2019-05-19 13:51:43 +00:00
|
|
|
// SPDX-License-Identifier: GPL-2.0-or-later
|
2005-08-31 16:53:10 +00:00
|
|
|
/*
|
|
|
|
* ASIX AX8817X based USB 2.0 Ethernet Devices
|
2006-07-29 14:12:50 +00:00
|
|
|
* Copyright (C) 2003-2006 David Hollis <dhollis@davehollis.com>
|
2005-08-31 16:53:10 +00:00
|
|
|
* Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
|
2006-07-29 14:12:50 +00:00
|
|
|
* Copyright (C) 2006 James Painter <jamie.painter@iname.com>
|
2005-08-31 16:53:10 +00:00
|
|
|
* Copyright (c) 2002-2003 TiVo Inc.
|
|
|
|
*/
|
|
|
|
|
2012-07-13 05:26:30 +00:00
|
|
|
#include "asix.h"
|
2006-07-29 14:12:50 +00:00
|
|
|
|
|
|
|
#define PHY_MODE_MARVELL 0x0000
|
|
|
|
#define MII_MARVELL_LED_CTRL 0x0018
|
|
|
|
#define MII_MARVELL_STATUS 0x001b
|
|
|
|
#define MII_MARVELL_CTRL 0x0014
|
|
|
|
|
|
|
|
#define MARVELL_LED_MANUAL 0x0019
|
|
|
|
|
|
|
|
#define MARVELL_STATUS_HWCFG 0x0004
|
|
|
|
|
|
|
|
#define MARVELL_CTRL_TXDELAY 0x0002
|
|
|
|
#define MARVELL_CTRL_RXDELAY 0x0080
|
2005-08-31 16:53:10 +00:00
|
|
|
|
2011-11-15 07:12:39 +00:00
|
|
|
#define PHY_MODE_RTL8211CL 0x000C
|
2011-10-04 09:55:17 +00:00
|
|
|
|
2016-08-29 13:32:17 +00:00
|
|
|
#define AX88772A_PHY14H 0x14
|
|
|
|
#define AX88772A_PHY14H_DEFAULT 0x442C
|
|
|
|
|
|
|
|
#define AX88772A_PHY15H 0x15
|
|
|
|
#define AX88772A_PHY15H_DEFAULT 0x03C8
|
|
|
|
|
|
|
|
#define AX88772A_PHY16H 0x16
|
|
|
|
#define AX88772A_PHY16H_DEFAULT 0x4044
|
|
|
|
|
2005-08-31 16:53:10 +00:00
|
|
|
struct ax88172_int_data {
|
2007-12-22 17:42:36 +00:00
|
|
|
__le16 res1;
|
2005-08-31 16:53:10 +00:00
|
|
|
u8 link;
|
2007-12-22 17:42:36 +00:00
|
|
|
__le16 res2;
|
2005-08-31 16:53:10 +00:00
|
|
|
u8 status;
|
2007-12-22 17:42:36 +00:00
|
|
|
__le16 res3;
|
2010-06-02 18:10:09 +00:00
|
|
|
} __packed;
|
2005-08-31 16:53:10 +00:00
|
|
|
|
2006-07-29 14:12:50 +00:00
|
|
|
static void asix_status(struct usbnet *dev, struct urb *urb)
|
|
|
|
{
|
|
|
|
struct ax88172_int_data *event;
|
|
|
|
int link;
|
|
|
|
|
|
|
|
if (urb->actual_length < 8)
|
|
|
|
return;
|
|
|
|
|
|
|
|
event = urb->transfer_buffer;
|
|
|
|
link = event->link & 0x01;
|
|
|
|
if (netif_carrier_ok(dev->net) != link) {
|
2013-04-11 04:40:34 +00:00
|
|
|
usbnet_link_change(dev, link, 1);
|
2010-02-17 10:30:23 +00:00
|
|
|
netdev_dbg(dev->net, "Link Status is: %d\n", link);
|
2006-07-29 14:12:50 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2012-11-21 21:35:17 +00:00
|
|
|
static void asix_set_netdev_dev_addr(struct usbnet *dev, u8 *addr)
|
|
|
|
{
|
|
|
|
if (is_valid_ether_addr(addr)) {
|
|
|
|
memcpy(dev->net->dev_addr, addr, ETH_ALEN);
|
|
|
|
} else {
|
|
|
|
netdev_info(dev->net, "invalid hw address, using random\n");
|
|
|
|
eth_hw_addr_random(dev->net);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2006-07-29 14:12:50 +00:00
|
|
|
/* Get the PHY Identifier from the PHYSID1 & PHYSID2 MII registers */
|
|
|
|
static u32 asix_get_phyid(struct usbnet *dev)
|
2005-08-31 16:53:10 +00:00
|
|
|
{
|
2006-07-29 14:12:50 +00:00
|
|
|
int phy_reg;
|
|
|
|
u32 phy_id;
|
2011-11-15 07:12:40 +00:00
|
|
|
int i;
|
2005-08-31 16:53:10 +00:00
|
|
|
|
2011-11-15 07:12:40 +00:00
|
|
|
/* Poll for the rare case the FW or phy isn't ready yet. */
|
|
|
|
for (i = 0; i < 100; i++) {
|
|
|
|
phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1);
|
2016-08-29 13:32:16 +00:00
|
|
|
if (phy_reg < 0)
|
|
|
|
return 0;
|
2011-11-15 07:12:40 +00:00
|
|
|
if (phy_reg != 0 && phy_reg != 0xFFFF)
|
|
|
|
break;
|
|
|
|
mdelay(1);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (phy_reg <= 0 || phy_reg == 0xFFFF)
|
2006-07-29 14:12:50 +00:00
|
|
|
return 0;
|
2005-08-31 16:53:10 +00:00
|
|
|
|
2006-07-29 14:12:50 +00:00
|
|
|
phy_id = (phy_reg & 0xffff) << 16;
|
2005-08-31 16:53:10 +00:00
|
|
|
|
2006-07-29 14:12:50 +00:00
|
|
|
phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID2);
|
|
|
|
if (phy_reg < 0)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
phy_id |= (phy_reg & 0xffff);
|
|
|
|
|
|
|
|
return phy_id;
|
2005-08-31 16:53:10 +00:00
|
|
|
}
|
|
|
|
|
2006-07-29 14:12:50 +00:00
|
|
|
static u32 asix_get_link(struct net_device *net)
|
|
|
|
{
|
|
|
|
struct usbnet *dev = netdev_priv(net);
|
|
|
|
|
|
|
|
return mii_link_ok(&dev->mii);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int asix_ioctl (struct net_device *net, struct ifreq *rq, int cmd)
|
|
|
|
{
|
|
|
|
struct usbnet *dev = netdev_priv(net);
|
|
|
|
|
|
|
|
return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* We need to override some ethtool_ops so we require our
|
|
|
|
own structure so we don't interfere with other usbnet
|
|
|
|
devices that may be connected at the same time. */
|
2009-09-02 08:03:33 +00:00
|
|
|
static const struct ethtool_ops ax88172_ethtool_ops = {
|
2006-07-29 14:12:50 +00:00
|
|
|
.get_drvinfo = asix_get_drvinfo,
|
|
|
|
.get_link = asix_get_link,
|
|
|
|
.get_msglevel = usbnet_get_msglevel,
|
2005-08-31 16:53:10 +00:00
|
|
|
.set_msglevel = usbnet_set_msglevel,
|
2006-03-29 01:15:42 +00:00
|
|
|
.get_wol = asix_get_wol,
|
|
|
|
.set_wol = asix_set_wol,
|
|
|
|
.get_eeprom_len = asix_get_eeprom_len,
|
|
|
|
.get_eeprom = asix_get_eeprom,
|
2012-07-19 00:23:07 +00:00
|
|
|
.set_eeprom = asix_set_eeprom,
|
2006-10-08 22:08:01 +00:00
|
|
|
.nway_reset = usbnet_nway_reset,
|
2021-04-05 23:13:41 +00:00
|
|
|
.get_link_ksettings = usbnet_get_link_ksettings_mii,
|
|
|
|
.set_link_ksettings = usbnet_set_link_ksettings_mii,
|
2005-08-31 16:53:10 +00:00
|
|
|
};
|
|
|
|
|
2006-07-29 14:12:50 +00:00
|
|
|
static void ax88172_set_multicast(struct net_device *net)
|
2005-08-31 16:53:10 +00:00
|
|
|
{
|
|
|
|
struct usbnet *dev = netdev_priv(net);
|
2006-07-29 14:12:50 +00:00
|
|
|
struct asix_data *data = (struct asix_data *)&dev->data;
|
|
|
|
u8 rx_ctl = 0x8c;
|
2005-08-31 16:53:10 +00:00
|
|
|
|
2006-07-29 14:12:50 +00:00
|
|
|
if (net->flags & IFF_PROMISC) {
|
|
|
|
rx_ctl |= 0x01;
|
2009-12-03 07:58:21 +00:00
|
|
|
} else if (net->flags & IFF_ALLMULTI ||
|
2010-02-08 04:30:35 +00:00
|
|
|
netdev_mc_count(net) > AX_MAX_MCAST) {
|
2006-07-29 14:12:50 +00:00
|
|
|
rx_ctl |= 0x02;
|
2010-02-08 04:30:35 +00:00
|
|
|
} else if (netdev_mc_empty(net)) {
|
2006-07-29 14:12:50 +00:00
|
|
|
/* just broadcast and directed */
|
|
|
|
} else {
|
|
|
|
/* We use the 20 byte dev->data
|
|
|
|
* for our 8 byte filter buffer
|
|
|
|
* to avoid allocating memory that
|
|
|
|
* is tricky to free later */
|
2010-04-01 21:22:57 +00:00
|
|
|
struct netdev_hw_addr *ha;
|
2006-07-29 14:12:50 +00:00
|
|
|
u32 crc_bits;
|
|
|
|
|
|
|
|
memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE);
|
|
|
|
|
|
|
|
/* Build the multicast hash filter. */
|
2010-04-01 21:22:57 +00:00
|
|
|
netdev_for_each_mc_addr(ha, net) {
|
|
|
|
crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26;
|
2006-07-29 14:12:50 +00:00
|
|
|
data->multi_filter[crc_bits >> 3] |=
|
|
|
|
1 << (crc_bits & 7);
|
|
|
|
}
|
|
|
|
|
|
|
|
asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0,
|
|
|
|
AX_MCAST_FILTER_SIZE, data->multi_filter);
|
|
|
|
|
|
|
|
rx_ctl |= 0x10;
|
|
|
|
}
|
|
|
|
|
|
|
|
asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ax88172_link_reset(struct usbnet *dev)
|
|
|
|
{
|
|
|
|
u8 mode;
|
2011-04-27 18:32:38 +00:00
|
|
|
struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
|
2006-07-29 14:12:50 +00:00
|
|
|
|
|
|
|
mii_check_media(&dev->mii, 1, 1);
|
|
|
|
mii_ethtool_gset(&dev->mii, &ecmd);
|
|
|
|
mode = AX88172_MEDIUM_DEFAULT;
|
|
|
|
|
|
|
|
if (ecmd.duplex != DUPLEX_FULL)
|
|
|
|
mode |= ~AX88172_MEDIUM_FD;
|
|
|
|
|
2011-04-27 18:32:38 +00:00
|
|
|
netdev_dbg(dev->net, "ax88172_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
|
|
|
|
ethtool_cmd_speed(&ecmd), ecmd.duplex, mode);
|
2006-07-29 14:12:50 +00:00
|
|
|
|
2016-08-29 13:32:15 +00:00
|
|
|
asix_write_medium_mode(dev, mode, 0);
|
2006-07-29 14:12:50 +00:00
|
|
|
|
|
|
|
return 0;
|
2005-08-31 16:53:10 +00:00
|
|
|
}
|
|
|
|
|
2009-03-20 19:35:55 +00:00
|
|
|
static const struct net_device_ops ax88172_netdev_ops = {
|
|
|
|
.ndo_open = usbnet_open,
|
|
|
|
.ndo_stop = usbnet_stop,
|
|
|
|
.ndo_start_xmit = usbnet_start_xmit,
|
|
|
|
.ndo_tx_timeout = usbnet_tx_timeout,
|
|
