License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
|
|
|
/* SPDX-License-Identifier: GPL-2.0 */
|
2009-09-24 16:02:18 +00:00
|
|
|
#ifndef __PERF_HEADER_H
|
|
|
|
#define __PERF_HEADER_H
|
2009-06-25 15:05:54 +00:00
|
|
|
|
2018-07-30 16:15:03 +00:00
|
|
|
#include <linux/stddef.h>
|
2012-11-19 22:21:03 +00:00
|
|
|
#include <linux/perf_event.h>
|
2009-06-25 15:05:54 +00:00
|
|
|
#include <sys/types.h>
|
2019-09-10 15:42:52 +00:00
|
|
|
#include <stdio.h> // FILE
|
perf symbols: Use the buildids if present
With this change 'perf record' will intercept PERF_RECORD_MMAP
calls, creating a linked list of DSOs, then when the session
finishes, it will traverse this list and read the buildids,
stashing them at the end of the file and will set up a new
feature bit in the header bitmask.
'perf report' will then notice this feature and populate the
'dsos' list and set the build ids.
When reading the symtabs it will refuse to load from a file that
doesn't have the same build id. This improves the
reliability of the profiler output, as symbols and profiling
data is more guaranteed to match.
Example:
[root@doppio ~]# perf report | head
/home/acme/bin/perf with build id b1ea544ac3746e7538972548a09aadecc5753868 not found, continuing without symbols
# Samples: 2621434559
#
# Overhead Command Shared Object Symbol
# ........ ............... ............................. ......
#
7.91% init [kernel] [k] read_hpet
7.64% init [kernel] [k] mwait_idle_with_hints
7.60% swapper [kernel] [k] read_hpet
7.60% swapper [kernel] [k] mwait_idle_with_hints
3.65% init [kernel] [k] 0xffffffffa02339d9
[root@doppio ~]#
In this case the 'perf' binary was an older one, vanished,
so its symbols probably wouldn't match or would cause subtly
different (and misleading) output.
Next patches will support the kernel as well, reading the build
id notes for it and the modules from /sys.
Another patch should also introduce a new plumbing command:
'perf list-buildids'
that will then be used in porcelain that is distro specific to
fetch -debuginfo packages where such buildids are present. This
will in turn allow for one to run 'perf record' in one machine
and 'perf report' in another.
Future work on having the buildid sent directly from the kernel
in the PERF_RECORD_MMAP event is needed to close races, as the
DSO can be changed during a 'perf record' session, but this
patch at least helps with non-corner cases and current/older
kernels.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: K. Prasad <prasad@linux.vnet.ibm.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roland McGrath <roland@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1257367843-26224-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-04 20:50:43 +00:00
|
|
|
#include <stdbool.h>
|
2014-04-25 19:31:02 +00:00
|
|
|
#include <linux/bitmap.h>
|
|
|
|
#include <linux/types.h>
|
2015-09-08 16:30:00 +00:00
|
|
|
#include "env.h"
|
2017-10-16 18:32:18 +00:00
|
|
|
#include "pmu.h"
|
2009-10-17 15:57:18 +00:00
|
|
|
|
2009-11-16 18:32:43 +00:00
|
|
|
enum {
|
2011-12-07 09:02:57 +00:00
|
|
|
HEADER_RESERVED = 0, /* always cleared */
|
2011-12-15 16:32:40 +00:00
|
|
|
HEADER_FIRST_FEATURE = 1,
|
2012-05-15 11:28:13 +00:00
|
|
|
HEADER_TRACING_DATA = 1,
|
2009-11-16 18:32:43 +00:00
|
|
|
HEADER_BUILD_ID,
|
perf tools: Make perf.data more self-descriptive (v8)
The goal of this patch is to include more information about the host
environment into the perf.data so it is more self-descriptive. Overtime,
profiles are captured on various machines and it becomes hard to track
what was recorded, on what machine and when.
This patch provides a way to solve this by extending the perf.data file
with basic information about the host machine. To add those extensions,
we leverage the feature bits capabilities of the perf.data format. The
change is backward compatible with existing perf.data files.
We define the following useful new extensions:
- HEADER_HOSTNAME: the hostname
- HEADER_OSRELEASE: the kernel release number
- HEADER_ARCH: the hw architecture
- HEADER_CPUDESC: generic CPU description
- HEADER_NRCPUS: number of online/avail cpus
- HEADER_CMDLINE: perf command line
- HEADER_VERSION: perf version
- HEADER_TOPOLOGY: cpu topology
- HEADER_EVENT_DESC: full event description (attrs)
- HEADER_CPUID: easy-to-parse low level CPU identication
The small granularity for the entries is to make it easier to extend
without breaking backward compatiblity. Many entries are provided as
ASCII strings.
Perf report/script have been modified to print the basic information as
easy-to-parse ASCII strings. Extended information about CPU and NUMA
topology may be requested with the -I option.
Thanks to David Ahern for reviewing and testing the many versions of
this patch.
$ perf report --stdio
# ========
# captured on : Mon Sep 26 15:22:14 2011
# hostname : quad
# os release : 3.1.0-rc4-tip
# perf version : 3.1.0-rc4
# arch : x86_64
# nrcpus online : 4
# nrcpus avail : 4
# cpudesc : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
# cpuid : GenuineIntel,6,15,11
# total memory : 8105360 kB
# cmdline : /home/eranian/perfmon/official/tip/build/tools/perf/perf record date
# event : name = cycles, type = 0, config = 0x0, config1 = 0x0, config2 = 0x0, excl_usr = 0, excl_kern = 0, id = { 29, 30, 31,
# HEADER_CPU_TOPOLOGY info available, use -I to display
# HEADER_NUMA_TOPOLOGY info available, use -I to display
# ========
#
...
