linux-stable/drivers/of/property.c

1450 lines
42 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* drivers/of/property.c - Procedures for accessing and interpreting
* Devicetree properties and graphs.
*
* Initially created by copying procedures from drivers/of/base.c. This
* file contains the OF property as well as the OF graph interface
* functions.
*
* Paul Mackerras August 1996.
* Copyright (C) 1996-2005 Paul Mackerras.
*
* Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner.
* {engebret|bergner}@us.ibm.com
*
* Adapted for sparc and sparc64 by David S. Miller davem@davemloft.net
*
* Reconsolidated from arch/x/kernel/prom.c by Stephen Rothwell and
* Grant Likely.
*/
#define pr_fmt(fmt) "OF: " fmt
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_graph.h>
#include <linux/string.h>
of: property: Add functional dependency link from DT bindings Add device links after the devices are created (but before they are probed) by looking at common DT bindings like clocks and interconnects. Automatically adding device links for functional dependencies at the framework level provides the following benefits: - Optimizes device probe order and avoids the useless work of attempting probes of devices that will not probe successfully (because their suppliers aren't present or haven't probed yet). For example, in a commonly available mobile SoC, registering just one consumer device's driver at an initcall level earlier than the supplier device's driver causes 11 failed probe attempts before the consumer device probes successfully. This was with a kernel with all the drivers statically compiled in. This problem gets a lot worse if all the drivers are loaded as modules without direct symbol dependencies. - Supplier devices like clock providers, interconnect providers, etc need to keep the resources they provide active and at a particular state(s) during boot up even if their current set of consumers don't request the resource to be active. This is because the rest of the consumers might not have probed yet and turning off the resource before all the consumers have probed could lead to a hang or undesired user experience. Some frameworks (Eg: regulator) handle this today by turning off "unused" resources at late_initcall_sync and hoping all the devices have probed by then. This is not a valid assumption for systems with loadable modules. Other frameworks (Eg: clock) just don't handle this due to the lack of a clear signal for when they can turn off resources. This leads to downstream hacks to handle cases like this that can easily be solved in the upstream kernel. By linking devices before they are probed, we give suppliers a clear count of the number of dependent consumers. Once all of the consumers are active, the suppliers can turn off the unused resources without making assumptions about the number of consumers. By default we just add device-links to track "driver presence" (probe succeeded) of the supplier device. If any other functionality provided by device-links are needed, it is left to the consumer/supplier devices to change the link when they probe. kbuild test robot reported clang error about missing const Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20190904211126.47518-4-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04 21:11:22 +00:00
#include <linux/moduleparam.h>
#include "of_private.h"
/**
* of_graph_is_present() - check graph's presence
* @node: pointer to device_node containing graph port
*
* Return: True if @node has a port or ports (with a port) sub-node,
* false otherwise.
*/
bool of_graph_is_present(const struct device_node *node)
{
struct device_node *ports, *port;
ports = of_get_child_by_name(node, "ports");
if (ports)
node = ports;
port = of_get_child_by_name(node, "port");
of_node_put(ports);
of_node_put(port);
return !!port;
}
EXPORT_SYMBOL(of_graph_is_present);
/**
* of_property_count_elems_of_size - Count the number of elements in a property
*
* @np: device node from which the property value is to be read.
* @propname: name of the property to be searched.
* @elem_size: size of the individual element
*
* Search for a property in a device node and count the number of elements of
* size elem_size in it. Returns number of elements on sucess, -EINVAL if the
* property does not exist or its length does not match a multiple of elem_size
* and -ENODATA if the property does not have a value.
*/
int of_property_count_elems_of_size(const struct device_node *np,
const char *propname, int elem_size)
{
struct property *prop = of_find_property(np, propname, NULL);
if (!prop)
return -EINVAL;
if (!prop->value)
return -ENODATA;
if (prop->length % elem_size != 0) {
pr_err("size of %s in node %pOF is not a multiple of %d\n",
propname, np, elem_size);
return -EINVAL;
}
return prop->length / elem_size;
}
EXPORT_SYMBOL_GPL(of_property_count_elems_of_size);
/**
* of_find_property_value_of_size
*
* @np: device node from which the property value is to be read.
* @propname: name of the property to be searched.
* @min: minimum allowed length of property value
* @max: maximum allowed length of property value (0 means unlimited)
* @len: if !=NULL, actual length is written to here
*
* Search for a property in a device node and valid the requested size.
* Returns the property value on success, -EINVAL if the property does not
* exist, -ENODATA if property does not have a value, and -EOVERFLOW if the
* property data is too small or too large.
*
*/
static void *of_find_property_value_of_size(const struct device_node *np,
const char *propname, u32 min, u32 max, size_t *len)
{
struct property *prop = of_find_property(np, propname, NULL);
if (!prop)
return ERR_PTR(-EINVAL);
if (!prop->value)
return ERR_PTR(-ENODATA);
if (prop->length < min)
return ERR_PTR(-EOVERFLOW);
if (max && prop->length > max)
return ERR_PTR(-EOVERFLOW);
if (len)
*len = prop->length;
return prop->value;
}
/**
* of_property_read_u32_index - Find and read a u32 from a multi-value property.
*
* @np: device node from which the property value is to be read.
* @propname: name of the property to be searched.
* @index: index of the u32 in the list of values
* @out_value: pointer to return value, modified only if no error.
*
* Search for a property in a device node and read nth 32-bit value from
* it. Returns 0 on success, -EINVAL if the property does not exist,
* -ENODATA if property does not have a value, and -EOVERFLOW if the
* property data isn't large enough.
*
* The out_value is modified only if a valid u32 value can be decoded.
*/
int of_property_read_u32_index(const struct device_node *np,
const char *propname,
u32 index, u32 *out_value)
{
const u32 *val = of_find_property_value_of_size(np, propname,
((index + 1) * sizeof(*out_value)),
0,
NULL);
if (IS_ERR(val))
return PTR_ERR(val);
*out_value = be32_to_cpup(((__be32 *)val) + index);
return 0;
}
EXPORT_SYMBOL_GPL(of_property_read_u32_index);
/**
* of_property_read_u64_index - Find and read a u64 from a multi-value property.
*
* @np: device node from which the property value is to be read.
* @propname: name of the property to be searched.
* @index: index of the u64 in the list of values
* @out_value: pointer to return value, modified only if no error.
*
* Search for a property in a device node and read nth 64-bit value from
* it. Returns 0 on success, -EINVAL if the property does not exist,
* -ENODATA if property does not have a value, and -EOVERFLOW if the
* property data isn't large enough.
*
* The out_value is modified only if a valid u64 value can be decoded.
*/
int of_property_read_u64_index(const struct device_node *np,
const char *propname,
u32 index, u64 *out_value)
{
const u64 *val = of_find_property_value_of_size(np, propname,
((index + 1) * sizeof(*out_value)),
0, NULL);
if (IS_ERR(val))
return PTR_ERR(val);
*out_value = be64_to_cpup(((__be64 *)val) + index);
return 0;
}
EXPORT_SYMBOL_GPL(of_property_read_u64_index);
/**
* of_property_read_variable_u8_array - Find and read an array of u8 from a
* property, with bounds on the minimum and maximum array size.
*
* @np: device node from which the property value is to be read.
* @propname: name of the property to be searched.
* @out_values: pointer to found values.
* @sz_min: minimum number of array elements to read
* @sz_max: maximum number of array elements to read, if zero there is no
* upper limit on the number of elements in the dts entry but only
* sz_min will be read.
*
* Search for a property in a device node and read 8-bit value(s) from
* it. Returns number of elements read on success, -EINVAL if the property
* does not exist, -ENODATA if property does not have a value, and -EOVERFLOW
* if the property data is smaller than sz_min or longer than sz_max.
*
* dts entry of array should be like:
* property = /bits/ 8 <0x50 0x60 0x70>;
*
* The out_values is modified only if a valid u8 value can be decoded.
*/
int of_property_read_variable_u8_array(const struct device_node *np,
const char *propname, u8 *out_values,
size_t sz_min, size_t sz_max)
{
size_t sz, count;
const u8 *val = of_find_property_value_of_size(np, propname,
(sz_min * sizeof(*out_values)),
(sz_max * sizeof(*out_values)),
&sz);
if (IS_ERR(val))
return PTR_ERR(val);
if (!sz_max)
sz = sz_min;
else
sz /= sizeof(*out_values);
count = sz;
while (count--)
*out_values++ = *val++;
return sz;
}
EXPORT_SYMBOL_GPL(of_property_read_variable_u8_array);
/**
* of_property_read_variable_u16_array - Find and read an array of u16 from a
* property, with bounds on the minimum and maximum array size.
*
* @np: device node from which the property value is to be read.
* @propname: name of the property to be searched.
* @out_values: pointer to found values.
* @sz_min: minimum number of array elements to read
* @sz_max: maximum number of array elements to read, if zero there is no
* upper limit on the number of elements in the dts entry but only
* sz_min will be read.
*
* Search for a property in a device node and read 16-bit value(s) from
* it. Returns number of elements read on success, -EINVAL if the property
* does not exist, -ENODATA if property does not have a value, and -EOVERFLOW
* if the property data is smaller than sz_min or longer than sz_max.
*
* dts entry of array should be like:
* property = /bits/ 16 <0x5000 0x6000 0x7000>;
*
* The out_values is modified only if a valid u16 value can be decoded.
*/
int of_property_read_variable_u16_array(const struct device_node *np,
const char *propname, u16 *out_values,
size_t sz_min, size_t sz_max)
{
size_t sz, count;
const __be16 *val = of_find_property_value_of_size(np, propname,
(sz_min * sizeof(*out_values)),
(sz_max * sizeof(*out_values)),
&sz);
if (IS_ERR(val))
return PTR_ERR(val);
if (!sz_max)
sz = sz_min;
else
sz /= sizeof(*out_values);
count = sz;
while (count--)
*out_values++ = be16_to_cpup(val++);
return sz;
}
EXPORT_SYMBOL_GPL(of_property_read_variable_u16_array);
/**
* of_property_read_variable_u32_array - Find and read an array of 32 bit
* integers from a property, with bounds on the minimum and maximum array size.
*
* @np: device node from which the property value is to be read.
* @propname: name of the property to be searched.
* @out_values: pointer to return found values.
* @sz_min: minimum number of array elements to read
* @sz_max: maximum number of array elements to read, if zero there is no
* upper limit on the number of elements in the dts entry but only
* sz_min will be read.
*
* Search for a property in a device node and read 32-bit value(s) from
* it. Returns number of elements read on success, -EINVAL if the property
* does not exist, -ENODATA if property does not have a value, and -EOVERFLOW
* if the property data is smaller than sz_min or longer than sz_max.
*
* The out_values is modified only if a valid u32 value can be decoded.
*/
int of_property_read_variable_u32_array(const struct device_node *np,
const char *propname, u32 *out_values,
size_t sz_min, size_t sz_max)
{
size_t sz, count;
const __be32 *val = of_find_property_value_of_size(np, propname,
(sz_min * sizeof(*out_values)),
(sz_max * sizeof(*out_values)),
&sz);
if (IS_ERR(val))
return PTR_ERR(val);
if (!sz_max)
sz = sz_min;
else
sz /= sizeof(*out_values);
count = sz;
while (count--)
*out_values++ = be32_to_cpup(val++);
return sz;
}
EXPORT_SYMBOL_GPL(of_property_read_variable_u32_array);
/**
* of_property_read_u64 - Find and read a 64 bit integer from a property
* @np: device node from which the property value is to be read.
* @propname: name of the property to be searched.
* @out_value: pointer to return value, modified only if return value is 0.
*
* Search for a property in a device node and read a 64-bit value from
* it. Returns 0 on success, -EINVAL if the property does not exist,
* -ENODATA if property does not have a value, and -EOVERFLOW if the
* property data isn't large enough.
*
* The out_value is modified only if a valid u64 value can be decoded.