|
|
.ndo_change_mtu = usbnet_change_mtu,
|
2020-11-10 19:51:03 +00:00
|
|
|
.ndo_get_stats64 = dev_get_tstats64,
|
2009-03-20 19:35:55 +00:00
|
|
|
.ndo_set_mac_address = eth_mac_addr,
|
|
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
|
|
.ndo_do_ioctl = asix_ioctl,
|
2011-08-16 06:29:01 +00:00
|
|
|
.ndo_set_rx_mode = ax88172_set_multicast,
|
2009-03-20 19:35:55 +00:00
|
|
|
};
|
|
|
|
|
2016-08-29 13:32:18 +00:00
|
|
|
static void asix_phy_reset(struct usbnet *dev, unsigned int reset_bits)
|
|
|
|
{
|
|
|
|
unsigned int timeout = 5000;
|
|
|
|
|
|
|
|
asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, reset_bits);
|
|
|
|
|
|
|
|
/* give phy_id a chance to process reset */
|
|
|
|
udelay(500);
|
|
|
|
|
|
|
|
/* See IEEE 802.3 "22.2.4.1.1 Reset": 500ms max */
|
|
|
|
while (timeout--) {
|
|
|
|
if (asix_mdio_read(dev->net, dev->mii.phy_id, MII_BMCR)
|
|
|
|
& BMCR_RESET)
|
|
|
|
udelay(100);
|
|
|
|
else
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
netdev_err(dev->net, "BMCR_RESET timeout on phy_id %d\n",
|
|
|
|
dev->mii.phy_id);
|
|
|
|
}
|
|
|
|
|
2006-03-29 01:15:42 +00:00
|
|
|
static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
|
2005-08-31 16:53:10 +00:00
|
|
|
{
|
|
|
|
int ret = 0;
|
2019-07-02 00:10:08 +00:00
|
|
|
u8 buf[ETH_ALEN] = {0};
|
2005-08-31 16:53:10 +00:00
|
|
|
int i;
|
|
|
|
unsigned long gpio_bits = dev->driver_info->data;
|
|
|
|
|
|
|
|
usbnet_get_endpoints(dev,intf);
|
|
|
|
|
|
|
|
/* Toggle the GPIOs in a manufacturer/model specific way */
|
|
|
|
for (i = 2; i >= 0; i--) {
|
2011-10-04 09:55:18 +00:00
|
|
|
ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS,
|
2016-08-29 13:32:15 +00:00
|
|
|
(gpio_bits >> (i * 8)) & 0xff, 0, 0, NULL, 0);
|
2011-10-04 09:55:18 +00:00
|
|
|
if (ret < 0)
|
2007-12-22 17:42:36 +00:00
|
|
|
goto out;
|
2005-08-31 16:53:10 +00:00
|
|
|
msleep(5);
|
|
|
|
}
|
|
|
|
|
2016-08-29 13:32:15 +00:00
|
|
|
ret = asix_write_rx_ctl(dev, 0x80, 0);
|
2011-10-04 09:55:18 +00:00
|
|
|
if (ret < 0)
|
2007-12-22 17:42:36 +00:00
|
|
|
goto out;
|
2005-08-31 16:53:10 +00:00
|
|
|
|
|
|
|
/* Get the MAC address */
|
2016-08-29 13:32:15 +00:00
|
|
|
ret = asix_read_cmd(dev, AX88172_CMD_READ_NODE_ID,
|
|
|
|
0, 0, ETH_ALEN, buf, 0);
|
2011-10-04 09:55:18 +00:00
|
|
|
if (ret < 0) {
|
2012-09-19 09:46:14 +00:00
|
|
|
netdev_dbg(dev->net, "read AX_CMD_READ_NODE_ID failed: %d\n",
|
|
|
|
ret);
|
2007-12-22 17:42:36 +00:00
|
|
|
goto out;
|
2005-08-31 16:53:10 +00:00
|
|
|
}
|
2012-11-21 21:35:17 +00:00
|
|
|
|
|
|
|
asix_set_netdev_dev_addr(dev, buf);
|
2005-08-31 16:53:10 +00:00
|
|
|
|
|
|
|
/* Initialize MII structure */
|
|
|
|
dev->mii.dev = dev->net;
|
2006-03-29 01:15:42 +00:00
|
|
|
dev->mii.mdio_read = asix_mdio_read;
|
|
|
|
dev->mii.mdio_write = asix_mdio_write;
|
2005-08-31 16:53:10 +00:00
|
|
|
dev->mii.phy_id_mask = 0x3f;
|
|
|
|
dev->mii.reg_num_mask = 0x1f;
|
2021-06-07 08:27:21 +00:00
|
|
|
|
|
|
|
dev->mii.phy_id = asix_read_phy_addr(dev, true);
|
|
|
|
if (dev->mii.phy_id < 0)
|
|
|
|
return dev->mii.phy_id;
|
2005-08-31 16:53:10 +00:00
|
|
|
|
2009-03-20 19:35:55 +00:00
|
|
|
dev->net->netdev_ops = &ax88172_netdev_ops;
|
2006-03-29 01:15:42 +00:00
|
|
|
dev->net->ethtool_ops = &ax88172_ethtool_ops;
|
2012-07-05 04:31:01 +00:00
|
|
|
dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */
|
|
|
|
dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */
|
2005-08-31 16:53:10 +00:00
|
|
|
|
2016-08-29 13:32:18 +00:00
|
|
|
asix_phy_reset(dev, BMCR_RESET);
|
2006-07-29 14:12:50 +00:00
|
|
|
asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
|
2005-08-31 16:53:10 +00:00
|
|
|
ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
|
|
|
|
mii_nway_restart(&dev->mii);
|
|
|
|
|
|
|
|
return 0;
|
2007-12-22 17:42:36 +00:00
|
|
|
|
|
|
|
out:
|
2005-08-31 16:53:10 +00:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2021-06-07 08:27:24 +00:00
|
|
|
static void ax88772_ethtool_get_strings(struct net_device *netdev, u32 sset,
|
|
|
|
u8 *data)
|
|
|
|
{
|
|
|
|
switch (sset) {
|
|
|
|
case ETH_SS_TEST:
|
|
|
|
net_selftest_get_strings(data);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ax88772_ethtool_get_sset_count(struct net_device *ndev, int sset)
|
|
|
|
{
|
|
|
|
switch (sset) {
|
|
|
|
case ETH_SS_TEST:
|
|
|
|
return net_selftest_get_count();
|
|
|
|
default:
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2009-09-02 08:03:33 +00:00
|
|
|
static const struct ethtool_ops ax88772_ethtool_ops = {
|
2006-03-29 01:15:42 +00:00
|
|
|
.get_drvinfo = asix_get_drvinfo,
|
2021-06-07 08:27:23 +00:00
|
|
|
.get_link = usbnet_get_link,
|
2005-08-31 16:53:10 +00:00
|
|
|
.get_msglevel = usbnet_get_msglevel,
|
|
|
|
.set_msglevel = usbnet_set_msglevel,
|
2006-03-29 01:15:42 +00:00
|
|
|
.get_wol = asix_get_wol,
|
|
|
|
.set_wol = asix_set_wol,
|
|
|
|
.get_eeprom_len = asix_get_eeprom_len,
|
|
|
|
.get_eeprom = asix_get_eeprom,
|
2012-07-19 00:23:07 +00:00
|
|
|
.set_eeprom = asix_set_eeprom,
|
2021-06-07 08:27:23 +00:00
|
|
|
.nway_reset = phy_ethtool_nway_reset,
|
|
|
|
.get_link_ksettings = phy_ethtool_get_link_ksettings,
|
|
|
|
.set_link_ksettings = phy_ethtool_set_link_ksettings,
|
2021-06-07 08:27:24 +00:00
|
|
|
.self_test = net_selftest,
|
|
|
|
.get_strings = ax88772_ethtool_get_strings,
|
|
|
|
.get_sset_count = ax88772_ethtool_get_sset_count,
|
2005-08-31 16:53:10 +00:00
|
|
|
};
|
|
|
|
|
2011-10-04 09:55:16 +00:00
|
|
|
static int ax88772_reset(struct usbnet *dev)
|
2016-08-29 13:32:15 +00:00
|
|
|
{
|
|
|
|
struct asix_data *data = (struct asix_data *)&dev->data;
|
2021-06-07 08:27:23 +00:00
|
|
|
struct asix_common_private *priv = dev->driver_priv;
|
2016-08-29 13:32:15 +00:00
|
|
|
int ret;
|
|
|
|
|
|
|
|
/* Rewrite MAC address */
|
|
|
|
ether_addr_copy(data->mac_addr, dev->net->dev_addr);
|
|
|
|
ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0,
|
|
|
|
ETH_ALEN, data->mac_addr, 0);
|
|
|
|
if (ret < 0)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
/* Set RX_CTL to default values with 2k buffer, and enable cactus */
|
|
|
|
ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, 0);
|
|
|
|
if (ret < 0)
|
|
|
|
goto out;
|
|
|
|
|
2017-02-28 11:58:22 +00:00
|
|
|
ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT, 0);
|
2016-08-29 13:32:15 +00:00
|
|
|
if (ret < 0)
|
|
|
|
goto out;
|
|
|
|
|
2021-06-07 08:27:23 +00:00
|
|
|
phy_start(priv->phydev);
|
|
|
|
|
2016-08-29 13:32:15 +00:00
|
|
|
return 0;
|
|
|
|
|
|
|
|
out:
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ax88772_hw_reset(struct usbnet *dev, int in_pm)
|
2005-08-31 16:53:10 +00:00
|
|
|
{
|
2012-01-10 06:40:17 +00:00
|
|
|
struct asix_data *data = (struct asix_data *)&dev->data;
|
2007-01-11 23:39:16 +00:00
|
|
|
int ret, embd_phy;
|
2006-07-29 14:12:50 +00:00
|
|
|
u16 rx_ctl;
|
2005-08-31 16:53:10 +00:00
|
|
|
|
2016-08-29 13:32:15 +00:00
|
|
|
ret = asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_2 |
|
|
|
|
AX_GPIO_GPO2EN, 5, in_pm);
|
2011-10-04 09:55:18 +00:00
|
|
|
if (ret < 0)
|
2007-12-22 17:42:36 +00:00
|
|
|
goto out;
|
2005-08-31 16:53:10 +00:00
|
|
|
|
2016-08-29 13:32:15 +00:00
|
|
|
embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0);
|
2011-10-04 09:55:16 +00:00
|
|
|
|
2016-08-29 13:32:15 +00:00
|
|
|
ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy,
|
|
|
|
0, 0, NULL, in_pm);
|
2011-10-04 09:55:18 +00:00
|
|
|
if (ret < 0) {
|
2012-09-19 09:46:14 +00:00
|
|
|
netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
|
2007-12-22 17:42:36 +00:00
|
|
|
goto out;
|
2005-08-31 16:53:10 +00:00
|
|
|
}
|
|
|
|
|
2016-08-29 13:32:15 +00:00
|
|
|
if (embd_phy) {
|
|
|
|
ret = asix_sw_reset(dev, AX_SWRESET_IPPD, in_pm);
|
|
|
|
if (ret < 0)
|
|
|
|
goto out;
|
2005-08-31 16:53:10 +00:00
|
|
|
|
2016-08-29 13:32:15 +00:00
|
|
|
usleep_range(10000, 11000);
|
2011-10-04 09:55:18 +00:00
|
|
|
|
2016-08-29 13:32:15 +00:00
|
|
|
ret = asix_sw_reset(dev, AX_SWRESET_CLEAR, in_pm);
|
|
|
|
if (ret < 0)
|
|
|
|
goto out;
|
2005-08-31 16:53:10 +00:00
|
|
|
|
2016-08-29 13:32:15 +00:00
|
|
|
msleep(60);
|
2011-10-04 09:55:16 +00:00
|
|
|
|
2016-08-29 13:32:15 +00:00
|
|
|
ret = asix_sw_reset(dev, AX_SWRESET_IPRL | AX_SWRESET_PRL,
