linux-stable/drivers/dma/sprd-dma.c

1309 lines
35 KiB
C
Raw Normal View History

/*
* Copyright (C) 2017 Spreadtrum Communications Inc.
*
* SPDX-License-Identifier: GPL-2.0
*/
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/dma/sprd-dma.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_dma.h>
#include <linux/of_device.h>
#include <linux/pm_runtime.h>
#include <linux/slab.h>
#include "virt-dma.h"
#define SPRD_DMA_CHN_REG_OFFSET 0x1000
#define SPRD_DMA_CHN_REG_LENGTH 0x40
#define SPRD_DMA_MEMCPY_MIN_SIZE 64
/* DMA global registers definition */
#define SPRD_DMA_GLB_PAUSE 0x0
#define SPRD_DMA_GLB_FRAG_WAIT 0x4
#define SPRD_DMA_GLB_REQ_PEND0_EN 0x8
#define SPRD_DMA_GLB_REQ_PEND1_EN 0xc
#define SPRD_DMA_GLB_INT_RAW_STS 0x10
#define SPRD_DMA_GLB_INT_MSK_STS 0x14
#define SPRD_DMA_GLB_REQ_STS 0x18
#define SPRD_DMA_GLB_CHN_EN_STS 0x1c
#define SPRD_DMA_GLB_DEBUG_STS 0x20
#define SPRD_DMA_GLB_ARB_SEL_STS 0x24
#define SPRD_DMA_GLB_2STAGE_GRP1 0x28
#define SPRD_DMA_GLB_2STAGE_GRP2 0x2c
#define SPRD_DMA_GLB_REQ_UID(uid) (0x4 * ((uid) - 1))
#define SPRD_DMA_GLB_REQ_UID_OFFSET 0x2000
/* DMA channel registers definition */
#define SPRD_DMA_CHN_PAUSE 0x0
#define SPRD_DMA_CHN_REQ 0x4
#define SPRD_DMA_CHN_CFG 0x8
#define SPRD_DMA_CHN_INTC 0xc
#define SPRD_DMA_CHN_SRC_ADDR 0x10
#define SPRD_DMA_CHN_DES_ADDR 0x14
#define SPRD_DMA_CHN_FRG_LEN 0x18
#define SPRD_DMA_CHN_BLK_LEN 0x1c
#define SPRD_DMA_CHN_TRSC_LEN 0x20
#define SPRD_DMA_CHN_TRSF_STEP 0x24
#define SPRD_DMA_CHN_WARP_PTR 0x28
#define SPRD_DMA_CHN_WARP_TO 0x2c
#define SPRD_DMA_CHN_LLIST_PTR 0x30
#define SPRD_DMA_CHN_FRAG_STEP 0x34
#define SPRD_DMA_CHN_SRC_BLK_STEP 0x38
#define SPRD_DMA_CHN_DES_BLK_STEP 0x3c
/* SPRD_DMA_GLB_2STAGE_GRP register definition */
#define SPRD_DMA_GLB_2STAGE_EN BIT(24)
#define SPRD_DMA_GLB_CHN_INT_MASK GENMASK(23, 20)
#define SPRD_DMA_GLB_DEST_INT BIT(22)
#define SPRD_DMA_GLB_SRC_INT BIT(20)
#define SPRD_DMA_GLB_LIST_DONE_TRG BIT(19)
#define SPRD_DMA_GLB_TRANS_DONE_TRG BIT(18)
#define SPRD_DMA_GLB_BLOCK_DONE_TRG BIT(17)
#define SPRD_DMA_GLB_FRAG_DONE_TRG BIT(16)
#define SPRD_DMA_GLB_TRG_OFFSET 16
#define SPRD_DMA_GLB_DEST_CHN_MASK GENMASK(13, 8)
#define SPRD_DMA_GLB_DEST_CHN_OFFSET 8
#define SPRD_DMA_GLB_SRC_CHN_MASK GENMASK(5, 0)
/* SPRD_DMA_CHN_INTC register definition */
#define SPRD_DMA_INT_MASK GENMASK(4, 0)
#define SPRD_DMA_INT_CLR_OFFSET 24
#define SPRD_DMA_FRAG_INT_EN BIT(0)
#define SPRD_DMA_BLK_INT_EN BIT(1)
#define SPRD_DMA_TRANS_INT_EN BIT(2)
#define SPRD_DMA_LIST_INT_EN BIT(3)
#define SPRD_DMA_CFG_ERR_INT_EN BIT(4)
/* SPRD_DMA_CHN_CFG register definition */
#define SPRD_DMA_CHN_EN BIT(0)
#define SPRD_DMA_LINKLIST_EN BIT(4)
#define SPRD_DMA_WAIT_BDONE_OFFSET 24
#define SPRD_DMA_DONOT_WAIT_BDONE 1
/* SPRD_DMA_CHN_REQ register definition */
#define SPRD_DMA_REQ_EN BIT(0)
/* SPRD_DMA_CHN_PAUSE register definition */
#define SPRD_DMA_PAUSE_EN BIT(0)
#define SPRD_DMA_PAUSE_STS BIT(2)
#define SPRD_DMA_PAUSE_CNT 0x2000
/* DMA_CHN_WARP_* register definition */
#define SPRD_DMA_HIGH_ADDR_MASK GENMASK(31, 28)
#define SPRD_DMA_LOW_ADDR_MASK GENMASK(31, 0)
dmaengine: sprd: Add wrap address support for link-list mode The Spreadtrum Audio compress offload mode will use 2-stage DMA transfer to save power. That means we can request 2 dma channels, one for source channel, and another one for destination channel. Once the source channel's transaction is done, it will trigger the destination channel's transaction automatically by hardware signal. In this case, the source channel will transfer data from IRAM buffer to the DSP fifo to decoding/encoding, once IRAM buffer is empty by transferring done, the destination channel will start to transfer data from DDR buffer to IRAM buffer. Since the destination channel will use link-list mode to fill the IRAM data, and IRAM buffer is allocated by 32K, and DDR buffer is larger to 2M, that means we need lots of link-list nodes to do a cyclic transfer, instead wasting lots of link-list memory, we can use wrap address support to reduce link-list node number, which means when the transfer address reaches the wrap address, the transfer address will jump to the wrap_to address specified by wrap_to register, and only 2 link-list nodes can do a cyclic transfer to transfer data from DDR to IRAM. Thus this patch adds wrap address to support this case. [Baolin Wang changes the commit message] Signed-off-by: Eric Long <eric.long@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Link: https://lore.kernel.org/r/85a5484bc1f3dd53ce6f92700ad8b35f30a0b096.1571812029.git.baolin.wang@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-23 06:31:32 +00:00
#define SPRD_DMA_WRAP_ADDR_MASK GENMASK(27, 0)
#define SPRD_DMA_HIGH_ADDR_OFFSET 4
/* SPRD_DMA_CHN_INTC register definition */
#define SPRD_DMA_FRAG_INT_STS BIT(16)
#define SPRD_DMA_BLK_INT_STS BIT(17)
#define SPRD_DMA_TRSC_INT_STS BIT(18)
#define SPRD_DMA_LIST_INT_STS BIT(19)
#define SPRD_DMA_CFGERR_INT_STS BIT(20)
#define SPRD_DMA_CHN_INT_STS \
(SPRD_DMA_FRAG_INT_STS | SPRD_DMA_BLK_INT_STS | \
SPRD_DMA_TRSC_INT_STS | SPRD_DMA_LIST_INT_STS | \
SPRD_DMA_CFGERR_INT_STS)
/* SPRD_DMA_CHN_FRG_LEN register definition */
#define SPRD_DMA_SRC_DATAWIDTH_OFFSET 30
#define SPRD_DMA_DES_DATAWIDTH_OFFSET 28
