linux-stable/arch/x86/entry/vdso/vma.c

460 lines
12 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright 2007 Andi Kleen, SUSE Labs.
*
* This contains most of the x86 vDSO kernel-side code.
*/
#include <linux/mm.h>
Remove fs.h from mm.h Remove fs.h from mm.h. For this, 1) Uninline vma_wants_writenotify(). It's pretty huge anyway. 2) Add back fs.h or less bloated headers (err.h) to files that need it. As result, on x86_64 allyesconfig, fs.h dependencies cut down from 3929 files rebuilt down to 3444 (-12.3%). Cross-compile tested without regressions on my two usual configs and (sigh): alpha arm-mx1ads mips-bigsur powerpc-ebony alpha-allnoconfig arm-neponset mips-capcella powerpc-g5 alpha-defconfig arm-netwinder mips-cobalt powerpc-holly alpha-up arm-netx mips-db1000 powerpc-iseries arm arm-ns9xxx mips-db1100 powerpc-linkstation arm-assabet arm-omap_h2_1610 mips-db1200 powerpc-lite5200 arm-at91rm9200dk arm-onearm mips-db1500 powerpc-maple arm-at91rm9200ek arm-picotux200 mips-db1550 powerpc-mpc7448_hpc2 arm-at91sam9260ek arm-pleb mips-ddb5477 powerpc-mpc8272_ads arm-at91sam9261ek arm-pnx4008 mips-decstation powerpc-mpc8313_rdb arm-at91sam9263ek arm-pxa255-idp mips-e55 powerpc-mpc832x_mds arm-at91sam9rlek arm-realview mips-emma2rh powerpc-mpc832x_rdb arm-ateb9200 arm-realview-smp mips-excite powerpc-mpc834x_itx arm-badge4 arm-rpc mips-fulong powerpc-mpc834x_itxgp arm-carmeva arm-s3c2410 mips-ip22 powerpc-mpc834x_mds arm-cerfcube arm-shannon mips-ip27 powerpc-mpc836x_mds arm-clps7500 arm-shark mips-ip32 powerpc-mpc8540_ads arm-collie arm-simpad mips-jazz powerpc-mpc8544_ds arm-corgi arm-spitz mips-jmr3927 powerpc-mpc8560_ads arm-csb337 arm-trizeps4 mips-malta powerpc-mpc8568mds arm-csb637 arm-versatile mips-mipssim powerpc-mpc85xx_cds arm-ebsa110 i386 mips-mpc30x powerpc-mpc8641_hpcn arm-edb7211 i386-allnoconfig mips-msp71xx powerpc-mpc866_ads arm-em_x270 i386-defconfig mips-ocelot powerpc-mpc885_ads arm-ep93xx i386-up mips-pb1100 powerpc-pasemi arm-footbridge ia64 mips-pb1500 powerpc-pmac32 arm-fortunet ia64-allnoconfig mips-pb1550 powerpc-ppc64 arm-h3600 ia64-bigsur mips-pnx8550-jbs powerpc-prpmc2800 arm-h7201 ia64-defconfig mips-pnx8550-stb810 powerpc-ps3 arm-h7202 ia64-gensparse mips-qemu powerpc-pseries arm-hackkit ia64-sim mips-rbhma4200 powerpc-up arm-integrator ia64-sn2 mips-rbhma4500 s390 arm-iop13xx ia64-tiger mips-rm200 s390-allnoconfig arm-iop32x ia64-up mips-sb1250-swarm s390-defconfig arm-iop33x ia64-zx1 mips-sead s390-up arm-ixp2000 m68k mips-tb0219 sparc arm-ixp23xx m68k-amiga mips-tb0226 sparc-allnoconfig arm-ixp4xx m68k-apollo mips-tb0287 sparc-defconfig arm-jornada720 m68k-atari mips-workpad sparc-up arm-kafa m68k-bvme6000 mips-wrppmc sparc64 arm-kb9202 m68k-hp300 mips-yosemite sparc64-allnoconfig arm-ks8695 m68k-mac parisc sparc64-defconfig arm-lart m68k-mvme147 parisc-allnoconfig sparc64-up arm-lpd270 m68k-mvme16x parisc-defconfig um-x86_64 arm-lpd7a400 m68k-q40 parisc-up x86_64 arm-lpd7a404 m68k-sun3 powerpc x86_64-allnoconfig arm-lubbock m68k-sun3x powerpc-cell x86_64-defconfig arm-lusl7200 mips powerpc-celleb x86_64-up arm-mainstone mips-atlas powerpc-chrp32 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-29 22:36:13 +00:00
#include <linux/err.h>
#include <linux/sched.h>
#include <linux/sched/task_stack.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/random.h>
#include <linux/elf.h>
#include <linux/cpu.h>
x86/vdso: Add mremap hook to vm_special_mapping Add possibility for 32-bit user-space applications to move the vDSO mapping. Previously, when a user-space app called mremap() for the vDSO address, in the syscall return path it would land on the previous address of the vDSOpage, resulting in segmentation violation. Now it lands fine and returns to userspace with a remapped vDSO. This will also fix the context.vdso pointer for 64-bit, which does not affect the user of vDSO after mremap() currently, but this may change in the future. As suggested by Andy, return -EINVAL for mremap() that would split the vDSO image: that operation cannot possibly result in a working system so reject it. Renamed and moved the text_mapping structure declaration