linux-stable/arch/arc/mm/init.c

207 lines
5.2 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
*/
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/memblock.h>
#ifdef CONFIG_BLK_DEV_INITRD
#include <linux/initrd.h>
#endif
#include <linux/of_fdt.h>
#include <linux/swap.h>
#include <linux/module.h>
#include <linux/highmem.h>
#include <asm/page.h>
#include <asm/sections.h>
#include <asm/arcregs.h>
pgd_t swapper_pg_dir[PTRS_PER_PGD] __aligned(PAGE_SIZE);
char empty_zero_page[PAGE_SIZE] __aligned(PAGE_SIZE);
EXPORT_SYMBOL(empty_zero_page);
static const unsigned long low_mem_start = CONFIG_LINUX_RAM_BASE;
static unsigned long low_mem_sz;
#ifdef CONFIG_HIGHMEM
static unsigned long min_high_pfn, max_high_pfn;
static phys_addr_t high_mem_start;
static phys_addr_t high_mem_sz;
arc: use FLATMEM with freeing of unused memory map instead of DISCONTIGMEM Currently ARC uses DISCONTIGMEM to cope with sparse physical memory address space on systems with 2 memory banks. While DISCONTIGMEM avoids wasting memory on unpopulated memory map, it adds both memory and CPU overhead relatively to FLATMEM. Moreover, DISCONTINGMEM is generally considered deprecated. The obvious replacement for DISCONTIGMEM would be SPARSEMEM, but it is also less efficient than FLATMEM in pfn_to_page() and page_to_pfn() conversions. Besides it requires tuning of SECTION_SIZE which is not trivial for possible ARC memory configuration. Since the memory map for both banks is always allocated from the "lowmem" bank, it is possible to use FLATMEM for two-bank configuration and simply free the unused hole in the memory map. All is required for that is to provide ARC-specific pfn_valid() that will take into account actual physical memory configuration and define HAVE_ARCH_PFN_VALID. The resulting kernel image configured with defconfig + HIGHMEM=y is smaller: $ size a/vmlinux b/vmlinux text data bss dec hex filename 4673503 1245456 279756 6198715 5e95bb a/vmlinux 4658706 1246864 279756 6185326 5e616e b/vmlinux $ ./scripts/bloat-o-meter a/vmlinux b/vmlinux add/remove: 28/30 grow/shrink: 42/399 up/down: 10986/-29025 (-18039) ... Total: Before=4709315, After = 4691276, chg -0.38% Booting nSIM with haps_ns.dts results in the following memory usage reports: a: Memory: 1559104K/1572864K available (3531K kernel code, 595K rwdata, 752K rodata, 136K init, 275K bss, 13760K reserved, 0K cma-reserved, 1048576K highmem) b: Memory: 1559112K/1572864K available (3519K kernel code, 594K rwdata, 752K rodata, 136K init, 280K bss, 13752K reserved, 0K cma-reserved, 1048576K highmem) Link: https://lkml.kernel.org/r/20201101170454.9567-11-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Meelis Roos <mroos@linux.ee> Cc: Michael Schmitz <schmitzmic@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 03:10:04 +00:00
unsigned long arch_pfn_offset;
EXPORT_SYMBOL(arch_pfn_offset);
#endif
#ifdef CONFIG_DISCONTIGMEM
struct pglist_data node_data[MAX_NUMNODES] __read_mostly;
EXPORT_SYMBOL(node_data);
#endif
long __init arc_get_mem_sz(void)
{
return low_mem_sz;
}
/* User can over-ride above with "mem=nnn[KkMm]" in cmdline */
static int __init setup_mem_sz(char *str)
{
low_mem_sz = memparse(str, NULL) & PAGE_MASK;
/* early console might not be setup yet - it will show up later */
pr_info("\"mem=%s\": mem sz set to %ldM\n", str, TO_MB(low_mem_sz));
return 0;
}
early_param("mem", setup_mem_sz);
void __init early_init_dt_add_memory_arch(u64 base, u64 size)
{
int in_use = 0;
if (!low_mem_sz) {
if (base != low_mem_start)
panic("CONFIG_LINUX_RAM_BASE != DT memory { }");
low_mem_sz = size;
in_use = 1;
