linux-stable/sound/soc/sof/core.c

519 lines
14 KiB
C
Raw Normal View History

// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
//
// This file is provided under a dual BSD/GPLv2 license. When using or
// redistributing this file, you may do so under either license.
//
// Copyright(c) 2018 Intel Corporation. All rights reserved.
//
// Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
//
#include <linux/firmware.h>
#include <linux/module.h>
#include <sound/soc.h>
#include <sound/sof.h>
#include "sof-priv.h"
#include "ops.h"
#define CREATE_TRACE_POINTS
#include <trace/events/sof.h>
/* see SOF_DBG_ flags */
static int sof_core_debug = IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_ENABLE_FIRMWARE_TRACE);
module_param_named(sof_debug, sof_core_debug, int, 0444);
MODULE_PARM_DESC(sof_debug, "SOF core debug options (0x0 all off)");
/* SOF defaults if not provided by the platform in ms */
#define TIMEOUT_DEFAULT_IPC_MS 500
#define TIMEOUT_DEFAULT_BOOT_MS 2000
/**
* sof_debug_check_flag - check if a given flag(s) is set in sof_core_debug
* @mask: Flag or combination of flags to check
*
* Returns true if all bits set in mask is also set in sof_core_debug, otherwise
* false
*/
bool sof_debug_check_flag(int mask)
{
if ((sof_core_debug & mask) == mask)
return true;
return false;
}
EXPORT_SYMBOL(sof_debug_check_flag);
/*
* FW Panic/fault handling.
*/
struct sof_panic_msg {
u32 id;
const char *msg;
};
/* standard FW panic types */
static const struct sof_panic_msg panic_msg[] = {
{SOF_IPC_PANIC_MEM, "out of memory"},
{SOF_IPC_PANIC_WORK, "work subsystem init failed"},
{SOF_IPC_PANIC_IPC, "IPC subsystem init failed"},
{SOF_IPC_PANIC_ARCH, "arch init failed"},
{SOF_IPC_PANIC_PLATFORM, "platform init failed"},
{SOF_IPC_PANIC_TASK, "scheduler init failed"},
{SOF_IPC_PANIC_EXCEPTION, "runtime exception"},
{SOF_IPC_PANIC_DEADLOCK, "deadlock"},
{SOF_IPC_PANIC_STACK, "stack overflow"},
{SOF_IPC_PANIC_IDLE, "can't enter idle"},
{SOF_IPC_PANIC_WFI, "invalid wait state"},
{SOF_IPC_PANIC_ASSERT, "assertion failed"},
};
/**
* sof_print_oops_and_stack - Handle the printing of DSP oops and stack trace
* @sdev: Pointer to the device's sdev
* @level: prink log level to use for the printing
* @panic_code: the panic code
* @tracep_code: tracepoint code
* @oops: Pointer to DSP specific oops data
* @panic_info: Pointer to the received panic information message
* @stack: Pointer to the call stack data
* @stack_words: Number of words in the stack data
*
* helper to be called from .dbg_dump callbacks. No error code is
* provided, it's left as an exercise for the caller of .dbg_dump
* (typically IPC or loader)
*/
void sof_print_oops_and_stack(struct snd_sof_dev *sdev, const char *level,
u32 panic_code, u32 tracep_code, void *oops,
struct sof_ipc_panic_info *panic_info,
void *stack, size_t stack_words)
{
u32 code;
int i;
/* is firmware dead ? */
if ((panic_code & SOF_IPC_PANIC_MAGIC_MASK) != SOF_IPC_PANIC_MAGIC) {
dev_printk(level, sdev->dev, "unexpected fault %#010x trace %#010x\n",
panic_code, tracep_code);
return; /* no fault ? */
}
code = panic_code & (SOF_IPC_PANIC_MAGIC_MASK | SOF_IPC_PANIC_CODE_MASK);
for (i = 0; i < ARRAY_SIZE(panic_msg); i++) {
if (panic_msg[i].id == code) {
dev_printk(level, sdev->dev, "reason: %s (%#x)\n",
panic_msg[i].msg, code & SOF_IPC_PANIC_CODE_MASK);
dev_printk(level, sdev->dev, "trace point: %#010x\n", tracep_code);
goto out;
}
}
/* unknown error */
dev_printk(level, sdev->dev, "unknown panic code: %#x\n",
code & SOF_IPC_PANIC_CODE_MASK);
dev_printk(level, sdev->dev, "trace point: %#010x\n", tracep_code);
out:
dev_printk(level, sdev->dev, "panic at %s:%d\n", panic_info->filename,
panic_info->linenum);
sof_oops(sdev, level, oops);
sof_stack(sdev, level, oops, stack, stack_words);
}
