linux-stable/drivers/media/i2c/ov9650.c

1599 lines
42 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Omnivision OV9650/OV9652 CMOS Image Sensor driver
*
* Copyright (C) 2013, Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
*
* Register definitions and initial settings based on a driver written
* by Vladimir Fonov.
* Copyright (c) 2010, Vladimir Fonov
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
#include <linux/kernel.h>
#include <linux/media.h>
#include <linux/module.h>
#include <linux/ratelimit.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/videodev2.h>
#include <media/media-entity.h>
#include <media/v4l2-async.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
#include <media/v4l2-event.h>
#include <media/v4l2-image-sizes.h>
#include <media/v4l2-subdev.h>
#include <media/v4l2-mediabus.h>
static int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Debug level (0-2)");
#define DRIVER_NAME "OV9650"
/*
* OV9650/OV9652 register definitions
*/
#define REG_GAIN 0x00 /* Gain control, AGC[7:0] */
#define REG_BLUE 0x01 /* AWB - Blue channel gain */
#define REG_RED 0x02 /* AWB - Red channel gain */
#define REG_VREF 0x03 /* [7:6] - AGC[9:8], [5:3]/[2:0] */
#define VREF_GAIN_MASK 0xc0 /* - VREF end/start low 3 bits */
#define REG_COM1 0x04
#define COM1_CCIR656 0x40
#define REG_B_AVE 0x05
#define REG_GB_AVE 0x06
#define REG_GR_AVE 0x07
#define REG_R_AVE 0x08
#define REG_COM2 0x09
#define REG_PID 0x0a /* Product ID MSB */
#define REG_VER 0x0b /* Product ID LSB */
#define REG_COM3 0x0c
#define COM3_SWAP 0x40
#define COM3_VARIOPIXEL1 0x04
#define REG_COM4 0x0d /* Vario Pixels */
#define COM4_VARIOPIXEL2 0x80
#define REG_COM5 0x0e /* System clock options */
#define COM5_SLAVE_MODE 0x10
#define COM5_SYSTEMCLOCK48MHZ 0x80
#define REG_COM6 0x0f /* HREF & ADBLC options */
#define REG_AECH 0x10 /* Exposure value, AEC[9:2] */
#define REG_CLKRC 0x11 /* Clock control */
#define CLK_EXT 0x40 /* Use external clock directly */
#define CLK_SCALE 0x3f /* Mask for internal clock scale */
#define REG_COM7 0x12 /* SCCB reset, output format */
#define COM7_RESET 0x80
#define COM7_FMT_MASK 0x38
#define COM7_FMT_VGA 0x40
#define COM7_FMT_CIF 0x20
#define COM7_FMT_QVGA 0x10
#define COM7_FMT_QCIF 0x08
#define COM7_RGB 0x04
#define COM7_YUV 0x00
#define COM7_BAYER 0x01
#define COM7_PBAYER 0x05
#define REG_COM8 0x13 /* AGC/AEC options */
#define COM8_FASTAEC 0x80 /* Enable fast AGC/AEC */
#define COM8_AECSTEP 0x40 /* Unlimited AEC step size */
#define COM8_BFILT 0x20 /* Band filter enable */
#define COM8_AGC 0x04 /* Auto gain enable */
#define COM8_AWB 0x02 /* White balance enable */
#define COM8_AEC 0x01 /* Auto exposure enable */
#define REG_COM9 0x14 /* Gain ceiling */
#define COM9_GAIN_CEIL_MASK 0x70 /* */
#define REG_COM10 0x15 /* PCLK, HREF, HSYNC signals polarity */
#define COM10_HSYNC 0x40 /* HSYNC instead of HREF */
#define COM10_PCLK_HB 0x20 /* Suppress PCLK on horiz blank */
#define COM10_HREF_REV 0x08 /* Reverse HREF */
#define COM10_VS_LEAD 0x04 /* VSYNC on clock leading edge */
#define COM10_VS_NEG 0x02 /* VSYNC negative */
#define COM10_HS_NEG 0x01 /* HSYNC negative */
#define REG_HSTART 0x17 /* Horiz start high bits */
#define REG_HSTOP 0x18 /* Horiz stop high bits */
#define REG_VSTART 0x19 /* Vert start high bits */
#define REG_VSTOP 0x1a /* Vert stop high bits */
#define REG_PSHFT 0x1b /* Pixel delay after HREF */
#define REG_MIDH 0x1c /* Manufacturer ID MSB */
#define REG_MIDL 0x1d /* Manufufacturer ID LSB */
#define REG_MVFP 0x1e /* Image mirror/flip */
#define MVFP_MIRROR 0x20 /* Mirror image */
#define MVFP_FLIP 0x10 /* Vertical flip */
#define REG_BOS 0x20 /* B channel Offset */
#define REG_GBOS 0x21 /* Gb channel Offset */
#define REG_GROS 0x22 /* Gr channel Offset */
#define REG_ROS 0x23 /* R channel Offset */
#define REG_AEW 0x24 /* AGC upper limit */
#define REG_AEB 0x25 /* AGC lower limit */
#define REG_VPT 0x26 /* AGC/AEC fast mode op region */
#define REG_BBIAS 0x27 /* B channel output bias */
#define REG_GBBIAS 0x28 /* Gb channel output bias */
#define REG_GRCOM 0x29 /* Analog BLC & regulator */
#define REG_EXHCH 0x2a /* Dummy pixel insert MSB */
#define REG_EXHCL 0x2b /* Dummy pixel insert LSB */
#define REG_RBIAS 0x2c /* R channel output bias */
#define REG_ADVFL 0x2d /* LSB of dummy line insert */
#define REG_ADVFH 0x2e /* MSB of dummy line insert */
#define REG_YAVE 0x2f /* Y/G channel average value */
#define REG_HSYST 0x30 /* HSYNC rising edge delay LSB*/
#define REG_HSYEN 0x31 /* HSYNC falling edge delay LSB*/
#define REG_HREF 0x32 /* HREF pieces */
#define REG_CHLF 0x33 /* reserved */
#define REG_ADC 0x37 /* reserved */
#define REG_ACOM 0x38 /* reserved */
#define REG_OFON 0x39 /* Power down register */
#define OFON_PWRDN 0x08 /* Power down bit */
#define REG_TSLB 0x3a /* YUVU format */
#define TSLB_YUYV_MASK 0x0c /* UYVY or VYUY - see com13 */
#define REG_COM11 0x3b /* Night mode, banding filter enable */
#define COM11_NIGHT 0x80 /* Night mode enable */
#define COM11_NMFR 0x60 /* Two bit NM frame rate */
#define COM11_BANDING 0x01 /* Banding filter */
#define COM11_AEC_REF_MASK 0x18 /* AEC reference area selection */
#define REG_COM12 0x3c /* HREF option, UV average */
#define COM12_HREF 0x80 /* HREF always */
#define REG_COM13 0x3d /* Gamma selection, Color matrix en. */
#define COM13_GAMMA 0x80 /* Gamma enable */
#define COM13_UVSAT 0x40 /* UV saturation auto adjustment */
#define COM13_UVSWAP 0x01 /* V before U - w/TSLB */
#define REG_COM14 0x3e /* Edge enhancement options */
#define COM14_EDGE_EN 0x02
#define COM14_EEF_X2 0x01
#define REG_EDGE 0x3f /* Edge enhancement factor */
#define EDGE_FACTOR_MASK 0x0f
#define REG_COM15 0x40 /* Output range, RGB 555/565 */
#define COM15_R10F0 0x00 /* Data range 10 to F0 */
#define COM15_R01FE 0x80 /* 01 to FE */
#define COM15_R00FF 0xc0 /* 00 to FF */
#define COM15_RGB565 0x10 /* RGB565 output */
#define COM15_RGB555 0x30 /* RGB555 output */
#define COM15_SWAPRB 0x04 /* Swap R&B */
#define REG_COM16 0x41 /* Color matrix coeff options */
#define REG_COM17 0x42 /* Single frame out, banding filter */
/* n = 1...9, 0x4f..0x57 */
#define REG_MTX(__n) (0x4f + (__n) - 1)
#define REG_MTXS 0x58
/* Lens Correction Option 1...5, __n = 0...5 */
#define REG_LCC(__n) (0x62 + (__n) - 1)
#define LCC5_LCC_ENABLE 0x01 /* LCC5, enable lens correction */
#define LCC5_LCC_COLOR 0x04
#define REG_MANU 0x67 /* Manual U value */
#define REG_MANV 0x68 /* Manual V value */
#define REG_HV 0x69 /* Manual banding filter MSB */
#define REG_MBD 0x6a /* Manual banding filter value */
#define REG_DBLV 0x6b /* reserved */
#define REG_GSP 0x6c /* Gamma curve */
#define GSP_LEN 15
#define REG_GST 0x7c /* Gamma curve */
#define GST_LEN 15
#define REG_COM21 0x8b
#define REG_COM22 0x8c /* Edge enhancement, denoising */
#define COM22_WHTPCOR 0x02 /* White pixel correction enable */
#define COM22_WHTPCOROPT 0x01 /* White pixel correction option */
#define COM22_DENOISE 0x10 /* White pixel correction option */
#define REG_COM23 0x8d /* Color bar test, color gain */
#define COM23_TEST_MODE 0x10
#define REG_DBLC1 0x8f /* Digital BLC */
#define REG_DBLC_B 0x90 /* Digital BLC B channel offset */
#define REG_DBLC_R 0x91 /* Digital BLC R channel offset */
#define REG_DM_LNL 0x92 /* Dummy line low 8 bits */
#define REG_DM_LNH 0x93 /* Dummy line high 8 bits */
#define REG_LCCFB 0x9d /* Lens Correction B channel */
#define REG_LCCFR 0x9e /* Lens Correction R channel */
#define REG_DBLC_GB 0x9f /* Digital BLC GB chan offset */
#define REG_DBLC_GR 0xa0 /* Digital BLC GR chan offset */
#define REG_AECHM 0xa1 /* Exposure value - bits AEC[15:10] */
#define REG_BD50ST 0xa2 /* Banding filter value for 50Hz */
#define REG_BD60ST 0xa3 /* Banding filter value for 60Hz */
#define REG_NULL 0xff /* Array end token */
#define DEF_CLKRC 0x80
#define OV965X_ID(_msb, _lsb) ((_msb) << 8 | (_lsb))
#define OV9650_ID 0x9650
#define OV9652_ID 0x9652
struct ov965x_ctrls {
struct v4l2_ctrl_handler handler;
struct {
struct v4l2_ctrl *auto_exp;
struct v4l2_ctrl *exposure;
};
struct {
struct v4l2_ctrl *auto_wb;
struct v4l2_ctrl *blue_balance;
struct v4l2_ctrl *red_balance;
};
struct {
struct v4l2_ctrl *hflip;
struct v4l2_ctrl *vflip;
};
struct {
