linux-stable/fs/xfs/libxfs/xfs_sb.c

1200 lines
36 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2000-2005 Silicon Graphics, Inc.
* All Rights Reserved.
*/
#include "xfs.h"
#include "xfs_fs.h"
#include "xfs_shared.h"
#include "xfs_format.h"
#include "xfs_log_format.h"
#include "xfs_trans_resv.h"
#include "xfs_bit.h"
#include "xfs_sb.h"
#include "xfs_mount.h"
#include "xfs_ialloc.h"
#include "xfs_alloc.h"
#include "xfs_error.h"
#include "xfs_trace.h"
#include "xfs_trans.h"
#include "xfs_buf_item.h"
#include "xfs_bmap_btree.h"
#include "xfs_alloc_btree.h"
xfs: validate metadata LSNs against log on v5 superblocks Since the onset of v5 superblocks, the LSN of the last modification has been included in a variety of on-disk data structures. This LSN is used to provide log recovery ordering guarantees (e.g., to ensure an older log recovery item is not replayed over a newer target data structure). While this works correctly from the point a filesystem is formatted and mounted, userspace tools have some problematic behaviors that defeat this mechanism. For example, xfs_repair historically zeroes out the log unconditionally (regardless of whether corruption is detected). If this occurs, the LSN of the filesystem is reset and the log is now in a problematic state with respect to on-disk metadata structures that might have a larger LSN. Until either the log catches up to the highest previously used metadata LSN or each affected data structure is modified and written out without incident (which resets the metadata LSN), log recovery is susceptible to filesystem corruption. This problem is ultimately addressed and repaired in the associated userspace tools. The kernel is still responsible to detect the problem and notify the user that something is wrong. Check the superblock LSN at mount time and fail the mount if it is invalid. From that point on, trigger verifier failure on any metadata I/O where an invalid LSN is detected. This results in a filesystem shutdown and guarantees that we do not log metadata changes with invalid LSNs on disk. Since this is a known issue with a known recovery path, present a warning to instruct the user how to recover. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-10-12 04:59:25 +00:00
#include "xfs_log.h"
#include "xfs_rmap_btree.h"
#include "xfs_refcount_btree.h"
#include "xfs_da_format.h"
#include "xfs_health.h"
/*
* Physical superblock buffer manipulations. Shared with libxfs in userspace.
*/
/*
* Reference counting access wrappers to the perag structures.
* Because we never free per-ag structures, the only thing we
* have to protect against changes is the tree structure itself.
*/
struct xfs_perag *
xfs_perag_get(
struct xfs_mount *mp,
xfs_agnumber_t agno)
{
struct xfs_perag *pag;
int ref = 0;
rcu_read_lock();
pag = radix_tree_lookup(&mp->m_perag_tree, agno);
if (pag) {
ASSERT(atomic_read(&pag->pag_ref) >= 0);
ref = atomic_inc_return(&pag->pag_ref);
}
rcu_read_unlock();
trace_xfs_perag_get(mp, agno, ref, _RET_IP_);
return pag;
}
/*
* search from @first to find the next perag with the given tag set.
*/
struct xfs_perag *
xfs_perag_get_tag(
struct xfs_mount *mp,
xfs_agnumber_t first,
int tag)
{
struct xfs_perag *pag;
int found;
int ref;
rcu_read_lock();
found = radix_tree_gang_lookup_tag(&mp->m_perag_tree,
(void **)&pag, first, 1, tag);
if (found <= 0) {
rcu_read_unlock();
return NULL;
}
ref = atomic_inc_return(&pag->pag_ref);
rcu_read_unlock();
trace_xfs_perag_get_tag(mp, pag->pag_agno, ref, _RET_IP_);
return pag;
}
void
xfs_perag_put(
struct xfs_perag *pag)
{
int ref;
ASSERT(atomic_read(&pag->pag_ref) > 0);
ref = atomic_dec_return(&pag->pag_ref);
trace_xfs_perag_put(pag->pag_mount, pag->pag_agno, ref, _RET_IP_);
}
/* Check all the superblock fields we care about when reading one in. */
STATIC int
xfs_validate_sb_read(
struct xfs_mount *mp,
struct xfs_sb *sbp)
{
if (XFS_SB_VERSION_NUM(sbp) != XFS_SB_VERSION_5)
return 0;
/*
* Version 5 superblock feature mask validation. Reject combinations
* the kernel cannot support up front before checking anything else.
*/
if (xfs_sb_has_compat_feature(sbp, XFS_SB_FEAT_COMPAT_UNKNOWN)) {
xfs_warn(mp,
"Superblock has unknown compatible features (0x%x) enabled.",
(sbp->sb_features_compat & XFS_SB_FEAT_COMPAT_UNKNOWN));
xfs_warn(mp,
"Using a more recent kernel is recommended.");
}
if (xfs_sb_has_ro_compat_feature(sbp, XFS_SB_FEAT_RO_COMPAT_UNKNOWN)) {
xfs_alert(mp,
"Superblock has unknown read-only compatible features (0x%x) enabled.",
(sbp->sb_features_ro_compat &
XFS_SB_FEAT_RO_COMPAT_UNKNOWN));
if (!(mp->m_flags & XFS_MOUNT_RDONLY)) {
xfs_warn(mp,
"Attempted to mount read-only compatible filesystem read-write.");
xfs_warn(mp,
"Filesystem can only be safely mounted read only.");
return -EINVAL;
}
}
if (xfs_sb_has_incompat_feature(sbp, XFS_SB_FEAT_INCOMPAT_UNKNOWN)) {
xfs_warn(mp,
"Superblock has unknown incompatible features (0x%x) enabled.",
(sbp->sb_features_incompat &
XFS_SB_FEAT_INCOMPAT_UNKNOWN));
xfs_warn(mp,
"Filesystem cannot be safely mounted by this kernel.");
return -EINVAL;
}
return 0;
}
/* Check all the superblock fields we care about when writing one out. */
STATIC int
xfs_validate_sb_write(
struct xfs_mount *mp,
struct xfs_buf *bp,
struct xfs_sb *sbp)
{
/*
* Carry out additional sb summary counter sanity checks when we write
* the superblock. We skip this in the read validator because there
* could be newer superblocks in the log and if the values are garbage
* even after replay we'll recalculate them at the end of log mount.
*
* mkfs has traditionally written zeroed counters to inprogress and
* secondary superblocks, so allow this usage to continue because
* we never read counters from such superblocks.
*/
if (XFS_BUF_ADDR(bp) == XFS_SB_DADDR && !sbp->sb_inprogress &&
(sbp->sb_fdblocks > sbp->sb_dblocks ||
!xfs_verify_icount(mp, sbp->sb_icount) ||
sbp->sb_ifree > sbp->sb_icount)) {
xfs_warn(mp, "SB summary counter sanity check failed");
return -EFSCORRUPTED;
}
if (XFS_SB_VERSION_NUM(sbp) != XFS_SB_VERSION_5)
return 0;
/*
* Version 5 superblock feature mask validation. Reject combinations
* the kernel cannot support since we checked for unsupported bits in
* the read verifier, which means that memory is corrupt.
*/
if (xfs_sb_has_compat_feature(sbp, XFS_SB_FEAT_COMPAT_UNKNOWN)) {
xfs_warn(mp,
"Corruption detected in superblock compatible features (0x%x)!",
(sbp->sb_features_compat & XFS_SB_FEAT_COMPAT_UNKNOWN));
return -EFSCORRUPTED;
}
if (xfs_sb_has_ro_compat_feature(sbp, XFS_SB_FEAT_RO_COMPAT_UNKNOWN)) {
xfs_alert(mp,
"Corruption detected in superblock read-only compatible features (0x%x)!",
(sbp->sb_features_ro_compat &
XFS_SB_FEAT_RO_COMPAT_UNKNOWN));
return -EFSCORRUPTED;
}
if (xfs_sb_has_incompat_feature(sbp, XFS_SB_FEAT_INCOMPAT_UNKNOWN)) {
xfs_warn(mp,
"Corruption detected in superblock incompatible features (0x%x)!",
(sbp->sb_features_incompat &
XFS_SB_FEAT_INCOMPAT_UNKNOWN));
return -EFSCORRUPTED;
}
if (xfs_sb_has_incompat_log_feature(sbp,
XFS_SB_FEAT_INCOMPAT_LOG_UNKNOWN)) {
xfs_warn(mp,
"Corruption detected in superblock incompatible log features (0x%x)!",
(sbp->sb_features_log_incompat &
XFS_SB_FEAT_INCOMPAT_LOG_UNKNOWN));
return -EFSCORRUPTED;
}
/*
* We can't read verify the sb LSN because the read verifier is called
* before the log is allocated and processed. We know the log is set up
* before write verifier calls, so check it here.
