License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
2019-08-28 14:19:53 +00:00
|
|
|
#include <linux/pagewalk.h>
|
mm: per-thread vma caching
This patch is a continuation of efforts trying to optimize find_vma(),
avoiding potentially expensive rbtree walks to locate a vma upon faults.
The original approach (https://lkml.org/lkml/2013/11/1/410), where the
largest vma was also cached, ended up being too specific and random,
thus further comparison with other approaches were needed. There are
two things to consider when dealing with this, the cache hit rate and
the latency of find_vma(). Improving the hit-rate does not necessarily
translate in finding the vma any faster, as the overhead of any fancy
caching schemes can be too high to consider.
We currently cache the last used vma for the whole address space, which
provides a nice optimization, reducing the total cycles in find_vma() by
up to 250%, for workloads with good locality. On the other hand, this
simple scheme is pretty much useless for workloads with poor locality.
Analyzing ebizzy runs shows that, no matter how many threads are
running, the mmap_cache hit rate is less than 2%, and in many situations
below 1%.
The proposed approach is to replace this scheme with a small per-thread
cache, maximizing hit rates at a very low maintenance cost.
Invalidations are performed by simply bumping up a 32-bit sequence
number. The only expensive operation is in the rare case of a seq
number overflow, where all caches that share the same address space are
flushed. Upon a miss, the proposed replacement policy is based on the
page number that contains the virtual address in question. Concretely,
the following results are seen on an 80 core, 8 socket x86-64 box:
1) System bootup: Most programs are single threaded, so the per-thread
scheme does improve ~50% hit rate by just adding a few more slots to
the cache.
+----------------+----------+------------------+
| caching scheme | hit-rate | cycles (billion) |
+----------------+----------+------------------+
| baseline | 50.61% | 19.90 |
| patched | 73.45% | 13.58 |
+----------------+----------+------------------+
2) Kernel build: This one is already pretty good with the current
approach as we're dealing with good locality.
+----------------+----------+------------------+
| caching scheme | hit-rate | cycles (billion) |
+----------------+----------+------------------+
| baseline | 75.28% | 11.03 |
| patched | 88.09% | 9.31 |
+----------------+----------+------------------+
3) Oracle 11g Data Mining (4k pages): Similar to the kernel build workload.
+----------------+----------+------------------+
| caching scheme | hit-rate | cycles (billion) |
+----------------+----------+------------------+
| baseline | 70.66% | 17.14 |
| patched | 91.15% | 12.57 |
+----------------+----------+------------------+
4) Ebizzy: There's a fair amount of variation from run to run, but this
approach always shows nearly perfect hit rates, while baseline is just
about non-existent. The amounts of cycles can fluctuate between
anywhere from ~60 to ~116 for the baseline scheme, but this approach
reduces it considerably. For instance, with 80 threads:
+----------------+----------+------------------+
| caching scheme | hit-rate | cycles (billion) |
+----------------+----------+------------------+
| baseline | 1.06% | 91.54 |
| patched | 99.97% | 14.18 |
+----------------+----------+------------------+
[akpm@linux-foundation.org: fix nommu build, per Davidlohr]
[akpm@linux-foundation.org: document vmacache_valid() logic]
[akpm@linux-foundation.org: attempt to untangle header files]
[akpm@linux-foundation.org: add vmacache_find() BUG_ON]
[hughd@google.com: add vmacache_valid_mm() (from Oleg)]
[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: adjust and enhance comments]
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Michel Lespinasse <walken@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Tested-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 22:37:25 +00:00
|
|
|
#include <linux/vmacache.h>
|
2005-04-16 22:20:36 +00:00
|
|
|
#include <linux/hugetlb.h>
|
2011-03-22 23:33:00 +00:00
|
|
|
#include <linux/huge_mm.h>
|
2005-04-16 22:20:36 +00:00
|
|
|
#include <linux/mount.h>
|
|
|
|
#include <linux/seq_file.h>
|
2005-09-03 22:55:10 +00:00
|
|
|
#include <linux/highmem.h>
|
2007-05-08 07:26:04 +00:00
|
|
|
#include <linux/ptrace.h>
|
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
|
|
|
#include <linux/slab.h>
|
2005-09-03 22:54:45 +00:00
|
|
|
#include <linux/pagemap.h>
|
|
|
|
#include <linux/mempolicy.h>
|
2011-03-22 23:33:00 +00:00
|
|
|
#include <linux/rmap.h>
|
2008-02-05 06:29:04 +00:00
|
|
|
#include <linux/swap.h>
|
2017-02-08 17:51:29 +00:00
|
|
|
#include <linux/sched/mm.h>
|
2008-02-05 06:29:04 +00:00
|
|
|
#include <linux/swapops.h>
|
mm: soft-dirty bits for user memory changes tracking
The soft-dirty is a bit on a PTE which helps to track which pages a task
writes to. In order to do this tracking one should
1. Clear soft-dirty bits from PTEs ("echo 4 > /proc/PID/clear_refs)
2. Wait some time.
3. Read soft-dirty bits (55'th in /proc/PID/pagemap2 entries)
To do this tracking, the writable bit is cleared from PTEs when the
soft-dirty bit is. Thus, after this, when the task tries to modify a
page at some virtual address the #PF occurs and the kernel sets the
soft-dirty bit on the respective PTE.
Note, that although all the task's address space is marked as r/o after
the soft-dirty bits clear, the #PF-s that occur after that are processed
fast. This is so, since the pages are still mapped to physical memory,
and thus all the kernel does is finds this fact out and puts back
writable, dirty and soft-dirty bits on the PTE.
Another thing to note, is that when mremap moves PTEs they are marked
with soft-dirty as well, since from the user perspective mremap modifies
the virtual memory at mremap's new address.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 22:01:20 +00:00
|
|
|
#include <linux/mmu_notifier.h>
|
mm: introduce idle page tracking
Knowing the portion of memory that is not used by a certain application or
memory cgroup (idle memory) can be useful for partitioning the system
efficiently, e.g. by setting memory cgroup limits appropriately.
Currently, the only means to estimate the amount of idle memory provided
by the kernel is /proc/PID/{clear_refs,smaps}: the user can clear the
access bit for all pages mapped to a particular process by writing 1 to
clear_refs, wait for some time, and then count smaps:Referenced. However,
this method has two serious shortcomings:
- it does not count unmapped file pages
- it affects the reclaimer logic
To overcome these drawbacks, this patch introduces two new page flags,
Idle and Young, and a new sysfs file, /sys/kernel/mm/page_idle/bitmap.
A page's Idle flag can only be set from userspace by setting bit in
/sys/kernel/mm/page_idle/bitmap at the offset corresponding to the page,
and it is cleared whenever the page is accessed either through page tables
(it is cleared in page_referenced() in this case) or using the read(2)
system call (mark_page_accessed()). Thus by setting the Idle flag for
pages of a particular workload, which can be found e.g. by reading
/proc/PID/pagemap, waiting for some time to let the workload access its
working set, and then reading the bitmap file, one can estimate the amount
of pages that are not used by the workload.
The Young page flag is used to avoid interference with the memory
reclaimer. A page's Young flag is set whenever the Access bit of a page
table entry pointing to the page is cleared by writing to the bitmap file.
If page_referenced() is called on a Young page, it will add 1 to its
return value, therefore concealing the fact that the Access bit was
cleared.
Note, since there is no room for extra page flags on 32 bit, this feature
uses extended page flags when compiled on 32 bit.
[akpm@linux-foundation.org: fix build]
[akpm@linux-foundation.org: kpageidle requires an MMU]
[akpm@linux-foundation.org: decouple from page-flags rework]
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Reviewed-by: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Greg Thelen <gthelen@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-09 22:35:45 +00:00
|
|
|
#include <linux/page_idle.h>
|
mm, proc: reduce cost of /proc/pid/smaps for shmem mappings
The previous patch has improved swap accounting for shmem mapping, which
however made /proc/pid/smaps more expensive for shmem mappings, as we
consult the radix tree for each pte_none entry, so the overal complexity
is O(n*log(n)).
We can reduce this significantly for mappings that cannot contain COWed
pages, because then we can either use the statistics tha shmem object
itself tracks (if the mapping contains the whole object, or the swap
usage of the whole object is zero), or use the radix tree iterator,
which is much more effective than repeated find_get_entry() calls.
This patch therefore introduces a function shmem_swap_usage(vma) and
makes /proc/pid/smaps use it when possible. Only for writable private
mappings of shmem objects (i.e. tmpfs files) with the shmem object
itself (partially) swapped outwe have to resort to the find_get_entry()
approach.
Hopefully such mappings are relatively uncommon.
To demonstrate the diference, I have measured this on a process that
creates a 2GB mapping and dirties single pages with a stride of 2MB, and
time how long does it take to cat /proc/pid/smaps of this process 100
times.
Private writable mapping of a /dev/shm/file (the most complex case):
real 0m3.831s
user 0m0.180s
sys 0m3.212s
Shared mapping of an almost full mapping of a partially swapped /dev/shm/file
(which needs to employ the radix tree iterator).
real 0m1.351s
user 0m0.096s
sys 0m0.768s
Same, but with /dev/shm/file not swapped (so no radix tree walk needed)
real 0m0.935s
user 0m0.128s
sys 0m0.344s
Private anonymous mapping:
real 0m0.949s
user 0m0.116s
sys 0m0.348s
The cost is now much closer to the private anonymous mapping case, unless
the shmem mapping is private and writable.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14 23:19:20 +00:00
|
|
|
#include <linux/shmem_fs.h>
|
mm: fix KSM data corruption
Nadav reported KSM can corrupt the user data by the TLB batching
race[1]. That means data user written can be lost.
Quote from Nadav Amit:
"For this race we need 4 CPUs:
CPU0: Caches a writable and dirty PTE entry, and uses the stale value
for write later.
CPU1: Runs madvise_free on the range that includes the PTE. It would
clear the dirty-bit. It batches TLB flushes.
CPU2: Writes 4 to /proc/PID/clear_refs , clearing the PTEs soft-dirty.
We care about the fact that it clears the PTE write-bit, and of
course, batches TLB flushes.
CPU3: Runs KSM. Our purpose is to pass the following test in
write_protect_page():
if (pte_write(*pvmw.pte) || pte_dirty(*pvmw.pte) ||
(pte_protnone(*pvmw.pte) && pte_savedwrite(*pvmw.pte)))
Since it will avoid TLB flush. And we want to do it while the PTE is
stale. Later, and before replacing the page, we would be able to
change the page.
Note that all the operations the CPU1-3 perform canhappen in parallel
since they only acquire mmap_sem for read.
We start with two identical pages. Everything below regards the same
page/PTE.
CPU0 CPU1 CPU2 CPU3
---- ---- ---- ----
Write the same
value on page
[cache PTE as
dirty in TLB]
MADV_FREE
pte_mkclean()
4 > clear_refs
pte_wrprotect()
write_protect_page()
[ success, no flush ]
pages_indentical()
[ ok ]
Write to page
different value
[Ok, using stale
PTE]
replace_page()
Later, CPU1, CPU2 and CPU3 would flush the TLB, but that is too late.
CPU0 already wrote on the page, but KSM ignored this write, and it got
lost"
In above scenario, MADV_FREE is fixed by changing TLB batching API
including [set|clear]_tlb_flush_pending. Remained thing is soft-dirty
part.
This patch changes soft-dirty uses TLB batching API instead of
flush_tlb_mm and KSM checks pending TLB flush by using
mm_tlb_flush_pending so that it will flush TLB to avoid data lost if
there are other parallel threads pending TLB flush.
[1] http://lkml.kernel.org/r/BD3A0EBE-ECF4-41D4-87FA-C755EA9AB6BD@gmail.com
Link: http://lkml.kernel.org/r/20170802000818.4760-8-namit@vmware.com
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Nadav Amit <namit@vmware.com>
Reported-by: Nadav Amit <namit@vmware.com>
Tested-by: Nadav Amit <namit@vmware.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-10 22:24:15 +00:00
|
|
|
#include <linux/uaccess.h>
|
2018-04-13 13:55:07 +00:00
|
|
|
#include <linux/pkeys.h>
|
2005-09-03 22:55:10 +00:00
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
#include <asm/elf.h>
|
mm: fix KSM data corruption
Nadav reported KSM can corrupt the user data by the TLB batching
race[1]. That means data user written can be lost.
Quote from Nadav Amit:
"For this race we need 4 CPUs:
CPU0: Caches a writable and dirty PTE entry, and uses the stale value
for write later.
CPU1: Runs madvise_free on the range that includes the PTE. It would
clear the dirty-bit. It batches TLB flushes.
CPU2: Writes 4 to /proc/PID/clear_refs , clearing the PTEs soft-dirty.
We care about the fact that it clears the PTE write-bit, and of
course, batches TLB flushes.
CPU3: Runs KSM. Our purpose is to pass the following test in
write_protect_page():
if (pte_write(*pvmw.pte) || pte_dirty(*pvmw.pte) ||
(pte_protnone(*pvmw.pte) && pte_savedwrite(*pvmw.pte)))
Since it will avoid TLB flush. And we want to do it while the PTE is
stale. Later, and before replacing the page, we would be able to
change the page.
Note that all the operations the CPU1-3 perform canhappen in parallel
since they only acquire mmap_sem for read.
We start with two identical pages. Everything below regards the same
page/PTE.
CPU0 CPU1 CPU2 CPU3
---- ---- ---- ----
Write the same
value on page
[cache PTE as
dirty in TLB]
MADV_FREE
pte_mkclean()
4 > clear_refs
pte_wrprotect()
write_protect_page()
[ success, no flush ]
pages_indentical()
[ ok ]
Write to page
different value
[Ok, using stale
PTE]
replace_page()
Later, CPU1, CPU2 and CPU3 would flush the TLB, but that is too late.
CPU0 already wrote on the page, but KSM ignored this write, and it got
lost"
In above scenario, MADV_FREE is fixed by changing TLB batching API
including [set|clear]_tlb_flush_pending. Remained thing is soft-dirty
part.
This patch changes soft-dirty uses TLB batching API instead of
flush_tlb_mm and KSM checks pending TLB flush by using
mm_tlb_flush_pending so that it will flush TLB to avoid data lost if
there are other parallel threads pending TLB flush.
[1] http://lkml.kernel.org/r/BD3A0EBE-ECF4-41D4-87FA-C755EA9AB6BD@gmail.com
Link: http://lkml.kernel.org/r/20170802000818.4760-8-namit@vmware.com
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Nadav Amit <namit@vmware.com>
Reported-by: Nadav Amit <namit@vmware.com>
Tested-by: Nadav Amit <namit@vmware.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-10 22:24:15 +00:00
|
|
|
#include <asm/tlb.h>
|
2005-09-03 22:55:10 +00:00
|
|
|
#include <asm/tlbflush.h>
|
2005-04-16 22:20:36 +00:00
|
|
|
#include "internal.h"
|
|
|
|
|
2018-04-10 23:31:16 +00:00
|
|
|
#define SEQ_PUT_DEC(str, val) \
|
|
|
|
seq_put_decimal_ull_width(m, str, (val) << (PAGE_SHIFT-10), 8)
|
2008-02-08 12:18:33 +00:00
|
|
|
void task_mem(struct seq_file *m, struct mm_struct *mm)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2017-11-16 01:35:40 +00:00
|
|
|
unsigned long text, lib, swap, anon, file, shmem;
|
[PATCH] mm: update_hiwaters just in time
update_mem_hiwater has attracted various criticisms, in particular from those
concerned with mm scalability. Originally it was called whenever rss or
total_vm got raised. Then many of those callsites were replaced by a timer
tick call from account_system_time. Now Frank van Maarseveen reports that to
be found inadequate. How about this? Works for Frank.
Replace update_mem_hiwater, a poor combination of two unrelated ops, by macros
update_hiwater_rss and update_hiwater_vm. Don't attempt to keep
mm->hiwater_rss up to date at timer tick, nor every time we raise rss (usually
by 1): those are hot paths. Do the opposite, update only when about to lower
rss (usually by many), or just before final accounting in do_exit. Handle
mm->hiwater_vm in the same way, though it's much less of an issue. Demand
that whoever collects these hiwater statistics do the work of taking the
maximum with rss or total_vm.
And there has been no collector of these hiwater statistics in the tree. The
new convention needs an example, so match Frank's usage by adding a VmPeak
line above VmSize to /proc/<pid>/status, and also a VmHWM line above VmRSS
(High-Water-Mark or High-Water-Memory).
There was a particular anomaly during mremap move, that hiwater_vm might be
captured too high. A fleeting such anomaly remains, but it's quickly
corrected now, whereas before it would stick.
What locking? None: if the app is racy then these statistics will be racy,
it's not worth any overhead to make them exact. But whenever it suits,
hiwater_vm is updated under exclusive mmap_sem, and hiwater_rss under
page_table_lock (for now) or with preemption disabled (later on): without
going to any trouble, minimize the time between reading current values and
updating, to minimize those occasions when a racing thread bumps a count up
and back down in between.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 01:16:18 +00:00
|
|
|
unsigned long hiwater_vm, total_vm, hiwater_rss, total_rss;
|
|
|
|
|
mm, procfs: breakdown RSS for anon, shmem and file in /proc/pid/status
There are several shortcomings with the accounting of shared memory
(SysV shm, shared anonymous mapping, mapping of a tmpfs file). The
values in /proc/<pid>/status and <...>/statm don't allow to distinguish
between shmem memory and a shared mapping to a regular file, even though
theirs implication on memory usage are quite different: during reclaim,
file mapping can be dropped or written back on disk, while shmem needs a
place in swap.
Also, to distinguish the memory occupied by anonymous and file mappings,
one has to read the /proc/pid/statm file, which has a field for the file
mappings (again, including shmem) and total memory occupied by these
mappings (i.e. equivalent to VmRSS in the <...>/status file. Getting
the value for anonymous mappings only is thus not exactly user-friendly
(the statm file is intended to be rather efficiently machine-readable).
To address both of these shortcomings, this patch adds a breakdown of
VmRSS in /proc/<pid>/status via new fields RssAnon, RssFile and
RssShmem, making use of the previous preparatory patch. These fields
tell the user the memory occupied by private anonymous pages, mapped
regular files and shmem, respectively. Other existing fields in /status
and /statm files are left without change. The /statm file can be
extended in the future, if there's a need for that.
Example (part of) /proc/pid/status output including the new Rss* fields:
VmPeak: 2001008 kB
VmSize: 2001004 kB
VmLck: 0 kB
VmPin: 0 kB
VmHWM: 5108 kB
VmRSS: 5108 kB
RssAnon: 92 kB
RssFile: 1324 kB
RssShmem: 3692 kB
VmData: 192 kB
VmStk: 136 kB
VmExe: 4 kB
VmLib: 1784 kB
VmPTE: 3928 kB
VmPMD: 20 kB
VmSwap: 0 kB
HugetlbPages: 0 kB
[vbabka@suse.cz: forward-porting, tweak changelog]
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14 23:19:29 +00:00
|
|
|
anon = get_mm_counter(mm, MM_ANONPAGES);
|
|
|
|
file = get_mm_counter(mm, MM_FILEPAGES);
|
|
|
|
shmem = get_mm_counter(mm, MM_SHMEMPAGES);
|
|
|
|
|
[PATCH] mm: update_hiwaters just in time
update_mem_hiwater has attracted various criticisms, in particular from those
concerned with mm scalability. Originally it was called whenever rss or
total_vm got raised. Then many of those callsites were replaced by a timer
tick call from account_system_time. Now Frank van Maarseveen reports that to
be found inadequate. How about this? Works for Frank.
Replace update_mem_hiwater, a poor combination of two unrelated ops, by macros
update_hiwater_rss and update_hiwater_vm. Don't attempt to keep
mm->hiwater_rss up to date at timer tick, nor every time we raise rss (usually
by 1): those are hot paths. Do the opposite, update only when about to lower
rss (usually by many), or just before final accounting in do_exit. Handle
mm->hiwater_vm in the same way, though it's much less of an issue. Demand
that whoever collects these hiwater statistics do the work of taking the
maximum with rss or total_vm.
And there has been no collector of these hiwater statistics in the tree. The
new convention needs an example, so match Frank's usage by adding a VmPeak
line above VmSize to /proc/<pid>/status, and also a VmHWM line above VmRSS
(High-Water-Mark or High-Water-Memory).
There was a particular anomaly during mremap move, that hiwater_vm might be
captured too high. A fleeting such anomaly remains, but it's quickly
corrected now, whereas before it would stick.
What locking? None: if the app is racy then these statistics will be racy,
it's not worth any overhead to make them exact. But whenever it suits,
hiwater_vm is updated under exclusive mmap_sem, and hiwater_rss under
page_table_lock (for now) or with preemption disabled (later on): without
going to any trouble, minimize the time between reading current values and
updating, to minimize those occasions when a racing thread bumps a count up
and back down in between.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 01:16:18 +00:00
|
|
|
/*
|
|
|
|
* Note: to minimize their overhead, mm maintains hiwater_vm and
|
|
|
|
* hiwater_rss only when about to *lower* total_vm or rss. Any
|
|
|
|
* collector of these hiwater stats must therefore get total_vm
|
|
|
|
* and rss too, which will usually be the higher. Barriers? not
|
|
|
|
* worth the effort, such snapshots can always be inconsistent.
|
|
|
|
*/
|
|
|
|
hiwater_vm = total_vm = mm->total_vm;
|
|
|
|
if (hiwater_vm < mm->hiwater_vm)
|
|
|
|
hiwater_vm = mm->hiwater_vm;
|
mm, procfs: breakdown RSS for anon, shmem and file in /proc/pid/status
There are several shortcomings with the accounting of shared memory
(SysV shm, shared anonymous mapping, mapping of a tmpfs file). The
values in /proc/<pid>/status and <...>/statm don't allow to distinguish
between shmem memory and a shared mapping to a regular file, even though
theirs implication on memory usage are quite different: during reclaim,
file mapping can be dropped or written back on disk, while shmem needs a
place in swap.
Also, to distinguish the memory occupied by anonymous and file mappings,
one has to read the /proc/pid/statm file, which has a field for the file
mappings (again, including shmem) and total memory occupied by these
mappings (i.e. equivalent to VmRSS in the <...>/status file. Getting
the value for anonymous mappings only is thus not exactly user-friendly
(the statm file is intended to be rather efficiently machine-readable).
To address both of these shortcomings, this patch adds a breakdown of
VmRSS in /proc/<pid>/status via new fields RssAnon, RssFile and
RssShmem, making use of the previous preparatory patch. These fields
tell the user the memory occupied by private anonymous pages, mapped
regular files and shmem, respectively. Other existing fields in /status
and /statm files are left without change. The /statm file can be
extended in the future, if there's a need for that.
Example (part of) /proc/pid/status output including the new Rss* fields:
VmPeak: 2001008 kB
VmSize: 2001004 kB
VmLck: 0 kB
VmPin: 0 kB
VmHWM: 5108 kB
VmRSS: 5108 kB
RssAnon: 92 kB
RssFile: 1324 kB
RssShmem: 3692 kB
VmData: 192 kB
VmStk: 136 kB
VmExe: 4 kB
VmLib: 1784 kB
VmPTE: 3928 kB
VmPMD: 20 kB
VmSwap: 0 kB
HugetlbPages: 0 kB
[vbabka@suse.cz: forward-porting, tweak changelog]
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14 23:19:29 +00:00
|
|
|
hiwater_rss = total_rss = anon + file + shmem;
|
[PATCH] mm: update_hiwaters just in time
update_mem_hiwater has attracted various criticisms, in particular from those
concerned with mm scalability. Originally it was called whenever rss or
total_vm got raised. Then many of those callsites were replaced by a timer
tick call from account_system_time. Now Frank van Maarseveen reports that to
be found inadequate. How about this? Works for Frank.
Replace update_mem_hiwater, a poor combination of two unrelated ops, by macros
update_hiwater_rss and update_hiwater_vm. Don't attempt to keep
mm->hiwater_rss up to date at timer tick, nor every time we raise rss (usually
by 1): those are hot paths. Do the opposite, update only when about to lower
rss (usually by many), or just before final accounting in do_exit. Handle
mm->hiwater_vm in the same way, though it's much less of an issue. Demand
that whoever collects these hiwater statistics do the work of taking the
maximum with rss or total_vm.
And there has been no collector of these hiwater statistics in the tree. The
new convention needs an example, so match Frank's usage by adding a VmPeak
line above VmSize to /proc/<pid>/status, and also a VmHWM line above VmRSS
(High-Water-Mark or High-Water-Memory).
There was a particular anomaly during mremap move, that hiwater_vm might be
captured too high. A fleeting such anomaly remains, but it's quickly
corrected now, whereas before it would stick.
What locking? None: if the app is racy then these statistics will be racy,
it's not worth any overhead to make them exact. But whenever it suits,
hiwater_vm is updated under exclusive mmap_sem, and hiwater_rss under
page_table_lock (for now) or with preemption disabled (later on): without
going to any trouble, minimize the time between reading current values and
updating, to minimize those occasions when a racing thread bumps a count up
and back down in between.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 01:16:18 +00:00
|
|
|
if (hiwater_rss < mm->hiwater_rss)
|
|
|
|
hiwater_rss = mm->hiwater_rss;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2018-02-01 00:17:22 +00:00
|
|
|
/* split executable areas between text and lib */
|
|
|
|
text = PAGE_ALIGN(mm->end_code) - (mm->start_code & PAGE_MASK);
|
|
|
|
text = min(text, mm->exec_vm << PAGE_SHIFT);
|
|
|
|
lib = (mm->exec_vm << PAGE_SHIFT) - text;
|
|
|
|
|
2010-03-05 21:41:42 +00:00
|
|
|
swap = get_mm_counter(mm, MM_SWAPENTS);
|
2018-04-10 23:31:16 +00:00
|
|
|
SEQ_PUT_DEC("VmPeak:\t", hiwater_vm);
|
|
|
|
SEQ_PUT_DEC(" kB\nVmSize:\t", total_vm);
|
|
|
|
SEQ_PUT_DEC(" kB\nVmLck:\t", mm->locked_vm);
|
2019-02-06 17:59:15 +00:00
|
|
|
SEQ_PUT_DEC(" kB\nVmPin:\t", atomic64_read(&mm->pinned_vm));
|
2018-04-10 23:31:16 +00:00
|
|
|
SEQ_PUT_DEC(" kB\nVmHWM:\t", hiwater_rss);
|
|
|
|
SEQ_PUT_DEC(" kB\nVmRSS:\t", total_rss);
|
|
|
|
SEQ_PUT_DEC(" kB\nRssAnon:\t", anon);
|
|
|
|
SEQ_PUT_DEC(" kB\nRssFile:\t", file);
|
|
|
|
SEQ_PUT_DEC(" kB\nRssShmem:\t", shmem);
|
|
|
|
SEQ_PUT_DEC(" kB\nVmData:\t", mm->data_vm);
|
|
|
|
SEQ_PUT_DEC(" kB\nVmStk:\t", mm->stack_vm);
|
|
|
|
seq_put_decimal_ull_width(m,
|
|
|
|
" kB\nVmExe:\t", text >> 10, 8);
|
|
|
|
seq_put_decimal_ull_width(m,
|
|
|
|
" kB\nVmLib:\t", lib >> 10, 8);
|
|
|
|
seq_put_decimal_ull_width(m,
|
|
|
|
" kB\nVmPTE:\t", mm_pgtables_bytes(mm) >> 10, 8);
|
|
|
|
SEQ_PUT_DEC(" kB\nVmSwap:\t", swap);
|
|
|
|
seq_puts(m, " kB\n");
|
2015-11-06 02:47:14 +00:00
|
|
|
hugetlb_report_usage(m, mm);
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
2018-04-10 23:31:16 +00:00
|
|
|
#undef SEQ_PUT_DEC
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
unsigned long task_vsize(struct mm_struct *mm)
|
|
|
|
{
|
|
|
|
return PAGE_SIZE * mm->total_vm;
|
|
|
|
}
|
|
|
|
|
2011-01-13 01:00:32 +00:00
|
|
|
unsigned long task_statm(struct mm_struct *mm,
|
|
|
|
unsigned long *shared, unsigned long *text,
|
|
|
|
unsigned long *data, unsigned long *resident)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2016-01-14 23:19:26 +00:00
|
|
|
*shared = get_mm_counter(mm, MM_FILEPAGES) +
|
|
|
|
get_mm_counter(mm, MM_SHMEMPAGES);
|
2005-04-16 22:20:36 +00:00
|
|
|
*text = (PAGE_ALIGN(mm->end_code) - (mm->start_code & PAGE_MASK))
|
|
|
|
>> PAGE_SHIFT;
|
2016-01-14 23:22:07 +00:00
|
|
|
*data = mm->data_vm + mm->stack_vm;
|
2010-03-05 21:41:39 +00:00
|
|
|
*resident = *shared + get_mm_counter(mm, MM_ANONPAGES);
|
2005-04-16 22:20:36 +00:00
|
|
|
return mm->total_vm;
|
|
|
|
}
|
|
|
|
|
2012-10-19 08:00:55 +00:00
|
|
|
#ifdef CONFIG_NUMA
|
|
|
|
/*
|
2014-10-09 22:27:52 +00:00
|
|
|
* Save get_task_policy() for show_numa_map().
|
2012-10-19 08:00:55 +00:00
|
|
|
*/
|
|
|
|
static void hold_task_mempolicy(struct proc_maps_private *priv)
|
|
|
|
{
|
|
|
|
struct task_struct *task = priv->task;
|
|
|
|
|
|
|
|
task_lock(task);
|
2014-10-09 22:27:52 +00:00
|
|
|
priv->task_mempolicy = get_task_policy(task);
|
2012-10-19 08:00:55 +00:00
|
|
|
mpol_get(priv->task_mempolicy);
|
|
|
|
task_unlock(task);
|
|
|
|
}
|
|
|
|
static void release_task_mempolicy(struct proc_maps_private *priv)
|
|
|
|
{
|
|
|
|
mpol_put(priv->task_mempolicy);
|
|
|
|
}
|
|
|
|
#else
|
|
|
|
static void hold_task_mempolicy(struct proc_maps_private *priv)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
static void release_task_mempolicy(struct proc_maps_private *priv)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2014-10-09 22:25:36 +00:00
|
|
|
static void *m_start(struct seq_file *m, loff_t *ppos)
|
2005-09-03 22:55:10 +00:00
|
|
|
{
|
2008-02-05 06:29:03 +00:00
|
|
|
struct proc_maps_private *priv = m->private;
|
2020-04-07 03:09:14 +00:00
|
|
|
unsigned long last_addr = *ppos;
|
2008-02-05 06:29:03 +00:00
|
|
|
struct mm_struct *mm;
|
2014-10-09 22:25:36 +00:00
|
|
|
struct vm_area_struct *vma;
|
2008-02-05 06:29:03 +00:00
|
|
|
|
2020-04-07 03:09:11 +00:00
|
|
|
/* See m_next(). Zero at the start or after lseek. */
|
2014-10-09 22:25:41 +00:00
|
|
|
if (last_addr == -1UL)
|
|
|
|
return NULL;
|
|
|
|
|
2014-10-09 22:25:51 +00:00
|
|
|
priv->task = get_proc_task(priv->inode);
|
2008-02-05 06:29:03 +00:00
|
|
|
if (!priv->task)
|
2011-02-16 03:22:54 +00:00
|
|
|
return ERR_PTR(-ESRCH);
|
2008-02-05 06:29:03 +00:00
|
|
|
|
2014-10-09 22:25:26 +00:00
|
|
|
mm = priv->mm;
|
2020-04-07 03:09:08 +00:00
|
|
|
if (!mm || !mmget_not_zero(mm)) {
|
|
|
|
put_task_struct(priv->task);
|
|
|
|
priv->task = NULL;
|
2014-10-09 22:25:26 +00:00
|
|
|
return NULL;
|
2020-04-07 03:09:08 +00:00
|
|
|
}
|
2008-02-05 06:29:03 +00:00
|
|
|
|
2020-06-09 04:33:25 +00:00
|
|
|
if (mmap_read_lock_killable(mm)) {
|
2019-07-12 03:59:50 +00:00
|
|
|
mmput(mm);
|
2020-04-07 03:09:08 +00:00
|
|
|
put_task_struct(priv->task);
|
|
|
|
priv->task = NULL;
|
2019-07-12 03:59:50 +00:00
|
|
|
return ERR_PTR(-EINTR);
|
|
|
|
}
|
|
|
|
|
2012-10-19 08:00:55 +00:00
|
|
|
hold_task_mempolicy(priv);
|
2014-10-09 22:25:36 +00:00
|
|
|
priv->tail_vma = get_gate_vma(mm);
|
2008-02-05 06:29:03 +00:00
|
|
|
|
2020-04-07 03:09:11 +00:00
|
|
|
vma = find_vma(mm, last_addr);
|
|
|
|
if (vma)
|
2008-02-05 06:29:03 +00:00
|
|
|
return vma;
|
2014-10-09 22:25:28 +00:00
|
|
|
|
2020-04-07 03:09:11 +00:00
|
|
|
return priv->tail_vma;
|
2008-02-05 06:29:03 +00:00
|
|
|
}
|
|
|
|
|
2020-04-07 03:09:14 +00:00
|
|
|
static void *m_next(struct seq_file *m, void *v, loff_t *ppos)
|
2008-02-05 06:29:03 +00:00
|
|
|
{
|
|
|
|
struct proc_maps_private *priv = m->private;
|
2020-04-07 03:09:20 +00:00
|
|
|
struct vm_area_struct *next, *vma = v;
|
|
|
|
|
|
|
|
if (vma == priv->tail_vma)
|
|
|
|
next = NULL;
|
|
|
|
else if (vma->vm_next)
|
|
|
|
next = vma->vm_next;
|
|
|
|
else
|
|
|
|
next = priv->tail_vma;
|
2008-02-05 06:29:03 +00:00
|
|
|
|
2020-04-07 03:09:14 +00:00
|
|
|
*ppos = next ? next->vm_start : -1UL;
|
2020-04-07 03:09:11 +00:00
|
|
|
|
2014-10-09 22:25:28 +00:00
|
|
|
return next;
|
2008-02-05 06:29:03 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static void m_stop(struct seq_file *m, void *v)
|
|
|
|
{
|
|
|
|
struct proc_maps_private *priv = m->private;
|
2020-04-07 03:09:08 +00:00
|
|
|
struct mm_struct *mm = priv->mm;
|
2008-02-05 06:29:03 +00:00
|
|
|
|
2020-04-07 03:09:08 +00:00
|
|
|
if (!priv->task)
|
|
|
|
return;
|
|
|
|
|
|
|
|
release_task_mempolicy(priv);
|
2020-06-09 04:33:25 +00:00
|
|
|
mmap_read_unlock(mm);
|
2020-04-07 03:09:08 +00:00
|
|
|
mmput(mm);
|
|
|
|
put_task_struct(priv->task);
|
|
|
|
priv->task = NULL;
|
2008-02-05 06:29:03 +00:00
|
|
|
}
|
|
|
|
|
2014-10-09 22:25:21 +00:00
|
|
|
static int proc_maps_open(struct inode *inode, struct file *file,
|
|
|
|
const struct seq_operations *ops, int psize)
|
|
|
|
{
|
|
|
|
struct proc_maps_private *priv = __seq_open_private(file, ops, psize);
|
|
|
|
|
|
|
|
if (!priv)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
2014-10-09 22:25:51 +00:00
|
|
|
priv->inode = inode;
|
2014-10-09 22:25:26 +00:00
|
|
|
priv->mm = proc_mem_open(inode, PTRACE_MODE_READ);
|
|
|
|
if (IS_ERR(priv->mm)) {
|
|
|
|
int err = PTR_ERR(priv->mm);
|
|
|
|
|
|
|
|
seq_release_private(inode, file);
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
2014-10-09 22:25:21 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2014-10-09 22:25:26 +00:00
|
|
|
static int proc_map_release(struct inode *inode, struct file *file)
|
|
|
|
{
|
|
|
|
struct seq_file *seq = file->private_data;
|
|
|
|
struct proc_maps_private *priv = seq->private;
|
|
|
|
|
|
|
|
if (priv->mm)
|
|
|
|
mmdrop(priv->mm);
|
|
|
|
|
|
|
|
return seq_release_private(inode, file);
|
|
|
|
}
|
|
|
|
|
2008-02-05 06:29:03 +00:00
|
|
|
static int do_maps_open(struct inode *inode, struct file *file,
|
2008-02-08 12:21:19 +00:00
|
|
|
const struct seq_operations *ops)
|
2008-02-05 06:29:03 +00:00
|
|
|
{
|
2014-10-09 22:25:21 +00:00
|
|
|
return proc_maps_open(inode, file, ops,
|
|
|
|
sizeof(struct proc_maps_private));
|
2008-02-05 06:29:03 +00:00
|
|
|
}
|
2005-09-03 22:55:10 +00:00
|
|
|
|
2016-02-03 00:57:29 +00:00
|
|
|
/*
|
|
|
|
* Indicate if the VMA is a stack for the given task; for
|
|
|
|
* /proc/PID/maps that is the stack of the main task.
|
|
|
|
*/
|
2017-09-08 23:13:35 +00:00
|
|
|
static int is_stack(struct vm_area_struct *vma)
|
2014-10-09 22:25:54 +00:00
|
|
|
{
|
2016-09-30 17:58:57 +00:00
|
|
|
/*
|
|
|
|
* We make no effort to guess what a given thread considers to be
|
|
|
|
* its "stack". It's not even well-defined for programs written
|
|
|
|
* languages like Go.
|
|
|
|
*/
|
|
|
|
return vma->vm_start <= vma->vm_mm->start_stack &&
|
|
|
|
vma->vm_end >= vma->vm_mm->start_stack;
|
2014-10-09 22:25:54 +00:00
|
|
|
}
|
|
|
|
|
mm: add /proc/pid/smaps_rollup
/proc/pid/smaps_rollup is a new proc file that improves the performance
of user programs that determine aggregate memory statistics (e.g., total
PSS) of a process.
Android regularly "samples" the memory usage of various processes in
order to balance its memory pool sizes. This sampling process involves
opening /proc/pid/smaps and summing certain fields. For very large
processes, sampling memory use this way can take several hundred
milliseconds, due mostly to the overhead of the seq_printf calls in
task_mmu.c.
smaps_rollup improves the situation. It contains most of the fields of
/proc/pid/smaps, but instead of a set of fields for each VMA,
smaps_rollup instead contains one synthetic smaps-format entry
representing the whole process. In the single smaps_rollup synthetic
entry, each field is the summation of the corresponding field in all of
the real-smaps VMAs. Using a common format for smaps_rollup and smaps
allows userspace parsers to repurpose parsers meant for use with
non-rollup smaps for smaps_rollup, and it allows userspace to switch
between smaps_rollup and smaps at runtime (say, based on the
availability of smaps_rollup in a given kernel) with minimal fuss.
By using smaps_rollup instead of smaps, a caller can avoid the
significant overhead of formatting, reading, and parsing each of a large
process's potentially very numerous memory mappings. For sampling
system_server's PSS in Android, we measured a 12x speedup, representing
a savings of several hundred milliseconds.
One alternative to a new per-process proc file would have been including
PSS information in /proc/pid/status. We considered this option but
thought that PSS would be too expensive (by a few orders of magnitude)
to collect relative to what's already emitted as part of
/proc/pid/status, and slowing every user of /proc/pid/status for the
sake of readers that happen to want PSS feels wrong.
The code itself works by reusing the existing VMA-walking framework we
use for regular smaps generation and keeping the mem_size_stats
structure around between VMA walks instead of using a fresh one for each
VMA. In this way, summation happens automatically. We let seq_file
walk over the VMAs just as it does for regular smaps and just emit
nothing to the seq_file until we hit the last VMA.
Benchmarks:
using smaps:
iterations:1000 pid:1163 pss:220023808
0m29.46s real 0m08.28s user 0m20.98s system
using smaps_rollup:
iterations:1000 pid:1163 pss:220702720
0m04.39s real 0m00.03s user 0m04.31s system
We're using the PSS samples we collect asynchronously for
system-management tasks like fine-tuning oom_adj_score, memory use
tracking for debugging, application-level memory-use attribution, and
deciding whether we want to kill large processes during system idle
maintenance windows. Android has been using PSS for these purposes for
a long time; as the average process VMA count has increased and and
devices become more efficiency-conscious, PSS-collection inefficiency
has started to matter more. IMHO, it'd be a lot safer to optimize the
existing PSS-collection model, which has been fine-tuned over the years,
instead of changing the memory tracking approach entirely to work around
smaps-generation inefficiency.
Tim said:
: There are two main reasons why Android gathers PSS information:
:
: 1. Android devices can show the user the amount of memory used per
: application via the settings app. This is a less important use case.
:
: 2. We log PSS to help identify leaks in applications. We have found
: an enormous number of bugs (in the Android platform, in Google's own
: apps, and in third-party applications) using this data.
:
: To do this, system_server (the main process in Android userspace) will
: sample the PSS of a process three seconds after it changes state (for
: example, app is launched and becomes the foreground application) and about
: every ten minutes after that. The net result is that PSS collection is
: regularly running on at least one process in the system (usually a few
: times a minute while the screen is on, less when screen is off due to
: suspend). PSS of a process is an incredibly useful stat to track, and we
: aren't going to get rid of it. We've looked at some very hacky approaches
: using RSS ("take the RSS of the target process, subtract the RSS of the
: zygote process that is the parent of all Android apps") to reduce the
: accounting time, but it regularly overestimated the memory used by 20+
: percent. Accordingly, I don't think that there's a good alternative to
: using PSS.
:
: We started looking into PSS collection performance after we noticed random
: frequency spikes while a phone's screen was off; occasionally, one of the
: CPU clusters would ramp to a high frequency because there was 200-300ms of
: constant CPU work from a single thread in the main Android userspace
: process. The work causing the spike (which is reasonable governor
: behavior given the amount of CPU time needed) was always PSS collection.
: As a result, Android is burning more power than we should be on PSS
: collection.
:
: The other issue (and why I'm less sure about improving smaps as a
: long-term solution) is that the number of VMAs per process has increased
: significantly from release to release. After trying to figure out why we
: were seeing these 200-300ms PSS collection times on Android O but had not
: noticed it in previous versions, we found that the number of VMAs in the
: main system process increased by 50% from Android N to Android O (from
: ~1800 to ~2700) and varying increases in every userspace process. Android
: M to N also had an increase in the number of VMAs, although not as much.
: I'm not sure why this is increasing so much over time, but thinking about
: ASLR and ways to make ASLR better, I expect that this will continue to
: increase going forward. I would not be surprised if we hit 5000 VMAs on
: the main Android process (system_server) by 2020.
:
: If we assume that the number of VMAs is going to increase over time, then
: doing anything we can do to reduce the overhead of each VMA during PSS
: collection seems like the right way to go, and that means outputting an
: aggregate statistic (to avoid whatever overhead there is per line in
: writing smaps and in reading each line from userspace).
Link: http://lkml.kernel.org/r/20170812022148.178293-1-dancol@google.com
Signed-off-by: Daniel Colascione <dancol@google.com>
Cc: Tim Murray <timmurray@google.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:25:08 +00:00
|
|
|
static void show_vma_header_prefix(struct seq_file *m,
|
|
|
|
unsigned long start, unsigned long end,
|
|
|
|
vm_flags_t flags, unsigned long long pgoff,
|
|
|
|
dev_t dev, unsigned long ino)
|
|
|
|
{
|
|
|
|
seq_setwidth(m, 25 + sizeof(void *) * 6 - 1);
|
2018-04-10 23:30:44 +00:00
|
|
|
seq_put_hex_ll(m, NULL, start, 8);
|
|
|
|
seq_put_hex_ll(m, "-", end, 8);
|
|
|
|
seq_putc(m, ' ');
|
|
|
|
seq_putc(m, flags & VM_READ ? 'r' : '-');
|
|
|
|
seq_putc(m, flags & VM_WRITE ? 'w' : '-');
|
|
|
|
seq_putc(m, flags & VM_EXEC ? 'x' : '-');
|
|
|
|
seq_putc(m, flags & VM_MAYSHARE ? 's' : 'p');
|
|
|
|
seq_put_hex_ll(m, " ", pgoff, 8);
|
|
|
|
seq_put_hex_ll(m, " ", MAJOR(dev), 2);
|
|
|
|
seq_put_hex_ll(m, ":", MINOR(dev), 2);
|
|
|
|
seq_put_decimal_ull(m, " ", ino);
|
|
|
|
seq_putc(m, ' ');
|
mm: add /proc/pid/smaps_rollup
/proc/pid/smaps_rollup is a new proc file that improves the performance
of user programs that determine aggregate memory statistics (e.g., total
PSS) of a process.
Android regularly "samples" the memory usage of various processes in
order to balance its memory pool sizes. This sampling process involves
opening /proc/pid/smaps and summing certain fields. For very large
processes, sampling memory use this way can take several hundred
milliseconds, due mostly to the overhead of the seq_printf calls in
task_mmu.c.
smaps_rollup improves the situation. It contains most of the fields of
/proc/pid/smaps, but instead of a set of fields for each VMA,
smaps_rollup instead contains one synthetic smaps-format entry
representing the whole process. In the single smaps_rollup synthetic
entry, each field is the summation of the corresponding field in all of
the real-smaps VMAs. Using a common format for smaps_rollup and smaps
allows userspace parsers to repurpose parsers meant for use with
non-rollup smaps for smaps_rollup, and it allows userspace to switch
between smaps_rollup and smaps at runtime (say, based on the
availability of smaps_rollup in a given kernel) with minimal fuss.
By using smaps_rollup instead of smaps, a caller can avoid the
significant overhead of formatting, reading, and parsing each of a large
process's potentially very numerous memory mappings. For sampling
system_server's PSS in Android, we measured a 12x speedup, representing
a savings of several hundred milliseconds.
One alternative to a new per-process proc file would have been including
PSS information in /proc/pid/status. We considered this option but
thought that PSS would be too expensive (by a few orders of magnitude)
to collect relative to what's already emitted as part of
/proc/pid/status, and slowing every user of /proc/pid/status for the
sake of readers that happen to want PSS feels wrong.
The code itself works by reusing the existing VMA-walking framework we
use for regular smaps generation and keeping the mem_size_stats
structure around between VMA walks instead of using a fresh one for each
VMA. In this way, summation happens automatically. We let seq_file
walk over the VMAs just as it does for regular smaps and just emit
nothing to the seq_file until we hit the last VMA.
Benchmarks:
using smaps:
iterations:1000 pid:1163 pss:220023808
0m29.46s real 0m08.28s user 0m20.98s system
using smaps_rollup:
iterations:1000 pid:1163 pss:220702720
0m04.39s real 0m00.03s user 0m04.31s system
We're using the PSS samples we collect asynchronously for
system-management tasks like fine-tuning oom_adj_score, memory use
tracking for debugging, application-level memory-use attribution, and
deciding whether we want to kill large processes during system idle
maintenance windows. Android has been using PSS for these purposes for
a long time; as the average process VMA count has increased and and
devices become more efficiency-conscious, PSS-collection inefficiency
has started to matter more. IMHO, it'd be a lot safer to optimize the
existing PSS-collection model, which has been fine-tuned over the years,
instead of changing the memory tracking approach entirely to work around
smaps-generation inefficiency.
Tim said:
: There are two main reasons why Android gathers PSS information:
:
: 1. Android devices can show the user the amount of memory used per
: application via the settings app. This is a less important use case.
:
: 2. We log PSS to help identify leaks in applications. We have found
: an enormous number of bugs (in the Android platform, in Google's own
: apps, and in third-party applications) using this data.
:
: To do this, system_server (the main process in Android userspace) will
: sample the PSS of a process three seconds after it changes state (for
: example, app is launched and becomes the foreground application) and about
: every ten minutes after that. The net result is that PSS collection is
: regularly running on at least one process in the system (usually a few
: times a minute while the screen is on, less when screen is off due to
: suspend). PSS of a process is an incredibly useful stat to track, and we
: aren't going to get rid of it. We've looked at some very hacky approaches
: using RSS ("take the RSS of the target process, subtract the RSS of the
: zygote process that is the parent of all Android apps") to reduce the
: accounting time, but it regularly overestimated the memory used by 20+
: percent. Accordingly, I don't think that there's a good alternative to
: using PSS.
:
: We started looking into PSS collection performance after we noticed random
: frequency spikes while a phone's screen was off; occasionally, one of the
: CPU clusters would ramp to a high frequency because there was 200-300ms of
: constant CPU work from a single thread in the main Android userspace
: process. The work causing the spike (which is reasonable governor
: behavior given the amount of CPU time needed) was always PSS collection.
: As a result, Android is burning more power than we should be on PSS
: collection.
:
: The other issue (and why I'm less sure about improving smaps as a
: long-term solution) is that the number of VMAs per process has increased
: significantly from release to release. After trying to figure out why we
: were seeing these 200-300ms PSS collection times on Android O but had not
: noticed it in previous versions, we found that the number of VMAs in the
: main system process increased by 50% from Android N to Android O (from
: ~1800 to ~2700) and varying increases in every userspace process. Android
: M to N also had an increase in the number of VMAs, although not as much.
: I'm not sure why this is increasing so much over time, but thinking about
: ASLR and ways to make ASLR better, I expect that this will continue to
: increase going forward. I would not be surprised if we hit 5000 VMAs on
: the main Android process (system_server) by 2020.
:
: If we assume that the number of VMAs is going to increase over time, then
: doing anything we can do to reduce the overhead of each VMA during PSS
: collection seems like the right way to go, and that means outputting an
: aggregate statistic (to avoid whatever overhead there is per line in
: writing smaps and in reading each line from userspace).
Link: http://lkml.kernel.org/r/20170812022148.178293-1-dancol@google.com
Signed-off-by: Daniel Colascione <dancol@google.com>
Cc: Tim Murray <timmurray@google.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:25:08 +00:00
|
|
|
}
|
|
|
|
|
procfs: mark thread stack correctly in proc/<pid>/maps
Stack for a new thread is mapped by userspace code and passed via
sys_clone. This memory is currently seen as anonymous in
/proc/<pid>/maps, which makes it difficult to ascertain which mappings
are being used for thread stacks. This patch uses the individual task
stack pointers to determine which vmas are actually thread stacks.
For a multithreaded program like the following:
#include <pthread.h>
void *thread_main(void *foo)
{
while(1);
}
int main()
{
pthread_t t;
pthread_create(&t, NULL, thread_main, NULL);
pthread_join(t, NULL);
}
proc/PID/maps looks like the following:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
Here, one could guess that 7f8a44492000-7f8a44c92000 is a stack since
the earlier vma that has no permissions (7f8a44e3d000-7f8a4503d000) but
that is not always a reliable way to find out which vma is a thread
stack. Also, /proc/PID/maps and /proc/PID/task/TID/maps has the same
content.
With this patch in place, /proc/PID/task/TID/maps are treated as 'maps
as the task would see it' and hence, only the vma that that task uses as
stack is marked as [stack]. All other 'stack' vmas are marked as
anonymous memory. /proc/PID/maps acts as a thread group level view,
where all thread stack vmas are marked as [stack:TID] where TID is the
process ID of the task that uses that vma as stack, while the process
stack is marked as [stack].
So /proc/PID/maps will look like this:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack:1442]
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
Thus marking all vmas that are used as stacks by the threads in the
thread group along with the process stack. The task level maps will
however like this:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack]
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
where only the vma that is being used as a stack by *that* task is
marked as [stack].
Analogous changes have been made to /proc/PID/smaps,
/proc/PID/numa_maps, /proc/PID/task/TID/smaps and
/proc/PID/task/TID/numa_maps. Relevant snippets from smaps and
numa_maps:
[siddhesh@localhost ~ ]$ pgrep a.out
1441
[siddhesh@localhost ~ ]$ cat /proc/1441/smaps | grep "\[stack"
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack:1442]
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1442/smaps | grep "\[stack"
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1441/smaps | grep "\[stack"
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/numa_maps | grep "stack"
7f8a44492000 default stack:1442 anon=2 dirty=2 N0=2
7fff6273a000 default stack anon=3 dirty=3 N0=3
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1442/numa_maps | grep "stack"
7f8a44492000 default stack anon=2 dirty=2 N0=2
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1441/numa_maps | grep "stack"
7fff6273a000 default stack anon=3 dirty=3 N0=3
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix build]
Signed-off-by: Siddhesh Poyarekar <siddhesh.poyarekar@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jamie Lokier <jamie@shareable.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:04 +00:00
|
|
|
static void
|
2018-08-22 04:52:48 +00:00
|
|
|
show_map_vma(struct seq_file *m, struct vm_area_struct *vma)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2005-09-03 22:55:10 +00:00
|
|
|
struct mm_struct *mm = vma->vm_mm;
|
|
|
|
struct file *file = vma->vm_file;
|
2011-05-26 10:16:19 +00:00
|
|
|
vm_flags_t flags = vma->vm_flags;
|
2005-04-16 22:20:36 +00:00
|
|
|
unsigned long ino = 0;
|
2009-04-07 02:00:30 +00:00
|
|
|
unsigned long long pgoff = 0;
|
2011-05-09 11:01:09 +00:00
|
|
|
unsigned long start, end;
|
2005-04-16 22:20:36 +00:00
|
|
|
dev_t dev = 0;
|
procfs: mark thread stack correctly in proc/<pid>/maps
Stack for a new thread is mapped by userspace code and passed via
sys_clone. This memory is currently seen as anonymous in
/proc/<pid>/maps, which makes it difficult to ascertain which mappings
are being used for thread stacks. This patch uses the individual task
stack pointers to determine which vmas are actually thread stacks.
For a multithreaded program like the following:
#include <pthread.h>
void *thread_main(void *foo)
{
while(1);
}
int main()
{
pthread_t t;
pthread_create(&t, NULL, thread_main, NULL);
pthread_join(t, NULL);
}
proc/PID/maps looks like the following:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
Here, one could guess that 7f8a44492000-7f8a44c92000 is a stack since
the earlier vma that has no permissions (7f8a44e3d000-7f8a4503d000) but
that is not always a reliable way to find out which vma is a thread
stack. Also, /proc/PID/maps and /proc/PID/task/TID/maps has the same
content.
With this patch in place, /proc/PID/task/TID/maps are treated as 'maps
as the task would see it' and hence, only the vma that that task uses as
stack is marked as [stack]. All other 'stack' vmas are marked as
anonymous memory. /proc/PID/maps acts as a thread group level view,
where all thread stack vmas are marked as [stack:TID] where TID is the
process ID of the task that uses that vma as stack, while the process
stack is marked as [stack].
So /proc/PID/maps will look like this:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack:1442]
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
Thus marking all vmas that are used as stacks by the threads in the
thread group along with the process stack. The task level maps will
however like this:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack]
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
where only the vma that is being used as a stack by *that* task is
marked as [stack].
Analogous changes have been made to /proc/PID/smaps,
/proc/PID/numa_maps, /proc/PID/task/TID/smaps and
/proc/PID/task/TID/numa_maps. Relevant snippets from smaps and
numa_maps:
[siddhesh@localhost ~ ]$ pgrep a.out
1441
[siddhesh@localhost ~ ]$ cat /proc/1441/smaps | grep "\[stack"
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack:1442]
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1442/smaps | grep "\[stack"
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1441/smaps | grep "\[stack"
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/numa_maps | grep "stack"
7f8a44492000 default stack:1442 anon=2 dirty=2 N0=2
7fff6273a000 default stack anon=3 dirty=3 N0=3
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1442/numa_maps | grep "stack"
7f8a44492000 default stack anon=2 dirty=2 N0=2
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1441/numa_maps | grep "stack"
7fff6273a000 default stack anon=3 dirty=3 N0=3
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix build]
Signed-off-by: Siddhesh Poyarekar <siddhesh.poyarekar@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jamie Lokier <jamie@shareable.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:04 +00:00
|
|
|
const char *name = NULL;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
if (file) {
|
2013-01-23 22:07:38 +00:00
|
|
|
struct inode *inode = file_inode(vma->vm_file);
|
2005-04-16 22:20:36 +00:00
|
|
|
dev = inode->i_sb->s_dev;
|
|
|
|
ino = inode->i_ino;
|
2009-04-07 02:00:30 +00:00
|
|
|
pgoff = ((loff_t)vma->vm_pgoff) << PAGE_SHIFT;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
2010-08-15 18:35:52 +00:00
|
|
|
start = vma->vm_start;
|
2011-05-09 11:01:09 +00:00
|
|
|
end = vma->vm_end;
|
mm: add /proc/pid/smaps_rollup
/proc/pid/smaps_rollup is a new proc file that improves the performance
of user programs that determine aggregate memory statistics (e.g., total
PSS) of a process.
