linux-stable/arch/x86/events/core.c

2650 lines
62 KiB
C
Raw Normal View History

/*
perf: Do the big rename: Performance Counters -> Performance Events Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 10:02:48 +00:00
* Performance events x86 architecture code
*
* Copyright (C) 2008 Thomas Gleixner <tglx@linutronix.de>
* Copyright (C) 2008-2009 Red Hat, Inc., Ingo Molnar
* Copyright (C) 2009 Jaswinder Singh Rajput
* Copyright (C) 2009 Advanced Micro Devices, Inc., Robert Richter
* Copyright (C) 2008-2009 Red Hat, Inc., Peter Zijlstra
* Copyright (C) 2009 Intel Corporation, <markus.t.metzger@intel.com>
* Copyright (C) 2009 Google, Inc., Stephane Eranian
*
* For licencing details see kernel-base/COPYING
*/
perf: Do the big rename: Performance Counters -> Performance Events Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 10:02:48 +00:00
#include <linux/perf_event.h>
#include <linux/capability.h>
#include <linux/notifier.h>
#include <linux/hardirq.h>
#include <linux/kprobes.h>
x86: Audit and remove any remaining unnecessary uses of module.h Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. In the case of some of these which are modular, we can extend that to also include files that are building basic support functionality but not related to loading or registering the final module; such files also have no need whatsoever for module.h The advantage in removing such instances is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h was the source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each instance for the presence of either and replace as needed. In the case of crypto/glue_helper.c we delete a redundant instance of MODULE_LICENSE in order to delete module.h -- the license info is already present at the top of the file. The uncore change warrants a mention too; it is uncore.c that uses module.h and not uncore.h; hence the relocation done there. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160714001901.31603-9-paul.gortmaker@windriver.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-14 00:19:01 +00:00
#include <linux/export.h>
#include <linux/init.h>
#include <linux/kdebug.h>
#include <linux/sched/mm.h>
#include <linux/sched/clock.h>
#include <linux/uaccess.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
#include <linux/cpu.h>
#include <linux/bitops.h>
#include <linux/device.h>
#include <linux/nospec.h>
#include <asm/apic.h>
#include <asm/stacktrace.h>
#include <asm/nmi.h>
#include <asm/smp.h>
#include <asm/alternative.h>
#include <asm/mmu_context.h>
#include <asm/tlbflush.h>
#include <asm/timer.h>
#include <asm/desc.h>
#include <asm/ldt.h>
#include <asm/unwind.h>
#include "perf_event.h"
struct x86_pmu x86_pmu __read_mostly;
DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events) = {
.enabled = 1,
};
DEFINE_STATIC_KEY_FALSE(rdpmc_never_available_key);
DEFINE_STATIC_KEY_FALSE(rdpmc_always_available_key);
u64 __read_mostly hw_cache_event_ids
[PERF_COUNT_HW_CACHE_MAX]
[PERF_COUNT_HW_CACHE_OP_MAX]
[PERF_COUNT_HW_CACHE_RESULT_MAX];
u64 __read_mostly hw_cache_extra_regs
[PERF_COUNT_HW_CACHE_MAX]
[PERF_COUNT_HW_CACHE_OP_MAX]
[PERF_COUNT_HW_CACHE_RESULT_MAX];
/*
perf: Do the big rename: Performance Counters -> Performance Events Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 10:02:48 +00:00
* Propagate event elapsed time into the generic event.
* Can only be executed on the CPU where the event is active.
* Returns the delta events processed.
*/
u64 x86_perf_event_update(struct perf_event *event)
{
struct hw_perf_event *hwc = &event->hw;
int shift = 64 - x86_pmu.cntval_bits;
u64 prev_raw_count, new_raw_count;
2016-11-29 20:33:28 +00:00
u64 delta;
if (unlikely(!hwc->event_base))
return 0;
/*
perf: Do the big rename: Performance Counters -> Performance Events Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 10:02:48 +00:00
* Careful: an NMI might modify the previous event value.
*
* Our tactic to handle this is to first atomically read and
* exchange a new raw count - then add that new-prev delta
perf: Do the big rename: Performance Counters -> Performance Events Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 10:02:48 +00:00
* count to the generic event atomically:
*/
again:
prev_raw_count = local64_read(&hwc->prev_count);
rdpmcl(hwc->event_base_rdpmc, new_raw_count);
if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
new_raw_count) != prev_raw_count)
goto again;
/*
* Now we have the new raw value and have updated the prev
* timestamp already. We can now calculate the elapsed delta
perf: Do the big rename: Performance Counters -> Performance Events Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 10:02:48 +00:00
* (event-)time and add that to the generic event.
*
* Careful, not all hw sign-extends above the physical width
* of the count.
*/
delta = (new_raw_count << shift) - (prev_raw_count << shift);
delta >>= shift;
local64_add(delta, &event->count);
local64_sub(delta, &hwc->period_left);
return new_raw_count;
}
perf: Add support for supplementary event registers Change logs against Andi's original version: - Extends perf_event_attr:config to config{,1,2} (Peter Zijlstra) - Fixed a major event scheduling issue. There cannot be a ref++ on an event that has already done ref++ once and without calling put_constraint() in between. (Stephane Eranian) - Use thread_cpumask for percore allocation. (Lin Ming) - Use MSR names in the extra reg lists. (Lin Ming) - Remove redundant "c = NULL" in intel_percore_constraints - Fix comment of perf_event_attr::config1 Intel Nehalem/Westmere have a special OFFCORE_RESPONSE event that can be used to monitor any offcore accesses from a core. This is a very useful event for various tunings, and it's also needed to implement the generic LLC-* events correctly. Unfortunately this event requires programming a mask in a separate register. And worse this separate register is per core, not per CPU thread. This patch: - Teaches perf_events that OFFCORE_RESPONSE needs extra parameters. The extra parameters are passed by user space in the perf_event_attr::config1 field. - Adds support to the Intel perf_event core to schedule per core resources. This adds fairly generic infrastructure that can be also used for other per core resources. The basic code has is patterned after the similar AMD northbridge constraints code. Thanks to Stephane Eranian who pointed out some problems in the original version and suggested improvements. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1299119690-13991-2-git-send-email-ming.m.lin@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-03 02:34:47 +00:00
/*
* Find and validate any extra registers to set up.
*/
static int x86_pmu_extra_regs(u64 config, struct perf_event *event)
{
struct hw_perf_event_extra *reg;
perf: Add support for supplementary event registers Change logs against Andi's original version: - Extends perf_event_attr:config to config{,1,2} (Peter Zijlstra) - Fixed a major event scheduling issue. There cannot be a ref++ on an event that has already done ref++ once and without calling put_constraint() in between. (Stephane Eranian) - Use thread_cpumask for percore allocation. (Lin Ming) - Use MSR names in the extra reg lists. (Lin Ming) - Remove redundant "c = NULL" in intel_percore_constraints - Fix comment of perf_event_attr::config1 Intel Nehalem/Westmere have a special OFFCORE_RESPONSE event that can be used to monitor any offcore accesses from a core. This is a very useful event for various tunings, and it's also needed to implement the generic LLC-* events correctly. Unfortunately this event requires programming a mask in a separate register. And worse this separate register is per core, not per CPU thread. This patch: - Teaches perf_events that OFFCORE_RESPONSE needs extra parameters. The extra parameters are passed by user space in the perf_event_attr::config1 field. - Adds support to the Intel perf_event core to schedule per core resources. This adds fairly generic infrastructure that can be also used for other per core resources. The basic code has is patterned after the similar AMD northbridge constraints code. Thanks to Stephane Eranian who pointed out some problems in the original version and suggested improvements. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1299119690-13991-2-git-send-email-ming.m.lin@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-03 02:34:47 +00:00
struct extra_reg *er;
reg = &event->hw.extra_reg;
perf: Add support for supplementary event registers Change logs against Andi's original version: - Extends perf_event_attr:config to config{,1,2} (Peter Zijlstra) - Fixed a major event scheduling issue. There cannot be a ref++ on an event that has already done ref++ once and without calling put_constraint() in between. (Stephane Eranian) - Use thread_cpumask for percore allocation. (Lin Ming) - Use MSR names in the extra reg lists. (Lin Ming) - Remove redundant "c = NULL" in intel_percore_constraints - Fix comment of perf_event_attr::config1 Intel Nehalem/Westmere have a special OFFCORE_RESPONSE event that can be used to monitor any offcore accesses from a core. This is a very useful event for various tunings, and it's also needed to implement the generic LLC-* events correctly. Unfortunately this event requires programming a mask in a separate register. And worse this separate register is per core, not per CPU thread. This patch: - Teaches perf_events that OFFCORE_RESPONSE needs extra parameters. The extra parameters are passed by user space in the perf_event_attr::config1 field. - Adds support to the Intel perf_event core to schedule per core resources. This adds fairly generic infrastructure that can be also used for other per core resources. The basic code has is patterned after the similar AMD northbridge constraints code. Thanks to Stephane Eranian who pointed out some problems in the original version and suggested improvements. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1299119690-13991-2-git-send-email-ming.m.lin@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-03 02:34:47 +00:00
if (!x86_pmu.extra_regs)
return 0;
for (er = x86_pmu.extra_regs; er->msr; er++) {
if (er->event != (config & er->config_mask))
continue;
if (event->attr.config1 & ~er->valid_mask)
return -EINVAL;
/* Check if the extra msrs can be safely accessed*/
if (!er->extra_msr_access)
return -ENXIO;
reg->idx = er->idx;
reg->config = event->attr.config1;
reg->reg = er->msr;
perf: Add support for supplementary event registers Change logs against Andi's original version: - Extends perf_event_attr:config to config{,1,2} (Peter Zijlstra) - Fixed a major event scheduling issue. There cannot be a ref++ on an event that has already done ref++ once and without calling put_constraint() in between. (Stephane Eranian) - Use thread_cpumask for percore allocation. (Lin Ming) - Use MSR names in the extra reg lists. (Lin Ming) - Remove redundant "c = NULL" in intel_percore_constraints - Fix comment of perf_event_attr::config1 Intel Nehalem/Westmere have a special OFFCORE_RESPONSE event that can be used to monitor any offcore accesses from a core. This is a very useful event for various tunings, and it's also needed to implement the generic LLC-* events correctly. Unfortunately this event requires programming a mask in a separate register. And worse this separate register is per core, not per CPU thread. This patch: - Teaches perf_events that OFFCORE_RESPONSE needs extra parameters. The extra parameters are passed by user space in the perf_event_attr::config1 field. - Adds support to the Intel perf_event core to schedule per core resources. This adds fairly generic infrastructure that can be also used for other per core resources. The basic code has is patterned after the similar AMD northbridge constraints code. Thanks to Stephane Eranian who pointed out some problems in the original version and suggested improvements. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1299119690-13991-2-git-send-email-ming.m.lin@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-03 02:34:47 +00:00
break;
}
return 0;
}
perf: Do the big rename: Performance Counters -> Performance Events Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 10:02:48 +00:00
static atomic_t active_events;
perf/x86/intel: Fix PMI handling for Intel PT Intel PT is a separate PMU and it is not using any of the x86_pmu code paths, which means in particular that the active_events counter remains intact when new PT events are created. However, PT uses the generic x86_pmu PMI handler for its PMI handling needs. The problem here is that the latter checks active_events and in case of it being zero, exits without calling the actual x86_pmu.handle_nmi(), which results in unknown NMI errors and massive data loss for PT. The effect is not visible if there are other perf events in the system at the same time that keep active_events counter non-zero, for instance if the NMI watchdog is running, so one needs to disable it to reproduce the problem. At the same time, the active_events counter besides doing what the name suggests also implicitly serves as a PMC hardware and DS area reference counter. This patch adds a separate reference counter for the PMC hardware, leaving active_events for actually counting the events and makes sure it also counts PT and BTS events. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Link: http://lkml.kernel.org/r/87k2v92t0s.fsf@ashishki-desk.ger.corp.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-09 10:03:26 +00:00
static atomic_t pmc_refcount;
static DEFINE_MUTEX(pmc_reserve_mutex);
#ifdef CONFIG_X86_LOCAL_APIC
static bool reserve_pmc_hardware(void)
{
int i;
for (i = 0; i < x86_pmu.num_counters; i++) {
if (!reserve_perfctr_nmi(x86_pmu_event_addr(i)))
goto perfctr_fail;
}
for (i = 0; i < x86_pmu.num_counters; i++) {
if (!reserve_evntsel_nmi(x86_pmu_config_addr(i)))
goto eventsel_fail;
}
return true;
eventsel_fail:
for (i--; i >= 0; i--)
release_evntsel_nmi(x86_pmu_config_addr(i));
i = x86_pmu.num_counters;
perfctr_fail:
for (i--; i >= 0; i--)
release_perfctr_nmi(x86_pmu_event_addr(i));
return false;
}
static void release_pmc_hardware(void)
{
int i;
for (i = 0; i < x86_pmu.num_counters; i++) {
release_perfctr_nmi(x86_pmu_event_addr(i));
release_evntsel_nmi(x86_pmu_config_addr(i));
}
}
#else
static bool reserve_pmc_hardware(void) { return true; }
static void release_pmc_hardware(void) {}
#endif
static bool check_hw_exists(void)
{
u64 val, val_fail = -1, val_new= ~0;
int i, reg, reg_fail = -1, ret = 0;
perf/x86: Check all MSRs before passing hw check check_hw_exists() has a number of checks which go to two exit paths: msr_fail and bios_fail. Checks classified as msr_fail will cause check_hw_exists() to return false, causing the PMU not to be used; bios_fail checks will only cause a warning to be printed, but will return true. The problem is that if there are both msr failures and bios failures, and the routine hits a bios_fail check first, it will exit early and return true, not finishing the rest of the msr checks. If those msrs are in fact broken, it will cause them to be used erroneously. In the case of a Xen PV VM, the guest OS has read access to all the MSRs, but write access is white-listed to supported features. Writes to unsupported MSRs have no effect. The PMU MSRs are not (typically) supported, because they are expensive to save and restore on a VM context switch. One of the "msr_fail" checks is supposed to detect this circumstance (ether for Xen or KVM) and disable the harware PMU. However, on one of my AMD boxen, there is (apparently) a broken BIOS which triggers one of the bios_fail checks. In particular, MSR_K7_EVNTSEL0 has the ARCH_PERFMON_EVENTSEL_ENABLE bit set. The guest kernel detects this because it has read access to all MSRs, and causes it to skip the rest of the checks and try to use the non-existent hardware PMU. This minimally causes a lot of useless instruction emulation and Xen console spam; it may cause other issues with the watchdog as well. This changset causes check_hw_exists() to go through all of the msr checks, failing and returning false if any of them fail. This makes sure that a guest running under Xen without a virtual PMU will detect that there is no functioning PMU and not attempt to use it. This problem affects kernels as far back as 3.2, and should thus be considered for backport. Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com> Cc: Konrad Wilk <konrad.wilk@oracle.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Link: http://lkml.kernel.org/r/1365000388-32448-1-git-send-email-george.dunlap@eu.citrix.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-03 14:46:28 +00:00
int bios_fail = 0;
perf/x86: Tweak broken BIOS rules during check_hw_exists() I stumbled upon an AMD box that had the BIOS using a hardware performance counter. Instead of printing out a warning and continuing, it failed and blocked further perf counter usage. Looking through the history, I found this commit: a5ebe0ba3dff ("perf/x86: Check all MSRs before passing hw check") which tweaked the rules for a Xen guest on an almost identical box and now changed the behaviour. Unfortunately the rules were tweaked incorrectly and will always lead to MSR failures even though the MSRs are completely fine. What happens now is in arch/x86/kernel/cpu/perf_event.c::check_hw_exists(): <snip> for (i = 0; i < x86_pmu.num_counters; i++) { reg = x86_pmu_config_addr(i); ret = rdmsrl_safe(reg, &val); if (ret) goto msr_fail; if (val & ARCH_PERFMON_EVENTSEL_ENABLE) { bios_fail = 1; val_fail = val; reg_fail = reg; } } <snip> /* * Read the current value, change it and read it back to see if it * matches, this is needed to detect certain hardware emulators * (qemu/kvm) that don't trap on the MSR access and always return 0s. */ reg = x86_pmu_event_addr(0); ^^^^ if the first perf counter is enabled, then this routine will always fail because the counter is running. :-( if (rdmsrl_safe(reg, &val)) goto msr_fail; val ^= 0xffffUL; ret = wrmsrl_safe(reg, val); ret |= rdmsrl_safe(reg, &val_new); if (ret || val != val_new) goto msr_fail; The above bios_fail used to be a 'goto' which is why it worked in the past. Further, most vendors have migrated to using fixed counters to hide their evilness hence this problem rarely shows up now days except on a few old boxes. I fixed my problem and kept the spirit of the original Xen fix, by recording a safe non-enable register to be used safely for the reading/writing check. Because it is not enabled, this passes on bare metal boxes (like metal), but should continue to throw an msr_fail on Xen guests because the register isn't emulated yet. Now I get a proper bios_fail error message and Xen should still see their msr_fail message (untested). Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: george.dunlap@eu.citrix.com Cc: konrad.wilk@oracle.com Link: http://lkml.kernel.org/r/1431976608-56970-1-git-send-email-dzickus@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-18 19:16:48 +00:00
int reg_safe = -1;
/*
* Check to see if the BIOS enabled any of the counters, if so
* complain and bail.
*/
for (i = 0; i < x86_pmu.num_counters; i++) {
reg = x86_pmu_config_addr(i);
ret = rdmsrl_safe(reg, &val);
if (ret)
goto msr_fail;
perf/x86: Check all MSRs before passing hw check check_hw_exists() has a number of checks which go to two exit paths: msr_fail and bios_fail. Checks classified as msr_fail will cause check_hw_exists() to return false, causing the PMU not to be used; bios_fail checks will only cause a warning to be printed, but will return true. The problem is that if there are both msr failures and bios failures, and the routine hits a bios_fail check first, it will exit early and return true, not finishing the rest of the msr checks. If those msrs are in fact broken, it will cause them to be used erroneously. In the case of a Xen PV VM, the guest OS has read access to all the MSRs, but write access is white-listed to supported features. Writes to unsupported MSRs have no effect. The PMU MSRs are not (typically) supported, because they are expensive to save and restore on a VM context switch. One of the "msr_fail" checks is supposed to detect this circumstance (ether for Xen or KVM) and disable the harware PMU. However, on one of my AMD boxen, there is (apparently) a broken BIOS which triggers one of the bios_fail checks. In particular, MSR_K7_EVNTSEL0 has the ARCH_PERFMON_EVENTSEL_ENABLE bit set. The guest kernel detects this because it has read access to all MSRs, and causes it to skip the rest of the checks and try to use the non-existent hardware PMU. This minimally causes a lot of useless instruction emulation and Xen console spam; it may cause other issues with the watchdog as well. This changset causes check_hw_exists() to go through all of the msr checks, failing and returning false if any of them fail. This makes sure that a guest running under Xen without a virtual PMU will detect that there is no functioning PMU and not attempt to use it. This problem affects kernels as far back as 3.2, and should thus be considered for backport. Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com> Cc: Konrad Wilk <konrad.wilk@oracle.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Link: http://lkml.kernel.org/r/1365000388-32448-1-git-send-email-george.dunlap@eu.citrix.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-03 14:46:28 +00:00
if (val & ARCH_PERFMON_EVENTSEL_ENABLE) {
bios_fail = 1;
val_fail = val;
reg_fail = reg;
perf/x86: Tweak broken BIOS rules during check_hw_exists() I stumbled upon an AMD box that had the BIOS using a hardware performance counter. Instead of printing out a warning and continuing, it failed and blocked further perf counter usage. Looking through the history, I found this commit: a5ebe0ba3dff ("perf/x86: Check all MSRs before passing hw check") which tweaked the rules for a Xen guest on an almost identical box and now changed the behaviour. Unfortunately the rules were tweaked incorrectly and will always lead to MSR failures even though the MSRs are completely fine. What happens now is in arch/x86/kernel/cpu/perf_event.c::check_hw_exists(): <snip> for (i = 0; i < x86_pmu.num_counters; i++) { reg = x86_pmu_config_addr(i); ret = rdmsrl_safe(reg, &val); if (ret) goto msr_fail; if (val & ARCH_PERFMON_EVENTSEL_ENABLE) { bios_fail = 1; val_fail = val; reg_fail = reg; } } <snip> /* * Read the current value, change it and read it back to see if it * matches, this is needed to detect certain hardware emulators * (qemu/kvm) that don't trap on the MSR access and always return 0s. */ reg = x86_pmu_event_addr(0); ^^^^ if the first perf counter is enabled, then this routine will always fail because the counter is running. :-( if (rdmsrl_safe(reg, &val)) goto msr_fail; val ^= 0xffffUL; ret = wrmsrl_safe(reg, val); ret |= rdmsrl_safe(reg, &val_new); if (ret || val != val_new) goto msr_fail; The above bios_fail used to be a 'goto' which is why it worked in the past. Further, most vendors have migrated to using fixed counters to hide their evilness hence this problem rarely shows up now days except on a few old boxes. I fixed my problem and kept the spirit of the original Xen fix, by recording a safe non-enable register to be used safely for the reading/writing check. Because it is not enabled, this passes on bare metal boxes (like metal), but should continue to throw an msr_fail on Xen guests because the register isn't emulated yet. Now I get a proper bios_fail error message and Xen should still see their msr_fail message (untested). Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: george.dunlap@eu.citrix.com Cc: konrad.wilk@oracle.com Link: http://lkml.kernel.org/r/1431976608-56970-1-git-send-email-dzickus@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-18 19:16:48 +00:00
} else {
reg_safe = i;
perf/x86: Check all MSRs before passing hw check check_hw_exists() has a number of checks which go to two exit paths: msr_fail and bios_fail. Checks classified as msr_fail will cause check_hw_exists() to return false, causing the PMU not to be used; bios_fail checks will only cause a warning to be printed, but will return true. The problem is that if there are both msr failures and bios failures, and the routine hits a bios_fail check first, it will exit early and return true, not finishing the rest of the msr checks. If those msrs are in fact broken, it will cause them to be used erroneously. In the case of a Xen PV VM, the guest OS has read access to all the MSRs, but write access is white-listed to supported features. Writes to unsupported MSRs have no effect. The PMU MSRs are not (typically) supported, because they are expensive to save and restore on a VM context switch. One of the "msr_fail" checks is supposed to detect this circumstance (ether for Xen or KVM) and disable the harware PMU. However, on one of my AMD boxen, there is (apparently) a broken BIOS which triggers one of the bios_fail checks. In particular, MSR_K7_EVNTSEL0 has the ARCH_PERFMON_EVENTSEL_ENABLE bit set. The guest kernel detects this because it has read access to all MSRs, and causes it to skip the rest of the checks and try to use the non-existent hardware PMU. This minimally causes a lot of useless instruction emulation and Xen console spam; it may cause other issues with the watchdog as well. This changset causes check_hw_exists() to go through all of the msr checks, failing and returning false if any of them fail. This makes sure that a guest running under Xen without a virtual PMU will detect that there is no functioning PMU and not attempt to use it. This problem affects kernels as far back as 3.2, and should thus be considered for backport. Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com> Cc: Konrad Wilk <konrad.wilk@oracle.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Link: http://lkml.kernel.org/r/1365000388-32448-1-git-send-email-george.dunlap@eu.citrix.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-03 14:46:28 +00:00
}
}
if (x86_pmu.num_counters_fixed) {
reg = MSR_ARCH_PERFMON_FIXED_CTR_CTRL;
ret = rdmsrl_safe(reg, &val);
if (ret)
goto msr_fail;
for (i = 0; i < x86_pmu.num_counters_fixed; i++) {
perf/x86: Check all MSRs before passing hw check check_hw_exists() has a number of checks which go to two exit paths: msr_fail and bios_fail. Checks classified as msr_fail will cause check_hw_exists() to return false, causing the PMU not to be used; bios_fail checks will only cause a warning to be printed, but will return true. The problem is that if there are both msr failures and bios failures, and the routine hits a bios_fail check first, it will exit early and return true, not finishing the rest of the msr checks. If those msrs are in fact broken, it will cause them to be used erroneously. In the case of a Xen PV VM, the guest OS has read access to all the MSRs, but write access is white-listed to supported features. Writes to unsupported MSRs have no effect. The PMU MSRs are not (typically) supported, because they are expensive to save and restore on a VM context switch. One of the "msr_fail" checks is supposed to detect this circumstance (ether for Xen or KVM) and disable the harware PMU. However, on one of my AMD boxen, there is (apparently) a broken BIOS which triggers one of the bios_fail checks. In particular, MSR_K7_EVNTSEL0 has the ARCH_PERFMON_EVENTSEL_ENABLE bit set. The guest kernel detects this because it has read access to all MSRs, and causes it to skip the rest of the checks and try to use the non-existent hardware PMU. This minimally causes a lot of useless instruction emulation and Xen console spam; it may cause other issues with the watchdog as well. This changset causes check_hw_exists() to go through all of the msr checks, failing and returning false if any of them fail. This makes sure that a guest running under Xen without a virtual PMU will detect that there is no functioning PMU and not attempt to use it. This problem affects kernels as far back as 3.2, and should thus be considered for backport. Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com> Cc: Konrad Wilk <konrad.wilk@oracle.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Link: http://lkml.kernel.org/r/1365000388-32448-1-git-send-email-george.dunlap@eu.citrix.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-03 14:46:28 +00:00
if (val & (0x03 << i*4)) {
bios_fail = 1;
val_fail = val;
reg_fail = reg;
}
}
}
perf/x86: Tweak broken BIOS rules during check_hw_exists() I stumbled upon an AMD box that had the BIOS using a hardware performance counter. Instead of printing out a warning and continuing, it failed and blocked further perf counter usage. Looking through the history, I found this commit: a5ebe0ba3dff ("perf/x86: Check all MSRs before passing hw check") which tweaked the rules for a Xen guest on an almost identical box and now changed the behaviour. Unfortunately the rules were tweaked incorrectly and will always lead to MSR failures even though the MSRs are completely fine. What happens now is in arch/x86/kernel/cpu/perf_event.c::check_hw_exists(): <snip> for (i = 0; i < x86_pmu.num_counters; i++) { reg = x86_pmu_config_addr(i); ret = rdmsrl_safe(reg, &val); if (ret) goto msr_fail; if (val & ARCH_PERFMON_EVENTSEL_ENABLE) { bios_fail = 1; val_fail = val; reg_fail = reg; } } <snip> /* * Read the current value, change it and read it back to see if it * matches, this is needed to detect certain hardware emulators * (qemu/kvm) that don't trap on the MSR access and always return 0s. */ reg = x86_pmu_event_addr(0); ^^^^ if the first perf counter is enabled, then this routine will always fail because the counter is running. :-( if (rdmsrl_safe(reg, &val)) goto msr_fail; val ^= 0xffffUL; ret = wrmsrl_safe(reg, val); ret |= rdmsrl_safe(reg, &val_new); if (ret || val != val_new) goto msr_fail; The above bios_fail used to be a 'goto' which is why it worked in the past. Further, most vendors have migrated to using fixed counters to hide their evilness hence this problem rarely shows up now days except on a few old boxes. I fixed my problem and kept the spirit of the original Xen fix, by recording a safe non-enable register to be used safely for the reading/writing check. Because it is not enabled, this passes on bare metal boxes (like metal), but should continue to throw an msr_fail on Xen guests because the register isn't emulated yet. Now I get a proper bios_fail error message and Xen should still see their msr_fail message (untested). Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: george.dunlap@eu.citrix.com Cc: konrad.wilk@oracle.com Link: http://lkml.kernel.org/r/1431976608-56970-1-git-send-email-dzickus@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-18 19:16:48 +00:00
/*
* If all the counters are enabled, the below test will always
* fail. The tools will also become useless in this scenario.
* Just fail and disable the hardware counters.
*/
if (reg_safe == -1) {
reg = reg_safe;
goto msr_fail;
}
/*
x86/perf: Fix virtualization sanity check In check_hw_exists() we try to detect non-emulated MSR accesses by writing an arbitrary value into one of the PMU registers and check if it's value after a readout is still the same. This algorithm silently assumes that the register does not contain the magic value already, which is wrong in at least one situation. Fix the algorithm to really do a read-modify-write cycle. This fixes a warning under Xen under some circumstances on AMD family 10h CPUs. The reasons in more details actually sound like a story from Believe It or Not!: First you need an AMD family 10h/12h CPU. These do not reset the PERF_CTR registers on a reboot. Now you boot bare metal Linux, which goes successfully through this check, but leaves the magic value of 0xabcd in the register. You don't use the performance counters, but do a reboot (warm reset). Then you choose to boot Xen. The check will be triggered with a recent Linux kernel as Dom0 again, trying to write 0xabcd into the MSR. Xen silently drops the write (expected), but the subsequent read will return the value in the register, which just happens to be the expected magic value. Thus the test misleadingly succeeds, leaving the kernel in the belief that the PMU is available. This will trigger the following message: [ 0.020294] ------------[ cut here ]------------ [ 0.020311] WARNING: at arch/x86/xen/enlighten.c:730 xen_apic_write+0x15/0x17() [ 0.020318] Hardware name: empty [ 0.020323] Modules linked in: [ 0.020334] Pid: 1, comm: swapper/0 Not tainted 3.3.8 #7 [ 0.020340] Call Trace: [ 0.020354] [<ffffffff81050379>] warn_slowpath_common+0x80/0x98 [ 0.020369] [<ffffffff810503a6>] warn_slowpath_null+0x15/0x17 [ 0.020378] [<ffffffff810034df>] xen_apic_write+0x15/0x17 [ 0.020392] [<ffffffff8101cb2b>] perf_events_lapic_init+0x2e/0x30 [ 0.020410] [<ffffffff81ee4dd0>] init_hw_perf_events+0x250/0x407 [ 0.020419] [<ffffffff81ee4b80>] ? check_bugs+0x2d/0x2d [ 0.020430] [<ffffffff81002181>] do_one_initcall+0x7a/0x131 [ 0.020444] [<ffffffff81edbbf9>] kernel_init+0x91/0x15d [ 0.020456] [<ffffffff817caaa4>] kernel_thread_helper+0x4/0x10 [ 0.020471] [<ffffffff817c347c>] ? retint_restore_args+0x5/0x6 [ 0.020481] [<ffffffff817caaa0>] ? gs_change+0x13/0x13 [ 0.020500] ---[ end trace a7919e7f17c0a725 ]--- The new code will change every of the 16 low bits read from the register and tries to write and read-back that modified number from the MSR. Signed-off-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Avi Kivity <avi@redhat.com> Link: http://lkml.kernel.org/r/1349797115-28346-2-git-send-email-andre.przywara@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-09 15:38:35 +00:00
* Read the current value, change it and read it back to see if it
* matches, this is needed to detect certain hardware emulators
* (qemu/kvm) that don't trap on the MSR access and always return 0s.
*/
perf/x86: Tweak broken BIOS rules during check_hw_exists() I stumbled upon an AMD box that had the BIOS using a hardware performance counter. Instead of printing out a warning and continuing, it failed and blocked further perf counter usage. Looking through the history, I found this commit: a5ebe0ba3dff ("perf/x86: Check all MSRs before passing hw check") which tweaked the rules for a Xen guest on an almost identical box and now changed the behaviour. Unfortunately the rules were tweaked incorrectly and will always lead to MSR failures even though the MSRs are completely fine. What happens now is in arch/x86/kernel/cpu/perf_event.c::check_hw_exists(): <snip> for (i = 0; i < x86_pmu.num_counters; i++) { reg = x86_pmu_config_addr(i); ret = rdmsrl_safe(reg, &val); if (ret) goto msr_fail; if (val & ARCH_PERFMON_EVENTSEL_ENABLE) { bios_fail = 1; val_fail = val; reg_fail = reg; } } <snip> /* * Read the current value, change it and read it back to see if it * matches, this is needed to detect certain hardware emulators * (qemu/kvm) that don't trap on the MSR access and always return 0s. */ reg = x86_pmu_event_addr(0); ^^^^ if the first perf counter is enabled, then this routine will always fail because the counter is running. :-( if (rdmsrl_safe(reg, &val)) goto msr_fail; val ^= 0xffffUL; ret = wrmsrl_safe(reg, val); ret |= rdmsrl_safe(reg, &val_new); if (ret || val != val_new) goto msr_fail; The above bios_fail used to be a 'goto' which is why it worked in the past. Further, most vendors have migrated to using fixed counters to hide their evilness hence this problem rarely shows up now days except on a few old boxes. I fixed my problem and kept the spirit of the original Xen fix, by recording a safe non-enable register to be used safely for the reading/writing check. Because it is not enabled, this passes on bare metal boxes (like metal), but should continue to throw an msr_fail on Xen guests because the register isn't emulated yet. Now I get a proper bios_fail error message and Xen should still see their msr_fail message (untested). Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: george.dunlap@eu.citrix.com Cc: konrad.wilk@oracle.com Link: http://lkml.kernel.org/r/1431976608-56970-1-git-send-email-dzickus@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-18 19:16:48 +00:00
reg = x86_pmu_event_addr(reg_safe);
x86/perf: Fix virtualization sanity check In check_hw_exists() we try to detect non-emulated MSR accesses by writing an arbitrary value into one of the PMU registers and check if it's value after a readout is still the same. This algorithm silently assumes that the register does not contain the magic value already, which is wrong in at least one situation. Fix the algorithm to really do a read-modify-write cycle. This fixes a warning under Xen under some circumstances on AMD family 10h CPUs. The reasons in more details actually sound like a story from Believe It or Not!: First you need an AMD family 10h/12h CPU. These do not reset the PERF_CTR registers on a reboot. Now you boot bare metal Linux, which goes successfully through this check, but leaves the magic value of 0xabcd in the register. You don't use the performance counters, but do a reboot (warm reset). Then you choose to boot Xen. The check will be triggered with a recent Linux kernel as Dom0 again, trying to write 0xabcd into the MSR. Xen silently drops the write (expected), but the subsequent read will return the value in the register, which just happens to be the expected magic value. Thus the test misleadingly succeeds, leaving the kernel in the belief that the PMU is available. This will trigger the following message: [ 0.020294] ------------[ cut here ]------------ [ 0.020311] WARNING: at arch/x86/xen/enlighten.c:730 xen_apic_write+0x15/0x17() [ 0.020318] Hardware name: empty [ 0.020323] Modules linked in: [ 0.020334] Pid: 1, comm: swapper/0 Not tainted 3.3.8 #7 [ 0.020340] Call Trace: [ 0.020354] [<ffffffff81050379>] warn_slowpath_common+0x80/0x98 [ 0.020369] [<ffffffff810503a6>] warn_slowpath_null+0x15/0x17 [ 0.020378] [<ffffffff810034df>] xen_apic_write+0x15/0x17 [ 0.020392] [<ffffffff8101cb2b>] perf_events_lapic_init+0x2e/0x30 [ 0.020410] [<ffffffff81ee4dd0>] init_hw_perf_events+0x250/0x407 [ 0.020419] [<ffffffff81ee4b80>] ? check_bugs+0x2d/0x2d [ 0.020430] [<ffffffff81002181>] do_one_initcall+0x7a/0x131 [ 0.020444] [<ffffffff81edbbf9>] kernel_init+0x91/0x15d [ 0.020456] [<ffffffff817caaa4>] kernel_thread_helper+0x4/0x10 [ 0.020471] [<ffffffff817c347c>] ? retint_restore_args+0x5/0x6 [ 0.020481] [<ffffffff817caaa0>] ? gs_change+0x13/0x13 [ 0.020500] ---[ end trace a7919e7f17c0a725 ]--- The new code will change every of the 16 low bits read from the register and tries to write and read-back that modified number from the MSR. Signed-off-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Avi Kivity <avi@redhat.com> Link: http://lkml.kernel.org/r/1349797115-28346-2-git-send-email-andre.przywara@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-09 15:38:35 +00:00
if (rdmsrl_safe(reg, &val))
goto msr_fail;
val ^= 0xffffUL;
ret = wrmsrl_safe(reg, val);
ret |= rdmsrl_safe(reg, &val_new);
if (ret || val != val_new)
goto msr_fail;
/*
* We still allow the PMU driver to operate:
*/
perf/x86: Check all MSRs before passing hw check check_hw_exists() has a number of checks which go to two exit paths: msr_fail and bios_fail. Checks classified as msr_fail will cause check_hw_exists() to return false, causing the PMU not to be used; bios_fail checks will only cause a warning to be printed, but will return true. The problem is that if there are both msr failures and bios failures, and the routine hits a bios_fail check first, it will exit early and return true, not finishing the rest of the msr checks. If those msrs are in fact broken, it will cause them to be used erroneously. In the case of a Xen PV VM, the guest OS has read access to all the MSRs, but write access is white-listed to supported features. Writes to unsupported MSRs have no effect. The PMU MSRs are not (typically) supported, because they are expensive to save and restore on a VM context switch. One of the "msr_fail" checks is supposed to detect this circumstance (ether for Xen or KVM) and disable the harware PMU. However, on one of my AMD boxen, there is (apparently) a broken BIOS which triggers one of the bios_fail checks. In particular, MSR_K7_EVNTSEL0 has the ARCH_PERFMON_EVENTSEL_ENABLE bit set. The guest kernel detects this because it has read access to all MSRs, and causes it to skip the rest of the checks and try to use the non-existent hardware PMU. This minimally causes a lot of useless instruction emulation and Xen console spam; it may cause other issues with the watchdog as well. This changset causes check_hw_exists() to go through all of the msr checks, failing and returning false if any of them fail. This makes sure that a guest running under Xen without a virtual PMU will detect that there is no functioning PMU and not attempt to use it. This problem affects kernels as far back as 3.2, and should thus be considered for backport. Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com> Cc: Konrad Wilk <konrad.wilk@oracle.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Link: http://lkml.kernel.org/r/1365000388-32448-1-git-send-email-george.dunlap@eu.citrix.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-03 14:46:28 +00:00
if (bios_fail) {
pr_cont("Broken BIOS detected, complain to your hardware vendor.\n");
pr_err(FW_BUG "the BIOS has corrupted hw-PMU resources (MSR %x is %Lx)\n",
reg_fail, val_fail);
perf/x86: Check all MSRs before passing hw check check_hw_exists() has a number of checks which go to two exit paths: msr_fail and bios_fail. Checks classified as msr_fail will cause check_hw_exists() to return false, causing the PMU not to be used; bios_fail checks will only cause a warning to be printed, but will return true. The problem is that if there are both msr failures and bios failures, and the routine hits a bios_fail check first, it will exit early and return true, not finishing the rest of the msr checks. If those msrs are in fact broken, it will cause them to be used erroneously. In the case of a Xen PV VM, the guest OS has read access to all the MSRs, but write access is white-listed to supported features. Writes to unsupported MSRs have no effect. The PMU MSRs are not (typically) supported, because they are expensive to save and restore on a VM context switch. One of the "msr_fail" checks is supposed to detect this circumstance (ether for Xen or KVM) and disable the harware PMU. However, on one of my AMD boxen, there is (apparently) a broken BIOS which triggers one of the bios_fail checks. In particular, MSR_K7_EVNTSEL0 has the ARCH_PERFMON_EVENTSEL_ENABLE bit set. The guest kernel detects this because it has read access to all MSRs, and causes it to skip the rest of the checks and try to use the non-existent hardware PMU. This minimally causes a lot of useless instruction emulation and Xen console spam; it may cause other issues with the watchdog as well. This changset causes check_hw_exists() to go through all of the msr checks, failing and returning false if any of them fail. This makes sure that a guest running under Xen without a virtual PMU will detect that there is no functioning PMU and not attempt to use it. This problem affects kernels as far back as 3.2, and should thus be considered for backport. Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com> Cc: Konrad Wilk <konrad.wilk@oracle.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Link: http://lkml.kernel.org/r/1365000388-32448-1-git-send-email-george.dunlap@eu.citrix.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-03 14:46:28 +00:00
}
return true;
msr_fail:
if (boot_cpu_has(X86_FEATURE_HYPERVISOR)) {
pr_cont("PMU not available due to virtualization, using software events only.\n");
} else {
pr_cont("Broken PMU hardware detected, using software events only.\n");
pr_err("Failed to access perfctr msr (MSR %x is %Lx)\n",
reg, val_new);
}
return false;
}
perf: Do the big rename: Performance Counters -> Performance Events Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 10:02:48 +00:00
static void hw_perf_event_destroy(struct perf_event *event)
{
x86_release_hardware();
perf/x86/intel: Fix PMI handling for Intel PT Intel PT is a separate PMU and it is not using any of the x86_pmu code paths, which means in particular that the active_events counter remains intact when new PT events are created. However, PT uses the generic x86_pmu PMI handler for its PMI handling needs. The problem here is that the latter checks active_events and in case of it being zero, exits without calling the actual x86_pmu.handle_nmi(), which results in unknown NMI errors and massive data loss for PT. The effect is not visible if there are other perf events in the system at the same time that keep active_events counter non-zero, for instance if the NMI watchdog is running, so one needs to disable it to reproduce the problem. At the same time, the active_events counter besides doing what the name suggests also implicitly serves as a PMC hardware and DS area reference counter. This patch adds a separate reference counter for the PMC hardware, leaving active_events for actually counting the events and makes sure it also counts PT and BTS events. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Link: http://lkml.kernel.org/r/87k2v92t0s.fsf@ashishki-desk.ger.corp.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-09 10:03:26 +00:00
atomic_dec(&active_events);
}
void hw_perf_lbr_event_destroy(struct perf_event *event)
{
hw_perf_event_destroy(event);
/* undo the lbr/bts event accounting */
x86_del_exclusive(x86_lbr_exclusive_lbr);
}
static inline int x86_pmu_initialized(void)
{
return x86_pmu.handle_irq != NULL;
}
static inline int
set_ext_hw_attr(struct hw_perf_event *hwc, struct perf_event *event)
{
struct perf_event_attr *attr = &event->attr;
unsigned int cache_type, cache_op, cache_result;
u64 config, val;
config = attr->config;
cache_type = (config >> 0) & 0xff;
if (cache_type >= PERF_COUNT_HW_CACHE_MAX)
return -EINVAL;
cache_type = array_index_nospec(cache_type, PERF_COUNT_HW_CACHE_MAX);
cache_op = (config >> 8) & 0xff;
if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX)
return -EINVAL;
cache_op = array_index_nospec(cache_op, PERF_COUNT_HW_CACHE_OP_MAX);
cache_result = (config >> 16) & 0xff;
if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
return -EINVAL;
cache_result = array_index_nospec(cache_result, PERF_COUNT_HW_CACHE_RESULT_MAX);
val = hw_cache_event_ids[cache_type][cache_op][cache_result];
if (val == 0)
return -ENOENT;
if (val == -1)
return -EINVAL;
hwc->config |= val;
attr->config1 = hw_cache_extra_regs[cache_type][cache_op][cache_result];
return x86_pmu_extra_regs(val, event);
}
int x86_reserve_hardware(void)
{
int err = 0;
perf/x86/intel: Fix PMI handling for Intel PT Intel PT is a separate PMU and it is not using any of the x86_pmu code paths, which means in particular that the active_events counter remains intact when new PT events are created. However, PT uses the generic x86_pmu PMI handler for its PMI handling needs. The problem here is that the latter checks active_events and in case of it being zero, exits without calling the actual x86_pmu.handle_nmi(), which results in unknown NMI errors and massive data loss for PT. The effect is not visible if there are other perf events in the system at the same time that keep active_events counter non-zero, for instance if the NMI watchdog is running, so one needs to disable it to reproduce the problem. At the same time, the active_events counter besides doing what the name suggests also implicitly serves as a PMC hardware and DS area reference counter. This patch adds a separate reference counter for the PMC hardware, leaving active_events for actually counting the events and makes sure it also counts PT and BTS events. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Link: http://lkml.kernel.org/r/87k2v92t0s.fsf@ashishki-desk.ger.corp.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-09 10:03:26 +00:00
if (!atomic_inc_not_zero(&pmc_refcount)) {
mutex_lock(&pmc_reserve_mutex);
perf/x86/intel: Fix PMI handling for Intel PT Intel PT is a separate PMU and it is not using any of the x86_pmu code paths, which means in particular that the active_events counter remains intact when new PT events are created. However, PT uses the generic x86_pmu PMI handler for its PMI handling needs. The problem here is that the latter checks active_events and in case of it being zero, exits without calling the actual x86_pmu.handle_nmi(), which results in unknown NMI errors and massive data loss for PT. The effect is not visible if there are other perf events in the system at the same time that keep active_events counter non-zero, for instance if the NMI watchdog is running, so one needs to disable it to reproduce the problem. At the same time, the active_events counter besides doing what the name suggests also implicitly serves as a PMC hardware and DS area reference counter. This patch adds a separate reference counter for the PMC hardware, leaving active_events for actually counting the events and makes sure it also counts PT and BTS events. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Link: http://lkml.kernel.org/r/87k2v92t0s.fsf@ashishki-desk.ger.corp.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-09 10:03:26 +00:00
if (atomic_read(&pmc_refcount) == 0) {
if (!reserve_pmc_hardware())
err = -EBUSY;
else
reserve_ds_buffers();
}
if (!err)
perf/x86/intel: Fix PMI handling for Intel PT Intel PT is a separate PMU and it is not using any of the x86_pmu code paths, which means in particular that the active_events counter remains intact when new PT events are created. However, PT uses the generic x86_pmu PMI handler for its PMI handling needs. The problem here is that the latter checks active_events and in case of it being zero, exits without calling the actual x86_pmu.handle_nmi(), which results in unknown NMI errors and massive data loss for PT. The effect is not visible if there are other perf events in the system at the same time that keep active_events counter non-zero, for instance if the NMI watchdog is running, so one needs to disable it to reproduce the problem. At the same time, the active_events counter besides doing what the name suggests also implicitly serves as a PMC hardware and DS area reference counter. This patch adds a separate reference counter for the PMC hardware, leaving active_events for actually counting the events and makes sure it also counts PT and BTS events. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Link: http://lkml.kernel.org/r/87k2v92t0s.fsf@ashishki-desk.ger.corp.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-09 10:03:26 +00:00
atomic_inc(&pmc_refcount);
mutex_unlock(&pmc_reserve_mutex);
}
return err;
}
void x86_release_hardware(void)
{
perf/x86/intel: Fix PMI handling for Intel PT Intel PT is a separate PMU and it is not using any of the x86_pmu code paths, which means in particular that the active_events counter remains intact when new PT events are created. However, PT uses the generic x86_pmu PMI handler for its PMI handling needs. The problem here is that the latter checks active_events and in case of it being zero, exits without calling the actual x86_pmu.handle_nmi(), which results in unknown NMI errors and massive data loss for PT. The effect is not visible if there are other perf events in the system at the same time that keep active_events counter non-zero, for instance if the NMI watchdog is running, so one needs to disable it to reproduce the problem. At the same time, the active_events counter besides doing what the name suggests also implicitly serves as a PMC hardware and DS area reference counter. This patch adds a separate reference counter for the PMC hardware, leaving active_events for actually counting the events and makes sure it also counts PT and BTS events. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Link: http://lkml.kernel.org/r/87k2v92t0s.fsf@ashishki-desk.ger.corp.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-09 10:03:26 +00:00
if (atomic_dec_and_mutex_lock(&pmc_refcount, &pmc_reserve_mutex)) {
release_pmc_hardware();
release_ds_buffers();
release_lbr_buffers();
mutex_unlock(&pmc_reserve_mutex);
}
}
/*
* Check if we can create event of a certain type (that no conflicting events
* are present).