mm: free_area_init: allow defining max_zone_pfn in descending order Some architectures (e.g. ARC) have the ZONE_HIGHMEM zone below the ZONE_NORMAL. Allowing free_area_init() parse max_zone_pfn array even it is sorted in descending order allows using free_area_init() on such architectures. Add top -> down traversal of max_zone_pfn array in free_area_init() and use the latter in ARC node/zone initialization. [rppt@kernel.org: ARC fix] Link: http://lkml.kernel.org/r/20200504153901.GM14260@kernel.org [rppt@linux.ibm.com: arc: free_area_init(): take into account PAE40 mode] Link: http://lkml.kernel.org/r/20200507205900.GH683243@linux.ibm.com [akpm@linux-foundation.org: declare arch_has_descending_max_zone_pfns()] Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Hoan Tran <hoan@os.amperecomputing.com> [arm64] Reviewed-by: Baoquan He <bhe@redhat.com> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Guenter Roeck <linux@roeck-us.net> Link: http://lkml.kernel.org/r/20200412194859.12663-18-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 22:58:03 +00:00
memblock_add_node(base, size, 0);
} else {
#ifdef CONFIG_HIGHMEM
high_mem_start = base;
high_mem_sz = size;
in_use = 1;
mm: free_area_init: allow defining max_zone_pfn in descending order Some architectures (e.g. ARC) have the ZONE_HIGHMEM zone below the ZONE_NORMAL. Allowing free_area_init() parse max_zone_pfn array even it is sorted in descending order allows using free_area_init() on such architectures. Add top -> down traversal of max_zone_pfn array in free_area_init() and use the latter in ARC node/zone initialization. [rppt@kernel.org: ARC fix] Link: http://lkml.kernel.org/r/20200504153901.GM14260@kernel.org [rppt@linux.ibm.com: arc: free_area_init(): take into account PAE40 mode] Link: http://lkml.kernel.org/r/20200507205900.GH683243@linux.ibm.com [akpm@linux-foundation.org: declare arch_has_descending_max_zone_pfns()] Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Hoan Tran <hoan@os.amperecomputing.com> [arm64] Reviewed-by: Baoquan He <bhe@redhat.com> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Guenter Roeck <linux@roeck-us.net> Link: http://lkml.kernel.org/r/20200412194859.12663-18-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 22:58:03 +00:00
memblock_add_node(base, size, 1);
memblock_reserve(base, size);
#endif
}
pr_info("Memory @ %llx [%lldM] %s\n",
base, TO_MB(size), !in_use ? "Not used":"");
}
mm: free_area_init: allow defining max_zone_pfn in descending order Some architectures (e.g. ARC) have the ZONE_HIGHMEM zone below the ZONE_NORMAL. Allowing free_area_init() parse max_zone_pfn array even it is sorted in descending order allows using free_area_init() on such architectures. Add top -> down traversal of max_zone_pfn array in free_area_init() and use the latter in ARC node/zone initialization. [rppt@kernel.org: ARC fix] Link: http://lkml.kernel.org/r/20200504153901.GM14260@kernel.org [rppt@linux.ibm.com: arc: free_area_init(): take into account PAE40 mode] Link: http://lkml.kernel.org/r/20200507205900.GH683243@linux.ibm.com [akpm@linux-foundation.org: declare arch_has_descending_max_zone_pfns()] Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Hoan Tran <hoan@os.amperecomputing.com> [arm64] Reviewed-by: Baoquan He <bhe@redhat.com> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Guenter Roeck <linux@roeck-us.net> Link: http://lkml.kernel.org/r/20200412194859.12663-18-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 22:58:03 +00:00
bool arch_has_descending_max_zone_pfns(void)
{
return !IS_ENABLED(CONFIG_ARC_HAS_PAE40);
}
/*
* First memory setup routine called from setup_arch()
* 1. setup swapper's mm @init_mm
* 2. Count the pages we have and setup bootmem allocator
* 3. zone setup
*/
void __init setup_arch_memory(void)
{
