2013-03-12 03:38:24 +00:00
|
|
|
/*
|
|
|
|
* Driver for Broadcom BCM2835 SPI Controllers
|
|
|
|
*
|
|
|
|
* Copyright (C) 2012 Chris Boot
|
|
|
|
* Copyright (C) 2013 Stephen Warren
|
2015-03-26 10:08:36 +00:00
|
|
|
* Copyright (C) 2015 Martin Sperl
|
2013-03-12 03:38:24 +00:00
|
|
|
*
|
|
|
|
* This driver is inspired by:
|
|
|
|
* spi-ath79.c, Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
|
|
|
|
* spi-atmel.c, Copyright (C) 2006 Atmel Corporation
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
|
|
* (at your option) any later version.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/clk.h>
|
|
|
|
#include <linux/completion.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/err.h>
|
|
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <linux/io.h>
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/of.h>
|
|
|
|
#include <linux/of_irq.h>
|
2015-03-26 10:08:36 +00:00
|
|
|
#include <linux/of_gpio.h>
|
2013-03-12 03:38:24 +00:00
|
|
|
#include <linux/of_device.h>
|
|
|
|
#include <linux/spi/spi.h>
|
|
|
|
|
|
|
|
/* SPI register offsets */
|
|
|
|
#define BCM2835_SPI_CS 0x00
|
|
|
|
#define BCM2835_SPI_FIFO 0x04
|
|
|
|
#define BCM2835_SPI_CLK 0x08
|
|
|
|
#define BCM2835_SPI_DLEN 0x0c
|
|
|
|
#define BCM2835_SPI_LTOH 0x10
|
|
|
|
#define BCM2835_SPI_DC 0x14
|
|
|
|
|
|
|
|
/* Bitfields in CS */
|
|
|
|
#define BCM2835_SPI_CS_LEN_LONG 0x02000000
|
|
|
|
#define BCM2835_SPI_CS_DMA_LEN 0x01000000
|
|
|
|
#define BCM2835_SPI_CS_CSPOL2 0x00800000
|
|
|
|
#define BCM2835_SPI_CS_CSPOL1 0x00400000
|
|
|
|
#define BCM2835_SPI_CS_CSPOL0 0x00200000
|
|
|
|
#define BCM2835_SPI_CS_RXF 0x00100000
|
|
|
|
#define BCM2835_SPI_CS_RXR 0x00080000
|
|
|
|
#define BCM2835_SPI_CS_TXD 0x00040000
|
|
|
|
#define BCM2835_SPI_CS_RXD 0x00020000
|
|
|
|
#define BCM2835_SPI_CS_DONE 0x00010000
|
|
|
|
#define BCM2835_SPI_CS_LEN 0x00002000
|
|
|
|
#define BCM2835_SPI_CS_REN 0x00001000
|
|
|
|
#define BCM2835_SPI_CS_ADCS 0x00000800
|
|
|
|
#define BCM2835_SPI_CS_INTR 0x00000400
|
|
|
|
#define BCM2835_SPI_CS_INTD 0x00000200
|
|
|
|
#define BCM2835_SPI_CS_DMAEN 0x00000100
|
|
|
|
#define BCM2835_SPI_CS_TA 0x00000080
|
|
|
|
#define BCM2835_SPI_CS_CSPOL 0x00000040
|
|
|
|
#define BCM2835_SPI_CS_CLEAR_RX 0x00000020
|
|
|
|
#define BCM2835_SPI_CS_CLEAR_TX 0x00000010
|
|
|
|
#define BCM2835_SPI_CS_CPOL 0x00000008
|
|
|
|
#define BCM2835_SPI_CS_CPHA 0x00000004
|
|
|
|
#define BCM2835_SPI_CS_CS_10 0x00000002
|
|
|
|
#define BCM2835_SPI_CS_CS_01 0x00000001
|
|
|
|
|
|
|
|
#define BCM2835_SPI_TIMEOUT_MS 30000
|