|
|
|
|
in_pm);
|
2011-10-04 09:55:18 +00:00
|
|
|
if (ret < 0)
|
2007-12-22 17:42:36 +00:00
|
|
|
goto out;
|
2011-10-04 09:55:18 +00:00
|
|
|
} else {
|
2016-08-29 13:32:15 +00:00
|
|
|
ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL,
|
|
|
|
in_pm);
|
2011-10-04 09:55:18 +00:00
|
|
|
if (ret < 0)
|
2007-12-22 17:42:36 +00:00
|
|
|
goto out;
|
2007-01-11 23:39:16 +00:00
|
|
|
}
|
2005-08-31 16:53:10 +00:00
|
|
|
|
|
|
|
msleep(150);
|
2016-08-29 13:32:15 +00:00
|
|
|
|
|
|
|
if (in_pm && (!asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
|
|
|
|
MII_PHYSID1))){
|
|
|
|
ret = -EIO;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm);
|
|
|
|
if (ret < 0)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT, in_pm);
|
2011-10-04 09:55:18 +00:00
|
|
|
if (ret < 0)
|
2007-12-22 17:42:36 +00:00
|
|
|
goto out;
|
2005-08-31 16:53:10 +00:00
|
|
|
|
2016-08-29 13:32:15 +00:00
|
|
|
ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
|
|
|
|
AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
|
|
|
|
AX88772_IPG2_DEFAULT, 0, NULL, in_pm);
|
|
|
|
if (ret < 0) {
|
|
|
|
netdev_dbg(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
|
|
|
|
goto out;
|
|
|
|
}
|
2006-07-29 14:12:50 +00:00
|
|
|
|
2016-08-29 13:32:15 +00:00
|
|
|
/* Rewrite MAC address */
|
|
|
|
ether_addr_copy(data->mac_addr, dev->net->dev_addr);
|
|
|
|
ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0,
|
|
|
|
ETH_ALEN, data->mac_addr, in_pm);
|
2011-10-04 09:55:18 +00:00
|
|
|
if (ret < 0)
|
2007-12-22 17:42:36 +00:00
|
|
|
goto out;
|
2005-08-31 16:53:10 +00:00
|
|
|
|
2016-08-29 13:32:15 +00:00
|
|
|
/* Set RX_CTL to default values with 2k buffer, and enable cactus */
|
|
|
|
ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm);
|
|
|
|
if (ret < 0)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
rx_ctl = asix_read_rx_ctl(dev, in_pm);
|
|
|
|
netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
|
|
|
|
rx_ctl);
|
|
|
|
|
|
|
|
rx_ctl = asix_read_medium_status(dev, in_pm);
|
|
|
|
netdev_dbg(dev->net,
|
|
|
|
"Medium Status is 0x%04x after all initializations\n",
|
|
|
|
rx_ctl);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
out:
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ax88772a_hw_reset(struct usbnet *dev, int in_pm)
|
|
|
|
{
|
|
|
|
struct asix_data *data = (struct asix_data *)&dev->data;
|
|
|
|
int ret, embd_phy;
|
2016-08-29 13:32:17 +00:00
|
|
|
u16 rx_ctl, phy14h, phy15h, phy16h;
|
2016-08-29 13:32:15 +00:00
|
|
|
u8 chipcode = 0;
|
2006-03-29 01:15:42 +00:00
|
|
|
|
2016-08-29 13:32:15 +00:00
|
|
|
ret = asix_write_gpio(dev, AX_GPIO_RSE, 5, in_pm);
|
2011-10-04 09:55:18 +00:00
|
|
|
if (ret < 0)
|
2007-12-22 17:42:36 +00:00
|
|
|
goto out;
|
2005-08-31 16:53:10 +00:00
|
|
|
|
2016-08-29 13:32:15 +00:00
|
|
|
embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0);
|
2005-08-31 16:53:10 +00:00
|
|
|
|
2016-08-29 13:32:15 +00:00
|
|
|
ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy |
|
|
|
|
AX_PHYSEL_SSEN, 0, 0, NULL, in_pm);
|
|
|
|
if (ret < 0) {
|
|
|
|
netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
usleep_range(10000, 11000);
|
2005-08-31 16:53:10 +00:00
|
|
|
|
2016-08-29 13:32:15 +00:00
|
|
|
ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_IPRL, in_pm);
|
2011-10-04 09:55:18 +00:00
|
|
|
if (ret < 0)
|
2007-12-22 17:42:36 +00:00
|
|
|
goto out;
|
2005-08-31 16:53:10 +00:00
|
|
|
|
2016-08-29 13:32:15 +00:00
|
|
|
usleep_range(10000, 11000);
|
|
|
|
|
|
|
|
ret = asix_sw_reset(dev, AX_SWRESET_IPRL, in_pm);
|
|
|
|
if (ret < 0)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
msleep(160);
|
|
|
|
|
|
|
|
ret = asix_sw_reset(dev, AX_SWRESET_CLEAR, in_pm);
|
|
|
|
if (ret < 0)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
ret = asix_sw_reset(dev, AX_SWRESET_IPRL, in_pm);
|
|
|
|
if (ret < 0)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
msleep(200);
|
|
|
|
|
|
|
|
if (in_pm && (!asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
|
|
|
|
MII_PHYSID1))) {
|
|
|
|
ret = -1;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0,
|
|
|
|
0, 1, &chipcode, in_pm);
|
|
|
|
if (ret < 0)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
if ((chipcode & AX_CHIPCODE_MASK) == AX_AX88772B_CHIPCODE) {
|
|
|
|
ret = asix_write_cmd(dev, AX_QCTCTRL, 0x8000, 0x8001,
|
|
|
|
0, NULL, in_pm);
|
|
|
|
if (ret < 0) {
|
|
|
|
netdev_dbg(dev->net, "Write BQ setting failed: %d\n",
|
|
|
|
ret);
|
|
|
|
goto out;
|
|
|
|
}
|
2016-08-29 13:32:17 +00:00
|
|
|
} else if ((chipcode & AX_CHIPCODE_MASK) == AX_AX88772A_CHIPCODE) {
|
|
|
|
/* Check if the PHY registers have default settings */
|
|
|
|
phy14h = asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
|
|
|
|
AX88772A_PHY14H);
|
|
|
|
phy15h = asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
|
|
|
|
AX88772A_PHY15H);
|
|
|
|
phy16h = asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
|
|
|
|
AX88772A_PHY16H);
|
|
|
|
|
|
|
|
netdev_dbg(dev->net,
|
|
|
|
"772a_hw_reset: MR20=0x%x MR21=0x%x MR22=0x%x\n",
|
|
|
|
phy14h, phy15h, phy16h);
|
|
|
|
|
|
|
|
/* Restore PHY registers default setting if not */
|
|
|
|
if (phy14h != AX88772A_PHY14H_DEFAULT)
|
|
|
|
asix_mdio_write_nopm(dev->net, dev->mii.phy_id,
|
|
|
|
AX88772A_PHY14H,
|
|
|
|
AX88772A_PHY14H_DEFAULT);
|
|
|
|
if (phy15h != AX88772A_PHY15H_DEFAULT)
|
|
|
|
asix_mdio_write_nopm(dev->net, dev->mii.phy_id,
|
|
|
|
AX88772A_PHY15H,
|
|
|
|
AX88772A_PHY15H_DEFAULT);
|
|
|
|
if (phy16h != AX88772A_PHY16H_DEFAULT)
|
|
|
|
asix_mdio_write_nopm(dev->net, dev->mii.phy_id,
|
|
|
|
AX88772A_PHY16H,
|
|
|
|
AX88772A_PHY16H_DEFAULT);
|
2016-08-29 13:32:15 +00:00
|
|
|
}
|
|
|
|
|
2011-10-04 09:55:18 +00:00
|
|
|
ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
|
2005-08-31 16:53:10 +00:00
|
|
|
AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
|
2016-08-29 13:32:15 +00:00
|
|
|
AX88772_IPG2_DEFAULT, 0, NULL, in_pm);
|
2011-10-04 09:55:18 +00:00
|
|
|
if (ret < 0) {
|
2012-09-19 09:46:14 +00:00
|
|
|
netdev_dbg(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
|
2007-12-22 17:42:36 +00:00
|
|
|
goto out;
|
2005-08-31 16:53:10 +00:00
|
|
|
}
|
|
|
|
|
2012-01-10 06:40:17 +00:00
|
|
|
/* Rewrite MAC address */
|
|
|
|
memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
|
|
|
|
ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
|
2016-08-29 13:32:15 +00:00
|
|
|
data->mac_addr, in_pm);
|
|
|
|
if (ret < 0)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
/* Set RX_CTL to default values with 2k buffer, and enable cactus */
|
|
|
|
ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm);
|
2012-01-10 06:40:17 +00:00
|
|
|
if (ret < 0)
|
|
|
|
goto out;
|
|
|
|
|
2016-08-29 13:32:15 +00:00
|
|
|
ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT, in_pm);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
2005-08-31 16:53:10 +00:00
|
|
|
/* Set RX_CTL to default values with 2k buffer, and enable cactus */
|
2016-08-29 13:32:15 +00:00
|
|
|
ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm);
|
2011-10-04 09:55:18 +00:00
|
|
|
if (ret < 0)
|
2007-12-22 17:42:36 +00:00
|
|
|
goto out;
|
2005-08-31 16:53:10 +00:00
|
|
|
|
2016-08-29 13:32:15 +00:00
|
|
|
rx_ctl = asix_read_rx_ctl(dev, in_pm);
|
2012-09-19 09:46:14 +00:00
|
|
|
netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
|
|
|
|
rx_ctl);
|
2006-07-29 14:12:50 +00:00
|
|
|
|
2016-08-29 13:32:15 +00:00
|
|
|
rx_ctl = asix_read_medium_status(dev, in_pm);
|
2012-09-19 09:46:14 +00:00
|
|
|
netdev_dbg(dev->net,
|
|
|
|
"Medium Status is 0x%04x after all initializations\n",
|
|
|
|
rx_ctl);
|
2006-07-29 14:12:50 +00:00
|
|
|
|
2011-10-04 09:55:16 +00:00
|
|
|
return 0;
|
|
|
|
|
|
|
|
out:
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct net_device_ops ax88772_netdev_ops = {
|
|
|
|
.ndo_open = usbnet_open,
|
|
|
|
.ndo_stop = usbnet_stop,
|
|
|
|
.ndo_start_xmit = usbnet_start_xmit,
|
|
|
|
.ndo_tx_timeout = usbnet_tx_timeout,
|
|
|
|
.ndo_change_mtu = usbnet_change_mtu,
|
2020-11-10 19:51:03 +00:00
|
|
|
.ndo_get_stats64 = dev_get_tstats64,
|
2011-10-04 09:55:16 +00:00
|
|
|
.ndo_set_mac_address = asix_set_mac_address,
|
|
|
|
.ndo_validate_addr = eth_validate_addr,
|
