mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-09-27 12:57:53 +00:00
Code Issues Releases Wiki Activity
linux-stable/drivers/pci/pcie/portdrv.h

140 lines
4.2 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
/* SPDX-License-Identifier: GPL-2.0 */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* File: portdrv.h
PCI/portdrv: Merge pcieport_if.h into portdrv.h pcieport_if.h contained the interfaces to register port service driver, e.g., pcie_port_service_register(). portdrv.h contained internal data structures of the port driver. I don't think it's worth keeping those files separate, since both headers and their users are all inside the PCI core. Merge pcieport_if.h directly in drivers/pci/pcie/portdrv.h and update the users to include that instead. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2018-03-09 17:42:01 +00:00
* Purpose: PCI Express Port Bus Driver's Data Structures
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*
* Copyright (C) 2004 Intel
* Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com)
*/
#ifndef _PORTDRV_H_
#define _PORTDRV_H_
PCI: pcie-check-and-return-bus_register-errors fix __must_check goes on the declaration, not the definition. Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-25 23:52:20 +00:00
#include <linux/compiler.h>
PCI/portdrv: Merge pcieport_if.h into portdrv.h pcieport_if.h contained the interfaces to register port service driver, e.g., pcie_port_service_register(). portdrv.h contained internal data structures of the port driver. I don't think it's worth keeping those files separate, since both headers and their users are all inside the PCI core. Merge pcieport_if.h directly in drivers/pci/pcie/portdrv.h and update the users to include that instead. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2018-03-09 17:42:01 +00:00
/* Service Type */
#define PCIE_PORT_SERVICE_PME_SHIFT 0 /* Power Management Event */
#define PCIE_PORT_SERVICE_PME (1 << PCIE_PORT_SERVICE_PME_SHIFT)
#define PCIE_PORT_SERVICE_AER_SHIFT 1 /* Advanced Error Reporting */
#define PCIE_PORT_SERVICE_AER (1 << PCIE_PORT_SERVICE_AER_SHIFT)
#define PCIE_PORT_SERVICE_HP_SHIFT 2 /* Native Hotplug */
#define PCIE_PORT_SERVICE_HP (1 << PCIE_PORT_SERVICE_HP_SHIFT)
#define PCIE_PORT_SERVICE_VC_SHIFT 3 /* Virtual Channel */
#define PCIE_PORT_SERVICE_VC (1 << PCIE_PORT_SERVICE_VC_SHIFT)
#define PCIE_PORT_SERVICE_DPC_SHIFT 4 /* Downstream Port Containment */
#define PCIE_PORT_SERVICE_DPC (1 << PCIE_PORT_SERVICE_DPC_SHIFT)
PCI: Add Downstream Port Containment portdrv service type Add the Downstream Port Containment (PCIE_PORT_SERVICE_DPC) portdrv service type, available if the device has the DPC extended capability. [bhelgaas: split to separate patch, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-05-02 20:10:31 +00:00
#define PCIE_PORT_DEVICE_MAXSERVICES 5
PCI/portdrv: Merge pcieport_if.h into portdrv.h pcieport_if.h contained the interfaces to register port service driver, e.g., pcie_port_service_register(). portdrv.h contained internal data structures of the port driver. I don't think it's worth keeping those files separate, since both headers and their users are all inside the PCI core. Merge pcieport_if.h directly in drivers/pci/pcie/portdrv.h and update the users to include that instead. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2018-03-09 17:42:01 +00:00
/* Port Type */
#define PCIE_ANY_PORT (~0)
struct pcie_device {
int irq; /* Service IRQ/MSI/MSI-X Vector */
struct pci_dev *port; /* Root/Upstream/Downstream Port */
u32 service; /* Port service this device represents */
void *priv_data; /* Service Private Data */
struct device device; /* Generic Device Interface */
};
#define to_pcie_device(d) container_of(d, struct pcie_device, device)
static inline void set_service_data(struct pcie_device *dev, void *data)
{
dev->priv_data = data;