2015-03-19 09:01:53 +00:00
|
|
|
#define BCM2835_SPI_MODE_BITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH \
|
|
|
|
| SPI_NO_CS | SPI_3WIRE)
|
2013-03-12 03:38:24 +00:00
|
|
|
|
|
|
|
#define DRV_NAME "spi-bcm2835"
|
|
|
|
|
|
|
|
struct bcm2835_spi {
|
|
|
|
void __iomem *regs;
|
|
|
|
struct clk *clk;
|
|
|
|
int irq;
|
|
|
|
const u8 *tx_buf;
|
|
|
|
u8 *rx_buf;
|
2015-03-26 10:08:36 +00:00
|
|
|
int tx_len;
|
|
|
|
int rx_len;
|
2013-03-12 03:38:24 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
static inline u32 bcm2835_rd(struct bcm2835_spi *bs, unsigned reg)
|
|
|
|
{
|
|
|
|
return readl(bs->regs + reg);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void bcm2835_wr(struct bcm2835_spi *bs, unsigned reg, u32 val)
|
|
|
|
{
|
|
|
|
writel(val, bs->regs + reg);
|
|
|
|
}
|
|
|
|
|
2015-03-23 14:11:53 +00:00
|
|
|
static inline void bcm2835_rd_fifo(struct bcm2835_spi *bs)
|
2013-03-12 03:38:24 +00:00
|
|
|
{
|
|
|
|
u8 byte;
|
|
|
|
|
2015-03-26 10:08:36 +00:00
|
|
|
while ((bs->rx_len) &&
|
|
|
|
(bcm2835_rd(bs, BCM2835_SPI_CS) & BCM2835_SPI_CS_RXD)) {
|
2013-03-12 03:38:24 +00:00
|
|
|
byte = bcm2835_rd(bs, BCM2835_SPI_FIFO);
|
|
|
|
if (bs->rx_buf)
|
|
|
|
*bs->rx_buf++ = byte;
|
2015-03-26 10:08:36 +00:00
|
|
|
bs->rx_len--;
|
2013-03-12 03:38:24 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2015-03-23 14:11:53 +00:00
|
|
|
static inline void bcm2835_wr_fifo(struct bcm2835_spi *bs)
|
2013-03-12 03:38:24 +00:00
|
|
|
{
|
|
|
|
u8 byte;
|
|
|
|
|
2015-03-26 10:08:36 +00:00
|
|
|
while ((bs->tx_len) &&
|
2015-03-23 14:11:53 +00:00
|
|
|
(bcm2835_rd(bs, BCM2835_SPI_CS) & BCM2835_SPI_CS_TXD)) {
|
2013-03-12 03:38:24 +00:00
|
|
|
byte = bs->tx_buf ? *bs->tx_buf++ : 0;
|
|
|
|
bcm2835_wr(bs, BCM2835_SPI_FIFO, byte);
|
2015-03-26 10:08:36 +00:00
|
|
|
bs->tx_len--;
|
2013-03-12 03:38:24 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2015-03-26 10:08:36 +00:00
|
|
|
static void bcm2835_spi_reset_hw(struct spi_master *master)
|
|
|
|
{
|
|
|
|
struct bcm2835_spi *bs = spi_master_get_devdata(master);
|
|
|
|
u32 cs = bcm2835_rd(bs, BCM2835_SPI_CS);
|
|
|
|
|
|
|
|
/* Disable SPI interrupts and transfer */
|
|
|
|
cs &= ~(BCM2835_SPI_CS_INTR |
|
|
|
|
BCM2835_SPI_CS_INTD |
|
|
|
|
BCM2835_SPI_CS_TA);
|
|
|
|
/* and reset RX/TX FIFOS */
|
|
|
|
cs |= BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX;
|
|
|
|
|
|
|
|
/* and reset the SPI_HW */
|
|
|
|
bcm2835_wr(bs, BCM2835_SPI_CS, cs);
|
|
|
|
}
|
|
|
|
|
2013-03-12 03:38:24 +00:00
|
|
|
static irqreturn_t bcm2835_spi_interrupt(int irq, void *dev_id)
