linux-stable/drivers/gpu/drm/tiny/simpledrm.c

871 lines
23 KiB
C
Raw Normal View History

drm: Add simpledrm driver The simpledrm driver is a DRM driver for simple-framebuffer framebuffers as provided by the kernel's boot code. This driver enables basic graphical output on many different graphics devices that are provided by the platform (e.g., EFI, VESA, embedded framebuffers). With the kernel's simple-framebuffer infrastructure, the kernel receives a pre-configured framebuffer from the system (i.e., firmware, boot loader). It creates a platform device to which simpledrm attaches. The system's framebuffer consists of a memory range, size and format. Based on these values, simpledrm creates a DRM devices. No actual modesetting is possible. A firmware framebuffer might also be specified via device-tree files. If no device platform data is given, try the DT device node. Make sure required hardware clocks and regulators are enabled while the firmware framebuffer is in use. The basic code has been taken from the simplefb driver and adapted to DRM. Clocks are released automatically via devres helpers. The drivers displays a console on simpledrm's framebuffer. The default framebuffer format is being used. v4: * disable simplefb if simpledrm has been selected (Maxime) v3: * add disable function that clears screen to black (Daniel) * set shadow buffering only for fbdev emulation * set platform-driver data during device creation v2: * rename driver to simpledrm * add dri-devel to MAINTAINERS entry * put native format first in primary-plane format list (Daniel) * inline simplekms_device_cleanup() (Daniel) * use helpers for shadow-buffered planes * fix whitespace errors * add Device Tree match table * clean-up parser wrappers * use strscpy() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> # fbdev support Acked-by: Maxime Ripard <maxime@cerno.tech> Tested-by: nerdopolis <bluescreen_avenger@verizon.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-5-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-6-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-7-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-8-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-9-tzimmermann@suse.de
2021-04-30 10:58:35 +00:00
// SPDX-License-Identifier: GPL-2.0-only
#include <linux/clk.h>
#include <linux/of_clk.h>
#include <linux/minmax.h>
drm: Add simpledrm driver The simpledrm driver is a DRM driver for simple-framebuffer framebuffers as provided by the kernel's boot code. This driver enables basic graphical output on many different graphics devices that are provided by the platform (e.g., EFI, VESA, embedded framebuffers). With the kernel's simple-framebuffer infrastructure, the kernel receives a pre-configured framebuffer from the system (i.e., firmware, boot loader). It creates a platform device to which simpledrm attaches. The system's framebuffer consists of a memory range, size and format. Based on these values, simpledrm creates a DRM devices. No actual modesetting is possible. A firmware framebuffer might also be specified via device-tree files. If no device platform data is given, try the DT device node. Make sure required hardware clocks and regulators are enabled while the firmware framebuffer is in use. The basic code has been taken from the simplefb driver and adapted to DRM. Clocks are released automatically via devres helpers. The drivers displays a console on simpledrm's framebuffer. The default framebuffer format is being used. v4: * disable simplefb if simpledrm has been selected (Maxime) v3: * add disable function that clears screen to black (Daniel) * set shadow buffering only for fbdev emulation * set platform-driver data during device creation v2: * rename driver to simpledrm * add dri-devel to MAINTAINERS entry * put native format first in primary-plane format list (Daniel) * inline simplekms_device_cleanup() (Daniel) * use helpers for shadow-buffered planes * fix whitespace errors * add Device Tree match table * clean-up parser wrappers * use strscpy() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> # fbdev support Acked-by: Maxime Ripard <maxime@cerno.tech> Tested-by: nerdopolis <bluescreen_avenger@verizon.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-5-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-6-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-7-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-8-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-9-tzimmermann@suse.de
2021-04-30 10:58:35 +00:00
#include <linux/platform_data/simplefb.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <drm/drm_aperture.h>
#include <drm/drm_atomic.h>
drm: Add simpledrm driver The simpledrm driver is a DRM driver for simple-framebuffer framebuffers as provided by the kernel's boot code. This driver enables basic graphical output on many different graphics devices that are provided by the platform (e.g., EFI, VESA, embedded framebuffers). With the kernel's simple-framebuffer infrastructure, the kernel receives a pre-configured framebuffer from the system (i.e., firmware, boot loader). It creates a platform device to which simpledrm attaches. The system's framebuffer consists of a memory range, size and format. Based on these values, simpledrm creates a DRM devices. No actual modesetting is possible. A firmware framebuffer might also be specified via device-tree files. If no device platform data is given, try the DT device node. Make sure required hardware clocks and regulators are enabled while the firmware framebuffer is in use. The basic code has been taken from the simplefb driver and adapted to DRM. Clocks are released automatically via devres helpers. The drivers displays a console on simpledrm's framebuffer. The default framebuffer format is being used. v4: * disable simplefb if simpledrm has been selected (Maxime) v3: * add disable function that clears screen to black (Daniel) * set shadow buffering only for fbdev emulation * set platform-driver data during device creation v2: * rename driver to simpledrm * add dri-devel to MAINTAINERS entry * put native format first in primary-plane format list (Daniel) * inline simplekms_device_cleanup() (Daniel) * use helpers for shadow-buffered planes * fix whitespace errors * add Device Tree match table * clean-up parser wrappers * use strscpy() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> # fbdev support Acked-by: Maxime Ripard <maxime@cerno.tech> Tested-by: nerdopolis <bluescreen_avenger@verizon.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-5-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-6-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-7-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-8-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-9-tzimmermann@suse.de
2021-04-30 10:58:35 +00:00
#include <drm/drm_atomic_state_helper.h>
#include <drm/drm_connector.h>
#include <drm/drm_crtc_helper.h>
drm: Add simpledrm driver The simpledrm driver is a DRM driver for simple-framebuffer framebuffers as provided by the kernel's boot code. This driver enables basic graphical output on many different graphics devices that are provided by the platform (e.g., EFI, VESA, embedded framebuffers). With the kernel's simple-framebuffer infrastructure, the kernel receives a pre-configured framebuffer from the system (i.e., firmware, boot loader). It creates a platform device to which simpledrm attaches. The system's framebuffer consists of a memory range, size and format. Based on these values, simpledrm creates a DRM devices. No actual modesetting is possible. A firmware framebuffer might also be specified via device-tree files. If no device platform data is given, try the DT device node. Make sure required hardware clocks and regulators are enabled while the firmware framebuffer is in use. The basic code has been taken from the simplefb driver and adapted to DRM. Clocks are released automatically via devres helpers. The drivers displays a console on simpledrm's framebuffer. The default framebuffer format is being used. v4: * disable simplefb if simpledrm has been selected (Maxime) v3: * add disable function that clears screen to black (Daniel) * set shadow buffering only for fbdev emulation * set platform-driver data during device creation v2: * rename driver to simpledrm * add dri-devel to MAINTAINERS entry * put native format first in primary-plane format list (Daniel) * inline simplekms_device_cleanup() (Daniel) * use helpers for shadow-buffered planes * fix whitespace errors * add Device Tree match table * clean-up parser wrappers * use strscpy() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> # fbdev support Acked-by: Maxime Ripard <maxime@cerno.tech> Tested-by: nerdopolis <bluescreen_avenger@verizon.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-5-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-6-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-7-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-8-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-9-tzimmermann@suse.de
2021-04-30 10:58:35 +00:00
#include <drm/drm_damage_helper.h>
#include <drm/drm_device.h>
#include <drm/drm_drv.h>
#include <drm/drm_fbdev_generic.h>
drm: Add simpledrm driver The simpledrm driver is a DRM driver for simple-framebuffer framebuffers as provided by the kernel's boot code. This driver enables basic graphical output on many different graphics devices that are provided by the platform (e.g., EFI, VESA, embedded framebuffers). With the kernel's simple-framebuffer infrastructure, the kernel receives a pre-configured framebuffer from the system (i.e., firmware, boot loader). It creates a platform device to which simpledrm attaches. The system's framebuffer consists of a memory range, size and format. Based on these values, simpledrm creates a DRM devices. No actual modesetting is possible. A firmware framebuffer might also be specified via device-tree files. If no device platform data is given, try the DT device node. Make sure required hardware clocks and regulators are enabled while the firmware framebuffer is in use. The basic code has been taken from the simplefb driver and adapted to DRM. Clocks are released automatically via devres helpers. The drivers displays a console on simpledrm's framebuffer. The default framebuffer format is being used. v4: * disable simplefb if simpledrm has been selected (Maxime) v3: * add disable function that clears screen to black (Daniel) * set shadow buffering only for fbdev emulation * set platform-driver data during device creation v2: * rename driver to simpledrm * add dri-devel to MAINTAINERS entry * put native format first in primary-plane format list (Daniel) * inline simplekms_device_cleanup() (Daniel) * use helpers for shadow-buffered planes * fix whitespace errors * add Device Tree match table * clean-up parser wrappers * use strscpy() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> # fbdev support Acked-by: Maxime Ripard <maxime@cerno.tech> Tested-by: nerdopolis <bluescreen_avenger@verizon.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-5-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-6-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-7-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-8-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-9-tzimmermann@suse.de
2021-04-30 10:58:35 +00:00
#include <drm/drm_format_helper.h>
#include <drm/drm_gem_atomic_helper.h>
#include <drm/drm_gem_framebuffer_helper.h>
#include <drm/drm_gem_shmem_helper.h>
#include <drm/drm_managed.h>
#include <drm/drm_modeset_helper_vtables.h>
#include <drm/drm_plane_helper.h>
drm: Add simpledrm driver The simpledrm driver is a DRM driver for simple-framebuffer framebuffers as provided by the kernel's boot code. This driver enables basic graphical output on many different graphics devices that are provided by the platform (e.g., EFI, VESA, embedded framebuffers). With the kernel's simple-framebuffer infrastructure, the kernel receives a pre-configured framebuffer from the system (i.e., firmware, boot loader). It creates a platform device to which simpledrm attaches. The system's framebuffer consists of a memory range, size and format. Based on these values, simpledrm creates a DRM devices. No actual modesetting is possible. A firmware framebuffer might also be specified via device-tree files. If no device platform data is given, try the DT device node. Make sure required hardware clocks and regulators are enabled while the firmware framebuffer is in use. The basic code has been taken from the simplefb driver and adapted to DRM. Clocks are released automatically via devres helpers. The drivers displays a console on simpledrm's framebuffer. The default framebuffer format is being used. v4: * disable simplefb if simpledrm has been selected (Maxime) v3: * add disable function that clears screen to black (Daniel) * set shadow buffering only for fbdev emulation * set platform-driver data during device creation v2: * rename driver to simpledrm * add dri-devel to MAINTAINERS entry * put native format first in primary-plane format list (Daniel) * inline simplekms_device_cleanup() (Daniel) * use helpers for shadow-buffered planes * fix whitespace errors * add Device Tree match table * clean-up parser wrappers * use strscpy() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> # fbdev support Acked-by: Maxime Ripard <maxime@cerno.tech> Tested-by: nerdopolis <bluescreen_avenger@verizon.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-5-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-6-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-7-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-8-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-9-tzimmermann@suse.de