*/
int x86_add_exclusive(unsigned int what)
{
int i;
/*
* When lbr_pt_coexist we allow PT to coexist with either LBR or BTS.
* LBR and BTS are still mutually exclusive.
*/
if (x86_pmu.lbr_pt_coexist && what == x86_lbr_exclusive_pt)
goto out;
if (!atomic_inc_not_zero(&x86_pmu.lbr_exclusive[what])) {
mutex_lock(&pmc_reserve_mutex);
for (i = 0; i < ARRAY_SIZE(x86_pmu.lbr_exclusive); i++) {
if (i != what && atomic_read(&x86_pmu.lbr_exclusive[i]))
goto fail_unlock;
}
atomic_inc(&x86_pmu.lbr_exclusive[what]);
mutex_unlock(&pmc_reserve_mutex);
}
out:
atomic_inc(&active_events);
return 0;
fail_unlock:
mutex_unlock(&pmc_reserve_mutex);
return -EBUSY;
}
void x86_del_exclusive(unsigned int what)
{
atomic_dec(&active_events);
/*
* See the comment in x86_add_exclusive().
*/
if (x86_pmu.lbr_pt_coexist && what == x86_lbr_exclusive_pt)
return;
atomic_dec(&x86_pmu.lbr_exclusive[what]);
}
int x86_setup_perfctr(struct perf_event *event)
{
struct perf_event_attr *attr = &event->attr;
struct hw_perf_event *hwc = &event->hw;
u64 config;
if (!is_sampling_event(event)) {
hwc->sample_period = x86_pmu.max_period;
hwc->last_period = hwc->sample_period;
local64_set(&hwc->period_left, hwc->sample_period);
}
if (attr->type == PERF_TYPE_RAW)
return x86_pmu_extra_regs(event->attr.config, event);
if (attr->type == PERF_TYPE_HW_CACHE)
return set_ext_hw_attr(hwc, event);
if (attr->config >= x86_pmu.max_events)
return -EINVAL;
attr->config = array_index_nospec((unsigned long)attr->config, x86_pmu.max_events);
/*
* The generic map:
*/
config = x86_pmu.event_map(attr->config);
if (config == 0)
return -ENOENT;
if (config == -1LL)
return -EINVAL;
hwc->config |= config;
return 0;
}
/*
* check that branch_sample_type is compatible with
* settings needed for precise_ip > 1 which implies
* using the LBR to capture ALL taken branches at the
* priv levels of the measurement
*/
static inline int precise_br_compat(struct perf_event *event)
{
u64 m = event->attr.branch_sample_type;
u64 b = 0;
/* must capture all branches */
if (!(m & PERF_SAMPLE_BRANCH_ANY))
return 0;
m &= PERF_SAMPLE_BRANCH_KERNEL | PERF_SAMPLE_BRANCH_USER;
if (!event->attr.exclude_user)
b |= PERF_SAMPLE_BRANCH_USER;
if (!event->attr.exclude_kernel)
b |= PERF_SAMPLE_BRANCH_KERNEL;
/*
* ignore PERF_SAMPLE_BRANCH_HV, not supported on x86
*/
return m == b;
}
int x86_pmu_max_precise(void)
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 16:54:39 +00:00
{
int precise = 0;
/* Support for constant skid */
if (x86_pmu.pebs_active && !x86_pmu.pebs_broken) {
precise++;
/* Support for IP fixup */
if (x86_pmu.lbr_nr || x86_pmu.intel_cap.pebs_format >= 2)
precise++;
if (x86_pmu.pebs_prec_dist)
precise++;
}
return precise;
}
perf/x86: Use INST_RETIRED.PREC_DIST for cycles: ppp Add a new 'three-p' precise level, that uses INST_RETIRED.PREC_DIST as base. The basic mechanism of abusing the inverse cmask to get all cycles works the same as before. PREC_DIST is available on Sandy Bridge or later. It had some problems on Sandy Bridge, so we only use it on IvyBridge and later. I tested it on Broadwell and Skylake. PREC_DIST has special support for avoiding shadow effects, which can give better results compare to UOPS_RETIRED. The drawback is that PREC_DIST can only schedule on counter 1, but that is ok for cycle sampling, as there is normally no need to do multiple cycle sampling runs in parallel. It is still possible to run perf top in parallel, as that doesn't use precise mode. Also of course the multiplexing can still allow parallel operation. :pp stays with the previous event. Example: Sample a loop with 10 sqrt with old cycles:pp 0.14 │10: sqrtps %xmm1,%xmm0 <-------------- 9.13 │ sqrtps %xmm1,%xmm0 11.58 │ sqrtps %xmm1,%xmm0 11.51 │ sqrtps %xmm1,%xmm0 6.27 │ sqrtps %xmm1,%xmm0 10.38 │ sqrtps %xmm1,%xmm0 12.20 │ sqrtps %xmm1,%xmm0 12.74 │ sqrtps %xmm1,%xmm0 5.40 │ sqrtps %xmm1,%xmm0 10.14 │ sqrtps %xmm1,%xmm0 10.51 │ ↑ jmp 10 We expect all 10 sqrt to get roughly the sample number of samples. But you can see that the instruction directly after the JMP is systematically underestimated in the result, due to sampling shadow effects. With the new PREC_DIST based sampling this problem is gone and all instructions show up roughly evenly: 9.51 │10: sqrtps %xmm1,%xmm0 11.74 │ sqrtps %xmm1,%xmm0 11.84 │ sqrtps %xmm1,%xmm0 6.05 │ sqrtps %xmm1,%xmm0 10.46 │ sqrtps %xmm1,%xmm0 12.25 │ sqrtps %xmm1,%xmm0 12.18 │ sqrtps %xmm1,%xmm0 5.26 │ sqrtps %xmm1,%xmm0 10.13 │ sqrtps %xmm1,%xmm0 10.43 │ sqrtps %xmm1,%xmm0 0.16 │ ↑ jmp 10 Even with PREC_DIST there is still sampling skid and the result is not completely even, but systematic shadow effects are significantly reduced. The improvements are mainly expected to make a difference in high IPC code. With low IPC it should be similar. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: hpa@zytor.com Link: http://lkml.kernel.org/r/1448929689-13771-2-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-12-04 11:50:52 +00:00
int x86_pmu_hw_config(struct perf_event *event)
{
if (event->attr.precise_ip) {
int precise = x86_pmu_max_precise();
if (event->attr.precise_ip > precise)
return -EOPNOTSUPP;
/* There's no sense in having PEBS for non sampling events: */
if (!is_sampling_event(event))
return -EINVAL;
}
/*
* check that PEBS LBR correction does not conflict with
* whatever the user is asking with attr->branch_sample_type
*/
if (event->attr.precise_ip > 1 && x86_pmu.intel_cap.pebs_format < 2) {
u64 *br_type = &event->attr.branch_sample_type;
if (has_branch_stack(event)) {
if (!precise_br_compat(event))
return -EOPNOTSUPP;
/* branch_sample_type is compatible */
} else {
/*
* user did not specify branch_sample_type
*
* For PEBS fixups, we capture all
* the branches at the priv level of the
* event.
*/
*br_type = PERF_SAMPLE_BRANCH_ANY;
if (!event->attr.exclude_user)
*br_type |= PERF_SAMPLE_BRANCH_USER;
if (!event->attr.exclude_kernel)
*br_type |= PERF_SAMPLE_BRANCH_KERNEL;
}
}
if (event->attr.branch_sample_type & PERF_SAMPLE_BRANCH_CALL_STACK)
event->attach_state |= PERF_ATTACH_TASK_DATA;
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 16:54:39 +00:00
/*
* Generate PMC IRQs:
* (keep 'enabled' bit clear for now)
*/
event->hw.config = ARCH_PERFMON_EVENTSEL_INT;
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 16:54:39 +00:00
/*
* Count user and OS events unless requested not to
*/
if (!event->attr.exclude_user)
event->hw.config |= ARCH_PERFMON_EVENTSEL_USR;
if (!event->attr.exclude_kernel)
event->hw.config |= ARCH_PERFMON_EVENTSEL_OS;
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 16:54:39 +00:00
if (event->attr.type == PERF_TYPE_RAW)
event->hw.config |= event->attr.config & X86_RAW_EVENT_MASK;
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 16:54:39 +00:00
perf/x86/intel: Add INST_RETIRED.ALL workarounds On Broadwell INST_RETIRED.ALL cannot be used with any period that doesn't have the lowest 6 bits cleared. And the period should not be smaller than 128. This is erratum BDM11 and BDM55: http://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/5th-gen-core-family-spec-update.pdf BDM11: When using a period < 100; we may get incorrect PEBS/PMI interrupts and/or an invalid counter state. BDM55: When bit0-5 of the period are !0 we may get redundant PEBS records on overflow. Add a new callback to enforce this, and set it for Broadwell. How does this handle the case when an app requests a specific period with some of the bottom bits set? Short answer: Any useful instruction sampling period needs to be 4-6 orders of magnitude larger than 128, as an PMI every 128 instructions would instantly overwhelm the system and be throttled. So the +-64 error from this is really small compared to the period, much smaller than normal system jitter. Long answer (by Peterz): IFF we guarantee perf_event_attr::sample_period >= 128. Suppose we start out with sample_period=192; then we'll set period_left to 192, we'll end up with left = 128 (we truncate the lower bits). We get an interrupt, find that period_left = 64 (>0 so we return 0 and don't get an overflow handler), up that to 128. Then we trigger again, at n=256. Then we find period_left = -64 (<=0 so we return 1 and do get an overflow). We increment with sample_period so we get left = 128. We fire again, at n=384, period_left = 0 (<=0 so we return 1 and get an overflow). And on and on. So while the individual interrupts are 'wrong' we get then with interval=256,128 in exactly the right ratio to average out at 192. And this works for everything >=128. So the num_samples*fixed_period thing is still entirely correct +- 127, which is good enough I'd say, as you already have that error anyhow. So no need to 'fix' the tools, al we need to do is refuse to create INST_RETIRED:ALL events with sample_period < 128. Signed-off-by: Andi Kleen <ak@linux.intel.com> [ Updated comments and changelog a bit. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: http://lkml.kernel.org/r/1424225886-18652-3-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-18 02:18:06 +00:00
if (event->attr.sample_period && x86_pmu.limit_period) {
if (x86_pmu.limit_period(event, event->attr.sample_period) >
event->attr.sample_period)
return -EINVAL;
}
perf/x86: Support outputting XMM registers Starting from Icelake, XMM registers can be collected in PEBS record. But current code only output the pt_regs. Add a new struct x86_perf_regs for both pt_regs and xmm_regs. The xmm_regs will be used later to keep a pointer to PEBS record which has XMM information. XMM registers are 128 bit. To simplify the code, they are handled like two different registers, which means setting two bits in the register bitmap. This also allows only sampling the lower 64bit bits in XMM. The index of XMM registers starts from 32. There are 16 XMM registers. So all reserved space for regs are used. Remove REG_RESERVED. Add PERF_REG_X86_XMM_MAX, which stands for the max number of all x86 regs including both GPRs and XMM. Add REG_NOSUPPORT for 32bit to exclude unsupported registers. Previous platforms can not collect XMM information in PEBS record. Adding pebs_no_xmm_regs to indicate the unsupported platforms. The common code still validates the supported registers. However, it cannot check model specific registers, e.g. XMM. Add extra check in x86_pmu_hw_config() to reject invalid config of regs_user and regs_intr. The regs_user never supports XMM collection. The regs_intr only supports XMM collection when sampling PEBS event on icelake and later platforms. Originally-by: Andi Kleen <ak@linux.intel.com> Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: acme@kernel.org Cc: jolsa@kernel.org Link: https://lkml.kernel.org/r/20190402194509.2832-3-kan.liang@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-02 19:44:59 +00:00
/* sample_regs_user never support XMM registers */
if (unlikely(event->attr.sample_regs_user & PERF_REG_EXTENDED_MASK))
perf/x86: Support outputting XMM registers Starting from Icelake, XMM registers can be collected in PEBS record. But current code only output the pt_regs. Add a new struct x86_perf_regs for both pt_regs and xmm_regs. The xmm_regs will be used later to keep a pointer to PEBS record which has XMM information. XMM registers are 128 bit. To simplify the code, they are handled like two different registers, which means setting two bits in the register bitmap. This also allows only sampling the lower 64bit bits in XMM. The index of XMM registers starts from 32. There are 16 XMM registers. So all reserved space for regs are used. Remove REG_RESERVED. Add PERF_REG_X86_XMM_MAX, which stands for the max number of all x86 regs including both GPRs and XMM. Add REG_NOSUPPORT for 32bit to exclude unsupported registers. Previous platforms can not collect XMM information in PEBS record. Adding pebs_no_xmm_regs to indicate the unsupported platforms. The common code still validates the supported registers. However, it cannot check model specific registers, e.g. XMM. Add extra check in x86_pmu_hw_config() to reject invalid config of regs_user and regs_intr. The regs_user never supports XMM collection. The regs_intr only supports XMM collection when sampling PEBS event on icelake and later platforms. Originally-by: Andi Kleen <ak@linux.intel.com> Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: acme@kernel.org Cc: jolsa@kernel.org Link: https://lkml.kernel.org/r/20190402194509.2832-3-kan.liang@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-02 19:44:59 +00:00
return -EINVAL;
/*
* Besides the general purpose registers, XMM registers may
* be collected in PEBS on some platforms, e.g. Icelake
*/
if (unlikely(event->attr.sample_regs_intr & PERF_REG_EXTENDED_MASK)) {
if (!(event->pmu->capabilities & PERF_PMU_CAP_EXTENDED_REGS))
perf/x86: Support outputting XMM registers Starting from Icelake, XMM registers can be collected in PEBS record. But current code only output the pt_regs. Add a new struct x86_perf_regs for both pt_regs and xmm_regs. The xmm_regs will be used later to keep a pointer to PEBS record which has XMM information. XMM registers are 128 bit. To simplify the code, they are handled like two different registers, which means setting two bits in the register bitmap. This also allows only sampling the lower 64bit bits in XMM. The index of XMM registers starts from 32. There are 16 XMM registers. So all reserved space for regs are used. Remove REG_RESERVED. Add PERF_REG_X86_XMM_MAX, which stands for the max number of all x86 regs including both GPRs and XMM. Add REG_NOSUPPORT for 32bit to exclude unsupported registers. Previous platforms can not collect XMM information in PEBS record. Adding pebs_no_xmm_regs to indicate the unsupported platforms. The common code still validates the supported registers. However, it cannot check model specific registers, e.g. XMM. Add extra check in x86_pmu_hw_config() to reject invalid config of regs_user and regs_intr. The regs_user never supports XMM collection. The regs_intr only supports XMM collection when sampling PEBS event on icelake and later platforms. Originally-by: Andi Kleen <ak@linux.intel.com> Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: acme@kernel.org Cc: jolsa@kernel.org Link: https://lkml.kernel.org/r/20190402194509.2832-3-kan.liang@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-02 19:44:59 +00:00
return -EINVAL;
if (!event->attr.precise_ip)
return -EINVAL;
}
return x86_setup_perfctr(event);
}
/*
* Setup the hardware configuration for a given attr_type
*/
static int __x86_pmu_event_init(struct perf_event *event)
{
int err;
if (!x86_pmu_initialized())
return -ENODEV;
err = x86_reserve_hardware();
if (err)
return err;
perf/x86/intel: Fix PMI handling for Intel PT Intel PT is a separate PMU and it is not using any of the x86_pmu code paths, which means in particular that the active_events counter remains intact when new PT events are created. However, PT uses the generic x86_pmu PMI handler for its PMI handling needs. The problem here is that the latter checks active_events and in case of it being zero, exits without calling the actual x86_pmu.handle_nmi(), which results in unknown NMI errors and massive data loss for PT. The effect is not visible if there are other perf events in the system at the same time that keep active_events counter non-zero, for instance if the NMI watchdog is running, so one needs to disable it to reproduce the problem. At the same time, the active_events counter besides doing what the name suggests also implicitly serves as a PMC hardware and DS area reference counter. This patch adds a separate reference counter for the PMC hardware, leaving active_events for actually counting the events and makes sure it also counts PT and BTS events. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Link: http://lkml.kernel.org/r/87k2v92t0s.fsf@ashishki-desk.ger.corp.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-09 10:03:26 +00:00
atomic_inc(&active_events);
perf: Do the big rename: Performance Counters -> Performance Events Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 10:02:48 +00:00
event->destroy = hw_perf_event_destroy;
event->hw.idx = -1;
event->hw.last_cpu = -1;
event->hw.last_tag = ~0ULL;
/* mark unused */
event->hw.extra_reg.idx = EXTRA_REG_NONE;
event->hw.branch_reg.idx = EXTRA_REG_NONE;
return x86_pmu.hw_config(event);
}
void x86_pmu_disable_all(void)
{
x86: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Acked-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-17 17:30:40 +00:00
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
int idx;
for (idx = 0; idx < x86_pmu.num_counters; idx++) {
perf/x86/amd: Add support for Large Increment per Cycle Events Description of hardware operation --------------------------------- The core AMD PMU has a 4-bit wide per-cycle increment for each performance monitor counter. That works for most events, but now with AMD Family 17h and above processors, some events can occur more than 15 times in a cycle. Those events are called "Large Increment per Cycle" events. In order to count these events, two adjacent h/w PMCs get their count signals merged to form 8 bits per cycle total. In addition, the PERF_CTR count registers are merged to be able to count up to 64 bits. Normally, events like instructions retired, get programmed on a single counter like so: PERF_CTL0 (MSR 0xc0010200) 0x000000000053ff0c # event 0x0c, umask 0xff PERF_CTR0 (MSR 0xc0010201) 0x0000800000000001 # r/w 48-bit count The next counter at MSRs 0xc0010202-3 remains unused, or can be used independently to count something else. When counting Large Increment per Cycle events, such as FLOPs, however, we now have to reserve the next counter and program the PERF_CTL (config) register with the Merge event (0xFFF), like so: PERF_CTL0 (msr 0xc0010200) 0x000000000053ff03 # FLOPs event, umask 0xff PERF_CTR0 (msr 0xc0010201) 0x0000800000000001 # rd 64-bit cnt, wr lo 48b PERF_CTL1 (msr 0xc0010202) 0x0000000f004000ff # Merge event, enable bit PERF_CTR1 (msr 0xc0010203) 0x0000000000000000 # wr hi 16-bits count The count is widened from the normal 48-bits to 64 bits by having the second counter carry the higher 16 bits of the count in its lower 16 bits of its counter register. The odd counter, e.g., PERF_CTL1, is programmed with the enabled Merge event before the even counter, PERF_CTL0. The Large Increment feature is available starting with Family 17h. For more details, search any Family 17h PPR for the "Large Increment per Cycle Events" section, e.g., section 2.1.15.3 on p. 173 in this version: https://www.amd.com/system/files/TechDocs/56176_ppr_Family_17h_Model_71h_B0_pub_Rev_3.06.zip Description of software operation --------------------------------- The following steps are taken in order to support reserving and enabling the extra counter for Large Increment per Cycle events: 1. In the main x86 scheduler, we reduce the number of available counters by the number of Large Increment per Cycle events being scheduled, tracked by a new cpuc variable 'n_pair' and a new amd_put_event_constraints_f17h(). This improves the counter scheduler success rate. 2. In perf_assign_events(), if a counter is assigned to a Large Increment event, we increment the current counter variable, so the counter used for the Merge event is removed from assignment consideration by upcoming event assignments. 3. In find_counter(), if a counter has been found for the Large Increment event, we set the next counter as used, to prevent other events from using it. 4. We perform steps 2 & 3 also in the x86 scheduler fastpath, i.e., we add Merge event accounting to the existing used_mask logic. 5. Finally, we add on the programming of Merge event to the neighbouring PMC counters in the counter enable/disable{_all} code paths. Currently, software does not support a single PMU with mixed 48- and 64-bit counting, so Large increment event counts are limited to 48 bits. In set_period, we zero-out the upper 16 bits of the count, so the hardware doesn't copy them to the even counter's higher bits. Simple invocation example showing counting 8 FLOPs per 256-bit/%ymm vaddps instruction executed in a loop 100 million times: perf stat -e cpu/fp_ret_sse_avx_ops.all/,cpu/instructions/ <workload> Performance counter stats for '<workload>': 800,000,000 cpu/fp_ret_sse_avx_ops.all/u 300,042,101 cpu/instructions/u Prior to this patch, the reported SSE/AVX FLOPs retired count would be wrong. [peterz: lots of renames and edits to the code] Signed-off-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2019-11-14 18:37:20 +00:00
struct hw_perf_event *hwc = &cpuc->events[idx]->hw;
u64 val;
if (!test_bit(idx, cpuc->active_mask))
continue;
rdmsrl(x86_pmu_config_addr(idx), val);
if (!(val & ARCH_PERFMON_EVENTSEL_ENABLE))
continue;
val &= ~ARCH_PERFMON_EVENTSEL_ENABLE;
wrmsrl(x86_pmu_config_addr(idx), val);
perf/x86/amd: Add support for Large Increment per Cycle Events Description of hardware operation --------------------------------- The core AMD PMU has a 4-bit wide per-cycle increment for each performance monitor counter. That works for most events, but now with AMD Family 17h and above processors, some events can occur more than 15 times in a cycle. Those events are called "Large Increment per Cycle" events. In order to count these events, two adjacent h/w PMCs get their count signals merged to form 8 bits per cycle total. In addition, the PERF_CTR count registers are merged to be able to count up to 64 bits. Normally, events like instructions retired, get programmed on a single counter like so: PERF_CTL0 (MSR 0xc0010200) 0x000000000053ff0c # event 0x0c, umask 0xff PERF_CTR0 (MSR 0xc0010201) 0x0000800000000001 # r/w 48-bit count The next counter at MSRs 0xc0010202-3 remains unused, or can be used independently to count something else. When counting Large Increment per Cycle events, such as FLOPs, however, we now have to reserve the next counter and program the PERF_CTL (config) register with the Merge event (0xFFF), like so: PERF_CTL0 (msr 0xc0010200) 0x000000000053ff03 # FLOPs event, umask 0xff PERF_CTR0 (msr 0xc0010201) 0x0000800000000001 # rd 64-bit cnt, wr lo 48b PERF_CTL1 (msr 0xc0010202) 0x0000000f004000ff # Merge event, enable bit PERF_CTR1 (msr 0xc0010203) 0x0000000000000000 # wr hi 16-bits count The count is widened from the normal 48-bits to 64 bits by having the second counter carry the higher 16 bits of the count in its lower 16 bits of its counter register. The odd counter, e.g., PERF_CTL1, is programmed with the enabled Merge event before the even counter, PERF_CTL0. The Large Increment feature is available starting with Family 17h. For more details, search any Family 17h PPR for the "Large Increment per Cycle Events" section, e.g., section 2.1.15.3 on p. 173 in this version: https://www.amd.com/system/files/TechDocs/56176_ppr_Family_17h_Model_71h_B0_pub_Rev_3.06.zip Description of software operation --------------------------------- The following steps are taken in order to support reserving and enabling the extra counter for Large Increment per Cycle events: 1. In the main x86 scheduler, we reduce the number of available counters by the number of Large Increment per Cycle events being scheduled, tracked by a new cpuc variable 'n_pair' and a new amd_put_event_constraints_f17h(). This improves the counter scheduler success rate. 2. In perf_assign_events(), if a counter is assigned to a Large Increment event, we increment the current counter variable, so the counter used for the Merge event is removed from assignment consideration by upcoming event assignments. 3. In find_counter(), if a counter has been found for the Large Increment event, we set the next counter as used, to prevent other events from using it. 4. We perform steps 2 & 3 also in the x86 scheduler fastpath, i.e., we add Merge event accounting to the existing used_mask logic. 5. Finally, we add on the programming of Merge event to the neighbouring PMC counters in the counter enable/disable{_all} code paths. Currently, software does not support a single PMU with mixed 48- and 64-bit counting, so Large increment event counts are limited to 48 bits. In set_period, we zero-out the upper 16 bits of the count, so the hardware doesn't copy them to the even counter's higher bits. Simple invocation example showing counting 8 FLOPs per 256-bit/%ymm vaddps instruction executed in a loop 100 million times: perf stat -e cpu/fp_ret_sse_avx_ops.all/,cpu/instructions/ <workload> Performance counter stats for '<workload>': 800,000,000 cpu/fp_ret_sse_avx_ops.all/u 300,042,101 cpu/instructions/u Prior to this patch, the reported SSE/AVX FLOPs retired count would be wrong. [peterz: lots of renames and edits to the code] Signed-off-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2019-11-14 18:37:20 +00:00
if (is_counter_pair(hwc))
wrmsrl(x86_pmu_config_addr(idx + 1), 0);
}
}
perf/x86/intel: Fix PEBS warning by only restoring active PMU in pmi This patch tries to fix a PEBS warning found in my stress test. The following perf command can easily trigger the pebs warning or spurious NMI error on Skylake/Broadwell/Haswell platforms: sudo perf record -e 'cpu/umask=0x04,event=0xc4/pp,cycles,branches,ref-cycles,cache-misses,cache-references' --call-graph fp -b -c1000 -a Also the NMI watchdog must be enabled. For this case, the events number is larger than counter number. So perf has to do multiplexing. In perf_mux_hrtimer_handler, it does perf_pmu_disable(), schedule out old events, rotate_ctx, schedule in new events and finally perf_pmu_enable(). If the old events include precise event, the MSR_IA32_PEBS_ENABLE should be cleared when perf_pmu_disable(). The MSR_IA32_PEBS_ENABLE should keep 0 until the perf_pmu_enable() is called and the new event is precise event. However, there is a corner case which could restore PEBS_ENABLE to stale value during the above period. In perf_pmu_disable(), GLOBAL_CTRL will be set to 0 to stop overflow and followed PMI. But there may be pending PMI from an earlier overflow, which cannot be stopped. So even GLOBAL_CTRL is cleared, the kernel still be possible to get PMI. At the end of the PMI handler, __intel_pmu_enable_all() will be called, which will restore the stale values if old events haven't scheduled out. Once the stale pebs value is set, it's impossible to be corrected if the new events are non-precise. Because the pebs_enabled will be set to 0. x86_pmu.enable_all() will ignore the MSR_IA32_PEBS_ENABLE setting. As a result, the following NMI with stale PEBS_ENABLE trigger pebs warning. The pending PMI after enabled=0 will become harmless if the NMI handler does not change the state. This patch checks cpuc->enabled in pmi and only restore the state when PMU is active. Here is the dump: Call Trace: <NMI> [<ffffffff813c3a2e>] dump_stack+0x63/0x85 [<ffffffff810a46f2>] warn_slowpath_common+0x82/0xc0 [<ffffffff810a483a>] warn_slowpath_null+0x1a/0x20 [<ffffffff8100fe2e>] intel_pmu_drain_pebs_nhm+0x2be/0x320 [<ffffffff8100caa9>] intel_pmu_handle_irq+0x279/0x460 [<ffffffff810639b6>] ? native_write_msr_safe+0x6/0x40 [<ffffffff811f290d>] ? vunmap_page_range+0x20d/0x330 [<ffffffff811f2f11>] ? unmap_kernel_range_noflush+0x11/0x20 [<ffffffff8148379f>] ? ghes_copy_tofrom_phys+0x10f/0x2a0 [<ffffffff814839c8>] ? ghes_read_estatus+0x98/0x170 [<ffffffff81005a7d>] perf_event_nmi_handler+0x2d/0x50 [<ffffffff810310b9>] nmi_handle+0x69/0x120 [<ffffffff810316f6>] default_do_nmi+0xe6/0x100 [<ffffffff810317f2>] do_nmi+0xe2/0x130 [<ffffffff817aea71>] end_repeat_nmi+0x1a/0x1e [<ffffffff810639b6>] ? native_write_msr_safe+0x6/0x40 [<ffffffff810639b6>] ? native_write_msr_safe+0x6/0x40 [<ffffffff810639b6>] ? native_write_msr_safe+0x6/0x40 <<EOE>> <IRQ> [<ffffffff81006df8>] ? x86_perf_event_set_period+0xd8/0x180 [<ffffffff81006eec>] x86_pmu_start+0x4c/0x100 [<ffffffff8100722d>] x86_pmu_enable+0x28d/0x300 [<ffffffff811994d7>] perf_pmu_enable.part.81+0x7/0x10 [<ffffffff8119cb70>] perf_mux_hrtimer_handler+0x200/0x280 [<ffffffff8119c970>] ? __perf_install_in_context+0xc0/0xc0 [<ffffffff8110f92d>] __hrtimer_run_queues+0xfd/0x280 [<ffffffff811100d8>] hrtimer_interrupt+0xa8/0x190 [<ffffffff81199080>] ? __perf_read_group_add.part.61+0x1a0/0x1a0 [<ffffffff81051bd8>] local_apic_timer_interrupt+0x38/0x60 [<ffffffff817af01d>] smp_apic_timer_interrupt+0x3d/0x50 [<ffffffff817ad15c>] apic_timer_interrupt+0x8c/0xa0 <EOI> [<ffffffff81199080>] ? __perf_read_group_add.part.61+0x1a0/0x1a0 [<ffffffff81123de5>] ? smp_call_function_single+0xd5/0x130 [<ffffffff81123ddb>] ? smp_call_function_single+0xcb/0x130 [<ffffffff81199080>] ? __perf_read_group_add.part.61+0x1a0/0x1a0 [<ffffffff8119765a>] event_function_call+0x10a/0x120 [<ffffffff8119c660>] ? ctx_resched+0x90/0x90 [<ffffffff811971e0>] ? cpu_clock_event_read+0x30/0x30 [<ffffffff811976d0>] ? _perf_event_disable+0x60/0x60 [<ffffffff8119772b>] _perf_event_enable+0x5b/0x70 [<ffffffff81197388>] perf_event_for_each_child+0x38/0xa0 [<ffffffff811976d0>] ? _perf_event_disable+0x60/0x60 [<ffffffff811a0ffd>] perf_ioctl+0x12d/0x3c0 [<ffffffff8134d855>] ? selinux_file_ioctl+0x95/0x1e0 [<ffffffff8124a3a1>] do_vfs_ioctl+0xa1/0x5a0 [<ffffffff81036d29>] ? sched_clock+0x9/0x10 [<ffffffff8124a919>] SyS_ioctl+0x79/0x90 [<ffffffff817ac4b2>] entry_SYSCALL_64_fastpath+0x1a/0xa4 ---[ end trace aef202839fe9a71d ]--- Uhhuh. NMI received for unknown reason 2d on CPU 2. Do you have a strange power saving mode enabled? Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <stable@vger.kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1457046448-6184-1-git-send-email-kan.liang@intel.com [ Fixed various typos and other small details. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-03 23:07:28 +00:00
/*
* There may be PMI landing after enabled=0. The PMI hitting could be before or
* after disable_all.
*
* If PMI hits before disable_all, the PMU will be disabled in the NMI handler.
* It will not be re-enabled in the NMI handler again, because enabled=0. After
* handling the NMI, disable_all will be called, which will not change the
* state either. If PMI hits after disable_all, the PMU is already disabled
* before entering NMI handler. The NMI handler will not change the state
* either.
*
* So either situation is harmless.
*/
2010-06-16 12:37:10 +00:00
static void x86_pmu_disable(struct pmu *pmu)
{
x86: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Acked-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-17 17:30:40 +00:00
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
if (!x86_pmu_initialized())
return;
if (!cpuc->enabled)
return;
cpuc->n_added = 0;
cpuc->enabled = 0;
barrier();
x86_pmu.disable_all();
}
void x86_pmu_enable_all(int added)
{
x86: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Acked-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-17 17:30:40 +00:00
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
int idx;
for (idx = 0; idx < x86_pmu.num_counters; idx++) {
struct hw_perf_event *hwc = &cpuc->events[idx]->hw;
if (!test_bit(idx, cpuc->active_mask))
continue;
__x86_pmu_enable_event(hwc, ARCH_PERFMON_EVENTSEL_ENABLE);
}
}
static struct pmu pmu;
static inline int is_x86_event(struct perf_event *event)
{
return event->pmu == &pmu;
}
perf/x86/intel: Force resched when TFA sysctl is modified This patch provides guarantee to the sysadmin that when TFA is disabled, no PMU event is using PMC3 when the echo command returns. Vice-Versa, when TFA is enabled, PMU can use PMC3 immediately (to eliminate possible multiplexing). $ perf stat -a -I 1000 --no-merge -e branches,branches,branches,branches 1.000123979 125,768,725,208 branches 1.000562520 125,631,000,456 branches 1.000942898 125,487,114,291 branches 1.001333316 125,323,363,620 branches 2.004721306 125,514,968,546 branches 2.005114560 125,511,110,861 branches 2.005482722 125,510,132,724 branches 2.005851245 125,508,967,086 branches 3.006323475 125,166,570,648 branches 3.006709247 125,165,650,056 branches 3.007086605 125,164,639,142 branches 3.007459298 125,164,402,912 branches 4.007922698 125,045,577,140 branches 4.008310775 125,046,804,324 branches 4.008670814 125,048,265,111 branches 4.009039251 125,048,677,611 branches 5.009503373 125,122,240,217 branches 5.009897067 125,122,450,517 branches Then on another connection, sysadmin does: $ echo 1 >/sys/devices/cpu/allow_tsx_force_abort Then perf stat adjusts the events immediately: 5.010286029 125,121,393,483 branches 5.010646308 125,120,556,786 branches 6.011113588 124,963,351,832 branches 6.011510331 124,964,267,566 branches 6.011889913 124,964,829,130 branches 6.012262996 124,965,841,156 branches 7.012708299 124,419,832,234 branches [79.69%] 7.012847908 124,416,363,853 branches [79.73%] 7.013225462 124,400,723,712 branches [79.73%] 7.013598191 124,376,154,434 branches [79.70%] 8.014089834 124,250,862,693 branches [74.98%] 8.014481363 124,267,539,139 branches [74.94%] 8.014856006 124,259,519,786 branches [74.98%] 8.014980848 124,225,457,969 branches [75.04%] 9.015464576 124,204,235,423 branches [75.03%] 9.015858587 124,204,988,490 branches [75.04%] 9.016243680 124,220,092,486 branches [74.99%] 9.016620104 124,231,260,146 branches [74.94%] And vice-versa if the syadmin does: $ echo 0 >/sys/devices/cpu/allow_tsx_force_abort Events are again spread over the 4 counters: 10.017096277 124,276,230,565 branches [74.96%] 10.017237209 124,228,062,171 branches [75.03%] 10.017478637 124,178,780,626 branches [75.03%] 10.017853402 124,198,316,177 branches [75.03%] 11.018334423 124,602,418,933 branches [85.40%] 11.018722584 124,602,921,320 branches [85.42%] 11.019095621 124,603,956,093 branches [85.42%] 11.019467742 124,595,273,783 branches [85.42%] 12.019945736 125,110,114,864 branches 12.020330764 125,109,334,472 branches 12.020688740 125,109,818,865 branches 12.021054020 125,108,594,014 branches 13.021516774 125,109,164,018 branches 13.021903640 125,108,794,510 branches 13.022270770 125,107,756,978 branches 13.022630819 125,109,380,471 branches 14.023114989 125,133,140,817 branches 14.023501880 125,133,785,858 branches 14.023868339 125,133,852,700 branches Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: kan.liang@intel.com Cc: nelson.dsouza@intel.com Cc: tonyj@suse.com Link: https://lkml.kernel.org/r/20190408173252.37932-3-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-08 17:32:52 +00:00
struct pmu *x86_get_pmu(void)
{
return &pmu;
}
/*
* Event scheduler state:
*
* Assign events iterating over all events and counters, beginning
* with events with least weights first. Keep the current iterator
* state in struct sched_state.
*/
struct sched_state {
int weight;
int event; /* event index */
int counter; /* counter index */
int unassigned; /* number of events to be assigned left */
int nr_gp; /* number of GP counters used */
perf/x86/amd: Add support for Large Increment per Cycle Events Description of hardware operation --------------------------------- The core AMD PMU has a 4-bit wide per-cycle increment for each performance monitor counter. That works for most events, but now with AMD Family 17h and above processors, some events can occur more than 15 times in a cycle. Those events are called "Large Increment per Cycle" events. In order to count these events, two adjacent h/w PMCs get their count signals merged to form 8 bits per cycle total. In addition, the PERF_CTR count registers are merged to be able to count up to 64 bits. Normally, events like instructions retired, get programmed on a single counter like so: PERF_CTL0 (MSR 0xc0010200) 0x000000000053ff0c # event 0x0c, umask 0xff PERF_CTR0 (MSR 0xc0010201) 0x0000800000000001 # r/w 48-bit count The next counter at MSRs 0xc0010202-3 remains unused, or can be used independently to count something else. When counting Large Increment per Cycle events, such as FLOPs, however, we now have to reserve the next counter and program the PERF_CTL (config) register with the Merge event (0xFFF), like so: PERF_CTL0 (msr 0xc0010200) 0x000000000053ff03 # FLOPs event, umask 0xff PERF_CTR0 (msr 0xc0010201) 0x0000800000000001 # rd 64-bit cnt, wr lo 48b PERF_CTL1 (msr 0xc0010202) 0x0000000f004000ff # Merge event, enable bit PERF_CTR1 (msr 0xc0010203) 0x0000000000000000 # wr hi 16-bits count The count is widened from the normal 48-bits to 64 bits by having the second counter carry the higher 16 bits of the count in its lower 16 bits of its counter register. The odd counter, e.g., PERF_CTL1, is programmed with the enabled Merge event before the even counter, PERF_CTL0. The Large Increment feature is available starting with Family 17h. For more details, search any Family 17h PPR for the "Large Increment per Cycle Events" section, e.g., section 2.1.15.3 on p. 173 in this version: https://www.amd.com/system/files/TechDocs/56176_ppr_Family_17h_Model_71h_B0_pub_Rev_3.06.zip Description of software operation --------------------------------- The following steps are taken in order to support reserving and enabling the extra counter for Large Increment per Cycle events: 1. In the main x86 scheduler, we reduce the number of available counters by the number of Large Increment per Cycle events being scheduled, tracked by a new cpuc variable 'n_pair' and a new amd_put_event_constraints_f17h(). This improves the counter scheduler success rate. 2. In perf_assign_events(), if a counter is assigned to a Large Increment event, we increment the current counter variable, so the counter used for the Merge event is removed from assignment consideration by upcoming event assignments. 3. In find_counter(), if a counter has been found for the Large Increment event, we set the next counter as used, to prevent other events from using it. 4. We perform steps 2 & 3 also in the x86 scheduler fastpath, i.e., we add Merge event accounting to the existing used_mask logic. 5. Finally, we add on the programming of Merge event to the neighbouring PMC counters in the counter enable/disable{_all} code paths. Currently, software does not support a single PMU with mixed 48- and 64-bit counting, so Large increment event counts are limited to 48 bits. In set_period, we zero-out the upper 16 bits of the count, so the hardware doesn't copy them to the even counter's higher bits. Simple invocation example showing counting 8 FLOPs per 256-bit/%ymm vaddps instruction executed in a loop 100 million times: perf stat -e cpu/fp_ret_sse_avx_ops.all/,cpu/instructions/ <workload> Performance counter stats for '<workload>': 800,000,000 cpu/fp_ret_sse_avx_ops.all/u 300,042,101 cpu/instructions/u Prior to this patch, the reported SSE/AVX FLOPs retired count would be wrong. [peterz: lots of renames and edits to the code] Signed-off-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2019-11-14 18:37:20 +00:00
u64 used;
};
perf, x86: Fix event scheduler for constraints with overlapping counters The current x86 event scheduler fails to resolve scheduling problems of certain combinations of events and constraints. This happens if the counter mask of such an event is not a subset of any other counter mask of a constraint with an equal or higher weight, e.g. constraints of the AMD family 15h pmu: counter mask weight amd_f15_PMC30 0x09 2 <--- overlapping counters amd_f15_PMC20 0x07 3 amd_f15_PMC53 0x38 3 The scheduler does not find then an existing solution. Here is an example: event code counter failure possible solution 0x02E PMC[3,0] 0 3 0x043 PMC[2:0] 1 0 0x045 PMC[2:0] 2 1 0x046 PMC[2:0] FAIL 2 The event scheduler may not select the correct counter in the first cycle because it needs to know which subsequent events will be scheduled. It may fail to schedule the events then. To solve this, we now save the scheduler state of events with overlapping counter counstraints. If we fail to schedule the events we rollback to those states and try to use another free counter. Constraints with overlapping counters are marked with a new introduced overlap flag. We set the overlap flag for such constraints to give the scheduler a hint which events to select for counter rescheduling. The EVENT_CONSTRAINT_OVERLAP() macro can be used for this. Care must be taken as the rescheduling algorithm is O(n!) which will increase scheduling cycles for an over-commited system dramatically. The number of such EVENT_CONSTRAINT_OVERLAP() macros and its counter masks must be kept at a minimum. Thus, the current stack is limited to 2 states to limit the number of loops the algorithm takes in the worst case. On systems with no overlapping-counter constraints, this implementation does not increase the loop count compared to the previous algorithm. V2: * Renamed redo -> overlap. * Reimplementation using perf scheduling helper functions. V3: * Added WARN_ON_ONCE() if out of save states. * Changed function interface of perf_sched_restore_state() to use bool as return value. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1321616122-1533-3-git-send-email-robert.richter@amd.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-11-18 11:35:22 +00:00
/* Total max is X86_PMC_IDX_MAX, but we are O(n!) limited */
#define SCHED_STATES_MAX 2
struct perf_sched {
int max_weight;
int max_events;
int max_gp;
int saved_states;
perf/x86: Fix event/group validation Commit 43b4578071c0 ("perf/x86: Reduce stack usage of x86_schedule_events()") violated the rule that 'fake' scheduling; as used for event/group validation; should not change the event state. This went mostly un-noticed because repeated calls of x86_pmu::get_event_constraints() would give the same result. And x86_pmu::put_event_constraints() would mostly not do anything. Commit e979121b1b15 ("perf/x86/intel: Implement cross-HT corruption bug workaround") made the situation much worse by actually setting the event->hw.constraint value to NULL, so when validation and actual scheduling interact we get NULL ptr derefs. Fix it by removing the constraint pointer from the event and move it back to an array, this time in cpuc instead of on the stack. validate_group() x86_schedule_events() event->hw.constraint = c; # store <context switch> perf_task_event_sched_in() ... x86_schedule_events(); event->hw.constraint = c2; # store ... put_event_constraints(event); # assume failure to schedule intel_put_event_constraints() event->hw.constraint = NULL; <context switch end> c = event->hw.constraint; # read -> NULL if (!test_bit(hwc->idx, c->idxmsk)) # <- *BOOM* NULL deref This in particular is possible when the event in question is a cpu-wide event and group-leader, where the validate_group() tries to add an event to the group. Reported-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Hunter <ahh@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 43b4578071c0 ("perf/x86: Reduce stack usage of x86_schedule_events()") Fixes: e979121b1b15 ("perf/x86/intel: Implement cross-HT corruption bug workaround") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-21 08:57:13 +00:00
struct event_constraint **constraints;
struct sched_state state;
perf, x86: Fix event scheduler for constraints with overlapping counters The current x86 event scheduler fails to resolve scheduling problems of certain combinations of events and constraints. This happens if the counter mask of such an event is not a subset of any other counter mask of a constraint with an equal or higher weight, e.g. constraints of the AMD family 15h pmu: counter mask weight amd_f15_PMC30 0x09 2 <--- overlapping counters amd_f15_PMC20 0x07 3 amd_f15_PMC53 0x38 3 The scheduler does not find then an existing solution. Here is an example: event code counter failure possible solution 0x02E PMC[3,0] 0 3 0x043 PMC[2:0] 1 0 0x045 PMC[2:0] 2 1 0x046 PMC[2:0] FAIL 2 The event scheduler may not select the correct counter in the first cycle because it needs to know which subsequent events will be scheduled. It may fail to schedule the events then. To solve this, we now save the scheduler state of events with overlapping counter counstraints. If we fail to schedule the events we rollback to those states and try to use another free counter. Constraints with overlapping counters are marked with a new introduced overlap flag. We set the overlap flag for such constraints to give the scheduler a hint which events to select for counter rescheduling. The EVENT_CONSTRAINT_OVERLAP() macro can be used for this. Care must be taken as the rescheduling algorithm is O(n!) which will increase scheduling cycles for an over-commited system dramatically. The number of such EVENT_CONSTRAINT_OVERLAP() macros and its counter masks must be kept at a minimum. Thus, the current stack is limited to 2 states to limit the number of loops the algorithm takes in the worst case. On systems with no overlapping-counter constraints, this implementation does not increase the loop count compared to the previous algorithm. V2: * Renamed redo -> overlap. * Reimplementation using perf scheduling helper functions. V3: * Added WARN_ON_ONCE() if out of save states. * Changed function interface of perf_sched_restore_state() to use bool as return value. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1321616122-1533-3-git-send-email-robert.richter@amd.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-11-18 11:35:22 +00:00
struct sched_state saved[SCHED_STATES_MAX];
};
/*
* Initialize interator that runs through all events and counters.