inside map_vdso(), as it used only there and now it complements the vvar_mapping variable. There is still a problem for remapping the vDSO in glibc applications: the linker relocates addresses for syscalls on the vDSO page, so you need to relink with the new addresses. Without that the next syscall through glibc may fail: Program received signal SIGSEGV, Segmentation fault. #0 0xf7fd9b80 in __kernel_vsyscall () #1 0xf7ec8238 in _exit () from /usr/lib32/libc.so.6 Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: 0x7f454c46@gmail.com Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20160628113539.13606-2-dsafonov@virtuozzo.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-28 11:35:38 +00:00
#include <linux/ptrace.h>
#include <linux/time_namespace.h>
#include <asm/pvclock.h>
#include <asm/vgtod.h>
#include <asm/proto.h>
#include <asm/vdso.h>
#include <asm/vvar.h>
#include <asm/tlb.h>
#include <asm/page.h>
#include <asm/desc.h>
#include <asm/cpufeature.h>
clocksource/drivers: Continue making Hyper-V clocksource ISA agnostic Continue consolidating Hyper-V clock and timer code into an ISA independent Hyper-V clocksource driver. Move the existing clocksource code under drivers/hv and arch/x86 to the new clocksource driver while separating out the ISA dependencies. Update Hyper-V initialization to call initialization and cleanup routines since the Hyper-V synthetic clock is not independently enumerated in ACPI. Update Hyper-V clocksource users in KVM and VDSO to get definitions from the new include file. No behavior is changed and no new functionality is added. Suggested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: "bp@alien8.de" <bp@alien8.de> Cc: "will.deacon@arm.com" <will.deacon@arm.com> Cc: "catalin.marinas@arm.com" <catalin.marinas@arm.com> Cc: "mark.rutland@arm.com" <mark.rutland@arm.com> Cc: "linux-arm-kernel@lists.infradead.org" <linux-arm-kernel@lists.infradead.org> Cc: "gregkh@linuxfoundation.org" <gregkh@linuxfoundation.org> Cc: "linux-hyperv@vger.kernel.org" <linux-hyperv@vger.kernel.org> Cc: "olaf@aepfle.de" <olaf@aepfle.de> Cc: "apw@canonical.com" <apw@canonical.com> Cc: "jasowang@redhat.com" <jasowang@redhat.com> Cc: "marcelo.cerri@canonical.com" <marcelo.cerri@canonical.com> Cc: Sunil Muthuswamy <sunilmut@microsoft.com> Cc: KY Srinivasan <kys@microsoft.com> Cc: "sashal@kernel.org" <sashal@kernel.org> Cc: "vincenzo.frascino@arm.com" <vincenzo.frascino@arm.com> Cc: "linux-arch@vger.kernel.org" <linux-arch@vger.kernel.org> Cc: "linux-mips@vger.kernel.org" <linux-mips@vger.kernel.org> Cc: "linux-kselftest@vger.kernel.org" <linux-kselftest@vger.kernel.org> Cc: "arnd@arndb.de" <arnd@arndb.de> Cc: "linux@armlinux.org.uk" <linux@armlinux.org.uk> Cc: "ralf@linux-mips.org" <ralf@linux-mips.org> Cc: "paul.burton@mips.com" <paul.burton@mips.com> Cc: "daniel.lezcano@linaro.org" <daniel.lezcano@linaro.org> Cc: "salyzyn@android.com" <salyzyn@android.com> Cc: "pcc@google.com" <pcc@google.com> Cc: "shuah@kernel.org" <shuah@kernel.org> Cc: "0x7f454c46@gmail.com" <0x7f454c46@gmail.com> Cc: "linux@rasmusvillemoes.dk" <linux@rasmusvillemoes.dk> Cc: "huw@codeweavers.com" <huw@codeweavers.com> Cc: "sfr@canb.auug.org.au" <sfr@canb.auug.org.au> Cc: "pbonzini@redhat.com" <pbonzini@redhat.com> Cc: "rkrcmar@redhat.com" <rkrcmar@redhat.com> Cc: "kvm@vger.kernel.org" <kvm@vger.kernel.org> Link: https://lkml.kernel.org/r/1561955054-1838-3-git-send-email-mikelley@microsoft.com
2019-07-01 04:26:06 +00:00
#include <clocksource/hyperv_timer.h>
#undef _ASM_X86_VVAR_H
#define EMIT_VVAR(name, offset) \
const size_t name ## _offset = offset;
#include <asm/vvar.h>
struct vdso_data *arch_get_vdso_data(void *vvar_page)
{
return (struct vdso_data *)(vvar_page + _vdso_data_offset);
}
#undef EMIT_VVAR
unsigned int vclocks_used __read_mostly;
#if defined(CONFIG_X86_64)
unsigned int __read_mostly vdso64_enabled = 1;
#endif