struct v4l2_ctrl *auto_gain;
struct v4l2_ctrl *gain;
};
struct v4l2_ctrl *brightness;
struct v4l2_ctrl *saturation;
struct v4l2_ctrl *sharpness;
struct v4l2_ctrl *light_freq;
u8 update;
};
struct ov965x_framesize {
u16 width;
u16 height;
u16 max_exp_lines;
const u8 *regs;
};
struct ov965x_interval {
struct v4l2_fract interval;
/* Maximum resolution for this interval */
struct v4l2_frmsize_discrete size;
u8 clkrc_div;
};
enum gpio_id {
GPIO_PWDN,
GPIO_RST,
NUM_GPIOS,
};
struct ov965x {
struct v4l2_subdev sd;
struct media_pad pad;
enum v4l2_mbus_type bus_type;
struct gpio_desc *gpios[NUM_GPIOS];
/* External master clock frequency */
unsigned long mclk_frequency;
struct clk *clk;
/* Protects the struct fields below */
struct mutex lock;
struct regmap *regmap;
/* Exposure row interval in us */
unsigned int exp_row_interval;
unsigned short id;
const struct ov965x_framesize *frame_size;
/* YUYV sequence (pixel format) control register */
u8 tslb_reg;
struct v4l2_mbus_framefmt format;
struct ov965x_ctrls ctrls;
/* Pointer to frame rate control data structure */
const struct ov965x_interval *fiv;
int streaming;
int power;
u8 apply_frame_fmt;
};
struct i2c_rv {
u8 addr;
u8 value;
};
static const struct i2c_rv ov965x_init_regs[] = {
{ REG_COM2, 0x10 }, /* Set soft sleep mode */
{ REG_COM5, 0x00 }, /* System clock options */
{ REG_COM2, 0x01 }, /* Output drive, soft sleep mode */
{ REG_COM10, 0x00 }, /* Slave mode, HREF vs HSYNC, signals negate */
{ REG_EDGE, 0xa6 }, /* Edge enhancement treshhold and factor */
{ REG_COM16, 0x02 }, /* Color matrix coeff double option */
{ REG_COM17, 0x08 }, /* Single frame out, banding filter */
{ 0x16, 0x06 },
{ REG_CHLF, 0xc0 }, /* Reserved */
{ 0x34, 0xbf },
{ 0xa8, 0x80 },
{ 0x96, 0x04 },
{ 0x8e, 0x00 },
{ REG_COM12, 0x77 }, /* HREF option, UV average */
{ 0x8b, 0x06 },
{ 0x35, 0x91 },
{ 0x94, 0x88 },
{ 0x95, 0x88 },
{ REG_COM15, 0xc1 }, /* Output range, RGB 555/565 */
{ REG_GRCOM, 0x2f }, /* Analog BLC & regulator */
{ REG_COM6, 0x43 }, /* HREF & ADBLC options */
{ REG_COM8, 0xe5 }, /* AGC/AEC options */
{ REG_COM13, 0x90 }, /* Gamma selection, colour matrix, UV delay */
{ REG_HV, 0x80 }, /* Manual banding filter MSB */
{ 0x5c, 0x96 }, /* Reserved up to 0xa5 */
{ 0x5d, 0x96 },
{ 0x5e, 0x10 },
{ 0x59, 0xeb },
{ 0x5a, 0x9c },
{ 0x5b, 0x55 },
{ 0x43, 0xf0 },
{ 0x44, 0x10 },
{ 0x45, 0x55 },
{ 0x46, 0x86 },
{ 0x47, 0x64 },
{ 0x48, 0x86 },
{ 0x5f, 0xe0 },
{ 0x60, 0x8c },
{ 0x61, 0x20 },
{ 0xa5, 0xd9 },
{ 0xa4, 0x74 }, /* reserved */
{ REG_COM23, 0x02 }, /* Color gain analog/_digital_ */
{ REG_COM8, 0xe7 }, /* Enable AEC, AWB, AEC */
{ REG_COM22, 0x23 }, /* Edge enhancement, denoising */
{ 0xa9, 0xb8 },
{ 0xaa, 0x92 },
{ 0xab, 0x0a },
{ REG_DBLC1, 0xdf }, /* Digital BLC */
{ REG_DBLC_B, 0x00 }, /* Digital BLC B chan offset */
{ REG_DBLC_R, 0x00 }, /* Digital BLC R chan offset */
{ REG_DBLC_GB, 0x00 }, /* Digital BLC GB chan offset */
{ REG_DBLC_GR, 0x00 },
{ REG_COM9, 0x3a }, /* Gain ceiling 16x */
{ REG_NULL, 0 }
};
#define NUM_FMT_REGS 14
/*
* COM7, COM3, COM4, HSTART, HSTOP, HREF, VSTART, VSTOP, VREF,
* EXHCH, EXHCL, ADC, OCOM, OFON
*/
static const u8 frame_size_reg_addr[NUM_FMT_REGS] = {
0x12, 0x0c, 0x0d, 0x17, 0x18, 0x32, 0x19, 0x1a, 0x03,
0x2a, 0x2b, 0x37, 0x38, 0x39,
};
static const u8 ov965x_sxga_regs[NUM_FMT_REGS] = {
0x00, 0x00, 0x00, 0x1e, 0xbe, 0xbf, 0x01, 0x81, 0x12,
0x10, 0x34, 0x81, 0x93, 0x51,
};
static const u8 ov965x_vga_regs[NUM_FMT_REGS] = {
0x40, 0x04, 0x80, 0x26, 0xc6, 0xed, 0x01, 0x3d, 0x00,
0x10, 0x40, 0x91, 0x12, 0x43,
};
/* Determined empirically. */
static const u8 ov965x_qvga_regs[NUM_FMT_REGS] = {
0x10, 0x04, 0x80, 0x25, 0xc5, 0xbf, 0x00, 0x80, 0x12,
0x10, 0x40, 0x91, 0x12, 0x43,
};
static const struct ov965x_framesize ov965x_framesizes[] = {
{
.width = SXGA_WIDTH,
.height = SXGA_HEIGHT,
.regs = ov965x_sxga_regs,
.max_exp_lines = 1048,
}, {
.width = VGA_WIDTH,
.height = VGA_HEIGHT,
.regs = ov965x_vga_regs,
.max_exp_lines = 498,
}, {
.width = QVGA_WIDTH,
.height = QVGA_HEIGHT,
.regs = ov965x_qvga_regs,
.max_exp_lines = 248,
},
};
struct ov965x_pixfmt {
u32 code;
u32 colorspace;
/* REG_TSLB value, only bits [3:2] may be set. */
u8 tslb_reg;
};
static const struct ov965x_pixfmt ov965x_formats[] = {
{ MEDIA_BUS_FMT_YUYV8_2X8, V4L2_COLORSPACE_JPEG, 0x00},
{ MEDIA_BUS_FMT_YVYU8_2X8, V4L2_COLORSPACE_JPEG, 0x04},
{ MEDIA_BUS_FMT_UYVY8_2X8, V4L2_COLORSPACE_JPEG, 0x0c},
{ MEDIA_BUS_FMT_VYUY8_2X8, V4L2_COLORSPACE_JPEG, 0x08},
};
/*
* This table specifies possible frame resolution and interval
* combinations. Default CLKRC[5:0] divider values are valid
* only for 24 MHz external clock frequency.
*/
static struct ov965x_interval ov965x_intervals[] = {
{{ 100, 625 }, { SXGA_WIDTH, SXGA_HEIGHT }, 0 }, /* 6.25 fps */
{{ 10, 125 }, { VGA_WIDTH, VGA_HEIGHT }, 1 }, /* 12.5 fps */
{{ 10, 125 }, { QVGA_WIDTH, QVGA_HEIGHT }, 3 }, /* 12.5 fps */
{{ 1, 25 }, { VGA_WIDTH, VGA_HEIGHT }, 0 }, /* 25 fps */
{{ 1, 25 }, { QVGA_WIDTH, QVGA_HEIGHT }, 1 }, /* 25 fps */
};
static inline struct v4l2_subdev *ctrl_to_sd(struct v4l2_ctrl *ctrl)
{
return &container_of(ctrl->handler, struct ov965x, ctrls.handler)->sd;
}
static inline struct ov965x *to_ov965x(struct v4l2_subdev *sd)
{
return container_of(sd, struct ov965x, sd);
}
static int ov965x_read(struct ov965x *ov965x, u8 addr, u8 *val)
{
int ret;
unsigned int buf;
ret = regmap_read(ov965x->regmap, addr, &buf);
if (!ret)
*val = buf;
else
*val = -1;
v4l2_dbg(2, debug, &ov965x->sd, "%s: 0x%02x @ 0x%02x. (%d)\n",
__func__, *val, addr, ret);
return ret;
}
static int ov965x_write(struct ov965x *ov965x, u8 addr, u8 val)
{
int ret;
ret = regmap_write(ov965x->regmap, addr, val);
v4l2_dbg(2, debug, &ov965x->sd, "%s: 0x%02x @ 0x%02X (%d)\n",
__func__, val, addr, ret);
return ret;
}
static int ov965x_write_array(struct ov965x *ov965x,
const struct i2c_rv *regs)
{
int i, ret = 0;
for (i = 0; ret == 0 && regs[i].addr != REG_NULL; i++)
ret = ov965x_write(ov965x, regs[i].addr, regs[i].value);
return ret;
}
static int ov965x_set_default_gamma_curve(struct ov965x *ov965x)
{
static const u8 gamma_curve[] = {
/* Values taken from OV application note. */
0x40, 0x30, 0x4b, 0x60, 0x70, 0x70, 0x70, 0x70,
0x60, 0x60, 0x50, 0x48, 0x3a, 0x2e, 0x28, 0x22,
0x04, 0x07, 0x10, 0x28, 0x36, 0x44, 0x52, 0x60,
0x6c, 0x78, 0x8c, 0x9e, 0xbb, 0xd2, 0xe6
};
u8 addr = REG_GSP;
unsigned int i;
for (i = 0; i < ARRAY_SIZE(gamma_curve); i++) {
int ret = ov965x_write(ov965x, addr, gamma_curve[i]);
if (ret < 0)
return ret;
addr++;
}
return 0;
};
static int ov965x_set_color_matrix(struct ov965x *ov965x)
{
static const u8 mtx[] = {
/* MTX1..MTX9, MTXS */
0x3a, 0x3d, 0x03, 0x12, 0x26, 0x38, 0x40, 0x40, 0x40, 0x0d
};
u8 addr = REG_MTX(1);
unsigned int i;
for (i = 0; i < ARRAY_SIZE(mtx); i++) {
int ret = ov965x_write(ov965x, addr, mtx[i]);
if (ret < 0)
return ret;
addr++;
}
return 0;
}
static int __ov965x_set_power(struct ov965x *ov965x, int on)
{
if (on) {
int ret = clk_prepare_enable(ov965x->clk);
if (ret)
return ret;
gpiod_set_value_cansleep(ov965x->gpios[GPIO_PWDN], 0);
gpiod_set_value_cansleep(ov965x->gpios[GPIO_RST], 0);
msleep(25);
} else {
gpiod_set_value_cansleep(ov965x->gpios[GPIO_RST], 1);
gpiod_set_value_cansleep(ov965x->gpios[GPIO_PWDN], 1);
clk_disable_unprepare(ov965x->clk);
}
ov965x->streaming = 0;
return 0;
}
static int ov965x_s_power(struct v4l2_subdev *sd, int on)
{
struct ov965x *ov965x = to_ov965x(sd);
int ret = 0;
v4l2_dbg(1, debug, sd, "%s: on: %d\n", __func__, on);
mutex_lock(&ov965x->lock);
if (ov965x->power == !on) {
ret = __ov965x_set_power(ov965x, on);
if (!ret && on) {
ret = ov965x_write_array(ov965x,
ov965x_init_regs);
ov965x->apply_frame_fmt = 1;
ov965x->ctrls.update = 1;
}
}
if (!ret)
ov965x->power += on ? 1 : -1;
WARN_ON(ov965x->power < 0);
mutex_unlock(&ov965x->lock);
return ret;
}
/*
* V4L2 controls
*/
static void ov965x_update_exposure_ctrl(struct ov965x *ov965x)
{
struct v4l2_ctrl *ctrl = ov965x->ctrls.exposure;
unsigned long fint, trow;
int min, max, def;
u8 clkrc;
mutex_lock(&ov965x->lock);
if (WARN_ON(!ctrl || !ov965x->frame_size)) {
mutex_unlock(&ov965x->lock);
return;
}
clkrc = DEF_CLKRC + ov965x->fiv->clkrc_div;
/* Calculate internal clock frequency */
fint = ov965x->mclk_frequency * ((clkrc >> 7) + 1) /
