License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
|
|
|
/* SPDX-License-Identifier: GPL-2.0 */
|
2009-08-10 02:48:59 +00:00
|
|
|
#undef TRACE_SYSTEM
|
|
|
|
|
#define TRACE_SYSTEM timer
|
|
|
|
|
|
|
|
|
|
#if !defined(_TRACE_TIMER_H) || defined(TRACE_HEADER_MULTI_READ)
|
|
|
|
|
#define _TRACE_TIMER_H
|
|
|
|
|
|
|
|
|
|
#include <linux/tracepoint.h>
|
2009-08-10 02:51:23 +00:00
|
|
|
#include <linux/hrtimer.h>
|
2009-08-10 02:48:59 +00:00
|
|
|
#include <linux/timer.h>
|
|
|
|
|
|
2010-05-24 08:23:15 +00:00
|
|
|
DECLARE_EVENT_CLASS(timer_class,
|
2009-08-10 02:48:59 +00:00
|
|
|
|
|
|
|
|
TP_PROTO(struct timer_list *timer),
|
|
|
|
|
|
|
|
|
|
TP_ARGS(timer),
|
|
|
|
|
|
|
|
|
|
TP_STRUCT__entry(
|
|
|
|
|
__field( void *, timer )
|
|
|
|
|
),
|
|
|
|
|
|
|
|
|
|
TP_fast_assign(
|
|
|
|
|
__entry->timer = timer;
|
|
|
|
|
),
|
|
|
|
|
|
events: Harmonize event field names and print output names
Now that we can filter based on fields via perf record, people
will start using filter expressions and will expect them to
be obvious.
The primary way to see which fields are available is by looking
at the trace output, such as:
gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer
While 'irq==0' filters work, the 'handler==<x>' filter expression
does not work:
$ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1
Error: failed to set filter with 22 (Invalid argument)
The problem is that while an 'irq' field exists and is recognized
as a filter field - 'handler' does not exist - its name is 'name'
in the output.
To solve this, we need to synchronize the printout and the field
names, wherever possible.
In cases where the printout prints a non-field, we enclose
that information in square brackets, such as:
perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU]
perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER]
This way users can use filter expressions more intuitively: all
fields that show up as 'primary' (non-bracketed) information is
filterable.
This patch harmonizes the field names for all irq, bkl, power,
sched and timer events.
We might in fact think about dropping the print format bit of
generic tracepoints altogether, and just print the fields that
are being recorded.
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 09:50:39 +00:00
|
|
|
TP_printk("timer=%p", __entry->timer)
|
2009-08-10 02:48:59 +00:00
|
|
|
);
|
|
|
|
|
|
2010-05-24 08:23:15 +00:00
|
|
|
/**
|
|
|
|
|
* timer_init - called when the timer is initialized
|
|
|
|
|
* @timer: pointer to struct timer_list
|
|
|
|
|
*/
|
|
|
|
|
DEFINE_EVENT(timer_class, timer_init,
|
|
|
|
|
|
|
|
|
|
TP_PROTO(struct timer_list *timer),
|
|
|
|
|
|
|
|
|
|
TP_ARGS(timer)
|
|
|
|
|
);
|
|
|
|
|
|
2017-02-10 15:41:15 +00:00
|
|
|
#define decode_timer_flags(flags) \
|
|
|
|
|
__print_flags(flags, "|", \
|
|
|
|
|
{ TIMER_MIGRATING, "M" }, \
|
|
|
|
|
{ TIMER_DEFERRABLE, "D" }, \
|
|
|
|
|
{ TIMER_PINNED, "P" }, \
|
|
|
|
|
{ TIMER_IRQSAFE, "I" })
|
|
|
|
|
|
2009-08-10 02:48:59 +00:00
|
|
|
/**
|
|
|
|
|
* timer_start - called when the timer is started
|
|
|
|
|
* @timer: pointer to struct timer_list
|
|
|
|
|
* @expires: the timers expiry time
|
|
|
|
|
*/
|
|
|
|
|
TRACE_EVENT(timer_start,
|
|
|
|
|
|
2015-05-07 23:20:34 +00:00
|
|
|
TP_PROTO(struct timer_list *timer,
|
|
|
|
|
unsigned long expires,
|
2015-05-26 22:50:29 +00:00
|
|
|
unsigned int flags),
|
2009-08-10 02:48:59 +00:00
|
|
|
|
2015-05-26 22:50:29 +00:00
|
|
|
TP_ARGS(timer, expires, flags),
|
2009-08-10 02:48:59 +00:00
|
|
|
|
|
|
|
|
TP_STRUCT__entry(
|
|
|
|
|
__field( void *, timer )
|
|
|
|
|
__field( void *, function )
|
|
|
|
|
__field( unsigned long, expires )
|
|
|
|
|
__field( unsigned long, now )
|
2015-05-26 22:50:29 +00:00
|
|
|
__field( unsigned int, flags )
|
2009-08-10 02:48:59 +00:00
|
|
|
),
|
|
|
|
|
|
|
|
|
|
TP_fast_assign(
|
|
|
|
|
__entry->timer = timer;
|
|
|
|
|
__entry->function = timer->function;
|
|
|
|
|
__entry->expires = expires;
|
|
|
|
|
__entry->now = jiffies;
|
2015-05-26 22:50:29 +00:00
|
|
|
__entry->flags = flags;
|
2009-08-10 02:48:59 +00:00
|
|
|
),
|
|
|
|
|
|
2017-02-10 15:41:15 +00:00
|
|
|
TP_printk("timer=%p function=%pf expires=%lu [timeout=%ld] cpu=%u idx=%u flags=%s",
|
2009-08-10 02:48:59 +00:00
|
|
|
__entry->timer, __entry->function, __entry->expires,
|
2017-02-10 15:41:15 +00:00
|
|
|
(long)__entry->expires - __entry->now,
|
|
|
|
|
__entry->flags & TIMER_CPUMASK,
|
|
|
|
|
__entry->flags >> TIMER_ARRAYSHIFT,
|
|
|
|
|
decode_timer_flags(__entry->flags & TIMER_TRACE_FLAGMASK))
|
2009-08-10 02:48:59 +00:00
|
|
|
);
|
|
|
|
|
|
|
|
|
|
/**
|
|
|
|
|
* timer_expire_entry - called immediately before the timer callback
|
|
|
|
|
* @timer: pointer to struct timer_list
|
|
|
|
|
*
|
|
|
|
|
* Allows to determine the timer latency.
