linux-stable/arch/blackfin/kernel/fixed_code.S

/*
 * This file contains sequences of code that will be copied to a
 * fixed location, defined in <asm/fixed_code.h>.  The interrupt
 * handlers ensure that these sequences appear to be atomic when
 * executed from userspace.
 * These are aligned to 16 bytes, so that we have some space to replace
 * these sequences with something else (e.g. kernel traps if we ever do
 * BF561 SMP).
 *
 * Copyright 2007-2008 Analog Devices Inc.
 *
 * Licensed under the GPL-2 or later.
 */

#include <linux/linkage.h>
#include <linux/init.h>
#include <linux/unistd.h>
#include <asm/entry.h>

__INIT

ENTRY(_fixed_code_start)

.align 16
ENTRY(_sigreturn_stub)
	P0 = __NR_rt_sigreturn;
	EXCPT 0;
	/* Speculative execution paranoia.  */
0:	JUMP.S 0b;
ENDPROC (_sigreturn_stub)

.align 16
	/*
	 * Atomic swap, 8 bit.
	 * Inputs:	P0: memory address to use
	 *		R1: value to store
	 * Output:	R0: old contents of the memory address, zero extended.
	 */
ENTRY(_atomic_xchg32)
	R0 = [P0];
	[P0] = R1;
	rts;
ENDPROC (_atomic_xchg32)

.align 16
	/*
	 * Compare and swap, 32 bit.
	 * Inputs:	P0: memory address to use
	 *		R1: compare value
	 *		R2: new value to store
	 * The new value is stored if the contents of the memory
	 * address is equal to the compare value.
	 * Output:	R0: old contents of the memory address.
	 */
ENTRY(_atomic_cas32)
	R0 = [P0];
	CC = R0 == R1;
	IF !CC JUMP 1f;
	[P0] = R2;
1:
	rts;
ENDPROC (_atomic_cas32)

.align 16
	/*
	 * Atomic add, 32 bit.
	 * Inputs:	P0: memory address to use
	 *		R0: value to add
	 * Outputs:	R0: new contents of the memory address.
	 *		R1: previous contents of the memory address.
	 */
ENTRY(_atomic_add32)
	R1 = [P0];
	R0 = R1 + R0;
	[P0] = R0;
	rts;
ENDPROC (_atomic_add32)

.align 16
	/*
	 * Atomic sub, 32 bit.
	 * Inputs:	P0: memory address to use
	 *		R0: value to subtract
	 * Outputs:	R0: new contents of the memory address.
	 *		R1: previous contents of the memory address.
	 */
ENTRY(_atomic_sub32)
	R1 = [P0];
	R0 = R1 - R0;
	[P0] = R0;
	rts;
ENDPROC (_atomic_sub32)

.align 16
	/*
	 * Atomic ior, 32 bit.
	 * Inputs:	P0: memory address to use
	 *		R0: value to ior
	 * Outputs:	R0: new contents of the memory address.
	 *		R1: previous contents of the memory address.
	 */
ENTRY(_atomic_ior32)
	R1 = [P0];
	R0 = R1 | R0;
	[P0] = R0;
	rts;
ENDPROC (_atomic_ior32)

.align 16
	/*
	 * Atomic and, 32 bit.
	 * Inputs:	P0: memory address to use
	 *		R0: value to and
	 * Outputs:	R0: new contents of the memory address.
	 *		R1: previous contents of the memory address.
	 */
ENTRY(_atomic_and32)
	R1 = [P0];
	R0 = R1 & R0;
	[P0] = R0;
	rts;
ENDPROC (_atomic_and32)

.align 16
	/*
	 * Atomic xor, 32 bit.
	 * Inputs:	P0: memory address to use
	 *		R0: value to xor
	 * Outputs:	R0: new contents of the memory address.
	 *		R1: previous contents of the memory address.
	 */
ENTRY(_atomic_xor32)
	R1 = [P0];
	R0 = R1 ^ R0;
	[P0] = R0;
	rts;
ENDPROC (_atomic_xor32)

.align 16
	/*
	 * safe_user_instruction
	 * Four NOPS are enough to allow the pipeline to speculativily load
	 * execute anything it wants. After that, things have gone bad, and
	 * we are stuck - so panic. Since we might be in user space, we can't
	 * call panic, so just cause a unhandled exception, this should cause
	 * a dump of the trace buffer so we can tell were we are, and a reboot
	 */
ENTRY(_safe_user_instruction)
	NOP; NOP; NOP; NOP;
	EXCPT 0x4;
ENDPROC(_safe_user_instruction)

ENTRY(_fixed_code_end)

__FINIT