|
|
|
|
{
|
|
|
|
struct spi_master *master = dev_id;
|
|
|
|
struct bcm2835_spi *bs = spi_master_get_devdata(master);
|
|
|
|
|
2015-03-23 14:11:53 +00:00
|
|
|
/* Read as many bytes as possible from FIFO */
|
|
|
|
bcm2835_rd_fifo(bs);
|
2015-03-26 10:08:36 +00:00
|
|
|
/* Write as many bytes as possible to FIFO */
|
|
|
|
bcm2835_wr_fifo(bs);
|
|
|
|
|
|
|
|
/* based on flags decide if we can finish the transfer */
|
|
|
|
if (bcm2835_rd(bs, BCM2835_SPI_CS) & BCM2835_SPI_CS_DONE) {
|
|
|
|
/* Transfer complete - reset SPI HW */
|
|
|
|
bcm2835_spi_reset_hw(master);
|
|
|
|
/* wake up the framework */
|
|
|
|
complete(&master->xfer_completion);
|
2013-03-12 03:38:24 +00:00
|
|
|
}
|
|
|
|
|
2015-03-23 14:11:53 +00:00
|
|
|
return IRQ_HANDLED;
|
2013-03-12 03:38:24 +00:00
|
|
|
}
|
|
|
|
|
2015-03-26 10:08:36 +00:00
|
|
|
static int bcm2835_spi_transfer_one(struct spi_master *master,
|
|
|
|
struct spi_device *spi,
|
|
|
|
struct spi_transfer *tfr)
|
2013-03-12 03:38:24 +00:00
|
|
|
{
|
2015-03-26 10:08:36 +00:00
|
|
|
struct bcm2835_spi *bs = spi_master_get_devdata(master);
|
2013-03-12 03:38:24 +00:00
|
|
|
unsigned long spi_hz, clk_hz, cdiv;
|
2015-03-26 10:08:36 +00:00
|
|
|
u32 cs = bcm2835_rd(bs, BCM2835_SPI_CS);
|
2013-03-12 03:38:24 +00:00
|
|
|
|
2015-03-26 10:08:36 +00:00
|
|
|
/* set clock */
|
2013-03-12 03:38:24 +00:00
|
|
|
spi_hz = tfr->speed_hz;
|
|
|
|
clk_hz = clk_get_rate(bs->clk);
|
|
|
|
|
|
|
|
if (spi_hz >= clk_hz / 2) {
|
|
|
|
cdiv = 2; /* clk_hz/2 is the fastest we can go */
|
|
|
|
} else if (spi_hz) {
|
2015-03-19 09:01:52 +00:00
|
|
|
/* CDIV must be a multiple of two */
|
|
|
|
cdiv = DIV_ROUND_UP(clk_hz, spi_hz);
|
|
|
|
cdiv += (cdiv % 2);
|
2013-03-12 03:38:24 +00:00
|
|
|
|
|
|
|
if (cdiv >= 65536)
|
|
|
|
cdiv = 0; /* 0 is the slowest we can go */
|
2015-03-20 14:26:11 +00:00
|
|
|
} else {
|
2013-03-12 03:38:24 +00:00
|
|
|
cdiv = 0; /* 0 is the slowest we can go */
|
2015-03-20 14:26:11 +00:00
|
|
|
}
|
2015-03-26 10:08:36 +00:00
|
|
|
bcm2835_wr(bs, BCM2835_SPI_CLK, cdiv);
|
2013-03-12 03:38:24 +00:00
|
|
|
|
2015-03-26 10:08:36 +00:00
|
|
|
/* handle all the modes */
|
2015-03-19 09:01:53 +00:00
|
|
|
if ((spi->mode & SPI_3WIRE) && (tfr->rx_buf))
|
|
|
|
cs |= BCM2835_SPI_CS_REN;
|
2013-03-12 03:38:24 +00:00
|
|
|
if (spi->mode & SPI_CPOL)
|
|
|
|
cs |= BCM2835_SPI_CS_CPOL;
|
|
|
|
if (spi->mode & SPI_CPHA)
|
|
|
|
cs |= BCM2835_SPI_CS_CPHA;
|
|
|
|
|
2015-03-26 10:08:36 +00:00
|
|
|
/* for gpio_cs set dummy CS so that no HW-CS get changed
|
|
|
|
