linux-stable/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c

2643 lines
70 KiB
C
Raw Normal View History

/*
* DesignWare High-Definition Multimedia Interface (HDMI) driver
*
* Copyright (C) 2013-2015 Mentor Graphics Inc.
* Copyright (C) 2011-2013 Freescale Semiconductor, Inc.
* Copyright (C) 2010, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*/
#include <linux/module.h>
#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/hdmi.h>
#include <linux/mutex.h>
#include <linux/of_device.h>
#include <linux/regmap.h>
#include <linux/spinlock.h>
#include <drm/drm_of.h>
#include <drm/drmP.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_edid.h>
#include <drm/drm_encoder_slave.h>
#include <drm/bridge/dw_hdmi.h>
#include <uapi/linux/media-bus-format.h>
#include <uapi/linux/videodev2.h>
#include "dw-hdmi.h"
#include "dw-hdmi-audio.h"
#include "dw-hdmi-cec.h"
#include <media/cec-notifier.h>
#define DDC_SEGMENT_ADDR 0x30
#define HDMI_EDID_LEN 512
enum hdmi_datamap {
RGB444_8B = 0x01,
RGB444_10B = 0x03,
RGB444_12B = 0x05,
RGB444_16B = 0x07,
YCbCr444_8B = 0x09,
YCbCr444_10B = 0x0B,
YCbCr444_12B = 0x0D,
YCbCr444_16B = 0x0F,
YCbCr422_8B = 0x16,
YCbCr422_10B = 0x14,
YCbCr422_12B = 0x12,
};
static const u16 csc_coeff_default[3][4] = {
{ 0x2000, 0x0000, 0x0000, 0x0000 },
{ 0x0000, 0x2000, 0x0000, 0x0000 },
{ 0x0000, 0x0000, 0x2000, 0x0000 }
};
static const u16 csc_coeff_rgb_out_eitu601[3][4] = {
{ 0x2000, 0x6926, 0x74fd, 0x010e },
{ 0x2000, 0x2cdd, 0x0000, 0x7e9a },
{ 0x2000, 0x0000, 0x38b4, 0x7e3b }
};
static const u16 csc_coeff_rgb_out_eitu709[3][4] = {
{ 0x2000, 0x7106, 0x7a02, 0x00a7 },
{ 0x2000, 0x3264, 0x0000, 0x7e6d },
{ 0x2000, 0x0000, 0x3b61, 0x7e25 }
};
static const u16 csc_coeff_rgb_in_eitu601[3][4] = {
{ 0x2591, 0x1322, 0x074b, 0x0000 },
{ 0x6535, 0x2000, 0x7acc, 0x0200 },
{ 0x6acd, 0x7534, 0x2000, 0x0200 }
};
static const u16 csc_coeff_rgb_in_eitu709[3][4] = {
{ 0x2dc5, 0x0d9b, 0x049e, 0x0000 },
{ 0x62f0, 0x2000, 0x7d11, 0x0200 },
{ 0x6756, 0x78ab, 0x2000, 0x0200 }
};
struct hdmi_vmode {
bool mdataenablepolarity;
unsigned int mpixelclock;
unsigned int mpixelrepetitioninput;
unsigned int mpixelrepetitionoutput;
};
struct hdmi_data_info {
unsigned int enc_in_bus_format;
unsigned int enc_out_bus_format;
unsigned int enc_in_encoding;
unsigned int enc_out_encoding;
unsigned int pix_repet_factor;
unsigned int hdcp_enable;
struct hdmi_vmode video_mode;
};
struct dw_hdmi_i2c {
struct i2c_adapter adap;
struct mutex lock; /* used to serialize data transfers */
struct completion cmp;
u8 stat;
u8 slave_reg;
bool is_regaddr;
bool is_segment;
};
struct dw_hdmi_phy_data {
enum dw_hdmi_phy_type type;
const char *name;
unsigned int gen;
bool has_svsret;
int (*configure)(struct dw_hdmi *hdmi,
const struct dw_hdmi_plat_data *pdata,
unsigned long mpixelclock);
};
struct dw_hdmi {
struct drm_connector connector;
struct drm_bridge bridge;
unsigned int version;
struct platform_device *audio;
struct platform_device *cec;
struct device *dev;
struct clk *isfr_clk;
struct clk *iahb_clk;
struct clk *cec_clk;
struct dw_hdmi_i2c *i2c;
struct hdmi_data_info hdmi_data;
const struct dw_hdmi_plat_data *plat_data;
int vic;
u8 edid[HDMI_EDID_LEN];
struct {
const struct dw_hdmi_phy_ops *ops;
const char *name;
void *data;
bool enabled;
} phy;
struct drm_display_mode previous_mode;
struct i2c_adapter *ddc;
void __iomem *regs;
bool sink_is_hdmi;
bool sink_has_audio;
struct mutex mutex; /* for state below and previous_mode */
enum drm_connector_force force; /* mutex-protected force state */
bool disabled; /* DRM has disabled our bridge */
bool bridge_is_on; /* indicates the bridge is on */
drm: bridge/dw_hdmi: improve HDMI enable/disable handling HDMI sinks are permitted to de-assert and re-assert the HPD signal to indicate that their EDID has been updated, which may not involve a change of video information. An example of where such a situation can arise is when an AV receiver is connected between the source and the display device. Events which can cause the HPD to be deasserted include: * turning on or switching to standby the AV receiver. * turning on or switching to standby the display device. Each of these can change the entire EDID data, or just a part of the EDID data - it's up to the connected HDMI sink to do what they desire here. For example - with the AV receiver and display device both in standby, a source connected to the AV receiver may provide its own EDID to the source. - turning on the display device causes the display device's EDID to be made available in an unmodified form to the source. - subsequently turning on the AV receiver then provides a modified version of the display device's EDID. Moreover, HPD doesn't tell us whether something is actually listening on the HDMI TDMS signals. The phy gives us a set of RXSENSE indications which tell us whether there is a sink connected to the TMDS signals. Currently, we use the HPD signal to enable or disable the HDMI block, which is questionable when HPD is used in this manner. Using the RXSENSE would be more appropriate, but there is some bad behaviour which needs to be coped with. The iMX6 implementation lets the TMDS signals float when the phy is "powered down", which cause spurious interrupts. Rather than just using RXSENSE, use RXSENSE and HPD becoming both active to signal the presence of a device, but loss of RXSENSE to indicate that the device has been unplugged. The side effect of this change is that a sink deasserting the HPD signal to cause a re-read of the EDID data will not cause the bridge to immediately disable the video signal. Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-06-05 12:46:22 +00:00
bool rxsense; /* rxsense state */
u8 phy_mask; /* desired phy int mask settings */
u8 mc_clkdis; /* clock disable register */
spinlock_t audio_lock;
struct mutex audio_mutex;
unsigned int sample_rate;
unsigned int audio_cts;
unsigned int audio_n;
bool audio_enable;
unsigned int reg_shift;
struct regmap *regm;
void (*enable_audio)(struct dw_hdmi *hdmi);
void (*disable_audio)(struct dw_hdmi *hdmi);
struct cec_notifier *cec_notifier;
};
drm: bridge/dw_hdmi: improve HDMI enable/disable handling HDMI sinks are permitted to de-assert and re-assert the HPD signal to indicate that their EDID has been updated, which may not involve a change of video information. An example of where such a situation can arise is when an AV receiver is connected between the source and the display device. Events which can cause the HPD to be deasserted include: * turning on or switching to standby the AV receiver. * turning on or switching to standby the display device. Each of these can change the entire EDID data, or just a part of the EDID data - it's up to the connected HDMI sink to do what they desire here. For example - with the AV receiver and display device both in standby, a source connected to the AV receiver may provide its own EDID to the source. - turning on the display device causes the display device's EDID to be made available in an unmodified form to the source. - subsequently turning on the AV receiver then provides a modified version of the display device's EDID. Moreover, HPD doesn't tell us whether something is actually listening on the HDMI TDMS signals. The phy gives us a set of RXSENSE indications which tell us whether there is a sink connected to the TMDS signals. Currently, we use the HPD signal to enable or disable the HDMI block, which is questionable when HPD is used in this manner. Using the RXSENSE would be more appropriate, but there is some bad behaviour which needs to be coped with. The iMX6 implementation lets the TMDS signals float when the phy is "powered down", which cause spurious interrupts. Rather than just using RXSENSE, use RXSENSE and HPD becoming both active to signal the presence of a device, but loss of RXSENSE to indicate that the device has been unplugged. The side effect of this change is that a sink deasserting the HPD signal to cause a re-read of the EDID data will not cause the bridge to immediately disable the video signal. Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-06-05 12:46:22 +00:00
#define HDMI_IH_PHY_STAT0_RX_SENSE \
(HDMI_IH_PHY_STAT0_RX_SENSE0 | HDMI_IH_PHY_STAT0_RX_SENSE1 | \
HDMI_IH_PHY_STAT0_RX_SENSE2 | HDMI_IH_PHY_STAT0_RX_SENSE3)
#define HDMI_PHY_RX_SENSE \
(HDMI_PHY_RX_SENSE0 | HDMI_PHY_RX_SENSE1 | \
HDMI_PHY_RX_SENSE2 | HDMI_PHY_RX_SENSE3)
static inline void hdmi_writeb(struct dw_hdmi *hdmi, u8 val, int offset)
{
regmap_write(hdmi->regm, offset << hdmi->reg_shift, val);
}
static inline u8 hdmi_readb(struct dw_hdmi *hdmi, int offset)
{
unsigned int val = 0;
regmap_read(hdmi->regm, offset << hdmi->reg_shift, &val);
return val;
}
static void hdmi_modb(struct dw_hdmi *hdmi, u8 data, u8 mask, unsigned reg)
{
regmap_update_bits(hdmi->regm, reg << hdmi->reg_shift, mask, data);
}
static void hdmi_mask_writeb(struct dw_hdmi *hdmi, u8 data, unsigned int reg,
u8 shift, u8 mask)
{
hdmi_modb(hdmi, data << shift, mask, reg);
}
static void dw_hdmi_i2c_init(struct dw_hdmi *hdmi)
{
/* Software reset */
hdmi_writeb(hdmi, 0x00, HDMI_I2CM_SOFTRSTZ);
/* Set Standard Mode speed (determined to be 100KHz on iMX6) */
hdmi_writeb(hdmi, 0x00, HDMI_I2CM_DIV);
/* Set done, not acknowledged and arbitration interrupt polarities */
hdmi_writeb(hdmi, HDMI_I2CM_INT_DONE_POL, HDMI_I2CM_INT);
hdmi_writeb(hdmi, HDMI_I2CM_CTLINT_NAC_POL | HDMI_I2CM_CTLINT_ARB_POL,
HDMI_I2CM_CTLINT);
/* Clear DONE and ERROR interrupts */
hdmi_writeb(hdmi, HDMI_IH_I2CM_STAT0_ERROR | HDMI_IH_I2CM_STAT0_DONE,
HDMI_IH_I2CM_STAT0);
/* Mute DONE and ERROR interrupts */
hdmi_writeb(hdmi, HDMI_IH_I2CM_STAT0_ERROR | HDMI_IH_I2CM_STAT0_DONE,
HDMI_IH_MUTE_I2CM_STAT0);
}
static int dw_hdmi_i2c_read(struct dw_hdmi *hdmi,
unsigned char *buf, unsigned int length)
{
struct dw_hdmi_i2c *i2c = hdmi->i2c;
int stat;
if (!i2c->is_regaddr) {
dev_dbg(hdmi->dev, "set read register address to 0\n");
i2c->slave_reg = 0x00;
i2c->is_regaddr = true;
}
while (length--) {
reinit_completion(&i2c->cmp);
hdmi_writeb(hdmi, i2c->slave_reg++, HDMI_I2CM_ADDRESS);
if (i2c->is_segment)
hdmi_writeb(hdmi, HDMI_I2CM_OPERATION_READ_EXT,
HDMI_I2CM_OPERATION);
else
hdmi_writeb(hdmi, HDMI_I2CM_OPERATION_READ,
HDMI_I2CM_OPERATION);
stat = wait_for_completion_timeout(&i2c->cmp, HZ / 10);
if (!stat)
return -EAGAIN;
/* Check for error condition on the bus */
if (i2c->stat & HDMI_IH_I2CM_STAT0_ERROR)
return -EIO;
*buf++ = hdmi_readb(hdmi, HDMI_I2CM_DATAI);
}
i2c->is_segment = false;
return 0;
}
static int dw_hdmi_i2c_write(struct dw_hdmi *hdmi,
unsigned char *buf, unsigned int length)
{
struct dw_hdmi_i2c *i2c = hdmi->i2c;
int stat;
if (!i2c->is_regaddr) {
/* Use the first write byte as register address */
i2c->slave_reg = buf[0];
length--;
buf++;
i2c->is_regaddr = true;
}
while (length--) {
reinit_completion(&i2c->cmp);
hdmi_writeb(hdmi, *buf++, HDMI_I2CM_DATAO);
hdmi_writeb(hdmi, i2c->slave_reg++, HDMI_I2CM_ADDRESS);
hdmi_writeb(hdmi, HDMI_I2CM_OPERATION_WRITE,
HDMI_I2CM_OPERATION);
stat = wait_for_completion_timeout(&i2c->cmp, HZ / 10);
if (!stat)
return -EAGAIN;
/* Check for error condition on the bus */
if (i2c->stat & HDMI_IH_I2CM_STAT0_ERROR)
return -EIO;
}
return 0;
}
static int dw_hdmi_i2c_xfer(struct i2c_adapter *adap,
struct i2c_msg *msgs, int num)
{
struct dw_hdmi *hdmi = i2c_get_adapdata(adap);
struct dw_hdmi_i2c *i2c = hdmi->i2c;
u8 addr = msgs[0].addr;
int i, ret = 0;
dev_dbg(hdmi->dev, "xfer: num: %d, addr: %#x\n", num, addr);
for (i = 0; i < num; i++) {
if (msgs[i].len == 0) {
dev_dbg(hdmi->dev,
"unsupported transfer %d/%d, no data\n",
i + 1, num);
return -EOPNOTSUPP;
}
}
mutex_lock(&i2c->lock);
/* Unmute DONE and ERROR interrupts */
hdmi_writeb(hdmi, 0x00, HDMI_IH_MUTE_I2CM_STAT0);
/* Set slave device address taken from the first I2C message */
hdmi_writeb(hdmi, addr, HDMI_I2CM_SLAVE);
/* Set slave device register address on transfer */
i2c->is_regaddr = false;
/* Set segment pointer for I2C extended read mode operation */
i2c->is_segment = false;
for (i = 0; i < num; i++) {
dev_dbg(hdmi->dev, "xfer: num: %d/%d, len: %d, flags: %#x\n",
i + 1, num, msgs[i].len, msgs[i].flags);
if (msgs[i].addr == DDC_SEGMENT_ADDR && msgs[i].len == 1) {
i2c->is_segment = true;
hdmi_writeb(hdmi, DDC_SEGMENT_ADDR, HDMI_I2CM_SEGADDR);
hdmi_writeb(hdmi, *msgs[i].buf, HDMI_I2CM_SEGPTR);
} else {
if (msgs[i].flags & I2C_M_RD)
ret = dw_hdmi_i2c_read(hdmi, msgs[i].buf,
msgs[i].len);
else
ret = dw_hdmi_i2c_write(hdmi, msgs[i].buf,
msgs[i].len);
}
if (ret < 0)
break;
}
if (!ret)
ret = num;
/* Mute DONE and ERROR interrupts */
hdmi_writeb(hdmi, HDMI_IH_I2CM_STAT0_ERROR | HDMI_IH_I2CM_STAT0_DONE,
HDMI_IH_MUTE_I2CM_STAT0);
mutex_unlock(&i2c->lock);
return ret;
}
static u32 dw_hdmi_i2c_func(struct i2c_adapter *adapter)
{
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
}
static const struct i2c_algorithm dw_hdmi_algorithm = {
.master_xfer = dw_hdmi_i2c_xfer,
.functionality = dw_hdmi_i2c_func,
};
static struct i2c_adapter *dw_hdmi_i2c_adapter(struct dw_hdmi *hdmi)
{
struct i2c_adapter *adap;
struct dw_hdmi_i2c *i2c;
int ret;
i2c = devm_kzalloc(hdmi->dev, sizeof(*i2c), GFP_KERNEL);
if (!i2c)
return ERR_PTR(-ENOMEM);
mutex_init(&i2c->lock);
init_completion(&i2c->cmp);
adap = &i2c->adap;
adap->class = I2C_CLASS_DDC;
adap->owner = THIS_MODULE;
adap->dev.parent = hdmi->dev;
adap->algo = &dw_hdmi_algorithm;
strlcpy(adap->name, "DesignWare HDMI", sizeof(adap->name));
i2c_set_adapdata(adap, hdmi);
ret = i2c_add_adapter(adap);
if (ret) {
dev_warn(hdmi->dev, "cannot add %s I2C adapter\n", adap->name);
devm_kfree(hdmi->dev, i2c);
return ERR_PTR(ret);
}
hdmi->i2c = i2c;
dev_info(hdmi->dev, "registered %s I2C bus driver\n", adap->name);
return adap;
}
static void hdmi_set_cts_n(struct dw_hdmi *hdmi, unsigned int cts,
unsigned int n)
{
/* Must be set/cleared first */
hdmi_modb(hdmi, 0, HDMI_AUD_CTS3_CTS_MANUAL, HDMI_AUD_CTS3);
/* nshift factor = 0 */
hdmi_modb(hdmi, 0, HDMI_AUD_CTS3_N_SHIFT_MASK, HDMI_AUD_CTS3);
hdmi_writeb(hdmi, ((cts >> 16) & HDMI_AUD_CTS3_AUDCTS19_16_MASK) |
HDMI_AUD_CTS3_CTS_MANUAL, HDMI_AUD_CTS3);
hdmi_writeb(hdmi, (cts >> 8) & 0xff, HDMI_AUD_CTS2);
hdmi_writeb(hdmi, cts & 0xff, HDMI_AUD_CTS1);
hdmi_writeb(hdmi, (n >> 16) & 0x0f, HDMI_AUD_N3);
hdmi_writeb(hdmi, (n >> 8) & 0xff, HDMI_AUD_N2);
hdmi_writeb(hdmi, n & 0xff, HDMI_AUD_N1);
}
static unsigned int hdmi_compute_n(unsigned int freq, unsigned long pixel_clk)
{
unsigned int n = (128 * freq) / 1000;
unsigned int mult = 1;
while (freq > 48000) {
mult *= 2;
freq /= 2;
}
switch (freq) {
case 32000:
if (pixel_clk == 25175000)
n = 4576;
else if (pixel_clk == 27027000)
n = 4096;
else if (pixel_clk == 74176000 || pixel_clk == 148352000)
n = 11648;
else
n = 4096;
n *= mult;
break;
case 44100:
if (pixel_clk == 25175000)
n = 7007;
else if (pixel_clk == 74176000)
n = 17836;
else if (pixel_clk == 148352000)
n = 8918;
else
n = 6272;
n *= mult;
break;
case 48000:
if (pixel_clk == 25175000)
n = 6864;
else if (pixel_clk == 27027000)
n = 6144;
else if (pixel_clk == 74176000)
n = 11648;
else if (pixel_clk == 148352000)
n = 5824;
else
n = 6144;
n *= mult;
break;
default:
break;
}
return n;
}
static void hdmi_set_clk_regenerator(struct dw_hdmi *hdmi,
unsigned long pixel_clk, unsigned int sample_rate)
{
unsigned long ftdms = pixel_clk;
unsigned int n, cts;
u64 tmp;
n = hdmi_compute_n(sample_rate, pixel_clk);
/*
* Compute the CTS value from the N value. Note that CTS and N
* can be up to 20 bits in total, so we need 64-bit math. Also
* note that our TDMS clock is not fully accurate; it is accurate
* to kHz. This can introduce an unnecessary remainder in the
* calculation below, so we don't try to warn about that.
