mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-23 09:19:51 +00:00
1187 lines
26 KiB
C
1187 lines
26 KiB
C
![]() |
// SPDX-License-Identifier: GPL-2.0
|
||
|
/*
|
||
|
* Omnivision OV2680 CMOS Image Sensor driver
|
||
|
*
|
||
|
* Copyright (C) 2018 Linaro Ltd
|
||
|
*
|
||
|
* Based on OV5640 Sensor Driver
|
||
|
* Copyright (C) 2011-2013 Freescale Semiconductor, Inc. All Rights Reserved.
|
||
|
* Copyright (C) 2014-2017 Mentor Graphics Inc.
|
||
|
*
|
||
|
*/
|
||
|
|
||
|
#include <asm/unaligned.h>
|
||
|
#include <linux/clk.h>
|
||
|
#include <linux/delay.h>
|
||
|
#include <linux/err.h>
|
||
|
#include <linux/i2c.h>
|
||
|
#include <linux/init.h>
|
||
|
#include <linux/module.h>
|
||
|
#include <linux/of_device.h>
|
||
|
#include <linux/gpio/consumer.h>
|
||
|
#include <linux/regulator/consumer.h>
|
||
|
|
||
|
#include <media/v4l2-common.h>
|
||
|
#include <media/v4l2-ctrls.h>
|
||
|
#include <media/v4l2-subdev.h>
|
||
|
|
||
|
#define OV2680_XVCLK_VALUE 24000000
|
||
|
|
||
|
#define OV2680_CHIP_ID 0x2680
|
||
|
|
||
|
#define OV2680_REG_STREAM_CTRL 0x0100
|
||
|
#define OV2680_REG_SOFT_RESET 0x0103
|
||
|
|
||
|
#define OV2680_REG_CHIP_ID_HIGH 0x300a
|
||
|
#define OV2680_REG_CHIP_ID_LOW 0x300b
|
||
|
|
||
|
#define OV2680_REG_R_MANUAL 0x3503
|
||
|
#define OV2680_REG_GAIN_PK 0x350a
|
||
|
#define OV2680_REG_EXPOSURE_PK_HIGH 0x3500
|
||
|
#define OV2680_REG_TIMING_HTS 0x380c
|
||
|
#define OV2680_REG_TIMING_VTS 0x380e
|
||
|
#define OV2680_REG_FORMAT1 0x3820
|
||
|
#define OV2680_REG_FORMAT2 0x3821
|
||
|
|
||
|
#define OV2680_REG_ISP_CTRL00 0x5080
|
||
|
|
||
|
#define OV2680_FRAME_RATE 30
|
||
|
|
||
|
#define OV2680_REG_VALUE_8BIT 1
|
||
|
#define OV2680_REG_VALUE_16BIT 2
|
||
|
#define OV2680_REG_VALUE_24BIT 3
|
||
|
|
||
|
#define OV2680_WIDTH_MAX 1600
|
||
|
#define OV2680_HEIGHT_MAX 1200
|
||
|
|
||
|
enum ov2680_mode_id {
|
||
|
OV2680_MODE_QUXGA_800_600,
|
||
|
OV2680_MODE_720P_1280_720,
|
||
|
OV2680_MODE_UXGA_1600_1200,
|
||
|
OV2680_MODE_MAX,
|
||
|
};
|
||
|
|
||
|
struct reg_value {
|
||
|
u16 reg_addr;
|
||
|
u8 val;
|
||
|
};
|
||
|
|
||
|
static const char * const ov2680_supply_name[] = {
|
||
|
"DOVDD",
|
||
|
"DVDD",
|
||
|
"AVDD",
|
||
|
};
|
||
|
|
||
|
#define OV2680_NUM_SUPPLIES ARRAY_SIZE(ov2680_supply_name)
|
||
|
|
||
|
struct ov2680_mode_info {
|
||
|
const char *name;
|
||
|
enum ov2680_mode_id id;
|
||
|
u32 width;
|
||
|
u32 height;
|
||
|
const struct reg_value *reg_data;
|
||
|
u32 reg_data_size;
|
||
|
};
|
||
|
|
||
|
struct ov2680_ctrls {
|
||
|
struct v4l2_ctrl_handler handler;
|
||
|
struct {
|
||
|
struct v4l2_ctrl *auto_exp;
|
||
|
struct v4l2_ctrl *exposure;
|
||
|
};
|
||
|
struct {
|
||
|
struct v4l2_ctrl *auto_gain;
|
||
|
struct v4l2_ctrl *gain;
|
||
|
};
|
||
|
|
||
|
struct v4l2_ctrl *hflip;
|
||
|
struct v4l2_ctrl *vflip;
|
||
|
struct v4l2_ctrl *test_pattern;
|
||
|
};
|
||
|
|
||
|
struct ov2680_dev {
|
||
|
struct i2c_client *i2c_client;
|
||
|
struct v4l2_subdev sd;
|
||
|
|
||
|
struct media_pad pad;
|
||
|
struct clk *xvclk;
|
||
|
u32 xvclk_freq;
|
||
|
struct regulator_bulk_data supplies[OV2680_NUM_SUPPLIES];
|
||
|
|
||
|
struct gpio_desc *reset_gpio;
|
||
|
struct mutex lock; /* protect members */
|
||
|
|
||
|
bool mode_pending_changes;
|
||
|
bool is_enabled;
|
||
|
bool is_streaming;
|
||
|
|
||
|
struct ov2680_ctrls ctrls;
|
||
|
struct v4l2_mbus_framefmt fmt;
|
||
|
struct v4l2_fract frame_interval;
|
||
|
|
||
|
const struct ov2680_mode_info *current_mode;
|
||
|
};
|
||
|
|
||
|
static const char * const test_pattern_menu[] = {
|
||
|
"Disabled",
|
||
|
"Color Bars",
|
||
|
"Random Data",
|
||
|
"Square",
|
||
|
"Black Image",
|
||
|
};
|
||
|
|
||
|
static const int ov2680_hv_flip_bayer_order[] = {
|
||
|
MEDIA_BUS_FMT_SBGGR10_1X10,
|
||
|
MEDIA_BUS_FMT_SGRBG10_1X10,
|
||
|
MEDIA_BUS_FMT_SGBRG10_1X10,
|
||
|
MEDIA_BUS_FMT_SRGGB10_1X10,
|
||
|
};
|
||
|
|
||
|
static const struct reg_value ov2680_setting_30fps_QUXGA_800_600[] = {
|
||
|
{0x3086, 0x01}, {0x370a, 0x23}, {0x3808, 0x03}, {0x3809, 0x20},
|
||
|
{0x380a, 0x02}, {0x380b, 0x58}, {0x380c, 0x06}, {0x380d, 0xac},
|
||
|
{0x380e, 0x02}, {0x380f, 0x84}, {0x3811, 0x04}, {0x3813, 0x04},
|
||
|
