[PATCH] ioc4: Core driver rewrite
This series of patches reworks the configuration and internal structure
of the SGI IOC4 I/O controller device drivers.
These changes are motivated by several factors:
- The IOC4 chip PCI resources are of mixed use between functions (i.e.
multiple functions are handled in the same address range, sometimes
within the same register), muddling resource ownership and initialization
issues. Centralizing this ownership in a core driver is desirable.
- The IOC4 chip implements multiple functions (serial, IDE, others not
yet implemented in the mainline kernel) but is not a multifunction
PCI device. In order to properly handle device addition and removal
as well as module insertion and deletion, an intermediary IOC4-specific
driver layer is needed to handle these operations cleanly.
- All IOC4 drivers are currently enabled by a single CONFIG value. As
not all systems need all IOC4 functions, it is desireable to enable
these drivers independently.
- The current IOC4 core driver will trigger loading of all function-level
drivers, as it makes direct calls to them. This situation should be
reversed (i.e. function-level drivers cause loading of core driver)
in order to maintain a clear and least-surprise driver loading model.
- IOC4 hardware design necessitates some driver-level dependency on
the PCI bus clock speed. Current code assumes a 66MHz bus, but the
speed should be autodetected and appropriate compensation taken.
This patch series effects the above changes by a newly and better designed
IOC4 core driver with which the function-level drivers can register and
deregister themselves upon module insertion/removal. By tracking these
modules, device addition/removal is also handled properly. PCI resource
management and ownership issues are centralized in this core driver, and
IOC4-wide configuration actions such as bus speed detection are also
handled in this core driver.
This patch:
The SGI IOC4 I/O controller chip implements multiple functions, though it is
not a multi-function PCI device. Additionally, various PCI resources of the
IOC4 are shared by multiple hardware functions, and thus resource ownership by
driver is not clearly delineated. Due to the current driver design, all core
and subordinate drivers must be loaded, or none, which is undesirable if not
all IOC4 hardware features are being used.
This patch reorganizes the IOC4 drivers so that the core driver provides a
subdriver registration service. Through appropriate callbacks the subdrivers
can now handle device addition and removal, as well as module insertion and
deletion (though the IOC4 IDE driver requires further work before module
deletion will work). The core driver now takes care of allocating PCI
resources and data which must be shared between subdrivers, to clearly
delineate module ownership of these items.
Signed-off-by: Brent Casavant <bcasavan@sgi.com>
Acked-by: Pat Gefre <pfg@sgi.com
Acked-by: Jeremy Higdon <jeremy@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-22 00:15:59 +00:00
|
|
|
/*
|
|
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
|
|
* License. See the file "COPYING" in the main directory of this archive
|
|
|
|
* for more details.
|
|
|
|
*
|
|
|
|
* Copyright (c) 2005 Silicon Graphics, Inc. All Rights Reserved.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#ifndef _LINUX_IOC4_H
|
|
|
|
#define _LINUX_IOC4_H
|
|
|
|
|
|
|
|
#include <linux/interrupt.h>
|
|
|
|
|
2005-06-22 00:16:01 +00:00
|
|
|
/***************
|
|
|
|
* Definitions *
|
|
|
|
***************/
|
|
|
|
|
|
|
|
/* Miscellaneous values inherent to hardware */
|
|
|
|
|
|
|
|
#define IOC4_EXTINT_COUNT_DIVISOR 520 /* PCI clocks per COUNT tick */
|
|
|
|
|
[PATCH] ioc4: Core driver rewrite
This series of patches reworks the configuration and internal structure
of the SGI IOC4 I/O controller device drivers.
These changes are motivated by several factors:
- The IOC4 chip PCI resources are of mixed use between functions (i.e.
multiple functions are handled in the same address range, sometimes
within the same register), muddling resource ownership and initialization
issues. Centralizing this ownership in a core driver is desirable.
- The IOC4 chip implements multiple functions (serial, IDE, others not
yet implemented in the mainline kernel) but is not a multifunction
PCI device. In order to properly handle device addition and removal
as well as module insertion and deletion, an intermediary IOC4-specific
driver layer is needed to handle these operations cleanly.