x86, vdso: Reimplement vdso.so preparation in build-time C Currently, vdso.so files are prepared and analyzed by a combination of objcopy, nm, some linker script tricks, and some simple ELF parsers in the kernel. Replace all of that with plain C code that runs at build time. All five vdso images now generate .c files that are compiled and linked in to the kernel image. This should cause only one userspace-visible change: the loaded vDSO images are stripped more heavily than they used to be. Everything outside the loadable segment is dropped. In particular, this causes the section table and section name strings to be missing. This should be fine: real dynamic loaders don't load or inspect these tables anyway. The result is roughly equivalent to eu-strip's --strip-sections option. The purpose of this change is to enable the vvar and hpet mappings to be moved to the page following the vDSO load segment. Currently, it is possible for the section table to extend into the page after the load segment, so, if we map it, it risks overlapping the vvar or hpet page. This happens whenever the load segment is just under a multiple of PAGE_SIZE. The only real subtlety here is that the old code had a C file with inline assembler that did 'call VDSO32_vsyscall' and a linker script that defined 'VDSO32_vsyscall = __kernel_vsyscall'. This most likely worked by accident: the linker script entry defines a symbol associated with an address as opposed to an alias for the real dynamic symbol __kernel_vsyscall. That caused ld to relocate the reference at link time instead of leaving an interposable dynamic relocation. Since the VDSO32_vsyscall hack is no longer needed, I now use 'call __kernel_vsyscall', and I added -Bsymbolic to make it work. vdso2c will generate an error and abort the build if the resulting image contains any dynamic relocations, so we won't silently generate bad vdso images. (Dynamic relocations are a problem because nothing will even attempt to relocate the vdso.) Signed-off-by: Andy Lutomirski <luto@amacapital.net> Link: http://lkml.kernel.org/r/2c4fcf45524162a34d87fdda1eb046b2a5cecee7.1399317206.git.luto@amacapital.net Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-05-05 19:19:34 +00:00
void __init init_vdso_image(const struct vdso_image *image)
{
x86, vdso: Reimplement vdso.so preparation in build-time C Currently, vdso.so files are prepared and analyzed by a combination of objcopy, nm, some linker script tricks, and some simple ELF parsers in the kernel. Replace all of that with plain C code that runs at build time. All five vdso images now generate .c files that are compiled and linked in to the kernel image. This should cause only one userspace-visible change: the loaded vDSO images are stripped more heavily than they used to be. Everything outside the loadable segment is dropped. In particular, this causes the section table and section name strings to be missing. This should be fine: real dynamic loaders don't load or inspect these tables anyway. The result is roughly equivalent to eu-strip's --strip-sections option. The purpose of this change is to enable the vvar and hpet mappings to be moved to the page following the vDSO load segment. Currently, it is possible for the section table to extend into the page after the load segment, so, if we map it, it risks overlapping the vvar or hpet page. This happens whenever the load segment is just under a multiple of PAGE_SIZE. The only real subtlety here is that the old code had a C file with inline assembler that did 'call VDSO32_vsyscall' and a linker script that defined 'VDSO32_vsyscall = __kernel_vsyscall'. This most likely worked by accident: the linker script entry defines a symbol associated with an address as opposed to an alias for the real dynamic symbol __kernel_vsyscall. That caused ld to relocate the reference at link time instead of leaving an interposable dynamic relocation. Since the VDSO32_vsyscall hack is no longer needed, I now use 'call __kernel_vsyscall', and I added -Bsymbolic to make it work. vdso2c will generate an error and abort the build if the resulting image contains any dynamic relocations, so we won't silently generate bad vdso images. (Dynamic relocations are a problem because nothing will even attempt to relocate the vdso.) Signed-off-by: Andy Lutomirski <luto@amacapital.net> Link: http://lkml.kernel.org/r/2c4fcf45524162a34d87fdda1eb046b2a5cecee7.1399317206.git.luto@amacapital.net Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-05-05 19:19:34 +00:00
