linux-stable/fs/exec.c

2099 lines
49 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/fs/exec.c
*
* Copyright (C) 1991, 1992 Linus Torvalds
*/
/*
* #!-checking implemented by tytso.
*/
/*
* Demand-loading implemented 01.12.91 - no need to read anything but
* the header into memory. The inode of the executable is put into
* "current->executable", and page faults do the actual loading. Clean.
*
* Once more I can proudly say that linux stood up to being changed: it
* was less than 2 hours work to get demand-loading completely implemented.
*
* Demand loading changed July 1993 by Eric Youngdale. Use mmap instead,
* current->executable is only used by the procfs. This allows a dispatch
* table to check for several different types of binary formats. We keep
* trying until we recognize the file or we run out of supported binary
fs: exec: apply CLOEXEC before changing dumpable task flags If you have a process that has set itself to be non-dumpable, and it then undergoes exec(2), any CLOEXEC file descriptors it has open are "exposed" during a race window between the dumpable flags of the process being reset for exec(2) and CLOEXEC being applied to the file descriptors. This can be exploited by a process by attempting to access /proc/<pid>/fd/... during this window, without requiring CAP_SYS_PTRACE. The race in question is after set_dumpable has been (for get_link, though the trace is basically the same for readlink): [vfs] -> proc_pid_link_inode_operations.get_link -> proc_pid_get_link -> proc_fd_access_allowed -> ptrace_may_access(task, PTRACE_MODE_READ_FSCREDS); Which will return 0, during the race window and CLOEXEC file descriptors will still be open during this window because do_close_on_exec has not been called yet. As a result, the ordering of these calls should be reversed to avoid this race window. This is of particular concern to container runtimes, where joining a PID namespace with file descriptors referring to the host filesystem can result in security issues (since PRCTL_SET_DUMPABLE doesn't protect against access of CLOEXEC file descriptors -- file descriptors which may reference filesystem objects the container shouldn't have access to). Cc: dev@opencontainers.org Cc: <stable@vger.kernel.org> # v3.2+ Reported-by: Michael Crosby <crosbymichael@gmail.com> Signed-off-by: Aleksa Sarai <asarai@suse.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-12-21 05:26:24 +00:00
* formats.
*/
#include <linux/kernel_read_file.h>
#include <linux/slab.h>
#include <linux/file.h>
#include <linux/fdtable.h>
#include <linux/mm.h>
mm: per-thread vma caching This patch is a continuation of efforts trying to optimize find_vma(), avoiding potentially expensive rbtree walks to locate a vma upon faults. The original approach (https://lkml.org/lkml/2013/11/1/410), where the largest vma was also cached, ended up being too specific and random, thus further comparison with other approaches were needed. There are two things to consider when dealing with this, the cache hit rate and the latency of find_vma(). Improving the hit-rate does not necessarily translate in finding the vma any faster, as the overhead of any fancy caching schemes can be too high to consider. We currently cache the last used vma for the whole address space, which provides a nice optimization, reducing the total cycles in find_vma() by up to 250%, for workloads with good locality. On the other hand, this simple scheme is pretty much useless for workloads with poor locality. Analyzing ebizzy runs shows that, no matter how many threads are running, the mmap_cache hit rate is less than 2%, and in many situations below 1%. The proposed approach is to replace this scheme with a small per-thread cache, maximizing hit rates at a very low maintenance cost. Invalidations are performed by simply bumping up a 32-bit sequence number. The only expensive operation is in the rare case of a seq number overflow, where all caches that share the same address space are flushed. Upon a miss, the proposed replacement policy is based on the page number that contains the virtual address in question. Concretely, the following results are seen on an 80 core, 8 socket x86-64 box: 1) System bootup: Most programs are single threaded, so the per-thread scheme does improve ~50% hit rate by just adding a few more slots to the cache. +----------------+----------+------------------+ | caching scheme | hit-rate | cycles (billion) | +----------------+----------+------------------+ | baseline | 50.61% | 19.90 | | patched | 73.45% | 13.58 | +----------------+----------+------------------+ 2) Kernel build: This one is already pretty good with the current approach as we're dealing with good locality. +----------------+----------+------------------+ | caching scheme | hit-rate | cycles (billion) | +----------------+----------+------------------+ | baseline | 75.28% | 11.03 | | patched | 88.09% | 9.31 | +----------------+----------+------------------+ 3) Oracle 11g Data Mining (4k pages): Similar to the kernel build workload. +----------------+----------+------------------+ | caching scheme | hit-rate | cycles (billion) | +----------------+----------+------------------+ | baseline | 70.66% | 17.14 | | patched | 91.15% | 12.57 | +----------------+----------+------------------+ 4) Ebizzy: There's a fair amount of variation from run to run, but this approach always shows nearly perfect hit rates, while baseline is just about non-existent. The amounts of cycles can fluctuate between anywhere from ~60 to ~116 for the baseline scheme, but this approach reduces it considerably. For instance, with 80 threads: +----------------+----------+------------------+ | caching scheme | hit-rate | cycles (billion) | +----------------+----------+------------------+ | baseline | 1.06% | 91.54 | | patched | 99.97% | 14.18 | +----------------+----------+------------------+ [akpm@linux-foundation.org: fix nommu build, per Davidlohr] [akpm@linux-foundation.org: document vmacache_valid() logic] [akpm@linux-foundation.org: attempt to untangle header files] [akpm@linux-foundation.org: add vmacache_find() BUG_ON] [hughd@google.com: add vmacache_valid_mm() (from Oleg)] [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: adjust and enhance comments] Signed-off-by: Davidlohr Bueso <davidlohr@hp.com> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Michel Lespinasse <walken@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Tested-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 22:37:25 +00:00
#include <linux/vmacache.h>
#include <linux/stat.h>
#include <linux/fcntl.h>
#include <linux/swap.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/sched/mm.h>
#include <linux/sched/coredump.h>
#include <linux/sched/signal.h>
#include <linux/sched/numa_balancing.h>
#include <linux/sched/task.h>
#include <linux/pagemap.h>
perf: Do the big rename: Performance Counters -> Performance Events Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 10:02:48 +00:00
#include <linux/perf_event.h>
#include <linux/highmem.h>
#include <linux/spinlock.h>
#include <linux/key.h>
#include <linux/personality.h>
#include <linux/binfmts.h>
#include <linux/utsname.h>
#include <linux/pid_namespace.h>
#include <linux/module.h>
#include <linux/namei.h>
#include <linux/mount.h>
#include <linux/security.h>
#include <linux/syscalls.h>
#include <linux/tsacct_kern.h>
#include <linux/cn_proc.h>
#include <linux/audit.h>
#include <linux/tracehook.h>
#include <linux/kmod.h>
#include <linux/fsnotify.h>
#include <linux/fs_struct.h>
#include <linux/oom.h>
#include <linux/compat.h>
#include <linux/vmalloc.h>
#include <linux/io_uring.h>
kernel: Implement selective syscall userspace redirection Introduce a mechanism to quickly disable/enable syscall handling for a specific process and redirect to userspace via SIGSYS. This is useful for processes with parts that require syscall redirection and parts that don't, but who need to perform this boundary crossing really fast, without paying the cost of a system call to reconfigure syscall handling on each boundary transition. This is particularly important for Windows games running over Wine. The proposed interface looks like this: prctl(PR_SET_SYSCALL_USER_DISPATCH, <op>, <off>, <length>, [selector]) The range [<offset>,<offset>+<length>) is a part of the process memory map that is allowed to by-pass the redirection code and dispatch syscalls directly, such that in fast paths a process doesn't need to disable the trap nor the kernel has to check the selector. This is essential to return from SIGSYS to a blocked area without triggering another SIGSYS from rt_sigreturn. selector is an optional pointer to a char-sized userspace memory region that has a key switch for the mechanism. This key switch is set to either PR_SYS_DISPATCH_ON, PR_SYS_DISPATCH_OFF to enable and disable the redirection without calling the kernel. The feature is meant to be set per-thread and it is disabled on fork/clone/execv. Internally, this doesn't add overhead to the syscall hot path, and it requires very little per-architecture support. I avoided using seccomp, even though it duplicates some functionality, due to previous feedback that maybe it shouldn't mix with seccomp since it is not a security mechanism. And obviously, this should never be considered a security mechanism, since any part of the program can by-pass it by using the syscall dispatcher. For the sysinfo benchmark, which measures the overhead added to executing a native syscall that doesn't require interception, the overhead using only the direct dispatcher region to issue syscalls is pretty much irrelevant. The overhead of using the selector goes around 40ns for a native (unredirected) syscall in my system, and it is (as expected) dominated by the supervisor-mode user-address access. In fact, with SMAP off, the overhead is consistently less than 5ns on my test box. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andy Lutomirski <luto@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20201127193238.821364-4-krisman@collabora.com
2020-11-27 19:32:34 +00:00
#include <linux/syscall_user_dispatch.h>
#include <linux/uaccess.h>
#include <asm/mmu_context.h>
#include <asm/tlb.h>
tracepoint: add tracepoints for debugging oom_score_adj oom_score_adj is used for guarding processes from OOM-Killer. One of problem is that it's inherited at fork(). When a daemon set oom_score_adj and make children, it's hard to know where the value is set. This patch adds some tracepoints useful for debugging. This patch adds 3 trace points. - creating new task - renaming a task (exec) - set oom_score_adj To debug, users need to enable some trace pointer. Maybe filtering is useful as # EVENT=/sys/kernel/debug/tracing/events/task/ # echo "oom_score_adj != 0" > $EVENT/task_newtask/filter # echo "oom_score_adj != 0" > $EVENT/task_rename/filter # echo 1 > $EVENT/enable # EVENT=/sys/kernel/debug/tracing/events/oom/ # echo 1 > $EVENT/enable output will be like this. # grep oom /sys/kernel/debug/tracing/trace bash-7699 [007] d..3 5140.744510: oom_score_adj_update: pid=7699 comm=bash oom_score_adj=-1000 bash-7699 [007] ...1 5151.818022: task_newtask: pid=7729 comm=bash clone_flags=1200011 oom_score_adj=-1000 ls-7729 [003] ...2 5151.818504: task_rename: pid=7729 oldcomm=bash newcomm=ls oom_score_adj=-1000 bash-7699 [002] ...1 5175.701468: task_newtask: pid=7730 comm=bash clone_flags=1200011 oom_score_adj=-1000 grep-7730 [007] ...2 5175.701993: task_rename: pid=7730 oldcomm=bash newcomm=grep oom_score_adj=-1000 Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10 23:08:09 +00:00
#include <trace/events/task.h>
CRED: Make execve() take advantage of copy-on-write credentials Make execve() take advantage of copy-on-write credentials, allowing it to set up the credentials in advance, and then commit the whole lot after the point of no return. This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). The credential bits from struct linux_binprm are, for the most part, replaced with a single credentials pointer (bprm->cred). This means that all the creds can be calculated in advance and then applied at the point of no return with no possibility of failure. I would like to replace bprm->cap_effective with: cap_isclear(bprm->cap_effective) but this seems impossible due to special behaviour for processes of pid 1 (they always retain their parent's capability masks where normally they'd be changed - see cap_bprm_set_creds()). The following sequence of events now happens: (a) At the start of do_execve, the current task's cred_exec_mutex is locked to prevent PTRACE_ATTACH from obsoleting the calculation of creds that we make. (a) prepare_exec_creds() is then called to make a copy of the current task's credentials and prepare it. This copy is then assigned to bprm->cred. This renders security_bprm_alloc() and security_bprm_free() unnecessary, and so they've been removed. (b) The determination of unsafe execution is now performed immediately after (a) rather than later on in the code. The result is stored in bprm->unsafe for future reference. (c) prepare_binprm() is called, possibly multiple times. (i) This applies the result of set[ug]id binaries to the new creds attached to bprm->cred. Personality bit clearance is recorded, but now deferred on the basis that the exec procedure may yet fail. (ii) This then calls the new security_bprm_set_creds(). This should calculate the new LSM and capability credentials into *bprm->cred. This folds together security_bprm_set() and parts of security_bprm_apply_creds() (these two have been removed). Anything that might fail must be done at this point. (iii) bprm->cred_prepared is set to 1. bprm->cred_prepared is 0 on the first pass of the security calculations, and 1 on all subsequent passes. This allows SELinux in (ii) to base its calculations only on the initial script and not on the interpreter. (d) flush_old_exec() is called to commit the task to execution. This performs the following steps with regard to credentials: (i) Clear pdeath_signal and set dumpable on certain circumstances that may not be covered by commit_creds(). (ii) Clear any bits in current->personality that were deferred from (c.i). (e) install_exec_creds() [compute_creds() as was] is called to install the new credentials. This performs the following steps with regard to credentials: (i) Calls security_bprm_committing_creds() to apply any security requirements, such as flushing unauthorised files in SELinux, that must be done before the credentials are changed. This is made up of bits of security_bprm_apply_creds() and security_bprm_post_apply_creds(), both of which have been removed. This function is not allowed to fail; anything that might fail must have been done in (c.ii). (ii) Calls commit_creds() to apply the new credentials in a single assignment (more or less). Possibly pdeath_signal and dumpable should be part of struct creds. (iii) Unlocks the task's cred_replace_mutex, thus allowing PTRACE_ATTACH to take place. (iv) Clears The bprm->cred pointer as the credentials it was holding are now immutable. (v) Calls security_bprm_committed_creds() to apply any security alterations that must be done after the creds have been changed. SELinux uses this to flush signals and signal handlers. (f) If an error occurs before (d.i), bprm_free() will call abort_creds() to destroy the proposed new credentials and will then unlock cred_replace_mutex. No changes to the credentials will have been made. (2) LSM interface. A number of functions have been changed, added or removed: (*) security_bprm_alloc(), ->bprm_alloc_security() (*) security_bprm_free(), ->bprm_free_security() Removed in favour of preparing new credentials and modifying those. (*) security_bprm_apply_creds(), ->bprm_apply_creds() (*) security_bprm_post_apply_creds(), ->bprm_post_apply_creds() Removed; split between security_bprm_set_creds(), security_bprm_committing_creds() and security_bprm_committed_creds(). (*) security_bprm_set(), ->bprm_set_security() Removed; folded into security_bprm_set_creds(). (*) security_bprm_set_creds(), ->bprm_set_creds() New. The new credentials in bprm->creds should be checked and set up as appropriate. bprm->cred_prepared is 0 on the first call, 1 on the second and subsequent calls. (*) security_bprm_committing_creds(), ->bprm_committing_creds() (*) security_bprm_committed_creds(), ->bprm_committed_creds() New. Apply the security effects of the new credentials. This includes closing unauthorised files in SELinux. This function may not fail. When the former is called, the creds haven't yet been applied to the process; when the latter is called, they have. The former may access bprm->cred, the latter may not. (3) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) The bprm_security_struct struct has been removed in favour of using the credentials-under-construction approach. (c) flush_unauthorized_files() now takes a cred pointer and passes it on to inode_has_perm(), file_has_perm() and dentry_open(). Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 23:39:24 +00:00
#include "internal.h"
#include <trace/events/sched.h>
exec: Compute file based creds only once Move the computation of creds from prepare_binfmt into begin_new_exec so that the creds need only be computed once. This is just code reorganization no semantic changes of any kind are made. Moving the computation is safe. I have looked through the kernel and verified none of the binfmts look at bprm->cred directly, and that there are no helpers that look at bprm->cred indirectly. Which means that it is not a problem to compute the bprm->cred later in the execution flow as it is not used until it becomes current->cred. A new function bprm_creds_from_file is added to contain the work that needs to be done. bprm_creds_from_file first computes which file bprm->executable or most likely bprm->file that the bprm->creds will be computed from. The funciton bprm_fill_uid is updated to receive the file instead of accessing bprm->file. The now unnecessary work needed to reset the bprm->cred->euid, and bprm->cred->egid is removed from brpm_fill_uid. A small comment to document that bprm_fill_uid now only deals with the work to handle suid and sgid files. The default case is already heandled by prepare_exec_creds. The function security_bprm_repopulate_creds is renamed security_bprm_creds_from_file and now is explicitly passed the file from which to compute the creds. The documentation of the bprm_creds_from_file security hook is updated to explain when the hook is called and what it needs to do. The file is passed from cap_bprm_creds_from_file into get_file_caps so that the caps are computed for the appropriate file. The now unnecessary work in cap_bprm_creds_from_file to reset the ambient capabilites has been removed. A small comment to document that the work of cap_bprm_creds_from_file is to read capabilities from the files secureity attribute and derive capabilities from the fact the user had uid 0 has been added. Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-05-30 03:00:54 +00:00
static int bprm_creds_from_file(struct linux_binprm *bprm);
[PATCH] setuid core dump Add a new `suid_dumpable' sysctl: This value can be used to query and set the core dump mode for setuid or otherwise protected/tainted binaries. The modes are 0 - (default) - traditional behaviour. Any process which has changed privilege levels or is execute only will not be dumped 1 - (debug) - all processes dump core when possible. The core dump is owned by the current user and no security is applied. This is intended for system debugging situations only. Ptrace is unchecked. 2 - (suidsafe) - any binary which normally would not be dumped is dumped readable by root only. This allows the end user to remove such a dump but not access it directly. For security reasons core dumps in this mode will not overwrite one another or other files. This mode is appropriate when adminstrators are attempting to debug problems in a normal environment. (akpm: > > +EXPORT_SYMBOL(suid_dumpable); > > EXPORT_SYMBOL_GPL? No problem to me. > > if (current->euid == current->uid && current->egid == current->gid) > > current->mm->dumpable = 1; > > Should this be SUID_DUMP_USER? Actually the feedback I had from last time was that the SUID_ defines should go because its clearer to follow the numbers. They can go everywhere (and there are lots of places where dumpable is tested/used as a bool in untouched code) > Maybe this should be renamed to `dump_policy' or something. Doing that > would help us catch any code which isn't using the #defines, too. Fair comment. The patch was designed to be easy to maintain for Red Hat rather than for merging. Changing that field would create a gigantic diff because it is used all over the place. ) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 07:09:43 +00:00
int suid_dumpable = 0;
static LIST_HEAD(formats);
static DEFINE_RWLOCK(binfmt_lock);
void __register_binfmt(struct linux_binfmt * fmt, int insert)
{
write_lock(&binfmt_lock);
insert ? list_add(&fmt->lh, &formats) :
list_add_tail(&fmt->lh, &formats);
write_unlock(&binfmt_lock);
}
EXPORT_SYMBOL(__register_binfmt);
void unregister_binfmt(struct linux_binfmt * fmt)
{
write_lock(&binfmt_lock);
list_del(&fmt->lh);
write_unlock(&binfmt_lock);
}
EXPORT_SYMBOL(unregister_binfmt);
static inline void put_binfmt(struct linux_binfmt * fmt)
{
module_put(fmt->module);
}
vfs: Commit to never having exectuables on proc and sysfs. Today proc and sysfs do not contain any executable files. Several applications today mount proc or sysfs without noexec and nosuid and then depend on there being no exectuables files on proc or sysfs. Having any executable files show on proc or sysfs would cause a user space visible regression, and most likely security problems. Therefore commit to never allowing executables on proc and sysfs by adding a new flag to mark them as filesystems without executables and enforce that flag. Test the flag where MNT_NOEXEC is tested today, so that the only user visible effect will be that exectuables will be treated as if the execute bit is cleared. The filesystems proc and sysfs do not currently incoporate any executable files so this does not result in any user visible effects. This makes it unnecessary to vet changes to proc and sysfs tightly for adding exectuable files or changes to chattr that would modify existing files, as no matter what the individual file say they will not be treated as exectuable files by the vfs. Not having to vet changes to closely is important as without this we are only one proc_create call (or another goof up in the implementation of notify_change) from having problematic executables on proc. Those mistakes are all too easy to make and would create a situation where there are security issues or the assumptions of some program having to be broken (and cause userspace regressions). Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2015-06-29 19:42:03 +00:00
bool path_noexec(const struct path *path)
{
return (path->mnt->mnt_flags & MNT_NOEXEC) ||
(path->mnt->mnt_sb->s_iflags & SB_I_NOEXEC);
}
#ifdef CONFIG_USELIB
/*
* Note that a shared library must be both readable and executable due to
* security reasons.
*
* Also note that we take the address to load from from the file itself.
*/
SYSCALL_DEFINE1(uselib, const char __user *, library)
{
struct linux_binfmt *fmt;
struct file *file;
struct filename *tmp = getname(library);
int error = PTR_ERR(tmp);
static const struct open_flags uselib_flags = {
.open_flag = O_LARGEFILE | O_RDONLY | __FMODE_EXEC,
.acc_mode = MAY_READ | MAY_EXEC,
.intent = LOOKUP_OPEN,
.lookup_flags = LOOKUP_FOLLOW,
};
if (IS_ERR(tmp))
goto out;
file = do_filp_open(AT_FDCWD, tmp, &uselib_flags);
putname(tmp);
error = PTR_ERR(file);
if (IS_ERR(file))
goto out;
exec: move S_ISREG() check earlier The execve(2)/uselib(2) syscalls have always rejected non-regular files. Recently, it was noticed that a deadlock was introduced when trying to execute pipes, as the S_ISREG() test was happening too late. This was fixed in commit 73601ea5b7b1 ("fs/open.c: allow opening only regular files during execve()"), but it was added after inode_permission() had already run, which meant LSMs could see bogus attempts to execute non-regular files. Move the test into the other inode type checks (which already look for other pathological conditions[1]). Since there is no need to use FMODE_EXEC while we still have access to "acc_mode", also switch the test to MAY_EXEC. Also include a comment with the redundant S_ISREG() checks at the end of execve(2)/uselib(2) to note that they are present to avoid any mistakes. My notes on the call path, and related arguments, checks, etc: do_open_execat() struct open_flags open_exec_flags = { .open_flag = O_LARGEFILE | O_RDONLY | __FMODE_EXEC, .acc_mode = MAY_EXEC, ... do_filp_open(dfd, filename, open_flags) path_openat(nameidata, open_flags, flags) file = alloc_empty_file(open_flags, current_cred()); do_open(nameidata, file, open_flags) may_open(path, acc_mode, open_flag) /* new location of MAY_EXEC vs S_ISREG() test */ inode_permission(inode, MAY_OPEN | acc_mode) security_inode_permission(inode, acc_mode) vfs_open(path, file) do_dentry_open(file, path->dentry->d_inode, open) /* old location of FMODE_EXEC vs S_ISREG() test */ security_file_open(f) open() [1] https://lore.kernel.org/lkml/202006041910.9EF0C602@keescook/ Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Eric Biggers <ebiggers3@gmail.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Link: http://lkml.kernel.org/r/20200605160013.3954297-3-keescook@chromium.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 01:36:26 +00:00
/*
* may_open() has already checked for this, so it should be
* impossible to trip now. But we need to be extra cautious
* and check again at the very end too.
*/
exec: change uselib(2) IS_SREG() failure to EACCES Patch series "Relocate execve() sanity checks", v2. While looking at the code paths for the proposed O_MAYEXEC flag, I saw some things that looked like they should be fixed up. exec: Change uselib(2) IS_SREG() failure to EACCES This just regularizes the return code on uselib(2). exec: Move S_ISREG() check earlier This moves the S_ISREG() check even earlier than it was already. exec: Move path_noexec() check earlier This adds the path_noexec() check to the same place as the S_ISREG() check. This patch (of 3): Change uselib(2)' S_ISREG() error return to EACCES instead of EINVAL so the behavior matches execve(2), and the seemingly documented value. The "not a regular file" failure mode of execve(2) is explicitly documented[1], but it is not mentioned in uselib(2)[2] which does, however, say that open(2) and mmap(2) errors may apply. The documentation for open(2) does not include a "not a regular file" error[3], but mmap(2) does[4], and it is EACCES. [1] http://man7.org/linux/man-pages/man2/execve.2.html#ERRORS [2] http://man7.org/linux/man-pages/man2/uselib.2.html#ERRORS [3] http://man7.org/linux/man-pages/man2/open.2.html#ERRORS [4] http://man7.org/linux/man-pages/man2/mmap.2.html#ERRORS Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Eric Biggers <ebiggers3@gmail.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Link: http://lkml.kernel.org/r/20200605160013.3954297-1-keescook@chromium.org Link: http://lkml.kernel.org/r/20200605160013.3954297-2-keescook@chromium.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 01:36:23 +00:00
error = -EACCES;
exec: move path_noexec() check earlier The path_noexec() check, like the regular file check, was happening too late, letting LSMs see impossible execve()s. Check it earlier as well in may_open() and collect the redundant fs/exec.c path_noexec() test under the same robustness comment as the S_ISREG() check. My notes on the call path, and related arguments, checks, etc: do_open_execat() struct open_flags open_exec_flags = { .open_flag = O_LARGEFILE | O_RDONLY | __FMODE_EXEC, .acc_mode = MAY_EXEC, ... do_filp_open(dfd, filename, open_flags) path_openat(nameidata, open_flags, flags) file = alloc_empty_file(open_flags, current_cred()); do_open(nameidata, file, open_flags) may_open(path, acc_mode, open_flag) /* new location of MAY_EXEC vs path_noexec() test */ inode_permission(inode, MAY_OPEN | acc_mode) security_inode_permission(inode, acc_mode) vfs_open(path, file) do_dentry_open(file, path->dentry->d_inode, open) security_file_open(f) open() /* old location of path_noexec() test */ Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Eric Biggers <ebiggers3@gmail.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Link: http://lkml.kernel.org/r/20200605160013.3954297-4-keescook@chromium.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 01:36:30 +00:00
if (WARN_ON_ONCE(!S_ISREG(file_inode(file)->i_mode) ||
path_noexec(&file->f_path)))
goto exit;
fsnotify_open(file);
error = -ENOEXEC;
read_lock(&binfmt_lock);
list_for_each_entry(fmt, &formats, lh) {
if (!fmt->load_shlib)
continue;
if (!try_module_get(fmt->module))
continue;
read_unlock(&binfmt_lock);
error = fmt->load_shlib(file);
read_lock(&binfmt_lock);
put_binfmt(fmt);
if (error != -ENOEXEC)
break;
}
read_unlock(&binfmt_lock);
exit:
fput(file);
out:
return error;
}
#endif /* #ifdef CONFIG_USELIB */
#ifdef CONFIG_MMU
/*
* The nascent bprm->mm is not visible until exec_mmap() but it can
* use a lot of memory, account these pages in current->mm temporary
* for oom_badness()->get_mm_rss(). Once exec succeeds or fails, we
* change the counter back via acct_arg_size(0).
*/
static void acct_arg_size(struct linux_binprm *bprm, unsigned long pages)
{
struct mm_struct *mm = current->mm;
long diff = (long)(pages - bprm->vma_pages);
if (!mm || !diff)
return;
bprm->vma_pages = pages;
add_mm_counter(mm, MM_ANONPAGES, diff);
}
static struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos,
int write)
{
struct page *page;
int ret;
unsigned int gup_flags = FOLL_FORCE;
#ifdef CONFIG_STACK_GROWSUP
if (write) {
ret = expand_downwards(bprm->vma, pos);
if (ret < 0)
return NULL;
}
#endif
if (write)
gup_flags |= FOLL_WRITE;
mm/gup: Introduce get_user_pages_remote() For protection keys, we need to understand whether protections should be enforced in software or not. In general, we enforce protections when working on our own task, but not when on others. We call these "current" and "remote" operations. This patch introduces a new get_user_pages() variant: get_user_pages_remote() Which is a replacement for when get_user_pages() is called on non-current tsk/mm. We also introduce a new gup flag: FOLL_REMOTE which can be used for the "__" gup variants to get this new behavior. The uprobes is_trap_at_addr() location holds mmap_sem and calls get_user_pages(current->mm) on an instruction address. This makes it a pretty unique gup caller. Being an instruction access and also really originating from the kernel (vs. the app), I opted to consider this a 'remote' access where protection keys will not be enforced. Without protection keys, this patch should not change any behavior. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave@sr71.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: jack@suse.cz Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20160212210154.3F0E51EA@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-12 21:01:54 +00:00
/*
* We are doing an exec(). 'current' is the process
* doing the exec and bprm->mm is the new process's mm.
*/
mmap_read_lock(bprm->mm);
ret = get_user_pages_remote(bprm->mm, pos, 1, gup_flags,
mm: add locked parameter to get_user_pages_remote() Patch series "mm: unexport __get_user_pages_unlocked()". This patch series continues the cleanup of get_user_pages*() functions taking advantage of the fact we can now pass gup_flags as we please. It firstly adds an additional 'locked' parameter to get_user_pages_remote() to allow for its callers to utilise VM_FAULT_RETRY functionality. This is necessary as the invocation of __get_user_pages_unlocked() in process_vm_rw_single_vec() makes use of this and no other existing higher level function would allow it to do so. Secondly existing callers of __get_user_pages_unlocked() are replaced with the appropriate higher-level replacement - get_user_pages_unlocked() if the current task and memory descriptor are referenced, or get_user_pages_remote() if other task/memory descriptors are referenced (having acquiring mmap_sem.) This patch (of 2): Add a int *locked parameter to get_user_pages_remote() to allow VM_FAULT_RETRY faulting behaviour similar to get_user_pages_[un]locked(). Taking into account the previous adjustments to get_user_pages*() functions allowing for the passing of gup_flags, we are now in a position where __get_user_pages_unlocked() need only be exported for his ability to allow VM_FAULT_RETRY behaviour, this adjustment allows us to subsequently unexport __get_user_pages_unlocked() as well as allowing for future flexibility in the use of get_user_pages_remote(). [sfr@canb.auug.org.au: merge fix for get_user_pages_remote API change] Link: http://lkml.kernel.org/r/20161122210511.024ec341@canb.auug.org.au Link: http://lkml.kernel.org/r/20161027095141.2569-2-lstoakes@gmail.com Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Jan Kara <jack@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krcmar <rkrcmar@redhat.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-14 23:06:52 +00:00
&page, NULL, NULL);
mmap_read_unlock(bprm->mm);
if (ret <= 0)
return NULL;
if (write)
acct_arg_size(bprm, vma_pages(bprm->vma));
return page;
}
static void put_arg_page(struct page *page)
{
put_page(page);
}
static void free_arg_pages(struct linux_binprm *bprm)
{
}
static void flush_arg_page(struct linux_binprm *bprm, unsigned long pos,
struct page *page)
{
flush_cache_page(bprm->vma, pos, page_to_pfn(page));
}
static int __bprm_mm_init(struct linux_binprm *bprm)
{
int err;
struct vm_area_struct *vma = NULL;
struct mm_struct *mm = bprm->mm;
bprm->vma = vma = vm_area_alloc(mm);
if (!vma)
return -ENOMEM;
mm: fix vma_is_anonymous() false-positives vma_is_anonymous() relies on ->vm_ops being NULL to detect anonymous VMA. This is unreliable as ->mmap may not set ->vm_ops. False-positive vma_is_anonymous() may lead to crashes: next ffff8801ce5e7040 prev ffff8801d20eca50 mm ffff88019c1e13c0 prot 27 anon_vma ffff88019680cdd8 vm_ops 0000000000000000 pgoff 0 file ffff8801b2ec2d00 private_data 0000000000000000 flags: 0xff(read|write|exec|shared|mayread|maywrite|mayexec|mayshare) ------------[ cut here ]------------ kernel BUG at mm/memory.c:1422! invalid opcode: 0000 [#1] SMP KASAN CPU: 0 PID: 18486 Comm: syz-executor3 Not tainted 4.18.0-rc3+ #136 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:zap_pmd_range mm/memory.c:1421 [inline] RIP: 0010:zap_pud_range mm/memory.c:1466 [inline] RIP: 0010:zap_p4d_range mm/memory.c:1487 [inline] RIP: 0010:unmap_page_range+0x1c18/0x2220 mm/memory.c:1508 Call Trace: unmap_single_vma+0x1a0/0x310 mm/memory.c:1553 zap_page_range_single+0x3cc/0x580 mm/memory.c:1644 unmap_mapping_range_vma mm/memory.c:2792 [inline] unmap_mapping_range_tree mm/memory.c:2813 [inline] unmap_mapping_pages+0x3a7/0x5b0 mm/memory.c:2845 unmap_mapping_range+0x48/0x60 mm/memory.c:2880 truncate_pagecache+0x54/0x90 mm/truncate.c:800 truncate_setsize+0x70/0xb0 mm/truncate.c:826 simple_setattr+0xe9/0x110 fs/libfs.c:409 notify_change+0xf13/0x10f0 fs/attr.c:335 do_truncate+0x1ac/0x2b0 fs/open.c:63 do_sys_ftruncate+0x492/0x560 fs/open.c:205 __do_sys_ftruncate fs/open.c:215 [inline] __se_sys_ftruncate fs/open.c:213 [inline] __x64_sys_ftruncate+0x59/0x80 fs/open.c:213 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Reproducer: #include <stdio.h> #include <stddef.h> #include <stdint.h> #include <stdlib.h> #include <string.h> #include <sys/types.h> #include <sys/stat.h> #include <sys/ioctl.h> #include <sys/mman.h> #include <unistd.h> #include <fcntl.h> #define KCOV_INIT_TRACE _IOR('c', 1, unsigned long) #define KCOV_ENABLE _IO('c', 100) #define KCOV_DISABLE _IO('c', 101) #define COVER_SIZE (1024<<10) #define KCOV_TRACE_PC 0 #define KCOV_TRACE_CMP 1 int main(int argc, char **argv) { int fd; unsigned long *cover; system("mount -t debugfs none /sys/kernel/debug"); fd = open("/sys/kernel/debug/kcov", O_RDWR); ioctl(fd, KCOV_INIT_TRACE, COVER_SIZE); cover = mmap(NULL, COVER_SIZE * sizeof(unsigned long), PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); munmap(cover, COVER_SIZE * sizeof(unsigned long)); cover = mmap(NULL, COVER_SIZE * sizeof(unsigned long), PROT_READ | PROT_WRITE, MAP_PRIVATE, fd, 0); memset(cover, 0, COVER_SIZE * sizeof(unsigned long)); ftruncate(fd, 3UL << 20); return 0; } This can be fixed by assigning anonymous VMAs own vm_ops and not relying on it being NULL. If ->mmap() failed to set ->vm_ops, mmap_region() will set it to dummy_vm_ops. This way we will have non-NULL ->vm_ops for all VMAs. Link: http://lkml.kernel.org/r/20180724121139.62570-4-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: syzbot+3f84280d52be9b7083cc@syzkaller.appspotmail.com Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-26 23:37:35 +00:00
vma_set_anonymous(vma);
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 04:33:25 +00:00
if (mmap_write_lock_killable(mm)) {
err = -EINTR;
goto err_free;
}
/*
* Place the stack at the largest stack address the architecture
* supports. Later, we'll move this to an appropriate place. We don't
* use STACK_TOP because that can depend on attributes which aren't
* configured yet.
*/
BUILD_BUG_ON(VM_STACK_FLAGS & VM_STACK_INCOMPLETE_SETUP);
vma->vm_end = STACK_TOP_MAX;
vma->vm_start = vma->vm_end - PAGE_SIZE;
vma->vm_flags = VM_SOFTDIRTY | VM_STACK_FLAGS | VM_STACK_INCOMPLETE_SETUP;
vma->vm_page_prot = vm_get_page_prot(vma->vm_flags);
err = insert_vm_struct(mm, vma);
if (err)
goto err;
mm->stack_vm = mm->total_vm = 1;
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 04:33:25 +00:00
mmap_write_unlock(mm);
bprm->p = vma->vm_end - sizeof(void *);
return 0;
err:
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 04:33:25 +00:00
mmap_write_unlock(mm);
err_free:
bprm->vma = NULL;
vm_area_free(vma);
return err;
}
static bool valid_arg_len(struct linux_binprm *bprm, long len)
{
return len <= MAX_ARG_STRLEN;
}
#else
static inline void acct_arg_size(struct linux_binprm *bprm, unsigned long pages)
{
}
static struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos,
int write)
{
struct page *page;
page = bprm->page[pos / PAGE_SIZE];
if (!page && write) {
page = alloc_page(GFP_HIGHUSER|__GFP_ZERO);
if (!page)
return NULL;
bprm->page[pos / PAGE_SIZE] = page;
}
return page;
}
static void put_arg_page(struct page *page)
{
}
static void free_arg_page(struct linux_binprm *bprm, int i)
{
if (bprm->page[i]) {
__free_page(bprm->page[i]);
bprm->page[i] = NULL;
}
}
static void free_arg_pages(struct linux_binprm *bprm)
{
int i;
for (i = 0; i < MAX_ARG_PAGES; i++)
free_arg_page(bprm, i);
}
static void flush_arg_page(struct linux_binprm *bprm, unsigned long pos,
struct page *page)
{
}
static int __bprm_mm_init(struct linux_binprm *bprm)
{
bprm->p = PAGE_SIZE * MAX_ARG_PAGES - sizeof(void *);
return 0;
}
static bool valid_arg_len(struct linux_binprm *bprm, long len)
{
return len <= bprm->p;
}
#endif /* CONFIG_MMU */
/*
* Create a new mm_struct and populate it with a temporary stack
* vm_area_struct. We don't have enough context at this point to set the stack
* flags, permissions, and offset, so we use temporary values. We'll update
* them later in setup_arg_pages().
*/
static int bprm_mm_init(struct linux_binprm *bprm)
{
int err;
struct mm_struct *mm = NULL;
bprm->mm = mm = mm_alloc();
err = -ENOMEM;
if (!mm)
goto err;
/* Save current stack limit for all calculations made during exec. */
task_lock(current->group_leader);
bprm->rlim_stack = current->signal->rlim[RLIMIT_STACK];
task_unlock(current->group_leader);
err = __bprm_mm_init(bprm);
if (err)
goto err;
return 0;
err:
if (mm) {
bprm->mm = NULL;
mmdrop(mm);
}
return err;
}
struct user_arg_ptr {
#ifdef CONFIG_COMPAT
bool is_compat;
#endif
union {
const char __user *const __user *native;
#ifdef CONFIG_COMPAT
const compat_uptr_t __user *compat;
#endif
} ptr;
};
static const char __user *get_user_arg_ptr(struct user_arg_ptr argv, int nr)
{
const char __user *native;
#ifdef CONFIG_COMPAT
if (unlikely(argv.is_compat)) {
compat_uptr_t compat;
if (get_user(compat, argv.ptr.compat + nr))
return ERR_PTR(-EFAULT);
return compat_ptr(compat);
}
#endif
if (get_user(native, argv.ptr.native + nr))
return ERR_PTR(-EFAULT);
return native;
}
/*
* count() counts the number of strings in array ARGV.
*/
static int count(struct user_arg_ptr argv, int max)
{
int i = 0;
if (argv.ptr.native != NULL) {
for (;;) {
const char __user *p = get_user_arg_ptr(argv, i);
if (!p)
break;
if (IS_ERR(p))
return -EFAULT;
if (i >= max)
return -E2BIG;
++i;
if (fatal_signal_pending(current))
return -ERESTARTNOHAND;
cond_resched();
}
}
return i;
}
static int count_strings_kernel(const char *const *argv)
{
int i;
if (!argv)
return 0;
for (i = 0; argv[i]; ++i) {
if (i >= MAX_ARG_STRINGS)
return -E2BIG;
if (fatal_signal_pending(current))
return -ERESTARTNOHAND;
cond_resched();
}
return i;
}
static int bprm_stack_limits(struct linux_binprm *bprm)
{
unsigned long limit, ptr_size;
/*
* Limit to 1/4 of the max stack size or 3/4 of _STK_LIM
* (whichever is smaller) for the argv+env strings.
* This ensures that:
* - the remaining binfmt code will not run out of stack space,
* - the program will have a reasonable amount of stack left
* to work from.
*/
limit = _STK_LIM / 4 * 3;
limit = min(limit, bprm->rlim_stack.rlim_cur / 4);
/*
* We've historically supported up to 32 pages (ARG_MAX)
* of argument strings even with small stacks
*/
limit = max_t(unsigned long, limit, ARG_MAX);
/*
* We must account for the size of all the argv and envp pointers to
* the argv and envp strings, since they will also take up space in
* the stack. They aren't stored until much later when we can't
* signal to the parent that the child has run out of stack space.
* Instead, calculate it here so it's possible to fail gracefully.
*/
ptr_size = (bprm->argc + bprm->envc) * sizeof(void *);
if (limit <= ptr_size)
return -E2BIG;
limit -= ptr_size;
bprm->argmin = bprm->p - limit;
return 0;
}
/*
* 'copy_strings()' copies argument/environment strings from the old
* processes's memory to the new process's stack. The call to get_user_pages()
* ensures the destination page is created and not swapped out.
*/
static int copy_strings(int argc, struct user_arg_ptr argv,
struct linux_binprm *bprm)
{
struct page *kmapped_page = NULL;
char *kaddr = NULL;
unsigned long kpos = 0;
int ret;
while (argc-- > 0) {
const char __user *str;
int len;
unsigned long pos;
ret = -EFAULT;
str = get_user_arg_ptr(argv, argc);
if (IS_ERR(str))
goto out;
len = strnlen_user(str, MAX_ARG_STRLEN);
if (!len)
goto out;
ret = -E2BIG;
if (!valid_arg_len(bprm, len))
goto out;
/* We're going to work our way backwords. */
pos = bprm->p;
str += len;
bprm->p -= len;
#ifdef CONFIG_MMU
if (bprm->p < bprm->argmin)
goto out;
#endif
while (len > 0) {
int offset, bytes_to_copy;
if (fatal_signal_pending(current)) {
ret = -ERESTARTNOHAND;
goto out;
}
cond_resched();
offset = pos % PAGE_SIZE;
if (offset == 0)
offset = PAGE_SIZE;
bytes_to_copy = offset;
if (bytes_to_copy > len)
bytes_to_copy = len;
offset -= bytes_to_copy;
pos -= bytes_to_copy;
str -= bytes_to_copy;
len -= bytes_to_copy;
if (!kmapped_page || kpos != (pos & PAGE_MASK)) {
struct page *page;
page = get_arg_page(bprm, pos, 1);
if (!page) {
ret = -E2BIG;
goto out;
}
if (kmapped_page) {
mm: remove flush_kernel_dcache_page flush_kernel_dcache_page is a rather confusing interface that implements a subset of flush_dcache_page by not being able to properly handle page cache mapped pages. The only callers left are in the exec code as all other previous callers were incorrect as they could have dealt with page cache pages. Replace the calls to flush_kernel_dcache_page with calls to flush_dcache_page, which for all architectures does either exactly the same thing, can contains one or more of the following: 1) an optimization to defer the cache flush for page cache pages not mapped into userspace 2) additional flushing for mapped page cache pages if cache aliases are possible Link: https://lkml.kernel.org/r/20210712060928.4161649-7-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Cc: Alex Shi <alexs@kernel.org> Cc: Geoff Levand <geoff@infradead.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guo Ren <guoren@kernel.org> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Yoshinori Sato <ysato@users.osdn.me> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-02 21:56:36 +00:00
flush_dcache_page(kmapped_page);
kunmap(kmapped_page);
put_arg_page(kmapped_page);
}
kmapped_page = page;
kaddr = kmap(kmapped_page);
kpos = pos & PAGE_MASK;
flush_arg_page(bprm, kpos, kmapped_page);
}
if (copy_from_user(kaddr+offset, str, bytes_to_copy)) {
ret = -EFAULT;
goto out;
}
}
}
ret = 0;
out:
if (kmapped_page) {
mm: remove flush_kernel_dcache_page flush_kernel_dcache_page is a rather confusing interface that implements a subset of flush_dcache_page by not being able to properly handle page cache mapped pages. The only callers left are in the exec code as all other previous callers were incorrect as they could have dealt with page cache pages. Replace the calls to flush_kernel_dcache_page with calls to flush_dcache_page, which for all architectures does either exactly the same thing, can contains one or more of the following: 1) an optimization to defer the cache flush for page cache pages not mapped into userspace 2) additional flushing for mapped page cache pages if cache aliases are possible Link: https://lkml.kernel.org/r/20210712060928.4161649-7-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Cc: Alex Shi <alexs@kernel.org> Cc: Geoff Levand <geoff@infradead.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guo Ren <guoren@kernel.org> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Yoshinori Sato <ysato@users.osdn.me> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-02 21:56:36 +00:00
flush_dcache_page(kmapped_page);
kunmap(kmapped_page);
put_arg_page(kmapped_page);
}
return ret;
}
/*
* Copy and argument/environment string from the kernel to the processes stack.