2021-06-07 08:27:23 +00:00
|
|
|
.ndo_do_ioctl = phy_do_ioctl_running,
|
2011-10-04 09:55:16 +00:00
|
|
|
.ndo_set_rx_mode = asix_set_multicast,
|
|
|
|
};
|
|
|
|
|
2016-08-29 13:32:15 +00:00
|
|
|
static void ax88772_suspend(struct usbnet *dev)
|
|
|
|
{
|
|
|
|
struct asix_common_private *priv = dev->driver_priv;
|
2016-08-29 13:32:17 +00:00
|
|
|
u16 medium;
|
|
|
|
|
2021-06-11 03:55:59 +00:00
|
|
|
if (netif_running(dev->net))
|
|
|
|
phy_stop(priv->phydev);
|
|
|
|
|
2016-08-29 13:32:17 +00:00
|
|
|
/* Stop MAC operation */
|
2016-11-30 08:29:08 +00:00
|
|
|
medium = asix_read_medium_status(dev, 1);
|
2016-08-29 13:32:17 +00:00
|
|
|
medium &= ~AX_MEDIUM_RE;
|
2016-11-30 08:29:08 +00:00
|
|
|
asix_write_medium_mode(dev, medium, 1);
|
2016-08-29 13:32:17 +00:00
|
|
|
|
|
|
|
netdev_dbg(dev->net, "ax88772_suspend: medium=0x%04x\n",
|
2016-11-30 08:29:08 +00:00
|
|
|
asix_read_medium_status(dev, 1));
|
2016-08-29 13:32:15 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static int asix_suspend(struct usb_interface *intf, pm_message_t message)
|
|
|
|
{
|
|
|
|
struct usbnet *dev = usb_get_intfdata(intf);
|
|
|
|
struct asix_common_private *priv = dev->driver_priv;
|
|
|
|
|
2017-11-06 12:26:46 +00:00
|
|
|
if (priv && priv->suspend)
|
2016-08-29 13:32:15 +00:00
|
|
|
priv->suspend(dev);
|
|
|
|
|
|
|
|
return usbnet_suspend(intf, message);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ax88772_resume(struct usbnet *dev)
|
|
|
|
{
|
2021-06-11 03:55:59 +00:00
|
|
|
struct asix_common_private *priv = dev->driver_priv;
|
2016-08-29 13:32:15 +00:00
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < 3; i++)
|
|
|
|
if (!ax88772_hw_reset(dev, 1))
|
|
|
|
break;
|
2021-06-11 03:55:59 +00:00
|
|
|
|
|
|
|
if (netif_running(dev->net))
|
|
|
|
phy_start(priv->phydev);
|
2016-08-29 13:32:15 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static void ax88772a_resume(struct usbnet *dev)
|
|
|
|
{
|
2021-06-11 03:55:59 +00:00
|
|
|
struct asix_common_private *priv = dev->driver_priv;
|
2016-08-29 13:32:15 +00:00
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < 3; i++) {
|
|
|
|
if (!ax88772a_hw_reset(dev, 1))
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
2021-06-11 03:55:59 +00:00
|
|
|
if (netif_running(dev->net))
|
|
|
|
phy_start(priv->phydev);
|
2016-08-29 13:32:15 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static int asix_resume(struct usb_interface *intf)
|
|
|
|
{
|
|
|
|
struct usbnet *dev = usb_get_intfdata(intf);
|
|
|
|
struct asix_common_private *priv = dev->driver_priv;
|
|
|
|
|
2017-11-06 12:26:46 +00:00
|
|
|
if (priv && priv->resume)
|
2016-08-29 13:32:15 +00:00
|
|
|
priv->resume(dev);
|
|
|
|
|
|
|
|
return usbnet_resume(intf);
|
|
|
|
}
|
|
|
|
|
2021-06-07 08:27:23 +00:00
|
|
|
static int ax88772_init_mdio(struct usbnet *dev)
|
|
|
|
{
|
|
|
|
struct asix_common_private *priv = dev->driver_priv;
|
|
|
|
|
|
|
|
priv->mdio = devm_mdiobus_alloc(&dev->udev->dev);
|
|
|
|
if (!priv->mdio)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
priv->mdio->priv = dev;
|
|
|
|
priv->mdio->read = &asix_mdio_bus_read;
|
|
|
|
priv->mdio->write = &asix_mdio_bus_write;
|
|
|
|
priv->mdio->name = "Asix MDIO Bus";
|
|
|
|
/* mii bus name is usb-<usb bus number>-<usb device number> */
|
|
|
|
snprintf(priv->mdio->id, MII_BUS_ID_SIZE, "usb-%03d:%03d",
|
|
|
|
dev->udev->bus->busnum, dev->udev->devnum);
|
|
|
|
|
|
|
|
return devm_mdiobus_register(&dev->udev->dev, priv->mdio);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ax88772_init_phy(struct usbnet *dev)
|
|
|
|
{
|
|
|
|
struct asix_common_private *priv = dev->driver_priv;
|
|
|
|
int ret;
|
|
|
|
|
2021-06-09 10:24:47 +00:00
|
|
|
ret = asix_read_phy_addr(dev, true);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
priv->phy_addr = ret;
|
2021-06-07 08:27:23 +00:00
|
|
|
|
|
|
|
snprintf(priv->phy_name, sizeof(priv->phy_name), PHY_ID_FMT,
|
|
|
|
priv->mdio->id, priv->phy_addr);
|
|
|
|
|
|
|
|
priv->phydev = phy_connect(dev->net, priv->phy_name, &asix_adjust_link,
|
|
|
|
PHY_INTERFACE_MODE_INTERNAL);
|
|
|
|
if (IS_ERR(priv->phydev)) {
|
|
|
|
netdev_err(dev->net, "Could not connect to PHY device %s\n",
|
|
|
|
priv->phy_name);
|
|
|
|
ret = PTR_ERR(priv->phydev);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2021-06-29 04:43:05 +00:00
|
|
|
phy_suspend(priv->phydev);
|
2021-06-11 03:55:59 +00:00
|
|
|
priv->phydev->mac_managed_pm = 1;
|
|
|
|
|
2021-06-07 08:27:23 +00:00
|
|
|
phy_attached_info(priv->phydev);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2011-10-04 09:55:16 +00:00
|
|
|
static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
|
|
|
|
{
|
2019-07-02 00:10:08 +00:00
|
|
|
u8 buf[ETH_ALEN] = {0}, chipcode = 0;
|
2016-08-29 13:32:15 +00:00
|
|
|
struct asix_common_private *priv;
|
2021-06-07 08:27:23 +00:00
|
|
|
int ret, i;
|
2011-10-04 09:55:16 +00:00
|
|
|
|
2018-07-03 15:06:49 +00:00
|
|
|
usbnet_get_endpoints(dev, intf);
|
2011-10-04 09:55:16 +00:00
|
|
|
|
2018-07-03 15:06:49 +00:00
|
|
|
/* Maybe the boot loader passed the MAC address via device tree */
|
|
|
|
if (!eth_platform_get_mac_address(&dev->udev->dev, buf)) {
|
|
|
|
netif_dbg(dev, ifup, dev->net,
|
|
|
|
"MAC address read from device tree");
|
2013-01-16 04:24:06 +00:00
|
|
|
} else {
|
2018-07-03 15:06:49 +00:00
|
|
|
/* Try getting the MAC address from EEPROM */
|
|
|
|
if (dev->driver_info->data & FLAG_EEPROM_MAC) {
|
|
|
|
for (i = 0; i < (ETH_ALEN >> 1); i++) {
|
|
|
|
ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM,
|
|
|
|
0x04 + i, 0, 2, buf + i * 2,
|
|
|
|
0);
|
|
|
|
if (ret < 0)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID,
|
|
|
|
0, 0, ETH_ALEN, buf, 0);
|
|
|
|
}
|
2013-01-16 04:24:06 +00:00
|
|
|
|
2018-07-03 15:06:49 +00:00
|
|
|
if (ret < 0) {
|
|
|
|
netdev_dbg(dev->net, "Failed to read MAC address: %d\n",
|
|
|
|
ret);
|
|
|
|
return ret;
|
|
|
|
}
|
2011-10-04 09:55:16 +00:00
|
|
|
}
|
2012-11-21 21:35:17 +00:00
|
|
|
|
|
|
|
asix_set_netdev_dev_addr(dev, buf);
|
2011-10-04 09:55:16 +00:00
|
|
|
|
|
|
|
dev->net->netdev_ops = &ax88772_netdev_ops;
|
|
|
|
dev->net->ethtool_ops = &ax88772_ethtool_ops;
|
2012-07-05 04:31:01 +00:00
|
|
|
dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */
|
|
|
|
dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */
|
2011-10-04 09:55:16 +00:00
|
|
|
|
2016-08-29 13:32:15 +00:00
|
|
|
asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &chipcode, 0);
|
|
|
|
chipcode &= AX_CHIPCODE_MASK;
|
2011-11-15 07:12:41 +00:00
|
|
|
|
2019-01-24 05:48:49 +00:00
|
|
|
ret = (chipcode == AX_AX88772_CHIPCODE) ? ax88772_hw_reset(dev, 0) :
|
|
|
|
ax88772a_hw_reset(dev, 0);
|
|
|
|
|
|
|
|
if (ret < 0) {
|
|
|
|
netdev_dbg(dev->net, "Failed to reset AX88772: %d\n", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
2011-11-15 07:12:41 +00:00
|
|
|
|
2005-08-31 16:53:10 +00:00
|
|
|
/* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
|
|
|
|
if (dev->driver_info->flags & FLAG_FRAMING_AX) {
|
|
|
|
/* hard_mtu is still the default - the device does not support
|
|
|
|
jumbo eth frames */
|
|
|
|
dev->rx_urb_size = 2048;
|
|
|
|
}
|
2011-10-04 09:55:18 +00:00
|
|
|
|
2021-06-07 08:27:20 +00:00
|
|
|
priv = devm_kzalloc(&dev->udev->dev, sizeof(*priv), GFP_KERNEL);
|
|
|
|
if (!priv)
|
2013-01-16 04:24:07 +00:00
|
|
|
return -ENOMEM;
|
|
|
|
|
2021-06-07 08:27:20 +00:00
|
|
|
dev->driver_priv = priv;
|
2016-08-29 13:32:15 +00:00
|
|
|
|
|
|
|
priv->presvd_phy_bmcr = 0;
|
|
|
|
priv->presvd_phy_advertise = 0;
|
|
|
|
if (chipcode == AX_AX88772_CHIPCODE) {
|
|
|
|
priv->resume = ax88772_resume;
|
|
|
|
priv->suspend = ax88772_suspend;
|
|
|
|
} else {
|
|
|
|
priv->resume = ax88772a_resume;
|
|
|
|
priv->suspend = ax88772_suspend;
|
|
|
|
}
|
|
|
|
|
2021-06-07 08:27:23 +00:00
|
|
|
ret = ax88772_init_mdio(dev);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
return ax88772_init_phy(dev);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ax88772_stop(struct usbnet *dev)
|
|
|
|
{
|
|
|
|
struct asix_common_private *priv = dev->driver_priv;
|
|
|
|
|
|
|
|
/* On unplugged USB, we will get MDIO communication errors and the
|
|
|
|
* PHY will be set in to PHY_HALTED state.