Android regularly "samples" the memory usage of various processes in
order to balance its memory pool sizes. This sampling process involves
opening /proc/pid/smaps and summing certain fields. For very large
processes, sampling memory use this way can take several hundred
milliseconds, due mostly to the overhead of the seq_printf calls in
task_mmu.c.
smaps_rollup improves the situation. It contains most of the fields of
/proc/pid/smaps, but instead of a set of fields for each VMA,
smaps_rollup instead contains one synthetic smaps-format entry
representing the whole process. In the single smaps_rollup synthetic
entry, each field is the summation of the corresponding field in all of
the real-smaps VMAs. Using a common format for smaps_rollup and smaps
allows userspace parsers to repurpose parsers meant for use with
non-rollup smaps for smaps_rollup, and it allows userspace to switch
between smaps_rollup and smaps at runtime (say, based on the
availability of smaps_rollup in a given kernel) with minimal fuss.
By using smaps_rollup instead of smaps, a caller can avoid the
significant overhead of formatting, reading, and parsing each of a large
process's potentially very numerous memory mappings. For sampling
system_server's PSS in Android, we measured a 12x speedup, representing
a savings of several hundred milliseconds.
One alternative to a new per-process proc file would have been including
PSS information in /proc/pid/status. We considered this option but
thought that PSS would be too expensive (by a few orders of magnitude)
to collect relative to what's already emitted as part of
/proc/pid/status, and slowing every user of /proc/pid/status for the
sake of readers that happen to want PSS feels wrong.
The code itself works by reusing the existing VMA-walking framework we
use for regular smaps generation and keeping the mem_size_stats
structure around between VMA walks instead of using a fresh one for each
VMA. In this way, summation happens automatically. We let seq_file
walk over the VMAs just as it does for regular smaps and just emit
nothing to the seq_file until we hit the last VMA.
Benchmarks:
using smaps:
iterations:1000 pid:1163 pss:220023808
0m29.46s real 0m08.28s user 0m20.98s system
using smaps_rollup:
iterations:1000 pid:1163 pss:220702720
0m04.39s real 0m00.03s user 0m04.31s system
We're using the PSS samples we collect asynchronously for
system-management tasks like fine-tuning oom_adj_score, memory use
tracking for debugging, application-level memory-use attribution, and
deciding whether we want to kill large processes during system idle
maintenance windows. Android has been using PSS for these purposes for
a long time; as the average process VMA count has increased and and
devices become more efficiency-conscious, PSS-collection inefficiency
has started to matter more. IMHO, it'd be a lot safer to optimize the
existing PSS-collection model, which has been fine-tuned over the years,
instead of changing the memory tracking approach entirely to work around
smaps-generation inefficiency.
Tim said:
: There are two main reasons why Android gathers PSS information:
:
: 1. Android devices can show the user the amount of memory used per
: application via the settings app. This is a less important use case.
:
: 2. We log PSS to help identify leaks in applications. We have found
: an enormous number of bugs (in the Android platform, in Google's own
: apps, and in third-party applications) using this data.
:
: To do this, system_server (the main process in Android userspace) will
: sample the PSS of a process three seconds after it changes state (for
: example, app is launched and becomes the foreground application) and about
: every ten minutes after that. The net result is that PSS collection is
: regularly running on at least one process in the system (usually a few
: times a minute while the screen is on, less when screen is off due to
: suspend). PSS of a process is an incredibly useful stat to track, and we
: aren't going to get rid of it. We've looked at some very hacky approaches
: using RSS ("take the RSS of the target process, subtract the RSS of the
: zygote process that is the parent of all Android apps") to reduce the
: accounting time, but it regularly overestimated the memory used by 20+
: percent. Accordingly, I don't think that there's a good alternative to
: using PSS.
:
: We started looking into PSS collection performance after we noticed random
: frequency spikes while a phone's screen was off; occasionally, one of the
: CPU clusters would ramp to a high frequency because there was 200-300ms of
: constant CPU work from a single thread in the main Android userspace
: process. The work causing the spike (which is reasonable governor
: behavior given the amount of CPU time needed) was always PSS collection.
: As a result, Android is burning more power than we should be on PSS
: collection.
:
: The other issue (and why I'm less sure about improving smaps as a
: long-term solution) is that the number of VMAs per process has increased
: significantly from release to release. After trying to figure out why we
: were seeing these 200-300ms PSS collection times on Android O but had not
: noticed it in previous versions, we found that the number of VMAs in the
: main system process increased by 50% from Android N to Android O (from
: ~1800 to ~2700) and varying increases in every userspace process. Android
: M to N also had an increase in the number of VMAs, although not as much.
: I'm not sure why this is increasing so much over time, but thinking about
: ASLR and ways to make ASLR better, I expect that this will continue to
: increase going forward. I would not be surprised if we hit 5000 VMAs on
: the main Android process (system_server) by 2020.
:
: If we assume that the number of VMAs is going to increase over time, then
: doing anything we can do to reduce the overhead of each VMA during PSS
: collection seems like the right way to go, and that means outputting an
: aggregate statistic (to avoid whatever overhead there is per line in
: writing smaps and in reading each line from userspace).
Link: http://lkml.kernel.org/r/20170812022148.178293-1-dancol@google.com
Signed-off-by: Daniel Colascione <dancol@google.com>
Cc: Tim Murray <timmurray@google.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:25:08 +00:00
|
|
|
show_vma_header_prefix(m, start, end, flags, pgoff, dev, ino);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Print the dentry name for named mappings, and a
|
|
|
|
* special [heap] marker for the heap:
|
|
|
|
*/
|
2005-09-03 22:55:10 +00:00
|
|
|
if (file) {
|
2013-11-14 22:31:57 +00:00
|
|
|
seq_pad(m, ' ');
|
2015-06-19 08:30:28 +00:00
|
|
|
seq_file_path(m, file, "\n");
|
procfs: mark thread stack correctly in proc/<pid>/maps
Stack for a new thread is mapped by userspace code and passed via
sys_clone. This memory is currently seen as anonymous in
/proc/<pid>/maps, which makes it difficult to ascertain which mappings
are being used for thread stacks. This patch uses the individual task
stack pointers to determine which vmas are actually thread stacks.
For a multithreaded program like the following:
#include <pthread.h>
void *thread_main(void *foo)
{
while(1);
}
int main()
{
pthread_t t;
pthread_create(&t, NULL, thread_main, NULL);
pthread_join(t, NULL);
}
proc/PID/maps looks like the following:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
Here, one could guess that 7f8a44492000-7f8a44c92000 is a stack since
the earlier vma that has no permissions (7f8a44e3d000-7f8a4503d000) but
that is not always a reliable way to find out which vma is a thread
stack. Also, /proc/PID/maps and /proc/PID/task/TID/maps has the same
content.
With this patch in place, /proc/PID/task/TID/maps are treated as 'maps
as the task would see it' and hence, only the vma that that task uses as
stack is marked as [stack]. All other 'stack' vmas are marked as
anonymous memory. /proc/PID/maps acts as a thread group level view,
where all thread stack vmas are marked as [stack:TID] where TID is the
process ID of the task that uses that vma as stack, while the process
stack is marked as [stack].
So /proc/PID/maps will look like this:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack:1442]
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
Thus marking all vmas that are used as stacks by the threads in the
thread group along with the process stack. The task level maps will
however like this:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack]
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
where only the vma that is being used as a stack by *that* task is
marked as [stack].
Analogous changes have been made to /proc/PID/smaps,
/proc/PID/numa_maps, /proc/PID/task/TID/smaps and
/proc/PID/task/TID/numa_maps. Relevant snippets from smaps and
numa_maps:
[siddhesh@localhost ~ ]$ pgrep a.out
1441
[siddhesh@localhost ~ ]$ cat /proc/1441/smaps | grep "\[stack"
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack:1442]
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1442/smaps | grep "\[stack"
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1441/smaps | grep "\[stack"
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/numa_maps | grep "stack"
7f8a44492000 default stack:1442 anon=2 dirty=2 N0=2
7fff6273a000 default stack anon=3 dirty=3 N0=3
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1442/numa_maps | grep "stack"
7f8a44492000 default stack anon=2 dirty=2 N0=2
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1441/numa_maps | grep "stack"
7fff6273a000 default stack anon=3 dirty=3 N0=3
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix build]
Signed-off-by: Siddhesh Poyarekar <siddhesh.poyarekar@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jamie Lokier <jamie@shareable.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:04 +00:00
|
|
|
goto done;
|
|
|
|
}
|
|
|
|
|
2014-05-19 22:58:32 +00:00
|
|
|
if (vma->vm_ops && vma->vm_ops->name) {
|
|
|
|
name = vma->vm_ops->name(vma);
|
|
|
|
if (name)
|
|
|
|
goto done;
|
|
|
|
}
|
|
|
|
|
procfs: mark thread stack correctly in proc/<pid>/maps
Stack for a new thread is mapped by userspace code and passed via
sys_clone. This memory is currently seen as anonymous in
/proc/<pid>/maps, which makes it difficult to ascertain which mappings
are being used for thread stacks. This patch uses the individual task
stack pointers to determine which vmas are actually thread stacks.
For a multithreaded program like the following:
#include <pthread.h>
void *thread_main(void *foo)
{
while(1);
}
int main()
{
pthread_t t;
pthread_create(&t, NULL, thread_main, NULL);
pthread_join(t, NULL);
}
proc/PID/maps looks like the following:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
Here, one could guess that 7f8a44492000-7f8a44c92000 is a stack since
the earlier vma that has no permissions (7f8a44e3d000-7f8a4503d000) but
that is not always a reliable way to find out which vma is a thread
stack. Also, /proc/PID/maps and /proc/PID/task/TID/maps has the same
content.
With this patch in place, /proc/PID/task/TID/maps are treated as 'maps
as the task would see it' and hence, only the vma that that task uses as
stack is marked as [stack]. All other 'stack' vmas are marked as
anonymous memory. /proc/PID/maps acts as a thread group level view,
where all thread stack vmas are marked as [stack:TID] where TID is the
process ID of the task that uses that vma as stack, while the process
stack is marked as [stack].
So /proc/PID/maps will look like this:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack:1442]
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
Thus marking all vmas that are used as stacks by the threads in the
thread group along with the process stack. The task level maps will
however like this:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack]
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
where only the vma that is being used as a stack by *that* task is
marked as [stack].
Analogous changes have been made to /proc/PID/smaps,
/proc/PID/numa_maps, /proc/PID/task/TID/smaps and
/proc/PID/task/TID/numa_maps. Relevant snippets from smaps and
numa_maps:
[siddhesh@localhost ~ ]$ pgrep a.out
1441
[siddhesh@localhost ~ ]$ cat /proc/1441/smaps | grep "\[stack"
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack:1442]
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1442/smaps | grep "\[stack"
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1441/smaps | grep "\[stack"
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/numa_maps | grep "stack"
7f8a44492000 default stack:1442 anon=2 dirty=2 N0=2
7fff6273a000 default stack anon=3 dirty=3 N0=3
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1442/numa_maps | grep "stack"
7f8a44492000 default stack anon=2 dirty=2 N0=2
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1441/numa_maps | grep "stack"
7fff6273a000 default stack anon=3 dirty=3 N0=3
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix build]
Signed-off-by: Siddhesh Poyarekar <siddhesh.poyarekar@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jamie Lokier <jamie@shareable.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:04 +00:00
|
|
|
name = arch_vma_name(vma);
|
|
|
|
if (!name) {
|
|
|
|
if (!mm) {
|
|
|
|
name = "[vdso]";
|
|
|
|
goto done;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (vma->vm_start <= mm->brk &&
|
|
|
|
vma->vm_end >= mm->start_brk) {
|
|
|
|
name = "[heap]";
|
|
|
|
goto done;
|
|
|
|
}
|
|
|
|
|
2017-09-08 23:13:35 +00:00
|
|
|
if (is_stack(vma))
|
2016-02-03 00:57:29 +00:00
|
|
|
name = "[stack]";
|
procfs: mark thread stack correctly in proc/<pid>/maps
Stack for a new thread is mapped by userspace code and passed via
sys_clone. This memory is currently seen as anonymous in
/proc/<pid>/maps, which makes it difficult to ascertain which mappings
are being used for thread stacks. This patch uses the individual task
stack pointers to determine which vmas are actually thread stacks.
For a multithreaded program like the following:
#include <pthread.h>
void *thread_main(void *foo)
{
while(1);
}
int main()
{
pthread_t t;
pthread_create(&t, NULL, thread_main, NULL);
pthread_join(t, NULL);
}
proc/PID/maps looks like the following:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
Here, one could guess that 7f8a44492000-7f8a44c92000 is a stack since
the earlier vma that has no permissions (7f8a44e3d000-7f8a4503d000) but
that is not always a reliable way to find out which vma is a thread
stack. Also, /proc/PID/maps and /proc/PID/task/TID/maps has the same
content.
With this patch in place, /proc/PID/task/TID/maps are treated as 'maps
as the task would see it' and hence, only the vma that that task uses as
stack is marked as [stack]. All other 'stack' vmas are marked as
anonymous memory. /proc/PID/maps acts as a thread group level view,
where all thread stack vmas are marked as [stack:TID] where TID is the
process ID of the task that uses that vma as stack, while the process
stack is marked as [stack].
So /proc/PID/maps will look like this:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack:1442]
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
Thus marking all vmas that are used as stacks by the threads in the
thread group along with the process stack. The task level maps will
however like this:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack]
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
where only the vma that is being used as a stack by *that* task is
marked as [stack].
Analogous changes have been made to /proc/PID/smaps,
/proc/PID/numa_maps, /proc/PID/task/TID/smaps and
/proc/PID/task/TID/numa_maps. Relevant snippets from smaps and
numa_maps:
[siddhesh@localhost ~ ]$ pgrep a.out
1441
[siddhesh@localhost ~ ]$ cat /proc/1441/smaps | grep "\[stack"
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack:1442]
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1442/smaps | grep "\[stack"
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1441/smaps | grep "\[stack"
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/numa_maps | grep "stack"
7f8a44492000 default stack:1442 anon=2 dirty=2 N0=2
7fff6273a000 default stack anon=3 dirty=3 N0=3
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1442/numa_maps | grep "stack"
7f8a44492000 default stack anon=2 dirty=2 N0=2
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1441/numa_maps | grep "stack"
7fff6273a000 default stack anon=3 dirty=3 N0=3
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix build]
Signed-off-by: Siddhesh Poyarekar <siddhesh.poyarekar@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jamie Lokier <jamie@shareable.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:04 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
done:
|
|
|
|
if (name) {
|
2013-11-14 22:31:57 +00:00
|
|
|
seq_pad(m, ' ');
|
procfs: mark thread stack correctly in proc/<pid>/maps
Stack for a new thread is mapped by userspace code and passed via
sys_clone. This memory is currently seen as anonymous in
/proc/<pid>/maps, which makes it difficult to ascertain which mappings
are being used for thread stacks. This patch uses the individual task
stack pointers to determine which vmas are actually thread stacks.
For a multithreaded program like the following:
#include <pthread.h>
void *thread_main(void *foo)
{
while(1);
}
int main()
{
pthread_t t;
pthread_create(&t, NULL, thread_main, NULL);
pthread_join(t, NULL);
}
proc/PID/maps looks like the following:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
Here, one could guess that 7f8a44492000-7f8a44c92000 is a stack since
the earlier vma that has no permissions (7f8a44e3d000-7f8a4503d000) but
that is not always a reliable way to find out which vma is a thread
stack. Also, /proc/PID/maps and /proc/PID/task/TID/maps has the same
content.
With this patch in place, /proc/PID/task/TID/maps are treated as 'maps
as the task would see it' and hence, only the vma that that task uses as
stack is marked as [stack]. All other 'stack' vmas are marked as
anonymous memory. /proc/PID/maps acts as a thread group level view,
where all thread stack vmas are marked as [stack:TID] where TID is the
process ID of the task that uses that vma as stack, while the process
stack is marked as [stack].
So /proc/PID/maps will look like this:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack:1442]
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
Thus marking all vmas that are used as stacks by the threads in the
thread group along with the process stack. The task level maps will
however like this:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack]
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
where only the vma that is being used as a stack by *that* task is
marked as [stack].
Analogous changes have been made to /proc/PID/smaps,
/proc/PID/numa_maps, /proc/PID/task/TID/smaps and
/proc/PID/task/TID/numa_maps. Relevant snippets from smaps and
numa_maps:
[siddhesh@localhost ~ ]$ pgrep a.out
1441
[siddhesh@localhost ~ ]$ cat /proc/1441/smaps | grep "\[stack"
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack:1442]
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1442/smaps | grep "\[stack"
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1441/smaps | grep "\[stack"
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/numa_maps | grep "stack"
7f8a44492000 default stack:1442 anon=2 dirty=2 N0=2
7fff6273a000 default stack anon=3 dirty=3 N0=3
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1442/numa_maps | grep "stack"
7f8a44492000 default stack anon=2 dirty=2 N0=2
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1441/numa_maps | grep "stack"
7fff6273a000 default stack anon=3 dirty=3 N0=3
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix build]
Signed-off-by: Siddhesh Poyarekar <siddhesh.poyarekar@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jamie Lokier <jamie@shareable.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:04 +00:00
|
|
|
seq_puts(m, name);
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
seq_putc(m, '\n');
|
2008-10-16 11:27:09 +00:00
|
|
|
}
|
|
|
|
|
2018-08-22 04:52:48 +00:00
|
|
|
static int show_map(struct seq_file *m, void *v)
|
2008-10-16 11:27:09 +00:00
|
|
|
{
|
2018-08-22 04:52:48 +00:00
|
|
|
show_map_vma(m, v);
|
2005-04-16 22:20:36 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2008-02-08 12:21:19 +00:00
|
|
|
static const struct seq_operations proc_pid_maps_op = {
|
2008-02-05 06:29:03 +00:00
|
|
|
.start = m_start,
|
|
|
|
.next = m_next,
|
|
|
|
.stop = m_stop,
|
2018-08-22 04:52:48 +00:00
|
|
|
.show = show_map
|
2008-02-05 06:29:03 +00:00
|
|
|
};
|
|
|
|
|
procfs: mark thread stack correctly in proc/<pid>/maps
Stack for a new thread is mapped by userspace code and passed via
sys_clone. This memory is currently seen as anonymous in
/proc/<pid>/maps, which makes it difficult to ascertain which mappings
are being used for thread stacks. This patch uses the individual task
stack pointers to determine which vmas are actually thread stacks.
For a multithreaded program like the following:
#include <pthread.h>
void *thread_main(void *foo)
{
while(1);
}
int main()
{
pthread_t t;
pthread_create(&t, NULL, thread_main, NULL);
pthread_join(t, NULL);
}
proc/PID/maps looks like the following:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
Here, one could guess that 7f8a44492000-7f8a44c92000 is a stack since
the earlier vma that has no permissions (7f8a44e3d000-7f8a4503d000) but
that is not always a reliable way to find out which vma is a thread
stack. Also, /proc/PID/maps and /proc/PID/task/TID/maps has the same
content.
With this patch in place, /proc/PID/task/TID/maps are treated as 'maps
as the task would see it' and hence, only the vma that that task uses as
stack is marked as [stack]. All other 'stack' vmas are marked as
anonymous memory. /proc/PID/maps acts as a thread group level view,
where all thread stack vmas are marked as [stack:TID] where TID is the
process ID of the task that uses that vma as stack, while the process
stack is marked as [stack].
So /proc/PID/maps will look like this:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack:1442]
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
Thus marking all vmas that are used as stacks by the threads in the
thread group along with the process stack. The task level maps will
however like this:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack]
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
where only the vma that is being used as a stack by *that* task is
marked as [stack].
Analogous changes have been made to /proc/PID/smaps,
/proc/PID/numa_maps, /proc/PID/task/TID/smaps and
/proc/PID/task/TID/numa_maps. Relevant snippets from smaps and
numa_maps:
[siddhesh@localhost ~ ]$ pgrep a.out
1441
[siddhesh@localhost ~ ]$ cat /proc/1441/smaps | grep "\[stack"
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack:1442]
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1442/smaps | grep "\[stack"
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1441/smaps | grep "\[stack"
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/numa_maps | grep "stack"
7f8a44492000 default stack:1442 anon=2 dirty=2 N0=2
7fff6273a000 default stack anon=3 dirty=3 N0=3
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1442/numa_maps | grep "stack"
7f8a44492000 default stack anon=2 dirty=2 N0=2
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1441/numa_maps | grep "stack"
7fff6273a000 default stack anon=3 dirty=3 N0=3
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix build]
Signed-off-by: Siddhesh Poyarekar <siddhesh.poyarekar@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jamie Lokier <jamie@shareable.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:04 +00:00
|
|
|
static int pid_maps_open(struct inode *inode, struct file *file)
|
2008-02-05 06:29:03 +00:00
|
|
|
{
|
|
|
|
return do_maps_open(inode, file, &proc_pid_maps_op);
|
|
|
|
}
|
|
|
|
|
procfs: mark thread stack correctly in proc/<pid>/maps
Stack for a new thread is mapped by userspace code and passed via
sys_clone. This memory is currently seen as anonymous in
/proc/<pid>/maps, which makes it difficult to ascertain which mappings
are being used for thread stacks. This patch uses the individual task
stack pointers to determine which vmas are actually thread stacks.
For a multithreaded program like the following:
#include <pthread.h>
void *thread_main(void *foo)
{
while(1);
}
int main()
{
pthread_t t;
pthread_create(&t, NULL, thread_main, NULL);
pthread_join(t, NULL);
}
proc/PID/maps looks like the following:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
Here, one could guess that 7f8a44492000-7f8a44c92000 is a stack since
the earlier vma that has no permissions (7f8a44e3d000-7f8a4503d000) but
that is not always a reliable way to find out which vma is a thread
stack. Also, /proc/PID/maps and /proc/PID/task/TID/maps has the same
content.
With this patch in place, /proc/PID/task/TID/maps are treated as 'maps
as the task would see it' and hence, only the vma that that task uses as
stack is marked as [stack]. All other 'stack' vmas are marked as
anonymous memory. /proc/PID/maps acts as a thread group level view,
where all thread stack vmas are marked as [stack:TID] where TID is the
process ID of the task that uses that vma as stack, while the process
stack is marked as [stack].
So /proc/PID/maps will look like this:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack:1442]
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
Thus marking all vmas that are used as stacks by the threads in the
thread group along with the process stack. The task level maps will
however like this:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack]
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
where only the vma that is being used as a stack by *that* task is
marked as [stack].
Analogous changes have been made to /proc/PID/smaps,
/proc/PID/numa_maps, /proc/PID/task/TID/smaps and
/proc/PID/task/TID/numa_maps. Relevant snippets from smaps and
numa_maps:
[siddhesh@localhost ~ ]$ pgrep a.out
1441
[siddhesh@localhost ~ ]$ cat /proc/1441/smaps | grep "\[stack"
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack:1442]
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1442/smaps | grep "\[stack"
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1441/smaps | grep "\[stack"
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/numa_maps | grep "stack"
7f8a44492000 default stack:1442 anon=2 dirty=2 N0=2
7fff6273a000 default stack anon=3 dirty=3 N0=3
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1442/numa_maps | grep "stack"
7f8a44492000 default stack anon=2 dirty=2 N0=2
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1441/numa_maps | grep "stack"
7fff6273a000 default stack anon=3 dirty=3 N0=3
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix build]
Signed-off-by: Siddhesh Poyarekar <siddhesh.poyarekar@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jamie Lokier <jamie@shareable.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:04 +00:00
|
|
|
const struct file_operations proc_pid_maps_operations = {
|
|
|
|
.open = pid_maps_open,
|
|
|
|
.read = seq_read,
|
|
|
|
.llseek = seq_lseek,
|
2014-10-09 22:25:26 +00:00
|
|
|
.release = proc_map_release,
|
procfs: mark thread stack correctly in proc/<pid>/maps
Stack for a new thread is mapped by userspace code and passed via
sys_clone. This memory is currently seen as anonymous in
/proc/<pid>/maps, which makes it difficult to ascertain which mappings
are being used for thread stacks. This patch uses the individual task
stack pointers to determine which vmas are actually thread stacks.
For a multithreaded program like the following:
#include <pthread.h>
void *thread_main(void *foo)
{
while(1);
}
int main()
{
pthread_t t;
pthread_create(&t, NULL, thread_main, NULL);
pthread_join(t, NULL);
}
proc/PID/maps looks like the following:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
Here, one could guess that 7f8a44492000-7f8a44c92000 is a stack since
the earlier vma that has no permissions (7f8a44e3d000-7f8a4503d000) but
that is not always a reliable way to find out which vma is a thread
stack. Also, /proc/PID/maps and /proc/PID/task/TID/maps has the same
content.
With this patch in place, /proc/PID/task/TID/maps are treated as 'maps
as the task would see it' and hence, only the vma that that task uses as
stack is marked as [stack]. All other 'stack' vmas are marked as
anonymous memory. /proc/PID/maps acts as a thread group level view,
where all thread stack vmas are marked as [stack:TID] where TID is the
process ID of the task that uses that vma as stack, while the process
stack is marked as [stack].
So /proc/PID/maps will look like this:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack:1442]
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
Thus marking all vmas that are used as stacks by the threads in the
thread group along with the process stack. The task level maps will
however like this:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack]
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
where only the vma that is being used as a stack by *that* task is
marked as [stack].
Analogous changes have been made to /proc/PID/smaps,
/proc/PID/numa_maps, /proc/PID/task/TID/smaps and
/proc/PID/task/TID/numa_maps. Relevant snippets from smaps and
numa_maps:
[siddhesh@localhost ~ ]$ pgrep a.out
1441
[siddhesh@localhost ~ ]$ cat /proc/1441/smaps | grep "\[stack"
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack:1442]
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1442/smaps | grep "\[stack"
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1441/smaps | grep "\[stack"
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/numa_maps | grep "stack"
7f8a44492000 default stack:1442 anon=2 dirty=2 N0=2
7fff6273a000 default stack anon=3 dirty=3 N0=3
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1442/numa_maps | grep "stack"
7f8a44492000 default stack anon=2 dirty=2 N0=2
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1441/numa_maps | grep "stack"
7fff6273a000 default stack anon=3 dirty=3 N0=3
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix build]
Signed-off-by: Siddhesh Poyarekar <siddhesh.poyarekar@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jamie Lokier <jamie@shareable.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:04 +00:00
|
|
|
};
|
|
|
|
|
2008-02-05 06:29:03 +00:00
|
|
|
/*
|
|
|
|
* Proportional Set Size(PSS): my share of RSS.
|
|
|
|
*
|
|
|
|
* PSS of a process is the count of pages it has in memory, where each
|
|
|
|
* page is divided by the number of processes sharing it. So if a
|
|
|
|
* process has 1000 pages all to itself, and 1000 shared with one other
|
|
|
|
* process, its PSS will be 1500.
|
|
|
|
*
|
|
|
|
* To keep (accumulated) division errors low, we adopt a 64bit
|
|
|
|
* fixed-point pss counter to minimize division errors. So (pss >>
|
|
|
|
* PSS_SHIFT) would be the real byte count.
|
|
|
|
*
|
|
|
|
* A shift of 12 before division means (assuming 4K page size):
|
|
|
|
* - 1M 3-user-pages add up to 8KB errors;
|
|
|
|
* - supports mapcount up to 2^24, or 16M;
|
|
|
|
* - supports PSS up to 2^52 bytes, or 4PB.
|
|
|
|
*/
|
|
|
|
#define PSS_SHIFT 12
|
|
|
|
|
2008-02-05 06:29:07 +00:00
|
|
|
#ifdef CONFIG_PROC_PAGE_MONITOR
|
2008-04-28 09:12:55 +00:00
|
|
|
struct mem_size_stats {
|
2008-02-05 06:29:03 +00:00
|
|
|
unsigned long resident;
|
|
|
|
unsigned long shared_clean;
|
|
|
|
unsigned long shared_dirty;
|
|
|
|
unsigned long private_clean;
|
|
|
|
unsigned long private_dirty;
|
|
|
|
unsigned long referenced;
|
2010-10-27 22:34:10 +00:00
|
|
|
unsigned long anonymous;
|
2017-05-03 21:52:42 +00:00
|
|
|
unsigned long lazyfree;
|
2011-03-22 23:33:01 +00:00
|
|
|
unsigned long anonymous_thp;
|
2016-07-26 22:26:10 +00:00
|
|
|
unsigned long shmem_thp;
|
2019-09-23 22:37:54 +00:00
|
|
|
unsigned long file_thp;
|
2008-04-28 09:12:55 +00:00
|
|
|
unsigned long swap;
|
2015-11-06 02:47:11 +00:00
|
|
|
unsigned long shared_hugetlb;
|
|
|
|
unsigned long private_hugetlb;
|
2008-02-05 06:29:03 +00:00
|
|
|
u64 pss;
|
2019-07-12 04:00:10 +00:00
|
|
|
u64 pss_anon;
|
|
|
|
u64 pss_file;
|
|
|
|
u64 pss_shmem;
|
mm: add /proc/pid/smaps_rollup
/proc/pid/smaps_rollup is a new proc file that improves the performance
of user programs that determine aggregate memory statistics (e.g., total
PSS) of a process.
Android regularly "samples" the memory usage of various processes in
order to balance its memory pool sizes. This sampling process involves
opening /proc/pid/smaps and summing certain fields. For very large
processes, sampling memory use this way can take several hundred
milliseconds, due mostly to the overhead of the seq_printf calls in
task_mmu.c.
smaps_rollup improves the situation. It contains most of the fields of
/proc/pid/smaps, but instead of a set of fields for each VMA,
smaps_rollup instead contains one synthetic smaps-format entry
representing the whole process. In the single smaps_rollup synthetic
entry, each field is the summation of the corresponding field in all of
the real-smaps VMAs. Using a common format for smaps_rollup and smaps
allows userspace parsers to repurpose parsers meant for use with
non-rollup smaps for smaps_rollup, and it allows userspace to switch
between smaps_rollup and smaps at runtime (say, based on the
availability of smaps_rollup in a given kernel) with minimal fuss.
By using smaps_rollup instead of smaps, a caller can avoid the
significant overhead of formatting, reading, and parsing each of a large
process's potentially very numerous memory mappings. For sampling
system_server's PSS in Android, we measured a 12x speedup, representing
a savings of several hundred milliseconds.
One alternative to a new per-process proc file would have been including
PSS information in /proc/pid/status. We considered this option but
thought that PSS would be too expensive (by a few orders of magnitude)
to collect relative to what's already emitted as part of
/proc/pid/status, and slowing every user of /proc/pid/status for the
sake of readers that happen to want PSS feels wrong.
The code itself works by reusing the existing VMA-walking framework we
use for regular smaps generation and keeping the mem_size_stats
structure around between VMA walks instead of using a fresh one for each
VMA. In this way, summation happens automatically. We let seq_file
walk over the VMAs just as it does for regular smaps and just emit
nothing to the seq_file until we hit the last VMA.
Benchmarks:
using smaps:
iterations:1000 pid:1163 pss:220023808
0m29.46s real 0m08.28s user 0m20.98s system
using smaps_rollup:
iterations:1000 pid:1163 pss:220702720
0m04.39s real 0m00.03s user 0m04.31s system
We're using the PSS samples we collect asynchronously for
system-management tasks like fine-tuning oom_adj_score, memory use
tracking for debugging, application-level memory-use attribution, and
deciding whether we want to kill large processes during system idle
maintenance windows. Android has been using PSS for these purposes for
a long time; as the average process VMA count has increased and and
devices become more efficiency-conscious, PSS-collection inefficiency
has started to matter more. IMHO, it'd be a lot safer to optimize the
existing PSS-collection model, which has been fine-tuned over the years,
instead of changing the memory tracking approach entirely to work around
smaps-generation inefficiency.
Tim said:
: There are two main reasons why Android gathers PSS information:
:
: 1. Android devices can show the user the amount of memory used per
: application via the settings app. This is a less important use case.
:
: 2. We log PSS to help identify leaks in applications. We have found
: an enormous number of bugs (in the Android platform, in Google's own
: apps, and in third-party applications) using this data.
:
: To do this, system_server (the main process in Android userspace) will
: sample the PSS of a process three seconds after it changes state (for
: example, app is launched and becomes the foreground application) and about
: every ten minutes after that. The net result is that PSS collection is
: regularly running on at least one process in the system (usually a few
: times a minute while the screen is on, less when screen is off due to
: suspend). PSS of a process is an incredibly useful stat to track, and we
: aren't going to get rid of it. We've looked at some very hacky approaches
: using RSS ("take the RSS of the target process, subtract the RSS of the
: zygote process that is the parent of all Android apps") to reduce the
: accounting time, but it regularly overestimated the memory used by 20+
: percent. Accordingly, I don't think that there's a good alternative to
: using PSS.
:
: We started looking into PSS collection performance after we noticed random
: frequency spikes while a phone's screen was off; occasionally, one of the
: CPU clusters would ramp to a high frequency because there was 200-300ms of
: constant CPU work from a single thread in the main Android userspace
: process. The work causing the spike (which is reasonable governor
: behavior given the amount of CPU time needed) was always PSS collection.
: As a result, Android is burning more power than we should be on PSS
: collection.
:
: The other issue (and why I'm less sure about improving smaps as a
: long-term solution) is that the number of VMAs per process has increased
: significantly from release to release. After trying to figure out why we
: were seeing these 200-300ms PSS collection times on Android O but had not
: noticed it in previous versions, we found that the number of VMAs in the
: main system process increased by 50% from Android N to Android O (from
: ~1800 to ~2700) and varying increases in every userspace process. Android
: M to N also had an increase in the number of VMAs, although not as much.
: I'm not sure why this is increasing so much over time, but thinking about
: ASLR and ways to make ASLR better, I expect that this will continue to
: increase going forward. I would not be surprised if we hit 5000 VMAs on
: the main Android process (system_server) by 2020.
:
: If we assume that the number of VMAs is going to increase over time, then
: doing anything we can do to reduce the overhead of each VMA during PSS
: collection seems like the right way to go, and that means outputting an
: aggregate statistic (to avoid whatever overhead there is per line in
: writing smaps and in reading each line from userspace).
Link: http://lkml.kernel.org/r/20170812022148.178293-1-dancol@google.com
Signed-off-by: Daniel Colascione <dancol@google.com>
Cc: Tim Murray <timmurray@google.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:25:08 +00:00
|
|
|
u64 pss_locked;
|
2015-09-08 22:00:24 +00:00
|
|
|
u64 swap_pss;
|
mm, proc: account for shmem swap in /proc/pid/smaps
Currently, /proc/pid/smaps will always show "Swap: 0 kB" for
shmem-backed mappings, even if the mapped portion does contain pages
that were swapped out. This is because unlike private anonymous
mappings, shmem does not change pte to swap entry, but pte_none when
swapping the page out. In the smaps page walk, such page thus looks
like it was never faulted in.
This patch changes smaps_pte_entry() to determine the swap status for
such pte_none entries for shmem mappings, similarly to how
mincore_page() does it. Swapped out shmem pages are thus accounted for.
For private mappings of tmpfs files that COWed some of the pages, swaped
out status of the original shmem pages is naturally ignored. If some of
the private copies was also swapped out, they are accounted via their
page table swap entries, so the resulting reported swap usage is then a
sum of both swapped out private copies, and swapped out shmem pages that
were not COWed. No double accounting can thus happen.
The accounting is arguably still not as precise as for private anonymous
mappings, since now we will count also pages that the process in
question never accessed, but another process populated them and then let
them become swapped out. I believe it is still less confusing and
subtle than not showing any swap usage by shmem mappings at all.
Swapped out counter might of interest of users who would like to prevent
from future swapins during performance critical operation and pre-fault
them at their convenience. Especially for larger swapped out regions
the cost of swapin is much higher than a fresh page allocation. So a
differentiation between pte_none vs. swapped out is important for those
usecases.
One downside of this patch is that it makes /proc/pid/smaps more
expensive for shmem mappings, as we consult the radix tree for each
pte_none entry, so the overal complexity is O(n*log(n)). I have
measured this on a process that creates a 2GB mapping and dirties single
pages with a stride of 2MB, and time how long does it take to cat
/proc/pid/smaps of this process 100 times.
Private anonymous mapping:
real 0m0.949s
user 0m0.116s
sys 0m0.348s
Mapping of a /dev/shm/file:
real 0m3.831s
user 0m0.180s
sys 0m3.212s
The difference is rather substantial, so the next patch will reduce the
cost for shared or read-only mappings.
In a less controlled experiment, I've gathered pids of processes on my
desktop that have either '/dev/shm/*' or 'SYSV*' in smaps. This
included the Chrome browser and some KDE processes. Again, I've run cat
/proc/pid/smaps on each 100 times.
Before this patch:
real 0m9.050s
user 0m0.518s
sys 0m8.066s
After this patch:
real 0m9.221s
user 0m0.541s
sys 0m8.187s
This suggests low impact on average systems.
Note that this patch doesn't attempt to adjust the SwapPss field for
shmem mappings, which would need extra work to determine who else could
have the pages mapped. Thus the value stays zero except for COWed
swapped out pages in a shmem mapping, which are accounted as usual.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Jerome Marchand <jmarchan@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14 23:19:17 +00:00
|
|
|
bool check_shmem_swap;
|
2008-02-05 06:29:03 +00:00
|
|
|
};
|
|
|
|
|
2019-07-12 04:00:10 +00:00
|
|
|
static void smaps_page_accumulate(struct mem_size_stats *mss,
|
|
|
|
struct page *page, unsigned long size, unsigned long pss,
|
|
|
|
bool dirty, bool locked, bool private)
|
|
|
|
{
|
|
|
|
mss->pss += pss;
|
|
|
|
|
|
|
|
if (PageAnon(page))
|
|
|
|
mss->pss_anon += pss;
|
|
|
|
else if (PageSwapBacked(page))
|
|
|
|
mss->pss_shmem += pss;
|
|
|
|
else
|
|
|
|
mss->pss_file += pss;
|
|
|
|
|
|
|
|
if (locked)
|
|
|
|
mss->pss_locked += pss;
|
|
|
|
|
|
|
|
if (dirty || PageDirty(page)) {
|
|
|
|
if (private)
|
|
|
|
mss->private_dirty += size;
|
|
|
|
else
|
|
|
|
mss->shared_dirty += size;
|
|
|
|
} else {
|
|
|
|
if (private)
|
|
|
|
mss->private_clean += size;
|
|
|
|
else
|
|
|
|
mss->shared_clean += size;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2014-12-10 23:44:36 +00:00
|
|
|
static void smaps_account(struct mem_size_stats *mss, struct page *page,
|
2019-02-12 23:36:11 +00:00
|
|
|
bool compound, bool young, bool dirty, bool locked)
|
2014-12-10 23:44:36 +00:00
|
|
|
{
|
2019-09-23 22:34:30 +00:00
|
|
|
int i, nr = compound ? compound_nr(page) : 1;
|
2016-01-16 00:52:13 +00:00
|
|
|
unsigned long size = nr * PAGE_SIZE;
|
2014-12-10 23:44:36 +00:00
|
|
|
|
2019-07-12 04:00:10 +00:00
|
|
|
/*
|
|
|
|
* First accumulate quantities that depend only on |size| and the type
|
|
|
|
* of the compound page.
|
|
|
|
*/
|
2017-05-03 21:52:42 +00:00
|
|
|
if (PageAnon(page)) {
|
2014-12-10 23:44:36 +00:00
|
|
|
mss->anonymous += size;
|
2017-05-03 21:52:42 +00:00
|
|
|
if (!PageSwapBacked(page) && !dirty && !PageDirty(page))
|
|
|
|
mss->lazyfree += size;
|
|
|
|
}
|
2014-12-10 23:44:36 +00:00
|
|
|
|
|
|
|
mss->resident += size;
|
|
|
|
/* Accumulate the size in pages that have been accessed. */
|
mm: introduce idle page tracking
Knowing the portion of memory that is not used by a certain application or
memory cgroup (idle memory) can be useful for partitioning the system
efficiently, e.g. by setting memory cgroup limits appropriately.
Currently, the only means to estimate the amount of idle memory provided
by the kernel is /proc/PID/{clear_refs,smaps}: the user can clear the
access bit for all pages mapped to a particular process by writing 1 to
clear_refs, wait for some time, and then count smaps:Referenced. However,
this method has two serious shortcomings:
- it does not count unmapped file pages
- it affects the reclaimer logic
To overcome these drawbacks, this patch introduces two new page flags,
Idle and Young, and a new sysfs file, /sys/kernel/mm/page_idle/bitmap.
A page's Idle flag can only be set from userspace by setting bit in
/sys/kernel/mm/page_idle/bitmap at the offset corresponding to the page,
and it is cleared whenever the page is accessed either through page tables
(it is cleared in page_referenced() in this case) or using the read(2)
system call (mark_page_accessed()). Thus by setting the Idle flag for
pages of a particular workload, which can be found e.g. by reading
/proc/PID/pagemap, waiting for some time to let the workload access its
working set, and then reading the bitmap file, one can estimate the amount
of pages that are not used by the workload.
The Young page flag is used to avoid interference with the memory
reclaimer. A page's Young flag is set whenever the Access bit of a page
table entry pointing to the page is cleared by writing to the bitmap file.
If page_referenced() is called on a Young page, it will add 1 to its
return value, therefore concealing the fact that the Access bit was
cleared.
Note, since there is no room for extra page flags on 32 bit, this feature
uses extended page flags when compiled on 32 bit.
[akpm@linux-foundation.org: fix build]
[akpm@linux-foundation.org: kpageidle requires an MMU]
[akpm@linux-foundation.org: decouple from page-flags rework]
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Reviewed-by: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Greg Thelen <gthelen@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-09 22:35:45 +00:00
|
|
|
if (young || page_is_young(page) || PageReferenced(page))
|
2014-12-10 23:44:36 +00:00
|
|
|
mss->referenced += size;
|
|
|
|
|
2016-01-16 00:52:13 +00:00
|
|
|
/*
|
2019-07-12 04:00:10 +00:00
|
|
|
* Then accumulate quantities that may depend on sharing, or that may
|
|
|
|
* differ page-by-page.
|
|
|
|
*
|
2016-01-16 00:52:13 +00:00
|
|
|
* page_count(page) == 1 guarantees the page is mapped exactly once.
|
|
|
|
* If any subpage of the compound page mapped with PTE it would elevate
|
|
|
|
* page_count().
|
|
|
|
*/
|
|
|
|
if (page_count(page) == 1) {
|
2019-07-12 04:00:10 +00:00
|
|
|
smaps_page_accumulate(mss, page, size, size << PSS_SHIFT, dirty,
|
|
|
|
locked, true);
|
2016-01-16 00:52:13 +00:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
for (i = 0; i < nr; i++, page++) {
|
|
|
|
int mapcount = page_mapcount(page);
|
2019-07-12 04:00:10 +00:00
|
|
|
unsigned long pss = PAGE_SIZE << PSS_SHIFT;
|
|
|
|
if (mapcount >= 2)
|
|
|
|
pss /= mapcount;
|
|
|
|
smaps_page_accumulate(mss, page, PAGE_SIZE, pss, dirty, locked,
|
|
|
|
mapcount < 2);
|
2014-12-10 23:44:36 +00:00
|
|
|
}
|
|
|
|
}
|
2011-03-22 23:32:58 +00:00
|
|
|
|
mm, proc: account for shmem swap in /proc/pid/smaps
Currently, /proc/pid/smaps will always show "Swap: 0 kB" for
shmem-backed mappings, even if the mapped portion does contain pages
that were swapped out. This is because unlike private anonymous
mappings, shmem does not change pte to swap entry, but pte_none when
swapping the page out. In the smaps page walk, such page thus looks
like it was never faulted in.
This patch changes smaps_pte_entry() to determine the swap status for
such pte_none entries for shmem mappings, similarly to how
mincore_page() does it. Swapped out shmem pages are thus accounted for.
For private mappings of tmpfs files that COWed some of the pages, swaped
out status of the original shmem pages is naturally ignored. If some of
the private copies was also swapped out, they are accounted via their
page table swap entries, so the resulting reported swap usage is then a
sum of both swapped out private copies, and swapped out shmem pages that
were not COWed. No double accounting can thus happen.
The accounting is arguably still not as precise as for private anonymous
mappings, since now we will count also pages that the process in
question never accessed, but another process populated them and then let
them become swapped out. I believe it is still less confusing and
subtle than not showing any swap usage by shmem mappings at all.
Swapped out counter might of interest of users who would like to prevent
from future swapins during performance critical operation and pre-fault
them at their convenience. Especially for larger swapped out regions
the cost of swapin is much higher than a fresh page allocation. So a
differentiation between pte_none vs. swapped out is important for those
usecases.
One downside of this patch is that it makes /proc/pid/smaps more
expensive for shmem mappings, as we consult the radix tree for each
pte_none entry, so the overal complexity is O(n*log(n)). I have
measured this on a process that creates a 2GB mapping and dirties single
pages with a stride of 2MB, and time how long does it take to cat
/proc/pid/smaps of this process 100 times.
Private anonymous mapping:
real 0m0.949s
user 0m0.116s
sys 0m0.348s
Mapping of a /dev/shm/file:
real 0m3.831s
user 0m0.180s
sys 0m3.212s
The difference is rather substantial, so the next patch will reduce the
cost for shared or read-only mappings.
In a less controlled experiment, I've gathered pids of processes on my
desktop that have either '/dev/shm/*' or 'SYSV*' in smaps. This
included the Chrome browser and some KDE processes. Again, I've run cat
/proc/pid/smaps on each 100 times.
Before this patch:
real 0m9.050s
user 0m0.518s
sys 0m8.066s
After this patch:
real 0m9.221s
user 0m0.541s
sys 0m8.187s
This suggests low impact on average systems.
Note that this patch doesn't attempt to adjust the SwapPss field for
shmem mappings, which would need extra work to determine who else could
have the pages mapped. Thus the value stays zero except for COWed
swapped out pages in a shmem mapping, which are accounted as usual.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Jerome Marchand <jmarchan@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14 23:19:17 +00:00
|
|
|
#ifdef CONFIG_SHMEM
|
|
|
|
static int smaps_pte_hole(unsigned long addr, unsigned long end,
|
2020-02-04 01:36:03 +00:00
|
|
|
__always_unused int depth, struct mm_walk *walk)
|
mm, proc: account for shmem swap in /proc/pid/smaps
Currently, /proc/pid/smaps will always show "Swap: 0 kB" for
shmem-backed mappings, even if the mapped portion does contain pages
that were swapped out. This is because unlike private anonymous
mappings, shmem does not change pte to swap entry, but pte_none when
swapping the page out. In the smaps page walk, such page thus looks
like it was never faulted in.
This patch changes smaps_pte_entry() to determine the swap status for
such pte_none entries for shmem mappings, similarly to how
mincore_page() does it. Swapped out shmem pages are thus accounted for.
For private mappings of tmpfs files that COWed some of the pages, swaped
out status of the original shmem pages is naturally ignored. If some of
the private copies was also swapped out, they are accounted via their
page table swap entries, so the resulting reported swap usage is then a
sum of both swapped out private copies, and swapped out shmem pages that
were not COWed. No double accounting can thus happen.
The accounting is arguably still not as precise as for private anonymous
mappings, since now we will count also pages that the process in
question never accessed, but another process populated them and then let
them become swapped out. I believe it is still less confusing and
subtle than not showing any swap usage by shmem mappings at all.
Swapped out counter might of interest of users who would like to prevent
from future swapins during performance critical operation and pre-fault
them at their convenience. Especially for larger swapped out regions
the cost of swapin is much higher than a fresh page allocation. So a
differentiation between pte_none vs. swapped out is important for those
usecases.
One downside of this patch is that it makes /proc/pid/smaps more
expensive for shmem mappings, as we consult the radix tree for each
pte_none entry, so the overal complexity is O(n*log(n)). I have
measured this on a process that creates a 2GB mapping and dirties single
pages with a stride of 2MB, and time how long does it take to cat
/proc/pid/smaps of this process 100 times.
Private anonymous mapping:
real 0m0.949s
user 0m0.116s
sys 0m0.348s
Mapping of a /dev/shm/file:
real 0m3.831s
user 0m0.180s
sys 0m3.212s
The difference is rather substantial, so the next patch will reduce the
cost for shared or read-only mappings.
In a less controlled experiment, I've gathered pids of processes on my
desktop that have either '/dev/shm/*' or 'SYSV*' in smaps. This
included the Chrome browser and some KDE processes. Again, I've run cat
/proc/pid/smaps on each 100 times.
Before this patch:
real 0m9.050s
user 0m0.518s
sys 0m8.066s
After this patch:
real 0m9.221s
user 0m0.541s
sys 0m8.187s
This suggests low impact on average systems.
Note that this patch doesn't attempt to adjust the SwapPss field for
shmem mappings, which would need extra work to determine who else could
have the pages mapped. Thus the value stays zero except for COWed
swapped out pages in a shmem mapping, which are accounted as usual.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Jerome Marchand <jmarchan@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14 23:19:17 +00:00
|
|
|
{
|
|
|
|
struct mem_size_stats *mss = walk->private;
|
|
|
|
|
2016-01-14 23:19:23 +00:00
|
|
|
mss->swap += shmem_partial_swap_usage(
|
|
|
|
walk->vma->vm_file->f_mapping, addr, end);
|
mm, proc: account for shmem swap in /proc/pid/smaps
Currently, /proc/pid/smaps will always show "Swap: 0 kB" for
shmem-backed mappings, even if the mapped portion does contain pages
that were swapped out. This is because unlike private anonymous
mappings, shmem does not change pte to swap entry, but pte_none when
swapping the page out. In the smaps page walk, such page thus looks
like it was never faulted in.
This patch changes smaps_pte_entry() to determine the swap status for
such pte_none entries for shmem mappings, similarly to how
mincore_page() does it. Swapped out shmem pages are thus accounted for.
For private mappings of tmpfs files that COWed some of the pages, swaped
out status of the original shmem pages is naturally ignored. If some of
the private copies was also swapped out, they are accounted via their
page table swap entries, so the resulting reported swap usage is then a
sum of both swapped out private copies, and swapped out shmem pages that
were not COWed. No double accounting can thus happen.
The accounting is arguably still not as precise as for private anonymous
mappings, since now we will count also pages that the process in
question never accessed, but another process populated them and then let
them become swapped out. I believe it is still less confusing and
subtle than not showing any swap usage by shmem mappings at all.
Swapped out counter might of interest of users who would like to prevent
from future swapins during performance critical operation and pre-fault
them at their convenience. Especially for larger swapped out regions
the cost of swapin is much higher than a fresh page allocation. So a
differentiation between pte_none vs. swapped out is important for those
usecases.
One downside of this patch is that it makes /proc/pid/smaps more
expensive for shmem mappings, as we consult the radix tree for each
pte_none entry, so the overal complexity is O(n*log(n)). I have
measured this on a process that creates a 2GB mapping and dirties single
pages with a stride of 2MB, and time how long does it take to cat
/proc/pid/smaps of this process 100 times.
Private anonymous mapping:
real 0m0.949s
user 0m0.116s
sys 0m0.348s
Mapping of a /dev/shm/file:
real 0m3.831s
user 0m0.180s
sys 0m3.212s
The difference is rather substantial, so the next patch will reduce the
cost for shared or read-only mappings.
In a less controlled experiment, I've gathered pids of processes on my
desktop that have either '/dev/shm/*' or 'SYSV*' in smaps. This
included the Chrome browser and some KDE processes. Again, I've run cat
/proc/pid/smaps on each 100 times.
Before this patch:
real 0m9.050s
user 0m0.518s
sys 0m8.066s
After this patch:
real 0m9.221s
user 0m0.541s
sys 0m8.187s
This suggests low impact on average systems.
Note that this patch doesn't attempt to adjust the SwapPss field for
shmem mappings, which would need extra work to determine who else could
have the pages mapped. Thus the value stays zero except for COWed
swapped out pages in a shmem mapping, which are accounted as usual.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Jerome Marchand <jmarchan@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14 23:19:17 +00:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
2019-08-28 14:19:54 +00:00
|
|
|
#else
|
|
|
|
#define smaps_pte_hole NULL
|
|
|
|
#endif /* CONFIG_SHMEM */
|
mm, proc: account for shmem swap in /proc/pid/smaps
Currently, /proc/pid/smaps will always show "Swap: 0 kB" for
shmem-backed mappings, even if the mapped portion does contain pages
that were swapped out. This is because unlike private anonymous
mappings, shmem does not change pte to swap entry, but pte_none when
swapping the page out. In the smaps page walk, such page thus looks
like it was never faulted in.
This patch changes smaps_pte_entry() to determine the swap status for
such pte_none entries for shmem mappings, similarly to how
mincore_page() does it. Swapped out shmem pages are thus accounted for.
For private mappings of tmpfs files that COWed some of the pages, swaped
out status of the original shmem pages is naturally ignored. If some of
the private copies was also swapped out, they are accounted via their
page table swap entries, so the resulting reported swap usage is then a
sum of both swapped out private copies, and swapped out shmem pages that
were not COWed. No double accounting can thus happen.
The accounting is arguably still not as precise as for private anonymous
mappings, since now we will count also pages that the process in
question never accessed, but another process populated them and then let
them become swapped out. I believe it is still less confusing and
subtle than not showing any swap usage by shmem mappings at all.
Swapped out counter might of interest of users who would like to prevent
from future swapins during performance critical operation and pre-fault
them at their convenience. Especially for larger swapped out regions
the cost of swapin is much higher than a fresh page allocation. So a
differentiation between pte_none vs. swapped out is important for those
usecases.
One downside of this patch is that it makes /proc/pid/smaps more
expensive for shmem mappings, as we consult the radix tree for each
pte_none entry, so the overal complexity is O(n*log(n)). I have
measured this on a process that creates a 2GB mapping and dirties single
pages with a stride of 2MB, and time how long does it take to cat
/proc/pid/smaps of this process 100 times.
Private anonymous mapping:
real 0m0.949s
user 0m0.116s
sys 0m0.348s
Mapping of a /dev/shm/file:
real 0m3.831s
user 0m0.180s
sys 0m3.212s
The difference is rather substantial, so the next patch will reduce the
cost for shared or read-only mappings.
In a less controlled experiment, I've gathered pids of processes on my
desktop that have either '/dev/shm/*' or 'SYSV*' in smaps. This
included the Chrome browser and some KDE processes. Again, I've run cat
/proc/pid/smaps on each 100 times.
Before this patch:
real 0m9.050s
user 0m0.518s
sys 0m8.066s
After this patch:
real 0m9.221s
user 0m0.541s
sys 0m8.187s
This suggests low impact on average systems.
Note that this patch doesn't attempt to adjust the SwapPss field for
shmem mappings, which would need extra work to determine who else could
have the pages mapped. Thus the value stays zero except for COWed
swapped out pages in a shmem mapping, which are accounted as usual.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Jerome Marchand <jmarchan@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14 23:19:17 +00:00
|
|
|
|
2014-12-10 23:44:36 +00:00
|
|
|
static void smaps_pte_entry(pte_t *pte, unsigned long addr,
|
|
|
|
struct mm_walk *walk)
|
2011-03-22 23:32:58 +00:00
|
|
|
{
|
|
|
|
struct mem_size_stats *mss = walk->private;
|
2015-02-11 23:27:43 +00:00
|
|
|
struct vm_area_struct *vma = walk->vma;
|
2019-02-12 23:36:11 +00:00
|
|
|
bool locked = !!(vma->vm_flags & VM_LOCKED);
|
2012-05-31 23:26:20 +00:00
|
|
|
struct page *page = NULL;
|
2011-03-22 23:32:58 +00:00
|
|
|
|
2014-12-10 23:44:36 +00:00
|
|
|
if (pte_present(*pte)) {
|
|
|
|
page = vm_normal_page(vma, addr, *pte);
|
|
|
|
} else if (is_swap_pte(*pte)) {
|
|
|
|
swp_entry_t swpent = pte_to_swp_entry(*pte);
|
2011-03-22 23:32:58 +00:00
|
|
|
|
2015-09-08 22:00:24 +00:00
|
|
|
if (!non_swap_entry(swpent)) {
|
|
|
|
int mapcount;
|
|
|
|
|
2014-12-10 23:44:36 +00:00
|
|
|
mss->swap += PAGE_SIZE;
|
2015-09-08 22:00:24 +00:00
|
|
|
mapcount = swp_swapcount(swpent);
|
|
|
|
if (mapcount >= 2) {
|
|
|
|
u64 pss_delta = (u64)PAGE_SIZE << PSS_SHIFT;
|
|
|
|
|
|
|
|
do_div(pss_delta, mapcount);
|
|
|
|
mss->swap_pss += pss_delta;
|
|
|
|
} else {
|
|
|
|
mss->swap_pss += (u64)PAGE_SIZE << PSS_SHIFT;
|
|
|
|
}
|
|
|
|
} else if (is_migration_entry(swpent))
|
2012-05-31 23:26:20 +00:00
|
|
|
page = migration_entry_to_page(swpent);
|
2017-09-08 23:11:43 +00:00
|
|
|
else if (is_device_private_entry(swpent))
|
|
|
|
page = device_private_entry_to_page(swpent);
|
mm, proc: account for shmem swap in /proc/pid/smaps
Currently, /proc/pid/smaps will always show "Swap: 0 kB" for
shmem-backed mappings, even if the mapped portion does contain pages
that were swapped out. This is because unlike private anonymous
mappings, shmem does not change pte to swap entry, but pte_none when
swapping the page out. In the smaps page walk, such page thus looks
like it was never faulted in.
