linux-stable/net/hsr/hsr_main.h

293 lines
8.3 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0 */
/* Copyright 2011-2014 Autronica Fire and Security AS
*
* Author(s):
* 2011-2014 Arvid Brodin, arvid.brodin@alten.se
*
* include file for HSR and PRP.
*/
#ifndef __HSR_PRIVATE_H
#define __HSR_PRIVATE_H
#include <linux/netdevice.h>
#include <linux/list.h>
#include <linux/if_vlan.h>
#include <linux/if_hsr.h>
/* Time constants as specified in the HSR specification (IEC-62439-3 2010)
* Table 8.
* All values in milliseconds.
*/
#define HSR_LIFE_CHECK_INTERVAL 2000 /* ms */
#define HSR_NODE_FORGET_TIME 60000 /* ms */
#define HSR_ANNOUNCE_INTERVAL 100 /* ms */
#define HSR_ENTRY_FORGET_TIME 400 /* ms */
/* By how much may slave1 and slave2 timestamps of latest received frame from
* each node differ before we notify of communication problem?
*/
#define MAX_SLAVE_DIFF 3000 /* ms */
#define HSR_SEQNR_START (USHRT_MAX - 1024)
#define HSR_SUP_SEQNR_START (HSR_SEQNR_START / 2)
/* How often shall we check for broken ring and remove node entries older than
* HSR_NODE_FORGET_TIME?
*/
#define PRUNE_PERIOD 3000 /* ms */
#define HSR_TLV_EOT 0 /* End of TLVs */
#define HSR_TLV_ANNOUNCE 22
#define HSR_TLV_LIFE_CHECK 23
/* PRP V1 life check for Duplicate discard */
#define PRP_TLV_LIFE_CHECK_DD 20
/* PRP V1 life check for Duplicate Accept */
#define PRP_TLV_LIFE_CHECK_DA 21
/* PRP V1 life redundancy box MAC address */
#define PRP_TLV_REDBOX_MAC 30
#define HSR_V1_SUP_LSDUSIZE 52
net: hsr: use hlist_head instead of list_head for mac addresses Currently, HSR manages mac addresses of known HSR nodes by using list_head. It takes a lot of time when there are a lot of registered nodes due to finding specific mac address nodes by using linear search. We can be reducing the time by using hlist. Thus, this patch moves list_head to hlist_head for mac addresses and this allows for further improvement of network performance. Condition: registered 10,000 known HSR nodes Before: # iperf3 -c 192.168.10.1 -i 1 -t 10 Connecting to host 192.168.10.1, port 5201 [ 5] local 192.168.10.2 port 59442 connected to 192.168.10.1 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.49 sec 3.75 MBytes 21.1 Mbits/sec 0 158 KBytes [ 5] 1.49-2.05 sec 1.25 MBytes 18.7 Mbits/sec 0 166 KBytes [ 5] 2.05-3.06 sec 2.44 MBytes 20.3 Mbits/sec 56 16.9 KBytes [ 5] 3.06-4.08 sec 1.43 MBytes 11.7 Mbits/sec 11 38.0 KBytes [ 5] 4.08-5.00 sec 951 KBytes 8.49 Mbits/sec 0 56.3 KBytes After: # iperf3 -c 192.168.10.1 -i 1 -t 10 Connecting to host 192.168.10.1, port 5201 [ 5] local 192.168.10.2 port 36460 connected to 192.168.10.1 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 7.39 MBytes 62.0 Mbits/sec 3 130 KBytes [ 5] 1.00-2.00 sec 5.06 MBytes 42.4 Mbits/sec 16 113 KBytes [ 5] 2.00-3.00 sec 8.58 MBytes 72.0 Mbits/sec 42 94.3 KBytes [ 5] 3.00-4.00 sec 7.44 MBytes 62.4 Mbits/sec 2 131 KBytes [ 5] 4.00-5.07 sec 8.13 MBytes 63.5 Mbits/sec 38 92.9 KBytes Signed-off-by: Juhee Kang <claudiajkang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-05 15:40:38 +00:00
#define HSR_HSIZE_SHIFT 8
#define HSR_HSIZE BIT(HSR_HSIZE_SHIFT)
/* The helper functions below assumes that 'path' occupies the 4 most
* significant bits of the 16-bit field shared by 'path' and 'LSDU_size' (or
* equivalently, the 4 most significant bits of HSR tag byte 14).