2021-04-30 10:58:35 +00:00
#include <drm/drm_probe_helper.h>
#define DRIVER_NAME "simpledrm"
#define DRIVER_DESC "DRM driver for simple-framebuffer platform devices"
#define DRIVER_DATE "20200625"
#define DRIVER_MAJOR 1
#define DRIVER_MINOR 0
/*
* Helpers for simplefb
*/
static int
simplefb_get_validated_int(struct drm_device *dev, const char *name,
uint32_t value)
{
if (value > INT_MAX) {
drm_err(dev, "simplefb: invalid framebuffer %s of %u\n",
name, value);
return -EINVAL;
}
return (int)value;
}
static int
simplefb_get_validated_int0(struct drm_device *dev, const char *name,
uint32_t value)
{
if (!value) {
drm_err(dev, "simplefb: invalid framebuffer %s of %u\n",
name, value);
return -EINVAL;
}
return simplefb_get_validated_int(dev, name, value);
}
static const struct drm_format_info *
simplefb_get_validated_format(struct drm_device *dev, const char *format_name)
{
static const struct simplefb_format formats[] = SIMPLEFB_FORMATS;
const struct simplefb_format *fmt = formats;
const struct simplefb_format *end = fmt + ARRAY_SIZE(formats);
const struct drm_format_info *info;
drm: Add simpledrm driver The simpledrm driver is a DRM driver for simple-framebuffer framebuffers as provided by the kernel's boot code. This driver enables basic graphical output on many different graphics devices that are provided by the platform (e.g., EFI, VESA, embedded framebuffers). With the kernel's simple-framebuffer infrastructure, the kernel receives a pre-configured framebuffer from the system (i.e., firmware, boot loader). It creates a platform device to which simpledrm attaches. The system's framebuffer consists of a memory range, size and format. Based on these values, simpledrm creates a DRM devices. No actual modesetting is possible. A firmware framebuffer might also be specified via device-tree files. If no device platform data is given, try the DT device node. Make sure required hardware clocks and regulators are enabled while the firmware framebuffer is in use. The basic code has been taken from the simplefb driver and adapted to DRM. Clocks are released automatically via devres helpers. The drivers displays a console on simpledrm's framebuffer. The default framebuffer format is being used. v4: * disable simplefb if simpledrm has been selected (Maxime) v3: * add disable function that clears screen to black (Daniel) * set shadow buffering only for fbdev emulation * set platform-driver data during device creation v2: * rename driver to simpledrm * add dri-devel to MAINTAINERS entry * put native format first in primary-plane format list (Daniel) * inline simplekms_device_cleanup() (Daniel) * use helpers for shadow-buffered planes * fix whitespace errors * add Device Tree match table * clean-up parser wrappers * use strscpy() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> # fbdev support Acked-by: Maxime Ripard <maxime@cerno.tech> Tested-by: nerdopolis <bluescreen_avenger@verizon.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-5-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-6-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-7-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-8-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-9-tzimmermann@suse.de
2021-04-30 10:58:35 +00:00
if (!format_name) {
drm_err(dev, "simplefb: missing framebuffer format\n");
return ERR_PTR(-EINVAL);
}
while (fmt < end) {
if (!strcmp(format_name, fmt->name)) {
info = drm_format_info(fmt->fourcc);
if (!info)
return ERR_PTR(-EINVAL);
return info;
}
drm: Add simpledrm driver The simpledrm driver is a DRM driver for simple-framebuffer framebuffers as provided by the kernel's boot code. This driver enables basic graphical output on many different graphics devices that are provided by the platform (e.g., EFI, VESA, embedded framebuffers). With the kernel's simple-framebuffer infrastructure, the kernel receives a pre-configured framebuffer from the system (i.e., firmware, boot loader). It creates a platform device to which simpledrm attaches. The system's framebuffer consists of a memory range, size and format. Based on these values, simpledrm creates a DRM devices. No actual modesetting is possible. A firmware framebuffer might also be specified via device-tree files. If no device platform data is given, try the DT device node. Make sure required hardware clocks and regulators are enabled while the firmware framebuffer is in use. The basic code has been taken from the simplefb driver and adapted to DRM. Clocks are released automatically via devres helpers. The drivers displays a console on simpledrm's framebuffer. The default framebuffer format is being used. v4: * disable simplefb if simpledrm has been selected (Maxime) v3: * add disable function that clears screen to black (Daniel) * set shadow buffering only for fbdev emulation * set platform-driver data during device creation v2: * rename driver to simpledrm * add dri-devel to MAINTAINERS entry * put native format first in primary-plane format list (Daniel) * inline simplekms_device_cleanup() (Daniel) * use helpers for shadow-buffered planes * fix whitespace errors * add Device Tree match table * clean-up parser wrappers * use strscpy() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> # fbdev support Acked-by: Maxime Ripard <maxime@cerno.tech> Tested-by: nerdopolis <bluescreen_avenger@verizon.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-5-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-6-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-7-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-8-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-9-tzimmermann@suse.de
2021-04-30 10:58:35 +00:00
++fmt;
}
drm_err(dev, "simplefb: unknown framebuffer format %s\n",
format_name);
return ERR_PTR(-EINVAL);
}
static int
simplefb_get_width_pd(struct drm_device *dev,
const struct simplefb_platform_data *pd)
{
return simplefb_get_validated_int0(dev, "width", pd->width);
}
static int
simplefb_get_height_pd(struct drm_device *dev,
const struct simplefb_platform_data *pd)
{
return simplefb_get_validated_int0(dev, "height", pd->height);
}
static int
simplefb_get_stride_pd(struct drm_device *dev,
const struct simplefb_platform_data *pd)
{
return simplefb_get_validated_int(dev, "stride", pd->stride);
}
static const struct drm_format_info *
simplefb_get_format_pd(struct drm_device *dev,
const struct simplefb_platform_data *pd)
{
return simplefb_get_validated_format(dev, pd->format);
}
static int
simplefb_read_u32_of(struct drm_device *dev, struct device_node *of_node,
const char *name, u32 *value)
{
int ret = of_property_read_u32(of_node, name, value);
if (ret)
drm_err(dev, "simplefb: cannot parse framebuffer %s: error %d\n",
name, ret);
return ret;
}
static int
simplefb_read_string_of(struct drm_device *dev, struct device_node *of_node,
const char *name, const char **value)
{
int ret = of_property_read_string(of_node, name, value);
if (ret)
drm_err(dev, "simplefb: cannot parse framebuffer %s: error %d\n",
name, ret);
return ret;
}
static int
simplefb_get_width_of(struct drm_device *dev, struct device_node *of_node)
{
u32 width;
int ret = simplefb_read_u32_of(dev, of_node, "width", &width);
if (ret)
return ret;
return simplefb_get_validated_int0(dev, "width", width);
}
static int
simplefb_get_height_of(struct drm_device *dev, struct device_node *of_node)
{
u32 height;
int ret = simplefb_read_u32_of(dev, of_node, "height", &height);
if (ret)
return ret;
return simplefb_get_validated_int0(dev, "height", height);
}
static int
simplefb_get_stride_of(struct drm_device *dev, struct device_node *of_node)
{
u32 stride;
int ret = simplefb_read_u32_of(dev, of_node, "stride", &stride);
if (ret)
return ret;
return simplefb_get_validated_int(dev, "stride", stride);
}
static const struct drm_format_info *
simplefb_get_format_of(struct drm_device *dev, struct device_node *of_node)
{
const char *format;
int ret = simplefb_read_string_of(dev, of_node, "format", &format);
if (ret)
return ERR_PTR(ret);
return simplefb_get_validated_format(dev, format);
}
/*
* Simple Framebuffer device
*/
struct simpledrm_device {
struct drm_device dev;
/* clocks */
#if defined CONFIG_OF && defined CONFIG_COMMON_CLK
unsigned int clk_count;
struct clk **clks;
#endif
/* regulators */
#if defined CONFIG_OF && defined CONFIG_REGULATOR
unsigned int regulator_count;
struct regulator **regulators;
#endif
/* simplefb settings */
struct drm_display_mode mode;
const struct drm_format_info *format;
unsigned int pitch;
/* memory management */
void __iomem *screen_base;
/* modesetting */
uint32_t formats[8];
size_t nformats;
struct drm_plane primary_plane;
struct drm_crtc crtc;
struct drm_encoder encoder;
drm: Add simpledrm driver The simpledrm driver is a DRM driver for simple-framebuffer framebuffers as provided by the kernel's boot code. This driver enables basic graphical output on many different graphics devices that are provided by the platform (e.g., EFI, VESA, embedded framebuffers). With the kernel's simple-framebuffer infrastructure, the kernel receives a pre-configured framebuffer from the system (i.e., firmware, boot loader). It creates a platform device to which simpledrm attaches. The system's framebuffer consists of a memory range, size and format. Based on these values, simpledrm creates a DRM devices. No actual modesetting is possible. A firmware framebuffer might also be specified via device-tree files. If no device platform data is given, try the DT device node. Make sure required hardware clocks and regulators are enabled while the firmware framebuffer is in use. The basic code has been taken from the simplefb driver and adapted to DRM. Clocks are released automatically via devres helpers. The drivers displays a console on simpledrm's framebuffer. The default framebuffer format is being used. v4: * disable simplefb if simpledrm has been selected (Maxime) v3: * add disable function that clears screen to black (Daniel) * set shadow buffering only for fbdev emulation * set platform-driver data during device creation v2: * rename driver to simpledrm * add dri-devel to MAINTAINERS entry * put native format first in primary-plane format list (Daniel) * inline simplekms_device_cleanup() (Daniel) * use helpers for shadow-buffered planes * fix whitespace errors * add Device Tree match table * clean-up parser wrappers * use strscpy() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> # fbdev support Acked-by: Maxime Ripard <maxime@cerno.tech> Tested-by: nerdopolis <bluescreen_avenger@verizon.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-5-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-6-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-7-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-8-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-9-tzimmermann@suse.de
2021-04-30 10:58:35 +00:00
struct drm_connector connector;
};
static struct simpledrm_device *simpledrm_device_of_dev(struct drm_device *dev)
{
return container_of(dev, struct simpledrm_device, dev);
}
/*
* Hardware
*/
#if defined CONFIG_OF && defined CONFIG_COMMON_CLK
/*
* Clock handling code.
*
* Here we handle the clocks property of our "simple-framebuffer" dt node.
* This is necessary so that we can make sure that any clocks needed by
* the display engine that the bootloader set up for us (and for which it
* provided a simplefb dt node), stay up, for the life of the simplefb
* driver.
*
* When the driver unloads, we cleanly disable, and then release the clocks.
*
* We only complain about errors here, no action is taken as the most likely
* error can only happen due to a mismatch between the bootloader which set
* up simplefb, and the clock definitions in the device tree. Chances are
* that there are no adverse effects, and if there are, a clean teardown of
* the fb probe will not help us much either. So just complain and carry on,
* and hope that the user actually gets a working fb at the end of things.