BUG_ON(image->size % PAGE_SIZE != 0);
x86, vdso: Reimplement vdso.so preparation in build-time C Currently, vdso.so files are prepared and analyzed by a combination of objcopy, nm, some linker script tricks, and some simple ELF parsers in the kernel. Replace all of that with plain C code that runs at build time. All five vdso images now generate .c files that are compiled and linked in to the kernel image. This should cause only one userspace-visible change: the loaded vDSO images are stripped more heavily than they used to be. Everything outside the loadable segment is dropped. In particular, this causes the section table and section name strings to be missing. This should be fine: real dynamic loaders don't load or inspect these tables anyway. The result is roughly equivalent to eu-strip's --strip-sections option. The purpose of this change is to enable the vvar and hpet mappings to be moved to the page following the vDSO load segment. Currently, it is possible for the section table to extend into the page after the load segment, so, if we map it, it risks overlapping the vvar or hpet page. This happens whenever the load segment is just under a multiple of PAGE_SIZE. The only real subtlety here is that the old code had a C file with inline assembler that did 'call VDSO32_vsyscall' and a linker script that defined 'VDSO32_vsyscall = __kernel_vsyscall'. This most likely worked by accident: the linker script entry defines a symbol associated with an address as opposed to an alias for the real dynamic symbol __kernel_vsyscall. That caused ld to relocate the reference at link time instead of leaving an interposable dynamic relocation. Since the VDSO32_vsyscall hack is no longer needed, I now use 'call __kernel_vsyscall', and I added -Bsymbolic to make it work. vdso2c will generate an error and abort the build if the resulting image contains any dynamic relocations, so we won't silently generate bad vdso images. (Dynamic relocations are a problem because nothing will even attempt to relocate the vdso.) Signed-off-by: Andy Lutomirski <luto@amacapital.net> Link: http://lkml.kernel.org/r/2c4fcf45524162a34d87fdda1eb046b2a5cecee7.1399317206.git.luto@amacapital.net Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-05-05 19:19:34 +00:00
apply_alternatives((struct alt_instr *)(image->data + image->alt),
(struct alt_instr *)(image->data + image->alt +
image->alt_len));
}
static const struct vm_special_mapping vvar_mapping;
struct linux_binprm;
static vm_fault_t vdso_fault(const struct vm_special_mapping *sm,
struct vm_area_struct *vma, struct vm_fault *vmf)
{
const struct vdso_image *image = vma->vm_mm->context.vdso_image;
if (!image || (vmf->pgoff << PAGE_SHIFT) >= image->size)
return VM_FAULT_SIGBUS;
vmf->page = virt_to_page(image->data + (vmf->pgoff << PAGE_SHIFT));
get_page(vmf->page);
return 0;
}
x86/vdso: Add mremap hook to vm_special_mapping Add possibility for 32-bit user-space applications to move the vDSO mapping. Previously, when a user-space app called mremap() for the vDSO address, in the syscall return path it would land on the previous address of the vDSOpage, resulting in segmentation violation. Now it lands fine and returns to userspace with a remapped vDSO. This will also fix the context.vdso pointer for 64-bit, which does not affect the user of vDSO after mremap() currently, but this may change in the future. As suggested by Andy, return -EINVAL for mremap() that would split the vDSO image: that operation cannot possibly result in a working system so reject it. Renamed and moved the text_mapping structure declaration inside map_vdso(), as it used only there and now it complements the vvar_mapping variable. There is still a problem for remapping the vDSO in glibc applications: the linker relocates addresses for syscalls on the vDSO page, so you need to relink with the new addresses. Without that the next syscall through glibc may fail: Program received signal SIGSEGV, Segmentation fault. #0 0xf7fd9b80 in __kernel_vsyscall () #1 0xf7ec8238 in _exit () from /usr/lib32/libc.so.6 Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: 0x7f454c46@gmail.com Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20160628113539.13606-2-dsafonov@virtuozzo.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-28 11:35:38 +00:00