|
|
|
|
|
*/
|
|
|
|
|
TRACE_EVENT(timer_expire_entry,
|
|
|
|
|
|
|
|
|
|
TP_PROTO(struct timer_list *timer),
|
|
|
|
|
|
|
|
|
|
TP_ARGS(timer),
|
|
|
|
|
|
|
|
|
|
TP_STRUCT__entry(
|
|
|
|
|
__field( void *, timer )
|
|
|
|
|
__field( unsigned long, now )
|
2010-08-18 22:33:13 +00:00
|
|
|
__field( void *, function)
|
2009-08-10 02:48:59 +00:00
|
|
|
),
|
|
|
|
|
|
|
|
|
|
TP_fast_assign(
|
|
|
|
|
__entry->timer = timer;
|
|
|
|
|
__entry->now = jiffies;
|
2010-08-18 22:33:13 +00:00
|
|
|
__entry->function = timer->function;
|
2009-08-10 02:48:59 +00:00
|
|
|
),
|
|
|
|
|
|
2010-08-18 22:33:13 +00:00
|
|
|
TP_printk("timer=%p function=%pf now=%lu", __entry->timer, __entry->function,__entry->now)
|
2009-08-10 02:48:59 +00:00
|
|
|
);
|
|
|
|
|
|
|
|
|
|
/**
|
|
|
|
|
* timer_expire_exit - called immediately after the timer callback returns
|
|
|
|
|
* @timer: pointer to struct timer_list
|
|
|
|
|
*
|
|
|
|
|
* When used in combination with the timer_expire_entry tracepoint we can
|
|
|
|
|
* determine the runtime of the timer callback function.
|
|
|
|
|
*
|
|
|
|
|
* NOTE: Do NOT derefernce timer in TP_fast_assign. The pointer might
|
|
|
|
|
* be invalid. We solely track the pointer.
|
|
|
|
|
*/
|
2010-05-24 08:23:15 +00:00
|
|
|
DEFINE_EVENT(timer_class, timer_expire_exit,
|
2009-08-10 02:48:59 +00:00
|
|
|
|
|
|
|
|
TP_PROTO(struct timer_list *timer),
|
|
|
|
|
|
2010-05-24 08:23:15 +00:00
|
|
|
TP_ARGS(timer)
|
2009-08-10 02:48:59 +00:00
|
|
|
);
|
|
|
|
|
|
|
|
|
|
/**
|
|
|
|
|
* timer_cancel - called when the timer is canceled
|
|
|
|
|
* @timer: pointer to struct timer_list
|
|
|
|
|
*/
|
2010-05-24 08:23:15 +00:00
|
|
|
DEFINE_EVENT(timer_class, timer_cancel,
|
2009-08-10 02:48:59 +00:00
|
|
|
|
|
|
|
|
TP_PROTO(struct timer_list *timer),
|
|
|
|
|
|
2010-05-24 08:23:15 +00:00
|
|
|
TP_ARGS(timer)
|
2009-08-10 02:48:59 +00:00
|
|
|
);
|
|
|
|
|
|
2017-12-21 10:41:37 +00:00
|
|
|
#define decode_clockid(type) \
|
|
|
|
|
__print_symbolic(type, \
|
|
|
|
|
{ CLOCK_REALTIME, "CLOCK_REALTIME" }, \
|
|
|
|
|
{ CLOCK_MONOTONIC, "CLOCK_MONOTONIC" }, \
|
|
|
|
|
{ CLOCK_BOOTTIME, "CLOCK_BOOTTIME" }, \
|
|
|
|
|
{ CLOCK_TAI, "CLOCK_TAI" })
|
|
|
|
|
|
|
|
|
|
#define decode_hrtimer_mode(mode) \
|
|
|
|
|
__print_symbolic(mode, \
|
|
|
|
|
{ HRTIMER_MODE_ABS, "ABS" }, \
|
|
|
|
|
{ HRTIMER_MODE_REL, "REL" }, \
|
|
|
|
|
{ HRTIMER_MODE_ABS_PINNED, "ABS|PINNED" }, \
|
2017-12-21 10:41:55 +00:00
|
|
|
{ HRTIMER_MODE_REL_PINNED, "REL|PINNED" }, \
|
|
|
|
|
{ HRTIMER_MODE_ABS_SOFT, "ABS|SOFT" }, \
|
|
|
|
|
{ HRTIMER_MODE_REL_SOFT, "REL|SOFT" }, \
|
|
|
|
|
{ HRTIMER_MODE_ABS_PINNED_SOFT, "ABS|PINNED|SOFT" }, \
|
|
|
|
|
{ HRTIMER_MODE_REL_PINNED_SOFT, "REL|PINNED|SOFT" })
|
2017-12-21 10:41:37 +00:00
|
|
|
|
2009-08-10 02:51:23 +00:00
|
|
|
/**
|
|
|
|
|
* hrtimer_init - called when the hrtimer is initialized
|
2013-03-16 11:53:05 +00:00
|
|
|
* @hrtimer: pointer to struct hrtimer
|
2009-08-10 02:51:23 +00:00
|
|
|
* @clockid: the hrtimers clock
|
|
|
|
|
* @mode: the hrtimers mode
|
|
|
|
|
*/
|
|
|
|
|
TRACE_EVENT(hrtimer_init,
|
|
|
|
|
|
events: Harmonize event field names and print output names
Now that we can filter based on fields via perf record, people
will start using filter expressions and will expect them to
be obvious.
The primary way to see which fields are available is by looking
at the trace output, such as:
gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer
While 'irq==0' filters work, the 'handler==<x>' filter expression
does not work:
$ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1
Error: failed to set filter with 22 (Invalid argument)
The problem is that while an 'irq' field exists and is recognized
as a filter field - 'handler' does not exist - its name is 'name'
in the output.
To solve this, we need to synchronize the printout and the field
names, wherever possible.
In cases where the printout prints a non-field, we enclose
that information in square brackets, such as:
perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU]
perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER]
This way users can use filter expressions more intuitively: all
fields that show up as 'primary' (non-bracketed) information is
filterable.
This patch harmonizes the field names for all irq, bkl, power,
sched and timer events.
We might in fact think about dropping the print format bit of
generic tracepoints altogether, and just print the fields that
are being recorded.
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 09:50:39 +00:00
|
|
|
TP_PROTO(struct hrtimer *hrtimer, clockid_t clockid,
|
2009-08-10 02:51:23 +00:00
|
|
|
enum hrtimer_mode mode),
|
|
|
|
|
|
events: Harmonize event field names and print output names
Now that we can filter based on fields via perf record, people
will start using filter expressions and will expect them to
be obvious.