- All IOC4 drivers are currently enabled by a single CONFIG value. As
not all systems need all IOC4 functions, it is desireable to enable
these drivers independently.
- The current IOC4 core driver will trigger loading of all function-level
drivers, as it makes direct calls to them. This situation should be
reversed (i.e. function-level drivers cause loading of core driver)
in order to maintain a clear and least-surprise driver loading model.
- IOC4 hardware design necessitates some driver-level dependency on
the PCI bus clock speed. Current code assumes a 66MHz bus, but the
speed should be autodetected and appropriate compensation taken.
This patch series effects the above changes by a newly and better designed
IOC4 core driver with which the function-level drivers can register and
deregister themselves upon module insertion/removal. By tracking these
modules, device addition/removal is also handled properly. PCI resource
management and ownership issues are centralized in this core driver, and
IOC4-wide configuration actions such as bus speed detection are also
handled in this core driver.
This patch:
The SGI IOC4 I/O controller chip implements multiple functions, though it is
not a multi-function PCI device. Additionally, various PCI resources of the
IOC4 are shared by multiple hardware functions, and thus resource ownership by
driver is not clearly delineated. Due to the current driver design, all core
and subordinate drivers must be loaded, or none, which is undesirable if not
all IOC4 hardware features are being used.
This patch reorganizes the IOC4 drivers so that the core driver provides a
subdriver registration service. Through appropriate callbacks the subdrivers
can now handle device addition and removal, as well as module insertion and
deletion (though the IOC4 IDE driver requires further work before module
deletion will work). The core driver now takes care of allocating PCI
resources and data which must be shared between subdrivers, to clearly
delineate module ownership of these items.
Signed-off-by: Brent Casavant <bcasavan@sgi.com>
Acked-by: Pat Gefre <pfg@sgi.com
Acked-by: Jeremy Higdon <jeremy@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-22 00:15:59 +00:00
|
|
|
/***********************************
|
|
|
|
* Structures needed by subdrivers *
|
|
|
|
***********************************/
|
|
|
|
|
|
|
|
/* This structure fully describes the IOC4 miscellaneous registers which
|
|
|
|
* appear at bar[0]+0x00000 through bar[0]+0x0005c. The corresponding
|
|
|
|
* PCI resource is managed by the main IOC4 driver because it contains
|
|
|
|
* registers of interest to many different IOC4 subdrivers.
|
|
|
|
*/
|
|
|
|
struct ioc4_misc_regs {
|
|
|
|
/* Miscellaneous IOC4 registers */
|
|
|
|
union ioc4_pci_err_addr_l {
|
|
|
|
uint32_t raw;
|
|
|
|
struct {
|
|
|
|
uint32_t valid:1; /* Address captured */
|
|
|
|
uint32_t master_id:4; /* Unit causing error
|
|
|
|
* 0/1: Serial port 0 TX/RX
|
|
|
|
* 2/3: Serial port 1 TX/RX
|
|
|
|
* 4/5: Serial port 2 TX/RX
|
|
|
|
* 6/7: Serial port 3 TX/RX