{0x3814, 0x31}, {0x3815, 0x31}, {0x3820, 0xc0}, {0x4008, 0x00},
|
||
|
{0x4009, 0x03}, {0x4837, 0x1e}, {0x3501, 0x4e}, {0x3502, 0xe0},
|
||
|
};
|
||
|
|
||
|
static const struct reg_value ov2680_setting_30fps_720P_1280_720[] = {
|
||
|
{0x3086, 0x00}, {0x3808, 0x05}, {0x3809, 0x00}, {0x380a, 0x02},
|
||
|
{0x380b, 0xd0}, {0x380c, 0x06}, {0x380d, 0xa8}, {0x380e, 0x05},
|
||
|
{0x380f, 0x0e}, {0x3811, 0x08}, {0x3813, 0x06}, {0x3814, 0x11},
|
||
|
{0x3815, 0x11}, {0x3820, 0xc0}, {0x4008, 0x00},
|
||
|
};
|
||
|
|
||
|
static const struct reg_value ov2680_setting_30fps_UXGA_1600_1200[] = {
|
||
|
{0x3086, 0x00}, {0x3501, 0x4e}, {0x3502, 0xe0}, {0x3808, 0x06},
|
||
|
{0x3809, 0x40}, {0x380a, 0x04}, {0x380b, 0xb0}, {0x380c, 0x06},
|
||
|
{0x380d, 0xa8}, {0x380e, 0x05}, {0x380f, 0x0e}, {0x3811, 0x00},
|
||
|
{0x3813, 0x00}, {0x3814, 0x11}, {0x3815, 0x11}, {0x3820, 0xc0},
|
||
|
{0x4008, 0x00}, {0x4837, 0x18}
|
||
|
};
|
||
|
|
||
|
static const struct ov2680_mode_info ov2680_mode_init_data = {
|
||
|
"mode_quxga_800_600", OV2680_MODE_QUXGA_800_600, 800, 600,
|
||
|
ov2680_setting_30fps_QUXGA_800_600,
|
||
|
ARRAY_SIZE(ov2680_setting_30fps_QUXGA_800_600),
|
||
|
};
|
||
|
|
||
|
static const struct ov2680_mode_info ov2680_mode_data[OV2680_MODE_MAX] = {
|
||
|
{"mode_quxga_800_600", OV2680_MODE_QUXGA_800_600,
|
||
|
800, 600, ov2680_setting_30fps_QUXGA_800_600,
|
||
|
ARRAY_SIZE(ov2680_setting_30fps_QUXGA_800_600)},
|
||
|
{"mode_720p_1280_720", OV2680_MODE_720P_1280_720,
|
||
|
1280, 720, ov2680_setting_30fps_720P_1280_720,
|
||
|
ARRAY_SIZE(ov2680_setting_30fps_720P_1280_720)},
|
||
|
{"mode_uxga_1600_1200", OV2680_MODE_UXGA_1600_1200,
|
||
|
1600, 1200, ov2680_setting_30fps_UXGA_1600_1200,
|
||
|
ARRAY_SIZE(ov2680_setting_30fps_UXGA_1600_1200)},
|
||
|
};
|
||
|
|
||
|
static struct ov2680_dev *to_ov2680_dev(struct v4l2_subdev *sd)
|
||
|
{
|
||
|
return container_of(sd, struct ov2680_dev, sd);
|
||
|
}
|
||
|
|
||
|
static struct device *ov2680_to_dev(struct ov2680_dev *sensor)
|
||
|
{
|
||
|
return &sensor->i2c_client->dev;
|
||
|
}
|
||
|
|
||
|
static inline struct v4l2_subdev *ctrl_to_sd(struct v4l2_ctrl *ctrl)
|
||
|
{
|
||
|
return &container_of(ctrl->handler, struct ov2680_dev,
|
||
|
ctrls.handler)->sd;
|
||
|
}
|
||
|
|
||
|
static int __ov2680_write_reg(struct ov2680_dev *sensor, u16 reg,
|
||
|
unsigned int len, u32 val)
|
||
|
{
|
||
|
struct i2c_client *client = sensor->i2c_client;
|
||
|
u8 buf[6];
|
||
|
int ret;
|
||
|
|
||
|
if (len > 4)
|
||
|
return -EINVAL;
|
||
|
|
||
|
put_unaligned_be16(reg, buf);
|
||
|
put_unaligned_be32(val << (8 * (4 - len)), buf + 2);
|
||
|
ret = i2c_master_send(client, buf, len + 2);
|
||
|
if (ret != len + 2) {
|
||
|
dev_err(&client->dev, "write error: reg=0x%4x: %d\n", reg, ret);
|
||
|
return -EIO;
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
#define ov2680_write_reg(s, r, v) \
|
||
|
__ov2680_write_reg(s, r, OV2680_REG_VALUE_8BIT, v)
|
||
|
|
||
|
#define ov2680_write_reg16(s, r, v) \
|
||
|
__ov2680_write_reg(s, r, OV2680_REG_VALUE_16BIT, v)
|
||
|
|
||
|
#define ov2680_write_reg24(s, r, v) \
|
||
|
__ov2680_write_reg(s, r, OV2680_REG_VALUE_24BIT, v)
|
||
|
|
||
|
static int __ov2680_read_reg(struct ov2680_dev *sensor, u16 reg,
|
||
|
unsigned int len, u32 *val)
|
||
|
{
|
||
|
struct i2c_client *client = sensor->i2c_client;
|
||
|
struct i2c_msg msgs[2];
|
||
|
u8 addr_buf[2] = { reg >> 8, reg & 0xff };
|
||
|
u8 data_buf[4] = { 0, };
|
||
|
int ret;
|
||
|
|
||
|
if (len > 4)
|
||
|
return -EINVAL;
|
||
|
|
||
|
msgs[0].addr = client->addr;
|
||
|
msgs[0].flags = 0;
|
||
|
msgs[0].len = ARRAY_SIZE(addr_buf);
|
||
|
msgs[0].buf = addr_buf;
|
||
|
|
||
|
msgs[1].addr = client->addr;
|
||
|
msgs[1].flags = I2C_M_RD;
|
||
|
msgs[1].len = len;
|
||
|
msgs[1].buf = &data_buf[4 - len];
|
||
|
|
||
|
ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
|
||
|
if (ret != ARRAY_SIZE(msgs)) {
|
||
|
dev_err(&client->dev, "read error: reg=0x%4x: %d\n", reg, ret);
|
||
|
return -EIO;
|
||
|
}
|
||
|
|
||
|
*val = get_unaligned_be32(data_buf);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
#define ov2680_read_reg(s, r, v) \
|
||
|
__ov2680_read_reg(s, r, OV2680_REG_VALUE_8BIT, v)
|
||
|
|