*/
static void simpledrm_device_release_clocks(void *res)
{
struct simpledrm_device *sdev = simpledrm_device_of_dev(res);
unsigned int i;
for (i = 0; i < sdev->clk_count; ++i) {
if (sdev->clks[i]) {
clk_disable_unprepare(sdev->clks[i]);
clk_put(sdev->clks[i]);
}
}
}
static int simpledrm_device_init_clocks(struct simpledrm_device *sdev)
{
struct drm_device *dev = &sdev->dev;
struct platform_device *pdev = to_platform_device(dev->dev);
drm: Add simpledrm driver The simpledrm driver is a DRM driver for simple-framebuffer framebuffers as provided by the kernel's boot code. This driver enables basic graphical output on many different graphics devices that are provided by the platform (e.g., EFI, VESA, embedded framebuffers). With the kernel's simple-framebuffer infrastructure, the kernel receives a pre-configured framebuffer from the system (i.e., firmware, boot loader). It creates a platform device to which simpledrm attaches. The system's framebuffer consists of a memory range, size and format. Based on these values, simpledrm creates a DRM devices. No actual modesetting is possible. A firmware framebuffer might also be specified via device-tree files. If no device platform data is given, try the DT device node. Make sure required hardware clocks and regulators are enabled while the firmware framebuffer is in use. The basic code has been taken from the simplefb driver and adapted to DRM. Clocks are released automatically via devres helpers. The drivers displays a console on simpledrm's framebuffer. The default framebuffer format is being used. v4: * disable simplefb if simpledrm has been selected (Maxime) v3: * add disable function that clears screen to black (Daniel) * set shadow buffering only for fbdev emulation * set platform-driver data during device creation v2: * rename driver to simpledrm * add dri-devel to MAINTAINERS entry * put native format first in primary-plane format list (Daniel) * inline simplekms_device_cleanup() (Daniel) * use helpers for shadow-buffered planes * fix whitespace errors * add Device Tree match table * clean-up parser wrappers * use strscpy() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> # fbdev support Acked-by: Maxime Ripard <maxime@cerno.tech> Tested-by: nerdopolis <bluescreen_avenger@verizon.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-5-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-6-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-7-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-8-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-9-tzimmermann@suse.de
2021-04-30 10:58:35 +00:00
struct device_node *of_node = pdev->dev.of_node;
struct clk *clock;
unsigned int i;
int ret;
if (dev_get_platdata(&pdev->dev) || !of_node)
return 0;
sdev->clk_count = of_clk_get_parent_count(of_node);
if (!sdev->clk_count)
return 0;
sdev->clks = drmm_kzalloc(dev, sdev->clk_count * sizeof(sdev->clks[0]),
GFP_KERNEL);
if (!sdev->clks)
return -ENOMEM;
for (i = 0; i < sdev->clk_count; ++i) {
clock = of_clk_get(of_node, i);
if (IS_ERR(clock)) {
ret = PTR_ERR(clock);
if (ret == -EPROBE_DEFER)
goto err;
drm_err(dev, "clock %u not found: %d\n", i, ret);
continue;
}
ret = clk_prepare_enable(clock);
if (ret) {
drm_err(dev, "failed to enable clock %u: %d\n",
i, ret);
clk_put(clock);
continue;
drm: Add simpledrm driver The simpledrm driver is a DRM driver for simple-framebuffer framebuffers as provided by the kernel's boot code. This driver enables basic graphical output on many different graphics devices that are provided by the platform (e.g., EFI, VESA, embedded framebuffers). With the kernel's simple-framebuffer infrastructure, the kernel receives a pre-configured framebuffer from the system (i.e., firmware, boot loader). It creates a platform device to which simpledrm attaches. The system's framebuffer consists of a memory range, size and format. Based on these values, simpledrm creates a DRM devices. No actual modesetting is possible. A firmware framebuffer might also be specified via device-tree files. If no device platform data is given, try the DT device node. Make sure required hardware clocks and regulators are enabled while the firmware framebuffer is in use. The basic code has been taken from the simplefb driver and adapted to DRM. Clocks are released automatically via devres helpers. The drivers displays a console on simpledrm's framebuffer. The default framebuffer format is being used. v4: * disable simplefb if simpledrm has been selected (Maxime) v3: * add disable function that clears screen to black (Daniel) * set shadow buffering only for fbdev emulation * set platform-driver data during device creation v2: * rename driver to simpledrm * add dri-devel to MAINTAINERS entry * put native format first in primary-plane format list (Daniel) * inline simplekms_device_cleanup() (Daniel) * use helpers for shadow-buffered planes * fix whitespace errors * add Device Tree match table * clean-up parser wrappers * use strscpy() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> # fbdev support Acked-by: Maxime Ripard <maxime@cerno.tech> Tested-by: nerdopolis <bluescreen_avenger@verizon.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-5-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-6-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-7-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-8-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-9-tzimmermann@suse.de
2021-04-30 10:58:35 +00:00
}
sdev->clks[i] = clock;
}
return devm_add_action_or_reset(&pdev->dev,
simpledrm_device_release_clocks,
sdev);
err:
while (i) {
--i;
if (sdev->clks[i]) {
clk_disable_unprepare(sdev->clks[i]);
clk_put(sdev->clks[i]);
}
}
return ret;
}
#else
static int simpledrm_device_init_clocks(struct simpledrm_device *sdev)
{
return 0;
}
#endif
#if defined CONFIG_OF && defined CONFIG_REGULATOR
#define SUPPLY_SUFFIX "-supply"
/*
* Regulator handling code.
*
* Here we handle the num-supplies and vin*-supply properties of our
* "simple-framebuffer" dt node. This is necessary so that we can make sure
* that any regulators needed by the display hardware that the bootloader
* set up for us (and for which it provided a simplefb dt node), stay up,
* for the life of the simplefb driver.
*
* When the driver unloads, we cleanly disable, and then release the
* regulators.
*
* We only complain about errors here, no action is taken as the most likely
* error can only happen due to a mismatch between the bootloader which set
* up simplefb, and the regulator definitions in the device tree. Chances are
* that there are no adverse effects, and if there are, a clean teardown of
* the fb probe will not help us much either. So just complain and carry on,
* and hope that the user actually gets a working fb at the end of things.
*/
static void simpledrm_device_release_regulators(void *res)
{
struct simpledrm_device *sdev = simpledrm_device_of_dev(res);
unsigned int i;
for (i = 0; i < sdev->regulator_count; ++i) {
if (sdev->regulators[i]) {
regulator_disable(sdev->regulators[i]);
regulator_put(sdev->regulators[i]);
}
}
}
static int simpledrm_device_init_regulators(struct simpledrm_device *sdev)
{
struct drm_device *dev = &sdev->dev;
struct platform_device *pdev = to_platform_device(dev->dev);
drm: Add simpledrm driver The simpledrm driver is a DRM driver for simple-framebuffer framebuffers as provided by the kernel's boot code. This driver enables basic graphical output on many different graphics devices that are provided by the platform (e.g., EFI, VESA, embedded framebuffers). With the kernel's simple-framebuffer infrastructure, the kernel receives a pre-configured framebuffer from the system (i.e., firmware, boot loader). It creates a platform device to which simpledrm attaches. The system's framebuffer consists of a memory range, size and format. Based on these values, simpledrm creates a DRM devices. No actual modesetting is possible. A firmware framebuffer might also be specified via device-tree files. If no device platform data is given, try the DT device node. Make sure required hardware clocks and regulators are enabled while the firmware framebuffer is in use. The basic code has been taken from the simplefb driver and adapted to DRM. Clocks are released automatically via devres helpers. The drivers displays a console on simpledrm's framebuffer. The default framebuffer format is being used. v4: * disable simplefb if simpledrm has been selected (Maxime) v3: * add disable function that clears screen to black (Daniel) * set shadow buffering only for fbdev emulation * set platform-driver data during device creation v2: * rename driver to simpledrm * add dri-devel to MAINTAINERS entry * put native format first in primary-plane format list (Daniel) * inline simplekms_device_cleanup() (Daniel) * use helpers for shadow-buffered planes * fix whitespace errors * add Device Tree match table * clean-up parser wrappers * use strscpy() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> # fbdev support Acked-by: Maxime Ripard <maxime@cerno.tech> Tested-by: nerdopolis <bluescreen_avenger@verizon.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-5-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-6-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-7-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-8-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-9-tzimmermann@suse.de
2021-04-30 10:58:35 +00:00
struct device_node *of_node = pdev->dev.of_node;
struct property *prop;
struct regulator *regulator;
const char *p;
unsigned int count = 0, i = 0;
int ret;
if (dev_get_platdata(&pdev->dev) || !of_node)
return 0;
/* Count the number of regulator supplies */
for_each_property_of_node(of_node, prop) {
p = strstr(prop->name, SUPPLY_SUFFIX);
if (p && p != prop->name)
++count;
}
if (!count)
return 0;
sdev->regulators = drmm_kzalloc(dev,
count * sizeof(sdev->regulators[0]),
GFP_KERNEL);
if (!sdev->regulators)
return -ENOMEM;
for_each_property_of_node(of_node, prop) {
char name[32]; /* 32 is max size of property name */
size_t len;
p = strstr(prop->name, SUPPLY_SUFFIX);
if (!p || p == prop->name)
continue;
len = strlen(prop->name) - strlen(SUPPLY_SUFFIX) + 1;
strscpy(name, prop->name, min(sizeof(name), len));
regulator = regulator_get_optional(&pdev->dev, name);
if (IS_ERR(regulator)) {
ret = PTR_ERR(regulator);
if (ret == -EPROBE_DEFER)
goto err;
drm_err(dev, "regulator %s not found: %d\n",
name, ret);
continue;
}
ret = regulator_enable(regulator);
if (ret) {
drm_err(dev, "failed to enable regulator %u: %d\n",
i, ret);
regulator_put(regulator);
continue;
drm: Add simpledrm driver The simpledrm driver is a DRM driver for simple-framebuffer framebuffers as provided by the kernel's boot code. This driver enables basic graphical output on many different graphics devices that are provided by the platform (e.g., EFI, VESA, embedded framebuffers). With the kernel's simple-framebuffer infrastructure, the kernel receives a pre-configured framebuffer from the system (i.e., firmware, boot loader). It creates a platform device to which simpledrm attaches. The system's framebuffer consists of a memory range, size and format. Based on these values, simpledrm creates a DRM devices. No actual modesetting is possible. A firmware framebuffer might also be specified via device-tree files. If no device platform data is given, try the DT device node. Make sure required hardware clocks and regulators are enabled while the firmware framebuffer is in use. The basic code has been taken from the simplefb driver and adapted to DRM. Clocks are released automatically via devres helpers. The drivers displays a console on simpledrm's framebuffer. The default framebuffer format is being used. v4: * disable simplefb if simpledrm has been selected (Maxime) v3: * add disable function that clears screen to black (Daniel) * set shadow buffering only for fbdev emulation * set platform-driver data during device creation v2: * rename driver to simpledrm * add dri-devel to MAINTAINERS entry * put native format first in primary-plane format list (Daniel) * inline simplekms_device_cleanup() (Daniel) * use helpers for shadow-buffered planes * fix whitespace errors * add Device Tree match table * clean-up parser wrappers * use strscpy() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> # fbdev support Acked-by: Maxime Ripard <maxime@cerno.tech> Tested-by: nerdopolis <bluescreen_avenger@verizon.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-5-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-6-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-7-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-8-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-9-tzimmermann@suse.de
2021-04-30 10:58:35 +00:00
}
sdev->regulators[i++] = regulator;
}
sdev->regulator_count = i;
return devm_add_action_or_reset(&pdev->dev,
simpledrm_device_release_regulators,
sdev);
err:
while (i) {
--i;
if (sdev->regulators[i]) {
regulator_disable(sdev->regulators[i]);
regulator_put(sdev->regulators[i]);
}
}
return ret;
}
#else
static int simpledrm_device_init_regulators(struct simpledrm_device *sdev)
{
return 0;
}
#endif
/*
* Modesetting
*/
/*
* Support all formats of simplefb and maybe more; in order
* of preference. The display's update function will do any
* conversion necessary.
