linux-stable/net/mac80211/debugfs_key.c

347 lines
8.4 KiB
C
Raw Normal View History

/*
* Copyright 2003-2005 Devicescape Software, Inc.
* Copyright (c) 2006 Jiri Benc <jbenc@suse.cz>
* Copyright 2007 Johannes Berg <johannes@sipsolutions.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kobject.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
#include "ieee80211_i.h"
#include "key.h"
#include "debugfs.h"
#include "debugfs_key.h"
#define KEY_READ(name, prop, buflen, format_string) \
static ssize_t key_##name##_read(struct file *file, \
char __user *userbuf, \
size_t count, loff_t *ppos) \
{ \
char buf[buflen]; \
struct ieee80211_key *key = file->private_data; \
int res = scnprintf(buf, buflen, format_string, key->prop); \
return simple_read_from_buffer(userbuf, count, ppos, buf, res); \
}
#define KEY_READ_D(name) KEY_READ(name, name, 20, "%d\n")
[MAC80211]: rework key handling This moves all the key handling code out from ieee80211_ioctl.c into key.c and also does the following changes including documentation updates in mac80211.h: 1) Turn off hardware acceleration for keys when the interface is down. This is necessary because otherwise monitor interfaces could be decrypting frames for other interfaces that are down at the moment. Also, it should go some way towards better suspend/resume support, in any case the routines used here could be used for that as well. Additionally, this makes the driver interface nicer, keys for a specific local MAC address are only ever present while an interface with that MAC address is enabled. 2) Change driver set_key() callback interface to allow only return values of -ENOSPC, -EOPNOTSUPP and 0, warn on all other return values. This allows debugging the stack when a driver notices it's handed a key while it is down. 3) Invert the flag meaning to KEY_FLAG_UPLOADED_TO_HARDWARE. 4) Remove REMOVE_ALL_KEYS command as it isn't used nor do we want to use it, we'll use DISABLE_KEY for each key. It is hard to use REMOVE_ALL_KEYS because we can handle multiple virtual interfaces with different key configuration, so we'd have to keep track of a lot of state for this and that isn't worth it. 5) Warn when disabling a key fails, it musn't. 6) Remove IEEE80211_HW_NO_TKIP_WMM_HWACCEL in favour of per-key IEEE80211_KEY_FLAG_WMM_STA to let driver sort it out itself. 7) Tell driver that a (non-WEP) key is used only for transmission by using an all-zeroes station MAC address when configuring. 8) Change the set_key() callback to have access to the local MAC address the key is being added for. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-28 21:01:55 +00:00
#define KEY_READ_X(name) KEY_READ(name, name, 20, "0x%x\n")
#define KEY_OPS(name) \
static const struct file_operations key_ ##name## _ops = { \
.read = key_##name##_read, \
.open = mac80211_open_file_generic, \
}
#define KEY_FILE(name, format) \
KEY_READ_##format(name) \
KEY_OPS(name)
#define KEY_CONF_READ(name, buflen, format_string) \
KEY_READ(conf_##name, conf.name, buflen, format_string)
#define KEY_CONF_READ_D(name) KEY_CONF_READ(name, 20, "%d\n")
#define KEY_CONF_OPS(name) \
static const struct file_operations key_ ##name## _ops = { \
.read = key_conf_##name##_read, \
.open = mac80211_open_file_generic, \
}
#define KEY_CONF_FILE(name, format) \
KEY_CONF_READ_##format(name) \
KEY_CONF_OPS(name)
KEY_CONF_FILE(keylen, D);
KEY_CONF_FILE(keyidx, D);
KEY_CONF_FILE(hw_key_idx, D);