||
|
#define ov2680_read_reg16(s, r, v) \
|
||
|
__ov2680_read_reg(s, r, OV2680_REG_VALUE_16BIT, v)
|
||
|
|
||
|
#define ov2680_read_reg24(s, r, v) \
|
||
|
__ov2680_read_reg(s, r, OV2680_REG_VALUE_24BIT, v)
|
||
|
|
||
|
static int ov2680_mod_reg(struct ov2680_dev *sensor, u16 reg, u8 mask, u8 val)
|
||
|
{
|
||
|
u32 readval;
|
||
|
int ret;
|
||
|
|
||
|
ret = ov2680_read_reg(sensor, reg, &readval);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
readval &= ~mask;
|
||
|
val &= mask;
|
||
|
val |= readval;
|
||
|
|
||
|
return ov2680_write_reg(sensor, reg, val);
|
||
|
}
|
||
|
|
||
|
static int ov2680_load_regs(struct ov2680_dev *sensor,
|
||
|
const struct ov2680_mode_info *mode)
|
||
|
{
|
||
|
const struct reg_value *regs = mode->reg_data;
|
||
|
unsigned int i;
|
||
|
int ret = 0;
|
||
|
u16 reg_addr;
|
||
|
u8 val;
|
||
|
|
||
|
for (i = 0; i < mode->reg_data_size; ++i, ++regs) {
|
||
|
reg_addr = regs->reg_addr;
|
||
|
val = regs->val;
|
||
|
|
||
|
ret = ov2680_write_reg(sensor, reg_addr, val);
|
||
|
if (ret)
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static void ov2680_power_up(struct ov2680_dev *sensor)
|
||
|
{
|
||
|
if (!sensor->reset_gpio)
|
||
|
return;
|
||
|
|
||
|
gpiod_set_value(sensor->reset_gpio, 0);
|
||
|
usleep_range(5000, 10000);
|
||
|
}
|
||
|
|
||
|
static void ov2680_power_down(struct ov2680_dev *sensor)
|
||
|
{
|
||
|
if (!sensor->reset_gpio)
|
||
|
return;
|
||
|
|
||
|
gpiod_set_value(sensor->reset_gpio, 1);
|
||
|
usleep_range(5000, 10000);
|
||
|
}
|
||
|
|
||
|
static int ov2680_bayer_order(struct ov2680_dev *sensor)
|
||
|
{
|
||
|
u32 format1;
|
||
|
u32 format2;
|
||
|
u32 hv_flip;
|
||
|
int ret;
|
||
|
|
||
|
ret = ov2680_read_reg(sensor, OV2680_REG_FORMAT1, &format1);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
ret = ov2680_read_reg(sensor, OV2680_REG_FORMAT2, &format2);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
hv_flip = (format2 & BIT(2) << 1) | (format1 & BIT(2));
|
||
|
|
||
|
sensor->fmt.code = ov2680_hv_flip_bayer_order[hv_flip];
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int ov2680_vflip_enable(struct ov2680_dev *sensor)
|
||
|
{
|
||
|
int ret;
|
||
|
|
||
|
ret = ov2680_mod_reg(sensor, OV2680_REG_FORMAT1, BIT(2), BIT(2));
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
return ov2680_bayer_order(sensor);
|
||
|
}
|
||
|
|
||
|
static int ov2680_vflip_disable(struct ov2680_dev *sensor)
|
||
|
{
|
||
|
int ret;
|
||
|
|
||
|
ret = ov2680_mod_reg(sensor, OV2680_REG_FORMAT1, BIT(2), BIT(0));
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
return ov2680_bayer_order(sensor);
|
||
|
}
|
||
|
|
||
|
static int ov2680_hflip_enable(struct ov2680_dev *sensor)
|
||
|
{
|
||
|
int ret;
|
||
|
|
||
|
ret = ov2680_mod_reg(sensor, OV2680_REG_FORMAT2, BIT(2), BIT(2));
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
return ov2680_bayer_order(sensor);
|
||
|
}
|
||
|
|
||
|
static int ov2680_hflip_disable(struct ov2680_dev *sensor)
|
||
|
{
|
||
|
int ret;
|
||
|
|
||
|
ret = ov2680_mod_reg(sensor, OV2680_REG_FORMAT2, BIT(2), BIT(0));
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
return ov2680_bayer_order(sensor);
|
||
|
}
|
||
|
|
||
|
static int ov2680_test_pattern_set(struct ov2680_dev *sensor, int value)
|
||
|
{
|
||
|
int ret;
|
||
|
|
||
|
if (!value)
|
||
|
return ov2680_mod_reg(sensor, OV2680_REG_ISP_CTRL00, BIT(7), 0);
|
||
|
|
||
|
ret = ov2680_mod_reg(sensor, OV2680_REG_ISP_CTRL00, 0x03, value - 1);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
ret = ov2680_mod_reg(sensor, OV2680_REG_ISP_CTRL00, BIT(7), BIT(7));
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int ov2680_gain_set(struct ov2680_dev *sensor, bool auto_gain)
|
||
|
{
|
||
|
struct ov2680_ctrls *ctrls = &sensor->ctrls;
|
||
|
u32 gain;
|
||
|
int ret;
|
||
|
|
||
|
ret = ov2680_mod_reg(sensor, OV2680_REG_R_MANUAL, BIT(1),
|
||
|
auto_gain ? 0 : BIT(1));
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
if (auto_gain || !ctrls->gain->is_new)
|
||
|
return 0;
|
||
|
|
||
|
gain = ctrls->gain->val;
|
||
|
|
||
|
ret = ov2680_write_reg16(sensor, OV2680_REG_GAIN_PK, gain);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int ov2680_gain_get(struct ov2680_dev *sensor)