((2 * ((clkrc & 0x3f) + 1)));
/* and the row interval (in us). */
trow = (2 * 1520 * 1000000UL) / fint;
max = ov965x->frame_size->max_exp_lines * trow;
ov965x->exp_row_interval = trow;
mutex_unlock(&ov965x->lock);
v4l2_dbg(1, debug, &ov965x->sd, "clkrc: %#x, fi: %lu, tr: %lu, %d\n",
clkrc, fint, trow, max);
/* Update exposure time range to match current frame format. */
min = (trow + 100) / 100;
max = (max - 100) / 100;
def = min + (max - min) / 2;
if (v4l2_ctrl_modify_range(ctrl, min, max, 1, def))
v4l2_err(&ov965x->sd, "Exposure ctrl range update failed\n");
}
static int ov965x_set_banding_filter(struct ov965x *ov965x, int value)
{
unsigned long mbd, light_freq;
int ret;
u8 reg;
ret = ov965x_read(ov965x, REG_COM8, &reg);
if (!ret) {
if (value == V4L2_CID_POWER_LINE_FREQUENCY_DISABLED)
reg &= ~COM8_BFILT;
else
reg |= COM8_BFILT;
ret = ov965x_write(ov965x, REG_COM8, reg);
}
if (value == V4L2_CID_POWER_LINE_FREQUENCY_DISABLED)
return 0;
if (WARN_ON(!ov965x->fiv))
return -EINVAL;
/* Set minimal exposure time for 50/60 HZ lighting */
if (value == V4L2_CID_POWER_LINE_FREQUENCY_50HZ)
light_freq = 50;
else
light_freq = 60;
mbd = (1000UL * ov965x->fiv->interval.denominator *
ov965x->frame_size->max_exp_lines) /
ov965x->fiv->interval.numerator;
mbd = ((mbd / (light_freq * 2)) + 500) / 1000UL;
return ov965x_write(ov965x, REG_MBD, mbd);
}
static int ov965x_set_white_balance(struct ov965x *ov965x, int awb)
{
int ret;
u8 reg;
ret = ov965x_read(ov965x, REG_COM8, &reg);
if (!ret) {
reg = awb ? reg | REG_COM8 : reg & ~REG_COM8;
ret = ov965x_write(ov965x, REG_COM8, reg);
}
if (!ret && !awb) {
ret = ov965x_write(ov965x, REG_BLUE,
ov965x->ctrls.blue_balance->val);
if (ret < 0)
return ret;
ret = ov965x_write(ov965x, REG_RED,
ov965x->ctrls.red_balance->val);
}
return ret;
}
#define NUM_BR_LEVELS 7
#define NUM_BR_REGS 3
static int ov965x_set_brightness(struct ov965x *ov965x, int val)
{
static const u8 regs[NUM_BR_LEVELS + 1][NUM_BR_REGS] = {
{ REG_AEW, REG_AEB, REG_VPT },
{ 0x1c, 0x12, 0x50 }, /* -3 */
{ 0x3d, 0x30, 0x71 }, /* -2 */
{ 0x50, 0x44, 0x92 }, /* -1 */
{ 0x70, 0x64, 0xc3 }, /* 0 */
{ 0x90, 0x84, 0xd4 }, /* +1 */
{ 0xc4, 0xbf, 0xf9 }, /* +2 */
{ 0xd8, 0xd0, 0xfa }, /* +3 */
};
int i, ret = 0;
val += (NUM_BR_LEVELS / 2 + 1);
if (val > NUM_BR_LEVELS)
return -EINVAL;
for (i = 0; i < NUM_BR_REGS && !ret; i++)
ret = ov965x_write(ov965x, regs[0][i],
regs[val][i]);
return ret;
}
static int ov965x_set_gain(struct ov965x *ov965x, int auto_gain)
{
struct ov965x_ctrls *ctrls = &ov965x->ctrls;
int ret = 0;
u8 reg;
/*
* For manual mode we need to disable AGC first, so
* gain value in REG_VREF, REG_GAIN is not overwritten.
*/
if (ctrls->auto_gain->is_new) {
ret = ov965x_read(ov965x, REG_COM8, &reg);
if (ret < 0)
return ret;
if (ctrls->auto_gain->val)
reg |= COM8_AGC;
else
reg &= ~COM8_AGC;
ret = ov965x_write(ov965x, REG_COM8, reg);
if (ret < 0)
return ret;
}
if (ctrls->gain->is_new && !auto_gain) {
unsigned int gain = ctrls->gain->val;
unsigned int rgain;
int m;
/*
* Convert gain control value to the sensor's gain
* registers (VREF[7:6], GAIN[7:0]) format.
*/
for (m = 6; m >= 0; m--)
if (gain >= (1 << m) * 16)
break;
/* Sanity check: don't adjust the gain with a negative value */
if (m < 0)
return -EINVAL;
rgain = (gain - ((1 << m) * 16)) / (1 << m);
rgain |= (((1 << m) - 1) << 4);
ret = ov965x_write(ov965x, REG_GAIN, rgain & 0xff);
if (ret < 0)
return ret;
ret = ov965x_read(ov965x, REG_VREF, &reg);
if (ret < 0)
return ret;
reg &= ~VREF_GAIN_MASK;
reg |= (((rgain >> 8) & 0x3) << 6);
ret = ov965x_write(ov965x, REG_VREF, reg);
if (ret < 0)
return ret;
/* Return updated control's value to userspace */
ctrls->gain->val = (1 << m) * (16 + (rgain & 0xf));
}
return ret;
}
static int ov965x_set_sharpness(struct ov965x *ov965x, unsigned int value)
{
u8 com14, edge;
int ret;
ret = ov965x_read(ov965x, REG_COM14, &com14);
if (ret < 0)
return ret;
ret = ov965x_read(ov965x, REG_EDGE, &edge);
if (ret < 0)
return ret;
com14 = value ? com14 | COM14_EDGE_EN : com14 & ~COM14_EDGE_EN;
value--;
if (value > 0x0f) {
com14 |= COM14_EEF_X2;
value >>= 1;
} else {
com14 &= ~COM14_EEF_X2;
}
ret = ov965x_write(ov965x, REG_COM14, com14);
if (ret < 0)
return ret;
edge &= ~EDGE_FACTOR_MASK;
edge |= ((u8)value & 0x0f);
return ov965x_write(ov965x, REG_EDGE, edge);
}
static int ov965x_set_exposure(struct ov965x *ov965x, int exp)
{
struct ov965x_ctrls *ctrls = &ov965x->ctrls;
bool auto_exposure = (exp == V4L2_EXPOSURE_AUTO);
int ret;
u8 reg;
if (ctrls->auto_exp->is_new) {
ret = ov965x_read(ov965x, REG_COM8, &reg);
if (ret < 0)
return ret;
if (auto_exposure)
reg |= (COM8_AEC | COM8_AGC);
else
reg &= ~(COM8_AEC | COM8_AGC);
ret = ov965x_write(ov965x, REG_COM8, reg);
if (ret < 0)
return ret;
}
if (!auto_exposure && ctrls->exposure->is_new) {
unsigned int exposure = (ctrls->exposure->val * 100)
/ ov965x->exp_row_interval;
/*
* Manual exposure value
* [b15:b0] - AECHM (b15:b10), AECH (b9:b2), COM1 (b1:b0)
*/
ret = ov965x_write(ov965x, REG_COM1, exposure & 0x3);
if (!ret)
ret = ov965x_write(ov965x, REG_AECH,
(exposure >> 2) & 0xff);
if (!ret)
ret = ov965x_write(ov965x, REG_AECHM,
(exposure >> 10) & 0x3f);
/* Update the value to minimize rounding errors */
ctrls->exposure->val = ((exposure * ov965x->exp_row_interval)
+ 50) / 100;
if (ret < 0)
return ret;
}
v4l2_ctrl_activate(ov965x->ctrls.brightness, !exp);
return 0;
}
static int ov965x_set_flip(struct ov965x *ov965x)
{
u8 mvfp = 0;
if (ov965x->ctrls.hflip->val)
mvfp |= MVFP_MIRROR;
if (ov965x->ctrls.vflip->val)
mvfp |= MVFP_FLIP;
return ov965x_write(ov965x, REG_MVFP, mvfp);
}
#define NUM_SAT_LEVELS 5
#define NUM_SAT_REGS 6
static int ov965x_set_saturation(struct ov965x *ov965x, int val)
{
static const u8 regs[NUM_SAT_LEVELS][NUM_SAT_REGS] = {
/* MTX(1)...MTX(6) */
{ 0x1d, 0x1f, 0x02, 0x09, 0x13, 0x1c }, /* -2 */
{ 0x2e, 0x31, 0x02, 0x0e, 0x1e, 0x2d }, /* -1 */
{ 0x3a, 0x3d, 0x03, 0x12, 0x26, 0x38 }, /* 0 */
{ 0x46, 0x49, 0x04, 0x16, 0x2e, 0x43 }, /* +1 */
{ 0x57, 0x5c, 0x05, 0x1b, 0x39, 0x54 }, /* +2 */
};
u8 addr = REG_MTX(1);
int i, ret = 0;
val += (NUM_SAT_LEVELS / 2);
if (val >= NUM_SAT_LEVELS)
return -EINVAL;
for (i = 0; i < NUM_SAT_REGS && !ret; i++)
ret = ov965x_write(ov965x, addr + i, regs[val][i]);
return ret;
}
static int ov965x_set_test_pattern(struct ov965x *ov965x, int value)
{
int ret;
u8 reg;
ret = ov965x_read(ov965x, REG_COM23, &reg);
if (ret < 0)
return ret;
reg = value ? reg | COM23_TEST_MODE : reg & ~COM23_TEST_MODE;
return ov965x_write(ov965x, REG_COM23, reg);
}
static int __g_volatile_ctrl(struct ov965x *ov965x, struct v4l2_ctrl *ctrl)
{
unsigned int exposure, gain, m;
u8 reg0, reg1, reg2;
int ret;
if (!ov965x->power)
return 0;
switch (ctrl->id) {
case V4L2_CID_AUTOGAIN:
if (!ctrl->val)
return 0;
ret = ov965x_read(ov965x, REG_GAIN, &reg0);
if (ret < 0)
return ret;
ret = ov965x_read(ov965x, REG_VREF, &reg1);
if (ret < 0)
return ret;
gain = ((reg1 >> 6) << 8) | reg0;
m = 0x01 << fls(gain >> 4);
ov965x->ctrls.gain->val = m * (16 + (gain & 0xf));
break;
case V4L2_CID_EXPOSURE_AUTO:
if (ctrl->val == V4L2_EXPOSURE_MANUAL)
return 0;
ret = ov965x_read(ov965x, REG_COM1, &reg0);
if (ret < 0)
return ret;
ret = ov965x_read(ov965x, REG_AECH, &reg1);
if (ret < 0)
return ret;
ret = ov965x_read(ov965x, REG_AECHM, &reg2);
if (ret < 0)
return ret;
exposure = ((reg2 & 0x3f) << 10) | (reg1 << 2) |
(reg0 & 0x3);
ov965x->ctrls.exposure->val = ((exposure *
ov965x->exp_row_interval) + 50) / 100;
break;
}
return 0;
}
static int ov965x_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
{
struct v4l2_subdev *sd = ctrl_to_sd(ctrl);
struct ov965x *ov965x = to_ov965x(sd);
int ret;
v4l2_dbg(1, debug, sd, "g_ctrl: %s\n", ctrl->name);
mutex_lock(&ov965x->lock);
ret = __g_volatile_ctrl(ov965x, ctrl);
mutex_unlock(&ov965x->lock);
return ret;
}
static int ov965x_s_ctrl(struct v4l2_ctrl *ctrl)
{
struct v4l2_subdev *sd = ctrl_to_sd(ctrl);
struct ov965x *ov965x = to_ov965x(sd);
int ret = -EINVAL;
v4l2_dbg(1, debug, sd, "s_ctrl: %s, value: %d. power: %d\n",
ctrl->name, ctrl->val, ov965x->power);
mutex_lock(&ov965x->lock);
/*
* If the device is not powered up now postpone applying control's
* value to the hardware, until it is ready to accept commands.