EXPORT_SYMBOL(sof_print_oops_and_stack);
ASoC: SOF: Introduce IPC SOF client support A client in the SOF (Sound Open Firmware) context is a driver that needs to communicate with the DSP via IPC messages. The SOF core is responsible for serializing the IPC messages to the DSP from the different clients. One example of an SOF client would be an IPC test client that floods the DSP with test IPC messages to validate if the serialization works as expected. Multi-client support will also add the ability to split the existing audio cards into multiple ones, so as to e.g. to deal with HDMI with a dedicated client instead of adding HDMI to all cards. This patch introduces descriptors for SOF client driver and SOF client device along with APIs for registering and unregistering a SOF client driver, sending IPCs from a client device and accessing the SOF core debugfs root entry. Along with this, add a couple of new members to struct snd_sof_dev that will be used for maintaining the list of clients. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Co-developed-by: Fred Oh <fred.oh@linux.intel.com> Signed-off-by: Fred Oh <fred.oh@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20220210150525.30756-6-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-10 15:05:21 +00:00
/* Helper to manage DSP state */
void sof_set_fw_state(struct snd_sof_dev *sdev, enum sof_fw_state new_state)
{
if (sdev->fw_state == new_state)
return;
dev_dbg(sdev->dev, "fw_state change: %d -> %d\n", sdev->fw_state, new_state);
sdev->fw_state = new_state;
switch (new_state) {
case SOF_FW_BOOT_NOT_STARTED:
case SOF_FW_BOOT_COMPLETE:
case SOF_FW_CRASHED:
sof_client_fw_state_dispatcher(sdev);
fallthrough;
default:
break;
}
}
EXPORT_SYMBOL(sof_set_fw_state);
/*
* FW Boot State Transition Diagram
*
* +----------------------------------------------------------------------+
* | |
* ------------------ ------------------ |
* | | | | |
* | BOOT_FAILED |<-------| READY_FAILED | |
* | |<--+ | | ------------------ |
* ------------------ | ------------------ | | |
* ^ | ^ | CRASHED |---+ |
* | | | | | | |
* (FW Boot Timeout) | (FW_READY FAIL) ------------------ | |
* | | | ^ | |
* | | | |(DSP Panic) | |
* ------------------ | | ------------------ | |
* | | | | | | | |
* | IN_PROGRESS |---------------+------------->| COMPLETE | | |
* | | (FW Boot OK) (FW_READY OK) | | | |
* ------------------ | ------------------ | |
* ^ | | | |
* | | | | |
* (FW Loading OK) | (System Suspend/Runtime Suspend)
* | | | | |
* | (FW Loading Fail) | | |
* ------------------ | ------------------ | | |
* | | | | |<-----+ | |
* | PREPARE |---+ | NOT_STARTED |<---------------------+ |
* | | | |<--------------------------+
* ------------------ ------------------
* | ^ | ^
* | | | |
* | +-----------------------+ |
* | (DSP Probe OK) |
* | |
* | |
* +------------------------------------+
* (System Suspend/Runtime Suspend)
*/
static int sof_probe_continue(struct snd_sof_dev *sdev)
{
struct snd_sof_pdata *plat_data = sdev->pdata;
int ret;
/* probe the DSP hardware */
ret = snd_sof_probe(sdev);
if (ret < 0) {
dev_err(sdev->dev, "error: failed to probe DSP %d\n", ret);
goto probe_err;
}
sof_set_fw_state(sdev, SOF_FW_BOOT_PREPARE);
/* check machine info */
ret = sof_machine_check(sdev);
if (ret < 0) {
dev_err(sdev->dev, "error: failed to get machine info %d\n",
ret);
goto dsp_err;
}
/* set up platform component driver */
snd_sof_new_platform_drv(sdev);
if (sdev->dspless_mode_selected) {
sof_set_fw_state(sdev, SOF_DSPLESS_MODE);
goto skip_dsp_init;
}
/* register any debug/trace capabilities */
ret = snd_sof_dbg_init(sdev);
if (ret < 0) {
/*
* debugfs issues are suppressed in snd_sof_dbg_init() since
* we cannot rely on debugfs
* here we trap errors due to memory allocation only.
