2011-08-30 23:41:05 +00:00
|
|
|
#include <linux/perf_event.h>
|
|
|
|
#include <linux/types.h>
|
|
|
|
|
|
|
|
#include <asm/perf_event.h>
|
|
|
|
#include <asm/msr.h>
|
2012-02-09 22:20:58 +00:00
|
|
|
#include <asm/insn.h>
|
2011-08-30 23:41:05 +00:00
|
|
|
|
|
|
|
#include "perf_event.h"
|
2010-03-03 11:02:30 +00:00
|
|
|
|
|
|
|
enum {
|
|
|
|
LBR_FORMAT_32 = 0x00,
|
|
|
|
LBR_FORMAT_LIP = 0x01,
|
|
|
|
LBR_FORMAT_EIP = 0x02,
|
|
|
|
LBR_FORMAT_EIP_FLAGS = 0x03,
|
|
|
|
};
|
|
|
|
|
2012-02-09 22:20:55 +00:00
|
|
|
/*
|
|
|
|
* Intel LBR_SELECT bits
|
|
|
|
* Intel Vol3a, April 2011, Section 16.7 Table 16-10
|
|
|
|
*
|
|
|
|
* Hardware branch filter (not available on all CPUs)
|
|
|
|
*/
|
|
|
|
#define LBR_KERNEL_BIT 0 /* do not capture at ring0 */
|
|
|
|
#define LBR_USER_BIT 1 /* do not capture at ring > 0 */
|
|
|
|
#define LBR_JCC_BIT 2 /* do not capture conditional branches */
|
|
|
|
#define LBR_REL_CALL_BIT 3 /* do not capture relative calls */
|
|
|
|
#define LBR_IND_CALL_BIT 4 /* do not capture indirect calls */
|
|
|
|
#define LBR_RETURN_BIT 5 /* do not capture near returns */
|
|
|
|
#define LBR_IND_JMP_BIT 6 /* do not capture indirect jumps */
|
|
|
|
#define LBR_REL_JMP_BIT 7 /* do not capture relative jumps */
|
|
|
|
#define LBR_FAR_BIT 8 /* do not capture far branches */
|
|
|
|
|
|
|
|
#define LBR_KERNEL (1 << LBR_KERNEL_BIT)
|
|
|
|
#define LBR_USER (1 << LBR_USER_BIT)
|
|
|
|
#define LBR_JCC (1 << LBR_JCC_BIT)
|
|
|
|
#define LBR_REL_CALL (1 << LBR_REL_CALL_BIT)
|
|
|
|
#define LBR_IND_CALL (1 << LBR_IND_CALL_BIT)
|
|
|
|
#define LBR_RETURN (1 << LBR_RETURN_BIT)
|
|
|
|
#define LBR_REL_JMP (1 << LBR_REL_JMP_BIT)
|
|
|
|
#define LBR_IND_JMP (1 << LBR_IND_JMP_BIT)
|
|
|
|
#define LBR_FAR (1 << LBR_FAR_BIT)
|
|
|
|
|
|
|
|
#define LBR_PLM (LBR_KERNEL | LBR_USER)
|
|
|
|
|
|
|
|
#define LBR_SEL_MASK 0x1ff /* valid bits in LBR_SELECT */
|
|
|
|
#define LBR_NOT_SUPP -1 /* LBR filter not supported */
|
|
|
|
#define LBR_IGN 0 /* ignored */
|
|
|
|
|
|
|
|
#define LBR_ANY \
|
|
|
|
(LBR_JCC |\
|
|
|
|
LBR_REL_CALL |\
|
|
|
|
LBR_IND_CALL |\
|
|
|
|
LBR_RETURN |\
|
|
|
|
LBR_REL_JMP |\
|
|
|
|
LBR_IND_JMP |\
|
|
|
|
LBR_FAR)
|
|
|
|
|
|
|
|
#define LBR_FROM_FLAG_MISPRED (1ULL << 63)
|
|
|
|
|
2012-02-09 22:20:57 +00:00
|
|
|
#define for_each_branch_sample_type(x) \
|
|
|
|
for ((x) = PERF_SAMPLE_BRANCH_USER; \
|
|
|
|
(x) < PERF_SAMPLE_BRANCH_MAX; (x) <<= 1)
|
|
|
|
|
2012-02-09 22:20:58 +00:00
|
|
|
/*
|
|
|
|
* x86control flow change classification
|
|
|
|
* x86control flow changes include branches, interrupts, traps, faults
|
|
|
|
*/
|
|
|
|
enum {
|
|
|
|
X86_BR_NONE = 0, /* unknown */
|
|
|
|
|
|
|
|
X86_BR_USER = 1 << 0, /* branch target is user */
|
|
|
|
X86_BR_KERNEL = 1 << 1, /* branch target is kernel */
|
|
|
|
|
|
|
|
X86_BR_CALL = 1 << 2, /* call */
|
|
|
|
X86_BR_RET = 1 << 3, /* return */
|
|
|
|
X86_BR_SYSCALL = 1 << 4, /* syscall */
|
|
|
|
X86_BR_SYSRET = 1 << 5, /* syscall return */
|
|
|
|
X86_BR_INT = 1 << 6, /* sw interrupt */
|
|
|
|
X86_BR_IRET = 1 << 7, /* return from interrupt */
|
|
|
|
X86_BR_JCC = 1 << 8, /* conditional */
|
|
|
|