*/
perf/x86: Fix event/group validation Commit 43b4578071c0 ("perf/x86: Reduce stack usage of x86_schedule_events()") violated the rule that 'fake' scheduling; as used for event/group validation; should not change the event state. This went mostly un-noticed because repeated calls of x86_pmu::get_event_constraints() would give the same result. And x86_pmu::put_event_constraints() would mostly not do anything. Commit e979121b1b15 ("perf/x86/intel: Implement cross-HT corruption bug workaround") made the situation much worse by actually setting the event->hw.constraint value to NULL, so when validation and actual scheduling interact we get NULL ptr derefs. Fix it by removing the constraint pointer from the event and move it back to an array, this time in cpuc instead of on the stack. validate_group() x86_schedule_events() event->hw.constraint = c; # store <context switch> perf_task_event_sched_in() ... x86_schedule_events(); event->hw.constraint = c2; # store ... put_event_constraints(event); # assume failure to schedule intel_put_event_constraints() event->hw.constraint = NULL; <context switch end> c = event->hw.constraint; # read -> NULL if (!test_bit(hwc->idx, c->idxmsk)) # <- *BOOM* NULL deref This in particular is possible when the event in question is a cpu-wide event and group-leader, where the validate_group() tries to add an event to the group. Reported-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Hunter <ahh@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 43b4578071c0 ("perf/x86: Reduce stack usage of x86_schedule_events()") Fixes: e979121b1b15 ("perf/x86/intel: Implement cross-HT corruption bug workaround") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-21 08:57:13 +00:00
static void perf_sched_init(struct perf_sched *sched, struct event_constraint **constraints,
int num, int wmin, int wmax, int gpmax)
{
int idx;
memset(sched, 0, sizeof(*sched));
sched->max_events = num;
sched->max_weight = wmax;
sched->max_gp = gpmax;
perf/x86: Fix event/group validation Commit 43b4578071c0 ("perf/x86: Reduce stack usage of x86_schedule_events()") violated the rule that 'fake' scheduling; as used for event/group validation; should not change the event state. This went mostly un-noticed because repeated calls of x86_pmu::get_event_constraints() would give the same result. And x86_pmu::put_event_constraints() would mostly not do anything. Commit e979121b1b15 ("perf/x86/intel: Implement cross-HT corruption bug workaround") made the situation much worse by actually setting the event->hw.constraint value to NULL, so when validation and actual scheduling interact we get NULL ptr derefs. Fix it by removing the constraint pointer from the event and move it back to an array, this time in cpuc instead of on the stack. validate_group() x86_schedule_events() event->hw.constraint = c; # store <context switch> perf_task_event_sched_in() ... x86_schedule_events(); event->hw.constraint = c2; # store ... put_event_constraints(event); # assume failure to schedule intel_put_event_constraints() event->hw.constraint = NULL; <context switch end> c = event->hw.constraint; # read -> NULL if (!test_bit(hwc->idx, c->idxmsk)) # <- *BOOM* NULL deref This in particular is possible when the event in question is a cpu-wide event and group-leader, where the validate_group() tries to add an event to the group. Reported-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Hunter <ahh@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 43b4578071c0 ("perf/x86: Reduce stack usage of x86_schedule_events()") Fixes: e979121b1b15 ("perf/x86/intel: Implement cross-HT corruption bug workaround") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-21 08:57:13 +00:00
sched->constraints = constraints;
for (idx = 0; idx < num; idx++) {
perf/x86: Fix event/group validation Commit 43b4578071c0 ("perf/x86: Reduce stack usage of x86_schedule_events()") violated the rule that 'fake' scheduling; as used for event/group validation; should not change the event state. This went mostly un-noticed because repeated calls of x86_pmu::get_event_constraints() would give the same result. And x86_pmu::put_event_constraints() would mostly not do anything. Commit e979121b1b15 ("perf/x86/intel: Implement cross-HT corruption bug workaround") made the situation much worse by actually setting the event->hw.constraint value to NULL, so when validation and actual scheduling interact we get NULL ptr derefs. Fix it by removing the constraint pointer from the event and move it back to an array, this time in cpuc instead of on the stack. validate_group() x86_schedule_events() event->hw.constraint = c; # store <context switch> perf_task_event_sched_in() ... x86_schedule_events(); event->hw.constraint = c2; # store ... put_event_constraints(event); # assume failure to schedule intel_put_event_constraints() event->hw.constraint = NULL; <context switch end> c = event->hw.constraint; # read -> NULL if (!test_bit(hwc->idx, c->idxmsk)) # <- *BOOM* NULL deref This in particular is possible when the event in question is a cpu-wide event and group-leader, where the validate_group() tries to add an event to the group. Reported-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Hunter <ahh@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 43b4578071c0 ("perf/x86: Reduce stack usage of x86_schedule_events()") Fixes: e979121b1b15 ("perf/x86/intel: Implement cross-HT corruption bug workaround") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-21 08:57:13 +00:00
if (constraints[idx]->weight == wmin)
break;
}
sched->state.event = idx; /* start with min weight */
sched->state.weight = wmin;
sched->state.unassigned = num;
}
perf, x86: Fix event scheduler for constraints with overlapping counters The current x86 event scheduler fails to resolve scheduling problems of certain combinations of events and constraints. This happens if the counter mask of such an event is not a subset of any other counter mask of a constraint with an equal or higher weight, e.g. constraints of the AMD family 15h pmu: counter mask weight amd_f15_PMC30 0x09 2 <--- overlapping counters amd_f15_PMC20 0x07 3 amd_f15_PMC53 0x38 3 The scheduler does not find then an existing solution. Here is an example: event code counter failure possible solution 0x02E PMC[3,0] 0 3 0x043 PMC[2:0] 1 0 0x045 PMC[2:0] 2 1 0x046 PMC[2:0] FAIL 2 The event scheduler may not select the correct counter in the first cycle because it needs to know which subsequent events will be scheduled. It may fail to schedule the events then. To solve this, we now save the scheduler state of events with overlapping counter counstraints. If we fail to schedule the events we rollback to those states and try to use another free counter. Constraints with overlapping counters are marked with a new introduced overlap flag. We set the overlap flag for such constraints to give the scheduler a hint which events to select for counter rescheduling. The EVENT_CONSTRAINT_OVERLAP() macro can be used for this. Care must be taken as the rescheduling algorithm is O(n!) which will increase scheduling cycles for an over-commited system dramatically. The number of such EVENT_CONSTRAINT_OVERLAP() macros and its counter masks must be kept at a minimum. Thus, the current stack is limited to 2 states to limit the number of loops the algorithm takes in the worst case. On systems with no overlapping-counter constraints, this implementation does not increase the loop count compared to the previous algorithm. V2: * Renamed redo -> overlap. * Reimplementation using perf scheduling helper functions. V3: * Added WARN_ON_ONCE() if out of save states. * Changed function interface of perf_sched_restore_state() to use bool as return value. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1321616122-1533-3-git-send-email-robert.richter@amd.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-11-18 11:35:22 +00:00
static void perf_sched_save_state(struct perf_sched *sched)
{
if (WARN_ON_ONCE(sched->saved_states >= SCHED_STATES_MAX))
return;
sched->saved[sched->saved_states] = sched->state;
sched->saved_states++;
}
static bool perf_sched_restore_state(struct perf_sched *sched)
{
if (!sched->saved_states)
return false;
sched->saved_states--;
sched->state = sched->saved[sched->saved_states];
perf/x86/amd: Add support for Large Increment per Cycle Events Description of hardware operation --------------------------------- The core AMD PMU has a 4-bit wide per-cycle increment for each performance monitor counter. That works for most events, but now with AMD Family 17h and above processors, some events can occur more than 15 times in a cycle. Those events are called "Large Increment per Cycle" events. In order to count these events, two adjacent h/w PMCs get their count signals merged to form 8 bits per cycle total. In addition, the PERF_CTR count registers are merged to be able to count up to 64 bits. Normally, events like instructions retired, get programmed on a single counter like so: PERF_CTL0 (MSR 0xc0010200) 0x000000000053ff0c # event 0x0c, umask 0xff PERF_CTR0 (MSR 0xc0010201) 0x0000800000000001 # r/w 48-bit count The next counter at MSRs 0xc0010202-3 remains unused, or can be used independently to count something else. When counting Large Increment per Cycle events, such as FLOPs, however, we now have to reserve the next counter and program the PERF_CTL (config) register with the Merge event (0xFFF), like so: PERF_CTL0 (msr 0xc0010200) 0x000000000053ff03 # FLOPs event, umask 0xff PERF_CTR0 (msr 0xc0010201) 0x0000800000000001 # rd 64-bit cnt, wr lo 48b PERF_CTL1 (msr 0xc0010202) 0x0000000f004000ff # Merge event, enable bit PERF_CTR1 (msr 0xc0010203) 0x0000000000000000 # wr hi 16-bits count The count is widened from the normal 48-bits to 64 bits by having the second counter carry the higher 16 bits of the count in its lower 16 bits of its counter register. The odd counter, e.g., PERF_CTL1, is programmed with the enabled Merge event before the even counter, PERF_CTL0. The Large Increment feature is available starting with Family 17h. For more details, search any Family 17h PPR for the "Large Increment per Cycle Events" section, e.g., section 2.1.15.3 on p. 173 in this version: https://www.amd.com/system/files/TechDocs/56176_ppr_Family_17h_Model_71h_B0_pub_Rev_3.06.zip Description of software operation --------------------------------- The following steps are taken in order to support reserving and enabling the extra counter for Large Increment per Cycle events: 1. In the main x86 scheduler, we reduce the number of available counters by the number of Large Increment per Cycle events being scheduled, tracked by a new cpuc variable 'n_pair' and a new amd_put_event_constraints_f17h(). This improves the counter scheduler success rate. 2. In perf_assign_events(), if a counter is assigned to a Large Increment event, we increment the current counter variable, so the counter used for the Merge event is removed from assignment consideration by upcoming event assignments. 3. In find_counter(), if a counter has been found for the Large Increment event, we set the next counter as used, to prevent other events from using it. 4. We perform steps 2 & 3 also in the x86 scheduler fastpath, i.e., we add Merge event accounting to the existing used_mask logic. 5. Finally, we add on the programming of Merge event to the neighbouring PMC counters in the counter enable/disable{_all} code paths. Currently, software does not support a single PMU with mixed 48- and 64-bit counting, so Large increment event counts are limited to 48 bits. In set_period, we zero-out the upper 16 bits of the count, so the hardware doesn't copy them to the even counter's higher bits. Simple invocation example showing counting 8 FLOPs per 256-bit/%ymm vaddps instruction executed in a loop 100 million times: perf stat -e cpu/fp_ret_sse_avx_ops.all/,cpu/instructions/ <workload> Performance counter stats for '<workload>': 800,000,000 cpu/fp_ret_sse_avx_ops.all/u 300,042,101 cpu/instructions/u Prior to this patch, the reported SSE/AVX FLOPs retired count would be wrong. [peterz: lots of renames and edits to the code] Signed-off-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2019-11-14 18:37:20 +00:00
/* this assignment didn't work out */
/* XXX broken vs EVENT_PAIR */
sched->state.used &= ~BIT_ULL(sched->state.counter);
/* try the next one */
sched->state.counter++;
perf, x86: Fix event scheduler for constraints with overlapping counters The current x86 event scheduler fails to resolve scheduling problems of certain combinations of events and constraints. This happens if the counter mask of such an event is not a subset of any other counter mask of a constraint with an equal or higher weight, e.g. constraints of the AMD family 15h pmu: counter mask weight amd_f15_PMC30 0x09 2 <--- overlapping counters amd_f15_PMC20 0x07 3 amd_f15_PMC53 0x38 3 The scheduler does not find then an existing solution. Here is an example: event code counter failure possible solution 0x02E PMC[3,0] 0 3 0x043 PMC[2:0] 1 0 0x045 PMC[2:0] 2 1 0x046 PMC[2:0] FAIL 2 The event scheduler may not select the correct counter in the first cycle because it needs to know which subsequent events will be scheduled. It may fail to schedule the events then. To solve this, we now save the scheduler state of events with overlapping counter counstraints. If we fail to schedule the events we rollback to those states and try to use another free counter. Constraints with overlapping counters are marked with a new introduced overlap flag. We set the overlap flag for such constraints to give the scheduler a hint which events to select for counter rescheduling. The EVENT_CONSTRAINT_OVERLAP() macro can be used for this. Care must be taken as the rescheduling algorithm is O(n!) which will increase scheduling cycles for an over-commited system dramatically. The number of such EVENT_CONSTRAINT_OVERLAP() macros and its counter masks must be kept at a minimum. Thus, the current stack is limited to 2 states to limit the number of loops the algorithm takes in the worst case. On systems with no overlapping-counter constraints, this implementation does not increase the loop count compared to the previous algorithm. V2: * Renamed redo -> overlap. * Reimplementation using perf scheduling helper functions. V3: * Added WARN_ON_ONCE() if out of save states. * Changed function interface of perf_sched_restore_state() to use bool as return value. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1321616122-1533-3-git-send-email-robert.richter@amd.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-11-18 11:35:22 +00:00
return true;
}
/*
* Select a counter for the current event to schedule. Return true on
* success.
*/
perf, x86: Fix event scheduler for constraints with overlapping counters The current x86 event scheduler fails to resolve scheduling problems of certain combinations of events and constraints. This happens if the counter mask of such an event is not a subset of any other counter mask of a constraint with an equal or higher weight, e.g. constraints of the AMD family 15h pmu: counter mask weight amd_f15_PMC30 0x09 2 <--- overlapping counters amd_f15_PMC20 0x07 3 amd_f15_PMC53 0x38 3 The scheduler does not find then an existing solution. Here is an example: event code counter failure possible solution 0x02E PMC[3,0] 0 3 0x043 PMC[2:0] 1 0 0x045 PMC[2:0] 2 1 0x046 PMC[2:0] FAIL 2 The event scheduler may not select the correct counter in the first cycle because it needs to know which subsequent events will be scheduled. It may fail to schedule the events then. To solve this, we now save the scheduler state of events with overlapping counter counstraints. If we fail to schedule the events we rollback to those states and try to use another free counter. Constraints with overlapping counters are marked with a new introduced overlap flag. We set the overlap flag for such constraints to give the scheduler a hint which events to select for counter rescheduling. The EVENT_CONSTRAINT_OVERLAP() macro can be used for this. Care must be taken as the rescheduling algorithm is O(n!) which will increase scheduling cycles for an over-commited system dramatically. The number of such EVENT_CONSTRAINT_OVERLAP() macros and its counter masks must be kept at a minimum. Thus, the current stack is limited to 2 states to limit the number of loops the algorithm takes in the worst case. On systems with no overlapping-counter constraints, this implementation does not increase the loop count compared to the previous algorithm. V2: * Renamed redo -> overlap. * Reimplementation using perf scheduling helper functions. V3: * Added WARN_ON_ONCE() if out of save states. * Changed function interface of perf_sched_restore_state() to use bool as return value. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1321616122-1533-3-git-send-email-robert.richter@amd.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-11-18 11:35:22 +00:00
static bool __perf_sched_find_counter(struct perf_sched *sched)
{
struct event_constraint *c;
int idx;
if (!sched->state.unassigned)
return false;
if (sched->state.event >= sched->max_events)
return false;
perf/x86: Fix event/group validation Commit 43b4578071c0 ("perf/x86: Reduce stack usage of x86_schedule_events()") violated the rule that 'fake' scheduling; as used for event/group validation; should not change the event state. This went mostly un-noticed because repeated calls of x86_pmu::get_event_constraints() would give the same result. And x86_pmu::put_event_constraints() would mostly not do anything. Commit e979121b1b15 ("perf/x86/intel: Implement cross-HT corruption bug workaround") made the situation much worse by actually setting the event->hw.constraint value to NULL, so when validation and actual scheduling interact we get NULL ptr derefs. Fix it by removing the constraint pointer from the event and move it back to an array, this time in cpuc instead of on the stack. validate_group() x86_schedule_events() event->hw.constraint = c; # store <context switch> perf_task_event_sched_in() ... x86_schedule_events(); event->hw.constraint = c2; # store ... put_event_constraints(event); # assume failure to schedule intel_put_event_constraints() event->hw.constraint = NULL; <context switch end> c = event->hw.constraint; # read -> NULL if (!test_bit(hwc->idx, c->idxmsk)) # <- *BOOM* NULL deref This in particular is possible when the event in question is a cpu-wide event and group-leader, where the validate_group() tries to add an event to the group. Reported-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Hunter <ahh@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 43b4578071c0 ("perf/x86: Reduce stack usage of x86_schedule_events()") Fixes: e979121b1b15 ("perf/x86/intel: Implement cross-HT corruption bug workaround") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-21 08:57:13 +00:00
c = sched->constraints[sched->state.event];
/* Prefer fixed purpose counters */
if (c->idxmsk64 & (~0ULL << INTEL_PMC_IDX_FIXED)) {
idx = INTEL_PMC_IDX_FIXED;
for_each_set_bit_from(idx, c->idxmsk, X86_PMC_IDX_MAX) {
perf/x86/amd: Add support for Large Increment per Cycle Events Description of hardware operation --------------------------------- The core AMD PMU has a 4-bit wide per-cycle increment for each performance monitor counter. That works for most events, but now with AMD Family 17h and above processors, some events can occur more than 15 times in a cycle. Those events are called "Large Increment per Cycle" events. In order to count these events, two adjacent h/w PMCs get their count signals merged to form 8 bits per cycle total. In addition, the PERF_CTR count registers are merged to be able to count up to 64 bits. Normally, events like instructions retired, get programmed on a single counter like so: PERF_CTL0 (MSR 0xc0010200) 0x000000000053ff0c # event 0x0c, umask 0xff PERF_CTR0 (MSR 0xc0010201) 0x0000800000000001 # r/w 48-bit count The next counter at MSRs 0xc0010202-3 remains unused, or can be used independently to count something else. When counting Large Increment per Cycle events, such as FLOPs, however, we now have to reserve the next counter and program the PERF_CTL (config) register with the Merge event (0xFFF), like so: PERF_CTL0 (msr 0xc0010200) 0x000000000053ff03 # FLOPs event, umask 0xff PERF_CTR0 (msr 0xc0010201) 0x0000800000000001 # rd 64-bit cnt, wr lo 48b PERF_CTL1 (msr 0xc0010202) 0x0000000f004000ff # Merge event, enable bit PERF_CTR1 (msr 0xc0010203) 0x0000000000000000 # wr hi 16-bits count The count is widened from the normal 48-bits to 64 bits by having the second counter carry the higher 16 bits of the count in its lower 16 bits of its counter register. The odd counter, e.g., PERF_CTL1, is programmed with the enabled Merge event before the even counter, PERF_CTL0. The Large Increment feature is available starting with Family 17h. For more details, search any Family 17h PPR for the "Large Increment per Cycle Events" section, e.g., section 2.1.15.3 on p. 173 in this version: https://www.amd.com/system/files/TechDocs/56176_ppr_Family_17h_Model_71h_B0_pub_Rev_3.06.zip Description of software operation --------------------------------- The following steps are taken in order to support reserving and enabling the extra counter for Large Increment per Cycle events: 1. In the main x86 scheduler, we reduce the number of available counters by the number of Large Increment per Cycle events being scheduled, tracked by a new cpuc variable 'n_pair' and a new amd_put_event_constraints_f17h(). This improves the counter scheduler success rate. 2. In perf_assign_events(), if a counter is assigned to a Large Increment event, we increment the current counter variable, so the counter used for the Merge event is removed from assignment consideration by upcoming event assignments. 3. In find_counter(), if a counter has been found for the Large Increment event, we set the next counter as used, to prevent other events from using it. 4. We perform steps 2 & 3 also in the x86 scheduler fastpath, i.e., we add Merge event accounting to the existing used_mask logic. 5. Finally, we add on the programming of Merge event to the neighbouring PMC counters in the counter enable/disable{_all} code paths. Currently, software does not support a single PMU with mixed 48- and 64-bit counting, so Large increment event counts are limited to 48 bits. In set_period, we zero-out the upper 16 bits of the count, so the hardware doesn't copy them to the even counter's higher bits. Simple invocation example showing counting 8 FLOPs per 256-bit/%ymm vaddps instruction executed in a loop 100 million times: perf stat -e cpu/fp_ret_sse_avx_ops.all/,cpu/instructions/ <workload> Performance counter stats for '<workload>': 800,000,000 cpu/fp_ret_sse_avx_ops.all/u 300,042,101 cpu/instructions/u Prior to this patch, the reported SSE/AVX FLOPs retired count would be wrong. [peterz: lots of renames and edits to the code] Signed-off-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2019-11-14 18:37:20 +00:00
u64 mask = BIT_ULL(idx);
if (sched->state.used & mask)
continue;
sched->state.used |= mask;
goto done;
}
}
/* Grab the first unused counter starting with idx */
idx = sched->state.counter;
for_each_set_bit_from(idx, c->idxmsk, INTEL_PMC_IDX_FIXED) {
perf/x86/amd: Add support for Large Increment per Cycle Events Description of hardware operation --------------------------------- The core AMD PMU has a 4-bit wide per-cycle increment for each performance monitor counter. That works for most events, but now with AMD Family 17h and above processors, some events can occur more than 15 times in a cycle. Those events are called "Large Increment per Cycle" events. In order to count these events, two adjacent h/w PMCs get their count signals merged to form 8 bits per cycle total. In addition, the PERF_CTR count registers are merged to be able to count up to 64 bits. Normally, events like instructions retired, get programmed on a single counter like so: PERF_CTL0 (MSR 0xc0010200) 0x000000000053ff0c # event 0x0c, umask 0xff PERF_CTR0 (MSR 0xc0010201) 0x0000800000000001 # r/w 48-bit count The next counter at MSRs 0xc0010202-3 remains unused, or can be used independently to count something else. When counting Large Increment per Cycle events, such as FLOPs, however, we now have to reserve the next counter and program the PERF_CTL (config) register with the Merge event (0xFFF), like so: PERF_CTL0 (msr 0xc0010200) 0x000000000053ff03 # FLOPs event, umask 0xff PERF_CTR0 (msr 0xc0010201) 0x0000800000000001 # rd 64-bit cnt, wr lo 48b PERF_CTL1 (msr 0xc0010202) 0x0000000f004000ff # Merge event, enable bit PERF_CTR1 (msr 0xc0010203) 0x0000000000000000 # wr hi 16-bits count The count is widened from the normal 48-bits to 64 bits by having the second counter carry the higher 16 bits of the count in its lower 16 bits of its counter register. The odd counter, e.g., PERF_CTL1, is programmed with the enabled Merge event before the even counter, PERF_CTL0. The Large Increment feature is available starting with Family 17h. For more details, search any Family 17h PPR for the "Large Increment per Cycle Events" section, e.g., section 2.1.15.3 on p. 173 in this version: https://www.amd.com/system/files/TechDocs/56176_ppr_Family_17h_Model_71h_B0_pub_Rev_3.06.zip Description of software operation --------------------------------- The following steps are taken in order to support reserving and enabling the extra counter for Large Increment per Cycle events: 1. In the main x86 scheduler, we reduce the number of available counters by the number of Large Increment per Cycle events being scheduled, tracked by a new cpuc variable 'n_pair' and a new amd_put_event_constraints_f17h(). This improves the counter scheduler success rate. 2. In perf_assign_events(), if a counter is assigned to a Large Increment event, we increment the current counter variable, so the counter used for the Merge event is removed from assignment consideration by upcoming event assignments. 3. In find_counter(), if a counter has been found for the Large Increment event, we set the next counter as used, to prevent other events from using it. 4. We perform steps 2 & 3 also in the x86 scheduler fastpath, i.e., we add Merge event accounting to the existing used_mask logic. 5. Finally, we add on the programming of Merge event to the neighbouring PMC counters in the counter enable/disable{_all} code paths. Currently, software does not support a single PMU with mixed 48- and 64-bit counting, so Large increment event counts are limited to 48 bits. In set_period, we zero-out the upper 16 bits of the count, so the hardware doesn't copy them to the even counter's higher bits. Simple invocation example showing counting 8 FLOPs per 256-bit/%ymm vaddps instruction executed in a loop 100 million times: perf stat -e cpu/fp_ret_sse_avx_ops.all/,cpu/instructions/ <workload> Performance counter stats for '<workload>': 800,000,000 cpu/fp_ret_sse_avx_ops.all/u 300,042,101 cpu/instructions/u Prior to this patch, the reported SSE/AVX FLOPs retired count would be wrong. [peterz: lots of renames and edits to the code] Signed-off-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2019-11-14 18:37:20 +00:00
u64 mask = BIT_ULL(idx);
perf/x86/amd: Add support for Large Increment per Cycle Events Description of hardware operation --------------------------------- The core AMD PMU has a 4-bit wide per-cycle increment for each performance monitor counter. That works for most events, but now with AMD Family 17h and above processors, some events can occur more than 15 times in a cycle. Those events are called "Large Increment per Cycle" events. In order to count these events, two adjacent h/w PMCs get their count signals merged to form 8 bits per cycle total. In addition, the PERF_CTR count registers are merged to be able to count up to 64 bits. Normally, events like instructions retired, get programmed on a single counter like so: PERF_CTL0 (MSR 0xc0010200) 0x000000000053ff0c # event 0x0c, umask 0xff PERF_CTR0 (MSR 0xc0010201) 0x0000800000000001 # r/w 48-bit count The next counter at MSRs 0xc0010202-3 remains unused, or can be used independently to count something else. When counting Large Increment per Cycle events, such as FLOPs, however, we now have to reserve the next counter and program the PERF_CTL (config) register with the Merge event (0xFFF), like so: PERF_CTL0 (msr 0xc0010200) 0x000000000053ff03 # FLOPs event, umask 0xff PERF_CTR0 (msr 0xc0010201) 0x0000800000000001 # rd 64-bit cnt, wr lo 48b PERF_CTL1 (msr 0xc0010202) 0x0000000f004000ff # Merge event, enable bit PERF_CTR1 (msr 0xc0010203) 0x0000000000000000 # wr hi 16-bits count The count is widened from the normal 48-bits to 64 bits by having the second counter carry the higher 16 bits of the count in its lower 16 bits of its counter register. The odd counter, e.g., PERF_CTL1, is programmed with the enabled Merge event before the even counter, PERF_CTL0. The Large Increment feature is available starting with Family 17h. For more details, search any Family 17h PPR for the "Large Increment per Cycle Events" section, e.g., section 2.1.15.3 on p. 173 in this version: https://www.amd.com/system/files/TechDocs/56176_ppr_Family_17h_Model_71h_B0_pub_Rev_3.06.zip Description of software operation --------------------------------- The following steps are taken in order to support reserving and enabling the extra counter for Large Increment per Cycle events: 1. In the main x86 scheduler, we reduce the number of available counters by the number of Large Increment per Cycle events being scheduled, tracked by a new cpuc variable 'n_pair' and a new amd_put_event_constraints_f17h(). This improves the counter scheduler success rate. 2. In perf_assign_events(), if a counter is assigned to a Large Increment event, we increment the current counter variable, so the counter used for the Merge event is removed from assignment consideration by upcoming event assignments. 3. In find_counter(), if a counter has been found for the Large Increment event, we set the next counter as used, to prevent other events from using it. 4. We perform steps 2 & 3 also in the x86 scheduler fastpath, i.e., we add Merge event accounting to the existing used_mask logic. 5. Finally, we add on the programming of Merge event to the neighbouring PMC counters in the counter enable/disable{_all} code paths. Currently, software does not support a single PMU with mixed 48- and 64-bit counting, so Large increment event counts are limited to 48 bits. In set_period, we zero-out the upper 16 bits of the count, so the hardware doesn't copy them to the even counter's higher bits. Simple invocation example showing counting 8 FLOPs per 256-bit/%ymm vaddps instruction executed in a loop 100 million times: perf stat -e cpu/fp_ret_sse_avx_ops.all/,cpu/instructions/ <workload> Performance counter stats for '<workload>': 800,000,000 cpu/fp_ret_sse_avx_ops.all/u 300,042,101 cpu/instructions/u Prior to this patch, the reported SSE/AVX FLOPs retired count would be wrong. [peterz: lots of renames and edits to the code] Signed-off-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2019-11-14 18:37:20 +00:00
if (c->flags & PERF_X86_EVENT_PAIR)
mask |= mask << 1;
if (sched->state.used & mask)
continue;
if (sched->state.nr_gp++ >= sched->max_gp)
return false;
sched->state.used |= mask;
goto done;
}
return false;
done:
sched->state.counter = idx;
perf, x86: Fix event scheduler for constraints with overlapping counters The current x86 event scheduler fails to resolve scheduling problems of certain combinations of events and constraints. This happens if the counter mask of such an event is not a subset of any other counter mask of a constraint with an equal or higher weight, e.g. constraints of the AMD family 15h pmu: counter mask weight amd_f15_PMC30 0x09 2 <--- overlapping counters amd_f15_PMC20 0x07 3 amd_f15_PMC53 0x38 3 The scheduler does not find then an existing solution. Here is an example: event code counter failure possible solution 0x02E PMC[3,0] 0 3 0x043 PMC[2:0] 1 0 0x045 PMC[2:0] 2 1 0x046 PMC[2:0] FAIL 2 The event scheduler may not select the correct counter in the first cycle because it needs to know which subsequent events will be scheduled. It may fail to schedule the events then. To solve this, we now save the scheduler state of events with overlapping counter counstraints. If we fail to schedule the events we rollback to those states and try to use another free counter. Constraints with overlapping counters are marked with a new introduced overlap flag. We set the overlap flag for such constraints to give the scheduler a hint which events to select for counter rescheduling. The EVENT_CONSTRAINT_OVERLAP() macro can be used for this. Care must be taken as the rescheduling algorithm is O(n!) which will increase scheduling cycles for an over-commited system dramatically. The number of such EVENT_CONSTRAINT_OVERLAP() macros and its counter masks must be kept at a minimum. Thus, the current stack is limited to 2 states to limit the number of loops the algorithm takes in the worst case. On systems with no overlapping-counter constraints, this implementation does not increase the loop count compared to the previous algorithm. V2: * Renamed redo -> overlap. * Reimplementation using perf scheduling helper functions. V3: * Added WARN_ON_ONCE() if out of save states. * Changed function interface of perf_sched_restore_state() to use bool as return value. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1321616122-1533-3-git-send-email-robert.richter@amd.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-11-18 11:35:22 +00:00
if (c->overlap)
perf_sched_save_state(sched);
return true;
}
static bool perf_sched_find_counter(struct perf_sched *sched)
{
while (!__perf_sched_find_counter(sched)) {
if (!perf_sched_restore_state(sched))
return false;
}
return true;
}
/*
* Go through all unassigned events and find the next one to schedule.
* Take events with the least weight first. Return true on success.
*/
static bool perf_sched_next_event(struct perf_sched *sched)
{
struct event_constraint *c;
if (!sched->state.unassigned || !--sched->state.unassigned)
return false;
do {
/* next event */
sched->state.event++;
if (sched->state.event >= sched->max_events) {
/* next weight */
sched->state.event = 0;
sched->state.weight++;
if (sched->state.weight > sched->max_weight)
return false;
}
perf/x86: Fix event/group validation Commit 43b4578071c0 ("perf/x86: Reduce stack usage of x86_schedule_events()") violated the rule that 'fake' scheduling; as used for event/group validation; should not change the event state. This went mostly un-noticed because repeated calls of x86_pmu::get_event_constraints() would give the same result. And x86_pmu::put_event_constraints() would mostly not do anything. Commit e979121b1b15 ("perf/x86/intel: Implement cross-HT corruption bug workaround") made the situation much worse by actually setting the event->hw.constraint value to NULL, so when validation and actual scheduling interact we get NULL ptr derefs. Fix it by removing the constraint pointer from the event and move it back to an array, this time in cpuc instead of on the stack. validate_group() x86_schedule_events() event->hw.constraint = c; # store <context switch> perf_task_event_sched_in() ... x86_schedule_events(); event->hw.constraint = c2; # store ... put_event_constraints(event); # assume failure to schedule intel_put_event_constraints() event->hw.constraint = NULL; <context switch end> c = event->hw.constraint; # read -> NULL if (!test_bit(hwc->idx, c->idxmsk)) # <- *BOOM* NULL deref This in particular is possible when the event in question is a cpu-wide event and group-leader, where the validate_group() tries to add an event to the group. Reported-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Hunter <ahh@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 43b4578071c0 ("perf/x86: Reduce stack usage of x86_schedule_events()") Fixes: e979121b1b15 ("perf/x86/intel: Implement cross-HT corruption bug workaround") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-21 08:57:13 +00:00
c = sched->constraints[sched->state.event];
} while (c->weight != sched->state.weight);
sched->state.counter = 0; /* start with first counter */
return true;
}
/*
* Assign a counter for each event.
*/
perf/x86: Fix event/group validation Commit 43b4578071c0 ("perf/x86: Reduce stack usage of x86_schedule_events()") violated the rule that 'fake' scheduling; as used for event/group validation; should not change the event state. This went mostly un-noticed because repeated calls of x86_pmu::get_event_constraints() would give the same result. And x86_pmu::put_event_constraints() would mostly not do anything. Commit e979121b1b15 ("perf/x86/intel: Implement cross-HT corruption bug workaround") made the situation much worse by actually setting the event->hw.constraint value to NULL, so when validation and actual scheduling interact we get NULL ptr derefs. Fix it by removing the constraint pointer from the event and move it back to an array, this time in cpuc instead of on the stack. validate_group() x86_schedule_events() event->hw.constraint = c; # store <context switch> perf_task_event_sched_in() ... x86_schedule_events(); event->hw.constraint = c2; # store ... put_event_constraints(event); # assume failure to schedule intel_put_event_constraints() event->hw.constraint = NULL; <context switch end> c = event->hw.constraint; # read -> NULL if (!test_bit(hwc->idx, c->idxmsk)) # <- *BOOM* NULL deref This in particular is possible when the event in question is a cpu-wide event and group-leader, where the validate_group() tries to add an event to the group. Reported-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Hunter <ahh@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 43b4578071c0 ("perf/x86: Reduce stack usage of x86_schedule_events()") Fixes: e979121b1b15 ("perf/x86/intel: Implement cross-HT corruption bug workaround") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-21 08:57:13 +00:00
int perf_assign_events(struct event_constraint **constraints, int n,
int wmin, int wmax, int gpmax, int *assign)
{
struct perf_sched sched;
perf_sched_init(&sched, constraints, n, wmin, wmax, gpmax);
do {
if (!perf_sched_find_counter(&sched))
break; /* failed */
if (assign)
assign[sched.state.event] = sched.state.counter;
} while (perf_sched_next_event(&sched));
return sched.state.unassigned;
}
EXPORT_SYMBOL_GPL(perf_assign_events);
int x86_schedule_events(struct cpu_hw_events *cpuc, int n, int *assign)
{
struct event_constraint *c;
perf/x86: Fix shared register mutual exclusion enforcement This patch fixes a problem with the shared registers mutual exclusion code and incremental event scheduling by the generic perf_event code. There was a bug whereby the mutual exclusion on the shared registers was not enforced because of incremental scheduling abort due to event constraints. As an example on Intel Nehalem, consider the following events: group1= L1D_CACHE_LD:E_STATE,OFFCORE_RESPONSE_0:PF_RFO,L1D_CACHE_LD:I_STATE group2= L1D_CACHE_LD:I_STATE The L1D_CACHE_LD event can only be measured by 2 counters. Yet, there are 3 instances here. The first group can be scheduled and is committed. Then, the generic code tries to schedule group2 and this fails (because there is no more counter to support the 3rd instance of L1D_CACHE_LD). But in x86_schedule_events() error path, put_event_contraints() is invoked on ALL the events and not just the ones that just failed. That causes the "lock" on the shared offcore_response MSR to be released. Yet the first group is actually scheduled and is exposed to reprogramming of that shared msr by the sibling HT thread. In other words, there is no guarantee on what is measured. This patch fixes the problem by tagging committed events with the PERF_X86_EVENT_COMMITTED tag. In the error path of x86_schedule_events(), only the events NOT tagged have their constraint released. The tag is eventually removed when the event in descheduled. Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20130620164254.GA3556@quad Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-06-20 16:42:54 +00:00
struct perf_event *e;
int n0, i, wmin, wmax, unsched = 0;
struct hw_perf_event *hwc;
perf/x86/amd: Add support for Large Increment per Cycle Events Description of hardware operation --------------------------------- The core AMD PMU has a 4-bit wide per-cycle increment for each performance monitor counter. That works for most events, but now with AMD Family 17h and above processors, some events can occur more than 15 times in a cycle. Those events are called "Large Increment per Cycle" events. In order to count these events, two adjacent h/w PMCs get their count signals merged to form 8 bits per cycle total. In addition, the PERF_CTR count registers are merged to be able to count up to 64 bits. Normally, events like instructions retired, get programmed on a single counter like so: PERF_CTL0 (MSR 0xc0010200) 0x000000000053ff0c # event 0x0c, umask 0xff PERF_CTR0 (MSR 0xc0010201) 0x0000800000000001 # r/w 48-bit count The next counter at MSRs 0xc0010202-3 remains unused, or can be used independently to count something else. When counting Large Increment per Cycle events, such as FLOPs, however, we now have to reserve the next counter and program the PERF_CTL (config) register with the Merge event (0xFFF), like so: PERF_CTL0 (msr 0xc0010200) 0x000000000053ff03 # FLOPs event, umask 0xff PERF_CTR0 (msr 0xc0010201) 0x0000800000000001 # rd 64-bit cnt, wr lo 48b PERF_CTL1 (msr 0xc0010202) 0x0000000f004000ff # Merge event, enable bit PERF_CTR1 (msr 0xc0010203) 0x0000000000000000 # wr hi 16-bits count The count is widened from the normal 48-bits to 64 bits by having the second counter carry the higher 16 bits of the count in its lower 16 bits of its counter register. The odd counter, e.g., PERF_CTL1, is programmed with the enabled Merge event before the even counter, PERF_CTL0. The Large Increment feature is available starting with Family 17h. For more details, search any Family 17h PPR for the "Large Increment per Cycle Events" section, e.g., section 2.1.15.3 on p. 173 in this version: https://www.amd.com/system/files/TechDocs/56176_ppr_Family_17h_Model_71h_B0_pub_Rev_3.06.zip Description of software operation --------------------------------- The following steps are taken in order to support reserving and enabling the extra counter for Large Increment per Cycle events: 1. In the main x86 scheduler, we reduce the number of available counters by the number of Large Increment per Cycle events being scheduled, tracked by a new cpuc variable 'n_pair' and a new amd_put_event_constraints_f17h(). This improves the counter scheduler success rate. 2. In perf_assign_events(), if a counter is assigned to a Large Increment event, we increment the current counter variable, so the counter used for the Merge event is removed from assignment consideration by upcoming event assignments. 3. In find_counter(), if a counter has been found for the Large Increment event, we set the next counter as used, to prevent other events from using it. 4. We perform steps 2 & 3 also in the x86 scheduler fastpath, i.e., we add Merge event accounting to the existing used_mask logic. 5. Finally, we add on the programming of Merge event to the neighbouring PMC counters in the counter enable/disable{_all} code paths. Currently, software does not support a single PMU with mixed 48- and 64-bit counting, so Large increment event counts are limited to 48 bits. In set_period, we zero-out the upper 16 bits of the count, so the hardware doesn't copy them to the even counter's higher bits. Simple invocation example showing counting 8 FLOPs per 256-bit/%ymm vaddps instruction executed in a loop 100 million times: perf stat -e cpu/fp_ret_sse_avx_ops.all/,cpu/instructions/ <workload> Performance counter stats for '<workload>': 800,000,000 cpu/fp_ret_sse_avx_ops.all/u 300,042,101 cpu/instructions/u Prior to this patch, the reported SSE/AVX FLOPs retired count would be wrong. [peterz: lots of renames and edits to the code] Signed-off-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2019-11-14 18:37:20 +00:00
u64 used_mask = 0;
/*
* Compute the number of events already present; see x86_pmu_add(),
* validate_group() and x86_pmu_commit_txn(). For the former two
* cpuc->n_events hasn't been updated yet, while for the latter
* cpuc->n_txn contains the number of events added in the current
* transaction.
*/
n0 = cpuc->n_events;
if (cpuc->txn_flags & PERF_PMU_TXN_ADD)
n0 -= cpuc->n_txn;
if (x86_pmu.start_scheduling)
x86_pmu.start_scheduling(cpuc);
for (i = 0, wmin = X86_PMC_IDX_MAX, wmax = 0; i < n; i++) {
c = cpuc->event_constraint[i];
/*
* Previously scheduled events should have a cached constraint,
* while new events should not have one.
*/
WARN_ON_ONCE((c && i >= n0) || (!c && i < n0));
/*
* Request constraints for new events; or for those events that
* have a dynamic constraint -- for those the constraint can
* change due to external factors (sibling state, allow_tfa).