*/
if (ov965x->power == 0) {
mutex_unlock(&ov965x->lock);
return 0;
}
switch (ctrl->id) {
case V4L2_CID_AUTO_WHITE_BALANCE:
ret = ov965x_set_white_balance(ov965x, ctrl->val);
break;
case V4L2_CID_BRIGHTNESS:
ret = ov965x_set_brightness(ov965x, ctrl->val);
break;
case V4L2_CID_EXPOSURE_AUTO:
ret = ov965x_set_exposure(ov965x, ctrl->val);
break;
case V4L2_CID_AUTOGAIN:
ret = ov965x_set_gain(ov965x, ctrl->val);
break;
case V4L2_CID_HFLIP:
ret = ov965x_set_flip(ov965x);
break;
case V4L2_CID_POWER_LINE_FREQUENCY:
ret = ov965x_set_banding_filter(ov965x, ctrl->val);
break;
case V4L2_CID_SATURATION:
ret = ov965x_set_saturation(ov965x, ctrl->val);
break;
case V4L2_CID_SHARPNESS:
ret = ov965x_set_sharpness(ov965x, ctrl->val);
break;
case V4L2_CID_TEST_PATTERN:
ret = ov965x_set_test_pattern(ov965x, ctrl->val);
break;
}
mutex_unlock(&ov965x->lock);
return ret;
}
static const struct v4l2_ctrl_ops ov965x_ctrl_ops = {
.g_volatile_ctrl = ov965x_g_volatile_ctrl,
.s_ctrl = ov965x_s_ctrl,
};
static const char * const test_pattern_menu[] = {
"Disabled",
"Color bars",
};
static int ov965x_initialize_controls(struct ov965x *ov965x)
{
const struct v4l2_ctrl_ops *ops = &ov965x_ctrl_ops;
struct ov965x_ctrls *ctrls = &ov965x->ctrls;
struct v4l2_ctrl_handler *hdl = &ctrls->handler;
int ret;
ret = v4l2_ctrl_handler_init(hdl, 16);
if (ret < 0)
return ret;
/* Auto/manual white balance */
ctrls->auto_wb = v4l2_ctrl_new_std(hdl, ops,
V4L2_CID_AUTO_WHITE_BALANCE,
0, 1, 1, 1);
ctrls->blue_balance = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BLUE_BALANCE,
0, 0xff, 1, 0x80);
ctrls->red_balance = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_RED_BALANCE,
0, 0xff, 1, 0x80);
/* Auto/manual exposure */
ctrls->auto_exp =
v4l2_ctrl_new_std_menu(hdl, ops,
V4L2_CID_EXPOSURE_AUTO,
V4L2_EXPOSURE_MANUAL, 0,
V4L2_EXPOSURE_AUTO);
/* Exposure time, in 100 us units. min/max is updated dynamically. */
ctrls->exposure = v4l2_ctrl_new_std(hdl, ops,
V4L2_CID_EXPOSURE_ABSOLUTE,
2, 1500, 1, 500);
/* Auto/manual gain */
ctrls->auto_gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_AUTOGAIN,
0, 1, 1, 1);
ctrls->gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_GAIN,
16, 64 * (16 + 15), 1, 64 * 16);
ctrls->saturation = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SATURATION,
-2, 2, 1, 0);
ctrls->brightness = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BRIGHTNESS,
-3, 3, 1, 0);
ctrls->sharpness = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SHARPNESS,
0, 32, 1, 6);
ctrls->hflip = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_HFLIP, 0, 1, 1, 0);
ctrls->vflip = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_VFLIP, 0, 1, 1, 0);
ctrls->light_freq =
v4l2_ctrl_new_std_menu(hdl, ops,
V4L2_CID_POWER_LINE_FREQUENCY,
V4L2_CID_POWER_LINE_FREQUENCY_60HZ, ~0x7,
V4L2_CID_POWER_LINE_FREQUENCY_50HZ);
v4l2_ctrl_new_std_menu_items(hdl, ops, V4L2_CID_TEST_PATTERN,
ARRAY_SIZE(test_pattern_menu) - 1, 0, 0,
test_pattern_menu);
if (hdl->error) {
ret = hdl->error;
v4l2_ctrl_handler_free(hdl);
return ret;
}
ctrls->gain->flags |= V4L2_CTRL_FLAG_VOLATILE;
ctrls->exposure->flags |= V4L2_CTRL_FLAG_VOLATILE;
v4l2_ctrl_auto_cluster(3, &ctrls->auto_wb, 0, false);
v4l2_ctrl_auto_cluster(2, &ctrls->auto_gain, 0, true);
v4l2_ctrl_auto_cluster(2, &ctrls->auto_exp, 1, true);
v4l2_ctrl_cluster(2, &ctrls->hflip);
ov965x->sd.ctrl_handler = hdl;
return 0;
}
/*
* V4L2 subdev video and pad level operations
*/
static void ov965x_get_default_format(struct v4l2_mbus_framefmt *mf)
{
mf->width = ov965x_framesizes[0].width;
mf->height = ov965x_framesizes[0].height;
mf->colorspace = ov965x_formats[0].colorspace;
mf->code = ov965x_formats[0].code;
mf->field = V4L2_FIELD_NONE;
}
static int ov965x_enum_mbus_code(struct v4l2_subdev *sd,
media: v4l2-subdev: add subdev-wide state struct We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 14:55:58 +00:00
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_mbus_code_enum *code)
{
if (code->index >= ARRAY_SIZE(ov965x_formats))
return -EINVAL;
code->code = ov965x_formats[code->index].code;
return 0;
}
static int ov965x_enum_frame_sizes(struct v4l2_subdev *sd,
media: v4l2-subdev: add subdev-wide state struct We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 14:55:58 +00:00
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_frame_size_enum *fse)
{
int i = ARRAY_SIZE(ov965x_formats);
if (fse->index >= ARRAY_SIZE(ov965x_framesizes))
return -EINVAL;
while (--i)
if (fse->code == ov965x_formats[i].code)
break;
fse->code = ov965x_formats[i].code;
fse->min_width = ov965x_framesizes[fse->index].width;
fse->max_width = fse->min_width;
fse->max_height = ov965x_framesizes[fse->index].height;
fse->min_height = fse->max_height;
return 0;
}
static int ov965x_get_frame_interval(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_frame_interval *fi)
{
struct ov965x *ov965x = to_ov965x(sd);
/*
* FIXME: Implement support for V4L2_SUBDEV_FORMAT_TRY, using the V4L2
* subdev active state API.
*/
if (fi->which != V4L2_SUBDEV_FORMAT_ACTIVE)
return -EINVAL;
mutex_lock(&ov965x->lock);
fi->interval = ov965x->fiv->interval;
mutex_unlock(&ov965x->lock);
return 0;
}
static int __ov965x_set_frame_interval(struct ov965x *ov965x,
struct v4l2_subdev_frame_interval *fi)
{
struct v4l2_mbus_framefmt *mbus_fmt = &ov965x->format;
const struct ov965x_interval *fiv = &ov965x_intervals[0];
u64 req_int, err, min_err = ~0ULL;
unsigned int i;
if (fi->interval.denominator == 0)
return -EINVAL;
req_int = (u64)fi->interval.numerator * 10000;
do_div(req_int, fi->interval.denominator);
for (i = 0; i < ARRAY_SIZE(ov965x_intervals); i++) {
const struct ov965x_interval *iv = &ov965x_intervals[i];
if (mbus_fmt->width != iv->size.width ||
mbus_fmt->height != iv->size.height)
continue;
err = abs((u64)(iv->interval.numerator * 10000) /
iv->interval.denominator - req_int);
if (err < min_err) {
fiv = iv;
min_err = err;
}
}
ov965x->fiv = fiv;
v4l2_dbg(1, debug, &ov965x->sd, "Changed frame interval to %u us\n",
fiv->interval.numerator * 1000000 / fiv->interval.denominator);
return 0;
}
static int ov965x_set_frame_interval(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_frame_interval *fi)
{
struct ov965x *ov965x = to_ov965x(sd);
int ret;
/*
* FIXME: Implement support for V4L2_SUBDEV_FORMAT_TRY, using the V4L2
* subdev active state API.
