by signr. If group stop is in effect the stop signal number is returned as part of exit_code; otherwise, SIGTRAP. This was suggested by Denys and Oleg. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 09:20:15 +00:00
static void ptrace_do_notify(int signr, int exit_code, int why)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
kernel_siginfo_t info;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
signal: Ensure generic siginfos the kernel sends have all bits initialized Call clear_siginfo to ensure stack allocated siginfos are fully initialized before being passed to the signal sending functions. This ensures that if there is the kind of confusion documented by TRAP_FIXME, FPE_FIXME, or BUS_FIXME the kernel won't send unitialized data to userspace when the kernel generates a signal with SI_USER but the copy to userspace assumes it is a different kind of signal, and different fields are initialized. This also prepares the way for turning copy_siginfo_to_user into a copy_to_user, by removing the need in many cases to perform a field by field copy simply to skip the uninitialized fields. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-05 23:27:42 +00:00
clear_siginfo(&info);
ptrace: implement PTRACE_SEIZE PTRACE_ATTACH implicitly issues SIGSTOP on attach which has side effects on tracee signal and job control states. This patch implements a new ptrace request PTRACE_SEIZE which attaches a tracee without trapping it or affecting its signal and job control states. The usage is the same with PTRACE_ATTACH but it takes PTRACE_SEIZE_* flags in @data. Currently, the only defined flag is PTRACE_SEIZE_DEVEL which is a temporary flag to enable PTRACE_SEIZE. PTRACE_SEIZE will change ptrace behaviors outside of attach itself. The changes will be implemented gradually and the DEVEL flag is to prevent programs which expect full SEIZE behavior from using it before all the behavior modifications are complete while allowing unit testing. The flag will be removed once SEIZE behaviors are completely implemented. * PTRACE_SEIZE, unlike ATTACH, doesn't force tracee to trap. After attaching tracee continues to run unless a trap condition occurs. * PTRACE_SEIZE doesn't affect signal or group stop state. * If PTRACE_SEIZE'd, group stop uses PTRACE_EVENT_STOP trap which uses exit_code of (signr | PTRACE_EVENT_STOP << 8) where signr is one of the stopping signals if group stop is in effect or SIGTRAP otherwise, and returns usual trap siginfo on PTRACE_GETSIGINFO instead of NULL. Seizing sets PT_SEIZED in ->ptrace of the tracee. This flag will be used to determine whether new SEIZE behaviors should be enabled. Test program follows. #define PTRACE_SEIZE 0x4206 #define PTRACE_SEIZE_DEVEL 0x80000000 static const struct timespec ts100ms = { .tv_nsec = 100000000 }; static const struct timespec ts1s = { .tv_sec = 1 }; static const struct timespec ts3s = { .tv_sec = 3 }; int main(int argc, char **argv) { pid_t tracee; tracee = fork(); if (tracee == 0) { nanosleep(&ts100ms, NULL); while (1) { printf("tracee: alive\n"); nanosleep(&ts1s, NULL); } } if (argc > 1) kill(tracee, SIGSTOP); nanosleep(&ts100ms, NULL); ptrace(PTRACE_SEIZE, tracee, NULL, (void *)(unsigned long)PTRACE_SEIZE_DEVEL); if (argc > 1) { waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, NULL); } nanosleep(&ts3s, NULL); printf("tracer: exiting\n"); return 0; } When the above program is called w/o argument, tracee is seized while running and remains running. When tracer exits, tracee continues to run and print out messages. # ./test-seize-simple tracee: alive tracee: alive tracee: alive tracer: exiting tracee: alive tracee: alive When called with an argument, tracee is seized from stopped state and continued, and returns to stopped state when tracer exits. # ./test-seize tracee: alive tracee: alive tracee: alive tracer: exiting # ps -el|grep test-seize 1 T 0 4720 1 0 80 0 - 941 signal ttyS0 00:00:00 test-seize -v2: SEIZE doesn't schedule TRAP_STOP and leaves tracee running as Jan suggested. -v3: PTRACE_EVENT_STOP traps now report group stop state by signr. If group stop is in effect the stop signal number is returned as part of exit_code; otherwise, SIGTRAP. This was suggested by Denys and Oleg. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 09:20:15 +00:00
info.si_signo = signr;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
info.si_code = exit_code;
pid namespaces: changes to show virtual ids to user This is the largest patch in the set. Make all (I hope) the places where the pid is shown to or get from user operate on the virtual pids. The idea is: - all in-kernel data structures must store either struct pid itself or the pid's global nr, obtained with pid_nr() call; - when seeking the task from kernel code with the stored id one should use find_task_by_pid() call that works with global pids; - when showing pid's numerical value to the user the virtual one should be used, but however when one shows task's pid outside this task's namespace the global one is to be used; - when getting the pid from userspace one need to consider this as the virtual one and use appropriate task/pid-searching functions. [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: nuther build fix] [akpm@linux-foundation.org: yet nuther build fix] [akpm@linux-foundation.org: remove unneeded casts] Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 06:40:14 +00:00
info.si_pid = task_pid_vnr(current);
userns: Store uid and gid values in struct cred with kuid_t and kgid_t types cred.h and a few trivial users of struct cred are changed. The rest of the users of struct cred are left for other patches as there are too many changes to make in one go and leave the change reviewable. If the user namespace is disabled and CONFIG_UIDGID_STRICT_TYPE_CHECKS are disabled the code will contiue to compile and behave correctly. Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-02-08 15:00:08 +00:00
info.si_uid = from_kuid_munged(current_user_ns(), current_uid());
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Let the debugger run. */
ptrace: implement PTRACE_SEIZE PTRACE_ATTACH implicitly issues SIGSTOP on attach which has side effects on tracee signal and job control states. This patch implements a new ptrace request PTRACE_SEIZE which attaches a tracee without trapping it or affecting its signal and job control states. The usage is the same with PTRACE_ATTACH but it takes PTRACE_SEIZE_* flags in @data. Currently, the only defined flag is PTRACE_SEIZE_DEVEL which is a temporary flag to enable PTRACE_SEIZE. PTRACE_SEIZE will change ptrace behaviors outside of attach itself. The changes will be implemented gradually and the DEVEL flag is to prevent programs which expect full SEIZE behavior from using it before all the behavior modifications are complete while allowing unit testing. The flag will be removed once SEIZE behaviors are completely implemented. * PTRACE_SEIZE, unlike ATTACH, doesn't force tracee to trap. After attaching tracee continues to run unless a trap condition occurs. * PTRACE_SEIZE doesn't affect signal or group stop state. * If PTRACE_SEIZE'd, group stop uses PTRACE_EVENT_STOP trap which uses exit_code of (signr | PTRACE_EVENT_STOP << 8) where signr is one of the stopping signals if group stop is in effect or SIGTRAP otherwise, and returns usual trap siginfo on PTRACE_GETSIGINFO instead of NULL. Seizing sets PT_SEIZED in ->ptrace of the tracee. This flag will be used to determine whether new SEIZE behaviors should be enabled. Test program follows. #define PTRACE_SEIZE 0x4206 #define PTRACE_SEIZE_DEVEL 0x80000000 static const struct timespec ts100ms = { .tv_nsec = 100000000 }; static const struct timespec ts1s = { .tv_sec = 1 }; static const struct timespec ts3s = { .tv_sec = 3 }; int main(int argc, char **argv) { pid_t tracee; tracee = fork(); if (tracee == 0) { nanosleep(&ts100ms, NULL); while (1) { printf("tracee: alive\n"); nanosleep(&ts1s, NULL); } } if (argc > 1) kill(tracee, SIGSTOP); nanosleep(&ts100ms, NULL); ptrace(PTRACE_SEIZE, tracee, NULL, (void *)(unsigned long)PTRACE_SEIZE_DEVEL); if (argc > 1) { waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, NULL); } nanosleep(&ts3s, NULL); printf("tracer: exiting\n"); return 0; } When the above program is called w/o argument, tracee is seized while running and remains running. When tracer exits, tracee continues to run and print out messages. # ./test-seize-simple tracee: alive tracee: alive tracee: alive tracer: exiting tracee: alive tracee: alive When called with an argument, tracee is seized from stopped state and continued, and returns to stopped state when tracer exits. # ./test-seize tracee: alive tracee: alive tracee: alive tracer: exiting # ps -el|grep test-seize 1 T 0 4720 1 0 80 0 - 941 signal ttyS0 00:00:00 test-seize -v2: SEIZE doesn't schedule TRAP_STOP and leaves tracee running as Jan suggested. -v3: PTRACE_EVENT_STOP traps now report group stop state by signr. If group stop is in effect the stop signal number is returned as part of exit_code; otherwise, SIGTRAP. This was suggested by Denys and Oleg. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 09:20:15 +00:00
ptrace_stop(exit_code, why, 1, &info);
}
void ptrace_notify(int exit_code)
{
BUG_ON((exit_code & (0x7f | ~0xffff)) != SIGTRAP);
task_work: Simplify the usage in ptrace_notify() and get_signal_to_deliver() ptrace_notify() and get_signal_to_deliver() do unnecessary things before task_work_run(): 1. smp_mb__after_clear_bit() is not needed, test_and_clear_bit() implies mb(). 2. And we do not need the barrier at all, in this case we only care about the "synchronous" works added by the task itself. 3. No need to clear TIF_NOTIFY_RESUME, and we should not assume task_works is the only user of this flag. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20120826191217.GA4238@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-08-26 19:12:17 +00:00
if (unlikely(current->task_works))
task_work_run();
ptrace: implement PTRACE_SEIZE PTRACE_ATTACH implicitly issues SIGSTOP on attach which has side effects on tracee signal and job control states. This patch implements a new ptrace request PTRACE_SEIZE which attaches a tracee without trapping it or affecting its signal and job control states. The usage is the same with PTRACE_ATTACH but it takes PTRACE_SEIZE_* flags in @data. Currently, the only defined flag is PTRACE_SEIZE_DEVEL which is a temporary flag to enable PTRACE_SEIZE. PTRACE_SEIZE will change ptrace behaviors outside of attach itself. The changes will be implemented gradually and the DEVEL flag is to prevent programs which expect full SEIZE behavior from using it before all the behavior modifications are complete while allowing unit testing. The flag will be removed once SEIZE behaviors are completely implemented. * PTRACE_SEIZE, unlike ATTACH, doesn't force tracee to trap. After attaching tracee continues to run unless a trap condition occurs. * PTRACE_SEIZE doesn't affect signal or group stop state. * If PTRACE_SEIZE'd, group stop uses PTRACE_EVENT_STOP trap which uses exit_code of (signr | PTRACE_EVENT_STOP << 8) where signr is one of the stopping signals if group stop is in effect or SIGTRAP otherwise, and returns usual trap siginfo on PTRACE_GETSIGINFO instead of NULL. Seizing sets PT_SEIZED in ->ptrace of the tracee. This flag will be used to determine whether new SEIZE behaviors should be enabled. Test program follows. #define PTRACE_SEIZE 0x4206 #define PTRACE_SEIZE_DEVEL 0x80000000 static const struct timespec ts100ms = { .tv_nsec = 100000000 }; static const struct timespec ts1s = { .tv_sec = 1 }; static const struct timespec ts3s = { .tv_sec = 3 }; int main(int argc, char **argv) { pid_t tracee; tracee = fork(); if (tracee == 0) { nanosleep(&ts100ms, NULL); while (1) { printf("tracee: alive\n"); nanosleep(&ts1s, NULL); } } if (argc > 1) kill(tracee, SIGSTOP); nanosleep(&ts100ms, NULL); ptrace(PTRACE_SEIZE, tracee, NULL, (void *)(unsigned long)PTRACE_SEIZE_DEVEL); if (argc > 1) { waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, NULL); } nanosleep(&ts3s, NULL); printf("tracer: exiting\n"); return 0; } When the above program is called w/o argument, tracee is seized while running and remains running. When tracer exits, tracee continues to run and print out messages. # ./test-seize-simple tracee: alive tracee: alive tracee: alive tracer: exiting tracee: alive tracee: alive When called with an argument, tracee is seized from stopped state and continued, and returns to stopped state when tracer exits. # ./test-seize tracee: alive tracee: alive tracee: alive tracer: exiting # ps -el|grep test-seize 1 T 0 4720 1 0 80 0 - 941 signal ttyS0 00:00:00 test-seize -v2: SEIZE doesn't schedule TRAP_STOP and leaves tracee running as Jan suggested. -v3: PTRACE_EVENT_STOP traps now report group stop state by signr. If group stop is in effect the stop signal number is returned as part of exit_code; otherwise, SIGTRAP. This was suggested by Denys and Oleg. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 09:20:15 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
spin_lock_irq(&current->sighand->siglock);
ptrace: implement PTRACE_SEIZE PTRACE_ATTACH implicitly issues SIGSTOP on attach which has side effects on tracee signal and job control states. This patch implements a new ptrace request PTRACE_SEIZE which attaches a tracee without trapping it or affecting its signal and job control states. The usage is the same with PTRACE_ATTACH but it takes PTRACE_SEIZE_* flags in @data. Currently, the only defined flag is PTRACE_SEIZE_DEVEL which is a temporary flag to enable PTRACE_SEIZE. PTRACE_SEIZE will change ptrace behaviors outside of attach itself. The changes will be implemented gradually and the DEVEL flag is to prevent programs which expect full SEIZE behavior from using it before all the behavior modifications are complete while allowing unit testing. The flag will be removed once SEIZE behaviors are completely implemented. * PTRACE_SEIZE, unlike ATTACH, doesn't force tracee to trap. After attaching tracee continues to run unless a trap condition occurs. * PTRACE_SEIZE doesn't affect signal or group stop state. * If PTRACE_SEIZE'd, group stop uses PTRACE_EVENT_STOP trap which uses exit_code of (signr | PTRACE_EVENT_STOP << 8) where signr is one of the stopping signals if group stop is in effect or SIGTRAP otherwise, and returns usual trap siginfo on PTRACE_GETSIGINFO instead of NULL. Seizing sets PT_SEIZED in ->ptrace of the tracee. This flag will be used to determine whether new SEIZE behaviors should be enabled. Test program follows. #define PTRACE_SEIZE 0x4206 #define PTRACE_SEIZE_DEVEL 0x80000000 static const struct timespec ts100ms = { .tv_nsec = 100000000 }; static const struct timespec ts1s = { .tv_sec = 1 }; static const struct timespec ts3s = { .tv_sec = 3 }; int main(int argc, char **argv) { pid_t tracee; tracee = fork(); if (tracee == 0) { nanosleep(&ts100ms, NULL); while (1) { printf("tracee: alive\n"); nanosleep(&ts1s, NULL); } } if (argc > 1) kill(tracee, SIGSTOP); nanosleep(&ts100ms, NULL); ptrace(PTRACE_SEIZE, tracee, NULL, (void *)(unsigned long)PTRACE_SEIZE_DEVEL); if (argc > 1) { waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, NULL); } nanosleep(&ts3s, NULL); printf("tracer: exiting\n"); return 0; } When the above program is called w/o argument, tracee is seized while running and remains running. When tracer exits, tracee continues to run and print out messages. # ./test-seize-simple tracee: alive tracee: alive tracee: alive tracer: exiting tracee: alive tracee: alive When called with an argument, tracee is seized from stopped state and continued, and returns to stopped state when tracer exits. # ./test-seize tracee: alive tracee: alive tracee: alive tracer: exiting # ps -el|grep test-seize 1 T 0 4720 1 0 80 0 - 941 signal ttyS0 00:00:00 test-seize -v2: SEIZE doesn't schedule TRAP_STOP and leaves tracee running as Jan suggested. -v3: PTRACE_EVENT_STOP traps now report group stop state by signr. If group stop is in effect the stop signal number is returned as part of exit_code; otherwise, SIGTRAP. This was suggested by Denys and Oleg. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 09:20:15 +00:00
ptrace_do_notify(SIGTRAP, exit_code, CLD_TRAPPED);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
spin_unlock_irq(&current->sighand->siglock);
}
job control: introduce JOBCTL_TRAP_STOP and use it for group stop trap do_signal_stop() implemented both normal group stop and trap for group stop while ptraced. This approach has been enough but scheduled changes require trap mechanism which can be used in more generic manner and using group stop trap for generic trap site simplifies both userland visible interface and implementation. This patch adds a new jobctl flag - JOBCTL_TRAP_STOP. When set, it triggers a trap site, which behaves like group stop trap, in get_signal_to_deliver() after checking for pending signals. While ptraced, do_signal_stop() doesn't stop itself. It initiates group stop if requested and schedules JOBCTL_TRAP_STOP and returns. The caller - get_signal_to_deliver() - is responsible for checking whether TRAP_STOP is pending afterwards and handling it. ptrace_attach() is updated to use JOBCTL_TRAP_STOP instead of JOBCTL_STOP_PENDING and __ptrace_unlink() to clear all pending trap bits and TRAPPING so that TRAP_STOP and future trap bits don't linger after detach. While at it, add proper function comment to do_signal_stop() and make it return bool. -v2: __ptrace_unlink() updated to clear JOBCTL_TRAP_MASK and TRAPPING instead of JOBCTL_PENDING_MASK. This avoids accidentally clearing JOBCTL_STOP_CONSUME. Spotted by Oleg. -v3: do_signal_stop() updated to return %false without dropping siglock while ptraced and TRAP_STOP check moved inside for(;;) loop after group stop participation. This avoids unnecessary relocking and also will help avoiding unnecessary traps by consuming group stop before handling pending traps. -v4: Jobctl trap handling moved into a separate function - do_jobctl_trap(). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 09:20:14 +00:00
/**
* do_signal_stop - handle group stop for SIGSTOP and other stop signals
* @signr: signr causing group stop if initiating
*
* If %JOBCTL_STOP_PENDING is not set yet, initiate group stop with @signr
* and participate in it. If already set, participate in the existing
* group stop. If participated in a group stop (and thus slept), %true is
* returned with siglock released.
*
* If ptraced, this function doesn't handle stop itself. Instead,
* %JOBCTL_TRAP_STOP is scheduled and %false is returned with siglock
* untouched. The caller must ensure that INTERRUPT trap handling takes
* places afterwards.
*
* CONTEXT:
* Must be called with @current->sighand->siglock held, which is released
* on %true return.
*
* RETURNS:
* %false if group stop is already cancelled or ptrace trap is scheduled.
* %true if participated in group stop.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
job control: introduce JOBCTL_TRAP_STOP and use it for group stop trap do_signal_stop() implemented both normal group stop and trap for group stop while ptraced. This approach has been enough but scheduled changes require trap mechanism which can be used in more generic manner and using group stop trap for generic trap site simplifies both userland visible interface and implementation. This patch adds a new jobctl flag - JOBCTL_TRAP_STOP. When set, it triggers a trap site, which behaves like group stop trap, in get_signal_to_deliver() after checking for pending signals. While ptraced, do_signal_stop() doesn't stop itself. It initiates group stop if requested and schedules JOBCTL_TRAP_STOP and returns. The caller - get_signal_to_deliver() - is responsible for checking whether TRAP_STOP is pending afterwards and handling it. ptrace_attach() is updated to use JOBCTL_TRAP_STOP instead of JOBCTL_STOP_PENDING and __ptrace_unlink() to clear all pending trap bits and TRAPPING so that TRAP_STOP and future trap bits don't linger after detach. While at it, add proper function comment to do_signal_stop() and make it return bool. -v2: __ptrace_unlink() updated to clear JOBCTL_TRAP_MASK and TRAPPING instead of JOBCTL_PENDING_MASK. This avoids accidentally clearing JOBCTL_STOP_CONSUME. Spotted by Oleg. -v3: do_signal_stop() updated to return %false without dropping siglock while ptraced and TRAP_STOP check moved inside for(;;) loop after group stop participation. This avoids unnecessary relocking and also will help avoiding unnecessary traps by consuming group stop before handling pending traps. -v4: Jobctl trap handling moved into a separate function - do_jobctl_trap(). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 09:20:14 +00:00
static bool do_signal_stop(int signr)
__releases(&current->sighand->siglock)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct signal_struct *sig = current->signal;
job control: rename signal->group_stop and flags to jobctl and update them signal->group_stop currently hosts mostly group stop related flags; however, it's gonna be used for wider purposes and the GROUP_STOP_ flag prefix becomes confusing. Rename signal->group_stop to signal->jobctl and rename all GROUP_STOP_* flags to JOBCTL_*. Bit position macros JOBCTL_*_BIT are defined and JOBCTL_* flags are defined in terms of them to allow using bitops later. While at it, reassign JOBCTL_TRAPPING to bit 22 to better accomodate future additions. This doesn't cause any functional change. -v2: JOBCTL_*_BIT macros added as suggested by Linus. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-02 09:13:59 +00:00
if (!(current->jobctl & JOBCTL_STOP_PENDING)) {
signals, sched: Change all uses of JOBCTL_* from 'int' to 'long' c56fb6564dcd ("Fix a misaligned load inside ptrace_attach()") makes jobctl an "unsigned long". It makes sense to have the masks applied to it match that type. This is currently just a cosmetic change, but it will prevent the mask from being unexpectedly truncated if we ever end up with masks with more bits. One instance of "signr" is an int, but I left this alone because the mask ensures that it will never overflow. Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Chris Metcalf <cmetcalf@ezchip.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bobby.prani@gmail.com Cc: oleg@redhat.com Cc: paulmck@linux.vnet.ibm.com Cc: richard@nod.at Cc: vdavydov@parallels.com Link: http://lkml.kernel.org/r/1430453997-32459-4-git-send-email-palmer@dabbelt.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-01 04:19:57 +00:00
unsigned long gstop = JOBCTL_STOP_PENDING | JOBCTL_STOP_CONSUME;
remove handle_group_stop() in favor of do_signal_stop() Every time we set SIGNAL_GROUP_EXIT or clear SIGNAL_STOP_DEQUEUED we also reset ->group_stop_count. This means that the SIGNAL_GROUP_EXIT check in handle_group_stop() is not needed, and do_signal_stop() should check SIGNAL_STOP_DEQUEUED only when ->group_stop_count == 0. With these changes handle_group_stop() becomes the subset of do_signal_stop(), we can kill it and use do_signal_stop() instead. Also, a preparation for the next patch. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Robin Holt <holt@sgi.com> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 06:27:24 +00:00
struct task_struct *t;
job control: rename signal->group_stop and flags to jobctl and update them signal->group_stop currently hosts mostly group stop related flags; however, it's gonna be used for wider purposes and the GROUP_STOP_ flag prefix becomes confusing. Rename signal->group_stop to signal->jobctl and rename all GROUP_STOP_* flags to JOBCTL_*. Bit position macros JOBCTL_*_BIT are defined and JOBCTL_* flags are defined in terms of them to allow using bitops later. While at it, reassign JOBCTL_TRAPPING to bit 22 to better accomodate future additions. This doesn't cause any functional change. -v2: JOBCTL_*_BIT macros added as suggested by Linus. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-02 09:13:59 +00:00
/* signr will be recorded in task->jobctl for retries */
WARN_ON_ONCE(signr & ~JOBCTL_STOP_SIGMASK);
ptrace: Clean transitions between TASK_STOPPED and TRACED Currently, if the task is STOPPED on ptrace attach, it's left alone and the state is silently changed to TRACED on the next ptrace call. The behavior breaks the assumption that arch_ptrace_stop() is called before any task is poked by ptrace and is ugly in that a task manipulates the state of another task directly. With GROUP_STOP_PENDING, the transitions between TASK_STOPPED and TRACED can be made clean. The tracer can use the flag to tell the tracee to retry stop on attach and detach. On retry, the tracee will enter the desired state in the correct way. The lower 16bits of task->group_stop is used to remember the signal number which caused the last group stop. This is used while retrying for ptrace attach as the original group_exit_code could have been consumed with wait(2) by then. As the real parent may wait(2) and consume the group_exit_code anytime, the group_exit_code needs to be saved separately so that it can be used when switching from regular sleep to ptrace_stop(). This is recorded in the lower 16bits of task->group_stop. If a task is already stopped and there's no intervening SIGCONT, a ptrace request immediately following a successful PTRACE_ATTACH should always succeed even if the tracer doesn't wait(2) for attach completion; however, with this change, the tracee might still be TASK_RUNNING trying to enter TASK_TRACED which would cause the following request to fail with -ESRCH. This intermediate state is hidden from the ptracer by setting GROUP_STOP_TRAPPING on attach and making ptrace_check_attach() wait for it to clear on its signal->wait_chldexit. Completing the transition or getting killed clears TRAPPING and wakes up the tracer. Note that the STOPPED -> RUNNING -> TRACED transition is still visible to other threads which are in the same group as the ptracer and the reverse transition is visible to all. Please read the comments for details. Oleg: * Spotted a race condition where a task may retry group stop without proper bookkeeping. Fixed by redoing bookkeeping on retry. * Spotted that the transition is visible to userland in several different ways. Most are fixed with GROUP_STOP_TRAPPING. Unhandled corner case is documented. * Pointed out not setting GROUP_STOP_SIGMASK on an already stopped task would result in more consistent behavior. * Pointed out that calling ptrace_stop() from do_signal_stop() in TASK_STOPPED can race with group stop start logic and then confuse the TRAPPING wait in ptrace_check_attach(). ptrace_stop() is now called with TASK_RUNNING. * Suggested using signal->wait_chldexit instead of bit wait. * Spotted a race condition between TRACED transition and clearing of TRAPPING. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
2011-03-23 09:37:00 +00:00
job control: rename signal->group_stop and flags to jobctl and update them signal->group_stop currently hosts mostly group stop related flags; however, it's gonna be used for wider purposes and the GROUP_STOP_ flag prefix becomes confusing. Rename signal->group_stop to signal->jobctl and rename all GROUP_STOP_* flags to JOBCTL_*. Bit position macros JOBCTL_*_BIT are defined and JOBCTL_* flags are defined in terms of them to allow using bitops later. While at it, reassign JOBCTL_TRAPPING to bit 22 to better accomodate future additions. This doesn't cause any functional change. -v2: JOBCTL_*_BIT macros added as suggested by Linus. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-02 09:13:59 +00:00
if (!likely(current->jobctl & JOBCTL_STOP_DEQUEUED) ||
signals: do_signal_stop(): use signal_group_exit() do_signal_stop() needs signal_group_exit() but checks sig->group_exit_task. This (optimization) is correct, SIGNAL_STOP_DEQUEUED and SIGNAL_GROUP_EXIT are mutually exclusive, but looks confusing. Use signal_group_exit(), this is not fastpath, the code clarity is more important. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:36 +00:00
unlikely(signal_group_exit(sig)))
job control: introduce JOBCTL_TRAP_STOP and use it for group stop trap do_signal_stop() implemented both normal group stop and trap for group stop while ptraced. This approach has been enough but scheduled changes require trap mechanism which can be used in more generic manner and using group stop trap for generic trap site simplifies both userland visible interface and implementation. This patch adds a new jobctl flag - JOBCTL_TRAP_STOP. When set, it triggers a trap site, which behaves like group stop trap, in get_signal_to_deliver() after checking for pending signals. While ptraced, do_signal_stop() doesn't stop itself. It initiates group stop if requested and schedules JOBCTL_TRAP_STOP and returns. The caller - get_signal_to_deliver() - is responsible for checking whether TRAP_STOP is pending afterwards and handling it. ptrace_attach() is updated to use JOBCTL_TRAP_STOP instead of JOBCTL_STOP_PENDING and __ptrace_unlink() to clear all pending trap bits and TRAPPING so that TRAP_STOP and future trap bits don't linger after detach. While at it, add proper function comment to do_signal_stop() and make it return bool. -v2: __ptrace_unlink() updated to clear JOBCTL_TRAP_MASK and TRAPPING instead of JOBCTL_PENDING_MASK. This avoids accidentally clearing JOBCTL_STOP_CONSUME. Spotted by Oleg. -v3: do_signal_stop() updated to return %false without dropping siglock while ptraced and TRAP_STOP check moved inside for(;;) loop after group stop participation. This avoids unnecessary relocking and also will help avoiding unnecessary traps by consuming group stop before handling pending traps. -v4: Jobctl trap handling moved into a separate function - do_jobctl_trap(). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 09:20:14 +00:00
return false;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
job control: Don't set group_stop exit_code if re-entering job control stop While ptraced, a task may be resumed while the containing process is still job control stopped. If the task receives another stop signal in this state, it will still initiate group stop, which generates group_exit_code, which the real parent would be able to see once the ptracer detaches. In this scenario, the real parent may see two consecutive CLD_STOPPED events from two stop signals without intervening SIGCONT, which normally is impossible. Test case follows. #include <stdio.h> #include <unistd.h> #include <sys/ptrace.h> #include <sys/wait.h> int main(void) { pid_t tracee; siginfo_t si; tracee = fork(); if (!tracee) while (1) pause(); kill(tracee, SIGSTOP); waitid(P_PID, tracee, &si, WSTOPPED); if (!fork()) { ptrace(PTRACE_ATTACH, tracee, NULL, NULL); waitid(P_PID, tracee, &si, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, (void *)(long)si.si_status); waitid(P_PID, tracee, &si, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, (void *)(long)si.si_status); waitid(P_PID, tracee, &si, WSTOPPED); ptrace(PTRACE_DETACH, tracee, NULL, NULL); return 0; } while (1) { si.si_pid = 0; waitid(P_PID, tracee, &si, WSTOPPED | WNOHANG); if (si.si_pid) printf("st=%02d c=%02d\n", si.si_status, si.si_code); } return 0; } Before the patch, the latter waitid() in polling mode reports the second stopped event generated by the implied SIGSTOP of PTRACE_ATTACH. st=19 c=05 ^C After the patch, the second event is not reported. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com>
2011-03-23 09:37:01 +00:00
* There is no group stop already in progress. We must
* initiate one now.
*
* While ptraced, a task may be resumed while group stop is
* still in effect and then receive a stop signal and
* initiate another group stop. This deviates from the
* usual behavior as two consecutive stop signals can't
signal: do_signal_stop: Remove the unneeded task_clear_group_stop_pending() PF_EXITING or TASK_STOPPED has already called task_participate_group_stop() and cleared its ->group_stop. No need to do task_clear_group_stop_pending() when we start the new group stop. Add a small comment to explain the !task_is_stopped() check. Note that this check is not exactly right and it can lead to unnecessary stop later if the thread is TASK_PTRACED. What we need is task_participated_in_group_stop(), this will be solved later. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2011-04-01 18:12:16 +00:00
* cause two group stops when !ptraced. That is why we
* also check !task_is_stopped(t) below.
job control: Don't set group_stop exit_code if re-entering job control stop While ptraced, a task may be resumed while the containing process is still job control stopped. If the task receives another stop signal in this state, it will still initiate group stop, which generates group_exit_code, which the real parent would be able to see once the ptracer detaches. In this scenario, the real parent may see two consecutive CLD_STOPPED events from two stop signals without intervening SIGCONT, which normally is impossible. Test case follows. #include <stdio.h> #include <unistd.h> #include <sys/ptrace.h> #include <sys/wait.h> int main(void) { pid_t tracee; siginfo_t si; tracee = fork(); if (!tracee) while (1) pause(); kill(tracee, SIGSTOP); waitid(P_PID, tracee, &si, WSTOPPED); if (!fork()) { ptrace(PTRACE_ATTACH, tracee, NULL, NULL); waitid(P_PID, tracee, &si, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, (void *)(long)si.si_status); waitid(P_PID, tracee, &si, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, (void *)(long)si.si_status); waitid(P_PID, tracee, &si, WSTOPPED); ptrace(PTRACE_DETACH, tracee, NULL, NULL); return 0; } while (1) { si.si_pid = 0; waitid(P_PID, tracee, &si, WSTOPPED | WNOHANG); if (si.si_pid) printf("st=%02d c=%02d\n", si.si_status, si.si_code); } return 0; } Before the patch, the latter waitid() in polling mode reports the second stopped event generated by the implied SIGSTOP of PTRACE_ATTACH. st=19 c=05 ^C After the patch, the second event is not reported. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com>
2011-03-23 09:37:01 +00:00
*
* The condition can be distinguished by testing whether
* SIGNAL_STOP_STOPPED is already set. Don't generate
* group_exit_code in such case.
*
* This is not necessary for SIGNAL_STOP_CONTINUED because
* an intervening stop signal is required to cause two
* continued events regardless of ptrace.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
job control: Don't set group_stop exit_code if re-entering job control stop While ptraced, a task may be resumed while the containing process is still job control stopped. If the task receives another stop signal in this state, it will still initiate group stop, which generates group_exit_code, which the real parent would be able to see once the ptracer detaches. In this scenario, the real parent may see two consecutive CLD_STOPPED events from two stop signals without intervening SIGCONT, which normally is impossible. Test case follows. #include <stdio.h> #include <unistd.h> #include <sys/ptrace.h> #include <sys/wait.h> int main(void) { pid_t tracee; siginfo_t si; tracee = fork(); if (!tracee) while (1) pause(); kill(tracee, SIGSTOP); waitid(P_PID, tracee, &si, WSTOPPED); if (!fork()) { ptrace(PTRACE_ATTACH, tracee, NULL, NULL); waitid(P_PID, tracee, &si, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, (void *)(long)si.si_status); waitid(P_PID, tracee, &si, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, (void *)(long)si.si_status); waitid(P_PID, tracee, &si, WSTOPPED); ptrace(PTRACE_DETACH, tracee, NULL, NULL); return 0; } while (1) { si.si_pid = 0; waitid(P_PID, tracee, &si, WSTOPPED | WNOHANG); if (si.si_pid) printf("st=%02d c=%02d\n", si.si_status, si.si_code); } return 0; } Before the patch, the latter waitid() in polling mode reports the second stopped event generated by the implied SIGSTOP of PTRACE_ATTACH. st=19 c=05 ^C After the patch, the second event is not reported. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com>
2011-03-23 09:37:01 +00:00
if (!(sig->flags & SIGNAL_STOP_STOPPED))
sig->group_exit_code = signr;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
job control: introduce task_set_jobctl_pending() task->jobctl currently hosts JOBCTL_STOP_PENDING and will host TRAP pending bits too. Setting pending conditions on a dying task may make the task unkillable. Currently, each setting site is responsible for checking for the condition but with to-be-added job control traps this becomes too fragile. This patch adds task_set_jobctl_pending() which should be used when setting task->jobctl bits to schedule a stop or trap. The function performs the followings to ease setting pending bits. * Sanity checks. * If fatal signal is pending or PF_EXITING is set, no bit is set. * STOP_SIGMASK is automatically cleared if new value is being set. do_signal_stop() and ptrace_attach() are updated to use task_set_jobctl_pending() instead of setting STOP_PENDING explicitly. The surrounding structures around setting are changed to fit task_set_jobctl_pending() better but there should be no userland visible behavior difference. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-02 09:14:00 +00:00
sig->group_stop_count = 0;
if (task_set_jobctl_pending(current, signr | gstop))
sig->group_stop_count++;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
kernel/signal.c: change do_signal_stop/do_sigaction to use while_each_thread() Change do_signal_stop() and do_sigaction() to avoid next_thread() and use while_each_thread() instead. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Kees Cook <keescook@chromium.org> Reviewed-by: Sameer Nanda <snanda@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-23 23:55:56 +00:00
t = current;
while_each_thread(current, t) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
[PATCH] do_signal_stop: don't take tasklist_lock do_signal_stop() does not need tasklist_lock anymore. So it does not need to do misc re-checks, and we can simplify the code. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-29 00:11:22 +00:00
* Setting state to TASK_STOPPED for a group
* stop is always done with the siglock held,
* so this check has no races.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
job control: introduce task_set_jobctl_pending() task->jobctl currently hosts JOBCTL_STOP_PENDING and will host TRAP pending bits too. Setting pending conditions on a dying task may make the task unkillable. Currently, each setting site is responsible for checking for the condition but with to-be-added job control traps this becomes too fragile. This patch adds task_set_jobctl_pending() which should be used when setting task->jobctl bits to schedule a stop or trap. The function performs the followings to ease setting pending bits. * Sanity checks. * If fatal signal is pending or PF_EXITING is set, no bit is set. * STOP_SIGMASK is automatically cleared if new value is being set. do_signal_stop() and ptrace_attach() are updated to use task_set_jobctl_pending() instead of setting STOP_PENDING explicitly. The surrounding structures around setting are changed to fit task_set_jobctl_pending() better but there should be no userland visible behavior difference. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-02 09:14:00 +00:00
if (!task_is_stopped(t) &&
task_set_jobctl_pending(t, signr | gstop)) {
signals: tracehook_notify_jctl change This changes tracehook_notify_jctl() so it's called with the siglock held, and changes its argument and return value definition. These clean-ups make it a better fit for what new tracing hooks need to check. Tracing needs the siglock here, held from the time TASK_STOPPED was set, to avoid potential SIGCONT races if it wants to allow any blocking in its tracing hooks. This also folds the finish_stop() function into its caller do_signal_stop(). The function is short, called only once and only unconditionally. It aids readability to fold it in. [oleg@redhat.com: do not call tracehook_notify_jctl() in TASK_STOPPED state] [oleg@redhat.com: introduce tracehook_finish_jctl() helper] Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 22:56:53 +00:00
sig->group_stop_count++;
ptrace: implement TRAP_NOTIFY and use it for group stop events Currently there's no way for ptracer to find out whether group stop finished other than polling with INTERRUPT - GETSIGINFO - CONT sequence. This patch implements group stop notification for ptracer using STOP traps. When group stop state of a seized tracee changes, JOBCTL_TRAP_NOTIFY is set, which schedules a STOP trap which is sticky - it isn't cleared by other traps and at least one STOP trap will happen eventually. STOP trap is synchronization point for event notification and the tracer can determine the current group stop state by looking at the signal number portion of exit code (si_status from waitid(2) or si_code from PTRACE_GETSIGINFO). Notifications are generated both on start and end of group stops but, because group stop participation always happens before STOP trap, this doesn't cause an extra trap while tracee is participating in group stop. The symmetry will be useful later. Note that this notification works iff tracee is not trapped. Currently there is no way to be notified of group stop state changes while tracee is trapped. This will be addressed by a later patch. An example program follows. #define PTRACE_SEIZE 0x4206 #define PTRACE_INTERRUPT 0x4207 #define PTRACE_SEIZE_DEVEL 0x80000000 static const struct timespec ts1s = { .tv_sec = 1 }; int main(int argc, char **argv) { pid_t tracee, tracer; int i; tracee = fork(); if (!tracee) while (1) pause(); tracer = fork(); if (!tracer) { siginfo_t si; ptrace(PTRACE_SEIZE, tracee, NULL, (void *)(unsigned long)PTRACE_SEIZE_DEVEL); ptrace(PTRACE_INTERRUPT, tracee, NULL, NULL); repeat: waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_GETSIGINFO, tracee, NULL, &si); if (!si.si_code) { printf("tracer: SIG %d\n", si.si_signo); ptrace(PTRACE_CONT, tracee, NULL, (void *)(unsigned long)si.si_signo); goto repeat; } printf("tracer: stopped=%d signo=%d\n", si.si_signo != SIGTRAP, si.si_signo); ptrace(PTRACE_CONT, tracee, NULL, NULL); goto repeat; } for (i = 0; i < 3; i++) { nanosleep(&ts1s, NULL); printf("mother: SIGSTOP\n"); kill(tracee, SIGSTOP); nanosleep(&ts1s, NULL); printf("mother: SIGCONT\n"); kill(tracee, SIGCONT); } nanosleep(&ts1s, NULL); kill(tracer, SIGKILL); kill(tracee, SIGKILL); return 0; } In the above program, tracer keeps tracee running and gets notification of each group stop state changes. # ./test-notify tracer: stopped=0 signo=5 mother: SIGSTOP tracer: SIG 19 tracer: stopped=1 signo=19 mother: SIGCONT tracer: stopped=0 signo=5 tracer: SIG 18 mother: SIGSTOP tracer: SIG 19 tracer: stopped=1 signo=19 mother: SIGCONT tracer: stopped=0 signo=5 tracer: SIG 18 mother: SIGSTOP tracer: SIG 19 tracer: stopped=1 signo=19 mother: SIGCONT tracer: stopped=0 signo=5 tracer: SIG 18 Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 09:20:17 +00:00
if (likely(!(t->ptrace & PT_SEIZED)))
signal_wake_up(t, 0);
else
ptrace_trap_notify(t);
[PATCH] do_signal_stop: don't take tasklist_lock do_signal_stop() does not need tasklist_lock anymore. So it does not need to do misc re-checks, and we can simplify the code. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-29 00:11:22 +00:00
}
ptrace: Clean transitions between TASK_STOPPED and TRACED Currently, if the task is STOPPED on ptrace attach, it's left alone and the state is silently changed to TRACED on the next ptrace call. The behavior breaks the assumption that arch_ptrace_stop() is called before any task is poked by ptrace and is ugly in that a task manipulates the state of another task directly. With GROUP_STOP_PENDING, the transitions between TASK_STOPPED and TRACED can be made clean. The tracer can use the flag to tell the tracee to retry stop on attach and detach. On retry, the tracee will enter the desired state in the correct way. The lower 16bits of task->group_stop is used to remember the signal number which caused the last group stop. This is used while retrying for ptrace attach as the original group_exit_code could have been consumed with wait(2) by then. As the real parent may wait(2) and consume the group_exit_code anytime, the group_exit_code needs to be saved separately so that it can be used when switching from regular sleep to ptrace_stop(). This is recorded in the lower 16bits of task->group_stop. If a task is already stopped and there's no intervening SIGCONT, a ptrace request immediately following a successful PTRACE_ATTACH should always succeed even if the tracer doesn't wait(2) for attach completion; however, with this change, the tracee might still be TASK_RUNNING trying to enter TASK_TRACED which would cause the following request to fail with -ESRCH. This intermediate state is hidden from the ptracer by setting GROUP_STOP_TRAPPING on attach and making ptrace_check_attach() wait for it to clear on its signal->wait_chldexit. Completing the transition or getting killed clears TRAPPING and wakes up the tracer. Note that the STOPPED -> RUNNING -> TRACED transition is still visible to other threads which are in the same group as the ptracer and the reverse transition is visible to all. Please read the comments for details. Oleg: * Spotted a race condition where a task may retry group stop without proper bookkeeping. Fixed by redoing bookkeeping on retry. * Spotted that the transition is visible to userland in several different ways. Most are fixed with GROUP_STOP_TRAPPING. Unhandled corner case is documented. * Pointed out not setting GROUP_STOP_SIGMASK on an already stopped task would result in more consistent behavior. * Pointed out that calling ptrace_stop() from do_signal_stop() in TASK_STOPPED can race with group stop start logic and then confuse the TRAPPING wait in ptrace_check_attach(). ptrace_stop() is now called with TASK_RUNNING. * Suggested using signal->wait_chldexit instead of bit wait. * Spotted a race condition between TRACED transition and clearing of TRAPPING. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
2011-03-23 09:37:00 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
job control: introduce JOBCTL_TRAP_STOP and use it for group stop trap do_signal_stop() implemented both normal group stop and trap for group stop while ptraced. This approach has been enough but scheduled changes require trap mechanism which can be used in more generic manner and using group stop trap for generic trap site simplifies both userland visible interface and implementation. This patch adds a new jobctl flag - JOBCTL_TRAP_STOP. When set, it triggers a trap site, which behaves like group stop trap, in get_signal_to_deliver() after checking for pending signals. While ptraced, do_signal_stop() doesn't stop itself. It initiates group stop if requested and schedules JOBCTL_TRAP_STOP and returns. The caller - get_signal_to_deliver() - is responsible for checking whether TRAP_STOP is pending afterwards and handling it. ptrace_attach() is updated to use JOBCTL_TRAP_STOP instead of JOBCTL_STOP_PENDING and __ptrace_unlink() to clear all pending trap bits and TRAPPING so that TRAP_STOP and future trap bits don't linger after detach. While at it, add proper function comment to do_signal_stop() and make it return bool. -v2: __ptrace_unlink() updated to clear JOBCTL_TRAP_MASK and TRAPPING instead of JOBCTL_PENDING_MASK. This avoids accidentally clearing JOBCTL_STOP_CONSUME. Spotted by Oleg. -v3: do_signal_stop() updated to return %false without dropping siglock while ptraced and TRAP_STOP check moved inside for(;;) loop after group stop participation. This avoids unnecessary relocking and also will help avoiding unnecessary traps by consuming group stop before handling pending traps. -v4: Jobctl trap handling moved into a separate function - do_jobctl_trap(). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 09:20:14 +00:00
ptrace: kill task_ptrace() task_ptrace(task) simply dereferences task->ptrace and isn't even used consistently only adding confusion. Kill it and directly access ->ptrace instead. This doesn't introduce any behavior change. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-17 14:50:34 +00:00
if (likely(!current->ptrace)) {
ptrace: Make do_signal_stop() use ptrace_stop() if the task is being ptraced A ptraced task would still stop at do_signal_stop() when it's stopping for stop signals and do_signal_stop() behaves the same whether the task is ptraced or not. However, in addition to stopping, ptrace_stop() also does ptrace specific stuff like calling architecture specific callbacks, so this behavior makes the code more fragile and difficult to understand. This patch makes do_signal_stop() test whether the task is ptraced and use ptrace_stop() if so. This renders tracehook_notify_jctl() rather pointless as the ptrace notification is now handled by ptrace_stop() regardless of the return value from the tracehook. It probably is a good idea to update it. This doesn't solve the whole problem as tasks already in stopped state would stay in the regular stop when ptrace attached. That part will be handled by the next patch. Oleg pointed out that this makes a userland-visible change. Before, SIGCONT would be able to wake up a task in group stop even if the task is ptraced if the tracer hasn't issued another ptrace command afterwards (as the next ptrace commands transitions the state into TASK_TRACED which ignores SIGCONT wakeups). With this and the next patch, SIGCONT may race with the transition into TASK_TRACED and is ignored if the tracee already entered TASK_TRACED. Another userland visible change of this and the next patch is that the ptracee's state would now be TASK_TRACED where it used to be TASK_STOPPED, which is visible via fs/proc. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
2011-03-23 09:37:00 +00:00
int notify = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ptrace: Make do_signal_stop() use ptrace_stop() if the task is being ptraced A ptraced task would still stop at do_signal_stop() when it's stopping for stop signals and do_signal_stop() behaves the same whether the task is ptraced or not. However, in addition to stopping, ptrace_stop() also does ptrace specific stuff like calling architecture specific callbacks, so this behavior makes the code more fragile and difficult to understand. This patch makes do_signal_stop() test whether the task is ptraced and use ptrace_stop() if so. This renders tracehook_notify_jctl() rather pointless as the ptrace notification is now handled by ptrace_stop() regardless of the return value from the tracehook. It probably is a good idea to update it. This doesn't solve the whole problem as tasks already in stopped state would stay in the regular stop when ptrace attached. That part will be handled by the next patch. Oleg pointed out that this makes a userland-visible change. Before, SIGCONT would be able to wake up a task in group stop even if the task is ptraced if the tracer hasn't issued another ptrace command afterwards (as the next ptrace commands transitions the state into TASK_TRACED which ignores SIGCONT wakeups). With this and the next patch, SIGCONT may race with the transition into TASK_TRACED and is ignored if the tracee already entered TASK_TRACED. Another userland visible change of this and the next patch is that the ptracee's state would now be TASK_TRACED where it used to be TASK_STOPPED, which is visible via fs/proc. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
2011-03-23 09:37:00 +00:00
/*
* If there are no other threads in the group, or if there
* is a group stop in progress and we are the last to stop,
* report to the parent.
*/
if (task_participate_group_stop(current))
notify = CLD_STOPPED;
sched/core: Introduce set_special_state() Gaurav reported a perceived problem with TASK_PARKED, which turned out to be a broken wait-loop pattern in __kthread_parkme(), but the reported issue can (and does) in fact happen for states that do not do condition based sleeps. When the 'current->state = TASK_RUNNING' store of a previous (concurrent) try_to_wake_up() collides with the setting of a 'special' sleep state, we can loose the sleep state. Normal condition based wait-loops are immune to this problem, but for sleep states that are not condition based are subject to this problem. There already is a fix for TASK_DEAD. Abstract that and also apply it to TASK_STOPPED and TASK_TRACED, both of which are also without condition based wait-loop. Reported-by: Gaurav Kohli <gkohli@codeaurora.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-30 12:51:01 +00:00
set_special_state(TASK_STOPPED);
ptrace: Make do_signal_stop() use ptrace_stop() if the task is being ptraced A ptraced task would still stop at do_signal_stop() when it's stopping for stop signals and do_signal_stop() behaves the same whether the task is ptraced or not. However, in addition to stopping, ptrace_stop() also does ptrace specific stuff like calling architecture specific callbacks, so this behavior makes the code more fragile and difficult to understand. This patch makes do_signal_stop() test whether the task is ptraced and use ptrace_stop() if so. This renders tracehook_notify_jctl() rather pointless as the ptrace notification is now handled by ptrace_stop() regardless of the return value from the tracehook. It probably is a good idea to update it. This doesn't solve the whole problem as tasks already in stopped state would stay in the regular stop when ptrace attached. That part will be handled by the next patch. Oleg pointed out that this makes a userland-visible change. Before, SIGCONT would be able to wake up a task in group stop even if the task is ptraced if the tracer hasn't issued another ptrace command afterwards (as the next ptrace commands transitions the state into TASK_TRACED which ignores SIGCONT wakeups). With this and the next patch, SIGCONT may race with the transition into TASK_TRACED and is ignored if the tracee already entered TASK_TRACED. Another userland visible change of this and the next patch is that the ptracee's state would now be TASK_TRACED where it used to be TASK_STOPPED, which is visible via fs/proc. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
2011-03-23 09:37:00 +00:00
spin_unlock_irq(&current->sighand->siglock);
job control: Job control stop notifications should always go to the real parent The stopped notifications in do_signal_stop() and exit_signals() are always for the completion of job control. The one in do_signal_stop() may be delivered to the ptracer if PTRACE_ATTACH races with notification and the one in exit_signals() if task exits while ptraced. In both cases, the notifications are meaningless and confusing to the ptracer as it never accesses the group stop state while the real parent would miss notifications for the events it is watching. Make sure these notifications always go to the real parent by calling do_notify_parent_cld_stop() with %false @for_ptrace. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com>
2011-03-23 09:37:01 +00:00
/*
* Notify the parent of the group stop completion. Because
* we're not holding either the siglock or tasklist_lock
* here, ptracer may attach inbetween; however, this is for
* group stop and should always be delivered to the real
* parent of the group leader. The new ptracer will get
* its notification when this task transitions into
* TASK_TRACED.
*/
ptrace: Make do_signal_stop() use ptrace_stop() if the task is being ptraced A ptraced task would still stop at do_signal_stop() when it's stopping for stop signals and do_signal_stop() behaves the same whether the task is ptraced or not. However, in addition to stopping, ptrace_stop() also does ptrace specific stuff like calling architecture specific callbacks, so this behavior makes the code more fragile and difficult to understand. This patch makes do_signal_stop() test whether the task is ptraced and use ptrace_stop() if so. This renders tracehook_notify_jctl() rather pointless as the ptrace notification is now handled by ptrace_stop() regardless of the return value from the tracehook. It probably is a good idea to update it. This doesn't solve the whole problem as tasks already in stopped state would stay in the regular stop when ptrace attached. That part will be handled by the next patch. Oleg pointed out that this makes a userland-visible change. Before, SIGCONT would be able to wake up a task in group stop even if the task is ptraced if the tracer hasn't issued another ptrace command afterwards (as the next ptrace commands transitions the state into TASK_TRACED which ignores SIGCONT wakeups). With this and the next patch, SIGCONT may race with the transition into TASK_TRACED and is ignored if the tracee already entered TASK_TRACED. Another userland visible change of this and the next patch is that the ptracee's state would now be TASK_TRACED where it used to be TASK_STOPPED, which is visible via fs/proc. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
2011-03-23 09:37:00 +00:00
if (notify) {
read_lock(&tasklist_lock);
job control: Job control stop notifications should always go to the real parent The stopped notifications in do_signal_stop() and exit_signals() are always for the completion of job control. The one in do_signal_stop() may be delivered to the ptracer if PTRACE_ATTACH races with notification and the one in exit_signals() if task exits while ptraced. In both cases, the notifications are meaningless and confusing to the ptracer as it never accesses the group stop state while the real parent would miss notifications for the events it is watching. Make sure these notifications always go to the real parent by calling do_notify_parent_cld_stop() with %false @for_ptrace. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com>
2011-03-23 09:37:01 +00:00
do_notify_parent_cldstop(current, false, notify);
ptrace: Make do_signal_stop() use ptrace_stop() if the task is being ptraced A ptraced task would still stop at do_signal_stop() when it's stopping for stop signals and do_signal_stop() behaves the same whether the task is ptraced or not. However, in addition to stopping, ptrace_stop() also does ptrace specific stuff like calling architecture specific callbacks, so this behavior makes the code more fragile and difficult to understand. This patch makes do_signal_stop() test whether the task is ptraced and use ptrace_stop() if so. This renders tracehook_notify_jctl() rather pointless as the ptrace notification is now handled by ptrace_stop() regardless of the return value from the tracehook. It probably is a good idea to update it. This doesn't solve the whole problem as tasks already in stopped state would stay in the regular stop when ptrace attached. That part will be handled by the next patch. Oleg pointed out that this makes a userland-visible change. Before, SIGCONT would be able to wake up a task in group stop even if the task is ptraced if the tracer hasn't issued another ptrace command afterwards (as the next ptrace commands transitions the state into TASK_TRACED which ignores SIGCONT wakeups). With this and the next patch, SIGCONT may race with the transition into TASK_TRACED and is ignored if the tracee already entered TASK_TRACED. Another userland visible change of this and the next patch is that the ptracee's state would now be TASK_TRACED where it used to be TASK_STOPPED, which is visible via fs/proc. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
2011-03-23 09:37:00 +00:00
read_unlock(&tasklist_lock);
}
/* Now we don't run again until woken by SIGCONT or SIGKILL */
cgroup: cgroup v2 freezer Cgroup v1 implements the freezer controller, which provides an ability to stop the workload in a cgroup and temporarily free up some resources (cpu, io, network bandwidth and, potentially, memory) for some other tasks. Cgroup v2 lacks this functionality. This patch implements freezer for cgroup v2. Cgroup v2 freezer tries to put tasks into a state similar to jobctl stop. This means that tasks can be killed, ptraced (using PTRACE_SEIZE*), and interrupted. It is possible to attach to a frozen task, get some information (e.g. read registers) and detach. It's also possible to migrate a frozen tasks to another cgroup. This differs cgroup v2 freezer from cgroup v1 freezer, which mostly tried to imitate the system-wide freezer. However uninterruptible sleep is fine when all tasks are going to be frozen (hibernation case), it's not the acceptable state for some subset of the system. Cgroup v2 freezer is not supporting freezing kthreads. If a non-root cgroup contains kthread, the cgroup still can be frozen, but the kthread will remain running, the cgroup will be shown as non-frozen, and the notification will not be delivered. * PTRACE_ATTACH is not working because non-fatal signal delivery is blocked in frozen state. There are some interface differences between cgroup v1 and cgroup v2 freezer too, which are required to conform the cgroup v2 interface design principles: 1) There is no separate controller, which has to be turned on: the functionality is always available and is represented by cgroup.freeze and cgroup.events cgroup control files. 2) The desired state is defined by the cgroup.freeze control file. Any hierarchical configuration is allowed. 3) The interface is asynchronous. The actual state is available using cgroup.events control file ("frozen" field). There are no dedicated transitional states. 4) It's allowed to make any changes with the cgroup hierarchy (create new cgroups, remove old cgroups, move tasks between cgroups) no matter if some cgroups are frozen. Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org> No-objection-from-me-by: Oleg Nesterov <oleg@redhat.com> Cc: kernel-team@fb.com
2019-04-19 17:03:04 +00:00
cgroup_enter_frozen();
freezer: change ptrace_stop/do_signal_stop to use freezable_schedule() try_to_freeze_tasks() and cgroup_freezer rely on scheduler locks to ensure that a task doing STOPPED/TRACED -> RUNNING transition can't escape freezing. This mostly works, but ptrace_stop() does not necessarily call schedule(), it can change task->state back to RUNNING and check freezing() without any lock/barrier in between. We could add the necessary barrier, but this patch changes ptrace_stop() and do_signal_stop() to use freezable_schedule(). This fixes the race, freezer_count() and freezer_should_skip() carefully avoid the race. And this simplifies the code, try_to_freeze_tasks/update_if_frozen no longer need to use task_is_stopped_or_traced() checks with the non trivial assumptions. We can rely on the mechanism which was specially designed to mark the sleeping task as "frozen enough". v2: As Tejun pointed out, we can also change get_signal_to_deliver() and move try_to_freeze() up before 'relock' label. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2012-10-26 17:46:06 +00:00
freezable_schedule();
job control: introduce JOBCTL_TRAP_STOP and use it for group stop trap do_signal_stop() implemented both normal group stop and trap for group stop while ptraced. This approach has been enough but scheduled changes require trap mechanism which can be used in more generic manner and using group stop trap for generic trap site simplifies both userland visible interface and implementation. This patch adds a new jobctl flag - JOBCTL_TRAP_STOP. When set, it triggers a trap site, which behaves like group stop trap, in get_signal_to_deliver() after checking for pending signals. While ptraced, do_signal_stop() doesn't stop itself. It initiates group stop if requested and schedules JOBCTL_TRAP_STOP and returns. The caller - get_signal_to_deliver() - is responsible for checking whether TRAP_STOP is pending afterwards and handling it. ptrace_attach() is updated to use JOBCTL_TRAP_STOP instead of JOBCTL_STOP_PENDING and __ptrace_unlink() to clear all pending trap bits and TRAPPING so that TRAP_STOP and future trap bits don't linger after detach. While at it, add proper function comment to do_signal_stop() and make it return bool. -v2: __ptrace_unlink() updated to clear JOBCTL_TRAP_MASK and TRAPPING instead of JOBCTL_PENDING_MASK. This avoids accidentally clearing JOBCTL_STOP_CONSUME. Spotted by Oleg. -v3: do_signal_stop() updated to return %false without dropping siglock while ptraced and TRAP_STOP check moved inside for(;;) loop after group stop participation. This avoids unnecessary relocking and also will help avoiding unnecessary traps by consuming group stop before handling pending traps. -v4: Jobctl trap handling moved into a separate function - do_jobctl_trap(). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 09:20:14 +00:00
return true;
ptrace: Clean transitions between TASK_STOPPED and TRACED Currently, if the task is STOPPED on ptrace attach, it's left alone and the state is silently changed to TRACED on the next ptrace call. The behavior breaks the assumption that arch_ptrace_stop() is called before any task is poked by ptrace and is ugly in that a task manipulates the state of another task directly. With GROUP_STOP_PENDING, the transitions between TASK_STOPPED and TRACED can be made clean. The tracer can use the flag to tell the tracee to retry stop on attach and detach. On retry, the tracee will enter the desired state in the correct way. The lower 16bits of task->group_stop is used to remember the signal number which caused the last group stop. This is used while retrying for ptrace attach as the original group_exit_code could have been consumed with wait(2) by then. As the real parent may wait(2) and consume the group_exit_code anytime, the group_exit_code needs to be saved separately so that it can be used when switching from regular sleep to ptrace_stop(). This is recorded in the lower 16bits of task->group_stop. If a task is already stopped and there's no intervening SIGCONT, a ptrace request immediately following a successful PTRACE_ATTACH should always succeed even if the tracer doesn't wait(2) for attach completion; however, with this change, the tracee might still be TASK_RUNNING trying to enter TASK_TRACED which would cause the following request to fail with -ESRCH. This intermediate state is hidden from the ptracer by setting GROUP_STOP_TRAPPING on attach and making ptrace_check_attach() wait for it to clear on its signal->wait_chldexit. Completing the transition or getting killed clears TRAPPING and wakes up the tracer. Note that the STOPPED -> RUNNING -> TRACED transition is still visible to other threads which are in the same group as the ptracer and the reverse transition is visible to all. Please read the comments for details. Oleg: * Spotted a race condition where a task may retry group stop without proper bookkeeping. Fixed by redoing bookkeeping on retry. * Spotted that the transition is visible to userland in several different ways. Most are fixed with GROUP_STOP_TRAPPING. Unhandled corner case is documented. * Pointed out not setting GROUP_STOP_SIGMASK on an already stopped task would result in more consistent behavior. * Pointed out that calling ptrace_stop() from do_signal_stop() in TASK_STOPPED can race with group stop start logic and then confuse the TRAPPING wait in ptrace_check_attach(). ptrace_stop() is now called with TASK_RUNNING. * Suggested using signal->wait_chldexit instead of bit wait. * Spotted a race condition between TRACED transition and clearing of TRAPPING. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
2011-03-23 09:37:00 +00:00
} else {
job control: introduce JOBCTL_TRAP_STOP and use it for group stop trap do_signal_stop() implemented both normal group stop and trap for group stop while ptraced. This approach has been enough but scheduled changes require trap mechanism which can be used in more generic manner and using group stop trap for generic trap site simplifies both userland visible interface and implementation. This patch adds a new jobctl flag - JOBCTL_TRAP_STOP. When set, it triggers a trap site, which behaves like group stop trap, in get_signal_to_deliver() after checking for pending signals. While ptraced, do_signal_stop() doesn't stop itself. It initiates group stop if requested and schedules JOBCTL_TRAP_STOP and returns. The caller - get_signal_to_deliver() - is responsible for checking whether TRAP_STOP is pending afterwards and handling it. ptrace_attach() is updated to use JOBCTL_TRAP_STOP instead of JOBCTL_STOP_PENDING and __ptrace_unlink() to clear all pending trap bits and TRAPPING so that TRAP_STOP and future trap bits don't linger after detach. While at it, add proper function comment to do_signal_stop() and make it return bool. -v2: __ptrace_unlink() updated to clear JOBCTL_TRAP_MASK and TRAPPING instead of JOBCTL_PENDING_MASK. This avoids accidentally clearing JOBCTL_STOP_CONSUME. Spotted by Oleg. -v3: do_signal_stop() updated to return %false without dropping siglock while ptraced and TRAP_STOP check moved inside for(;;) loop after group stop participation. This avoids unnecessary relocking and also will help avoiding unnecessary traps by consuming group stop before handling pending traps. -v4: Jobctl trap handling moved into a separate function - do_jobctl_trap(). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 09:20:14 +00:00
/*
* While ptraced, group stop is handled by STOP trap.
* Schedule it and let the caller deal with it.
*/
task_set_jobctl_pending(current, JOBCTL_TRAP_STOP);
return false;
signals: tracehook_notify_jctl change This changes tracehook_notify_jctl() so it's called with the siglock held, and changes its argument and return value definition. These clean-ups make it a better fit for what new tracing hooks need to check. Tracing needs the siglock here, held from the time TASK_STOPPED was set, to avoid potential SIGCONT races if it wants to allow any blocking in its tracing hooks. This also folds the finish_stop() function into its caller do_signal_stop(). The function is short, called only once and only unconditionally. It aids readability to fold it in. [oleg@redhat.com: do not call tracehook_notify_jctl() in TASK_STOPPED state] [oleg@redhat.com: introduce tracehook_finish_jctl() helper] Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 22:56:53 +00:00
}
job control: introduce JOBCTL_TRAP_STOP and use it for group stop trap do_signal_stop() implemented both normal group stop and trap for group stop while ptraced. This approach has been enough but scheduled changes require trap mechanism which can be used in more generic manner and using group stop trap for generic trap site simplifies both userland visible interface and implementation. This patch adds a new jobctl flag - JOBCTL_TRAP_STOP. When set, it triggers a trap site, which behaves like group stop trap, in get_signal_to_deliver() after checking for pending signals. While ptraced, do_signal_stop() doesn't stop itself. It initiates group stop if requested and schedules JOBCTL_TRAP_STOP and returns. The caller - get_signal_to_deliver() - is responsible for checking whether TRAP_STOP is pending afterwards and handling it. ptrace_attach() is updated to use JOBCTL_TRAP_STOP instead of JOBCTL_STOP_PENDING and __ptrace_unlink() to clear all pending trap bits and TRAPPING so that TRAP_STOP and future trap bits don't linger after detach. While at it, add proper function comment to do_signal_stop() and make it return bool. -v2: __ptrace_unlink() updated to clear JOBCTL_TRAP_MASK and TRAPPING instead of JOBCTL_PENDING_MASK. This avoids accidentally clearing JOBCTL_STOP_CONSUME. Spotted by Oleg. -v3: do_signal_stop() updated to return %false without dropping siglock while ptraced and TRAP_STOP check moved inside for(;;) loop after group stop participation. This avoids unnecessary relocking and also will help avoiding unnecessary traps by consuming group stop before handling pending traps. -v4: Jobctl trap handling moved into a separate function - do_jobctl_trap(). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 09:20:14 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
job control: introduce JOBCTL_TRAP_STOP and use it for group stop trap do_signal_stop() implemented both normal group stop and trap for group stop while ptraced. This approach has been enough but scheduled changes require trap mechanism which can be used in more generic manner and using group stop trap for generic trap site simplifies both userland visible interface and implementation. This patch adds a new jobctl flag - JOBCTL_TRAP_STOP. When set, it triggers a trap site, which behaves like group stop trap, in get_signal_to_deliver() after checking for pending signals. While ptraced, do_signal_stop() doesn't stop itself. It initiates group stop if requested and schedules JOBCTL_TRAP_STOP and returns. The caller - get_signal_to_deliver() - is responsible for checking whether TRAP_STOP is pending afterwards and handling it. ptrace_attach() is updated to use JOBCTL_TRAP_STOP instead of JOBCTL_STOP_PENDING and __ptrace_unlink() to clear all pending trap bits and TRAPPING so that TRAP_STOP and future trap bits don't linger after detach. While at it, add proper function comment to do_signal_stop() and make it return bool. -v2: __ptrace_unlink() updated to clear JOBCTL_TRAP_MASK and TRAPPING instead of JOBCTL_PENDING_MASK. This avoids accidentally clearing JOBCTL_STOP_CONSUME. Spotted by Oleg. -v3: do_signal_stop() updated to return %false without dropping siglock while ptraced and TRAP_STOP check moved inside for(;;) loop after group stop participation. This avoids unnecessary relocking and also will help avoiding unnecessary traps by consuming group stop before handling pending traps. -v4: Jobctl trap handling moved into a separate function - do_jobctl_trap(). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 09:20:14 +00:00
/**
* do_jobctl_trap - take care of ptrace jobctl traps
*
ptrace: implement PTRACE_SEIZE PTRACE_ATTACH implicitly issues SIGSTOP on attach which has side effects on tracee signal and job control states. This patch implements a new ptrace request PTRACE_SEIZE which attaches a tracee without trapping it or affecting its signal and job control states. The usage is the same with PTRACE_ATTACH but it takes PTRACE_SEIZE_* flags in @data. Currently, the only defined flag is PTRACE_SEIZE_DEVEL which is a temporary flag to enable PTRACE_SEIZE. PTRACE_SEIZE will change ptrace behaviors outside of attach itself. The changes will be implemented gradually and the DEVEL flag is to prevent programs which expect full SEIZE behavior from using it before all the behavior modifications are complete while allowing unit testing. The flag will be removed once SEIZE behaviors are completely implemented. * PTRACE_SEIZE, unlike ATTACH, doesn't force tracee to trap. After attaching tracee continues to run unless a trap condition occurs. * PTRACE_SEIZE doesn't affect signal or group stop state. * If PTRACE_SEIZE'd, group stop uses PTRACE_EVENT_STOP trap which uses exit_code of (signr | PTRACE_EVENT_STOP << 8) where signr is one of the stopping signals if group stop is in effect or SIGTRAP otherwise, and returns usual trap siginfo on PTRACE_GETSIGINFO instead of NULL. Seizing sets PT_SEIZED in ->ptrace of the tracee. This flag will be used to determine whether new SEIZE behaviors should be enabled. Test program follows. #define PTRACE_SEIZE 0x4206 #define PTRACE_SEIZE_DEVEL 0x80000000 static const struct timespec ts100ms = { .tv_nsec = 100000000 }; static const struct timespec ts1s = { .tv_sec = 1 }; static const struct timespec ts3s = { .tv_sec = 3 }; int main(int argc, char **argv) { pid_t tracee; tracee = fork(); if (tracee == 0) { nanosleep(&ts100ms, NULL); while (1) { printf("tracee: alive\n"); nanosleep(&ts1s, NULL); } } if (argc > 1) kill(tracee, SIGSTOP); nanosleep(&ts100ms, NULL); ptrace(PTRACE_SEIZE, tracee, NULL, (void *)(unsigned long)PTRACE_SEIZE_DEVEL); if (argc > 1) { waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, NULL); } nanosleep(&ts3s, NULL); printf("tracer: exiting\n"); return 0; } When the above program is called w/o argument, tracee is seized while running and remains running. When tracer exits, tracee continues to run and print out messages. # ./test-seize-simple tracee: alive tracee: alive tracee: alive tracer: exiting tracee: alive tracee: alive When called with an argument, tracee is seized from stopped state and continued, and returns to stopped state when tracer exits. # ./test-seize tracee: alive tracee: alive tracee: alive tracer: exiting # ps -el|grep test-seize 1 T 0 4720 1 0 80 0 - 941 signal ttyS0 00:00:00 test-seize -v2: SEIZE doesn't schedule TRAP_STOP and leaves tracee running as Jan suggested. -v3: PTRACE_EVENT_STOP traps now report group stop state by signr. If group stop is in effect the stop signal number is returned as part of exit_code; otherwise, SIGTRAP. This was suggested by Denys and Oleg. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 09:20:15 +00:00
* When PT_SEIZED, it's used for both group stop and explicit
* SEIZE/INTERRUPT traps. Both generate PTRACE_EVENT_STOP trap with
* accompanying siginfo. If stopped, lower eight bits of exit_code contain
* the stop signal; otherwise, %SIGTRAP.
*
* When !PT_SEIZED, it's used only for group stop trap with stop signal
* number as exit_code and no siginfo.
job control: introduce JOBCTL_TRAP_STOP and use it for group stop trap do_signal_stop() implemented both normal group stop and trap for group stop while ptraced. This approach has been enough but scheduled changes require trap mechanism which can be used in more generic manner and using group stop trap for generic trap site simplifies both userland visible interface and implementation. This patch adds a new jobctl flag - JOBCTL_TRAP_STOP. When set, it triggers a trap site, which behaves like group stop trap, in get_signal_to_deliver() after checking for pending signals. While ptraced, do_signal_stop() doesn't stop itself. It initiates group stop if requested and schedules JOBCTL_TRAP_STOP and returns. The caller - get_signal_to_deliver() - is responsible for checking whether TRAP_STOP is pending afterwards and handling it. ptrace_attach() is updated to use JOBCTL_TRAP_STOP instead of JOBCTL_STOP_PENDING and __ptrace_unlink() to clear all pending trap bits and TRAPPING so that TRAP_STOP and future trap bits don't linger after detach. While at it, add proper function comment to do_signal_stop() and make it return bool. -v2: __ptrace_unlink() updated to clear JOBCTL_TRAP_MASK and TRAPPING instead of JOBCTL_PENDING_MASK. This avoids accidentally clearing JOBCTL_STOP_CONSUME. Spotted by Oleg. -v3: do_signal_stop() updated to return %false without dropping siglock while ptraced and TRAP_STOP check moved inside for(;;) loop after group stop participation. This avoids unnecessary relocking and also will help avoiding unnecessary traps by consuming group stop before handling pending traps. -v4: Jobctl trap handling moved into a separate function - do_jobctl_trap(). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 09:20:14 +00:00
*
* CONTEXT:
* Must be called with @current->sighand->siglock held, which may be
* released and re-acquired before returning with intervening sleep.