*/
int of_property_read_u64(const struct device_node *np, const char *propname,
u64 *out_value)
{
const __be32 *val = of_find_property_value_of_size(np, propname,
sizeof(*out_value),
0,
NULL);
if (IS_ERR(val))
return PTR_ERR(val);
*out_value = of_read_number(val, 2);
return 0;
}
EXPORT_SYMBOL_GPL(of_property_read_u64);
/**
* of_property_read_variable_u64_array - Find and read an array of 64 bit
* integers from a property, with bounds on the minimum and maximum array size.
*
* @np: device node from which the property value is to be read.
* @propname: name of the property to be searched.
* @out_values: pointer to found values.
* @sz_min: minimum number of array elements to read
* @sz_max: maximum number of array elements to read, if zero there is no
* upper limit on the number of elements in the dts entry but only
* sz_min will be read.
*
* Search for a property in a device node and read 64-bit value(s) from
* it. Returns number of elements read on success, -EINVAL if the property
* does not exist, -ENODATA if property does not have a value, and -EOVERFLOW
* if the property data is smaller than sz_min or longer than sz_max.
*
* The out_values is modified only if a valid u64 value can be decoded.
*/
int of_property_read_variable_u64_array(const struct device_node *np,
const char *propname, u64 *out_values,
size_t sz_min, size_t sz_max)
{
size_t sz, count;
const __be32 *val = of_find_property_value_of_size(np, propname,
(sz_min * sizeof(*out_values)),
(sz_max * sizeof(*out_values)),
&sz);
if (IS_ERR(val))
return PTR_ERR(val);
if (!sz_max)
sz = sz_min;
else
sz /= sizeof(*out_values);
count = sz;
while (count--) {
*out_values++ = of_read_number(val, 2);
val += 2;
}
return sz;
}
EXPORT_SYMBOL_GPL(of_property_read_variable_u64_array);
/**
* of_property_read_string - Find and read a string from a property
* @np: device node from which the property value is to be read.
* @propname: name of the property to be searched.
* @out_string: pointer to null terminated return string, modified only if
* return value is 0.
*
* Search for a property in a device tree node and retrieve a null
* terminated string value (pointer to data, not a copy). Returns 0 on
* success, -EINVAL if the property does not exist, -ENODATA if property
* does not have a value, and -EILSEQ if the string is not null-terminated
* within the length of the property data.
*
* The out_string pointer is modified only if a valid string can be decoded.
*/
int of_property_read_string(const struct device_node *np, const char *propname,
const char **out_string)
{
const struct property *prop = of_find_property(np, propname, NULL);
if (!prop)
return -EINVAL;
if (!prop->value)
return -ENODATA;
if (strnlen(prop->value, prop->length) >= prop->length)
return -EILSEQ;
*out_string = prop->value;
return 0;
}
EXPORT_SYMBOL_GPL(of_property_read_string);
/**
* of_property_match_string() - Find string in a list and return index
* @np: pointer to node containing string list property
* @propname: string list property name
* @string: pointer to string to search for in string list
*
* This function searches a string list property and returns the index
* of a specific string value.
*/
int of_property_match_string(const struct device_node *np, const char *propname,
const char *string)
{
const struct property *prop = of_find_property(np, propname, NULL);
size_t l;
int i;
const char *p, *end;
if (!prop)
return -EINVAL;
if (!prop->value)
return -ENODATA;
p = prop->value;
end = p + prop->length;
for (i = 0; p < end; i++, p += l) {
l = strnlen(p, end - p) + 1;
if (p + l > end)
return -EILSEQ;
pr_debug("comparing %s with %s\n", string, p);
if (strcmp(string, p) == 0)
return i; /* Found it; return index */
}
return -ENODATA;
}
EXPORT_SYMBOL_GPL(of_property_match_string);
/**
* of_property_read_string_helper() - Utility helper for parsing string properties
* @np: device node from which the property value is to be read.
* @propname: name of the property to be searched.
* @out_strs: output array of string pointers.
* @sz: number of array elements to read.
* @skip: Number of strings to skip over at beginning of list.
*
* Don't call this function directly. It is a utility helper for the
* of_property_read_string*() family of functions.
*/
int of_property_read_string_helper(const struct device_node *np,
const char *propname, const char **out_strs,
size_t sz, int skip)
{
const struct property *prop = of_find_property(np, propname, NULL);
int l = 0, i = 0;
const char *p, *end;
if (!prop)
return -EINVAL;
if (!prop->value)
return -ENODATA;
p = prop->value;
end = p + prop->length;
for (i = 0; p < end && (!out_strs || i < skip + sz); i++, p += l) {
l = strnlen(p, end - p) + 1;
if (p + l > end)
return -EILSEQ;
if (out_strs && i >= skip)
*out_strs++ = p;
}
i -= skip;
return i <= 0 ? -ENODATA : i;
}
EXPORT_SYMBOL_GPL(of_property_read_string_helper);
const __be32 *of_prop_next_u32(struct property *prop, const __be32 *cur,
u32 *pu)
{
const void *curv = cur;
if (!prop)
return NULL;
if (!cur) {
curv = prop->value;
goto out_val;
}
curv += sizeof(*cur);
if (curv >= prop->value + prop->length)
return NULL;
out_val:
*pu = be32_to_cpup(curv);
return curv;
}
EXPORT_SYMBOL_GPL(of_prop_next_u32);
const char *of_prop_next_string(struct property *prop, const char *cur)
{
const void *curv = cur;
if (!prop)
return NULL;
if (!cur)
return prop->value;
curv += strlen(cur) + 1;
if (curv >= prop->value + prop->length)
return NULL;
return curv;
}
EXPORT_SYMBOL_GPL(of_prop_next_string);
/**
* of_graph_parse_endpoint() - parse common endpoint node properties
* @node: pointer to endpoint device_node
* @endpoint: pointer to the OF endpoint data structure
*
* The caller should hold a reference to @node.
*/
int of_graph_parse_endpoint(const struct device_node *node,
struct of_endpoint *endpoint)
{
struct device_node *port_node = of_get_parent(node);
WARN_ONCE(!port_node, "%s(): endpoint %pOF has no parent node\n",
__func__, node);
memset(endpoint, 0, sizeof(*endpoint));
endpoint->local_node = node;
/*
* It doesn't matter whether the two calls below succeed.
* If they don't then the default value 0 is used.
*/
of_property_read_u32(port_node, "reg", &endpoint->port);
of_property_read_u32(node, "reg", &endpoint->id);
of_node_put(port_node);
return 0;
}
EXPORT_SYMBOL(of_graph_parse_endpoint);
/**
* of_graph_get_port_by_id() - get the port matching a given id
* @parent: pointer to the parent device node
* @id: id of the port
*
* Return: A 'port' node pointer with refcount incremented. The caller
* has to use of_node_put() on it when done.
*/
struct device_node *of_graph_get_port_by_id(struct device_node *parent, u32 id)
{
struct device_node *node, *port;
node = of_get_child_by_name(parent, "ports");
if (node)
parent = node;
for_each_child_of_node(parent, port) {
u32 port_id = 0;
if (!of_node_name_eq(port, "port"))
continue;
of_property_read_u32(port, "reg", &port_id);
if (id == port_id)
break;
}
of_node_put(node);
return port;
}
EXPORT_SYMBOL(of_graph_get_port_by_id);
/**
* of_graph_get_next_endpoint() - get next endpoint node
* @parent: pointer to the parent device node
* @prev: previous endpoint node, or NULL to get first
*
* Return: An 'endpoint' node pointer with refcount incremented. Refcount
* of the passed @prev node is decremented.
*/
struct device_node *of_graph_get_next_endpoint(const struct device_node *parent,
struct device_node *prev)
{
struct device_node *endpoint;
struct device_node *port;
if (!parent)
return NULL;
/*
* Start by locating the port node. If no previous endpoint is specified
* search for the first port node, otherwise get the previous endpoint
* parent port node.
*/
if (!prev) {
struct device_node *node;
node = of_get_child_by_name(parent, "ports");
if (node)
parent = node;
port = of_get_child_by_name(parent, "port");
of_node_put(node);
if (!port) {
pr_err("graph: no port node found in %pOF\n", parent);
return NULL;
}
} else {
port = of_get_parent(prev);
if (WARN_ONCE(!port, "%s(): endpoint %pOF has no parent node\n",
__func__, prev))
return NULL;
}
while (1) {
/*
* Now that we have a port node, get the next endpoint by
* getting the next child. If the previous endpoint is NULL this
* will return the first child.
*/
endpoint = of_get_next_child(port, prev);
if (endpoint) {
of_node_put(port);
return endpoint;
}
/* No more endpoints under this port, try the next one. */
prev = NULL;
do {
port = of_get_next_child(parent, port);
if (!port)
return NULL;
} while (!of_node_name_eq(port, "port"));
}
}
EXPORT_SYMBOL(of_graph_get_next_endpoint);
/**
* of_graph_get_endpoint_by_regs() - get endpoint node of specific identifiers
* @parent: pointer to the parent device node
* @port_reg: identifier (value of reg property) of the parent port node
* @reg: identifier (value of reg property) of the endpoint node
*
* Return: An 'endpoint' node pointer which is identified by reg and at the same
* is the child of a port node identified by port_reg. reg and port_reg are
* ignored when they are -1. Use of_node_put() on the pointer when done.
*/
struct device_node *of_graph_get_endpoint_by_regs(
const struct device_node *parent, int port_reg, int reg)
{
struct of_endpoint endpoint;
struct device_node *node = NULL;
for_each_endpoint_of_node(parent, node) {
of_graph_parse_endpoint(node, &endpoint);
if (((port_reg == -1) || (endpoint.port == port_reg)) &&
((reg == -1) || (endpoint.id == reg)))
return node;
}
return NULL;
}
EXPORT_SYMBOL(of_graph_get_endpoint_by_regs);
/**
* of_graph_get_remote_endpoint() - get remote endpoint node
* @node: pointer to a local endpoint device_node
*
* Return: Remote endpoint node associated with remote endpoint node linked
* to @node. Use of_node_put() on it when done.
*/
struct device_node *of_graph_get_remote_endpoint(const struct device_node *node)
{
/* Get remote endpoint node. */
return of_parse_phandle(node, "remote-endpoint", 0);
}
EXPORT_SYMBOL(of_graph_get_remote_endpoint);
/**
* of_graph_get_port_parent() - get port's parent node
* @node: pointer to a local endpoint device_node
*
* Return: device node associated with endpoint node linked
* to @node. Use of_node_put() on it when done.
*/
struct device_node *of_graph_get_port_parent(struct device_node *node)
{
unsigned int depth;
device property: Fix usecount for of_graph_get_port_parent() Fix inconsistent use of of_graph_get_port_parent() where asoc_simple_card_parse_graph_dai() does of_node_get() before calling it while other callers do not. We can fix this by not trashing the node passed to of_graph_get_port_parent(). Let's also make sure the callers have correct refcounts and remove related incorrect of_node_put() calls for of_for_each_phandle as that's done by of_phandle_iterator_next() except when we break out of the loop early. Let's fix both issues with a single patch to avoid kobject refcounts getting messed up more if two patches are merged separately. Otherwise strange issues can happen caused by memory corruption caused by too many kobject_del() calls such as: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:747 ... (___might_sleep) (__mutex_lock) (mutex_lock_nested) (kernfs_remove) (kobject_del) (kobject_put) (of_get_next_parent) (of_graph_get_port_parent) (asoc_simple_card_parse_graph_dai [snd_soc_simple_card_utils]) (asoc_graph_card_probe [snd_soc_audio_graph_card]) Fixes: 0ef472a973eb ("of_graph: add of_graph_get_port_parent()") Fixes: 2692c1c63c29 ("ASoC: add audio-graph-card support") Fixes: 1689333f8311 ("ASoC: simple-card-utils: add asoc_simple_card_parse_graph_dai()") Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Rob Herring <robh@kernel.org> Tested-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-07-28 08:23:15 +00:00
if (!node)
return NULL;
/*
* Preserve usecount for passed in node as of_get_next_parent()
* will do of_node_put() on it.