$ perf report --stdio -I
# ========
# captured on : Mon Sep 26 15:22:14 2011
# hostname : quad
# os release : 3.1.0-rc4-tip
# perf version : 3.1.0-rc4
# arch : x86_64
# nrcpus online : 4
# nrcpus avail : 4
# cpudesc : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
# cpuid : GenuineIntel,6,15,11
# total memory : 8105360 kB
# cmdline : /home/eranian/perfmon/official/tip/build/tools/perf/perf record date
# event : name = cycles, type = 0, config = 0x0, config1 = 0x0, config2 = 0x0, excl_usr = 0, excl_kern = 0, id = { 29, 30, 31,
# sibling cores : 0-3
# sibling threads : 0
# sibling threads : 1
# sibling threads : 2
# sibling threads : 3
# node0 meminfo : total = 8320608 kB, free = 7571024 kB
# node0 cpu list : 0-3
# ========
#
...
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/20110930134040.GA5575@quad
Signed-off-by: Stephane Eranian <eranian@google.com>
[ committer notes: Use --show-info in the tools as was in the docs, rename
perf_header_fprintf_info to perf_file_section__fprintf_info, fixup
conflict with f69b64f7 "perf: Support setting the disassembler style" ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-09-30 13:40:40 +00:00
|
|
|
|
|
|
|
HEADER_HOSTNAME,
|
|
|
|
HEADER_OSRELEASE,
|
|
|
|
HEADER_VERSION,
|
|
|
|
HEADER_ARCH,
|
|
|
|
HEADER_NRCPUS,
|
|
|
|
HEADER_CPUDESC,
|
|
|
|
HEADER_CPUID,
|
|
|
|
HEADER_TOTAL_MEM,
|
|
|
|
HEADER_CMDLINE,
|
|
|
|
HEADER_EVENT_DESC,
|
|
|
|
HEADER_CPU_TOPOLOGY,
|
|
|
|
HEADER_NUMA_TOPOLOGY,
|
2012-03-08 22:47:46 +00:00
|
|
|
HEADER_BRANCH_STACK,
|
2012-08-16 19:10:24 +00:00
|
|
|
HEADER_PMU_MAPPINGS,
|
2013-01-22 09:09:31 +00:00
|
|
|
HEADER_GROUP_DESC,
|
2015-04-09 15:53:41 +00:00
|
|
|
HEADER_AUXTRACE,
|
2015-10-25 14:51:43 +00:00
|
|
|
HEADER_STAT,
|
2016-02-16 15:01:43 +00:00
|
|
|
HEADER_CACHE,
|
perf header: Add infrastructure to record first and last sample time
perf report/script/... have a --time option to limit the time range of
output. That's very useful to slice large traces, e.g. when processing
the output of perf script for some analysis.
But right now --time only supports absolute time. Also there is no fast
way to get the start/end times of a given trace except for looking at
it. This makes it hard to e.g. only decode the first half of the trace,
which is useful for parallelization of scripts
Another problem is that perf records are variable size and there is no
synchronization mechanism. So the only way to find the last sample
reliably would be to walk all samples. But we want to avoid that in perf
report/... because it is already quite expensive. That is why storing
the first sample time and last sample time in perf record is better.
This patch creates a new header feature type HEADER_SAMPLE_TIME and
related ops. Save the first sample time and the last sample time to the
feature section in perf file header. That will be done when, for
instance, processing build-ids, where we already have to process all
samples to create the build-id table, take advantage of that to further
amortize that processing by storing HEADER_SAMPLE_TIME to make 'perf
report/script' faster when using --time.
Committer testing:
After this patch is applied the header is written with zeroes, we need
the next patch, for "perf record" to actually write the timestamps:
# perf report -D | grep PERF_RECORD_SAMPLE\(
22501155244406 0x44f0 [0x28]: PERF_RECORD_SAMPLE(IP, 0x4001): 25016/25016: 0xffffffffa21be8c5 period: 1 addr: 0
<SNIP>
22501155793625 0x4a30 [0x28]: PERF_RECORD_SAMPLE(IP, 0x4001): 25016/25016: 0xffffffffa21ffd50 period: 2828043 addr: 0
# perf report --header | grep "time of "
# time of first sample : 0.000000
# time of last sample : 0.000000
#
Changelog:
v7: 1. Rebase to latest perf/core branch.
2. Add following clarification in patch description according to
Arnaldo's suggestion.
"That will be done when, for instance, processing build-ids,
where we already have to process all samples to create the
build-id table, take advantage of that to further amortize
that processing by storing HEADER_SAMPLE_TIME to make
'perf report/script' faster when using --time."
v4: Use perf script time style for timestamp printing. Also add with
the printing of sample duration.
v3: Remove the definitions of first_sample_time/last_sample_time from
perf_session. Just define them in perf_evlist
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1512738826-2628-2-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-12-08 13:13:41 +00:00
|
|
|
HEADER_SAMPLE_TIME,
|
2018-03-07 15:50:08 +00:00
|
|
|
HEADER_MEM_TOPOLOGY,
|
perf record: Encode -k clockid frequency into Perf trace
Store -k clockid frequency into Perf trace to enable timestamps
derived metrics conversion into wall clock time on reporting stage.