|
|
|
|
* 8: ATA/ATAPI
|
|
|
|
* 9-15: Undefined
|
|
|
|
*/
|
|
|
|
uint32_t mul_err:1; /* Multiple errors occurred */
|
|
|
|
uint32_t addr:26; /* Bits 31-6 of error addr */
|
|
|
|
} fields;
|
|
|
|
} pci_err_addr_l;
|
|
|
|
uint32_t pci_err_addr_h; /* Bits 63-32 of error addr */
|
|
|
|
union ioc4_sio_int {
|
|
|
|
uint32_t raw;
|
|
|
|
struct {
|
|
|
|
uint8_t tx_mt:1; /* TX ring buffer empty */
|
|
|
|
uint8_t rx_full:1; /* RX ring buffer full */
|
|
|
|
uint8_t rx_high:1; /* RX high-water exceeded */
|
|
|
|
uint8_t rx_timer:1; /* RX timer has triggered */
|
|
|
|
uint8_t delta_dcd:1; /* DELTA_DCD seen */
|
|
|
|
uint8_t delta_cts:1; /* DELTA_CTS seen */
|
|
|
|
uint8_t intr_pass:1; /* Interrupt pass-through */
|
|
|
|
uint8_t tx_explicit:1; /* TX, MCW, or delay complete */
|
|
|
|
} fields[4];
|
|
|
|
} sio_ir; /* Serial interrupt state */
|
|
|
|
union ioc4_other_int {
|
|
|
|
uint32_t raw;
|
|
|
|
struct {
|
|
|
|
uint32_t ata_int:1; /* ATA port passthru */
|
|
|
|
uint32_t ata_memerr:1; /* ATA halted by mem error */
|
|
|
|
uint32_t memerr:4; /* Serial halted by mem err */
|
|
|
|
uint32_t kbd_int:1; /* kbd/mouse intr asserted */
|
|
|
|
uint32_t reserved:16; /* zero */
|
|
|
|
uint32_t rt_int:1; /* INT_OUT section latch */
|
|
|
|
uint32_t gen_int:8; /* Intr. from generic pins */
|
|
|
|
} fields;
|
|
|
|
} other_ir; /* Other interrupt state */
|
|
|
|
union ioc4_sio_int sio_ies; /* Serial interrupt enable set */
|
|
|
|
union ioc4_other_int other_ies; /* Other interrupt enable set */
|
|
|
|
union ioc4_sio_int sio_iec; /* Serial interrupt enable clear */
|
|
|
|
union ioc4_other_int other_iec; /* Other interrupt enable clear */
|
|
|
|
union ioc4_sio_cr {
|
|
|
|
uint32_t raw;
|
|
|
|
struct {
|
|
|
|
uint32_t cmd_pulse:4; /* Bytebus strobe width */
|
|
|
|
uint32_t arb_diag:3; /* PCI bus requester */
|
|
|
|
uint32_t sio_diag_idle:1; /* Active ser req? */
|
|
|
|
uint32_t ata_diag_idle:1; /* Active ATA req? */
|
|
|
|
uint32_t ata_diag_active:1; /* ATA req is winner */
|
|
|
|
uint32_t reserved:22; /* zero */
|
|
|
|
} fields;
|
|
|
|
} sio_cr;
|
|
|
|
uint32_t unused1;
|
|
|
|
union ioc4_int_out {
|
|
|
|
uint32_t raw;
|
|
|
|
struct {
|
|
|
|
uint32_t count:16; /* Period control */
|
|
|
|
uint32_t mode:3; /* Output signal shape */
|
|
|
|
uint32_t reserved:11; /* zero */
|
|
|
|
uint32_t diag:1; /* Timebase control */
|
|
|
|
uint32_t int_out:1; /* Current value */
|
|
|
|
} fields;
|
|
|
|
} int_out; /* External interrupt output control */
|
|
|
|
uint32_t unused2;
|
|
|
|
union ioc4_gpcr {
|
|
|
|
uint32_t raw;
|
|
|
|
struct {
|
|
|
|
uint32_t dir:8; /* Pin direction */
|
|
|
|
uint32_t edge:8; /* Edge/level mode */
|
|
|
|
uint32_t reserved1:4; /* zero */
|
|
|
|
uint32_t int_out_en:1; /* INT_OUT enable */
|
|
|
|
uint32_t reserved2:11; /* zero */
|
|
|
|
} fields;
|
|
|
|
} gpcr_s; /* Generic PIO control set */
|
|
|
|
union ioc4_gpcr gpcr_c; /* Generic PIO control clear */
|
|
|
|
union ioc4_gpdr {
|
|
|
|
uint32_t raw;
|
|
|
|
struct {
|
|
|
|
uint32_t gen_pin:8; /* State of pins */