mm: free_area_init: allow defining max_zone_pfn in descending order Some architectures (e.g. ARC) have the ZONE_HIGHMEM zone below the ZONE_NORMAL. Allowing free_area_init() parse max_zone_pfn array even it is sorted in descending order allows using free_area_init() on such architectures. Add top -> down traversal of max_zone_pfn array in free_area_init() and use the latter in ARC node/zone initialization. [rppt@kernel.org: ARC fix] Link: http://lkml.kernel.org/r/20200504153901.GM14260@kernel.org [rppt@linux.ibm.com: arc: free_area_init(): take into account PAE40 mode] Link: http://lkml.kernel.org/r/20200507205900.GH683243@linux.ibm.com [akpm@linux-foundation.org: declare arch_has_descending_max_zone_pfns()] Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Hoan Tran <hoan@os.amperecomputing.com> [arm64] Reviewed-by: Baoquan He <bhe@redhat.com> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Guenter Roeck <linux@roeck-us.net> Link: http://lkml.kernel.org/r/20200412194859.12663-18-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 22:58:03 +00:00
unsigned long max_zone_pfn[MAX_NR_ZONES] = { 0 };
init_mm.start_code = (unsigned long)_text;
init_mm.end_code = (unsigned long)_etext;
init_mm.end_data = (unsigned long)_edata;
init_mm.brk = (unsigned long)_end;
/* first page of system - kernel .vector starts here */
arc: use FLATMEM with freeing of unused memory map instead of DISCONTIGMEM Currently ARC uses DISCONTIGMEM to cope with sparse physical memory address space on systems with 2 memory banks. While DISCONTIGMEM avoids wasting memory on unpopulated memory map, it adds both memory and CPU overhead relatively to FLATMEM. Moreover, DISCONTINGMEM is generally considered deprecated. The obvious replacement for DISCONTIGMEM would be SPARSEMEM, but it is also less efficient than FLATMEM in pfn_to_page() and page_to_pfn() conversions. Besides it requires tuning of SECTION_SIZE which is not trivial for possible ARC memory configuration. Since the memory map for both banks is always allocated from the "lowmem" bank, it is possible to use FLATMEM for two-bank configuration and simply free the unused hole in the memory map. All is required for that is to provide ARC-specific pfn_valid() that will take into account actual physical memory configuration and define HAVE_ARCH_PFN_VALID. The resulting kernel image configured with defconfig + HIGHMEM=y is smaller: $ size a/vmlinux b/vmlinux text data bss dec hex filename 4673503 1245456 279756 6198715 5e95bb a/vmlinux 4658706 1246864 279756 6185326 5e616e b/vmlinux $ ./scripts/bloat-o-meter a/vmlinux b/vmlinux add/remove: 28/30 grow/shrink: 42/399 up/down: 10986/-29025 (-18039) ... Total: Before=4709315, After = 4691276, chg -0.38% Booting nSIM with haps_ns.dts results in the following memory usage reports: a: Memory: 1559104K/1572864K available (3531K kernel code, 595K rwdata, 752K rodata, 136K init, 275K bss, 13760K reserved, 0K cma-reserved, 1048576K highmem) b: Memory: 1559112K/1572864K available (3519K kernel code, 594K rwdata, 752K rodata, 136K init, 280K bss, 13752K reserved, 0K cma-reserved, 1048576K highmem) Link: https://lkml.kernel.org/r/20201101170454.9567-11-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Meelis Roos <mroos@linux.ee> Cc: Michael Schmitz <schmitzmic@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 03:10:04 +00:00
min_low_pfn = virt_to_pfn(CONFIG_LINUX_RAM_BASE);
/* Last usable page of low mem */
max_low_pfn = max_pfn = PFN_DOWN(low_mem_start + low_mem_sz);
/*------------- bootmem allocator setup -----------------------*/
/*
* seed the bootmem allocator after any DT memory node parsing or
* "mem=xxx" cmdline overrides have potentially updated @arc_mem_sz
*
* Only low mem is added, otherwise we have crashes when allocating