Below is the example of perf report output:
tools/perf/perf record -k raw -- ../../matrix/linux/matrix.gcc
...
[ perf record: Captured and wrote 31.222 MB perf.data (818054 samples) ]
tools/perf/perf report --header
# ========
...
# event : name = cycles:ppp, , size = 112, { sample_period, sample_freq } = 4000, sample_type = IP|TID|TIME|PERIOD, disabled = 1, inherit = 1, mmap = 1, comm = 1, freq = 1, enable_on_exec = 1, task = 1, precise_ip = 3, sample_id_all = 1, exclude_guest = 1, mmap2 = 1, comm_exec = 1, use_clockid = 1, clockid = 4
...
# clockid frequency: 1000 MHz
...
# ========
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/23a4a1dc-b160-85a0-347d-40a2ed6d007b@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-10-09 14:36:24 +00:00
|
|
|
HEADER_CLOCKID,
|
2019-03-08 13:47:39 +00:00
|
|
|
HEADER_DIR_FORMAT,
|
perf bpf: Save bpf_prog_info information as headers to perf.data
This patch enables perf-record to save bpf_prog_info information as
headers to perf.data. A new header type HEADER_BPF_PROG_INFO is
introduced for this data.
Committer testing:
As root, being on the kernel sources top level directory, run:
# perf trace -e tools/perf/examples/bpf/augmented_raw_syscalls.c -e *msg
Just to compile and load a BPF program that attaches to the
raw_syscalls:sys_{enter,exit} tracepoints to trace the syscalls ending
in "msg" (recvmsg, sendmsg, recvmmsg, sendmmsg, etc).
Then do a systemwide perf record session for a few seconds:
# perf record -a sleep 2s
Then look at:
# perf report --header-only | grep -i bpf
# bpf_prog_info of id 13
# bpf_prog_info of id 14
# bpf_prog_info of id 15
# bpf_prog_info of id 16
# bpf_prog_info of id 17
# bpf_prog_info of id 18
# bpf_prog_info of id 21
# bpf_prog_info of id 22
# bpf_prog_info of id 208
# bpf_prog_info of id 209
#
We need to show more info about these programs, like bpftool does for
the ones running on the system, i.e. 'perf record/perf report' become a
way of saving the BPF state in a machine to then analyse on another,
together with all the other information that is already saved in the
perf.data header:
# perf report --header-only
# ========
# captured on : Tue Mar 12 11:42:13 2019
# header version : 1
# data offset : 296
# data size : 16294184
# feat offset : 16294480
# hostname : quaco
# os release : 5.0.0+
# perf version : 5.0.gd783c8
# arch : x86_64
# nrcpus online : 8
# nrcpus avail : 8
# cpudesc : Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz
# cpuid : GenuineIntel,6,142,10
# total memory : 24555720 kB
# cmdline : /home/acme/bin/perf (deleted) record -a
# event : name = cycles:ppp, , id = { 3190123, 3190124, 3190125, 3190126, 3190127, 3190128, 3190129, 3190130 }, size = 112, { sample_period, sample_freq } = 4000, sample_type = IP|TID|TIME|CPU|PERIOD, read_format = ID, disabled = 1, inherit = 1, mmap = 1, comm = 1, freq = 1, task = 1, precise_ip = 3, sample_id_all = 1, exclude_guest = 1, mmap2 = 1, comm_exec = 1
# CPU_TOPOLOGY info available, use -I to display
# NUMA_TOPOLOGY info available, use -I to display
# pmu mappings: intel_pt = 8, software = 1, power = 11, uprobe = 7, uncore_imc = 12, cpu = 4, cstate_core = 18, uncore_cbox_2 = 15, breakpoint = 5, uncore_cbox_0 = 13, tracepoint = 2, cstate_pkg = 19, uncore_arb = 17, kprobe = 6, i915 = 10, msr = 9, uncore_cbox_3 = 16, uncore_cbox_1 = 14
# CACHE info available, use -I to display
# time of first sample : 116392.441701
# time of last sample : 116400.932584
# sample duration : 8490.883 ms
# MEM_TOPOLOGY info available, use -I to display
# bpf_prog_info of id 13
# bpf_prog_info of id 14
# bpf_prog_info of id 15
# bpf_prog_info of id 16
# bpf_prog_info of id 17
# bpf_prog_info of id 18
# bpf_prog_info of id 21
# bpf_prog_info of id 22
# bpf_prog_info of id 208
# bpf_prog_info of id 209
# missing features: TRACING_DATA BRANCH_STACK GROUP_DESC AUXTRACE STAT CLOCKID DIR_FORMAT
# ========
#
Committer notes:
We can't use the libbpf unconditionally, as the build may have been with
NO_LIBBPF, when we end up with linking errors, so provide dummy
{process,write}_bpf_prog_info() wrapped by HAVE_LIBBPF_SUPPORT for that
case.
Printing are not affected by this, so can continue as is.
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20190312053051.2690567-8-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-12 05:30:43 +00:00
|
|
|
HEADER_BPF_PROG_INFO,
|
perf bpf: Save BTF information as headers to perf.data
This patch enables 'perf record' to save BTF information as headers to
perf.data.
A new header type HEADER_BPF_BTF is introduced for this data.