*/
if (!xfs_log_check_lsn(mp, sbp->sb_lsn))
return -EFSCORRUPTED;
return 0;
}
/* Check the validity of the SB. */
STATIC int
xfs_validate_sb_common(
struct xfs_mount *mp,
struct xfs_buf *bp,
struct xfs_sb *sbp)
{
struct xfs_dsb *dsb = XFS_BUF_TO_SBP(bp);
uint32_t agcount = 0;
uint32_t rem;
if (!xfs_verify_magic(bp, dsb->sb_magicnum)) {
xfs_warn(mp, "bad magic number");
return -EWRONGFS;
}
if (!xfs_sb_good_version(sbp)) {
xfs_warn(mp, "bad version");
return -EWRONGFS;
}
if (xfs_sb_version_has_pquotino(sbp)) {
if (sbp->sb_qflags & (XFS_OQUOTA_ENFD | XFS_OQUOTA_CHKD)) {
xfs_notice(mp,
"Version 5 of Super block has XFS_OQUOTA bits.");
return -EFSCORRUPTED;
}
} else if (sbp->sb_qflags & (XFS_PQUOTA_ENFD | XFS_GQUOTA_ENFD |
XFS_PQUOTA_CHKD | XFS_GQUOTA_CHKD)) {
xfs_notice(mp,
"Superblock earlier than Version 5 has XFS_[PQ]UOTA_{ENFD|CHKD} bits.");
return -EFSCORRUPTED;
}
/*
* Full inode chunks must be aligned to inode chunk size when
* sparse inodes are enabled to support the sparse chunk
* allocation algorithm and prevent overlapping inode records.
*/
if (xfs_sb_version_hassparseinodes(sbp)) {
uint32_t align;
align = XFS_INODES_PER_CHUNK * sbp->sb_inodesize
>> sbp->sb_blocklog;
if (sbp->sb_inoalignmt != align) {
xfs_warn(mp,
"Inode block alignment (%u) must match chunk size (%u) for sparse inodes.",
sbp->sb_inoalignmt, align);
return -EINVAL;
}
}
if (unlikely(
sbp->sb_logstart == 0 && mp->m_logdev_targp == mp->m_ddev_targp)) {
xfs_warn(mp,
"filesystem is marked as having an external log; "
"specify logdev on the mount command line.");
return -EINVAL;
}
if (unlikely(
sbp->sb_logstart != 0 && mp->m_logdev_targp != mp->m_ddev_targp)) {
xfs_warn(mp,
"filesystem is marked as having an internal log; "
"do not specify logdev on the mount command line.");
return -EINVAL;
}
/* Compute agcount for this number of dblocks and agblocks */
if (sbp->sb_agblocks) {
agcount = div_u64_rem(sbp->sb_dblocks, sbp->sb_agblocks, &rem);
if (rem)
agcount++;
}
/*
* More sanity checking. Most of these were stolen directly from
* xfs_repair.
*/
if (unlikely(
sbp->sb_agcount <= 0 ||
sbp->sb_sectsize < XFS_MIN_SECTORSIZE ||
sbp->sb_sectsize > XFS_MAX_SECTORSIZE ||
sbp->sb_sectlog < XFS_MIN_SECTORSIZE_LOG ||
sbp->sb_sectlog > XFS_MAX_SECTORSIZE_LOG ||
sbp->sb_sectsize != (1 << sbp->sb_sectlog) ||
sbp->sb_blocksize < XFS_MIN_BLOCKSIZE ||
sbp->sb_blocksize > XFS_MAX_BLOCKSIZE ||
sbp->sb_blocklog < XFS_MIN_BLOCKSIZE_LOG ||
sbp->sb_blocklog > XFS_MAX_BLOCKSIZE_LOG ||
sbp->sb_blocksize != (1 << sbp->sb_blocklog) ||
sbp->sb_dirblklog + sbp->sb_blocklog > XFS_MAX_BLOCKSIZE_LOG ||
sbp->sb_inodesize < XFS_DINODE_MIN_SIZE ||
sbp->sb_inodesize > XFS_DINODE_MAX_SIZE ||
sbp->sb_inodelog < XFS_DINODE_MIN_LOG ||
sbp->sb_inodelog > XFS_DINODE_MAX_LOG ||
sbp->sb_inodesize != (1 << sbp->sb_inodelog) ||
sbp->sb_logsunit > XLOG_MAX_RECORD_BSIZE ||
sbp->sb_inopblock != howmany(sbp->sb_blocksize,sbp->sb_inodesize) ||
XFS_FSB_TO_B(mp, sbp->sb_agblocks) < XFS_MIN_AG_BYTES ||
XFS_FSB_TO_B(mp, sbp->sb_agblocks) > XFS_MAX_AG_BYTES ||
sbp->sb_agblklog != xfs_highbit32(sbp->sb_agblocks - 1) + 1 ||
agcount == 0 || agcount != sbp->sb_agcount ||
(sbp->sb_blocklog - sbp->sb_inodelog != sbp->sb_inopblog) ||
(sbp->sb_rextsize * sbp->sb_blocksize > XFS_MAX_RTEXTSIZE) ||
(sbp->sb_rextsize * sbp->sb_blocksize < XFS_MIN_RTEXTSIZE) ||
(sbp->sb_imax_pct > 100 /* zero sb_imax_pct is valid */) ||
sbp->sb_dblocks == 0 ||
sbp->sb_dblocks > XFS_MAX_DBLOCKS(sbp) ||
sbp->sb_dblocks < XFS_MIN_DBLOCKS(sbp) ||
sbp->sb_shared_vn != 0)) {
xfs_notice(mp, "SB sanity check failed");
return -EFSCORRUPTED;
}
xfs: catch bad stripe alignment configurations When stripe alignments are invalid, data alignment algorithms in the allocator may not work correctly. Ensure we catch superblocks with invalid stripe alignment setups at mount time. These data alignment mismatches are now detected at mount time like this: XFS (loop0): SB stripe unit sanity check failed XFS (loop0): Metadata corruption detected at xfs_sb_read_verify+0xab/0x110, xfs_sb block 0xffffffffffffffff XFS (loop0): Unmount and run xfs_repair XFS (loop0): First 128 bytes of corrupted metadata buffer: 0000000091c2de02: 58 46 53 42 00 00 10 00 00 00 00 00 00 00 10 00 XFSB............ 0000000023bff869: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00000000cdd8c893: 17 32 37 15 ff ca 46 3d 9a 17 d3 33 04 b5 f1 a2 .27...F=...3.... 000000009fd2844f: 00 00 00 00 00 00 00 04 00 00 00 00 00 00 06 d0 ................ 0000000088e9b0bb: 00 00 00 00 00 00 06 d1 00 00 00 00 00 00 06 d2 ................ 00000000ff233a20: 00 00 00 01 00 00 10 00 00 00 00 01 00 00 00 00 ................ 000000009db0ac8b: 00 00 03 60 e1 34 02 00 08 00 00 02 00 00 00 00 ...`.4.......... 00000000f7022460: 00 00 00 00 00 00 00 00 0c 09 0b 01 0c 00 00 19 ................ XFS (loop0): SB validate failed with error -117. And the mount fails. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-06-05 17:06:16 +00:00
if (sbp->sb_unit) {
if (!xfs_sb_version_hasdalign(sbp) ||
sbp->sb_unit > sbp->sb_width ||
(sbp->sb_width % sbp->sb_unit) != 0) {
xfs_notice(mp, "SB stripe unit sanity check failed");
return -EFSCORRUPTED;
}
} else if (xfs_sb_version_hasdalign(sbp)) {
xfs_notice(mp, "SB stripe alignment sanity check failed");
return -EFSCORRUPTED;
} else if (sbp->sb_width) {
xfs_notice(mp, "SB stripe width sanity check failed");
return -EFSCORRUPTED;
}
if (xfs_sb_version_hascrc(&mp->m_sb) &&
sbp->sb_blocksize < XFS_MIN_CRC_BLOCKSIZE) {
xfs_notice(mp, "v5 SB sanity check failed");
return -EFSCORRUPTED;
}
/*
* Until this is fixed only page-sized or smaller data blocks work.
*/
if (unlikely(sbp->sb_blocksize > PAGE_SIZE)) {
xfs_warn(mp,
"File system with blocksize %d bytes. "
"Only pagesize (%ld) or less will currently work.",
sbp->sb_blocksize, PAGE_SIZE);
return -ENOSYS;
}
/*
* Currently only very few inode sizes are supported.
*/
switch (sbp->sb_inodesize) {
case 256:
case 512:
case 1024:
case 2048:
break;
default:
xfs_warn(mp, "inode size of %d bytes not supported",
sbp->sb_inodesize);
return -ENOSYS;
}
if (xfs_sb_validate_fsb_count(sbp, sbp->sb_dblocks) ||
xfs_sb_validate_fsb_count(sbp, sbp->sb_rblocks)) {
xfs_warn(mp,
"file system too large to be mounted on this system.");
return -EFBIG;
}
/*
* Don't touch the filesystem if a user tool thinks it owns the primary
* superblock. mkfs doesn't clear the flag from secondary supers, so
* we don't check them at all.
*/
if (XFS_BUF_ADDR(bp) == XFS_SB_DADDR && sbp->sb_inprogress) {
xfs_warn(mp, "Offline file system operation in progress!");
return -EFSCORRUPTED;
}
return 0;
}
void
xfs_sb_quota_from_disk(struct xfs_sb *sbp)
{
/*
* older mkfs doesn't initialize quota inodes to NULLFSINO. This
* leads to in-core values having two different values for a quota
* inode to be invalid: 0 and NULLFSINO. Change it to a single value
* NULLFSINO.
*
* Note that this change affect only the in-core values. These
* values are not written back to disk unless any quota information
* is written to the disk. Even in that case, sb_pquotino field is
* not written to disk unless the superblock supports pquotino.