* mem_map[] itself. NO_BOOTMEM allocates mem_map[] at the end of
* avail memory, ending in highmem with a > 32-bit address. However
* it then tries to memset it with a truncaed 32-bit handle, causing
* the crash
*/
memblock_reserve(CONFIG_LINUX_LINK_BASE,
__pa(_end) - CONFIG_LINUX_LINK_BASE);
#ifdef CONFIG_BLK_DEV_INITRD
if (phys_initrd_size) {
memblock_reserve(phys_initrd_start, phys_initrd_size);
initrd_start = (unsigned long)__va(phys_initrd_start);
initrd_end = initrd_start + phys_initrd_size;
}
#endif
early_init_fdt_reserve_self();
early_init_fdt_scan_reserved_mem();
memblock_dump_all();
/*----------------- node/zones setup --------------------------*/
mm: free_area_init: allow defining max_zone_pfn in descending order Some architectures (e.g. ARC) have the ZONE_HIGHMEM zone below the ZONE_NORMAL. Allowing free_area_init() parse max_zone_pfn array even it is sorted in descending order allows using free_area_init() on such architectures. Add top -> down traversal of max_zone_pfn array in free_area_init() and use the latter in ARC node/zone initialization. [rppt@kernel.org: ARC fix] Link: http://lkml.kernel.org/r/20200504153901.GM14260@kernel.org [rppt@linux.ibm.com: arc: free_area_init(): take into account PAE40 mode] Link: http://lkml.kernel.org/r/20200507205900.GH683243@linux.ibm.com [akpm@linux-foundation.org: declare arch_has_descending_max_zone_pfns()] Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Hoan Tran <hoan@os.amperecomputing.com> [arm64] Reviewed-by: Baoquan He <bhe@redhat.com> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Guenter Roeck <linux@roeck-us.net> Link: http://lkml.kernel.org/r/20200412194859.12663-18-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 22:58:03 +00:00
max_zone_pfn[ZONE_NORMAL] = max_low_pfn;
#ifdef CONFIG_HIGHMEM
/*
* Populate a new node with highmem
*
* On ARC (w/o PAE) HIGHMEM addresses are actually smaller (0 based)
* than addresses in normal ala low memory (0x8000_0000 based).
* Even with PAE, the huge peripheral space hole would waste a lot of
* mem with single mem_map[]. This warrants a mem_map per region design.
* Thus HIGHMEM on ARC is imlemented with DISCONTIGMEM.
*
* DISCONTIGMEM in turns requires multiple nodes. node 0 above is
* populated with normal memory zone while node 1 only has highmem
*/
arc: use FLATMEM with freeing of unused memory map instead of DISCONTIGMEM Currently ARC uses DISCONTIGMEM to cope with sparse physical memory address space on systems with 2 memory banks. While DISCONTIGMEM avoids wasting memory on unpopulated memory map, it adds both memory and CPU overhead relatively to FLATMEM. Moreover, DISCONTINGMEM is generally considered deprecated. The obvious replacement for DISCONTIGMEM would be SPARSEMEM, but it is also less efficient than FLATMEM in pfn_to_page() and page_to_pfn() conversions. Besides it requires tuning of SECTION_SIZE which is not trivial for possible ARC memory configuration. Since the memory map for both banks is always allocated from the "lowmem" bank, it is possible to use FLATMEM for two-bank configuration and simply free the unused hole in the memory map. All is required for that is to provide ARC-specific pfn_valid() that will take into account actual physical memory configuration and define HAVE_ARCH_PFN_VALID. The resulting kernel image configured with defconfig + HIGHMEM=y is smaller: $ size a/vmlinux b/vmlinux text data bss dec hex filename 4673503 1245456 279756 6198715 5e95bb a/vmlinux 4658706 1246864 279756 6185326 5e616e b/vmlinux $ ./scripts/bloat-o-meter a/vmlinux b/vmlinux add/remove: 28/30 grow/shrink: 42/399 up/down: 10986/-29025 (-18039) ... Total: Before=4709315, After = 4691276, chg -0.38% Booting