|
|
|
|
uint32_t reserved:24;
|
|
|
|
} fields;
|
|
|
|
} gpdr; /* Generic PIO data */
|
|
|
|
uint32_t unused3;
|
|
|
|
union ioc4_gppr {
|
|
|
|
uint32_t raw;
|
|
|
|
struct {
|
|
|
|
uint32_t gen_pin:1; /* Single pin state */
|
|
|
|
uint32_t reserved:31;
|
|
|
|
} fields;
|
|
|
|
} gppr[8]; /* Generic PIO pins */
|
|
|
|
};
|
|
|
|
|
2005-06-22 00:16:01 +00:00
|
|
|
/* Masks for GPCR DIR pins */
|
|
|
|
#define IOC4_GPCR_DIR_0 0x01 /* External interrupt output */
|
|
|
|
#define IOC4_GPCR_DIR_1 0x02 /* External interrupt input */
|
|
|
|
#define IOC4_GPCR_DIR_2 0x04
|
|
|
|
#define IOC4_GPCR_DIR_3 0x08 /* Keyboard/mouse presence */
|
|
|
|
#define IOC4_GPCR_DIR_4 0x10 /* Ser. port 0 xcvr select (0=232, 1=422) */
|
|
|
|
#define IOC4_GPCR_DIR_5 0x20 /* Ser. port 1 xcvr select (0=232, 1=422) */
|
|
|
|
#define IOC4_GPCR_DIR_6 0x40 /* Ser. port 2 xcvr select (0=232, 1=422) */
|
|
|
|
#define IOC4_GPCR_DIR_7 0x80 /* Ser. port 3 xcvr select (0=232, 1=422) */
|
|
|
|
|
|
|
|
/* Masks for GPCR EDGE pins */
|
|
|
|
#define IOC4_GPCR_EDGE_0 0x01
|
|
|
|
#define IOC4_GPCR_EDGE_1 0x02 /* External interrupt input */
|
|
|
|
#define IOC4_GPCR_EDGE_2 0x04
|
|
|
|
#define IOC4_GPCR_EDGE_3 0x08
|
|
|
|
#define IOC4_GPCR_EDGE_4 0x10
|
|
|
|
#define IOC4_GPCR_EDGE_5 0x20
|
|
|
|
#define IOC4_GPCR_EDGE_6 0x40
|
|
|
|
#define IOC4_GPCR_EDGE_7 0x80
|
|
|
|
|
2006-06-23 09:05:52 +00:00
|
|
|
#define IOC4_VARIANT_IO9 0x0900
|
|
|
|
#define IOC4_VARIANT_PCI_RT 0x0901
|
|
|
|
#define IOC4_VARIANT_IO10 0x1000
|
|
|
|
|
2005-06-22 00:16:01 +00:00
|
|
|
/* One of these per IOC4 */
|
[PATCH] ioc4: Core driver rewrite
This series of patches reworks the configuration and internal structure
of the SGI IOC4 I/O controller device drivers.
These changes are motivated by several factors:
- The IOC4 chip PCI resources are of mixed use between functions (i.e.
multiple functions are handled in the same address range, sometimes
within the same register), muddling resource ownership and initialization
issues. Centralizing this ownership in a core driver is desirable.
- The IOC4 chip implements multiple functions (serial, IDE, others not
yet implemented in the mainline kernel) but is not a multifunction
PCI device. In order to properly handle device addition and removal
as well as module insertion and deletion, an intermediary IOC4-specific
driver layer is needed to handle these operations cleanly.
- All IOC4 drivers are currently enabled by a single CONFIG value. As
not all systems need all IOC4 functions, it is desireable to enable
these drivers independently.
- The current IOC4 core driver will trigger loading of all function-level
drivers, as it makes direct calls to them. This situation should be
reversed (i.e. function-level drivers cause loading of core driver)
in order to maintain a clear and least-surprise driver loading model.
- IOC4 hardware design necessitates some driver-level dependency on
the PCI bus clock speed. Current code assumes a 66MHz bus, but the
speed should be autodetected and appropriate compensation taken.