*/
tmp = (u64)ftdms * n;
do_div(tmp, 128 * sample_rate);
cts = tmp;
dev_dbg(hdmi->dev, "%s: fs=%uHz ftdms=%lu.%03luMHz N=%d cts=%d\n",
__func__, sample_rate, ftdms / 1000000, (ftdms / 1000) % 1000,
n, cts);
spin_lock_irq(&hdmi->audio_lock);
hdmi->audio_n = n;
hdmi->audio_cts = cts;
hdmi_set_cts_n(hdmi, cts, hdmi->audio_enable ? n : 0);
spin_unlock_irq(&hdmi->audio_lock);
}
static void hdmi_init_clk_regenerator(struct dw_hdmi *hdmi)
{
mutex_lock(&hdmi->audio_mutex);
hdmi_set_clk_regenerator(hdmi, 74250000, hdmi->sample_rate);
mutex_unlock(&hdmi->audio_mutex);
}
static void hdmi_clk_regenerator_update_pixel_clock(struct dw_hdmi *hdmi)
{
mutex_lock(&hdmi->audio_mutex);
hdmi_set_clk_regenerator(hdmi, hdmi->hdmi_data.video_mode.mpixelclock,
hdmi->sample_rate);
mutex_unlock(&hdmi->audio_mutex);
}
void dw_hdmi_set_sample_rate(struct dw_hdmi *hdmi, unsigned int rate)
{
mutex_lock(&hdmi->audio_mutex);
hdmi->sample_rate = rate;
hdmi_set_clk_regenerator(hdmi, hdmi->hdmi_data.video_mode.mpixelclock,
hdmi->sample_rate);
mutex_unlock(&hdmi->audio_mutex);
}
EXPORT_SYMBOL_GPL(dw_hdmi_set_sample_rate);
static void hdmi_enable_audio_clk(struct dw_hdmi *hdmi, bool enable)
{
if (enable)
hdmi->mc_clkdis &= ~HDMI_MC_CLKDIS_AUDCLK_DISABLE;
else
hdmi->mc_clkdis |= HDMI_MC_CLKDIS_AUDCLK_DISABLE;
hdmi_writeb(hdmi, hdmi->mc_clkdis, HDMI_MC_CLKDIS);
}
static void dw_hdmi_ahb_audio_enable(struct dw_hdmi *hdmi)
{
hdmi_set_cts_n(hdmi, hdmi->audio_cts, hdmi->audio_n);
}
static void dw_hdmi_ahb_audio_disable(struct dw_hdmi *hdmi)
{
hdmi_set_cts_n(hdmi, hdmi->audio_cts, 0);
}
static void dw_hdmi_i2s_audio_enable(struct dw_hdmi *hdmi)
{
hdmi_set_cts_n(hdmi, hdmi->audio_cts, hdmi->audio_n);
hdmi_enable_audio_clk(hdmi, true);
}
static void dw_hdmi_i2s_audio_disable(struct dw_hdmi *hdmi)
{
hdmi_enable_audio_clk(hdmi, false);
}
void dw_hdmi_audio_enable(struct dw_hdmi *hdmi)
{
unsigned long flags;
spin_lock_irqsave(&hdmi->audio_lock, flags);
hdmi->audio_enable = true;
if (hdmi->enable_audio)
hdmi->enable_audio(hdmi);
spin_unlock_irqrestore(&hdmi->audio_lock, flags);
}
EXPORT_SYMBOL_GPL(dw_hdmi_audio_enable);
void dw_hdmi_audio_disable(struct dw_hdmi *hdmi)
{
unsigned long flags;
spin_lock_irqsave(&hdmi->audio_lock, flags);
hdmi->audio_enable = false;
if (hdmi->disable_audio)
hdmi->disable_audio(hdmi);
spin_unlock_irqrestore(&hdmi->audio_lock, flags);
}
EXPORT_SYMBOL_GPL(dw_hdmi_audio_disable);
static bool hdmi_bus_fmt_is_rgb(unsigned int bus_format)
{
switch (bus_format) {
case MEDIA_BUS_FMT_RGB888_1X24:
case MEDIA_BUS_FMT_RGB101010_1X30:
case MEDIA_BUS_FMT_RGB121212_1X36:
case MEDIA_BUS_FMT_RGB161616_1X48:
return true;
default:
return false;
}
}
static bool hdmi_bus_fmt_is_yuv444(unsigned int bus_format)
{
switch (bus_format) {
case MEDIA_BUS_FMT_YUV8_1X24:
case MEDIA_BUS_FMT_YUV10_1X30:
case MEDIA_BUS_FMT_YUV12_1X36:
case MEDIA_BUS_FMT_YUV16_1X48:
return true;
default:
return false;
}
}
static bool hdmi_bus_fmt_is_yuv422(unsigned int bus_format)
{
switch (bus_format) {
case MEDIA_BUS_FMT_UYVY8_1X16:
case MEDIA_BUS_FMT_UYVY10_1X20:
case MEDIA_BUS_FMT_UYVY12_1X24:
return true;
default:
return false;
}
}
static int hdmi_bus_fmt_color_depth(unsigned int bus_format)
{
switch (bus_format) {
case MEDIA_BUS_FMT_RGB888_1X24:
case MEDIA_BUS_FMT_YUV8_1X24:
case MEDIA_BUS_FMT_UYVY8_1X16:
case MEDIA_BUS_FMT_UYYVYY8_0_5X24:
return 8;
case MEDIA_BUS_FMT_RGB101010_1X30:
case MEDIA_BUS_FMT_YUV10_1X30:
case MEDIA_BUS_FMT_UYVY10_1X20:
case MEDIA_BUS_FMT_UYYVYY10_0_5X30:
return 10;
case MEDIA_BUS_FMT_RGB121212_1X36:
case MEDIA_BUS_FMT_YUV12_1X36:
case MEDIA_BUS_FMT_UYVY12_1X24:
case MEDIA_BUS_FMT_UYYVYY12_0_5X36:
return 12;
case MEDIA_BUS_FMT_RGB161616_1X48:
case MEDIA_BUS_FMT_YUV16_1X48:
case MEDIA_BUS_FMT_UYYVYY16_0_5X48:
return 16;
default:
return 0;
}
}
/*
* this submodule is responsible for the video data synchronization.
* for example, for RGB 4:4:4 input, the data map is defined as
* pin{47~40} <==> R[7:0]
* pin{31~24} <==> G[7:0]
* pin{15~8} <==> B[7:0]
*/
static void hdmi_video_sample(struct dw_hdmi *hdmi)
{
int color_format = 0;
u8 val;
switch (hdmi->hdmi_data.enc_in_bus_format) {
case MEDIA_BUS_FMT_RGB888_1X24:
color_format = 0x01;
break;
case MEDIA_BUS_FMT_RGB101010_1X30:
color_format = 0x03;
break;
case MEDIA_BUS_FMT_RGB121212_1X36:
color_format = 0x05;
break;
case MEDIA_BUS_FMT_RGB161616_1X48:
color_format = 0x07;
break;
case MEDIA_BUS_FMT_YUV8_1X24:
case MEDIA_BUS_FMT_UYYVYY8_0_5X24:
color_format = 0x09;
break;
case MEDIA_BUS_FMT_YUV10_1X30:
case MEDIA_BUS_FMT_UYYVYY10_0_5X30:
color_format = 0x0B;
break;
case MEDIA_BUS_FMT_YUV12_1X36:
case MEDIA_BUS_FMT_UYYVYY12_0_5X36:
color_format = 0x0D;
break;
case MEDIA_BUS_FMT_YUV16_1X48:
case MEDIA_BUS_FMT_UYYVYY16_0_5X48:
color_format = 0x0F;
break;
case MEDIA_BUS_FMT_UYVY8_1X16:
color_format = 0x16;
break;
case MEDIA_BUS_FMT_UYVY10_1X20:
color_format = 0x14;
break;
case MEDIA_BUS_FMT_UYVY12_1X24:
color_format = 0x12;
break;
default:
return;
}
val = HDMI_TX_INVID0_INTERNAL_DE_GENERATOR_DISABLE |
((color_format << HDMI_TX_INVID0_VIDEO_MAPPING_OFFSET) &
HDMI_TX_INVID0_VIDEO_MAPPING_MASK);
hdmi_writeb(hdmi, val, HDMI_TX_INVID0);
/* Enable TX stuffing: When DE is inactive, fix the output data to 0 */
val = HDMI_TX_INSTUFFING_BDBDATA_STUFFING_ENABLE |
HDMI_TX_INSTUFFING_RCRDATA_STUFFING_ENABLE |
HDMI_TX_INSTUFFING_GYDATA_STUFFING_ENABLE;
hdmi_writeb(hdmi, val, HDMI_TX_INSTUFFING);
hdmi_writeb(hdmi, 0x0, HDMI_TX_GYDATA0);
hdmi_writeb(hdmi, 0x0, HDMI_TX_GYDATA1);
hdmi_writeb(hdmi, 0x0, HDMI_TX_RCRDATA0);
hdmi_writeb(hdmi, 0x0, HDMI_TX_RCRDATA1);
hdmi_writeb(hdmi, 0x0, HDMI_TX_BCBDATA0);
hdmi_writeb(hdmi, 0x0, HDMI_TX_BCBDATA1);
}
static int is_color_space_conversion(struct dw_hdmi *hdmi)
{
return hdmi->hdmi_data.enc_in_bus_format != hdmi->hdmi_data.enc_out_bus_format;
}
static int is_color_space_decimation(struct dw_hdmi *hdmi)
{
if (!hdmi_bus_fmt_is_yuv422(hdmi->hdmi_data.enc_out_bus_format))
return 0;
if (hdmi_bus_fmt_is_rgb(hdmi->hdmi_data.enc_in_bus_format) ||
hdmi_bus_fmt_is_yuv444(hdmi->hdmi_data.enc_in_bus_format))
return 1;
return 0;
}
static int is_color_space_interpolation(struct dw_hdmi *hdmi)
{
if (!hdmi_bus_fmt_is_yuv422(hdmi->hdmi_data.enc_in_bus_format))
return 0;
if (hdmi_bus_fmt_is_rgb(hdmi->hdmi_data.enc_out_bus_format) ||
hdmi_bus_fmt_is_yuv444(hdmi->hdmi_data.enc_out_bus_format))
return 1;
return 0;
}
static void dw_hdmi_update_csc_coeffs(struct dw_hdmi *hdmi)
{
const u16 (*csc_coeff)[3][4] = &csc_coeff_default;
unsigned i;
u32 csc_scale = 1;
if (is_color_space_conversion(hdmi)) {
if (hdmi_bus_fmt_is_rgb(hdmi->hdmi_data.enc_out_bus_format)) {
if (hdmi->hdmi_data.enc_out_encoding ==
V4L2_YCBCR_ENC_601)
csc_coeff = &csc_coeff_rgb_out_eitu601;
else
csc_coeff = &csc_coeff_rgb_out_eitu709;
} else if (hdmi_bus_fmt_is_rgb(
hdmi->hdmi_data.enc_in_bus_format)) {
if (hdmi->hdmi_data.enc_out_encoding ==
V4L2_YCBCR_ENC_601)
csc_coeff = &csc_coeff_rgb_in_eitu601;
else
csc_coeff = &csc_coeff_rgb_in_eitu709;
csc_scale = 0;
}
}
/* The CSC registers are sequential, alternating MSB then LSB */
for (i = 0; i < ARRAY_SIZE(csc_coeff_default[0]); i++) {
u16 coeff_a = (*csc_coeff)[0][i];
u16 coeff_b = (*csc_coeff)[1][i];
u16 coeff_c = (*csc_coeff)[2][i];
hdmi_writeb(hdmi, coeff_a & 0xff, HDMI_CSC_COEF_A1_LSB + i * 2);
hdmi_writeb(hdmi, coeff_a >> 8, HDMI_CSC_COEF_A1_MSB + i * 2);
hdmi_writeb(hdmi, coeff_b & 0xff, HDMI_CSC_COEF_B1_LSB + i * 2);
hdmi_writeb(hdmi, coeff_b >> 8, HDMI_CSC_COEF_B1_MSB + i * 2);
hdmi_writeb(hdmi, coeff_c & 0xff, HDMI_CSC_COEF_C1_LSB + i * 2);
hdmi_writeb(hdmi, coeff_c >> 8, HDMI_CSC_COEF_C1_MSB + i * 2);
}
hdmi_modb(hdmi, csc_scale, HDMI_CSC_SCALE_CSCSCALE_MASK,
HDMI_CSC_SCALE);
}
static void hdmi_video_csc(struct dw_hdmi *hdmi)
{
int color_depth = 0;
int interpolation = HDMI_CSC_CFG_INTMODE_DISABLE;
int decimation = 0;
/* YCC422 interpolation to 444 mode */
if (is_color_space_interpolation(hdmi))
interpolation = HDMI_CSC_CFG_INTMODE_CHROMA_INT_FORMULA1;
else if (is_color_space_decimation(hdmi))
decimation = HDMI_CSC_CFG_DECMODE_CHROMA_INT_FORMULA3;
switch (hdmi_bus_fmt_color_depth(hdmi->hdmi_data.enc_out_bus_format)) {
case 8:
color_depth = HDMI_CSC_SCALE_CSC_COLORDE_PTH_24BPP;
break;
case 10:
color_depth = HDMI_CSC_SCALE_CSC_COLORDE_PTH_30BPP;
break;
case 12:
color_depth = HDMI_CSC_SCALE_CSC_COLORDE_PTH_36BPP;
break;
case 16:
color_depth = HDMI_CSC_SCALE_CSC_COLORDE_PTH_48BPP;
break;
default:
return;
}
/* Configure the CSC registers */
hdmi_writeb(hdmi, interpolation | decimation, HDMI_CSC_CFG);
hdmi_modb(hdmi, color_depth, HDMI_CSC_SCALE_CSC_COLORDE_PTH_MASK,
HDMI_CSC_SCALE);
dw_hdmi_update_csc_coeffs(hdmi);
}
/*
* HDMI video packetizer is used to packetize the data.