*/
int copy_string_kernel(const char *arg, struct linux_binprm *bprm)
{
int len = strnlen(arg, MAX_ARG_STRLEN) + 1 /* terminating NUL */;
unsigned long pos = bprm->p;
if (len == 0)
return -EFAULT;
if (!valid_arg_len(bprm, len))
return -E2BIG;
/* We're going to work our way backwards. */
arg += len;
bprm->p -= len;
if (IS_ENABLED(CONFIG_MMU) && bprm->p < bprm->argmin)
return -E2BIG;
while (len > 0) {
unsigned int bytes_to_copy = min_t(unsigned int, len,
min_not_zero(offset_in_page(pos), PAGE_SIZE));
struct page *page;
char *kaddr;
pos -= bytes_to_copy;
arg -= bytes_to_copy;
len -= bytes_to_copy;
page = get_arg_page(bprm, pos, 1);
if (!page)
return -E2BIG;
kaddr = kmap_atomic(page);
flush_arg_page(bprm, pos & PAGE_MASK, page);
memcpy(kaddr + offset_in_page(pos), arg, bytes_to_copy);
mm: remove flush_kernel_dcache_page flush_kernel_dcache_page is a rather confusing interface that implements a subset of flush_dcache_page by not being able to properly handle page cache mapped pages. The only callers left are in the exec code as all other previous callers were incorrect as they could have dealt with page cache pages. Replace the calls to flush_kernel_dcache_page with calls to flush_dcache_page, which for all architectures does either exactly the same thing, can contains one or more of the following: 1) an optimization to defer the cache flush for page cache pages not mapped into userspace 2) additional flushing for mapped page cache pages if cache aliases are possible Link: https://lkml.kernel.org/r/20210712060928.4161649-7-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Cc: Alex Shi <alexs@kernel.org> Cc: Geoff Levand <geoff@infradead.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guo Ren <guoren@kernel.org> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Yoshinori Sato <ysato@users.osdn.me> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-02 21:56:36 +00:00
flush_dcache_page(page);
kunmap_atomic(kaddr);
put_arg_page(page);
}
return 0;
}
EXPORT_SYMBOL(copy_string_kernel);
static int copy_strings_kernel(int argc, const char *const *argv,
struct linux_binprm *bprm)
{
while (argc-- > 0) {
int ret = copy_string_kernel(argv[argc], bprm);
if (ret < 0)
return ret;
if (fatal_signal_pending(current))
return -ERESTARTNOHAND;
cond_resched();
}
return 0;
}
#ifdef CONFIG_MMU
/*
* During bprm_mm_init(), we create a temporary stack at STACK_TOP_MAX. Once
* the binfmt code determines where the new stack should reside, we shift it to
* its final location. The process proceeds as follows:
*
* 1) Use shift to calculate the new vma endpoints.
* 2) Extend vma to cover both the old and new ranges. This ensures the
* arguments passed to subsequent functions are consistent.
* 3) Move vma's page tables to the new range.
* 4) Free up any cleared pgd range.
* 5) Shrink the vma to cover only the new range.
*/
static int shift_arg_pages(struct vm_area_struct *vma, unsigned long shift)
{
struct mm_struct *mm = vma->vm_mm;
unsigned long old_start = vma->vm_start;
unsigned long old_end = vma->vm_end;
unsigned long length = old_end - old_start;
unsigned long new_start = old_start - shift;
unsigned long new_end = old_end - shift;
mm: mmu_gather rework Rework the existing mmu_gather infrastructure. The direct purpose of these patches was to allow preemptible mmu_gather, but even without that I think these patches provide an improvement to the status quo. The first 9 patches rework the mmu_gather infrastructure. For review purpose I've split them into generic and per-arch patches with the last of those a generic cleanup. The next patch provides generic RCU page-table freeing, and the followup is a patch converting s390 to use this. I've also got 4 patches from DaveM lined up (not included in this series) that uses this to implement gup_fast() for sparc64. Then there is one patch that extends the generic mmu_gather batching. After that follow the mm preemptibility patches, these make part of the mm a lot more preemptible. It converts i_mmap_lock and anon_vma->lock to mutexes which together with the mmu_gather rework makes mmu_gather preemptible as well. Making i_mmap_lock a mutex also enables a clean-up of the truncate code. This also allows for preemptible mmu_notifiers, something that XPMEM I think wants. Furthermore, it removes the new and universially detested unmap_mutex. This patch: Remove the first obstacle towards a fully preemptible mmu_gather. The current scheme assumes mmu_gather is always done with preemption disabled and uses per-cpu storage for the page batches. Change this to try and allocate a page for batching and in case of failure, use a small on-stack array to make some progress. Preemptible mmu_gather is desired in general and usable once i_mmap_lock becomes a mutex. Doing it before the mutex conversion saves us from having to rework the code by moving the mmu_gather bits inside the pte_lock. Also avoid flushing the tlb batches from under the pte lock, this is useful even without the i_mmap_lock conversion as it significantly reduces pte lock hold times. [akpm@linux-foundation.org: fix comment tpyo] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Miller <davem@davemloft.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Tony Luck <tony.luck@intel.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 00:11:45 +00:00
struct mmu_gather tlb;
BUG_ON(new_start > new_end);
/*
* ensure there are no vmas between where we want to go
* and where we are
*/
if (vma != find_vma(mm, new_start))
return -EFAULT;
/*
* cover the whole range: [new_start, old_end)
*/
mm: change anon_vma linking to fix multi-process server scalability issue The old anon_vma code can lead to scalability issues with heavily forking workloads. Specifically, each anon_vma will be shared between the parent process and all its child processes. In a workload with 1000 child processes and a VMA with 1000 anonymous pages per process that get COWed, this leads to a system with a million anonymous pages in the same anon_vma, each of which is mapped in just one of the 1000 processes. However, the current rmap code needs to walk them all, leading to O(N) scanning complexity for each page. This can result in systems where one CPU is walking the page tables of 1000 processes in page_referenced_one, while all other CPUs are stuck on the anon_vma lock. This leads to catastrophic failure for a benchmark like AIM7, where the total number of processes can reach in the tens of thousands. Real workloads are still a factor 10 less process intensive than AIM7, but they are catching up. This patch changes the way anon_vmas and VMAs are linked, which allows us to associate multiple anon_vmas with a VMA. At fork time, each child process gets its own anon_vmas, in which its COWed pages will be instantiated. The parents' anon_vma is also linked to the VMA, because non-COWed pages could be present in any of the children. This reduces rmap scanning complexity to O(1) for the pages of the 1000 child processes, with O(N) complexity for at most 1/N pages in the system. This reduces the average scanning cost in heavily forking workloads from O(N) to 2. The only real complexity in this patch stems from the fact that linking a VMA to anon_vmas now involves memory allocations. This means vma_adjust can fail, if it needs to attach a VMA to anon_vma structures. This in turn means error handling needs to be added to the calling functions. A second source of complexity is that, because there can be multiple anon_vmas, the anon_vma linking in vma_adjust can no longer be done under "the" anon_vma lock. To prevent the rmap code from walking up an incomplete VMA, this patch introduces the VM_LOCK_RMAP VMA flag. This bit flag uses the same slot as the NOMMU VM_MAPPED_COPY, with an ifdef in mm.h to make sure it is impossible to compile a kernel that needs both symbolic values for the same bitflag. Some test results: Without the anon_vma changes, when AIM7 hits around 9.7k users (on a test box with 16GB RAM and not quite enough IO), the system ends up running >99% in system time, with every CPU on the same anon_vma lock in the pageout code. With these changes, AIM7 hits the cross-over point around 29.7k users. This happens with ~99% IO wait time, there never seems to be any spike in system time. The anon_vma lock contention appears to be resolved. [akpm@linux-foundation.org: cleanups] Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-05 21:42:07 +00:00
if (vma_adjust(vma, new_start, old_end, vma->vm_pgoff, NULL))
return -ENOMEM;
/*
* move the page tables downwards, on failure we rely on
* process cleanup to remove whatever mess we made.
*/
if (length != move_page_tables(vma, old_start,
vma, new_start, length, false))
return -ENOMEM;
lru_add_drain();
tlb_gather_mmu(&tlb, mm);
if (new_end > old_start) {
/*
* when the old and new regions overlap clear from new_end.
*/
mm: mmu_gather rework Rework the existing mmu_gather infrastructure. The direct purpose of these patches was to allow preemptible mmu_gather, but even without that I think these patches provide an improvement to the status quo. The first 9 patches rework the mmu_gather infrastructure. For review purpose I've split them into generic and per-arch patches with the last of those a generic cleanup. The next patch provides generic RCU page-table freeing, and the followup is a patch converting s390 to use this. I've also got 4 patches from DaveM lined up (not included in this series) that uses this to implement gup_fast() for sparc64. Then there is one patch that extends the generic mmu_gather batching. After that follow the mm preemptibility patches, these make part of the mm a lot more preemptible. It converts i_mmap_lock and anon_vma->lock to mutexes which together with the mmu_gather rework makes mmu_gather preemptible as well. Making i_mmap_lock a mutex also enables a clean-up of the truncate code. This also allows for preemptible mmu_notifiers, something that XPMEM I think wants. Furthermore, it removes the new and universially detested unmap_mutex. This patch: Remove the first obstacle towards a fully preemptible mmu_gather. The current scheme assumes mmu_gather is always done with preemption disabled and uses per-cpu storage for the page batches. Change this to try and allocate a page for batching and in case of failure, use a small on-stack array to make some progress. Preemptible mmu_gather is desired in general and usable once i_mmap_lock becomes a mutex. Doing it before the mutex conversion saves us from having to rework the code by moving the mmu_gather bits inside the pte_lock. Also avoid flushing the tlb batches from under the pte lock, this is useful even without the i_mmap_lock conversion as it significantly reduces pte lock hold times. [akpm@linux-foundation.org: fix comment tpyo] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Miller <davem@davemloft.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Tony Luck <tony.luck@intel.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 00:11:45 +00:00
free_pgd_range(&tlb, new_end, old_end, new_end,
vma->vm_next ? vma->vm_next->vm_start : USER_PGTABLES_CEILING);
} else {
/*
* otherwise, clean from old_start; this is done to not touch
* the address space in [new_end, old_start) some architectures
* have constraints on va-space that make this illegal (IA64) -
* for the others its just a little faster.
*/
mm: mmu_gather rework Rework the existing mmu_gather infrastructure. The direct purpose of these patches was to allow preemptible mmu_gather, but even without that I think these patches provide an improvement to the status quo. The first 9 patches rework the mmu_gather infrastructure. For review purpose I've split them into generic and per-arch patches with the last of those a generic cleanup. The next patch provides generic RCU page-table freeing, and the followup is a patch converting s390 to use this. I've also got 4 patches from DaveM lined up (not included in this series) that uses this to implement gup_fast() for sparc64. Then there is one patch that extends the generic mmu_gather batching. After that follow the mm preemptibility patches, these make part of the mm a lot more preemptible. It converts i_mmap_lock and anon_vma->lock to mutexes which together with the mmu_gather rework makes mmu_gather preemptible as well. Making i_mmap_lock a mutex also enables a clean-up of the truncate code. This also allows for preemptible mmu_notifiers, something that XPMEM I think wants. Furthermore, it removes the new and universially detested unmap_mutex. This patch: Remove the first obstacle towards a fully preemptible mmu_gather. The current scheme assumes mmu_gather is always done with preemption disabled and uses per-cpu storage for the page batches. Change this to try and allocate a page for batching and in case of failure, use a small on-stack array to make some progress. Preemptible mmu_gather is desired in general and usable once i_mmap_lock becomes a mutex. Doing it before the mutex conversion saves us from having to rework the code by moving the mmu_gather bits inside the pte_lock. Also avoid flushing the tlb batches from under the pte lock, this is useful even without the i_mmap_lock conversion as it significantly reduces pte lock hold times. [akpm@linux-foundation.org: fix comment tpyo] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Miller <davem@davemloft.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Tony Luck <tony.luck@intel.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 00:11:45 +00:00
free_pgd_range(&tlb, old_start, old_end, new_end,
vma->vm_next ? vma->vm_next->vm_start : USER_PGTABLES_CEILING);
}
tlb_finish_mmu(&tlb);
/*
mm: change anon_vma linking to fix multi-process server scalability issue The old anon_vma code can lead to scalability issues with heavily forking workloads. Specifically, each anon_vma will be shared between the parent process and all its child processes. In a workload with 1000 child processes and a VMA with 1000 anonymous pages per process that get COWed, this leads to a system with a million anonymous pages in the same anon_vma, each of which is mapped in just one of the 1000 processes. However, the current rmap code needs to walk them all, leading to O(N) scanning complexity for each page. This can result in systems where one CPU is walking the page tables of 1000 processes in page_referenced_one, while all other CPUs are stuck on the anon_vma lock. This leads to catastrophic failure for a benchmark like AIM7, where the total number of processes can reach in the tens of thousands. Real workloads are still a factor 10 less process intensive than AIM7, but they are catching up. This patch changes the way anon_vmas and VMAs are linked, which allows us to associate multiple anon_vmas with a VMA. At fork time, each child process gets its own anon_vmas, in which its COWed pages will be instantiated. The parents' anon_vma is also linked to the VMA, because non-COWed pages could be present in any of the children. This reduces rmap scanning complexity to O(1) for the pages of the 1000 child processes, with O(N) complexity for at most 1/N pages in the system. This reduces the average scanning cost in heavily forking workloads from O(N) to 2. The only real complexity in this patch stems from the fact that linking a VMA to anon_vmas now involves memory allocations. This means vma_adjust can fail, if it needs to attach a VMA to anon_vma structures. This in turn means error handling needs to be added to the calling functions. A second source of complexity is that, because there can be multiple anon_vmas, the anon_vma linking in vma_adjust can no longer be done under "the" anon_vma lock. To prevent the rmap code from walking up an incomplete VMA, this patch introduces the VM_LOCK_RMAP VMA flag. This bit flag uses the same slot as the NOMMU VM_MAPPED_COPY, with an ifdef in mm.h to make sure it is impossible to compile a kernel that needs both symbolic values for the same bitflag. Some test results: Without the anon_vma changes, when AIM7 hits around 9.7k users (on a test box with 16GB RAM and not quite enough IO), the system ends up running >99% in system time, with every CPU on the same anon_vma lock in the pageout code. With these changes, AIM7 hits the cross-over point around 29.7k users. This happens with ~99% IO wait time, there never seems to be any spike in system time. The anon_vma lock contention appears to be resolved. [akpm@linux-foundation.org: cleanups] Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-05 21:42:07 +00:00
* Shrink the vma to just the new range. Always succeeds.
*/
vma_adjust(vma, new_start, new_end, vma->vm_pgoff, NULL);
return 0;
}
/*
* Finalizes the stack vm_area_struct. The flags and permissions are updated,
* the stack is optionally relocated, and some extra space is added.
*/
int setup_arg_pages(struct linux_binprm *bprm,
unsigned long stack_top,
int executable_stack)
{
unsigned long ret;
unsigned long stack_shift;
struct mm_struct *mm = current->mm;
struct vm_area_struct *vma = bprm->vma;
struct vm_area_struct *prev = NULL;
unsigned long vm_flags;
unsigned long stack_base;
fs/exec.c: restrict initial stack space expansion to rlimit When reserving stack space for a new process, make sure we're not attempting to expand the stack by more than rlimit allows. This fixes a bug caused by b6a2fea39318e43fee84fa7b0b90d68bed92d2ba ("mm: variable length argument support") and unmasked by fc63cf237078c86214abcb2ee9926d8ad289da9b ("exec: setup_arg_pages() fails to return errors"). This bug means that when limiting the stack to less the 20*PAGE_SIZE (eg. 80K on 4K pages or 'ulimit -s 79') all processes will be killed before they start. This is particularly bad with 64K pages, where a ulimit below 1280K will kill every process. To test, do: 'ulimit -s 15; ls' before and after the patch is applied. Before it's applied, 'ls' should be killed. After the patch is applied, 'ls' should no longer be killed. A stack limit of 15KB since it's small enough to trigger 20*PAGE_SIZE. Also 15KB not a multiple of PAGE_SIZE, which is a trickier case to handle correctly with this code. 4K pages should be fine to test with. [kosaki.motohiro@jp.fujitsu.com: cleanup] [akpm@linux-foundation.org: cleanup cleanup] Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Americo Wang <xiyou.wangcong@gmail.com> Cc: Anton Blanchard <anton@samba.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: James Morris <jmorris@namei.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-02-10 21:56:42 +00:00
unsigned long stack_size;
unsigned long stack_expand;
unsigned long rlim_stack;
#ifdef CONFIG_STACK_GROWSUP
/* Limit stack size */
stack_base = bprm->rlim_stack.rlim_max;
stack_base = calc_max_stack_size(stack_base);
parisc,metag: Fix crashes due to stack randomization on stack-grows-upwards architectures On architectures where the stack grows upwards (CONFIG_STACK_GROWSUP=y, currently parisc and metag only) stack randomization sometimes leads to crashes when the stack ulimit is set to lower values than STACK_RND_MASK (which is 8 MB by default if not defined in arch-specific headers). The problem is, that when the stack vm_area_struct is set up in fs/exec.c, the additional space needed for the stack randomization (as defined by the value of STACK_RND_MASK) was not taken into account yet and as such, when the stack randomization code added a random offset to the stack start, the stack effectively got smaller than what the user defined via rlimit_max(RLIMIT_STACK) which then sometimes leads to out-of-stack situations and crashes. This patch fixes it by adding the maximum possible amount of memory (based on STACK_RND_MASK) which theoretically could be added by the stack randomization code to the initial stack size. That way, the user-defined stack size is always guaranteed to be at minimum what is defined via rlimit_max(RLIMIT_STACK). This bug is currently not visible on the metag architecture, because on metag STACK_RND_MASK is defined to 0 which effectively disables stack randomization. The changes to fs/exec.c are inside an "#ifdef CONFIG_STACK_GROWSUP" section, so it does not affect other platformws beside those where the stack grows upwards (parisc and metag). Signed-off-by: Helge Deller <deller@gmx.de> Cc: linux-parisc@vger.kernel.org Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-metag@vger.kernel.org Cc: stable@vger.kernel.org # v3.16+
2015-05-11 20:01:27 +00:00
/* Add space for stack randomization. */
stack_base += (STACK_RND_MASK << PAGE_SHIFT);
/* Make sure we didn't let the argument array grow too large. */
if (vma->vm_end - vma->vm_start > stack_base)
return -ENOMEM;
stack_base = PAGE_ALIGN(stack_top - stack_base);
stack_shift = vma->vm_start - stack_base;
mm->arg_start = bprm->p - stack_shift;
bprm->p = vma->vm_end - stack_shift;
#else
stack_top = arch_align_stack(stack_top);
stack_top = PAGE_ALIGN(stack_top);
if (unlikely(stack_top < mmap_min_addr) ||
unlikely(vma->vm_end - vma->vm_start >= stack_top - mmap_min_addr))
return -ENOMEM;
stack_shift = vma->vm_end - stack_top;
bprm->p -= stack_shift;
mm->arg_start = bprm->p;
#endif
if (bprm->loader)
bprm->loader -= stack_shift;
bprm->exec -= stack_shift;
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 04:33:25 +00:00
if (mmap_write_lock_killable(mm))
return -EINTR;
vm_flags = VM_STACK_FLAGS;
/*
* Adjust stack execute permissions; explicitly enable for
* EXSTACK_ENABLE_X, disable for EXSTACK_DISABLE_X and leave alone
* (arch default) otherwise.
*/
if (unlikely(executable_stack == EXSTACK_ENABLE_X))
vm_flags |= VM_EXEC;
else if (executable_stack == EXSTACK_DISABLE_X)
vm_flags &= ~VM_EXEC;
vm_flags |= mm->def_flags;
mm: migration: avoid race between shift_arg_pages() and rmap_walk() during migration by not migrating temporary stacks Page migration requires rmap to be able to find all ptes mapping a page at all times, otherwise the migration entry can be instantiated, but it is possible to leave one behind if the second rmap_walk fails to find the page. If this page is later faulted, migration_entry_to_page() will call BUG because the page is locked indicating the page was migrated by the migration PTE not cleaned up. For example kernel BUG at include/linux/swapops.h:105! invalid opcode: 0000 [#1] PREEMPT SMP ... Call Trace: [<ffffffff810e951a>] handle_mm_fault+0x3f8/0x76a [<ffffffff8130c7a2>] do_page_fault+0x44a/0x46e [<ffffffff813099b5>] page_fault+0x25/0x30 [<ffffffff8114de33>] load_elf_binary+0x152a/0x192b [<ffffffff8111329b>] search_binary_handler+0x173/0x313 [<ffffffff81114896>] do_execve+0x219/0x30a [<ffffffff8100a5c6>] sys_execve+0x43/0x5e [<ffffffff8100320a>] stub_execve+0x6a/0xc0 RIP [<ffffffff811094ff>] migration_entry_wait+0xc1/0x129 There is a race between shift_arg_pages and migration that triggers this bug. A temporary stack is setup during exec and later moved. If migration moves a page in the temporary stack and the VMA is then removed before migration completes, the migration PTE may not be found leading to a BUG when the stack is faulted. This patch causes pages within the temporary stack during exec to be skipped by migration. It does this by marking the VMA covering the temporary stack with an otherwise impossible combination of VMA flags. These flags are cleared when the temporary stack is moved to its final location. [kamezawa.hiroyu@jp.fujitsu.com: idea for having migration skip temporary stacks] Signed-off-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-24 21:32:24 +00:00
vm_flags |= VM_STACK_INCOMPLETE_SETUP;
ret = mprotect_fixup(vma, &prev, vma->vm_start, vma->vm_end,
vm_flags);
if (ret)
goto out_unlock;
BUG_ON(prev != vma);
if (unlikely(vm_flags & VM_EXEC)) {
pr_warn_once("process '%pD4' started with executable stack\n",
bprm->file);
}
/* Move stack pages down in memory. */
if (stack_shift) {
ret = shift_arg_pages(vma, stack_shift);
if (ret)
goto out_unlock;
}
mm: migration: avoid race between shift_arg_pages() and rmap_walk() during migration by not migrating temporary stacks Page migration requires rmap to be able to find all ptes mapping a page at all times, otherwise the migration entry can be instantiated, but it is possible to leave one behind if the second rmap_walk fails to find the page. If this page is later faulted, migration_entry_to_page() will call BUG because the page is locked indicating the page was migrated by the migration PTE not cleaned up. For example kernel BUG at include/linux/swapops.h:105! invalid opcode: 0000 [#1] PREEMPT SMP ... Call Trace: [<ffffffff810e951a>] handle_mm_fault+0x3f8/0x76a [<ffffffff8130c7a2>] do_page_fault+0x44a/0x46e [<ffffffff813099b5>] page_fault+0x25/0x30 [<ffffffff8114de33>] load_elf_binary+0x152a/0x192b [<ffffffff8111329b>] search_binary_handler+0x173/0x313 [<ffffffff81114896>] do_execve+0x219/0x30a [<ffffffff8100a5c6>] sys_execve+0x43/0x5e [<ffffffff8100320a>] stub_execve+0x6a/0xc0 RIP [<ffffffff811094ff>] migration_entry_wait+0xc1/0x129 There is a race between shift_arg_pages and migration that triggers this bug. A temporary stack is setup during exec and later moved. If migration moves a page in the temporary stack and the VMA is then removed before migration completes, the migration PTE may not be found leading to a BUG when the stack is faulted. This patch causes pages within the temporary stack during exec to be skipped by migration. It does this by marking the VMA covering the temporary stack with an otherwise impossible combination of VMA flags. These flags are cleared when the temporary stack is moved to its final location. [kamezawa.hiroyu@jp.fujitsu.com: idea for having migration skip temporary stacks] Signed-off-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-24 21:32:24 +00:00
/* mprotect_fixup is overkill to remove the temporary stack flags */
vma->vm_flags &= ~VM_STACK_INCOMPLETE_SETUP;
stack_expand = 131072UL; /* randomly 32*4k (or 2*64k) pages */
fs/exec.c: restrict initial stack space expansion to rlimit When reserving stack space for a new process, make sure we're not attempting to expand the stack by more than rlimit allows. This fixes a bug caused by b6a2fea39318e43fee84fa7b0b90d68bed92d2ba ("mm: variable length argument support") and unmasked by fc63cf237078c86214abcb2ee9926d8ad289da9b ("exec: setup_arg_pages() fails to return errors"). This bug means that when limiting the stack to less the 20*PAGE_SIZE (eg. 80K on 4K pages or 'ulimit -s 79') all processes will be killed before they start. This is particularly bad with 64K pages, where a ulimit below 1280K will kill every process. To test, do: 'ulimit -s 15; ls' before and after the patch is applied. Before it's applied, 'ls' should be killed. After the patch is applied, 'ls' should no longer be killed. A stack limit of 15KB since it's small enough to trigger 20*PAGE_SIZE. Also 15KB not a multiple of PAGE_SIZE, which is a trickier case to handle correctly with this code. 4K pages should be fine to test with. [kosaki.motohiro@jp.fujitsu.com: cleanup] [akpm@linux-foundation.org: cleanup cleanup] Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Americo Wang <xiyou.wangcong@gmail.com> Cc: Anton Blanchard <anton@samba.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: James Morris <jmorris@namei.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-02-10 21:56:42 +00:00
stack_size = vma->vm_end - vma->vm_start;
/*
* Align this down to a page boundary as expand_stack
* will align it up.
*/
rlim_stack = bprm->rlim_stack.rlim_cur & PAGE_MASK;
#ifdef CONFIG_STACK_GROWSUP
fs/exec.c: restrict initial stack space expansion to rlimit When reserving stack space for a new process, make sure we're not attempting to expand the stack by more than rlimit allows. This fixes a bug caused by b6a2fea39318e43fee84fa7b0b90d68bed92d2ba ("mm: variable length argument support") and unmasked by fc63cf237078c86214abcb2ee9926d8ad289da9b ("exec: setup_arg_pages() fails to return errors"). This bug means that when limiting the stack to less the 20*PAGE_SIZE (eg. 80K on 4K pages or 'ulimit -s 79') all processes will be killed before they start. This is particularly bad with 64K pages, where a ulimit below 1280K will kill every process. To test, do: 'ulimit -s 15; ls' before and after the patch is applied. Before it's applied, 'ls' should be killed. After the patch is applied, 'ls' should no longer be killed. A stack limit of 15KB since it's small enough to trigger 20*PAGE_SIZE. Also 15KB not a multiple of PAGE_SIZE, which is a trickier case to handle correctly with this code. 4K pages should be fine to test with. [kosaki.motohiro@jp.fujitsu.com: cleanup] [akpm@linux-foundation.org: cleanup cleanup] Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Americo Wang <xiyou.wangcong@gmail.com> Cc: Anton Blanchard <anton@samba.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: James Morris <jmorris@namei.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-02-10 21:56:42 +00:00
if (stack_size + stack_expand > rlim_stack)
stack_base = vma->vm_start + rlim_stack;
else
stack_base = vma->vm_end + stack_expand;
#else
fs/exec.c: restrict initial stack space expansion to rlimit When reserving stack space for a new process, make sure we're not attempting to expand the stack by more than rlimit allows. This fixes a bug caused by b6a2fea39318e43fee84fa7b0b90d68bed92d2ba ("mm: variable length argument support") and unmasked by fc63cf237078c86214abcb2ee9926d8ad289da9b ("exec: setup_arg_pages() fails to return errors"). This bug means that when limiting the stack to less the 20*PAGE_SIZE (eg. 80K on 4K pages or 'ulimit -s 79') all processes will be killed before they start. This is particularly bad with 64K pages, where a ulimit below 1280K will kill every process. To test, do: 'ulimit -s 15; ls' before and after the patch is applied. Before it's applied, 'ls' should be killed. After the patch is applied, 'ls' should no longer be killed. A stack limit of 15KB since it's small enough to trigger 20*PAGE_SIZE. Also 15KB not a multiple of PAGE_SIZE, which is a trickier case to handle correctly with this code. 4K pages should be fine to test with. [kosaki.motohiro@jp.fujitsu.com: cleanup] [akpm@linux-foundation.org: cleanup cleanup] Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Americo Wang <xiyou.wangcong@gmail.com> Cc: Anton Blanchard <anton@samba.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: James Morris <jmorris@namei.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-02-10 21:56:42 +00:00
if (stack_size + stack_expand > rlim_stack)
stack_base = vma->vm_end - rlim_stack;
else
stack_base = vma->vm_start - stack_expand;
#endif
current->mm->start_stack = bprm->p;
ret = expand_stack(vma, stack_base);
if (ret)
ret = -EFAULT;
out_unlock:
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 04:33:25 +00:00
mmap_write_unlock(mm);
return ret;
}
EXPORT_SYMBOL(setup_arg_pages);
#else
/*
* Transfer the program arguments and environment from the holding pages
* onto the stack. The provided stack pointer is adjusted accordingly.
*/
int transfer_args_to_stack(struct linux_binprm *bprm,
unsigned long *sp_location)
{
unsigned long index, stop, sp;
int ret = 0;
stop = bprm->p >> PAGE_SHIFT;
sp = *sp_location;
for (index = MAX_ARG_PAGES - 1; index >= stop; index--) {
unsigned int offset = index == stop ? bprm->p & ~PAGE_MASK : 0;
char *src = kmap(bprm->page[index]) + offset;
sp -= PAGE_SIZE - offset;
if (copy_to_user((void *) sp, src, PAGE_SIZE - offset) != 0)
ret = -EFAULT;
kunmap(bprm->page[index]);
if (ret)
goto out;
}
*sp_location = sp;
out:
return ret;
}
EXPORT_SYMBOL(transfer_args_to_stack);
#endif /* CONFIG_MMU */
syscalls: implement execveat() system call This patchset adds execveat(2) for x86, and is derived from Meredydd Luff's patch from Sept 2012 (https://lkml.org/lkml/2012/9/11/528). The primary aim of adding an execveat syscall is to allow an implementation of fexecve(3) that does not rely on the /proc filesystem, at least for executables (rather than scripts). The current glibc version of fexecve(3) is implemented via /proc, which causes problems in sandboxed or otherwise restricted environments. Given the desire for a /proc-free fexecve() implementation, HPA suggested (https://lkml.org/lkml/2006/7/11/556) that an execveat(2) syscall would be an appropriate generalization. Also, having a new syscall means that it can take a flags argument without back-compatibility concerns. The current implementation just defines the AT_EMPTY_PATH and AT_SYMLINK_NOFOLLOW flags, but other flags could be added in future -- for example, flags for new namespaces (as suggested at https://lkml.org/lkml/2006/7/11/474). Related history: - https://lkml.org/lkml/2006/12/27/123 is an example of someone realizing that fexecve() is likely to fail in a chroot environment. - http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=514043 covered documenting the /proc requirement of fexecve(3) in its manpage, to "prevent other people from wasting their time". - https://bugzilla.redhat.com/show_bug.cgi?id=241609 described a problem where a process that did setuid() could not fexecve() because it no longer had access to /proc/self/fd; this has since been fixed. This patch (of 4): Add a new execveat(2) system call. execveat() is to execve() as openat() is to open(): it takes a file descriptor that refers to a directory, and resolves the filename relative to that. In addition, if the filename is empty and AT_EMPTY_PATH is specified, execveat() executes the file to which the file descriptor refers. This replicates the functionality of fexecve(), which is a system call in other UNIXen, but in Linux glibc it depends on opening "/proc/self/fd/<fd>" (and so relies on /proc being mounted). The filename fed to the executed program as argv[0] (or the name of the script fed to a script interpreter) will be of the form "/dev/fd/<fd>" (for an empty filename) or "/dev/fd/<fd>/<filename>", effectively reflecting how the executable was found. This does however mean that execution of a script in a /proc-less environment won't work; also, script execution via an O_CLOEXEC file descriptor fails (as the file will not be accessible after exec). Based on patches by Meredydd Luff. Signed-off-by: David Drysdale <drysdale@google.com> Cc: Meredydd Luff <meredydd@senatehouse.org> Cc: Shuah Khan <shuah.kh@samsung.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rich Felker <dalias@aerifal.cx> Cc: Christoph Hellwig <hch@infradead.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:57:29 +00:00
static struct file *do_open_execat(int fd, struct filename *name, int flags)
{
struct file *file;
int err;
syscalls: implement execveat() system call This patchset adds execveat(2) for x86, and is derived from Meredydd Luff's patch from Sept 2012 (https://lkml.org/lkml/2012/9/11/528). The primary aim of adding an execveat syscall is to allow an implementation of fexecve(3) that does not rely on the /proc filesystem, at least for executables (rather than scripts). The current glibc version of fexecve(3) is implemented via /proc, which causes problems in sandboxed or otherwise restricted environments. Given the desire for a /proc-free fexecve() implementation, HPA suggested (https://lkml.org/lkml/2006/7/11/556) that an execveat(2) syscall would be an appropriate generalization. Also, having a new syscall means that it can take a flags argument without back-compatibility concerns. The current implementation just defines the AT_EMPTY_PATH and AT_SYMLINK_NOFOLLOW flags, but other flags could be added in future -- for example, flags for new namespaces (as suggested at https://lkml.org/lkml/2006/7/11/474). Related history: - https://lkml.org/lkml/2006/12/27/123 is an example of someone realizing that fexecve() is likely to fail in a chroot environment. - http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=514043 covered documenting the /proc requirement of fexecve(3) in its manpage, to "prevent other people from wasting their time". - https://bugzilla.redhat.com/show_bug.cgi?id=241609 described a problem where a process that did setuid() could not fexecve() because it no longer had access to /proc/self/fd; this has since been fixed. This patch (of 4): Add a new execveat(2) system call. execveat() is to execve() as openat() is to open(): it takes a file descriptor that refers to a directory, and resolves the filename relative to that. In addition, if the filename is empty and AT_EMPTY_PATH is specified, execveat() executes the file to which the file descriptor refers. This replicates the functionality of fexecve(), which is a system call in other UNIXen, but in Linux glibc it depends on opening "/proc/self/fd/<fd>" (and so relies on /proc being mounted). The filename fed to the executed program as argv[0] (or the name of the script fed to a script interpreter) will be of the form "/dev/fd/<fd>" (for an empty filename) or "/dev/fd/<fd>/<filename>", effectively reflecting how the executable was found. This does however mean that execution of a script in a /proc-less environment won't work; also, script execution via an O_CLOEXEC file descriptor fails (as the file will not be accessible after exec). Based on patches by Meredydd Luff. Signed-off-by: David Drysdale <drysdale@google.com> Cc: Meredydd Luff <meredydd@senatehouse.org> Cc: Shuah Khan <shuah.kh@samsung.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rich Felker <dalias@aerifal.cx> Cc: Christoph Hellwig <hch@infradead.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:57:29 +00:00
struct open_flags open_exec_flags = {
.open_flag = O_LARGEFILE | O_RDONLY | __FMODE_EXEC,
.acc_mode = MAY_EXEC,
.intent = LOOKUP_OPEN,
.lookup_flags = LOOKUP_FOLLOW,
};
syscalls: implement execveat() system call This patchset adds execveat(2) for x86, and is derived from Meredydd Luff's patch from Sept 2012 (https://lkml.org/lkml/2012/9/11/528). The primary aim of adding an execveat syscall is to allow an implementation of fexecve(3) that does not rely on the /proc filesystem, at least for executables (rather than scripts). The current glibc version of fexecve(3) is implemented via /proc, which causes problems in sandboxed or otherwise restricted environments. Given the desire for a /proc-free fexecve() implementation, HPA suggested (https://lkml.org/lkml/2006/7/11/556) that an execveat(2) syscall would be an appropriate generalization. Also, having a new syscall means that it can take a flags argument without back-compatibility concerns. The current implementation just defines the AT_EMPTY_PATH and AT_SYMLINK_NOFOLLOW flags, but other flags could be added in future -- for example, flags for new namespaces (as suggested at https://lkml.org/lkml/2006/7/11/474). Related history: - https://lkml.org/lkml/2006/12/27/123 is an example of someone realizing that fexecve() is likely to fail in a chroot environment. - http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=514043 covered documenting the /proc requirement of fexecve(3) in its manpage, to "prevent other people from wasting their time". - https://bugzilla.redhat.com/show_bug.cgi?id=241609 described a problem where a process that did setuid() could not fexecve() because it no longer had access to /proc/self/fd; this has since been fixed. This patch (of 4): Add a new execveat(2) system call. execveat() is to execve() as openat() is to open(): it takes a file descriptor that refers to a directory, and resolves the filename relative to that. In addition, if the filename is empty and AT_EMPTY_PATH is specified, execveat() executes the file to which the file descriptor refers. This replicates the functionality of fexecve(), which is a system call in other UNIXen, but in Linux glibc it depends on opening "/proc/self/fd/<fd>" (and so relies on /proc being mounted). The filename fed to the executed program as argv[0] (or the name of the script fed to a script interpreter) will be of the form "/dev/fd/<fd>" (for an empty filename) or "/dev/fd/<fd>/<filename>", effectively reflecting how the executable was found. This does however mean that execution of a script in a /proc-less environment won't work; also, script execution via an O_CLOEXEC file descriptor fails (as the file will not be accessible after exec). Based on patches by Meredydd Luff. Signed-off-by: David Drysdale <drysdale@google.com> Cc: Meredydd Luff <meredydd@senatehouse.org> Cc: Shuah Khan <shuah.kh@samsung.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rich Felker <dalias@aerifal.cx> Cc: Christoph Hellwig <hch@infradead.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:57:29 +00:00
if ((flags & ~(AT_SYMLINK_NOFOLLOW | AT_EMPTY_PATH)) != 0)
return ERR_PTR(-EINVAL);
if (flags & AT_SYMLINK_NOFOLLOW)
open_exec_flags.lookup_flags &= ~LOOKUP_FOLLOW;
if (flags & AT_EMPTY_PATH)
open_exec_flags.lookup_flags |= LOOKUP_EMPTY;
file = do_filp_open(fd, name, &open_exec_flags);
if (IS_ERR(file))
goto out;
exec: move S_ISREG() check earlier The execve(2)/uselib(2) syscalls have always rejected non-regular files. Recently, it was noticed that a deadlock was introduced when trying to execute pipes, as the S_ISREG() test was happening too late. This was fixed in commit 73601ea5b7b1 ("fs/open.c: allow opening only regular files during execve()"), but it was added after inode_permission() had already run, which meant LSMs could see bogus attempts to execute non-regular files. Move the test into the other inode type checks (which already look for other pathological conditions[1]). Since there is no need to use FMODE_EXEC while we still have access to "acc_mode", also switch the test to MAY_EXEC. Also include a comment with the redundant S_ISREG() checks at the end of execve(2)/uselib(2) to note that they are present to avoid any mistakes. My notes on the call path, and related arguments, checks, etc: do_open_execat() struct open_flags open_exec_flags = { .open_flag = O_LARGEFILE | O_RDONLY | __FMODE_EXEC, .acc_mode = MAY_EXEC, ... do_filp_open(dfd, filename, open_flags) path_openat(nameidata, open_flags, flags) file = alloc_empty_file(open_flags, current_cred()); do_open(nameidata, file, open_flags) may_open(path, acc_mode, open_flag) /* new location of MAY_EXEC vs S_ISREG() test */ inode_permission(inode, MAY_OPEN | acc_mode) security_inode_permission(inode, acc_mode) vfs_open(path, file) do_dentry_open(file, path->dentry->d_inode, open) /* old location of FMODE_EXEC vs S_ISREG() test */ security_file_open(f) open() [1] https://lore.kernel.org/lkml/202006041910.9EF0C602@keescook/ Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Eric Biggers <ebiggers3@gmail.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Link: http://lkml.kernel.org/r/20200605160013.3954297-3-keescook@chromium.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 01:36:26 +00:00
/*
* may_open() has already checked for this, so it should be
* impossible to trip now. But we need to be extra cautious
* and check again at the very end too.