|
|
|
|
*/
|
|
|
|
if (priv->phydev->state != PHY_HALTED)
|
|
|
|
phy_stop(priv->phydev);
|
|
|
|
|
2005-08-31 16:53:10 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2013-01-18 15:36:56 +00:00
|
|
|
static void ax88772_unbind(struct usbnet *dev, struct usb_interface *intf)
|
2013-01-16 04:24:07 +00:00
|
|
|
{
|
2021-06-07 08:27:23 +00:00
|
|
|
struct asix_common_private *priv = dev->driver_priv;
|
|
|
|
|
|
|
|
phy_disconnect(priv->phydev);
|
2017-08-07 08:50:16 +00:00
|
|
|
asix_rx_fixup_common_free(dev->driver_priv);
|
2013-01-16 04:24:07 +00:00
|
|
|
}
|
|
|
|
|
2012-01-05 19:10:23 +00:00
|
|
|
static const struct ethtool_ops ax88178_ethtool_ops = {
|
2006-07-29 14:12:50 +00:00
|
|
|
.get_drvinfo = asix_get_drvinfo,
|
|
|
|
.get_link = asix_get_link,
|
|
|
|
.get_msglevel = usbnet_get_msglevel,
|
|
|
|
.set_msglevel = usbnet_set_msglevel,
|
|
|
|
.get_wol = asix_get_wol,
|
|
|
|
.set_wol = asix_set_wol,
|
|
|
|
.get_eeprom_len = asix_get_eeprom_len,
|
|
|
|
.get_eeprom = asix_get_eeprom,
|
2012-07-19 00:23:07 +00:00
|
|
|
.set_eeprom = asix_set_eeprom,
|
2006-10-08 22:08:01 +00:00
|
|
|
.nway_reset = usbnet_nway_reset,
|
2021-04-05 23:13:41 +00:00
|
|
|
.get_link_ksettings = usbnet_get_link_ksettings_mii,
|
|
|
|
.set_link_ksettings = usbnet_set_link_ksettings_mii,
|
2006-07-29 14:12:50 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
static int marvell_phy_init(struct usbnet *dev)
|
2005-08-31 16:53:10 +00:00
|
|
|
{
|
2006-07-29 14:12:50 +00:00
|
|
|
struct asix_data *data = (struct asix_data *)&dev->data;
|
|
|
|
u16 reg;
|
2005-08-31 16:53:10 +00:00
|
|
|
|
2010-02-17 10:30:23 +00:00
|
|
|
netdev_dbg(dev->net, "marvell_phy_init()\n");
|
2005-08-31 16:53:10 +00:00
|
|
|
|
2006-07-29 14:12:50 +00:00
|
|
|
reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_MARVELL_STATUS);
|
2010-02-17 10:30:23 +00:00
|
|
|
netdev_dbg(dev->net, "MII_MARVELL_STATUS = 0x%04x\n", reg);
|
2005-08-31 16:53:10 +00:00
|
|
|
|
2006-07-29 14:12:50 +00:00
|
|
|
asix_mdio_write(dev->net, dev->mii.phy_id, MII_MARVELL_CTRL,
|
|
|
|
MARVELL_CTRL_RXDELAY | MARVELL_CTRL_TXDELAY);
|
2005-08-31 16:53:10 +00:00
|
|
|
|
2006-07-29 14:12:50 +00:00
|
|
|
if (data->ledmode) {
|
|
|
|
reg = asix_mdio_read(dev->net, dev->mii.phy_id,
|
|
|
|
MII_MARVELL_LED_CTRL);
|
2010-02-17 10:30:23 +00:00
|
|
|
netdev_dbg(dev->net, "MII_MARVELL_LED_CTRL (1) = 0x%04x\n", reg);
|
2005-08-31 16:53:10 +00:00
|
|
|
|
2006-07-29 14:12:50 +00:00
|
|
|
reg &= 0xf8ff;
|
|
|
|
reg |= (1 + 0x0100);
|
|
|
|
asix_mdio_write(dev->net, dev->mii.phy_id,
|
|
|
|
MII_MARVELL_LED_CTRL, reg);
|
2005-08-31 16:53:10 +00:00
|
|
|
|
2006-07-29 14:12:50 +00:00
|
|
|
reg = asix_mdio_read(dev->net, dev->mii.phy_id,
|
|
|
|
MII_MARVELL_LED_CTRL);
|
2010-02-17 10:30:23 +00:00
|
|
|
netdev_dbg(dev->net, "MII_MARVELL_LED_CTRL (2) = 0x%04x\n", reg);
|
2006-07-29 14:12:50 +00:00
|
|
|
reg &= 0xfc0f;
|
|
|
|
}
|
2005-08-31 16:53:10 +00:00
|
|
|
|
2006-07-29 14:12:50 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2011-10-04 09:55:17 +00:00
|
|
|
static int rtl8211cl_phy_init(struct usbnet *dev)
|
|
|
|
{
|
|
|
|
struct asix_data *data = (struct asix_data *)&dev->data;
|
|
|
|
|
|
|
|
netdev_dbg(dev->net, "rtl8211cl_phy_init()\n");
|
|
|
|
|
|
|
|
asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0x0005);
|
|
|
|
asix_mdio_write (dev->net, dev->mii.phy_id, 0x0c, 0);
|
|
|
|
asix_mdio_write (dev->net, dev->mii.phy_id, 0x01,
|
|
|
|
asix_mdio_read (dev->net, dev->mii.phy_id, 0x01) | 0x0080);
|
|
|
|
asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0);
|
|
|
|
|
|
|
|
if (data->ledmode == 12) {
|
|
|
|
asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0x0002);
|
|
|
|
asix_mdio_write (dev->net, dev->mii.phy_id, 0x1a, 0x00cb);
|
|
|
|
asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2006-07-29 14:12:50 +00:00
|
|
|
static int marvell_led_status(struct usbnet *dev, u16 speed)
|
|
|
|
{
|
|
|
|
u16 reg = asix_mdio_read(dev->net, dev->mii.phy_id, MARVELL_LED_MANUAL);
|
|
|
|
|
2010-02-17 10:30:23 +00:00
|
|
|
netdev_dbg(dev->net, "marvell_led_status() read 0x%04x\n", reg);
|
2006-07-29 14:12:50 +00:00
|
|
|
|
|
|
|
/* Clear out the center LED bits - 0x03F0 */
|
|
|
|
reg &= 0xfc0f;
|
|
|
|
|
|
|
|
switch (speed) {
|
|
|
|
case SPEED_1000:
|
|
|
|
reg |= 0x03e0;
|
|
|
|
break;
|
|
|
|
case SPEED_100:
|
|
|
|
reg |= 0x03b0;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
reg |= 0x02f0;
|
2005-08-31 16:53:10 +00:00
|
|
|
}
|
|
|
|
|
2010-02-17 10:30:23 +00:00
|
|
|
netdev_dbg(dev->net, "marvell_led_status() writing 0x%04x\n", reg);
|
2006-07-29 14:12:50 +00:00
|
|
|
asix_mdio_write(dev->net, dev->mii.phy_id, MARVELL_LED_MANUAL, reg);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2011-10-04 09:55:17 +00:00
|
|
|
static int ax88178_reset(struct usbnet *dev)
|
|
|
|
{
|
|
|
|
struct asix_data *data = (struct asix_data *)&dev->data;
|
|
|
|
int ret;
|
|
|
|
__le16 eeprom;
|
|
|
|
u8 status;
|
|
|
|
int gpio0 = 0;
|
2011-11-15 07:12:42 +00:00
|
|
|
u32 phyid;
|
2011-10-04 09:55:17 +00:00
|
|
|
|
2016-08-29 13:32:15 +00:00
|
|
|
asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &status, 0);
|
2012-09-19 09:46:14 +00:00
|
|
|
netdev_dbg(dev->net, "GPIO Status: 0x%04x\n", status);
|
2011-10-04 09:55:17 +00:00
|
|
|
|
2016-08-29 13:32:15 +00:00
|
|
|
asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0, 0, 0, NULL, 0);
|
|
|
|
asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x0017, 0, 2, &eeprom, 0);
|
|
|
|
asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0, 0, 0, NULL, 0);
|
2011-10-04 09:55:17 +00:00
|
|
|
|
2012-09-19 09:46:14 +00:00
|
|
|
netdev_dbg(dev->net, "EEPROM index 0x17 is 0x%04x\n", eeprom);
|
2011-10-04 09:55:17 +00:00
|
|
|
|
|
|
|
if (eeprom == cpu_to_le16(0xffff)) {
|
|
|
|
data->phymode = PHY_MODE_MARVELL;
|
|
|
|
data->ledmode = 0;
|
|
|
|
gpio0 = 1;
|
|
|
|
} else {
|
2011-11-15 07:12:42 +00:00
|
|
|
data->phymode = le16_to_cpu(eeprom) & 0x7F;
|
2011-10-04 09:55:17 +00:00
|
|
|
data->ledmode = le16_to_cpu(eeprom) >> 8;
|
|
|
|
gpio0 = (le16_to_cpu(eeprom) & 0x80) ? 0 : 1;
|
|
|
|
}
|
2012-09-19 09:46:14 +00:00
|
|
|
netdev_dbg(dev->net, "GPIO0: %d, PhyMode: %d\n", gpio0, data->phymode);
|
2011-10-04 09:55:17 +00:00
|
|
|
|
2011-11-15 07:12:42 +00:00
|
|
|
/* Power up external GigaPHY through AX88178 GPIO pin */
|
2016-08-29 13:32:15 +00:00
|
|
|
asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_1 |
|
|
|
|
AX_GPIO_GPO1EN, 40, 0);
|
2011-10-04 09:55:17 +00:00
|
|
|
if ((le16_to_cpu(eeprom) >> 8) != 1) {
|
2016-08-29 13:32:15 +00:00
|
|
|
asix_write_gpio(dev, 0x003c, 30, 0);
|
|
|
|
asix_write_gpio(dev, 0x001c, 300, 0);
|
|
|
|
asix_write_gpio(dev, 0x003c, 30, 0);
|
2011-10-04 09:55:17 +00:00
|
|
|
} else {
|
2012-09-19 09:46:14 +00:00
|
|
|