*
* This is unclear in the IEC specification; its definition of MAC addresses
* indicates the spec is written with the least significant bit first (to the
* left). This, however, would mean that the LSDU field would be split in two
* with the path field in-between, which seems strange. I'm guessing the MAC
* address definition is in error.
*/
static inline void set_hsr_tag_path(struct hsr_tag *ht, u16 path)
{
ht->path_and_LSDU_size =
htons((ntohs(ht->path_and_LSDU_size) & 0x0FFF) | (path << 12));
}
static inline void set_hsr_tag_LSDU_size(struct hsr_tag *ht, u16 LSDU_size)
{
ht->path_and_LSDU_size = htons((ntohs(ht->path_and_LSDU_size) &
0xF000) | (LSDU_size & 0x0FFF));
}
struct hsr_ethhdr {
struct ethhdr ethhdr;
struct hsr_tag hsr_tag;
} __packed;
struct hsr_vlan_ethhdr {
struct vlan_ethhdr vlanhdr;
struct hsr_tag hsr_tag;
} __packed;
struct hsr_sup_tlv {
u8 HSR_TLV_type;
u8 HSR_TLV_length;
};
/* HSR/PRP Supervision Frame data types.
* Field names as defined in the IEC:2010 standard for HSR.
*/
struct hsr_sup_tag {
__be16 path_and_HSR_ver;
__be16 sequence_nr;
struct hsr_sup_tlv tlv;
} __packed;
struct hsr_sup_payload {
unsigned char macaddress_A[ETH_ALEN];
} __packed;
static inline void set_hsr_stag_path(struct hsr_sup_tag *hst, u16 path)
{
set_hsr_tag_path((struct hsr_tag *)hst, path);
}
static inline void set_hsr_stag_HSR_ver(struct hsr_sup_tag *hst, u16 HSR_ver)
{
set_hsr_tag_LSDU_size((struct hsr_tag *)hst, HSR_ver);
}
struct hsrv0_ethhdr_sp {
struct ethhdr ethhdr;
struct hsr_sup_tag hsr_sup;
} __packed;
struct hsrv1_ethhdr_sp {
struct ethhdr ethhdr;
struct hsr_tag hsr;
struct hsr_sup_tag hsr_sup;
} __packed;
enum hsr_port_type {
HSR_PT_NONE = 0, /* Must be 0, used by framereg */
HSR_PT_SLAVE_A,
HSR_PT_SLAVE_B,
HSR_PT_INTERLINK,
HSR_PT_MASTER,
HSR_PT_PORTS, /* This must be the last item in the enum */
};
/* PRP Redunancy Control Trailor (RCT).
* As defined in IEC-62439-4:2012, the PRP RCT is really { sequence Nr,
* Lan indentifier (LanId), LSDU_size and PRP_suffix = 0x88FB }.
*
* Field names as defined in the IEC:2012 standard for PRP.
