linux-stable/arch/s390/mm/dump_pagetables.c

250 lines
6.3 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
// SPDX-License-Identifier: GPL-2.0
s390/mm: add page table dumper This is more or less the same as the x86 page table dumper which was merged four years ago: 926e5392 "x86: add code to dump the (kernel) page tables for visual inspection by kernel developers". We add a file at /sys/kernel/debug/kernel_page_tables for debugging purposes so it's quite easy to see the kernel page table layout and possible odd mappings: ---[ Identity Mapping ]--- 0x0000000000000000-0x0000000000100000 1M PTE RW ---[ Kernel Image Start ]--- 0x0000000000100000-0x0000000000800000 7M PMD RO 0x0000000000800000-0x00000000008a9000 676K PTE RO 0x00000000008a9000-0x0000000000900000 348K PTE RW 0x0000000000900000-0x0000000001500000 12M PMD RW ---[ Kernel Image End ]--- 0x0000000001500000-0x0000000280000000 10219M PMD RW 0x0000000280000000-0x000003d280000000 3904G PUD I ---[ vmemmap Area ]--- 0x000003d280000000-0x000003d288c00000 140M PTE RW 0x000003d288c00000-0x000003d300000000 1908M PMD I 0x000003d300000000-0x000003e000000000 52G PUD I ---[ vmalloc Area ]--- 0x000003e000000000-0x000003e000009000 36K PTE RW 0x000003e000009000-0x000003e0000ee000 916K PTE I 0x000003e0000ee000-0x000003e000146000 352K PTE RW 0x000003e000146000-0x000003e000200000 744K PTE I 0x000003e000200000-0x000003e080000000 2046M PMD I 0x000003e080000000-0x0000040000000000 126G PUD I This usually makes only sense for kernel developers. The output with CONFIG_DEBUG_PAGEALLOC is not very helpful, because of the huge number of mapped out pages, however I decided for the time being to not add a !DEBUG_PAGEALLOC dependency. Maybe it's helpful for somebody even with that option. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-10-04 12:46:12 +00:00
#include <linux/seq_file.h>
#include <linux/debugfs.h>
#include <linux/sched.h>
s390/mm: add page table dumper This is more or less the same as the x86 page table dumper which was merged four years ago: 926e5392 "x86: add code to dump the (kernel) page tables for visual inspection by kernel developers". We add a file at /sys/kernel/debug/kernel_page_tables for debugging purposes so it's quite easy to see the kernel page table layout and possible odd mappings: ---[ Identity Mapping ]--- 0x0000000000000000-0x0000000000100000 1M PTE RW ---[ Kernel Image Start ]--- 0x0000000000100000-0x0000000000800000 7M PMD RO 0x0000000000800000-0x00000000008a9000 676K PTE RO 0x00000000008a9000-0x0000000000900000 348K PTE RW 0x0000000000900000-0x0000000001500000 12M PMD RW ---[ Kernel Image End ]--- 0x0000000001500000-0x0000000280000000 10219M PMD RW 0x0000000280000000-0x000003d280000000 3904G PUD I ---[ vmemmap Area ]--- 0x000003d280000000-0x000003d288c00000 140M PTE RW 0x000003d288c00000-0x000003d300000000 1908M PMD I 0x000003d300000000-0x000003e000000000 52G PUD I ---[ vmalloc Area ]--- 0x000003e000000000-0x000003e000009000 36K PTE RW 0x000003e000009000-0x000003e0000ee000 916K PTE I 0x000003e0000ee000-0x000003e000146000 352K PTE RW 0x000003e000146000-0x000003e000200000 744K PTE I 0x000003e000200000-0x000003e080000000 2046M PMD I 0x000003e080000000-0x0000040000000000 126G PUD I This usually makes only sense for kernel developers. The output with CONFIG_DEBUG_PAGEALLOC is not very helpful, because of the huge number of mapped out pages, however I decided for the time being to not add a !DEBUG_PAGEALLOC dependency. Maybe it's helpful for somebody even with that option. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-10-04 12:46:12 +00:00
#include <linux/mm.h>
#include <asm/sections.h>
#include <asm/pgtable.h>
static unsigned long max_addr;
struct addr_marker {
unsigned long start_address;
const char *name;
};
enum address_markers_idx {
IDENTITY_NR = 0,
KERNEL_START_NR,
KERNEL_END_NR,
VMEMMAP_NR,
VMALLOC_NR,
MODULES_NR,