*/
if (sbp->sb_uquotino == 0)
sbp->sb_uquotino = NULLFSINO;
if (sbp->sb_gquotino == 0)
sbp->sb_gquotino = NULLFSINO;
if (sbp->sb_pquotino == 0)
sbp->sb_pquotino = NULLFSINO;
/*
* We need to do these manipilations only if we are working
* with an older version of on-disk superblock.
*/
if (xfs_sb_version_has_pquotino(sbp))
return;
if (sbp->sb_qflags & XFS_OQUOTA_ENFD)
sbp->sb_qflags |= (sbp->sb_qflags & XFS_PQUOTA_ACCT) ?
XFS_PQUOTA_ENFD : XFS_GQUOTA_ENFD;
if (sbp->sb_qflags & XFS_OQUOTA_CHKD)
sbp->sb_qflags |= (sbp->sb_qflags & XFS_PQUOTA_ACCT) ?
XFS_PQUOTA_CHKD : XFS_GQUOTA_CHKD;
sbp->sb_qflags &= ~(XFS_OQUOTA_ENFD | XFS_OQUOTA_CHKD);
if (sbp->sb_qflags & XFS_PQUOTA_ACCT &&
sbp->sb_gquotino != NULLFSINO) {
/*
* In older version of superblock, on-disk superblock only
* has sb_gquotino, and in-core superblock has both sb_gquotino
* and sb_pquotino. But, only one of them is supported at any
* point of time. So, if PQUOTA is set in disk superblock,
* copy over sb_gquotino to sb_pquotino. The NULLFSINO test
* above is to make sure we don't do this twice and wipe them
* both out!
*/
sbp->sb_pquotino = sbp->sb_gquotino;
sbp->sb_gquotino = NULLFSINO;
}
}
static void
__xfs_sb_from_disk(
struct xfs_sb *to,
xfs_dsb_t *from,
bool convert_xquota)
{
to->sb_magicnum = be32_to_cpu(from->sb_magicnum);
to->sb_blocksize = be32_to_cpu(from->sb_blocksize);
to->sb_dblocks = be64_to_cpu(from->sb_dblocks);
to->sb_rblocks = be64_to_cpu(from->sb_rblocks);
to->sb_rextents = be64_to_cpu(from->sb_rextents);
memcpy(&to->sb_uuid, &from->sb_uuid, sizeof(to->sb_uuid));
to->sb_logstart = be64_to_cpu(from->sb_logstart);
to->sb_rootino = be64_to_cpu(from->sb_rootino);
to->sb_rbmino = be64_to_cpu(from->sb_rbmino);
to->sb_rsumino = be64_to_cpu(from->sb_rsumino);
to->sb_rextsize = be32_to_cpu(from->sb_rextsize);
to->sb_agblocks = be32_to_cpu(from->sb_agblocks);
to->sb_agcount = be32_to_cpu(from->sb_agcount);
to->sb_rbmblocks = be32_to_cpu(from->sb_rbmblocks);
to->sb_logblocks = be32_to_cpu(from->sb_logblocks);
to->sb_versionnum = be16_to_cpu(from->sb_versionnum);
to->sb_sectsize = be16_to_cpu(from->sb_sectsize);
to->sb_inodesize = be16_to_cpu(from->sb_inodesize);
to->sb_inopblock = be16_to_cpu(from->sb_inopblock);
memcpy(&to->sb_fname, &from->sb_fname, sizeof(to->sb_fname));
to->sb_blocklog = from->sb_blocklog;
to->sb_sectlog = from->sb_sectlog;
to->sb_inodelog = from->sb_inodelog;
to->sb_inopblog = from->sb_inopblog;
to->sb_agblklog = from->sb_agblklog;
to->sb_rextslog = from->sb_rextslog;
to->sb_inprogress = from->sb_inprogress;
to->sb_imax_pct = from->sb_imax_pct;
to->sb_icount = be64_to_cpu(from->sb_icount);
to->sb_ifree = be64_to_cpu(from->sb_ifree);
to->sb_fdblocks = be64_to_cpu(from->sb_fdblocks);
to->sb_frextents = be64_to_cpu(from->sb_frextents);
to->sb_uquotino = be64_to_cpu(from->sb_uquotino);
to->sb_gquotino = be64_to_cpu(from->sb_gquotino);
to->sb_qflags = be16_to_cpu(from->sb_qflags);
to->sb_flags = from->sb_flags;
to->sb_shared_vn = from->sb_shared_vn;
to->sb_inoalignmt = be32_to_cpu(from->sb_inoalignmt);
to->sb_unit = be32_to_cpu(from->sb_unit);
to->sb_width = be32_to_cpu(from->sb_width);
to->sb_dirblklog = from->sb_dirblklog;
to->sb_logsectlog = from->sb_logsectlog;
to->sb_logsectsize = be16_to_cpu(from->sb_logsectsize);
to->sb_logsunit = be32_to_cpu(from->sb_logsunit);
to->sb_features2 = be32_to_cpu(from->sb_features2);
to->sb_bad_features2 = be32_to_cpu(from->sb_bad_features2);
to->sb_features_compat = be32_to_cpu(from->sb_features_compat);
to->sb_features_ro_compat = be32_to_cpu(from->sb_features_ro_compat);
to->sb_features_incompat = be32_to_cpu(from->sb_features_incompat);
to->sb_features_log_incompat =
be32_to_cpu(from->sb_features_log_incompat);
/* crc is only used on disk, not in memory; just init to 0 here. */
to->sb_crc = 0;
to->sb_spino_align = be32_to_cpu(from->sb_spino_align);
to->sb_pquotino = be64_to_cpu(from->sb_pquotino);
to->sb_lsn = be64_to_cpu(from->sb_lsn);
/*
* sb_meta_uuid is only on disk if it differs from sb_uuid and the
* feature flag is set; if not set we keep it only in memory.
*/
if (xfs_sb_version_hasmetauuid(to))
uuid_copy(&to->sb_meta_uuid, &from->sb_meta_uuid);
else
uuid_copy(&to->sb_meta_uuid, &from->sb_uuid);
/* Convert on-disk flags to in-memory flags? */
if (convert_xquota)
xfs_sb_quota_from_disk(to);
}
void
xfs_sb_from_disk(
struct xfs_sb *to,
xfs_dsb_t *from)
{
__xfs_sb_from_disk(to, from, true);
}
xfs: remove bitfield based superblock updates When we log changes to the superblock, we first have to write them to the on-disk buffer, and then log that. Right now we have a complex bitfield based arrangement to only write the modified field to the buffer before we log it. This used to be necessary as a performance optimisation because we logged the superblock buffer in every extent or inode allocation or freeing, and so performance was extremely important. We haven't done this for years, however, ever since the lazy superblock counters pulled the superblock logging out of the transaction commit fast path. Hence we have a bunch of complexity that is not necessary that makes writing the in-core superblock to disk much more complex than it needs to be. We only need to log the superblock now during management operations (e.g. during mount, unmount or quota control operations) so it is not a performance critical path anymore. As such, remove the complex field based logging mechanism and replace it with a simple conversion function similar to what we use for all other on-disk structures. This means we always log the entirity of the superblock, but again because we rarely modify the superblock this is not an issue for log bandwidth or CPU time. Indeed, if we do log the superblock frequently, delayed logging will minimise the impact of this overhead. [Fixed gquota/pquota inode sharing regression noticed by bfoster.] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-01-21 22:10:26 +00:00
static void
xfs_sb_quota_to_disk(
xfs: remove bitfield based superblock updates When we log changes to the superblock, we first have to write them to the on-disk buffer, and then log that. Right now we have a complex bitfield based arrangement to only write the modified field to the buffer before we log it. This used to be necessary as a performance optimisation because we logged the superblock buffer in every extent or inode allocation or freeing, and so performance was extremely important. We haven't done this for years, however, ever since the lazy superblock counters pulled the superblock logging out of the transaction commit fast path. Hence we have a bunch of complexity that is not necessary that makes writing the in-core superblock to disk much more complex than it needs to be. We only need to log the superblock now during management operations (e.g. during mount, unmount or quota control operations) so it is not a performance critical path anymore. As such, remove the complex field based logging mechanism and replace it with a simple conversion function similar to what we use for all other on-disk structures. This means we always log the entirity of the superblock, but again because we rarely modify the superblock this is not an issue for log bandwidth or CPU time. Indeed, if we do log the superblock frequently, delayed logging will minimise the impact of this overhead. [Fixed gquota/pquota inode sharing regression noticed by bfoster.] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-01-21 22:10:26 +00:00
struct xfs_dsb *to,
struct xfs_sb *from)
{
uint16_t qflags = from->sb_qflags;
xfs: remove bitfield based superblock updates When we log changes to the superblock, we first have to write them to the on-disk buffer, and then log that. Right now we have a complex bitfield based arrangement to only write the modified field to the buffer before we log it. This used to be necessary as a performance optimisation because we logged the superblock buffer in every extent or inode allocation or freeing, and so performance was extremely important. We haven't done this for years, however, ever since the lazy superblock counters pulled the superblock logging out of the transaction commit fast path. Hence we have a bunch of complexity that is not necessary that makes writing the in-core superblock to disk much more complex than it needs to be. We only need to log the superblock now during management operations (e.g. during mount, unmount or quota control operations) so it is not a performance critical path anymore. As such, remove the complex field based logging mechanism and replace it with a simple conversion function similar to what we use for all other on-disk structures. This means we always log the entirity of the superblock, but again because we rarely modify the superblock this is not an issue for log bandwidth or CPU time. Indeed, if we do log the superblock frequently, delayed logging will minimise the impact of this overhead. [Fixed gquota/pquota inode sharing regression noticed by bfoster.] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-01-21 22:10:26 +00:00
to->sb_uquotino = cpu_to_be64(from->sb_uquotino);
if (xfs_sb_version_has_pquotino(from)) {
to->sb_qflags = cpu_to_be16(from->sb_qflags);
to->sb_gquotino = cpu_to_be64(from->sb_gquotino);
to->sb_pquotino = cpu_to_be64(from->sb_pquotino);
return;
}
/*
xfs: remove bitfield based superblock updates When we log changes to the superblock, we first have to write them to the on-disk buffer, and then log that. Right now we have a complex bitfield based arrangement to only write the modified field to the buffer before we log it. This used to be necessary as a performance optimisation because we logged the superblock buffer in every extent or inode allocation or freeing, and so performance was extremely important. We haven't done this for years, however, ever since the lazy superblock counters pulled the superblock logging out of the transaction commit fast path. Hence we have a bunch of complexity that is not necessary that makes writing the in-core superblock to disk much more complex than it needs to be. We only need to log the superblock now during management operations (e.g. during mount, unmount or quota control operations) so it is not a performance critical path anymore. As such, remove the complex field based logging mechanism and replace it with a simple conversion function similar to what we use for all other on-disk structures. This means we always log the entirity of the superblock, but again because we rarely modify the superblock this is not an issue for log bandwidth or CPU time. Indeed, if we do log the superblock frequently, delayed logging will minimise the impact of this overhead. [Fixed gquota/pquota inode sharing regression noticed by bfoster.] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-01-21 22:10:26 +00:00
* The in-core version of sb_qflags do not have XFS_OQUOTA_*
* flags, whereas the on-disk version does. So, convert incore
* XFS_{PG}QUOTA_* flags to on-disk XFS_OQUOTA_* flags.