This patch changes smaps_pte_entry() to determine the swap status for
such pte_none entries for shmem mappings, similarly to how
mincore_page() does it. Swapped out shmem pages are thus accounted for.
For private mappings of tmpfs files that COWed some of the pages, swaped
out status of the original shmem pages is naturally ignored. If some of
the private copies was also swapped out, they are accounted via their
page table swap entries, so the resulting reported swap usage is then a
sum of both swapped out private copies, and swapped out shmem pages that
were not COWed. No double accounting can thus happen.
The accounting is arguably still not as precise as for private anonymous
mappings, since now we will count also pages that the process in
question never accessed, but another process populated them and then let
them become swapped out. I believe it is still less confusing and
subtle than not showing any swap usage by shmem mappings at all.
Swapped out counter might of interest of users who would like to prevent
from future swapins during performance critical operation and pre-fault
them at their convenience. Especially for larger swapped out regions
the cost of swapin is much higher than a fresh page allocation. So a
differentiation between pte_none vs. swapped out is important for those
usecases.
One downside of this patch is that it makes /proc/pid/smaps more
expensive for shmem mappings, as we consult the radix tree for each
pte_none entry, so the overal complexity is O(n*log(n)). I have
measured this on a process that creates a 2GB mapping and dirties single
pages with a stride of 2MB, and time how long does it take to cat
/proc/pid/smaps of this process 100 times.
Private anonymous mapping:
real 0m0.949s
user 0m0.116s
sys 0m0.348s
Mapping of a /dev/shm/file:
real 0m3.831s
user 0m0.180s
sys 0m3.212s
The difference is rather substantial, so the next patch will reduce the
cost for shared or read-only mappings.
In a less controlled experiment, I've gathered pids of processes on my
desktop that have either '/dev/shm/*' or 'SYSV*' in smaps. This
included the Chrome browser and some KDE processes. Again, I've run cat
/proc/pid/smaps on each 100 times.
Before this patch:
real 0m9.050s
user 0m0.518s
sys 0m8.066s
After this patch:
real 0m9.221s
user 0m0.541s
sys 0m8.187s
This suggests low impact on average systems.
Note that this patch doesn't attempt to adjust the SwapPss field for
shmem mappings, which would need extra work to determine who else could
have the pages mapped. Thus the value stays zero except for COWed
swapped out pages in a shmem mapping, which are accounted as usual.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Jerome Marchand <jmarchan@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14 23:19:17 +00:00
|
|
|
} else if (unlikely(IS_ENABLED(CONFIG_SHMEM) && mss->check_shmem_swap
|
|
|
|
&& pte_none(*pte))) {
|
2020-10-13 23:51:28 +00:00
|
|
|
page = xa_load(&vma->vm_file->f_mapping->i_pages,
|
2016-01-14 23:19:23 +00:00
|
|
|
linear_page_index(vma, addr));
|
2017-11-03 17:30:42 +00:00
|
|
|
if (xa_is_value(page))
|
2016-01-14 23:19:23 +00:00
|
|
|
mss->swap += PAGE_SIZE;
|
|
|
|
return;
|
2012-05-31 23:26:20 +00:00
|
|
|
}
|
2011-03-22 23:32:58 +00:00
|
|
|
|
|
|
|
if (!page)
|
|
|
|
return;
|
2016-01-16 00:52:13 +00:00
|
|
|
|
2019-02-12 23:36:11 +00:00
|
|
|
smaps_account(mss, page, false, pte_young(*pte), pte_dirty(*pte), locked);
|
2011-03-22 23:32:58 +00:00
|
|
|
}
|
|
|
|
|
2014-12-10 23:44:36 +00:00
|
|
|
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
|
|
|
|
static void smaps_pmd_entry(pmd_t *pmd, unsigned long addr,
|
|
|
|
struct mm_walk *walk)
|
|
|
|
{
|
|
|
|
struct mem_size_stats *mss = walk->private;
|
2015-02-11 23:27:43 +00:00
|
|
|
struct vm_area_struct *vma = walk->vma;
|
2019-02-12 23:36:11 +00:00
|
|
|
bool locked = !!(vma->vm_flags & VM_LOCKED);
|
/proc/PID/smaps: Add PMD migration entry parsing
Now, when reading /proc/PID/smaps, the PMD migration entry in page table
is simply ignored. To improve the accuracy of /proc/PID/smaps, its
parsing and processing is added.
To test the patch, we run pmbench to eat 400 MB memory in background,
then run /usr/bin/migratepages and `cat /proc/PID/smaps` every second.
The issue as follows can be reproduced within 60 seconds.
Before the patch, for the fully populated 400 MB anonymous VMA, some THP
pages under migration may be lost as below.
7f3f6a7e5000-7f3f837e5000 rw-p 00000000 00:00 0
Size: 409600 kB
KernelPageSize: 4 kB
MMUPageSize: 4 kB
Rss: 407552 kB
Pss: 407552 kB
Shared_Clean: 0 kB
Shared_Dirty: 0 kB
Private_Clean: 0 kB
Private_Dirty: 407552 kB
Referenced: 301056 kB
Anonymous: 407552 kB
LazyFree: 0 kB
AnonHugePages: 405504 kB
ShmemPmdMapped: 0 kB
FilePmdMapped: 0 kB
Shared_Hugetlb: 0 kB
Private_Hugetlb: 0 kB
Swap: 0 kB
SwapPss: 0 kB
Locked: 0 kB
THPeligible: 1
VmFlags: rd wr mr mw me ac
After the patch, it will be always,
7f3f6a7e5000-7f3f837e5000 rw-p 00000000 00:00 0
Size: 409600 kB
KernelPageSize: 4 kB
MMUPageSize: 4 kB
Rss: 409600 kB
Pss: 409600 kB
Shared_Clean: 0 kB
Shared_Dirty: 0 kB
Private_Clean: 0 kB
Private_Dirty: 409600 kB
Referenced: 294912 kB
Anonymous: 409600 kB
LazyFree: 0 kB
AnonHugePages: 407552 kB
ShmemPmdMapped: 0 kB
FilePmdMapped: 0 kB
Shared_Hugetlb: 0 kB
Private_Hugetlb: 0 kB
Swap: 0 kB
SwapPss: 0 kB
Locked: 0 kB
THPeligible: 1
VmFlags: rd wr mr mw me ac
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Link: http://lkml.kernel.org/r/20200403123059.1846960-1-ying.huang@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02 04:50:05 +00:00
|
|
|
struct page *page = NULL;
|
|
|
|
|
|
|
|
if (pmd_present(*pmd)) {
|
|
|
|
/* FOLL_DUMP will return -EFAULT on huge zero page */
|
|
|
|
page = follow_trans_huge_pmd(vma, addr, pmd, FOLL_DUMP);
|
|
|
|
} else if (unlikely(thp_migration_supported() && is_swap_pmd(*pmd))) {
|
|
|
|
swp_entry_t entry = pmd_to_swp_entry(*pmd);
|
2014-12-10 23:44:36 +00:00
|
|
|
|
/proc/PID/smaps: Add PMD migration entry parsing
Now, when reading /proc/PID/smaps, the PMD migration entry in page table
is simply ignored. To improve the accuracy of /proc/PID/smaps, its
parsing and processing is added.
To test the patch, we run pmbench to eat 400 MB memory in background,
then run /usr/bin/migratepages and `cat /proc/PID/smaps` every second.
The issue as follows can be reproduced within 60 seconds.
Before the patch, for the fully populated 400 MB anonymous VMA, some THP
pages under migration may be lost as below.
7f3f6a7e5000-7f3f837e5000 rw-p 00000000 00:00 0
Size: 409600 kB
KernelPageSize: 4 kB
MMUPageSize: 4 kB
Rss: 407552 kB
Pss: 407552 kB
Shared_Clean: 0 kB
Shared_Dirty: 0 kB
Private_Clean: 0 kB
Private_Dirty: 407552 kB
Referenced: 301056 kB
Anonymous: 407552 kB
LazyFree: 0 kB
AnonHugePages: 405504 kB
ShmemPmdMapped: 0 kB
FilePmdMapped: 0 kB
Shared_Hugetlb: 0 kB
Private_Hugetlb: 0 kB
Swap: 0 kB
SwapPss: 0 kB
Locked: 0 kB
THPeligible: 1
VmFlags: rd wr mr mw me ac
After the patch, it will be always,
7f3f6a7e5000-7f3f837e5000 rw-p 00000000 00:00 0
Size: 409600 kB
KernelPageSize: 4 kB
MMUPageSize: 4 kB
Rss: 409600 kB
Pss: 409600 kB
Shared_Clean: 0 kB
Shared_Dirty: 0 kB
Private_Clean: 0 kB
Private_Dirty: 409600 kB
Referenced: 294912 kB
Anonymous: 409600 kB
LazyFree: 0 kB
AnonHugePages: 407552 kB
ShmemPmdMapped: 0 kB
FilePmdMapped: 0 kB
Shared_Hugetlb: 0 kB
Private_Hugetlb: 0 kB
Swap: 0 kB
SwapPss: 0 kB
Locked: 0 kB
THPeligible: 1
VmFlags: rd wr mr mw me ac
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Link: http://lkml.kernel.org/r/20200403123059.1846960-1-ying.huang@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02 04:50:05 +00:00
|
|
|
if (is_migration_entry(entry))
|
|
|
|
page = migration_entry_to_page(entry);
|
|
|
|
}
|
2014-12-10 23:44:36 +00:00
|
|
|
if (IS_ERR_OR_NULL(page))
|
|
|
|
return;
|
2016-07-26 22:26:10 +00:00
|
|
|
if (PageAnon(page))
|
|
|
|
mss->anonymous_thp += HPAGE_PMD_SIZE;
|
|
|
|
else if (PageSwapBacked(page))
|
|
|
|
mss->shmem_thp += HPAGE_PMD_SIZE;
|
2016-09-03 17:38:03 +00:00
|
|
|
else if (is_zone_device_page(page))
|
|
|
|
/* pass */;
|
2016-07-26 22:26:10 +00:00
|
|
|
else
|
2019-09-23 22:37:54 +00:00
|
|
|
mss->file_thp += HPAGE_PMD_SIZE;
|
2019-02-12 23:36:11 +00:00
|
|
|
smaps_account(mss, page, true, pmd_young(*pmd), pmd_dirty(*pmd), locked);
|
2014-12-10 23:44:36 +00:00
|
|
|
}
|
|
|
|
#else
|
|
|
|
static void smaps_pmd_entry(pmd_t *pmd, unsigned long addr,
|
|
|
|
struct mm_walk *walk)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2008-02-05 06:29:01 +00:00
|
|
|
static int smaps_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end,
|
2008-06-12 22:21:47 +00:00
|
|
|
struct mm_walk *walk)
|
2005-09-03 22:55:10 +00:00
|
|
|
{
|
2015-02-11 23:27:43 +00:00
|
|
|
struct vm_area_struct *vma = walk->vma;
|
2011-03-22 23:32:58 +00:00
|
|
|
pte_t *pte;
|
2005-10-30 01:16:27 +00:00
|
|
|
spinlock_t *ptl;
|
2005-09-03 22:55:10 +00:00
|
|
|
|
2016-01-22 00:40:25 +00:00
|
|
|
ptl = pmd_trans_huge_lock(pmd, vma);
|
|
|
|
if (ptl) {
|
/proc/PID/smaps: Add PMD migration entry parsing
Now, when reading /proc/PID/smaps, the PMD migration entry in page table
is simply ignored. To improve the accuracy of /proc/PID/smaps, its
parsing and processing is added.
To test the patch, we run pmbench to eat 400 MB memory in background,
then run /usr/bin/migratepages and `cat /proc/PID/smaps` every second.
The issue as follows can be reproduced within 60 seconds.
Before the patch, for the fully populated 400 MB anonymous VMA, some THP
pages under migration may be lost as below.
7f3f6a7e5000-7f3f837e5000 rw-p 00000000 00:00 0
Size: 409600 kB
KernelPageSize: 4 kB
MMUPageSize: 4 kB
Rss: 407552 kB
Pss: 407552 kB
Shared_Clean: 0 kB
Shared_Dirty: 0 kB
Private_Clean: 0 kB
Private_Dirty: 407552 kB
Referenced: 301056 kB
Anonymous: 407552 kB
LazyFree: 0 kB
AnonHugePages: 405504 kB
ShmemPmdMapped: 0 kB
FilePmdMapped: 0 kB
Shared_Hugetlb: 0 kB
Private_Hugetlb: 0 kB
Swap: 0 kB
SwapPss: 0 kB
Locked: 0 kB
THPeligible: 1
VmFlags: rd wr mr mw me ac
After the patch, it will be always,
7f3f6a7e5000-7f3f837e5000 rw-p 00000000 00:00 0
Size: 409600 kB
KernelPageSize: 4 kB
MMUPageSize: 4 kB
Rss: 409600 kB
Pss: 409600 kB
Shared_Clean: 0 kB
Shared_Dirty: 0 kB
Private_Clean: 0 kB
Private_Dirty: 409600 kB
Referenced: 294912 kB
Anonymous: 409600 kB
LazyFree: 0 kB
AnonHugePages: 407552 kB
ShmemPmdMapped: 0 kB
FilePmdMapped: 0 kB
Shared_Hugetlb: 0 kB
Private_Hugetlb: 0 kB
Swap: 0 kB
SwapPss: 0 kB
Locked: 0 kB
THPeligible: 1
VmFlags: rd wr mr mw me ac
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Link: http://lkml.kernel.org/r/20200403123059.1846960-1-ying.huang@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02 04:50:05 +00:00
|
|
|
smaps_pmd_entry(pmd, addr, walk);
|
2013-11-14 22:30:54 +00:00
|
|
|
spin_unlock(ptl);
|
2017-09-08 23:13:41 +00:00
|
|
|
goto out;
|
2011-03-22 23:33:00 +00:00
|
|
|
}
|
mm: thp: fix pmd_bad() triggering in code paths holding mmap_sem read mode
In some cases it may happen that pmd_none_or_clear_bad() is called with
the mmap_sem hold in read mode. In those cases the huge page faults can
allocate hugepmds under pmd_none_or_clear_bad() and that can trigger a
false positive from pmd_bad() that will not like to see a pmd
materializing as trans huge.
It's not khugepaged causing the problem, khugepaged holds the mmap_sem
in write mode (and all those sites must hold the mmap_sem in read mode
to prevent pagetables to go away from under them, during code review it
seems vm86 mode on 32bit kernels requires that too unless it's
restricted to 1 thread per process or UP builds). The race is only with
the huge pagefaults that can convert a pmd_none() into a
pmd_trans_huge().
Effectively all these pmd_none_or_clear_bad() sites running with
mmap_sem in read mode are somewhat speculative with the page faults, and
the result is always undefined when they run simultaneously. This is
probably why it wasn't common to run into this. For example if the
madvise(MADV_DONTNEED) runs zap_page_range() shortly before the page
fault, the hugepage will not be zapped, if the page fault runs first it
will be zapped.
Altering pmd_bad() not to error out if it finds hugepmds won't be enough
to fix this, because zap_pmd_range would then proceed to call
zap_pte_range (which would be incorrect if the pmd become a
pmd_trans_huge()).
The simplest way to fix this is to read the pmd in the local stack
(regardless of what we read, no need of actual CPU barriers, only
compiler barrier needed), and be sure it is not changing under the code
that computes its value. Even if the real pmd is changing under the
value we hold on the stack, we don't care. If we actually end up in
zap_pte_range it means the pmd was not none already and it was not huge,
and it can't become huge from under us (khugepaged locking explained
above).
All we need is to enforce that there is no way anymore that in a code
path like below, pmd_trans_huge can be false, but pmd_none_or_clear_bad
can run into a hugepmd. The overhead of a barrier() is just a compiler
tweak and should not be measurable (I only added it for THP builds). I
don't exclude different compiler versions may have prevented the race
too by caching the value of *pmd on the stack (that hasn't been
verified, but it wouldn't be impossible considering
pmd_none_or_clear_bad, pmd_bad, pmd_trans_huge, pmd_none are all inlines
and there's no external function called in between pmd_trans_huge and
pmd_none_or_clear_bad).
if (pmd_trans_huge(*pmd)) {
if (next-addr != HPAGE_PMD_SIZE) {
VM_BUG_ON(!rwsem_is_locked(&tlb->mm->mmap_sem));
split_huge_page_pmd(vma->vm_mm, pmd);
} else if (zap_huge_pmd(tlb, vma, pmd, addr))
continue;
/* fall through */
}
if (pmd_none_or_clear_bad(pmd))
Because this race condition could be exercised without special
privileges this was reported in CVE-2012-1179.
The race was identified and fully explained by Ulrich who debugged it.
I'm quoting his accurate explanation below, for reference.
====== start quote =======
mapcount 0 page_mapcount 1
kernel BUG at mm/huge_memory.c:1384!
At some point prior to the panic, a "bad pmd ..." message similar to the
following is logged on the console:
mm/memory.c:145: bad pmd ffff8800376e1f98(80000000314000e7).
The "bad pmd ..." message is logged by pmd_clear_bad() before it clears
the page's PMD table entry.
143 void pmd_clear_bad(pmd_t *pmd)
144 {
-> 145 pmd_ERROR(*pmd);
146 pmd_clear(pmd);
147 }
After the PMD table entry has been cleared, there is an inconsistency
between the actual number of PMD table entries that are mapping the page
and the page's map count (_mapcount field in struct page). When the page
is subsequently reclaimed, __split_huge_page() detects this inconsistency.
1381 if (mapcount != page_mapcount(page))
1382 printk(KERN_ERR "mapcount %d page_mapcount %d\n",
1383 mapcount, page_mapcount(page));
-> 1384 BUG_ON(mapcount != page_mapcount(page));
The root cause of the problem is a race of two threads in a multithreaded
process. Thread B incurs a page fault on a virtual address that has never
been accessed (PMD entry is zero) while Thread A is executing an madvise()
system call on a virtual address within the same 2 MB (huge page) range.
virtual address space
.---------------------.
| |
| |
.-|---------------------|
| | |
| | |<-- B(fault)
| | |
2 MB | |/////////////////////|-.
huge < |/////////////////////| > A(range)
page | |/////////////////////|-'
| | |
| | |
'-|---------------------|
| |
| |
'---------------------'
- Thread A is executing an madvise(..., MADV_DONTNEED) system call
on the virtual address range "A(range)" shown in the picture.
sys_madvise
// Acquire the semaphore in shared mode.
down_read(¤t->mm->mmap_sem)
...
madvise_vma
switch (behavior)
case MADV_DONTNEED:
madvise_dontneed
zap_page_range
unmap_vmas
unmap_page_range
zap_pud_range
zap_pmd_range
//
// Assume that this huge page has never been accessed.
// I.e. content of the PMD entry is zero (not mapped).
//
if (pmd_trans_huge(*pmd)) {
// We don't get here due to the above assumption.
}
//
// Assume that Thread B incurred a page fault and
.---------> // sneaks in here as shown below.
| //
| if (pmd_none_or_clear_bad(pmd))
| {
| if (unlikely(pmd_bad(*pmd)))
| pmd_clear_bad
| {
| pmd_ERROR
| // Log "bad pmd ..." message here.
| pmd_clear
| // Clear the page's PMD entry.
| // Thread B incremented the map count
| // in page_add_new_anon_rmap(), but
| // now the page is no longer mapped
| // by a PMD entry (-> inconsistency).
| }
| }
|
v
- Thread B is handling a page fault on virtual address "B(fault)" shown
in the picture.
...
do_page_fault
__do_page_fault
// Acquire the semaphore in shared mode.
down_read_trylock(&mm->mmap_sem)
...
handle_mm_fault
if (pmd_none(*pmd) && transparent_hugepage_enabled(vma))
// We get here due to the above assumption (PMD entry is zero).
do_huge_pmd_anonymous_page
alloc_hugepage_vma
// Allocate a new transparent huge page here.
...
__do_huge_pmd_anonymous_page
...
spin_lock(&mm->page_table_lock)
...
page_add_new_anon_rmap
// Here we increment the page's map count (starts at -1).
atomic_set(&page->_mapcount, 0)
set_pmd_at
// Here we set the page's PMD entry which will be cleared
// when Thread A calls pmd_clear_bad().
...
spin_unlock(&mm->page_table_lock)
The mmap_sem does not prevent the race because both threads are acquiring
it in shared mode (down_read). Thread B holds the page_table_lock while
the page's map count and PMD table entry are updated. However, Thread A
does not synchronize on that lock.
====== end quote =======
[akpm@linux-foundation.org: checkpatch fixes]
Reported-by: Ulrich Obergfell <uobergfe@redhat.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Jones <davej@redhat.com>
Acked-by: Larry Woodman <lwoodman@redhat.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: <stable@vger.kernel.org> [2.6.38+]
Cc: Mark Salter <msalter@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:33:42 +00:00
|
|
|
|
|
|
|
if (pmd_trans_unstable(pmd))
|
2017-09-08 23:13:41 +00:00
|
|
|
goto out;
|
2011-03-22 23:33:00 +00:00
|
|
|
/*
|
2020-06-09 04:33:54 +00:00
|
|
|
* The mmap_lock held all the way back in m_start() is what
|
2011-03-22 23:33:00 +00:00
|
|
|
* keeps khugepaged out of here and from collapsing things
|
|
|
|
* in here.
|
|
|
|
*/
|
2005-10-30 01:16:27 +00:00
|
|
|
pte = pte_offset_map_lock(vma->vm_mm, pmd, addr, &ptl);
|
2011-03-22 23:32:58 +00:00
|
|
|
for (; addr != end; pte++, addr += PAGE_SIZE)
|
2014-12-10 23:44:36 +00:00
|
|
|
smaps_pte_entry(pte, addr, walk);
|
2005-10-30 01:16:27 +00:00
|
|
|
pte_unmap_unlock(pte - 1, ptl);
|
2017-09-08 23:13:41 +00:00
|
|
|
out:
|
2005-10-30 01:16:27 +00:00
|
|
|
cond_resched();
|
2008-02-05 06:29:01 +00:00
|
|
|
return 0;
|
2005-09-03 22:55:10 +00:00
|
|
|
}
|
|
|
|
|
2012-12-18 00:03:13 +00:00
|
|
|
static void show_smap_vma_flags(struct seq_file *m, struct vm_area_struct *vma)
|
|
|
|
{
|
|
|
|
/*
|
|
|
|
* Don't forget to update Documentation/ on changes.
|
|
|
|
*/
|
|
|
|
static const char mnemonics[BITS_PER_LONG][2] = {
|
|
|
|
/*
|
|
|
|
* In case if we meet a flag we don't know about.
|
|
|
|
*/
|
|
|
|
[0 ... (BITS_PER_LONG-1)] = "??",
|
|
|
|
|
|
|
|
[ilog2(VM_READ)] = "rd",
|
|
|
|
[ilog2(VM_WRITE)] = "wr",
|
|
|
|
[ilog2(VM_EXEC)] = "ex",
|
|
|
|
[ilog2(VM_SHARED)] = "sh",
|
|
|
|
[ilog2(VM_MAYREAD)] = "mr",
|
|
|
|
[ilog2(VM_MAYWRITE)] = "mw",
|
|
|
|
[ilog2(VM_MAYEXEC)] = "me",
|
|
|
|
[ilog2(VM_MAYSHARE)] = "ms",
|
|
|
|
[ilog2(VM_GROWSDOWN)] = "gd",
|
|
|
|
[ilog2(VM_PFNMAP)] = "pf",
|
|
|
|
[ilog2(VM_DENYWRITE)] = "dw",
|
|
|
|
[ilog2(VM_LOCKED)] = "lo",
|
|
|
|
[ilog2(VM_IO)] = "io",
|
|
|
|
[ilog2(VM_SEQ_READ)] = "sr",
|
|
|
|
[ilog2(VM_RAND_READ)] = "rr",
|
|
|
|
[ilog2(VM_DONTCOPY)] = "dc",
|
|
|
|
[ilog2(VM_DONTEXPAND)] = "de",
|
|
|
|
[ilog2(VM_ACCOUNT)] = "ac",
|
|
|
|
[ilog2(VM_NORESERVE)] = "nr",
|
|
|
|
[ilog2(VM_HUGETLB)] = "ht",
|
2017-11-01 15:36:41 +00:00
|
|
|
[ilog2(VM_SYNC)] = "sf",
|
2012-12-18 00:03:13 +00:00
|
|
|
[ilog2(VM_ARCH_1)] = "ar",
|
mm,fork: introduce MADV_WIPEONFORK
Introduce MADV_WIPEONFORK semantics, which result in a VMA being empty
in the child process after fork. This differs from MADV_DONTFORK in one
important way.
If a child process accesses memory that was MADV_WIPEONFORK, it will get
zeroes. The address ranges are still valid, they are just empty.
If a child process accesses memory that was MADV_DONTFORK, it will get a
segmentation fault, since those address ranges are no longer valid in
the child after fork.
Since MADV_DONTFORK also seems to be used to allow very large programs
to fork in systems with strict memory overcommit restrictions, changing
the semantics of MADV_DONTFORK might break existing programs.
MADV_WIPEONFORK only works on private, anonymous VMAs.
The use case is libraries that store or cache information, and want to
know that they need to regenerate it in the child process after fork.
Examples of this would be:
- systemd/pulseaudio API checks (fail after fork) (replacing a getpid
check, which is too slow without a PID cache)
- PKCS#11 API reinitialization check (mandated by specification)
- glibc's upcoming PRNG (reseed after fork)
- OpenSSL PRNG (reseed after fork)
The security benefits of a forking server having a re-inialized PRNG in
every child process are pretty obvious. However, due to libraries
having all kinds of internal state, and programs getting compiled with
many different versions of each library, it is unreasonable to expect
calling programs to re-initialize everything manually after fork.
A further complication is the proliferation of clone flags, programs
bypassing glibc's functions to call clone directly, and programs calling
unshare, causing the glibc pthread_atfork hook to not get called.
It would be better to have the kernel take care of this automatically.
The patch also adds MADV_KEEPONFORK, to undo the effects of a prior
MADV_WIPEONFORK.
This is similar to the OpenBSD minherit syscall with MAP_INHERIT_ZERO:
https://man.openbsd.org/minherit.2
[akpm@linux-foundation.org: numerically order arch/parisc/include/uapi/asm/mman.h #defines]
Link: http://lkml.kernel.org/r/20170811212829.29186-3-riel@redhat.com
Signed-off-by: Rik van Riel <riel@redhat.com>
Reported-by: Florian Weimer <fweimer@redhat.com>
Reported-by: Colm MacCártaigh <colm@allcosts.net>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Drewry <wad@chromium.org>
Cc: <linux-api@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:25:15 +00:00
|
|
|
[ilog2(VM_WIPEONFORK)] = "wf",
|
2012-12-18 00:03:13 +00:00
|
|
|
[ilog2(VM_DONTDUMP)] = "dd",
|
2020-03-16 16:50:54 +00:00
|
|
|
#ifdef CONFIG_ARM64_BTI
|
|
|
|
[ilog2(VM_ARM64_BTI)] = "bt",
|
|
|
|
#endif
|
2013-11-12 23:07:49 +00:00
|
|
|
#ifdef CONFIG_MEM_SOFT_DIRTY
|
|
|
|
[ilog2(VM_SOFTDIRTY)] = "sd",
|
|
|
|
#endif
|
2012-12-18 00:03:13 +00:00
|
|
|
[ilog2(VM_MIXEDMAP)] = "mm",
|
|
|
|
[ilog2(VM_HUGEPAGE)] = "hg",
|
|
|
|
[ilog2(VM_NOHUGEPAGE)] = "nh",
|
|
|
|
[ilog2(VM_MERGEABLE)] = "mg",
|
2015-09-04 22:46:17 +00:00
|
|
|
[ilog2(VM_UFFD_MISSING)]= "um",
|
|
|
|
[ilog2(VM_UFFD_WP)] = "uw",
|
2019-11-27 10:00:27 +00:00
|
|
|
#ifdef CONFIG_ARM64_MTE
|
|
|
|
[ilog2(VM_MTE)] = "mt",
|
|
|
|
[ilog2(VM_MTE_ALLOWED)] = "",
|
|
|
|
#endif
|
2018-03-27 09:09:26 +00:00
|
|
|
#ifdef CONFIG_ARCH_HAS_PKEYS
|
2016-02-12 21:02:27 +00:00
|
|
|
/* These come out via ProtectionKey: */
|
|
|
|
[ilog2(VM_PKEY_BIT0)] = "",
|
|
|
|
[ilog2(VM_PKEY_BIT1)] = "",
|
|
|
|
[ilog2(VM_PKEY_BIT2)] = "",
|
|
|
|
[ilog2(VM_PKEY_BIT3)] = "",
|
2018-03-27 09:09:27 +00:00
|
|
|
#if VM_PKEY_BIT4
|
|
|
|
[ilog2(VM_PKEY_BIT4)] = "",
|
2016-02-12 21:02:27 +00:00
|
|
|
#endif
|
2018-03-27 09:09:26 +00:00
|
|
|
#endif /* CONFIG_ARCH_HAS_PKEYS */
|
2012-12-18 00:03:13 +00:00
|
|
|
};
|
|
|
|
size_t i;
|
|
|
|
|
|
|
|
seq_puts(m, "VmFlags: ");
|
|
|
|
for (i = 0; i < BITS_PER_LONG; i++) {
|
2016-02-12 21:02:27 +00:00
|
|
|
if (!mnemonics[i][0])
|
|
|
|
continue;
|
2012-12-18 00:03:13 +00:00
|
|
|
if (vma->vm_flags & (1UL << i)) {
|
2018-04-10 23:31:19 +00:00
|
|
|
seq_putc(m, mnemonics[i][0]);
|
|
|
|
seq_putc(m, mnemonics[i][1]);
|
|
|
|
seq_putc(m, ' ');
|
2012-12-18 00:03:13 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
seq_putc(m, '\n');
|
|
|
|
}
|
|
|
|
|
2015-11-06 02:47:11 +00:00
|
|
|
#ifdef CONFIG_HUGETLB_PAGE
|
|
|
|
static int smaps_hugetlb_range(pte_t *pte, unsigned long hmask,
|
|
|
|
unsigned long addr, unsigned long end,
|
|
|
|
struct mm_walk *walk)
|
|
|
|
{
|
|
|
|
struct mem_size_stats *mss = walk->private;
|
|
|
|
struct vm_area_struct *vma = walk->vma;
|
|
|
|
struct page *page = NULL;
|
|
|
|
|
|
|
|
if (pte_present(*pte)) {
|
|
|
|
page = vm_normal_page(vma, addr, *pte);
|
|
|
|
} else if (is_swap_pte(*pte)) {
|
|
|
|
swp_entry_t swpent = pte_to_swp_entry(*pte);
|
|
|
|
|
|
|
|
if (is_migration_entry(swpent))
|
|
|
|
page = migration_entry_to_page(swpent);
|
2017-09-08 23:11:43 +00:00
|
|
|
else if (is_device_private_entry(swpent))
|
|
|
|
page = device_private_entry_to_page(swpent);
|
2015-11-06 02:47:11 +00:00
|
|
|
}
|
|
|
|
if (page) {
|
|
|
|
int mapcount = page_mapcount(page);
|
|
|
|
|
|
|
|
if (mapcount >= 2)
|
|
|
|
mss->shared_hugetlb += huge_page_size(hstate_vma(vma));
|
|
|
|
else
|
|
|
|
mss->private_hugetlb += huge_page_size(hstate_vma(vma));
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
2019-08-28 14:19:54 +00:00
|
|
|
#else
|
|
|
|
#define smaps_hugetlb_range NULL
|
2015-11-06 02:47:11 +00:00
|
|
|
#endif /* HUGETLB_PAGE */
|
|
|
|
|
2019-08-28 14:19:54 +00:00
|
|
|
static const struct mm_walk_ops smaps_walk_ops = {
|
|
|
|
.pmd_entry = smaps_pte_range,
|
|
|
|
.hugetlb_entry = smaps_hugetlb_range,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct mm_walk_ops smaps_shmem_walk_ops = {
|
|
|
|
.pmd_entry = smaps_pte_range,
|
|
|
|
.hugetlb_entry = smaps_hugetlb_range,
|
|
|
|
.pte_hole = smaps_pte_hole,
|
|
|
|
};
|
|
|
|
|
2020-10-13 23:53:43 +00:00
|
|
|
/*
|
|
|
|
* Gather mem stats from @vma with the indicated beginning
|
|
|
|
* address @start, and keep them in @mss.
|
|
|
|
*
|
|
|
|
* Use vm_start of @vma as the beginning address if @start is 0.
|
|
|
|
*/
|
2018-08-22 04:52:52 +00:00
|
|
|
static void smap_gather_stats(struct vm_area_struct *vma,
|
2020-10-13 23:53:43 +00:00
|
|
|
struct mem_size_stats *mss, unsigned long start)
|
2005-09-03 22:55:10 +00:00
|
|
|
{
|
2020-10-13 23:53:43 +00:00
|
|
|
const struct mm_walk_ops *ops = &smaps_walk_ops;
|
|
|
|
|
|
|
|
/* Invalid start */
|
|
|
|
if (start >= vma->vm_end)
|
|
|
|
return;
|
|
|
|
|
mm, proc: account for shmem swap in /proc/pid/smaps
Currently, /proc/pid/smaps will always show "Swap: 0 kB" for
shmem-backed mappings, even if the mapped portion does contain pages
that were swapped out. This is because unlike private anonymous
mappings, shmem does not change pte to swap entry, but pte_none when
swapping the page out. In the smaps page walk, such page thus looks
like it was never faulted in.
This patch changes smaps_pte_entry() to determine the swap status for
such pte_none entries for shmem mappings, similarly to how
mincore_page() does it. Swapped out shmem pages are thus accounted for.
For private mappings of tmpfs files that COWed some of the pages, swaped
out status of the original shmem pages is naturally ignored. If some of
the private copies was also swapped out, they are accounted via their
page table swap entries, so the resulting reported swap usage is then a
sum of both swapped out private copies, and swapped out shmem pages that
were not COWed. No double accounting can thus happen.
The accounting is arguably still not as precise as for private anonymous
mappings, since now we will count also pages that the process in
question never accessed, but another process populated them and then let
them become swapped out. I believe it is still less confusing and
subtle than not showing any swap usage by shmem mappings at all.
Swapped out counter might of interest of users who would like to prevent
from future swapins during performance critical operation and pre-fault
them at their convenience. Especially for larger swapped out regions
the cost of swapin is much higher than a fresh page allocation. So a
differentiation between pte_none vs. swapped out is important for those
usecases.
One downside of this patch is that it makes /proc/pid/smaps more
expensive for shmem mappings, as we consult the radix tree for each
pte_none entry, so the overal complexity is O(n*log(n)). I have
measured this on a process that creates a 2GB mapping and dirties single
pages with a stride of 2MB, and time how long does it take to cat
/proc/pid/smaps of this process 100 times.
Private anonymous mapping:
real 0m0.949s
user 0m0.116s
sys 0m0.348s
Mapping of a /dev/shm/file:
real 0m3.831s
user 0m0.180s
sys 0m3.212s
The difference is rather substantial, so the next patch will reduce the
cost for shared or read-only mappings.
In a less controlled experiment, I've gathered pids of processes on my
desktop that have either '/dev/shm/*' or 'SYSV*' in smaps. This
included the Chrome browser and some KDE processes. Again, I've run cat
/proc/pid/smaps on each 100 times.
Before this patch:
real 0m9.050s
user 0m0.518s
sys 0m8.066s
After this patch:
real 0m9.221s
user 0m0.541s
sys 0m8.187s
This suggests low impact on average systems.
Note that this patch doesn't attempt to adjust the SwapPss field for
shmem mappings, which would need extra work to determine who else could
have the pages mapped. Thus the value stays zero except for COWed
swapped out pages in a shmem mapping, which are accounted as usual.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Jerome Marchand <jmarchan@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14 23:19:17 +00:00
|
|
|
#ifdef CONFIG_SHMEM
|
2018-10-26 22:02:16 +00:00
|
|
|
/* In case of smaps_rollup, reset the value from previous vma */
|
|
|
|
mss->check_shmem_swap = false;
|
mm, proc: account for shmem swap in /proc/pid/smaps
Currently, /proc/pid/smaps will always show "Swap: 0 kB" for
shmem-backed mappings, even if the mapped portion does contain pages
that were swapped out. This is because unlike private anonymous
mappings, shmem does not change pte to swap entry, but pte_none when
swapping the page out. In the smaps page walk, such page thus looks
like it was never faulted in.
This patch changes smaps_pte_entry() to determine the swap status for
such pte_none entries for shmem mappings, similarly to how
mincore_page() does it. Swapped out shmem pages are thus accounted for.
For private mappings of tmpfs files that COWed some of the pages, swaped
out status of the original shmem pages is naturally ignored. If some of
the private copies was also swapped out, they are accounted via their
page table swap entries, so the resulting reported swap usage is then a
sum of both swapped out private copies, and swapped out shmem pages that
were not COWed. No double accounting can thus happen.
The accounting is arguably still not as precise as for private anonymous
mappings, since now we will count also pages that the process in
question never accessed, but another process populated them and then let
them become swapped out. I believe it is still less confusing and
subtle than not showing any swap usage by shmem mappings at all.
Swapped out counter might of interest of users who would like to prevent
from future swapins during performance critical operation and pre-fault
them at their convenience. Especially for larger swapped out regions
the cost of swapin is much higher than a fresh page allocation. So a
differentiation between pte_none vs. swapped out is important for those
usecases.
One downside of this patch is that it makes /proc/pid/smaps more
expensive for shmem mappings, as we consult the radix tree for each
pte_none entry, so the overal complexity is O(n*log(n)). I have
measured this on a process that creates a 2GB mapping and dirties single
pages with a stride of 2MB, and time how long does it take to cat
/proc/pid/smaps of this process 100 times.
Private anonymous mapping:
real 0m0.949s
user 0m0.116s
sys 0m0.348s
Mapping of a /dev/shm/file:
real 0m3.831s
user 0m0.180s
sys 0m3.212s
The difference is rather substantial, so the next patch will reduce the
cost for shared or read-only mappings.
In a less controlled experiment, I've gathered pids of processes on my
desktop that have either '/dev/shm/*' or 'SYSV*' in smaps. This
included the Chrome browser and some KDE processes. Again, I've run cat
/proc/pid/smaps on each 100 times.
Before this patch:
real 0m9.050s
user 0m0.518s
sys 0m8.066s
After this patch:
real 0m9.221s
user 0m0.541s
sys 0m8.187s
This suggests low impact on average systems.
Note that this patch doesn't attempt to adjust the SwapPss field for
shmem mappings, which would need extra work to determine who else could
have the pages mapped. Thus the value stays zero except for COWed
swapped out pages in a shmem mapping, which are accounted as usual.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Jerome Marchand <jmarchan@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14 23:19:17 +00:00
|
|
|
if (vma->vm_file && shmem_mapping(vma->vm_file->f_mapping)) {
|
mm, proc: reduce cost of /proc/pid/smaps for shmem mappings
The previous patch has improved swap accounting for shmem mapping, which
however made /proc/pid/smaps more expensive for shmem mappings, as we
consult the radix tree for each pte_none entry, so the overal complexity
is O(n*log(n)).
We can reduce this significantly for mappings that cannot contain COWed
pages, because then we can either use the statistics tha shmem object
itself tracks (if the mapping contains the whole object, or the swap
usage of the whole object is zero), or use the radix tree iterator,
which is much more effective than repeated find_get_entry() calls.
This patch therefore introduces a function shmem_swap_usage(vma) and
makes /proc/pid/smaps use it when possible. Only for writable private
mappings of shmem objects (i.e. tmpfs files) with the shmem object
itself (partially) swapped outwe have to resort to the find_get_entry()
approach.
Hopefully such mappings are relatively uncommon.
To demonstrate the diference, I have measured this on a process that
creates a 2GB mapping and dirties single pages with a stride of 2MB, and
time how long does it take to cat /proc/pid/smaps of this process 100
times.
Private writable mapping of a /dev/shm/file (the most complex case):
real 0m3.831s
user 0m0.180s
sys 0m3.212s
Shared mapping of an almost full mapping of a partially swapped /dev/shm/file
(which needs to employ the radix tree iterator).
real 0m1.351s
user 0m0.096s
sys 0m0.768s
Same, but with /dev/shm/file not swapped (so no radix tree walk needed)
real 0m0.935s
user 0m0.128s
sys 0m0.344s
Private anonymous mapping:
real 0m0.949s
user 0m0.116s
sys 0m0.348s
The cost is now much closer to the private anonymous mapping case, unless
the shmem mapping is private and writable.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14 23:19:20 +00:00
|
|
|
/*
|
|
|
|
* For shared or readonly shmem mappings we know that all
|
|
|
|
* swapped out pages belong to the shmem object, and we can
|
|
|
|
* obtain the swap value much more efficiently. For private
|
|
|
|
* writable mappings, we might have COW pages that are
|
|
|
|
* not affected by the parent swapped out pages of the shmem
|
|
|
|
* object, so we have to distinguish them during the page walk.
|
|
|
|
* Unless we know that the shmem object (or the part mapped by
|
|
|
|
* our VMA) has no swapped out pages at all.
|
|
|
|
*/
|
|
|
|
unsigned long shmem_swapped = shmem_swap_usage(vma);
|
|
|
|
|
2020-10-13 23:53:43 +00:00
|
|
|
if (!start && (!shmem_swapped || (vma->vm_flags & VM_SHARED) ||
|
|
|
|
!(vma->vm_flags & VM_WRITE))) {
|
2018-10-26 22:02:16 +00:00
|
|
|
mss->swap += shmem_swapped;
|
mm, proc: reduce cost of /proc/pid/smaps for shmem mappings
The previous patch has improved swap accounting for shmem mapping, which
however made /proc/pid/smaps more expensive for shmem mappings, as we
consult the radix tree for each pte_none entry, so the overal complexity
is O(n*log(n)).
We can reduce this significantly for mappings that cannot contain COWed
pages, because then we can either use the statistics tha shmem object
itself tracks (if the mapping contains the whole object, or the swap
usage of the whole object is zero), or use the radix tree iterator,
which is much more effective than repeated find_get_entry() calls.
This patch therefore introduces a function shmem_swap_usage(vma) and
makes /proc/pid/smaps use it when possible. Only for writable private
mappings of shmem objects (i.e. tmpfs files) with the shmem object
itself (partially) swapped outwe have to resort to the find_get_entry()
approach.
Hopefully such mappings are relatively uncommon.
To demonstrate the diference, I have measured this on a process that
creates a 2GB mapping and dirties single pages with a stride of 2MB, and
time how long does it take to cat /proc/pid/smaps of this process 100
times.
Private writable mapping of a /dev/shm/file (the most complex case):
real 0m3.831s
user 0m0.180s
sys 0m3.212s
Shared mapping of an almost full mapping of a partially swapped /dev/shm/file
(which needs to employ the radix tree iterator).
real 0m1.351s
user 0m0.096s
sys 0m0.768s
Same, but with /dev/shm/file not swapped (so no radix tree walk needed)
real 0m0.935s
user 0m0.128s
sys 0m0.344s
Private anonymous mapping:
real 0m0.949s
user 0m0.116s
sys 0m0.348s
The cost is now much closer to the private anonymous mapping case, unless
the shmem mapping is private and writable.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14 23:19:20 +00:00
|
|
|
} else {
|
mm: add /proc/pid/smaps_rollup
/proc/pid/smaps_rollup is a new proc file that improves the performance
of user programs that determine aggregate memory statistics (e.g., total
PSS) of a process.
Android regularly "samples" the memory usage of various processes in
order to balance its memory pool sizes. This sampling process involves
opening /proc/pid/smaps and summing certain fields. For very large
processes, sampling memory use this way can take several hundred
milliseconds, due mostly to the overhead of the seq_printf calls in
task_mmu.c.
smaps_rollup improves the situation. It contains most of the fields of
/proc/pid/smaps, but instead of a set of fields for each VMA,
smaps_rollup instead contains one synthetic smaps-format entry
representing the whole process. In the single smaps_rollup synthetic
entry, each field is the summation of the corresponding field in all of
the real-smaps VMAs. Using a common format for smaps_rollup and smaps
allows userspace parsers to repurpose parsers meant for use with
non-rollup smaps for smaps_rollup, and it allows userspace to switch
between smaps_rollup and smaps at runtime (say, based on the
availability of smaps_rollup in a given kernel) with minimal fuss.
By using smaps_rollup instead of smaps, a caller can avoid the
significant overhead of formatting, reading, and parsing each of a large
process's potentially very numerous memory mappings. For sampling
system_server's PSS in Android, we measured a 12x speedup, representing
a savings of several hundred milliseconds.
One alternative to a new per-process proc file would have been including
PSS information in /proc/pid/status. We considered this option but
thought that PSS would be too expensive (by a few orders of magnitude)
to collect relative to what's already emitted as part of
/proc/pid/status, and slowing every user of /proc/pid/status for the
sake of readers that happen to want PSS feels wrong.
The code itself works by reusing the existing VMA-walking framework we
use for regular smaps generation and keeping the mem_size_stats
structure around between VMA walks instead of using a fresh one for each
VMA. In this way, summation happens automatically. We let seq_file
walk over the VMAs just as it does for regular smaps and just emit
nothing to the seq_file until we hit the last VMA.
Benchmarks:
using smaps:
iterations:1000 pid:1163 pss:220023808
0m29.46s real 0m08.28s user 0m20.98s system
using smaps_rollup:
iterations:1000 pid:1163 pss:220702720
0m04.39s real 0m00.03s user 0m04.31s system
We're using the PSS samples we collect asynchronously for
system-management tasks like fine-tuning oom_adj_score, memory use
tracking for debugging, application-level memory-use attribution, and
deciding whether we want to kill large processes during system idle
maintenance windows. Android has been using PSS for these purposes for
a long time; as the average process VMA count has increased and and
devices become more efficiency-conscious, PSS-collection inefficiency
has started to matter more. IMHO, it'd be a lot safer to optimize the
existing PSS-collection model, which has been fine-tuned over the years,
instead of changing the memory tracking approach entirely to work around
smaps-generation inefficiency.
Tim said:
: There are two main reasons why Android gathers PSS information:
:
: 1. Android devices can show the user the amount of memory used per
: application via the settings app. This is a less important use case.
:
: 2. We log PSS to help identify leaks in applications. We have found
: an enormous number of bugs (in the Android platform, in Google's own
: apps, and in third-party applications) using this data.
:
: To do this, system_server (the main process in Android userspace) will
: sample the PSS of a process three seconds after it changes state (for
: example, app is launched and becomes the foreground application) and about
: every ten minutes after that. The net result is that PSS collection is
: regularly running on at least one process in the system (usually a few
: times a minute while the screen is on, less when screen is off due to
: suspend). PSS of a process is an incredibly useful stat to track, and we
: aren't going to get rid of it. We've looked at some very hacky approaches
: using RSS ("take the RSS of the target process, subtract the RSS of the
: zygote process that is the parent of all Android apps") to reduce the
: accounting time, but it regularly overestimated the memory used by 20+
: percent. Accordingly, I don't think that there's a good alternative to
: using PSS.
:
: We started looking into PSS collection performance after we noticed random
: frequency spikes while a phone's screen was off; occasionally, one of the
: CPU clusters would ramp to a high frequency because there was 200-300ms of
: constant CPU work from a single thread in the main Android userspace
: process. The work causing the spike (which is reasonable governor
: behavior given the amount of CPU time needed) was always PSS collection.
: As a result, Android is burning more power than we should be on PSS
: collection.
:
: The other issue (and why I'm less sure about improving smaps as a
: long-term solution) is that the number of VMAs per process has increased
: significantly from release to release. After trying to figure out why we
: were seeing these 200-300ms PSS collection times on Android O but had not
: noticed it in previous versions, we found that the number of VMAs in the
: main system process increased by 50% from Android N to Android O (from
: ~1800 to ~2700) and varying increases in every userspace process. Android
: M to N also had an increase in the number of VMAs, although not as much.
: I'm not sure why this is increasing so much over time, but thinking about
: ASLR and ways to make ASLR better, I expect that this will continue to
: increase going forward. I would not be surprised if we hit 5000 VMAs on
: the main Android process (system_server) by 2020.
:
: If we assume that the number of VMAs is going to increase over time, then
: doing anything we can do to reduce the overhead of each VMA during PSS
: collection seems like the right way to go, and that means outputting an
: aggregate statistic (to avoid whatever overhead there is per line in
: writing smaps and in reading each line from userspace).
Link: http://lkml.kernel.org/r/20170812022148.178293-1-dancol@google.com
Signed-off-by: Daniel Colascione <dancol@google.com>
Cc: Tim Murray <timmurray@google.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:25:08 +00:00
|
|
|
mss->check_shmem_swap = true;
|
2020-10-13 23:53:43 +00:00
|
|
|
ops = &smaps_shmem_walk_ops;
|
mm, proc: reduce cost of /proc/pid/smaps for shmem mappings
The previous patch has improved swap accounting for shmem mapping, which
however made /proc/pid/smaps more expensive for shmem mappings, as we
consult the radix tree for each pte_none entry, so the overal complexity
is O(n*log(n)).
We can reduce this significantly for mappings that cannot contain COWed
pages, because then we can either use the statistics tha shmem object
itself tracks (if the mapping contains the whole object, or the swap
usage of the whole object is zero), or use the radix tree iterator,
which is much more effective than repeated find_get_entry() calls.
This patch therefore introduces a function shmem_swap_usage(vma) and
makes /proc/pid/smaps use it when possible. Only for writable private
mappings of shmem objects (i.e. tmpfs files) with the shmem object
itself (partially) swapped outwe have to resort to the find_get_entry()
approach.
Hopefully such mappings are relatively uncommon.
To demonstrate the diference, I have measured this on a process that
creates a 2GB mapping and dirties single pages with a stride of 2MB, and
time how long does it take to cat /proc/pid/smaps of this process 100
times.
Private writable mapping of a /dev/shm/file (the most complex case):
real 0m3.831s
user 0m0.180s
sys 0m3.212s
Shared mapping of an almost full mapping of a partially swapped /dev/shm/file
(which needs to employ the radix tree iterator).
real 0m1.351s
user 0m0.096s
sys 0m0.768s
Same, but with /dev/shm/file not swapped (so no radix tree walk needed)
real 0m0.935s
user 0m0.128s
sys 0m0.344s
Private anonymous mapping:
real 0m0.949s
user 0m0.116s
sys 0m0.348s
The cost is now much closer to the private anonymous mapping case, unless
the shmem mapping is private and writable.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14 23:19:20 +00:00
|
|
|
}
|
mm, proc: account for shmem swap in /proc/pid/smaps
Currently, /proc/pid/smaps will always show "Swap: 0 kB" for
shmem-backed mappings, even if the mapped portion does contain pages
that were swapped out. This is because unlike private anonymous
mappings, shmem does not change pte to swap entry, but pte_none when
swapping the page out. In the smaps page walk, such page thus looks
like it was never faulted in.
This patch changes smaps_pte_entry() to determine the swap status for
such pte_none entries for shmem mappings, similarly to how
mincore_page() does it. Swapped out shmem pages are thus accounted for.
For private mappings of tmpfs files that COWed some of the pages, swaped
out status of the original shmem pages is naturally ignored. If some of
the private copies was also swapped out, they are accounted via their
page table swap entries, so the resulting reported swap usage is then a
sum of both swapped out private copies, and swapped out shmem pages that
were not COWed. No double accounting can thus happen.
The accounting is arguably still not as precise as for private anonymous
mappings, since now we will count also pages that the process in
question never accessed, but another process populated them and then let
them become swapped out. I believe it is still less confusing and
subtle than not showing any swap usage by shmem mappings at all.
Swapped out counter might of interest of users who would like to prevent
from future swapins during performance critical operation and pre-fault
them at their convenience. Especially for larger swapped out regions
the cost of swapin is much higher than a fresh page allocation. So a
differentiation between pte_none vs. swapped out is important for those
usecases.
One downside of this patch is that it makes /proc/pid/smaps more
expensive for shmem mappings, as we consult the radix tree for each
pte_none entry, so the overal complexity is O(n*log(n)). I have
measured this on a process that creates a 2GB mapping and dirties single
pages with a stride of 2MB, and time how long does it take to cat
/proc/pid/smaps of this process 100 times.
Private anonymous mapping:
real 0m0.949s
user 0m0.116s
sys 0m0.348s
Mapping of a /dev/shm/file:
real 0m3.831s
user 0m0.180s
sys 0m3.212s
The difference is rather substantial, so the next patch will reduce the
cost for shared or read-only mappings.
In a less controlled experiment, I've gathered pids of processes on my
desktop that have either '/dev/shm/*' or 'SYSV*' in smaps. This
included the Chrome browser and some KDE processes. Again, I've run cat
/proc/pid/smaps on each 100 times.
Before this patch:
real 0m9.050s
user 0m0.518s
sys 0m8.066s
After this patch:
real 0m9.221s
user 0m0.541s
sys 0m8.187s
This suggests low impact on average systems.