*/
if (!c || (c->flags & PERF_X86_EVENT_DYNAMIC)) {
c = x86_pmu.get_event_constraints(cpuc, i, cpuc->event_list[i]);
cpuc->event_constraint[i] = c;
}
wmin = min(wmin, c->weight);
wmax = max(wmax, c->weight);
}
/*
* fastpath, try to reuse previous register
*/
for (i = 0; i < n; i++) {
perf/x86/amd: Add support for Large Increment per Cycle Events Description of hardware operation --------------------------------- The core AMD PMU has a 4-bit wide per-cycle increment for each performance monitor counter. That works for most events, but now with AMD Family 17h and above processors, some events can occur more than 15 times in a cycle. Those events are called "Large Increment per Cycle" events. In order to count these events, two adjacent h/w PMCs get their count signals merged to form 8 bits per cycle total. In addition, the PERF_CTR count registers are merged to be able to count up to 64 bits. Normally, events like instructions retired, get programmed on a single counter like so: PERF_CTL0 (MSR 0xc0010200) 0x000000000053ff0c # event 0x0c, umask 0xff PERF_CTR0 (MSR 0xc0010201) 0x0000800000000001 # r/w 48-bit count The next counter at MSRs 0xc0010202-3 remains unused, or can be used independently to count something else. When counting Large Increment per Cycle events, such as FLOPs, however, we now have to reserve the next counter and program the PERF_CTL (config) register with the Merge event (0xFFF), like so: PERF_CTL0 (msr 0xc0010200) 0x000000000053ff03 # FLOPs event, umask 0xff PERF_CTR0 (msr 0xc0010201) 0x0000800000000001 # rd 64-bit cnt, wr lo 48b PERF_CTL1 (msr 0xc0010202) 0x0000000f004000ff # Merge event, enable bit PERF_CTR1 (msr 0xc0010203) 0x0000000000000000 # wr hi 16-bits count The count is widened from the normal 48-bits to 64 bits by having the second counter carry the higher 16 bits of the count in its lower 16 bits of its counter register. The odd counter, e.g., PERF_CTL1, is programmed with the enabled Merge event before the even counter, PERF_CTL0. The Large Increment feature is available starting with Family 17h. For more details, search any Family 17h PPR for the "Large Increment per Cycle Events" section, e.g., section 2.1.15.3 on p. 173 in this version: https://www.amd.com/system/files/TechDocs/56176_ppr_Family_17h_Model_71h_B0_pub_Rev_3.06.zip Description of software operation --------------------------------- The following steps are taken in order to support reserving and enabling the extra counter for Large Increment per Cycle events: 1. In the main x86 scheduler, we reduce the number of available counters by the number of Large Increment per Cycle events being scheduled, tracked by a new cpuc variable 'n_pair' and a new amd_put_event_constraints_f17h(). This improves the counter scheduler success rate. 2. In perf_assign_events(), if a counter is assigned to a Large Increment event, we increment the current counter variable, so the counter used for the Merge event is removed from assignment consideration by upcoming event assignments. 3. In find_counter(), if a counter has been found for the Large Increment event, we set the next counter as used, to prevent other events from using it. 4. We perform steps 2 & 3 also in the x86 scheduler fastpath, i.e., we add Merge event accounting to the existing used_mask logic. 5. Finally, we add on the programming of Merge event to the neighbouring PMC counters in the counter enable/disable{_all} code paths. Currently, software does not support a single PMU with mixed 48- and 64-bit counting, so Large increment event counts are limited to 48 bits. In set_period, we zero-out the upper 16 bits of the count, so the hardware doesn't copy them to the even counter's higher bits. Simple invocation example showing counting 8 FLOPs per 256-bit/%ymm vaddps instruction executed in a loop 100 million times: perf stat -e cpu/fp_ret_sse_avx_ops.all/,cpu/instructions/ <workload> Performance counter stats for '<workload>': 800,000,000 cpu/fp_ret_sse_avx_ops.all/u 300,042,101 cpu/instructions/u Prior to this patch, the reported SSE/AVX FLOPs retired count would be wrong. [peterz: lots of renames and edits to the code] Signed-off-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2019-11-14 18:37:20 +00:00
u64 mask;
hwc = &cpuc->event_list[i]->hw;
perf/x86: Fix event/group validation Commit 43b4578071c0 ("perf/x86: Reduce stack usage of x86_schedule_events()") violated the rule that 'fake' scheduling; as used for event/group validation; should not change the event state. This went mostly un-noticed because repeated calls of x86_pmu::get_event_constraints() would give the same result. And x86_pmu::put_event_constraints() would mostly not do anything. Commit e979121b1b15 ("perf/x86/intel: Implement cross-HT corruption bug workaround") made the situation much worse by actually setting the event->hw.constraint value to NULL, so when validation and actual scheduling interact we get NULL ptr derefs. Fix it by removing the constraint pointer from the event and move it back to an array, this time in cpuc instead of on the stack. validate_group() x86_schedule_events() event->hw.constraint = c; # store <context switch> perf_task_event_sched_in() ... x86_schedule_events(); event->hw.constraint = c2; # store ... put_event_constraints(event); # assume failure to schedule intel_put_event_constraints() event->hw.constraint = NULL; <context switch end> c = event->hw.constraint; # read -> NULL if (!test_bit(hwc->idx, c->idxmsk)) # <- *BOOM* NULL deref This in particular is possible when the event in question is a cpu-wide event and group-leader, where the validate_group() tries to add an event to the group. Reported-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Hunter <ahh@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 43b4578071c0 ("perf/x86: Reduce stack usage of x86_schedule_events()") Fixes: e979121b1b15 ("perf/x86/intel: Implement cross-HT corruption bug workaround") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-21 08:57:13 +00:00
c = cpuc->event_constraint[i];
/* never assigned */
if (hwc->idx == -1)
break;
/* constraint still honored */
if (!test_bit(hwc->idx, c->idxmsk))
break;
perf/x86/amd: Add support for Large Increment per Cycle Events Description of hardware operation --------------------------------- The core AMD PMU has a 4-bit wide per-cycle increment for each performance monitor counter. That works for most events, but now with AMD Family 17h and above processors, some events can occur more than 15 times in a cycle. Those events are called "Large Increment per Cycle" events. In order to count these events, two adjacent h/w PMCs get their count signals merged to form 8 bits per cycle total. In addition, the PERF_CTR count registers are merged to be able to count up to 64 bits. Normally, events like instructions retired, get programmed on a single counter like so: PERF_CTL0 (MSR 0xc0010200) 0x000000000053ff0c # event 0x0c, umask 0xff PERF_CTR0 (MSR 0xc0010201) 0x0000800000000001 # r/w 48-bit count The next counter at MSRs 0xc0010202-3 remains unused, or can be used independently to count something else. When counting Large Increment per Cycle events, such as FLOPs, however, we now have to reserve the next counter and program the PERF_CTL (config) register with the Merge event (0xFFF), like so: PERF_CTL0 (msr 0xc0010200) 0x000000000053ff03 # FLOPs event, umask 0xff PERF_CTR0 (msr 0xc0010201) 0x0000800000000001 # rd 64-bit cnt, wr lo 48b PERF_CTL1 (msr 0xc0010202) 0x0000000f004000ff # Merge event, enable bit PERF_CTR1 (msr 0xc0010203) 0x0000000000000000 # wr hi 16-bits count The count is widened from the normal 48-bits to 64 bits by having the second counter carry the higher 16 bits of the count in its lower 16 bits of its counter register. The odd counter, e.g., PERF_CTL1, is programmed with the enabled Merge event before the even counter, PERF_CTL0. The Large Increment feature is available starting with Family 17h. For more details, search any Family 17h PPR for the "Large Increment per Cycle Events" section, e.g., section 2.1.15.3 on p. 173 in this version: https://www.amd.com/system/files/TechDocs/56176_ppr_Family_17h_Model_71h_B0_pub_Rev_3.06.zip Description of software operation --------------------------------- The following steps are taken in order to support reserving and enabling the extra counter for Large Increment per Cycle events: 1. In the main x86 scheduler, we reduce the number of available counters by the number of Large Increment per Cycle events being scheduled, tracked by a new cpuc variable 'n_pair' and a new amd_put_event_constraints_f17h(). This improves the counter scheduler success rate. 2. In perf_assign_events(), if a counter is assigned to a Large Increment event, we increment the current counter variable, so the counter used for the Merge event is removed from assignment consideration by upcoming event assignments. 3. In find_counter(), if a counter has been found for the Large Increment event, we set the next counter as used, to prevent other events from using it. 4. We perform steps 2 & 3 also in the x86 scheduler fastpath, i.e., we add Merge event accounting to the existing used_mask logic. 5. Finally, we add on the programming of Merge event to the neighbouring PMC counters in the counter enable/disable{_all} code paths. Currently, software does not support a single PMU with mixed 48- and 64-bit counting, so Large increment event counts are limited to 48 bits. In set_period, we zero-out the upper 16 bits of the count, so the hardware doesn't copy them to the even counter's higher bits. Simple invocation example showing counting 8 FLOPs per 256-bit/%ymm vaddps instruction executed in a loop 100 million times: perf stat -e cpu/fp_ret_sse_avx_ops.all/,cpu/instructions/ <workload> Performance counter stats for '<workload>': 800,000,000 cpu/fp_ret_sse_avx_ops.all/u 300,042,101 cpu/instructions/u Prior to this patch, the reported SSE/AVX FLOPs retired count would be wrong. [peterz: lots of renames and edits to the code] Signed-off-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2019-11-14 18:37:20 +00:00
mask = BIT_ULL(hwc->idx);
if (is_counter_pair(hwc))
mask |= mask << 1;
/* not already used */
perf/x86/amd: Add support for Large Increment per Cycle Events Description of hardware operation --------------------------------- The core AMD PMU has a 4-bit wide per-cycle increment for each performance monitor counter. That works for most events, but now with AMD Family 17h and above processors, some events can occur more than 15 times in a cycle. Those events are called "Large Increment per Cycle" events. In order to count these events, two adjacent h/w PMCs get their count signals merged to form 8 bits per cycle total. In addition, the PERF_CTR count registers are merged to be able to count up to 64 bits. Normally, events like instructions retired, get programmed on a single counter like so: PERF_CTL0 (MSR 0xc0010200) 0x000000000053ff0c # event 0x0c, umask 0xff PERF_CTR0 (MSR 0xc0010201) 0x0000800000000001 # r/w 48-bit count The next counter at MSRs 0xc0010202-3 remains unused, or can be used independently to count something else. When counting Large Increment per Cycle events, such as FLOPs, however, we now have to reserve the next counter and program the PERF_CTL (config) register with the Merge event (0xFFF), like so: PERF_CTL0 (msr 0xc0010200) 0x000000000053ff03 # FLOPs event, umask 0xff PERF_CTR0 (msr 0xc0010201) 0x0000800000000001 # rd 64-bit cnt, wr lo 48b PERF_CTL1 (msr 0xc0010202) 0x0000000f004000ff # Merge event, enable bit PERF_CTR1 (msr 0xc0010203) 0x0000000000000000 # wr hi 16-bits count The count is widened from the normal 48-bits to 64 bits by having the second counter carry the higher 16 bits of the count in its lower 16 bits of its counter register. The odd counter, e.g., PERF_CTL1, is programmed with the enabled Merge event before the even counter, PERF_CTL0. The Large Increment feature is available starting with Family 17h. For more details, search any Family 17h PPR for the "Large Increment per Cycle Events" section, e.g., section 2.1.15.3 on p. 173 in this version: https://www.amd.com/system/files/TechDocs/56176_ppr_Family_17h_Model_71h_B0_pub_Rev_3.06.zip Description of software operation --------------------------------- The following steps are taken in order to support reserving and enabling the extra counter for Large Increment per Cycle events: 1. In the main x86 scheduler, we reduce the number of available counters by the number of Large Increment per Cycle events being scheduled, tracked by a new cpuc variable 'n_pair' and a new amd_put_event_constraints_f17h(). This improves the counter scheduler success rate. 2. In perf_assign_events(), if a counter is assigned to a Large Increment event, we increment the current counter variable, so the counter used for the Merge event is removed from assignment consideration by upcoming event assignments. 3. In find_counter(), if a counter has been found for the Large Increment event, we set the next counter as used, to prevent other events from using it. 4. We perform steps 2 & 3 also in the x86 scheduler fastpath, i.e., we add Merge event accounting to the existing used_mask logic. 5. Finally, we add on the programming of Merge event to the neighbouring PMC counters in the counter enable/disable{_all} code paths. Currently, software does not support a single PMU with mixed 48- and 64-bit counting, so Large increment event counts are limited to 48 bits. In set_period, we zero-out the upper 16 bits of the count, so the hardware doesn't copy them to the even counter's higher bits. Simple invocation example showing counting 8 FLOPs per 256-bit/%ymm vaddps instruction executed in a loop 100 million times: perf stat -e cpu/fp_ret_sse_avx_ops.all/,cpu/instructions/ <workload> Performance counter stats for '<workload>': 800,000,000 cpu/fp_ret_sse_avx_ops.all/u 300,042,101 cpu/instructions/u Prior to this patch, the reported SSE/AVX FLOPs retired count would be wrong. [peterz: lots of renames and edits to the code] Signed-off-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2019-11-14 18:37:20 +00:00
if (used_mask & mask)
break;
perf/x86/amd: Add support for Large Increment per Cycle Events Description of hardware operation --------------------------------- The core AMD PMU has a 4-bit wide per-cycle increment for each performance monitor counter. That works for most events, but now with AMD Family 17h and above processors, some events can occur more than 15 times in a cycle. Those events are called "Large Increment per Cycle" events. In order to count these events, two adjacent h/w PMCs get their count signals merged to form 8 bits per cycle total. In addition, the PERF_CTR count registers are merged to be able to count up to 64 bits. Normally, events like instructions retired, get programmed on a single counter like so: PERF_CTL0 (MSR 0xc0010200) 0x000000000053ff0c # event 0x0c, umask 0xff PERF_CTR0 (MSR 0xc0010201) 0x0000800000000001 # r/w 48-bit count The next counter at MSRs 0xc0010202-3 remains unused, or can be used independently to count something else. When counting Large Increment per Cycle events, such as FLOPs, however, we now have to reserve the next counter and program the PERF_CTL (config) register with the Merge event (0xFFF), like so: PERF_CTL0 (msr 0xc0010200) 0x000000000053ff03 # FLOPs event, umask 0xff PERF_CTR0 (msr 0xc0010201) 0x0000800000000001 # rd 64-bit cnt, wr lo 48b PERF_CTL1 (msr 0xc0010202) 0x0000000f004000ff # Merge event, enable bit PERF_CTR1 (msr 0xc0010203) 0x0000000000000000 # wr hi 16-bits count The count is widened from the normal 48-bits to 64 bits by having the second counter carry the higher 16 bits of the count in its lower 16 bits of its counter register. The odd counter, e.g., PERF_CTL1, is programmed with the enabled Merge event before the even counter, PERF_CTL0. The Large Increment feature is available starting with Family 17h. For more details, search any Family 17h PPR for the "Large Increment per Cycle Events" section, e.g., section 2.1.15.3 on p. 173 in this version: https://www.amd.com/system/files/TechDocs/56176_ppr_Family_17h_Model_71h_B0_pub_Rev_3.06.zip Description of software operation --------------------------------- The following steps are taken in order to support reserving and enabling the extra counter for Large Increment per Cycle events: 1. In the main x86 scheduler, we reduce the number of available counters by the number of Large Increment per Cycle events being scheduled, tracked by a new cpuc variable 'n_pair' and a new amd_put_event_constraints_f17h(). This improves the counter scheduler success rate. 2. In perf_assign_events(), if a counter is assigned to a Large Increment event, we increment the current counter variable, so the counter used for the Merge event is removed from assignment consideration by upcoming event assignments. 3. In find_counter(), if a counter has been found for the Large Increment event, we set the next counter as used, to prevent other events from using it. 4. We perform steps 2 & 3 also in the x86 scheduler fastpath, i.e., we add Merge event accounting to the existing used_mask logic. 5. Finally, we add on the programming of Merge event to the neighbouring PMC counters in the counter enable/disable{_all} code paths. Currently, software does not support a single PMU with mixed 48- and 64-bit counting, so Large increment event counts are limited to 48 bits. In set_period, we zero-out the upper 16 bits of the count, so the hardware doesn't copy them to the even counter's higher bits. Simple invocation example showing counting 8 FLOPs per 256-bit/%ymm vaddps instruction executed in a loop 100 million times: perf stat -e cpu/fp_ret_sse_avx_ops.all/,cpu/instructions/ <workload> Performance counter stats for '<workload>': 800,000,000 cpu/fp_ret_sse_avx_ops.all/u 300,042,101 cpu/instructions/u Prior to this patch, the reported SSE/AVX FLOPs retired count would be wrong. [peterz: lots of renames and edits to the code] Signed-off-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2019-11-14 18:37:20 +00:00
used_mask |= mask;
if (assign)
assign[i] = hwc->idx;
}
/* slow path */
perf/x86: Fix event/group validation Commit 43b4578071c0 ("perf/x86: Reduce stack usage of x86_schedule_events()") violated the rule that 'fake' scheduling; as used for event/group validation; should not change the event state. This went mostly un-noticed because repeated calls of x86_pmu::get_event_constraints() would give the same result. And x86_pmu::put_event_constraints() would mostly not do anything. Commit e979121b1b15 ("perf/x86/intel: Implement cross-HT corruption bug workaround") made the situation much worse by actually setting the event->hw.constraint value to NULL, so when validation and actual scheduling interact we get NULL ptr derefs. Fix it by removing the constraint pointer from the event and move it back to an array, this time in cpuc instead of on the stack. validate_group() x86_schedule_events() event->hw.constraint = c; # store <context switch> perf_task_event_sched_in() ... x86_schedule_events(); event->hw.constraint = c2; # store ... put_event_constraints(event); # assume failure to schedule intel_put_event_constraints() event->hw.constraint = NULL; <context switch end> c = event->hw.constraint; # read -> NULL if (!test_bit(hwc->idx, c->idxmsk)) # <- *BOOM* NULL deref This in particular is possible when the event in question is a cpu-wide event and group-leader, where the validate_group() tries to add an event to the group. Reported-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Hunter <ahh@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 43b4578071c0 ("perf/x86: Reduce stack usage of x86_schedule_events()") Fixes: e979121b1b15 ("perf/x86/intel: Implement cross-HT corruption bug workaround") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-21 08:57:13 +00:00
if (i != n) {
int gpmax = x86_pmu.num_counters;
/*
* Do not allow scheduling of more than half the available
* generic counters.
*
* This helps avoid counter starvation of sibling thread by
* ensuring at most half the counters cannot be in exclusive
* mode. There is no designated counters for the limits. Any
* N/2 counters can be used. This helps with events with
* specific counter constraints.
*/
if (is_ht_workaround_enabled() && !cpuc->is_fake &&
READ_ONCE(cpuc->excl_cntrs->exclusive_present))
gpmax /= 2;
perf/x86/amd: Add support for Large Increment per Cycle Events Description of hardware operation --------------------------------- The core AMD PMU has a 4-bit wide per-cycle increment for each performance monitor counter. That works for most events, but now with AMD Family 17h and above processors, some events can occur more than 15 times in a cycle. Those events are called "Large Increment per Cycle" events. In order to count these events, two adjacent h/w PMCs get their count signals merged to form 8 bits per cycle total. In addition, the PERF_CTR count registers are merged to be able to count up to 64 bits. Normally, events like instructions retired, get programmed on a single counter like so: PERF_CTL0 (MSR 0xc0010200) 0x000000000053ff0c # event 0x0c, umask 0xff PERF_CTR0 (MSR 0xc0010201) 0x0000800000000001 # r/w 48-bit count The next counter at MSRs 0xc0010202-3 remains unused, or can be used independently to count something else. When counting Large Increment per Cycle events, such as FLOPs, however, we now have to reserve the next counter and program the PERF_CTL (config) register with the Merge event (0xFFF), like so: PERF_CTL0 (msr 0xc0010200) 0x000000000053ff03 # FLOPs event, umask 0xff PERF_CTR0 (msr 0xc0010201) 0x0000800000000001 # rd 64-bit cnt, wr lo 48b PERF_CTL1 (msr 0xc0010202) 0x0000000f004000ff # Merge event, enable bit PERF_CTR1 (msr 0xc0010203) 0x0000000000000000 # wr hi 16-bits count The count is widened from the normal 48-bits to 64 bits by having the second counter carry the higher 16 bits of the count in its lower 16 bits of its counter register. The odd counter, e.g., PERF_CTL1, is programmed with the enabled Merge event before the even counter, PERF_CTL0. The Large Increment feature is available starting with Family 17h. For more details, search any Family 17h PPR for the "Large Increment per Cycle Events" section, e.g., section 2.1.15.3 on p. 173 in this version: https://www.amd.com/system/files/TechDocs/56176_ppr_Family_17h_Model_71h_B0_pub_Rev_3.06.zip Description of software operation --------------------------------- The following steps are taken in order to support reserving and enabling the extra counter for Large Increment per Cycle events: 1. In the main x86 scheduler, we reduce the number of available counters by the number of Large Increment per Cycle events being scheduled, tracked by a new cpuc variable 'n_pair' and a new amd_put_event_constraints_f17h(). This improves the counter scheduler success rate. 2. In perf_assign_events(), if a counter is assigned to a Large Increment event, we increment the current counter variable, so the counter used for the Merge event is removed from assignment consideration by upcoming event assignments. 3. In find_counter(), if a counter has been found for the Large Increment event, we set the next counter as used, to prevent other events from using it. 4. We perform steps 2 & 3 also in the x86 scheduler fastpath, i.e., we add Merge event accounting to the existing used_mask logic. 5. Finally, we add on the programming of Merge event to the neighbouring PMC counters in the counter enable/disable{_all} code paths. Currently, software does not support a single PMU with mixed 48- and 64-bit counting, so Large increment event counts are limited to 48 bits. In set_period, we zero-out the upper 16 bits of the count, so the hardware doesn't copy them to the even counter's higher bits. Simple invocation example showing counting 8 FLOPs per 256-bit/%ymm vaddps instruction executed in a loop 100 million times: perf stat -e cpu/fp_ret_sse_avx_ops.all/,cpu/instructions/ <workload> Performance counter stats for '<workload>': 800,000,000 cpu/fp_ret_sse_avx_ops.all/u 300,042,101 cpu/instructions/u Prior to this patch, the reported SSE/AVX FLOPs retired count would be wrong. [peterz: lots of renames and edits to the code] Signed-off-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2019-11-14 18:37:20 +00:00
/*
* Reduce the amount of available counters to allow fitting
* the extra Merge events needed by large increment events.
*/
if (x86_pmu.flags & PMU_FL_PAIR) {
gpmax = x86_pmu.num_counters - cpuc->n_pair;
WARN_ON(gpmax <= 0);
}
perf/x86: Fix event/group validation Commit 43b4578071c0 ("perf/x86: Reduce stack usage of x86_schedule_events()") violated the rule that 'fake' scheduling; as used for event/group validation; should not change the event state. This went mostly un-noticed because repeated calls of x86_pmu::get_event_constraints() would give the same result. And x86_pmu::put_event_constraints() would mostly not do anything. Commit e979121b1b15 ("perf/x86/intel: Implement cross-HT corruption bug workaround") made the situation much worse by actually setting the event->hw.constraint value to NULL, so when validation and actual scheduling interact we get NULL ptr derefs. Fix it by removing the constraint pointer from the event and move it back to an array, this time in cpuc instead of on the stack. validate_group() x86_schedule_events() event->hw.constraint = c; # store <context switch> perf_task_event_sched_in() ... x86_schedule_events(); event->hw.constraint = c2; # store ... put_event_constraints(event); # assume failure to schedule intel_put_event_constraints() event->hw.constraint = NULL; <context switch end> c = event->hw.constraint; # read -> NULL if (!test_bit(hwc->idx, c->idxmsk)) # <- *BOOM* NULL deref This in particular is possible when the event in question is a cpu-wide event and group-leader, where the validate_group() tries to add an event to the group. Reported-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Hunter <ahh@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 43b4578071c0 ("perf/x86: Reduce stack usage of x86_schedule_events()") Fixes: e979121b1b15 ("perf/x86/intel: Implement cross-HT corruption bug workaround") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-21 08:57:13 +00:00
unsched = perf_assign_events(cpuc->event_constraint, n, wmin,
wmax, gpmax, assign);
perf/x86: Fix event/group validation Commit 43b4578071c0 ("perf/x86: Reduce stack usage of x86_schedule_events()") violated the rule that 'fake' scheduling; as used for event/group validation; should not change the event state. This went mostly un-noticed because repeated calls of x86_pmu::get_event_constraints() would give the same result. And x86_pmu::put_event_constraints() would mostly not do anything. Commit e979121b1b15 ("perf/x86/intel: Implement cross-HT corruption bug workaround") made the situation much worse by actually setting the event->hw.constraint value to NULL, so when validation and actual scheduling interact we get NULL ptr derefs. Fix it by removing the constraint pointer from the event and move it back to an array, this time in cpuc instead of on the stack. validate_group() x86_schedule_events() event->hw.constraint = c; # store <context switch> perf_task_event_sched_in() ... x86_schedule_events(); event->hw.constraint = c2; # store ... put_event_constraints(event); # assume failure to schedule intel_put_event_constraints() event->hw.constraint = NULL; <context switch end> c = event->hw.constraint; # read -> NULL if (!test_bit(hwc->idx, c->idxmsk)) # <- *BOOM* NULL deref This in particular is possible when the event in question is a cpu-wide event and group-leader, where the validate_group() tries to add an event to the group. Reported-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Hunter <ahh@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 43b4578071c0 ("perf/x86: Reduce stack usage of x86_schedule_events()") Fixes: e979121b1b15 ("perf/x86/intel: Implement cross-HT corruption bug workaround") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-21 08:57:13 +00:00
}
perf/x86: Fix shared register mutual exclusion enforcement This patch fixes a problem with the shared registers mutual exclusion code and incremental event scheduling by the generic perf_event code. There was a bug whereby the mutual exclusion on the shared registers was not enforced because of incremental scheduling abort due to event constraints. As an example on Intel Nehalem, consider the following events: group1= L1D_CACHE_LD:E_STATE,OFFCORE_RESPONSE_0:PF_RFO,L1D_CACHE_LD:I_STATE group2= L1D_CACHE_LD:I_STATE The L1D_CACHE_LD event can only be measured by 2 counters. Yet, there are 3 instances here. The first group can be scheduled and is committed. Then, the generic code tries to schedule group2 and this fails (because there is no more counter to support the 3rd instance of L1D_CACHE_LD). But in x86_schedule_events() error path, put_event_contraints() is invoked on ALL the events and not just the ones that just failed. That causes the "lock" on the shared offcore_response MSR to be released. Yet the first group is actually scheduled and is exposed to reprogramming of that shared msr by the sibling HT thread. In other words, there is no guarantee on what is measured. This patch fixes the problem by tagging committed events with the PERF_X86_EVENT_COMMITTED tag. In the error path of x86_schedule_events(), only the events NOT tagged have their constraint released. The tag is eventually removed when the event in descheduled. Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20130620164254.GA3556@quad Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-06-20 16:42:54 +00:00
/*
perf/x86/intel: Implement cross-HT corruption bug workaround This patch implements a software workaround for a HW erratum on Intel SandyBridge, IvyBridge and Haswell processors with Hyperthreading enabled. The errata are documented for each processor in their respective specification update documents: - SandyBridge: BJ122 - IvyBridge: BV98 - Haswell: HSD29 The bug causes silent counter corruption across hyperthreads only when measuring certain memory events (0xd0, 0xd1, 0xd2, 0xd3). Counters measuring those events may leak counts to the sibling counter. For instance, counter 0, thread 0 measuring event 0xd0, may leak to counter 0, thread 1, regardless of the event measured there. The size of the leak is not predictible. It all depends on the workload and the state of each sibling hyper-thread. The corrupting events do undercount as a consequence of the leak. The leak is compensated automatically only when the sibling counter measures the exact same corrupting event AND the workload is on the two threads is the same. Given, there is no way to guarantee this, a work-around is necessary. Furthermore, there is a serious problem if the leaked count is added to a low-occurrence event. In that case the corruption on the low occurrence event can be very large, e.g., orders of magnitude. There is no HW or FW workaround for this problem. The bug is very easy to reproduce on a loaded system. Here is an example on a Haswell client, where CPU0, CPU4 are siblings. We load the CPUs with a simple triad app streaming large floating-point vector. We use 0x81d0 corrupting event (MEM_UOPS_RETIRED:ALL_LOADS) and 0x20cc (ROB_MISC_EVENTS:LBR_INSERTS). Given we are not using the LBR, the 0x20cc event should be zero. $ taskset -c 0 triad & $ taskset -c 4 triad & $ perf stat -a -C 0 -e r81d0 sleep 100 & $ perf stat -a -C 4 -r20cc sleep 10 Performance counter stats for 'system wide': 139 277 291 r20cc 10,000969126 seconds time elapsed In this example, 0x81d0 and r20cc ar eusing sinling counters on CPU0 and CPU4. 0x81d0 leaks into 0x20cc and corrupts it from 0 to 139 millions occurrences. This patch provides a software workaround to this problem by modifying the way events are scheduled onto counters by the kernel. The patch forces cross-thread mutual exclusion between counters in case a corrupting event is measured by one of the hyper-threads. If thread 0, counter 0 is measuring event 0xd0, then nothing can be measured on counter 0, thread 1. If no corrupting event is measured on any hyper-thread, event scheduling proceeds as before. The same example run with the workaround enabled, yield the correct answer: $ taskset -c 0 triad & $ taskset -c 4 triad & $ perf stat -a -C 0 -e r81d0 sleep 100 & $ perf stat -a -C 4 -r20cc sleep 10 Performance counter stats for 'system wide': 0 r20cc 10,000969126 seconds time elapsed The patch does provide correctness for all non-corrupting events. It does not "repatriate" the leaked counts back to the leaking counter. This is planned for a second patch series. This patch series makes this repatriation more easy by guaranteeing the sibling counter is not measuring any useful event. The patch introduces dynamic constraints for events. That means that events which did not have constraints, i.e., could be measured on any counters, may now be constrained to a subset of the counters depending on what is going on the sibling thread. The algorithm is similar to a cache coherency protocol. We call it XSU in reference to Exclusive, Shared, Unused, the 3 possible states of a PMU counter. As a consequence of the workaround, users may see an increased amount of event multiplexing, even in situtations where there are fewer events than counters measured on a CPU. Patch has been tested on all three impacted processors. Note that when HT is off, there is no corruption. However, the workaround is still enabled, yet not costing too much. Adding a dynamic detection of HT on turned out to be complex are requiring too much to code to be justified. This patch addresses the issue when PEBS is not used. A subsequent patch fixes the problem when PEBS is used. Signed-off-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> [spinlock_t -> raw_spinlock_t] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Stephane Eranian <eranian@google.com> Cc: bp@alien8.de Cc: jolsa@redhat.com Cc: kan.liang@intel.com Link: http://lkml.kernel.org/r/1416251225-17721-7-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-11-17 19:06:58 +00:00
* In case of success (unsched = 0), mark events as committed,
* so we do not put_constraint() in case new events are added
* and fail to be scheduled
*
* We invoke the lower level commit callback to lock the resource
*
* We do not need to do all of this in case we are called to
* validate an event group (assign == NULL)
perf/x86: Fix shared register mutual exclusion enforcement This patch fixes a problem with the shared registers mutual exclusion code and incremental event scheduling by the generic perf_event code. There was a bug whereby the mutual exclusion on the shared registers was not enforced because of incremental scheduling abort due to event constraints. As an example on Intel Nehalem, consider the following events: group1= L1D_CACHE_LD:E_STATE,OFFCORE_RESPONSE_0:PF_RFO,L1D_CACHE_LD:I_STATE group2= L1D_CACHE_LD:I_STATE The L1D_CACHE_LD event can only be measured by 2 counters. Yet, there are 3 instances here. The first group can be scheduled and is committed. Then, the generic code tries to schedule group2 and this fails (because there is no more counter to support the 3rd instance of L1D_CACHE_LD). But in x86_schedule_events() error path, put_event_contraints() is invoked on ALL the events and not just the ones that just failed. That causes the "lock" on the shared offcore_response MSR to be released. Yet the first group is actually scheduled and is exposed to reprogramming of that shared msr by the sibling HT thread. In other words, there is no guarantee on what is measured. This patch fixes the problem by tagging committed events with the PERF_X86_EVENT_COMMITTED tag. In the error path of x86_schedule_events(), only the events NOT tagged have their constraint released. The tag is eventually removed when the event in descheduled. Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20130620164254.GA3556@quad Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-06-20 16:42:54 +00:00
*/
perf/x86/intel: Implement cross-HT corruption bug workaround This patch implements a software workaround for a HW erratum on Intel SandyBridge, IvyBridge and Haswell processors with Hyperthreading enabled. The errata are documented for each processor in their respective specification update documents: - SandyBridge: BJ122 - IvyBridge: BV98 - Haswell: HSD29 The bug causes silent counter corruption across hyperthreads only when measuring certain memory events (0xd0, 0xd1, 0xd2, 0xd3). Counters measuring those events may leak counts to the sibling counter. For instance, counter 0, thread 0 measuring event 0xd0, may leak to counter 0, thread 1, regardless of the event measured there. The size of the leak is not predictible. It all depends on the workload and the state of each sibling hyper-thread. The corrupting events do undercount as a consequence of the leak. The leak is compensated automatically only when the sibling counter measures the exact same corrupting event AND the workload is on the two threads is the same. Given, there is no way to guarantee this, a work-around is necessary. Furthermore, there is a serious problem if the leaked count is added to a low-occurrence event. In that case the corruption on the low occurrence event can be very large, e.g., orders of magnitude. There is no HW or FW workaround for this problem. The bug is very easy to reproduce on a loaded system. Here is an example on a Haswell client, where CPU0, CPU4 are siblings. We load the CPUs with a simple triad app streaming large floating-point vector. We use 0x81d0 corrupting event (MEM_UOPS_RETIRED:ALL_LOADS) and 0x20cc (ROB_MISC_EVENTS:LBR_INSERTS). Given we are not using the LBR, the 0x20cc event should be zero. $ taskset -c 0 triad & $ taskset -c 4 triad & $ perf stat -a -C 0 -e r81d0 sleep 100 & $ perf stat -a -C 4 -r20cc sleep 10 Performance counter stats for 'system wide': 139 277 291 r20cc 10,000969126 seconds time elapsed In this example, 0x81d0 and r20cc ar eusing sinling counters on CPU0 and CPU4. 0x81d0 leaks into 0x20cc and corrupts it from 0 to 139 millions occurrences. This patch provides a software workaround to this problem by modifying the way events are scheduled onto counters by the kernel. The patch forces cross-thread mutual exclusion between counters in case a corrupting event is measured by one of the hyper-threads. If thread 0, counter 0 is measuring event 0xd0, then nothing can be measured on counter 0, thread 1. If no corrupting event is measured on any hyper-thread, event scheduling proceeds as before. The same example run with the workaround enabled, yield the correct answer: $ taskset -c 0 triad & $ taskset -c 4 triad & $ perf stat -a -C 0 -e r81d0 sleep 100 & $ perf stat -a -C 4 -r20cc sleep 10 Performance counter stats for 'system wide': 0 r20cc 10,000969126 seconds time elapsed The patch does provide correctness for all non-corrupting events. It does not "repatriate" the leaked counts back to the leaking counter. This is planned for a second patch series. This patch series makes this repatriation more easy by guaranteeing the sibling counter is not measuring any useful event. The patch introduces dynamic constraints for events. That means that events which did not have constraints, i.e., could be measured on any counters, may now be constrained to a subset of the counters depending on what is going on the sibling thread. The algorithm is similar to a cache coherency protocol. We call it XSU in reference to Exclusive, Shared, Unused, the 3 possible states of a PMU counter. As a consequence of the workaround, users may see an increased amount of event multiplexing, even in situtations where there are fewer events than counters measured on a CPU. Patch has been tested on all three impacted processors. Note that when HT is off, there is no corruption. However, the workaround is still enabled, yet not costing too much. Adding a dynamic detection of HT on turned out to be complex are requiring too much to code to be justified. This patch addresses the issue when PEBS is not used. A subsequent patch fixes the problem when PEBS is used. Signed-off-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> [spinlock_t -> raw_spinlock_t] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Stephane Eranian <eranian@google.com> Cc: bp@alien8.de Cc: jolsa@redhat.com Cc: kan.liang@intel.com Link: http://lkml.kernel.org/r/1416251225-17721-7-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-11-17 19:06:58 +00:00
if (!unsched && assign) {
perf/x86: Fix shared register mutual exclusion enforcement This patch fixes a problem with the shared registers mutual exclusion code and incremental event scheduling by the generic perf_event code. There was a bug whereby the mutual exclusion on the shared registers was not enforced because of incremental scheduling abort due to event constraints. As an example on Intel Nehalem, consider the following events: group1= L1D_CACHE_LD:E_STATE,OFFCORE_RESPONSE_0:PF_RFO,L1D_CACHE_LD:I_STATE group2= L1D_CACHE_LD:I_STATE The L1D_CACHE_LD event can only be measured by 2 counters. Yet, there are 3 instances here. The first group can be scheduled and is committed. Then, the generic code tries to schedule group2 and this fails (because there is no more counter to support the 3rd instance of L1D_CACHE_LD). But in x86_schedule_events() error path, put_event_contraints() is invoked on ALL the events and not just the ones that just failed. That causes the "lock" on the shared offcore_response MSR to be released. Yet the first group is actually scheduled and is exposed to reprogramming of that shared msr by the sibling HT thread. In other words, there is no guarantee on what is measured. This patch fixes the problem by tagging committed events with the PERF_X86_EVENT_COMMITTED tag. In the error path of x86_schedule_events(), only the events NOT tagged have their constraint released. The tag is eventually removed when the event in descheduled. Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20130620164254.GA3556@quad Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-06-20 16:42:54 +00:00
for (i = 0; i < n; i++) {
e = cpuc->event_list[i];
if (x86_pmu.commit_scheduling)
perf/x86: Fix event/group validation Commit 43b4578071c0 ("perf/x86: Reduce stack usage of x86_schedule_events()") violated the rule that 'fake' scheduling; as used for event/group validation; should not change the event state. This went mostly un-noticed because repeated calls of x86_pmu::get_event_constraints() would give the same result. And x86_pmu::put_event_constraints() would mostly not do anything. Commit e979121b1b15 ("perf/x86/intel: Implement cross-HT corruption bug workaround") made the situation much worse by actually setting the event->hw.constraint value to NULL, so when validation and actual scheduling interact we get NULL ptr derefs. Fix it by removing the constraint pointer from the event and move it back to an array, this time in cpuc instead of on the stack. validate_group() x86_schedule_events() event->hw.constraint = c; # store <context switch> perf_task_event_sched_in() ... x86_schedule_events(); event->hw.constraint = c2; # store ... put_event_constraints(event); # assume failure to schedule intel_put_event_constraints() event->hw.constraint = NULL; <context switch end> c = event->hw.constraint; # read -> NULL if (!test_bit(hwc->idx, c->idxmsk)) # <- *BOOM* NULL deref This in particular is possible when the event in question is a cpu-wide event and group-leader, where the validate_group() tries to add an event to the group. Reported-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Hunter <ahh@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 43b4578071c0 ("perf/x86: Reduce stack usage of x86_schedule_events()") Fixes: e979121b1b15 ("perf/x86/intel: Implement cross-HT corruption bug workaround") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-21 08:57:13 +00:00
x86_pmu.commit_scheduling(cpuc, i, assign[i]);
perf/x86: Fix shared register mutual exclusion enforcement This patch fixes a problem with the shared registers mutual exclusion code and incremental event scheduling by the generic perf_event code. There was a bug whereby the mutual exclusion on the shared registers was not enforced because of incremental scheduling abort due to event constraints. As an example on Intel Nehalem, consider the following events: group1= L1D_CACHE_LD:E_STATE,OFFCORE_RESPONSE_0:PF_RFO,L1D_CACHE_LD:I_STATE group2= L1D_CACHE_LD:I_STATE The L1D_CACHE_LD event can only be measured by 2 counters. Yet, there are 3 instances here. The first group can be scheduled and is committed. Then, the generic code tries to schedule group2 and this fails (because there is no more counter to support the 3rd instance of L1D_CACHE_LD). But in x86_schedule_events() error path, put_event_contraints() is invoked on ALL the events and not just the ones that just failed. That causes the "lock" on the shared offcore_response MSR to be released. Yet the first group is actually scheduled and is exposed to reprogramming of that shared msr by the sibling HT thread. In other words, there is no guarantee on what is measured. This patch fixes the problem by tagging committed events with the PERF_X86_EVENT_COMMITTED tag. In the error path of x86_schedule_events(), only the events NOT tagged have their constraint released. The tag is eventually removed when the event in descheduled. Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20130620164254.GA3556@quad Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-06-20 16:42:54 +00:00
}
} else {
for (i = n0; i < n; i++) {
perf/x86: Fix shared register mutual exclusion enforcement This patch fixes a problem with the shared registers mutual exclusion code and incremental event scheduling by the generic perf_event code. There was a bug whereby the mutual exclusion on the shared registers was not enforced because of incremental scheduling abort due to event constraints. As an example on Intel Nehalem, consider the following events: group1= L1D_CACHE_LD:E_STATE,OFFCORE_RESPONSE_0:PF_RFO,L1D_CACHE_LD:I_STATE group2= L1D_CACHE_LD:I_STATE The L1D_CACHE_LD event can only be measured by 2 counters. Yet, there are 3 instances here. The first group can be scheduled and is committed. Then, the generic code tries to schedule group2 and this fails (because there is no more counter to support the 3rd instance of L1D_CACHE_LD). But in x86_schedule_events() error path, put_event_contraints() is invoked on ALL the events and not just the ones that just failed. That causes the "lock" on the shared offcore_response MSR to be released. Yet the first group is actually scheduled and is exposed to reprogramming of that shared msr by the sibling HT thread. In other words, there is no guarantee on what is measured. This patch fixes the problem by tagging committed events with the PERF_X86_EVENT_COMMITTED tag. In the error path of x86_schedule_events(), only the events NOT tagged have their constraint released. The tag is eventually removed when the event in descheduled. Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20130620164254.GA3556@quad Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-06-20 16:42:54 +00:00
e = cpuc->event_list[i];
perf/x86/intel: Implement cross-HT corruption bug workaround This patch implements a software workaround for a HW erratum on Intel SandyBridge, IvyBridge and Haswell processors with Hyperthreading enabled. The errata are documented for each processor in their respective specification update documents: - SandyBridge: BJ122 - IvyBridge: BV98 - Haswell: HSD29 The bug causes silent counter corruption across hyperthreads only when measuring certain memory events (0xd0, 0xd1, 0xd2, 0xd3). Counters measuring those events may leak counts to the sibling counter. For instance, counter 0, thread 0 measuring event 0xd0, may leak to counter 0, thread 1, regardless of the event measured there. The size of the leak is not predictible. It all depends on the workload and the state of each sibling hyper-thread. The corrupting events do undercount as a consequence of the leak. The leak is compensated automatically only when the sibling counter measures the exact same corrupting event AND the workload is on the two threads is the same. Given, there is no way to guarantee this, a work-around is necessary. Furthermore, there is a serious problem if the leaked count is added to a low-occurrence event. In that case the corruption on the low occurrence event can be very large, e.g., orders of magnitude. There is no HW or FW workaround for this problem. The bug is very easy to reproduce on a loaded system. Here is an example on a Haswell client, where CPU0, CPU4 are siblings. We load the CPUs with a simple triad app streaming large floating-point vector. We use 0x81d0 corrupting event (MEM_UOPS_RETIRED:ALL_LOADS) and 0x20cc (ROB_MISC_EVENTS:LBR_INSERTS). Given we are not using the LBR, the 0x20cc event should be zero. $ taskset -c 0 triad & $ taskset -c 4 triad & $ perf stat -a -C 0 -e r81d0 sleep 100 & $ perf stat -a -C 4 -r20cc sleep 10 Performance counter stats for 'system wide': 139 277 291 r20cc 10,000969126 seconds time elapsed In this example, 0x81d0 and r20cc ar eusing sinling counters on CPU0 and CPU4. 0x81d0 leaks into 0x20cc and corrupts it from 0 to 139 millions occurrences. This patch provides a software workaround to this problem by modifying the way events are scheduled onto counters by the kernel. The patch forces cross-thread mutual exclusion between counters in case a corrupting event is measured by one of the hyper-threads. If thread 0, counter 0 is measuring event 0xd0, then nothing can be measured on counter 0, thread 1. If no corrupting event is measured on any hyper-thread, event scheduling proceeds as before. The same example run with the workaround enabled, yield the correct answer: $ taskset -c 0 triad & $ taskset -c 4 triad & $ perf stat -a -C 0 -e r81d0 sleep 100 & $ perf stat -a -C 4 -r20cc sleep 10 Performance counter stats for 'system wide': 0 r20cc 10,000969126 seconds time elapsed The patch does provide correctness for all non-corrupting events. It does not "repatriate" the leaked counts back to the leaking counter. This is planned for a second patch series. This patch series makes this repatriation more easy by guaranteeing the sibling counter is not measuring any useful event. The patch introduces dynamic constraints for events. That means that events which did not have constraints, i.e., could be measured on any counters, may now be constrained to a subset of the counters depending on what is going on the sibling thread. The algorithm is similar to a cache coherency protocol. We call it XSU in reference to Exclusive, Shared, Unused, the 3 possible states of a PMU counter. As a consequence of the workaround, users may see an increased amount of event multiplexing, even in situtations where there are fewer events than counters measured on a CPU. Patch has been tested on all three impacted processors. Note that when HT is off, there is no corruption. However, the workaround is still enabled, yet not costing too much. Adding a dynamic detection of HT on turned out to be complex are requiring too much to code to be justified. This patch addresses the issue when PEBS is not used. A subsequent patch fixes the problem when PEBS is used. Signed-off-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> [spinlock_t -> raw_spinlock_t] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Stephane Eranian <eranian@google.com> Cc: bp@alien8.de Cc: jolsa@redhat.com Cc: kan.liang@intel.com Link: http://lkml.kernel.org/r/1416251225-17721-7-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-11-17 19:06:58 +00:00
/*
* release events that failed scheduling
*/
if (x86_pmu.put_event_constraints)
perf/x86: Fix shared register mutual exclusion enforcement This patch fixes a problem with the shared registers mutual exclusion code and incremental event scheduling by the generic perf_event code. There was a bug whereby the mutual exclusion on the shared registers was not enforced because of incremental scheduling abort due to event constraints. As an example on Intel Nehalem, consider the following events: group1= L1D_CACHE_LD:E_STATE,OFFCORE_RESPONSE_0:PF_RFO,L1D_CACHE_LD:I_STATE group2= L1D_CACHE_LD:I_STATE The L1D_CACHE_LD event can only be measured by 2 counters. Yet, there are 3 instances here. The first group can be scheduled and is committed. Then, the generic code tries to schedule group2 and this fails (because there is no more counter to support the 3rd instance of L1D_CACHE_LD). But in x86_schedule_events() error path, put_event_contraints() is invoked on ALL the events and not just the ones that just failed. That causes the "lock" on the shared offcore_response MSR to be released. Yet the first group is actually scheduled and is exposed to reprogramming of that shared msr by the sibling HT thread. In other words, there is no guarantee on what is measured. This patch fixes the problem by tagging committed events with the PERF_X86_EVENT_COMMITTED tag. In the error path of x86_schedule_events(), only the events NOT tagged have their constraint released. The tag is eventually removed when the event in descheduled. Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20130620164254.GA3556@quad Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-06-20 16:42:54 +00:00
x86_pmu.put_event_constraints(cpuc, e);
cpuc->event_constraint[i] = NULL;
}
}
if (x86_pmu.stop_scheduling)
x86_pmu.stop_scheduling(cpuc);
perf/x86/intel: Implement cross-HT corruption bug workaround This patch implements a software workaround for a HW erratum on Intel SandyBridge, IvyBridge and Haswell processors with Hyperthreading enabled. The errata are documented for each processor in their respective specification update documents: - SandyBridge: BJ122 - IvyBridge: BV98 - Haswell: HSD29 The bug causes silent counter corruption across hyperthreads only when measuring certain memory events (0xd0, 0xd1, 0xd2, 0xd3). Counters measuring those events may leak counts to the sibling counter. For instance, counter 0, thread 0 measuring event 0xd0, may leak to counter 0, thread 1, regardless of the event measured there. The size of the leak is not predictible. It all depends on the workload and the state of each sibling hyper-thread. The corrupting events do undercount as a consequence of the leak. The leak is compensated automatically only when the sibling counter measures the exact same corrupting event AND the workload is on the two threads is the same. Given, there is no way to guarantee this, a work-around is necessary. Furthermore, there is a serious problem if the leaked count is added to a low-occurrence event. In that case the corruption on the low occurrence event can be very large, e.g., orders of magnitude. There is no HW or FW workaround for this problem. The bug is very easy to reproduce on a loaded system. Here is an example on a Haswell client, where CPU0, CPU4 are siblings. We load the CPUs with a simple triad app streaming large floating-point vector. We use 0x81d0 corrupting event (MEM_UOPS_RETIRED:ALL_LOADS) and 0x20cc (ROB_MISC_EVENTS:LBR_INSERTS). Given we are not using the LBR, the 0x20cc event should be zero. $ taskset -c 0 triad & $ taskset -c 4 triad & $ perf stat -a -C 0 -e r81d0 sleep 100 & $ perf stat -a -C 4 -r20cc sleep 10 Performance counter stats for 'system wide': 139 277 291 r20cc 10,000969126 seconds time elapsed In this example, 0x81d0 and r20cc ar eusing sinling counters on CPU0 and CPU4. 0x81d0 leaks into 0x20cc and corrupts it from 0 to 139 millions occurrences. This patch provides a software workaround to this problem by modifying the way events are scheduled onto counters by the kernel. The patch forces cross-thread mutual exclusion between counters in case a corrupting event is measured by one of the hyper-threads. If thread 0, counter 0 is measuring event 0xd0, then nothing can be measured on counter 0, thread 1. If no corrupting event is measured on any hyper-thread, event scheduling proceeds as before. The same example run with the workaround enabled, yield the correct answer: $ taskset -c 0 triad & $ taskset -c 4 triad & $ perf stat -a -C 0 -e r81d0 sleep 100 & $ perf stat -a -C 4 -r20cc sleep 10 Performance counter stats for 'system wide': 0 r20cc 10,000969126 seconds time elapsed The patch does provide correctness for all non-corrupting events. It does not "repatriate" the leaked counts back to the leaking counter. This is planned for a second patch series. This patch series makes this repatriation more easy by guaranteeing the sibling counter is not measuring any useful event. The patch introduces dynamic constraints for events. That means that events which did not have constraints, i.e., could be measured on any counters, may now be constrained to a subset of the counters depending on what is going on the sibling thread. The algorithm is similar to a cache coherency protocol. We call it XSU in reference to Exclusive, Shared, Unused, the 3 possible states of a PMU counter. As a consequence of the workaround, users may see an increased amount of event multiplexing, even in situtations where there are fewer events than counters measured on a CPU. Patch has been tested on all three impacted processors. Note that when HT is off, there is no corruption. However, the workaround is still enabled, yet not costing too much. Adding a dynamic detection of HT on turned out to be complex are requiring too much to code to be justified. This patch addresses the issue when PEBS is not used. A subsequent patch fixes the problem when PEBS is used. Signed-off-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> [spinlock_t -> raw_spinlock_t] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Stephane Eranian <eranian@google.com> Cc: bp@alien8.de Cc: jolsa@redhat.com Cc: kan.liang@intel.com Link: http://lkml.kernel.org/r/1416251225-17721-7-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-11-17 19:06:58 +00:00
return unsched ? -EINVAL : 0;
}
/*
* dogrp: true if must collect siblings events (group)
* returns total number of events and error code
*/
static int collect_events(struct cpu_hw_events *cpuc, struct perf_event *leader, bool dogrp)
{
struct perf_event *event;
int n, max_count;
max_count = x86_pmu.num_counters + x86_pmu.num_counters_fixed;
/* current number of events already accepted */
n = cpuc->n_events;
if (!cpuc->n_events)
cpuc->pebs_output = 0;
if (!cpuc->is_fake && leader->attr.precise_ip) {
/*
* For PEBS->PT, if !aux_event, the group leader (PT) went
* away, the group was broken down and this singleton event
* can't schedule any more.