netdev_dbg(dev->net, "gpio phymode == 1 path\n");
|
2016-08-29 13:32:15 +00:00
|
|
|
asix_write_gpio(dev, AX_GPIO_GPO1EN, 30, 0);
|
|
|
|
asix_write_gpio(dev, AX_GPIO_GPO1EN | AX_GPIO_GPO_1, 30, 0);
|
2011-10-04 09:55:17 +00:00
|
|
|
}
|
|
|
|
|
2011-11-15 07:12:42 +00:00
|
|
|
/* Read PHYID register *AFTER* powering up PHY */
|
|
|
|
phyid = asix_get_phyid(dev);
|
2012-09-19 09:46:14 +00:00
|
|
|
netdev_dbg(dev->net, "PHYID=0x%08x\n", phyid);
|
2011-11-15 07:12:42 +00:00
|
|
|
|
|
|
|
/* Set AX88178 to enable MII/GMII/RGMII interface for external PHY */
|
2016-08-29 13:32:15 +00:00
|
|
|
asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, 0, 0, 0, NULL, 0);
|
2011-11-15 07:12:42 +00:00
|
|
|
|
2016-08-29 13:32:15 +00:00
|
|
|
asix_sw_reset(dev, 0, 0);
|
2011-10-04 09:55:17 +00:00
|
|
|
msleep(150);
|
|
|
|
|
2016-08-29 13:32:15 +00:00
|
|
|
asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD, 0);
|
2011-10-04 09:55:17 +00:00
|
|
|
msleep(150);
|
|
|
|
|
2016-08-29 13:32:15 +00:00
|
|
|
asix_write_rx_ctl(dev, 0, 0);
|
2011-10-04 09:55:17 +00:00
|
|
|
|
|
|
|
if (data->phymode == PHY_MODE_MARVELL) {
|
|
|
|
marvell_phy_init(dev);
|
|
|
|
msleep(60);
|
|
|
|
} else if (data->phymode == PHY_MODE_RTL8211CL)
|
|
|
|
rtl8211cl_phy_init(dev);
|
|
|
|
|
2016-08-29 13:32:18 +00:00
|
|
|
asix_phy_reset(dev, BMCR_RESET | BMCR_ANENABLE);
|
2011-10-04 09:55:17 +00:00
|
|
|
asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
|
|
|
|
ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
|
|
|
|
asix_mdio_write(dev->net, dev->mii.phy_id, MII_CTRL1000,
|
|
|
|
ADVERTISE_1000FULL);
|
|
|
|
|
2016-08-29 13:32:19 +00:00
|
|
|
asix_write_medium_mode(dev, AX88178_MEDIUM_DEFAULT, 0);
|
2011-10-04 09:55:17 +00:00
|
|
|
mii_nway_restart(&dev->mii);
|
|
|
|
|
2012-01-10 06:40:23 +00:00
|
|
|
/* Rewrite MAC address */
|
|
|
|
memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
|
|
|
|
ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
|
2016-08-29 13:32:15 +00:00
|
|
|
data->mac_addr, 0);
|
2012-01-10 06:40:23 +00:00
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
2016-08-29 13:32:15 +00:00
|
|
|
ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, 0);
|
2011-10-04 09:55:18 +00:00
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
2011-10-04 09:55:17 +00:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2006-07-29 14:12:50 +00:00
|
|
|
static int ax88178_link_reset(struct usbnet *dev)
|
|
|
|
{
|
|
|
|
u16 mode;
|
2011-04-27 18:32:38 +00:00
|
|
|
struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
|
2006-07-29 14:12:50 +00:00
|
|
|
struct asix_data *data = (struct asix_data *)&dev->data;
|
2011-04-27 18:32:38 +00:00
|
|
|
u32 speed;
|
2006-07-29 14:12:50 +00:00
|
|
|
|
2010-02-17 10:30:23 +00:00
|
|
|
netdev_dbg(dev->net, "ax88178_link_reset()\n");
|
2006-07-29 14:12:50 +00:00
|
|
|
|
|
|
|
mii_check_media(&dev->mii, 1, 1);
|
|
|
|
mii_ethtool_gset(&dev->mii, &ecmd);
|
|
|
|
mode = AX88178_MEDIUM_DEFAULT;
|
2011-04-27 18:32:38 +00:00
|
|
|
speed = ethtool_cmd_speed(&ecmd);
|
2006-07-29 14:12:50 +00:00
|
|
|
|
2011-04-27 18:32:38 +00:00
|
|
|
if (speed == SPEED_1000)
|
2008-11-20 09:48:46 +00:00
|
|
|
mode |= AX_MEDIUM_GM;
|
2011-04-27 18:32:38 +00:00
|
|
|
else if (speed == SPEED_100)
|
2006-07-29 14:12:50 +00:00
|
|
|
mode |= AX_MEDIUM_PS;
|
|
|
|
else
|
|
|
|
mode &= ~(AX_MEDIUM_PS | AX_MEDIUM_GM);
|
|
|
|
|
2008-11-20 09:48:46 +00:00
|
|
|
mode |= AX_MEDIUM_ENCK;
|
|
|
|
|
2006-07-29 14:12:50 +00:00
|
|
|
if (ecmd.duplex == DUPLEX_FULL)
|
|
|
|
mode |= AX_MEDIUM_FD;
|
|
|
|
else
|
|
|
|
mode &= ~AX_MEDIUM_FD;
|
|
|
|
|
2011-04-27 18:32:38 +00:00
|
|
|
netdev_dbg(dev->net, "ax88178_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
|
|
|
|
speed, ecmd.duplex, mode);
|
2006-07-29 14:12:50 +00:00
|
|
|
|
2016-08-29 13:32:15 +00:00
|
|
|
asix_write_medium_mode(dev, mode, 0);
|
2006-07-29 14:12:50 +00:00
|
|
|
|
|
|
|
if (data->phymode == PHY_MODE_MARVELL && data->ledmode)
|
2011-04-27 18:32:38 +00:00
|
|
|
marvell_led_status(dev, speed);
|
2006-07-29 14:12:50 +00:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ax88178_set_mfb(struct usbnet *dev)
|
|
|
|
{
|
|
|
|
u16 mfb = AX_RX_CTL_MFB_16384;
|
|
|
|
u16 rxctl;
|
|
|
|
u16 medium;
|
|
|
|
int old_rx_urb_size = dev->rx_urb_size;
|
|
|
|
|
|
|
|
if (dev->hard_mtu < 2048) {
|
|
|
|
dev->rx_urb_size = 2048;
|
|
|
|
mfb = AX_RX_CTL_MFB_2048;
|
|
|
|
} else if (dev->hard_mtu < 4096) {
|
|
|
|
dev->rx_urb_size = 4096;
|
|
|
|
mfb = AX_RX_CTL_MFB_4096;
|
|
|
|
} else if (dev->hard_mtu < 8192) {
|
|
|
|
dev->rx_urb_size = 8192;
|
|
|
|
mfb = AX_RX_CTL_MFB_8192;
|
|
|
|
} else if (dev->hard_mtu < 16384) {
|
|
|
|
dev->rx_urb_size = 16384;
|
|
|
|
mfb = AX_RX_CTL_MFB_16384;
|
2005-08-31 16:53:10 +00:00
|
|
|
}
|
2006-07-29 14:12:50 +00:00
|
|
|
|
2016-08-29 13:32:15 +00:00
|
|
|
rxctl = asix_read_rx_ctl(dev, 0);
|
|
|
|
asix_write_rx_ctl(dev, (rxctl & ~AX_RX_CTL_MFB_16384) | mfb, 0);
|
2006-07-29 14:12:50 +00:00
|
|
|
|
2016-08-29 13:32:15 +00:00
|
|
|
medium = asix_read_medium_status(dev, 0);
|
2006-07-29 14:12:50 +00:00
|
|
|
if (dev->net->mtu > 1500)
|
|
|
|
medium |= AX_MEDIUM_JFE;
|
|
|
|
else
|
|
|
|
medium &= ~AX_MEDIUM_JFE;
|
2016-08-29 13:32:15 +00:00
|
|
|
asix_write_medium_mode(dev, medium, 0);
|
2006-07-29 14:12:50 +00:00
|
|
|
|
|
|
|
if (dev->rx_urb_size > old_rx_urb_size)
|
|
|
|
usbnet_unlink_rx_urbs(dev);
|
2005-08-31 16:53:10 +00:00
|
|
|
}
|
|
|
|
|
2006-07-29 14:12:50 +00:00
|
|
|
static int ax88178_change_mtu(struct net_device *net, int new_mtu)
|
2005-08-31 16:53:10 +00:00
|
|
|
{
|
2006-07-29 14:12:50 +00:00
|
|
|
struct usbnet *dev = netdev_priv(net);
|
|
|
|
int ll_mtu = new_mtu + net->hard_header_len + 4;
|
2005-08-31 16:53:10 +00:00
|
|
|
|
2010-02-17 10:30:23 +00:00
|
|
|
netdev_dbg(dev->net, "ax88178_change_mtu() new_mtu=%d\n", new_mtu);
|
2005-08-31 16:53:10 +00:00
|
|
|
|
2006-07-29 14:12:50 +00:00
|
|
|
if ((ll_mtu % dev->maxpacket) == 0)
|
|
|
|
return -EDOM;
|
|
|
|
|
|
|
|
net->mtu = new_mtu;
|
|
|
|
dev->hard_mtu = net->mtu + net->hard_header_len;
|
|
|
|
ax88178_set_mfb(dev);
|
|
|
|
|
USBNET: centralize computing of max rx/tx qlen
This patch centralizes computing of max rx/tx qlen, because:
- RX_QLEN()/TX_QLEN() is called in hot path
- computing depends on device's usb speed, now we have ls/fs, hs, ss,
so more checks need to be involved
- in fact, max rx/tx qlen should not only depend on device USB
speed, but also depend on ethernet link speed, so we need to
consider that in future.
- if SG support is done, max tx qlen may need change too
Generally, hard_mtu and rx_urb_size are changed in bind(), reset()
and link_reset() callback, and change mtu network operation, this
patches introduces the API of usbnet_update_max_qlen(), and calls
it in above path.