Note that this patch doesn't attempt to adjust the SwapPss field for
shmem mappings, which would need extra work to determine who else could
have the pages mapped. Thus the value stays zero except for COWed
swapped out pages in a shmem mapping, which are accounted as usual.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Jerome Marchand <jmarchan@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14 23:19:17 +00:00
|
|
|
}
|
|
|
|
#endif
|
2020-06-09 04:33:54 +00:00
|
|
|
/* mmap_lock is held in m_start */
|
2020-10-13 23:53:43 +00:00
|
|
|
if (!start)
|
|
|
|
walk_page_vma(vma, ops, mss);
|
|
|
|
else
|
|
|
|
walk_page_range(vma->vm_mm, start, vma->vm_end, ops, mss);
|
2018-08-22 04:52:52 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
#define SEQ_PUT_DEC(str, val) \
|
|
|
|
seq_put_decimal_ull_width(m, str, (val) >> 10, 8)
|
2018-08-22 04:52:56 +00:00
|
|
|
|
|
|
|
/* Show the contents common for smaps and smaps_rollup */
|
2019-07-12 04:00:10 +00:00
|
|
|
static void __show_smap(struct seq_file *m, const struct mem_size_stats *mss,
|
|
|
|
bool rollup_mode)
|
2018-08-22 04:52:56 +00:00
|
|
|
{
|
|
|
|
SEQ_PUT_DEC("Rss: ", mss->resident);
|
|
|
|
SEQ_PUT_DEC(" kB\nPss: ", mss->pss >> PSS_SHIFT);
|
2019-07-12 04:00:10 +00:00
|
|
|
if (rollup_mode) {
|
|
|
|
/*
|
|
|
|
* These are meaningful only for smaps_rollup, otherwise two of
|
|
|
|
* them are zero, and the other one is the same as Pss.
|
|
|
|
*/
|
|
|
|
SEQ_PUT_DEC(" kB\nPss_Anon: ",
|
|
|
|
mss->pss_anon >> PSS_SHIFT);
|
|
|
|
SEQ_PUT_DEC(" kB\nPss_File: ",
|
|
|
|
mss->pss_file >> PSS_SHIFT);
|
|
|
|
SEQ_PUT_DEC(" kB\nPss_Shmem: ",
|
|
|
|
mss->pss_shmem >> PSS_SHIFT);
|
|
|
|
}
|
2018-08-22 04:52:56 +00:00
|
|
|
SEQ_PUT_DEC(" kB\nShared_Clean: ", mss->shared_clean);
|
|
|
|
SEQ_PUT_DEC(" kB\nShared_Dirty: ", mss->shared_dirty);
|
|
|
|
SEQ_PUT_DEC(" kB\nPrivate_Clean: ", mss->private_clean);
|
|
|
|
SEQ_PUT_DEC(" kB\nPrivate_Dirty: ", mss->private_dirty);
|
|
|
|
SEQ_PUT_DEC(" kB\nReferenced: ", mss->referenced);
|
|
|
|
SEQ_PUT_DEC(" kB\nAnonymous: ", mss->anonymous);
|
|
|
|
SEQ_PUT_DEC(" kB\nLazyFree: ", mss->lazyfree);
|
|
|
|
SEQ_PUT_DEC(" kB\nAnonHugePages: ", mss->anonymous_thp);
|
|
|
|
SEQ_PUT_DEC(" kB\nShmemPmdMapped: ", mss->shmem_thp);
|
2020-08-12 01:30:57 +00:00
|
|
|
SEQ_PUT_DEC(" kB\nFilePmdMapped: ", mss->file_thp);
|
2018-08-22 04:52:56 +00:00
|
|
|
SEQ_PUT_DEC(" kB\nShared_Hugetlb: ", mss->shared_hugetlb);
|
|
|
|
seq_put_decimal_ull_width(m, " kB\nPrivate_Hugetlb: ",
|
|
|
|
mss->private_hugetlb >> 10, 7);
|
|
|
|
SEQ_PUT_DEC(" kB\nSwap: ", mss->swap);
|
|
|
|
SEQ_PUT_DEC(" kB\nSwapPss: ",
|
|
|
|
mss->swap_pss >> PSS_SHIFT);
|
|
|
|
SEQ_PUT_DEC(" kB\nLocked: ",
|
|
|
|
mss->pss_locked >> PSS_SHIFT);
|
|
|
|
seq_puts(m, " kB\n");
|
|
|
|
}
|
|
|
|
|
2018-08-22 04:52:52 +00:00
|
|
|
static int show_smap(struct seq_file *m, void *v)
|
|
|
|
{
|
|
|
|
struct vm_area_struct *vma = v;
|
mm: /proc/pid/smaps_rollup: convert to single value seq_file
The /proc/pid/smaps_rollup file is currently implemented via the
m_start/m_next/m_stop seq_file iterators shared with the other maps files,
that iterate over vma's. However, the rollup file doesn't print anything
for each vma, only accumulate the stats.
There are some issues with the current code as reported in [1] - the
accumulated stats can get skewed if seq_file start()/stop() op is called
multiple times, if show() is called multiple times, and after seeks to
non-zero position.
Patch [1] fixed those within existing design, but I believe it is
fundamentally wrong to expose the vma iterators to the seq_file mechanism
when smaps_rollup shows logically a single set of values for the whole
address space.
This patch thus refactors the code to provide a single "value" at offset
0, with vma iteration to gather the stats done internally. This fixes the
situations where results are skewed, and simplifies the code, especially
in show_smap(), at the expense of somewhat less code reuse.
[1] https://marc.info/?l=linux-mm&m=151927723128134&w=2
[vbabka@suse.c: use seq_file infrastructure]
Link: http://lkml.kernel.org/r/bf4525b0-fd5b-4c4c-2cb3-adee3dd95a48@suse.cz
Link: http://lkml.kernel.org/r/20180723111933.15443-5-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Daniel Colascione <dancol@google.com>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 04:52:59 +00:00
|
|
|
struct mem_size_stats mss;
|
|
|
|
|
|
|
|
memset(&mss, 0, sizeof(mss));
|
|
|
|
|
2020-10-13 23:53:43 +00:00
|
|
|
smap_gather_stats(vma, &mss, 0);
|
mm: /proc/pid/smaps_rollup: convert to single value seq_file
The /proc/pid/smaps_rollup file is currently implemented via the
m_start/m_next/m_stop seq_file iterators shared with the other maps files,
that iterate over vma's. However, the rollup file doesn't print anything
for each vma, only accumulate the stats.
There are some issues with the current code as reported in [1] - the
accumulated stats can get skewed if seq_file start()/stop() op is called
multiple times, if show() is called multiple times, and after seeks to
non-zero position.
Patch [1] fixed those within existing design, but I believe it is
fundamentally wrong to expose the vma iterators to the seq_file mechanism
when smaps_rollup shows logically a single set of values for the whole
address space.
This patch thus refactors the code to provide a single "value" at offset
0, with vma iteration to gather the stats done internally. This fixes the
situations where results are skewed, and simplifies the code, especially
in show_smap(), at the expense of somewhat less code reuse.
[1] https://marc.info/?l=linux-mm&m=151927723128134&w=2
[vbabka@suse.c: use seq_file infrastructure]
Link: http://lkml.kernel.org/r/bf4525b0-fd5b-4c4c-2cb3-adee3dd95a48@suse.cz
Link: http://lkml.kernel.org/r/20180723111933.15443-5-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Daniel Colascione <dancol@google.com>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 04:52:59 +00:00
|
|
|
|
|
|
|
show_map_vma(m, vma);
|
|
|
|
|
|
|
|
SEQ_PUT_DEC("Size: ", vma->vm_end - vma->vm_start);
|
|
|
|
SEQ_PUT_DEC(" kB\nKernelPageSize: ", vma_kernel_pagesize(vma));
|
|
|
|
SEQ_PUT_DEC(" kB\nMMUPageSize: ", vma_mmu_pagesize(vma));
|
|
|
|
seq_puts(m, " kB\n");
|
|
|
|
|
2019-07-12 04:00:10 +00:00
|
|
|
__show_smap(m, &mss, false);
|
mm: /proc/pid/smaps_rollup: convert to single value seq_file
The /proc/pid/smaps_rollup file is currently implemented via the
m_start/m_next/m_stop seq_file iterators shared with the other maps files,
that iterate over vma's. However, the rollup file doesn't print anything
for each vma, only accumulate the stats.
There are some issues with the current code as reported in [1] - the
accumulated stats can get skewed if seq_file start()/stop() op is called
multiple times, if show() is called multiple times, and after seeks to
non-zero position.
Patch [1] fixed those within existing design, but I believe it is
fundamentally wrong to expose the vma iterators to the seq_file mechanism
when smaps_rollup shows logically a single set of values for the whole
address space.
This patch thus refactors the code to provide a single "value" at offset
0, with vma iteration to gather the stats done internally. This fixes the
situations where results are skewed, and simplifies the code, especially
in show_smap(), at the expense of somewhat less code reuse.
[1] https://marc.info/?l=linux-mm&m=151927723128134&w=2
[vbabka@suse.c: use seq_file infrastructure]
Link: http://lkml.kernel.org/r/bf4525b0-fd5b-4c4c-2cb3-adee3dd95a48@suse.cz
Link: http://lkml.kernel.org/r/20180723111933.15443-5-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Daniel Colascione <dancol@google.com>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 04:52:59 +00:00
|
|
|
|
2020-08-12 01:30:57 +00:00
|
|
|
seq_printf(m, "THPeligible: %d\n",
|
mm: thp: fix false negative of shmem vma's THP eligibility
Commit 7635d9cbe832 ("mm, thp, proc: report THP eligibility for each
vma") introduced THPeligible bit for processes' smaps. But, when
checking the eligibility for shmem vma, __transparent_hugepage_enabled()
is called to override the result from shmem_huge_enabled(). It may
result in the anonymous vma's THP flag override shmem's. For example,
running a simple test which create THP for shmem, but with anonymous THP
disabled, when reading the process's smaps, it may show:
7fc92ec00000-7fc92f000000 rw-s 00000000 00:14 27764 /dev/shm/test
Size: 4096 kB
...
[snip]
...
ShmemPmdMapped: 4096 kB
...
[snip]
...
THPeligible: 0
And, /proc/meminfo does show THP allocated and PMD mapped too:
ShmemHugePages: 4096 kB
ShmemPmdMapped: 4096 kB
This doesn't make too much sense. The shmem objects should be treated
separately from anonymous THP. Calling shmem_huge_enabled() with
checking MMF_DISABLE_THP sounds good enough. And, we could skip stack
and dax vma check since we already checked if the vma is shmem already.
Also check if vma is suitable for THP by calling
transhuge_vma_suitable().
And minor fix to smaps output format and documentation.
Link: http://lkml.kernel.org/r/1560401041-32207-3-git-send-email-yang.shi@linux.alibaba.com
Fixes: 7635d9cbe832 ("mm, thp, proc: report THP eligibility for each vma")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-18 22:57:27 +00:00
|
|
|
transparent_hugepage_enabled(vma));
|
2018-12-28 08:38:21 +00:00
|
|
|
|
mm: /proc/pid/smaps_rollup: convert to single value seq_file
The /proc/pid/smaps_rollup file is currently implemented via the
m_start/m_next/m_stop seq_file iterators shared with the other maps files,
that iterate over vma's. However, the rollup file doesn't print anything
for each vma, only accumulate the stats.
There are some issues with the current code as reported in [1] - the
accumulated stats can get skewed if seq_file start()/stop() op is called
multiple times, if show() is called multiple times, and after seeks to
non-zero position.
Patch [1] fixed those within existing design, but I believe it is
fundamentally wrong to expose the vma iterators to the seq_file mechanism
when smaps_rollup shows logically a single set of values for the whole
address space.
This patch thus refactors the code to provide a single "value" at offset
0, with vma iteration to gather the stats done internally. This fixes the
situations where results are skewed, and simplifies the code, especially
in show_smap(), at the expense of somewhat less code reuse.
[1] https://marc.info/?l=linux-mm&m=151927723128134&w=2
[vbabka@suse.c: use seq_file infrastructure]
Link: http://lkml.kernel.org/r/bf4525b0-fd5b-4c4c-2cb3-adee3dd95a48@suse.cz
Link: http://lkml.kernel.org/r/20180723111933.15443-5-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Daniel Colascione <dancol@google.com>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 04:52:59 +00:00
|
|
|
if (arch_pkeys_enabled())
|
|
|
|
seq_printf(m, "ProtectionKey: %8u\n", vma_pkey(vma));
|
|
|
|
show_smap_vma_flags(m, vma);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int show_smaps_rollup(struct seq_file *m, void *v)
|
|
|
|
{
|
|
|
|
struct proc_maps_private *priv = m->private;
|
|
|
|
struct mem_size_stats mss;
|
|
|
|
struct mm_struct *mm;
|
|
|
|
struct vm_area_struct *vma;
|
|
|
|
unsigned long last_vma_end = 0;
|
2018-08-22 04:52:52 +00:00
|
|
|
int ret = 0;
|
|
|
|
|
mm: /proc/pid/smaps_rollup: convert to single value seq_file
The /proc/pid/smaps_rollup file is currently implemented via the
m_start/m_next/m_stop seq_file iterators shared with the other maps files,
that iterate over vma's. However, the rollup file doesn't print anything
for each vma, only accumulate the stats.
There are some issues with the current code as reported in [1] - the
accumulated stats can get skewed if seq_file start()/stop() op is called
multiple times, if show() is called multiple times, and after seeks to
non-zero position.
Patch [1] fixed those within existing design, but I believe it is
fundamentally wrong to expose the vma iterators to the seq_file mechanism
when smaps_rollup shows logically a single set of values for the whole
address space.
This patch thus refactors the code to provide a single "value" at offset
0, with vma iteration to gather the stats done internally. This fixes the
situations where results are skewed, and simplifies the code, especially
in show_smap(), at the expense of somewhat less code reuse.
[1] https://marc.info/?l=linux-mm&m=151927723128134&w=2
[vbabka@suse.c: use seq_file infrastructure]
Link: http://lkml.kernel.org/r/bf4525b0-fd5b-4c4c-2cb3-adee3dd95a48@suse.cz
Link: http://lkml.kernel.org/r/20180723111933.15443-5-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Daniel Colascione <dancol@google.com>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 04:52:59 +00:00
|
|
|
priv->task = get_proc_task(priv->inode);
|
|
|
|
if (!priv->task)
|
|
|
|
return -ESRCH;
|
mm: add /proc/pid/smaps_rollup
/proc/pid/smaps_rollup is a new proc file that improves the performance
of user programs that determine aggregate memory statistics (e.g., total
PSS) of a process.
Android regularly "samples" the memory usage of various processes in
order to balance its memory pool sizes. This sampling process involves
opening /proc/pid/smaps and summing certain fields. For very large
processes, sampling memory use this way can take several hundred
milliseconds, due mostly to the overhead of the seq_printf calls in
task_mmu.c.
smaps_rollup improves the situation. It contains most of the fields of
/proc/pid/smaps, but instead of a set of fields for each VMA,
smaps_rollup instead contains one synthetic smaps-format entry
representing the whole process. In the single smaps_rollup synthetic
entry, each field is the summation of the corresponding field in all of
the real-smaps VMAs. Using a common format for smaps_rollup and smaps
allows userspace parsers to repurpose parsers meant for use with
non-rollup smaps for smaps_rollup, and it allows userspace to switch
between smaps_rollup and smaps at runtime (say, based on the
availability of smaps_rollup in a given kernel) with minimal fuss.
By using smaps_rollup instead of smaps, a caller can avoid the
significant overhead of formatting, reading, and parsing each of a large
process's potentially very numerous memory mappings. For sampling
system_server's PSS in Android, we measured a 12x speedup, representing
a savings of several hundred milliseconds.
One alternative to a new per-process proc file would have been including
PSS information in /proc/pid/status. We considered this option but
thought that PSS would be too expensive (by a few orders of magnitude)
to collect relative to what's already emitted as part of
/proc/pid/status, and slowing every user of /proc/pid/status for the
sake of readers that happen to want PSS feels wrong.
The code itself works by reusing the existing VMA-walking framework we
use for regular smaps generation and keeping the mem_size_stats
structure around between VMA walks instead of using a fresh one for each
VMA. In this way, summation happens automatically. We let seq_file
walk over the VMAs just as it does for regular smaps and just emit
nothing to the seq_file until we hit the last VMA.
Benchmarks:
using smaps:
iterations:1000 pid:1163 pss:220023808
0m29.46s real 0m08.28s user 0m20.98s system
using smaps_rollup:
iterations:1000 pid:1163 pss:220702720
0m04.39s real 0m00.03s user 0m04.31s system
We're using the PSS samples we collect asynchronously for
system-management tasks like fine-tuning oom_adj_score, memory use
tracking for debugging, application-level memory-use attribution, and
deciding whether we want to kill large processes during system idle
maintenance windows. Android has been using PSS for these purposes for
a long time; as the average process VMA count has increased and and
devices become more efficiency-conscious, PSS-collection inefficiency
has started to matter more. IMHO, it'd be a lot safer to optimize the
existing PSS-collection model, which has been fine-tuned over the years,
instead of changing the memory tracking approach entirely to work around
smaps-generation inefficiency.
Tim said:
: There are two main reasons why Android gathers PSS information:
:
: 1. Android devices can show the user the amount of memory used per
: application via the settings app. This is a less important use case.
:
: 2. We log PSS to help identify leaks in applications. We have found
: an enormous number of bugs (in the Android platform, in Google's own
: apps, and in third-party applications) using this data.
:
: To do this, system_server (the main process in Android userspace) will
: sample the PSS of a process three seconds after it changes state (for
: example, app is launched and becomes the foreground application) and about
: every ten minutes after that. The net result is that PSS collection is
: regularly running on at least one process in the system (usually a few
: times a minute while the screen is on, less when screen is off due to
: suspend). PSS of a process is an incredibly useful stat to track, and we
: aren't going to get rid of it. We've looked at some very hacky approaches
: using RSS ("take the RSS of the target process, subtract the RSS of the
: zygote process that is the parent of all Android apps") to reduce the
: accounting time, but it regularly overestimated the memory used by 20+
: percent. Accordingly, I don't think that there's a good alternative to
: using PSS.
:
: We started looking into PSS collection performance after we noticed random
: frequency spikes while a phone's screen was off; occasionally, one of the
: CPU clusters would ramp to a high frequency because there was 200-300ms of
: constant CPU work from a single thread in the main Android userspace
: process. The work causing the spike (which is reasonable governor
: behavior given the amount of CPU time needed) was always PSS collection.
: As a result, Android is burning more power than we should be on PSS
: collection.
:
: The other issue (and why I'm less sure about improving smaps as a
: long-term solution) is that the number of VMAs per process has increased
: significantly from release to release. After trying to figure out why we
: were seeing these 200-300ms PSS collection times on Android O but had not
: noticed it in previous versions, we found that the number of VMAs in the
: main system process increased by 50% from Android N to Android O (from
: ~1800 to ~2700) and varying increases in every userspace process. Android
: M to N also had an increase in the number of VMAs, although not as much.
: I'm not sure why this is increasing so much over time, but thinking about
: ASLR and ways to make ASLR better, I expect that this will continue to
: increase going forward. I would not be surprised if we hit 5000 VMAs on
: the main Android process (system_server) by 2020.
:
: If we assume that the number of VMAs is going to increase over time, then
: doing anything we can do to reduce the overhead of each VMA during PSS
: collection seems like the right way to go, and that means outputting an
: aggregate statistic (to avoid whatever overhead there is per line in
: writing smaps and in reading each line from userspace).
Link: http://lkml.kernel.org/r/20170812022148.178293-1-dancol@google.com
Signed-off-by: Daniel Colascione <dancol@google.com>
Cc: Tim Murray <timmurray@google.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:25:08 +00:00
|
|
|
|
mm: /proc/pid/smaps_rollup: convert to single value seq_file
The /proc/pid/smaps_rollup file is currently implemented via the
m_start/m_next/m_stop seq_file iterators shared with the other maps files,
that iterate over vma's. However, the rollup file doesn't print anything
for each vma, only accumulate the stats.
There are some issues with the current code as reported in [1] - the
accumulated stats can get skewed if seq_file start()/stop() op is called
multiple times, if show() is called multiple times, and after seeks to
non-zero position.
Patch [1] fixed those within existing design, but I believe it is
fundamentally wrong to expose the vma iterators to the seq_file mechanism
when smaps_rollup shows logically a single set of values for the whole
address space.
This patch thus refactors the code to provide a single "value" at offset
0, with vma iteration to gather the stats done internally. This fixes the
situations where results are skewed, and simplifies the code, especially
in show_smap(), at the expense of somewhat less code reuse.
[1] https://marc.info/?l=linux-mm&m=151927723128134&w=2
[vbabka@suse.c: use seq_file infrastructure]
Link: http://lkml.kernel.org/r/bf4525b0-fd5b-4c4c-2cb3-adee3dd95a48@suse.cz
Link: http://lkml.kernel.org/r/20180723111933.15443-5-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Daniel Colascione <dancol@google.com>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 04:52:59 +00:00
|
|
|
mm = priv->mm;
|
|
|
|
if (!mm || !mmget_not_zero(mm)) {
|
|
|
|
ret = -ESRCH;
|
|
|
|
goto out_put_task;
|
mm: add /proc/pid/smaps_rollup
/proc/pid/smaps_rollup is a new proc file that improves the performance
of user programs that determine aggregate memory statistics (e.g., total
PSS) of a process.
Android regularly "samples" the memory usage of various processes in
order to balance its memory pool sizes. This sampling process involves
opening /proc/pid/smaps and summing certain fields. For very large
processes, sampling memory use this way can take several hundred
milliseconds, due mostly to the overhead of the seq_printf calls in
task_mmu.c.
smaps_rollup improves the situation. It contains most of the fields of
/proc/pid/smaps, but instead of a set of fields for each VMA,
smaps_rollup instead contains one synthetic smaps-format entry
representing the whole process. In the single smaps_rollup synthetic
entry, each field is the summation of the corresponding field in all of
the real-smaps VMAs. Using a common format for smaps_rollup and smaps
allows userspace parsers to repurpose parsers meant for use with
non-rollup smaps for smaps_rollup, and it allows userspace to switch
between smaps_rollup and smaps at runtime (say, based on the
availability of smaps_rollup in a given kernel) with minimal fuss.
By using smaps_rollup instead of smaps, a caller can avoid the
significant overhead of formatting, reading, and parsing each of a large
process's potentially very numerous memory mappings. For sampling
system_server's PSS in Android, we measured a 12x speedup, representing
a savings of several hundred milliseconds.
One alternative to a new per-process proc file would have been including
PSS information in /proc/pid/status. We considered this option but
thought that PSS would be too expensive (by a few orders of magnitude)
to collect relative to what's already emitted as part of
/proc/pid/status, and slowing every user of /proc/pid/status for the
sake of readers that happen to want PSS feels wrong.
The code itself works by reusing the existing VMA-walking framework we
use for regular smaps generation and keeping the mem_size_stats
structure around between VMA walks instead of using a fresh one for each
VMA. In this way, summation happens automatically. We let seq_file
walk over the VMAs just as it does for regular smaps and just emit
nothing to the seq_file until we hit the last VMA.
Benchmarks:
using smaps:
iterations:1000 pid:1163 pss:220023808
0m29.46s real 0m08.28s user 0m20.98s system
using smaps_rollup:
iterations:1000 pid:1163 pss:220702720
0m04.39s real 0m00.03s user 0m04.31s system
We're using the PSS samples we collect asynchronously for
system-management tasks like fine-tuning oom_adj_score, memory use
tracking for debugging, application-level memory-use attribution, and
deciding whether we want to kill large processes during system idle
maintenance windows. Android has been using PSS for these purposes for
a long time; as the average process VMA count has increased and and
devices become more efficiency-conscious, PSS-collection inefficiency
has started to matter more. IMHO, it'd be a lot safer to optimize the
existing PSS-collection model, which has been fine-tuned over the years,
instead of changing the memory tracking approach entirely to work around
smaps-generation inefficiency.
Tim said:
: There are two main reasons why Android gathers PSS information:
:
: 1. Android devices can show the user the amount of memory used per
: application via the settings app. This is a less important use case.
:
: 2. We log PSS to help identify leaks in applications. We have found
: an enormous number of bugs (in the Android platform, in Google's own
: apps, and in third-party applications) using this data.
:
: To do this, system_server (the main process in Android userspace) will
: sample the PSS of a process three seconds after it changes state (for
: example, app is launched and becomes the foreground application) and about
: every ten minutes after that. The net result is that PSS collection is
: regularly running on at least one process in the system (usually a few
: times a minute while the screen is on, less when screen is off due to
: suspend). PSS of a process is an incredibly useful stat to track, and we
: aren't going to get rid of it. We've looked at some very hacky approaches
: using RSS ("take the RSS of the target process, subtract the RSS of the
: zygote process that is the parent of all Android apps") to reduce the
: accounting time, but it regularly overestimated the memory used by 20+
: percent. Accordingly, I don't think that there's a good alternative to
: using PSS.
:
: We started looking into PSS collection performance after we noticed random
: frequency spikes while a phone's screen was off; occasionally, one of the
: CPU clusters would ramp to a high frequency because there was 200-300ms of
: constant CPU work from a single thread in the main Android userspace
: process. The work causing the spike (which is reasonable governor
: behavior given the amount of CPU time needed) was always PSS collection.
: As a result, Android is burning more power than we should be on PSS
: collection.
:
: The other issue (and why I'm less sure about improving smaps as a
: long-term solution) is that the number of VMAs per process has increased
: significantly from release to release. After trying to figure out why we
: were seeing these 200-300ms PSS collection times on Android O but had not
: noticed it in previous versions, we found that the number of VMAs in the
: main system process increased by 50% from Android N to Android O (from
: ~1800 to ~2700) and varying increases in every userspace process. Android
: M to N also had an increase in the number of VMAs, although not as much.
: I'm not sure why this is increasing so much over time, but thinking about
: ASLR and ways to make ASLR better, I expect that this will continue to
: increase going forward. I would not be surprised if we hit 5000 VMAs on
: the main Android process (system_server) by 2020.
:
: If we assume that the number of VMAs is going to increase over time, then
: doing anything we can do to reduce the overhead of each VMA during PSS
: collection seems like the right way to go, and that means outputting an
: aggregate statistic (to avoid whatever overhead there is per line in
: writing smaps and in reading each line from userspace).
Link: http://lkml.kernel.org/r/20170812022148.178293-1-dancol@google.com
Signed-off-by: Daniel Colascione <dancol@google.com>
Cc: Tim Murray <timmurray@google.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:25:08 +00:00
|
|
|
}
|
2008-02-05 06:29:02 +00:00
|
|
|
|
mm: /proc/pid/smaps_rollup: convert to single value seq_file
The /proc/pid/smaps_rollup file is currently implemented via the
m_start/m_next/m_stop seq_file iterators shared with the other maps files,
that iterate over vma's. However, the rollup file doesn't print anything
for each vma, only accumulate the stats.
There are some issues with the current code as reported in [1] - the
accumulated stats can get skewed if seq_file start()/stop() op is called
multiple times, if show() is called multiple times, and after seeks to
non-zero position.
Patch [1] fixed those within existing design, but I believe it is
fundamentally wrong to expose the vma iterators to the seq_file mechanism
when smaps_rollup shows logically a single set of values for the whole
address space.
This patch thus refactors the code to provide a single "value" at offset
0, with vma iteration to gather the stats done internally. This fixes the
situations where results are skewed, and simplifies the code, especially
in show_smap(), at the expense of somewhat less code reuse.
[1] https://marc.info/?l=linux-mm&m=151927723128134&w=2
[vbabka@suse.c: use seq_file infrastructure]
Link: http://lkml.kernel.org/r/bf4525b0-fd5b-4c4c-2cb3-adee3dd95a48@suse.cz
Link: http://lkml.kernel.org/r/20180723111933.15443-5-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Daniel Colascione <dancol@google.com>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 04:52:59 +00:00
|
|
|
memset(&mss, 0, sizeof(mss));
|
mm: add /proc/pid/smaps_rollup
/proc/pid/smaps_rollup is a new proc file that improves the performance
of user programs that determine aggregate memory statistics (e.g., total
PSS) of a process.
Android regularly "samples" the memory usage of various processes in
order to balance its memory pool sizes. This sampling process involves
opening /proc/pid/smaps and summing certain fields. For very large
processes, sampling memory use this way can take several hundred
milliseconds, due mostly to the overhead of the seq_printf calls in
task_mmu.c.
smaps_rollup improves the situation. It contains most of the fields of
/proc/pid/smaps, but instead of a set of fields for each VMA,
smaps_rollup instead contains one synthetic smaps-format entry
representing the whole process. In the single smaps_rollup synthetic
entry, each field is the summation of the corresponding field in all of
the real-smaps VMAs. Using a common format for smaps_rollup and smaps
allows userspace parsers to repurpose parsers meant for use with
non-rollup smaps for smaps_rollup, and it allows userspace to switch
between smaps_rollup and smaps at runtime (say, based on the
availability of smaps_rollup in a given kernel) with minimal fuss.
By using smaps_rollup instead of smaps, a caller can avoid the
significant overhead of formatting, reading, and parsing each of a large
process's potentially very numerous memory mappings. For sampling
system_server's PSS in Android, we measured a 12x speedup, representing
a savings of several hundred milliseconds.
One alternative to a new per-process proc file would have been including
PSS information in /proc/pid/status. We considered this option but
thought that PSS would be too expensive (by a few orders of magnitude)
to collect relative to what's already emitted as part of
/proc/pid/status, and slowing every user of /proc/pid/status for the
sake of readers that happen to want PSS feels wrong.
The code itself works by reusing the existing VMA-walking framework we
use for regular smaps generation and keeping the mem_size_stats
structure around between VMA walks instead of using a fresh one for each
VMA. In this way, summation happens automatically. We let seq_file
walk over the VMAs just as it does for regular smaps and just emit
nothing to the seq_file until we hit the last VMA.
Benchmarks:
using smaps:
iterations:1000 pid:1163 pss:220023808
0m29.46s real 0m08.28s user 0m20.98s system
using smaps_rollup:
iterations:1000 pid:1163 pss:220702720
0m04.39s real 0m00.03s user 0m04.31s system
We're using the PSS samples we collect asynchronously for
system-management tasks like fine-tuning oom_adj_score, memory use
tracking for debugging, application-level memory-use attribution, and
deciding whether we want to kill large processes during system idle
maintenance windows. Android has been using PSS for these purposes for
a long time; as the average process VMA count has increased and and
devices become more efficiency-conscious, PSS-collection inefficiency
has started to matter more. IMHO, it'd be a lot safer to optimize the
existing PSS-collection model, which has been fine-tuned over the years,
instead of changing the memory tracking approach entirely to work around
smaps-generation inefficiency.
Tim said:
: There are two main reasons why Android gathers PSS information:
:
: 1. Android devices can show the user the amount of memory used per
: application via the settings app. This is a less important use case.
:
: 2. We log PSS to help identify leaks in applications. We have found
: an enormous number of bugs (in the Android platform, in Google's own
: apps, and in third-party applications) using this data.
:
: To do this, system_server (the main process in Android userspace) will
: sample the PSS of a process three seconds after it changes state (for
: example, app is launched and becomes the foreground application) and about
: every ten minutes after that. The net result is that PSS collection is
: regularly running on at least one process in the system (usually a few
: times a minute while the screen is on, less when screen is off due to
: suspend). PSS of a process is an incredibly useful stat to track, and we
: aren't going to get rid of it. We've looked at some very hacky approaches
: using RSS ("take the RSS of the target process, subtract the RSS of the
: zygote process that is the parent of all Android apps") to reduce the
: accounting time, but it regularly overestimated the memory used by 20+
: percent. Accordingly, I don't think that there's a good alternative to
: using PSS.
:
: We started looking into PSS collection performance after we noticed random
: frequency spikes while a phone's screen was off; occasionally, one of the
: CPU clusters would ramp to a high frequency because there was 200-300ms of
: constant CPU work from a single thread in the main Android userspace
: process. The work causing the spike (which is reasonable governor
: behavior given the amount of CPU time needed) was always PSS collection.
: As a result, Android is burning more power than we should be on PSS
: collection.
:
: The other issue (and why I'm less sure about improving smaps as a
: long-term solution) is that the number of VMAs per process has increased
: significantly from release to release. After trying to figure out why we
: were seeing these 200-300ms PSS collection times on Android O but had not
: noticed it in previous versions, we found that the number of VMAs in the
: main system process increased by 50% from Android N to Android O (from
: ~1800 to ~2700) and varying increases in every userspace process. Android
: M to N also had an increase in the number of VMAs, although not as much.
: I'm not sure why this is increasing so much over time, but thinking about
: ASLR and ways to make ASLR better, I expect that this will continue to
: increase going forward. I would not be surprised if we hit 5000 VMAs on
: the main Android process (system_server) by 2020.
:
: If we assume that the number of VMAs is going to increase over time, then
: doing anything we can do to reduce the overhead of each VMA during PSS
: collection seems like the right way to go, and that means outputting an
: aggregate statistic (to avoid whatever overhead there is per line in
: writing smaps and in reading each line from userspace).
Link: http://lkml.kernel.org/r/20170812022148.178293-1-dancol@google.com
Signed-off-by: Daniel Colascione <dancol@google.com>
Cc: Tim Murray <timmurray@google.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:25:08 +00:00
|
|
|
|
2020-06-09 04:33:25 +00:00
|
|
|
ret = mmap_read_lock_killable(mm);
|
2019-07-12 03:59:53 +00:00
|
|
|
if (ret)
|
|
|
|
goto out_put_mm;
|
|
|
|
|
mm: /proc/pid/smaps_rollup: convert to single value seq_file
The /proc/pid/smaps_rollup file is currently implemented via the
m_start/m_next/m_stop seq_file iterators shared with the other maps files,
that iterate over vma's. However, the rollup file doesn't print anything
for each vma, only accumulate the stats.
There are some issues with the current code as reported in [1] - the
accumulated stats can get skewed if seq_file start()/stop() op is called
multiple times, if show() is called multiple times, and after seeks to
non-zero position.
Patch [1] fixed those within existing design, but I believe it is
fundamentally wrong to expose the vma iterators to the seq_file mechanism
when smaps_rollup shows logically a single set of values for the whole
address space.
This patch thus refactors the code to provide a single "value" at offset
0, with vma iteration to gather the stats done internally. This fixes the
situations where results are skewed, and simplifies the code, especially
in show_smap(), at the expense of somewhat less code reuse.
[1] https://marc.info/?l=linux-mm&m=151927723128134&w=2
[vbabka@suse.c: use seq_file infrastructure]
Link: http://lkml.kernel.org/r/bf4525b0-fd5b-4c4c-2cb3-adee3dd95a48@suse.cz
Link: http://lkml.kernel.org/r/20180723111933.15443-5-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Daniel Colascione <dancol@google.com>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 04:52:59 +00:00
|
|
|
hold_task_mempolicy(priv);
|
2018-08-22 04:52:56 +00:00
|
|
|
|
2020-10-13 23:53:47 +00:00
|
|
|
for (vma = priv->mm->mmap; vma;) {
|
2020-10-13 23:53:43 +00:00
|
|
|
smap_gather_stats(vma, &mss, 0);
|
mm: /proc/pid/smaps_rollup: convert to single value seq_file
The /proc/pid/smaps_rollup file is currently implemented via the
m_start/m_next/m_stop seq_file iterators shared with the other maps files,
that iterate over vma's. However, the rollup file doesn't print anything
for each vma, only accumulate the stats.
There are some issues with the current code as reported in [1] - the
accumulated stats can get skewed if seq_file start()/stop() op is called
multiple times, if show() is called multiple times, and after seeks to
non-zero position.
Patch [1] fixed those within existing design, but I believe it is
fundamentally wrong to expose the vma iterators to the seq_file mechanism
when smaps_rollup shows logically a single set of values for the whole
address space.
This patch thus refactors the code to provide a single "value" at offset
0, with vma iteration to gather the stats done internally. This fixes the
situations where results are skewed, and simplifies the code, especially
in show_smap(), at the expense of somewhat less code reuse.
[1] https://marc.info/?l=linux-mm&m=151927723128134&w=2
[vbabka@suse.c: use seq_file infrastructure]
Link: http://lkml.kernel.org/r/bf4525b0-fd5b-4c4c-2cb3-adee3dd95a48@suse.cz
Link: http://lkml.kernel.org/r/20180723111933.15443-5-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Daniel Colascione <dancol@google.com>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 04:52:59 +00:00
|
|
|
last_vma_end = vma->vm_end;
|
2020-10-13 23:53:47 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Release mmap_lock temporarily if someone wants to
|
|
|
|
* access it for write request.
|
|
|
|
*/
|
|
|
|
if (mmap_lock_is_contended(mm)) {
|
|
|
|
mmap_read_unlock(mm);
|
|
|
|
ret = mmap_read_lock_killable(mm);
|
|
|
|
if (ret) {
|
|
|
|
release_task_mempolicy(priv);
|
|
|
|
goto out_put_mm;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* After dropping the lock, there are four cases to
|
|
|
|
* consider. See the following example for explanation.
|
|
|
|
*
|
|
|
|
* +------+------+-----------+
|
|
|
|
* | VMA1 | VMA2 | VMA3 |
|
|
|
|
* +------+------+-----------+
|
|
|
|
* | | | |
|
|
|
|
* 4k 8k 16k 400k
|
|
|
|
*
|
|
|
|
* Suppose we drop the lock after reading VMA2 due to
|
|
|
|
* contention, then we get:
|
|
|
|
*
|
|
|
|
* last_vma_end = 16k
|
|
|
|
*
|
|
|
|
* 1) VMA2 is freed, but VMA3 exists:
|
|
|
|
*
|
|
|
|
* find_vma(mm, 16k - 1) will return VMA3.
|
|
|
|
* In this case, just continue from VMA3.
|
|
|
|
*
|
|
|
|
* 2) VMA2 still exists:
|
|
|
|
*
|
|
|
|
* find_vma(mm, 16k - 1) will return VMA2.
|
|
|
|
* Iterate the loop like the original one.
|
|
|
|
*
|
|
|
|
* 3) No more VMAs can be found:
|
|
|
|
*
|
|
|
|
* find_vma(mm, 16k - 1) will return NULL.
|
|
|
|
* No more things to do, just break.
|
|
|
|
*
|
|
|
|
* 4) (last_vma_end - 1) is the middle of a vma (VMA'):
|
|
|
|
*
|
|
|
|
* find_vma(mm, 16k - 1) will return VMA' whose range
|
|
|
|
* contains last_vma_end.
|
|
|
|
* Iterate VMA' from last_vma_end.
|
|
|
|
*/
|
|
|
|
vma = find_vma(mm, last_vma_end - 1);
|
|
|
|
/* Case 3 above */
|
|
|
|
if (!vma)
|
|
|
|
break;
|
|
|
|
|
|
|
|
/* Case 1 above */
|
|
|
|
if (vma->vm_start >= last_vma_end)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
/* Case 4 above */
|
|
|
|
if (vma->vm_end > last_vma_end)
|
|
|
|
smap_gather_stats(vma, &mss, last_vma_end);
|
|
|
|
}
|
|
|
|
/* Case 2 above */
|
|
|
|
vma = vma->vm_next;
|
mm: add /proc/pid/smaps_rollup
/proc/pid/smaps_rollup is a new proc file that improves the performance
of user programs that determine aggregate memory statistics (e.g., total
PSS) of a process.
Android regularly "samples" the memory usage of various processes in
order to balance its memory pool sizes. This sampling process involves
opening /proc/pid/smaps and summing certain fields. For very large
processes, sampling memory use this way can take several hundred
milliseconds, due mostly to the overhead of the seq_printf calls in
task_mmu.c.
smaps_rollup improves the situation. It contains most of the fields of
/proc/pid/smaps, but instead of a set of fields for each VMA,
smaps_rollup instead contains one synthetic smaps-format entry
representing the whole process. In the single smaps_rollup synthetic
entry, each field is the summation of the corresponding field in all of
the real-smaps VMAs. Using a common format for smaps_rollup and smaps
allows userspace parsers to repurpose parsers meant for use with
non-rollup smaps for smaps_rollup, and it allows userspace to switch
between smaps_rollup and smaps at runtime (say, based on the
availability of smaps_rollup in a given kernel) with minimal fuss.
By using smaps_rollup instead of smaps, a caller can avoid the
significant overhead of formatting, reading, and parsing each of a large
process's potentially very numerous memory mappings. For sampling
system_server's PSS in Android, we measured a 12x speedup, representing
a savings of several hundred milliseconds.
One alternative to a new per-process proc file would have been including
PSS information in /proc/pid/status. We considered this option but
thought that PSS would be too expensive (by a few orders of magnitude)
to collect relative to what's already emitted as part of
/proc/pid/status, and slowing every user of /proc/pid/status for the
sake of readers that happen to want PSS feels wrong.
The code itself works by reusing the existing VMA-walking framework we
use for regular smaps generation and keeping the mem_size_stats
structure around between VMA walks instead of using a fresh one for each
VMA. In this way, summation happens automatically. We let seq_file
walk over the VMAs just as it does for regular smaps and just emit
nothing to the seq_file until we hit the last VMA.
Benchmarks:
using smaps:
iterations:1000 pid:1163 pss:220023808
0m29.46s real 0m08.28s user 0m20.98s system
using smaps_rollup:
iterations:1000 pid:1163 pss:220702720
0m04.39s real 0m00.03s user 0m04.31s system
We're using the PSS samples we collect asynchronously for
system-management tasks like fine-tuning oom_adj_score, memory use
tracking for debugging, application-level memory-use attribution, and
deciding whether we want to kill large processes during system idle
maintenance windows. Android has been using PSS for these purposes for
a long time; as the average process VMA count has increased and and
devices become more efficiency-conscious, PSS-collection inefficiency
has started to matter more. IMHO, it'd be a lot safer to optimize the
existing PSS-collection model, which has been fine-tuned over the years,
instead of changing the memory tracking approach entirely to work around
smaps-generation inefficiency.
Tim said:
: There are two main reasons why Android gathers PSS information:
:
: 1. Android devices can show the user the amount of memory used per
: application via the settings app. This is a less important use case.
:
: 2. We log PSS to help identify leaks in applications. We have found
: an enormous number of bugs (in the Android platform, in Google's own
: apps, and in third-party applications) using this data.
:
: To do this, system_server (the main process in Android userspace) will
: sample the PSS of a process three seconds after it changes state (for
: example, app is launched and becomes the foreground application) and about
: every ten minutes after that. The net result is that PSS collection is
: regularly running on at least one process in the system (usually a few
: times a minute while the screen is on, less when screen is off due to
: suspend). PSS of a process is an incredibly useful stat to track, and we
: aren't going to get rid of it. We've looked at some very hacky approaches
: using RSS ("take the RSS of the target process, subtract the RSS of the
: zygote process that is the parent of all Android apps") to reduce the
: accounting time, but it regularly overestimated the memory used by 20+
: percent. Accordingly, I don't think that there's a good alternative to
: using PSS.
:
: We started looking into PSS collection performance after we noticed random
: frequency spikes while a phone's screen was off; occasionally, one of the
: CPU clusters would ramp to a high frequency because there was 200-300ms of
: constant CPU work from a single thread in the main Android userspace
: process. The work causing the spike (which is reasonable governor
: behavior given the amount of CPU time needed) was always PSS collection.
: As a result, Android is burning more power than we should be on PSS
: collection.
:
: The other issue (and why I'm less sure about improving smaps as a
: long-term solution) is that the number of VMAs per process has increased
: significantly from release to release. After trying to figure out why we
: were seeing these 200-300ms PSS collection times on Android O but had not
: noticed it in previous versions, we found that the number of VMAs in the
: main system process increased by 50% from Android N to Android O (from
: ~1800 to ~2700) and varying increases in every userspace process. Android
: M to N also had an increase in the number of VMAs, although not as much.
: I'm not sure why this is increasing so much over time, but thinking about
: ASLR and ways to make ASLR better, I expect that this will continue to
: increase going forward. I would not be surprised if we hit 5000 VMAs on
: the main Android process (system_server) by 2020.
:
: If we assume that the number of VMAs is going to increase over time, then
: doing anything we can do to reduce the overhead of each VMA during PSS
: collection seems like the right way to go, and that means outputting an
: aggregate statistic (to avoid whatever overhead there is per line in
: writing smaps and in reading each line from userspace).
Link: http://lkml.kernel.org/r/20170812022148.178293-1-dancol@google.com
Signed-off-by: Daniel Colascione <dancol@google.com>
Cc: Tim Murray <timmurray@google.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:25:08 +00:00
|
|
|
}
|
mm: /proc/pid/smaps_rollup: convert to single value seq_file
The /proc/pid/smaps_rollup file is currently implemented via the
m_start/m_next/m_stop seq_file iterators shared with the other maps files,
that iterate over vma's. However, the rollup file doesn't print anything
for each vma, only accumulate the stats.
There are some issues with the current code as reported in [1] - the
accumulated stats can get skewed if seq_file start()/stop() op is called
multiple times, if show() is called multiple times, and after seeks to
non-zero position.
Patch [1] fixed those within existing design, but I believe it is
fundamentally wrong to expose the vma iterators to the seq_file mechanism
when smaps_rollup shows logically a single set of values for the whole
address space.
This patch thus refactors the code to provide a single "value" at offset
0, with vma iteration to gather the stats done internally. This fixes the
situations where results are skewed, and simplifies the code, especially
in show_smap(), at the expense of somewhat less code reuse.
[1] https://marc.info/?l=linux-mm&m=151927723128134&w=2
[vbabka@suse.c: use seq_file infrastructure]
Link: http://lkml.kernel.org/r/bf4525b0-fd5b-4c4c-2cb3-adee3dd95a48@suse.cz
Link: http://lkml.kernel.org/r/20180723111933.15443-5-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Daniel Colascione <dancol@google.com>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 04:52:59 +00:00
|
|
|
|
|
|
|
show_vma_header_prefix(m, priv->mm->mmap->vm_start,
|
|
|
|
last_vma_end, 0, 0, 0, 0);
|
|
|
|
seq_pad(m, ' ');
|
|
|
|
seq_puts(m, "[rollup]\n");
|
|
|
|
|
2019-07-12 04:00:10 +00:00
|
|
|
__show_smap(m, &mss, true);
|
mm: /proc/pid/smaps_rollup: convert to single value seq_file
The /proc/pid/smaps_rollup file is currently implemented via the
m_start/m_next/m_stop seq_file iterators shared with the other maps files,
that iterate over vma's. However, the rollup file doesn't print anything
for each vma, only accumulate the stats.
There are some issues with the current code as reported in [1] - the
accumulated stats can get skewed if seq_file start()/stop() op is called
multiple times, if show() is called multiple times, and after seeks to
non-zero position.
Patch [1] fixed those within existing design, but I believe it is
fundamentally wrong to expose the vma iterators to the seq_file mechanism
when smaps_rollup shows logically a single set of values for the whole
address space.
This patch thus refactors the code to provide a single "value" at offset
0, with vma iteration to gather the stats done internally. This fixes the
situations where results are skewed, and simplifies the code, especially
in show_smap(), at the expense of somewhat less code reuse.
[1] https://marc.info/?l=linux-mm&m=151927723128134&w=2
[vbabka@suse.c: use seq_file infrastructure]
Link: http://lkml.kernel.org/r/bf4525b0-fd5b-4c4c-2cb3-adee3dd95a48@suse.cz
Link: http://lkml.kernel.org/r/20180723111933.15443-5-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Daniel Colascione <dancol@google.com>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 04:52:59 +00:00
|
|
|
|
|
|
|
release_task_mempolicy(priv);
|
2020-06-09 04:33:25 +00:00
|
|
|
mmap_read_unlock(mm);
|
mm: /proc/pid/smaps_rollup: convert to single value seq_file
The /proc/pid/smaps_rollup file is currently implemented via the
m_start/m_next/m_stop seq_file iterators shared with the other maps files,
that iterate over vma's. However, the rollup file doesn't print anything
for each vma, only accumulate the stats.
There are some issues with the current code as reported in [1] - the
accumulated stats can get skewed if seq_file start()/stop() op is called
multiple times, if show() is called multiple times, and after seeks to
non-zero position.
Patch [1] fixed those within existing design, but I believe it is
fundamentally wrong to expose the vma iterators to the seq_file mechanism
when smaps_rollup shows logically a single set of values for the whole
address space.
This patch thus refactors the code to provide a single "value" at offset
0, with vma iteration to gather the stats done internally. This fixes the
situations where results are skewed, and simplifies the code, especially
in show_smap(), at the expense of somewhat less code reuse.
[1] https://marc.info/?l=linux-mm&m=151927723128134&w=2
[vbabka@suse.c: use seq_file infrastructure]
Link: http://lkml.kernel.org/r/bf4525b0-fd5b-4c4c-2cb3-adee3dd95a48@suse.cz
Link: http://lkml.kernel.org/r/20180723111933.15443-5-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Daniel Colascione <dancol@google.com>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 04:52:59 +00:00
|
|
|
|
2019-07-12 03:59:53 +00:00
|
|
|
out_put_mm:
|
|
|
|
mmput(mm);
|
mm: /proc/pid/smaps_rollup: convert to single value seq_file
The /proc/pid/smaps_rollup file is currently implemented via the
m_start/m_next/m_stop seq_file iterators shared with the other maps files,
that iterate over vma's. However, the rollup file doesn't print anything
for each vma, only accumulate the stats.
There are some issues with the current code as reported in [1] - the
accumulated stats can get skewed if seq_file start()/stop() op is called
multiple times, if show() is called multiple times, and after seeks to
non-zero position.
Patch [1] fixed those within existing design, but I believe it is
fundamentally wrong to expose the vma iterators to the seq_file mechanism
when smaps_rollup shows logically a single set of values for the whole
address space.
This patch thus refactors the code to provide a single "value" at offset
0, with vma iteration to gather the stats done internally. This fixes the
situations where results are skewed, and simplifies the code, especially
in show_smap(), at the expense of somewhat less code reuse.
[1] https://marc.info/?l=linux-mm&m=151927723128134&w=2
[vbabka@suse.c: use seq_file infrastructure]
Link: http://lkml.kernel.org/r/bf4525b0-fd5b-4c4c-2cb3-adee3dd95a48@suse.cz
Link: http://lkml.kernel.org/r/20180723111933.15443-5-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Daniel Colascione <dancol@google.com>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 04:52:59 +00:00
|
|
|
out_put_task:
|
|
|
|
put_task_struct(priv->task);
|
|
|
|
priv->task = NULL;
|
|
|
|
|
mm: add /proc/pid/smaps_rollup
/proc/pid/smaps_rollup is a new proc file that improves the performance
of user programs that determine aggregate memory statistics (e.g., total
PSS) of a process.
Android regularly "samples" the memory usage of various processes in
order to balance its memory pool sizes. This sampling process involves
opening /proc/pid/smaps and summing certain fields. For very large
processes, sampling memory use this way can take several hundred
milliseconds, due mostly to the overhead of the seq_printf calls in
task_mmu.c.
smaps_rollup improves the situation. It contains most of the fields of
/proc/pid/smaps, but instead of a set of fields for each VMA,
smaps_rollup instead contains one synthetic smaps-format entry
representing the whole process. In the single smaps_rollup synthetic
entry, each field is the summation of the corresponding field in all of
the real-smaps VMAs. Using a common format for smaps_rollup and smaps
allows userspace parsers to repurpose parsers meant for use with
non-rollup smaps for smaps_rollup, and it allows userspace to switch
between smaps_rollup and smaps at runtime (say, based on the
availability of smaps_rollup in a given kernel) with minimal fuss.
By using smaps_rollup instead of smaps, a caller can avoid the
significant overhead of formatting, reading, and parsing each of a large
process's potentially very numerous memory mappings. For sampling
system_server's PSS in Android, we measured a 12x speedup, representing
a savings of several hundred milliseconds.
One alternative to a new per-process proc file would have been including
PSS information in /proc/pid/status. We considered this option but
thought that PSS would be too expensive (by a few orders of magnitude)
to collect relative to what's already emitted as part of
/proc/pid/status, and slowing every user of /proc/pid/status for the
sake of readers that happen to want PSS feels wrong.
The code itself works by reusing the existing VMA-walking framework we
use for regular smaps generation and keeping the mem_size_stats
structure around between VMA walks instead of using a fresh one for each
VMA. In this way, summation happens automatically. We let seq_file
walk over the VMAs just as it does for regular smaps and just emit
nothing to the seq_file until we hit the last VMA.
Benchmarks:
using smaps:
iterations:1000 pid:1163 pss:220023808
0m29.46s real 0m08.28s user 0m20.98s system
using smaps_rollup:
iterations:1000 pid:1163 pss:220702720
0m04.39s real 0m00.03s user 0m04.31s system
We're using the PSS samples we collect asynchronously for
system-management tasks like fine-tuning oom_adj_score, memory use
tracking for debugging, application-level memory-use attribution, and
deciding whether we want to kill large processes during system idle
maintenance windows. Android has been using PSS for these purposes for
a long time; as the average process VMA count has increased and and
devices become more efficiency-conscious, PSS-collection inefficiency
has started to matter more. IMHO, it'd be a lot safer to optimize the
existing PSS-collection model, which has been fine-tuned over the years,
instead of changing the memory tracking approach entirely to work around
smaps-generation inefficiency.
Tim said:
: There are two main reasons why Android gathers PSS information:
:
: 1. Android devices can show the user the amount of memory used per
: application via the settings app. This is a less important use case.
:
: 2. We log PSS to help identify leaks in applications. We have found
: an enormous number of bugs (in the Android platform, in Google's own
: apps, and in third-party applications) using this data.
:
: To do this, system_server (the main process in Android userspace) will
: sample the PSS of a process three seconds after it changes state (for
: example, app is launched and becomes the foreground application) and about
: every ten minutes after that. The net result is that PSS collection is
: regularly running on at least one process in the system (usually a few
: times a minute while the screen is on, less when screen is off due to
: suspend). PSS of a process is an incredibly useful stat to track, and we
: aren't going to get rid of it. We've looked at some very hacky approaches
: using RSS ("take the RSS of the target process, subtract the RSS of the
: zygote process that is the parent of all Android apps") to reduce the
: accounting time, but it regularly overestimated the memory used by 20+
: percent. Accordingly, I don't think that there's a good alternative to
: using PSS.
:
: We started looking into PSS collection performance after we noticed random
: frequency spikes while a phone's screen was off; occasionally, one of the
: CPU clusters would ramp to a high frequency because there was 200-300ms of
: constant CPU work from a single thread in the main Android userspace
: process. The work causing the spike (which is reasonable governor
: behavior given the amount of CPU time needed) was always PSS collection.
: As a result, Android is burning more power than we should be on PSS
: collection.
:
: The other issue (and why I'm less sure about improving smaps as a
: long-term solution) is that the number of VMAs per process has increased
: significantly from release to release. After trying to figure out why we
: were seeing these 200-300ms PSS collection times on Android O but had not
: noticed it in previous versions, we found that the number of VMAs in the
: main system process increased by 50% from Android N to Android O (from
: ~1800 to ~2700) and varying increases in every userspace process. Android
: M to N also had an increase in the number of VMAs, although not as much.
: I'm not sure why this is increasing so much over time, but thinking about
: ASLR and ways to make ASLR better, I expect that this will continue to
: increase going forward. I would not be surprised if we hit 5000 VMAs on
: the main Android process (system_server) by 2020.
:
: If we assume that the number of VMAs is going to increase over time, then
: doing anything we can do to reduce the overhead of each VMA during PSS
: collection seems like the right way to go, and that means outputting an
: aggregate statistic (to avoid whatever overhead there is per line in
: writing smaps and in reading each line from userspace).
Link: http://lkml.kernel.org/r/20170812022148.178293-1-dancol@google.com
Signed-off-by: Daniel Colascione <dancol@google.com>
Cc: Tim Murray <timmurray@google.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:25:08 +00:00
|
|
|
return ret;
|
2005-09-03 22:55:10 +00:00
|
|
|
}
|
2018-04-10 23:31:16 +00:00
|
|
|
#undef SEQ_PUT_DEC
|
2005-09-03 22:55:10 +00:00
|
|
|
|
2008-02-08 12:21:19 +00:00
|
|
|
static const struct seq_operations proc_pid_smaps_op = {
|
2008-02-05 06:29:03 +00:00
|
|
|
.start = m_start,
|
|
|
|
.next = m_next,
|
|
|
|
.stop = m_stop,
|
2018-08-22 04:52:48 +00:00
|
|
|
.show = show_smap
|
2008-02-05 06:29:03 +00:00
|
|
|
};
|
|
|
|
|
procfs: mark thread stack correctly in proc/<pid>/maps
Stack for a new thread is mapped by userspace code and passed via
sys_clone. This memory is currently seen as anonymous in
/proc/<pid>/maps, which makes it difficult to ascertain which mappings
are being used for thread stacks. This patch uses the individual task
stack pointers to determine which vmas are actually thread stacks.
For a multithreaded program like the following:
#include <pthread.h>
void *thread_main(void *foo)
{
while(1);
}
int main()
{
pthread_t t;
pthread_create(&t, NULL, thread_main, NULL);
pthread_join(t, NULL);
}
proc/PID/maps looks like the following:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
Here, one could guess that 7f8a44492000-7f8a44c92000 is a stack since
the earlier vma that has no permissions (7f8a44e3d000-7f8a4503d000) but
that is not always a reliable way to find out which vma is a thread
stack. Also, /proc/PID/maps and /proc/PID/task/TID/maps has the same
content.
With this patch in place, /proc/PID/task/TID/maps are treated as 'maps
as the task would see it' and hence, only the vma that that task uses as
stack is marked as [stack]. All other 'stack' vmas are marked as
anonymous memory. /proc/PID/maps acts as a thread group level view,
where all thread stack vmas are marked as [stack:TID] where TID is the
process ID of the task that uses that vma as stack, while the process
stack is marked as [stack].
So /proc/PID/maps will look like this:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack:1442]
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
Thus marking all vmas that are used as stacks by the threads in the
thread group along with the process stack. The task level maps will
however like this:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack]
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
where only the vma that is being used as a stack by *that* task is
marked as [stack].