|
||
|
{
|
||
|
u32 gain;
|
||
|
int ret;
|
||
|
|
||
|
ret = ov2680_read_reg16(sensor, OV2680_REG_GAIN_PK, &gain);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
return gain;
|
||
|
}
|
||
|
|
||
|
static int ov2680_exposure_set(struct ov2680_dev *sensor, bool auto_exp)
|
||
|
{
|
||
|
struct ov2680_ctrls *ctrls = &sensor->ctrls;
|
||
|
u32 exp;
|
||
|
int ret;
|
||
|
|
||
|
ret = ov2680_mod_reg(sensor, OV2680_REG_R_MANUAL, BIT(0),
|
||
|
auto_exp ? 0 : BIT(0));
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
if (auto_exp || !ctrls->exposure->is_new)
|
||
|
return 0;
|
||
|
|
||
|
exp = (u32)ctrls->exposure->val;
|
||
|
exp <<= 4;
|
||
|
|
||
|
return ov2680_write_reg24(sensor, OV2680_REG_EXPOSURE_PK_HIGH, exp);
|
||
|
}
|
||
|
|
||
|
static int ov2680_exposure_get(struct ov2680_dev *sensor)
|
||
|
{
|
||
|
int ret;
|
||
|
u32 exp;
|
||
|
|
||
|
ret = ov2680_read_reg24(sensor, OV2680_REG_EXPOSURE_PK_HIGH, &exp);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
return exp >> 4;
|
||
|
}
|
||
|
|
||
|
static int ov2680_stream_enable(struct ov2680_dev *sensor)
|
||
|
{
|
||
|
return ov2680_write_reg(sensor, OV2680_REG_STREAM_CTRL, 1);
|
||
|
}
|
||
|
|
||
|
static int ov2680_stream_disable(struct ov2680_dev *sensor)
|
||
|
{
|
||
|
return ov2680_write_reg(sensor, OV2680_REG_STREAM_CTRL, 0);
|
||
|
}
|
||
|
|
||
|
static int ov2680_mode_set(struct ov2680_dev *sensor)
|
||
|
{
|
||
|
struct ov2680_ctrls *ctrls = &sensor->ctrls;
|
||
|
int ret;
|
||
|
|
||
|
ret = ov2680_gain_set(sensor, false);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
ret = ov2680_exposure_set(sensor, false);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
ret = ov2680_load_regs(sensor, sensor->current_mode);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
if (ctrls->auto_gain->val) {
|
||
|
ret = ov2680_gain_set(sensor, true);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
if (ctrls->auto_exp->val == V4L2_EXPOSURE_AUTO) {
|
||
|
ret = ov2680_exposure_set(sensor, true);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
sensor->mode_pending_changes = false;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int ov2680_mode_restore(struct ov2680_dev *sensor)
|
||
|
{
|
||
|
int ret;
|
||
|
|
||
|
ret = ov2680_load_regs(sensor, &ov2680_mode_init_data);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
return ov2680_mode_set(sensor);
|
||
|
}
|
||
|
|
||
|
static int ov2680_power_off(struct ov2680_dev *sensor)
|
||
|
{
|
||
|
if (!sensor->is_enabled)
|
||
|
return 0;
|
||
|
|
||
|
clk_disable_unprepare(sensor->xvclk);
|
||
|
ov2680_power_down(sensor);
|
||
|
regulator_bulk_disable(OV2680_NUM_SUPPLIES, sensor->supplies);
|
||
|
sensor->is_enabled = false;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int ov2680_power_on(struct ov2680_dev *sensor)
|
||
|
{
|
||
|
struct device *dev = ov2680_to_dev(sensor);
|
||
|
int ret;
|
||
|
|
||
|
if (sensor->is_enabled)
|
||
|
return 0;
|
||
|
|
||
|
ret = regulator_bulk_enable(OV2680_NUM_SUPPLIES, sensor->supplies);
|
||
|
if (ret < 0) {
|
||
|
dev_err(dev, "failed to enable regulators: %d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
if (!sensor->reset_gpio) {
|
||
|
ret = ov2680_write_reg(sensor, OV2680_REG_SOFT_RESET, 0x01);
|
||
|
if (ret != 0) {
|
||
|
dev_err(dev, "sensor soft reset failed\n");
|
||
|
return ret;
|
||
|
}
|
||
|
usleep_range(1000, 2000);
|
||
|
} else {
|
||
|
ov2680_power_down(sensor);
|
||
|
ov2680_power_up(sensor);
|
||
|
}
|
||
|
|
||
|
ret = clk_prepare_enable(sensor->xvclk);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
ret = ov2680_mode_restore(sensor);
|
||
|
if (ret < 0)
|
||
|
goto disable;
|
||
|
|
||
|
sensor->is_enabled = true;
|
||
|
|
||
|
/* Set clock lane into LP-11 state */
|
||
|
ov2680_stream_enable(sensor);
|
||
|
usleep_range(1000, 2000);
|
||
|
ov2680_stream_disable(sensor);
|
||
|
|
||
|
return 0;
|
||
|
|
||
|
disable:
|
||
|
dev_err(dev, "failed to enable sensor: %d\n", ret);
|
||
|
ov2680_power_off(sensor);
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int ov2680_s_power(struct v4l2_subdev *sd, int on)
|
||
|
{
|
||
|
struct ov2680_dev *sensor = to_ov2680_dev(sd);
|
||
|
int ret = 0;
|