*/
struct prp_rct {
__be16 sequence_nr;
__be16 lan_id_and_LSDU_size;
__be16 PRP_suffix;
} __packed;
static inline u16 get_prp_LSDU_size(struct prp_rct *rct)
{
return ntohs(rct->lan_id_and_LSDU_size) & 0x0FFF;
}
static inline void set_prp_lan_id(struct prp_rct *rct, u16 lan_id)
{
rct->lan_id_and_LSDU_size = htons((ntohs(rct->lan_id_and_LSDU_size) &
0x0FFF) | (lan_id << 12));
}
static inline void set_prp_LSDU_size(struct prp_rct *rct, u16 LSDU_size)
{
rct->lan_id_and_LSDU_size = htons((ntohs(rct->lan_id_and_LSDU_size) &
0xF000) | (LSDU_size & 0x0FFF));
}
struct hsr_port {
struct list_head port_list;
struct net_device *dev;
struct hsr_priv *hsr;
enum hsr_port_type type;
};
struct hsr_frame_info;
struct hsr_node;
struct hsr_proto_ops {
/* format and send supervision frame */
void (*send_sv_frame)(struct hsr_port *port, unsigned long *interval);
void (*handle_san_frame)(bool san, enum hsr_port_type port,
struct hsr_node *node);
bool (*drop_frame)(struct hsr_frame_info *frame, struct hsr_port *port);
struct sk_buff * (*get_untagged_frame)(struct hsr_frame_info *frame,
struct hsr_port *port);
struct sk_buff * (*create_tagged_frame)(struct hsr_frame_info *frame,
struct hsr_port *port);
int (*fill_frame_info)(__be16 proto, struct sk_buff *skb,
struct hsr_frame_info *frame);
bool (*invalid_dan_ingress_frame)(__be16 protocol);
void (*update_san_info)(struct hsr_node *node, bool is_sup);
};
struct hsr_priv {
struct rcu_head rcu_head;
struct list_head ports;
net: hsr: use hlist_head instead of list_head for mac addresses Currently, HSR manages mac addresses of known HSR nodes by using list_head. It takes a lot of time when there are a lot of registered nodes due to finding specific mac address nodes by using linear search. We can be reducing the time by using hlist. Thus, this patch moves list_head to hlist_head for mac addresses and this allows for further improvement of network performance. Condition: registered 10,000 known HSR nodes Before: # iperf3 -c 192.168.10.1 -i 1 -t 10 Connecting to host 192.168.10.1, port 5201 [ 5] local 192.168.10.2 port 59442 connected to 192.168.10.1 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.49 sec 3.75 MBytes 21.1 Mbits/sec 0 158 KBytes [ 5] 1.49-2.05 sec 1.25 MBytes 18.7 Mbits/sec 0 166 KBytes [ 5] 2.05-3.06 sec 2.44 MBytes 20.3 Mbits/sec 56 16.9 KBytes [ 5] 3.06-4.08 sec 1.43 MBytes 11.7 Mbits/sec 11 38.0 KBytes [ 5] 4.08-5.00 sec 951 KBytes 8.49 Mbits/sec 0 56.3 KBytes After: # iperf3 -c 192.168.10.1 -i 1 -t 10 Connecting to host 192.168.10.1, port 5201 [ 5] local 192.168.10.2 port 36460 connected to 192.168.10.1 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 7.39 MBytes 62.0 Mbits/sec 3 130 KBytes [ 5] 1.00-2.00 sec 5.06 MBytes 42.4 Mbits/sec 16 113 KBytes [ 5] 2.00-3.00 sec 8.58 MBytes 72.0 Mbits/sec 42 94.3 KBytes [ 5] 3.00-4.00 sec 7.44 MBytes 62.4 Mbits/sec 2 131 KBytes [ 5] 4.00-5.07 sec 8.13 MBytes 63.5 Mbits/sec 38 92.9 KBytes Signed-off-by: Juhee Kang <claudiajkang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-05 15:40:38 +00:00
struct hlist_head node_db[HSR_HSIZE]; /* Known HSR nodes */
struct hlist_head self_node_db; /* MACs of slaves */
struct timer_list announce_timer; /* Supervision frame dispatch */
struct timer_list prune_timer;
int announce_count;
u16 sequence_nr;
u16 sup_sequence_nr; /* For HSRv1 separate seq_nr for supervision */
enum hsr_version prot_version; /* Indicate if HSRv0, HSRv1 or PRPv1 */