static void vdso_fix_landing(const struct vdso_image *image,
struct vm_area_struct *new_vma)
{
#if defined CONFIG_X86_32 || defined CONFIG_IA32_EMULATION
if (in_ia32_syscall() && image == &vdso_image_32) {
struct pt_regs *regs = current_pt_regs();
unsigned long vdso_land = image->sym_int80_landing_pad;
unsigned long old_land_addr = vdso_land +
(unsigned long)current->mm->context.vdso;
/* Fixing userspace landing - look at do_fast_syscall_32 */
if (regs->ip == old_land_addr)
regs->ip = new_vma->vm_start + vdso_land;
}
#endif
}
static int vdso_mremap(const struct vm_special_mapping *sm,
struct vm_area_struct *new_vma)
{
const struct vdso_image *image = current->mm->context.vdso_image;
vdso_fix_landing(image, new_vma);
current->mm->context.vdso = (void __user *)new_vma->vm_start;
return 0;
}
#ifdef CONFIG_TIME_NS
static struct page *find_timens_vvar_page(struct vm_area_struct *vma)
{
if (likely(vma->vm_mm == current->mm))
return current->nsproxy->time_ns->vvar_page;
/*
* VM_PFNMAP | VM_IO protect .fault() handler from being called
* through interfaces like /proc/$pid/mem or
* process_vm_{readv,writev}() as long as there's no .access()
* in special_mapping_vmops().
* For more details check_vma_flags() and __access_remote_vm()
*/
WARN(1, "vvar_page accessed remotely");
return NULL;
}
/*
* The vvar page layout depends on whether a task belongs to the root or
* non-root time namespace. Whenever a task changes its namespace, the VVAR
* page tables are cleared and then they will re-faulted with a
* corresponding layout.
* See also the comment near timens_setup_vdso_data() for details.
*/
int vdso_join_timens(struct task_struct *task, struct time_namespace *ns)
{
struct mm_struct *mm = task->mm;
struct vm_area_struct *vma;
VMA_ITERATOR(vmi, mm, 0);
timens: make vdso_join_timens() always succeed As discussed on-list (cf. [1]), in order to make setns() support time namespaces when attaching to multiple namespaces at once properly we need to tweak vdso_join_timens() to always succeed. So switch vdso_join_timens() to using a read lock and replacing mmap_write_lock_killable() to mmap_read_lock() as we discussed. Last cycle setns() was changed to support attaching to multiple namespaces atomically. This requires all namespaces to have a point of no return where they can't fail anymore. Specifically, <namespace-type>_install() is allowed to perform permission checks and install the namespace into the new struct nsset that it has been given but it is not allowed to make visible changes to the affected task. Once <namespace-type>_install() returns anything that the given namespace type requires to be setup in addition needs to ideally be done in a function that can't fail or if it fails the failure is not fatal. For time namespaces the relevant functions that fall into this category are timens_set_vvar_page() and vdso_join_timens(). Currently the latter can fail but doesn't need to. With this we can go on to implement a timens_commit() helper in a follow up patch to be used by setns(). [1]: https://lore.kernel.org/lkml/20200611110221.pgd3r5qkjrjmfqa2@wittgenstein Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Reviewed-by: Andrei Vagin <avagin@gmail.com> Cc: Will Deacon <will@kernel.org> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Dmitry Safonov <dima@arista.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20200706154912.3248030-2-christian.brauner@ubuntu.com
2020-07-06 15:49:09 +00:00
mmap_read_lock(mm);
for_each_vma(vmi, vma) {
unsigned long size = vma->vm_end - vma->vm_start;
if (vma_is_special_mapping(vma, &vvar_mapping))
zap_page_range(vma, vma->vm_start, size);
}