s390/mm: add page table dumper This is more or less the same as the x86 page table dumper which was merged four years ago: 926e5392 "x86: add code to dump the (kernel) page tables for visual inspection by kernel developers". We add a file at /sys/kernel/debug/kernel_page_tables for debugging purposes so it's quite easy to see the kernel page table layout and possible odd mappings: ---[ Identity Mapping ]--- 0x0000000000000000-0x0000000000100000 1M PTE RW ---[ Kernel Image Start ]--- 0x0000000000100000-0x0000000000800000 7M PMD RO 0x0000000000800000-0x00000000008a9000 676K PTE RO 0x00000000008a9000-0x0000000000900000 348K PTE RW 0x0000000000900000-0x0000000001500000 12M PMD RW ---[ Kernel Image End ]--- 0x0000000001500000-0x0000000280000000 10219M PMD RW 0x0000000280000000-0x000003d280000000 3904G PUD I ---[ vmemmap Area ]--- 0x000003d280000000-0x000003d288c00000 140M PTE RW 0x000003d288c00000-0x000003d300000000 1908M PMD I 0x000003d300000000-0x000003e000000000 52G PUD I ---[ vmalloc Area ]--- 0x000003e000000000-0x000003e000009000 36K PTE RW 0x000003e000009000-0x000003e0000ee000 916K PTE I 0x000003e0000ee000-0x000003e000146000 352K PTE RW 0x000003e000146000-0x000003e000200000 744K PTE I 0x000003e000200000-0x000003e080000000 2046M PMD I 0x000003e080000000-0x0000040000000000 126G PUD I This usually makes only sense for kernel developers. The output with CONFIG_DEBUG_PAGEALLOC is not very helpful, because of the huge number of mapped out pages, however I decided for the time being to not add a !DEBUG_PAGEALLOC dependency. Maybe it's helpful for somebody even with that option. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-10-04 12:46:12 +00:00
};
static struct addr_marker address_markers[] = {
[IDENTITY_NR] = {0, "Identity Mapping"},
[KERNEL_START_NR] = {(unsigned long)_stext, "Kernel Image Start"},
[KERNEL_END_NR] = {(unsigned long)_end, "Kernel Image End"},
s390/mm: add page table dumper This is more or less the same as the x86 page table dumper which was merged four years ago: 926e5392 "x86: add code to dump the (kernel) page tables for visual inspection by kernel developers". We add a file at /sys/kernel/debug/kernel_page_tables for debugging purposes so it's quite easy to see the kernel page table layout and possible odd mappings: ---[ Identity Mapping ]--- 0x0000000000000000-0x0000000000100000 1M PTE RW ---[ Kernel Image Start ]--- 0x0000000000100000-0x0000000000800000 7M PMD RO 0x0000000000800000-0x00000000008a9000 676K PTE RO 0x00000000008a9000-0x0000000000900000 348K PTE RW 0x0000000000900000-0x0000000001500000 12M PMD RW ---[ Kernel Image End ]--- 0x0000000001500000-0x0000000280000000 10219M PMD RW 0x0000000280000000-0x000003d280000000 3904G PUD I ---[ vmemmap Area ]--- 0x000003d280000000-0x000003d288c00000 140M PTE RW 0x000003d288c00000-0x000003d300000000 1908M PMD I 0x000003d300000000-0x000003e000000000 52G PUD I ---[ vmalloc Area ]--- 0x000003e000000000-0x000003e000009000 36K PTE RW 0x000003e000009000-0x000003e0000ee000 916K PTE I 0x000003e0000ee000-0x000003e000146000 352K PTE RW 0x000003e000146000-0x000003e000200000 744K PTE I 0x000003e000200000-0x000003e080000000 2046M PMD I 0x000003e080000000-0x0000040000000000 126G PUD I This usually makes only sense for kernel developers. The output with CONFIG_DEBUG_PAGEALLOC is not very helpful, because of the huge number of mapped out pages, however I decided for the time being to not add a !DEBUG_PAGEALLOC dependency. Maybe it's helpful for somebody even with that option. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-10-04 12:46:12 +00:00
[VMEMMAP_NR] = {0, "vmemmap Area"},
[VMALLOC_NR] = {0, "vmalloc Area"},
[MODULES_NR] = {0, "Modules Area"},
s390/mm: add page table dumper This is more or less the same as the x86 page table dumper which was merged four years ago: 926e5392 "x86: add code to dump the (kernel) page tables for visual inspection by kernel developers". We add a file at /sys/kernel/debug/kernel_page_tables for debugging purposes so it's quite easy to see the kernel page table layout and possible odd mappings: ---[ Identity Mapping ]--- 0x0000000000000000-0x0000000000100000 1M PTE RW ---[ Kernel Image Start ]--- 0x0000000000100000-0x0000000000800000 7M PMD RO 0x0000000000800000-0x00000000008a9000 676K PTE RO 0x00000000008a9000-0x0000000000900000 348K PTE RW 0x0000000000900000-0x0000000001500000 12M PMD RW ---[ Kernel Image End ]--- 0x0000000001500000-0x0000000280000000 10219M PMD RW 0x0000000280000000-0x000003d280000000 3904G PUD I ---[ vmemmap Area ]--- 0x000003d280000000-0x000003d288c00000 140M PTE RW 0x000003d288c00000-0x000003d300000000 1908M PMD I 0x000003d300000000-0x000003e000000000 52G PUD I ---[ vmalloc Area ]--- 0x000003e000000000-0x000003e000009000 36K PTE RW 0x000003e000009000-0x000003e0000ee000 916K PTE I 0x000003e0000ee000-0x000003e000146000 352K PTE RW 0x000003e000146000-0x000003e000200000 744K PTE I 0x000003e000200000-0x000003e080000000 2046M PMD I 0x000003e080000000-0x0000040000000000 126G PUD I This usually makes only sense for kernel developers. The output with CONFIG_DEBUG_PAGEALLOC is not very helpful, because of the huge number of mapped out pages, however I decided for the time being to not add a !DEBUG_PAGEALLOC dependency. Maybe it's helpful for somebody even with that option. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-10-04 12:46:12 +00:00