#define SPRD_DMA_SWT_MODE_OFFSET 26
#define SPRD_DMA_REQ_MODE_OFFSET 24
#define SPRD_DMA_REQ_MODE_MASK GENMASK(1, 0)
dmaengine: sprd: Add wrap address support for link-list mode The Spreadtrum Audio compress offload mode will use 2-stage DMA transfer to save power. That means we can request 2 dma channels, one for source channel, and another one for destination channel. Once the source channel's transaction is done, it will trigger the destination channel's transaction automatically by hardware signal. In this case, the source channel will transfer data from IRAM buffer to the DSP fifo to decoding/encoding, once IRAM buffer is empty by transferring done, the destination channel will start to transfer data from DDR buffer to IRAM buffer. Since the destination channel will use link-list mode to fill the IRAM data, and IRAM buffer is allocated by 32K, and DDR buffer is larger to 2M, that means we need lots of link-list nodes to do a cyclic transfer, instead wasting lots of link-list memory, we can use wrap address support to reduce link-list node number, which means when the transfer address reaches the wrap address, the transfer address will jump to the wrap_to address specified by wrap_to register, and only 2 link-list nodes can do a cyclic transfer to transfer data from DDR to IRAM. Thus this patch adds wrap address to support this case. [Baolin Wang changes the commit message] Signed-off-by: Eric Long <eric.long@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Link: https://lore.kernel.org/r/85a5484bc1f3dd53ce6f92700ad8b35f30a0b096.1571812029.git.baolin.wang@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-23 06:31:32 +00:00
#define SPRD_DMA_WRAP_SEL_DEST BIT(23)
#define SPRD_DMA_WRAP_EN BIT(22)
#define SPRD_DMA_FIX_SEL_OFFSET 21
#define SPRD_DMA_FIX_EN_OFFSET 20
#define SPRD_DMA_LLIST_END BIT(19)
#define SPRD_DMA_FRG_LEN_MASK GENMASK(16, 0)
/* SPRD_DMA_CHN_BLK_LEN register definition */
#define SPRD_DMA_BLK_LEN_MASK GENMASK(16, 0)
/* SPRD_DMA_CHN_TRSC_LEN register definition */
#define SPRD_DMA_TRSC_LEN_MASK GENMASK(27, 0)
/* SPRD_DMA_CHN_TRSF_STEP register definition */
#define SPRD_DMA_DEST_TRSF_STEP_OFFSET 16
#define SPRD_DMA_SRC_TRSF_STEP_OFFSET 0
#define SPRD_DMA_TRSF_STEP_MASK GENMASK(15, 0)
/* SPRD DMA_SRC_BLK_STEP register definition */
#define SPRD_DMA_LLIST_HIGH_MASK GENMASK(31, 28)
#define SPRD_DMA_LLIST_HIGH_SHIFT 28
/* define DMA channel mode & trigger mode mask */
#define SPRD_DMA_CHN_MODE_MASK GENMASK(7, 0)
#define SPRD_DMA_TRG_MODE_MASK GENMASK(7, 0)
#define SPRD_DMA_INT_TYPE_MASK GENMASK(7, 0)
/* define the DMA transfer step type */
#define SPRD_DMA_NONE_STEP 0
#define SPRD_DMA_BYTE_STEP 1
#define SPRD_DMA_SHORT_STEP 2
#define SPRD_DMA_WORD_STEP 4
#define SPRD_DMA_DWORD_STEP 8
#define SPRD_DMA_SOFTWARE_UID 0
/* dma data width values */
enum sprd_dma_datawidth {
SPRD_DMA_DATAWIDTH_1_BYTE,
SPRD_DMA_DATAWIDTH_2_BYTES,
SPRD_DMA_DATAWIDTH_4_BYTES,
SPRD_DMA_DATAWIDTH_8_BYTES,
};
/* dma channel hardware configuration */
struct sprd_dma_chn_hw {
u32 pause;
u32 req;
u32 cfg;
u32 intc;
u32 src_addr;
u32 des_addr;
u32 frg_len;
u32 blk_len;
u32 trsc_len;
u32 trsf_step;
u32 wrap_ptr;
u32 wrap_to;
u32 llist_ptr;
u32 frg_step;
u32 src_blk_step;
u32 des_blk_step;
};
/* dma request description */
struct sprd_dma_desc {
struct virt_dma_desc vd;
struct sprd_dma_chn_hw chn_hw;
enum dma_transfer_direction dir;
};
/* dma channel description */
struct sprd_dma_chn {
struct virt_dma_chan vc;
void __iomem *chn_base;
struct sprd_dma_linklist linklist;
struct dma_slave_config slave_cfg;
u32 chn_num;
u32 dev_id;
enum sprd_dma_chn_mode chn_mode;
enum sprd_dma_trg_mode trg_mode;
enum sprd_dma_int_type int_type;
struct sprd_dma_desc *cur_desc;
};
/* SPRD dma device */
struct sprd_dma_dev {
struct dma_device dma_dev;
void __iomem *glb_base;
struct clk *clk;
struct clk *ashb_clk;
int irq;
u32 total_chns;
struct sprd_dma_chn channels[];
};
static void sprd_dma_free_desc(struct virt_dma_desc *vd);
static bool sprd_dma_filter_fn(struct dma_chan *chan, void *param);
static struct of_dma_filter_info sprd_dma_info = {
.filter_fn = sprd_dma_filter_fn,
};
static inline struct sprd_dma_chn *to_sprd_dma_chan(struct dma_chan *c)
{
return container_of(c, struct sprd_dma_chn, vc.chan);
}
static inline struct sprd_dma_dev *to_sprd_dma_dev(struct dma_chan *c)
{
struct sprd_dma_chn *schan = to_sprd_dma_chan(c);
return container_of(schan, struct sprd_dma_dev, channels[c->chan_id]);
}
static inline struct sprd_dma_desc *to_sprd_dma_desc(struct virt_dma_desc *vd)
{
return container_of(vd, struct sprd_dma_desc, vd);
}
static void sprd_dma_glb_update(struct sprd_dma_dev *sdev, u32 reg,
u32 mask, u32 val)
{
u32 orig = readl(sdev->glb_base + reg);
u32 tmp;
tmp = (orig & ~mask) | val;
writel(tmp, sdev->glb_base + reg);
}
static void sprd_dma_chn_update(struct sprd_dma_chn *schan, u32 reg,
u32 mask, u32 val)
{
u32 orig = readl(schan->chn_base + reg);
u32 tmp;
tmp = (orig & ~mask) | val;
writel(tmp, schan->chn_base + reg);
}
static int sprd_dma_enable(struct sprd_dma_dev *sdev)
{
int ret;
ret = clk_prepare_enable(sdev->clk);
if (ret)
return ret;
/*
* The ashb_clk is optional and only for AGCP DMA controller, so we
* need add one condition to check if the ashb_clk need enable.