*/
xfs: remove bitfield based superblock updates When we log changes to the superblock, we first have to write them to the on-disk buffer, and then log that. Right now we have a complex bitfield based arrangement to only write the modified field to the buffer before we log it. This used to be necessary as a performance optimisation because we logged the superblock buffer in every extent or inode allocation or freeing, and so performance was extremely important. We haven't done this for years, however, ever since the lazy superblock counters pulled the superblock logging out of the transaction commit fast path. Hence we have a bunch of complexity that is not necessary that makes writing the in-core superblock to disk much more complex than it needs to be. We only need to log the superblock now during management operations (e.g. during mount, unmount or quota control operations) so it is not a performance critical path anymore. As such, remove the complex field based logging mechanism and replace it with a simple conversion function similar to what we use for all other on-disk structures. This means we always log the entirity of the superblock, but again because we rarely modify the superblock this is not an issue for log bandwidth or CPU time. Indeed, if we do log the superblock frequently, delayed logging will minimise the impact of this overhead. [Fixed gquota/pquota inode sharing regression noticed by bfoster.] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-01-21 22:10:26 +00:00
qflags &= ~(XFS_PQUOTA_ENFD | XFS_PQUOTA_CHKD |
XFS_GQUOTA_ENFD | XFS_GQUOTA_CHKD);
xfs: remove bitfield based superblock updates When we log changes to the superblock, we first have to write them to the on-disk buffer, and then log that. Right now we have a complex bitfield based arrangement to only write the modified field to the buffer before we log it. This used to be necessary as a performance optimisation because we logged the superblock buffer in every extent or inode allocation or freeing, and so performance was extremely important. We haven't done this for years, however, ever since the lazy superblock counters pulled the superblock logging out of the transaction commit fast path. Hence we have a bunch of complexity that is not necessary that makes writing the in-core superblock to disk much more complex than it needs to be. We only need to log the superblock now during management operations (e.g. during mount, unmount or quota control operations) so it is not a performance critical path anymore. As such, remove the complex field based logging mechanism and replace it with a simple conversion function similar to what we use for all other on-disk structures. This means we always log the entirity of the superblock, but again because we rarely modify the superblock this is not an issue for log bandwidth or CPU time. Indeed, if we do log the superblock frequently, delayed logging will minimise the impact of this overhead. [Fixed gquota/pquota inode sharing regression noticed by bfoster.] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-01-21 22:10:26 +00:00
if (from->sb_qflags &
(XFS_PQUOTA_ENFD | XFS_GQUOTA_ENFD))
qflags |= XFS_OQUOTA_ENFD;
if (from->sb_qflags &
(XFS_PQUOTA_CHKD | XFS_GQUOTA_CHKD))
qflags |= XFS_OQUOTA_CHKD;
to->sb_qflags = cpu_to_be16(qflags);
/*
xfs: remove bitfield based superblock updates When we log changes to the superblock, we first have to write them to the on-disk buffer, and then log that. Right now we have a complex bitfield based arrangement to only write the modified field to the buffer before we log it. This used to be necessary as a performance optimisation because we logged the superblock buffer in every extent or inode allocation or freeing, and so performance was extremely important. We haven't done this for years, however, ever since the lazy superblock counters pulled the superblock logging out of the transaction commit fast path. Hence we have a bunch of complexity that is not necessary that makes writing the in-core superblock to disk much more complex than it needs to be. We only need to log the superblock now during management operations (e.g. during mount, unmount or quota control operations) so it is not a performance critical path anymore. As such, remove the complex field based logging mechanism and replace it with a simple conversion function similar to what we use for all other on-disk structures. This means we always log the entirity of the superblock, but again because we rarely modify the superblock this is not an issue for log bandwidth or CPU time. Indeed, if we do log the superblock frequently, delayed logging will minimise the impact of this overhead. [Fixed gquota/pquota inode sharing regression noticed by bfoster.] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-01-21 22:10:26 +00:00
* GQUOTINO and PQUOTINO cannot be used together in versions
* of superblock that do not have pquotino. from->sb_flags
* tells us which quota is active and should be copied to
* disk. If neither are active, we should NULL the inode.
xfs: null unused quota inodes when quota is on When quota is on, it is expected that unused quota inodes have a value of NULLFSINO. The changes to support a separate project quota in 3.12 broken this rule for non-project quota inode enabled filesystem, as the code now refuses to write the group quota inode if neither group or project quotas are enabled. This regression was introduced by commit d892d58 ("xfs: Start using pquotaino from the superblock"). In this case, we should be writing NULLFSINO rather than nothing to ensure that we leave the group quota inode in a valid state while quotas are enabled. Failure to do so doesn't cause a current kernel to break - the separate project quota inodes introduced translation code to always treat a zero inode as NULLFSINO. This was introduced by commit 0102629 ("xfs: Initialize all quota inodes to be NULLFSINO") with is also in 3.12 but older kernels do not do this and hence taking a filesystem back to an older kernel can result in quotas failing initialisation at mount time. When that happens, we see this in dmesg: [ 1649.215390] XFS (sdb): Mounting Filesystem [ 1649.316894] XFS (sdb): Failed to initialize disk quotas. [ 1649.316902] XFS (sdb): Ending clean mount By ensuring that we write NULLFSINO to quota inodes that aren't active, we avoid this problem. We have to be really careful when determining if the quota inodes are active or not, because we don't want to write a NULLFSINO if the quota inodes are active and we simply aren't updating them. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-07-14 21:28:41 +00:00
*
xfs: remove bitfield based superblock updates When we log changes to the superblock, we first have to write them to the on-disk buffer, and then log that. Right now we have a complex bitfield based arrangement to only write the modified field to the buffer before we log it. This used to be necessary as a performance optimisation because we logged the superblock buffer in every extent or inode allocation or freeing, and so performance was extremely important. We haven't done this for years, however, ever since the lazy superblock counters pulled the superblock logging out of the transaction commit fast path. Hence we have a bunch of complexity that is not necessary that makes writing the in-core superblock to disk much more complex than it needs to be. We only need to log the superblock now during management operations (e.g. during mount, unmount or quota control operations) so it is not a performance critical path anymore. As such, remove the complex field based logging mechanism and replace it with a simple conversion function similar to what we use for all other on-disk structures. This means we always log the entirity of the superblock, but again because we rarely modify the superblock this is not an issue for log bandwidth or CPU time. Indeed, if we do log the superblock frequently, delayed logging will minimise the impact of this overhead. [Fixed gquota/pquota inode sharing regression noticed by bfoster.] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-01-21 22:10:26 +00:00
* In all cases, the separate pquotino must remain 0 because it
* it beyond the "end" of the valid non-pquotino superblock.