X86_BR_JMP = 1 << 9, /* jump */
|
|
|
|
X86_BR_IRQ = 1 << 10,/* hw interrupt or trap or fault */
|
|
|
|
X86_BR_IND_CALL = 1 << 11,/* indirect calls */
|
|
|
|
};
|
|
|
|
|
|
|
|
#define X86_BR_PLM (X86_BR_USER | X86_BR_KERNEL)
|
|
|
|
|
|
|
|
#define X86_BR_ANY \
|
|
|
|
(X86_BR_CALL |\
|
|
|
|
X86_BR_RET |\
|
|
|
|
X86_BR_SYSCALL |\
|
|
|
|
X86_BR_SYSRET |\
|
|
|
|
X86_BR_INT |\
|
|
|
|
X86_BR_IRET |\
|
|
|
|
X86_BR_JCC |\
|
|
|
|
X86_BR_JMP |\
|
|
|
|
X86_BR_IRQ |\
|
|
|
|
X86_BR_IND_CALL)
|
|
|
|
|
|
|
|
#define X86_BR_ALL (X86_BR_PLM | X86_BR_ANY)
|
|
|
|
|
|
|
|
#define X86_BR_ANY_CALL \
|
|
|
|
(X86_BR_CALL |\
|
|
|
|
X86_BR_IND_CALL |\
|
|
|
|
X86_BR_SYSCALL |\
|
|
|
|
X86_BR_IRQ |\
|
|
|
|
X86_BR_INT)
|
|
|
|
|
|
|
|
static void intel_pmu_lbr_filter(struct cpu_hw_events *cpuc);
|
|
|
|
|
2010-03-03 11:02:30 +00:00
|
|
|
/*
|
|
|
|
* We only support LBR implementations that have FREEZE_LBRS_ON_PMI
|
|
|
|
* otherwise it becomes near impossible to get a reliable stack.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static void __intel_pmu_lbr_enable(void)
|
|
|
|
{
|
|
|
|
u64 debugctl;
|
2012-02-09 22:20:57 +00:00
|
|
|
struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
|
|
|
|
|
|
|
|
if (cpuc->lbr_sel)
|
|
|
|
wrmsrl(MSR_LBR_SELECT, cpuc->lbr_sel->config);
|
2010-03-03 11:02:30 +00:00
|
|
|
|
|
|
|
rdmsrl(MSR_IA32_DEBUGCTLMSR, debugctl);
|
2010-03-25 13:51:49 +00:00
|
|
|
debugctl |= (DEBUGCTLMSR_LBR | DEBUGCTLMSR_FREEZE_LBRS_ON_PMI);
|
2010-03-03 11:02:30 +00:00
|
|
|
wrmsrl(MSR_IA32_DEBUGCTLMSR, debugctl);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __intel_pmu_lbr_disable(void)
|
|
|
|
{
|
|
|
|
u64 debugctl;
|
|
|
|
|
|
|
|
rdmsrl(MSR_IA32_DEBUGCTLMSR, debugctl);
|
2010-03-25 13:51:49 +00:00
|
|
|
debugctl &= ~(DEBUGCTLMSR_LBR | DEBUGCTLMSR_FREEZE_LBRS_ON_PMI);
|
2010-03-03 11:02:30 +00:00
|
|
|
wrmsrl(MSR_IA32_DEBUGCTLMSR, debugctl);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void intel_pmu_lbr_reset_32(void)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < x86_pmu.lbr_nr; i++)
|
|
|
|
wrmsrl(x86_pmu.lbr_from + i, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void intel_pmu_lbr_reset_64(void)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < x86_pmu.lbr_nr; i++) {
|
|
|
|
wrmsrl(x86_pmu.lbr_from + i, 0);
|
|
|
|
wrmsrl(x86_pmu.lbr_to + i, 0);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2011-08-30 23:41:05 +00:00
|
|
|
void intel_pmu_lbr_reset(void)
|
2010-03-03 11:02:30 +00:00
|
|
|
{
|
2010-03-05 12:49:35 +00:00
|
|
|
if (!x86_pmu.lbr_nr)
|
|
|
|
return;
|
|
|
|
|
2010-03-03 16:07:40 +00:00
|
|
|
if (x86_pmu.intel_cap.lbr_format == LBR_FORMAT_32)
|
2010-03-03 11:02:30 +00:00
|
|
|
intel_pmu_lbr_reset_32();
|
|
|
|
else
|
|
|
|
intel_pmu_lbr_reset_64();
|
|
|
|
}
|
|
|
|
|
2011-08-30 23:41:05 +00:00
|
|
|
void intel_pmu_lbr_enable(struct perf_event *event)
|
2010-03-03 11:02:30 +00:00
|
|
|
{
|
|
|
|
struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
|
|
|
|
|
|
|
|
if (!x86_pmu.lbr_nr)
|
|
|
|
return;
|
|
|
|
|
|
|
|
/*
|
2010-03-08 12:51:12 +00:00
|
|
|
* Reset the LBR stack if we changed task context to
|
|
|
|
* avoid data leaks.