The primary way to see which fields are available is by looking
at the trace output, such as:
gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer
While 'irq==0' filters work, the 'handler==<x>' filter expression
does not work:
$ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1
Error: failed to set filter with 22 (Invalid argument)
The problem is that while an 'irq' field exists and is recognized
as a filter field - 'handler' does not exist - its name is 'name'
in the output.
To solve this, we need to synchronize the printout and the field
names, wherever possible.
In cases where the printout prints a non-field, we enclose
that information in square brackets, such as:
perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU]
perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER]
This way users can use filter expressions more intuitively: all
fields that show up as 'primary' (non-bracketed) information is
filterable.
This patch harmonizes the field names for all irq, bkl, power,
sched and timer events.
We might in fact think about dropping the print format bit of
generic tracepoints altogether, and just print the fields that
are being recorded.
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 09:50:39 +00:00
|
|
|
TP_ARGS(hrtimer, clockid, mode),
|
2009-08-10 02:51:23 +00:00
|
|
|
|
|
|
|
|
TP_STRUCT__entry(
|
events: Harmonize event field names and print output names
Now that we can filter based on fields via perf record, people
will start using filter expressions and will expect them to
be obvious.
The primary way to see which fields are available is by looking
at the trace output, such as:
gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer
While 'irq==0' filters work, the 'handler==<x>' filter expression
does not work:
$ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1
Error: failed to set filter with 22 (Invalid argument)
The problem is that while an 'irq' field exists and is recognized
as a filter field - 'handler' does not exist - its name is 'name'
in the output.
To solve this, we need to synchronize the printout and the field
names, wherever possible.
In cases where the printout prints a non-field, we enclose
that information in square brackets, such as:
perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU]
perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER]
This way users can use filter expressions more intuitively: all
fields that show up as 'primary' (non-bracketed) information is
filterable.
This patch harmonizes the field names for all irq, bkl, power,
sched and timer events.
We might in fact think about dropping the print format bit of
generic tracepoints altogether, and just print the fields that
are being recorded.
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 09:50:39 +00:00
|
|
|
__field( void *, hrtimer )
|
2009-08-10 02:51:23 +00:00
|
|
|
__field( clockid_t, clockid )
|
|
|
|
|
__field( enum hrtimer_mode, mode )
|
|
|
|
|
),
|
|
|
|
|
|
|
|
|
|
TP_fast_assign(
|
events: Harmonize event field names and print output names
Now that we can filter based on fields via perf record, people
will start using filter expressions and will expect them to
be obvious.
The primary way to see which fields are available is by looking
at the trace output, such as:
gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer
While 'irq==0' filters work, the 'handler==<x>' filter expression
does not work:
$ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1
Error: failed to set filter with 22 (Invalid argument)
The problem is that while an 'irq' field exists and is recognized
as a filter field - 'handler' does not exist - its name is 'name'
in the output.
To solve this, we need to synchronize the printout and the field
names, wherever possible.
In cases where the printout prints a non-field, we enclose
that information in square brackets, such as:
perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU]
perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER]
This way users can use filter expressions more intuitively: all
fields that show up as 'primary' (non-bracketed) information is
filterable.
This patch harmonizes the field names for all irq, bkl, power,
sched and timer events.
We might in fact think about dropping the print format bit of
generic tracepoints altogether, and just print the fields that
are being recorded.
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 09:50:39 +00:00
|
|
|
__entry->hrtimer = hrtimer;
|
2009-08-10 02:51:23 +00:00
|
|
|
__entry->clockid = clockid;
|
|
|
|
|
__entry->mode = mode;
|
|
|
|
|
),
|
|
|
|
|
|
events: Harmonize event field names and print output names
Now that we can filter based on fields via perf record, people
will start using filter expressions and will expect them to
be obvious.
The primary way to see which fields are available is by looking
at the trace output, such as:
gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer
While 'irq==0' filters work, the 'handler==<x>' filter expression
does not work:
$ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1
Error: failed to set filter with 22 (Invalid argument)
The problem is that while an 'irq' field exists and is recognized
as a filter field - 'handler' does not exist - its name is 'name'
in the output.
To solve this, we need to synchronize the printout and the field
names, wherever possible.
In cases where the printout prints a non-field, we enclose
that information in square brackets, such as:
perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU]
perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER]
This way users can use filter expressions more intuitively: all
fields that show up as 'primary' (non-bracketed) information is
filterable.
This patch harmonizes the field names for all irq, bkl, power,
sched and timer events.
We might in fact think about dropping the print format bit of
generic tracepoints altogether, and just print the fields that
are being recorded.
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 09:50:39 +00:00
|
|
|
TP_printk("hrtimer=%p clockid=%s mode=%s", __entry->hrtimer,
|
2017-12-21 10:41:37 +00:00
|
|
|
decode_clockid(__entry->clockid),
|
|
|
|
|
decode_hrtimer_mode(__entry->mode))
|
2009-08-10 02:51:23 +00:00
|
|
|
);
|
|
|
|
|
|
|
|
|
|
/**
|
|
|
|
|
* hrtimer_start - called when the hrtimer is started
|
2013-03-16 11:53:05 +00:00
|
|
|
* @hrtimer: pointer to struct hrtimer
|
2009-08-10 02:51:23 +00:00
|
|
|
*/
|
|
|
|
|
TRACE_EVENT(hrtimer_start,
|
|
|
|
|
|
2017-12-21 10:41:38 +00:00
|
|
|
TP_PROTO(struct hrtimer *hrtimer, enum hrtimer_mode mode),
|
2009-08-10 02:51:23 +00:00
|
|
|
|
2017-12-21 10:41:38 +00:00
|
|
|
TP_ARGS(hrtimer, mode),
|
2009-08-10 02:51:23 +00:00
|
|
|
|
|
|
|
|
TP_STRUCT__entry(
|
events: Harmonize event field names and print output names
Now that we can filter based on fields via perf record, people
will start using filter expressions and will expect them to
be obvious.
The primary way to see which fields are available is by looking
at the trace output, such as:
gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer
While 'irq==0' filters work, the 'handler==<x>' filter expression
does not work:
$ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1
Error: failed to set filter with 22 (Invalid argument)
The problem is that while an 'irq' field exists and is recognized
as a filter field - 'handler' does not exist - its name is 'name'
in the output.
To solve this, we need to synchronize the printout and the field
names, wherever possible.
In cases where the printout prints a non-field, we enclose
that information in square brackets, such as:
perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU]
perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER]
This way users can use filter expressions more intuitively: all
fields that show up as 'primary' (non-bracketed) information is
filterable.
This patch harmonizes the field names for all irq, bkl, power,
sched and timer events.
We might in fact think about dropping the print format bit of
generic tracepoints altogether, and just print the fields that
are being recorded.