*/
of_node_get(node);
/* Walk 3 levels up only if there is 'ports' node. */
for (depth = 3; depth && node; depth--) {
node = of_get_next_parent(node);
if (depth == 2 && !of_node_name_eq(node, "ports"))
break;
}
return node;
}
EXPORT_SYMBOL(of_graph_get_port_parent);
/**
* of_graph_get_remote_port_parent() - get remote port's parent node
* @node: pointer to a local endpoint device_node
*
* Return: Remote device node associated with remote endpoint node linked
* to @node. Use of_node_put() on it when done.
*/
struct device_node *of_graph_get_remote_port_parent(
const struct device_node *node)
{
device property: Fix usecount for of_graph_get_port_parent() Fix inconsistent use of of_graph_get_port_parent() where asoc_simple_card_parse_graph_dai() does of_node_get() before calling it while other callers do not. We can fix this by not trashing the node passed to of_graph_get_port_parent(). Let's also make sure the callers have correct refcounts and remove related incorrect of_node_put() calls for of_for_each_phandle as that's done by of_phandle_iterator_next() except when we break out of the loop early. Let's fix both issues with a single patch to avoid kobject refcounts getting messed up more if two patches are merged separately. Otherwise strange issues can happen caused by memory corruption caused by too many kobject_del() calls such as: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:747 ... (___might_sleep) (__mutex_lock) (mutex_lock_nested) (kernfs_remove) (kobject_del) (kobject_put) (of_get_next_parent) (of_graph_get_port_parent) (asoc_simple_card_parse_graph_dai [snd_soc_simple_card_utils]) (asoc_graph_card_probe [snd_soc_audio_graph_card]) Fixes: 0ef472a973eb ("of_graph: add of_graph_get_port_parent()") Fixes: 2692c1c63c29 ("ASoC: add audio-graph-card support") Fixes: 1689333f8311 ("ASoC: simple-card-utils: add asoc_simple_card_parse_graph_dai()") Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Rob Herring <robh@kernel.org> Tested-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-07-28 08:23:15 +00:00
struct device_node *np, *pp;
/* Get remote endpoint node. */
np = of_graph_get_remote_endpoint(node);
device property: Fix usecount for of_graph_get_port_parent() Fix inconsistent use of of_graph_get_port_parent() where asoc_simple_card_parse_graph_dai() does of_node_get() before calling it while other callers do not. We can fix this by not trashing the node passed to of_graph_get_port_parent(). Let's also make sure the callers have correct refcounts and remove related incorrect of_node_put() calls for of_for_each_phandle as that's done by of_phandle_iterator_next() except when we break out of the loop early. Let's fix both issues with a single patch to avoid kobject refcounts getting messed up more if two patches are merged separately. Otherwise strange issues can happen caused by memory corruption caused by too many kobject_del() calls such as: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:747 ... (___might_sleep) (__mutex_lock) (mutex_lock_nested) (kernfs_remove) (kobject_del) (kobject_put) (of_get_next_parent) (of_graph_get_port_parent) (asoc_simple_card_parse_graph_dai [snd_soc_simple_card_utils]) (asoc_graph_card_probe [snd_soc_audio_graph_card]) Fixes: 0ef472a973eb ("of_graph: add of_graph_get_port_parent()") Fixes: 2692c1c63c29 ("ASoC: add audio-graph-card support") Fixes: 1689333f8311 ("ASoC: simple-card-utils: add asoc_simple_card_parse_graph_dai()") Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Rob Herring <robh@kernel.org> Tested-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-07-28 08:23:15 +00:00
pp = of_graph_get_port_parent(np);
of_node_put(np);
return pp;
}
EXPORT_SYMBOL(of_graph_get_remote_port_parent);
/**
* of_graph_get_remote_port() - get remote port node
* @node: pointer to a local endpoint device_node
*
* Return: Remote port node associated with remote endpoint node linked
* to @node. Use of_node_put() on it when done.
*/
struct device_node *of_graph_get_remote_port(const struct device_node *node)
{
struct device_node *np;
/* Get remote endpoint node. */
np = of_graph_get_remote_endpoint(node);
if (!np)
return NULL;
return of_get_next_parent(np);
}
EXPORT_SYMBOL(of_graph_get_remote_port);
int of_graph_get_endpoint_count(const struct device_node *np)
{
struct device_node *endpoint;
int num = 0;
for_each_endpoint_of_node(np, endpoint)
num++;
return num;
}
EXPORT_SYMBOL(of_graph_get_endpoint_count);
/**
* of_graph_get_remote_node() - get remote parent device_node for given port/endpoint
* @node: pointer to parent device_node containing graph port/endpoint
* @port: identifier (value of reg property) of the parent port node
* @endpoint: identifier (value of reg property) of the endpoint node
*
* Return: Remote device node associated with remote endpoint node linked
* to @node. Use of_node_put() on it when done.
*/
struct device_node *of_graph_get_remote_node(const struct device_node *node,
u32 port, u32 endpoint)
{
struct device_node *endpoint_node, *remote;
endpoint_node = of_graph_get_endpoint_by_regs(node, port, endpoint);
if (!endpoint_node) {
pr_debug("no valid endpoint (%d, %d) for node %pOF\n",
port, endpoint, node);
return NULL;
}
remote = of_graph_get_remote_port_parent(endpoint_node);
of_node_put(endpoint_node);
if (!remote) {
pr_debug("no valid remote node\n");
return NULL;
}
if (!of_device_is_available(remote)) {
pr_debug("not available for remote node\n");
of_node_put(remote);
return NULL;
}
return remote;
}
EXPORT_SYMBOL(of_graph_get_remote_node);
static struct fwnode_handle *of_fwnode_get(struct fwnode_handle *fwnode)
{
return of_fwnode_handle(of_node_get(to_of_node(fwnode)));
}
static void of_fwnode_put(struct fwnode_handle *fwnode)
{
of_node_put(to_of_node(fwnode));
}
static bool of_fwnode_device_is_available(const struct fwnode_handle *fwnode)
{
return of_device_is_available(to_of_node(fwnode));
}
static bool of_fwnode_property_present(const struct fwnode_handle *fwnode,
const char *propname)
{
return of_property_read_bool(to_of_node(fwnode), propname);
}
static int of_fwnode_property_read_int_array(const struct fwnode_handle *fwnode,
const char *propname,
unsigned int elem_size, void *val,
size_t nval)
{
const struct device_node *node = to_of_node(fwnode);
if (!val)
return of_property_count_elems_of_size(node, propname,
elem_size);
switch (elem_size) {
case sizeof(u8):
return of_property_read_u8_array(node, propname, val, nval);
case sizeof(u16):
return of_property_read_u16_array(node, propname, val, nval);
case sizeof(u32):
return of_property_read_u32_array(node, propname, val, nval);
case sizeof(u64):
return of_property_read_u64_array(node, propname, val, nval);
}
return -ENXIO;
}
static int
of_fwnode_property_read_string_array(const struct fwnode_handle *fwnode,
const char *propname, const char **val,
size_t nval)
{
const struct device_node *node = to_of_node(fwnode);
return val ?
of_property_read_string_array(node, propname, val, nval) :
of_property_count_strings(node, propname);
}
static const char *of_fwnode_get_name(const struct fwnode_handle *fwnode)
{
return kbasename(to_of_node(fwnode)->full_name);
}
static const char *of_fwnode_get_name_prefix(const struct fwnode_handle *fwnode)
{
/* Root needs no prefix here (its name is "/"). */
if (!to_of_node(fwnode)->parent)
return "";
return "/";
}
static struct fwnode_handle *
of_fwnode_get_parent(const struct fwnode_handle *fwnode)
{
return of_fwnode_handle(of_get_parent(to_of_node(fwnode)));
}
static struct fwnode_handle *
of_fwnode_get_next_child_node(const struct fwnode_handle *fwnode,
struct fwnode_handle *child)
{
return of_fwnode_handle(of_get_next_available_child(to_of_node(fwnode),
to_of_node(child)));
}
static struct fwnode_handle *
of_fwnode_get_named_child_node(const struct fwnode_handle *fwnode,
const char *childname)
{
const struct device_node *node = to_of_node(fwnode);
struct device_node *child;
for_each_available_child_of_node(node, child)
if (of_node_name_eq(child, childname))
return of_fwnode_handle(child);
return NULL;
}
static int
of_fwnode_get_reference_args(const struct fwnode_handle *fwnode,
const char *prop, const char *nargs_prop,
unsigned int nargs, unsigned int index,
struct fwnode_reference_args *args)
{
struct of_phandle_args of_args;
unsigned int i;
int ret;
if (nargs_prop)
ret = of_parse_phandle_with_args(to_of_node(fwnode), prop,
nargs_prop, index, &of_args);
else
ret = of_parse_phandle_with_fixed_args(to_of_node(fwnode), prop,
nargs, index, &of_args);
if (ret < 0)
return ret;
if (!args)
return 0;
args->nargs = of_args.args_count;
args->fwnode = of_fwnode_handle(of_args.np);
for (i = 0; i < NR_FWNODE_REFERENCE_ARGS; i++)
args->args[i] = i < of_args.args_count ? of_args.args[i] : 0;
return 0;
}
static struct fwnode_handle *
of_fwnode_graph_get_next_endpoint(const struct fwnode_handle *fwnode,
struct fwnode_handle *prev)
{
return of_fwnode_handle(of_graph_get_next_endpoint(to_of_node(fwnode),
to_of_node(prev)));
}
static struct fwnode_handle *
of_fwnode_graph_get_remote_endpoint(const struct fwnode_handle *fwnode)
{
return of_fwnode_handle(
of_graph_get_remote_endpoint(to_of_node(fwnode)));
}
static struct fwnode_handle *
of_fwnode_graph_get_port_parent(struct fwnode_handle *fwnode)
{
struct device_node *np;
/* Get the parent of the port */
np = of_get_parent(to_of_node(fwnode));
if (!np)
return NULL;
/* Is this the "ports" node? If not, it's the port parent. */
if (!of_node_name_eq(np, "ports"))
return of_fwnode_handle(np);
return of_fwnode_handle(of_get_next_parent(np));
}
static int of_fwnode_graph_parse_endpoint(const struct fwnode_handle *fwnode,
struct fwnode_endpoint *endpoint)
{
const struct device_node *node = to_of_node(fwnode);
struct device_node *port_node = of_get_parent(node);
endpoint->local_fwnode = fwnode;
of_property_read_u32(port_node, "reg", &endpoint->port);
of_property_read_u32(node, "reg", &endpoint->id);
of_node_put(port_node);
return 0;
}
static const void *
of_fwnode_device_get_match_data(const struct fwnode_handle *fwnode,
const struct device *dev)
{
return of_device_get_match_data(dev);
}
of: property: Add functional dependency link from DT bindings Add device links after the devices are created (but before they are probed) by looking at common DT bindings like clocks and interconnects. Automatically adding device links for functional dependencies at the framework level provides the following benefits: - Optimizes device probe order and avoids the useless work of attempting probes of devices that will not probe successfully (because their suppliers aren't present or haven't probed yet). For example, in a commonly available mobile SoC, registering just one consumer device's driver at an initcall level earlier than the supplier device's driver causes 11 failed probe attempts before the consumer device probes successfully. This was with a kernel with all the drivers statically compiled in. This problem gets a lot worse if all the drivers are loaded as modules without direct symbol dependencies. - Supplier devices like clock providers, interconnect providers, etc need to keep the resources they provide active and at a particular state(s) during boot up even if their current set of consumers don't request the resource to be active. This is because the rest of the consumers might not have probed yet and turning off the resource before all the consumers have probed could lead to a hang or undesired user experience. Some frameworks (Eg: regulator) handle this today by turning off "unused" resources at late_initcall_sync and hoping all the devices have probed by then. This is not a valid assumption for systems with loadable modules. Other frameworks (Eg: clock) just don't handle this due to the lack of a clear signal for when they can turn off resources. This leads to downstream hacks to handle cases like this that can easily be solved in the upstream kernel. By linking devices before they are probed, we give suppliers a clear count of the number of dependent consumers. Once all of the consumers are active, the suppliers can turn off the unused resources without making assumptions about the number of consumers. By default we just add device-links to track "driver presence" (probe succeeded) of the supplier device. If any other functionality provided by device-links are needed, it is left to the consumer/supplier devices to change the link when they probe. kbuild test robot reported clang error about missing const Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20190904211126.47518-4-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04 21:11:22 +00:00
static bool of_is_ancestor_of(struct device_node *test_ancestor,
struct device_node *child)
{
of_node_get(child);
while (child) {
if (child == test_ancestor) {
of_node_put(child);
return true;