* we can not run this in bcm2835_spi_set_cs, as it does
|
|
|
|
* not get called for cs_gpio cases, so we need to do it here
|
|
|
|
*/
|
|
|
|
if (gpio_is_valid(spi->cs_gpio) || (spi->mode & SPI_NO_CS))
|
|
|
|
cs |= BCM2835_SPI_CS_CS_10 | BCM2835_SPI_CS_CS_01;
|
2013-03-12 03:38:24 +00:00
|
|
|
|
2015-03-26 10:08:36 +00:00
|
|
|
/* set transmit buffers and length */
|
2013-03-12 03:38:24 +00:00
|
|
|
bs->tx_buf = tfr->tx_buf;
|
|
|
|
bs->rx_buf = tfr->rx_buf;
|
2015-03-26 10:08:36 +00:00
|
|
|
bs->tx_len = tfr->len;
|
|
|
|
bs->rx_len = tfr->len;
|
2013-03-12 03:38:24 +00:00
|
|
|
|
2015-03-29 14:03:25 +00:00
|
|
|
/* fill in fifo if we have gpio-cs
|
|
|
|
* note that there have been rare events where the native-CS
|
|
|
|
* flapped for <1us which may change the behaviour
|
|
|
|
* with gpio-cs this does not happen, so it is implemented
|
|
|
|
* only for this case
|
|
|
|
*/
|
|
|
|
if (gpio_is_valid(spi->cs_gpio)) {
|
|
|
|
/* enable HW block, but without interrupts enabled
|
|
|
|
* this would triggern an immediate interrupt
|
|
|
|
*/
|
|
|
|
bcm2835_wr(bs, BCM2835_SPI_CS,
|
|
|
|
cs | BCM2835_SPI_CS_TA);
|
|
|
|
/* fill in tx fifo as much as possible */
|
|
|
|
bcm2835_wr_fifo(bs);
|
|
|
|
}
|
|
|
|
|
2013-03-12 03:38:24 +00:00
|
|
|
/*
|
|
|
|
* Enable the HW block. This will immediately trigger a DONE (TX
|
|
|
|
* empty) interrupt, upon which we will fill the TX FIFO with the
|
|
|
|
* first TX bytes. Pre-filling the TX FIFO here to avoid the
|
|
|
|
* interrupt doesn't work:-(
|
|
|
|
*/
|
2015-03-26 10:08:36 +00:00
|
|
|
cs |= BCM2835_SPI_CS_INTR | BCM2835_SPI_CS_INTD | BCM2835_SPI_CS_TA;
|
2013-03-12 03:38:24 +00:00
|
|
|
bcm2835_wr(bs, BCM2835_SPI_CS, cs);
|
|
|
|
|
2015-03-26 10:08:36 +00:00
|
|
|
/* signal that we need to wait for completion */
|
|
|
|
return 1;
|
2013-03-12 03:38:24 +00:00
|
|
|
}
|
|
|
|
|
2015-03-26 10:08:36 +00:00
|
|
|
static void bcm2835_spi_handle_err(struct spi_master *master,
|
|
|
|
struct spi_message *msg)
|
2013-03-12 03:38:24 +00:00
|
|
|
{
|
2015-03-26 10:08:36 +00:00
|
|
|
bcm2835_spi_reset_hw(master);
|
2013-03-12 03:38:24 +00:00
|
|
|
}
|
|
|
|
|
2015-03-26 10:08:36 +00:00
|
|
|
static void bcm2835_spi_set_cs(struct spi_device *spi, bool gpio_level)
|
2013-03-12 03:38:24 +00:00
|
|
|
{
|
2015-03-26 10:08:36 +00:00
|
|
|
/*
|
|
|
|
* we can assume that we are "native" as per spi_set_cs
|
|
|
|
* calling us ONLY when cs_gpio is not set
|
|
|
|
* we can also assume that we are CS < 3 as per bcm2835_spi_setup
|
|
|
|
* we would not get called because of error handling there.