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 09:50:39 +00:00
|
|
|
__field( void *, hrtimer )
|
2009-08-10 02:51:23 +00:00
|
|
|
__field( void *, function )
|
|
|
|
|
__field( s64, expires )
|
|
|
|
|
__field( s64, softexpires )
|
2017-12-21 10:41:38 +00:00
|
|
|
__field( enum hrtimer_mode, mode )
|
2009-08-10 02:51:23 +00:00
|
|
|
),
|
|
|
|
|
|
|
|
|
|
TP_fast_assign(
|
events: Harmonize event field names and print output names
Now that we can filter based on fields via perf record, people
will start using filter expressions and will expect them to
be obvious.
The primary way to see which fields are available is by looking
at the trace output, such as:
gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer
While 'irq==0' filters work, the 'handler==<x>' filter expression
does not work:
$ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1
Error: failed to set filter with 22 (Invalid argument)
The problem is that while an 'irq' field exists and is recognized
as a filter field - 'handler' does not exist - its name is 'name'
in the output.
To solve this, we need to synchronize the printout and the field
names, wherever possible.
In cases where the printout prints a non-field, we enclose
that information in square brackets, such as:
perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU]
perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER]
This way users can use filter expressions more intuitively: all
fields that show up as 'primary' (non-bracketed) information is
filterable.
This patch harmonizes the field names for all irq, bkl, power,
sched and timer events.
We might in fact think about dropping the print format bit of
generic tracepoints altogether, and just print the fields that
are being recorded.
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 09:50:39 +00:00
|
|
|
__entry->hrtimer = hrtimer;
|
|
|
|
|
__entry->function = hrtimer->function;
|
2016-12-25 10:38:40 +00:00
|
|
|
__entry->expires = hrtimer_get_expires(hrtimer);
|
|
|
|
|
__entry->softexpires = hrtimer_get_softexpires(hrtimer);
|
2017-12-21 10:41:38 +00:00
|
|
|
__entry->mode = mode;
|
2009-08-10 02:51:23 +00:00
|
|
|
),
|
|
|
|
|
|
2017-12-21 10:41:38 +00:00
|
|
|
TP_printk("hrtimer=%p function=%pf expires=%llu softexpires=%llu "
|
|
|
|
|
"mode=%s", __entry->hrtimer, __entry->function,
|
2016-12-25 10:38:40 +00:00
|
|
|
(unsigned long long) __entry->expires,
|
2017-12-21 10:41:38 +00:00
|
|
|
(unsigned long long) __entry->softexpires,
|
|
|
|
|
decode_hrtimer_mode(__entry->mode))
|
2009-08-10 02:51:23 +00:00
|
|
|
);
|
|
|
|
|
|
|
|
|
|
/**
|
2013-03-16 11:53:05 +00:00
|
|
|
* hrtimer_expire_entry - called immediately before the hrtimer callback
|
|
|
|
|
* @hrtimer: pointer to struct hrtimer
|
2009-08-10 02:51:23 +00:00
|
|
|
* @now: pointer to variable which contains current time of the
|
|
|
|
|
* timers base.
|
|
|
|
|
*
|
|
|
|
|
* Allows to determine the timer latency.
|
|
|
|
|
*/
|
|
|
|
|
TRACE_EVENT(hrtimer_expire_entry,
|
|
|
|
|
|
events: Harmonize event field names and print output names
Now that we can filter based on fields via perf record, people
will start using filter expressions and will expect them to
be obvious.
The primary way to see which fields are available is by looking
at the trace output, such as:
gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer
While 'irq==0' filters work, the 'handler==<x>' filter expression
does not work:
$ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1
Error: failed to set filter with 22 (Invalid argument)
The problem is that while an 'irq' field exists and is recognized
as a filter field - 'handler' does not exist - its name is 'name'
in the output.
To solve this, we need to synchronize the printout and the field
names, wherever possible.
In cases where the printout prints a non-field, we enclose
that information in square brackets, such as:
perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU]
perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER]
This way users can use filter expressions more intuitively: all
fields that show up as 'primary' (non-bracketed) information is
filterable.
This patch harmonizes the field names for all irq, bkl, power,
sched and timer events.
We might in fact think about dropping the print format bit of
generic tracepoints altogether, and just print the fields that
are being recorded.
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 09:50:39 +00:00
|
|
|
TP_PROTO(struct hrtimer *hrtimer, ktime_t *now),
|
2009-08-10 02:51:23 +00:00
|
|
|
|
events: Harmonize event field names and print output names
Now that we can filter based on fields via perf record, people
will start using filter expressions and will expect them to
be obvious.
The primary way to see which fields are available is by looking
at the trace output, such as:
gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer
While 'irq==0' filters work, the 'handler==<x>' filter expression
does not work:
$ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1
Error: failed to set filter with 22 (Invalid argument)
The problem is that while an 'irq' field exists and is recognized
as a filter field - 'handler' does not exist - its name is 'name'
in the output.
To solve this, we need to synchronize the printout and the field
names, wherever possible.
In cases where the printout prints a non-field, we enclose
that information in square brackets, such as:
perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU]
perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER]
This way users can use filter expressions more intuitively: all
fields that show up as 'primary' (non-bracketed) information is
filterable.
This patch harmonizes the field names for all irq, bkl, power,
sched and timer events.
We might in fact think about dropping the print format bit of
generic tracepoints altogether, and just print the fields that
are being recorded.
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 09:50:39 +00:00
|
|
|
TP_ARGS(hrtimer, now),
|
2009-08-10 02:51:23 +00:00
|
|
|
|
|
|
|
|
TP_STRUCT__entry(
|
events: Harmonize event field names and print output names
Now that we can filter based on fields via perf record, people
will start using filter expressions and will expect them to
be obvious.
The primary way to see which fields are available is by looking
at the trace output, such as:
gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer
While 'irq==0' filters work, the 'handler==<x>' filter expression
does not work:
$ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1
Error: failed to set filter with 22 (Invalid argument)
The problem is that while an 'irq' field exists and is recognized
as a filter field - 'handler' does not exist - its name is 'name'
in the output.
To solve this, we need to synchronize the printout and the field
names, wherever possible.
In cases where the printout prints a non-field, we enclose
that information in square brackets, such as:
perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU]
perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER]
This way users can use filter expressions more intuitively: all
fields that show up as 'primary' (non-bracketed) information is
filterable.
This patch harmonizes the field names for all irq, bkl, power,
sched and timer events.
We might in fact think about dropping the print format bit of
generic tracepoints altogether, and just print the fields that
are being recorded.