*/
static void do_jobctl_trap(void)
{
ptrace: implement PTRACE_SEIZE PTRACE_ATTACH implicitly issues SIGSTOP on attach which has side effects on tracee signal and job control states. This patch implements a new ptrace request PTRACE_SEIZE which attaches a tracee without trapping it or affecting its signal and job control states. The usage is the same with PTRACE_ATTACH but it takes PTRACE_SEIZE_* flags in @data. Currently, the only defined flag is PTRACE_SEIZE_DEVEL which is a temporary flag to enable PTRACE_SEIZE. PTRACE_SEIZE will change ptrace behaviors outside of attach itself. The changes will be implemented gradually and the DEVEL flag is to prevent programs which expect full SEIZE behavior from using it before all the behavior modifications are complete while allowing unit testing. The flag will be removed once SEIZE behaviors are completely implemented. * PTRACE_SEIZE, unlike ATTACH, doesn't force tracee to trap. After attaching tracee continues to run unless a trap condition occurs. * PTRACE_SEIZE doesn't affect signal or group stop state. * If PTRACE_SEIZE'd, group stop uses PTRACE_EVENT_STOP trap which uses exit_code of (signr | PTRACE_EVENT_STOP << 8) where signr is one of the stopping signals if group stop is in effect or SIGTRAP otherwise, and returns usual trap siginfo on PTRACE_GETSIGINFO instead of NULL. Seizing sets PT_SEIZED in ->ptrace of the tracee. This flag will be used to determine whether new SEIZE behaviors should be enabled. Test program follows. #define PTRACE_SEIZE 0x4206 #define PTRACE_SEIZE_DEVEL 0x80000000 static const struct timespec ts100ms = { .tv_nsec = 100000000 }; static const struct timespec ts1s = { .tv_sec = 1 }; static const struct timespec ts3s = { .tv_sec = 3 }; int main(int argc, char **argv) { pid_t tracee; tracee = fork(); if (tracee == 0) { nanosleep(&ts100ms, NULL); while (1) { printf("tracee: alive\n"); nanosleep(&ts1s, NULL); } } if (argc > 1) kill(tracee, SIGSTOP); nanosleep(&ts100ms, NULL); ptrace(PTRACE_SEIZE, tracee, NULL, (void *)(unsigned long)PTRACE_SEIZE_DEVEL); if (argc > 1) { waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, NULL); } nanosleep(&ts3s, NULL); printf("tracer: exiting\n"); return 0; } When the above program is called w/o argument, tracee is seized while running and remains running. When tracer exits, tracee continues to run and print out messages. # ./test-seize-simple tracee: alive tracee: alive tracee: alive tracer: exiting tracee: alive tracee: alive When called with an argument, tracee is seized from stopped state and continued, and returns to stopped state when tracer exits. # ./test-seize tracee: alive tracee: alive tracee: alive tracer: exiting # ps -el|grep test-seize 1 T 0 4720 1 0 80 0 - 941 signal ttyS0 00:00:00 test-seize -v2: SEIZE doesn't schedule TRAP_STOP and leaves tracee running as Jan suggested. -v3: PTRACE_EVENT_STOP traps now report group stop state by signr. If group stop is in effect the stop signal number is returned as part of exit_code; otherwise, SIGTRAP. This was suggested by Denys and Oleg. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 09:20:15 +00:00
struct signal_struct *signal = current->signal;
job control: introduce JOBCTL_TRAP_STOP and use it for group stop trap do_signal_stop() implemented both normal group stop and trap for group stop while ptraced. This approach has been enough but scheduled changes require trap mechanism which can be used in more generic manner and using group stop trap for generic trap site simplifies both userland visible interface and implementation. This patch adds a new jobctl flag - JOBCTL_TRAP_STOP. When set, it triggers a trap site, which behaves like group stop trap, in get_signal_to_deliver() after checking for pending signals. While ptraced, do_signal_stop() doesn't stop itself. It initiates group stop if requested and schedules JOBCTL_TRAP_STOP and returns. The caller - get_signal_to_deliver() - is responsible for checking whether TRAP_STOP is pending afterwards and handling it. ptrace_attach() is updated to use JOBCTL_TRAP_STOP instead of JOBCTL_STOP_PENDING and __ptrace_unlink() to clear all pending trap bits and TRAPPING so that TRAP_STOP and future trap bits don't linger after detach. While at it, add proper function comment to do_signal_stop() and make it return bool. -v2: __ptrace_unlink() updated to clear JOBCTL_TRAP_MASK and TRAPPING instead of JOBCTL_PENDING_MASK. This avoids accidentally clearing JOBCTL_STOP_CONSUME. Spotted by Oleg. -v3: do_signal_stop() updated to return %false without dropping siglock while ptraced and TRAP_STOP check moved inside for(;;) loop after group stop participation. This avoids unnecessary relocking and also will help avoiding unnecessary traps by consuming group stop before handling pending traps. -v4: Jobctl trap handling moved into a separate function - do_jobctl_trap(). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 09:20:14 +00:00
int signr = current->jobctl & JOBCTL_STOP_SIGMASK;
signals: tracehook_notify_jctl change This changes tracehook_notify_jctl() so it's called with the siglock held, and changes its argument and return value definition. These clean-ups make it a better fit for what new tracing hooks need to check. Tracing needs the siglock here, held from the time TASK_STOPPED was set, to avoid potential SIGCONT races if it wants to allow any blocking in its tracing hooks. This also folds the finish_stop() function into its caller do_signal_stop(). The function is short, called only once and only unconditionally. It aids readability to fold it in. [oleg@redhat.com: do not call tracehook_notify_jctl() in TASK_STOPPED state] [oleg@redhat.com: introduce tracehook_finish_jctl() helper] Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 22:56:53 +00:00
ptrace: implement PTRACE_SEIZE PTRACE_ATTACH implicitly issues SIGSTOP on attach which has side effects on tracee signal and job control states. This patch implements a new ptrace request PTRACE_SEIZE which attaches a tracee without trapping it or affecting its signal and job control states. The usage is the same with PTRACE_ATTACH but it takes PTRACE_SEIZE_* flags in @data. Currently, the only defined flag is PTRACE_SEIZE_DEVEL which is a temporary flag to enable PTRACE_SEIZE. PTRACE_SEIZE will change ptrace behaviors outside of attach itself. The changes will be implemented gradually and the DEVEL flag is to prevent programs which expect full SEIZE behavior from using it before all the behavior modifications are complete while allowing unit testing. The flag will be removed once SEIZE behaviors are completely implemented. * PTRACE_SEIZE, unlike ATTACH, doesn't force tracee to trap. After attaching tracee continues to run unless a trap condition occurs. * PTRACE_SEIZE doesn't affect signal or group stop state. * If PTRACE_SEIZE'd, group stop uses PTRACE_EVENT_STOP trap which uses exit_code of (signr | PTRACE_EVENT_STOP << 8) where signr is one of the stopping signals if group stop is in effect or SIGTRAP otherwise, and returns usual trap siginfo on PTRACE_GETSIGINFO instead of NULL. Seizing sets PT_SEIZED in ->ptrace of the tracee. This flag will be used to determine whether new SEIZE behaviors should be enabled. Test program follows. #define PTRACE_SEIZE 0x4206 #define PTRACE_SEIZE_DEVEL 0x80000000 static const struct timespec ts100ms = { .tv_nsec = 100000000 }; static const struct timespec ts1s = { .tv_sec = 1 }; static const struct timespec ts3s = { .tv_sec = 3 }; int main(int argc, char **argv) { pid_t tracee; tracee = fork(); if (tracee == 0) { nanosleep(&ts100ms, NULL); while (1) { printf("tracee: alive\n"); nanosleep(&ts1s, NULL); } } if (argc > 1) kill(tracee, SIGSTOP); nanosleep(&ts100ms, NULL); ptrace(PTRACE_SEIZE, tracee, NULL, (void *)(unsigned long)PTRACE_SEIZE_DEVEL); if (argc > 1) { waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, NULL); } nanosleep(&ts3s, NULL); printf("tracer: exiting\n"); return 0; } When the above program is called w/o argument, tracee is seized while running and remains running. When tracer exits, tracee continues to run and print out messages. # ./test-seize-simple tracee: alive tracee: alive tracee: alive tracer: exiting tracee: alive tracee: alive When called with an argument, tracee is seized from stopped state and continued, and returns to stopped state when tracer exits. # ./test-seize tracee: alive tracee: alive tracee: alive tracer: exiting # ps -el|grep test-seize 1 T 0 4720 1 0 80 0 - 941 signal ttyS0 00:00:00 test-seize -v2: SEIZE doesn't schedule TRAP_STOP and leaves tracee running as Jan suggested. -v3: PTRACE_EVENT_STOP traps now report group stop state by signr. If group stop is in effect the stop signal number is returned as part of exit_code; otherwise, SIGTRAP. This was suggested by Denys and Oleg. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 09:20:15 +00:00
if (current->ptrace & PT_SEIZED) {
if (!signal->group_stop_count &&
!(signal->flags & SIGNAL_STOP_STOPPED))
signr = SIGTRAP;
WARN_ON_ONCE(!signr);
ptrace_do_notify(signr, signr | (PTRACE_EVENT_STOP << 8),
CLD_STOPPED);
} else {
WARN_ON_ONCE(!signr);
ptrace_stop(signr, CLD_STOPPED, 0, NULL);
current->exit_code = 0;
signals: tracehook_notify_jctl change This changes tracehook_notify_jctl() so it's called with the siglock held, and changes its argument and return value definition. These clean-ups make it a better fit for what new tracing hooks need to check. Tracing needs the siglock here, held from the time TASK_STOPPED was set, to avoid potential SIGCONT races if it wants to allow any blocking in its tracing hooks. This also folds the finish_stop() function into its caller do_signal_stop(). The function is short, called only once and only unconditionally. It aids readability to fold it in. [oleg@redhat.com: do not call tracehook_notify_jctl() in TASK_STOPPED state] [oleg@redhat.com: introduce tracehook_finish_jctl() helper] Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 22:56:53 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
cgroup: cgroup v2 freezer Cgroup v1 implements the freezer controller, which provides an ability to stop the workload in a cgroup and temporarily free up some resources (cpu, io, network bandwidth and, potentially, memory) for some other tasks. Cgroup v2 lacks this functionality. This patch implements freezer for cgroup v2. Cgroup v2 freezer tries to put tasks into a state similar to jobctl stop. This means that tasks can be killed, ptraced (using PTRACE_SEIZE*), and interrupted. It is possible to attach to a frozen task, get some information (e.g. read registers) and detach. It's also possible to migrate a frozen tasks to another cgroup. This differs cgroup v2 freezer from cgroup v1 freezer, which mostly tried to imitate the system-wide freezer. However uninterruptible sleep is fine when all tasks are going to be frozen (hibernation case), it's not the acceptable state for some subset of the system. Cgroup v2 freezer is not supporting freezing kthreads. If a non-root cgroup contains kthread, the cgroup still can be frozen, but the kthread will remain running, the cgroup will be shown as non-frozen, and the notification will not be delivered. * PTRACE_ATTACH is not working because non-fatal signal delivery is blocked in frozen state. There are some interface differences between cgroup v1 and cgroup v2 freezer too, which are required to conform the cgroup v2 interface design principles: 1) There is no separate controller, which has to be turned on: the functionality is always available and is represented by cgroup.freeze and cgroup.events cgroup control files. 2) The desired state is defined by the cgroup.freeze control file. Any hierarchical configuration is allowed. 3) The interface is asynchronous. The actual state is available using cgroup.events control file ("frozen" field). There are no dedicated transitional states. 4) It's allowed to make any changes with the cgroup hierarchy (create new cgroups, remove old cgroups, move tasks between cgroups) no matter if some cgroups are frozen. Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org> No-objection-from-me-by: Oleg Nesterov <oleg@redhat.com> Cc: kernel-team@fb.com
2019-04-19 17:03:04 +00:00
/**
* do_freezer_trap - handle the freezer jobctl trap
*
* Puts the task into frozen state, if only the task is not about to quit.
* In this case it drops JOBCTL_TRAP_FREEZE.
*
* CONTEXT:
* Must be called with @current->sighand->siglock held,
* which is always released before returning.
*/
static void do_freezer_trap(void)
__releases(&current->sighand->siglock)
{
/*
* If there are other trap bits pending except JOBCTL_TRAP_FREEZE,
* let's make another loop to give it a chance to be handled.
* In any case, we'll return back.
*/
if ((current->jobctl & (JOBCTL_PENDING_MASK | JOBCTL_TRAP_FREEZE)) !=
JOBCTL_TRAP_FREEZE) {
spin_unlock_irq(&current->sighand->siglock);
return;
}
/*
* Now we're sure that there is no pending fatal signal and no
* pending traps. Clear TIF_SIGPENDING to not get out of schedule()
* immediately (if there is a non-fatal signal pending), and
* put the task into sleep.
*/
__set_current_state(TASK_INTERRUPTIBLE);
clear_thread_flag(TIF_SIGPENDING);
spin_unlock_irq(&current->sighand->siglock);
cgroup_enter_frozen();
freezable_schedule();
}
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
static int ptrace_signal(int signr, kernel_siginfo_t *info)
ptrace_signal subroutine This breaks out the ptrace handling from get_signal_to_deliver into a new subroutine. The actual code there doesn't change, and it gets inlined into nearly identical compiled code. This makes the function substantially shorter and thus easier to read, and it nicely isolates the ptrace magic. Signed-off-by: Roland McGrath <roland@redhat.com> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-18 01:44:38 +00:00
{
ptrace: fix ptrace_signal() && STOP_DEQUEUED interaction Simple test-case, int main(void) { int pid, status; pid = fork(); if (!pid) { pause(); assert(0); return 0x23; } assert(ptrace(PTRACE_ATTACH, pid, 0,0) == 0); assert(wait(&status) == pid); assert(WIFSTOPPED(status) && WSTOPSIG(status) == SIGSTOP); kill(pid, SIGCONT); // <--- also clears STOP_DEQUEUD assert(ptrace(PTRACE_CONT, pid, 0,0) == 0); assert(wait(&status) == pid); assert(WIFSTOPPED(status) && WSTOPSIG(status) == SIGCONT); assert(ptrace(PTRACE_CONT, pid, 0, SIGSTOP) == 0); assert(wait(&status) == pid); assert(WIFSTOPPED(status) && WSTOPSIG(status) == SIGSTOP); kill(pid, SIGKILL); return 0; } Without the patch it hangs. After the patch SIGSTOP "injected" by the tracer is not ignored and stops the tracee. Note also that if this test-case uses, say, SIGWINCH instead of SIGCONT, everything works without the patch. This can't be right, and this is confusing. The problem is that SIGSTOP (or any other sig_kernel_stop() signal) has no effect without JOBCTL_STOP_DEQUEUED. This means it is simply ignored after PTRACE_CONT unless JOBCTL_STOP_DEQUEUED was set "by accident", say it wasn't cleared after initial SIGSTOP sent by PTRACE_ATTACH. At first glance we could change ptrace_signal() to add STOP_DEQUEUED after return from ptrace_stop(), but this is not right in case when the tracer does not change the reported SIGSTOP and SIGCONT comes in between. This is even more wrong with PT_SEIZED, SIGCONT adds JOBCTL_TRAP_NOTIFY which will be "lost" during the TRAP_STOP | TRAP_NOTIFY report. So lets add STOP_DEQUEUED _before_ we report the signal. It has no effect unless sig_kernel_stop() == T after the tracer resumes us, and in the latter case the pending STOP_DEQUEUED means no SIGCONT in between, we should stop. Note also that if SIGCONT was sent, PT_SEIZED tracee will correctly report PTRACE_EVENT_STOP/SIGTRAP and thus the tracer can notice the fact SIGSTOP was cancelled. Also, move the current->ptrace check from ptrace_signal() to its caller, get_signal_to_deliver(), this looks more natural. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-07-21 15:06:53 +00:00
/*
* We do not check sig_kernel_stop(signr) but set this marker
* unconditionally because we do not know whether debugger will
* change signr. This flag has no meaning unless we are going
* to stop after return from ptrace_stop(). In this case it will
* be checked in do_signal_stop(), we should only stop if it was
* not cleared by SIGCONT while we were sleeping. See also the
* comment in dequeue_signal().
*/
current->jobctl |= JOBCTL_STOP_DEQUEUED;
ptrace: Add @why to ptrace_stop() To prepare for cleanup of the interaction between group stop and ptrace, add @why to ptrace_stop(). Existing users are updated such that there is no behavior change. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Roland McGrath <roland@redhat.com>
2011-03-23 09:37:00 +00:00
ptrace_stop(signr, CLD_TRAPPED, 0, info);
ptrace_signal subroutine This breaks out the ptrace handling from get_signal_to_deliver into a new subroutine. The actual code there doesn't change, and it gets inlined into nearly identical compiled code. This makes the function substantially shorter and thus easier to read, and it nicely isolates the ptrace magic. Signed-off-by: Roland McGrath <roland@redhat.com> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-18 01:44:38 +00:00
/* We're back. Did the debugger cancel the sig? */
signr = current->exit_code;
if (signr == 0)
return signr;
current->exit_code = 0;
kernel/signal.c: fix typos and coding style General coding style and comment fixes; no code changes: - Use multi-line-comment coding style. - Put some function signatures completely on one line. - Hyphenate some words. - Spell Posix as POSIX. - Correct typos & spellos in some comments. - Drop trailing whitespace. - End sentences with periods. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-04 21:59:31 +00:00
/*
* Update the siginfo structure if the signal has
* changed. If the debugger wanted something
* specific in the siginfo structure then it should
* have updated *info via PTRACE_SETSIGINFO.
*/
ptrace_signal subroutine This breaks out the ptrace handling from get_signal_to_deliver into a new subroutine. The actual code there doesn't change, and it gets inlined into nearly identical compiled code. This makes the function substantially shorter and thus easier to read, and it nicely isolates the ptrace magic. Signed-off-by: Roland McGrath <roland@redhat.com> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-18 01:44:38 +00:00
if (signr != info->si_signo) {
signal: Ensure generic siginfos the kernel sends have all bits initialized Call clear_siginfo to ensure stack allocated siginfos are fully initialized before being passed to the signal sending functions. This ensures that if there is the kind of confusion documented by TRAP_FIXME, FPE_FIXME, or BUS_FIXME the kernel won't send unitialized data to userspace when the kernel generates a signal with SI_USER but the copy to userspace assumes it is a different kind of signal, and different fields are initialized. This also prepares the way for turning copy_siginfo_to_user into a copy_to_user, by removing the need in many cases to perform a field by field copy simply to skip the uninitialized fields. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-05 23:27:42 +00:00
clear_siginfo(info);
ptrace_signal subroutine This breaks out the ptrace handling from get_signal_to_deliver into a new subroutine. The actual code there doesn't change, and it gets inlined into nearly identical compiled code. This makes the function substantially shorter and thus easier to read, and it nicely isolates the ptrace magic. Signed-off-by: Roland McGrath <roland@redhat.com> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-18 01:44:38 +00:00
info->si_signo = signr;
info->si_errno = 0;
info->si_code = SI_USER;
user namespace: make signal.c respect user namespaces ipc/mqueue.c: for __SI_MESQ, convert the uid being sent to recipient's user namespace. (new, thanks Oleg) __send_signal: convert current's uid to the recipient's user namespace for any siginfo which is not SI_FROMKERNEL (patch from Oleg, thanks again :) do_notify_parent and do_notify_parent_cldstop: map task's uid to parent's user namespace ptrace_signal maps parent's uid into current's user namespace before including in signal to current. IIUC Oleg has argued that this shouldn't matter as the debugger will play with it, but it seems like not converting the value currently being set is misleading. Changelog: Sep 20: Inspired by Oleg's suggestion, define map_cred_ns() helper to simplify callers and help make clear what we are translating (which uid into which namespace). Passing the target task would make callers even easier to read, but we pass in user_ns because current_user_ns() != task_cred_xxx(current, user_ns). Sep 20: As recommended by Oleg, also put task_pid_vnr() under rcu_read_lock in ptrace_signal(). Sep 23: In send_signal(), detect when (user) signal is coming from an ancestor or unrelated user namespace. Pass that on to __send_signal, which sets si_uid to 0 or overflowuid if needed. Oct 12: Base on Oleg's fixup_uid() patch. On top of that, handle all SI_FROMKERNEL cases at callers, because we can't assume sender is current in those cases. Nov 10: (mhelsley) rename fixup_uid to more meaningful usern_fixup_signal_uid Nov 10: (akpm) make the !CONFIG_USER_NS case clearer Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> From: Serge Hallyn <serge.hallyn@canonical.com> Subject: __send_signal: pass q->info, not info, to userns_fixup_signal_uid (v2) Eric Biederman pointed out that passing info is a bug and could lead to a NULL pointer deref to boot. A collection of signal, securebits, filecaps, cap_bounds, and a few other ltp tests passed with this kernel. Changelog: Nov 18: previous patch missed a leading '&' Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> From: Dan Carpenter <dan.carpenter@oracle.com> Subject: ipc/mqueue: lock() => unlock() typo There was a double lock typo introduced in b085f4bd6b21 "user namespace: make signal.c respect user namespaces" Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Serge Hallyn <serge@hallyn.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10 23:11:37 +00:00
rcu_read_lock();
ptrace_signal subroutine This breaks out the ptrace handling from get_signal_to_deliver into a new subroutine. The actual code there doesn't change, and it gets inlined into nearly identical compiled code. This makes the function substantially shorter and thus easier to read, and it nicely isolates the ptrace magic. Signed-off-by: Roland McGrath <roland@redhat.com> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-18 01:44:38 +00:00
info->si_pid = task_pid_vnr(current->parent);
userns: signal remove unnecessary map_cred_ns map_cred_ns is a light wrapper around from_kuid with the order of the arguments reversed. Replace map_cred_ns with from_kuid and remove map_cred_ns. Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-03-13 23:04:35 +00:00
info->si_uid = from_kuid_munged(current_user_ns(),
task_uid(current->parent));
user namespace: make signal.c respect user namespaces ipc/mqueue.c: for __SI_MESQ, convert the uid being sent to recipient's user namespace. (new, thanks Oleg) __send_signal: convert current's uid to the recipient's user namespace for any siginfo which is not SI_FROMKERNEL (patch from Oleg, thanks again :) do_notify_parent and do_notify_parent_cldstop: map task's uid to parent's user namespace ptrace_signal maps parent's uid into current's user namespace before including in signal to current. IIUC Oleg has argued that this shouldn't matter as the debugger will play with it, but it seems like not converting the value currently being set is misleading. Changelog: Sep 20: Inspired by Oleg's suggestion, define map_cred_ns() helper to simplify callers and help make clear what we are translating (which uid into which namespace). Passing the target task would make callers even easier to read, but we pass in user_ns because current_user_ns() != task_cred_xxx(current, user_ns). Sep 20: As recommended by Oleg, also put task_pid_vnr() under rcu_read_lock in ptrace_signal(). Sep 23: In send_signal(), detect when (user) signal is coming from an ancestor or unrelated user namespace. Pass that on to __send_signal, which sets si_uid to 0 or overflowuid if needed. Oct 12: Base on Oleg's fixup_uid() patch. On top of that, handle all SI_FROMKERNEL cases at callers, because we can't assume sender is current in those cases. Nov 10: (mhelsley) rename fixup_uid to more meaningful usern_fixup_signal_uid Nov 10: (akpm) make the !CONFIG_USER_NS case clearer Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> From: Serge Hallyn <serge.hallyn@canonical.com> Subject: __send_signal: pass q->info, not info, to userns_fixup_signal_uid (v2) Eric Biederman pointed out that passing info is a bug and could lead to a NULL pointer deref to boot. A collection of signal, securebits, filecaps, cap_bounds, and a few other ltp tests passed with this kernel. Changelog: Nov 18: previous patch missed a leading '&' Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> From: Dan Carpenter <dan.carpenter@oracle.com> Subject: ipc/mqueue: lock() => unlock() typo There was a double lock typo introduced in b085f4bd6b21 "user namespace: make signal.c respect user namespaces" Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Serge Hallyn <serge@hallyn.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10 23:11:37 +00:00
rcu_read_unlock();
ptrace_signal subroutine This breaks out the ptrace handling from get_signal_to_deliver into a new subroutine. The actual code there doesn't change, and it gets inlined into nearly identical compiled code. This makes the function substantially shorter and thus easier to read, and it nicely isolates the ptrace magic. Signed-off-by: Roland McGrath <roland@redhat.com> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-18 01:44:38 +00:00
}
/* If the (new) signal is now blocked, requeue it. */
if (sigismember(&current->blocked, signr)) {
signal: Remove specific_send_sig_info This function is static and it only has two callers. As specific_send_sig_info is only called twice remembering what specific_send_sig_info does when reading the code is difficutl and it makes it hard to see which sending sending functions are equivalent to which others. So remove specific_send_sig_info to make the code easier to read. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-07-21 16:34:03 +00:00
send_signal(signr, info, current, PIDTYPE_PID);
ptrace_signal subroutine This breaks out the ptrace handling from get_signal_to_deliver into a new subroutine. The actual code there doesn't change, and it gets inlined into nearly identical compiled code. This makes the function substantially shorter and thus easier to read, and it nicely isolates the ptrace magic. Signed-off-by: Roland McGrath <roland@redhat.com> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-18 01:44:38 +00:00
signr = 0;
}
return signr;
}
signal: make get_signal() return bool make get_signal() already behaves like a boolean function. Let's actually declare it as such too. Link: http://lkml.kernel.org/r/20180602103653.18181-18-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Morris <james.morris@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 05:00:54 +00:00
bool get_signal(struct ksignal *ksig)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
get_signal_to_deliver: use the cached ->signal/sighand values Cache the values of current->signal/sighand. Shrinks .text a bit and makes the code more readable. Also, remove "sigset_t *mask", it is pointless because in fact we save the constant offset. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:47 +00:00
struct sighand_struct *sighand = current->sighand;
struct signal_struct *signal = current->signal;
int signr;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
task_work: Simplify the usage in ptrace_notify() and get_signal_to_deliver() ptrace_notify() and get_signal_to_deliver() do unnecessary things before task_work_run(): 1. smp_mb__after_clear_bit() is not needed, test_and_clear_bit() implies mb(). 2. And we do not need the barrier at all, in this case we only care about the "synchronous" works added by the task itself. 3. No need to clear TIF_NOTIFY_RESUME, and we should not assume task_works is the only user of this flag. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20120826191217.GA4238@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-08-26 19:12:17 +00:00
if (unlikely(current->task_works))
task_work_run();
signal: make sure we don't get stopped with pending task_work Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-15 10:10:52 +00:00
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-13 18:00:11 +00:00
if (unlikely(uprobe_deny_signal()))
signal: make get_signal() return bool make get_signal() already behaves like a boolean function. Let's actually declare it as such too. Link: http://lkml.kernel.org/r/20180602103653.18181-18-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Morris <james.morris@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 05:00:54 +00:00
return false;
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-13 18:00:11 +00:00
freezer vs stopped or traced This changes the "freezer" code used by suspend/hibernate in its treatment of tasks in TASK_STOPPED (job control stop) and TASK_TRACED (ptrace) states. As I understand it, the intent of the "freezer" is to hold all tasks from doing anything significant. For this purpose, TASK_STOPPED and TASK_TRACED are "frozen enough". It's possible the tasks might resume from ptrace calls (if the tracer were unfrozen) or from signals (including ones that could come via timer interrupts, etc). But this doesn't matter as long as they quickly block again while "freezing" is in effect. Some minor adjustments to the signal.c code make sure that try_to_freeze() very shortly follows all wakeups from both kinds of stop. This lets the freezer code safely leave stopped tasks unmolested. Changing this fixes the longstanding bug of seeing after resuming from suspend/hibernate your shell report "[1] Stopped" and the like for all your jobs stopped by ^Z et al, as if you had freshly fg'd and ^Z'd them. It also removes from the freezer the arcane special case treatment for ptrace'd tasks, which relied on intimate knowledge of ptrace internals. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-04 04:22:05 +00:00
/*
freezer: change ptrace_stop/do_signal_stop to use freezable_schedule() try_to_freeze_tasks() and cgroup_freezer rely on scheduler locks to ensure that a task doing STOPPED/TRACED -> RUNNING transition can't escape freezing. This mostly works, but ptrace_stop() does not necessarily call schedule(), it can change task->state back to RUNNING and check freezing() without any lock/barrier in between. We could add the necessary barrier, but this patch changes ptrace_stop() and do_signal_stop() to use freezable_schedule(). This fixes the race, freezer_count() and freezer_should_skip() carefully avoid the race. And this simplifies the code, try_to_freeze_tasks/update_if_frozen no longer need to use task_is_stopped_or_traced() checks with the non trivial assumptions. We can rely on the mechanism which was specially designed to mark the sleeping task as "frozen enough". v2: As Tejun pointed out, we can also change get_signal_to_deliver() and move try_to_freeze() up before 'relock' label. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2012-10-26 17:46:06 +00:00
* Do this once, we can't return to user-mode if freezing() == T.
* do_signal_stop() and ptrace_stop() do freezable_schedule() and
* thus do not need another check after return.
freezer vs stopped or traced This changes the "freezer" code used by suspend/hibernate in its treatment of tasks in TASK_STOPPED (job control stop) and TASK_TRACED (ptrace) states. As I understand it, the intent of the "freezer" is to hold all tasks from doing anything significant. For this purpose, TASK_STOPPED and TASK_TRACED are "frozen enough". It's possible the tasks might resume from ptrace calls (if the tracer were unfrozen) or from signals (including ones that could come via timer interrupts, etc). But this doesn't matter as long as they quickly block again while "freezing" is in effect. Some minor adjustments to the signal.c code make sure that try_to_freeze() very shortly follows all wakeups from both kinds of stop. This lets the freezer code safely leave stopped tasks unmolested. Changing this fixes the longstanding bug of seeing after resuming from suspend/hibernate your shell report "[1] Stopped" and the like for all your jobs stopped by ^Z et al, as if you had freshly fg'd and ^Z'd them. It also removes from the freezer the arcane special case treatment for ptrace'd tasks, which relied on intimate knowledge of ptrace internals. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-04 04:22:05 +00:00
*/
[PATCH] swsusp: finally solve mysqld problem This patch from Pavel moves userland freeze signals handling into more logical place. It now hits even with mysqld running. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 11:00:05 +00:00
try_to_freeze();
freezer: change ptrace_stop/do_signal_stop to use freezable_schedule() try_to_freeze_tasks() and cgroup_freezer rely on scheduler locks to ensure that a task doing STOPPED/TRACED -> RUNNING transition can't escape freezing. This mostly works, but ptrace_stop() does not necessarily call schedule(), it can change task->state back to RUNNING and check freezing() without any lock/barrier in between. We could add the necessary barrier, but this patch changes ptrace_stop() and do_signal_stop() to use freezable_schedule(). This fixes the race, freezer_count() and freezer_should_skip() carefully avoid the race. And this simplifies the code, try_to_freeze_tasks/update_if_frozen no longer need to use task_is_stopped_or_traced() checks with the non trivial assumptions. We can rely on the mechanism which was specially designed to mark the sleeping task as "frozen enough". v2: As Tejun pointed out, we can also change get_signal_to_deliver() and move try_to_freeze() up before 'relock' label. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2012-10-26 17:46:06 +00:00
relock:
get_signal_to_deliver: use the cached ->signal/sighand values Cache the values of current->signal/sighand. Shrinks .text a bit and makes the code more readable. Also, remove "sigset_t *mask", it is pointless because in fact we save the constant offset. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:47 +00:00
spin_lock_irq(&sighand->siglock);
signals: document CLD_CONTINUED notification mechanics A couple of small comments about how CLD_CONTINUED notification works. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:53:00 +00:00
/*
* Every stopped thread goes here after wakeup. Check to see if
* we should notify the parent, prepare_signal(SIGCONT) encodes
* the CLD_ si_code into SIGNAL_CLD_MASK bits.
*/
get_signal_to_deliver: use the cached ->signal/sighand values Cache the values of current->signal/sighand. Shrinks .text a bit and makes the code more readable. Also, remove "sigset_t *mask", it is pointless because in fact we save the constant offset. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:47 +00:00
if (unlikely(signal->flags & SIGNAL_CLD_MASK)) {
signal: Fix SIGCONT notification code After a task receives SIGCONT, its parent is notified via SIGCHLD with its siginfo describing what the notified event is. If SIGCONT is received while the child process is stopped, the code should be CLD_CONTINUED. If SIGCONT is recieved while the child process is in the process of being stopped, it should be CLD_STOPPED. Which code to use is determined in prepare_signal() and recorded in signal->flags using SIGNAL_CLD_CONTINUED|STOP flags. get_signal_deliver() should test these flags and then notify accoringly; however, it incorrectly tested SIGNAL_STOP_CONTINUED instead of SIGNAL_CLD_CONTINUED, thus incorrectly notifying CLD_CONTINUED if the signal is delivered before the task is wait(2)ed and CLD_STOPPED if the state was fetched already. Fix it by testing SIGNAL_CLD_CONTINUED. While at it, uncompress the ?: test into if/else clause for better readability. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Roland McGrath <roland@redhat.com>
2011-03-23 09:36:59 +00:00
int why;
if (signal->flags & SIGNAL_CLD_CONTINUED)
why = CLD_CONTINUED;
else
why = CLD_STOPPED;
get_signal_to_deliver: use the cached ->signal/sighand values Cache the values of current->signal/sighand. Shrinks .text a bit and makes the code more readable. Also, remove "sigset_t *mask", it is pointless because in fact we save the constant offset. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:47 +00:00
signal->flags &= ~SIGNAL_CLD_MASK;
signals: re-assign CLD_CONTINUED notification from the sender to reciever Based on discussion with Jiri and Roland. In short: currently handle_stop_signal(SIGCONT, p) sends the notification to p->parent, with this patch p itself notifies its parent when it becomes running. handle_stop_signal(SIGCONT) has to drop ->siglock temporary in order to notify the parent with do_notify_parent_cldstop(). This leads to multiple problems: - as Jiri Kosina pointed out, the stopped task can resume without actually seeing SIGCONT which may have a handler. - we race with another sig_kernel_stop() signal which may come in that window. - we race with sig_fatal() signals which may set SIGNAL_GROUP_EXIT in that window. - we can't avoid taking tasklist_lock() while sending SIGCONT. With this patch handle_stop_signal() just sets the new SIGNAL_CLD_CONTINUED flag in p->signal->flags and returns. The notification is sent by the first task which returns from finish_stop() (there should be at least one) or any other signalled thread from get_signal_to_deliver(). This is a user-visible change. Say, currently kill(SIGCONT, stopped_child) can't return without seeing SIGCHLD, with this patch SIGCHLD can be delayed unpredictably. Another difference is that if the child is ptraced by another process, CLD_CONTINUED may be delivered to ->real_parent after ptrace_detach() while currently it always goes to the tracer which doesn't actually need this notification. Hopefully not a problem. The patch asks for the futher obvious cleanups, I'll send them separately. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:44 +00:00
signals: tracehook_notify_jctl change This changes tracehook_notify_jctl() so it's called with the siglock held, and changes its argument and return value definition. These clean-ups make it a better fit for what new tracing hooks need to check. Tracing needs the siglock here, held from the time TASK_STOPPED was set, to avoid potential SIGCONT races if it wants to allow any blocking in its tracing hooks. This also folds the finish_stop() function into its caller do_signal_stop(). The function is short, called only once and only unconditionally. It aids readability to fold it in. [oleg@redhat.com: do not call tracehook_notify_jctl() in TASK_STOPPED state] [oleg@redhat.com: introduce tracehook_finish_jctl() helper] Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 22:56:53 +00:00
spin_unlock_irq(&sighand->siglock);
tracehook: job control This defines the tracehook_notify_jctl() hook to formalize the ptrace effects on the job control notifications. There is no change, only cleanup. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Reviewed-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 02:45:54 +00:00
job control: Notify the real parent of job control events regardless of ptrace With recent changes, job control and ptrace stopped states are properly separated and accessible to the real parent and the ptracer respectively; however, notifications of job control stopped/continued events to the real parent while ptraced are still missing. A ptracee participates in group stop in ptrace_stop() but the completion isn't notified. If participation results in completion of group stop, notify the real parent of the event. The ptrace and group stops are separate and can be handled as such. However, when the real parent and the ptracer are in the same thread group, only the ptrace stop event is visible through wait(2) and the duplicate notifications are different from the current behavior and are confusing. Suppress group stop notification in such cases. The continued state is shared between the real parent and the ptracer but is only meaningful to the real parent. Always notify the real parent and notify the ptracer too for backward compatibility. Similar to stop notification, if the real parent is the ptracer, suppress a duplicate notification. Test case follows. #include <stdio.h> #include <unistd.h> #include <time.h> #include <errno.h> #include <sys/types.h> #include <sys/ptrace.h> #include <sys/wait.h> int main(void) { const struct timespec ts100ms = { .tv_nsec = 100000000 }; pid_t tracee, tracer; siginfo_t si; int i; tracee = fork(); if (tracee == 0) { while (1) { printf("tracee: SIGSTOP\n"); raise(SIGSTOP); nanosleep(&ts100ms, NULL); printf("tracee: SIGCONT\n"); raise(SIGCONT); nanosleep(&ts100ms, NULL); } } waitid(P_PID, tracee, &si, WSTOPPED | WNOHANG | WNOWAIT); tracer = fork(); if (tracer == 0) { nanosleep(&ts100ms, NULL); ptrace(PTRACE_ATTACH, tracee, NULL, NULL); for (i = 0; i < 11; i++) { si.si_pid = 0; waitid(P_PID, tracee, &si, WSTOPPED); if (si.si_pid && si.si_code == CLD_TRAPPED) ptrace(PTRACE_CONT, tracee, NULL, (void *)(long)si.si_status); } printf("tracer: EXITING\n"); return 0; } while (1) { si.si_pid = 0; waitid(P_PID, tracee, &si, WSTOPPED | WCONTINUED | WEXITED); if (si.si_pid) printf("mommy : WAIT status=%02d code=%02d\n", si.si_status, si.si_code); } return 0; } Before this patch, while ptraced, the real parent doesn't get notifications for job control events, so although it can access those events, the later waitid(2) call never wakes up. tracee: SIGSTOP mommy : WAIT status=19 code=05 tracee: SIGCONT tracee: SIGSTOP tracee: SIGCONT tracee: SIGSTOP tracee: SIGCONT tracee: SIGSTOP tracer: EXITING mommy : WAIT status=19 code=05 ^C After this patch, it works as expected. tracee: SIGSTOP mommy : WAIT status=19 code=05 tracee: SIGCONT mommy : WAIT status=18 code=06 tracee: SIGSTOP mommy : WAIT status=19 code=05 tracee: SIGCONT mommy : WAIT status=18 code=06 tracee: SIGSTOP mommy : WAIT status=19 code=05 tracee: SIGCONT mommy : WAIT status=18 code=06 tracee: SIGSTOP tracer: EXITING mommy : WAIT status=19 code=05 ^C -v2: Oleg pointed out that * Group stop notification to the real parent should also happen when ptracer detach races with ptrace_stop(). * real_parent_is_ptracer() should be testing thread group equality not the task itself as wait(2) and stop/cont notifications are normally thread-group wide. Both issues are fixed accordingly. -v3: real_parent_is_ptracer() updated to test child->real_parent instead of child->group_leader->real_parent per Oleg's suggestion. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com>
2011-03-23 09:37:01 +00:00
/*
* Notify the parent that we're continuing. This event is
* always per-process and doesn't make whole lot of sense
* for ptracers, who shouldn't consume the state via
* wait(2) either, but, for backward compatibility, notify
* the ptracer of the group leader too unless it's gonna be
* a duplicate.
*/
ptrace: Kill tracehook_notify_jctl() tracehook_notify_jctl() aids in determining whether and what to report to the parent when a task is stopped or continued. The function also adds an extra requirement that siglock may be released across it, which is currently unused and quite difficult to satisfy in well-defined manner. As job control and the notifications are about to receive major overhaul, remove the tracehook and open code it. If ever necessary, let's factor it out after the overhaul. * Oleg spotted incorrect CLD_CONTINUED/STOPPED selection when ptraced. Fixed. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com>
2011-03-23 09:37:00 +00:00
read_lock(&tasklist_lock);
job control: Notify the real parent of job control events regardless of ptrace With recent changes, job control and ptrace stopped states are properly separated and accessible to the real parent and the ptracer respectively; however, notifications of job control stopped/continued events to the real parent while ptraced are still missing. A ptracee participates in group stop in ptrace_stop() but the completion isn't notified. If participation results in completion of group stop, notify the real parent of the event. The ptrace and group stops are separate and can be handled as such. However, when the real parent and the ptracer are in the same thread group, only the ptrace stop event is visible through wait(2) and the duplicate notifications are different from the current behavior and are confusing. Suppress group stop notification in such cases. The continued state is shared between the real parent and the ptracer but is only meaningful to the real parent. Always notify the real parent and notify the ptracer too for backward compatibility. Similar to stop notification, if the real parent is the ptracer, suppress a duplicate notification. Test case follows. #include <stdio.h> #include <unistd.h> #include <time.h> #include <errno.h> #include <sys/types.h> #include <sys/ptrace.h> #include <sys/wait.h> int main(void) { const struct timespec ts100ms = { .tv_nsec = 100000000 }; pid_t tracee, tracer; siginfo_t si; int i; tracee = fork(); if (tracee == 0) { while (1) { printf("tracee: SIGSTOP\n"); raise(SIGSTOP); nanosleep(&ts100ms, NULL); printf("tracee: SIGCONT\n"); raise(SIGCONT); nanosleep(&ts100ms, NULL); } } waitid(P_PID, tracee, &si, WSTOPPED | WNOHANG | WNOWAIT); tracer = fork(); if (tracer == 0) { nanosleep(&ts100ms, NULL); ptrace(PTRACE_ATTACH, tracee, NULL, NULL); for (i = 0; i < 11; i++) { si.si_pid = 0; waitid(P_PID, tracee, &si, WSTOPPED); if (si.si_pid && si.si_code == CLD_TRAPPED) ptrace(PTRACE_CONT, tracee, NULL, (void *)(long)si.si_status); } printf("tracer: EXITING\n"); return 0; } while (1) { si.si_pid = 0; waitid(P_PID, tracee, &si, WSTOPPED | WCONTINUED | WEXITED); if (si.si_pid) printf("mommy : WAIT status=%02d code=%02d\n", si.si_status, si.si_code); } return 0; } Before this patch, while ptraced, the real parent doesn't get notifications for job control events, so although it can access those events, the later waitid(2) call never wakes up. tracee: SIGSTOP mommy : WAIT status=19 code=05 tracee: SIGCONT tracee: SIGSTOP tracee: SIGCONT tracee: SIGSTOP tracee: SIGCONT tracee: SIGSTOP tracer: EXITING mommy : WAIT status=19 code=05 ^C After this patch, it works as expected. tracee: SIGSTOP mommy : WAIT status=19 code=05 tracee: SIGCONT mommy : WAIT status=18 code=06 tracee: SIGSTOP mommy : WAIT status=19 code=05 tracee: SIGCONT mommy : WAIT status=18 code=06 tracee: SIGSTOP mommy : WAIT status=19 code=05 tracee: SIGCONT mommy : WAIT status=18 code=06 tracee: SIGSTOP tracer: EXITING mommy : WAIT status=19 code=05 ^C -v2: Oleg pointed out that * Group stop notification to the real parent should also happen when ptracer detach races with ptrace_stop(). * real_parent_is_ptracer() should be testing thread group equality not the task itself as wait(2) and stop/cont notifications are normally thread-group wide. Both issues are fixed accordingly. -v3: real_parent_is_ptracer() updated to test child->real_parent instead of child->group_leader->real_parent per Oleg's suggestion. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com>
2011-03-23 09:37:01 +00:00
do_notify_parent_cldstop(current, false, why);
ptrace: kill real_parent_is_ptracer() in in favor of ptrace_reparented() Kill real_parent_is_ptracer() and update the callers to use ptrace_reparented(), after the previous patch they do the same. Remove the unnecessary ->ptrace != 0 check in get_signal_to_deliver(), if ptrace_reparented() == T then the task must be ptraced. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-06-24 15:34:23 +00:00
if (ptrace_reparented(current->group_leader))
do_notify_parent_cldstop(current->group_leader,
true, why);
ptrace: Kill tracehook_notify_jctl() tracehook_notify_jctl() aids in determining whether and what to report to the parent when a task is stopped or continued. The function also adds an extra requirement that siglock may be released across it, which is currently unused and quite difficult to satisfy in well-defined manner. As job control and the notifications are about to receive major overhaul, remove the tracehook and open code it. If ever necessary, let's factor it out after the overhaul. * Oleg spotted incorrect CLD_CONTINUED/STOPPED selection when ptraced. Fixed. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com>
2011-03-23 09:37:00 +00:00
read_unlock(&tasklist_lock);
job control: Notify the real parent of job control events regardless of ptrace With recent changes, job control and ptrace stopped states are properly separated and accessible to the real parent and the ptracer respectively; however, notifications of job control stopped/continued events to the real parent while ptraced are still missing. A ptracee participates in group stop in ptrace_stop() but the completion isn't notified. If participation results in completion of group stop, notify the real parent of the event. The ptrace and group stops are separate and can be handled as such. However, when the real parent and the ptracer are in the same thread group, only the ptrace stop event is visible through wait(2) and the duplicate notifications are different from the current behavior and are confusing. Suppress group stop notification in such cases. The continued state is shared between the real parent and the ptracer but is only meaningful to the real parent. Always notify the real parent and notify the ptracer too for backward compatibility. Similar to stop notification, if the real parent is the ptracer, suppress a duplicate notification. Test case follows. #include <stdio.h> #include <unistd.h> #include <time.h> #include <errno.h> #include <sys/types.h> #include <sys/ptrace.h> #include <sys/wait.h> int main(void) { const struct timespec ts100ms = { .tv_nsec = 100000000 }; pid_t tracee, tracer; siginfo_t si; int i; tracee = fork(); if (tracee == 0) { while (1) { printf("tracee: SIGSTOP\n"); raise(SIGSTOP); nanosleep(&ts100ms, NULL); printf("tracee: SIGCONT\n"); raise(SIGCONT); nanosleep(&ts100ms, NULL); } } waitid(P_PID, tracee, &si, WSTOPPED | WNOHANG | WNOWAIT); tracer = fork(); if (tracer == 0) { nanosleep(&ts100ms, NULL); ptrace(PTRACE_ATTACH, tracee, NULL, NULL); for (i = 0; i < 11; i++) { si.si_pid = 0; waitid(P_PID, tracee, &si, WSTOPPED); if (si.si_pid && si.si_code == CLD_TRAPPED) ptrace(PTRACE_CONT, tracee, NULL, (void *)(long)si.si_status); } printf("tracer: EXITING\n"); return 0; } while (1) { si.si_pid = 0; waitid(P_PID, tracee, &si, WSTOPPED | WCONTINUED | WEXITED); if (si.si_pid) printf("mommy : WAIT status=%02d code=%02d\n", si.si_status, si.si_code); } return 0; } Before this patch, while ptraced, the real parent doesn't get notifications for job control events, so although it can access those events, the later waitid(2) call never wakes up. tracee: SIGSTOP mommy : WAIT status=19 code=05 tracee: SIGCONT tracee: SIGSTOP tracee: SIGCONT tracee: SIGSTOP tracee: SIGCONT tracee: SIGSTOP tracer: EXITING mommy : WAIT status=19 code=05 ^C After this patch, it works as expected. tracee: SIGSTOP mommy : WAIT status=19 code=05 tracee: SIGCONT mommy : WAIT status=18 code=06 tracee: SIGSTOP mommy : WAIT status=19 code=05 tracee: SIGCONT mommy : WAIT status=18 code=06 tracee: SIGSTOP mommy : WAIT status=19 code=05 tracee: SIGCONT mommy : WAIT status=18 code=06 tracee: SIGSTOP tracer: EXITING mommy : WAIT status=19 code=05 ^C -v2: Oleg pointed out that * Group stop notification to the real parent should also happen when ptracer detach races with ptrace_stop(). * real_parent_is_ptracer() should be testing thread group equality not the task itself as wait(2) and stop/cont notifications are normally thread-group wide. Both issues are fixed accordingly. -v3: real_parent_is_ptracer() updated to test child->real_parent instead of child->group_leader->real_parent per Oleg's suggestion. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com>
2011-03-23 09:37:01 +00:00
signals: re-assign CLD_CONTINUED notification from the sender to reciever Based on discussion with Jiri and Roland. In short: currently handle_stop_signal(SIGCONT, p) sends the notification to p->parent, with this patch p itself notifies its parent when it becomes running. handle_stop_signal(SIGCONT) has to drop ->siglock temporary in order to notify the parent with do_notify_parent_cldstop(). This leads to multiple problems: - as Jiri Kosina pointed out, the stopped task can resume without actually seeing SIGCONT which may have a handler. - we race with another sig_kernel_stop() signal which may come in that window. - we race with sig_fatal() signals which may set SIGNAL_GROUP_EXIT in that window. - we can't avoid taking tasklist_lock() while sending SIGCONT. With this patch handle_stop_signal() just sets the new SIGNAL_CLD_CONTINUED flag in p->signal->flags and returns. The notification is sent by the first task which returns from finish_stop() (there should be at least one) or any other signalled thread from get_signal_to_deliver(). This is a user-visible change. Say, currently kill(SIGCONT, stopped_child) can't return without seeing SIGCHLD, with this patch SIGCHLD can be delayed unpredictably. Another difference is that if the child is ptraced by another process, CLD_CONTINUED may be delivered to ->real_parent after ptrace_detach() while currently it always goes to the tracer which doesn't actually need this notification. Hopefully not a problem. The patch asks for the futher obvious cleanups, I'll send them separately. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:44 +00:00
goto relock;
}
signal: Always notice exiting tasks Recently syzkaller was able to create unkillablle processes by creating a timer that is delivered as a thread local signal on SIGHUP, and receiving SIGHUP SA_NODEFERER. Ultimately causing a loop failing to deliver SIGHUP but always trying. Upon examination it turns out part of the problem is actually most of the solution. Since 2.5 signal delivery has found all fatal signals, marked the signal group for death, and queued SIGKILL in every threads thread queue relying on signal->group_exit_code to preserve the information of which was the actual fatal signal. The conversion of all fatal signals to SIGKILL results in the synchronous signal heuristic in next_signal kicking in and preferring SIGHUP to SIGKILL. Which is especially problematic as all fatal signals have already been transformed into SIGKILL. Instead of dequeueing signals and depending upon SIGKILL to be the first signal dequeued, first test if the signal group has already been marked for death. This guarantees that nothing in the signal queue can prevent a process that needs to exit from exiting. Cc: stable@vger.kernel.org Tested-by: Dmitry Vyukov <dvyukov@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Ref: ebf5ebe31d2c ("[PATCH] signal-fixes-2.5.59-A4") History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-02-07 00:39:40 +00:00
/* Has this task already been marked for death? */
signal: Restore the stop PTRACE_EVENT_EXIT In the middle of do_exit() there is there is a call "ptrace_event(PTRACE_EVENT_EXIT, code);" That call places the process in TACKED_TRACED aka "(TASK_WAKEKILL | __TASK_TRACED)" and waits for for the debugger to release the task or SIGKILL to be delivered. Skipping past dequeue_signal when we know a fatal signal has already been delivered resulted in SIGKILL remaining pending and TIF_SIGPENDING remaining set. This in turn caused the scheduler to not sleep in PTACE_EVENT_EXIT as it figured a fatal signal was pending. This also caused ptrace_freeze_traced in ptrace_check_attach to fail because it left a per thread SIGKILL pending which is what fatal_signal_pending tests for. This difference in signal state caused strace to report strace: Exit of unknown pid NNNNN ignored Therefore update the signal handling state like dequeue_signal would when removing a per thread SIGKILL, by removing SIGKILL from the per thread signal mask and clearing TIF_SIGPENDING. Acked-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Ivan Delalande <colona@arista.com> Cc: stable@vger.kernel.org Fixes: 35634ffa1751 ("signal: Always notice exiting tasks") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-02-12 05:27:42 +00:00
if (signal_group_exit(signal)) {
ksig->info.si_signo = signr = SIGKILL;
sigdelset(&current->pending.signal, SIGKILL);
kernel/signal.c: trace_signal_deliver when signal_group_exit In the fixes commit, removing SIGKILL from each thread signal mask and executing "goto fatal" directly will skip the call to "trace_signal_deliver". At this point, the delivery tracking of the SIGKILL signal will be inaccurate. Therefore, we need to add trace_signal_deliver before "goto fatal" after executing sigdelset. Note: SEND_SIG_NOINFO matches the fact that SIGKILL doesn't have any info. Link: http://lkml.kernel.org/r/20190425025812.91424-1-weizhenliang@huawei.com Fixes: cf43a757fd4944 ("signal: Restore the stop PTRACE_EVENT_EXIT") Signed-off-by: Zhenliang Wei <weizhenliang@huawei.com> Reviewed-by: Christian Brauner <christian@brauner.io> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Ivan Delalande <colona@arista.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Deepa Dinamani <deepa.kernel@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-06-01 05:30:52 +00:00
trace_signal_deliver(SIGKILL, SEND_SIG_NOINFO,
&sighand->action[SIGKILL - 1]);
signal: Restore the stop PTRACE_EVENT_EXIT In the middle of do_exit() there is there is a call "ptrace_event(PTRACE_EVENT_EXIT, code);" That call places the process in TACKED_TRACED aka "(TASK_WAKEKILL | __TASK_TRACED)" and waits for for the debugger to release the task or SIGKILL to be delivered. Skipping past dequeue_signal when we know a fatal signal has already been delivered resulted in SIGKILL remaining pending and TIF_SIGPENDING remaining set. This in turn caused the scheduler to not sleep in PTACE_EVENT_EXIT as it figured a fatal signal was pending. This also caused ptrace_freeze_traced in ptrace_check_attach to fail because it left a per thread SIGKILL pending which is what fatal_signal_pending tests for. This difference in signal state caused strace to report strace: Exit of unknown pid NNNNN ignored Therefore update the signal handling state like dequeue_signal would when removing a per thread SIGKILL, by removing SIGKILL from the per thread signal mask and clearing TIF_SIGPENDING. Acked-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Ivan Delalande <colona@arista.com> Cc: stable@vger.kernel.org Fixes: 35634ffa1751 ("signal: Always notice exiting tasks") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-02-12 05:27:42 +00:00
recalc_sigpending();
signal: Always notice exiting tasks Recently syzkaller was able to create unkillablle processes by creating a timer that is delivered as a thread local signal on SIGHUP, and receiving SIGHUP SA_NODEFERER. Ultimately causing a loop failing to deliver SIGHUP but always trying. Upon examination it turns out part of the problem is actually most of the solution. Since 2.5 signal delivery has found all fatal signals, marked the signal group for death, and queued SIGKILL in every threads thread queue relying on signal->group_exit_code to preserve the information of which was the actual fatal signal. The conversion of all fatal signals to SIGKILL results in the synchronous signal heuristic in next_signal kicking in and preferring SIGHUP to SIGKILL. Which is especially problematic as all fatal signals have already been transformed into SIGKILL. Instead of dequeueing signals and depending upon SIGKILL to be the first signal dequeued, first test if the signal group has already been marked for death. This guarantees that nothing in the signal queue can prevent a process that needs to exit from exiting. Cc: stable@vger.kernel.org Tested-by: Dmitry Vyukov <dvyukov@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Ref: ebf5ebe31d2c ("[PATCH] signal-fixes-2.5.59-A4") History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-02-07 00:39:40 +00:00
goto fatal;
signal: Restore the stop PTRACE_EVENT_EXIT In the middle of do_exit() there is there is a call "ptrace_event(PTRACE_EVENT_EXIT, code);" That call places the process in TACKED_TRACED aka "(TASK_WAKEKILL | __TASK_TRACED)" and waits for for the debugger to release the task or SIGKILL to be delivered. Skipping past dequeue_signal when we know a fatal signal has already been delivered resulted in SIGKILL remaining pending and TIF_SIGPENDING remaining set. This in turn caused the scheduler to not sleep in PTACE_EVENT_EXIT as it figured a fatal signal was pending. This also caused ptrace_freeze_traced in ptrace_check_attach to fail because it left a per thread SIGKILL pending which is what fatal_signal_pending tests for. This difference in signal state caused strace to report strace: Exit of unknown pid NNNNN ignored Therefore update the signal handling state like dequeue_signal would when removing a per thread SIGKILL, by removing SIGKILL from the per thread signal mask and clearing TIF_SIGPENDING. Acked-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Ivan Delalande <colona@arista.com> Cc: stable@vger.kernel.org Fixes: 35634ffa1751 ("signal: Always notice exiting tasks") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-02-12 05:27:42 +00:00
}
signal: Always notice exiting tasks Recently syzkaller was able to create unkillablle processes by creating a timer that is delivered as a thread local signal on SIGHUP, and receiving SIGHUP SA_NODEFERER. Ultimately causing a loop failing to deliver SIGHUP but always trying. Upon examination it turns out part of the problem is actually most of the solution. Since 2.5 signal delivery has found all fatal signals, marked the signal group for death, and queued SIGKILL in every threads thread queue relying on signal->group_exit_code to preserve the information of which was the actual fatal signal. The conversion of all fatal signals to SIGKILL results in the synchronous signal heuristic in next_signal kicking in and preferring SIGHUP to SIGKILL. Which is especially problematic as all fatal signals have already been transformed into SIGKILL. Instead of dequeueing signals and depending upon SIGKILL to be the first signal dequeued, first test if the signal group has already been marked for death. This guarantees that nothing in the signal queue can prevent a process that needs to exit from exiting. Cc: stable@vger.kernel.org Tested-by: Dmitry Vyukov <dvyukov@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Ref: ebf5ebe31d2c ("[PATCH] signal-fixes-2.5.59-A4") History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-02-07 00:39:40 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
for (;;) {
struct k_sigaction *ka;
signals: check ->group_stop_count after tracehook_get_signal() Move the call to do_signal_stop() down, after tracehook call. This makes ->group_stop_count condition visible to tracers before do_signal_stop() will participate in this group-stop. Currently the patch has no effect, tracehook_get_signal() always returns 0. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 00:47:26 +00:00
signal: remove three noop tracehooks Remove the following three noop tracehooks in signals.c. * tracehook_force_sigpending() * tracehook_get_signal() * tracehook_finish_jctl() The code area is about to be updated and these hooks don't do anything other than obfuscating the logic. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-02 09:14:00 +00:00
if (unlikely(current->jobctl & JOBCTL_STOP_PENDING) &&
do_signal_stop(0))
tracehook: get_signal_to_deliver This defines the tracehook_get_signal() hook to allow tracing code to slip in before normal signal dequeuing. This lays the groundwork for new tracing features that can inject synthetic signals outside the normal queue or control the disposition of delivered signals. The calling convention lets tracehook_get_signal() decide both exactly what will happen and what signal number to report in the handler/exit. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Reviewed-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 02:45:53 +00:00
goto relock;
signals: check ->group_stop_count after tracehook_get_signal() Move the call to do_signal_stop() down, after tracehook call. This makes ->group_stop_count condition visible to tracers before do_signal_stop() will participate in this group-stop. Currently the patch has no effect, tracehook_get_signal() always returns 0. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 00:47:26 +00:00
cgroup: cgroup v2 freezer Cgroup v1 implements the freezer controller, which provides an ability to stop the workload in a cgroup and temporarily free up some resources (cpu, io, network bandwidth and, potentially, memory) for some other tasks. Cgroup v2 lacks this functionality. This patch implements freezer for cgroup v2. Cgroup v2 freezer tries to put tasks into a state similar to jobctl stop. This means that tasks can be killed, ptraced (using PTRACE_SEIZE*), and interrupted. It is possible to attach to a frozen task, get some information (e.g. read registers) and detach. It's also possible to migrate a frozen tasks to another cgroup. This differs cgroup v2 freezer from cgroup v1 freezer, which mostly tried to imitate the system-wide freezer. However uninterruptible sleep is fine when all tasks are going to be frozen (hibernation case), it's not the acceptable state for some subset of the system. Cgroup v2 freezer is not supporting freezing kthreads. If a non-root cgroup contains kthread, the cgroup still can be frozen, but the kthread will remain running, the cgroup will be shown as non-frozen, and the notification will not be delivered. * PTRACE_ATTACH is not working because non-fatal signal delivery is blocked in frozen state. There are some interface differences between cgroup v1 and cgroup v2 freezer too, which are required to conform the cgroup v2 interface design principles: 1) There is no separate controller, which has to be turned on: the functionality is always available and is represented by cgroup.freeze and cgroup.events cgroup control files. 2) The desired state is defined by the cgroup.freeze control file. Any hierarchical configuration is allowed. 3) The interface is asynchronous. The actual state is available using cgroup.events control file ("frozen" field). There are no dedicated transitional states. 4) It's allowed to make any changes with the cgroup hierarchy (create new cgroups, remove old cgroups, move tasks between cgroups) no matter if some cgroups are frozen. Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org> No-objection-from-me-by: Oleg Nesterov <oleg@redhat.com> Cc: kernel-team@fb.com
2019-04-19 17:03:04 +00:00
if (unlikely(current->jobctl &
(JOBCTL_TRAP_MASK | JOBCTL_TRAP_FREEZE))) {
if (current->jobctl & JOBCTL_TRAP_MASK) {
do_jobctl_trap();
spin_unlock_irq(&sighand->siglock);
} else if (current->jobctl & JOBCTL_TRAP_FREEZE)
do_freezer_trap();
goto relock;
}
/*
* If the task is leaving the frozen state, let's update
* cgroup counters and reset the frozen bit.
*/
if (unlikely(cgroup_task_frozen(current))) {
job control: introduce JOBCTL_TRAP_STOP and use it for group stop trap do_signal_stop() implemented both normal group stop and trap for group stop while ptraced. This approach has been enough but scheduled changes require trap mechanism which can be used in more generic manner and using group stop trap for generic trap site simplifies both userland visible interface and implementation. This patch adds a new jobctl flag - JOBCTL_TRAP_STOP. When set, it triggers a trap site, which behaves like group stop trap, in get_signal_to_deliver() after checking for pending signals. While ptraced, do_signal_stop() doesn't stop itself. It initiates group stop if requested and schedules JOBCTL_TRAP_STOP and returns. The caller - get_signal_to_deliver() - is responsible for checking whether TRAP_STOP is pending afterwards and handling it. ptrace_attach() is updated to use JOBCTL_TRAP_STOP instead of JOBCTL_STOP_PENDING and __ptrace_unlink() to clear all pending trap bits and TRAPPING so that TRAP_STOP and future trap bits don't linger after detach. While at it, add proper function comment to do_signal_stop() and make it return bool. -v2: __ptrace_unlink() updated to clear JOBCTL_TRAP_MASK and TRAPPING instead of JOBCTL_PENDING_MASK. This avoids accidentally clearing JOBCTL_STOP_CONSUME. Spotted by Oleg. -v3: do_signal_stop() updated to return %false without dropping siglock while ptraced and TRAP_STOP check moved inside for(;;) loop after group stop participation. This avoids unnecessary relocking and also will help avoiding unnecessary traps by consuming group stop before handling pending traps. -v4: Jobctl trap handling moved into a separate function - do_jobctl_trap(). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 09:20:14 +00:00
spin_unlock_irq(&sighand->siglock);
cgroup: prevent spurious transition into non-frozen state If freezing of a cgroup races with waking of a task from the frozen state (like waiting in vfork() or in do_signal_stop()), a spurious transition of the cgroup state can happen. The task enters cgroup_leave_frozen(true), the cgroup->nr_frozen_tasks counter decrements, and the cgroup is switched to the unfrozen state. To prevent it, let's reserve cgroup_leave_frozen(true) for terminating processes and use cgroup_leave_frozen(false) otherwise. To avoid busy-looping in the signal handling loop waiting for JOBCTL_TRAP_FREEZE set from the cgroup freezing path, let's do it explicitly in cgroup_leave_frozen(), if the task is going to stay frozen. Suggested-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2019-04-26 17:59:44 +00:00
cgroup_leave_frozen(false);
job control: introduce JOBCTL_TRAP_STOP and use it for group stop trap do_signal_stop() implemented both normal group stop and trap for group stop while ptraced. This approach has been enough but scheduled changes require trap mechanism which can be used in more generic manner and using group stop trap for generic trap site simplifies both userland visible interface and implementation. This patch adds a new jobctl flag - JOBCTL_TRAP_STOP. When set, it triggers a trap site, which behaves like group stop trap, in get_signal_to_deliver() after checking for pending signals. While ptraced, do_signal_stop() doesn't stop itself. It initiates group stop if requested and schedules JOBCTL_TRAP_STOP and returns. The caller - get_signal_to_deliver() - is responsible for checking whether TRAP_STOP is pending afterwards and handling it. ptrace_attach() is updated to use JOBCTL_TRAP_STOP instead of JOBCTL_STOP_PENDING and __ptrace_unlink() to clear all pending trap bits and TRAPPING so that TRAP_STOP and future trap bits don't linger after detach. While at it, add proper function comment to do_signal_stop() and make it return bool. -v2: __ptrace_unlink() updated to clear JOBCTL_TRAP_MASK and TRAPPING instead of JOBCTL_PENDING_MASK. This avoids accidentally clearing JOBCTL_STOP_CONSUME. Spotted by Oleg. -v3: do_signal_stop() updated to return %false without dropping siglock while ptraced and TRAP_STOP check moved inside for(;;) loop after group stop participation. This avoids unnecessary relocking and also will help avoiding unnecessary traps by consuming group stop before handling pending traps. -v4: Jobctl trap handling moved into a separate function - do_jobctl_trap(). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-14 09:20:14 +00:00
goto relock;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
signal: Better detection of synchronous signals Recently syzkaller was able to create unkillablle processes by creating a timer that is delivered as a thread local signal on SIGHUP, and receiving SIGHUP SA_NODEFERER. Ultimately causing a loop failing to deliver SIGHUP but always trying. When the stack overflows delivery of SIGHUP fails and force_sigsegv is called. Unfortunately because SIGSEGV is numerically higher than SIGHUP next_signal tries again to deliver a SIGHUP. From a quality of implementation standpoint attempting to deliver the timer SIGHUP signal is wrong. We should attempt to deliver the synchronous SIGSEGV signal we just forced. We can make that happening in a fairly straight forward manner by instead of just looking at the signal number we also look at the si_code. In particular for exceptions (aka synchronous signals) the si_code is always greater than 0. That still has the potential to pick up a number of asynchronous signals as in a few cases the same si_codes that are used for synchronous signals are also used for asynchronous signals, and SI_KERNEL is also included in the list of possible si_codes. Still the heuristic is much better and timer signals are definitely excluded. Which is enough to prevent all known ways for someone sending a process signals fast enough to cause unexpected and arguably incorrect behavior. Cc: stable@vger.kernel.org Fixes: a27341cd5fcb ("Prioritize synchronous signals over 'normal' signals") Tested-by: Dmitry Vyukov <dvyukov@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-02-06 23:51:47 +00:00
/*
* Signals generated by the execution of an instruction
* need to be delivered before any other pending signals
* so that the instruction pointer in the signal stack
* frame points to the faulting instruction.
*/
signr = dequeue_synchronous_signal(&ksig->info);
if (!signr)
signr = dequeue_signal(current, &current->blocked, &ksig->info);
tracehook: get_signal_to_deliver This defines the tracehook_get_signal() hook to allow tracing code to slip in before normal signal dequeuing. This lays the groundwork for new tracing features that can inject synthetic signals outside the normal queue or control the disposition of delivered signals. The calling convention lets tracehook_get_signal() decide both exactly what will happen and what signal number to report in the handler/exit. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Reviewed-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 02:45:53 +00:00
signal: remove three noop tracehooks Remove the following three noop tracehooks in signals.c. * tracehook_force_sigpending() * tracehook_get_signal() * tracehook_finish_jctl() The code area is about to be updated and these hooks don't do anything other than obfuscating the logic. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-02 09:14:00 +00:00
if (!signr)
break; /* will return 0 */
tracehook: get_signal_to_deliver This defines the tracehook_get_signal() hook to allow tracing code to slip in before normal signal dequeuing. This lays the groundwork for new tracing features that can inject synthetic signals outside the normal queue or control the disposition of delivered signals. The calling convention lets tracehook_get_signal() decide both exactly what will happen and what signal number to report in the handler/exit. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Reviewed-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 02:45:53 +00:00
ptrace: fix ptrace_signal() && STOP_DEQUEUED interaction Simple test-case, int main(void) { int pid, status; pid = fork(); if (!pid) { pause(); assert(0); return 0x23; } assert(ptrace(PTRACE_ATTACH, pid, 0,0) == 0); assert(wait(&status) == pid); assert(WIFSTOPPED(status) && WSTOPSIG(status) == SIGSTOP); kill(pid, SIGCONT); // <--- also clears STOP_DEQUEUD assert(ptrace(PTRACE_CONT, pid, 0,0) == 0); assert(wait(&status) == pid); assert(WIFSTOPPED(status) && WSTOPSIG(status) == SIGCONT); assert(ptrace(PTRACE_CONT, pid, 0, SIGSTOP) == 0); assert(wait(&status) == pid); assert(WIFSTOPPED(status) && WSTOPSIG(status) == SIGSTOP); kill(pid, SIGKILL); return 0; } Without the patch it hangs. After the patch SIGSTOP "injected" by the tracer is not ignored and stops the tracee. Note also that if this test-case uses, say, SIGWINCH instead of SIGCONT, everything works without the patch. This can't be right, and this is confusing. The problem is that SIGSTOP (or any other sig_kernel_stop() signal) has no effect without JOBCTL_STOP_DEQUEUED. This means it is simply ignored after PTRACE_CONT unless JOBCTL_STOP_DEQUEUED was set "by accident", say it wasn't cleared after initial SIGSTOP sent by PTRACE_ATTACH. At first glance we could change ptrace_signal() to add STOP_DEQUEUED after return from ptrace_stop(), but this is not right in case when the tracer does not change the reported SIGSTOP and SIGCONT comes in between. This is even more wrong with PT_SEIZED, SIGCONT adds JOBCTL_TRAP_NOTIFY which will be "lost" during the TRAP_STOP | TRAP_NOTIFY report. So lets add STOP_DEQUEUED _before_ we report the signal. It has no effect unless sig_kernel_stop() == T after the tracer resumes us, and in the latter case the pending STOP_DEQUEUED means no SIGCONT in between, we should stop. Note also that if SIGCONT was sent, PT_SEIZED tracee will correctly report PTRACE_EVENT_STOP/SIGTRAP and thus the tracer can notice the fact SIGSTOP was cancelled. Also, move the current->ptrace check from ptrace_signal() to its caller, get_signal_to_deliver(), this looks more natural. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-07-21 15:06:53 +00:00
if (unlikely(current->ptrace) && signr != SIGKILL) {
Rip out get_signal_to_deliver() Now we can turn get_signal() to the main function. Signed-off-by: Richard Weinberger <richard@nod.at>
2013-10-07 13:26:57 +00:00
signr = ptrace_signal(signr, &ksig->info);
signal: remove three noop tracehooks Remove the following three noop tracehooks in signals.c. * tracehook_force_sigpending() * tracehook_get_signal() * tracehook_finish_jctl() The code area is about to be updated and these hooks don't do anything other than obfuscating the logic. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-02 09:14:00 +00:00
if (!signr)
continue;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
signal: remove three noop tracehooks Remove the following three noop tracehooks in signals.c. * tracehook_force_sigpending() * tracehook_get_signal() * tracehook_finish_jctl() The code area is about to be updated and these hooks don't do anything other than obfuscating the logic. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-02 09:14:00 +00:00
ka = &sighand->action[signr-1];
tracepoint: Add signal deliver event Add a tracepoint where a process gets a signal. This tracepoint shows signal-number, sa-handler and sa-flag. Changes in v3: - Add docbook style comments Changes in v2: - Add siginfo argument - Fix comment Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Reviewed-by: Jason Baron <jbaron@redhat.com> Acked-by: Roland McGrath <roland@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Oleg Nesterov <oleg@redhat.com> LKML-Reference: <20091124215651.30449.20926.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-24 21:56:51 +00:00
/* Trace actually delivered signals. */
Rip out get_signal_to_deliver() Now we can turn get_signal() to the main function. Signed-off-by: Richard Weinberger <richard@nod.at>
2013-10-07 13:26:57 +00:00
trace_signal_deliver(signr, &ksig->info, ka);
tracepoint: Add signal deliver event Add a tracepoint where a process gets a signal. This tracepoint shows signal-number, sa-handler and sa-flag. Changes in v3: - Add docbook style comments Changes in v2: - Add siginfo argument - Fix comment Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Reviewed-by: Jason Baron <jbaron@redhat.com> Acked-by: Roland McGrath <roland@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Oleg Nesterov <oleg@redhat.com> LKML-Reference: <20091124215651.30449.20926.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-24 21:56:51 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (ka->sa.sa_handler == SIG_IGN) /* Do nothing. */
continue;
if (ka->sa.sa_handler != SIG_DFL) {
/* Run the handler. */
Rip out get_signal_to_deliver() Now we can turn get_signal() to the main function. Signed-off-by: Richard Weinberger <richard@nod.at>
2013-10-07 13:26:57 +00:00
ksig->ka = *ka;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (ka->sa.sa_flags & SA_ONESHOT)
ka->sa.sa_handler = SIG_DFL;
break; /* will return non-zero "signr" value */
}
/*
* Now we are doing the default action for this signal.
*/
if (sig_kernel_ignore(signr)) /* Default is nothing. */
continue;
[PATCH] add child reaper to pid_namespace Add a per pid_namespace child-reaper. This is needed so processes are reaped within the same pid space and do not spill over to the parent pid space. Its also needed so containers preserve existing semantic that pid == 1 would reap orphaned children. This is based on Eric Biederman's patch: http://lkml.org/lkml/2006/2/6/285 Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com> Signed-off-by: Cedric Le Goater <clg@fr.ibm.com> Cc: Kirill Korotaev <dev@openvz.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 10:38:01 +00:00
/*
pid namespaces: allow signalling cgroup-init Only the global-init process must be special - any other cgroup-init process must be killable to prevent run-away processes in the system. TODO: Ideally we should allow killing the cgroup-init only from parent cgroup and prevent it being killed from within the cgroup. But that is a more complex change and will be addressed by a follow-on patch. For now allow the cgroup-init to be terminated by any process with sufficient privileges. Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com> Acked-by: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 06:40:13 +00:00
* Global init gets no signals it doesn't want.
signals: protect cinit from blocked fatal signals Normally SIG_DFL signals to global and container-init are dropped early. But if a signal is blocked when it is posted, we cannot drop the signal since the receiver may install a handler before unblocking the signal. Once this signal is queued however, the receiver container-init has no way of knowing if the signal was sent from an ancestor or descendant namespace. This patch ensures that contianer-init drops all SIG_DFL signals in get_signal_to_deliver() except SIGKILL/SIGSTOP. If SIGSTOP/SIGKILL originate from a descendant of container-init they are never queued (i.e dropped in sig_ignored() in an earler patch). If SIGSTOP/SIGKILL originate from parent namespace, the signal is queued and container-init processes the signal. IOW, if get_signal_to_deliver() sees a sig_kernel_only() signal for global or container-init, the signal must have been generated internally or must have come from an ancestor ns and we process the signal. Further, the signal_group_exit() check was needed to cover the case of a multi-threaded init sending SIGKILL to other threads when doing an exit() or exec(). But since the new sig_kernel_only() check covers the SIGKILL, the signal_group_exit() check is no longer needed and can be removed. Finally, now that we have all pieces in place, set SIGNAL_UNKILLABLE for container-inits. Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Daniel Lezcano <daniel.lezcano@free.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 23:58:08 +00:00
* Container-init gets no signals it doesn't want from same
* container.
*
* Note that if global/container-init sees a sig_kernel_only()
* signal here, the signal must have been generated internally
* or must have come from an ancestor namespace. In either
* case, the signal cannot be dropped.
[PATCH] add child reaper to pid_namespace Add a per pid_namespace child-reaper. This is needed so processes are reaped within the same pid space and do not spill over to the parent pid space. Its also needed so containers preserve existing semantic that pid == 1 would reap orphaned children. This is based on Eric Biederman's patch: http://lkml.org/lkml/2006/2/6/285 Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com> Signed-off-by: Cedric Le Goater <clg@fr.ibm.com> Cc: Kirill Korotaev <dev@openvz.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 10:38:01 +00:00
*/
signals: fix /sbin/init protection from unwanted signals The global init has a lot of long standing problems with the unhandled fatal signals. - The "is_global_init(current)" check in get_signal_to_deliver() protects only the main thread. Sub-thread can dequee the fatal signal and shutdown the whole thread group except the main thread. If it dequeues SIGSTOP /sbin/init will be stopped, this is not right too. Note that we can't use is_global_init(->group_leader), this breaks exec and this can't solve other problems we have. - Even if afterwards ignored, the fatal signals sets SIGNAL_GROUP_EXIT on delivery. This breaks exec, has other bad implications, and this is just wrong. Introduce the new SIGNAL_UNKILLABLE flag to fix these problems. It also helps to solve some other problems addressed by the subsequent patches. Currently we use this flag for the global init only, but it could also be used by kthreads and (perhaps) by the sub-namespace inits. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:53:03 +00:00
if (unlikely(signal->flags & SIGNAL_UNKILLABLE) &&
signals: protect cinit from blocked fatal signals Normally SIG_DFL signals to global and container-init are dropped early. But if a signal is blocked when it is posted, we cannot drop the signal since the receiver may install a handler before unblocking the signal. Once this signal is queued however, the receiver container-init has no way of knowing if the signal was sent from an ancestor or descendant namespace. This patch ensures that contianer-init drops all SIG_DFL signals in get_signal_to_deliver() except SIGKILL/SIGSTOP. If SIGSTOP/SIGKILL originate from a descendant of container-init they are never queued (i.e dropped in sig_ignored() in an earler patch). If SIGSTOP/SIGKILL originate from parent namespace, the signal is queued and container-init processes the signal. IOW, if get_signal_to_deliver() sees a sig_kernel_only() signal for global or container-init, the signal must have been generated internally or must have come from an ancestor ns and we process the signal. Further, the signal_group_exit() check was needed to cover the case of a multi-threaded init sending SIGKILL to other threads when doing an exit() or exec(). But since the new sig_kernel_only() check covers the SIGKILL, the signal_group_exit() check is no longer needed and can be removed. Finally, now that we have all pieces in place, set SIGNAL_UNKILLABLE for container-inits. Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Daniel Lezcano <daniel.lezcano@free.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 23:58:08 +00:00
!sig_kernel_only(signr))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
continue;
if (sig_kernel_stop(signr)) {
/*
* The default action is to stop all threads in
* the thread group. The job control signals
* do nothing in an orphaned pgrp, but SIGSTOP
* always works. Note that siglock needs to be
* dropped during the call to is_orphaned_pgrp()
* because of lock ordering with tasklist_lock.