*/
if (!IS_ERR(sdev->ashb_clk))
ret = clk_prepare_enable(sdev->ashb_clk);
return ret;
}
static void sprd_dma_disable(struct sprd_dma_dev *sdev)
{
clk_disable_unprepare(sdev->clk);
/*
* Need to check if we need disable the optional ashb_clk for AGCP DMA.
*/
if (!IS_ERR(sdev->ashb_clk))
clk_disable_unprepare(sdev->ashb_clk);
}
static void sprd_dma_set_uid(struct sprd_dma_chn *schan)
{
struct sprd_dma_dev *sdev = to_sprd_dma_dev(&schan->vc.chan);
u32 dev_id = schan->dev_id;
if (dev_id != SPRD_DMA_SOFTWARE_UID) {
u32 uid_offset = SPRD_DMA_GLB_REQ_UID_OFFSET +
SPRD_DMA_GLB_REQ_UID(dev_id);
writel(schan->chn_num + 1, sdev->glb_base + uid_offset);
}
}
static void sprd_dma_unset_uid(struct sprd_dma_chn *schan)
{
struct sprd_dma_dev *sdev = to_sprd_dma_dev(&schan->vc.chan);
u32 dev_id = schan->dev_id;
if (dev_id != SPRD_DMA_SOFTWARE_UID) {
u32 uid_offset = SPRD_DMA_GLB_REQ_UID_OFFSET +
SPRD_DMA_GLB_REQ_UID(dev_id);
writel(0, sdev->glb_base + uid_offset);
}
}
static void sprd_dma_clear_int(struct sprd_dma_chn *schan)
{
sprd_dma_chn_update(schan, SPRD_DMA_CHN_INTC,
SPRD_DMA_INT_MASK << SPRD_DMA_INT_CLR_OFFSET,
SPRD_DMA_INT_MASK << SPRD_DMA_INT_CLR_OFFSET);
}
static void sprd_dma_enable_chn(struct sprd_dma_chn *schan)
{
sprd_dma_chn_update(schan, SPRD_DMA_CHN_CFG, SPRD_DMA_CHN_EN,
SPRD_DMA_CHN_EN);
}
static void sprd_dma_disable_chn(struct sprd_dma_chn *schan)
{
sprd_dma_chn_update(schan, SPRD_DMA_CHN_CFG, SPRD_DMA_CHN_EN, 0);
}
static void sprd_dma_soft_request(struct sprd_dma_chn *schan)
{
sprd_dma_chn_update(schan, SPRD_DMA_CHN_REQ, SPRD_DMA_REQ_EN,
SPRD_DMA_REQ_EN);
}
static void sprd_dma_pause_resume(struct sprd_dma_chn *schan, bool enable)
{
struct sprd_dma_dev *sdev = to_sprd_dma_dev(&schan->vc.chan);
u32 pause, timeout = SPRD_DMA_PAUSE_CNT;
if (enable) {
sprd_dma_chn_update(schan, SPRD_DMA_CHN_PAUSE,
SPRD_DMA_PAUSE_EN, SPRD_DMA_PAUSE_EN);
do {
pause = readl(schan->chn_base + SPRD_DMA_CHN_PAUSE);
if (pause & SPRD_DMA_PAUSE_STS)
break;
cpu_relax();
} while (--timeout > 0);
if (!timeout)
dev_warn(sdev->dma_dev.dev,
"pause dma controller timeout\n");
} else {
sprd_dma_chn_update(schan, SPRD_DMA_CHN_PAUSE,
SPRD_DMA_PAUSE_EN, 0);
}
}
static void sprd_dma_stop_and_disable(struct sprd_dma_chn *schan)
{
u32 cfg = readl(schan->chn_base + SPRD_DMA_CHN_CFG);
if (!(cfg & SPRD_DMA_CHN_EN))
return;
sprd_dma_pause_resume(schan, true);
sprd_dma_disable_chn(schan);
}
static unsigned long sprd_dma_get_src_addr(struct sprd_dma_chn *schan)
{
unsigned long addr, addr_high;
addr = readl(schan->chn_base + SPRD_DMA_CHN_SRC_ADDR);
addr_high = readl(schan->chn_base + SPRD_DMA_CHN_WARP_PTR) &
SPRD_DMA_HIGH_ADDR_MASK;
return addr | (addr_high << SPRD_DMA_HIGH_ADDR_OFFSET);
}
static unsigned long sprd_dma_get_dst_addr(struct sprd_dma_chn *schan)
{
unsigned long addr, addr_high;
addr = readl(schan->chn_base + SPRD_DMA_CHN_DES_ADDR);
addr_high = readl(schan->chn_base + SPRD_DMA_CHN_WARP_TO) &
SPRD_DMA_HIGH_ADDR_MASK;
return addr | (addr_high << SPRD_DMA_HIGH_ADDR_OFFSET);
}
static enum sprd_dma_int_type sprd_dma_get_int_type(struct sprd_dma_chn *schan)
{
struct sprd_dma_dev *sdev = to_sprd_dma_dev(&schan->vc.chan);
u32 intc_sts = readl(schan->chn_base + SPRD_DMA_CHN_INTC) &
SPRD_DMA_CHN_INT_STS;
switch (intc_sts) {
case SPRD_DMA_CFGERR_INT_STS:
return SPRD_DMA_CFGERR_INT;
case SPRD_DMA_LIST_INT_STS:
return SPRD_DMA_LIST_INT;
case SPRD_DMA_TRSC_INT_STS:
return SPRD_DMA_TRANS_INT;
case SPRD_DMA_BLK_INT_STS:
return SPRD_DMA_BLK_INT;
case SPRD_DMA_FRAG_INT_STS:
return SPRD_DMA_FRAG_INT;
default:
dev_warn(sdev->dma_dev.dev, "incorrect dma interrupt type\n");
return SPRD_DMA_NO_INT;
}
}
static enum sprd_dma_req_mode sprd_dma_get_req_type(struct sprd_dma_chn *schan)
{
u32 frag_reg = readl(schan->chn_base + SPRD_DMA_CHN_FRG_LEN);
return (frag_reg >> SPRD_DMA_REQ_MODE_OFFSET) & SPRD_DMA_REQ_MODE_MASK;
}
static int sprd_dma_set_2stage_config(struct sprd_dma_chn *schan)
{
struct sprd_dma_dev *sdev = to_sprd_dma_dev(&schan->vc.chan);
u32 val, chn = schan->chn_num + 1;
switch (schan->chn_mode) {
case SPRD_DMA_SRC_CHN0:
val = chn & SPRD_DMA_GLB_SRC_CHN_MASK;
val |= BIT(schan->trg_mode - 1) << SPRD_DMA_GLB_TRG_OFFSET;
val |= SPRD_DMA_GLB_2STAGE_EN;
if (schan->int_type != SPRD_DMA_NO_INT)
val |= SPRD_DMA_GLB_SRC_INT;
sprd_dma_glb_update(sdev, SPRD_DMA_GLB_2STAGE_GRP1, val, val);
break;
case SPRD_DMA_SRC_CHN1:
val = chn & SPRD_DMA_GLB_SRC_CHN_MASK;
val |= BIT(schan->trg_mode - 1) << SPRD_DMA_GLB_TRG_OFFSET;
val |= SPRD_DMA_GLB_2STAGE_EN;
if (schan->int_type != SPRD_DMA_NO_INT)
val |= SPRD_DMA_GLB_SRC_INT;
sprd_dma_glb_update(sdev, SPRD_DMA_GLB_2STAGE_GRP2, val, val);
break;