*/
xfs: remove bitfield based superblock updates When we log changes to the superblock, we first have to write them to the on-disk buffer, and then log that. Right now we have a complex bitfield based arrangement to only write the modified field to the buffer before we log it. This used to be necessary as a performance optimisation because we logged the superblock buffer in every extent or inode allocation or freeing, and so performance was extremely important. We haven't done this for years, however, ever since the lazy superblock counters pulled the superblock logging out of the transaction commit fast path. Hence we have a bunch of complexity that is not necessary that makes writing the in-core superblock to disk much more complex than it needs to be. We only need to log the superblock now during management operations (e.g. during mount, unmount or quota control operations) so it is not a performance critical path anymore. As such, remove the complex field based logging mechanism and replace it with a simple conversion function similar to what we use for all other on-disk structures. This means we always log the entirity of the superblock, but again because we rarely modify the superblock this is not an issue for log bandwidth or CPU time. Indeed, if we do log the superblock frequently, delayed logging will minimise the impact of this overhead. [Fixed gquota/pquota inode sharing regression noticed by bfoster.] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-01-21 22:10:26 +00:00
if (from->sb_qflags & XFS_GQUOTA_ACCT)
to->sb_gquotino = cpu_to_be64(from->sb_gquotino);
xfs: remove bitfield based superblock updates When we log changes to the superblock, we first have to write them to the on-disk buffer, and then log that. Right now we have a complex bitfield based arrangement to only write the modified field to the buffer before we log it. This used to be necessary as a performance optimisation because we logged the superblock buffer in every extent or inode allocation or freeing, and so performance was extremely important. We haven't done this for years, however, ever since the lazy superblock counters pulled the superblock logging out of the transaction commit fast path. Hence we have a bunch of complexity that is not necessary that makes writing the in-core superblock to disk much more complex than it needs to be. We only need to log the superblock now during management operations (e.g. during mount, unmount or quota control operations) so it is not a performance critical path anymore. As such, remove the complex field based logging mechanism and replace it with a simple conversion function similar to what we use for all other on-disk structures. This means we always log the entirity of the superblock, but again because we rarely modify the superblock this is not an issue for log bandwidth or CPU time. Indeed, if we do log the superblock frequently, delayed logging will minimise the impact of this overhead. [Fixed gquota/pquota inode sharing regression noticed by bfoster.] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-01-21 22:10:26 +00:00
else if (from->sb_qflags & XFS_PQUOTA_ACCT)
to->sb_gquotino = cpu_to_be64(from->sb_pquotino);
xfs: null unused quota inodes when quota is on When quota is on, it is expected that unused quota inodes have a value of NULLFSINO. The changes to support a separate project quota in 3.12 broken this rule for non-project quota inode enabled filesystem, as the code now refuses to write the group quota inode if neither group or project quotas are enabled. This regression was introduced by commit d892d58 ("xfs: Start using pquotaino from the superblock"). In this case, we should be writing NULLFSINO rather than nothing to ensure that we leave the group quota inode in a valid state while quotas are enabled. Failure to do so doesn't cause a current kernel to break - the separate project quota inodes introduced translation code to always treat a zero inode as NULLFSINO. This was introduced by commit 0102629 ("xfs: Initialize all quota inodes to be NULLFSINO") with is also in 3.12 but older kernels do not do this and hence taking a filesystem back to an older kernel can result in quotas failing initialisation at mount time. When that happens, we see this in dmesg: [ 1649.215390] XFS (sdb): Mounting Filesystem [ 1649.316894] XFS (sdb): Failed to initialize disk quotas. [ 1649.316902] XFS (sdb): Ending clean mount By ensuring that we write NULLFSINO to quota inodes that aren't active, we avoid this problem. We have to be really careful when determining if the quota inodes are active or not, because we don't want to write a NULLFSINO if the quota inodes are active and we simply aren't updating them. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-07-14 21:28:41 +00:00
else {
/*
* We can't rely on just the fields being logged to tell us
* that it is safe to write NULLFSINO - we should only do that
* if quotas are not actually enabled. Hence only write
* NULLFSINO if both in-core quota inodes are NULL.
*/
if (from->sb_gquotino == NULLFSINO &&
from->sb_pquotino == NULLFSINO)
to->sb_gquotino = cpu_to_be64(NULLFSINO);
}
xfs: remove bitfield based superblock updates When we log changes to the superblock, we first have to write them to the on-disk buffer, and then log that. Right now we have a complex bitfield based arrangement to only write the modified field to the buffer before we log it. This used to be necessary as a performance optimisation because we logged the superblock buffer in every extent or inode allocation or freeing, and so performance was extremely important. We haven't done this for years, however, ever since the lazy superblock counters pulled the superblock logging out of the transaction commit fast path. Hence we have a bunch of complexity that is not necessary that makes writing the in-core superblock to disk much more complex than it needs to be. We only need to log the superblock now during management operations (e.g. during mount, unmount or quota control operations) so it is not a performance critical path anymore. As such, remove the complex field based logging mechanism and replace it with a simple conversion function similar to what we use for all other on-disk structures. This means we always log the entirity of the superblock, but again because we rarely modify the superblock this is not an issue for log bandwidth or CPU time. Indeed, if we do log the superblock frequently, delayed logging will minimise the impact of this overhead. [Fixed gquota/pquota inode sharing regression noticed by bfoster.] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-01-21 22:10:26 +00:00
to->sb_pquotino = 0;
}
void
xfs_sb_to_disk(
xfs: remove bitfield based superblock updates When we log changes to the superblock, we first have to write them to the on-disk buffer, and then log that. Right now we have a complex bitfield based arrangement to only write the modified field to the buffer before we log it. This used to be necessary as a performance optimisation because we logged the superblock buffer in every extent or inode allocation or freeing, and so performance was extremely important. We haven't done this for years, however, ever since the lazy superblock counters pulled the superblock logging out of the transaction commit fast path. Hence we have a bunch of complexity that is not necessary that makes writing the in-core superblock to disk much more complex than it needs to be. We only need to log the superblock now during management operations (e.g. during mount, unmount or quota control operations) so it is not a performance critical path anymore. As such, remove the complex field based logging mechanism and replace it with a simple conversion function similar to what we use for all other on-disk structures. This means we always log the entirity of the superblock, but again because we rarely modify the superblock this is not an issue for log bandwidth or CPU time. Indeed, if we do log the superblock frequently, delayed logging will minimise the impact of this overhead. [Fixed gquota/pquota inode sharing regression noticed by bfoster.] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-01-21 22:10:26 +00:00
struct xfs_dsb *to,
struct xfs_sb *from)
{
xfs: remove bitfield based superblock updates When we log changes to the superblock, we first have to write them to the on-disk buffer, and then log that. Right now we have a complex bitfield based arrangement to only write the modified field to the buffer before we log it. This used to be necessary as a performance optimisation because we logged the superblock buffer in every extent or inode allocation or freeing, and so performance was extremely important. We haven't done this for years, however, ever since the lazy superblock counters pulled the superblock logging out of the transaction commit fast path. Hence we have a bunch of complexity that is not necessary that makes writing the in-core superblock to disk much more complex than it needs to be. We only need to log the superblock now during management operations (e.g. during mount, unmount or quota control operations) so it is not a performance critical path anymore. As such, remove the complex field based logging mechanism and replace it with a simple conversion function similar to what we use for all other on-disk structures. This means we always log the entirity of the superblock, but again because we rarely modify the superblock this is not an issue for log bandwidth or CPU time. Indeed, if we do log the superblock frequently, delayed logging will minimise the impact of this overhead. [Fixed gquota/pquota inode sharing regression noticed by bfoster.] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-01-21 22:10:26 +00:00
xfs_sb_quota_to_disk(to, from);
to->sb_magicnum = cpu_to_be32(from->sb_magicnum);
to->sb_blocksize = cpu_to_be32(from->sb_blocksize);
to->sb_dblocks = cpu_to_be64(from->sb_dblocks);
to->sb_rblocks = cpu_to_be64(from->sb_rblocks);
to->sb_rextents = cpu_to_be64(from->sb_rextents);
memcpy(&to->sb_uuid, &from->sb_uuid, sizeof(to->sb_uuid));
to->sb_logstart = cpu_to_be64(from->sb_logstart);
to->sb_rootino = cpu_to_be64(from->sb_rootino);
to->sb_rbmino = cpu_to_be64(from->sb_rbmino);
to->sb_rsumino = cpu_to_be64(from->sb_rsumino);
to->sb_rextsize = cpu_to_be32(from->sb_rextsize);
to->sb_agblocks = cpu_to_be32(from->sb_agblocks);
to->sb_agcount = cpu_to_be32(from->sb_agcount);
to->sb_rbmblocks = cpu_to_be32(from->sb_rbmblocks);
to->sb_logblocks = cpu_to_be32(from->sb_logblocks);
to->sb_versionnum = cpu_to_be16(from->sb_versionnum);
to->sb_sectsize = cpu_to_be16(from->sb_sectsize);
to->sb_inodesize = cpu_to_be16(from->sb_inodesize);
to->sb_inopblock = cpu_to_be16(from->sb_inopblock);
memcpy(&to->sb_fname, &from->sb_fname, sizeof(to->sb_fname));
to->sb_blocklog = from->sb_blocklog;
to->sb_sectlog = from->sb_sectlog;
to->sb_inodelog = from->sb_inodelog;
to->sb_inopblog = from->sb_inopblog;
to->sb_agblklog = from->sb_agblklog;
to->sb_rextslog = from->sb_rextslog;
to->sb_inprogress = from->sb_inprogress;
to->sb_imax_pct = from->sb_imax_pct;
to->sb_icount = cpu_to_be64(from->sb_icount);
to->sb_ifree = cpu_to_be64(from->sb_ifree);
to->sb_fdblocks = cpu_to_be64(from->sb_fdblocks);
to->sb_frextents = cpu_to_be64(from->sb_frextents);
xfs: remove bitfield based superblock updates When we log changes to the superblock, we first have to write them to the on-disk buffer, and then log that. Right now we have a complex bitfield based arrangement to only write the modified field to the buffer before we log it. This used to be necessary as a performance optimisation because we logged the superblock buffer in every extent or inode allocation or freeing, and so performance was extremely important. We haven't done this for years, however, ever since the lazy superblock counters pulled the superblock logging out of the transaction commit fast path. Hence we have a bunch of complexity that is not necessary that makes writing the in-core superblock to disk much more complex than it needs to be. We only need to log the superblock now during management operations (e.g. during mount, unmount or quota control operations) so it is not a performance critical path anymore. As such, remove the complex field based logging mechanism and replace it with a simple conversion function similar to what we use for all other on-disk structures. This means we always log the entirity of the superblock, but again because we rarely modify the superblock this is not an issue for log bandwidth or CPU time. Indeed, if we do log the superblock frequently, delayed logging will minimise the impact of this overhead. [Fixed gquota/pquota inode sharing regression noticed by bfoster.] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-01-21 22:10:26 +00:00
to->sb_flags = from->sb_flags;
to->sb_shared_vn = from->sb_shared_vn;
to->sb_inoalignmt = cpu_to_be32(from->sb_inoalignmt);
to->sb_unit = cpu_to_be32(from->sb_unit);
to->sb_width = cpu_to_be32(from->sb_width);
to->sb_dirblklog = from->sb_dirblklog;
to->sb_logsectlog = from->sb_logsectlog;
to->sb_logsectsize = cpu_to_be16(from->sb_logsectsize);
to->sb_logsunit = cpu_to_be32(from->sb_logsunit);
/*
* We need to ensure that bad_features2 always matches features2.