* This allows an intervening SIGCONT to be posted.
* We need to check for that and bail out if necessary.
*/
if (signr != SIGSTOP) {
get_signal_to_deliver: use the cached ->signal/sighand values Cache the values of current->signal/sighand. Shrinks .text a bit and makes the code more readable. Also, remove "sigset_t *mask", it is pointless because in fact we save the constant offset. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:47 +00:00
spin_unlock_irq(&sighand->siglock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* signals can be posted during this window */
[PATCH] pid: replace is_orphaned_pgrp with is_current_pgrp_orphaned Every call to is_orphaned_pgrp passed in process_group(current) which is racy with respect to another thread changing our process group. It didn't bite us because we were dealing with integers and the worse we would get would be a stale answer. In switching the checks to use struct pid to be a little more efficient and prepare the way for pid namespaces this race became apparent. So I simplified the calls to the more specialized is_current_pgrp_orphaned so I didn't have to worry about making logic changes to avoid the race. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 08:52:58 +00:00
if (is_current_pgrp_orphaned())
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
goto relock;
get_signal_to_deliver: use the cached ->signal/sighand values Cache the values of current->signal/sighand. Shrinks .text a bit and makes the code more readable. Also, remove "sigset_t *mask", it is pointless because in fact we save the constant offset. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:47 +00:00
spin_lock_irq(&sighand->siglock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
Rip out get_signal_to_deliver() Now we can turn get_signal() to the main function. Signed-off-by: Richard Weinberger <richard@nod.at>
2013-10-07 13:26:57 +00:00
if (likely(do_signal_stop(ksig->info.si_signo))) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* It released the siglock. */
goto relock;
}
/*
* We didn't actually stop, due to a race
* with SIGCONT or something like that.
*/
continue;
}
signal: Always notice exiting tasks Recently syzkaller was able to create unkillablle processes by creating a timer that is delivered as a thread local signal on SIGHUP, and receiving SIGHUP SA_NODEFERER. Ultimately causing a loop failing to deliver SIGHUP but always trying. Upon examination it turns out part of the problem is actually most of the solution. Since 2.5 signal delivery has found all fatal signals, marked the signal group for death, and queued SIGKILL in every threads thread queue relying on signal->group_exit_code to preserve the information of which was the actual fatal signal. The conversion of all fatal signals to SIGKILL results in the synchronous signal heuristic in next_signal kicking in and preferring SIGHUP to SIGKILL. Which is especially problematic as all fatal signals have already been transformed into SIGKILL. Instead of dequeueing signals and depending upon SIGKILL to be the first signal dequeued, first test if the signal group has already been marked for death. This guarantees that nothing in the signal queue can prevent a process that needs to exit from exiting. Cc: stable@vger.kernel.org Tested-by: Dmitry Vyukov <dvyukov@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Ref: ebf5ebe31d2c ("[PATCH] signal-fixes-2.5.59-A4") History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-02-07 00:39:40 +00:00
fatal:
get_signal_to_deliver: use the cached ->signal/sighand values Cache the values of current->signal/sighand. Shrinks .text a bit and makes the code more readable. Also, remove "sigset_t *mask", it is pointless because in fact we save the constant offset. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:47 +00:00
spin_unlock_irq(&sighand->siglock);
cgroup: never call do_group_exit() with task->frozen bit set I've got two independent reports that cgroup_task_frozen() check in cgroup_exit() has been triggered by lkp libhugetlbfs-test and LTP ptrace01 tests. For example: [ 44.576072] WARNING: CPU: 1 PID: 3028 at kernel/cgroup/cgroup.c:5932 cgroup_exit+0x148/0x160 [ 44.577724] Modules linked in: crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel sr_mod cdrom bochs_drm sg ttm ata_generic pata_acpi ppdev drm_kms_helper snd_pcm syscopyarea aesni_intel snd_timer sysfillrect sysimgblt snd crypto_simd cryptd glue_helper soundcore fb_sys_fops joydev drm serio_raw pcspkr ata_piix libata i2c_piix4 floppy parport_pc parport ip_tables [ 44.583106] CPU: 1 PID: 3028 Comm: ptrace-write-hu Not tainted 5.1.0-rc3-00053-g9262503 #5 [ 44.584600] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 [ 44.586116] RIP: 0010:cgroup_exit+0x148/0x160 [ 44.587135] Code: 0f 84 50 ff ff ff 48 8b 85 c8 0c 00 00 48 8b 78 70 e8 ec 2e 00 00 e9 3b ff ff ff f0 ff 43 60 0f 88 72 21 89 00 e9 48 ff ff ff <0f> 0b e9 1b ff ff ff e8 3c 73 f4 ff 66 90 66 2e 0f 1f 84 00 00 00 [ 44.590113] RSP: 0018:ffffb25702dcfd30 EFLAGS: 00010002 [ 44.591167] RAX: ffff96a7fee32410 RBX: ffff96a7ff1d6000 RCX: dead000000000200 [ 44.592446] RDX: ffff96a7ff1d6080 RSI: ffff96a7fec75290 RDI: ffff96a7fec75290 [ 44.593715] RBP: ffff96a7fec745c0 R08: ffff96a7fec74658 R09: 0000000000000000 [ 44.594985] R10: 0000000000000000 R11: 0000000000000001 R12: ffff96a7fec75101 [ 44.596266] R13: ffff96a7fec745c0 R14: ffff96a7ff3bde30 R15: ffff96a7fec75130 [ 44.597550] FS: 0000000000000000(0000) GS:ffff96a7dd700000(0000) knlGS:0000000000000000 [ 44.598950] CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 [ 44.600098] CR2: 00000000f7a00000 CR3: 000000000d20e000 CR4: 00000000000406e0 [ 44.601417] Call Trace: [ 44.602777] do_exit+0x337/0xc40 [ 44.603677] do_group_exit+0x3a/0xa0 [ 44.604610] get_signal+0x12e/0x8d0 [ 44.605533] ? __switch_to_asm+0x40/0x70 [ 44.606503] do_signal+0x36/0x650 [ 44.607409] ? __switch_to_asm+0x40/0x70 [ 44.608383] ? __schedule+0x267/0x860 [ 44.609329] exit_to_usermode_loop+0x89/0xf0 [ 44.610349] do_fast_syscall_32+0x251/0x2e3 [ 44.611357] entry_SYSENTER_compat+0x7f/0x91 [ 44.612376] ---[ end trace e4ca5cfc4b7f7964 ]--- The problem is caused by the ptrace_signal() call in the for loop in get_signal(). There is a cgroup_enter_frozen() call inside ptrace_signal(), so after exit from ptrace_signal() the task->frozen bit might be set. In this case do_group_exit() can be called with the task->frozen bit set and trigger the warning. This is only place where we can leave the loop with the task->frozen bit set and without setting JOBCTL_TRAP_FREEZE and TIF_SIGPENDING. To resolve this problem, let's move cgroup_leave_frozen(true) call to just after the fatal label. If the task is going to die, the frozen bit must be cleared no matter how we get into this point. Reported-by: kernel test robot <rong.a.chen@intel.com> Reported-by: Qian Cai <cai@lca.pw> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2019-05-08 20:34:20 +00:00
if (unlikely(cgroup_task_frozen(current)))
cgroup_leave_frozen(true);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* Anything else is fatal, maybe with a core dump.
*/
current->flags |= PF_SIGNALED;
signals: cleanup the usage of print_fatal_signal() Move the callsite of print_fatal_signal() down, under "if (sig_kernel_coredump(signr))", so we don't need to check signr != SIGKILL. We are only interested in the sig_kernel_coredump() signals anyway, and due to the previous changes we almost never can see other fatal signals here except SIGKILL. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:58 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (sig_kernel_coredump(signr)) {
signals: cleanup the usage of print_fatal_signal() Move the callsite of print_fatal_signal() down, under "if (sig_kernel_coredump(signr))", so we don't need to check signr != SIGKILL. We are only interested in the sig_kernel_coredump() signals anyway, and due to the previous changes we almost never can see other fatal signals here except SIGKILL. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:58 +00:00
if (print_fatal_signals)
Rip out get_signal_to_deliver() Now we can turn get_signal() to the main function. Signed-off-by: Richard Weinberger <richard@nod.at>
2013-10-07 13:26:57 +00:00
print_fatal_signal(ksig->info.si_signo);
connector: Added coredumping event to the process connector Process connector can now also detect coredumping events. Main aim of patch is get notified at start of coredumping, instead of having to wait for it to finish and then being notified through EXIT event. Could be used for instance by process-managers that want to get notified as soon as possible about process failures, and not necessarily beeing notified after coredump, which could be in the order of minutes depending on size of coredump, piping and so on. Signed-off-by: Jesper Derehag <jderehag@hotmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19 20:50:05 +00:00
proc_coredump_connector(current);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* If it was able to dump core, this kills all
* other threads in the group and synchronizes with
* their demise. If we lost the race with another
* thread getting here, it set group_exit_code
* first and our do_group_exit call below will use
* that value and ignore the one we pass it.
*/
Rip out get_signal_to_deliver() Now we can turn get_signal() to the main function. Signed-off-by: Richard Weinberger <richard@nod.at>
2013-10-07 13:26:57 +00:00
do_coredump(&ksig->info);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
/*
* Death signals, no core dump.
*/
Rip out get_signal_to_deliver() Now we can turn get_signal() to the main function. Signed-off-by: Richard Weinberger <richard@nod.at>
2013-10-07 13:26:57 +00:00
do_group_exit(ksig->info.si_signo);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* NOTREACHED */
}
get_signal_to_deliver: use the cached ->signal/sighand values Cache the values of current->signal/sighand. Shrinks .text a bit and makes the code more readable. Also, remove "sigset_t *mask", it is pointless because in fact we save the constant offset. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:47 +00:00
spin_unlock_irq(&sighand->siglock);
Rip out get_signal_to_deliver() Now we can turn get_signal() to the main function. Signed-off-by: Richard Weinberger <richard@nod.at>
2013-10-07 13:26:57 +00:00
ksig->sig = signr;
return ksig->sig > 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
signal: add block_sigmask() for adding sigmask to current->blocked Abstract the code sequence for adding a signal handler's sa_mask to current->blocked because the sequence is identical for all architectures. Furthermore, in the past some architectures actually got this code wrong, so introduce a wrapper that all architectures can use. Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Tejun Heo <tj@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10 23:11:17 +00:00
/**
new helper: signal_delivered() Does block_sigmask() + tracehook_signal_handler(); called when sigframe has been successfully built. All architectures converted to it; block_sigmask() itself is gone now (merged into this one). I'm still not too happy with the signature, but that's a separate story (IMO we need a structure that would contain signal number + siginfo + k_sigaction, so that get_signal_to_deliver() would fill one, signal_delivered(), handle_signal() and probably setup...frame() - take one). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-04-28 06:04:15 +00:00
* signal_delivered -
Clean up signal_delivered() - Pass a ksignal struct to it - Remove unused regs parameter - Make it private as it's nowhere outside of kernel/signal.c is used Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-13 11:36:04 +00:00
* @ksig: kernel signal struct
new helper: signal_delivered() Does block_sigmask() + tracehook_signal_handler(); called when sigframe has been successfully built. All architectures converted to it; block_sigmask() itself is gone now (merged into this one). I'm still not too happy with the signature, but that's a separate story (IMO we need a structure that would contain signal number + siginfo + k_sigaction, so that get_signal_to_deliver() would fill one, signal_delivered(), handle_signal() and probably setup...frame() - take one). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-04-28 06:04:15 +00:00
* @stepping: nonzero if debugger single-step or block-step in use
signal: add block_sigmask() for adding sigmask to current->blocked Abstract the code sequence for adding a signal handler's sa_mask to current->blocked because the sequence is identical for all architectures. Furthermore, in the past some architectures actually got this code wrong, so introduce a wrapper that all architectures can use. Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Tejun Heo <tj@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10 23:11:17 +00:00
*
treewide: Fix typo in Documentation/DocBook This patch fix spelling typo in Documentation/DocBook. It is because .html and .xml files are generated by make htmldocs, I have to fix a typo within the source files. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-02-18 13:54:36 +00:00
* This function should be called when a signal has successfully been
Clean up signal_delivered() - Pass a ksignal struct to it - Remove unused regs parameter - Make it private as it's nowhere outside of kernel/signal.c is used Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-13 11:36:04 +00:00
* delivered. It updates the blocked signals accordingly (@ksig->ka.sa.sa_mask
new helper: signal_delivered() Does block_sigmask() + tracehook_signal_handler(); called when sigframe has been successfully built. All architectures converted to it; block_sigmask() itself is gone now (merged into this one). I'm still not too happy with the signature, but that's a separate story (IMO we need a structure that would contain signal number + siginfo + k_sigaction, so that get_signal_to_deliver() would fill one, signal_delivered(), handle_signal() and probably setup...frame() - take one). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-04-28 06:04:15 +00:00
* is always blocked, and the signal itself is blocked unless %SA_NODEFER
Clean up signal_delivered() - Pass a ksignal struct to it - Remove unused regs parameter - Make it private as it's nowhere outside of kernel/signal.c is used Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-13 11:36:04 +00:00
* is set in @ksig->ka.sa.sa_flags. Tracing is notified.
signal: add block_sigmask() for adding sigmask to current->blocked Abstract the code sequence for adding a signal handler's sa_mask to current->blocked because the sequence is identical for all architectures. Furthermore, in the past some architectures actually got this code wrong, so introduce a wrapper that all architectures can use. Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Tejun Heo <tj@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10 23:11:17 +00:00
*/
Clean up signal_delivered() - Pass a ksignal struct to it - Remove unused regs parameter - Make it private as it's nowhere outside of kernel/signal.c is used Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-13 11:36:04 +00:00
static void signal_delivered(struct ksignal *ksig, int stepping)
signal: add block_sigmask() for adding sigmask to current->blocked Abstract the code sequence for adding a signal handler's sa_mask to current->blocked because the sequence is identical for all architectures. Furthermore, in the past some architectures actually got this code wrong, so introduce a wrapper that all architectures can use. Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Tejun Heo <tj@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10 23:11:17 +00:00
{
sigset_t blocked;
pull clearing RESTORE_SIGMASK into block_sigmask() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-22 03:42:15 +00:00
/* A signal was successfully delivered, and the
saved sigmask was stored on the signal frame,
and will be restored by sigreturn. So we can
simply clear the restore sigmask flag. */
clear_restore_sigmask();
Clean up signal_delivered() - Pass a ksignal struct to it - Remove unused regs parameter - Make it private as it's nowhere outside of kernel/signal.c is used Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-13 11:36:04 +00:00
sigorsets(&blocked, &current->blocked, &ksig->ka.sa.sa_mask);
if (!(ksig->ka.sa.sa_flags & SA_NODEFER))
sigaddset(&blocked, ksig->sig);
signal: add block_sigmask() for adding sigmask to current->blocked Abstract the code sequence for adding a signal handler's sa_mask to current->blocked because the sequence is identical for all architectures. Furthermore, in the past some architectures actually got this code wrong, so introduce a wrapper that all architectures can use. Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Tejun Heo <tj@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10 23:11:17 +00:00
set_current_blocked(&blocked);
tracehook_signal_handler: Remove sig, info, ka and regs These parameters are nowhere used, so we can remove them. Signed-off-by: Richard Weinberger <richard@nod.at>
2013-10-07 13:37:19 +00:00
tracehook_signal_handler(stepping);
signal: add block_sigmask() for adding sigmask to current->blocked Abstract the code sequence for adding a signal handler's sa_mask to current->blocked because the sequence is identical for all architectures. Furthermore, in the past some architectures actually got this code wrong, so introduce a wrapper that all architectures can use. Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Tejun Heo <tj@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10 23:11:17 +00:00
}
new helper: signal_setup_done() usual "call force_sigsegv or signal_delivered" logics. Takes ksignal instead of separate siginfo/k_sigaction. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-07 20:11:25 +00:00
void signal_setup_done(int failed, struct ksignal *ksig, int stepping)
{
if (failed)
signal: Remove task parameter from force_sigsegv The function force_sigsegv is always called on the current task so passing in current is redundant and not passing in current makes this fact obvious. This also makes it clear force_sigsegv always calls force_sig on the current task. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-21 15:03:48 +00:00
force_sigsegv(ksig->sig);
new helper: signal_setup_done() usual "call force_sigsegv or signal_delivered" logics. Takes ksignal instead of separate siginfo/k_sigaction. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-07 20:11:25 +00:00
else
Clean up signal_delivered() - Pass a ksignal struct to it - Remove unused regs parameter - Make it private as it's nowhere outside of kernel/signal.c is used Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-13 11:36:04 +00:00
signal_delivered(ksig, stepping);
new helper: signal_setup_done() usual "call force_sigsegv or signal_delivered" logics. Takes ksignal instead of separate siginfo/k_sigaction. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-07 20:11:25 +00:00
}
signal: introduce retarget_shared_pending() No functional changes. Move the notify-other-threads code from exit_signals() to the new helper, retarget_shared_pending(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-04-27 17:17:37 +00:00
/*
* It could be that complete_signal() picked us to notify about the
signal: retarget_shared_pending: optimize while_each_thread() loop retarget_shared_pending() blindly does recalc_sigpending_and_wake() for every sub-thread, this is suboptimal. We can check t->blocked and stop looping once every bit in shared_pending has the new target. Note: we do not take task_is_stopped_or_traced(t) into account, we are not trying to speed up the signal delivery or to avoid the unnecessary (but harmless) signal_wake_up(0) in this unlikely case. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-04-27 17:50:21 +00:00
* group-wide signal. Other threads should be notified now to take
* the shared signals in @which since we will not.
signal: introduce retarget_shared_pending() No functional changes. Move the notify-other-threads code from exit_signals() to the new helper, retarget_shared_pending(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-04-27 17:17:37 +00:00
*/
signal: retarget_shared_pending: consider shared/unblocked signals only exit_signals() checks signal_pending() before retarget_shared_pending() but this is suboptimal. We can avoid the while_each_thread() loop in case when there are no shared signals visible to us. Add the "shared_pending.signal & ~blocked" check. We don't use tsk->blocked directly but pass ~blocked as an argument, this is needed for the next patch. Note: we can optimize this more. while_each_thread(t) can check t->blocked into account and stop after every pending signal has the new target, see the next patch. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-04-27 17:18:39 +00:00
static void retarget_shared_pending(struct task_struct *tsk, sigset_t *which)
signal: introduce retarget_shared_pending() No functional changes. Move the notify-other-threads code from exit_signals() to the new helper, retarget_shared_pending(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-04-27 17:17:37 +00:00
{
signal: retarget_shared_pending: consider shared/unblocked signals only exit_signals() checks signal_pending() before retarget_shared_pending() but this is suboptimal. We can avoid the while_each_thread() loop in case when there are no shared signals visible to us. Add the "shared_pending.signal & ~blocked" check. We don't use tsk->blocked directly but pass ~blocked as an argument, this is needed for the next patch. Note: we can optimize this more. while_each_thread(t) can check t->blocked into account and stop after every pending signal has the new target, see the next patch. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-04-27 17:18:39 +00:00
sigset_t retarget;
signal: introduce retarget_shared_pending() No functional changes. Move the notify-other-threads code from exit_signals() to the new helper, retarget_shared_pending(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-04-27 17:17:37 +00:00
struct task_struct *t;
signal: retarget_shared_pending: consider shared/unblocked signals only exit_signals() checks signal_pending() before retarget_shared_pending() but this is suboptimal. We can avoid the while_each_thread() loop in case when there are no shared signals visible to us. Add the "shared_pending.signal & ~blocked" check. We don't use tsk->blocked directly but pass ~blocked as an argument, this is needed for the next patch. Note: we can optimize this more. while_each_thread(t) can check t->blocked into account and stop after every pending signal has the new target, see the next patch. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-04-27 17:18:39 +00:00
sigandsets(&retarget, &tsk->signal->shared_pending.signal, which);
if (sigisemptyset(&retarget))
return;
signal: introduce retarget_shared_pending() No functional changes. Move the notify-other-threads code from exit_signals() to the new helper, retarget_shared_pending(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-04-27 17:17:37 +00:00
t = tsk;
while_each_thread(tsk, t) {
signal: retarget_shared_pending: optimize while_each_thread() loop retarget_shared_pending() blindly does recalc_sigpending_and_wake() for every sub-thread, this is suboptimal. We can check t->blocked and stop looping once every bit in shared_pending has the new target. Note: we do not take task_is_stopped_or_traced(t) into account, we are not trying to speed up the signal delivery or to avoid the unnecessary (but harmless) signal_wake_up(0) in this unlikely case. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-04-27 17:50:21 +00:00
if (t->flags & PF_EXITING)
continue;
if (!has_pending_signals(&retarget, &t->blocked))
continue;
/* Remove the signals this thread can handle. */
sigandsets(&retarget, &retarget, &t->blocked);
if (!signal_pending(t))
signal_wake_up(t, 0);
if (sigisemptyset(&retarget))
break;
signal: introduce retarget_shared_pending() No functional changes. Move the notify-other-threads code from exit_signals() to the new helper, retarget_shared_pending(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-04-27 17:17:37 +00:00
}
}
fix group stop with exit race do_signal_stop() counts all sub-thread and sets ->group_stop_count accordingly. Every thread should decrement ->group_stop_count and stop, the last one should notify the parent. However a sub-thread can exit before it notices the signal_pending(), or it may be somewhere in do_exit() already. In that case the group stop never finishes properly. Note: this is a minimal fix, we can add some optimizations later. Say we can return quickly if thread_group_empty(). Also, we can move some signal related code from exit_notify() to exit_signals(). Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: Davide Libenzi <davidel@xmailserver.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 12:19:12 +00:00
void exit_signals(struct task_struct *tsk)
{
int group_stop = 0;
signal: retarget_shared_pending: consider shared/unblocked signals only exit_signals() checks signal_pending() before retarget_shared_pending() but this is suboptimal. We can avoid the while_each_thread() loop in case when there are no shared signals visible to us. Add the "shared_pending.signal & ~blocked" check. We don't use tsk->blocked directly but pass ~blocked as an argument, this is needed for the next patch. Note: we can optimize this more. while_each_thread(t) can check t->blocked into account and stop after every pending signal has the new target, see the next patch. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-04-27 17:18:39 +00:00
sigset_t unblocked;
fix group stop with exit race do_signal_stop() counts all sub-thread and sets ->group_stop_count accordingly. Every thread should decrement ->group_stop_count and stop, the last one should notify the parent. However a sub-thread can exit before it notices the signal_pending(), or it may be somewhere in do_exit() already. In that case the group stop never finishes properly. Note: this is a minimal fix, we can add some optimizations later. Say we can return quickly if thread_group_empty(). Also, we can move some signal related code from exit_notify() to exit_signals(). Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: Davide Libenzi <davidel@xmailserver.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 12:19:12 +00:00
threadgroup: extend threadgroup_lock() to cover exit and exec threadgroup_lock() protected only protected against new addition to the threadgroup, which was inherently somewhat incomplete and problematic for its only user cgroup. On-going migration could race against exec and exit leading to interesting problems - the symmetry between various attach methods, task exiting during method execution, ->exit() racing against attach methods, migrating task switching basic properties during exec and so on. This patch extends threadgroup_lock() such that it protects against all three threadgroup altering operations - fork, exit and exec. For exit, threadgroup_change_begin/end() calls are added to exit_signals around assertion of PF_EXITING. For exec, threadgroup_[un]lock() are updated to also grab and release cred_guard_mutex. With this change, threadgroup_lock() guarantees that the target threadgroup will remain stable - no new task will be added, no new PF_EXITING will be set and exec won't happen. The next patch will update cgroup so that it can take full advantage of this change. -v2: beefed up comment as suggested by Frederic. -v3: narrowed scope of protection in exit path as suggested by Frederic. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul Menage <paul@paulmenage.org> Cc: Linus Torvalds <torvalds@linux-foundation.org>
2011-12-13 02:12:21 +00:00
/*
* @tsk is about to have PF_EXITING set - lock out users which
* expect stable threadgroup.
*/
sched/headers, cgroups: Remove the threadgroup_change_*() wrappery threadgroup_change_begin()/end() is a pointless wrapper around cgroup_threadgroup_change_begin()/end(), minus a might_sleep() in the !CONFIG_CGROUPS=y case. Remove the wrappery, move the might_sleep() (the down_read() already has a might_sleep() check). This debloats <linux/sched.h> a bit and simplifies this API. Update all call sites. No change in functionality. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-02 10:50:56 +00:00
cgroup_threadgroup_change_begin(tsk);
threadgroup: extend threadgroup_lock() to cover exit and exec threadgroup_lock() protected only protected against new addition to the threadgroup, which was inherently somewhat incomplete and problematic for its only user cgroup. On-going migration could race against exec and exit leading to interesting problems - the symmetry between various attach methods, task exiting during method execution, ->exit() racing against attach methods, migrating task switching basic properties during exec and so on. This patch extends threadgroup_lock() such that it protects against all three threadgroup altering operations - fork, exit and exec. For exit, threadgroup_change_begin/end() calls are added to exit_signals around assertion of PF_EXITING. For exec, threadgroup_[un]lock() are updated to also grab and release cred_guard_mutex. With this change, threadgroup_lock() guarantees that the target threadgroup will remain stable - no new task will be added, no new PF_EXITING will be set and exec won't happen. The next patch will update cgroup so that it can take full advantage of this change. -v2: beefed up comment as suggested by Frederic. -v3: narrowed scope of protection in exit path as suggested by Frederic. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul Menage <paul@paulmenage.org> Cc: Linus Torvalds <torvalds@linux-foundation.org>
2011-12-13 02:12:21 +00:00
move the related code from exit_notify() to exit_signals() The previous bugfix was not optimal, we shouldn't care about group stop when we are the only thread or the group stop is in progress. In that case nothing special is needed, just set PF_EXITING and return. Also, take the related "TIF_SIGPENDING re-targeting" code from exit_notify(). So, from the performance POV the only difference is that we don't trust !signal_pending() until we take ->siglock. But this in fact fixes another ___pure___ theoretical minor race. __group_complete_signal() finds the task without PF_EXITING and chooses it as the target for signal_wake_up(). But nothing prevents this task from exiting in between without noticing the pending signal and thus unpredictably delaying the actual delivery. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 12:19:13 +00:00
if (thread_group_empty(tsk) || signal_group_exit(tsk->signal)) {
tsk->flags |= PF_EXITING;
sched/headers, cgroups: Remove the threadgroup_change_*() wrappery threadgroup_change_begin()/end() is a pointless wrapper around cgroup_threadgroup_change_begin()/end(), minus a might_sleep() in the !CONFIG_CGROUPS=y case. Remove the wrappery, move the might_sleep() (the down_read() already has a might_sleep() check). This debloats <linux/sched.h> a bit and simplifies this API. Update all call sites. No change in functionality. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-02 10:50:56 +00:00
cgroup_threadgroup_change_end(tsk);
move the related code from exit_notify() to exit_signals() The previous bugfix was not optimal, we shouldn't care about group stop when we are the only thread or the group stop is in progress. In that case nothing special is needed, just set PF_EXITING and return. Also, take the related "TIF_SIGPENDING re-targeting" code from exit_notify(). So, from the performance POV the only difference is that we don't trust !signal_pending() until we take ->siglock. But this in fact fixes another ___pure___ theoretical minor race. __group_complete_signal() finds the task without PF_EXITING and chooses it as the target for signal_wake_up(). But nothing prevents this task from exiting in between without noticing the pending signal and thus unpredictably delaying the actual delivery. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 12:19:13 +00:00
return;
fix group stop with exit race do_signal_stop() counts all sub-thread and sets ->group_stop_count accordingly. Every thread should decrement ->group_stop_count and stop, the last one should notify the parent. However a sub-thread can exit before it notices the signal_pending(), or it may be somewhere in do_exit() already. In that case the group stop never finishes properly. Note: this is a minimal fix, we can add some optimizations later. Say we can return quickly if thread_group_empty(). Also, we can move some signal related code from exit_notify() to exit_signals(). Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: Davide Libenzi <davidel@xmailserver.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 12:19:12 +00:00
}
move the related code from exit_notify() to exit_signals() The previous bugfix was not optimal, we shouldn't care about group stop when we are the only thread or the group stop is in progress. In that case nothing special is needed, just set PF_EXITING and return. Also, take the related "TIF_SIGPENDING re-targeting" code from exit_notify(). So, from the performance POV the only difference is that we don't trust !signal_pending() until we take ->siglock. But this in fact fixes another ___pure___ theoretical minor race. __group_complete_signal() finds the task without PF_EXITING and chooses it as the target for signal_wake_up(). But nothing prevents this task from exiting in between without noticing the pending signal and thus unpredictably delaying the actual delivery. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 12:19:13 +00:00
spin_lock_irq(&tsk->sighand->siglock);
fix group stop with exit race do_signal_stop() counts all sub-thread and sets ->group_stop_count accordingly. Every thread should decrement ->group_stop_count and stop, the last one should notify the parent. However a sub-thread can exit before it notices the signal_pending(), or it may be somewhere in do_exit() already. In that case the group stop never finishes properly. Note: this is a minimal fix, we can add some optimizations later. Say we can return quickly if thread_group_empty(). Also, we can move some signal related code from exit_notify() to exit_signals(). Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: Davide Libenzi <davidel@xmailserver.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 12:19:12 +00:00
/*
* From now this task is not visible for group-wide signals,
* see wants_signal(), do_signal_stop().
*/
tsk->flags |= PF_EXITING;
threadgroup: extend threadgroup_lock() to cover exit and exec threadgroup_lock() protected only protected against new addition to the threadgroup, which was inherently somewhat incomplete and problematic for its only user cgroup. On-going migration could race against exec and exit leading to interesting problems - the symmetry between various attach methods, task exiting during method execution, ->exit() racing against attach methods, migrating task switching basic properties during exec and so on. This patch extends threadgroup_lock() such that it protects against all three threadgroup altering operations - fork, exit and exec. For exit, threadgroup_change_begin/end() calls are added to exit_signals around assertion of PF_EXITING. For exec, threadgroup_[un]lock() are updated to also grab and release cred_guard_mutex. With this change, threadgroup_lock() guarantees that the target threadgroup will remain stable - no new task will be added, no new PF_EXITING will be set and exec won't happen. The next patch will update cgroup so that it can take full advantage of this change. -v2: beefed up comment as suggested by Frederic. -v3: narrowed scope of protection in exit path as suggested by Frederic. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul Menage <paul@paulmenage.org> Cc: Linus Torvalds <torvalds@linux-foundation.org>
2011-12-13 02:12:21 +00:00
sched/headers, cgroups: Remove the threadgroup_change_*() wrappery threadgroup_change_begin()/end() is a pointless wrapper around cgroup_threadgroup_change_begin()/end(), minus a might_sleep() in the !CONFIG_CGROUPS=y case. Remove the wrappery, move the might_sleep() (the down_read() already has a might_sleep() check). This debloats <linux/sched.h> a bit and simplifies this API. Update all call sites. No change in functionality. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-02 10:50:56 +00:00
cgroup_threadgroup_change_end(tsk);
threadgroup: extend threadgroup_lock() to cover exit and exec threadgroup_lock() protected only protected against new addition to the threadgroup, which was inherently somewhat incomplete and problematic for its only user cgroup. On-going migration could race against exec and exit leading to interesting problems - the symmetry between various attach methods, task exiting during method execution, ->exit() racing against attach methods, migrating task switching basic properties during exec and so on. This patch extends threadgroup_lock() such that it protects against all three threadgroup altering operations - fork, exit and exec. For exit, threadgroup_change_begin/end() calls are added to exit_signals around assertion of PF_EXITING. For exec, threadgroup_[un]lock() are updated to also grab and release cred_guard_mutex. With this change, threadgroup_lock() guarantees that the target threadgroup will remain stable - no new task will be added, no new PF_EXITING will be set and exec won't happen. The next patch will update cgroup so that it can take full advantage of this change. -v2: beefed up comment as suggested by Frederic. -v3: narrowed scope of protection in exit path as suggested by Frederic. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul Menage <paul@paulmenage.org> Cc: Linus Torvalds <torvalds@linux-foundation.org>
2011-12-13 02:12:21 +00:00
move the related code from exit_notify() to exit_signals() The previous bugfix was not optimal, we shouldn't care about group stop when we are the only thread or the group stop is in progress. In that case nothing special is needed, just set PF_EXITING and return. Also, take the related "TIF_SIGPENDING re-targeting" code from exit_notify(). So, from the performance POV the only difference is that we don't trust !signal_pending() until we take ->siglock. But this in fact fixes another ___pure___ theoretical minor race. __group_complete_signal() finds the task without PF_EXITING and chooses it as the target for signal_wake_up(). But nothing prevents this task from exiting in between without noticing the pending signal and thus unpredictably delaying the actual delivery. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 12:19:13 +00:00
if (!signal_pending(tsk))
goto out;
signal: retarget_shared_pending: consider shared/unblocked signals only exit_signals() checks signal_pending() before retarget_shared_pending() but this is suboptimal. We can avoid the while_each_thread() loop in case when there are no shared signals visible to us. Add the "shared_pending.signal & ~blocked" check. We don't use tsk->blocked directly but pass ~blocked as an argument, this is needed for the next patch. Note: we can optimize this more. while_each_thread(t) can check t->blocked into account and stop after every pending signal has the new target, see the next patch. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-04-27 17:18:39 +00:00
unblocked = tsk->blocked;
signotset(&unblocked);
retarget_shared_pending(tsk, &unblocked);
move the related code from exit_notify() to exit_signals() The previous bugfix was not optimal, we shouldn't care about group stop when we are the only thread or the group stop is in progress. In that case nothing special is needed, just set PF_EXITING and return. Also, take the related "TIF_SIGPENDING re-targeting" code from exit_notify(). So, from the performance POV the only difference is that we don't trust !signal_pending() until we take ->siglock. But this in fact fixes another ___pure___ theoretical minor race. __group_complete_signal() finds the task without PF_EXITING and chooses it as the target for signal_wake_up(). But nothing prevents this task from exiting in between without noticing the pending signal and thus unpredictably delaying the actual delivery. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 12:19:13 +00:00
job control: rename signal->group_stop and flags to jobctl and update them signal->group_stop currently hosts mostly group stop related flags; however, it's gonna be used for wider purposes and the GROUP_STOP_ flag prefix becomes confusing. Rename signal->group_stop to signal->jobctl and rename all GROUP_STOP_* flags to JOBCTL_*. Bit position macros JOBCTL_*_BIT are defined and JOBCTL_* flags are defined in terms of them to allow using bitops later. While at it, reassign JOBCTL_TRAPPING to bit 22 to better accomodate future additions. This doesn't cause any functional change. -v2: JOBCTL_*_BIT macros added as suggested by Linus. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-02 09:13:59 +00:00
if (unlikely(tsk->jobctl & JOBCTL_STOP_PENDING) &&
signal: Fix premature completion of group stop when interfered by ptrace task->signal->group_stop_count is used to track the progress of group stop. It's initialized to the number of tasks which need to stop for group stop to finish and each stopping or trapping task decrements. However, each task doesn't keep track of whether it decremented the counter or not and if woken up before the group stop is complete and stops again, it can decrement the counter multiple times. Please consider the following example code. static void *worker(void *arg) { while (1) ; return NULL; } int main(void) { pthread_t thread; pid_t pid; int i; pid = fork(); if (!pid) { for (i = 0; i < 5; i++) pthread_create(&thread, NULL, worker, NULL); while (1) ; return 0; } ptrace(PTRACE_ATTACH, pid, NULL, NULL); while (1) { waitid(P_PID, pid, NULL, WSTOPPED); ptrace(PTRACE_SINGLESTEP, pid, NULL, (void *)(long)SIGSTOP); } return 0; } The child creates five threads and the parent continuously traps the first thread and whenever the child gets a signal, SIGSTOP is delivered. If an external process sends SIGSTOP to the child, all other threads in the process should reliably stop. However, due to the above bug, the first thread will often end up consuming group_stop_count multiple times and SIGSTOP often ends up stopping none or part of the other four threads. This patch adds a new field task->group_stop which is protected by siglock and uses GROUP_STOP_CONSUME flag to track which task is still to consume group_stop_count to fix this bug. task_clear_group_stop_pending() and task_participate_group_stop() are added to help manipulating group stop states. As ptrace_stop() now also uses task_participate_group_stop(), it will set SIGNAL_STOP_STOPPED if it completes a group stop. There still are many issues regarding the interaction between group stop and ptrace. Patches to address them will follow. - Oleg spotted duplicate GROUP_STOP_CONSUME. Dropped. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com>
2011-03-23 09:37:00 +00:00
task_participate_group_stop(tsk))
ptrace: Kill tracehook_notify_jctl() tracehook_notify_jctl() aids in determining whether and what to report to the parent when a task is stopped or continued. The function also adds an extra requirement that siglock may be released across it, which is currently unused and quite difficult to satisfy in well-defined manner. As job control and the notifications are about to receive major overhaul, remove the tracehook and open code it. If ever necessary, let's factor it out after the overhaul. * Oleg spotted incorrect CLD_CONTINUED/STOPPED selection when ptraced. Fixed. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com>
2011-03-23 09:37:00 +00:00
group_stop = CLD_STOPPED;
move the related code from exit_notify() to exit_signals() The previous bugfix was not optimal, we shouldn't care about group stop when we are the only thread or the group stop is in progress. In that case nothing special is needed, just set PF_EXITING and return. Also, take the related "TIF_SIGPENDING re-targeting" code from exit_notify(). So, from the performance POV the only difference is that we don't trust !signal_pending() until we take ->siglock. But this in fact fixes another ___pure___ theoretical minor race. __group_complete_signal() finds the task without PF_EXITING and chooses it as the target for signal_wake_up(). But nothing prevents this task from exiting in between without noticing the pending signal and thus unpredictably delaying the actual delivery. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 12:19:13 +00:00
out:
fix group stop with exit race do_signal_stop() counts all sub-thread and sets ->group_stop_count accordingly. Every thread should decrement ->group_stop_count and stop, the last one should notify the parent. However a sub-thread can exit before it notices the signal_pending(), or it may be somewhere in do_exit() already. In that case the group stop never finishes properly. Note: this is a minimal fix, we can add some optimizations later. Say we can return quickly if thread_group_empty(). Also, we can move some signal related code from exit_notify() to exit_signals(). Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: Davide Libenzi <davidel@xmailserver.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 12:19:12 +00:00
spin_unlock_irq(&tsk->sighand->siglock);
job control: Job control stop notifications should always go to the real parent The stopped notifications in do_signal_stop() and exit_signals() are always for the completion of job control. The one in do_signal_stop() may be delivered to the ptracer if PTRACE_ATTACH races with notification and the one in exit_signals() if task exits while ptraced. In both cases, the notifications are meaningless and confusing to the ptracer as it never accesses the group stop state while the real parent would miss notifications for the events it is watching. Make sure these notifications always go to the real parent by calling do_notify_parent_cld_stop() with %false @for_ptrace. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com>
2011-03-23 09:37:01 +00:00
/*
* If group stop has completed, deliver the notification. This
* should always go to the real parent of the group leader.
*/
signals: tracehook_notify_jctl change This changes tracehook_notify_jctl() so it's called with the siglock held, and changes its argument and return value definition. These clean-ups make it a better fit for what new tracing hooks need to check. Tracing needs the siglock here, held from the time TASK_STOPPED was set, to avoid potential SIGCONT races if it wants to allow any blocking in its tracing hooks. This also folds the finish_stop() function into its caller do_signal_stop(). The function is short, called only once and only unconditionally. It aids readability to fold it in. [oleg@redhat.com: do not call tracehook_notify_jctl() in TASK_STOPPED state] [oleg@redhat.com: introduce tracehook_finish_jctl() helper] Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 22:56:53 +00:00
if (unlikely(group_stop)) {
fix group stop with exit race do_signal_stop() counts all sub-thread and sets ->group_stop_count accordingly. Every thread should decrement ->group_stop_count and stop, the last one should notify the parent. However a sub-thread can exit before it notices the signal_pending(), or it may be somewhere in do_exit() already. In that case the group stop never finishes properly. Note: this is a minimal fix, we can add some optimizations later. Say we can return quickly if thread_group_empty(). Also, we can move some signal related code from exit_notify() to exit_signals(). Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: Davide Libenzi <davidel@xmailserver.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 12:19:12 +00:00
read_lock(&tasklist_lock);
job control: Job control stop notifications should always go to the real parent The stopped notifications in do_signal_stop() and exit_signals() are always for the completion of job control. The one in do_signal_stop() may be delivered to the ptracer if PTRACE_ATTACH races with notification and the one in exit_signals() if task exits while ptraced. In both cases, the notifications are meaningless and confusing to the ptracer as it never accesses the group stop state while the real parent would miss notifications for the events it is watching. Make sure these notifications always go to the real parent by calling do_notify_parent_cld_stop() with %false @for_ptrace. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com>
2011-03-23 09:37:01 +00:00
do_notify_parent_cldstop(tsk, false, group_stop);
fix group stop with exit race do_signal_stop() counts all sub-thread and sets ->group_stop_count accordingly. Every thread should decrement ->group_stop_count and stop, the last one should notify the parent. However a sub-thread can exit before it notices the signal_pending(), or it may be somewhere in do_exit() already. In that case the group stop never finishes properly. Note: this is a minimal fix, we can add some optimizations later. Say we can return quickly if thread_group_empty(). Also, we can move some signal related code from exit_notify() to exit_signals(). Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: Davide Libenzi <davidel@xmailserver.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 12:19:12 +00:00
read_unlock(&tasklist_lock);
}
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* System call entry points.
*/
kernel/signal.c: add kernel-doc notation to syscalls Add kernel-doc to syscalls in signal.c. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-04 22:00:26 +00:00
/**
* sys_restart_syscall - restart a system call
*/
[CVE-2009-0029] System call wrappers part 07 Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 13:14:09 +00:00
SYSCALL_DEFINE0(restart_syscall)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
all arches, signal: move restart_block to struct task_struct If an attacker can cause a controlled kernel stack overflow, overwriting the restart block is a very juicy exploit target. This is because the restart_block is held in the same memory allocation as the kernel stack. Moving the restart block to struct task_struct prevents this exploit by making the restart_block harder to locate. Note that there are other fields in thread_info that are also easy targets, at least on some architectures. It's also a decent simplification, since the restart code is more or less identical on all architectures. [james.hogan@imgtec.com: metag: align thread_info::supervisor_stack] Signed-off-by: Andy Lutomirski <luto@amacapital.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: David Miller <davem@davemloft.net> Acked-by: Richard Weinberger <richard@nod.at> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Steven Miao <realmz6@gmail.com> Cc: Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Tested-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Chen Liqin <liqin.linux@gmail.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 23:01:14 +00:00
struct restart_block *restart = &current->restart_block;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return restart->fn(restart);
}
long do_no_restart_syscall(struct restart_block *param)
{
return -EINTR;
}
signal: do_sigtimedwait() needs retarget_shared_pending() do_sigtimedwait() changes current->blocked and thus it needs set_current_blocked()->retarget_shared_pending(). We could use set_current_blocked() directly. It is fine to change ->real_blocked from all-zeroes to ->blocked and vice versa lockless, but this is not immediately clear, looks racy, and needs a huge comment to explain why this is correct. To keep the things simple this patch adds the new static helper, __set_task_blocked() which should be called with ->siglock held. This way we can change both ->real_blocked and ->blocked atomically under ->siglock as the current code does. This is more understandable. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com>
2011-04-27 19:56:14 +00:00
static void __set_task_blocked(struct task_struct *tsk, const sigset_t *newset)
{
if (signal_pending(tsk) && !thread_group_empty(tsk)) {
sigset_t newblocked;
/* A set of now blocked but previously unblocked signals. */
signal: rename signandsets() to sigandnsets() As Tejun and Linus pointed out, "nand" is the wrong name for "x & ~y", it should be "andn". Rename signandsets() as suggested. Suggested-by: Tejun Heo <tj@kernel.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-04-27 20:01:27 +00:00
sigandnsets(&newblocked, newset, &current->blocked);
signal: do_sigtimedwait() needs retarget_shared_pending() do_sigtimedwait() changes current->blocked and thus it needs set_current_blocked()->retarget_shared_pending(). We could use set_current_blocked() directly. It is fine to change ->real_blocked from all-zeroes to ->blocked and vice versa lockless, but this is not immediately clear, looks racy, and needs a huge comment to explain why this is correct. To keep the things simple this patch adds the new static helper, __set_task_blocked() which should be called with ->siglock held. This way we can change both ->real_blocked and ->blocked atomically under ->siglock as the current code does. This is more understandable. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com>
2011-04-27 19:56:14 +00:00
retarget_shared_pending(tsk, &newblocked);
}
tsk->blocked = *newset;
recalc_sigpending();
}
signal: sigprocmask() should do retarget_shared_pending() In short, almost every changing of current->blocked is wrong, or at least can lead to the unexpected results. For example. Two threads T1 and T2, T1 sleeps in sigtimedwait/pause/etc. kill(tgid, SIG) can pick T2 for TIF_SIGPENDING. If T2 calls sigprocmask() and blocks SIG before it notices the pending signal, nobody else can handle this pending shared signal. I am not sure this is bug, but at least this looks strange imho. T1 should not sleep forever, there is a signal which should wake it up. This patch moves the code which actually changes ->blocked into the new helper, set_current_blocked() and changes this code to call retarget_shared_pending() as exit_signals() does. We should only care about the signals we just blocked, we use "newset & ~current->blocked" as a mask. We do not check !sigisemptyset(newblocked), retarget_shared_pending() is cheap unless mask & shared_pending. Note: for this particular case we could simply change sigprocmask() to return -EINTR if signal_pending(), but then we should change other callers and, more importantly, if we need this fix then set_current_blocked() will have more callers and some of them can't restart. See the next patch as a random example. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-04-27 18:59:41 +00:00
/**
* set_current_blocked - change current->blocked mask
* @newset: new mask
*
* It is wrong to change ->blocked directly, this helper should be used
* to ensure the process can't miss a shared signal we are going to block.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
most of set_current_blocked() callers want SIGKILL/SIGSTOP removed from set Only 3 out of 63 do not. Renamed the current variant to __set_current_blocked(), added set_current_blocked() that will exclude unblockable signals, switched open-coded instances to it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-04-27 17:58:59 +00:00
void set_current_blocked(sigset_t *newset)
{
sigdelsetmask(newset, sigmask(SIGKILL) | sigmask(SIGSTOP));
signals: set_current_blocked() can use __set_current_blocked() Cleanup. And I think we need more cleanups, in particular __set_current_blocked() and sigprocmask() should die. Nobody should ever block SIGKILL or SIGSTOP. - Change set_current_blocked() to use __set_current_blocked() - Change sys_sigprocmask() to use set_current_blocked(), this way it should not worry about SIGKILL/SIGSTOP. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-05 18:13:29 +00:00
__set_current_blocked(newset);
most of set_current_blocked() callers want SIGKILL/SIGSTOP removed from set Only 3 out of 63 do not. Renamed the current variant to __set_current_blocked(), added set_current_blocked() that will exclude unblockable signals, switched open-coded instances to it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-04-27 17:58:59 +00:00
}
void __set_current_blocked(const sigset_t *newset)
signal: sigprocmask() should do retarget_shared_pending() In short, almost every changing of current->blocked is wrong, or at least can lead to the unexpected results. For example. Two threads T1 and T2, T1 sleeps in sigtimedwait/pause/etc. kill(tgid, SIG) can pick T2 for TIF_SIGPENDING. If T2 calls sigprocmask() and blocks SIG before it notices the pending signal, nobody else can handle this pending shared signal. I am not sure this is bug, but at least this looks strange imho. T1 should not sleep forever, there is a signal which should wake it up. This patch moves the code which actually changes ->blocked into the new helper, set_current_blocked() and changes this code to call retarget_shared_pending() as exit_signals() does. We should only care about the signals we just blocked, we use "newset & ~current->blocked" as a mask. We do not check !sigisemptyset(newblocked), retarget_shared_pending() is cheap unless mask & shared_pending. Note: for this particular case we could simply change sigprocmask() to return -EINTR if signal_pending(), but then we should change other callers and, more importantly, if we need this fix then set_current_blocked() will have more callers and some of them can't restart. See the next patch as a random example. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-04-27 18:59:41 +00:00
{
struct task_struct *tsk = current;
signals: avoid unnecessary taking of sighand->siglock When running certain database workload on a high-end system with many CPUs, it was found that spinlock contention in the sigprocmask syscalls became a significant portion of the overall CPU cycles as shown below. 9.30% 9.30% 905387 dataserver /proc/kcore 0x7fff8163f4d2 [k] _raw_spin_lock_irq | ---_raw_spin_lock_irq | |--99.34%-- __set_current_blocked | sigprocmask | sys_rt_sigprocmask | system_call_fastpath | | | |--50.63%-- __swapcontext | | | | | |--99.91%-- upsleepgeneric | | | |--49.36%-- __setcontext | | ktskRun Looking further into the swapcontext function in glibc, it was found that the function always call sigprocmask() without checking if there are changes in the signal mask. A check was added to the __set_current_blocked() function to avoid taking the sighand->siglock spinlock if there is no change in the signal mask. This will prevent unneeded spinlock contention when many threads are trying to call sigprocmask(). With this patch applied, the spinlock contention in sigprocmask() was gone. Link: http://lkml.kernel.org/r/1474979209-11867-1-git-send-email-Waiman.Long@hpe.com Signed-off-by: Waiman Long <Waiman.Long@hpe.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Stas Sergeev <stsp@list.ru> Cc: Scott J Norton <scott.norton@hpe.com> Cc: Douglas Hatch <doug.hatch@hpe.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-14 23:04:10 +00:00
/*
* In case the signal mask hasn't changed, there is nothing we need
* to do. The current->blocked shouldn't be modified by other task.
*/
if (sigequalsets(&tsk->blocked, newset))
return;
signal: sigprocmask() should do retarget_shared_pending() In short, almost every changing of current->blocked is wrong, or at least can lead to the unexpected results. For example. Two threads T1 and T2, T1 sleeps in sigtimedwait/pause/etc. kill(tgid, SIG) can pick T2 for TIF_SIGPENDING. If T2 calls sigprocmask() and blocks SIG before it notices the pending signal, nobody else can handle this pending shared signal. I am not sure this is bug, but at least this looks strange imho. T1 should not sleep forever, there is a signal which should wake it up. This patch moves the code which actually changes ->blocked into the new helper, set_current_blocked() and changes this code to call retarget_shared_pending() as exit_signals() does. We should only care about the signals we just blocked, we use "newset & ~current->blocked" as a mask. We do not check !sigisemptyset(newblocked), retarget_shared_pending() is cheap unless mask & shared_pending. Note: for this particular case we could simply change sigprocmask() to return -EINTR if signal_pending(), but then we should change other callers and, more importantly, if we need this fix then set_current_blocked() will have more callers and some of them can't restart. See the next patch as a random example. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-04-27 18:59:41 +00:00
spin_lock_irq(&tsk->sighand->siglock);
signal: do_sigtimedwait() needs retarget_shared_pending() do_sigtimedwait() changes current->blocked and thus it needs set_current_blocked()->retarget_shared_pending(). We could use set_current_blocked() directly. It is fine to change ->real_blocked from all-zeroes to ->blocked and vice versa lockless, but this is not immediately clear, looks racy, and needs a huge comment to explain why this is correct. To keep the things simple this patch adds the new static helper, __set_task_blocked() which should be called with ->siglock held. This way we can change both ->real_blocked and ->blocked atomically under ->siglock as the current code does. This is more understandable. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com>
2011-04-27 19:56:14 +00:00
__set_task_blocked(tsk, newset);
signal: sigprocmask() should do retarget_shared_pending() In short, almost every changing of current->blocked is wrong, or at least can lead to the unexpected results. For example. Two threads T1 and T2, T1 sleeps in sigtimedwait/pause/etc. kill(tgid, SIG) can pick T2 for TIF_SIGPENDING. If T2 calls sigprocmask() and blocks SIG before it notices the pending signal, nobody else can handle this pending shared signal. I am not sure this is bug, but at least this looks strange imho. T1 should not sleep forever, there is a signal which should wake it up. This patch moves the code which actually changes ->blocked into the new helper, set_current_blocked() and changes this code to call retarget_shared_pending() as exit_signals() does. We should only care about the signals we just blocked, we use "newset & ~current->blocked" as a mask. We do not check !sigisemptyset(newblocked), retarget_shared_pending() is cheap unless mask & shared_pending. Note: for this particular case we could simply change sigprocmask() to return -EINTR if signal_pending(), but then we should change other callers and, more importantly, if we need this fix then set_current_blocked() will have more callers and some of them can't restart. See the next patch as a random example. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-04-27 18:59:41 +00:00
spin_unlock_irq(&tsk->sighand->siglock);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* This is also useful for kernel threads that want to temporarily
* (or permanently) block certain signals.
*
* NOTE! Unlike the user-mode sys_sigprocmask(), the kernel
* interface happily blocks "unblockable" signals like SIGKILL
* and friends.
*/
int sigprocmask(int how, sigset_t *set, sigset_t *oldset)
{
signal: sigprocmask: narrow the scope of ->siglock No functional changes, preparation to simplify the review of the next change. 1. We can read current->block lockless, nobody else can ever change this mask. 2. Calculate the resulting sigset_t outside of ->siglock into the temporary variable, then take ->siglock and change ->blocked. Also, kill the stale comment about BKL. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-04-27 17:54:20 +00:00
struct task_struct *tsk = current;
sigset_t newset;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
signal: sigprocmask: narrow the scope of ->siglock No functional changes, preparation to simplify the review of the next change. 1. We can read current->block lockless, nobody else can ever change this mask. 2. Calculate the resulting sigset_t outside of ->siglock into the temporary variable, then take ->siglock and change ->blocked. Also, kill the stale comment about BKL. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-04-27 17:54:20 +00:00
/* Lockless, only current can change ->blocked, never from irq */
[PATCH] sigprocmask: kill unneeded temp var Cleanup, remove unneeded double copying of current->blocked. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 11:00:49 +00:00
if (oldset)
signal: sigprocmask: narrow the scope of ->siglock No functional changes, preparation to simplify the review of the next change. 1. We can read current->block lockless, nobody else can ever change this mask. 2. Calculate the resulting sigset_t outside of ->siglock into the temporary variable, then take ->siglock and change ->blocked. Also, kill the stale comment about BKL. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-04-27 17:54:20 +00:00
*oldset = tsk->blocked;
[PATCH] sigprocmask: kill unneeded temp var Cleanup, remove unneeded double copying of current->blocked. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 11:00:49 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
switch (how) {
case SIG_BLOCK:
signal: sigprocmask: narrow the scope of ->siglock No functional changes, preparation to simplify the review of the next change. 1. We can read current->block lockless, nobody else can ever change this mask. 2. Calculate the resulting sigset_t outside of ->siglock into the temporary variable, then take ->siglock and change ->blocked. Also, kill the stale comment about BKL. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-04-27 17:54:20 +00:00
sigorsets(&newset, &tsk->blocked, set);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
break;
case SIG_UNBLOCK:
signal: rename signandsets() to sigandnsets() As Tejun and Linus pointed out, "nand" is the wrong name for "x & ~y", it should be "andn". Rename signandsets() as suggested. Suggested-by: Tejun Heo <tj@kernel.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-04-27 20:01:27 +00:00
sigandnsets(&newset, &tsk->blocked, set);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
break;
case SIG_SETMASK:
signal: sigprocmask: narrow the scope of ->siglock No functional changes, preparation to simplify the review of the next change. 1. We can read current->block lockless, nobody else can ever change this mask. 2. Calculate the resulting sigset_t outside of ->siglock into the temporary variable, then take ->siglock and change ->blocked. Also, kill the stale comment about BKL. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-04-27 17:54:20 +00:00
newset = *set;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
break;
default:
signal: sigprocmask: narrow the scope of ->siglock No functional changes, preparation to simplify the review of the next change. 1. We can read current->block lockless, nobody else can ever change this mask. 2. Calculate the resulting sigset_t outside of ->siglock into the temporary variable, then take ->siglock and change ->blocked. Also, kill the stale comment about BKL. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-04-27 17:54:20 +00:00
return -EINVAL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
[PATCH] sigprocmask: kill unneeded temp var Cleanup, remove unneeded double copying of current->blocked. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 11:00:49 +00:00
most of set_current_blocked() callers want SIGKILL/SIGSTOP removed from set Only 3 out of 63 do not. Renamed the current variant to __set_current_blocked(), added set_current_blocked() that will exclude unblockable signals, switched open-coded instances to it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-04-27 17:58:59 +00:00
__set_current_blocked(&newset);
signal: sigprocmask: narrow the scope of ->siglock No functional changes, preparation to simplify the review of the next change. 1. We can read current->block lockless, nobody else can ever change this mask. 2. Calculate the resulting sigset_t outside of ->siglock into the temporary variable, then take ->siglock and change ->blocked. Also, kill the stale comment about BKL. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-04-27 17:54:20 +00:00
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
signal: Pair exports with their functions For readability and consistency with the other exports in kernel/signal.c pair the exports of signal sending functions with their functions, instead of having the exports in one big clump. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-13 17:26:35 +00:00
EXPORT_SYMBOL(sigprocmask);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
signal: Add set_user_sigmask() Refactor reading sigset from userspace and updating sigmask into an api. This is useful for versions of syscalls that pass in the sigmask and expect the current->sigmask to be changed during, and restored after, the execution of the syscall. With the advent of new y2038 syscalls in the subsequent patches, we add two more new versions of the syscalls (for pselect, ppoll, and io_pgetevents) in addition to the existing native and compat versions. Adding such an api reduces the logic that would need to be replicated otherwise. Note that the calls to sigprocmask() ignored the return value from the api as the function only returns an error on an invalid first argument that is hardcoded at these call sites. The updated logic uses set_current_blocked() instead. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-09-20 04:41:04 +00:00
/*
* The api helps set app-provided sigmasks.
*
* This is useful for syscalls such as ppoll, pselect, io_pgetevents and
* epoll_pwait where a new sigmask is passed from userland for the syscalls.
signal: simplify set_user_sigmask/restore_user_sigmask task->saved_sigmask and ->restore_sigmask are only used in the ret-from- syscall paths. This means that set_user_sigmask() can save ->blocked in ->saved_sigmask and do set_restore_sigmask() to indicate that ->blocked was modified. This way the callers do not need 2 sigset_t's passed to set/restore and restore_user_sigmask() renamed to restore_saved_sigmask_unless() turns into the trivial helper which just calls restore_saved_sigmask(). Link: http://lkml.kernel.org/r/20190606113206.GA9464@redhat.com Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Deepa Dinamani <deepa.kernel@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Eric Wong <e@80x24.org> Cc: Jason Baron <jbaron@akamai.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: David Laight <David.Laight@aculab.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16 23:29:53 +00:00
*
* Note that it does set_restore_sigmask() in advance, so it must be always
* paired with restore_saved_sigmask_unless() before return from syscall.