nSIM with haps_ns.dts results in the following memory usage reports: a: Memory: 1559104K/1572864K available (3531K kernel code, 595K rwdata, 752K rodata, 136K init, 275K bss, 13760K reserved, 0K cma-reserved, 1048576K highmem) b: Memory: 1559112K/1572864K available (3519K kernel code, 594K rwdata, 752K rodata, 136K init, 280K bss, 13752K reserved, 0K cma-reserved, 1048576K highmem) Link: https://lkml.kernel.org/r/20201101170454.9567-11-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Meelis Roos <mroos@linux.ee> Cc: Michael Schmitz <schmitzmic@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 03:10:04 +00:00
#ifdef CONFIG_DISCONTIGMEM
node_set_online(1);
arc: use FLATMEM with freeing of unused memory map instead of DISCONTIGMEM Currently ARC uses DISCONTIGMEM to cope with sparse physical memory address space on systems with 2 memory banks. While DISCONTIGMEM avoids wasting memory on unpopulated memory map, it adds both memory and CPU overhead relatively to FLATMEM. Moreover, DISCONTINGMEM is generally considered deprecated. The obvious replacement for DISCONTIGMEM would be SPARSEMEM, but it is also less efficient than FLATMEM in pfn_to_page() and page_to_pfn() conversions. Besides it requires tuning of SECTION_SIZE which is not trivial for possible ARC memory configuration. Since the memory map for both banks is always allocated from the "lowmem" bank, it is possible to use FLATMEM for two-bank configuration and simply free the unused hole in the memory map. All is required for that is to provide ARC-specific pfn_valid() that will take into account actual physical memory configuration and define HAVE_ARCH_PFN_VALID. The resulting kernel image configured with defconfig + HIGHMEM=y is smaller: $ size a/vmlinux b/vmlinux text data bss dec hex filename 4673503 1245456 279756 6198715 5e95bb a/vmlinux 4658706 1246864 279756 6185326 5e616e b/vmlinux $ ./scripts/bloat-o-meter a/vmlinux b/vmlinux add/remove: 28/30 grow/shrink: 42/399 up/down: 10986/-29025 (-18039) ... Total: Before=4709315, After = 4691276, chg -0.38% Booting nSIM with haps_ns.dts results in the following memory usage reports: a: Memory: 1559104K/1572864K available (3531K kernel code, 595K rwdata, 752K rodata, 136K init, 275K bss, 13760K reserved, 0K cma-reserved, 1048576K highmem) b: Memory: 1559112K/1572864K available (3519K kernel code, 594K rwdata, 752K rodata, 136K init, 280K bss, 13752K reserved, 0K cma-reserved, 1048576K highmem) Link: https://lkml.kernel.org/r/20201101170454.9567-11-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Meelis Roos <mroos@linux.ee> Cc: Michael Schmitz <schmitzmic@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 03:10:04 +00:00
#endif
min_high_pfn = PFN_DOWN(high_mem_start);
max_high_pfn = PFN_DOWN(high_mem_start + high_mem_sz);
max_zone_pfn[ZONE_HIGHMEM] = min_low_pfn;
high_memory = (void *)(min_high_pfn << PAGE_SHIFT);
arc: use FLATMEM with freeing of unused memory map instead of DISCONTIGMEM Currently ARC uses DISCONTIGMEM to cope with sparse physical memory address space on systems with 2 memory banks. While DISCONTIGMEM avoids wasting memory on unpopulated memory map, it adds both memory and CPU overhead relatively to FLATMEM. Moreover, DISCONTINGMEM is generally considered deprecated. The obvious replacement for DISCONTIGMEM would be SPARSEMEM, but it is also less efficient than FLATMEM in pfn_to_page() and page_to_pfn() conversions. Besides it requires tuning of SECTION_SIZE which is not trivial for possible ARC memory configuration. Since the memory map for both banks is always allocated from the "lowmem" bank, it is possible to use FLATMEM for two-bank configuration and simply free the unused hole in the memory