linux-stable/include/linux/fsi-sbefifo.h

/* SPDX-License-Identifier: GPL-2.0-only */
/*
 * SBEFIFO FSI Client device driver
 *
 * Copyright (C) IBM Corporation 2017
 */

#ifndef LINUX_FSI_SBEFIFO_H
#define LINUX_FSI_SBEFIFO_H

#define SBEFIFO_CMD_PUT_OCC_SRAM	0xa404
#define SBEFIFO_CMD_GET_OCC_SRAM	0xa403
#define SBEFIFO_CMD_GET_SBE_FFDC	0xa801

#define SBEFIFO_MAX_FFDC_SIZE		0x2000

struct device;

int sbefifo_submit(struct device *dev, const __be32 *command, size_t cmd_len,
		   __be32 *response, size_t *resp_len);

int sbefifo_parse_status(struct device *dev, u16 cmd, __be32 *response,
			 size_t resp_len, size_t *data_len);

#endif /* LINUX_FSI_SBEFIFO_H */
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 469 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of mergchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 2 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081202.997941624@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2019-06-04 08:11:02 +00:00			`/* SPDX-License-Identifier: GPL-2.0-only */`
fsi/sbefifo: Add driver for the SBE FIFO This driver provides an in-kernel and a user API for accessing the command FIFO of the SBE (Self Boot Engine) of the POWER9 processor, via the FSI bus. It provides an in-kernel interface to submit command and receive responses, along with a helper to locate and analyse the response status block. It's a simple synchronous submit() type API. The user interface uses the write/read interface that an earlier version of this driver already provided, however it has some specific limitations in order to keep the driver simple and avoid using up a lot of kernel memory: - The user should perform a single write() with the command and a single read() to get the response (with a buffer big enough to hold the entire response). - On a write() the command is simply "stored" into a kernel buffer, it is submitted as one operation on the subsequent read(). This allows to have the code write directly from the FIFO into the user buffer and avoid hogging the SBE between the write() and read() syscall as it's critical that the SBE be freed asap to respond to the host. An extra write() will simply replace the previously written command. - A write of a single 4 bytes containing the value 0x52534554 in big endian will trigger a reset request. No read is necessary, the write() call will return when the reset has been acknowledged or times out. - The command is limited to 4K bytes. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by: Joel Stanley <joel@jms.id.au> --- 2018-05-17 05:58:00 +00:00			`/*`
			`* SBEFIFO FSI Client device driver`
			`*`
			`* Copyright (C) IBM Corporation 2017`
			`*/`

			`#ifndef LINUX_FSI_SBEFIFO_H`
			`#define LINUX_FSI_SBEFIFO_H`

			`#define SBEFIFO_CMD_PUT_OCC_SRAM 0xa404`
			`#define SBEFIFO_CMD_GET_OCC_SRAM 0xa403`
			`#define SBEFIFO_CMD_GET_SBE_FFDC 0xa801`

			`#define SBEFIFO_MAX_FFDC_SIZE 0x2000`

			`struct device;`

			`int sbefifo_submit(struct device dev, const __be32 command, size_t cmd_len,`
			`__be32 response, size_t resp_len);`

			`int sbefifo_parse_status(struct device dev, u16 cmd, __be32 response,`
			`size_t resp_len, size_t *data_len);`

			`#endif /* LINUX_FSI_SBEFIFO_H */`