* for example, if input is YCC422 mode or repeater is used,
* data should be repacked this module can be bypassed.
*/
static void hdmi_video_packetize(struct dw_hdmi *hdmi)
{
unsigned int color_depth = 0;
unsigned int remap_size = HDMI_VP_REMAP_YCC422_16bit;
unsigned int output_select = HDMI_VP_CONF_OUTPUT_SELECTOR_PP;
struct hdmi_data_info *hdmi_data = &hdmi->hdmi_data;
u8 val, vp_conf;
if (hdmi_bus_fmt_is_rgb(hdmi->hdmi_data.enc_out_bus_format) ||
hdmi_bus_fmt_is_yuv444(hdmi->hdmi_data.enc_out_bus_format)) {
switch (hdmi_bus_fmt_color_depth(
hdmi->hdmi_data.enc_out_bus_format)) {
case 8:
color_depth = 4;
output_select = HDMI_VP_CONF_OUTPUT_SELECTOR_BYPASS;
break;
case 10:
color_depth = 5;
break;
case 12:
color_depth = 6;
break;
case 16:
color_depth = 7;
break;
default:
output_select = HDMI_VP_CONF_OUTPUT_SELECTOR_BYPASS;
}
} else if (hdmi_bus_fmt_is_yuv422(hdmi->hdmi_data.enc_out_bus_format)) {
switch (hdmi_bus_fmt_color_depth(
hdmi->hdmi_data.enc_out_bus_format)) {
case 0:
case 8:
remap_size = HDMI_VP_REMAP_YCC422_16bit;
break;
case 10:
remap_size = HDMI_VP_REMAP_YCC422_20bit;
break;
case 12:
remap_size = HDMI_VP_REMAP_YCC422_24bit;
break;
default:
return;
}
output_select = HDMI_VP_CONF_OUTPUT_SELECTOR_YCC422;
} else {
return;
}
/* set the packetizer registers */
val = ((color_depth << HDMI_VP_PR_CD_COLOR_DEPTH_OFFSET) &
HDMI_VP_PR_CD_COLOR_DEPTH_MASK) |
((hdmi_data->pix_repet_factor <<
HDMI_VP_PR_CD_DESIRED_PR_FACTOR_OFFSET) &
HDMI_VP_PR_CD_DESIRED_PR_FACTOR_MASK);
hdmi_writeb(hdmi, val, HDMI_VP_PR_CD);
hdmi_modb(hdmi, HDMI_VP_STUFF_PR_STUFFING_STUFFING_MODE,
HDMI_VP_STUFF_PR_STUFFING_MASK, HDMI_VP_STUFF);
/* Data from pixel repeater block */
if (hdmi_data->pix_repet_factor > 1) {
vp_conf = HDMI_VP_CONF_PR_EN_ENABLE |
HDMI_VP_CONF_BYPASS_SELECT_PIX_REPEATER;
} else { /* data from packetizer block */
vp_conf = HDMI_VP_CONF_PR_EN_DISABLE |
HDMI_VP_CONF_BYPASS_SELECT_VID_PACKETIZER;
}
hdmi_modb(hdmi, vp_conf,
HDMI_VP_CONF_PR_EN_MASK |
HDMI_VP_CONF_BYPASS_SELECT_MASK, HDMI_VP_CONF);
hdmi_modb(hdmi, 1 << HDMI_VP_STUFF_IDEFAULT_PHASE_OFFSET,
HDMI_VP_STUFF_IDEFAULT_PHASE_MASK, HDMI_VP_STUFF);
hdmi_writeb(hdmi, remap_size, HDMI_VP_REMAP);
if (output_select == HDMI_VP_CONF_OUTPUT_SELECTOR_PP) {
vp_conf = HDMI_VP_CONF_BYPASS_EN_DISABLE |
HDMI_VP_CONF_PP_EN_ENABLE |
HDMI_VP_CONF_YCC422_EN_DISABLE;
} else if (output_select == HDMI_VP_CONF_OUTPUT_SELECTOR_YCC422) {
vp_conf = HDMI_VP_CONF_BYPASS_EN_DISABLE |
HDMI_VP_CONF_PP_EN_DISABLE |
HDMI_VP_CONF_YCC422_EN_ENABLE;
} else if (output_select == HDMI_VP_CONF_OUTPUT_SELECTOR_BYPASS) {
vp_conf = HDMI_VP_CONF_BYPASS_EN_ENABLE |
HDMI_VP_CONF_PP_EN_DISABLE |
HDMI_VP_CONF_YCC422_EN_DISABLE;
} else {
return;
}
hdmi_modb(hdmi, vp_conf,
HDMI_VP_CONF_BYPASS_EN_MASK | HDMI_VP_CONF_PP_EN_ENMASK |
HDMI_VP_CONF_YCC422_EN_MASK, HDMI_VP_CONF);
hdmi_modb(hdmi, HDMI_VP_STUFF_PP_STUFFING_STUFFING_MODE |
HDMI_VP_STUFF_YCC422_STUFFING_STUFFING_MODE,
HDMI_VP_STUFF_PP_STUFFING_MASK |
HDMI_VP_STUFF_YCC422_STUFFING_MASK, HDMI_VP_STUFF);
hdmi_modb(hdmi, output_select, HDMI_VP_CONF_OUTPUT_SELECTOR_MASK,
HDMI_VP_CONF);
}
/* -----------------------------------------------------------------------------
* Synopsys PHY Handling
*/
static inline void hdmi_phy_test_clear(struct dw_hdmi *hdmi,
unsigned char bit)
{
hdmi_modb(hdmi, bit << HDMI_PHY_TST0_TSTCLR_OFFSET,
HDMI_PHY_TST0_TSTCLR_MASK, HDMI_PHY_TST0);
}
static bool hdmi_phy_wait_i2c_done(struct dw_hdmi *hdmi, int msec)
{
u32 val;
while ((val = hdmi_readb(hdmi, HDMI_IH_I2CMPHY_STAT0) & 0x3) == 0) {
if (msec-- == 0)
return false;
udelay(1000);
}
hdmi_writeb(hdmi, val, HDMI_IH_I2CMPHY_STAT0);
return true;
}
void dw_hdmi_phy_i2c_write(struct dw_hdmi *hdmi, unsigned short data,
unsigned char addr)
{
hdmi_writeb(hdmi, 0xFF, HDMI_IH_I2CMPHY_STAT0);
hdmi_writeb(hdmi, addr, HDMI_PHY_I2CM_ADDRESS_ADDR);
hdmi_writeb(hdmi, (unsigned char)(data >> 8),
HDMI_PHY_I2CM_DATAO_1_ADDR);
hdmi_writeb(hdmi, (unsigned char)(data >> 0),
HDMI_PHY_I2CM_DATAO_0_ADDR);
hdmi_writeb(hdmi, HDMI_PHY_I2CM_OPERATION_ADDR_WRITE,
HDMI_PHY_I2CM_OPERATION_ADDR);
hdmi_phy_wait_i2c_done(hdmi, 1000);
}
EXPORT_SYMBOL_GPL(dw_hdmi_phy_i2c_write);
static void dw_hdmi_phy_enable_powerdown(struct dw_hdmi *hdmi, bool enable)
{
hdmi_mask_writeb(hdmi, !enable, HDMI_PHY_CONF0,
HDMI_PHY_CONF0_PDZ_OFFSET,
HDMI_PHY_CONF0_PDZ_MASK);
}
static void dw_hdmi_phy_enable_tmds(struct dw_hdmi *hdmi, u8 enable)
{
hdmi_mask_writeb(hdmi, enable, HDMI_PHY_CONF0,
HDMI_PHY_CONF0_ENTMDS_OFFSET,
HDMI_PHY_CONF0_ENTMDS_MASK);
}
static void dw_hdmi_phy_enable_svsret(struct dw_hdmi *hdmi, u8 enable)
{
hdmi_mask_writeb(hdmi, enable, HDMI_PHY_CONF0,
HDMI_PHY_CONF0_SVSRET_OFFSET,
HDMI_PHY_CONF0_SVSRET_MASK);
}
void dw_hdmi_phy_gen2_pddq(struct dw_hdmi *hdmi, u8 enable)
{
hdmi_mask_writeb(hdmi, enable, HDMI_PHY_CONF0,
HDMI_PHY_CONF0_GEN2_PDDQ_OFFSET,
HDMI_PHY_CONF0_GEN2_PDDQ_MASK);
}
EXPORT_SYMBOL_GPL(dw_hdmi_phy_gen2_pddq);
void dw_hdmi_phy_gen2_txpwron(struct dw_hdmi *hdmi, u8 enable)
{
hdmi_mask_writeb(hdmi, enable, HDMI_PHY_CONF0,
HDMI_PHY_CONF0_GEN2_TXPWRON_OFFSET,
HDMI_PHY_CONF0_GEN2_TXPWRON_MASK);
}
EXPORT_SYMBOL_GPL(dw_hdmi_phy_gen2_txpwron);
static void dw_hdmi_phy_sel_data_en_pol(struct dw_hdmi *hdmi, u8 enable)
{
hdmi_mask_writeb(hdmi, enable, HDMI_PHY_CONF0,
HDMI_PHY_CONF0_SELDATAENPOL_OFFSET,
HDMI_PHY_CONF0_SELDATAENPOL_MASK);
}
static void dw_hdmi_phy_sel_interface_control(struct dw_hdmi *hdmi, u8 enable)
{
hdmi_mask_writeb(hdmi, enable, HDMI_PHY_CONF0,
HDMI_PHY_CONF0_SELDIPIF_OFFSET,
HDMI_PHY_CONF0_SELDIPIF_MASK);
}
void dw_hdmi_phy_reset(struct dw_hdmi *hdmi)
{
/* PHY reset. The reset signal is active high on Gen2 PHYs. */
hdmi_writeb(hdmi, HDMI_MC_PHYRSTZ_PHYRSTZ, HDMI_MC_PHYRSTZ);
hdmi_writeb(hdmi, 0, HDMI_MC_PHYRSTZ);
}
EXPORT_SYMBOL_GPL(dw_hdmi_phy_reset);
void dw_hdmi_phy_i2c_set_addr(struct dw_hdmi *hdmi, u8 address)
{
hdmi_phy_test_clear(hdmi, 1);
hdmi_writeb(hdmi, address, HDMI_PHY_I2CM_SLAVE_ADDR);
hdmi_phy_test_clear(hdmi, 0);
}
EXPORT_SYMBOL_GPL(dw_hdmi_phy_i2c_set_addr);
static void dw_hdmi_phy_power_off(struct dw_hdmi *hdmi)
{
const struct dw_hdmi_phy_data *phy = hdmi->phy.data;
unsigned int i;
u16 val;
if (phy->gen == 1) {
dw_hdmi_phy_enable_tmds(hdmi, 0);
dw_hdmi_phy_enable_powerdown(hdmi, true);
return;
}
dw_hdmi_phy_gen2_txpwron(hdmi, 0);
/*
* Wait for TX_PHY_LOCK to be deasserted to indicate that the PHY went
* to low power mode.
*/
for (i = 0; i < 5; ++i) {
val = hdmi_readb(hdmi, HDMI_PHY_STAT0);
if (!(val & HDMI_PHY_TX_PHY_LOCK))
break;
usleep_range(1000, 2000);
}
if (val & HDMI_PHY_TX_PHY_LOCK)
dev_warn(hdmi->dev, "PHY failed to power down\n");
else
dev_dbg(hdmi->dev, "PHY powered down in %u iterations\n", i);
dw_hdmi_phy_gen2_pddq(hdmi, 1);
}
static int dw_hdmi_phy_power_on(struct dw_hdmi *hdmi)
{
const struct dw_hdmi_phy_data *phy = hdmi->phy.data;
unsigned int i;
u8 val;
if (phy->gen == 1) {
dw_hdmi_phy_enable_powerdown(hdmi, false);
/* Toggle TMDS enable. */
dw_hdmi_phy_enable_tmds(hdmi, 0);
dw_hdmi_phy_enable_tmds(hdmi, 1);
return 0;
}
dw_hdmi_phy_gen2_txpwron(hdmi, 1);
dw_hdmi_phy_gen2_pddq(hdmi, 0);
/* Wait for PHY PLL lock */
for (i = 0; i < 5; ++i) {
val = hdmi_readb(hdmi, HDMI_PHY_STAT0) & HDMI_PHY_TX_PHY_LOCK;
if (val)
break;
usleep_range(1000, 2000);
}
if (!val) {
dev_err(hdmi->dev, "PHY PLL failed to lock\n");
return -ETIMEDOUT;
}
dev_dbg(hdmi->dev, "PHY PLL locked %u iterations\n", i);
return 0;
}
/*
* PHY configuration function for the DWC HDMI 3D TX PHY. Based on the available
* information the DWC MHL PHY has the same register layout and is thus also
* supported by this function.
