2013-03-04 09:09:30 +00:00
|
|
|
DMA Test Guide
|
|
|
|
==============
|
|
|
|
|
|
|
|
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
|
|
|
|
|
|
This small document introduces how to test DMA drivers using dmatest module.
|
|
|
|
|
|
|
|
Part 1 - How to build the test module
|
|
|
|
|
|
|
|
The menuconfig contains an option that could be found by following path:
|
|
|
|
Device Drivers -> DMA Engine support -> DMA Test client
|
|
|
|
|
|
|
|
In the configuration file the option called CONFIG_DMATEST. The dmatest could
|
|
|
|
be built as module or inside kernel. Let's consider those cases.
|
|
|
|
|
|
|
|
Part 2 - When dmatest is built as a module...
|
|
|
|
|
|
|
|
Example of usage:
|
2013-11-07 00:30:01 +00:00
|
|
|
% modprobe dmatest channel=dma0chan0 timeout=2000 iterations=1 run=1
|
|
|
|
|
|
|
|
...or:
|
|
|
|
% modprobe dmatest
|
2013-07-23 15:36:46 +00:00
|
|
|
% echo dma0chan0 > /sys/module/dmatest/parameters/channel
|
|
|
|
% echo 2000 > /sys/module/dmatest/parameters/timeout
|
|
|
|
% echo 1 > /sys/module/dmatest/parameters/iterations
|
2013-11-07 00:30:01 +00:00
|
|
|
% echo 1 > /sys/module/dmatest/parameters/run
|
|
|
|
|
|
|
|
...or on the kernel command line:
|
|
|
|
|
|
|
|
dmatest.channel=dma0chan0 dmatest.timeout=2000 dmatest.iterations=1 dmatest.run=1
|
2013-03-04 09:09:30 +00:00
|
|
|
|
|
|
|
Hint: available channel list could be extracted by running the following
|
|
|
|
command:
|
|
|
|
% ls -1 /sys/class/dma/
|
|
|
|
|
2013-11-07 00:29:58 +00:00
|
|
|
Once started a message like "dmatest: Started 1 threads using dma0chan0" is
|
|
|
|
emitted. After that only test failure messages are reported until the test
|
|
|
|
stops.
|
2013-03-04 09:09:30 +00:00
|
|
|
|
2013-05-23 11:29:53 +00:00
|
|
|
Note that running a new test will not stop any in progress test.
|
2013-03-04 09:09:30 +00:00
|
|
|
|
2013-03-04 09:09:31 +00:00
|
|
|
The following command should return actual state of the test.
|
|
|
|
% cat /sys/kernel/debug/dmatest/run
|
|
|
|
|
|
|
|
To wait for test done the user may perform a busy loop that checks the state.
|
|
|
|
|
2013-11-07 00:30:01 +00:00
|
|
|
% while [ $(cat /sys/module/dmatest/parameters/run) = "Y" ]
|
2013-03-04 09:09:31 +00:00
|
|
|
> do
|
|
|
|
> echo -n "."
|
|
|
|
> sleep 1
|
|
|
|
> done
|
|
|
|
> echo
|
|
|
|
|
2013-03-04 09:09:30 +00:00
|
|
|
Part 3 - When built-in in the kernel...
|
|
|
|
|
|
|
|
The module parameters that is supplied to the kernel command line will be used
|
|
|
|
for the first performed test. After user gets a control, the test could be
|
2013-05-23 11:29:53 +00:00
|
|
|
re-run with the same or different parameters. For the details see the above
|
|
|
|
section "Part 2 - When dmatest is built as a module..."
|
2013-03-04 09:09:30 +00:00
|
|
|
|
2013-07-23 15:36:46 +00:00
|
|
|
In both cases the module parameters are used as the actual values for the test
|
|
|
|
case. You always could check them at run-time by running
|
2013-03-04 09:09:30 +00:00
|
|
|
% grep -H . /sys/module/dmatest/parameters/*
|
2013-03-04 09:09:33 +00:00
|
|
|
|
|
|
|
Part 4 - Gathering the test results
|
|
|
|
|
2013-11-07 00:29:58 +00:00
|
|
|
Test results are printed to the kernel log buffer with the format:
|
2013-03-04 09:09:33 +00:00
|
|
|
|
2013-11-07 00:29:58 +00:00
|
|
|
"dmatest: result <channel>: <test id>: '<error msg>' with src_off=<val> dst_off=<val> len=<val> (<err code>)"
|
2013-03-04 09:09:33 +00:00
|
|
|
|
|
|
|
Example of output:
|
2013-11-07 00:29:58 +00:00
|
|
|
% dmesg | tail -n 1
|
|
|
|
dmatest: result dma0chan0-copy0: #1: No errors with src_off=0x7bf dst_off=0x8ad len=0x3fea (0)
|
2013-03-04 09:09:33 +00:00
|
|
|
|
|
|
|
The message format is unified across the different types of errors. A number in
|
|
|
|
the parens represents additional information, e.g. error code, error counter,
|
2013-11-07 00:29:58 +00:00
|
|
|
or status. A test thread also emits a summary line at completion listing the
|
|
|
|
number of tests executed, number that failed, and a result code.
|
2013-03-04 09:09:33 +00:00
|
|
|
|
2013-11-07 00:30:07 +00:00
|
|
|
Example:
|
|
|
|
% dmesg | tail -n 1
|
|
|
|
dmatest: dma3chan0-copy0: summary 400000 tests, 0 failures iops: 61524 KB/s 246098 (0)
|
|
|
|
|
2013-11-07 00:29:58 +00:00
|
|
|
The details of a data miscompare error are also emitted, but do not follow the
|
|
|
|
above format.
|