Analogous changes have been made to /proc/PID/smaps,
/proc/PID/numa_maps, /proc/PID/task/TID/smaps and
/proc/PID/task/TID/numa_maps. Relevant snippets from smaps and
numa_maps:
[siddhesh@localhost ~ ]$ pgrep a.out
1441
[siddhesh@localhost ~ ]$ cat /proc/1441/smaps | grep "\[stack"
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack:1442]
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1442/smaps | grep "\[stack"
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1441/smaps | grep "\[stack"
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/numa_maps | grep "stack"
7f8a44492000 default stack:1442 anon=2 dirty=2 N0=2
7fff6273a000 default stack anon=3 dirty=3 N0=3
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1442/numa_maps | grep "stack"
7f8a44492000 default stack anon=2 dirty=2 N0=2
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1441/numa_maps | grep "stack"
7fff6273a000 default stack anon=3 dirty=3 N0=3
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix build]
Signed-off-by: Siddhesh Poyarekar <siddhesh.poyarekar@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jamie Lokier <jamie@shareable.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:04 +00:00
|
|
|
static int pid_smaps_open(struct inode *inode, struct file *file)
|
2008-02-05 06:29:03 +00:00
|
|
|
{
|
|
|
|
return do_maps_open(inode, file, &proc_pid_smaps_op);
|
|
|
|
}
|
|
|
|
|
mm: /proc/pid/smaps_rollup: convert to single value seq_file
The /proc/pid/smaps_rollup file is currently implemented via the
m_start/m_next/m_stop seq_file iterators shared with the other maps files,
that iterate over vma's. However, the rollup file doesn't print anything
for each vma, only accumulate the stats.
There are some issues with the current code as reported in [1] - the
accumulated stats can get skewed if seq_file start()/stop() op is called
multiple times, if show() is called multiple times, and after seeks to
non-zero position.
Patch [1] fixed those within existing design, but I believe it is
fundamentally wrong to expose the vma iterators to the seq_file mechanism
when smaps_rollup shows logically a single set of values for the whole
address space.
This patch thus refactors the code to provide a single "value" at offset
0, with vma iteration to gather the stats done internally. This fixes the
situations where results are skewed, and simplifies the code, especially
in show_smap(), at the expense of somewhat less code reuse.
[1] https://marc.info/?l=linux-mm&m=151927723128134&w=2
[vbabka@suse.c: use seq_file infrastructure]
Link: http://lkml.kernel.org/r/bf4525b0-fd5b-4c4c-2cb3-adee3dd95a48@suse.cz
Link: http://lkml.kernel.org/r/20180723111933.15443-5-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Daniel Colascione <dancol@google.com>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 04:52:59 +00:00
|
|
|
static int smaps_rollup_open(struct inode *inode, struct file *file)
|
mm: add /proc/pid/smaps_rollup
/proc/pid/smaps_rollup is a new proc file that improves the performance
of user programs that determine aggregate memory statistics (e.g., total
PSS) of a process.
Android regularly "samples" the memory usage of various processes in
order to balance its memory pool sizes. This sampling process involves
opening /proc/pid/smaps and summing certain fields. For very large
processes, sampling memory use this way can take several hundred
milliseconds, due mostly to the overhead of the seq_printf calls in
task_mmu.c.
smaps_rollup improves the situation. It contains most of the fields of
/proc/pid/smaps, but instead of a set of fields for each VMA,
smaps_rollup instead contains one synthetic smaps-format entry
representing the whole process. In the single smaps_rollup synthetic
entry, each field is the summation of the corresponding field in all of
the real-smaps VMAs. Using a common format for smaps_rollup and smaps
allows userspace parsers to repurpose parsers meant for use with
non-rollup smaps for smaps_rollup, and it allows userspace to switch
between smaps_rollup and smaps at runtime (say, based on the
availability of smaps_rollup in a given kernel) with minimal fuss.
By using smaps_rollup instead of smaps, a caller can avoid the
significant overhead of formatting, reading, and parsing each of a large
process's potentially very numerous memory mappings. For sampling
system_server's PSS in Android, we measured a 12x speedup, representing
a savings of several hundred milliseconds.
One alternative to a new per-process proc file would have been including
PSS information in /proc/pid/status. We considered this option but
thought that PSS would be too expensive (by a few orders of magnitude)
to collect relative to what's already emitted as part of
/proc/pid/status, and slowing every user of /proc/pid/status for the
sake of readers that happen to want PSS feels wrong.
The code itself works by reusing the existing VMA-walking framework we
use for regular smaps generation and keeping the mem_size_stats
structure around between VMA walks instead of using a fresh one for each
VMA. In this way, summation happens automatically. We let seq_file
walk over the VMAs just as it does for regular smaps and just emit
nothing to the seq_file until we hit the last VMA.
Benchmarks:
using smaps:
iterations:1000 pid:1163 pss:220023808
0m29.46s real 0m08.28s user 0m20.98s system
using smaps_rollup:
iterations:1000 pid:1163 pss:220702720
0m04.39s real 0m00.03s user 0m04.31s system
We're using the PSS samples we collect asynchronously for
system-management tasks like fine-tuning oom_adj_score, memory use
tracking for debugging, application-level memory-use attribution, and
deciding whether we want to kill large processes during system idle
maintenance windows. Android has been using PSS for these purposes for
a long time; as the average process VMA count has increased and and
devices become more efficiency-conscious, PSS-collection inefficiency
has started to matter more. IMHO, it'd be a lot safer to optimize the
existing PSS-collection model, which has been fine-tuned over the years,
instead of changing the memory tracking approach entirely to work around
smaps-generation inefficiency.
Tim said:
: There are two main reasons why Android gathers PSS information:
:
: 1. Android devices can show the user the amount of memory used per
: application via the settings app. This is a less important use case.
:
: 2. We log PSS to help identify leaks in applications. We have found
: an enormous number of bugs (in the Android platform, in Google's own
: apps, and in third-party applications) using this data.
:
: To do this, system_server (the main process in Android userspace) will
: sample the PSS of a process three seconds after it changes state (for
: example, app is launched and becomes the foreground application) and about
: every ten minutes after that. The net result is that PSS collection is
: regularly running on at least one process in the system (usually a few
: times a minute while the screen is on, less when screen is off due to
: suspend). PSS of a process is an incredibly useful stat to track, and we
: aren't going to get rid of it. We've looked at some very hacky approaches
: using RSS ("take the RSS of the target process, subtract the RSS of the
: zygote process that is the parent of all Android apps") to reduce the
: accounting time, but it regularly overestimated the memory used by 20+
: percent. Accordingly, I don't think that there's a good alternative to
: using PSS.
:
: We started looking into PSS collection performance after we noticed random
: frequency spikes while a phone's screen was off; occasionally, one of the
: CPU clusters would ramp to a high frequency because there was 200-300ms of
: constant CPU work from a single thread in the main Android userspace
: process. The work causing the spike (which is reasonable governor
: behavior given the amount of CPU time needed) was always PSS collection.
: As a result, Android is burning more power than we should be on PSS
: collection.
:
: The other issue (and why I'm less sure about improving smaps as a
: long-term solution) is that the number of VMAs per process has increased
: significantly from release to release. After trying to figure out why we
: were seeing these 200-300ms PSS collection times on Android O but had not
: noticed it in previous versions, we found that the number of VMAs in the
: main system process increased by 50% from Android N to Android O (from
: ~1800 to ~2700) and varying increases in every userspace process. Android
: M to N also had an increase in the number of VMAs, although not as much.
: I'm not sure why this is increasing so much over time, but thinking about
: ASLR and ways to make ASLR better, I expect that this will continue to
: increase going forward. I would not be surprised if we hit 5000 VMAs on
: the main Android process (system_server) by 2020.
:
: If we assume that the number of VMAs is going to increase over time, then
: doing anything we can do to reduce the overhead of each VMA during PSS
: collection seems like the right way to go, and that means outputting an
: aggregate statistic (to avoid whatever overhead there is per line in
: writing smaps and in reading each line from userspace).
Link: http://lkml.kernel.org/r/20170812022148.178293-1-dancol@google.com
Signed-off-by: Daniel Colascione <dancol@google.com>
Cc: Tim Murray <timmurray@google.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:25:08 +00:00
|
|
|
{
|
mm: /proc/pid/smaps_rollup: convert to single value seq_file
The /proc/pid/smaps_rollup file is currently implemented via the
m_start/m_next/m_stop seq_file iterators shared with the other maps files,
that iterate over vma's. However, the rollup file doesn't print anything
for each vma, only accumulate the stats.
There are some issues with the current code as reported in [1] - the
accumulated stats can get skewed if seq_file start()/stop() op is called
multiple times, if show() is called multiple times, and after seeks to
non-zero position.
Patch [1] fixed those within existing design, but I believe it is
fundamentally wrong to expose the vma iterators to the seq_file mechanism
when smaps_rollup shows logically a single set of values for the whole
address space.
This patch thus refactors the code to provide a single "value" at offset
0, with vma iteration to gather the stats done internally. This fixes the
situations where results are skewed, and simplifies the code, especially
in show_smap(), at the expense of somewhat less code reuse.
[1] https://marc.info/?l=linux-mm&m=151927723128134&w=2
[vbabka@suse.c: use seq_file infrastructure]
Link: http://lkml.kernel.org/r/bf4525b0-fd5b-4c4c-2cb3-adee3dd95a48@suse.cz
Link: http://lkml.kernel.org/r/20180723111933.15443-5-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Daniel Colascione <dancol@google.com>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 04:52:59 +00:00
|
|
|
int ret;
|
mm: add /proc/pid/smaps_rollup
/proc/pid/smaps_rollup is a new proc file that improves the performance
of user programs that determine aggregate memory statistics (e.g., total
PSS) of a process.
Android regularly "samples" the memory usage of various processes in
order to balance its memory pool sizes. This sampling process involves
opening /proc/pid/smaps and summing certain fields. For very large
processes, sampling memory use this way can take several hundred
milliseconds, due mostly to the overhead of the seq_printf calls in
task_mmu.c.
smaps_rollup improves the situation. It contains most of the fields of
/proc/pid/smaps, but instead of a set of fields for each VMA,
smaps_rollup instead contains one synthetic smaps-format entry
representing the whole process. In the single smaps_rollup synthetic
entry, each field is the summation of the corresponding field in all of
the real-smaps VMAs. Using a common format for smaps_rollup and smaps
allows userspace parsers to repurpose parsers meant for use with
non-rollup smaps for smaps_rollup, and it allows userspace to switch
between smaps_rollup and smaps at runtime (say, based on the
availability of smaps_rollup in a given kernel) with minimal fuss.
By using smaps_rollup instead of smaps, a caller can avoid the
significant overhead of formatting, reading, and parsing each of a large
process's potentially very numerous memory mappings. For sampling
system_server's PSS in Android, we measured a 12x speedup, representing
a savings of several hundred milliseconds.
One alternative to a new per-process proc file would have been including
PSS information in /proc/pid/status. We considered this option but
thought that PSS would be too expensive (by a few orders of magnitude)
to collect relative to what's already emitted as part of
/proc/pid/status, and slowing every user of /proc/pid/status for the
sake of readers that happen to want PSS feels wrong.
The code itself works by reusing the existing VMA-walking framework we
use for regular smaps generation and keeping the mem_size_stats
structure around between VMA walks instead of using a fresh one for each
VMA. In this way, summation happens automatically. We let seq_file
walk over the VMAs just as it does for regular smaps and just emit
nothing to the seq_file until we hit the last VMA.
Benchmarks:
using smaps:
iterations:1000 pid:1163 pss:220023808
0m29.46s real 0m08.28s user 0m20.98s system
using smaps_rollup:
iterations:1000 pid:1163 pss:220702720
0m04.39s real 0m00.03s user 0m04.31s system
We're using the PSS samples we collect asynchronously for
system-management tasks like fine-tuning oom_adj_score, memory use
tracking for debugging, application-level memory-use attribution, and
deciding whether we want to kill large processes during system idle
maintenance windows. Android has been using PSS for these purposes for
a long time; as the average process VMA count has increased and and
devices become more efficiency-conscious, PSS-collection inefficiency
has started to matter more. IMHO, it'd be a lot safer to optimize the
existing PSS-collection model, which has been fine-tuned over the years,
instead of changing the memory tracking approach entirely to work around
smaps-generation inefficiency.
Tim said:
: There are two main reasons why Android gathers PSS information:
:
: 1. Android devices can show the user the amount of memory used per
: application via the settings app. This is a less important use case.
:
: 2. We log PSS to help identify leaks in applications. We have found
: an enormous number of bugs (in the Android platform, in Google's own
: apps, and in third-party applications) using this data.
:
: To do this, system_server (the main process in Android userspace) will
: sample the PSS of a process three seconds after it changes state (for
: example, app is launched and becomes the foreground application) and about
: every ten minutes after that. The net result is that PSS collection is
: regularly running on at least one process in the system (usually a few
: times a minute while the screen is on, less when screen is off due to
: suspend). PSS of a process is an incredibly useful stat to track, and we
: aren't going to get rid of it. We've looked at some very hacky approaches
: using RSS ("take the RSS of the target process, subtract the RSS of the
: zygote process that is the parent of all Android apps") to reduce the
: accounting time, but it regularly overestimated the memory used by 20+
: percent. Accordingly, I don't think that there's a good alternative to
: using PSS.
:
: We started looking into PSS collection performance after we noticed random
: frequency spikes while a phone's screen was off; occasionally, one of the
: CPU clusters would ramp to a high frequency because there was 200-300ms of
: constant CPU work from a single thread in the main Android userspace
: process. The work causing the spike (which is reasonable governor
: behavior given the amount of CPU time needed) was always PSS collection.
: As a result, Android is burning more power than we should be on PSS
: collection.
:
: The other issue (and why I'm less sure about improving smaps as a
: long-term solution) is that the number of VMAs per process has increased
: significantly from release to release. After trying to figure out why we
: were seeing these 200-300ms PSS collection times on Android O but had not
: noticed it in previous versions, we found that the number of VMAs in the
: main system process increased by 50% from Android N to Android O (from
: ~1800 to ~2700) and varying increases in every userspace process. Android
: M to N also had an increase in the number of VMAs, although not as much.
: I'm not sure why this is increasing so much over time, but thinking about
: ASLR and ways to make ASLR better, I expect that this will continue to
: increase going forward. I would not be surprised if we hit 5000 VMAs on
: the main Android process (system_server) by 2020.
:
: If we assume that the number of VMAs is going to increase over time, then
: doing anything we can do to reduce the overhead of each VMA during PSS
: collection seems like the right way to go, and that means outputting an
: aggregate statistic (to avoid whatever overhead there is per line in
: writing smaps and in reading each line from userspace).
Link: http://lkml.kernel.org/r/20170812022148.178293-1-dancol@google.com
Signed-off-by: Daniel Colascione <dancol@google.com>
Cc: Tim Murray <timmurray@google.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:25:08 +00:00
|
|
|
struct proc_maps_private *priv;
|
mm: /proc/pid/smaps_rollup: convert to single value seq_file
The /proc/pid/smaps_rollup file is currently implemented via the
m_start/m_next/m_stop seq_file iterators shared with the other maps files,
that iterate over vma's. However, the rollup file doesn't print anything
for each vma, only accumulate the stats.
There are some issues with the current code as reported in [1] - the
accumulated stats can get skewed if seq_file start()/stop() op is called
multiple times, if show() is called multiple times, and after seeks to
non-zero position.
Patch [1] fixed those within existing design, but I believe it is
fundamentally wrong to expose the vma iterators to the seq_file mechanism
when smaps_rollup shows logically a single set of values for the whole
address space.
This patch thus refactors the code to provide a single "value" at offset
0, with vma iteration to gather the stats done internally. This fixes the
situations where results are skewed, and simplifies the code, especially
in show_smap(), at the expense of somewhat less code reuse.
[1] https://marc.info/?l=linux-mm&m=151927723128134&w=2
[vbabka@suse.c: use seq_file infrastructure]
Link: http://lkml.kernel.org/r/bf4525b0-fd5b-4c4c-2cb3-adee3dd95a48@suse.cz
Link: http://lkml.kernel.org/r/20180723111933.15443-5-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Daniel Colascione <dancol@google.com>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 04:52:59 +00:00
|
|
|
|
|
|
|
priv = kzalloc(sizeof(*priv), GFP_KERNEL_ACCOUNT);
|
|
|
|
if (!priv)
|
mm: add /proc/pid/smaps_rollup
/proc/pid/smaps_rollup is a new proc file that improves the performance
of user programs that determine aggregate memory statistics (e.g., total
PSS) of a process.
Android regularly "samples" the memory usage of various processes in
order to balance its memory pool sizes. This sampling process involves
opening /proc/pid/smaps and summing certain fields. For very large
processes, sampling memory use this way can take several hundred
milliseconds, due mostly to the overhead of the seq_printf calls in
task_mmu.c.
smaps_rollup improves the situation. It contains most of the fields of
/proc/pid/smaps, but instead of a set of fields for each VMA,
smaps_rollup instead contains one synthetic smaps-format entry
representing the whole process. In the single smaps_rollup synthetic
entry, each field is the summation of the corresponding field in all of
the real-smaps VMAs. Using a common format for smaps_rollup and smaps
allows userspace parsers to repurpose parsers meant for use with
non-rollup smaps for smaps_rollup, and it allows userspace to switch
between smaps_rollup and smaps at runtime (say, based on the
availability of smaps_rollup in a given kernel) with minimal fuss.
By using smaps_rollup instead of smaps, a caller can avoid the
significant overhead of formatting, reading, and parsing each of a large
process's potentially very numerous memory mappings. For sampling
system_server's PSS in Android, we measured a 12x speedup, representing
a savings of several hundred milliseconds.
One alternative to a new per-process proc file would have been including
PSS information in /proc/pid/status. We considered this option but
thought that PSS would be too expensive (by a few orders of magnitude)
to collect relative to what's already emitted as part of
/proc/pid/status, and slowing every user of /proc/pid/status for the
sake of readers that happen to want PSS feels wrong.
The code itself works by reusing the existing VMA-walking framework we
use for regular smaps generation and keeping the mem_size_stats
structure around between VMA walks instead of using a fresh one for each
VMA. In this way, summation happens automatically. We let seq_file
walk over the VMAs just as it does for regular smaps and just emit
nothing to the seq_file until we hit the last VMA.
Benchmarks:
using smaps:
iterations:1000 pid:1163 pss:220023808
0m29.46s real 0m08.28s user 0m20.98s system
using smaps_rollup:
iterations:1000 pid:1163 pss:220702720
0m04.39s real 0m00.03s user 0m04.31s system
We're using the PSS samples we collect asynchronously for
system-management tasks like fine-tuning oom_adj_score, memory use
tracking for debugging, application-level memory-use attribution, and
deciding whether we want to kill large processes during system idle
maintenance windows. Android has been using PSS for these purposes for
a long time; as the average process VMA count has increased and and
devices become more efficiency-conscious, PSS-collection inefficiency
has started to matter more. IMHO, it'd be a lot safer to optimize the
existing PSS-collection model, which has been fine-tuned over the years,
instead of changing the memory tracking approach entirely to work around
smaps-generation inefficiency.
Tim said:
: There are two main reasons why Android gathers PSS information:
:
: 1. Android devices can show the user the amount of memory used per
: application via the settings app. This is a less important use case.
:
: 2. We log PSS to help identify leaks in applications. We have found
: an enormous number of bugs (in the Android platform, in Google's own
: apps, and in third-party applications) using this data.
:
: To do this, system_server (the main process in Android userspace) will
: sample the PSS of a process three seconds after it changes state (for
: example, app is launched and becomes the foreground application) and about
: every ten minutes after that. The net result is that PSS collection is
: regularly running on at least one process in the system (usually a few
: times a minute while the screen is on, less when screen is off due to
: suspend). PSS of a process is an incredibly useful stat to track, and we
: aren't going to get rid of it. We've looked at some very hacky approaches
: using RSS ("take the RSS of the target process, subtract the RSS of the
: zygote process that is the parent of all Android apps") to reduce the
: accounting time, but it regularly overestimated the memory used by 20+
: percent. Accordingly, I don't think that there's a good alternative to
: using PSS.
:
: We started looking into PSS collection performance after we noticed random
: frequency spikes while a phone's screen was off; occasionally, one of the
: CPU clusters would ramp to a high frequency because there was 200-300ms of
: constant CPU work from a single thread in the main Android userspace
: process. The work causing the spike (which is reasonable governor
: behavior given the amount of CPU time needed) was always PSS collection.
: As a result, Android is burning more power than we should be on PSS
: collection.
:
: The other issue (and why I'm less sure about improving smaps as a
: long-term solution) is that the number of VMAs per process has increased
: significantly from release to release. After trying to figure out why we
: were seeing these 200-300ms PSS collection times on Android O but had not
: noticed it in previous versions, we found that the number of VMAs in the
: main system process increased by 50% from Android N to Android O (from
: ~1800 to ~2700) and varying increases in every userspace process. Android
: M to N also had an increase in the number of VMAs, although not as much.
: I'm not sure why this is increasing so much over time, but thinking about
: ASLR and ways to make ASLR better, I expect that this will continue to
: increase going forward. I would not be surprised if we hit 5000 VMAs on
: the main Android process (system_server) by 2020.
:
: If we assume that the number of VMAs is going to increase over time, then
: doing anything we can do to reduce the overhead of each VMA during PSS
: collection seems like the right way to go, and that means outputting an
: aggregate statistic (to avoid whatever overhead there is per line in
: writing smaps and in reading each line from userspace).
Link: http://lkml.kernel.org/r/20170812022148.178293-1-dancol@google.com
Signed-off-by: Daniel Colascione <dancol@google.com>
Cc: Tim Murray <timmurray@google.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:25:08 +00:00
|
|
|
return -ENOMEM;
|
mm: /proc/pid/smaps_rollup: convert to single value seq_file
The /proc/pid/smaps_rollup file is currently implemented via the
m_start/m_next/m_stop seq_file iterators shared with the other maps files,
that iterate over vma's. However, the rollup file doesn't print anything
for each vma, only accumulate the stats.
There are some issues with the current code as reported in [1] - the
accumulated stats can get skewed if seq_file start()/stop() op is called
multiple times, if show() is called multiple times, and after seeks to
non-zero position.
Patch [1] fixed those within existing design, but I believe it is
fundamentally wrong to expose the vma iterators to the seq_file mechanism
when smaps_rollup shows logically a single set of values for the whole
address space.
This patch thus refactors the code to provide a single "value" at offset
0, with vma iteration to gather the stats done internally. This fixes the
situations where results are skewed, and simplifies the code, especially
in show_smap(), at the expense of somewhat less code reuse.
[1] https://marc.info/?l=linux-mm&m=151927723128134&w=2
[vbabka@suse.c: use seq_file infrastructure]
Link: http://lkml.kernel.org/r/bf4525b0-fd5b-4c4c-2cb3-adee3dd95a48@suse.cz
Link: http://lkml.kernel.org/r/20180723111933.15443-5-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Daniel Colascione <dancol@google.com>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 04:52:59 +00:00
|
|
|
|
|
|
|
ret = single_open(file, show_smaps_rollup, priv);
|
|
|
|
if (ret)
|
|
|
|
goto out_free;
|
|
|
|
|
|
|
|
priv->inode = inode;
|
|
|
|
priv->mm = proc_mem_open(inode, PTRACE_MODE_READ);
|
|
|
|
if (IS_ERR(priv->mm)) {
|
|
|
|
ret = PTR_ERR(priv->mm);
|
|
|
|
|
|
|
|
single_release(inode, file);
|
|
|
|
goto out_free;
|
mm: add /proc/pid/smaps_rollup
/proc/pid/smaps_rollup is a new proc file that improves the performance
of user programs that determine aggregate memory statistics (e.g., total
PSS) of a process.
Android regularly "samples" the memory usage of various processes in
order to balance its memory pool sizes. This sampling process involves
opening /proc/pid/smaps and summing certain fields. For very large
processes, sampling memory use this way can take several hundred
milliseconds, due mostly to the overhead of the seq_printf calls in
task_mmu.c.
smaps_rollup improves the situation. It contains most of the fields of
/proc/pid/smaps, but instead of a set of fields for each VMA,
smaps_rollup instead contains one synthetic smaps-format entry
representing the whole process. In the single smaps_rollup synthetic
entry, each field is the summation of the corresponding field in all of
the real-smaps VMAs. Using a common format for smaps_rollup and smaps
allows userspace parsers to repurpose parsers meant for use with
non-rollup smaps for smaps_rollup, and it allows userspace to switch
between smaps_rollup and smaps at runtime (say, based on the
availability of smaps_rollup in a given kernel) with minimal fuss.
By using smaps_rollup instead of smaps, a caller can avoid the
significant overhead of formatting, reading, and parsing each of a large
process's potentially very numerous memory mappings. For sampling
system_server's PSS in Android, we measured a 12x speedup, representing
a savings of several hundred milliseconds.
One alternative to a new per-process proc file would have been including
PSS information in /proc/pid/status. We considered this option but
thought that PSS would be too expensive (by a few orders of magnitude)
to collect relative to what's already emitted as part of
/proc/pid/status, and slowing every user of /proc/pid/status for the
sake of readers that happen to want PSS feels wrong.
The code itself works by reusing the existing VMA-walking framework we
use for regular smaps generation and keeping the mem_size_stats
structure around between VMA walks instead of using a fresh one for each
VMA. In this way, summation happens automatically. We let seq_file
walk over the VMAs just as it does for regular smaps and just emit
nothing to the seq_file until we hit the last VMA.
Benchmarks:
using smaps:
iterations:1000 pid:1163 pss:220023808
0m29.46s real 0m08.28s user 0m20.98s system
using smaps_rollup:
iterations:1000 pid:1163 pss:220702720
0m04.39s real 0m00.03s user 0m04.31s system
We're using the PSS samples we collect asynchronously for
system-management tasks like fine-tuning oom_adj_score, memory use
tracking for debugging, application-level memory-use attribution, and
deciding whether we want to kill large processes during system idle
maintenance windows. Android has been using PSS for these purposes for
a long time; as the average process VMA count has increased and and
devices become more efficiency-conscious, PSS-collection inefficiency
has started to matter more. IMHO, it'd be a lot safer to optimize the
existing PSS-collection model, which has been fine-tuned over the years,
instead of changing the memory tracking approach entirely to work around
smaps-generation inefficiency.
Tim said:
: There are two main reasons why Android gathers PSS information:
:
: 1. Android devices can show the user the amount of memory used per
: application via the settings app. This is a less important use case.
:
: 2. We log PSS to help identify leaks in applications. We have found
: an enormous number of bugs (in the Android platform, in Google's own
: apps, and in third-party applications) using this data.
:
: To do this, system_server (the main process in Android userspace) will
: sample the PSS of a process three seconds after it changes state (for
: example, app is launched and becomes the foreground application) and about
: every ten minutes after that. The net result is that PSS collection is
: regularly running on at least one process in the system (usually a few
: times a minute while the screen is on, less when screen is off due to
: suspend). PSS of a process is an incredibly useful stat to track, and we
: aren't going to get rid of it. We've looked at some very hacky approaches
: using RSS ("take the RSS of the target process, subtract the RSS of the
: zygote process that is the parent of all Android apps") to reduce the
: accounting time, but it regularly overestimated the memory used by 20+
: percent. Accordingly, I don't think that there's a good alternative to
: using PSS.
:
: We started looking into PSS collection performance after we noticed random
: frequency spikes while a phone's screen was off; occasionally, one of the
: CPU clusters would ramp to a high frequency because there was 200-300ms of
: constant CPU work from a single thread in the main Android userspace
: process. The work causing the spike (which is reasonable governor
: behavior given the amount of CPU time needed) was always PSS collection.
: As a result, Android is burning more power than we should be on PSS
: collection.
:
: The other issue (and why I'm less sure about improving smaps as a
: long-term solution) is that the number of VMAs per process has increased
: significantly from release to release. After trying to figure out why we
: were seeing these 200-300ms PSS collection times on Android O but had not
: noticed it in previous versions, we found that the number of VMAs in the
: main system process increased by 50% from Android N to Android O (from
: ~1800 to ~2700) and varying increases in every userspace process. Android
: M to N also had an increase in the number of VMAs, although not as much.
: I'm not sure why this is increasing so much over time, but thinking about
: ASLR and ways to make ASLR better, I expect that this will continue to
: increase going forward. I would not be surprised if we hit 5000 VMAs on
: the main Android process (system_server) by 2020.
:
: If we assume that the number of VMAs is going to increase over time, then
: doing anything we can do to reduce the overhead of each VMA during PSS
: collection seems like the right way to go, and that means outputting an
: aggregate statistic (to avoid whatever overhead there is per line in
: writing smaps and in reading each line from userspace).
Link: http://lkml.kernel.org/r/20170812022148.178293-1-dancol@google.com
Signed-off-by: Daniel Colascione <dancol@google.com>
Cc: Tim Murray <timmurray@google.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:25:08 +00:00
|
|
|
}
|
mm: /proc/pid/smaps_rollup: convert to single value seq_file
The /proc/pid/smaps_rollup file is currently implemented via the
m_start/m_next/m_stop seq_file iterators shared with the other maps files,
that iterate over vma's. However, the rollup file doesn't print anything
for each vma, only accumulate the stats.
There are some issues with the current code as reported in [1] - the
accumulated stats can get skewed if seq_file start()/stop() op is called
multiple times, if show() is called multiple times, and after seeks to
non-zero position.
Patch [1] fixed those within existing design, but I believe it is
fundamentally wrong to expose the vma iterators to the seq_file mechanism
when smaps_rollup shows logically a single set of values for the whole
address space.
This patch thus refactors the code to provide a single "value" at offset
0, with vma iteration to gather the stats done internally. This fixes the
situations where results are skewed, and simplifies the code, especially
in show_smap(), at the expense of somewhat less code reuse.
[1] https://marc.info/?l=linux-mm&m=151927723128134&w=2
[vbabka@suse.c: use seq_file infrastructure]
Link: http://lkml.kernel.org/r/bf4525b0-fd5b-4c4c-2cb3-adee3dd95a48@suse.cz
Link: http://lkml.kernel.org/r/20180723111933.15443-5-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Daniel Colascione <dancol@google.com>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 04:52:59 +00:00
|
|
|
|
mm: add /proc/pid/smaps_rollup
/proc/pid/smaps_rollup is a new proc file that improves the performance
of user programs that determine aggregate memory statistics (e.g., total
PSS) of a process.
Android regularly "samples" the memory usage of various processes in
order to balance its memory pool sizes. This sampling process involves
opening /proc/pid/smaps and summing certain fields. For very large
processes, sampling memory use this way can take several hundred
milliseconds, due mostly to the overhead of the seq_printf calls in
task_mmu.c.
smaps_rollup improves the situation. It contains most of the fields of
/proc/pid/smaps, but instead of a set of fields for each VMA,
smaps_rollup instead contains one synthetic smaps-format entry
representing the whole process. In the single smaps_rollup synthetic
entry, each field is the summation of the corresponding field in all of
the real-smaps VMAs. Using a common format for smaps_rollup and smaps
allows userspace parsers to repurpose parsers meant for use with
non-rollup smaps for smaps_rollup, and it allows userspace to switch
between smaps_rollup and smaps at runtime (say, based on the
availability of smaps_rollup in a given kernel) with minimal fuss.
By using smaps_rollup instead of smaps, a caller can avoid the
significant overhead of formatting, reading, and parsing each of a large
process's potentially very numerous memory mappings. For sampling
system_server's PSS in Android, we measured a 12x speedup, representing
a savings of several hundred milliseconds.
One alternative to a new per-process proc file would have been including
PSS information in /proc/pid/status. We considered this option but
thought that PSS would be too expensive (by a few orders of magnitude)
to collect relative to what's already emitted as part of
/proc/pid/status, and slowing every user of /proc/pid/status for the
sake of readers that happen to want PSS feels wrong.
The code itself works by reusing the existing VMA-walking framework we
use for regular smaps generation and keeping the mem_size_stats
structure around between VMA walks instead of using a fresh one for each
VMA. In this way, summation happens automatically. We let seq_file
walk over the VMAs just as it does for regular smaps and just emit
nothing to the seq_file until we hit the last VMA.
Benchmarks:
using smaps:
iterations:1000 pid:1163 pss:220023808
0m29.46s real 0m08.28s user 0m20.98s system
using smaps_rollup:
iterations:1000 pid:1163 pss:220702720
0m04.39s real 0m00.03s user 0m04.31s system
We're using the PSS samples we collect asynchronously for
system-management tasks like fine-tuning oom_adj_score, memory use
tracking for debugging, application-level memory-use attribution, and
deciding whether we want to kill large processes during system idle
maintenance windows. Android has been using PSS for these purposes for
a long time; as the average process VMA count has increased and and
devices become more efficiency-conscious, PSS-collection inefficiency
has started to matter more. IMHO, it'd be a lot safer to optimize the
existing PSS-collection model, which has been fine-tuned over the years,
instead of changing the memory tracking approach entirely to work around
smaps-generation inefficiency.
Tim said:
: There are two main reasons why Android gathers PSS information:
:
: 1. Android devices can show the user the amount of memory used per
: application via the settings app. This is a less important use case.
:
: 2. We log PSS to help identify leaks in applications. We have found
: an enormous number of bugs (in the Android platform, in Google's own
: apps, and in third-party applications) using this data.
:
: To do this, system_server (the main process in Android userspace) will
: sample the PSS of a process three seconds after it changes state (for
: example, app is launched and becomes the foreground application) and about
: every ten minutes after that. The net result is that PSS collection is
: regularly running on at least one process in the system (usually a few
: times a minute while the screen is on, less when screen is off due to
: suspend). PSS of a process is an incredibly useful stat to track, and we
: aren't going to get rid of it. We've looked at some very hacky approaches
: using RSS ("take the RSS of the target process, subtract the RSS of the
: zygote process that is the parent of all Android apps") to reduce the
: accounting time, but it regularly overestimated the memory used by 20+
: percent. Accordingly, I don't think that there's a good alternative to
: using PSS.
:
: We started looking into PSS collection performance after we noticed random
: frequency spikes while a phone's screen was off; occasionally, one of the
: CPU clusters would ramp to a high frequency because there was 200-300ms of
: constant CPU work from a single thread in the main Android userspace
: process. The work causing the spike (which is reasonable governor
: behavior given the amount of CPU time needed) was always PSS collection.
: As a result, Android is burning more power than we should be on PSS
: collection.
:
: The other issue (and why I'm less sure about improving smaps as a
: long-term solution) is that the number of VMAs per process has increased
: significantly from release to release. After trying to figure out why we
: were seeing these 200-300ms PSS collection times on Android O but had not
: noticed it in previous versions, we found that the number of VMAs in the
: main system process increased by 50% from Android N to Android O (from
: ~1800 to ~2700) and varying increases in every userspace process. Android
: M to N also had an increase in the number of VMAs, although not as much.
: I'm not sure why this is increasing so much over time, but thinking about
: ASLR and ways to make ASLR better, I expect that this will continue to
: increase going forward. I would not be surprised if we hit 5000 VMAs on
: the main Android process (system_server) by 2020.
:
: If we assume that the number of VMAs is going to increase over time, then
: doing anything we can do to reduce the overhead of each VMA during PSS
: collection seems like the right way to go, and that means outputting an
: aggregate statistic (to avoid whatever overhead there is per line in
: writing smaps and in reading each line from userspace).
Link: http://lkml.kernel.org/r/20170812022148.178293-1-dancol@google.com
Signed-off-by: Daniel Colascione <dancol@google.com>
Cc: Tim Murray <timmurray@google.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:25:08 +00:00
|
|
|
return 0;
|
mm: /proc/pid/smaps_rollup: convert to single value seq_file
The /proc/pid/smaps_rollup file is currently implemented via the
m_start/m_next/m_stop seq_file iterators shared with the other maps files,
that iterate over vma's. However, the rollup file doesn't print anything
for each vma, only accumulate the stats.
There are some issues with the current code as reported in [1] - the
accumulated stats can get skewed if seq_file start()/stop() op is called
multiple times, if show() is called multiple times, and after seeks to
non-zero position.
Patch [1] fixed those within existing design, but I believe it is
fundamentally wrong to expose the vma iterators to the seq_file mechanism
when smaps_rollup shows logically a single set of values for the whole
address space.
This patch thus refactors the code to provide a single "value" at offset
0, with vma iteration to gather the stats done internally. This fixes the
situations where results are skewed, and simplifies the code, especially
in show_smap(), at the expense of somewhat less code reuse.
[1] https://marc.info/?l=linux-mm&m=151927723128134&w=2
[vbabka@suse.c: use seq_file infrastructure]
Link: http://lkml.kernel.org/r/bf4525b0-fd5b-4c4c-2cb3-adee3dd95a48@suse.cz
Link: http://lkml.kernel.org/r/20180723111933.15443-5-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Daniel Colascione <dancol@google.com>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 04:52:59 +00:00
|
|
|
|
|
|
|
out_free:
|
|
|
|
kfree(priv);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int smaps_rollup_release(struct inode *inode, struct file *file)
|
|
|
|
{
|
|
|
|
struct seq_file *seq = file->private_data;
|
|
|
|
struct proc_maps_private *priv = seq->private;
|
|
|
|
|
|
|
|
if (priv->mm)
|
|
|
|
mmdrop(priv->mm);
|
|
|
|
|
|
|
|
kfree(priv);
|
|
|
|
return single_release(inode, file);
|
mm: add /proc/pid/smaps_rollup
/proc/pid/smaps_rollup is a new proc file that improves the performance
of user programs that determine aggregate memory statistics (e.g., total
PSS) of a process.
Android regularly "samples" the memory usage of various processes in
order to balance its memory pool sizes. This sampling process involves
opening /proc/pid/smaps and summing certain fields. For very large
processes, sampling memory use this way can take several hundred
milliseconds, due mostly to the overhead of the seq_printf calls in
task_mmu.c.
smaps_rollup improves the situation. It contains most of the fields of
/proc/pid/smaps, but instead of a set of fields for each VMA,
smaps_rollup instead contains one synthetic smaps-format entry
representing the whole process. In the single smaps_rollup synthetic
entry, each field is the summation of the corresponding field in all of
the real-smaps VMAs. Using a common format for smaps_rollup and smaps
allows userspace parsers to repurpose parsers meant for use with
non-rollup smaps for smaps_rollup, and it allows userspace to switch
between smaps_rollup and smaps at runtime (say, based on the
availability of smaps_rollup in a given kernel) with minimal fuss.
By using smaps_rollup instead of smaps, a caller can avoid the
significant overhead of formatting, reading, and parsing each of a large
process's potentially very numerous memory mappings. For sampling
system_server's PSS in Android, we measured a 12x speedup, representing
a savings of several hundred milliseconds.
One alternative to a new per-process proc file would have been including
PSS information in /proc/pid/status. We considered this option but
thought that PSS would be too expensive (by a few orders of magnitude)
to collect relative to what's already emitted as part of
/proc/pid/status, and slowing every user of /proc/pid/status for the
sake of readers that happen to want PSS feels wrong.
The code itself works by reusing the existing VMA-walking framework we
use for regular smaps generation and keeping the mem_size_stats
structure around between VMA walks instead of using a fresh one for each
VMA. In this way, summation happens automatically. We let seq_file
walk over the VMAs just as it does for regular smaps and just emit
nothing to the seq_file until we hit the last VMA.
Benchmarks:
using smaps:
iterations:1000 pid:1163 pss:220023808
0m29.46s real 0m08.28s user 0m20.98s system
using smaps_rollup:
iterations:1000 pid:1163 pss:220702720
0m04.39s real 0m00.03s user 0m04.31s system
We're using the PSS samples we collect asynchronously for
system-management tasks like fine-tuning oom_adj_score, memory use
tracking for debugging, application-level memory-use attribution, and
deciding whether we want to kill large processes during system idle
maintenance windows. Android has been using PSS for these purposes for
a long time; as the average process VMA count has increased and and
devices become more efficiency-conscious, PSS-collection inefficiency
has started to matter more. IMHO, it'd be a lot safer to optimize the
existing PSS-collection model, which has been fine-tuned over the years,
instead of changing the memory tracking approach entirely to work around
smaps-generation inefficiency.
Tim said:
: There are two main reasons why Android gathers PSS information:
:
: 1. Android devices can show the user the amount of memory used per
: application via the settings app. This is a less important use case.
:
: 2. We log PSS to help identify leaks in applications. We have found
: an enormous number of bugs (in the Android platform, in Google's own
: apps, and in third-party applications) using this data.
:
: To do this, system_server (the main process in Android userspace) will
: sample the PSS of a process three seconds after it changes state (for
: example, app is launched and becomes the foreground application) and about
: every ten minutes after that. The net result is that PSS collection is
: regularly running on at least one process in the system (usually a few
: times a minute while the screen is on, less when screen is off due to
: suspend). PSS of a process is an incredibly useful stat to track, and we
: aren't going to get rid of it. We've looked at some very hacky approaches
: using RSS ("take the RSS of the target process, subtract the RSS of the
: zygote process that is the parent of all Android apps") to reduce the
: accounting time, but it regularly overestimated the memory used by 20+
: percent. Accordingly, I don't think that there's a good alternative to
: using PSS.
:
: We started looking into PSS collection performance after we noticed random
: frequency spikes while a phone's screen was off; occasionally, one of the
: CPU clusters would ramp to a high frequency because there was 200-300ms of
: constant CPU work from a single thread in the main Android userspace
: process. The work causing the spike (which is reasonable governor
: behavior given the amount of CPU time needed) was always PSS collection.
: As a result, Android is burning more power than we should be on PSS
: collection.
:
: The other issue (and why I'm less sure about improving smaps as a
: long-term solution) is that the number of VMAs per process has increased
: significantly from release to release. After trying to figure out why we
: were seeing these 200-300ms PSS collection times on Android O but had not
: noticed it in previous versions, we found that the number of VMAs in the
: main system process increased by 50% from Android N to Android O (from
: ~1800 to ~2700) and varying increases in every userspace process. Android
: M to N also had an increase in the number of VMAs, although not as much.
: I'm not sure why this is increasing so much over time, but thinking about
: ASLR and ways to make ASLR better, I expect that this will continue to
: increase going forward. I would not be surprised if we hit 5000 VMAs on
: the main Android process (system_server) by 2020.
:
: If we assume that the number of VMAs is going to increase over time, then
: doing anything we can do to reduce the overhead of each VMA during PSS
: collection seems like the right way to go, and that means outputting an
: aggregate statistic (to avoid whatever overhead there is per line in
: writing smaps and in reading each line from userspace).
Link: http://lkml.kernel.org/r/20170812022148.178293-1-dancol@google.com
Signed-off-by: Daniel Colascione <dancol@google.com>
Cc: Tim Murray <timmurray@google.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:25:08 +00:00
|
|
|
}
|
|
|
|
|
procfs: mark thread stack correctly in proc/<pid>/maps
Stack for a new thread is mapped by userspace code and passed via
sys_clone. This memory is currently seen as anonymous in
/proc/<pid>/maps, which makes it difficult to ascertain which mappings
are being used for thread stacks. This patch uses the individual task
stack pointers to determine which vmas are actually thread stacks.
For a multithreaded program like the following:
#include <pthread.h>
void *thread_main(void *foo)
{
while(1);
}
int main()
{
pthread_t t;
pthread_create(&t, NULL, thread_main, NULL);
pthread_join(t, NULL);
}
proc/PID/maps looks like the following:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
Here, one could guess that 7f8a44492000-7f8a44c92000 is a stack since
the earlier vma that has no permissions (7f8a44e3d000-7f8a4503d000) but
that is not always a reliable way to find out which vma is a thread
stack. Also, /proc/PID/maps and /proc/PID/task/TID/maps has the same
content.
With this patch in place, /proc/PID/task/TID/maps are treated as 'maps
as the task would see it' and hence, only the vma that that task uses as
stack is marked as [stack]. All other 'stack' vmas are marked as
anonymous memory. /proc/PID/maps acts as a thread group level view,
where all thread stack vmas are marked as [stack:TID] where TID is the
process ID of the task that uses that vma as stack, while the process
stack is marked as [stack].
So /proc/PID/maps will look like this:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack:1442]
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
Thus marking all vmas that are used as stacks by the threads in the
thread group along with the process stack. The task level maps will
however like this:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack]
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
where only the vma that is being used as a stack by *that* task is
marked as [stack].
Analogous changes have been made to /proc/PID/smaps,
/proc/PID/numa_maps, /proc/PID/task/TID/smaps and
/proc/PID/task/TID/numa_maps. Relevant snippets from smaps and
numa_maps:
[siddhesh@localhost ~ ]$ pgrep a.out
1441
[siddhesh@localhost ~ ]$ cat /proc/1441/smaps | grep "\[stack"
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack:1442]
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1442/smaps | grep "\[stack"
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1441/smaps | grep "\[stack"
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/numa_maps | grep "stack"
7f8a44492000 default stack:1442 anon=2 dirty=2 N0=2
7fff6273a000 default stack anon=3 dirty=3 N0=3
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1442/numa_maps | grep "stack"
7f8a44492000 default stack anon=2 dirty=2 N0=2
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1441/numa_maps | grep "stack"
7fff6273a000 default stack anon=3 dirty=3 N0=3
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix build]
Signed-off-by: Siddhesh Poyarekar <siddhesh.poyarekar@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jamie Lokier <jamie@shareable.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:04 +00:00
|
|
|
const struct file_operations proc_pid_smaps_operations = {
|
|
|
|
.open = pid_smaps_open,
|
|
|
|
.read = seq_read,
|
|
|
|
.llseek = seq_lseek,
|
2014-10-09 22:25:26 +00:00
|
|
|
.release = proc_map_release,
|
procfs: mark thread stack correctly in proc/<pid>/maps
Stack for a new thread is mapped by userspace code and passed via
sys_clone. This memory is currently seen as anonymous in
/proc/<pid>/maps, which makes it difficult to ascertain which mappings
are being used for thread stacks. This patch uses the individual task
stack pointers to determine which vmas are actually thread stacks.
For a multithreaded program like the following:
#include <pthread.h>
void *thread_main(void *foo)
{
while(1);
}
int main()
{
pthread_t t;
pthread_create(&t, NULL, thread_main, NULL);
pthread_join(t, NULL);
}
proc/PID/maps looks like the following:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
Here, one could guess that 7f8a44492000-7f8a44c92000 is a stack since
the earlier vma that has no permissions (7f8a44e3d000-7f8a4503d000) but
that is not always a reliable way to find out which vma is a thread
stack. Also, /proc/PID/maps and /proc/PID/task/TID/maps has the same
content.
With this patch in place, /proc/PID/task/TID/maps are treated as 'maps
as the task would see it' and hence, only the vma that that task uses as
stack is marked as [stack]. All other 'stack' vmas are marked as
anonymous memory. /proc/PID/maps acts as a thread group level view,
where all thread stack vmas are marked as [stack:TID] where TID is the
process ID of the task that uses that vma as stack, while the process
stack is marked as [stack].
So /proc/PID/maps will look like this:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack:1442]
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
Thus marking all vmas that are used as stacks by the threads in the
thread group along with the process stack. The task level maps will
however like this:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack]
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
where only the vma that is being used as a stack by *that* task is
marked as [stack].
Analogous changes have been made to /proc/PID/smaps,
/proc/PID/numa_maps, /proc/PID/task/TID/smaps and
/proc/PID/task/TID/numa_maps. Relevant snippets from smaps and
numa_maps:
[siddhesh@localhost ~ ]$ pgrep a.out
1441
[siddhesh@localhost ~ ]$ cat /proc/1441/smaps | grep "\[stack"
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack:1442]
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1442/smaps | grep "\[stack"
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1441/smaps | grep "\[stack"
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/numa_maps | grep "stack"
7f8a44492000 default stack:1442 anon=2 dirty=2 N0=2
7fff6273a000 default stack anon=3 dirty=3 N0=3
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1442/numa_maps | grep "stack"
7f8a44492000 default stack anon=2 dirty=2 N0=2
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1441/numa_maps | grep "stack"
7fff6273a000 default stack anon=3 dirty=3 N0=3
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix build]
Signed-off-by: Siddhesh Poyarekar <siddhesh.poyarekar@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jamie Lokier <jamie@shareable.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:04 +00:00
|
|
|
};
|
|
|
|
|
mm: add /proc/pid/smaps_rollup
/proc/pid/smaps_rollup is a new proc file that improves the performance
of user programs that determine aggregate memory statistics (e.g., total
PSS) of a process.
Android regularly "samples" the memory usage of various processes in
order to balance its memory pool sizes. This sampling process involves
opening /proc/pid/smaps and summing certain fields. For very large
processes, sampling memory use this way can take several hundred
milliseconds, due mostly to the overhead of the seq_printf calls in
task_mmu.c.
smaps_rollup improves the situation. It contains most of the fields of
/proc/pid/smaps, but instead of a set of fields for each VMA,
smaps_rollup instead contains one synthetic smaps-format entry
representing the whole process. In the single smaps_rollup synthetic
entry, each field is the summation of the corresponding field in all of
the real-smaps VMAs. Using a common format for smaps_rollup and smaps
allows userspace parsers to repurpose parsers meant for use with
non-rollup smaps for smaps_rollup, and it allows userspace to switch
between smaps_rollup and smaps at runtime (say, based on the
availability of smaps_rollup in a given kernel) with minimal fuss.
By using smaps_rollup instead of smaps, a caller can avoid the
significant overhead of formatting, reading, and parsing each of a large
process's potentially very numerous memory mappings. For sampling
system_server's PSS in Android, we measured a 12x speedup, representing
a savings of several hundred milliseconds.
One alternative to a new per-process proc file would have been including
PSS information in /proc/pid/status. We considered this option but
thought that PSS would be too expensive (by a few orders of magnitude)
to collect relative to what's already emitted as part of
/proc/pid/status, and slowing every user of /proc/pid/status for the
sake of readers that happen to want PSS feels wrong.
The code itself works by reusing the existing VMA-walking framework we
use for regular smaps generation and keeping the mem_size_stats
structure around between VMA walks instead of using a fresh one for each
VMA. In this way, summation happens automatically. We let seq_file
walk over the VMAs just as it does for regular smaps and just emit
nothing to the seq_file until we hit the last VMA.
Benchmarks:
using smaps:
iterations:1000 pid:1163 pss:220023808
0m29.46s real 0m08.28s user 0m20.98s system
using smaps_rollup:
iterations:1000 pid:1163 pss:220702720
0m04.39s real 0m00.03s user 0m04.31s system
We're using the PSS samples we collect asynchronously for
system-management tasks like fine-tuning oom_adj_score, memory use
tracking for debugging, application-level memory-use attribution, and
deciding whether we want to kill large processes during system idle
maintenance windows. Android has been using PSS for these purposes for
a long time; as the average process VMA count has increased and and
devices become more efficiency-conscious, PSS-collection inefficiency
has started to matter more. IMHO, it'd be a lot safer to optimize the
existing PSS-collection model, which has been fine-tuned over the years,
instead of changing the memory tracking approach entirely to work around
smaps-generation inefficiency.
Tim said:
: There are two main reasons why Android gathers PSS information:
:
: 1. Android devices can show the user the amount of memory used per
: application via the settings app. This is a less important use case.
:
: 2. We log PSS to help identify leaks in applications. We have found
: an enormous number of bugs (in the Android platform, in Google's own
: apps, and in third-party applications) using this data.
:
: To do this, system_server (the main process in Android userspace) will
: sample the PSS of a process three seconds after it changes state (for
: example, app is launched and becomes the foreground application) and about
: every ten minutes after that. The net result is that PSS collection is
: regularly running on at least one process in the system (usually a few
: times a minute while the screen is on, less when screen is off due to
: suspend). PSS of a process is an incredibly useful stat to track, and we
: aren't going to get rid of it. We've looked at some very hacky approaches
: using RSS ("take the RSS of the target process, subtract the RSS of the
: zygote process that is the parent of all Android apps") to reduce the
: accounting time, but it regularly overestimated the memory used by 20+
: percent. Accordingly, I don't think that there's a good alternative to
: using PSS.
:
: We started looking into PSS collection performance after we noticed random
: frequency spikes while a phone's screen was off; occasionally, one of the
: CPU clusters would ramp to a high frequency because there was 200-300ms of
: constant CPU work from a single thread in the main Android userspace
: process. The work causing the spike (which is reasonable governor
: behavior given the amount of CPU time needed) was always PSS collection.
: As a result, Android is burning more power than we should be on PSS
: collection.
:
: The other issue (and why I'm less sure about improving smaps as a
: long-term solution) is that the number of VMAs per process has increased
: significantly from release to release. After trying to figure out why we
: were seeing these 200-300ms PSS collection times on Android O but had not
: noticed it in previous versions, we found that the number of VMAs in the
: main system process increased by 50% from Android N to Android O (from
: ~1800 to ~2700) and varying increases in every userspace process. Android
: M to N also had an increase in the number of VMAs, although not as much.
: I'm not sure why this is increasing so much over time, but thinking about
: ASLR and ways to make ASLR better, I expect that this will continue to
: increase going forward. I would not be surprised if we hit 5000 VMAs on
: the main Android process (system_server) by 2020.
:
: If we assume that the number of VMAs is going to increase over time, then
: doing anything we can do to reduce the overhead of each VMA during PSS
: collection seems like the right way to go, and that means outputting an
: aggregate statistic (to avoid whatever overhead there is per line in
: writing smaps and in reading each line from userspace).
Link: http://lkml.kernel.org/r/20170812022148.178293-1-dancol@google.com
Signed-off-by: Daniel Colascione <dancol@google.com>
Cc: Tim Murray <timmurray@google.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:25:08 +00:00
|
|
|
const struct file_operations proc_pid_smaps_rollup_operations = {
|
mm: /proc/pid/smaps_rollup: convert to single value seq_file
The /proc/pid/smaps_rollup file is currently implemented via the
m_start/m_next/m_stop seq_file iterators shared with the other maps files,
that iterate over vma's. However, the rollup file doesn't print anything
for each vma, only accumulate the stats.
There are some issues with the current code as reported in [1] - the
accumulated stats can get skewed if seq_file start()/stop() op is called
multiple times, if show() is called multiple times, and after seeks to
non-zero position.
Patch [1] fixed those within existing design, but I believe it is
fundamentally wrong to expose the vma iterators to the seq_file mechanism
when smaps_rollup shows logically a single set of values for the whole
address space.
This patch thus refactors the code to provide a single "value" at offset
0, with vma iteration to gather the stats done internally. This fixes the
situations where results are skewed, and simplifies the code, especially
in show_smap(), at the expense of somewhat less code reuse.
[1] https://marc.info/?l=linux-mm&m=151927723128134&w=2
[vbabka@suse.c: use seq_file infrastructure]
Link: http://lkml.kernel.org/r/bf4525b0-fd5b-4c4c-2cb3-adee3dd95a48@suse.cz
Link: http://lkml.kernel.org/r/20180723111933.15443-5-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Daniel Colascione <dancol@google.com>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 04:52:59 +00:00
|
|
|
.open = smaps_rollup_open,
|
mm: add /proc/pid/smaps_rollup
/proc/pid/smaps_rollup is a new proc file that improves the performance
of user programs that determine aggregate memory statistics (e.g., total
PSS) of a process.
Android regularly "samples" the memory usage of various processes in
order to balance its memory pool sizes. This sampling process involves
opening /proc/pid/smaps and summing certain fields. For very large
processes, sampling memory use this way can take several hundred
milliseconds, due mostly to the overhead of the seq_printf calls in
task_mmu.c.
smaps_rollup improves the situation. It contains most of the fields of
/proc/pid/smaps, but instead of a set of fields for each VMA,
smaps_rollup instead contains one synthetic smaps-format entry
representing the whole process. In the single smaps_rollup synthetic
entry, each field is the summation of the corresponding field in all of
the real-smaps VMAs. Using a common format for smaps_rollup and smaps
allows userspace parsers to repurpose parsers meant for use with
non-rollup smaps for smaps_rollup, and it allows userspace to switch
between smaps_rollup and smaps at runtime (say, based on the
availability of smaps_rollup in a given kernel) with minimal fuss.
By using smaps_rollup instead of smaps, a caller can avoid the
significant overhead of formatting, reading, and parsing each of a large
process's potentially very numerous memory mappings. For sampling
system_server's PSS in Android, we measured a 12x speedup, representing
a savings of several hundred milliseconds.
One alternative to a new per-process proc file would have been including
PSS information in /proc/pid/status. We considered this option but
thought that PSS would be too expensive (by a few orders of magnitude)
to collect relative to what's already emitted as part of
/proc/pid/status, and slowing every user of /proc/pid/status for the
sake of readers that happen to want PSS feels wrong.