Committer testing:
As root, being on the kernel sources top level directory, run:
# perf trace -e tools/perf/examples/bpf/augmented_raw_syscalls.c -e *msg
Just to compile and load a BPF program that attaches to the
raw_syscalls:sys_{enter,exit} tracepoints to trace the syscalls ending
in "msg" (recvmsg, sendmsg, recvmmsg, sendmmsg, etc).
Make sure you have a recent enough clang, say version 9, to get the
BTF ELF sections needed for this testing:
# clang --version | head -1
clang version 9.0.0 (https://git.llvm.org/git/clang.git/ 7906282d3afec5dfdc2b27943fd6c0309086c507) (https://git.llvm.org/git/llvm.git/ a1b5de1ff8ae8bc79dc8e86e1f82565229bd0500)
# readelf -SW tools/perf/examples/bpf/augmented_raw_syscalls.o | grep BTF
[22] .BTF PROGBITS 0000000000000000 000ede 000b0e 00 0 0 1
[23] .BTF.ext PROGBITS 0000000000000000 0019ec 0002a0 00 0 0 1
[24] .rel.BTF.ext REL 0000000000000000 002fa8 000270 10 30 23 8
Then do a systemwide perf record session for a few seconds:
# perf record -a sleep 2s
Then look at:
# perf report --header-only | grep b[pt]f
# event : name = cycles:ppp, , id = { 1116204, 1116205, 1116206, 1116207, 1116208, 1116209, 1116210, 1116211 }, size = 112, { sample_period, sample_freq } = 4000, sample_type = IP|TID|TIME|PERIOD, read_format = ID, disabled = 1, inherit = 1, mmap = 1, comm = 1, freq = 1, enable_on_exec = 1, task = 1, precise_ip = 3, sample_id_all = 1, exclude_guest = 1, mmap2 = 1, comm_exec = 1, ksymbol = 1, bpf_event = 1
# bpf_prog_info of id 13
# bpf_prog_info of id 14
# bpf_prog_info of id 15
# bpf_prog_info of id 16
# bpf_prog_info of id 17
# bpf_prog_info of id 18
# bpf_prog_info of id 21
# bpf_prog_info of id 22
# bpf_prog_info of id 51
# bpf_prog_info of id 52
# btf info of id 8
#
We need to show more info about these BPF and BTF entries , but that can
be done later.
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20190312053051.2690567-10-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-12 05:30:45 +00:00
|
|
|
HEADER_BPF_BTF,
|
2019-03-18 17:41:33 +00:00
|
|
|
HEADER_COMPRESSED,
|
2009-11-16 18:32:43 +00:00
|
|
|
HEADER_LAST_FEATURE,
|
2011-12-07 09:02:57 +00:00
|
|
|
HEADER_FEAT_BITS = 256,
|
2009-11-16 18:32:43 +00:00
|
|
|
};
|
2009-10-17 15:12:34 +00:00
|
|
|
|
2013-07-17 17:49:47 +00:00
|
|
|
enum perf_header_version {
|
|
|
|
PERF_HEADER_VERSION_1,
|
|
|
|
PERF_HEADER_VERSION_2,
|
|
|
|
};
|
|
|
|
|
2009-11-16 18:32:43 +00:00
|
|
|
struct perf_file_section {
|
|
|
|
u64 offset;
|
|
|
|
u64 size;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct perf_file_header {
|
|
|
|
u64 magic;
|
|
|
|
u64 size;
|
|
|
|
u64 attr_size;
|
|
|
|
struct perf_file_section attrs;
|
|
|
|
struct perf_file_section data;
|
2013-07-11 15:28:31 +00:00
|
|
|
/* event_types is ignored */
|
2009-11-16 18:32:43 +00:00
|
|
|
struct perf_file_section event_types;
|
|
|
|
DECLARE_BITMAP(adds_features, HEADER_FEAT_BITS);
|
|
|
|
};
|
|
|
|
|
2010-04-02 04:59:15 +00:00
|
|
|
struct perf_pipe_file_header {
|
|
|
|
u64 magic;
|
|
|
|
u64 size;
|
|
|
|
};
|
|
|
|
|
2009-11-16 18:32:43 +00:00
|
|
|
struct perf_header;
|
|
|
|
|
2011-03-09 11:13:19 +00:00
|
|
|
int perf_file_header__read(struct perf_file_header *header,
|
2009-11-16 18:32:43 +00:00
|
|
|
struct perf_header *ph, int fd);
|
|
|
|
|
2009-06-25 15:05:54 +00:00
|
|
|
struct perf_header {
|
2013-07-17 17:49:47 +00:00
|
|
|
enum perf_header_version version;
|
|
|
|
bool needs_swap;
|
|
|
|
u64 data_offset;
|
|
|
|
u64 data_size;
|
|
|
|
u64 feat_offset;
|
2009-10-17 15:57:18 +00:00
|
|
|
DECLARE_BITMAP(adds_features, HEADER_FEAT_BITS);
|
2015-08-28 09:48:04 +00:00
|
|
|
struct perf_env env;
|
2009-06-25 15:05:54 +00:00
|
|
|
};
|
|
|
|
|
2019-09-18 19:08:52 +00:00
|
|
|
struct feat_fd {
|
|
|
|
struct perf_header *ph;
|
|
|
|
int fd;
|
|
|
|
void *buf; /* Either buf != NULL or fd >= 0 */
|
|
|
|
ssize_t offset;
|
|
|
|
size_t size;
|
|
|
|
struct evsel *events;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct perf_header_feature_ops {
|
|
|
|
int (*write)(struct feat_fd *ff, struct evlist *evlist);
|
|
|
|
void (*print)(struct feat_fd *ff, FILE *fp);
|
|
|
|
int (*process)(struct feat_fd *ff, void *data);
|
|
|
|
const char *name;
|
|
|
|
bool full_only;
|
|
|
|
bool synthesize;
|
|
|
|
};
|
|
|
|
|
2019-07-21 11:23:52 +00:00
|
|
|
struct evlist;
|
2011-11-25 10:19:45 +00:00
|
|
|
struct perf_session;
|
2019-09-10 15:42:52 +00:00
|
|
|
struct perf_tool;
|
|
|
|
union perf_event;
|
2011-01-11 22:56:53 +00:00
|
|
|
|