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-25 05:47:53 +00:00
|
|
|
/* max qlen depend on hard_mtu and rx_urb_size */
|
|
|
|
usbnet_update_max_qlen(dev);
|
|
|
|
|
2006-07-29 14:12:50 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2009-03-20 19:35:55 +00:00
|
|
|
static const struct net_device_ops ax88178_netdev_ops = {
|
|
|
|
.ndo_open = usbnet_open,
|
|
|
|
.ndo_stop = usbnet_stop,
|
|
|
|
.ndo_start_xmit = usbnet_start_xmit,
|
|
|
|
.ndo_tx_timeout = usbnet_tx_timeout,
|
2020-11-10 19:51:03 +00:00
|
|
|
.ndo_get_stats64 = dev_get_tstats64,
|
2010-03-09 12:24:38 +00:00
|
|
|
.ndo_set_mac_address = asix_set_mac_address,
|
2009-03-20 19:35:55 +00:00
|
|
|
.ndo_validate_addr = eth_validate_addr,
|
2011-08-16 06:29:01 +00:00
|
|
|
.ndo_set_rx_mode = asix_set_multicast,
|
2009-03-20 19:35:55 +00:00
|
|
|
.ndo_do_ioctl = asix_ioctl,
|
|
|
|
.ndo_change_mtu = ax88178_change_mtu,
|
|
|
|
};
|
|
|
|
|
2006-07-29 14:12:50 +00:00
|
|
|
static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf)
|
|
|
|
{
|
|
|
|
int ret;
|
2019-07-02 00:10:08 +00:00
|
|
|
u8 buf[ETH_ALEN] = {0};
|
2006-07-29 14:12:50 +00:00
|
|
|
|
|
|
|
usbnet_get_endpoints(dev,intf);
|
|
|
|
|
|
|
|
/* Get the MAC address */
|
2016-08-29 13:32:15 +00:00
|
|
|
ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf, 0);
|
2011-10-04 09:55:18 +00:00
|
|
|
if (ret < 0) {
|
2012-09-19 09:46:14 +00:00
|
|
|
netdev_dbg(dev->net, "Failed to read MAC address: %d\n", ret);
|
2011-10-04 09:55:18 +00:00
|
|
|
return ret;
|
2005-08-31 16:53:10 +00:00
|
|
|
}
|
2012-11-21 21:35:17 +00:00
|
|
|
|
|
|
|
asix_set_netdev_dev_addr(dev, buf);
|
2005-08-31 16:53:10 +00:00
|
|
|
|
2006-07-29 14:12:50 +00:00
|
|
|
/* Initialize MII structure */
|
|
|
|
dev->mii.dev = dev->net;
|
|
|
|
dev->mii.mdio_read = asix_mdio_read;
|
|
|
|
dev->mii.mdio_write = asix_mdio_write;
|
|
|
|
dev->mii.phy_id_mask = 0x1f;
|
|
|
|
dev->mii.reg_num_mask = 0xff;
|
|
|
|
dev->mii.supports_gmii = 1;
|
2021-06-07 08:27:21 +00:00
|
|
|
|
|
|
|
dev->mii.phy_id = asix_read_phy_addr(dev, true);
|
|
|
|
if (dev->mii.phy_id < 0)
|
|
|
|
return dev->mii.phy_id;
|
2009-03-20 19:35:55 +00:00
|
|
|
|
|
|
|
dev->net->netdev_ops = &ax88178_netdev_ops;
|
2006-07-29 14:12:50 +00:00
|
|
|
dev->net->ethtool_ops = &ax88178_ethtool_ops;
|
2016-10-20 17:55:17 +00:00
|
|
|
dev->net->max_mtu = 16384 - (dev->net->hard_header_len + 4);
|
2005-08-31 16:53:10 +00:00
|
|
|
|
2011-11-15 07:12:42 +00:00
|
|
|
/* Blink LEDS so users know driver saw dongle */
|
2016-08-29 13:32:15 +00:00
|
|
|
asix_sw_reset(dev, 0, 0);
|
2011-11-15 07:12:42 +00:00
|
|
|
msleep(150);
|
2005-08-31 16:53:10 +00:00
|
|
|
|
2016-08-29 13:32:15 +00:00
|
|
|
asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD, 0);
|
2011-11-15 07:12:42 +00:00
|
|
|
msleep(150);
|
2006-07-29 14:12:50 +00:00
|
|
|
|
|
|
|
/* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
|
|
|
|
if (dev->driver_info->flags & FLAG_FRAMING_AX) {
|
|
|
|
/* hard_mtu is still the default - the device does not support
|
|
|
|
jumbo eth frames */
|
|
|
|
dev->rx_urb_size = 2048;
|
|
|
|
}
|
|
|
|
|
2013-01-16 04:24:07 +00:00
|
|
|
dev->driver_priv = kzalloc(sizeof(struct asix_common_private), GFP_KERNEL);
|
|
|
|
if (!dev->driver_priv)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
2011-10-04 09:55:18 +00:00
|
|
|
return 0;
|
2005-08-31 16:53:10 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static const struct driver_info ax8817x_info = {
|
|
|
|
.description = "ASIX AX8817x USB 2.0 Ethernet",
|
2006-03-29 01:15:42 +00:00
|
|
|
.bind = ax88172_bind,
|
|
|
|
.status = asix_status,
|
2005-08-31 16:53:10 +00:00
|
|
|
.link_reset = ax88172_link_reset,
|
|
|
|
.reset = ax88172_link_reset,
|
2009-11-04 15:29:52 +00:00
|
|
|
.flags = FLAG_ETHER | FLAG_LINK_INTR,
|
2005-08-31 16:53:10 +00:00
|
|
|
.data = 0x00130103,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct driver_info dlink_dub_e100_info = {
|
|
|
|
.description = "DLink DUB-E100 USB Ethernet",
|
2006-03-29 01:15:42 +00:00
|
|
|
.bind = ax88172_bind,
|
|
|
|
.status = asix_status,
|
2005-08-31 16:53:10 +00:00
|
|
|
.link_reset = ax88172_link_reset,
|
|
|
|
.reset = ax88172_link_reset,
|
2009-11-04 15:29:52 +00:00
|
|
|
.flags = FLAG_ETHER | FLAG_LINK_INTR,
|
2005-08-31 16:53:10 +00:00
|
|
|
.data = 0x009f9d9f,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct driver_info netgear_fa120_info = {
|
|
|
|
.description = "Netgear FA-120 USB Ethernet",
|
2006-03-29 01:15:42 +00:00
|
|
|
.bind = ax88172_bind,
|
|
|
|
.status = asix_status,
|
2005-08-31 16:53:10 +00:00
|
|
|
.link_reset = ax88172_link_reset,
|
|
|
|
.reset = ax88172_link_reset,
|
2009-11-04 15:29:52 +00:00
|
|
|
.flags = FLAG_ETHER | FLAG_LINK_INTR,
|
2005-08-31 16:53:10 +00:00
|
|
|
.data = 0x00130103,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct driver_info hawking_uf200_info = {
|
|
|
|
.description = "Hawking UF200 USB Ethernet",
|
2006-03-29 01:15:42 +00:00
|
|
|
.bind = ax88172_bind,
|
|
|
|
.status = asix_status,
|
2005-08-31 16:53:10 +00:00
|
|
|
.link_reset = ax88172_link_reset,
|
|
|
|
.reset = ax88172_link_reset,
|
2009-11-04 15:29:52 +00:00
|
|
|
.flags = FLAG_ETHER | FLAG_LINK_INTR,
|
2005-08-31 16:53:10 +00:00
|
|
|
.data = 0x001f1d1f,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct driver_info ax88772_info = {
|
|
|
|
.description = "ASIX AX88772 USB 2.0 Ethernet",
|
|
|
|
.bind = ax88772_bind,
|
2013-01-16 04:24:07 +00:00
|
|
|
.unbind = ax88772_unbind,
|
2006-03-29 01:15:42 +00:00
|
|
|
.status = asix_status,
|
2016-08-29 13:32:15 +00:00
|
|
|
.reset = ax88772_reset,
|
2021-06-07 08:27:23 +00:00
|
|
|
.stop = ax88772_stop,
|
2012-03-14 20:18:32 +00:00
|
|
|
.flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR | FLAG_MULTI_PACKET,
|
2013-01-16 04:24:07 +00:00
|
|
|
.rx_fixup = asix_rx_fixup_common,
|
2006-07-29 14:12:50 +00:00
|
|
|
.tx_fixup = asix_tx_fixup,
|
|
|
|
};
|
|
|
|
|
2013-01-16 04:24:06 +00:00
|
|
|
static const struct driver_info ax88772b_info = {
|
|
|
|
.description = "ASIX AX88772B USB 2.0 Ethernet",
|
|
|
|
.bind = ax88772_bind,
|
2013-01-16 04:24:07 +00:00
|
|
|
.unbind = ax88772_unbind,
|
2013-01-16 04:24:06 +00:00
|
|
|
.status = asix_status,
|
|
|
|
.reset = ax88772_reset,
|
2021-07-22 07:32:24 +00:00
|
|
|
.stop = ax88772_stop,
|
2013-01-16 04:24:06 +00:00
|
|
|
.flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |
|
|
|
|
FLAG_MULTI_PACKET,
|
2013-01-16 04:24:07 +00:00
|
|
|
.rx_fixup = asix_rx_fixup_common,
|
2013-01-16 04:24:06 +00:00
|
|
|
.tx_fixup = asix_tx_fixup,
|
|
|
|
.data = FLAG_EEPROM_MAC,
|
|
|
|
};
|
|
|
|
|
2006-07-29 14:12:50 +00:00
|
|
|
static const struct driver_info ax88178_info = {
|
|
|
|
.description = "ASIX AX88178 USB 2.0 Ethernet",
|
|
|
|
.bind = ax88178_bind,
|
2013-01-16 04:24:07 +00:00
|
|
|
.unbind = ax88772_unbind,
|
2006-07-29 14:12:50 +00:00
|
|
|
.status = asix_status,
|
|
|
|
.link_reset = ax88178_link_reset,
|
2011-10-04 09:55:17 +00:00
|
|
|
.reset = ax88178_reset,
|
2014-02-13 18:30:39 +00:00
|
|
|
.flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |
|
|
|
|
FLAG_MULTI_PACKET,
|
2013-01-16 04:24:07 +00:00
|
|
|
.rx_fixup = asix_rx_fixup_common,
|
2006-07-29 14:12:50 +00:00
|
|
|
.tx_fixup = asix_tx_fixup,
|
2005-08-31 16:53:10 +00:00
|
|
|
};
|
|
|
|
|
2013-02-27 04:32:36 +00:00
|
|
|
/*
|
|
|
|
* USBLINK 20F9 "USB 2.0 LAN" USB ethernet adapter, typically found in
|
|
|
|
* no-name packaging.
|
|
|
|
* USB device strings are:
|
|
|
|
* 1: Manufacturer: USBLINK
|
|
|
|
* 2: Product: HG20F9 USB2.0
|
|
|
|
* 3: Serial: 000003
|
|
|
|
* Appears to be compatible with Asix 88772B.