signal: Add set_user_sigmask() Refactor reading sigset from userspace and updating sigmask into an api. This is useful for versions of syscalls that pass in the sigmask and expect the current->sigmask to be changed during, and restored after, the execution of the syscall. With the advent of new y2038 syscalls in the subsequent patches, we add two more new versions of the syscalls (for pselect, ppoll, and io_pgetevents) in addition to the existing native and compat versions. Adding such an api reduces the logic that would need to be replicated otherwise. Note that the calls to sigprocmask() ignored the return value from the api as the function only returns an error on an invalid first argument that is hardcoded at these call sites. The updated logic uses set_current_blocked() instead. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-09-20 04:41:04 +00:00
*/
signal: simplify set_user_sigmask/restore_user_sigmask task->saved_sigmask and ->restore_sigmask are only used in the ret-from- syscall paths. This means that set_user_sigmask() can save ->blocked in ->saved_sigmask and do set_restore_sigmask() to indicate that ->blocked was modified. This way the callers do not need 2 sigset_t's passed to set/restore and restore_user_sigmask() renamed to restore_saved_sigmask_unless() turns into the trivial helper which just calls restore_saved_sigmask(). Link: http://lkml.kernel.org/r/20190606113206.GA9464@redhat.com Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Deepa Dinamani <deepa.kernel@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Eric Wong <e@80x24.org> Cc: Jason Baron <jbaron@akamai.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: David Laight <David.Laight@aculab.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16 23:29:53 +00:00
int set_user_sigmask(const sigset_t __user *umask, size_t sigsetsize)
signal: Add set_user_sigmask() Refactor reading sigset from userspace and updating sigmask into an api. This is useful for versions of syscalls that pass in the sigmask and expect the current->sigmask to be changed during, and restored after, the execution of the syscall. With the advent of new y2038 syscalls in the subsequent patches, we add two more new versions of the syscalls (for pselect, ppoll, and io_pgetevents) in addition to the existing native and compat versions. Adding such an api reduces the logic that would need to be replicated otherwise. Note that the calls to sigprocmask() ignored the return value from the api as the function only returns an error on an invalid first argument that is hardcoded at these call sites. The updated logic uses set_current_blocked() instead. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-09-20 04:41:04 +00:00
{
signal: simplify set_user_sigmask/restore_user_sigmask task->saved_sigmask and ->restore_sigmask are only used in the ret-from- syscall paths. This means that set_user_sigmask() can save ->blocked in ->saved_sigmask and do set_restore_sigmask() to indicate that ->blocked was modified. This way the callers do not need 2 sigset_t's passed to set/restore and restore_user_sigmask() renamed to restore_saved_sigmask_unless() turns into the trivial helper which just calls restore_saved_sigmask(). Link: http://lkml.kernel.org/r/20190606113206.GA9464@redhat.com Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Deepa Dinamani <deepa.kernel@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Eric Wong <e@80x24.org> Cc: Jason Baron <jbaron@akamai.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: David Laight <David.Laight@aculab.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16 23:29:53 +00:00
sigset_t kmask;
signal: Add set_user_sigmask() Refactor reading sigset from userspace and updating sigmask into an api. This is useful for versions of syscalls that pass in the sigmask and expect the current->sigmask to be changed during, and restored after, the execution of the syscall. With the advent of new y2038 syscalls in the subsequent patches, we add two more new versions of the syscalls (for pselect, ppoll, and io_pgetevents) in addition to the existing native and compat versions. Adding such an api reduces the logic that would need to be replicated otherwise. Note that the calls to sigprocmask() ignored the return value from the api as the function only returns an error on an invalid first argument that is hardcoded at these call sites. The updated logic uses set_current_blocked() instead. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-09-20 04:41:04 +00:00
signal: simplify set_user_sigmask/restore_user_sigmask task->saved_sigmask and ->restore_sigmask are only used in the ret-from- syscall paths. This means that set_user_sigmask() can save ->blocked in ->saved_sigmask and do set_restore_sigmask() to indicate that ->blocked was modified. This way the callers do not need 2 sigset_t's passed to set/restore and restore_user_sigmask() renamed to restore_saved_sigmask_unless() turns into the trivial helper which just calls restore_saved_sigmask(). Link: http://lkml.kernel.org/r/20190606113206.GA9464@redhat.com Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Deepa Dinamani <deepa.kernel@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Eric Wong <e@80x24.org> Cc: Jason Baron <jbaron@akamai.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: David Laight <David.Laight@aculab.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16 23:29:53 +00:00
if (!umask)
return 0;
signal: Add set_user_sigmask() Refactor reading sigset from userspace and updating sigmask into an api. This is useful for versions of syscalls that pass in the sigmask and expect the current->sigmask to be changed during, and restored after, the execution of the syscall. With the advent of new y2038 syscalls in the subsequent patches, we add two more new versions of the syscalls (for pselect, ppoll, and io_pgetevents) in addition to the existing native and compat versions. Adding such an api reduces the logic that would need to be replicated otherwise. Note that the calls to sigprocmask() ignored the return value from the api as the function only returns an error on an invalid first argument that is hardcoded at these call sites. The updated logic uses set_current_blocked() instead. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-09-20 04:41:04 +00:00
if (sigsetsize != sizeof(sigset_t))
return -EINVAL;
signal: simplify set_user_sigmask/restore_user_sigmask task->saved_sigmask and ->restore_sigmask are only used in the ret-from- syscall paths. This means that set_user_sigmask() can save ->blocked in ->saved_sigmask and do set_restore_sigmask() to indicate that ->blocked was modified. This way the callers do not need 2 sigset_t's passed to set/restore and restore_user_sigmask() renamed to restore_saved_sigmask_unless() turns into the trivial helper which just calls restore_saved_sigmask(). Link: http://lkml.kernel.org/r/20190606113206.GA9464@redhat.com Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Deepa Dinamani <deepa.kernel@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Eric Wong <e@80x24.org> Cc: Jason Baron <jbaron@akamai.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: David Laight <David.Laight@aculab.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16 23:29:53 +00:00
if (copy_from_user(&kmask, umask, sizeof(sigset_t)))
signal: Add set_user_sigmask() Refactor reading sigset from userspace and updating sigmask into an api. This is useful for versions of syscalls that pass in the sigmask and expect the current->sigmask to be changed during, and restored after, the execution of the syscall. With the advent of new y2038 syscalls in the subsequent patches, we add two more new versions of the syscalls (for pselect, ppoll, and io_pgetevents) in addition to the existing native and compat versions. Adding such an api reduces the logic that would need to be replicated otherwise. Note that the calls to sigprocmask() ignored the return value from the api as the function only returns an error on an invalid first argument that is hardcoded at these call sites. The updated logic uses set_current_blocked() instead. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-09-20 04:41:04 +00:00
return -EFAULT;
signal: simplify set_user_sigmask/restore_user_sigmask task->saved_sigmask and ->restore_sigmask are only used in the ret-from- syscall paths. This means that set_user_sigmask() can save ->blocked in ->saved_sigmask and do set_restore_sigmask() to indicate that ->blocked was modified. This way the callers do not need 2 sigset_t's passed to set/restore and restore_user_sigmask() renamed to restore_saved_sigmask_unless() turns into the trivial helper which just calls restore_saved_sigmask(). Link: http://lkml.kernel.org/r/20190606113206.GA9464@redhat.com Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Deepa Dinamani <deepa.kernel@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Eric Wong <e@80x24.org> Cc: Jason Baron <jbaron@akamai.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: David Laight <David.Laight@aculab.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16 23:29:53 +00:00
set_restore_sigmask();
current->saved_sigmask = current->blocked;
set_current_blocked(&kmask);
signal: Add set_user_sigmask() Refactor reading sigset from userspace and updating sigmask into an api. This is useful for versions of syscalls that pass in the sigmask and expect the current->sigmask to be changed during, and restored after, the execution of the syscall. With the advent of new y2038 syscalls in the subsequent patches, we add two more new versions of the syscalls (for pselect, ppoll, and io_pgetevents) in addition to the existing native and compat versions. Adding such an api reduces the logic that would need to be replicated otherwise. Note that the calls to sigprocmask() ignored the return value from the api as the function only returns an error on an invalid first argument that is hardcoded at these call sites. The updated logic uses set_current_blocked() instead. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-09-20 04:41:04 +00:00
return 0;
}
#ifdef CONFIG_COMPAT
signal: simplify set_user_sigmask/restore_user_sigmask task->saved_sigmask and ->restore_sigmask are only used in the ret-from- syscall paths. This means that set_user_sigmask() can save ->blocked in ->saved_sigmask and do set_restore_sigmask() to indicate that ->blocked was modified. This way the callers do not need 2 sigset_t's passed to set/restore and restore_user_sigmask() renamed to restore_saved_sigmask_unless() turns into the trivial helper which just calls restore_saved_sigmask(). Link: http://lkml.kernel.org/r/20190606113206.GA9464@redhat.com Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Deepa Dinamani <deepa.kernel@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Eric Wong <e@80x24.org> Cc: Jason Baron <jbaron@akamai.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: David Laight <David.Laight@aculab.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16 23:29:53 +00:00
int set_compat_user_sigmask(const compat_sigset_t __user *umask,
signal: Add set_user_sigmask() Refactor reading sigset from userspace and updating sigmask into an api. This is useful for versions of syscalls that pass in the sigmask and expect the current->sigmask to be changed during, and restored after, the execution of the syscall. With the advent of new y2038 syscalls in the subsequent patches, we add two more new versions of the syscalls (for pselect, ppoll, and io_pgetevents) in addition to the existing native and compat versions. Adding such an api reduces the logic that would need to be replicated otherwise. Note that the calls to sigprocmask() ignored the return value from the api as the function only returns an error on an invalid first argument that is hardcoded at these call sites. The updated logic uses set_current_blocked() instead. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-09-20 04:41:04 +00:00
size_t sigsetsize)
{
signal: simplify set_user_sigmask/restore_user_sigmask task->saved_sigmask and ->restore_sigmask are only used in the ret-from- syscall paths. This means that set_user_sigmask() can save ->blocked in ->saved_sigmask and do set_restore_sigmask() to indicate that ->blocked was modified. This way the callers do not need 2 sigset_t's passed to set/restore and restore_user_sigmask() renamed to restore_saved_sigmask_unless() turns into the trivial helper which just calls restore_saved_sigmask(). Link: http://lkml.kernel.org/r/20190606113206.GA9464@redhat.com Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Deepa Dinamani <deepa.kernel@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Eric Wong <e@80x24.org> Cc: Jason Baron <jbaron@akamai.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: David Laight <David.Laight@aculab.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16 23:29:53 +00:00
sigset_t kmask;
signal: Add set_user_sigmask() Refactor reading sigset from userspace and updating sigmask into an api. This is useful for versions of syscalls that pass in the sigmask and expect the current->sigmask to be changed during, and restored after, the execution of the syscall. With the advent of new y2038 syscalls in the subsequent patches, we add two more new versions of the syscalls (for pselect, ppoll, and io_pgetevents) in addition to the existing native and compat versions. Adding such an api reduces the logic that would need to be replicated otherwise. Note that the calls to sigprocmask() ignored the return value from the api as the function only returns an error on an invalid first argument that is hardcoded at these call sites. The updated logic uses set_current_blocked() instead. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-09-20 04:41:04 +00:00
signal: simplify set_user_sigmask/restore_user_sigmask task->saved_sigmask and ->restore_sigmask are only used in the ret-from- syscall paths. This means that set_user_sigmask() can save ->blocked in ->saved_sigmask and do set_restore_sigmask() to indicate that ->blocked was modified. This way the callers do not need 2 sigset_t's passed to set/restore and restore_user_sigmask() renamed to restore_saved_sigmask_unless() turns into the trivial helper which just calls restore_saved_sigmask(). Link: http://lkml.kernel.org/r/20190606113206.GA9464@redhat.com Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Deepa Dinamani <deepa.kernel@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Eric Wong <e@80x24.org> Cc: Jason Baron <jbaron@akamai.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: David Laight <David.Laight@aculab.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16 23:29:53 +00:00
if (!umask)
return 0;
signal: Add set_user_sigmask() Refactor reading sigset from userspace and updating sigmask into an api. This is useful for versions of syscalls that pass in the sigmask and expect the current->sigmask to be changed during, and restored after, the execution of the syscall. With the advent of new y2038 syscalls in the subsequent patches, we add two more new versions of the syscalls (for pselect, ppoll, and io_pgetevents) in addition to the existing native and compat versions. Adding such an api reduces the logic that would need to be replicated otherwise. Note that the calls to sigprocmask() ignored the return value from the api as the function only returns an error on an invalid first argument that is hardcoded at these call sites. The updated logic uses set_current_blocked() instead. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-09-20 04:41:04 +00:00
if (sigsetsize != sizeof(compat_sigset_t))
return -EINVAL;
signal: simplify set_user_sigmask/restore_user_sigmask task->saved_sigmask and ->restore_sigmask are only used in the ret-from- syscall paths. This means that set_user_sigmask() can save ->blocked in ->saved_sigmask and do set_restore_sigmask() to indicate that ->blocked was modified. This way the callers do not need 2 sigset_t's passed to set/restore and restore_user_sigmask() renamed to restore_saved_sigmask_unless() turns into the trivial helper which just calls restore_saved_sigmask(). Link: http://lkml.kernel.org/r/20190606113206.GA9464@redhat.com Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Deepa Dinamani <deepa.kernel@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Eric Wong <e@80x24.org> Cc: Jason Baron <jbaron@akamai.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: David Laight <David.Laight@aculab.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16 23:29:53 +00:00
if (get_compat_sigset(&kmask, umask))
signal: Add set_user_sigmask() Refactor reading sigset from userspace and updating sigmask into an api. This is useful for versions of syscalls that pass in the sigmask and expect the current->sigmask to be changed during, and restored after, the execution of the syscall. With the advent of new y2038 syscalls in the subsequent patches, we add two more new versions of the syscalls (for pselect, ppoll, and io_pgetevents) in addition to the existing native and compat versions. Adding such an api reduces the logic that would need to be replicated otherwise. Note that the calls to sigprocmask() ignored the return value from the api as the function only returns an error on an invalid first argument that is hardcoded at these call sites. The updated logic uses set_current_blocked() instead. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-09-20 04:41:04 +00:00
return -EFAULT;
signal: simplify set_user_sigmask/restore_user_sigmask task->saved_sigmask and ->restore_sigmask are only used in the ret-from- syscall paths. This means that set_user_sigmask() can save ->blocked in ->saved_sigmask and do set_restore_sigmask() to indicate that ->blocked was modified. This way the callers do not need 2 sigset_t's passed to set/restore and restore_user_sigmask() renamed to restore_saved_sigmask_unless() turns into the trivial helper which just calls restore_saved_sigmask(). Link: http://lkml.kernel.org/r/20190606113206.GA9464@redhat.com Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Deepa Dinamani <deepa.kernel@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Eric Wong <e@80x24.org> Cc: Jason Baron <jbaron@akamai.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: David Laight <David.Laight@aculab.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16 23:29:53 +00:00
set_restore_sigmask();
current->saved_sigmask = current->blocked;
set_current_blocked(&kmask);
signal: Add set_user_sigmask() Refactor reading sigset from userspace and updating sigmask into an api. This is useful for versions of syscalls that pass in the sigmask and expect the current->sigmask to be changed during, and restored after, the execution of the syscall. With the advent of new y2038 syscalls in the subsequent patches, we add two more new versions of the syscalls (for pselect, ppoll, and io_pgetevents) in addition to the existing native and compat versions. Adding such an api reduces the logic that would need to be replicated otherwise. Note that the calls to sigprocmask() ignored the return value from the api as the function only returns an error on an invalid first argument that is hardcoded at these call sites. The updated logic uses set_current_blocked() instead. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-09-20 04:41:04 +00:00
return 0;
}
#endif
kernel/signal.c: add kernel-doc notation to syscalls Add kernel-doc to syscalls in signal.c. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-04 22:00:26 +00:00
/**
* sys_rt_sigprocmask - change the list of currently blocked signals
* @how: whether to add, remove, or set signals
signal.c: fix kernel-doc notation Fix kernel-doc warnings in signal.c: Warning(kernel/signal.c:2374): No description found for parameter 'nset' Warning(kernel/signal.c:2374): Excess function parameter 'set' description in 'sys_rt_sigprocmask' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-14 22:50:11 +00:00
* @nset: stores pending signals
kernel/signal.c: add kernel-doc notation to syscalls Add kernel-doc to syscalls in signal.c. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-04 22:00:26 +00:00
* @oset: previous value of signal mask if non-null
* @sigsetsize: size of sigset_t type
*/
signal: cleanup sys_rt_sigprocmask() sys_rt_sigprocmask() looks unnecessarily complicated, simplify it. We can just read current->blocked lockless unconditionally before anything else and then copy-to-user it if needed. At worst we copy 4 words on mips. We could copy-to-user the old mask first and simplify the code even more, but the patch tries to keep the current behaviour: we change current->block even if copy_to_user(oset) fails. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-04-27 19:18:10 +00:00
SYSCALL_DEFINE4(rt_sigprocmask, int, how, sigset_t __user *, nset,
[CVE-2009-0029] System call wrappers part 08 Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 13:14:10 +00:00
sigset_t __user *, oset, size_t, sigsetsize)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
sigset_t old_set, new_set;
signal: cleanup sys_rt_sigprocmask() sys_rt_sigprocmask() looks unnecessarily complicated, simplify it. We can just read current->blocked lockless unconditionally before anything else and then copy-to-user it if needed. At worst we copy 4 words on mips. We could copy-to-user the old mask first and simplify the code even more, but the patch tries to keep the current behaviour: we change current->block even if copy_to_user(oset) fails. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-04-27 19:18:10 +00:00
int error;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* XXX: Don't preclude handling different sized sigset_t's. */
if (sigsetsize != sizeof(sigset_t))
signal: cleanup sys_rt_sigprocmask() sys_rt_sigprocmask() looks unnecessarily complicated, simplify it. We can just read current->blocked lockless unconditionally before anything else and then copy-to-user it if needed. At worst we copy 4 words on mips. We could copy-to-user the old mask first and simplify the code even more, but the patch tries to keep the current behaviour: we change current->block even if copy_to_user(oset) fails. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-04-27 19:18:10 +00:00
return -EINVAL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
signal: cleanup sys_rt_sigprocmask() sys_rt_sigprocmask() looks unnecessarily complicated, simplify it. We can just read current->blocked lockless unconditionally before anything else and then copy-to-user it if needed. At worst we copy 4 words on mips. We could copy-to-user the old mask first and simplify the code even more, but the patch tries to keep the current behaviour: we change current->block even if copy_to_user(oset) fails. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-04-27 19:18:10 +00:00
old_set = current->blocked;
if (nset) {
if (copy_from_user(&new_set, nset, sizeof(sigset_t)))
return -EFAULT;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
sigdelsetmask(&new_set, sigmask(SIGKILL)|sigmask(SIGSTOP));
signal: cleanup sys_rt_sigprocmask() sys_rt_sigprocmask() looks unnecessarily complicated, simplify it. We can just read current->blocked lockless unconditionally before anything else and then copy-to-user it if needed. At worst we copy 4 words on mips. We could copy-to-user the old mask first and simplify the code even more, but the patch tries to keep the current behaviour: we change current->block even if copy_to_user(oset) fails. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-04-27 19:18:10 +00:00
error = sigprocmask(how, &new_set, NULL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (error)
signal: cleanup sys_rt_sigprocmask() sys_rt_sigprocmask() looks unnecessarily complicated, simplify it. We can just read current->blocked lockless unconditionally before anything else and then copy-to-user it if needed. At worst we copy 4 words on mips. We could copy-to-user the old mask first and simplify the code even more, but the patch tries to keep the current behaviour: we change current->block even if copy_to_user(oset) fails. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-04-27 19:18:10 +00:00
return error;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
signal: cleanup sys_rt_sigprocmask() sys_rt_sigprocmask() looks unnecessarily complicated, simplify it. We can just read current->blocked lockless unconditionally before anything else and then copy-to-user it if needed. At worst we copy 4 words on mips. We could copy-to-user the old mask first and simplify the code even more, but the patch tries to keep the current behaviour: we change current->block even if copy_to_user(oset) fails. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-04-27 19:18:10 +00:00
if (oset) {
if (copy_to_user(oset, &old_set, sizeof(sigset_t)))
return -EFAULT;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
signal: cleanup sys_rt_sigprocmask() sys_rt_sigprocmask() looks unnecessarily complicated, simplify it. We can just read current->blocked lockless unconditionally before anything else and then copy-to-user it if needed. At worst we copy 4 words on mips. We could copy-to-user the old mask first and simplify the code even more, but the patch tries to keep the current behaviour: we change current->block even if copy_to_user(oset) fails. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-04-27 19:18:10 +00:00
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
generic compat_sys_rt_sigprocmask() conditional on GENERIC_COMPAT_RT_SIGPROCMASK; by the end of that series it will become the same thing as COMPAT and conditional will die out. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-25 18:32:58 +00:00
#ifdef CONFIG_COMPAT
COMPAT_SYSCALL_DEFINE4(rt_sigprocmask, int, how, compat_sigset_t __user *, nset,
compat_sigset_t __user *, oset, compat_size_t, sigsetsize)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
generic compat_sys_rt_sigprocmask() conditional on GENERIC_COMPAT_RT_SIGPROCMASK; by the end of that series it will become the same thing as COMPAT and conditional will die out. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-25 18:32:58 +00:00
sigset_t old_set = current->blocked;
/* XXX: Don't preclude handling different sized sigset_t's. */
if (sigsetsize != sizeof(sigset_t))
return -EINVAL;
if (nset) {
sigset_t new_set;
int error;
get_compat_sigset() similar to put_compat_sigset() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-09-04 01:45:17 +00:00
if (get_compat_sigset(&new_set, nset))
generic compat_sys_rt_sigprocmask() conditional on GENERIC_COMPAT_RT_SIGPROCMASK; by the end of that series it will become the same thing as COMPAT and conditional will die out. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-25 18:32:58 +00:00
return -EFAULT;
sigdelsetmask(&new_set, sigmask(SIGKILL)|sigmask(SIGSTOP));
error = sigprocmask(how, &new_set, NULL);
if (error)
return error;
}
signal: replace sigset_to_compat() with put_compat_sigset() There are 4 callers of sigset_to_compat() in the entire kernel. One is in sparc compat rt_sigaction(2), the rest are in kernel/signal.c itself. All are followed by copy_to_user(), and all but the sparc one are under "if it's big-endian..." ifdefs. Let's transform sigset_to_compat() into put_compat_sigset() that also calls copy_to_user(). Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-08-21 23:16:11 +00:00
return oset ? put_compat_sigset(oset, &old_set, sizeof(*oset)) : 0;
generic compat_sys_rt_sigprocmask() conditional on GENERIC_COMPAT_RT_SIGPROCMASK; by the end of that series it will become the same thing as COMPAT and conditional will die out. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-25 18:32:58 +00:00
}
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
signal: make do_sigpending() void do_sigpending() returned 0 unconditionally so it doesn't make sense to have it return at all. This allows us to simplify a bunch of syscall callers. Link: http://lkml.kernel.org/r/20180602103653.18181-5-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Morris <james.morris@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 05:00:02 +00:00
static void do_sigpending(sigset_t *set)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
spin_lock_irq(&current->sighand->siglock);
generic compat_sys_rt_sigpending() conditional on GENERIC_COMPAT_RT_SIGPENDING; by the end of that series it will become the same thing as COMPAT and conditional will die out. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-25 19:31:38 +00:00
sigorsets(set, &current->pending.signal,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
&current->signal->shared_pending.signal);
spin_unlock_irq(&current->sighand->siglock);
/* Outside the lock because only this thread touches it. */
generic compat_sys_rt_sigpending() conditional on GENERIC_COMPAT_RT_SIGPENDING; by the end of that series it will become the same thing as COMPAT and conditional will die out. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-25 19:31:38 +00:00
sigandsets(set, &current->blocked, set);
kernel/signal.c: fix typos and coding style General coding style and comment fixes; no code changes: - Use multi-line-comment coding style. - Put some function signatures completely on one line. - Hyphenate some words. - Spell Posix as POSIX. - Correct typos & spellos in some comments. - Drop trailing whitespace. - End sentences with periods. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-04 21:59:31 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
kernel/signal.c: add kernel-doc notation to syscalls Add kernel-doc to syscalls in signal.c. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-04 22:00:26 +00:00
/**
* sys_rt_sigpending - examine a pending signal that has been raised
* while blocked
signals: fix new kernel-doc warnings Fix new kernel-doc warnings in kernel/signal.c: Warning(kernel/signal.c:2689): No description found for parameter 'uset' Warning(kernel/signal.c:2689): Excess function parameter 'set' description in 'sys_rt_sigpending' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-04 22:32:59 +00:00
* @uset: stores pending signals
kernel/signal.c: add kernel-doc notation to syscalls Add kernel-doc to syscalls in signal.c. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-04 22:00:26 +00:00
* @sigsetsize: size of sigset_t type or larger
*/
generic compat_sys_rt_sigpending() conditional on GENERIC_COMPAT_RT_SIGPENDING; by the end of that series it will become the same thing as COMPAT and conditional will die out. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-25 19:31:38 +00:00
SYSCALL_DEFINE2(rt_sigpending, sigset_t __user *, uset, size_t, sigsetsize)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
generic compat_sys_rt_sigpending() conditional on GENERIC_COMPAT_RT_SIGPENDING; by the end of that series it will become the same thing as COMPAT and conditional will die out. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-25 19:31:38 +00:00
sigset_t set;
signal: lift sigset size check out of do_sigpending() As sigsetsize argument of do_sigpending() is not used anywhere else in that function after the check, remove this argument and move the check out of do_sigpending() into rt_sigpending() and its compat analog. Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-08-21 23:16:43 +00:00
if (sigsetsize > sizeof(*uset))
return -EINVAL;
signal: make do_sigpending() void do_sigpending() returned 0 unconditionally so it doesn't make sense to have it return at all. This allows us to simplify a bunch of syscall callers. Link: http://lkml.kernel.org/r/20180602103653.18181-5-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Morris <james.morris@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 05:00:02 +00:00
do_sigpending(&set);
if (copy_to_user(uset, &set, sigsetsize))
return -EFAULT;
return 0;
generic compat_sys_rt_sigpending() conditional on GENERIC_COMPAT_RT_SIGPENDING; by the end of that series it will become the same thing as COMPAT and conditional will die out. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-25 19:31:38 +00:00
}
#ifdef CONFIG_COMPAT
COMPAT_SYSCALL_DEFINE2(rt_sigpending, compat_sigset_t __user *, uset,
compat_size_t, sigsetsize)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
generic compat_sys_rt_sigpending() conditional on GENERIC_COMPAT_RT_SIGPENDING; by the end of that series it will become the same thing as COMPAT and conditional will die out. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-25 19:31:38 +00:00
sigset_t set;
signal: lift sigset size check out of do_sigpending() As sigsetsize argument of do_sigpending() is not used anywhere else in that function after the check, remove this argument and move the check out of do_sigpending() into rt_sigpending() and its compat analog. Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-08-21 23:16:43 +00:00
if (sigsetsize > sizeof(*uset))
return -EINVAL;
signal: make do_sigpending() void do_sigpending() returned 0 unconditionally so it doesn't make sense to have it return at all. This allows us to simplify a bunch of syscall callers. Link: http://lkml.kernel.org/r/20180602103653.18181-5-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Morris <james.morris@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 05:00:02 +00:00
do_sigpending(&set);
return put_compat_sigset(uset, &set, sigsetsize);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
generic compat_sys_rt_sigpending() conditional on GENERIC_COMPAT_RT_SIGPENDING; by the end of that series it will become the same thing as COMPAT and conditional will die out. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-25 19:31:38 +00:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
signal: Use a smaller struct siginfo in the kernel We reserve 128 bytes for struct siginfo but only use about 48 bytes on 64bit and 32 bytes on 32bit. Someday we might use more but it is unlikely to be anytime soon. Userspace seems content with just enough bytes of siginfo to implement sigqueue. Or in the case of checkpoint/restart reinjecting signals the kernel has sent. Reducing the stack footprint and the work to copy siginfo around from 2 cachelines to 1 cachelines seems worth doing even if I don't have benchmarks to show a performance difference. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 10:59:31 +00:00
static const struct {
unsigned char limit, layout;
} sig_sicodes[] = {
[SIGILL] = { NSIGILL, SIL_FAULT },
[SIGFPE] = { NSIGFPE, SIL_FAULT },
[SIGSEGV] = { NSIGSEGV, SIL_FAULT },
[SIGBUS] = { NSIGBUS, SIL_FAULT },
[SIGTRAP] = { NSIGTRAP, SIL_FAULT },
#if defined(SIGEMT)
[SIGEMT] = { NSIGEMT, SIL_FAULT },
#endif
[SIGCHLD] = { NSIGCHLD, SIL_CHLD },
[SIGPOLL] = { NSIGPOLL, SIL_POLL },
[SIGSYS] = { NSIGSYS, SIL_SYS },
};
signal: Guard against negative signal numbers in copy_siginfo_from_user The bounds checks in known_siginfo_layout only guards against positive numbers that are too large, large negative can slip through and can cause out of bounds accesses. Ordinarily this is not a concern because early in signal processing the signal number is filtered with valid_signal which ensures it is a small positive signal number, but copy_siginfo_from_user is called before this check is performed. [ 73.031126] BUG: unable to handle kernel paging request at ffffffff6281bcb6 [ 73.032038] PGD 3014067 P4D 3014067 PUD 0 [ 73.032565] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [ 73.033287] CPU: 0 PID: 732 Comm: trinity-c3 Tainted: G W T 4.19.0-rc1-00077-g4ce5f9c #1 [ 73.034423] RIP: 0010:copy_siginfo_from_user+0x4d/0xd0 [ 73.034908] Code: 00 8b 53 08 81 fa 80 00 00 00 0f 84 90 00 00 00 85 d2 7e 2d 48 63 0b 83 f9 1f 7f 1c 8d 71 ff bf d8 04 01 50 48 0f a3 f7 73 0e <0f> b6 8c 09 20 bb 81 82 39 ca 7f 15 eb 68 31 c0 83 fa 06 7f 0c eb [ 73.036665] RSP: 0018:ffff88001b8f7e20 EFLAGS: 00010297 [ 73.037160] RAX: 0000000000000000 RBX: ffff88001b8f7e90 RCX: fffffffff00000cb [ 73.037865] RDX: 0000000000000001 RSI: 00000000f00000ca RDI: 00000000500104d8 [ 73.038546] RBP: ffff88001b8f7e80 R08: 0000000000000000 R09: 0000000000000000 [ 73.039201] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000008 [ 73.039874] R13: 00000000000002dc R14: 0000000000000000 R15: 0000000000000000 [ 73.040613] FS: 000000000104a880(0000) GS:ffff88001f000000(0000) knlGS:0000000000000000 [ 73.041649] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 73.042405] CR2: ffffffff6281bcb6 CR3: 000000001cb52003 CR4: 00000000001606b0 [ 73.043351] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 73.044286] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 [ 73.045221] Call Trace: [ 73.045556] __x64_sys_rt_tgsigqueueinfo+0x34/0xa0 [ 73.046199] do_syscall_64+0x1a4/0x390 [ 73.046708] ? vtime_user_enter+0x61/0x80 [ 73.047242] ? __context_tracking_enter+0x4e/0x60 [ 73.047714] ? __context_tracking_enter+0x4e/0x60 [ 73.048278] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Therefore fix known_siginfo_layout to take an unsigned signal number instead of a signed signal number. All valid signal numbers are small positive numbers so they will not be affected, but invalid negative signal numbers will now become large positive signal numbers and will not be used as indices into the sig_sicodes array. Making the signal number unsigned makes it difficult for similar mistakes to happen in the future. Fixes: 4ce5f9c9e754 ("signal: Use a smaller struct siginfo in the kernel") Inspired-by: Sean Christopherson <sean.j.christopherson@intel.com> Reported-by: kernel test robot <rong.a.chen@intel.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-10-11 01:11:25 +00:00
static bool known_siginfo_layout(unsigned sig, int si_code)
signal: Use a smaller struct siginfo in the kernel We reserve 128 bytes for struct siginfo but only use about 48 bytes on 64bit and 32 bytes on 32bit. Someday we might use more but it is unlikely to be anytime soon. Userspace seems content with just enough bytes of siginfo to implement sigqueue. Or in the case of checkpoint/restart reinjecting signals the kernel has sent. Reducing the stack footprint and the work to copy siginfo around from 2 cachelines to 1 cachelines seems worth doing even if I don't have benchmarks to show a performance difference. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 10:59:31 +00:00
{
if (si_code == SI_KERNEL)
return true;
else if ((si_code > SI_USER)) {
if (sig_specific_sicodes(sig)) {
if (si_code <= sig_sicodes[sig].limit)
return true;
}
else if (si_code <= NSIGPOLL)
return true;
}
else if (si_code >= SI_DETHREAD)
return true;
else if (si_code == SI_ASYNCNL)
return true;
return false;
}
signal: Guard against negative signal numbers in copy_siginfo_from_user32 While fixing an out of bounds array access in known_siginfo_layout reported by the kernel test robot it became apparent that the same bug exists in siginfo_layout and affects copy_siginfo_from_user32. The straight forward fix that makes guards against making this mistake in the future and should keep the code size small is to just take an unsigned signal number instead of a signed signal number, as I did to fix known_siginfo_layout. Cc: stable@vger.kernel.org Fixes: cc731525f26a ("signal: Remove kernel interal si_code magic") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-10-11 01:29:44 +00:00
enum siginfo_layout siginfo_layout(unsigned sig, int si_code)
signal: Remove kernel interal si_code magic struct siginfo is a union and the kernel since 2.4 has been hiding a union tag in the high 16bits of si_code using the values: __SI_KILL __SI_TIMER __SI_POLL __SI_FAULT __SI_CHLD __SI_RT __SI_MESGQ __SI_SYS While this looks plausible on the surface, in practice this situation has not worked well. - Injected positive signals are not copied to user space properly unless they have these magic high bits set. - Injected positive signals are not reported properly by signalfd unless they have these magic high bits set. - These kernel internal values leaked to userspace via ptrace_peek_siginfo - It was possible to inject these kernel internal values and cause the the kernel to misbehave. - Kernel developers got confused and expected these kernel internal values in userspace in kernel self tests. - Kernel developers got confused and set si_code to __SI_FAULT which is SI_USER in userspace which causes userspace to think an ordinary user sent the signal and that it was not kernel generated. - The values make it impossible to reorganize the code to transform siginfo_copy_to_user into a plain copy_to_user. As si_code must be massaged before being passed to userspace. So remove these kernel internal si codes and make the kernel code simpler and more maintainable. To replace these kernel internal magic si_codes introduce the helper function siginfo_layout, that takes a signal number and an si_code and computes which union member of siginfo is being used. Have siginfo_layout return an enumeration so that gcc will have enough information to warn if a switch statement does not handle all of union members. A couple of architectures have a messed up ABI that defines signal specific duplications of SI_USER which causes more special cases in siginfo_layout than I would like. The good news is only problem architectures pay the cost. Update all of the code that used the previous magic __SI_ values to use the new SIL_ values and to call siginfo_layout to get those values. Escept where not all of the cases are handled remove the defaults in the switch statements so that if a new case is missed in the future the lack will show up at compile time. Modify the code that copies siginfo si_code to userspace to just copy the value and not cast si_code to a short first. The high bits are no longer used to hold a magic union member. Fixup the siginfo header files to stop including the __SI_ values in their constants and for the headers that were missing it to properly update the number of si_codes for each signal type. The fixes to copy_siginfo_from_user32 implementations has the interesting property that several of them perviously should never have worked as the __SI_ values they depended up where kernel internal. With that dependency gone those implementations should work much better. The idea of not passing the __SI_ values out to userspace and then not reinserting them has been tested with criu and criu worked without changes. Ref: 2.4.0-test1 Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-17 03:36:59 +00:00
{
enum siginfo_layout layout = SIL_KILL;
if ((si_code > SI_USER) && (si_code < SI_KERNEL)) {
signal: Use a smaller struct siginfo in the kernel We reserve 128 bytes for struct siginfo but only use about 48 bytes on 64bit and 32 bytes on 32bit. Someday we might use more but it is unlikely to be anytime soon. Userspace seems content with just enough bytes of siginfo to implement sigqueue. Or in the case of checkpoint/restart reinjecting signals the kernel has sent. Reducing the stack footprint and the work to copy siginfo around from 2 cachelines to 1 cachelines seems worth doing even if I don't have benchmarks to show a performance difference. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 10:59:31 +00:00
if ((sig < ARRAY_SIZE(sig_sicodes)) &&
(si_code <= sig_sicodes[sig].limit)) {
layout = sig_sicodes[sig].layout;
signal: Extend siginfo_layout with SIL_FAULT_{MCEERR|BNDERR|PKUERR} Update the siginfo_layout function and enum siginfo_layout to represent all of the possible field layouts of struct siginfo. This allows the uses of siginfo_layout in um and arm64 where they are testing for SIL_FAULT to be more accurate as this rules out the other cases. Further this allows the switch statements on siginfo_layout to be simpler if perhaps a little more wordy. Making it easier to understand what is actually going on. As SIL_FAULT_BNDERR and SIL_FAULT_PKUERR are never expected to appear in signalfd just treat them as SIL_FAULT. To include them would take 20 extra bytes an pretty much fill up what is left of signalfd_siginfo. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-04-25 01:59:47 +00:00
/* Handle the exceptions */
if ((sig == SIGBUS) &&
(si_code >= BUS_MCEERR_AR) && (si_code <= BUS_MCEERR_AO))
layout = SIL_FAULT_MCEERR;
else if ((sig == SIGSEGV) && (si_code == SEGV_BNDERR))
layout = SIL_FAULT_BNDERR;
#ifdef SEGV_PKUERR
else if ((sig == SIGSEGV) && (si_code == SEGV_PKUERR))
layout = SIL_FAULT_PKUERR;
#endif
}
signal: Remove kernel interal si_code magic struct siginfo is a union and the kernel since 2.4 has been hiding a union tag in the high 16bits of si_code using the values: __SI_KILL __SI_TIMER __SI_POLL __SI_FAULT __SI_CHLD __SI_RT __SI_MESGQ __SI_SYS While this looks plausible on the surface, in practice this situation has not worked well. - Injected positive signals are not copied to user space properly unless they have these magic high bits set. - Injected positive signals are not reported properly by signalfd unless they have these magic high bits set. - These kernel internal values leaked to userspace via ptrace_peek_siginfo - It was possible to inject these kernel internal values and cause the the kernel to misbehave. - Kernel developers got confused and expected these kernel internal values in userspace in kernel self tests. - Kernel developers got confused and set si_code to __SI_FAULT which is SI_USER in userspace which causes userspace to think an ordinary user sent the signal and that it was not kernel generated. - The values make it impossible to reorganize the code to transform siginfo_copy_to_user into a plain copy_to_user. As si_code must be massaged before being passed to userspace. So remove these kernel internal si codes and make the kernel code simpler and more maintainable. To replace these kernel internal magic si_codes introduce the helper function siginfo_layout, that takes a signal number and an si_code and computes which union member of siginfo is being used. Have siginfo_layout return an enumeration so that gcc will have enough information to warn if a switch statement does not handle all of union members. A couple of architectures have a messed up ABI that defines signal specific duplications of SI_USER which causes more special cases in siginfo_layout than I would like. The good news is only problem architectures pay the cost. Update all of the code that used the previous magic __SI_ values to use the new SIL_ values and to call siginfo_layout to get those values. Escept where not all of the cases are handled remove the defaults in the switch statements so that if a new case is missed in the future the lack will show up at compile time. Modify the code that copies siginfo si_code to userspace to just copy the value and not cast si_code to a short first. The high bits are no longer used to hold a magic union member. Fixup the siginfo header files to stop including the __SI_ values in their constants and for the headers that were missing it to properly update the number of si_codes for each signal type. The fixes to copy_siginfo_from_user32 implementations has the interesting property that several of them perviously should never have worked as the __SI_ values they depended up where kernel internal. With that dependency gone those implementations should work much better. The idea of not passing the __SI_ values out to userspace and then not reinserting them has been tested with criu and criu worked without changes. Ref: 2.4.0-test1 Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-17 03:36:59 +00:00
else if (si_code <= NSIGPOLL)
layout = SIL_POLL;
} else {
if (si_code == SI_TIMER)
layout = SIL_TIMER;
else if (si_code == SI_SIGIO)
layout = SIL_POLL;
else if (si_code < 0)
layout = SIL_RT;
}
return layout;
}
signal: Use a smaller struct siginfo in the kernel We reserve 128 bytes for struct siginfo but only use about 48 bytes on 64bit and 32 bytes on 32bit. Someday we might use more but it is unlikely to be anytime soon. Userspace seems content with just enough bytes of siginfo to implement sigqueue. Or in the case of checkpoint/restart reinjecting signals the kernel has sent. Reducing the stack footprint and the work to copy siginfo around from 2 cachelines to 1 cachelines seems worth doing even if I don't have benchmarks to show a performance difference. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 10:59:31 +00:00
static inline char __user *si_expansion(const siginfo_t __user *info)
{
return ((char __user *)info) + sizeof(struct kernel_siginfo);
}
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
int copy_siginfo_to_user(siginfo_t __user *to, const kernel_siginfo_t *from)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
signal: Use a smaller struct siginfo in the kernel We reserve 128 bytes for struct siginfo but only use about 48 bytes on 64bit and 32 bytes on 32bit. Someday we might use more but it is unlikely to be anytime soon. Userspace seems content with just enough bytes of siginfo to implement sigqueue. Or in the case of checkpoint/restart reinjecting signals the kernel has sent. Reducing the stack footprint and the work to copy siginfo around from 2 cachelines to 1 cachelines seems worth doing even if I don't have benchmarks to show a performance difference. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 10:59:31 +00:00
char __user *expansion = si_expansion(to);
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
if (copy_to_user(to, from , sizeof(struct kernel_siginfo)))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return -EFAULT;
signal: Use a smaller struct siginfo in the kernel We reserve 128 bytes for struct siginfo but only use about 48 bytes on 64bit and 32 bytes on 32bit. Someday we might use more but it is unlikely to be anytime soon. Userspace seems content with just enough bytes of siginfo to implement sigqueue. Or in the case of checkpoint/restart reinjecting signals the kernel has sent. Reducing the stack footprint and the work to copy siginfo around from 2 cachelines to 1 cachelines seems worth doing even if I don't have benchmarks to show a performance difference. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 10:59:31 +00:00
if (clear_user(expansion, SI_EXPANSION_SIZE))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return -EFAULT;
signal: Reduce copy_siginfo_to_user to just copy_to_user Now that every instance of struct siginfo is now initialized it is no longer necessary to copy struct siginfo piece by piece to userspace but instead the entire structure can be copied. As well as making the code simpler and more efficient this means that copy_sinfo_to_user no longer cares which union member of struct siginfo is in use. In practice this means that all 32bit architectures that define FPE_FIXME will handle properly send SI_USER when kill(SIGFPE) is sent. While still performing their historic architectural brokenness when 0 is used a floating pointer signal. This matches the current behavior of 64bit architectures that define FPE_FIXME who get lucky and an overloaded SI_USER has continuted to work through copy_siginfo_to_user because the 8 byte si_addr occupies the same bytes in struct siginfo as the 4 byte si_pid and the 4 byte si_uid. Problematic architectures still need to fix their ABI so that signalfd and 32bit compat code will work properly. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-04-14 18:03:25 +00:00
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
signal: In sigqueueinfo prefer sig not si_signo Andrei Vagin <avagin@gmail.com> reported: > Accoding to the man page, the user should not set si_signo, it has to be set > by kernel. > > $ man 2 rt_sigqueueinfo > > The uinfo argument specifies the data to accompany the signal. This > argument is a pointer to a structure of type siginfo_t, described in > sigaction(2) (and defined by including <sigaction.h>). The caller > should set the following fields in this structure: > > si_code > This must be one of the SI_* codes in the Linux kernel source > file include/asm-generic/siginfo.h, with the restriction that > the code must be negative (i.e., cannot be SI_USER, which is > used by the kernel to indicate a signal sent by kill(2)) and > cannot (since Linux 2.6.39) be SI_TKILL (which is used by the > kernel to indicate a signal sent using tgkill(2)). > > si_pid This should be set to a process ID, typically the process ID of > the sender. > > si_uid This should be set to a user ID, typically the real user ID of > the sender. > > si_value > This field contains the user data to accompany the signal. For > more information, see the description of the last (union sigval) > argument of sigqueue(3). > > Internally, the kernel sets the si_signo field to the value specified > in sig, so that the receiver of the signal can also obtain the signal > number via that field. > > On Tue, Sep 25, 2018 at 07:19:02PM +0200, Eric W. Biederman wrote: >> >> If there is some application that calls sigqueueinfo directly that has >> a problem with this added sanity check we can revisit this when we see >> what kind of crazy that application is doing. > > > I already know two "applications" ;) > > https://github.com/torvalds/linux/blob/master/tools/testing/selftests/ptrace/peeksiginfo.c > https://github.com/checkpoint-restore/criu/blob/master/test/zdtm/static/sigpending.c > > Disclaimer: I'm the author of both of them. Looking at the kernel code the historical behavior has alwasy been to prefer the signal number passed in by the kernel. So sigh. Implmenet __copy_siginfo_from_user and __copy_siginfo_from_user32 to take that signal number and prefer it. The user of ptrace will still use copy_siginfo_from_user and copy_siginfo_from_user32 as they do not and never have had a signal number there. Luckily this change has never made it farther than linux-next. Fixes: e75dc036c445 ("signal: Fail sigqueueinfo if si_signo != sig") Reported-by: Andrei Vagin <avagin@gmail.com> Tested-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-10-05 07:02:48 +00:00
static int post_copy_siginfo_from_user(kernel_siginfo_t *info,
const siginfo_t __user *from)
signal: Introduce copy_siginfo_from_user and use it's return value In preparation for using a smaller version of siginfo in the kernel introduce copy_siginfo_from_user and use it when siginfo is copied from userspace. Make the pattern for using copy_siginfo_from_user and copy_siginfo_from_user32 to capture the return value and return that value on error. This is a necessary prerequisite for using a smaller siginfo in the kernel than the kernel exports to userspace. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-04-18 22:30:19 +00:00
{
signal: In sigqueueinfo prefer sig not si_signo Andrei Vagin <avagin@gmail.com> reported: > Accoding to the man page, the user should not set si_signo, it has to be set > by kernel. > > $ man 2 rt_sigqueueinfo > > The uinfo argument specifies the data to accompany the signal. This > argument is a pointer to a structure of type siginfo_t, described in > sigaction(2) (and defined by including <sigaction.h>). The caller > should set the following fields in this structure: > > si_code > This must be one of the SI_* codes in the Linux kernel source > file include/asm-generic/siginfo.h, with the restriction that > the code must be negative (i.e., cannot be SI_USER, which is > used by the kernel to indicate a signal sent by kill(2)) and > cannot (since Linux 2.6.39) be SI_TKILL (which is used by the > kernel to indicate a signal sent using tgkill(2)). > > si_pid This should be set to a process ID, typically the process ID of > the sender. > > si_uid This should be set to a user ID, typically the real user ID of > the sender. > > si_value > This field contains the user data to accompany the signal. For > more information, see the description of the last (union sigval) > argument of sigqueue(3). > > Internally, the kernel sets the si_signo field to the value specified > in sig, so that the receiver of the signal can also obtain the signal > number via that field. > > On Tue, Sep 25, 2018 at 07:19:02PM +0200, Eric W. Biederman wrote: >> >> If there is some application that calls sigqueueinfo directly that has >> a problem with this added sanity check we can revisit this when we see >> what kind of crazy that application is doing. > > > I already know two "applications" ;) > > https://github.com/torvalds/linux/blob/master/tools/testing/selftests/ptrace/peeksiginfo.c > https://github.com/checkpoint-restore/criu/blob/master/test/zdtm/static/sigpending.c > > Disclaimer: I'm the author of both of them. Looking at the kernel code the historical behavior has alwasy been to prefer the signal number passed in by the kernel. So sigh. Implmenet __copy_siginfo_from_user and __copy_siginfo_from_user32 to take that signal number and prefer it. The user of ptrace will still use copy_siginfo_from_user and copy_siginfo_from_user32 as they do not and never have had a signal number there. Luckily this change has never made it farther than linux-next. Fixes: e75dc036c445 ("signal: Fail sigqueueinfo if si_signo != sig") Reported-by: Andrei Vagin <avagin@gmail.com> Tested-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-10-05 07:02:48 +00:00
if (unlikely(!known_siginfo_layout(info->si_signo, info->si_code))) {
signal: Use a smaller struct siginfo in the kernel We reserve 128 bytes for struct siginfo but only use about 48 bytes on 64bit and 32 bytes on 32bit. Someday we might use more but it is unlikely to be anytime soon. Userspace seems content with just enough bytes of siginfo to implement sigqueue. Or in the case of checkpoint/restart reinjecting signals the kernel has sent. Reducing the stack footprint and the work to copy siginfo around from 2 cachelines to 1 cachelines seems worth doing even if I don't have benchmarks to show a performance difference. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 10:59:31 +00:00
char __user *expansion = si_expansion(from);
char buf[SI_EXPANSION_SIZE];
int i;
/*
* An unknown si_code might need more than
* sizeof(struct kernel_siginfo) bytes. Verify all of the
* extra bytes are 0. This guarantees copy_siginfo_to_user
* will return this data to userspace exactly.
*/
if (copy_from_user(&buf, expansion, SI_EXPANSION_SIZE))
return -EFAULT;
for (i = 0; i < SI_EXPANSION_SIZE; i++) {
if (buf[i] != 0)
return -E2BIG;
}
}
signal: Introduce copy_siginfo_from_user and use it's return value In preparation for using a smaller version of siginfo in the kernel introduce copy_siginfo_from_user and use it when siginfo is copied from userspace. Make the pattern for using copy_siginfo_from_user and copy_siginfo_from_user32 to capture the return value and return that value on error. This is a necessary prerequisite for using a smaller siginfo in the kernel than the kernel exports to userspace. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-04-18 22:30:19 +00:00
return 0;
}
signal: In sigqueueinfo prefer sig not si_signo Andrei Vagin <avagin@gmail.com> reported: > Accoding to the man page, the user should not set si_signo, it has to be set > by kernel. > > $ man 2 rt_sigqueueinfo > > The uinfo argument specifies the data to accompany the signal. This > argument is a pointer to a structure of type siginfo_t, described in > sigaction(2) (and defined by including <sigaction.h>). The caller > should set the following fields in this structure: > > si_code > This must be one of the SI_* codes in the Linux kernel source > file include/asm-generic/siginfo.h, with the restriction that > the code must be negative (i.e., cannot be SI_USER, which is > used by the kernel to indicate a signal sent by kill(2)) and > cannot (since Linux 2.6.39) be SI_TKILL (which is used by the > kernel to indicate a signal sent using tgkill(2)). > > si_pid This should be set to a process ID, typically the process ID of > the sender. > > si_uid This should be set to a user ID, typically the real user ID of > the sender. > > si_value > This field contains the user data to accompany the signal. For > more information, see the description of the last (union sigval) > argument of sigqueue(3). > > Internally, the kernel sets the si_signo field to the value specified > in sig, so that the receiver of the signal can also obtain the signal > number via that field. > > On Tue, Sep 25, 2018 at 07:19:02PM +0200, Eric W. Biederman wrote: >> >> If there is some application that calls sigqueueinfo directly that has >> a problem with this added sanity check we can revisit this when we see >> what kind of crazy that application is doing. > > > I already know two "applications" ;) > > https://github.com/torvalds/linux/blob/master/tools/testing/selftests/ptrace/peeksiginfo.c > https://github.com/checkpoint-restore/criu/blob/master/test/zdtm/static/sigpending.c > > Disclaimer: I'm the author of both of them. Looking at the kernel code the historical behavior has alwasy been to prefer the signal number passed in by the kernel. So sigh. Implmenet __copy_siginfo_from_user and __copy_siginfo_from_user32 to take that signal number and prefer it. The user of ptrace will still use copy_siginfo_from_user and copy_siginfo_from_user32 as they do not and never have had a signal number there. Luckily this change has never made it farther than linux-next. Fixes: e75dc036c445 ("signal: Fail sigqueueinfo if si_signo != sig") Reported-by: Andrei Vagin <avagin@gmail.com> Tested-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-10-05 07:02:48 +00:00
static int __copy_siginfo_from_user(int signo, kernel_siginfo_t *to,
const siginfo_t __user *from)
{
if (copy_from_user(to, from, sizeof(struct kernel_siginfo)))
return -EFAULT;
to->si_signo = signo;
return post_copy_siginfo_from_user(to, from);
}
int copy_siginfo_from_user(kernel_siginfo_t *to, const siginfo_t __user *from)
{
if (copy_from_user(to, from, sizeof(struct kernel_siginfo)))
return -EFAULT;
return post_copy_siginfo_from_user(to, from);
}
signal: Unify and correct copy_siginfo_from_user32 The function copy_siginfo_from_user32 is used for two things, in ptrace since the dawn of siginfo for arbirarily modifying a signal that user space sees, and in sigqueueinfo to send a signal with arbirary siginfo data. Create a single copy of copy_siginfo_from_user32 that all architectures share, and teach it to handle all of the cases in the siginfo union. In the generic version of copy_siginfo_from_user32 ensure that all of the fields in siginfo are initialized so that the siginfo structure can be safely copied to userspace if necessary. When copying the embedded sigval union copy the si_int member. That ensures the 32bit values passes through the kernel unchanged. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-31 22:15:31 +00:00
#ifdef CONFIG_COMPAT
signal: Unify and correct copy_siginfo_to_user32 Among the existing architecture specific versions of copy_siginfo_to_user32 there are several different implementation problems. Some architectures fail to handle all of the cases in in the siginfo union. Some architectures perform a blind copy of the siginfo union when the si_code is negative. A blind copy suggests the data is expected to be in 32bit siginfo format, which means that receiving such a signal via signalfd won't work, or that the data is in 64bit siginfo and the code is copying nonsense to userspace. Create a single instance of copy_siginfo_to_user32 that all of the architectures can share, and teach it to handle all of the cases in the siginfo union correctly, with the assumption that siginfo is stored internally to the kernel is 64bit siginfo format. A special case is made for x86 x32 format. This is needed as presence of both x32 and ia32 on x86_64 results in two different 32bit signal formats. By allowing this small special case there winds up being exactly one code base that needs to be maintained between all of the architectures. Vastly increasing the testing base and the chances of finding bugs. As the x86 copy of copy_siginfo_to_user32 the call of the x86 signal_compat_build_tests were moved into sigaction_compat_abi, so that they will keep running. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-16 00:03:33 +00:00
int copy_siginfo_to_user32(struct compat_siginfo __user *to,
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
const struct kernel_siginfo *from)
signal: Unify and correct copy_siginfo_to_user32 Among the existing architecture specific versions of copy_siginfo_to_user32 there are several different implementation problems. Some architectures fail to handle all of the cases in in the siginfo union. Some architectures perform a blind copy of the siginfo union when the si_code is negative. A blind copy suggests the data is expected to be in 32bit siginfo format, which means that receiving such a signal via signalfd won't work, or that the data is in 64bit siginfo and the code is copying nonsense to userspace. Create a single instance of copy_siginfo_to_user32 that all of the architectures can share, and teach it to handle all of the cases in the siginfo union correctly, with the assumption that siginfo is stored internally to the kernel is 64bit siginfo format. A special case is made for x86 x32 format. This is needed as presence of both x32 and ia32 on x86_64 results in two different 32bit signal formats. By allowing this small special case there winds up being exactly one code base that needs to be maintained between all of the architectures. Vastly increasing the testing base and the chances of finding bugs. As the x86 copy of copy_siginfo_to_user32 the call of the x86 signal_compat_build_tests were moved into sigaction_compat_abi, so that they will keep running. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-16 00:03:33 +00:00
#if defined(CONFIG_X86_X32_ABI) || defined(CONFIG_IA32_EMULATION)
{
return __copy_siginfo_to_user32(to, from, in_x32_syscall());
}
int __copy_siginfo_to_user32(struct compat_siginfo __user *to,
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
const struct kernel_siginfo *from, bool x32_ABI)
signal: Unify and correct copy_siginfo_to_user32 Among the existing architecture specific versions of copy_siginfo_to_user32 there are several different implementation problems. Some architectures fail to handle all of the cases in in the siginfo union. Some architectures perform a blind copy of the siginfo union when the si_code is negative. A blind copy suggests the data is expected to be in 32bit siginfo format, which means that receiving such a signal via signalfd won't work, or that the data is in 64bit siginfo and the code is copying nonsense to userspace. Create a single instance of copy_siginfo_to_user32 that all of the architectures can share, and teach it to handle all of the cases in the siginfo union correctly, with the assumption that siginfo is stored internally to the kernel is 64bit siginfo format. A special case is made for x86 x32 format. This is needed as presence of both x32 and ia32 on x86_64 results in two different 32bit signal formats. By allowing this small special case there winds up being exactly one code base that needs to be maintained between all of the architectures. Vastly increasing the testing base and the chances of finding bugs. As the x86 copy of copy_siginfo_to_user32 the call of the x86 signal_compat_build_tests were moved into sigaction_compat_abi, so that they will keep running. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-16 00:03:33 +00:00
#endif
{
struct compat_siginfo new;
memset(&new, 0, sizeof(new));
new.si_signo = from->si_signo;
new.si_errno = from->si_errno;
new.si_code = from->si_code;
switch(siginfo_layout(from->si_signo, from->si_code)) {
case SIL_KILL:
new.si_pid = from->si_pid;
new.si_uid = from->si_uid;
break;
case SIL_TIMER:
new.si_tid = from->si_tid;
new.si_overrun = from->si_overrun;
new.si_int = from->si_int;
break;
case SIL_POLL:
new.si_band = from->si_band;
new.si_fd = from->si_fd;
break;
case SIL_FAULT:
new.si_addr = ptr_to_compat(from->si_addr);
#ifdef __ARCH_SI_TRAPNO
new.si_trapno = from->si_trapno;
#endif
signal: Extend siginfo_layout with SIL_FAULT_{MCEERR|BNDERR|PKUERR} Update the siginfo_layout function and enum siginfo_layout to represent all of the possible field layouts of struct siginfo. This allows the uses of siginfo_layout in um and arm64 where they are testing for SIL_FAULT to be more accurate as this rules out the other cases. Further this allows the switch statements on siginfo_layout to be simpler if perhaps a little more wordy. Making it easier to understand what is actually going on. As SIL_FAULT_BNDERR and SIL_FAULT_PKUERR are never expected to appear in signalfd just treat them as SIL_FAULT. To include them would take 20 extra bytes an pretty much fill up what is left of signalfd_siginfo. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-04-25 01:59:47 +00:00
break;
case SIL_FAULT_MCEERR:
new.si_addr = ptr_to_compat(from->si_addr);
#ifdef __ARCH_SI_TRAPNO
new.si_trapno = from->si_trapno;
signal: Unify and correct copy_siginfo_to_user32 Among the existing architecture specific versions of copy_siginfo_to_user32 there are several different implementation problems. Some architectures fail to handle all of the cases in in the siginfo union. Some architectures perform a blind copy of the siginfo union when the si_code is negative. A blind copy suggests the data is expected to be in 32bit siginfo format, which means that receiving such a signal via signalfd won't work, or that the data is in 64bit siginfo and the code is copying nonsense to userspace. Create a single instance of copy_siginfo_to_user32 that all of the architectures can share, and teach it to handle all of the cases in the siginfo union correctly, with the assumption that siginfo is stored internally to the kernel is 64bit siginfo format. A special case is made for x86 x32 format. This is needed as presence of both x32 and ia32 on x86_64 results in two different 32bit signal formats. By allowing this small special case there winds up being exactly one code base that needs to be maintained between all of the architectures. Vastly increasing the testing base and the chances of finding bugs. As the x86 copy of copy_siginfo_to_user32 the call of the x86 signal_compat_build_tests were moved into sigaction_compat_abi, so that they will keep running. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-16 00:03:33 +00:00
#endif
signal: Extend siginfo_layout with SIL_FAULT_{MCEERR|BNDERR|PKUERR} Update the siginfo_layout function and enum siginfo_layout to represent all of the possible field layouts of struct siginfo. This allows the uses of siginfo_layout in um and arm64 where they are testing for SIL_FAULT to be more accurate as this rules out the other cases. Further this allows the switch statements on siginfo_layout to be simpler if perhaps a little more wordy. Making it easier to understand what is actually going on. As SIL_FAULT_BNDERR and SIL_FAULT_PKUERR are never expected to appear in signalfd just treat them as SIL_FAULT. To include them would take 20 extra bytes an pretty much fill up what is left of signalfd_siginfo. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-04-25 01:59:47 +00:00
new.si_addr_lsb = from->si_addr_lsb;
break;
case SIL_FAULT_BNDERR:
new.si_addr = ptr_to_compat(from->si_addr);
#ifdef __ARCH_SI_TRAPNO
new.si_trapno = from->si_trapno;
signal: Unify and correct copy_siginfo_to_user32 Among the existing architecture specific versions of copy_siginfo_to_user32 there are several different implementation problems. Some architectures fail to handle all of the cases in in the siginfo union. Some architectures perform a blind copy of the siginfo union when the si_code is negative. A blind copy suggests the data is expected to be in 32bit siginfo format, which means that receiving such a signal via signalfd won't work, or that the data is in 64bit siginfo and the code is copying nonsense to userspace. Create a single instance of copy_siginfo_to_user32 that all of the architectures can share, and teach it to handle all of the cases in the siginfo union correctly, with the assumption that siginfo is stored internally to the kernel is 64bit siginfo format. A special case is made for x86 x32 format. This is needed as presence of both x32 and ia32 on x86_64 results in two different 32bit signal formats. By allowing this small special case there winds up being exactly one code base that needs to be maintained between all of the architectures. Vastly increasing the testing base and the chances of finding bugs. As the x86 copy of copy_siginfo_to_user32 the call of the x86 signal_compat_build_tests were moved into sigaction_compat_abi, so that they will keep running. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-16 00:03:33 +00:00
#endif
signal: Extend siginfo_layout with SIL_FAULT_{MCEERR|BNDERR|PKUERR} Update the siginfo_layout function and enum siginfo_layout to represent all of the possible field layouts of struct siginfo. This allows the uses of siginfo_layout in um and arm64 where they are testing for SIL_FAULT to be more accurate as this rules out the other cases. Further this allows the switch statements on siginfo_layout to be simpler if perhaps a little more wordy. Making it easier to understand what is actually going on. As SIL_FAULT_BNDERR and SIL_FAULT_PKUERR are never expected to appear in signalfd just treat them as SIL_FAULT. To include them would take 20 extra bytes an pretty much fill up what is left of signalfd_siginfo. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-04-25 01:59:47 +00:00
new.si_lower = ptr_to_compat(from->si_lower);
new.si_upper = ptr_to_compat(from->si_upper);
break;
case SIL_FAULT_PKUERR:
new.si_addr = ptr_to_compat(from->si_addr);
#ifdef __ARCH_SI_TRAPNO
new.si_trapno = from->si_trapno;
signal: Unify and correct copy_siginfo_to_user32 Among the existing architecture specific versions of copy_siginfo_to_user32 there are several different implementation problems. Some architectures fail to handle all of the cases in in the siginfo union. Some architectures perform a blind copy of the siginfo union when the si_code is negative. A blind copy suggests the data is expected to be in 32bit siginfo format, which means that receiving such a signal via signalfd won't work, or that the data is in 64bit siginfo and the code is copying nonsense to userspace. Create a single instance of copy_siginfo_to_user32 that all of the architectures can share, and teach it to handle all of the cases in the siginfo union correctly, with the assumption that siginfo is stored internally to the kernel is 64bit siginfo format. A special case is made for x86 x32 format. This is needed as presence of both x32 and ia32 on x86_64 results in two different 32bit signal formats. By allowing this small special case there winds up being exactly one code base that needs to be maintained between all of the architectures. Vastly increasing the testing base and the chances of finding bugs. As the x86 copy of copy_siginfo_to_user32 the call of the x86 signal_compat_build_tests were moved into sigaction_compat_abi, so that they will keep running. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-16 00:03:33 +00:00
#endif
signal: Extend siginfo_layout with SIL_FAULT_{MCEERR|BNDERR|PKUERR} Update the siginfo_layout function and enum siginfo_layout to represent all of the possible field layouts of struct siginfo. This allows the uses of siginfo_layout in um and arm64 where they are testing for SIL_FAULT to be more accurate as this rules out the other cases. Further this allows the switch statements on siginfo_layout to be simpler if perhaps a little more wordy. Making it easier to understand what is actually going on. As SIL_FAULT_BNDERR and SIL_FAULT_PKUERR are never expected to appear in signalfd just treat them as SIL_FAULT. To include them would take 20 extra bytes an pretty much fill up what is left of signalfd_siginfo. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-04-25 01:59:47 +00:00
new.si_pkey = from->si_pkey;
signal: Unify and correct copy_siginfo_to_user32 Among the existing architecture specific versions of copy_siginfo_to_user32 there are several different implementation problems. Some architectures fail to handle all of the cases in in the siginfo union. Some architectures perform a blind copy of the siginfo union when the si_code is negative. A blind copy suggests the data is expected to be in 32bit siginfo format, which means that receiving such a signal via signalfd won't work, or that the data is in 64bit siginfo and the code is copying nonsense to userspace. Create a single instance of copy_siginfo_to_user32 that all of the architectures can share, and teach it to handle all of the cases in the siginfo union correctly, with the assumption that siginfo is stored internally to the kernel is 64bit siginfo format. A special case is made for x86 x32 format. This is needed as presence of both x32 and ia32 on x86_64 results in two different 32bit signal formats. By allowing this small special case there winds up being exactly one code base that needs to be maintained between all of the architectures. Vastly increasing the testing base and the chances of finding bugs. As the x86 copy of copy_siginfo_to_user32 the call of the x86 signal_compat_build_tests were moved into sigaction_compat_abi, so that they will keep running. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-16 00:03:33 +00:00
break;
case SIL_CHLD:
new.si_pid = from->si_pid;
new.si_uid = from->si_uid;
new.si_status = from->si_status;
#ifdef CONFIG_X86_X32_ABI
if (x32_ABI) {
new._sifields._sigchld_x32._utime = from->si_utime;
new._sifields._sigchld_x32._stime = from->si_stime;
} else
#endif
{
new.si_utime = from->si_utime;
new.si_stime = from->si_stime;
}
break;
case SIL_RT:
new.si_pid = from->si_pid;
new.si_uid = from->si_uid;
new.si_int = from->si_int;
break;
case SIL_SYS:
new.si_call_addr = ptr_to_compat(from->si_call_addr);
new.si_syscall = from->si_syscall;
new.si_arch = from->si_arch;
break;
}
if (copy_to_user(to, &new, sizeof(struct compat_siginfo)))
return -EFAULT;
return 0;
}
signal: In sigqueueinfo prefer sig not si_signo Andrei Vagin <avagin@gmail.com> reported: > Accoding to the man page, the user should not set si_signo, it has to be set > by kernel. > > $ man 2 rt_sigqueueinfo > > The uinfo argument specifies the data to accompany the signal. This > argument is a pointer to a structure of type siginfo_t, described in > sigaction(2) (and defined by including <sigaction.h>). The caller > should set the following fields in this structure: > > si_code > This must be one of the SI_* codes in the Linux kernel source > file include/asm-generic/siginfo.h, with the restriction that > the code must be negative (i.e., cannot be SI_USER, which is > used by the kernel to indicate a signal sent by kill(2)) and > cannot (since Linux 2.6.39) be SI_TKILL (which is used by the > kernel to indicate a signal sent using tgkill(2)). > > si_pid This should be set to a process ID, typically the process ID of > the sender. > > si_uid This should be set to a user ID, typically the real user ID of > the sender. > > si_value > This field contains the user data to accompany the signal. For > more information, see the description of the last (union sigval) > argument of sigqueue(3). > > Internally, the kernel sets the si_signo field to the value specified > in sig, so that the receiver of the signal can also obtain the signal > number via that field. > > On Tue, Sep 25, 2018 at 07:19:02PM +0200, Eric W. Biederman wrote: >> >> If there is some application that calls sigqueueinfo directly that has >> a problem with this added sanity check we can revisit this when we see >> what kind of crazy that application is doing. > > > I already know two "applications" ;) > > https://github.com/torvalds/linux/blob/master/tools/testing/selftests/ptrace/peeksiginfo.c > https://github.com/checkpoint-restore/criu/blob/master/test/zdtm/static/sigpending.c > > Disclaimer: I'm the author of both of them. Looking at the kernel code the historical behavior has alwasy been to prefer the signal number passed in by the kernel. So sigh. Implmenet __copy_siginfo_from_user and __copy_siginfo_from_user32 to take that signal number and prefer it. The user of ptrace will still use copy_siginfo_from_user and copy_siginfo_from_user32 as they do not and never have had a signal number there. Luckily this change has never made it farther than linux-next. Fixes: e75dc036c445 ("signal: Fail sigqueueinfo if si_signo != sig") Reported-by: Andrei Vagin <avagin@gmail.com> Tested-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-10-05 07:02:48 +00:00
static int post_copy_siginfo_from_user32(kernel_siginfo_t *to,
const struct compat_siginfo *from)
signal: Unify and correct copy_siginfo_from_user32 The function copy_siginfo_from_user32 is used for two things, in ptrace since the dawn of siginfo for arbirarily modifying a signal that user space sees, and in sigqueueinfo to send a signal with arbirary siginfo data. Create a single copy of copy_siginfo_from_user32 that all architectures share, and teach it to handle all of the cases in the siginfo union. In the generic version of copy_siginfo_from_user32 ensure that all of the fields in siginfo are initialized so that the siginfo structure can be safely copied to userspace if necessary. When copying the embedded sigval union copy the si_int member. That ensures the 32bit values passes through the kernel unchanged. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-31 22:15:31 +00:00
{
clear_siginfo(to);