*/
if (fi->which != V4L2_SUBDEV_FORMAT_ACTIVE)
return -EINVAL;
v4l2_dbg(1, debug, sd, "Setting %d/%d frame interval\n",
fi->interval.numerator, fi->interval.denominator);
mutex_lock(&ov965x->lock);
ret = __ov965x_set_frame_interval(ov965x, fi);
ov965x->apply_frame_fmt = 1;
mutex_unlock(&ov965x->lock);
return ret;
}
static int ov965x_get_fmt(struct v4l2_subdev *sd,
media: v4l2-subdev: add subdev-wide state struct We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 14:55:58 +00:00
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_format *fmt)
{
struct ov965x *ov965x = to_ov965x(sd);
struct v4l2_mbus_framefmt *mf;
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
media: v4l: subdev: Switch to stream-aware state functions Switch all drivers accessing sub-device state to use the stream-aware functions. We will soon remove the old ones. This patch has been generated using the following Coccinelle script: ---------8<------------ @@ expression E1, E2, E3; @@ - v4l2_subdev_get_pad_format(E1, E2, E3) + v4l2_subdev_state_get_format(E2, E3) @@ expression E1, E2, E3; @@ - v4l2_subdev_get_pad_crop(E1, E2, E3) + v4l2_subdev_state_get_crop(E2, E3) @@ expression E1, E2, E3; @@ - v4l2_subdev_get_pad_compose(E1, E2, E3) + v4l2_subdev_state_get_compose(E2, E3) @@ expression E1, E2, E3; @@ - v4l2_subdev_get_try_format(E1, E2, E3) + v4l2_subdev_state_get_format(E2, E3) @@ expression E1, E2, E3; @@ - v4l2_subdev_get_try_crop(E1, E2, E3) + v4l2_subdev_state_get_crop(E2, E3) @@ expression E1, E2, E3; @@ - v4l2_subdev_get_try_compose(E1, E2, E3) + v4l2_subdev_state_get_compose(E2, E3) ---------8<------------ Additionally drivers/media/i2c/s5k5baf.c and drivers/media/platform/samsung/s3c-camif/camif-capture.c have been manually changed as Coccinelle didn't. Further local variables have been removed as they became unused as a result of the other changes. Also Coccinelle introduced indentation by space in files drivers/media/i2c/st-mipid02.c and drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c. This has been also corrected. The diff from Coccinelle-generated changes are: > diff --git b/drivers/media/i2c/imx319.c a/drivers/media/i2c/imx319.c > index e549692ff478..420984382173 100644 > --- b/drivers/media/i2c/imx319.c > +++ a/drivers/media/i2c/imx319.c > @@ -2001,7 +2001,6 @@ static int imx319_do_get_pad_format(struct imx319 *imx319, > struct v4l2_subdev_format *fmt) > { > struct v4l2_mbus_framefmt *framefmt; > - struct v4l2_subdev *sd = &imx319->sd; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); > diff --git b/drivers/media/i2c/imx355.c a/drivers/media/i2c/imx355.c > index 96bdde685d65..e1b1d2fc79dd 100644 > --- b/drivers/media/i2c/imx355.c > +++ a/drivers/media/i2c/imx355.c > @@ -1299,7 +1299,6 @@ static int imx355_do_get_pad_format(struct imx355 *imx355, > struct v4l2_subdev_format *fmt) > { > struct v4l2_mbus_framefmt *framefmt; > - struct v4l2_subdev *sd = &imx355->sd; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); > diff --git b/drivers/media/i2c/ov08x40.c a/drivers/media/i2c/ov08x40.c > index ca799bbcfdb7..abbb0b774d43 100644 > --- b/drivers/media/i2c/ov08x40.c > +++ a/drivers/media/i2c/ov08x40.c > @@ -2774,7 +2774,6 @@ static int ov08x40_do_get_pad_format(struct ov08x40 *ov08x, > struct v4l2_subdev_format *fmt) > { > struct v4l2_mbus_framefmt *framefmt; > - struct v4l2_subdev *sd = &ov08x->sd; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); > diff --git b/drivers/media/i2c/ov13858.c a/drivers/media/i2c/ov13858.c > index 7816d9787c61..09387e335d80 100644 > --- b/drivers/media/i2c/ov13858.c > +++ a/drivers/media/i2c/ov13858.c > @@ -1316,7 +1316,6 @@ static int ov13858_do_get_pad_format(struct ov13858 *ov13858, > struct v4l2_subdev_format *fmt) > { > struct v4l2_mbus_framefmt *framefmt; > - struct v4l2_subdev *sd = &ov13858->sd; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); > diff --git b/drivers/media/i2c/ov13b10.c a/drivers/media/i2c/ov13b10.c > index 268cd4b03f9c..c06411d5ee2b 100644 > --- b/drivers/media/i2c/ov13b10.c > +++ a/drivers/media/i2c/ov13b10.c > @@ -1001,7 +1001,6 @@ static int ov13b10_do_get_pad_format(struct ov13b10 *ov13b, > struct v4l2_subdev_format *fmt) > { > struct v4l2_mbus_framefmt *framefmt; > - struct v4l2_subdev *sd = &ov13b->sd; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); > diff --git b/drivers/media/i2c/s5c73m3/s5c73m3-core.c a/drivers/media/i2c/s5c73m3/s5c73m3-core.c > index 47605e36bc60..8f9b5713daf7 100644 > --- b/drivers/media/i2c/s5c73m3/s5c73m3-core.c > +++ a/drivers/media/i2c/s5c73m3/s5c73m3-core.c > @@ -819,7 +819,6 @@ static void s5c73m3_oif_try_format(struct s5c73m3 *state, > struct v4l2_subdev_format *fmt, > const struct s5c73m3_frame_size **fs) > { > - struct v4l2_subdev *sd = &state->sensor_sd; > u32 code; > > switch (fmt->pad) { > diff --git a/drivers/media/i2c/s5k5baf.c b/drivers/media/i2c/s5k5baf.c > index 67da2045f543..03ccfb0e1e11 100644 > --- a/drivers/media/i2c/s5k5baf.c > +++ b/drivers/media/i2c/s5k5baf.c > @@ -1472,14 +1472,11 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, > > if (sel->which == V4L2_SUBDEV_FORMAT_TRY) { > rects = (struct v4l2_rect * []) { > - &s5k5baf_cis_rect, > - v4l2_subdev_get_try_crop(sd, sd_state, > - PAD_CIS), > - v4l2_subdev_get_try_compose(sd, sd_state, > - PAD_CIS), > - v4l2_subdev_get_try_crop(sd, sd_state, > - PAD_OUT) > - }; > + &s5k5baf_cis_rect, > + v4l2_subdev_state_get_crop(sd_state, PAD_CIS), > + v4l2_subdev_state_get_compose(sd_state, PAD_CIS), > + v4l2_subdev_state_get_crop(sd_state, PAD_OUT) > + }; > s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); > return 0; > } > diff --git b/drivers/media/platform/samsung/s3c-camif/camif-capture.c a/drivers/media/platform/samsung/s3c-camif/camif-capture.c > index 295e083f38e8..be58260ea67e 100644 > --- b/drivers/media/platform/samsung/s3c-camif/camif-capture.c > +++ a/drivers/media/platform/samsung/s3c-camif/camif-capture.c > @@ -1216,7 +1216,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, > struct v4l2_mbus_framefmt *mf = &fmt->format; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > - mf = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad); > + mf = v4l2_subdev_state_get_format(sd_state, fmt->pad); > fmt->format = *mf; > return 0; > } > @@ -1305,7 +1305,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, > __camif_subdev_try_format(camif, mf, fmt->pad); > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > - mf = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad); > + mf = v4l2_subdev_state_get_format(sd_state, fmt->pad); > *mf = fmt->format; > mutex_unlock(&camif->lock); > return 0; > diff --git b/drivers/media/platform/ti/cal/cal-camerarx.c a/drivers/media/platform/ti/cal/cal-camerarx.c > index cea454ed9c20..61433744c6c4 100644 > --- b/drivers/media/platform/ti/cal/cal-camerarx.c > +++ a/drivers/media/platform/ti/cal/cal-camerarx.c > @@ -621,8 +621,6 @@ static int cal_camerarx_sd_enum_mbus_code(struct v4l2_subdev *sd, > struct v4l2_subdev_state *state, > struct v4l2_subdev_mbus_code_enum *code) > { > - struct cal_camerarx *phy = to_cal_camerarx(sd); > - > /* No transcoding, source and sink codes must match. */ > if (cal_rx_pad_is_source(code->pad)) { > struct v4l2_mbus_framefmt *fmt; > diff --git b/drivers/staging/media/imx/imx-ic-prp.c a/drivers/staging/media/imx/imx-ic-prp.c > index dd558fac6477..61d69f19657e 100644 > --- b/drivers/staging/media/imx/imx-ic-prp.c > +++ a/drivers/staging/media/imx/imx-ic-prp.c > @@ -82,8 +82,6 @@ static struct v4l2_mbus_framefmt * > __prp_get_fmt(struct prp_priv *priv, struct v4l2_subdev_state *sd_state, > unsigned int pad, enum v4l2_subdev_format_whence which) > { > - struct imx_ic_priv *ic_priv = priv->ic_priv; > - > if (which == V4L2_SUBDEV_FORMAT_TRY) > return v4l2_subdev_state_get_format(sd_state, pad); > else > diff --git b/drivers/staging/media/imx/imx-ic-prpencvf.c a/drivers/staging/media/imx/imx-ic-prpencvf.c > index 02db7dbb884b..ec73c901079e 100644 > --- b/drivers/staging/media/imx/imx-ic-prpencvf.c > +++ a/drivers/staging/media/imx/imx-ic-prpencvf.c > @@ -790,8 +790,6 @@ static struct v4l2_mbus_framefmt * > __prp_get_fmt(struct prp_priv *priv, struct v4l2_subdev_state *sd_state, > unsigned int pad, enum v4l2_subdev_format_whence which) > { > - struct imx_ic_priv *ic_priv = priv->ic_priv; > - > if (which == V4L2_SUBDEV_FORMAT_TRY) > return v4l2_subdev_state_get_format(sd_state, pad); > else > diff --git a/drivers/media/i2c/st-mipid02.c b/drivers/media/i2c/st-mipid02.c > index 9c9361354c00..b08a249b5fdd 100644 > --- a/drivers/media/i2c/st-mipid02.c > +++ b/drivers/media/i2c/st-mipid02.c > @@ -751,7 +751,7 @@ static void mipid02_set_fmt_source(struct v4l2_subdev *sd, > format->format = bridge->fmt; > else > format->format = *v4l2_subdev_state_get_format(sd_state, > - MIPID02_SINK_0); > + MIPID02_SINK_0); > > /* but code may need to be converted */ > format->format.code = serial_to_parallel_code(format->format.code); > diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c b/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c > index 117912d3bfbd..96353648c032 100644 > --- a/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c > +++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c > @@ -319,7 +319,7 @@ static void rkisp1_isp_start(struct rkisp1_isp *isp, > rkisp1_write(rkisp1, RKISP1_CIF_ISP_CTRL, val); > > src_fmt = v4l2_subdev_state_get_format(sd_state, > - RKISP1_ISP_PAD_SOURCE_VIDEO); > + RKISP1_ISP_PAD_SOURCE_VIDEO); > src_info = rkisp1_mbus_info_get_by_code(src_fmt->code); > > if (src_info->pixel_enc != V4L2_PIXEL_ENC_BAYER) > @@ -475,9 +475,9 @@ static void rkisp1_isp_set_src_fmt(struct rkisp1_isp *isp, > sink_fmt = v4l2_subdev_state_get_format(sd_state, > RKISP1_ISP_PAD_SINK_VIDEO); > src_fmt = v4l2_subdev_state_get_format(sd_state, > - RKISP1_ISP_PAD_SOURCE_VIDEO); > + RKISP1_ISP_PAD_SOURCE_VIDEO); > src_crop = v4l2_subdev_state_get_crop(sd_state, > - RKISP1_ISP_PAD_SOURCE_VIDEO); > + RKISP1_ISP_PAD_SOURCE_VIDEO); > > /* > * Media bus code. The ISP can operate in pass-through mode (Bayer in, Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-10-13 07:37:10 +00:00
mf = v4l2_subdev_state_get_format(sd_state, 0);
fmt->format = *mf;
return 0;
}
mutex_lock(&ov965x->lock);
fmt->format = ov965x->format;
mutex_unlock(&ov965x->lock);
return 0;
}
static void __ov965x_try_frame_size(struct v4l2_mbus_framefmt *mf,
const struct ov965x_framesize **size)
{
const struct ov965x_framesize *fsize = &ov965x_framesizes[0],
*match = NULL;
int i = ARRAY_SIZE(ov965x_framesizes);
unsigned int min_err = UINT_MAX;
while (i--) {
int err = abs(fsize->width - mf->width)
+ abs(fsize->height - mf->height);
if (err < min_err) {
min_err = err;
match = fsize;
}
fsize++;
}
if (!match)
match = &ov965x_framesizes[0];
mf->width = match->width;
mf->height = match->height;
if (size)
*size = match;
}
static int ov965x_set_fmt(struct v4l2_subdev *sd,
media: v4l2-subdev: add subdev-wide state struct We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 14:55:58 +00:00
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_format *fmt)
{
unsigned int index = ARRAY_SIZE(ov965x_formats);
struct v4l2_mbus_framefmt *mf = &fmt->format;
struct ov965x *ov965x = to_ov965x(sd);
const struct ov965x_framesize *size = NULL;
int ret = 0;
__ov965x_try_frame_size(mf, &size);
while (--index)