* Hence we enforce that here rather than having to remember to do it
* everywhere else that updates features2.
*/
from->sb_bad_features2 = from->sb_features2;
xfs: remove bitfield based superblock updates When we log changes to the superblock, we first have to write them to the on-disk buffer, and then log that. Right now we have a complex bitfield based arrangement to only write the modified field to the buffer before we log it. This used to be necessary as a performance optimisation because we logged the superblock buffer in every extent or inode allocation or freeing, and so performance was extremely important. We haven't done this for years, however, ever since the lazy superblock counters pulled the superblock logging out of the transaction commit fast path. Hence we have a bunch of complexity that is not necessary that makes writing the in-core superblock to disk much more complex than it needs to be. We only need to log the superblock now during management operations (e.g. during mount, unmount or quota control operations) so it is not a performance critical path anymore. As such, remove the complex field based logging mechanism and replace it with a simple conversion function similar to what we use for all other on-disk structures. This means we always log the entirity of the superblock, but again because we rarely modify the superblock this is not an issue for log bandwidth or CPU time. Indeed, if we do log the superblock frequently, delayed logging will minimise the impact of this overhead. [Fixed gquota/pquota inode sharing regression noticed by bfoster.] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-01-21 22:10:26 +00:00
to->sb_features2 = cpu_to_be32(from->sb_features2);
to->sb_bad_features2 = cpu_to_be32(from->sb_bad_features2);
if (xfs_sb_version_hascrc(from)) {
to->sb_features_compat = cpu_to_be32(from->sb_features_compat);
to->sb_features_ro_compat =
cpu_to_be32(from->sb_features_ro_compat);
to->sb_features_incompat =
cpu_to_be32(from->sb_features_incompat);
to->sb_features_log_incompat =
cpu_to_be32(from->sb_features_log_incompat);
to->sb_spino_align = cpu_to_be32(from->sb_spino_align);
xfs: remove bitfield based superblock updates When we log changes to the superblock, we first have to write them to the on-disk buffer, and then log that. Right now we have a complex bitfield based arrangement to only write the modified field to the buffer before we log it. This used to be necessary as a performance optimisation because we logged the superblock buffer in every extent or inode allocation or freeing, and so performance was extremely important. We haven't done this for years, however, ever since the lazy superblock counters pulled the superblock logging out of the transaction commit fast path. Hence we have a bunch of complexity that is not necessary that makes writing the in-core superblock to disk much more complex than it needs to be. We only need to log the superblock now during management operations (e.g. during mount, unmount or quota control operations) so it is not a performance critical path anymore. As such, remove the complex field based logging mechanism and replace it with a simple conversion function similar to what we use for all other on-disk structures. This means we always log the entirity of the superblock, but again because we rarely modify the superblock this is not an issue for log bandwidth or CPU time. Indeed, if we do log the superblock frequently, delayed logging will minimise the impact of this overhead. [Fixed gquota/pquota inode sharing regression noticed by bfoster.] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-01-21 22:10:26 +00:00
to->sb_lsn = cpu_to_be64(from->sb_lsn);
if (xfs_sb_version_hasmetauuid(from))
uuid_copy(&to->sb_meta_uuid, &from->sb_meta_uuid);
}
}
/*
* If the superblock has the CRC feature bit set or the CRC field is non-null,
* check that the CRC is valid. We check the CRC field is non-null because a
* single bit error could clear the feature bit and unused parts of the
* superblock are supposed to be zero. Hence a non-null crc field indicates that
* we've potentially lost a feature bit and we should check it anyway.
*
* However, past bugs (i.e. in growfs) left non-zeroed regions beyond the
* last field in V4 secondary superblocks. So for secondary superblocks,
* we are more forgiving, and ignore CRC failures if the primary doesn't
* indicate that the fs version is V5.
*/
static void
xfs_sb_read_verify(
struct xfs_buf *bp)
{
struct xfs_sb sb;
struct xfs_mount *mp = bp->b_mount;
struct xfs_dsb *dsb = XFS_BUF_TO_SBP(bp);
int error;
/*
* open code the version check to avoid needing to convert the entire
* superblock from disk order just to check the version number
*/
if (dsb->sb_magicnum == cpu_to_be32(XFS_SB_MAGIC) &&
(((be16_to_cpu(dsb->sb_versionnum) & XFS_SB_VERSION_NUMBITS) ==
XFS_SB_VERSION_5) ||
dsb->sb_crc != 0)) {
if (!xfs_buf_verify_cksum(bp, XFS_SB_CRC_OFF)) {
/* Only fail bad secondaries on a known V5 filesystem */
if (bp->b_bn == XFS_SB_DADDR ||
xfs_sb_version_hascrc(&mp->m_sb)) {
error = -EFSBADCRC;
goto out_error;
}
}
}
/*
* Check all the superblock fields. Don't byteswap the xquota flags
* because _verify_common checks the on-disk values.
*/
__xfs_sb_from_disk(&sb, XFS_BUF_TO_SBP(bp), false);
error = xfs_validate_sb_common(mp, bp, &sb);
if (error)
goto out_error;
error = xfs_validate_sb_read(mp, &sb);
out_error:
if (error == -EFSCORRUPTED || error == -EFSBADCRC)
xfs_verifier_error(bp, error, __this_address);
else if (error)
xfs_buf_ioerror(bp, error);
}
/*
* We may be probed for a filesystem match, so we may not want to emit
* messages when the superblock buffer is not actually an XFS superblock.
* If we find an XFS superblock, then run a normal, noisy mount because we are
* really going to mount it and want to know about errors.
*/
static void
xfs_sb_quiet_read_verify(
struct xfs_buf *bp)
{
struct xfs_dsb *dsb = XFS_BUF_TO_SBP(bp);
if (dsb->sb_magicnum == cpu_to_be32(XFS_SB_MAGIC)) {
/* XFS filesystem, verify noisily! */
xfs_sb_read_verify(bp);
return;
}
/* quietly fail */
xfs_buf_ioerror(bp, -EWRONGFS);
}
static void
xfs_sb_write_verify(
struct xfs_buf *bp)
{
struct xfs_sb sb;
struct xfs_mount *mp = bp->b_mount;
struct xfs_buf_log_item *bip = bp->b_log_item;
int error;
/*
* Check all the superblock fields. Don't byteswap the xquota flags
* because _verify_common checks the on-disk values.
*/
__xfs_sb_from_disk(&sb, XFS_BUF_TO_SBP(bp), false);
error = xfs_validate_sb_common(mp, bp, &sb);
if (error)
goto out_error;
error = xfs_validate_sb_write(mp, bp, &sb);
if (error)
goto out_error;
if (!xfs_sb_version_hascrc(&mp->m_sb))
return;
if (bip)
XFS_BUF_TO_SBP(bp)->sb_lsn = cpu_to_be64(bip->bli_item.li_lsn);
xfs_buf_update_cksum(bp, XFS_SB_CRC_OFF);
return;
out_error:
xfs_verifier_error(bp, error, __this_address);
}
const struct xfs_buf_ops xfs_sb_buf_ops = {
.name = "xfs_sb",
.magic = { cpu_to_be32(XFS_SB_MAGIC), cpu_to_be32(XFS_SB_MAGIC) },
.verify_read = xfs_sb_read_verify,
.verify_write = xfs_sb_write_verify,
};
const struct xfs_buf_ops xfs_sb_quiet_buf_ops = {
.name = "xfs_sb_quiet",
.magic = { cpu_to_be32(XFS_SB_MAGIC), cpu_to_be32(XFS_SB_MAGIC) },
.verify_read = xfs_sb_quiet_read_verify,
.verify_write = xfs_sb_write_verify,
};
/*
* xfs_mount_common
*
* Mount initialization code establishing various mount
* fields from the superblock associated with the given
* mount structure.
*
* Inode geometry are calculated in xfs_ialloc_setup_geometry.