This patch series effects the above changes by a newly and better designed
IOC4 core driver with which the function-level drivers can register and
deregister themselves upon module insertion/removal. By tracking these
modules, device addition/removal is also handled properly. PCI resource
management and ownership issues are centralized in this core driver, and
IOC4-wide configuration actions such as bus speed detection are also
handled in this core driver.
This patch:
The SGI IOC4 I/O controller chip implements multiple functions, though it is
not a multi-function PCI device. Additionally, various PCI resources of the
IOC4 are shared by multiple hardware functions, and thus resource ownership by
driver is not clearly delineated. Due to the current driver design, all core
and subordinate drivers must be loaded, or none, which is undesirable if not
all IOC4 hardware features are being used.
This patch reorganizes the IOC4 drivers so that the core driver provides a
subdriver registration service. Through appropriate callbacks the subdrivers
can now handle device addition and removal, as well as module insertion and
deletion (though the IOC4 IDE driver requires further work before module
deletion will work). The core driver now takes care of allocating PCI
resources and data which must be shared between subdrivers, to clearly
delineate module ownership of these items.
Signed-off-by: Brent Casavant <bcasavan@sgi.com>
Acked-by: Pat Gefre <pfg@sgi.com
Acked-by: Jeremy Higdon <jeremy@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-22 00:15:59 +00:00
|
|
|
struct ioc4_driver_data {
|
|
|
|
struct list_head idd_list;
|
|
|
|
unsigned long idd_bar0;
|
|
|
|
struct pci_dev *idd_pdev;
|
|
|
|
const struct pci_device_id *idd_pci_id;
|
2006-10-10 21:46:47 +00:00
|
|
|
struct ioc4_misc_regs __iomem *idd_misc_regs;
|
2005-06-22 00:16:01 +00:00
|
|
|
unsigned long count_period;
|
[PATCH] ioc4: Core driver rewrite
This series of patches reworks the configuration and internal structure
of the SGI IOC4 I/O controller device drivers.
These changes are motivated by several factors:
- The IOC4 chip PCI resources are of mixed use between functions (i.e.
multiple functions are handled in the same address range, sometimes
within the same register), muddling resource ownership and initialization
issues. Centralizing this ownership in a core driver is desirable.
- The IOC4 chip implements multiple functions (serial, IDE, others not
yet implemented in the mainline kernel) but is not a multifunction
PCI device. In order to properly handle device addition and removal
as well as module insertion and deletion, an intermediary IOC4-specific
driver layer is needed to handle these operations cleanly.
- All IOC4 drivers are currently enabled by a single CONFIG value. As
not all systems need all IOC4 functions, it is desireable to enable
these drivers independently.
- The current IOC4 core driver will trigger loading of all function-level
drivers, as it makes direct calls to them. This situation should be
reversed (i.e. function-level drivers cause loading of core driver)
in order to maintain a clear and least-surprise driver loading model.
- IOC4 hardware design necessitates some driver-level dependency on
the PCI bus clock speed. Current code assumes a 66MHz bus, but the
speed should be autodetected and appropriate compensation taken.
This patch series effects the above changes by a newly and better designed
IOC4 core driver with which the function-level drivers can register and
deregister themselves upon module insertion/removal. By tracking these
modules, device addition/removal is also handled properly. PCI resource
management and ownership issues are centralized in this core driver, and
IOC4-wide configuration actions such as bus speed detection are also
handled in this core driver.
This patch:
The SGI IOC4 I/O controller chip implements multiple functions, though it is
not a multi-function PCI device. Additionally, various PCI resources of the
IOC4 are shared by multiple hardware functions, and thus resource ownership by
driver is not clearly delineated. Due to the current driver design, all core
and subordinate drivers must be loaded, or none, which is undesirable if not
all IOC4 hardware features are being used.
This patch reorganizes the IOC4 drivers so that the core driver provides a
subdriver registration service. Through appropriate callbacks the subdrivers
can now handle device addition and removal, as well as module insertion and
deletion (though the IOC4 IDE driver requires further work before module
deletion will work). The core driver now takes care of allocating PCI
resources and data which must be shared between subdrivers, to clearly
delineate module ownership of these items.