2013-07-17 17:49:41 +00:00
|
|
|
int perf_session__read_header(struct perf_session *session);
|
2011-03-10 14:15:54 +00:00
|
|
|
int perf_session__write_header(struct perf_session *session,
|
2019-07-21 11:23:52 +00:00
|
|
|
struct evlist *evlist,
|
2011-03-10 14:15:54 +00:00
|
|
|
int fd, bool at_exit);
|
2010-04-02 04:59:15 +00:00
|
|
|
int perf_header__write_pipe(int fd);
|
2009-06-25 15:05:54 +00:00
|
|
|
|
2011-03-09 11:13:19 +00:00
|
|
|
void perf_header__set_feat(struct perf_header *header, int feat);
|
|
|
|
void perf_header__clear_feat(struct perf_header *header, int feat);
|
|
|
|
bool perf_header__has_feat(const struct perf_header *header, int feat);
|
2009-06-25 15:05:54 +00:00
|
|
|
|
perf tools: Make perf.data more self-descriptive (v8)
The goal of this patch is to include more information about the host
environment into the perf.data so it is more self-descriptive. Overtime,
profiles are captured on various machines and it becomes hard to track
what was recorded, on what machine and when.
This patch provides a way to solve this by extending the perf.data file
with basic information about the host machine. To add those extensions,
we leverage the feature bits capabilities of the perf.data format. The
change is backward compatible with existing perf.data files.
We define the following useful new extensions:
- HEADER_HOSTNAME: the hostname
- HEADER_OSRELEASE: the kernel release number
- HEADER_ARCH: the hw architecture
- HEADER_CPUDESC: generic CPU description
- HEADER_NRCPUS: number of online/avail cpus
- HEADER_CMDLINE: perf command line
- HEADER_VERSION: perf version
- HEADER_TOPOLOGY: cpu topology
- HEADER_EVENT_DESC: full event description (attrs)
- HEADER_CPUID: easy-to-parse low level CPU identication
The small granularity for the entries is to make it easier to extend
without breaking backward compatiblity. Many entries are provided as
ASCII strings.
Perf report/script have been modified to print the basic information as
easy-to-parse ASCII strings. Extended information about CPU and NUMA
topology may be requested with the -I option.
Thanks to David Ahern for reviewing and testing the many versions of
this patch.
$ perf report --stdio
# ========
# captured on : Mon Sep 26 15:22:14 2011
# hostname : quad
# os release : 3.1.0-rc4-tip
# perf version : 3.1.0-rc4
# arch : x86_64
# nrcpus online : 4
# nrcpus avail : 4
# cpudesc : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
# cpuid : GenuineIntel,6,15,11
# total memory : 8105360 kB
# cmdline : /home/eranian/perfmon/official/tip/build/tools/perf/perf record date
# event : name = cycles, type = 0, config = 0x0, config1 = 0x0, config2 = 0x0, excl_usr = 0, excl_kern = 0, id = { 29, 30, 31,
# HEADER_CPU_TOPOLOGY info available, use -I to display
# HEADER_NUMA_TOPOLOGY info available, use -I to display
# ========
#
...
$ perf report --stdio -I
# ========
# captured on : Mon Sep 26 15:22:14 2011
# hostname : quad
# os release : 3.1.0-rc4-tip
# perf version : 3.1.0-rc4
# arch : x86_64
# nrcpus online : 4
# nrcpus avail : 4
# cpudesc : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
# cpuid : GenuineIntel,6,15,11
# total memory : 8105360 kB
# cmdline : /home/eranian/perfmon/official/tip/build/tools/perf/perf record date
# event : name = cycles, type = 0, config = 0x0, config1 = 0x0, config2 = 0x0, excl_usr = 0, excl_kern = 0, id = { 29, 30, 31,
# sibling cores : 0-3
# sibling threads : 0
# sibling threads : 1
# sibling threads : 2
# sibling threads : 3
# node0 meminfo : total = 8320608 kB, free = 7571024 kB
# node0 cpu list : 0-3
# ========
#
...
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/20110930134040.GA5575@quad
Signed-off-by: Stephane Eranian <eranian@google.com>
[ committer notes: Use --show-info in the tools as was in the docs, rename
perf_header_fprintf_info to perf_file_section__fprintf_info, fixup
conflict with f69b64f7 "perf: Support setting the disassembler style" ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-09-30 13:40:40 +00:00
|
|
|
int perf_header__set_cmdline(int argc, const char **argv);
|
|
|
|
|
2011-03-09 11:13:19 +00:00
|
|
|
int perf_header__process_sections(struct perf_header *header, int fd,
|
perf tools: Make perf.data more self-descriptive (v8)
The goal of this patch is to include more information about the host
environment into the perf.data so it is more self-descriptive. Overtime,
profiles are captured on various machines and it becomes hard to track
what was recorded, on what machine and when.