*
* TODO: Add blit helpers for remaining formats and uncomment
* constants.
*/
static const uint32_t simpledrm_primary_plane_formats[] = {
drm: Add simpledrm driver The simpledrm driver is a DRM driver for simple-framebuffer framebuffers as provided by the kernel's boot code. This driver enables basic graphical output on many different graphics devices that are provided by the platform (e.g., EFI, VESA, embedded framebuffers). With the kernel's simple-framebuffer infrastructure, the kernel receives a pre-configured framebuffer from the system (i.e., firmware, boot loader). It creates a platform device to which simpledrm attaches. The system's framebuffer consists of a memory range, size and format. Based on these values, simpledrm creates a DRM devices. No actual modesetting is possible. A firmware framebuffer might also be specified via device-tree files. If no device platform data is given, try the DT device node. Make sure required hardware clocks and regulators are enabled while the firmware framebuffer is in use. The basic code has been taken from the simplefb driver and adapted to DRM. Clocks are released automatically via devres helpers. The drivers displays a console on simpledrm's framebuffer. The default framebuffer format is being used. v4: * disable simplefb if simpledrm has been selected (Maxime) v3: * add disable function that clears screen to black (Daniel) * set shadow buffering only for fbdev emulation * set platform-driver data during device creation v2: * rename driver to simpledrm * add dri-devel to MAINTAINERS entry * put native format first in primary-plane format list (Daniel) * inline simplekms_device_cleanup() (Daniel) * use helpers for shadow-buffered planes * fix whitespace errors * add Device Tree match table * clean-up parser wrappers * use strscpy() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> # fbdev support Acked-by: Maxime Ripard <maxime@cerno.tech> Tested-by: nerdopolis <bluescreen_avenger@verizon.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-5-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-6-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-7-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-8-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-9-tzimmermann@suse.de
2021-04-30 10:58:35 +00:00
DRM_FORMAT_XRGB8888,
DRM_FORMAT_ARGB8888,
DRM_FORMAT_RGB565,
//DRM_FORMAT_XRGB1555,
//DRM_FORMAT_ARGB1555,
DRM_FORMAT_RGB888,
DRM_FORMAT_XRGB2101010,
DRM_FORMAT_ARGB2101010,
drm: Add simpledrm driver The simpledrm driver is a DRM driver for simple-framebuffer framebuffers as provided by the kernel's boot code. This driver enables basic graphical output on many different graphics devices that are provided by the platform (e.g., EFI, VESA, embedded framebuffers). With the kernel's simple-framebuffer infrastructure, the kernel receives a pre-configured framebuffer from the system (i.e., firmware, boot loader). It creates a platform device to which simpledrm attaches. The system's framebuffer consists of a memory range, size and format. Based on these values, simpledrm creates a DRM devices. No actual modesetting is possible. A firmware framebuffer might also be specified via device-tree files. If no device platform data is given, try the DT device node. Make sure required hardware clocks and regulators are enabled while the firmware framebuffer is in use. The basic code has been taken from the simplefb driver and adapted to DRM. Clocks are released automatically via devres helpers. The drivers displays a console on simpledrm's framebuffer. The default framebuffer format is being used. v4: * disable simplefb if simpledrm has been selected (Maxime) v3: * add disable function that clears screen to black (Daniel) * set shadow buffering only for fbdev emulation * set platform-driver data during device creation v2: * rename driver to simpledrm * add dri-devel to MAINTAINERS entry * put native format first in primary-plane format list (Daniel) * inline simplekms_device_cleanup() (Daniel) * use helpers for shadow-buffered planes * fix whitespace errors * add Device Tree match table * clean-up parser wrappers * use strscpy() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> # fbdev support Acked-by: Maxime Ripard <maxime@cerno.tech> Tested-by: nerdopolis <bluescreen_avenger@verizon.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-5-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-6-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-7-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-8-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-9-tzimmermann@suse.de
2021-04-30 10:58:35 +00:00
};
static const uint64_t simpledrm_primary_plane_format_modifiers[] = {
drm: Add simpledrm driver The simpledrm driver is a DRM driver for simple-framebuffer framebuffers as provided by the kernel's boot code. This driver enables basic graphical output on many different graphics devices that are provided by the platform (e.g., EFI, VESA, embedded framebuffers). With the kernel's simple-framebuffer infrastructure, the kernel receives a pre-configured framebuffer from the system (i.e., firmware, boot loader). It creates a platform device to which simpledrm attaches. The system's framebuffer consists of a memory range, size and format. Based on these values, simpledrm creates a DRM devices. No actual modesetting is possible. A firmware framebuffer might also be specified via device-tree files. If no device platform data is given, try the DT device node. Make sure required hardware clocks and regulators are enabled while the firmware framebuffer is in use. The basic code has been taken from the simplefb driver and adapted to DRM. Clocks are released automatically via devres helpers. The drivers displays a console on simpledrm's framebuffer. The default framebuffer format is being used. v4: * disable simplefb if simpledrm has been selected (Maxime) v3: * add disable function that clears screen to black (Daniel) * set shadow buffering only for fbdev emulation * set platform-driver data during device creation v2: * rename driver to simpledrm * add dri-devel to MAINTAINERS entry * put native format first in primary-plane format list (Daniel) * inline simplekms_device_cleanup() (Daniel) * use helpers for shadow-buffered planes * fix whitespace errors * add Device Tree match table * clean-up parser wrappers * use strscpy() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> # fbdev support Acked-by: Maxime Ripard <maxime@cerno.tech> Tested-by: nerdopolis <bluescreen_avenger@verizon.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-5-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-6-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-7-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-8-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-9-tzimmermann@suse.de
2021-04-30 10:58:35 +00:00
DRM_FORMAT_MOD_LINEAR,
DRM_FORMAT_MOD_INVALID
};
static void simpledrm_primary_plane_helper_atomic_update(struct drm_plane *plane,
struct drm_atomic_state *state)
drm: Add simpledrm driver The simpledrm driver is a DRM driver for simple-framebuffer framebuffers as provided by the kernel's boot code. This driver enables basic graphical output on many different graphics devices that are provided by the platform (e.g., EFI, VESA, embedded framebuffers). With the kernel's simple-framebuffer infrastructure, the kernel receives a pre-configured framebuffer from the system (i.e., firmware, boot loader). It creates a platform device to which simpledrm attaches. The system's framebuffer consists of a memory range, size and format. Based on these values, simpledrm creates a DRM devices. No actual modesetting is possible. A firmware framebuffer might also be specified via device-tree files. If no device platform data is given, try the DT device node. Make sure required hardware clocks and regulators are enabled while the firmware framebuffer is in use. The basic code has been taken from the simplefb driver and adapted to DRM. Clocks are released automatically via devres helpers. The drivers displays a console on simpledrm's framebuffer. The default framebuffer format is being used. v4: * disable simplefb if simpledrm has been selected (Maxime) v3: * add disable function that clears screen to black (Daniel) * set shadow buffering only for fbdev emulation * set platform-driver data during device creation v2: * rename driver to simpledrm * add dri-devel to MAINTAINERS entry * put native format first in primary-plane format list (Daniel) * inline simplekms_device_cleanup() (Daniel) * use helpers for shadow-buffered planes * fix whitespace errors * add Device Tree match table * clean-up parser wrappers * use strscpy() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> # fbdev support Acked-by: Maxime Ripard <maxime@cerno.tech> Tested-by: nerdopolis <bluescreen_avenger@verizon.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-5-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-6-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-7-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-8-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-9-tzimmermann@suse.de
2021-04-30 10:58:35 +00:00
{
struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane);
struct drm_plane_state *old_plane_state = drm_atomic_get_old_plane_state(state, plane);
drm: Add simpledrm driver The simpledrm driver is a DRM driver for simple-framebuffer framebuffers as provided by the kernel's boot code. This driver enables basic graphical output on many different graphics devices that are provided by the platform (e.g., EFI, VESA, embedded framebuffers). With the kernel's simple-framebuffer infrastructure, the kernel receives a pre-configured framebuffer from the system (i.e., firmware, boot loader). It creates a platform device to which simpledrm attaches. The system's framebuffer consists of a memory range, size and format. Based on these values, simpledrm creates a DRM devices. No actual modesetting is possible. A firmware framebuffer might also be specified via device-tree files. If no device platform data is given, try the DT device node. Make sure required hardware clocks and regulators are enabled while the firmware framebuffer is in use. The basic code has been taken from the simplefb driver and adapted to DRM. Clocks are released automatically via devres helpers. The drivers displays a console on simpledrm's framebuffer. The default framebuffer format is being used. v4: * disable simplefb if simpledrm has been selected (Maxime) v3: * add disable function that clears screen to black (Daniel) * set shadow buffering only for fbdev emulation * set platform-driver data during device creation v2: * rename driver to simpledrm * add dri-devel to MAINTAINERS entry * put native format first in primary-plane format list (Daniel) * inline simplekms_device_cleanup() (Daniel) * use helpers for shadow-buffered planes * fix whitespace errors * add Device Tree match table * clean-up parser wrappers * use strscpy() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> # fbdev support Acked-by: Maxime Ripard <maxime@cerno.tech> Tested-by: nerdopolis <bluescreen_avenger@verizon.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-5-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-6-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-7-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-8-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-9-tzimmermann@suse.de
2021-04-30 10:58:35 +00:00
struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(plane_state);
struct drm_framebuffer *fb = plane_state->fb;
struct drm_device *dev = plane->dev;
struct simpledrm_device *sdev = simpledrm_device_of_dev(dev);
struct drm_atomic_helper_damage_iter iter;
struct drm_rect damage;
int ret, idx;
drm: Add simpledrm driver The simpledrm driver is a DRM driver for simple-framebuffer framebuffers as provided by the kernel's boot code. This driver enables basic graphical output on many different graphics devices that are provided by the platform (e.g., EFI, VESA, embedded framebuffers). With the kernel's simple-framebuffer infrastructure, the kernel receives a pre-configured framebuffer from the system (i.e., firmware, boot loader). It creates a platform device to which simpledrm attaches. The system's framebuffer consists of a memory range, size and format. Based on these values, simpledrm creates a DRM devices. No actual modesetting is possible. A firmware framebuffer might also be specified via device-tree files. If no device platform data is given, try the DT device node. Make sure required hardware clocks and regulators are enabled while the firmware framebuffer is in use. The basic code has been taken from the simplefb driver and adapted to DRM. Clocks are released automatically via devres helpers. The drivers displays a console on simpledrm's framebuffer. The default framebuffer format is being used. v4: * disable simplefb if simpledrm has been selected (Maxime) v3: * add disable function that clears screen to black (Daniel) * set shadow buffering only for fbdev emulation * set platform-driver data during device creation v2: * rename driver to simpledrm * add dri-devel to MAINTAINERS entry * put native format first in primary-plane format list (Daniel) * inline simplekms_device_cleanup() (Daniel) * use helpers for shadow-buffered planes * fix whitespace errors * add Device Tree match table * clean-up parser wrappers * use strscpy() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> # fbdev support Acked-by: Maxime Ripard <maxime@cerno.tech> Tested-by: nerdopolis <bluescreen_avenger@verizon.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-5-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-6-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-7-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-8-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-9-tzimmermann@suse.de