*/
static int hdmi_phy_configure_dwc_hdmi_3d_tx(struct dw_hdmi *hdmi,
const struct dw_hdmi_plat_data *pdata,
unsigned long mpixelclock)
{
const struct dw_hdmi_mpll_config *mpll_config = pdata->mpll_cfg;
const struct dw_hdmi_curr_ctrl *curr_ctrl = pdata->cur_ctr;
const struct dw_hdmi_phy_config *phy_config = pdata->phy_config;
/* PLL/MPLL Cfg - always match on final entry */
for (; mpll_config->mpixelclock != ~0UL; mpll_config++)
if (mpixelclock <= mpll_config->mpixelclock)
break;
for (; curr_ctrl->mpixelclock != ~0UL; curr_ctrl++)
if (mpixelclock <= curr_ctrl->mpixelclock)
break;
for (; phy_config->mpixelclock != ~0UL; phy_config++)
if (mpixelclock <= phy_config->mpixelclock)
break;
if (mpll_config->mpixelclock == ~0UL ||
curr_ctrl->mpixelclock == ~0UL ||
phy_config->mpixelclock == ~0UL)
return -EINVAL;
dw_hdmi_phy_i2c_write(hdmi, mpll_config->res[0].cpce,
HDMI_3D_TX_PHY_CPCE_CTRL);
dw_hdmi_phy_i2c_write(hdmi, mpll_config->res[0].gmp,
HDMI_3D_TX_PHY_GMPCTRL);
dw_hdmi_phy_i2c_write(hdmi, curr_ctrl->curr[0],
HDMI_3D_TX_PHY_CURRCTRL);
dw_hdmi_phy_i2c_write(hdmi, 0, HDMI_3D_TX_PHY_PLLPHBYCTRL);
dw_hdmi_phy_i2c_write(hdmi, HDMI_3D_TX_PHY_MSM_CTRL_CKO_SEL_FB_CLK,
HDMI_3D_TX_PHY_MSM_CTRL);
dw_hdmi_phy_i2c_write(hdmi, phy_config->term, HDMI_3D_TX_PHY_TXTERM);
dw_hdmi_phy_i2c_write(hdmi, phy_config->sym_ctr,
HDMI_3D_TX_PHY_CKSYMTXCTRL);
dw_hdmi_phy_i2c_write(hdmi, phy_config->vlev_ctr,
HDMI_3D_TX_PHY_VLEVCTRL);
/* Override and disable clock termination. */
dw_hdmi_phy_i2c_write(hdmi, HDMI_3D_TX_PHY_CKCALCTRL_OVERRIDE,
HDMI_3D_TX_PHY_CKCALCTRL);
return 0;
}
static int hdmi_phy_configure(struct dw_hdmi *hdmi)
{
const struct dw_hdmi_phy_data *phy = hdmi->phy.data;
const struct dw_hdmi_plat_data *pdata = hdmi->plat_data;
unsigned long mpixelclock = hdmi->hdmi_data.video_mode.mpixelclock;
int ret;
dw_hdmi_phy_power_off(hdmi);
/* Leave low power consumption mode by asserting SVSRET. */
if (phy->has_svsret)
dw_hdmi_phy_enable_svsret(hdmi, 1);
dw_hdmi_phy_reset(hdmi);
hdmi_writeb(hdmi, HDMI_MC_HEACPHY_RST_ASSERT, HDMI_MC_HEACPHY_RST);
dw_hdmi_phy_i2c_set_addr(hdmi, HDMI_PHY_I2CM_SLAVE_ADDR_PHY_GEN2);
/* Write to the PHY as configured by the platform */
if (pdata->configure_phy)
ret = pdata->configure_phy(hdmi, pdata, mpixelclock);
else
ret = phy->configure(hdmi, pdata, mpixelclock);
if (ret) {
dev_err(hdmi->dev, "PHY configuration failed (clock %lu)\n",
mpixelclock);
return ret;
}
return dw_hdmi_phy_power_on(hdmi);
}
static int dw_hdmi_phy_init(struct dw_hdmi *hdmi, void *data,
struct drm_display_mode *mode)
{
int i, ret;
/* HDMI Phy spec says to do the phy initialization sequence twice */
for (i = 0; i < 2; i++) {
dw_hdmi_phy_sel_data_en_pol(hdmi, 1);
dw_hdmi_phy_sel_interface_control(hdmi, 0);
ret = hdmi_phy_configure(hdmi);
if (ret)
return ret;
}
return 0;
}
static void dw_hdmi_phy_disable(struct dw_hdmi *hdmi, void *data)
{
dw_hdmi_phy_power_off(hdmi);
}
enum drm_connector_status dw_hdmi_phy_read_hpd(struct dw_hdmi *hdmi,
void *data)
{
return hdmi_readb(hdmi, HDMI_PHY_STAT0) & HDMI_PHY_HPD ?
connector_status_connected : connector_status_disconnected;
}
EXPORT_SYMBOL_GPL(dw_hdmi_phy_read_hpd);
void dw_hdmi_phy_update_hpd(struct dw_hdmi *hdmi, void *data,
bool force, bool disabled, bool rxsense)
{
u8 old_mask = hdmi->phy_mask;
if (force || disabled || !rxsense)
hdmi->phy_mask |= HDMI_PHY_RX_SENSE;
else
hdmi->phy_mask &= ~HDMI_PHY_RX_SENSE;
if (old_mask != hdmi->phy_mask)
hdmi_writeb(hdmi, hdmi->phy_mask, HDMI_PHY_MASK0);
}
EXPORT_SYMBOL_GPL(dw_hdmi_phy_update_hpd);
void dw_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi, void *data)
{
/*
* Configure the PHY RX SENSE and HPD interrupts polarities and clear
* any pending interrupt.
*/
hdmi_writeb(hdmi, HDMI_PHY_HPD | HDMI_PHY_RX_SENSE, HDMI_PHY_POL0);
hdmi_writeb(hdmi, HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE,
HDMI_IH_PHY_STAT0);
/* Enable cable hot plug irq. */
hdmi_writeb(hdmi, hdmi->phy_mask, HDMI_PHY_MASK0);
/* Clear and unmute interrupts. */
hdmi_writeb(hdmi, HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE,
HDMI_IH_PHY_STAT0);
hdmi_writeb(hdmi, ~(HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE),
HDMI_IH_MUTE_PHY_STAT0);
}
EXPORT_SYMBOL_GPL(dw_hdmi_phy_setup_hpd);
static const struct dw_hdmi_phy_ops dw_hdmi_synopsys_phy_ops = {
.init = dw_hdmi_phy_init,
.disable = dw_hdmi_phy_disable,
.read_hpd = dw_hdmi_phy_read_hpd,
.update_hpd = dw_hdmi_phy_update_hpd,
.setup_hpd = dw_hdmi_phy_setup_hpd,
};
/* -----------------------------------------------------------------------------
* HDMI TX Setup
*/
static void hdmi_tx_hdcp_config(struct dw_hdmi *hdmi)
{
u8 de;
if (hdmi->hdmi_data.video_mode.mdataenablepolarity)
de = HDMI_A_VIDPOLCFG_DATAENPOL_ACTIVE_HIGH;
else
de = HDMI_A_VIDPOLCFG_DATAENPOL_ACTIVE_LOW;
/* disable rx detect */
hdmi_modb(hdmi, HDMI_A_HDCPCFG0_RXDETECT_DISABLE,
HDMI_A_HDCPCFG0_RXDETECT_MASK, HDMI_A_HDCPCFG0);
hdmi_modb(hdmi, de, HDMI_A_VIDPOLCFG_DATAENPOL_MASK, HDMI_A_VIDPOLCFG);
hdmi_modb(hdmi, HDMI_A_HDCPCFG1_ENCRYPTIONDISABLE_DISABLE,
HDMI_A_HDCPCFG1_ENCRYPTIONDISABLE_MASK, HDMI_A_HDCPCFG1);
}
static void hdmi_config_AVI(struct dw_hdmi *hdmi, struct drm_display_mode *mode)
{
struct hdmi_avi_infoframe frame;
u8 val;
/* Initialise info frame from DRM mode */
drm: handle HDMI 2.0 VICs in AVI info-frames HDMI 1.4b support the CEA video modes as per range of CEA-861-D (VIC 1-64). For any other mode, the VIC filed in AVI infoframes should be 0. HDMI 2.0 sinks, support video modes range as per CEA-861-F spec, which is extended to (VIC 1-107). This patch adds a bool input variable, which indicates if the connected sink is a HDMI 2.0 sink or not. This will make sure that we don't pass a HDMI 2.0 VIC to a HDMI 1.4 sink. This patch touches all drm drivers, who are callers of this function drm_hdmi_avi_infoframe_from_display_mode but to make sure there is no change in current behavior, is_hdmi2 is kept as false. In case of I915 driver, this patch: - checks if the connected display is HDMI 2.0. - HDMI infoframes carry one of this two type of information: - VIC for 4K modes for HDMI 1.4 sinks - S3D information for S3D modes As CEA-861-F has already defined VICs for 4K videomodes, this patch doesn't allow sending HDMI infoframes for HDMI 2.0 sinks, until the mode is 3D. Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Jose Abreu <jose.abreu@synopsys.com> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Daniel Vetter <daniel.vetter@intel.com> PS: This patch touches a few lines in few files, which were already above 80 char, so checkpatch gives 80 char warning again. - gpu/drm/omapdrm/omap_encoder.c - gpu/drm/i915/intel_sdvo.c V2: Rebase, Added r-b from Andrzej V3: Addressed review comment from Ville: - Do not send VICs in both AVI-IF and HDMI-IF send only one of it. V4: Rebase V5: Added r-b from Neil. Addressed review comments from Ville - Do not block HDMI vendor IF, instead check for VIC while handling AVI infoframes V6: Rebase V7: Rebase Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1499960000-9232-2-git-send-email-shashank.sharma@intel.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2017-07-13 15:33:07 +00:00
drm_hdmi_avi_infoframe_from_display_mode(&frame, mode, false);
if (hdmi_bus_fmt_is_yuv444(hdmi->hdmi_data.enc_out_bus_format))
frame.colorspace = HDMI_COLORSPACE_YUV444;
else if (hdmi_bus_fmt_is_yuv422(hdmi->hdmi_data.enc_out_bus_format))
frame.colorspace = HDMI_COLORSPACE_YUV422;
else
frame.colorspace = HDMI_COLORSPACE_RGB;
/* Set up colorimetry */
switch (hdmi->hdmi_data.enc_out_encoding) {
case V4L2_YCBCR_ENC_601:
if (hdmi->hdmi_data.enc_in_encoding == V4L2_YCBCR_ENC_XV601)
frame.colorimetry = HDMI_COLORIMETRY_EXTENDED;
else
frame.colorimetry = HDMI_COLORIMETRY_ITU_601;
frame.extended_colorimetry =
HDMI_EXTENDED_COLORIMETRY_XV_YCC_601;
break;
case V4L2_YCBCR_ENC_709:
if (hdmi->hdmi_data.enc_in_encoding == V4L2_YCBCR_ENC_XV709)
frame.colorimetry = HDMI_COLORIMETRY_EXTENDED;
else
frame.colorimetry = HDMI_COLORIMETRY_ITU_709;
frame.extended_colorimetry =
HDMI_EXTENDED_COLORIMETRY_XV_YCC_709;
break;
default: /* Carries no data */
frame.colorimetry = HDMI_COLORIMETRY_ITU_601;
frame.extended_colorimetry =
HDMI_EXTENDED_COLORIMETRY_XV_YCC_601;
break;
}
frame.scan_mode = HDMI_SCAN_MODE_NONE;
/*
* The Designware IP uses a different byte format from standard
* AVI info frames, though generally the bits are in the correct
* bytes.
*/
/*
* AVI data byte 1 differences: Colorspace in bits 0,1 rather than 5,6,
* scan info in bits 4,5 rather than 0,1 and active aspect present in
* bit 6 rather than 4.
*/
val = (frame.scan_mode & 3) << 4 | (frame.colorspace & 3);
if (frame.active_aspect & 15)
val |= HDMI_FC_AVICONF0_ACTIVE_FMT_INFO_PRESENT;
if (frame.top_bar || frame.bottom_bar)
val |= HDMI_FC_AVICONF0_BAR_DATA_HORIZ_BAR;
if (frame.left_bar || frame.right_bar)
val |= HDMI_FC_AVICONF0_BAR_DATA_VERT_BAR;
hdmi_writeb(hdmi, val, HDMI_FC_AVICONF0);
/* AVI data byte 2 differences: none */
val = ((frame.colorimetry & 0x3) << 6) |
((frame.picture_aspect & 0x3) << 4) |
(frame.active_aspect & 0xf);
hdmi_writeb(hdmi, val, HDMI_FC_AVICONF1);
/* AVI data byte 3 differences: none */
val = ((frame.extended_colorimetry & 0x7) << 4) |
((frame.quantization_range & 0x3) << 2) |
(frame.nups & 0x3);
if (frame.itc)
val |= HDMI_FC_AVICONF2_IT_CONTENT_VALID;
hdmi_writeb(hdmi, val, HDMI_FC_AVICONF2);
/* AVI data byte 4 differences: none */
val = frame.video_code & 0x7f;
hdmi_writeb(hdmi, val, HDMI_FC_AVIVID);
/* AVI Data Byte 5- set up input and output pixel repetition */
val = (((hdmi->hdmi_data.video_mode.mpixelrepetitioninput + 1) <<
HDMI_FC_PRCONF_INCOMING_PR_FACTOR_OFFSET) &
HDMI_FC_PRCONF_INCOMING_PR_FACTOR_MASK) |
((hdmi->hdmi_data.video_mode.mpixelrepetitionoutput <<
HDMI_FC_PRCONF_OUTPUT_PR_FACTOR_OFFSET) &
HDMI_FC_PRCONF_OUTPUT_PR_FACTOR_MASK);
hdmi_writeb(hdmi, val, HDMI_FC_PRCONF);
/*
* AVI data byte 5 differences: content type in 0,1 rather than 4,5,
* ycc range in bits 2,3 rather than 6,7
*/
val = ((frame.ycc_quantization_range & 0x3) << 2) |
(frame.content_type & 0x3);
hdmi_writeb(hdmi, val, HDMI_FC_AVICONF3);
/* AVI Data Bytes 6-13 */
hdmi_writeb(hdmi, frame.top_bar & 0xff, HDMI_FC_AVIETB0);
hdmi_writeb(hdmi, (frame.top_bar >> 8) & 0xff, HDMI_FC_AVIETB1);
hdmi_writeb(hdmi, frame.bottom_bar & 0xff, HDMI_FC_AVISBB0);
hdmi_writeb(hdmi, (frame.bottom_bar >> 8) & 0xff, HDMI_FC_AVISBB1);
hdmi_writeb(hdmi, frame.left_bar & 0xff, HDMI_FC_AVIELB0);
hdmi_writeb(hdmi, (frame.left_bar >> 8) & 0xff, HDMI_FC_AVIELB1);
hdmi_writeb(hdmi, frame.right_bar & 0xff, HDMI_FC_AVISRB0);
hdmi_writeb(hdmi, (frame.right_bar >> 8) & 0xff, HDMI_FC_AVISRB1);
}
static void hdmi_config_vendor_specific_infoframe(struct dw_hdmi *hdmi,
struct drm_display_mode *mode)
{
struct hdmi_vendor_infoframe frame;
u8 buffer[10];
ssize_t err;
2017-11-13 17:04:19 +00:00
err = drm_hdmi_vendor_infoframe_from_display_mode(&frame,
&hdmi->connector,
mode);
if (err < 0)
/*
* Going into that statement does not means vendor infoframe
* fails. It just informed us that vendor infoframe is not
* needed for the selected mode. Only 4k or stereoscopic 3D
* mode requires vendor infoframe. So just simply return.