||
|
|
||
|
mutex_lock(&sensor->lock);
|
||
|
|
||
|
if (on)
|
||
|
ret = ov2680_power_on(sensor);
|
||
|
else
|
||
|
ret = ov2680_power_off(sensor);
|
||
|
|
||
|
mutex_unlock(&sensor->lock);
|
||
|
|
||
|
if (on && ret == 0) {
|
||
|
ret = v4l2_ctrl_handler_setup(&sensor->ctrls.handler);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int ov2680_s_g_frame_interval(struct v4l2_subdev *sd,
|
||
|
struct v4l2_subdev_frame_interval *fi)
|
||
|
{
|
||
|
struct ov2680_dev *sensor = to_ov2680_dev(sd);
|
||
|
|
||
|
mutex_lock(&sensor->lock);
|
||
|
fi->interval = sensor->frame_interval;
|
||
|
mutex_unlock(&sensor->lock);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int ov2680_s_stream(struct v4l2_subdev *sd, int enable)
|
||
|
{
|
||
|
struct ov2680_dev *sensor = to_ov2680_dev(sd);
|
||
|
int ret = 0;
|
||
|
|
||
|
mutex_lock(&sensor->lock);
|
||
|
|
||
|
if (sensor->is_streaming == !!enable)
|
||
|
goto unlock;
|
||
|
|
||
|
if (enable && sensor->mode_pending_changes) {
|
||
|
ret = ov2680_mode_set(sensor);
|
||
|
if (ret < 0)
|
||
|
goto unlock;
|
||
|
}
|
||
|
|
||
|
if (enable)
|
||
|
ret = ov2680_stream_enable(sensor);
|
||
|
else
|
||
|
ret = ov2680_stream_disable(sensor);
|
||
|
|
||
|
sensor->is_streaming = !!enable;
|
||
|
|
||
|
unlock:
|
||
|
mutex_unlock(&sensor->lock);
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int ov2680_enum_mbus_code(struct v4l2_subdev *sd,
|
||
|
struct v4l2_subdev_pad_config *cfg,
|
||
|
struct v4l2_subdev_mbus_code_enum *code)
|
||
|
{
|
||
|
struct ov2680_dev *sensor = to_ov2680_dev(sd);
|
||
|
|
||
|
if (code->pad != 0 || code->index != 0)
|
||
|
return -EINVAL;
|
||
|
|
||
|
code->code = sensor->fmt.code;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int ov2680_get_fmt(struct v4l2_subdev *sd,
|
||
|
struct v4l2_subdev_pad_config *cfg,
|
||
|
struct v4l2_subdev_format *format)
|
||
|
{
|
||
|
struct ov2680_dev *sensor = to_ov2680_dev(sd);
|
||
|
struct v4l2_mbus_framefmt *fmt = NULL;
|
||
|
int ret = 0;
|
||
|
|
||
|
if (format->pad != 0)
|
||
|
return -EINVAL;
|
||
|
|
||
|
mutex_lock(&sensor->lock);
|
||
|
|
||
|
if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
|
||
|
#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
|
||
|
fmt = v4l2_subdev_get_try_format(&sensor->sd, cfg, format->pad);
|
||
|
#else
|
||
|
ret = -ENOTTY;
|
||
|
#endif
|
||
|
} else {
|
||
|
fmt = &sensor->fmt;
|
||
|
}
|
||
|
|
||
|
if (fmt)
|
||
|
format->format = *fmt;
|
||
|
|
||
|
mutex_unlock(&sensor->lock);
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int ov2680_set_fmt(struct v4l2_subdev *sd,
|
||
|
struct v4l2_subdev_pad_config *cfg,
|
||
|
struct v4l2_subdev_format *format)
|
||
|
{
|
||
|
struct ov2680_dev *sensor = to_ov2680_dev(sd);
|
||
|
struct v4l2_mbus_framefmt *fmt = &format->format;
|
||
|
#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
|
||
|
struct v4l2_mbus_framefmt *try_fmt;
|
||
|
#endif
|
||
|
const struct ov2680_mode_info *mode;
|
||
|
int ret = 0;
|
||
|
|
||
|
if (format->pad != 0)
|
||
|
return -EINVAL;
|
||
|
|
||
|
mutex_lock(&sensor->lock);
|
||
|
|
||
|
if (sensor->is_streaming) {
|
||
|
ret = -EBUSY;
|
||
|
goto unlock;
|
||
|
}
|
||
|
|
||
|
mode = v4l2_find_nearest_size(ov2680_mode_data,
|
||
|
ARRAY_SIZE(ov2680_mode_data), width,
|
||
|
height, fmt->width, fmt->height);
|
||
|
if (!mode) {
|
||
|
ret = -EINVAL;
|
||
|
goto unlock;
|
||
|
}
|
||
|
|
||
|
if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
|
||
|
#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
|
||
|
try_fmt = v4l2_subdev_get_try_format(sd, cfg, 0);
|
||
|
format->format = *try_fmt;
|
||
|
#else
|
||
|
ret = -ENOTTY;
|
||
|
#endif
|
||
|
|
||
|
goto unlock;
|
||
|
}
|
||
|
|
||
|
fmt->width = mode->width;
|
||
|
fmt->height = mode->height;
|
||
|
fmt->code = sensor->fmt.code;
|
||
|
fmt->colorspace = sensor->fmt.colorspace;
|
||
|
|
||
|
sensor->current_mode = mode;
|
||
|
sensor->fmt = format->format;
|
||
|
sensor->mode_pending_changes = true;
|
||
|
|
||
|
unlock:
|
||
|
mutex_unlock(&sensor->lock);
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int ov2680_init_cfg(struct v4l2_subdev *sd,
|
||
|
struct v4l2_subdev_pad_config *cfg)
|
||
|
{
|
||
|