2021-04-30 10:58:35 +00:00
ret = drm_gem_fb_begin_cpu_access(fb, DMA_FROM_DEVICE);
if (ret)
return;
if (!drm_dev_enter(dev, &idx))
goto out_drm_gem_fb_end_cpu_access;
drm_atomic_helper_damage_iter_init(&iter, old_plane_state, plane_state);
drm_atomic_for_each_plane_damage(&iter, &damage) {
struct iosys_map dst = IOSYS_MAP_INIT_VADDR(sdev->screen_base);
struct drm_rect dst_clip = plane_state->dst;
if (!drm_rect_intersect(&dst_clip, &damage))
continue;
iosys_map_incr(&dst, drm_fb_clip_offset(sdev->pitch, sdev->format, &dst_clip));
drm_fb_blit(&dst, &sdev->pitch, sdev->format->format, shadow_plane_state->data, fb,
&damage);
}
drm_dev_exit(idx);
out_drm_gem_fb_end_cpu_access:
drm_gem_fb_end_cpu_access(fb, DMA_FROM_DEVICE);
drm: Add simpledrm driver The simpledrm driver is a DRM driver for simple-framebuffer framebuffers as provided by the kernel's boot code. This driver enables basic graphical output on many different graphics devices that are provided by the platform (e.g., EFI, VESA, embedded framebuffers). With the kernel's simple-framebuffer infrastructure, the kernel receives a pre-configured framebuffer from the system (i.e., firmware, boot loader). It creates a platform device to which simpledrm attaches. The system's framebuffer consists of a memory range, size and format. Based on these values, simpledrm creates a DRM devices. No actual modesetting is possible. A firmware framebuffer might also be specified via device-tree files. If no device platform data is given, try the DT device node. Make sure required hardware clocks and regulators are enabled while the firmware framebuffer is in use. The basic code has been taken from the simplefb driver and adapted to DRM. Clocks are released automatically via devres helpers. The drivers displays a console on simpledrm's framebuffer. The default framebuffer format is being used. v4: * disable simplefb if simpledrm has been selected (Maxime) v3: * add disable function that clears screen to black (Daniel) * set shadow buffering only for fbdev emulation * set platform-driver data during device creation v2: * rename driver to simpledrm * add dri-devel to MAINTAINERS entry * put native format first in primary-plane format list (Daniel) * inline simplekms_device_cleanup() (Daniel) * use helpers for shadow-buffered planes * fix whitespace errors * add Device Tree match table * clean-up parser wrappers * use strscpy() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> # fbdev support Acked-by: Maxime Ripard <maxime@cerno.tech> Tested-by: nerdopolis <bluescreen_avenger@verizon.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-5-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-6-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-7-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-8-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-9-tzimmermann@suse.de
2021-04-30 10:58:35 +00:00
}
static void simpledrm_primary_plane_helper_atomic_disable(struct drm_plane *plane,
struct drm_atomic_state *state)
drm: Add simpledrm driver The simpledrm driver is a DRM driver for simple-framebuffer framebuffers as provided by the kernel's boot code. This driver enables basic graphical output on many different graphics devices that are provided by the platform (e.g., EFI, VESA, embedded framebuffers). With the kernel's simple-framebuffer infrastructure, the kernel receives a pre-configured framebuffer from the system (i.e., firmware, boot loader). It creates a platform device to which simpledrm attaches. The system's framebuffer consists of a memory range, size and format. Based on these values, simpledrm creates a DRM devices. No actual modesetting is possible. A firmware framebuffer might also be specified via device-tree files. If no device platform data is given, try the DT device node. Make sure required hardware clocks and regulators are enabled while the firmware framebuffer is in use. The basic code has been taken from the simplefb driver and adapted to DRM. Clocks are released automatically via devres helpers. The drivers displays a console on simpledrm's framebuffer. The default framebuffer format is being used. v4: * disable simplefb if simpledrm has been selected (Maxime) v3: * add disable function that clears screen to black (Daniel) * set shadow buffering only for fbdev emulation * set platform-driver data during device creation v2: * rename driver to simpledrm * add dri-devel to MAINTAINERS entry * put native format first in primary-plane format list (Daniel) * inline simplekms_device_cleanup() (Daniel) * use helpers for shadow-buffered planes * fix whitespace errors * add Device Tree match table * clean-up parser wrappers * use strscpy() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> # fbdev support Acked-by: Maxime Ripard <maxime@cerno.tech> Tested-by: nerdopolis <bluescreen_avenger@verizon.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-5-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-6-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-7-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-8-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-9-tzimmermann@suse.de
2021-04-30 10:58:35 +00:00
{
struct drm_device *dev = plane->dev;
struct simpledrm_device *sdev = simpledrm_device_of_dev(dev);
drm: Add simpledrm driver The simpledrm driver is a DRM driver for simple-framebuffer framebuffers as provided by the kernel's boot code. This driver enables basic graphical output on many different graphics devices that are provided by the platform (e.g., EFI, VESA, embedded framebuffers). With the kernel's simple-framebuffer infrastructure, the kernel receives a pre-configured framebuffer from the system (i.e., firmware, boot loader). It creates a platform device to which simpledrm attaches. The system's framebuffer consists of a memory range, size and format. Based on these values, simpledrm creates a DRM devices. No actual modesetting is possible. A firmware framebuffer might also be specified via device-tree files. If no device platform data is given, try the DT device node. Make sure required hardware clocks and regulators are enabled while the firmware framebuffer is in use. The basic code has been taken from the simplefb driver and adapted to DRM. Clocks are released automatically via devres helpers. The drivers displays a console on simpledrm's framebuffer. The default framebuffer format is being used. v4: * disable simplefb if simpledrm has been selected (Maxime) v3: * add disable function that clears screen to black (Daniel) * set shadow buffering only for fbdev emulation * set platform-driver data during device creation v2: * rename driver to simpledrm * add dri-devel to MAINTAINERS entry * put native format first in primary-plane format list (Daniel) * inline simplekms_device_cleanup() (Daniel) * use helpers for shadow-buffered planes * fix whitespace errors * add Device Tree match table * clean-up parser wrappers * use strscpy() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> # fbdev support Acked-by: Maxime Ripard <maxime@cerno.tech> Tested-by: nerdopolis <bluescreen_avenger@verizon.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-5-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-6-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-7-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-8-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-9-tzimmermann@suse.de
2021-04-30 10:58:35 +00:00
int idx;
if (!drm_dev_enter(dev, &idx))
return;
/* Clear screen to black if disabled */
memset_io(sdev->screen_base, 0, sdev->pitch * sdev->mode.vdisplay);
drm_dev_exit(idx);
}
static const struct drm_plane_helper_funcs simpledrm_primary_plane_helper_funcs = {
DRM_GEM_SHADOW_PLANE_HELPER_FUNCS,
.atomic_check = drm_plane_helper_atomic_check,
.atomic_update = simpledrm_primary_plane_helper_atomic_update,
.atomic_disable = simpledrm_primary_plane_helper_atomic_disable,
};
static const struct drm_plane_funcs simpledrm_primary_plane_funcs = {
.update_plane = drm_atomic_helper_update_plane,
.disable_plane = drm_atomic_helper_disable_plane,
.destroy = drm_plane_cleanup,
DRM_GEM_SHADOW_PLANE_FUNCS,
};
static enum drm_mode_status simpledrm_crtc_helper_mode_valid(struct drm_crtc *crtc,
const struct drm_display_mode *mode)
drm: Add simpledrm driver The simpledrm driver is a DRM driver for simple-framebuffer framebuffers as provided by the kernel's boot code. This driver enables basic graphical output on many different graphics devices that are provided by the platform (e.g., EFI, VESA, embedded framebuffers). With the kernel's simple-framebuffer infrastructure, the kernel receives a pre-configured framebuffer from the system (i.e., firmware, boot loader). It creates a platform device to which simpledrm attaches. The system's framebuffer consists of a memory range, size and format. Based on these values, simpledrm creates a DRM devices. No actual modesetting is possible. A firmware framebuffer might also be specified via device-tree files. If no device platform data is given, try the DT device node. Make sure required hardware clocks and regulators are enabled while the firmware framebuffer is in use. The basic code has been taken from the simplefb driver and adapted to DRM. Clocks are released automatically via devres helpers. The drivers displays a console on simpledrm's framebuffer. The default framebuffer format is being used. v4: * disable simplefb if simpledrm has been selected (Maxime) v3: * add disable function that clears screen to black (Daniel) * set shadow buffering only for fbdev emulation * set platform-driver data during device creation v2: * rename driver to simpledrm * add dri-devel to MAINTAINERS entry * put native format first in primary-plane format list (Daniel) * inline simplekms_device_cleanup() (Daniel) * use helpers for shadow-buffered planes * fix whitespace errors * add Device Tree match table * clean-up parser wrappers * use strscpy() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> # fbdev support Acked-by: Maxime Ripard <maxime@cerno.tech> Tested-by: nerdopolis <bluescreen_avenger@verizon.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-5-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-6-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-7-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-8-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-9-tzimmermann@suse.de
2021-04-30 10:58:35 +00:00
{
struct simpledrm_device *sdev = simpledrm_device_of_dev(crtc->dev);
drm: Add simpledrm driver The simpledrm driver is a DRM driver for simple-framebuffer framebuffers as provided by the kernel's boot code. This driver enables basic graphical output on many different graphics devices that are provided by the platform (e.g., EFI, VESA, embedded framebuffers). With the kernel's simple-framebuffer infrastructure, the kernel receives a pre-configured framebuffer from the system (i.e., firmware, boot loader). It creates a platform device to which simpledrm attaches. The system's framebuffer consists of a memory range, size and format. Based on these values, simpledrm creates a DRM devices. No actual modesetting is possible. A firmware framebuffer might also be specified via device-tree files. If no device platform data is given, try the DT device node. Make sure required hardware clocks and regulators are enabled while the firmware framebuffer is in use. The basic code has been taken from the simplefb driver and adapted to DRM. Clocks are released automatically via devres helpers. The drivers displays a console on simpledrm's framebuffer. The default framebuffer format is being used. v4: * disable simplefb if simpledrm has been selected (Maxime) v3: * add disable function that clears screen to black (Daniel) * set shadow buffering only for fbdev emulation * set platform-driver data during device creation v2: * rename driver to simpledrm * add dri-devel to MAINTAINERS entry * put native format first in primary-plane format list (Daniel) * inline simplekms_device_cleanup() (Daniel) * use helpers for shadow-buffered planes * fix whitespace errors * add Device Tree match table * clean-up parser wrappers * use strscpy() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> # fbdev support Acked-by: Maxime Ripard <maxime@cerno.tech> Tested-by: nerdopolis <bluescreen_avenger@verizon.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-5-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-6-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-7-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-8-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-9-tzimmermann@suse.de
2021-04-30 10:58:35 +00:00
return drm_crtc_helper_mode_valid_fixed(crtc, mode, &sdev->mode);
}
/*
* The CRTC is always enabled. Screen updates are performed by
* the primary plane's atomic_update function. Disabling clears
* the screen in the primary plane's atomic_disable function.