*/
err = -EACCES;
exec: move path_noexec() check earlier The path_noexec() check, like the regular file check, was happening too late, letting LSMs see impossible execve()s. Check it earlier as well in may_open() and collect the redundant fs/exec.c path_noexec() test under the same robustness comment as the S_ISREG() check. My notes on the call path, and related arguments, checks, etc: do_open_execat() struct open_flags open_exec_flags = { .open_flag = O_LARGEFILE | O_RDONLY | __FMODE_EXEC, .acc_mode = MAY_EXEC, ... do_filp_open(dfd, filename, open_flags) path_openat(nameidata, open_flags, flags) file = alloc_empty_file(open_flags, current_cred()); do_open(nameidata, file, open_flags) may_open(path, acc_mode, open_flag) /* new location of MAY_EXEC vs path_noexec() test */ inode_permission(inode, MAY_OPEN | acc_mode) security_inode_permission(inode, acc_mode) vfs_open(path, file) do_dentry_open(file, path->dentry->d_inode, open) security_file_open(f) open() /* old location of path_noexec() test */ Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Eric Biggers <ebiggers3@gmail.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Link: http://lkml.kernel.org/r/20200605160013.3954297-4-keescook@chromium.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 01:36:30 +00:00
if (WARN_ON_ONCE(!S_ISREG(file_inode(file)->i_mode) ||
path_noexec(&file->f_path)))
goto exit;
err = deny_write_access(file);
if (err)
goto exit;
syscalls: implement execveat() system call This patchset adds execveat(2) for x86, and is derived from Meredydd Luff's patch from Sept 2012 (https://lkml.org/lkml/2012/9/11/528). The primary aim of adding an execveat syscall is to allow an implementation of fexecve(3) that does not rely on the /proc filesystem, at least for executables (rather than scripts). The current glibc version of fexecve(3) is implemented via /proc, which causes problems in sandboxed or otherwise restricted environments. Given the desire for a /proc-free fexecve() implementation, HPA suggested (https://lkml.org/lkml/2006/7/11/556) that an execveat(2) syscall would be an appropriate generalization. Also, having a new syscall means that it can take a flags argument without back-compatibility concerns. The current implementation just defines the AT_EMPTY_PATH and AT_SYMLINK_NOFOLLOW flags, but other flags could be added in future -- for example, flags for new namespaces (as suggested at https://lkml.org/lkml/2006/7/11/474). Related history: - https://lkml.org/lkml/2006/12/27/123 is an example of someone realizing that fexecve() is likely to fail in a chroot environment. - http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=514043 covered documenting the /proc requirement of fexecve(3) in its manpage, to "prevent other people from wasting their time". - https://bugzilla.redhat.com/show_bug.cgi?id=241609 described a problem where a process that did setuid() could not fexecve() because it no longer had access to /proc/self/fd; this has since been fixed. This patch (of 4): Add a new execveat(2) system call. execveat() is to execve() as openat() is to open(): it takes a file descriptor that refers to a directory, and resolves the filename relative to that. In addition, if the filename is empty and AT_EMPTY_PATH is specified, execveat() executes the file to which the file descriptor refers. This replicates the functionality of fexecve(), which is a system call in other UNIXen, but in Linux glibc it depends on opening "/proc/self/fd/<fd>" (and so relies on /proc being mounted). The filename fed to the executed program as argv[0] (or the name of the script fed to a script interpreter) will be of the form "/dev/fd/<fd>" (for an empty filename) or "/dev/fd/<fd>/<filename>", effectively reflecting how the executable was found. This does however mean that execution of a script in a /proc-less environment won't work; also, script execution via an O_CLOEXEC file descriptor fails (as the file will not be accessible after exec). Based on patches by Meredydd Luff. Signed-off-by: David Drysdale <drysdale@google.com> Cc: Meredydd Luff <meredydd@senatehouse.org> Cc: Shuah Khan <shuah.kh@samsung.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rich Felker <dalias@aerifal.cx> Cc: Christoph Hellwig <hch@infradead.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:57:29 +00:00
if (name->name[0] != '\0')
fsnotify_open(file);
out:
return file;
exit:
fput(file);
return ERR_PTR(err);
}
struct file *open_exec(const char *name)
{
struct filename *filename = getname_kernel(name);
struct file *f = ERR_CAST(filename);
if (!IS_ERR(filename)) {
f = do_open_execat(AT_FDCWD, filename, 0);
putname(filename);
}
return f;
}
EXPORT_SYMBOL(open_exec);
#if defined(CONFIG_HAVE_AOUT) || defined(CONFIG_BINFMT_FLAT) || \
defined(CONFIG_BINFMT_ELF_FDPIC)
ssize_t read_code(struct file *file, unsigned long addr, loff_t pos, size_t len)
{
ssize_t res = vfs_read(file, (void __user *)addr, len, &pos);
if (res > 0)
flush_icache_user_range(addr, addr + len);
return res;
}
EXPORT_SYMBOL(read_code);
#endif
exec: Add exec_update_mutex to replace cred_guard_mutex The cred_guard_mutex is problematic as it is held over possibly indefinite waits for userspace. The possible indefinite waits for userspace that I have identified are: The cred_guard_mutex is held in PTRACE_EVENT_EXIT waiting for the tracer. The cred_guard_mutex is held over "put_user(0, tsk->clear_child_tid)" in exit_mm(). The cred_guard_mutex is held over "get_user(futex_offset, ...") in exit_robust_list. The cred_guard_mutex held over copy_strings. The functions get_user and put_user can trigger a page fault which can potentially wait indefinitely in the case of userfaultfd or if userspace implements part of the page fault path. In any of those cases the userspace process that the kernel is waiting for might make a different system call that winds up taking the cred_guard_mutex and result in deadlock. Holding a mutex over any of those possibly indefinite waits for userspace does not appear necessary. Add exec_update_mutex that will just cover updating the process during exec where the permissions and the objects pointed to by the task struct may be out of sync. The plan is to switch the users of cred_guard_mutex to exec_update_mutex one by one. This lets us move forward while still being careful and not introducing any regressions. Link: https://lore.kernel.org/lkml/20160921152946.GA24210@dhcp22.suse.cz/ Link: https://lore.kernel.org/lkml/AM6PR03MB5170B06F3A2B75EFB98D071AE4E60@AM6PR03MB5170.eurprd03.prod.outlook.com/ Link: https://lore.kernel.org/linux-fsdevel/20161102181806.GB1112@redhat.com/ Link: https://lore.kernel.org/lkml/20160923095031.GA14923@redhat.com/ Link: https://lore.kernel.org/lkml/20170213141452.GA30203@redhat.com/ Ref: 45c1a159b85b ("Add PTRACE_O_TRACEVFORKDONE and PTRACE_O_TRACEEXIT facilities.") Ref: 456f17cd1a28 ("[PATCH] user-vm-unlock-2.5.31-A2") Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2020-03-25 15:03:36 +00:00
/*
* Maps the mm_struct mm into the current task struct.
exec: Transform exec_update_mutex into a rw_semaphore Recently syzbot reported[0] that there is a deadlock amongst the users of exec_update_mutex. The problematic lock ordering found by lockdep was: perf_event_open (exec_update_mutex -> ovl_i_mutex) chown (ovl_i_mutex -> sb_writes) sendfile (sb_writes -> p->lock) by reading from a proc file and writing to overlayfs proc_pid_syscall (p->lock -> exec_update_mutex) While looking at possible solutions it occured to me that all of the users and possible users involved only wanted to state of the given process to remain the same. They are all readers. The only writer is exec. There is no reason for readers to block on each other. So fix this deadlock by transforming exec_update_mutex into a rw_semaphore named exec_update_lock that only exec takes for writing. Cc: Jann Horn <jannh@google.com> Cc: Vasiliy Kulikov <segoon@openwall.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Bernd Edlinger <bernd.edlinger@hotmail.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Christopher Yeoh <cyeoh@au1.ibm.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Fixes: eea9673250db ("exec: Add exec_update_mutex to replace cred_guard_mutex") [0] https://lkml.kernel.org/r/00000000000063640c05ade8e3de@google.com Reported-by: syzbot+db9cdf3dd1f64252c6ef@syzkaller.appspotmail.com Link: https://lkml.kernel.org/r/87ft4mbqen.fsf@x220.int.ebiederm.org Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2020-12-03 20:12:00 +00:00
* On success, this function returns with exec_update_lock
* held for writing.
exec: Add exec_update_mutex to replace cred_guard_mutex The cred_guard_mutex is problematic as it is held over possibly indefinite waits for userspace. The possible indefinite waits for userspace that I have identified are: The cred_guard_mutex is held in PTRACE_EVENT_EXIT waiting for the tracer. The cred_guard_mutex is held over "put_user(0, tsk->clear_child_tid)" in exit_mm(). The cred_guard_mutex is held over "get_user(futex_offset, ...") in exit_robust_list. The cred_guard_mutex held over copy_strings. The functions get_user and put_user can trigger a page fault which can potentially wait indefinitely in the case of userfaultfd or if userspace implements part of the page fault path. In any of those cases the userspace process that the kernel is waiting for might make a different system call that winds up taking the cred_guard_mutex and result in deadlock. Holding a mutex over any of those possibly indefinite waits for userspace does not appear necessary. Add exec_update_mutex that will just cover updating the process during exec where the permissions and the objects pointed to by the task struct may be out of sync. The plan is to switch the users of cred_guard_mutex to exec_update_mutex one by one. This lets us move forward while still being careful and not introducing any regressions. Link: https://lore.kernel.org/lkml/20160921152946.GA24210@dhcp22.suse.cz/ Link: https://lore.kernel.org/lkml/AM6PR03MB5170B06F3A2B75EFB98D071AE4E60@AM6PR03MB5170.eurprd03.prod.outlook.com/ Link: https://lore.kernel.org/linux-fsdevel/20161102181806.GB1112@redhat.com/ Link: https://lore.kernel.org/lkml/20160923095031.GA14923@redhat.com/ Link: https://lore.kernel.org/lkml/20170213141452.GA30203@redhat.com/ Ref: 45c1a159b85b ("Add PTRACE_O_TRACEVFORKDONE and PTRACE_O_TRACEEXIT facilities.") Ref: 456f17cd1a28 ("[PATCH] user-vm-unlock-2.5.31-A2") Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2020-03-25 15:03:36 +00:00
*/
static int exec_mmap(struct mm_struct *mm)
{
struct task_struct *tsk;
mm: per-thread vma caching This patch is a continuation of efforts trying to optimize find_vma(), avoiding potentially expensive rbtree walks to locate a vma upon faults. The original approach (https://lkml.org/lkml/2013/11/1/410), where the largest vma was also cached, ended up being too specific and random, thus further comparison with other approaches were needed. There are two things to consider when dealing with this, the cache hit rate and the latency of find_vma(). Improving the hit-rate does not necessarily translate in finding the vma any faster, as the overhead of any fancy caching schemes can be too high to consider. We currently cache the last used vma for the whole address space, which provides a nice optimization, reducing the total cycles in find_vma() by up to 250%, for workloads with good locality. On the other hand, this simple scheme is pretty much useless for workloads with poor locality. Analyzing ebizzy runs shows that, no matter how many threads are running, the mmap_cache hit rate is less than 2%, and in many situations below 1%. The proposed approach is to replace this scheme with a small per-thread cache, maximizing hit rates at a very low maintenance cost. Invalidations are performed by simply bumping up a 32-bit sequence number. The only expensive operation is in the rare case of a seq number overflow, where all caches that share the same address space are flushed. Upon a miss, the proposed replacement policy is based on the page number that contains the virtual address in question. Concretely, the following results are seen on an 80 core, 8 socket x86-64 box: 1) System bootup: Most programs are single threaded, so the per-thread scheme does improve ~50% hit rate by just adding a few more slots to the cache. +----------------+----------+------------------+ | caching scheme | hit-rate | cycles (billion) | +----------------+----------+------------------+ | baseline | 50.61% | 19.90 | | patched | 73.45% | 13.58 | +----------------+----------+------------------+ 2) Kernel build: This one is already pretty good with the current approach as we're dealing with good locality. +----------------+----------+------------------+ | caching scheme | hit-rate | cycles (billion) | +----------------+----------+------------------+ | baseline | 75.28% | 11.03 | | patched | 88.09% | 9.31 | +----------------+----------+------------------+ 3) Oracle 11g Data Mining (4k pages): Similar to the kernel build workload. +----------------+----------+------------------+ | caching scheme | hit-rate | cycles (billion) | +----------------+----------+------------------+ | baseline | 70.66% | 17.14 | | patched | 91.15% | 12.57 | +----------------+----------+------------------+ 4) Ebizzy: There's a fair amount of variation from run to run, but this approach always shows nearly perfect hit rates, while baseline is just about non-existent. The amounts of cycles can fluctuate between anywhere from ~60 to ~116 for the baseline scheme, but this approach reduces it considerably. For instance, with 80 threads: +----------------+----------+------------------+ | caching scheme | hit-rate | cycles (billion) | +----------------+----------+------------------+ | baseline | 1.06% | 91.54 | | patched | 99.97% | 14.18 | +----------------+----------+------------------+ [akpm@linux-foundation.org: fix nommu build, per Davidlohr] [akpm@linux-foundation.org: document vmacache_valid() logic] [akpm@linux-foundation.org: attempt to untangle header files] [akpm@linux-foundation.org: add vmacache_find() BUG_ON] [hughd@google.com: add vmacache_valid_mm() (from Oleg)] [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: adjust and enhance comments] Signed-off-by: Davidlohr Bueso <davidlohr@hp.com> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Michel Lespinasse <walken@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Tested-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 22:37:25 +00:00
struct mm_struct *old_mm, *active_mm;
exec: Add exec_update_mutex to replace cred_guard_mutex The cred_guard_mutex is problematic as it is held over possibly indefinite waits for userspace. The possible indefinite waits for userspace that I have identified are: The cred_guard_mutex is held in PTRACE_EVENT_EXIT waiting for the tracer. The cred_guard_mutex is held over "put_user(0, tsk->clear_child_tid)" in exit_mm(). The cred_guard_mutex is held over "get_user(futex_offset, ...") in exit_robust_list. The cred_guard_mutex held over copy_strings. The functions get_user and put_user can trigger a page fault which can potentially wait indefinitely in the case of userfaultfd or if userspace implements part of the page fault path. In any of those cases the userspace process that the kernel is waiting for might make a different system call that winds up taking the cred_guard_mutex and result in deadlock. Holding a mutex over any of those possibly indefinite waits for userspace does not appear necessary. Add exec_update_mutex that will just cover updating the process during exec where the permissions and the objects pointed to by the task struct may be out of sync. The plan is to switch the users of cred_guard_mutex to exec_update_mutex one by one. This lets us move forward while still being careful and not introducing any regressions. Link: https://lore.kernel.org/lkml/20160921152946.GA24210@dhcp22.suse.cz/ Link: https://lore.kernel.org/lkml/AM6PR03MB5170B06F3A2B75EFB98D071AE4E60@AM6PR03MB5170.eurprd03.prod.outlook.com/ Link: https://lore.kernel.org/linux-fsdevel/20161102181806.GB1112@redhat.com/ Link: https://lore.kernel.org/lkml/20160923095031.GA14923@redhat.com/ Link: https://lore.kernel.org/lkml/20170213141452.GA30203@redhat.com/ Ref: 45c1a159b85b ("Add PTRACE_O_TRACEVFORKDONE and PTRACE_O_TRACEEXIT facilities.") Ref: 456f17cd1a28 ("[PATCH] user-vm-unlock-2.5.31-A2") Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2020-03-25 15:03:36 +00:00
int ret;
/* Notify parent that we're no longer interested in the old VM */
tsk = current;
old_mm = current->mm;
exec_mm_release(tsk, old_mm);
if (old_mm)
sync_mm_rss(old_mm);
exec: Transform exec_update_mutex into a rw_semaphore Recently syzbot reported[0] that there is a deadlock amongst the users of exec_update_mutex. The problematic lock ordering found by lockdep was: perf_event_open (exec_update_mutex -> ovl_i_mutex) chown (ovl_i_mutex -> sb_writes) sendfile (sb_writes -> p->lock) by reading from a proc file and writing to overlayfs proc_pid_syscall (p->lock -> exec_update_mutex) While looking at possible solutions it occured to me that all of the users and possible users involved only wanted to state of the given process to remain the same. They are all readers. The only writer is exec. There is no reason for readers to block on each other. So fix this deadlock by transforming exec_update_mutex into a rw_semaphore named exec_update_lock that only exec takes for writing. Cc: Jann Horn <jannh@google.com> Cc: Vasiliy Kulikov <segoon@openwall.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Bernd Edlinger <bernd.edlinger@hotmail.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Christopher Yeoh <cyeoh@au1.ibm.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Fixes: eea9673250db ("exec: Add exec_update_mutex to replace cred_guard_mutex") [0] https://lkml.kernel.org/r/00000000000063640c05ade8e3de@google.com Reported-by: syzbot+db9cdf3dd1f64252c6ef@syzkaller.appspotmail.com Link: https://lkml.kernel.org/r/87ft4mbqen.fsf@x220.int.ebiederm.org Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2020-12-03 20:12:00 +00:00
ret = down_write_killable(&tsk->signal->exec_update_lock);
exec: Add exec_update_mutex to replace cred_guard_mutex The cred_guard_mutex is problematic as it is held over possibly indefinite waits for userspace. The possible indefinite waits for userspace that I have identified are: The cred_guard_mutex is held in PTRACE_EVENT_EXIT waiting for the tracer. The cred_guard_mutex is held over "put_user(0, tsk->clear_child_tid)" in exit_mm(). The cred_guard_mutex is held over "get_user(futex_offset, ...") in exit_robust_list. The cred_guard_mutex held over copy_strings. The functions get_user and put_user can trigger a page fault which can potentially wait indefinitely in the case of userfaultfd or if userspace implements part of the page fault path. In any of those cases the userspace process that the kernel is waiting for might make a different system call that winds up taking the cred_guard_mutex and result in deadlock. Holding a mutex over any of those possibly indefinite waits for userspace does not appear necessary. Add exec_update_mutex that will just cover updating the process during exec where the permissions and the objects pointed to by the task struct may be out of sync. The plan is to switch the users of cred_guard_mutex to exec_update_mutex one by one. This lets us move forward while still being careful and not introducing any regressions. Link: https://lore.kernel.org/lkml/20160921152946.GA24210@dhcp22.suse.cz/ Link: https://lore.kernel.org/lkml/AM6PR03MB5170B06F3A2B75EFB98D071AE4E60@AM6PR03MB5170.eurprd03.prod.outlook.com/ Link: https://lore.kernel.org/linux-fsdevel/20161102181806.GB1112@redhat.com/ Link: https://lore.kernel.org/lkml/20160923095031.GA14923@redhat.com/ Link: https://lore.kernel.org/lkml/20170213141452.GA30203@redhat.com/ Ref: 45c1a159b85b ("Add PTRACE_O_TRACEVFORKDONE and PTRACE_O_TRACEEXIT facilities.") Ref: 456f17cd1a28 ("[PATCH] user-vm-unlock-2.5.31-A2") Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2020-03-25 15:03:36 +00:00
if (ret)
return ret;
if (old_mm) {
/*
* If there is a pending fatal signal perhaps a signal
* whose default action is to create a coredump get
* out and die instead of going through with the exec.
*/
ret = mmap_read_lock_killable(old_mm);
if (ret) {
exec: Transform exec_update_mutex into a rw_semaphore Recently syzbot reported[0] that there is a deadlock amongst the users of exec_update_mutex. The problematic lock ordering found by lockdep was: perf_event_open (exec_update_mutex -> ovl_i_mutex) chown (ovl_i_mutex -> sb_writes) sendfile (sb_writes -> p->lock) by reading from a proc file and writing to overlayfs proc_pid_syscall (p->lock -> exec_update_mutex) While looking at possible solutions it occured to me that all of the users and possible users involved only wanted to state of the given process to remain the same. They are all readers. The only writer is exec. There is no reason for readers to block on each other. So fix this deadlock by transforming exec_update_mutex into a rw_semaphore named exec_update_lock that only exec takes for writing. Cc: Jann Horn <jannh@google.com> Cc: Vasiliy Kulikov <segoon@openwall.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Bernd Edlinger <bernd.edlinger@hotmail.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Christopher Yeoh <cyeoh@au1.ibm.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Fixes: eea9673250db ("exec: Add exec_update_mutex to replace cred_guard_mutex") [0] https://lkml.kernel.org/r/00000000000063640c05ade8e3de@google.com Reported-by: syzbot+db9cdf3dd1f64252c6ef@syzkaller.appspotmail.com Link: https://lkml.kernel.org/r/87ft4mbqen.fsf@x220.int.ebiederm.org Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2020-12-03 20:12:00 +00:00
up_write(&tsk->signal->exec_update_lock);
return ret;
}
}
exec: Add exec_update_mutex to replace cred_guard_mutex The cred_guard_mutex is problematic as it is held over possibly indefinite waits for userspace. The possible indefinite waits for userspace that I have identified are: The cred_guard_mutex is held in PTRACE_EVENT_EXIT waiting for the tracer. The cred_guard_mutex is held over "put_user(0, tsk->clear_child_tid)" in exit_mm(). The cred_guard_mutex is held over "get_user(futex_offset, ...") in exit_robust_list. The cred_guard_mutex held over copy_strings. The functions get_user and put_user can trigger a page fault which can potentially wait indefinitely in the case of userfaultfd or if userspace implements part of the page fault path. In any of those cases the userspace process that the kernel is waiting for might make a different system call that winds up taking the cred_guard_mutex and result in deadlock. Holding a mutex over any of those possibly indefinite waits for userspace does not appear necessary. Add exec_update_mutex that will just cover updating the process during exec where the permissions and the objects pointed to by the task struct may be out of sync. The plan is to switch the users of cred_guard_mutex to exec_update_mutex one by one. This lets us move forward while still being careful and not introducing any regressions. Link: https://lore.kernel.org/lkml/20160921152946.GA24210@dhcp22.suse.cz/ Link: https://lore.kernel.org/lkml/AM6PR03MB5170B06F3A2B75EFB98D071AE4E60@AM6PR03MB5170.eurprd03.prod.outlook.com/ Link: https://lore.kernel.org/linux-fsdevel/20161102181806.GB1112@redhat.com/ Link: https://lore.kernel.org/lkml/20160923095031.GA14923@redhat.com/ Link: https://lore.kernel.org/lkml/20170213141452.GA30203@redhat.com/ Ref: 45c1a159b85b ("Add PTRACE_O_TRACEVFORKDONE and PTRACE_O_TRACEEXIT facilities.") Ref: 456f17cd1a28 ("[PATCH] user-vm-unlock-2.5.31-A2") Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2020-03-25 15:03:36 +00:00
task_lock(tsk);
sched/membarrier: Fix p->mm->membarrier_state racy load The membarrier_state field is located within the mm_struct, which is not guaranteed to exist when used from runqueue-lock-free iteration on runqueues by the membarrier system call. Copy the membarrier_state from the mm_struct into the scheduler runqueue when the scheduler switches between mm. When registering membarrier for mm, after setting the registration bit in the mm membarrier state, issue a synchronize_rcu() to ensure the scheduler observes the change. In order to take care of the case where a runqueue keeps executing the target mm without swapping to other mm, iterate over each runqueue and issue an IPI to copy the membarrier_state from the mm_struct into each runqueue which have the same mm which state has just been modified. Move the mm membarrier_state field closer to pgd in mm_struct to use a cache line already touched by the scheduler switch_mm. The membarrier_execve() (now membarrier_exec_mmap) hook now needs to clear the runqueue's membarrier state in addition to clear the mm membarrier state, so move its implementation into the scheduler membarrier code so it can access the runqueue structure. Add memory barrier in membarrier_exec_mmap() prior to clearing the membarrier state, ensuring memory accesses executed prior to exec are not reordered with the stores clearing the membarrier state. As suggested by Linus, move all membarrier.c RCU read-side locks outside of the for each cpu loops. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Christoph Lameter <cl@linux.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Kirill Tkhai <tkhai@yandex.ru> Cc: Mike Galbraith <efault@gmx.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul E. McKenney <paulmck@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190919173705.2181-5-mathieu.desnoyers@efficios.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-09-19 17:37:02 +00:00
membarrier_exec_mmap(mm);
mm: fix exec activate_mm vs TLB shootdown and lazy tlb switching race Reading and modifying current->mm and current->active_mm and switching mm should be done with irqs off, to prevent races seeing an intermediate state. This is similar to commit 38cf307c1f20 ("mm: fix kthread_use_mm() vs TLB invalidate"). At exec-time when the new mm is activated, the old one should usually be single-threaded and no longer used, unless something else is holding an mm_users reference (which may be possible). Absent other mm_users, there is also a race with preemption and lazy tlb switching. Consider the kernel_execve case where the current thread is using a lazy tlb active mm: call_usermodehelper() kernel_execve() old_mm = current->mm; active_mm = current->active_mm; *** preempt *** --------------------> schedule() prev->active_mm = NULL; mmdrop(prev active_mm); ... <-------------------- schedule() current->mm = mm; current->active_mm = mm; if (!old_mm) mmdrop(active_mm); If we switch back to the kernel thread from a different mm, there is a double free of the old active_mm, and a missing free of the new one. Closing this race only requires interrupts to be disabled while ->mm and ->active_mm are being switched, but the TLB problem requires also holding interrupts off over activate_mm. Unfortunately not all archs can do that yet, e.g., arm defers the switch if irqs are disabled and expects finish_arch_post_lock_switch() to be called to complete the flush; um takes a blocking lock in activate_mm(). So as a first step, disable interrupts across the mm/active_mm updates to close the lazy tlb preempt race, and provide an arch option to extend that to activate_mm which allows architectures doing IPI based TLB shootdowns to close the second race. This is a bit ugly, but in the interest of fixing the bug and backporting before all architectures are converted this is a compromise. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200914045219.3736466-2-npiggin@gmail.com
2020-09-14 04:52:16 +00:00
local_irq_disable();
active_mm = tsk->active_mm;
tsk->active_mm = mm;
mm: fix exec activate_mm vs TLB shootdown and lazy tlb switching race Reading and modifying current->mm and current->active_mm and switching mm should be done with irqs off, to prevent races seeing an intermediate state. This is similar to commit 38cf307c1f20 ("mm: fix kthread_use_mm() vs TLB invalidate"). At exec-time when the new mm is activated, the old one should usually be single-threaded and no longer used, unless something else is holding an mm_users reference (which may be possible). Absent other mm_users, there is also a race with preemption and lazy tlb switching. Consider the kernel_execve case where the current thread is using a lazy tlb active mm: call_usermodehelper() kernel_execve() old_mm = current->mm; active_mm = current->active_mm; *** preempt *** --------------------> schedule() prev->active_mm = NULL; mmdrop(prev active_mm); ... <-------------------- schedule() current->mm = mm; current->active_mm = mm; if (!old_mm) mmdrop(active_mm); If we switch back to the kernel thread from a different mm, there is a double free of the old active_mm, and a missing free of the new one. Closing this race only requires interrupts to be disabled while ->mm and ->active_mm are being switched, but the TLB problem requires also holding interrupts off over activate_mm. Unfortunately not all archs can do that yet, e.g., arm defers the switch if irqs are disabled and expects finish_arch_post_lock_switch() to be called to complete the flush; um takes a blocking lock in activate_mm(). So as a first step, disable interrupts across the mm/active_mm updates to close the lazy tlb preempt race, and provide an arch option to extend that to activate_mm which allows architectures doing IPI based TLB shootdowns to close the second race. This is a bit ugly, but in the interest of fixing the bug and backporting before all architectures are converted this is a compromise. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200914045219.3736466-2-npiggin@gmail.com
2020-09-14 04:52:16 +00:00
tsk->mm = mm;
/*
* This prevents preemption while active_mm is being loaded and
* it and mm are being updated, which could cause problems for
* lazy tlb mm refcounting when these are updated by context
* switches. Not all architectures can handle irqs off over
* activate_mm yet.
*/
if (!IS_ENABLED(CONFIG_ARCH_WANT_IRQS_OFF_ACTIVATE_MM))
local_irq_enable();
activate_mm(active_mm, mm);
mm: fix exec activate_mm vs TLB shootdown and lazy tlb switching race Reading and modifying current->mm and current->active_mm and switching mm should be done with irqs off, to prevent races seeing an intermediate state. This is similar to commit 38cf307c1f20 ("mm: fix kthread_use_mm() vs TLB invalidate"). At exec-time when the new mm is activated, the old one should usually be single-threaded and no longer used, unless something else is holding an mm_users reference (which may be possible). Absent other mm_users, there is also a race with preemption and lazy tlb switching. Consider the kernel_execve case where the current thread is using a lazy tlb active mm: call_usermodehelper() kernel_execve() old_mm = current->mm; active_mm = current->active_mm; *** preempt *** --------------------> schedule() prev->active_mm = NULL; mmdrop(prev active_mm); ... <-------------------- schedule() current->mm = mm; current->active_mm = mm; if (!old_mm) mmdrop(active_mm); If we switch back to the kernel thread from a different mm, there is a double free of the old active_mm, and a missing free of the new one. Closing this race only requires interrupts to be disabled while ->mm and ->active_mm are being switched, but the TLB problem requires also holding interrupts off over activate_mm. Unfortunately not all archs can do that yet, e.g., arm defers the switch if irqs are disabled and expects finish_arch_post_lock_switch() to be called to complete the flush; um takes a blocking lock in activate_mm(). So as a first step, disable interrupts across the mm/active_mm updates to close the lazy tlb preempt race, and provide an arch option to extend that to activate_mm which allows architectures doing IPI based TLB shootdowns to close the second race. This is a bit ugly, but in the interest of fixing the bug and backporting before all architectures are converted this is a compromise. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200914045219.3736466-2-npiggin@gmail.com
2020-09-14 04:52:16 +00:00
if (IS_ENABLED(CONFIG_ARCH_WANT_IRQS_OFF_ACTIVATE_MM))
local_irq_enable();
mm: per-thread vma caching This patch is a continuation of efforts trying to optimize find_vma(), avoiding potentially expensive rbtree walks to locate a vma upon faults. The original approach (https://lkml.org/lkml/2013/11/1/410), where the largest vma was also cached, ended up being too specific and random, thus further comparison with other approaches were needed. There are two things to consider when dealing with this, the cache hit rate and the latency of find_vma(). Improving the hit-rate does not necessarily translate in finding the vma any faster, as the overhead of any fancy caching schemes can be too high to consider. We currently cache the last used vma for the whole address space, which provides a nice optimization, reducing the total cycles in find_vma() by up to 250%, for workloads with good locality. On the other hand, this simple scheme is pretty much useless for workloads with poor locality. Analyzing ebizzy runs shows that, no matter how many threads are running, the mmap_cache hit rate is less than 2%, and in many situations below 1%. The proposed approach is to replace this scheme with a small per-thread cache, maximizing hit rates at a very low maintenance cost. Invalidations are performed by simply bumping up a 32-bit sequence number. The only expensive operation is in the rare case of a seq number overflow, where all caches that share the same address space are flushed. Upon a miss, the proposed replacement policy is based on the page number that contains the virtual address in question. Concretely, the following results are seen on an 80 core, 8 socket x86-64 box: 1) System bootup: Most programs are single threaded, so the per-thread scheme does improve ~50% hit rate by just adding a few more slots to the cache. +----------------+----------+------------------+ | caching scheme | hit-rate | cycles (billion) | +----------------+----------+------------------+ | baseline | 50.61% | 19.90 | | patched | 73.45% | 13.58 | +----------------+----------+------------------+ 2) Kernel build: This one is already pretty good with the current approach as we're dealing with good locality. +----------------+----------+------------------+ | caching scheme | hit-rate | cycles (billion) | +----------------+----------+------------------+ | baseline | 75.28% | 11.03 | | patched | 88.09% | 9.31 | +----------------+----------+------------------+ 3) Oracle 11g Data Mining (4k pages): Similar to the kernel build workload. +----------------+----------+------------------+ | caching scheme | hit-rate | cycles (billion) | +----------------+----------+------------------+ | baseline | 70.66% | 17.14 | | patched | 91.15% | 12.57 | +----------------+----------+------------------+ 4) Ebizzy: There's a fair amount of variation from run to run, but this approach always shows nearly perfect hit rates, while baseline is just about non-existent. The amounts of cycles can fluctuate between anywhere from ~60 to ~116 for the baseline scheme, but this approach reduces it considerably. For instance, with 80 threads: +----------------+----------+------------------+ | caching scheme | hit-rate | cycles (billion) | +----------------+----------+------------------+ | baseline | 1.06% | 91.54 | | patched | 99.97% | 14.18 | +----------------+----------+------------------+ [akpm@linux-foundation.org: fix nommu build, per Davidlohr] [akpm@linux-foundation.org: document vmacache_valid() logic] [akpm@linux-foundation.org: attempt to untangle header files] [akpm@linux-foundation.org: add vmacache_find() BUG_ON] [hughd@google.com: add vmacache_valid_mm() (from Oleg)] [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: adjust and enhance comments] Signed-off-by: Davidlohr Bueso <davidlohr@hp.com> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Michel Lespinasse <walken@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Tested-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 22:37:25 +00:00
tsk->mm->vmacache_seqnum = 0;
vmacache_flush(tsk);
task_unlock(tsk);
if (old_mm) {
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 04:33:25 +00:00
mmap_read_unlock(old_mm);
BUG_ON(active_mm != old_mm);
setmax_mm_hiwater_rss(&tsk->signal->maxrss, old_mm);
mm owner: fix race between swapoff and exit There's a race between mm->owner assignment and swapoff, more easily seen when task slab poisoning is turned on. The condition occurs when try_to_unuse() runs in parallel with an exiting task. A similar race can occur with callers of get_task_mm(), such as /proc/<pid>/<mmstats> or ptrace or page migration. CPU0 CPU1 try_to_unuse looks at mm = task0->mm increments mm->mm_users task 0 exits mm->owner needs to be updated, but no new owner is found (mm_users > 1, but no other task has task->mm = task0->mm) mm_update_next_owner() leaves mmput(mm) decrements mm->mm_users task0 freed dereferencing mm->owner fails The fix is to notify the subsystem via mm_owner_changed callback(), if no new owner is found, by specifying the new task as NULL. Jiri Slaby: mm->owner was set to NULL prior to calling cgroup_mm_owner_callbacks(), but must be set after that, so as not to pass NULL as old owner causing oops. Daisuke Nishimura: mm_update_next_owner() may set mm->owner to NULL, but mem_cgroup_from_task() and its callers need to take account of this situation to avoid oops. Hugh Dickins: Lockdep warning and hang below exec_mmap() when testing these patches. exit_mm() up_reads mmap_sem before calling mm_update_next_owner(), so exec_mmap() now needs to do the same. And with that repositioning, there's now no point in mm_need_new_owner() allowing for NULL mm. Reported-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-28 22:09:31 +00:00
mm_update_next_owner(old_mm);
mmput(old_mm);
return 0;
}
mmdrop(active_mm);
return 0;
}
static int de_thread(struct task_struct *tsk)
{
struct signal_struct *sig = tsk->signal;
struct sighand_struct *oldsighand = tsk->sighand;
spinlock_t *lock = &oldsighand->siglock;
if (thread_group_empty(tsk))
goto no_thread_group;
/*
* Kill all other threads in the thread group.
*/
spin_lock_irq(lock);
if (signal_group_exit(sig)) {
/*
* Another group action in progress, just
* return so that the signal is processed.
*/
spin_unlock_irq(lock);
return -EAGAIN;
}
sig->group_exit_task = tsk;
sig->notify_count = zap_other_threads(tsk);
if (!thread_group_leader(tsk))
sig->notify_count--;
while (sig->notify_count) {
__set_current_state(TASK_KILLABLE);
spin_unlock_irq(lock);
Revert "exec: make de_thread() freezable" Revert commit c22397888f1e "exec: make de_thread() freezable" as requested by Ingo Molnar: "So there's a new regression in v4.20-rc4, my desktop produces this lockdep splat: [ 1772.588771] WARNING: pkexec/4633 still has locks held! [ 1772.588773] 4.20.0-rc4-custom-00213-g93a49841322b #1 Not tainted [ 1772.588775] ------------------------------------ [ 1772.588776] 1 lock held by pkexec/4633: [ 1772.588778] #0: 00000000ed85fbf8 (&sig->cred_guard_mutex){+.+.}, at: prepare_bprm_creds+0x2a/0x70 [ 1772.588786] stack backtrace: [ 1772.588789] CPU: 7 PID: 4633 Comm: pkexec Not tainted 4.20.0-rc4-custom-00213-g93a49841322b #1 [ 1772.588792] Call Trace: [ 1772.588800] dump_stack+0x85/0xcb [ 1772.588803] flush_old_exec+0x116/0x890 [ 1772.588807] ? load_elf_phdrs+0x72/0xb0 [ 1772.588809] load_elf_binary+0x291/0x1620 [ 1772.588815] ? sched_clock+0x5/0x10 [ 1772.588817] ? search_binary_handler+0x6d/0x240 [ 1772.588820] search_binary_handler+0x80/0x240 [ 1772.588823] load_script+0x201/0x220 [ 1772.588825] search_binary_handler+0x80/0x240 [ 1772.588828] __do_execve_file.isra.32+0x7d2/0xa60 [ 1772.588832] ? strncpy_from_user+0x40/0x180 [ 1772.588835] __x64_sys_execve+0x34/0x40 [ 1772.588838] do_syscall_64+0x60/0x1c0 The warning gets triggered by an ancient lockdep check in the freezer: (gdb) list *0xffffffff812ece06 0xffffffff812ece06 is in flush_old_exec (./include/linux/freezer.h:57). 52 * DO NOT ADD ANY NEW CALLERS OF THIS FUNCTION 53 * If try_to_freeze causes a lockdep warning it means the caller may deadlock 54 */ 55 static inline bool try_to_freeze_unsafe(void) 56 { 57 might_sleep(); 58 if (likely(!freezing(current))) 59 return false; 60 return __refrigerator(false); 61 } I reviewed the ->cred_guard_mutex code, and the mutex is held across all of exec() - and we always did this. But there's this recent -rc4 commit: > Chanho Min (1): > exec: make de_thread() freezable c22397888f1e: exec: make de_thread() freezable I believe this commit is bogus, you cannot call try_to_freeze() from de_thread(), because it's holding the ->cred_guard_mutex." Reported-by: Ingo Molnar <mingo@kernel.org> Tested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-03 12:04:18 +00:00
schedule();
if (__fatal_signal_pending(tsk))
goto killed;
spin_lock_irq(lock);
}
spin_unlock_irq(lock);
/*
* At this point all other threads have exited, all we have to
* do is to wait for the thread group leader to become inactive,
* and to assume its PID:
*/
if (!thread_group_leader(tsk)) {
struct task_struct *leader = tsk->group_leader;
for (;;) {
cgroup_threadgroup_change_begin(tsk);
write_lock_irq(&tasklist_lock);
/*
* Do this under tasklist_lock to ensure that
* exit_notify() can't miss ->group_exit_task
*/
sig->notify_count = -1;
if (likely(leader->exit_state))
break;
__set_current_state(TASK_KILLABLE);
write_unlock_irq(&tasklist_lock);
cgroup_threadgroup_change_end(tsk);
Revert "exec: make de_thread() freezable" Revert commit c22397888f1e "exec: make de_thread() freezable" as requested by Ingo Molnar: "So there's a new regression in v4.20-rc4, my desktop produces this lockdep splat: [ 1772.588771] WARNING: pkexec/4633 still has locks held! [ 1772.588773] 4.20.0-rc4-custom-00213-g93a49841322b #1 Not tainted [ 1772.588775] ------------------------------------ [ 1772.588776] 1 lock held by pkexec/4633: [ 1772.588778] #0: 00000000ed85fbf8 (&sig->cred_guard_mutex){+.+.}, at: prepare_bprm_creds+0x2a/0x70 [ 1772.588786] stack backtrace: [ 1772.588789] CPU: 7 PID: 4633 Comm: pkexec Not tainted 4.20.0-rc4-custom-00213-g93a49841322b #1 [ 1772.588792] Call Trace: [ 1772.588800] dump_stack+0x85/0xcb [ 1772.588803] flush_old_exec+0x116/0x890 [ 1772.588807] ? load_elf_phdrs+0x72/0xb0 [ 1772.588809] load_elf_binary+0x291/0x1620 [ 1772.588815] ? sched_clock+0x5/0x10 [ 1772.588817] ? search_binary_handler+0x6d/0x240 [ 1772.588820] search_binary_handler+0x80/0x240 [ 1772.588823] load_script+0x201/0x220 [ 1772.588825] search_binary_handler+0x80/0x240 [ 1772.588828] __do_execve_file.isra.32+0x7d2/0xa60 [ 1772.588832] ? strncpy_from_user+0x40/0x180 [ 1772.588835] __x64_sys_execve+0x34/0x40 [ 1772.588838] do_syscall_64+0x60/0x1c0 The warning gets triggered by an ancient lockdep check in the freezer: (gdb) list *0xffffffff812ece06 0xffffffff812ece06 is in flush_old_exec (./include/linux/freezer.h:57). 52 * DO NOT ADD ANY NEW CALLERS OF THIS FUNCTION 53 * If try_to_freeze causes a lockdep warning it means the caller may deadlock 54 */ 55 static inline bool try_to_freeze_unsafe(void) 56 { 57 might_sleep(); 58 if (likely(!freezing(current))) 59 return false; 60 return __refrigerator(false); 61 } I reviewed the ->cred_guard_mutex code, and the mutex is held across all of exec() - and we always did this. But there's this recent -rc4 commit: > Chanho Min (1): > exec: make de_thread() freezable c22397888f1e: exec: make de_thread() freezable I believe this commit is bogus, you cannot call try_to_freeze() from de_thread(), because it's holding the ->cred_guard_mutex." Reported-by: Ingo Molnar <mingo@kernel.org> Tested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-03 12:04:18 +00:00
schedule();
if (__fatal_signal_pending(tsk))
goto killed;
}
/*
* The only record we have of the real-time age of a
* process, regardless of execs it's done, is start_time.
* All the past CPU time is accumulated in signal_struct
* from sister threads now dead. But in this non-leader
* exec, nothing survives from the original leader thread,
* whose birth marks the true age of this process now.
* When we take on its identity by switching to its PID, we
* also take its birthdate (always earlier than our own).
*/
tsk->start_time = leader->start_time;
tsk->start_boottime = leader->start_boottime;
BUG_ON(!same_thread_group(leader, tsk));
/*
* An exec() starts a new thread group with the
* TGID of the previous thread group. Rehash the
* two threads with a switched PID, and release
* the former thread group leader:
*/
[PATCH] pidhash: kill switch_exec_pids switch_exec_pids is only called from de_thread by way of exec, and it is only called when we are exec'ing from a non thread group leader. Currently switch_exec_pids gives the leader the pid of the thread and unhashes and rehashes all of the process groups. The leader is already in the EXIT_DEAD state so no one cares about it's pids. The only concern for the leader is that __unhash_process called from release_task will function correctly. If we don't touch the leader at all we know that __unhash_process will work fine so there is no need to touch the leader. For the task becomming the thread group leader, we just need to give it the pid of the old thread group leader, add it to the task list, and attach it to the session and the process group of the thread group. Currently de_thread is also adding the task to the task list which is just silly. Currently the only leader of __detach_pid besides detach_pid is switch_exec_pids because of the ugly extra work that was being performed. So this patch removes switch_exec_pids because it is doing too much, it is creating an unnecessary special case in pid.c, duing work duplicated in de_thread, and generally obscuring what it is going on. The necessary work is added to de_thread, and it seems to be a little clearer there what is going on. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Kirill Korotaev <dev@sw.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-29 00:11:03 +00:00
/* Become a process group leader with the old leader's pid.
* The old leader becomes a thread of the this thread group.
[PATCH] pidhash: kill switch_exec_pids switch_exec_pids is only called from de_thread by way of exec, and it is only called when we are exec'ing from a non thread group leader. Currently switch_exec_pids gives the leader the pid of the thread and unhashes and rehashes all of the process groups. The leader is already in the EXIT_DEAD state so no one cares about it's pids. The only concern for the leader is that __unhash_process called from release_task will function correctly. If we don't touch the leader at all we know that __unhash_process will work fine so there is no need to touch the leader. For the task becomming the thread group leader, we just need to give it the pid of the old thread group leader, add it to the task list, and attach it to the session and the process group of the thread group. Currently de_thread is also adding the task to the task list which is just silly. Currently the only leader of __detach_pid besides detach_pid is switch_exec_pids because of the ugly extra work that was being performed. So this patch removes switch_exec_pids because it is doing too much, it is creating an unnecessary special case in pid.c, duing work duplicated in de_thread, and generally obscuring what it is going on. The necessary work is added to de_thread, and it seems to be a little clearer there what is going on. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Kirill Korotaev <dev@sw.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-29 00:11:03 +00:00
*/
proc: Ensure we see the exit of each process tid exactly once When the thread group leader changes during exec and the old leaders thread is reaped proc_flush_pid will flush the dentries for the entire process because the leader still has it's original pid. Fix this by exchanging the pids in an rcu safe manner, and wrapping the code to do that up in a helper exchange_tids. When I removed switch_exec_pids and introduced this behavior in d73d65293e3e ("[PATCH] pidhash: kill switch_exec_pids") there really was nothing that cared as flushing happened with the cached dentry and de_thread flushed both of them on exec. This lack of fully exchanging pids became a problem a few months later when I introduced 48e6484d4902 ("[PATCH] proc: Rewrite the proc dentry flush on exit optimization"). Which overlooked the de_thread case was no longer swapping pids, and I was looking up proc dentries by task->pid. The current behavior isn't properly a bug as everything in proc will continue to work correctly just a little bit less efficiently. Fix this just so there are no little surprise corner cases waiting to bite people. -- Oleg points out this could be an issue in next_tgid in proc where has_group_leader_pid is called, and reording some of the assignments should fix that. -- Oleg points out this will break the 10 year old hack in __exit_signal.c > /* > * This can only happen if the caller is de_thread(). > * FIXME: this is the temporary hack, we should teach > * posix-cpu-timers to handle this case correctly. > */ > if (unlikely(has_group_leader_pid(tsk))) > posix_cpu_timers_exit_group(tsk); The code in next_tgid has been changed to use PIDTYPE_TGID, and the posix cpu timers code has been fixed so it does not need the 10 year old hack, so this should be safe to merge now. Link: https://lore.kernel.org/lkml/87h7x3ajll.fsf_-_@x220.int.ebiederm.org/ Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Fixes: 48e6484d4902 ("[PATCH] proc: Rewrite the proc dentry flush on exit optimization"). Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2020-04-19 11:35:02 +00:00
exchange_tids(tsk, leader);
transfer_pid(leader, tsk, PIDTYPE_TGID);
transfer_pid(leader, tsk, PIDTYPE_PGID);
transfer_pid(leader, tsk, PIDTYPE_SID);
list_replace_rcu(&leader->tasks, &tsk->tasks);
list_replace_init(&leader->sibling, &tsk->sibling);
tsk->group_leader = tsk;
leader->group_leader = tsk;
[PATCH] de_thread: Don't confuse users do_each_thread. Oleg Nesterov spotted two interesting bugs with the current de_thread code. The simplest is a long standing double decrement of __get_cpu_var(process_counts) in __unhash_process. Caused by two processes exiting when only one was created. The other is that since we no longer detach from the thread_group list it is possible for do_each_thread when run under the tasklist_lock to see the same task_struct twice. Once on the task list as a thread_group_leader, and once on the thread list of another thread. The double appearance in do_each_thread can cause a double increment of mm_core_waiters in zap_threads resulting in problems later on in coredump_wait. To remedy those two problems this patch takes the simple approach of changing the old thread group leader into a child thread. The only routine in release_task that cares is __unhash_process, and it can be trivially seen that we handle cleaning up a thread group leader properly. Since de_thread doesn't change the pid of the exiting leader process and instead shares it with the new leader process. I change thread_group_leader to recognize group leadership based on the group_leader field and not based on pids. This should also be slightly cheaper then the existing thread_group_leader macro. I performed a quick audit and I couldn't see any user of thread_group_leader that cared about the difference. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-10 23:16:49 +00:00
tsk->exit_signal = SIGCHLD;
leader->exit_signal = -1;
BUG_ON(leader->exit_state != EXIT_ZOMBIE);
leader->exit_state = EXIT_DEAD;
/*
* We are going to release_task()->ptrace_unlink() silently,
* the tracer can sleep in do_wait(). EXIT_DEAD guarantees
* the tracer wont't block again waiting for this thread.