case SPRD_DMA_DST_CHN0:
val = (chn << SPRD_DMA_GLB_DEST_CHN_OFFSET) &
SPRD_DMA_GLB_DEST_CHN_MASK;
val |= SPRD_DMA_GLB_2STAGE_EN;
if (schan->int_type != SPRD_DMA_NO_INT)
val |= SPRD_DMA_GLB_DEST_INT;
sprd_dma_glb_update(sdev, SPRD_DMA_GLB_2STAGE_GRP1, val, val);
break;
case SPRD_DMA_DST_CHN1:
val = (chn << SPRD_DMA_GLB_DEST_CHN_OFFSET) &
SPRD_DMA_GLB_DEST_CHN_MASK;
val |= SPRD_DMA_GLB_2STAGE_EN;
if (schan->int_type != SPRD_DMA_NO_INT)
val |= SPRD_DMA_GLB_DEST_INT;
sprd_dma_glb_update(sdev, SPRD_DMA_GLB_2STAGE_GRP2, val, val);
break;
default:
dev_err(sdev->dma_dev.dev, "invalid channel mode setting %d\n",
schan->chn_mode);
return -EINVAL;
}
return 0;
}
static void sprd_dma_set_pending(struct sprd_dma_chn *schan, bool enable)
{
struct sprd_dma_dev *sdev = to_sprd_dma_dev(&schan->vc.chan);
u32 reg, val, req_id;
if (schan->dev_id == SPRD_DMA_SOFTWARE_UID)
return;
/* The DMA request id always starts from 0. */
req_id = schan->dev_id - 1;
if (req_id < 32) {
reg = SPRD_DMA_GLB_REQ_PEND0_EN;
val = BIT(req_id);
} else {
reg = SPRD_DMA_GLB_REQ_PEND1_EN;
val = BIT(req_id - 32);
}
sprd_dma_glb_update(sdev, reg, val, enable ? val : 0);
}
static void sprd_dma_set_chn_config(struct sprd_dma_chn *schan,
struct sprd_dma_desc *sdesc)
{
struct sprd_dma_chn_hw *cfg = &sdesc->chn_hw;
writel(cfg->pause, schan->chn_base + SPRD_DMA_CHN_PAUSE);
writel(cfg->cfg, schan->chn_base + SPRD_DMA_CHN_CFG);
writel(cfg->intc, schan->chn_base + SPRD_DMA_CHN_INTC);
writel(cfg->src_addr, schan->chn_base + SPRD_DMA_CHN_SRC_ADDR);
writel(cfg->des_addr, schan->chn_base + SPRD_DMA_CHN_DES_ADDR);
writel(cfg->frg_len, schan->chn_base + SPRD_DMA_CHN_FRG_LEN);
writel(cfg->blk_len, schan->chn_base + SPRD_DMA_CHN_BLK_LEN);
writel(cfg->trsc_len, schan->chn_base + SPRD_DMA_CHN_TRSC_LEN);
writel(cfg->trsf_step, schan->chn_base + SPRD_DMA_CHN_TRSF_STEP);
writel(cfg->wrap_ptr, schan->chn_base + SPRD_DMA_CHN_WARP_PTR);
writel(cfg->wrap_to, schan->chn_base + SPRD_DMA_CHN_WARP_TO);
writel(cfg->llist_ptr, schan->chn_base + SPRD_DMA_CHN_LLIST_PTR);
writel(cfg->frg_step, schan->chn_base + SPRD_DMA_CHN_FRAG_STEP);
writel(cfg->src_blk_step, schan->chn_base + SPRD_DMA_CHN_SRC_BLK_STEP);
writel(cfg->des_blk_step, schan->chn_base + SPRD_DMA_CHN_DES_BLK_STEP);
writel(cfg->req, schan->chn_base + SPRD_DMA_CHN_REQ);
}
static void sprd_dma_start(struct sprd_dma_chn *schan)
{
struct virt_dma_desc *vd = vchan_next_desc(&schan->vc);
if (!vd)
return;
list_del(&vd->node);
schan->cur_desc = to_sprd_dma_desc(vd);
/*
* Set 2-stage configuration if the channel starts one 2-stage
* transfer.
*/
if (schan->chn_mode && sprd_dma_set_2stage_config(schan))
return;
/*
* Copy the DMA configuration from DMA descriptor to this hardware
* channel.
*/
sprd_dma_set_chn_config(schan, schan->cur_desc);
sprd_dma_set_uid(schan);
sprd_dma_set_pending(schan, true);
sprd_dma_enable_chn(schan);
if (schan->dev_id == SPRD_DMA_SOFTWARE_UID &&
schan->chn_mode != SPRD_DMA_DST_CHN0 &&
schan->chn_mode != SPRD_DMA_DST_CHN1)
sprd_dma_soft_request(schan);
}
static void sprd_dma_stop(struct sprd_dma_chn *schan)
{
sprd_dma_stop_and_disable(schan);
sprd_dma_set_pending(schan, false);
sprd_dma_unset_uid(schan);
sprd_dma_clear_int(schan);
schan->cur_desc = NULL;
}
static bool sprd_dma_check_trans_done(struct sprd_dma_desc *sdesc,
enum sprd_dma_int_type int_type,
enum sprd_dma_req_mode req_mode)
{
if (int_type == SPRD_DMA_NO_INT)
return false;
if (int_type >= req_mode + 1)
return true;
else
return false;
}
static irqreturn_t dma_irq_handle(int irq, void *dev_id)
{
struct sprd_dma_dev *sdev = (struct sprd_dma_dev *)dev_id;
u32 irq_status = readl(sdev->glb_base + SPRD_DMA_GLB_INT_MSK_STS);
struct sprd_dma_chn *schan;
struct sprd_dma_desc *sdesc;
enum sprd_dma_req_mode req_type;
enum sprd_dma_int_type int_type;
bool trans_done = false, cyclic = false;
u32 i;
while (irq_status) {
i = __ffs(irq_status);
irq_status &= (irq_status - 1);
schan = &sdev->channels[i];
spin_lock(&schan->vc.lock);
sdesc = schan->cur_desc;
if (!sdesc) {
spin_unlock(&schan->vc.lock);
return IRQ_HANDLED;
}
int_type = sprd_dma_get_int_type(schan);
req_type = sprd_dma_get_req_type(schan);
sprd_dma_clear_int(schan);
/* cyclic mode schedule callback */
cyclic = schan->linklist.phy_addr ? true : false;
if (cyclic == true) {
vchan_cyclic_callback(&sdesc->vd);
} else {
/* Check if the dma request descriptor is done. */
trans_done = sprd_dma_check_trans_done(sdesc, int_type,
req_type);
if (trans_done == true) {
vchan_cookie_complete(&sdesc->vd);
schan->cur_desc = NULL;
sprd_dma_start(schan);
}
}
spin_unlock(&schan->vc.lock);
}
return IRQ_HANDLED;
}
