linux-stable/drivers/leds/rgb/Makefile

8 lines
304 B
Makefile
Raw Normal View History

leds: Add driver for Qualcomm LPG The Light Pulse Generator (LPG) is a PWM-block found in a wide range of PMICs from Qualcomm. These PMICs typically comes with 1-8 LPG instances, with their output being routed to various other components, such as current sinks or GPIOs. Each LPG instance can operate on fixed parameters or based on a shared lookup-table, altering the duty cycle over time. This provides the means for hardware assisted transitions of LED brightness. A typical use case for the fixed parameter mode is to drive a PWM backlight control signal, the driver therefor allows each LPG instance to be exposed to the kernel either through the LED framework or the PWM framework. A typical use case for the LED configuration is to drive RGB LEDs in smartphones etc, for which the driver supports multiple channels to be ganged up to a MULTICOLOR LED. In this configuration the pattern generators will be synchronized, to allow for multi-color patterns. The idea of modelling this as a LED driver ontop of a PWM driver was considered, but setting the properties related to patterns does not fit in the PWM API. Similarly the idea of just duplicating the lower bits in a PWM and LED driver separately was considered, but this would not allow the PWM channels and LEDs to be configured on a per-board basis. The driver implements the more complex LED interface, and provides a PWM interface on the side of that, in the same driver. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Douglas Anderson <dianders@chromium.org> Tested-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Tested-by: Marijn Suijten <marijn.suijten@somainline.org> [On the Sony Xperia Nile Discovery, SDM630] Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-03-03 21:43:00 +00:00
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_LEDS_GROUP_MULTICOLOR) += leds-group-multicolor.o
obj-$(CONFIG_LEDS_KTD202X) += leds-ktd202x.o
obj-$(CONFIG_LEDS_PWM_MULTICOLOR) += leds-pwm-multicolor.o
obj-$(CONFIG_LEDS_QCOM_LPG) += leds-qcom-lpg.o
obj-$(CONFIG_LEDS_MT6370_RGB) += leds-mt6370-rgb.o