signal: In sigqueueinfo prefer sig not si_signo Andrei Vagin <avagin@gmail.com> reported: > Accoding to the man page, the user should not set si_signo, it has to be set > by kernel. > > $ man 2 rt_sigqueueinfo > > The uinfo argument specifies the data to accompany the signal. This > argument is a pointer to a structure of type siginfo_t, described in > sigaction(2) (and defined by including <sigaction.h>). The caller > should set the following fields in this structure: > > si_code > This must be one of the SI_* codes in the Linux kernel source > file include/asm-generic/siginfo.h, with the restriction that > the code must be negative (i.e., cannot be SI_USER, which is > used by the kernel to indicate a signal sent by kill(2)) and > cannot (since Linux 2.6.39) be SI_TKILL (which is used by the > kernel to indicate a signal sent using tgkill(2)). > > si_pid This should be set to a process ID, typically the process ID of > the sender. > > si_uid This should be set to a user ID, typically the real user ID of > the sender. > > si_value > This field contains the user data to accompany the signal. For > more information, see the description of the last (union sigval) > argument of sigqueue(3). > > Internally, the kernel sets the si_signo field to the value specified > in sig, so that the receiver of the signal can also obtain the signal > number via that field. > > On Tue, Sep 25, 2018 at 07:19:02PM +0200, Eric W. Biederman wrote: >> >> If there is some application that calls sigqueueinfo directly that has >> a problem with this added sanity check we can revisit this when we see >> what kind of crazy that application is doing. > > > I already know two "applications" ;) > > https://github.com/torvalds/linux/blob/master/tools/testing/selftests/ptrace/peeksiginfo.c > https://github.com/checkpoint-restore/criu/blob/master/test/zdtm/static/sigpending.c > > Disclaimer: I'm the author of both of them. Looking at the kernel code the historical behavior has alwasy been to prefer the signal number passed in by the kernel. So sigh. Implmenet __copy_siginfo_from_user and __copy_siginfo_from_user32 to take that signal number and prefer it. The user of ptrace will still use copy_siginfo_from_user and copy_siginfo_from_user32 as they do not and never have had a signal number there. Luckily this change has never made it farther than linux-next. Fixes: e75dc036c445 ("signal: Fail sigqueueinfo if si_signo != sig") Reported-by: Andrei Vagin <avagin@gmail.com> Tested-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-10-05 07:02:48 +00:00
to->si_signo = from->si_signo;
to->si_errno = from->si_errno;
to->si_code = from->si_code;
switch(siginfo_layout(from->si_signo, from->si_code)) {
signal: Unify and correct copy_siginfo_from_user32 The function copy_siginfo_from_user32 is used for two things, in ptrace since the dawn of siginfo for arbirarily modifying a signal that user space sees, and in sigqueueinfo to send a signal with arbirary siginfo data. Create a single copy of copy_siginfo_from_user32 that all architectures share, and teach it to handle all of the cases in the siginfo union. In the generic version of copy_siginfo_from_user32 ensure that all of the fields in siginfo are initialized so that the siginfo structure can be safely copied to userspace if necessary. When copying the embedded sigval union copy the si_int member. That ensures the 32bit values passes through the kernel unchanged. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-31 22:15:31 +00:00
case SIL_KILL:
signal: In sigqueueinfo prefer sig not si_signo Andrei Vagin <avagin@gmail.com> reported: > Accoding to the man page, the user should not set si_signo, it has to be set > by kernel. > > $ man 2 rt_sigqueueinfo > > The uinfo argument specifies the data to accompany the signal. This > argument is a pointer to a structure of type siginfo_t, described in > sigaction(2) (and defined by including <sigaction.h>). The caller > should set the following fields in this structure: > > si_code > This must be one of the SI_* codes in the Linux kernel source > file include/asm-generic/siginfo.h, with the restriction that > the code must be negative (i.e., cannot be SI_USER, which is > used by the kernel to indicate a signal sent by kill(2)) and > cannot (since Linux 2.6.39) be SI_TKILL (which is used by the > kernel to indicate a signal sent using tgkill(2)). > > si_pid This should be set to a process ID, typically the process ID of > the sender. > > si_uid This should be set to a user ID, typically the real user ID of > the sender. > > si_value > This field contains the user data to accompany the signal. For > more information, see the description of the last (union sigval) > argument of sigqueue(3). > > Internally, the kernel sets the si_signo field to the value specified > in sig, so that the receiver of the signal can also obtain the signal > number via that field. > > On Tue, Sep 25, 2018 at 07:19:02PM +0200, Eric W. Biederman wrote: >> >> If there is some application that calls sigqueueinfo directly that has >> a problem with this added sanity check we can revisit this when we see >> what kind of crazy that application is doing. > > > I already know two "applications" ;) > > https://github.com/torvalds/linux/blob/master/tools/testing/selftests/ptrace/peeksiginfo.c > https://github.com/checkpoint-restore/criu/blob/master/test/zdtm/static/sigpending.c > > Disclaimer: I'm the author of both of them. Looking at the kernel code the historical behavior has alwasy been to prefer the signal number passed in by the kernel. So sigh. Implmenet __copy_siginfo_from_user and __copy_siginfo_from_user32 to take that signal number and prefer it. The user of ptrace will still use copy_siginfo_from_user and copy_siginfo_from_user32 as they do not and never have had a signal number there. Luckily this change has never made it farther than linux-next. Fixes: e75dc036c445 ("signal: Fail sigqueueinfo if si_signo != sig") Reported-by: Andrei Vagin <avagin@gmail.com> Tested-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-10-05 07:02:48 +00:00
to->si_pid = from->si_pid;
to->si_uid = from->si_uid;
signal: Unify and correct copy_siginfo_from_user32 The function copy_siginfo_from_user32 is used for two things, in ptrace since the dawn of siginfo for arbirarily modifying a signal that user space sees, and in sigqueueinfo to send a signal with arbirary siginfo data. Create a single copy of copy_siginfo_from_user32 that all architectures share, and teach it to handle all of the cases in the siginfo union. In the generic version of copy_siginfo_from_user32 ensure that all of the fields in siginfo are initialized so that the siginfo structure can be safely copied to userspace if necessary. When copying the embedded sigval union copy the si_int member. That ensures the 32bit values passes through the kernel unchanged. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-31 22:15:31 +00:00
break;
case SIL_TIMER:
signal: In sigqueueinfo prefer sig not si_signo Andrei Vagin <avagin@gmail.com> reported: > Accoding to the man page, the user should not set si_signo, it has to be set > by kernel. > > $ man 2 rt_sigqueueinfo > > The uinfo argument specifies the data to accompany the signal. This > argument is a pointer to a structure of type siginfo_t, described in > sigaction(2) (and defined by including <sigaction.h>). The caller > should set the following fields in this structure: > > si_code > This must be one of the SI_* codes in the Linux kernel source > file include/asm-generic/siginfo.h, with the restriction that > the code must be negative (i.e., cannot be SI_USER, which is > used by the kernel to indicate a signal sent by kill(2)) and > cannot (since Linux 2.6.39) be SI_TKILL (which is used by the > kernel to indicate a signal sent using tgkill(2)). > > si_pid This should be set to a process ID, typically the process ID of > the sender. > > si_uid This should be set to a user ID, typically the real user ID of > the sender. > > si_value > This field contains the user data to accompany the signal. For > more information, see the description of the last (union sigval) > argument of sigqueue(3). > > Internally, the kernel sets the si_signo field to the value specified > in sig, so that the receiver of the signal can also obtain the signal > number via that field. > > On Tue, Sep 25, 2018 at 07:19:02PM +0200, Eric W. Biederman wrote: >> >> If there is some application that calls sigqueueinfo directly that has >> a problem with this added sanity check we can revisit this when we see >> what kind of crazy that application is doing. > > > I already know two "applications" ;) > > https://github.com/torvalds/linux/blob/master/tools/testing/selftests/ptrace/peeksiginfo.c > https://github.com/checkpoint-restore/criu/blob/master/test/zdtm/static/sigpending.c > > Disclaimer: I'm the author of both of them. Looking at the kernel code the historical behavior has alwasy been to prefer the signal number passed in by the kernel. So sigh. Implmenet __copy_siginfo_from_user and __copy_siginfo_from_user32 to take that signal number and prefer it. The user of ptrace will still use copy_siginfo_from_user and copy_siginfo_from_user32 as they do not and never have had a signal number there. Luckily this change has never made it farther than linux-next. Fixes: e75dc036c445 ("signal: Fail sigqueueinfo if si_signo != sig") Reported-by: Andrei Vagin <avagin@gmail.com> Tested-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-10-05 07:02:48 +00:00
to->si_tid = from->si_tid;
to->si_overrun = from->si_overrun;
to->si_int = from->si_int;
signal: Unify and correct copy_siginfo_from_user32 The function copy_siginfo_from_user32 is used for two things, in ptrace since the dawn of siginfo for arbirarily modifying a signal that user space sees, and in sigqueueinfo to send a signal with arbirary siginfo data. Create a single copy of copy_siginfo_from_user32 that all architectures share, and teach it to handle all of the cases in the siginfo union. In the generic version of copy_siginfo_from_user32 ensure that all of the fields in siginfo are initialized so that the siginfo structure can be safely copied to userspace if necessary. When copying the embedded sigval union copy the si_int member. That ensures the 32bit values passes through the kernel unchanged. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-31 22:15:31 +00:00
break;
case SIL_POLL:
signal: In sigqueueinfo prefer sig not si_signo Andrei Vagin <avagin@gmail.com> reported: > Accoding to the man page, the user should not set si_signo, it has to be set > by kernel. > > $ man 2 rt_sigqueueinfo > > The uinfo argument specifies the data to accompany the signal. This > argument is a pointer to a structure of type siginfo_t, described in > sigaction(2) (and defined by including <sigaction.h>). The caller > should set the following fields in this structure: > > si_code > This must be one of the SI_* codes in the Linux kernel source > file include/asm-generic/siginfo.h, with the restriction that > the code must be negative (i.e., cannot be SI_USER, which is > used by the kernel to indicate a signal sent by kill(2)) and > cannot (since Linux 2.6.39) be SI_TKILL (which is used by the > kernel to indicate a signal sent using tgkill(2)). > > si_pid This should be set to a process ID, typically the process ID of > the sender. > > si_uid This should be set to a user ID, typically the real user ID of > the sender. > > si_value > This field contains the user data to accompany the signal. For > more information, see the description of the last (union sigval) > argument of sigqueue(3). > > Internally, the kernel sets the si_signo field to the value specified > in sig, so that the receiver of the signal can also obtain the signal > number via that field. > > On Tue, Sep 25, 2018 at 07:19:02PM +0200, Eric W. Biederman wrote: >> >> If there is some application that calls sigqueueinfo directly that has >> a problem with this added sanity check we can revisit this when we see >> what kind of crazy that application is doing. > > > I already know two "applications" ;) > > https://github.com/torvalds/linux/blob/master/tools/testing/selftests/ptrace/peeksiginfo.c > https://github.com/checkpoint-restore/criu/blob/master/test/zdtm/static/sigpending.c > > Disclaimer: I'm the author of both of them. Looking at the kernel code the historical behavior has alwasy been to prefer the signal number passed in by the kernel. So sigh. Implmenet __copy_siginfo_from_user and __copy_siginfo_from_user32 to take that signal number and prefer it. The user of ptrace will still use copy_siginfo_from_user and copy_siginfo_from_user32 as they do not and never have had a signal number there. Luckily this change has never made it farther than linux-next. Fixes: e75dc036c445 ("signal: Fail sigqueueinfo if si_signo != sig") Reported-by: Andrei Vagin <avagin@gmail.com> Tested-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-10-05 07:02:48 +00:00
to->si_band = from->si_band;
to->si_fd = from->si_fd;
signal: Unify and correct copy_siginfo_from_user32 The function copy_siginfo_from_user32 is used for two things, in ptrace since the dawn of siginfo for arbirarily modifying a signal that user space sees, and in sigqueueinfo to send a signal with arbirary siginfo data. Create a single copy of copy_siginfo_from_user32 that all architectures share, and teach it to handle all of the cases in the siginfo union. In the generic version of copy_siginfo_from_user32 ensure that all of the fields in siginfo are initialized so that the siginfo structure can be safely copied to userspace if necessary. When copying the embedded sigval union copy the si_int member. That ensures the 32bit values passes through the kernel unchanged. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-31 22:15:31 +00:00
break;
case SIL_FAULT:
signal: In sigqueueinfo prefer sig not si_signo Andrei Vagin <avagin@gmail.com> reported: > Accoding to the man page, the user should not set si_signo, it has to be set > by kernel. > > $ man 2 rt_sigqueueinfo > > The uinfo argument specifies the data to accompany the signal. This > argument is a pointer to a structure of type siginfo_t, described in > sigaction(2) (and defined by including <sigaction.h>). The caller > should set the following fields in this structure: > > si_code > This must be one of the SI_* codes in the Linux kernel source > file include/asm-generic/siginfo.h, with the restriction that > the code must be negative (i.e., cannot be SI_USER, which is > used by the kernel to indicate a signal sent by kill(2)) and > cannot (since Linux 2.6.39) be SI_TKILL (which is used by the > kernel to indicate a signal sent using tgkill(2)). > > si_pid This should be set to a process ID, typically the process ID of > the sender. > > si_uid This should be set to a user ID, typically the real user ID of > the sender. > > si_value > This field contains the user data to accompany the signal. For > more information, see the description of the last (union sigval) > argument of sigqueue(3). > > Internally, the kernel sets the si_signo field to the value specified > in sig, so that the receiver of the signal can also obtain the signal > number via that field. > > On Tue, Sep 25, 2018 at 07:19:02PM +0200, Eric W. Biederman wrote: >> >> If there is some application that calls sigqueueinfo directly that has >> a problem with this added sanity check we can revisit this when we see >> what kind of crazy that application is doing. > > > I already know two "applications" ;) > > https://github.com/torvalds/linux/blob/master/tools/testing/selftests/ptrace/peeksiginfo.c > https://github.com/checkpoint-restore/criu/blob/master/test/zdtm/static/sigpending.c > > Disclaimer: I'm the author of both of them. Looking at the kernel code the historical behavior has alwasy been to prefer the signal number passed in by the kernel. So sigh. Implmenet __copy_siginfo_from_user and __copy_siginfo_from_user32 to take that signal number and prefer it. The user of ptrace will still use copy_siginfo_from_user and copy_siginfo_from_user32 as they do not and never have had a signal number there. Luckily this change has never made it farther than linux-next. Fixes: e75dc036c445 ("signal: Fail sigqueueinfo if si_signo != sig") Reported-by: Andrei Vagin <avagin@gmail.com> Tested-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-10-05 07:02:48 +00:00
to->si_addr = compat_ptr(from->si_addr);
signal: Unify and correct copy_siginfo_from_user32 The function copy_siginfo_from_user32 is used for two things, in ptrace since the dawn of siginfo for arbirarily modifying a signal that user space sees, and in sigqueueinfo to send a signal with arbirary siginfo data. Create a single copy of copy_siginfo_from_user32 that all architectures share, and teach it to handle all of the cases in the siginfo union. In the generic version of copy_siginfo_from_user32 ensure that all of the fields in siginfo are initialized so that the siginfo structure can be safely copied to userspace if necessary. When copying the embedded sigval union copy the si_int member. That ensures the 32bit values passes through the kernel unchanged. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-31 22:15:31 +00:00
#ifdef __ARCH_SI_TRAPNO
signal: In sigqueueinfo prefer sig not si_signo Andrei Vagin <avagin@gmail.com> reported: > Accoding to the man page, the user should not set si_signo, it has to be set > by kernel. > > $ man 2 rt_sigqueueinfo > > The uinfo argument specifies the data to accompany the signal. This > argument is a pointer to a structure of type siginfo_t, described in > sigaction(2) (and defined by including <sigaction.h>). The caller > should set the following fields in this structure: > > si_code > This must be one of the SI_* codes in the Linux kernel source > file include/asm-generic/siginfo.h, with the restriction that > the code must be negative (i.e., cannot be SI_USER, which is > used by the kernel to indicate a signal sent by kill(2)) and > cannot (since Linux 2.6.39) be SI_TKILL (which is used by the > kernel to indicate a signal sent using tgkill(2)). > > si_pid This should be set to a process ID, typically the process ID of > the sender. > > si_uid This should be set to a user ID, typically the real user ID of > the sender. > > si_value > This field contains the user data to accompany the signal. For > more information, see the description of the last (union sigval) > argument of sigqueue(3). > > Internally, the kernel sets the si_signo field to the value specified > in sig, so that the receiver of the signal can also obtain the signal > number via that field. > > On Tue, Sep 25, 2018 at 07:19:02PM +0200, Eric W. Biederman wrote: >> >> If there is some application that calls sigqueueinfo directly that has >> a problem with this added sanity check we can revisit this when we see >> what kind of crazy that application is doing. > > > I already know two "applications" ;) > > https://github.com/torvalds/linux/blob/master/tools/testing/selftests/ptrace/peeksiginfo.c > https://github.com/checkpoint-restore/criu/blob/master/test/zdtm/static/sigpending.c > > Disclaimer: I'm the author of both of them. Looking at the kernel code the historical behavior has alwasy been to prefer the signal number passed in by the kernel. So sigh. Implmenet __copy_siginfo_from_user and __copy_siginfo_from_user32 to take that signal number and prefer it. The user of ptrace will still use copy_siginfo_from_user and copy_siginfo_from_user32 as they do not and never have had a signal number there. Luckily this change has never made it farther than linux-next. Fixes: e75dc036c445 ("signal: Fail sigqueueinfo if si_signo != sig") Reported-by: Andrei Vagin <avagin@gmail.com> Tested-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-10-05 07:02:48 +00:00
to->si_trapno = from->si_trapno;
signal: Unify and correct copy_siginfo_from_user32 The function copy_siginfo_from_user32 is used for two things, in ptrace since the dawn of siginfo for arbirarily modifying a signal that user space sees, and in sigqueueinfo to send a signal with arbirary siginfo data. Create a single copy of copy_siginfo_from_user32 that all architectures share, and teach it to handle all of the cases in the siginfo union. In the generic version of copy_siginfo_from_user32 ensure that all of the fields in siginfo are initialized so that the siginfo structure can be safely copied to userspace if necessary. When copying the embedded sigval union copy the si_int member. That ensures the 32bit values passes through the kernel unchanged. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-31 22:15:31 +00:00
#endif
signal: Extend siginfo_layout with SIL_FAULT_{MCEERR|BNDERR|PKUERR} Update the siginfo_layout function and enum siginfo_layout to represent all of the possible field layouts of struct siginfo. This allows the uses of siginfo_layout in um and arm64 where they are testing for SIL_FAULT to be more accurate as this rules out the other cases. Further this allows the switch statements on siginfo_layout to be simpler if perhaps a little more wordy. Making it easier to understand what is actually going on. As SIL_FAULT_BNDERR and SIL_FAULT_PKUERR are never expected to appear in signalfd just treat them as SIL_FAULT. To include them would take 20 extra bytes an pretty much fill up what is left of signalfd_siginfo. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-04-25 01:59:47 +00:00
break;
case SIL_FAULT_MCEERR:
signal: In sigqueueinfo prefer sig not si_signo Andrei Vagin <avagin@gmail.com> reported: > Accoding to the man page, the user should not set si_signo, it has to be set > by kernel. > > $ man 2 rt_sigqueueinfo > > The uinfo argument specifies the data to accompany the signal. This > argument is a pointer to a structure of type siginfo_t, described in > sigaction(2) (and defined by including <sigaction.h>). The caller > should set the following fields in this structure: > > si_code > This must be one of the SI_* codes in the Linux kernel source > file include/asm-generic/siginfo.h, with the restriction that > the code must be negative (i.e., cannot be SI_USER, which is > used by the kernel to indicate a signal sent by kill(2)) and > cannot (since Linux 2.6.39) be SI_TKILL (which is used by the > kernel to indicate a signal sent using tgkill(2)). > > si_pid This should be set to a process ID, typically the process ID of > the sender. > > si_uid This should be set to a user ID, typically the real user ID of > the sender. > > si_value > This field contains the user data to accompany the signal. For > more information, see the description of the last (union sigval) > argument of sigqueue(3). > > Internally, the kernel sets the si_signo field to the value specified > in sig, so that the receiver of the signal can also obtain the signal > number via that field. > > On Tue, Sep 25, 2018 at 07:19:02PM +0200, Eric W. Biederman wrote: >> >> If there is some application that calls sigqueueinfo directly that has >> a problem with this added sanity check we can revisit this when we see >> what kind of crazy that application is doing. > > > I already know two "applications" ;) > > https://github.com/torvalds/linux/blob/master/tools/testing/selftests/ptrace/peeksiginfo.c > https://github.com/checkpoint-restore/criu/blob/master/test/zdtm/static/sigpending.c > > Disclaimer: I'm the author of both of them. Looking at the kernel code the historical behavior has alwasy been to prefer the signal number passed in by the kernel. So sigh. Implmenet __copy_siginfo_from_user and __copy_siginfo_from_user32 to take that signal number and prefer it. The user of ptrace will still use copy_siginfo_from_user and copy_siginfo_from_user32 as they do not and never have had a signal number there. Luckily this change has never made it farther than linux-next. Fixes: e75dc036c445 ("signal: Fail sigqueueinfo if si_signo != sig") Reported-by: Andrei Vagin <avagin@gmail.com> Tested-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-10-05 07:02:48 +00:00
to->si_addr = compat_ptr(from->si_addr);
signal: Extend siginfo_layout with SIL_FAULT_{MCEERR|BNDERR|PKUERR} Update the siginfo_layout function and enum siginfo_layout to represent all of the possible field layouts of struct siginfo. This allows the uses of siginfo_layout in um and arm64 where they are testing for SIL_FAULT to be more accurate as this rules out the other cases. Further this allows the switch statements on siginfo_layout to be simpler if perhaps a little more wordy. Making it easier to understand what is actually going on. As SIL_FAULT_BNDERR and SIL_FAULT_PKUERR are never expected to appear in signalfd just treat them as SIL_FAULT. To include them would take 20 extra bytes an pretty much fill up what is left of signalfd_siginfo. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-04-25 01:59:47 +00:00
#ifdef __ARCH_SI_TRAPNO
signal: In sigqueueinfo prefer sig not si_signo Andrei Vagin <avagin@gmail.com> reported: > Accoding to the man page, the user should not set si_signo, it has to be set > by kernel. > > $ man 2 rt_sigqueueinfo > > The uinfo argument specifies the data to accompany the signal. This > argument is a pointer to a structure of type siginfo_t, described in > sigaction(2) (and defined by including <sigaction.h>). The caller > should set the following fields in this structure: > > si_code > This must be one of the SI_* codes in the Linux kernel source > file include/asm-generic/siginfo.h, with the restriction that > the code must be negative (i.e., cannot be SI_USER, which is > used by the kernel to indicate a signal sent by kill(2)) and > cannot (since Linux 2.6.39) be SI_TKILL (which is used by the > kernel to indicate a signal sent using tgkill(2)). > > si_pid This should be set to a process ID, typically the process ID of > the sender. > > si_uid This should be set to a user ID, typically the real user ID of > the sender. > > si_value > This field contains the user data to accompany the signal. For > more information, see the description of the last (union sigval) > argument of sigqueue(3). > > Internally, the kernel sets the si_signo field to the value specified > in sig, so that the receiver of the signal can also obtain the signal > number via that field. > > On Tue, Sep 25, 2018 at 07:19:02PM +0200, Eric W. Biederman wrote: >> >> If there is some application that calls sigqueueinfo directly that has >> a problem with this added sanity check we can revisit this when we see >> what kind of crazy that application is doing. > > > I already know two "applications" ;) > > https://github.com/torvalds/linux/blob/master/tools/testing/selftests/ptrace/peeksiginfo.c > https://github.com/checkpoint-restore/criu/blob/master/test/zdtm/static/sigpending.c > > Disclaimer: I'm the author of both of them. Looking at the kernel code the historical behavior has alwasy been to prefer the signal number passed in by the kernel. So sigh. Implmenet __copy_siginfo_from_user and __copy_siginfo_from_user32 to take that signal number and prefer it. The user of ptrace will still use copy_siginfo_from_user and copy_siginfo_from_user32 as they do not and never have had a signal number there. Luckily this change has never made it farther than linux-next. Fixes: e75dc036c445 ("signal: Fail sigqueueinfo if si_signo != sig") Reported-by: Andrei Vagin <avagin@gmail.com> Tested-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-10-05 07:02:48 +00:00
to->si_trapno = from->si_trapno;
signal: Unify and correct copy_siginfo_from_user32 The function copy_siginfo_from_user32 is used for two things, in ptrace since the dawn of siginfo for arbirarily modifying a signal that user space sees, and in sigqueueinfo to send a signal with arbirary siginfo data. Create a single copy of copy_siginfo_from_user32 that all architectures share, and teach it to handle all of the cases in the siginfo union. In the generic version of copy_siginfo_from_user32 ensure that all of the fields in siginfo are initialized so that the siginfo structure can be safely copied to userspace if necessary. When copying the embedded sigval union copy the si_int member. That ensures the 32bit values passes through the kernel unchanged. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-31 22:15:31 +00:00
#endif
signal: In sigqueueinfo prefer sig not si_signo Andrei Vagin <avagin@gmail.com> reported: > Accoding to the man page, the user should not set si_signo, it has to be set > by kernel. > > $ man 2 rt_sigqueueinfo > > The uinfo argument specifies the data to accompany the signal. This > argument is a pointer to a structure of type siginfo_t, described in > sigaction(2) (and defined by including <sigaction.h>). The caller > should set the following fields in this structure: > > si_code > This must be one of the SI_* codes in the Linux kernel source > file include/asm-generic/siginfo.h, with the restriction that > the code must be negative (i.e., cannot be SI_USER, which is > used by the kernel to indicate a signal sent by kill(2)) and > cannot (since Linux 2.6.39) be SI_TKILL (which is used by the > kernel to indicate a signal sent using tgkill(2)). > > si_pid This should be set to a process ID, typically the process ID of > the sender. > > si_uid This should be set to a user ID, typically the real user ID of > the sender. > > si_value > This field contains the user data to accompany the signal. For > more information, see the description of the last (union sigval) > argument of sigqueue(3). > > Internally, the kernel sets the si_signo field to the value specified > in sig, so that the receiver of the signal can also obtain the signal > number via that field. > > On Tue, Sep 25, 2018 at 07:19:02PM +0200, Eric W. Biederman wrote: >> >> If there is some application that calls sigqueueinfo directly that has >> a problem with this added sanity check we can revisit this when we see >> what kind of crazy that application is doing. > > > I already know two "applications" ;) > > https://github.com/torvalds/linux/blob/master/tools/testing/selftests/ptrace/peeksiginfo.c > https://github.com/checkpoint-restore/criu/blob/master/test/zdtm/static/sigpending.c > > Disclaimer: I'm the author of both of them. Looking at the kernel code the historical behavior has alwasy been to prefer the signal number passed in by the kernel. So sigh. Implmenet __copy_siginfo_from_user and __copy_siginfo_from_user32 to take that signal number and prefer it. The user of ptrace will still use copy_siginfo_from_user and copy_siginfo_from_user32 as they do not and never have had a signal number there. Luckily this change has never made it farther than linux-next. Fixes: e75dc036c445 ("signal: Fail sigqueueinfo if si_signo != sig") Reported-by: Andrei Vagin <avagin@gmail.com> Tested-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-10-05 07:02:48 +00:00
to->si_addr_lsb = from->si_addr_lsb;
signal: Extend siginfo_layout with SIL_FAULT_{MCEERR|BNDERR|PKUERR} Update the siginfo_layout function and enum siginfo_layout to represent all of the possible field layouts of struct siginfo. This allows the uses of siginfo_layout in um and arm64 where they are testing for SIL_FAULT to be more accurate as this rules out the other cases. Further this allows the switch statements on siginfo_layout to be simpler if perhaps a little more wordy. Making it easier to understand what is actually going on. As SIL_FAULT_BNDERR and SIL_FAULT_PKUERR are never expected to appear in signalfd just treat them as SIL_FAULT. To include them would take 20 extra bytes an pretty much fill up what is left of signalfd_siginfo. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-04-25 01:59:47 +00:00
break;
case SIL_FAULT_BNDERR:
signal: In sigqueueinfo prefer sig not si_signo Andrei Vagin <avagin@gmail.com> reported: > Accoding to the man page, the user should not set si_signo, it has to be set > by kernel. > > $ man 2 rt_sigqueueinfo > > The uinfo argument specifies the data to accompany the signal. This > argument is a pointer to a structure of type siginfo_t, described in > sigaction(2) (and defined by including <sigaction.h>). The caller > should set the following fields in this structure: > > si_code > This must be one of the SI_* codes in the Linux kernel source > file include/asm-generic/siginfo.h, with the restriction that > the code must be negative (i.e., cannot be SI_USER, which is > used by the kernel to indicate a signal sent by kill(2)) and > cannot (since Linux 2.6.39) be SI_TKILL (which is used by the > kernel to indicate a signal sent using tgkill(2)). > > si_pid This should be set to a process ID, typically the process ID of > the sender. > > si_uid This should be set to a user ID, typically the real user ID of > the sender. > > si_value > This field contains the user data to accompany the signal. For > more information, see the description of the last (union sigval) > argument of sigqueue(3). > > Internally, the kernel sets the si_signo field to the value specified > in sig, so that the receiver of the signal can also obtain the signal > number via that field. > > On Tue, Sep 25, 2018 at 07:19:02PM +0200, Eric W. Biederman wrote: >> >> If there is some application that calls sigqueueinfo directly that has >> a problem with this added sanity check we can revisit this when we see >> what kind of crazy that application is doing. > > > I already know two "applications" ;) > > https://github.com/torvalds/linux/blob/master/tools/testing/selftests/ptrace/peeksiginfo.c > https://github.com/checkpoint-restore/criu/blob/master/test/zdtm/static/sigpending.c > > Disclaimer: I'm the author of both of them. Looking at the kernel code the historical behavior has alwasy been to prefer the signal number passed in by the kernel. So sigh. Implmenet __copy_siginfo_from_user and __copy_siginfo_from_user32 to take that signal number and prefer it. The user of ptrace will still use copy_siginfo_from_user and copy_siginfo_from_user32 as they do not and never have had a signal number there. Luckily this change has never made it farther than linux-next. Fixes: e75dc036c445 ("signal: Fail sigqueueinfo if si_signo != sig") Reported-by: Andrei Vagin <avagin@gmail.com> Tested-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-10-05 07:02:48 +00:00
to->si_addr = compat_ptr(from->si_addr);
signal: Extend siginfo_layout with SIL_FAULT_{MCEERR|BNDERR|PKUERR} Update the siginfo_layout function and enum siginfo_layout to represent all of the possible field layouts of struct siginfo. This allows the uses of siginfo_layout in um and arm64 where they are testing for SIL_FAULT to be more accurate as this rules out the other cases. Further this allows the switch statements on siginfo_layout to be simpler if perhaps a little more wordy. Making it easier to understand what is actually going on. As SIL_FAULT_BNDERR and SIL_FAULT_PKUERR are never expected to appear in signalfd just treat them as SIL_FAULT. To include them would take 20 extra bytes an pretty much fill up what is left of signalfd_siginfo. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-04-25 01:59:47 +00:00
#ifdef __ARCH_SI_TRAPNO
signal: In sigqueueinfo prefer sig not si_signo Andrei Vagin <avagin@gmail.com> reported: > Accoding to the man page, the user should not set si_signo, it has to be set > by kernel. > > $ man 2 rt_sigqueueinfo > > The uinfo argument specifies the data to accompany the signal. This > argument is a pointer to a structure of type siginfo_t, described in > sigaction(2) (and defined by including <sigaction.h>). The caller > should set the following fields in this structure: > > si_code > This must be one of the SI_* codes in the Linux kernel source > file include/asm-generic/siginfo.h, with the restriction that > the code must be negative (i.e., cannot be SI_USER, which is > used by the kernel to indicate a signal sent by kill(2)) and > cannot (since Linux 2.6.39) be SI_TKILL (which is used by the > kernel to indicate a signal sent using tgkill(2)). > > si_pid This should be set to a process ID, typically the process ID of > the sender. > > si_uid This should be set to a user ID, typically the real user ID of > the sender. > > si_value > This field contains the user data to accompany the signal. For > more information, see the description of the last (union sigval) > argument of sigqueue(3). > > Internally, the kernel sets the si_signo field to the value specified > in sig, so that the receiver of the signal can also obtain the signal > number via that field. > > On Tue, Sep 25, 2018 at 07:19:02PM +0200, Eric W. Biederman wrote: >> >> If there is some application that calls sigqueueinfo directly that has >> a problem with this added sanity check we can revisit this when we see >> what kind of crazy that application is doing. > > > I already know two "applications" ;) > > https://github.com/torvalds/linux/blob/master/tools/testing/selftests/ptrace/peeksiginfo.c > https://github.com/checkpoint-restore/criu/blob/master/test/zdtm/static/sigpending.c > > Disclaimer: I'm the author of both of them. Looking at the kernel code the historical behavior has alwasy been to prefer the signal number passed in by the kernel. So sigh. Implmenet __copy_siginfo_from_user and __copy_siginfo_from_user32 to take that signal number and prefer it. The user of ptrace will still use copy_siginfo_from_user and copy_siginfo_from_user32 as they do not and never have had a signal number there. Luckily this change has never made it farther than linux-next. Fixes: e75dc036c445 ("signal: Fail sigqueueinfo if si_signo != sig") Reported-by: Andrei Vagin <avagin@gmail.com> Tested-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-10-05 07:02:48 +00:00
to->si_trapno = from->si_trapno;
signal: Unify and correct copy_siginfo_from_user32 The function copy_siginfo_from_user32 is used for two things, in ptrace since the dawn of siginfo for arbirarily modifying a signal that user space sees, and in sigqueueinfo to send a signal with arbirary siginfo data. Create a single copy of copy_siginfo_from_user32 that all architectures share, and teach it to handle all of the cases in the siginfo union. In the generic version of copy_siginfo_from_user32 ensure that all of the fields in siginfo are initialized so that the siginfo structure can be safely copied to userspace if necessary. When copying the embedded sigval union copy the si_int member. That ensures the 32bit values passes through the kernel unchanged. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-31 22:15:31 +00:00
#endif
signal: In sigqueueinfo prefer sig not si_signo Andrei Vagin <avagin@gmail.com> reported: > Accoding to the man page, the user should not set si_signo, it has to be set > by kernel. > > $ man 2 rt_sigqueueinfo > > The uinfo argument specifies the data to accompany the signal. This > argument is a pointer to a structure of type siginfo_t, described in > sigaction(2) (and defined by including <sigaction.h>). The caller > should set the following fields in this structure: > > si_code > This must be one of the SI_* codes in the Linux kernel source > file include/asm-generic/siginfo.h, with the restriction that > the code must be negative (i.e., cannot be SI_USER, which is > used by the kernel to indicate a signal sent by kill(2)) and > cannot (since Linux 2.6.39) be SI_TKILL (which is used by the > kernel to indicate a signal sent using tgkill(2)). > > si_pid This should be set to a process ID, typically the process ID of > the sender. > > si_uid This should be set to a user ID, typically the real user ID of > the sender. > > si_value > This field contains the user data to accompany the signal. For > more information, see the description of the last (union sigval) > argument of sigqueue(3). > > Internally, the kernel sets the si_signo field to the value specified > in sig, so that the receiver of the signal can also obtain the signal > number via that field. > > On Tue, Sep 25, 2018 at 07:19:02PM +0200, Eric W. Biederman wrote: >> >> If there is some application that calls sigqueueinfo directly that has >> a problem with this added sanity check we can revisit this when we see >> what kind of crazy that application is doing. > > > I already know two "applications" ;) > > https://github.com/torvalds/linux/blob/master/tools/testing/selftests/ptrace/peeksiginfo.c > https://github.com/checkpoint-restore/criu/blob/master/test/zdtm/static/sigpending.c > > Disclaimer: I'm the author of both of them. Looking at the kernel code the historical behavior has alwasy been to prefer the signal number passed in by the kernel. So sigh. Implmenet __copy_siginfo_from_user and __copy_siginfo_from_user32 to take that signal number and prefer it. The user of ptrace will still use copy_siginfo_from_user and copy_siginfo_from_user32 as they do not and never have had a signal number there. Luckily this change has never made it farther than linux-next. Fixes: e75dc036c445 ("signal: Fail sigqueueinfo if si_signo != sig") Reported-by: Andrei Vagin <avagin@gmail.com> Tested-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-10-05 07:02:48 +00:00
to->si_lower = compat_ptr(from->si_lower);
to->si_upper = compat_ptr(from->si_upper);
signal: Extend siginfo_layout with SIL_FAULT_{MCEERR|BNDERR|PKUERR} Update the siginfo_layout function and enum siginfo_layout to represent all of the possible field layouts of struct siginfo. This allows the uses of siginfo_layout in um and arm64 where they are testing for SIL_FAULT to be more accurate as this rules out the other cases. Further this allows the switch statements on siginfo_layout to be simpler if perhaps a little more wordy. Making it easier to understand what is actually going on. As SIL_FAULT_BNDERR and SIL_FAULT_PKUERR are never expected to appear in signalfd just treat them as SIL_FAULT. To include them would take 20 extra bytes an pretty much fill up what is left of signalfd_siginfo. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-04-25 01:59:47 +00:00
break;
case SIL_FAULT_PKUERR:
signal: In sigqueueinfo prefer sig not si_signo Andrei Vagin <avagin@gmail.com> reported: > Accoding to the man page, the user should not set si_signo, it has to be set > by kernel. > > $ man 2 rt_sigqueueinfo > > The uinfo argument specifies the data to accompany the signal. This > argument is a pointer to a structure of type siginfo_t, described in > sigaction(2) (and defined by including <sigaction.h>). The caller > should set the following fields in this structure: > > si_code > This must be one of the SI_* codes in the Linux kernel source > file include/asm-generic/siginfo.h, with the restriction that > the code must be negative (i.e., cannot be SI_USER, which is > used by the kernel to indicate a signal sent by kill(2)) and > cannot (since Linux 2.6.39) be SI_TKILL (which is used by the > kernel to indicate a signal sent using tgkill(2)). > > si_pid This should be set to a process ID, typically the process ID of > the sender. > > si_uid This should be set to a user ID, typically the real user ID of > the sender. > > si_value > This field contains the user data to accompany the signal. For > more information, see the description of the last (union sigval) > argument of sigqueue(3). > > Internally, the kernel sets the si_signo field to the value specified > in sig, so that the receiver of the signal can also obtain the signal > number via that field. > > On Tue, Sep 25, 2018 at 07:19:02PM +0200, Eric W. Biederman wrote: >> >> If there is some application that calls sigqueueinfo directly that has >> a problem with this added sanity check we can revisit this when we see >> what kind of crazy that application is doing. > > > I already know two "applications" ;) > > https://github.com/torvalds/linux/blob/master/tools/testing/selftests/ptrace/peeksiginfo.c > https://github.com/checkpoint-restore/criu/blob/master/test/zdtm/static/sigpending.c > > Disclaimer: I'm the author of both of them. Looking at the kernel code the historical behavior has alwasy been to prefer the signal number passed in by the kernel. So sigh. Implmenet __copy_siginfo_from_user and __copy_siginfo_from_user32 to take that signal number and prefer it. The user of ptrace will still use copy_siginfo_from_user and copy_siginfo_from_user32 as they do not and never have had a signal number there. Luckily this change has never made it farther than linux-next. Fixes: e75dc036c445 ("signal: Fail sigqueueinfo if si_signo != sig") Reported-by: Andrei Vagin <avagin@gmail.com> Tested-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-10-05 07:02:48 +00:00
to->si_addr = compat_ptr(from->si_addr);
signal: Extend siginfo_layout with SIL_FAULT_{MCEERR|BNDERR|PKUERR} Update the siginfo_layout function and enum siginfo_layout to represent all of the possible field layouts of struct siginfo. This allows the uses of siginfo_layout in um and arm64 where they are testing for SIL_FAULT to be more accurate as this rules out the other cases. Further this allows the switch statements on siginfo_layout to be simpler if perhaps a little more wordy. Making it easier to understand what is actually going on. As SIL_FAULT_BNDERR and SIL_FAULT_PKUERR are never expected to appear in signalfd just treat them as SIL_FAULT. To include them would take 20 extra bytes an pretty much fill up what is left of signalfd_siginfo. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-04-25 01:59:47 +00:00
#ifdef __ARCH_SI_TRAPNO
signal: In sigqueueinfo prefer sig not si_signo Andrei Vagin <avagin@gmail.com> reported: > Accoding to the man page, the user should not set si_signo, it has to be set > by kernel. > > $ man 2 rt_sigqueueinfo > > The uinfo argument specifies the data to accompany the signal. This > argument is a pointer to a structure of type siginfo_t, described in > sigaction(2) (and defined by including <sigaction.h>). The caller > should set the following fields in this structure: > > si_code > This must be one of the SI_* codes in the Linux kernel source > file include/asm-generic/siginfo.h, with the restriction that > the code must be negative (i.e., cannot be SI_USER, which is > used by the kernel to indicate a signal sent by kill(2)) and > cannot (since Linux 2.6.39) be SI_TKILL (which is used by the > kernel to indicate a signal sent using tgkill(2)). > > si_pid This should be set to a process ID, typically the process ID of > the sender. > > si_uid This should be set to a user ID, typically the real user ID of > the sender. > > si_value > This field contains the user data to accompany the signal. For > more information, see the description of the last (union sigval) > argument of sigqueue(3). > > Internally, the kernel sets the si_signo field to the value specified > in sig, so that the receiver of the signal can also obtain the signal > number via that field. > > On Tue, Sep 25, 2018 at 07:19:02PM +0200, Eric W. Biederman wrote: >> >> If there is some application that calls sigqueueinfo directly that has >> a problem with this added sanity check we can revisit this when we see >> what kind of crazy that application is doing. > > > I already know two "applications" ;) > > https://github.com/torvalds/linux/blob/master/tools/testing/selftests/ptrace/peeksiginfo.c > https://github.com/checkpoint-restore/criu/blob/master/test/zdtm/static/sigpending.c > > Disclaimer: I'm the author of both of them. Looking at the kernel code the historical behavior has alwasy been to prefer the signal number passed in by the kernel. So sigh. Implmenet __copy_siginfo_from_user and __copy_siginfo_from_user32 to take that signal number and prefer it. The user of ptrace will still use copy_siginfo_from_user and copy_siginfo_from_user32 as they do not and never have had a signal number there. Luckily this change has never made it farther than linux-next. Fixes: e75dc036c445 ("signal: Fail sigqueueinfo if si_signo != sig") Reported-by: Andrei Vagin <avagin@gmail.com> Tested-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-10-05 07:02:48 +00:00
to->si_trapno = from->si_trapno;
signal: Unify and correct copy_siginfo_from_user32 The function copy_siginfo_from_user32 is used for two things, in ptrace since the dawn of siginfo for arbirarily modifying a signal that user space sees, and in sigqueueinfo to send a signal with arbirary siginfo data. Create a single copy of copy_siginfo_from_user32 that all architectures share, and teach it to handle all of the cases in the siginfo union. In the generic version of copy_siginfo_from_user32 ensure that all of the fields in siginfo are initialized so that the siginfo structure can be safely copied to userspace if necessary. When copying the embedded sigval union copy the si_int member. That ensures the 32bit values passes through the kernel unchanged. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-31 22:15:31 +00:00
#endif
signal: In sigqueueinfo prefer sig not si_signo Andrei Vagin <avagin@gmail.com> reported: > Accoding to the man page, the user should not set si_signo, it has to be set > by kernel. > > $ man 2 rt_sigqueueinfo > > The uinfo argument specifies the data to accompany the signal. This > argument is a pointer to a structure of type siginfo_t, described in > sigaction(2) (and defined by including <sigaction.h>). The caller > should set the following fields in this structure: > > si_code > This must be one of the SI_* codes in the Linux kernel source > file include/asm-generic/siginfo.h, with the restriction that > the code must be negative (i.e., cannot be SI_USER, which is > used by the kernel to indicate a signal sent by kill(2)) and > cannot (since Linux 2.6.39) be SI_TKILL (which is used by the > kernel to indicate a signal sent using tgkill(2)). > > si_pid This should be set to a process ID, typically the process ID of > the sender. > > si_uid This should be set to a user ID, typically the real user ID of > the sender. > > si_value > This field contains the user data to accompany the signal. For > more information, see the description of the last (union sigval) > argument of sigqueue(3). > > Internally, the kernel sets the si_signo field to the value specified > in sig, so that the receiver of the signal can also obtain the signal > number via that field. > > On Tue, Sep 25, 2018 at 07:19:02PM +0200, Eric W. Biederman wrote: >> >> If there is some application that calls sigqueueinfo directly that has >> a problem with this added sanity check we can revisit this when we see >> what kind of crazy that application is doing. > > > I already know two "applications" ;) > > https://github.com/torvalds/linux/blob/master/tools/testing/selftests/ptrace/peeksiginfo.c > https://github.com/checkpoint-restore/criu/blob/master/test/zdtm/static/sigpending.c > > Disclaimer: I'm the author of both of them. Looking at the kernel code the historical behavior has alwasy been to prefer the signal number passed in by the kernel. So sigh. Implmenet __copy_siginfo_from_user and __copy_siginfo_from_user32 to take that signal number and prefer it. The user of ptrace will still use copy_siginfo_from_user and copy_siginfo_from_user32 as they do not and never have had a signal number there. Luckily this change has never made it farther than linux-next. Fixes: e75dc036c445 ("signal: Fail sigqueueinfo if si_signo != sig") Reported-by: Andrei Vagin <avagin@gmail.com> Tested-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-10-05 07:02:48 +00:00
to->si_pkey = from->si_pkey;
signal: Unify and correct copy_siginfo_from_user32 The function copy_siginfo_from_user32 is used for two things, in ptrace since the dawn of siginfo for arbirarily modifying a signal that user space sees, and in sigqueueinfo to send a signal with arbirary siginfo data. Create a single copy of copy_siginfo_from_user32 that all architectures share, and teach it to handle all of the cases in the siginfo union. In the generic version of copy_siginfo_from_user32 ensure that all of the fields in siginfo are initialized so that the siginfo structure can be safely copied to userspace if necessary. When copying the embedded sigval union copy the si_int member. That ensures the 32bit values passes through the kernel unchanged. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-31 22:15:31 +00:00
break;
case SIL_CHLD:
signal: In sigqueueinfo prefer sig not si_signo Andrei Vagin <avagin@gmail.com> reported: > Accoding to the man page, the user should not set si_signo, it has to be set > by kernel. > > $ man 2 rt_sigqueueinfo > > The uinfo argument specifies the data to accompany the signal. This > argument is a pointer to a structure of type siginfo_t, described in > sigaction(2) (and defined by including <sigaction.h>). The caller > should set the following fields in this structure: > > si_code > This must be one of the SI_* codes in the Linux kernel source > file include/asm-generic/siginfo.h, with the restriction that > the code must be negative (i.e., cannot be SI_USER, which is > used by the kernel to indicate a signal sent by kill(2)) and > cannot (since Linux 2.6.39) be SI_TKILL (which is used by the > kernel to indicate a signal sent using tgkill(2)). > > si_pid This should be set to a process ID, typically the process ID of > the sender. > > si_uid This should be set to a user ID, typically the real user ID of > the sender. > > si_value > This field contains the user data to accompany the signal. For > more information, see the description of the last (union sigval) > argument of sigqueue(3). > > Internally, the kernel sets the si_signo field to the value specified > in sig, so that the receiver of the signal can also obtain the signal > number via that field. > > On Tue, Sep 25, 2018 at 07:19:02PM +0200, Eric W. Biederman wrote: >> >> If there is some application that calls sigqueueinfo directly that has >> a problem with this added sanity check we can revisit this when we see >> what kind of crazy that application is doing. > > > I already know two "applications" ;) > > https://github.com/torvalds/linux/blob/master/tools/testing/selftests/ptrace/peeksiginfo.c > https://github.com/checkpoint-restore/criu/blob/master/test/zdtm/static/sigpending.c > > Disclaimer: I'm the author of both of them. Looking at the kernel code the historical behavior has alwasy been to prefer the signal number passed in by the kernel. So sigh. Implmenet __copy_siginfo_from_user and __copy_siginfo_from_user32 to take that signal number and prefer it. The user of ptrace will still use copy_siginfo_from_user and copy_siginfo_from_user32 as they do not and never have had a signal number there. Luckily this change has never made it farther than linux-next. Fixes: e75dc036c445 ("signal: Fail sigqueueinfo if si_signo != sig") Reported-by: Andrei Vagin <avagin@gmail.com> Tested-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-10-05 07:02:48 +00:00
to->si_pid = from->si_pid;
to->si_uid = from->si_uid;
to->si_status = from->si_status;
signal: Unify and correct copy_siginfo_from_user32 The function copy_siginfo_from_user32 is used for two things, in ptrace since the dawn of siginfo for arbirarily modifying a signal that user space sees, and in sigqueueinfo to send a signal with arbirary siginfo data. Create a single copy of copy_siginfo_from_user32 that all architectures share, and teach it to handle all of the cases in the siginfo union. In the generic version of copy_siginfo_from_user32 ensure that all of the fields in siginfo are initialized so that the siginfo structure can be safely copied to userspace if necessary. When copying the embedded sigval union copy the si_int member. That ensures the 32bit values passes through the kernel unchanged. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-31 22:15:31 +00:00
#ifdef CONFIG_X86_X32_ABI
if (in_x32_syscall()) {
signal: In sigqueueinfo prefer sig not si_signo Andrei Vagin <avagin@gmail.com> reported: > Accoding to the man page, the user should not set si_signo, it has to be set > by kernel. > > $ man 2 rt_sigqueueinfo > > The uinfo argument specifies the data to accompany the signal. This > argument is a pointer to a structure of type siginfo_t, described in > sigaction(2) (and defined by including <sigaction.h>). The caller > should set the following fields in this structure: > > si_code > This must be one of the SI_* codes in the Linux kernel source > file include/asm-generic/siginfo.h, with the restriction that > the code must be negative (i.e., cannot be SI_USER, which is > used by the kernel to indicate a signal sent by kill(2)) and > cannot (since Linux 2.6.39) be SI_TKILL (which is used by the > kernel to indicate a signal sent using tgkill(2)). > > si_pid This should be set to a process ID, typically the process ID of > the sender. > > si_uid This should be set to a user ID, typically the real user ID of > the sender. > > si_value > This field contains the user data to accompany the signal. For > more information, see the description of the last (union sigval) > argument of sigqueue(3). > > Internally, the kernel sets the si_signo field to the value specified > in sig, so that the receiver of the signal can also obtain the signal > number via that field. > > On Tue, Sep 25, 2018 at 07:19:02PM +0200, Eric W. Biederman wrote: >> >> If there is some application that calls sigqueueinfo directly that has >> a problem with this added sanity check we can revisit this when we see >> what kind of crazy that application is doing. > > > I already know two "applications" ;) > > https://github.com/torvalds/linux/blob/master/tools/testing/selftests/ptrace/peeksiginfo.c > https://github.com/checkpoint-restore/criu/blob/master/test/zdtm/static/sigpending.c > > Disclaimer: I'm the author of both of them. Looking at the kernel code the historical behavior has alwasy been to prefer the signal number passed in by the kernel. So sigh. Implmenet __copy_siginfo_from_user and __copy_siginfo_from_user32 to take that signal number and prefer it. The user of ptrace will still use copy_siginfo_from_user and copy_siginfo_from_user32 as they do not and never have had a signal number there. Luckily this change has never made it farther than linux-next. Fixes: e75dc036c445 ("signal: Fail sigqueueinfo if si_signo != sig") Reported-by: Andrei Vagin <avagin@gmail.com> Tested-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-10-05 07:02:48 +00:00
to->si_utime = from->_sifields._sigchld_x32._utime;
to->si_stime = from->_sifields._sigchld_x32._stime;
signal: Unify and correct copy_siginfo_from_user32 The function copy_siginfo_from_user32 is used for two things, in ptrace since the dawn of siginfo for arbirarily modifying a signal that user space sees, and in sigqueueinfo to send a signal with arbirary siginfo data. Create a single copy of copy_siginfo_from_user32 that all architectures share, and teach it to handle all of the cases in the siginfo union. In the generic version of copy_siginfo_from_user32 ensure that all of the fields in siginfo are initialized so that the siginfo structure can be safely copied to userspace if necessary. When copying the embedded sigval union copy the si_int member. That ensures the 32bit values passes through the kernel unchanged. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-31 22:15:31 +00:00
} else
#endif
{
signal: In sigqueueinfo prefer sig not si_signo Andrei Vagin <avagin@gmail.com> reported: > Accoding to the man page, the user should not set si_signo, it has to be set > by kernel. > > $ man 2 rt_sigqueueinfo > > The uinfo argument specifies the data to accompany the signal. This > argument is a pointer to a structure of type siginfo_t, described in > sigaction(2) (and defined by including <sigaction.h>). The caller > should set the following fields in this structure: > > si_code > This must be one of the SI_* codes in the Linux kernel source > file include/asm-generic/siginfo.h, with the restriction that > the code must be negative (i.e., cannot be SI_USER, which is > used by the kernel to indicate a signal sent by kill(2)) and > cannot (since Linux 2.6.39) be SI_TKILL (which is used by the > kernel to indicate a signal sent using tgkill(2)). > > si_pid This should be set to a process ID, typically the process ID of > the sender. > > si_uid This should be set to a user ID, typically the real user ID of > the sender. > > si_value > This field contains the user data to accompany the signal. For > more information, see the description of the last (union sigval) > argument of sigqueue(3). > > Internally, the kernel sets the si_signo field to the value specified > in sig, so that the receiver of the signal can also obtain the signal > number via that field. > > On Tue, Sep 25, 2018 at 07:19:02PM +0200, Eric W. Biederman wrote: >> >> If there is some application that calls sigqueueinfo directly that has >> a problem with this added sanity check we can revisit this when we see >> what kind of crazy that application is doing. > > > I already know two "applications" ;) > > https://github.com/torvalds/linux/blob/master/tools/testing/selftests/ptrace/peeksiginfo.c > https://github.com/checkpoint-restore/criu/blob/master/test/zdtm/static/sigpending.c > > Disclaimer: I'm the author of both of them. Looking at the kernel code the historical behavior has alwasy been to prefer the signal number passed in by the kernel. So sigh. Implmenet __copy_siginfo_from_user and __copy_siginfo_from_user32 to take that signal number and prefer it. The user of ptrace will still use copy_siginfo_from_user and copy_siginfo_from_user32 as they do not and never have had a signal number there. Luckily this change has never made it farther than linux-next. Fixes: e75dc036c445 ("signal: Fail sigqueueinfo if si_signo != sig") Reported-by: Andrei Vagin <avagin@gmail.com> Tested-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-10-05 07:02:48 +00:00
to->si_utime = from->si_utime;
to->si_stime = from->si_stime;
signal: Unify and correct copy_siginfo_from_user32 The function copy_siginfo_from_user32 is used for two things, in ptrace since the dawn of siginfo for arbirarily modifying a signal that user space sees, and in sigqueueinfo to send a signal with arbirary siginfo data. Create a single copy of copy_siginfo_from_user32 that all architectures share, and teach it to handle all of the cases in the siginfo union. In the generic version of copy_siginfo_from_user32 ensure that all of the fields in siginfo are initialized so that the siginfo structure can be safely copied to userspace if necessary. When copying the embedded sigval union copy the si_int member. That ensures the 32bit values passes through the kernel unchanged. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-31 22:15:31 +00:00
}
break;
case SIL_RT:
signal: In sigqueueinfo prefer sig not si_signo Andrei Vagin <avagin@gmail.com> reported: > Accoding to the man page, the user should not set si_signo, it has to be set > by kernel. > > $ man 2 rt_sigqueueinfo > > The uinfo argument specifies the data to accompany the signal. This > argument is a pointer to a structure of type siginfo_t, described in > sigaction(2) (and defined by including <sigaction.h>). The caller > should set the following fields in this structure: > > si_code > This must be one of the SI_* codes in the Linux kernel source > file include/asm-generic/siginfo.h, with the restriction that > the code must be negative (i.e., cannot be SI_USER, which is > used by the kernel to indicate a signal sent by kill(2)) and > cannot (since Linux 2.6.39) be SI_TKILL (which is used by the > kernel to indicate a signal sent using tgkill(2)). > > si_pid This should be set to a process ID, typically the process ID of > the sender. > > si_uid This should be set to a user ID, typically the real user ID of > the sender. > > si_value > This field contains the user data to accompany the signal. For > more information, see the description of the last (union sigval) > argument of sigqueue(3). > > Internally, the kernel sets the si_signo field to the value specified > in sig, so that the receiver of the signal can also obtain the signal > number via that field. > > On Tue, Sep 25, 2018 at 07:19:02PM +0200, Eric W. Biederman wrote: >> >> If there is some application that calls sigqueueinfo directly that has >> a problem with this added sanity check we can revisit this when we see >> what kind of crazy that application is doing. > > > I already know two "applications" ;) > > https://github.com/torvalds/linux/blob/master/tools/testing/selftests/ptrace/peeksiginfo.c > https://github.com/checkpoint-restore/criu/blob/master/test/zdtm/static/sigpending.c > > Disclaimer: I'm the author of both of them. Looking at the kernel code the historical behavior has alwasy been to prefer the signal number passed in by the kernel. So sigh. Implmenet __copy_siginfo_from_user and __copy_siginfo_from_user32 to take that signal number and prefer it. The user of ptrace will still use copy_siginfo_from_user and copy_siginfo_from_user32 as they do not and never have had a signal number there. Luckily this change has never made it farther than linux-next. Fixes: e75dc036c445 ("signal: Fail sigqueueinfo if si_signo != sig") Reported-by: Andrei Vagin <avagin@gmail.com> Tested-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-10-05 07:02:48 +00:00
to->si_pid = from->si_pid;
to->si_uid = from->si_uid;
to->si_int = from->si_int;
signal: Unify and correct copy_siginfo_from_user32 The function copy_siginfo_from_user32 is used for two things, in ptrace since the dawn of siginfo for arbirarily modifying a signal that user space sees, and in sigqueueinfo to send a signal with arbirary siginfo data. Create a single copy of copy_siginfo_from_user32 that all architectures share, and teach it to handle all of the cases in the siginfo union. In the generic version of copy_siginfo_from_user32 ensure that all of the fields in siginfo are initialized so that the siginfo structure can be safely copied to userspace if necessary. When copying the embedded sigval union copy the si_int member. That ensures the 32bit values passes through the kernel unchanged. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-31 22:15:31 +00:00
break;
case SIL_SYS:
signal: In sigqueueinfo prefer sig not si_signo Andrei Vagin <avagin@gmail.com> reported: > Accoding to the man page, the user should not set si_signo, it has to be set > by kernel. > > $ man 2 rt_sigqueueinfo > > The uinfo argument specifies the data to accompany the signal. This > argument is a pointer to a structure of type siginfo_t, described in > sigaction(2) (and defined by including <sigaction.h>). The caller > should set the following fields in this structure: > > si_code > This must be one of the SI_* codes in the Linux kernel source > file include/asm-generic/siginfo.h, with the restriction that > the code must be negative (i.e., cannot be SI_USER, which is > used by the kernel to indicate a signal sent by kill(2)) and > cannot (since Linux 2.6.39) be SI_TKILL (which is used by the > kernel to indicate a signal sent using tgkill(2)). > > si_pid This should be set to a process ID, typically the process ID of > the sender. > > si_uid This should be set to a user ID, typically the real user ID of > the sender. > > si_value > This field contains the user data to accompany the signal. For > more information, see the description of the last (union sigval) > argument of sigqueue(3). > > Internally, the kernel sets the si_signo field to the value specified > in sig, so that the receiver of the signal can also obtain the signal > number via that field. > > On Tue, Sep 25, 2018 at 07:19:02PM +0200, Eric W. Biederman wrote: >> >> If there is some application that calls sigqueueinfo directly that has >> a problem with this added sanity check we can revisit this when we see >> what kind of crazy that application is doing. > > > I already know two "applications" ;) > > https://github.com/torvalds/linux/blob/master/tools/testing/selftests/ptrace/peeksiginfo.c > https://github.com/checkpoint-restore/criu/blob/master/test/zdtm/static/sigpending.c > > Disclaimer: I'm the author of both of them. Looking at the kernel code the historical behavior has alwasy been to prefer the signal number passed in by the kernel. So sigh. Implmenet __copy_siginfo_from_user and __copy_siginfo_from_user32 to take that signal number and prefer it. The user of ptrace will still use copy_siginfo_from_user and copy_siginfo_from_user32 as they do not and never have had a signal number there. Luckily this change has never made it farther than linux-next. Fixes: e75dc036c445 ("signal: Fail sigqueueinfo if si_signo != sig") Reported-by: Andrei Vagin <avagin@gmail.com> Tested-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-10-05 07:02:48 +00:00
to->si_call_addr = compat_ptr(from->si_call_addr);
to->si_syscall = from->si_syscall;
to->si_arch = from->si_arch;
signal: Unify and correct copy_siginfo_from_user32 The function copy_siginfo_from_user32 is used for two things, in ptrace since the dawn of siginfo for arbirarily modifying a signal that user space sees, and in sigqueueinfo to send a signal with arbirary siginfo data. Create a single copy of copy_siginfo_from_user32 that all architectures share, and teach it to handle all of the cases in the siginfo union. In the generic version of copy_siginfo_from_user32 ensure that all of the fields in siginfo are initialized so that the siginfo structure can be safely copied to userspace if necessary. When copying the embedded sigval union copy the si_int member. That ensures the 32bit values passes through the kernel unchanged. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-31 22:15:31 +00:00
break;
}
return 0;
}
signal: In sigqueueinfo prefer sig not si_signo Andrei Vagin <avagin@gmail.com> reported: > Accoding to the man page, the user should not set si_signo, it has to be set > by kernel. > > $ man 2 rt_sigqueueinfo > > The uinfo argument specifies the data to accompany the signal. This > argument is a pointer to a structure of type siginfo_t, described in > sigaction(2) (and defined by including <sigaction.h>). The caller > should set the following fields in this structure: > > si_code > This must be one of the SI_* codes in the Linux kernel source > file include/asm-generic/siginfo.h, with the restriction that > the code must be negative (i.e., cannot be SI_USER, which is > used by the kernel to indicate a signal sent by kill(2)) and > cannot (since Linux 2.6.39) be SI_TKILL (which is used by the > kernel to indicate a signal sent using tgkill(2)). > > si_pid This should be set to a process ID, typically the process ID of > the sender. > > si_uid This should be set to a user ID, typically the real user ID of > the sender. > > si_value > This field contains the user data to accompany the signal. For > more information, see the description of the last (union sigval) > argument of sigqueue(3). > > Internally, the kernel sets the si_signo field to the value specified > in sig, so that the receiver of the signal can also obtain the signal > number via that field. > > On Tue, Sep 25, 2018 at 07:19:02PM +0200, Eric W. Biederman wrote: >> >> If there is some application that calls sigqueueinfo directly that has >> a problem with this added sanity check we can revisit this when we see >> what kind of crazy that application is doing. > > > I already know two "applications" ;) > > https://github.com/torvalds/linux/blob/master/tools/testing/selftests/ptrace/peeksiginfo.c > https://github.com/checkpoint-restore/criu/blob/master/test/zdtm/static/sigpending.c > > Disclaimer: I'm the author of both of them. Looking at the kernel code the historical behavior has alwasy been to prefer the signal number passed in by the kernel. So sigh. Implmenet __copy_siginfo_from_user and __copy_siginfo_from_user32 to take that signal number and prefer it. The user of ptrace will still use copy_siginfo_from_user and copy_siginfo_from_user32 as they do not and never have had a signal number there. Luckily this change has never made it farther than linux-next. Fixes: e75dc036c445 ("signal: Fail sigqueueinfo if si_signo != sig") Reported-by: Andrei Vagin <avagin@gmail.com> Tested-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-10-05 07:02:48 +00:00
static int __copy_siginfo_from_user32(int signo, struct kernel_siginfo *to,
const struct compat_siginfo __user *ufrom)
{
struct compat_siginfo from;
if (copy_from_user(&from, ufrom, sizeof(struct compat_siginfo)))
return -EFAULT;
from.si_signo = signo;
return post_copy_siginfo_from_user32(to, &from);
}
int copy_siginfo_from_user32(struct kernel_siginfo *to,
const struct compat_siginfo __user *ufrom)
{
struct compat_siginfo from;
if (copy_from_user(&from, ufrom, sizeof(struct compat_siginfo)))
return -EFAULT;
return post_copy_siginfo_from_user32(to, &from);
}
signal: Unify and correct copy_siginfo_from_user32 The function copy_siginfo_from_user32 is used for two things, in ptrace since the dawn of siginfo for arbirarily modifying a signal that user space sees, and in sigqueueinfo to send a signal with arbirary siginfo data. Create a single copy of copy_siginfo_from_user32 that all architectures share, and teach it to handle all of the cases in the siginfo union. In the generic version of copy_siginfo_from_user32 ensure that all of the fields in siginfo are initialized so that the siginfo structure can be safely copied to userspace if necessary. When copying the embedded sigval union copy the si_int member. That ensures the 32bit values passes through the kernel unchanged. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-31 22:15:31 +00:00
#endif /* CONFIG_COMPAT */
signal: introduce do_sigtimedwait() to factor out compat/native code Factor out the common code in sys_rt_sigtimedwait/compat_sys_rt_sigtimedwait to the new helper, do_sigtimedwait(). Add the comment to document the extra tick we add to timespec_to_jiffies(ts), thanks to Linus who explained this to me. Perhaps it would be better to move compat_sys_rt_sigtimedwait() into signal.c under CONFIG_COMPAT, then we can make do_sigtimedwait() static. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com>
2011-04-27 19:44:14 +00:00
/**
* do_sigtimedwait - wait for queued signals specified in @which
* @which: queued signals to wait for
* @info: if non-null, the signal's siginfo is returned here
* @ts: upper bound on process time suspension
*/
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
static int do_sigtimedwait(const sigset_t *which, kernel_siginfo_t *info,
y2038: signal: Change rt_sigtimedwait to use __kernel_timespec This changes sys_rt_sigtimedwait() to use get_timespec64(), changing the timeout type to __kernel_timespec, which will be changed to use a 64-bit time_t in the future. Since the do_sigtimedwait() core function changes, we also have to modify the compat version of this system call in the same way. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-04-18 13:56:13 +00:00
const struct timespec64 *ts)
signal: introduce do_sigtimedwait() to factor out compat/native code Factor out the common code in sys_rt_sigtimedwait/compat_sys_rt_sigtimedwait to the new helper, do_sigtimedwait(). Add the comment to document the extra tick we add to timespec_to_jiffies(ts), thanks to Linus who explained this to me. Perhaps it would be better to move compat_sys_rt_sigtimedwait() into signal.c under CONFIG_COMPAT, then we can make do_sigtimedwait() static. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com>
2011-04-27 19:44:14 +00:00
{
ktime: Get rid of the union ktime is a union because the initial implementation stored the time in scalar nanoseconds on 64 bit machine and in a endianess optimized timespec variant for 32bit machines. The Y2038 cleanup removed the timespec variant and switched everything to scalar nanoseconds. The union remained, but become completely pointless. Get rid of the union and just keep ktime_t as simple typedef of type s64. The conversion was done with coccinelle and some manual mopping up. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
2016-12-25 10:38:40 +00:00
ktime_t *to = NULL, timeout = KTIME_MAX;
signal: introduce do_sigtimedwait() to factor out compat/native code Factor out the common code in sys_rt_sigtimedwait/compat_sys_rt_sigtimedwait to the new helper, do_sigtimedwait(). Add the comment to document the extra tick we add to timespec_to_jiffies(ts), thanks to Linus who explained this to me. Perhaps it would be better to move compat_sys_rt_sigtimedwait() into signal.c under CONFIG_COMPAT, then we can make do_sigtimedwait() static. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com>
2011-04-27 19:44:14 +00:00
struct task_struct *tsk = current;
sigset_t mask = *which;
signals: Use hrtimer for sigtimedwait() We've converted most timeout related syscalls to hrtimers, but sigtimedwait() did not get this treatment. Convert it so we get a reasonable accuracy and remove the user space exposure to the timer wheel properties. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Chris Mason <clm@fb.com> Cc: Cyril Hrubis <chrubis@suse.cz> Cc: George Spelvin <linux@sciencehorizons.net> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Len Brown <lenb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160704094341.787164909@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-04 09:50:25 +00:00
int sig, ret = 0;
signal: introduce do_sigtimedwait() to factor out compat/native code Factor out the common code in sys_rt_sigtimedwait/compat_sys_rt_sigtimedwait to the new helper, do_sigtimedwait(). Add the comment to document the extra tick we add to timespec_to_jiffies(ts), thanks to Linus who explained this to me. Perhaps it would be better to move compat_sys_rt_sigtimedwait() into signal.c under CONFIG_COMPAT, then we can make do_sigtimedwait() static. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com>
2011-04-27 19:44:14 +00:00
if (ts) {
y2038: signal: Change rt_sigtimedwait to use __kernel_timespec This changes sys_rt_sigtimedwait() to use get_timespec64(), changing the timeout type to __kernel_timespec, which will be changed to use a 64-bit time_t in the future. Since the do_sigtimedwait() core function changes, we also have to modify the compat version of this system call in the same way. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-04-18 13:56:13 +00:00
if (!timespec64_valid(ts))
signal: introduce do_sigtimedwait() to factor out compat/native code Factor out the common code in sys_rt_sigtimedwait/compat_sys_rt_sigtimedwait to the new helper, do_sigtimedwait(). Add the comment to document the extra tick we add to timespec_to_jiffies(ts), thanks to Linus who explained this to me. Perhaps it would be better to move compat_sys_rt_sigtimedwait() into signal.c under CONFIG_COMPAT, then we can make do_sigtimedwait() static. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com>
2011-04-27 19:44:14 +00:00
return -EINVAL;
y2038: signal: Change rt_sigtimedwait to use __kernel_timespec This changes sys_rt_sigtimedwait() to use get_timespec64(), changing the timeout type to __kernel_timespec, which will be changed to use a 64-bit time_t in the future. Since the do_sigtimedwait() core function changes, we also have to modify the compat version of this system call in the same way. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-04-18 13:56:13 +00:00
timeout = timespec64_to_ktime(*ts);
signals: Use hrtimer for sigtimedwait() We've converted most timeout related syscalls to hrtimers, but sigtimedwait() did not get this treatment. Convert it so we get a reasonable accuracy and remove the user space exposure to the timer wheel properties. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Chris Mason <clm@fb.com> Cc: Cyril Hrubis <chrubis@suse.cz> Cc: George Spelvin <linux@sciencehorizons.net> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Len Brown <lenb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160704094341.787164909@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-04 09:50:25 +00:00
to = &timeout;
signal: introduce do_sigtimedwait() to factor out compat/native code Factor out the common code in sys_rt_sigtimedwait/compat_sys_rt_sigtimedwait to the new helper, do_sigtimedwait(). Add the comment to document the extra tick we add to timespec_to_jiffies(ts), thanks to Linus who explained this to me. Perhaps it would be better to move compat_sys_rt_sigtimedwait() into signal.c under CONFIG_COMPAT, then we can make do_sigtimedwait() static. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com>
2011-04-27 19:44:14 +00:00
}
/*
* Invert the set of allowed signals to get those we want to block.
*/
sigdelsetmask(&mask, sigmask(SIGKILL) | sigmask(SIGSTOP));
signotset(&mask);
spin_lock_irq(&tsk->sighand->siglock);
sig = dequeue_signal(tsk, &mask, info);
ktime: Get rid of the union ktime is a union because the initial implementation stored the time in scalar nanoseconds on 64 bit machine and in a endianess optimized timespec variant for 32bit machines. The Y2038 cleanup removed the timespec variant and switched everything to scalar nanoseconds. The union remained, but become completely pointless. Get rid of the union and just keep ktime_t as simple typedef of type s64. The conversion was done with coccinelle and some manual mopping up. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
2016-12-25 10:38:40 +00:00
if (!sig && timeout) {
signal: introduce do_sigtimedwait() to factor out compat/native code Factor out the common code in sys_rt_sigtimedwait/compat_sys_rt_sigtimedwait to the new helper, do_sigtimedwait(). Add the comment to document the extra tick we add to timespec_to_jiffies(ts), thanks to Linus who explained this to me. Perhaps it would be better to move compat_sys_rt_sigtimedwait() into signal.c under CONFIG_COMPAT, then we can make do_sigtimedwait() static. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com>
2011-04-27 19:44:14 +00:00
/*
* None ready, temporarily unblock those we're interested
* while we are sleeping in so that we'll be awakened when
signal: do_sigtimedwait() needs retarget_shared_pending() do_sigtimedwait() changes current->blocked and thus it needs set_current_blocked()->retarget_shared_pending(). We could use set_current_blocked() directly. It is fine to change ->real_blocked from all-zeroes to ->blocked and vice versa lockless, but this is not immediately clear, looks racy, and needs a huge comment to explain why this is correct. To keep the things simple this patch adds the new static helper, __set_task_blocked() which should be called with ->siglock held. This way we can change both ->real_blocked and ->blocked atomically under ->siglock as the current code does. This is more understandable. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com>
2011-04-27 19:56:14 +00:00
* they arrive. Unblocking is always fine, we can avoid
* set_current_blocked().