|
2010-03-03 11:02:30 +00:00
|
|
|
*/
|
2010-03-08 12:51:12 +00:00
|
|
|
if (event->ctx->task && cpuc->lbr_context != event->ctx) {
|
2010-03-03 11:02:30 +00:00
|
|
|
intel_pmu_lbr_reset();
|
|
|
|
cpuc->lbr_context = event->ctx;
|
|
|
|
}
|
2012-02-09 22:20:58 +00:00
|
|
|
cpuc->br_sel = event->hw.branch_reg.reg;
|
2010-03-03 11:02:30 +00:00
|
|
|
|
|
|
|
cpuc->lbr_users++;
|
|
|
|
}
|
|
|
|
|
2011-08-30 23:41:05 +00:00
|
|
|
void intel_pmu_lbr_disable(struct perf_event *event)
|
2010-03-03 11:02:30 +00:00
|
|
|
{
|
|
|
|
struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
|
|
|
|
|
|
|
|
if (!x86_pmu.lbr_nr)
|
|
|
|
return;
|
|
|
|
|
|
|
|
cpuc->lbr_users--;
|
2010-03-08 12:51:12 +00:00
|
|
|
WARN_ON_ONCE(cpuc->lbr_users < 0);
|
2010-03-06 12:48:54 +00:00
|
|
|
|
2012-02-09 22:20:57 +00:00
|
|
|
if (cpuc->enabled && !cpuc->lbr_users) {
|
2010-03-06 12:48:54 +00:00
|
|
|
__intel_pmu_lbr_disable();
|
2012-02-09 22:20:57 +00:00
|
|
|
/* avoid stale pointer */
|
|
|
|
cpuc->lbr_context = NULL;
|
|
|
|
}
|
2010-03-03 11:02:30 +00:00
|
|
|
}
|
|
|
|
|
2011-08-30 23:41:05 +00:00
|
|
|
void intel_pmu_lbr_enable_all(void)
|
2010-03-03 11:02:30 +00:00
|
|
|
{
|
|
|
|
struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
|
|
|
|
|
|
|
|
if (cpuc->lbr_users)
|
|
|
|
__intel_pmu_lbr_enable();
|
|
|
|
}
|
|
|
|
|
2011-08-30 23:41:05 +00:00
|
|
|
void intel_pmu_lbr_disable_all(void)
|
2010-03-03 11:02:30 +00:00
|
|
|
{
|
|
|
|
struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
|
|
|
|
|
|
|
|
if (cpuc->lbr_users)
|
|
|
|
__intel_pmu_lbr_disable();
|
|
|
|
}
|
|
|
|
|
2012-02-09 22:20:57 +00:00
|
|
|
/*
|
|
|
|
* TOS = most recently recorded branch
|
|
|
|
*/
|
2010-03-03 11:02:30 +00:00
|
|
|
static inline u64 intel_pmu_lbr_tos(void)
|
|
|
|
{
|
|
|
|
u64 tos;
|
|
|
|
|
|
|
|
rdmsrl(x86_pmu.lbr_tos, tos);
|
|
|
|
|
|
|
|
return tos;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void intel_pmu_lbr_read_32(struct cpu_hw_events *cpuc)
|
|
|
|
{
|
|
|
|
unsigned long mask = x86_pmu.lbr_nr - 1;
|
|
|
|
u64 tos = intel_pmu_lbr_tos();
|
|
|
|
int i;
|
|
|
|
|
2010-03-09 10:51:02 +00:00
|
|
|
for (i = 0; i < x86_pmu.lbr_nr; i++) {
|
2010-03-03 11:02:30 +00:00
|
|
|
unsigned long lbr_idx = (tos - i) & mask;
|
|
|
|
union {
|
|
|
|
struct {
|
|
|
|
u32 from;
|
|
|
|
u32 to;
|
|
|
|
};
|
|
|
|
u64 lbr;
|
|
|
|
} msr_lastbranch;
|
|
|
|
|
|
|
|
rdmsrl(x86_pmu.lbr_from + lbr_idx, msr_lastbranch.lbr);
|
|
|
|
|
perf: Add generic taken branch sampling support
This patch adds the ability to sample taken branches to the
perf_event interface.
The ability to capture taken branches is very useful for all
sorts of analysis. For instance, basic block profiling, call
counts, statistical call graph.
This new capability requires hardware assist and as such may
not be available on all HW platforms. On Intel x86 it is
implemented on top of the Last Branch Record (LBR) facility.
To enable taken branches sampling, the PERF_SAMPLE_BRANCH_STACK
bit must be set in attr->sample_type.
Sampled taken branches may be filtered by type and/or priv
levels.
The patch adds a new field, called branch_sample_type, to the
perf_event_attr structure. It contains a bitmask of filters
to apply to the sampled taken branches.
Filters may be implemented in HW. If the HW filter does not exist
or is not good enough, some arch may also implement a SW filter.
The following generic filters are currently defined:
- PERF_SAMPLE_USER
only branches whose targets are at the user level
- PERF_SAMPLE_KERNEL
only branches whose targets are at the kernel level
- PERF_SAMPLE_HV
only branches whose targets are at the hypervisor level
- PERF_SAMPLE_ANY
any type of branches (subject to priv levels filters)
- PERF_SAMPLE_ANY_CALL
any call branches (may incl. syscall on some arch)
- PERF_SAMPLE_ANY_RET
any return branches (may incl. syscall returns on some arch)
- PERF_SAMPLE_IND_CALL
indirect call branches
Obviously filter may be combined. The priv level bits are optional.
If not provided, the priv level of the associated event are used. It
is possible to collect branches at a priv level different from the
associated event. Use of kernel, hv priv levels is subject to permissions
and availability (hv).
The number of taken branch records present in each sample may vary based
on HW, the type of sampled branches, the executed code. Therefore
each sample contains the number of taken branches it contains.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1328826068-11713-2-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 22:20:51 +00:00
|
|
|
cpuc->lbr_entries[i].from = msr_lastbranch.from;
|
|
|
|
cpuc->lbr_entries[i].to = msr_lastbranch.to;
|
|
|
|
cpuc->lbr_entries[i].mispred = 0;
|
|
|
|
cpuc->lbr_entries[i].predicted = 0;
|
|
|
|
cpuc->lbr_entries[i].reserved = 0;
|
2010-03-03 11:02:30 +00:00
|
|
|
}
|
|
|
|
cpuc->lbr_stack.nr = i;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Due to lack of segmentation in Linux the effective address (offset)
|
|
|
|
* is the same as the linear address, allowing us to merge the LIP and EIP
|
|
|
|
* LBR formats.
|
|
|
|
*/
|
|
|
|
static void intel_pmu_lbr_read_64(struct cpu_hw_events *cpuc)
|
|
|
|
{
|
|
|
|
unsigned long mask = x86_pmu.lbr_nr - 1;
|
2010-03-03 16:07:40 +00:00
|
|
|
int lbr_format = x86_pmu.intel_cap.lbr_format;
|
2010-03-03 11:02:30 +00:00
|
|
|
u64 tos = intel_pmu_lbr_tos();
|
|
|
|
int i;
|
|
|
|
|
2010-03-09 10:51:02 +00:00
|
|
|
for (i = 0; i < x86_pmu.lbr_nr; i++) {
|
2010-03-03 11:02:30 +00:00
|
|
|
unsigned long lbr_idx = (tos - i) & mask;
|
perf: Add generic taken branch sampling support
This patch adds the ability to sample taken branches to the
perf_event interface.