This patch provides a way to solve this by extending the perf.data file
with basic information about the host machine. To add those extensions,
we leverage the feature bits capabilities of the perf.data format. The
change is backward compatible with existing perf.data files.
We define the following useful new extensions:
- HEADER_HOSTNAME: the hostname
- HEADER_OSRELEASE: the kernel release number
- HEADER_ARCH: the hw architecture
- HEADER_CPUDESC: generic CPU description
- HEADER_NRCPUS: number of online/avail cpus
- HEADER_CMDLINE: perf command line
- HEADER_VERSION: perf version
- HEADER_TOPOLOGY: cpu topology
- HEADER_EVENT_DESC: full event description (attrs)
- HEADER_CPUID: easy-to-parse low level CPU identication
The small granularity for the entries is to make it easier to extend
without breaking backward compatiblity. Many entries are provided as
ASCII strings.
Perf report/script have been modified to print the basic information as
easy-to-parse ASCII strings. Extended information about CPU and NUMA
topology may be requested with the -I option.
Thanks to David Ahern for reviewing and testing the many versions of
this patch.
$ perf report --stdio
# ========
# captured on : Mon Sep 26 15:22:14 2011
# hostname : quad
# os release : 3.1.0-rc4-tip
# perf version : 3.1.0-rc4
# arch : x86_64
# nrcpus online : 4
# nrcpus avail : 4
# cpudesc : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
# cpuid : GenuineIntel,6,15,11
# total memory : 8105360 kB
# cmdline : /home/eranian/perfmon/official/tip/build/tools/perf/perf record date
# event : name = cycles, type = 0, config = 0x0, config1 = 0x0, config2 = 0x0, excl_usr = 0, excl_kern = 0, id = { 29, 30, 31,
# HEADER_CPU_TOPOLOGY info available, use -I to display
# HEADER_NUMA_TOPOLOGY info available, use -I to display
# ========
#
...
$ perf report --stdio -I
# ========
# captured on : Mon Sep 26 15:22:14 2011
# hostname : quad
# os release : 3.1.0-rc4-tip
# perf version : 3.1.0-rc4
# arch : x86_64
# nrcpus online : 4
# nrcpus avail : 4
# cpudesc : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
# cpuid : GenuineIntel,6,15,11
# total memory : 8105360 kB
# cmdline : /home/eranian/perfmon/official/tip/build/tools/perf/perf record date
# event : name = cycles, type = 0, config = 0x0, config1 = 0x0, config2 = 0x0, excl_usr = 0, excl_kern = 0, id = { 29, 30, 31,
# sibling cores : 0-3
# sibling threads : 0
# sibling threads : 1
# sibling threads : 2
# sibling threads : 3
# node0 meminfo : total = 8320608 kB, free = 7571024 kB
# node0 cpu list : 0-3
# ========
#
...
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/20110930134040.GA5575@quad
Signed-off-by: Stephane Eranian <eranian@google.com>
[ committer notes: Use --show-info in the tools as was in the docs, rename
perf_header_fprintf_info to perf_file_section__fprintf_info, fixup
conflict with f69b64f7 "perf: Support setting the disassembler style" ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-09-30 13:40:40 +00:00
|
|
|
void *data,
|
2011-03-09 11:13:19 +00:00
|
|
|
int (*process)(struct perf_file_section *section,
|
perf tools: Make perf.data more self-descriptive (v8)
The goal of this patch is to include more information about the host
environment into the perf.data so it is more self-descriptive. Overtime,
profiles are captured on various machines and it becomes hard to track
what was recorded, on what machine and when.
This patch provides a way to solve this by extending the perf.data file
with basic information about the host machine. To add those extensions,
we leverage the feature bits capabilities of the perf.data format. The
change is backward compatible with existing perf.data files.
We define the following useful new extensions:
- HEADER_HOSTNAME: the hostname
- HEADER_OSRELEASE: the kernel release number
- HEADER_ARCH: the hw architecture
- HEADER_CPUDESC: generic CPU description
- HEADER_NRCPUS: number of online/avail cpus
- HEADER_CMDLINE: perf command line
- HEADER_VERSION: perf version
- HEADER_TOPOLOGY: cpu topology
- HEADER_EVENT_DESC: full event description (attrs)
- HEADER_CPUID: easy-to-parse low level CPU identication
The small granularity for the entries is to make it easier to extend
without breaking backward compatiblity. Many entries are provided as
ASCII strings.
Perf report/script have been modified to print the basic information as
easy-to-parse ASCII strings. Extended information about CPU and NUMA
topology may be requested with the -I option.
Thanks to David Ahern for reviewing and testing the many versions of
this patch.
$ perf report --stdio
# ========
# captured on : Mon Sep 26 15:22:14 2011
# hostname : quad
# os release : 3.1.0-rc4-tip
# perf version : 3.1.0-rc4
# arch : x86_64
# nrcpus online : 4
# nrcpus avail : 4
# cpudesc : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
# cpuid : GenuineIntel,6,15,11
# total memory : 8105360 kB
# cmdline : /home/eranian/perfmon/official/tip/build/tools/perf/perf record date
# event : name = cycles, type = 0, config = 0x0, config1 = 0x0, config2 = 0x0, excl_usr = 0, excl_kern = 0, id = { 29, 30, 31,
# HEADER_CPU_TOPOLOGY info available, use -I to display
# HEADER_NUMA_TOPOLOGY info available, use -I to display
# ========
#
...