signal: introduce do_sigtimedwait() to factor out compat/native code Factor out the common code in sys_rt_sigtimedwait/compat_sys_rt_sigtimedwait to the new helper, do_sigtimedwait(). Add the comment to document the extra tick we add to timespec_to_jiffies(ts), thanks to Linus who explained this to me. Perhaps it would be better to move compat_sys_rt_sigtimedwait() into signal.c under CONFIG_COMPAT, then we can make do_sigtimedwait() static. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com>
2011-04-27 19:44:14 +00:00
*/
tsk->real_blocked = tsk->blocked;
sigandsets(&tsk->blocked, &tsk->blocked, &mask);
recalc_sigpending();
spin_unlock_irq(&tsk->sighand->siglock);
signals: Use hrtimer for sigtimedwait() We've converted most timeout related syscalls to hrtimers, but sigtimedwait() did not get this treatment. Convert it so we get a reasonable accuracy and remove the user space exposure to the timer wheel properties. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Chris Mason <clm@fb.com> Cc: Cyril Hrubis <chrubis@suse.cz> Cc: George Spelvin <linux@sciencehorizons.net> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Len Brown <lenb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160704094341.787164909@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-04 09:50:25 +00:00
__set_current_state(TASK_INTERRUPTIBLE);
ret = freezable_schedule_hrtimeout_range(to, tsk->timer_slack_ns,
HRTIMER_MODE_REL);
signal: introduce do_sigtimedwait() to factor out compat/native code Factor out the common code in sys_rt_sigtimedwait/compat_sys_rt_sigtimedwait to the new helper, do_sigtimedwait(). Add the comment to document the extra tick we add to timespec_to_jiffies(ts), thanks to Linus who explained this to me. Perhaps it would be better to move compat_sys_rt_sigtimedwait() into signal.c under CONFIG_COMPAT, then we can make do_sigtimedwait() static. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com>
2011-04-27 19:44:14 +00:00
spin_lock_irq(&tsk->sighand->siglock);
signal: do_sigtimedwait() needs retarget_shared_pending() do_sigtimedwait() changes current->blocked and thus it needs set_current_blocked()->retarget_shared_pending(). We could use set_current_blocked() directly. It is fine to change ->real_blocked from all-zeroes to ->blocked and vice versa lockless, but this is not immediately clear, looks racy, and needs a huge comment to explain why this is correct. To keep the things simple this patch adds the new static helper, __set_task_blocked() which should be called with ->siglock held. This way we can change both ->real_blocked and ->blocked atomically under ->siglock as the current code does. This is more understandable. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com>
2011-04-27 19:56:14 +00:00
__set_task_blocked(tsk, &tsk->real_blocked);
signals: s/siginitset/sigemptyset/ in do_sigtimedwait() Cosmetic, but siginitset(0) looks a bit strange, sigemptyset() is what do_sigtimedwait() needs. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Richard Weinberger <richard@nod.at> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 21:36:46 +00:00
sigemptyset(&tsk->real_blocked);
signal: do_sigtimedwait() needs retarget_shared_pending() do_sigtimedwait() changes current->blocked and thus it needs set_current_blocked()->retarget_shared_pending(). We could use set_current_blocked() directly. It is fine to change ->real_blocked from all-zeroes to ->blocked and vice versa lockless, but this is not immediately clear, looks racy, and needs a huge comment to explain why this is correct. To keep the things simple this patch adds the new static helper, __set_task_blocked() which should be called with ->siglock held. This way we can change both ->real_blocked and ->blocked atomically under ->siglock as the current code does. This is more understandable. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com>
2011-04-27 19:56:14 +00:00
sig = dequeue_signal(tsk, &mask, info);
signal: introduce do_sigtimedwait() to factor out compat/native code Factor out the common code in sys_rt_sigtimedwait/compat_sys_rt_sigtimedwait to the new helper, do_sigtimedwait(). Add the comment to document the extra tick we add to timespec_to_jiffies(ts), thanks to Linus who explained this to me. Perhaps it would be better to move compat_sys_rt_sigtimedwait() into signal.c under CONFIG_COMPAT, then we can make do_sigtimedwait() static. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com>
2011-04-27 19:44:14 +00:00
}
spin_unlock_irq(&tsk->sighand->siglock);
if (sig)
return sig;
signals: Use hrtimer for sigtimedwait() We've converted most timeout related syscalls to hrtimers, but sigtimedwait() did not get this treatment. Convert it so we get a reasonable accuracy and remove the user space exposure to the timer wheel properties. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Chris Mason <clm@fb.com> Cc: Cyril Hrubis <chrubis@suse.cz> Cc: George Spelvin <linux@sciencehorizons.net> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Len Brown <lenb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160704094341.787164909@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-04 09:50:25 +00:00
return ret ? -EINTR : -EAGAIN;
signal: introduce do_sigtimedwait() to factor out compat/native code Factor out the common code in sys_rt_sigtimedwait/compat_sys_rt_sigtimedwait to the new helper, do_sigtimedwait(). Add the comment to document the extra tick we add to timespec_to_jiffies(ts), thanks to Linus who explained this to me. Perhaps it would be better to move compat_sys_rt_sigtimedwait() into signal.c under CONFIG_COMPAT, then we can make do_sigtimedwait() static. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com>
2011-04-27 19:44:14 +00:00
}
kernel/signal.c: add kernel-doc notation to syscalls Add kernel-doc to syscalls in signal.c. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-04 22:00:26 +00:00
/**
* sys_rt_sigtimedwait - synchronously wait for queued signals specified
* in @uthese
* @uthese: queued signals to wait for
* @uinfo: if non-null, the signal's siginfo is returned here
* @uts: upper bound on process time suspension
* @sigsetsize: size of sigset_t type
*/
[CVE-2009-0029] System call wrappers part 08 Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 13:14:10 +00:00
SYSCALL_DEFINE4(rt_sigtimedwait, const sigset_t __user *, uthese,
y2038: signal: Change rt_sigtimedwait to use __kernel_timespec This changes sys_rt_sigtimedwait() to use get_timespec64(), changing the timeout type to __kernel_timespec, which will be changed to use a 64-bit time_t in the future. Since the do_sigtimedwait() core function changes, we also have to modify the compat version of this system call in the same way. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-04-18 13:56:13 +00:00
siginfo_t __user *, uinfo,
const struct __kernel_timespec __user *, uts,
[CVE-2009-0029] System call wrappers part 08 Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 13:14:10 +00:00
size_t, sigsetsize)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
sigset_t these;
y2038: signal: Change rt_sigtimedwait to use __kernel_timespec This changes sys_rt_sigtimedwait() to use get_timespec64(), changing the timeout type to __kernel_timespec, which will be changed to use a 64-bit time_t in the future. Since the do_sigtimedwait() core function changes, we also have to modify the compat version of this system call in the same way. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-04-18 13:56:13 +00:00
struct timespec64 ts;
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
kernel_siginfo_t info;
signal: introduce do_sigtimedwait() to factor out compat/native code Factor out the common code in sys_rt_sigtimedwait/compat_sys_rt_sigtimedwait to the new helper, do_sigtimedwait(). Add the comment to document the extra tick we add to timespec_to_jiffies(ts), thanks to Linus who explained this to me. Perhaps it would be better to move compat_sys_rt_sigtimedwait() into signal.c under CONFIG_COMPAT, then we can make do_sigtimedwait() static. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com>
2011-04-27 19:44:14 +00:00
int ret;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* XXX: Don't preclude handling different sized sigset_t's. */
if (sigsetsize != sizeof(sigset_t))
return -EINVAL;
if (copy_from_user(&these, uthese, sizeof(these)))
return -EFAULT;
kernel/signal.c: fix typos and coding style General coding style and comment fixes; no code changes: - Use multi-line-comment coding style. - Put some function signatures completely on one line. - Hyphenate some words. - Spell Posix as POSIX. - Correct typos & spellos in some comments. - Drop trailing whitespace. - End sentences with periods. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-04 21:59:31 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (uts) {
y2038: signal: Change rt_sigtimedwait to use __kernel_timespec This changes sys_rt_sigtimedwait() to use get_timespec64(), changing the timeout type to __kernel_timespec, which will be changed to use a 64-bit time_t in the future. Since the do_sigtimedwait() core function changes, we also have to modify the compat version of this system call in the same way. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-04-18 13:56:13 +00:00
if (get_timespec64(&ts, uts))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return -EFAULT;
}
signal: introduce do_sigtimedwait() to factor out compat/native code Factor out the common code in sys_rt_sigtimedwait/compat_sys_rt_sigtimedwait to the new helper, do_sigtimedwait(). Add the comment to document the extra tick we add to timespec_to_jiffies(ts), thanks to Linus who explained this to me. Perhaps it would be better to move compat_sys_rt_sigtimedwait() into signal.c under CONFIG_COMPAT, then we can make do_sigtimedwait() static. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com>
2011-04-27 19:44:14 +00:00
ret = do_sigtimedwait(&these, &info, uts ? &ts : NULL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
signal: introduce do_sigtimedwait() to factor out compat/native code Factor out the common code in sys_rt_sigtimedwait/compat_sys_rt_sigtimedwait to the new helper, do_sigtimedwait(). Add the comment to document the extra tick we add to timespec_to_jiffies(ts), thanks to Linus who explained this to me. Perhaps it would be better to move compat_sys_rt_sigtimedwait() into signal.c under CONFIG_COMPAT, then we can make do_sigtimedwait() static. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com>
2011-04-27 19:44:14 +00:00
if (ret > 0 && uinfo) {
if (copy_siginfo_to_user(uinfo, &info))
ret = -EFAULT;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
return ret;
}
y2038: signal: Add sys_rt_sigtimedwait_time32 Once sys_rt_sigtimedwait() gets changed to a 64-bit time_t, we have to provide compatibility support for existing binaries. An earlier version of this patch reused the compat_sys_rt_sigtimedwait entry point to avoid code duplication, but this newer approach duplicates the existing native entry point instead, which seems a bit cleaner. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-04-18 14:15:37 +00:00
#ifdef CONFIG_COMPAT_32BIT_TIME
SYSCALL_DEFINE4(rt_sigtimedwait_time32, const sigset_t __user *, uthese,
siginfo_t __user *, uinfo,
const struct old_timespec32 __user *, uts,
size_t, sigsetsize)
{
sigset_t these;
struct timespec64 ts;
kernel_siginfo_t info;
int ret;
if (sigsetsize != sizeof(sigset_t))
return -EINVAL;
if (copy_from_user(&these, uthese, sizeof(these)))
return -EFAULT;
if (uts) {
if (get_old_timespec32(&ts, uts))
return -EFAULT;
}
ret = do_sigtimedwait(&these, &info, uts ? &ts : NULL);
if (ret > 0 && uinfo) {
if (copy_siginfo_to_user(uinfo, &info))
ret = -EFAULT;
}
return ret;
}
#endif
rt_sigtimedwait(): move compat to native Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-05-31 08:46:17 +00:00
#ifdef CONFIG_COMPAT
y2038: signal: Add compat_sys_rt_sigtimedwait_time64 Now that 32-bit architectures have two variants of sys_rt_sigtimedwaid() for 32-bit and 64-bit time_t, we also need to have a second compat system call entry point on the corresponding 64-bit architectures. The traditional system call keeps getting handled by compat_sys_rt_sigtimedwait(), and this adds a new compat_sys_rt_sigtimedwait_time64() that differs only in the timeout argument type. The naming remains a bit asymmetric for the moment. Ideally we would want to have compat_sys_rt_sigtimedwait_time32() for the old version and compat_sys_rt_sigtimedwait() for the new one to mirror the names of the native entry points, but renaming the existing system call tables causes unnecessary churn. I would suggest renaming all such system calls together at a later point. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-04-18 14:18:35 +00:00
COMPAT_SYSCALL_DEFINE4(rt_sigtimedwait_time64, compat_sigset_t __user *, uthese,
struct compat_siginfo __user *, uinfo,
struct __kernel_timespec __user *, uts, compat_size_t, sigsetsize)
{
sigset_t s;
struct timespec64 t;
kernel_siginfo_t info;
long ret;
if (sigsetsize != sizeof(sigset_t))
return -EINVAL;
if (get_compat_sigset(&s, uthese))
return -EFAULT;
if (uts) {
if (get_timespec64(&t, uts))
return -EFAULT;
}
ret = do_sigtimedwait(&s, &info, uts ? &t : NULL);
if (ret > 0 && uinfo) {
if (copy_siginfo_to_user32(uinfo, &info))
ret = -EFAULT;
}
return ret;
}
#ifdef CONFIG_COMPAT_32BIT_TIME
y2038: syscalls: rename y2038 compat syscalls A lot of system calls that pass a time_t somewhere have an implementation using a COMPAT_SYSCALL_DEFINEx() on 64-bit architectures, and have been reworked so that this implementation can now be used on 32-bit architectures as well. The missing step is to redefine them using the regular SYSCALL_DEFINEx() to get them out of the compat namespace and make it possible to build them on 32-bit architectures. Any system call that ends in 'time' gets a '32' suffix on its name for that version, while the others get a '_time32' suffix, to distinguish them from the normal version, which takes a 64-bit time argument in the future. In this step, only 64-bit architectures are changed, doing this rename first lets us avoid touching the 32-bit architectures twice. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-01-06 23:33:08 +00:00
COMPAT_SYSCALL_DEFINE4(rt_sigtimedwait_time32, compat_sigset_t __user *, uthese,
rt_sigtimedwait(): move compat to native Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-05-31 08:46:17 +00:00
struct compat_siginfo __user *, uinfo,
y2038: globally rename compat_time to old_time32 Christoph Hellwig suggested a slightly different path for handling backwards compatibility with the 32-bit time_t based system calls: Rather than simply reusing the compat_sys_* entry points on 32-bit architectures unchanged, we get rid of those entry points and the compat_time types by renaming them to something that makes more sense on 32-bit architectures (which don't have a compat mode otherwise), and then share the entry points under the new name with the 64-bit architectures that use them for implementing the compatibility. The following types and interfaces are renamed here, and moved from linux/compat_time.h to linux/time32.h: old new --- --- compat_time_t old_time32_t struct compat_timeval struct old_timeval32 struct compat_timespec struct old_timespec32 struct compat_itimerspec struct old_itimerspec32 ns_to_compat_timeval() ns_to_old_timeval32() get_compat_itimerspec64() get_old_itimerspec32() put_compat_itimerspec64() put_old_itimerspec32() compat_get_timespec64() get_old_timespec32() compat_put_timespec64() put_old_timespec32() As we already have aliases in place, this patch addresses only the instances that are relevant to the system call interface in particular, not those that occur in device drivers and other modules. Those will get handled separately, while providing the 64-bit version of the respective interfaces. I'm not renaming the timex, rusage and itimerval structures, as we are still debating what the new interface will look like, and whether we will need a replacement at all. This also doesn't change the names of the syscall entry points, which can be done more easily when we actually switch over the 32-bit architectures to use them, at that point we need to change COMPAT_SYSCALL_DEFINEx to SYSCALL_DEFINEx with a new name, e.g. with a _time32 suffix. Suggested-by: Christoph Hellwig <hch@infradead.org> Link: https://lore.kernel.org/lkml/20180705222110.GA5698@infradead.org/ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-07-13 10:52:28 +00:00
struct old_timespec32 __user *, uts, compat_size_t, sigsetsize)
rt_sigtimedwait(): move compat to native Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-05-31 08:46:17 +00:00
{
sigset_t s;
y2038: signal: Change rt_sigtimedwait to use __kernel_timespec This changes sys_rt_sigtimedwait() to use get_timespec64(), changing the timeout type to __kernel_timespec, which will be changed to use a 64-bit time_t in the future. Since the do_sigtimedwait() core function changes, we also have to modify the compat version of this system call in the same way. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-04-18 13:56:13 +00:00
struct timespec64 t;
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
kernel_siginfo_t info;
rt_sigtimedwait(): move compat to native Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-05-31 08:46:17 +00:00
long ret;
if (sigsetsize != sizeof(sigset_t))
return -EINVAL;
get_compat_sigset() similar to put_compat_sigset() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-09-04 01:45:17 +00:00
if (get_compat_sigset(&s, uthese))
rt_sigtimedwait(): move compat to native Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-05-31 08:46:17 +00:00
return -EFAULT;
if (uts) {
y2038: signal: Change rt_sigtimedwait to use __kernel_timespec This changes sys_rt_sigtimedwait() to use get_timespec64(), changing the timeout type to __kernel_timespec, which will be changed to use a 64-bit time_t in the future. Since the do_sigtimedwait() core function changes, we also have to modify the compat version of this system call in the same way. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-04-18 13:56:13 +00:00
if (get_old_timespec32(&t, uts))
rt_sigtimedwait(): move compat to native Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-05-31 08:46:17 +00:00
return -EFAULT;
}
ret = do_sigtimedwait(&s, &info, uts ? &t : NULL);
if (ret > 0 && uinfo) {
if (copy_siginfo_to_user32(uinfo, &info))
ret = -EFAULT;
}
return ret;
}
#endif
y2038: signal: Add compat_sys_rt_sigtimedwait_time64 Now that 32-bit architectures have two variants of sys_rt_sigtimedwaid() for 32-bit and 64-bit time_t, we also need to have a second compat system call entry point on the corresponding 64-bit architectures. The traditional system call keeps getting handled by compat_sys_rt_sigtimedwait(), and this adds a new compat_sys_rt_sigtimedwait_time64() that differs only in the timeout argument type. The naming remains a bit asymmetric for the moment. Ideally we would want to have compat_sys_rt_sigtimedwait_time32() for the old version and compat_sys_rt_sigtimedwait() for the new one to mirror the names of the native entry points, but renaming the existing system call tables causes unnecessary churn. I would suggest renaming all such system calls together at a later point. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-04-18 14:18:35 +00:00
#endif
rt_sigtimedwait(): move compat to native Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-05-31 08:46:17 +00:00
signal: add pidfd_send_signal() syscall The kill() syscall operates on process identifiers (pid). After a process has exited its pid can be reused by another process. If a caller sends a signal to a reused pid it will end up signaling the wrong process. This issue has often surfaced and there has been a push to address this problem [1]. This patch uses file descriptors (fd) from proc/<pid> as stable handles on struct pid. Even if a pid is recycled the handle will not change. The fd can be used to send signals to the process it refers to. Thus, the new syscall pidfd_send_signal() is introduced to solve this problem. Instead of pids it operates on process fds (pidfd). /* prototype and argument /* long pidfd_send_signal(int pidfd, int sig, siginfo_t *info, unsigned int flags); /* syscall number 424 */ The syscall number was chosen to be 424 to align with Arnd's rework in his y2038 to minimize merge conflicts (cf. [25]). In addition to the pidfd and signal argument it takes an additional siginfo_t and flags argument. If the siginfo_t argument is NULL then pidfd_send_signal() is equivalent to kill(<positive-pid>, <signal>). If it is not NULL pidfd_send_signal() is equivalent to rt_sigqueueinfo(). The flags argument is added to allow for future extensions of this syscall. It currently needs to be passed as 0. Failing to do so will cause EINVAL. /* pidfd_send_signal() replaces multiple pid-based syscalls */ The pidfd_send_signal() syscall currently takes on the job of rt_sigqueueinfo(2) and parts of the functionality of kill(2), Namely, when a positive pid is passed to kill(2). It will however be possible to also replace tgkill(2) and rt_tgsigqueueinfo(2) if this syscall is extended. /* sending signals to threads (tid) and process groups (pgid) */ Specifically, the pidfd_send_signal() syscall does currently not operate on process groups or threads. This is left for future extensions. In order to extend the syscall to allow sending signal to threads and process groups appropriately named flags (e.g. PIDFD_TYPE_PGID, and PIDFD_TYPE_TID) should be added. This implies that the flags argument will determine what is signaled and not the file descriptor itself. Put in other words, grouping in this api is a property of the flags argument not a property of the file descriptor (cf. [13]). Clarification for this has been requested by Eric (cf. [19]). When appropriate extensions through the flags argument are added then pidfd_send_signal() can additionally replace the part of kill(2) which operates on process groups as well as the tgkill(2) and rt_tgsigqueueinfo(2) syscalls. How such an extension could be implemented has been very roughly sketched in [14], [15], and [16]. However, this should not be taken as a commitment to a particular implementation. There might be better ways to do it. Right now this is intentionally left out to keep this patchset as simple as possible (cf. [4]). /* naming */ The syscall had various names throughout iterations of this patchset: - procfd_signal() - procfd_send_signal() - taskfd_send_signal() In the last round of reviews it was pointed out that given that if the flags argument decides the scope of the signal instead of different types of fds it might make sense to either settle for "procfd_" or "pidfd_" as prefix. The community was willing to accept either (cf. [17] and [18]). Given that one developer expressed strong preference for the "pidfd_" prefix (cf. [13]) and with other developers less opinionated about the name we should settle for "pidfd_" to avoid further bikeshedding. The "_send_signal" suffix was chosen to reflect the fact that the syscall takes on the job of multiple syscalls. It is therefore intentional that the name is not reminiscent of neither kill(2) nor rt_sigqueueinfo(2). Not the fomer because it might imply that pidfd_send_signal() is a replacement for kill(2), and not the latter because it is a hassle to remember the correct spelling - especially for non-native speakers - and because it is not descriptive enough of what the syscall actually does. The name "pidfd_send_signal" makes it very clear that its job is to send signals. /* zombies */ Zombies can be signaled just as any other process. No special error will be reported since a zombie state is an unreliable state (cf. [3]). However, this can be added as an extension through the @flags argument if the need ever arises. /* cross-namespace signals */ The patch currently enforces that the signaler and signalee either are in the same pid namespace or that the signaler's pid namespace is an ancestor of the signalee's pid namespace. This is done for the sake of simplicity and because it is unclear to what values certain members of struct siginfo_t would need to be set to (cf. [5], [6]). /* compat syscalls */ It became clear that we would like to avoid adding compat syscalls (cf. [7]). The compat syscall handling is now done in kernel/signal.c itself by adding __copy_siginfo_from_user_generic() which lets us avoid compat syscalls (cf. [8]). It should be noted that the addition of __copy_siginfo_from_user_any() is caused by a bug in the original implementation of rt_sigqueueinfo(2) (cf. 12). With upcoming rework for syscall handling things might improve significantly (cf. [11]) and __copy_siginfo_from_user_any() will not gain any additional callers. /* testing */ This patch was tested on x64 and x86. /* userspace usage */ An asciinema recording for the basic functionality can be found under [9]. With this patch a process can be killed via: #define _GNU_SOURCE #include <errno.h> #include <fcntl.h> #include <signal.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/stat.h> #include <sys/syscall.h> #include <sys/types.h> #include <unistd.h> static inline int do_pidfd_send_signal(int pidfd, int sig, siginfo_t *info, unsigned int flags) { #ifdef __NR_pidfd_send_signal return syscall(__NR_pidfd_send_signal, pidfd, sig, info, flags); #else return -ENOSYS; #endif } int main(int argc, char *argv[]) { int fd, ret, saved_errno, sig; if (argc < 3) exit(EXIT_FAILURE); fd = open(argv[1], O_DIRECTORY | O_CLOEXEC); if (fd < 0) { printf("%s - Failed to open \"%s\"\n", strerror(errno), argv[1]); exit(EXIT_FAILURE); } sig = atoi(argv[2]); printf("Sending signal %d to process %s\n", sig, argv[1]); ret = do_pidfd_send_signal(fd, sig, NULL, 0); saved_errno = errno; close(fd); errno = saved_errno; if (ret < 0) { printf("%s - Failed to send signal %d to process %s\n", strerror(errno), sig, argv[1]); exit(EXIT_FAILURE); } exit(EXIT_SUCCESS); } /* Q&A * Given that it seems the same questions get asked again by people who are * late to the party it makes sense to add a Q&A section to the commit * message so it's hopefully easier to avoid duplicate threads. * * For the sake of progress please consider these arguments settled unless * there is a new point that desperately needs to be addressed. Please make * sure to check the links to the threads in this commit message whether * this has not already been covered. */ Q-01: (Florian Weimer [20], Andrew Morton [21]) What happens when the target process has exited? A-01: Sending the signal will fail with ESRCH (cf. [22]). Q-02: (Andrew Morton [21]) Is the task_struct pinned by the fd? A-02: No. A reference to struct pid is kept. struct pid - as far as I understand - was created exactly for the reason to not require to pin struct task_struct (cf. [22]). Q-03: (Andrew Morton [21]) Does the entire procfs directory remain visible? Just one entry within it? A-03: The same thing that happens right now when you hold a file descriptor to /proc/<pid> open (cf. [22]). Q-04: (Andrew Morton [21]) Does the pid remain reserved? A-04: No. This patchset guarantees a stable handle not that pids are not recycled (cf. [22]). Q-05: (Andrew Morton [21]) Do attempts to signal that fd return errors? A-05: See {Q,A}-01. Q-06: (Andrew Morton [22]) Is there a cleaner way of obtaining the fd? Another syscall perhaps. A-06: Userspace can already trivially retrieve file descriptors from procfs so this is something that we will need to support anyway. Hence, there's no immediate need to add another syscalls just to make pidfd_send_signal() not dependent on the presence of procfs. However, adding a syscalls to get such file descriptors is planned for a future patchset (cf. [22]). Q-07: (Andrew Morton [21] and others) This fd-for-a-process sounds like a handy thing and people may well think up other uses for it in the future, probably unrelated to signals. Are the code and the interface designed to permit such future applications? A-07: Yes (cf. [22]). Q-08: (Andrew Morton [21] and others) Now I think about it, why a new syscall? This thing is looking rather like an ioctl? A-08: This has been extensively discussed. It was agreed that a syscall is preferred for a variety or reasons. Here are just a few taken from prior threads. Syscalls are safer than ioctl()s especially when signaling to fds. Processes are a core kernel concept so a syscall seems more appropriate. The layout of the syscall with its four arguments would require the addition of a custom struct for the ioctl() thereby causing at least the same amount or even more complexity for userspace than a simple syscall. The new syscall will replace multiple other pid-based syscalls (see description above). The file-descriptors-for-processes concept introduced with this syscall will be extended with other syscalls in the future. See also [22], [23] and various other threads already linked in here. Q-09: (Florian Weimer [24]) What happens if you use the new interface with an O_PATH descriptor? A-09: pidfds opened as O_PATH fds cannot be used to send signals to a process (cf. [2]). Signaling processes through pidfds is the equivalent of writing to a file. Thus, this is not an operation that operates "purely at the file descriptor level" as required by the open(2) manpage. See also [4]. /* References */ [1]: https://lore.kernel.org/lkml/20181029221037.87724-1-dancol@google.com/ [2]: https://lore.kernel.org/lkml/874lbtjvtd.fsf@oldenburg2.str.redhat.com/ [3]: https://lore.kernel.org/lkml/20181204132604.aspfupwjgjx6fhva@brauner.io/ [4]: https://lore.kernel.org/lkml/20181203180224.fkvw4kajtbvru2ku@brauner.io/ [5]: https://lore.kernel.org/lkml/20181121213946.GA10795@mail.hallyn.com/ [6]: https://lore.kernel.org/lkml/20181120103111.etlqp7zop34v6nv4@brauner.io/ [7]: https://lore.kernel.org/lkml/36323361-90BD-41AF-AB5B-EE0D7BA02C21@amacapital.net/ [8]: https://lore.kernel.org/lkml/87tvjxp8pc.fsf@xmission.com/ [9]: https://asciinema.org/a/IQjuCHew6bnq1cr78yuMv16cy [11]: https://lore.kernel.org/lkml/F53D6D38-3521-4C20-9034-5AF447DF62FF@amacapital.net/ [12]: https://lore.kernel.org/lkml/87zhtjn8ck.fsf@xmission.com/ [13]: https://lore.kernel.org/lkml/871s6u9z6u.fsf@xmission.com/ [14]: https://lore.kernel.org/lkml/20181206231742.xxi4ghn24z4h2qki@brauner.io/ [15]: https://lore.kernel.org/lkml/20181207003124.GA11160@mail.hallyn.com/ [16]: https://lore.kernel.org/lkml/20181207015423.4miorx43l3qhppfz@brauner.io/ [17]: https://lore.kernel.org/lkml/CAGXu5jL8PciZAXvOvCeCU3wKUEB_dU-O3q0tDw4uB_ojMvDEew@mail.gmail.com/ [18]: https://lore.kernel.org/lkml/20181206222746.GB9224@mail.hallyn.com/ [19]: https://lore.kernel.org/lkml/20181208054059.19813-1-christian@brauner.io/ [20]: https://lore.kernel.org/lkml/8736rebl9s.fsf@oldenburg.str.redhat.com/ [21]: https://lore.kernel.org/lkml/20181228152012.dbf0508c2508138efc5f2bbe@linux-foundation.org/ [22]: https://lore.kernel.org/lkml/20181228233725.722tdfgijxcssg76@brauner.io/ [23]: https://lwn.net/Articles/773459/ [24]: https://lore.kernel.org/lkml/8736rebl9s.fsf@oldenburg.str.redhat.com/ [25]: https://lore.kernel.org/lkml/CAK8P3a0ej9NcJM8wXNPbcGUyOUZYX+VLoDFdbenW3s3114oQZw@mail.gmail.com/ Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Jann Horn <jannh@google.com> Cc: Andy Lutomirsky <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Florian Weimer <fweimer@redhat.com> Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Tycho Andersen <tycho@tycho.ws> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Serge Hallyn <serge@hallyn.com> Acked-by: Aleksa Sarai <cyphar@cyphar.com>
2018-11-18 23:51:56 +00:00
static inline void prepare_kill_siginfo(int sig, struct kernel_siginfo *info)
{
clear_siginfo(info);
info->si_signo = sig;
info->si_errno = 0;
info->si_code = SI_USER;
info->si_pid = task_tgid_vnr(current);
info->si_uid = from_kuid_munged(current_user_ns(), current_uid());
}
kernel/signal.c: add kernel-doc notation to syscalls Add kernel-doc to syscalls in signal.c. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-04 22:00:26 +00:00
/**
* sys_kill - send a signal to a process
* @pid: the PID of the process
* @sig: signal to be sent
*/
[CVE-2009-0029] System call wrappers part 08 Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 13:14:10 +00:00
SYSCALL_DEFINE2(kill, pid_t, pid, int, sig)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
struct kernel_siginfo info;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
signal: add pidfd_send_signal() syscall The kill() syscall operates on process identifiers (pid). After a process has exited its pid can be reused by another process. If a caller sends a signal to a reused pid it will end up signaling the wrong process. This issue has often surfaced and there has been a push to address this problem [1]. This patch uses file descriptors (fd) from proc/<pid> as stable handles on struct pid. Even if a pid is recycled the handle will not change. The fd can be used to send signals to the process it refers to. Thus, the new syscall pidfd_send_signal() is introduced to solve this problem. Instead of pids it operates on process fds (pidfd). /* prototype and argument /* long pidfd_send_signal(int pidfd, int sig, siginfo_t *info, unsigned int flags); /* syscall number 424 */ The syscall number was chosen to be 424 to align with Arnd's rework in his y2038 to minimize merge conflicts (cf. [25]). In addition to the pidfd and signal argument it takes an additional siginfo_t and flags argument. If the siginfo_t argument is NULL then pidfd_send_signal() is equivalent to kill(<positive-pid>, <signal>). If it is not NULL pidfd_send_signal() is equivalent to rt_sigqueueinfo(). The flags argument is added to allow for future extensions of this syscall. It currently needs to be passed as 0. Failing to do so will cause EINVAL. /* pidfd_send_signal() replaces multiple pid-based syscalls */ The pidfd_send_signal() syscall currently takes on the job of rt_sigqueueinfo(2) and parts of the functionality of kill(2), Namely, when a positive pid is passed to kill(2). It will however be possible to also replace tgkill(2) and rt_tgsigqueueinfo(2) if this syscall is extended. /* sending signals to threads (tid) and process groups (pgid) */ Specifically, the pidfd_send_signal() syscall does currently not operate on process groups or threads. This is left for future extensions. In order to extend the syscall to allow sending signal to threads and process groups appropriately named flags (e.g. PIDFD_TYPE_PGID, and PIDFD_TYPE_TID) should be added. This implies that the flags argument will determine what is signaled and not the file descriptor itself. Put in other words, grouping in this api is a property of the flags argument not a property of the file descriptor (cf. [13]). Clarification for this has been requested by Eric (cf. [19]). When appropriate extensions through the flags argument are added then pidfd_send_signal() can additionally replace the part of kill(2) which operates on process groups as well as the tgkill(2) and rt_tgsigqueueinfo(2) syscalls. How such an extension could be implemented has been very roughly sketched in [14], [15], and [16]. However, this should not be taken as a commitment to a particular implementation. There might be better ways to do it. Right now this is intentionally left out to keep this patchset as simple as possible (cf. [4]). /* naming */ The syscall had various names throughout iterations of this patchset: - procfd_signal() - procfd_send_signal() - taskfd_send_signal() In the last round of reviews it was pointed out that given that if the flags argument decides the scope of the signal instead of different types of fds it might make sense to either settle for "procfd_" or "pidfd_" as prefix. The community was willing to accept either (cf. [17] and [18]). Given that one developer expressed strong preference for the "pidfd_" prefix (cf. [13]) and with other developers less opinionated about the name we should settle for "pidfd_" to avoid further bikeshedding. The "_send_signal" suffix was chosen to reflect the fact that the syscall takes on the job of multiple syscalls. It is therefore intentional that the name is not reminiscent of neither kill(2) nor rt_sigqueueinfo(2). Not the fomer because it might imply that pidfd_send_signal() is a replacement for kill(2), and not the latter because it is a hassle to remember the correct spelling - especially for non-native speakers - and because it is not descriptive enough of what the syscall actually does. The name "pidfd_send_signal" makes it very clear that its job is to send signals. /* zombies */ Zombies can be signaled just as any other process. No special error will be reported since a zombie state is an unreliable state (cf. [3]). However, this can be added as an extension through the @flags argument if the need ever arises. /* cross-namespace signals */ The patch currently enforces that the signaler and signalee either are in the same pid namespace or that the signaler's pid namespace is an ancestor of the signalee's pid namespace. This is done for the sake of simplicity and because it is unclear to what values certain members of struct siginfo_t would need to be set to (cf. [5], [6]). /* compat syscalls */ It became clear that we would like to avoid adding compat syscalls (cf. [7]). The compat syscall handling is now done in kernel/signal.c itself by adding __copy_siginfo_from_user_generic() which lets us avoid compat syscalls (cf. [8]). It should be noted that the addition of __copy_siginfo_from_user_any() is caused by a bug in the original implementation of rt_sigqueueinfo(2) (cf. 12). With upcoming rework for syscall handling things might improve significantly (cf. [11]) and __copy_siginfo_from_user_any() will not gain any additional callers. /* testing */ This patch was tested on x64 and x86. /* userspace usage */ An asciinema recording for the basic functionality can be found under [9]. With this patch a process can be killed via: #define _GNU_SOURCE #include <errno.h> #include <fcntl.h> #include <signal.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/stat.h> #include <sys/syscall.h> #include <sys/types.h> #include <unistd.h> static inline int do_pidfd_send_signal(int pidfd, int sig, siginfo_t *info, unsigned int flags) { #ifdef __NR_pidfd_send_signal return syscall(__NR_pidfd_send_signal, pidfd, sig, info, flags); #else return -ENOSYS; #endif } int main(int argc, char *argv[]) { int fd, ret, saved_errno, sig; if (argc < 3) exit(EXIT_FAILURE); fd = open(argv[1], O_DIRECTORY | O_CLOEXEC); if (fd < 0) { printf("%s - Failed to open \"%s\"\n", strerror(errno), argv[1]); exit(EXIT_FAILURE); } sig = atoi(argv[2]); printf("Sending signal %d to process %s\n", sig, argv[1]); ret = do_pidfd_send_signal(fd, sig, NULL, 0); saved_errno = errno; close(fd); errno = saved_errno; if (ret < 0) { printf("%s - Failed to send signal %d to process %s\n", strerror(errno), sig, argv[1]); exit(EXIT_FAILURE); } exit(EXIT_SUCCESS); } /* Q&A * Given that it seems the same questions get asked again by people who are * late to the party it makes sense to add a Q&A section to the commit * message so it's hopefully easier to avoid duplicate threads. * * For the sake of progress please consider these arguments settled unless * there is a new point that desperately needs to be addressed. Please make * sure to check the links to the threads in this commit message whether * this has not already been covered. */ Q-01: (Florian Weimer [20], Andrew Morton [21]) What happens when the target process has exited? A-01: Sending the signal will fail with ESRCH (cf. [22]). Q-02: (Andrew Morton [21]) Is the task_struct pinned by the fd? A-02: No. A reference to struct pid is kept. struct pid - as far as I understand - was created exactly for the reason to not require to pin struct task_struct (cf. [22]). Q-03: (Andrew Morton [21]) Does the entire procfs directory remain visible? Just one entry within it? A-03: The same thing that happens right now when you hold a file descriptor to /proc/<pid> open (cf. [22]). Q-04: (Andrew Morton [21]) Does the pid remain reserved? A-04: No. This patchset guarantees a stable handle not that pids are not recycled (cf. [22]). Q-05: (Andrew Morton [21]) Do attempts to signal that fd return errors? A-05: See {Q,A}-01. Q-06: (Andrew Morton [22]) Is there a cleaner way of obtaining the fd? Another syscall perhaps. A-06: Userspace can already trivially retrieve file descriptors from procfs so this is something that we will need to support anyway. Hence, there's no immediate need to add another syscalls just to make pidfd_send_signal() not dependent on the presence of procfs. However, adding a syscalls to get such file descriptors is planned for a future patchset (cf. [22]). Q-07: (Andrew Morton [21] and others) This fd-for-a-process sounds like a handy thing and people may well think up other uses for it in the future, probably unrelated to signals. Are the code and the interface designed to permit such future applications? A-07: Yes (cf. [22]). Q-08: (Andrew Morton [21] and others) Now I think about it, why a new syscall? This thing is looking rather like an ioctl? A-08: This has been extensively discussed. It was agreed that a syscall is preferred for a variety or reasons. Here are just a few taken from prior threads. Syscalls are safer than ioctl()s especially when signaling to fds. Processes are a core kernel concept so a syscall seems more appropriate. The layout of the syscall with its four arguments would require the addition of a custom struct for the ioctl() thereby causing at least the same amount or even more complexity for userspace than a simple syscall. The new syscall will replace multiple other pid-based syscalls (see description above). The file-descriptors-for-processes concept introduced with this syscall will be extended with other syscalls in the future. See also [22], [23] and various other threads already linked in here. Q-09: (Florian Weimer [24]) What happens if you use the new interface with an O_PATH descriptor? A-09: pidfds opened as O_PATH fds cannot be used to send signals to a process (cf. [2]). Signaling processes through pidfds is the equivalent of writing to a file. Thus, this is not an operation that operates "purely at the file descriptor level" as required by the open(2) manpage. See also [4]. /* References */ [1]: https://lore.kernel.org/lkml/20181029221037.87724-1-dancol@google.com/ [2]: https://lore.kernel.org/lkml/874lbtjvtd.fsf@oldenburg2.str.redhat.com/ [3]: https://lore.kernel.org/lkml/20181204132604.aspfupwjgjx6fhva@brauner.io/ [4]: https://lore.kernel.org/lkml/20181203180224.fkvw4kajtbvru2ku@brauner.io/ [5]: https://lore.kernel.org/lkml/20181121213946.GA10795@mail.hallyn.com/ [6]: https://lore.kernel.org/lkml/20181120103111.etlqp7zop34v6nv4@brauner.io/ [7]: https://lore.kernel.org/lkml/36323361-90BD-41AF-AB5B-EE0D7BA02C21@amacapital.net/ [8]: https://lore.kernel.org/lkml/87tvjxp8pc.fsf@xmission.com/ [9]: https://asciinema.org/a/IQjuCHew6bnq1cr78yuMv16cy [11]: https://lore.kernel.org/lkml/F53D6D38-3521-4C20-9034-5AF447DF62FF@amacapital.net/ [12]: https://lore.kernel.org/lkml/87zhtjn8ck.fsf@xmission.com/ [13]: https://lore.kernel.org/lkml/871s6u9z6u.fsf@xmission.com/ [14]: https://lore.kernel.org/lkml/20181206231742.xxi4ghn24z4h2qki@brauner.io/ [15]: https://lore.kernel.org/lkml/20181207003124.GA11160@mail.hallyn.com/ [16]: https://lore.kernel.org/lkml/20181207015423.4miorx43l3qhppfz@brauner.io/ [17]: https://lore.kernel.org/lkml/CAGXu5jL8PciZAXvOvCeCU3wKUEB_dU-O3q0tDw4uB_ojMvDEew@mail.gmail.com/ [18]: https://lore.kernel.org/lkml/20181206222746.GB9224@mail.hallyn.com/ [19]: https://lore.kernel.org/lkml/20181208054059.19813-1-christian@brauner.io/ [20]: https://lore.kernel.org/lkml/8736rebl9s.fsf@oldenburg.str.redhat.com/ [21]: https://lore.kernel.org/lkml/20181228152012.dbf0508c2508138efc5f2bbe@linux-foundation.org/ [22]: https://lore.kernel.org/lkml/20181228233725.722tdfgijxcssg76@brauner.io/ [23]: https://lwn.net/Articles/773459/ [24]: https://lore.kernel.org/lkml/8736rebl9s.fsf@oldenburg.str.redhat.com/ [25]: https://lore.kernel.org/lkml/CAK8P3a0ej9NcJM8wXNPbcGUyOUZYX+VLoDFdbenW3s3114oQZw@mail.gmail.com/ Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Jann Horn <jannh@google.com> Cc: Andy Lutomirsky <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Florian Weimer <fweimer@redhat.com> Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Tycho Andersen <tycho@tycho.ws> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Serge Hallyn <serge@hallyn.com> Acked-by: Aleksa Sarai <cyphar@cyphar.com>
2018-11-18 23:51:56 +00:00
prepare_kill_siginfo(sig, &info);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return kill_something_info(sig, &info, pid);
}
signal: add pidfd_send_signal() syscall The kill() syscall operates on process identifiers (pid). After a process has exited its pid can be reused by another process. If a caller sends a signal to a reused pid it will end up signaling the wrong process. This issue has often surfaced and there has been a push to address this problem [1]. This patch uses file descriptors (fd) from proc/<pid> as stable handles on struct pid. Even if a pid is recycled the handle will not change. The fd can be used to send signals to the process it refers to. Thus, the new syscall pidfd_send_signal() is introduced to solve this problem. Instead of pids it operates on process fds (pidfd). /* prototype and argument /* long pidfd_send_signal(int pidfd, int sig, siginfo_t *info, unsigned int flags); /* syscall number 424 */ The syscall number was chosen to be 424 to align with Arnd's rework in his y2038 to minimize merge conflicts (cf. [25]). In addition to the pidfd and signal argument it takes an additional siginfo_t and flags argument. If the siginfo_t argument is NULL then pidfd_send_signal() is equivalent to kill(<positive-pid>, <signal>). If it is not NULL pidfd_send_signal() is equivalent to rt_sigqueueinfo(). The flags argument is added to allow for future extensions of this syscall. It currently needs to be passed as 0. Failing to do so will cause EINVAL. /* pidfd_send_signal() replaces multiple pid-based syscalls */ The pidfd_send_signal() syscall currently takes on the job of rt_sigqueueinfo(2) and parts of the functionality of kill(2), Namely, when a positive pid is passed to kill(2). It will however be possible to also replace tgkill(2) and rt_tgsigqueueinfo(2) if this syscall is extended. /* sending signals to threads (tid) and process groups (pgid) */ Specifically, the pidfd_send_signal() syscall does currently not operate on process groups or threads. This is left for future extensions. In order to extend the syscall to allow sending signal to threads and process groups appropriately named flags (e.g. PIDFD_TYPE_PGID, and PIDFD_TYPE_TID) should be added. This implies that the flags argument will determine what is signaled and not the file descriptor itself. Put in other words, grouping in this api is a property of the flags argument not a property of the file descriptor (cf. [13]). Clarification for this has been requested by Eric (cf. [19]). When appropriate extensions through the flags argument are added then pidfd_send_signal() can additionally replace the part of kill(2) which operates on process groups as well as the tgkill(2) and rt_tgsigqueueinfo(2) syscalls. How such an extension could be implemented has been very roughly sketched in [14], [15], and [16]. However, this should not be taken as a commitment to a particular implementation. There might be better ways to do it. Right now this is intentionally left out to keep this patchset as simple as possible (cf. [4]). /* naming */ The syscall had various names throughout iterations of this patchset: - procfd_signal() - procfd_send_signal() - taskfd_send_signal() In the last round of reviews it was pointed out that given that if the flags argument decides the scope of the signal instead of different types of fds it might make sense to either settle for "procfd_" or "pidfd_" as prefix. The community was willing to accept either (cf. [17] and [18]). Given that one developer expressed strong preference for the "pidfd_" prefix (cf. [13]) and with other developers less opinionated about the name we should settle for "pidfd_" to avoid further bikeshedding. The "_send_signal" suffix was chosen to reflect the fact that the syscall takes on the job of multiple syscalls. It is therefore intentional that the name is not reminiscent of neither kill(2) nor rt_sigqueueinfo(2). Not the fomer because it might imply that pidfd_send_signal() is a replacement for kill(2), and not the latter because it is a hassle to remember the correct spelling - especially for non-native speakers - and because it is not descriptive enough of what the syscall actually does. The name "pidfd_send_signal" makes it very clear that its job is to send signals. /* zombies */ Zombies can be signaled just as any other process. No special error will be reported since a zombie state is an unreliable state (cf. [3]). However, this can be added as an extension through the @flags argument if the need ever arises. /* cross-namespace signals */ The patch currently enforces that the signaler and signalee either are in the same pid namespace or that the signaler's pid namespace is an ancestor of the signalee's pid namespace. This is done for the sake of simplicity and because it is unclear to what values certain members of struct siginfo_t would need to be set to (cf. [5], [6]). /* compat syscalls */ It became clear that we would like to avoid adding compat syscalls (cf. [7]). The compat syscall handling is now done in kernel/signal.c itself by adding __copy_siginfo_from_user_generic() which lets us avoid compat syscalls (cf. [8]). It should be noted that the addition of __copy_siginfo_from_user_any() is caused by a bug in the original implementation of rt_sigqueueinfo(2) (cf. 12). With upcoming rework for syscall handling things might improve significantly (cf. [11]) and __copy_siginfo_from_user_any() will not gain any additional callers. /* testing */ This patch was tested on x64 and x86. /* userspace usage */ An asciinema recording for the basic functionality can be found under [9]. With this patch a process can be killed via: #define _GNU_SOURCE #include <errno.h> #include <fcntl.h> #include <signal.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/stat.h> #include <sys/syscall.h> #include <sys/types.h> #include <unistd.h> static inline int do_pidfd_send_signal(int pidfd, int sig, siginfo_t *info, unsigned int flags) { #ifdef __NR_pidfd_send_signal return syscall(__NR_pidfd_send_signal, pidfd, sig, info, flags); #else return -ENOSYS; #endif } int main(int argc, char *argv[]) { int fd, ret, saved_errno, sig; if (argc < 3) exit(EXIT_FAILURE); fd = open(argv[1], O_DIRECTORY | O_CLOEXEC); if (fd < 0) { printf("%s - Failed to open \"%s\"\n", strerror(errno), argv[1]); exit(EXIT_FAILURE); } sig = atoi(argv[2]); printf("Sending signal %d to process %s\n", sig, argv[1]); ret = do_pidfd_send_signal(fd, sig, NULL, 0); saved_errno = errno; close(fd); errno = saved_errno; if (ret < 0) { printf("%s - Failed to send signal %d to process %s\n", strerror(errno), sig, argv[1]); exit(EXIT_FAILURE); } exit(EXIT_SUCCESS); } /* Q&A * Given that it seems the same questions get asked again by people who are * late to the party it makes sense to add a Q&A section to the commit * message so it's hopefully easier to avoid duplicate threads. * * For the sake of progress please consider these arguments settled unless * there is a new point that desperately needs to be addressed. Please make * sure to check the links to the threads in this commit message whether * this has not already been covered. */ Q-01: (Florian Weimer [20], Andrew Morton [21]) What happens when the target process has exited? A-01: Sending the signal will fail with ESRCH (cf. [22]). Q-02: (Andrew Morton [21]) Is the task_struct pinned by the fd? A-02: No. A reference to struct pid is kept. struct pid - as far as I understand - was created exactly for the reason to not require to pin struct task_struct (cf. [22]). Q-03: (Andrew Morton [21]) Does the entire procfs directory remain visible? Just one entry within it? A-03: The same thing that happens right now when you hold a file descriptor to /proc/<pid> open (cf. [22]). Q-04: (Andrew Morton [21]) Does the pid remain reserved? A-04: No. This patchset guarantees a stable handle not that pids are not recycled (cf. [22]). Q-05: (Andrew Morton [21]) Do attempts to signal that fd return errors? A-05: See {Q,A}-01. Q-06: (Andrew Morton [22]) Is there a cleaner way of obtaining the fd? Another syscall perhaps. A-06: Userspace can already trivially retrieve file descriptors from procfs so this is something that we will need to support anyway. Hence, there's no immediate need to add another syscalls just to make pidfd_send_signal() not dependent on the presence of procfs. However, adding a syscalls to get such file descriptors is planned for a future patchset (cf. [22]). Q-07: (Andrew Morton [21] and others) This fd-for-a-process sounds like a handy thing and people may well think up other uses for it in the future, probably unrelated to signals. Are the code and the interface designed to permit such future applications? A-07: Yes (cf. [22]). Q-08: (Andrew Morton [21] and others) Now I think about it, why a new syscall? This thing is looking rather like an ioctl? A-08: This has been extensively discussed. It was agreed that a syscall is preferred for a variety or reasons. Here are just a few taken from prior threads. Syscalls are safer than ioctl()s especially when signaling to fds. Processes are a core kernel concept so a syscall seems more appropriate. The layout of the syscall with its four arguments would require the addition of a custom struct for the ioctl() thereby causing at least the same amount or even more complexity for userspace than a simple syscall. The new syscall will replace multiple other pid-based syscalls (see description above). The file-descriptors-for-processes concept introduced with this syscall will be extended with other syscalls in the future. See also [22], [23] and various other threads already linked in here. Q-09: (Florian Weimer [24]) What happens if you use the new interface with an O_PATH descriptor? A-09: pidfds opened as O_PATH fds cannot be used to send signals to a process (cf. [2]). Signaling processes through pidfds is the equivalent of writing to a file. Thus, this is not an operation that operates "purely at the file descriptor level" as required by the open(2) manpage. See also [4]. /* References */ [1]: https://lore.kernel.org/lkml/20181029221037.87724-1-dancol@google.com/ [2]: https://lore.kernel.org/lkml/874lbtjvtd.fsf@oldenburg2.str.redhat.com/ [3]: https://lore.kernel.org/lkml/20181204132604.aspfupwjgjx6fhva@brauner.io/ [4]: https://lore.kernel.org/lkml/20181203180224.fkvw4kajtbvru2ku@brauner.io/ [5]: https://lore.kernel.org/lkml/20181121213946.GA10795@mail.hallyn.com/ [6]: https://lore.kernel.org/lkml/20181120103111.etlqp7zop34v6nv4@brauner.io/ [7]: https://lore.kernel.org/lkml/36323361-90BD-41AF-AB5B-EE0D7BA02C21@amacapital.net/ [8]: https://lore.kernel.org/lkml/87tvjxp8pc.fsf@xmission.com/ [9]: https://asciinema.org/a/IQjuCHew6bnq1cr78yuMv16cy [11]: https://lore.kernel.org/lkml/F53D6D38-3521-4C20-9034-5AF447DF62FF@amacapital.net/ [12]: https://lore.kernel.org/lkml/87zhtjn8ck.fsf@xmission.com/ [13]: https://lore.kernel.org/lkml/871s6u9z6u.fsf@xmission.com/ [14]: https://lore.kernel.org/lkml/20181206231742.xxi4ghn24z4h2qki@brauner.io/ [15]: https://lore.kernel.org/lkml/20181207003124.GA11160@mail.hallyn.com/ [16]: https://lore.kernel.org/lkml/20181207015423.4miorx43l3qhppfz@brauner.io/ [17]: https://lore.kernel.org/lkml/CAGXu5jL8PciZAXvOvCeCU3wKUEB_dU-O3q0tDw4uB_ojMvDEew@mail.gmail.com/ [18]: https://lore.kernel.org/lkml/20181206222746.GB9224@mail.hallyn.com/ [19]: https://lore.kernel.org/lkml/20181208054059.19813-1-christian@brauner.io/ [20]: https://lore.kernel.org/lkml/8736rebl9s.fsf@oldenburg.str.redhat.com/ [21]: https://lore.kernel.org/lkml/20181228152012.dbf0508c2508138efc5f2bbe@linux-foundation.org/ [22]: https://lore.kernel.org/lkml/20181228233725.722tdfgijxcssg76@brauner.io/ [23]: https://lwn.net/Articles/773459/ [24]: https://lore.kernel.org/lkml/8736rebl9s.fsf@oldenburg.str.redhat.com/ [25]: https://lore.kernel.org/lkml/CAK8P3a0ej9NcJM8wXNPbcGUyOUZYX+VLoDFdbenW3s3114oQZw@mail.gmail.com/ Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Jann Horn <jannh@google.com> Cc: Andy Lutomirsky <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Florian Weimer <fweimer@redhat.com> Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Tycho Andersen <tycho@tycho.ws> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Serge Hallyn <serge@hallyn.com> Acked-by: Aleksa Sarai <cyphar@cyphar.com>
2018-11-18 23:51:56 +00:00
/*
* Verify that the signaler and signalee either are in the same pid namespace
* or that the signaler's pid namespace is an ancestor of the signalee's pid
* namespace.
*/
static bool access_pidfd_pidns(struct pid *pid)
{
struct pid_namespace *active = task_active_pid_ns(current);
struct pid_namespace *p = ns_of_pid(pid);
for (;;) {
if (!p)
return false;
if (p == active)
break;
p = p->parent;
}
return true;
}
static int copy_siginfo_from_user_any(kernel_siginfo_t *kinfo, siginfo_t *info)
{
#ifdef CONFIG_COMPAT
/*
* Avoid hooking up compat syscalls and instead handle necessary
* conversions here. Note, this is a stop-gap measure and should not be
* considered a generic solution.
*/
if (in_compat_syscall())
return copy_siginfo_from_user32(
kinfo, (struct compat_siginfo __user *)info);
#endif
return copy_siginfo_from_user(kinfo, info);
}
signal: support CLONE_PIDFD with pidfd_send_signal Let pidfd_send_signal() use pidfds retrieved via CLONE_PIDFD. With this patch pidfd_send_signal() becomes independent of procfs. This fullfils the request made when we merged the pidfd_send_signal() patchset. The pidfd_send_signal() syscall is now always available allowing for it to be used by users without procfs mounted or even users without procfs support compiled into the kernel. Signed-off-by: Christian Brauner <christian@brauner.io> Co-developed-by: Jann Horn <jannh@google.com> Signed-off-by: Jann Horn <jannh@google.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Kees Cook <keescook@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: David Howells <dhowells@redhat.com> Cc: "Michael Kerrisk (man-pages)" <mtk.manpages@gmail.com> Cc: Andy Lutomirsky <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk>
2019-04-17 20:50:25 +00:00
static struct pid *pidfd_to_pid(const struct file *file)
{
pidfd: add P_PIDFD to waitid() This adds the P_PIDFD type to waitid(). One of the last remaining bits for the pidfd api is to make it possible to wait on pidfds. With P_PIDFD added to waitid() the parts of userspace that want to use the pidfd api to exclusively manage processes can do so now. One of the things this will unblock in the future is the ability to make it possible to retrieve the exit status via waitid(P_PIDFD) for non-parent processes if handed a _suitable_ pidfd that has this feature set. This is similar to what you can do on FreeBSD with kqueue(). It might even end up being possible to wait on a process as a non-parent if an appropriate property is enabled on the pidfd. With P_PIDFD no scoping of the process identified by the pidfd is possible, i.e. it explicitly blocks things such as wait4(-1), wait4(0), waitid(P_ALL), waitid(P_PGID) etc. It only allows for semantics equivalent to wait4(pid), waitid(P_PID). Users that need scoping should rely on pid-based wait*() syscalls for now. Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: David Howells <dhowells@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Andy Lutomirsky <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Link: https://lore.kernel.org/r/20190727222229.6516-2-christian@brauner.io
2019-07-27 22:22:29 +00:00
struct pid *pid;
pid = pidfd_pid(file);
if (!IS_ERR(pid))
return pid;
signal: support CLONE_PIDFD with pidfd_send_signal Let pidfd_send_signal() use pidfds retrieved via CLONE_PIDFD. With this patch pidfd_send_signal() becomes independent of procfs. This fullfils the request made when we merged the pidfd_send_signal() patchset. The pidfd_send_signal() syscall is now always available allowing for it to be used by users without procfs mounted or even users without procfs support compiled into the kernel. Signed-off-by: Christian Brauner <christian@brauner.io> Co-developed-by: Jann Horn <jannh@google.com> Signed-off-by: Jann Horn <jannh@google.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Kees Cook <keescook@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: David Howells <dhowells@redhat.com> Cc: "Michael Kerrisk (man-pages)" <mtk.manpages@gmail.com> Cc: Andy Lutomirsky <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk>
2019-04-17 20:50:25 +00:00
return tgid_pidfd_to_pid(file);
}
signal: add pidfd_send_signal() syscall The kill() syscall operates on process identifiers (pid). After a process has exited its pid can be reused by another process. If a caller sends a signal to a reused pid it will end up signaling the wrong process. This issue has often surfaced and there has been a push to address this problem [1]. This patch uses file descriptors (fd) from proc/<pid> as stable handles on struct pid. Even if a pid is recycled the handle will not change. The fd can be used to send signals to the process it refers to. Thus, the new syscall pidfd_send_signal() is introduced to solve this problem. Instead of pids it operates on process fds (pidfd). /* prototype and argument /* long pidfd_send_signal(int pidfd, int sig, siginfo_t *info, unsigned int flags); /* syscall number 424 */ The syscall number was chosen to be 424 to align with Arnd's rework in his y2038 to minimize merge conflicts (cf. [25]). In addition to the pidfd and signal argument it takes an additional siginfo_t and flags argument. If the siginfo_t argument is NULL then pidfd_send_signal() is equivalent to kill(<positive-pid>, <signal>). If it is not NULL pidfd_send_signal() is equivalent to rt_sigqueueinfo(). The flags argument is added to allow for future extensions of this syscall. It currently needs to be passed as 0. Failing to do so will cause EINVAL. /* pidfd_send_signal() replaces multiple pid-based syscalls */ The pidfd_send_signal() syscall currently takes on the job of rt_sigqueueinfo(2) and parts of the functionality of kill(2), Namely, when a positive pid is passed to kill(2). It will however be possible to also replace tgkill(2) and rt_tgsigqueueinfo(2) if this syscall is extended. /* sending signals to threads (tid) and process groups (pgid) */ Specifically, the pidfd_send_signal() syscall does currently not operate on process groups or threads. This is left for future extensions. In order to extend the syscall to allow sending signal to threads and process groups appropriately named flags (e.g. PIDFD_TYPE_PGID, and PIDFD_TYPE_TID) should be added. This implies that the flags argument will determine what is signaled and not the file descriptor itself. Put in other words, grouping in this api is a property of the flags argument not a property of the file descriptor (cf. [13]). Clarification for this has been requested by Eric (cf. [19]). When appropriate extensions through the flags argument are added then pidfd_send_signal() can additionally replace the part of kill(2) which operates on process groups as well as the tgkill(2) and rt_tgsigqueueinfo(2) syscalls. How such an extension could be implemented has been very roughly sketched in [14], [15], and [16]. However, this should not be taken as a commitment to a particular implementation. There might be better ways to do it. Right now this is intentionally left out to keep this patchset as simple as possible (cf. [4]). /* naming */ The syscall had various names throughout iterations of this patchset: - procfd_signal() - procfd_send_signal() - taskfd_send_signal() In the last round of reviews it was pointed out that given that if the flags argument decides the scope of the signal instead of different types of fds it might make sense to either settle for "procfd_" or "pidfd_" as prefix. The community was willing to accept either (cf. [17] and [18]). Given that one developer expressed strong preference for the "pidfd_" prefix (cf. [13]) and with other developers less opinionated about the name we should settle for "pidfd_" to avoid further bikeshedding. The "_send_signal" suffix was chosen to reflect the fact that the syscall takes on the job of multiple syscalls. It is therefore intentional that the name is not reminiscent of neither kill(2) nor rt_sigqueueinfo(2). Not the fomer because it might imply that pidfd_send_signal() is a replacement for kill(2), and not the latter because it is a hassle to remember the correct spelling - especially for non-native speakers - and because it is not descriptive enough of what the syscall actually does. The name "pidfd_send_signal" makes it very clear that its job is to send signals. /* zombies */ Zombies can be signaled just as any other process. No special error will be reported since a zombie state is an unreliable state (cf. [3]). However, this can be added as an extension through the @flags argument if the need ever arises. /* cross-namespace signals */ The patch currently enforces that the signaler and signalee either are in the same pid namespace or that the signaler's pid namespace is an ancestor of the signalee's pid namespace. This is done for the sake of simplicity and because it is unclear to what values certain members of struct siginfo_t would need to be set to (cf. [5], [6]). /* compat syscalls */ It became clear that we would like to avoid adding compat syscalls (cf. [7]). The compat syscall handling is now done in kernel/signal.c itself by adding __copy_siginfo_from_user_generic() which lets us avoid compat syscalls (cf. [8]). It should be noted that the addition of __copy_siginfo_from_user_any() is caused by a bug in the original implementation of rt_sigqueueinfo(2) (cf. 12). With upcoming rework for syscall handling things might improve significantly (cf. [11]) and __copy_siginfo_from_user_any() will not gain any additional callers. /* testing */ This patch was tested on x64 and x86. /* userspace usage */ An asciinema recording for the basic functionality can be found under [9]. With this patch a process can be killed via: #define _GNU_SOURCE #include <errno.h> #include <fcntl.h> #include <signal.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/stat.h> #include <sys/syscall.h> #include <sys/types.h> #include <unistd.h> static inline int do_pidfd_send_signal(int pidfd, int sig, siginfo_t *info, unsigned int flags) { #ifdef __NR_pidfd_send_signal return syscall(__NR_pidfd_send_signal, pidfd, sig, info, flags); #else return -ENOSYS; #endif } int main(int argc, char *argv[]) { int fd, ret, saved_errno, sig; if (argc < 3) exit(EXIT_FAILURE); fd = open(argv[1], O_DIRECTORY | O_CLOEXEC); if (fd < 0) { printf("%s - Failed to open \"%s\"\n", strerror(errno), argv[1]); exit(EXIT_FAILURE); } sig = atoi(argv[2]); printf("Sending signal %d to process %s\n", sig, argv[1]); ret = do_pidfd_send_signal(fd, sig, NULL, 0); saved_errno = errno; close(fd); errno = saved_errno; if (ret < 0) { printf("%s - Failed to send signal %d to process %s\n", strerror(errno), sig, argv[1]); exit(EXIT_FAILURE); } exit(EXIT_SUCCESS); } /* Q&A * Given that it seems the same questions get asked again by people who are * late to the party it makes sense to add a Q&A section to the commit * message so it's hopefully easier to avoid duplicate threads. * * For the sake of progress please consider these arguments settled unless * there is a new point that desperately needs to be addressed. Please make * sure to check the links to the threads in this commit message whether * this has not already been covered. */ Q-01: (Florian Weimer [20], Andrew Morton [21]) What happens when the target process has exited? A-01: Sending the signal will fail with ESRCH (cf. [22]). Q-02: (Andrew Morton [21]) Is the task_struct pinned by the fd? A-02: No. A reference to struct pid is kept. struct pid - as far as I understand - was created exactly for the reason to not require to pin struct task_struct (cf. [22]). Q-03: (Andrew Morton [21]) Does the entire procfs directory remain visible? Just one entry within it? A-03: The same thing that happens right now when you hold a file descriptor to /proc/<pid> open (cf. [22]). Q-04: (Andrew Morton [21]) Does the pid remain reserved? A-04: No. This patchset guarantees a stable handle not that pids are not recycled (cf. [22]). Q-05: (Andrew Morton [21]) Do attempts to signal that fd return errors? A-05: See {Q,A}-01. Q-06: (Andrew Morton [22]) Is there a cleaner way of obtaining the fd? Another syscall perhaps. A-06: Userspace can already trivially retrieve file descriptors from procfs so this is something that we will need to support anyway. Hence, there's no immediate need to add another syscalls just to make pidfd_send_signal() not dependent on the presence of procfs. However, adding a syscalls to get such file descriptors is planned for a future patchset (cf. [22]). Q-07: (Andrew Morton [21] and others) This fd-for-a-process sounds like a handy thing and people may well think up other uses for it in the future, probably unrelated to signals. Are the code and the interface designed to permit such future applications? A-07: Yes (cf. [22]). Q-08: (Andrew Morton [21] and others) Now I think about it, why a new syscall? This thing is looking rather like an ioctl? A-08: This has been extensively discussed. It was agreed that a syscall is preferred for a variety or reasons. Here are just a few taken from prior threads. Syscalls are safer than ioctl()s especially when signaling to fds. Processes are a core kernel concept so a syscall seems more appropriate. The layout of the syscall with its four arguments would require the addition of a custom struct for the ioctl() thereby causing at least the same amount or even more complexity for userspace than a simple syscall. The new syscall will replace multiple other pid-based syscalls (see description above). The file-descriptors-for-processes concept introduced with this syscall will be extended with other syscalls in the future. See also [22], [23] and various other threads already linked in here. Q-09: (Florian Weimer [24]) What happens if you use the new interface with an O_PATH descriptor? A-09: pidfds opened as O_PATH fds cannot be used to send signals to a process (cf. [2]). Signaling processes through pidfds is the equivalent of writing to a file. Thus, this is not an operation that operates "purely at the file descriptor level" as required by the open(2) manpage. See also [4]. /* References */ [1]: https://lore.kernel.org/lkml/20181029221037.87724-1-dancol@google.com/ [2]: https://lore.kernel.org/lkml/874lbtjvtd.fsf@oldenburg2.str.redhat.com/ [3]: https://lore.kernel.org/lkml/20181204132604.aspfupwjgjx6fhva@brauner.io/ [4]: https://lore.kernel.org/lkml/20181203180224.fkvw4kajtbvru2ku@brauner.io/ [5]: https://lore.kernel.org/lkml/20181121213946.GA10795@mail.hallyn.com/ [6]: https://lore.kernel.org/lkml/20181120103111.etlqp7zop34v6nv4@brauner.io/ [7]: https://lore.kernel.org/lkml/36323361-90BD-41AF-AB5B-EE0D7BA02C21@amacapital.net/ [8]: https://lore.kernel.org/lkml/87tvjxp8pc.fsf@xmission.com/ [9]: https://asciinema.org/a/IQjuCHew6bnq1cr78yuMv16cy [11]: https://lore.kernel.org/lkml/F53D6D38-3521-4C20-9034-5AF447DF62FF@amacapital.net/ [12]: https://lore.kernel.org/lkml/87zhtjn8ck.fsf@xmission.com/ [13]: https://lore.kernel.org/lkml/871s6u9z6u.fsf@xmission.com/ [14]: https://lore.kernel.org/lkml/20181206231742.xxi4ghn24z4h2qki@brauner.io/ [15]: https://lore.kernel.org/lkml/20181207003124.GA11160@mail.hallyn.com/ [16]: https://lore.kernel.org/lkml/20181207015423.4miorx43l3qhppfz@brauner.io/ [17]: https://lore.kernel.org/lkml/CAGXu5jL8PciZAXvOvCeCU3wKUEB_dU-O3q0tDw4uB_ojMvDEew@mail.gmail.com/ [18]: https://lore.kernel.org/lkml/20181206222746.GB9224@mail.hallyn.com/ [19]: https://lore.kernel.org/lkml/20181208054059.19813-1-christian@brauner.io/ [20]: https://lore.kernel.org/lkml/8736rebl9s.fsf@oldenburg.str.redhat.com/ [21]: https://lore.kernel.org/lkml/20181228152012.dbf0508c2508138efc5f2bbe@linux-foundation.org/ [22]: https://lore.kernel.org/lkml/20181228233725.722tdfgijxcssg76@brauner.io/ [23]: https://lwn.net/Articles/773459/ [24]: https://lore.kernel.org/lkml/8736rebl9s.fsf@oldenburg.str.redhat.com/ [25]: https://lore.kernel.org/lkml/CAK8P3a0ej9NcJM8wXNPbcGUyOUZYX+VLoDFdbenW3s3114oQZw@mail.gmail.com/ Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Jann Horn <jannh@google.com> Cc: Andy Lutomirsky <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Florian Weimer <fweimer@redhat.com> Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Tycho Andersen <tycho@tycho.ws> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Serge Hallyn <serge@hallyn.com> Acked-by: Aleksa Sarai <cyphar@cyphar.com>
2018-11-18 23:51:56 +00:00
/**
signal: improve comments Improve the comments for pidfd_send_signal(). First, the comment still referred to a file descriptor for a process as a "task file descriptor" which stems from way back at the beginning of the discussion. Replace this with "pidfd" for consistency. Second, the wording for the explanation of the arguments to the syscall was a bit inconsistent, e.g. some used the past tense some used present tense. Make the wording more consistent. Signed-off-by: Christian Brauner <christian@brauner.io>
2019-06-04 13:18:43 +00:00
* sys_pidfd_send_signal - Signal a process through a pidfd
* @pidfd: file descriptor of the process
* @sig: signal to send
* @info: signal info
* @flags: future flags
signal: add pidfd_send_signal() syscall The kill() syscall operates on process identifiers (pid). After a process has exited its pid can be reused by another process. If a caller sends a signal to a reused pid it will end up signaling the wrong process. This issue has often surfaced and there has been a push to address this problem [1]. This patch uses file descriptors (fd) from proc/<pid> as stable handles on struct pid. Even if a pid is recycled the handle will not change. The fd can be used to send signals to the process it refers to. Thus, the new syscall pidfd_send_signal() is introduced to solve this problem. Instead of pids it operates on process fds (pidfd). /* prototype and argument /* long pidfd_send_signal(int pidfd, int sig, siginfo_t *info, unsigned int flags); /* syscall number 424 */ The syscall number was chosen to be 424 to align with Arnd's rework in his y2038 to minimize merge conflicts (cf. [25]). In addition to the pidfd and signal argument it takes an additional siginfo_t and flags argument. If the siginfo_t argument is NULL then pidfd_send_signal() is equivalent to kill(<positive-pid>, <signal>). If it is not NULL pidfd_send_signal() is equivalent to rt_sigqueueinfo(). The flags argument is added to allow for future extensions of this syscall. It currently needs to be passed as 0. Failing to do so will cause EINVAL. /* pidfd_send_signal() replaces multiple pid-based syscalls */ The pidfd_send_signal() syscall currently takes on the job of rt_sigqueueinfo(2) and parts of the functionality of kill(2), Namely, when a positive pid is passed to kill(2). It will however be possible to also replace tgkill(2) and rt_tgsigqueueinfo(2) if this syscall is extended. /* sending signals to threads (tid) and process groups (pgid) */ Specifically, the pidfd_send_signal() syscall does currently not operate on process groups or threads. This is left for future extensions. In order to extend the syscall to allow sending signal to threads and process groups appropriately named flags (e.g. PIDFD_TYPE_PGID, and PIDFD_TYPE_TID) should be added. This implies that the flags argument will determine what is signaled and not the file descriptor itself. Put in other words, grouping in this api is a property of the flags argument not a property of the file descriptor (cf. [13]). Clarification for this has been requested by Eric (cf. [19]). When appropriate extensions through the flags argument are added then pidfd_send_signal() can additionally replace the part of kill(2) which operates on process groups as well as the tgkill(2) and rt_tgsigqueueinfo(2) syscalls. How such an extension could be implemented has been very roughly sketched in [14], [15], and [16]. However, this should not be taken as a commitment to a particular implementation. There might be better ways to do it. Right now this is intentionally left out to keep this patchset as simple as possible (cf. [4]). /* naming */ The syscall had various names throughout iterations of this patchset: - procfd_signal() - procfd_send_signal() - taskfd_send_signal() In the last round of reviews it was pointed out that given that if the flags argument decides the scope of the signal instead of different types of fds it might make sense to either settle for "procfd_" or "pidfd_" as prefix. The community was willing to accept either (cf. [17] and [18]). Given that one developer expressed strong preference for the "pidfd_" prefix (cf. [13]) and with other developers less opinionated about the name we should settle for "pidfd_" to avoid further bikeshedding. The "_send_signal" suffix was chosen to reflect the fact that the syscall takes on the job of multiple syscalls. It is therefore intentional that the name is not reminiscent of neither kill(2) nor rt_sigqueueinfo(2). Not the fomer because it might imply that pidfd_send_signal() is a replacement for kill(2), and not the latter because it is a hassle to remember the correct spelling - especially for non-native speakers - and because it is not descriptive enough of what the syscall actually does. The name "pidfd_send_signal" makes it very clear that its job is to send signals. /* zombies */ Zombies can be signaled just as any other process. No special error will be reported since a zombie state is an unreliable state (cf. [3]). However, this can be added as an extension through the @flags argument if the need ever arises. /* cross-namespace signals */ The patch currently enforces that the signaler and signalee either are in the same pid namespace or that the signaler's pid namespace is an ancestor of the signalee's pid namespace. This is done for the sake of simplicity and because it is unclear to what values certain members of struct siginfo_t would need to be set to (cf. [5], [6]). /* compat syscalls */ It became clear that we would like to avoid adding compat syscalls (cf. [7]). The compat syscall handling is now done in kernel/signal.c itself by adding __copy_siginfo_from_user_generic() which lets us avoid compat syscalls (cf. [8]). It should be noted that the addition of __copy_siginfo_from_user_any() is caused by a bug in the original implementation of rt_sigqueueinfo(2) (cf. 12). With upcoming rework for syscall handling things might improve significantly (cf. [11]) and __copy_siginfo_from_user_any() will not gain any additional callers. /* testing */ This patch was tested on x64 and x86. /* userspace usage */ An asciinema recording for the basic functionality can be found under [9]. With this patch a process can be killed via: #define _GNU_SOURCE #include <errno.h> #include <fcntl.h> #include <signal.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/stat.h> #include <sys/syscall.h> #include <sys/types.h> #include <unistd.h> static inline int do_pidfd_send_signal(int pidfd, int sig, siginfo_t *info, unsigned int flags) { #ifdef __NR_pidfd_send_signal return syscall(__NR_pidfd_send_signal, pidfd, sig, info, flags); #else return -ENOSYS; #endif } int main(int argc, char *argv[]) { int fd, ret, saved_errno, sig; if (argc < 3) exit(EXIT_FAILURE); fd = open(argv[1], O_DIRECTORY | O_CLOEXEC); if (fd < 0) { printf("%s - Failed to open \"%s\"\n", strerror(errno), argv[1]); exit(EXIT_FAILURE); } sig = atoi(argv[2]); printf("Sending signal %d to process %s\n", sig, argv[1]); ret = do_pidfd_send_signal(fd, sig, NULL, 0); saved_errno = errno; close(fd); errno = saved_errno; if (ret < 0) { printf("%s - Failed to send signal %d to process %s\n", strerror(errno), sig, argv[1]); exit(EXIT_FAILURE); } exit(EXIT_SUCCESS); } /* Q&A * Given that it seems the same questions get asked again by people who are * late to the party it makes sense to add a Q&A section to the commit * message so it's hopefully easier to avoid duplicate threads. * * For the sake of progress please consider these arguments settled unless * there is a new point that desperately needs to be addressed. Please make * sure to check the links to the threads in this commit message whether * this has not already been covered. */ Q-01: (Florian Weimer [20], Andrew Morton [21]) What happens when the target process has exited? A-01: Sending the signal will fail with ESRCH (cf. [22]). Q-02: (Andrew Morton [21]) Is the task_struct pinned by the fd? A-02: No. A reference to struct pid is kept. struct pid - as far as I understand - was created exactly for the reason to not require to pin struct task_struct (cf. [22]). Q-03: (Andrew Morton [21]) Does the entire procfs directory remain visible? Just one entry within it? A-03: The same thing that happens right now when you hold a file descriptor to /proc/<pid> open (cf. [22]). Q-04: (Andrew Morton [21]) Does the pid remain reserved? A-04: No. This patchset guarantees a stable handle not that pids are not recycled (cf. [22]). Q-05: (Andrew Morton [21]) Do attempts to signal that fd return errors? A-05: See {Q,A}-01. Q-06: (Andrew Morton [22]) Is there a cleaner way of obtaining the fd? Another syscall perhaps. A-06: Userspace can already trivially retrieve file descriptors from procfs so this is something that we will need to support anyway. Hence, there's no immediate need to add another syscalls just to make pidfd_send_signal() not dependent on the presence of procfs. However, adding a syscalls to get such file descriptors is planned for a future patchset (cf. [22]). Q-07: (Andrew Morton [21] and others) This fd-for-a-process sounds like a handy thing and people may well think up other uses for it in the future, probably unrelated to signals. Are the code and the interface designed to permit such future applications? A-07: Yes (cf. [22]). Q-08: (Andrew Morton [21] and others) Now I think about it, why a new syscall? This thing is looking rather like an ioctl? A-08: This has been extensively discussed. It was agreed that a syscall is preferred for a variety or reasons. Here are just a few taken from prior threads. Syscalls are safer than ioctl()s especially when signaling to fds. Processes are a core kernel concept so a syscall seems more appropriate. The layout of the syscall with its four arguments would require the addition of a custom struct for the ioctl() thereby causing at least the same amount or even more complexity for userspace than a simple syscall. The new syscall will replace multiple other pid-based syscalls (see description above). The file-descriptors-for-processes concept introduced with this syscall will be extended with other syscalls in the future. See also [22], [23] and various other threads already linked in here. Q-09: (Florian Weimer [24]) What happens if you use the new interface with an O_PATH descriptor? A-09: pidfds opened as O_PATH fds cannot be used to send signals to a process (cf. [2]). Signaling processes through pidfds is the equivalent of writing to a file. Thus, this is not an operation that operates "purely at the file descriptor level" as required by the open(2) manpage. See also [4]. /* References */ [1]: https://lore.kernel.org/lkml/20181029221037.87724-1-dancol@google.com/ [2]: https://lore.kernel.org/lkml/874lbtjvtd.fsf@oldenburg2.str.redhat.com/ [3]: https://lore.kernel.org/lkml/20181204132604.aspfupwjgjx6fhva@brauner.io/ [4]: https://lore.kernel.org/lkml/20181203180224.fkvw4kajtbvru2ku@brauner.io/ [5]: https://lore.kernel.org/lkml/20181121213946.GA10795@mail.hallyn.com/ [6]: https://lore.kernel.org/lkml/20181120103111.etlqp7zop34v6nv4@brauner.io/ [7]: https://lore.kernel.org/lkml/36323361-90BD-41AF-AB5B-EE0D7BA02C21@amacapital.net/ [8]: https://lore.kernel.org/lkml/87tvjxp8pc.fsf@xmission.com/ [9]: https://asciinema.org/a/IQjuCHew6bnq1cr78yuMv16cy [11]: https://lore.kernel.org/lkml/F53D6D38-3521-4C20-9034-5AF447DF62FF@amacapital.net/ [12]: https://lore.kernel.org/lkml/87zhtjn8ck.fsf@xmission.com/ [13]: https://lore.kernel.org/lkml/871s6u9z6u.fsf@xmission.com/ [14]: https://lore.kernel.org/lkml/20181206231742.xxi4ghn24z4h2qki@brauner.io/ [15]: https://lore.kernel.org/lkml/20181207003124.GA11160@mail.hallyn.com/ [16]: https://lore.kernel.org/lkml/20181207015423.4miorx43l3qhppfz@brauner.io/ [17]: https://lore.kernel.org/lkml/CAGXu5jL8PciZAXvOvCeCU3wKUEB_dU-O3q0tDw4uB_ojMvDEew@mail.gmail.com/ [18]: https://lore.kernel.org/lkml/20181206222746.GB9224@mail.hallyn.com/ [19]: https://lore.kernel.org/lkml/20181208054059.19813-1-christian@brauner.io/ [20]: https://lore.kernel.org/lkml/8736rebl9s.fsf@oldenburg.str.redhat.com/ [21]: https://lore.kernel.org/lkml/20181228152012.dbf0508c2508138efc5f2bbe@linux-foundation.org/ [22]: https://lore.kernel.org/lkml/20181228233725.722tdfgijxcssg76@brauner.io/ [23]: https://lwn.net/Articles/773459/ [24]: https://lore.kernel.org/lkml/8736rebl9s.fsf@oldenburg.str.redhat.com/ [25]: https://lore.kernel.org/lkml/CAK8P3a0ej9NcJM8wXNPbcGUyOUZYX+VLoDFdbenW3s3114oQZw@mail.gmail.com/ Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Jann Horn <jannh@google.com> Cc: Andy Lutomirsky <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Florian Weimer <fweimer@redhat.com> Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Tycho Andersen <tycho@tycho.ws> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Serge Hallyn <serge@hallyn.com> Acked-by: Aleksa Sarai <cyphar@cyphar.com>
2018-11-18 23:51:56 +00:00
*
* The syscall currently only signals via PIDTYPE_PID which covers
* kill(<positive-pid>, <signal>. It does not signal threads or process
* groups.
* In order to extend the syscall to threads and process groups the @flags
* argument should be used. In essence, the @flags argument will determine
* what is signaled and not the file descriptor itself. Put in other words,
* grouping is a property of the flags argument not a property of the file
* descriptor.
