License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
|
|
|
/* SPDX-License-Identifier: GPL-2.0 */
|
2017-01-09 15:55:26 +00:00
|
|
|
/*
|
|
|
|
|
* Shared Memory Communications over RDMA (SMC-R) and RoCE
|
|
|
|
|
*
|
|
|
|
|
* Definitions for the SMC module (socket related)
|
|
|
|
|
*
|
|
|
|
|
* Copyright IBM Corp. 2016
|
|
|
|
|
*
|
|
|
|
|
* Author(s): Ursula Braun <ubraun@linux.vnet.ibm.com>
|
|
|
|
|
*/
|
|
|
|
|
#ifndef _SMC_H
|
|
|
|
|
#define _SMC_H
|
|
|
|
|
|
2018-06-28 17:05:05 +00:00
|
|
|
#define SMC_MAX_PNETID_LEN 16 /* Max. length of PNET id */
|
|
|
|
|
|
2017-01-09 15:55:26 +00:00
|
|
|
struct smc_hashinfo {
|
|
|
|
|
rwlock_t lock;
|
|
|
|
|
struct hlist_head ht;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
int smc_hash_sk(struct sock *sk);
|
|
|
|
|
void smc_unhash_sk(struct sock *sk);
|
net/smc: add base infrastructure for SMC-D and ISM
SMC supports two variants: SMC-R and SMC-D. For data transport, SMC-R
uses RDMA devices, SMC-D uses so-called Internal Shared Memory (ISM)
devices. An ISM device only allows shared memory communication between
SMC instances on the same machine. For example, this allows virtual
machines on the same host to communicate via SMC without RDMA devices.
This patch adds the base infrastructure for SMC-D and ISM devices to
the existing SMC code. It contains the following:
* ISM driver interface:
This interface allows an ISM driver to register ISM devices in SMC. In
the process, the driver provides a set of device ops for each device.
SMC uses these ops to execute SMC specific operations on or transfer
data over the device.
* Core SMC-D link group, connection, and buffer support:
Link groups, SMC connections and SMC buffers (in smc_core) are
extended to support SMC-D.
* SMC type checks:
Some type checks are added to prevent using SMC-R specific code for
SMC-D and vice versa.
To actually use SMC-D, additional changes to pnetid, CLC, CDC, etc. are
required. These are added in follow-up patches.
Signed-off-by: Hans Wippel <hwippel@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Suggested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-28 17:05:07 +00:00
|
|
|
|
|
|
|
|
/* SMCD/ISM device driver interface */
|
|
|
|
|
struct smcd_dmb {
|
|
|
|
|
u64 dmb_tok;
|
|
|
|
|
u64 rgid;
|
|
|
|
|
u32 dmb_len;
|
|
|
|
|
u32 sba_idx;
|
|
|
|
|
u32 vlan_valid;
|
|
|
|
|
u32 vlan_id;
|
|
|
|
|
void *cpu_addr;
|
|
|
|
|
dma_addr_t dma_addr;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
#define ISM_EVENT_DMB 0
|
|
|
|
|
#define ISM_EVENT_GID 1
|
|
|
|
|
#define ISM_EVENT_SWR 2
|
|
|
|
|
|
2020-09-26 10:44:24 +00:00
|
|
|
#define ISM_RESERVED_VLANID 0x1FFF
|
|
|
|
|
|
2019-11-14 12:02:41 +00:00
|
|
|
#define ISM_ERROR 0xFFFF
|
|
|
|
|
|
net/smc: add base infrastructure for SMC-D and ISM
SMC supports two variants: SMC-R and SMC-D. For data transport, SMC-R
uses RDMA devices, SMC-D uses so-called Internal Shared Memory (ISM)
devices. An ISM device only allows shared memory communication between
SMC instances on the same machine. For example, this allows virtual
machines on the same host to communicate via SMC without RDMA devices.
This patch adds the base infrastructure for SMC-D and ISM devices to
the existing SMC code. It contains the following:
* ISM driver interface:
This interface allows an ISM driver to register ISM devices in SMC. In
the process, the driver provides a set of device ops for each device.
SMC uses these ops to execute SMC specific operations on or transfer
data over the device.
* Core SMC-D link group, connection, and buffer support:
Link groups, SMC connections and SMC buffers (in smc_core) are
extended to support SMC-D.
* SMC type checks:
Some type checks are added to prevent using SMC-R specific code for
SMC-D and vice versa.
To actually use SMC-D, additional changes to pnetid, CLC, CDC, etc. are
required. These are added in follow-up patches.