{ -1, NULL }
};
struct pg_state {
int level;
unsigned int current_prot;
unsigned long start_address;
unsigned long current_address;
const struct addr_marker *marker;
};
static void print_prot(struct seq_file *m, unsigned int pr, int level)
{
static const char * const level_name[] =
{ "ASCE", "PGD", "PUD", "PMD", "PTE" };
seq_printf(m, "%s ", level_name[level]);
if (pr & _PAGE_INVALID) {
s390/mm: add page table dumper This is more or less the same as the x86 page table dumper which was merged four years ago: 926e5392 "x86: add code to dump the (kernel) page tables for visual inspection by kernel developers". We add a file at /sys/kernel/debug/kernel_page_tables for debugging purposes so it's quite easy to see the kernel page table layout and possible odd mappings: ---[ Identity Mapping ]--- 0x0000000000000000-0x0000000000100000 1M PTE RW ---[ Kernel Image Start ]--- 0x0000000000100000-0x0000000000800000 7M PMD RO 0x0000000000800000-0x00000000008a9000 676K PTE RO 0x00000000008a9000-0x0000000000900000 348K PTE RW 0x0000000000900000-0x0000000001500000 12M PMD RW ---[ Kernel Image End ]--- 0x0000000001500000-0x0000000280000000 10219M PMD RW 0x0000000280000000-0x000003d280000000 3904G PUD I ---[ vmemmap Area ]--- 0x000003d280000000-0x000003d288c00000 140M PTE RW 0x000003d288c00000-0x000003d300000000 1908M PMD I 0x000003d300000000-0x000003e000000000 52G PUD I ---[ vmalloc Area ]--- 0x000003e000000000-0x000003e000009000 36K PTE RW 0x000003e000009000-0x000003e0000ee000 916K PTE I 0x000003e0000ee000-0x000003e000146000 352K PTE RW 0x000003e000146000-0x000003e000200000 744K PTE I 0x000003e000200000-0x000003e080000000 2046M PMD I 0x000003e080000000-0x0000040000000000 126G PUD I This usually makes only sense for kernel developers. The output with CONFIG_DEBUG_PAGEALLOC is not very helpful, because of the huge number of mapped out pages, however I decided for the time being to not add a !DEBUG_PAGEALLOC dependency. Maybe it's helpful for somebody even with that option. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-10-04 12:46:12 +00:00
seq_printf(m, "I\n");
return;
}
seq_puts(m, (pr & _PAGE_PROTECT) ? "RO " : "RW ");
seq_puts(m, (pr & _PAGE_NOEXEC) ? "NX\n" : "X\n");
s390/mm: add page table dumper This is more or less the same as the x86 page table dumper which was merged four years ago: 926e5392 "x86: add code to dump the (kernel) page tables for visual inspection by kernel developers". We add a file at /sys/kernel/debug/kernel_page_tables for debugging purposes so it's quite easy to see the kernel page table layout and possible odd mappings: ---[ Identity Mapping ]--- 0x0000000000000000-0x0000000000100000 1M PTE RW ---[ Kernel Image Start ]--- 0x0000000000100000-0x0000000000800000 7M PMD RO 0x0000000000800000-0x00000000008a9000 676K PTE RO 0x00000000008a9000-0x0000000000900000 348K PTE RW 0x0000000000900000-0x0000000001500000 12M PMD RW ---[ Kernel Image End ]--- 0x0000000001500000-0x0000000280000000 10219M PMD RW 0x0000000280000000-0x000003d280000000 3904G PUD I ---[ vmemmap Area ]--- 0x000003d280000000-0x000003d288c00000 140M PTE RW 0x000003d288c00000-0x000003d300000000 1908M PMD I 0x000003d300000000-0x000003e000000000 52G PUD I ---[ vmalloc Area ]--- 0x000003e000000000-0x000003e000009000 36K PTE RW 0x000003e000009000-0x000003e0000ee000 916K PTE I 0x000003e0000ee000-0x000003e000146000 352K PTE RW 0x000003e000146000-0x000003e000200000 744K PTE I 0x000003e000200000-0x000003e080000000 2046M PMD I 0x000003e080000000-0x0000040000000000 126G PUD I This usually makes only sense for kernel developers. The output with CONFIG_DEBUG_PAGEALLOC is not very helpful, because of the huge number of mapped out pages, however I decided for the time being to not add a !DEBUG_PAGEALLOC dependency. Maybe it's helpful for somebody even with that option. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-10-04 12:46:12 +00:00
}
static void note_page(struct seq_file *m, struct pg_state *st,
unsigned int new_prot, int level)
{
static const char units[] = "KMGTPE";
int width = sizeof(unsigned long) * 2;
const char *unit = units;
unsigned int prot, cur;
unsigned long delta;
/*
* If we have a "break" in the series, we need to flush the state
* that we have now. "break" is either changing perms, levels or
* address space marker.