of: property: Add functional dependency link from DT bindings Add device links after the devices are created (but before they are probed) by looking at common DT bindings like clocks and interconnects. Automatically adding device links for functional dependencies at the framework level provides the following benefits: - Optimizes device probe order and avoids the useless work of attempting probes of devices that will not probe successfully (because their suppliers aren't present or haven't probed yet). For example, in a commonly available mobile SoC, registering just one consumer device's driver at an initcall level earlier than the supplier device's driver causes 11 failed probe attempts before the consumer device probes successfully. This was with a kernel with all the drivers statically compiled in. This problem gets a lot worse if all the drivers are loaded as modules without direct symbol dependencies. - Supplier devices like clock providers, interconnect providers, etc need to keep the resources they provide active and at a particular state(s) during boot up even if their current set of consumers don't request the resource to be active. This is because the rest of the consumers might not have probed yet and turning off the resource before all the consumers have probed could lead to a hang or undesired user experience. Some frameworks (Eg: regulator) handle this today by turning off "unused" resources at late_initcall_sync and hoping all the devices have probed by then. This is not a valid assumption for systems with loadable modules. Other frameworks (Eg: clock) just don't handle this due to the lack of a clear signal for when they can turn off resources. This leads to downstream hacks to handle cases like this that can easily be solved in the upstream kernel. By linking devices before they are probed, we give suppliers a clear count of the number of dependent consumers. Once all of the consumers are active, the suppliers can turn off the unused resources without making assumptions about the number of consumers. By default we just add device-links to track "driver presence" (probe succeeded) of the supplier device. If any other functionality provided by device-links are needed, it is left to the consumer/supplier devices to change the link when they probe. kbuild test robot reported clang error about missing const Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20190904211126.47518-4-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04 21:11:22 +00:00
}
child = of_get_next_parent(child);
}
return false;
of: property: Add functional dependency link from DT bindings Add device links after the devices are created (but before they are probed) by looking at common DT bindings like clocks and interconnects. Automatically adding device links for functional dependencies at the framework level provides the following benefits: - Optimizes device probe order and avoids the useless work of attempting probes of devices that will not probe successfully (because their suppliers aren't present or haven't probed yet). For example, in a commonly available mobile SoC, registering just one consumer device's driver at an initcall level earlier than the supplier device's driver causes 11 failed probe attempts before the consumer device probes successfully. This was with a kernel with all the drivers statically compiled in. This problem gets a lot worse if all the drivers are loaded as modules without direct symbol dependencies. - Supplier devices like clock providers, interconnect providers, etc need to keep the resources they provide active and at a particular state(s) during boot up even if their current set of consumers don't request the resource to be active. This is because the rest of the consumers might not have probed yet and turning off the resource before all the consumers have probed could lead to a hang or undesired user experience. Some frameworks (Eg: regulator) handle this today by turning off "unused" resources at late_initcall_sync and hoping all the devices have probed by then. This is not a valid assumption for systems with loadable modules. Other frameworks (Eg: clock) just don't handle this due to the lack of a clear signal for when they can turn off resources. This leads to downstream hacks to handle cases like this that can easily be solved in the upstream kernel. By linking devices before they are probed, we give suppliers a clear count of the number of dependent consumers. Once all of the consumers are active, the suppliers can turn off the unused resources without making assumptions about the number of consumers. By default we just add device-links to track "driver presence" (probe succeeded) of the supplier device. If any other functionality provided by device-links are needed, it is left to the consumer/supplier devices to change the link when they probe. kbuild test robot reported clang error about missing const Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20190904211126.47518-4-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04 21:11:22 +00:00
}
/**
* of_get_next_parent_dev - Add device link to supplier from supplier phandle
* @np: device tree node
*
* Given a device tree node (@np), this function finds its closest ancestor
* device tree node that has a corresponding struct device.
*
* The caller of this function is expected to call put_device() on the returned
* device when they are done.
*/
static struct device *of_get_next_parent_dev(struct device_node *np)
{
struct device *dev = NULL;
of_node_get(np);
do {
np = of_get_next_parent(np);
if (np)
dev = get_dev_from_fwnode(&np->fwnode);
} while (np && !dev);
of_node_put(np);
return dev;
}
of: property: Add functional dependency link from DT bindings Add device links after the devices are created (but before they are probed) by looking at common DT bindings like clocks and interconnects. Automatically adding device links for functional dependencies at the framework level provides the following benefits: - Optimizes device probe order and avoids the useless work of attempting probes of devices that will not probe successfully (because their suppliers aren't present or haven't probed yet). For example, in a commonly available mobile SoC, registering just one consumer device's driver at an initcall level earlier than the supplier device's driver causes 11 failed probe attempts before the consumer device probes successfully. This was with a kernel with all the drivers statically compiled in. This problem gets a lot worse if all the drivers are loaded as modules without direct symbol dependencies. - Supplier devices like clock providers, interconnect providers, etc need to keep the resources they provide active and at a particular state(s) during boot up even if their current set of consumers don't request the resource to be active. This is because the rest of the consumers might not have probed yet and turning off the resource before all the consumers have probed could lead to a hang or undesired user experience. Some frameworks (Eg: regulator) handle this today by turning off "unused" resources at late_initcall_sync and hoping all the devices have probed by then. This is not a valid assumption for systems with loadable modules. Other frameworks (Eg: clock) just don't handle this due to the lack of a clear signal for when they can turn off resources. This leads to downstream hacks to handle cases like this that can easily be solved in the upstream kernel. By linking devices before they are probed, we give suppliers a clear count of the number of dependent consumers. Once all of the consumers are active, the suppliers can turn off the unused resources without making assumptions about the number of consumers. By default we just add device-links to track "driver presence" (probe succeeded) of the supplier device. If any other functionality provided by device-links are needed, it is left to the consumer/supplier devices to change the link when they probe. kbuild test robot reported clang error about missing const Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20190904211126.47518-4-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04 21:11:22 +00:00
/**
* of_link_to_phandle - Add device link to supplier from supplier phandle
* @dev: consumer device
* @sup_np: phandle to supplier device tree node
*
* Given a phandle to a supplier device tree node (@sup_np), this function
* finds the device that owns the supplier device tree node and creates a
* device link from @dev consumer device to the supplier device. This function
* doesn't create device links for invalid scenarios such as trying to create a
* link with a parent device as the consumer of its child device. In such
* cases, it returns an error.
*
* Returns:
* - 0 if link successfully created to supplier
* - -EAGAIN if linking to the supplier should be reattempted
* - -EINVAL if the supplier link is invalid and should not be created
* - -ENODEV if there is no device that corresponds to the supplier phandle
*/
static int of_link_to_phandle(struct device *dev, struct device_node *sup_np,
u32 dl_flags)
of: property: Add functional dependency link from DT bindings Add device links after the devices are created (but before they are probed) by looking at common DT bindings like clocks and interconnects. Automatically adding device links for functional dependencies at the framework level provides the following benefits: - Optimizes device probe order and avoids the useless work of attempting probes of devices that will not probe successfully (because their suppliers aren't present or haven't probed yet). For example, in a commonly available mobile SoC, registering just one consumer device's driver at an initcall level earlier than the supplier device's driver causes 11 failed probe attempts before the consumer device probes successfully. This was with a kernel with all the drivers statically compiled in. This problem gets a lot worse if all the drivers are loaded as modules without direct symbol dependencies. - Supplier devices like clock providers, interconnect providers, etc need to keep the resources they provide active and at a particular state(s) during boot up even if their current set of consumers don't request the resource to be active. This is because the rest of the consumers might not have probed yet and turning off the resource before all the consumers have probed could lead to a hang or undesired user experience. Some frameworks (Eg: regulator) handle this today by turning off "unused" resources at late_initcall_sync and hoping all the devices have probed by then. This is not a valid assumption for systems with loadable modules. Other frameworks (Eg: clock) just don't handle this due to the lack of a clear signal for when they can turn off resources. This leads to downstream hacks to handle cases like this that can easily be solved in the upstream kernel. By linking devices before they are probed, we give suppliers a clear count of the number of dependent consumers. Once all of the consumers are active, the suppliers can turn off the unused resources without making assumptions about the number of consumers. By default we just add device-links to track "driver presence" (probe succeeded) of the supplier device. If any other functionality provided by device-links are needed, it is left to the consumer/supplier devices to change the link when they probe. kbuild test robot reported clang error about missing const Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20190904211126.47518-4-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04 21:11:22 +00:00
{
struct device *sup_dev, *sup_par_dev;
of: property: Add functional dependency link from DT bindings Add device links after the devices are created (but before they are probed) by looking at common DT bindings like clocks and interconnects. Automatically adding device links for functional dependencies at the framework level provides the following benefits: - Optimizes device probe order and avoids the useless work of attempting probes of devices that will not probe successfully (because their suppliers aren't present or haven't probed yet). For example, in a commonly available mobile SoC, registering just one consumer device's driver at an initcall level earlier than the supplier device's driver causes 11 failed probe attempts before the consumer device probes successfully. This was with a kernel with all the drivers statically compiled in. This problem gets a lot worse if all the drivers are loaded as modules without direct symbol dependencies. - Supplier devices like clock providers, interconnect providers, etc need to keep the resources they provide active and at a particular state(s) during boot up even if their current set of consumers don't request the resource to be active. This is because the rest of the consumers might not have probed yet and turning off the resource before all the consumers have probed could lead to a hang or undesired user experience. Some frameworks (Eg: regulator) handle this today by turning off "unused" resources at late_initcall_sync and hoping all the devices have probed by then. This is not a valid assumption for systems with loadable modules. Other frameworks (Eg: clock) just don't handle this due to the lack of a clear signal for when they can turn off resources. This leads to downstream hacks to handle cases like this that can easily be solved in the upstream kernel. By linking devices before they are probed, we give suppliers a clear count of the number of dependent consumers. Once all of the consumers are active, the suppliers can turn off the unused resources without making assumptions about the number of consumers. By default we just add device-links to track "driver presence" (probe succeeded) of the supplier device. If any other functionality provided by device-links are needed, it is left to the consumer/supplier devices to change the link when they probe. kbuild test robot reported clang error about missing const Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20190904211126.47518-4-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04 21:11:22 +00:00
int ret = 0;
struct device_node *tmp_np = sup_np;
of_node_get(sup_np);
/*
* Find the device node that contains the supplier phandle. It may be
* @sup_np or it may be an ancestor of @sup_np.