*/
if (is_pebs_pt(leader) && !leader->aux_event)
return -EINVAL;
/*
* pebs_output: 0: no PEBS so far, 1: PT, 2: DS
*/
if (cpuc->pebs_output &&
cpuc->pebs_output != is_pebs_pt(leader) + 1)
return -EINVAL;
cpuc->pebs_output = is_pebs_pt(leader) + 1;
}
if (is_x86_event(leader)) {
if (n >= max_count)
return -EINVAL;
cpuc->event_list[n] = leader;
n++;
perf/x86/amd: Add support for Large Increment per Cycle Events Description of hardware operation --------------------------------- The core AMD PMU has a 4-bit wide per-cycle increment for each performance monitor counter. That works for most events, but now with AMD Family 17h and above processors, some events can occur more than 15 times in a cycle. Those events are called "Large Increment per Cycle" events. In order to count these events, two adjacent h/w PMCs get their count signals merged to form 8 bits per cycle total. In addition, the PERF_CTR count registers are merged to be able to count up to 64 bits. Normally, events like instructions retired, get programmed on a single counter like so: PERF_CTL0 (MSR 0xc0010200) 0x000000000053ff0c # event 0x0c, umask 0xff PERF_CTR0 (MSR 0xc0010201) 0x0000800000000001 # r/w 48-bit count The next counter at MSRs 0xc0010202-3 remains unused, or can be used independently to count something else. When counting Large Increment per Cycle events, such as FLOPs, however, we now have to reserve the next counter and program the PERF_CTL (config) register with the Merge event (0xFFF), like so: PERF_CTL0 (msr 0xc0010200) 0x000000000053ff03 # FLOPs event, umask 0xff PERF_CTR0 (msr 0xc0010201) 0x0000800000000001 # rd 64-bit cnt, wr lo 48b PERF_CTL1 (msr 0xc0010202) 0x0000000f004000ff # Merge event, enable bit PERF_CTR1 (msr 0xc0010203) 0x0000000000000000 # wr hi 16-bits count The count is widened from the normal 48-bits to 64 bits by having the second counter carry the higher 16 bits of the count in its lower 16 bits of its counter register. The odd counter, e.g., PERF_CTL1, is programmed with the enabled Merge event before the even counter, PERF_CTL0. The Large Increment feature is available starting with Family 17h. For more details, search any Family 17h PPR for the "Large Increment per Cycle Events" section, e.g., section 2.1.15.3 on p. 173 in this version: https://www.amd.com/system/files/TechDocs/56176_ppr_Family_17h_Model_71h_B0_pub_Rev_3.06.zip Description of software operation --------------------------------- The following steps are taken in order to support reserving and enabling the extra counter for Large Increment per Cycle events: 1. In the main x86 scheduler, we reduce the number of available counters by the number of Large Increment per Cycle events being scheduled, tracked by a new cpuc variable 'n_pair' and a new amd_put_event_constraints_f17h(). This improves the counter scheduler success rate. 2. In perf_assign_events(), if a counter is assigned to a Large Increment event, we increment the current counter variable, so the counter used for the Merge event is removed from assignment consideration by upcoming event assignments. 3. In find_counter(), if a counter has been found for the Large Increment event, we set the next counter as used, to prevent other events from using it. 4. We perform steps 2 & 3 also in the x86 scheduler fastpath, i.e., we add Merge event accounting to the existing used_mask logic. 5. Finally, we add on the programming of Merge event to the neighbouring PMC counters in the counter enable/disable{_all} code paths. Currently, software does not support a single PMU with mixed 48- and 64-bit counting, so Large increment event counts are limited to 48 bits. In set_period, we zero-out the upper 16 bits of the count, so the hardware doesn't copy them to the even counter's higher bits. Simple invocation example showing counting 8 FLOPs per 256-bit/%ymm vaddps instruction executed in a loop 100 million times: perf stat -e cpu/fp_ret_sse_avx_ops.all/,cpu/instructions/ <workload> Performance counter stats for '<workload>': 800,000,000 cpu/fp_ret_sse_avx_ops.all/u 300,042,101 cpu/instructions/u Prior to this patch, the reported SSE/AVX FLOPs retired count would be wrong. [peterz: lots of renames and edits to the code] Signed-off-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2019-11-14 18:37:20 +00:00
if (is_counter_pair(&leader->hw))
cpuc->n_pair++;
}
if (!dogrp)
return n;
for_each_sibling_event(event, leader) {
if (!is_x86_event(event) ||
event->state <= PERF_EVENT_STATE_OFF)
continue;
if (n >= max_count)
return -EINVAL;
cpuc->event_list[n] = event;
n++;
perf/x86/amd: Add support for Large Increment per Cycle Events Description of hardware operation --------------------------------- The core AMD PMU has a 4-bit wide per-cycle increment for each performance monitor counter. That works for most events, but now with AMD Family 17h and above processors, some events can occur more than 15 times in a cycle. Those events are called "Large Increment per Cycle" events. In order to count these events, two adjacent h/w PMCs get their count signals merged to form 8 bits per cycle total. In addition, the PERF_CTR count registers are merged to be able to count up to 64 bits. Normally, events like instructions retired, get programmed on a single counter like so: PERF_CTL0 (MSR 0xc0010200) 0x000000000053ff0c # event 0x0c, umask 0xff PERF_CTR0 (MSR 0xc0010201) 0x0000800000000001 # r/w 48-bit count The next counter at MSRs 0xc0010202-3 remains unused, or can be used independently to count something else. When counting Large Increment per Cycle events, such as FLOPs, however, we now have to reserve the next counter and program the PERF_CTL (config) register with the Merge event (0xFFF), like so: PERF_CTL0 (msr 0xc0010200) 0x000000000053ff03 # FLOPs event, umask 0xff PERF_CTR0 (msr 0xc0010201) 0x0000800000000001 # rd 64-bit cnt, wr lo 48b PERF_CTL1 (msr 0xc0010202) 0x0000000f004000ff # Merge event, enable bit PERF_CTR1 (msr 0xc0010203) 0x0000000000000000 # wr hi 16-bits count The count is widened from the normal 48-bits to 64 bits by having the second counter carry the higher 16 bits of the count in its lower 16 bits of its counter register. The odd counter, e.g., PERF_CTL1, is programmed with the enabled Merge event before the even counter, PERF_CTL0. The Large Increment feature is available starting with Family 17h. For more details, search any Family 17h PPR for the "Large Increment per Cycle Events" section, e.g., section 2.1.15.3 on p. 173 in this version: https://www.amd.com/system/files/TechDocs/56176_ppr_Family_17h_Model_71h_B0_pub_Rev_3.06.zip Description of software operation --------------------------------- The following steps are taken in order to support reserving and enabling the extra counter for Large Increment per Cycle events: 1. In the main x86 scheduler, we reduce the number of available counters by the number of Large Increment per Cycle events being scheduled, tracked by a new cpuc variable 'n_pair' and a new amd_put_event_constraints_f17h(). This improves the counter scheduler success rate. 2. In perf_assign_events(), if a counter is assigned to a Large Increment event, we increment the current counter variable, so the counter used for the Merge event is removed from assignment consideration by upcoming event assignments. 3. In find_counter(), if a counter has been found for the Large Increment event, we set the next counter as used, to prevent other events from using it. 4. We perform steps 2 & 3 also in the x86 scheduler fastpath, i.e., we add Merge event accounting to the existing used_mask logic. 5. Finally, we add on the programming of Merge event to the neighbouring PMC counters in the counter enable/disable{_all} code paths. Currently, software does not support a single PMU with mixed 48- and 64-bit counting, so Large increment event counts are limited to 48 bits. In set_period, we zero-out the upper 16 bits of the count, so the hardware doesn't copy them to the even counter's higher bits. Simple invocation example showing counting 8 FLOPs per 256-bit/%ymm vaddps instruction executed in a loop 100 million times: perf stat -e cpu/fp_ret_sse_avx_ops.all/,cpu/instructions/ <workload> Performance counter stats for '<workload>': 800,000,000 cpu/fp_ret_sse_avx_ops.all/u 300,042,101 cpu/instructions/u Prior to this patch, the reported SSE/AVX FLOPs retired count would be wrong. [peterz: lots of renames and edits to the code] Signed-off-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2019-11-14 18:37:20 +00:00
if (is_counter_pair(&event->hw))
cpuc->n_pair++;
}
return n;
}
static inline void x86_assign_hw_event(struct perf_event *event,
struct cpu_hw_events *cpuc, int i)
{
struct hw_perf_event *hwc = &event->hw;
int idx;
idx = hwc->idx = cpuc->assign[i];
hwc->last_cpu = smp_processor_id();
hwc->last_tag = ++cpuc->tags[i];
switch (hwc->idx) {
case INTEL_PMC_IDX_FIXED_BTS:
case INTEL_PMC_IDX_FIXED_VLBR:
hwc->config_base = 0;
hwc->event_base = 0;
break;
case INTEL_PMC_IDX_FIXED ... INTEL_PMC_IDX_FIXED_BTS-1:
hwc->config_base = MSR_ARCH_PERFMON_FIXED_CTR_CTRL;
hwc->event_base = MSR_ARCH_PERFMON_FIXED_CTR0 +
(idx - INTEL_PMC_IDX_FIXED);
hwc->event_base_rdpmc = (idx - INTEL_PMC_IDX_FIXED) | 1<<30;
break;
default:
hwc->config_base = x86_pmu_config_addr(hwc->idx);
hwc->event_base = x86_pmu_event_addr(hwc->idx);
hwc->event_base_rdpmc = x86_pmu_rdpmc_index(hwc->idx);
break;
}
}
perf/x86: Add helper to obtain performance counter index perf_event_read_local() is the safest way to obtain measurements associated with performance events. In some cases the overhead introduced by perf_event_read_local() affects the measurements and the use of rdpmcl() is needed. rdpmcl() requires the index of the performance counter used so a helper is introduced to determine the index used by a provided performance event. The index used by a performance event may change when interrupts are enabled. A check is added to ensure that the index is only accessed with interrupts disabled. Even with this check the use of this counter needs to be done with care to ensure it is queried and used within the same disabled interrupts section. This change introduces a new checkpatch warning: CHECK: extern prototypes should be avoided in .h files +extern int x86_perf_rdpmc_index(struct perf_event *event); This warning was discussed and designated as a false positive in http://lkml.kernel.org/r/20180919091759.GZ24124@hirez.programming.kicks-ass.net Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: fenghua.yu@intel.com Cc: tony.luck@intel.com Cc: acme@kernel.org Cc: gavin.hindman@intel.com Cc: jithu.joseph@intel.com Cc: dave.hansen@intel.com Cc: hpa@zytor.com Link: https://lkml.kernel.org/r/b277ffa78a51254f5414f7b1bc1923826874566e.1537377064.git.reinette.chatre@intel.com
2018-09-19 17:29:07 +00:00
/**
* x86_perf_rdpmc_index - Return PMC counter used for event
* @event: the perf_event to which the PMC counter was assigned
*
* The counter assigned to this performance event may change if interrupts
* are enabled. This counter should thus never be used while interrupts are
* enabled. Before this function is used to obtain the assigned counter the
* event should be checked for validity using, for example,
* perf_event_read_local(), within the same interrupt disabled section in
* which this counter is planned to be used.
*
* Return: The index of the performance monitoring counter assigned to
* @perf_event.
*/
int x86_perf_rdpmc_index(struct perf_event *event)
{
lockdep_assert_irqs_disabled();
return event->hw.event_base_rdpmc;
}
static inline int match_prev_assignment(struct hw_perf_event *hwc,
struct cpu_hw_events *cpuc,
int i)
{
return hwc->idx == cpuc->assign[i] &&
hwc->last_cpu == smp_processor_id() &&
hwc->last_tag == cpuc->tags[i];
}
2010-06-16 12:37:10 +00:00
static void x86_pmu_start(struct perf_event *event, int flags);
2010-06-16 12:37:10 +00:00
static void x86_pmu_enable(struct pmu *pmu)
{
x86: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Acked-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-17 17:30:40 +00:00
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
struct perf_event *event;
struct hw_perf_event *hwc;
int i, added = cpuc->n_added;
if (!x86_pmu_initialized())
return;
if (cpuc->enabled)
return;
if (cpuc->n_added) {
int n_running = cpuc->n_events - cpuc->n_added;
/*
* apply assignment obtained either from
* hw_perf_group_sched_in() or x86_pmu_enable()
*
* step1: save events moving to new counters
*/
for (i = 0; i < n_running; i++) {
event = cpuc->event_list[i];
hwc = &event->hw;
/*
* we can avoid reprogramming counter if:
* - assigned same counter as last time
* - running on same CPU as last time
* - no other event has used the counter since
*/
if (hwc->idx == -1 ||
match_prev_assignment(hwc, cpuc, i))
continue;
2010-06-16 12:37:10 +00:00
/*
* Ensure we don't accidentally enable a stopped
* counter simply because we rescheduled.
*/
if (hwc->state & PERF_HES_STOPPED)
hwc->state |= PERF_HES_ARCH;
x86_pmu_stop(event, PERF_EF_UPDATE);
}
/*
* step2: reprogram moved events into new counters
*/
for (i = 0; i < cpuc->n_events; i++) {
event = cpuc->event_list[i];
hwc = &event->hw;
perf, x86: Fix hw_perf_enable() event assignment What happens is that we schedule badly like: <...>-1987 [019] 280.252808: x86_pmu_start: event-46/1300c0: idx: 0 <...>-1987 [019] 280.252811: x86_pmu_start: event-47/1300c0: idx: 1 <...>-1987 [019] 280.252812: x86_pmu_start: event-48/1300c0: idx: 2 <...>-1987 [019] 280.252813: x86_pmu_start: event-49/1300c0: idx: 3 <...>-1987 [019] 280.252814: x86_pmu_start: event-50/1300c0: idx: 32 <...>-1987 [019] 280.252825: x86_pmu_stop: event-46/1300c0: idx: 0 <...>-1987 [019] 280.252826: x86_pmu_stop: event-47/1300c0: idx: 1 <...>-1987 [019] 280.252827: x86_pmu_stop: event-48/1300c0: idx: 2 <...>-1987 [019] 280.252828: x86_pmu_stop: event-49/1300c0: idx: 3 <...>-1987 [019] 280.252829: x86_pmu_stop: event-50/1300c0: idx: 32 <...>-1987 [019] 280.252834: x86_pmu_start: event-47/1300c0: idx: 1 <...>-1987 [019] 280.252834: x86_pmu_start: event-48/1300c0: idx: 2 <...>-1987 [019] 280.252835: x86_pmu_start: event-49/1300c0: idx: 3 <...>-1987 [019] 280.252836: x86_pmu_start: event-50/1300c0: idx: 32 <...>-1987 [019] 280.252837: x86_pmu_start: event-51/1300c0: idx: 32 *FAIL* This happens because we only iterate the n_running events in the first pass, and reset their index to -1 if they don't match to force a re-assignment. Now, in our RR example, n_running == 0 because we fully unscheduled, so event-50 will retain its idx==32, even though in scheduling it will have gotten idx=0, and we don't trigger the re-assign path. The easiest way to fix this is the below patch, which simply validates the full assignment in the second pass. Reported-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1268311069.5037.31.camel@laptop> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 12:40:30 +00:00
if (!match_prev_assignment(hwc, cpuc, i))
x86_assign_hw_event(event, cpuc, i);
perf, x86: Fix hw_perf_enable() event assignment What happens is that we schedule badly like: <...>-1987 [019] 280.252808: x86_pmu_start: event-46/1300c0: idx: 0 <...>-1987 [019] 280.252811: x86_pmu_start: event-47/1300c0: idx: 1 <...>-1987 [019] 280.252812: x86_pmu_start: event-48/1300c0: idx: 2 <...>-1987 [019] 280.252813: x86_pmu_start: event-49/1300c0: idx: 3 <...>-1987 [019] 280.252814: x86_pmu_start: event-50/1300c0: idx: 32 <...>-1987 [019] 280.252825: x86_pmu_stop: event-46/1300c0: idx: 0 <...>-1987 [019] 280.252826: x86_pmu_stop: event-47/1300c0: idx: 1 <...>-1987 [019] 280.252827: x86_pmu_stop: event-48/1300c0: idx: 2 <...>-1987 [019] 280.252828: x86_pmu_stop: event-49/1300c0: idx: 3 <...>-1987 [019] 280.252829: x86_pmu_stop: event-50/1300c0: idx: 32 <...>-1987 [019] 280.252834: x86_pmu_start: event-47/1300c0: idx: 1 <...>-1987 [019] 280.252834: x86_pmu_start: event-48/1300c0: idx: 2 <...>-1987 [019] 280.252835: x86_pmu_start: event-49/1300c0: idx: 3 <...>-1987 [019] 280.252836: x86_pmu_start: event-50/1300c0: idx: 32 <...>-1987 [019] 280.252837: x86_pmu_start: event-51/1300c0: idx: 32 *FAIL* This happens because we only iterate the n_running events in the first pass, and reset their index to -1 if they don't match to force a re-assignment. Now, in our RR example, n_running == 0 because we fully unscheduled, so event-50 will retain its idx==32, even though in scheduling it will have gotten idx=0, and we don't trigger the re-assign path. The easiest way to fix this is the below patch, which simply validates the full assignment in the second pass. Reported-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1268311069.5037.31.camel@laptop> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 12:40:30 +00:00
else if (i < n_running)
continue;
2010-06-16 12:37:10 +00:00
if (hwc->state & PERF_HES_ARCH)
continue;
x86_pmu_start(event, PERF_EF_RELOAD);
}
cpuc->n_added = 0;
perf_events_lapic_init();
}
cpuc->enabled = 1;
barrier();
x86_pmu.enable_all(added);
}
static DEFINE_PER_CPU(u64 [X86_PMC_IDX_MAX], pmc_prev_left);
/*
* Set the next IRQ period, based on the hwc->period_left value.
perf: Do the big rename: Performance Counters -> Performance Events Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 10:02:48 +00:00
* To be called with the event disabled in hw:
*/
int x86_perf_event_set_period(struct perf_event *event)
{
struct hw_perf_event *hwc = &event->hw;
s64 left = local64_read(&hwc->period_left);
s64 period = hwc->sample_period;
int ret = 0, idx = hwc->idx;
if (unlikely(!hwc->event_base))
return 0;
/*
* If we are way outside a reasonable range then just skip forward:
*/
if (unlikely(left <= -period)) {
left = period;
local64_set(&hwc->period_left, left);
hwc->last_period = period;
ret = 1;
}
if (unlikely(left <= 0)) {
left += period;
local64_set(&hwc->period_left, left);
hwc->last_period = period;
ret = 1;
}
/*
* Quirk: certain CPUs dont like it if just 1 hw_event is left:
*/
if (unlikely(left < 2))
left = 2;
if (left > x86_pmu.max_period)
left = x86_pmu.max_period;
perf/x86/intel: Add INST_RETIRED.ALL workarounds On Broadwell INST_RETIRED.ALL cannot be used with any period that doesn't have the lowest 6 bits cleared. And the period should not be smaller than 128. This is erratum BDM11 and BDM55: http://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/5th-gen-core-family-spec-update.pdf BDM11: When using a period < 100; we may get incorrect PEBS/PMI interrupts and/or an invalid counter state. BDM55: When bit0-5 of the period are !0 we may get redundant PEBS records on overflow. Add a new callback to enforce this, and set it for Broadwell. How does this handle the case when an app requests a specific period with some of the bottom bits set? Short answer: Any useful instruction sampling period needs to be 4-6 orders of magnitude larger than 128, as an PMI every 128 instructions would instantly overwhelm the system and be throttled. So the +-64 error from this is really small compared to the period, much smaller than normal system jitter. Long answer (by Peterz): IFF we guarantee perf_event_attr::sample_period >= 128. Suppose we start out with sample_period=192; then we'll set period_left to 192, we'll end up with left = 128 (we truncate the lower bits). We get an interrupt, find that period_left = 64 (>0 so we return 0 and don't get an overflow handler), up that to 128. Then we trigger again, at n=256. Then we find period_left = -64 (<=0 so we return 1 and do get an overflow). We increment with sample_period so we get left = 128. We fire again, at n=384, period_left = 0 (<=0 so we return 1 and get an overflow). And on and on. So while the individual interrupts are 'wrong' we get then with interval=256,128 in exactly the right ratio to average out at 192. And this works for everything >=128. So the num_samples*fixed_period thing is still entirely correct +- 127, which is good enough I'd say, as you already have that error anyhow. So no need to 'fix' the tools, al we need to do is refuse to create INST_RETIRED:ALL events with sample_period < 128. Signed-off-by: Andi Kleen <ak@linux.intel.com> [ Updated comments and changelog a bit. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: http://lkml.kernel.org/r/1424225886-18652-3-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-18 02:18:06 +00:00
if (x86_pmu.limit_period)
left = x86_pmu.limit_period(event, left);
per_cpu(pmc_prev_left[idx], smp_processor_id()) = left;
perf/x86/intel: Fix event update for auto-reload There is a bug when reading event->count with large PEBS enabled. Here is an example: # ./read_count 0x71f0 0x122c0 0x1000000001c54 0x100000001257d 0x200000000bdc5 In fixed period mode, the auto-reload mechanism could be enabled for PEBS events, but the calculation of event->count does not take the auto-reload values into account. Anyone who reads event->count will get the wrong result, e.g x86_pmu_read(). This bug was introduced with the auto-reload mechanism enabled since commit: 851559e35fd5 ("perf/x86/intel: Use the PEBS auto reload mechanism when possible") Introduce intel_pmu_save_and_restart_reload() to calculate the event->count only for auto-reload. Since the counter increments a negative counter value and overflows on the sign switch, giving the interval: [-period, 0] the difference between two consequtive reads is: A) value2 - value1; when no overflows have happened in between, B) (0 - value1) + (value2 - (-period)); when one overflow happened in between, C) (0 - value1) + (n - 1) * (period) + (value2 - (-period)); when @n overflows happened in between. Here A) is the obvious difference, B) is the extension to the discrete interval, where the first term is to the top of the interval and the second term is from the bottom of the next interval and C) the extension to multiple intervals, where the middle term is the whole intervals covered. The equation for all cases is: value2 - value1 + n * period Previously the event->count is updated right before the sample output. But for case A, there is no PEBS record ready. It needs to be specially handled. Remove the auto-reload code from x86_perf_event_set_period() since we'll not longer call that function in this case. Based-on-code-from: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: acme@kernel.org Fixes: 851559e35fd5 ("perf/x86/intel: Use the PEBS auto reload mechanism when possible") Link: http://lkml.kernel.org/r/1518474035-21006-2-git-send-email-kan.liang@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-12 22:20:31 +00:00
/*
* The hw event starts counting from this event offset,
* mark it to be able to extra future deltas:
*/
local64_set(&hwc->prev_count, (u64)-left);
perf/x86/intel: Fix event update for auto-reload There is a bug when reading event->count with large PEBS enabled. Here is an example: # ./read_count 0x71f0 0x122c0 0x1000000001c54 0x100000001257d 0x200000000bdc5 In fixed period mode, the auto-reload mechanism could be enabled for PEBS events, but the calculation of event->count does not take the auto-reload values into account. Anyone who reads event->count will get the wrong result, e.g x86_pmu_read(). This bug was introduced with the auto-reload mechanism enabled since commit: 851559e35fd5 ("perf/x86/intel: Use the PEBS auto reload mechanism when possible") Introduce intel_pmu_save_and_restart_reload() to calculate the event->count only for auto-reload. Since the counter increments a negative counter value and overflows on the sign switch, giving the interval: [-period, 0] the difference between two consequtive reads is: A) value2 - value1; when no overflows have happened in between, B) (0 - value1) + (value2 - (-period)); when one overflow happened in between, C) (0 - value1) + (n - 1) * (period) + (value2 - (-period)); when @n overflows happened in between. Here A) is the obvious difference, B) is the extension to the discrete interval, where the first term is to the top of the interval and the second term is from the bottom of the next interval and C) the extension to multiple intervals, where the middle term is the whole intervals covered. The equation for all cases is: value2 - value1 + n * period Previously the event->count is updated right before the sample output. But for case A, there is no PEBS record ready. It needs to be specially handled. Remove the auto-reload code from x86_perf_event_set_period() since we'll not longer call that function in this case. Based-on-code-from: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: acme@kernel.org Fixes: 851559e35fd5 ("perf/x86/intel: Use the PEBS auto reload mechanism when possible") Link: http://lkml.kernel.org/r/1518474035-21006-2-git-send-email-kan.liang@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-12 22:20:31 +00:00
wrmsrl(hwc->event_base, (u64)(-left) & x86_pmu.cntval_mask);
perf/x86/amd: Add support for Large Increment per Cycle Events Description of hardware operation --------------------------------- The core AMD PMU has a 4-bit wide per-cycle increment for each performance monitor counter. That works for most events, but now with AMD Family 17h and above processors, some events can occur more than 15 times in a cycle. Those events are called "Large Increment per Cycle" events. In order to count these events, two adjacent h/w PMCs get their count signals merged to form 8 bits per cycle total. In addition, the PERF_CTR count registers are merged to be able to count up to 64 bits. Normally, events like instructions retired, get programmed on a single counter like so: PERF_CTL0 (MSR 0xc0010200) 0x000000000053ff0c # event 0x0c, umask 0xff PERF_CTR0 (MSR 0xc0010201) 0x0000800000000001 # r/w 48-bit count The next counter at MSRs 0xc0010202-3 remains unused, or can be used independently to count something else. When counting Large Increment per Cycle events, such as FLOPs, however, we now have to reserve the next counter and program the PERF_CTL (config) register with the Merge event (0xFFF), like so: PERF_CTL0 (msr 0xc0010200) 0x000000000053ff03 # FLOPs event, umask 0xff PERF_CTR0 (msr 0xc0010201) 0x0000800000000001 # rd 64-bit cnt, wr lo 48b PERF_CTL1 (msr 0xc0010202) 0x0000000f004000ff # Merge event, enable bit PERF_CTR1 (msr 0xc0010203) 0x0000000000000000 # wr hi 16-bits count The count is widened from the normal 48-bits to 64 bits by having the second counter carry the higher 16 bits of the count in its lower 16 bits of its counter register. The odd counter, e.g., PERF_CTL1, is programmed with the enabled Merge event before the even counter, PERF_CTL0. The Large Increment feature is available starting with Family 17h. For more details, search any Family 17h PPR for the "Large Increment per Cycle Events" section, e.g., section 2.1.15.3 on p. 173 in this version: https://www.amd.com/system/files/TechDocs/56176_ppr_Family_17h_Model_71h_B0_pub_Rev_3.06.zip Description of software operation --------------------------------- The following steps are taken in order to support reserving and enabling the extra counter for Large Increment per Cycle events: 1. In the main x86 scheduler, we reduce the number of available counters by the number of Large Increment per Cycle events being scheduled, tracked by a new cpuc variable 'n_pair' and a new amd_put_event_constraints_f17h(). This improves the counter scheduler success rate. 2. In perf_assign_events(), if a counter is assigned to a Large Increment event, we increment the current counter variable, so the counter used for the Merge event is removed from assignment consideration by upcoming event assignments. 3. In find_counter(), if a counter has been found for the Large Increment event, we set the next counter as used, to prevent other events from using it. 4. We perform steps 2 & 3 also in the x86 scheduler fastpath, i.e., we add Merge event accounting to the existing used_mask logic. 5. Finally, we add on the programming of Merge event to the neighbouring PMC counters in the counter enable/disable{_all} code paths. Currently, software does not support a single PMU with mixed 48- and 64-bit counting, so Large increment event counts are limited to 48 bits. In set_period, we zero-out the upper 16 bits of the count, so the hardware doesn't copy them to the even counter's higher bits. Simple invocation example showing counting 8 FLOPs per 256-bit/%ymm vaddps instruction executed in a loop 100 million times: perf stat -e cpu/fp_ret_sse_avx_ops.all/,cpu/instructions/ <workload> Performance counter stats for '<workload>': 800,000,000 cpu/fp_ret_sse_avx_ops.all/u 300,042,101 cpu/instructions/u Prior to this patch, the reported SSE/AVX FLOPs retired count would be wrong. [peterz: lots of renames and edits to the code] Signed-off-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2019-11-14 18:37:20 +00:00
/*
* Clear the Merge event counter's upper 16 bits since
* we currently declare a 48-bit counter width
*/
if (is_counter_pair(hwc))
wrmsrl(x86_pmu_event_addr(idx + 1), 0);
/*
* Due to erratum on certan cpu we need
* a second write to be sure the register
* is updated properly
*/
if (x86_pmu.perfctr_second_write) {
wrmsrl(hwc->event_base,
(u64)(-left) & x86_pmu.cntval_mask);
}
perf: Do the big rename: Performance Counters -> Performance Events Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 10:02:48 +00:00
perf_event_update_userpage(event);
return ret;
}
void x86_pmu_enable_event(struct perf_event *event)
{
if (__this_cpu_read(cpu_hw_events.enabled))
__x86_pmu_enable_event(&event->hw,
ARCH_PERFMON_EVENTSEL_ENABLE);
}
/*
2010-06-16 12:37:10 +00:00
* Add a single event to the PMU.
*
* The event is added to the group of enabled events
* but only if it can be scheduled with existing events.
*/
2010-06-16 12:37:10 +00:00
static int x86_pmu_add(struct perf_event *event, int flags)
{
x86: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Acked-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-17 17:30:40 +00:00
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
struct hw_perf_event *hwc;
int assign[X86_PMC_IDX_MAX];
int n, n0, ret;
hwc = &event->hw;
n0 = cpuc->n_events;
ret = n = collect_events(cpuc, event, false);
if (ret < 0)
goto out;
2010-06-16 12:37:10 +00:00
hwc->state = PERF_HES_UPTODATE | PERF_HES_STOPPED;
if (!(flags & PERF_EF_START))
hwc->state |= PERF_HES_ARCH;
/*
* If group events scheduling transaction was started,
* skip the schedulability test here, it will be performed
* at commit time (->commit_txn) as a whole.
*
* If commit fails, we'll call ->del() on all events
* for which ->add() was called.
*/
if (cpuc->txn_flags & PERF_PMU_TXN_ADD)
goto done_collect;
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 16:54:39 +00:00
ret = x86_pmu.schedule_events(cpuc, n, assign);
if (ret)
goto out;
/*
* copy new assignment, now we know it is possible
* will be used by hw_perf_enable()
*/
memcpy(cpuc->assign, assign, n*sizeof(int));
done_collect:
/*
* Commit the collect_events() state. See x86_pmu_del() and
* x86_pmu_*_txn().
*/
cpuc->n_events = n;
cpuc->n_added += n - n0;
perf_events: Fix event scheduling issues introduced by transactional API The transactional API patch between the generic and model-specific code introduced several important bugs with event scheduling, at least on X86. If you had pinned events, e.g., watchdog, and were over-committing the PMU, you would get bogus counts. The bug was showing up on Intel CPU because events would move around more often that on AMD. But the problem also existed on AMD, though harder to expose. The issues were: - group_sched_in() was missing a cancel_txn() in the error path - cpuc->n_added was not properly maintained, leading to missing actions in hw_perf_enable(), i.e., n_running being 0. You cannot update n_added until you know the transaction has succeeded. In case of failed transaction n_added was not adjusted back. - in case of failed transactions, event_sched_out() was called and eventually invoked x86_disable_event() to touch the HW reg. But with transactions, on X86, event_sched_in() does not touch HW registers, it simply collects events into a list. Thus, you could end up calling x86_disable_event() on a counter which did not correspond to the current event when idx != -1. The patch modifies the generic and X86 code to avoid all those problems. First, we keep track of the number of events added last. In case the transaction fails, we substract them from n_added. This approach is necessary (as opposed to delaying updates to n_added) because not all event updates use the transaction API, e.g., single events. Second, we encapsulate the event_sched_in() and event_sched_out() in group_sched_in() inside the transaction. That makes the operations symmetrical and you can also detect that you are inside a transaction and skip the HW reg access by checking cpuc->group_flag. With this patch, you can now overcommit the PMU even with pinned system-wide events present and still get valid counts. Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1274796225.5882.1389.camel@twins> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-25 14:23:10 +00:00
cpuc->n_txn += n - n0;
if (x86_pmu.add) {
/*
* This is before x86_pmu_enable() will call x86_pmu_start(),
* so we enable LBRs before an event needs them etc..
*/
x86_pmu.add(event);
}
ret = 0;
out:
return ret;
}
2010-06-16 12:37:10 +00:00
static void x86_pmu_start(struct perf_event *event, int flags)
{
x86: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Acked-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-17 17:30:40 +00:00
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
int idx = event->hw.idx;
2010-06-16 12:37:10 +00:00
if (WARN_ON_ONCE(!(event->hw.state & PERF_HES_STOPPED)))
return;
if (WARN_ON_ONCE(idx == -1))
return;
if (flags & PERF_EF_RELOAD) {
WARN_ON_ONCE(!(event->hw.state & PERF_HES_UPTODATE));
x86_perf_event_set_period(event);
}
event->hw.state = 0;
cpuc->events[idx] = event;
__set_bit(idx, cpuc->active_mask);
__set_bit(idx, cpuc->running);
x86_pmu.enable(event);
perf_event_update_userpage(event);
}
perf: Do the big rename: Performance Counters -> Performance Events Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 10:02:48 +00:00
void perf_event_print_debug(void)
{
u64 ctrl, status, overflow, pmc_ctrl, pmc_count, prev_left, fixed;
u64 pebs, debugctl;
perf: Do the big rename: Performance Counters -> Performance Events Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 10:02:48 +00:00
struct cpu_hw_events *cpuc;
unsigned long flags;
int cpu, idx;
if (!x86_pmu.num_counters)
return;
local_irq_save(flags);
cpu = smp_processor_id();
perf: Do the big rename: Performance Counters -> Performance Events Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 10:02:48 +00:00
cpuc = &per_cpu(cpu_hw_events, cpu);
if (x86_pmu.version >= 2) {
rdmsrl(MSR_CORE_PERF_GLOBAL_CTRL, ctrl);
rdmsrl(MSR_CORE_PERF_GLOBAL_STATUS, status);
rdmsrl(MSR_CORE_PERF_GLOBAL_OVF_CTRL, overflow);
rdmsrl(MSR_ARCH_PERFMON_FIXED_CTR_CTRL, fixed);
pr_info("\n");
pr_info("CPU#%d: ctrl: %016llx\n", cpu, ctrl);
pr_info("CPU#%d: status: %016llx\n", cpu, status);
pr_info("CPU#%d: overflow: %016llx\n", cpu, overflow);
pr_info("CPU#%d: fixed: %016llx\n", cpu, fixed);
if (x86_pmu.pebs_constraints) {
rdmsrl(MSR_IA32_PEBS_ENABLE, pebs);
pr_info("CPU#%d: pebs: %016llx\n", cpu, pebs);
}
if (x86_pmu.lbr_nr) {
rdmsrl(MSR_IA32_DEBUGCTLMSR, debugctl);
pr_info("CPU#%d: debugctl: %016llx\n", cpu, debugctl);
}
}
pr_info("CPU#%d: active: %016llx\n", cpu, *(u64 *)cpuc->active_mask);
for (idx = 0; idx < x86_pmu.num_counters; idx++) {
rdmsrl(x86_pmu_config_addr(idx), pmc_ctrl);
rdmsrl(x86_pmu_event_addr(idx), pmc_count);
prev_left = per_cpu(pmc_prev_left[idx], cpu);
pr_info("CPU#%d: gen-PMC%d ctrl: %016llx\n",
cpu, idx, pmc_ctrl);
pr_info("CPU#%d: gen-PMC%d count: %016llx\n",
cpu, idx, pmc_count);
pr_info("CPU#%d: gen-PMC%d left: %016llx\n",
cpu, idx, prev_left);
}
for (idx = 0; idx < x86_pmu.num_counters_fixed; idx++) {
rdmsrl(MSR_ARCH_PERFMON_FIXED_CTR0 + idx, pmc_count);
pr_info("CPU#%d: fixed-PMC%d count: %016llx\n",
cpu, idx, pmc_count);
}
local_irq_restore(flags);
}
void x86_pmu_stop(struct perf_event *event, int flags)
{
x86: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Acked-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-17 17:30:40 +00:00
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
perf: Do the big rename: Performance Counters -> Performance Events Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 10:02:48 +00:00
struct hw_perf_event *hwc = &event->hw;
x86/perf/amd: Remove need to check "running" bit in NMI handler Spurious interrupt support was added to perf in the following commit, almost a decade ago: 63e6be6d98e1 ("perf, x86: Catch spurious interrupts after disabling counters") The two previous patches (resolving the race condition when disabling a PMC and NMI latency mitigation) allow for the removal of this older spurious interrupt support. Currently in x86_pmu_stop(), the bit for the PMC in the active_mask bitmap is cleared before disabling the PMC, which sets up a race condition. This race condition was mitigated by introducing the running bitmap. That race condition can be eliminated by first disabling the PMC, waiting for PMC reset on overflow and then clearing the bit for the PMC in the active_mask bitmap. The NMI handler will not re-enable a disabled counter. If x86_pmu_stop() is called from the perf NMI handler, the NMI latency mitigation support will guard against any unhandled NMI messages. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <stable@vger.kernel.org> # 4.14.x- Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: https://lkml.kernel.org/r/Message-ID: Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-02 15:21:18 +00:00
if (test_bit(hwc->idx, cpuc->active_mask)) {
2010-06-16 12:37:10 +00:00
x86_pmu.disable(event);
x86/perf/amd: Remove need to check "running" bit in NMI handler Spurious interrupt support was added to perf in the following commit, almost a decade ago: 63e6be6d98e1 ("perf, x86: Catch spurious interrupts after disabling counters") The two previous patches (resolving the race condition when disabling a PMC and NMI latency mitigation) allow for the removal of this older spurious interrupt support. Currently in x86_pmu_stop(), the bit for the PMC in the active_mask bitmap is cleared before disabling the PMC, which sets up a race condition. This race condition was mitigated by introducing the running bitmap. That race condition can be eliminated by first disabling the PMC, waiting for PMC reset on overflow and then clearing the bit for the PMC in the active_mask bitmap. The NMI handler will not re-enable a disabled counter. If x86_pmu_stop() is called from the perf NMI handler, the NMI latency mitigation support will guard against any unhandled NMI messages. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <stable@vger.kernel.org> # 4.14.x- Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: https://lkml.kernel.org/r/Message-ID: Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-02 15:21:18 +00:00
__clear_bit(hwc->idx, cpuc->active_mask);
2010-06-16 12:37:10 +00:00
cpuc->events[hwc->idx] = NULL;
WARN_ON_ONCE(hwc->state & PERF_HES_STOPPED);
hwc->state |= PERF_HES_STOPPED;
}
2010-06-16 12:37:10 +00:00
if ((flags & PERF_EF_UPDATE) && !(hwc->state & PERF_HES_UPTODATE)) {
/*
* Drain the remaining delta count out of a event
* that we are disabling:
*/
x86_perf_event_update(event);
hwc->state |= PERF_HES_UPTODATE;
}
}
2010-06-16 12:37:10 +00:00
static void x86_pmu_del(struct perf_event *event, int flags)
{
x86: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Acked-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-17 17:30:40 +00:00
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
int i;
perf_events: Fix event scheduling issues introduced by transactional API The transactional API patch between the generic and model-specific code introduced several important bugs with event scheduling, at least on X86. If you had pinned events, e.g., watchdog, and were over-committing the PMU, you would get bogus counts. The bug was showing up on Intel CPU because events would move around more often that on AMD. But the problem also existed on AMD, though harder to expose. The issues were: - group_sched_in() was missing a cancel_txn() in the error path - cpuc->n_added was not properly maintained, leading to missing actions in hw_perf_enable(), i.e., n_running being 0. You cannot update n_added until you know the transaction has succeeded. In case of failed transaction n_added was not adjusted back. - in case of failed transactions, event_sched_out() was called and eventually invoked x86_disable_event() to touch the HW reg. But with transactions, on X86, event_sched_in() does not touch HW registers, it simply collects events into a list. Thus, you could end up calling x86_disable_event() on a counter which did not correspond to the current event when idx != -1. The patch modifies the generic and X86 code to avoid all those problems. First, we keep track of the number of events added last. In case the transaction fails, we substract them from n_added. This approach is necessary (as opposed to delaying updates to n_added) because not all event updates use the transaction API, e.g., single events. Second, we encapsulate the event_sched_in() and event_sched_out() in group_sched_in() inside the transaction. That makes the operations symmetrical and you can also detect that you are inside a transaction and skip the HW reg access by checking cpuc->group_flag. With this patch, you can now overcommit the PMU even with pinned system-wide events present and still get valid counts. Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1274796225.5882.1389.camel@twins> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-25 14:23:10 +00:00
/*
* If we're called during a txn, we only need to undo x86_pmu.add.
perf_events: Fix event scheduling issues introduced by transactional API The transactional API patch between the generic and model-specific code introduced several important bugs with event scheduling, at least on X86. If you had pinned events, e.g., watchdog, and were over-committing the PMU, you would get bogus counts. The bug was showing up on Intel CPU because events would move around more often that on AMD. But the problem also existed on AMD, though harder to expose. The issues were: - group_sched_in() was missing a cancel_txn() in the error path - cpuc->n_added was not properly maintained, leading to missing actions in hw_perf_enable(), i.e., n_running being 0. You cannot update n_added until you know the transaction has succeeded. In case of failed transaction n_added was not adjusted back. - in case of failed transactions, event_sched_out() was called and eventually invoked x86_disable_event() to touch the HW reg. But with transactions, on X86, event_sched_in() does not touch HW registers, it simply collects events into a list. Thus, you could end up calling x86_disable_event() on a counter which did not correspond to the current event when idx != -1. The patch modifies the generic and X86 code to avoid all those problems. First, we keep track of the number of events added last. In case the transaction fails, we substract them from n_added. This approach is necessary (as opposed to delaying updates to n_added) because not all event updates use the transaction API, e.g., single events. Second, we encapsulate the event_sched_in() and event_sched_out() in group_sched_in() inside the transaction. That makes the operations symmetrical and you can also detect that you are inside a transaction and skip the HW reg access by checking cpuc->group_flag. With this patch, you can now overcommit the PMU even with pinned system-wide events present and still get valid counts. Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1274796225.5882.1389.camel@twins> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-25 14:23:10 +00:00
* The events never got scheduled and ->cancel_txn will truncate
* the event_list.
*
* XXX assumes any ->del() called during a TXN will only be on
* an event added during that same TXN.
perf_events: Fix event scheduling issues introduced by transactional API The transactional API patch between the generic and model-specific code introduced several important bugs with event scheduling, at least on X86. If you had pinned events, e.g., watchdog, and were over-committing the PMU, you would get bogus counts. The bug was showing up on Intel CPU because events would move around more often that on AMD. But the problem also existed on AMD, though harder to expose. The issues were: - group_sched_in() was missing a cancel_txn() in the error path - cpuc->n_added was not properly maintained, leading to missing actions in hw_perf_enable(), i.e., n_running being 0. You cannot update n_added until you know the transaction has succeeded. In case of failed transaction n_added was not adjusted back. - in case of failed transactions, event_sched_out() was called and eventually invoked x86_disable_event() to touch the HW reg. But with transactions, on X86, event_sched_in() does not touch HW registers, it simply collects events into a list. Thus, you could end up calling x86_disable_event() on a counter which did not correspond to the current event when idx != -1. The patch modifies the generic and X86 code to avoid all those problems. First, we keep track of the number of events added last. In case the transaction fails, we substract them from n_added. This approach is necessary (as opposed to delaying updates to n_added) because not all event updates use the transaction API, e.g., single events. Second, we encapsulate the event_sched_in() and event_sched_out() in group_sched_in() inside the transaction. That makes the operations symmetrical and you can also detect that you are inside a transaction and skip the HW reg access by checking cpuc->group_flag. With this patch, you can now overcommit the PMU even with pinned system-wide events present and still get valid counts. Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1274796225.5882.1389.camel@twins> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-25 14:23:10 +00:00
*/
if (cpuc->txn_flags & PERF_PMU_TXN_ADD)
goto do_del;
perf_events: Fix event scheduling issues introduced by transactional API The transactional API patch between the generic and model-specific code introduced several important bugs with event scheduling, at least on X86. If you had pinned events, e.g., watchdog, and were over-committing the PMU, you would get bogus counts. The bug was showing up on Intel CPU because events would move around more often that on AMD. But the problem also existed on AMD, though harder to expose. The issues were: - group_sched_in() was missing a cancel_txn() in the error path - cpuc->n_added was not properly maintained, leading to missing actions in hw_perf_enable(), i.e., n_running being 0. You cannot update n_added until you know the transaction has succeeded. In case of failed transaction n_added was not adjusted back. - in case of failed transactions, event_sched_out() was called and eventually invoked x86_disable_event() to touch the HW reg. But with transactions, on X86, event_sched_in() does not touch HW registers, it simply collects events into a list. Thus, you could end up calling x86_disable_event() on a counter which did not correspond to the current event when idx != -1. The patch modifies the generic and X86 code to avoid all those problems. First, we keep track of the number of events added last. In case the transaction fails, we substract them from n_added. This approach is necessary (as opposed to delaying updates to n_added) because not all event updates use the transaction API, e.g., single events. Second, we encapsulate the event_sched_in() and event_sched_out() in group_sched_in() inside the transaction. That makes the operations symmetrical and you can also detect that you are inside a transaction and skip the HW reg access by checking cpuc->group_flag. With this patch, you can now overcommit the PMU even with pinned system-wide events present and still get valid counts. Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1274796225.5882.1389.camel@twins> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-25 14:23:10 +00:00
/*
* Not a TXN, therefore cleanup properly.