$ perf report --stdio -I
# ========
# captured on : Mon Sep 26 15:22:14 2011
# hostname : quad
# os release : 3.1.0-rc4-tip
# perf version : 3.1.0-rc4
# arch : x86_64
# nrcpus online : 4
# nrcpus avail : 4
# cpudesc : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
# cpuid : GenuineIntel,6,15,11
# total memory : 8105360 kB
# cmdline : /home/eranian/perfmon/official/tip/build/tools/perf/perf record date
# event : name = cycles, type = 0, config = 0x0, config1 = 0x0, config2 = 0x0, excl_usr = 0, excl_kern = 0, id = { 29, 30, 31,
# sibling cores : 0-3
# sibling threads : 0
# sibling threads : 1
# sibling threads : 2
# sibling threads : 3
# node0 meminfo : total = 8320608 kB, free = 7571024 kB
# node0 cpu list : 0-3
# ========
#
...
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/20110930134040.GA5575@quad
Signed-off-by: Stephane Eranian <eranian@google.com>
[ committer notes: Use --show-info in the tools as was in the docs, rename
perf_header_fprintf_info to perf_file_section__fprintf_info, fixup
conflict with f69b64f7 "perf: Support setting the disassembler style" ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-09-30 13:40:40 +00:00
|
|
|
struct perf_header *ph,
|
|
|
|
int feat, int fd, void *data));
|
|
|
|
|
|
|
|
int perf_header__fprintf_info(struct perf_session *s, FILE *fp, bool full);
|
2009-11-16 18:32:43 +00:00
|
|
|
|
2018-09-13 12:54:03 +00:00
|
|
|
int perf_event__process_feature(struct perf_session *session,
|
|
|
|
union perf_event *event);
|
2013-07-04 13:20:21 +00:00
|
|
|
int perf_event__process_attr(struct perf_tool *tool, union perf_event *event,
|
2019-07-21 11:23:52 +00:00
|
|
|
struct evlist **pevlist);
|
2016-03-22 16:09:37 +00:00
|
|
|
int perf_event__process_event_update(struct perf_tool *tool,
|
2015-10-25 14:51:36 +00:00
|
|
|
union perf_event *event,
|
2019-07-21 11:23:52 +00:00
|
|
|
struct evlist **pevlist);
|
2015-10-25 14:51:41 +00:00
|
|
|
size_t perf_event__fprintf_event_update(union perf_event *event, FILE *fp);
|
2018-09-13 12:54:03 +00:00
|
|
|
int perf_event__process_tracing_data(struct perf_session *session,
|
|
|
|
union perf_event *event);
|
|
|
|
int perf_event__process_build_id(struct perf_session *session,
|
|
|
|
union perf_event *event);
|
2012-10-30 03:56:07 +00:00
|
|
|
bool is_perf_magic(u64 magic);
|
perf tools: Make perf.data more self-descriptive (v8)
The goal of this patch is to include more information about the host
environment into the perf.data so it is more self-descriptive. Overtime,
profiles are captured on various machines and it becomes hard to track
what was recorded, on what machine and when.
This patch provides a way to solve this by extending the perf.data file
with basic information about the host machine. To add those extensions,
we leverage the feature bits capabilities of the perf.data format. The
change is backward compatible with existing perf.data files.
We define the following useful new extensions:
- HEADER_HOSTNAME: the hostname
- HEADER_OSRELEASE: the kernel release number
- HEADER_ARCH: the hw architecture
- HEADER_CPUDESC: generic CPU description
- HEADER_NRCPUS: number of online/avail cpus
- HEADER_CMDLINE: perf command line
- HEADER_VERSION: perf version
- HEADER_TOPOLOGY: cpu topology
- HEADER_EVENT_DESC: full event description (attrs)
- HEADER_CPUID: easy-to-parse low level CPU identication
The small granularity for the entries is to make it easier to extend
without breaking backward compatiblity. Many entries are provided as
ASCII strings.
Perf report/script have been modified to print the basic information as
easy-to-parse ASCII strings. Extended information about CPU and NUMA
topology may be requested with the -I option.
Thanks to David Ahern for reviewing and testing the many versions of
this patch.
$ perf report --stdio
# ========
# captured on : Mon Sep 26 15:22:14 2011
# hostname : quad
# os release : 3.1.0-rc4-tip
# perf version : 3.1.0-rc4
# arch : x86_64
# nrcpus online : 4
# nrcpus avail : 4
# cpudesc : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
# cpuid : GenuineIntel,6,15,11
# total memory : 8105360 kB
# cmdline : /home/eranian/perfmon/official/tip/build/tools/perf/perf record date
# event : name = cycles, type = 0, config = 0x0, config1 = 0x0, config2 = 0x0, excl_usr = 0, excl_kern = 0, id = { 29, 30, 31,
# HEADER_CPU_TOPOLOGY info available, use -I to display
# HEADER_NUMA_TOPOLOGY info available, use -I to display
# ========
#
...