*/
while (sup_np) {
/* Don't allow linking to a disabled supplier */
if (!of_device_is_available(sup_np)) {
of_node_put(sup_np);
sup_np = NULL;
}
if (of_find_property(sup_np, "compatible", NULL))
break;
of: property: Add functional dependency link from DT bindings Add device links after the devices are created (but before they are probed) by looking at common DT bindings like clocks and interconnects. Automatically adding device links for functional dependencies at the framework level provides the following benefits: - Optimizes device probe order and avoids the useless work of attempting probes of devices that will not probe successfully (because their suppliers aren't present or haven't probed yet). For example, in a commonly available mobile SoC, registering just one consumer device's driver at an initcall level earlier than the supplier device's driver causes 11 failed probe attempts before the consumer device probes successfully. This was with a kernel with all the drivers statically compiled in. This problem gets a lot worse if all the drivers are loaded as modules without direct symbol dependencies. - Supplier devices like clock providers, interconnect providers, etc need to keep the resources they provide active and at a particular state(s) during boot up even if their current set of consumers don't request the resource to be active. This is because the rest of the consumers might not have probed yet and turning off the resource before all the consumers have probed could lead to a hang or undesired user experience. Some frameworks (Eg: regulator) handle this today by turning off "unused" resources at late_initcall_sync and hoping all the devices have probed by then. This is not a valid assumption for systems with loadable modules. Other frameworks (Eg: clock) just don't handle this due to the lack of a clear signal for when they can turn off resources. This leads to downstream hacks to handle cases like this that can easily be solved in the upstream kernel. By linking devices before they are probed, we give suppliers a clear count of the number of dependent consumers. Once all of the consumers are active, the suppliers can turn off the unused resources without making assumptions about the number of consumers. By default we just add device-links to track "driver presence" (probe succeeded) of the supplier device. If any other functionality provided by device-links are needed, it is left to the consumer/supplier devices to change the link when they probe. kbuild test robot reported clang error about missing const Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20190904211126.47518-4-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04 21:11:22 +00:00
sup_np = of_get_next_parent(sup_np);
}
of: property: Add functional dependency link from DT bindings Add device links after the devices are created (but before they are probed) by looking at common DT bindings like clocks and interconnects. Automatically adding device links for functional dependencies at the framework level provides the following benefits: - Optimizes device probe order and avoids the useless work of attempting probes of devices that will not probe successfully (because their suppliers aren't present or haven't probed yet). For example, in a commonly available mobile SoC, registering just one consumer device's driver at an initcall level earlier than the supplier device's driver causes 11 failed probe attempts before the consumer device probes successfully. This was with a kernel with all the drivers statically compiled in. This problem gets a lot worse if all the drivers are loaded as modules without direct symbol dependencies. - Supplier devices like clock providers, interconnect providers, etc need to keep the resources they provide active and at a particular state(s) during boot up even if their current set of consumers don't request the resource to be active. This is because the rest of the consumers might not have probed yet and turning off the resource before all the consumers have probed could lead to a hang or undesired user experience. Some frameworks (Eg: regulator) handle this today by turning off "unused" resources at late_initcall_sync and hoping all the devices have probed by then. This is not a valid assumption for systems with loadable modules. Other frameworks (Eg: clock) just don't handle this due to the lack of a clear signal for when they can turn off resources. This leads to downstream hacks to handle cases like this that can easily be solved in the upstream kernel. By linking devices before they are probed, we give suppliers a clear count of the number of dependent consumers. Once all of the consumers are active, the suppliers can turn off the unused resources without making assumptions about the number of consumers. By default we just add device-links to track "driver presence" (probe succeeded) of the supplier device. If any other functionality provided by device-links are needed, it is left to the consumer/supplier devices to change the link when they probe. kbuild test robot reported clang error about missing const Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20190904211126.47518-4-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04 21:11:22 +00:00
if (!sup_np) {
dev_dbg(dev, "Not linking to %pOFP - No device\n", tmp_np);
return -ENODEV;
}
/*
* Don't allow linking a device node as a consumer of one of its
* descendant nodes. By definition, a child node can't be a functional
* dependency for the parent node.
*/
if (of_is_ancestor_of(dev->of_node, sup_np)) {
of: property: Add functional dependency link from DT bindings Add device links after the devices are created (but before they are probed) by looking at common DT bindings like clocks and interconnects. Automatically adding device links for functional dependencies at the framework level provides the following benefits: - Optimizes device probe order and avoids the useless work of attempting probes of devices that will not probe successfully (because their suppliers aren't present or haven't probed yet). For example, in a commonly available mobile SoC, registering just one consumer device's driver at an initcall level earlier than the supplier device's driver causes 11 failed probe attempts before the consumer device probes successfully. This was with a kernel with all the drivers statically compiled in. This problem gets a lot worse if all the drivers are loaded as modules without direct symbol dependencies. - Supplier devices like clock providers, interconnect providers, etc need to keep the resources they provide active and at a particular state(s) during boot up even if their current set of consumers don't request the resource to be active. This is because the rest of the consumers might not have probed yet and turning off the resource before all the consumers have probed could lead to a hang or undesired user experience. Some frameworks (Eg: regulator) handle this today by turning off "unused" resources at late_initcall_sync and hoping all the devices have probed by then. This is not a valid assumption for systems with loadable modules. Other frameworks (Eg: clock) just don't handle this due to the lack of a clear signal for when they can turn off resources. This leads to downstream hacks to handle cases like this that can easily be solved in the upstream kernel. By linking devices before they are probed, we give suppliers a clear count of the number of dependent consumers. Once all of the consumers are active, the suppliers can turn off the unused resources without making assumptions about the number of consumers. By default we just add device-links to track "driver presence" (probe succeeded) of the supplier device. If any other functionality provided by device-links are needed, it is left to the consumer/supplier devices to change the link when they probe. kbuild test robot reported clang error about missing const Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20190904211126.47518-4-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04 21:11:22 +00:00
dev_dbg(dev, "Not linking to %pOFP - is descendant\n", sup_np);
of_node_put(sup_np);
return -EINVAL;
}
sup_dev = get_dev_from_fwnode(&sup_np->fwnode);
if (!sup_dev && of_node_check_flag(sup_np, OF_POPULATED)) {
/* Early device without struct device. */
dev_dbg(dev, "Not linking to %pOFP - No struct device\n",
sup_np);
of_node_put(sup_np);
return -ENODEV;
} else if (!sup_dev) {
/*
* DL_FLAG_SYNC_STATE_ONLY doesn't block probing and supports
* cycles. So cycle detection isn't necessary and shouldn't be
* done.
*/
if (dl_flags & DL_FLAG_SYNC_STATE_ONLY) {
of_node_put(sup_np);
return -EAGAIN;
}
sup_par_dev = of_get_next_parent_dev(sup_np);
if (sup_par_dev && device_is_dependent(dev, sup_par_dev)) {
/* Cyclic dependency detected, don't try to link */
dev_dbg(dev, "Not linking to %pOFP - cycle detected\n",
sup_np);
ret = -EINVAL;
} else {
/*
* Can't check for cycles or no cycles. So let's try
* again later.
*/
ret = -EAGAIN;
}
of_node_put(sup_np);
put_device(sup_par_dev);
return ret;
}
of_node_put(sup_np);
of: property: Add functional dependency link from DT bindings Add device links after the devices are created (but before they are probed) by looking at common DT bindings like clocks and interconnects. Automatically adding device links for functional dependencies at the framework level provides the following benefits: - Optimizes device probe order and avoids the useless work of attempting probes of devices that will not probe successfully (because their suppliers aren't present or haven't probed yet). For example, in a commonly available mobile SoC, registering just one consumer device's driver at an initcall level earlier than the supplier device's driver causes 11 failed probe attempts before the consumer device probes successfully. This was with a kernel with all the drivers statically compiled in. This problem gets a lot worse if all the drivers are loaded as modules without direct symbol dependencies. - Supplier devices like clock providers, interconnect providers, etc need to keep the resources they provide active and at a particular state(s) during boot up even if their current set of consumers don't request the resource to be active. This is because the rest of the consumers might not have probed yet and turning off the resource before all the consumers have probed could lead to a hang or undesired user experience. Some frameworks (Eg: regulator) handle this today by turning off "unused" resources at late_initcall_sync and hoping all the devices have probed by then. This is not a valid assumption for systems with loadable modules. Other frameworks (Eg: clock) just don't handle this due to the lack of a clear signal for when they can turn off resources. This leads to downstream hacks to handle cases like this that can easily be solved in the upstream kernel. By linking devices before they are probed, we give suppliers a clear count of the number of dependent consumers. Once all of the consumers are active, the suppliers can turn off the unused resources without making assumptions about the number of consumers. By default we just add device-links to track "driver presence" (probe succeeded) of the supplier device. If any other functionality provided by device-links are needed, it is left to the consumer/supplier devices to change the link when they probe. kbuild test robot reported clang error about missing const Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20190904211126.47518-4-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04 21:11:22 +00:00
if (!device_link_add(dev, sup_dev, dl_flags))
ret = -EINVAL;
of: property: Add functional dependency link from DT bindings Add device links after the devices are created (but before they are probed) by looking at common DT bindings like clocks and interconnects. Automatically adding device links for functional dependencies at the framework level provides the following benefits: - Optimizes device probe order and avoids the useless work of attempting probes of devices that will not probe successfully (because their suppliers aren't present or haven't probed yet). For example, in a commonly available mobile SoC, registering just one consumer device's driver at an initcall level earlier than the supplier device's driver causes 11 failed probe attempts before the consumer device probes successfully. This was with a kernel with all the drivers statically compiled in. This problem gets a lot worse if all the drivers are loaded as modules without direct symbol dependencies. - Supplier devices like clock providers, interconnect providers, etc need to keep the resources they provide active and at a particular state(s) during boot up even if their current set of consumers don't request the resource to be active. This is because the rest of the consumers might not have probed yet and turning off the resource before all the consumers have probed could lead to a hang or undesired user experience. Some frameworks (Eg: regulator) handle this today by turning off "unused" resources at late_initcall_sync and hoping all the devices have probed by then. This is not a valid assumption for systems with loadable modules. Other frameworks (Eg: clock) just don't handle this due to the lack of a clear signal for when they can turn off resources. This leads to downstream hacks to handle cases like this that can easily be solved in the upstream kernel. By linking devices before they are probed, we give suppliers a clear count of the number of dependent consumers. Once all of the consumers are active, the suppliers can turn off the unused resources without making assumptions about the number of consumers. By default we just add device-links to track "driver presence" (probe succeeded) of the supplier device. If any other functionality provided by device-links are needed, it is left to the consumer/supplier devices to change the link when they probe. kbuild test robot reported clang error about missing const Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20190904211126.47518-4-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04 21:11:22 +00:00
put_device(sup_dev);
return ret;
}
/**
* parse_prop_cells - Property parsing function for suppliers
*
* @np: Pointer to device tree node containing a list
* @prop_name: Name of property to be parsed. Expected to hold phandle values
* @index: For properties holding a list of phandles, this is the index
* into the list.
* @list_name: Property name that is known to contain list of phandle(s) to
* supplier(s)
* @cells_name: property name that specifies phandles' arguments count
*
* This is a helper function to parse properties that have a known fixed name
* and are a list of phandles and phandle arguments.
*
* Returns:
* - phandle node pointer with refcount incremented. Caller must of_node_put()
* on it when done.
* - NULL if no phandle found at index
*/
static struct device_node *parse_prop_cells(struct device_node *np,
const char *prop_name, int index,
const char *list_name,
const char *cells_name)
{
struct of_phandle_args sup_args;
if (strcmp(prop_name, list_name))
return NULL;
if (of_parse_phandle_with_args(np, list_name, cells_name, index,
&sup_args))
return NULL;
return sup_args.np;
}
#define DEFINE_SIMPLE_PROP(fname, name, cells) \
static struct device_node *parse_##fname(struct device_node *np, \
const char *prop_name, int index) \
{ \
return parse_prop_cells(np, prop_name, index, name, cells); \
of: property: Add functional dependency link from DT bindings Add device links after the devices are created (but before they are probed) by looking at common DT bindings like clocks and interconnects. Automatically adding device links for functional dependencies at the framework level provides the following benefits: - Optimizes device probe order and avoids the useless work of attempting probes of devices that will not probe successfully (because their suppliers aren't present or haven't probed yet). For example, in a commonly available mobile SoC, registering just one consumer device's driver at an initcall level earlier than the supplier device's driver causes 11 failed probe attempts before the consumer device probes successfully. This was with a kernel with all the drivers statically compiled in. This problem gets a lot worse if all the drivers are loaded as modules without direct symbol dependencies. - Supplier devices like clock providers, interconnect providers, etc need to keep the resources they provide active and at a particular state(s) during boot up even if their current set of consumers don't request the resource to be active. This is because the rest of the consumers might not have probed yet and turning off the resource before all the consumers have probed could lead to a hang or undesired user experience. Some frameworks (Eg: regulator) handle this today by turning off "unused" resources at late_initcall_sync and hoping all the devices have probed by then. This is not a valid assumption for systems with loadable modules. Other frameworks (Eg: clock) just don't handle this due to the lack of a clear signal for when they can turn off resources. This leads to downstream hacks to handle cases like this that can easily be solved in the upstream kernel. By linking devices before they are probed, we give suppliers a clear count of the number of dependent consumers. Once all of the consumers are active, the suppliers can turn off the unused resources without making assumptions about the number of consumers. By default we just add device-links to track "driver presence" (probe succeeded) of the supplier device. If any other functionality provided by device-links are needed, it is left to the consumer/supplier devices to change the link when they probe. kbuild test robot reported clang error about missing const Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20190904211126.47518-4-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04 21:11:22 +00:00
}
static int strcmp_suffix(const char *str, const char *suffix)
{
unsigned int len, suffix_len;
len = strlen(str);
suffix_len = strlen(suffix);
if (len <= suffix_len)
return -1;
return strcmp(str + len - suffix_len, suffix);
}
/**
* parse_suffix_prop_cells - Suffix property parsing function for suppliers
*
* @np: Pointer to device tree node containing a list
* @prop_name: Name of property to be parsed. Expected to hold phandle values
* @index: For properties holding a list of phandles, this is the index
* into the list.