if (ov965x_formats[index].code == mf->code)
break;
mf->colorspace = V4L2_COLORSPACE_JPEG;
mf->code = ov965x_formats[index].code;
mf->field = V4L2_FIELD_NONE;
mutex_lock(&ov965x->lock);
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
media: v4l2-subdev: add subdev-wide state struct We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 14:55:58 +00:00
if (sd_state) {
media: v4l: subdev: Switch to stream-aware state functions Switch all drivers accessing sub-device state to use the stream-aware functions. We will soon remove the old ones. This patch has been generated using the following Coccinelle script: ---------8<------------ @@ expression E1, E2, E3; @@ - v4l2_subdev_get_pad_format(E1, E2, E3) + v4l2_subdev_state_get_format(E2, E3) @@ expression E1, E2, E3; @@ - v4l2_subdev_get_pad_crop(E1, E2, E3) + v4l2_subdev_state_get_crop(E2, E3) @@ expression E1, E2, E3; @@ - v4l2_subdev_get_pad_compose(E1, E2, E3) + v4l2_subdev_state_get_compose(E2, E3) @@ expression E1, E2, E3; @@ - v4l2_subdev_get_try_format(E1, E2, E3) + v4l2_subdev_state_get_format(E2, E3) @@ expression E1, E2, E3; @@ - v4l2_subdev_get_try_crop(E1, E2, E3) + v4l2_subdev_state_get_crop(E2, E3) @@ expression E1, E2, E3; @@ - v4l2_subdev_get_try_compose(E1, E2, E3) + v4l2_subdev_state_get_compose(E2, E3) ---------8<------------ Additionally drivers/media/i2c/s5k5baf.c and drivers/media/platform/samsung/s3c-camif/camif-capture.c have been manually changed as Coccinelle didn't. Further local variables have been removed as they became unused as a result of the other changes. Also Coccinelle introduced indentation by space in files drivers/media/i2c/st-mipid02.c and drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c. This has been also corrected. The diff from Coccinelle-generated changes are: > diff --git b/drivers/media/i2c/imx319.c a/drivers/media/i2c/imx319.c > index e549692ff478..420984382173 100644 > --- b/drivers/media/i2c/imx319.c > +++ a/drivers/media/i2c/imx319.c > @@ -2001,7 +2001,6 @@ static int imx319_do_get_pad_format(struct imx319 *imx319, > struct v4l2_subdev_format *fmt) > { > struct v4l2_mbus_framefmt *framefmt; > - struct v4l2_subdev *sd = &imx319->sd; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); > diff --git b/drivers/media/i2c/imx355.c a/drivers/media/i2c/imx355.c > index 96bdde685d65..e1b1d2fc79dd 100644 > --- b/drivers/media/i2c/imx355.c > +++ a/drivers/media/i2c/imx355.c > @@ -1299,7 +1299,6 @@ static int imx355_do_get_pad_format(struct imx355 *imx355, > struct v4l2_subdev_format *fmt) > { > struct v4l2_mbus_framefmt *framefmt; > - struct v4l2_subdev *sd = &imx355->sd; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); > diff --git b/drivers/media/i2c/ov08x40.c a/drivers/media/i2c/ov08x40.c > index ca799bbcfdb7..abbb0b774d43 100644 > --- b/drivers/media/i2c/ov08x40.c > +++ a/drivers/media/i2c/ov08x40.c > @@ -2774,7 +2774,6 @@ static int ov08x40_do_get_pad_format(struct ov08x40 *ov08x, > struct v4l2_subdev_format *fmt) > { > struct v4l2_mbus_framefmt *framefmt; > - struct v4l2_subdev *sd = &ov08x->sd; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); > diff --git b/drivers/media/i2c/ov13858.c a/drivers/media/i2c/ov13858.c > index 7816d9787c61..09387e335d80 100644 > --- b/drivers/media/i2c/ov13858.c > +++ a/drivers/media/i2c/ov13858.c > @@ -1316,7 +1316,6 @@ static int ov13858_do_get_pad_format(struct ov13858 *ov13858, > struct v4l2_subdev_format *fmt) > { > struct v4l2_mbus_framefmt *framefmt; > - struct v4l2_subdev *sd = &ov13858->sd; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); > diff --git b/drivers/media/i2c/ov13b10.c a/drivers/media/i2c/ov13b10.c > index 268cd4b03f9c..c06411d5ee2b 100644 > --- b/drivers/media/i2c/ov13b10.c > +++ a/drivers/media/i2c/ov13b10.c > @@ -1001,7 +1001,6 @@ static int ov13b10_do_get_pad_format(struct ov13b10 *ov13b, > struct v4l2_subdev_format *fmt) > { > struct v4l2_mbus_framefmt *framefmt; > - struct v4l2_subdev *sd = &ov13b->sd; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); > diff --git b/drivers/media/i2c/s5c73m3/s5c73m3-core.c a/drivers/media/i2c/s5c73m3/s5c73m3-core.c > index 47605e36bc60..8f9b5713daf7 100644 > --- b/drivers/media/i2c/s5c73m3/s5c73m3-core.c > +++ a/drivers/media/i2c/s5c73m3/s5c73m3-core.c > @@ -819,7 +819,6 @@ static void s5c73m3_oif_try_format(struct s5c73m3 *state, > struct v4l2_subdev_format *fmt, > const struct s5c73m3_frame_size **fs) > { > - struct v4l2_subdev *sd = &state->sensor_sd; > u32 code; > > switch (fmt->pad) { > diff --git a/drivers/media/i2c/s5k5baf.c b/drivers/media/i2c/s5k5baf.c > index 67da2045f543..03ccfb0e1e11 100644 > --- a/drivers/media/i2c/s5k5baf.c > +++ b/drivers/media/i2c/s5k5baf.c > @@ -1472,14 +1472,11 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, > > if (sel->which == V4L2_SUBDEV_FORMAT_TRY) { > rects = (struct v4l2_rect * []) { > - &s5k5baf_cis_rect, > - v4l2_subdev_get_try_crop(sd, sd_state, > - PAD_CIS), > - v4l2_subdev_get_try_compose(sd, sd_state, > - PAD_CIS), > - v4l2_subdev_get_try_crop(sd, sd_state, > - PAD_OUT) > - }; > + &s5k5baf_cis_rect, > + v4l2_subdev_state_get_crop(sd_state, PAD_CIS), > + v4l2_subdev_state_get_compose(sd_state, PAD_CIS), > + v4l2_subdev_state_get_crop(sd_state, PAD_OUT) > + }; > s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); > return 0; > } > diff --git b/drivers/media/platform/samsung/s3c-camif/camif-capture.c a/drivers/media/platform/samsung/s3c-camif/camif-capture.c > index 295e083f38e8..be58260ea67e 100644 > --- b/drivers/media/platform/samsung/s3c-camif/camif-capture.c > +++ a/drivers/media/platform/samsung/s3c-camif/camif-capture.c > @@ -1216,7 +1216,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, > struct v4l2_mbus_framefmt *mf = &fmt->format; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > - mf = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad); > + mf = v4l2_subdev_state_get_format(sd_state, fmt->pad); > fmt->format = *mf; > return 0; > } > @@ -1305,7 +1305,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, > __camif_subdev_try_format(camif, mf, fmt->pad); > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > - mf = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad); > + mf = v4l2_subdev_state_get_format(sd_state, fmt->pad); > *mf = fmt->format; > mutex_unlock(&camif->lock); > return 0; > diff --git b/drivers/media/platform/ti/cal/cal-camerarx.c a/drivers/media/platform/ti/cal/cal-camerarx.c > index cea454ed9c20..61433744c6c4 100644 > --- b/drivers/media/platform/ti/cal/cal-camerarx.c > +++ a/drivers/media/platform/ti/cal/cal-camerarx.c > @@ -621,8 +621,6 @@ static int cal_camerarx_sd_enum_mbus_code(struct v4l2_subdev *sd, > struct v4l2_subdev_state *state, > struct v4l2_subdev_mbus_code_enum *code) > { > - struct cal_camerarx *phy = to_cal_camerarx(sd); > - > /* No transcoding, source and sink codes must match. */ > if (cal_rx_pad_is_source(code->pad)) { > struct v4l2_mbus_framefmt *fmt; > diff --git b/drivers/staging/media/imx/imx-ic-prp.c a/drivers/staging/media/imx/imx-ic-prp.c > index dd558fac6477..61d69f19657e 100644 > --- b/drivers/staging/media/imx/imx-ic-prp.c > +++ a/drivers/staging/media/imx/imx-ic-prp.c > @@ -82,8 +82,6 @@ static struct v4l2_mbus_framefmt * > __prp_get_fmt(struct prp_priv *priv, struct v4l2_subdev_state *sd_state, > unsigned int pad, enum v4l2_subdev_format_whence which) > { > - struct imx_ic_priv *ic_priv = priv->ic_priv; > - > if (which == V4L2_SUBDEV_FORMAT_TRY) > return v4l2_subdev_state_get_format(sd_state, pad); > else > diff --git b/drivers/staging/media/imx/imx-ic-prpencvf.c a/drivers/staging/media/imx/imx-ic-prpencvf.c > index 02db7dbb884b..ec73c901079e 100644 > --- b/drivers/staging/media/imx/imx-ic-prpencvf.c > +++ a/drivers/staging/media/imx/imx-ic-prpencvf.c > @@ -790,8 +790,6 @@ static struct v4l2_mbus_framefmt * > __prp_get_fmt(struct prp_priv *priv, struct v4l2_subdev_state *sd_state, > unsigned int pad, enum v4l2_subdev_format_whence which) > { > - struct imx_ic_priv *ic_priv = priv->ic_priv; > - > if (which == V4L2_SUBDEV_FORMAT_TRY) > return v4l2_subdev_state_get_format(sd_state, pad); > else > diff --git a/drivers/media/i2c/st-mipid02.c b/drivers/media/i2c/st-mipid02.c > index 9c9361354c00..b08a249b5fdd 100644 > --- a/drivers/media/i2c/st-mipid02.c > +++ b/drivers/media/i2c/st-mipid02.c > @@ -751,7 +751,7 @@ static void mipid02_set_fmt_source(struct v4l2_subdev *sd, > format->format = bridge->fmt; > else > format->format = *v4l2_subdev_state_get_format(sd_state, > - MIPID02_SINK_0); > + MIPID02_SINK_0); > > /* but code may need to be converted */ > format->format.code = serial_to_parallel_code(format->format.code); > diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c b/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c > index 117912d3bfbd..96353648c032 100644 > --- a/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c > +++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c > @@ -319,7 +319,7 @@ static void rkisp1_isp_start(struct rkisp1_isp *isp, > rkisp1_write(rkisp1, RKISP1_CIF_ISP_CTRL, val); > > src_fmt = v4l2_subdev_state_get_format(sd_state, > - RKISP1_ISP_PAD_SOURCE_VIDEO); > + RKISP1_ISP_PAD_SOURCE_VIDEO); > src_info = rkisp1_mbus_info_get_by_code(src_fmt->code); > > if (src_info->pixel_enc != V4L2_PIXEL_ENC_BAYER) > @@ -475,9 +475,9 @@ static void rkisp1_isp_set_src_fmt(struct rkisp1_isp *isp, > sink_fmt = v4l2_subdev_state_get_format(sd_state, > RKISP1_ISP_PAD_SINK_VIDEO); > src_fmt = v4l2_subdev_state_get_format(sd_state, > - RKISP1_ISP_PAD_SOURCE_VIDEO); > + RKISP1_ISP_PAD_SOURCE_VIDEO); > src_crop = v4l2_subdev_state_get_crop(sd_state, > - RKISP1_ISP_PAD_SOURCE_VIDEO); > + RKISP1_ISP_PAD_SOURCE_VIDEO); > > /* > * Media bus code. The ISP can operate in pass-through mode (Bayer in, Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-10-13 07:37:10 +00:00
mf = v4l2_subdev_state_get_format(sd_state, fmt->pad);
*mf = fmt->format;
}
} else {
if (ov965x->streaming) {
ret = -EBUSY;
} else {
ov965x->frame_size = size;
ov965x->format = fmt->format;
ov965x->tslb_reg = ov965x_formats[index].tslb_reg;
ov965x->apply_frame_fmt = 1;
}
}
if (!ret && fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
struct v4l2_subdev_frame_interval fiv = {
.interval = { 0, 1 }
};
/* Reset to minimum possible frame interval */
__ov965x_set_frame_interval(ov965x, &fiv);
}
mutex_unlock(&ov965x->lock);
if (!ret)
ov965x_update_exposure_ctrl(ov965x);
return ret;
}
static int ov965x_set_frame_size(struct ov965x *ov965x)
{
int i, ret = 0;
for (i = 0; ret == 0 && i < NUM_FMT_REGS; i++)
ret = ov965x_write(ov965x, frame_size_reg_addr[i],
ov965x->frame_size->regs[i]);
return ret;
}
static int __ov965x_set_params(struct ov965x *ov965x)
{
struct ov965x_ctrls *ctrls = &ov965x->ctrls;
int ret = 0;
u8 reg;
if (ov965x->apply_frame_fmt) {
reg = DEF_CLKRC + ov965x->fiv->clkrc_div;
ret = ov965x_write(ov965x, REG_CLKRC, reg);
if (ret < 0)
return ret;
ret = ov965x_set_frame_size(ov965x);
if (ret < 0)
return ret;
ret = ov965x_read(ov965x, REG_TSLB, &reg);
if (ret < 0)
return ret;
reg &= ~TSLB_YUYV_MASK;
reg |= ov965x->tslb_reg;
ret = ov965x_write(ov965x, REG_TSLB, reg);
if (ret < 0)
return ret;
}
ret = ov965x_set_default_gamma_curve(ov965x);
if (ret < 0)
return ret;
ret = ov965x_set_color_matrix(ov965x);
if (ret < 0)
return ret;
/*
* Select manual banding filter, the filter will
* be enabled further if required.