timens: make vdso_join_timens() always succeed As discussed on-list (cf. [1]), in order to make setns() support time namespaces when attaching to multiple namespaces at once properly we need to tweak vdso_join_timens() to always succeed. So switch vdso_join_timens() to using a read lock and replacing mmap_write_lock_killable() to mmap_read_lock() as we discussed. Last cycle setns() was changed to support attaching to multiple namespaces atomically. This requires all namespaces to have a point of no return where they can't fail anymore. Specifically, <namespace-type>_install() is allowed to perform permission checks and install the namespace into the new struct nsset that it has been given but it is not allowed to make visible changes to the affected task. Once <namespace-type>_install() returns anything that the given namespace type requires to be setup in addition needs to ideally be done in a function that can't fail or if it fails the failure is not fatal. For time namespaces the relevant functions that fall into this category are timens_set_vvar_page() and vdso_join_timens(). Currently the latter can fail but doesn't need to. With this we can go on to implement a timens_commit() helper in a follow up patch to be used by setns(). [1]: https://lore.kernel.org/lkml/20200611110221.pgd3r5qkjrjmfqa2@wittgenstein Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Reviewed-by: Andrei Vagin <avagin@gmail.com> Cc: Will Deacon <will@kernel.org> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Dmitry Safonov <dima@arista.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20200706154912.3248030-2-christian.brauner@ubuntu.com
2020-07-06 15:49:09 +00:00
mmap_read_unlock(mm);
return 0;
}
#else
static inline struct page *find_timens_vvar_page(struct vm_area_struct *vma)
{
return NULL;
}
#endif
static vm_fault_t vvar_fault(const struct vm_special_mapping *sm,
struct vm_area_struct *vma, struct vm_fault *vmf)
{
const struct vdso_image *image = vma->vm_mm->context.vdso_image;
unsigned long pfn;
long sym_offset;
if (!image)
return VM_FAULT_SIGBUS;
sym_offset = (long)(vmf->pgoff << PAGE_SHIFT) +
image->sym_vvar_start;
/*
* Sanity check: a symbol offset of zero means that the page
* does not exist for this vdso image, not that the page is at
* offset zero relative to the text mapping. This should be
* impossible here, because sym_offset should only be zero for
* the page past the end of the vvar mapping.
*/
if (sym_offset == 0)
return VM_FAULT_SIGBUS;
if (sym_offset == image->sym_vvar_page) {
struct page *timens_page = find_timens_vvar_page(vma);
pfn = __pa_symbol(&__vvar_page) >> PAGE_SHIFT;
/*
* If a task belongs to a time namespace then a namespace
* specific VVAR is mapped with the sym_vvar_page offset and
* the real VVAR page is mapped with the sym_timens_page
* offset.
* See also the comment near timens_setup_vdso_data().
*/
if (timens_page) {
unsigned long addr;
vm_fault_t err;
/*
* Optimization: inside time namespace pre-fault
* VVAR page too. As on timens page there are only
* offsets for clocks on VVAR, it'll be faulted
* shortly by VDSO code.
*/
addr = vmf->address + (image->sym_timens_page - sym_offset);
err = vmf_insert_pfn(vma, addr, pfn);
if (unlikely(err & VM_FAULT_ERROR))
return err;
pfn = page_to_pfn(timens_page);
}
return vmf_insert_pfn(vma, vmf->address, pfn);
} else if (sym_offset == image->sym_pvclock_page) {
struct pvclock_vsyscall_time_info *pvti =
pvclock_get_pvti_cpu0_va();
if (pvti && vclock_was_used(VDSO_CLOCKMODE_PVCLOCK)) {
return vmf_insert_pfn_prot(vma, vmf->address,
__pa(pvti) >> PAGE_SHIFT,
pgprot_decrypted(vma->vm_page_prot));
}
} else if (sym_offset == image->sym_hvclock_page) {
struct ms_hyperv_tsc_page *tsc_pg = hv_get_tsc_page();
if (tsc_pg && vclock_was_used(VDSO_CLOCKMODE_HVCLOCK))
return vmf_insert_pfn(vma, vmf->address,
virt_to_phys(tsc_pg) >> PAGE_SHIFT);
} else if (sym_offset == image->sym_timens_page) {
struct page *timens_page = find_timens_vvar_page(vma);
if (!timens_page)
return VM_FAULT_SIGBUS;
pfn = __pa_symbol(&__vvar_page) >> PAGE_SHIFT;
return vmf_insert_pfn(vma, vmf->address, pfn);
}
return VM_FAULT_SIGBUS;
}
static const struct vm_special_mapping vdso_mapping = {
.name = "[vdso]",
.fault = vdso_fault,
.mremap = vdso_mremap,
};
static const struct vm_special_mapping vvar_mapping = {
.name = "[vvar]",
.fault = vvar_fault,
};
/*
* Add vdso and vvar mappings to current process.