The code itself works by reusing the existing VMA-walking framework we
use for regular smaps generation and keeping the mem_size_stats
structure around between VMA walks instead of using a fresh one for each
VMA. In this way, summation happens automatically. We let seq_file
walk over the VMAs just as it does for regular smaps and just emit
nothing to the seq_file until we hit the last VMA.
Benchmarks:
using smaps:
iterations:1000 pid:1163 pss:220023808
0m29.46s real 0m08.28s user 0m20.98s system
using smaps_rollup:
iterations:1000 pid:1163 pss:220702720
0m04.39s real 0m00.03s user 0m04.31s system
We're using the PSS samples we collect asynchronously for
system-management tasks like fine-tuning oom_adj_score, memory use
tracking for debugging, application-level memory-use attribution, and
deciding whether we want to kill large processes during system idle
maintenance windows. Android has been using PSS for these purposes for
a long time; as the average process VMA count has increased and and
devices become more efficiency-conscious, PSS-collection inefficiency
has started to matter more. IMHO, it'd be a lot safer to optimize the
existing PSS-collection model, which has been fine-tuned over the years,
instead of changing the memory tracking approach entirely to work around
smaps-generation inefficiency.
Tim said:
: There are two main reasons why Android gathers PSS information:
:
: 1. Android devices can show the user the amount of memory used per
: application via the settings app. This is a less important use case.
:
: 2. We log PSS to help identify leaks in applications. We have found
: an enormous number of bugs (in the Android platform, in Google's own
: apps, and in third-party applications) using this data.
:
: To do this, system_server (the main process in Android userspace) will
: sample the PSS of a process three seconds after it changes state (for
: example, app is launched and becomes the foreground application) and about
: every ten minutes after that. The net result is that PSS collection is
: regularly running on at least one process in the system (usually a few
: times a minute while the screen is on, less when screen is off due to
: suspend). PSS of a process is an incredibly useful stat to track, and we
: aren't going to get rid of it. We've looked at some very hacky approaches
: using RSS ("take the RSS of the target process, subtract the RSS of the
: zygote process that is the parent of all Android apps") to reduce the
: accounting time, but it regularly overestimated the memory used by 20+
: percent. Accordingly, I don't think that there's a good alternative to
: using PSS.
:
: We started looking into PSS collection performance after we noticed random
: frequency spikes while a phone's screen was off; occasionally, one of the
: CPU clusters would ramp to a high frequency because there was 200-300ms of
: constant CPU work from a single thread in the main Android userspace
: process. The work causing the spike (which is reasonable governor
: behavior given the amount of CPU time needed) was always PSS collection.
: As a result, Android is burning more power than we should be on PSS
: collection.
:
: The other issue (and why I'm less sure about improving smaps as a
: long-term solution) is that the number of VMAs per process has increased
: significantly from release to release. After trying to figure out why we
: were seeing these 200-300ms PSS collection times on Android O but had not
: noticed it in previous versions, we found that the number of VMAs in the
: main system process increased by 50% from Android N to Android O (from
: ~1800 to ~2700) and varying increases in every userspace process. Android
: M to N also had an increase in the number of VMAs, although not as much.
: I'm not sure why this is increasing so much over time, but thinking about
: ASLR and ways to make ASLR better, I expect that this will continue to
: increase going forward. I would not be surprised if we hit 5000 VMAs on
: the main Android process (system_server) by 2020.
:
: If we assume that the number of VMAs is going to increase over time, then
: doing anything we can do to reduce the overhead of each VMA during PSS
: collection seems like the right way to go, and that means outputting an
: aggregate statistic (to avoid whatever overhead there is per line in
: writing smaps and in reading each line from userspace).
Link: http://lkml.kernel.org/r/20170812022148.178293-1-dancol@google.com
Signed-off-by: Daniel Colascione <dancol@google.com>
Cc: Tim Murray <timmurray@google.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:25:08 +00:00
|
|
|
.read = seq_read,
|
|
|
|
.llseek = seq_lseek,
|
mm: /proc/pid/smaps_rollup: convert to single value seq_file
The /proc/pid/smaps_rollup file is currently implemented via the
m_start/m_next/m_stop seq_file iterators shared with the other maps files,
that iterate over vma's. However, the rollup file doesn't print anything
for each vma, only accumulate the stats.
There are some issues with the current code as reported in [1] - the
accumulated stats can get skewed if seq_file start()/stop() op is called
multiple times, if show() is called multiple times, and after seeks to
non-zero position.
Patch [1] fixed those within existing design, but I believe it is
fundamentally wrong to expose the vma iterators to the seq_file mechanism
when smaps_rollup shows logically a single set of values for the whole
address space.
This patch thus refactors the code to provide a single "value" at offset
0, with vma iteration to gather the stats done internally. This fixes the
situations where results are skewed, and simplifies the code, especially
in show_smap(), at the expense of somewhat less code reuse.
[1] https://marc.info/?l=linux-mm&m=151927723128134&w=2
[vbabka@suse.c: use seq_file infrastructure]
Link: http://lkml.kernel.org/r/bf4525b0-fd5b-4c4c-2cb3-adee3dd95a48@suse.cz
Link: http://lkml.kernel.org/r/20180723111933.15443-5-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Daniel Colascione <dancol@google.com>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 04:52:59 +00:00
|
|
|
.release = smaps_rollup_release,
|
mm: add /proc/pid/smaps_rollup
/proc/pid/smaps_rollup is a new proc file that improves the performance
of user programs that determine aggregate memory statistics (e.g., total
PSS) of a process.
Android regularly "samples" the memory usage of various processes in
order to balance its memory pool sizes. This sampling process involves
opening /proc/pid/smaps and summing certain fields. For very large
processes, sampling memory use this way can take several hundred
milliseconds, due mostly to the overhead of the seq_printf calls in
task_mmu.c.
smaps_rollup improves the situation. It contains most of the fields of
/proc/pid/smaps, but instead of a set of fields for each VMA,
smaps_rollup instead contains one synthetic smaps-format entry
representing the whole process. In the single smaps_rollup synthetic
entry, each field is the summation of the corresponding field in all of
the real-smaps VMAs. Using a common format for smaps_rollup and smaps
allows userspace parsers to repurpose parsers meant for use with
non-rollup smaps for smaps_rollup, and it allows userspace to switch
between smaps_rollup and smaps at runtime (say, based on the
availability of smaps_rollup in a given kernel) with minimal fuss.
By using smaps_rollup instead of smaps, a caller can avoid the
significant overhead of formatting, reading, and parsing each of a large
process's potentially very numerous memory mappings. For sampling
system_server's PSS in Android, we measured a 12x speedup, representing
a savings of several hundred milliseconds.
One alternative to a new per-process proc file would have been including
PSS information in /proc/pid/status. We considered this option but
thought that PSS would be too expensive (by a few orders of magnitude)
to collect relative to what's already emitted as part of
/proc/pid/status, and slowing every user of /proc/pid/status for the
sake of readers that happen to want PSS feels wrong.
The code itself works by reusing the existing VMA-walking framework we
use for regular smaps generation and keeping the mem_size_stats
structure around between VMA walks instead of using a fresh one for each
VMA. In this way, summation happens automatically. We let seq_file
walk over the VMAs just as it does for regular smaps and just emit
nothing to the seq_file until we hit the last VMA.
Benchmarks:
using smaps:
iterations:1000 pid:1163 pss:220023808
0m29.46s real 0m08.28s user 0m20.98s system
using smaps_rollup:
iterations:1000 pid:1163 pss:220702720
0m04.39s real 0m00.03s user 0m04.31s system
We're using the PSS samples we collect asynchronously for
system-management tasks like fine-tuning oom_adj_score, memory use
tracking for debugging, application-level memory-use attribution, and
deciding whether we want to kill large processes during system idle
maintenance windows. Android has been using PSS for these purposes for
a long time; as the average process VMA count has increased and and
devices become more efficiency-conscious, PSS-collection inefficiency
has started to matter more. IMHO, it'd be a lot safer to optimize the
existing PSS-collection model, which has been fine-tuned over the years,
instead of changing the memory tracking approach entirely to work around
smaps-generation inefficiency.
Tim said:
: There are two main reasons why Android gathers PSS information:
:
: 1. Android devices can show the user the amount of memory used per
: application via the settings app. This is a less important use case.
:
: 2. We log PSS to help identify leaks in applications. We have found
: an enormous number of bugs (in the Android platform, in Google's own
: apps, and in third-party applications) using this data.
:
: To do this, system_server (the main process in Android userspace) will
: sample the PSS of a process three seconds after it changes state (for
: example, app is launched and becomes the foreground application) and about
: every ten minutes after that. The net result is that PSS collection is
: regularly running on at least one process in the system (usually a few
: times a minute while the screen is on, less when screen is off due to
: suspend). PSS of a process is an incredibly useful stat to track, and we
: aren't going to get rid of it. We've looked at some very hacky approaches
: using RSS ("take the RSS of the target process, subtract the RSS of the
: zygote process that is the parent of all Android apps") to reduce the
: accounting time, but it regularly overestimated the memory used by 20+
: percent. Accordingly, I don't think that there's a good alternative to
: using PSS.
:
: We started looking into PSS collection performance after we noticed random
: frequency spikes while a phone's screen was off; occasionally, one of the
: CPU clusters would ramp to a high frequency because there was 200-300ms of
: constant CPU work from a single thread in the main Android userspace
: process. The work causing the spike (which is reasonable governor
: behavior given the amount of CPU time needed) was always PSS collection.
: As a result, Android is burning more power than we should be on PSS
: collection.
:
: The other issue (and why I'm less sure about improving smaps as a
: long-term solution) is that the number of VMAs per process has increased
: significantly from release to release. After trying to figure out why we
: were seeing these 200-300ms PSS collection times on Android O but had not
: noticed it in previous versions, we found that the number of VMAs in the
: main system process increased by 50% from Android N to Android O (from
: ~1800 to ~2700) and varying increases in every userspace process. Android
: M to N also had an increase in the number of VMAs, although not as much.
: I'm not sure why this is increasing so much over time, but thinking about
: ASLR and ways to make ASLR better, I expect that this will continue to
: increase going forward. I would not be surprised if we hit 5000 VMAs on
: the main Android process (system_server) by 2020.
:
: If we assume that the number of VMAs is going to increase over time, then
: doing anything we can do to reduce the overhead of each VMA during PSS
: collection seems like the right way to go, and that means outputting an
: aggregate statistic (to avoid whatever overhead there is per line in
: writing smaps and in reading each line from userspace).
Link: http://lkml.kernel.org/r/20170812022148.178293-1-dancol@google.com
Signed-off-by: Daniel Colascione <dancol@google.com>
Cc: Tim Murray <timmurray@google.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:25:08 +00:00
|
|
|
};
|
|
|
|
|
clear_refs: sanitize accepted commands declaration
This is the implementation of the soft-dirty bit concept that should
help keep track of changes in user memory, which in turn is very-very
required by the checkpoint-restore project (http://criu.org).
To create a dump of an application(s) we save all the information about
it to files, and the biggest part of such dump is the contents of tasks'
memory. However, there are usage scenarios where it's not required to
get _all_ the task memory while creating a dump. For example, when
doing periodical dumps, it's only required to take full memory dump only
at the first step and then take incremental changes of memory. Another
example is live migration. We copy all the memory to the destination
node without stopping all tasks, then stop them, check for what pages
has changed, dump it and the rest of the state, then copy it to the
destination node. This decreases freeze time significantly.
That said, some help from kernel to watch how processes modify the
contents of their memory is required.
The proposal is to track changes with the help of new soft-dirty bit
this way:
1. First do "echo 4 > /proc/$pid/clear_refs".
At that point kernel clears the soft dirty _and_ the writable bits from all
ptes of process $pid. From now on every write to any page will result in #pf
and the subsequent call to pte_mkdirty/pmd_mkdirty, which in turn will set
the soft dirty flag.
2. Then read the /proc/$pid/pagemap2 and check the soft-dirty bit reported there
(the 55'th one). If set, the respective pte was written to since last call
to clear refs.
The soft-dirty bit is the _PAGE_BIT_HIDDEN one. Although it's used by
kmemcheck, the latter one marks kernel pages with it, while the former
bit is put on user pages so they do not conflict to each other.
This patch:
A new clear-refs type will be added in the next patch, so prepare
code for that.
[akpm@linux-foundation.org: don't assume that sizeof(enum clear_refs_types) == sizeof(int)]
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 22:01:16 +00:00
|
|
|
enum clear_refs_types {
|
|
|
|
CLEAR_REFS_ALL = 1,
|
|
|
|
CLEAR_REFS_ANON,
|
|
|
|
CLEAR_REFS_MAPPED,
|
mm: soft-dirty bits for user memory changes tracking
The soft-dirty is a bit on a PTE which helps to track which pages a task
writes to. In order to do this tracking one should
1. Clear soft-dirty bits from PTEs ("echo 4 > /proc/PID/clear_refs)
2. Wait some time.
3. Read soft-dirty bits (55'th in /proc/PID/pagemap2 entries)
To do this tracking, the writable bit is cleared from PTEs when the
soft-dirty bit is. Thus, after this, when the task tries to modify a
page at some virtual address the #PF occurs and the kernel sets the
soft-dirty bit on the respective PTE.
Note, that although all the task's address space is marked as r/o after
the soft-dirty bits clear, the #PF-s that occur after that are processed
fast. This is so, since the pages are still mapped to physical memory,
and thus all the kernel does is finds this fact out and puts back
writable, dirty and soft-dirty bits on the PTE.
Another thing to note, is that when mremap moves PTEs they are marked
with soft-dirty as well, since from the user perspective mremap modifies
the virtual memory at mremap's new address.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 22:01:20 +00:00
|
|
|
CLEAR_REFS_SOFT_DIRTY,
|
2015-02-12 23:01:00 +00:00
|
|
|
CLEAR_REFS_MM_HIWATER_RSS,
|
clear_refs: sanitize accepted commands declaration
This is the implementation of the soft-dirty bit concept that should
help keep track of changes in user memory, which in turn is very-very
required by the checkpoint-restore project (http://criu.org).
To create a dump of an application(s) we save all the information about
it to files, and the biggest part of such dump is the contents of tasks'
memory. However, there are usage scenarios where it's not required to
get _all_ the task memory while creating a dump. For example, when
doing periodical dumps, it's only required to take full memory dump only
at the first step and then take incremental changes of memory. Another
example is live migration. We copy all the memory to the destination
node without stopping all tasks, then stop them, check for what pages
has changed, dump it and the rest of the state, then copy it to the
destination node. This decreases freeze time significantly.
That said, some help from kernel to watch how processes modify the
contents of their memory is required.
The proposal is to track changes with the help of new soft-dirty bit
this way:
1. First do "echo 4 > /proc/$pid/clear_refs".
At that point kernel clears the soft dirty _and_ the writable bits from all
ptes of process $pid. From now on every write to any page will result in #pf
and the subsequent call to pte_mkdirty/pmd_mkdirty, which in turn will set
the soft dirty flag.
2. Then read the /proc/$pid/pagemap2 and check the soft-dirty bit reported there
(the 55'th one). If set, the respective pte was written to since last call
to clear refs.
The soft-dirty bit is the _PAGE_BIT_HIDDEN one. Although it's used by
kmemcheck, the latter one marks kernel pages with it, while the former
bit is put on user pages so they do not conflict to each other.
This patch:
A new clear-refs type will be added in the next patch, so prepare
code for that.
[akpm@linux-foundation.org: don't assume that sizeof(enum clear_refs_types) == sizeof(int)]
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 22:01:16 +00:00
|
|
|
CLEAR_REFS_LAST,
|
|
|
|
};
|
|
|
|
|
2013-07-03 22:01:18 +00:00
|
|
|
struct clear_refs_private {
|
mm: soft-dirty bits for user memory changes tracking
The soft-dirty is a bit on a PTE which helps to track which pages a task
writes to. In order to do this tracking one should
1. Clear soft-dirty bits from PTEs ("echo 4 > /proc/PID/clear_refs)
2. Wait some time.
3. Read soft-dirty bits (55'th in /proc/PID/pagemap2 entries)
To do this tracking, the writable bit is cleared from PTEs when the
soft-dirty bit is. Thus, after this, when the task tries to modify a
page at some virtual address the #PF occurs and the kernel sets the
soft-dirty bit on the respective PTE.
Note, that although all the task's address space is marked as r/o after
the soft-dirty bits clear, the #PF-s that occur after that are processed
fast. This is so, since the pages are still mapped to physical memory,
and thus all the kernel does is finds this fact out and puts back
writable, dirty and soft-dirty bits on the PTE.
Another thing to note, is that when mremap moves PTEs they are marked
with soft-dirty as well, since from the user perspective mremap modifies
the virtual memory at mremap's new address.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 22:01:20 +00:00
|
|
|
enum clear_refs_types type;
|
2013-07-03 22:01:18 +00:00
|
|
|
};
|
|
|
|
|
2015-02-11 23:28:08 +00:00
|
|
|
#ifdef CONFIG_MEM_SOFT_DIRTY
|
2021-01-10 01:09:10 +00:00
|
|
|
|
|
|
|
static inline bool pte_is_pinned(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
|
|
|
|
{
|
|
|
|
struct page *page;
|
|
|
|
|
|
|
|
if (!pte_write(pte))
|
|
|
|
return false;
|
|
|
|
if (!is_cow_mapping(vma->vm_flags))
|
|
|
|
return false;
|
|
|
|
if (likely(!atomic_read(&vma->vm_mm->has_pinned)))
|
|
|
|
return false;
|
|
|
|
page = vm_normal_page(vma, addr, pte);
|
|
|
|
if (!page)
|
|
|
|
return false;
|
|
|
|
return page_maybe_dma_pinned(page);
|
|
|
|
}
|
|
|
|
|
mm: soft-dirty bits for user memory changes tracking
The soft-dirty is a bit on a PTE which helps to track which pages a task
writes to. In order to do this tracking one should
1. Clear soft-dirty bits from PTEs ("echo 4 > /proc/PID/clear_refs)
2. Wait some time.
3. Read soft-dirty bits (55'th in /proc/PID/pagemap2 entries)
To do this tracking, the writable bit is cleared from PTEs when the
soft-dirty bit is. Thus, after this, when the task tries to modify a
page at some virtual address the #PF occurs and the kernel sets the
soft-dirty bit on the respective PTE.
Note, that although all the task's address space is marked as r/o after
the soft-dirty bits clear, the #PF-s that occur after that are processed
fast. This is so, since the pages are still mapped to physical memory,
and thus all the kernel does is finds this fact out and puts back
writable, dirty and soft-dirty bits on the PTE.
Another thing to note, is that when mremap moves PTEs they are marked
with soft-dirty as well, since from the user perspective mremap modifies
the virtual memory at mremap's new address.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 22:01:20 +00:00
|
|
|
static inline void clear_soft_dirty(struct vm_area_struct *vma,
|
|
|
|
unsigned long addr, pte_t *pte)
|
|
|
|
{
|
|
|
|
/*
|
|
|
|
* The soft-dirty tracker uses #PF-s to catch writes
|
|
|
|
* to pages, so write-protect the pte as well. See the
|
2018-04-18 08:07:49 +00:00
|
|
|
* Documentation/admin-guide/mm/soft-dirty.rst for full description
|
mm: soft-dirty bits for user memory changes tracking
The soft-dirty is a bit on a PTE which helps to track which pages a task
writes to. In order to do this tracking one should
1. Clear soft-dirty bits from PTEs ("echo 4 > /proc/PID/clear_refs)
2. Wait some time.
3. Read soft-dirty bits (55'th in /proc/PID/pagemap2 entries)
To do this tracking, the writable bit is cleared from PTEs when the
soft-dirty bit is. Thus, after this, when the task tries to modify a
page at some virtual address the #PF occurs and the kernel sets the
soft-dirty bit on the respective PTE.
Note, that although all the task's address space is marked as r/o after
the soft-dirty bits clear, the #PF-s that occur after that are processed
fast. This is so, since the pages are still mapped to physical memory,
and thus all the kernel does is finds this fact out and puts back
writable, dirty and soft-dirty bits on the PTE.
Another thing to note, is that when mremap moves PTEs they are marked
with soft-dirty as well, since from the user perspective mremap modifies
the virtual memory at mremap's new address.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 22:01:20 +00:00
|
|
|
* of how soft-dirty works.
|
|
|
|
*/
|
|
|
|
pte_t ptent = *pte;
|
2013-08-13 23:00:49 +00:00
|
|
|
|
|
|
|
if (pte_present(ptent)) {
|
2019-03-05 23:46:29 +00:00
|
|
|
pte_t old_pte;
|
|
|
|
|
2021-01-10 01:09:10 +00:00
|
|
|
if (pte_is_pinned(vma, addr, ptent))
|
|
|
|
return;
|
2019-03-05 23:46:29 +00:00
|
|
|
old_pte = ptep_modify_prot_start(vma, addr, pte);
|
|
|
|
ptent = pte_wrprotect(old_pte);
|
2015-04-22 12:20:47 +00:00
|
|
|
ptent = pte_clear_soft_dirty(ptent);
|
2019-03-05 23:46:29 +00:00
|
|
|
ptep_modify_prot_commit(vma, addr, pte, old_pte, ptent);
|
2013-08-13 23:00:49 +00:00
|
|
|
} else if (is_swap_pte(ptent)) {
|
|
|
|
ptent = pte_swp_clear_soft_dirty(ptent);
|
2015-11-06 02:49:21 +00:00
|
|
|
set_pte_at(vma->vm_mm, addr, pte, ptent);
|
2013-08-13 23:00:49 +00:00
|
|
|
}
|
mm: soft-dirty bits for user memory changes tracking
The soft-dirty is a bit on a PTE which helps to track which pages a task
writes to. In order to do this tracking one should
1. Clear soft-dirty bits from PTEs ("echo 4 > /proc/PID/clear_refs)
2. Wait some time.
3. Read soft-dirty bits (55'th in /proc/PID/pagemap2 entries)
To do this tracking, the writable bit is cleared from PTEs when the
soft-dirty bit is. Thus, after this, when the task tries to modify a
page at some virtual address the #PF occurs and the kernel sets the
soft-dirty bit on the respective PTE.
Note, that although all the task's address space is marked as r/o after
the soft-dirty bits clear, the #PF-s that occur after that are processed
fast. This is so, since the pages are still mapped to physical memory,
and thus all the kernel does is finds this fact out and puts back
writable, dirty and soft-dirty bits on the PTE.
Another thing to note, is that when mremap moves PTEs they are marked
with soft-dirty as well, since from the user perspective mremap modifies
the virtual memory at mremap's new address.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 22:01:20 +00:00
|
|
|
}
|
2015-11-06 02:49:24 +00:00
|
|
|
#else
|
|
|
|
static inline void clear_soft_dirty(struct vm_area_struct *vma,
|
|
|
|
unsigned long addr, pte_t *pte)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
#endif
|
mm: soft-dirty bits for user memory changes tracking
The soft-dirty is a bit on a PTE which helps to track which pages a task
writes to. In order to do this tracking one should
1. Clear soft-dirty bits from PTEs ("echo 4 > /proc/PID/clear_refs)
2. Wait some time.
3. Read soft-dirty bits (55'th in /proc/PID/pagemap2 entries)
To do this tracking, the writable bit is cleared from PTEs when the
soft-dirty bit is. Thus, after this, when the task tries to modify a
page at some virtual address the #PF occurs and the kernel sets the
soft-dirty bit on the respective PTE.
Note, that although all the task's address space is marked as r/o after
the soft-dirty bits clear, the #PF-s that occur after that are processed
fast. This is so, since the pages are still mapped to physical memory,
and thus all the kernel does is finds this fact out and puts back
writable, dirty and soft-dirty bits on the PTE.
Another thing to note, is that when mremap moves PTEs they are marked
with soft-dirty as well, since from the user perspective mremap modifies
the virtual memory at mremap's new address.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 22:01:20 +00:00
|
|
|
|
2015-11-06 02:49:24 +00:00
|
|
|
#if defined(CONFIG_MEM_SOFT_DIRTY) && defined(CONFIG_TRANSPARENT_HUGEPAGE)
|
2015-02-11 23:28:08 +00:00
|
|
|
static inline void clear_soft_dirty_pmd(struct vm_area_struct *vma,
|
|
|
|
unsigned long addr, pmd_t *pmdp)
|
|
|
|
{
|
2018-02-01 00:18:20 +00:00
|
|
|
pmd_t old, pmd = *pmdp;
|
2017-04-13 21:56:28 +00:00
|
|
|
|
2017-09-08 23:11:04 +00:00
|
|
|
if (pmd_present(pmd)) {
|
|
|
|
/* See comment in change_huge_pmd() */
|
2018-02-01 00:18:20 +00:00
|
|
|
old = pmdp_invalidate(vma, addr, pmdp);
|
|
|
|
if (pmd_dirty(old))
|
2017-09-08 23:11:04 +00:00
|
|
|
pmd = pmd_mkdirty(pmd);
|
2018-02-01 00:18:20 +00:00
|
|
|
if (pmd_young(old))
|
2017-09-08 23:11:04 +00:00
|
|
|
pmd = pmd_mkyoung(pmd);
|
|
|
|
|
|
|
|
pmd = pmd_wrprotect(pmd);
|
|
|
|
pmd = pmd_clear_soft_dirty(pmd);
|
|
|
|
|
|
|
|
set_pmd_at(vma->vm_mm, addr, pmdp, pmd);
|
|
|
|
} else if (is_migration_entry(pmd_to_swp_entry(pmd))) {
|
|
|
|
pmd = pmd_swp_clear_soft_dirty(pmd);
|
|
|
|
set_pmd_at(vma->vm_mm, addr, pmdp, pmd);
|
|
|
|
}
|
2015-02-11 23:28:08 +00:00
|
|
|
}
|
|
|
|
#else
|
|
|
|
static inline void clear_soft_dirty_pmd(struct vm_area_struct *vma,
|
|
|
|
unsigned long addr, pmd_t *pmdp)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2008-02-05 06:29:03 +00:00
|
|
|
static int clear_refs_pte_range(pmd_t *pmd, unsigned long addr,
|
2008-06-12 22:21:47 +00:00
|
|
|
unsigned long end, struct mm_walk *walk)
|
2008-02-05 06:29:03 +00:00
|
|
|
{
|
2013-07-03 22:01:18 +00:00
|
|
|
struct clear_refs_private *cp = walk->private;
|
2015-02-11 23:27:46 +00:00
|
|
|
struct vm_area_struct *vma = walk->vma;
|
2008-02-05 06:29:03 +00:00
|
|
|
pte_t *pte, ptent;
|
|
|
|
spinlock_t *ptl;
|
|
|
|
struct page *page;
|
|
|
|
|
2016-01-22 00:40:25 +00:00
|
|
|
ptl = pmd_trans_huge_lock(pmd, vma);
|
|
|
|
if (ptl) {
|
2015-02-11 23:28:08 +00:00
|
|
|
if (cp->type == CLEAR_REFS_SOFT_DIRTY) {
|
|
|
|
clear_soft_dirty_pmd(vma, addr, pmd);
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
mm: thp: check pmd migration entry in common path
When THP migration is being used, memory management code needs to handle
pmd migration entries properly. This patch uses !pmd_present() or
is_swap_pmd() (depending on whether pmd_none() needs separate code or
not) to check pmd migration entries at the places where a pmd entry is
present.
Since pmd-related code uses split_huge_page(), split_huge_pmd(),
pmd_trans_huge(), pmd_trans_unstable(), or
pmd_none_or_trans_huge_or_clear_bad(), this patch:
1. adds pmd migration entry split code in split_huge_pmd(),
2. takes care of pmd migration entries whenever pmd_trans_huge() is present,
3. makes pmd_none_or_trans_huge_or_clear_bad() pmd migration entry aware.
Since split_huge_page() uses split_huge_pmd() and pmd_trans_unstable()
is equivalent to pmd_none_or_trans_huge_or_clear_bad(), we do not change
them.
Until this commit, a pmd entry should be:
1. pointing to a pte page,
2. is_swap_pmd(),
3. pmd_trans_huge(),
4. pmd_devmap(), or
5. pmd_none().
Signed-off-by: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Nellans <dnellans@nvidia.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 23:11:01 +00:00
|
|
|
if (!pmd_present(*pmd))
|
|
|
|
goto out;
|
|
|
|
|
2015-02-11 23:28:08 +00:00
|
|
|
page = pmd_page(*pmd);
|
|
|
|
|
|
|
|
/* Clear accessed and referenced bits. */
|
|
|
|
pmdp_test_and_clear_young(vma, addr, pmd);
|
mm: introduce idle page tracking
Knowing the portion of memory that is not used by a certain application or
memory cgroup (idle memory) can be useful for partitioning the system
efficiently, e.g. by setting memory cgroup limits appropriately.
Currently, the only means to estimate the amount of idle memory provided
by the kernel is /proc/PID/{clear_refs,smaps}: the user can clear the
access bit for all pages mapped to a particular process by writing 1 to
clear_refs, wait for some time, and then count smaps:Referenced. However,
this method has two serious shortcomings:
- it does not count unmapped file pages
- it affects the reclaimer logic
To overcome these drawbacks, this patch introduces two new page flags,
Idle and Young, and a new sysfs file, /sys/kernel/mm/page_idle/bitmap.
A page's Idle flag can only be set from userspace by setting bit in
/sys/kernel/mm/page_idle/bitmap at the offset corresponding to the page,
and it is cleared whenever the page is accessed either through page tables
(it is cleared in page_referenced() in this case) or using the read(2)
system call (mark_page_accessed()). Thus by setting the Idle flag for
pages of a particular workload, which can be found e.g. by reading
/proc/PID/pagemap, waiting for some time to let the workload access its
working set, and then reading the bitmap file, one can estimate the amount
of pages that are not used by the workload.
The Young page flag is used to avoid interference with the memory
reclaimer. A page's Young flag is set whenever the Access bit of a page
table entry pointing to the page is cleared by writing to the bitmap file.
If page_referenced() is called on a Young page, it will add 1 to its
return value, therefore concealing the fact that the Access bit was
cleared.
Note, since there is no room for extra page flags on 32 bit, this feature
uses extended page flags when compiled on 32 bit.
[akpm@linux-foundation.org: fix build]
[akpm@linux-foundation.org: kpageidle requires an MMU]
[akpm@linux-foundation.org: decouple from page-flags rework]
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Reviewed-by: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Greg Thelen <gthelen@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-09 22:35:45 +00:00
|
|
|
test_and_clear_page_young(page);
|
2015-02-11 23:28:08 +00:00
|
|
|
ClearPageReferenced(page);
|
|
|
|
out:
|
|
|
|
spin_unlock(ptl);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
mm: thp: fix pmd_bad() triggering in code paths holding mmap_sem read mode
In some cases it may happen that pmd_none_or_clear_bad() is called with
the mmap_sem hold in read mode. In those cases the huge page faults can
allocate hugepmds under pmd_none_or_clear_bad() and that can trigger a
false positive from pmd_bad() that will not like to see a pmd
materializing as trans huge.
It's not khugepaged causing the problem, khugepaged holds the mmap_sem
in write mode (and all those sites must hold the mmap_sem in read mode
to prevent pagetables to go away from under them, during code review it
seems vm86 mode on 32bit kernels requires that too unless it's
restricted to 1 thread per process or UP builds). The race is only with
the huge pagefaults that can convert a pmd_none() into a
pmd_trans_huge().
Effectively all these pmd_none_or_clear_bad() sites running with
mmap_sem in read mode are somewhat speculative with the page faults, and
the result is always undefined when they run simultaneously. This is
probably why it wasn't common to run into this. For example if the
madvise(MADV_DONTNEED) runs zap_page_range() shortly before the page
fault, the hugepage will not be zapped, if the page fault runs first it
will be zapped.
Altering pmd_bad() not to error out if it finds hugepmds won't be enough
to fix this, because zap_pmd_range would then proceed to call
zap_pte_range (which would be incorrect if the pmd become a
pmd_trans_huge()).
The simplest way to fix this is to read the pmd in the local stack
(regardless of what we read, no need of actual CPU barriers, only
compiler barrier needed), and be sure it is not changing under the code
that computes its value. Even if the real pmd is changing under the
value we hold on the stack, we don't care. If we actually end up in
zap_pte_range it means the pmd was not none already and it was not huge,
and it can't become huge from under us (khugepaged locking explained
above).
All we need is to enforce that there is no way anymore that in a code
path like below, pmd_trans_huge can be false, but pmd_none_or_clear_bad
can run into a hugepmd. The overhead of a barrier() is just a compiler
tweak and should not be measurable (I only added it for THP builds). I
don't exclude different compiler versions may have prevented the race
too by caching the value of *pmd on the stack (that hasn't been
verified, but it wouldn't be impossible considering
pmd_none_or_clear_bad, pmd_bad, pmd_trans_huge, pmd_none are all inlines
and there's no external function called in between pmd_trans_huge and
pmd_none_or_clear_bad).
if (pmd_trans_huge(*pmd)) {
if (next-addr != HPAGE_PMD_SIZE) {
VM_BUG_ON(!rwsem_is_locked(&tlb->mm->mmap_sem));
split_huge_page_pmd(vma->vm_mm, pmd);
} else if (zap_huge_pmd(tlb, vma, pmd, addr))
continue;
/* fall through */
}
if (pmd_none_or_clear_bad(pmd))
Because this race condition could be exercised without special
privileges this was reported in CVE-2012-1179.
The race was identified and fully explained by Ulrich who debugged it.
I'm quoting his accurate explanation below, for reference.
====== start quote =======
mapcount 0 page_mapcount 1
kernel BUG at mm/huge_memory.c:1384!
At some point prior to the panic, a "bad pmd ..." message similar to the
following is logged on the console:
mm/memory.c:145: bad pmd ffff8800376e1f98(80000000314000e7).
The "bad pmd ..." message is logged by pmd_clear_bad() before it clears
the page's PMD table entry.
143 void pmd_clear_bad(pmd_t *pmd)
144 {
-> 145 pmd_ERROR(*pmd);
146 pmd_clear(pmd);
147 }
After the PMD table entry has been cleared, there is an inconsistency
between the actual number of PMD table entries that are mapping the page
and the page's map count (_mapcount field in struct page). When the page
is subsequently reclaimed, __split_huge_page() detects this inconsistency.
1381 if (mapcount != page_mapcount(page))
1382 printk(KERN_ERR "mapcount %d page_mapcount %d\n",
1383 mapcount, page_mapcount(page));
-> 1384 BUG_ON(mapcount != page_mapcount(page));
The root cause of the problem is a race of two threads in a multithreaded
process. Thread B incurs a page fault on a virtual address that has never
been accessed (PMD entry is zero) while Thread A is executing an madvise()
system call on a virtual address within the same 2 MB (huge page) range.
virtual address space
.---------------------.
| |
| |
.-|---------------------|
| | |
| | |<-- B(fault)
| | |
2 MB | |/////////////////////|-.
huge < |/////////////////////| > A(range)
page | |/////////////////////|-'
| | |
| | |
'-|---------------------|
| |
| |
'---------------------'
- Thread A is executing an madvise(..., MADV_DONTNEED) system call
on the virtual address range "A(range)" shown in the picture.
sys_madvise
// Acquire the semaphore in shared mode.
down_read(¤t->mm->mmap_sem)
...
madvise_vma
switch (behavior)
case MADV_DONTNEED:
madvise_dontneed
zap_page_range
unmap_vmas
unmap_page_range
zap_pud_range
zap_pmd_range
//
// Assume that this huge page has never been accessed.
// I.e. content of the PMD entry is zero (not mapped).
//
if (pmd_trans_huge(*pmd)) {
// We don't get here due to the above assumption.
}
//
// Assume that Thread B incurred a page fault and
.---------> // sneaks in here as shown below.
| //
| if (pmd_none_or_clear_bad(pmd))
| {
| if (unlikely(pmd_bad(*pmd)))
| pmd_clear_bad
| {
| pmd_ERROR
| // Log "bad pmd ..." message here.
| pmd_clear
| // Clear the page's PMD entry.
| // Thread B incremented the map count
| // in page_add_new_anon_rmap(), but
| // now the page is no longer mapped
| // by a PMD entry (-> inconsistency).
| }
| }
|
v
- Thread B is handling a page fault on virtual address "B(fault)" shown
in the picture.
...
do_page_fault
__do_page_fault
// Acquire the semaphore in shared mode.
down_read_trylock(&mm->mmap_sem)
...
handle_mm_fault
if (pmd_none(*pmd) && transparent_hugepage_enabled(vma))
// We get here due to the above assumption (PMD entry is zero).
do_huge_pmd_anonymous_page
alloc_hugepage_vma
// Allocate a new transparent huge page here.
...
__do_huge_pmd_anonymous_page
...
spin_lock(&mm->page_table_lock)
...
page_add_new_anon_rmap
// Here we increment the page's map count (starts at -1).
atomic_set(&page->_mapcount, 0)
set_pmd_at
// Here we set the page's PMD entry which will be cleared
// when Thread A calls pmd_clear_bad().
...
spin_unlock(&mm->page_table_lock)
The mmap_sem does not prevent the race because both threads are acquiring
it in shared mode (down_read). Thread B holds the page_table_lock while
the page's map count and PMD table entry are updated. However, Thread A
does not synchronize on that lock.
====== end quote =======
[akpm@linux-foundation.org: checkpatch fixes]
Reported-by: Ulrich Obergfell <uobergfe@redhat.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Jones <davej@redhat.com>
Acked-by: Larry Woodman <lwoodman@redhat.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: <stable@vger.kernel.org> [2.6.38+]
Cc: Mark Salter <msalter@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:33:42 +00:00
|
|
|
if (pmd_trans_unstable(pmd))
|
|
|
|
return 0;
|
2011-03-22 23:32:56 +00:00
|
|
|
|
2008-02-05 06:29:03 +00:00
|
|
|
pte = pte_offset_map_lock(vma->vm_mm, pmd, addr, &ptl);
|
|
|
|
for (; addr != end; pte++, addr += PAGE_SIZE) {
|
|
|
|
ptent = *pte;
|
|
|
|
|
mm: soft-dirty bits for user memory changes tracking
The soft-dirty is a bit on a PTE which helps to track which pages a task
writes to. In order to do this tracking one should
1. Clear soft-dirty bits from PTEs ("echo 4 > /proc/PID/clear_refs)
2. Wait some time.
3. Read soft-dirty bits (55'th in /proc/PID/pagemap2 entries)
To do this tracking, the writable bit is cleared from PTEs when the
soft-dirty bit is. Thus, after this, when the task tries to modify a
page at some virtual address the #PF occurs and the kernel sets the
soft-dirty bit on the respective PTE.
Note, that although all the task's address space is marked as r/o after
the soft-dirty bits clear, the #PF-s that occur after that are processed
fast. This is so, since the pages are still mapped to physical memory,
and thus all the kernel does is finds this fact out and puts back
writable, dirty and soft-dirty bits on the PTE.
Another thing to note, is that when mremap moves PTEs they are marked
with soft-dirty as well, since from the user perspective mremap modifies
the virtual memory at mremap's new address.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 22:01:20 +00:00
|
|
|
if (cp->type == CLEAR_REFS_SOFT_DIRTY) {
|
|
|
|
clear_soft_dirty(vma, addr, pte);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
2013-08-13 23:00:49 +00:00
|
|
|
if (!pte_present(ptent))
|
|
|
|
continue;
|
|
|
|
|
2008-02-05 06:29:03 +00:00
|
|
|
page = vm_normal_page(vma, addr, ptent);
|
|
|
|
if (!page)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
/* Clear accessed and referenced bits. */
|
|
|
|
ptep_test_and_clear_young(vma, addr, pte);
|
mm: introduce idle page tracking
Knowing the portion of memory that is not used by a certain application or
memory cgroup (idle memory) can be useful for partitioning the system
efficiently, e.g. by setting memory cgroup limits appropriately.
Currently, the only means to estimate the amount of idle memory provided
by the kernel is /proc/PID/{clear_refs,smaps}: the user can clear the
access bit for all pages mapped to a particular process by writing 1 to
clear_refs, wait for some time, and then count smaps:Referenced. However,
this method has two serious shortcomings:
- it does not count unmapped file pages
- it affects the reclaimer logic
To overcome these drawbacks, this patch introduces two new page flags,
Idle and Young, and a new sysfs file, /sys/kernel/mm/page_idle/bitmap.
A page's Idle flag can only be set from userspace by setting bit in
/sys/kernel/mm/page_idle/bitmap at the offset corresponding to the page,
and it is cleared whenever the page is accessed either through page tables
(it is cleared in page_referenced() in this case) or using the read(2)
system call (mark_page_accessed()). Thus by setting the Idle flag for
pages of a particular workload, which can be found e.g. by reading
/proc/PID/pagemap, waiting for some time to let the workload access its
working set, and then reading the bitmap file, one can estimate the amount
of pages that are not used by the workload.
The Young page flag is used to avoid interference with the memory
reclaimer. A page's Young flag is set whenever the Access bit of a page
table entry pointing to the page is cleared by writing to the bitmap file.
If page_referenced() is called on a Young page, it will add 1 to its
return value, therefore concealing the fact that the Access bit was
cleared.
Note, since there is no room for extra page flags on 32 bit, this feature
uses extended page flags when compiled on 32 bit.
[akpm@linux-foundation.org: fix build]
[akpm@linux-foundation.org: kpageidle requires an MMU]
[akpm@linux-foundation.org: decouple from page-flags rework]
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Reviewed-by: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Greg Thelen <gthelen@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-09 22:35:45 +00:00
|
|
|
test_and_clear_page_young(page);
|
2008-02-05 06:29:03 +00:00
|
|
|
ClearPageReferenced(page);
|
|
|
|
}
|
|
|
|
pte_unmap_unlock(pte - 1, ptl);
|
|
|
|
cond_resched();
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2015-02-11 23:27:46 +00:00
|
|
|
static int clear_refs_test_walk(unsigned long start, unsigned long end,
|
|
|
|
struct mm_walk *walk)
|
|
|
|
{
|
|
|
|
struct clear_refs_private *cp = walk->private;
|
|
|
|
struct vm_area_struct *vma = walk->vma;
|
|
|
|
|
2015-02-11 23:28:06 +00:00
|
|
|
if (vma->vm_flags & VM_PFNMAP)
|
|
|
|
return 1;
|
|
|
|
|
2015-02-11 23:27:46 +00:00
|
|
|
/*
|
|
|
|
* Writing 1 to /proc/pid/clear_refs affects all pages.
|
|
|
|
* Writing 2 to /proc/pid/clear_refs only affects anonymous pages.
|
|
|
|
* Writing 3 to /proc/pid/clear_refs only affects file mapped pages.
|
|
|
|
* Writing 4 to /proc/pid/clear_refs affects all pages.
|
|
|
|
*/
|
|
|
|
if (cp->type == CLEAR_REFS_ANON && vma->vm_file)
|
|
|
|
return 1;
|
|
|
|
if (cp->type == CLEAR_REFS_MAPPED && !vma->vm_file)
|
|
|
|
return 1;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2019-08-28 14:19:54 +00:00
|
|
|
static const struct mm_walk_ops clear_refs_walk_ops = {
|
|
|
|
.pmd_entry = clear_refs_pte_range,
|
|
|
|
.test_walk = clear_refs_test_walk,
|
|
|
|
};
|
|
|
|
|
2008-02-05 06:29:03 +00:00
|
|
|
static ssize_t clear_refs_write(struct file *file, const char __user *buf,
|
|
|
|
size_t count, loff_t *ppos)
|
2007-05-06 21:49:24 +00:00
|
|
|
{
|
2008-02-05 06:29:03 +00:00
|
|
|
struct task_struct *task;
|
2009-09-22 23:45:36 +00:00
|
|
|
char buffer[PROC_NUMBUF];
|
2008-02-05 06:29:03 +00:00
|
|
|
struct mm_struct *mm;
|
2007-05-06 21:49:24 +00:00
|
|
|
struct vm_area_struct *vma;
|
clear_refs: sanitize accepted commands declaration
This is the implementation of the soft-dirty bit concept that should
help keep track of changes in user memory, which in turn is very-very
required by the checkpoint-restore project (http://criu.org).
To create a dump of an application(s) we save all the information about
it to files, and the biggest part of such dump is the contents of tasks'
memory. However, there are usage scenarios where it's not required to
get _all_ the task memory while creating a dump. For example, when
doing periodical dumps, it's only required to take full memory dump only
at the first step and then take incremental changes of memory. Another
example is live migration. We copy all the memory to the destination
node without stopping all tasks, then stop them, check for what pages
has changed, dump it and the rest of the state, then copy it to the
destination node. This decreases freeze time significantly.
That said, some help from kernel to watch how processes modify the
contents of their memory is required.
The proposal is to track changes with the help of new soft-dirty bit
this way:
1. First do "echo 4 > /proc/$pid/clear_refs".
At that point kernel clears the soft dirty _and_ the writable bits from all
ptes of process $pid. From now on every write to any page will result in #pf
and the subsequent call to pte_mkdirty/pmd_mkdirty, which in turn will set
the soft dirty flag.
2. Then read the /proc/$pid/pagemap2 and check the soft-dirty bit reported there
(the 55'th one). If set, the respective pte was written to since last call
to clear refs.
The soft-dirty bit is the _PAGE_BIT_HIDDEN one. Although it's used by
kmemcheck, the latter one marks kernel pages with it, while the former
bit is put on user pages so they do not conflict to each other.
This patch:
A new clear-refs type will be added in the next patch, so prepare
code for that.
[akpm@linux-foundation.org: don't assume that sizeof(enum clear_refs_types) == sizeof(int)]
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 22:01:16 +00:00
|
|
|
enum clear_refs_types type;
|
|
|
|
int itype;
|
2011-05-26 23:25:50 +00:00
|
|
|
int rv;
|
2007-05-06 21:49:24 +00:00
|
|
|
|
2008-02-05 06:29:03 +00:00
|
|
|
memset(buffer, 0, sizeof(buffer));
|
|
|
|
if (count > sizeof(buffer) - 1)
|
|
|
|
count = sizeof(buffer) - 1;
|
|
|
|
if (copy_from_user(buffer, buf, count))
|
|
|
|
return -EFAULT;
|
clear_refs: sanitize accepted commands declaration
This is the implementation of the soft-dirty bit concept that should
help keep track of changes in user memory, which in turn is very-very
required by the checkpoint-restore project (http://criu.org).
To create a dump of an application(s) we save all the information about
it to files, and the biggest part of such dump is the contents of tasks'
memory. However, there are usage scenarios where it's not required to
get _all_ the task memory while creating a dump. For example, when
doing periodical dumps, it's only required to take full memory dump only
at the first step and then take incremental changes of memory. Another
example is live migration. We copy all the memory to the destination
node without stopping all tasks, then stop them, check for what pages
has changed, dump it and the rest of the state, then copy it to the
destination node. This decreases freeze time significantly.
That said, some help from kernel to watch how processes modify the
contents of their memory is required.
The proposal is to track changes with the help of new soft-dirty bit
this way:
1. First do "echo 4 > /proc/$pid/clear_refs".
At that point kernel clears the soft dirty _and_ the writable bits from all
ptes of process $pid. From now on every write to any page will result in #pf
and the subsequent call to pte_mkdirty/pmd_mkdirty, which in turn will set
the soft dirty flag.
2. Then read the /proc/$pid/pagemap2 and check the soft-dirty bit reported there
(the 55'th one). If set, the respective pte was written to since last call
to clear refs.
The soft-dirty bit is the _PAGE_BIT_HIDDEN one. Although it's used by
kmemcheck, the latter one marks kernel pages with it, while the former
bit is put on user pages so they do not conflict to each other.
This patch:
A new clear-refs type will be added in the next patch, so prepare
code for that.
[akpm@linux-foundation.org: don't assume that sizeof(enum clear_refs_types) == sizeof(int)]
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 22:01:16 +00:00
|
|
|
rv = kstrtoint(strstrip(buffer), 10, &itype);
|
2011-05-26 23:25:50 +00:00
|
|
|
if (rv < 0)
|
|
|
|
return rv;
|
clear_refs: sanitize accepted commands declaration
This is the implementation of the soft-dirty bit concept that should
help keep track of changes in user memory, which in turn is very-very
required by the checkpoint-restore project (http://criu.org).
To create a dump of an application(s) we save all the information about
it to files, and the biggest part of such dump is the contents of tasks'
memory. However, there are usage scenarios where it's not required to
get _all_ the task memory while creating a dump. For example, when
doing periodical dumps, it's only required to take full memory dump only
at the first step and then take incremental changes of memory. Another
example is live migration. We copy all the memory to the destination
node without stopping all tasks, then stop them, check for what pages
has changed, dump it and the rest of the state, then copy it to the
destination node. This decreases freeze time significantly.
That said, some help from kernel to watch how processes modify the
contents of their memory is required.
The proposal is to track changes with the help of new soft-dirty bit
this way:
1. First do "echo 4 > /proc/$pid/clear_refs".
At that point kernel clears the soft dirty _and_ the writable bits from all
ptes of process $pid. From now on every write to any page will result in #pf
and the subsequent call to pte_mkdirty/pmd_mkdirty, which in turn will set
the soft dirty flag.
2. Then read the /proc/$pid/pagemap2 and check the soft-dirty bit reported there
(the 55'th one). If set, the respective pte was written to since last call
to clear refs.
The soft-dirty bit is the _PAGE_BIT_HIDDEN one. Although it's used by
kmemcheck, the latter one marks kernel pages with it, while the former
bit is put on user pages so they do not conflict to each other.
This patch:
A new clear-refs type will be added in the next patch, so prepare
code for that.
[akpm@linux-foundation.org: don't assume that sizeof(enum clear_refs_types) == sizeof(int)]
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 22:01:16 +00:00
|
|
|
type = (enum clear_refs_types)itype;
|
|
|
|
if (type < CLEAR_REFS_ALL || type >= CLEAR_REFS_LAST)
|
2008-02-05 06:29:03 +00:00
|
|
|
return -EINVAL;
|
2013-07-03 22:01:22 +00:00
|
|
|
|
2013-01-23 22:07:38 +00:00
|
|
|
task = get_proc_task(file_inode(file));
|
2008-02-05 06:29:03 +00:00
|
|
|
if (!task)
|
|
|
|
return -ESRCH;
|
|
|
|
mm = get_task_mm(task);
|
|
|
|
if (mm) {
|
2018-12-28 08:38:09 +00:00
|
|
|
struct mmu_notifier_range range;
|
2013-07-03 22:01:18 +00:00
|
|
|
struct clear_refs_private cp = {
|
mm: soft-dirty bits for user memory changes tracking
The soft-dirty is a bit on a PTE which helps to track which pages a task
writes to. In order to do this tracking one should
1. Clear soft-dirty bits from PTEs ("echo 4 > /proc/PID/clear_refs)
2. Wait some time.
3. Read soft-dirty bits (55'th in /proc/PID/pagemap2 entries)
To do this tracking, the writable bit is cleared from PTEs when the
soft-dirty bit is. Thus, after this, when the task tries to modify a
page at some virtual address the #PF occurs and the kernel sets the
soft-dirty bit on the respective PTE.
Note, that although all the task's address space is marked as r/o after
the soft-dirty bits clear, the #PF-s that occur after that are processed
fast. This is so, since the pages are still mapped to physical memory,
and thus all the kernel does is finds this fact out and puts back
writable, dirty and soft-dirty bits on the PTE.
Another thing to note, is that when mremap moves PTEs they are marked
with soft-dirty as well, since from the user perspective mremap modifies
the virtual memory at mremap's new address.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 22:01:20 +00:00
|
|
|
.type = type,
|
2013-07-03 22:01:18 +00:00
|
|
|
};
|
2015-02-12 23:01:00 +00:00
|
|
|
|
2021-01-08 21:13:41 +00:00
|
|
|
if (mmap_write_lock_killable(mm)) {
|
|
|
|
count = -EINTR;
|
|
|
|
goto out_mm;
|
|
|
|
}
|
2015-02-12 23:01:00 +00:00
|
|
|
if (type == CLEAR_REFS_MM_HIWATER_RSS) {
|
|
|
|
/*
|
|
|
|
* Writing 5 to /proc/pid/clear_refs resets the peak
|
|
|
|
* resident set size to this mm's current rss value.
|
|
|
|
*/
|
|
|
|
reset_mm_hiwater_rss(mm);
|
2021-01-08 21:13:41 +00:00
|
|
|
goto out_unlock;
|
2015-02-12 23:01:00 +00:00
|
|
|
}
|
|
|
|
|
mm: softdirty: enable write notifications on VMAs after VM_SOFTDIRTY cleared
For VMAs that don't want write notifications, PTEs created for read faults
have their write bit set. If the read fault happens after VM_SOFTDIRTY is
cleared, then the PTE's softdirty bit will remain clear after subsequent
writes.
Here's a simple code snippet to demonstrate the bug:
char* m = mmap(NULL, getpagesize(), PROT_READ | PROT_WRITE,
MAP_ANONYMOUS | MAP_SHARED, -1, 0);
system("echo 4 > /proc/$PPID/clear_refs"); /* clear VM_SOFTDIRTY */
assert(*m == '\0'); /* new PTE allows write access */
assert(!soft_dirty(x));
*m = 'x'; /* should dirty the page */
assert(soft_dirty(x)); /* fails */
With this patch, write notifications are enabled when VM_SOFTDIRTY is
cleared. Furthermore, to avoid unnecessary faults, write notifications
are disabled when VM_SOFTDIRTY is set.
As a side effect of enabling and disabling write notifications with
care, this patch fixes a bug in mprotect where vm_page_prot bits set by
drivers were zapped on mprotect. An analogous bug was fixed in mmap by
commit c9d0bf241451 ("mm: uncached vma support with writenotify").
Signed-off-by: Peter Feiner <pfeiner@google.com>
Reported-by: Peter Feiner <pfeiner@google.com>
Suggested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Jamie Liu <jamieliu@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-13 22:55:46 +00:00
|
|
|
if (type == CLEAR_REFS_SOFT_DIRTY) {
|
|
|
|
for (vma = mm->mmap; vma; vma = vma->vm_next) {
|
|
|
|
if (!(vma->vm_flags & VM_SOFTDIRTY))
|
|
|
|
continue;
|
2021-01-08 21:13:41 +00:00
|
|
|
vma->vm_flags &= ~VM_SOFTDIRTY;
|
|
|
|
vma_set_page_prot(vma);
|
mm: softdirty: enable write notifications on VMAs after VM_SOFTDIRTY cleared
For VMAs that don't want write notifications, PTEs created for read faults
have their write bit set. If the read fault happens after VM_SOFTDIRTY is
cleared, then the PTE's softdirty bit will remain clear after subsequent
writes.
Here's a simple code snippet to demonstrate the bug:
char* m = mmap(NULL, getpagesize(), PROT_READ | PROT_WRITE,
MAP_ANONYMOUS | MAP_SHARED, -1, 0);
system("echo 4 > /proc/$PPID/clear_refs"); /* clear VM_SOFTDIRTY */
assert(*m == '\0'); /* new PTE allows write access */
assert(!soft_dirty(x));
*m = 'x'; /* should dirty the page */
assert(soft_dirty(x)); /* fails */
With this patch, write notifications are enabled when VM_SOFTDIRTY is
cleared. Furthermore, to avoid unnecessary faults, write notifications
are disabled when VM_SOFTDIRTY is set.
As a side effect of enabling and disabling write notifications with
care, this patch fixes a bug in mprotect where vm_page_prot bits set by
drivers were zapped on mprotect. An analogous bug was fixed in mmap by
commit c9d0bf241451 ("mm: uncached vma support with writenotify").
Signed-off-by: Peter Feiner <pfeiner@google.com>
Reported-by: Peter Feiner <pfeiner@google.com>
Suggested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Jamie Liu <jamieliu@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-13 22:55:46 +00:00
|
|
|
}
|
2018-12-28 08:38:09 +00:00
|
|
|
|
2021-01-27 23:53:42 +00:00
|
|
|
inc_tlb_flush_pending(mm);
|
2019-05-14 00:20:53 +00:00
|
|
|
mmu_notifier_range_init(&range, MMU_NOTIFY_SOFT_DIRTY,
|
|
|
|
0, NULL, mm, 0, -1UL);
|
2018-12-28 08:38:09 +00:00
|
|
|
mmu_notifier_invalidate_range_start(&range);
|
mm: softdirty: enable write notifications on VMAs after VM_SOFTDIRTY cleared
For VMAs that don't want write notifications, PTEs created for read faults
have their write bit set. If the read fault happens after VM_SOFTDIRTY is
cleared, then the PTE's softdirty bit will remain clear after subsequent
writes.