*/
if (unlikely(leader->ptrace))
__wake_up_parent(leader, leader->parent);
write_unlock_irq(&tasklist_lock);
cgroup_threadgroup_change_end(tsk);
release_task(leader);
}
sig->group_exit_task = NULL;
sig->notify_count = 0;
no_thread_group:
/* we have changed execution domain */
tsk->exit_signal = SIGCHLD;
BUG_ON(!thread_group_leader(tsk));
return 0;
killed:
/* protects against exit_notify() and __exit_signal() */
read_lock(&tasklist_lock);
sig->group_exit_task = NULL;
sig->notify_count = 0;
read_unlock(&tasklist_lock);
return -EAGAIN;
}
/*
* This function makes sure the current process has its own signal table,
* so that flush_signal_handlers can later reset the handlers without
* disturbing other processes. (Other processes might share the signal
* table via the CLONE_SIGHAND option to clone().)
*/
static int unshare_sighand(struct task_struct *me)
{
struct sighand_struct *oldsighand = me->sighand;
sched/core: Convert sighand_struct.count to refcount_t atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable sighand_struct.count is used as pure reference counter. Convert it to refcount_t and fix up the operations. ** Important note for maintainers: Some functions from refcount_t API defined in lib/refcount.c have different memory ordering guarantees than their atomic counterparts. The full comparison can be seen in https://lkml.org/lkml/2017/11/15/57 and it is hopefully soon in state to be merged to the documentation tree. Normally the differences should not matter since refcount_t provides enough guarantees to satisfy the refcounting use cases, but in some rare cases it might matter. Please double check that you don't have some undocumented memory guarantees for this variable usage. For the sighand_struct.count it might make a difference in following places: - __cleanup_sighand: decrement in refcount_dec_and_test() only provides RELEASE ordering and control dependency on success vs. fully ordered atomic counterpart Suggested-by: Kees Cook <keescook@chromium.org> Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: David Windsor <dwindsor@gmail.com> Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com> Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akpm@linux-foundation.org Cc: viro@zeniv.linux.org.uk Link: https://lkml.kernel.org/r/1547814450-18902-2-git-send-email-elena.reshetova@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-01-18 12:27:26 +00:00
if (refcount_read(&oldsighand->count) != 1) {
struct sighand_struct *newsighand;
/*
* This ->sighand is shared with the CLONE_SIGHAND
* but not CLONE_THREAD task, switch to the new one.
*/
newsighand = kmem_cache_alloc(sighand_cachep, GFP_KERNEL);
if (!newsighand)
return -ENOMEM;
sched/core: Convert sighand_struct.count to refcount_t atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable sighand_struct.count is used as pure reference counter. Convert it to refcount_t and fix up the operations. ** Important note for maintainers: Some functions from refcount_t API defined in lib/refcount.c have different memory ordering guarantees than their atomic counterparts. The full comparison can be seen in https://lkml.org/lkml/2017/11/15/57 and it is hopefully soon in state to be merged to the documentation tree. Normally the differences should not matter since refcount_t provides enough guarantees to satisfy the refcounting use cases, but in some rare cases it might matter. Please double check that you don't have some undocumented memory guarantees for this variable usage. For the sighand_struct.count it might make a difference in following places: - __cleanup_sighand: decrement in refcount_dec_and_test() only provides RELEASE ordering and control dependency on success vs. fully ordered atomic counterpart Suggested-by: Kees Cook <keescook@chromium.org> Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: David Windsor <dwindsor@gmail.com> Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com> Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akpm@linux-foundation.org Cc: viro@zeniv.linux.org.uk Link: https://lkml.kernel.org/r/1547814450-18902-2-git-send-email-elena.reshetova@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-01-18 12:27:26 +00:00
refcount_set(&newsighand->count, 1);
memcpy(newsighand->action, oldsighand->action,
sizeof(newsighand->action));
write_lock_irq(&tasklist_lock);
spin_lock(&oldsighand->siglock);
rcu_assign_pointer(me->sighand, newsighand);
spin_unlock(&oldsighand->siglock);
write_unlock_irq(&tasklist_lock);
signal/timer/event: signalfd core This patch series implements the new signalfd() system call. I took part of the original Linus code (and you know how badly it can be broken :), and I added even more breakage ;) Signals are fetched from the same signal queue used by the process, so signalfd will compete with standard kernel delivery in dequeue_signal(). If you want to reliably fetch signals on the signalfd file, you need to block them with sigprocmask(SIG_BLOCK). This seems to be working fine on my Dual Opteron machine. I made a quick test program for it: http://www.xmailserver.org/signafd-test.c The signalfd() system call implements signal delivery into a file descriptor receiver. The signalfd file descriptor if created with the following API: int signalfd(int ufd, const sigset_t *mask, size_t masksize); The "ufd" parameter allows to change an existing signalfd sigmask, w/out going to close/create cycle (Linus idea). Use "ufd" == -1 if you want a brand new signalfd file. The "mask" allows to specify the signal mask of signals that we are interested in. The "masksize" parameter is the size of "mask". The signalfd fd supports the poll(2) and read(2) system calls. The poll(2) will return POLLIN when signals are available to be dequeued. As a direct consequence of supporting the Linux poll subsystem, the signalfd fd can use used together with epoll(2) too. The read(2) system call will return a "struct signalfd_siginfo" structure in the userspace supplied buffer. The return value is the number of bytes copied in the supplied buffer, or -1 in case of error. The read(2) call can also return 0, in case the sighand structure to which the signalfd was attached, has been orphaned. The O_NONBLOCK flag is also supported, and read(2) will return -EAGAIN in case no signal is available. If the size of the buffer passed to read(2) is lower than sizeof(struct signalfd_siginfo), -EINVAL is returned. A read from the signalfd can also return -ERESTARTSYS in case a signal hits the process. The format of the struct signalfd_siginfo is, and the valid fields depends of the (->code & __SI_MASK) value, in the same way a struct siginfo would: struct signalfd_siginfo { __u32 signo; /* si_signo */ __s32 err; /* si_errno */ __s32 code; /* si_code */ __u32 pid; /* si_pid */ __u32 uid; /* si_uid */ __s32 fd; /* si_fd */ __u32 tid; /* si_fd */ __u32 band; /* si_band */ __u32 overrun; /* si_overrun */ __u32 trapno; /* si_trapno */ __s32 status; /* si_status */ __s32 svint; /* si_int */ __u64 svptr; /* si_ptr */ __u64 utime; /* si_utime */ __u64 stime; /* si_stime */ __u64 addr; /* si_addr */ }; [akpm@linux-foundation.org: fix signalfd_copyinfo() on i386] Signed-off-by: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11 05:23:13 +00:00
__cleanup_sighand(oldsighand);
}
return 0;
}
exec: avoid gcc-8 warning for get_task_comm gcc-8 warns about using strncpy() with the source size as the limit: fs/exec.c:1223:32: error: argument to 'sizeof' in 'strncpy' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess] This is indeed slightly suspicious, as it protects us from source arguments without NUL-termination, but does not guarantee that the destination is terminated. This keeps the strncpy() to ensure we have properly padded target buffer, but ensures that we use the correct length, by passing the actual length of the destination buffer as well as adding a build-time check to ensure it is exactly TASK_COMM_LEN. There are only 23 callsites which I all reviewed to ensure this is currently the case. We could get away with doing only the check or passing the right length, but it doesn't hurt to do both. Link: http://lkml.kernel.org/r/20171205151724.1764896-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Suggested-by: Kees Cook <keescook@chromium.org> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Serge Hallyn <serge@hallyn.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Aleksa Sarai <asarai@suse.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-12-14 23:32:41 +00:00
char *__get_task_comm(char *buf, size_t buf_size, struct task_struct *tsk)
{
task_lock(tsk);
exec: avoid gcc-8 warning for get_task_comm gcc-8 warns about using strncpy() with the source size as the limit: fs/exec.c:1223:32: error: argument to 'sizeof' in 'strncpy' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess] This is indeed slightly suspicious, as it protects us from source arguments without NUL-termination, but does not guarantee that the destination is terminated. This keeps the strncpy() to ensure we have properly padded target buffer, but ensures that we use the correct length, by passing the actual length of the destination buffer as well as adding a build-time check to ensure it is exactly TASK_COMM_LEN. There are only 23 callsites which I all reviewed to ensure this is currently the case. We could get away with doing only the check or passing the right length, but it doesn't hurt to do both. Link: http://lkml.kernel.org/r/20171205151724.1764896-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Suggested-by: Kees Cook <keescook@chromium.org> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Serge Hallyn <serge@hallyn.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Aleksa Sarai <asarai@suse.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-12-14 23:32:41 +00:00
strncpy(buf, tsk->comm, buf_size);
task_unlock(tsk);
return buf;
}
exec: avoid gcc-8 warning for get_task_comm gcc-8 warns about using strncpy() with the source size as the limit: fs/exec.c:1223:32: error: argument to 'sizeof' in 'strncpy' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess] This is indeed slightly suspicious, as it protects us from source arguments without NUL-termination, but does not guarantee that the destination is terminated. This keeps the strncpy() to ensure we have properly padded target buffer, but ensures that we use the correct length, by passing the actual length of the destination buffer as well as adding a build-time check to ensure it is exactly TASK_COMM_LEN. There are only 23 callsites which I all reviewed to ensure this is currently the case. We could get away with doing only the check or passing the right length, but it doesn't hurt to do both. Link: http://lkml.kernel.org/r/20171205151724.1764896-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Suggested-by: Kees Cook <keescook@chromium.org> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Serge Hallyn <serge@hallyn.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Aleksa Sarai <asarai@suse.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-12-14 23:32:41 +00:00
EXPORT_SYMBOL_GPL(__get_task_comm);
/*
* These functions flushes out all traces of the currently running executable
* so that a new one can be started
*/
void __set_task_comm(struct task_struct *tsk, const char *buf, bool exec)
{
task_lock(tsk);
tracepoint: add tracepoints for debugging oom_score_adj oom_score_adj is used for guarding processes from OOM-Killer. One of problem is that it's inherited at fork(). When a daemon set oom_score_adj and make children, it's hard to know where the value is set. This patch adds some tracepoints useful for debugging. This patch adds 3 trace points. - creating new task - renaming a task (exec) - set oom_score_adj To debug, users need to enable some trace pointer. Maybe filtering is useful as # EVENT=/sys/kernel/debug/tracing/events/task/ # echo "oom_score_adj != 0" > $EVENT/task_newtask/filter # echo "oom_score_adj != 0" > $EVENT/task_rename/filter # echo 1 > $EVENT/enable # EVENT=/sys/kernel/debug/tracing/events/oom/ # echo 1 > $EVENT/enable output will be like this. # grep oom /sys/kernel/debug/tracing/trace bash-7699 [007] d..3 5140.744510: oom_score_adj_update: pid=7699 comm=bash oom_score_adj=-1000 bash-7699 [007] ...1 5151.818022: task_newtask: pid=7729 comm=bash clone_flags=1200011 oom_score_adj=-1000 ls-7729 [003] ...2 5151.818504: task_rename: pid=7729 oldcomm=bash newcomm=ls oom_score_adj=-1000 bash-7699 [002] ...1 5175.701468: task_newtask: pid=7730 comm=bash clone_flags=1200011 oom_score_adj=-1000 grep-7730 [007] ...2 5175.701993: task_rename: pid=7730 oldcomm=bash newcomm=grep oom_score_adj=-1000 Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10 23:08:09 +00:00
trace_task_rename(tsk, buf);
strlcpy(tsk->comm, buf, sizeof(tsk->comm));
task_unlock(tsk);
perf_event_comm(tsk, exec);
}
/*
* Calling this is the point of no return. None of the failures will be
* seen by userspace since either the process is already taking a fatal
* signal (via de_thread() or coredump), or will have SEGV raised
* (after exec_mmap()) by search_binary_handler (see below).
*/
int begin_new_exec(struct linux_binprm * bprm)
{
struct task_struct *me = current;
int retval;
exec: Compute file based creds only once Move the computation of creds from prepare_binfmt into begin_new_exec so that the creds need only be computed once. This is just code reorganization no semantic changes of any kind are made. Moving the computation is safe. I have looked through the kernel and verified none of the binfmts look at bprm->cred directly, and that there are no helpers that look at bprm->cred indirectly. Which means that it is not a problem to compute the bprm->cred later in the execution flow as it is not used until it becomes current->cred. A new function bprm_creds_from_file is added to contain the work that needs to be done. bprm_creds_from_file first computes which file bprm->executable or most likely bprm->file that the bprm->creds will be computed from. The funciton bprm_fill_uid is updated to receive the file instead of accessing bprm->file. The now unnecessary work needed to reset the bprm->cred->euid, and bprm->cred->egid is removed from brpm_fill_uid. A small comment to document that bprm_fill_uid now only deals with the work to handle suid and sgid files. The default case is already heandled by prepare_exec_creds. The function security_bprm_repopulate_creds is renamed security_bprm_creds_from_file and now is explicitly passed the file from which to compute the creds. The documentation of the bprm_creds_from_file security hook is updated to explain when the hook is called and what it needs to do. The file is passed from cap_bprm_creds_from_file into get_file_caps so that the caps are computed for the appropriate file. The now unnecessary work in cap_bprm_creds_from_file to reset the ambient capabilites has been removed. A small comment to document that the work of cap_bprm_creds_from_file is to read capabilities from the files secureity attribute and derive capabilities from the fact the user had uid 0 has been added. Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-05-30 03:00:54 +00:00
/* Once we are committed compute the creds */
retval = bprm_creds_from_file(bprm);
if (retval)
return retval;
/*
* Ensure all future errors are fatal.
*/
bprm->point_of_no_return = true;
/*
* Make this the only thread in the thread group.
*/
retval = de_thread(me);
if (retval)
goto out;
/*
* Cancel any io_uring activity across execve
*/
io_uring_task_cancel();
exec: Move unshare_files to fix posix file locking during exec Many moons ago the binfmts were doing some very questionable things with file descriptors and an unsharing of the file descriptor table was added to make things better[1][2]. The helper steal_lockss was added to avoid breaking the userspace programs[3][4][6]. Unfortunately it turned out that steal_locks did not work for network file systems[5], so it was removed to see if anyone would complain[7][8]. It was thought at the time that NPTL would not be affected as the unshare_files happened after the other threads were killed[8]. Unfortunately because there was an unshare_files in binfmt_elf.c before the threads were killed this analysis was incorrect. This unshare_files in binfmt_elf.c resulted in the unshares_files happening whenever threads were present. Which led to unshare_files being moved to the start of do_execve[9]. Later the problems were rediscovered and the suggested approach was to readd steal_locks under a different name[10]. I happened to be reviewing patches and I noticed that this approach was a step backwards[11]. I proposed simply moving unshare_files[12] and it was pointed out that moving unshare_files without auditing the code was also unsafe[13]. There were then several attempts to solve this[14][15][16] and I even posted this set of changes[17]. Unfortunately because auditing all of execve is time consuming this change did not make it in at the time. Well now that I am cleaning up exec I have made the time to read through all of the binfmts and the only playing with file descriptors is either the security modules closing them in security_bprm_committing_creds or is in the generic code in fs/exec.c. None of it happens before begin_new_exec is called. So move unshare_files into begin_new_exec, after the point of no return. If memory is very very very low and the application calling exec is sharing file descriptor tables between processes we might fail past the point of no return. Which is unfortunate but no different than any of the other places where we allocate memory after the point of no return. This movement allows another process that shares the file table, or another thread of the same process and that closes files or changes their close on exec behavior and races with execve to cause some unexpected things to happen. There is only one time of check to time of use race and it is just there so that execve fails instead of an interpreter failing when it tries to open the file it is supposed to be interpreting. Failing later if userspace is being silly is not a problem. With this change it the following discription from the removal of steal_locks[8] finally becomes true. Apps using NPTL are not affected, since all other threads are killed before execve. Apps using LinuxThreads are only affected if they - have multiple threads during exec (LinuxThreads doesn't kill other threads, the app may do it with pthread_kill_other_threads_np()) - rely on POSIX locks being inherited across exec Both conditions are documented, but not their interaction. Apps using clone() natively are affected if they - use clone(CLONE_FILES) - rely on POSIX locks being inherited across exec I have investigated some paths to make it possible to solve this without moving unshare_files but they all look more complicated[18]. Reported-by: Daniel P. Berrangé <berrange@redhat.com> Reported-by: Jeff Layton <jlayton@redhat.com> History-tree: git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git [1] 02cda956de0b ("[PATCH] unshare_files" [2] 04e9bcb4d106 ("[PATCH] use new unshare_files helper") [3] 088f5d7244de ("[PATCH] add steal_locks helper") [4] 02c541ec8ffa ("[PATCH] use new steal_locks helper") [5] https://lkml.kernel.org/r/E1FLIlF-0007zR-00@dorka.pomaz.szeredi.hu [6] https://lkml.kernel.org/r/0060321191605.GB15997@sorel.sous-sol.org [7] https://lkml.kernel.org/r/E1FLwjC-0000kJ-00@dorka.pomaz.szeredi.hu [8] c89681ed7d0e ("[PATCH] remove steal_locks()") [9] fd8328be874f ("[PATCH] sanitize handling of shared descriptor tables in failing execve()") [10] https://lkml.kernel.org/r/20180317142520.30520-1-jlayton@kernel.org [11] https://lkml.kernel.org/r/87r2nwqk73.fsf@xmission.com [12] https://lkml.kernel.org/r/87bmfgvg8w.fsf@xmission.com [13] https://lkml.kernel.org/r/20180322111424.GE30522@ZenIV.linux.org.uk [14] https://lkml.kernel.org/r/20180827174722.3723-1-jlayton@kernel.org [15] https://lkml.kernel.org/r/20180830172423.21964-1-jlayton@kernel.org [16] https://lkml.kernel.org/r/20180914105310.6454-1-jlayton@kernel.org [17] https://lkml.kernel.org/r/87a7ohs5ow.fsf@xmission.com [18] https://lkml.kernel.org/r/87pn8c1uj6.fsf_-_@x220.int.ebiederm.org Acked-by: Christian Brauner <christian.brauner@ubuntu.com> v1: https://lkml.kernel.org/r/20200817220425.9389-1-ebiederm@xmission.com Link: https://lkml.kernel.org/r/20201120231441.29911-1-ebiederm@xmission.com Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2020-11-20 23:14:18 +00:00
/* Ensure the files table is not shared. */
retval = unshare_files();
exec: Move unshare_files to fix posix file locking during exec Many moons ago the binfmts were doing some very questionable things with file descriptors and an unsharing of the file descriptor table was added to make things better[1][2]. The helper steal_lockss was added to avoid breaking the userspace programs[3][4][6]. Unfortunately it turned out that steal_locks did not work for network file systems[5], so it was removed to see if anyone would complain[7][8]. It was thought at the time that NPTL would not be affected as the unshare_files happened after the other threads were killed[8]. Unfortunately because there was an unshare_files in binfmt_elf.c before the threads were killed this analysis was incorrect. This unshare_files in binfmt_elf.c resulted in the unshares_files happening whenever threads were present. Which led to unshare_files being moved to the start of do_execve[9]. Later the problems were rediscovered and the suggested approach was to readd steal_locks under a different name[10]. I happened to be reviewing patches and I noticed that this approach was a step backwards[11]. I proposed simply moving unshare_files[12] and it was pointed out that moving unshare_files without auditing the code was also unsafe[13]. There were then several attempts to solve this[14][15][16] and I even posted this set of changes[17]. Unfortunately because auditing all of execve is time consuming this change did not make it in at the time. Well now that I am cleaning up exec I have made the time to read through all of the binfmts and the only playing with file descriptors is either the security modules closing them in security_bprm_committing_creds or is in the generic code in fs/exec.c. None of it happens before begin_new_exec is called. So move unshare_files into begin_new_exec, after the point of no return. If memory is very very very low and the application calling exec is sharing file descriptor tables between processes we might fail past the point of no return. Which is unfortunate but no different than any of the other places where we allocate memory after the point of no return. This movement allows another process that shares the file table, or another thread of the same process and that closes files or changes their close on exec behavior and races with execve to cause some unexpected things to happen. There is only one time of check to time of use race and it is just there so that execve fails instead of an interpreter failing when it tries to open the file it is supposed to be interpreting. Failing later if userspace is being silly is not a problem. With this change it the following discription from the removal of steal_locks[8] finally becomes true. Apps using NPTL are not affected, since all other threads are killed before execve. Apps using LinuxThreads are only affected if they - have multiple threads during exec (LinuxThreads doesn't kill other threads, the app may do it with pthread_kill_other_threads_np()) - rely on POSIX locks being inherited across exec Both conditions are documented, but not their interaction. Apps using clone() natively are affected if they - use clone(CLONE_FILES) - rely on POSIX locks being inherited across exec I have investigated some paths to make it possible to solve this without moving unshare_files but they all look more complicated[18]. Reported-by: Daniel P. Berrangé <berrange@redhat.com> Reported-by: Jeff Layton <jlayton@redhat.com> History-tree: git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git [1] 02cda956de0b ("[PATCH] unshare_files" [2] 04e9bcb4d106 ("[PATCH] use new unshare_files helper") [3] 088f5d7244de ("[PATCH] add steal_locks helper") [4] 02c541ec8ffa ("[PATCH] use new steal_locks helper") [5] https://lkml.kernel.org/r/E1FLIlF-0007zR-00@dorka.pomaz.szeredi.hu [6] https://lkml.kernel.org/r/0060321191605.GB15997@sorel.sous-sol.org [7] https://lkml.kernel.org/r/E1FLwjC-0000kJ-00@dorka.pomaz.szeredi.hu [8] c89681ed7d0e ("[PATCH] remove steal_locks()") [9] fd8328be874f ("[PATCH] sanitize handling of shared descriptor tables in failing execve()") [10] https://lkml.kernel.org/r/20180317142520.30520-1-jlayton@kernel.org [11] https://lkml.kernel.org/r/87r2nwqk73.fsf@xmission.com [12] https://lkml.kernel.org/r/87bmfgvg8w.fsf@xmission.com [13] https://lkml.kernel.org/r/20180322111424.GE30522@ZenIV.linux.org.uk [14] https://lkml.kernel.org/r/20180827174722.3723-1-jlayton@kernel.org [15] https://lkml.kernel.org/r/20180830172423.21964-1-jlayton@kernel.org [16] https://lkml.kernel.org/r/20180914105310.6454-1-jlayton@kernel.org [17] https://lkml.kernel.org/r/87a7ohs5ow.fsf@xmission.com [18] https://lkml.kernel.org/r/87pn8c1uj6.fsf_-_@x220.int.ebiederm.org Acked-by: Christian Brauner <christian.brauner@ubuntu.com> v1: https://lkml.kernel.org/r/20200817220425.9389-1-ebiederm@xmission.com Link: https://lkml.kernel.org/r/20201120231441.29911-1-ebiederm@xmission.com Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2020-11-20 23:14:18 +00:00
if (retval)
goto out;
/*
* Must be called _before_ exec_mmap() as bprm->mm is
* not visibile until then. This also enables the update
* to be lockless.
*/
retval = set_mm_exe_file(bprm->mm, bprm->file);
if (retval)
goto out;
/* If the binary is not readable then enforce mm->dumpable=0 */
would_dump(bprm, bprm->file);
if (bprm->have_execfd)
would_dump(bprm, bprm->executable);
/*
* Release all of the old mmap stuff
*/
acct_arg_size(bprm, 0);
retval = exec_mmap(bprm->mm);
if (retval)
goto out;
bprm->mm = NULL;
#ifdef CONFIG_POSIX_TIMERS
exit_itimers(me->signal);
flush_itimer_signals();
#endif
/*
* Make the signal table private.
*/
retval = unshare_sighand(me);
if (retval)
goto out_unlock;
/*
* Ensure that the uaccess routines can actually operate on userspace
* pointers:
*/
force_uaccess_begin();
me->flags &= ~(PF_RANDOMIZE | PF_FORKNOEXEC | PF_KTHREAD |
PF_NOFREEZE | PF_NO_SETAFFINITY);
flush_thread();
me->personality &= ~bprm->per_clear;
kernel: Implement selective syscall userspace redirection Introduce a mechanism to quickly disable/enable syscall handling for a specific process and redirect to userspace via SIGSYS. This is useful for processes with parts that require syscall redirection and parts that don't, but who need to perform this boundary crossing really fast, without paying the cost of a system call to reconfigure syscall handling on each boundary transition. This is particularly important for Windows games running over Wine. The proposed interface looks like this: prctl(PR_SET_SYSCALL_USER_DISPATCH, <op>, <off>, <length>, [selector]) The range [<offset>,<offset>+<length>) is a part of the process memory map that is allowed to by-pass the redirection code and dispatch syscalls directly, such that in fast paths a process doesn't need to disable the trap nor the kernel has to check the selector. This is essential to return from SIGSYS to a blocked area without triggering another SIGSYS from rt_sigreturn. selector is an optional pointer to a char-sized userspace memory region that has a key switch for the mechanism. This key switch is set to either PR_SYS_DISPATCH_ON, PR_SYS_DISPATCH_OFF to enable and disable the redirection without calling the kernel. The feature is meant to be set per-thread and it is disabled on fork/clone/execv. Internally, this doesn't add overhead to the syscall hot path, and it requires very little per-architecture support. I avoided using seccomp, even though it duplicates some functionality, due to previous feedback that maybe it shouldn't mix with seccomp since it is not a security mechanism. And obviously, this should never be considered a security mechanism, since any part of the program can by-pass it by using the syscall dispatcher. For the sysinfo benchmark, which measures the overhead added to executing a native syscall that doesn't require interception, the overhead using only the direct dispatcher region to issue syscalls is pretty much irrelevant. The overhead of using the selector goes around 40ns for a native (unredirected) syscall in my system, and it is (as expected) dominated by the supervisor-mode user-address access. In fact, with SMAP off, the overhead is consistently less than 5ns on my test box. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andy Lutomirski <luto@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20201127193238.821364-4-krisman@collabora.com
2020-11-27 19:32:34 +00:00
clear_syscall_work_syscall_user_dispatch(me);
fs: exec: apply CLOEXEC before changing dumpable task flags If you have a process that has set itself to be non-dumpable, and it then undergoes exec(2), any CLOEXEC file descriptors it has open are "exposed" during a race window between the dumpable flags of the process being reset for exec(2) and CLOEXEC being applied to the file descriptors. This can be exploited by a process by attempting to access /proc/<pid>/fd/... during this window, without requiring CAP_SYS_PTRACE. The race in question is after set_dumpable has been (for get_link, though the trace is basically the same for readlink): [vfs] -> proc_pid_link_inode_operations.get_link -> proc_pid_get_link -> proc_fd_access_allowed -> ptrace_may_access(task, PTRACE_MODE_READ_FSCREDS); Which will return 0, during the race window and CLOEXEC file descriptors will still be open during this window because do_close_on_exec has not been called yet. As a result, the ordering of these calls should be reversed to avoid this race window. This is of particular concern to container runtimes, where joining a PID namespace with file descriptors referring to the host filesystem can result in security issues (since PRCTL_SET_DUMPABLE doesn't protect against access of CLOEXEC file descriptors -- file descriptors which may reference filesystem objects the container shouldn't have access to). Cc: dev@opencontainers.org Cc: <stable@vger.kernel.org> # v3.2+ Reported-by: Michael Crosby <crosbymichael@gmail.com> Signed-off-by: Aleksa Sarai <asarai@suse.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-12-21 05:26:24 +00:00
/*
* We have to apply CLOEXEC before we change whether the process is
* dumpable (in setup_new_exec) to avoid a race with a process in userspace
* trying to access the should-be-closed file descriptors of a process
* undergoing exec(2).
*/
do_close_on_exec(me->files);
if (bprm->secureexec) {
/* Make sure parent cannot signal privileged process. */
me->pdeath_signal = 0;
/*
* For secureexec, reset the stack limit to sane default to
* avoid bad behavior from the prior rlimits. This has to
* happen before arch_pick_mmap_layout(), which examines
* RLIMIT_STACK, but after the point of no return to avoid
* needing to clean up the change on failure.
*/
if (bprm->rlim_stack.rlim_cur > _STK_LIM)
bprm->rlim_stack.rlim_cur = _STK_LIM;
}
me->sas_ss_sp = me->sas_ss_size = 0;
/*
* Figure out dumpability. Note that this checking only of current
* is wrong, but userspace depends on it. This should be testing
* bprm->secureexec instead.
*/
if (bprm->interp_flags & BINPRM_FLAGS_ENFORCE_NONDUMP ||
!(uid_eq(current_euid(), current_uid()) &&
gid_eq(current_egid(), current_gid())))
set_dumpable(current->mm, suid_dumpable);
else
set_dumpable(current->mm, SUID_DUMP_USER);
[PATCH] setuid core dump Add a new `suid_dumpable' sysctl: This value can be used to query and set the core dump mode for setuid or otherwise protected/tainted binaries. The modes are 0 - (default) - traditional behaviour. Any process which has changed privilege levels or is execute only will not be dumped 1 - (debug) - all processes dump core when possible. The core dump is owned by the current user and no security is applied. This is intended for system debugging situations only. Ptrace is unchecked. 2 - (suidsafe) - any binary which normally would not be dumped is dumped readable by root only. This allows the end user to remove such a dump but not access it directly. For security reasons core dumps in this mode will not overwrite one another or other files. This mode is appropriate when adminstrators are attempting to debug problems in a normal environment. (akpm: > > +EXPORT_SYMBOL(suid_dumpable); > > EXPORT_SYMBOL_GPL? No problem to me. > > if (current->euid == current->uid && current->egid == current->gid) > > current->mm->dumpable = 1; > > Should this be SUID_DUMP_USER? Actually the feedback I had from last time was that the SUID_ defines should go because its clearer to follow the numbers. They can go everywhere (and there are lots of places where dumpable is tested/used as a bool in untouched code) > Maybe this should be renamed to `dump_policy' or something. Doing that > would help us catch any code which isn't using the #defines, too. Fair comment. The patch was designed to be easy to maintain for Red Hat rather than for merging. Changing that field would create a gigantic diff because it is used all over the place. ) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 07:09:43 +00:00
perf_event_exec();
__set_task_comm(me, kbasename(bprm->filename), true);
/* An exec changes our domain. We are no longer part of the thread
group */
WRITE_ONCE(me->self_exec_id, me->self_exec_id + 1);
flush_signal_handlers(me, 0);
retval = set_cred_ucounts(bprm->cred);
if (retval < 0)
goto out_unlock;
/*
* install the new credentials for this executable
*/
security_bprm_committing_creds(bprm);
commit_creds(bprm->cred);
bprm->cred = NULL;
/*
* Disable monitoring for regular users
* when executing setuid binaries. Must
* wait until new credentials are committed
* by commit_creds() above
*/
if (get_dumpable(me->mm) != SUID_DUMP_USER)
perf_event_exit_task(me);
/*
* cred_guard_mutex must be held at least to this point to prevent
* ptrace_attach() from altering our determination of the task's
* credentials; any time after this it may be unlocked.
*/
security_bprm_committed_creds(bprm);
/* Pass the opened binary to the interpreter. */
if (bprm->have_execfd) {
retval = get_unused_fd_flags(0);
if (retval < 0)
goto out_unlock;
fd_install(retval, bprm->executable);
bprm->executable = NULL;
bprm->execfd = retval;
}
return 0;
exec: Move most of setup_new_exec into flush_old_exec The current idiom for the callers is: flush_old_exec(bprm); set_personality(...); setup_new_exec(bprm); In 2010 Linus split flush_old_exec into flush_old_exec and setup_new_exec. With the intention that setup_new_exec be what is called after the processes new personality is set. Move the code that doesn't depend upon the personality from setup_new_exec into flush_old_exec. This is to facilitate future changes by having as much code together in one function as possible. To see why it is safe to move this code please note that effectively this change moves the personality setting in the binfmt and the following three lines of code after everything except unlocking the mutexes: arch_pick_mmap_layout arch_setup_new_exec mm->task_size = TASK_SIZE The function arch_pick_mmap_layout at most sets: mm->get_unmapped_area mm->mmap_base mm->mmap_legacy_base mm->mmap_compat_base mm->mmap_compat_legacy_base which nothing in flush_old_exec or setup_new_exec depends on. The function arch_setup_new_exec only sets architecture specific state and the rest of the functions only deal in state that applies to all architectures. The last line just sets mm->task_size and again nothing in flush_old_exec or setup_new_exec depend on task_size. Ref: 221af7f87b97 ("Split 'flush_old_exec' into two functions") Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-05-03 12:15:28 +00:00
out_unlock:
exec: Transform exec_update_mutex into a rw_semaphore Recently syzbot reported[0] that there is a deadlock amongst the users of exec_update_mutex. The problematic lock ordering found by lockdep was: perf_event_open (exec_update_mutex -> ovl_i_mutex) chown (ovl_i_mutex -> sb_writes) sendfile (sb_writes -> p->lock) by reading from a proc file and writing to overlayfs proc_pid_syscall (p->lock -> exec_update_mutex) While looking at possible solutions it occured to me that all of the users and possible users involved only wanted to state of the given process to remain the same. They are all readers. The only writer is exec. There is no reason for readers to block on each other. So fix this deadlock by transforming exec_update_mutex into a rw_semaphore named exec_update_lock that only exec takes for writing. Cc: Jann Horn <jannh@google.com> Cc: Vasiliy Kulikov <segoon@openwall.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Bernd Edlinger <bernd.edlinger@hotmail.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Christopher Yeoh <cyeoh@au1.ibm.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Fixes: eea9673250db ("exec: Add exec_update_mutex to replace cred_guard_mutex") [0] https://lkml.kernel.org/r/00000000000063640c05ade8e3de@google.com Reported-by: syzbot+db9cdf3dd1f64252c6ef@syzkaller.appspotmail.com Link: https://lkml.kernel.org/r/87ft4mbqen.fsf@x220.int.ebiederm.org Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2020-12-03 20:12:00 +00:00
up_write(&me->signal->exec_update_lock);
out:
return retval;
}
EXPORT_SYMBOL(begin_new_exec);
void would_dump(struct linux_binprm *bprm, struct file *file)
{
struct inode *inode = file_inode(file);
struct user_namespace *mnt_userns = file_mnt_user_ns(file);
if (inode_permission(mnt_userns, inode, MAY_READ) < 0) {
struct user_namespace *old, *user_ns;
bprm->interp_flags |= BINPRM_FLAGS_ENFORCE_NONDUMP;
/* Ensure mm->user_ns contains the executable */
user_ns = old = bprm->mm->user_ns;
while ((user_ns != &init_user_ns) &&
!privileged_wrt_inode_uidgid(user_ns, mnt_userns, inode))
user_ns = user_ns->parent;
if (old != user_ns) {
bprm->mm->user_ns = get_user_ns(user_ns);
put_user_ns(old);
}
}
}
EXPORT_SYMBOL(would_dump);
void setup_new_exec(struct linux_binprm * bprm)
{
exec: Move most of setup_new_exec into flush_old_exec The current idiom for the callers is: flush_old_exec(bprm); set_personality(...); setup_new_exec(bprm); In 2010 Linus split flush_old_exec into flush_old_exec and setup_new_exec. With the intention that setup_new_exec be what is called after the processes new personality is set. Move the code that doesn't depend upon the personality from setup_new_exec into flush_old_exec. This is to facilitate future changes by having as much code together in one function as possible. To see why it is safe to move this code please note that effectively this change moves the personality setting in the binfmt and the following three lines of code after everything except unlocking the mutexes: arch_pick_mmap_layout arch_setup_new_exec mm->task_size = TASK_SIZE The function arch_pick_mmap_layout at most sets: mm->get_unmapped_area mm->mmap_base mm->mmap_legacy_base mm->mmap_compat_base mm->mmap_compat_legacy_base which nothing in flush_old_exec or setup_new_exec depends on. The function arch_setup_new_exec only sets architecture specific state and the rest of the functions only deal in state that applies to all architectures. The last line just sets mm->task_size and again nothing in flush_old_exec or setup_new_exec depend on task_size. Ref: 221af7f87b97 ("Split 'flush_old_exec' into two functions") Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-05-03 12:15:28 +00:00
/* Setup things that can depend upon the personality */
struct task_struct *me = current;
exec: Move most of setup_new_exec into flush_old_exec The current idiom for the callers is: flush_old_exec(bprm); set_personality(...); setup_new_exec(bprm); In 2010 Linus split flush_old_exec into flush_old_exec and setup_new_exec. With the intention that setup_new_exec be what is called after the processes new personality is set. Move the code that doesn't depend upon the personality from setup_new_exec into flush_old_exec. This is to facilitate future changes by having as much code together in one function as possible. To see why it is safe to move this code please note that effectively this change moves the personality setting in the binfmt and the following three lines of code after everything except unlocking the mutexes: arch_pick_mmap_layout arch_setup_new_exec mm->task_size = TASK_SIZE The function arch_pick_mmap_layout at most sets: mm->get_unmapped_area mm->mmap_base mm->mmap_legacy_base mm->mmap_compat_base mm->mmap_compat_legacy_base which nothing in flush_old_exec or setup_new_exec depends on. The function arch_setup_new_exec only sets architecture specific state and the rest of the functions only deal in state that applies to all architectures. The last line just sets mm->task_size and again nothing in flush_old_exec or setup_new_exec depend on task_size. Ref: 221af7f87b97 ("Split 'flush_old_exec' into two functions") Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-05-03 12:15:28 +00:00
arch_pick_mmap_layout(me->mm, &bprm->rlim_stack);
[PATCH] setuid core dump Add a new `suid_dumpable' sysctl: This value can be used to query and set the core dump mode for setuid or otherwise protected/tainted binaries. The modes are 0 - (default) - traditional behaviour. Any process which has changed privilege levels or is execute only will not be dumped 1 - (debug) - all processes dump core when possible. The core dump is owned by the current user and no security is applied. This is intended for system debugging situations only. Ptrace is unchecked. 2 - (suidsafe) - any binary which normally would not be dumped is dumped readable by root only. This allows the end user to remove such a dump but not access it directly. For security reasons core dumps in this mode will not overwrite one another or other files. This mode is appropriate when adminstrators are attempting to debug problems in a normal environment. (akpm: > > +EXPORT_SYMBOL(suid_dumpable); > > EXPORT_SYMBOL_GPL? No problem to me. > > if (current->euid == current->uid && current->egid == current->gid) > > current->mm->dumpable = 1; > > Should this be SUID_DUMP_USER? Actually the feedback I had from last time was that the SUID_ defines should go because its clearer to follow the numbers. They can go everywhere (and there are lots of places where dumpable is tested/used as a bool in untouched code) > Maybe this should be renamed to `dump_policy' or something. Doing that > would help us catch any code which isn't using the #defines, too. Fair comment. The patch was designed to be easy to maintain for Red Hat rather than for merging. Changing that field would create a gigantic diff because it is used all over the place. ) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 07:09:43 +00:00
x86/arch_prctl: Add ARCH_[GET|SET]_CPUID Intel supports faulting on the CPUID instruction beginning with Ivy Bridge. When enabled, the processor will fault on attempts to execute the CPUID instruction with CPL>0. Exposing this feature to userspace will allow a ptracer to trap and emulate the CPUID instruction. When supported, this feature is controlled by toggling bit 0 of MSR_MISC_FEATURES_ENABLES. It is documented in detail in Section 2.3.2 of https://bugzilla.kernel.org/attachment.cgi?id=243991 Implement a new pair of arch_prctls, available on both x86-32 and x86-64. ARCH_GET_CPUID: Returns the current CPUID state, either 0 if CPUID faulting is enabled (and thus the CPUID instruction is not available) or 1 if CPUID faulting is not enabled. ARCH_SET_CPUID: Set the CPUID state to the second argument. If cpuid_enabled is 0 CPUID faulting will be activated, otherwise it will be deactivated. Returns ENODEV if CPUID faulting is not supported on this system. The state of the CPUID faulting flag is propagated across forks, but reset upon exec. Signed-off-by: Kyle Huey <khuey@kylehuey.com> Cc: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com> Cc: kvm@vger.kernel.org Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: linux-kselftest@vger.kernel.org Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Robert O'Callahan <robert@ocallahan.org> Cc: Richard Weinberger <richard@nod.at> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Len Brown <len.brown@intel.com> Cc: Shuah Khan <shuah@kernel.org> Cc: user-mode-linux-devel@lists.sourceforge.net Cc: Jeff Dike <jdike@addtoit.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: user-mode-linux-user@lists.sourceforge.net Cc: David Matlack <dmatlack@google.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dmitry Safonov <dsafonov@virtuozzo.com> Cc: linux-fsdevel@vger.kernel.org Cc: Paolo Bonzini <pbonzini@redhat.com> Link: http://lkml.kernel.org/r/20170320081628.18952-9-khuey@kylehuey.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-20 08:16:26 +00:00
arch_setup_new_exec();
/* Set the new mm task size. We have to do that late because it may
* depend on TIF_32BIT which is only updated in flush_thread() on
* some architectures like powerpc
*/
exec: Move most of setup_new_exec into flush_old_exec The current idiom for the callers is: flush_old_exec(bprm); set_personality(...); setup_new_exec(bprm); In 2010 Linus split flush_old_exec into flush_old_exec and setup_new_exec. With the intention that setup_new_exec be what is called after the processes new personality is set. Move the code that doesn't depend upon the personality from setup_new_exec into flush_old_exec. This is to facilitate future changes by having as much code together in one function as possible. To see why it is safe to move this code please note that effectively this change moves the personality setting in the binfmt and the following three lines of code after everything except unlocking the mutexes: arch_pick_mmap_layout arch_setup_new_exec mm->task_size = TASK_SIZE The function arch_pick_mmap_layout at most sets: mm->get_unmapped_area mm->mmap_base mm->mmap_legacy_base mm->mmap_compat_base mm->mmap_compat_legacy_base which nothing in flush_old_exec or setup_new_exec depends on. The function arch_setup_new_exec only sets architecture specific state and the rest of the functions only deal in state that applies to all architectures. The last line just sets mm->task_size and again nothing in flush_old_exec or setup_new_exec depend on task_size. Ref: 221af7f87b97 ("Split 'flush_old_exec' into two functions") Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-05-03 12:15:28 +00:00
me->mm->task_size = TASK_SIZE;
exec: Transform exec_update_mutex into a rw_semaphore Recently syzbot reported[0] that there is a deadlock amongst the users of exec_update_mutex. The problematic lock ordering found by lockdep was: perf_event_open (exec_update_mutex -> ovl_i_mutex) chown (ovl_i_mutex -> sb_writes) sendfile (sb_writes -> p->lock) by reading from a proc file and writing to overlayfs proc_pid_syscall (p->lock -> exec_update_mutex) While looking at possible solutions it occured to me that all of the users and possible users involved only wanted to state of the given process to remain the same. They are all readers. The only writer is exec. There is no reason for readers to block on each other. So fix this deadlock by transforming exec_update_mutex into a rw_semaphore named exec_update_lock that only exec takes for writing. Cc: Jann Horn <jannh@google.com> Cc: Vasiliy Kulikov <segoon@openwall.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Bernd Edlinger <bernd.edlinger@hotmail.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Christopher Yeoh <cyeoh@au1.ibm.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Fixes: eea9673250db ("exec: Add exec_update_mutex to replace cred_guard_mutex") [0] https://lkml.kernel.org/r/00000000000063640c05ade8e3de@google.com Reported-by: syzbot+db9cdf3dd1f64252c6ef@syzkaller.appspotmail.com Link: https://lkml.kernel.org/r/87ft4mbqen.fsf@x220.int.ebiederm.org Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2020-12-03 20:12:00 +00:00
up_write(&me->signal->exec_update_lock);
mutex_unlock(&me->signal->cred_guard_mutex);
}
EXPORT_SYMBOL(setup_new_exec);
/* Runs immediately before start_thread() takes over. */
void finalize_exec(struct linux_binprm *bprm)
{
/* Store any stack rlimit changes before starting thread. */
task_lock(current->group_leader);
current->signal->rlim[RLIMIT_STACK] = bprm->rlim_stack;
task_unlock(current->group_leader);
}
EXPORT_SYMBOL(finalize_exec);
2009-09-05 18:17:13 +00:00
/*
* Prepare credentials and lock ->cred_guard_mutex.