*/
return;
err = hdmi_vendor_infoframe_pack(&frame, buffer, sizeof(buffer));
if (err < 0) {
dev_err(hdmi->dev, "Failed to pack vendor infoframe: %zd\n",
err);
return;
}
hdmi_mask_writeb(hdmi, 0, HDMI_FC_DATAUTO0, HDMI_FC_DATAUTO0_VSD_OFFSET,
HDMI_FC_DATAUTO0_VSD_MASK);
/* Set the length of HDMI vendor specific InfoFrame payload */
hdmi_writeb(hdmi, buffer[2], HDMI_FC_VSDSIZE);
/* Set 24bit IEEE Registration Identifier */
hdmi_writeb(hdmi, buffer[4], HDMI_FC_VSDIEEEID0);
hdmi_writeb(hdmi, buffer[5], HDMI_FC_VSDIEEEID1);
hdmi_writeb(hdmi, buffer[6], HDMI_FC_VSDIEEEID2);
/* Set HDMI_Video_Format and HDMI_VIC/3D_Structure */
hdmi_writeb(hdmi, buffer[7], HDMI_FC_VSDPAYLOAD0);
hdmi_writeb(hdmi, buffer[8], HDMI_FC_VSDPAYLOAD1);
if (frame.s3d_struct >= HDMI_3D_STRUCTURE_SIDE_BY_SIDE_HALF)
hdmi_writeb(hdmi, buffer[9], HDMI_FC_VSDPAYLOAD2);
/* Packet frame interpolation */
hdmi_writeb(hdmi, 1, HDMI_FC_DATAUTO1);
/* Auto packets per frame and line spacing */
hdmi_writeb(hdmi, 0x11, HDMI_FC_DATAUTO2);
/* Configures the Frame Composer On RDRB mode */
hdmi_mask_writeb(hdmi, 1, HDMI_FC_DATAUTO0, HDMI_FC_DATAUTO0_VSD_OFFSET,
HDMI_FC_DATAUTO0_VSD_MASK);
}
static void hdmi_av_composer(struct dw_hdmi *hdmi,
const struct drm_display_mode *mode)
{
u8 inv_val;
struct hdmi_vmode *vmode = &hdmi->hdmi_data.video_mode;
int hblank, vblank, h_de_hs, v_de_vs, hsync_len, vsync_len;
unsigned int vdisplay;
vmode->mpixelclock = mode->clock * 1000;
dev_dbg(hdmi->dev, "final pixclk = %d\n", vmode->mpixelclock);
/* Set up HDMI_FC_INVIDCONF */
inv_val = (hdmi->hdmi_data.hdcp_enable ?
HDMI_FC_INVIDCONF_HDCP_KEEPOUT_ACTIVE :
HDMI_FC_INVIDCONF_HDCP_KEEPOUT_INACTIVE);
inv_val |= mode->flags & DRM_MODE_FLAG_PVSYNC ?
HDMI_FC_INVIDCONF_VSYNC_IN_POLARITY_ACTIVE_HIGH :
HDMI_FC_INVIDCONF_VSYNC_IN_POLARITY_ACTIVE_LOW;
inv_val |= mode->flags & DRM_MODE_FLAG_PHSYNC ?
HDMI_FC_INVIDCONF_HSYNC_IN_POLARITY_ACTIVE_HIGH :
HDMI_FC_INVIDCONF_HSYNC_IN_POLARITY_ACTIVE_LOW;
inv_val |= (vmode->mdataenablepolarity ?
HDMI_FC_INVIDCONF_DE_IN_POLARITY_ACTIVE_HIGH :
HDMI_FC_INVIDCONF_DE_IN_POLARITY_ACTIVE_LOW);
if (hdmi->vic == 39)
inv_val |= HDMI_FC_INVIDCONF_R_V_BLANK_IN_OSC_ACTIVE_HIGH;
else
inv_val |= mode->flags & DRM_MODE_FLAG_INTERLACE ?
HDMI_FC_INVIDCONF_R_V_BLANK_IN_OSC_ACTIVE_HIGH :
HDMI_FC_INVIDCONF_R_V_BLANK_IN_OSC_ACTIVE_LOW;
inv_val |= mode->flags & DRM_MODE_FLAG_INTERLACE ?
HDMI_FC_INVIDCONF_IN_I_P_INTERLACED :
HDMI_FC_INVIDCONF_IN_I_P_PROGRESSIVE;
inv_val |= hdmi->sink_is_hdmi ?
HDMI_FC_INVIDCONF_DVI_MODEZ_HDMI_MODE :
HDMI_FC_INVIDCONF_DVI_MODEZ_DVI_MODE;
hdmi_writeb(hdmi, inv_val, HDMI_FC_INVIDCONF);
vdisplay = mode->vdisplay;
vblank = mode->vtotal - mode->vdisplay;
v_de_vs = mode->vsync_start - mode->vdisplay;
vsync_len = mode->vsync_end - mode->vsync_start;
/*
* When we're setting an interlaced mode, we need
* to adjust the vertical timing to suit.
*/
if (mode->flags & DRM_MODE_FLAG_INTERLACE) {
vdisplay /= 2;
vblank /= 2;
v_de_vs /= 2;
vsync_len /= 2;
}
/* Set up horizontal active pixel width */
hdmi_writeb(hdmi, mode->hdisplay >> 8, HDMI_FC_INHACTV1);
hdmi_writeb(hdmi, mode->hdisplay, HDMI_FC_INHACTV0);
/* Set up vertical active lines */
hdmi_writeb(hdmi, vdisplay >> 8, HDMI_FC_INVACTV1);
hdmi_writeb(hdmi, vdisplay, HDMI_FC_INVACTV0);
/* Set up horizontal blanking pixel region width */
hblank = mode->htotal - mode->hdisplay;
hdmi_writeb(hdmi, hblank >> 8, HDMI_FC_INHBLANK1);
hdmi_writeb(hdmi, hblank, HDMI_FC_INHBLANK0);
/* Set up vertical blanking pixel region width */
hdmi_writeb(hdmi, vblank, HDMI_FC_INVBLANK);
/* Set up HSYNC active edge delay width (in pixel clks) */
h_de_hs = mode->hsync_start - mode->hdisplay;
hdmi_writeb(hdmi, h_de_hs >> 8, HDMI_FC_HSYNCINDELAY1);
hdmi_writeb(hdmi, h_de_hs, HDMI_FC_HSYNCINDELAY0);
/* Set up VSYNC active edge delay (in lines) */
hdmi_writeb(hdmi, v_de_vs, HDMI_FC_VSYNCINDELAY);
/* Set up HSYNC active pulse width (in pixel clks) */
hsync_len = mode->hsync_end - mode->hsync_start;
hdmi_writeb(hdmi, hsync_len >> 8, HDMI_FC_HSYNCINWIDTH1);
hdmi_writeb(hdmi, hsync_len, HDMI_FC_HSYNCINWIDTH0);
/* Set up VSYNC active edge delay (in lines) */
hdmi_writeb(hdmi, vsync_len, HDMI_FC_VSYNCINWIDTH);
}
/* HDMI Initialization Step B.4 */
static void dw_hdmi_enable_video_path(struct dw_hdmi *hdmi)
{
/* control period minimum duration */
hdmi_writeb(hdmi, 12, HDMI_FC_CTRLDUR);
hdmi_writeb(hdmi, 32, HDMI_FC_EXCTRLDUR);
hdmi_writeb(hdmi, 1, HDMI_FC_EXCTRLSPAC);
/* Set to fill TMDS data channels */
hdmi_writeb(hdmi, 0x0B, HDMI_FC_CH0PREAM);
hdmi_writeb(hdmi, 0x16, HDMI_FC_CH1PREAM);
hdmi_writeb(hdmi, 0x21, HDMI_FC_CH2PREAM);
/* Enable pixel clock and tmds data path */
hdmi->mc_clkdis |= HDMI_MC_CLKDIS_HDCPCLK_DISABLE |
HDMI_MC_CLKDIS_CSCCLK_DISABLE |
HDMI_MC_CLKDIS_AUDCLK_DISABLE |
HDMI_MC_CLKDIS_PREPCLK_DISABLE |
HDMI_MC_CLKDIS_TMDSCLK_DISABLE;
hdmi->mc_clkdis &= ~HDMI_MC_CLKDIS_PIXELCLK_DISABLE;
hdmi_writeb(hdmi, hdmi->mc_clkdis, HDMI_MC_CLKDIS);
hdmi->mc_clkdis &= ~HDMI_MC_CLKDIS_TMDSCLK_DISABLE;
hdmi_writeb(hdmi, hdmi->mc_clkdis, HDMI_MC_CLKDIS);
/* Enable csc path */
if (is_color_space_conversion(hdmi)) {
hdmi->mc_clkdis &= ~HDMI_MC_CLKDIS_CSCCLK_DISABLE;
hdmi_writeb(hdmi, hdmi->mc_clkdis, HDMI_MC_CLKDIS);
}
/* Enable color space conversion if needed */
if (is_color_space_conversion(hdmi))
hdmi_writeb(hdmi, HDMI_MC_FLOWCTRL_FEED_THROUGH_OFF_CSC_IN_PATH,
HDMI_MC_FLOWCTRL);
else
hdmi_writeb(hdmi, HDMI_MC_FLOWCTRL_FEED_THROUGH_OFF_CSC_BYPASS,
HDMI_MC_FLOWCTRL);
}
/* Workaround to clear the overflow condition */
static void dw_hdmi_clear_overflow(struct dw_hdmi *hdmi)
{
unsigned int count;
unsigned int i;
u8 val;
/*
* Under some circumstances the Frame Composer arithmetic unit can miss
* an FC register write due to being busy processing the previous one.
* The issue can be worked around by issuing a TMDS software reset and
* then write one of the FC registers several times.
*
* The number of iterations matters and depends on the HDMI TX revision
* (and possibly on the platform). So far i.MX6Q (v1.30a), i.MX6DL
* (v1.31a) and multiple Allwinner SoCs (v1.32a) have been identified
* as needing the workaround, with 4 iterations for v1.30a and 1
* iteration for others.
* The Amlogic Meson GX SoCs (v2.01a) have been identified as needing
* the workaround with a single iteration.
*/
switch (hdmi->version) {
case 0x130a:
count = 4;
break;
case 0x131a:
case 0x132a:
case 0x201a:
count = 1;
break;
default:
return;
}
/* TMDS software reset */
hdmi_writeb(hdmi, (u8)~HDMI_MC_SWRSTZ_TMDSSWRST_REQ, HDMI_MC_SWRSTZ);
val = hdmi_readb(hdmi, HDMI_FC_INVIDCONF);
for (i = 0; i < count; i++)
hdmi_writeb(hdmi, val, HDMI_FC_INVIDCONF);
}
static void hdmi_disable_overflow_interrupts(struct dw_hdmi *hdmi)
{
hdmi_writeb(hdmi, HDMI_IH_MUTE_FC_STAT2_OVERFLOW_MASK,
HDMI_IH_MUTE_FC_STAT2);
}
static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct drm_display_mode *mode)
{
int ret;
hdmi_disable_overflow_interrupts(hdmi);
hdmi->vic = drm_match_cea_mode(mode);
if (!hdmi->vic) {
dev_dbg(hdmi->dev, "Non-CEA mode used in HDMI\n");
} else {
dev_dbg(hdmi->dev, "CEA mode used vic=%d\n", hdmi->vic);
}
if ((hdmi->vic == 6) || (hdmi->vic == 7) ||
(hdmi->vic == 21) || (hdmi->vic == 22) ||
(hdmi->vic == 2) || (hdmi->vic == 3) ||
(hdmi->vic == 17) || (hdmi->vic == 18))
hdmi->hdmi_data.enc_out_encoding = V4L2_YCBCR_ENC_601;
else
hdmi->hdmi_data.enc_out_encoding = V4L2_YCBCR_ENC_709;
hdmi->hdmi_data.video_mode.mpixelrepetitionoutput = 0;
hdmi->hdmi_data.video_mode.mpixelrepetitioninput = 0;
/* TOFIX: Get input format from plat data or fallback to RGB888 */
if (hdmi->plat_data->input_bus_format)
hdmi->hdmi_data.enc_in_bus_format =
hdmi->plat_data->input_bus_format;
else
hdmi->hdmi_data.enc_in_bus_format = MEDIA_BUS_FMT_RGB888_1X24;
/* TOFIX: Get input encoding from plat data or fallback to none */
if (hdmi->plat_data->input_bus_encoding)
hdmi->hdmi_data.enc_in_encoding =
hdmi->plat_data->input_bus_encoding;
else
hdmi->hdmi_data.enc_in_encoding = V4L2_YCBCR_ENC_DEFAULT;
/* TOFIX: Default to RGB888 output format */
hdmi->hdmi_data.enc_out_bus_format = MEDIA_BUS_FMT_RGB888_1X24;
hdmi->hdmi_data.pix_repet_factor = 0;
hdmi->hdmi_data.hdcp_enable = 0;
hdmi->hdmi_data.video_mode.mdataenablepolarity = true;
/* HDMI Initialization Step B.1 */
hdmi_av_composer(hdmi, mode);
/* HDMI Initializateion Step B.2 */
ret = hdmi->phy.ops->init(hdmi, hdmi->phy.data, &hdmi->previous_mode);
if (ret)
return ret;
hdmi->phy.enabled = true;
/* HDMI Initialization Step B.3 */
dw_hdmi_enable_video_path(hdmi);
if (hdmi->sink_has_audio) {
dev_dbg(hdmi->dev, "sink has audio support\n");
/* HDMI Initialization Step E - Configure audio */
hdmi_clk_regenerator_update_pixel_clock(hdmi);
hdmi_enable_audio_clk(hdmi, true);
}
/* not for DVI mode */
if (hdmi->sink_is_hdmi) {
dev_dbg(hdmi->dev, "%s HDMI mode\n", __func__);
/* HDMI Initialization Step F - Configure AVI InfoFrame */
hdmi_config_AVI(hdmi, mode);
hdmi_config_vendor_specific_infoframe(hdmi, mode);
} else {
dev_dbg(hdmi->dev, "%s DVI mode\n", __func__);
}
hdmi_video_packetize(hdmi);
hdmi_video_csc(hdmi);
hdmi_video_sample(hdmi);
hdmi_tx_hdcp_config(hdmi);
dw_hdmi_clear_overflow(hdmi);
return 0;
}
static void dw_hdmi_setup_i2c(struct dw_hdmi *hdmi)
{
hdmi_writeb(hdmi, HDMI_PHY_I2CM_INT_ADDR_DONE_POL,
HDMI_PHY_I2CM_INT_ADDR);
hdmi_writeb(hdmi, HDMI_PHY_I2CM_CTLINT_ADDR_NAC_POL |
HDMI_PHY_I2CM_CTLINT_ADDR_ARBITRATION_POL,
HDMI_PHY_I2CM_CTLINT_ADDR);
}
static void initialize_hdmi_ih_mutes(struct dw_hdmi *hdmi)
{
u8 ih_mute;
/*
* Boot up defaults are:
* HDMI_IH_MUTE = 0x03 (disabled)
* HDMI_IH_MUTE_* = 0x00 (enabled)
*
* Disable top level interrupt bits in HDMI block
*/
ih_mute = hdmi_readb(hdmi, HDMI_IH_MUTE) |
HDMI_IH_MUTE_MUTE_WAKEUP_INTERRUPT |
HDMI_IH_MUTE_MUTE_ALL_INTERRUPT;
hdmi_writeb(hdmi, ih_mute, HDMI_IH_MUTE);
/* by default mask all interrupts */
hdmi_writeb(hdmi, 0xff, HDMI_VP_MASK);
hdmi_writeb(hdmi, 0xff, HDMI_FC_MASK0);
hdmi_writeb(hdmi, 0xff, HDMI_FC_MASK1);
hdmi_writeb(hdmi, 0xff, HDMI_FC_MASK2);
hdmi_writeb(hdmi, 0xff, HDMI_PHY_MASK0);
hdmi_writeb(hdmi, 0xff, HDMI_PHY_I2CM_INT_ADDR);
hdmi_writeb(hdmi, 0xff, HDMI_PHY_I2CM_CTLINT_ADDR);
hdmi_writeb(hdmi, 0xff, HDMI_AUD_INT);
hdmi_writeb(hdmi, 0xff, HDMI_AUD_SPDIFINT);
hdmi_writeb(hdmi, 0xff, HDMI_AUD_HBR_MASK);
hdmi_writeb(hdmi, 0xff, HDMI_GP_MASK);
hdmi_writeb(hdmi, 0xff, HDMI_A_APIINTMSK);
hdmi_writeb(hdmi, 0xff, HDMI_I2CM_INT);
hdmi_writeb(hdmi, 0xff, HDMI_I2CM_CTLINT);
/* Disable interrupts in the IH_MUTE_* registers */
hdmi_writeb(hdmi, 0xff, HDMI_IH_MUTE_FC_STAT0);
hdmi_writeb(hdmi, 0xff, HDMI_IH_MUTE_FC_STAT1);
hdmi_writeb(hdmi, 0xff, HDMI_IH_MUTE_FC_STAT2);
hdmi_writeb(hdmi, 0xff, HDMI_IH_MUTE_AS_STAT0);
hdmi_writeb(hdmi, 0xff, HDMI_IH_MUTE_PHY_STAT0);
hdmi_writeb(hdmi, 0xff, HDMI_IH_MUTE_I2CM_STAT0);
hdmi_writeb(hdmi, 0xff, HDMI_IH_MUTE_CEC_STAT0);
hdmi_writeb(hdmi, 0xff, HDMI_IH_MUTE_VP_STAT0);
hdmi_writeb(hdmi, 0xff, HDMI_IH_MUTE_I2CMPHY_STAT0);
hdmi_writeb(hdmi, 0xff, HDMI_IH_MUTE_AHBDMAAUD_STAT0);
/* Enable top level interrupt bits in HDMI block */
ih_mute &= ~(HDMI_IH_MUTE_MUTE_WAKEUP_INTERRUPT |
HDMI_IH_MUTE_MUTE_ALL_INTERRUPT);
hdmi_writeb(hdmi, ih_mute, HDMI_IH_MUTE);
}
static void dw_hdmi_poweron(struct dw_hdmi *hdmi)
{
hdmi->bridge_is_on = true;
dw_hdmi_setup(hdmi, &hdmi->previous_mode);
}
static void dw_hdmi_poweroff(struct dw_hdmi *hdmi)
{
if (hdmi->phy.enabled) {
hdmi->phy.ops->disable(hdmi, hdmi->phy.data);
hdmi->phy.enabled = false;
}
hdmi->bridge_is_on = false;
}
static void dw_hdmi_update_power(struct dw_hdmi *hdmi)
{
int force = hdmi->force;
if (hdmi->disabled) {
force = DRM_FORCE_OFF;
} else if (force == DRM_FORCE_UNSPECIFIED) {
drm: bridge/dw_hdmi: improve HDMI enable/disable handling HDMI sinks are permitted to de-assert and re-assert the HPD signal to indicate that their EDID has been updated, which may not involve a change of video information. An example of where such a situation can arise is when an AV receiver is connected between the source and the display device. Events which can cause the HPD to be deasserted include: * turning on or switching to standby the AV receiver. * turning on or switching to standby the display device. Each of these can change the entire EDID data, or just a part of the EDID data - it's up to the connected HDMI sink to do what they desire here. For example - with the AV receiver and display device both in standby, a source connected to the AV receiver may provide its own EDID to the source. - turning on the display device causes the display device's EDID to be made available in an unmodified form to the source. - subsequently turning on the AV receiver then provides a modified version of the display device's EDID. Moreover, HPD doesn't tell us whether something is actually listening on the HDMI TDMS signals. The phy gives us a set of RXSENSE indications which tell us whether there is a sink connected to the TMDS signals. Currently, we use the HPD signal to enable or disable the HDMI block, which is questionable when HPD is used in this manner. Using the RXSENSE would be more appropriate, but there is some bad behaviour which needs to be coped with. The iMX6 implementation lets the TMDS signals float when the phy is "powered down", which cause spurious interrupts. Rather than just using RXSENSE, use RXSENSE and HPD becoming both active to signal the presence of a device, but loss of RXSENSE to indicate that the device has been unplugged. The side effect of this change is that a sink deasserting the HPD signal to cause a re-read of the EDID data will not cause the bridge to immediately disable the video signal. Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-06-05 12:46:22 +00:00