map. All is required for that is to provide ARC-specific pfn_valid() that will take into account actual physical memory configuration and define HAVE_ARCH_PFN_VALID. The resulting kernel image configured with defconfig + HIGHMEM=y is smaller: $ size a/vmlinux b/vmlinux text data bss dec hex filename 4673503 1245456 279756 6198715 5e95bb a/vmlinux 4658706 1246864 279756 6185326 5e616e b/vmlinux $ ./scripts/bloat-o-meter a/vmlinux b/vmlinux add/remove: 28/30 grow/shrink: 42/399 up/down: 10986/-29025 (-18039) ... Total: Before=4709315, After = 4691276, chg -0.38% Booting nSIM with haps_ns.dts results in the following memory usage reports: a: Memory: 1559104K/1572864K available (3531K kernel code, 595K rwdata, 752K rodata, 136K init, 275K bss, 13760K reserved, 0K cma-reserved, 1048576K highmem) b: Memory: 1559112K/1572864K available (3519K kernel code, 594K rwdata, 752K rodata, 136K init, 280K bss, 13752K reserved, 0K cma-reserved, 1048576K highmem) Link: https://lkml.kernel.org/r/20201101170454.9567-11-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Meelis Roos <mroos@linux.ee> Cc: Michael Schmitz <schmitzmic@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 03:10:04 +00:00
arch_pfn_offset = min(min_low_pfn, min_high_pfn);
kmap_init();
arc: use FLATMEM with freeing of unused memory map instead of DISCONTIGMEM Currently ARC uses DISCONTIGMEM to cope with sparse physical memory address space on systems with 2 memory banks. While DISCONTIGMEM avoids wasting memory on unpopulated memory map, it adds both memory and CPU overhead relatively to FLATMEM. Moreover, DISCONTINGMEM is generally considered deprecated. The obvious replacement for DISCONTIGMEM would be SPARSEMEM, but it is also less efficient than FLATMEM in pfn_to_page() and page_to_pfn() conversions. Besides it requires tuning of SECTION_SIZE which is not trivial for possible ARC memory configuration. Since the memory map for both banks is always allocated from the "lowmem" bank, it is possible to use FLATMEM for two-bank configuration and simply free the unused hole in the memory map. All is required for that is to provide ARC-specific pfn_valid() that will take into account actual physical memory configuration and define HAVE_ARCH_PFN_VALID. The resulting kernel image configured with defconfig + HIGHMEM=y is smaller: $ size a/vmlinux b/vmlinux text data bss dec hex filename 4673503 1245456 279756 6198715 5e95bb a/vmlinux 4658706 1246864 279756 6185326 5e616e b/vmlinux $ ./scripts/bloat-o-meter a/vmlinux b/vmlinux add/remove: 28/30 grow/shrink: 42/399 up/down: 10986/-29025 (-18039) ... Total: Before=4709315, After = 4691276, chg -0.38% Booting nSIM with haps_ns.dts results in the following memory usage reports: a: Memory: 1559104K/1572864K available (3531K kernel code, 595K rwdata, 752K rodata, 136K init, 275K bss, 13760K reserved, 0K cma-reserved, 1048576K highmem) b: Memory: 1559112K/1572864K available (3519K kernel code, 594K rwdata, 752K rodata, 136K init, 280K bss, 13752K reserved, 0K cma-reserved, 1048576K highmem) Link: https://lkml.kernel.org/r/20201101170454.9567-11-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Meelis Roos <mroos@linux.ee> Cc: Michael Schmitz <schmitzmic@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 03:10:04 +00:00
#else /* CONFIG_HIGHMEM */
/* pfn_valid() uses this when FLATMEM=y and HIGHMEM=n */
max_mapnr = max_low_pfn - min_low_pfn;
#endif /* CONFIG_HIGHMEM */