* setup_new_exec() commits the new creds and drops the lock.
* Or, if exec fails before, free_bprm() should release ->cred
2009-09-05 18:17:13 +00:00
* and unlock.
*/
static int prepare_bprm_creds(struct linux_binprm *bprm)
2009-09-05 18:17:13 +00:00
{
if (mutex_lock_interruptible(&current->signal->cred_guard_mutex))
2009-09-05 18:17:13 +00:00
return -ERESTARTNOINTR;
bprm->cred = prepare_exec_creds();
if (likely(bprm->cred))
return 0;
mutex_unlock(&current->signal->cred_guard_mutex);
2009-09-05 18:17:13 +00:00
return -ENOMEM;
}
static void free_bprm(struct linux_binprm *bprm)
2009-09-05 18:17:13 +00:00
{
exec: Move bprm_mm_init into alloc_bprm Currently it is necessary for the usermode helper code and the code that launches init to use set_fs so that pages coming from the kernel look like they are coming from userspace. To allow that usage of set_fs to be removed cleanly the argument copying from userspace needs to happen earlier. Move the allocation and initialization of bprm->mm into alloc_bprm so that the bprm->mm is available early to store the new user stack into. This is a prerequisite for copying argv and envp into the new user stack early before ther rest of exec. To keep the things consistent the cleanup of bprm->mm is moved into free_bprm. So that bprm->mm will be cleaned up whenever bprm->mm is allocated and free_bprm are called. Moving bprm_mm_init earlier is safe as it does not depend on any files, current->in_execve, current->fs->in_exec, bprm->unsafe, or the if the file table is shared. (AKA bprm_mm_init does not depend on any of the code that happens between alloc_bprm and where it was previously called.) This moves bprm->mm cleanup after current->fs->in_exec is set to 0. This is safe because current->fs->in_exec is only used to preventy taking an additional reference on the fs_struct. This moves bprm->mm cleanup after current->in_execve is set to 0. This is safe because current->in_execve is only used by the lsms (apparmor and tomoyou) and always for LSM specific functions, never for anything to do with the mm. This adds bprm->mm cleanup into the successful return path. This is safe because being on the successful return path implies that begin_new_exec succeeded and set brpm->mm to NULL. As bprm->mm is NULL bprm cleanup I am moving into free_bprm will do nothing. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lkml.kernel.org/r/87eepe6x7p.fsf@x220.int.ebiederm.org Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-07-10 20:54:54 +00:00
if (bprm->mm) {
acct_arg_size(bprm, 0);
mmput(bprm->mm);
}
2009-09-05 18:17:13 +00:00
free_arg_pages(bprm);
if (bprm->cred) {
mutex_unlock(&current->signal->cred_guard_mutex);
2009-09-05 18:17:13 +00:00
abort_creds(bprm->cred);
}
if (bprm->file) {
allow_write_access(bprm->file);
fput(bprm->file);
}
if (bprm->executable)
fput(bprm->executable);
exec: do not leave bprm->interp on stack If a series of scripts are executed, each triggering module loading via unprintable bytes in the script header, kernel stack contents can leak into the command line. Normally execution of binfmt_script and binfmt_misc happens recursively. However, when modules are enabled, and unprintable bytes exist in the bprm->buf, execution will restart after attempting to load matching binfmt modules. Unfortunately, the logic in binfmt_script and binfmt_misc does not expect to get restarted. They leave bprm->interp pointing to their local stack. This means on restart bprm->interp is left pointing into unused stack memory which can then be copied into the userspace argv areas. After additional study, it seems that both recursion and restart remains the desirable way to handle exec with scripts, misc, and modules. As such, we need to protect the changes to interp. This changes the logic to require allocation for any changes to the bprm->interp. To avoid adding a new kmalloc to every exec, the default value is left as-is. Only when passing through binfmt_script or binfmt_misc does an allocation take place. For a proof of concept, see DoTest.sh from: http://www.halfdog.net/Security/2012/LinuxKernelBinfmtScriptStackDataDisclosure/ Signed-off-by: Kees Cook <keescook@chromium.org> Cc: halfdog <me@halfdog.net> Cc: P J P <ppandit@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-20 23:05:16 +00:00
/* If a binfmt changed the interp, free it. */
if (bprm->interp != bprm->filename)
kfree(bprm->interp);
exec: Move initialization of bprm->filename into alloc_bprm Currently it is necessary for the usermode helper code and the code that launches init to use set_fs so that pages coming from the kernel look like they are coming from userspace. To allow that usage of set_fs to be removed cleanly the argument copying from userspace needs to happen earlier. Move the computation of bprm->filename and possible allocation of a name in the case of execveat into alloc_bprm to make that possible. The exectuable name, the arguments, and the environment are copied into the new usermode stack which is stored in bprm until exec passes the point of no return. As the executable name is copied first onto the usermode stack it needs to be known. As there are no dependencies to computing the executable name, compute it early in alloc_bprm. As an implementation detail if the filename needs to be generated because it embeds a file descriptor store that filename in a new field bprm->fdpath, and free it in free_bprm. Previously this was done in an independent variable pathbuf. I have renamed pathbuf fdpath because fdpath is more suggestive of what kind of path is in the variable. I moved fdpath into struct linux_binprm because it is tightly tied to the other variables in struct linux_binprm, and as such is needed to allow the call alloc_binprm to move. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lkml.kernel.org/r/87k0z66x8f.fsf@x220.int.ebiederm.org Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-07-11 13:16:15 +00:00
kfree(bprm->fdpath);
2009-09-05 18:17:13 +00:00
kfree(bprm);
}
exec: Move initialization of bprm->filename into alloc_bprm Currently it is necessary for the usermode helper code and the code that launches init to use set_fs so that pages coming from the kernel look like they are coming from userspace. To allow that usage of set_fs to be removed cleanly the argument copying from userspace needs to happen earlier. Move the computation of bprm->filename and possible allocation of a name in the case of execveat into alloc_bprm to make that possible. The exectuable name, the arguments, and the environment are copied into the new usermode stack which is stored in bprm until exec passes the point of no return. As the executable name is copied first onto the usermode stack it needs to be known. As there are no dependencies to computing the executable name, compute it early in alloc_bprm. As an implementation detail if the filename needs to be generated because it embeds a file descriptor store that filename in a new field bprm->fdpath, and free it in free_bprm. Previously this was done in an independent variable pathbuf. I have renamed pathbuf fdpath because fdpath is more suggestive of what kind of path is in the variable. I moved fdpath into struct linux_binprm because it is tightly tied to the other variables in struct linux_binprm, and as such is needed to allow the call alloc_binprm to move. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lkml.kernel.org/r/87k0z66x8f.fsf@x220.int.ebiederm.org Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-07-11 13:16:15 +00:00
static struct linux_binprm *alloc_bprm(int fd, struct filename *filename)
{
struct linux_binprm *bprm = kzalloc(sizeof(*bprm), GFP_KERNEL);
exec: Move initialization of bprm->filename into alloc_bprm Currently it is necessary for the usermode helper code and the code that launches init to use set_fs so that pages coming from the kernel look like they are coming from userspace. To allow that usage of set_fs to be removed cleanly the argument copying from userspace needs to happen earlier. Move the computation of bprm->filename and possible allocation of a name in the case of execveat into alloc_bprm to make that possible. The exectuable name, the arguments, and the environment are copied into the new usermode stack which is stored in bprm until exec passes the point of no return. As the executable name is copied first onto the usermode stack it needs to be known. As there are no dependencies to computing the executable name, compute it early in alloc_bprm. As an implementation detail if the filename needs to be generated because it embeds a file descriptor store that filename in a new field bprm->fdpath, and free it in free_bprm. Previously this was done in an independent variable pathbuf. I have renamed pathbuf fdpath because fdpath is more suggestive of what kind of path is in the variable. I moved fdpath into struct linux_binprm because it is tightly tied to the other variables in struct linux_binprm, and as such is needed to allow the call alloc_binprm to move. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lkml.kernel.org/r/87k0z66x8f.fsf@x220.int.ebiederm.org Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-07-11 13:16:15 +00:00
int retval = -ENOMEM;
if (!bprm)
exec: Move initialization of bprm->filename into alloc_bprm Currently it is necessary for the usermode helper code and the code that launches init to use set_fs so that pages coming from the kernel look like they are coming from userspace. To allow that usage of set_fs to be removed cleanly the argument copying from userspace needs to happen earlier. Move the computation of bprm->filename and possible allocation of a name in the case of execveat into alloc_bprm to make that possible. The exectuable name, the arguments, and the environment are copied into the new usermode stack which is stored in bprm until exec passes the point of no return. As the executable name is copied first onto the usermode stack it needs to be known. As there are no dependencies to computing the executable name, compute it early in alloc_bprm. As an implementation detail if the filename needs to be generated because it embeds a file descriptor store that filename in a new field bprm->fdpath, and free it in free_bprm. Previously this was done in an independent variable pathbuf. I have renamed pathbuf fdpath because fdpath is more suggestive of what kind of path is in the variable. I moved fdpath into struct linux_binprm because it is tightly tied to the other variables in struct linux_binprm, and as such is needed to allow the call alloc_binprm to move. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lkml.kernel.org/r/87k0z66x8f.fsf@x220.int.ebiederm.org Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-07-11 13:16:15 +00:00
goto out;
if (fd == AT_FDCWD || filename->name[0] == '/') {
bprm->filename = filename->name;
} else {
if (filename->name[0] == '\0')
bprm->fdpath = kasprintf(GFP_KERNEL, "/dev/fd/%d", fd);
else
bprm->fdpath = kasprintf(GFP_KERNEL, "/dev/fd/%d/%s",
fd, filename->name);
if (!bprm->fdpath)
goto out_free;
bprm->filename = bprm->fdpath;
}
bprm->interp = bprm->filename;
exec: Move bprm_mm_init into alloc_bprm Currently it is necessary for the usermode helper code and the code that launches init to use set_fs so that pages coming from the kernel look like they are coming from userspace. To allow that usage of set_fs to be removed cleanly the argument copying from userspace needs to happen earlier. Move the allocation and initialization of bprm->mm into alloc_bprm so that the bprm->mm is available early to store the new user stack into. This is a prerequisite for copying argv and envp into the new user stack early before ther rest of exec. To keep the things consistent the cleanup of bprm->mm is moved into free_bprm. So that bprm->mm will be cleaned up whenever bprm->mm is allocated and free_bprm are called. Moving bprm_mm_init earlier is safe as it does not depend on any files, current->in_execve, current->fs->in_exec, bprm->unsafe, or the if the file table is shared. (AKA bprm_mm_init does not depend on any of the code that happens between alloc_bprm and where it was previously called.) This moves bprm->mm cleanup after current->fs->in_exec is set to 0. This is safe because current->fs->in_exec is only used to preventy taking an additional reference on the fs_struct. This moves bprm->mm cleanup after current->in_execve is set to 0. This is safe because current->in_execve is only used by the lsms (apparmor and tomoyou) and always for LSM specific functions, never for anything to do with the mm. This adds bprm->mm cleanup into the successful return path. This is safe because being on the successful return path implies that begin_new_exec succeeded and set brpm->mm to NULL. As bprm->mm is NULL bprm cleanup I am moving into free_bprm will do nothing. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lkml.kernel.org/r/87eepe6x7p.fsf@x220.int.ebiederm.org Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-07-10 20:54:54 +00:00
retval = bprm_mm_init(bprm);
if (retval)
goto out_free;
return bprm;
exec: Move initialization of bprm->filename into alloc_bprm Currently it is necessary for the usermode helper code and the code that launches init to use set_fs so that pages coming from the kernel look like they are coming from userspace. To allow that usage of set_fs to be removed cleanly the argument copying from userspace needs to happen earlier. Move the computation of bprm->filename and possible allocation of a name in the case of execveat into alloc_bprm to make that possible. The exectuable name, the arguments, and the environment are copied into the new usermode stack which is stored in bprm until exec passes the point of no return. As the executable name is copied first onto the usermode stack it needs to be known. As there are no dependencies to computing the executable name, compute it early in alloc_bprm. As an implementation detail if the filename needs to be generated because it embeds a file descriptor store that filename in a new field bprm->fdpath, and free it in free_bprm. Previously this was done in an independent variable pathbuf. I have renamed pathbuf fdpath because fdpath is more suggestive of what kind of path is in the variable. I moved fdpath into struct linux_binprm because it is tightly tied to the other variables in struct linux_binprm, and as such is needed to allow the call alloc_binprm to move. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lkml.kernel.org/r/87k0z66x8f.fsf@x220.int.ebiederm.org Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-07-11 13:16:15 +00:00
out_free:
free_bprm(bprm);
out:
return ERR_PTR(retval);
}
int bprm_change_interp(const char *interp, struct linux_binprm *bprm)
exec: do not leave bprm->interp on stack If a series of scripts are executed, each triggering module loading via unprintable bytes in the script header, kernel stack contents can leak into the command line. Normally execution of binfmt_script and binfmt_misc happens recursively. However, when modules are enabled, and unprintable bytes exist in the bprm->buf, execution will restart after attempting to load matching binfmt modules. Unfortunately, the logic in binfmt_script and binfmt_misc does not expect to get restarted. They leave bprm->interp pointing to their local stack. This means on restart bprm->interp is left pointing into unused stack memory which can then be copied into the userspace argv areas. After additional study, it seems that both recursion and restart remains the desirable way to handle exec with scripts, misc, and modules. As such, we need to protect the changes to interp. This changes the logic to require allocation for any changes to the bprm->interp. To avoid adding a new kmalloc to every exec, the default value is left as-is. Only when passing through binfmt_script or binfmt_misc does an allocation take place. For a proof of concept, see DoTest.sh from: http://www.halfdog.net/Security/2012/LinuxKernelBinfmtScriptStackDataDisclosure/ Signed-off-by: Kees Cook <keescook@chromium.org> Cc: halfdog <me@halfdog.net> Cc: P J P <ppandit@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-20 23:05:16 +00:00
{
/* If a binfmt changed the interp, free it first. */
if (bprm->interp != bprm->filename)
kfree(bprm->interp);
bprm->interp = kstrdup(interp, GFP_KERNEL);
if (!bprm->interp)
return -ENOMEM;
return 0;
}
EXPORT_SYMBOL(bprm_change_interp);
CRED: Make execve() take advantage of copy-on-write credentials Make execve() take advantage of copy-on-write credentials, allowing it to set up the credentials in advance, and then commit the whole lot after the point of no return. This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). The credential bits from struct linux_binprm are, for the most part, replaced with a single credentials pointer (bprm->cred). This means that all the creds can be calculated in advance and then applied at the point of no return with no possibility of failure. I would like to replace bprm->cap_effective with: cap_isclear(bprm->cap_effective) but this seems impossible due to special behaviour for processes of pid 1 (they always retain their parent's capability masks where normally they'd be changed - see cap_bprm_set_creds()). The following sequence of events now happens: (a) At the start of do_execve, the current task's cred_exec_mutex is locked to prevent PTRACE_ATTACH from obsoleting the calculation of creds that we make. (a) prepare_exec_creds() is then called to make a copy of the current task's credentials and prepare it. This copy is then assigned to bprm->cred. This renders security_bprm_alloc() and security_bprm_free() unnecessary, and so they've been removed. (b) The determination of unsafe execution is now performed immediately after (a) rather than later on in the code. The result is stored in bprm->unsafe for future reference. (c) prepare_binprm() is called, possibly multiple times. (i) This applies the result of set[ug]id binaries to the new creds attached to bprm->cred. Personality bit clearance is recorded, but now deferred on the basis that the exec procedure may yet fail. (ii) This then calls the new security_bprm_set_creds(). This should calculate the new LSM and capability credentials into *bprm->cred. This folds together security_bprm_set() and parts of security_bprm_apply_creds() (these two have been removed). Anything that might fail must be done at this point. (iii) bprm->cred_prepared is set to 1. bprm->cred_prepared is 0 on the first pass of the security calculations, and 1 on all subsequent passes. This allows SELinux in (ii) to base its calculations only on the initial script and not on the interpreter. (d) flush_old_exec() is called to commit the task to execution. This performs the following steps with regard to credentials: (i) Clear pdeath_signal and set dumpable on certain circumstances that may not be covered by commit_creds(). (ii) Clear any bits in current->personality that were deferred from (c.i). (e) install_exec_creds() [compute_creds() as was] is called to install the new credentials. This performs the following steps with regard to credentials: (i) Calls security_bprm_committing_creds() to apply any security requirements, such as flushing unauthorised files in SELinux, that must be done before the credentials are changed. This is made up of bits of security_bprm_apply_creds() and security_bprm_post_apply_creds(), both of which have been removed. This function is not allowed to fail; anything that might fail must have been done in (c.ii). (ii) Calls commit_creds() to apply the new credentials in a single assignment (more or less). Possibly pdeath_signal and dumpable should be part of struct creds. (iii) Unlocks the task's cred_replace_mutex, thus allowing PTRACE_ATTACH to take place. (iv) Clears The bprm->cred pointer as the credentials it was holding are now immutable. (v) Calls security_bprm_committed_creds() to apply any security alterations that must be done after the creds have been changed. SELinux uses this to flush signals and signal handlers. (f) If an error occurs before (d.i), bprm_free() will call abort_creds() to destroy the proposed new credentials and will then unlock cred_replace_mutex. No changes to the credentials will have been made. (2) LSM interface. A number of functions have been changed, added or removed: (*) security_bprm_alloc(), ->bprm_alloc_security() (*) security_bprm_free(), ->bprm_free_security() Removed in favour of preparing new credentials and modifying those. (*) security_bprm_apply_creds(), ->bprm_apply_creds() (*) security_bprm_post_apply_creds(), ->bprm_post_apply_creds() Removed; split between security_bprm_set_creds(), security_bprm_committing_creds() and security_bprm_committed_creds(). (*) security_bprm_set(), ->bprm_set_security() Removed; folded into security_bprm_set_creds(). (*) security_bprm_set_creds(), ->bprm_set_creds() New. The new credentials in bprm->creds should be checked and set up as appropriate. bprm->cred_prepared is 0 on the first call, 1 on the second and subsequent calls. (*) security_bprm_committing_creds(), ->bprm_committing_creds() (*) security_bprm_committed_creds(), ->bprm_committed_creds() New. Apply the security effects of the new credentials. This includes closing unauthorised files in SELinux. This function may not fail. When the former is called, the creds haven't yet been applied to the process; when the latter is called, they have. The former may access bprm->cred, the latter may not. (3) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) The bprm_security_struct struct has been removed in favour of using the credentials-under-construction approach. (c) flush_unauthorized_files() now takes a cred pointer and passes it on to inode_has_perm(), file_has_perm() and dentry_open(). Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 23:39:24 +00:00
/*
* determine how safe it is to execute the proposed program
* - the caller must hold ->cred_guard_mutex to protect against
seccomp: implement SECCOMP_FILTER_FLAG_TSYNC Applying restrictive seccomp filter programs to large or diverse codebases often requires handling threads which may be started early in the process lifetime (e.g., by code that is linked in). While it is possible to apply permissive programs prior to process start up, it is difficult to further restrict the kernel ABI to those threads after that point. This change adds a new seccomp syscall flag to SECCOMP_SET_MODE_FILTER for synchronizing thread group seccomp filters at filter installation time. When calling seccomp(SECCOMP_SET_MODE_FILTER, SECCOMP_FILTER_FLAG_TSYNC, filter) an attempt will be made to synchronize all threads in current's threadgroup to its new seccomp filter program. This is possible iff all threads are using a filter that is an ancestor to the filter current is attempting to synchronize to. NULL filters (where the task is running as SECCOMP_MODE_NONE) are also treated as ancestors allowing threads to be transitioned into SECCOMP_MODE_FILTER. If prctrl(PR_SET_NO_NEW_PRIVS, ...) has been set on the calling thread, no_new_privs will be set for all synchronized threads too. On success, 0 is returned. On failure, the pid of one of the failing threads will be returned and no filters will have been applied. The race conditions against another thread are: - requesting TSYNC (already handled by sighand lock) - performing a clone (already handled by sighand lock) - changing its filter (already handled by sighand lock) - calling exec (handled by cred_guard_mutex) The clone case is assisted by the fact that new threads will have their seccomp state duplicated from their parent before appearing on the tasklist. Holding cred_guard_mutex means that seccomp filters cannot be assigned while in the middle of another thread's exec (potentially bypassing no_new_privs or similar). The call to de_thread() may kill threads waiting for the mutex. Changes across threads to the filter pointer includes a barrier. Based on patches by Will Drewry. Suggested-by: Julien Tinnes <jln@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Andy Lutomirski <luto@amacapital.net>
2014-06-05 07:23:17 +00:00
* PTRACE_ATTACH or seccomp thread-sync
CRED: Make execve() take advantage of copy-on-write credentials Make execve() take advantage of copy-on-write credentials, allowing it to set up the credentials in advance, and then commit the whole lot after the point of no return. This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). The credential bits from struct linux_binprm are, for the most part, replaced with a single credentials pointer (bprm->cred). This means that all the creds can be calculated in advance and then applied at the point of no return with no possibility of failure. I would like to replace bprm->cap_effective with: cap_isclear(bprm->cap_effective) but this seems impossible due to special behaviour for processes of pid 1 (they always retain their parent's capability masks where normally they'd be changed - see cap_bprm_set_creds()). The following sequence of events now happens: (a) At the start of do_execve, the current task's cred_exec_mutex is locked to prevent PTRACE_ATTACH from obsoleting the calculation of creds that we make. (a) prepare_exec_creds() is then called to make a copy of the current task's credentials and prepare it. This copy is then assigned to bprm->cred. This renders security_bprm_alloc() and security_bprm_free() unnecessary, and so they've been removed. (b) The determination of unsafe execution is now performed immediately after (a) rather than later on in the code. The result is stored in bprm->unsafe for future reference. (c) prepare_binprm() is called, possibly multiple times. (i) This applies the result of set[ug]id binaries to the new creds attached to bprm->cred. Personality bit clearance is recorded, but now deferred on the basis that the exec procedure may yet fail. (ii) This then calls the new security_bprm_set_creds(). This should calculate the new LSM and capability credentials into *bprm->cred. This folds together security_bprm_set() and parts of security_bprm_apply_creds() (these two have been removed). Anything that might fail must be done at this point. (iii) bprm->cred_prepared is set to 1. bprm->cred_prepared is 0 on the first pass of the security calculations, and 1 on all subsequent passes. This allows SELinux in (ii) to base its calculations only on the initial script and not on the interpreter. (d) flush_old_exec() is called to commit the task to execution. This performs the following steps with regard to credentials: (i) Clear pdeath_signal and set dumpable on certain circumstances that may not be covered by commit_creds(). (ii) Clear any bits in current->personality that were deferred from (c.i). (e) install_exec_creds() [compute_creds() as was] is called to install the new credentials. This performs the following steps with regard to credentials: (i) Calls security_bprm_committing_creds() to apply any security requirements, such as flushing unauthorised files in SELinux, that must be done before the credentials are changed. This is made up of bits of security_bprm_apply_creds() and security_bprm_post_apply_creds(), both of which have been removed. This function is not allowed to fail; anything that might fail must have been done in (c.ii). (ii) Calls commit_creds() to apply the new credentials in a single assignment (more or less). Possibly pdeath_signal and dumpable should be part of struct creds. (iii) Unlocks the task's cred_replace_mutex, thus allowing PTRACE_ATTACH to take place. (iv) Clears The bprm->cred pointer as the credentials it was holding are now immutable. (v) Calls security_bprm_committed_creds() to apply any security alterations that must be done after the creds have been changed. SELinux uses this to flush signals and signal handlers. (f) If an error occurs before (d.i), bprm_free() will call abort_creds() to destroy the proposed new credentials and will then unlock cred_replace_mutex. No changes to the credentials will have been made. (2) LSM interface. A number of functions have been changed, added or removed: (*) security_bprm_alloc(), ->bprm_alloc_security() (*) security_bprm_free(), ->bprm_free_security() Removed in favour of preparing new credentials and modifying those. (*) security_bprm_apply_creds(), ->bprm_apply_creds() (*) security_bprm_post_apply_creds(), ->bprm_post_apply_creds() Removed; split between security_bprm_set_creds(), security_bprm_committing_creds() and security_bprm_committed_creds(). (*) security_bprm_set(), ->bprm_set_security() Removed; folded into security_bprm_set_creds(). (*) security_bprm_set_creds(), ->bprm_set_creds() New. The new credentials in bprm->creds should be checked and set up as appropriate. bprm->cred_prepared is 0 on the first call, 1 on the second and subsequent calls. (*) security_bprm_committing_creds(), ->bprm_committing_creds() (*) security_bprm_committed_creds(), ->bprm_committed_creds() New. Apply the security effects of the new credentials. This includes closing unauthorised files in SELinux. This function may not fail. When the former is called, the creds haven't yet been applied to the process; when the latter is called, they have. The former may access bprm->cred, the latter may not. (3) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) The bprm_security_struct struct has been removed in favour of using the credentials-under-construction approach. (c) flush_unauthorized_files() now takes a cred pointer and passes it on to inode_has_perm(), file_has_perm() and dentry_open(). Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 23:39:24 +00:00
*/
2014-01-23 23:55:50 +00:00
static void check_unsafe_exec(struct linux_binprm *bprm)
CRED: Make execve() take advantage of copy-on-write credentials Make execve() take advantage of copy-on-write credentials, allowing it to set up the credentials in advance, and then commit the whole lot after the point of no return. This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). The credential bits from struct linux_binprm are, for the most part, replaced with a single credentials pointer (bprm->cred). This means that all the creds can be calculated in advance and then applied at the point of no return with no possibility of failure. I would like to replace bprm->cap_effective with: cap_isclear(bprm->cap_effective) but this seems impossible due to special behaviour for processes of pid 1 (they always retain their parent's capability masks where normally they'd be changed - see cap_bprm_set_creds()). The following sequence of events now happens: (a) At the start of do_execve, the current task's cred_exec_mutex is locked to prevent PTRACE_ATTACH from obsoleting the calculation of creds that we make. (a) prepare_exec_creds() is then called to make a copy of the current task's credentials and prepare it. This copy is then assigned to bprm->cred. This renders security_bprm_alloc() and security_bprm_free() unnecessary, and so they've been removed. (b) The determination of unsafe execution is now performed immediately after (a) rather than later on in the code. The result is stored in bprm->unsafe for future reference. (c) prepare_binprm() is called, possibly multiple times. (i) This applies the result of set[ug]id binaries to the new creds attached to bprm->cred. Personality bit clearance is recorded, but now deferred on the basis that the exec procedure may yet fail. (ii) This then calls the new security_bprm_set_creds(). This should calculate the new LSM and capability credentials into *bprm->cred. This folds together security_bprm_set() and parts of security_bprm_apply_creds() (these two have been removed). Anything that might fail must be done at this point. (iii) bprm->cred_prepared is set to 1. bprm->cred_prepared is 0 on the first pass of the security calculations, and 1 on all subsequent passes. This allows SELinux in (ii) to base its calculations only on the initial script and not on the interpreter. (d) flush_old_exec() is called to commit the task to execution. This performs the following steps with regard to credentials: (i) Clear pdeath_signal and set dumpable on certain circumstances that may not be covered by commit_creds(). (ii) Clear any bits in current->personality that were deferred from (c.i). (e) install_exec_creds() [compute_creds() as was] is called to install the new credentials. This performs the following steps with regard to credentials: (i) Calls security_bprm_committing_creds() to apply any security requirements, such as flushing unauthorised files in SELinux, that must be done before the credentials are changed. This is made up of bits of security_bprm_apply_creds() and security_bprm_post_apply_creds(), both of which have been removed. This function is not allowed to fail; anything that might fail must have been done in (c.ii). (ii) Calls commit_creds() to apply the new credentials in a single assignment (more or less). Possibly pdeath_signal and dumpable should be part of struct creds. (iii) Unlocks the task's cred_replace_mutex, thus allowing PTRACE_ATTACH to take place. (iv) Clears The bprm->cred pointer as the credentials it was holding are now immutable. (v) Calls security_bprm_committed_creds() to apply any security alterations that must be done after the creds have been changed. SELinux uses this to flush signals and signal handlers. (f) If an error occurs before (d.i), bprm_free() will call abort_creds() to destroy the proposed new credentials and will then unlock cred_replace_mutex. No changes to the credentials will have been made. (2) LSM interface. A number of functions have been changed, added or removed: (*) security_bprm_alloc(), ->bprm_alloc_security() (*) security_bprm_free(), ->bprm_free_security() Removed in favour of preparing new credentials and modifying those. (*) security_bprm_apply_creds(), ->bprm_apply_creds() (*) security_bprm_post_apply_creds(), ->bprm_post_apply_creds() Removed; split between security_bprm_set_creds(), security_bprm_committing_creds() and security_bprm_committed_creds(). (*) security_bprm_set(), ->bprm_set_security() Removed; folded into security_bprm_set_creds(). (*) security_bprm_set_creds(), ->bprm_set_creds() New. The new credentials in bprm->creds should be checked and set up as appropriate. bprm->cred_prepared is 0 on the first call, 1 on the second and subsequent calls. (*) security_bprm_committing_creds(), ->bprm_committing_creds() (*) security_bprm_committed_creds(), ->bprm_committed_creds() New. Apply the security effects of the new credentials. This includes closing unauthorised files in SELinux. This function may not fail. When the former is called, the creds haven't yet been applied to the process; when the latter is called, they have. The former may access bprm->cred, the latter may not. (3) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) The bprm_security_struct struct has been removed in favour of using the credentials-under-construction approach. (c) flush_unauthorized_files() now takes a cred pointer and passes it on to inode_has_perm(), file_has_perm() and dentry_open(). Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 23:39:24 +00:00
{
CRED: Fix SUID exec regression The patch: commit a6f76f23d297f70e2a6b3ec607f7aeeea9e37e8d CRED: Make execve() take advantage of copy-on-write credentials moved the place in which the 'safeness' of a SUID/SGID exec was performed to before de_thread() was called. This means that LSM_UNSAFE_SHARE is now calculated incorrectly. This flag is set if any of the usage counts for fs_struct, files_struct and sighand_struct are greater than 1 at the time the determination is made. All of which are true for threads created by the pthread library. However, since we wish to make the security calculation before irrevocably damaging the process so that we can return it an error code in the case where we decide we want to reject the exec request on this basis, we have to make the determination before calling de_thread(). So, instead, we count up the number of threads (CLONE_THREAD) that are sharing our fs_struct (CLONE_FS), files_struct (CLONE_FILES) and sighand_structs (CLONE_SIGHAND/CLONE_THREAD) with us. These will be killed by de_thread() and so can be discounted by check_unsafe_exec(). We do have to be careful because CLONE_THREAD does not imply FS or FILES. We _assume_ that there will be no extra references to these structs held by the threads we're going to kill. This can be tested with the attached pair of programs. Build the two programs using the Makefile supplied, and run ./test1 as a non-root user. If successful, you should see something like: [dhowells@andromeda tmp]$ ./test1 --TEST1-- uid=4043, euid=4043 suid=4043 exec ./test2 --TEST2-- uid=4043, euid=0 suid=0 SUCCESS - Correct effective user ID and if unsuccessful, something like: [dhowells@andromeda tmp]$ ./test1 --TEST1-- uid=4043, euid=4043 suid=4043 exec ./test2 --TEST2-- uid=4043, euid=4043 suid=4043 ERROR - Incorrect effective user ID! The non-root user ID you see will depend on the user you run as. [test1.c] #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <pthread.h> static void *thread_func(void *arg) { while (1) {} } int main(int argc, char **argv) { pthread_t tid; uid_t uid, euid, suid; printf("--TEST1--\n"); getresuid(&uid, &euid, &suid); printf("uid=%d, euid=%d suid=%d\n", uid, euid, suid); if (pthread_create(&tid, NULL, thread_func, NULL) < 0) { perror("pthread_create"); exit(1); } printf("exec ./test2\n"); execlp("./test2", "test2", NULL); perror("./test2"); _exit(1); } [test2.c] #include <stdio.h> #include <stdlib.h> #include <unistd.h> int main(int argc, char **argv) { uid_t uid, euid, suid; getresuid(&uid, &euid, &suid); printf("--TEST2--\n"); printf("uid=%d, euid=%d suid=%d\n", uid, euid, suid); if (euid != 0) { fprintf(stderr, "ERROR - Incorrect effective user ID!\n"); exit(1); } printf("SUCCESS - Correct effective user ID\n"); exit(0); } [Makefile] CFLAGS = -D_GNU_SOURCE -Wall -Werror -Wunused all: test1 test2 test1: test1.c gcc $(CFLAGS) -o test1 test1.c -lpthread test2: test2.c gcc $(CFLAGS) -o test2 test2.c sudo chown root.root test2 sudo chmod +s test2 Reported-by: David Smith <dsmith@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: David Smith <dsmith@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-02-06 11:45:46 +00:00
struct task_struct *p = current, *t;
unsigned n_fs;
CRED: Make execve() take advantage of copy-on-write credentials Make execve() take advantage of copy-on-write credentials, allowing it to set up the credentials in advance, and then commit the whole lot after the point of no return. This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). The credential bits from struct linux_binprm are, for the most part, replaced with a single credentials pointer (bprm->cred). This means that all the creds can be calculated in advance and then applied at the point of no return with no possibility of failure. I would like to replace bprm->cap_effective with: cap_isclear(bprm->cap_effective) but this seems impossible due to special behaviour for processes of pid 1 (they always retain their parent's capability masks where normally they'd be changed - see cap_bprm_set_creds()). The following sequence of events now happens: (a) At the start of do_execve, the current task's cred_exec_mutex is locked to prevent PTRACE_ATTACH from obsoleting the calculation of creds that we make. (a) prepare_exec_creds() is then called to make a copy of the current task's credentials and prepare it. This copy is then assigned to bprm->cred. This renders security_bprm_alloc() and security_bprm_free() unnecessary, and so they've been removed. (b) The determination of unsafe execution is now performed immediately after (a) rather than later on in the code. The result is stored in bprm->unsafe for future reference. (c) prepare_binprm() is called, possibly multiple times. (i) This applies the result of set[ug]id binaries to the new creds attached to bprm->cred. Personality bit clearance is recorded, but now deferred on the basis that the exec procedure may yet fail. (ii) This then calls the new security_bprm_set_creds(). This should calculate the new LSM and capability credentials into *bprm->cred. This folds together security_bprm_set() and parts of security_bprm_apply_creds() (these two have been removed). Anything that might fail must be done at this point. (iii) bprm->cred_prepared is set to 1. bprm->cred_prepared is 0 on the first pass of the security calculations, and 1 on all subsequent passes. This allows SELinux in (ii) to base its calculations only on the initial script and not on the interpreter. (d) flush_old_exec() is called to commit the task to execution. This performs the following steps with regard to credentials: (i) Clear pdeath_signal and set dumpable on certain circumstances that may not be covered by commit_creds(). (ii) Clear any bits in current->personality that were deferred from (c.i). (e) install_exec_creds() [compute_creds() as was] is called to install the new credentials. This performs the following steps with regard to credentials: (i) Calls security_bprm_committing_creds() to apply any security requirements, such as flushing unauthorised files in SELinux, that must be done before the credentials are changed. This is made up of bits of security_bprm_apply_creds() and security_bprm_post_apply_creds(), both of which have been removed. This function is not allowed to fail; anything that might fail must have been done in (c.ii). (ii) Calls commit_creds() to apply the new credentials in a single assignment (more or less). Possibly pdeath_signal and dumpable should be part of struct creds. (iii) Unlocks the task's cred_replace_mutex, thus allowing PTRACE_ATTACH to take place. (iv) Clears The bprm->cred pointer as the credentials it was holding are now immutable. (v) Calls security_bprm_committed_creds() to apply any security alterations that must be done after the creds have been changed. SELinux uses this to flush signals and signal handlers. (f) If an error occurs before (d.i), bprm_free() will call abort_creds() to destroy the proposed new credentials and will then unlock cred_replace_mutex. No changes to the credentials will have been made. (2) LSM interface. A number of functions have been changed, added or removed: (*) security_bprm_alloc(), ->bprm_alloc_security() (*) security_bprm_free(), ->bprm_free_security() Removed in favour of preparing new credentials and modifying those. (*) security_bprm_apply_creds(), ->bprm_apply_creds() (*) security_bprm_post_apply_creds(), ->bprm_post_apply_creds() Removed; split between security_bprm_set_creds(), security_bprm_committing_creds() and security_bprm_committed_creds(). (*) security_bprm_set(), ->bprm_set_security() Removed; folded into security_bprm_set_creds(). (*) security_bprm_set_creds(), ->bprm_set_creds() New. The new credentials in bprm->creds should be checked and set up as appropriate. bprm->cred_prepared is 0 on the first call, 1 on the second and subsequent calls. (*) security_bprm_committing_creds(), ->bprm_committing_creds() (*) security_bprm_committed_creds(), ->bprm_committed_creds() New. Apply the security effects of the new credentials. This includes closing unauthorised files in SELinux. This function may not fail. When the former is called, the creds haven't yet been applied to the process; when the latter is called, they have. The former may access bprm->cred, the latter may not. (3) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) The bprm_security_struct struct has been removed in favour of using the credentials-under-construction approach. (c) flush_unauthorized_files() now takes a cred pointer and passes it on to inode_has_perm(), file_has_perm() and dentry_open(). Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 23:39:24 +00:00
if (p->ptrace)
bprm->unsafe |= LSM_UNSAFE_PTRACE;
CRED: Make execve() take advantage of copy-on-write credentials Make execve() take advantage of copy-on-write credentials, allowing it to set up the credentials in advance, and then commit the whole lot after the point of no return. This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). The credential bits from struct linux_binprm are, for the most part, replaced with a single credentials pointer (bprm->cred). This means that all the creds can be calculated in advance and then applied at the point of no return with no possibility of failure. I would like to replace bprm->cap_effective with: cap_isclear(bprm->cap_effective) but this seems impossible due to special behaviour for processes of pid 1 (they always retain their parent's capability masks where normally they'd be changed - see cap_bprm_set_creds()). The following sequence of events now happens: (a) At the start of do_execve, the current task's cred_exec_mutex is locked to prevent PTRACE_ATTACH from obsoleting the calculation of creds that we make. (a) prepare_exec_creds() is then called to make a copy of the current task's credentials and prepare it. This copy is then assigned to bprm->cred. This renders security_bprm_alloc() and security_bprm_free() unnecessary, and so they've been removed. (b) The determination of unsafe execution is now performed immediately after (a) rather than later on in the code. The result is stored in bprm->unsafe for future reference. (c) prepare_binprm() is called, possibly multiple times. (i) This applies the result of set[ug]id binaries to the new creds attached to bprm->cred. Personality bit clearance is recorded, but now deferred on the basis that the exec procedure may yet fail. (ii) This then calls the new security_bprm_set_creds(). This should calculate the new LSM and capability credentials into *bprm->cred. This folds together security_bprm_set() and parts of security_bprm_apply_creds() (these two have been removed). Anything that might fail must be done at this point. (iii) bprm->cred_prepared is set to 1. bprm->cred_prepared is 0 on the first pass of the security calculations, and 1 on all subsequent passes. This allows SELinux in (ii) to base its calculations only on the initial script and not on the interpreter. (d) flush_old_exec() is called to commit the task to execution. This performs the following steps with regard to credentials: (i) Clear pdeath_signal and set dumpable on certain circumstances that may not be covered by commit_creds(). (ii) Clear any bits in current->personality that were deferred from (c.i). (e) install_exec_creds() [compute_creds() as was] is called to install the new credentials. This performs the following steps with regard to credentials: (i) Calls security_bprm_committing_creds() to apply any security requirements, such as flushing unauthorised files in SELinux, that must be done before the credentials are changed. This is made up of bits of security_bprm_apply_creds() and security_bprm_post_apply_creds(), both of which have been removed. This function is not allowed to fail; anything that might fail must have been done in (c.ii). (ii) Calls commit_creds() to apply the new credentials in a single assignment (more or less). Possibly pdeath_signal and dumpable should be part of struct creds. (iii) Unlocks the task's cred_replace_mutex, thus allowing PTRACE_ATTACH to take place. (iv) Clears The bprm->cred pointer as the credentials it was holding are now immutable. (v) Calls security_bprm_committed_creds() to apply any security alterations that must be done after the creds have been changed. SELinux uses this to flush signals and signal handlers. (f) If an error occurs before (d.i), bprm_free() will call abort_creds() to destroy the proposed new credentials and will then unlock cred_replace_mutex. No changes to the credentials will have been made. (2) LSM interface. A number of functions have been changed, added or removed: (*) security_bprm_alloc(), ->bprm_alloc_security() (*) security_bprm_free(), ->bprm_free_security() Removed in favour of preparing new credentials and modifying those. (*) security_bprm_apply_creds(), ->bprm_apply_creds() (*) security_bprm_post_apply_creds(), ->bprm_post_apply_creds() Removed; split between security_bprm_set_creds(), security_bprm_committing_creds() and security_bprm_committed_creds(). (*) security_bprm_set(), ->bprm_set_security() Removed; folded into security_bprm_set_creds(). (*) security_bprm_set_creds(), ->bprm_set_creds() New. The new credentials in bprm->creds should be checked and set up as appropriate. bprm->cred_prepared is 0 on the first call, 1 on the second and subsequent calls. (*) security_bprm_committing_creds(), ->bprm_committing_creds() (*) security_bprm_committed_creds(), ->bprm_committed_creds() New. Apply the security effects of the new credentials. This includes closing unauthorised files in SELinux. This function may not fail. When the former is called, the creds haven't yet been applied to the process; when the latter is called, they have. The former may access bprm->cred, the latter may not. (3) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) The bprm_security_struct struct has been removed in favour of using the credentials-under-construction approach. (c) flush_unauthorized_files() now takes a cred pointer and passes it on to inode_has_perm(), file_has_perm() and dentry_open(). Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 23:39:24 +00:00
Add PR_{GET,SET}_NO_NEW_PRIVS to prevent execve from granting privs With this change, calling prctl(PR_SET_NO_NEW_PRIVS, 1, 0, 0, 0) disables privilege granting operations at execve-time. For example, a process will not be able to execute a setuid binary to change their uid or gid if this bit is set. The same is true for file capabilities. Additionally, LSM_UNSAFE_NO_NEW_PRIVS is defined to ensure that LSMs respect the requested behavior. To determine if the NO_NEW_PRIVS bit is set, a task may call prctl(PR_GET_NO_NEW_PRIVS, 0, 0, 0, 0); It returns 1 if set and 0 if it is not set. If any of the arguments are non-zero, it will return -1 and set errno to -EINVAL. (PR_SET_NO_NEW_PRIVS behaves similarly.) This functionality is desired for the proposed seccomp filter patch series. By using PR_SET_NO_NEW_PRIVS, it allows a task to modify the system call behavior for itself and its child tasks without being able to impact the behavior of a more privileged task. Another potential use is making certain privileged operations unprivileged. For example, chroot may be considered "safe" if it cannot affect privileged tasks. Note, this patch causes execve to fail when PR_SET_NO_NEW_PRIVS is set and AppArmor is in use. It is fixed in a subsequent patch. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Eric Paris <eparis@redhat.com> Acked-by: Kees Cook <keescook@chromium.org> v18: updated change desc v17: using new define values as per 3.4 Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:50 +00:00
/*
* This isn't strictly necessary, but it makes it harder for LSMs to
* mess up.