*/
prot = new_prot;
cur = st->current_prot;
if (!st->level) {
/* First entry */
st->current_prot = new_prot;
st->level = level;
st->marker = address_markers;
seq_printf(m, "---[ %s ]---\n", st->marker->name);
} else if (prot != cur || level != st->level ||
st->current_address >= st->marker[1].start_address) {
/* Print the actual finished series */
seq_printf(m, "0x%0*lx-0x%0*lx",
width, st->start_address,
width, st->current_address);
delta = (st->current_address - st->start_address) >> 10;
while (!(delta & 0x3ff) && unit[1]) {
delta >>= 10;
unit++;
}
seq_printf(m, "%9lu%c ", delta, *unit);
print_prot(m, st->current_prot, st->level);
if (st->current_address >= st->marker[1].start_address) {
st->marker++;
seq_printf(m, "---[ %s ]---\n", st->marker->name);
}
st->start_address = st->current_address;
st->current_prot = new_prot;
st->level = level;
}
}
/*
* The actual page table walker functions. In order to keep the
* implementation of print_prot() short, we only check and pass
* _PAGE_INVALID and _PAGE_PROTECT flags to note_page() if a region,
* segment or page table entry is invalid or read-only.
* After all it's just a hint that the current level being walked
* contains an invalid or read-only entry.
s390/mm: add page table dumper This is more or less the same as the x86 page table dumper which was merged four years ago: 926e5392 "x86: add code to dump the (kernel) page tables for visual inspection by kernel developers". We add a file at /sys/kernel/debug/kernel_page_tables for debugging purposes so it's quite easy to see the kernel page table layout and possible odd mappings: ---[ Identity Mapping ]--- 0x0000000000000000-0x0000000000100000 1M PTE RW ---[ Kernel Image Start ]--- 0x0000000000100000-0x0000000000800000 7M PMD RO 0x0000000000800000-0x00000000008a9000 676K PTE RO 0x00000000008a9000-0x0000000000900000 348K PTE RW 0x0000000000900000-0x0000000001500000 12M PMD RW ---[ Kernel Image End ]--- 0x0000000001500000-0x0000000280000000 10219M PMD RW 0x0000000280000000-0x000003d280000000 3904G PUD I ---[ vmemmap Area ]--- 0x000003d280000000-0x000003d288c00000 140M PTE RW 0x000003d288c00000-0x000003d300000000 1908M PMD I 0x000003d300000000-0x000003e000000000 52G PUD I ---[ vmalloc Area ]--- 0x000003e000000000-0x000003e000009000 36K PTE RW 0x000003e000009000-0x000003e0000ee000 916K PTE I 0x000003e0000ee000-0x000003e000146000 352K PTE RW 0x000003e000146000-0x000003e000200000 744K PTE I 0x000003e000200000-0x000003e080000000 2046M PMD I 0x000003e080000000-0x0000040000000000 126G PUD I This usually makes only sense for kernel developers. The output with CONFIG_DEBUG_PAGEALLOC is not very helpful, because of the huge number of mapped out pages, however I decided for the time being to not add a !DEBUG_PAGEALLOC dependency. Maybe it's helpful for somebody even with that option. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-10-04 12:46:12 +00:00
*/
static void walk_pte_level(struct seq_file *m, struct pg_state *st,
pmd_t *pmd, unsigned long addr)
{
unsigned int prot;
pte_t *pte;
int i;
for (i = 0; i < PTRS_PER_PTE && addr < max_addr; i++) {
st->current_address = addr;
pte = pte_offset_kernel(pmd, addr);
prot = pte_val(*pte) &
(_PAGE_PROTECT | _PAGE_INVALID | _PAGE_NOEXEC);
s390/mm: add page table dumper This is more or less the same as the x86 page table dumper which was merged four years ago: 926e5392 "x86: add code to dump the (kernel) page tables for visual inspection by kernel developers". We add a file at /sys/kernel/debug/kernel_page_tables for debugging purposes so it's quite easy to see the kernel page table layout and possible odd mappings: ---[ Identity Mapping ]--- 0x0000000000000000-0x0000000000100000 1M PTE RW ---[ Kernel Image Start ]--- 0x0000000000100000-0x0000000000800000 7M PMD RO 0x0000000000800000-0x00000000008a9000 676K PTE RO 0x00000000008a9000-0x0000000000900000 348K PTE RW 0x0000000000900000-0x0000000001500000 12M PMD RW ---[ Kernel Image End ]--- 0x0000000001500000-0x0000000280000000 10219M PMD RW 0x0000000280000000-0x000003d280000000 3904G PUD I ---[ vmemmap Area ]--- 0x000003d280000000-0x000003d288c00000 140M PTE RW 0x000003d288c00000-0x000003d300000000 1908M PMD I 0x000003d300000000-0x000003e000000000 52G PUD I ---[ vmalloc Area ]--- 0x000003e000000000-0x000003e000009000 36K PTE RW 0x000003e000009000-0x000003e0000ee000 916K PTE I 0x000003e0000ee000-0x000003e000146000 352K PTE RW 0x000003e000146000-0x000003e000200000 744K PTE I 0x000003e000200000-0x000003e080000000 2046M PMD I 0x000003e080000000-0x0000040000000000 126G PUD I This usually makes only sense for kernel developers. The output with CONFIG_DEBUG_PAGEALLOC is not very helpful, because of the huge number of mapped out pages, however I decided for the time being to not add a !DEBUG_PAGEALLOC dependency. Maybe it's helpful for somebody even with that option. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-10-04 12:46:12 +00:00