hsr: fix a race condition in node list insertion and deletion hsr nodes are protected by RCU and there is no write side lock. But node insertions and deletions could be being operated concurrently. So write side locking is needed. Test commands: ip netns add nst ip link add veth0 type veth peer name veth1 ip link add veth2 type veth peer name veth3 ip link set veth1 netns nst ip link set veth3 netns nst ip link set veth0 up ip link set veth2 up ip link add hsr0 type hsr slave1 veth0 slave2 veth2 ip a a 192.168.100.1/24 dev hsr0 ip link set hsr0 up ip netns exec nst ip link set veth1 up ip netns exec nst ip link set veth3 up ip netns exec nst ip link add hsr1 type hsr slave1 veth1 slave2 veth3 ip netns exec nst ip a a 192.168.100.2/24 dev hsr1 ip netns exec nst ip link set hsr1 up for i in {0..9} do for j in {0..9} do for k in {0..9} do for l in {0..9} do arping 192.168.100.2 -I hsr0 -s 00:01:3$i:4$j:5$k:6$l -c1 & done done done done Splat looks like: [ 236.066091][ T3286] list_add corruption. next->prev should be prev (ffff8880a5940300), but was ffff8880a5940d0. [ 236.069617][ T3286] ------------[ cut here ]------------ [ 236.070545][ T3286] kernel BUG at lib/list_debug.c:25! [ 236.071391][ T3286] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 236.072343][ T3286] CPU: 0 PID: 3286 Comm: arping Tainted: G W 5.5.0-rc1+ #209 [ 236.073463][ T3286] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 236.074695][ T3286] RIP: 0010:__list_add_valid+0x74/0xd0 [ 236.075499][ T3286] Code: 48 39 da 75 27 48 39 f5 74 36 48 39 dd 74 31 48 83 c4 08 b8 01 00 00 00 5b 5d c3 48 b [ 236.078277][ T3286] RSP: 0018:ffff8880aaa97648 EFLAGS: 00010286 [ 236.086991][ T3286] RAX: 0000000000000075 RBX: ffff8880d4624c20 RCX: 0000000000000000 [ 236.088000][ T3286] RDX: 0000000000000075 RSI: 0000000000000008 RDI: ffffed1015552ebf [ 236.098897][ T3286] RBP: ffff88809b53d200 R08: ffffed101b3c04f9 R09: ffffed101b3c04f9 [ 236.099960][ T3286] R10: 00000000308769a1 R11: ffffed101b3c04f8 R12: ffff8880d4624c28 [ 236.100974][ T3286] R13: ffff8880d4624c20 R14: 0000000040310100 R15: ffff8880ce17ee02 [ 236.138967][ T3286] FS: 00007f23479fa680(0000) GS:ffff8880d9c00000(0000) knlGS:0000000000000000 [ 236.144852][ T3286] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 236.145720][ T3286] CR2: 00007f4a14bab210 CR3: 00000000a61c6001 CR4: 00000000000606f0 [ 236.146776][ T3286] Call Trace: [ 236.147222][ T3286] hsr_add_node+0x314/0x490 [hsr] [ 236.153633][ T3286] hsr_forward_skb+0x2b6/0x1bc0 [hsr] [ 236.154362][ T3286] ? rcu_read_lock_sched_held+0x90/0xc0 [ 236.155091][ T3286] ? rcu_read_lock_bh_held+0xa0/0xa0 [ 236.156607][ T3286] hsr_dev_xmit+0x70/0xd0 [hsr] [ 236.157254][ T3286] dev_hard_start_xmit+0x160/0x740 [ 236.157941][ T3286] __dev_queue_xmit+0x1961/0x2e10 [ 236.158565][ T3286] ? netdev_core_pick_tx+0x2e0/0x2e0 [ ... ] Reported-by: syzbot+3924327f9ad5f4d2b343@syzkaller.appspotmail.com Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-22 11:26:54 +00:00
spinlock_t seqnr_lock; /* locking for sequence_nr */
spinlock_t list_lock; /* locking for node list */
struct hsr_proto_ops *proto_ops;