}
static inline void *get_service_data(struct pcie_device *dev)
{
return dev->priv_data;
}
struct pcie_port_service_driver {
const char *name;
int (*probe) (struct pcie_device *dev);
void (*remove) (struct pcie_device *dev);
int (*suspend) (struct pcie_device *dev);
int (*resume) (struct pcie_device *dev);
/* Device driver may resume normal operations */
void (*error_resume)(struct pci_dev *dev);
/* Link Reset Capability - AER service driver specific */
pci_ers_result_t (*reset_link) (struct pci_dev *dev);
int port_type; /* Type of the port this driver can handle */
u32 service; /* Port service this device represents */
struct device_driver driver;
};
#define to_service_driver(d) \
container_of(d, struct pcie_port_service_driver, driver)
int pcie_port_service_register(struct pcie_port_service_driver *new);
void pcie_port_service_unregister(struct pcie_port_service_driver *new);
PCI/PCIe portdrv: Fix allocation of interrupts If MSI-X interrupt mode is used by the PCI Express port driver, too many vectors are allocated and it is not ensured that the right vectors will be used for the right services. Namely, the PCI Express specification states that both PCI Express native PME and PCI Express hotplug will always use the same MSI or MSI-X message for signalling interrupts, which implies that the same vector will be used by both of them. Also, the VC service does not use interrupts at all. Moreover, is not clear which of the vectors allocated by pci_enable_msix() in the current code will be used for PME and hotplug and which of them will be used for AER if all of these services are configured. For these reasons, rework the allocation of interrupts for PCI Express ports so that if MSI-X are enabled, the right vectors will be used for the right purposes. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-23 23:23:22 +00:00
/*
PCI/portdrv: Support multiple interrupts for MSI as well as MSI-X Root Ports can generate several different interrupts using either MSI or MSI-X, but we only support that for MSI-X. Ports that support MSI but not MSI-X are currently limited to sharing a single interrupt. Rename pcie_port_enable_msix() to pcie_port_enable_irq_vec() and extend it to support multiple interrupts using either MSI-X (preferred) or MSI. Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> [bhelgaas: changelog, reword comments, simplify PME/hotplug no-MSI logic] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2017-05-23 14:23:58 +00:00
* The PCIe Capability Interrupt Message Number (PCIe r3.1, sec 7.8.2) must
* be one of the first 32 MSI-X entries. Per PCI r3.0, sec 6.8.3.1, MSI
* supports a maximum of 32 vectors per function.
PCI/PCIe portdrv: Fix allocation of interrupts If MSI-X interrupt mode is used by the PCI Express port driver, too many vectors are allocated and it is not ensured that the right vectors will be used for the right services. Namely, the PCI Express specification states that both PCI Express native PME and PCI Express hotplug will always use the same MSI or MSI-X message for signalling interrupts, which implies that the same vector will be used by both of them. Also, the VC service does not use interrupts at all. Moreover, is not clear which of the vectors allocated by pci_enable_msix() in the current code will be used for PME and hotplug and which of them will be used for AER if all of these services are configured. For these reasons, rework the allocation of interrupts for PCI Express ports so that if MSI-X are enabled, the right vectors will be used for the right purposes. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-23 23:23:22 +00:00
*/