note_page(m, st, prot, 4);
addr += PAGE_SIZE;
}
}
static void walk_pmd_level(struct seq_file *m, struct pg_state *st,
pud_t *pud, unsigned long addr)
{
unsigned int prot;
pmd_t *pmd;
int i;
for (i = 0; i < PTRS_PER_PMD && addr < max_addr; i++) {
st->current_address = addr;
pmd = pmd_offset(pud, addr);
if (!pmd_none(*pmd)) {
if (pmd_large(*pmd)) {
prot = pmd_val(*pmd) &
(_SEGMENT_ENTRY_PROTECT |
_SEGMENT_ENTRY_NOEXEC);
s390/mm: add page table dumper This is more or less the same as the x86 page table dumper which was merged four years ago: 926e5392 "x86: add code to dump the (kernel) page tables for visual inspection by kernel developers". We add a file at /sys/kernel/debug/kernel_page_tables for debugging purposes so it's quite easy to see the kernel page table layout and possible odd mappings: ---[ Identity Mapping ]--- 0x0000000000000000-0x0000000000100000 1M PTE RW ---[ Kernel Image Start ]--- 0x0000000000100000-0x0000000000800000 7M PMD RO 0x0000000000800000-0x00000000008a9000 676K PTE RO 0x00000000008a9000-0x0000000000900000 348K PTE RW 0x0000000000900000-0x0000000001500000 12M PMD RW ---[ Kernel Image End ]--- 0x0000000001500000-0x0000000280000000 10219M PMD RW 0x0000000280000000-0x000003d280000000 3904G PUD I ---[ vmemmap Area ]--- 0x000003d280000000-0x000003d288c00000 140M PTE RW 0x000003d288c00000-0x000003d300000000 1908M PMD I 0x000003d300000000-0x000003e000000000 52G PUD I ---[ vmalloc Area ]--- 0x000003e000000000-0x000003e000009000 36K PTE RW 0x000003e000009000-0x000003e0000ee000 916K PTE I 0x000003e0000ee000-0x000003e000146000 352K PTE RW 0x000003e000146000-0x000003e000200000 744K PTE I 0x000003e000200000-0x000003e080000000 2046M PMD I 0x000003e080000000-0x0000040000000000 126G PUD I This usually makes only sense for kernel developers. The output with CONFIG_DEBUG_PAGEALLOC is not very helpful, because of the huge number of mapped out pages, however I decided for the time being to not add a !DEBUG_PAGEALLOC dependency. Maybe it's helpful for somebody even with that option. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-10-04 12:46:12 +00:00
note_page(m, st, prot, 3);
} else
walk_pte_level(m, st, pmd, addr);
} else
note_page(m, st, _PAGE_INVALID, 3);
addr += PMD_SIZE;
}
}
static void walk_pud_level(struct seq_file *m, struct pg_state *st,
p4d_t *p4d, unsigned long addr)
s390/mm: add page table dumper This is more or less the same as the x86 page table dumper which was merged four years ago: 926e5392 "x86: add code to dump the (kernel) page tables for visual inspection by kernel developers". We add a file at /sys/kernel/debug/kernel_page_tables for debugging purposes so it's quite easy to see the kernel page table layout and possible odd mappings: ---[ Identity Mapping ]--- 0x0000000000000000-0x0000000000100000 1M PTE RW ---[ Kernel Image Start ]--- 0x0000000000100000-0x0000000000800000 7M PMD RO 0x0000000000800000-0x00000000008a9000 676K PTE RO 0x00000000008a9000-0x0000000000900000 348K PTE RW 0x0000000000900000-0x0000000001500000 12M PMD RW ---[ Kernel Image End ]--- 0x0000000001500000-0x0000000280000000 10219M PMD RW 0x0000000280000000-0x000003d280000000 3904G PUD I ---[ vmemmap Area ]--- 0x000003d280000000-0x000003d288c00000 140M PTE RW 0x000003d288c00000-0x000003d300000000 1908M PMD I 0x000003d300000000-0x000003e000000000 52G PUD I ---[ vmalloc Area ]--- 0x000003e000000000-0x000003e000009000 36K PTE RW 0x000003e000009000-0x000003e0000ee000 916K PTE I 0x000003e0000ee000-0x000003e000146000 352K PTE RW 0x000003e000146000-0x000003e000200000 744K PTE I 0x000003e000200000-0x000003e080000000 2046M PMD I 0x000003e080000000-0x0000040000000000 126G PUD I This usually makes only sense for kernel developers. The output with CONFIG_DEBUG_PAGEALLOC is not very helpful, because of the huge number of mapped out pages, however I decided for the time being to not add a !DEBUG_PAGEALLOC dependency. Maybe it's helpful for somebody even with that option. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-10-04 12:46:12 +00:00
{
unsigned int prot;