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 09:50:39 +00:00
|
|
|
__field( void *, hrtimer )
|
2009-08-10 02:51:23 +00:00
|
|
|
__field( s64, now )
|
2010-08-18 22:33:13 +00:00
|
|
|
__field( void *, function)
|
2009-08-10 02:51:23 +00:00
|
|
|
),
|
|
|
|
|
|
|
|
|
|
TP_fast_assign(
|
events: Harmonize event field names and print output names
Now that we can filter based on fields via perf record, people
will start using filter expressions and will expect them to
be obvious.
The primary way to see which fields are available is by looking
at the trace output, such as:
gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer
While 'irq==0' filters work, the 'handler==<x>' filter expression
does not work:
$ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1
Error: failed to set filter with 22 (Invalid argument)
The problem is that while an 'irq' field exists and is recognized
as a filter field - 'handler' does not exist - its name is 'name'
in the output.
To solve this, we need to synchronize the printout and the field
names, wherever possible.
In cases where the printout prints a non-field, we enclose
that information in square brackets, such as:
perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU]
perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER]
This way users can use filter expressions more intuitively: all
fields that show up as 'primary' (non-bracketed) information is
filterable.
This patch harmonizes the field names for all irq, bkl, power,
sched and timer events.
We might in fact think about dropping the print format bit of
generic tracepoints altogether, and just print the fields that
are being recorded.
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 09:50:39 +00:00
|
|
|
__entry->hrtimer = hrtimer;
|
2016-12-25 10:38:40 +00:00
|
|
|
__entry->now = *now;
|
2010-08-18 22:33:13 +00:00
|
|
|
__entry->function = hrtimer->function;
|
2009-08-10 02:51:23 +00:00
|
|
|
),
|
|
|
|
|
|
2010-08-18 22:33:13 +00:00
|
|
|
TP_printk("hrtimer=%p function=%pf now=%llu", __entry->hrtimer, __entry->function,
|
2016-12-25 10:38:40 +00:00
|
|
|
(unsigned long long) __entry->now)
|
|
|
|
|
);
|
2009-08-10 02:51:23 +00:00
|
|
|
|
2010-05-24 08:23:15 +00:00
|
|
|
DECLARE_EVENT_CLASS(hrtimer_class,
|
2009-08-10 02:51:23 +00:00
|
|
|
|
events: Harmonize event field names and print output names
Now that we can filter based on fields via perf record, people
will start using filter expressions and will expect them to
be obvious.
The primary way to see which fields are available is by looking
at the trace output, such as:
gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer
While 'irq==0' filters work, the 'handler==<x>' filter expression
does not work:
$ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1
Error: failed to set filter with 22 (Invalid argument)
The problem is that while an 'irq' field exists and is recognized
as a filter field - 'handler' does not exist - its name is 'name'
in the output.
To solve this, we need to synchronize the printout and the field
names, wherever possible.
In cases where the printout prints a non-field, we enclose
that information in square brackets, such as:
perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU]
perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER]
This way users can use filter expressions more intuitively: all
fields that show up as 'primary' (non-bracketed) information is
filterable.
This patch harmonizes the field names for all irq, bkl, power,
sched and timer events.
We might in fact think about dropping the print format bit of
generic tracepoints altogether, and just print the fields that
are being recorded.
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 09:50:39 +00:00
|
|
|
TP_PROTO(struct hrtimer *hrtimer),
|
2009-08-10 02:51:23 +00:00
|
|
|
|
events: Harmonize event field names and print output names
Now that we can filter based on fields via perf record, people
will start using filter expressions and will expect them to
be obvious.
The primary way to see which fields are available is by looking
at the trace output, such as:
gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer
While 'irq==0' filters work, the 'handler==<x>' filter expression
does not work:
$ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1
Error: failed to set filter with 22 (Invalid argument)
The problem is that while an 'irq' field exists and is recognized
as a filter field - 'handler' does not exist - its name is 'name'
in the output.
To solve this, we need to synchronize the printout and the field
names, wherever possible.
In cases where the printout prints a non-field, we enclose
that information in square brackets, such as:
perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU]
perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER]
This way users can use filter expressions more intuitively: all
fields that show up as 'primary' (non-bracketed) information is
filterable.
This patch harmonizes the field names for all irq, bkl, power,
sched and timer events.
We might in fact think about dropping the print format bit of
generic tracepoints altogether, and just print the fields that
are being recorded.
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 09:50:39 +00:00
|
|
|
TP_ARGS(hrtimer),
|
2009-08-10 02:51:23 +00:00
|
|
|
|
|
|
|
|
TP_STRUCT__entry(
|
events: Harmonize event field names and print output names
Now that we can filter based on fields via perf record, people
will start using filter expressions and will expect them to
be obvious.
The primary way to see which fields are available is by looking
at the trace output, such as:
gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer
While 'irq==0' filters work, the 'handler==<x>' filter expression
does not work:
$ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1
Error: failed to set filter with 22 (Invalid argument)
The problem is that while an 'irq' field exists and is recognized
as a filter field - 'handler' does not exist - its name is 'name'
in the output.
To solve this, we need to synchronize the printout and the field
names, wherever possible.
In cases where the printout prints a non-field, we enclose
that information in square brackets, such as:
perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU]
perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER]
This way users can use filter expressions more intuitively: all
fields that show up as 'primary' (non-bracketed) information is
filterable.
This patch harmonizes the field names for all irq, bkl, power,
sched and timer events.
We might in fact think about dropping the print format bit of
generic tracepoints altogether, and just print the fields that
are being recorded.
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 09:50:39 +00:00
|
|
|
__field( void *, hrtimer )
|
2009-08-10 02:51:23 +00:00
|
|
|
),
|
|
|
|
|
|
|
|
|
|
TP_fast_assign(
|
events: Harmonize event field names and print output names
Now that we can filter based on fields via perf record, people
will start using filter expressions and will expect them to
be obvious.
The primary way to see which fields are available is by looking
at the trace output, such as:
gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer
While 'irq==0' filters work, the 'handler==<x>' filter expression
does not work:
$ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1
Error: failed to set filter with 22 (Invalid argument)
The problem is that while an 'irq' field exists and is recognized
as a filter field - 'handler' does not exist - its name is 'name'
in the output.
To solve this, we need to synchronize the printout and the field
names, wherever possible.
In cases where the printout prints a non-field, we enclose
that information in square brackets, such as:
perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU]
perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER]
This way users can use filter expressions more intuitively: all
fields that show up as 'primary' (non-bracketed) information is
filterable.
This patch harmonizes the field names for all irq, bkl, power,
sched and timer events.
We might in fact think about dropping the print format bit of
generic tracepoints altogether, and just print the fields that
are being recorded.