static int sprd_dma_alloc_chan_resources(struct dma_chan *chan)
{
return pm_runtime_get_sync(chan->device->dev);
}
static void sprd_dma_free_chan_resources(struct dma_chan *chan)
{
struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
struct virt_dma_desc *cur_vd = NULL;
unsigned long flags;
spin_lock_irqsave(&schan->vc.lock, flags);
if (schan->cur_desc)
cur_vd = &schan->cur_desc->vd;
sprd_dma_stop(schan);
spin_unlock_irqrestore(&schan->vc.lock, flags);
if (cur_vd)
sprd_dma_free_desc(cur_vd);
vchan_free_chan_resources(&schan->vc);
pm_runtime_put(chan->device->dev);
}
static enum dma_status sprd_dma_tx_status(struct dma_chan *chan,
dma_cookie_t cookie,
struct dma_tx_state *txstate)
{
struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
struct virt_dma_desc *vd;
unsigned long flags;
enum dma_status ret;
u32 pos;
ret = dma_cookie_status(chan, cookie, txstate);
if (ret == DMA_COMPLETE || !txstate)
return ret;
spin_lock_irqsave(&schan->vc.lock, flags);
vd = vchan_find_desc(&schan->vc, cookie);
if (vd) {
struct sprd_dma_desc *sdesc = to_sprd_dma_desc(vd);
struct sprd_dma_chn_hw *hw = &sdesc->chn_hw;
if (hw->trsc_len > 0)
pos = hw->trsc_len;
else if (hw->blk_len > 0)
pos = hw->blk_len;
else if (hw->frg_len > 0)
pos = hw->frg_len;
else
pos = 0;
} else if (schan->cur_desc && schan->cur_desc->vd.tx.cookie == cookie) {
struct sprd_dma_desc *sdesc = schan->cur_desc;
if (sdesc->dir == DMA_DEV_TO_MEM)
pos = sprd_dma_get_dst_addr(schan);
else
pos = sprd_dma_get_src_addr(schan);
} else {
pos = 0;
}
spin_unlock_irqrestore(&schan->vc.lock, flags);
dma_set_residue(txstate, pos);
return ret;
}
static void sprd_dma_issue_pending(struct dma_chan *chan)
{
struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
unsigned long flags;
spin_lock_irqsave(&schan->vc.lock, flags);
if (vchan_issue_pending(&schan->vc) && !schan->cur_desc)
sprd_dma_start(schan);
spin_unlock_irqrestore(&schan->vc.lock, flags);
}
static int sprd_dma_get_datawidth(enum dma_slave_buswidth buswidth)
{
switch (buswidth) {
case DMA_SLAVE_BUSWIDTH_1_BYTE:
case DMA_SLAVE_BUSWIDTH_2_BYTES:
case DMA_SLAVE_BUSWIDTH_4_BYTES:
case DMA_SLAVE_BUSWIDTH_8_BYTES:
return ffs(buswidth) - 1;
default:
return -EINVAL;
}
}
static int sprd_dma_get_step(enum dma_slave_buswidth buswidth)
{
switch (buswidth) {
case DMA_SLAVE_BUSWIDTH_1_BYTE:
case DMA_SLAVE_BUSWIDTH_2_BYTES:
case DMA_SLAVE_BUSWIDTH_4_BYTES:
case DMA_SLAVE_BUSWIDTH_8_BYTES:
return buswidth;
default:
return -EINVAL;
}
}
static int sprd_dma_fill_desc(struct dma_chan *chan,
struct sprd_dma_chn_hw *hw,
unsigned int sglen, int sg_index,
dma_addr_t src, dma_addr_t dst, u32 len,
enum dma_transfer_direction dir,
unsigned long flags,
struct dma_slave_config *slave_cfg)
{
struct sprd_dma_dev *sdev = to_sprd_dma_dev(chan);
struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
enum sprd_dma_chn_mode chn_mode = schan->chn_mode;
u32 req_mode = (flags >> SPRD_DMA_REQ_SHIFT) & SPRD_DMA_REQ_MODE_MASK;
u32 int_mode = flags & SPRD_DMA_INT_MASK;
int src_datawidth, dst_datawidth, src_step, dst_step;
u32 temp, fix_mode = 0, fix_en = 0;
phys_addr_t llist_ptr;
if (dir == DMA_MEM_TO_DEV) {
src_step = sprd_dma_get_step(slave_cfg->src_addr_width);
if (src_step < 0) {
dev_err(sdev->dma_dev.dev, "invalid source step\n");
return src_step;
}
/*
* For 2-stage transfer, destination channel step can not be 0,
* since destination device is AON IRAM.
*/
if (chn_mode == SPRD_DMA_DST_CHN0 ||
chn_mode == SPRD_DMA_DST_CHN1)
dst_step = src_step;
else
dst_step = SPRD_DMA_NONE_STEP;
} else {
dst_step = sprd_dma_get_step(slave_cfg->dst_addr_width);
if (dst_step < 0) {
dev_err(sdev->dma_dev.dev, "invalid destination step\n");
return dst_step;
}
src_step = SPRD_DMA_NONE_STEP;
}
src_datawidth = sprd_dma_get_datawidth(slave_cfg->src_addr_width);
if (src_datawidth < 0) {
dev_err(sdev->dma_dev.dev, "invalid source datawidth\n");
return src_datawidth;
}
dst_datawidth = sprd_dma_get_datawidth(slave_cfg->dst_addr_width);
if (dst_datawidth < 0) {
dev_err(sdev->dma_dev.dev, "invalid destination datawidth\n");
return dst_datawidth;
}
hw->cfg = SPRD_DMA_DONOT_WAIT_BDONE << SPRD_DMA_WAIT_BDONE_OFFSET;
/*
* wrap_ptr and wrap_to will save the high 4 bits source address and
* destination address.
*/
hw->wrap_ptr = (src >> SPRD_DMA_HIGH_ADDR_OFFSET) & SPRD_DMA_HIGH_ADDR_MASK;
hw->wrap_to = (dst >> SPRD_DMA_HIGH_ADDR_OFFSET) & SPRD_DMA_HIGH_ADDR_MASK;
hw->src_addr = src & SPRD_DMA_LOW_ADDR_MASK;
hw->des_addr = dst & SPRD_DMA_LOW_ADDR_MASK;
/*
* If the src step and dst step both are 0 or both are not 0, that means
* we can not enable the fix mode. If one is 0 and another one is not,
* we can enable the fix mode.