if (hdmi->rxsense)
force = DRM_FORCE_ON;
else
force = DRM_FORCE_OFF;
}
if (force == DRM_FORCE_OFF) {
if (hdmi->bridge_is_on)
dw_hdmi_poweroff(hdmi);
} else {
if (!hdmi->bridge_is_on)
dw_hdmi_poweron(hdmi);
}
}
drm: bridge/dw_hdmi: improve HDMI enable/disable handling HDMI sinks are permitted to de-assert and re-assert the HPD signal to indicate that their EDID has been updated, which may not involve a change of video information. An example of where such a situation can arise is when an AV receiver is connected between the source and the display device. Events which can cause the HPD to be deasserted include: * turning on or switching to standby the AV receiver. * turning on or switching to standby the display device. Each of these can change the entire EDID data, or just a part of the EDID data - it's up to the connected HDMI sink to do what they desire here. For example - with the AV receiver and display device both in standby, a source connected to the AV receiver may provide its own EDID to the source. - turning on the display device causes the display device's EDID to be made available in an unmodified form to the source. - subsequently turning on the AV receiver then provides a modified version of the display device's EDID. Moreover, HPD doesn't tell us whether something is actually listening on the HDMI TDMS signals. The phy gives us a set of RXSENSE indications which tell us whether there is a sink connected to the TMDS signals. Currently, we use the HPD signal to enable or disable the HDMI block, which is questionable when HPD is used in this manner. Using the RXSENSE would be more appropriate, but there is some bad behaviour which needs to be coped with. The iMX6 implementation lets the TMDS signals float when the phy is "powered down", which cause spurious interrupts. Rather than just using RXSENSE, use RXSENSE and HPD becoming both active to signal the presence of a device, but loss of RXSENSE to indicate that the device has been unplugged. The side effect of this change is that a sink deasserting the HPD signal to cause a re-read of the EDID data will not cause the bridge to immediately disable the video signal. Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-06-05 12:46:22 +00:00
/*
* Adjust the detection of RXSENSE according to whether we have a forced
* connection mode enabled, or whether we have been disabled. There is
* no point processing RXSENSE interrupts if we have a forced connection
* state, or DRM has us disabled.
*
* We also disable rxsense interrupts when we think we're disconnected
* to avoid floating TDMS signals giving false rxsense interrupts.
*
* Note: we still need to listen for HPD interrupts even when DRM has us
* disabled so that we can detect a connect event.
*/
static void dw_hdmi_update_phy_mask(struct dw_hdmi *hdmi)
{
if (hdmi->phy.ops->update_hpd)
hdmi->phy.ops->update_hpd(hdmi, hdmi->phy.data,
hdmi->force, hdmi->disabled,
hdmi->rxsense);
}
static enum drm_connector_status
dw_hdmi_connector_detect(struct drm_connector *connector, bool force)
{
struct dw_hdmi *hdmi = container_of(connector, struct dw_hdmi,
connector);
mutex_lock(&hdmi->mutex);
hdmi->force = DRM_FORCE_UNSPECIFIED;
dw_hdmi_update_power(hdmi);
drm: bridge/dw_hdmi: improve HDMI enable/disable handling HDMI sinks are permitted to de-assert and re-assert the HPD signal to indicate that their EDID has been updated, which may not involve a change of video information. An example of where such a situation can arise is when an AV receiver is connected between the source and the display device. Events which can cause the HPD to be deasserted include: * turning on or switching to standby the AV receiver. * turning on or switching to standby the display device. Each of these can change the entire EDID data, or just a part of the EDID data - it's up to the connected HDMI sink to do what they desire here. For example - with the AV receiver and display device both in standby, a source connected to the AV receiver may provide its own EDID to the source. - turning on the display device causes the display device's EDID to be made available in an unmodified form to the source. - subsequently turning on the AV receiver then provides a modified version of the display device's EDID. Moreover, HPD doesn't tell us whether something is actually listening on the HDMI TDMS signals. The phy gives us a set of RXSENSE indications which tell us whether there is a sink connected to the TMDS signals. Currently, we use the HPD signal to enable or disable the HDMI block, which is questionable when HPD is used in this manner. Using the RXSENSE would be more appropriate, but there is some bad behaviour which needs to be coped with. The iMX6 implementation lets the TMDS signals float when the phy is "powered down", which cause spurious interrupts. Rather than just using RXSENSE, use RXSENSE and HPD becoming both active to signal the presence of a device, but loss of RXSENSE to indicate that the device has been unplugged. The side effect of this change is that a sink deasserting the HPD signal to cause a re-read of the EDID data will not cause the bridge to immediately disable the video signal. Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-06-05 12:46:22 +00:00
dw_hdmi_update_phy_mask(hdmi);
mutex_unlock(&hdmi->mutex);
return hdmi->phy.ops->read_hpd(hdmi, hdmi->phy.data);
}
static int dw_hdmi_connector_get_modes(struct drm_connector *connector)
{
struct dw_hdmi *hdmi = container_of(connector, struct dw_hdmi,
connector);
struct edid *edid;
int ret = 0;
if (!hdmi->ddc)
return 0;
edid = drm_get_edid(connector, hdmi->ddc);
if (edid) {
dev_dbg(hdmi->dev, "got edid: width[%d] x height[%d]\n",
edid->width_cm, edid->height_cm);
hdmi->sink_is_hdmi = drm_detect_hdmi_monitor(edid);
hdmi->sink_has_audio = drm_detect_monitor_audio(edid);
drm_connector_update_edid_property(connector, edid);
cec_notifier_set_phys_addr_from_edid(hdmi->cec_notifier, edid);
ret = drm_add_edid_modes(connector, edid);
kfree(edid);
} else {
dev_dbg(hdmi->dev, "failed to get edid\n");
}
return ret;
}
static void dw_hdmi_connector_force(struct drm_connector *connector)
{
struct dw_hdmi *hdmi = container_of(connector, struct dw_hdmi,
connector);
mutex_lock(&hdmi->mutex);
hdmi->force = connector->force;
dw_hdmi_update_power(hdmi);
drm: bridge/dw_hdmi: improve HDMI enable/disable handling HDMI sinks are permitted to de-assert and re-assert the HPD signal to indicate that their EDID has been updated, which may not involve a change of video information. An example of where such a situation can arise is when an AV receiver is connected between the source and the display device. Events which can cause the HPD to be deasserted include: * turning on or switching to standby the AV receiver. * turning on or switching to standby the display device. Each of these can change the entire EDID data, or just a part of the EDID data - it's up to the connected HDMI sink to do what they desire here. For example - with the AV receiver and display device both in standby, a source connected to the AV receiver may provide its own EDID to the source. - turning on the display device causes the display device's EDID to be made available in an unmodified form to the source. - subsequently turning on the AV receiver then provides a modified version of the display device's EDID. Moreover, HPD doesn't tell us whether something is actually listening on the HDMI TDMS signals. The phy gives us a set of RXSENSE indications which tell us whether there is a sink connected to the TMDS signals. Currently, we use the HPD signal to enable or disable the HDMI block, which is questionable when HPD is used in this manner. Using the RXSENSE would be more appropriate, but there is some bad behaviour which needs to be coped with. The iMX6 implementation lets the TMDS signals float when the phy is "powered down", which cause spurious interrupts. Rather than just using RXSENSE, use RXSENSE and HPD becoming both active to signal the presence of a device, but loss of RXSENSE to indicate that the device has been unplugged. The side effect of this change is that a sink deasserting the HPD signal to cause a re-read of the EDID data will not cause the bridge to immediately disable the video signal. Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-06-05 12:46:22 +00:00
dw_hdmi_update_phy_mask(hdmi);
mutex_unlock(&hdmi->mutex);
}
static const struct drm_connector_funcs dw_hdmi_connector_funcs = {
.fill_modes = drm_helper_probe_single_connector_modes,
.detect = dw_hdmi_connector_detect,
.destroy = drm_connector_cleanup,
.force = dw_hdmi_connector_force,
.reset = drm_atomic_helper_connector_reset,
.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
};
static const struct drm_connector_helper_funcs dw_hdmi_connector_helper_funcs = {
.get_modes = dw_hdmi_connector_get_modes,
.best_encoder = drm_atomic_helper_best_encoder,
};
static int dw_hdmi_bridge_attach(struct drm_bridge *bridge)
{
struct dw_hdmi *hdmi = bridge->driver_private;
struct drm_encoder *encoder = bridge->encoder;
struct drm_connector *connector = &hdmi->connector;
connector->interlace_allowed = 1;
connector->polled = DRM_CONNECTOR_POLL_HPD;
drm_connector_helper_add(connector, &dw_hdmi_connector_helper_funcs);
drm_connector_init(bridge->dev, connector, &dw_hdmi_connector_funcs,
DRM_MODE_CONNECTOR_HDMIA);
drm_mode_connector_attach_encoder(connector, encoder);
return 0;
}
static enum drm_mode_status
dw_hdmi_bridge_mode_valid(struct drm_bridge *bridge,
const struct drm_display_mode *mode)
{
struct dw_hdmi *hdmi = bridge->driver_private;
struct drm_connector *connector = &hdmi->connector;
enum drm_mode_status mode_status = MODE_OK;
/* We don't support double-clocked modes */
if (mode->flags & DRM_MODE_FLAG_DBLCLK)
return MODE_BAD;
if (hdmi->plat_data->mode_valid)
mode_status = hdmi->plat_data->mode_valid(connector, mode);
return mode_status;
}
static void dw_hdmi_bridge_mode_set(struct drm_bridge *bridge,
struct drm_display_mode *orig_mode,
struct drm_display_mode *mode)
{
struct dw_hdmi *hdmi = bridge->driver_private;
mutex_lock(&hdmi->mutex);
/* Store the display mode for plugin/DKMS poweron events */
memcpy(&hdmi->previous_mode, mode, sizeof(hdmi->previous_mode));
mutex_unlock(&hdmi->mutex);
}
static void dw_hdmi_bridge_disable(struct drm_bridge *bridge)
{
struct dw_hdmi *hdmi = bridge->driver_private;
mutex_lock(&hdmi->mutex);
hdmi->disabled = true;
dw_hdmi_update_power(hdmi);
dw_hdmi_update_phy_mask(hdmi);
mutex_unlock(&hdmi->mutex);
}
static void dw_hdmi_bridge_enable(struct drm_bridge *bridge)
{
struct dw_hdmi *hdmi = bridge->driver_private;
mutex_lock(&hdmi->mutex);
hdmi->disabled = false;
dw_hdmi_update_power(hdmi);
dw_hdmi_update_phy_mask(hdmi);
mutex_unlock(&hdmi->mutex);
}
static const struct drm_bridge_funcs dw_hdmi_bridge_funcs = {
.attach = dw_hdmi_bridge_attach,
.enable = dw_hdmi_bridge_enable,
.disable = dw_hdmi_bridge_disable,
.mode_set = dw_hdmi_bridge_mode_set,
.mode_valid = dw_hdmi_bridge_mode_valid,
};
static irqreturn_t dw_hdmi_i2c_irq(struct dw_hdmi *hdmi)
{
struct dw_hdmi_i2c *i2c = hdmi->i2c;
unsigned int stat;
stat = hdmi_readb(hdmi, HDMI_IH_I2CM_STAT0);
if (!stat)
return IRQ_NONE;
hdmi_writeb(hdmi, stat, HDMI_IH_I2CM_STAT0);
i2c->stat = stat;
complete(&i2c->cmp);
return IRQ_HANDLED;
}
static irqreturn_t dw_hdmi_hardirq(int irq, void *dev_id)
{
struct dw_hdmi *hdmi = dev_id;
u8 intr_stat;
irqreturn_t ret = IRQ_NONE;
if (hdmi->i2c)
ret = dw_hdmi_i2c_irq(hdmi);
intr_stat = hdmi_readb(hdmi, HDMI_IH_PHY_STAT0);
if (intr_stat) {
hdmi_writeb(hdmi, ~0, HDMI_IH_MUTE_PHY_STAT0);
return IRQ_WAKE_THREAD;
}
return ret;
}
void dw_hdmi_setup_rx_sense(struct dw_hdmi *hdmi, bool hpd, bool rx_sense)
{
mutex_lock(&hdmi->mutex);
if (!hdmi->force) {
/*
* If the RX sense status indicates we're disconnected,
* clear the software rxsense status.