s390/mm: add page table dumper This is more or less the same as the x86 page table dumper which was merged four years ago: 926e5392 "x86: add code to dump the (kernel) page tables for visual inspection by kernel developers". We add a file at /sys/kernel/debug/kernel_page_tables for debugging purposes so it's quite easy to see the kernel page table layout and possible odd mappings: ---[ Identity Mapping ]--- 0x0000000000000000-0x0000000000100000 1M PTE RW ---[ Kernel Image Start ]--- 0x0000000000100000-0x0000000000800000 7M PMD RO 0x0000000000800000-0x00000000008a9000 676K PTE RO 0x00000000008a9000-0x0000000000900000 348K PTE RW 0x0000000000900000-0x0000000001500000 12M PMD RW ---[ Kernel Image End ]--- 0x0000000001500000-0x0000000280000000 10219M PMD RW 0x0000000280000000-0x000003d280000000 3904G PUD I ---[ vmemmap Area ]--- 0x000003d280000000-0x000003d288c00000 140M PTE RW 0x000003d288c00000-0x000003d300000000 1908M PMD I 0x000003d300000000-0x000003e000000000 52G PUD I ---[ vmalloc Area ]--- 0x000003e000000000-0x000003e000009000 36K PTE RW 0x000003e000009000-0x000003e0000ee000 916K PTE I 0x000003e0000ee000-0x000003e000146000 352K PTE RW 0x000003e000146000-0x000003e000200000 744K PTE I 0x000003e000200000-0x000003e080000000 2046M PMD I 0x000003e080000000-0x0000040000000000 126G PUD I This usually makes only sense for kernel developers. The output with CONFIG_DEBUG_PAGEALLOC is not very helpful, because of the huge number of mapped out pages, however I decided for the time being to not add a !DEBUG_PAGEALLOC dependency. Maybe it's helpful for somebody even with that option. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-10-04 12:46:12 +00:00
pud_t *pud;
int i;
for (i = 0; i < PTRS_PER_PUD && addr < max_addr; i++) {
st->current_address = addr;
pud = pud_offset(p4d, addr);
s390/mm: add page table dumper This is more or less the same as the x86 page table dumper which was merged four years ago: 926e5392 "x86: add code to dump the (kernel) page tables for visual inspection by kernel developers". We add a file at /sys/kernel/debug/kernel_page_tables for debugging purposes so it's quite easy to see the kernel page table layout and possible odd mappings: ---[ Identity Mapping ]--- 0x0000000000000000-0x0000000000100000 1M PTE RW ---[ Kernel Image Start ]--- 0x0000000000100000-0x0000000000800000 7M PMD RO 0x0000000000800000-0x00000000008a9000 676K PTE RO 0x00000000008a9000-0x0000000000900000 348K PTE RW 0x0000000000900000-0x0000000001500000 12M PMD RW ---[ Kernel Image End ]--- 0x0000000001500000-0x0000000280000000 10219M PMD RW 0x0000000280000000-0x000003d280000000 3904G PUD I ---[ vmemmap Area ]--- 0x000003d280000000-0x000003d288c00000 140M PTE RW 0x000003d288c00000-0x000003d300000000 1908M PMD I 0x000003d300000000-0x000003e000000000 52G PUD I ---[ vmalloc Area ]--- 0x000003e000000000-0x000003e000009000 36K PTE RW 0x000003e000009000-0x000003e0000ee000 916K PTE I 0x000003e0000ee000-0x000003e000146000 352K PTE RW 0x000003e000146000-0x000003e000200000 744K PTE I 0x000003e000200000-0x000003e080000000 2046M PMD I 0x000003e080000000-0x0000040000000000 126G PUD I This usually makes only sense for kernel developers. The output with CONFIG_DEBUG_PAGEALLOC is not very helpful, because of the huge number of mapped out pages, however I decided for the time being to not add a !DEBUG_PAGEALLOC dependency. Maybe it's helpful for somebody even with that option. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-10-04 12:46:12 +00:00
if (!pud_none(*pud))
if (pud_large(*pud)) {
prot = pud_val(*pud) &
(_REGION_ENTRY_PROTECT |
_REGION_ENTRY_NOEXEC);
note_page(m, st, prot, 2);
} else
walk_pmd_level(m, st, pud, addr);
s390/mm: add page table dumper This is more or less the same as the x86 page table dumper which was merged four years ago: 926e5392 "x86: add code to dump the (kernel) page tables for visual inspection by kernel developers". We add a file at /sys/kernel/debug/kernel_page_tables for debugging purposes so it's quite easy to see the kernel page table layout and possible odd mappings: ---[ Identity Mapping ]--- 0x0000000000000000-0x0000000000100000 1M PTE RW ---[ Kernel Image Start ]--- 0x0000000000100000-0x0000000000800000 7M PMD RO 0x0000000000800000-0x00000000008a9000 676K PTE RO 0x00000000008a9000-0x0000000000900000 348K PTE RW 0x0000000000900000-0x0000000001500000 12M PMD RW ---[ Kernel Image End ]--- 0x0000000001500000-0x0000000280000000 10219M PMD RW 0x0000000280000000-0x000003d280000000 3904G PUD I ---[ vmemmap Area ]--- 0x000003d280000000-0x000003d288c00000 140M PTE RW 0x000003d288c00000-0x000003d300000000 1908M PMD I 0x000003d300000000-0x000003e000000000 52G PUD I ---[ vmalloc Area ]--- 0x000003e000000000-0x000003e000009000 36K PTE RW 0x000003e000009000-0x000003e0000ee000 916K PTE I 0x000003e0000ee000-0x000003e000146000 352K PTE RW 0x000003e000146000-0x000003e000200000 744K PTE I 0x000003e000200000-0x000003e080000000 2046M PMD I 0x000003e080000000-0x0000040000000000 126G PUD I This usually makes only sense for kernel developers. The output with CONFIG_DEBUG_PAGEALLOC is not very helpful, because of the huge number of mapped out pages, however I decided for the time being to not add a !DEBUG_PAGEALLOC dependency. Maybe it's helpful for somebody even with that option. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-10-04 12:46:12 +00:00