Signed-off-by: Brent Casavant <bcasavan@sgi.com>
Acked-by: Pat Gefre <pfg@sgi.com
Acked-by: Jeremy Higdon <jeremy@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-22 00:15:59 +00:00
|
|
|
void *idd_serial_data;
|
2006-06-23 09:05:52 +00:00
|
|
|
unsigned int idd_variant;
|
[PATCH] ioc4: Core driver rewrite
This series of patches reworks the configuration and internal structure
of the SGI IOC4 I/O controller device drivers.
These changes are motivated by several factors:
- The IOC4 chip PCI resources are of mixed use between functions (i.e.
multiple functions are handled in the same address range, sometimes
within the same register), muddling resource ownership and initialization
issues. Centralizing this ownership in a core driver is desirable.
- The IOC4 chip implements multiple functions (serial, IDE, others not
yet implemented in the mainline kernel) but is not a multifunction
PCI device. In order to properly handle device addition and removal
as well as module insertion and deletion, an intermediary IOC4-specific
driver layer is needed to handle these operations cleanly.
- All IOC4 drivers are currently enabled by a single CONFIG value. As
not all systems need all IOC4 functions, it is desireable to enable
these drivers independently.
- The current IOC4 core driver will trigger loading of all function-level
drivers, as it makes direct calls to them. This situation should be
reversed (i.e. function-level drivers cause loading of core driver)
in order to maintain a clear and least-surprise driver loading model.
- IOC4 hardware design necessitates some driver-level dependency on
the PCI bus clock speed. Current code assumes a 66MHz bus, but the
speed should be autodetected and appropriate compensation taken.
This patch series effects the above changes by a newly and better designed
IOC4 core driver with which the function-level drivers can register and
deregister themselves upon module insertion/removal. By tracking these
modules, device addition/removal is also handled properly. PCI resource
management and ownership issues are centralized in this core driver, and
IOC4-wide configuration actions such as bus speed detection are also
handled in this core driver.
This patch:
The SGI IOC4 I/O controller chip implements multiple functions, though it is
not a multi-function PCI device. Additionally, various PCI resources of the
IOC4 are shared by multiple hardware functions, and thus resource ownership by
driver is not clearly delineated. Due to the current driver design, all core
and subordinate drivers must be loaded, or none, which is undesirable if not
all IOC4 hardware features are being used.
This patch reorganizes the IOC4 drivers so that the core driver provides a
subdriver registration service. Through appropriate callbacks the subdrivers
can now handle device addition and removal, as well as module insertion and
deletion (though the IOC4 IDE driver requires further work before module
deletion will work). The core driver now takes care of allocating PCI
resources and data which must be shared between subdrivers, to clearly
delineate module ownership of these items.
Signed-off-by: Brent Casavant <bcasavan@sgi.com>
Acked-by: Pat Gefre <pfg@sgi.com
Acked-by: Jeremy Higdon <jeremy@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-22 00:15:59 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
/* One per submodule */
|
|
|
|
struct ioc4_submodule {
|
|
|
|
struct list_head is_list;
|
|
|
|
char *is_name;
|
|
|
|
struct module *is_owner;
|
|
|
|
int (*is_probe) (struct ioc4_driver_data *);
|
|
|
|
int (*is_remove) (struct ioc4_driver_data *);
|
|
|
|
};
|
|
|
|
|
|
|
|
#define IOC4_NUM_CARDS 8 /* max cards per partition */
|
|
|
|
|
|
|
|
/**********************************
|
|
|
|
* Functions needed by submodules *
|
|
|
|
**********************************/
|
|
|
|
|
|
|
|
extern int ioc4_register_submodule(struct ioc4_submodule *);
|
|
|
|
extern void ioc4_unregister_submodule(struct ioc4_submodule *);
|
|
|
|
|
|
|
|
#endif /* _LINUX_IOC4_H */
|