*/
if ((src_step != 0 && dst_step != 0) || (src_step | dst_step) == 0) {
fix_en = 0;
} else {
fix_en = 1;
if (src_step)
fix_mode = 1;
else
fix_mode = 0;
}
hw->intc = int_mode | SPRD_DMA_CFG_ERR_INT_EN;
temp = src_datawidth << SPRD_DMA_SRC_DATAWIDTH_OFFSET;
temp |= dst_datawidth << SPRD_DMA_DES_DATAWIDTH_OFFSET;
temp |= req_mode << SPRD_DMA_REQ_MODE_OFFSET;
temp |= fix_mode << SPRD_DMA_FIX_SEL_OFFSET;
temp |= fix_en << SPRD_DMA_FIX_EN_OFFSET;
dmaengine: sprd: Add wrap address support for link-list mode The Spreadtrum Audio compress offload mode will use 2-stage DMA transfer to save power. That means we can request 2 dma channels, one for source channel, and another one for destination channel. Once the source channel's transaction is done, it will trigger the destination channel's transaction automatically by hardware signal. In this case, the source channel will transfer data from IRAM buffer to the DSP fifo to decoding/encoding, once IRAM buffer is empty by transferring done, the destination channel will start to transfer data from DDR buffer to IRAM buffer. Since the destination channel will use link-list mode to fill the IRAM data, and IRAM buffer is allocated by 32K, and DDR buffer is larger to 2M, that means we need lots of link-list nodes to do a cyclic transfer, instead wasting lots of link-list memory, we can use wrap address support to reduce link-list node number, which means when the transfer address reaches the wrap address, the transfer address will jump to the wrap_to address specified by wrap_to register, and only 2 link-list nodes can do a cyclic transfer to transfer data from DDR to IRAM. Thus this patch adds wrap address to support this case. [Baolin Wang changes the commit message] Signed-off-by: Eric Long <eric.long@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Link: https://lore.kernel.org/r/85a5484bc1f3dd53ce6f92700ad8b35f30a0b096.1571812029.git.baolin.wang@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-23 06:31:32 +00:00
temp |= schan->linklist.wrap_addr ?
SPRD_DMA_WRAP_EN | SPRD_DMA_WRAP_SEL_DEST : 0;
temp |= slave_cfg->src_maxburst & SPRD_DMA_FRG_LEN_MASK;
hw->frg_len = temp;
hw->blk_len = slave_cfg->src_maxburst & SPRD_DMA_BLK_LEN_MASK;
hw->trsc_len = len & SPRD_DMA_TRSC_LEN_MASK;
temp = (dst_step & SPRD_DMA_TRSF_STEP_MASK) << SPRD_DMA_DEST_TRSF_STEP_OFFSET;
temp |= (src_step & SPRD_DMA_TRSF_STEP_MASK) << SPRD_DMA_SRC_TRSF_STEP_OFFSET;
hw->trsf_step = temp;
/* link-list configuration */
if (schan->linklist.phy_addr) {
hw->cfg |= SPRD_DMA_LINKLIST_EN;
/* link-list index */
temp = sglen ? (sg_index + 1) % sglen : 0;
/* Next link-list configuration's physical address offset */
temp = temp * sizeof(*hw) + SPRD_DMA_CHN_SRC_ADDR;
/*
* Set the link-list pointer point to next link-list
* configuration's physical address.
*/
llist_ptr = schan->linklist.phy_addr + temp;
hw->llist_ptr = lower_32_bits(llist_ptr);
hw->src_blk_step = (upper_32_bits(llist_ptr) << SPRD_DMA_LLIST_HIGH_SHIFT) &
SPRD_DMA_LLIST_HIGH_MASK;
dmaengine: sprd: Add wrap address support for link-list mode The Spreadtrum Audio compress offload mode will use 2-stage DMA transfer to save power. That means we can request 2 dma channels, one for source channel, and another one for destination channel. Once the source channel's transaction is done, it will trigger the destination channel's transaction automatically by hardware signal. In this case, the source channel will transfer data from IRAM buffer to the DSP fifo to decoding/encoding, once IRAM buffer is empty by transferring done, the destination channel will start to transfer data from DDR buffer to IRAM buffer. Since the destination channel will use link-list mode to fill the IRAM data, and IRAM buffer is allocated by 32K, and DDR buffer is larger to 2M, that means we need lots of link-list nodes to do a cyclic transfer, instead wasting lots of link-list memory, we can use wrap address support to reduce link-list node number, which means when the transfer address reaches the wrap address, the transfer address will jump to the wrap_to address specified by wrap_to register, and only 2 link-list nodes can do a cyclic transfer to transfer data from DDR to IRAM. Thus this patch adds wrap address to support this case. [Baolin Wang changes the commit message] Signed-off-by: Eric Long <eric.long@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Link: https://lore.kernel.org/r/85a5484bc1f3dd53ce6f92700ad8b35f30a0b096.1571812029.git.baolin.wang@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-23 06:31:32 +00:00
if (schan->linklist.wrap_addr) {
hw->wrap_ptr |= schan->linklist.wrap_addr &
SPRD_DMA_WRAP_ADDR_MASK;
hw->wrap_to |= dst & SPRD_DMA_WRAP_ADDR_MASK;
}
} else {
hw->llist_ptr = 0;
hw->src_blk_step = 0;
}
hw->frg_step = 0;
hw->des_blk_step = 0;
return 0;
}
static int sprd_dma_fill_linklist_desc(struct dma_chan *chan,
unsigned int sglen, int sg_index,
dma_addr_t src, dma_addr_t dst, u32 len,
enum dma_transfer_direction dir,
unsigned long flags,
struct dma_slave_config *slave_cfg)
{
struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
struct sprd_dma_chn_hw *hw;
if (!schan->linklist.virt_addr)
return -EINVAL;
hw = (struct sprd_dma_chn_hw *)(schan->linklist.virt_addr +
sg_index * sizeof(*hw));
return sprd_dma_fill_desc(chan, hw, sglen, sg_index, src, dst, len,
dir, flags, slave_cfg);
}
static struct dma_async_tx_descriptor *
sprd_dma_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
size_t len, unsigned long flags)
{
struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
struct sprd_dma_desc *sdesc;
struct sprd_dma_chn_hw *hw;
enum sprd_dma_datawidth datawidth;
u32 step, temp;
sdesc = kzalloc(sizeof(*sdesc), GFP_NOWAIT);
if (!sdesc)
return NULL;
hw = &sdesc->chn_hw;
hw->cfg = SPRD_DMA_DONOT_WAIT_BDONE << SPRD_DMA_WAIT_BDONE_OFFSET;
hw->intc = SPRD_DMA_TRANS_INT | SPRD_DMA_CFG_ERR_INT_EN;
hw->src_addr = src & SPRD_DMA_LOW_ADDR_MASK;
hw->des_addr = dest & SPRD_DMA_LOW_ADDR_MASK;
hw->wrap_ptr = (src >> SPRD_DMA_HIGH_ADDR_OFFSET) &
SPRD_DMA_HIGH_ADDR_MASK;
hw->wrap_to = (dest >> SPRD_DMA_HIGH_ADDR_OFFSET) &
SPRD_DMA_HIGH_ADDR_MASK;
if (IS_ALIGNED(len, 8)) {
datawidth = SPRD_DMA_DATAWIDTH_8_BYTES;
step = SPRD_DMA_DWORD_STEP;
} else if (IS_ALIGNED(len, 4)) {
datawidth = SPRD_DMA_DATAWIDTH_4_BYTES;
step = SPRD_DMA_WORD_STEP;
} else if (IS_ALIGNED(len, 2)) {
datawidth = SPRD_DMA_DATAWIDTH_2_BYTES;
step = SPRD_DMA_SHORT_STEP;
} else {
datawidth = SPRD_DMA_DATAWIDTH_1_BYTE;
step = SPRD_DMA_BYTE_STEP;
}
temp = datawidth << SPRD_DMA_SRC_DATAWIDTH_OFFSET;
temp |= datawidth << SPRD_DMA_DES_DATAWIDTH_OFFSET;
temp |= SPRD_DMA_TRANS_REQ << SPRD_DMA_REQ_MODE_OFFSET;
temp |= len & SPRD_DMA_FRG_LEN_MASK;
hw->frg_len = temp;
hw->blk_len = len & SPRD_DMA_BLK_LEN_MASK;
hw->trsc_len = len & SPRD_DMA_TRSC_LEN_MASK;
temp = (step & SPRD_DMA_TRSF_STEP_MASK) << SPRD_DMA_DEST_TRSF_STEP_OFFSET;
temp |= (step & SPRD_DMA_TRSF_STEP_MASK) << SPRD_DMA_SRC_TRSF_STEP_OFFSET;
hw->trsf_step = temp;
return vchan_tx_prep(&schan->vc, &sdesc->vd, flags);
}
static struct dma_async_tx_descriptor *
sprd_dma_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
unsigned int sglen, enum dma_transfer_direction dir,
unsigned long flags, void *context)
{
struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
struct dma_slave_config *slave_cfg = &schan->slave_cfg;
dma_addr_t src = 0, dst = 0;