PCI/portdrv: Support multiple interrupts for MSI as well as MSI-X Root Ports can generate several different interrupts using either MSI or MSI-X, but we only support that for MSI-X. Ports that support MSI but not MSI-X are currently limited to sharing a single interrupt. Rename pcie_port_enable_msix() to pcie_port_enable_irq_vec() and extend it to support multiple interrupts using either MSI-X (preferred) or MSI. Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> [bhelgaas: changelog, reword comments, simplify PME/hotplug no-MSI logic] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2017-05-23 14:23:58 +00:00
#define PCIE_PORT_MAX_MSI_ENTRIES 32
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
PCI: Widen portdrv service type from 4 bits to 8 bits The names of port service devices previously used one nibble to encode the port type and another nibble to encode the service type. We're about to add a fifth service type, so change device names to use one *byte* to encode the service type. For example, a hotplug port service on a downstream bridge was previously called "pcie24" and is now called "pcie204". The "2" encodes the device type (PCI_EXP_TYPE_DOWNSTREAM - 4), and the "4" (now "04") encodes the service (PCIE_PORT_SERVICE_HP). Based on Lukas Wunner's patch: https://github.com/l1k/linux/commit/b688d6e4873ab082e5916b1a993bc1d38c6f4178 [bhelgaas: split to separate patch, expand changelog] Based-on-patch-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-05-03 14:58:11 +00:00
#define get_descriptor_id(type, service) (((type - 4) << 8) | service)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
extern struct bus_type pcie_port_bus_type;
PCI: Remove "extern" from function declarations We had an inconsistent mix of using and omitting the "extern" keyword on function declarations in header files. This removes them all. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-12 18:02:59 +00:00
int pcie_port_device_register(struct pci_dev *dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#ifdef CONFIG_PM
PCI: Remove "extern" from function declarations We had an inconsistent mix of using and omitting the "extern" keyword on function declarations in header files. This removes them all. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-12 18:02:59 +00:00
int pcie_port_device_suspend(struct device *dev);
int pcie_port_device_resume(struct device *dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#endif
PCI: Remove "extern" from function declarations We had an inconsistent mix of using and omitting the "extern" keyword on function declarations in header files. This removes them all. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-12 18:02:59 +00:00
void pcie_port_device_remove(struct pci_dev *dev);
int __must_check pcie_port_bus_register(void);
void pcie_port_bus_unregister(void);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
PCI: PCIe: Ask BIOS for control of all native services at once After commit 852972acff8f10f3a15679be2059bb94916cba5d (ACPI: Disable ASPM if the platform won't provide _OSC control for PCIe) control of the PCIe Capability Structure is unconditionally requested by acpi_pci_root_add(), which in principle may cause problems to happen in two ways. First, the BIOS may refuse to give control of the PCIe Capability Structure if it is not asked for any of the _OSC features depending on it at the same time. Second, the BIOS may assume that control of the _OSC features depending on the PCIe Capability Structure will be requested in the future and may behave incorrectly if that doesn't happen. For this reason, control of the PCIe Capability Structure should always be requested along with control of any other _OSC features that may depend on it (ie. PCIe native PME, PCIe native hot-plug, PCIe AER). Rework the PCIe port driver so that (1) it checks which native PCIe port services can be enabled, according to the BIOS, and (2) it requests control of all these services simultaneously. In particular, this causes pcie_portdrv_probe() to fail if the BIOS refuses to