else
note_page(m, st, _PAGE_INVALID, 2);
addr += PUD_SIZE;
}
}
static void walk_p4d_level(struct seq_file *m, struct pg_state *st,
pgd_t *pgd, unsigned long addr)
{
p4d_t *p4d;
int i;
for (i = 0; i < PTRS_PER_P4D && addr < max_addr; i++) {
st->current_address = addr;
p4d = p4d_offset(pgd, addr);
if (!p4d_none(*p4d))
walk_pud_level(m, st, p4d, addr);
else
note_page(m, st, _PAGE_INVALID, 2);
addr += P4D_SIZE;
}
}
s390/mm: add page table dumper This is more or less the same as the x86 page table dumper which was merged four years ago: 926e5392 "x86: add code to dump the (kernel) page tables for visual inspection by kernel developers". We add a file at /sys/kernel/debug/kernel_page_tables for debugging purposes so it's quite easy to see the kernel page table layout and possible odd mappings: ---[ Identity Mapping ]--- 0x0000000000000000-0x0000000000100000 1M PTE RW ---[ Kernel Image Start ]--- 0x0000000000100000-0x0000000000800000 7M PMD RO 0x0000000000800000-0x00000000008a9000 676K PTE RO 0x00000000008a9000-0x0000000000900000 348K PTE RW 0x0000000000900000-0x0000000001500000 12M PMD RW ---[ Kernel Image End ]--- 0x0000000001500000-0x0000000280000000 10219M PMD RW 0x0000000280000000-0x000003d280000000 3904G PUD I ---[ vmemmap Area ]--- 0x000003d280000000-0x000003d288c00000 140M PTE RW 0x000003d288c00000-0x000003d300000000 1908M PMD I 0x000003d300000000-0x000003e000000000 52G PUD I ---[ vmalloc Area ]--- 0x000003e000000000-0x000003e000009000 36K PTE RW 0x000003e000009000-0x000003e0000ee000 916K PTE I 0x000003e0000ee000-0x000003e000146000 352K PTE RW 0x000003e000146000-0x000003e000200000 744K PTE I 0x000003e000200000-0x000003e080000000 2046M PMD I 0x000003e080000000-0x0000040000000000 126G PUD I This usually makes only sense for kernel developers. The output with CONFIG_DEBUG_PAGEALLOC is not very helpful, because of the huge number of mapped out pages, however I decided for the time being to not add a !DEBUG_PAGEALLOC dependency. Maybe it's helpful for somebody even with that option. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-10-04 12:46:12 +00:00
static void walk_pgd_level(struct seq_file *m)
{
unsigned long addr = 0;
struct pg_state st;
pgd_t *pgd;
int i;
memset(&st, 0, sizeof(st));
for (i = 0; i < PTRS_PER_PGD && addr < max_addr; i++) {
st.current_address = addr;
pgd = pgd_offset_k(addr);
if (!pgd_none(*pgd))
walk_p4d_level(m, &st, pgd, addr);
s390/mm: add page table dumper This is more or less the same as the x86 page table dumper which was merged four years ago: 926e5392 "x86: add code to dump the (kernel) page tables for visual inspection by kernel developers". We add a file at /sys/kernel/debug/kernel_page_tables for debugging purposes so it's quite easy to see the kernel page table layout and possible odd mappings: ---[ Identity Mapping ]--- 0x0000000000000000-0x0000000000100000 1M PTE RW ---[ Kernel Image Start ]--- 0x0000000000100000-0x0000000000800000 7M PMD RO 0x0000000000800000-0x00000000008a9000 676K PTE RO 0x00000000008a9000-0x0000000000900000 348K PTE RW 0x0000000000900000-0x0000000001500000 12M PMD RW ---[ Kernel Image End ]--- 0x0000000001500000-0x0000000280000000 10219M PMD RW 0x0000000280000000-0x000003d280000000 3904G PUD I ---[ vmemmap Area ]--- 0x000003d280000000-0x000003d288c00000 140M PTE RW 0x000003d288c00000-0x000003d300000000 1908M PMD I 0x000003d300000000-0x000003e000000000 52G PUD I ---[ vmalloc Area ]--- 0x000003e000000000-0x000003e000009000 36K PTE RW 0x000003e000009000-0x000003e0000ee000 916K PTE I 0x000003e0000ee000-0x000003e000146000 352K PTE RW 0x000003e000146000-0x000003e000200000 744K PTE I 0x000003e000200000-0x000003e080000000 2046M PMD I 0x000003e080000000-0x0000040000000000 126G PUD I This usually makes only sense for kernel developers. The output with CONFIG_DEBUG_PAGEALLOC is not very helpful, because of the huge number of mapped out pages, however I decided for the time being to not add a !DEBUG_PAGEALLOC dependency. Maybe it's helpful for somebody even with that option. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-10-04 12:46:12 +00:00
