linux-stable/kernel/sched/stop_task.c

131 lines
2.8 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
// SPDX-License-Identifier: GPL-2.0
/*
* stop-task scheduling class.
*
* The stop task is the highest priority task in the system, it preempts
* everything and will be preempted by nothing.
*
* See kernel/stop_machine.c
*/
#ifdef CONFIG_SMP
static int
select_task_rq_stop(struct task_struct *p, int cpu, int flags)
{
return task_cpu(p); /* stop tasks as never migrate */
}
sched: Fix pick_next_task() vs 'change' pattern race Commit 67692435c411 ("sched: Rework pick_next_task() slow-path") inadvertly introduced a race because it changed a previously unexplored dependency between dropping the rq->lock and sched_class::put_prev_task(). The comments about dropping rq->lock, in for example newidle_balance(), only mentions the task being current and ->on_cpu being set. But when we look at the 'change' pattern (in for example sched_setnuma()): queued = task_on_rq_queued(p); /* p->on_rq == TASK_ON_RQ_QUEUED */ running = task_current(rq, p); /* rq->curr == p */ if (queued) dequeue_task(...); if (running) put_prev_task(...); /* change task properties */ if (queued) enqueue_task(...); if (running) set_next_task(...); It becomes obvious that if we do this after put_prev_task() has already been called on @p, things go sideways. This is exactly what the commit in question allows to happen when it does: prev->sched_class->put_prev_task(rq, prev, rf); if (!rq->nr_running) newidle_balance(rq, rf); The newidle_balance() call will drop rq->lock after we've called put_prev_task() and that allows the above 'change' pattern to interleave and mess up the state. Furthermore, it turns out we lost the RT-pull when we put the last DL task. Fix both problems by extracting the balancing from put_prev_task() and doing a multi-class balance() pass before put_prev_task(). Fixes: 67692435c411 ("sched: Rework pick_next_task() slow-path") Reported-by: Quentin Perret <qperret@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Quentin Perret <qperret@google.com> Tested-by: Valentin Schneider <valentin.schneider@arm.com>
2019-11-08 10:11:52 +00:00
static int
balance_stop(struct rq *rq, struct task_struct *prev, struct rq_flags *rf)
{
return sched_stop_runnable(rq);
}
#endif /* CONFIG_SMP */
static void
wakeup_preempt_stop(struct rq *rq, struct task_struct *p, int flags)
{
/* we're never preempted */
}
static void set_next_task_stop(struct rq *rq, struct task_struct *stop, bool first)
{
stop->se.exec_start = rq_clock_task(rq);
}
static struct task_struct *pick_task_stop(struct rq *rq)
{
sched: Fix pick_next_task() vs 'change' pattern race Commit 67692435c411 ("sched: Rework pick_next_task() slow-path") inadvertly introduced a race because it changed a previously unexplored dependency between dropping the rq->lock and sched_class::put_prev_task(). The comments about dropping rq->lock, in for example newidle_balance(), only mentions the task being current and ->on_cpu being set. But when we look at the 'change' pattern (in for example sched_setnuma()): queued = task_on_rq_queued(p); /* p->on_rq == TASK_ON_RQ_QUEUED */ running = task_current(rq, p); /* rq->curr == p */ if (queued) dequeue_task(...); if (running) put_prev_task(...); /* change task properties */ if (queued) enqueue_task(...); if (running) set_next_task(...); It becomes obvious that if we do this after put_prev_task() has already been called on @p, things go sideways. This is exactly what the commit in question allows to happen when it does: prev->sched_class->put_prev_task(rq, prev, rf); if (!rq->nr_running) newidle_balance(rq, rf); The newidle_balance() call will drop rq->lock after we've called put_prev_task() and that allows the above 'change' pattern to interleave and mess up the state. Furthermore, it turns out we lost the RT-pull when we put the last DL task. Fix both problems by extracting the balancing from put_prev_task() and doing a multi-class balance() pass before put_prev_task(). Fixes: 67692435c411 ("sched: Rework pick_next_task() slow-path") Reported-by: Quentin Perret <qperret@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Quentin Perret <qperret@google.com> Tested-by: Valentin Schneider <valentin.schneider@arm.com>
2019-11-08 10:11:52 +00:00