net: hsr: use hlist_head instead of list_head for mac addresses Currently, HSR manages mac addresses of known HSR nodes by using list_head. It takes a lot of time when there are a lot of registered nodes due to finding specific mac address nodes by using linear search. We can be reducing the time by using hlist. Thus, this patch moves list_head to hlist_head for mac addresses and this allows for further improvement of network performance. Condition: registered 10,000 known HSR nodes Before: # iperf3 -c 192.168.10.1 -i 1 -t 10 Connecting to host 192.168.10.1, port 5201 [ 5] local 192.168.10.2 port 59442 connected to 192.168.10.1 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.49 sec 3.75 MBytes 21.1 Mbits/sec 0 158 KBytes [ 5] 1.49-2.05 sec 1.25 MBytes 18.7 Mbits/sec 0 166 KBytes [ 5] 2.05-3.06 sec 2.44 MBytes 20.3 Mbits/sec 56 16.9 KBytes [ 5] 3.06-4.08 sec 1.43 MBytes 11.7 Mbits/sec 11 38.0 KBytes [ 5] 4.08-5.00 sec 951 KBytes 8.49 Mbits/sec 0 56.3 KBytes After: # iperf3 -c 192.168.10.1 -i 1 -t 10 Connecting to host 192.168.10.1, port 5201 [ 5] local 192.168.10.2 port 36460 connected to 192.168.10.1 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 7.39 MBytes 62.0 Mbits/sec 3 130 KBytes [ 5] 1.00-2.00 sec 5.06 MBytes 42.4 Mbits/sec 16 113 KBytes [ 5] 2.00-3.00 sec 8.58 MBytes 72.0 Mbits/sec 42 94.3 KBytes [ 5] 3.00-4.00 sec 7.44 MBytes 62.4 Mbits/sec 2 131 KBytes [ 5] 4.00-5.07 sec 8.13 MBytes 63.5 Mbits/sec 38 92.9 KBytes Signed-off-by: Juhee Kang <claudiajkang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-05 15:40:38 +00:00
u32 hash_buckets;
u32 hash_seed;
#define PRP_LAN_ID 0x5 /* 0x1010 for A and 0x1011 for B. Bit 0 is set
* based on SLAVE_A or SLAVE_B
*/
u8 net_id; /* for PRP, it occupies most significant 3 bits
* of lan_id
*/
unsigned char sup_multicast_addr[ETH_ALEN] __aligned(sizeof(u16));
/* Align to u16 boundary to avoid unaligned access
* in ether_addr_equal
*/
#ifdef CONFIG_DEBUG_FS
struct dentry *node_tbl_root;
#endif
};
#define hsr_for_each_port(hsr, port) \
list_for_each_entry_rcu((port), &(hsr)->ports, port_list)
struct hsr_port *hsr_port_get_hsr(struct hsr_priv *hsr, enum hsr_port_type pt);
/* Caller must ensure skb is a valid HSR frame */
static inline u16 hsr_get_skb_sequence_nr(struct sk_buff *skb)
{
struct hsr_ethhdr *hsr_ethhdr;
hsr_ethhdr = (struct hsr_ethhdr *)skb_mac_header(skb);
return ntohs(hsr_ethhdr->hsr_tag.sequence_nr);
}
static inline struct prp_rct *skb_get_PRP_rct(struct sk_buff *skb)
{
unsigned char *tail = skb_tail_pointer(skb) - HSR_HLEN;
struct prp_rct *rct = (struct prp_rct *)tail;
if (rct->PRP_suffix == htons(ETH_P_PRP))
return rct;
return NULL;
}
/* Assume caller has confirmed this skb is PRP suffixed */
static inline u16 prp_get_skb_sequence_nr(struct prp_rct *rct)
{
return ntohs(rct->sequence_nr);
}
/* assume there is a valid rct */
static inline bool prp_check_lsdu_size(struct sk_buff *skb,
struct prp_rct *rct,
bool is_sup)
{
struct ethhdr *ethhdr;
int expected_lsdu_size;
if (is_sup) {
expected_lsdu_size = HSR_V1_SUP_LSDUSIZE;
} else {
ethhdr = (struct ethhdr *)skb_mac_header(skb);
expected_lsdu_size = skb->len - 14;
if (ethhdr->h_proto == htons(ETH_P_8021Q))
expected_lsdu_size -= 4;
}
return (expected_lsdu_size == get_prp_LSDU_size(rct));
}
#if IS_ENABLED(CONFIG_DEBUG_FS)
void hsr_debugfs_rename(struct net_device *dev);
void hsr_debugfs_init(struct hsr_priv *priv, struct net_device *hsr_dev);
void hsr_debugfs_term(struct hsr_priv *priv);
void hsr_debugfs_create_root(void);
void hsr_debugfs_remove_root(void);
#else
static inline void hsr_debugfs_rename(struct net_device *dev)
{
}
static inline void hsr_debugfs_init(struct hsr_priv *priv,
struct net_device *hsr_dev)
{}
static inline void hsr_debugfs_term(struct hsr_priv *priv)
{}
static inline void hsr_debugfs_create_root(void)
{}
static inline void hsr_debugfs_remove_root(void)
{}
#endif
#endif /* __HSR_PRIVATE_H */