linux-stable/arch/x86/um/shared/sysdep/ptrace_32.h

115 lines
3 KiB
C
Raw Normal View History

/*
* Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
#ifndef __SYSDEP_I386_PTRACE_H
#define __SYSDEP_I386_PTRACE_H
#include <generated/user_constants.h>
#include "sysdep/faultinfo.h"
#define MAX_REG_NR (UM_FRAME_SIZE / sizeof(unsigned long))
#define MAX_REG_OFFSET (UM_FRAME_SIZE)
[PATCH] uml: clean arch_switch usage Call arch_switch also in switch_to_skas, even if it's, for now, a no-op for that case (and mark this in the comment); this will change soon. Also, arch_switch for TT mode is actually useless when the PT proxy (a complicate debugging instrumentation for TT mode) is not enabled. In fact, it only calls update_debugregs, which checks debugregs_seq against seq (to check if the registers are up-to-date - seq here means a "version number" of the registers). If the ptrace proxy is not enabled, debugregs_seq always stays 0 and update_debugregs will be a no-op. So, optimize this out (the compiler can't do it). Also, I've been disappointed by the fact that it would make a lot of sense if, after calling a successful update_debugregs(current->thread.arch.debugregs_seq), current->thread.arch.debugregs_seq were updated with the new debugregs_seq. But this is not done. Is this a bug or a feature? For all purposes, it seems a bug (otherwise the whole mechanism does not make sense, which is also a possibility to check), which causes some performance only problems (not correctness), since we write_debugregs when not needed. Also, as suggested by Jeff, remove a redundant enabling of SIGVTALRM, comprised in the subsequent local_irq_enable(). I'm just a bit dubious if ordering matters there... Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Acked-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 10:30:21 +00:00
static inline void update_debugregs(int seq) {}
/* syscall emulation path in ptrace */
#ifndef PTRACE_SYSEMU
#define PTRACE_SYSEMU 31
#endif
void set_using_sysemu(int value);
int get_using_sysemu(void);
extern int sysemu_supported;
#define REGS_IP(r) ((r)[HOST_IP])
#define REGS_SP(r) ((r)[HOST_SP])
#define REGS_EFLAGS(r) ((r)[HOST_EFLAGS])
#define REGS_EAX(r) ((r)[HOST_AX])
#define REGS_EBX(r) ((r)[HOST_BX])
#define REGS_ECX(r) ((r)[HOST_CX])
#define REGS_EDX(r) ((r)[HOST_DX])
#define REGS_ESI(r) ((r)[HOST_SI])
#define REGS_EDI(r) ((r)[HOST_DI])
#define REGS_EBP(r) ((r)[HOST_BP])
#define REGS_CS(r) ((r)[HOST_CS])
#define REGS_SS(r) ((r)[HOST_SS])
#define REGS_DS(r) ((r)[HOST_DS])
#define REGS_ES(r) ((r)[HOST_ES])
#define REGS_FS(r) ((r)[HOST_FS])
#define REGS_GS(r) ((r)[HOST_GS])
#define REGS_SET_SYSCALL_RETURN(r, res) REGS_EAX(r) = (res)
#define IP_RESTART_SYSCALL(ip) ((ip) -= 2)
#define REGS_RESTART_SYSCALL(r) IP_RESTART_SYSCALL(REGS_IP(r))
#ifndef PTRACE_SYSEMU_SINGLESTEP
#define PTRACE_SYSEMU_SINGLESTEP 32
#endif
struct uml_pt_regs {
unsigned long gp[MAX_REG_NR];
unsigned long fp[HOST_FPX_SIZE];
struct faultinfo faultinfo;
long syscall;
int is_user;
};
#define EMPTY_UML_PT_REGS { }
#define UPT_IP(r) REGS_IP((r)->gp)
#define UPT_SP(r) REGS_SP((r)->gp)
#define UPT_EFLAGS(r) REGS_EFLAGS((r)->gp)
#define UPT_EAX(r) REGS_EAX((r)->gp)
#define UPT_EBX(r) REGS_EBX((r)->gp)
#define UPT_ECX(r) REGS_ECX((r)->gp)
#define UPT_EDX(r) REGS_EDX((r)->gp)
#define UPT_ESI(r) REGS_ESI((r)->gp)
#define UPT_EDI(r) REGS_EDI((r)->gp)
#define UPT_EBP(r) REGS_EBP((r)->gp)
#define UPT_ORIG_EAX(r) ((r)->syscall)
#define UPT_CS(r) REGS_CS((r)->gp)
#define UPT_SS(r) REGS_SS((r)->gp)
#define UPT_DS(r) REGS_DS((r)->gp)
#define UPT_ES(r) REGS_ES((r)->gp)
#define UPT_FS(r) REGS_FS((r)->gp)
#define UPT_GS(r) REGS_GS((r)->gp)
#define UPT_SYSCALL_ARG1(r) UPT_EBX(r)
#define UPT_SYSCALL_ARG2(r) UPT_ECX(r)
#define UPT_SYSCALL_ARG3(r) UPT_EDX(r)
#define UPT_SYSCALL_ARG4(r) UPT_ESI(r)
#define UPT_SYSCALL_ARG5(r) UPT_EDI(r)
#define UPT_SYSCALL_ARG6(r) UPT_EBP(r)
extern int user_context(unsigned long sp);
#define UPT_IS_USER(r) ((r)->is_user)
struct syscall_args {
unsigned long args[6];
};
#define SYSCALL_ARGS(r) ((struct syscall_args) \
{ .args = { UPT_SYSCALL_ARG1(r), \
UPT_SYSCALL_ARG2(r), \
UPT_SYSCALL_ARG3(r), \
UPT_SYSCALL_ARG4(r), \
UPT_SYSCALL_ARG5(r), \
UPT_SYSCALL_ARG6(r) } } )
#define UPT_RESTART_SYSCALL(r) REGS_RESTART_SYSCALL((r)->gp)
#define UPT_ORIG_SYSCALL(r) UPT_EAX(r)
#define UPT_SYSCALL_NR(r) UPT_ORIG_EAX(r)
#define UPT_SYSCALL_RET(r) UPT_EAX(r)
#define UPT_FAULTINFO(r) (&(r)->faultinfo)
extern void arch_init_registers(int pid);
#endif