*/
static const struct drm_crtc_helper_funcs simpledrm_crtc_helper_funcs = {
.mode_valid = simpledrm_crtc_helper_mode_valid,
.atomic_check = drm_crtc_helper_atomic_check,
};
static const struct drm_crtc_funcs simpledrm_crtc_funcs = {
.reset = drm_atomic_helper_crtc_reset,
.destroy = drm_crtc_cleanup,
.set_config = drm_atomic_helper_set_config,
.page_flip = drm_atomic_helper_page_flip,
.atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
};
static const struct drm_encoder_funcs simpledrm_encoder_funcs = {
.destroy = drm_encoder_cleanup,
};
static int simpledrm_connector_helper_get_modes(struct drm_connector *connector)
{
struct simpledrm_device *sdev = simpledrm_device_of_dev(connector->dev);
return drm_connector_helper_get_modes_fixed(connector, &sdev->mode);
drm: Add simpledrm driver The simpledrm driver is a DRM driver for simple-framebuffer framebuffers as provided by the kernel's boot code. This driver enables basic graphical output on many different graphics devices that are provided by the platform (e.g., EFI, VESA, embedded framebuffers). With the kernel's simple-framebuffer infrastructure, the kernel receives a pre-configured framebuffer from the system (i.e., firmware, boot loader). It creates a platform device to which simpledrm attaches. The system's framebuffer consists of a memory range, size and format. Based on these values, simpledrm creates a DRM devices. No actual modesetting is possible. A firmware framebuffer might also be specified via device-tree files. If no device platform data is given, try the DT device node. Make sure required hardware clocks and regulators are enabled while the firmware framebuffer is in use. The basic code has been taken from the simplefb driver and adapted to DRM. Clocks are released automatically via devres helpers. The drivers displays a console on simpledrm's framebuffer. The default framebuffer format is being used. v4: * disable simplefb if simpledrm has been selected (Maxime) v3: * add disable function that clears screen to black (Daniel) * set shadow buffering only for fbdev emulation * set platform-driver data during device creation v2: * rename driver to simpledrm * add dri-devel to MAINTAINERS entry * put native format first in primary-plane format list (Daniel) * inline simplekms_device_cleanup() (Daniel) * use helpers for shadow-buffered planes * fix whitespace errors * add Device Tree match table * clean-up parser wrappers * use strscpy() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> # fbdev support Acked-by: Maxime Ripard <maxime@cerno.tech> Tested-by: nerdopolis <bluescreen_avenger@verizon.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-5-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-6-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-7-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-8-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-9-tzimmermann@suse.de
2021-04-30 10:58:35 +00:00
}
static const struct drm_connector_helper_funcs simpledrm_connector_helper_funcs = {
.get_modes = simpledrm_connector_helper_get_modes,
};
static const struct drm_connector_funcs simpledrm_connector_funcs = {
.reset = drm_atomic_helper_connector_reset,
.fill_modes = drm_helper_probe_single_connector_modes,
.destroy = drm_connector_cleanup,
.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
drm: Add simpledrm driver The simpledrm driver is a DRM driver for simple-framebuffer framebuffers as provided by the kernel's boot code. This driver enables basic graphical output on many different graphics devices that are provided by the platform (e.g., EFI, VESA, embedded framebuffers). With the kernel's simple-framebuffer infrastructure, the kernel receives a pre-configured framebuffer from the system (i.e., firmware, boot loader). It creates a platform device to which simpledrm attaches. The system's framebuffer consists of a memory range, size and format. Based on these values, simpledrm creates a DRM devices. No actual modesetting is possible. A firmware framebuffer might also be specified via device-tree files. If no device platform data is given, try the DT device node. Make sure required hardware clocks and regulators are enabled while the firmware framebuffer is in use. The basic code has been taken from the simplefb driver and adapted to DRM. Clocks are released automatically via devres helpers. The drivers displays a console on simpledrm's framebuffer. The default framebuffer format is being used. v4: * disable simplefb if simpledrm has been selected (Maxime) v3: * add disable function that clears screen to black (Daniel) * set shadow buffering only for fbdev emulation * set platform-driver data during device creation v2: * rename driver to simpledrm * add dri-devel to MAINTAINERS entry * put native format first in primary-plane format list (Daniel) * inline simplekms_device_cleanup() (Daniel) * use helpers for shadow-buffered planes * fix whitespace errors * add Device Tree match table * clean-up parser wrappers * use strscpy() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> # fbdev support Acked-by: Maxime Ripard <maxime@cerno.tech> Tested-by: nerdopolis <bluescreen_avenger@verizon.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-5-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-6-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-7-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-8-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-9-tzimmermann@suse.de
2021-04-30 10:58:35 +00:00
};
static const struct drm_mode_config_funcs simpledrm_mode_config_funcs = {
.fb_create = drm_gem_fb_create_with_dirty,
.atomic_check = drm_atomic_helper_check,
.atomic_commit = drm_atomic_helper_commit,
};
/*
* Init / Cleanup
*/
static struct drm_display_mode simpledrm_mode(unsigned int width,
unsigned int height)
{
/*
* Assume a monitor resolution of 96 dpi to
* get a somewhat reasonable screen size.
*/
const struct drm_display_mode mode = {
DRM_MODE_INIT(60, width, height,
DRM_MODE_RES_MM(width, 96ul),
DRM_MODE_RES_MM(height, 96ul))
};
return mode;
}
static struct simpledrm_device *simpledrm_device_create(struct drm_driver *drv,
struct platform_device *pdev)
drm: Add simpledrm driver The simpledrm driver is a DRM driver for simple-framebuffer framebuffers as provided by the kernel's boot code. This driver enables basic graphical output on many different graphics devices that are provided by the platform (e.g., EFI, VESA, embedded framebuffers). With the kernel's simple-framebuffer infrastructure, the kernel receives a pre-configured framebuffer from the system (i.e., firmware, boot loader). It creates a platform device to which simpledrm attaches. The system's framebuffer consists of a memory range, size and format. Based on these values, simpledrm creates a DRM devices. No actual modesetting is possible. A firmware framebuffer might also be specified via device-tree files. If no device platform data is given, try the DT device node. Make sure required hardware clocks and regulators are enabled while the firmware framebuffer is in use. The basic code has been taken from the simplefb driver and adapted to DRM. Clocks are released automatically via devres helpers. The drivers displays a console on simpledrm's framebuffer. The default framebuffer format is being used. v4: * disable simplefb if simpledrm has been selected (Maxime) v3: * add disable function that clears screen to black (Daniel) * set shadow buffering only for fbdev emulation * set platform-driver data during device creation v2: * rename driver to simpledrm * add dri-devel to MAINTAINERS entry * put native format first in primary-plane format list (Daniel) * inline simplekms_device_cleanup() (Daniel) * use helpers for shadow-buffered planes * fix whitespace errors * add Device Tree match table * clean-up parser wrappers * use strscpy() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> # fbdev support Acked-by: Maxime Ripard <maxime@cerno.tech> Tested-by: nerdopolis <bluescreen_avenger@verizon.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-5-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-6-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-7-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-8-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-9-tzimmermann@suse.de
2021-04-30 10:58:35 +00:00
{
const struct simplefb_platform_data *pd = dev_get_platdata(&pdev->dev);
struct device_node *of_node = pdev->dev.of_node;
struct simpledrm_device *sdev;
struct drm_device *dev;
int width, height, stride;
const struct drm_format_info *format;
struct resource *res, *mem;
void __iomem *screen_base;
struct drm_plane *primary_plane;
struct drm_crtc *crtc;
struct drm_encoder *encoder;
struct drm_connector *connector;
unsigned long max_width, max_height;
drm: Add simpledrm driver The simpledrm driver is a DRM driver for simple-framebuffer framebuffers as provided by the kernel's boot code. This driver enables basic graphical output on many different graphics devices that are provided by the platform (e.g., EFI, VESA, embedded framebuffers). With the kernel's simple-framebuffer infrastructure, the kernel receives a pre-configured framebuffer from the system (i.e., firmware, boot loader). It creates a platform device to which simpledrm attaches. The system's framebuffer consists of a memory range, size and format. Based on these values, simpledrm creates a DRM devices. No actual modesetting is possible. A firmware framebuffer might also be specified via device-tree files. If no device platform data is given, try the DT device node. Make sure required hardware clocks and regulators are enabled while the firmware framebuffer is in use. The basic code has been taken from the simplefb driver and adapted to DRM. Clocks are released automatically via devres helpers. The drivers displays a console on simpledrm's framebuffer. The default framebuffer format is being used. v4: * disable simplefb if simpledrm has been selected (Maxime) v3: * add disable function that clears screen to black (Daniel) * set shadow buffering only for fbdev emulation * set platform-driver data during device creation v2: * rename driver to simpledrm * add dri-devel to MAINTAINERS entry * put native format first in primary-plane format list (Daniel) * inline simplekms_device_cleanup() (Daniel) * use helpers for shadow-buffered planes * fix whitespace errors * add Device Tree match table * clean-up parser wrappers * use strscpy() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> # fbdev support Acked-by: Maxime Ripard <maxime@cerno.tech> Tested-by: nerdopolis <bluescreen_avenger@verizon.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-5-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-6-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-7-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-8-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-9-tzimmermann@suse.de
2021-04-30 10:58:35 +00:00
size_t nformats;
int ret;
sdev = devm_drm_dev_alloc(&pdev->dev, drv, struct simpledrm_device, dev);
if (IS_ERR(sdev))
return ERR_CAST(sdev);
dev = &sdev->dev;
platform_set_drvdata(pdev, sdev);
/*
* Hardware settings
*/
ret = simpledrm_device_init_clocks(sdev);
if (ret)
return ERR_PTR(ret);
ret = simpledrm_device_init_regulators(sdev);
if (ret)
return ERR_PTR(ret);
if (pd) {
width = simplefb_get_width_pd(dev, pd);
if (width < 0)
return ERR_PTR(width);
height = simplefb_get_height_pd(dev, pd);
if (height < 0)
return ERR_PTR(height);
stride = simplefb_get_stride_pd(dev, pd);
if (stride < 0)
return ERR_PTR(stride);
format = simplefb_get_format_pd(dev, pd);
if (IS_ERR(format))
return ERR_CAST(format);
} else if (of_node) {
width = simplefb_get_width_of(dev, of_node);
if (width < 0)
return ERR_PTR(width);
height = simplefb_get_height_of(dev, of_node);
if (height < 0)
return ERR_PTR(height);
stride = simplefb_get_stride_of(dev, of_node);
if (stride < 0)
return ERR_PTR(stride);
format = simplefb_get_format_of(dev, of_node);
if (IS_ERR(format))
return ERR_CAST(format);
} else {
drm_err(dev, "no simplefb configuration found\n");
return ERR_PTR(-ENODEV);
}
if (!stride) {
stride = drm_format_info_min_pitch(format, 0, width);
if (drm_WARN_ON(dev, !stride))
return ERR_PTR(-EINVAL);
}
sdev->mode = simpledrm_mode(width, height);
sdev->format = format;
sdev->pitch = stride;
drm_dbg(dev, "display mode={" DRM_MODE_FMT "}\n", DRM_MODE_ARG(&sdev->mode));
drm_dbg(dev, "framebuffer format=%p4cc, size=%dx%d, stride=%d byte\n",
&format->format, width, height, stride);
/*
* Memory management
*/
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
return ERR_PTR(-EINVAL);
ret = devm_aperture_acquire_from_firmware(dev, res->start, resource_size(res));
if (ret) {
drm_err(dev, "could not acquire memory range %pr: error %d\n", res, ret);
return ERR_PTR(ret);
}
mem = devm_request_mem_region(&pdev->dev, res->start, resource_size(res), drv->name);
if (!mem) {
/*
* We cannot make this fatal. Sometimes this comes from magic
* spaces our resource handlers simply don't know about. Use
* the I/O-memory resource as-is and try to map that instead.