The ability to capture taken branches is very useful for all
sorts of analysis. For instance, basic block profiling, call
counts, statistical call graph.
This new capability requires hardware assist and as such may
not be available on all HW platforms. On Intel x86 it is
implemented on top of the Last Branch Record (LBR) facility.
To enable taken branches sampling, the PERF_SAMPLE_BRANCH_STACK
bit must be set in attr->sample_type.
Sampled taken branches may be filtered by type and/or priv
levels.
The patch adds a new field, called branch_sample_type, to the
perf_event_attr structure. It contains a bitmask of filters
to apply to the sampled taken branches.
Filters may be implemented in HW. If the HW filter does not exist
or is not good enough, some arch may also implement a SW filter.
The following generic filters are currently defined:
- PERF_SAMPLE_USER
only branches whose targets are at the user level
- PERF_SAMPLE_KERNEL
only branches whose targets are at the kernel level
- PERF_SAMPLE_HV
only branches whose targets are at the hypervisor level
- PERF_SAMPLE_ANY
any type of branches (subject to priv levels filters)
- PERF_SAMPLE_ANY_CALL
any call branches (may incl. syscall on some arch)
- PERF_SAMPLE_ANY_RET
any return branches (may incl. syscall returns on some arch)
- PERF_SAMPLE_IND_CALL
indirect call branches
Obviously filter may be combined. The priv level bits are optional.
If not provided, the priv level of the associated event are used. It
is possible to collect branches at a priv level different from the
associated event. Use of kernel, hv priv levels is subject to permissions
and availability (hv).
The number of taken branch records present in each sample may vary based
on HW, the type of sampled branches, the executed code. Therefore
each sample contains the number of taken branches it contains.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1328826068-11713-2-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 22:20:51 +00:00
|
|
|
u64 from, to, mis = 0, pred = 0;
|
2010-03-03 11:02:30 +00:00
|
|
|
|
|
|
|
rdmsrl(x86_pmu.lbr_from + lbr_idx, from);
|
|
|
|
rdmsrl(x86_pmu.lbr_to + lbr_idx, to);
|
|
|
|
|
2010-03-03 16:07:40 +00:00
|
|
|
if (lbr_format == LBR_FORMAT_EIP_FLAGS) {
|
perf: Add generic taken branch sampling support
This patch adds the ability to sample taken branches to the
perf_event interface.
The ability to capture taken branches is very useful for all
sorts of analysis. For instance, basic block profiling, call
counts, statistical call graph.
This new capability requires hardware assist and as such may
not be available on all HW platforms. On Intel x86 it is
implemented on top of the Last Branch Record (LBR) facility.
To enable taken branches sampling, the PERF_SAMPLE_BRANCH_STACK
bit must be set in attr->sample_type.
Sampled taken branches may be filtered by type and/or priv
levels.
The patch adds a new field, called branch_sample_type, to the
perf_event_attr structure. It contains a bitmask of filters
to apply to the sampled taken branches.
Filters may be implemented in HW. If the HW filter does not exist
or is not good enough, some arch may also implement a SW filter.
The following generic filters are currently defined:
- PERF_SAMPLE_USER
only branches whose targets are at the user level
- PERF_SAMPLE_KERNEL
only branches whose targets are at the kernel level
- PERF_SAMPLE_HV
only branches whose targets are at the hypervisor level
- PERF_SAMPLE_ANY
any type of branches (subject to priv levels filters)
- PERF_SAMPLE_ANY_CALL
any call branches (may incl. syscall on some arch)
- PERF_SAMPLE_ANY_RET
any return branches (may incl. syscall returns on some arch)
- PERF_SAMPLE_IND_CALL
indirect call branches
Obviously filter may be combined. The priv level bits are optional.
If not provided, the priv level of the associated event are used. It
is possible to collect branches at a priv level different from the
associated event. Use of kernel, hv priv levels is subject to permissions
and availability (hv).
The number of taken branch records present in each sample may vary based
on HW, the type of sampled branches, the executed code. Therefore
each sample contains the number of taken branches it contains.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1328826068-11713-2-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 22:20:51 +00:00
|
|
|
mis = !!(from & LBR_FROM_FLAG_MISPRED);
|
|
|
|
pred = !mis;
|
2010-03-03 11:02:30 +00:00
|
|
|
from = (u64)((((s64)from) << 1) >> 1);
|
|
|
|
}
|
|
|
|
|
perf: Add generic taken branch sampling support
This patch adds the ability to sample taken branches to the
perf_event interface.
The ability to capture taken branches is very useful for all
sorts of analysis. For instance, basic block profiling, call
counts, statistical call graph.
This new capability requires hardware assist and as such may
not be available on all HW platforms. On Intel x86 it is
implemented on top of the Last Branch Record (LBR) facility.
To enable taken branches sampling, the PERF_SAMPLE_BRANCH_STACK
bit must be set in attr->sample_type.
Sampled taken branches may be filtered by type and/or priv
levels.
The patch adds a new field, called branch_sample_type, to the
perf_event_attr structure. It contains a bitmask of filters
to apply to the sampled taken branches.
Filters may be implemented in HW. If the HW filter does not exist
or is not good enough, some arch may also implement a SW filter.
The following generic filters are currently defined:
- PERF_SAMPLE_USER
only branches whose targets are at the user level
- PERF_SAMPLE_KERNEL
only branches whose targets are at the kernel level
- PERF_SAMPLE_HV
only branches whose targets are at the hypervisor level
- PERF_SAMPLE_ANY
any type of branches (subject to priv levels filters)
- PERF_SAMPLE_ANY_CALL
any call branches (may incl. syscall on some arch)
- PERF_SAMPLE_ANY_RET
any return branches (may incl. syscall returns on some arch)
- PERF_SAMPLE_IND_CALL
indirect call branches
Obviously filter may be combined. The priv level bits are optional.