*/
if (!rx_sense)
hdmi->rxsense = false;
/*
* Only set the software rxsense status when both
* rxsense and hpd indicates we're connected.
* This avoids what seems to be bad behaviour in
* at least iMX6S versions of the phy.
*/
if (hpd)
hdmi->rxsense = true;
dw_hdmi_update_power(hdmi);
dw_hdmi_update_phy_mask(hdmi);
}
mutex_unlock(&hdmi->mutex);
}
EXPORT_SYMBOL_GPL(dw_hdmi_setup_rx_sense);
static irqreturn_t dw_hdmi_irq(int irq, void *dev_id)
{
struct dw_hdmi *hdmi = dev_id;
drm: bridge/dw_hdmi: improve HDMI enable/disable handling HDMI sinks are permitted to de-assert and re-assert the HPD signal to indicate that their EDID has been updated, which may not involve a change of video information. An example of where such a situation can arise is when an AV receiver is connected between the source and the display device. Events which can cause the HPD to be deasserted include: * turning on or switching to standby the AV receiver. * turning on or switching to standby the display device. Each of these can change the entire EDID data, or just a part of the EDID data - it's up to the connected HDMI sink to do what they desire here. For example - with the AV receiver and display device both in standby, a source connected to the AV receiver may provide its own EDID to the source. - turning on the display device causes the display device's EDID to be made available in an unmodified form to the source. - subsequently turning on the AV receiver then provides a modified version of the display device's EDID. Moreover, HPD doesn't tell us whether something is actually listening on the HDMI TDMS signals. The phy gives us a set of RXSENSE indications which tell us whether there is a sink connected to the TMDS signals. Currently, we use the HPD signal to enable or disable the HDMI block, which is questionable when HPD is used in this manner. Using the RXSENSE would be more appropriate, but there is some bad behaviour which needs to be coped with. The iMX6 implementation lets the TMDS signals float when the phy is "powered down", which cause spurious interrupts. Rather than just using RXSENSE, use RXSENSE and HPD becoming both active to signal the presence of a device, but loss of RXSENSE to indicate that the device has been unplugged. The side effect of this change is that a sink deasserting the HPD signal to cause a re-read of the EDID data will not cause the bridge to immediately disable the video signal. Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-06-05 12:46:22 +00:00
u8 intr_stat, phy_int_pol, phy_pol_mask, phy_stat;
intr_stat = hdmi_readb(hdmi, HDMI_IH_PHY_STAT0);
phy_int_pol = hdmi_readb(hdmi, HDMI_PHY_POL0);
drm: bridge/dw_hdmi: improve HDMI enable/disable handling HDMI sinks are permitted to de-assert and re-assert the HPD signal to indicate that their EDID has been updated, which may not involve a change of video information. An example of where such a situation can arise is when an AV receiver is connected between the source and the display device. Events which can cause the HPD to be deasserted include: * turning on or switching to standby the AV receiver. * turning on or switching to standby the display device. Each of these can change the entire EDID data, or just a part of the EDID data - it's up to the connected HDMI sink to do what they desire here. For example - with the AV receiver and display device both in standby, a source connected to the AV receiver may provide its own EDID to the source. - turning on the display device causes the display device's EDID to be made available in an unmodified form to the source. - subsequently turning on the AV receiver then provides a modified version of the display device's EDID. Moreover, HPD doesn't tell us whether something is actually listening on the HDMI TDMS signals. The phy gives us a set of RXSENSE indications which tell us whether there is a sink connected to the TMDS signals. Currently, we use the HPD signal to enable or disable the HDMI block, which is questionable when HPD is used in this manner. Using the RXSENSE would be more appropriate, but there is some bad behaviour which needs to be coped with. The iMX6 implementation lets the TMDS signals float when the phy is "powered down", which cause spurious interrupts. Rather than just using RXSENSE, use RXSENSE and HPD becoming both active to signal the presence of a device, but loss of RXSENSE to indicate that the device has been unplugged. The side effect of this change is that a sink deasserting the HPD signal to cause a re-read of the EDID data will not cause the bridge to immediately disable the video signal. Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-06-05 12:46:22 +00:00
phy_stat = hdmi_readb(hdmi, HDMI_PHY_STAT0);
phy_pol_mask = 0;
if (intr_stat & HDMI_IH_PHY_STAT0_HPD)
phy_pol_mask |= HDMI_PHY_HPD;
if (intr_stat & HDMI_IH_PHY_STAT0_RX_SENSE0)
phy_pol_mask |= HDMI_PHY_RX_SENSE0;
if (intr_stat & HDMI_IH_PHY_STAT0_RX_SENSE1)
phy_pol_mask |= HDMI_PHY_RX_SENSE1;
if (intr_stat & HDMI_IH_PHY_STAT0_RX_SENSE2)
phy_pol_mask |= HDMI_PHY_RX_SENSE2;
if (intr_stat & HDMI_IH_PHY_STAT0_RX_SENSE3)
phy_pol_mask |= HDMI_PHY_RX_SENSE3;
if (phy_pol_mask)
hdmi_modb(hdmi, ~phy_int_pol, phy_pol_mask, HDMI_PHY_POL0);
drm: bridge/dw_hdmi: improve HDMI enable/disable handling HDMI sinks are permitted to de-assert and re-assert the HPD signal to indicate that their EDID has been updated, which may not involve a change of video information. An example of where such a situation can arise is when an AV receiver is connected between the source and the display device. Events which can cause the HPD to be deasserted include: * turning on or switching to standby the AV receiver. * turning on or switching to standby the display device. Each of these can change the entire EDID data, or just a part of the EDID data - it's up to the connected HDMI sink to do what they desire here. For example - with the AV receiver and display device both in standby, a source connected to the AV receiver may provide its own EDID to the source. - turning on the display device causes the display device's EDID to be made available in an unmodified form to the source. - subsequently turning on the AV receiver then provides a modified version of the display device's EDID. Moreover, HPD doesn't tell us whether something is actually listening on the HDMI TDMS signals. The phy gives us a set of RXSENSE indications which tell us whether there is a sink connected to the TMDS signals. Currently, we use the HPD signal to enable or disable the HDMI block, which is questionable when HPD is used in this manner. Using the RXSENSE would be more appropriate, but there is some bad behaviour which needs to be coped with. The iMX6 implementation lets the TMDS signals float when the phy is "powered down", which cause spurious interrupts. Rather than just using RXSENSE, use RXSENSE and HPD becoming both active to signal the presence of a device, but loss of RXSENSE to indicate that the device has been unplugged. The side effect of this change is that a sink deasserting the HPD signal to cause a re-read of the EDID data will not cause the bridge to immediately disable the video signal. Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-06-05 12:46:22 +00:00
/*
* RX sense tells us whether the TDMS transmitters are detecting
* load - in other words, there's something listening on the
* other end of the link. Use this to decide whether we should
* power on the phy as HPD may be toggled by the sink to merely
* ask the source to re-read the EDID.
*/
if (intr_stat &
(HDMI_IH_PHY_STAT0_RX_SENSE | HDMI_IH_PHY_STAT0_HPD)) {
dw_hdmi_setup_rx_sense(hdmi,
phy_stat & HDMI_PHY_HPD,
phy_stat & HDMI_PHY_RX_SENSE);
drm: bridge/dw_hdmi: improve HDMI enable/disable handling HDMI sinks are permitted to de-assert and re-assert the HPD signal to indicate that their EDID has been updated, which may not involve a change of video information. An example of where such a situation can arise is when an AV receiver is connected between the source and the display device. Events which can cause the HPD to be deasserted include: * turning on or switching to standby the AV receiver. * turning on or switching to standby the display device. Each of these can change the entire EDID data, or just a part of the EDID data - it's up to the connected HDMI sink to do what they desire here. For example - with the AV receiver and display device both in standby, a source connected to the AV receiver may provide its own EDID to the source. - turning on the display device causes the display device's EDID to be made available in an unmodified form to the source. - subsequently turning on the AV receiver then provides a modified version of the display device's EDID. Moreover, HPD doesn't tell us whether something is actually listening on the HDMI TDMS signals. The phy gives us a set of RXSENSE indications which tell us whether there is a sink connected to the TMDS signals. Currently, we use the HPD signal to enable or disable the HDMI block, which is questionable when HPD is used in this manner. Using the RXSENSE would be more appropriate, but there is some bad behaviour which needs to be coped with. The iMX6 implementation lets the TMDS signals float when the phy is "powered down", which cause spurious interrupts. Rather than just using RXSENSE, use RXSENSE and HPD becoming both active to signal the presence of a device, but loss of RXSENSE to indicate that the device has been unplugged. The side effect of this change is that a sink deasserting the HPD signal to cause a re-read of the EDID data will not cause the bridge to immediately disable the video signal. Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-06-05 12:46:22 +00:00
if ((phy_stat & (HDMI_PHY_RX_SENSE | HDMI_PHY_HPD)) == 0)
cec_notifier_set_phys_addr(hdmi->cec_notifier,
CEC_PHYS_ADDR_INVALID);
}
drm: bridge/dw_hdmi: improve HDMI enable/disable handling HDMI sinks are permitted to de-assert and re-assert the HPD signal to indicate that their EDID has been updated, which may not involve a change of video information. An example of where such a situation can arise is when an AV receiver is connected between the source and the display device. Events which can cause the HPD to be deasserted include: * turning on or switching to standby the AV receiver. * turning on or switching to standby the display device. Each of these can change the entire EDID data, or just a part of the EDID data - it's up to the connected HDMI sink to do what they desire here. For example - with the AV receiver and display device both in standby, a source connected to the AV receiver may provide its own EDID to the source. - turning on the display device causes the display device's EDID to be made available in an unmodified form to the source. - subsequently turning on the AV receiver then provides a modified version of the display device's EDID. Moreover, HPD doesn't tell us whether something is actually listening on the HDMI TDMS signals. The phy gives us a set of RXSENSE indications which tell us whether there is a sink connected to the TMDS signals. Currently, we use the HPD signal to enable or disable the HDMI block, which is questionable when HPD is used in this manner. Using the RXSENSE would be more appropriate, but there is some bad behaviour which needs to be coped with. The iMX6 implementation lets the TMDS signals float when the phy is "powered down", which cause spurious interrupts. Rather than just using RXSENSE, use RXSENSE and HPD becoming both active to signal the presence of a device, but loss of RXSENSE to indicate that the device has been unplugged. The side effect of this change is that a sink deasserting the HPD signal to cause a re-read of the EDID data will not cause the bridge to immediately disable the video signal. Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-06-05 12:46:22 +00:00
if (intr_stat & HDMI_IH_PHY_STAT0_HPD) {
dev_dbg(hdmi->dev, "EVENT=%s\n",
phy_int_pol & HDMI_PHY_HPD ? "plugin" : "plugout");
if (hdmi->bridge.dev)
drm_helper_hpd_irq_event(hdmi->bridge.dev);
}
hdmi_writeb(hdmi, intr_stat, HDMI_IH_PHY_STAT0);
drm: bridge/dw_hdmi: improve HDMI enable/disable handling HDMI sinks are permitted to de-assert and re-assert the HPD signal to indicate that their EDID has been updated, which may not involve a change of video information. An example of where such a situation can arise is when an AV receiver is connected between the source and the display device. Events which can cause the HPD to be deasserted include: * turning on or switching to standby the AV receiver. * turning on or switching to standby the display device. Each of these can change the entire EDID data, or just a part of the EDID data - it's up to the connected HDMI sink to do what they desire here. For example - with the AV receiver and display device both in standby, a source connected to the AV receiver may provide its own EDID to the source. - turning on the display device causes the display device's EDID to be made available in an unmodified form to the source. - subsequently turning on the AV receiver then provides a modified version of the display device's EDID. Moreover, HPD doesn't tell us whether something is actually listening on the HDMI TDMS signals. The phy gives us a set of RXSENSE indications which tell us whether there is a sink connected to the TMDS signals. Currently, we use the HPD signal to enable or disable the HDMI block, which is questionable when HPD is used in this manner. Using the RXSENSE would be more appropriate, but there is some bad behaviour which needs to be coped with. The iMX6 implementation lets the TMDS signals float when the phy is "powered down", which cause spurious interrupts. Rather than just using RXSENSE, use RXSENSE and HPD becoming both active to signal the presence of a device, but loss of RXSENSE to indicate that the device has been unplugged. The side effect of this change is that a sink deasserting the HPD signal to cause a re-read of the EDID data will not cause the bridge to immediately disable the video signal. Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-06-05 12:46:22 +00:00