*
* Return: 0 on success, negative errno on failure
*/
SYSCALL_DEFINE4(pidfd_send_signal, int, pidfd, int, sig,
siginfo_t __user *, info, unsigned int, flags)
{
int ret;
struct fd f;
struct pid *pid;
kernel_siginfo_t kinfo;
/* Enforce flags be set to 0 until we add an extension. */
if (flags)
return -EINVAL;
signal: use fdget() since we don't allow O_PATH As stated in the original commit for pidfd_send_signal() we don't allow to signal processes through O_PATH file descriptors since it is semantically equivalent to a write on the pidfd. We already correctly error out right now and return EBADF if an O_PATH fd is passed. This is because we use file->f_op to detect whether a pidfd is passed and O_PATH fds have their file->f_op set to empty_fops in do_dentry_open() and thus fail the test. Thus, there is no regression. It's just semantically correct to use fdget() and return an error right from there instead of taking a reference and returning an error later. Signed-off-by: Christian Brauner <christian@brauner.io> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Kees Cook <keescook@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jann Horn <jann@thejh.net> Cc: David Howells <dhowells@redhat.com> Cc: "Michael Kerrisk (man-pages)" <mtk.manpages@gmail.com> Cc: Andy Lutomirsky <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-18 10:18:39 +00:00
f = fdget(pidfd);
signal: add pidfd_send_signal() syscall The kill() syscall operates on process identifiers (pid). After a process has exited its pid can be reused by another process. If a caller sends a signal to a reused pid it will end up signaling the wrong process. This issue has often surfaced and there has been a push to address this problem [1]. This patch uses file descriptors (fd) from proc/<pid> as stable handles on struct pid. Even if a pid is recycled the handle will not change. The fd can be used to send signals to the process it refers to. Thus, the new syscall pidfd_send_signal() is introduced to solve this problem. Instead of pids it operates on process fds (pidfd). /* prototype and argument /* long pidfd_send_signal(int pidfd, int sig, siginfo_t *info, unsigned int flags); /* syscall number 424 */ The syscall number was chosen to be 424 to align with Arnd's rework in his y2038 to minimize merge conflicts (cf. [25]). In addition to the pidfd and signal argument it takes an additional siginfo_t and flags argument. If the siginfo_t argument is NULL then pidfd_send_signal() is equivalent to kill(<positive-pid>, <signal>). If it is not NULL pidfd_send_signal() is equivalent to rt_sigqueueinfo(). The flags argument is added to allow for future extensions of this syscall. It currently needs to be passed as 0. Failing to do so will cause EINVAL. /* pidfd_send_signal() replaces multiple pid-based syscalls */ The pidfd_send_signal() syscall currently takes on the job of rt_sigqueueinfo(2) and parts of the functionality of kill(2), Namely, when a positive pid is passed to kill(2). It will however be possible to also replace tgkill(2) and rt_tgsigqueueinfo(2) if this syscall is extended. /* sending signals to threads (tid) and process groups (pgid) */ Specifically, the pidfd_send_signal() syscall does currently not operate on process groups or threads. This is left for future extensions. In order to extend the syscall to allow sending signal to threads and process groups appropriately named flags (e.g. PIDFD_TYPE_PGID, and PIDFD_TYPE_TID) should be added. This implies that the flags argument will determine what is signaled and not the file descriptor itself. Put in other words, grouping in this api is a property of the flags argument not a property of the file descriptor (cf. [13]). Clarification for this has been requested by Eric (cf. [19]). When appropriate extensions through the flags argument are added then pidfd_send_signal() can additionally replace the part of kill(2) which operates on process groups as well as the tgkill(2) and rt_tgsigqueueinfo(2) syscalls. How such an extension could be implemented has been very roughly sketched in [14], [15], and [16]. However, this should not be taken as a commitment to a particular implementation. There might be better ways to do it. Right now this is intentionally left out to keep this patchset as simple as possible (cf. [4]). /* naming */ The syscall had various names throughout iterations of this patchset: - procfd_signal() - procfd_send_signal() - taskfd_send_signal() In the last round of reviews it was pointed out that given that if the flags argument decides the scope of the signal instead of different types of fds it might make sense to either settle for "procfd_" or "pidfd_" as prefix. The community was willing to accept either (cf. [17] and [18]). Given that one developer expressed strong preference for the "pidfd_" prefix (cf. [13]) and with other developers less opinionated about the name we should settle for "pidfd_" to avoid further bikeshedding. The "_send_signal" suffix was chosen to reflect the fact that the syscall takes on the job of multiple syscalls. It is therefore intentional that the name is not reminiscent of neither kill(2) nor rt_sigqueueinfo(2). Not the fomer because it might imply that pidfd_send_signal() is a replacement for kill(2), and not the latter because it is a hassle to remember the correct spelling - especially for non-native speakers - and because it is not descriptive enough of what the syscall actually does. The name "pidfd_send_signal" makes it very clear that its job is to send signals. /* zombies */ Zombies can be signaled just as any other process. No special error will be reported since a zombie state is an unreliable state (cf. [3]). However, this can be added as an extension through the @flags argument if the need ever arises. /* cross-namespace signals */ The patch currently enforces that the signaler and signalee either are in the same pid namespace or that the signaler's pid namespace is an ancestor of the signalee's pid namespace. This is done for the sake of simplicity and because it is unclear to what values certain members of struct siginfo_t would need to be set to (cf. [5], [6]). /* compat syscalls */ It became clear that we would like to avoid adding compat syscalls (cf. [7]). The compat syscall handling is now done in kernel/signal.c itself by adding __copy_siginfo_from_user_generic() which lets us avoid compat syscalls (cf. [8]). It should be noted that the addition of __copy_siginfo_from_user_any() is caused by a bug in the original implementation of rt_sigqueueinfo(2) (cf. 12). With upcoming rework for syscall handling things might improve significantly (cf. [11]) and __copy_siginfo_from_user_any() will not gain any additional callers. /* testing */ This patch was tested on x64 and x86. /* userspace usage */ An asciinema recording for the basic functionality can be found under [9]. With this patch a process can be killed via: #define _GNU_SOURCE #include <errno.h> #include <fcntl.h> #include <signal.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/stat.h> #include <sys/syscall.h> #include <sys/types.h> #include <unistd.h> static inline int do_pidfd_send_signal(int pidfd, int sig, siginfo_t *info, unsigned int flags) { #ifdef __NR_pidfd_send_signal return syscall(__NR_pidfd_send_signal, pidfd, sig, info, flags); #else return -ENOSYS; #endif } int main(int argc, char *argv[]) { int fd, ret, saved_errno, sig; if (argc < 3) exit(EXIT_FAILURE); fd = open(argv[1], O_DIRECTORY | O_CLOEXEC); if (fd < 0) { printf("%s - Failed to open \"%s\"\n", strerror(errno), argv[1]); exit(EXIT_FAILURE); } sig = atoi(argv[2]); printf("Sending signal %d to process %s\n", sig, argv[1]); ret = do_pidfd_send_signal(fd, sig, NULL, 0); saved_errno = errno; close(fd); errno = saved_errno; if (ret < 0) { printf("%s - Failed to send signal %d to process %s\n", strerror(errno), sig, argv[1]); exit(EXIT_FAILURE); } exit(EXIT_SUCCESS); } /* Q&A * Given that it seems the same questions get asked again by people who are * late to the party it makes sense to add a Q&A section to the commit * message so it's hopefully easier to avoid duplicate threads. * * For the sake of progress please consider these arguments settled unless * there is a new point that desperately needs to be addressed. Please make * sure to check the links to the threads in this commit message whether * this has not already been covered. */ Q-01: (Florian Weimer [20], Andrew Morton [21]) What happens when the target process has exited? A-01: Sending the signal will fail with ESRCH (cf. [22]). Q-02: (Andrew Morton [21]) Is the task_struct pinned by the fd? A-02: No. A reference to struct pid is kept. struct pid - as far as I understand - was created exactly for the reason to not require to pin struct task_struct (cf. [22]). Q-03: (Andrew Morton [21]) Does the entire procfs directory remain visible? Just one entry within it? A-03: The same thing that happens right now when you hold a file descriptor to /proc/<pid> open (cf. [22]). Q-04: (Andrew Morton [21]) Does the pid remain reserved? A-04: No. This patchset guarantees a stable handle not that pids are not recycled (cf. [22]). Q-05: (Andrew Morton [21]) Do attempts to signal that fd return errors? A-05: See {Q,A}-01. Q-06: (Andrew Morton [22]) Is there a cleaner way of obtaining the fd? Another syscall perhaps. A-06: Userspace can already trivially retrieve file descriptors from procfs so this is something that we will need to support anyway. Hence, there's no immediate need to add another syscalls just to make pidfd_send_signal() not dependent on the presence of procfs. However, adding a syscalls to get such file descriptors is planned for a future patchset (cf. [22]). Q-07: (Andrew Morton [21] and others) This fd-for-a-process sounds like a handy thing and people may well think up other uses for it in the future, probably unrelated to signals. Are the code and the interface designed to permit such future applications? A-07: Yes (cf. [22]). Q-08: (Andrew Morton [21] and others) Now I think about it, why a new syscall? This thing is looking rather like an ioctl? A-08: This has been extensively discussed. It was agreed that a syscall is preferred for a variety or reasons. Here are just a few taken from prior threads. Syscalls are safer than ioctl()s especially when signaling to fds. Processes are a core kernel concept so a syscall seems more appropriate. The layout of the syscall with its four arguments would require the addition of a custom struct for the ioctl() thereby causing at least the same amount or even more complexity for userspace than a simple syscall. The new syscall will replace multiple other pid-based syscalls (see description above). The file-descriptors-for-processes concept introduced with this syscall will be extended with other syscalls in the future. See also [22], [23] and various other threads already linked in here. Q-09: (Florian Weimer [24]) What happens if you use the new interface with an O_PATH descriptor? A-09: pidfds opened as O_PATH fds cannot be used to send signals to a process (cf. [2]). Signaling processes through pidfds is the equivalent of writing to a file. Thus, this is not an operation that operates "purely at the file descriptor level" as required by the open(2) manpage. See also [4]. /* References */ [1]: https://lore.kernel.org/lkml/20181029221037.87724-1-dancol@google.com/ [2]: https://lore.kernel.org/lkml/874lbtjvtd.fsf@oldenburg2.str.redhat.com/ [3]: https://lore.kernel.org/lkml/20181204132604.aspfupwjgjx6fhva@brauner.io/ [4]: https://lore.kernel.org/lkml/20181203180224.fkvw4kajtbvru2ku@brauner.io/ [5]: https://lore.kernel.org/lkml/20181121213946.GA10795@mail.hallyn.com/ [6]: https://lore.kernel.org/lkml/20181120103111.etlqp7zop34v6nv4@brauner.io/ [7]: https://lore.kernel.org/lkml/36323361-90BD-41AF-AB5B-EE0D7BA02C21@amacapital.net/ [8]: https://lore.kernel.org/lkml/87tvjxp8pc.fsf@xmission.com/ [9]: https://asciinema.org/a/IQjuCHew6bnq1cr78yuMv16cy [11]: https://lore.kernel.org/lkml/F53D6D38-3521-4C20-9034-5AF447DF62FF@amacapital.net/ [12]: https://lore.kernel.org/lkml/87zhtjn8ck.fsf@xmission.com/ [13]: https://lore.kernel.org/lkml/871s6u9z6u.fsf@xmission.com/ [14]: https://lore.kernel.org/lkml/20181206231742.xxi4ghn24z4h2qki@brauner.io/ [15]: https://lore.kernel.org/lkml/20181207003124.GA11160@mail.hallyn.com/ [16]: https://lore.kernel.org/lkml/20181207015423.4miorx43l3qhppfz@brauner.io/ [17]: https://lore.kernel.org/lkml/CAGXu5jL8PciZAXvOvCeCU3wKUEB_dU-O3q0tDw4uB_ojMvDEew@mail.gmail.com/ [18]: https://lore.kernel.org/lkml/20181206222746.GB9224@mail.hallyn.com/ [19]: https://lore.kernel.org/lkml/20181208054059.19813-1-christian@brauner.io/ [20]: https://lore.kernel.org/lkml/8736rebl9s.fsf@oldenburg.str.redhat.com/ [21]: https://lore.kernel.org/lkml/20181228152012.dbf0508c2508138efc5f2bbe@linux-foundation.org/ [22]: https://lore.kernel.org/lkml/20181228233725.722tdfgijxcssg76@brauner.io/ [23]: https://lwn.net/Articles/773459/ [24]: https://lore.kernel.org/lkml/8736rebl9s.fsf@oldenburg.str.redhat.com/ [25]: https://lore.kernel.org/lkml/CAK8P3a0ej9NcJM8wXNPbcGUyOUZYX+VLoDFdbenW3s3114oQZw@mail.gmail.com/ Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Jann Horn <jannh@google.com> Cc: Andy Lutomirsky <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Florian Weimer <fweimer@redhat.com> Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Tycho Andersen <tycho@tycho.ws> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Serge Hallyn <serge@hallyn.com> Acked-by: Aleksa Sarai <cyphar@cyphar.com>
2018-11-18 23:51:56 +00:00
if (!f.file)
return -EBADF;
/* Is this a pidfd? */
signal: support CLONE_PIDFD with pidfd_send_signal Let pidfd_send_signal() use pidfds retrieved via CLONE_PIDFD. With this patch pidfd_send_signal() becomes independent of procfs. This fullfils the request made when we merged the pidfd_send_signal() patchset. The pidfd_send_signal() syscall is now always available allowing for it to be used by users without procfs mounted or even users without procfs support compiled into the kernel. Signed-off-by: Christian Brauner <christian@brauner.io> Co-developed-by: Jann Horn <jannh@google.com> Signed-off-by: Jann Horn <jannh@google.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Kees Cook <keescook@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: David Howells <dhowells@redhat.com> Cc: "Michael Kerrisk (man-pages)" <mtk.manpages@gmail.com> Cc: Andy Lutomirsky <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk>
2019-04-17 20:50:25 +00:00
pid = pidfd_to_pid(f.file);
signal: add pidfd_send_signal() syscall The kill() syscall operates on process identifiers (pid). After a process has exited its pid can be reused by another process. If a caller sends a signal to a reused pid it will end up signaling the wrong process. This issue has often surfaced and there has been a push to address this problem [1]. This patch uses file descriptors (fd) from proc/<pid> as stable handles on struct pid. Even if a pid is recycled the handle will not change. The fd can be used to send signals to the process it refers to. Thus, the new syscall pidfd_send_signal() is introduced to solve this problem. Instead of pids it operates on process fds (pidfd). /* prototype and argument /* long pidfd_send_signal(int pidfd, int sig, siginfo_t *info, unsigned int flags); /* syscall number 424 */ The syscall number was chosen to be 424 to align with Arnd's rework in his y2038 to minimize merge conflicts (cf. [25]). In addition to the pidfd and signal argument it takes an additional siginfo_t and flags argument. If the siginfo_t argument is NULL then pidfd_send_signal() is equivalent to kill(<positive-pid>, <signal>). If it is not NULL pidfd_send_signal() is equivalent to rt_sigqueueinfo(). The flags argument is added to allow for future extensions of this syscall. It currently needs to be passed as 0. Failing to do so will cause EINVAL. /* pidfd_send_signal() replaces multiple pid-based syscalls */ The pidfd_send_signal() syscall currently takes on the job of rt_sigqueueinfo(2) and parts of the functionality of kill(2), Namely, when a positive pid is passed to kill(2). It will however be possible to also replace tgkill(2) and rt_tgsigqueueinfo(2) if this syscall is extended. /* sending signals to threads (tid) and process groups (pgid) */ Specifically, the pidfd_send_signal() syscall does currently not operate on process groups or threads. This is left for future extensions. In order to extend the syscall to allow sending signal to threads and process groups appropriately named flags (e.g. PIDFD_TYPE_PGID, and PIDFD_TYPE_TID) should be added. This implies that the flags argument will determine what is signaled and not the file descriptor itself. Put in other words, grouping in this api is a property of the flags argument not a property of the file descriptor (cf. [13]). Clarification for this has been requested by Eric (cf. [19]). When appropriate extensions through the flags argument are added then pidfd_send_signal() can additionally replace the part of kill(2) which operates on process groups as well as the tgkill(2) and rt_tgsigqueueinfo(2) syscalls. How such an extension could be implemented has been very roughly sketched in [14], [15], and [16]. However, this should not be taken as a commitment to a particular implementation. There might be better ways to do it. Right now this is intentionally left out to keep this patchset as simple as possible (cf. [4]). /* naming */ The syscall had various names throughout iterations of this patchset: - procfd_signal() - procfd_send_signal() - taskfd_send_signal() In the last round of reviews it was pointed out that given that if the flags argument decides the scope of the signal instead of different types of fds it might make sense to either settle for "procfd_" or "pidfd_" as prefix. The community was willing to accept either (cf. [17] and [18]). Given that one developer expressed strong preference for the "pidfd_" prefix (cf. [13]) and with other developers less opinionated about the name we should settle for "pidfd_" to avoid further bikeshedding. The "_send_signal" suffix was chosen to reflect the fact that the syscall takes on the job of multiple syscalls. It is therefore intentional that the name is not reminiscent of neither kill(2) nor rt_sigqueueinfo(2). Not the fomer because it might imply that pidfd_send_signal() is a replacement for kill(2), and not the latter because it is a hassle to remember the correct spelling - especially for non-native speakers - and because it is not descriptive enough of what the syscall actually does. The name "pidfd_send_signal" makes it very clear that its job is to send signals. /* zombies */ Zombies can be signaled just as any other process. No special error will be reported since a zombie state is an unreliable state (cf. [3]). However, this can be added as an extension through the @flags argument if the need ever arises. /* cross-namespace signals */ The patch currently enforces that the signaler and signalee either are in the same pid namespace or that the signaler's pid namespace is an ancestor of the signalee's pid namespace. This is done for the sake of simplicity and because it is unclear to what values certain members of struct siginfo_t would need to be set to (cf. [5], [6]). /* compat syscalls */ It became clear that we would like to avoid adding compat syscalls (cf. [7]). The compat syscall handling is now done in kernel/signal.c itself by adding __copy_siginfo_from_user_generic() which lets us avoid compat syscalls (cf. [8]). It should be noted that the addition of __copy_siginfo_from_user_any() is caused by a bug in the original implementation of rt_sigqueueinfo(2) (cf. 12). With upcoming rework for syscall handling things might improve significantly (cf. [11]) and __copy_siginfo_from_user_any() will not gain any additional callers. /* testing */ This patch was tested on x64 and x86. /* userspace usage */ An asciinema recording for the basic functionality can be found under [9]. With this patch a process can be killed via: #define _GNU_SOURCE #include <errno.h> #include <fcntl.h> #include <signal.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/stat.h> #include <sys/syscall.h> #include <sys/types.h> #include <unistd.h> static inline int do_pidfd_send_signal(int pidfd, int sig, siginfo_t *info, unsigned int flags) { #ifdef __NR_pidfd_send_signal return syscall(__NR_pidfd_send_signal, pidfd, sig, info, flags); #else return -ENOSYS; #endif } int main(int argc, char *argv[]) { int fd, ret, saved_errno, sig; if (argc < 3) exit(EXIT_FAILURE); fd = open(argv[1], O_DIRECTORY | O_CLOEXEC); if (fd < 0) { printf("%s - Failed to open \"%s\"\n", strerror(errno), argv[1]); exit(EXIT_FAILURE); } sig = atoi(argv[2]); printf("Sending signal %d to process %s\n", sig, argv[1]); ret = do_pidfd_send_signal(fd, sig, NULL, 0); saved_errno = errno; close(fd); errno = saved_errno; if (ret < 0) { printf("%s - Failed to send signal %d to process %s\n", strerror(errno), sig, argv[1]); exit(EXIT_FAILURE); } exit(EXIT_SUCCESS); } /* Q&A * Given that it seems the same questions get asked again by people who are * late to the party it makes sense to add a Q&A section to the commit * message so it's hopefully easier to avoid duplicate threads. * * For the sake of progress please consider these arguments settled unless * there is a new point that desperately needs to be addressed. Please make * sure to check the links to the threads in this commit message whether * this has not already been covered. */ Q-01: (Florian Weimer [20], Andrew Morton [21]) What happens when the target process has exited? A-01: Sending the signal will fail with ESRCH (cf. [22]). Q-02: (Andrew Morton [21]) Is the task_struct pinned by the fd? A-02: No. A reference to struct pid is kept. struct pid - as far as I understand - was created exactly for the reason to not require to pin struct task_struct (cf. [22]). Q-03: (Andrew Morton [21]) Does the entire procfs directory remain visible? Just one entry within it? A-03: The same thing that happens right now when you hold a file descriptor to /proc/<pid> open (cf. [22]). Q-04: (Andrew Morton [21]) Does the pid remain reserved? A-04: No. This patchset guarantees a stable handle not that pids are not recycled (cf. [22]). Q-05: (Andrew Morton [21]) Do attempts to signal that fd return errors? A-05: See {Q,A}-01. Q-06: (Andrew Morton [22]) Is there a cleaner way of obtaining the fd? Another syscall perhaps. A-06: Userspace can already trivially retrieve file descriptors from procfs so this is something that we will need to support anyway. Hence, there's no immediate need to add another syscalls just to make pidfd_send_signal() not dependent on the presence of procfs. However, adding a syscalls to get such file descriptors is planned for a future patchset (cf. [22]). Q-07: (Andrew Morton [21] and others) This fd-for-a-process sounds like a handy thing and people may well think up other uses for it in the future, probably unrelated to signals. Are the code and the interface designed to permit such future applications? A-07: Yes (cf. [22]). Q-08: (Andrew Morton [21] and others) Now I think about it, why a new syscall? This thing is looking rather like an ioctl? A-08: This has been extensively discussed. It was agreed that a syscall is preferred for a variety or reasons. Here are just a few taken from prior threads. Syscalls are safer than ioctl()s especially when signaling to fds. Processes are a core kernel concept so a syscall seems more appropriate. The layout of the syscall with its four arguments would require the addition of a custom struct for the ioctl() thereby causing at least the same amount or even more complexity for userspace than a simple syscall. The new syscall will replace multiple other pid-based syscalls (see description above). The file-descriptors-for-processes concept introduced with this syscall will be extended with other syscalls in the future. See also [22], [23] and various other threads already linked in here. Q-09: (Florian Weimer [24]) What happens if you use the new interface with an O_PATH descriptor? A-09: pidfds opened as O_PATH fds cannot be used to send signals to a process (cf. [2]). Signaling processes through pidfds is the equivalent of writing to a file. Thus, this is not an operation that operates "purely at the file descriptor level" as required by the open(2) manpage. See also [4]. /* References */ [1]: https://lore.kernel.org/lkml/20181029221037.87724-1-dancol@google.com/ [2]: https://lore.kernel.org/lkml/874lbtjvtd.fsf@oldenburg2.str.redhat.com/ [3]: https://lore.kernel.org/lkml/20181204132604.aspfupwjgjx6fhva@brauner.io/ [4]: https://lore.kernel.org/lkml/20181203180224.fkvw4kajtbvru2ku@brauner.io/ [5]: https://lore.kernel.org/lkml/20181121213946.GA10795@mail.hallyn.com/ [6]: https://lore.kernel.org/lkml/20181120103111.etlqp7zop34v6nv4@brauner.io/ [7]: https://lore.kernel.org/lkml/36323361-90BD-41AF-AB5B-EE0D7BA02C21@amacapital.net/ [8]: https://lore.kernel.org/lkml/87tvjxp8pc.fsf@xmission.com/ [9]: https://asciinema.org/a/IQjuCHew6bnq1cr78yuMv16cy [11]: https://lore.kernel.org/lkml/F53D6D38-3521-4C20-9034-5AF447DF62FF@amacapital.net/ [12]: https://lore.kernel.org/lkml/87zhtjn8ck.fsf@xmission.com/ [13]: https://lore.kernel.org/lkml/871s6u9z6u.fsf@xmission.com/ [14]: https://lore.kernel.org/lkml/20181206231742.xxi4ghn24z4h2qki@brauner.io/ [15]: https://lore.kernel.org/lkml/20181207003124.GA11160@mail.hallyn.com/ [16]: https://lore.kernel.org/lkml/20181207015423.4miorx43l3qhppfz@brauner.io/ [17]: https://lore.kernel.org/lkml/CAGXu5jL8PciZAXvOvCeCU3wKUEB_dU-O3q0tDw4uB_ojMvDEew@mail.gmail.com/ [18]: https://lore.kernel.org/lkml/20181206222746.GB9224@mail.hallyn.com/ [19]: https://lore.kernel.org/lkml/20181208054059.19813-1-christian@brauner.io/ [20]: https://lore.kernel.org/lkml/8736rebl9s.fsf@oldenburg.str.redhat.com/ [21]: https://lore.kernel.org/lkml/20181228152012.dbf0508c2508138efc5f2bbe@linux-foundation.org/ [22]: https://lore.kernel.org/lkml/20181228233725.722tdfgijxcssg76@brauner.io/ [23]: https://lwn.net/Articles/773459/ [24]: https://lore.kernel.org/lkml/8736rebl9s.fsf@oldenburg.str.redhat.com/ [25]: https://lore.kernel.org/lkml/CAK8P3a0ej9NcJM8wXNPbcGUyOUZYX+VLoDFdbenW3s3114oQZw@mail.gmail.com/ Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Jann Horn <jannh@google.com> Cc: Andy Lutomirsky <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Florian Weimer <fweimer@redhat.com> Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Tycho Andersen <tycho@tycho.ws> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Serge Hallyn <serge@hallyn.com> Acked-by: Aleksa Sarai <cyphar@cyphar.com>
2018-11-18 23:51:56 +00:00
if (IS_ERR(pid)) {
ret = PTR_ERR(pid);
goto err;
}
ret = -EINVAL;
if (!access_pidfd_pidns(pid))
goto err;
if (info) {
ret = copy_siginfo_from_user_any(&kinfo, info);
if (unlikely(ret))
goto err;
ret = -EINVAL;
if (unlikely(sig != kinfo.si_signo))
goto err;
signal: don't silently convert SI_USER signals to non-current pidfd The current sys_pidfd_send_signal() silently turns signals with explicit SI_USER context that are sent to non-current tasks into signals with kernel-generated siginfo. This is unlike do_rt_sigqueueinfo(), which returns -EPERM in this case. If a user actually wants to send a signal with kernel-provided siginfo, they can do that with pidfd_send_signal(pidfd, sig, NULL, 0); so allowing this case is unnecessary. Instead of silently replacing the siginfo, just bail out with an error; this is consistent with other interfaces and avoids special-casing behavior based on security checks. Fixes: 3eb39f47934f ("signal: add pidfd_send_signal() syscall") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Christian Brauner <christian@brauner.io>
2019-03-30 02:12:32 +00:00
/* Only allow sending arbitrary signals to yourself. */
ret = -EPERM;
signal: add pidfd_send_signal() syscall The kill() syscall operates on process identifiers (pid). After a process has exited its pid can be reused by another process. If a caller sends a signal to a reused pid it will end up signaling the wrong process. This issue has often surfaced and there has been a push to address this problem [1]. This patch uses file descriptors (fd) from proc/<pid> as stable handles on struct pid. Even if a pid is recycled the handle will not change. The fd can be used to send signals to the process it refers to. Thus, the new syscall pidfd_send_signal() is introduced to solve this problem. Instead of pids it operates on process fds (pidfd). /* prototype and argument /* long pidfd_send_signal(int pidfd, int sig, siginfo_t *info, unsigned int flags); /* syscall number 424 */ The syscall number was chosen to be 424 to align with Arnd's rework in his y2038 to minimize merge conflicts (cf. [25]). In addition to the pidfd and signal argument it takes an additional siginfo_t and flags argument. If the siginfo_t argument is NULL then pidfd_send_signal() is equivalent to kill(<positive-pid>, <signal>). If it is not NULL pidfd_send_signal() is equivalent to rt_sigqueueinfo(). The flags argument is added to allow for future extensions of this syscall. It currently needs to be passed as 0. Failing to do so will cause EINVAL. /* pidfd_send_signal() replaces multiple pid-based syscalls */ The pidfd_send_signal() syscall currently takes on the job of rt_sigqueueinfo(2) and parts of the functionality of kill(2), Namely, when a positive pid is passed to kill(2). It will however be possible to also replace tgkill(2) and rt_tgsigqueueinfo(2) if this syscall is extended. /* sending signals to threads (tid) and process groups (pgid) */ Specifically, the pidfd_send_signal() syscall does currently not operate on process groups or threads. This is left for future extensions. In order to extend the syscall to allow sending signal to threads and process groups appropriately named flags (e.g. PIDFD_TYPE_PGID, and PIDFD_TYPE_TID) should be added. This implies that the flags argument will determine what is signaled and not the file descriptor itself. Put in other words, grouping in this api is a property of the flags argument not a property of the file descriptor (cf. [13]). Clarification for this has been requested by Eric (cf. [19]). When appropriate extensions through the flags argument are added then pidfd_send_signal() can additionally replace the part of kill(2) which operates on process groups as well as the tgkill(2) and rt_tgsigqueueinfo(2) syscalls. How such an extension could be implemented has been very roughly sketched in [14], [15], and [16]. However, this should not be taken as a commitment to a particular implementation. There might be better ways to do it. Right now this is intentionally left out to keep this patchset as simple as possible (cf. [4]). /* naming */ The syscall had various names throughout iterations of this patchset: - procfd_signal() - procfd_send_signal() - taskfd_send_signal() In the last round of reviews it was pointed out that given that if the flags argument decides the scope of the signal instead of different types of fds it might make sense to either settle for "procfd_" or "pidfd_" as prefix. The community was willing to accept either (cf. [17] and [18]). Given that one developer expressed strong preference for the "pidfd_" prefix (cf. [13]) and with other developers less opinionated about the name we should settle for "pidfd_" to avoid further bikeshedding. The "_send_signal" suffix was chosen to reflect the fact that the syscall takes on the job of multiple syscalls. It is therefore intentional that the name is not reminiscent of neither kill(2) nor rt_sigqueueinfo(2). Not the fomer because it might imply that pidfd_send_signal() is a replacement for kill(2), and not the latter because it is a hassle to remember the correct spelling - especially for non-native speakers - and because it is not descriptive enough of what the syscall actually does. The name "pidfd_send_signal" makes it very clear that its job is to send signals. /* zombies */ Zombies can be signaled just as any other process. No special error will be reported since a zombie state is an unreliable state (cf. [3]). However, this can be added as an extension through the @flags argument if the need ever arises. /* cross-namespace signals */ The patch currently enforces that the signaler and signalee either are in the same pid namespace or that the signaler's pid namespace is an ancestor of the signalee's pid namespace. This is done for the sake of simplicity and because it is unclear to what values certain members of struct siginfo_t would need to be set to (cf. [5], [6]). /* compat syscalls */ It became clear that we would like to avoid adding compat syscalls (cf. [7]). The compat syscall handling is now done in kernel/signal.c itself by adding __copy_siginfo_from_user_generic() which lets us avoid compat syscalls (cf. [8]). It should be noted that the addition of __copy_siginfo_from_user_any() is caused by a bug in the original implementation of rt_sigqueueinfo(2) (cf. 12). With upcoming rework for syscall handling things might improve significantly (cf. [11]) and __copy_siginfo_from_user_any() will not gain any additional callers. /* testing */ This patch was tested on x64 and x86. /* userspace usage */ An asciinema recording for the basic functionality can be found under [9]. With this patch a process can be killed via: #define _GNU_SOURCE #include <errno.h> #include <fcntl.h> #include <signal.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/stat.h> #include <sys/syscall.h> #include <sys/types.h> #include <unistd.h> static inline int do_pidfd_send_signal(int pidfd, int sig, siginfo_t *info, unsigned int flags) { #ifdef __NR_pidfd_send_signal return syscall(__NR_pidfd_send_signal, pidfd, sig, info, flags); #else return -ENOSYS; #endif } int main(int argc, char *argv[]) { int fd, ret, saved_errno, sig; if (argc < 3) exit(EXIT_FAILURE); fd = open(argv[1], O_DIRECTORY | O_CLOEXEC); if (fd < 0) { printf("%s - Failed to open \"%s\"\n", strerror(errno), argv[1]); exit(EXIT_FAILURE); } sig = atoi(argv[2]); printf("Sending signal %d to process %s\n", sig, argv[1]); ret = do_pidfd_send_signal(fd, sig, NULL, 0); saved_errno = errno; close(fd); errno = saved_errno; if (ret < 0) { printf("%s - Failed to send signal %d to process %s\n", strerror(errno), sig, argv[1]); exit(EXIT_FAILURE); } exit(EXIT_SUCCESS); } /* Q&A * Given that it seems the same questions get asked again by people who are * late to the party it makes sense to add a Q&A section to the commit * message so it's hopefully easier to avoid duplicate threads. * * For the sake of progress please consider these arguments settled unless * there is a new point that desperately needs to be addressed. Please make * sure to check the links to the threads in this commit message whether * this has not already been covered. */ Q-01: (Florian Weimer [20], Andrew Morton [21]) What happens when the target process has exited? A-01: Sending the signal will fail with ESRCH (cf. [22]). Q-02: (Andrew Morton [21]) Is the task_struct pinned by the fd? A-02: No. A reference to struct pid is kept. struct pid - as far as I understand - was created exactly for the reason to not require to pin struct task_struct (cf. [22]). Q-03: (Andrew Morton [21]) Does the entire procfs directory remain visible? Just one entry within it? A-03: The same thing that happens right now when you hold a file descriptor to /proc/<pid> open (cf. [22]). Q-04: (Andrew Morton [21]) Does the pid remain reserved? A-04: No. This patchset guarantees a stable handle not that pids are not recycled (cf. [22]). Q-05: (Andrew Morton [21]) Do attempts to signal that fd return errors? A-05: See {Q,A}-01. Q-06: (Andrew Morton [22]) Is there a cleaner way of obtaining the fd? Another syscall perhaps. A-06: Userspace can already trivially retrieve file descriptors from procfs so this is something that we will need to support anyway. Hence, there's no immediate need to add another syscalls just to make pidfd_send_signal() not dependent on the presence of procfs. However, adding a syscalls to get such file descriptors is planned for a future patchset (cf. [22]). Q-07: (Andrew Morton [21] and others) This fd-for-a-process sounds like a handy thing and people may well think up other uses for it in the future, probably unrelated to signals. Are the code and the interface designed to permit such future applications? A-07: Yes (cf. [22]). Q-08: (Andrew Morton [21] and others) Now I think about it, why a new syscall? This thing is looking rather like an ioctl? A-08: This has been extensively discussed. It was agreed that a syscall is preferred for a variety or reasons. Here are just a few taken from prior threads. Syscalls are safer than ioctl()s especially when signaling to fds. Processes are a core kernel concept so a syscall seems more appropriate. The layout of the syscall with its four arguments would require the addition of a custom struct for the ioctl() thereby causing at least the same amount or even more complexity for userspace than a simple syscall. The new syscall will replace multiple other pid-based syscalls (see description above). The file-descriptors-for-processes concept introduced with this syscall will be extended with other syscalls in the future. See also [22], [23] and various other threads already linked in here. Q-09: (Florian Weimer [24]) What happens if you use the new interface with an O_PATH descriptor? A-09: pidfds opened as O_PATH fds cannot be used to send signals to a process (cf. [2]). Signaling processes through pidfds is the equivalent of writing to a file. Thus, this is not an operation that operates "purely at the file descriptor level" as required by the open(2) manpage. See also [4]. /* References */ [1]: https://lore.kernel.org/lkml/20181029221037.87724-1-dancol@google.com/ [2]: https://lore.kernel.org/lkml/874lbtjvtd.fsf@oldenburg2.str.redhat.com/ [3]: https://lore.kernel.org/lkml/20181204132604.aspfupwjgjx6fhva@brauner.io/ [4]: https://lore.kernel.org/lkml/20181203180224.fkvw4kajtbvru2ku@brauner.io/ [5]: https://lore.kernel.org/lkml/20181121213946.GA10795@mail.hallyn.com/ [6]: https://lore.kernel.org/lkml/20181120103111.etlqp7zop34v6nv4@brauner.io/ [7]: https://lore.kernel.org/lkml/36323361-90BD-41AF-AB5B-EE0D7BA02C21@amacapital.net/ [8]: https://lore.kernel.org/lkml/87tvjxp8pc.fsf@xmission.com/ [9]: https://asciinema.org/a/IQjuCHew6bnq1cr78yuMv16cy [11]: https://lore.kernel.org/lkml/F53D6D38-3521-4C20-9034-5AF447DF62FF@amacapital.net/ [12]: https://lore.kernel.org/lkml/87zhtjn8ck.fsf@xmission.com/ [13]: https://lore.kernel.org/lkml/871s6u9z6u.fsf@xmission.com/ [14]: https://lore.kernel.org/lkml/20181206231742.xxi4ghn24z4h2qki@brauner.io/ [15]: https://lore.kernel.org/lkml/20181207003124.GA11160@mail.hallyn.com/ [16]: https://lore.kernel.org/lkml/20181207015423.4miorx43l3qhppfz@brauner.io/ [17]: https://lore.kernel.org/lkml/CAGXu5jL8PciZAXvOvCeCU3wKUEB_dU-O3q0tDw4uB_ojMvDEew@mail.gmail.com/ [18]: https://lore.kernel.org/lkml/20181206222746.GB9224@mail.hallyn.com/ [19]: https://lore.kernel.org/lkml/20181208054059.19813-1-christian@brauner.io/ [20]: https://lore.kernel.org/lkml/8736rebl9s.fsf@oldenburg.str.redhat.com/ [21]: https://lore.kernel.org/lkml/20181228152012.dbf0508c2508138efc5f2bbe@linux-foundation.org/ [22]: https://lore.kernel.org/lkml/20181228233725.722tdfgijxcssg76@brauner.io/ [23]: https://lwn.net/Articles/773459/ [24]: https://lore.kernel.org/lkml/8736rebl9s.fsf@oldenburg.str.redhat.com/ [25]: https://lore.kernel.org/lkml/CAK8P3a0ej9NcJM8wXNPbcGUyOUZYX+VLoDFdbenW3s3114oQZw@mail.gmail.com/ Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Jann Horn <jannh@google.com> Cc: Andy Lutomirsky <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Florian Weimer <fweimer@redhat.com> Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Tycho Andersen <tycho@tycho.ws> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Serge Hallyn <serge@hallyn.com> Acked-by: Aleksa Sarai <cyphar@cyphar.com>
2018-11-18 23:51:56 +00:00
if ((task_pid(current) != pid) &&
signal: don't silently convert SI_USER signals to non-current pidfd The current sys_pidfd_send_signal() silently turns signals with explicit SI_USER context that are sent to non-current tasks into signals with kernel-generated siginfo. This is unlike do_rt_sigqueueinfo(), which returns -EPERM in this case. If a user actually wants to send a signal with kernel-provided siginfo, they can do that with pidfd_send_signal(pidfd, sig, NULL, 0); so allowing this case is unnecessary. Instead of silently replacing the siginfo, just bail out with an error; this is consistent with other interfaces and avoids special-casing behavior based on security checks. Fixes: 3eb39f47934f ("signal: add pidfd_send_signal() syscall") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Christian Brauner <christian@brauner.io>
2019-03-30 02:12:32 +00:00
(kinfo.si_code >= 0 || kinfo.si_code == SI_TKILL))
goto err;
signal: add pidfd_send_signal() syscall The kill() syscall operates on process identifiers (pid). After a process has exited its pid can be reused by another process. If a caller sends a signal to a reused pid it will end up signaling the wrong process. This issue has often surfaced and there has been a push to address this problem [1]. This patch uses file descriptors (fd) from proc/<pid> as stable handles on struct pid. Even if a pid is recycled the handle will not change. The fd can be used to send signals to the process it refers to. Thus, the new syscall pidfd_send_signal() is introduced to solve this problem. Instead of pids it operates on process fds (pidfd). /* prototype and argument /* long pidfd_send_signal(int pidfd, int sig, siginfo_t *info, unsigned int flags); /* syscall number 424 */ The syscall number was chosen to be 424 to align with Arnd's rework in his y2038 to minimize merge conflicts (cf. [25]). In addition to the pidfd and signal argument it takes an additional siginfo_t and flags argument. If the siginfo_t argument is NULL then pidfd_send_signal() is equivalent to kill(<positive-pid>, <signal>). If it is not NULL pidfd_send_signal() is equivalent to rt_sigqueueinfo(). The flags argument is added to allow for future extensions of this syscall. It currently needs to be passed as 0. Failing to do so will cause EINVAL. /* pidfd_send_signal() replaces multiple pid-based syscalls */ The pidfd_send_signal() syscall currently takes on the job of rt_sigqueueinfo(2) and parts of the functionality of kill(2), Namely, when a positive pid is passed to kill(2). It will however be possible to also replace tgkill(2) and rt_tgsigqueueinfo(2) if this syscall is extended. /* sending signals to threads (tid) and process groups (pgid) */ Specifically, the pidfd_send_signal() syscall does currently not operate on process groups or threads. This is left for future extensions. In order to extend the syscall to allow sending signal to threads and process groups appropriately named flags (e.g. PIDFD_TYPE_PGID, and PIDFD_TYPE_TID) should be added. This implies that the flags argument will determine what is signaled and not the file descriptor itself. Put in other words, grouping in this api is a property of the flags argument not a property of the file descriptor (cf. [13]). Clarification for this has been requested by Eric (cf. [19]). When appropriate extensions through the flags argument are added then pidfd_send_signal() can additionally replace the part of kill(2) which operates on process groups as well as the tgkill(2) and rt_tgsigqueueinfo(2) syscalls. How such an extension could be implemented has been very roughly sketched in [14], [15], and [16]. However, this should not be taken as a commitment to a particular implementation. There might be better ways to do it. Right now this is intentionally left out to keep this patchset as simple as possible (cf. [4]). /* naming */ The syscall had various names throughout iterations of this patchset: - procfd_signal() - procfd_send_signal() - taskfd_send_signal() In the last round of reviews it was pointed out that given that if the flags argument decides the scope of the signal instead of different types of fds it might make sense to either settle for "procfd_" or "pidfd_" as prefix. The community was willing to accept either (cf. [17] and [18]). Given that one developer expressed strong preference for the "pidfd_" prefix (cf. [13]) and with other developers less opinionated about the name we should settle for "pidfd_" to avoid further bikeshedding. The "_send_signal" suffix was chosen to reflect the fact that the syscall takes on the job of multiple syscalls. It is therefore intentional that the name is not reminiscent of neither kill(2) nor rt_sigqueueinfo(2). Not the fomer because it might imply that pidfd_send_signal() is a replacement for kill(2), and not the latter because it is a hassle to remember the correct spelling - especially for non-native speakers - and because it is not descriptive enough of what the syscall actually does. The name "pidfd_send_signal" makes it very clear that its job is to send signals. /* zombies */ Zombies can be signaled just as any other process. No special error will be reported since a zombie state is an unreliable state (cf. [3]). However, this can be added as an extension through the @flags argument if the need ever arises. /* cross-namespace signals */ The patch currently enforces that the signaler and signalee either are in the same pid namespace or that the signaler's pid namespace is an ancestor of the signalee's pid namespace. This is done for the sake of simplicity and because it is unclear to what values certain members of struct siginfo_t would need to be set to (cf. [5], [6]). /* compat syscalls */ It became clear that we would like to avoid adding compat syscalls (cf. [7]). The compat syscall handling is now done in kernel/signal.c itself by adding __copy_siginfo_from_user_generic() which lets us avoid compat syscalls (cf. [8]). It should be noted that the addition of __copy_siginfo_from_user_any() is caused by a bug in the original implementation of rt_sigqueueinfo(2) (cf. 12). With upcoming rework for syscall handling things might improve significantly (cf. [11]) and __copy_siginfo_from_user_any() will not gain any additional callers. /* testing */ This patch was tested on x64 and x86. /* userspace usage */ An asciinema recording for the basic functionality can be found under [9]. With this patch a process can be killed via: #define _GNU_SOURCE #include <errno.h> #include <fcntl.h> #include <signal.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/stat.h> #include <sys/syscall.h> #include <sys/types.h> #include <unistd.h> static inline int do_pidfd_send_signal(int pidfd, int sig, siginfo_t *info, unsigned int flags) { #ifdef __NR_pidfd_send_signal return syscall(__NR_pidfd_send_signal, pidfd, sig, info, flags); #else return -ENOSYS; #endif } int main(int argc, char *argv[]) { int fd, ret, saved_errno, sig; if (argc < 3) exit(EXIT_FAILURE); fd = open(argv[1], O_DIRECTORY | O_CLOEXEC); if (fd < 0) { printf("%s - Failed to open \"%s\"\n", strerror(errno), argv[1]); exit(EXIT_FAILURE); } sig = atoi(argv[2]); printf("Sending signal %d to process %s\n", sig, argv[1]); ret = do_pidfd_send_signal(fd, sig, NULL, 0); saved_errno = errno; close(fd); errno = saved_errno; if (ret < 0) { printf("%s - Failed to send signal %d to process %s\n", strerror(errno), sig, argv[1]); exit(EXIT_FAILURE); } exit(EXIT_SUCCESS); } /* Q&A * Given that it seems the same questions get asked again by people who are * late to the party it makes sense to add a Q&A section to the commit * message so it's hopefully easier to avoid duplicate threads. * * For the sake of progress please consider these arguments settled unless * there is a new point that desperately needs to be addressed. Please make * sure to check the links to the threads in this commit message whether * this has not already been covered. */ Q-01: (Florian Weimer [20], Andrew Morton [21]) What happens when the target process has exited? A-01: Sending the signal will fail with ESRCH (cf. [22]). Q-02: (Andrew Morton [21]) Is the task_struct pinned by the fd? A-02: No. A reference to struct pid is kept. struct pid - as far as I understand - was created exactly for the reason to not require to pin struct task_struct (cf. [22]). Q-03: (Andrew Morton [21]) Does the entire procfs directory remain visible? Just one entry within it? A-03: The same thing that happens right now when you hold a file descriptor to /proc/<pid> open (cf. [22]). Q-04: (Andrew Morton [21]) Does the pid remain reserved? A-04: No. This patchset guarantees a stable handle not that pids are not recycled (cf. [22]). Q-05: (Andrew Morton [21]) Do attempts to signal that fd return errors? A-05: See {Q,A}-01. Q-06: (Andrew Morton [22]) Is there a cleaner way of obtaining the fd? Another syscall perhaps. A-06: Userspace can already trivially retrieve file descriptors from procfs so this is something that we will need to support anyway. Hence, there's no immediate need to add another syscalls just to make pidfd_send_signal() not dependent on the presence of procfs. However, adding a syscalls to get such file descriptors is planned for a future patchset (cf. [22]). Q-07: (Andrew Morton [21] and others) This fd-for-a-process sounds like a handy thing and people may well think up other uses for it in the future, probably unrelated to signals. Are the code and the interface designed to permit such future applications? A-07: Yes (cf. [22]). Q-08: (Andrew Morton [21] and others) Now I think about it, why a new syscall? This thing is looking rather like an ioctl? A-08: This has been extensively discussed. It was agreed that a syscall is preferred for a variety or reasons. Here are just a few taken from prior threads. Syscalls are safer than ioctl()s especially when signaling to fds. Processes are a core kernel concept so a syscall seems more appropriate. The layout of the syscall with its four arguments would require the addition of a custom struct for the ioctl() thereby causing at least the same amount or even more complexity for userspace than a simple syscall. The new syscall will replace multiple other pid-based syscalls (see description above). The file-descriptors-for-processes concept introduced with this syscall will be extended with other syscalls in the future. See also [22], [23] and various other threads already linked in here. Q-09: (Florian Weimer [24]) What happens if you use the new interface with an O_PATH descriptor? A-09: pidfds opened as O_PATH fds cannot be used to send signals to a process (cf. [2]). Signaling processes through pidfds is the equivalent of writing to a file. Thus, this is not an operation that operates "purely at the file descriptor level" as required by the open(2) manpage. See also [4]. /* References */ [1]: https://lore.kernel.org/lkml/20181029221037.87724-1-dancol@google.com/ [2]: https://lore.kernel.org/lkml/874lbtjvtd.fsf@oldenburg2.str.redhat.com/ [3]: https://lore.kernel.org/lkml/20181204132604.aspfupwjgjx6fhva@brauner.io/ [4]: https://lore.kernel.org/lkml/20181203180224.fkvw4kajtbvru2ku@brauner.io/ [5]: https://lore.kernel.org/lkml/20181121213946.GA10795@mail.hallyn.com/ [6]: https://lore.kernel.org/lkml/20181120103111.etlqp7zop34v6nv4@brauner.io/ [7]: https://lore.kernel.org/lkml/36323361-90BD-41AF-AB5B-EE0D7BA02C21@amacapital.net/ [8]: https://lore.kernel.org/lkml/87tvjxp8pc.fsf@xmission.com/ [9]: https://asciinema.org/a/IQjuCHew6bnq1cr78yuMv16cy [11]: https://lore.kernel.org/lkml/F53D6D38-3521-4C20-9034-5AF447DF62FF@amacapital.net/ [12]: https://lore.kernel.org/lkml/87zhtjn8ck.fsf@xmission.com/ [13]: https://lore.kernel.org/lkml/871s6u9z6u.fsf@xmission.com/ [14]: https://lore.kernel.org/lkml/20181206231742.xxi4ghn24z4h2qki@brauner.io/ [15]: https://lore.kernel.org/lkml/20181207003124.GA11160@mail.hallyn.com/ [16]: https://lore.kernel.org/lkml/20181207015423.4miorx43l3qhppfz@brauner.io/ [17]: https://lore.kernel.org/lkml/CAGXu5jL8PciZAXvOvCeCU3wKUEB_dU-O3q0tDw4uB_ojMvDEew@mail.gmail.com/ [18]: https://lore.kernel.org/lkml/20181206222746.GB9224@mail.hallyn.com/ [19]: https://lore.kernel.org/lkml/20181208054059.19813-1-christian@brauner.io/ [20]: https://lore.kernel.org/lkml/8736rebl9s.fsf@oldenburg.str.redhat.com/ [21]: https://lore.kernel.org/lkml/20181228152012.dbf0508c2508138efc5f2bbe@linux-foundation.org/ [22]: https://lore.kernel.org/lkml/20181228233725.722tdfgijxcssg76@brauner.io/ [23]: https://lwn.net/Articles/773459/ [24]: https://lore.kernel.org/lkml/8736rebl9s.fsf@oldenburg.str.redhat.com/ [25]: https://lore.kernel.org/lkml/CAK8P3a0ej9NcJM8wXNPbcGUyOUZYX+VLoDFdbenW3s3114oQZw@mail.gmail.com/ Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Jann Horn <jannh@google.com> Cc: Andy Lutomirsky <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Florian Weimer <fweimer@redhat.com> Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Tycho Andersen <tycho@tycho.ws> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Serge Hallyn <serge@hallyn.com> Acked-by: Aleksa Sarai <cyphar@cyphar.com>
2018-11-18 23:51:56 +00:00
} else {
prepare_kill_siginfo(sig, &kinfo);
}
ret = kill_pid_info(sig, &kinfo, pid);
err:
fdput(f);
return ret;
}
signals: split do_tkill Split out the code from do_tkill to make it reusable by the follow up patch which implements sys_rt_tgsigqueueinfo Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Oleg Nesterov <oleg@redhat.com>
2009-04-04 21:01:01 +00:00
static int
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
do_send_specific(pid_t tgid, pid_t pid, int sig, struct kernel_siginfo *info)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct task_struct *p;
signals: split do_tkill Split out the code from do_tkill to make it reusable by the follow up patch which implements sys_rt_tgsigqueueinfo Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Oleg Nesterov <oleg@redhat.com>
2009-04-04 21:01:01 +00:00
int error = -ESRCH;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
signals: do_tkill: don't use tasklist_lock Convert do_tkill() to use rcu_read_lock() + lock_task_sighand() to avoid taking tasklist lock. Note that we don't return an error if lock_task_sighand() fails, we pretend the task dies after receiving the signal. Otherwise, we should fight with the nasty races with mt-exec without having any advantage. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:51 +00:00
rcu_read_lock();
Uninline find_task_by_xxx set of functions The find_task_by_something is a set of macros are used to find task by pid depending on what kind of pid is proposed - global or virtual one. All of them are wrappers above the most generic one - find_task_by_pid_type_ns() - and just substitute some args for it. It turned out, that dereferencing the current->nsproxy->pid_ns construction and pushing one more argument on the stack inline cause kernel text size to grow. This patch moves all this stuff out-of-line into kernel/pid.c. Together with the next patch it saves a bit less than 400 bytes from the .text section. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 06:40:16 +00:00
p = find_task_by_vpid(pid);
pid namespaces: changes to show virtual ids to user This is the largest patch in the set. Make all (I hope) the places where the pid is shown to or get from user operate on the virtual pids. The idea is: - all in-kernel data structures must store either struct pid itself or the pid's global nr, obtained with pid_nr() call; - when seeking the task from kernel code with the stored id one should use find_task_by_pid() call that works with global pids; - when showing pid's numerical value to the user the virtual one should be used, but however when one shows task's pid outside this task's namespace the global one is to be used; - when getting the pid from userspace one need to consider this as the virtual one and use appropriate task/pid-searching functions. [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: nuther build fix] [akpm@linux-foundation.org: yet nuther build fix] [akpm@linux-foundation.org: remove unneeded casts] Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 06:40:14 +00:00
if (p && (tgid <= 0 || task_tgid_vnr(p) == tgid)) {
signals: split do_tkill Split out the code from do_tkill to make it reusable by the follow up patch which implements sys_rt_tgsigqueueinfo Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Oleg Nesterov <oleg@redhat.com>
2009-04-04 21:01:01 +00:00
error = check_kill_permission(sig, info, p);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* The null signal is a permissions and process existence
* probe. No signal is actually delivered.
*/
signals: introduce do_send_sig_info() helper Introduce do_send_sig_info() and convert group_send_sig_info(), send_sig_info(), do_send_specific() to use this helper. Hopefully it will have more users soon, it allows to specify specific/group behaviour via "bool group" argument. Shaves 80 bytes from .text. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: stephane eranian <eranian@googlemail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 22:57:00 +00:00
if (!error && sig) {
signal: Pass pid type into do_send_sig_info This passes the information we already have at the call sight into do_send_sig_info. Ultimately allowing for better handling of signals sent to a group of processes during fork. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-07-21 15:45:15 +00:00
error = do_send_sig_info(sig, info, p, PIDTYPE_PID);
signals: introduce do_send_sig_info() helper Introduce do_send_sig_info() and convert group_send_sig_info(), send_sig_info(), do_send_specific() to use this helper. Hopefully it will have more users soon, it allows to specify specific/group behaviour via "bool group" argument. Shaves 80 bytes from .text. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: stephane eranian <eranian@googlemail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 22:57:00 +00:00
/*
* If lock_task_sighand() failed we pretend the task
* dies after receiving the signal. The window is tiny,
* and the signal is private anyway.
*/
if (unlikely(error == -ESRCH))
error = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
}
signals: do_tkill: don't use tasklist_lock Convert do_tkill() to use rcu_read_lock() + lock_task_sighand() to avoid taking tasklist lock. Note that we don't return an error if lock_task_sighand() fails, we pretend the task dies after receiving the signal. Otherwise, we should fight with the nasty races with mt-exec without having any advantage. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 07:52:51 +00:00
rcu_read_unlock();
[PATCH] Unify sys_tkill() and sys_tgkill() The majority of the sys_tkill() and sys_tgkill() function code is duplicated between the two of them. This patch pulls the duplication out into a separate function -- do_tkill() -- and lets sys_tkill() and sys_tgkill() be simple wrappers around it. This should make it easier to maintain in light of future changes. Signed-off-by: Vadim Lobanov <vlobanov@speakeasy.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 23:02:18 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return error;
}
signals: split do_tkill Split out the code from do_tkill to make it reusable by the follow up patch which implements sys_rt_tgsigqueueinfo Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Oleg Nesterov <oleg@redhat.com>
2009-04-04 21:01:01 +00:00
static int do_tkill(pid_t tgid, pid_t pid, int sig)
{
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
struct kernel_siginfo info;
signals: split do_tkill Split out the code from do_tkill to make it reusable by the follow up patch which implements sys_rt_tgsigqueueinfo Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Oleg Nesterov <oleg@redhat.com>
2009-04-04 21:01:01 +00:00
signal: Don't use structure initializers for struct siginfo The siginfo structure has all manners of holes with the result that a structure initializer is not guaranteed to initialize all of the bits. As we have to copy the structure to userspace don't even try to use a structure initializer. Instead use clear_siginfo followed by initializing selected fields. This gives a guarantee that uninitialized kernel memory is not copied to userspace. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-22 20:58:57 +00:00
clear_siginfo(&info);
signals: split do_tkill Split out the code from do_tkill to make it reusable by the follow up patch which implements sys_rt_tgsigqueueinfo Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Oleg Nesterov <oleg@redhat.com>
2009-04-04 21:01:01 +00:00
info.si_signo = sig;
info.si_errno = 0;
info.si_code = SI_TKILL;
info.si_pid = task_tgid_vnr(current);
userns: Store uid and gid values in struct cred with kuid_t and kgid_t types cred.h and a few trivial users of struct cred are changed. The rest of the users of struct cred are left for other patches as there are too many changes to make in one go and leave the change reviewable. If the user namespace is disabled and CONFIG_UIDGID_STRICT_TYPE_CHECKS are disabled the code will contiue to compile and behave correctly. Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-02-08 15:00:08 +00:00
info.si_uid = from_kuid_munged(current_user_ns(), current_uid());
signals: split do_tkill Split out the code from do_tkill to make it reusable by the follow up patch which implements sys_rt_tgsigqueueinfo Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Oleg Nesterov <oleg@redhat.com>
2009-04-04 21:01:01 +00:00
return do_send_specific(tgid, pid, sig, &info);
}
[PATCH] Unify sys_tkill() and sys_tgkill() The majority of the sys_tkill() and sys_tgkill() function code is duplicated between the two of them. This patch pulls the duplication out into a separate function -- do_tkill() -- and lets sys_tkill() and sys_tgkill() be simple wrappers around it. This should make it easier to maintain in light of future changes. Signed-off-by: Vadim Lobanov <vlobanov@speakeasy.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 23:02:18 +00:00
/**
* sys_tgkill - send signal to one specific thread
* @tgid: the thread group ID of the thread
* @pid: the PID of the thread
* @sig: signal to be sent
*
[PATCH] Numerous fixes to kernel-doc info in source files. A variety of (mostly) innocuous fixes to the embedded kernel-doc content in source files, including: * make multi-line initial descriptions single line * denote some function names, constants and structs as such * change erroneous opening '/*' to '/**' in a few places * reword some text for clarity Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-10 09:45:59 +00:00
* This syscall also checks the @tgid and returns -ESRCH even if the PID
[PATCH] Unify sys_tkill() and sys_tgkill() The majority of the sys_tkill() and sys_tgkill() function code is duplicated between the two of them. This patch pulls the duplication out into a separate function -- do_tkill() -- and lets sys_tkill() and sys_tgkill() be simple wrappers around it. This should make it easier to maintain in light of future changes. Signed-off-by: Vadim Lobanov <vlobanov@speakeasy.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 23:02:18 +00:00
* exists but it's not belonging to the target process anymore. This
* method solves the problem of threads exiting and PIDs getting reused.
*/
[CVE-2009-0029] System call wrappers part 09 Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 13:14:11 +00:00
SYSCALL_DEFINE3(tgkill, pid_t, tgid, pid_t, pid, int, sig)
[PATCH] Unify sys_tkill() and sys_tgkill() The majority of the sys_tkill() and sys_tgkill() function code is duplicated between the two of them. This patch pulls the duplication out into a separate function -- do_tkill() -- and lets sys_tkill() and sys_tgkill() be simple wrappers around it. This should make it easier to maintain in light of future changes. Signed-off-by: Vadim Lobanov <vlobanov@speakeasy.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 23:02:18 +00:00
{
/* This is only valid for single tasks */
if (pid <= 0 || tgid <= 0)
return -EINVAL;
return do_tkill(tgid, pid, sig);
}
kernel/signal.c: add kernel-doc notation to syscalls Add kernel-doc to syscalls in signal.c. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-04 22:00:26 +00:00
/**
* sys_tkill - send signal to one specific task
* @pid: the PID of the task
* @sig: signal to be sent
*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
* Send a signal to only one task, even if it's a CLONE_THREAD task.
*/
[CVE-2009-0029] System call wrappers part 09 Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 13:14:11 +00:00
SYSCALL_DEFINE2(tkill, pid_t, pid, int, sig)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
/* This is only valid for single tasks */
if (pid <= 0)
return -EINVAL;
[PATCH] Unify sys_tkill() and sys_tgkill() The majority of the sys_tkill() and sys_tgkill() function code is duplicated between the two of them. This patch pulls the duplication out into a separate function -- do_tkill() -- and lets sys_tkill() and sys_tgkill() be simple wrappers around it. This should make it easier to maintain in light of future changes. Signed-off-by: Vadim Lobanov <vlobanov@speakeasy.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 23:02:18 +00:00
return do_tkill(0, pid, sig);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
static int do_rt_sigqueueinfo(pid_t pid, int sig, kernel_siginfo_t *info)
generic compat_sys_rt_sigqueueinfo() conditional on GENERIC_COMPAT_RT_SIGQUEUEINFO; by the end of that series it will become the same thing as COMPAT and conditional will die out. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-25 20:19:12 +00:00
{
/* Not even root can pretend to send signals from the kernel.
* Nor can they impersonate a kill()/tgkill(), which adds source info.
*/
signal: allow to send any siginfo to itself The idea is simple. We need to get the siginfo for each signal on checkpointing dump, and then return it back on restore. The first problem is that the kernel doesn't report complete siginfos to userspace. In a signal handler the kernel strips SI_CODE from siginfo. When a siginfo is received from signalfd, it has a different format with fixed sizes of fields. The interface of signalfd was extended. If a signalfd is created with the flag SFD_RAW, it returns siginfo in a raw format. rt_sigqueueinfo looks suitable for restoring signals, but it can't send siginfo with a positive si_code, because these codes are reserved for the kernel. In the real world each person has right to do anything with himself, so I think a process should able to send any siginfo to itself. This patch: The kernel prevents sending of siginfo with positive si_code, because these codes are reserved for kernel. I think we can allow a task to send such a siginfo to itself. This operation should not be dangerous. This functionality is required for restoring signals in checkpoint/restart. Signed-off-by: Andrey Vagin <avagin@openvz.org> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28 01:03:12 +00:00
if ((info->si_code >= 0 || info->si_code == SI_TKILL) &&
signal: remove warning about using SI_TKILL in rt_[tg]sigqueueinfo Sending SI_TKILL from rt_[tg]sigqueueinfo was deprecated, so now we issue a warning on the first attempt of doing it. We use WARN_ON_ONCE, which is not informative and, what is worse, taints the kernel, making the trinity syscall fuzzer complain false-positively from time to time. It does not look like we need this warning at all, because the behaviour changed quite a long time ago (2.6.39), and if an application relies on the old API, it gets EPERM anyway and can issue a warning by itself. So let us zap the warning in kernel. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Richard Weinberger <richard@nod.at> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-16 19:47:35 +00:00
(task_pid_vnr(current) != pid))
generic compat_sys_rt_sigqueueinfo() conditional on GENERIC_COMPAT_RT_SIGQUEUEINFO; by the end of that series it will become the same thing as COMPAT and conditional will die out. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-25 20:19:12 +00:00
return -EPERM;
signal: remove warning about using SI_TKILL in rt_[tg]sigqueueinfo Sending SI_TKILL from rt_[tg]sigqueueinfo was deprecated, so now we issue a warning on the first attempt of doing it. We use WARN_ON_ONCE, which is not informative and, what is worse, taints the kernel, making the trinity syscall fuzzer complain false-positively from time to time. It does not look like we need this warning at all, because the behaviour changed quite a long time ago (2.6.39), and if an application relies on the old API, it gets EPERM anyway and can issue a warning by itself. So let us zap the warning in kernel. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Richard Weinberger <richard@nod.at> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-16 19:47:35 +00:00
generic compat_sys_rt_sigqueueinfo() conditional on GENERIC_COMPAT_RT_SIGQUEUEINFO; by the end of that series it will become the same thing as COMPAT and conditional will die out. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-25 20:19:12 +00:00
/* POSIX.1b doesn't mention process groups. */
return kill_proc_info(sig, info, pid);
}
kernel/signal.c: add kernel-doc notation to syscalls Add kernel-doc to syscalls in signal.c. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-04 22:00:26 +00:00
/**
* sys_rt_sigqueueinfo - send signal information to a signal
* @pid: the PID of the thread
* @sig: signal to be sent
* @uinfo: signal info to be sent
*/
[CVE-2009-0029] System call wrappers part 09 Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 13:14:11 +00:00
SYSCALL_DEFINE3(rt_sigqueueinfo, pid_t, pid, int, sig,
siginfo_t __user *, uinfo)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
kernel_siginfo_t info;
signal: In sigqueueinfo prefer sig not si_signo Andrei Vagin <avagin@gmail.com> reported: > Accoding to the man page, the user should not set si_signo, it has to be set > by kernel. > > $ man 2 rt_sigqueueinfo > > The uinfo argument specifies the data to accompany the signal. This > argument is a pointer to a structure of type siginfo_t, described in > sigaction(2) (and defined by including <sigaction.h>). The caller > should set the following fields in this structure: > > si_code > This must be one of the SI_* codes in the Linux kernel source > file include/asm-generic/siginfo.h, with the restriction that > the code must be negative (i.e., cannot be SI_USER, which is > used by the kernel to indicate a signal sent by kill(2)) and > cannot (since Linux 2.6.39) be SI_TKILL (which is used by the > kernel to indicate a signal sent using tgkill(2)). > > si_pid This should be set to a process ID, typically the process ID of > the sender. > > si_uid This should be set to a user ID, typically the real user ID of > the sender. > > si_value > This field contains the user data to accompany the signal. For > more information, see the description of the last (union sigval) > argument of sigqueue(3). > > Internally, the kernel sets the si_signo field to the value specified > in sig, so that the receiver of the signal can also obtain the signal > number via that field. > > On Tue, Sep 25, 2018 at 07:19:02PM +0200, Eric W. Biederman wrote: >> >> If there is some application that calls sigqueueinfo directly that has >> a problem with this added sanity check we can revisit this when we see >> what kind of crazy that application is doing. > > > I already know two "applications" ;) > > https://github.com/torvalds/linux/blob/master/tools/testing/selftests/ptrace/peeksiginfo.c > https://github.com/checkpoint-restore/criu/blob/master/test/zdtm/static/sigpending.c > > Disclaimer: I'm the author of both of them. Looking at the kernel code the historical behavior has alwasy been to prefer the signal number passed in by the kernel. So sigh. Implmenet __copy_siginfo_from_user and __copy_siginfo_from_user32 to take that signal number and prefer it. The user of ptrace will still use copy_siginfo_from_user and copy_siginfo_from_user32 as they do not and never have had a signal number there. Luckily this change has never made it farther than linux-next. Fixes: e75dc036c445 ("signal: Fail sigqueueinfo if si_signo != sig") Reported-by: Andrei Vagin <avagin@gmail.com> Tested-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-10-05 07:02:48 +00:00
int ret = __copy_siginfo_from_user(sig, &info, uinfo);
signal: Introduce copy_siginfo_from_user and use it's return value In preparation for using a smaller version of siginfo in the kernel introduce copy_siginfo_from_user and use it when siginfo is copied from userspace. Make the pattern for using copy_siginfo_from_user and copy_siginfo_from_user32 to capture the return value and return that value on error. This is a necessary prerequisite for using a smaller siginfo in the kernel than the kernel exports to userspace. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-04-18 22:30:19 +00:00
if (unlikely(ret))
return ret;
generic compat_sys_rt_sigqueueinfo() conditional on GENERIC_COMPAT_RT_SIGQUEUEINFO; by the end of that series it will become the same thing as COMPAT and conditional will die out. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-25 20:19:12 +00:00
return do_rt_sigqueueinfo(pid, sig, &info);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
generic compat_sys_rt_sigqueueinfo() conditional on GENERIC_COMPAT_RT_SIGQUEUEINFO; by the end of that series it will become the same thing as COMPAT and conditional will die out. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-25 20:19:12 +00:00
#ifdef CONFIG_COMPAT
COMPAT_SYSCALL_DEFINE3(rt_sigqueueinfo,
compat_pid_t, pid,
int, sig,
struct compat_siginfo __user *, uinfo)
{
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
kernel_siginfo_t info;
signal: In sigqueueinfo prefer sig not si_signo Andrei Vagin <avagin@gmail.com> reported: > Accoding to the man page, the user should not set si_signo, it has to be set > by kernel. > > $ man 2 rt_sigqueueinfo > > The uinfo argument specifies the data to accompany the signal. This > argument is a pointer to a structure of type siginfo_t, described in > sigaction(2) (and defined by including <sigaction.h>). The caller > should set the following fields in this structure: > > si_code > This must be one of the SI_* codes in the Linux kernel source > file include/asm-generic/siginfo.h, with the restriction that > the code must be negative (i.e., cannot be SI_USER, which is > used by the kernel to indicate a signal sent by kill(2)) and > cannot (since Linux 2.6.39) be SI_TKILL (which is used by the > kernel to indicate a signal sent using tgkill(2)). > > si_pid This should be set to a process ID, typically the process ID of > the sender. > > si_uid This should be set to a user ID, typically the real user ID of > the sender. > > si_value > This field contains the user data to accompany the signal. For > more information, see the description of the last (union sigval) > argument of sigqueue(3). > > Internally, the kernel sets the si_signo field to the value specified > in sig, so that the receiver of the signal can also obtain the signal > number via that field. > > On Tue, Sep 25, 2018 at 07:19:02PM +0200, Eric W. Biederman wrote: >> >> If there is some application that calls sigqueueinfo directly that has >> a problem with this added sanity check we can revisit this when we see >> what kind of crazy that application is doing. > > > I already know two "applications" ;) > > https://github.com/torvalds/linux/blob/master/tools/testing/selftests/ptrace/peeksiginfo.c > https://github.com/checkpoint-restore/criu/blob/master/test/zdtm/static/sigpending.c > > Disclaimer: I'm the author of both of them. Looking at the kernel code the historical behavior has alwasy been to prefer the signal number passed in by the kernel. So sigh. Implmenet __copy_siginfo_from_user and __copy_siginfo_from_user32 to take that signal number and prefer it. The user of ptrace will still use copy_siginfo_from_user and copy_siginfo_from_user32 as they do not and never have had a signal number there. Luckily this change has never made it farther than linux-next. Fixes: e75dc036c445 ("signal: Fail sigqueueinfo if si_signo != sig") Reported-by: Andrei Vagin <avagin@gmail.com> Tested-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-10-05 07:02:48 +00:00
int ret = __copy_siginfo_from_user32(sig, &info, uinfo);
generic compat_sys_rt_sigqueueinfo() conditional on GENERIC_COMPAT_RT_SIGQUEUEINFO; by the end of that series it will become the same thing as COMPAT and conditional will die out. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-25 20:19:12 +00:00
if (unlikely(ret))
return ret;
return do_rt_sigqueueinfo(pid, sig, &info);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
generic compat_sys_rt_sigqueueinfo() conditional on GENERIC_COMPAT_RT_SIGQUEUEINFO; by the end of that series it will become the same thing as COMPAT and conditional will die out. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-25 20:19:12 +00:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
static int do_rt_tgsigqueueinfo(pid_t tgid, pid_t pid, int sig, kernel_siginfo_t *info)
signals: implement sys_rt_tgsigqueueinfo sys_kill has the per thread counterpart sys_tgkill. sigqueueinfo is missing a thread directed counterpart. Such an interface is important for migrating applications from other OSes which have the per thread delivery implemented. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Roland McGrath <roland@redhat.com> Acked-by: Ulrich Drepper <drepper@redhat.com>
2009-04-04 21:01:06 +00:00
{
/* This is only valid for single tasks */
if (pid <= 0 || tgid <= 0)
return -EINVAL;
/* Not even root can pretend to send signals from the kernel.
Prevent rt_sigqueueinfo and rt_tgsigqueueinfo from spoofing the signal code Userland should be able to trust the pid and uid of the sender of a signal if the si_code is SI_TKILL. Unfortunately, the kernel has historically allowed sigqueueinfo() to send any si_code at all (as long as it was negative - to distinguish it from kernel-generated signals like SIGILL etc), so it could spoof a SI_TKILL with incorrect siginfo values. Happily, it looks like glibc has always set si_code to the appropriate SI_QUEUE, so there are probably no actual user code that ever uses anything but the appropriate SI_QUEUE flag. So just tighten the check for si_code (we used to allow any negative value), and add a (one-time) warning in case there are binaries out there that might depend on using other si_code values. Signed-off-by: Julien Tinnes <jln@google.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-18 22:05:21 +00:00
* Nor can they impersonate a kill()/tgkill(), which adds source info.
*/
signal: remove warning about using SI_TKILL in rt_[tg]sigqueueinfo Sending SI_TKILL from rt_[tg]sigqueueinfo was deprecated, so now we issue a warning on the first attempt of doing it. We use WARN_ON_ONCE, which is not informative and, what is worse, taints the kernel, making the trinity syscall fuzzer complain false-positively from time to time. It does not look like we need this warning at all, because the behaviour changed quite a long time ago (2.6.39), and if an application relies on the old API, it gets EPERM anyway and can issue a warning by itself. So let us zap the warning in kernel. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Richard Weinberger <richard@nod.at> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-16 19:47:35 +00:00
if ((info->si_code >= 0 || info->si_code == SI_TKILL) &&
(task_pid_vnr(current) != pid))
signals: implement sys_rt_tgsigqueueinfo sys_kill has the per thread counterpart sys_tgkill. sigqueueinfo is missing a thread directed counterpart. Such an interface is important for migrating applications from other OSes which have the per thread delivery implemented. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Roland McGrath <roland@redhat.com> Acked-by: Ulrich Drepper <drepper@redhat.com>
2009-04-04 21:01:06 +00:00
return -EPERM;
signal: remove warning about using SI_TKILL in rt_[tg]sigqueueinfo Sending SI_TKILL from rt_[tg]sigqueueinfo was deprecated, so now we issue a warning on the first attempt of doing it. We use WARN_ON_ONCE, which is not informative and, what is worse, taints the kernel, making the trinity syscall fuzzer complain false-positively from time to time. It does not look like we need this warning at all, because the behaviour changed quite a long time ago (2.6.39), and if an application relies on the old API, it gets EPERM anyway and can issue a warning by itself. So let us zap the warning in kernel. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Richard Weinberger <richard@nod.at> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-16 19:47:35 +00:00
signals: implement sys_rt_tgsigqueueinfo sys_kill has the per thread counterpart sys_tgkill. sigqueueinfo is missing a thread directed counterpart. Such an interface is important for migrating applications from other OSes which have the per thread delivery implemented. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Roland McGrath <roland@redhat.com> Acked-by: Ulrich Drepper <drepper@redhat.com>
2009-04-04 21:01:06 +00:00
return do_send_specific(tgid, pid, sig, info);
}
SYSCALL_DEFINE4(rt_tgsigqueueinfo, pid_t, tgid, pid_t, pid, int, sig,
siginfo_t __user *, uinfo)
{
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
kernel_siginfo_t info;
signal: In sigqueueinfo prefer sig not si_signo Andrei Vagin <avagin@gmail.com> reported: > Accoding to the man page, the user should not set si_signo, it has to be set > by kernel. > > $ man 2 rt_sigqueueinfo > > The uinfo argument specifies the data to accompany the signal. This > argument is a pointer to a structure of type siginfo_t, described in > sigaction(2) (and defined by including <sigaction.h>). The caller > should set the following fields in this structure: > > si_code > This must be one of the SI_* codes in the Linux kernel source > file include/asm-generic/siginfo.h, with the restriction that > the code must be negative (i.e., cannot be SI_USER, which is > used by the kernel to indicate a signal sent by kill(2)) and > cannot (since Linux 2.6.39) be SI_TKILL (which is used by the > kernel to indicate a signal sent using tgkill(2)). > > si_pid This should be set to a process ID, typically the process ID of > the sender. > > si_uid This should be set to a user ID, typically the real user ID of > the sender. > > si_value > This field contains the user data to accompany the signal. For > more information, see the description of the last (union sigval) > argument of sigqueue(3). > > Internally, the kernel sets the si_signo field to the value specified > in sig, so that the receiver of the signal can also obtain the signal > number via that field. > > On Tue, Sep 25, 2018 at 07:19:02PM +0200, Eric W. Biederman wrote: >> >> If there is some application that calls sigqueueinfo directly that has >> a problem with this added sanity check we can revisit this when we see >> what kind of crazy that application is doing. > > > I already know two "applications" ;) > > https://github.com/torvalds/linux/blob/master/tools/testing/selftests/ptrace/peeksiginfo.c > https://github.com/checkpoint-restore/criu/blob/master/test/zdtm/static/sigpending.c > > Disclaimer: I'm the author of both of them. Looking at the kernel code the historical behavior has alwasy been to prefer the signal number passed in by the kernel. So sigh. Implmenet __copy_siginfo_from_user and __copy_siginfo_from_user32 to take that signal number and prefer it. The user of ptrace will still use copy_siginfo_from_user and copy_siginfo_from_user32 as they do not and never have had a signal number there. Luckily this change has never made it farther than linux-next. Fixes: e75dc036c445 ("signal: Fail sigqueueinfo if si_signo != sig") Reported-by: Andrei Vagin <avagin@gmail.com> Tested-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-10-05 07:02:48 +00:00
int ret = __copy_siginfo_from_user(sig, &info, uinfo);
signal: Introduce copy_siginfo_from_user and use it's return value In preparation for using a smaller version of siginfo in the kernel introduce copy_siginfo_from_user and use it when siginfo is copied from userspace. Make the pattern for using copy_siginfo_from_user and copy_siginfo_from_user32 to capture the return value and return that value on error. This is a necessary prerequisite for using a smaller siginfo in the kernel than the kernel exports to userspace. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-04-18 22:30:19 +00:00
if (unlikely(ret))
return ret;
signals: implement sys_rt_tgsigqueueinfo sys_kill has the per thread counterpart sys_tgkill. sigqueueinfo is missing a thread directed counterpart. Such an interface is important for migrating applications from other OSes which have the per thread delivery implemented. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Roland McGrath <roland@redhat.com> Acked-by: Ulrich Drepper <drepper@redhat.com>
2009-04-04 21:01:06 +00:00
return do_rt_tgsigqueueinfo(tgid, pid, sig, &info);
}
switch rt_tgsigqueueinfo to COMPAT_SYSCALL_DEFINE C ABI violations on sparc, ppc and mips Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-25 04:12:04 +00:00
#ifdef CONFIG_COMPAT
COMPAT_SYSCALL_DEFINE4(rt_tgsigqueueinfo,
compat_pid_t, tgid,
compat_pid_t, pid,
int, sig,
struct compat_siginfo __user *, uinfo)
{
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
kernel_siginfo_t info;
signal: In sigqueueinfo prefer sig not si_signo Andrei Vagin <avagin@gmail.com> reported: > Accoding to the man page, the user should not set si_signo, it has to be set > by kernel. > > $ man 2 rt_sigqueueinfo > > The uinfo argument specifies the data to accompany the signal. This > argument is a pointer to a structure of type siginfo_t, described in > sigaction(2) (and defined by including <sigaction.h>). The caller > should set the following fields in this structure: > > si_code > This must be one of the SI_* codes in the Linux kernel source > file include/asm-generic/siginfo.h, with the restriction that > the code must be negative (i.e., cannot be SI_USER, which is > used by the kernel to indicate a signal sent by kill(2)) and > cannot (since Linux 2.6.39) be SI_TKILL (which is used by the > kernel to indicate a signal sent using tgkill(2)). > > si_pid This should be set to a process ID, typically the process ID of > the sender. > > si_uid This should be set to a user ID, typically the real user ID of > the sender. > > si_value > This field contains the user data to accompany the signal. For > more information, see the description of the last (union sigval) > argument of sigqueue(3). > > Internally, the kernel sets the si_signo field to the value specified > in sig, so that the receiver of the signal can also obtain the signal > number via that field. > > On Tue, Sep 25, 2018 at 07:19:02PM +0200, Eric W. Biederman wrote: >> >> If there is some application that calls sigqueueinfo directly that has >> a problem with this added sanity check we can revisit this when we see >> what kind of crazy that application is doing. > > > I already know two "applications" ;) > > https://github.com/torvalds/linux/blob/master/tools/testing/selftests/ptrace/peeksiginfo.c > https://github.com/checkpoint-restore/criu/blob/master/test/zdtm/static/sigpending.c > > Disclaimer: I'm the author of both of them. Looking at the kernel code the historical behavior has alwasy been to prefer the signal number passed in by the kernel. So sigh. Implmenet __copy_siginfo_from_user and __copy_siginfo_from_user32 to take that signal number and prefer it. The user of ptrace will still use copy_siginfo_from_user and copy_siginfo_from_user32 as they do not and never have had a signal number there. Luckily this change has never made it farther than linux-next. Fixes: e75dc036c445 ("signal: Fail sigqueueinfo if si_signo != sig") Reported-by: Andrei Vagin <avagin@gmail.com> Tested-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-10-05 07:02:48 +00:00
int ret = __copy_siginfo_from_user32(sig, &info, uinfo);
signal: Introduce copy_siginfo_from_user and use it's return value In preparation for using a smaller version of siginfo in the kernel introduce copy_siginfo_from_user and use it when siginfo is copied from userspace. Make the pattern for using copy_siginfo_from_user and copy_siginfo_from_user32 to capture the return value and return that value on error. This is a necessary prerequisite for using a smaller siginfo in the kernel than the kernel exports to userspace. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-04-18 22:30:19 +00:00
if (unlikely(ret))
return ret;
switch rt_tgsigqueueinfo to COMPAT_SYSCALL_DEFINE C ABI violations on sparc, ppc and mips Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-25 04:12:04 +00:00
return do_rt_tgsigqueueinfo(tgid, pid, sig, &info);
}
#endif
signals: mv {dis,}allow_signal() from sched.h/exit.c to signal.[ch] Move the declaration/definition of allow_signal/disallow_signal to signal.h/signal.c. The new place is more logical and allows to use the static helpers in signal.c (see the next changes). While at it, make them return void and remove the valid_signal() check. Nobody checks the returned value, and in-kernel users must not pass the wrong signal number. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Richard Weinberger <richard@nod.at> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 21:36:53 +00:00
/*
signals: introduce kernel_sigaction() Now that allow_signal() is really trivial we can unify it with disallow_signal(). Add the new helper, kernel_sigaction(), and reimplement allow_signal/disallow_signal as a trivial wrappers. This saves one EXPORT_SYMBOL() and the new helper can have more users. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Richard Weinberger <richard@nod.at> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 21:37:00 +00:00
* For kthreads only, must not be used if cloned with CLONE_SIGHAND
signals: mv {dis,}allow_signal() from sched.h/exit.c to signal.[ch] Move the declaration/definition of allow_signal/disallow_signal to signal.h/signal.c. The new place is more logical and allows to use the static helpers in signal.c (see the next changes). While at it, make them return void and remove the valid_signal() check. Nobody checks the returned value, and in-kernel users must not pass the wrong signal number. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Richard Weinberger <richard@nod.at> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 21:36:53 +00:00
*/
signals: introduce kernel_sigaction() Now that allow_signal() is really trivial we can unify it with disallow_signal(). Add the new helper, kernel_sigaction(), and reimplement allow_signal/disallow_signal as a trivial wrappers. This saves one EXPORT_SYMBOL() and the new helper can have more users. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Richard Weinberger <richard@nod.at> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 21:37:00 +00:00
void kernel_sigaction(int sig, __sighandler_t action)
signals: mv {dis,}allow_signal() from sched.h/exit.c to signal.[ch] Move the declaration/definition of allow_signal/disallow_signal to signal.h/signal.c. The new place is more logical and allows to use the static helpers in signal.c (see the next changes). While at it, make them return void and remove the valid_signal() check. Nobody checks the returned value, and in-kernel users must not pass the wrong signal number. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Richard Weinberger <richard@nod.at> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 21:36:53 +00:00
{
signals: kill the obsolete sigdelset() and recalc_sigpending() in allow_signal() allow_signal() does sigdelset(current->blocked) due to historic reason, previously it could be called by a daemonize()'ed kthread, and daemonize() played with current->blocked. Now that daemonize() has gone away we can remove sigdelset() and recalc_sigpending(). If a user really wants to unblock a signal, it must use sigprocmask() or set_current_block() explicitely. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Richard Weinberger <richard@nod.at> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 21:36:57 +00:00
spin_lock_irq(&current->sighand->siglock);
signals: introduce kernel_sigaction() Now that allow_signal() is really trivial we can unify it with disallow_signal(). Add the new helper, kernel_sigaction(), and reimplement allow_signal/disallow_signal as a trivial wrappers. This saves one EXPORT_SYMBOL() and the new helper can have more users. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Richard Weinberger <richard@nod.at> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 21:37:00 +00:00
current->sighand->action[sig - 1].sa.sa_handler = action;
if (action == SIG_IGN) {
sigset_t mask;
signals: mv {dis,}allow_signal() from sched.h/exit.c to signal.[ch] Move the declaration/definition of allow_signal/disallow_signal to signal.h/signal.c. The new place is more logical and allows to use the static helpers in signal.c (see the next changes). While at it, make them return void and remove the valid_signal() check. Nobody checks the returned value, and in-kernel users must not pass the wrong signal number. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Richard Weinberger <richard@nod.at> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 21:36:53 +00:00
signals: introduce kernel_sigaction() Now that allow_signal() is really trivial we can unify it with disallow_signal(). Add the new helper, kernel_sigaction(), and reimplement allow_signal/disallow_signal as a trivial wrappers. This saves one EXPORT_SYMBOL() and the new helper can have more users. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Richard Weinberger <richard@nod.at> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 21:37:00 +00:00
sigemptyset(&mask);
sigaddset(&mask, sig);
signals: disallow_signal() should flush the potentially pending signal disallow_signal() simply sets SIG_IGN, this is not enough and recalc_sigpending() is simply pointless because in can never change the state of TIF_SIGPENDING. If we ignore a signal, we also need to do flush_sigqueue_mask() for the case when this signal is pending, this way recalc_sigpending() can actually clear TIF_SIGPENDING and we do not "leak" the allocated siginfo's. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Richard Weinberger <richard@nod.at> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 21:36:58 +00:00
signals: introduce kernel_sigaction() Now that allow_signal() is really trivial we can unify it with disallow_signal(). Add the new helper, kernel_sigaction(), and reimplement allow_signal/disallow_signal as a trivial wrappers. This saves one EXPORT_SYMBOL() and the new helper can have more users. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Richard Weinberger <richard@nod.at> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 21:37:00 +00:00
flush_sigqueue_mask(&mask, &current->signal->shared_pending);
flush_sigqueue_mask(&mask, &current->pending);
recalc_sigpending();
}
signals: mv {dis,}allow_signal() from sched.h/exit.c to signal.[ch] Move the declaration/definition of allow_signal/disallow_signal to signal.h/signal.c. The new place is more logical and allows to use the static helpers in signal.c (see the next changes). While at it, make them return void and remove the valid_signal() check. Nobody checks the returned value, and in-kernel users must not pass the wrong signal number. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Richard Weinberger <richard@nod.at> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 21:36:53 +00:00
spin_unlock_irq(&current->sighand->siglock);
}
signals: introduce kernel_sigaction() Now that allow_signal() is really trivial we can unify it with disallow_signal(). Add the new helper, kernel_sigaction(), and reimplement allow_signal/disallow_signal as a trivial wrappers. This saves one EXPORT_SYMBOL() and the new helper can have more users. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Richard Weinberger <richard@nod.at> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 21:37:00 +00:00
EXPORT_SYMBOL(kernel_sigaction);
signals: mv {dis,}allow_signal() from sched.h/exit.c to signal.[ch] Move the declaration/definition of allow_signal/disallow_signal to signal.h/signal.c. The new place is more logical and allows to use the static helpers in signal.c (see the next changes). While at it, make them return void and remove the valid_signal() check. Nobody checks the returned value, and in-kernel users must not pass the wrong signal number. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Richard Weinberger <richard@nod.at> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 21:36:53 +00:00
x86/signal: Add SA_{X32,IA32}_ABI sa_flags Introduce new flags that defines which ABI to use on creating sigframe. Those flags kernel will set according to sigaction syscall ABI, which set handler for the signal being delivered. So that will drop the dependency on TIF_IA32/TIF_X32 flags on signal deliver. Those flags will be used only under CONFIG_COMPAT. Similar way ARM uses sa_flags to differ in which mode deliver signal for 26-bit applications (look at SA_THIRYTWO). Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com> Reviewed-by: Andy Lutomirski <luto@kernel.org> Cc: 0x7f454c46@gmail.com Cc: oleg@redhat.com Cc: linux-mm@kvack.org Cc: gorcunov@openvz.org Cc: xemul@virtuozzo.com Link: http://lkml.kernel.org/r/20160905133308.28234-7-dsafonov@virtuozzo.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-05 13:33:08 +00:00
void __weak sigaction_compat_abi(struct k_sigaction *act,
struct k_sigaction *oact)
{
}
[PATCH] do_sigaction: don't take tasklist_lock do_sigaction() does not need tasklist_lock anymore, we can simplify the code. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-29 00:11:24 +00:00
int do_sigaction(int sig, struct k_sigaction *act, struct k_sigaction *oact)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
signals: cleanup the usage of t/current in do_sigaction() The usage of "task_struct *t" and "current" in do_sigaction() looks really annoying and chaotic. Initially "t" is used as a cached value of current but not consistently, then it is reused as a loop variable and we have to use "current" again. Clean up this mess and also convert the code to use for_each_thread(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Richard Weinberger <richard@nod.at> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 21:36:51 +00:00
struct task_struct *p = current, *t;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct k_sigaction *k;
[PATCH] sigaction should clear all signals on SIG_IGN, not just < 32 While rooting aroung in the signal code trying to understand how to fix the SIG_IGN ploy (set sig handler to SIG_IGN and flood system with high speed repeating timers) I came across what, I think, is a problem in sigaction() in that when processing a SIG_IGN request it flushes signals from 1 to SIGRTMIN and leaves the rest. Attempt to fix this. Signed-off-by: George Anzinger <george@mvista.com> Cc: Roland McGrath <roland@redhat.com> Cc: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 09:02:48 +00:00
sigset_t mask;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[PATCH] convert that currently tests _NSIG directly to use valid_signal() Convert most of the current code that uses _NSIG directly to instead use valid_signal(). This avoids gcc -W warnings and off-by-one errors. Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 15:59:14 +00:00
if (!valid_signal(sig) || sig < 1 || (act && sig_kernel_only(sig)))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return -EINVAL;
signals: cleanup the usage of t/current in do_sigaction() The usage of "task_struct *t" and "current" in do_sigaction() looks really annoying and chaotic. Initially "t" is used as a cached value of current but not consistently, then it is reused as a loop variable and we have to use "current" again. Clean up this mess and also convert the code to use for_each_thread(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Richard Weinberger <richard@nod.at> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 21:36:51 +00:00
k = &p->sighand->action[sig-1];
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
signals: cleanup the usage of t/current in do_sigaction() The usage of "task_struct *t" and "current" in do_sigaction() looks really annoying and chaotic. Initially "t" is used as a cached value of current but not consistently, then it is reused as a loop variable and we have to use "current" again. Clean up this mess and also convert the code to use for_each_thread(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Richard Weinberger <richard@nod.at> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 21:36:51 +00:00
spin_lock_irq(&p->sighand->siglock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (oact)
*oact = *k;
x86/signal: Add SA_{X32,IA32}_ABI sa_flags Introduce new flags that defines which ABI to use on creating sigframe. Those flags kernel will set according to sigaction syscall ABI, which set handler for the signal being delivered. So that will drop the dependency on TIF_IA32/TIF_X32 flags on signal deliver. Those flags will be used only under CONFIG_COMPAT. Similar way ARM uses sa_flags to differ in which mode deliver signal for 26-bit applications (look at SA_THIRYTWO). Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com> Reviewed-by: Andy Lutomirski <luto@kernel.org> Cc: 0x7f454c46@gmail.com Cc: oleg@redhat.com Cc: linux-mm@kvack.org Cc: gorcunov@openvz.org Cc: xemul@virtuozzo.com Link: http://lkml.kernel.org/r/20160905133308.28234-7-dsafonov@virtuozzo.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-05 13:33:08 +00:00
sigaction_compat_abi(act, oact);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (act) {
[PATCH] do_sigaction: cleanup ->sa_mask manipulation Clear unblockable signals beforehand. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-09 19:41:50 +00:00
sigdelsetmask(&act->sa.sa_mask,
sigmask(SIGKILL) | sigmask(SIGSTOP));
[PATCH] do_sigaction: don't take tasklist_lock do_sigaction() does not need tasklist_lock anymore, we can simplify the code. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-29 00:11:24 +00:00
*k = *act;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* POSIX 3.3.1.3:
* "Setting a signal action to SIG_IGN for a signal that is
* pending shall cause the pending signal to be discarded,
* whether or not it is blocked."