* @image - blob to map
* @addr - request a specific address (zero to map at free addr)
*/
static int map_vdso(const struct vdso_image *image, unsigned long addr)
{
struct mm_struct *mm = current->mm;
struct vm_area_struct *vma;
unsigned long text_start;
int ret = 0;
x86/vdso: Add mremap hook to vm_special_mapping Add possibility for 32-bit user-space applications to move the vDSO mapping. Previously, when a user-space app called mremap() for the vDSO address, in the syscall return path it would land on the previous address of the vDSOpage, resulting in segmentation violation. Now it lands fine and returns to userspace with a remapped vDSO. This will also fix the context.vdso pointer for 64-bit, which does not affect the user of vDSO after mremap() currently, but this may change in the future. As suggested by Andy, return -EINVAL for mremap() that would split the vDSO image: that operation cannot possibly result in a working system so reject it. Renamed and moved the text_mapping structure declaration inside map_vdso(), as it used only there and now it complements the vvar_mapping variable. There is still a problem for remapping the vDSO in glibc applications: the linker relocates addresses for syscalls on the vDSO page, so you need to relink with the new addresses. Without that the next syscall through glibc may fail: Program received signal SIGSEGV, Segmentation fault. #0 0xf7fd9b80 in __kernel_vsyscall () #1 0xf7ec8238 in _exit () from /usr/lib32/libc.so.6 Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: 0x7f454c46@gmail.com Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20160628113539.13606-2-dsafonov@virtuozzo.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-28 11:35:38 +00:00
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 04:33:25 +00:00
if (mmap_write_lock_killable(mm))
return -EINTR;
addr = get_unmapped_area(NULL, addr,
image->size - image->sym_vvar_start, 0, 0);
if (IS_ERR_VALUE(addr)) {
ret = addr;
goto up_fail;
}
text_start = addr - image->sym_vvar_start;
/*
* MAYWRITE to allow gdb to COW and set breakpoints
*/
vma = _install_special_mapping(mm,
text_start,
image->size,
VM_READ|VM_EXEC|
VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC,
x86/vdso: Add mremap hook to vm_special_mapping Add possibility for 32-bit user-space applications to move the vDSO mapping. Previously, when a user-space app called mremap() for the vDSO address, in the syscall return path it would land on the previous address of the vDSOpage, resulting in segmentation violation. Now it lands fine and returns to userspace with a remapped vDSO. This will also fix the context.vdso pointer for 64-bit, which does not affect the user of vDSO after mremap() currently, but this may change in the future. As suggested by Andy, return -EINVAL for mremap() that would split the vDSO image: that operation cannot possibly result in a working system so reject it. Renamed and moved the text_mapping structure declaration inside map_vdso(), as it used only there and now it complements the vvar_mapping variable. There is still a problem for remapping the vDSO in glibc applications: the linker relocates addresses for syscalls on the vDSO page, so you need to relink with the new addresses. Without that the next syscall through glibc may fail: Program received signal SIGSEGV, Segmentation fault. #0 0xf7fd9b80 in __kernel_vsyscall () #1 0xf7ec8238 in _exit () from /usr/lib32/libc.so.6 Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: 0x7f454c46@gmail.com Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20160628113539.13606-2-dsafonov@virtuozzo.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-28 11:35:38 +00:00
&vdso_mapping);
if (IS_ERR(vma)) {
ret = PTR_ERR(vma);
goto up_fail;
}
vma = _install_special_mapping(mm,
addr,
-image->sym_vvar_start,
VM_READ|VM_MAYREAD|VM_IO|VM_DONTDUMP|
VM_PFNMAP,
&vvar_mapping);
if (IS_ERR(vma)) {
ret = PTR_ERR(vma);
do_munmap(mm, text_start, image->size, NULL);
} else {
current->mm->context.vdso = (void __user *)text_start;
current->mm->context.vdso_image = image;
}
up_fail:
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 04:33:25 +00:00
mmap_write_unlock(mm);
return ret;
}
#ifdef CONFIG_X86_64
/*
* Put the vdso above the (randomized) stack with another randomized
* offset. This way there is no hole in the middle of address space.