|
|
|
|
* the level passed is the electrical level not enabled/disabled
|
|
|
|
* so it has to get translated back to enable/disable
|
|
|
|
* see spi_set_cs in spi.c for the implementation
|
|
|
|
*/
|
|
|
|
|
|
|
|
struct spi_master *master = spi->master;
|
2013-03-12 03:38:24 +00:00
|
|
|
struct bcm2835_spi *bs = spi_master_get_devdata(master);
|
2015-03-26 10:08:36 +00:00
|
|
|
u32 cs = bcm2835_rd(bs, BCM2835_SPI_CS);
|
|
|
|
bool enable;
|
2013-03-12 03:38:24 +00:00
|
|
|
|
2015-03-26 10:08:36 +00:00
|
|
|
/* calculate the enable flag from the passed gpio_level */
|
|
|
|
enable = (spi->mode & SPI_CS_HIGH) ? gpio_level : !gpio_level;
|
2013-03-12 03:38:24 +00:00
|
|
|
|
2015-03-26 10:08:36 +00:00
|
|
|
/* set flags for "reverse" polarity in the registers */
|
|
|
|
if (spi->mode & SPI_CS_HIGH) {
|
|
|
|
/* set the correct CS-bits */
|
|
|
|
cs |= BCM2835_SPI_CS_CSPOL;
|
|
|
|
cs |= BCM2835_SPI_CS_CSPOL0 << spi->chip_select;
|
|
|
|
} else {
|
|
|
|
/* clean the CS-bits */
|
|
|
|
cs &= ~BCM2835_SPI_CS_CSPOL;
|
|
|
|
cs &= ~(BCM2835_SPI_CS_CSPOL0 << spi->chip_select);
|
|
|
|
}
|
2013-03-12 03:38:24 +00:00
|
|
|
|
2015-03-26 10:08:36 +00:00
|
|
|
/* select the correct chip_select depending on disabled/enabled */
|
|
|
|
if (enable) {
|
|
|
|
/* set cs correctly */
|
|
|
|
if (spi->mode & SPI_NO_CS) {
|
|
|
|
/* use the "undefined" chip-select */
|
|
|
|
cs |= BCM2835_SPI_CS_CS_10 | BCM2835_SPI_CS_CS_01;
|
|
|
|
} else {
|
|
|
|
/* set the chip select */
|
|
|
|
cs &= ~(BCM2835_SPI_CS_CS_10 | BCM2835_SPI_CS_CS_01);
|
|
|
|
cs |= spi->chip_select;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
/* disable CSPOL which puts HW-CS into deselected state */
|
|
|
|
cs &= ~BCM2835_SPI_CS_CSPOL;
|
|
|
|
/* use the "undefined" chip-select as precaution */
|
|
|
|
cs |= BCM2835_SPI_CS_CS_10 | BCM2835_SPI_CS_CS_01;
|
2013-03-12 03:38:24 +00:00
|
|
|
}
|
|
|
|
|
2015-03-26 10:08:36 +00:00
|
|
|
/* finally set the calculated flags in SPI_CS */
|
|
|
|
bcm2835_wr(bs, BCM2835_SPI_CS, cs);
|
|
|
|
}
|
2013-03-12 03:38:24 +00:00
|
|
|
|
2015-04-06 17:16:31 +00:00
|
|
|
static int chip_match_name(struct gpio_chip *chip, void *data)
|
|
|
|
{
|
|
|
|
return !strcmp(chip->label, data);
|
|
|
|
}
|
|
|
|
|
2015-03-26 10:08:36 +00:00
|
|
|
static int bcm2835_spi_setup(struct spi_device *spi)
|
|
|
|
{
|
2015-04-06 17:16:31 +00:00
|
|
|
int err;
|
|
|
|
struct gpio_chip *chip;
|
2015-03-26 10:08:36 +00:00
|
|
|
/*
|
|
|
|
* sanity checking the native-chipselects
|
|
|
|
*/
|
|
|
|
if (spi->mode & SPI_NO_CS)
|
|
|
|
return 0;
|
|
|
|
if (gpio_is_valid(spi->cs_gpio))
|
|
|
|
return 0;
|
2015-04-06 17:16:31 +00:00
|
|
|
if (spi->chip_select > 1) {
|
|
|
|
/* error in the case of native CS requested with CS > 1
|
|
|
|
* officially there is a CS2, but it is not documented
|
|
|
|
* which GPIO is connected with that...