*/
dev_err(sdev->dev, "error: failed to init DSP trace/debug %d\n",
ret);
goto dbg_err;
}
/* init the IPC */
sdev->ipc = snd_sof_ipc_init(sdev);
if (!sdev->ipc) {
ret = -ENOMEM;
dev_err(sdev->dev, "error: failed to init DSP IPC %d\n", ret);
goto ipc_err;
}
/* load the firmware */
ret = snd_sof_load_firmware(sdev);
if (ret < 0) {
dev_err(sdev->dev, "error: failed to load DSP firmware %d\n",
ret);
sof_set_fw_state(sdev, SOF_FW_BOOT_FAILED);
goto fw_load_err;
}
sof_set_fw_state(sdev, SOF_FW_BOOT_IN_PROGRESS);
/*
* Boot the firmware. The FW boot status will be modified
* in snd_sof_run_firmware() depending on the outcome.
*/
ret = snd_sof_run_firmware(sdev);
if (ret < 0) {
dev_err(sdev->dev, "error: failed to boot DSP firmware %d\n",
ret);
sof_set_fw_state(sdev, SOF_FW_BOOT_FAILED);
goto fw_run_err;
}
if (sof_debug_check_flag(SOF_DBG_ENABLE_TRACE)) {
sdev->fw_trace_is_supported = true;
/* init firmware tracing */
ret = sof_fw_trace_init(sdev);
if (ret < 0) {
/* non fatal */
dev_warn(sdev->dev, "failed to initialize firmware tracing %d\n",
ret);
}
} else {
dev_dbg(sdev->dev, "SOF firmware trace disabled\n");
}
skip_dsp_init:
/* hereafter all FW boot flows are for PM reasons */
sdev->first_boot = false;
/* now register audio DSP platform driver and dai */
ret = devm_snd_soc_register_component(sdev->dev, &sdev->plat_drv,
sof_ops(sdev)->drv,
sof_ops(sdev)->num_drv);
if (ret < 0) {
dev_err(sdev->dev,
"error: failed to register DSP DAI driver %d\n", ret);
goto fw_trace_err;
}
ret = snd_sof_machine_register(sdev, plat_data);
if (ret < 0) {
dev_err(sdev->dev,
"error: failed to register machine driver %d\n", ret);
goto fw_trace_err;
}
ASoC: SOF: Introduce IPC SOF client support A client in the SOF (Sound Open Firmware) context is a driver that needs to communicate with the DSP via IPC messages. The SOF core is responsible for serializing the IPC messages to the DSP from the different clients. One example of an SOF client would be an IPC test client that floods the DSP with test IPC messages to validate if the serialization works as expected. Multi-client support will also add the ability to split the existing audio cards into multiple ones, so as to e.g. to deal with HDMI with a dedicated client instead of adding HDMI to all cards. This patch introduces descriptors for SOF client driver and SOF client device along with APIs for registering and unregistering a SOF client driver, sending IPCs from a client device and accessing the SOF core debugfs root entry. Along with this, add a couple of new members to struct snd_sof_dev that will be used for maintaining the list of clients. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Co-developed-by: Fred Oh <fred.oh@linux.intel.com> Signed-off-by: Fred Oh <fred.oh@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20220210150525.30756-6-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-10 15:05:21 +00:00
ret = sof_register_clients(sdev);
if (ret < 0) {
dev_err(sdev->dev, "failed to register clients %d\n", ret);
goto sof_machine_err;
}
/*
* Some platforms in SOF, ex: BYT, may not have their platform PM
* callbacks set. Increment the usage count so as to
* prevent the device from entering runtime suspend.