* To save memory make sure it is still in the same PTE as the stack
* top. This doesn't give that many random bits.
*
* Note that this algorithm is imperfect: the distribution of the vdso
* start address within a PMD is biased toward the end.
*
* Only used for the 64-bit and x32 vdsos.
*/
static unsigned long vdso_addr(unsigned long start, unsigned len)
{
unsigned long addr, end;
unsigned offset;
/*
* Round up the start address. It can start out unaligned as a result
* of stack start randomization.
*/
start = PAGE_ALIGN(start);
/* Round the lowest possible end address up to a PMD boundary. */
end = (start + len + PMD_SIZE - 1) & PMD_MASK;
if (end >= TASK_SIZE_MAX)
end = TASK_SIZE_MAX;
end -= len;
if (end > start) {
offset = get_random_u32_below(((end - start) >> PAGE_SHIFT) + 1);
addr = start + (offset << PAGE_SHIFT);
} else {
addr = start;
}
/*
* Forcibly align the final address in case we have a hardware
* issue that requires alignment for performance reasons.
*/
addr = align_vdso_addr(addr);
return addr;
}
static int map_vdso_randomized(const struct vdso_image *image)
{
unsigned long addr = vdso_addr(current->mm->start_stack, image->size-image->sym_vvar_start);
return map_vdso(image, addr);
}
#endif
int map_vdso_once(const struct vdso_image *image, unsigned long addr)
{
struct mm_struct *mm = current->mm;
struct vm_area_struct *vma;
VMA_ITERATOR(vmi, mm, 0);
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 04:33:25 +00:00
mmap_write_lock(mm);
/*
* Check if we have already mapped vdso blob - fail to prevent
* abusing from userspace install_special_mapping, which may
* not do accounting and rlimit right.
* We could search vma near context.vdso, but it's a slowpath,
* so let's explicitly check all VMAs to be completely sure.
*/
for_each_vma(vmi, vma) {
if (vma_is_special_mapping(vma, &vdso_mapping) ||
vma_is_special_mapping(vma, &vvar_mapping)) {
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 04:33:25 +00:00
mmap_write_unlock(mm);
return -EEXIST;
}
}
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 04:33:25 +00:00
mmap_write_unlock(mm);
return map_vdso(image, addr);
}
#if defined(CONFIG_X86_32) || defined(CONFIG_IA32_EMULATION)
static int load_vdso32(void)
{
if (vdso32_enabled != 1) /* Other values all mean "disabled" */
return 0;
return map_vdso(&vdso_image_32, 0);
}
#endif
#ifdef CONFIG_X86_64
int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
{
if (!vdso64_enabled)
return 0;
return map_vdso_randomized(&vdso_image_64);
}
#ifdef CONFIG_COMPAT
int compat_arch_setup_additional_pages(struct linux_binprm *bprm,
int uses_interp, bool x32)
{
#ifdef CONFIG_X86_X32_ABI
if (x32) {
if (!vdso64_enabled)
return 0;
return map_vdso_randomized(&vdso_image_x32);
}
#endif
#ifdef CONFIG_IA32_EMULATION
return load_vdso32();
#else
return 0;
#endif
}
#endif
#else
int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
{
return load_vdso32();
}
#endif
bool arch_syscall_is_vdso_sigreturn(struct pt_regs *regs)
{
#if defined(CONFIG_X86_32) || defined(CONFIG_IA32_EMULATION)
const struct vdso_image *image = current->mm->context.vdso_image;
unsigned long vdso = (unsigned long) current->mm->context.vdso;
if (in_ia32_syscall() && image == &vdso_image_32) {
if (regs->ip == vdso + image->sym_vdso32_sigreturn_landing_pad ||
regs->ip == vdso + image->sym_vdso32_rt_sigreturn_landing_pad)
return true;
}
#endif
return false;
}
#ifdef CONFIG_X86_64
static __init int vdso_setup(char *s)
{
vdso64_enabled = simple_strtoul(s, NULL, 0);
return 1;
}
__setup("vdso=", vdso_setup);
static int __init init_vdso(void)
{
BUILD_BUG_ON(VDSO_CLOCKMODE_MAX >= 32);
init_vdso_image(&vdso_image_64);
#ifdef CONFIG_X86_X32_ABI
init_vdso_image(&vdso_image_x32);
#endif
return 0;
}
subsys_initcall(init_vdso);
#endif /* CONFIG_X86_64 */