*/
2010-06-16 12:37:10 +00:00
x86_pmu_stop(event, PERF_EF_UPDATE);
for (i = 0; i < cpuc->n_events; i++) {
if (event == cpuc->event_list[i])
break;
}
if (WARN_ON_ONCE(i == cpuc->n_events)) /* called ->del() without ->add() ? */
return;
perf/x86: Fix event scheduling Vince "Super Tester" Weaver reported a new round of syscall fuzzing (Trinity) failures, with perf WARN_ON()s triggering. He also provided traces of the failures. This is I think the relevant bit: > pec_1076_warn-2804 [000] d... 147.926153: x86_pmu_disable: x86_pmu_disable > pec_1076_warn-2804 [000] d... 147.926153: x86_pmu_state: Events: { > pec_1076_warn-2804 [000] d... 147.926156: x86_pmu_state: 0: state: .R config: ffffffffffffffff ( (null)) > pec_1076_warn-2804 [000] d... 147.926158: x86_pmu_state: 33: state: AR config: 0 (ffff88011ac99800) > pec_1076_warn-2804 [000] d... 147.926159: x86_pmu_state: } > pec_1076_warn-2804 [000] d... 147.926160: x86_pmu_state: n_events: 1, n_added: 0, n_txn: 1 > pec_1076_warn-2804 [000] d... 147.926161: x86_pmu_state: Assignment: { > pec_1076_warn-2804 [000] d... 147.926162: x86_pmu_state: 0->33 tag: 1 config: 0 (ffff88011ac99800) > pec_1076_warn-2804 [000] d... 147.926163: x86_pmu_state: } > pec_1076_warn-2804 [000] d... 147.926166: collect_events: Adding event: 1 (ffff880119ec8800) So we add the insn:p event (fd[23]). At this point we should have: n_events = 2, n_added = 1, n_txn = 1 > pec_1076_warn-2804 [000] d... 147.926170: collect_events: Adding event: 0 (ffff8800c9e01800) > pec_1076_warn-2804 [000] d... 147.926172: collect_events: Adding event: 4 (ffff8800cbab2c00) We try and add the {BP,cycles,br_insn} group (fd[3], fd[4], fd[15]). These events are 0:cycles and 4:br_insn, the BP event isn't x86_pmu so that's not visible. group_sched_in() pmu->start_txn() /* nop - BP pmu */ event_sched_in() event->pmu->add() So here we should end up with: 0: n_events = 3, n_added = 2, n_txn = 2 4: n_events = 4, n_added = 3, n_txn = 3 But seeing the below state on x86_pmu_enable(), the must have failed, because the 0 and 4 events aren't there anymore. Looking at group_sched_in(), since the BP is the leader, its event_sched_in() must have succeeded, for otherwise we would not have seen the sibling adds. But since neither 0 or 4 are in the below state; their event_sched_in() must have failed; but I don't see why, the complete state: 0,0,1:p,4 fits perfectly fine on a core2. However, since we try and schedule 4 it means the 0 event must have succeeded! Therefore the 4 event must have failed, its failure will have put group_sched_in() into the fail path, which will call: event_sched_out() event->pmu->del() on 0 and the BP event. Now x86_pmu_del() will reduce n_events; but it will not reduce n_added; giving what we see below: n_event = 2, n_added = 2, n_txn = 2 > pec_1076_warn-2804 [000] d... 147.926177: x86_pmu_enable: x86_pmu_enable > pec_1076_warn-2804 [000] d... 147.926177: x86_pmu_state: Events: { > pec_1076_warn-2804 [000] d... 147.926179: x86_pmu_state: 0: state: .R config: ffffffffffffffff ( (null)) > pec_1076_warn-2804 [000] d... 147.926181: x86_pmu_state: 33: state: AR config: 0 (ffff88011ac99800) > pec_1076_warn-2804 [000] d... 147.926182: x86_pmu_state: } > pec_1076_warn-2804 [000] d... 147.926184: x86_pmu_state: n_events: 2, n_added: 2, n_txn: 2 > pec_1076_warn-2804 [000] d... 147.926184: x86_pmu_state: Assignment: { > pec_1076_warn-2804 [000] d... 147.926186: x86_pmu_state: 0->33 tag: 1 config: 0 (ffff88011ac99800) > pec_1076_warn-2804 [000] d... 147.926188: x86_pmu_state: 1->0 tag: 1 config: 1 (ffff880119ec8800) > pec_1076_warn-2804 [000] d... 147.926188: x86_pmu_state: } > pec_1076_warn-2804 [000] d... 147.926190: x86_pmu_enable: S0: hwc->idx: 33, hwc->last_cpu: 0, hwc->last_tag: 1 hwc->state: 0 So the problem is that x86_pmu_del(), when called from a group_sched_in() that fails (for whatever reason), and without x86_pmu TXN support (because the leader is !x86_pmu), will corrupt the n_added state. Reported-and-Tested-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Stephane Eranian <eranian@google.com> Cc: Dave Jones <davej@redhat.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20140221150312.GF3104@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-02-21 15:03:12 +00:00
/* If we have a newly added event; make sure to decrease n_added. */
if (i >= cpuc->n_events - cpuc->n_added)
--cpuc->n_added;
if (x86_pmu.put_event_constraints)
x86_pmu.put_event_constraints(cpuc, event);
/* Delete the array entry. */
perf/x86: Fix event/group validation Commit 43b4578071c0 ("perf/x86: Reduce stack usage of x86_schedule_events()") violated the rule that 'fake' scheduling; as used for event/group validation; should not change the event state. This went mostly un-noticed because repeated calls of x86_pmu::get_event_constraints() would give the same result. And x86_pmu::put_event_constraints() would mostly not do anything. Commit e979121b1b15 ("perf/x86/intel: Implement cross-HT corruption bug workaround") made the situation much worse by actually setting the event->hw.constraint value to NULL, so when validation and actual scheduling interact we get NULL ptr derefs. Fix it by removing the constraint pointer from the event and move it back to an array, this time in cpuc instead of on the stack. validate_group() x86_schedule_events() event->hw.constraint = c; # store <context switch> perf_task_event_sched_in() ... x86_schedule_events(); event->hw.constraint = c2; # store ... put_event_constraints(event); # assume failure to schedule intel_put_event_constraints() event->hw.constraint = NULL; <context switch end> c = event->hw.constraint; # read -> NULL if (!test_bit(hwc->idx, c->idxmsk)) # <- *BOOM* NULL deref This in particular is possible when the event in question is a cpu-wide event and group-leader, where the validate_group() tries to add an event to the group. Reported-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Hunter <ahh@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 43b4578071c0 ("perf/x86: Reduce stack usage of x86_schedule_events()") Fixes: e979121b1b15 ("perf/x86/intel: Implement cross-HT corruption bug workaround") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-21 08:57:13 +00:00
while (++i < cpuc->n_events) {
cpuc->event_list[i-1] = cpuc->event_list[i];
perf/x86: Fix event/group validation Commit 43b4578071c0 ("perf/x86: Reduce stack usage of x86_schedule_events()") violated the rule that 'fake' scheduling; as used for event/group validation; should not change the event state. This went mostly un-noticed because repeated calls of x86_pmu::get_event_constraints() would give the same result. And x86_pmu::put_event_constraints() would mostly not do anything. Commit e979121b1b15 ("perf/x86/intel: Implement cross-HT corruption bug workaround") made the situation much worse by actually setting the event->hw.constraint value to NULL, so when validation and actual scheduling interact we get NULL ptr derefs. Fix it by removing the constraint pointer from the event and move it back to an array, this time in cpuc instead of on the stack. validate_group() x86_schedule_events() event->hw.constraint = c; # store <context switch> perf_task_event_sched_in() ... x86_schedule_events(); event->hw.constraint = c2; # store ... put_event_constraints(event); # assume failure to schedule intel_put_event_constraints() event->hw.constraint = NULL; <context switch end> c = event->hw.constraint; # read -> NULL if (!test_bit(hwc->idx, c->idxmsk)) # <- *BOOM* NULL deref This in particular is possible when the event in question is a cpu-wide event and group-leader, where the validate_group() tries to add an event to the group. Reported-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Hunter <ahh@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 43b4578071c0 ("perf/x86: Reduce stack usage of x86_schedule_events()") Fixes: e979121b1b15 ("perf/x86/intel: Implement cross-HT corruption bug workaround") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-21 08:57:13 +00:00
cpuc->event_constraint[i-1] = cpuc->event_constraint[i];
}
cpuc->event_constraint[i-1] = NULL;
--cpuc->n_events;
perf: Do the big rename: Performance Counters -> Performance Events Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 10:02:48 +00:00
perf_event_update_userpage(event);
do_del:
if (x86_pmu.del) {
/*
* This is after x86_pmu_stop(); so we disable LBRs after any
* event can need them etc..
*/
x86_pmu.del(event);
}
}
int x86_pmu_handle_irq(struct pt_regs *regs)
{
struct perf_sample_data data;
perf: Do the big rename: Performance Counters -> Performance Events Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 10:02:48 +00:00
struct cpu_hw_events *cpuc;
struct perf_event *event;
int idx, handled = 0;
u64 val;
x86: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Acked-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-17 17:30:40 +00:00
cpuc = this_cpu_ptr(&cpu_hw_events);
perf, x86, nmi: Move LVT un-masking into irq handlers It was noticed that P4 machines were generating double NMIs for each perf event. These extra NMIs lead to 'Dazed and confused' messages on the screen. I tracked this down to a P4 quirk that said the overflow bit had to be cleared before re-enabling the apic LVT mask. My first attempt was to move the un-masking inside the perf nmi handler from before the chipset NMI handler to after. This broke Nehalem boxes that seem to like the unmasking before the counters themselves are re-enabled. In order to keep this change simple for 2.6.39, I decided to just simply move the apic LVT un-masking to the beginning of all the chipset NMI handlers, with the exception of Pentium4's to fix the double NMI issue. Later on we can move the un-masking to later in the handlers to save a number of 'extra' NMIs on those particular chipsets. I tested this change on a P4 machine, an AMD machine, a Nehalem box, and a core2quad box. 'perf top' worked correctly along with various other small 'perf record' runs. Anything high stress breaks all the machines but that is a different problem. Thanks to various people for testing different versions of this patch. Reported-and-tested-by: Shaun Ruffell <sruffell@digium.com> Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Link: http://lkml.kernel.org/r/1303900353-10242-1-git-send-email-dzickus@redhat.com Signed-off-by: Ingo Molnar <mingo@elte.hu> CC: Cyrill Gorcunov <gorcunov@gmail.com>
2011-04-27 10:32:33 +00:00
/*
* Some chipsets need to unmask the LVTPC in a particular spot
* inside the nmi handler. As a result, the unmasking was pushed
* into all the nmi handlers.
*
* This generic handler doesn't seem to have any issues where the
* unmasking occurs so it was left at the top.
*/
apic_write(APIC_LVTPC, APIC_DM_NMI);
for (idx = 0; idx < x86_pmu.num_counters; idx++) {
x86/perf/amd: Remove need to check "running" bit in NMI handler Spurious interrupt support was added to perf in the following commit, almost a decade ago: 63e6be6d98e1 ("perf, x86: Catch spurious interrupts after disabling counters") The two previous patches (resolving the race condition when disabling a PMC and NMI latency mitigation) allow for the removal of this older spurious interrupt support. Currently in x86_pmu_stop(), the bit for the PMC in the active_mask bitmap is cleared before disabling the PMC, which sets up a race condition. This race condition was mitigated by introducing the running bitmap. That race condition can be eliminated by first disabling the PMC, waiting for PMC reset on overflow and then clearing the bit for the PMC in the active_mask bitmap. The NMI handler will not re-enable a disabled counter. If x86_pmu_stop() is called from the perf NMI handler, the NMI latency mitigation support will guard against any unhandled NMI messages. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <stable@vger.kernel.org> # 4.14.x- Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: https://lkml.kernel.org/r/Message-ID: Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-02 15:21:18 +00:00
if (!test_bit(idx, cpuc->active_mask))
continue;
perf: Do the big rename: Performance Counters -> Performance Events Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 10:02:48 +00:00
event = cpuc->events[idx];
val = x86_perf_event_update(event);
if (val & (1ULL << (x86_pmu.cntval_bits - 1)))
continue;
/*
perf: Do the big rename: Performance Counters -> Performance Events Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 10:02:48 +00:00
* event overflow
*/
perf, x86: Try to handle unknown nmis with an enabled PMU When the PMU is enabled it is valid to have unhandled nmis, two events could trigger 'simultaneously' raising two back-to-back NMIs. If the first NMI handles both, the latter will be empty and daze the CPU. The solution to avoid an 'unknown nmi' massage in this case was simply to stop the nmi handler chain when the PMU is enabled by stating the nmi was handled. This has the drawback that a) we can not detect unknown nmis anymore, and b) subsequent nmi handlers are not called. This patch addresses this. Now, we check this unknown NMI if it could be a PMU back-to-back NMI. Otherwise we pass it and let the kernel handle the unknown nmi. This is a debug log: cpu #6, nmi #32333, skip_nmi #32330, handled = 1, time = 1934364430 cpu #6, nmi #32334, skip_nmi #32330, handled = 1, time = 1934704616 cpu #6, nmi #32335, skip_nmi #32336, handled = 2, time = 1936032320 cpu #6, nmi #32336, skip_nmi #32336, handled = 0, time = 1936034139 cpu #6, nmi #32337, skip_nmi #32336, handled = 1, time = 1936120100 cpu #6, nmi #32338, skip_nmi #32336, handled = 1, time = 1936404607 cpu #6, nmi #32339, skip_nmi #32336, handled = 1, time = 1937983416 cpu #6, nmi #32340, skip_nmi #32341, handled = 2, time = 1938201032 cpu #6, nmi #32341, skip_nmi #32341, handled = 0, time = 1938202830 cpu #6, nmi #32342, skip_nmi #32341, handled = 1, time = 1938443743 cpu #6, nmi #32343, skip_nmi #32341, handled = 1, time = 1939956552 cpu #6, nmi #32344, skip_nmi #32341, handled = 1, time = 1940073224 cpu #6, nmi #32345, skip_nmi #32341, handled = 1, time = 1940485677 cpu #6, nmi #32346, skip_nmi #32347, handled = 2, time = 1941947772 cpu #6, nmi #32347, skip_nmi #32347, handled = 1, time = 1941949818 cpu #6, nmi #32348, skip_nmi #32347, handled = 0, time = 1941951591 Uhhuh. NMI received for unknown reason 00 on CPU 6. Do you have a strange power saving mode enabled? Dazed and confused, but trying to continue Deltas: nmi #32334 340186 nmi #32335 1327704 nmi #32336 1819 <<<< back-to-back nmi [1] nmi #32337 85961 nmi #32338 284507 nmi #32339 1578809 nmi #32340 217616 nmi #32341 1798 <<<< back-to-back nmi [2] nmi #32342 240913 nmi #32343 1512809 nmi #32344 116672 nmi #32345 412453 nmi #32346 1462095 <<<< 1st nmi (standard) handling 2 counters nmi #32347 2046 <<<< 2nd nmi (back-to-back) handling one counter nmi #32348 1773 <<<< 3rd nmi (back-to-back) handling no counter! [3] For back-to-back nmi detection there are the following rules: The PMU nmi handler was handling more than one counter and no counter was handled in the subsequent nmi (see [1] and [2] above). There is another case if there are two subsequent back-to-back nmis [3]. The 2nd is detected as back-to-back because the first handled more than one counter. If the second handles one counter and the 3rd handles nothing, we drop the 3rd nmi because it could be a back-to-back nmi. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> [ renamed nmi variable to pmu_nmi to avoid clash with .nmi in entry.S ] Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: peterz@infradead.org Cc: gorcunov@gmail.com Cc: fweisbec@gmail.com Cc: ying.huang@intel.com Cc: ming.m.lin@intel.com Cc: eranian@google.com LKML-Reference: <1283454469-1909-3-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-02 19:07:48 +00:00
handled++;
perf_sample_data_init(&data, 0, event->hw.last_period);
if (!x86_perf_event_set_period(event))
continue;
if (perf_event_overflow(event, &data, regs))
2010-06-16 12:37:10 +00:00
x86_pmu_stop(event, 0);
}
if (handled)
inc_irq_stat(apic_perf_irqs);
return handled;
}
perf: Do the big rename: Performance Counters -> Performance Events Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 10:02:48 +00:00
void perf_events_lapic_init(void)
{
if (!x86_pmu.apic || !x86_pmu_initialized())
return;
/*
* Always use NMI for PMU
*/
apic_write(APIC_LVTPC, APIC_DM_NMI);
}
kprobes, x86: Use NOKPROBE_SYMBOL() instead of __kprobes annotation Use NOKPROBE_SYMBOL macro for protecting functions from kprobes instead of __kprobes annotation under arch/x86. This applies nokprobe_inline annotation for some cases, because NOKPROBE_SYMBOL() will inhibit inlining by referring the symbol address. This just folds a bunch of previous NOKPROBE_SYMBOL() cleanup patches for x86 to one patch. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081814.26341.51656.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fernando Luis Vázquez Cao <fernando_b1@lab.ntt.co.jp> Cc: Gleb Natapov <gleb@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Lebon <jlebon@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Michel Lespinasse <walken@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 08:18:14 +00:00
static int
perf_event_nmi_handler(unsigned int cmd, struct pt_regs *regs)
{
u64 start_clock;
u64 finish_clock;
perf/x86: Fix NMI measurements OK, so what I'm actually seeing on my WSM is that sched/clock.c is 'broken' for the purpose we're using it for. What triggered it is that my WSM-EP is broken :-( [ 0.001000] tsc: Fast TSC calibration using PIT [ 0.002000] tsc: Detected 2533.715 MHz processor [ 0.500180] TSC synchronization [CPU#0 -> CPU#6]: [ 0.505197] Measured 3 cycles TSC warp between CPUs, turning off TSC clock. [ 0.004000] tsc: Marking TSC unstable due to check_tsc_sync_source failed For some reason it consistently detects TSC skew, even though NHM+ should have a single clock domain for 'reasonable' systems. This marks sched_clock_stable=0, which means that we do fancy stuff to try and get a 'sane' clock. Part of this fancy stuff relies on the tick, clearly that's gone when NOHZ=y. So for idle cpus time gets stuck, until it either wakes up or gets kicked by another cpu. While this is perfectly fine for the scheduler -- it only cares about actually running stuff, and when we're running stuff we're obviously not idle. This does somewhat break down for perf which can trigger events just fine on an otherwise idle cpu. So I've got NMIs get get 'measured' as taking ~1ms, which actually don't last nearly that long: <idle>-0 [013] d.h. 886.311970: rcu_nmi_enter <-do_nmi ... <idle>-0 [013] d.h. 886.311997: perf_sample_event_took: HERE!!! : 1040990 So ftrace (which uses sched_clock(), not the fancy bits) only sees ~27us, but we measure ~1ms !! Now since all this measurement stuff lives in x86 code, we can actually fix it. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: mingo@kernel.org Cc: dave.hansen@linux.intel.com Cc: eranian@google.com Cc: Don Zickus <dzickus@redhat.com> Cc: jmario@redhat.com Cc: acme@infradead.org Link: http://lkml.kernel.org/r/20131017133350.GG3364@laptop.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-17 13:32:10 +00:00
int ret;
perf/x86/intel: Fix PMI handling for Intel PT Intel PT is a separate PMU and it is not using any of the x86_pmu code paths, which means in particular that the active_events counter remains intact when new PT events are created. However, PT uses the generic x86_pmu PMI handler for its PMI handling needs. The problem here is that the latter checks active_events and in case of it being zero, exits without calling the actual x86_pmu.handle_nmi(), which results in unknown NMI errors and massive data loss for PT. The effect is not visible if there are other perf events in the system at the same time that keep active_events counter non-zero, for instance if the NMI watchdog is running, so one needs to disable it to reproduce the problem. At the same time, the active_events counter besides doing what the name suggests also implicitly serves as a PMC hardware and DS area reference counter. This patch adds a separate reference counter for the PMC hardware, leaving active_events for actually counting the events and makes sure it also counts PT and BTS events. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Link: http://lkml.kernel.org/r/87k2v92t0s.fsf@ashishki-desk.ger.corp.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-09 10:03:26 +00:00
/*
* All PMUs/events that share this PMI handler should make sure to
* increment active_events for their events.
*/
perf: Do the big rename: Performance Counters -> Performance Events Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 10:02:48 +00:00
if (!atomic_read(&active_events))
return NMI_DONE;
perf, x86: Try to handle unknown nmis with an enabled PMU When the PMU is enabled it is valid to have unhandled nmis, two events could trigger 'simultaneously' raising two back-to-back NMIs. If the first NMI handles both, the latter will be empty and daze the CPU. The solution to avoid an 'unknown nmi' massage in this case was simply to stop the nmi handler chain when the PMU is enabled by stating the nmi was handled. This has the drawback that a) we can not detect unknown nmis anymore, and b) subsequent nmi handlers are not called. This patch addresses this. Now, we check this unknown NMI if it could be a PMU back-to-back NMI. Otherwise we pass it and let the kernel handle the unknown nmi. This is a debug log: cpu #6, nmi #32333, skip_nmi #32330, handled = 1, time = 1934364430 cpu #6, nmi #32334, skip_nmi #32330, handled = 1, time = 1934704616 cpu #6, nmi #32335, skip_nmi #32336, handled = 2, time = 1936032320 cpu #6, nmi #32336, skip_nmi #32336, handled = 0, time = 1936034139 cpu #6, nmi #32337, skip_nmi #32336, handled = 1, time = 1936120100 cpu #6, nmi #32338, skip_nmi #32336, handled = 1, time = 1936404607 cpu #6, nmi #32339, skip_nmi #32336, handled = 1, time = 1937983416 cpu #6, nmi #32340, skip_nmi #32341, handled = 2, time = 1938201032 cpu #6, nmi #32341, skip_nmi #32341, handled = 0, time = 1938202830 cpu #6, nmi #32342, skip_nmi #32341, handled = 1, time = 1938443743 cpu #6, nmi #32343, skip_nmi #32341, handled = 1, time = 1939956552 cpu #6, nmi #32344, skip_nmi #32341, handled = 1, time = 1940073224 cpu #6, nmi #32345, skip_nmi #32341, handled = 1, time = 1940485677 cpu #6, nmi #32346, skip_nmi #32347, handled = 2, time = 1941947772 cpu #6, nmi #32347, skip_nmi #32347, handled = 1, time = 1941949818 cpu #6, nmi #32348, skip_nmi #32347, handled = 0, time = 1941951591 Uhhuh. NMI received for unknown reason 00 on CPU 6. Do you have a strange power saving mode enabled? Dazed and confused, but trying to continue Deltas: nmi #32334 340186 nmi #32335 1327704 nmi #32336 1819 <<<< back-to-back nmi [1] nmi #32337 85961 nmi #32338 284507 nmi #32339 1578809 nmi #32340 217616 nmi #32341 1798 <<<< back-to-back nmi [2] nmi #32342 240913 nmi #32343 1512809 nmi #32344 116672 nmi #32345 412453 nmi #32346 1462095 <<<< 1st nmi (standard) handling 2 counters nmi #32347 2046 <<<< 2nd nmi (back-to-back) handling one counter nmi #32348 1773 <<<< 3rd nmi (back-to-back) handling no counter! [3] For back-to-back nmi detection there are the following rules: The PMU nmi handler was handling more than one counter and no counter was handled in the subsequent nmi (see [1] and [2] above). There is another case if there are two subsequent back-to-back nmis [3]. The 2nd is detected as back-to-back because the first handled more than one counter. If the second handles one counter and the 3rd handles nothing, we drop the 3rd nmi because it could be a back-to-back nmi. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> [ renamed nmi variable to pmu_nmi to avoid clash with .nmi in entry.S ] Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: peterz@infradead.org Cc: gorcunov@gmail.com Cc: fweisbec@gmail.com Cc: ying.huang@intel.com Cc: ming.m.lin@intel.com Cc: eranian@google.com LKML-Reference: <1283454469-1909-3-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-02 19:07:48 +00:00
perf/x86: Fix NMI measurements OK, so what I'm actually seeing on my WSM is that sched/clock.c is 'broken' for the purpose we're using it for. What triggered it is that my WSM-EP is broken :-( [ 0.001000] tsc: Fast TSC calibration using PIT [ 0.002000] tsc: Detected 2533.715 MHz processor [ 0.500180] TSC synchronization [CPU#0 -> CPU#6]: [ 0.505197] Measured 3 cycles TSC warp between CPUs, turning off TSC clock. [ 0.004000] tsc: Marking TSC unstable due to check_tsc_sync_source failed For some reason it consistently detects TSC skew, even though NHM+ should have a single clock domain for 'reasonable' systems. This marks sched_clock_stable=0, which means that we do fancy stuff to try and get a 'sane' clock. Part of this fancy stuff relies on the tick, clearly that's gone when NOHZ=y. So for idle cpus time gets stuck, until it either wakes up or gets kicked by another cpu. While this is perfectly fine for the scheduler -- it only cares about actually running stuff, and when we're running stuff we're obviously not idle. This does somewhat break down for perf which can trigger events just fine on an otherwise idle cpu. So I've got NMIs get get 'measured' as taking ~1ms, which actually don't last nearly that long: <idle>-0 [013] d.h. 886.311970: rcu_nmi_enter <-do_nmi ... <idle>-0 [013] d.h. 886.311997: perf_sample_event_took: HERE!!! : 1040990 So ftrace (which uses sched_clock(), not the fancy bits) only sees ~27us, but we measure ~1ms !! Now since all this measurement stuff lives in x86 code, we can actually fix it. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: mingo@kernel.org Cc: dave.hansen@linux.intel.com Cc: eranian@google.com Cc: Don Zickus <dzickus@redhat.com> Cc: jmario@redhat.com Cc: acme@infradead.org Link: http://lkml.kernel.org/r/20131017133350.GG3364@laptop.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-17 13:32:10 +00:00
start_clock = sched_clock();
ret = x86_pmu.handle_irq(regs);
perf/x86: Fix NMI measurements OK, so what I'm actually seeing on my WSM is that sched/clock.c is 'broken' for the purpose we're using it for. What triggered it is that my WSM-EP is broken :-( [ 0.001000] tsc: Fast TSC calibration using PIT [ 0.002000] tsc: Detected 2533.715 MHz processor [ 0.500180] TSC synchronization [CPU#0 -> CPU#6]: [ 0.505197] Measured 3 cycles TSC warp between CPUs, turning off TSC clock. [ 0.004000] tsc: Marking TSC unstable due to check_tsc_sync_source failed For some reason it consistently detects TSC skew, even though NHM+ should have a single clock domain for 'reasonable' systems. This marks sched_clock_stable=0, which means that we do fancy stuff to try and get a 'sane' clock. Part of this fancy stuff relies on the tick, clearly that's gone when NOHZ=y. So for idle cpus time gets stuck, until it either wakes up or gets kicked by another cpu. While this is perfectly fine for the scheduler -- it only cares about actually running stuff, and when we're running stuff we're obviously not idle. This does somewhat break down for perf which can trigger events just fine on an otherwise idle cpu. So I've got NMIs get get 'measured' as taking ~1ms, which actually don't last nearly that long: <idle>-0 [013] d.h. 886.311970: rcu_nmi_enter <-do_nmi ... <idle>-0 [013] d.h. 886.311997: perf_sample_event_took: HERE!!! : 1040990 So ftrace (which uses sched_clock(), not the fancy bits) only sees ~27us, but we measure ~1ms !! Now since all this measurement stuff lives in x86 code, we can actually fix it. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: mingo@kernel.org Cc: dave.hansen@linux.intel.com Cc: eranian@google.com Cc: Don Zickus <dzickus@redhat.com> Cc: jmario@redhat.com Cc: acme@infradead.org Link: http://lkml.kernel.org/r/20131017133350.GG3364@laptop.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-17 13:32:10 +00:00
finish_clock = sched_clock();
perf_sample_event_took(finish_clock - start_clock);
return ret;
}
kprobes, x86: Use NOKPROBE_SYMBOL() instead of __kprobes annotation Use NOKPROBE_SYMBOL macro for protecting functions from kprobes instead of __kprobes annotation under arch/x86. This applies nokprobe_inline annotation for some cases, because NOKPROBE_SYMBOL() will inhibit inlining by referring the symbol address. This just folds a bunch of previous NOKPROBE_SYMBOL() cleanup patches for x86 to one patch. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081814.26341.51656.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fernando Luis Vázquez Cao <fernando_b1@lab.ntt.co.jp> Cc: Gleb Natapov <gleb@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Lebon <jlebon@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Michel Lespinasse <walken@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 08:18:14 +00:00
NOKPROBE_SYMBOL(perf_event_nmi_handler);
struct event_constraint emptyconstraint;
struct event_constraint unconstrained;
static int x86_pmu_prepare_cpu(unsigned int cpu)
{
struct cpu_hw_events *cpuc = &per_cpu(cpu_hw_events, cpu);
int i;
for (i = 0 ; i < X86_PERF_KFREE_MAX; i++)
cpuc->kfree_on_online[i] = NULL;
if (x86_pmu.cpu_prepare)
return x86_pmu.cpu_prepare(cpu);
return 0;
}
static int x86_pmu_dead_cpu(unsigned int cpu)
{
if (x86_pmu.cpu_dead)
x86_pmu.cpu_dead(cpu);
return 0;
}
static int x86_pmu_online_cpu(unsigned int cpu)
{
struct cpu_hw_events *cpuc = &per_cpu(cpu_hw_events, cpu);
int i;
for (i = 0 ; i < X86_PERF_KFREE_MAX; i++) {
kfree(cpuc->kfree_on_online[i]);
cpuc->kfree_on_online[i] = NULL;
}
return 0;
}
static int x86_pmu_starting_cpu(unsigned int cpu)
{
if (x86_pmu.cpu_starting)
x86_pmu.cpu_starting(cpu);
return 0;
}
static int x86_pmu_dying_cpu(unsigned int cpu)
{
if (x86_pmu.cpu_dying)
x86_pmu.cpu_dying(cpu);
return 0;
}
static void __init pmu_check_apic(void)
{
if (boot_cpu_has(X86_FEATURE_APIC))
return;
x86_pmu.apic = 0;
pr_info("no APIC, boot with the \"lapic\" boot parameter to force-enable it.\n");
pr_info("no hardware sampling interrupt available.\n");
/*
* If we have a PMU initialized but no APIC
* interrupts, we cannot sample hardware
* events (user-space has to fall back and
* sample via a hrtimer based software event):
*/
pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT;
}
static struct attribute_group x86_pmu_format_group __ro_after_init = {
.name = "format",
.attrs = NULL,
};
perf/x86/amd/power: Add AMD accumulated power reporting mechanism Introduce an AMD accumlated power reporting mechanism for the Family 15h, Model 60h processor that can be used to calculate the average power consumed by a processor during a measurement interval. The feature support is indicated by CPUID Fn8000_0007_EDX[12]. This feature will be implemented both in hwmon and perf. The current design provides one event to report per package/processor power consumption by counting each compute unit power value. Here the gory details of how the computation is done: * Tsample: compute unit power accumulator sample period * Tref: the PTSC counter period (PTSC: performance timestamp counter) * N: the ratio of compute unit power accumulator sample period to the PTSC period * Jmax: max compute unit accumulated power which is indicated by MSR_C001007b[MaxCpuSwPwrAcc] * Jx/Jy: compute unit accumulated power which is indicated by MSR_C001007a[CpuSwPwrAcc] * Tx/Ty: the value of performance timestamp counter which is indicated by CU_PTSC MSR_C0010280[PTSC] * PwrCPUave: CPU average power i. Determine the ratio of Tsample to Tref by executing CPUID Fn8000_0007. N = value of CPUID Fn8000_0007_ECX[CpuPwrSampleTimeRatio[15:0]]. ii. Read the full range of the cumulative energy value from the new MSR MaxCpuSwPwrAcc. Jmax = value returned. iii. At time x, software reads CpuSwPwrAcc and samples the PTSC. Jx = value read from CpuSwPwrAcc and Tx = value read from PTSC. iv. At time y, software reads CpuSwPwrAcc and samples the PTSC. Jy = value read from CpuSwPwrAcc and Ty = value read from PTSC. v. Calculate the average power consumption for a compute unit over time period (y-x). Unit of result is uWatt: if (Jy < Jx) // Rollover has occurred Jdelta = (Jy + Jmax) - Jx else Jdelta = Jy - Jx PwrCPUave = N * Jdelta * 1000 / (Ty - Tx) Simple example: root@hr-zp:/home/ray/tip# ./tools/perf/perf stat -a -e 'power/power-pkg/' make -j4 CHK include/config/kernel.release CHK include/generated/uapi/linux/version.h CHK include/generated/utsrelease.h CHK include/generated/timeconst.h CHK include/generated/bounds.h CHK include/generated/asm-offsets.h CALL scripts/checksyscalls.sh CHK include/generated/compile.h SKIPPED include/generated/compile.h Building modules, stage 2. Kernel: arch/x86/boot/bzImage is ready (#40) MODPOST 4225 modules Performance counter stats for 'system wide': 183.44 mWatts power/power-pkg/ 341.837270111 seconds time elapsed root@hr-zp:/home/ray/tip# ./tools/perf/perf stat -a -e 'power/power-pkg/' sleep 10 Performance counter stats for 'system wide': 0.18 mWatts power/power-pkg/ 10.012551815 seconds time elapsed Suggested-by: Peter Zijlstra <peterz@infradead.org> Suggested-by: Ingo Molnar <mingo@kernel.org> Suggested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: jacob.w.shin@gmail.com Link: http://lkml.kernel.org/r/1457502306-2559-1-git-send-email-ray.huang@amd.com [ Fixed the modular build. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-09 05:45:06 +00:00
ssize_t events_sysfs_show(struct device *dev, struct device_attribute *attr, char *page)
perf/x86: Make hardware event translations available in sysfs Add support to display hardware events translations available through the sysfs. Add 'events' group attribute under the sysfs x86 PMU record with attribute/file for each hardware event. This patch adds only backbone for PMUs to display config under 'events' directory. The specific PMU support itself will come in next patches, however this is how the sysfs group will look like: # ls /sys/devices/cpu/events/ branch-instructions branch-misses bus-cycles cache-misses cache-references cpu-cycles instructions ref-cycles stalled-cycles-backend stalled-cycles-frontend The file - hw event ID mapping is: file hw event ID --------------------------------------------------------------- cpu-cycles PERF_COUNT_HW_CPU_CYCLES instructions PERF_COUNT_HW_INSTRUCTIONS cache-references PERF_COUNT_HW_CACHE_REFERENCES cache-misses PERF_COUNT_HW_CACHE_MISSES branch-instructions PERF_COUNT_HW_BRANCH_INSTRUCTIONS branch-misses PERF_COUNT_HW_BRANCH_MISSES bus-cycles PERF_COUNT_HW_BUS_CYCLES stalled-cycles-frontend PERF_COUNT_HW_STALLED_CYCLES_FRONTEND stalled-cycles-backend PERF_COUNT_HW_STALLED_CYCLES_BACKEND ref-cycles PERF_COUNT_HW_REF_CPU_CYCLES Each file in the 'events' directory contains the term translation for the symbolic hw event for the currently running cpu model. # cat /sys/devices/cpu/events/stalled-cycles-backend event=0xb1,umask=0x01,inv,cmask=0x01 Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Stephane Eranian <eranian@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349873598-12583-2-git-send-email-jolsa@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-10 12:53:11 +00:00
{
struct perf_pmu_events_attr *pmu_attr =
perf/x86: Make hardware event translations available in sysfs Add support to display hardware events translations available through the sysfs. Add 'events' group attribute under the sysfs x86 PMU record with attribute/file for each hardware event. This patch adds only backbone for PMUs to display config under 'events' directory. The specific PMU support itself will come in next patches, however this is how the sysfs group will look like: # ls /sys/devices/cpu/events/ branch-instructions branch-misses bus-cycles cache-misses cache-references cpu-cycles instructions ref-cycles stalled-cycles-backend stalled-cycles-frontend The file - hw event ID mapping is: file hw event ID --------------------------------------------------------------- cpu-cycles PERF_COUNT_HW_CPU_CYCLES instructions PERF_COUNT_HW_INSTRUCTIONS cache-references PERF_COUNT_HW_CACHE_REFERENCES cache-misses PERF_COUNT_HW_CACHE_MISSES branch-instructions PERF_COUNT_HW_BRANCH_INSTRUCTIONS branch-misses PERF_COUNT_HW_BRANCH_MISSES bus-cycles PERF_COUNT_HW_BUS_CYCLES stalled-cycles-frontend PERF_COUNT_HW_STALLED_CYCLES_FRONTEND stalled-cycles-backend PERF_COUNT_HW_STALLED_CYCLES_BACKEND ref-cycles PERF_COUNT_HW_REF_CPU_CYCLES Each file in the 'events' directory contains the term translation for the symbolic hw event for the currently running cpu model. # cat /sys/devices/cpu/events/stalled-cycles-backend event=0xb1,umask=0x01,inv,cmask=0x01 Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Stephane Eranian <eranian@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349873598-12583-2-git-send-email-jolsa@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-10 12:53:11 +00:00
container_of(attr, struct perf_pmu_events_attr, attr);
u64 config = 0;
if (pmu_attr->id < x86_pmu.max_events)
config = x86_pmu.event_map(pmu_attr->id);
perf/x86: Make hardware event translations available in sysfs Add support to display hardware events translations available through the sysfs. Add 'events' group attribute under the sysfs x86 PMU record with attribute/file for each hardware event. This patch adds only backbone for PMUs to display config under 'events' directory. The specific PMU support itself will come in next patches, however this is how the sysfs group will look like: # ls /sys/devices/cpu/events/ branch-instructions branch-misses bus-cycles cache-misses cache-references cpu-cycles instructions ref-cycles stalled-cycles-backend stalled-cycles-frontend The file - hw event ID mapping is: file hw event ID --------------------------------------------------------------- cpu-cycles PERF_COUNT_HW_CPU_CYCLES instructions PERF_COUNT_HW_INSTRUCTIONS cache-references PERF_COUNT_HW_CACHE_REFERENCES cache-misses PERF_COUNT_HW_CACHE_MISSES branch-instructions PERF_COUNT_HW_BRANCH_INSTRUCTIONS branch-misses PERF_COUNT_HW_BRANCH_MISSES bus-cycles PERF_COUNT_HW_BUS_CYCLES stalled-cycles-frontend PERF_COUNT_HW_STALLED_CYCLES_FRONTEND stalled-cycles-backend PERF_COUNT_HW_STALLED_CYCLES_BACKEND ref-cycles PERF_COUNT_HW_REF_CPU_CYCLES Each file in the 'events' directory contains the term translation for the symbolic hw event for the currently running cpu model. # cat /sys/devices/cpu/events/stalled-cycles-backend event=0xb1,umask=0x01,inv,cmask=0x01 Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Stephane Eranian <eranian@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349873598-12583-2-git-send-email-jolsa@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-10 12:53:11 +00:00
/* string trumps id */
if (pmu_attr->event_str)
return sprintf(page, "%s", pmu_attr->event_str);
perf/x86: Make hardware event translations available in sysfs Add support to display hardware events translations available through the sysfs. Add 'events' group attribute under the sysfs x86 PMU record with attribute/file for each hardware event. This patch adds only backbone for PMUs to display config under 'events' directory. The specific PMU support itself will come in next patches, however this is how the sysfs group will look like: # ls /sys/devices/cpu/events/ branch-instructions branch-misses bus-cycles cache-misses cache-references cpu-cycles instructions ref-cycles stalled-cycles-backend stalled-cycles-frontend The file - hw event ID mapping is: file hw event ID --------------------------------------------------------------- cpu-cycles PERF_COUNT_HW_CPU_CYCLES instructions PERF_COUNT_HW_INSTRUCTIONS cache-references PERF_COUNT_HW_CACHE_REFERENCES cache-misses PERF_COUNT_HW_CACHE_MISSES branch-instructions PERF_COUNT_HW_BRANCH_INSTRUCTIONS branch-misses PERF_COUNT_HW_BRANCH_MISSES bus-cycles PERF_COUNT_HW_BUS_CYCLES stalled-cycles-frontend PERF_COUNT_HW_STALLED_CYCLES_FRONTEND stalled-cycles-backend PERF_COUNT_HW_STALLED_CYCLES_BACKEND ref-cycles PERF_COUNT_HW_REF_CPU_CYCLES Each file in the 'events' directory contains the term translation for the symbolic hw event for the currently running cpu model. # cat /sys/devices/cpu/events/stalled-cycles-backend event=0xb1,umask=0x01,inv,cmask=0x01 Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Stephane Eranian <eranian@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349873598-12583-2-git-send-email-jolsa@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-10 12:53:11 +00:00
return x86_pmu.events_sysfs_show(page, config);
}
perf/x86/amd/power: Add AMD accumulated power reporting mechanism Introduce an AMD accumlated power reporting mechanism for the Family 15h, Model 60h processor that can be used to calculate the average power consumed by a processor during a measurement interval. The feature support is indicated by CPUID Fn8000_0007_EDX[12]. This feature will be implemented both in hwmon and perf. The current design provides one event to report per package/processor power consumption by counting each compute unit power value. Here the gory details of how the computation is done: * Tsample: compute unit power accumulator sample period * Tref: the PTSC counter period (PTSC: performance timestamp counter) * N: the ratio of compute unit power accumulator sample period to the PTSC period * Jmax: max compute unit accumulated power which is indicated by MSR_C001007b[MaxCpuSwPwrAcc] * Jx/Jy: compute unit accumulated power which is indicated by MSR_C001007a[CpuSwPwrAcc] * Tx/Ty: the value of performance timestamp counter which is indicated by CU_PTSC MSR_C0010280[PTSC] * PwrCPUave: CPU average power i. Determine the ratio of Tsample to Tref by executing CPUID Fn8000_0007. N = value of CPUID Fn8000_0007_ECX[CpuPwrSampleTimeRatio[15:0]]. ii. Read the full range of the cumulative energy value from the new MSR MaxCpuSwPwrAcc. Jmax = value returned. iii. At time x, software reads CpuSwPwrAcc and samples the PTSC. Jx = value read from CpuSwPwrAcc and Tx = value read from PTSC. iv. At time y, software reads CpuSwPwrAcc and samples the PTSC. Jy = value read from CpuSwPwrAcc and Ty = value read from PTSC. v. Calculate the average power consumption for a compute unit over time period (y-x). Unit of result is uWatt: if (Jy < Jx) // Rollover has occurred Jdelta = (Jy + Jmax) - Jx else Jdelta = Jy - Jx PwrCPUave = N * Jdelta * 1000 / (Ty - Tx) Simple example: root@hr-zp:/home/ray/tip# ./tools/perf/perf stat -a -e 'power/power-pkg/' make -j4 CHK include/config/kernel.release CHK include/generated/uapi/linux/version.h CHK include/generated/utsrelease.h CHK include/generated/timeconst.h CHK include/generated/bounds.h CHK include/generated/asm-offsets.h CALL scripts/checksyscalls.sh CHK include/generated/compile.h SKIPPED include/generated/compile.h Building modules, stage 2. Kernel: arch/x86/boot/bzImage is ready (#40) MODPOST 4225 modules Performance counter stats for 'system wide': 183.44 mWatts power/power-pkg/ 341.837270111 seconds time elapsed root@hr-zp:/home/ray/tip# ./tools/perf/perf stat -a -e 'power/power-pkg/' sleep 10 Performance counter stats for 'system wide': 0.18 mWatts power/power-pkg/ 10.012551815 seconds time elapsed Suggested-by: Peter Zijlstra <peterz@infradead.org> Suggested-by: Ingo Molnar <mingo@kernel.org> Suggested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: jacob.w.shin@gmail.com Link: http://lkml.kernel.org/r/1457502306-2559-1-git-send-email-ray.huang@amd.com [ Fixed the modular build. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-09 05:45:06 +00:00
EXPORT_SYMBOL_GPL(events_sysfs_show);
perf/x86: Make hardware event translations available in sysfs Add support to display hardware events translations available through the sysfs. Add 'events' group attribute under the sysfs x86 PMU record with attribute/file for each hardware event. This patch adds only backbone for PMUs to display config under 'events' directory. The specific PMU support itself will come in next patches, however this is how the sysfs group will look like: # ls /sys/devices/cpu/events/ branch-instructions branch-misses bus-cycles cache-misses cache-references cpu-cycles instructions ref-cycles stalled-cycles-backend stalled-cycles-frontend The file - hw event ID mapping is: file hw event ID --------------------------------------------------------------- cpu-cycles PERF_COUNT_HW_CPU_CYCLES instructions PERF_COUNT_HW_INSTRUCTIONS cache-references PERF_COUNT_HW_CACHE_REFERENCES cache-misses PERF_COUNT_HW_CACHE_MISSES branch-instructions PERF_COUNT_HW_BRANCH_INSTRUCTIONS branch-misses PERF_COUNT_HW_BRANCH_MISSES bus-cycles PERF_COUNT_HW_BUS_CYCLES stalled-cycles-frontend PERF_COUNT_HW_STALLED_CYCLES_FRONTEND stalled-cycles-backend PERF_COUNT_HW_STALLED_CYCLES_BACKEND ref-cycles PERF_COUNT_HW_REF_CPU_CYCLES Each file in the 'events' directory contains the term translation for the symbolic hw event for the currently running cpu model. # cat /sys/devices/cpu/events/stalled-cycles-backend event=0xb1,umask=0x01,inv,cmask=0x01 Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Stephane Eranian <eranian@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349873598-12583-2-git-send-email-jolsa@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-10 12:53:11 +00:00
ssize_t events_ht_sysfs_show(struct device *dev, struct device_attribute *attr,
char *page)
{
struct perf_pmu_events_ht_attr *pmu_attr =
container_of(attr, struct perf_pmu_events_ht_attr, attr);
/*
* Report conditional events depending on Hyper-Threading.
*
* This is overly conservative as usually the HT special
* handling is not needed if the other CPU thread is idle.
*
* Note this does not (and cannot) handle the case when thread
* siblings are invisible, for example with virtualization
* if they are owned by some other guest. The user tool
* has to re-read when a thread sibling gets onlined later.