*/
if (!sof_ops(sdev)->runtime_suspend || !sof_ops(sdev)->runtime_resume)
pm_runtime_get_noresume(sdev->dev);
if (plat_data->sof_probe_complete)
plat_data->sof_probe_complete(sdev->dev);
sdev->probe_completed = true;
return 0;
ASoC: SOF: Introduce IPC SOF client support A client in the SOF (Sound Open Firmware) context is a driver that needs to communicate with the DSP via IPC messages. The SOF core is responsible for serializing the IPC messages to the DSP from the different clients. One example of an SOF client would be an IPC test client that floods the DSP with test IPC messages to validate if the serialization works as expected. Multi-client support will also add the ability to split the existing audio cards into multiple ones, so as to e.g. to deal with HDMI with a dedicated client instead of adding HDMI to all cards. This patch introduces descriptors for SOF client driver and SOF client device along with APIs for registering and unregistering a SOF client driver, sending IPCs from a client device and accessing the SOF core debugfs root entry. Along with this, add a couple of new members to struct snd_sof_dev that will be used for maintaining the list of clients. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Co-developed-by: Fred Oh <fred.oh@linux.intel.com> Signed-off-by: Fred Oh <fred.oh@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20220210150525.30756-6-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-10 15:05:21 +00:00
sof_machine_err:
snd_sof_machine_unregister(sdev, plat_data);
fw_trace_err:
sof_fw_trace_free(sdev);
fw_run_err:
snd_sof_fw_unload(sdev);
fw_load_err:
snd_sof_ipc_free(sdev);
ipc_err:
dbg_err:
snd_sof_free_debug(sdev);
dsp_err:
snd_sof_remove(sdev);
probe_err:
sof_ops_free(sdev);
/* all resources freed, update state to match */
sof_set_fw_state(sdev, SOF_FW_BOOT_NOT_STARTED);
sdev->first_boot = true;
return ret;
}
static void sof_probe_work(struct work_struct *work)
{
struct snd_sof_dev *sdev =
container_of(work, struct snd_sof_dev, probe_work);
int ret;
ret = sof_probe_continue(sdev);
if (ret < 0) {
/* errors cannot be propagated, log */
dev_err(sdev->dev, "error: %s failed err: %d\n", __func__, ret);
}
}
int snd_sof_device_probe(struct device *dev, struct snd_sof_pdata *plat_data)
{
struct snd_sof_dev *sdev;
int ret;
sdev = devm_kzalloc(dev, sizeof(*sdev), GFP_KERNEL);
if (!sdev)
return -ENOMEM;
/* initialize sof device */
sdev->dev = dev;
ASoC: SOF: Move DSP power state transitions to platform-specific ops The DSP device substates such as D0I0/D0I3 are platform-specific. Therefore, the d0_substate field of struct snd_sof_dev is replaced with the dsp_power_state field which represents the current state of the DSP. This field holds both the device state and the platform-specific substate values. With the DSP device substates being platform-specific, the DSP power state transitions need to be performed in the platform-specific suspend/resume ops as well. In order to achieve this, the ops signature has to be modified to pass the target device state as an argument. The target substate will be determined by the platform-specific ops before performing the transition. For example, in the case of the system suspending to S0IX, the top-level SOF device suspend callback needs to only determine if the DSP will be entering D3 or remain in D0. The target substate in case the device needs to remain in D0 (D0I0 or D0I3) will be determined by the platform-specific suspend op. With the addition of the extended set of power states for the DSP, the set_power_state op for HDA platforms has to be extended to handle only the appropriate state transitions. So, the implementation for the Intel HDA platforms is also modified. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200129220726.31792-6-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-29 22:07:22 +00:00
/* initialize default DSP power state */
sdev->dsp_power_state.state = SOF_DSP_PM_D0;
sdev->pdata = plat_data;
sdev->first_boot = true;
dev_set_drvdata(dev, sdev);
if (sof_core_debug)
dev_info(dev, "sof_debug value: %#x\n", sof_core_debug);
if (sof_debug_check_flag(SOF_DBG_DSPLESS_MODE)) {
if (plat_data->desc->dspless_mode_supported) {
dev_info(dev, "Switching to DSPless mode\n");
sdev->dspless_mode_selected = true;
} else {
dev_info(dev, "DSPless mode is not supported by the platform\n");