If not provided, the priv level of the associated event are used. It
is possible to collect branches at a priv level different from the
associated event. Use of kernel, hv priv levels is subject to permissions
and availability (hv).
The number of taken branch records present in each sample may vary based
on HW, the type of sampled branches, the executed code. Therefore
each sample contains the number of taken branches it contains.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1328826068-11713-2-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 22:20:51 +00:00
|
|
|
cpuc->lbr_entries[i].from = from;
|
|
|
|
cpuc->lbr_entries[i].to = to;
|
|
|
|
cpuc->lbr_entries[i].mispred = mis;
|
|
|
|
cpuc->lbr_entries[i].predicted = pred;
|
|
|
|
cpuc->lbr_entries[i].reserved = 0;
|
2010-03-03 11:02:30 +00:00
|
|
|
}
|
|
|
|
cpuc->lbr_stack.nr = i;
|
|
|
|
}
|
|
|
|
|
2011-08-30 23:41:05 +00:00
|
|
|
void intel_pmu_lbr_read(void)
|
2010-03-03 11:02:30 +00:00
|
|
|
{
|
|
|
|
struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
|
|
|
|
|
|
|
|
if (!cpuc->lbr_users)
|
|
|
|
return;
|
|
|
|
|
2010-03-03 16:07:40 +00:00
|
|
|
if (x86_pmu.intel_cap.lbr_format == LBR_FORMAT_32)
|
2010-03-03 11:02:30 +00:00
|
|
|
intel_pmu_lbr_read_32(cpuc);
|
|
|
|
else
|
|
|
|
intel_pmu_lbr_read_64(cpuc);
|
2012-02-09 22:20:58 +00:00
|
|
|
|
|
|
|
intel_pmu_lbr_filter(cpuc);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* SW filter is used:
|
|
|
|
* - in case there is no HW filter
|
|
|
|
* - in case the HW filter has errata or limitations
|
|
|
|
*/
|
2013-05-21 10:53:37 +00:00
|
|
|
static void intel_pmu_setup_sw_lbr_filter(struct perf_event *event)
|
2012-02-09 22:20:58 +00:00
|
|
|
{
|
|
|
|
u64 br_type = event->attr.branch_sample_type;
|
|
|
|
int mask = 0;
|
|
|
|
|
|
|
|
if (br_type & PERF_SAMPLE_BRANCH_USER)
|
|
|
|
mask |= X86_BR_USER;
|
|
|
|
|
2013-05-21 10:53:37 +00:00
|
|
|
if (br_type & PERF_SAMPLE_BRANCH_KERNEL)
|
2012-02-09 22:20:58 +00:00
|
|
|
mask |= X86_BR_KERNEL;
|
|
|
|
|
|
|
|
/* we ignore BRANCH_HV here */
|
|
|
|
|
|
|
|
if (br_type & PERF_SAMPLE_BRANCH_ANY)
|
|
|
|
mask |= X86_BR_ANY;
|
|
|
|
|
|
|
|
if (br_type & PERF_SAMPLE_BRANCH_ANY_CALL)
|
|
|
|
mask |= X86_BR_ANY_CALL;
|
|
|
|
|
|
|
|
if (br_type & PERF_SAMPLE_BRANCH_ANY_RETURN)
|
|
|
|
mask |= X86_BR_RET | X86_BR_IRET | X86_BR_SYSRET;
|
|
|
|
|
|
|
|
if (br_type & PERF_SAMPLE_BRANCH_IND_CALL)
|
|
|
|
mask |= X86_BR_IND_CALL;
|
|
|
|
/*
|
|
|
|
* stash actual user request into reg, it may
|
|
|
|
* be used by fixup code for some CPU
|
|
|
|
*/
|
|
|
|
event->hw.branch_reg.reg = mask;
|
2010-03-03 11:02:30 +00:00
|
|
|
}
|
|
|
|
|
2012-02-09 22:20:57 +00:00
|
|
|
/*
|
|
|
|
* setup the HW LBR filter
|
|
|
|
* Used only when available, may not be enough to disambiguate
|
|
|
|
* all branches, may need the help of the SW filter
|
|
|
|
*/
|
|
|
|
static int intel_pmu_setup_hw_lbr_filter(struct perf_event *event)
|
|
|
|
{
|
|
|
|
struct hw_perf_event_extra *reg;
|
|
|
|
u64 br_type = event->attr.branch_sample_type;
|
|
|
|
u64 mask = 0, m;
|
|
|
|
u64 v;
|
|
|
|
|
|
|
|
for_each_branch_sample_type(m) {
|
|
|
|
if (!(br_type & m))
|
|
|
|
continue;
|
|
|
|
|
|
|
|
v = x86_pmu.lbr_sel_map[m];
|
|
|
|
if (v == LBR_NOT_SUPP)
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
|
2012-02-09 22:20:58 +00:00
|
|
|
if (v != LBR_IGN)
|
|
|
|
mask |= v;
|
2012-02-09 22:20:57 +00:00
|
|
|
}
|
|
|
|
reg = &event->hw.branch_reg;
|
|
|
|
reg->idx = EXTRA_REG_LBR;
|
|
|
|
|
|
|
|
/* LBR_SELECT operates in suppress mode so invert mask */
|
|
|
|
reg->config = ~mask & x86_pmu.lbr_sel_mask;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int intel_pmu_setup_lbr_filter(struct perf_event *event)
|
|
|
|
{
|
2012-02-09 22:20:58 +00:00
|
|
|
int ret = 0;
|
2012-02-09 22:20:57 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* no LBR on this PMU
|
|
|
|
*/
|
|
|
|
if (!x86_pmu.lbr_nr)
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
|
|
|
|
/*
|
2012-02-09 22:20:58 +00:00
|
|
|
* setup SW LBR filter
|
2012-02-09 22:20:57 +00:00
|
|
|
*/
|
2013-05-21 10:53:37 +00:00
|
|
|
intel_pmu_setup_sw_lbr_filter(event);
|
2012-02-09 22:20:58 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* setup HW LBR filter, if any
|
|
|
|
*/
|
|
|
|
if (x86_pmu.lbr_sel_map)
|
|
|
|
ret = intel_pmu_setup_hw_lbr_filter(event);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* return the type of control flow change at address "from"
|
|
|
|
* intruction is not necessarily a branch (in case of interrupt).