|
|
|
|
*/
|
|
|
|
dev_err(&spi->dev,
|
|
|
|
"setup: only two native chip-selects are supported\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
/* now translate native cs to GPIO */
|
|
|
|
|
|
|
|
/* get the gpio chip for the base */
|
|
|
|
chip = gpiochip_find("pinctrl-bcm2835", chip_match_name);
|
|
|
|
if (!chip)
|
2015-03-26 10:08:36 +00:00
|
|
|
return 0;
|
|
|
|
|
2015-04-06 17:16:31 +00:00
|
|
|
/* and calculate the real CS */
|
|
|
|
spi->cs_gpio = chip->base + 8 - spi->chip_select;
|
|
|
|
|
|
|
|
/* and set up the "mode" and level */
|
|
|
|
dev_info(&spi->dev, "setting up native-CS%i as GPIO %i\n",
|
|
|
|
spi->chip_select, spi->cs_gpio);
|
|
|
|
|
|
|
|
/* set up GPIO as output and pull to the correct level */
|
|
|
|
err = gpio_direction_output(spi->cs_gpio,
|
|
|
|
(spi->mode & SPI_CS_HIGH) ? 0 : 1);
|
|
|
|
if (err) {
|
|
|
|
dev_err(&spi->dev,
|
|
|
|
"could not set CS%i gpio %i as output: %i",
|
|
|
|
spi->chip_select, spi->cs_gpio, err);
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
/* the implementation of pinctrl-bcm2835 currently does not
|
|
|
|
* set the GPIO value when using gpio_direction_output
|
|
|
|
* so we are setting it here explicitly
|
|
|
|
*/
|
|
|
|
gpio_set_value(spi->cs_gpio, (spi->mode & SPI_CS_HIGH) ? 0 : 1);
|
|
|
|
|
|
|
|
return 0;
|
2013-03-12 03:38:24 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static int bcm2835_spi_probe(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct spi_master *master;
|
|
|
|
struct bcm2835_spi *bs;
|
|
|
|
struct resource *res;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
master = spi_alloc_master(&pdev->dev, sizeof(*bs));
|
|
|
|
if (!master) {
|
|
|
|
dev_err(&pdev->dev, "spi_alloc_master() failed\n");
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
platform_set_drvdata(pdev, master);
|
|
|
|
|
|
|
|
master->mode_bits = BCM2835_SPI_MODE_BITS;
|
2013-08-05 00:43:02 +00:00
|
|
|
master->bits_per_word_mask = SPI_BPW_MASK(8);
|
2013-03-12 03:38:24 +00:00
|
|
|
master->num_chipselect = 3;
|
2015-03-26 10:08:36 +00:00
|
|
|
master->setup = bcm2835_spi_setup;
|
|
|
|
master->set_cs = bcm2835_spi_set_cs;
|
|
|
|
master->transfer_one = bcm2835_spi_transfer_one;
|
|
|
|
master->handle_err = bcm2835_spi_handle_err;
|
2013-03-12 03:38:24 +00:00
|
|
|
master->dev.of_node = pdev->dev.of_node;
|
|
|
|
|
|
|
|
bs = spi_master_get_devdata(master);
|
|
|
|
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
2013-05-02 12:13:30 +00:00
|
|
|
bs->regs = devm_ioremap_resource(&pdev->dev, res);
|
|
|
|
if (IS_ERR(bs->regs)) {
|
|
|
|
err = PTR_ERR(bs->regs);
|
2013-03-12 03:38:24 +00:00
|
|
|
goto out_master_put;
|
|
|
|
}
|
|
|
|
|
|
|
|
bs->clk = devm_clk_get(&pdev->dev, NULL);