* @suffix: Property suffix that is known to contain list of phandle(s) to
* supplier(s)
* @cells_name: property name that specifies phandles' arguments count
*
* This is a helper function to parse properties that have a known fixed suffix
* and are a list of phandles and phandle arguments.
*
* Returns:
* - phandle node pointer with refcount incremented. Caller must of_node_put()
* on it when done.
* - NULL if no phandle found at index
*/
static struct device_node *parse_suffix_prop_cells(struct device_node *np,
const char *prop_name, int index,
const char *suffix,
const char *cells_name)
of: property: Add functional dependency link from DT bindings Add device links after the devices are created (but before they are probed) by looking at common DT bindings like clocks and interconnects. Automatically adding device links for functional dependencies at the framework level provides the following benefits: - Optimizes device probe order and avoids the useless work of attempting probes of devices that will not probe successfully (because their suppliers aren't present or haven't probed yet). For example, in a commonly available mobile SoC, registering just one consumer device's driver at an initcall level earlier than the supplier device's driver causes 11 failed probe attempts before the consumer device probes successfully. This was with a kernel with all the drivers statically compiled in. This problem gets a lot worse if all the drivers are loaded as modules without direct symbol dependencies. - Supplier devices like clock providers, interconnect providers, etc need to keep the resources they provide active and at a particular state(s) during boot up even if their current set of consumers don't request the resource to be active. This is because the rest of the consumers might not have probed yet and turning off the resource before all the consumers have probed could lead to a hang or undesired user experience. Some frameworks (Eg: regulator) handle this today by turning off "unused" resources at late_initcall_sync and hoping all the devices have probed by then. This is not a valid assumption for systems with loadable modules. Other frameworks (Eg: clock) just don't handle this due to the lack of a clear signal for when they can turn off resources. This leads to downstream hacks to handle cases like this that can easily be solved in the upstream kernel. By linking devices before they are probed, we give suppliers a clear count of the number of dependent consumers. Once all of the consumers are active, the suppliers can turn off the unused resources without making assumptions about the number of consumers. By default we just add device-links to track "driver presence" (probe succeeded) of the supplier device. If any other functionality provided by device-links are needed, it is left to the consumer/supplier devices to change the link when they probe. kbuild test robot reported clang error about missing const Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20190904211126.47518-4-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04 21:11:22 +00:00
{
struct of_phandle_args sup_args;
if (strcmp_suffix(prop_name, suffix))
of: property: Add functional dependency link from DT bindings Add device links after the devices are created (but before they are probed) by looking at common DT bindings like clocks and interconnects. Automatically adding device links for functional dependencies at the framework level provides the following benefits: - Optimizes device probe order and avoids the useless work of attempting probes of devices that will not probe successfully (because their suppliers aren't present or haven't probed yet). For example, in a commonly available mobile SoC, registering just one consumer device's driver at an initcall level earlier than the supplier device's driver causes 11 failed probe attempts before the consumer device probes successfully. This was with a kernel with all the drivers statically compiled in. This problem gets a lot worse if all the drivers are loaded as modules without direct symbol dependencies. - Supplier devices like clock providers, interconnect providers, etc need to keep the resources they provide active and at a particular state(s) during boot up even if their current set of consumers don't request the resource to be active. This is because the rest of the consumers might not have probed yet and turning off the resource before all the consumers have probed could lead to a hang or undesired user experience. Some frameworks (Eg: regulator) handle this today by turning off "unused" resources at late_initcall_sync and hoping all the devices have probed by then. This is not a valid assumption for systems with loadable modules. Other frameworks (Eg: clock) just don't handle this due to the lack of a clear signal for when they can turn off resources. This leads to downstream hacks to handle cases like this that can easily be solved in the upstream kernel. By linking devices before they are probed, we give suppliers a clear count of the number of dependent consumers. Once all of the consumers are active, the suppliers can turn off the unused resources without making assumptions about the number of consumers. By default we just add device-links to track "driver presence" (probe succeeded) of the supplier device. If any other functionality provided by device-links are needed, it is left to the consumer/supplier devices to change the link when they probe. kbuild test robot reported clang error about missing const Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20190904211126.47518-4-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04 21:11:22 +00:00
return NULL;
if (of_parse_phandle_with_args(np, prop_name, cells_name, index,
&sup_args))
return NULL;
return sup_args.np;
}
#define DEFINE_SUFFIX_PROP(fname, suffix, cells) \
static struct device_node *parse_##fname(struct device_node *np, \
const char *prop_name, int index) \
{ \
return parse_suffix_prop_cells(np, prop_name, index, suffix, cells); \
of: property: Add functional dependency link from DT bindings Add device links after the devices are created (but before they are probed) by looking at common DT bindings like clocks and interconnects. Automatically adding device links for functional dependencies at the framework level provides the following benefits: - Optimizes device probe order and avoids the useless work of attempting probes of devices that will not probe successfully (because their suppliers aren't present or haven't probed yet). For example, in a commonly available mobile SoC, registering just one consumer device's driver at an initcall level earlier than the supplier device's driver causes 11 failed probe attempts before the consumer device probes successfully. This was with a kernel with all the drivers statically compiled in. This problem gets a lot worse if all the drivers are loaded as modules without direct symbol dependencies. - Supplier devices like clock providers, interconnect providers, etc need to keep the resources they provide active and at a particular state(s) during boot up even if their current set of consumers don't request the resource to be active. This is because the rest of the consumers might not have probed yet and turning off the resource before all the consumers have probed could lead to a hang or undesired user experience. Some frameworks (Eg: regulator) handle this today by turning off "unused" resources at late_initcall_sync and hoping all the devices have probed by then. This is not a valid assumption for systems with loadable modules. Other frameworks (Eg: clock) just don't handle this due to the lack of a clear signal for when they can turn off resources. This leads to downstream hacks to handle cases like this that can easily be solved in the upstream kernel. By linking devices before they are probed, we give suppliers a clear count of the number of dependent consumers. Once all of the consumers are active, the suppliers can turn off the unused resources without making assumptions about the number of consumers. By default we just add device-links to track "driver presence" (probe succeeded) of the supplier device. If any other functionality provided by device-links are needed, it is left to the consumer/supplier devices to change the link when they probe. kbuild test robot reported clang error about missing const Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20190904211126.47518-4-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04 21:11:22 +00:00
}
/**
* struct supplier_bindings - Property parsing functions for suppliers
*
* @parse_prop: function name
* parse_prop() finds the node corresponding to a supplier phandle
* @parse_prop.np: Pointer to device node holding supplier phandle property
* @parse_prop.prop_name: Name of property holding a phandle value
* @parse_prop.index: For properties holding a list of phandles, this is the
* index into the list
*
* Returns:
* parse_prop() return values are
* - phandle node pointer with refcount incremented. Caller must of_node_put()
* on it when done.
* - NULL if no phandle found at index
*/
struct supplier_bindings {
struct device_node *(*parse_prop)(struct device_node *np,
const char *prop_name, int index);
};
DEFINE_SIMPLE_PROP(clocks, "clocks", "#clock-cells")
DEFINE_SIMPLE_PROP(interconnects, "interconnects", "#interconnect-cells")
DEFINE_SIMPLE_PROP(iommus, "iommus", "#iommu-cells")
DEFINE_SIMPLE_PROP(mboxes, "mboxes", "#mbox-cells")
DEFINE_SIMPLE_PROP(io_channels, "io-channel", "#io-channel-cells")
DEFINE_SIMPLE_PROP(interrupt_parent, "interrupt-parent", NULL)
DEFINE_SIMPLE_PROP(dmas, "dmas", "#dma-cells")
DEFINE_SIMPLE_PROP(power_domains, "power-domains", "#power-domain-cells")
DEFINE_SIMPLE_PROP(hwlocks, "hwlocks", "#hwlock-cells")
DEFINE_SIMPLE_PROP(extcon, "extcon", NULL)
DEFINE_SIMPLE_PROP(interrupts_extended, "interrupts-extended",
"#interrupt-cells")
DEFINE_SIMPLE_PROP(nvmem_cells, "nvmem-cells", NULL)
DEFINE_SIMPLE_PROP(phys, "phys", "#phy-cells")
DEFINE_SIMPLE_PROP(wakeup_parent, "wakeup-parent", NULL)
DEFINE_SIMPLE_PROP(pinctrl0, "pinctrl-0", NULL)
DEFINE_SIMPLE_PROP(pinctrl1, "pinctrl-1", NULL)
DEFINE_SIMPLE_PROP(pinctrl2, "pinctrl-2", NULL)
DEFINE_SIMPLE_PROP(pinctrl3, "pinctrl-3", NULL)
DEFINE_SIMPLE_PROP(pinctrl4, "pinctrl-4", NULL)
DEFINE_SIMPLE_PROP(pinctrl5, "pinctrl-5", NULL)
DEFINE_SIMPLE_PROP(pinctrl6, "pinctrl-6", NULL)
DEFINE_SIMPLE_PROP(pinctrl7, "pinctrl-7", NULL)
DEFINE_SIMPLE_PROP(pinctrl8, "pinctrl-8", NULL)
DEFINE_SUFFIX_PROP(regulators, "-supply", NULL)
DEFINE_SUFFIX_PROP(gpio, "-gpio", "#gpio-cells")
DEFINE_SUFFIX_PROP(gpios, "-gpios", "#gpio-cells")
static struct device_node *parse_iommu_maps(struct device_node *np,
const char *prop_name, int index)
{
if (strcmp(prop_name, "iommu-map"))
return NULL;
return of_parse_phandle(np, prop_name, (index * 4) + 1);
}
static const struct supplier_bindings of_supplier_bindings[] = {
of: property: Add functional dependency link from DT bindings Add device links after the devices are created (but before they are probed) by looking at common DT bindings like clocks and interconnects. Automatically adding device links for functional dependencies at the framework level provides the following benefits: - Optimizes device probe order and avoids the useless work of attempting probes of devices that will not probe successfully (because their suppliers aren't present or haven't probed yet). For example, in a commonly available mobile SoC, registering just one consumer device's driver at an initcall level earlier than the supplier device's driver causes 11 failed probe attempts before the consumer device probes successfully. This was with a kernel with all the drivers statically compiled in. This problem gets a lot worse if all the drivers are loaded as modules without direct symbol dependencies. - Supplier devices like clock providers, interconnect providers, etc need to keep the resources they provide active and at a particular state(s) during boot up even if their current set of consumers don't request the resource to be active. This is because the rest of the consumers might not have probed yet and turning off the resource before all the consumers have probed could lead to a hang or undesired user experience. Some frameworks (Eg: regulator) handle this today by turning off "unused" resources at late_initcall_sync and hoping all the devices have probed by then. This is not a valid assumption for systems with loadable modules. Other frameworks (Eg: clock) just don't handle this due to the lack of a clear signal for when they can turn off resources. This leads to downstream hacks to handle cases like this that can easily be solved in the upstream kernel. By linking devices before they are probed, we give suppliers a clear count of the number of dependent consumers. Once all of the consumers are active, the suppliers can turn off the unused resources without making assumptions about the number of consumers. By default we just add device-links to track "driver presence" (probe succeeded) of the supplier device. If any other functionality provided by device-links are needed, it is left to the consumer/supplier devices to change the link when they probe. kbuild test robot reported clang error about missing const Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20190904211126.47518-4-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04 21:11:22 +00:00
{ .parse_prop = parse_clocks, },
{ .parse_prop = parse_interconnects, },
{ .parse_prop = parse_iommus, },
{ .parse_prop = parse_iommu_maps, },
{ .parse_prop = parse_mboxes, },
{ .parse_prop = parse_io_channels, },
{ .parse_prop = parse_interrupt_parent, },
{ .parse_prop = parse_dmas, },
{ .parse_prop = parse_power_domains, },
{ .parse_prop = parse_hwlocks, },
{ .parse_prop = parse_extcon, },
{ .parse_prop = parse_interrupts_extended, },
{ .parse_prop = parse_nvmem_cells, },
{ .parse_prop = parse_phys, },
{ .parse_prop = parse_wakeup_parent, },
{ .parse_prop = parse_pinctrl0, },
{ .parse_prop = parse_pinctrl1, },
{ .parse_prop = parse_pinctrl2, },
{ .parse_prop = parse_pinctrl3, },
{ .parse_prop = parse_pinctrl4, },
{ .parse_prop = parse_pinctrl5, },
{ .parse_prop = parse_pinctrl6, },
{ .parse_prop = parse_pinctrl7, },
{ .parse_prop = parse_pinctrl8, },