*/
if (task_no_new_privs(current))
Add PR_{GET,SET}_NO_NEW_PRIVS to prevent execve from granting privs With this change, calling prctl(PR_SET_NO_NEW_PRIVS, 1, 0, 0, 0) disables privilege granting operations at execve-time. For example, a process will not be able to execute a setuid binary to change their uid or gid if this bit is set. The same is true for file capabilities. Additionally, LSM_UNSAFE_NO_NEW_PRIVS is defined to ensure that LSMs respect the requested behavior. To determine if the NO_NEW_PRIVS bit is set, a task may call prctl(PR_GET_NO_NEW_PRIVS, 0, 0, 0, 0); It returns 1 if set and 0 if it is not set. If any of the arguments are non-zero, it will return -1 and set errno to -EINVAL. (PR_SET_NO_NEW_PRIVS behaves similarly.) This functionality is desired for the proposed seccomp filter patch series. By using PR_SET_NO_NEW_PRIVS, it allows a task to modify the system call behavior for itself and its child tasks without being able to impact the behavior of a more privileged task. Another potential use is making certain privileged operations unprivileged. For example, chroot may be considered "safe" if it cannot affect privileged tasks. Note, this patch causes execve to fail when PR_SET_NO_NEW_PRIVS is set and AppArmor is in use. It is fixed in a subsequent patch. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Eric Paris <eparis@redhat.com> Acked-by: Kees Cook <keescook@chromium.org> v18: updated change desc v17: using new define values as per 3.4 Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:50 +00:00
bprm->unsafe |= LSM_UNSAFE_NO_NEW_PRIVS;
t = p;
CRED: Fix SUID exec regression The patch: commit a6f76f23d297f70e2a6b3ec607f7aeeea9e37e8d CRED: Make execve() take advantage of copy-on-write credentials moved the place in which the 'safeness' of a SUID/SGID exec was performed to before de_thread() was called. This means that LSM_UNSAFE_SHARE is now calculated incorrectly. This flag is set if any of the usage counts for fs_struct, files_struct and sighand_struct are greater than 1 at the time the determination is made. All of which are true for threads created by the pthread library. However, since we wish to make the security calculation before irrevocably damaging the process so that we can return it an error code in the case where we decide we want to reject the exec request on this basis, we have to make the determination before calling de_thread(). So, instead, we count up the number of threads (CLONE_THREAD) that are sharing our fs_struct (CLONE_FS), files_struct (CLONE_FILES) and sighand_structs (CLONE_SIGHAND/CLONE_THREAD) with us. These will be killed by de_thread() and so can be discounted by check_unsafe_exec(). We do have to be careful because CLONE_THREAD does not imply FS or FILES. We _assume_ that there will be no extra references to these structs held by the threads we're going to kill. This can be tested with the attached pair of programs. Build the two programs using the Makefile supplied, and run ./test1 as a non-root user. If successful, you should see something like: [dhowells@andromeda tmp]$ ./test1 --TEST1-- uid=4043, euid=4043 suid=4043 exec ./test2 --TEST2-- uid=4043, euid=0 suid=0 SUCCESS - Correct effective user ID and if unsuccessful, something like: [dhowells@andromeda tmp]$ ./test1 --TEST1-- uid=4043, euid=4043 suid=4043 exec ./test2 --TEST2-- uid=4043, euid=4043 suid=4043 ERROR - Incorrect effective user ID! The non-root user ID you see will depend on the user you run as. [test1.c] #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <pthread.h> static void *thread_func(void *arg) { while (1) {} } int main(int argc, char **argv) { pthread_t tid; uid_t uid, euid, suid; printf("--TEST1--\n"); getresuid(&uid, &euid, &suid); printf("uid=%d, euid=%d suid=%d\n", uid, euid, suid); if (pthread_create(&tid, NULL, thread_func, NULL) < 0) { perror("pthread_create"); exit(1); } printf("exec ./test2\n"); execlp("./test2", "test2", NULL); perror("./test2"); _exit(1); } [test2.c] #include <stdio.h> #include <stdlib.h> #include <unistd.h> int main(int argc, char **argv) { uid_t uid, euid, suid; getresuid(&uid, &euid, &suid); printf("--TEST2--\n"); printf("uid=%d, euid=%d suid=%d\n", uid, euid, suid); if (euid != 0) { fprintf(stderr, "ERROR - Incorrect effective user ID!\n"); exit(1); } printf("SUCCESS - Correct effective user ID\n"); exit(0); } [Makefile] CFLAGS = -D_GNU_SOURCE -Wall -Werror -Wunused all: test1 test2 test1: test1.c gcc $(CFLAGS) -o test1 test1.c -lpthread test2: test2.c gcc $(CFLAGS) -o test2 test2.c sudo chown root.root test2 sudo chmod +s test2 Reported-by: David Smith <dsmith@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: David Smith <dsmith@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-02-06 11:45:46 +00:00
n_fs = 1;
spin_lock(&p->fs->lock);
rcu_read_lock();
while_each_thread(p, t) {
CRED: Fix SUID exec regression The patch: commit a6f76f23d297f70e2a6b3ec607f7aeeea9e37e8d CRED: Make execve() take advantage of copy-on-write credentials moved the place in which the 'safeness' of a SUID/SGID exec was performed to before de_thread() was called. This means that LSM_UNSAFE_SHARE is now calculated incorrectly. This flag is set if any of the usage counts for fs_struct, files_struct and sighand_struct are greater than 1 at the time the determination is made. All of which are true for threads created by the pthread library. However, since we wish to make the security calculation before irrevocably damaging the process so that we can return it an error code in the case where we decide we want to reject the exec request on this basis, we have to make the determination before calling de_thread(). So, instead, we count up the number of threads (CLONE_THREAD) that are sharing our fs_struct (CLONE_FS), files_struct (CLONE_FILES) and sighand_structs (CLONE_SIGHAND/CLONE_THREAD) with us. These will be killed by de_thread() and so can be discounted by check_unsafe_exec(). We do have to be careful because CLONE_THREAD does not imply FS or FILES. We _assume_ that there will be no extra references to these structs held by the threads we're going to kill. This can be tested with the attached pair of programs. Build the two programs using the Makefile supplied, and run ./test1 as a non-root user. If successful, you should see something like: [dhowells@andromeda tmp]$ ./test1 --TEST1-- uid=4043, euid=4043 suid=4043 exec ./test2 --TEST2-- uid=4043, euid=0 suid=0 SUCCESS - Correct effective user ID and if unsuccessful, something like: [dhowells@andromeda tmp]$ ./test1 --TEST1-- uid=4043, euid=4043 suid=4043 exec ./test2 --TEST2-- uid=4043, euid=4043 suid=4043 ERROR - Incorrect effective user ID! The non-root user ID you see will depend on the user you run as. [test1.c] #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <pthread.h> static void *thread_func(void *arg) { while (1) {} } int main(int argc, char **argv) { pthread_t tid; uid_t uid, euid, suid; printf("--TEST1--\n"); getresuid(&uid, &euid, &suid); printf("uid=%d, euid=%d suid=%d\n", uid, euid, suid); if (pthread_create(&tid, NULL, thread_func, NULL) < 0) { perror("pthread_create"); exit(1); } printf("exec ./test2\n"); execlp("./test2", "test2", NULL); perror("./test2"); _exit(1); } [test2.c] #include <stdio.h> #include <stdlib.h> #include <unistd.h> int main(int argc, char **argv) { uid_t uid, euid, suid; getresuid(&uid, &euid, &suid); printf("--TEST2--\n"); printf("uid=%d, euid=%d suid=%d\n", uid, euid, suid); if (euid != 0) { fprintf(stderr, "ERROR - Incorrect effective user ID!\n"); exit(1); } printf("SUCCESS - Correct effective user ID\n"); exit(0); } [Makefile] CFLAGS = -D_GNU_SOURCE -Wall -Werror -Wunused all: test1 test2 test1: test1.c gcc $(CFLAGS) -o test1 test1.c -lpthread test2: test2.c gcc $(CFLAGS) -o test2 test2.c sudo chown root.root test2 sudo chmod +s test2 Reported-by: David Smith <dsmith@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: David Smith <dsmith@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-02-06 11:45:46 +00:00
if (t->fs == p->fs)
n_fs++;
}
rcu_read_unlock();
CRED: Fix SUID exec regression The patch: commit a6f76f23d297f70e2a6b3ec607f7aeeea9e37e8d CRED: Make execve() take advantage of copy-on-write credentials moved the place in which the 'safeness' of a SUID/SGID exec was performed to before de_thread() was called. This means that LSM_UNSAFE_SHARE is now calculated incorrectly. This flag is set if any of the usage counts for fs_struct, files_struct and sighand_struct are greater than 1 at the time the determination is made. All of which are true for threads created by the pthread library. However, since we wish to make the security calculation before irrevocably damaging the process so that we can return it an error code in the case where we decide we want to reject the exec request on this basis, we have to make the determination before calling de_thread(). So, instead, we count up the number of threads (CLONE_THREAD) that are sharing our fs_struct (CLONE_FS), files_struct (CLONE_FILES) and sighand_structs (CLONE_SIGHAND/CLONE_THREAD) with us. These will be killed by de_thread() and so can be discounted by check_unsafe_exec(). We do have to be careful because CLONE_THREAD does not imply FS or FILES. We _assume_ that there will be no extra references to these structs held by the threads we're going to kill. This can be tested with the attached pair of programs. Build the two programs using the Makefile supplied, and run ./test1 as a non-root user. If successful, you should see something like: [dhowells@andromeda tmp]$ ./test1 --TEST1-- uid=4043, euid=4043 suid=4043 exec ./test2 --TEST2-- uid=4043, euid=0 suid=0 SUCCESS - Correct effective user ID and if unsuccessful, something like: [dhowells@andromeda tmp]$ ./test1 --TEST1-- uid=4043, euid=4043 suid=4043 exec ./test2 --TEST2-- uid=4043, euid=4043 suid=4043 ERROR - Incorrect effective user ID! The non-root user ID you see will depend on the user you run as. [test1.c] #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <pthread.h> static void *thread_func(void *arg) { while (1) {} } int main(int argc, char **argv) { pthread_t tid; uid_t uid, euid, suid; printf("--TEST1--\n"); getresuid(&uid, &euid, &suid); printf("uid=%d, euid=%d suid=%d\n", uid, euid, suid); if (pthread_create(&tid, NULL, thread_func, NULL) < 0) { perror("pthread_create"); exit(1); } printf("exec ./test2\n"); execlp("./test2", "test2", NULL); perror("./test2"); _exit(1); } [test2.c] #include <stdio.h> #include <stdlib.h> #include <unistd.h> int main(int argc, char **argv) { uid_t uid, euid, suid; getresuid(&uid, &euid, &suid); printf("--TEST2--\n"); printf("uid=%d, euid=%d suid=%d\n", uid, euid, suid); if (euid != 0) { fprintf(stderr, "ERROR - Incorrect effective user ID!\n"); exit(1); } printf("SUCCESS - Correct effective user ID\n"); exit(0); } [Makefile] CFLAGS = -D_GNU_SOURCE -Wall -Werror -Wunused all: test1 test2 test1: test1.c gcc $(CFLAGS) -o test1 test1.c -lpthread test2: test2.c gcc $(CFLAGS) -o test2 test2.c sudo chown root.root test2 sudo chmod +s test2 Reported-by: David Smith <dsmith@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: David Smith <dsmith@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-02-06 11:45:46 +00:00
2014-01-23 23:55:50 +00:00
if (p->fs->users > n_fs)
CRED: Make execve() take advantage of copy-on-write credentials Make execve() take advantage of copy-on-write credentials, allowing it to set up the credentials in advance, and then commit the whole lot after the point of no return. This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). The credential bits from struct linux_binprm are, for the most part, replaced with a single credentials pointer (bprm->cred). This means that all the creds can be calculated in advance and then applied at the point of no return with no possibility of failure. I would like to replace bprm->cap_effective with: cap_isclear(bprm->cap_effective) but this seems impossible due to special behaviour for processes of pid 1 (they always retain their parent's capability masks where normally they'd be changed - see cap_bprm_set_creds()). The following sequence of events now happens: (a) At the start of do_execve, the current task's cred_exec_mutex is locked to prevent PTRACE_ATTACH from obsoleting the calculation of creds that we make. (a) prepare_exec_creds() is then called to make a copy of the current task's credentials and prepare it. This copy is then assigned to bprm->cred. This renders security_bprm_alloc() and security_bprm_free() unnecessary, and so they've been removed. (b) The determination of unsafe execution is now performed immediately after (a) rather than later on in the code. The result is stored in bprm->unsafe for future reference. (c) prepare_binprm() is called, possibly multiple times. (i) This applies the result of set[ug]id binaries to the new creds attached to bprm->cred. Personality bit clearance is recorded, but now deferred on the basis that the exec procedure may yet fail. (ii) This then calls the new security_bprm_set_creds(). This should calculate the new LSM and capability credentials into *bprm->cred. This folds together security_bprm_set() and parts of security_bprm_apply_creds() (these two have been removed). Anything that might fail must be done at this point. (iii) bprm->cred_prepared is set to 1. bprm->cred_prepared is 0 on the first pass of the security calculations, and 1 on all subsequent passes. This allows SELinux in (ii) to base its calculations only on the initial script and not on the interpreter. (d) flush_old_exec() is called to commit the task to execution. This performs the following steps with regard to credentials: (i) Clear pdeath_signal and set dumpable on certain circumstances that may not be covered by commit_creds(). (ii) Clear any bits in current->personality that were deferred from (c.i). (e) install_exec_creds() [compute_creds() as was] is called to install the new credentials. This performs the following steps with regard to credentials: (i) Calls security_bprm_committing_creds() to apply any security requirements, such as flushing unauthorised files in SELinux, that must be done before the credentials are changed. This is made up of bits of security_bprm_apply_creds() and security_bprm_post_apply_creds(), both of which have been removed. This function is not allowed to fail; anything that might fail must have been done in (c.ii). (ii) Calls commit_creds() to apply the new credentials in a single assignment (more or less). Possibly pdeath_signal and dumpable should be part of struct creds. (iii) Unlocks the task's cred_replace_mutex, thus allowing PTRACE_ATTACH to take place. (iv) Clears The bprm->cred pointer as the credentials it was holding are now immutable. (v) Calls security_bprm_committed_creds() to apply any security alterations that must be done after the creds have been changed. SELinux uses this to flush signals and signal handlers. (f) If an error occurs before (d.i), bprm_free() will call abort_creds() to destroy the proposed new credentials and will then unlock cred_replace_mutex. No changes to the credentials will have been made. (2) LSM interface. A number of functions have been changed, added or removed: (*) security_bprm_alloc(), ->bprm_alloc_security() (*) security_bprm_free(), ->bprm_free_security() Removed in favour of preparing new credentials and modifying those. (*) security_bprm_apply_creds(), ->bprm_apply_creds() (*) security_bprm_post_apply_creds(), ->bprm_post_apply_creds() Removed; split between security_bprm_set_creds(), security_bprm_committing_creds() and security_bprm_committed_creds(). (*) security_bprm_set(), ->bprm_set_security() Removed; folded into security_bprm_set_creds(). (*) security_bprm_set_creds(), ->bprm_set_creds() New. The new credentials in bprm->creds should be checked and set up as appropriate. bprm->cred_prepared is 0 on the first call, 1 on the second and subsequent calls. (*) security_bprm_committing_creds(), ->bprm_committing_creds() (*) security_bprm_committed_creds(), ->bprm_committed_creds() New. Apply the security effects of the new credentials. This includes closing unauthorised files in SELinux. This function may not fail. When the former is called, the creds haven't yet been applied to the process; when the latter is called, they have. The former may access bprm->cred, the latter may not. (3) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) The bprm_security_struct struct has been removed in favour of using the credentials-under-construction approach. (c) flush_unauthorized_files() now takes a cred pointer and passes it on to inode_has_perm(), file_has_perm() and dentry_open(). Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 23:39:24 +00:00
bprm->unsafe |= LSM_UNSAFE_SHARE;
2014-01-23 23:55:50 +00:00
else
p->fs->in_exec = 1;
spin_unlock(&p->fs->lock);
CRED: Make execve() take advantage of copy-on-write credentials Make execve() take advantage of copy-on-write credentials, allowing it to set up the credentials in advance, and then commit the whole lot after the point of no return. This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). The credential bits from struct linux_binprm are, for the most part, replaced with a single credentials pointer (bprm->cred). This means that all the creds can be calculated in advance and then applied at the point of no return with no possibility of failure. I would like to replace bprm->cap_effective with: cap_isclear(bprm->cap_effective) but this seems impossible due to special behaviour for processes of pid 1 (they always retain their parent's capability masks where normally they'd be changed - see cap_bprm_set_creds()). The following sequence of events now happens: (a) At the start of do_execve, the current task's cred_exec_mutex is locked to prevent PTRACE_ATTACH from obsoleting the calculation of creds that we make. (a) prepare_exec_creds() is then called to make a copy of the current task's credentials and prepare it. This copy is then assigned to bprm->cred. This renders security_bprm_alloc() and security_bprm_free() unnecessary, and so they've been removed. (b) The determination of unsafe execution is now performed immediately after (a) rather than later on in the code. The result is stored in bprm->unsafe for future reference. (c) prepare_binprm() is called, possibly multiple times. (i) This applies the result of set[ug]id binaries to the new creds attached to bprm->cred. Personality bit clearance is recorded, but now deferred on the basis that the exec procedure may yet fail. (ii) This then calls the new security_bprm_set_creds(). This should calculate the new LSM and capability credentials into *bprm->cred. This folds together security_bprm_set() and parts of security_bprm_apply_creds() (these two have been removed). Anything that might fail must be done at this point. (iii) bprm->cred_prepared is set to 1. bprm->cred_prepared is 0 on the first pass of the security calculations, and 1 on all subsequent passes. This allows SELinux in (ii) to base its calculations only on the initial script and not on the interpreter. (d) flush_old_exec() is called to commit the task to execution. This performs the following steps with regard to credentials: (i) Clear pdeath_signal and set dumpable on certain circumstances that may not be covered by commit_creds(). (ii) Clear any bits in current->personality that were deferred from (c.i). (e) install_exec_creds() [compute_creds() as was] is called to install the new credentials. This performs the following steps with regard to credentials: (i) Calls security_bprm_committing_creds() to apply any security requirements, such as flushing unauthorised files in SELinux, that must be done before the credentials are changed. This is made up of bits of security_bprm_apply_creds() and security_bprm_post_apply_creds(), both of which have been removed. This function is not allowed to fail; anything that might fail must have been done in (c.ii). (ii) Calls commit_creds() to apply the new credentials in a single assignment (more or less). Possibly pdeath_signal and dumpable should be part of struct creds. (iii) Unlocks the task's cred_replace_mutex, thus allowing PTRACE_ATTACH to take place. (iv) Clears The bprm->cred pointer as the credentials it was holding are now immutable. (v) Calls security_bprm_committed_creds() to apply any security alterations that must be done after the creds have been changed. SELinux uses this to flush signals and signal handlers. (f) If an error occurs before (d.i), bprm_free() will call abort_creds() to destroy the proposed new credentials and will then unlock cred_replace_mutex. No changes to the credentials will have been made. (2) LSM interface. A number of functions have been changed, added or removed: (*) security_bprm_alloc(), ->bprm_alloc_security() (*) security_bprm_free(), ->bprm_free_security() Removed in favour of preparing new credentials and modifying those. (*) security_bprm_apply_creds(), ->bprm_apply_creds() (*) security_bprm_post_apply_creds(), ->bprm_post_apply_creds() Removed; split between security_bprm_set_creds(), security_bprm_committing_creds() and security_bprm_committed_creds(). (*) security_bprm_set(), ->bprm_set_security() Removed; folded into security_bprm_set_creds(). (*) security_bprm_set_creds(), ->bprm_set_creds() New. The new credentials in bprm->creds should be checked and set up as appropriate. bprm->cred_prepared is 0 on the first call, 1 on the second and subsequent calls. (*) security_bprm_committing_creds(), ->bprm_committing_creds() (*) security_bprm_committed_creds(), ->bprm_committed_creds() New. Apply the security effects of the new credentials. This includes closing unauthorised files in SELinux. This function may not fail. When the former is called, the creds haven't yet been applied to the process; when the latter is called, they have. The former may access bprm->cred, the latter may not. (3) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) The bprm_security_struct struct has been removed in favour of using the credentials-under-construction approach. (c) flush_unauthorized_files() now takes a cred pointer and passes it on to inode_has_perm(), file_has_perm() and dentry_open(). Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 23:39:24 +00:00
}
exec: Compute file based creds only once Move the computation of creds from prepare_binfmt into begin_new_exec so that the creds need only be computed once. This is just code reorganization no semantic changes of any kind are made. Moving the computation is safe. I have looked through the kernel and verified none of the binfmts look at bprm->cred directly, and that there are no helpers that look at bprm->cred indirectly. Which means that it is not a problem to compute the bprm->cred later in the execution flow as it is not used until it becomes current->cred. A new function bprm_creds_from_file is added to contain the work that needs to be done. bprm_creds_from_file first computes which file bprm->executable or most likely bprm->file that the bprm->creds will be computed from. The funciton bprm_fill_uid is updated to receive the file instead of accessing bprm->file. The now unnecessary work needed to reset the bprm->cred->euid, and bprm->cred->egid is removed from brpm_fill_uid. A small comment to document that bprm_fill_uid now only deals with the work to handle suid and sgid files. The default case is already heandled by prepare_exec_creds. The function security_bprm_repopulate_creds is renamed security_bprm_creds_from_file and now is explicitly passed the file from which to compute the creds. The documentation of the bprm_creds_from_file security hook is updated to explain when the hook is called and what it needs to do. The file is passed from cap_bprm_creds_from_file into get_file_caps so that the caps are computed for the appropriate file. The now unnecessary work in cap_bprm_creds_from_file to reset the ambient capabilites has been removed. A small comment to document that the work of cap_bprm_creds_from_file is to read capabilities from the files secureity attribute and derive capabilities from the fact the user had uid 0 has been added. Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-05-30 03:00:54 +00:00
static void bprm_fill_uid(struct linux_binprm *bprm, struct file *file)
{
exec: Compute file based creds only once Move the computation of creds from prepare_binfmt into begin_new_exec so that the creds need only be computed once. This is just code reorganization no semantic changes of any kind are made. Moving the computation is safe. I have looked through the kernel and verified none of the binfmts look at bprm->cred directly, and that there are no helpers that look at bprm->cred indirectly. Which means that it is not a problem to compute the bprm->cred later in the execution flow as it is not used until it becomes current->cred. A new function bprm_creds_from_file is added to contain the work that needs to be done. bprm_creds_from_file first computes which file bprm->executable or most likely bprm->file that the bprm->creds will be computed from. The funciton bprm_fill_uid is updated to receive the file instead of accessing bprm->file. The now unnecessary work needed to reset the bprm->cred->euid, and bprm->cred->egid is removed from brpm_fill_uid. A small comment to document that bprm_fill_uid now only deals with the work to handle suid and sgid files. The default case is already heandled by prepare_exec_creds. The function security_bprm_repopulate_creds is renamed security_bprm_creds_from_file and now is explicitly passed the file from which to compute the creds. The documentation of the bprm_creds_from_file security hook is updated to explain when the hook is called and what it needs to do. The file is passed from cap_bprm_creds_from_file into get_file_caps so that the caps are computed for the appropriate file. The now unnecessary work in cap_bprm_creds_from_file to reset the ambient capabilites has been removed. A small comment to document that the work of cap_bprm_creds_from_file is to read capabilities from the files secureity attribute and derive capabilities from the fact the user had uid 0 has been added. Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-05-30 03:00:54 +00:00
/* Handle suid and sgid on files */
struct user_namespace *mnt_userns;
struct inode *inode;
unsigned int mode;
kuid_t uid;
kgid_t gid;
exec: Compute file based creds only once Move the computation of creds from prepare_binfmt into begin_new_exec so that the creds need only be computed once. This is just code reorganization no semantic changes of any kind are made. Moving the computation is safe. I have looked through the kernel and verified none of the binfmts look at bprm->cred directly, and that there are no helpers that look at bprm->cred indirectly. Which means that it is not a problem to compute the bprm->cred later in the execution flow as it is not used until it becomes current->cred. A new function bprm_creds_from_file is added to contain the work that needs to be done. bprm_creds_from_file first computes which file bprm->executable or most likely bprm->file that the bprm->creds will be computed from. The funciton bprm_fill_uid is updated to receive the file instead of accessing bprm->file. The now unnecessary work needed to reset the bprm->cred->euid, and bprm->cred->egid is removed from brpm_fill_uid. A small comment to document that bprm_fill_uid now only deals with the work to handle suid and sgid files. The default case is already heandled by prepare_exec_creds. The function security_bprm_repopulate_creds is renamed security_bprm_creds_from_file and now is explicitly passed the file from which to compute the creds. The documentation of the bprm_creds_from_file security hook is updated to explain when the hook is called and what it needs to do. The file is passed from cap_bprm_creds_from_file into get_file_caps so that the caps are computed for the appropriate file. The now unnecessary work in cap_bprm_creds_from_file to reset the ambient capabilites has been removed. A small comment to document that the work of cap_bprm_creds_from_file is to read capabilities from the files secureity attribute and derive capabilities from the fact the user had uid 0 has been added. Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-05-30 03:00:54 +00:00
if (!mnt_may_suid(file->f_path.mnt))
return;
if (task_no_new_privs(current))
return;
exec: Compute file based creds only once Move the computation of creds from prepare_binfmt into begin_new_exec so that the creds need only be computed once. This is just code reorganization no semantic changes of any kind are made. Moving the computation is safe. I have looked through the kernel and verified none of the binfmts look at bprm->cred directly, and that there are no helpers that look at bprm->cred indirectly. Which means that it is not a problem to compute the bprm->cred later in the execution flow as it is not used until it becomes current->cred. A new function bprm_creds_from_file is added to contain the work that needs to be done. bprm_creds_from_file first computes which file bprm->executable or most likely bprm->file that the bprm->creds will be computed from. The funciton bprm_fill_uid is updated to receive the file instead of accessing bprm->file. The now unnecessary work needed to reset the bprm->cred->euid, and bprm->cred->egid is removed from brpm_fill_uid. A small comment to document that bprm_fill_uid now only deals with the work to handle suid and sgid files. The default case is already heandled by prepare_exec_creds. The function security_bprm_repopulate_creds is renamed security_bprm_creds_from_file and now is explicitly passed the file from which to compute the creds. The documentation of the bprm_creds_from_file security hook is updated to explain when the hook is called and what it needs to do. The file is passed from cap_bprm_creds_from_file into get_file_caps so that the caps are computed for the appropriate file. The now unnecessary work in cap_bprm_creds_from_file to reset the ambient capabilites has been removed. A small comment to document that the work of cap_bprm_creds_from_file is to read capabilities from the files secureity attribute and derive capabilities from the fact the user had uid 0 has been added. Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-05-30 03:00:54 +00:00
inode = file->f_path.dentry->d_inode;
mode = READ_ONCE(inode->i_mode);
if (!(mode & (S_ISUID|S_ISGID)))
return;
mnt_userns = file_mnt_user_ns(file);
/* Be careful if suid/sgid is set */
inode_lock(inode);
/* reload atomically mode/uid/gid now that lock held */
mode = inode->i_mode;
uid = i_uid_into_mnt(mnt_userns, inode);
gid = i_gid_into_mnt(mnt_userns, inode);
inode_unlock(inode);
/* We ignore suid/sgid if there are no mappings for them in the ns */
if (!kuid_has_mapping(bprm->cred->user_ns, uid) ||
!kgid_has_mapping(bprm->cred->user_ns, gid))
return;
if (mode & S_ISUID) {
bprm->per_clear |= PER_CLEAR_ON_SETID;
bprm->cred->euid = uid;
}
if ((mode & (S_ISGID | S_IXGRP)) == (S_ISGID | S_IXGRP)) {
bprm->per_clear |= PER_CLEAR_ON_SETID;
bprm->cred->egid = gid;
}
}
exec: Compute file based creds only once Move the computation of creds from prepare_binfmt into begin_new_exec so that the creds need only be computed once. This is just code reorganization no semantic changes of any kind are made. Moving the computation is safe. I have looked through the kernel and verified none of the binfmts look at bprm->cred directly, and that there are no helpers that look at bprm->cred indirectly. Which means that it is not a problem to compute the bprm->cred later in the execution flow as it is not used until it becomes current->cred. A new function bprm_creds_from_file is added to contain the work that needs to be done. bprm_creds_from_file first computes which file bprm->executable or most likely bprm->file that the bprm->creds will be computed from. The funciton bprm_fill_uid is updated to receive the file instead of accessing bprm->file. The now unnecessary work needed to reset the bprm->cred->euid, and bprm->cred->egid is removed from brpm_fill_uid. A small comment to document that bprm_fill_uid now only deals with the work to handle suid and sgid files. The default case is already heandled by prepare_exec_creds. The function security_bprm_repopulate_creds is renamed security_bprm_creds_from_file and now is explicitly passed the file from which to compute the creds. The documentation of the bprm_creds_from_file security hook is updated to explain when the hook is called and what it needs to do. The file is passed from cap_bprm_creds_from_file into get_file_caps so that the caps are computed for the appropriate file. The now unnecessary work in cap_bprm_creds_from_file to reset the ambient capabilites has been removed. A small comment to document that the work of cap_bprm_creds_from_file is to read capabilities from the files secureity attribute and derive capabilities from the fact the user had uid 0 has been added. Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-05-30 03:00:54 +00:00
/*
* Compute brpm->cred based upon the final binary.
*/
static int bprm_creds_from_file(struct linux_binprm *bprm)
{
/* Compute creds based on which file? */
struct file *file = bprm->execfd_creds ? bprm->executable : bprm->file;
bprm_fill_uid(bprm, file);
return security_bprm_creds_from_file(bprm, file);
}
2014-01-23 23:55:50 +00:00
/*
* Fill the binprm structure from the inode.
exec: Compute file based creds only once Move the computation of creds from prepare_binfmt into begin_new_exec so that the creds need only be computed once. This is just code reorganization no semantic changes of any kind are made. Moving the computation is safe. I have looked through the kernel and verified none of the binfmts look at bprm->cred directly, and that there are no helpers that look at bprm->cred indirectly. Which means that it is not a problem to compute the bprm->cred later in the execution flow as it is not used until it becomes current->cred. A new function bprm_creds_from_file is added to contain the work that needs to be done. bprm_creds_from_file first computes which file bprm->executable or most likely bprm->file that the bprm->creds will be computed from. The funciton bprm_fill_uid is updated to receive the file instead of accessing bprm->file. The now unnecessary work needed to reset the bprm->cred->euid, and bprm->cred->egid is removed from brpm_fill_uid. A small comment to document that bprm_fill_uid now only deals with the work to handle suid and sgid files. The default case is already heandled by prepare_exec_creds. The function security_bprm_repopulate_creds is renamed security_bprm_creds_from_file and now is explicitly passed the file from which to compute the creds. The documentation of the bprm_creds_from_file security hook is updated to explain when the hook is called and what it needs to do. The file is passed from cap_bprm_creds_from_file into get_file_caps so that the caps are computed for the appropriate file. The now unnecessary work in cap_bprm_creds_from_file to reset the ambient capabilites has been removed. A small comment to document that the work of cap_bprm_creds_from_file is to read capabilities from the files secureity attribute and derive capabilities from the fact the user had uid 0 has been added. Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-05-30 03:00:54 +00:00
* Read the first BINPRM_BUF_SIZE bytes
CRED: Make execve() take advantage of copy-on-write credentials Make execve() take advantage of copy-on-write credentials, allowing it to set up the credentials in advance, and then commit the whole lot after the point of no return. This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). The credential bits from struct linux_binprm are, for the most part, replaced with a single credentials pointer (bprm->cred). This means that all the creds can be calculated in advance and then applied at the point of no return with no possibility of failure. I would like to replace bprm->cap_effective with: cap_isclear(bprm->cap_effective) but this seems impossible due to special behaviour for processes of pid 1 (they always retain their parent's capability masks where normally they'd be changed - see cap_bprm_set_creds()). The following sequence of events now happens: (a) At the start of do_execve, the current task's cred_exec_mutex is locked to prevent PTRACE_ATTACH from obsoleting the calculation of creds that we make. (a) prepare_exec_creds() is then called to make a copy of the current task's credentials and prepare it. This copy is then assigned to bprm->cred. This renders security_bprm_alloc() and security_bprm_free() unnecessary, and so they've been removed. (b) The determination of unsafe execution is now performed immediately after (a) rather than later on in the code. The result is stored in bprm->unsafe for future reference. (c) prepare_binprm() is called, possibly multiple times. (i) This applies the result of set[ug]id binaries to the new creds attached to bprm->cred. Personality bit clearance is recorded, but now deferred on the basis that the exec procedure may yet fail. (ii) This then calls the new security_bprm_set_creds(). This should calculate the new LSM and capability credentials into *bprm->cred. This folds together security_bprm_set() and parts of security_bprm_apply_creds() (these two have been removed). Anything that might fail must be done at this point. (iii) bprm->cred_prepared is set to 1. bprm->cred_prepared is 0 on the first pass of the security calculations, and 1 on all subsequent passes. This allows SELinux in (ii) to base its calculations only on the initial script and not on the interpreter. (d) flush_old_exec() is called to commit the task to execution. This performs the following steps with regard to credentials: (i) Clear pdeath_signal and set dumpable on certain circumstances that may not be covered by commit_creds(). (ii) Clear any bits in current->personality that were deferred from (c.i). (e) install_exec_creds() [compute_creds() as was] is called to install the new credentials. This performs the following steps with regard to credentials: (i) Calls security_bprm_committing_creds() to apply any security requirements, such as flushing unauthorised files in SELinux, that must be done before the credentials are changed. This is made up of bits of security_bprm_apply_creds() and security_bprm_post_apply_creds(), both of which have been removed. This function is not allowed to fail; anything that might fail must have been done in (c.ii). (ii) Calls commit_creds() to apply the new credentials in a single assignment (more or less). Possibly pdeath_signal and dumpable should be part of struct creds. (iii) Unlocks the task's cred_replace_mutex, thus allowing PTRACE_ATTACH to take place. (iv) Clears The bprm->cred pointer as the credentials it was holding are now immutable. (v) Calls security_bprm_committed_creds() to apply any security alterations that must be done after the creds have been changed. SELinux uses this to flush signals and signal handlers. (f) If an error occurs before (d.i), bprm_free() will call abort_creds() to destroy the proposed new credentials and will then unlock cred_replace_mutex. No changes to the credentials will have been made. (2) LSM interface. A number of functions have been changed, added or removed: (*) security_bprm_alloc(), ->bprm_alloc_security() (*) security_bprm_free(), ->bprm_free_security() Removed in favour of preparing new credentials and modifying those. (*) security_bprm_apply_creds(), ->bprm_apply_creds() (*) security_bprm_post_apply_creds(), ->bprm_post_apply_creds() Removed; split between security_bprm_set_creds(), security_bprm_committing_creds() and security_bprm_committed_creds(). (*) security_bprm_set(), ->bprm_set_security() Removed; folded into security_bprm_set_creds(). (*) security_bprm_set_creds(), ->bprm_set_creds() New. The new credentials in bprm->creds should be checked and set up as appropriate. bprm->cred_prepared is 0 on the first call, 1 on the second and subsequent calls. (*) security_bprm_committing_creds(), ->bprm_committing_creds() (*) security_bprm_committed_creds(), ->bprm_committed_creds() New. Apply the security effects of the new credentials. This includes closing unauthorised files in SELinux. This function may not fail. When the former is called, the creds haven't yet been applied to the process; when the latter is called, they have. The former may access bprm->cred, the latter may not. (3) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) The bprm_security_struct struct has been removed in favour of using the credentials-under-construction approach. (c) flush_unauthorized_files() now takes a cred pointer and passes it on to inode_has_perm(), file_has_perm() and dentry_open(). Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 23:39:24 +00:00
*
* This may be called multiple times for binary chains (scripts for example).
*/
static int prepare_binprm(struct linux_binprm *bprm)
{
loff_t pos = 0;
CRED: Make execve() take advantage of copy-on-write credentials Make execve() take advantage of copy-on-write credentials, allowing it to set up the credentials in advance, and then commit the whole lot after the point of no return. This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). The credential bits from struct linux_binprm are, for the most part, replaced with a single credentials pointer (bprm->cred). This means that all the creds can be calculated in advance and then applied at the point of no return with no possibility of failure. I would like to replace bprm->cap_effective with: cap_isclear(bprm->cap_effective) but this seems impossible due to special behaviour for processes of pid 1 (they always retain their parent's capability masks where normally they'd be changed - see cap_bprm_set_creds()). The following sequence of events now happens: (a) At the start of do_execve, the current task's cred_exec_mutex is locked to prevent PTRACE_ATTACH from obsoleting the calculation of creds that we make. (a) prepare_exec_creds() is then called to make a copy of the current task's credentials and prepare it. This copy is then assigned to bprm->cred. This renders security_bprm_alloc() and security_bprm_free() unnecessary, and so they've been removed. (b) The determination of unsafe execution is now performed immediately after (a) rather than later on in the code. The result is stored in bprm->unsafe for future reference. (c) prepare_binprm() is called, possibly multiple times. (i) This applies the result of set[ug]id binaries to the new creds attached to bprm->cred. Personality bit clearance is recorded, but now deferred on the basis that the exec procedure may yet fail. (ii) This then calls the new security_bprm_set_creds(). This should calculate the new LSM and capability credentials into *bprm->cred. This folds together security_bprm_set() and parts of security_bprm_apply_creds() (these two have been removed). Anything that might fail must be done at this point. (iii) bprm->cred_prepared is set to 1. bprm->cred_prepared is 0 on the first pass of the security calculations, and 1 on all subsequent passes. This allows SELinux in (ii) to base its calculations only on the initial script and not on the interpreter. (d) flush_old_exec() is called to commit the task to execution. This performs the following steps with regard to credentials: (i) Clear pdeath_signal and set dumpable on certain circumstances that may not be covered by commit_creds(). (ii) Clear any bits in current->personality that were deferred from (c.i). (e) install_exec_creds() [compute_creds() as was] is called to install the new credentials. This performs the following steps with regard to credentials: (i) Calls security_bprm_committing_creds() to apply any security requirements, such as flushing unauthorised files in SELinux, that must be done before the credentials are changed. This is made up of bits of security_bprm_apply_creds() and security_bprm_post_apply_creds(), both of which have been removed. This function is not allowed to fail; anything that might fail must have been done in (c.ii). (ii) Calls commit_creds() to apply the new credentials in a single assignment (more or less). Possibly pdeath_signal and dumpable should be part of struct creds. (iii) Unlocks the task's cred_replace_mutex, thus allowing PTRACE_ATTACH to take place. (iv) Clears The bprm->cred pointer as the credentials it was holding are now immutable. (v) Calls security_bprm_committed_creds() to apply any security alterations that must be done after the creds have been changed. SELinux uses this to flush signals and signal handlers. (f) If an error occurs before (d.i), bprm_free() will call abort_creds() to destroy the proposed new credentials and will then unlock cred_replace_mutex. No changes to the credentials will have been made. (2) LSM interface. A number of functions have been changed, added or removed: (*) security_bprm_alloc(), ->bprm_alloc_security() (*) security_bprm_free(), ->bprm_free_security() Removed in favour of preparing new credentials and modifying those. (*) security_bprm_apply_creds(), ->bprm_apply_creds() (*) security_bprm_post_apply_creds(), ->bprm_post_apply_creds() Removed; split between security_bprm_set_creds(), security_bprm_committing_creds() and security_bprm_committed_creds(). (*) security_bprm_set(), ->bprm_set_security() Removed; folded into security_bprm_set_creds(). (*) security_bprm_set_creds(), ->bprm_set_creds() New. The new credentials in bprm->creds should be checked and set up as appropriate. bprm->cred_prepared is 0 on the first call, 1 on the second and subsequent calls. (*) security_bprm_committing_creds(), ->bprm_committing_creds() (*) security_bprm_committed_creds(), ->bprm_committed_creds() New. Apply the security effects of the new credentials. This includes closing unauthorised files in SELinux. This function may not fail. When the former is called, the creds haven't yet been applied to the process; when the latter is called, they have. The former may access bprm->cred, the latter may not. (3) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) The bprm_security_struct struct has been removed in favour of using the credentials-under-construction approach. (c) flush_unauthorized_files() now takes a cred pointer and passes it on to inode_has_perm(), file_has_perm() and dentry_open(). Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 23:39:24 +00:00
memset(bprm->buf, 0, BINPRM_BUF_SIZE);
return kernel_read(bprm->file, bprm->buf, BINPRM_BUF_SIZE, &pos);
}
/*
* Arguments are '\0' separated strings found at the location bprm->p
* points to; chop off the first by relocating brpm->p to right after
* the first '\0' encountered.