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 09:50:39 +00:00
|
|
|
__entry->hrtimer = hrtimer;
|
2009-08-10 02:51:23 +00:00
|
|
|
),
|
|
|
|
|
|
events: Harmonize event field names and print output names
Now that we can filter based on fields via perf record, people
will start using filter expressions and will expect them to
be obvious.
The primary way to see which fields are available is by looking
at the trace output, such as:
gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer
While 'irq==0' filters work, the 'handler==<x>' filter expression
does not work:
$ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1
Error: failed to set filter with 22 (Invalid argument)
The problem is that while an 'irq' field exists and is recognized
as a filter field - 'handler' does not exist - its name is 'name'
in the output.
To solve this, we need to synchronize the printout and the field
names, wherever possible.
In cases where the printout prints a non-field, we enclose
that information in square brackets, such as:
perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU]
perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER]
This way users can use filter expressions more intuitively: all
fields that show up as 'primary' (non-bracketed) information is
filterable.
This patch harmonizes the field names for all irq, bkl, power,
sched and timer events.
We might in fact think about dropping the print format bit of
generic tracepoints altogether, and just print the fields that
are being recorded.
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 09:50:39 +00:00
|
|
|
TP_printk("hrtimer=%p", __entry->hrtimer)
|
2009-08-10 02:51:23 +00:00
|
|
|
);
|
|
|
|
|
|
|
|
|
|
/**
|
2010-05-24 08:23:15 +00:00
|
|
|
* hrtimer_expire_exit - called immediately after the hrtimer callback returns
|
2013-03-16 11:53:05 +00:00
|
|
|
* @hrtimer: pointer to struct hrtimer
|
2010-05-24 08:23:15 +00:00
|
|
|
*
|
|
|
|
|
* When used in combination with the hrtimer_expire_entry tracepoint we can
|
|
|
|
|
* determine the runtime of the callback function.
|
2009-08-10 02:51:23 +00:00
|
|
|
*/
|
2010-05-24 08:23:15 +00:00
|
|
|
DEFINE_EVENT(hrtimer_class, hrtimer_expire_exit,
|
2009-08-10 02:51:23 +00:00
|
|
|
|
events: Harmonize event field names and print output names
Now that we can filter based on fields via perf record, people
will start using filter expressions and will expect them to
be obvious.
The primary way to see which fields are available is by looking
at the trace output, such as:
gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer
cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer
While 'irq==0' filters work, the 'handler==<x>' filter expression
does not work:
$ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1
Error: failed to set filter with 22 (Invalid argument)
The problem is that while an 'irq' field exists and is recognized
as a filter field - 'handler' does not exist - its name is 'name'
in the output.
To solve this, we need to synchronize the printout and the field
names, wherever possible.
In cases where the printout prints a non-field, we enclose
that information in square brackets, such as:
perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU]
perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER]
This way users can use filter expressions more intuitively: all
fields that show up as 'primary' (non-bracketed) information is
filterable.
This patch harmonizes the field names for all irq, bkl, power,
sched and timer events.
We might in fact think about dropping the print format bit of
generic tracepoints altogether, and just print the fields that
are being recorded.
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 09:50:39 +00:00
|
|
|
TP_PROTO(struct hrtimer *hrtimer),
|
2009-08-10 02:51:23 +00:00
|
|
|
|
2010-05-24 08:23:15 +00:00
|
|
|
TP_ARGS(hrtimer)
|
|
|
|
|
);
|
2009-08-10 02:51:23 +00:00
|
|
|
|
2010-05-24 08:23:15 +00:00
|
|
|
/**
|
|
|
|
|
* hrtimer_cancel - called when the hrtimer is canceled
|
|
|
|
|
* @hrtimer: pointer to struct hrtimer
|
|
|
|
|
*/
|
|
|
|
|
DEFINE_EVENT(hrtimer_class, hrtimer_cancel,
|
2009-08-10 02:51:23 +00:00
|
|
|
|
2010-05-24 08:23:15 +00:00
|
|
|
TP_PROTO(struct hrtimer *hrtimer),
|
2009-08-10 02:51:23 +00:00
|
|
|
|
2010-05-24 08:23:15 +00:00
|
|
|
TP_ARGS(hrtimer)
|
2009-08-10 02:51:23 +00:00
|
|
|
);
|
|
|
|
|
|
2009-08-10 02:52:30 +00:00
|
|
|
/**
|
|
|
|
|
* itimer_state - called when itimer is started or canceled
|
|
|
|
|
* @which: name of the interval timer
|
|
|
|
|
* @value: the itimers value, itimer is canceled if value->it_value is
|
|
|
|
|
* zero, otherwise it is started
|
|
|
|
|
* @expires: the itimers expiry time
|
|
|
|
|
*/
|
|
|
|
|
TRACE_EVENT(itimer_state,
|
|
|
|
|
|
|
|
|
|
TP_PROTO(int which, const struct itimerval *const value,
|
2017-01-31 03:09:35 +00:00
|
|
|
unsigned long long expires),
|
2009-08-10 02:52:30 +00:00
|
|
|
|
|
|
|
|
TP_ARGS(which, value, expires),
|
|
|
|
|
|
|
|
|
|
TP_STRUCT__entry(
|
2017-01-31 03:09:35 +00:00
|
|
|
__field( int, which )
|
|
|
|
|
__field( unsigned long long, expires )
|
|
|
|
|
__field( long, value_sec )
|
|
|
|
|
__field( long, value_usec )
|
|
|
|
|
__field( long, interval_sec )
|
|
|
|
|
__field( long, interval_usec )
|
2009-08-10 02:52:30 +00:00
|
|
|
),
|
|
|
|
|
|
|
|
|
|
TP_fast_assign(
|
|
|
|
|
__entry->which = which;
|
|
|
|
|
__entry->expires = expires;
|
|
|
|
|
__entry->value_sec = value->it_value.tv_sec;
|
|
|
|
|
__entry->value_usec = value->it_value.tv_usec;
|
|
|
|
|
__entry->interval_sec = value->it_interval.tv_sec;
|
|
|
|
|