*/
void
xfs_sb_mount_common(
struct xfs_mount *mp,
struct xfs_sb *sbp)
{
mp->m_agfrotor = mp->m_agirotor = 0;
mp->m_maxagi = mp->m_sb.sb_agcount;
mp->m_blkbit_log = sbp->sb_blocklog + XFS_NBBYLOG;
mp->m_blkbb_log = sbp->sb_blocklog - BBSHIFT;
mp->m_sectbb_log = sbp->sb_sectlog - BBSHIFT;
mp->m_agno_log = xfs_highbit32(sbp->sb_agcount - 1) + 1;
mp->m_blockmask = sbp->sb_blocksize - 1;
mp->m_blockwsize = sbp->sb_blocksize >> XFS_WORDLOG;
mp->m_blockwmask = mp->m_blockwsize - 1;
mp->m_alloc_mxr[0] = xfs_allocbt_maxrecs(mp, sbp->sb_blocksize, 1);
mp->m_alloc_mxr[1] = xfs_allocbt_maxrecs(mp, sbp->sb_blocksize, 0);
mp->m_alloc_mnr[0] = mp->m_alloc_mxr[0] / 2;
mp->m_alloc_mnr[1] = mp->m_alloc_mxr[1] / 2;
mp->m_bmap_dmxr[0] = xfs_bmbt_maxrecs(mp, sbp->sb_blocksize, 1);
mp->m_bmap_dmxr[1] = xfs_bmbt_maxrecs(mp, sbp->sb_blocksize, 0);
mp->m_bmap_dmnr[0] = mp->m_bmap_dmxr[0] / 2;
mp->m_bmap_dmnr[1] = mp->m_bmap_dmxr[1] / 2;
mp->m_rmap_mxr[0] = xfs_rmapbt_maxrecs(sbp->sb_blocksize, 1);
mp->m_rmap_mxr[1] = xfs_rmapbt_maxrecs(sbp->sb_blocksize, 0);
mp->m_rmap_mnr[0] = mp->m_rmap_mxr[0] / 2;
mp->m_rmap_mnr[1] = mp->m_rmap_mxr[1] / 2;
mp->m_refc_mxr[0] = xfs_refcountbt_maxrecs(sbp->sb_blocksize, true);
mp->m_refc_mxr[1] = xfs_refcountbt_maxrecs(sbp->sb_blocksize, false);
mp->m_refc_mnr[0] = mp->m_refc_mxr[0] / 2;
mp->m_refc_mnr[1] = mp->m_refc_mxr[1] / 2;
mp->m_bsize = XFS_FSB_TO_BB(mp, 1);
mp->m_alloc_set_aside = xfs_alloc_set_aside(mp);
mp->m_ag_max_usable = xfs_alloc_ag_max_usable(mp);
}
/*
* xfs_initialize_perag_data
*
* Read in each per-ag structure so we can count up the number of
* allocated inodes, free inodes and used filesystem blocks as this
* information is no longer persistent in the superblock. Once we have
* this information, write it into the in-core superblock structure.
*/
int
xfs_initialize_perag_data(
struct xfs_mount *mp,
xfs_agnumber_t agcount)
{
xfs_agnumber_t index;
xfs_perag_t *pag;
xfs_sb_t *sbp = &mp->m_sb;
uint64_t ifree = 0;
uint64_t ialloc = 0;
uint64_t bfree = 0;
uint64_t bfreelst = 0;
uint64_t btree = 0;
uint64_t fdblocks;
int error = 0;
for (index = 0; index < agcount; index++) {
/*
* read the agf, then the agi. This gets us
* all the information we need and populates the
* per-ag structures for us.
*/
error = xfs_alloc_pagf_init(mp, NULL, index, 0);
if (error)
return error;
error = xfs_ialloc_pagi_init(mp, NULL, index);
if (error)
return error;
pag = xfs_perag_get(mp, index);
ifree += pag->pagi_freecount;
ialloc += pag->pagi_count;
bfree += pag->pagf_freeblks;
bfreelst += pag->pagf_flcount;
btree += pag->pagf_btreeblks;
xfs_perag_put(pag);
}
fdblocks = bfree + bfreelst + btree;
/*
* If the new summary counts are obviously incorrect, fail the
* mount operation because that implies the AGFs are also corrupt.
* Clear FS_COUNTERS so that we don't unmount with a dirty log, which
* will prevent xfs_repair from fixing anything.
*/
if (fdblocks > sbp->sb_dblocks || ifree > ialloc) {
xfs_alert(mp, "AGF corruption. Please run xfs_repair.");
error = -EFSCORRUPTED;
goto out;
}
/* Overwrite incore superblock counters with just-read data */
spin_lock(&mp->m_sb_lock);
sbp->sb_ifree = ifree;
sbp->sb_icount = ialloc;
sbp->sb_fdblocks = fdblocks;
spin_unlock(&mp->m_sb_lock);
xfs_reinit_percpu_counters(mp);
out:
xfs_fs_mark_healthy(mp, XFS_SICK_FS_COUNTERS);
return error;
}
/*
* xfs_log_sb() can be used to copy arbitrary changes to the in-core superblock
* into the superblock buffer to be logged. It does not provide the higher
* level of locking that is needed to protect the in-core superblock from
* concurrent access.
*/
void
xfs_log_sb(
xfs: remove bitfield based superblock updates When we log changes to the superblock, we first have to write them to the on-disk buffer, and then log that. Right now we have a complex bitfield based arrangement to only write the modified field to the buffer before we log it. This used to be necessary as a performance optimisation because we logged the superblock buffer in every extent or inode allocation or freeing, and so performance was extremely important. We haven't done this for years, however, ever since the lazy superblock counters pulled the superblock logging out of the transaction commit fast path. Hence we have a bunch of complexity that is not necessary that makes writing the in-core superblock to disk much more complex than it needs to be. We only need to log the superblock now during management operations (e.g. during mount, unmount or quota control operations) so it is not a performance critical path anymore. As such, remove the complex field based logging mechanism and replace it with a simple conversion function similar to what we use for all other on-disk structures. This means we always log the entirity of the superblock, but again because we rarely modify the superblock this is not an issue for log bandwidth or CPU time. Indeed, if we do log the superblock frequently, delayed logging will minimise the impact of this overhead. [Fixed gquota/pquota inode sharing regression noticed by bfoster.] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-01-21 22:10:26 +00:00
struct xfs_trans *tp)
{
xfs: remove bitfield based superblock updates When we log changes to the superblock, we first have to write them to the on-disk buffer, and then log that. Right now we have a complex bitfield based arrangement to only write the modified field to the buffer before we log it. This used to be necessary as a performance optimisation because we logged the superblock buffer in every extent or inode allocation or freeing, and so performance was extremely important. We haven't done this for years, however, ever since the lazy superblock counters pulled the superblock logging out of the transaction commit fast path. Hence we have a bunch of complexity that is not necessary that makes writing the in-core superblock to disk much more complex than it needs to be. We only need to log the superblock now during management operations (e.g. during mount, unmount or quota control operations) so it is not a performance critical path anymore. As such, remove the complex field based logging mechanism and replace it with a simple conversion function similar to what we use for all other on-disk structures. This means we always log the entirity of the superblock, but again because we rarely modify the superblock this is not an issue for log bandwidth or CPU time. Indeed, if we do log the superblock frequently, delayed logging will minimise the impact of this overhead. [Fixed gquota/pquota inode sharing regression noticed by bfoster.] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-01-21 22:10:26 +00:00
struct xfs_mount *mp = tp->t_mountp;
struct xfs_buf *bp = xfs_trans_getsb(tp, mp);
mp->m_sb.sb_icount = percpu_counter_sum(&mp->m_icount);
mp->m_sb.sb_ifree = percpu_counter_sum(&mp->m_ifree);
mp->m_sb.sb_fdblocks = percpu_counter_sum(&mp->m_fdblocks);
xfs: remove bitfield based superblock updates When we log changes to the superblock, we first have to write them to the on-disk buffer, and then log that. Right now we have a complex bitfield based arrangement to only write the modified field to the buffer before we log it. This used to be necessary as a performance optimisation because we logged the superblock buffer in every extent or inode allocation or freeing, and so performance was extremely important. We haven't done this for years, however, ever since the lazy superblock counters pulled the superblock logging out of the transaction commit fast path. Hence we have a bunch of complexity that is not necessary that makes writing the in-core superblock to disk much more complex than it needs to be. We only need to log the superblock now during management operations (e.g. during mount, unmount or quota control operations) so it is not a performance critical path anymore. As such, remove the complex field based logging mechanism and replace it with a simple conversion function similar to what we use for all other on-disk structures. This means we always log the entirity of the superblock, but again because we rarely modify the superblock this is not an issue for log bandwidth or CPU time. Indeed, if we do log the superblock frequently, delayed logging will minimise the impact of this overhead. [Fixed gquota/pquota inode sharing regression noticed by bfoster.] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-01-21 22:10:26 +00:00
xfs_sb_to_disk(XFS_BUF_TO_SBP(bp), &mp->m_sb);
xfs_trans_buf_set_type(tp, bp, XFS_BLFT_SB_BUF);
xfs_trans_log_buf(tp, bp, 0, sizeof(struct xfs_dsb) - 1);
}
/*
* xfs_sync_sb
*
* Sync the superblock to disk.