[MAC80211]: rework key handling This moves all the key handling code out from ieee80211_ioctl.c into key.c and also does the following changes including documentation updates in mac80211.h: 1) Turn off hardware acceleration for keys when the interface is down. This is necessary because otherwise monitor interfaces could be decrypting frames for other interfaces that are down at the moment. Also, it should go some way towards better suspend/resume support, in any case the routines used here could be used for that as well. Additionally, this makes the driver interface nicer, keys for a specific local MAC address are only ever present while an interface with that MAC address is enabled. 2) Change driver set_key() callback interface to allow only return values of -ENOSPC, -EOPNOTSUPP and 0, warn on all other return values. This allows debugging the stack when a driver notices it's handed a key while it is down. 3) Invert the flag meaning to KEY_FLAG_UPLOADED_TO_HARDWARE. 4) Remove REMOVE_ALL_KEYS command as it isn't used nor do we want to use it, we'll use DISABLE_KEY for each key. It is hard to use REMOVE_ALL_KEYS because we can handle multiple virtual interfaces with different key configuration, so we'd have to keep track of a lot of state for this and that isn't worth it. 5) Warn when disabling a key fails, it musn't. 6) Remove IEEE80211_HW_NO_TKIP_WMM_HWACCEL in favour of per-key IEEE80211_KEY_FLAG_WMM_STA to let driver sort it out itself. 7) Tell driver that a (non-WEP) key is used only for transmission by using an all-zeroes station MAC address when configuring. 8) Change the set_key() callback to have access to the local MAC address the key is being added for. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-28 21:01:55 +00:00
KEY_FILE(flags, X);
KEY_FILE(tx_rx_count, D);
KEY_READ(ifindex, sdata->name, IFNAMSIZ + 2, "%s\n");
KEY_OPS(ifindex);
static ssize_t key_algorithm_read(struct file *file,
char __user *userbuf,
size_t count, loff_t *ppos)
{
char *alg;
struct ieee80211_key *key = file->private_data;
switch (key->conf.alg) {
case ALG_WEP:
alg = "WEP\n";
break;
case ALG_TKIP:
alg = "TKIP\n";
break;
case ALG_CCMP:
alg = "CCMP\n";
break;
case ALG_AES_CMAC:
alg = "AES-128-CMAC\n";
break;
default:
return 0;
}
return simple_read_from_buffer(userbuf, count, ppos, alg, strlen(alg));
}
KEY_OPS(algorithm);
static ssize_t key_tx_spec_read(struct file *file, char __user *userbuf,
size_t count, loff_t *ppos)
{
const u8 *tpn;
char buf[20];
int len;
struct ieee80211_key *key = file->private_data;
switch (key->conf.alg) {
case ALG_WEP:
len = scnprintf(buf, sizeof(buf), "\n");
break;
case ALG_TKIP:
len = scnprintf(buf, sizeof(buf), "%08x %04x\n",
key->u.tkip.tx.iv32,
key->u.tkip.tx.iv16);
break;
case ALG_CCMP:
tpn = key->u.ccmp.tx_pn;
len = scnprintf(buf, sizeof(buf), "%02x%02x%02x%02x%02x%02x\n",
tpn[0], tpn[1], tpn[2], tpn[3], tpn[4], tpn[5]);
break;
case ALG_AES_CMAC:
tpn = key->u.aes_cmac.tx_pn;
len = scnprintf(buf, sizeof(buf), "%02x%02x%02x%02x%02x%02x\n",
tpn[0], tpn[1], tpn[2], tpn[3], tpn[4],
tpn[5]);
break;
default:
return 0;
}
return simple_read_from_buffer(userbuf, count, ppos, buf, len);
}
KEY_OPS(tx_spec);
static ssize_t key_rx_spec_read(struct file *file, char __user *userbuf,
size_t count, loff_t *ppos)
{
struct ieee80211_key *key = file->private_data;
char buf[14*NUM_RX_DATA_QUEUES+1], *p = buf;
int i, len;
const u8 *rpn;
switch (key->conf.alg) {
case ALG_WEP:
len = scnprintf(buf, sizeof(buf), "\n");
break;
case ALG_TKIP:
for (i = 0; i < NUM_RX_DATA_QUEUES; i++)
p += scnprintf(p, sizeof(buf)+buf-p,
"%08x %04x\n",
key->u.tkip.rx[i].iv32,
key->u.tkip.rx[i].iv16);
len = p - buf;
break;
case ALG_CCMP:
for (i = 0; i < NUM_RX_DATA_QUEUES + 1; i++) {
rpn = key->u.ccmp.rx_pn[i];
p += scnprintf(p, sizeof(buf)+buf-p,
"%02x%02x%02x%02x%02x%02x\n",
rpn[0], rpn[1], rpn[2],
rpn[3], rpn[4], rpn[5]);
}
len = p - buf;
break;
case ALG_AES_CMAC:
rpn = key->u.aes_cmac.rx_pn;
p += scnprintf(p, sizeof(buf)+buf-p,
"%02x%02x%02x%02x%02x%02x\n",
rpn[0], rpn[1], rpn[2],
rpn[3], rpn[4], rpn[5]);
len = p - buf;
break;
default:
return 0;
}
return simple_read_from_buffer(userbuf, count, ppos, buf, len);
}
KEY_OPS(rx_spec);
static ssize_t key_replays_read(struct file *file, char __user *userbuf,