hdmi_writeb(hdmi, ~(HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE),
HDMI_IH_MUTE_PHY_STAT0);
return IRQ_HANDLED;
}
static const struct dw_hdmi_phy_data dw_hdmi_phys[] = {
{
.type = DW_HDMI_PHY_DWC_HDMI_TX_PHY,
.name = "DWC HDMI TX PHY",
.gen = 1,
}, {
.type = DW_HDMI_PHY_DWC_MHL_PHY_HEAC,
.name = "DWC MHL PHY + HEAC PHY",
.gen = 2,
.has_svsret = true,
.configure = hdmi_phy_configure_dwc_hdmi_3d_tx,
}, {
.type = DW_HDMI_PHY_DWC_MHL_PHY,
.name = "DWC MHL PHY",
.gen = 2,
.has_svsret = true,
.configure = hdmi_phy_configure_dwc_hdmi_3d_tx,
}, {
.type = DW_HDMI_PHY_DWC_HDMI_3D_TX_PHY_HEAC,
.name = "DWC HDMI 3D TX PHY + HEAC PHY",
.gen = 2,
.configure = hdmi_phy_configure_dwc_hdmi_3d_tx,
}, {
.type = DW_HDMI_PHY_DWC_HDMI_3D_TX_PHY,
.name = "DWC HDMI 3D TX PHY",
.gen = 2,
.configure = hdmi_phy_configure_dwc_hdmi_3d_tx,
}, {
.type = DW_HDMI_PHY_DWC_HDMI20_TX_PHY,
.name = "DWC HDMI 2.0 TX PHY",
.gen = 2,
.has_svsret = true,
.configure = hdmi_phy_configure_dwc_hdmi_3d_tx,
}, {
.type = DW_HDMI_PHY_VENDOR_PHY,
.name = "Vendor PHY",
}
};
static int dw_hdmi_detect_phy(struct dw_hdmi *hdmi)
{
unsigned int i;
u8 phy_type;
phy_type = hdmi_readb(hdmi, HDMI_CONFIG2_ID);
if (phy_type == DW_HDMI_PHY_VENDOR_PHY) {
/* Vendor PHYs require support from the glue layer. */
if (!hdmi->plat_data->phy_ops || !hdmi->plat_data->phy_name) {
dev_err(hdmi->dev,
"Vendor HDMI PHY not supported by glue layer\n");
return -ENODEV;
}
hdmi->phy.ops = hdmi->plat_data->phy_ops;
hdmi->phy.data = hdmi->plat_data->phy_data;
hdmi->phy.name = hdmi->plat_data->phy_name;
return 0;
}
/* Synopsys PHYs are handled internally. */
for (i = 0; i < ARRAY_SIZE(dw_hdmi_phys); ++i) {
if (dw_hdmi_phys[i].type == phy_type) {
hdmi->phy.ops = &dw_hdmi_synopsys_phy_ops;
hdmi->phy.name = dw_hdmi_phys[i].name;
hdmi->phy.data = (void *)&dw_hdmi_phys[i];
if (!dw_hdmi_phys[i].configure &&
!hdmi->plat_data->configure_phy) {
dev_err(hdmi->dev, "%s requires platform support\n",
hdmi->phy.name);
return -ENODEV;
}
return 0;
}
}
dev_err(hdmi->dev, "Unsupported HDMI PHY type (%02x)\n", phy_type);
return -ENODEV;
}
static void dw_hdmi_cec_enable(struct dw_hdmi *hdmi)
{
mutex_lock(&hdmi->mutex);
hdmi->mc_clkdis &= ~HDMI_MC_CLKDIS_CECCLK_DISABLE;
hdmi_writeb(hdmi, hdmi->mc_clkdis, HDMI_MC_CLKDIS);
mutex_unlock(&hdmi->mutex);
}
static void dw_hdmi_cec_disable(struct dw_hdmi *hdmi)
{
mutex_lock(&hdmi->mutex);
hdmi->mc_clkdis |= HDMI_MC_CLKDIS_CECCLK_DISABLE;
hdmi_writeb(hdmi, hdmi->mc_clkdis, HDMI_MC_CLKDIS);
mutex_unlock(&hdmi->mutex);
}
static const struct dw_hdmi_cec_ops dw_hdmi_cec_ops = {
.write = hdmi_writeb,
.read = hdmi_readb,
.enable = dw_hdmi_cec_enable,
.disable = dw_hdmi_cec_disable,
};
static const struct regmap_config hdmi_regmap_8bit_config = {
.reg_bits = 32,
.val_bits = 8,
.reg_stride = 1,
.max_register = HDMI_I2CM_FS_SCL_LCNT_0_ADDR,
};
static const struct regmap_config hdmi_regmap_32bit_config = {
.reg_bits = 32,
.val_bits = 32,
.reg_stride = 4,
.max_register = HDMI_I2CM_FS_SCL_LCNT_0_ADDR << 2,
};
static struct dw_hdmi *
__dw_hdmi_probe(struct platform_device *pdev,
const struct dw_hdmi_plat_data *plat_data)
{
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
struct platform_device_info pdevinfo;
struct device_node *ddc_node;
struct dw_hdmi_cec_data cec;
struct dw_hdmi *hdmi;
struct resource *iores = NULL;
int irq;
int ret;
u32 val = 1;
u8 prod_id0;
u8 prod_id1;
u8 config0;
u8 config3;
hdmi = devm_kzalloc(dev, sizeof(*hdmi), GFP_KERNEL);
if (!hdmi)
return ERR_PTR(-ENOMEM);
hdmi->plat_data = plat_data;
hdmi->dev = dev;
hdmi->sample_rate = 48000;
hdmi->disabled = true;
drm: bridge/dw_hdmi: improve HDMI enable/disable handling HDMI sinks are permitted to de-assert and re-assert the HPD signal to indicate that their EDID has been updated, which may not involve a change of video information. An example of where such a situation can arise is when an AV receiver is connected between the source and the display device. Events which can cause the HPD to be deasserted include: * turning on or switching to standby the AV receiver. * turning on or switching to standby the display device. Each of these can change the entire EDID data, or just a part of the EDID data - it's up to the connected HDMI sink to do what they desire here. For example - with the AV receiver and display device both in standby, a source connected to the AV receiver may provide its own EDID to the source. - turning on the display device causes the display device's EDID to be made available in an unmodified form to the source. - subsequently turning on the AV receiver then provides a modified version of the display device's EDID. Moreover, HPD doesn't tell us whether something is actually listening on the HDMI TDMS signals. The phy gives us a set of RXSENSE indications which tell us whether there is a sink connected to the TMDS signals. Currently, we use the HPD signal to enable or disable the HDMI block, which is questionable when HPD is used in this manner. Using the RXSENSE would be more appropriate, but there is some bad behaviour which needs to be coped with. The iMX6 implementation lets the TMDS signals float when the phy is "powered down", which cause spurious interrupts. Rather than just using RXSENSE, use RXSENSE and HPD becoming both active to signal the presence of a device, but loss of RXSENSE to indicate that the device has been unplugged. The side effect of this change is that a sink deasserting the HPD signal to cause a re-read of the EDID data will not cause the bridge to immediately disable the video signal. Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-06-05 12:46:22 +00:00
hdmi->rxsense = true;
hdmi->phy_mask = (u8)~(HDMI_PHY_HPD | HDMI_PHY_RX_SENSE);
hdmi->mc_clkdis = 0x7f;
mutex_init(&hdmi->mutex);
mutex_init(&hdmi->audio_mutex);
spin_lock_init(&hdmi->audio_lock);
ddc_node = of_parse_phandle(np, "ddc-i2c-bus", 0);
if (ddc_node) {
hdmi->ddc = of_get_i2c_adapter_by_node(ddc_node);
of_node_put(ddc_node);
if (!hdmi->ddc) {
dev_dbg(hdmi->dev, "failed to read ddc node\n");
return ERR_PTR(-EPROBE_DEFER);
}
} else {
dev_dbg(hdmi->dev, "no ddc property found\n");
}
if (!plat_data->regm) {
const struct regmap_config *reg_config;
of_property_read_u32(np, "reg-io-width", &val);
switch (val) {
case 4:
reg_config = &hdmi_regmap_32bit_config;
hdmi->reg_shift = 2;
break;
case 1:
reg_config = &hdmi_regmap_8bit_config;
break;
default:
dev_err(dev, "reg-io-width must be 1 or 4\n");
return ERR_PTR(-EINVAL);
}
iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
hdmi->regs = devm_ioremap_resource(dev, iores);
if (IS_ERR(hdmi->regs)) {
ret = PTR_ERR(hdmi->regs);
goto err_res;
}
hdmi->regm = devm_regmap_init_mmio(dev, hdmi->regs, reg_config);
if (IS_ERR(hdmi->regm)) {
dev_err(dev, "Failed to configure regmap\n");
ret = PTR_ERR(hdmi->regm);
goto err_res;
}
} else {
hdmi->regm = plat_data->regm;
}
hdmi->isfr_clk = devm_clk_get(hdmi->dev, "isfr");
if (IS_ERR(hdmi->isfr_clk)) {
ret = PTR_ERR(hdmi->isfr_clk);
dev_err(hdmi->dev, "Unable to get HDMI isfr clk: %d\n", ret);
goto err_res;
}
ret = clk_prepare_enable(hdmi->isfr_clk);
if (ret) {
dev_err(hdmi->dev, "Cannot enable HDMI isfr clock: %d\n", ret);
goto err_res;
}
hdmi->iahb_clk = devm_clk_get(hdmi->dev, "iahb");
if (IS_ERR(hdmi->iahb_clk)) {
ret = PTR_ERR(hdmi->iahb_clk);
dev_err(hdmi->dev, "Unable to get HDMI iahb clk: %d\n", ret);
goto err_isfr;
}
ret = clk_prepare_enable(hdmi->iahb_clk);
if (ret) {
dev_err(hdmi->dev, "Cannot enable HDMI iahb clock: %d\n", ret);
goto err_isfr;
}
hdmi->cec_clk = devm_clk_get(hdmi->dev, "cec");
if (PTR_ERR(hdmi->cec_clk) == -ENOENT) {
hdmi->cec_clk = NULL;
} else if (IS_ERR(hdmi->cec_clk)) {
ret = PTR_ERR(hdmi->cec_clk);
if (ret != -EPROBE_DEFER)
dev_err(hdmi->dev, "Cannot get HDMI cec clock: %d\n",
ret);
hdmi->cec_clk = NULL;
goto err_iahb;
} else {
ret = clk_prepare_enable(hdmi->cec_clk);
if (ret) {
dev_err(hdmi->dev, "Cannot enable HDMI cec clock: %d\n",
ret);
goto err_iahb;
}
}
/* Product and revision IDs */
hdmi->version = (hdmi_readb(hdmi, HDMI_DESIGN_ID) << 8)
| (hdmi_readb(hdmi, HDMI_REVISION_ID) << 0);
prod_id0 = hdmi_readb(hdmi, HDMI_PRODUCT_ID0);
prod_id1 = hdmi_readb(hdmi, HDMI_PRODUCT_ID1);
if (prod_id0 != HDMI_PRODUCT_ID0_HDMI_TX ||
(prod_id1 & ~HDMI_PRODUCT_ID1_HDCP) != HDMI_PRODUCT_ID1_HDMI_TX) {
dev_err(dev, "Unsupported HDMI controller (%04x:%02x:%02x)\n",
hdmi->version, prod_id0, prod_id1);
ret = -ENODEV;
goto err_iahb;
}
ret = dw_hdmi_detect_phy(hdmi);
if (ret < 0)
goto err_iahb;
dev_info(dev, "Detected HDMI TX controller v%x.%03x %s HDCP (%s)\n",
hdmi->version >> 12, hdmi->version & 0xfff,
prod_id1 & HDMI_PRODUCT_ID1_HDCP ? "with" : "without",
hdmi->phy.name);
initialize_hdmi_ih_mutes(hdmi);
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
ret = irq;
goto err_iahb;
}
ret = devm_request_threaded_irq(dev, irq, dw_hdmi_hardirq,
dw_hdmi_irq, IRQF_SHARED,
dev_name(dev), hdmi);
if (ret)
goto err_iahb;
hdmi->cec_notifier = cec_notifier_get(dev);
if (!hdmi->cec_notifier) {
ret = -ENOMEM;
goto err_iahb;
}
/*
* To prevent overflows in HDMI_IH_FC_STAT2, set the clk regenerator
* N and cts values before enabling phy
*/
hdmi_init_clk_regenerator(hdmi);
/* If DDC bus is not specified, try to register HDMI I2C bus */
if (!hdmi->ddc) {
hdmi->ddc = dw_hdmi_i2c_adapter(hdmi);
if (IS_ERR(hdmi->ddc))
hdmi->ddc = NULL;
}
hdmi->bridge.driver_private = hdmi;
hdmi->bridge.funcs = &dw_hdmi_bridge_funcs;
#ifdef CONFIG_OF
hdmi->bridge.of_node = pdev->dev.of_node;
#endif
dw_hdmi_setup_i2c(hdmi);
if (hdmi->phy.ops->setup_hpd)
hdmi->phy.ops->setup_hpd(hdmi, hdmi->phy.data);
memset(&pdevinfo, 0, sizeof(pdevinfo));
pdevinfo.parent = dev;
pdevinfo.id = PLATFORM_DEVID_AUTO;
config0 = hdmi_readb(hdmi, HDMI_CONFIG0_ID);
config3 = hdmi_readb(hdmi, HDMI_CONFIG3_ID);
if (iores && config3 & HDMI_CONFIG3_AHBAUDDMA) {
struct dw_hdmi_audio_data audio;
audio.phys = iores->start;
audio.base = hdmi->regs;
audio.irq = irq;
audio.hdmi = hdmi;
audio.eld = hdmi->connector.eld;
hdmi->enable_audio = dw_hdmi_ahb_audio_enable;
hdmi->disable_audio = dw_hdmi_ahb_audio_disable;
pdevinfo.name = "dw-hdmi-ahb-audio";
pdevinfo.data = &audio;
pdevinfo.size_data = sizeof(audio);
pdevinfo.dma_mask = DMA_BIT_MASK(32);
hdmi->audio = platform_device_register_full(&pdevinfo);
} else if (config0 & HDMI_CONFIG0_I2S) {
struct dw_hdmi_i2s_audio_data audio;
audio.hdmi = hdmi;
audio.write = hdmi_writeb;
audio.read = hdmi_readb;
hdmi->enable_audio = dw_hdmi_i2s_audio_enable;
hdmi->disable_audio = dw_hdmi_i2s_audio_disable;
pdevinfo.name = "dw-hdmi-i2s-audio";
pdevinfo.data = &audio;
pdevinfo.size_data = sizeof(audio);
pdevinfo.dma_mask = DMA_BIT_MASK(32);
hdmi->audio = platform_device_register_full(&pdevinfo);
}
if (config0 & HDMI_CONFIG0_CEC) {
cec.hdmi = hdmi;
cec.ops = &dw_hdmi_cec_ops;
cec.irq = irq;
pdevinfo.name = "dw-hdmi-cec";
pdevinfo.data = &cec;
pdevinfo.size_data = sizeof(cec);
pdevinfo.dma_mask = 0;
hdmi->cec = platform_device_register_full(&pdevinfo);
}
/* Reset HDMI DDC I2C master controller and mute I2CM interrupts */
if (hdmi->i2c)
dw_hdmi_i2c_init(hdmi);
return hdmi;
err_iahb:
if (hdmi->i2c) {
i2c_del_adapter(&hdmi->i2c->adap);
hdmi->ddc = NULL;
}
if (hdmi->cec_notifier)
cec_notifier_put(hdmi->cec_notifier);
clk_disable_unprepare(hdmi->iahb_clk);
if (hdmi->cec_clk)
clk_disable_unprepare(hdmi->cec_clk);
err_isfr:
clk_disable_unprepare(hdmi->isfr_clk);
err_res:
i2c_put_adapter(hdmi->ddc);
return ERR_PTR(ret);
}
static void __dw_hdmi_remove(struct dw_hdmi *hdmi)
{
if (hdmi->audio && !IS_ERR(hdmi->audio))
platform_device_unregister(hdmi->audio);
if (!IS_ERR(hdmi->cec))
platform_device_unregister(hdmi->cec);
/* Disable all interrupts */
hdmi_writeb(hdmi, ~0, HDMI_IH_MUTE_PHY_STAT0);
if (hdmi->cec_notifier)
cec_notifier_put(hdmi->cec_notifier);
clk_disable_unprepare(hdmi->iahb_clk);
clk_disable_unprepare(hdmi->isfr_clk);
if (hdmi->cec_clk)
clk_disable_unprepare(hdmi->cec_clk);
if (hdmi->i2c)
i2c_del_adapter(&hdmi->i2c->adap);
else
i2c_put_adapter(hdmi->ddc);
}
/* -----------------------------------------------------------------------------
* Probe/remove API, used from platforms based on the DRM bridge API.
*/
struct dw_hdmi *dw_hdmi_probe(struct platform_device *pdev,
const struct dw_hdmi_plat_data *plat_data)
{
struct dw_hdmi *hdmi;
hdmi = __dw_hdmi_probe(pdev, plat_data);
if (IS_ERR(hdmi))
return hdmi;
drm_bridge_add(&hdmi->bridge);
return hdmi;
}
EXPORT_SYMBOL_GPL(dw_hdmi_probe);
void dw_hdmi_remove(struct dw_hdmi *hdmi)
{
drm_bridge_remove(&hdmi->bridge);
__dw_hdmi_remove(hdmi);
}
EXPORT_SYMBOL_GPL(dw_hdmi_remove);
/* -----------------------------------------------------------------------------
* Bind/unbind API, used from platforms based on the component framework.
*/
struct dw_hdmi *dw_hdmi_bind(struct platform_device *pdev,
struct drm_encoder *encoder,
const struct dw_hdmi_plat_data *plat_data)
{
struct dw_hdmi *hdmi;
int ret;
hdmi = __dw_hdmi_probe(pdev, plat_data);
if (IS_ERR(hdmi))
return hdmi;
ret = drm_bridge_attach(encoder, &hdmi->bridge, NULL);
if (ret) {
dw_hdmi_remove(hdmi);
DRM_ERROR("Failed to initialize bridge with drm\n");
return ERR_PTR(ret);
}
return hdmi;
}
EXPORT_SYMBOL_GPL(dw_hdmi_bind);
void dw_hdmi_unbind(struct dw_hdmi *hdmi)
{
__dw_hdmi_remove(hdmi);
}
EXPORT_SYMBOL_GPL(dw_hdmi_unbind);
MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
MODULE_AUTHOR("Andy Yan <andy.yan@rock-chips.com>");
MODULE_AUTHOR("Yakir Yang <ykk@rock-chips.com>");
MODULE_AUTHOR("Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>");
MODULE_DESCRIPTION("DW HDMI transmitter driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:dw-hdmi");