Signed-off-by: Hans Wippel <hwippel@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Suggested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-28 17:05:07 +00:00
|
|
|
struct smcd_event {
|
|
|
|
|
u32 type;
|
|
|
|
|
u32 code;
|
|
|
|
|
u64 tok;
|
|
|
|
|
u64 time;
|
|
|
|
|
u64 info;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
struct smcd_dev;
|
|
|
|
|
|
|
|
|
|
struct smcd_ops {
|
|
|
|
|
int (*query_remote_gid)(struct smcd_dev *dev, u64 rgid, u32 vid_valid,
|
|
|
|
|
u32 vid);
|
|
|
|
|
int (*register_dmb)(struct smcd_dev *dev, struct smcd_dmb *dmb);
|
|
|
|
|
int (*unregister_dmb)(struct smcd_dev *dev, struct smcd_dmb *dmb);
|
|
|
|
|
int (*add_vlan_id)(struct smcd_dev *dev, u64 vlan_id);
|
|
|
|
|
int (*del_vlan_id)(struct smcd_dev *dev, u64 vlan_id);
|
|
|
|
|
int (*set_vlan_required)(struct smcd_dev *dev);
|
|
|
|
|
int (*reset_vlan_required)(struct smcd_dev *dev);
|
|
|
|
|
int (*signal_event)(struct smcd_dev *dev, u64 rgid, u32 trigger_irq,
|
|
|
|
|
u32 event_code, u64 info);
|
|
|
|
|
int (*move_data)(struct smcd_dev *dev, u64 dmb_tok, unsigned int idx,
|
|
|
|
|
bool sf, unsigned int offset, void *data,
|
|
|
|
|
unsigned int size);
|
2020-09-26 10:44:24 +00:00
|
|
|
void (*get_system_eid)(struct smcd_dev *dev, u8 **eid);
|
2020-09-26 10:44:25 +00:00
|
|
|
u16 (*get_chid)(struct smcd_dev *dev);
|
net/smc: add base infrastructure for SMC-D and ISM
SMC supports two variants: SMC-R and SMC-D. For data transport, SMC-R
uses RDMA devices, SMC-D uses so-called Internal Shared Memory (ISM)
devices. An ISM device only allows shared memory communication between
SMC instances on the same machine. For example, this allows virtual
machines on the same host to communicate via SMC without RDMA devices.
This patch adds the base infrastructure for SMC-D and ISM devices to
the existing SMC code. It contains the following:
* ISM driver interface:
This interface allows an ISM driver to register ISM devices in SMC. In
the process, the driver provides a set of device ops for each device.
SMC uses these ops to execute SMC specific operations on or transfer
data over the device.
* Core SMC-D link group, connection, and buffer support:
Link groups, SMC connections and SMC buffers (in smc_core) are
extended to support SMC-D.
* SMC type checks:
Some type checks are added to prevent using SMC-R specific code for
SMC-D and vice versa.
To actually use SMC-D, additional changes to pnetid, CLC, CDC, etc. are
required. These are added in follow-up patches.
Signed-off-by: Hans Wippel <hwippel@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Suggested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-28 17:05:07 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
struct smcd_dev {
|
|
|
|
|
const struct smcd_ops *ops;
|
|
|
|
|
struct device dev;
|
|
|
|
|
void *priv;
|
|
|
|
|
u64 local_gid;
|
|
|
|
|
struct list_head list;
|
|
|
|
|
spinlock_t lock;
|
|
|
|
|
struct smc_connection **conn;
|
|
|
|
|
struct list_head vlan;
|
|
|
|
|
struct workqueue_struct *event_wq;
|
2018-06-28 17:05:08 +00:00
|
|
|
u8 pnetid[SMC_MAX_PNETID_LEN];
|
2019-02-21 12:01:01 +00:00
|
|
|
bool pnetid_by_user;
|
2019-10-09 08:07:43 +00:00
|
|
|
struct list_head lgr_list;
|
2019-10-09 08:07:44 +00:00
|
|
|
spinlock_t lgr_lock;
|
2019-11-14 12:02:43 +00:00
|
|
|
atomic_t lgr_cnt;
|
|
|
|
|
wait_queue_head_t lgrs_deleted;
|
2019-10-09 08:07:46 +00:00
|
|
|
u8 going_away : 1;
|
net/smc: add base infrastructure for SMC-D and ISM
SMC supports two variants: SMC-R and SMC-D. For data transport, SMC-R
uses RDMA devices, SMC-D uses so-called Internal Shared Memory (ISM)
devices. An ISM device only allows shared memory communication between
SMC instances on the same machine. For example, this allows virtual
machines on the same host to communicate via SMC without RDMA devices.
This patch adds the base infrastructure for SMC-D and ISM devices to
the existing SMC code. It contains the following:
* ISM driver interface:
This interface allows an ISM driver to register ISM devices in SMC. In
the process, the driver provides a set of device ops for each device.
SMC uses these ops to execute SMC specific operations on or transfer
data over the device.
* Core SMC-D link group, connection, and buffer support:
Link groups, SMC connections and SMC buffers (in smc_core) are
extended to support SMC-D.
* SMC type checks:
Some type checks are added to prevent using SMC-R specific code for
SMC-D and vice versa.
To actually use SMC-D, additional changes to pnetid, CLC, CDC, etc. are
required. These are added in follow-up patches.
Signed-off-by: Hans Wippel <hwippel@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Suggested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-28 17:05:07 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
struct smcd_dev *smcd_alloc_dev(struct device *parent, const char *name,
|
|
|
|
|
const struct smcd_ops *ops, int max_dmbs);
|
|
|
|
|
int smcd_register_dev(struct smcd_dev *smcd);
|
|
|
|
|
void smcd_unregister_dev(struct smcd_dev *smcd);
|
|
|
|
|
void smcd_free_dev(struct smcd_dev *smcd);
|
|
|
|
|
void smcd_handle_event(struct smcd_dev *dev, struct smcd_event *event);
|
|
|
|
|
void smcd_handle_irq(struct smcd_dev *dev, unsigned int bit);
|
2017-01-09 15:55:26 +00:00
|
|
|
#endif /* _SMC_H */
|