__entry->interval_usec = value->it_interval.tv_usec;
|
|
|
|
|
),
|
|
|
|
|
|
2009-12-10 12:23:19 +00:00
|
|
|
TP_printk("which=%d expires=%llu it_value=%ld.%ld it_interval=%ld.%ld",
|
2017-01-31 03:09:35 +00:00
|
|
|
__entry->which, __entry->expires,
|
2009-08-10 02:52:30 +00:00
|
|
|
__entry->value_sec, __entry->value_usec,
|
|
|
|
|
__entry->interval_sec, __entry->interval_usec)
|
|
|
|
|
);
|
|
|
|
|
|
|
|
|
|
/**
|
|
|
|
|
* itimer_expire - called when itimer expires
|
|
|
|
|
* @which: type of the interval timer
|
|
|
|
|
* @pid: pid of the process which owns the timer
|
|
|
|
|
* @now: current time, used to calculate the latency of itimer
|
|
|
|
|
*/
|
|
|
|
|
TRACE_EVENT(itimer_expire,
|
|
|
|
|
|
2017-01-31 03:09:35 +00:00
|
|
|
TP_PROTO(int which, struct pid *pid, unsigned long long now),
|
2009-08-10 02:52:30 +00:00
|
|
|
|
|
|
|
|
TP_ARGS(which, pid, now),
|
|
|
|
|
|
|
|
|
|
TP_STRUCT__entry(
|
2017-01-31 03:09:35 +00:00
|
|
|
__field( int , which )
|
|
|
|
|
__field( pid_t, pid )
|
|
|
|
|
__field( unsigned long long, now )
|
2009-08-10 02:52:30 +00:00
|
|
|
),
|
|
|
|
|
|
|
|
|
|
TP_fast_assign(
|
|
|
|
|
__entry->which = which;
|
|
|
|
|
__entry->now = now;
|
|
|
|
|
__entry->pid = pid_nr(pid);
|
|
|
|
|
),
|
|
|
|
|
|
2009-12-10 12:23:19 +00:00
|
|
|
TP_printk("which=%d pid=%d now=%llu", __entry->which,
|
2017-01-31 03:09:35 +00:00
|
|
|
(int) __entry->pid, __entry->now)
|
2009-08-10 02:52:30 +00:00
|
|
|
);
|
|
|
|
|
|
2013-04-20 15:35:50 +00:00
|
|
|
#ifdef CONFIG_NO_HZ_COMMON
|
2015-12-11 02:27:25 +00:00
|
|
|
|
|
|
|
|
#define TICK_DEP_NAMES \
|
tracing: Fix tick_stop tracepoint symbols for user export
The symbols used in the tick_stop tracepoint were not being converted
properly into integers in the trace_stop format file. Instead we had this:
print fmt: "success=%d dependency=%s", REC->success,
__print_symbolic(REC->dependency, { 0, "NONE" },
{ (1 << TICK_DEP_BIT_POSIX_TIMER), "POSIX_TIMER" },
{ (1 << TICK_DEP_BIT_PERF_EVENTS), "PERF_EVENTS" },
{ (1 << TICK_DEP_BIT_SCHED), "SCHED" },
{ (1 << TICK_DEP_BIT_CLOCK_UNSTABLE), "CLOCK_UNSTABLE" })
User space tools have no idea how to parse "TICK_DEP_BIT_SCHED" or the other
symbols used to do the bit shifting. The reason is that the conversion was
done with using the TICK_DEP_MASK_* symbols which are just macros that
convert to the BIT shift itself (with the exception of NONE, which was
converted properly, because it doesn't use bits, and is defined as zero).
The TICK_DEP_BIT_* needs to be denoted by TRACE_DEFINE_ENUM() in order to
have this properly converted for user space tools to parse this event.
Cc: stable@vger.kernel.org
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Fixes: e6e6cc22e067 ("nohz: Use enum code for tick stop failure tracing message")
Reported-by: Luiz Capitulino <lcapitulino@redhat.com>
Tested-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-08-05 16:41:52 +00:00
|
|
|
tick_dep_mask_name(NONE) \
|
2015-12-11 02:27:25 +00:00
|
|
|
tick_dep_name(POSIX_TIMER) \
|
|
|
|
|
tick_dep_name(PERF_EVENTS) \
|
|
|
|
|
tick_dep_name(SCHED) \
|
|
|
|
|
tick_dep_name_end(CLOCK_UNSTABLE)
|
|
|
|
|
|
|
|
|
|
#undef tick_dep_name
|
tracing: Fix tick_stop tracepoint symbols for user export
The symbols used in the tick_stop tracepoint were not being converted
properly into integers in the trace_stop format file. Instead we had this:
print fmt: "success=%d dependency=%s", REC->success,
__print_symbolic(REC->dependency, { 0, "NONE" },
{ (1 << TICK_DEP_BIT_POSIX_TIMER), "POSIX_TIMER" },
{ (1 << TICK_DEP_BIT_PERF_EVENTS), "PERF_EVENTS" },
{ (1 << TICK_DEP_BIT_SCHED), "SCHED" },
{ (1 << TICK_DEP_BIT_CLOCK_UNSTABLE), "CLOCK_UNSTABLE" })
User space tools have no idea how to parse "TICK_DEP_BIT_SCHED" or the other
symbols used to do the bit shifting. The reason is that the conversion was
done with using the TICK_DEP_MASK_* symbols which are just macros that
convert to the BIT shift itself (with the exception of NONE, which was
converted properly, because it doesn't use bits, and is defined as zero).
The TICK_DEP_BIT_* needs to be denoted by TRACE_DEFINE_ENUM() in order to
have this properly converted for user space tools to parse this event.
Cc: stable@vger.kernel.org
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Fixes: e6e6cc22e067 ("nohz: Use enum code for tick stop failure tracing message")
Reported-by: Luiz Capitulino <lcapitulino@redhat.com>
Tested-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-08-05 16:41:52 +00:00
|
|
|
#undef tick_dep_mask_name
|
2015-12-11 02:27:25 +00:00
|
|
|
#undef tick_dep_name_end
|
|
|
|
|
|
tracing: Fix tick_stop tracepoint symbols for user export
The symbols used in the tick_stop tracepoint were not being converted
properly into integers in the trace_stop format file. Instead we had this:
print fmt: "success=%d dependency=%s", REC->success,
__print_symbolic(REC->dependency, { 0, "NONE" },
{ (1 << TICK_DEP_BIT_POSIX_TIMER), "POSIX_TIMER" },
{ (1 << TICK_DEP_BIT_PERF_EVENTS), "PERF_EVENTS" },
{ (1 << TICK_DEP_BIT_SCHED), "SCHED" },
{ (1 << TICK_DEP_BIT_CLOCK_UNSTABLE), "CLOCK_UNSTABLE" })
User space tools have no idea how to parse "TICK_DEP_BIT_SCHED" or the other
symbols used to do the bit shifting. The reason is that the conversion was
done with using the TICK_DEP_MASK_* symbols which are just macros that
convert to the BIT shift itself (with the exception of NONE, which was
converted properly, because it doesn't use bits, and is defined as zero).
The TICK_DEP_BIT_* needs to be denoted by TRACE_DEFINE_ENUM() in order to
have this properly converted for user space tools to parse this event.