*/
return sprintf(page, "%s",
topology_max_smt_threads() > 1 ?
pmu_attr->event_str_ht :
pmu_attr->event_str_noht);
}
perf/x86: Make hardware event translations available in sysfs Add support to display hardware events translations available through the sysfs. Add 'events' group attribute under the sysfs x86 PMU record with attribute/file for each hardware event. This patch adds only backbone for PMUs to display config under 'events' directory. The specific PMU support itself will come in next patches, however this is how the sysfs group will look like: # ls /sys/devices/cpu/events/ branch-instructions branch-misses bus-cycles cache-misses cache-references cpu-cycles instructions ref-cycles stalled-cycles-backend stalled-cycles-frontend The file - hw event ID mapping is: file hw event ID --------------------------------------------------------------- cpu-cycles PERF_COUNT_HW_CPU_CYCLES instructions PERF_COUNT_HW_INSTRUCTIONS cache-references PERF_COUNT_HW_CACHE_REFERENCES cache-misses PERF_COUNT_HW_CACHE_MISSES branch-instructions PERF_COUNT_HW_BRANCH_INSTRUCTIONS branch-misses PERF_COUNT_HW_BRANCH_MISSES bus-cycles PERF_COUNT_HW_BUS_CYCLES stalled-cycles-frontend PERF_COUNT_HW_STALLED_CYCLES_FRONTEND stalled-cycles-backend PERF_COUNT_HW_STALLED_CYCLES_BACKEND ref-cycles PERF_COUNT_HW_REF_CPU_CYCLES Each file in the 'events' directory contains the term translation for the symbolic hw event for the currently running cpu model. # cat /sys/devices/cpu/events/stalled-cycles-backend event=0xb1,umask=0x01,inv,cmask=0x01 Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Stephane Eranian <eranian@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349873598-12583-2-git-send-email-jolsa@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-10 12:53:11 +00:00
EVENT_ATTR(cpu-cycles, CPU_CYCLES );
EVENT_ATTR(instructions, INSTRUCTIONS );
EVENT_ATTR(cache-references, CACHE_REFERENCES );
EVENT_ATTR(cache-misses, CACHE_MISSES );
EVENT_ATTR(branch-instructions, BRANCH_INSTRUCTIONS );
EVENT_ATTR(branch-misses, BRANCH_MISSES );
EVENT_ATTR(bus-cycles, BUS_CYCLES );
EVENT_ATTR(stalled-cycles-frontend, STALLED_CYCLES_FRONTEND );
EVENT_ATTR(stalled-cycles-backend, STALLED_CYCLES_BACKEND );
EVENT_ATTR(ref-cycles, REF_CPU_CYCLES );
static struct attribute *empty_attrs;
static struct attribute *events_attr[] = {
perf/x86: Make hardware event translations available in sysfs Add support to display hardware events translations available through the sysfs. Add 'events' group attribute under the sysfs x86 PMU record with attribute/file for each hardware event. This patch adds only backbone for PMUs to display config under 'events' directory. The specific PMU support itself will come in next patches, however this is how the sysfs group will look like: # ls /sys/devices/cpu/events/ branch-instructions branch-misses bus-cycles cache-misses cache-references cpu-cycles instructions ref-cycles stalled-cycles-backend stalled-cycles-frontend The file - hw event ID mapping is: file hw event ID --------------------------------------------------------------- cpu-cycles PERF_COUNT_HW_CPU_CYCLES instructions PERF_COUNT_HW_INSTRUCTIONS cache-references PERF_COUNT_HW_CACHE_REFERENCES cache-misses PERF_COUNT_HW_CACHE_MISSES branch-instructions PERF_COUNT_HW_BRANCH_INSTRUCTIONS branch-misses PERF_COUNT_HW_BRANCH_MISSES bus-cycles PERF_COUNT_HW_BUS_CYCLES stalled-cycles-frontend PERF_COUNT_HW_STALLED_CYCLES_FRONTEND stalled-cycles-backend PERF_COUNT_HW_STALLED_CYCLES_BACKEND ref-cycles PERF_COUNT_HW_REF_CPU_CYCLES Each file in the 'events' directory contains the term translation for the symbolic hw event for the currently running cpu model. # cat /sys/devices/cpu/events/stalled-cycles-backend event=0xb1,umask=0x01,inv,cmask=0x01 Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Stephane Eranian <eranian@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349873598-12583-2-git-send-email-jolsa@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-10 12:53:11 +00:00
EVENT_PTR(CPU_CYCLES),
EVENT_PTR(INSTRUCTIONS),
EVENT_PTR(CACHE_REFERENCES),
EVENT_PTR(CACHE_MISSES),
EVENT_PTR(BRANCH_INSTRUCTIONS),
EVENT_PTR(BRANCH_MISSES),
EVENT_PTR(BUS_CYCLES),
EVENT_PTR(STALLED_CYCLES_FRONTEND),
EVENT_PTR(STALLED_CYCLES_BACKEND),
EVENT_PTR(REF_CPU_CYCLES),
NULL,
};
/*
* Remove all undefined events (x86_pmu.event_map(id) == 0)
* out of events_attr attributes.
*/
static umode_t
is_visible(struct kobject *kobj, struct attribute *attr, int idx)
{
struct perf_pmu_events_attr *pmu_attr;
if (idx >= x86_pmu.max_events)
return 0;
pmu_attr = container_of(attr, struct perf_pmu_events_attr, attr.attr);
/* str trumps id */
return pmu_attr->event_str || x86_pmu.event_map(idx) ? attr->mode : 0;
}
static struct attribute_group x86_pmu_events_group __ro_after_init = {
perf/x86: Make hardware event translations available in sysfs Add support to display hardware events translations available through the sysfs. Add 'events' group attribute under the sysfs x86 PMU record with attribute/file for each hardware event. This patch adds only backbone for PMUs to display config under 'events' directory. The specific PMU support itself will come in next patches, however this is how the sysfs group will look like: # ls /sys/devices/cpu/events/ branch-instructions branch-misses bus-cycles cache-misses cache-references cpu-cycles instructions ref-cycles stalled-cycles-backend stalled-cycles-frontend The file - hw event ID mapping is: file hw event ID --------------------------------------------------------------- cpu-cycles PERF_COUNT_HW_CPU_CYCLES instructions PERF_COUNT_HW_INSTRUCTIONS cache-references PERF_COUNT_HW_CACHE_REFERENCES cache-misses PERF_COUNT_HW_CACHE_MISSES branch-instructions PERF_COUNT_HW_BRANCH_INSTRUCTIONS branch-misses PERF_COUNT_HW_BRANCH_MISSES bus-cycles PERF_COUNT_HW_BUS_CYCLES stalled-cycles-frontend PERF_COUNT_HW_STALLED_CYCLES_FRONTEND stalled-cycles-backend PERF_COUNT_HW_STALLED_CYCLES_BACKEND ref-cycles PERF_COUNT_HW_REF_CPU_CYCLES Each file in the 'events' directory contains the term translation for the symbolic hw event for the currently running cpu model. # cat /sys/devices/cpu/events/stalled-cycles-backend event=0xb1,umask=0x01,inv,cmask=0x01 Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Stephane Eranian <eranian@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349873598-12583-2-git-send-email-jolsa@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-10 12:53:11 +00:00
.name = "events",
.attrs = events_attr,
.is_visible = is_visible,
perf/x86: Make hardware event translations available in sysfs Add support to display hardware events translations available through the sysfs. Add 'events' group attribute under the sysfs x86 PMU record with attribute/file for each hardware event. This patch adds only backbone for PMUs to display config under 'events' directory. The specific PMU support itself will come in next patches, however this is how the sysfs group will look like: # ls /sys/devices/cpu/events/ branch-instructions branch-misses bus-cycles cache-misses cache-references cpu-cycles instructions ref-cycles stalled-cycles-backend stalled-cycles-frontend The file - hw event ID mapping is: file hw event ID --------------------------------------------------------------- cpu-cycles PERF_COUNT_HW_CPU_CYCLES instructions PERF_COUNT_HW_INSTRUCTIONS cache-references PERF_COUNT_HW_CACHE_REFERENCES cache-misses PERF_COUNT_HW_CACHE_MISSES branch-instructions PERF_COUNT_HW_BRANCH_INSTRUCTIONS branch-misses PERF_COUNT_HW_BRANCH_MISSES bus-cycles PERF_COUNT_HW_BUS_CYCLES stalled-cycles-frontend PERF_COUNT_HW_STALLED_CYCLES_FRONTEND stalled-cycles-backend PERF_COUNT_HW_STALLED_CYCLES_BACKEND ref-cycles PERF_COUNT_HW_REF_CPU_CYCLES Each file in the 'events' directory contains the term translation for the symbolic hw event for the currently running cpu model. # cat /sys/devices/cpu/events/stalled-cycles-backend event=0xb1,umask=0x01,inv,cmask=0x01 Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Stephane Eranian <eranian@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349873598-12583-2-git-send-email-jolsa@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-10 12:53:11 +00:00
};
ssize_t x86_event_sysfs_show(char *page, u64 config, u64 event)
{
u64 umask = (config & ARCH_PERFMON_EVENTSEL_UMASK) >> 8;
u64 cmask = (config & ARCH_PERFMON_EVENTSEL_CMASK) >> 24;
bool edge = (config & ARCH_PERFMON_EVENTSEL_EDGE);
bool pc = (config & ARCH_PERFMON_EVENTSEL_PIN_CONTROL);
bool any = (config & ARCH_PERFMON_EVENTSEL_ANY);
bool inv = (config & ARCH_PERFMON_EVENTSEL_INV);
ssize_t ret;
/*
* We have whole page size to spend and just little data
* to write, so we can safely use sprintf.
*/
ret = sprintf(page, "event=0x%02llx", event);
if (umask)
ret += sprintf(page + ret, ",umask=0x%02llx", umask);
if (edge)
ret += sprintf(page + ret, ",edge");
if (pc)
ret += sprintf(page + ret, ",pc");
if (any)
ret += sprintf(page + ret, ",any");
if (inv)
ret += sprintf(page + ret, ",inv");
if (cmask)
ret += sprintf(page + ret, ",cmask=0x%02llx", cmask);
ret += sprintf(page + ret, "\n");
return ret;
}
perf/x86: Add sysfs entry to freeze counters on SMI Currently, the SMIs are visible to all performance counters, because many users want to measure everything including SMIs. But in some cases, the SMI cycles should not be counted - for example, to calculate the cost of an SMI itself. So a knob is needed. When setting FREEZE_WHILE_SMM bit in IA32_DEBUGCTL, all performance counters will be effected. There is no way to do per-counter freeze on SMI. So it should not use the per-event interface (e.g. ioctl or event attribute) to set FREEZE_WHILE_SMM bit. Adds sysfs entry /sys/device/cpu/freeze_on_smi to set FREEZE_WHILE_SMM bit in IA32_DEBUGCTL. When set, freezes perfmon and trace messages while in SMM. Value has to be 0 or 1. It will be applied to all processors. Also serialize the entire setting so we don't get multiple concurrent threads trying to update to different values. Signed-off-by: Kan Liang <Kan.liang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: acme@kernel.org Cc: bp@alien8.de Cc: jolsa@kernel.org Link: http://lkml.kernel.org/r/1494600673-244667-1-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-05-12 14:51:13 +00:00
static struct attribute_group x86_pmu_attr_group;
static struct attribute_group x86_pmu_caps_group;
perf/x86: Add sysfs entry to freeze counters on SMI Currently, the SMIs are visible to all performance counters, because many users want to measure everything including SMIs. But in some cases, the SMI cycles should not be counted - for example, to calculate the cost of an SMI itself. So a knob is needed. When setting FREEZE_WHILE_SMM bit in IA32_DEBUGCTL, all performance counters will be effected. There is no way to do per-counter freeze on SMI. So it should not use the per-event interface (e.g. ioctl or event attribute) to set FREEZE_WHILE_SMM bit. Adds sysfs entry /sys/device/cpu/freeze_on_smi to set FREEZE_WHILE_SMM bit in IA32_DEBUGCTL. When set, freezes perfmon and trace messages while in SMM. Value has to be 0 or 1. It will be applied to all processors. Also serialize the entire setting so we don't get multiple concurrent threads trying to update to different values. Signed-off-by: Kan Liang <Kan.liang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: acme@kernel.org Cc: bp@alien8.de Cc: jolsa@kernel.org Link: http://lkml.kernel.org/r/1494600673-244667-1-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-05-12 14:51:13 +00:00
static int __init init_hw_perf_events(void)
{
struct x86_pmu_quirk *quirk;
int err;
perf: Do the big rename: Performance Counters -> Performance Events Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 10:02:48 +00:00
pr_info("Performance Events: ");
switch (boot_cpu_data.x86_vendor) {
case X86_VENDOR_INTEL:
err = intel_pmu_init();
break;
case X86_VENDOR_AMD:
err = amd_pmu_init();
break;
case X86_VENDOR_HYGON:
err = amd_pmu_init();
x86_pmu.name = "HYGON";
break;
x86/perf: Add hardware performance events support for Zhaoxin CPU. Zhaoxin CPU has provided facilities for monitoring performance via PMU (Performance Monitor Unit), but the functionality is unused so far. Therefore, add support for zhaoxin pmu to make performance related hardware events available. The PMU is mostly an Intel Architectural PerfMon-v2 with a novel errata for the ZXC line. It supports the following events: ----------------------------------------------------------------------------------------------------------------------------------- Event | Event | Umask | Description | Select | | ----------------------------------------------------------------------------------------------------------------------------------- cpu-cycles | 82h | 00h | unhalt core clock instructions | 00h | 00h | number of instructions at retirement. cache-references | 15h | 05h | number of fillq pushs at the current cycle. cache-misses | 1ah | 05h | number of l2 miss pushed by fillq. branch-instructions | 28h | 00h | counts the number of branch instructions retired. branch-misses | 29h | 00h | mispredicted branch instructions at retirement. bus-cycles | 83h | 00h | unhalt bus clock stalled-cycles-frontend | 01h | 01h | Increments each cycle the # of Uops issued by the RAT to RS. stalled-cycles-backend | 0fh | 04h | RS0/1/2/3/45 empty L1-dcache-loads | 68h | 05h | number of retire/commit load. L1-dcache-load-misses | 4bh | 05h | retired load uops whose data source followed an L1 miss. L1-dcache-stores | 69h | 06h | number of retire/commit Store,no LEA L1-dcache-store-misses | 62h | 05h | cache lines in M state evicted out of L1D due to Snoop HitM or dirty line replacement. L1-icache-loads | 00h | 03h | number of l1i cache access for valid normal fetch,including un-cacheable access. L1-icache-load-misses | 01h | 03h | number of l1i cache miss for valid normal fetch,including un-cacheable miss. L1-icache-prefetches | 0ah | 03h | number of prefetch. L1-icache-prefetch-misses | 0bh | 03h | number of prefetch miss. dTLB-loads | 68h | 05h | number of retire/commit load dTLB-load-misses | 2ch | 05h | number of load operations miss all level tlbs and cause a tablewalk. dTLB-stores | 69h | 06h | number of retire/commit Store,no LEA dTLB-store-misses | 30h | 05h | number of store operations miss all level tlbs and cause a tablewalk. dTLB-prefetches | 64h | 05h | number of hardware pte prefetch requests dispatched out of the prefetch FIFO. dTLB-prefetch-misses | 65h | 05h | number of hardware pte prefetch requests miss the l1d data cache. iTLB-load | 00h | 00h | actually counter instructions. iTLB-load-misses | 34h | 05h | number of code operations miss all level tlbs and cause a tablewalk. ----------------------------------------------------------------------------------------------------------------------------------- Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: CodyYao-oc <CodyYao-oc@zhaoxin.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/1586747669-4827-1-git-send-email-CodyYao-oc@zhaoxin.com
2020-04-13 03:14:29 +00:00
case X86_VENDOR_ZHAOXIN:
case X86_VENDOR_CENTAUR:
err = zhaoxin_pmu_init();
break;
default:
err = -ENOTSUPP;
}
if (err != 0) {
perf: Do the big rename: Performance Counters -> Performance Events Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 10:02:48 +00:00
pr_cont("no PMU driver, software events only.\n");
return 0;
}
pmu_check_apic();
/* sanity check that the hardware exists or is emulated */
if (!check_hw_exists())
return 0;
pr_cont("%s PMU driver.\n", x86_pmu.name);
x86_pmu.attr_rdpmc = 1; /* enable userspace RDPMC usage by default */
for (quirk = x86_pmu.quirks; quirk; quirk = quirk->next)
quirk->func();
if (!x86_pmu.intel_ctrl)
x86_pmu.intel_ctrl = (1 << x86_pmu.num_counters) - 1;
perf: Do the big rename: Performance Counters -> Performance Events Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 10:02:48 +00:00
perf_events_lapic_init();
register_nmi_handler(NMI_LOCAL, perf_event_nmi_handler, 0, "PMI");
unconstrained = (struct event_constraint)
__EVENT_CONSTRAINT(0, (1ULL << x86_pmu.num_counters) - 1,
0, x86_pmu.num_counters, 0, 0);
x86_pmu_format_group.attrs = x86_pmu.format_attrs;
perf/x86: Make hardware event translations available in sysfs Add support to display hardware events translations available through the sysfs. Add 'events' group attribute under the sysfs x86 PMU record with attribute/file for each hardware event. This patch adds only backbone for PMUs to display config under 'events' directory. The specific PMU support itself will come in next patches, however this is how the sysfs group will look like: # ls /sys/devices/cpu/events/ branch-instructions branch-misses bus-cycles cache-misses cache-references cpu-cycles instructions ref-cycles stalled-cycles-backend stalled-cycles-frontend The file - hw event ID mapping is: file hw event ID --------------------------------------------------------------- cpu-cycles PERF_COUNT_HW_CPU_CYCLES instructions PERF_COUNT_HW_INSTRUCTIONS cache-references PERF_COUNT_HW_CACHE_REFERENCES cache-misses PERF_COUNT_HW_CACHE_MISSES branch-instructions PERF_COUNT_HW_BRANCH_INSTRUCTIONS branch-misses PERF_COUNT_HW_BRANCH_MISSES bus-cycles PERF_COUNT_HW_BUS_CYCLES stalled-cycles-frontend PERF_COUNT_HW_STALLED_CYCLES_FRONTEND stalled-cycles-backend PERF_COUNT_HW_STALLED_CYCLES_BACKEND ref-cycles PERF_COUNT_HW_REF_CPU_CYCLES Each file in the 'events' directory contains the term translation for the symbolic hw event for the currently running cpu model. # cat /sys/devices/cpu/events/stalled-cycles-backend event=0xb1,umask=0x01,inv,cmask=0x01 Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Stephane Eranian <eranian@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349873598-12583-2-git-send-email-jolsa@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-10 12:53:11 +00:00
if (!x86_pmu.events_sysfs_show)
x86_pmu_events_group.attrs = &empty_attrs;
pmu.attr_update = x86_pmu.attr_update;
perf/x86: Add sysfs entry to freeze counters on SMI Currently, the SMIs are visible to all performance counters, because many users want to measure everything including SMIs. But in some cases, the SMI cycles should not be counted - for example, to calculate the cost of an SMI itself. So a knob is needed. When setting FREEZE_WHILE_SMM bit in IA32_DEBUGCTL, all performance counters will be effected. There is no way to do per-counter freeze on SMI. So it should not use the per-event interface (e.g. ioctl or event attribute) to set FREEZE_WHILE_SMM bit. Adds sysfs entry /sys/device/cpu/freeze_on_smi to set FREEZE_WHILE_SMM bit in IA32_DEBUGCTL. When set, freezes perfmon and trace messages while in SMM. Value has to be 0 or 1. It will be applied to all processors. Also serialize the entire setting so we don't get multiple concurrent threads trying to update to different values. Signed-off-by: Kan Liang <Kan.liang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: acme@kernel.org Cc: bp@alien8.de Cc: jolsa@kernel.org Link: http://lkml.kernel.org/r/1494600673-244667-1-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-05-12 14:51:13 +00:00
pr_info("... version: %d\n", x86_pmu.version);
pr_info("... bit width: %d\n", x86_pmu.cntval_bits);
pr_info("... generic registers: %d\n", x86_pmu.num_counters);
pr_info("... value mask: %016Lx\n", x86_pmu.cntval_mask);
pr_info("... max period: %016Lx\n", x86_pmu.max_period);
pr_info("... fixed-purpose events: %d\n", x86_pmu.num_counters_fixed);
pr_info("... event mask: %016Lx\n", x86_pmu.intel_ctrl);
/*
* Install callbacks. Core will call them for each online
* cpu.
*/
err = cpuhp_setup_state(CPUHP_PERF_X86_PREPARE, "perf/x86:prepare",
x86_pmu_prepare_cpu, x86_pmu_dead_cpu);
if (err)
return err;
err = cpuhp_setup_state(CPUHP_AP_PERF_X86_STARTING,
"perf/x86:starting", x86_pmu_starting_cpu,
x86_pmu_dying_cpu);
if (err)
goto out;
err = cpuhp_setup_state(CPUHP_AP_PERF_X86_ONLINE, "perf/x86:online",
x86_pmu_online_cpu, NULL);
if (err)
goto out1;
err = perf_pmu_register(&pmu, "cpu", PERF_TYPE_RAW);
if (err)
goto out2;
return 0;
out2:
cpuhp_remove_state(CPUHP_AP_PERF_X86_ONLINE);
out1:
cpuhp_remove_state(CPUHP_AP_PERF_X86_STARTING);
out:
cpuhp_remove_state(CPUHP_PERF_X86_PREPARE);
return err;
}
early_initcall(init_hw_perf_events);
perf: Do the big rename: Performance Counters -> Performance Events Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 10:02:48 +00:00
static inline void x86_pmu_read(struct perf_event *event)
{
if (x86_pmu.read)
return x86_pmu.read(event);
x86_perf_event_update(event);
}
/*
* Start group events scheduling transaction
* Set the flag to make pmu::enable() not perform the
* schedulability test, it will be performed at commit time
2015-09-04 03:07:45 +00:00
*
* We only support PERF_PMU_TXN_ADD transactions. Save the
* transaction flags but otherwise ignore non-PERF_PMU_TXN_ADD
* transactions.
*/
2015-09-04 03:07:45 +00:00
static void x86_pmu_start_txn(struct pmu *pmu, unsigned int txn_flags)
{
2015-09-04 03:07:45 +00:00
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
WARN_ON_ONCE(cpuc->txn_flags); /* txn already in flight */
cpuc->txn_flags = txn_flags;
if (txn_flags & ~PERF_PMU_TXN_ADD)
return;
perf_pmu_disable(pmu);
__this_cpu_write(cpu_hw_events.n_txn, 0);
}
/*
* Stop group events scheduling transaction
* Clear the flag and pmu::enable() will perform the
* schedulability test.
*/
static void x86_pmu_cancel_txn(struct pmu *pmu)
{
2015-09-04 03:07:45 +00:00
unsigned int txn_flags;
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
WARN_ON_ONCE(!cpuc->txn_flags); /* no txn in flight */
txn_flags = cpuc->txn_flags;
cpuc->txn_flags = 0;
if (txn_flags & ~PERF_PMU_TXN_ADD)
return;
perf_events: Fix event scheduling issues introduced by transactional API The transactional API patch between the generic and model-specific code introduced several important bugs with event scheduling, at least on X86. If you had pinned events, e.g., watchdog, and were over-committing the PMU, you would get bogus counts. The bug was showing up on Intel CPU because events would move around more often that on AMD. But the problem also existed on AMD, though harder to expose. The issues were: - group_sched_in() was missing a cancel_txn() in the error path - cpuc->n_added was not properly maintained, leading to missing actions in hw_perf_enable(), i.e., n_running being 0. You cannot update n_added until you know the transaction has succeeded. In case of failed transaction n_added was not adjusted back. - in case of failed transactions, event_sched_out() was called and eventually invoked x86_disable_event() to touch the HW reg. But with transactions, on X86, event_sched_in() does not touch HW registers, it simply collects events into a list. Thus, you could end up calling x86_disable_event() on a counter which did not correspond to the current event when idx != -1. The patch modifies the generic and X86 code to avoid all those problems. First, we keep track of the number of events added last. In case the transaction fails, we substract them from n_added. This approach is necessary (as opposed to delaying updates to n_added) because not all event updates use the transaction API, e.g., single events. Second, we encapsulate the event_sched_in() and event_sched_out() in group_sched_in() inside the transaction. That makes the operations symmetrical and you can also detect that you are inside a transaction and skip the HW reg access by checking cpuc->group_flag. With this patch, you can now overcommit the PMU even with pinned system-wide events present and still get valid counts. Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1274796225.5882.1389.camel@twins> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-25 14:23:10 +00:00
/*
* Truncate collected array by the number of events added in this
* transaction. See x86_pmu_add() and x86_pmu_*_txn().
perf_events: Fix event scheduling issues introduced by transactional API The transactional API patch between the generic and model-specific code introduced several important bugs with event scheduling, at least on X86. If you had pinned events, e.g., watchdog, and were over-committing the PMU, you would get bogus counts. The bug was showing up on Intel CPU because events would move around more often that on AMD. But the problem also existed on AMD, though harder to expose. The issues were: - group_sched_in() was missing a cancel_txn() in the error path - cpuc->n_added was not properly maintained, leading to missing actions in hw_perf_enable(), i.e., n_running being 0. You cannot update n_added until you know the transaction has succeeded. In case of failed transaction n_added was not adjusted back. - in case of failed transactions, event_sched_out() was called and eventually invoked x86_disable_event() to touch the HW reg. But with transactions, on X86, event_sched_in() does not touch HW registers, it simply collects events into a list. Thus, you could end up calling x86_disable_event() on a counter which did not correspond to the current event when idx != -1. The patch modifies the generic and X86 code to avoid all those problems. First, we keep track of the number of events added last. In case the transaction fails, we substract them from n_added. This approach is necessary (as opposed to delaying updates to n_added) because not all event updates use the transaction API, e.g., single events. Second, we encapsulate the event_sched_in() and event_sched_out() in group_sched_in() inside the transaction. That makes the operations symmetrical and you can also detect that you are inside a transaction and skip the HW reg access by checking cpuc->group_flag. With this patch, you can now overcommit the PMU even with pinned system-wide events present and still get valid counts. Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1274796225.5882.1389.camel@twins> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-25 14:23:10 +00:00
*/
__this_cpu_sub(cpu_hw_events.n_added, __this_cpu_read(cpu_hw_events.n_txn));
__this_cpu_sub(cpu_hw_events.n_events, __this_cpu_read(cpu_hw_events.n_txn));
perf_pmu_enable(pmu);
}
/*
* Commit group events scheduling transaction
* Perform the group schedulability test as a whole
* Return 0 if success
*
* Does not cancel the transaction on failure; expects the caller to do this.
*/
static int x86_pmu_commit_txn(struct pmu *pmu)
{
x86: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Acked-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-17 17:30:40 +00:00
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
int assign[X86_PMC_IDX_MAX];
int n, ret;
2015-09-04 03:07:45 +00:00
WARN_ON_ONCE(!cpuc->txn_flags); /* no txn in flight */
if (cpuc->txn_flags & ~PERF_PMU_TXN_ADD) {
cpuc->txn_flags = 0;
return 0;
}
n = cpuc->n_events;
if (!x86_pmu_initialized())
return -EAGAIN;
ret = x86_pmu.schedule_events(cpuc, n, assign);
if (ret)
return ret;
/*
* copy new assignment, now we know it is possible
* will be used by hw_perf_enable()
*/
memcpy(cpuc->assign, assign, n*sizeof(int));
2015-09-04 03:07:45 +00:00
cpuc->txn_flags = 0;
perf_pmu_enable(pmu);
return 0;
}
/*
* a fake_cpuc is used to validate event groups. Due to
* the extra reg logic, we need to also allocate a fake
* per_core and per_cpu structure. Otherwise, group events
* using extra reg may conflict without the kernel being
* able to catch this when the last event gets added to
* the group.
*/
static void free_fake_cpuc(struct cpu_hw_events *cpuc)
{
intel_cpuc_finish(cpuc);
kfree(cpuc);
}
static struct cpu_hw_events *allocate_fake_cpuc(void)
{
struct cpu_hw_events *cpuc;
int cpu = raw_smp_processor_id();
cpuc = kzalloc(sizeof(*cpuc), GFP_KERNEL);
if (!cpuc)
return ERR_PTR(-ENOMEM);
cpuc->is_fake = 1;
if (intel_cpuc_prepare(cpuc, cpu))
goto error;
return cpuc;
error:
free_fake_cpuc(cpuc);
return ERR_PTR(-ENOMEM);
}
/*
* validate that we can schedule this event
*/
static int validate_event(struct perf_event *event)
{
struct cpu_hw_events *fake_cpuc;
struct event_constraint *c;
int ret = 0;
fake_cpuc = allocate_fake_cpuc();
if (IS_ERR(fake_cpuc))
return PTR_ERR(fake_cpuc);
c = x86_pmu.get_event_constraints(fake_cpuc, 0, event);
if (!c || !c->weight)
ret = -EINVAL;
if (x86_pmu.put_event_constraints)
x86_pmu.put_event_constraints(fake_cpuc, event);
free_fake_cpuc(fake_cpuc);
return ret;
}
/*
* validate a single event group
*
* validation include:
* - check events are compatible which each other
* - events do not compete for the same counter
* - number of events <= number of counters
*
* validation ensures the group can be loaded onto the
* PMU if it was the only group available.
*/
static int validate_group(struct perf_event *event)
{
struct perf_event *leader = event->group_leader;
struct cpu_hw_events *fake_cpuc;
int ret = -EINVAL, n;
fake_cpuc = allocate_fake_cpuc();
if (IS_ERR(fake_cpuc))
return PTR_ERR(fake_cpuc);
/*
* the event is not yet connected with its
* siblings therefore we must first collect
* existing siblings, then add the new event
* before we can simulate the scheduling
*/
n = collect_events(fake_cpuc, leader, true);
if (n < 0)
goto out;
fake_cpuc->n_events = n;
n = collect_events(fake_cpuc, event, false);
if (n < 0)
goto out;
fake_cpuc->n_events = 0;
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 16:54:39 +00:00
ret = x86_pmu.schedule_events(fake_cpuc, n, NULL);
out:
free_fake_cpuc(fake_cpuc);
return ret;
}
static int x86_pmu_event_init(struct perf_event *event)
{
struct pmu *tmp;
int err;
switch (event->attr.type) {
case PERF_TYPE_RAW:
case PERF_TYPE_HARDWARE:
case PERF_TYPE_HW_CACHE:
break;
default:
return -ENOENT;
}
err = __x86_pmu_event_init(event);
if (!err) {
/*
* we temporarily connect event to its pmu
* such that validate_group() can classify
* it as an x86 event using is_x86_event()
*/
tmp = event->pmu;
event->pmu = &pmu;
if (event->group_leader != event)
err = validate_group(event);
else
err = validate_event(event);
event->pmu = tmp;
}
if (err) {
perf: Do the big rename: Performance Counters -> Performance Events Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 10:02:48 +00:00
if (event->destroy)
event->destroy(event);
}
if (READ_ONCE(x86_pmu.attr_rdpmc) &&
!(event->hw.flags & PERF_X86_EVENT_LARGE_PEBS))
event->hw.flags |= PERF_X86_EVENT_RDPMC_ALLOWED;
return err;
}
static void x86_pmu_event_mapped(struct perf_event *event, struct mm_struct *mm)
{
if (!(event->hw.flags & PERF_X86_EVENT_RDPMC_ALLOWED))
return;
/*
* This function relies on not being called concurrently in two
* tasks in the same mm. Otherwise one task could observe
* perf_rdpmc_allowed > 1 and return all the way back to
* userspace with CR4.PCE clear while another task is still
* doing on_each_cpu_mask() to propagate CR4.PCE.
*
* For now, this can't happen because all callers hold mmap_lock
* for write. If this changes, we'll need a different solution.
*/
mmap_assert_write_locked(mm);
if (atomic_inc_return(&mm->context.perf_rdpmc_allowed) == 1)
on_each_cpu_mask(mm_cpumask(mm), cr4_update_pce, NULL, 1);
}
static void x86_pmu_event_unmapped(struct perf_event *event, struct mm_struct *mm)
{
if (!(event->hw.flags & PERF_X86_EVENT_RDPMC_ALLOWED))
return;
if (atomic_dec_and_test(&mm->context.perf_rdpmc_allowed))
on_each_cpu_mask(mm_cpumask(mm), cr4_update_pce, NULL, 1);
}
static int x86_pmu_event_idx(struct perf_event *event)
{
struct hw_perf_event *hwc = &event->hw;
if (!(hwc->flags & PERF_X86_EVENT_RDPMC_ALLOWED))
return 0;
return hwc->event_base_rdpmc + 1;
}
static ssize_t get_attr_rdpmc(struct device *cdev,
struct device_attribute *attr,
char *buf)
{
return snprintf(buf, 40, "%d\n", x86_pmu.attr_rdpmc);
}
static ssize_t set_attr_rdpmc(struct device *cdev,
struct device_attribute *attr,
const char *buf, size_t count)
{
unsigned long val;
ssize_t ret;
ret = kstrtoul(buf, 0, &val);
if (ret)
return ret;
if (val > 2)
return -EINVAL;
if (x86_pmu.attr_rdpmc_broken)
return -ENOTSUPP;
if (val != x86_pmu.attr_rdpmc) {
/*
* Changing into or out of never available or always available,
* aka perf-event-bypassing mode. This path is extremely slow,
* but only root can trigger it, so it's okay.
*/
if (val == 0)
static_branch_inc(&rdpmc_never_available_key);
else if (x86_pmu.attr_rdpmc == 0)
static_branch_dec(&rdpmc_never_available_key);
if (val == 2)
static_branch_inc(&rdpmc_always_available_key);
else if (x86_pmu.attr_rdpmc == 2)
static_branch_dec(&rdpmc_always_available_key);
on_each_cpu(cr4_update_pce, NULL, 1);
x86_pmu.attr_rdpmc = val;
}
return count;
}
static DEVICE_ATTR(rdpmc, S_IRUSR | S_IWUSR, get_attr_rdpmc, set_attr_rdpmc);
static struct attribute *x86_pmu_attrs[] = {
&dev_attr_rdpmc.attr,
NULL,
};
static struct attribute_group x86_pmu_attr_group __ro_after_init = {
.attrs = x86_pmu_attrs,
};
static ssize_t max_precise_show(struct device *cdev,
struct device_attribute *attr,
char *buf)
{
return snprintf(buf, PAGE_SIZE, "%d\n", x86_pmu_max_precise());
}
static DEVICE_ATTR_RO(max_precise);
static struct attribute *x86_pmu_caps_attrs[] = {
&dev_attr_max_precise.attr,
NULL
};
static struct attribute_group x86_pmu_caps_group __ro_after_init = {
.name = "caps",
.attrs = x86_pmu_caps_attrs,
};
static const struct attribute_group *x86_pmu_attr_groups[] = {
&x86_pmu_attr_group,
&x86_pmu_format_group,
perf/x86: Make hardware event translations available in sysfs Add support to display hardware events translations available through the sysfs. Add 'events' group attribute under the sysfs x86 PMU record with attribute/file for each hardware event. This patch adds only backbone for PMUs to display config under 'events' directory. The specific PMU support itself will come in next patches, however this is how the sysfs group will look like: # ls /sys/devices/cpu/events/ branch-instructions branch-misses bus-cycles cache-misses cache-references cpu-cycles instructions ref-cycles stalled-cycles-backend stalled-cycles-frontend The file - hw event ID mapping is: file hw event ID --------------------------------------------------------------- cpu-cycles PERF_COUNT_HW_CPU_CYCLES instructions PERF_COUNT_HW_INSTRUCTIONS cache-references PERF_COUNT_HW_CACHE_REFERENCES cache-misses PERF_COUNT_HW_CACHE_MISSES branch-instructions PERF_COUNT_HW_BRANCH_INSTRUCTIONS branch-misses PERF_COUNT_HW_BRANCH_MISSES bus-cycles PERF_COUNT_HW_BUS_CYCLES stalled-cycles-frontend PERF_COUNT_HW_STALLED_CYCLES_FRONTEND stalled-cycles-backend PERF_COUNT_HW_STALLED_CYCLES_BACKEND ref-cycles PERF_COUNT_HW_REF_CPU_CYCLES Each file in the 'events' directory contains the term translation for the symbolic hw event for the currently running cpu model. # cat /sys/devices/cpu/events/stalled-cycles-backend event=0xb1,umask=0x01,inv,cmask=0x01 Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Stephane Eranian <eranian@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349873598-12583-2-git-send-email-jolsa@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-10 12:53:11 +00:00
&x86_pmu_events_group,
&x86_pmu_caps_group,
NULL,
};
static void x86_pmu_sched_task(struct perf_event_context *ctx, bool sched_in)
{
if (x86_pmu.sched_task)
x86_pmu.sched_task(ctx, sched_in);
}
static void x86_pmu_swap_task_ctx(struct perf_event_context *prev,
struct perf_event_context *next)
{
if (x86_pmu.swap_task_ctx)
x86_pmu.swap_task_ctx(prev, next);
}
void perf_check_microcode(void)
{
if (x86_pmu.check_microcode)
x86_pmu.check_microcode();
}
perf/x86: Add check_period PMU callback Vince (and later on Ravi) reported crashes in the BTS code during fuzzing with the following backtrace: general protection fault: 0000 [#1] SMP PTI ... RIP: 0010:perf_prepare_sample+0x8f/0x510 ... Call Trace: <IRQ> ? intel_pmu_drain_bts_buffer+0x194/0x230 intel_pmu_drain_bts_buffer+0x160/0x230 ? tick_nohz_irq_exit+0x31/0x40 ? smp_call_function_single_interrupt+0x48/0xe0 ? call_function_single_interrupt+0xf/0x20 ? call_function_single_interrupt+0xa/0x20 ? x86_schedule_events+0x1a0/0x2f0 ? x86_pmu_commit_txn+0xb4/0x100 ? find_busiest_group+0x47/0x5d0 ? perf_event_set_state.part.42+0x12/0x50 ? perf_mux_hrtimer_restart+0x40/0xb0 intel_pmu_disable_event+0xae/0x100 ? intel_pmu_disable_event+0xae/0x100 x86_pmu_stop+0x7a/0xb0 x86_pmu_del+0x57/0x120 event_sched_out.isra.101+0x83/0x180 group_sched_out.part.103+0x57/0xe0 ctx_sched_out+0x188/0x240 ctx_resched+0xa8/0xd0 __perf_event_enable+0x193/0x1e0 event_function+0x8e/0xc0 remote_function+0x41/0x50 flush_smp_call_function_queue+0x68/0x100 generic_smp_call_function_single_interrupt+0x13/0x30 smp_call_function_single_interrupt+0x3e/0xe0 call_function_single_interrupt+0xf/0x20 </IRQ> The reason is that while event init code does several checks for BTS events and prevents several unwanted config bits for BTS event (like precise_ip), the PERF_EVENT_IOC_PERIOD allows to create BTS event without those checks being done. Following sequence will cause the crash: If we create an 'almost' BTS event with precise_ip and callchains, and it into a BTS event it will crash the perf_prepare_sample() function because precise_ip events are expected to come in with callchain data initialized, but that's not the case for intel_pmu_drain_bts_buffer() caller. Adding a check_period callback to be called before the period is changed via PERF_EVENT_IOC_PERIOD. It will deny the change if the event would become BTS. Plus adding also the limit_period check as well. Reported-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: <stable@vger.kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20190204123532.GA4794@krava Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-02-04 12:35:32 +00:00
static int x86_pmu_check_period(struct perf_event *event, u64 value)
{
if (x86_pmu.check_period && x86_pmu.check_period(event, value))
return -EINVAL;
if (value && x86_pmu.limit_period) {
if (x86_pmu.limit_period(event, value) > value)
return -EINVAL;
}
return 0;
}
static int x86_pmu_aux_output_match(struct perf_event *event)
{
if (!(pmu.capabilities & PERF_PMU_CAP_AUX_OUTPUT))
return 0;
if (x86_pmu.aux_output_match)
return x86_pmu.aux_output_match(event);
return 0;
}
static struct pmu pmu = {
.pmu_enable = x86_pmu_enable,
.pmu_disable = x86_pmu_disable,
2010-06-16 12:37:10 +00:00
.attr_groups = x86_pmu_attr_groups,
.event_init = x86_pmu_event_init,
2010-06-16 12:37:10 +00:00
.event_mapped = x86_pmu_event_mapped,
.event_unmapped = x86_pmu_event_unmapped,
.add = x86_pmu_add,
.del = x86_pmu_del,
.start = x86_pmu_start,
.stop = x86_pmu_stop,
.read = x86_pmu_read,
2010-06-16 12:37:10 +00:00
.start_txn = x86_pmu_start_txn,
.cancel_txn = x86_pmu_cancel_txn,
.commit_txn = x86_pmu_commit_txn,
.event_idx = x86_pmu_event_idx,
.sched_task = x86_pmu_sched_task,
.swap_task_ctx = x86_pmu_swap_task_ctx,
perf/x86: Add check_period PMU callback Vince (and later on Ravi) reported crashes in the BTS code during fuzzing with the following backtrace: general protection fault: 0000 [#1] SMP PTI ... RIP: 0010:perf_prepare_sample+0x8f/0x510 ... Call Trace: <IRQ> ? intel_pmu_drain_bts_buffer+0x194/0x230 intel_pmu_drain_bts_buffer+0x160/0x230 ? tick_nohz_irq_exit+0x31/0x40 ? smp_call_function_single_interrupt+0x48/0xe0 ? call_function_single_interrupt+0xf/0x20 ? call_function_single_interrupt+0xa/0x20 ? x86_schedule_events+0x1a0/0x2f0 ? x86_pmu_commit_txn+0xb4/0x100 ? find_busiest_group+0x47/0x5d0 ? perf_event_set_state.part.42+0x12/0x50 ? perf_mux_hrtimer_restart+0x40/0xb0 intel_pmu_disable_event+0xae/0x100 ? intel_pmu_disable_event+0xae/0x100 x86_pmu_stop+0x7a/0xb0 x86_pmu_del+0x57/0x120 event_sched_out.isra.101+0x83/0x180 group_sched_out.part.103+0x57/0xe0 ctx_sched_out+0x188/0x240 ctx_resched+0xa8/0xd0 __perf_event_enable+0x193/0x1e0 event_function+0x8e/0xc0 remote_function+0x41/0x50 flush_smp_call_function_queue+0x68/0x100 generic_smp_call_function_single_interrupt+0x13/0x30 smp_call_function_single_interrupt+0x3e/0xe0 call_function_single_interrupt+0xf/0x20 </IRQ> The reason is that while event init code does several checks for BTS events and prevents several unwanted config bits for BTS event (like precise_ip), the PERF_EVENT_IOC_PERIOD allows to create BTS event without those checks being done. Following sequence will cause the crash: If we create an 'almost' BTS event with precise_ip and callchains, and it into a BTS event it will crash the perf_prepare_sample() function because precise_ip events are expected to come in with callchain data initialized, but that's not the case for intel_pmu_drain_bts_buffer() caller. Adding a check_period callback to be called before the period is changed via PERF_EVENT_IOC_PERIOD. It will deny the change if the event would become BTS. Plus adding also the limit_period check as well. Reported-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: <stable@vger.kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20190204123532.GA4794@krava Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-02-04 12:35:32 +00:00
.check_period = x86_pmu_check_period,
.aux_output_match = x86_pmu_aux_output_match,
};
void arch_perf_update_userpage(struct perf_event *event,
struct perf_event_mmap_page *userpg, u64 now)
{
struct cyc2ns_data data;
u64 offset;
perf: Fix capabilities bitfield compatibility in 'struct perf_event_mmap_page' Solve the problems around the broken definition of perf_event_mmap_page:: cap_usr_time and cap_usr_rdpmc fields which used to overlap, partially fixed by: 860f085b74e9 ("perf: Fix broken union in 'struct perf_event_mmap_page'") The problem with the fix (merged in v3.12-rc1 and not yet released officially), noticed by Vince Weaver is that the new behavior is not detectable by new user-space, and that due to the reuse of the field names it's easy to mis-compile a binary if old headers are used on a new kernel or new headers are used on an old kernel. To solve all that make this change explicit, detectable and self-contained, by iterating the ABI the following way: - Always clear bit 0, and rename it to usrpage->cap_bit0, to at least not confuse old user-space binaries. RDPMC will be marked as unavailable to old binaries but that's within the ABI, this is a capability bit. - Rename bit 1 to ->cap_bit0_is_deprecated and always set it to 1, so new libraries can reliably detect that bit 0 is deprecated and perma-zero without having to check the kernel version. - Use bits 2, 3, 4 for the newly defined, correct functionality: cap_user_rdpmc : 1, /* The RDPMC instruction can be used to read counts */ cap_user_time : 1, /* The time_* fields are used */ cap_user_time_zero : 1, /* The time_zero field is used */ - Rename all the bitfield names in perf_event.h to be different from the old names, to make sure it's not possible to mis-compile it accidentally with old assumptions. The 'size' field can then be used in the future to add new fields and it will act as a natural ABI version indicator as well. Also adjust tools/perf/ userspace for the new definitions, noticed by Adrian Hunter. Reported-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Also-Fixed-by: Adrian Hunter <adrian.hunter@intel.com> Link: http://lkml.kernel.org/n/tip-zr03yxjrpXesOzzupszqglbv@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-19 08:16:42 +00:00
userpg->cap_user_time = 0;
userpg->cap_user_time_zero = 0;
userpg->cap_user_rdpmc =
!!(event->hw.flags & PERF_X86_EVENT_RDPMC_ALLOWED);
userpg->pmc_width = x86_pmu.cntval_bits;
if (!using_native_sched_clock() || !sched_clock_stable())
return;
cyc2ns_read_begin(&data);
offset = data.cyc2ns_offset + __sched_clock_offset;
perf: Add per event clockid support While thinking on the whole clock discussion it occurred to me we have two distinct uses of time: 1) the tracking of event/ctx/cgroup enabled/running/stopped times which includes the self-monitoring support in struct perf_event_mmap_page. 2) the actual timestamps visible in the data records. And we've been conflating them. The first is all about tracking time deltas, nobody should really care in what time base that happens, its all relative information, as long as its internally consistent it works. The second however is what people are worried about when having to merge their data with external sources. And here we have the discussion on MONOTONIC vs MONOTONIC_RAW etc.. Where MONOTONIC is good for correlating between machines (static offset), MONOTNIC_RAW is required for correlating against a fixed rate hardware clock. This means configurability; now 1) makes that hard because it needs to be internally consistent across groups of unrelated events; which is why we had to have a global perf_clock(). However, for 2) it doesn't really matter, perf itself doesn't care what it writes into the buffer. The below patch makes the distinction between these two cases by adding perf_event_clock() which is used for the second case. It further makes this configurable on a per-event basis, but adds a few sanity checks such that we cannot combine events with different clocks in confusing ways. And since we then have per-event configurability we might as well retain the 'legacy' behaviour as a default. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-20 13:05:38 +00:00
/*
* Internal timekeeping for enabled/running/stopped times
* is always in the local_clock domain.