Here's a simple code snippet to demonstrate the bug:
char* m = mmap(NULL, getpagesize(), PROT_READ | PROT_WRITE,
MAP_ANONYMOUS | MAP_SHARED, -1, 0);
system("echo 4 > /proc/$PPID/clear_refs"); /* clear VM_SOFTDIRTY */
assert(*m == '\0'); /* new PTE allows write access */
assert(!soft_dirty(x));
*m = 'x'; /* should dirty the page */
assert(soft_dirty(x)); /* fails */
With this patch, write notifications are enabled when VM_SOFTDIRTY is
cleared. Furthermore, to avoid unnecessary faults, write notifications
are disabled when VM_SOFTDIRTY is set.
As a side effect of enabling and disabling write notifications with
care, this patch fixes a bug in mprotect where vm_page_prot bits set by
drivers were zapped on mprotect. An analogous bug was fixed in mmap by
commit c9d0bf241451 ("mm: uncached vma support with writenotify").
Signed-off-by: Peter Feiner <pfeiner@google.com>
Reported-by: Peter Feiner <pfeiner@google.com>
Suggested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Jamie Liu <jamieliu@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-13 22:55:46 +00:00
|
|
|
}
|
2019-08-28 14:19:54 +00:00
|
|
|
walk_page_range(mm, 0, mm->highest_vm_end, &clear_refs_walk_ops,
|
|
|
|
&cp);
|
2021-01-27 23:53:42 +00:00
|
|
|
if (type == CLEAR_REFS_SOFT_DIRTY) {
|
2018-12-28 08:38:09 +00:00
|
|
|
mmu_notifier_invalidate_range_end(&range);
|
2021-01-27 23:53:42 +00:00
|
|
|
flush_tlb_mm(mm);
|
|
|
|
dec_tlb_flush_pending(mm);
|
|
|
|
}
|
2021-01-08 21:13:41 +00:00
|
|
|
out_unlock:
|
|
|
|
mmap_write_unlock(mm);
|
2015-02-12 23:01:00 +00:00
|
|
|
out_mm:
|
2008-02-05 06:29:03 +00:00
|
|
|
mmput(mm);
|
|
|
|
}
|
|
|
|
put_task_struct(task);
|
2009-09-22 23:45:36 +00:00
|
|
|
|
|
|
|
return count;
|
2007-05-06 21:49:24 +00:00
|
|
|
}
|
|
|
|
|
2008-02-05 06:29:03 +00:00
|
|
|
const struct file_operations proc_clear_refs_operations = {
|
|
|
|
.write = clear_refs_write,
|
llseek: automatically add .llseek fop
All file_operations should get a .llseek operation so we can make
nonseekable_open the default for future file operations without a
.llseek pointer.
The three cases that we can automatically detect are no_llseek, seq_lseek
and default_llseek. For cases where we can we can automatically prove that
the file offset is always ignored, we use noop_llseek, which maintains
the current behavior of not returning an error from a seek.
New drivers should normally not use noop_llseek but instead use no_llseek
and call nonseekable_open at open time. Existing drivers can be converted
to do the same when the maintainer knows for certain that no user code
relies on calling seek on the device file.
The generated code is often incorrectly indented and right now contains
comments that clarify for each added line why a specific variant was
chosen. In the version that gets submitted upstream, the comments will
be gone and I will manually fix the indentation, because there does not
seem to be a way to do that using coccinelle.
Some amount of new code is currently sitting in linux-next that should get
the same modifications, which I will do at the end of the merge window.
Many thanks to Julia Lawall for helping me learn to write a semantic
patch that does all this.
===== begin semantic patch =====
// This adds an llseek= method to all file operations,
// as a preparation for making no_llseek the default.
//
// The rules are
// - use no_llseek explicitly if we do nonseekable_open
// - use seq_lseek for sequential files
// - use default_llseek if we know we access f_pos
// - use noop_llseek if we know we don't access f_pos,
// but we still want to allow users to call lseek
//
@ open1 exists @
identifier nested_open;
@@
nested_open(...)
{
<+...
nonseekable_open(...)
...+>
}
@ open exists@
identifier open_f;
identifier i, f;
identifier open1.nested_open;
@@
int open_f(struct inode *i, struct file *f)
{
<+...
(
nonseekable_open(...)
|
nested_open(...)
)
...+>
}
@ read disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
<+...
(
*off = E
|
*off += E
|
func(..., off, ...)
|
E = *off
)
...+>
}
@ read_no_fpos disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
... when != off
}
@ write @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
<+...
(
*off = E
|
*off += E
|
func(..., off, ...)
|
E = *off
)
...+>
}
@ write_no_fpos @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
... when != off
}
@ fops0 @
identifier fops;
@@
struct file_operations fops = {
...
};
@ has_llseek depends on fops0 @
identifier fops0.fops;
identifier llseek_f;
@@
struct file_operations fops = {
...
.llseek = llseek_f,
...
};
@ has_read depends on fops0 @
identifier fops0.fops;
identifier read_f;
@@
struct file_operations fops = {
...
.read = read_f,
...
};
@ has_write depends on fops0 @
identifier fops0.fops;
identifier write_f;
@@
struct file_operations fops = {
...
.write = write_f,
...
};
@ has_open depends on fops0 @
identifier fops0.fops;
identifier open_f;
@@
struct file_operations fops = {
...
.open = open_f,
...
};
// use no_llseek if we call nonseekable_open
////////////////////////////////////////////
@ nonseekable1 depends on !has_llseek && has_open @
identifier fops0.fops;
identifier nso ~= "nonseekable_open";
@@
struct file_operations fops = {
... .open = nso, ...
+.llseek = no_llseek, /* nonseekable */
};
@ nonseekable2 depends on !has_llseek @
identifier fops0.fops;
identifier open.open_f;
@@
struct file_operations fops = {
... .open = open_f, ...
+.llseek = no_llseek, /* open uses nonseekable */
};
// use seq_lseek for sequential files
/////////////////////////////////////
@ seq depends on !has_llseek @
identifier fops0.fops;
identifier sr ~= "seq_read";
@@
struct file_operations fops = {
... .read = sr, ...
+.llseek = seq_lseek, /* we have seq_read */
};
// use default_llseek if there is a readdir
///////////////////////////////////////////
@ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier readdir_e;
@@
// any other fop is used that changes pos
struct file_operations fops = {
... .readdir = readdir_e, ...
+.llseek = default_llseek, /* readdir is present */
};
// use default_llseek if at least one of read/write touches f_pos
/////////////////////////////////////////////////////////////////
@ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read.read_f;
@@
// read fops use offset
struct file_operations fops = {
... .read = read_f, ...
+.llseek = default_llseek, /* read accesses f_pos */
};
@ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write.write_f;
@@
// write fops use offset
struct file_operations fops = {
... .write = write_f, ...
+ .llseek = default_llseek, /* write accesses f_pos */
};
// Use noop_llseek if neither read nor write accesses f_pos
///////////////////////////////////////////////////////////
@ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
identifier write_no_fpos.write_f;
@@
// write fops use offset
struct file_operations fops = {
...
.write = write_f,
.read = read_f,
...
+.llseek = noop_llseek, /* read and write both use no f_pos */
};
@ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write_no_fpos.write_f;
@@
struct file_operations fops = {
... .write = write_f, ...
+.llseek = noop_llseek, /* write uses no f_pos */
};
@ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
@@
struct file_operations fops = {
... .read = read_f, ...
+.llseek = noop_llseek, /* read uses no f_pos */
};
@ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
@@
struct file_operations fops = {
...
+.llseek = noop_llseek, /* no read or write fn */
};
===== End semantic patch =====
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Julia Lawall <julia@diku.dk>
Cc: Christoph Hellwig <hch@infradead.org>
2010-08-15 16:52:59 +00:00
|
|
|
.llseek = noop_llseek,
|
2008-02-05 06:29:03 +00:00
|
|
|
};
|
|
|
|
|
2012-03-21 23:33:59 +00:00
|
|
|
typedef struct {
|
|
|
|
u64 pme;
|
|
|
|
} pagemap_entry_t;
|
|
|
|
|
2008-02-05 06:29:04 +00:00
|
|
|
struct pagemapread {
|
2013-08-13 23:01:03 +00:00
|
|
|
int pos, len; /* units: PM_ENTRY_BYTES, not bytes */
|
2012-03-21 23:33:59 +00:00
|
|
|
pagemap_entry_t *buffer;
|
2015-09-08 22:00:07 +00:00
|
|
|
bool show_pfn;
|
2008-02-05 06:29:04 +00:00
|
|
|
};
|
|
|
|
|
2012-03-21 23:33:57 +00:00
|
|
|
#define PAGEMAP_WALK_SIZE (PMD_SIZE)
|
|
|
|
#define PAGEMAP_WALK_MASK (PMD_MASK)
|
|
|
|
|
2015-09-08 22:00:02 +00:00
|
|
|
#define PM_ENTRY_BYTES sizeof(pagemap_entry_t)
|
|
|
|
#define PM_PFRAME_BITS 55
|
|
|
|
#define PM_PFRAME_MASK GENMASK_ULL(PM_PFRAME_BITS - 1, 0)
|
|
|
|
#define PM_SOFT_DIRTY BIT_ULL(55)
|
2015-09-08 22:00:10 +00:00
|
|
|
#define PM_MMAP_EXCLUSIVE BIT_ULL(56)
|
2015-09-08 22:00:02 +00:00
|
|
|
#define PM_FILE BIT_ULL(61)
|
|
|
|
#define PM_SWAP BIT_ULL(62)
|
|
|
|
#define PM_PRESENT BIT_ULL(63)
|
|
|
|
|
2008-02-05 06:29:04 +00:00
|
|
|
#define PM_END_OF_BUFFER 1
|
|
|
|
|
2015-09-08 22:00:02 +00:00
|
|
|
static inline pagemap_entry_t make_pme(u64 frame, u64 flags)
|
2012-03-21 23:33:59 +00:00
|
|
|
{
|
2015-09-08 22:00:02 +00:00
|
|
|
return (pagemap_entry_t) { .pme = (frame & PM_PFRAME_MASK) | flags };
|
2012-03-21 23:33:59 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static int add_to_pagemap(unsigned long addr, pagemap_entry_t *pme,
|
2008-02-05 06:29:04 +00:00
|
|
|
struct pagemapread *pm)
|
|
|
|
{
|
2012-03-21 23:33:59 +00:00
|
|
|
pm->buffer[pm->pos++] = *pme;
|
2010-04-02 00:11:29 +00:00
|
|
|
if (pm->pos >= pm->len)
|
2008-06-06 05:46:31 +00:00
|
|
|
return PM_END_OF_BUFFER;
|
2008-02-05 06:29:04 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int pagemap_pte_hole(unsigned long start, unsigned long end,
|
2020-02-04 01:36:03 +00:00
|
|
|
__always_unused int depth, struct mm_walk *walk)
|
2008-02-05 06:29:04 +00:00
|
|
|
{
|
2008-06-12 22:21:47 +00:00
|
|
|
struct pagemapread *pm = walk->private;
|
2014-08-06 23:08:09 +00:00
|
|
|
unsigned long addr = start;
|
2008-02-05 06:29:04 +00:00
|
|
|
int err = 0;
|
2012-03-21 23:33:59 +00:00
|
|
|
|
2014-08-06 23:08:09 +00:00
|
|
|
while (addr < end) {
|
|
|
|
struct vm_area_struct *vma = find_vma(walk->mm, addr);
|
2015-09-08 22:00:02 +00:00
|
|
|
pagemap_entry_t pme = make_pme(0, 0);
|
2014-09-25 23:05:18 +00:00
|
|
|
/* End of address space hole, which we mark as non-present. */
|
|
|
|
unsigned long hole_end;
|
2014-08-06 23:08:09 +00:00
|
|
|
|
2014-09-25 23:05:18 +00:00
|
|
|
if (vma)
|
|
|
|
hole_end = min(end, vma->vm_start);
|
|
|
|
else
|
|
|
|
hole_end = end;
|
|
|
|
|
|
|
|
for (; addr < hole_end; addr += PAGE_SIZE) {
|
|
|
|
err = add_to_pagemap(addr, &pme, pm);
|
|
|
|
if (err)
|
|
|
|
goto out;
|
2014-08-06 23:08:09 +00:00
|
|
|
}
|
|
|
|
|
2014-09-25 23:05:18 +00:00
|
|
|
if (!vma)
|
|
|
|
break;
|
|
|
|
|
|
|
|
/* Addresses in the VMA. */
|
|
|
|
if (vma->vm_flags & VM_SOFTDIRTY)
|
2015-09-08 22:00:02 +00:00
|
|
|
pme = make_pme(0, PM_SOFT_DIRTY);
|
2014-09-25 23:05:18 +00:00
|
|
|
for (; addr < min(end, vma->vm_end); addr += PAGE_SIZE) {
|
2014-08-06 23:08:09 +00:00
|
|
|
err = add_to_pagemap(addr, &pme, pm);
|
|
|
|
if (err)
|
|
|
|
goto out;
|
|
|
|
}
|
2008-02-05 06:29:04 +00:00
|
|
|
}
|
2014-08-06 23:08:09 +00:00
|
|
|
out:
|
2008-02-05 06:29:04 +00:00
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
2015-09-08 22:00:02 +00:00
|
|
|
static pagemap_entry_t pte_to_pagemap_entry(struct pagemapread *pm,
|
proc: report file/anon bit in /proc/pid/pagemap
This is an implementation of Andrew's proposal to extend the pagemap file
bits to report what is missing about tasks' working set.
The problem with the working set detection is multilateral. In the criu
(checkpoint/restore) project we dump the tasks' memory into image files
and to do it properly we need to detect which pages inside mappings are
really in use. The mincore syscall I though could help with this did not.
First, it doesn't report swapped pages, thus we cannot find out which
parts of anonymous mappings to dump. Next, it does report pages from page
cache as present even if they are not mapped, and it doesn't make that has
not been cow-ed.
Note, that issue with swap pages is critical -- we must dump swap pages to
image file. But the issues with file pages are optimization -- we can
take all file pages to image, this would be correct, but if we know that a
page is not mapped or not cow-ed, we can remove them from dump file. The
dump would still be self-consistent, though significantly smaller in size
(up to 10 times smaller on real apps).
Andrew noticed, that the proc pagemap file solved 2 of 3 above issues --
it reports whether a page is present or swapped and it doesn't report not
mapped page cache pages. But, it doesn't distinguish cow-ed file pages
from not cow-ed.
I would like to make the last unused bit in this file to report whether the
page mapped into respective pte is PageAnon or not.
[comment stolen from Pavel Emelyanov's v1 patch]
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 23:26:19 +00:00
|
|
|
struct vm_area_struct *vma, unsigned long addr, pte_t pte)
|
2008-02-05 06:29:04 +00:00
|
|
|
{
|
2015-09-08 22:00:02 +00:00
|
|
|
u64 frame = 0, flags = 0;
|
proc: report file/anon bit in /proc/pid/pagemap
This is an implementation of Andrew's proposal to extend the pagemap file
bits to report what is missing about tasks' working set.
The problem with the working set detection is multilateral. In the criu
(checkpoint/restore) project we dump the tasks' memory into image files
and to do it properly we need to detect which pages inside mappings are
really in use. The mincore syscall I though could help with this did not.
First, it doesn't report swapped pages, thus we cannot find out which
parts of anonymous mappings to dump. Next, it does report pages from page
cache as present even if they are not mapped, and it doesn't make that has
not been cow-ed.
Note, that issue with swap pages is critical -- we must dump swap pages to
image file. But the issues with file pages are optimization -- we can
take all file pages to image, this would be correct, but if we know that a
page is not mapped or not cow-ed, we can remove them from dump file. The
dump would still be self-consistent, though significantly smaller in size
(up to 10 times smaller on real apps).
Andrew noticed, that the proc pagemap file solved 2 of 3 above issues --
it reports whether a page is present or swapped and it doesn't report not
mapped page cache pages. But, it doesn't distinguish cow-ed file pages
from not cow-ed.
I would like to make the last unused bit in this file to report whether the
page mapped into respective pte is PageAnon or not.
[comment stolen from Pavel Emelyanov's v1 patch]
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 23:26:19 +00:00
|
|
|
struct page *page = NULL;
|
2008-02-05 06:29:04 +00:00
|
|
|
|
proc: report file/anon bit in /proc/pid/pagemap
This is an implementation of Andrew's proposal to extend the pagemap file
bits to report what is missing about tasks' working set.
The problem with the working set detection is multilateral. In the criu
(checkpoint/restore) project we dump the tasks' memory into image files
and to do it properly we need to detect which pages inside mappings are
really in use. The mincore syscall I though could help with this did not.
First, it doesn't report swapped pages, thus we cannot find out which
parts of anonymous mappings to dump. Next, it does report pages from page
cache as present even if they are not mapped, and it doesn't make that has
not been cow-ed.
Note, that issue with swap pages is critical -- we must dump swap pages to
image file. But the issues with file pages are optimization -- we can
take all file pages to image, this would be correct, but if we know that a
page is not mapped or not cow-ed, we can remove them from dump file. The
dump would still be self-consistent, though significantly smaller in size
(up to 10 times smaller on real apps).
Andrew noticed, that the proc pagemap file solved 2 of 3 above issues --
it reports whether a page is present or swapped and it doesn't report not
mapped page cache pages. But, it doesn't distinguish cow-ed file pages
from not cow-ed.
I would like to make the last unused bit in this file to report whether the
page mapped into respective pte is PageAnon or not.
[comment stolen from Pavel Emelyanov's v1 patch]
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 23:26:19 +00:00
|
|
|
if (pte_present(pte)) {
|
2015-09-08 22:00:07 +00:00
|
|
|
if (pm->show_pfn)
|
|
|
|
frame = pte_pfn(pte);
|
2015-09-08 22:00:02 +00:00
|
|
|
flags |= PM_PRESENT;
|
2019-06-13 20:50:49 +00:00
|
|
|
page = vm_normal_page(vma, addr, pte);
|
2013-10-16 20:46:53 +00:00
|
|
|
if (pte_soft_dirty(pte))
|
2015-09-08 22:00:02 +00:00
|
|
|
flags |= PM_SOFT_DIRTY;
|
proc: report file/anon bit in /proc/pid/pagemap
This is an implementation of Andrew's proposal to extend the pagemap file
bits to report what is missing about tasks' working set.
The problem with the working set detection is multilateral. In the criu
(checkpoint/restore) project we dump the tasks' memory into image files
and to do it properly we need to detect which pages inside mappings are
really in use. The mincore syscall I though could help with this did not.
First, it doesn't report swapped pages, thus we cannot find out which
parts of anonymous mappings to dump. Next, it does report pages from page
cache as present even if they are not mapped, and it doesn't make that has
not been cow-ed.
Note, that issue with swap pages is critical -- we must dump swap pages to
image file. But the issues with file pages are optimization -- we can
take all file pages to image, this would be correct, but if we know that a
page is not mapped or not cow-ed, we can remove them from dump file. The
dump would still be self-consistent, though significantly smaller in size
(up to 10 times smaller on real apps).
Andrew noticed, that the proc pagemap file solved 2 of 3 above issues --
it reports whether a page is present or swapped and it doesn't report not
mapped page cache pages. But, it doesn't distinguish cow-ed file pages
from not cow-ed.
I would like to make the last unused bit in this file to report whether the
page mapped into respective pte is PageAnon or not.
[comment stolen from Pavel Emelyanov's v1 patch]
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 23:26:19 +00:00
|
|
|
} else if (is_swap_pte(pte)) {
|
2013-08-13 23:00:49 +00:00
|
|
|
swp_entry_t entry;
|
|
|
|
if (pte_swp_soft_dirty(pte))
|
2015-09-08 22:00:02 +00:00
|
|
|
flags |= PM_SOFT_DIRTY;
|
2013-08-13 23:00:49 +00:00
|
|
|
entry = pte_to_swp_entry(pte);
|
2018-06-08 00:07:39 +00:00
|
|
|
if (pm->show_pfn)
|
|
|
|
frame = swp_type(entry) |
|
|
|
|
(swp_offset(entry) << MAX_SWAPFILES_SHIFT);
|
2015-09-08 22:00:02 +00:00
|
|
|
flags |= PM_SWAP;
|
proc: report file/anon bit in /proc/pid/pagemap
This is an implementation of Andrew's proposal to extend the pagemap file
bits to report what is missing about tasks' working set.
The problem with the working set detection is multilateral. In the criu
(checkpoint/restore) project we dump the tasks' memory into image files
and to do it properly we need to detect which pages inside mappings are
really in use. The mincore syscall I though could help with this did not.
First, it doesn't report swapped pages, thus we cannot find out which
parts of anonymous mappings to dump. Next, it does report pages from page
cache as present even if they are not mapped, and it doesn't make that has
not been cow-ed.
Note, that issue with swap pages is critical -- we must dump swap pages to
image file. But the issues with file pages are optimization -- we can
take all file pages to image, this would be correct, but if we know that a
page is not mapped or not cow-ed, we can remove them from dump file. The
dump would still be self-consistent, though significantly smaller in size
(up to 10 times smaller on real apps).
Andrew noticed, that the proc pagemap file solved 2 of 3 above issues --
it reports whether a page is present or swapped and it doesn't report not
mapped page cache pages. But, it doesn't distinguish cow-ed file pages
from not cow-ed.
I would like to make the last unused bit in this file to report whether the
page mapped into respective pte is PageAnon or not.
[comment stolen from Pavel Emelyanov's v1 patch]
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 23:26:19 +00:00
|
|
|
if (is_migration_entry(entry))
|
|
|
|
page = migration_entry_to_page(entry);
|
2017-09-08 23:11:43 +00:00
|
|
|
|
|
|
|
if (is_device_private_entry(entry))
|
|
|
|
page = device_private_entry_to_page(entry);
|
proc: report file/anon bit in /proc/pid/pagemap
This is an implementation of Andrew's proposal to extend the pagemap file
bits to report what is missing about tasks' working set.
The problem with the working set detection is multilateral. In the criu
(checkpoint/restore) project we dump the tasks' memory into image files
and to do it properly we need to detect which pages inside mappings are
really in use. The mincore syscall I though could help with this did not.
First, it doesn't report swapped pages, thus we cannot find out which
parts of anonymous mappings to dump. Next, it does report pages from page
cache as present even if they are not mapped, and it doesn't make that has
not been cow-ed.
Note, that issue with swap pages is critical -- we must dump swap pages to
image file. But the issues with file pages are optimization -- we can
take all file pages to image, this would be correct, but if we know that a
page is not mapped or not cow-ed, we can remove them from dump file. The
dump would still be self-consistent, though significantly smaller in size
(up to 10 times smaller on real apps).
Andrew noticed, that the proc pagemap file solved 2 of 3 above issues --
it reports whether a page is present or swapped and it doesn't report not
mapped page cache pages. But, it doesn't distinguish cow-ed file pages
from not cow-ed.
I would like to make the last unused bit in this file to report whether the
page mapped into respective pte is PageAnon or not.
[comment stolen from Pavel Emelyanov's v1 patch]
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 23:26:19 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
if (page && !PageAnon(page))
|
|
|
|
flags |= PM_FILE;
|
2015-09-08 22:00:10 +00:00
|
|
|
if (page && page_mapcount(page) == 1)
|
|
|
|
flags |= PM_MMAP_EXCLUSIVE;
|
2015-09-08 22:00:02 +00:00
|
|
|
if (vma->vm_flags & VM_SOFTDIRTY)
|
|
|
|
flags |= PM_SOFT_DIRTY;
|
proc: report file/anon bit in /proc/pid/pagemap
This is an implementation of Andrew's proposal to extend the pagemap file
bits to report what is missing about tasks' working set.
The problem with the working set detection is multilateral. In the criu
(checkpoint/restore) project we dump the tasks' memory into image files
and to do it properly we need to detect which pages inside mappings are
really in use. The mincore syscall I though could help with this did not.
First, it doesn't report swapped pages, thus we cannot find out which
parts of anonymous mappings to dump. Next, it does report pages from page
cache as present even if they are not mapped, and it doesn't make that has
not been cow-ed.
Note, that issue with swap pages is critical -- we must dump swap pages to
image file. But the issues with file pages are optimization -- we can
take all file pages to image, this would be correct, but if we know that a
page is not mapped or not cow-ed, we can remove them from dump file. The
dump would still be self-consistent, though significantly smaller in size
(up to 10 times smaller on real apps).
Andrew noticed, that the proc pagemap file solved 2 of 3 above issues --
it reports whether a page is present or swapped and it doesn't report not
mapped page cache pages. But, it doesn't distinguish cow-ed file pages
from not cow-ed.
I would like to make the last unused bit in this file to report whether the
page mapped into respective pte is PageAnon or not.
[comment stolen from Pavel Emelyanov's v1 patch]
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 23:26:19 +00:00
|
|
|
|
2015-09-08 22:00:02 +00:00
|
|
|
return make_pme(frame, flags);
|
2008-06-12 22:21:48 +00:00
|
|
|
}
|
|
|
|
|
2015-09-08 22:00:04 +00:00
|
|
|
static int pagemap_pmd_range(pmd_t *pmdp, unsigned long addr, unsigned long end,
|
2008-06-12 22:21:47 +00:00
|
|
|
struct mm_walk *walk)
|
2008-02-05 06:29:04 +00:00
|
|
|
{
|
2015-02-11 23:27:48 +00:00
|
|
|
struct vm_area_struct *vma = walk->vma;
|
2008-06-12 22:21:47 +00:00
|
|
|
struct pagemapread *pm = walk->private;
|
2013-11-14 22:30:54 +00:00
|
|
|
spinlock_t *ptl;
|
2015-02-11 23:27:31 +00:00
|
|
|
pte_t *pte, *orig_pte;
|
2008-02-05 06:29:04 +00:00
|
|
|
int err = 0;
|
|
|
|
|
2015-09-08 22:00:04 +00:00
|
|
|
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
|
2016-01-22 00:40:25 +00:00
|
|
|
ptl = pmd_trans_huge_lock(pmdp, vma);
|
|
|
|
if (ptl) {
|
2015-09-08 22:00:04 +00:00
|
|
|
u64 flags = 0, frame = 0;
|
|
|
|
pmd_t pmd = *pmdp;
|
mm: thp: check pmd migration entry in common path
When THP migration is being used, memory management code needs to handle
pmd migration entries properly. This patch uses !pmd_present() or
is_swap_pmd() (depending on whether pmd_none() needs separate code or
not) to check pmd migration entries at the places where a pmd entry is
present.
Since pmd-related code uses split_huge_page(), split_huge_pmd(),
pmd_trans_huge(), pmd_trans_unstable(), or
pmd_none_or_trans_huge_or_clear_bad(), this patch:
1. adds pmd migration entry split code in split_huge_pmd(),
2. takes care of pmd migration entries whenever pmd_trans_huge() is present,
3. makes pmd_none_or_trans_huge_or_clear_bad() pmd migration entry aware.
Since split_huge_page() uses split_huge_pmd() and pmd_trans_unstable()
is equivalent to pmd_none_or_trans_huge_or_clear_bad(), we do not change
them.
Until this commit, a pmd entry should be:
1. pointing to a pte page,
2. is_swap_pmd(),
3. pmd_trans_huge(),
4. pmd_devmap(), or
5. pmd_none().
Signed-off-by: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Nellans <dnellans@nvidia.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 23:11:01 +00:00
|
|
|
struct page *page = NULL;
|
mm: soft-dirty bits for user memory changes tracking
The soft-dirty is a bit on a PTE which helps to track which pages a task
writes to. In order to do this tracking one should
1. Clear soft-dirty bits from PTEs ("echo 4 > /proc/PID/clear_refs)
2. Wait some time.
3. Read soft-dirty bits (55'th in /proc/PID/pagemap2 entries)
To do this tracking, the writable bit is cleared from PTEs when the
soft-dirty bit is. Thus, after this, when the task tries to modify a
page at some virtual address the #PF occurs and the kernel sets the
soft-dirty bit on the respective PTE.
Note, that although all the task's address space is marked as r/o after
the soft-dirty bits clear, the #PF-s that occur after that are processed
fast. This is so, since the pages are still mapped to physical memory,
and thus all the kernel does is finds this fact out and puts back
writable, dirty and soft-dirty bits on the PTE.
Another thing to note, is that when mremap moves PTEs they are marked
with soft-dirty as well, since from the user perspective mremap modifies
the virtual memory at mremap's new address.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 22:01:20 +00:00
|
|
|
|
2017-11-02 22:59:34 +00:00
|
|
|
if (vma->vm_flags & VM_SOFTDIRTY)
|
2015-09-08 22:00:02 +00:00
|
|
|
flags |= PM_SOFT_DIRTY;
|
2013-09-11 21:22:24 +00:00
|
|
|
|
2015-09-08 22:00:04 +00:00
|
|
|
if (pmd_present(pmd)) {
|
mm: thp: check pmd migration entry in common path
When THP migration is being used, memory management code needs to handle
pmd migration entries properly. This patch uses !pmd_present() or
is_swap_pmd() (depending on whether pmd_none() needs separate code or
not) to check pmd migration entries at the places where a pmd entry is
present.
Since pmd-related code uses split_huge_page(), split_huge_pmd(),
pmd_trans_huge(), pmd_trans_unstable(), or
pmd_none_or_trans_huge_or_clear_bad(), this patch:
1. adds pmd migration entry split code in split_huge_pmd(),
2. takes care of pmd migration entries whenever pmd_trans_huge() is present,
3. makes pmd_none_or_trans_huge_or_clear_bad() pmd migration entry aware.
Since split_huge_page() uses split_huge_pmd() and pmd_trans_unstable()
is equivalent to pmd_none_or_trans_huge_or_clear_bad(), we do not change
them.
Until this commit, a pmd entry should be:
1. pointing to a pte page,
2. is_swap_pmd(),
3. pmd_trans_huge(),
4. pmd_devmap(), or
5. pmd_none().
Signed-off-by: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Nellans <dnellans@nvidia.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 23:11:01 +00:00
|
|
|
page = pmd_page(pmd);
|
2015-09-08 22:00:10 +00:00
|
|
|
|
2015-09-08 22:00:04 +00:00
|
|
|
flags |= PM_PRESENT;
|
2017-11-02 22:59:34 +00:00
|
|
|
if (pmd_soft_dirty(pmd))
|
|
|
|
flags |= PM_SOFT_DIRTY;
|
2015-09-08 22:00:07 +00:00
|
|
|
if (pm->show_pfn)
|
|
|
|
frame = pmd_pfn(pmd) +
|
|
|
|
((addr & ~PMD_MASK) >> PAGE_SHIFT);
|
2015-09-08 22:00:04 +00:00
|
|
|
}
|
mm: thp: check pmd migration entry in common path
When THP migration is being used, memory management code needs to handle
pmd migration entries properly. This patch uses !pmd_present() or
is_swap_pmd() (depending on whether pmd_none() needs separate code or
not) to check pmd migration entries at the places where a pmd entry is
present.
Since pmd-related code uses split_huge_page(), split_huge_pmd(),
pmd_trans_huge(), pmd_trans_unstable(), or
pmd_none_or_trans_huge_or_clear_bad(), this patch:
1. adds pmd migration entry split code in split_huge_pmd(),
2. takes care of pmd migration entries whenever pmd_trans_huge() is present,
3. makes pmd_none_or_trans_huge_or_clear_bad() pmd migration entry aware.
Since split_huge_page() uses split_huge_pmd() and pmd_trans_unstable()
is equivalent to pmd_none_or_trans_huge_or_clear_bad(), we do not change
them.
Until this commit, a pmd entry should be:
1. pointing to a pte page,
2. is_swap_pmd(),
3. pmd_trans_huge(),
4. pmd_devmap(), or
5. pmd_none().
Signed-off-by: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Nellans <dnellans@nvidia.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 23:11:01 +00:00
|
|
|
#ifdef CONFIG_ARCH_ENABLE_THP_MIGRATION
|
|
|
|
else if (is_swap_pmd(pmd)) {
|
|
|
|
swp_entry_t entry = pmd_to_swp_entry(pmd);
|
2018-06-08 00:07:39 +00:00
|
|
|
unsigned long offset;
|
mm: thp: check pmd migration entry in common path
When THP migration is being used, memory management code needs to handle
pmd migration entries properly. This patch uses !pmd_present() or
is_swap_pmd() (depending on whether pmd_none() needs separate code or
not) to check pmd migration entries at the places where a pmd entry is
present.
Since pmd-related code uses split_huge_page(), split_huge_pmd(),
pmd_trans_huge(), pmd_trans_unstable(), or
pmd_none_or_trans_huge_or_clear_bad(), this patch:
1. adds pmd migration entry split code in split_huge_pmd(),
2. takes care of pmd migration entries whenever pmd_trans_huge() is present,
3. makes pmd_none_or_trans_huge_or_clear_bad() pmd migration entry aware.
Since split_huge_page() uses split_huge_pmd() and pmd_trans_unstable()
is equivalent to pmd_none_or_trans_huge_or_clear_bad(), we do not change
them.
Until this commit, a pmd entry should be:
1. pointing to a pte page,
2. is_swap_pmd(),
3. pmd_trans_huge(),
4. pmd_devmap(), or
5. pmd_none().
Signed-off-by: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Nellans <dnellans@nvidia.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 23:11:01 +00:00
|
|
|
|
2018-06-08 00:07:39 +00:00
|
|
|
if (pm->show_pfn) {
|
|
|
|
offset = swp_offset(entry) +
|
|
|
|
((addr & ~PMD_MASK) >> PAGE_SHIFT);
|
|
|
|
frame = swp_type(entry) |
|
|
|
|
(offset << MAX_SWAPFILES_SHIFT);
|
|
|
|
}
|
mm: thp: check pmd migration entry in common path
When THP migration is being used, memory management code needs to handle
pmd migration entries properly. This patch uses !pmd_present() or
is_swap_pmd() (depending on whether pmd_none() needs separate code or
not) to check pmd migration entries at the places where a pmd entry is
present.
Since pmd-related code uses split_huge_page(), split_huge_pmd(),
pmd_trans_huge(), pmd_trans_unstable(), or
pmd_none_or_trans_huge_or_clear_bad(), this patch:
1. adds pmd migration entry split code in split_huge_pmd(),
2. takes care of pmd migration entries whenever pmd_trans_huge() is present,
3. makes pmd_none_or_trans_huge_or_clear_bad() pmd migration entry aware.
Since split_huge_page() uses split_huge_pmd() and pmd_trans_unstable()
is equivalent to pmd_none_or_trans_huge_or_clear_bad(), we do not change
them.
Until this commit, a pmd entry should be:
1. pointing to a pte page,
2. is_swap_pmd(),
3. pmd_trans_huge(),
4. pmd_devmap(), or
5. pmd_none().
Signed-off-by: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Nellans <dnellans@nvidia.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 23:11:01 +00:00
|
|
|
flags |= PM_SWAP;
|
2017-11-02 22:59:34 +00:00
|
|
|
if (pmd_swp_soft_dirty(pmd))
|
|
|
|
flags |= PM_SOFT_DIRTY;
|
mm: thp: check pmd migration entry in common path
When THP migration is being used, memory management code needs to handle
pmd migration entries properly. This patch uses !pmd_present() or
is_swap_pmd() (depending on whether pmd_none() needs separate code or
not) to check pmd migration entries at the places where a pmd entry is
present.
Since pmd-related code uses split_huge_page(), split_huge_pmd(),
pmd_trans_huge(), pmd_trans_unstable(), or
pmd_none_or_trans_huge_or_clear_bad(), this patch:
1. adds pmd migration entry split code in split_huge_pmd(),
2. takes care of pmd migration entries whenever pmd_trans_huge() is present,
3. makes pmd_none_or_trans_huge_or_clear_bad() pmd migration entry aware.
Since split_huge_page() uses split_huge_pmd() and pmd_trans_unstable()
is equivalent to pmd_none_or_trans_huge_or_clear_bad(), we do not change
them.
Until this commit, a pmd entry should be:
1. pointing to a pte page,
2. is_swap_pmd(),
3. pmd_trans_huge(),
4. pmd_devmap(), or
5. pmd_none().
Signed-off-by: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Nellans <dnellans@nvidia.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 23:11:01 +00:00
|
|
|
VM_BUG_ON(!is_pmd_migration_entry(pmd));
|
|
|
|
page = migration_entry_to_page(entry);
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
if (page && page_mapcount(page) == 1)
|
|
|
|
flags |= PM_MMAP_EXCLUSIVE;
|
2015-09-08 22:00:04 +00:00
|
|
|
|
2012-03-21 23:33:57 +00:00
|
|
|
for (; addr != end; addr += PAGE_SIZE) {
|
2015-09-08 22:00:04 +00:00
|
|
|
pagemap_entry_t pme = make_pme(frame, flags);
|
2012-03-21 23:33:57 +00:00
|
|
|
|
2012-03-21 23:33:59 +00:00
|
|
|
err = add_to_pagemap(addr, &pme, pm);
|
2012-03-21 23:33:57 +00:00
|
|
|
if (err)
|
|
|
|
break;
|
2018-06-08 00:07:39 +00:00
|
|
|
if (pm->show_pfn) {
|
|
|
|
if (flags & PM_PRESENT)
|
|
|
|
frame++;
|
|
|
|
else if (flags & PM_SWAP)
|
|
|
|
frame += (1 << MAX_SWAPFILES_SHIFT);
|
|
|
|
}
|
2012-03-21 23:33:57 +00:00
|
|
|
}
|
2013-11-14 22:30:54 +00:00
|
|
|
spin_unlock(ptl);
|
2012-03-21 23:33:57 +00:00
|
|
|
return err;
|
2012-03-21 23:33:57 +00:00
|
|
|
}
|
|
|
|
|
2015-09-08 22:00:04 +00:00
|
|
|
if (pmd_trans_unstable(pmdp))
|
2012-03-28 21:42:40 +00:00
|
|
|
return 0;
|
2015-09-08 22:00:04 +00:00
|
|
|
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
|
mm: softdirty: unmapped addresses between VMAs are clean
If a /proc/pid/pagemap read spans a [VMA, an unmapped region, then a
VM_SOFTDIRTY VMA], the virtual pages in the unmapped region are reported
as softdirty. Here's a program to demonstrate the bug:
int main() {
const uint64_t PAGEMAP_SOFTDIRTY = 1ul << 55;
uint64_t pme[3];
int fd = open("/proc/self/pagemap", O_RDONLY);;
char *m = mmap(NULL, 3 * getpagesize(), PROT_READ,
MAP_ANONYMOUS | MAP_SHARED, -1, 0);
munmap(m + getpagesize(), getpagesize());
pread(fd, pme, 24, (unsigned long) m / getpagesize() * 8);
assert(pme[0] & PAGEMAP_SOFTDIRTY); /* passes */
assert(!(pme[1] & PAGEMAP_SOFTDIRTY)); /* fails */
assert(pme[2] & PAGEMAP_SOFTDIRTY); /* passes */
return 0;
}
(Note that all pages in new VMAs are softdirty until cleared).
Tested:
Used the program given above. I'm going to include this code in
a selftest in the future.
[n-horiguchi@ah.jp.nec.com: prevent pagemap_pte_range() from overrunning]
Signed-off-by: Peter Feiner <pfeiner@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Jamie Liu <jamieliu@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:28:32 +00:00
|
|
|
|
2015-02-11 23:27:48 +00:00
|
|
|
/*
|
|
|
|
* We can assume that @vma always points to a valid one and @end never
|
|
|
|
* goes beyond vma->vm_end.
|
|
|
|
*/
|
2015-09-08 22:00:04 +00:00
|
|
|
orig_pte = pte = pte_offset_map_lock(walk->mm, pmdp, addr, &ptl);
|
2015-02-11 23:27:48 +00:00
|
|
|
for (; addr < end; pte++, addr += PAGE_SIZE) {
|
|
|
|
pagemap_entry_t pme;
|
2015-02-11 23:27:31 +00:00
|
|
|
|
2015-09-08 22:00:02 +00:00
|
|
|
pme = pte_to_pagemap_entry(pm, vma, addr, *pte);
|
2015-02-11 23:27:48 +00:00
|
|
|
err = add_to_pagemap(addr, &pme, pm);
|
2015-02-11 23:27:31 +00:00
|
|
|
if (err)
|
mm: softdirty: unmapped addresses between VMAs are clean
If a /proc/pid/pagemap read spans a [VMA, an unmapped region, then a
VM_SOFTDIRTY VMA], the virtual pages in the unmapped region are reported
as softdirty. Here's a program to demonstrate the bug:
int main() {
const uint64_t PAGEMAP_SOFTDIRTY = 1ul << 55;
uint64_t pme[3];
int fd = open("/proc/self/pagemap", O_RDONLY);;
char *m = mmap(NULL, 3 * getpagesize(), PROT_READ,
MAP_ANONYMOUS | MAP_SHARED, -1, 0);
munmap(m + getpagesize(), getpagesize());
pread(fd, pme, 24, (unsigned long) m / getpagesize() * 8);
assert(pme[0] & PAGEMAP_SOFTDIRTY); /* passes */
assert(!(pme[1] & PAGEMAP_SOFTDIRTY)); /* fails */
assert(pme[2] & PAGEMAP_SOFTDIRTY); /* passes */
return 0;
}
(Note that all pages in new VMAs are softdirty until cleared).
Tested:
Used the program given above. I'm going to include this code in
a selftest in the future.
[n-horiguchi@ah.jp.nec.com: prevent pagemap_pte_range() from overrunning]
Signed-off-by: Peter Feiner <pfeiner@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Jamie Liu <jamieliu@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:28:32 +00:00
|
|
|
break;
|
2008-02-05 06:29:04 +00:00
|
|
|
}
|
2015-02-11 23:27:48 +00:00
|
|
|
pte_unmap_unlock(orig_pte, ptl);
|
2008-02-05 06:29:04 +00:00
|
|
|
|
|
|
|
cond_resched();
|
|
|
|
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
2010-05-24 21:32:12 +00:00
|
|
|
#ifdef CONFIG_HUGETLB_PAGE
|
2010-04-06 21:35:04 +00:00
|
|
|
/* This function walks within one hugetlb entry in the single call */
|
2015-09-08 22:00:04 +00:00
|
|
|
static int pagemap_hugetlb_range(pte_t *ptep, unsigned long hmask,
|
2010-04-06 21:35:04 +00:00
|
|
|
unsigned long addr, unsigned long end,
|
|
|
|
struct mm_walk *walk)
|
mm hugetlb: add hugepage support to pagemap
This patch enables extraction of the pfn of a hugepage from
/proc/pid/pagemap in an architecture independent manner.
Details
-------
My test program (leak_pagemap) works as follows:
- creat() and mmap() a file on hugetlbfs (file size is 200MB == 100 hugepages,)
- read()/write() something on it,
- call page-types with option -p,
- munmap() and unlink() the file on hugetlbfs
Without my patches
------------------
$ ./leak_pagemap
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000000000000 1 0 __________________________________
0x0000000000000804 1 0 __R________M______________________ referenced,mmap
0x000000000000086c 81 0 __RU_lA____M______________________ referenced,uptodate,lru,active,mmap
0x0000000000005808 5 0 ___U_______Ma_b___________________ uptodate,mmap,anonymous,swapbacked
0x0000000000005868 12 0 ___U_lA____Ma_b___________________ uptodate,lru,active,mmap,anonymous,swapbacked
0x000000000000586c 1 0 __RU_lA____Ma_b___________________ referenced,uptodate,lru,active,mmap,anonymous,swapbacked
total 101 0
The output of page-types don't show any hugepage.
With my patches
---------------
$ ./leak_pagemap
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000000000000 1 0 __________________________________
0x0000000000030000 51100 199 ________________TG________________ compound_tail,huge
0x0000000000028018 100 0 ___UD__________H_G________________ uptodate,dirty,compound_head,huge
0x0000000000000804 1 0 __R________M______________________ referenced,mmap
0x000000000000080c 1 0 __RU_______M______________________ referenced,uptodate,mmap
0x000000000000086c 80 0 __RU_lA____M______________________ referenced,uptodate,lru,active,mmap
0x0000000000005808 4 0 ___U_______Ma_b___________________ uptodate,mmap,anonymous,swapbacked
0x0000000000005868 12 0 ___U_lA____Ma_b___________________ uptodate,lru,active,mmap,anonymous,swapbacked
0x000000000000586c 1 0 __RU_lA____Ma_b___________________ referenced,uptodate,lru,active,mmap,anonymous,swapbacked
total 51300 200
The output of page-types shows 51200 pages contributing to hugepages,
containing 100 head pages and 51100 tail pages as expected.
[akpm@linux-foundation.org: build fix]
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 02:00:01 +00:00
|
|
|
{
|
|
|
|
struct pagemapread *pm = walk->private;
|
2015-02-11 23:27:48 +00:00
|
|
|
struct vm_area_struct *vma = walk->vma;
|
2015-09-08 22:00:04 +00:00
|
|
|
u64 flags = 0, frame = 0;
|
mm hugetlb: add hugepage support to pagemap
This patch enables extraction of the pfn of a hugepage from
/proc/pid/pagemap in an architecture independent manner.
Details
-------
My test program (leak_pagemap) works as follows:
- creat() and mmap() a file on hugetlbfs (file size is 200MB == 100 hugepages,)
- read()/write() something on it,
- call page-types with option -p,
- munmap() and unlink() the file on hugetlbfs
Without my patches
------------------
$ ./leak_pagemap
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000000000000 1 0 __________________________________
0x0000000000000804 1 0 __R________M______________________ referenced,mmap
0x000000000000086c 81 0 __RU_lA____M______________________ referenced,uptodate,lru,active,mmap
0x0000000000005808 5 0 ___U_______Ma_b___________________ uptodate,mmap,anonymous,swapbacked
0x0000000000005868 12 0 ___U_lA____Ma_b___________________ uptodate,lru,active,mmap,anonymous,swapbacked
0x000000000000586c 1 0 __RU_lA____Ma_b___________________ referenced,uptodate,lru,active,mmap,anonymous,swapbacked
total 101 0
The output of page-types don't show any hugepage.
With my patches
---------------
$ ./leak_pagemap
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000000000000 1 0 __________________________________
0x0000000000030000 51100 199 ________________TG________________ compound_tail,huge
0x0000000000028018 100 0 ___UD__________H_G________________ uptodate,dirty,compound_head,huge
0x0000000000000804 1 0 __R________M______________________ referenced,mmap
0x000000000000080c 1 0 __RU_______M______________________ referenced,uptodate,mmap
0x000000000000086c 80 0 __RU_lA____M______________________ referenced,uptodate,lru,active,mmap
0x0000000000005808 4 0 ___U_______Ma_b___________________ uptodate,mmap,anonymous,swapbacked
0x0000000000005868 12 0 ___U_lA____Ma_b___________________ uptodate,lru,active,mmap,anonymous,swapbacked
0x000000000000586c 1 0 __RU_lA____Ma_b___________________ referenced,uptodate,lru,active,mmap,anonymous,swapbacked
total 51300 200
The output of page-types shows 51200 pages contributing to hugepages,
containing 100 head pages and 51100 tail pages as expected.
[akpm@linux-foundation.org: build fix]
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 02:00:01 +00:00
|
|
|
int err = 0;
|
2015-09-08 22:00:04 +00:00
|
|
|
pte_t pte;
|
mm hugetlb: add hugepage support to pagemap
This patch enables extraction of the pfn of a hugepage from
/proc/pid/pagemap in an architecture independent manner.
Details
-------
My test program (leak_pagemap) works as follows:
- creat() and mmap() a file on hugetlbfs (file size is 200MB == 100 hugepages,)
- read()/write() something on it,
- call page-types with option -p,
- munmap() and unlink() the file on hugetlbfs
Without my patches
------------------
$ ./leak_pagemap
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000000000000 1 0 __________________________________
0x0000000000000804 1 0 __R________M______________________ referenced,mmap
0x000000000000086c 81 0 __RU_lA____M______________________ referenced,uptodate,lru,active,mmap
0x0000000000005808 5 0 ___U_______Ma_b___________________ uptodate,mmap,anonymous,swapbacked
0x0000000000005868 12 0 ___U_lA____Ma_b___________________ uptodate,lru,active,mmap,anonymous,swapbacked
0x000000000000586c 1 0 __RU_lA____Ma_b___________________ referenced,uptodate,lru,active,mmap,anonymous,swapbacked
total 101 0
The output of page-types don't show any hugepage.
With my patches
---------------
$ ./leak_pagemap
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000000000000 1 0 __________________________________
0x0000000000030000 51100 199 ________________TG________________ compound_tail,huge
0x0000000000028018 100 0 ___UD__________H_G________________ uptodate,dirty,compound_head,huge
0x0000000000000804 1 0 __R________M______________________ referenced,mmap
0x000000000000080c 1 0 __RU_______M______________________ referenced,uptodate,mmap
0x000000000000086c 80 0 __RU_lA____M______________________ referenced,uptodate,lru,active,mmap
0x0000000000005808 4 0 ___U_______Ma_b___________________ uptodate,mmap,anonymous,swapbacked
0x0000000000005868 12 0 ___U_lA____Ma_b___________________ uptodate,lru,active,mmap,anonymous,swapbacked
0x000000000000586c 1 0 __RU_lA____Ma_b___________________ referenced,uptodate,lru,active,mmap,anonymous,swapbacked
total 51300 200
The output of page-types shows 51200 pages contributing to hugepages,
containing 100 head pages and 51100 tail pages as expected.
[akpm@linux-foundation.org: build fix]
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 02:00:01 +00:00
|
|
|
|
2015-02-11 23:27:48 +00:00
|
|
|
if (vma->vm_flags & VM_SOFTDIRTY)
|
2015-09-08 22:00:02 +00:00
|
|
|
flags |= PM_SOFT_DIRTY;
|
2013-09-11 21:22:24 +00:00
|
|
|
|
2015-09-08 22:00:04 +00:00
|
|
|
pte = huge_ptep_get(ptep);
|
|
|
|
if (pte_present(pte)) {
|
|
|
|
struct page *page = pte_page(pte);
|
|
|
|
|
|
|
|
if (!PageAnon(page))
|
|
|
|
flags |= PM_FILE;
|
|
|
|
|
2015-09-08 22:00:10 +00:00
|
|
|
if (page_mapcount(page) == 1)
|
|
|
|
flags |= PM_MMAP_EXCLUSIVE;
|
|
|
|
|
2015-09-08 22:00:04 +00:00
|
|
|
flags |= PM_PRESENT;
|
2015-09-08 22:00:07 +00:00
|
|
|
if (pm->show_pfn)
|
|
|
|
frame = pte_pfn(pte) +
|
|
|
|
((addr & ~hmask) >> PAGE_SHIFT);
|
2015-09-08 22:00:04 +00:00
|
|
|
}
|
|
|
|
|
mm hugetlb: add hugepage support to pagemap
This patch enables extraction of the pfn of a hugepage from
/proc/pid/pagemap in an architecture independent manner.
Details
-------
My test program (leak_pagemap) works as follows:
- creat() and mmap() a file on hugetlbfs (file size is 200MB == 100 hugepages,)
- read()/write() something on it,
- call page-types with option -p,
- munmap() and unlink() the file on hugetlbfs
Without my patches
------------------
$ ./leak_pagemap
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000000000000 1 0 __________________________________
0x0000000000000804 1 0 __R________M______________________ referenced,mmap
0x000000000000086c 81 0 __RU_lA____M______________________ referenced,uptodate,lru,active,mmap
0x0000000000005808 5 0 ___U_______Ma_b___________________ uptodate,mmap,anonymous,swapbacked
0x0000000000005868 12 0 ___U_lA____Ma_b___________________ uptodate,lru,active,mmap,anonymous,swapbacked
0x000000000000586c 1 0 __RU_lA____Ma_b___________________ referenced,uptodate,lru,active,mmap,anonymous,swapbacked
total 101 0
The output of page-types don't show any hugepage.
With my patches
---------------
$ ./leak_pagemap
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000000000000 1 0 __________________________________
0x0000000000030000 51100 199 ________________TG________________ compound_tail,huge
0x0000000000028018 100 0 ___UD__________H_G________________ uptodate,dirty,compound_head,huge
0x0000000000000804 1 0 __R________M______________________ referenced,mmap
0x000000000000080c 1 0 __RU_______M______________________ referenced,uptodate,mmap
0x000000000000086c 80 0 __RU_lA____M______________________ referenced,uptodate,lru,active,mmap
0x0000000000005808 4 0 ___U_______Ma_b___________________ uptodate,mmap,anonymous,swapbacked
0x0000000000005868 12 0 ___U_lA____Ma_b___________________ uptodate,lru,active,mmap,anonymous,swapbacked
0x000000000000586c 1 0 __RU_lA____Ma_b___________________ referenced,uptodate,lru,active,mmap,anonymous,swapbacked
total 51300 200
The output of page-types shows 51200 pages contributing to hugepages,
containing 100 head pages and 51100 tail pages as expected.
[akpm@linux-foundation.org: build fix]
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 02:00:01 +00:00
|
|
|
for (; addr != end; addr += PAGE_SIZE) {
|
2015-09-08 22:00:04 +00:00
|
|
|
pagemap_entry_t pme = make_pme(frame, flags);
|
|
|
|
|
2012-03-21 23:33:59 +00:00
|
|
|
err = add_to_pagemap(addr, &pme, pm);
|
mm hugetlb: add hugepage support to pagemap
This patch enables extraction of the pfn of a hugepage from
/proc/pid/pagemap in an architecture independent manner.
Details
-------
My test program (leak_pagemap) works as follows:
- creat() and mmap() a file on hugetlbfs (file size is 200MB == 100 hugepages,)
- read()/write() something on it,
- call page-types with option -p,
- munmap() and unlink() the file on hugetlbfs
Without my patches
------------------
$ ./leak_pagemap
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000000000000 1 0 __________________________________
0x0000000000000804 1 0 __R________M______________________ referenced,mmap
0x000000000000086c 81 0 __RU_lA____M______________________ referenced,uptodate,lru,active,mmap
0x0000000000005808 5 0 ___U_______Ma_b___________________ uptodate,mmap,anonymous,swapbacked
0x0000000000005868 12 0 ___U_lA____Ma_b___________________ uptodate,lru,active,mmap,anonymous,swapbacked
0x000000000000586c 1 0 __RU_lA____Ma_b___________________ referenced,uptodate,lru,active,mmap,anonymous,swapbacked
total 101 0
The output of page-types don't show any hugepage.
With my patches
---------------
$ ./leak_pagemap
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000000000000 1 0 __________________________________
0x0000000000030000 51100 199 ________________TG________________ compound_tail,huge
0x0000000000028018 100 0 ___UD__________H_G________________ uptodate,dirty,compound_head,huge
0x0000000000000804 1 0 __R________M______________________ referenced,mmap
0x000000000000080c 1 0 __RU_______M______________________ referenced,uptodate,mmap
0x000000000000086c 80 0 __RU_lA____M______________________ referenced,uptodate,lru,active,mmap
0x0000000000005808 4 0 ___U_______Ma_b___________________ uptodate,mmap,anonymous,swapbacked
0x0000000000005868 12 0 ___U_lA____Ma_b___________________ uptodate,lru,active,mmap,anonymous,swapbacked
0x000000000000586c 1 0 __RU_lA____Ma_b___________________ referenced,uptodate,lru,active,mmap,anonymous,swapbacked
total 51300 200
The output of page-types shows 51200 pages contributing to hugepages,
containing 100 head pages and 51100 tail pages as expected.
[akpm@linux-foundation.org: build fix]
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 02:00:01 +00:00
|
|
|
if (err)
|
|
|
|
return err;
|
2015-09-08 22:00:07 +00:00
|
|
|
if (pm->show_pfn && (flags & PM_PRESENT))
|
2015-09-08 22:00:04 +00:00
|
|
|
frame++;
|
mm hugetlb: add hugepage support to pagemap
This patch enables extraction of the pfn of a hugepage from
/proc/pid/pagemap in an architecture independent manner.
Details
-------
My test program (leak_pagemap) works as follows:
- creat() and mmap() a file on hugetlbfs (file size is 200MB == 100 hugepages,)
- read()/write() something on it,
- call page-types with option -p,
- munmap() and unlink() the file on hugetlbfs
Without my patches
------------------
$ ./leak_pagemap
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000000000000 1 0 __________________________________
0x0000000000000804 1 0 __R________M______________________ referenced,mmap
0x000000000000086c 81 0 __RU_lA____M______________________ referenced,uptodate,lru,active,mmap
0x0000000000005808 5 0 ___U_______Ma_b___________________ uptodate,mmap,anonymous,swapbacked
0x0000000000005868 12 0 ___U_lA____Ma_b___________________ uptodate,lru,active,mmap,anonymous,swapbacked
0x000000000000586c 1 0 __RU_lA____Ma_b___________________ referenced,uptodate,lru,active,mmap,anonymous,swapbacked
total 101 0
The output of page-types don't show any hugepage.