*/
ret = ov965x_read(ov965x, REG_COM11, &reg);
if (!ret)
reg |= COM11_BANDING;
ret = ov965x_write(ov965x, REG_COM11, reg);
if (ret < 0)
return ret;
/*
* Banding filter (REG_MBD value) needs to match selected
* resolution and frame rate, so it's always updated here.
*/
return ov965x_set_banding_filter(ov965x, ctrls->light_freq->val);
}
static int ov965x_s_stream(struct v4l2_subdev *sd, int on)
{
struct ov965x *ov965x = to_ov965x(sd);
struct ov965x_ctrls *ctrls = &ov965x->ctrls;
int ret = 0;
v4l2_dbg(1, debug, sd, "%s: on: %d\n", __func__, on);
mutex_lock(&ov965x->lock);
if (ov965x->streaming == !on) {
if (on)
ret = __ov965x_set_params(ov965x);
if (!ret && ctrls->update) {
/*
* ov965x_s_ctrl callback takes the mutex
* so it needs to be released here.
*/
mutex_unlock(&ov965x->lock);
ret = v4l2_ctrl_handler_setup(&ctrls->handler);
mutex_lock(&ov965x->lock);
if (!ret)
ctrls->update = 0;
}
if (!ret)
ret = ov965x_write(ov965x, REG_COM2,
on ? 0x01 : 0x11);
}
if (!ret)
ov965x->streaming += on ? 1 : -1;
WARN_ON(ov965x->streaming < 0);
mutex_unlock(&ov965x->lock);
return ret;
}
/*
* V4L2 subdev internal operations
*/
static int ov965x_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
{
struct v4l2_mbus_framefmt *mf =
media: v4l: subdev: Switch to stream-aware state functions Switch all drivers accessing sub-device state to use the stream-aware functions. We will soon remove the old ones. This patch has been generated using the following Coccinelle script: ---------8<------------ @@ expression E1, E2, E3; @@ - v4l2_subdev_get_pad_format(E1, E2, E3) + v4l2_subdev_state_get_format(E2, E3) @@ expression E1, E2, E3; @@ - v4l2_subdev_get_pad_crop(E1, E2, E3) + v4l2_subdev_state_get_crop(E2, E3) @@ expression E1, E2, E3; @@ - v4l2_subdev_get_pad_compose(E1, E2, E3) + v4l2_subdev_state_get_compose(E2, E3) @@ expression E1, E2, E3; @@ - v4l2_subdev_get_try_format(E1, E2, E3) + v4l2_subdev_state_get_format(E2, E3) @@ expression E1, E2, E3; @@ - v4l2_subdev_get_try_crop(E1, E2, E3) + v4l2_subdev_state_get_crop(E2, E3) @@ expression E1, E2, E3; @@ - v4l2_subdev_get_try_compose(E1, E2, E3) + v4l2_subdev_state_get_compose(E2, E3) ---------8<------------ Additionally drivers/media/i2c/s5k5baf.c and drivers/media/platform/samsung/s3c-camif/camif-capture.c have been manually changed as Coccinelle didn't. Further local variables have been removed as they became unused as a result of the other changes. Also Coccinelle introduced indentation by space in files drivers/media/i2c/st-mipid02.c and drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c. This has been also corrected. The diff from Coccinelle-generated changes are: > diff --git b/drivers/media/i2c/imx319.c a/drivers/media/i2c/imx319.c > index e549692ff478..420984382173 100644 > --- b/drivers/media/i2c/imx319.c > +++ a/drivers/media/i2c/imx319.c > @@ -2001,7 +2001,6 @@ static int imx319_do_get_pad_format(struct imx319 *imx319, > struct v4l2_subdev_format *fmt) > { > struct v4l2_mbus_framefmt *framefmt; > - struct v4l2_subdev *sd = &imx319->sd; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); > diff --git b/drivers/media/i2c/imx355.c a/drivers/media/i2c/imx355.c > index 96bdde685d65..e1b1d2fc79dd 100644 > --- b/drivers/media/i2c/imx355.c > +++ a/drivers/media/i2c/imx355.c > @@ -1299,7 +1299,6 @@ static int imx355_do_get_pad_format(struct imx355 *imx355, > struct v4l2_subdev_format *fmt) > { > struct v4l2_mbus_framefmt *framefmt; > - struct v4l2_subdev *sd = &imx355->sd; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); > diff --git b/drivers/media/i2c/ov08x40.c a/drivers/media/i2c/ov08x40.c > index ca799bbcfdb7..abbb0b774d43 100644 > --- b/drivers/media/i2c/ov08x40.c > +++ a/drivers/media/i2c/ov08x40.c > @@ -2774,7 +2774,6 @@ static int ov08x40_do_get_pad_format(struct ov08x40 *ov08x, > struct v4l2_subdev_format *fmt) > { > struct v4l2_mbus_framefmt *framefmt; > - struct v4l2_subdev *sd = &ov08x->sd; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); > diff --git b/drivers/media/i2c/ov13858.c a/drivers/media/i2c/ov13858.c > index 7816d9787c61..09387e335d80 100644 > --- b/drivers/media/i2c/ov13858.c > +++ a/drivers/media/i2c/ov13858.c > @@ -1316,7 +1316,6 @@ static int ov13858_do_get_pad_format(struct ov13858 *ov13858, > struct v4l2_subdev_format *fmt) > { > struct v4l2_mbus_framefmt *framefmt; > - struct v4l2_subdev *sd = &ov13858->sd; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); > diff --git b/drivers/media/i2c/ov13b10.c a/drivers/media/i2c/ov13b10.c > index 268cd4b03f9c..c06411d5ee2b 100644 > --- b/drivers/media/i2c/ov13b10.c > +++ a/drivers/media/i2c/ov13b10.c > @@ -1001,7 +1001,6 @@ static int ov13b10_do_get_pad_format(struct ov13b10 *ov13b, > struct v4l2_subdev_format *fmt) > { > struct v4l2_mbus_framefmt *framefmt; > - struct v4l2_subdev *sd = &ov13b->sd; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); > diff --git b/drivers/media/i2c/s5c73m3/s5c73m3-core.c a/drivers/media/i2c/s5c73m3/s5c73m3-core.c > index 47605e36bc60..8f9b5713daf7 100644 > --- b/drivers/media/i2c/s5c73m3/s5c73m3-core.c > +++ a/drivers/media/i2c/s5c73m3/s5c73m3-core.c > @@ -819,7 +819,6 @@ static void s5c73m3_oif_try_format(struct s5c73m3 *state, > struct v4l2_subdev_format *fmt, > const struct s5c73m3_frame_size **fs) > { > - struct v4l2_subdev *sd = &state->sensor_sd; > u32 code; > > switch (fmt->pad) { > diff --git a/drivers/media/i2c/s5k5baf.c b/drivers/media/i2c/s5k5baf.c > index 67da2045f543..03ccfb0e1e11 100644 > --- a/drivers/media/i2c/s5k5baf.c > +++ b/drivers/media/i2c/s5k5baf.c > @@ -1472,14 +1472,11 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, > > if (sel->which == V4L2_SUBDEV_FORMAT_TRY) { > rects = (struct v4l2_rect * []) { > - &s5k5baf_cis_rect, > - v4l2_subdev_get_try_crop(sd, sd_state, > - PAD_CIS), > - v4l2_subdev_get_try_compose(sd, sd_state, > - PAD_CIS), > - v4l2_subdev_get_try_crop(sd, sd_state, > - PAD_OUT) > - }; > + &s5k5baf_cis_rect, > + v4l2_subdev_state_get_crop(sd_state, PAD_CIS), > + v4l2_subdev_state_get_compose(sd_state, PAD_CIS), > + v4l2_subdev_state_get_crop(sd_state, PAD_OUT) > + }; > s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); > return 0; > } > diff --git b/drivers/media/platform/samsung/s3c-camif/camif-capture.c a/drivers/media/platform/samsung/s3c-camif/camif-capture.c > index 295e083f38e8..be58260ea67e 100644 > --- b/drivers/media/platform/samsung/s3c-camif/camif-capture.c > +++ a/drivers/media/platform/samsung/s3c-camif/camif-capture.c > @@ -1216,7 +1216,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, > struct v4l2_mbus_framefmt *mf = &fmt->format; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > - mf = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad); > + mf = v4l2_subdev_state_get_format(sd_state, fmt->pad); > fmt->format = *mf; > return 0; > } > @@ -1305,7 +1305,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, > __camif_subdev_try_format(camif, mf, fmt->pad); > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > - mf = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad); > + mf = v4l2_subdev_state_get_format(sd_state, fmt->pad); > *mf = fmt->format; > mutex_unlock(&camif->lock); > return 0; > diff --git b/drivers/media/platform/ti/cal/cal-camerarx.c a/drivers/media/platform/ti/cal/cal-camerarx.c > index cea454ed9c20..61433744c6c4 100644 > --- b/drivers/media/platform/ti/cal/cal-camerarx.c > +++ a/drivers/media/platform/ti/cal/cal-camerarx.c > @@ -621,8 +621,6 @@ static int cal_camerarx_sd_enum_mbus_code(struct v4l2_subdev *sd, > struct v4l2_subdev_state *state, > struct v4l2_subdev_mbus_code_enum *code) > { > - struct cal_camerarx *phy = to_cal_camerarx(sd); > - > /* No transcoding, source and sink codes must match. */ > if (cal_rx_pad_is_source(code->pad)) { > struct v4l2_mbus_framefmt *fmt; > diff --git b/drivers/staging/media/imx/imx-ic-prp.c a/drivers/staging/media/imx/imx-ic-prp.c > index dd558fac6477..61d69f19657e 100644 > --- b/drivers/staging/media/imx/imx-ic-prp.c > +++ a/drivers/staging/media/imx/imx-ic-prp.c > @@ -82,8 +82,6 @@ static struct v4l2_mbus_framefmt * > __prp_get_fmt(struct prp_priv *priv, struct v4l2_subdev_state *sd_state, > unsigned int pad, enum v4l2_subdev_format_whence which) > { > - struct imx_ic_priv *ic_priv = priv->ic_priv; > - > if (which == V4L2_SUBDEV_FORMAT_TRY) > return v4l2_subdev_state_get_format(sd_state, pad); > else > diff --git b/drivers/staging/media/imx/imx-ic-prpencvf.c a/drivers/staging/media/imx/imx-ic-prpencvf.c > index 02db7dbb884b..ec73c901079e 100644 > --- b/drivers/staging/media/imx/imx-ic-prpencvf.c > +++ a/drivers/staging/media/imx/imx-ic-prpencvf.c > @@ -790,8 +790,6 @@ static struct v4l2_mbus_framefmt * > __prp_get_fmt(struct prp_priv *priv, struct v4l2_subdev_state *sd_state, > unsigned int pad, enum v4l2_subdev_format_whence which) > { > - struct imx_ic_priv *ic_priv = priv->ic_priv; > - > if (which == V4L2_SUBDEV_FORMAT_TRY) > return v4l2_subdev_state_get_format(sd_state, pad); > else > diff --git a/drivers/media/i2c/st-mipid02.c b/drivers/media/i2c/st-mipid02.c > index 9c9361354c00..b08a249b5fdd 100644 > --- a/drivers/media/i2c/st-mipid02.c > +++ b/drivers/media/i2c/st-mipid02.c > @@ -751,7 +751,7 @@ static void mipid02_set_fmt_source(struct v4l2_subdev *sd, > format->format = bridge->fmt; > else > format->format = *v4l2_subdev_state_get_format(sd_state, > - MIPID02_SINK_0); > + MIPID02_SINK_0); > > /* but code may need to be converted */ > format->format.code = serial_to_parallel_code(format->format.code); > diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c b/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c > index 117912d3bfbd..96353648c032 100644 > --- a/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c > +++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c > @@ -319,7 +319,7 @@ static void rkisp1_isp_start(struct rkisp1_isp *isp, > rkisp1_write(rkisp1, RKISP1_CIF_ISP_CTRL, val); > > src_fmt = v4l2_subdev_state_get_format(sd_state, > - RKISP1_ISP_PAD_SOURCE_VIDEO); > + RKISP1_ISP_PAD_SOURCE_VIDEO); > src_info = rkisp1_mbus_info_get_by_code(src_fmt->code); > > if (src_info->pixel_enc != V4L2_PIXEL_ENC_BAYER) > @@ -475,9 +475,9 @@ static void rkisp1_isp_set_src_fmt(struct rkisp1_isp *isp, > sink_fmt = v4l2_subdev_state_get_format(sd_state, > RKISP1_ISP_PAD_SINK_VIDEO); > src_fmt = v4l2_subdev_state_get_format(sd_state, > - RKISP1_ISP_PAD_SOURCE_VIDEO); > + RKISP1_ISP_PAD_SOURCE_VIDEO); > src_crop = v4l2_subdev_state_get_crop(sd_state, > - RKISP1_ISP_PAD_SOURCE_VIDEO); > + RKISP1_ISP_PAD_SOURCE_VIDEO); > > /* > * Media bus code. The ISP can operate in pass-through mode (Bayer in, Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-10-13 07:37:10 +00:00
v4l2_subdev_state_get_format(fh->state, 0);
ov965x_get_default_format(mf);
return 0;
}
static const struct v4l2_subdev_pad_ops ov965x_pad_ops = {
.enum_mbus_code = ov965x_enum_mbus_code,
.enum_frame_size = ov965x_enum_frame_sizes,
.get_fmt = ov965x_get_fmt,
.set_fmt = ov965x_set_fmt,
.get_frame_interval = ov965x_get_frame_interval,
.set_frame_interval = ov965x_set_frame_interval,
};
static const struct v4l2_subdev_video_ops ov965x_video_ops = {
.s_stream = ov965x_s_stream,
};
static const struct v4l2_subdev_internal_ops ov965x_sd_internal_ops = {
.open = ov965x_open,
};
static const struct v4l2_subdev_core_ops ov965x_core_ops = {
.s_power = ov965x_s_power,
.log_status = v4l2_ctrl_subdev_log_status,
.subscribe_event = v4l2_ctrl_subdev_subscribe_event,
.unsubscribe_event = v4l2_event_subdev_unsubscribe,
};
static const struct v4l2_subdev_ops ov965x_subdev_ops = {
.core = &ov965x_core_ops,
.pad = &ov965x_pad_ops,
.video = &ov965x_video_ops,
};
static int ov965x_configure_gpios(struct ov965x *ov965x)
{
struct device *dev = regmap_get_device(ov965x->regmap);
ov965x->gpios[GPIO_PWDN] = devm_gpiod_get_optional(dev, "powerdown",
GPIOD_OUT_HIGH);
if (IS_ERR(ov965x->gpios[GPIO_PWDN])) {
dev_info(dev, "can't get %s GPIO\n", "powerdown");
return PTR_ERR(ov965x->gpios[GPIO_PWDN]);
}
ov965x->gpios[GPIO_RST] = devm_gpiod_get_optional(dev, "reset",
GPIOD_OUT_HIGH);
if (IS_ERR(ov965x->gpios[GPIO_RST])) {
dev_info(dev, "can't get %s GPIO\n", "reset");
return PTR_ERR(ov965x->gpios[GPIO_RST]);
}
return 0;
}
static int ov965x_detect_sensor(struct v4l2_subdev *sd)
{
struct ov965x *ov965x = to_ov965x(sd);
u8 pid, ver;
int ret;
mutex_lock(&ov965x->lock);
ret = __ov965x_set_power(ov965x, 1);
if (ret)
goto out;
msleep(25);
/* Check sensor revision */
ret = ov965x_read(ov965x, REG_PID, &pid);
if (!ret)
ret = ov965x_read(ov965x, REG_VER, &ver);
__ov965x_set_power(ov965x, 0);
if (!ret) {
ov965x->id = OV965X_ID(pid, ver);
if (ov965x->id == OV9650_ID || ov965x->id == OV9652_ID) {
v4l2_info(sd, "Found OV%04X sensor\n", ov965x->id);
} else {
v4l2_err(sd, "Sensor detection failed (%04X)\n",
ov965x->id);
ret = -ENODEV;
}
}
out:
mutex_unlock(&ov965x->lock);
return ret;
}
static int ov965x_probe(struct i2c_client *client)
{
struct v4l2_subdev *sd;
struct ov965x *ov965x;
int ret;
static const struct regmap_config ov965x_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = 0xab,
};
ov965x = devm_kzalloc(&client->dev, sizeof(*ov965x), GFP_KERNEL);
if (!ov965x)
return -ENOMEM;
ov965x->regmap = devm_regmap_init_sccb(client, &ov965x_regmap_config);
if (IS_ERR(ov965x->regmap)) {
dev_err(&client->dev, "Failed to allocate register map\n");
return PTR_ERR(ov965x->regmap);
}
if (dev_fwnode(&client->dev)) {
ov965x->clk = devm_clk_get(&client->dev, NULL);
if (IS_ERR(ov965x->clk))
return PTR_ERR(ov965x->clk);
ov965x->mclk_frequency = clk_get_rate(ov965x->clk);
ret = ov965x_configure_gpios(ov965x);
if (ret < 0)
return ret;
} else {
dev_err(&client->dev,
"No device properties specified\n");
return -EINVAL;
}
mutex_init(&ov965x->lock);
sd = &ov965x->sd;
v4l2_i2c_subdev_init(sd, client, &ov965x_subdev_ops);
strscpy(sd->name, DRIVER_NAME, sizeof(sd->name));
sd->internal_ops = &ov965x_sd_internal_ops;
sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
V4L2_SUBDEV_FL_HAS_EVENTS;
ov965x->pad.flags = MEDIA_PAD_FL_SOURCE;
[media] uapi/media.h: Rename entities types to functions Rename the userspace types from MEDIA_ENT_T_ to MEDIA_ENT_F_ and add the backward compatibility bits. The changes at the .c files was generated by the following coccinelle script: @@ @@ -MEDIA_ENT_T_UNKNOWN +MEDIA_ENT_F_UNKNOWN @@ @@ -MEDIA_ENT_T_DVB_BASE +MEDIA_ENT_F_DVB_BASE @@ @@ -MEDIA_ENT_T_V4L2_BASE +MEDIA_ENT_F_V4L2_BASE @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_BASE +MEDIA_ENT_F_V4L2_SUBDEV_BASE @@ @@ -MEDIA_ENT_T_CONNECTOR_BASE +MEDIA_ENT_F_CONNECTOR_BASE @@ @@ -MEDIA_ENT_T_V4L2_VIDEO +MEDIA_ENT_F_IO_V4L @@ @@ -MEDIA_ENT_T_V4L2_VBI +MEDIA_ENT_F_IO_VBI @@ @@ -MEDIA_ENT_T_V4L2_SWRADIO +MEDIA_ENT_F_IO_SWRADIO @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_UNKNOWN +MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN @@ @@ -MEDIA_ENT_T_CONN_RF +MEDIA_ENT_F_CONN_RF @@ @@ -MEDIA_ENT_T_CONN_SVIDEO +MEDIA_ENT_F_CONN_SVIDEO @@ @@ -MEDIA_ENT_T_CONN_COMPOSITE +MEDIA_ENT_F_CONN_COMPOSITE @@ @@ -MEDIA_ENT_T_CONN_TEST +MEDIA_ENT_F_CONN_TEST @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_SENSOR +MEDIA_ENT_F_CAM_SENSOR @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_FLASH +MEDIA_ENT_F_FLASH @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_LENS +MEDIA_ENT_F_LENS @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_DECODER +MEDIA_ENT_F_ATV_DECODER @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_TUNER +MEDIA_ENT_F_TUNER @@ @@ -MEDIA_ENT_T_DVB_DEMOD +MEDIA_ENT_F_DTV_DEMOD @@ @@ -MEDIA_ENT_T_DVB_DEMUX +MEDIA_ENT_F_TS_DEMUX @@ @@ -MEDIA_ENT_T_DVB_TSOUT +MEDIA_ENT_F_IO_DTV @@ @@ -MEDIA_ENT_T_DVB_CA +MEDIA_ENT_F_DTV_CA @@ @@ -MEDIA_ENT_T_DVB_NET_DECAP +MEDIA_ENT_F_DTV_NET_DECAP Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-12-10 19:25:41 +00:00
sd->entity.function = MEDIA_ENT_F_CAM_SENSOR;
ret = media_entity_pads_init(&sd->entity, 1, &ov965x->pad);
if (ret < 0)
goto err_mutex;
ret = ov965x_initialize_controls(ov965x);
if (ret < 0)
goto err_me;
ov965x_get_default_format(&ov965x->format);
ov965x->frame_size = &ov965x_framesizes[0];
ov965x->fiv = &ov965x_intervals[0];
ret = ov965x_detect_sensor(sd);
if (ret < 0)
goto err_ctrls;
/* Update exposure time min/max to match frame format */
ov965x_update_exposure_ctrl(ov965x);
ret = v4l2_async_register_subdev(sd);
if (ret < 0)
goto err_ctrls;
return 0;
err_ctrls:
v4l2_ctrl_handler_free(sd->ctrl_handler);
err_me:
media_entity_cleanup(&sd->entity);
err_mutex:
mutex_destroy(&ov965x->lock);
return ret;
}
i2c: Make remove callback return void The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-15 08:02:30 +00:00
static void ov965x_remove(struct i2c_client *client)
{
struct v4l2_subdev *sd = i2c_get_clientdata(client);
struct ov965x *ov965x = to_ov965x(sd);
v4l2_async_unregister_subdev(sd);
v4l2_ctrl_handler_free(sd->ctrl_handler);
media_entity_cleanup(&sd->entity);
mutex_destroy(&ov965x->lock);
}
static const struct i2c_device_id ov965x_id[] = {
{ "OV9650", 0 },
{ "OV9652", 0 },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(i2c, ov965x_id);
#if IS_ENABLED(CONFIG_OF)
static const struct of_device_id ov965x_of_match[] = {
{ .compatible = "ovti,ov9650", },
{ .compatible = "ovti,ov9652", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, ov965x_of_match);
#endif
static struct i2c_driver ov965x_i2c_driver = {
.driver = {
.name = DRIVER_NAME,
.of_match_table = of_match_ptr(ov965x_of_match),
},
.probe = ov965x_probe,
.remove = ov965x_remove,
.id_table = ov965x_id,
};
module_i2c_driver(ov965x_i2c_driver);
MODULE_AUTHOR("Sylwester Nawrocki <sylvester.nawrocki@gmail.com>");
MODULE_DESCRIPTION("OV9650/OV9652 CMOS Image Sensor driver");
MODULE_LICENSE("GPL");