*
* "Setting a signal action to SIG_DFL for a signal that is
* pending and whose default action is to ignore the signal
* (for example, SIGCHLD), shall cause the pending signal to
* be discarded, whether or not it is blocked"
*/
signals: cleanup the usage of t/current in do_sigaction() The usage of "task_struct *t" and "current" in do_sigaction() looks really annoying and chaotic. Initially "t" is used as a cached value of current but not consistently, then it is reused as a loop variable and we have to use "current" again. Clean up this mess and also convert the code to use for_each_thread(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Richard Weinberger <richard@nod.at> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 21:36:51 +00:00
if (sig_handler_ignored(sig_handler(p, sig), sig)) {
[PATCH] sigaction should clear all signals on SIG_IGN, not just < 32 While rooting aroung in the signal code trying to understand how to fix the SIG_IGN ploy (set sig handler to SIG_IGN and flood system with high speed repeating timers) I came across what, I think, is a problem in sigaction() in that when processing a SIG_IGN request it flushes signals from 1 to SIGRTMIN and leaves the rest. Attempt to fix this. Signed-off-by: George Anzinger <george@mvista.com> Cc: Roland McGrath <roland@redhat.com> Cc: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 09:02:48 +00:00
sigemptyset(&mask);
sigaddset(&mask, sig);
signals: cleanup the usage of t/current in do_sigaction() The usage of "task_struct *t" and "current" in do_sigaction() looks really annoying and chaotic. Initially "t" is used as a cached value of current but not consistently, then it is reused as a loop variable and we have to use "current" again. Clean up this mess and also convert the code to use for_each_thread(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Richard Weinberger <richard@nod.at> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 21:36:51 +00:00
flush_sigqueue_mask(&mask, &p->signal->shared_pending);
for_each_thread(p, t)
signals: rename rm_from_queue_full() to flush_sigqueue_mask() "rm_from_queue_full" looks ugly and misleading, especially now that rm_from_queue() has gone away. Rename it to flush_sigqueue_mask(), this matches flush_sigqueue() we already have. Also remove the obsolete comment which explains the difference with rm_from_queue() we already killed. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Richard Weinberger <richard@nod.at> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 21:36:50 +00:00
flush_sigqueue_mask(&mask, &t->pending);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
}
signals: cleanup the usage of t/current in do_sigaction() The usage of "task_struct *t" and "current" in do_sigaction() looks really annoying and chaotic. Initially "t" is used as a cached value of current but not consistently, then it is reused as a loop variable and we have to use "current" again. Clean up this mess and also convert the code to use for_each_thread(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Richard Weinberger <richard@nod.at> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 21:36:51 +00:00
spin_unlock_irq(&p->sighand->siglock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return 0;
}
signals: rename rm_from_queue_full() to flush_sigqueue_mask() "rm_from_queue_full" looks ugly and misleading, especially now that rm_from_queue() has gone away. Rename it to flush_sigqueue_mask(), this matches flush_sigqueue() we already have. Also remove the obsolete comment which explains the difference with rm_from_queue() we already killed. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Richard Weinberger <richard@nod.at> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 21:36:50 +00:00
static int
signal: Introduce COMPAT_SIGMINSTKSZ for use in compat_sys_sigaltstack The sigaltstack(2) system call fails with -ENOMEM if the new alternative signal stack is found to be smaller than SIGMINSTKSZ. On architectures such as arm64, where the native value for SIGMINSTKSZ is larger than the compat value, this can result in an unexpected error being reported to a compat task. See, for example: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=904385 This patch fixes the problem by extending do_sigaltstack to take the minimum signal stack size as an additional parameter, allowing the native and compat system call entry code to pass in their respective values. COMPAT_SIGMINSTKSZ is just defined as SIGMINSTKSZ if it has not been defined by the architecture. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Oleg Nesterov <oleg@redhat.com> Reported-by: Steve McIntyre <steve.mcintyre@arm.com> Tested-by: Steve McIntyre <93sam@debian.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-09-05 14:34:42 +00:00
do_sigaltstack (const stack_t *ss, stack_t *oss, unsigned long sp,
size_t min_ss_size)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
do_sigaltstack(): lift copying to/from userland into callers Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-05-27 04:29:34 +00:00
struct task_struct *t = current;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
do_sigaltstack(): lift copying to/from userland into callers Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-05-27 04:29:34 +00:00
if (oss) {
memset(oss, 0, sizeof(stack_t));
oss->ss_sp = (void __user *) t->sas_ss_sp;
oss->ss_size = t->sas_ss_size;
oss->ss_flags = sas_ss_flags(sp) |
(current->sas_ss_flags & SS_FLAG_BITS);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
do_sigaltstack(): lift copying to/from userland into callers Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-05-27 04:29:34 +00:00
if (ss) {
void __user *ss_sp = ss->ss_sp;
size_t ss_size = ss->ss_size;
unsigned ss_flags = ss->ss_flags;
signals/sigaltstack: Prepare to add new SS_xxx flags This patch adds SS_FLAG_BITS - the mask that splits sigaltstack mode values and bit-flags. Since there is no bit-flags yet, the mask is defined to 0. The flags are added by subsequent patches. With every new flag, the mask should have the appropriate bit cleared. This makes sure if some flag is tried on a kernel that doesn't support it, the -EINVAL error will be returned, because such a flag will be treated as an invalid mode rather than the bit-flag. That way the existence of the particular features can be probed at run-time. This change was suggested by Andy Lutomirski: https://lkml.org/lkml/2016/3/6/158 Signed-off-by: Stas Sergeev <stsp@list.ru> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Amanieu d'Antras <amanieu@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Weinberger <richard@nod.at> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: linux-api@vger.kernel.org Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/1460665206-13646-3-git-send-email-stsp@list.ru Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-14 20:20:03 +00:00
int ss_mode;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
do_sigaltstack(): lift copying to/from userland into callers Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-05-27 04:29:34 +00:00
if (unlikely(on_sig_stack(sp)))
return -EPERM;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
signals/sigaltstack: Prepare to add new SS_xxx flags This patch adds SS_FLAG_BITS - the mask that splits sigaltstack mode values and bit-flags. Since there is no bit-flags yet, the mask is defined to 0. The flags are added by subsequent patches. With every new flag, the mask should have the appropriate bit cleared. This makes sure if some flag is tried on a kernel that doesn't support it, the -EINVAL error will be returned, because such a flag will be treated as an invalid mode rather than the bit-flag. That way the existence of the particular features can be probed at run-time. This change was suggested by Andy Lutomirski: https://lkml.org/lkml/2016/3/6/158 Signed-off-by: Stas Sergeev <stsp@list.ru> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Amanieu d'Antras <amanieu@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Weinberger <richard@nod.at> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: linux-api@vger.kernel.org Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/1460665206-13646-3-git-send-email-stsp@list.ru Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-14 20:20:03 +00:00
ss_mode = ss_flags & ~SS_FLAG_BITS;
do_sigaltstack(): lift copying to/from userland into callers Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-05-27 04:29:34 +00:00
if (unlikely(ss_mode != SS_DISABLE && ss_mode != SS_ONSTACK &&
ss_mode != 0))
return -EINVAL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
signals/sigaltstack: Prepare to add new SS_xxx flags This patch adds SS_FLAG_BITS - the mask that splits sigaltstack mode values and bit-flags. Since there is no bit-flags yet, the mask is defined to 0. The flags are added by subsequent patches. With every new flag, the mask should have the appropriate bit cleared. This makes sure if some flag is tried on a kernel that doesn't support it, the -EINVAL error will be returned, because such a flag will be treated as an invalid mode rather than the bit-flag. That way the existence of the particular features can be probed at run-time. This change was suggested by Andy Lutomirski: https://lkml.org/lkml/2016/3/6/158 Signed-off-by: Stas Sergeev <stsp@list.ru> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Amanieu d'Antras <amanieu@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Weinberger <richard@nod.at> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: linux-api@vger.kernel.org Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/1460665206-13646-3-git-send-email-stsp@list.ru Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-14 20:20:03 +00:00
if (ss_mode == SS_DISABLE) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ss_size = 0;
ss_sp = NULL;
} else {
signal: Introduce COMPAT_SIGMINSTKSZ for use in compat_sys_sigaltstack The sigaltstack(2) system call fails with -ENOMEM if the new alternative signal stack is found to be smaller than SIGMINSTKSZ. On architectures such as arm64, where the native value for SIGMINSTKSZ is larger than the compat value, this can result in an unexpected error being reported to a compat task. See, for example: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=904385 This patch fixes the problem by extending do_sigaltstack to take the minimum signal stack size as an additional parameter, allowing the native and compat system call entry code to pass in their respective values. COMPAT_SIGMINSTKSZ is just defined as SIGMINSTKSZ if it has not been defined by the architecture. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Oleg Nesterov <oleg@redhat.com> Reported-by: Steve McIntyre <steve.mcintyre@arm.com> Tested-by: Steve McIntyre <93sam@debian.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-09-05 14:34:42 +00:00
if (unlikely(ss_size < min_ss_size))
do_sigaltstack(): lift copying to/from userland into callers Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-05-27 04:29:34 +00:00
return -ENOMEM;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
do_sigaltstack(): lift copying to/from userland into callers Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-05-27 04:29:34 +00:00
t->sas_ss_sp = (unsigned long) ss_sp;
t->sas_ss_size = ss_size;
t->sas_ss_flags = ss_flags;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
do_sigaltstack(): lift copying to/from userland into callers Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-05-27 04:29:34 +00:00
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
do_sigaltstack(): lift copying to/from userland into callers Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-05-27 04:29:34 +00:00
introduce generic sys_sigaltstack(), switch x86 and um to it Conditional on CONFIG_GENERIC_SIGALTSTACK; architectures that do not select it are completely unaffected Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-14 19:09:47 +00:00
SYSCALL_DEFINE2(sigaltstack,const stack_t __user *,uss, stack_t __user *,uoss)
{
do_sigaltstack(): lift copying to/from userland into callers Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-05-27 04:29:34 +00:00
stack_t new, old;
int err;
if (uss && copy_from_user(&new, uss, sizeof(stack_t)))
return -EFAULT;
err = do_sigaltstack(uss ? &new : NULL, uoss ? &old : NULL,
signal: Introduce COMPAT_SIGMINSTKSZ for use in compat_sys_sigaltstack The sigaltstack(2) system call fails with -ENOMEM if the new alternative signal stack is found to be smaller than SIGMINSTKSZ. On architectures such as arm64, where the native value for SIGMINSTKSZ is larger than the compat value, this can result in an unexpected error being reported to a compat task. See, for example: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=904385 This patch fixes the problem by extending do_sigaltstack to take the minimum signal stack size as an additional parameter, allowing the native and compat system call entry code to pass in their respective values. COMPAT_SIGMINSTKSZ is just defined as SIGMINSTKSZ if it has not been defined by the architecture. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Oleg Nesterov <oleg@redhat.com> Reported-by: Steve McIntyre <steve.mcintyre@arm.com> Tested-by: Steve McIntyre <93sam@debian.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-09-05 14:34:42 +00:00
current_user_stack_pointer(),
MINSIGSTKSZ);
do_sigaltstack(): lift copying to/from userland into callers Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-05-27 04:29:34 +00:00
if (!err && uoss && copy_to_user(uoss, &old, sizeof(stack_t)))
err = -EFAULT;
return err;
introduce generic sys_sigaltstack(), switch x86 and um to it Conditional on CONFIG_GENERIC_SIGALTSTACK; architectures that do not select it are completely unaffected Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-14 19:09:47 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
new helper: restore_altstack() to be used by rt_sigreturn instances Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-18 20:29:16 +00:00
int restore_altstack(const stack_t __user *uss)
{
do_sigaltstack(): lift copying to/from userland into callers Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-05-27 04:29:34 +00:00
stack_t new;
if (copy_from_user(&new, uss, sizeof(stack_t)))
return -EFAULT;
signal: Introduce COMPAT_SIGMINSTKSZ for use in compat_sys_sigaltstack The sigaltstack(2) system call fails with -ENOMEM if the new alternative signal stack is found to be smaller than SIGMINSTKSZ. On architectures such as arm64, where the native value for SIGMINSTKSZ is larger than the compat value, this can result in an unexpected error being reported to a compat task. See, for example: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=904385 This patch fixes the problem by extending do_sigaltstack to take the minimum signal stack size as an additional parameter, allowing the native and compat system call entry code to pass in their respective values. COMPAT_SIGMINSTKSZ is just defined as SIGMINSTKSZ if it has not been defined by the architecture. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Oleg Nesterov <oleg@redhat.com> Reported-by: Steve McIntyre <steve.mcintyre@arm.com> Tested-by: Steve McIntyre <93sam@debian.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-09-05 14:34:42 +00:00
(void)do_sigaltstack(&new, NULL, current_user_stack_pointer(),
MINSIGSTKSZ);
new helper: restore_altstack() to be used by rt_sigreturn instances Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-18 20:29:16 +00:00
/* squash all but EFAULT for now */
do_sigaltstack(): lift copying to/from userland into callers Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-05-27 04:29:34 +00:00
return 0;
new helper: restore_altstack() to be used by rt_sigreturn instances Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-18 20:29:16 +00:00
}
new helpers: __save_altstack/__compat_save_altstack, switch x86 and um to those note that they are relying on access_ok() already checked by caller. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-20 19:24:26 +00:00
int __save_altstack(stack_t __user *uss, unsigned long sp)
{
struct task_struct *t = current;
signals/sigaltstack: Implement SS_AUTODISARM flag This patch implements the SS_AUTODISARM flag that can be OR-ed with SS_ONSTACK when forming ss_flags. When this flag is set, sigaltstack will be disabled when entering the signal handler; more precisely, after saving sas to uc_stack. When leaving the signal handler, the sigaltstack is restored by uc_stack. When this flag is used, it is safe to switch from sighandler with swapcontext(). Without this flag, the subsequent signal will corrupt the state of the switched-away sighandler. To detect the support of this functionality, one can do: err = sigaltstack(SS_DISABLE | SS_AUTODISARM); if (err && errno == EINVAL) unsupported(); Signed-off-by: Stas Sergeev <stsp@list.ru> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Amanieu d'Antras <amanieu@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Jason Low <jason.low2@hp.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Moore <pmoore@redhat.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Weinberger <richard@nod.at> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: linux-api@vger.kernel.org Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/1460665206-13646-4-git-send-email-stsp@list.ru Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-14 20:20:04 +00:00
int err = __put_user((void __user *)t->sas_ss_sp, &uss->ss_sp) |
__put_user(t->sas_ss_flags, &uss->ss_flags) |
new helpers: __save_altstack/__compat_save_altstack, switch x86 and um to those note that they are relying on access_ok() already checked by caller. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-20 19:24:26 +00:00
__put_user(t->sas_ss_size, &uss->ss_size);
signals/sigaltstack: Implement SS_AUTODISARM flag This patch implements the SS_AUTODISARM flag that can be OR-ed with SS_ONSTACK when forming ss_flags. When this flag is set, sigaltstack will be disabled when entering the signal handler; more precisely, after saving sas to uc_stack. When leaving the signal handler, the sigaltstack is restored by uc_stack. When this flag is used, it is safe to switch from sighandler with swapcontext(). Without this flag, the subsequent signal will corrupt the state of the switched-away sighandler. To detect the support of this functionality, one can do: err = sigaltstack(SS_DISABLE | SS_AUTODISARM); if (err && errno == EINVAL) unsupported(); Signed-off-by: Stas Sergeev <stsp@list.ru> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Amanieu d'Antras <amanieu@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Jason Low <jason.low2@hp.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Moore <pmoore@redhat.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Weinberger <richard@nod.at> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: linux-api@vger.kernel.org Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/1460665206-13646-4-git-send-email-stsp@list.ru Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-14 20:20:04 +00:00
if (err)
return err;
if (t->sas_ss_flags & SS_AUTODISARM)
sas_ss_reset(t);
return 0;
new helpers: __save_altstack/__compat_save_altstack, switch x86 and um to those note that they are relying on access_ok() already checked by caller. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-20 19:24:26 +00:00
}
generic compat_sys_sigaltstack() Again, conditional on CONFIG_GENERIC_SIGALTSTACK Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-14 19:47:53 +00:00
#ifdef CONFIG_COMPAT
kernel: add do_compat_sigaltstack() helper; remove in-kernel call to compat syscall Using this helper allows us to avoid the in-kernel call to the compat_sys_sigaltstack() syscall. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-03-17 16:11:51 +00:00
static int do_compat_sigaltstack(const compat_stack_t __user *uss_ptr,
compat_stack_t __user *uoss_ptr)
generic compat_sys_sigaltstack() Again, conditional on CONFIG_GENERIC_SIGALTSTACK Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-14 19:47:53 +00:00
{
stack_t uss, uoss;
int ret;
if (uss_ptr) {
compat_stack_t uss32;
if (copy_from_user(&uss32, uss_ptr, sizeof(compat_stack_t)))
return -EFAULT;
uss.ss_sp = compat_ptr(uss32.ss_sp);
uss.ss_flags = uss32.ss_flags;
uss.ss_size = uss32.ss_size;
}
do_sigaltstack(): lift copying to/from userland into callers Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-05-27 04:29:34 +00:00
ret = do_sigaltstack(uss_ptr ? &uss : NULL, &uoss,
signal: Introduce COMPAT_SIGMINSTKSZ for use in compat_sys_sigaltstack The sigaltstack(2) system call fails with -ENOMEM if the new alternative signal stack is found to be smaller than SIGMINSTKSZ. On architectures such as arm64, where the native value for SIGMINSTKSZ is larger than the compat value, this can result in an unexpected error being reported to a compat task. See, for example: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=904385 This patch fixes the problem by extending do_sigaltstack to take the minimum signal stack size as an additional parameter, allowing the native and compat system call entry code to pass in their respective values. COMPAT_SIGMINSTKSZ is just defined as SIGMINSTKSZ if it has not been defined by the architecture. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Oleg Nesterov <oleg@redhat.com> Reported-by: Steve McIntyre <steve.mcintyre@arm.com> Tested-by: Steve McIntyre <93sam@debian.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-09-05 14:34:42 +00:00
compat_user_stack_pointer(),
COMPAT_MINSIGSTKSZ);
generic compat_sys_sigaltstack() Again, conditional on CONFIG_GENERIC_SIGALTSTACK Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-14 19:47:53 +00:00
if (ret >= 0 && uoss_ptr) {
do_sigaltstack(): lift copying to/from userland into callers Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-05-27 04:29:34 +00:00
compat_stack_t old;
memset(&old, 0, sizeof(old));
old.ss_sp = ptr_to_compat(uoss.ss_sp);
old.ss_flags = uoss.ss_flags;
old.ss_size = uoss.ss_size;
if (copy_to_user(uoss_ptr, &old, sizeof(compat_stack_t)))
generic compat_sys_sigaltstack() Again, conditional on CONFIG_GENERIC_SIGALTSTACK Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-14 19:47:53 +00:00
ret = -EFAULT;
}
return ret;
}
kernel: add do_compat_sigaltstack() helper; remove in-kernel call to compat syscall Using this helper allows us to avoid the in-kernel call to the compat_sys_sigaltstack() syscall. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-03-17 16:11:51 +00:00
COMPAT_SYSCALL_DEFINE2(sigaltstack,
const compat_stack_t __user *, uss_ptr,
compat_stack_t __user *, uoss_ptr)
{
return do_compat_sigaltstack(uss_ptr, uoss_ptr);
}
generic compat_sys_sigaltstack() Again, conditional on CONFIG_GENERIC_SIGALTSTACK Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-14 19:47:53 +00:00
int compat_restore_altstack(const compat_stack_t __user *uss)
{
kernel: add do_compat_sigaltstack() helper; remove in-kernel call to compat syscall Using this helper allows us to avoid the in-kernel call to the compat_sys_sigaltstack() syscall. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-03-17 16:11:51 +00:00
int err = do_compat_sigaltstack(uss, NULL);
generic compat_sys_sigaltstack() Again, conditional on CONFIG_GENERIC_SIGALTSTACK Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-14 19:47:53 +00:00
/* squash all but -EFAULT for now */
return err == -EFAULT ? err : 0;
}
new helpers: __save_altstack/__compat_save_altstack, switch x86 and um to those note that they are relying on access_ok() already checked by caller. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-20 19:24:26 +00:00
int __compat_save_altstack(compat_stack_t __user *uss, unsigned long sp)
{
sigaltstack: support SS_AUTODISARM for CONFIG_COMPAT Currently SS_AUTODISARM is not supported in compatibility mode, but does not return -EINVAL either. This makes dosemu built with -m32 on x86_64 to crash. Also the kernel's sigaltstack selftest fails if compiled with -m32. This patch adds the needed support. Link: http://lkml.kernel.org/r/20170205101213.8163-2-stsp@list.ru Signed-off-by: Stas Sergeev <stsp@users.sourceforge.net> Cc: Milosz Tanski <milosz@adfin.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Waiman Long <Waiman.Long@hpe.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dmitry Safonov <dsafonov@virtuozzo.com> Cc: Wang Xiaoqiang <wangxq10@lzu.edu.cn> Cc: Oleg Nesterov <oleg@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27 22:27:25 +00:00
int err;
new helpers: __save_altstack/__compat_save_altstack, switch x86 and um to those note that they are relying on access_ok() already checked by caller. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-20 19:24:26 +00:00
struct task_struct *t = current;
sigaltstack: support SS_AUTODISARM for CONFIG_COMPAT Currently SS_AUTODISARM is not supported in compatibility mode, but does not return -EINVAL either. This makes dosemu built with -m32 on x86_64 to crash. Also the kernel's sigaltstack selftest fails if compiled with -m32. This patch adds the needed support. Link: http://lkml.kernel.org/r/20170205101213.8163-2-stsp@list.ru Signed-off-by: Stas Sergeev <stsp@users.sourceforge.net> Cc: Milosz Tanski <milosz@adfin.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Waiman Long <Waiman.Long@hpe.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dmitry Safonov <dsafonov@virtuozzo.com> Cc: Wang Xiaoqiang <wangxq10@lzu.edu.cn> Cc: Oleg Nesterov <oleg@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27 22:27:25 +00:00
err = __put_user(ptr_to_compat((void __user *)t->sas_ss_sp),
&uss->ss_sp) |
__put_user(t->sas_ss_flags, &uss->ss_flags) |
new helpers: __save_altstack/__compat_save_altstack, switch x86 and um to those note that they are relying on access_ok() already checked by caller. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-20 19:24:26 +00:00
__put_user(t->sas_ss_size, &uss->ss_size);
sigaltstack: support SS_AUTODISARM for CONFIG_COMPAT Currently SS_AUTODISARM is not supported in compatibility mode, but does not return -EINVAL either. This makes dosemu built with -m32 on x86_64 to crash. Also the kernel's sigaltstack selftest fails if compiled with -m32. This patch adds the needed support. Link: http://lkml.kernel.org/r/20170205101213.8163-2-stsp@list.ru Signed-off-by: Stas Sergeev <stsp@users.sourceforge.net> Cc: Milosz Tanski <milosz@adfin.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Waiman Long <Waiman.Long@hpe.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dmitry Safonov <dsafonov@virtuozzo.com> Cc: Wang Xiaoqiang <wangxq10@lzu.edu.cn> Cc: Oleg Nesterov <oleg@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27 22:27:25 +00:00
if (err)
return err;
if (t->sas_ss_flags & SS_AUTODISARM)
sas_ss_reset(t);
return 0;
new helpers: __save_altstack/__compat_save_altstack, switch x86 and um to those note that they are relying on access_ok() already checked by caller. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-20 19:24:26 +00:00
}
generic compat_sys_sigaltstack() Again, conditional on CONFIG_GENERIC_SIGALTSTACK Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-14 19:47:53 +00:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#ifdef __ARCH_WANT_SYS_SIGPENDING
kernel/signal.c: add kernel-doc notation to syscalls Add kernel-doc to syscalls in signal.c. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-04 22:00:26 +00:00
/**
* sys_sigpending - examine pending signals
kernel: open-code sys_rt_sigpending() in sys_sigpending() A similar but not fully equivalent code path is already open-coded three times (in sys_rt_sigpending and in the two compat stubs), so do it a fourth time here. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-03-11 10:34:37 +00:00
* @uset: where mask of pending signal is returned
kernel/signal.c: add kernel-doc notation to syscalls Add kernel-doc to syscalls in signal.c. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-04 22:00:26 +00:00
*/
kernel: open-code sys_rt_sigpending() in sys_sigpending() A similar but not fully equivalent code path is already open-coded three times (in sys_rt_sigpending and in the two compat stubs), so do it a fourth time here. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-03-11 10:34:37 +00:00
SYSCALL_DEFINE1(sigpending, old_sigset_t __user *, uset)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
kernel: open-code sys_rt_sigpending() in sys_sigpending() A similar but not fully equivalent code path is already open-coded three times (in sys_rt_sigpending and in the two compat stubs), so do it a fourth time here. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-03-11 10:34:37 +00:00
sigset_t set;
if (sizeof(old_sigset_t) > sizeof(*uset))
return -EINVAL;
signal: make do_sigpending() void do_sigpending() returned 0 unconditionally so it doesn't make sense to have it return at all. This allows us to simplify a bunch of syscall callers. Link: http://lkml.kernel.org/r/20180602103653.18181-5-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Morris <james.morris@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 05:00:02 +00:00
do_sigpending(&set);
if (copy_to_user(uset, &set, sizeof(old_sigset_t)))
return -EFAULT;
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
sigpending(): move compat to native ... and kill set_fs() use Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-05-31 08:42:07 +00:00
#ifdef CONFIG_COMPAT
COMPAT_SYSCALL_DEFINE1(sigpending, compat_old_sigset_t __user *, set32)
{
sigset_t set;
signal: make do_sigpending() void do_sigpending() returned 0 unconditionally so it doesn't make sense to have it return at all. This allows us to simplify a bunch of syscall callers. Link: http://lkml.kernel.org/r/20180602103653.18181-5-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Morris <james.morris@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 05:00:02 +00:00
do_sigpending(&set);
return put_user(set.sig[0], set32);
sigpending(): move compat to native ... and kill set_fs() use Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-05-31 08:42:07 +00:00
}
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#endif
#ifdef __ARCH_WANT_SYS_SIGPROCMASK
kernel/signal.c: add kernel-doc notation to syscalls Add kernel-doc to syscalls in signal.c. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-04 22:00:26 +00:00
/**
* sys_sigprocmask - examine and change blocked signals
* @how: whether to add, remove, or set signals
signal: cleanup sys_sigprocmask() Cleanup. Remove the unneeded goto's, we can simply read blocked.sig[0] unconditionally and then copy-to-user it if oset != NULL. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com>
2011-04-28 09:36:20 +00:00
* @nset: signals to add or remove (if non-null)
kernel/signal.c: add kernel-doc notation to syscalls Add kernel-doc to syscalls in signal.c. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-04 22:00:26 +00:00
* @oset: previous value of signal mask if non-null
*
kernel/signal.c: fix typos and coding style General coding style and comment fixes; no code changes: - Use multi-line-comment coding style. - Put some function signatures completely on one line. - Hyphenate some words. - Spell Posix as POSIX. - Correct typos & spellos in some comments. - Drop trailing whitespace. - End sentences with periods. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-04 21:59:31 +00:00
* Some platforms have their own version with special arguments;
* others support only sys_rt_sigprocmask.
*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
signal: cleanup sys_sigprocmask() Cleanup. Remove the unneeded goto's, we can simply read blocked.sig[0] unconditionally and then copy-to-user it if oset != NULL. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com>
2011-04-28 09:36:20 +00:00
SYSCALL_DEFINE3(sigprocmask, int, how, old_sigset_t __user *, nset,
[CVE-2009-0029] System call wrappers part 04 Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 13:14:06 +00:00
old_sigset_t __user *, oset)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
old_sigset_t old_set, new_set;
signal: sys_sigprocmask() needs retarget_shared_pending() sys_sigprocmask() changes current->blocked by hand. Convert this code to use set_current_blocked(). Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-05-09 11:48:56 +00:00
sigset_t new_blocked;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
signal: cleanup sys_sigprocmask() Cleanup. Remove the unneeded goto's, we can simply read blocked.sig[0] unconditionally and then copy-to-user it if oset != NULL. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com>
2011-04-28 09:36:20 +00:00
old_set = current->blocked.sig[0];
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
signal: cleanup sys_sigprocmask() Cleanup. Remove the unneeded goto's, we can simply read blocked.sig[0] unconditionally and then copy-to-user it if oset != NULL. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com>
2011-04-28 09:36:20 +00:00
if (nset) {
if (copy_from_user(&new_set, nset, sizeof(*nset)))
return -EFAULT;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
signal: sys_sigprocmask() needs retarget_shared_pending() sys_sigprocmask() changes current->blocked by hand. Convert this code to use set_current_blocked(). Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-05-09 11:48:56 +00:00
new_blocked = current->blocked;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
switch (how) {
case SIG_BLOCK:
signal: sys_sigprocmask() needs retarget_shared_pending() sys_sigprocmask() changes current->blocked by hand. Convert this code to use set_current_blocked(). Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-05-09 11:48:56 +00:00
sigaddsetmask(&new_blocked, new_set);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
break;
case SIG_UNBLOCK:
signal: sys_sigprocmask() needs retarget_shared_pending() sys_sigprocmask() changes current->blocked by hand. Convert this code to use set_current_blocked(). Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-05-09 11:48:56 +00:00
sigdelsetmask(&new_blocked, new_set);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
break;
case SIG_SETMASK:
signal: sys_sigprocmask() needs retarget_shared_pending() sys_sigprocmask() changes current->blocked by hand. Convert this code to use set_current_blocked(). Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-05-09 11:48:56 +00:00
new_blocked.sig[0] = new_set;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
break;
signal: sys_sigprocmask() needs retarget_shared_pending() sys_sigprocmask() changes current->blocked by hand. Convert this code to use set_current_blocked(). Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-05-09 11:48:56 +00:00
default:
return -EINVAL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
signals: set_current_blocked() can use __set_current_blocked() Cleanup. And I think we need more cleanups, in particular __set_current_blocked() and sigprocmask() should die. Nobody should ever block SIGKILL or SIGSTOP. - Change set_current_blocked() to use __set_current_blocked() - Change sys_sigprocmask() to use set_current_blocked(), this way it should not worry about SIGKILL/SIGSTOP. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-05 18:13:29 +00:00
set_current_blocked(&new_blocked);
signal: cleanup sys_sigprocmask() Cleanup. Remove the unneeded goto's, we can simply read blocked.sig[0] unconditionally and then copy-to-user it if oset != NULL. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com>
2011-04-28 09:36:20 +00:00
}
if (oset) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (copy_to_user(oset, &old_set, sizeof(*oset)))
signal: cleanup sys_sigprocmask() Cleanup. Remove the unneeded goto's, we can simply read blocked.sig[0] unconditionally and then copy-to-user it if oset != NULL. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com>
2011-04-28 09:36:20 +00:00
return -EFAULT;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
signal: cleanup sys_sigprocmask() Cleanup. Remove the unneeded goto's, we can simply read blocked.sig[0] unconditionally and then copy-to-user it if oset != NULL. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com>
2011-04-28 09:36:20 +00:00
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
#endif /* __ARCH_WANT_SYS_SIGPROCMASK */
sanitize rt_sigaction() situation a bit Switch from __ARCH_WANT_SYS_RT_SIGACTION to opposite (!CONFIG_ODD_RT_SIGACTION); the only two architectures that need it are alpha and sparc. The reason for use of CONFIG_... instead of __ARCH_... is that it's needed only kernel-side and doing it that way avoids a mess with include order on many architectures. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-26 04:12:10 +00:00
#ifndef CONFIG_ODD_RT_SIGACTION
kernel/signal.c: add kernel-doc notation to syscalls Add kernel-doc to syscalls in signal.c. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-04 22:00:26 +00:00
/**
* sys_rt_sigaction - alter an action taken by a process
* @sig: signal to be sent
signal.c: fix erroneous syscall kernel-doc Fix erroneous syscall kernel-doc comments in kernel/signal.c. Reported-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-08 17:53:46 +00:00
* @act: new sigaction
* @oact: used to save the previous sigaction
kernel/signal.c: add kernel-doc notation to syscalls Add kernel-doc to syscalls in signal.c. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-04 22:00:26 +00:00
* @sigsetsize: size of sigset_t type
*/
[CVE-2009-0029] System call wrappers part 32 Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 13:14:34 +00:00
SYSCALL_DEFINE4(rt_sigaction, int, sig,
const struct sigaction __user *, act,
struct sigaction __user *, oact,
size_t, sigsetsize)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct k_sigaction new_sa, old_sa;
signal: simplify rt_sigaction() The goto is not needed and does not add any clarity. Simply return -EINVAL on unexpected sigset_t struct size directly. Link: http://lkml.kernel.org/r/20180602103653.18181-6-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Acked-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Morris <james.morris@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 05:00:07 +00:00
int ret;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* XXX: Don't preclude handling different sized sigset_t's. */
if (sigsetsize != sizeof(sigset_t))
signal: simplify rt_sigaction() The goto is not needed and does not add any clarity. Simply return -EINVAL on unexpected sigset_t struct size directly. Link: http://lkml.kernel.org/r/20180602103653.18181-6-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Acked-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Morris <james.morris@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 05:00:07 +00:00
return -EINVAL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
signal: simplify rt_sigaction() The goto is not needed and does not add any clarity. Simply return -EINVAL on unexpected sigset_t struct size directly. Link: http://lkml.kernel.org/r/20180602103653.18181-6-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Acked-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Morris <james.morris@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 05:00:07 +00:00
if (act && copy_from_user(&new_sa.sa, act, sizeof(new_sa.sa)))
return -EFAULT;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ret = do_sigaction(sig, act ? &new_sa : NULL, oact ? &old_sa : NULL);
signal: simplify rt_sigaction() The goto is not needed and does not add any clarity. Simply return -EINVAL on unexpected sigset_t struct size directly. Link: http://lkml.kernel.org/r/20180602103653.18181-6-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Acked-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Morris <james.morris@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 05:00:07 +00:00
if (ret)
return ret;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
signal: simplify rt_sigaction() The goto is not needed and does not add any clarity. Simply return -EINVAL on unexpected sigset_t struct size directly. Link: http://lkml.kernel.org/r/20180602103653.18181-6-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Acked-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Morris <james.morris@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 05:00:07 +00:00
if (oact && copy_to_user(oact, &old_sa.sa, sizeof(old_sa.sa)))
return -EFAULT;
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
generic sys_compat_rt_sigaction() Again, protected by a temporary config symbol (GENERIC_COMPAT_RT_SIGACTION); will be gone by the end of series. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-25 23:38:15 +00:00
#ifdef CONFIG_COMPAT
COMPAT_SYSCALL_DEFINE4(rt_sigaction, int, sig,
const struct compat_sigaction __user *, act,
struct compat_sigaction __user *, oact,
compat_size_t, sigsetsize)
{
struct k_sigaction new_ka, old_ka;
#ifdef __ARCH_HAS_SA_RESTORER
compat_uptr_t restorer;
#endif
int ret;
/* XXX: Don't preclude handling different sized sigset_t's. */
if (sigsetsize != sizeof(compat_sigset_t))
return -EINVAL;
if (act) {
compat_uptr_t handler;
ret = get_user(handler, &act->sa_handler);
new_ka.sa.sa_handler = compat_ptr(handler);
#ifdef __ARCH_HAS_SA_RESTORER
ret |= get_user(restorer, &act->sa_restorer);
new_ka.sa.sa_restorer = compat_ptr(restorer);
#endif
get_compat_sigset() similar to put_compat_sigset() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-09-04 01:45:17 +00:00
ret |= get_compat_sigset(&new_ka.sa.sa_mask, &act->sa_mask);
kernel-wide: fix missing validations on __get/__put/__copy_to/__copy_from_user() I found the following pattern that leads in to interesting findings: grep -r "ret.*|=.*__put_user" * grep -r "ret.*|=.*__get_user" * grep -r "ret.*|=.*__copy" * The __put_user() calls in compat_ioctl.c, ptrace compat, signal compat, since those appear in compat code, we could probably expect the kernel addresses not to be reachable in the lower 32-bit range, so I think they might not be exploitable. For the "__get_user" cases, I don't think those are exploitable: the worse that can happen is that the kernel will copy kernel memory into in-kernel buffers, and will fail immediately afterward. The alpha csum_partial_copy_from_user() seems to be missing the access_ok() check entirely. The fix is inspired from x86. This could lead to information leak on alpha. I also noticed that many architectures map csum_partial_copy_from_user() to csum_partial_copy_generic(), but I wonder if the latter is performing the access checks on every architectures. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:23:18 +00:00
ret |= get_user(new_ka.sa.sa_flags, &act->sa_flags);
generic sys_compat_rt_sigaction() Again, protected by a temporary config symbol (GENERIC_COMPAT_RT_SIGACTION); will be gone by the end of series. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-25 23:38:15 +00:00
if (ret)
return -EFAULT;
}
ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
if (!ret && oact) {
ret = put_user(ptr_to_compat(old_ka.sa.sa_handler),
&oact->sa_handler);
signal: replace sigset_to_compat() with put_compat_sigset() There are 4 callers of sigset_to_compat() in the entire kernel. One is in sparc compat rt_sigaction(2), the rest are in kernel/signal.c itself. All are followed by copy_to_user(), and all but the sparc one are under "if it's big-endian..." ifdefs. Let's transform sigset_to_compat() into put_compat_sigset() that also calls copy_to_user(). Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-08-21 23:16:11 +00:00
ret |= put_compat_sigset(&oact->sa_mask, &old_ka.sa.sa_mask,
sizeof(oact->sa_mask));
kernel-wide: fix missing validations on __get/__put/__copy_to/__copy_from_user() I found the following pattern that leads in to interesting findings: grep -r "ret.*|=.*__put_user" * grep -r "ret.*|=.*__get_user" * grep -r "ret.*|=.*__copy" * The __put_user() calls in compat_ioctl.c, ptrace compat, signal compat, since those appear in compat code, we could probably expect the kernel addresses not to be reachable in the lower 32-bit range, so I think they might not be exploitable. For the "__get_user" cases, I don't think those are exploitable: the worse that can happen is that the kernel will copy kernel memory into in-kernel buffers, and will fail immediately afterward. The alpha csum_partial_copy_from_user() seems to be missing the access_ok() check entirely. The fix is inspired from x86. This could lead to information leak on alpha. I also noticed that many architectures map csum_partial_copy_from_user() to csum_partial_copy_generic(), but I wonder if the latter is performing the access checks on every architectures. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:23:18 +00:00
ret |= put_user(old_ka.sa.sa_flags, &oact->sa_flags);
generic sys_compat_rt_sigaction() Again, protected by a temporary config symbol (GENERIC_COMPAT_RT_SIGACTION); will be gone by the end of series. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-25 23:38:15 +00:00
#ifdef __ARCH_HAS_SA_RESTORER
ret |= put_user(ptr_to_compat(old_ka.sa.sa_restorer),
&oact->sa_restorer);
#endif
}
return ret;
}
#endif
sanitize rt_sigaction() situation a bit Switch from __ARCH_WANT_SYS_RT_SIGACTION to opposite (!CONFIG_ODD_RT_SIGACTION); the only two architectures that need it are alpha and sparc. The reason for use of CONFIG_... instead of __ARCH_... is that it's needed only kernel-side and doing it that way avoids a mess with include order on many architectures. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-26 04:12:10 +00:00
#endif /* !CONFIG_ODD_RT_SIGACTION */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
generic sys_sigaction() and compat_sys_sigaction() conditional on OLD_SIGACTION/COMPAT_OLD_SIGACTION Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-26 00:09:45 +00:00
#ifdef CONFIG_OLD_SIGACTION
SYSCALL_DEFINE3(sigaction, int, sig,
const struct old_sigaction __user *, act,
struct old_sigaction __user *, oact)
{
struct k_sigaction new_ka, old_ka;
int ret;
if (act) {
old_sigset_t mask;
Remove 'type' argument from access_ok() function Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 02:57:57 +00:00
if (!access_ok(act, sizeof(*act)) ||
generic sys_sigaction() and compat_sys_sigaction() conditional on OLD_SIGACTION/COMPAT_OLD_SIGACTION Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-26 00:09:45 +00:00
__get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
__get_user(new_ka.sa.sa_restorer, &act->sa_restorer) ||
__get_user(new_ka.sa.sa_flags, &act->sa_flags) ||
__get_user(mask, &act->sa_mask))
return -EFAULT;
#ifdef __ARCH_HAS_KA_RESTORER
new_ka.ka_restorer = NULL;
#endif
siginitset(&new_ka.sa.sa_mask, mask);
}
ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
if (!ret && oact) {
Remove 'type' argument from access_ok() function Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 02:57:57 +00:00
if (!access_ok(oact, sizeof(*oact)) ||
generic sys_sigaction() and compat_sys_sigaction() conditional on OLD_SIGACTION/COMPAT_OLD_SIGACTION Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-26 00:09:45 +00:00
__put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
__put_user(old_ka.sa.sa_restorer, &oact->sa_restorer) ||
__put_user(old_ka.sa.sa_flags, &oact->sa_flags) ||
__put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask))
return -EFAULT;
}
return ret;
}
#endif
#ifdef CONFIG_COMPAT_OLD_SIGACTION
COMPAT_SYSCALL_DEFINE3(sigaction, int, sig,
const struct compat_old_sigaction __user *, act,
struct compat_old_sigaction __user *, oact)
{
struct k_sigaction new_ka, old_ka;
int ret;
compat_old_sigset_t mask;
compat_uptr_t handler, restorer;
if (act) {
Remove 'type' argument from access_ok() function Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 02:57:57 +00:00
if (!access_ok(act, sizeof(*act)) ||
generic sys_sigaction() and compat_sys_sigaction() conditional on OLD_SIGACTION/COMPAT_OLD_SIGACTION Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-26 00:09:45 +00:00
__get_user(handler, &act->sa_handler) ||
__get_user(restorer, &act->sa_restorer) ||
__get_user(new_ka.sa.sa_flags, &act->sa_flags) ||
__get_user(mask, &act->sa_mask))
return -EFAULT;
#ifdef __ARCH_HAS_KA_RESTORER
new_ka.ka_restorer = NULL;
#endif
new_ka.sa.sa_handler = compat_ptr(handler);
new_ka.sa.sa_restorer = compat_ptr(restorer);
siginitset(&new_ka.sa.sa_mask, mask);
}
ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
if (!ret && oact) {
Remove 'type' argument from access_ok() function Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 02:57:57 +00:00
if (!access_ok(oact, sizeof(*oact)) ||
generic sys_sigaction() and compat_sys_sigaction() conditional on OLD_SIGACTION/COMPAT_OLD_SIGACTION Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-26 00:09:45 +00:00
__put_user(ptr_to_compat(old_ka.sa.sa_handler),
&oact->sa_handler) ||
__put_user(ptr_to_compat(old_ka.sa.sa_restorer),
&oact->sa_restorer) ||
__put_user(old_ka.sa.sa_flags, &oact->sa_flags) ||
__put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask))
return -EFAULT;
}
return ret;
}
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
sys_sgetmask/sys_ssetmask: add CONFIG_SGETMASK_SYSCALL sys_sgetmask and sys_ssetmask are obsolete system calls no longer supported in libc. This patch replaces architecture related __ARCH_WANT_SYS_SGETMAX by expert mode configuration.That option is enabled by default for those architectures. Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Steven Miao <realmz6@gmail.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:11:12 +00:00
#ifdef CONFIG_SGETMASK_SYSCALL
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* For backwards compatibility. Functionality superseded by sigprocmask.
*/
[CVE-2009-0029] System call wrappers part 09 Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 13:14:11 +00:00
SYSCALL_DEFINE0(sgetmask)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
/* SMP safe */
return current->blocked.sig[0];
}
[CVE-2009-0029] System call wrappers part 09 Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 13:14:11 +00:00
SYSCALL_DEFINE1(ssetmask, int, newmask)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
signals: sys_ssetmask/sys_rt_sigsuspend should use set_current_blocked() sys_ssetmask(), sys_rt_sigsuspend() and compat_sys_rt_sigsuspend() change ->blocked directly. This is not correct, see the changelog in e6fa16ab "signal: sigprocmask() should do retarget_shared_pending()" Change them to use set_current_blocked(). Another change is that now we are doing ->saved_sigmask = ->blocked lockless, it doesn't make any sense to do this under ->siglock. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 19:49:44 +00:00
int old = current->blocked.sig[0];
sigset_t newset;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
signals: sys_ssetmask() uses uninitialized newmask Commit 77097ae503b1 ("most of set_current_blocked() callers want SIGKILL/SIGSTOP removed from set") removed the initialization of newmask by accident, causing ltp to complain like this: ssetmask01 1 TFAIL : sgetmask() failed: TEST_ERRNO=???(0): Success Restore the proper initialization. Reported-and-tested-by: CAI Qian <caiqian@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: stable@kernel.org # v3.5+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-05 18:13:13 +00:00
siginitset(&newset, newmask);
signals: sys_ssetmask/sys_rt_sigsuspend should use set_current_blocked() sys_ssetmask(), sys_rt_sigsuspend() and compat_sys_rt_sigsuspend() change ->blocked directly. This is not correct, see the changelog in e6fa16ab "signal: sigprocmask() should do retarget_shared_pending()" Change them to use set_current_blocked(). Another change is that now we are doing ->saved_sigmask = ->blocked lockless, it doesn't make any sense to do this under ->siglock. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 19:49:44 +00:00
set_current_blocked(&newset);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return old;
}
sys_sgetmask/sys_ssetmask: add CONFIG_SGETMASK_SYSCALL sys_sgetmask and sys_ssetmask are obsolete system calls no longer supported in libc. This patch replaces architecture related __ARCH_WANT_SYS_SGETMAX by expert mode configuration.That option is enabled by default for those architectures. Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Steven Miao <realmz6@gmail.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:11:12 +00:00
#endif /* CONFIG_SGETMASK_SYSCALL */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#ifdef __ARCH_WANT_SYS_SIGNAL
/*
* For backwards compatibility. Functionality superseded by sigaction.
*/
[CVE-2009-0029] System call wrappers part 09 Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 13:14:11 +00:00
SYSCALL_DEFINE2(signal, int, sig, __sighandler_t, handler)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct k_sigaction new_sa, old_sa;
int ret;
new_sa.sa.sa_handler = handler;
new_sa.sa.sa_flags = SA_ONESHOT | SA_NOMASK;
[PATCH] sys_signal: initialize ->sa_mask Pointed out by Linus Torvalds. sys_signal() forgets to initialize ->sa_mask. ( I suspect arch/ia64/ia32/ia32_signal.c:sys32_signal() also needs this fix ) Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-09 19:41:41 +00:00
sigemptyset(&new_sa.sa.sa_mask);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ret = do_sigaction(sig, &new_sa, &old_sa);
return ret ? ret : (unsigned long)old_sa.sa.sa_handler;
}
#endif /* __ARCH_WANT_SYS_SIGNAL */
#ifdef __ARCH_WANT_SYS_PAUSE
[CVE-2009-0029] System call wrappers part 09 Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 13:14:11 +00:00
SYSCALL_DEFINE0(pause)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
signal: sys_pause() should check signal_pending() ERESTART* is always wrong without TIF_SIGPENDING. Teach sys_pause() to handle the spurious wakeup correctly. Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-05-25 17:22:27 +00:00
while (!signal_pending(current)) {
signal: use current->state helpers Call __set_current_state() instead of assigning the new state directly. These interfaces also aid CONFIG_DEBUG_ATOMIC_SLEEP environments, keeping track of who changed the state. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-17 21:45:41 +00:00
__set_current_state(TASK_INTERRUPTIBLE);
signal: sys_pause() should check signal_pending() ERESTART* is always wrong without TIF_SIGPENDING. Teach sys_pause() to handle the spurious wakeup correctly. Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-05-25 17:22:27 +00:00
schedule();
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return -ERESTARTNOHAND;
}
#endif
kernel/signal.c: unexport sigsuspend() sigsuspend() is nowhere used except in signal.c itself, so we can mark it static do not pollute the global namespace. But this patch is more than a boring cleanup patch, it fixes a real issue on UserModeLinux. UML has a special console driver to display ttys using xterm, or other terminal emulators, on the host side. Vegard reported that sometimes UML is unable to spawn a xterm and he's facing the following warning: WARNING: CPU: 0 PID: 908 at include/linux/thread_info.h:128 sigsuspend+0xab/0xc0() It turned out that this warning makes absolutely no sense as the UML xterm code calls sigsuspend() on the host side, at least it tries. But as the kernel itself offers a sigsuspend() symbol the linker choose this one instead of the glibc wrapper. Interestingly this code used to work since ever but always blocked signals on the wrong side. Some recent kernel change made the WARN_ON() trigger and uncovered the bug. It is a wonderful example of how much works by chance on computers. :-) Fixes: 68f3f16d9ad0f1 ("new helper: sigsuspend()") Signed-off-by: Richard Weinberger <richard@nod.at> Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Tested-by: Vegard Nossum <vegard.nossum@oracle.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: <stable@vger.kernel.org> [3.5+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-20 23:57:21 +00:00
static int sigsuspend(sigset_t *set)
new helper: sigsuspend() guts of saved_sigmask-based sigsuspend/rt_sigsuspend. Takes kernel sigset_t *. Open-coded instances replaced with calling it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-22 01:42:32 +00:00
{
current->saved_sigmask = current->blocked;
set_current_blocked(set);
signals: avoid random wakeups in sigsuspend() A random wakeup can get us out of sigsuspend() without TIF_SIGPENDING being set. Avoid that by making sure we were signaled, like sys_pause() does. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-05 23:36:05 +00:00
while (!signal_pending(current)) {
__set_current_state(TASK_INTERRUPTIBLE);
schedule();
}
new helper: sigsuspend() guts of saved_sigmask-based sigsuspend/rt_sigsuspend. Takes kernel sigset_t *. Open-coded instances replaced with calling it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-22 01:42:32 +00:00
set_restore_sigmask();
return -ERESTARTNOHAND;
}
kernel/signal.c: add kernel-doc notation to syscalls Add kernel-doc to syscalls in signal.c. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-04 22:00:26 +00:00
/**
* sys_rt_sigsuspend - replace the signal mask for a value with the
* @unewset value until a signal is received
* @unewset: new signal mask value
* @sigsetsize: size of sigset_t type
*/
[CVE-2009-0029] System call wrappers part 32 Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 13:14:34 +00:00
SYSCALL_DEFINE2(rt_sigsuspend, sigset_t __user *, unewset, size_t, sigsetsize)
[PATCH] Generic sys_rt_sigsuspend() The TIF_RESTORE_SIGMASK flag allows us to have a generic implementation of sys_rt_sigsuspend() instead of duplicating it for each architecture. This provides such an implementation and makes arch/powerpc use it. It also tidies up the ppc32 sys_sigsuspend() to use TIF_RESTORE_SIGMASK. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19 01:43:57 +00:00
{
sigset_t newset;
/* XXX: Don't preclude handling different sized sigset_t's. */
if (sigsetsize != sizeof(sigset_t))
return -EINVAL;
if (copy_from_user(&newset, unewset, sizeof(newset)))
return -EFAULT;
new helper: sigsuspend() guts of saved_sigmask-based sigsuspend/rt_sigsuspend. Takes kernel sigset_t *. Open-coded instances replaced with calling it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-22 01:42:32 +00:00
return sigsuspend(&newset);
[PATCH] Generic sys_rt_sigsuspend() The TIF_RESTORE_SIGMASK flag allows us to have a generic implementation of sys_rt_sigsuspend() instead of duplicating it for each architecture. This provides such an implementation and makes arch/powerpc use it. It also tidies up the ppc32 sys_sigsuspend() to use TIF_RESTORE_SIGMASK. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19 01:43:57 +00:00
}
consolidate rt_sigsuspend() * pull compat version alongside with the native one * make little-endian compat variant just call the native * don't bother with separate conditional for compat (both native and compat are going to become unconditional very soon). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-25 02:43:56 +00:00
#ifdef CONFIG_COMPAT
COMPAT_SYSCALL_DEFINE2(rt_sigsuspend, compat_sigset_t __user *, unewset, compat_size_t, sigsetsize)
{
sigset_t newset;
/* XXX: Don't preclude handling different sized sigset_t's. */
if (sigsetsize != sizeof(sigset_t))
return -EINVAL;
get_compat_sigset() similar to put_compat_sigset() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-09-04 01:45:17 +00:00
if (get_compat_sigset(&newset, unewset))
consolidate rt_sigsuspend() * pull compat version alongside with the native one * make little-endian compat variant just call the native * don't bother with separate conditional for compat (both native and compat are going to become unconditional very soon). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-25 02:43:56 +00:00
return -EFAULT;
return sigsuspend(&newset);
}
#endif
[PATCH] Generic sys_rt_sigsuspend() The TIF_RESTORE_SIGMASK flag allows us to have a generic implementation of sys_rt_sigsuspend() instead of duplicating it for each architecture. This provides such an implementation and makes arch/powerpc use it. It also tidies up the ppc32 sys_sigsuspend() to use TIF_RESTORE_SIGMASK. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19 01:43:57 +00:00
old sigsuspend variants in kernel/signal.c conditional on OLD_SIGSUSPEND/OLD_SIGSUSPEND3, depending on which variety of that fossil is needed. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-25 21:04:12 +00:00
#ifdef CONFIG_OLD_SIGSUSPEND
SYSCALL_DEFINE1(sigsuspend, old_sigset_t, mask)
{
sigset_t blocked;
siginitset(&blocked, mask);
return sigsuspend(&blocked);
}
#endif
#ifdef CONFIG_OLD_SIGSUSPEND3
SYSCALL_DEFINE3(sigsuspend, int, unused1, int, unused2, old_sigset_t, mask)
{
sigset_t blocked;
siginitset(&blocked, mask);
return sigsuspend(&blocked);
}
#endif
[PATCH] Generic sys_rt_sigsuspend() The TIF_RESTORE_SIGMASK flag allows us to have a generic implementation of sys_rt_sigsuspend() instead of duplicating it for each architecture. This provides such an implementation and makes arch/powerpc use it. It also tidies up the ppc32 sys_sigsuspend() to use TIF_RESTORE_SIGMASK. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19 01:43:57 +00:00
kernel: use macros from compiler.h instead of __attribute__((...)) To increase compiler portability there is <linux/compiler.h> which provides convenience macros for various gcc constructs. Eg: __weak for __attribute__((weak)). I've replaced all instances of gcc attributes with the right macro in the kernel subsystem. Signed-off-by: Gideon Israel Dsouza <gidisrael@gmail.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 22:39:20 +00:00
__weak const char *arch_vma_name(struct vm_area_struct *vma)
[PATCH] NOMMU: move the fallback arch_vma_name() to a sensible place Move the fallback arch_vma_name() to a sensible place (kernel/signal.c). Currently it's in fs/proc/task_mmu.c, a file that is dependent on both CONFIG_PROC_FS and CONFIG_MMU being enabled, but it's used from kernel/signal.c from where it is called unconditionally. [akpm@osdl.org: build fix] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27 08:50:23 +00:00
{
return NULL;
}
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
static inline void siginfo_buildtime_checks(void)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
signal: Ensure no siginfo union member increases the size of struct siginfo Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-20 02:23:15 +00:00
BUILD_BUG_ON(sizeof(struct siginfo) != SI_MAX_SIZE);
kernel/signal.c: add compile-time check for __ARCH_SI_PREAMBLE_SIZE The value of __ARCH_SI_PREAMBLE_SIZE defines the size (including padding) of the part of the struct siginfo that is before the union, and it is then used to calculate the needed padding (SI_PAD_SIZE) to make the size of struct siginfo equal to 128 (SI_MAX_SIZE) bytes. Depending on the target architecture and word width it equals to either 3 or 4 times sizeof int. Since the very beginning we had __ARCH_SI_PREAMBLE_SIZE wrong on the parisc architecture for the 64bit kernel build. It's even more frustrating, because it can easily be checked at compile time if the value was defined correctly. This patch adds such a check for the correctness of __ARCH_SI_PREAMBLE_SIZE in the hope that it will prevent existing and future architectures from running into the same problem. I refrained from replacing __ARCH_SI_PREAMBLE_SIZE by offsetof() in copy_siginfo() in include/asm-generic/siginfo.h, because a) it doesn't make any difference and b) it's used in the Documentation/kmemcheck.txt example. I ran this patch through the 0-DAY kernel test infrastructure and only the parisc architecture triggered as expected. That means that this patch should be OK for all major architectures. Signed-off-by: Helge Deller <deller@gmx.de> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22 21:27:54 +00:00
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
/* Verify the offsets in the two siginfos match */
#define CHECK_OFFSET(field) \
BUILD_BUG_ON(offsetof(siginfo_t, field) != offsetof(kernel_siginfo_t, field))
/* kill */
CHECK_OFFSET(si_pid);
CHECK_OFFSET(si_uid);
/* timer */
CHECK_OFFSET(si_tid);
CHECK_OFFSET(si_overrun);
CHECK_OFFSET(si_value);
/* rt */
CHECK_OFFSET(si_pid);
CHECK_OFFSET(si_uid);
CHECK_OFFSET(si_value);
/* sigchld */
CHECK_OFFSET(si_pid);
CHECK_OFFSET(si_uid);
CHECK_OFFSET(si_status);
CHECK_OFFSET(si_utime);
CHECK_OFFSET(si_stime);
/* sigfault */
CHECK_OFFSET(si_addr);
CHECK_OFFSET(si_addr_lsb);
CHECK_OFFSET(si_lower);
CHECK_OFFSET(si_upper);
CHECK_OFFSET(si_pkey);
/* sigpoll */
CHECK_OFFSET(si_band);
CHECK_OFFSET(si_fd);
/* sigsys */
CHECK_OFFSET(si_call_addr);
CHECK_OFFSET(si_syscall);
CHECK_OFFSET(si_arch);
#undef CHECK_OFFSET
signal/usb: Replace kill_pid_info_as_cred with kill_pid_usb_asyncio The usb support for asyncio encoded one of it's values in the wrong field. It should have used si_value but instead used si_addr which is not present in the _rt union member of struct siginfo. The practical result of this is that on a 64bit big endian kernel when delivering a signal to a 32bit process the si_addr field is set to NULL, instead of the expected pointer value. This issue can not be fixed in copy_siginfo_to_user32 as the usb usage of the the _sigfault (aka si_addr) member of the siginfo union when SI_ASYNCIO is set is incompatible with the POSIX and glibc usage of the _rt member of the siginfo union. Therefore replace kill_pid_info_as_cred with kill_pid_usb_asyncio a dedicated function for this one specific case. There are no other users of kill_pid_info_as_cred so this specialization should have no impact on the amount of code in the kernel. Have kill_pid_usb_asyncio take instead of a siginfo_t which is difficult and error prone, 3 arguments, a signal number, an errno value, and an address enconded as a sigval_t. The encoding of the address as a sigval_t allows the code that reads the userspace request for a signal to handle this compat issue along with all of the other compat issues. Add BUILD_BUG_ONs in kernel/signal.c to ensure that we can now place the pointer value at the in si_pid (instead of si_addr). That is the code now verifies that si_pid and si_addr always occur at the same location. Further the code veries that for native structures a value placed in si_pid and spilling into si_uid will appear in userspace in si_addr (on a byte by byte copy of siginfo or a field by field copy of siginfo). The code also verifies that for a 64bit kernel and a 32bit userspace the 32bit pointer will fit in si_pid. I have used the usbsig.c program below written by Alan Stern and slightly tweaked by me to run on a big endian machine to verify the issue exists (on sparc64) and to confirm the patch below fixes the issue. /* usbsig.c -- test USB async signal delivery */ #define _GNU_SOURCE #include <stdio.h> #include <fcntl.h> #include <signal.h> #include <string.h> #include <sys/ioctl.h> #include <unistd.h> #include <endian.h> #include <linux/usb/ch9.h> #include <linux/usbdevice_fs.h> static struct usbdevfs_urb urb; static struct usbdevfs_disconnectsignal ds; static volatile sig_atomic_t done = 0; void urb_handler(int sig, siginfo_t *info , void *ucontext) { printf("Got signal %d, signo %d errno %d code %d addr: %p urb: %p\n", sig, info->si_signo, info->si_errno, info->si_code, info->si_addr, &urb); printf("%s\n", (info->si_addr == &urb) ? "Good" : "Bad"); } void ds_handler(int sig, siginfo_t *info , void *ucontext) { printf("Got signal %d, signo %d errno %d code %d addr: %p ds: %p\n", sig, info->si_signo, info->si_errno, info->si_code, info->si_addr, &ds); printf("%s\n", (info->si_addr == &ds) ? "Good" : "Bad"); done = 1; } int main(int argc, char **argv) { char *devfilename; int fd; int rc; struct sigaction act; struct usb_ctrlrequest *req; void *ptr; char buf[80]; if (argc != 2) { fprintf(stderr, "Usage: usbsig device-file-name\n"); return 1; } devfilename = argv[1]; fd = open(devfilename, O_RDWR); if (fd == -1) { perror("Error opening device file"); return 1; } act.sa_sigaction = urb_handler; sigemptyset(&act.sa_mask); act.sa_flags = SA_SIGINFO; rc = sigaction(SIGUSR1, &act, NULL); if (rc == -1) { perror("Error in sigaction"); return 1; } act.sa_sigaction = ds_handler; sigemptyset(&act.sa_mask); act.sa_flags = SA_SIGINFO; rc = sigaction(SIGUSR2, &act, NULL); if (rc == -1) { perror("Error in sigaction"); return 1; } memset(&urb, 0, sizeof(urb)); urb.type = USBDEVFS_URB_TYPE_CONTROL; urb.endpoint = USB_DIR_IN | 0; urb.buffer = buf; urb.buffer_length = sizeof(buf); urb.signr = SIGUSR1; req = (struct usb_ctrlrequest *) buf; req->bRequestType = USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE; req->bRequest = USB_REQ_GET_DESCRIPTOR; req->wValue = htole16(USB_DT_DEVICE << 8); req->wIndex = htole16(0); req->wLength = htole16(sizeof(buf) - sizeof(*req)); rc = ioctl(fd, USBDEVFS_SUBMITURB, &urb); if (rc == -1) { perror("Error in SUBMITURB ioctl"); return 1; } rc = ioctl(fd, USBDEVFS_REAPURB, &ptr); if (rc == -1) { perror("Error in REAPURB ioctl"); return 1; } memset(&ds, 0, sizeof(ds)); ds.signr = SIGUSR2; ds.context = &ds; rc = ioctl(fd, USBDEVFS_DISCSIGNAL, &ds); if (rc == -1) { perror("Error in DISCSIGNAL ioctl"); return 1; } printf("Waiting for usb disconnect\n"); while (!done) { sleep(1); } close(fd); return 0; } Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Oliver Neukum <oneukum@suse.com> Fixes: v2.3.39 Cc: stable@vger.kernel.org Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-02-08 01:44:12 +00:00
/* usb asyncio */
BUILD_BUG_ON(offsetof(struct siginfo, si_pid) !=
offsetof(struct siginfo, si_addr));
if (sizeof(int) == sizeof(void __user *)) {
BUILD_BUG_ON(sizeof_field(struct siginfo, si_pid) !=
sizeof(void __user *));
} else {
BUILD_BUG_ON((sizeof_field(struct siginfo, si_pid) +
sizeof_field(struct siginfo, si_uid)) !=
sizeof(void __user *));
BUILD_BUG_ON(offsetofend(struct siginfo, si_pid) !=
offsetof(struct siginfo, si_uid));
}
#ifdef CONFIG_COMPAT
BUILD_BUG_ON(offsetof(struct compat_siginfo, si_pid) !=
offsetof(struct compat_siginfo, si_addr));
BUILD_BUG_ON(sizeof_field(struct compat_siginfo, si_pid) !=
sizeof(compat_uptr_t));
BUILD_BUG_ON(sizeof_field(struct compat_siginfo, si_pid) !=
sizeof_field(struct siginfo, si_pid));
#endif
signal: Distinguish between kernel_siginfo and siginfo Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25 09:27:20 +00:00
}
void __init signals_init(void)
{
siginfo_buildtime_checks();
KMEM_CACHE(): simplify slab cache creation This patch provides a new macro KMEM_CACHE(<struct>, <flags>) to simplify slab creation. KMEM_CACHE creates a slab with the name of the struct, with the size of the struct and with the alignment of the struct. Additional slab flags may be specified if necessary. Example struct test_slab { int a,b,c; struct list_head; } __cacheline_aligned_in_smp; test_slab_cache = KMEM_CACHE(test_slab, SLAB_PANIC) will create a new slab named "test_slab" of the size sizeof(struct test_slab) and aligned to the alignment of test slab. If it fails then we panic. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 21:49:57 +00:00
sigqueue_cachep = KMEM_CACHE(sigqueue, SLAB_PANIC);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
kdb: core for kgdb back end (2 of 2) This patch contains the hooks and instrumentation into kernel which live outside the kernel/debug directory, which the kdb core will call to run commands like lsmod, dmesg, bt etc... CC: linux-arch@vger.kernel.org Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Martin Hicks <mort@sgi.com>
2010-05-21 02:04:21 +00:00
#ifdef CONFIG_KGDB_KDB
#include <linux/kdb.h>
/*
signal: Simplify and fix kdb_send_sig - Rename from kdb_send_sig_info to kdb_send_sig As there is no meaningful siginfo sent - Use SEND_SIG_PRIV instead of generating a siginfo for a kdb signal. The generated siginfo had a bogus rationale and was not correct in the face of pid namespaces. SEND_SIG_PRIV is simpler and actually correct. - As the code grabs siglock just send the signal with siglock held instead of dropping siglock and attempting to grab it again. - Move the sig_valid test into kdb_kill where it can generate a good error message. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2017-08-17 20:45:38 +00:00
* kdb_send_sig - Allows kdb to send signals without exposing
kdb: core for kgdb back end (2 of 2) This patch contains the hooks and instrumentation into kernel which live outside the kernel/debug directory, which the kdb core will call to run commands like lsmod, dmesg, bt etc... CC: linux-arch@vger.kernel.org Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Martin Hicks <mort@sgi.com>
2010-05-21 02:04:21 +00:00
* signal internals. This function checks if the required locks are
* available before calling the main signal code, to avoid kdb
* deadlocks.
*/
signal: Simplify and fix kdb_send_sig - Rename from kdb_send_sig_info to kdb_send_sig As there is no meaningful siginfo sent - Use SEND_SIG_PRIV instead of generating a siginfo for a kdb signal. The generated siginfo had a bogus rationale and was not correct in the face of pid namespaces. SEND_SIG_PRIV is simpler and actually correct. - As the code grabs siglock just send the signal with siglock held instead of dropping siglock and attempting to grab it again. - Move the sig_valid test into kdb_kill where it can generate a good error message. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2017-08-17 20:45:38 +00:00
void kdb_send_sig(struct task_struct *t, int sig)
kdb: core for kgdb back end (2 of 2) This patch contains the hooks and instrumentation into kernel which live outside the kernel/debug directory, which the kdb core will call to run commands like lsmod, dmesg, bt etc... CC: linux-arch@vger.kernel.org Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Martin Hicks <mort@sgi.com>
2010-05-21 02:04:21 +00:00
{
static struct task_struct *kdb_prev_t;
signal: Simplify and fix kdb_send_sig - Rename from kdb_send_sig_info to kdb_send_sig As there is no meaningful siginfo sent - Use SEND_SIG_PRIV instead of generating a siginfo for a kdb signal. The generated siginfo had a bogus rationale and was not correct in the face of pid namespaces. SEND_SIG_PRIV is simpler and actually correct. - As the code grabs siglock just send the signal with siglock held instead of dropping siglock and attempting to grab it again. - Move the sig_valid test into kdb_kill where it can generate a good error message. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2017-08-17 20:45:38 +00:00
int new_t, ret;
kdb: core for kgdb back end (2 of 2) This patch contains the hooks and instrumentation into kernel which live outside the kernel/debug directory, which the kdb core will call to run commands like lsmod, dmesg, bt etc... CC: linux-arch@vger.kernel.org Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Martin Hicks <mort@sgi.com>
2010-05-21 02:04:21 +00:00
if (!spin_trylock(&t->sighand->siglock)) {
kdb_printf("Can't do kill command now.\n"
"The sigmask lock is held somewhere else in "
"kernel, try again later\n");
return;
}
new_t = kdb_prev_t != t;
kdb_prev_t = t;
if (t->state != TASK_RUNNING && new_t) {
signal: Simplify and fix kdb_send_sig - Rename from kdb_send_sig_info to kdb_send_sig As there is no meaningful siginfo sent - Use SEND_SIG_PRIV instead of generating a siginfo for a kdb signal. The generated siginfo had a bogus rationale and was not correct in the face of pid namespaces. SEND_SIG_PRIV is simpler and actually correct. - As the code grabs siglock just send the signal with siglock held instead of dropping siglock and attempting to grab it again. - Move the sig_valid test into kdb_kill where it can generate a good error message. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2017-08-17 20:45:38 +00:00
spin_unlock(&t->sighand->siglock);
kdb: core for kgdb back end (2 of 2) This patch contains the hooks and instrumentation into kernel which live outside the kernel/debug directory, which the kdb core will call to run commands like lsmod, dmesg, bt etc... CC: linux-arch@vger.kernel.org Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Martin Hicks <mort@sgi.com>
2010-05-21 02:04:21 +00:00
kdb_printf("Process is not RUNNING, sending a signal from "
"kdb risks deadlock\n"
"on the run queue locks. "
"The signal has _not_ been sent.\n"
"Reissue the kill command if you want to risk "
"the deadlock.\n");
return;
}
signal: Push pid type down into send_signal This information is already available in the callers and by pushing it down it makes the code a little clearer, and allows better group signal behavior in fork. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-07-20 20:49:17 +00:00
ret = send_signal(sig, SEND_SIG_PRIV, t, PIDTYPE_PID);
signal: Simplify and fix kdb_send_sig - Rename from kdb_send_sig_info to kdb_send_sig As there is no meaningful siginfo sent - Use SEND_SIG_PRIV instead of generating a siginfo for a kdb signal. The generated siginfo had a bogus rationale and was not correct in the face of pid namespaces. SEND_SIG_PRIV is simpler and actually correct. - As the code grabs siglock just send the signal with siglock held instead of dropping siglock and attempting to grab it again. - Move the sig_valid test into kdb_kill where it can generate a good error message. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2017-08-17 20:45:38 +00:00
spin_unlock(&t->sighand->siglock);
if (ret)
kdb: core for kgdb back end (2 of 2) This patch contains the hooks and instrumentation into kernel which live outside the kernel/debug directory, which the kdb core will call to run commands like lsmod, dmesg, bt etc... CC: linux-arch@vger.kernel.org Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Martin Hicks <mort@sgi.com>
2010-05-21 02:04:21 +00:00
kdb_printf("Fail to deliver Signal %d to process %d.\n",
sig, t->pid);
else
kdb_printf("Signal %d is sent to process %d.\n", sig, t->pid);
}
#endif /* CONFIG_KGDB_KDB */
Reference in a new issue Copy permalink