dma_addr_t start_src = 0, start_dst = 0;
struct sprd_dma_desc *sdesc;
struct scatterlist *sg;
u32 len = 0;
int ret, i;
if (!is_slave_direction(dir))
return NULL;
if (context) {
struct sprd_dma_linklist *ll_cfg =
(struct sprd_dma_linklist *)context;
schan->linklist.phy_addr = ll_cfg->phy_addr;
schan->linklist.virt_addr = ll_cfg->virt_addr;
dmaengine: sprd: Add wrap address support for link-list mode The Spreadtrum Audio compress offload mode will use 2-stage DMA transfer to save power. That means we can request 2 dma channels, one for source channel, and another one for destination channel. Once the source channel's transaction is done, it will trigger the destination channel's transaction automatically by hardware signal. In this case, the source channel will transfer data from IRAM buffer to the DSP fifo to decoding/encoding, once IRAM buffer is empty by transferring done, the destination channel will start to transfer data from DDR buffer to IRAM buffer. Since the destination channel will use link-list mode to fill the IRAM data, and IRAM buffer is allocated by 32K, and DDR buffer is larger to 2M, that means we need lots of link-list nodes to do a cyclic transfer, instead wasting lots of link-list memory, we can use wrap address support to reduce link-list node number, which means when the transfer address reaches the wrap address, the transfer address will jump to the wrap_to address specified by wrap_to register, and only 2 link-list nodes can do a cyclic transfer to transfer data from DDR to IRAM. Thus this patch adds wrap address to support this case. [Baolin Wang changes the commit message] Signed-off-by: Eric Long <eric.long@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Link: https://lore.kernel.org/r/85a5484bc1f3dd53ce6f92700ad8b35f30a0b096.1571812029.git.baolin.wang@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-23 06:31:32 +00:00
schan->linklist.wrap_addr = ll_cfg->wrap_addr;
} else {
schan->linklist.phy_addr = 0;
schan->linklist.virt_addr = 0;
dmaengine: sprd: Add wrap address support for link-list mode The Spreadtrum Audio compress offload mode will use 2-stage DMA transfer to save power. That means we can request 2 dma channels, one for source channel, and another one for destination channel. Once the source channel's transaction is done, it will trigger the destination channel's transaction automatically by hardware signal. In this case, the source channel will transfer data from IRAM buffer to the DSP fifo to decoding/encoding, once IRAM buffer is empty by transferring done, the destination channel will start to transfer data from DDR buffer to IRAM buffer. Since the destination channel will use link-list mode to fill the IRAM data, and IRAM buffer is allocated by 32K, and DDR buffer is larger to 2M, that means we need lots of link-list nodes to do a cyclic transfer, instead wasting lots of link-list memory, we can use wrap address support to reduce link-list node number, which means when the transfer address reaches the wrap address, the transfer address will jump to the wrap_to address specified by wrap_to register, and only 2 link-list nodes can do a cyclic transfer to transfer data from DDR to IRAM. Thus this patch adds wrap address to support this case. [Baolin Wang changes the commit message] Signed-off-by: Eric Long <eric.long@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Link: https://lore.kernel.org/r/85a5484bc1f3dd53ce6f92700ad8b35f30a0b096.1571812029.git.baolin.wang@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-23 06:31:32 +00:00
schan->linklist.wrap_addr = 0;
}
/*
* Set channel mode, interrupt mode and trigger mode for 2-stage
* transfer.
*/
schan->chn_mode =
(flags >> SPRD_DMA_CHN_MODE_SHIFT) & SPRD_DMA_CHN_MODE_MASK;
schan->trg_mode =
(flags >> SPRD_DMA_TRG_MODE_SHIFT) & SPRD_DMA_TRG_MODE_MASK;
schan->int_type = flags & SPRD_DMA_INT_TYPE_MASK;
sdesc = kzalloc(sizeof(*sdesc), GFP_NOWAIT);
if (!sdesc)
return NULL;
sdesc->dir = dir;
for_each_sg(sgl, sg, sglen, i) {
len = sg_dma_len(sg);
if (dir == DMA_MEM_TO_DEV) {
src = sg_dma_address(sg);
dst = slave_cfg->dst_addr;
} else {
src = slave_cfg->src_addr;
dst = sg_dma_address(sg);
}
if (!i) {
start_src = src;
start_dst = dst;
}
/*
* The link-list mode needs at least 2 link-list
* configurations. If there is only one sg, it doesn't
* need to fill the link-list configuration.
*/
if (sglen < 2)
break;
ret = sprd_dma_fill_linklist_desc(chan, sglen, i, src, dst, len,
dir, flags, slave_cfg);
if (ret) {
kfree(sdesc);
return NULL;
}
}
ret = sprd_dma_fill_desc(chan, &sdesc->chn_hw, 0, 0, start_src,
start_dst, len, dir, flags, slave_cfg);
if (ret) {
kfree(sdesc);
return NULL;
}
return vchan_tx_prep(&schan->vc, &sdesc->vd, flags);
}
static int sprd_dma_slave_config(struct dma_chan *chan,
struct dma_slave_config *config)
{
struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
struct dma_slave_config *slave_cfg = &schan->slave_cfg;
memcpy(slave_cfg, config, sizeof(*config));
return 0;
}
static int sprd_dma_pause(struct dma_chan *chan)
{
struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
unsigned long flags;
spin_lock_irqsave(&schan->vc.lock, flags);
sprd_dma_pause_resume(schan, true);
spin_unlock_irqrestore(&schan->vc.lock, flags);
return 0;
}
static int sprd_dma_resume(struct dma_chan *chan)
{
struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
unsigned long flags;
spin_lock_irqsave(&schan->vc.lock, flags);
sprd_dma_pause_resume(schan, false);
spin_unlock_irqrestore(&schan->vc.lock, flags);
return 0;
}
static int sprd_dma_terminate_all(struct dma_chan *chan)
{
struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
struct virt_dma_desc *cur_vd = NULL;
unsigned long flags;
LIST_HEAD(head);
spin_lock_irqsave(&schan->vc.lock, flags);
if (schan->cur_desc)
cur_vd = &schan->cur_desc->vd;
sprd_dma_stop(schan);
vchan_get_all_descriptors(&schan->vc, &head);
spin_unlock_irqrestore(&schan->vc.lock, flags);
if (cur_vd)
sprd_dma_free_desc(cur_vd);
vchan_dma_desc_free_list(&schan->vc, &head);
return 0;
}
static void sprd_dma_free_desc(struct virt_dma_desc *vd)
{
struct sprd_dma_desc *sdesc = to_sprd_dma_desc(vd);
kfree(sdesc);
}
static bool sprd_dma_filter_fn(struct dma_chan *chan, void *param)
{
struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
u32 slave_id = *(u32 *)param;
schan->dev_id = slave_id;
return true;
}
static int sprd_dma_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct sprd_dma_dev *sdev;
struct sprd_dma_chn *dma_chn;
u32 chn_count;
int ret, i;
ret = device_property_read_u32(&pdev->dev, "#dma-channels", &chn_count);
if (ret) {
dev_err(&pdev->dev, "get dma channels count failed\n");
return ret;
}
sdev = devm_kzalloc(&pdev->dev,
struct_size(sdev, channels, chn_count),
GFP_KERNEL);
if (!sdev)
return -ENOMEM;
sdev->clk = devm_clk_get(&pdev->dev, "enable");
if (IS_ERR(sdev->clk)) {
dev_err(&pdev->dev, "get enable clock failed\n");
return PTR_ERR(sdev->clk);
}
/* ashb clock is optional for AGCP DMA */
sdev->ashb_clk = devm_clk_get(&pdev->dev, "ashb_eb");
if (IS_ERR(sdev->ashb_clk))
dev_warn(&pdev->dev, "no optional ashb eb clock\n");
/*
* We have three DMA controllers: AP DMA, AON DMA and AGCP DMA. For AGCP
* DMA controller, it can or do not request the irq, which will save
* system power without resuming system by DMA interrupts if AGCP DMA
* does not request the irq. Thus the DMA interrupts property should
* be optional.