|
|
|
|
*
|
|
|
|
* The branch type returned also includes the priv level of the
|
|
|
|
* target of the control flow change (X86_BR_USER, X86_BR_KERNEL).
|
|
|
|
*
|
|
|
|
* If a branch type is unknown OR the instruction cannot be
|
|
|
|
* decoded (e.g., text page not present), then X86_BR_NONE is
|
|
|
|
* returned.
|
|
|
|
*/
|
|
|
|
static int branch_type(unsigned long from, unsigned long to)
|
|
|
|
{
|
|
|
|
struct insn insn;
|
|
|
|
void *addr;
|
|
|
|
int bytes, size = MAX_INSN_SIZE;
|
|
|
|
int ret = X86_BR_NONE;
|
|
|
|
int ext, to_plm, from_plm;
|
|
|
|
u8 buf[MAX_INSN_SIZE];
|
|
|
|
int is64 = 0;
|
|
|
|
|
|
|
|
to_plm = kernel_ip(to) ? X86_BR_KERNEL : X86_BR_USER;
|
|
|
|
from_plm = kernel_ip(from) ? X86_BR_KERNEL : X86_BR_USER;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* maybe zero if lbr did not fill up after a reset by the time
|
|
|
|
* we get a PMU interrupt
|
|
|
|
*/
|
|
|
|
if (from == 0 || to == 0)
|
|
|
|
return X86_BR_NONE;
|
|
|
|
|
|
|
|
if (from_plm == X86_BR_USER) {
|
|
|
|
/*
|
|
|
|
* can happen if measuring at the user level only
|
|
|
|
* and we interrupt in a kernel thread, e.g., idle.
|
|
|
|
*/
|
|
|
|
if (!current->mm)
|
|
|
|
return X86_BR_NONE;
|
|
|
|
|
|
|
|
/* may fail if text not present */
|
|
|
|
bytes = copy_from_user_nmi(buf, (void __user *)from, size);
|
|
|
|
if (bytes != size)
|
|
|
|
return X86_BR_NONE;
|
|
|
|
|
|
|
|
addr = buf;
|
2013-05-03 12:11:24 +00:00
|
|
|
} else {
|
|
|
|
/*
|
|
|
|
* The LBR logs any address in the IP, even if the IP just
|
|
|
|
* faulted. This means userspace can control the from address.
|
|
|
|
* Ensure we don't blindy read any address by validating it is
|
|
|
|
* a known text address.
|
|
|
|
*/
|
|
|
|
if (kernel_text_address(from))
|
|
|
|
addr = (void *)from;
|
|
|
|
else
|
|
|
|
return X86_BR_NONE;
|
|
|
|
}
|
2012-02-09 22:20:58 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* decoder needs to know the ABI especially
|
|
|
|
* on 64-bit systems running 32-bit apps
|
|
|
|
*/
|
|
|
|
#ifdef CONFIG_X86_64
|
|
|
|
is64 = kernel_ip((unsigned long)addr) || !test_thread_flag(TIF_IA32);
|
|
|
|
#endif
|
|
|
|
insn_init(&insn, addr, is64);
|
|
|
|
insn_get_opcode(&insn);
|
|
|
|
|
|
|
|
switch (insn.opcode.bytes[0]) {
|
|
|
|
case 0xf:
|
|
|
|
switch (insn.opcode.bytes[1]) {
|
|
|
|
case 0x05: /* syscall */
|
|
|
|
case 0x34: /* sysenter */
|
|
|
|
ret = X86_BR_SYSCALL;
|
|
|
|
break;
|
|
|
|
case 0x07: /* sysret */
|
|
|
|
case 0x35: /* sysexit */
|
|
|
|
ret = X86_BR_SYSRET;
|
|
|
|
break;
|
|
|
|
case 0x80 ... 0x8f: /* conditional */
|
|
|
|
ret = X86_BR_JCC;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
ret = X86_BR_NONE;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case 0x70 ... 0x7f: /* conditional */
|
|
|
|
ret = X86_BR_JCC;
|
|
|
|
break;
|
|
|
|
case 0xc2: /* near ret */
|
|
|
|
case 0xc3: /* near ret */
|
|
|
|
case 0xca: /* far ret */
|
|
|
|
case 0xcb: /* far ret */
|
|
|
|
ret = X86_BR_RET;
|
|
|
|
break;
|
|
|
|
case 0xcf: /* iret */
|
|
|
|
ret = X86_BR_IRET;
|
|
|
|
break;
|
|
|
|
case 0xcc ... 0xce: /* int */
|
|
|
|
ret = X86_BR_INT;
|
|
|
|
break;
|
|
|
|
case 0xe8: /* call near rel */
|
|
|
|
case 0x9a: /* call far absolute */
|
|
|
|
ret = X86_BR_CALL;
|
|
|
|
break;
|
|
|
|
case 0xe0 ... 0xe3: /* loop jmp */
|
|
|
|
ret = X86_BR_JCC;
|
|
|
|
break;
|
|
|
|
case 0xe9 ... 0xeb: /* jmp */
|
|
|
|
ret = X86_BR_JMP;
|
|
|
|
break;
|
|
|
|
case 0xff: /* call near absolute, call far absolute ind */
|
|
|
|
insn_get_modrm(&insn);
|
|
|
|
ext = (insn.modrm.bytes[0] >> 3) & 0x7;
|
|
|
|
switch (ext) {
|
|
|
|
case 2: /* near ind call */
|
|
|
|
case 3: /* far ind call */
|
|
|
|
ret = X86_BR_IND_CALL;
|
|
|
|
break;
|
|
|
|
case 4:
|
|
|
|
case 5:
|
|
|
|
ret = X86_BR_JMP;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
ret = X86_BR_NONE;
|
2012-02-09 22:20:57 +00:00
|
|
|
}
|
|
|
|
/*
|
2012-02-09 22:20:58 +00:00
|
|
|
* interrupts, traps, faults (and thus ring transition) may
|
|
|
|
* occur on any instructions. Thus, to classify them correctly,
|
|
|
|
* we need to first look at the from and to priv levels. If they
|
|
|
|
* are different and to is in the kernel, then it indicates
|
|
|
|
* a ring transition. If the from instruction is not a ring
|
|
|
|
* transition instr (syscall, systenter, int), then it means
|
|
|
|
* it was a irq, trap or fault.