*
* Note that the caller is responsible for checking the frozen state of the
* filesystem. This procedure uses the non-blocking transaction allocator and
* thus will allow modifications to a frozen fs. This is required because this
* code can be called during the process of freezing where use of the high-level
* allocator would deadlock.
*/
int
xfs_sync_sb(
struct xfs_mount *mp,
bool wait)
{
struct xfs_trans *tp;
int error;
error = xfs_trans_alloc(mp, &M_RES(mp)->tr_sb, 0, 0,
XFS_TRANS_NO_WRITECOUNT, &tp);
if (error)
return error;
xfs_log_sb(tp);
if (wait)
xfs_trans_set_sync(tp);
return xfs_trans_commit(tp);
}
/*
* Update all the secondary superblocks to match the new state of the primary.
* Because we are completely overwriting all the existing fields in the
* secondary superblock buffers, there is no need to read them in from disk.
* Just get a new buffer, stamp it and write it.
*
* The sb buffers need to be cached here so that we serialise against other
* operations that access the secondary superblocks, but we don't want to keep
* them in memory once it is written so we mark it as a one-shot buffer.
*/
int
xfs_update_secondary_sbs(
struct xfs_mount *mp)
{
xfs_agnumber_t agno;
int saved_error = 0;
int error = 0;
LIST_HEAD (buffer_list);
/* update secondary superblocks. */
for (agno = 1; agno < mp->m_sb.sb_agcount; agno++) {
struct xfs_buf *bp;
error = xfs_buf_get(mp->m_ddev_targp,
XFS_AG_DADDR(mp, agno, XFS_SB_DADDR),
XFS_FSS_TO_BB(mp, 1), &bp);
/*
* If we get an error reading or writing alternate superblocks,
* continue. xfs_repair chooses the "best" superblock based
* on most matches; if we break early, we'll leave more
* superblocks un-updated than updated, and xfs_repair may
* pick them over the properly-updated primary.
*/
if (error) {
xfs_warn(mp,
"error allocating secondary superblock for ag %d",
agno);
if (!saved_error)
saved_error = error;
continue;
}
bp->b_ops = &xfs_sb_buf_ops;
xfs_buf_oneshot(bp);
xfs_buf_zero(bp, 0, BBTOB(bp->b_length));
xfs_sb_to_disk(XFS_BUF_TO_SBP(bp), &mp->m_sb);
xfs_buf_delwri_queue(bp, &buffer_list);
xfs_buf_relse(bp);
/* don't hold too many buffers at once */
if (agno % 16)
continue;
error = xfs_buf_delwri_submit(&buffer_list);
if (error) {
xfs_warn(mp,
"write error %d updating a secondary superblock near ag %d",
error, agno);
if (!saved_error)
saved_error = error;
continue;
}
}
error = xfs_buf_delwri_submit(&buffer_list);
if (error) {
xfs_warn(mp,
"write error %d updating a secondary superblock near ag %d",
error, agno);
}
return saved_error ? saved_error : error;
}
/*
* Same behavior as xfs_sync_sb, except that it is always synchronous and it
* also writes the superblock buffer to disk sector 0 immediately.
*/
int
xfs_sync_sb_buf(
struct xfs_mount *mp)
{
struct xfs_trans *tp;
struct xfs_buf *bp;
int error;
error = xfs_trans_alloc(mp, &M_RES(mp)->tr_sb, 0, 0, 0, &tp);
if (error)
return error;
bp = xfs_trans_getsb(tp, mp);
xfs_log_sb(tp);
xfs_trans_bhold(tp, bp);
xfs_trans_set_sync(tp);
error = xfs_trans_commit(tp);
if (error)
goto out;
/*
* write out the sb buffer to get the changes to disk
*/
error = xfs_bwrite(bp);
out:
xfs_buf_relse(bp);
return error;
}
void
xfs_fs_geometry(
struct xfs_sb *sbp,
struct xfs_fsop_geom *geo,
int struct_version)
{
memset(geo, 0, sizeof(struct xfs_fsop_geom));
geo->blocksize = sbp->sb_blocksize;
geo->rtextsize = sbp->sb_rextsize;
geo->agblocks = sbp->sb_agblocks;
geo->agcount = sbp->sb_agcount;
geo->logblocks = sbp->sb_logblocks;
geo->sectsize = sbp->sb_sectsize;
geo->inodesize = sbp->sb_inodesize;
geo->imaxpct = sbp->sb_imax_pct;
geo->datablocks = sbp->sb_dblocks;
geo->rtblocks = sbp->sb_rblocks;
geo->rtextents = sbp->sb_rextents;
geo->logstart = sbp->sb_logstart;
BUILD_BUG_ON(sizeof(geo->uuid) != sizeof(sbp->sb_uuid));
memcpy(geo->uuid, &sbp->sb_uuid, sizeof(sbp->sb_uuid));
if (struct_version < 2)
return;
geo->sunit = sbp->sb_unit;
geo->swidth = sbp->sb_width;
if (struct_version < 3)
return;
geo->version = XFS_FSOP_GEOM_VERSION;
geo->flags = XFS_FSOP_GEOM_FLAGS_NLINK |
XFS_FSOP_GEOM_FLAGS_DIRV2 |
XFS_FSOP_GEOM_FLAGS_EXTFLG;
if (xfs_sb_version_hasattr(sbp))
geo->flags |= XFS_FSOP_GEOM_FLAGS_ATTR;
if (xfs_sb_version_hasquota(sbp))
geo->flags |= XFS_FSOP_GEOM_FLAGS_QUOTA;
if (xfs_sb_version_hasalign(sbp))
geo->flags |= XFS_FSOP_GEOM_FLAGS_IALIGN;
if (xfs_sb_version_hasdalign(sbp))
geo->flags |= XFS_FSOP_GEOM_FLAGS_DALIGN;
if (xfs_sb_version_hassector(sbp))
geo->flags |= XFS_FSOP_GEOM_FLAGS_SECTOR;
if (xfs_sb_version_hasasciici(sbp))
geo->flags |= XFS_FSOP_GEOM_FLAGS_DIRV2CI;
if (xfs_sb_version_haslazysbcount(sbp))
geo->flags |= XFS_FSOP_GEOM_FLAGS_LAZYSB;
if (xfs_sb_version_hasattr2(sbp))
geo->flags |= XFS_FSOP_GEOM_FLAGS_ATTR2;
if (xfs_sb_version_hasprojid32bit(sbp))
geo->flags |= XFS_FSOP_GEOM_FLAGS_PROJID32;
if (xfs_sb_version_hascrc(sbp))
geo->flags |= XFS_FSOP_GEOM_FLAGS_V5SB;
if (xfs_sb_version_hasftype(sbp))
geo->flags |= XFS_FSOP_GEOM_FLAGS_FTYPE;
if (xfs_sb_version_hasfinobt(sbp))
geo->flags |= XFS_FSOP_GEOM_FLAGS_FINOBT;
if (xfs_sb_version_hassparseinodes(sbp))
geo->flags |= XFS_FSOP_GEOM_FLAGS_SPINODES;
if (xfs_sb_version_hasrmapbt(sbp))
geo->flags |= XFS_FSOP_GEOM_FLAGS_RMAPBT;
if (xfs_sb_version_hasreflink(sbp))
geo->flags |= XFS_FSOP_GEOM_FLAGS_REFLINK;
if (xfs_sb_version_hassector(sbp))
geo->logsectsize = sbp->sb_logsectsize;
else
geo->logsectsize = BBSIZE;
geo->rtsectsize = sbp->sb_blocksize;
geo->dirblocksize = xfs_dir2_dirblock_bytes(sbp);
if (struct_version < 4)
return;
if (xfs_sb_version_haslogv2(sbp))
geo->flags |= XFS_FSOP_GEOM_FLAGS_LOGV2;
geo->logsunit = sbp->sb_logsunit;
if (struct_version < 5)
return;
geo->version = XFS_FSOP_GEOM_VERSION_V5;
}
/* Read a secondary superblock. */
int
xfs_sb_read_secondary(
struct xfs_mount *mp,
struct xfs_trans *tp,
xfs_agnumber_t agno,
struct xfs_buf **bpp)
{
struct xfs_buf *bp;
int error;
ASSERT(agno != 0 && agno != NULLAGNUMBER);
error = xfs_trans_read_buf(mp, tp, mp->m_ddev_targp,
XFS_AG_DADDR(mp, agno, XFS_SB_BLOCK(mp)),
XFS_FSS_TO_BB(mp, 1), 0, &bp, &xfs_sb_buf_ops);
if (error)
return error;
xfs_buf_set_ref(bp, XFS_SSB_REF);
*bpp = bp;
return 0;
}
/* Get an uninitialised secondary superblock buffer. */
int
xfs_sb_get_secondary(
struct xfs_mount *mp,
struct xfs_trans *tp,
xfs_agnumber_t agno,
struct xfs_buf **bpp)
{
struct xfs_buf *bp;
ASSERT(agno != 0 && agno != NULLAGNUMBER);
bp = xfs_trans_get_buf(tp, mp->m_ddev_targp,
XFS_AG_DADDR(mp, agno, XFS_SB_BLOCK(mp)),
XFS_FSS_TO_BB(mp, 1), 0);
if (!bp)
return -ENOMEM;
bp->b_ops = &xfs_sb_buf_ops;
xfs_buf_oneshot(bp);
*bpp = bp;
return 0;
}