else
note_page(m, &st, _PAGE_INVALID, 1);
addr += PGDIR_SIZE;
cond_resched();
s390/mm: add page table dumper This is more or less the same as the x86 page table dumper which was merged four years ago: 926e5392 "x86: add code to dump the (kernel) page tables for visual inspection by kernel developers". We add a file at /sys/kernel/debug/kernel_page_tables for debugging purposes so it's quite easy to see the kernel page table layout and possible odd mappings: ---[ Identity Mapping ]--- 0x0000000000000000-0x0000000000100000 1M PTE RW ---[ Kernel Image Start ]--- 0x0000000000100000-0x0000000000800000 7M PMD RO 0x0000000000800000-0x00000000008a9000 676K PTE RO 0x00000000008a9000-0x0000000000900000 348K PTE RW 0x0000000000900000-0x0000000001500000 12M PMD RW ---[ Kernel Image End ]--- 0x0000000001500000-0x0000000280000000 10219M PMD RW 0x0000000280000000-0x000003d280000000 3904G PUD I ---[ vmemmap Area ]--- 0x000003d280000000-0x000003d288c00000 140M PTE RW 0x000003d288c00000-0x000003d300000000 1908M PMD I 0x000003d300000000-0x000003e000000000 52G PUD I ---[ vmalloc Area ]--- 0x000003e000000000-0x000003e000009000 36K PTE RW 0x000003e000009000-0x000003e0000ee000 916K PTE I 0x000003e0000ee000-0x000003e000146000 352K PTE RW 0x000003e000146000-0x000003e000200000 744K PTE I 0x000003e000200000-0x000003e080000000 2046M PMD I 0x000003e080000000-0x0000040000000000 126G PUD I This usually makes only sense for kernel developers. The output with CONFIG_DEBUG_PAGEALLOC is not very helpful, because of the huge number of mapped out pages, however I decided for the time being to not add a !DEBUG_PAGEALLOC dependency. Maybe it's helpful for somebody even with that option. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-10-04 12:46:12 +00:00
}
/* Flush out the last page */
st.current_address = max_addr;
note_page(m, &st, 0, 0);
}
static int ptdump_show(struct seq_file *m, void *v)
{
walk_pgd_level(m);
return 0;
}
static int ptdump_open(struct inode *inode, struct file *filp)
{
return single_open(filp, ptdump_show, NULL);
}
static const struct file_operations ptdump_fops = {
.open = ptdump_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static int pt_dump_init(void)
{
/*
* Figure out the maximum virtual address being accessible with the
* kernel ASCE. We need this to keep the page table walker functions
* from accessing non-existent entries.
*/
max_addr = (S390_lowcore.kernel_asce & _REGION_ENTRY_TYPE_MASK) >> 2;
max_addr = 1UL << (max_addr * 11 + 31);
address_markers[MODULES_NR].start_address = MODULES_VADDR;
s390/mm: add page table dumper This is more or less the same as the x86 page table dumper which was merged four years ago: 926e5392 "x86: add code to dump the (kernel) page tables for visual inspection by kernel developers". We add a file at /sys/kernel/debug/kernel_page_tables for debugging purposes so it's quite easy to see the kernel page table layout and possible odd mappings: ---[ Identity Mapping ]--- 0x0000000000000000-0x0000000000100000 1M PTE RW ---[ Kernel Image Start ]--- 0x0000000000100000-0x0000000000800000 7M PMD RO 0x0000000000800000-0x00000000008a9000 676K PTE RO 0x00000000008a9000-0x0000000000900000 348K PTE RW 0x0000000000900000-0x0000000001500000 12M PMD RW ---[ Kernel Image End ]--- 0x0000000001500000-0x0000000280000000 10219M PMD RW 0x0000000280000000-0x000003d280000000 3904G PUD I ---[ vmemmap Area ]--- 0x000003d280000000-0x000003d288c00000 140M PTE RW 0x000003d288c00000-0x000003d300000000 1908M PMD I 0x000003d300000000-0x000003e000000000 52G PUD I ---[ vmalloc Area ]--- 0x000003e000000000-0x000003e000009000 36K PTE RW 0x000003e000009000-0x000003e0000ee000 916K PTE I 0x000003e0000ee000-0x000003e000146000 352K PTE RW 0x000003e000146000-0x000003e000200000 744K PTE I 0x000003e000200000-0x000003e080000000 2046M PMD I 0x000003e080000000-0x0000040000000000 126G PUD I This usually makes only sense for kernel developers. The output with CONFIG_DEBUG_PAGEALLOC is not very helpful, because of the huge number of mapped out pages, however I decided for the time being to not add a !DEBUG_PAGEALLOC dependency. Maybe it's helpful for somebody even with that option. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-10-04 12:46:12 +00:00
address_markers[VMEMMAP_NR].start_address = (unsigned long) vmemmap;
address_markers[VMALLOC_NR].start_address = VMALLOC_START;
debugfs_create_file("kernel_page_tables", 0400, NULL, NULL, &ptdump_fops);
return 0;
}
device_initcall(pt_dump_init);