With my patches
---------------
$ ./leak_pagemap
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000000000000 1 0 __________________________________
0x0000000000030000 51100 199 ________________TG________________ compound_tail,huge
0x0000000000028018 100 0 ___UD__________H_G________________ uptodate,dirty,compound_head,huge
0x0000000000000804 1 0 __R________M______________________ referenced,mmap
0x000000000000080c 1 0 __RU_______M______________________ referenced,uptodate,mmap
0x000000000000086c 80 0 __RU_lA____M______________________ referenced,uptodate,lru,active,mmap
0x0000000000005808 4 0 ___U_______Ma_b___________________ uptodate,mmap,anonymous,swapbacked
0x0000000000005868 12 0 ___U_lA____Ma_b___________________ uptodate,lru,active,mmap,anonymous,swapbacked
0x000000000000586c 1 0 __RU_lA____Ma_b___________________ referenced,uptodate,lru,active,mmap,anonymous,swapbacked
total 51300 200
The output of page-types shows 51200 pages contributing to hugepages,
containing 100 head pages and 51100 tail pages as expected.
[akpm@linux-foundation.org: build fix]
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 02:00:01 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
cond_resched();
|
|
|
|
|
|
|
|
return err;
|
|
|
|
}
|
2019-08-28 14:19:54 +00:00
|
|
|
#else
|
|
|
|
#define pagemap_hugetlb_range NULL
|
2010-05-24 21:32:12 +00:00
|
|
|
#endif /* HUGETLB_PAGE */
|
mm hugetlb: add hugepage support to pagemap
This patch enables extraction of the pfn of a hugepage from
/proc/pid/pagemap in an architecture independent manner.
Details
-------
My test program (leak_pagemap) works as follows:
- creat() and mmap() a file on hugetlbfs (file size is 200MB == 100 hugepages,)
- read()/write() something on it,
- call page-types with option -p,
- munmap() and unlink() the file on hugetlbfs
Without my patches
------------------
$ ./leak_pagemap
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000000000000 1 0 __________________________________
0x0000000000000804 1 0 __R________M______________________ referenced,mmap
0x000000000000086c 81 0 __RU_lA____M______________________ referenced,uptodate,lru,active,mmap
0x0000000000005808 5 0 ___U_______Ma_b___________________ uptodate,mmap,anonymous,swapbacked
0x0000000000005868 12 0 ___U_lA____Ma_b___________________ uptodate,lru,active,mmap,anonymous,swapbacked
0x000000000000586c 1 0 __RU_lA____Ma_b___________________ referenced,uptodate,lru,active,mmap,anonymous,swapbacked
total 101 0
The output of page-types don't show any hugepage.
With my patches
---------------
$ ./leak_pagemap
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000000000000 1 0 __________________________________
0x0000000000030000 51100 199 ________________TG________________ compound_tail,huge
0x0000000000028018 100 0 ___UD__________H_G________________ uptodate,dirty,compound_head,huge
0x0000000000000804 1 0 __R________M______________________ referenced,mmap
0x000000000000080c 1 0 __RU_______M______________________ referenced,uptodate,mmap
0x000000000000086c 80 0 __RU_lA____M______________________ referenced,uptodate,lru,active,mmap
0x0000000000005808 4 0 ___U_______Ma_b___________________ uptodate,mmap,anonymous,swapbacked
0x0000000000005868 12 0 ___U_lA____Ma_b___________________ uptodate,lru,active,mmap,anonymous,swapbacked
0x000000000000586c 1 0 __RU_lA____Ma_b___________________ referenced,uptodate,lru,active,mmap,anonymous,swapbacked
total 51300 200
The output of page-types shows 51200 pages contributing to hugepages,
containing 100 head pages and 51100 tail pages as expected.
[akpm@linux-foundation.org: build fix]
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 02:00:01 +00:00
|
|
|
|
2019-08-28 14:19:54 +00:00
|
|
|
static const struct mm_walk_ops pagemap_ops = {
|
|
|
|
.pmd_entry = pagemap_pmd_range,
|
|
|
|
.pte_hole = pagemap_pte_hole,
|
|
|
|
.hugetlb_entry = pagemap_hugetlb_range,
|
|
|
|
};
|
|
|
|
|
2008-02-05 06:29:04 +00:00
|
|
|
/*
|
|
|
|
* /proc/pid/pagemap - an array mapping virtual pages to pfns
|
|
|
|
*
|
2008-03-21 23:46:59 +00:00
|
|
|
* For each page in the address space, this file contains one 64-bit entry
|
|
|
|
* consisting of the following:
|
|
|
|
*
|
proc: report file/anon bit in /proc/pid/pagemap
This is an implementation of Andrew's proposal to extend the pagemap file
bits to report what is missing about tasks' working set.
The problem with the working set detection is multilateral. In the criu
(checkpoint/restore) project we dump the tasks' memory into image files
and to do it properly we need to detect which pages inside mappings are
really in use. The mincore syscall I though could help with this did not.
First, it doesn't report swapped pages, thus we cannot find out which
parts of anonymous mappings to dump. Next, it does report pages from page
cache as present even if they are not mapped, and it doesn't make that has
not been cow-ed.
Note, that issue with swap pages is critical -- we must dump swap pages to
image file. But the issues with file pages are optimization -- we can
take all file pages to image, this would be correct, but if we know that a
page is not mapped or not cow-ed, we can remove them from dump file. The
dump would still be self-consistent, though significantly smaller in size
(up to 10 times smaller on real apps).
Andrew noticed, that the proc pagemap file solved 2 of 3 above issues --
it reports whether a page is present or swapped and it doesn't report not
mapped page cache pages. But, it doesn't distinguish cow-ed file pages
from not cow-ed.
I would like to make the last unused bit in this file to report whether the
page mapped into respective pte is PageAnon or not.
[comment stolen from Pavel Emelyanov's v1 patch]
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 23:26:19 +00:00
|
|
|
* Bits 0-54 page frame number (PFN) if present
|
2008-03-21 23:46:59 +00:00
|
|
|
* Bits 0-4 swap type if swapped
|
proc: report file/anon bit in /proc/pid/pagemap
This is an implementation of Andrew's proposal to extend the pagemap file
bits to report what is missing about tasks' working set.
The problem with the working set detection is multilateral. In the criu
(checkpoint/restore) project we dump the tasks' memory into image files
and to do it properly we need to detect which pages inside mappings are
really in use. The mincore syscall I though could help with this did not.
First, it doesn't report swapped pages, thus we cannot find out which
parts of anonymous mappings to dump. Next, it does report pages from page
cache as present even if they are not mapped, and it doesn't make that has
not been cow-ed.
Note, that issue with swap pages is critical -- we must dump swap pages to
image file. But the issues with file pages are optimization -- we can
take all file pages to image, this would be correct, but if we know that a
page is not mapped or not cow-ed, we can remove them from dump file. The
dump would still be self-consistent, though significantly smaller in size
(up to 10 times smaller on real apps).
Andrew noticed, that the proc pagemap file solved 2 of 3 above issues --
it reports whether a page is present or swapped and it doesn't report not
mapped page cache pages. But, it doesn't distinguish cow-ed file pages
from not cow-ed.
I would like to make the last unused bit in this file to report whether the
page mapped into respective pte is PageAnon or not.
[comment stolen from Pavel Emelyanov's v1 patch]
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 23:26:19 +00:00
|
|
|
* Bits 5-54 swap offset if swapped
|
2018-04-18 08:07:49 +00:00
|
|
|
* Bit 55 pte is soft-dirty (see Documentation/admin-guide/mm/soft-dirty.rst)
|
2015-09-08 22:00:10 +00:00
|
|
|
* Bit 56 page exclusively mapped
|
|
|
|
* Bits 57-60 zero
|
proc: report file/anon bit in /proc/pid/pagemap
This is an implementation of Andrew's proposal to extend the pagemap file
bits to report what is missing about tasks' working set.
The problem with the working set detection is multilateral. In the criu
(checkpoint/restore) project we dump the tasks' memory into image files
and to do it properly we need to detect which pages inside mappings are
really in use. The mincore syscall I though could help with this did not.
First, it doesn't report swapped pages, thus we cannot find out which
parts of anonymous mappings to dump. Next, it does report pages from page
cache as present even if they are not mapped, and it doesn't make that has
not been cow-ed.
Note, that issue with swap pages is critical -- we must dump swap pages to
image file. But the issues with file pages are optimization -- we can
take all file pages to image, this would be correct, but if we know that a
page is not mapped or not cow-ed, we can remove them from dump file. The
dump would still be self-consistent, though significantly smaller in size
(up to 10 times smaller on real apps).
Andrew noticed, that the proc pagemap file solved 2 of 3 above issues --
it reports whether a page is present or swapped and it doesn't report not
mapped page cache pages. But, it doesn't distinguish cow-ed file pages
from not cow-ed.
I would like to make the last unused bit in this file to report whether the
page mapped into respective pte is PageAnon or not.
[comment stolen from Pavel Emelyanov's v1 patch]
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 23:26:19 +00:00
|
|
|
* Bit 61 page is file-page or shared-anon
|
2008-03-21 23:46:59 +00:00
|
|
|
* Bit 62 page swapped
|
|
|
|
* Bit 63 page present
|
|
|
|
*
|
|
|
|
* If the page is not present but in swap, then the PFN contains an
|
|
|
|
* encoding of the swap file number and the page's offset into the
|
|
|
|
* swap. Unmapped pages return a null PFN. This allows determining
|
2008-02-05 06:29:04 +00:00
|
|
|
* precisely which pages are mapped (or in swap) and comparing mapped
|
|
|
|
* pages between processes.
|
|
|
|
*
|
|
|
|
* Efficient users of this interface will use /proc/pid/maps to
|
|
|
|
* determine which areas of memory are actually mapped and llseek to
|
|
|
|
* skip over unmapped regions.
|
|
|
|
*/
|
|
|
|
static ssize_t pagemap_read(struct file *file, char __user *buf,
|
|
|
|
size_t count, loff_t *ppos)
|
|
|
|
{
|
2015-09-08 21:59:59 +00:00
|
|
|
struct mm_struct *mm = file->private_data;
|
2008-02-05 06:29:04 +00:00
|
|
|
struct pagemapread pm;
|
2008-07-05 08:02:01 +00:00
|
|
|
unsigned long src;
|
|
|
|
unsigned long svpfn;
|
|
|
|
unsigned long start_vaddr;
|
|
|
|
unsigned long end_vaddr;
|
2015-09-08 21:59:59 +00:00
|
|
|
int ret = 0, copied = 0;
|
2008-02-05 06:29:04 +00:00
|
|
|
|
2017-02-27 22:30:13 +00:00
|
|
|
if (!mm || !mmget_not_zero(mm))
|
2008-02-05 06:29:04 +00:00
|
|
|
goto out;
|
|
|
|
|
|
|
|
ret = -EINVAL;
|
|
|
|
/* file position must be aligned */
|
2008-06-06 05:46:31 +00:00
|
|
|
if ((*ppos % PM_ENTRY_BYTES) || (count % PM_ENTRY_BYTES))
|
2015-09-08 21:59:59 +00:00
|
|
|
goto out_mm;
|
2008-02-05 06:29:04 +00:00
|
|
|
|
|
|
|
ret = 0;
|
2009-04-30 22:08:18 +00:00
|
|
|
if (!count)
|
2015-09-08 21:59:59 +00:00
|
|
|
goto out_mm;
|
2009-04-30 22:08:18 +00:00
|
|
|
|
2015-09-08 22:00:07 +00:00
|
|
|
/* do not disclose physical addresses: attack vector */
|
|
|
|
pm.show_pfn = file_ns_capable(file, &init_user_ns, CAP_SYS_ADMIN);
|
|
|
|
|
2013-08-13 23:01:03 +00:00
|
|
|
pm.len = (PAGEMAP_WALK_SIZE >> PAGE_SHIFT);
|
treewide: kmalloc() -> kmalloc_array()
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This
patch replaces cases of:
kmalloc(a * b, gfp)
with:
kmalloc_array(a * b, gfp)
as well as handling cases of:
kmalloc(a * b * c, gfp)
with:
kmalloc(array3_size(a, b, c), gfp)
as it's slightly less ugly than:
kmalloc_array(array_size(a, b), c, gfp)
This does, however, attempt to ignore constant size factors like:
kmalloc(4 * 1024, gfp)
though any constants defined via macros get caught up in the conversion.
Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.
The tools/ directory was manually excluded, since it has its own
implementation of kmalloc().
The Coccinelle script used for this was:
// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@
(
kmalloc(
- (sizeof(TYPE)) * E
+ sizeof(TYPE) * E
, ...)
|
kmalloc(
- (sizeof(THING)) * E
+ sizeof(THING) * E
, ...)
)
// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@
(
kmalloc(
- sizeof(u8) * (COUNT)
+ COUNT
, ...)
|
kmalloc(
- sizeof(__u8) * (COUNT)
+ COUNT
, ...)
|
kmalloc(
- sizeof(char) * (COUNT)
+ COUNT
, ...)
|
kmalloc(
- sizeof(unsigned char) * (COUNT)
+ COUNT
, ...)
|
kmalloc(
- sizeof(u8) * COUNT
+ COUNT
, ...)
|
kmalloc(
- sizeof(__u8) * COUNT
+ COUNT
, ...)
|
kmalloc(
- sizeof(char) * COUNT
+ COUNT
, ...)
|
kmalloc(
- sizeof(unsigned char) * COUNT
+ COUNT
, ...)
)
// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@
(
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * (COUNT_ID)
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * COUNT_ID
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * (COUNT_CONST)
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * COUNT_CONST
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * (COUNT_ID)
+ COUNT_ID, sizeof(THING)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * COUNT_ID
+ COUNT_ID, sizeof(THING)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * (COUNT_CONST)
+ COUNT_CONST, sizeof(THING)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * COUNT_CONST
+ COUNT_CONST, sizeof(THING)
, ...)
)
// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@
- kmalloc
+ kmalloc_array
(
- SIZE * COUNT
+ COUNT, SIZE
, ...)
// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@
(
kmalloc(
- sizeof(TYPE) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kmalloc(
- sizeof(TYPE) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kmalloc(
- sizeof(TYPE) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kmalloc(
- sizeof(TYPE) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kmalloc(
- sizeof(THING) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kmalloc(
- sizeof(THING) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kmalloc(
- sizeof(THING) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kmalloc(
- sizeof(THING) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
)
// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@
(
kmalloc(
- sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
kmalloc(
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
kmalloc(
- sizeof(THING1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
kmalloc(
- sizeof(THING1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
kmalloc(
- sizeof(TYPE1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
|
kmalloc(
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
)
// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@
(
kmalloc(
- (COUNT) * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- COUNT * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- COUNT * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- (COUNT) * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- COUNT * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- (COUNT) * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- (COUNT) * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- COUNT * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
)
// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@
(
kmalloc(C1 * C2 * C3, ...)
|
kmalloc(
- (E1) * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
|
kmalloc(
- (E1) * (E2) * E3
+ array3_size(E1, E2, E3)
, ...)
|
kmalloc(
- (E1) * (E2) * (E3)
+ array3_size(E1, E2, E3)
, ...)
|
kmalloc(
- E1 * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
)
// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@
(
kmalloc(sizeof(THING) * C2, ...)
|
kmalloc(sizeof(TYPE) * C2, ...)
|
kmalloc(C1 * C2 * C3, ...)
|
kmalloc(C1 * C2, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * (E2)
+ E2, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * E2
+ E2, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * (E2)
+ E2, sizeof(THING)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * E2
+ E2, sizeof(THING)
, ...)
|
- kmalloc
+ kmalloc_array
(
- (E1) * E2
+ E1, E2
, ...)
|
- kmalloc
+ kmalloc_array
(
- (E1) * (E2)
+ E1, E2
, ...)
|
- kmalloc
+ kmalloc_array
(
- E1 * E2
+ E1, E2
, ...)
)
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 20:55:00 +00:00
|
|
|
pm.buffer = kmalloc_array(pm.len, PM_ENTRY_BYTES, GFP_KERNEL);
|
2008-07-05 08:02:01 +00:00
|
|
|
ret = -ENOMEM;
|
2010-04-02 00:11:29 +00:00
|
|
|
if (!pm.buffer)
|
2015-09-08 21:59:59 +00:00
|
|
|
goto out_mm;
|
2008-02-05 06:29:04 +00:00
|
|
|
|
2008-07-05 08:02:01 +00:00
|
|
|
src = *ppos;
|
|
|
|
svpfn = src / PM_ENTRY_BYTES;
|
2015-09-08 21:59:59 +00:00
|
|
|
end_vaddr = mm->task_size;
|
2008-07-05 08:02:01 +00:00
|
|
|
|
|
|
|
/* watch out for wraparound */
|
proc: use untagged_addr() for pagemap_read addresses
When we try to visit the pagemap of a tagged userspace pointer, we find
that the start_vaddr is not correct because of the tag.
To fix it, we should untag the userspace pointers in pagemap_read().
I tested with 5.10-rc4 and the issue remains.
Explanation from Catalin in [1]:
"Arguably, that's a user-space bug since tagged file offsets were never
supported. In this case it's not even a tag at bit 56 as per the arm64
tagged address ABI but rather down to bit 47. You could say that the
problem is caused by the C library (malloc()) or whoever created the
tagged vaddr and passed it to this function. It's not a kernel
regression as we've never supported it.
Now, pagemap is a special case where the offset is usually not
generated as a classic file offset but rather derived by shifting a
user virtual address. I guess we can make a concession for pagemap
(only) and allow such offset with the tag at bit (56 - PAGE_SHIFT + 3)"
My test code is based on [2]:
A userspace pointer which has been tagged by 0xb4: 0xb400007662f541c8
userspace program:
uint64 OsLayer::VirtualToPhysical(void *vaddr) {
uint64 frame, paddr, pfnmask, pagemask;
int pagesize = sysconf(_SC_PAGESIZE);
off64_t off = ((uintptr_t)vaddr) / pagesize * 8; // off = 0xb400007662f541c8 / pagesize * 8 = 0x5a00003b317aa0
int fd = open(kPagemapPath, O_RDONLY);
...
if (lseek64(fd, off, SEEK_SET) != off || read(fd, &frame, 8) != 8) {
int err = errno;
string errtxt = ErrorString(err);
if (fd >= 0)
close(fd);
return 0;
}
...
}
kernel fs/proc/task_mmu.c:
static ssize_t pagemap_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
...
src = *ppos;
svpfn = src / PM_ENTRY_BYTES; // svpfn == 0xb400007662f54
start_vaddr = svpfn << PAGE_SHIFT; // start_vaddr == 0xb400007662f54000
end_vaddr = mm->task_size;
/* watch out for wraparound */
// svpfn == 0xb400007662f54
// (mm->task_size >> PAGE) == 0x8000000
if (svpfn > mm->task_size >> PAGE_SHIFT) // the condition is true because of the tag 0xb4
start_vaddr = end_vaddr;
ret = 0;
while (count && (start_vaddr < end_vaddr)) { // we cannot visit correct entry because start_vaddr is set to end_vaddr
int len;
unsigned long end;
...
}
...
}
[1] https://lore.kernel.org/patchwork/patch/1343258/
[2] https://github.com/stressapptest/stressapptest/blob/master/src/os.cc#L158
Link: https://lkml.kernel.org/r/20201204024347.8295-1-miles.chen@mediatek.com
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Song Bao Hua (Barry Song) <song.bao.hua@hisilicon.com>
Cc: <stable@vger.kernel.org> [5.4-]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-11 21:36:31 +00:00
|
|
|
start_vaddr = end_vaddr;
|
|
|
|
if (svpfn <= (ULONG_MAX >> PAGE_SHIFT))
|
|
|
|
start_vaddr = untagged_addr(svpfn << PAGE_SHIFT);
|
|
|
|
|
|
|
|
/* Ensure the address is inside the task */
|
|
|
|
if (start_vaddr > mm->task_size)
|
2008-07-05 08:02:01 +00:00
|
|
|
start_vaddr = end_vaddr;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The odds are that this will stop walking way
|
|
|
|
* before end_vaddr, because the length of the
|
|
|
|
* user buffer is tracked in "pm", and the walk
|
|
|
|
* will stop when we hit the end of the buffer.
|
|
|
|
*/
|
2010-04-02 00:11:29 +00:00
|
|
|
ret = 0;
|
|
|
|
while (count && (start_vaddr < end_vaddr)) {
|
|
|
|
int len;
|
|
|
|
unsigned long end;
|
|
|
|
|
|
|
|
pm.pos = 0;
|
2010-11-24 20:57:13 +00:00
|
|
|
end = (start_vaddr + PAGEMAP_WALK_SIZE) & PAGEMAP_WALK_MASK;
|
2010-04-02 00:11:29 +00:00
|
|
|
/* overflow ? */
|
|
|
|
if (end < start_vaddr || end > end_vaddr)
|
|
|
|
end = end_vaddr;
|
2020-06-09 04:33:25 +00:00
|
|
|
ret = mmap_read_lock_killable(mm);
|
2019-07-12 03:59:56 +00:00
|
|
|
if (ret)
|
|
|
|
goto out_free;
|
2019-08-28 14:19:54 +00:00
|
|
|
ret = walk_page_range(mm, start_vaddr, end, &pagemap_ops, &pm);
|
2020-06-09 04:33:25 +00:00
|
|
|
mmap_read_unlock(mm);
|
2010-04-02 00:11:29 +00:00
|
|
|
start_vaddr = end;
|
|
|
|
|
|
|
|
len = min(count, PM_ENTRY_BYTES * pm.pos);
|
2010-04-06 10:45:39 +00:00
|
|
|
if (copy_to_user(buf, pm.buffer, len)) {
|
2010-04-02 00:11:29 +00:00
|
|
|
ret = -EFAULT;
|
2015-09-08 21:59:59 +00:00
|
|
|
goto out_free;
|
2010-04-02 00:11:29 +00:00
|
|
|
}
|
|
|
|
copied += len;
|
|
|
|
buf += len;
|
|
|
|
count -= len;
|
2008-02-05 06:29:04 +00:00
|
|
|
}
|
2010-04-02 00:11:29 +00:00
|
|
|
*ppos += copied;
|
|
|
|
if (!ret || ret == PM_END_OF_BUFFER)
|
|
|
|
ret = copied;
|
|
|
|
|
2011-05-26 23:25:53 +00:00
|
|
|
out_free:
|
|
|
|
kfree(pm.buffer);
|
2015-09-08 21:59:59 +00:00
|
|
|
out_mm:
|
|
|
|
mmput(mm);
|
2008-02-05 06:29:04 +00:00
|
|
|
out:
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2013-07-03 22:01:22 +00:00
|
|
|
static int pagemap_open(struct inode *inode, struct file *file)
|
|
|
|
{
|
2015-09-08 21:59:59 +00:00
|
|
|
struct mm_struct *mm;
|
|
|
|
|
|
|
|
mm = proc_mem_open(inode, PTRACE_MODE_READ);
|
|
|
|
if (IS_ERR(mm))
|
|
|
|
return PTR_ERR(mm);
|
|
|
|
file->private_data = mm;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int pagemap_release(struct inode *inode, struct file *file)
|
|
|
|
{
|
|
|
|
struct mm_struct *mm = file->private_data;
|
|
|
|
|
|
|
|
if (mm)
|
|
|
|
mmdrop(mm);
|
2013-07-03 22:01:22 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2008-02-05 06:29:04 +00:00
|
|
|
const struct file_operations proc_pagemap_operations = {
|
|
|
|
.llseek = mem_lseek, /* borrow this */
|
|
|
|
.read = pagemap_read,
|
2013-07-03 22:01:22 +00:00
|
|
|
.open = pagemap_open,
|
2015-09-08 21:59:59 +00:00
|
|
|
.release = pagemap_release,
|
2008-02-05 06:29:04 +00:00
|
|
|
};
|
2008-02-05 06:29:07 +00:00
|
|
|
#endif /* CONFIG_PROC_PAGE_MONITOR */
|
2008-02-05 06:29:04 +00:00
|
|
|
|
2005-09-03 22:54:45 +00:00
|
|
|
#ifdef CONFIG_NUMA
|
|
|
|
|
2011-05-25 00:12:47 +00:00
|
|
|
struct numa_maps {
|
|
|
|
unsigned long pages;
|
|
|
|
unsigned long anon;
|
|
|
|
unsigned long active;
|
|
|
|
unsigned long writeback;
|
|
|
|
unsigned long mapcount_max;
|
|
|
|
unsigned long dirty;
|
|
|
|
unsigned long swapcache;
|
|
|
|
unsigned long node[MAX_NUMNODES];
|
|
|
|
};
|
|
|
|
|
2011-05-25 00:12:49 +00:00
|
|
|
struct numa_maps_private {
|
|
|
|
struct proc_maps_private proc_maps;
|
|
|
|
struct numa_maps md;
|
|
|
|
};
|
|
|
|
|
2011-09-20 22:19:38 +00:00
|
|
|
static void gather_stats(struct page *page, struct numa_maps *md, int pte_dirty,
|
|
|
|
unsigned long nr_pages)
|
2011-05-25 00:12:47 +00:00
|
|
|
{
|
|
|
|
int count = page_mapcount(page);
|
|
|
|
|
2011-09-20 22:19:38 +00:00
|
|
|
md->pages += nr_pages;
|
2011-05-25 00:12:47 +00:00
|
|
|
if (pte_dirty || PageDirty(page))
|
2011-09-20 22:19:38 +00:00
|
|
|
md->dirty += nr_pages;
|
2011-05-25 00:12:47 +00:00
|
|
|
|
|
|
|
if (PageSwapCache(page))
|
2011-09-20 22:19:38 +00:00
|
|
|
md->swapcache += nr_pages;
|
2011-05-25 00:12:47 +00:00
|
|
|
|
|
|
|
if (PageActive(page) || PageUnevictable(page))
|
2011-09-20 22:19:38 +00:00
|
|
|
md->active += nr_pages;
|
2011-05-25 00:12:47 +00:00
|
|
|
|
|
|
|
if (PageWriteback(page))
|
2011-09-20 22:19:38 +00:00
|
|
|
md->writeback += nr_pages;
|
2011-05-25 00:12:47 +00:00
|
|
|
|
|
|
|
if (PageAnon(page))
|
2011-09-20 22:19:38 +00:00
|
|
|
md->anon += nr_pages;
|
2011-05-25 00:12:47 +00:00
|
|
|
|
|
|
|
if (count > md->mapcount_max)
|
|
|
|
md->mapcount_max = count;
|
|
|
|
|
2011-09-20 22:19:38 +00:00
|
|
|
md->node[page_to_nid(page)] += nr_pages;
|
2011-05-25 00:12:47 +00:00
|
|
|
}
|
|
|
|
|
2011-09-20 22:19:39 +00:00
|
|
|
static struct page *can_gather_numa_stats(pte_t pte, struct vm_area_struct *vma,
|
|
|
|
unsigned long addr)
|
|
|
|
{
|
|
|
|
struct page *page;
|
|
|
|
int nid;
|
|
|
|
|
|
|
|
if (!pte_present(pte))
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
page = vm_normal_page(vma, addr, pte);
|
|
|
|
if (!page)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
if (PageReserved(page))
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
nid = page_to_nid(page);
|
2012-12-12 21:51:25 +00:00
|
|
|
if (!node_isset(nid, node_states[N_MEMORY]))
|
2011-09-20 22:19:39 +00:00
|
|
|
return NULL;
|
|
|
|
|
|
|
|
return page;
|
|
|
|
}
|
|
|
|
|
2016-04-28 23:18:35 +00:00
|
|
|
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
|
|
|
|
static struct page *can_gather_numa_stats_pmd(pmd_t pmd,
|
|
|
|
struct vm_area_struct *vma,
|
|
|
|
unsigned long addr)
|
|
|
|
{
|
|
|
|
struct page *page;
|
|
|
|
int nid;
|
|
|
|
|
|
|
|
if (!pmd_present(pmd))
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
page = vm_normal_page_pmd(vma, addr, pmd);
|
|
|
|
if (!page)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
if (PageReserved(page))
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
nid = page_to_nid(page);
|
|
|
|
if (!node_isset(nid, node_states[N_MEMORY]))
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
return page;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2011-05-25 00:12:47 +00:00
|
|
|
static int gather_pte_stats(pmd_t *pmd, unsigned long addr,
|
|
|
|
unsigned long end, struct mm_walk *walk)
|
|
|
|
{
|
2015-02-11 23:27:54 +00:00
|
|
|
struct numa_maps *md = walk->private;
|
|
|
|
struct vm_area_struct *vma = walk->vma;
|
2011-05-25 00:12:47 +00:00
|
|
|
spinlock_t *ptl;
|
|
|
|
pte_t *orig_pte;
|
|
|
|
pte_t *pte;
|
|
|
|
|
2016-04-28 23:18:35 +00:00
|
|
|
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
|
2016-01-22 00:40:25 +00:00
|
|
|
ptl = pmd_trans_huge_lock(pmd, vma);
|
|
|
|
if (ptl) {
|
2012-03-21 23:33:57 +00:00
|
|
|
struct page *page;
|
|
|
|
|
2016-04-28 23:18:35 +00:00
|
|
|
page = can_gather_numa_stats_pmd(*pmd, vma, addr);
|
2012-03-21 23:33:57 +00:00
|
|
|
if (page)
|
2016-04-28 23:18:35 +00:00
|
|
|
gather_stats(page, md, pmd_dirty(*pmd),
|
2012-03-21 23:33:57 +00:00
|
|
|
HPAGE_PMD_SIZE/PAGE_SIZE);
|
2013-11-14 22:30:54 +00:00
|
|
|
spin_unlock(ptl);
|
2012-03-21 23:33:57 +00:00
|
|
|
return 0;
|
2011-09-20 22:19:41 +00:00
|
|
|
}
|
|
|
|
|
mm: thp: fix pmd_bad() triggering in code paths holding mmap_sem read mode
In some cases it may happen that pmd_none_or_clear_bad() is called with
the mmap_sem hold in read mode. In those cases the huge page faults can
allocate hugepmds under pmd_none_or_clear_bad() and that can trigger a
false positive from pmd_bad() that will not like to see a pmd
materializing as trans huge.
It's not khugepaged causing the problem, khugepaged holds the mmap_sem
in write mode (and all those sites must hold the mmap_sem in read mode
to prevent pagetables to go away from under them, during code review it
seems vm86 mode on 32bit kernels requires that too unless it's
restricted to 1 thread per process or UP builds). The race is only with
the huge pagefaults that can convert a pmd_none() into a
pmd_trans_huge().
Effectively all these pmd_none_or_clear_bad() sites running with
mmap_sem in read mode are somewhat speculative with the page faults, and
the result is always undefined when they run simultaneously. This is
probably why it wasn't common to run into this. For example if the
madvise(MADV_DONTNEED) runs zap_page_range() shortly before the page
fault, the hugepage will not be zapped, if the page fault runs first it
will be zapped.
Altering pmd_bad() not to error out if it finds hugepmds won't be enough
to fix this, because zap_pmd_range would then proceed to call
zap_pte_range (which would be incorrect if the pmd become a
pmd_trans_huge()).
The simplest way to fix this is to read the pmd in the local stack
(regardless of what we read, no need of actual CPU barriers, only
compiler barrier needed), and be sure it is not changing under the code
that computes its value. Even if the real pmd is changing under the
value we hold on the stack, we don't care. If we actually end up in
zap_pte_range it means the pmd was not none already and it was not huge,
and it can't become huge from under us (khugepaged locking explained
above).
All we need is to enforce that there is no way anymore that in a code
path like below, pmd_trans_huge can be false, but pmd_none_or_clear_bad
can run into a hugepmd. The overhead of a barrier() is just a compiler
tweak and should not be measurable (I only added it for THP builds). I
don't exclude different compiler versions may have prevented the race
too by caching the value of *pmd on the stack (that hasn't been
verified, but it wouldn't be impossible considering
pmd_none_or_clear_bad, pmd_bad, pmd_trans_huge, pmd_none are all inlines
and there's no external function called in between pmd_trans_huge and
pmd_none_or_clear_bad).
if (pmd_trans_huge(*pmd)) {
if (next-addr != HPAGE_PMD_SIZE) {
VM_BUG_ON(!rwsem_is_locked(&tlb->mm->mmap_sem));
split_huge_page_pmd(vma->vm_mm, pmd);
} else if (zap_huge_pmd(tlb, vma, pmd, addr))
continue;
/* fall through */
}
if (pmd_none_or_clear_bad(pmd))
Because this race condition could be exercised without special
privileges this was reported in CVE-2012-1179.
The race was identified and fully explained by Ulrich who debugged it.
I'm quoting his accurate explanation below, for reference.
====== start quote =======
mapcount 0 page_mapcount 1
kernel BUG at mm/huge_memory.c:1384!
At some point prior to the panic, a "bad pmd ..." message similar to the
following is logged on the console:
mm/memory.c:145: bad pmd ffff8800376e1f98(80000000314000e7).
The "bad pmd ..." message is logged by pmd_clear_bad() before it clears
the page's PMD table entry.
143 void pmd_clear_bad(pmd_t *pmd)
144 {
-> 145 pmd_ERROR(*pmd);
146 pmd_clear(pmd);
147 }
After the PMD table entry has been cleared, there is an inconsistency
between the actual number of PMD table entries that are mapping the page
and the page's map count (_mapcount field in struct page). When the page
is subsequently reclaimed, __split_huge_page() detects this inconsistency.
1381 if (mapcount != page_mapcount(page))
1382 printk(KERN_ERR "mapcount %d page_mapcount %d\n",
1383 mapcount, page_mapcount(page));
-> 1384 BUG_ON(mapcount != page_mapcount(page));
The root cause of the problem is a race of two threads in a multithreaded
process. Thread B incurs a page fault on a virtual address that has never
been accessed (PMD entry is zero) while Thread A is executing an madvise()
system call on a virtual address within the same 2 MB (huge page) range.
virtual address space
.---------------------.
| |
| |
.-|---------------------|
| | |
| | |<-- B(fault)
| | |
2 MB | |/////////////////////|-.
huge < |/////////////////////| > A(range)
page | |/////////////////////|-'
| | |
| | |
'-|---------------------|
| |
| |
'---------------------'
- Thread A is executing an madvise(..., MADV_DONTNEED) system call
on the virtual address range "A(range)" shown in the picture.
sys_madvise
// Acquire the semaphore in shared mode.
down_read(¤t->mm->mmap_sem)
...
madvise_vma
switch (behavior)
case MADV_DONTNEED:
madvise_dontneed
zap_page_range
unmap_vmas
unmap_page_range
zap_pud_range
zap_pmd_range
//
// Assume that this huge page has never been accessed.
// I.e. content of the PMD entry is zero (not mapped).
//
if (pmd_trans_huge(*pmd)) {
// We don't get here due to the above assumption.
}
//
// Assume that Thread B incurred a page fault and
.---------> // sneaks in here as shown below.
| //
| if (pmd_none_or_clear_bad(pmd))
| {
| if (unlikely(pmd_bad(*pmd)))
| pmd_clear_bad
| {
| pmd_ERROR
| // Log "bad pmd ..." message here.
| pmd_clear
| // Clear the page's PMD entry.
| // Thread B incremented the map count
| // in page_add_new_anon_rmap(), but
| // now the page is no longer mapped
| // by a PMD entry (-> inconsistency).
| }
| }
|
v
- Thread B is handling a page fault on virtual address "B(fault)" shown
in the picture.
...
do_page_fault
__do_page_fault
// Acquire the semaphore in shared mode.
down_read_trylock(&mm->mmap_sem)
...
handle_mm_fault
if (pmd_none(*pmd) && transparent_hugepage_enabled(vma))
// We get here due to the above assumption (PMD entry is zero).
do_huge_pmd_anonymous_page
alloc_hugepage_vma
// Allocate a new transparent huge page here.
...
__do_huge_pmd_anonymous_page
...
spin_lock(&mm->page_table_lock)
...
page_add_new_anon_rmap
// Here we increment the page's map count (starts at -1).
atomic_set(&page->_mapcount, 0)
set_pmd_at
// Here we set the page's PMD entry which will be cleared
// when Thread A calls pmd_clear_bad().
...
spin_unlock(&mm->page_table_lock)
The mmap_sem does not prevent the race because both threads are acquiring
it in shared mode (down_read). Thread B holds the page_table_lock while
the page's map count and PMD table entry are updated. However, Thread A
does not synchronize on that lock.
====== end quote =======
[akpm@linux-foundation.org: checkpatch fixes]
Reported-by: Ulrich Obergfell <uobergfe@redhat.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Jones <davej@redhat.com>
Acked-by: Larry Woodman <lwoodman@redhat.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: <stable@vger.kernel.org> [2.6.38+]
Cc: Mark Salter <msalter@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:33:42 +00:00
|
|
|
if (pmd_trans_unstable(pmd))
|
|
|
|
return 0;
|
2016-04-28 23:18:35 +00:00
|
|
|
#endif
|
2011-05-25 00:12:47 +00:00
|
|
|
orig_pte = pte = pte_offset_map_lock(walk->mm, pmd, addr, &ptl);
|
|
|
|
do {
|
2015-02-11 23:27:54 +00:00
|
|
|
struct page *page = can_gather_numa_stats(*pte, vma, addr);
|
2011-05-25 00:12:47 +00:00
|
|
|
if (!page)
|
|
|
|
continue;
|
2011-09-20 22:19:38 +00:00
|
|
|
gather_stats(page, md, pte_dirty(*pte), 1);
|
2011-05-25 00:12:47 +00:00
|
|
|
|
|
|
|
} while (pte++, addr += PAGE_SIZE, addr != end);
|
|
|
|
pte_unmap_unlock(orig_pte, ptl);
|
2016-12-13 00:44:47 +00:00
|
|
|
cond_resched();
|
2011-05-25 00:12:47 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
#ifdef CONFIG_HUGETLB_PAGE
|
2015-02-11 23:27:51 +00:00
|
|
|
static int gather_hugetlb_stats(pte_t *pte, unsigned long hmask,
|
2011-05-25 00:12:47 +00:00
|
|
|
unsigned long addr, unsigned long end, struct mm_walk *walk)
|
|
|
|
{
|
2016-02-03 00:57:26 +00:00
|
|
|
pte_t huge_pte = huge_ptep_get(pte);
|
2011-05-25 00:12:47 +00:00
|
|
|
struct numa_maps *md;
|
|
|
|
struct page *page;
|
|
|
|
|
2016-02-03 00:57:26 +00:00
|
|
|
if (!pte_present(huge_pte))
|
2011-05-25 00:12:47 +00:00
|
|
|
return 0;
|
|
|
|
|
2016-02-03 00:57:26 +00:00
|
|
|
page = pte_page(huge_pte);
|
2011-05-25 00:12:47 +00:00
|
|
|
if (!page)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
md = walk->private;
|
2016-02-03 00:57:26 +00:00
|
|
|
gather_stats(page, md, pte_dirty(huge_pte), 1);
|
2011-05-25 00:12:47 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
#else
|
2015-02-11 23:27:51 +00:00
|
|
|
static int gather_hugetlb_stats(pte_t *pte, unsigned long hmask,
|
2011-05-25 00:12:47 +00:00
|
|
|
unsigned long addr, unsigned long end, struct mm_walk *walk)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2019-08-28 14:19:54 +00:00
|
|
|
static const struct mm_walk_ops show_numa_ops = {
|
|
|
|
.hugetlb_entry = gather_hugetlb_stats,
|
|
|
|
.pmd_entry = gather_pte_stats,
|
|
|
|
};
|
|
|
|
|
2011-05-25 00:12:47 +00:00
|
|
|
/*
|
|
|
|
* Display pages allocated per node and memory policy via /proc.
|
|
|
|
*/
|
2018-08-22 04:52:48 +00:00
|
|
|
static int show_numa_map(struct seq_file *m, void *v)
|
2011-05-25 00:12:47 +00:00
|
|
|
{
|
2011-05-25 00:12:49 +00:00
|
|
|
struct numa_maps_private *numa_priv = m->private;
|
|
|
|
struct proc_maps_private *proc_priv = &numa_priv->proc_maps;
|
2011-05-25 00:12:47 +00:00
|
|
|
struct vm_area_struct *vma = v;
|
2011-05-25 00:12:49 +00:00
|
|
|
struct numa_maps *md = &numa_priv->md;
|
2011-05-25 00:12:47 +00:00
|
|
|
struct file *file = vma->vm_file;
|
|
|
|
struct mm_struct *mm = vma->vm_mm;
|
|
|
|
struct mempolicy *pol;
|
2013-11-12 23:07:28 +00:00
|
|
|
char buffer[64];
|
|
|
|
int nid;
|
2011-05-25 00:12:47 +00:00
|
|
|
|
|
|
|
if (!mm)
|
|
|
|
return 0;
|
|
|
|
|
2011-05-25 00:12:49 +00:00
|
|
|
/* Ensure we start with an empty set of numa_maps statistics. */
|
|
|
|
memset(md, 0, sizeof(*md));
|
2011-05-25 00:12:47 +00:00
|
|
|
|
2014-10-09 22:27:52 +00:00
|
|
|
pol = __get_vma_policy(vma, vma->vm_start);
|
|
|
|
if (pol) {
|
|
|
|
mpol_to_str(buffer, sizeof(buffer), pol);
|
|
|
|
mpol_cond_put(pol);
|
|
|
|
} else {
|
|
|
|
mpol_to_str(buffer, sizeof(buffer), proc_priv->task_mempolicy);
|
|
|
|
}
|
2011-05-25 00:12:47 +00:00
|
|
|
|
|
|
|
seq_printf(m, "%08lx %s", vma->vm_start, buffer);
|
|
|
|
|
|
|
|
if (file) {
|
2014-06-06 21:37:03 +00:00
|
|
|
seq_puts(m, " file=");
|
2015-06-19 08:30:28 +00:00
|
|
|
seq_file_path(m, file, "\n\t= ");
|
2011-05-25 00:12:47 +00:00
|
|
|
} else if (vma->vm_start <= mm->brk && vma->vm_end >= mm->start_brk) {
|
2014-06-06 21:37:03 +00:00
|
|
|
seq_puts(m, " heap");
|
2017-09-08 23:13:35 +00:00
|
|
|
} else if (is_stack(vma)) {
|
2016-02-03 00:57:29 +00:00
|
|
|
seq_puts(m, " stack");
|
2011-05-25 00:12:47 +00:00
|
|
|
}
|
|
|
|
|
2011-11-01 00:06:32 +00:00
|
|
|
if (is_vm_hugetlb_page(vma))
|
2014-06-06 21:37:03 +00:00
|
|
|
seq_puts(m, " huge");
|
2011-11-01 00:06:32 +00:00
|
|
|
|
2020-06-09 04:33:54 +00:00
|
|
|
/* mmap_lock is held by m_start */
|
2019-08-28 14:19:54 +00:00
|
|
|
walk_page_vma(vma, &show_numa_ops, md);
|
2011-05-25 00:12:47 +00:00
|
|
|
|
|
|
|
if (!md->pages)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
if (md->anon)
|
|
|
|
seq_printf(m, " anon=%lu", md->anon);
|
|
|
|
|
|
|
|
if (md->dirty)
|
|
|
|
seq_printf(m, " dirty=%lu", md->dirty);
|
|
|
|
|
|
|
|
if (md->pages != md->anon && md->pages != md->dirty)
|
|
|
|
seq_printf(m, " mapped=%lu", md->pages);
|
|
|
|
|
|
|
|
if (md->mapcount_max > 1)
|
|
|
|
seq_printf(m, " mapmax=%lu", md->mapcount_max);
|
|
|
|
|
|
|
|
if (md->swapcache)
|
|
|
|
seq_printf(m, " swapcache=%lu", md->swapcache);
|
|
|
|
|
|
|
|
if (md->active < md->pages && !is_vm_hugetlb_page(vma))
|
|
|
|
seq_printf(m, " active=%lu", md->active);
|
|
|
|
|
|
|
|
if (md->writeback)
|
|
|
|
seq_printf(m, " writeback=%lu", md->writeback);
|
|
|
|
|
2013-11-12 23:07:28 +00:00
|
|
|
for_each_node_state(nid, N_MEMORY)
|
|
|
|
if (md->node[nid])
|
|
|
|
seq_printf(m, " N%d=%lu", nid, md->node[nid]);
|
2015-02-12 23:01:08 +00:00
|
|
|
|
|
|
|
seq_printf(m, " kernelpagesize_kB=%lu", vma_kernel_pagesize(vma) >> 10);
|
2011-05-25 00:12:47 +00:00
|
|
|
out:
|
|
|
|
seq_putc(m, '\n');
|
|
|
|
return 0;
|
|
|
|
}
|
2011-05-25 00:12:49 +00:00
|
|
|
|
2008-02-08 12:21:19 +00:00
|
|
|
static const struct seq_operations proc_pid_numa_maps_op = {
|
procfs: mark thread stack correctly in proc/<pid>/maps
Stack for a new thread is mapped by userspace code and passed via
sys_clone. This memory is currently seen as anonymous in
/proc/<pid>/maps, which makes it difficult to ascertain which mappings
are being used for thread stacks. This patch uses the individual task
stack pointers to determine which vmas are actually thread stacks.
For a multithreaded program like the following:
#include <pthread.h>
void *thread_main(void *foo)
{
while(1);
}
int main()
{
pthread_t t;
pthread_create(&t, NULL, thread_main, NULL);
pthread_join(t, NULL);
}
proc/PID/maps looks like the following:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
Here, one could guess that 7f8a44492000-7f8a44c92000 is a stack since
the earlier vma that has no permissions (7f8a44e3d000-7f8a4503d000) but
that is not always a reliable way to find out which vma is a thread
stack. Also, /proc/PID/maps and /proc/PID/task/TID/maps has the same
content.
With this patch in place, /proc/PID/task/TID/maps are treated as 'maps
as the task would see it' and hence, only the vma that that task uses as
stack is marked as [stack]. All other 'stack' vmas are marked as
anonymous memory. /proc/PID/maps acts as a thread group level view,
where all thread stack vmas are marked as [stack:TID] where TID is the
process ID of the task that uses that vma as stack, while the process
stack is marked as [stack].
So /proc/PID/maps will look like this:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack:1442]
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
Thus marking all vmas that are used as stacks by the threads in the
thread group along with the process stack. The task level maps will
however like this:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack]
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
where only the vma that is being used as a stack by *that* task is
marked as [stack].
Analogous changes have been made to /proc/PID/smaps,
/proc/PID/numa_maps, /proc/PID/task/TID/smaps and
/proc/PID/task/TID/numa_maps. Relevant snippets from smaps and
numa_maps:
[siddhesh@localhost ~ ]$ pgrep a.out
1441
[siddhesh@localhost ~ ]$ cat /proc/1441/smaps | grep "\[stack"
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack:1442]
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1442/smaps | grep "\[stack"
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1441/smaps | grep "\[stack"
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/numa_maps | grep "stack"
7f8a44492000 default stack:1442 anon=2 dirty=2 N0=2
7fff6273a000 default stack anon=3 dirty=3 N0=3
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1442/numa_maps | grep "stack"
7f8a44492000 default stack anon=2 dirty=2 N0=2
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1441/numa_maps | grep "stack"
7fff6273a000 default stack anon=3 dirty=3 N0=3
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix build]
Signed-off-by: Siddhesh Poyarekar <siddhesh.poyarekar@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jamie Lokier <jamie@shareable.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:04 +00:00
|
|
|
.start = m_start,
|
|
|
|
.next = m_next,
|
|
|
|
.stop = m_stop,
|
2018-08-22 04:52:48 +00:00
|
|
|
.show = show_numa_map,
|
2005-09-03 22:54:45 +00:00
|
|
|
};
|
2006-06-26 07:25:48 +00:00
|
|
|
|
procfs: mark thread stack correctly in proc/<pid>/maps
Stack for a new thread is mapped by userspace code and passed via
sys_clone. This memory is currently seen as anonymous in
/proc/<pid>/maps, which makes it difficult to ascertain which mappings
are being used for thread stacks. This patch uses the individual task
stack pointers to determine which vmas are actually thread stacks.
For a multithreaded program like the following:
#include <pthread.h>
void *thread_main(void *foo)
{
while(1);
}
int main()
{
pthread_t t;
pthread_create(&t, NULL, thread_main, NULL);
pthread_join(t, NULL);
}
proc/PID/maps looks like the following:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
Here, one could guess that 7f8a44492000-7f8a44c92000 is a stack since
the earlier vma that has no permissions (7f8a44e3d000-7f8a4503d000) but
that is not always a reliable way to find out which vma is a thread
stack. Also, /proc/PID/maps and /proc/PID/task/TID/maps has the same
content.
With this patch in place, /proc/PID/task/TID/maps are treated as 'maps
as the task would see it' and hence, only the vma that that task uses as
stack is marked as [stack]. All other 'stack' vmas are marked as
anonymous memory. /proc/PID/maps acts as a thread group level view,
where all thread stack vmas are marked as [stack:TID] where TID is the
process ID of the task that uses that vma as stack, while the process
stack is marked as [stack].
So /proc/PID/maps will look like this:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack:1442]
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
Thus marking all vmas that are used as stacks by the threads in the
thread group along with the process stack. The task level maps will
however like this:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack]
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
where only the vma that is being used as a stack by *that* task is
marked as [stack].
Analogous changes have been made to /proc/PID/smaps,
/proc/PID/numa_maps, /proc/PID/task/TID/smaps and
/proc/PID/task/TID/numa_maps. Relevant snippets from smaps and
numa_maps:
[siddhesh@localhost ~ ]$ pgrep a.out
1441
[siddhesh@localhost ~ ]$ cat /proc/1441/smaps | grep "\[stack"
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack:1442]
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1442/smaps | grep "\[stack"
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1441/smaps | grep "\[stack"
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/numa_maps | grep "stack"
7f8a44492000 default stack:1442 anon=2 dirty=2 N0=2
7fff6273a000 default stack anon=3 dirty=3 N0=3
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1442/numa_maps | grep "stack"
7f8a44492000 default stack anon=2 dirty=2 N0=2
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1441/numa_maps | grep "stack"
7fff6273a000 default stack anon=3 dirty=3 N0=3
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix build]
Signed-off-by: Siddhesh Poyarekar <siddhesh.poyarekar@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jamie Lokier <jamie@shareable.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:04 +00:00
|
|
|
static int pid_numa_maps_open(struct inode *inode, struct file *file)
|
|
|
|
{
|
2018-08-22 04:52:48 +00:00
|
|
|
return proc_maps_open(inode, file, &proc_pid_numa_maps_op,
|
|
|
|
sizeof(struct numa_maps_private));
|
procfs: mark thread stack correctly in proc/<pid>/maps
Stack for a new thread is mapped by userspace code and passed via
sys_clone. This memory is currently seen as anonymous in
/proc/<pid>/maps, which makes it difficult to ascertain which mappings
are being used for thread stacks. This patch uses the individual task
stack pointers to determine which vmas are actually thread stacks.
For a multithreaded program like the following:
#include <pthread.h>
void *thread_main(void *foo)
{
while(1);
}
int main()
{
pthread_t t;
pthread_create(&t, NULL, thread_main, NULL);
pthread_join(t, NULL);
}
proc/PID/maps looks like the following:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
Here, one could guess that 7f8a44492000-7f8a44c92000 is a stack since
the earlier vma that has no permissions (7f8a44e3d000-7f8a4503d000) but
that is not always a reliable way to find out which vma is a thread
stack. Also, /proc/PID/maps and /proc/PID/task/TID/maps has the same
content.
With this patch in place, /proc/PID/task/TID/maps are treated as 'maps
as the task would see it' and hence, only the vma that that task uses as
stack is marked as [stack]. All other 'stack' vmas are marked as
anonymous memory. /proc/PID/maps acts as a thread group level view,
where all thread stack vmas are marked as [stack:TID] where TID is the
process ID of the task that uses that vma as stack, while the process
stack is marked as [stack].
So /proc/PID/maps will look like this:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack:1442]
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
Thus marking all vmas that are used as stacks by the threads in the
thread group along with the process stack. The task level maps will
however like this:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack]
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
where only the vma that is being used as a stack by *that* task is
marked as [stack].
Analogous changes have been made to /proc/PID/smaps,
/proc/PID/numa_maps, /proc/PID/task/TID/smaps and
/proc/PID/task/TID/numa_maps. Relevant snippets from smaps and
numa_maps:
[siddhesh@localhost ~ ]$ pgrep a.out
1441
[siddhesh@localhost ~ ]$ cat /proc/1441/smaps | grep "\[stack"
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack:1442]
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1442/smaps | grep "\[stack"
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1441/smaps | grep "\[stack"
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/numa_maps | grep "stack"
7f8a44492000 default stack:1442 anon=2 dirty=2 N0=2
7fff6273a000 default stack anon=3 dirty=3 N0=3
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1442/numa_maps | grep "stack"
7f8a44492000 default stack anon=2 dirty=2 N0=2
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1441/numa_maps | grep "stack"
7fff6273a000 default stack anon=3 dirty=3 N0=3
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix build]
Signed-off-by: Siddhesh Poyarekar <siddhesh.poyarekar@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jamie Lokier <jamie@shareable.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:04 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
const struct file_operations proc_pid_numa_maps_operations = {
|
|
|
|
.open = pid_numa_maps_open,
|
|
|
|
.read = seq_read,
|
|
|
|
.llseek = seq_lseek,
|
2014-10-09 22:25:26 +00:00
|
|
|
.release = proc_map_release,
|
procfs: mark thread stack correctly in proc/<pid>/maps
Stack for a new thread is mapped by userspace code and passed via
sys_clone. This memory is currently seen as anonymous in
/proc/<pid>/maps, which makes it difficult to ascertain which mappings
are being used for thread stacks. This patch uses the individual task
stack pointers to determine which vmas are actually thread stacks.
For a multithreaded program like the following:
#include <pthread.h>
void *thread_main(void *foo)
{
while(1);
}
int main()
{
pthread_t t;
pthread_create(&t, NULL, thread_main, NULL);
pthread_join(t, NULL);
}
proc/PID/maps looks like the following:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
Here, one could guess that 7f8a44492000-7f8a44c92000 is a stack since
the earlier vma that has no permissions (7f8a44e3d000-7f8a4503d000) but
that is not always a reliable way to find out which vma is a thread
stack. Also, /proc/PID/maps and /proc/PID/task/TID/maps has the same
content.
With this patch in place, /proc/PID/task/TID/maps are treated as 'maps
as the task would see it' and hence, only the vma that that task uses as
stack is marked as [stack]. All other 'stack' vmas are marked as
anonymous memory. /proc/PID/maps acts as a thread group level view,
where all thread stack vmas are marked as [stack:TID] where TID is the
process ID of the task that uses that vma as stack, while the process
stack is marked as [stack].
So /proc/PID/maps will look like this:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack:1442]
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
Thus marking all vmas that are used as stacks by the threads in the
thread group along with the process stack. The task level maps will
however like this:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack]
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
where only the vma that is being used as a stack by *that* task is
marked as [stack].
Analogous changes have been made to /proc/PID/smaps,
/proc/PID/numa_maps, /proc/PID/task/TID/smaps and
/proc/PID/task/TID/numa_maps. Relevant snippets from smaps and
numa_maps:
[siddhesh@localhost ~ ]$ pgrep a.out
1441
[siddhesh@localhost ~ ]$ cat /proc/1441/smaps | grep "\[stack"
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack:1442]
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1442/smaps | grep "\[stack"
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1441/smaps | grep "\[stack"
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/numa_maps | grep "stack"
7f8a44492000 default stack:1442 anon=2 dirty=2 N0=2
7fff6273a000 default stack anon=3 dirty=3 N0=3
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1442/numa_maps | grep "stack"
7f8a44492000 default stack anon=2 dirty=2 N0=2
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1441/numa_maps | grep "stack"
7fff6273a000 default stack anon=3 dirty=3 N0=3
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix build]
Signed-off-by: Siddhesh Poyarekar <siddhesh.poyarekar@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jamie Lokier <jamie@shareable.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:04 +00:00
|
|
|
};
|
|
|
|
|
2011-05-25 00:12:47 +00:00
|
|
|
#endif /* CONFIG_NUMA */
|