|
|
|
|
*/
|
|
|
|
static const struct driver_info hg20f9_info = {
|
|
|
|
.description = "HG20F9 USB 2.0 Ethernet",
|
|
|
|
.bind = ax88772_bind,
|
|
|
|
.unbind = ax88772_unbind,
|
|
|
|
.status = asix_status,
|
|
|
|
.reset = ax88772_reset,
|
|
|
|
.flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |
|
|
|
|
FLAG_MULTI_PACKET,
|
|
|
|
.rx_fixup = asix_rx_fixup_common,
|
|
|
|
.tx_fixup = asix_tx_fixup,
|
|
|
|
.data = FLAG_EEPROM_MAC,
|
|
|
|
};
|
|
|
|
|
2005-08-31 16:53:10 +00:00
|
|
|
static const struct usb_device_id products [] = {
|
|
|
|
{
|
|
|
|
// Linksys USB200M
|
|
|
|
USB_DEVICE (0x077b, 0x2226),
|
|
|
|
.driver_info = (unsigned long) &ax8817x_info,
|
|
|
|
}, {
|
|
|
|
// Netgear FA120
|
|
|
|
USB_DEVICE (0x0846, 0x1040),
|
|
|
|
.driver_info = (unsigned long) &netgear_fa120_info,
|
|
|
|
}, {
|
|
|
|
// DLink DUB-E100
|
|
|
|
USB_DEVICE (0x2001, 0x1a00),
|
|
|
|
.driver_info = (unsigned long) &dlink_dub_e100_info,
|
|
|
|
}, {
|
|
|
|
// Intellinet, ST Lab USB Ethernet
|
|
|
|
USB_DEVICE (0x0b95, 0x1720),
|
|
|
|
.driver_info = (unsigned long) &ax8817x_info,
|
|
|
|
}, {
|
|
|
|
// Hawking UF200, TrendNet TU2-ET100
|
|
|
|
USB_DEVICE (0x07b8, 0x420a),
|
|
|
|
.driver_info = (unsigned long) &hawking_uf200_info,
|
|
|
|
}, {
|
2007-02-20 13:02:24 +00:00
|
|
|
// Billionton Systems, USB2AR
|
|
|
|
USB_DEVICE (0x08dd, 0x90ff),
|
|
|
|
.driver_info = (unsigned long) &ax8817x_info,
|
2015-10-15 18:00:21 +00:00
|
|
|
}, {
|
|
|
|
// Billionton Systems, GUSB2AM-1G-B
|
|
|
|
USB_DEVICE(0x08dd, 0x0114),
|
|
|
|
.driver_info = (unsigned long) &ax88178_info,
|
2005-08-31 16:53:10 +00:00
|
|
|
}, {
|
|
|
|
// ATEN UC210T
|
|
|
|
USB_DEVICE (0x0557, 0x2009),
|
|
|
|
.driver_info = (unsigned long) &ax8817x_info,
|
|
|
|
}, {
|
|
|
|
// Buffalo LUA-U2-KTX
|
|
|
|
USB_DEVICE (0x0411, 0x003d),
|
|
|
|
.driver_info = (unsigned long) &ax8817x_info,
|
2008-05-07 03:42:35 +00:00
|
|
|
}, {
|
|
|
|
// Buffalo LUA-U2-GT 10/100/1000
|
|
|
|
USB_DEVICE (0x0411, 0x006e),
|
|
|
|
.driver_info = (unsigned long) &ax88178_info,
|
2005-08-31 16:53:10 +00:00
|
|
|
}, {
|
|
|
|
// Sitecom LN-029 "USB 2.0 10/100 Ethernet adapter"
|
|
|
|
USB_DEVICE (0x6189, 0x182d),
|
|
|
|
.driver_info = (unsigned long) &ax8817x_info,
|
2012-03-08 22:44:03 +00:00
|
|
|
}, {
|
|
|
|
// Sitecom LN-031 "USB 2.0 10/100/1000 Ethernet adapter"
|
|
|
|
USB_DEVICE (0x0df6, 0x0056),
|
|
|
|
.driver_info = (unsigned long) &ax88178_info,
|
2015-02-25 23:58:12 +00:00
|
|
|
}, {
|
|
|
|
// Sitecom LN-028 "USB 2.0 10/100/1000 Ethernet adapter"
|
|
|
|
USB_DEVICE (0x0df6, 0x061c),
|
|
|
|
.driver_info = (unsigned long) &ax88178_info,
|
2005-08-31 16:53:10 +00:00
|
|
|
}, {
|
|
|
|
// corega FEther USB2-TX
|
|
|
|
USB_DEVICE (0x07aa, 0x0017),
|
|
|
|
.driver_info = (unsigned long) &ax8817x_info,
|
|
|
|
}, {
|
|
|
|
// Surecom EP-1427X-2
|
|
|
|
USB_DEVICE (0x1189, 0x0893),
|
|
|
|
.driver_info = (unsigned long) &ax8817x_info,
|
|
|
|
}, {
|
|
|
|
// goodway corp usb gwusb2e
|
|
|
|
USB_DEVICE (0x1631, 0x6200),
|
|
|
|
.driver_info = (unsigned long) &ax8817x_info,
|
2007-02-20 13:02:24 +00:00
|
|
|
}, {
|
|
|
|
// JVC MP-PRX1 Port Replicator
|
|
|
|
USB_DEVICE (0x04f1, 0x3008),
|
|
|
|
.driver_info = (unsigned long) &ax8817x_info,
|
2012-09-28 19:58:44 +00:00
|
|
|
}, {
|
|
|
|
// Lenovo U2L100P 10/100
|
|
|
|
USB_DEVICE (0x17ef, 0x7203),
|
2016-08-29 13:32:15 +00:00
|
|
|
.driver_info = (unsigned long)&ax88772b_info,
|
2011-07-20 05:57:04 +00:00
|
|
|
}, {
|
|
|
|
// ASIX AX88772B 10/100
|
|
|
|
USB_DEVICE (0x0b95, 0x772b),
|
2013-01-16 04:24:06 +00:00
|
|
|
.driver_info = (unsigned long) &ax88772b_info,
|
2005-08-31 16:53:10 +00:00
|
|
|
}, {
|
|
|
|
// ASIX AX88772 10/100
|
2007-02-20 13:02:24 +00:00
|
|
|
USB_DEVICE (0x0b95, 0x7720),
|
|
|
|
.driver_info = (unsigned long) &ax88772_info,
|
2006-05-18 08:13:17 +00:00
|
|
|
}, {
|
|
|
|
// ASIX AX88178 10/100/1000
|
|
|
|
USB_DEVICE (0x0b95, 0x1780),
|
2006-07-29 14:12:50 +00:00
|
|
|
.driver_info = (unsigned long) &ax88178_info,
|
2010-12-15 12:16:30 +00:00
|
|
|
}, {
|
|
|
|
// Logitec LAN-GTJ/U2A
|
|
|
|
USB_DEVICE (0x0789, 0x0160),
|
|
|
|
.driver_info = (unsigned long) &ax88178_info,
|
2005-12-19 18:58:38 +00:00
|
|
|
}, {
|
|
|
|
// Linksys USB200M Rev 2
|
|
|
|
USB_DEVICE (0x13b1, 0x0018),
|
|
|
|
.driver_info = (unsigned long) &ax88772_info,
|
2006-01-05 19:39:49 +00:00
|
|
|
}, {
|
|
|
|
// 0Q0 cable ethernet
|
|
|
|
USB_DEVICE (0x1557, 0x7720),
|
|
|
|
.driver_info = (unsigned long) &ax88772_info,
|
2006-07-29 14:12:50 +00:00
|
|
|
}, {
|
|
|
|
// DLink DUB-E100 H/W Ver B1
|
|
|
|
USB_DEVICE (0x07d1, 0x3c05),
|
|
|
|
.driver_info = (unsigned long) &ax88772_info,
|
2006-09-21 12:09:29 +00:00
|
|
|
}, {
|
|
|
|
// DLink DUB-E100 H/W Ver B1 Alternate
|
|
|
|
USB_DEVICE (0x2001, 0x3c05),
|
|
|
|
.driver_info = (unsigned long) &ax88772_info,
|
2012-09-17 21:50:57 +00:00
|
|
|
}, {
|
|
|
|
// DLink DUB-E100 H/W Ver C1
|
|
|
|
USB_DEVICE (0x2001, 0x1a02),
|
|
|
|
.driver_info = (unsigned long) &ax88772_info,
|
2006-07-29 14:12:50 +00:00
|
|
|
}, {
|
|
|
|
// Linksys USB1000
|
|
|
|
USB_DEVICE (0x1737, 0x0039),
|
|
|
|
.driver_info = (unsigned long) &ax88178_info,
|
2007-01-26 13:57:38 +00:00
|
|
|
}, {
|
|
|
|
// IO-DATA ETG-US2
|
|
|
|
USB_DEVICE (0x04bb, 0x0930),
|
|
|
|
.driver_info = (unsigned long) &ax88178_info,
|
2007-05-23 11:33:17 +00:00
|
|
|
}, {
|
|
|
|
// Belkin F5D5055
|
|
|
|
USB_DEVICE(0x050d, 0x5055),
|
|
|
|
.driver_info = (unsigned long) &ax88178_info,
|
2008-05-15 00:04:13 +00:00
|
|
|
}, {
|
|
|
|
// Apple USB Ethernet Adapter
|
|
|
|
USB_DEVICE(0x05ac, 0x1402),
|
|
|
|
.driver_info = (unsigned long) &ax88772_info,
|
2008-11-11 18:02:53 +00:00
|
|
|
}, {
|
|
|
|
// Cables-to-Go USB Ethernet Adapter
|
|
|
|
USB_DEVICE(0x0b95, 0x772a),
|
|
|
|
.driver_info = (unsigned long) &ax88772_info,
|
2009-02-25 07:52:24 +00:00
|
|
|
}, {
|
|
|
|
// ABOCOM for pci
|
|
|
|
USB_DEVICE(0x14ea, 0xab11),
|
|
|
|
.driver_info = (unsigned long) &ax88178_info,
|
|
|
|
}, {
|
|
|
|
// ASIX 88772a
|
|
|
|
USB_DEVICE(0x0db0, 0xa877),
|
|
|
|
.driver_info = (unsigned long) &ax88772_info,
|
2011-12-16 10:49:22 +00:00
|
|
|
}, {
|
|
|
|
// Asus USB Ethernet Adapter
|
|
|
|
USB_DEVICE (0x0b95, 0x7e2b),
|
2016-08-29 13:32:15 +00:00
|
|
|
.driver_info = (unsigned long)&ax88772b_info,
|
2012-07-13 05:26:31 +00:00
|
|
|
}, {
|
|
|
|
/* ASIX 88172a demo board */
|
|
|
|
USB_DEVICE(0x0b95, 0x172a),
|
|
|
|
.driver_info = (unsigned long) &ax88172a_info,
|
2013-02-27 04:32:36 +00:00
|
|
|
}, {
|
|
|
|
/*
|
|
|
|
* USBLINK HG20F9 "USB 2.0 LAN"
|
|
|
|
* Appears to have gazumped Linksys's manufacturer ID but
|
|
|
|
* doesn't (yet) conflict with any known Linksys product.
|
|
|
|
*/
|
|
|
|
USB_DEVICE(0x066b, 0x20f9),
|
|
|
|
.driver_info = (unsigned long) &hg20f9_info,
|
2005-08-31 16:53:10 +00:00
|
|
|
},
|
|
|
|
{ }, // END
|
|
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(usb, products);
|
|
|
|
|
|
|
|
static struct usb_driver asix_driver = {
|
2011-10-04 09:55:18 +00:00
|
|
|
.name = DRIVER_NAME,
|
2005-08-31 16:53:10 +00:00
|
|
|
.id_table = products,
|
|
|
|
.probe = usbnet_probe,
|
2016-08-29 13:32:15 +00:00
|
|
|
.suspend = asix_suspend,
|
|
|
|
.resume = asix_resume,
|
2017-01-03 09:22:20 +00:00
|
|
|
.reset_resume = asix_resume,
|
2005-08-31 16:53:10 +00:00
|
|
|
.disconnect = usbnet_disconnect,
|
2007-08-03 11:52:19 +00:00
|
|
|
.supports_autosuspend = 1,
|
2012-04-23 17:08:51 +00:00
|
|
|
.disable_hub_initiated_lpm = 1,
|
2005-08-31 16:53:10 +00:00
|
|
|
};
|
|
|
|
|
2011-11-18 17:44:20 +00:00
|
|
|
module_usb_driver(asix_driver);
|
2005-08-31 16:53:10 +00:00
|
|
|
|
|
|
|
MODULE_AUTHOR("David Hollis");
|
2011-10-04 09:55:16 +00:00
|
|
|
MODULE_VERSION(DRIVER_VERSION);
|
2005-08-31 16:53:10 +00:00
|
|
|
MODULE_DESCRIPTION("ASIX AX8817X based USB 2.0 Ethernet Devices");
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
|