*/
sdev->irq = platform_get_irq(pdev, 0);
if (sdev->irq > 0) {
ret = devm_request_irq(&pdev->dev, sdev->irq, dma_irq_handle,
0, "sprd_dma", (void *)sdev);
if (ret < 0) {
dev_err(&pdev->dev, "request dma irq failed\n");
return ret;
}
} else {
dev_warn(&pdev->dev, "no interrupts for the dma controller\n");
}
sdev->glb_base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(sdev->glb_base))
return PTR_ERR(sdev->glb_base);
dma_cap_set(DMA_MEMCPY, sdev->dma_dev.cap_mask);
sdev->total_chns = chn_count;
sdev->dma_dev.chancnt = chn_count;
INIT_LIST_HEAD(&sdev->dma_dev.channels);
INIT_LIST_HEAD(&sdev->dma_dev.global_node);
sdev->dma_dev.dev = &pdev->dev;
sdev->dma_dev.device_alloc_chan_resources = sprd_dma_alloc_chan_resources;
sdev->dma_dev.device_free_chan_resources = sprd_dma_free_chan_resources;
sdev->dma_dev.device_tx_status = sprd_dma_tx_status;
sdev->dma_dev.device_issue_pending = sprd_dma_issue_pending;
sdev->dma_dev.device_prep_dma_memcpy = sprd_dma_prep_dma_memcpy;
sdev->dma_dev.device_prep_slave_sg = sprd_dma_prep_slave_sg;
sdev->dma_dev.device_config = sprd_dma_slave_config;
sdev->dma_dev.device_pause = sprd_dma_pause;
sdev->dma_dev.device_resume = sprd_dma_resume;
sdev->dma_dev.device_terminate_all = sprd_dma_terminate_all;
for (i = 0; i < chn_count; i++) {
dma_chn = &sdev->channels[i];
dma_chn->chn_num = i;
dma_chn->cur_desc = NULL;
/* get each channel's registers base address. */
dma_chn->chn_base = sdev->glb_base + SPRD_DMA_CHN_REG_OFFSET +
SPRD_DMA_CHN_REG_LENGTH * i;
dma_chn->vc.desc_free = sprd_dma_free_desc;
vchan_init(&dma_chn->vc, &sdev->dma_dev);
}
platform_set_drvdata(pdev, sdev);
ret = sprd_dma_enable(sdev);
if (ret)
return ret;
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
ret = pm_runtime_get_sync(&pdev->dev);
if (ret < 0)
goto err_rpm;
ret = dma_async_device_register(&sdev->dma_dev);
if (ret < 0) {
dev_err(&pdev->dev, "register dma device failed:%d\n", ret);
goto err_register;
}
sprd_dma_info.dma_cap = sdev->dma_dev.cap_mask;
ret = of_dma_controller_register(np, of_dma_simple_xlate,
&sprd_dma_info);
if (ret)
goto err_of_register;
pm_runtime_put(&pdev->dev);
return 0;
err_of_register:
dma_async_device_unregister(&sdev->dma_dev);
err_register:
pm_runtime_put_noidle(&pdev->dev);
pm_runtime_disable(&pdev->dev);
err_rpm:
sprd_dma_disable(sdev);
return ret;
}
static int sprd_dma_remove(struct platform_device *pdev)
{
struct sprd_dma_dev *sdev = platform_get_drvdata(pdev);
struct sprd_dma_chn *c, *cn;
int ret;
ret = pm_runtime_get_sync(&pdev->dev);
if (ret < 0)
return ret;
/* explicitly free the irq */
if (sdev->irq > 0)
devm_free_irq(&pdev->dev, sdev->irq, sdev);
list_for_each_entry_safe(c, cn, &sdev->dma_dev.channels,
vc.chan.device_node) {
list_del(&c->vc.chan.device_node);
tasklet_kill(&c->vc.task);
}
of_dma_controller_free(pdev->dev.of_node);
dma_async_device_unregister(&sdev->dma_dev);
sprd_dma_disable(sdev);
pm_runtime_put_noidle(&pdev->dev);
pm_runtime_disable(&pdev->dev);
return 0;
}
static const struct of_device_id sprd_dma_match[] = {
{ .compatible = "sprd,sc9860-dma", },
{},
};
MODULE_DEVICE_TABLE(of, sprd_dma_match);
static int __maybe_unused sprd_dma_runtime_suspend(struct device *dev)
{
struct sprd_dma_dev *sdev = dev_get_drvdata(dev);
sprd_dma_disable(sdev);
return 0;
}
static int __maybe_unused sprd_dma_runtime_resume(struct device *dev)
{
struct sprd_dma_dev *sdev = dev_get_drvdata(dev);
int ret;
ret = sprd_dma_enable(sdev);
if (ret)
dev_err(sdev->dma_dev.dev, "enable dma failed\n");
return ret;
}
static const struct dev_pm_ops sprd_dma_pm_ops = {
SET_RUNTIME_PM_OPS(sprd_dma_runtime_suspend,
sprd_dma_runtime_resume,
NULL)
};
static struct platform_driver sprd_dma_driver = {
.probe = sprd_dma_probe,
.remove = sprd_dma_remove,
.driver = {
.name = "sprd-dma",
.of_match_table = sprd_dma_match,
.pm = &sprd_dma_pm_ops,
},
};
module_platform_driver(sprd_dma_driver);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("DMA driver for Spreadtrum");
MODULE_AUTHOR("Baolin Wang <baolin.wang@spreadtrum.com>");
MODULE_AUTHOR("Eric Long <eric.long@spreadtrum.com>");
MODULE_ALIAS("platform:sprd-dma");