*/
drm_warn(dev, "could not acquire memory region %pr\n", res);
mem = res;
}
screen_base = devm_ioremap_wc(&pdev->dev, mem->start, resource_size(mem));
if (!screen_base)
return ERR_PTR(-ENOMEM);
sdev->screen_base = screen_base;
/*
* Modesetting
*/
drm: Add simpledrm driver The simpledrm driver is a DRM driver for simple-framebuffer framebuffers as provided by the kernel's boot code. This driver enables basic graphical output on many different graphics devices that are provided by the platform (e.g., EFI, VESA, embedded framebuffers). With the kernel's simple-framebuffer infrastructure, the kernel receives a pre-configured framebuffer from the system (i.e., firmware, boot loader). It creates a platform device to which simpledrm attaches. The system's framebuffer consists of a memory range, size and format. Based on these values, simpledrm creates a DRM devices. No actual modesetting is possible. A firmware framebuffer might also be specified via device-tree files. If no device platform data is given, try the DT device node. Make sure required hardware clocks and regulators are enabled while the firmware framebuffer is in use. The basic code has been taken from the simplefb driver and adapted to DRM. Clocks are released automatically via devres helpers. The drivers displays a console on simpledrm's framebuffer. The default framebuffer format is being used. v4: * disable simplefb if simpledrm has been selected (Maxime) v3: * add disable function that clears screen to black (Daniel) * set shadow buffering only for fbdev emulation * set platform-driver data during device creation v2: * rename driver to simpledrm * add dri-devel to MAINTAINERS entry * put native format first in primary-plane format list (Daniel) * inline simplekms_device_cleanup() (Daniel) * use helpers for shadow-buffered planes * fix whitespace errors * add Device Tree match table * clean-up parser wrappers * use strscpy() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> # fbdev support Acked-by: Maxime Ripard <maxime@cerno.tech> Tested-by: nerdopolis <bluescreen_avenger@verizon.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-5-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-6-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-7-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-8-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-9-tzimmermann@suse.de
2021-04-30 10:58:35 +00:00
ret = drmm_mode_config_init(dev);
if (ret)
return ERR_PTR(ret);
drm: Add simpledrm driver The simpledrm driver is a DRM driver for simple-framebuffer framebuffers as provided by the kernel's boot code. This driver enables basic graphical output on many different graphics devices that are provided by the platform (e.g., EFI, VESA, embedded framebuffers). With the kernel's simple-framebuffer infrastructure, the kernel receives a pre-configured framebuffer from the system (i.e., firmware, boot loader). It creates a platform device to which simpledrm attaches. The system's framebuffer consists of a memory range, size and format. Based on these values, simpledrm creates a DRM devices. No actual modesetting is possible. A firmware framebuffer might also be specified via device-tree files. If no device platform data is given, try the DT device node. Make sure required hardware clocks and regulators are enabled while the firmware framebuffer is in use. The basic code has been taken from the simplefb driver and adapted to DRM. Clocks are released automatically via devres helpers. The drivers displays a console on simpledrm's framebuffer. The default framebuffer format is being used. v4: * disable simplefb if simpledrm has been selected (Maxime) v3: * add disable function that clears screen to black (Daniel) * set shadow buffering only for fbdev emulation * set platform-driver data during device creation v2: * rename driver to simpledrm * add dri-devel to MAINTAINERS entry * put native format first in primary-plane format list (Daniel) * inline simplekms_device_cleanup() (Daniel) * use helpers for shadow-buffered planes * fix whitespace errors * add Device Tree match table * clean-up parser wrappers * use strscpy() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> # fbdev support Acked-by: Maxime Ripard <maxime@cerno.tech> Tested-by: nerdopolis <bluescreen_avenger@verizon.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-5-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-6-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-7-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-8-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-9-tzimmermann@suse.de
2021-04-30 10:58:35 +00:00
max_width = max_t(unsigned long, width, DRM_SHADOW_PLANE_MAX_WIDTH);
max_height = max_t(unsigned long, height, DRM_SHADOW_PLANE_MAX_HEIGHT);
dev->mode_config.min_width = width;
dev->mode_config.max_width = max_width;
dev->mode_config.min_height = height;
dev->mode_config.max_height = max_height;
dev->mode_config.preferred_depth = format->cpp[0] * 8;
drm: Add simpledrm driver The simpledrm driver is a DRM driver for simple-framebuffer framebuffers as provided by the kernel's boot code. This driver enables basic graphical output on many different graphics devices that are provided by the platform (e.g., EFI, VESA, embedded framebuffers). With the kernel's simple-framebuffer infrastructure, the kernel receives a pre-configured framebuffer from the system (i.e., firmware, boot loader). It creates a platform device to which simpledrm attaches. The system's framebuffer consists of a memory range, size and format. Based on these values, simpledrm creates a DRM devices. No actual modesetting is possible. A firmware framebuffer might also be specified via device-tree files. If no device platform data is given, try the DT device node. Make sure required hardware clocks and regulators are enabled while the firmware framebuffer is in use. The basic code has been taken from the simplefb driver and adapted to DRM. Clocks are released automatically via devres helpers. The drivers displays a console on simpledrm's framebuffer. The default framebuffer format is being used. v4: * disable simplefb if simpledrm has been selected (Maxime) v3: * add disable function that clears screen to black (Daniel) * set shadow buffering only for fbdev emulation * set platform-driver data during device creation v2: * rename driver to simpledrm * add dri-devel to MAINTAINERS entry * put native format first in primary-plane format list (Daniel) * inline simplekms_device_cleanup() (Daniel) * use helpers for shadow-buffered planes * fix whitespace errors * add Device Tree match table * clean-up parser wrappers * use strscpy() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> # fbdev support Acked-by: Maxime Ripard <maxime@cerno.tech> Tested-by: nerdopolis <bluescreen_avenger@verizon.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-5-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-6-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-7-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-8-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-9-tzimmermann@suse.de
2021-04-30 10:58:35 +00:00
dev->mode_config.funcs = &simpledrm_mode_config_funcs;
/* Primary plane */
nformats = drm_fb_build_fourcc_list(dev, &format->format, 1,
simpledrm_primary_plane_formats,
ARRAY_SIZE(simpledrm_primary_plane_formats),
sdev->formats, ARRAY_SIZE(sdev->formats));
primary_plane = &sdev->primary_plane;
ret = drm_universal_plane_init(dev, primary_plane, 0, &simpledrm_primary_plane_funcs,
sdev->formats, nformats,
simpledrm_primary_plane_format_modifiers,
DRM_PLANE_TYPE_PRIMARY, NULL);
if (ret)
return ERR_PTR(ret);
drm_plane_helper_add(primary_plane, &simpledrm_primary_plane_helper_funcs);
drm_plane_enable_fb_damage_clips(primary_plane);
/* CRTC */
crtc = &sdev->crtc;
ret = drm_crtc_init_with_planes(dev, crtc, primary_plane, NULL,
&simpledrm_crtc_funcs, NULL);
if (ret)
return ERR_PTR(ret);
drm_crtc_helper_add(crtc, &simpledrm_crtc_helper_funcs);
/* Encoder */
encoder = &sdev->encoder;
ret = drm_encoder_init(dev, encoder, &simpledrm_encoder_funcs,
DRM_MODE_ENCODER_NONE, NULL);
if (ret)
return ERR_PTR(ret);
encoder->possible_crtcs = drm_crtc_mask(crtc);
/* Connector */
connector = &sdev->connector;
drm: Add simpledrm driver The simpledrm driver is a DRM driver for simple-framebuffer framebuffers as provided by the kernel's boot code. This driver enables basic graphical output on many different graphics devices that are provided by the platform (e.g., EFI, VESA, embedded framebuffers). With the kernel's simple-framebuffer infrastructure, the kernel receives a pre-configured framebuffer from the system (i.e., firmware, boot loader). It creates a platform device to which simpledrm attaches. The system's framebuffer consists of a memory range, size and format. Based on these values, simpledrm creates a DRM devices. No actual modesetting is possible. A firmware framebuffer might also be specified via device-tree files. If no device platform data is given, try the DT device node. Make sure required hardware clocks and regulators are enabled while the firmware framebuffer is in use. The basic code has been taken from the simplefb driver and adapted to DRM. Clocks are released automatically via devres helpers. The drivers displays a console on simpledrm's framebuffer. The default framebuffer format is being used. v4: * disable simplefb if simpledrm has been selected (Maxime) v3: * add disable function that clears screen to black (Daniel) * set shadow buffering only for fbdev emulation * set platform-driver data during device creation v2: * rename driver to simpledrm * add dri-devel to MAINTAINERS entry * put native format first in primary-plane format list (Daniel) * inline simplekms_device_cleanup() (Daniel) * use helpers for shadow-buffered planes * fix whitespace errors * add Device Tree match table * clean-up parser wrappers * use strscpy() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> # fbdev support Acked-by: Maxime Ripard <maxime@cerno.tech> Tested-by: nerdopolis <bluescreen_avenger@verizon.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-5-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-6-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-7-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-8-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-9-tzimmermann@suse.de
2021-04-30 10:58:35 +00:00
ret = drm_connector_init(dev, connector, &simpledrm_connector_funcs,
DRM_MODE_CONNECTOR_Unknown);
if (ret)
return ERR_PTR(ret);