*/
int remove_arg_zero(struct linux_binprm *bprm)
{
int ret = 0;
unsigned long offset;
char *kaddr;
struct page *page;
if (!bprm->argc)
return 0;
do {
offset = bprm->p & ~PAGE_MASK;
page = get_arg_page(bprm, bprm->p, 0);
if (!page) {
ret = -EFAULT;
goto out;
}
kaddr = kmap_atomic(page);
for (; offset < PAGE_SIZE && kaddr[offset];
offset++, bprm->p++)
;
kunmap_atomic(kaddr);
put_arg_page(page);
} while (offset == PAGE_SIZE);
bprm->p++;
bprm->argc--;
ret = 0;
out:
return ret;
}
EXPORT_SYMBOL(remove_arg_zero);
#define printable(c) (((c)=='\t') || ((c)=='\n') || (0x20<=(c) && (c)<=0x7e))
/*
* cycle the list of binary formats handler, until one recognizes the image
*/
exec: Remove recursion from search_binary_handler Recursion in kernel code is generally a bad idea as it can overflow the kernel stack. Recursion in exec also hides that the code is looping and that the loop changes bprm->file. Instead of recursing in search_binary_handler have the methods that would recurse set bprm->interpreter and return 0. Modify exec_binprm to loop when bprm->interpreter is set. Consolidate all of the reassignments of bprm->file in that loop to make it clear what is going on. The structure of the new loop in exec_binprm is that all errors return immediately, while successful completion (ret == 0 && !bprm->interpreter) just breaks out of the loop and runs what exec_bprm has always run upon successful completion. Fail if the an interpreter is being call after execfd has been set. The code has never properly handled an interpreter being called with execfd being set and with reassignments of bprm->file and the assignment of bprm->executable in generic code it has finally become possible to test and fail when if this problematic condition happens. With the reassignments of bprm->file and the assignment of bprm->executable moved into the generic code add a test to see if bprm->executable is being reassigned. In search_binary_handler remove the test for !bprm->file. With all reassignments of bprm->file moved to exec_binprm bprm->file can never be NULL in search_binary_handler. Link: https://lkml.kernel.org/r/87sgfwyd84.fsf_-_@x220.int.ebiederm.org Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-05-18 23:43:20 +00:00
static int search_binary_handler(struct linux_binprm *bprm)
{
bool need_retry = IS_ENABLED(CONFIG_MODULES);
struct linux_binfmt *fmt;
int retval;
retval = prepare_binprm(bprm);
if (retval < 0)
return retval;
retval = security_bprm_check(bprm);
if (retval)
return retval;
retval = -ENOENT;
retry:
read_lock(&binfmt_lock);
list_for_each_entry(fmt, &formats, lh) {
if (!try_module_get(fmt->module))
continue;
read_unlock(&binfmt_lock);
retval = fmt->load_binary(bprm);
read_lock(&binfmt_lock);
put_binfmt(fmt);
exec: Remove recursion from search_binary_handler Recursion in kernel code is generally a bad idea as it can overflow the kernel stack. Recursion in exec also hides that the code is looping and that the loop changes bprm->file. Instead of recursing in search_binary_handler have the methods that would recurse set bprm->interpreter and return 0. Modify exec_binprm to loop when bprm->interpreter is set. Consolidate all of the reassignments of bprm->file in that loop to make it clear what is going on. The structure of the new loop in exec_binprm is that all errors return immediately, while successful completion (ret == 0 && !bprm->interpreter) just breaks out of the loop and runs what exec_bprm has always run upon successful completion. Fail if the an interpreter is being call after execfd has been set. The code has never properly handled an interpreter being called with execfd being set and with reassignments of bprm->file and the assignment of bprm->executable in generic code it has finally become possible to test and fail when if this problematic condition happens. With the reassignments of bprm->file and the assignment of bprm->executable moved into the generic code add a test to see if bprm->executable is being reassigned. In search_binary_handler remove the test for !bprm->file. With all reassignments of bprm->file moved to exec_binprm bprm->file can never be NULL in search_binary_handler. Link: https://lkml.kernel.org/r/87sgfwyd84.fsf_-_@x220.int.ebiederm.org Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-05-18 23:43:20 +00:00
if (bprm->point_of_no_return || (retval != -ENOEXEC)) {
read_unlock(&binfmt_lock);
return retval;
}
}
read_unlock(&binfmt_lock);
if (need_retry) {
if (printable(bprm->buf[0]) && printable(bprm->buf[1]) &&
printable(bprm->buf[2]) && printable(bprm->buf[3]))
return retval;
if (request_module("binfmt-%04x", *(ushort *)(bprm->buf + 2)) < 0)
return retval;
need_retry = false;
goto retry;
}
return retval;
}
static int exec_binprm(struct linux_binprm *bprm)
{
pid_t old_pid, old_vpid;
exec: Remove recursion from search_binary_handler Recursion in kernel code is generally a bad idea as it can overflow the kernel stack. Recursion in exec also hides that the code is looping and that the loop changes bprm->file. Instead of recursing in search_binary_handler have the methods that would recurse set bprm->interpreter and return 0. Modify exec_binprm to loop when bprm->interpreter is set. Consolidate all of the reassignments of bprm->file in that loop to make it clear what is going on. The structure of the new loop in exec_binprm is that all errors return immediately, while successful completion (ret == 0 && !bprm->interpreter) just breaks out of the loop and runs what exec_bprm has always run upon successful completion. Fail if the an interpreter is being call after execfd has been set. The code has never properly handled an interpreter being called with execfd being set and with reassignments of bprm->file and the assignment of bprm->executable in generic code it has finally become possible to test and fail when if this problematic condition happens. With the reassignments of bprm->file and the assignment of bprm->executable moved into the generic code add a test to see if bprm->executable is being reassigned. In search_binary_handler remove the test for !bprm->file. With all reassignments of bprm->file moved to exec_binprm bprm->file can never be NULL in search_binary_handler. Link: https://lkml.kernel.org/r/87sgfwyd84.fsf_-_@x220.int.ebiederm.org Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-05-18 23:43:20 +00:00
int ret, depth;
/* Need to fetch pid before load_binary changes it */
old_pid = current->pid;
rcu_read_lock();
old_vpid = task_pid_nr_ns(current, task_active_pid_ns(current->parent));
rcu_read_unlock();
exec: Remove recursion from search_binary_handler Recursion in kernel code is generally a bad idea as it can overflow the kernel stack. Recursion in exec also hides that the code is looping and that the loop changes bprm->file. Instead of recursing in search_binary_handler have the methods that would recurse set bprm->interpreter and return 0. Modify exec_binprm to loop when bprm->interpreter is set. Consolidate all of the reassignments of bprm->file in that loop to make it clear what is going on. The structure of the new loop in exec_binprm is that all errors return immediately, while successful completion (ret == 0 && !bprm->interpreter) just breaks out of the loop and runs what exec_bprm has always run upon successful completion. Fail if the an interpreter is being call after execfd has been set. The code has never properly handled an interpreter being called with execfd being set and with reassignments of bprm->file and the assignment of bprm->executable in generic code it has finally become possible to test and fail when if this problematic condition happens. With the reassignments of bprm->file and the assignment of bprm->executable moved into the generic code add a test to see if bprm->executable is being reassigned. In search_binary_handler remove the test for !bprm->file. With all reassignments of bprm->file moved to exec_binprm bprm->file can never be NULL in search_binary_handler. Link: https://lkml.kernel.org/r/87sgfwyd84.fsf_-_@x220.int.ebiederm.org Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-05-18 23:43:20 +00:00
/* This allows 4 levels of binfmt rewrites before failing hard. */
for (depth = 0;; depth++) {
struct file *exec;
if (depth > 5)
return -ELOOP;
ret = search_binary_handler(bprm);
if (ret < 0)
return ret;
if (!bprm->interpreter)
break;
exec = bprm->file;
bprm->file = bprm->interpreter;
bprm->interpreter = NULL;
allow_write_access(exec);
if (unlikely(bprm->have_execfd)) {
if (bprm->executable) {
fput(exec);
return -ENOEXEC;
}
bprm->executable = exec;
} else
fput(exec);
}
exec: Remove recursion from search_binary_handler Recursion in kernel code is generally a bad idea as it can overflow the kernel stack. Recursion in exec also hides that the code is looping and that the loop changes bprm->file. Instead of recursing in search_binary_handler have the methods that would recurse set bprm->interpreter and return 0. Modify exec_binprm to loop when bprm->interpreter is set. Consolidate all of the reassignments of bprm->file in that loop to make it clear what is going on. The structure of the new loop in exec_binprm is that all errors return immediately, while successful completion (ret == 0 && !bprm->interpreter) just breaks out of the loop and runs what exec_bprm has always run upon successful completion. Fail if the an interpreter is being call after execfd has been set. The code has never properly handled an interpreter being called with execfd being set and with reassignments of bprm->file and the assignment of bprm->executable in generic code it has finally become possible to test and fail when if this problematic condition happens. With the reassignments of bprm->file and the assignment of bprm->executable moved into the generic code add a test to see if bprm->executable is being reassigned. In search_binary_handler remove the test for !bprm->file. With all reassignments of bprm->file moved to exec_binprm bprm->file can never be NULL in search_binary_handler. Link: https://lkml.kernel.org/r/87sgfwyd84.fsf_-_@x220.int.ebiederm.org Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-05-18 23:43:20 +00:00
audit_bprm(bprm);
trace_sched_process_exec(current, old_pid, bprm);
ptrace_event(PTRACE_EVENT_EXEC, old_vpid);
proc_exec_connector(current);
return 0;
}
/*
* sys_execve() executes a new program.
*/
static int bprm_execve(struct linux_binprm *bprm,
int fd, struct filename *filename, int flags)
{
exec: Remove do_execve_file Now that the last callser has been removed remove this code from exec. For anyone thinking of resurrecing do_execve_file please note that the code was buggy in several fundamental ways. - It did not ensure the file it was passed was read-only and that deny_write_access had been called on it. Which subtlely breaks invaniants in exec. - The caller of do_execve_file was expected to hold and put a reference to the file, but an extra reference for use by exec was not taken so that when exec put it's reference to the file an underflow occured on the file reference count. - The point of the interface was so that a pathname did not need to exist. Which breaks pathname based LSMs. Tetsuo Handa originally reported these issues[1]. While it was clear that deny_write_access was missing the fundamental incompatibility with the passed in O_RDWR filehandle was not immediately recognized. All of these issues were fixed by modifying the usermode driver code to have a path, so it did not need this hack. Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> [1] https://lore.kernel.org/linux-fsdevel/2a8775b4-1dd5-9d5c-aa42-9872445e0942@i-love.sakura.ne.jp/ v1: https://lkml.kernel.org/r/871rm2f0hi.fsf_-_@x220.int.ebiederm.org v2: https://lkml.kernel.org/r/87lfk54p0m.fsf_-_@x220.int.ebiederm.org Link: https://lkml.kernel.org/r/20200702164140.4468-10-ebiederm@xmission.com Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-06-25 18:56:40 +00:00
struct file *file;
int retval;
2009-09-05 18:17:13 +00:00
retval = prepare_bprm_creds(bprm);
if (retval)
exec: Move unshare_files to fix posix file locking during exec Many moons ago the binfmts were doing some very questionable things with file descriptors and an unsharing of the file descriptor table was added to make things better[1][2]. The helper steal_lockss was added to avoid breaking the userspace programs[3][4][6]. Unfortunately it turned out that steal_locks did not work for network file systems[5], so it was removed to see if anyone would complain[7][8]. It was thought at the time that NPTL would not be affected as the unshare_files happened after the other threads were killed[8]. Unfortunately because there was an unshare_files in binfmt_elf.c before the threads were killed this analysis was incorrect. This unshare_files in binfmt_elf.c resulted in the unshares_files happening whenever threads were present. Which led to unshare_files being moved to the start of do_execve[9]. Later the problems were rediscovered and the suggested approach was to readd steal_locks under a different name[10]. I happened to be reviewing patches and I noticed that this approach was a step backwards[11]. I proposed simply moving unshare_files[12] and it was pointed out that moving unshare_files without auditing the code was also unsafe[13]. There were then several attempts to solve this[14][15][16] and I even posted this set of changes[17]. Unfortunately because auditing all of execve is time consuming this change did not make it in at the time. Well now that I am cleaning up exec I have made the time to read through all of the binfmts and the only playing with file descriptors is either the security modules closing them in security_bprm_committing_creds or is in the generic code in fs/exec.c. None of it happens before begin_new_exec is called. So move unshare_files into begin_new_exec, after the point of no return. If memory is very very very low and the application calling exec is sharing file descriptor tables between processes we might fail past the point of no return. Which is unfortunate but no different than any of the other places where we allocate memory after the point of no return. This movement allows another process that shares the file table, or another thread of the same process and that closes files or changes their close on exec behavior and races with execve to cause some unexpected things to happen. There is only one time of check to time of use race and it is just there so that execve fails instead of an interpreter failing when it tries to open the file it is supposed to be interpreting. Failing later if userspace is being silly is not a problem. With this change it the following discription from the removal of steal_locks[8] finally becomes true. Apps using NPTL are not affected, since all other threads are killed before execve. Apps using LinuxThreads are only affected if they - have multiple threads during exec (LinuxThreads doesn't kill other threads, the app may do it with pthread_kill_other_threads_np()) - rely on POSIX locks being inherited across exec Both conditions are documented, but not their interaction. Apps using clone() natively are affected if they - use clone(CLONE_FILES) - rely on POSIX locks being inherited across exec I have investigated some paths to make it possible to solve this without moving unshare_files but they all look more complicated[18]. Reported-by: Daniel P. Berrangé <berrange@redhat.com> Reported-by: Jeff Layton <jlayton@redhat.com> History-tree: git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git [1] 02cda956de0b ("[PATCH] unshare_files" [2] 04e9bcb4d106 ("[PATCH] use new unshare_files helper") [3] 088f5d7244de ("[PATCH] add steal_locks helper") [4] 02c541ec8ffa ("[PATCH] use new steal_locks helper") [5] https://lkml.kernel.org/r/E1FLIlF-0007zR-00@dorka.pomaz.szeredi.hu [6] https://lkml.kernel.org/r/0060321191605.GB15997@sorel.sous-sol.org [7] https://lkml.kernel.org/r/E1FLwjC-0000kJ-00@dorka.pomaz.szeredi.hu [8] c89681ed7d0e ("[PATCH] remove steal_locks()") [9] fd8328be874f ("[PATCH] sanitize handling of shared descriptor tables in failing execve()") [10] https://lkml.kernel.org/r/20180317142520.30520-1-jlayton@kernel.org [11] https://lkml.kernel.org/r/87r2nwqk73.fsf@xmission.com [12] https://lkml.kernel.org/r/87bmfgvg8w.fsf@xmission.com [13] https://lkml.kernel.org/r/20180322111424.GE30522@ZenIV.linux.org.uk [14] https://lkml.kernel.org/r/20180827174722.3723-1-jlayton@kernel.org [15] https://lkml.kernel.org/r/20180830172423.21964-1-jlayton@kernel.org [16] https://lkml.kernel.org/r/20180914105310.6454-1-jlayton@kernel.org [17] https://lkml.kernel.org/r/87a7ohs5ow.fsf@xmission.com [18] https://lkml.kernel.org/r/87pn8c1uj6.fsf_-_@x220.int.ebiederm.org Acked-by: Christian Brauner <christian.brauner@ubuntu.com> v1: https://lkml.kernel.org/r/20200817220425.9389-1-ebiederm@xmission.com Link: https://lkml.kernel.org/r/20201120231441.29911-1-ebiederm@xmission.com Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2020-11-20 23:14:18 +00:00
return retval;
2014-01-23 23:55:50 +00:00
check_unsafe_exec(bprm);
2009-09-05 18:17:13 +00:00
current->in_execve = 1;
CRED: Make execve() take advantage of copy-on-write credentials Make execve() take advantage of copy-on-write credentials, allowing it to set up the credentials in advance, and then commit the whole lot after the point of no return. This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). The credential bits from struct linux_binprm are, for the most part, replaced with a single credentials pointer (bprm->cred). This means that all the creds can be calculated in advance and then applied at the point of no return with no possibility of failure. I would like to replace bprm->cap_effective with: cap_isclear(bprm->cap_effective) but this seems impossible due to special behaviour for processes of pid 1 (they always retain their parent's capability masks where normally they'd be changed - see cap_bprm_set_creds()). The following sequence of events now happens: (a) At the start of do_execve, the current task's cred_exec_mutex is locked to prevent PTRACE_ATTACH from obsoleting the calculation of creds that we make. (a) prepare_exec_creds() is then called to make a copy of the current task's credentials and prepare it. This copy is then assigned to bprm->cred. This renders security_bprm_alloc() and security_bprm_free() unnecessary, and so they've been removed. (b) The determination of unsafe execution is now performed immediately after (a) rather than later on in the code. The result is stored in bprm->unsafe for future reference. (c) prepare_binprm() is called, possibly multiple times. (i) This applies the result of set[ug]id binaries to the new creds attached to bprm->cred. Personality bit clearance is recorded, but now deferred on the basis that the exec procedure may yet fail. (ii) This then calls the new security_bprm_set_creds(). This should calculate the new LSM and capability credentials into *bprm->cred. This folds together security_bprm_set() and parts of security_bprm_apply_creds() (these two have been removed). Anything that might fail must be done at this point. (iii) bprm->cred_prepared is set to 1. bprm->cred_prepared is 0 on the first pass of the security calculations, and 1 on all subsequent passes. This allows SELinux in (ii) to base its calculations only on the initial script and not on the interpreter. (d) flush_old_exec() is called to commit the task to execution. This performs the following steps with regard to credentials: (i) Clear pdeath_signal and set dumpable on certain circumstances that may not be covered by commit_creds(). (ii) Clear any bits in current->personality that were deferred from (c.i). (e) install_exec_creds() [compute_creds() as was] is called to install the new credentials. This performs the following steps with regard to credentials: (i) Calls security_bprm_committing_creds() to apply any security requirements, such as flushing unauthorised files in SELinux, that must be done before the credentials are changed. This is made up of bits of security_bprm_apply_creds() and security_bprm_post_apply_creds(), both of which have been removed. This function is not allowed to fail; anything that might fail must have been done in (c.ii). (ii) Calls commit_creds() to apply the new credentials in a single assignment (more or less). Possibly pdeath_signal and dumpable should be part of struct creds. (iii) Unlocks the task's cred_replace_mutex, thus allowing PTRACE_ATTACH to take place. (iv) Clears The bprm->cred pointer as the credentials it was holding are now immutable. (v) Calls security_bprm_committed_creds() to apply any security alterations that must be done after the creds have been changed. SELinux uses this to flush signals and signal handlers. (f) If an error occurs before (d.i), bprm_free() will call abort_creds() to destroy the proposed new credentials and will then unlock cred_replace_mutex. No changes to the credentials will have been made. (2) LSM interface. A number of functions have been changed, added or removed: (*) security_bprm_alloc(), ->bprm_alloc_security() (*) security_bprm_free(), ->bprm_free_security() Removed in favour of preparing new credentials and modifying those. (*) security_bprm_apply_creds(), ->bprm_apply_creds() (*) security_bprm_post_apply_creds(), ->bprm_post_apply_creds() Removed; split between security_bprm_set_creds(), security_bprm_committing_creds() and security_bprm_committed_creds(). (*) security_bprm_set(), ->bprm_set_security() Removed; folded into security_bprm_set_creds(). (*) security_bprm_set_creds(), ->bprm_set_creds() New. The new credentials in bprm->creds should be checked and set up as appropriate. bprm->cred_prepared is 0 on the first call, 1 on the second and subsequent calls. (*) security_bprm_committing_creds(), ->bprm_committing_creds() (*) security_bprm_committed_creds(), ->bprm_committed_creds() New. Apply the security effects of the new credentials. This includes closing unauthorised files in SELinux. This function may not fail. When the former is called, the creds haven't yet been applied to the process; when the latter is called, they have. The former may access bprm->cred, the latter may not. (3) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) The bprm_security_struct struct has been removed in favour of using the credentials-under-construction approach. (c) flush_unauthorized_files() now takes a cred pointer and passes it on to inode_has_perm(), file_has_perm() and dentry_open(). Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 23:39:24 +00:00
exec: Remove do_execve_file Now that the last callser has been removed remove this code from exec. For anyone thinking of resurrecing do_execve_file please note that the code was buggy in several fundamental ways. - It did not ensure the file it was passed was read-only and that deny_write_access had been called on it. Which subtlely breaks invaniants in exec. - The caller of do_execve_file was expected to hold and put a reference to the file, but an extra reference for use by exec was not taken so that when exec put it's reference to the file an underflow occured on the file reference count. - The point of the interface was so that a pathname did not need to exist. Which breaks pathname based LSMs. Tetsuo Handa originally reported these issues[1]. While it was clear that deny_write_access was missing the fundamental incompatibility with the passed in O_RDWR filehandle was not immediately recognized. All of these issues were fixed by modifying the usermode driver code to have a path, so it did not need this hack. Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> [1] https://lore.kernel.org/linux-fsdevel/2a8775b4-1dd5-9d5c-aa42-9872445e0942@i-love.sakura.ne.jp/ v1: https://lkml.kernel.org/r/871rm2f0hi.fsf_-_@x220.int.ebiederm.org v2: https://lkml.kernel.org/r/87lfk54p0m.fsf_-_@x220.int.ebiederm.org Link: https://lkml.kernel.org/r/20200702164140.4468-10-ebiederm@xmission.com Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-06-25 18:56:40 +00:00
file = do_open_execat(fd, filename, flags);
retval = PTR_ERR(file);
if (IS_ERR(file))
goto out_unmark;
sched_exec();
bprm->file = file;
exec: Move initialization of bprm->filename into alloc_bprm Currently it is necessary for the usermode helper code and the code that launches init to use set_fs so that pages coming from the kernel look like they are coming from userspace. To allow that usage of set_fs to be removed cleanly the argument copying from userspace needs to happen earlier. Move the computation of bprm->filename and possible allocation of a name in the case of execveat into alloc_bprm to make that possible. The exectuable name, the arguments, and the environment are copied into the new usermode stack which is stored in bprm until exec passes the point of no return. As the executable name is copied first onto the usermode stack it needs to be known. As there are no dependencies to computing the executable name, compute it early in alloc_bprm. As an implementation detail if the filename needs to be generated because it embeds a file descriptor store that filename in a new field bprm->fdpath, and free it in free_bprm. Previously this was done in an independent variable pathbuf. I have renamed pathbuf fdpath because fdpath is more suggestive of what kind of path is in the variable. I moved fdpath into struct linux_binprm because it is tightly tied to the other variables in struct linux_binprm, and as such is needed to allow the call alloc_binprm to move. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lkml.kernel.org/r/87k0z66x8f.fsf@x220.int.ebiederm.org Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-07-11 13:16:15 +00:00
/*
* Record that a name derived from an O_CLOEXEC fd will be
exec: Move unshare_files to fix posix file locking during exec Many moons ago the binfmts were doing some very questionable things with file descriptors and an unsharing of the file descriptor table was added to make things better[1][2]. The helper steal_lockss was added to avoid breaking the userspace programs[3][4][6]. Unfortunately it turned out that steal_locks did not work for network file systems[5], so it was removed to see if anyone would complain[7][8]. It was thought at the time that NPTL would not be affected as the unshare_files happened after the other threads were killed[8]. Unfortunately because there was an unshare_files in binfmt_elf.c before the threads were killed this analysis was incorrect. This unshare_files in binfmt_elf.c resulted in the unshares_files happening whenever threads were present. Which led to unshare_files being moved to the start of do_execve[9]. Later the problems were rediscovered and the suggested approach was to readd steal_locks under a different name[10]. I happened to be reviewing patches and I noticed that this approach was a step backwards[11]. I proposed simply moving unshare_files[12] and it was pointed out that moving unshare_files without auditing the code was also unsafe[13]. There were then several attempts to solve this[14][15][16] and I even posted this set of changes[17]. Unfortunately because auditing all of execve is time consuming this change did not make it in at the time. Well now that I am cleaning up exec I have made the time to read through all of the binfmts and the only playing with file descriptors is either the security modules closing them in security_bprm_committing_creds or is in the generic code in fs/exec.c. None of it happens before begin_new_exec is called. So move unshare_files into begin_new_exec, after the point of no return. If memory is very very very low and the application calling exec is sharing file descriptor tables between processes we might fail past the point of no return. Which is unfortunate but no different than any of the other places where we allocate memory after the point of no return. This movement allows another process that shares the file table, or another thread of the same process and that closes files or changes their close on exec behavior and races with execve to cause some unexpected things to happen. There is only one time of check to time of use race and it is just there so that execve fails instead of an interpreter failing when it tries to open the file it is supposed to be interpreting. Failing later if userspace is being silly is not a problem. With this change it the following discription from the removal of steal_locks[8] finally becomes true. Apps using NPTL are not affected, since all other threads are killed before execve. Apps using LinuxThreads are only affected if they - have multiple threads during exec (LinuxThreads doesn't kill other threads, the app may do it with pthread_kill_other_threads_np()) - rely on POSIX locks being inherited across exec Both conditions are documented, but not their interaction. Apps using clone() natively are affected if they - use clone(CLONE_FILES) - rely on POSIX locks being inherited across exec I have investigated some paths to make it possible to solve this without moving unshare_files but they all look more complicated[18]. Reported-by: Daniel P. Berrangé <berrange@redhat.com> Reported-by: Jeff Layton <jlayton@redhat.com> History-tree: git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git [1] 02cda956de0b ("[PATCH] unshare_files" [2] 04e9bcb4d106 ("[PATCH] use new unshare_files helper") [3] 088f5d7244de ("[PATCH] add steal_locks helper") [4] 02c541ec8ffa ("[PATCH] use new steal_locks helper") [5] https://lkml.kernel.org/r/E1FLIlF-0007zR-00@dorka.pomaz.szeredi.hu [6] https://lkml.kernel.org/r/0060321191605.GB15997@sorel.sous-sol.org [7] https://lkml.kernel.org/r/E1FLwjC-0000kJ-00@dorka.pomaz.szeredi.hu [8] c89681ed7d0e ("[PATCH] remove steal_locks()") [9] fd8328be874f ("[PATCH] sanitize handling of shared descriptor tables in failing execve()") [10] https://lkml.kernel.org/r/20180317142520.30520-1-jlayton@kernel.org [11] https://lkml.kernel.org/r/87r2nwqk73.fsf@xmission.com [12] https://lkml.kernel.org/r/87bmfgvg8w.fsf@xmission.com [13] https://lkml.kernel.org/r/20180322111424.GE30522@ZenIV.linux.org.uk [14] https://lkml.kernel.org/r/20180827174722.3723-1-jlayton@kernel.org [15] https://lkml.kernel.org/r/20180830172423.21964-1-jlayton@kernel.org [16] https://lkml.kernel.org/r/20180914105310.6454-1-jlayton@kernel.org [17] https://lkml.kernel.org/r/87a7ohs5ow.fsf@xmission.com [18] https://lkml.kernel.org/r/87pn8c1uj6.fsf_-_@x220.int.ebiederm.org Acked-by: Christian Brauner <christian.brauner@ubuntu.com> v1: https://lkml.kernel.org/r/20200817220425.9389-1-ebiederm@xmission.com Link: https://lkml.kernel.org/r/20201120231441.29911-1-ebiederm@xmission.com Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2020-11-20 23:14:18 +00:00
* inaccessible after exec. This allows the code in exec to
* choose to fail when the executable is not mmaped into the
* interpreter and an open file descriptor is not passed to
* the interpreter. This makes for a better user experience
* than having the interpreter start and then immediately fail
* when it finds the executable is inaccessible.
exec: Move initialization of bprm->filename into alloc_bprm Currently it is necessary for the usermode helper code and the code that launches init to use set_fs so that pages coming from the kernel look like they are coming from userspace. To allow that usage of set_fs to be removed cleanly the argument copying from userspace needs to happen earlier. Move the computation of bprm->filename and possible allocation of a name in the case of execveat into alloc_bprm to make that possible. The exectuable name, the arguments, and the environment are copied into the new usermode stack which is stored in bprm until exec passes the point of no return. As the executable name is copied first onto the usermode stack it needs to be known. As there are no dependencies to computing the executable name, compute it early in alloc_bprm. As an implementation detail if the filename needs to be generated because it embeds a file descriptor store that filename in a new field bprm->fdpath, and free it in free_bprm. Previously this was done in an independent variable pathbuf. I have renamed pathbuf fdpath because fdpath is more suggestive of what kind of path is in the variable. I moved fdpath into struct linux_binprm because it is tightly tied to the other variables in struct linux_binprm, and as such is needed to allow the call alloc_binprm to move. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lkml.kernel.org/r/87k0z66x8f.fsf@x220.int.ebiederm.org Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-07-11 13:16:15 +00:00
*/
if (bprm->fdpath && get_close_on_exec(fd))
exec: Move initialization of bprm->filename into alloc_bprm Currently it is necessary for the usermode helper code and the code that launches init to use set_fs so that pages coming from the kernel look like they are coming from userspace. To allow that usage of set_fs to be removed cleanly the argument copying from userspace needs to happen earlier. Move the computation of bprm->filename and possible allocation of a name in the case of execveat into alloc_bprm to make that possible. The exectuable name, the arguments, and the environment are copied into the new usermode stack which is stored in bprm until exec passes the point of no return. As the executable name is copied first onto the usermode stack it needs to be known. As there are no dependencies to computing the executable name, compute it early in alloc_bprm. As an implementation detail if the filename needs to be generated because it embeds a file descriptor store that filename in a new field bprm->fdpath, and free it in free_bprm. Previously this was done in an independent variable pathbuf. I have renamed pathbuf fdpath because fdpath is more suggestive of what kind of path is in the variable. I moved fdpath into struct linux_binprm because it is tightly tied to the other variables in struct linux_binprm, and as such is needed to allow the call alloc_binprm to move. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lkml.kernel.org/r/87k0z66x8f.fsf@x220.int.ebiederm.org Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-07-11 13:16:15 +00:00
bprm->interp_flags |= BINPRM_FLAGS_PATH_INACCESSIBLE;
/* Set the unchanging part of bprm->cred */
retval = security_bprm_creds_for_exec(bprm);
if (retval)
goto out;
retval = exec_binprm(bprm);
CRED: Make execve() take advantage of copy-on-write credentials Make execve() take advantage of copy-on-write credentials, allowing it to set up the credentials in advance, and then commit the whole lot after the point of no return. This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). The credential bits from struct linux_binprm are, for the most part, replaced with a single credentials pointer (bprm->cred). This means that all the creds can be calculated in advance and then applied at the point of no return with no possibility of failure. I would like to replace bprm->cap_effective with: cap_isclear(bprm->cap_effective) but this seems impossible due to special behaviour for processes of pid 1 (they always retain their parent's capability masks where normally they'd be changed - see cap_bprm_set_creds()). The following sequence of events now happens: (a) At the start of do_execve, the current task's cred_exec_mutex is locked to prevent PTRACE_ATTACH from obsoleting the calculation of creds that we make. (a) prepare_exec_creds() is then called to make a copy of the current task's credentials and prepare it. This copy is then assigned to bprm->cred. This renders security_bprm_alloc() and security_bprm_free() unnecessary, and so they've been removed. (b) The determination of unsafe execution is now performed immediately after (a) rather than later on in the code. The result is stored in bprm->unsafe for future reference. (c) prepare_binprm() is called, possibly multiple times. (i) This applies the result of set[ug]id binaries to the new creds attached to bprm->cred. Personality bit clearance is recorded, but now deferred on the basis that the exec procedure may yet fail. (ii) This then calls the new security_bprm_set_creds(). This should calculate the new LSM and capability credentials into *bprm->cred. This folds together security_bprm_set() and parts of security_bprm_apply_creds() (these two have been removed). Anything that might fail must be done at this point. (iii) bprm->cred_prepared is set to 1. bprm->cred_prepared is 0 on the first pass of the security calculations, and 1 on all subsequent passes. This allows SELinux in (ii) to base its calculations only on the initial script and not on the interpreter. (d) flush_old_exec() is called to commit the task to execution. This performs the following steps with regard to credentials: (i) Clear pdeath_signal and set dumpable on certain circumstances that may not be covered by commit_creds(). (ii) Clear any bits in current->personality that were deferred from (c.i). (e) install_exec_creds() [compute_creds() as was] is called to install the new credentials. This performs the following steps with regard to credentials: (i) Calls security_bprm_committing_creds() to apply any security requirements, such as flushing unauthorised files in SELinux, that must be done before the credentials are changed. This is made up of bits of security_bprm_apply_creds() and security_bprm_post_apply_creds(), both of which have been removed. This function is not allowed to fail; anything that might fail must have been done in (c.ii). (ii) Calls commit_creds() to apply the new credentials in a single assignment (more or less). Possibly pdeath_signal and dumpable should be part of struct creds. (iii) Unlocks the task's cred_replace_mutex, thus allowing PTRACE_ATTACH to take place. (iv) Clears The bprm->cred pointer as the credentials it was holding are now immutable. (v) Calls security_bprm_committed_creds() to apply any security alterations that must be done after the creds have been changed. SELinux uses this to flush signals and signal handlers. (f) If an error occurs before (d.i), bprm_free() will call abort_creds() to destroy the proposed new credentials and will then unlock cred_replace_mutex. No changes to the credentials will have been made. (2) LSM interface. A number of functions have been changed, added or removed: (*) security_bprm_alloc(), ->bprm_alloc_security() (*) security_bprm_free(), ->bprm_free_security() Removed in favour of preparing new credentials and modifying those. (*) security_bprm_apply_creds(), ->bprm_apply_creds() (*) security_bprm_post_apply_creds(), ->bprm_post_apply_creds() Removed; split between security_bprm_set_creds(), security_bprm_committing_creds() and security_bprm_committed_creds(). (*) security_bprm_set(), ->bprm_set_security() Removed; folded into security_bprm_set_creds(). (*) security_bprm_set_creds(), ->bprm_set_creds() New. The new credentials in bprm->creds should be checked and set up as appropriate. bprm->cred_prepared is 0 on the first call, 1 on the second and subsequent calls. (*) security_bprm_committing_creds(), ->bprm_committing_creds() (*) security_bprm_committed_creds(), ->bprm_committed_creds() New. Apply the security effects of the new credentials. This includes closing unauthorised files in SELinux. This function may not fail. When the former is called, the creds haven't yet been applied to the process; when the latter is called, they have. The former may access bprm->cred, the latter may not. (3) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) The bprm_security_struct struct has been removed in favour of using the credentials-under-construction approach. (c) flush_unauthorized_files() now takes a cred pointer and passes it on to inode_has_perm(), file_has_perm() and dentry_open(). Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 23:39:24 +00:00
if (retval < 0)
goto out;
CRED: Make execve() take advantage of copy-on-write credentials Make execve() take advantage of copy-on-write credentials, allowing it to set up the credentials in advance, and then commit the whole lot after the point of no return. This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). The credential bits from struct linux_binprm are, for the most part, replaced with a single credentials pointer (bprm->cred). This means that all the creds can be calculated in advance and then applied at the point of no return with no possibility of failure. I would like to replace bprm->cap_effective with: cap_isclear(bprm->cap_effective) but this seems impossible due to special behaviour for processes of pid 1 (they always retain their parent's capability masks where normally they'd be changed - see cap_bprm_set_creds()). The following sequence of events now happens: (a) At the start of do_execve, the current task's cred_exec_mutex is locked to prevent PTRACE_ATTACH from obsoleting the calculation of creds that we make. (a) prepare_exec_creds() is then called to make a copy of the current task's credentials and prepare it. This copy is then assigned to bprm->cred. This renders security_bprm_alloc() and security_bprm_free() unnecessary, and so they've been removed. (b) The determination of unsafe execution is now performed immediately after (a) rather than later on in the code. The result is stored in bprm->unsafe for future reference. (c) prepare_binprm() is called, possibly multiple times. (i) This applies the result of set[ug]id binaries to the new creds attached to bprm->cred. Personality bit clearance is recorded, but now deferred on the basis that the exec procedure may yet fail. (ii) This then calls the new security_bprm_set_creds(). This should calculate the new LSM and capability credentials into *bprm->cred. This folds together security_bprm_set() and parts of security_bprm_apply_creds() (these two have been removed). Anything that might fail must be done at this point. (iii) bprm->cred_prepared is set to 1. bprm->cred_prepared is 0 on the first pass of the security calculations, and 1 on all subsequent passes. This allows SELinux in (ii) to base its calculations only on the initial script and not on the interpreter. (d) flush_old_exec() is called to commit the task to execution. This performs the following steps with regard to credentials: (i) Clear pdeath_signal and set dumpable on certain circumstances that may not be covered by commit_creds(). (ii) Clear any bits in current->personality that were deferred from (c.i). (e) install_exec_creds() [compute_creds() as was] is called to install the new credentials. This performs the following steps with regard to credentials: (i) Calls security_bprm_committing_creds() to apply any security requirements, such as flushing unauthorised files in SELinux, that must be done before the credentials are changed. This is made up of bits of security_bprm_apply_creds() and security_bprm_post_apply_creds(), both of which have been removed. This function is not allowed to fail; anything that might fail must have been done in (c.ii). (ii) Calls commit_creds() to apply the new credentials in a single assignment (more or less). Possibly pdeath_signal and dumpable should be part of struct creds. (iii) Unlocks the task's cred_replace_mutex, thus allowing PTRACE_ATTACH to take place. (iv) Clears The bprm->cred pointer as the credentials it was holding are now immutable. (v) Calls security_bprm_committed_creds() to apply any security alterations that must be done after the creds have been changed. SELinux uses this to flush signals and signal handlers. (f) If an error occurs before (d.i), bprm_free() will call abort_creds() to destroy the proposed new credentials and will then unlock cred_replace_mutex. No changes to the credentials will have been made. (2) LSM interface. A number of functions have been changed, added or removed: (*) security_bprm_alloc(), ->bprm_alloc_security() (*) security_bprm_free(), ->bprm_free_security() Removed in favour of preparing new credentials and modifying those. (*) security_bprm_apply_creds(), ->bprm_apply_creds() (*) security_bprm_post_apply_creds(), ->bprm_post_apply_creds() Removed; split between security_bprm_set_creds(), security_bprm_committing_creds() and security_bprm_committed_creds(). (*) security_bprm_set(), ->bprm_set_security() Removed; folded into security_bprm_set_creds(). (*) security_bprm_set_creds(), ->bprm_set_creds() New. The new credentials in bprm->creds should be checked and set up as appropriate. bprm->cred_prepared is 0 on the first call, 1 on the second and subsequent calls. (*) security_bprm_committing_creds(), ->bprm_committing_creds() (*) security_bprm_committed_creds(), ->bprm_committed_creds() New. Apply the security effects of the new credentials. This includes closing unauthorised files in SELinux. This function may not fail. When the former is called, the creds haven't yet been applied to the process; when the latter is called, they have. The former may access bprm->cred, the latter may not. (3) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) The bprm_security_struct struct has been removed in favour of using the credentials-under-construction approach. (c) flush_unauthorized_files() now takes a cred pointer and passes it on to inode_has_perm(), file_has_perm() and dentry_open(). Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 23:39:24 +00:00
/* execve succeeded */
current->fs->in_exec = 0;
current->in_execve = 0;
rseq: Introduce restartable sequences system call Expose a new system call allowing each thread to register one userspace memory area to be used as an ABI between kernel and user-space for two purposes: user-space restartable sequences and quick access to read the current CPU number value from user-space. * Restartable sequences (per-cpu atomics) Restartables sequences allow user-space to perform update operations on per-cpu data without requiring heavy-weight atomic operations. The restartable critical sections (percpu atomics) work has been started by Paul Turner and Andrew Hunter. It lets the kernel handle restart of critical sections. [1] [2] The re-implementation proposed here brings a few simplifications to the ABI which facilitates porting to other architectures and speeds up the user-space fast path. Here are benchmarks of various rseq use-cases. Test hardware: arm32: ARMv7 Processor rev 4 (v7l) "Cubietruck", 2-core x86-64: Intel E5-2630 v3@2.40GHz, 16-core, hyperthreading The following benchmarks were all performed on a single thread. * Per-CPU statistic counter increment getcpu+atomic (ns/op) rseq (ns/op) speedup arm32: 344.0 31.4 11.0 x86-64: 15.3 2.0 7.7 * LTTng-UST: write event 32-bit header, 32-bit payload into tracer per-cpu buffer getcpu+atomic (ns/op) rseq (ns/op) speedup arm32: 2502.0 2250.0 1.1 x86-64: 117.4 98.0 1.2 * liburcu percpu: lock-unlock pair, dereference, read/compare word getcpu+atomic (ns/op) rseq (ns/op) speedup arm32: 751.0 128.5 5.8 x86-64: 53.4 28.6 1.9 * jemalloc memory allocator adapted to use rseq Using rseq with per-cpu memory pools in jemalloc at Facebook (based on rseq 2016 implementation): The production workload response-time has 1-2% gain avg. latency, and the P99 overall latency drops by 2-3%. * Reading the current CPU number Speeding up reading the current CPU number on which the caller thread is running is done by keeping the current CPU number up do date within the cpu_id field of the memory area registered by the thread. This is done by making scheduler preemption set the TIF_NOTIFY_RESUME flag on the current thread. Upon return to user-space, a notify-resume handler updates the current CPU value within the registered user-space memory area. User-space can then read the current CPU number directly from memory. Keeping the current cpu id in a memory area shared between kernel and user-space is an improvement over current mechanisms available to read the current CPU number, which has the following benefits over alternative approaches: - 35x speedup on ARM vs system call through glibc - 20x speedup on x86 compared to calling glibc, which calls vdso executing a "lsl" instruction, - 14x speedup on x86 compared to inlined "lsl" instruction, - Unlike vdso approaches, this cpu_id value can be read from an inline assembly, which makes it a useful building block for restartable sequences. - The approach of reading the cpu id through memory mapping shared between kernel and user-space is portable (e.g. ARM), which is not the case for the lsl-based x86 vdso. On x86, yet another possible approach would be to use the gs segment selector to point to user-space per-cpu data. This approach performs similarly to the cpu id cache, but it has two disadvantages: it is not portable, and it is incompatible with existing applications already using the gs segment selector for other purposes. Benchmarking various approaches for reading the current CPU number: ARMv7 Processor rev 4 (v7l) Machine model: Cubietruck - Baseline (empty loop): 8.4 ns - Read CPU from rseq cpu_id: 16.7 ns - Read CPU from rseq cpu_id (lazy register): 19.8 ns - glibc 2.19-0ubuntu6.6 getcpu: 301.8 ns - getcpu system call: 234.9 ns x86-64 Intel(R) Xeon(R) CPU E5-2630 v3 @ 2.40GHz: - Baseline (empty loop): 0.8 ns - Read CPU from rseq cpu_id: 0.8 ns - Read CPU from rseq cpu_id (lazy register): 0.8 ns - Read using gs segment selector: 0.8 ns - "lsl" inline assembly: 13.0 ns - glibc 2.19-0ubuntu6 getcpu: 16.6 ns - getcpu system call: 53.9 ns - Speed (benchmark taken on v8 of patchset) Running 10 runs of hackbench -l 100000 seems to indicate, contrary to expectations, that enabling CONFIG_RSEQ slightly accelerates the scheduler: Configuration: 2 sockets * 8-core Intel(R) Xeon(R) CPU E5-2630 v3 @ 2.40GHz (directly on hardware, hyperthreading disabled in BIOS, energy saving disabled in BIOS, turboboost disabled in BIOS, cpuidle.off=1 kernel parameter), with a Linux v4.6 defconfig+localyesconfig, restartable sequences series applied. * CONFIG_RSEQ=n avg.: 41.37 s std.dev.: 0.36 s * CONFIG_RSEQ=y avg.: 40.46 s std.dev.: 0.33 s - Size On x86-64, between CONFIG_RSEQ=n/y, the text size increase of vmlinux is 567 bytes, and the data size increase of vmlinux is 5696 bytes. [1] https://lwn.net/Articles/650333/ [2] http://www.linuxplumbersconf.org/2013/ocw/system/presentations/1695/original/LPC%20-%20PerCpu%20Atomics.pdf Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Joel Fernandes <joelaf@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Watson <davejwatson@fb.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Chris Lameter <cl@linux.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Hunter <ahh@google.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com> Cc: Paul Turner <pjt@google.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ben Maurer <bmaurer@fb.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-api@vger.kernel.org Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20151027235635.16059.11630.stgit@pjt-glaptop.roam.corp.google.com Link: http://lkml.kernel.org/r/20150624222609.6116.86035.stgit@kitami.mtv.corp.google.com Link: https://lkml.kernel.org/r/20180602124408.8430-3-mathieu.desnoyers@efficios.com
2018-06-02 12:43:54 +00:00
rseq_execve(current);
CRED: Make execve() take advantage of copy-on-write credentials Make execve() take advantage of copy-on-write credentials, allowing it to set up the credentials in advance, and then commit the whole lot after the point of no return. This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). The credential bits from struct linux_binprm are, for the most part, replaced with a single credentials pointer (bprm->cred). This means that all the creds can be calculated in advance and then applied at the point of no return with no possibility of failure. I would like to replace bprm->cap_effective with: cap_isclear(bprm->cap_effective) but this seems impossible due to special behaviour for processes of pid 1 (they always retain their parent's capability masks where normally they'd be changed - see cap_bprm_set_creds()). The following sequence of events now happens: (a) At the start of do_execve, the current task's cred_exec_mutex is locked to prevent PTRACE_ATTACH from obsoleting the calculation of creds that we make. (a) prepare_exec_creds() is then called to make a copy of the current task's credentials and prepare it. This copy is then assigned to bprm->cred. This renders security_bprm_alloc() and security_bprm_free() unnecessary, and so they've been removed. (b) The determination of unsafe execution is now performed immediately after (a) rather than later on in the code. The result is stored in bprm->unsafe for future reference. (c) prepare_binprm() is called, possibly multiple times. (i) This applies the result of set[ug]id binaries to the new creds attached to bprm->cred. Personality bit clearance is recorded, but now deferred on the basis that the exec procedure may yet fail. (ii) This then calls the new security_bprm_set_creds(). This should calculate the new LSM and capability credentials into *bprm->cred. This folds together security_bprm_set() and parts of security_bprm_apply_creds() (these two have been removed). Anything that might fail must be done at this point. (iii) bprm->cred_prepared is set to 1. bprm->cred_prepared is 0 on the first pass of the security calculations, and 1 on all subsequent passes. This allows SELinux in (ii) to base its calculations only on the initial script and not on the interpreter. (d) flush_old_exec() is called to commit the task to execution. This performs the following steps with regard to credentials: (i) Clear pdeath_signal and set dumpable on certain circumstances that may not be covered by commit_creds(). (ii) Clear any bits in current->personality that were deferred from (c.i). (e) install_exec_creds() [compute_creds() as was] is called to install the new credentials. This performs the following steps with regard to credentials: (i) Calls security_bprm_committing_creds() to apply any security requirements, such as flushing unauthorised files in SELinux, that must be done before the credentials are changed. This is made up of bits of security_bprm_apply_creds() and security_bprm_post_apply_creds(), both of which have been removed. This function is not allowed to fail; anything that might fail must have been done in (c.ii). (ii) Calls commit_creds() to apply the new credentials in a single assignment (more or less). Possibly pdeath_signal and dumpable should be part of struct creds. (iii) Unlocks the task's cred_replace_mutex, thus allowing PTRACE_ATTACH to take place. (iv) Clears The bprm->cred pointer as the credentials it was holding are now immutable. (v) Calls security_bprm_committed_creds() to apply any security alterations that must be done after the creds have been changed. SELinux uses this to flush signals and signal handlers. (f) If an error occurs before (d.i), bprm_free() will call abort_creds() to destroy the proposed new credentials and will then unlock cred_replace_mutex. No changes to the credentials will have been made. (2) LSM interface. A number of functions have been changed, added or removed: (*) security_bprm_alloc(), ->bprm_alloc_security() (*) security_bprm_free(), ->bprm_free_security() Removed in favour of preparing new credentials and modifying those. (*) security_bprm_apply_creds(), ->bprm_apply_creds() (*) security_bprm_post_apply_creds(), ->bprm_post_apply_creds() Removed; split between security_bprm_set_creds(), security_bprm_committing_creds() and security_bprm_committed_creds(). (*) security_bprm_set(), ->bprm_set_security() Removed; folded into security_bprm_set_creds(). (*) security_bprm_set_creds(), ->bprm_set_creds() New. The new credentials in bprm->creds should be checked and set up as appropriate. bprm->cred_prepared is 0 on the first call, 1 on the second and subsequent calls. (*) security_bprm_committing_creds(), ->bprm_committing_creds() (*) security_bprm_committed_creds(), ->bprm_committed_creds() New. Apply the security effects of the new credentials. This includes closing unauthorised files in SELinux. This function may not fail. When the former is called, the creds haven't yet been applied to the process; when the latter is called, they have. The former may access bprm->cred, the latter may not. (3) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) The bprm_security_struct struct has been removed in favour of using the credentials-under-construction approach. (c) flush_unauthorized_files() now takes a cred pointer and passes it on to inode_has_perm(), file_has_perm() and dentry_open(). Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 23:39:24 +00:00
acct_update_integrals(current);
task_numa_free(current, false);
CRED: Make execve() take advantage of copy-on-write credentials Make execve() take advantage of copy-on-write credentials, allowing it to set up the credentials in advance, and then commit the whole lot after the point of no return. This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). The credential bits from struct linux_binprm are, for the most part, replaced with a single credentials pointer (bprm->cred). This means that all the creds can be calculated in advance and then applied at the point of no return with no possibility of failure. I would like to replace bprm->cap_effective with: cap_isclear(bprm->cap_effective) but this seems impossible due to special behaviour for processes of pid 1 (they always retain their parent's capability masks where normally they'd be changed - see cap_bprm_set_creds()). The following sequence of events now happens: (a) At the start of do_execve, the current task's cred_exec_mutex is locked to prevent PTRACE_ATTACH from obsoleting the calculation of creds that we make. (a) prepare_exec_creds() is then called to make a copy of the current task's credentials and prepare it. This copy is then assigned to bprm->cred. This renders security_bprm_alloc() and security_bprm_free() unnecessary, and so they've been removed. (b) The determination of unsafe execution is now performed immediately after (a) rather than later on in the code. The result is stored in bprm->unsafe for future reference. (c) prepare_binprm() is called, possibly multiple times. (i) This applies the result of set[ug]id binaries to the new creds attached to bprm->cred. Personality bit clearance is recorded, but now deferred on the basis that the exec procedure may yet fail. (ii) This then calls the new security_bprm_set_creds(). This should calculate the new LSM and capability credentials into *bprm->cred. This folds together security_bprm_set() and parts of security_bprm_apply_creds() (these two have been removed). Anything that might fail must be done at this point. (iii) bprm->cred_prepared is set to 1. bprm->cred_prepared is 0 on the first pass of the security calculations, and 1 on all subsequent passes. This allows SELinux in (ii) to base its calculations only on the initial script and not on the interpreter. (d) flush_old_exec() is called to commit the task to execution. This performs the following steps with regard to credentials: (i) Clear pdeath_signal and set dumpable on certain circumstances that may not be covered by commit_creds(). (ii) Clear any bits in current->personality that were deferred from (c.i). (e) install_exec_creds() [compute_creds() as was] is called to install the new credentials. This performs the following steps with regard to credentials: (i) Calls security_bprm_committing_creds() to apply any security requirements, such as flushing unauthorised files in SELinux, that must be done before the credentials are changed. This is made up of bits of security_bprm_apply_creds() and security_bprm_post_apply_creds(), both of which have been removed. This function is not allowed to fail; anything that might fail must have been done in (c.ii). (ii) Calls commit_creds() to apply the new credentials in a single assignment (more or less). Possibly pdeath_signal and dumpable should be part of struct creds. (iii) Unlocks the task's cred_replace_mutex, thus allowing PTRACE_ATTACH to take place. (iv) Clears The bprm->cred pointer as the credentials it was holding are now immutable. (v) Calls security_bprm_committed_creds() to apply any security alterations that must be done after the creds have been changed. SELinux uses this to flush signals and signal handlers. (f) If an error occurs before (d.i), bprm_free() will call abort_creds() to destroy the proposed new credentials and will then unlock cred_replace_mutex. No changes to the credentials will have been made. (2) LSM interface. A number of functions have been changed, added or removed: (*) security_bprm_alloc(), ->bprm_alloc_security() (*) security_bprm_free(), ->bprm_free_security() Removed in favour of preparing new credentials and modifying those. (*) security_bprm_apply_creds(), ->bprm_apply_creds() (*) security_bprm_post_apply_creds(), ->bprm_post_apply_creds() Removed; split between security_bprm_set_creds(), security_bprm_committing_creds() and security_bprm_committed_creds(). (*) security_bprm_set(), ->bprm_set_security() Removed; folded into security_bprm_set_creds(). (*) security_bprm_set_creds(), ->bprm_set_creds() New. The new credentials in bprm->creds should be checked and set up as appropriate. bprm->cred_prepared is 0 on the first call, 1 on the second and subsequent calls. (*) security_bprm_committing_creds(), ->bprm_committing_creds() (*) security_bprm_committed_creds(), ->bprm_committed_creds() New. Apply the security effects of the new credentials. This includes closing unauthorised files in SELinux. This function may not fail. When the former is called, the creds haven't yet been applied to the process; when the latter is called, they have. The former may access bprm->cred, the latter may not. (3) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) The bprm_security_struct struct has been removed in favour of using the credentials-under-construction approach. (c) flush_unauthorized_files() now takes a cred pointer and passes it on to inode_has_perm(), file_has_perm() and dentry_open(). Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 23:39:24 +00:00
return retval;
CRED: Make execve() take advantage of copy-on-write credentials Make execve() take advantage of copy-on-write credentials, allowing it to set up the credentials in advance, and then commit the whole lot after the point of no return. This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). The credential bits from struct linux_binprm are, for the most part, replaced with a single credentials pointer (bprm->cred). This means that all the creds can be calculated in advance and then applied at the point of no return with no possibility of failure. I would like to replace bprm->cap_effective with: cap_isclear(bprm->cap_effective) but this seems impossible due to special behaviour for processes of pid 1 (they always retain their parent's capability masks where normally they'd be changed - see cap_bprm_set_creds()). The following sequence of events now happens: (a) At the start of do_execve, the current task's cred_exec_mutex is locked to prevent PTRACE_ATTACH from obsoleting the calculation of creds that we make. (a) prepare_exec_creds() is then called to make a copy of the current task's credentials and prepare it. This copy is then assigned to bprm->cred. This renders security_bprm_alloc() and security_bprm_free() unnecessary, and so they've been removed. (b) The determination of unsafe execution is now performed immediately after (a) rather than later on in the code. The result is stored in bprm->unsafe for future reference. (c) prepare_binprm() is called, possibly multiple times. (i) This applies the result of set[ug]id binaries to the new creds attached to bprm->cred. Personality bit clearance is recorded, but now deferred on the basis that the exec procedure may yet fail. (ii) This then calls the new security_bprm_set_creds(). This should calculate the new LSM and capability credentials into *bprm->cred. This folds together security_bprm_set() and parts of security_bprm_apply_creds() (these two have been removed). Anything that might fail must be done at this point. (iii) bprm->cred_prepared is set to 1. bprm->cred_prepared is 0 on the first pass of the security calculations, and 1 on all subsequent passes. This allows SELinux in (ii) to base its calculations only on the initial script and not on the interpreter. (d) flush_old_exec() is called to commit the task to execution. This performs the following steps with regard to credentials: (i) Clear pdeath_signal and set dumpable on certain circumstances that may not be covered by commit_creds(). (ii) Clear any bits in current->personality that were deferred from (c.i). (e) install_exec_creds() [compute_creds() as was] is called to install the new credentials. This performs the following steps with regard to credentials: (i) Calls security_bprm_committing_creds() to apply any security requirements, such as flushing unauthorised files in SELinux, that must be done before the credentials are changed. This is made up of bits of security_bprm_apply_creds() and security_bprm_post_apply_creds(), both of which have been removed. This function is not allowed to fail; anything that might fail must have been done in (c.ii). (ii) Calls commit_creds() to apply the new credentials in a single assignment (more or less). Possibly pdeath_signal and dumpable should be part of struct creds. (iii) Unlocks the task's cred_replace_mutex, thus allowing PTRACE_ATTACH to take place. (iv) Clears The bprm->cred pointer as the credentials it was holding are now immutable. (v) Calls security_bprm_committed_creds() to apply any security alterations that must be done after the creds have been changed. SELinux uses this to flush signals and signal handlers. (f) If an error occurs before (d.i), bprm_free() will call abort_creds() to destroy the proposed new credentials and will then unlock cred_replace_mutex. No changes to the credentials will have been made. (2) LSM interface. A number of functions have been changed, added or removed: (*) security_bprm_alloc(), ->bprm_alloc_security() (*) security_bprm_free(), ->bprm_free_security() Removed in favour of preparing new credentials and modifying those. (*) security_bprm_apply_creds(), ->bprm_apply_creds() (*) security_bprm_post_apply_creds(), ->bprm_post_apply_creds() Removed; split between security_bprm_set_creds(), security_bprm_committing_creds() and security_bprm_committed_creds(). (*) security_bprm_set(), ->bprm_set_security() Removed; folded into security_bprm_set_creds(). (*) security_bprm_set_creds(), ->bprm_set_creds() New. The new credentials in bprm->creds should be checked and set up as appropriate. bprm->cred_prepared is 0 on the first call, 1 on the second and subsequent calls. (*) security_bprm_committing_creds(), ->bprm_committing_creds() (*) security_bprm_committed_creds(), ->bprm_committed_creds() New. Apply the security effects of the new credentials. This includes closing unauthorised files in SELinux. This function may not fail. When the former is called, the creds haven't yet been applied to the process; when the latter is called, they have. The former may access bprm->cred, the latter may not. (3) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) The bprm_security_struct struct has been removed in favour of using the credentials-under-construction approach. (c) flush_unauthorized_files() now takes a cred pointer and passes it on to inode_has_perm(), file_has_perm() and dentry_open(). Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 23:39:24 +00:00
out:
/*
* If past the point of no return ensure the code never
* returns to the userspace process. Use an existing fatal
* signal if present otherwise terminate the process with
* SIGSEGV.