of: property: Add functional dependency link from DT bindings Add device links after the devices are created (but before they are probed) by looking at common DT bindings like clocks and interconnects. Automatically adding device links for functional dependencies at the framework level provides the following benefits: - Optimizes device probe order and avoids the useless work of attempting probes of devices that will not probe successfully (because their suppliers aren't present or haven't probed yet). For example, in a commonly available mobile SoC, registering just one consumer device's driver at an initcall level earlier than the supplier device's driver causes 11 failed probe attempts before the consumer device probes successfully. This was with a kernel with all the drivers statically compiled in. This problem gets a lot worse if all the drivers are loaded as modules without direct symbol dependencies. - Supplier devices like clock providers, interconnect providers, etc need to keep the resources they provide active and at a particular state(s) during boot up even if their current set of consumers don't request the resource to be active. This is because the rest of the consumers might not have probed yet and turning off the resource before all the consumers have probed could lead to a hang or undesired user experience. Some frameworks (Eg: regulator) handle this today by turning off "unused" resources at late_initcall_sync and hoping all the devices have probed by then. This is not a valid assumption for systems with loadable modules. Other frameworks (Eg: clock) just don't handle this due to the lack of a clear signal for when they can turn off resources. This leads to downstream hacks to handle cases like this that can easily be solved in the upstream kernel. By linking devices before they are probed, we give suppliers a clear count of the number of dependent consumers. Once all of the consumers are active, the suppliers can turn off the unused resources without making assumptions about the number of consumers. By default we just add device-links to track "driver presence" (probe succeeded) of the supplier device. If any other functionality provided by device-links are needed, it is left to the consumer/supplier devices to change the link when they probe. kbuild test robot reported clang error about missing const Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20190904211126.47518-4-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04 21:11:22 +00:00
{ .parse_prop = parse_regulators, },
{ .parse_prop = parse_gpio, },
{ .parse_prop = parse_gpios, },
{}
of: property: Add functional dependency link from DT bindings Add device links after the devices are created (but before they are probed) by looking at common DT bindings like clocks and interconnects. Automatically adding device links for functional dependencies at the framework level provides the following benefits: - Optimizes device probe order and avoids the useless work of attempting probes of devices that will not probe successfully (because their suppliers aren't present or haven't probed yet). For example, in a commonly available mobile SoC, registering just one consumer device's driver at an initcall level earlier than the supplier device's driver causes 11 failed probe attempts before the consumer device probes successfully. This was with a kernel with all the drivers statically compiled in. This problem gets a lot worse if all the drivers are loaded as modules without direct symbol dependencies. - Supplier devices like clock providers, interconnect providers, etc need to keep the resources they provide active and at a particular state(s) during boot up even if their current set of consumers don't request the resource to be active. This is because the rest of the consumers might not have probed yet and turning off the resource before all the consumers have probed could lead to a hang or undesired user experience. Some frameworks (Eg: regulator) handle this today by turning off "unused" resources at late_initcall_sync and hoping all the devices have probed by then. This is not a valid assumption for systems with loadable modules. Other frameworks (Eg: clock) just don't handle this due to the lack of a clear signal for when they can turn off resources. This leads to downstream hacks to handle cases like this that can easily be solved in the upstream kernel. By linking devices before they are probed, we give suppliers a clear count of the number of dependent consumers. Once all of the consumers are active, the suppliers can turn off the unused resources without making assumptions about the number of consumers. By default we just add device-links to track "driver presence" (probe succeeded) of the supplier device. If any other functionality provided by device-links are needed, it is left to the consumer/supplier devices to change the link when they probe. kbuild test robot reported clang error about missing const Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20190904211126.47518-4-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04 21:11:22 +00:00
};
/**
* of_link_property - Create device links to suppliers listed in a property
* @dev: Consumer device
* @con_np: The consumer device tree node which contains the property
* @prop_name: Name of property to be parsed
*
* This function checks if the property @prop_name that is present in the
* @con_np device tree node is one of the known common device tree bindings
* that list phandles to suppliers. If @prop_name isn't one, this function
* doesn't do anything.
*
* If @prop_name is one, this function attempts to create device links from the
* consumer device @dev to all the devices of the suppliers listed in
* @prop_name.
*
* Any failed attempt to create a device link will NOT result in an immediate
* return. of_link_property() must create links to all the available supplier
* devices even when attempts to create a link to one or more suppliers fail.
*/
static int of_link_property(struct device *dev, struct device_node *con_np,
const char *prop_name)
{
struct device_node *phandle;
const struct supplier_bindings *s = of_supplier_bindings;
of: property: Add functional dependency link from DT bindings Add device links after the devices are created (but before they are probed) by looking at common DT bindings like clocks and interconnects. Automatically adding device links for functional dependencies at the framework level provides the following benefits: - Optimizes device probe order and avoids the useless work of attempting probes of devices that will not probe successfully (because their suppliers aren't present or haven't probed yet). For example, in a commonly available mobile SoC, registering just one consumer device's driver at an initcall level earlier than the supplier device's driver causes 11 failed probe attempts before the consumer device probes successfully. This was with a kernel with all the drivers statically compiled in. This problem gets a lot worse if all the drivers are loaded as modules without direct symbol dependencies. - Supplier devices like clock providers, interconnect providers, etc need to keep the resources they provide active and at a particular state(s) during boot up even if their current set of consumers don't request the resource to be active. This is because the rest of the consumers might not have probed yet and turning off the resource before all the consumers have probed could lead to a hang or undesired user experience. Some frameworks (Eg: regulator) handle this today by turning off "unused" resources at late_initcall_sync and hoping all the devices have probed by then. This is not a valid assumption for systems with loadable modules. Other frameworks (Eg: clock) just don't handle this due to the lack of a clear signal for when they can turn off resources. This leads to downstream hacks to handle cases like this that can easily be solved in the upstream kernel. By linking devices before they are probed, we give suppliers a clear count of the number of dependent consumers. Once all of the consumers are active, the suppliers can turn off the unused resources without making assumptions about the number of consumers. By default we just add device-links to track "driver presence" (probe succeeded) of the supplier device. If any other functionality provided by device-links are needed, it is left to the consumer/supplier devices to change the link when they probe. kbuild test robot reported clang error about missing const Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20190904211126.47518-4-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04 21:11:22 +00:00
unsigned int i = 0;
bool matched = false;
int ret = 0;
u32 dl_flags;
if (dev->of_node == con_np)
dl_flags = fw_devlink_get_flags();
else
dl_flags = DL_FLAG_SYNC_STATE_ONLY;
of: property: Add functional dependency link from DT bindings Add device links after the devices are created (but before they are probed) by looking at common DT bindings like clocks and interconnects. Automatically adding device links for functional dependencies at the framework level provides the following benefits: - Optimizes device probe order and avoids the useless work of attempting probes of devices that will not probe successfully (because their suppliers aren't present or haven't probed yet). For example, in a commonly available mobile SoC, registering just one consumer device's driver at an initcall level earlier than the supplier device's driver causes 11 failed probe attempts before the consumer device probes successfully. This was with a kernel with all the drivers statically compiled in. This problem gets a lot worse if all the drivers are loaded as modules without direct symbol dependencies. - Supplier devices like clock providers, interconnect providers, etc need to keep the resources they provide active and at a particular state(s) during boot up even if their current set of consumers don't request the resource to be active. This is because the rest of the consumers might not have probed yet and turning off the resource before all the consumers have probed could lead to a hang or undesired user experience. Some frameworks (Eg: regulator) handle this today by turning off "unused" resources at late_initcall_sync and hoping all the devices have probed by then. This is not a valid assumption for systems with loadable modules. Other frameworks (Eg: clock) just don't handle this due to the lack of a clear signal for when they can turn off resources. This leads to downstream hacks to handle cases like this that can easily be solved in the upstream kernel. By linking devices before they are probed, we give suppliers a clear count of the number of dependent consumers. Once all of the consumers are active, the suppliers can turn off the unused resources without making assumptions about the number of consumers. By default we just add device-links to track "driver presence" (probe succeeded) of the supplier device. If any other functionality provided by device-links are needed, it is left to the consumer/supplier devices to change the link when they probe. kbuild test robot reported clang error about missing const Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20190904211126.47518-4-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04 21:11:22 +00:00
/* Do not stop at first failed link, link all available suppliers. */
while (!matched && s->parse_prop) {
while ((phandle = s->parse_prop(con_np, prop_name, i))) {
matched = true;
i++;
if (of_link_to_phandle(dev, phandle, dl_flags)
== -EAGAIN)
of: property: Add functional dependency link from DT bindings Add device links after the devices are created (but before they are probed) by looking at common DT bindings like clocks and interconnects. Automatically adding device links for functional dependencies at the framework level provides the following benefits: - Optimizes device probe order and avoids the useless work of attempting probes of devices that will not probe successfully (because their suppliers aren't present or haven't probed yet). For example, in a commonly available mobile SoC, registering just one consumer device's driver at an initcall level earlier than the supplier device's driver causes 11 failed probe attempts before the consumer device probes successfully. This was with a kernel with all the drivers statically compiled in. This problem gets a lot worse if all the drivers are loaded as modules without direct symbol dependencies. - Supplier devices like clock providers, interconnect providers, etc need to keep the resources they provide active and at a particular state(s) during boot up even if their current set of consumers don't request the resource to be active. This is because the rest of the consumers might not have probed yet and turning off the resource before all the consumers have probed could lead to a hang or undesired user experience. Some frameworks (Eg: regulator) handle this today by turning off "unused" resources at late_initcall_sync and hoping all the devices have probed by then. This is not a valid assumption for systems with loadable modules. Other frameworks (Eg: clock) just don't handle this due to the lack of a clear signal for when they can turn off resources. This leads to downstream hacks to handle cases like this that can easily be solved in the upstream kernel. By linking devices before they are probed, we give suppliers a clear count of the number of dependent consumers. Once all of the consumers are active, the suppliers can turn off the unused resources without making assumptions about the number of consumers. By default we just add device-links to track "driver presence" (probe succeeded) of the supplier device. If any other functionality provided by device-links are needed, it is left to the consumer/supplier devices to change the link when they probe. kbuild test robot reported clang error about missing const Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20190904211126.47518-4-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04 21:11:22 +00:00
ret = -EAGAIN;
of_node_put(phandle);
}
s++;
}
return ret;
}
static int of_link_to_suppliers(struct device *dev,
of: property: Add functional dependency link from DT bindings Add device links after the devices are created (but before they are probed) by looking at common DT bindings like clocks and interconnects. Automatically adding device links for functional dependencies at the framework level provides the following benefits: - Optimizes device probe order and avoids the useless work of attempting probes of devices that will not probe successfully (because their suppliers aren't present or haven't probed yet). For example, in a commonly available mobile SoC, registering just one consumer device's driver at an initcall level earlier than the supplier device's driver causes 11 failed probe attempts before the consumer device probes successfully. This was with a kernel with all the drivers statically compiled in. This problem gets a lot worse if all the drivers are loaded as modules without direct symbol dependencies. - Supplier devices like clock providers, interconnect providers, etc need to keep the resources they provide active and at a particular state(s) during boot up even if their current set of consumers don't request the resource to be active. This is because the rest of the consumers might not have probed yet and turning off the resource before all the consumers have probed could lead to a hang or undesired user experience. Some frameworks (Eg: regulator) handle this today by turning off "unused" resources at late_initcall_sync and hoping all the devices have probed by then. This is not a valid assumption for systems with loadable modules. Other frameworks (Eg: clock) just don't handle this due to the lack of a clear signal for when they can turn off resources. This leads to downstream hacks to handle cases like this that can easily be solved in the upstream kernel. By linking devices before they are probed, we give suppliers a clear count of the number of dependent consumers. Once all of the consumers are active, the suppliers can turn off the unused resources without making assumptions about the number of consumers. By default we just add device-links to track "driver presence" (probe succeeded) of the supplier device. If any other functionality provided by device-links are needed, it is left to the consumer/supplier devices to change the link when they probe. kbuild test robot reported clang error about missing const Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20190904211126.47518-4-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04 21:11:22 +00:00