struct v4l2_subdev_format fmt = {
|
||
|
.which = cfg ? V4L2_SUBDEV_FORMAT_TRY
|
||
|
: V4L2_SUBDEV_FORMAT_ACTIVE,
|
||
|
.format = {
|
||
|
.width = 800,
|
||
|
.height = 600,
|
||
|
}
|
||
|
};
|
||
|
|
||
|
return ov2680_set_fmt(sd, cfg, &fmt);
|
||
|
}
|
||
|
|
||
|
static int ov2680_enum_frame_size(struct v4l2_subdev *sd,
|
||
|
struct v4l2_subdev_pad_config *cfg,
|
||
|
struct v4l2_subdev_frame_size_enum *fse)
|
||
|
{
|
||
|
int index = fse->index;
|
||
|
|
||
|
if (index >= OV2680_MODE_MAX || index < 0)
|
||
|
return -EINVAL;
|
||
|
|
||
|
fse->min_width = ov2680_mode_data[index].width;
|
||
|
fse->min_height = ov2680_mode_data[index].height;
|
||
|
fse->max_width = ov2680_mode_data[index].width;
|
||
|
fse->max_height = ov2680_mode_data[index].height;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int ov2680_enum_frame_interval(struct v4l2_subdev *sd,
|
||
|
struct v4l2_subdev_pad_config *cfg,
|
||
|
struct v4l2_subdev_frame_interval_enum *fie)
|
||
|
{
|
||
|
struct v4l2_fract tpf;
|
||
|
|
||
|
if (fie->index >= OV2680_MODE_MAX || fie->width > OV2680_WIDTH_MAX ||
|
||
|
fie->height > OV2680_HEIGHT_MAX ||
|
||
|
fie->which > V4L2_SUBDEV_FORMAT_ACTIVE)
|
||
|
return -EINVAL;
|
||
|
|
||
|
tpf.denominator = OV2680_FRAME_RATE;
|
||
|
tpf.numerator = 1;
|
||
|
|
||
|
fie->interval = tpf;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int ov2680_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
|
||
|
{
|
||
|
struct v4l2_subdev *sd = ctrl_to_sd(ctrl);
|
||
|
struct ov2680_dev *sensor = to_ov2680_dev(sd);
|
||
|
struct ov2680_ctrls *ctrls = &sensor->ctrls;
|
||
|
int val;
|
||
|
|
||
|
if (!sensor->is_enabled)
|
||
|
return 0;
|
||
|
|
||
|
switch (ctrl->id) {
|
||
|
case V4L2_CID_GAIN:
|
||
|
val = ov2680_gain_get(sensor);
|
||
|
if (val < 0)
|
||
|
return val;
|
||
|
ctrls->gain->val = val;
|
||
|
break;
|
||
|
case V4L2_CID_EXPOSURE:
|
||
|
val = ov2680_exposure_get(sensor);
|
||
|
if (val < 0)
|
||
|
return val;
|
||
|
ctrls->exposure->val = val;
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int ov2680_s_ctrl(struct v4l2_ctrl *ctrl)
|
||
|
{
|
||
|
struct v4l2_subdev *sd = ctrl_to_sd(ctrl);
|
||
|
struct ov2680_dev *sensor = to_ov2680_dev(sd);
|
||
|
struct ov2680_ctrls *ctrls = &sensor->ctrls;
|
||
|
|
||
|
if (!sensor->is_enabled)
|
||
|
return 0;
|
||
|
|
||
|
switch (ctrl->id) {
|
||
|
case V4L2_CID_AUTOGAIN:
|
||
|
return ov2680_gain_set(sensor, !!ctrl->val);
|
||
|
case V4L2_CID_GAIN:
|
||
|
return ov2680_gain_set(sensor, !!ctrls->auto_gain->val);
|
||
|
case V4L2_CID_EXPOSURE_AUTO:
|
||
|
return ov2680_exposure_set(sensor, !!ctrl->val);
|
||
|
case V4L2_CID_EXPOSURE:
|
||
|
return ov2680_exposure_set(sensor, !!ctrls->auto_exp->val);
|
||
|
case V4L2_CID_VFLIP:
|
||
|
if (sensor->is_streaming)
|
||
|
return -EBUSY;
|
||
|
if (ctrl->val)
|
||
|
return ov2680_vflip_enable(sensor);
|
||
|
else
|
||
|
return ov2680_vflip_disable(sensor);
|
||
|
case V4L2_CID_HFLIP:
|
||
|
if (sensor->is_streaming)
|
||
|
return -EBUSY;
|
||
|
if (ctrl->val)
|
||
|
return ov2680_hflip_enable(sensor);
|
||
|
else
|
||
|
return ov2680_hflip_disable(sensor);
|
||
|
case V4L2_CID_TEST_PATTERN:
|
||
|
return ov2680_test_pattern_set(sensor, ctrl->val);
|
||
|
default:
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
static const struct v4l2_ctrl_ops ov2680_ctrl_ops = {
|
||
|
.g_volatile_ctrl = ov2680_g_volatile_ctrl,
|
||
|
.s_ctrl = ov2680_s_ctrl,
|
||
|
};
|
||
|
|
||
|
static const struct v4l2_subdev_core_ops ov2680_core_ops = {
|
||
|
.s_power = ov2680_s_power,
|
||
|
};
|
||
|
|
||
|
static const struct v4l2_subdev_video_ops ov2680_video_ops = {
|
||
|
.g_frame_interval = ov2680_s_g_frame_interval,
|
||
|
.s_frame_interval = ov2680_s_g_frame_interval,
|
||
|
.s_stream = ov2680_s_stream,
|
||
|
};
|
||
|
|
||
|
static const struct v4l2_subdev_pad_ops ov2680_pad_ops = {
|
||
|
.init_cfg = ov2680_init_cfg,
|
||
|
.enum_mbus_code = ov2680_enum_mbus_code,
|
||
|
.get_fmt = ov2680_get_fmt,
|
||
|
.set_fmt = ov2680_set_fmt,
|
||
|
.enum_frame_size = ov2680_enum_frame_size,
|
||
|
.enum_frame_interval = ov2680_enum_frame_interval,
|
||
|
};
|
||
|
|
||
|
static const struct v4l2_subdev_ops ov2680_subdev_ops = {
|
||
|
.core = &ov2680_core_ops,