}
}
/* check IPC support */
if (!(BIT(plat_data->ipc_type) & plat_data->desc->ipc_supported_mask)) {
dev_err(dev, "ipc_type %d is not supported on this platform, mask is %#x\n",
plat_data->ipc_type, plat_data->desc->ipc_supported_mask);
return -EINVAL;
}
/* init ops, if necessary */
ret = sof_ops_init(sdev);
if (ret < 0)
return ret;
/* check all mandatory ops */
if (!sof_ops(sdev) || !sof_ops(sdev)->probe) {
sof_ops_free(sdev);
dev_err(dev, "missing mandatory ops\n");
return -EINVAL;
}
if (!sdev->dspless_mode_selected &&
(!sof_ops(sdev)->run || !sof_ops(sdev)->block_read ||
!sof_ops(sdev)->block_write || !sof_ops(sdev)->send_msg ||
!sof_ops(sdev)->load_firmware || !sof_ops(sdev)->ipc_msg_data)) {
sof_ops_free(sdev);
dev_err(dev, "missing mandatory DSP ops\n");
return -EINVAL;
}
INIT_LIST_HEAD(&sdev->pcm_list);
INIT_LIST_HEAD(&sdev->kcontrol_list);
INIT_LIST_HEAD(&sdev->widget_list);
INIT_LIST_HEAD(&sdev->pipeline_list);
INIT_LIST_HEAD(&sdev->dai_list);
INIT_LIST_HEAD(&sdev->dai_link_list);
INIT_LIST_HEAD(&sdev->route_list);
ASoC: SOF: Introduce IPC SOF client support A client in the SOF (Sound Open Firmware) context is a driver that needs to communicate with the DSP via IPC messages. The SOF core is responsible for serializing the IPC messages to the DSP from the different clients. One example of an SOF client would be an IPC test client that floods the DSP with test IPC messages to validate if the serialization works as expected. Multi-client support will also add the ability to split the existing audio cards into multiple ones, so as to e.g. to deal with HDMI with a dedicated client instead of adding HDMI to all cards. This patch introduces descriptors for SOF client driver and SOF client device along with APIs for registering and unregistering a SOF client driver, sending IPCs from a client device and accessing the SOF core debugfs root entry. Along with this, add a couple of new members to struct snd_sof_dev that will be used for maintaining the list of clients. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Co-developed-by: Fred Oh <fred.oh@linux.intel.com> Signed-off-by: Fred Oh <fred.oh@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20220210150525.30756-6-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-10 15:05:21 +00:00
INIT_LIST_HEAD(&sdev->ipc_client_list);
INIT_LIST_HEAD(&sdev->ipc_rx_handler_list);
INIT_LIST_HEAD(&sdev->fw_state_handler_list);
spin_lock_init(&sdev->ipc_lock);
spin_lock_init(&sdev->hw_lock);
mutex_init(&sdev->power_state_access);
ASoC: SOF: Introduce IPC SOF client support A client in the SOF (Sound Open Firmware) context is a driver that needs to communicate with the DSP via IPC messages. The SOF core is responsible for serializing the IPC messages to the DSP from the different clients. One example of an SOF client would be an IPC test client that floods the DSP with test IPC messages to validate if the serialization works as expected. Multi-client support will also add the ability to split the existing audio cards into multiple ones, so as to e.g. to deal with HDMI with a dedicated client instead of adding HDMI to all cards. This patch introduces descriptors for SOF client driver and SOF client device along with APIs for registering and unregistering a SOF client driver, sending IPCs from a client device and accessing the SOF core debugfs root entry. Along with this, add a couple of new members to struct snd_sof_dev that will be used for maintaining the list of clients. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Co-developed-by: Fred Oh <fred.oh@linux.intel.com> Signed-off-by: Fred Oh <fred.oh@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20220210150525.30756-6-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-10 15:05:21 +00:00
mutex_init(&sdev->ipc_client_mutex);
mutex_init(&sdev->client_event_handler_mutex);
/* set default timeouts if none provided */
if (plat_data->desc->ipc_timeout == 0)
sdev->ipc_timeout = TIMEOUT_DEFAULT_IPC_MS;
else
sdev->ipc_timeout = plat_data->desc->ipc_timeout;
if (plat_data->desc->boot_timeout == 0)
sdev->boot_timeout = TIMEOUT_DEFAULT_BOOT_MS;
else
sdev->boot_timeout = plat_data->desc->boot_timeout;