|
|
|
|
*
|
|
|
|
* we have no way of detecting kernel to kernel faults.
|
|
|
|
*/
|
|
|
|
if (from_plm == X86_BR_USER && to_plm == X86_BR_KERNEL
|
|
|
|
&& ret != X86_BR_SYSCALL && ret != X86_BR_INT)
|
|
|
|
ret = X86_BR_IRQ;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* branch priv level determined by target as
|
|
|
|
* is done by HW when LBR_SELECT is implemented
|
2012-02-09 22:20:57 +00:00
|
|
|
*/
|
2012-02-09 22:20:58 +00:00
|
|
|
if (ret != X86_BR_NONE)
|
|
|
|
ret |= to_plm;
|
2012-02-09 22:20:57 +00:00
|
|
|
|
2012-02-09 22:20:58 +00:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* implement actual branch filter based on user demand.
|
|
|
|
* Hardware may not exactly satisfy that request, thus
|
|
|
|
* we need to inspect opcodes. Mismatched branches are
|
|
|
|
* discarded. Therefore, the number of branches returned
|
|
|
|
* in PERF_SAMPLE_BRANCH_STACK sample may vary.
|
|
|
|
*/
|
|
|
|
static void
|
|
|
|
intel_pmu_lbr_filter(struct cpu_hw_events *cpuc)
|
|
|
|
{
|
|
|
|
u64 from, to;
|
|
|
|
int br_sel = cpuc->br_sel;
|
|
|
|
int i, j, type;
|
|
|
|
bool compress = false;
|
|
|
|
|
|
|
|
/* if sampling all branches, then nothing to filter */
|
|
|
|
if ((br_sel & X86_BR_ALL) == X86_BR_ALL)
|
|
|
|
return;
|
|
|
|
|
|
|
|
for (i = 0; i < cpuc->lbr_stack.nr; i++) {
|
|
|
|
|
|
|
|
from = cpuc->lbr_entries[i].from;
|
|
|
|
to = cpuc->lbr_entries[i].to;
|
|
|
|
|
|
|
|
type = branch_type(from, to);
|
|
|
|
|
|
|
|
/* if type does not correspond, then discard */
|
|
|
|
if (type == X86_BR_NONE || (br_sel & type) != type) {
|
|
|
|
cpuc->lbr_entries[i].from = 0;
|
|
|
|
compress = true;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!compress)
|
|
|
|
return;
|
|
|
|
|
|
|
|
/* remove all entries with from=0 */
|
|
|
|
for (i = 0; i < cpuc->lbr_stack.nr; ) {
|
|
|
|
if (!cpuc->lbr_entries[i].from) {
|
|
|
|
j = i;
|
|
|
|
while (++j < cpuc->lbr_stack.nr)
|
|
|
|
cpuc->lbr_entries[j-1] = cpuc->lbr_entries[j];
|
|
|
|
cpuc->lbr_stack.nr--;
|
|
|
|
if (!cpuc->lbr_entries[i].from)
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
i++;
|
|
|
|
}
|
2012-02-09 22:20:57 +00:00
|
|
|
}
|
|
|
|
|
2012-02-09 22:20:55 +00:00
|
|
|
/*
|
|
|
|
* Map interface branch filters onto LBR filters
|
|
|
|
*/
|
|
|
|
static const int nhm_lbr_sel_map[PERF_SAMPLE_BRANCH_MAX] = {
|
|
|
|
[PERF_SAMPLE_BRANCH_ANY] = LBR_ANY,
|
|
|
|
[PERF_SAMPLE_BRANCH_USER] = LBR_USER,
|
|
|
|
[PERF_SAMPLE_BRANCH_KERNEL] = LBR_KERNEL,
|
|
|
|
[PERF_SAMPLE_BRANCH_HV] = LBR_IGN,
|
|
|
|
[PERF_SAMPLE_BRANCH_ANY_RETURN] = LBR_RETURN | LBR_REL_JMP
|
|
|
|
| LBR_IND_JMP | LBR_FAR,
|
|
|
|
/*
|
|
|
|
* NHM/WSM erratum: must include REL_JMP+IND_JMP to get CALL branches
|
|
|
|
*/
|
|
|
|
[PERF_SAMPLE_BRANCH_ANY_CALL] =
|
|
|
|
LBR_REL_CALL | LBR_IND_CALL | LBR_REL_JMP | LBR_IND_JMP | LBR_FAR,
|
|
|
|
/*
|
|
|
|
* NHM/WSM erratum: must include IND_JMP to capture IND_CALL
|
|
|
|
*/
|
|
|
|
[PERF_SAMPLE_BRANCH_IND_CALL] = LBR_IND_CALL | LBR_IND_JMP,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const int snb_lbr_sel_map[PERF_SAMPLE_BRANCH_MAX] = {
|
|
|
|
[PERF_SAMPLE_BRANCH_ANY] = LBR_ANY,
|
|
|
|
[PERF_SAMPLE_BRANCH_USER] = LBR_USER,
|
|
|
|
[PERF_SAMPLE_BRANCH_KERNEL] = LBR_KERNEL,
|
|
|
|
[PERF_SAMPLE_BRANCH_HV] = LBR_IGN,
|
|
|
|