|
|
|
|
if (IS_ERR(bs->clk)) {
|
|
|
|
err = PTR_ERR(bs->clk);
|
|
|
|
dev_err(&pdev->dev, "could not get clk: %d\n", err);
|
|
|
|
goto out_master_put;
|
|
|
|
}
|
|
|
|
|
|
|
|
bs->irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
|
|
|
|
if (bs->irq <= 0) {
|
|
|
|
dev_err(&pdev->dev, "could not get IRQ: %d\n", bs->irq);
|
|
|
|
err = bs->irq ? bs->irq : -ENODEV;
|
|
|
|
goto out_master_put;
|
|
|
|
}
|
|
|
|
|
|
|
|
clk_prepare_enable(bs->clk);
|
|
|
|
|
2013-12-09 10:25:00 +00:00
|
|
|
err = devm_request_irq(&pdev->dev, bs->irq, bcm2835_spi_interrupt, 0,
|
2015-03-20 14:26:11 +00:00
|
|
|
dev_name(&pdev->dev), master);
|
2013-03-12 03:38:24 +00:00
|
|
|
if (err) {
|
|
|
|
dev_err(&pdev->dev, "could not request IRQ: %d\n", err);
|
|
|
|
goto out_clk_disable;
|
|
|
|
}
|
|
|
|
|
2015-03-26 10:08:36 +00:00
|
|
|
/* initialise the hardware with the default polarities */
|
2013-03-12 03:38:24 +00:00
|
|
|
bcm2835_wr(bs, BCM2835_SPI_CS,
|
|
|
|
BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX);
|
|
|
|
|
2013-09-24 04:23:00 +00:00
|
|
|
err = devm_spi_register_master(&pdev->dev, master);
|
2013-03-12 03:38:24 +00:00
|
|
|
if (err) {
|
|
|
|
dev_err(&pdev->dev, "could not register SPI master: %d\n", err);
|
2013-12-09 10:25:00 +00:00
|
|
|
goto out_clk_disable;
|
2013-03-12 03:38:24 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
out_clk_disable:
|
|
|
|
clk_disable_unprepare(bs->clk);
|
|
|
|
out_master_put:
|
|
|
|
spi_master_put(master);
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int bcm2835_spi_remove(struct platform_device *pdev)
|
|
|
|
{
|
2013-11-15 07:43:27 +00:00
|
|
|
struct spi_master *master = platform_get_drvdata(pdev);
|
2013-03-12 03:38:24 +00:00
|
|
|
struct bcm2835_spi *bs = spi_master_get_devdata(master);
|
|
|
|
|
|
|
|
/* Clear FIFOs, and disable the HW block */
|
|
|
|
bcm2835_wr(bs, BCM2835_SPI_CS,
|
|
|
|
BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX);
|
|
|
|
|
|
|
|
clk_disable_unprepare(bs->clk);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct of_device_id bcm2835_spi_match[] = {
|
|
|
|
{ .compatible = "brcm,bcm2835-spi", },
|
|
|
|
{}
|
|
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, bcm2835_spi_match);
|
|
|
|
|
|
|
|
static struct platform_driver bcm2835_spi_driver = {
|
|
|
|
.driver = {
|
|
|
|
.name = DRV_NAME,
|
|
|
|
.of_match_table = bcm2835_spi_match,
|
|
|
|
},
|
|
|
|
.probe = bcm2835_spi_probe,
|
|
|
|
.remove = bcm2835_spi_remove,
|
|
|
|
};
|
|
|
|
module_platform_driver(bcm2835_spi_driver);
|
|
|
|
|
|
|
|
MODULE_DESCRIPTION("SPI controller driver for Broadcom BCM2835");
|
|
|
|
MODULE_AUTHOR("Chris Boot <bootc@bootc.net>");
|
|
|
|
MODULE_LICENSE("GPL v2");
|