drm: Add simpledrm driver The simpledrm driver is a DRM driver for simple-framebuffer framebuffers as provided by the kernel's boot code. This driver enables basic graphical output on many different graphics devices that are provided by the platform (e.g., EFI, VESA, embedded framebuffers). With the kernel's simple-framebuffer infrastructure, the kernel receives a pre-configured framebuffer from the system (i.e., firmware, boot loader). It creates a platform device to which simpledrm attaches. The system's framebuffer consists of a memory range, size and format. Based on these values, simpledrm creates a DRM devices. No actual modesetting is possible. A firmware framebuffer might also be specified via device-tree files. If no device platform data is given, try the DT device node. Make sure required hardware clocks and regulators are enabled while the firmware framebuffer is in use. The basic code has been taken from the simplefb driver and adapted to DRM. Clocks are released automatically via devres helpers. The drivers displays a console on simpledrm's framebuffer. The default framebuffer format is being used. v4: * disable simplefb if simpledrm has been selected (Maxime) v3: * add disable function that clears screen to black (Daniel) * set shadow buffering only for fbdev emulation * set platform-driver data during device creation v2: * rename driver to simpledrm * add dri-devel to MAINTAINERS entry * put native format first in primary-plane format list (Daniel) * inline simplekms_device_cleanup() (Daniel) * use helpers for shadow-buffered planes * fix whitespace errors * add Device Tree match table * clean-up parser wrappers * use strscpy() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> # fbdev support Acked-by: Maxime Ripard <maxime@cerno.tech> Tested-by: nerdopolis <bluescreen_avenger@verizon.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-5-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-6-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-7-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-8-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-9-tzimmermann@suse.de
2021-04-30 10:58:35 +00:00
drm_connector_helper_add(connector, &simpledrm_connector_helper_funcs);
drm_connector_set_panel_orientation_with_quirk(connector,
DRM_MODE_PANEL_ORIENTATION_UNKNOWN,
width, height);
drm: Add simpledrm driver The simpledrm driver is a DRM driver for simple-framebuffer framebuffers as provided by the kernel's boot code. This driver enables basic graphical output on many different graphics devices that are provided by the platform (e.g., EFI, VESA, embedded framebuffers). With the kernel's simple-framebuffer infrastructure, the kernel receives a pre-configured framebuffer from the system (i.e., firmware, boot loader). It creates a platform device to which simpledrm attaches. The system's framebuffer consists of a memory range, size and format. Based on these values, simpledrm creates a DRM devices. No actual modesetting is possible. A firmware framebuffer might also be specified via device-tree files. If no device platform data is given, try the DT device node. Make sure required hardware clocks and regulators are enabled while the firmware framebuffer is in use. The basic code has been taken from the simplefb driver and adapted to DRM. Clocks are released automatically via devres helpers. The drivers displays a console on simpledrm's framebuffer. The default framebuffer format is being used. v4: * disable simplefb if simpledrm has been selected (Maxime) v3: * add disable function that clears screen to black (Daniel) * set shadow buffering only for fbdev emulation * set platform-driver data during device creation v2: * rename driver to simpledrm * add dri-devel to MAINTAINERS entry * put native format first in primary-plane format list (Daniel) * inline simplekms_device_cleanup() (Daniel) * use helpers for shadow-buffered planes * fix whitespace errors * add Device Tree match table * clean-up parser wrappers * use strscpy() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> # fbdev support Acked-by: Maxime Ripard <maxime@cerno.tech> Tested-by: nerdopolis <bluescreen_avenger@verizon.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-5-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-6-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-7-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-8-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-9-tzimmermann@suse.de
2021-04-30 10:58:35 +00:00
ret = drm_connector_attach_encoder(connector, encoder);
drm: Add simpledrm driver The simpledrm driver is a DRM driver for simple-framebuffer framebuffers as provided by the kernel's boot code. This driver enables basic graphical output on many different graphics devices that are provided by the platform (e.g., EFI, VESA, embedded framebuffers). With the kernel's simple-framebuffer infrastructure, the kernel receives a pre-configured framebuffer from the system (i.e., firmware, boot loader). It creates a platform device to which simpledrm attaches. The system's framebuffer consists of a memory range, size and format. Based on these values, simpledrm creates a DRM devices. No actual modesetting is possible. A firmware framebuffer might also be specified via device-tree files. If no device platform data is given, try the DT device node. Make sure required hardware clocks and regulators are enabled while the firmware framebuffer is in use. The basic code has been taken from the simplefb driver and adapted to DRM. Clocks are released automatically via devres helpers. The drivers displays a console on simpledrm's framebuffer. The default framebuffer format is being used. v4: * disable simplefb if simpledrm has been selected (Maxime) v3: * add disable function that clears screen to black (Daniel) * set shadow buffering only for fbdev emulation * set platform-driver data during device creation v2: * rename driver to simpledrm * add dri-devel to MAINTAINERS entry * put native format first in primary-plane format list (Daniel) * inline simplekms_device_cleanup() (Daniel) * use helpers for shadow-buffered planes * fix whitespace errors * add Device Tree match table * clean-up parser wrappers * use strscpy() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> # fbdev support Acked-by: Maxime Ripard <maxime@cerno.tech> Tested-by: nerdopolis <bluescreen_avenger@verizon.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-5-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-6-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-7-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-8-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-9-tzimmermann@suse.de
2021-04-30 10:58:35 +00:00
if (ret)
return ERR_PTR(ret);
drm: Add simpledrm driver The simpledrm driver is a DRM driver for simple-framebuffer framebuffers as provided by the kernel's boot code. This driver enables basic graphical output on many different graphics devices that are provided by the platform (e.g., EFI, VESA, embedded framebuffers). With the kernel's simple-framebuffer infrastructure, the kernel receives a pre-configured framebuffer from the system (i.e., firmware, boot loader). It creates a platform device to which simpledrm attaches. The system's framebuffer consists of a memory range, size and format. Based on these values, simpledrm creates a DRM devices. No actual modesetting is possible. A firmware framebuffer might also be specified via device-tree files. If no device platform data is given, try the DT device node. Make sure required hardware clocks and regulators are enabled while the firmware framebuffer is in use. The basic code has been taken from the simplefb driver and adapted to DRM. Clocks are released automatically via devres helpers. The drivers displays a console on simpledrm's framebuffer. The default framebuffer format is being used. v4: * disable simplefb if simpledrm has been selected (Maxime) v3: * add disable function that clears screen to black (Daniel) * set shadow buffering only for fbdev emulation * set platform-driver data during device creation v2: * rename driver to simpledrm * add dri-devel to MAINTAINERS entry * put native format first in primary-plane format list (Daniel) * inline simplekms_device_cleanup() (Daniel) * use helpers for shadow-buffered planes * fix whitespace errors * add Device Tree match table * clean-up parser wrappers * use strscpy() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> # fbdev support Acked-by: Maxime Ripard <maxime@cerno.tech> Tested-by: nerdopolis <bluescreen_avenger@verizon.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-5-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-6-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-7-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-8-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-9-tzimmermann@suse.de
2021-04-30 10:58:35 +00:00
drm_mode_config_reset(dev);
return sdev;
}
/*
* DRM driver
*/
DEFINE_DRM_GEM_FOPS(simpledrm_fops);
static struct drm_driver simpledrm_driver = {
DRM_GEM_SHMEM_DRIVER_OPS,
.name = DRIVER_NAME,
.desc = DRIVER_DESC,
.date = DRIVER_DATE,
.major = DRIVER_MAJOR,
.minor = DRIVER_MINOR,
.driver_features = DRIVER_ATOMIC | DRIVER_GEM | DRIVER_MODESET,
.fops = &simpledrm_fops,
};
/*
* Platform driver
*/
static int simpledrm_probe(struct platform_device *pdev)
{
struct simpledrm_device *sdev;
struct drm_device *dev;
int ret;
sdev = simpledrm_device_create(&simpledrm_driver, pdev);
if (IS_ERR(sdev))
return PTR_ERR(sdev);
dev = &sdev->dev;
ret = drm_dev_register(dev, 0);
if (ret)
return ret;
drm_fbdev_generic_setup(dev, 0);
return 0;
}
static int simpledrm_remove(struct platform_device *pdev)
{
struct simpledrm_device *sdev = platform_get_drvdata(pdev);
struct drm_device *dev = &sdev->dev;
drm_dev_unplug(dev);
drm: Add simpledrm driver The simpledrm driver is a DRM driver for simple-framebuffer framebuffers as provided by the kernel's boot code. This driver enables basic graphical output on many different graphics devices that are provided by the platform (e.g., EFI, VESA, embedded framebuffers). With the kernel's simple-framebuffer infrastructure, the kernel receives a pre-configured framebuffer from the system (i.e., firmware, boot loader). It creates a platform device to which simpledrm attaches. The system's framebuffer consists of a memory range, size and format. Based on these values, simpledrm creates a DRM devices. No actual modesetting is possible. A firmware framebuffer might also be specified via device-tree files. If no device platform data is given, try the DT device node. Make sure required hardware clocks and regulators are enabled while the firmware framebuffer is in use. The basic code has been taken from the simplefb driver and adapted to DRM. Clocks are released automatically via devres helpers. The drivers displays a console on simpledrm's framebuffer. The default framebuffer format is being used. v4: * disable simplefb if simpledrm has been selected (Maxime) v3: * add disable function that clears screen to black (Daniel) * set shadow buffering only for fbdev emulation * set platform-driver data during device creation v2: * rename driver to simpledrm * add dri-devel to MAINTAINERS entry * put native format first in primary-plane format list (Daniel) * inline simplekms_device_cleanup() (Daniel) * use helpers for shadow-buffered planes * fix whitespace errors * add Device Tree match table * clean-up parser wrappers * use strscpy() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> # fbdev support Acked-by: Maxime Ripard <maxime@cerno.tech> Tested-by: nerdopolis <bluescreen_avenger@verizon.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-5-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-6-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-7-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-8-tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-9-tzimmermann@suse.de
2021-04-30 10:58:35 +00:00
return 0;
}
static const struct of_device_id simpledrm_of_match_table[] = {
{ .compatible = "simple-framebuffer", },
{ },
};
MODULE_DEVICE_TABLE(of, simpledrm_of_match_table);
static struct platform_driver simpledrm_platform_driver = {
.driver = {
.name = "simple-framebuffer", /* connect to sysfb */
.of_match_table = simpledrm_of_match_table,
},
.probe = simpledrm_probe,
.remove = simpledrm_remove,
};
module_platform_driver(simpledrm_platform_driver);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL v2");