[PERF_SAMPLE_BRANCH_ANY_RETURN] = LBR_RETURN | LBR_FAR,
|
|
|
|
[PERF_SAMPLE_BRANCH_ANY_CALL] = LBR_REL_CALL | LBR_IND_CALL
|
|
|
|
| LBR_FAR,
|
|
|
|
[PERF_SAMPLE_BRANCH_IND_CALL] = LBR_IND_CALL,
|
|
|
|
};
|
|
|
|
|
|
|
|
/* core */
|
2011-08-30 23:41:05 +00:00
|
|
|
void intel_pmu_lbr_init_core(void)
|
2010-03-03 11:02:30 +00:00
|
|
|
{
|
|
|
|
x86_pmu.lbr_nr = 4;
|
2012-02-09 22:20:52 +00:00
|
|
|
x86_pmu.lbr_tos = MSR_LBR_TOS;
|
|
|
|
x86_pmu.lbr_from = MSR_LBR_CORE_FROM;
|
|
|
|
x86_pmu.lbr_to = MSR_LBR_CORE_TO;
|
2012-02-09 22:20:55 +00:00
|
|
|
|
2012-02-09 22:20:58 +00:00
|
|
|
/*
|
|
|
|
* SW branch filter usage:
|
|
|
|
* - compensate for lack of HW filter
|
|
|
|
*/
|
2012-02-09 22:20:55 +00:00
|
|
|
pr_cont("4-deep LBR, ");
|
2010-03-03 11:02:30 +00:00
|
|
|
}
|
|
|
|
|
2012-02-09 22:20:55 +00:00
|
|
|
/* nehalem/westmere */
|
2011-08-30 23:41:05 +00:00
|
|
|
void intel_pmu_lbr_init_nhm(void)
|
2010-03-03 11:02:30 +00:00
|
|
|
{
|
|
|
|
x86_pmu.lbr_nr = 16;
|
2012-02-09 22:20:52 +00:00
|
|
|
x86_pmu.lbr_tos = MSR_LBR_TOS;
|
|
|
|
x86_pmu.lbr_from = MSR_LBR_NHM_FROM;
|
|
|
|
x86_pmu.lbr_to = MSR_LBR_NHM_TO;
|
2012-02-09 22:20:55 +00:00
|
|
|
|
|
|
|
x86_pmu.lbr_sel_mask = LBR_SEL_MASK;
|
|
|
|
x86_pmu.lbr_sel_map = nhm_lbr_sel_map;
|
|
|
|
|
2012-02-09 22:20:58 +00:00
|
|
|
/*
|
|
|
|
* SW branch filter usage:
|
|
|
|
* - workaround LBR_SEL errata (see above)
|
|
|
|
* - support syscall, sysret capture.
|
|
|
|
* That requires LBR_FAR but that means far
|
|
|
|
* jmp need to be filtered out
|
|
|
|
*/
|
2012-02-09 22:20:55 +00:00
|
|
|
pr_cont("16-deep LBR, ");
|
2010-03-03 11:02:30 +00:00
|
|
|
}
|
|
|
|
|
2012-02-09 22:20:55 +00:00
|
|
|
/* sandy bridge */
|
|
|
|
void intel_pmu_lbr_init_snb(void)
|
|
|
|
{
|
|
|
|
x86_pmu.lbr_nr = 16;
|
|
|
|
x86_pmu.lbr_tos = MSR_LBR_TOS;
|
|
|
|
x86_pmu.lbr_from = MSR_LBR_NHM_FROM;
|
|
|
|
x86_pmu.lbr_to = MSR_LBR_NHM_TO;
|
|
|
|
|
|
|
|
x86_pmu.lbr_sel_mask = LBR_SEL_MASK;
|
|
|
|
x86_pmu.lbr_sel_map = snb_lbr_sel_map;
|
|
|
|
|
2012-02-09 22:20:58 +00:00
|
|
|
/*
|
|
|
|
* SW branch filter usage:
|
|
|
|
* - support syscall, sysret capture.
|
|
|
|
* That requires LBR_FAR but that means far
|
|
|
|
* jmp need to be filtered out
|
|
|
|
*/
|
2012-02-09 22:20:55 +00:00
|
|
|
pr_cont("16-deep LBR, ");
|
|
|
|
}
|
|
|
|
|
|
|
|
/* atom */
|
2011-08-30 23:41:05 +00:00
|
|
|
void intel_pmu_lbr_init_atom(void)
|
2010-03-03 11:02:30 +00:00
|
|
|
{
|
2012-02-09 22:20:56 +00:00
|
|
|
/*
|
|
|
|
* only models starting at stepping 10 seems
|
|
|
|
* to have an operational LBR which can freeze
|
|
|
|
* on PMU interrupt
|
|
|
|
*/
|
2012-08-20 09:24:21 +00:00
|
|
|
if (boot_cpu_data.x86_model == 28
|
|
|
|
&& boot_cpu_data.x86_mask < 10) {
|
2012-02-09 22:20:56 +00:00
|
|
|
pr_cont("LBR disabled due to erratum");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2010-03-03 11:02:30 +00:00
|
|
|
x86_pmu.lbr_nr = 8;
|
2012-02-09 22:20:52 +00:00
|
|
|
x86_pmu.lbr_tos = MSR_LBR_TOS;
|
|
|
|
x86_pmu.lbr_from = MSR_LBR_CORE_FROM;
|
|
|
|
x86_pmu.lbr_to = MSR_LBR_CORE_TO;
|
2012-02-09 22:20:55 +00:00
|
|
|
|
2012-02-09 22:20:58 +00:00
|
|
|
/*
|
|
|
|
* SW branch filter usage:
|
|
|
|
* - compensate for lack of HW filter
|
|
|
|
*/
|
2012-02-09 22:20:55 +00:00
|
|
|
pr_cont("8-deep LBR, ");
|
2010-03-03 11:02:30 +00:00
|
|
|
}
|