|
||
|
.video = &ov2680_video_ops,
|
||
|
.pad = &ov2680_pad_ops,
|
||
|
};
|
||
|
|
||
|
static int ov2680_mode_init(struct ov2680_dev *sensor)
|
||
|
{
|
||
|
const struct ov2680_mode_info *init_mode;
|
||
|
|
||
|
/* set initial mode */
|
||
|
sensor->fmt.code = MEDIA_BUS_FMT_SBGGR10_1X10;
|
||
|
sensor->fmt.width = 800;
|
||
|
sensor->fmt.height = 600;
|
||
|
sensor->fmt.field = V4L2_FIELD_NONE;
|
||
|
sensor->fmt.colorspace = V4L2_COLORSPACE_SRGB;
|
||
|
|
||
|
sensor->frame_interval.denominator = OV2680_FRAME_RATE;
|
||
|
sensor->frame_interval.numerator = 1;
|
||
|
|
||
|
init_mode = &ov2680_mode_init_data;
|
||
|
|
||
|
sensor->current_mode = init_mode;
|
||
|
|
||
|
sensor->mode_pending_changes = true;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int ov2680_v4l2_init(struct ov2680_dev *sensor)
|
||
|
{
|
||
|
const struct v4l2_ctrl_ops *ops = &ov2680_ctrl_ops;
|
||
|
struct ov2680_ctrls *ctrls = &sensor->ctrls;
|
||
|
struct v4l2_ctrl_handler *hdl = &ctrls->handler;
|
||
|
int ret = 0;
|
||
|
|
||
|
v4l2_i2c_subdev_init(&sensor->sd, sensor->i2c_client,
|
||
|
&ov2680_subdev_ops);
|
||
|
|
||
|
#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
|
||
|
sensor->sd.flags = V4L2_SUBDEV_FL_HAS_DEVNODE;
|
||
|
#endif
|
||
|
sensor->pad.flags = MEDIA_PAD_FL_SOURCE;
|
||
|
sensor->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
|
||
|
|
||
|
ret = media_entity_pads_init(&sensor->sd.entity, 1, &sensor->pad);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
v4l2_ctrl_handler_init(hdl, 7);
|
||
|
|
||
|
hdl->lock = &sensor->lock;
|
||
|
|
||
|
ctrls->vflip = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_VFLIP, 0, 1, 1, 0);
|
||
|
ctrls->hflip = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_HFLIP, 0, 1, 1, 0);
|
||
|
|
||
|
ctrls->test_pattern = v4l2_ctrl_new_std_menu_items(hdl,
|
||
|
&ov2680_ctrl_ops, V4L2_CID_TEST_PATTERN,
|
||
|
ARRAY_SIZE(test_pattern_menu) - 1,
|
||
|
0, 0, test_pattern_menu);
|
||
|
|
||
|
ctrls->auto_exp = v4l2_ctrl_new_std_menu(hdl, ops,
|
||
|
V4L2_CID_EXPOSURE_AUTO,
|
||
|
V4L2_EXPOSURE_MANUAL, 0,
|
||
|
V4L2_EXPOSURE_AUTO);
|
||
|
|
||
|
ctrls->exposure = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_EXPOSURE,
|
||
|
0, 32767, 1, 0);
|
||
|
|
||
|
ctrls->auto_gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_AUTOGAIN,
|
||
|
0, 1, 1, 1);
|
||
|
ctrls->gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_GAIN, 0, 2047, 1, 0);
|
||
|
|
||
|
if (hdl->error) {
|
||
|
ret = hdl->error;
|
||
|
goto cleanup_entity;
|
||
|
}
|
||
|
|
||
|
ctrls->gain->flags |= V4L2_CTRL_FLAG_VOLATILE;
|
||
|
ctrls->exposure->flags |= V4L2_CTRL_FLAG_VOLATILE;
|
||
|
|
||
|
v4l2_ctrl_auto_cluster(2, &ctrls->auto_gain, 0, true);
|
||
|
v4l2_ctrl_auto_cluster(2, &ctrls->auto_exp, 1, true);
|
||
|
|
||
|
sensor->sd.ctrl_handler = hdl;
|
||
|
|
||
|
ret = v4l2_async_register_subdev(&sensor->sd);
|
||
|
if (ret < 0)
|
||
|
goto cleanup_entity;
|
||
|
|
||
|
return 0;
|
||
|
|
||
|
cleanup_entity:
|
||
|
media_entity_cleanup(&sensor->sd.entity);
|
||
|
v4l2_ctrl_handler_free(hdl);
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int ov2680_get_regulators(struct ov2680_dev *sensor)
|
||
|
{
|
||
|
int i;
|
||
|
|
||
|
for (i = 0; i < OV2680_NUM_SUPPLIES; i++)
|
||
|
sensor->supplies[i].supply = ov2680_supply_name[i];
|
||
|
|
||
|
return devm_regulator_bulk_get(&sensor->i2c_client->dev,
|
||
|
OV2680_NUM_SUPPLIES,
|
||
|
sensor->supplies);
|
||
|
}
|
||
|
|
||
|
static int ov2680_check_id(struct ov2680_dev *sensor)
|
||
|
{
|
||
|
struct device *dev = ov2680_to_dev(sensor);
|
||
|
u32 chip_id;
|
||
|
int ret;
|
||
|
|
||
|
ov2680_power_on(sensor);
|
||
|
|
||
|
ret = ov2680_read_reg16(sensor, OV2680_REG_CHIP_ID_HIGH, &chip_id);
|
||
|
if (ret < 0) {
|
||
|
dev_err(dev, "failed to read chip id high\n");
|
||
|
return -ENODEV;
|
||
|
}
|
||
|
|
||
|
if (chip_id != OV2680_CHIP_ID) {
|
||
|
dev_err(dev, "chip id: 0x%04x does not match expected 0x%04x\n",
|
||
|
chip_id, OV2680_CHIP_ID);
|
||
|
return -ENODEV;
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int ov2860_parse_dt(struct ov2680_dev *sensor)
|
||
|
{
|
||
|
struct device *dev = ov2680_to_dev(sensor);
|
||
|
int ret;