if (!sched_stop_runnable(rq))
return NULL;
sched: Fix pick_next_task() vs 'change' pattern race Commit 67692435c411 ("sched: Rework pick_next_task() slow-path") inadvertly introduced a race because it changed a previously unexplored dependency between dropping the rq->lock and sched_class::put_prev_task(). The comments about dropping rq->lock, in for example newidle_balance(), only mentions the task being current and ->on_cpu being set. But when we look at the 'change' pattern (in for example sched_setnuma()): queued = task_on_rq_queued(p); /* p->on_rq == TASK_ON_RQ_QUEUED */ running = task_current(rq, p); /* rq->curr == p */ if (queued) dequeue_task(...); if (running) put_prev_task(...); /* change task properties */ if (queued) enqueue_task(...); if (running) set_next_task(...); It becomes obvious that if we do this after put_prev_task() has already been called on @p, things go sideways. This is exactly what the commit in question allows to happen when it does: prev->sched_class->put_prev_task(rq, prev, rf); if (!rq->nr_running) newidle_balance(rq, rf); The newidle_balance() call will drop rq->lock after we've called put_prev_task() and that allows the above 'change' pattern to interleave and mess up the state. Furthermore, it turns out we lost the RT-pull when we put the last DL task. Fix both problems by extracting the balancing from put_prev_task() and doing a multi-class balance() pass before put_prev_task(). Fixes: 67692435c411 ("sched: Rework pick_next_task() slow-path") Reported-by: Quentin Perret <qperret@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Quentin Perret <qperret@google.com> Tested-by: Valentin Schneider <valentin.schneider@arm.com>
2019-11-08 10:11:52 +00:00
return rq->stop;
}
static struct task_struct *pick_next_task_stop(struct rq *rq)
{
struct task_struct *p = pick_task_stop(rq);
if (p)
set_next_task_stop(rq, p, true);
return p;
}
static void
enqueue_task_stop(struct rq *rq, struct task_struct *p, int flags)
{
add_nr_running(rq, 1);
}
static void
dequeue_task_stop(struct rq *rq, struct task_struct *p, int flags)
{
sub_nr_running(rq, 1);
}
static void yield_task_stop(struct rq *rq)
{
BUG(); /* the stop task should never yield, its pointless. */
}
sched: Fix pick_next_task() vs 'change' pattern race Commit 67692435c411 ("sched: Rework pick_next_task() slow-path") inadvertly introduced a race because it changed a previously unexplored dependency between dropping the rq->lock and sched_class::put_prev_task(). The comments about dropping rq->lock, in for example newidle_balance(), only mentions the task being current and ->on_cpu being set. But when we look at the 'change' pattern (in for example sched_setnuma()): queued = task_on_rq_queued(p); /* p->on_rq == TASK_ON_RQ_QUEUED */ running = task_current(rq, p); /* rq->curr == p */ if (queued) dequeue_task(...); if (running) put_prev_task(...); /* change task properties */ if (queued) enqueue_task(...); if (running) set_next_task(...); It becomes obvious that if we do this after put_prev_task() has already been called on @p, things go sideways. This is exactly what the commit in question allows to happen when it does: prev->sched_class->put_prev_task(rq, prev, rf); if (!rq->nr_running) newidle_balance(rq, rf); The newidle_balance() call will drop rq->lock after we've called put_prev_task() and that allows the above 'change' pattern to interleave and mess up the state. Furthermore, it turns out we lost the RT-pull when we put the last DL task. Fix both problems by extracting the balancing from put_prev_task() and doing a multi-class balance() pass before put_prev_task(). Fixes: 67692435c411 ("sched: Rework pick_next_task() slow-path") Reported-by: Quentin Perret <qperret@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Quentin Perret <qperret@google.com> Tested-by: Valentin Schneider <valentin.schneider@arm.com>
2019-11-08 10:11:52 +00:00
static void put_prev_task_stop(struct rq *rq, struct task_struct *prev)
{
update_curr_common(rq);
}
2018-02-21 04:17:27 +00:00
/*
* scheduler tick hitting a task of our scheduling class.
*
* NOTE: This function can be called remotely by the tick offload that
* goes along full dynticks. Therefore no local assumption can be made
* and everything must be accessed through the @rq and @curr passed in
* parameters.