$ perf report --stdio -I
# ========
# captured on : Mon Sep 26 15:22:14 2011
# hostname : quad
# os release : 3.1.0-rc4-tip
# perf version : 3.1.0-rc4
# arch : x86_64
# nrcpus online : 4
# nrcpus avail : 4
# cpudesc : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
# cpuid : GenuineIntel,6,15,11
# total memory : 8105360 kB
# cmdline : /home/eranian/perfmon/official/tip/build/tools/perf/perf record date
# event : name = cycles, type = 0, config = 0x0, config1 = 0x0, config2 = 0x0, excl_usr = 0, excl_kern = 0, id = { 29, 30, 31,
# sibling cores : 0-3
# sibling threads : 0
# sibling threads : 1
# sibling threads : 2
# sibling threads : 3
# node0 meminfo : total = 8320608 kB, free = 7571024 kB
# node0 cpu list : 0-3
# ========
#
...
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/20110930134040.GA5575@quad
Signed-off-by: Stephane Eranian <eranian@google.com>
[ committer notes: Use --show-info in the tools as was in the docs, rename
perf_header_fprintf_info to perf_file_section__fprintf_info, fixup
conflict with f69b64f7 "perf: Support setting the disassembler style" ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-09-30 13:40:40 +00:00
|
|
|
|
2014-11-04 01:14:30 +00:00
|
|
|
#define NAME_ALIGN 64
|
|
|
|
|
2017-07-18 04:25:39 +00:00
|
|
|
struct feat_fd;
|
2017-07-18 04:25:38 +00:00
|
|
|
|
2017-07-18 04:25:39 +00:00
|
|
|
int do_write(struct feat_fd *fd, const void *buf, size_t size);
|
|
|
|
|
|
|
|
int write_padded(struct feat_fd *fd, const void *bf,
|
|
|
|
size_t count, size_t count_aligned);
|
2014-07-22 13:17:23 +00:00
|
|
|
|
perf tools: Make perf.data more self-descriptive (v8)
The goal of this patch is to include more information about the host
environment into the perf.data so it is more self-descriptive. Overtime,
profiles are captured on various machines and it becomes hard to track
what was recorded, on what machine and when.
This patch provides a way to solve this by extending the perf.data file
with basic information about the host machine. To add those extensions,
we leverage the feature bits capabilities of the perf.data format. The
change is backward compatible with existing perf.data files.
We define the following useful new extensions:
- HEADER_HOSTNAME: the hostname
- HEADER_OSRELEASE: the kernel release number
- HEADER_ARCH: the hw architecture
- HEADER_CPUDESC: generic CPU description
- HEADER_NRCPUS: number of online/avail cpus
- HEADER_CMDLINE: perf command line
- HEADER_VERSION: perf version
- HEADER_TOPOLOGY: cpu topology
- HEADER_EVENT_DESC: full event description (attrs)
- HEADER_CPUID: easy-to-parse low level CPU identication
The small granularity for the entries is to make it easier to extend
without breaking backward compatiblity. Many entries are provided as
ASCII strings.
Perf report/script have been modified to print the basic information as
easy-to-parse ASCII strings. Extended information about CPU and NUMA
topology may be requested with the -I option.
Thanks to David Ahern for reviewing and testing the many versions of
this patch.
$ perf report --stdio
# ========
# captured on : Mon Sep 26 15:22:14 2011
# hostname : quad
# os release : 3.1.0-rc4-tip
# perf version : 3.1.0-rc4
# arch : x86_64
# nrcpus online : 4
# nrcpus avail : 4
# cpudesc : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
# cpuid : GenuineIntel,6,15,11
# total memory : 8105360 kB
# cmdline : /home/eranian/perfmon/official/tip/build/tools/perf/perf record date
# event : name = cycles, type = 0, config = 0x0, config1 = 0x0, config2 = 0x0, excl_usr = 0, excl_kern = 0, id = { 29, 30, 31,
# HEADER_CPU_TOPOLOGY info available, use -I to display
# HEADER_NUMA_TOPOLOGY info available, use -I to display
# ========
#
...
$ perf report --stdio -I
# ========
# captured on : Mon Sep 26 15:22:14 2011
# hostname : quad
# os release : 3.1.0-rc4-tip
# perf version : 3.1.0-rc4
# arch : x86_64
# nrcpus online : 4
# nrcpus avail : 4
# cpudesc : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
# cpuid : GenuineIntel,6,15,11
# total memory : 8105360 kB
# cmdline : /home/eranian/perfmon/official/tip/build/tools/perf/perf record date
# event : name = cycles, type = 0, config = 0x0, config1 = 0x0, config2 = 0x0, excl_usr = 0, excl_kern = 0, id = { 29, 30, 31,
# sibling cores : 0-3
# sibling threads : 0
# sibling threads : 1
# sibling threads : 2
# sibling threads : 3
# node0 meminfo : total = 8320608 kB, free = 7571024 kB
# node0 cpu list : 0-3
# ========
#
...
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/20110930134040.GA5575@quad
Signed-off-by: Stephane Eranian <eranian@google.com>
[ committer notes: Use --show-info in the tools as was in the docs, rename
perf_header_fprintf_info to perf_file_section__fprintf_info, fixup
conflict with f69b64f7 "perf: Support setting the disassembler style" ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-09-30 13:40:40 +00:00
|
|
|
/*
|
|
|
|
* arch specific callback
|
|
|
|
*/
|
|
|
|
int get_cpuid(char *buffer, size_t sz);
|
|
|
|
|
2017-10-16 18:32:18 +00:00
|
|
|
char *get_cpuid_str(struct perf_pmu *pmu __maybe_unused);
|
2018-02-13 15:14:18 +00:00
|
|
|
int strcmp_cpuid_str(const char *s1, const char *s2);
|
2009-09-24 16:02:18 +00:00
|
|
|
#endif /* __PERF_HEADER_H */
|