struct device_node *con_np)
{
struct device_node *child;
struct property *p;
int ret = 0;
for_each_property_of_node(con_np, p)
if (of_link_property(dev, con_np, p->name))
ret = -ENODEV;
of: property: Add functional dependency link from DT bindings Add device links after the devices are created (but before they are probed) by looking at common DT bindings like clocks and interconnects. Automatically adding device links for functional dependencies at the framework level provides the following benefits: - Optimizes device probe order and avoids the useless work of attempting probes of devices that will not probe successfully (because their suppliers aren't present or haven't probed yet). For example, in a commonly available mobile SoC, registering just one consumer device's driver at an initcall level earlier than the supplier device's driver causes 11 failed probe attempts before the consumer device probes successfully. This was with a kernel with all the drivers statically compiled in. This problem gets a lot worse if all the drivers are loaded as modules without direct symbol dependencies. - Supplier devices like clock providers, interconnect providers, etc need to keep the resources they provide active and at a particular state(s) during boot up even if their current set of consumers don't request the resource to be active. This is because the rest of the consumers might not have probed yet and turning off the resource before all the consumers have probed could lead to a hang or undesired user experience. Some frameworks (Eg: regulator) handle this today by turning off "unused" resources at late_initcall_sync and hoping all the devices have probed by then. This is not a valid assumption for systems with loadable modules. Other frameworks (Eg: clock) just don't handle this due to the lack of a clear signal for when they can turn off resources. This leads to downstream hacks to handle cases like this that can easily be solved in the upstream kernel. By linking devices before they are probed, we give suppliers a clear count of the number of dependent consumers. Once all of the consumers are active, the suppliers can turn off the unused resources without making assumptions about the number of consumers. By default we just add device-links to track "driver presence" (probe succeeded) of the supplier device. If any other functionality provided by device-links are needed, it is left to the consumer/supplier devices to change the link when they probe. kbuild test robot reported clang error about missing const Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20190904211126.47518-4-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04 21:11:22 +00:00
for_each_available_child_of_node(con_np, child)
if (of_link_to_suppliers(dev, child) && !ret)
of: property: Create device links for all child-supplier depencencies A parent device can have child devices that it adds when it probes. But this probing of the parent device can happen way after kernel init is done -- for example, when the parent device's driver is loaded as a module. In such cases, if the child devices depend on a supplier in the system, we need to make sure the supplier gets the sync_state() callback only after these child devices are added and probed. To achieve this, when creating device links for a device by looking at its DT node, don't just look at DT references at the top node level. Look at DT references in all the descendant nodes too and create device links from the ancestor device to all these supplier devices. This way, when the parent device probes and adds child devices, the child devices can then create their own device links to the suppliers and further delay the supplier's sync_state() callback to after the child devices are probed. Example: In this illustration, -> denotes DT references and indentation represents child status. Device node A Device node B -> D Device node C -> B, D Device node D Assume all these devices have their drivers loaded as modules. Without this patch, this is the sequence of events: 1. D is added. 2. A is added. 3. Device D probes. 4. Device D gets its sync_state() callback. 5. Device B and C might malfunction because their resources got altered/turned off before they can make active requests for them. With this patch, this is the sequence of events: 1. D is added. 2. A is added and creates device links to D. 3. Device link from A to B is not added because A is a parent of B. 4. Device D probes. 5. Device D does not get it's sync_state() callback because consumer A hasn't probed yet. 5. Device A probes. 5. a. Devices B and C are added. 5. b. Device links from B and C to D are added. 5. c. Device A's probe completes. 6. Device D does not get it's sync_state() callback because consumer A has probed but consumers B and C haven't probed yet. 7. Device B and C probe. 8. Device D gets it's sync_state() callback because all its consumers have probed. 9. None of the devices malfunction. Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20190904211126.47518-7-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04 21:11:25 +00:00
ret = -EAGAIN;
of: property: Add functional dependency link from DT bindings Add device links after the devices are created (but before they are probed) by looking at common DT bindings like clocks and interconnects. Automatically adding device links for functional dependencies at the framework level provides the following benefits: - Optimizes device probe order and avoids the useless work of attempting probes of devices that will not probe successfully (because their suppliers aren't present or haven't probed yet). For example, in a commonly available mobile SoC, registering just one consumer device's driver at an initcall level earlier than the supplier device's driver causes 11 failed probe attempts before the consumer device probes successfully. This was with a kernel with all the drivers statically compiled in. This problem gets a lot worse if all the drivers are loaded as modules without direct symbol dependencies. - Supplier devices like clock providers, interconnect providers, etc need to keep the resources they provide active and at a particular state(s) during boot up even if their current set of consumers don't request the resource to be active. This is because the rest of the consumers might not have probed yet and turning off the resource before all the consumers have probed could lead to a hang or undesired user experience. Some frameworks (Eg: regulator) handle this today by turning off "unused" resources at late_initcall_sync and hoping all the devices have probed by then. This is not a valid assumption for systems with loadable modules. Other frameworks (Eg: clock) just don't handle this due to the lack of a clear signal for when they can turn off resources. This leads to downstream hacks to handle cases like this that can easily be solved in the upstream kernel. By linking devices before they are probed, we give suppliers a clear count of the number of dependent consumers. Once all of the consumers are active, the suppliers can turn off the unused resources without making assumptions about the number of consumers. By default we just add device-links to track "driver presence" (probe succeeded) of the supplier device. If any other functionality provided by device-links are needed, it is left to the consumer/supplier devices to change the link when they probe. kbuild test robot reported clang error about missing const Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20190904211126.47518-4-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04 21:11:22 +00:00
return ret;
}
static int of_fwnode_add_links(const struct fwnode_handle *fwnode,
struct device *dev)
{
if (unlikely(!is_of_node(fwnode)))
return 0;
return of_link_to_suppliers(dev, to_of_node(fwnode));
of: property: Add functional dependency link from DT bindings Add device links after the devices are created (but before they are probed) by looking at common DT bindings like clocks and interconnects. Automatically adding device links for functional dependencies at the framework level provides the following benefits: - Optimizes device probe order and avoids the useless work of attempting probes of devices that will not probe successfully (because their suppliers aren't present or haven't probed yet). For example, in a commonly available mobile SoC, registering just one consumer device's driver at an initcall level earlier than the supplier device's driver causes 11 failed probe attempts before the consumer device probes successfully. This was with a kernel with all the drivers statically compiled in. This problem gets a lot worse if all the drivers are loaded as modules without direct symbol dependencies. - Supplier devices like clock providers, interconnect providers, etc need to keep the resources they provide active and at a particular state(s) during boot up even if their current set of consumers don't request the resource to be active. This is because the rest of the consumers might not have probed yet and turning off the resource before all the consumers have probed could lead to a hang or undesired user experience. Some frameworks (Eg: regulator) handle this today by turning off "unused" resources at late_initcall_sync and hoping all the devices have probed by then. This is not a valid assumption for systems with loadable modules. Other frameworks (Eg: clock) just don't handle this due to the lack of a clear signal for when they can turn off resources. This leads to downstream hacks to handle cases like this that can easily be solved in the upstream kernel. By linking devices before they are probed, we give suppliers a clear count of the number of dependent consumers. Once all of the consumers are active, the suppliers can turn off the unused resources without making assumptions about the number of consumers. By default we just add device-links to track "driver presence" (probe succeeded) of the supplier device. If any other functionality provided by device-links are needed, it is left to the consumer/supplier devices to change the link when they probe. kbuild test robot reported clang error about missing const Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20190904211126.47518-4-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04 21:11:22 +00:00
}
const struct fwnode_operations of_fwnode_ops = {
.get = of_fwnode_get,
.put = of_fwnode_put,
.device_is_available = of_fwnode_device_is_available,
.device_get_match_data = of_fwnode_device_get_match_data,
.property_present = of_fwnode_property_present,
.property_read_int_array = of_fwnode_property_read_int_array,
.property_read_string_array = of_fwnode_property_read_string_array,
.get_name = of_fwnode_get_name,
.get_name_prefix = of_fwnode_get_name_prefix,
.get_parent = of_fwnode_get_parent,
.get_next_child_node = of_fwnode_get_next_child_node,
.get_named_child_node = of_fwnode_get_named_child_node,
.get_reference_args = of_fwnode_get_reference_args,
.graph_get_next_endpoint = of_fwnode_graph_get_next_endpoint,
.graph_get_remote_endpoint = of_fwnode_graph_get_remote_endpoint,
.graph_get_port_parent = of_fwnode_graph_get_port_parent,
.graph_parse_endpoint = of_fwnode_graph_parse_endpoint,
of: property: Add functional dependency link from DT bindings Add device links after the devices are created (but before they are probed) by looking at common DT bindings like clocks and interconnects. Automatically adding device links for functional dependencies at the framework level provides the following benefits: - Optimizes device probe order and avoids the useless work of attempting probes of devices that will not probe successfully (because their suppliers aren't present or haven't probed yet). For example, in a commonly available mobile SoC, registering just one consumer device's driver at an initcall level earlier than the supplier device's driver causes 11 failed probe attempts before the consumer device probes successfully. This was with a kernel with all the drivers statically compiled in. This problem gets a lot worse if all the drivers are loaded as modules without direct symbol dependencies. - Supplier devices like clock providers, interconnect providers, etc need to keep the resources they provide active and at a particular state(s) during boot up even if their current set of consumers don't request the resource to be active. This is because the rest of the consumers might not have probed yet and turning off the resource before all the consumers have probed could lead to a hang or undesired user experience. Some frameworks (Eg: regulator) handle this today by turning off "unused" resources at late_initcall_sync and hoping all the devices have probed by then. This is not a valid assumption for systems with loadable modules. Other frameworks (Eg: clock) just don't handle this due to the lack of a clear signal for when they can turn off resources. This leads to downstream hacks to handle cases like this that can easily be solved in the upstream kernel. By linking devices before they are probed, we give suppliers a clear count of the number of dependent consumers. Once all of the consumers are active, the suppliers can turn off the unused resources without making assumptions about the number of consumers. By default we just add device-links to track "driver presence" (probe succeeded) of the supplier device. If any other functionality provided by device-links are needed, it is left to the consumer/supplier devices to change the link when they probe. kbuild test robot reported clang error about missing const Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20190904211126.47518-4-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04 21:11:22 +00:00
.add_links = of_fwnode_add_links,
};
EXPORT_SYMBOL_GPL(of_fwnode_ops);