size_t count, loff_t *ppos)
{
struct ieee80211_key *key = file->private_data;
char buf[20];
int len;
switch (key->conf.alg) {
case ALG_CCMP:
len = scnprintf(buf, sizeof(buf), "%u\n", key->u.ccmp.replays);
break;
case ALG_AES_CMAC:
len = scnprintf(buf, sizeof(buf), "%u\n",
key->u.aes_cmac.replays);
break;
default:
return 0;
}
return simple_read_from_buffer(userbuf, count, ppos, buf, len);
}
KEY_OPS(replays);
static ssize_t key_icverrors_read(struct file *file, char __user *userbuf,
size_t count, loff_t *ppos)
{
struct ieee80211_key *key = file->private_data;
char buf[20];
int len;
switch (key->conf.alg) {
case ALG_AES_CMAC:
len = scnprintf(buf, sizeof(buf), "%u\n",
key->u.aes_cmac.icverrors);
break;
default:
return 0;
}
return simple_read_from_buffer(userbuf, count, ppos, buf, len);
}
KEY_OPS(icverrors);
static ssize_t key_key_read(struct file *file, char __user *userbuf,
size_t count, loff_t *ppos)
{
struct ieee80211_key *key = file->private_data;
int i, res, bufsize = 2 * key->conf.keylen + 2;
char *buf = kmalloc(bufsize, GFP_KERNEL);
char *p = buf;
for (i = 0; i < key->conf.keylen; i++)
p += scnprintf(p, bufsize + buf - p, "%02x", key->conf.key[i]);
p += scnprintf(p, bufsize+buf-p, "\n");
res = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
kfree(buf);
return res;
}
KEY_OPS(key);
#define DEBUGFS_ADD(name) \
debugfs_create_file(#name, 0400, key->debugfs.dir, \
key, &key_##name##_ops);
void ieee80211_debugfs_key_add(struct ieee80211_key *key)
{
static int keycount;
char buf[50];
struct sta_info *sta;
if (!key->local->debugfs.keys)
return;
sprintf(buf, "%d", keycount);
key->debugfs.cnt = keycount;
keycount++;
key->debugfs.dir = debugfs_create_dir(buf,
key->local->debugfs.keys);
if (!key->debugfs.dir)
return;
rcu_read_lock();
sta = rcu_dereference(key->sta);
if (sta)
sprintf(buf, "../../stations/%pM", sta->sta.addr);
rcu_read_unlock();
/* using sta as a boolean is fine outside RCU lock */
if (sta)
key->debugfs.stalink =
debugfs_create_symlink("station", key->debugfs.dir, buf);
DEBUGFS_ADD(keylen);
DEBUGFS_ADD(flags);
DEBUGFS_ADD(keyidx);
DEBUGFS_ADD(hw_key_idx);
DEBUGFS_ADD(tx_rx_count);
DEBUGFS_ADD(algorithm);
DEBUGFS_ADD(tx_spec);
DEBUGFS_ADD(rx_spec);
DEBUGFS_ADD(replays);
DEBUGFS_ADD(icverrors);
DEBUGFS_ADD(key);
DEBUGFS_ADD(ifindex);
};
void ieee80211_debugfs_key_remove(struct ieee80211_key *key)
{
if (!key)
return;
debugfs_remove_recursive(key->debugfs.dir);
key->debugfs.dir = NULL;
}
void ieee80211_debugfs_key_add_default(struct ieee80211_sub_if_data *sdata)
{
char buf[50];
struct ieee80211_key *key;
if (!sdata->debugfs.dir)
return;
/* this is running under the key lock */
key = sdata->default_key;
if (key) {
sprintf(buf, "../keys/%d", key->debugfs.cnt);
sdata->debugfs.default_key =
debugfs_create_symlink("default_key",
sdata->debugfs.dir, buf);
} else
ieee80211_debugfs_key_remove_default(sdata);
}
void ieee80211_debugfs_key_remove_default(struct ieee80211_sub_if_data *sdata)
{
if (!sdata)
return;
debugfs_remove(sdata->debugfs.default_key);
sdata->debugfs.default_key = NULL;
}
void ieee80211_debugfs_key_add_mgmt_default(struct ieee80211_sub_if_data *sdata)
{
char buf[50];
struct ieee80211_key *key;
if (!sdata->debugfs.dir)
return;
/* this is running under the key lock */
key = sdata->default_mgmt_key;
if (key) {
sprintf(buf, "../keys/%d", key->debugfs.cnt);
sdata->debugfs.default_mgmt_key =
debugfs_create_symlink("default_mgmt_key",
sdata->debugfs.dir, buf);
} else
ieee80211_debugfs_key_remove_mgmt_default(sdata);
}
void ieee80211_debugfs_key_remove_mgmt_default(struct ieee80211_sub_if_data *sdata)
{
if (!sdata)
return;
debugfs_remove(sdata->debugfs.default_mgmt_key);
sdata->debugfs.default_mgmt_key = NULL;
}
void ieee80211_debugfs_key_sta_del(struct ieee80211_key *key,
struct sta_info *sta)
{
debugfs_remove(key->debugfs.stalink);
key->debugfs.stalink = NULL;
}