*/
perf: Fix capabilities bitfield compatibility in 'struct perf_event_mmap_page' Solve the problems around the broken definition of perf_event_mmap_page:: cap_usr_time and cap_usr_rdpmc fields which used to overlap, partially fixed by: 860f085b74e9 ("perf: Fix broken union in 'struct perf_event_mmap_page'") The problem with the fix (merged in v3.12-rc1 and not yet released officially), noticed by Vince Weaver is that the new behavior is not detectable by new user-space, and that due to the reuse of the field names it's easy to mis-compile a binary if old headers are used on a new kernel or new headers are used on an old kernel. To solve all that make this change explicit, detectable and self-contained, by iterating the ABI the following way: - Always clear bit 0, and rename it to usrpage->cap_bit0, to at least not confuse old user-space binaries. RDPMC will be marked as unavailable to old binaries but that's within the ABI, this is a capability bit. - Rename bit 1 to ->cap_bit0_is_deprecated and always set it to 1, so new libraries can reliably detect that bit 0 is deprecated and perma-zero without having to check the kernel version. - Use bits 2, 3, 4 for the newly defined, correct functionality: cap_user_rdpmc : 1, /* The RDPMC instruction can be used to read counts */ cap_user_time : 1, /* The time_* fields are used */ cap_user_time_zero : 1, /* The time_zero field is used */ - Rename all the bitfield names in perf_event.h to be different from the old names, to make sure it's not possible to mis-compile it accidentally with old assumptions. The 'size' field can then be used in the future to add new fields and it will act as a natural ABI version indicator as well. Also adjust tools/perf/ userspace for the new definitions, noticed by Adrian Hunter. Reported-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Also-Fixed-by: Adrian Hunter <adrian.hunter@intel.com> Link: http://lkml.kernel.org/n/tip-zr03yxjrpXesOzzupszqglbv@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-19 08:16:42 +00:00
userpg->cap_user_time = 1;
userpg->time_mult = data.cyc2ns_mul;
userpg->time_shift = data.cyc2ns_shift;
userpg->time_offset = offset - now;
perf: Add per event clockid support While thinking on the whole clock discussion it occurred to me we have two distinct uses of time: 1) the tracking of event/ctx/cgroup enabled/running/stopped times which includes the self-monitoring support in struct perf_event_mmap_page. 2) the actual timestamps visible in the data records. And we've been conflating them. The first is all about tracking time deltas, nobody should really care in what time base that happens, its all relative information, as long as its internally consistent it works. The second however is what people are worried about when having to merge their data with external sources. And here we have the discussion on MONOTONIC vs MONOTONIC_RAW etc.. Where MONOTONIC is good for correlating between machines (static offset), MONOTNIC_RAW is required for correlating against a fixed rate hardware clock. This means configurability; now 1) makes that hard because it needs to be internally consistent across groups of unrelated events; which is why we had to have a global perf_clock(). However, for 2) it doesn't really matter, perf itself doesn't care what it writes into the buffer. The below patch makes the distinction between these two cases by adding perf_event_clock() which is used for the second case. It further makes this configurable on a per-event basis, but adds a few sanity checks such that we cannot combine events with different clocks in confusing ways. And since we then have per-event configurability we might as well retain the 'legacy' behaviour as a default. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-20 13:05:38 +00:00
/*
* cap_user_time_zero doesn't make sense when we're using a different
* time base for the records.
*/
if (!event->attr.use_clockid) {
perf: Add per event clockid support While thinking on the whole clock discussion it occurred to me we have two distinct uses of time: 1) the tracking of event/ctx/cgroup enabled/running/stopped times which includes the self-monitoring support in struct perf_event_mmap_page. 2) the actual timestamps visible in the data records. And we've been conflating them. The first is all about tracking time deltas, nobody should really care in what time base that happens, its all relative information, as long as its internally consistent it works. The second however is what people are worried about when having to merge their data with external sources. And here we have the discussion on MONOTONIC vs MONOTONIC_RAW etc.. Where MONOTONIC is good for correlating between machines (static offset), MONOTNIC_RAW is required for correlating against a fixed rate hardware clock. This means configurability; now 1) makes that hard because it needs to be internally consistent across groups of unrelated events; which is why we had to have a global perf_clock(). However, for 2) it doesn't really matter, perf itself doesn't care what it writes into the buffer. The below patch makes the distinction between these two cases by adding perf_event_clock() which is used for the second case. It further makes this configurable on a per-event basis, but adds a few sanity checks such that we cannot combine events with different clocks in confusing ways. And since we then have per-event configurability we might as well retain the 'legacy' behaviour as a default. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-20 13:05:38 +00:00
userpg->cap_user_time_zero = 1;
userpg->time_zero = offset;
perf: Add per event clockid support While thinking on the whole clock discussion it occurred to me we have two distinct uses of time: 1) the tracking of event/ctx/cgroup enabled/running/stopped times which includes the self-monitoring support in struct perf_event_mmap_page. 2) the actual timestamps visible in the data records. And we've been conflating them. The first is all about tracking time deltas, nobody should really care in what time base that happens, its all relative information, as long as its internally consistent it works. The second however is what people are worried about when having to merge their data with external sources. And here we have the discussion on MONOTONIC vs MONOTONIC_RAW etc.. Where MONOTONIC is good for correlating between machines (static offset), MONOTNIC_RAW is required for correlating against a fixed rate hardware clock. This means configurability; now 1) makes that hard because it needs to be internally consistent across groups of unrelated events; which is why we had to have a global perf_clock(). However, for 2) it doesn't really matter, perf itself doesn't care what it writes into the buffer. The below patch makes the distinction between these two cases by adding perf_event_clock() which is used for the second case. It further makes this configurable on a per-event basis, but adds a few sanity checks such that we cannot combine events with different clocks in confusing ways. And since we then have per-event configurability we might as well retain the 'legacy' behaviour as a default. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-20 13:05:38 +00:00
}
cyc2ns_read_end();
}
perf/x86: Make perf callchains work without CONFIG_FRAME_POINTER Currently perf callchain doesn't work well with ORC unwinder when sampling from trace point. We'll get useless in kernel callchain like this: perf 6429 [000] 22.498450: kmem:mm_page_alloc: page=0x176a17 pfn=1534487 order=0 migratetype=0 gfp_flags=GFP_KERNEL ffffffffbe23e32e __alloc_pages_nodemask+0x22e (/lib/modules/5.1.0-rc3+/build/vmlinux) 7efdf7f7d3e8 __poll+0x18 (/usr/lib64/libc-2.28.so) 5651468729c1 [unknown] (/usr/bin/perf) 5651467ee82a main+0x69a (/usr/bin/perf) 7efdf7eaf413 __libc_start_main+0xf3 (/usr/lib64/libc-2.28.so) 5541f689495641d7 [unknown] ([unknown]) The root cause is that, for trace point events, it doesn't provide a real snapshot of the hardware registers. Instead perf tries to get required caller's registers and compose a fake register snapshot which suppose to contain enough information for start a unwinding. However without CONFIG_FRAME_POINTER, if failed to get caller's BP as the frame pointer, so current frame pointer is returned instead. We get a invalid register combination which confuse the unwinder, and end the stacktrace early. So in such case just don't try dump BP, and let the unwinder start directly when the register is not a real snapshot. Use SP as the skip mark, unwinder will skip all the frames until it meet the frame of the trace point caller. Tested with frame pointer unwinder and ORC unwinder, this makes perf callchain get the full kernel space stacktrace again like this: perf 6503 [000] 1567.570191: kmem:mm_page_alloc: page=0x16c904 pfn=1493252 order=0 migratetype=0 gfp_flags=GFP_KERNEL ffffffffb523e2ae __alloc_pages_nodemask+0x22e (/lib/modules/5.1.0-rc3+/build/vmlinux) ffffffffb52383bd __get_free_pages+0xd (/lib/modules/5.1.0-rc3+/build/vmlinux) ffffffffb52fd28a __pollwait+0x8a (/lib/modules/5.1.0-rc3+/build/vmlinux) ffffffffb521426f perf_poll+0x2f (/lib/modules/5.1.0-rc3+/build/vmlinux) ffffffffb52fe3e2 do_sys_poll+0x252 (/lib/modules/5.1.0-rc3+/build/vmlinux) ffffffffb52ff027 __x64_sys_poll+0x37 (/lib/modules/5.1.0-rc3+/build/vmlinux) ffffffffb500418b do_syscall_64+0x5b (/lib/modules/5.1.0-rc3+/build/vmlinux) ffffffffb5a0008c entry_SYSCALL_64_after_hwframe+0x44 (/lib/modules/5.1.0-rc3+/build/vmlinux) 7f71e92d03e8 __poll+0x18 (/usr/lib64/libc-2.28.so) 55a22960d9c1 [unknown] (/usr/bin/perf) 55a22958982a main+0x69a (/usr/bin/perf) 7f71e9202413 __libc_start_main+0xf3 (/usr/lib64/libc-2.28.so) 5541f689495641d7 [unknown] ([unknown]) Co-developed-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Kairui Song <kasong@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Young <dyoung@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190422162652.15483-1-kasong@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-22 16:26:52 +00:00
/*
* Determine whether the regs were taken from an irq/exception handler rather
* than from perf_arch_fetch_caller_regs().
*/
static bool perf_hw_regs(struct pt_regs *regs)
{
return regs->flags & X86_EFLAGS_FIXED;
}
void
perf_callchain_kernel(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs)
{
struct unwind_state state;
unsigned long addr;
if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) {
/* TODO: We don't support guest os callchain now */
return;
}
if (perf_callchain_store(entry, regs->ip))
return;
if (perf_hw_regs(regs))
perf/x86: Make perf callchains work without CONFIG_FRAME_POINTER Currently perf callchain doesn't work well with ORC unwinder when sampling from trace point. We'll get useless in kernel callchain like this: perf 6429 [000] 22.498450: kmem:mm_page_alloc: page=0x176a17 pfn=1534487 order=0 migratetype=0 gfp_flags=GFP_KERNEL ffffffffbe23e32e __alloc_pages_nodemask+0x22e (/lib/modules/5.1.0-rc3+/build/vmlinux) 7efdf7f7d3e8 __poll+0x18 (/usr/lib64/libc-2.28.so) 5651468729c1 [unknown] (/usr/bin/perf) 5651467ee82a main+0x69a (/usr/bin/perf) 7efdf7eaf413 __libc_start_main+0xf3 (/usr/lib64/libc-2.28.so) 5541f689495641d7 [unknown] ([unknown]) The root cause is that, for trace point events, it doesn't provide a real snapshot of the hardware registers. Instead perf tries to get required caller's registers and compose a fake register snapshot which suppose to contain enough information for start a unwinding. However without CONFIG_FRAME_POINTER, if failed to get caller's BP as the frame pointer, so current frame pointer is returned instead. We get a invalid register combination which confuse the unwinder, and end the stacktrace early. So in such case just don't try dump BP, and let the unwinder start directly when the register is not a real snapshot. Use SP as the skip mark, unwinder will skip all the frames until it meet the frame of the trace point caller. Tested with frame pointer unwinder and ORC unwinder, this makes perf callchain get the full kernel space stacktrace again like this: perf 6503 [000] 1567.570191: kmem:mm_page_alloc: page=0x16c904 pfn=1493252 order=0 migratetype=0 gfp_flags=GFP_KERNEL ffffffffb523e2ae __alloc_pages_nodemask+0x22e (/lib/modules/5.1.0-rc3+/build/vmlinux) ffffffffb52383bd __get_free_pages+0xd (/lib/modules/5.1.0-rc3+/build/vmlinux) ffffffffb52fd28a __pollwait+0x8a (/lib/modules/5.1.0-rc3+/build/vmlinux) ffffffffb521426f perf_poll+0x2f (/lib/modules/5.1.0-rc3+/build/vmlinux) ffffffffb52fe3e2 do_sys_poll+0x252 (/lib/modules/5.1.0-rc3+/build/vmlinux) ffffffffb52ff027 __x64_sys_poll+0x37 (/lib/modules/5.1.0-rc3+/build/vmlinux) ffffffffb500418b do_syscall_64+0x5b (/lib/modules/5.1.0-rc3+/build/vmlinux) ffffffffb5a0008c entry_SYSCALL_64_after_hwframe+0x44 (/lib/modules/5.1.0-rc3+/build/vmlinux) 7f71e92d03e8 __poll+0x18 (/usr/lib64/libc-2.28.so) 55a22960d9c1 [unknown] (/usr/bin/perf) 55a22958982a main+0x69a (/usr/bin/perf) 7f71e9202413 __libc_start_main+0xf3 (/usr/lib64/libc-2.28.so) 5541f689495641d7 [unknown] ([unknown]) Co-developed-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Kairui Song <kasong@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Young <dyoung@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190422162652.15483-1-kasong@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-22 16:26:52 +00:00
unwind_start(&state, current, regs, NULL);
else
perf/x86: Make perf callchains work without CONFIG_FRAME_POINTER Currently perf callchain doesn't work well with ORC unwinder when sampling from trace point. We'll get useless in kernel callchain like this: perf 6429 [000] 22.498450: kmem:mm_page_alloc: page=0x176a17 pfn=1534487 order=0 migratetype=0 gfp_flags=GFP_KERNEL ffffffffbe23e32e __alloc_pages_nodemask+0x22e (/lib/modules/5.1.0-rc3+/build/vmlinux) 7efdf7f7d3e8 __poll+0x18 (/usr/lib64/libc-2.28.so) 5651468729c1 [unknown] (/usr/bin/perf) 5651467ee82a main+0x69a (/usr/bin/perf) 7efdf7eaf413 __libc_start_main+0xf3 (/usr/lib64/libc-2.28.so) 5541f689495641d7 [unknown] ([unknown]) The root cause is that, for trace point events, it doesn't provide a real snapshot of the hardware registers. Instead perf tries to get required caller's registers and compose a fake register snapshot which suppose to contain enough information for start a unwinding. However without CONFIG_FRAME_POINTER, if failed to get caller's BP as the frame pointer, so current frame pointer is returned instead. We get a invalid register combination which confuse the unwinder, and end the stacktrace early. So in such case just don't try dump BP, and let the unwinder start directly when the register is not a real snapshot. Use SP as the skip mark, unwinder will skip all the frames until it meet the frame of the trace point caller. Tested with frame pointer unwinder and ORC unwinder, this makes perf callchain get the full kernel space stacktrace again like this: perf 6503 [000] 1567.570191: kmem:mm_page_alloc: page=0x16c904 pfn=1493252 order=0 migratetype=0 gfp_flags=GFP_KERNEL ffffffffb523e2ae __alloc_pages_nodemask+0x22e (/lib/modules/5.1.0-rc3+/build/vmlinux) ffffffffb52383bd __get_free_pages+0xd (/lib/modules/5.1.0-rc3+/build/vmlinux) ffffffffb52fd28a __pollwait+0x8a (/lib/modules/5.1.0-rc3+/build/vmlinux) ffffffffb521426f perf_poll+0x2f (/lib/modules/5.1.0-rc3+/build/vmlinux) ffffffffb52fe3e2 do_sys_poll+0x252 (/lib/modules/5.1.0-rc3+/build/vmlinux) ffffffffb52ff027 __x64_sys_poll+0x37 (/lib/modules/5.1.0-rc3+/build/vmlinux) ffffffffb500418b do_syscall_64+0x5b (/lib/modules/5.1.0-rc3+/build/vmlinux) ffffffffb5a0008c entry_SYSCALL_64_after_hwframe+0x44 (/lib/modules/5.1.0-rc3+/build/vmlinux) 7f71e92d03e8 __poll+0x18 (/usr/lib64/libc-2.28.so) 55a22960d9c1 [unknown] (/usr/bin/perf) 55a22958982a main+0x69a (/usr/bin/perf) 7f71e9202413 __libc_start_main+0xf3 (/usr/lib64/libc-2.28.so) 5541f689495641d7 [unknown] ([unknown]) Co-developed-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Kairui Song <kasong@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Young <dyoung@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190422162652.15483-1-kasong@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-22 16:26:52 +00:00
unwind_start(&state, current, NULL, (void *)regs->sp);
perf/x86: Make perf callchains work without CONFIG_FRAME_POINTER Currently perf callchain doesn't work well with ORC unwinder when sampling from trace point. We'll get useless in kernel callchain like this: perf 6429 [000] 22.498450: kmem:mm_page_alloc: page=0x176a17 pfn=1534487 order=0 migratetype=0 gfp_flags=GFP_KERNEL ffffffffbe23e32e __alloc_pages_nodemask+0x22e (/lib/modules/5.1.0-rc3+/build/vmlinux) 7efdf7f7d3e8 __poll+0x18 (/usr/lib64/libc-2.28.so) 5651468729c1 [unknown] (/usr/bin/perf) 5651467ee82a main+0x69a (/usr/bin/perf) 7efdf7eaf413 __libc_start_main+0xf3 (/usr/lib64/libc-2.28.so) 5541f689495641d7 [unknown] ([unknown]) The root cause is that, for trace point events, it doesn't provide a real snapshot of the hardware registers. Instead perf tries to get required caller's registers and compose a fake register snapshot which suppose to contain enough information for start a unwinding. However without CONFIG_FRAME_POINTER, if failed to get caller's BP as the frame pointer, so current frame pointer is returned instead. We get a invalid register combination which confuse the unwinder, and end the stacktrace early. So in such case just don't try dump BP, and let the unwinder start directly when the register is not a real snapshot. Use SP as the skip mark, unwinder will skip all the frames until it meet the frame of the trace point caller. Tested with frame pointer unwinder and ORC unwinder, this makes perf callchain get the full kernel space stacktrace again like this: perf 6503 [000] 1567.570191: kmem:mm_page_alloc: page=0x16c904 pfn=1493252 order=0 migratetype=0 gfp_flags=GFP_KERNEL ffffffffb523e2ae __alloc_pages_nodemask+0x22e (/lib/modules/5.1.0-rc3+/build/vmlinux) ffffffffb52383bd __get_free_pages+0xd (/lib/modules/5.1.0-rc3+/build/vmlinux) ffffffffb52fd28a __pollwait+0x8a (/lib/modules/5.1.0-rc3+/build/vmlinux) ffffffffb521426f perf_poll+0x2f (/lib/modules/5.1.0-rc3+/build/vmlinux) ffffffffb52fe3e2 do_sys_poll+0x252 (/lib/modules/5.1.0-rc3+/build/vmlinux) ffffffffb52ff027 __x64_sys_poll+0x37 (/lib/modules/5.1.0-rc3+/build/vmlinux) ffffffffb500418b do_syscall_64+0x5b (/lib/modules/5.1.0-rc3+/build/vmlinux) ffffffffb5a0008c entry_SYSCALL_64_after_hwframe+0x44 (/lib/modules/5.1.0-rc3+/build/vmlinux) 7f71e92d03e8 __poll+0x18 (/usr/lib64/libc-2.28.so) 55a22960d9c1 [unknown] (/usr/bin/perf) 55a22958982a main+0x69a (/usr/bin/perf) 7f71e9202413 __libc_start_main+0xf3 (/usr/lib64/libc-2.28.so) 5541f689495641d7 [unknown] ([unknown]) Co-developed-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Kairui Song <kasong@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Young <dyoung@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190422162652.15483-1-kasong@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-22 16:26:52 +00:00
for (; !unwind_done(&state); unwind_next_frame(&state)) {
addr = unwind_get_return_address(&state);
if (!addr || perf_callchain_store(entry, addr))
return;
}
}
static inline int
valid_user_frame(const void __user *fp, unsigned long size)
{
return (__range_not_ok(fp, size, TASK_SIZE) == 0);
}
static unsigned long get_segment_base(unsigned int segment)
{
struct desc_struct *desc;
unsigned int idx = segment >> 3;
if ((segment & SEGMENT_TI_MASK) == SEGMENT_LDT) {
#ifdef CONFIG_MODIFY_LDT_SYSCALL
struct ldt_struct *ldt;
/* IRQs are off, so this synchronizes with smp_store_release */
ldt = READ_ONCE(current->active_mm->context.ldt);
if (!ldt || idx >= ldt->nr_entries)
return 0;
desc = &ldt->entries[idx];
#else
return 0;
#endif
} else {
if (idx >= GDT_ENTRIES)
return 0;
desc = raw_cpu_ptr(gdt_page.gdt) + idx;
}
return get_desc_base(desc);
}
#ifdef CONFIG_IA32_EMULATION
compat: Move compat_timespec/ timeval to compat_time.h All the current architecture specific defines for these are the same. Refactor these common defines to a common header file. The new common linux/compat_time.h is also useful as it will eventually be used to hold all the defines that are needed for compat time types that support non y2038 safe types. New architectures need not have to define these new types as they will only use new y2038 safe syscalls. This file can be deleted after y2038 when we stop supporting non y2038 safe syscalls. The patch also requires an operation similar to: git grep "asm/compat\.h" | cut -d ":" -f 1 | xargs -n 1 sed -i -e "s%asm/compat.h%linux/compat.h%g" Cc: acme@kernel.org Cc: benh@kernel.crashing.org Cc: borntraeger@de.ibm.com Cc: catalin.marinas@arm.com Cc: cmetcalf@mellanox.com Cc: cohuck@redhat.com Cc: davem@davemloft.net Cc: deller@gmx.de Cc: devel@driverdev.osuosl.org Cc: gerald.schaefer@de.ibm.com Cc: gregkh@linuxfoundation.org Cc: heiko.carstens@de.ibm.com Cc: hoeppner@linux.vnet.ibm.com Cc: hpa@zytor.com Cc: jejb@parisc-linux.org Cc: jwi@linux.vnet.ibm.com Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-s390@vger.kernel.org Cc: mark.rutland@arm.com Cc: mingo@redhat.com Cc: mpe@ellerman.id.au Cc: oberpar@linux.vnet.ibm.com Cc: oprofile-list@lists.sf.net Cc: paulus@samba.org Cc: peterz@infradead.org Cc: ralf@linux-mips.org Cc: rostedt@goodmis.org Cc: rric@kernel.org Cc: schwidefsky@de.ibm.com Cc: sebott@linux.vnet.ibm.com Cc: sparclinux@vger.kernel.org Cc: sth@linux.vnet.ibm.com Cc: ubraun@linux.vnet.ibm.com Cc: will.deacon@arm.com Cc: x86@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: James Hogan <jhogan@kernel.org> Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-14 04:03:25 +00:00
#include <linux/compat.h>
static inline int
perf_callchain_user32(struct pt_regs *regs, struct perf_callchain_entry_ctx *entry)
perf_counter: x86: Fix call-chain support to use NMI-safe methods __copy_from_user_inatomic() isn't NMI safe in that it can trigger the page fault handler which is another trap and its return path invokes IRET which will also close the NMI context. Therefore use a GUP based approach to copy the stack frames over. We tried an alternative solution as well: we used a forward ported version of Mathieu Desnoyers's "NMI safe INT3 and Page Fault" patch that modifies the exception return path to use an open-coded IRET with explicit stack unrolling and TF checking. This didnt work as it interacted with faulting user-space instructions, causing them not to restart properly, which corrupts user-space registers. Solving that would probably involve disassembling those instructions and backtracing the RIP. But even without that, the code was deemed rather complex to the already non-trivial x86 entry assembly code, so instead we went for this GUP based method that does a software-walk of the pagetables. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Nick Piggin <npiggin@suse.de> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-15 11:07:24 +00:00
{
/* 32-bit process in 64-bit kernel. */
unsigned long ss_base, cs_base;
struct stack_frame_ia32 frame;
const struct stack_frame_ia32 __user *fp;
perf_counter: x86: Fix call-chain support to use NMI-safe methods __copy_from_user_inatomic() isn't NMI safe in that it can trigger the page fault handler which is another trap and its return path invokes IRET which will also close the NMI context. Therefore use a GUP based approach to copy the stack frames over. We tried an alternative solution as well: we used a forward ported version of Mathieu Desnoyers's "NMI safe INT3 and Page Fault" patch that modifies the exception return path to use an open-coded IRET with explicit stack unrolling and TF checking. This didnt work as it interacted with faulting user-space instructions, causing them not to restart properly, which corrupts user-space registers. Solving that would probably involve disassembling those instructions and backtracing the RIP. But even without that, the code was deemed rather complex to the already non-trivial x86 entry assembly code, so instead we went for this GUP based method that does a software-walk of the pagetables. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Nick Piggin <npiggin@suse.de> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-15 11:07:24 +00:00
if (!test_thread_flag(TIF_IA32))
return 0;
cs_base = get_segment_base(regs->cs);
ss_base = get_segment_base(regs->ss);
fp = compat_ptr(ss_base + regs->bp);
perf/x86: Optimize stack walk user accesses Change the perf user stack walking to use the new __copy_from_user_nmi(), and split each access into word sized transfer sizes. This allows to inline the complete access and optimize it all into a single load. The main advantage is that this avoids the overhead of double page faults. When normal copy_from_user() fails it reexecutes the copy to compute an accurate number of non copied bytes. This leads to executing the expensive page fault twice. While walking stacks having a fault at some point is relatively common (typically when some part of the program isn't compiled with frame pointers), so this is a large overhead. With the optimized copies we avoid this problem because they only do all accesses once. And of course they're much faster too when the access does not fault because they're just single instructions instead of complex function calls. While profiling a kernel build with -g, the patch brings down the average time of the PMI handler from 966ns to 552ns (-43%). Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1445551641-13379-2-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-22 22:07:21 +00:00
pagefault_disable();
while (entry->nr < entry->max_stack) {
perf/x86: Restore TASK_SIZE check on frame pointer The following commit: 75925e1ad7f5 ("perf/x86: Optimize stack walk user accesses") ... switched from copy_from_user_nmi() to __copy_from_user_nmi() with a manual access_ok() check. Unfortunately, copy_from_user_nmi() does an explicit check against TASK_SIZE, whereas the access_ok() uses whatever the current address limit of the task is. We are getting NMIs when __probe_kernel_read() has switched to KERNEL_DS, and then see vmalloc faults when we access what looks like pointers into vmalloc space: [] WARNING: CPU: 3 PID: 3685731 at arch/x86/mm/fault.c:435 vmalloc_fault+0x289/0x290 [] CPU: 3 PID: 3685731 Comm: sh Tainted: G W 4.6.0-5_fbk1_223_gdbf0f40 #1 [] Call Trace: [] <NMI> [<ffffffff814717d1>] dump_stack+0x4d/0x6c [] [<ffffffff81076e43>] __warn+0xd3/0xf0 [] [<ffffffff81076f2d>] warn_slowpath_null+0x1d/0x20 [] [<ffffffff8104a899>] vmalloc_fault+0x289/0x290 [] [<ffffffff8104b5a0>] __do_page_fault+0x330/0x490 [] [<ffffffff8104b70c>] do_page_fault+0xc/0x10 [] [<ffffffff81794e82>] page_fault+0x22/0x30 [] [<ffffffff81006280>] ? perf_callchain_user+0x100/0x2a0 [] [<ffffffff8115124f>] get_perf_callchain+0x17f/0x190 [] [<ffffffff811512c7>] perf_callchain+0x67/0x80 [] [<ffffffff8114e750>] perf_prepare_sample+0x2a0/0x370 [] [<ffffffff8114e840>] perf_event_output+0x20/0x60 [] [<ffffffff8114aee7>] ? perf_event_update_userpage+0xc7/0x130 [] [<ffffffff8114ea01>] __perf_event_overflow+0x181/0x1d0 [] [<ffffffff8114f484>] perf_event_overflow+0x14/0x20 [] [<ffffffff8100a6e3>] intel_pmu_handle_irq+0x1d3/0x490 [] [<ffffffff8147daf7>] ? copy_user_enhanced_fast_string+0x7/0x10 [] [<ffffffff81197191>] ? vunmap_page_range+0x1a1/0x2f0 [] [<ffffffff811972f1>] ? unmap_kernel_range_noflush+0x11/0x20 [] [<ffffffff814f2056>] ? ghes_copy_tofrom_phys+0x116/0x1f0 [] [<ffffffff81040d1d>] ? x2apic_send_IPI_self+0x1d/0x20 [] [<ffffffff8100411d>] perf_event_nmi_handler+0x2d/0x50 [] [<ffffffff8101ea31>] nmi_handle+0x61/0x110 [] [<ffffffff8101ef94>] default_do_nmi+0x44/0x110 [] [<ffffffff8101f13b>] do_nmi+0xdb/0x150 [] [<ffffffff81795187>] end_repeat_nmi+0x1a/0x1e [] [<ffffffff8147daf7>] ? copy_user_enhanced_fast_string+0x7/0x10 [] [<ffffffff8147daf7>] ? copy_user_enhanced_fast_string+0x7/0x10 [] [<ffffffff8147daf7>] ? copy_user_enhanced_fast_string+0x7/0x10 [] <<EOE>> <IRQ> [<ffffffff8115d05e>] ? __probe_kernel_read+0x3e/0xa0 Fix this by moving the valid_user_frame() check to before the uaccess that loads the return address and the pointer to the next frame. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: linux-kernel@vger.kernel.org Fixes: 75925e1ad7f5 ("perf/x86: Optimize stack walk user accesses") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-22 09:57:42 +00:00
if (!valid_user_frame(fp, sizeof(frame)))
perf/x86: Optimize stack walk user accesses Change the perf user stack walking to use the new __copy_from_user_nmi(), and split each access into word sized transfer sizes. This allows to inline the complete access and optimize it all into a single load. The main advantage is that this avoids the overhead of double page faults. When normal copy_from_user() fails it reexecutes the copy to compute an accurate number of non copied bytes. This leads to executing the expensive page fault twice. While walking stacks having a fault at some point is relatively common (typically when some part of the program isn't compiled with frame pointers), so this is a large overhead. With the optimized copies we avoid this problem because they only do all accesses once. And of course they're much faster too when the access does not fault because they're just single instructions instead of complex function calls. While profiling a kernel build with -g, the patch brings down the average time of the PMI handler from 966ns to 552ns (-43%). Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1445551641-13379-2-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-22 22:07:21 +00:00
break;
if (__get_user(frame.next_frame, &fp->next_frame))
perf/x86: Optimize stack walk user accesses Change the perf user stack walking to use the new __copy_from_user_nmi(), and split each access into word sized transfer sizes. This allows to inline the complete access and optimize it all into a single load. The main advantage is that this avoids the overhead of double page faults. When normal copy_from_user() fails it reexecutes the copy to compute an accurate number of non copied bytes. This leads to executing the expensive page fault twice. While walking stacks having a fault at some point is relatively common (typically when some part of the program isn't compiled with frame pointers), so this is a large overhead. With the optimized copies we avoid this problem because they only do all accesses once. And of course they're much faster too when the access does not fault because they're just single instructions instead of complex function calls. While profiling a kernel build with -g, the patch brings down the average time of the PMI handler from 966ns to 552ns (-43%). Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1445551641-13379-2-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-22 22:07:21 +00:00
break;
if (__get_user(frame.return_address, &fp->return_address))
break;
perf_counter: x86: Fix call-chain support to use NMI-safe methods __copy_from_user_inatomic() isn't NMI safe in that it can trigger the page fault handler which is another trap and its return path invokes IRET which will also close the NMI context. Therefore use a GUP based approach to copy the stack frames over. We tried an alternative solution as well: we used a forward ported version of Mathieu Desnoyers's "NMI safe INT3 and Page Fault" patch that modifies the exception return path to use an open-coded IRET with explicit stack unrolling and TF checking. This didnt work as it interacted with faulting user-space instructions, causing them not to restart properly, which corrupts user-space registers. Solving that would probably involve disassembling those instructions and backtracing the RIP. But even without that, the code was deemed rather complex to the already non-trivial x86 entry assembly code, so instead we went for this GUP based method that does a software-walk of the pagetables. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Nick Piggin <npiggin@suse.de> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-15 11:07:24 +00:00
perf_callchain_store(entry, cs_base + frame.return_address);
fp = compat_ptr(ss_base + frame.next_frame);
}
perf/x86: Optimize stack walk user accesses Change the perf user stack walking to use the new __copy_from_user_nmi(), and split each access into word sized transfer sizes. This allows to inline the complete access and optimize it all into a single load. The main advantage is that this avoids the overhead of double page faults. When normal copy_from_user() fails it reexecutes the copy to compute an accurate number of non copied bytes. This leads to executing the expensive page fault twice. While walking stacks having a fault at some point is relatively common (typically when some part of the program isn't compiled with frame pointers), so this is a large overhead. With the optimized copies we avoid this problem because they only do all accesses once. And of course they're much faster too when the access does not fault because they're just single instructions instead of complex function calls. While profiling a kernel build with -g, the patch brings down the average time of the PMI handler from 966ns to 552ns (-43%). Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1445551641-13379-2-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-22 22:07:21 +00:00
pagefault_enable();
return 1;
}
#else
static inline int
perf_callchain_user32(struct pt_regs *regs, struct perf_callchain_entry_ctx *entry)
{
return 0;
}
#endif
void
perf_callchain_user(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs)
{
struct stack_frame frame;
const struct stack_frame __user *fp;
if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) {
/* TODO: We don't support guest os callchain now */
return;
}
/*
* We don't know what to do with VM86 stacks.. ignore them for now.
*/
if (regs->flags & (X86_VM_MASK | PERF_EFLAGS_VM))
return;
fp = (void __user *)regs->bp;
perf_callchain_store(entry, regs->ip);
if (!nmi_uaccess_okay())
x86, perf: Check that current->mm is alive before getting user callchain An event may occur when an mm is already released. I added an event in dequeue_entity() and caught a panic with the following backtrace: [ 434.421110] BUG: unable to handle kernel NULL pointer dereference at 0000000000000050 [ 434.421258] IP: [<ffffffff810464ac>] __get_user_pages_fast+0x9c/0x120 ... [ 434.421258] Call Trace: [ 434.421258] [<ffffffff8101ae81>] copy_from_user_nmi+0x51/0xf0 [ 434.421258] [<ffffffff8109a0d5>] ? sched_clock_local+0x25/0x90 [ 434.421258] [<ffffffff8101b048>] perf_callchain_user+0x128/0x170 [ 434.421258] [<ffffffff811154cd>] ? __perf_event_header__init_id+0xed/0x100 [ 434.421258] [<ffffffff81116690>] perf_prepare_sample+0x200/0x280 [ 434.421258] [<ffffffff81118da8>] __perf_event_overflow+0x1b8/0x290 [ 434.421258] [<ffffffff81065240>] ? tg_shares_up+0x0/0x670 [ 434.421258] [<ffffffff8104fe1a>] ? walk_tg_tree+0x6a/0xb0 [ 434.421258] [<ffffffff81118f44>] perf_swevent_overflow+0xc4/0xf0 [ 434.421258] [<ffffffff81119150>] do_perf_sw_event+0x1e0/0x250 [ 434.421258] [<ffffffff81119204>] perf_tp_event+0x44/0x70 [ 434.421258] [<ffffffff8105701f>] ftrace_profile_sched_block+0xdf/0x110 [ 434.421258] [<ffffffff8106121d>] dequeue_entity+0x2ad/0x2d0 [ 434.421258] [<ffffffff810614ec>] dequeue_task_fair+0x1c/0x60 [ 434.421258] [<ffffffff8105818a>] dequeue_task+0x9a/0xb0 [ 434.421258] [<ffffffff810581e2>] deactivate_task+0x42/0xe0 [ 434.421258] [<ffffffff814bc019>] thread_return+0x191/0x808 [ 434.421258] [<ffffffff81098a44>] ? switch_task_namespaces+0x24/0x60 [ 434.421258] [<ffffffff8106f4c4>] do_exit+0x464/0x910 [ 434.421258] [<ffffffff8106f9c8>] do_group_exit+0x58/0xd0 [ 434.421258] [<ffffffff8106fa57>] sys_exit_group+0x17/0x20 [ 434.421258] [<ffffffff8100b202>] system_call_fastpath+0x16/0x1b Signed-off-by: Andrey Vagin <avagin@openvz.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: stable@kernel.org Link: http://lkml.kernel.org/r/1314693156-24131-1-git-send-email-avagin@openvz.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-08-30 08:32:36 +00:00
return;
if (perf_callchain_user32(regs, entry))
return;
perf/x86: Optimize stack walk user accesses Change the perf user stack walking to use the new __copy_from_user_nmi(), and split each access into word sized transfer sizes. This allows to inline the complete access and optimize it all into a single load. The main advantage is that this avoids the overhead of double page faults. When normal copy_from_user() fails it reexecutes the copy to compute an accurate number of non copied bytes. This leads to executing the expensive page fault twice. While walking stacks having a fault at some point is relatively common (typically when some part of the program isn't compiled with frame pointers), so this is a large overhead. With the optimized copies we avoid this problem because they only do all accesses once. And of course they're much faster too when the access does not fault because they're just single instructions instead of complex function calls. While profiling a kernel build with -g, the patch brings down the average time of the PMI handler from 966ns to 552ns (-43%). Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1445551641-13379-2-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-22 22:07:21 +00:00
pagefault_disable();
while (entry->nr < entry->max_stack) {
perf/x86: Restore TASK_SIZE check on frame pointer The following commit: 75925e1ad7f5 ("perf/x86: Optimize stack walk user accesses") ... switched from copy_from_user_nmi() to __copy_from_user_nmi() with a manual access_ok() check. Unfortunately, copy_from_user_nmi() does an explicit check against TASK_SIZE, whereas the access_ok() uses whatever the current address limit of the task is. We are getting NMIs when __probe_kernel_read() has switched to KERNEL_DS, and then see vmalloc faults when we access what looks like pointers into vmalloc space: [] WARNING: CPU: 3 PID: 3685731 at arch/x86/mm/fault.c:435 vmalloc_fault+0x289/0x290 [] CPU: 3 PID: 3685731 Comm: sh Tainted: G W 4.6.0-5_fbk1_223_gdbf0f40 #1 [] Call Trace: [] <NMI> [<ffffffff814717d1>] dump_stack+0x4d/0x6c [] [<ffffffff81076e43>] __warn+0xd3/0xf0 [] [<ffffffff81076f2d>] warn_slowpath_null+0x1d/0x20 [] [<ffffffff8104a899>] vmalloc_fault+0x289/0x290 [] [<ffffffff8104b5a0>] __do_page_fault+0x330/0x490 [] [<ffffffff8104b70c>] do_page_fault+0xc/0x10 [] [<ffffffff81794e82>] page_fault+0x22/0x30 [] [<ffffffff81006280>] ? perf_callchain_user+0x100/0x2a0 [] [<ffffffff8115124f>] get_perf_callchain+0x17f/0x190 [] [<ffffffff811512c7>] perf_callchain+0x67/0x80 [] [<ffffffff8114e750>] perf_prepare_sample+0x2a0/0x370 [] [<ffffffff8114e840>] perf_event_output+0x20/0x60 [] [<ffffffff8114aee7>] ? perf_event_update_userpage+0xc7/0x130 [] [<ffffffff8114ea01>] __perf_event_overflow+0x181/0x1d0 [] [<ffffffff8114f484>] perf_event_overflow+0x14/0x20 [] [<ffffffff8100a6e3>] intel_pmu_handle_irq+0x1d3/0x490 [] [<ffffffff8147daf7>] ? copy_user_enhanced_fast_string+0x7/0x10 [] [<ffffffff81197191>] ? vunmap_page_range+0x1a1/0x2f0 [] [<ffffffff811972f1>] ? unmap_kernel_range_noflush+0x11/0x20 [] [<ffffffff814f2056>] ? ghes_copy_tofrom_phys+0x116/0x1f0 [] [<ffffffff81040d1d>] ? x2apic_send_IPI_self+0x1d/0x20 [] [<ffffffff8100411d>] perf_event_nmi_handler+0x2d/0x50 [] [<ffffffff8101ea31>] nmi_handle+0x61/0x110 [] [<ffffffff8101ef94>] default_do_nmi+0x44/0x110 [] [<ffffffff8101f13b>] do_nmi+0xdb/0x150 [] [<ffffffff81795187>] end_repeat_nmi+0x1a/0x1e [] [<ffffffff8147daf7>] ? copy_user_enhanced_fast_string+0x7/0x10 [] [<ffffffff8147daf7>] ? copy_user_enhanced_fast_string+0x7/0x10 [] [<ffffffff8147daf7>] ? copy_user_enhanced_fast_string+0x7/0x10 [] <<EOE>> <IRQ> [<ffffffff8115d05e>] ? __probe_kernel_read+0x3e/0xa0 Fix this by moving the valid_user_frame() check to before the uaccess that loads the return address and the pointer to the next frame. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: linux-kernel@vger.kernel.org Fixes: 75925e1ad7f5 ("perf/x86: Optimize stack walk user accesses") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-22 09:57:42 +00:00
if (!valid_user_frame(fp, sizeof(frame)))
perf/x86: Optimize stack walk user accesses Change the perf user stack walking to use the new __copy_from_user_nmi(), and split each access into word sized transfer sizes. This allows to inline the complete access and optimize it all into a single load. The main advantage is that this avoids the overhead of double page faults. When normal copy_from_user() fails it reexecutes the copy to compute an accurate number of non copied bytes. This leads to executing the expensive page fault twice. While walking stacks having a fault at some point is relatively common (typically when some part of the program isn't compiled with frame pointers), so this is a large overhead. With the optimized copies we avoid this problem because they only do all accesses once. And of course they're much faster too when the access does not fault because they're just single instructions instead of complex function calls. While profiling a kernel build with -g, the patch brings down the average time of the PMI handler from 966ns to 552ns (-43%). Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1445551641-13379-2-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-22 22:07:21 +00:00
break;
if (__get_user(frame.next_frame, &fp->next_frame))
perf/x86: Optimize stack walk user accesses Change the perf user stack walking to use the new __copy_from_user_nmi(), and split each access into word sized transfer sizes. This allows to inline the complete access and optimize it all into a single load. The main advantage is that this avoids the overhead of double page faults. When normal copy_from_user() fails it reexecutes the copy to compute an accurate number of non copied bytes. This leads to executing the expensive page fault twice. While walking stacks having a fault at some point is relatively common (typically when some part of the program isn't compiled with frame pointers), so this is a large overhead. With the optimized copies we avoid this problem because they only do all accesses once. And of course they're much faster too when the access does not fault because they're just single instructions instead of complex function calls. While profiling a kernel build with -g, the patch brings down the average time of the PMI handler from 966ns to 552ns (-43%). Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1445551641-13379-2-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-22 22:07:21 +00:00
break;
if (__get_user(frame.return_address, &fp->return_address))
break;
perf_callchain_store(entry, frame.return_address);
perf/x86: Optimize stack walk user accesses Change the perf user stack walking to use the new __copy_from_user_nmi(), and split each access into word sized transfer sizes. This allows to inline the complete access and optimize it all into a single load. The main advantage is that this avoids the overhead of double page faults. When normal copy_from_user() fails it reexecutes the copy to compute an accurate number of non copied bytes. This leads to executing the expensive page fault twice. While walking stacks having a fault at some point is relatively common (typically when some part of the program isn't compiled with frame pointers), so this is a large overhead. With the optimized copies we avoid this problem because they only do all accesses once. And of course they're much faster too when the access does not fault because they're just single instructions instead of complex function calls. While profiling a kernel build with -g, the patch brings down the average time of the PMI handler from 966ns to 552ns (-43%). Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1445551641-13379-2-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-22 22:07:21 +00:00
fp = (void __user *)frame.next_frame;
}
perf/x86: Optimize stack walk user accesses Change the perf user stack walking to use the new __copy_from_user_nmi(), and split each access into word sized transfer sizes. This allows to inline the complete access and optimize it all into a single load. The main advantage is that this avoids the overhead of double page faults. When normal copy_from_user() fails it reexecutes the copy to compute an accurate number of non copied bytes. This leads to executing the expensive page fault twice. While walking stacks having a fault at some point is relatively common (typically when some part of the program isn't compiled with frame pointers), so this is a large overhead. With the optimized copies we avoid this problem because they only do all accesses once. And of course they're much faster too when the access does not fault because they're just single instructions instead of complex function calls. While profiling a kernel build with -g, the patch brings down the average time of the PMI handler from 966ns to 552ns (-43%). Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1445551641-13379-2-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-22 22:07:21 +00:00
pagefault_enable();
}
/*
* Deal with code segment offsets for the various execution modes:
*
* VM86 - the good olde 16 bit days, where the linear address is
* 20 bits and we use regs->ip + 0x10 * regs->cs.
*
* IA32 - Where we need to look at GDT/LDT segment descriptor tables
* to figure out what the 32bit base address is.
*
* X32 - has TIF_X32 set, but is running in x86_64
*
* X86_64 - CS,DS,SS,ES are all zero based.
*/
static unsigned long code_segment_base(struct pt_regs *regs)
{
/*
* For IA32 we look at the GDT/LDT segment base to convert the
* effective IP to a linear address.
*/
#ifdef CONFIG_X86_32
/*
* If we are in VM86 mode, add the segment offset to convert to a
* linear address.
*/
if (regs->flags & X86_VM_MASK)
return 0x10 * regs->cs;
if (user_mode(regs) && regs->cs != __USER_CS)
return get_segment_base(regs->cs);
#else
if (user_mode(regs) && !user_64bit_mode(regs) &&
regs->cs != __USER32_CS)
return get_segment_base(regs->cs);
#endif
return 0;
}
unsigned long perf_instruction_pointer(struct pt_regs *regs)
{
if (perf_guest_cbs && perf_guest_cbs->is_in_guest())
return perf_guest_cbs->get_guest_ip();
return regs->ip + code_segment_base(regs);
}
unsigned long perf_misc_flags(struct pt_regs *regs)
{
int misc = 0;
if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) {
if (perf_guest_cbs->is_user_mode())
misc |= PERF_RECORD_MISC_GUEST_USER;
else
misc |= PERF_RECORD_MISC_GUEST_KERNEL;
} else {
if (user_mode(regs))
misc |= PERF_RECORD_MISC_USER;
else
misc |= PERF_RECORD_MISC_KERNEL;
}
if (regs->flags & PERF_EFLAGS_EXACT)
misc |= PERF_RECORD_MISC_EXACT_IP;
return misc;
}
void perf_get_x86_pmu_capability(struct x86_pmu_capability *cap)
{
cap->version = x86_pmu.version;
cap->num_counters_gp = x86_pmu.num_counters;
cap->num_counters_fixed = x86_pmu.num_counters_fixed;
cap->bit_width_gp = x86_pmu.cntval_bits;
cap->bit_width_fixed = x86_pmu.cntval_bits;
cap->events_mask = (unsigned int)x86_pmu.events_maskl;
cap->events_mask_len = x86_pmu.events_mask_len;
}
EXPORT_SYMBOL_GPL(perf_get_x86_pmu_capability);