mm: free_area_init: allow defining max_zone_pfn in descending order Some architectures (e.g. ARC) have the ZONE_HIGHMEM zone below the ZONE_NORMAL. Allowing free_area_init() parse max_zone_pfn array even it is sorted in descending order allows using free_area_init() on such architectures. Add top -> down traversal of max_zone_pfn array in free_area_init() and use the latter in ARC node/zone initialization. [rppt@kernel.org: ARC fix] Link: http://lkml.kernel.org/r/20200504153901.GM14260@kernel.org [rppt@linux.ibm.com: arc: free_area_init(): take into account PAE40 mode] Link: http://lkml.kernel.org/r/20200507205900.GH683243@linux.ibm.com [akpm@linux-foundation.org: declare arch_has_descending_max_zone_pfns()] Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Hoan Tran <hoan@os.amperecomputing.com> [arm64] Reviewed-by: Baoquan He <bhe@redhat.com> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Guenter Roeck <linux@roeck-us.net> Link: http://lkml.kernel.org/r/20200412194859.12663-18-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 22:58:03 +00:00
free_area_init(max_zone_pfn);
}
static void __init highmem_init(void)
{
#ifdef CONFIG_HIGHMEM
unsigned long tmp;
memblock_free(high_mem_start, high_mem_sz);
for (tmp = min_high_pfn; tmp < max_high_pfn; tmp++)
free_highmem_page(pfn_to_page(tmp));
#endif
}
/*
* mem_init - initializes memory
*
* Frees up bootmem
* Calculates and displays memory available/used
*/
void __init mem_init(void)
{
memblock: rename free_all_bootmem to memblock_free_all The conversion is done using sed -i 's@free_all_bootmem@memblock_free_all@' \ $(git grep -l free_all_bootmem) Link: http://lkml.kernel.org/r/1536927045-23536-26-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 22:09:30 +00:00
memblock_free_all();
highmem_init();
}
arc: use FLATMEM with freeing of unused memory map instead of DISCONTIGMEM Currently ARC uses DISCONTIGMEM to cope with sparse physical memory address space on systems with 2 memory banks. While DISCONTIGMEM avoids wasting memory on unpopulated memory map, it adds both memory and CPU overhead relatively to FLATMEM. Moreover, DISCONTINGMEM is generally considered deprecated. The obvious replacement for DISCONTIGMEM would be SPARSEMEM, but it is also less efficient than FLATMEM in pfn_to_page() and page_to_pfn() conversions. Besides it requires tuning of SECTION_SIZE which is not trivial for possible ARC memory configuration. Since the memory map for both banks is always allocated from the "lowmem" bank, it is possible to use FLATMEM for two-bank configuration and simply free the unused hole in the memory map. All is required for that is to provide ARC-specific pfn_valid() that will take into account actual physical memory configuration and define HAVE_ARCH_PFN_VALID. The resulting kernel image configured with defconfig + HIGHMEM=y is smaller: $ size a/vmlinux b/vmlinux text data bss dec hex filename 4673503 1245456 279756 6198715 5e95bb a/vmlinux 4658706 1246864 279756 6185326 5e616e b/vmlinux $ ./scripts/bloat-o-meter a/vmlinux b/vmlinux add/remove: 28/30 grow/shrink: 42/399 up/down: 10986/-29025 (-18039) ... Total: Before=4709315, After = 4691276, chg -0.38% Booting nSIM with haps_ns.dts results in the following memory usage reports: a: Memory: 1559104K/1572864K available (3531K kernel code, 595K rwdata, 752K rodata, 136K init, 275K bss, 13760K reserved, 0K cma-reserved, 1048576K highmem) b: Memory: 1559112K/1572864K available (3519K kernel code, 594K rwdata, 752K rodata, 136K init, 280K bss, 13752K reserved, 0K cma-reserved, 1048576K highmem) Link: https://lkml.kernel.org/r/20201101170454.9567-11-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Meelis Roos <mroos@linux.ee> Cc: Michael Schmitz <schmitzmic@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 03:10:04 +00:00
#ifdef CONFIG_HIGHMEM
int pfn_valid(unsigned long pfn)
{
return (pfn >= min_high_pfn && pfn <= max_high_pfn) ||
(pfn >= min_low_pfn && pfn <= max_low_pfn);
}
EXPORT_SYMBOL(pfn_valid);
#endif