*/
if (bprm->point_of_no_return && !fatal_signal_pending(current))
force_fatal_sig(SIGSEGV);
out_unmark:
2014-01-23 23:55:50 +00:00
current->fs->in_exec = 0;
current->in_execve = 0;
CRED: Make execve() take advantage of copy-on-write credentials Make execve() take advantage of copy-on-write credentials, allowing it to set up the credentials in advance, and then commit the whole lot after the point of no return. This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). The credential bits from struct linux_binprm are, for the most part, replaced with a single credentials pointer (bprm->cred). This means that all the creds can be calculated in advance and then applied at the point of no return with no possibility of failure. I would like to replace bprm->cap_effective with: cap_isclear(bprm->cap_effective) but this seems impossible due to special behaviour for processes of pid 1 (they always retain their parent's capability masks where normally they'd be changed - see cap_bprm_set_creds()). The following sequence of events now happens: (a) At the start of do_execve, the current task's cred_exec_mutex is locked to prevent PTRACE_ATTACH from obsoleting the calculation of creds that we make. (a) prepare_exec_creds() is then called to make a copy of the current task's credentials and prepare it. This copy is then assigned to bprm->cred. This renders security_bprm_alloc() and security_bprm_free() unnecessary, and so they've been removed. (b) The determination of unsafe execution is now performed immediately after (a) rather than later on in the code. The result is stored in bprm->unsafe for future reference. (c) prepare_binprm() is called, possibly multiple times. (i) This applies the result of set[ug]id binaries to the new creds attached to bprm->cred. Personality bit clearance is recorded, but now deferred on the basis that the exec procedure may yet fail. (ii) This then calls the new security_bprm_set_creds(). This should calculate the new LSM and capability credentials into *bprm->cred. This folds together security_bprm_set() and parts of security_bprm_apply_creds() (these two have been removed). Anything that might fail must be done at this point. (iii) bprm->cred_prepared is set to 1. bprm->cred_prepared is 0 on the first pass of the security calculations, and 1 on all subsequent passes. This allows SELinux in (ii) to base its calculations only on the initial script and not on the interpreter. (d) flush_old_exec() is called to commit the task to execution. This performs the following steps with regard to credentials: (i) Clear pdeath_signal and set dumpable on certain circumstances that may not be covered by commit_creds(). (ii) Clear any bits in current->personality that were deferred from (c.i). (e) install_exec_creds() [compute_creds() as was] is called to install the new credentials. This performs the following steps with regard to credentials: (i) Calls security_bprm_committing_creds() to apply any security requirements, such as flushing unauthorised files in SELinux, that must be done before the credentials are changed. This is made up of bits of security_bprm_apply_creds() and security_bprm_post_apply_creds(), both of which have been removed. This function is not allowed to fail; anything that might fail must have been done in (c.ii). (ii) Calls commit_creds() to apply the new credentials in a single assignment (more or less). Possibly pdeath_signal and dumpable should be part of struct creds. (iii) Unlocks the task's cred_replace_mutex, thus allowing PTRACE_ATTACH to take place. (iv) Clears The bprm->cred pointer as the credentials it was holding are now immutable. (v) Calls security_bprm_committed_creds() to apply any security alterations that must be done after the creds have been changed. SELinux uses this to flush signals and signal handlers. (f) If an error occurs before (d.i), bprm_free() will call abort_creds() to destroy the proposed new credentials and will then unlock cred_replace_mutex. No changes to the credentials will have been made. (2) LSM interface. A number of functions have been changed, added or removed: (*) security_bprm_alloc(), ->bprm_alloc_security() (*) security_bprm_free(), ->bprm_free_security() Removed in favour of preparing new credentials and modifying those. (*) security_bprm_apply_creds(), ->bprm_apply_creds() (*) security_bprm_post_apply_creds(), ->bprm_post_apply_creds() Removed; split between security_bprm_set_creds(), security_bprm_committing_creds() and security_bprm_committed_creds(). (*) security_bprm_set(), ->bprm_set_security() Removed; folded into security_bprm_set_creds(). (*) security_bprm_set_creds(), ->bprm_set_creds() New. The new credentials in bprm->creds should be checked and set up as appropriate. bprm->cred_prepared is 0 on the first call, 1 on the second and subsequent calls. (*) security_bprm_committing_creds(), ->bprm_committing_creds() (*) security_bprm_committed_creds(), ->bprm_committed_creds() New. Apply the security effects of the new credentials. This includes closing unauthorised files in SELinux. This function may not fail. When the former is called, the creds haven't yet been applied to the process; when the latter is called, they have. The former may access bprm->cred, the latter may not. (3) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) The bprm_security_struct struct has been removed in favour of using the credentials-under-construction approach. (c) flush_unauthorized_files() now takes a cred pointer and passes it on to inode_has_perm(), file_has_perm() and dentry_open(). Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 23:39:24 +00:00
return retval;
}
static int do_execveat_common(int fd, struct filename *filename,
struct user_arg_ptr argv,
struct user_arg_ptr envp,
int flags)
{
struct linux_binprm *bprm;
int retval;
if (IS_ERR(filename))
return PTR_ERR(filename);
/*
* We move the actual failure in case of RLIMIT_NPROC excess from
* set*uid() to execve() because too many poorly written programs
* don't check setuid() return code. Here we additionally recheck
* whether NPROC limit is still exceeded.
*/
if ((current->flags & PF_NPROC_EXCEEDED) &&
is_ucounts_overlimit(current_ucounts(), UCOUNT_RLIMIT_NPROC, rlimit(RLIMIT_NPROC))) {
retval = -EAGAIN;
goto out_ret;
}
/* We're below the limit (still or again), so we don't want to make
* further execve() calls fail. */
current->flags &= ~PF_NPROC_EXCEEDED;
bprm = alloc_bprm(fd, filename);
if (IS_ERR(bprm)) {
retval = PTR_ERR(bprm);
goto out_ret;
}
retval = count(argv, MAX_ARG_STRINGS);
if (retval < 0)
goto out_free;
bprm->argc = retval;
retval = count(envp, MAX_ARG_STRINGS);
if (retval < 0)
goto out_free;
bprm->envc = retval;
retval = bprm_stack_limits(bprm);
if (retval < 0)
goto out_free;
retval = copy_string_kernel(bprm->filename, bprm);
if (retval < 0)
goto out_free;
bprm->exec = bprm->p;
retval = copy_strings(bprm->envc, envp, bprm);
if (retval < 0)
goto out_free;
retval = copy_strings(bprm->argc, argv, bprm);
if (retval < 0)
goto out_free;
retval = bprm_execve(bprm, fd, filename, flags);
CRED: Make execve() take advantage of copy-on-write credentials Make execve() take advantage of copy-on-write credentials, allowing it to set up the credentials in advance, and then commit the whole lot after the point of no return. This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). The credential bits from struct linux_binprm are, for the most part, replaced with a single credentials pointer (bprm->cred). This means that all the creds can be calculated in advance and then applied at the point of no return with no possibility of failure. I would like to replace bprm->cap_effective with: cap_isclear(bprm->cap_effective) but this seems impossible due to special behaviour for processes of pid 1 (they always retain their parent's capability masks where normally they'd be changed - see cap_bprm_set_creds()). The following sequence of events now happens: (a) At the start of do_execve, the current task's cred_exec_mutex is locked to prevent PTRACE_ATTACH from obsoleting the calculation of creds that we make. (a) prepare_exec_creds() is then called to make a copy of the current task's credentials and prepare it. This copy is then assigned to bprm->cred. This renders security_bprm_alloc() and security_bprm_free() unnecessary, and so they've been removed. (b) The determination of unsafe execution is now performed immediately after (a) rather than later on in the code. The result is stored in bprm->unsafe for future reference. (c) prepare_binprm() is called, possibly multiple times. (i) This applies the result of set[ug]id binaries to the new creds attached to bprm->cred. Personality bit clearance is recorded, but now deferred on the basis that the exec procedure may yet fail. (ii) This then calls the new security_bprm_set_creds(). This should calculate the new LSM and capability credentials into *bprm->cred. This folds together security_bprm_set() and parts of security_bprm_apply_creds() (these two have been removed). Anything that might fail must be done at this point. (iii) bprm->cred_prepared is set to 1. bprm->cred_prepared is 0 on the first pass of the security calculations, and 1 on all subsequent passes. This allows SELinux in (ii) to base its calculations only on the initial script and not on the interpreter. (d) flush_old_exec() is called to commit the task to execution. This performs the following steps with regard to credentials: (i) Clear pdeath_signal and set dumpable on certain circumstances that may not be covered by commit_creds(). (ii) Clear any bits in current->personality that were deferred from (c.i). (e) install_exec_creds() [compute_creds() as was] is called to install the new credentials. This performs the following steps with regard to credentials: (i) Calls security_bprm_committing_creds() to apply any security requirements, such as flushing unauthorised files in SELinux, that must be done before the credentials are changed. This is made up of bits of security_bprm_apply_creds() and security_bprm_post_apply_creds(), both of which have been removed. This function is not allowed to fail; anything that might fail must have been done in (c.ii). (ii) Calls commit_creds() to apply the new credentials in a single assignment (more or less). Possibly pdeath_signal and dumpable should be part of struct creds. (iii) Unlocks the task's cred_replace_mutex, thus allowing PTRACE_ATTACH to take place. (iv) Clears The bprm->cred pointer as the credentials it was holding are now immutable. (v) Calls security_bprm_committed_creds() to apply any security alterations that must be done after the creds have been changed. SELinux uses this to flush signals and signal handlers. (f) If an error occurs before (d.i), bprm_free() will call abort_creds() to destroy the proposed new credentials and will then unlock cred_replace_mutex. No changes to the credentials will have been made. (2) LSM interface. A number of functions have been changed, added or removed: (*) security_bprm_alloc(), ->bprm_alloc_security() (*) security_bprm_free(), ->bprm_free_security() Removed in favour of preparing new credentials and modifying those. (*) security_bprm_apply_creds(), ->bprm_apply_creds() (*) security_bprm_post_apply_creds(), ->bprm_post_apply_creds() Removed; split between security_bprm_set_creds(), security_bprm_committing_creds() and security_bprm_committed_creds(). (*) security_bprm_set(), ->bprm_set_security() Removed; folded into security_bprm_set_creds(). (*) security_bprm_set_creds(), ->bprm_set_creds() New. The new credentials in bprm->creds should be checked and set up as appropriate. bprm->cred_prepared is 0 on the first call, 1 on the second and subsequent calls. (*) security_bprm_committing_creds(), ->bprm_committing_creds() (*) security_bprm_committed_creds(), ->bprm_committed_creds() New. Apply the security effects of the new credentials. This includes closing unauthorised files in SELinux. This function may not fail. When the former is called, the creds haven't yet been applied to the process; when the latter is called, they have. The former may access bprm->cred, the latter may not. (3) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) The bprm_security_struct struct has been removed in favour of using the credentials-under-construction approach. (c) flush_unauthorized_files() now takes a cred pointer and passes it on to inode_has_perm(), file_has_perm() and dentry_open(). Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 23:39:24 +00:00
out_free:
free_bprm(bprm);
out_ret:
exec: Remove do_execve_file Now that the last callser has been removed remove this code from exec. For anyone thinking of resurrecing do_execve_file please note that the code was buggy in several fundamental ways. - It did not ensure the file it was passed was read-only and that deny_write_access had been called on it. Which subtlely breaks invaniants in exec. - The caller of do_execve_file was expected to hold and put a reference to the file, but an extra reference for use by exec was not taken so that when exec put it's reference to the file an underflow occured on the file reference count. - The point of the interface was so that a pathname did not need to exist. Which breaks pathname based LSMs. Tetsuo Handa originally reported these issues[1]. While it was clear that deny_write_access was missing the fundamental incompatibility with the passed in O_RDWR filehandle was not immediately recognized. All of these issues were fixed by modifying the usermode driver code to have a path, so it did not need this hack. Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> [1] https://lore.kernel.org/linux-fsdevel/2a8775b4-1dd5-9d5c-aa42-9872445e0942@i-love.sakura.ne.jp/ v1: https://lkml.kernel.org/r/871rm2f0hi.fsf_-_@x220.int.ebiederm.org v2: https://lkml.kernel.org/r/87lfk54p0m.fsf_-_@x220.int.ebiederm.org Link: https://lkml.kernel.org/r/20200702164140.4468-10-ebiederm@xmission.com Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-06-25 18:56:40 +00:00
putname(filename);
return retval;
}
int kernel_execve(const char *kernel_filename,
const char *const *argv, const char *const *envp)
{
struct filename *filename;
struct linux_binprm *bprm;
int fd = AT_FDCWD;
int retval;
filename = getname_kernel(kernel_filename);
if (IS_ERR(filename))
return PTR_ERR(filename);
bprm = alloc_bprm(fd, filename);
if (IS_ERR(bprm)) {
retval = PTR_ERR(bprm);
goto out_ret;
}
retval = count_strings_kernel(argv);
if (retval < 0)
goto out_free;
bprm->argc = retval;
retval = count_strings_kernel(envp);
if (retval < 0)
goto out_free;
bprm->envc = retval;
retval = bprm_stack_limits(bprm);
if (retval < 0)
goto out_free;
retval = copy_string_kernel(bprm->filename, bprm);
if (retval < 0)
goto out_free;
bprm->exec = bprm->p;
retval = copy_strings_kernel(bprm->envc, envp, bprm);
if (retval < 0)
goto out_free;
retval = copy_strings_kernel(bprm->argc, argv, bprm);
if (retval < 0)
goto out_free;
retval = bprm_execve(bprm, fd, filename, 0);
out_free:
free_bprm(bprm);
out_ret:
putname(filename);
return retval;
}
static int do_execve(struct filename *filename,
const char __user *const __user *__argv,
const char __user *const __user *__envp)
{
struct user_arg_ptr argv = { .ptr.native = __argv };
struct user_arg_ptr envp = { .ptr.native = __envp };
syscalls: implement execveat() system call This patchset adds execveat(2) for x86, and is derived from Meredydd Luff's patch from Sept 2012 (https://lkml.org/lkml/2012/9/11/528). The primary aim of adding an execveat syscall is to allow an implementation of fexecve(3) that does not rely on the /proc filesystem, at least for executables (rather than scripts). The current glibc version of fexecve(3) is implemented via /proc, which causes problems in sandboxed or otherwise restricted environments. Given the desire for a /proc-free fexecve() implementation, HPA suggested (https://lkml.org/lkml/2006/7/11/556) that an execveat(2) syscall would be an appropriate generalization. Also, having a new syscall means that it can take a flags argument without back-compatibility concerns. The current implementation just defines the AT_EMPTY_PATH and AT_SYMLINK_NOFOLLOW flags, but other flags could be added in future -- for example, flags for new namespaces (as suggested at https://lkml.org/lkml/2006/7/11/474). Related history: - https://lkml.org/lkml/2006/12/27/123 is an example of someone realizing that fexecve() is likely to fail in a chroot environment. - http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=514043 covered documenting the /proc requirement of fexecve(3) in its manpage, to "prevent other people from wasting their time". - https://bugzilla.redhat.com/show_bug.cgi?id=241609 described a problem where a process that did setuid() could not fexecve() because it no longer had access to /proc/self/fd; this has since been fixed. This patch (of 4): Add a new execveat(2) system call. execveat() is to execve() as openat() is to open(): it takes a file descriptor that refers to a directory, and resolves the filename relative to that. In addition, if the filename is empty and AT_EMPTY_PATH is specified, execveat() executes the file to which the file descriptor refers. This replicates the functionality of fexecve(), which is a system call in other UNIXen, but in Linux glibc it depends on opening "/proc/self/fd/<fd>" (and so relies on /proc being mounted). The filename fed to the executed program as argv[0] (or the name of the script fed to a script interpreter) will be of the form "/dev/fd/<fd>" (for an empty filename) or "/dev/fd/<fd>/<filename>", effectively reflecting how the executable was found. This does however mean that execution of a script in a /proc-less environment won't work; also, script execution via an O_CLOEXEC file descriptor fails (as the file will not be accessible after exec). Based on patches by Meredydd Luff. Signed-off-by: David Drysdale <drysdale@google.com> Cc: Meredydd Luff <meredydd@senatehouse.org> Cc: Shuah Khan <shuah.kh@samsung.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rich Felker <dalias@aerifal.cx> Cc: Christoph Hellwig <hch@infradead.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:57:29 +00:00
return do_execveat_common(AT_FDCWD, filename, argv, envp, 0);
}
static int do_execveat(int fd, struct filename *filename,
syscalls: implement execveat() system call This patchset adds execveat(2) for x86, and is derived from Meredydd Luff's patch from Sept 2012 (https://lkml.org/lkml/2012/9/11/528). The primary aim of adding an execveat syscall is to allow an implementation of fexecve(3) that does not rely on the /proc filesystem, at least for executables (rather than scripts). The current glibc version of fexecve(3) is implemented via /proc, which causes problems in sandboxed or otherwise restricted environments. Given the desire for a /proc-free fexecve() implementation, HPA suggested (https://lkml.org/lkml/2006/7/11/556) that an execveat(2) syscall would be an appropriate generalization. Also, having a new syscall means that it can take a flags argument without back-compatibility concerns. The current implementation just defines the AT_EMPTY_PATH and AT_SYMLINK_NOFOLLOW flags, but other flags could be added in future -- for example, flags for new namespaces (as suggested at https://lkml.org/lkml/2006/7/11/474). Related history: - https://lkml.org/lkml/2006/12/27/123 is an example of someone realizing that fexecve() is likely to fail in a chroot environment. - http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=514043 covered documenting the /proc requirement of fexecve(3) in its manpage, to "prevent other people from wasting their time". - https://bugzilla.redhat.com/show_bug.cgi?id=241609 described a problem where a process that did setuid() could not fexecve() because it no longer had access to /proc/self/fd; this has since been fixed. This patch (of 4): Add a new execveat(2) system call. execveat() is to execve() as openat() is to open(): it takes a file descriptor that refers to a directory, and resolves the filename relative to that. In addition, if the filename is empty and AT_EMPTY_PATH is specified, execveat() executes the file to which the file descriptor refers. This replicates the functionality of fexecve(), which is a system call in other UNIXen, but in Linux glibc it depends on opening "/proc/self/fd/<fd>" (and so relies on /proc being mounted). The filename fed to the executed program as argv[0] (or the name of the script fed to a script interpreter) will be of the form "/dev/fd/<fd>" (for an empty filename) or "/dev/fd/<fd>/<filename>", effectively reflecting how the executable was found. This does however mean that execution of a script in a /proc-less environment won't work; also, script execution via an O_CLOEXEC file descriptor fails (as the file will not be accessible after exec). Based on patches by Meredydd Luff. Signed-off-by: David Drysdale <drysdale@google.com> Cc: Meredydd Luff <meredydd@senatehouse.org> Cc: Shuah Khan <shuah.kh@samsung.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rich Felker <dalias@aerifal.cx> Cc: Christoph Hellwig <hch@infradead.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:57:29 +00:00
const char __user *const __user *__argv,
const char __user *const __user *__envp,
int flags)
{
struct user_arg_ptr argv = { .ptr.native = __argv };
struct user_arg_ptr envp = { .ptr.native = __envp };
return do_execveat_common(fd, filename, argv, envp, flags);
}
#ifdef CONFIG_COMPAT
static int compat_do_execve(struct filename *filename,
const compat_uptr_t __user *__argv,
const compat_uptr_t __user *__envp)
{
struct user_arg_ptr argv = {
.is_compat = true,
.ptr.compat = __argv,
};
struct user_arg_ptr envp = {
.is_compat = true,
.ptr.compat = __envp,
};
syscalls: implement execveat() system call This patchset adds execveat(2) for x86, and is derived from Meredydd Luff's patch from Sept 2012 (https://lkml.org/lkml/2012/9/11/528). The primary aim of adding an execveat syscall is to allow an implementation of fexecve(3) that does not rely on the /proc filesystem, at least for executables (rather than scripts). The current glibc version of fexecve(3) is implemented via /proc, which causes problems in sandboxed or otherwise restricted environments. Given the desire for a /proc-free fexecve() implementation, HPA suggested (https://lkml.org/lkml/2006/7/11/556) that an execveat(2) syscall would be an appropriate generalization. Also, having a new syscall means that it can take a flags argument without back-compatibility concerns. The current implementation just defines the AT_EMPTY_PATH and AT_SYMLINK_NOFOLLOW flags, but other flags could be added in future -- for example, flags for new namespaces (as suggested at https://lkml.org/lkml/2006/7/11/474). Related history: - https://lkml.org/lkml/2006/12/27/123 is an example of someone realizing that fexecve() is likely to fail in a chroot environment. - http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=514043 covered documenting the /proc requirement of fexecve(3) in its manpage, to "prevent other people from wasting their time". - https://bugzilla.redhat.com/show_bug.cgi?id=241609 described a problem where a process that did setuid() could not fexecve() because it no longer had access to /proc/self/fd; this has since been fixed. This patch (of 4): Add a new execveat(2) system call. execveat() is to execve() as openat() is to open(): it takes a file descriptor that refers to a directory, and resolves the filename relative to that. In addition, if the filename is empty and AT_EMPTY_PATH is specified, execveat() executes the file to which the file descriptor refers. This replicates the functionality of fexecve(), which is a system call in other UNIXen, but in Linux glibc it depends on opening "/proc/self/fd/<fd>" (and so relies on /proc being mounted). The filename fed to the executed program as argv[0] (or the name of the script fed to a script interpreter) will be of the form "/dev/fd/<fd>" (for an empty filename) or "/dev/fd/<fd>/<filename>", effectively reflecting how the executable was found. This does however mean that execution of a script in a /proc-less environment won't work; also, script execution via an O_CLOEXEC file descriptor fails (as the file will not be accessible after exec). Based on patches by Meredydd Luff. Signed-off-by: David Drysdale <drysdale@google.com> Cc: Meredydd Luff <meredydd@senatehouse.org> Cc: Shuah Khan <shuah.kh@samsung.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rich Felker <dalias@aerifal.cx> Cc: Christoph Hellwig <hch@infradead.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:57:29 +00:00
return do_execveat_common(AT_FDCWD, filename, argv, envp, 0);
}
static int compat_do_execveat(int fd, struct filename *filename,
const compat_uptr_t __user *__argv,
const compat_uptr_t __user *__envp,
int flags)
{
struct user_arg_ptr argv = {
.is_compat = true,
.ptr.compat = __argv,
};
struct user_arg_ptr envp = {
.is_compat = true,
.ptr.compat = __envp,
};
return do_execveat_common(fd, filename, argv, envp, flags);
}
#endif
void set_binfmt(struct linux_binfmt *new)
{
struct mm_struct *mm = current->mm;
if (mm->binfmt)
module_put(mm->binfmt->module);
mm->binfmt = new;
if (new)
__module_get(new->module);
}
EXPORT_SYMBOL(set_binfmt);
/*
* set_dumpable stores three-value SUID_DUMP_* into mm->flags.
*/
void set_dumpable(struct mm_struct *mm, int value)
{
if (WARN_ON((unsigned)value > SUID_DUMP_ROOT))
return;
set_mask_bits(&mm->flags, MMF_DUMPABLE_MASK, value);
}
SYSCALL_DEFINE3(execve,
const char __user *, filename,
const char __user *const __user *, argv,
const char __user *const __user *, envp)
{
return do_execve(getname(filename), argv, envp);
}
syscalls: implement execveat() system call This patchset adds execveat(2) for x86, and is derived from Meredydd Luff's patch from Sept 2012 (https://lkml.org/lkml/2012/9/11/528). The primary aim of adding an execveat syscall is to allow an implementation of fexecve(3) that does not rely on the /proc filesystem, at least for executables (rather than scripts). The current glibc version of fexecve(3) is implemented via /proc, which causes problems in sandboxed or otherwise restricted environments. Given the desire for a /proc-free fexecve() implementation, HPA suggested (https://lkml.org/lkml/2006/7/11/556) that an execveat(2) syscall would be an appropriate generalization. Also, having a new syscall means that it can take a flags argument without back-compatibility concerns. The current implementation just defines the AT_EMPTY_PATH and AT_SYMLINK_NOFOLLOW flags, but other flags could be added in future -- for example, flags for new namespaces (as suggested at https://lkml.org/lkml/2006/7/11/474). Related history: - https://lkml.org/lkml/2006/12/27/123 is an example of someone realizing that fexecve() is likely to fail in a chroot environment. - http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=514043 covered documenting the /proc requirement of fexecve(3) in its manpage, to "prevent other people from wasting their time". - https://bugzilla.redhat.com/show_bug.cgi?id=241609 described a problem where a process that did setuid() could not fexecve() because it no longer had access to /proc/self/fd; this has since been fixed. This patch (of 4): Add a new execveat(2) system call. execveat() is to execve() as openat() is to open(): it takes a file descriptor that refers to a directory, and resolves the filename relative to that. In addition, if the filename is empty and AT_EMPTY_PATH is specified, execveat() executes the file to which the file descriptor refers. This replicates the functionality of fexecve(), which is a system call in other UNIXen, but in Linux glibc it depends on opening "/proc/self/fd/<fd>" (and so relies on /proc being mounted). The filename fed to the executed program as argv[0] (or the name of the script fed to a script interpreter) will be of the form "/dev/fd/<fd>" (for an empty filename) or "/dev/fd/<fd>/<filename>", effectively reflecting how the executable was found. This does however mean that execution of a script in a /proc-less environment won't work; also, script execution via an O_CLOEXEC file descriptor fails (as the file will not be accessible after exec). Based on patches by Meredydd Luff. Signed-off-by: David Drysdale <drysdale@google.com> Cc: Meredydd Luff <meredydd@senatehouse.org> Cc: Shuah Khan <shuah.kh@samsung.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rich Felker <dalias@aerifal.cx> Cc: Christoph Hellwig <hch@infradead.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:57:29 +00:00
SYSCALL_DEFINE5(execveat,
int, fd, const char __user *, filename,
const char __user *const __user *, argv,
const char __user *const __user *, envp,
int, flags)
{
return do_execveat(fd,
getname_uflags(filename, flags),
syscalls: implement execveat() system call This patchset adds execveat(2) for x86, and is derived from Meredydd Luff's patch from Sept 2012 (https://lkml.org/lkml/2012/9/11/528). The primary aim of adding an execveat syscall is to allow an implementation of fexecve(3) that does not rely on the /proc filesystem, at least for executables (rather than scripts). The current glibc version of fexecve(3) is implemented via /proc, which causes problems in sandboxed or otherwise restricted environments. Given the desire for a /proc-free fexecve() implementation, HPA suggested (https://lkml.org/lkml/2006/7/11/556) that an execveat(2) syscall would be an appropriate generalization. Also, having a new syscall means that it can take a flags argument without back-compatibility concerns. The current implementation just defines the AT_EMPTY_PATH and AT_SYMLINK_NOFOLLOW flags, but other flags could be added in future -- for example, flags for new namespaces (as suggested at https://lkml.org/lkml/2006/7/11/474). Related history: - https://lkml.org/lkml/2006/12/27/123 is an example of someone realizing that fexecve() is likely to fail in a chroot environment. - http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=514043 covered documenting the /proc requirement of fexecve(3) in its manpage, to "prevent other people from wasting their time". - https://bugzilla.redhat.com/show_bug.cgi?id=241609 described a problem where a process that did setuid() could not fexecve() because it no longer had access to /proc/self/fd; this has since been fixed. This patch (of 4): Add a new execveat(2) system call. execveat() is to execve() as openat() is to open(): it takes a file descriptor that refers to a directory, and resolves the filename relative to that. In addition, if the filename is empty and AT_EMPTY_PATH is specified, execveat() executes the file to which the file descriptor refers. This replicates the functionality of fexecve(), which is a system call in other UNIXen, but in Linux glibc it depends on opening "/proc/self/fd/<fd>" (and so relies on /proc being mounted). The filename fed to the executed program as argv[0] (or the name of the script fed to a script interpreter) will be of the form "/dev/fd/<fd>" (for an empty filename) or "/dev/fd/<fd>/<filename>", effectively reflecting how the executable was found. This does however mean that execution of a script in a /proc-less environment won't work; also, script execution via an O_CLOEXEC file descriptor fails (as the file will not be accessible after exec). Based on patches by Meredydd Luff. Signed-off-by: David Drysdale <drysdale@google.com> Cc: Meredydd Luff <meredydd@senatehouse.org> Cc: Shuah Khan <shuah.kh@samsung.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rich Felker <dalias@aerifal.cx> Cc: Christoph Hellwig <hch@infradead.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:57:29 +00:00
argv, envp, flags);
}
#ifdef CONFIG_COMPAT
COMPAT_SYSCALL_DEFINE3(execve, const char __user *, filename,
const compat_uptr_t __user *, argv,
const compat_uptr_t __user *, envp)
{
return compat_do_execve(getname(filename), argv, envp);
}
syscalls: implement execveat() system call This patchset adds execveat(2) for x86, and is derived from Meredydd Luff's patch from Sept 2012 (https://lkml.org/lkml/2012/9/11/528). The primary aim of adding an execveat syscall is to allow an implementation of fexecve(3) that does not rely on the /proc filesystem, at least for executables (rather than scripts). The current glibc version of fexecve(3) is implemented via /proc, which causes problems in sandboxed or otherwise restricted environments. Given the desire for a /proc-free fexecve() implementation, HPA suggested (https://lkml.org/lkml/2006/7/11/556) that an execveat(2) syscall would be an appropriate generalization. Also, having a new syscall means that it can take a flags argument without back-compatibility concerns. The current implementation just defines the AT_EMPTY_PATH and AT_SYMLINK_NOFOLLOW flags, but other flags could be added in future -- for example, flags for new namespaces (as suggested at https://lkml.org/lkml/2006/7/11/474). Related history: - https://lkml.org/lkml/2006/12/27/123 is an example of someone realizing that fexecve() is likely to fail in a chroot environment. - http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=514043 covered documenting the /proc requirement of fexecve(3) in its manpage, to "prevent other people from wasting their time". - https://bugzilla.redhat.com/show_bug.cgi?id=241609 described a problem where a process that did setuid() could not fexecve() because it no longer had access to /proc/self/fd; this has since been fixed. This patch (of 4): Add a new execveat(2) system call. execveat() is to execve() as openat() is to open(): it takes a file descriptor that refers to a directory, and resolves the filename relative to that. In addition, if the filename is empty and AT_EMPTY_PATH is specified, execveat() executes the file to which the file descriptor refers. This replicates the functionality of fexecve(), which is a system call in other UNIXen, but in Linux glibc it depends on opening "/proc/self/fd/<fd>" (and so relies on /proc being mounted). The filename fed to the executed program as argv[0] (or the name of the script fed to a script interpreter) will be of the form "/dev/fd/<fd>" (for an empty filename) or "/dev/fd/<fd>/<filename>", effectively reflecting how the executable was found. This does however mean that execution of a script in a /proc-less environment won't work; also, script execution via an O_CLOEXEC file descriptor fails (as the file will not be accessible after exec). Based on patches by Meredydd Luff. Signed-off-by: David Drysdale <drysdale@google.com> Cc: Meredydd Luff <meredydd@senatehouse.org> Cc: Shuah Khan <shuah.kh@samsung.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rich Felker <dalias@aerifal.cx> Cc: Christoph Hellwig <hch@infradead.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:57:29 +00:00
COMPAT_SYSCALL_DEFINE5(execveat, int, fd,
const char __user *, filename,
const compat_uptr_t __user *, argv,
const compat_uptr_t __user *, envp,
int, flags)
{
return compat_do_execveat(fd,
getname_uflags(filename, flags),
syscalls: implement execveat() system call This patchset adds execveat(2) for x86, and is derived from Meredydd Luff's patch from Sept 2012 (https://lkml.org/lkml/2012/9/11/528). The primary aim of adding an execveat syscall is to allow an implementation of fexecve(3) that does not rely on the /proc filesystem, at least for executables (rather than scripts). The current glibc version of fexecve(3) is implemented via /proc, which causes problems in sandboxed or otherwise restricted environments. Given the desire for a /proc-free fexecve() implementation, HPA suggested (https://lkml.org/lkml/2006/7/11/556) that an execveat(2) syscall would be an appropriate generalization. Also, having a new syscall means that it can take a flags argument without back-compatibility concerns. The current implementation just defines the AT_EMPTY_PATH and AT_SYMLINK_NOFOLLOW flags, but other flags could be added in future -- for example, flags for new namespaces (as suggested at https://lkml.org/lkml/2006/7/11/474). Related history: - https://lkml.org/lkml/2006/12/27/123 is an example of someone realizing that fexecve() is likely to fail in a chroot environment. - http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=514043 covered documenting the /proc requirement of fexecve(3) in its manpage, to "prevent other people from wasting their time". - https://bugzilla.redhat.com/show_bug.cgi?id=241609 described a problem where a process that did setuid() could not fexecve() because it no longer had access to /proc/self/fd; this has since been fixed. This patch (of 4): Add a new execveat(2) system call. execveat() is to execve() as openat() is to open(): it takes a file descriptor that refers to a directory, and resolves the filename relative to that. In addition, if the filename is empty and AT_EMPTY_PATH is specified, execveat() executes the file to which the file descriptor refers. This replicates the functionality of fexecve(), which is a system call in other UNIXen, but in Linux glibc it depends on opening "/proc/self/fd/<fd>" (and so relies on /proc being mounted). The filename fed to the executed program as argv[0] (or the name of the script fed to a script interpreter) will be of the form "/dev/fd/<fd>" (for an empty filename) or "/dev/fd/<fd>/<filename>", effectively reflecting how the executable was found. This does however mean that execution of a script in a /proc-less environment won't work; also, script execution via an O_CLOEXEC file descriptor fails (as the file will not be accessible after exec). Based on patches by Meredydd Luff. Signed-off-by: David Drysdale <drysdale@google.com> Cc: Meredydd Luff <meredydd@senatehouse.org> Cc: Shuah Khan <shuah.kh@samsung.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rich Felker <dalias@aerifal.cx> Cc: Christoph Hellwig <hch@infradead.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:57:29 +00:00
argv, envp, flags);
}
#endif