ASoC: SOF: Introduce IPC SOF client support A client in the SOF (Sound Open Firmware) context is a driver that needs to communicate with the DSP via IPC messages. The SOF core is responsible for serializing the IPC messages to the DSP from the different clients. One example of an SOF client would be an IPC test client that floods the DSP with test IPC messages to validate if the serialization works as expected. Multi-client support will also add the ability to split the existing audio cards into multiple ones, so as to e.g. to deal with HDMI with a dedicated client instead of adding HDMI to all cards. This patch introduces descriptors for SOF client driver and SOF client device along with APIs for registering and unregistering a SOF client driver, sending IPCs from a client device and accessing the SOF core debugfs root entry. Along with this, add a couple of new members to struct snd_sof_dev that will be used for maintaining the list of clients. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Co-developed-by: Fred Oh <fred.oh@linux.intel.com> Signed-off-by: Fred Oh <fred.oh@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20220210150525.30756-6-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-10 15:05:21 +00:00
sof_set_fw_state(sdev, SOF_FW_BOOT_NOT_STARTED);
if (IS_ENABLED(CONFIG_SND_SOC_SOF_PROBE_WORK_QUEUE)) {
INIT_WORK(&sdev->probe_work, sof_probe_work);
schedule_work(&sdev->probe_work);
return 0;
}
return sof_probe_continue(sdev);
}
EXPORT_SYMBOL(snd_sof_device_probe);
bool snd_sof_device_probe_completed(struct device *dev)
{
struct snd_sof_dev *sdev = dev_get_drvdata(dev);
return sdev->probe_completed;
}
EXPORT_SYMBOL(snd_sof_device_probe_completed);
int snd_sof_device_remove(struct device *dev)
{
struct snd_sof_dev *sdev = dev_get_drvdata(dev);
struct snd_sof_pdata *pdata = sdev->pdata;
int ret;
if (IS_ENABLED(CONFIG_SND_SOC_SOF_PROBE_WORK_QUEUE))
cancel_work_sync(&sdev->probe_work);
ASoC: SOF: Introduce IPC SOF client support A client in the SOF (Sound Open Firmware) context is a driver that needs to communicate with the DSP via IPC messages. The SOF core is responsible for serializing the IPC messages to the DSP from the different clients. One example of an SOF client would be an IPC test client that floods the DSP with test IPC messages to validate if the serialization works as expected. Multi-client support will also add the ability to split the existing audio cards into multiple ones, so as to e.g. to deal with HDMI with a dedicated client instead of adding HDMI to all cards. This patch introduces descriptors for SOF client driver and SOF client device along with APIs for registering and unregistering a SOF client driver, sending IPCs from a client device and accessing the SOF core debugfs root entry. Along with this, add a couple of new members to struct snd_sof_dev that will be used for maintaining the list of clients. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Co-developed-by: Fred Oh <fred.oh@linux.intel.com> Signed-off-by: Fred Oh <fred.oh@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20220210150525.30756-6-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-10 15:05:21 +00:00
/*
* Unregister any registered client device first before IPC and debugfs
* to allow client drivers to be removed cleanly
*/
sof_unregister_clients(sdev);
/*
* Unregister machine driver. This will unbind the snd_card which
* will remove the component driver and unload the topology
* before freeing the snd_card.
*/
snd_sof_machine_unregister(sdev, pdata);
if (sdev->fw_state > SOF_FW_BOOT_NOT_STARTED) {
sof_fw_trace_free(sdev);
ret = snd_sof_dsp_power_down_notify(sdev);
if (ret < 0)
dev_warn(dev, "error: %d failed to prepare DSP for device removal",
ret);
snd_sof_ipc_free(sdev);
snd_sof_free_debug(sdev);
snd_sof_remove(sdev);
}
sof_ops_free(sdev);
/* release firmware */
snd_sof_fw_unload(sdev);
return 0;
}
EXPORT_SYMBOL(snd_sof_device_remove);
int snd_sof_device_shutdown(struct device *dev)
{
struct snd_sof_dev *sdev = dev_get_drvdata(dev);
if (IS_ENABLED(CONFIG_SND_SOC_SOF_PROBE_WORK_QUEUE))
cancel_work_sync(&sdev->probe_work);
if (sdev->fw_state == SOF_FW_BOOT_COMPLETE)
return snd_sof_shutdown(sdev);
return 0;
}
EXPORT_SYMBOL(snd_sof_device_shutdown);
MODULE_AUTHOR("Liam Girdwood");
MODULE_DESCRIPTION("Sound Open Firmware (SOF) Core");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_ALIAS("platform:sof-audio");
MODULE_IMPORT_NS(SND_SOC_SOF_CLIENT);