Cc: stable@vger.kernel.org
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Fixes: e6e6cc22e067 ("nohz: Use enum code for tick stop failure tracing message")
Reported-by: Luiz Capitulino <lcapitulino@redhat.com>
Tested-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-08-05 16:41:52 +00:00
|
|
|
/* The MASK will convert to their bits and they need to be processed too */
|
|
|
|
|
#define tick_dep_name(sdep) TRACE_DEFINE_ENUM(TICK_DEP_BIT_##sdep); \
|
|
|
|
|
TRACE_DEFINE_ENUM(TICK_DEP_MASK_##sdep);
|
|
|
|
|
#define tick_dep_name_end(sdep) TRACE_DEFINE_ENUM(TICK_DEP_BIT_##sdep); \
|
|
|
|
|
TRACE_DEFINE_ENUM(TICK_DEP_MASK_##sdep);
|
|
|
|
|
/* NONE only has a mask defined for it */
|
|
|
|
|
#define tick_dep_mask_name(sdep) TRACE_DEFINE_ENUM(TICK_DEP_MASK_##sdep);
|
2015-12-11 02:27:25 +00:00
|
|
|
|
|
|
|
|
TICK_DEP_NAMES
|
|
|
|
|
|
|
|
|
|
#undef tick_dep_name
|
tracing: Fix tick_stop tracepoint symbols for user export
The symbols used in the tick_stop tracepoint were not being converted
properly into integers in the trace_stop format file. Instead we had this:
print fmt: "success=%d dependency=%s", REC->success,
__print_symbolic(REC->dependency, { 0, "NONE" },
{ (1 << TICK_DEP_BIT_POSIX_TIMER), "POSIX_TIMER" },
{ (1 << TICK_DEP_BIT_PERF_EVENTS), "PERF_EVENTS" },
{ (1 << TICK_DEP_BIT_SCHED), "SCHED" },
{ (1 << TICK_DEP_BIT_CLOCK_UNSTABLE), "CLOCK_UNSTABLE" })
User space tools have no idea how to parse "TICK_DEP_BIT_SCHED" or the other
symbols used to do the bit shifting. The reason is that the conversion was
done with using the TICK_DEP_MASK_* symbols which are just macros that
convert to the BIT shift itself (with the exception of NONE, which was
converted properly, because it doesn't use bits, and is defined as zero).
The TICK_DEP_BIT_* needs to be denoted by TRACE_DEFINE_ENUM() in order to
have this properly converted for user space tools to parse this event.
Cc: stable@vger.kernel.org
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Fixes: e6e6cc22e067 ("nohz: Use enum code for tick stop failure tracing message")
Reported-by: Luiz Capitulino <lcapitulino@redhat.com>
Tested-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-08-05 16:41:52 +00:00
|
|
|
#undef tick_dep_mask_name
|
2015-12-11 02:27:25 +00:00
|
|
|
#undef tick_dep_name_end
|
|
|
|
|
|
|
|
|
|
#define tick_dep_name(sdep) { TICK_DEP_MASK_##sdep, #sdep },
|
tracing: Fix tick_stop tracepoint symbols for user export
The symbols used in the tick_stop tracepoint were not being converted
properly into integers in the trace_stop format file. Instead we had this:
print fmt: "success=%d dependency=%s", REC->success,
__print_symbolic(REC->dependency, { 0, "NONE" },
{ (1 << TICK_DEP_BIT_POSIX_TIMER), "POSIX_TIMER" },
{ (1 << TICK_DEP_BIT_PERF_EVENTS), "PERF_EVENTS" },
{ (1 << TICK_DEP_BIT_SCHED), "SCHED" },
{ (1 << TICK_DEP_BIT_CLOCK_UNSTABLE), "CLOCK_UNSTABLE" })
User space tools have no idea how to parse "TICK_DEP_BIT_SCHED" or the other
symbols used to do the bit shifting. The reason is that the conversion was
done with using the TICK_DEP_MASK_* symbols which are just macros that
convert to the BIT shift itself (with the exception of NONE, which was
converted properly, because it doesn't use bits, and is defined as zero).
The TICK_DEP_BIT_* needs to be denoted by TRACE_DEFINE_ENUM() in order to
have this properly converted for user space tools to parse this event.
Cc: stable@vger.kernel.org
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Fixes: e6e6cc22e067 ("nohz: Use enum code for tick stop failure tracing message")
Reported-by: Luiz Capitulino <lcapitulino@redhat.com>
Tested-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-08-05 16:41:52 +00:00
|
|
|
#define tick_dep_mask_name(sdep) { TICK_DEP_MASK_##sdep, #sdep },
|
2015-12-11 02:27:25 +00:00
|
|
|
#define tick_dep_name_end(sdep) { TICK_DEP_MASK_##sdep, #sdep }
|
|
|
|
|
|
|
|
|
|
#define show_tick_dep_name(val) \
|
|
|
|
|
__print_symbolic(val, TICK_DEP_NAMES)
|
|
|
|
|
|
2013-04-20 15:35:50 +00:00
|
|
|
TRACE_EVENT(tick_stop,
|
|
|
|
|
|
2015-12-11 02:27:25 +00:00
|
|
|
TP_PROTO(int success, int dependency),
|
2013-04-20 15:35:50 +00:00
|
|
|
|
2015-12-11 02:27:25 +00:00
|
|
|
TP_ARGS(success, dependency),
|
2013-04-20 15:35:50 +00:00
|
|
|
|
|
|
|
|
TP_STRUCT__entry(
|
|
|
|
|
__field( int , success )
|
2015-12-11 02:27:25 +00:00
|
|
|
__field( int , dependency )
|
2013-04-20 15:35:50 +00:00
|
|
|
),
|
|
|
|
|
|
|
|
|
|
TP_fast_assign(
|
|
|
|
|
__entry->success = success;
|
2015-12-11 02:27:25 +00:00
|
|
|
__entry->dependency = dependency;
|
2013-04-20 15:35:50 +00:00
|
|
|
),
|
|
|
|
|
|
2015-12-11 02:27:25 +00:00
|
|
|
TP_printk("success=%d dependency=%s", __entry->success, \
|
|
|
|
|
show_tick_dep_name(__entry->dependency))
|
2013-04-20 15:35:50 +00:00
|
|
|
);
|
|
|
|
|
#endif
|
|
|
|
|
|
2009-08-10 02:48:59 +00:00
|
|
|
#endif /* _TRACE_TIMER_H */
|
|
|
|
|
|
|
|
|
|
/* This part must be outside protection */
|
|
|
|
|
#include <trace/define_trace.h>
|