|
||
|
|
||
|
sensor->reset_gpio = devm_gpiod_get_optional(dev, "reset",
|
||
|
GPIOD_OUT_HIGH);
|
||
|
ret = PTR_ERR_OR_ZERO(sensor->reset_gpio);
|
||
|
if (ret < 0) {
|
||
|
dev_dbg(dev, "error while getting reset gpio: %d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
sensor->xvclk = devm_clk_get(dev, "xvclk");
|
||
|
if (IS_ERR(sensor->xvclk)) {
|
||
|
dev_err(dev, "xvclk clock missing or invalid\n");
|
||
|
return PTR_ERR(sensor->xvclk);
|
||
|
}
|
||
|
|
||
|
sensor->xvclk_freq = clk_get_rate(sensor->xvclk);
|
||
|
if (sensor->xvclk_freq != OV2680_XVCLK_VALUE) {
|
||
|
dev_err(dev, "wrong xvclk frequency %d HZ, expected: %d Hz\n",
|
||
|
sensor->xvclk_freq, OV2680_XVCLK_VALUE);
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int ov2680_probe(struct i2c_client *client)
|
||
|
{
|
||
|
struct device *dev = &client->dev;
|
||
|
struct ov2680_dev *sensor;
|
||
|
int ret;
|
||
|
|
||
|
sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL);
|
||
|
if (!sensor)
|
||
|
return -ENOMEM;
|
||
|
|
||
|
sensor->i2c_client = client;
|
||
|
|
||
|
ret = ov2860_parse_dt(sensor);
|
||
|
if (ret < 0)
|
||
|
return -EINVAL;
|
||
|
|
||
|
ret = ov2680_mode_init(sensor);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
ret = ov2680_get_regulators(sensor);
|
||
|
if (ret < 0) {
|
||
|
dev_err(dev, "failed to get regulators\n");
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
mutex_init(&sensor->lock);
|
||
|
|
||
|
ret = ov2680_v4l2_init(sensor);
|
||
|
if (ret < 0)
|
||
|
goto lock_destroy;
|
||
|
|
||
|
ret = ov2680_check_id(sensor);
|
||
|
if (ret < 0)
|
||
|
goto error_cleanup;
|
||
|
|
||
|
dev_info(dev, "ov2680 init correctly\n");
|
||
|
|
||
|
return 0;
|
||
|
|
||
|
error_cleanup:
|
||
|
dev_err(dev, "ov2680 init fail: %d\n", ret);
|
||
|
|
||
|
media_entity_cleanup(&sensor->sd.entity);
|
||
|
v4l2_async_unregister_subdev(&sensor->sd);
|
||
|
v4l2_ctrl_handler_free(&sensor->ctrls.handler);
|
||
|
|
||
|
lock_destroy:
|
||
|
mutex_destroy(&sensor->lock);
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int ov2680_remove(struct i2c_client *client)
|
||
|
{
|
||
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
||
|
struct ov2680_dev *sensor = to_ov2680_dev(sd);
|
||
|
|
||
|
v4l2_async_unregister_subdev(&sensor->sd);
|
||
|
mutex_destroy(&sensor->lock);
|
||
|
media_entity_cleanup(&sensor->sd.entity);
|
||
|
v4l2_ctrl_handler_free(&sensor->ctrls.handler);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int __maybe_unused ov2680_suspend(struct device *dev)
|
||
|
{
|
||
|
struct i2c_client *client = to_i2c_client(dev);
|
||
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
||
|
struct ov2680_dev *sensor = to_ov2680_dev(sd);
|
||
|
|
||
|
if (sensor->is_streaming)
|
||
|
ov2680_stream_disable(sensor);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int __maybe_unused ov2680_resume(struct device *dev)
|
||
|
{
|
||
|
struct i2c_client *client = to_i2c_client(dev);
|
||
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
||
|
struct ov2680_dev *sensor = to_ov2680_dev(sd);
|
||
|
int ret;
|
||
|
|
||
|
if (sensor->is_streaming) {
|
||
|
ret = ov2680_stream_enable(sensor);
|
||
|
if (ret < 0)
|
||
|
goto stream_disable;
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
|
||
|
stream_disable:
|
||
|
ov2680_stream_disable(sensor);
|
||
|
sensor->is_streaming = false;
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static const struct dev_pm_ops ov2680_pm_ops = {
|
||
|
SET_SYSTEM_SLEEP_PM_OPS(ov2680_suspend, ov2680_resume)
|
||
|
};
|
||
|
|
||
|
static const struct of_device_id ov2680_dt_ids[] = {
|
||
|
{ .compatible = "ovti,ov2680" },
|
||
|
{ /* sentinel */ },
|
||
|
};
|
||
|
MODULE_DEVICE_TABLE(of, ov2680_dt_ids);
|
||
|
|
||
|
static struct i2c_driver ov2680_i2c_driver = {
|
||
|
.driver = {
|
||
|
.name = "ov2680",
|
||
|
.pm = &ov2680_pm_ops,
|
||
|
.of_match_table = of_match_ptr(ov2680_dt_ids),
|
||
|
},
|
||
|
.probe_new = ov2680_probe,
|
||
|
.remove = ov2680_remove,
|
||
|
};
|
||
|
module_i2c_driver(ov2680_i2c_driver);
|
||
|
|
||
|
MODULE_AUTHOR("Rui Miguel Silva <rui.silva@linaro.org>");
|
||
|
MODULE_DESCRIPTION("OV2680 CMOS Image Sensor driver");
|
||
|
MODULE_LICENSE("GPL v2");
|