*/
static void task_tick_stop(struct rq *rq, struct task_struct *curr, int queued)
{
}
static void switched_to_stop(struct rq *rq, struct task_struct *p)
{
BUG(); /* its impossible to change to this class */
}
static void
prio_changed_stop(struct rq *rq, struct task_struct *p, int oldprio)
{
BUG(); /* how!?, what priority? */
}
sched: Provide update_curr callbacks for stop/idle scheduling classes Chris bisected a NULL pointer deference in task_sched_runtime() to commit 6e998916dfe3 'sched/cputime: Fix clock_nanosleep()/clock_gettime() inconsistency'. Chris observed crashes in atop or other /proc walking programs when he started fork bombs on his machine. He assumed that this is a new exit race, but that does not make any sense when looking at that commit. What's interesting is that, the commit provides update_curr callbacks for all scheduling classes except stop_task and idle_task. While nothing can ever hit that via the clock_nanosleep() and clock_gettime() interfaces, which have been the target of the commit in question, the author obviously forgot that there are other code paths which invoke task_sched_runtime() do_task_stat(() thread_group_cputime_adjusted() thread_group_cputime() task_cputime() task_sched_runtime() if (task_current(rq, p) && task_on_rq_queued(p)) { update_rq_clock(rq); up->sched_class->update_curr(rq); } If the stats are read for a stomp machine task, aka 'migration/N' and that task is current on its cpu, this will happily call the NULL pointer of stop_task->update_curr. Ooops. Chris observation that this happens faster when he runs the fork bomb makes sense as the fork bomb will kick migration threads more often so the probability to hit the issue will increase. Add the missing update_curr callbacks to the scheduler classes stop_task and idle_task. While idle tasks cannot be monitored via /proc we have other means to hit the idle case. Fixes: 6e998916dfe3 'sched/cputime: Fix clock_nanosleep()/clock_gettime() inconsistency' Reported-by: Chris Mason <clm@fb.com> Reported-and-tested-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-11-23 22:04:52 +00:00
static void update_curr_stop(struct rq *rq)
{
}
/*
* Simple, special scheduling class for the per-CPU stop tasks:
*/
DEFINE_SCHED_CLASS(stop) = {
.enqueue_task = enqueue_task_stop,
.dequeue_task = dequeue_task_stop,
.yield_task = yield_task_stop,
.wakeup_preempt = wakeup_preempt_stop,
.pick_next_task = pick_next_task_stop,
.put_prev_task = put_prev_task_stop,
.set_next_task = set_next_task_stop,
#ifdef CONFIG_SMP
sched: Fix pick_next_task() vs 'change' pattern race Commit 67692435c411 ("sched: Rework pick_next_task() slow-path") inadvertly introduced a race because it changed a previously unexplored dependency between dropping the rq->lock and sched_class::put_prev_task(). The comments about dropping rq->lock, in for example newidle_balance(), only mentions the task being current and ->on_cpu being set. But when we look at the 'change' pattern (in for example sched_setnuma()): queued = task_on_rq_queued(p); /* p->on_rq == TASK_ON_RQ_QUEUED */ running = task_current(rq, p); /* rq->curr == p */ if (queued) dequeue_task(...); if (running) put_prev_task(...); /* change task properties */ if (queued) enqueue_task(...); if (running) set_next_task(...); It becomes obvious that if we do this after put_prev_task() has already been called on @p, things go sideways. This is exactly what the commit in question allows to happen when it does: prev->sched_class->put_prev_task(rq, prev, rf); if (!rq->nr_running) newidle_balance(rq, rf); The newidle_balance() call will drop rq->lock after we've called put_prev_task() and that allows the above 'change' pattern to interleave and mess up the state. Furthermore, it turns out we lost the RT-pull when we put the last DL task. Fix both problems by extracting the balancing from put_prev_task() and doing a multi-class balance() pass before put_prev_task(). Fixes: 67692435c411 ("sched: Rework pick_next_task() slow-path") Reported-by: Quentin Perret <qperret@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Quentin Perret <qperret@google.com> Tested-by: Valentin Schneider <valentin.schneider@arm.com>
2019-11-08 10:11:52 +00:00
.balance = balance_stop,
.pick_task = pick_task_stop,
.select_task_rq = select_task_rq_stop,
.set_cpus_allowed = set_cpus_allowed_common,
#endif
.task_tick = task_tick_stop,
.prio_changed = prio_changed_stop,
.switched_to = switched_to_stop,
sched: Provide update_curr callbacks for stop/idle scheduling classes Chris bisected a NULL pointer deference in task_sched_runtime() to commit 6e998916dfe3 'sched/cputime: Fix clock_nanosleep()/clock_gettime() inconsistency'. Chris observed crashes in atop or other /proc walking programs when he started fork bombs on his machine. He assumed that this is a new exit race, but that does not make any sense when looking at that commit. What's interesting is that, the commit provides update_curr callbacks for all scheduling classes except stop_task and idle_task. While nothing can ever hit that via the clock_nanosleep() and clock_gettime() interfaces, which have been the target of the commit in question, the author obviously forgot that there are other code paths which invoke task_sched_runtime() do_task_stat(() thread_group_cputime_adjusted() thread_group_cputime() task_cputime() task_sched_runtime() if (task_current(rq, p) && task_on_rq_queued(p)) { update_rq_clock(rq); up->sched_class->update_curr(rq); } If the stats are read for a stomp machine task, aka 'migration/N' and that task is current on its cpu, this will happily call the NULL pointer of stop_task->update_curr. Ooops. Chris observation that this happens faster when he runs the fork bomb makes sense as the fork bomb will kick migration threads more often so the probability to hit the issue will increase. Add the missing update_curr callbacks to the scheduler classes stop_task and idle_task. While idle tasks cannot be monitored via /proc we have other means to hit the idle case. Fixes: 6e998916dfe3 'sched/cputime: Fix clock_nanosleep()/clock_gettime() inconsistency' Reported-by: Chris Mason <clm@fb.com> Reported-and-tested-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-11-23 22:04:52 +00:00
.update_curr = update_curr_stop,
};