grant control of the PCIe Capability Structure, which means that no native PCIe port services can be enabled for the PCIe Root Complex the given port belongs to. If that happens, ASPM is disabled to avoid problems with mishandling it by the part of the PCIe hierarchy for which control of the PCIe Capability Structure has not been received. Make it possible to override this behavior using 'pcie_ports=native' (use the PCIe native services regardless of the BIOS response to the control request), or 'pcie_ports=compat' (do not use the PCIe native services at all). Accordingly, rework the existing PCIe port service drivers so that they don't request control of the services directly. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-08-21 20:02:38 +00:00
struct pci_dev;
PCI: Add pcie_hp=nomsi to disable MSI/MSI-X for pciehp driver Add a parameter to avoid using MSI/MSI-X for PCIe native hotplug; it's known to be buggy on some platforms. In my environment, while shutting down, following stack trace is shown sometimes. irq 16: nobody cared (try booting with the "irqpoll" option) Pid: 1081, comm: reboot Not tainted 3.2.0 #1 Call Trace: <IRQ> [<ffffffff810cec1d>] __report_bad_irq+0x3d/0xe0 [<ffffffff810cee1c>] note_interrupt+0x15c/0x210 [<ffffffff810cc485>] handle_irq_event_percpu+0xb5/0x210 [<ffffffff810cc621>] handle_irq_event+0x41/0x70 [<ffffffff810cf675>] handle_fasteoi_irq+0x55/0xc0 [<ffffffff81015356>] handle_irq+0x46/0xb0 [<ffffffff814fbe9d>] do_IRQ+0x5d/0xe0 [<ffffffff814f146e>] common_interrupt+0x6e/0x6e [<ffffffff8106b040>] ? __do_softirq+0x60/0x210 [<ffffffff8108aeb1>] ? hrtimer_interrupt+0x151/0x240 [<ffffffff814fb5ec>] call_softirq+0x1c/0x30 [<ffffffff810152d5>] do_softirq+0x65/0xa0 [<ffffffff8106ae9d>] irq_exit+0xbd/0xe0 [<ffffffff814fbf8e>] smp_apic_timer_interrupt+0x6e/0x99 [<ffffffff814f9e5e>] apic_timer_interrupt+0x6e/0x80 <EOI> [<ffffffff814f0fb1>] ? _raw_spin_unlock_irqrestore+0x11/0x20 [<ffffffff812629fc>] pci_bus_write_config_word+0x6c/0x80 [<ffffffff81266fc2>] pci_intx+0x52/0xa0 [<ffffffff8127de3d>] pci_intx_for_msi+0x1d/0x30 [<ffffffff8127e4fb>] pci_msi_shutdown+0x7b/0x110 [<ffffffff81269d34>] pci_device_shutdown+0x34/0x50 [<ffffffff81326c4f>] device_shutdown+0x2f/0x140 [<ffffffff8107b981>] kernel_restart_prepare+0x31/0x40 [<ffffffff8107b9e6>] kernel_restart+0x16/0x60 [<ffffffff8107bbfd>] sys_reboot+0x1ad/0x220 [<ffffffff814f4b90>] ? do_page_fault+0x1e0/0x460 [<ffffffff811942d0>] ? __sync_filesystem+0x90/0x90 [<ffffffff8105c9aa>] ? __cond_resched+0x2a/0x40 [<ffffffff814ef090>] ? _cond_resched+0x30/0x40 [<ffffffff81169e17>] ? iterate_supers+0xb7/0xd0 [<ffffffff814f9382>] system_call_fastpath+0x16/0x1b handlers: [<ffffffff8138a0f0>] usb_hcd_irq [<ffffffff8138a0f0>] usb_hcd_irq [<ffffffff8138a0f0>] usb_hcd_irq Disabling IRQ #16 An un-wanted interrupt is generated when PCI driver switches from MSI/MSI-X to INTx while shutting down the device. The interrupt does not happen if MSI/MSI-X is not used on the device. I confirmed that this problem does not happen if pcie_hp=nomsi was specified and hotplug operation worked fine as usual. v2: Automatically disable MSI/MSI-X against following device: PCI bridge: Integrated Device Technology, Inc. Device 807f (rev 02) v3: Based on the review comment, combile the if statements. v4: Removed module parameter. Move some code to build pciehp as a module. Move device specific code to driver/pci/quirks.c. v5: Drop a device specific code until getting a vendor statement. Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-02 16:09:22 +00:00
#ifdef CONFIG_HOTPLUG_PCI_PCIE
extern bool pciehp_msi_disabled;
static inline bool pciehp_no_msi(void)
{
return pciehp_msi_disabled;
}
#else /* !CONFIG_HOTPLUG_PCI_PCIE */
static inline bool pciehp_no_msi(void) { return false; }
#endif /* !CONFIG_HOTPLUG_PCI_PCIE */
PCI PM: Make it possible to force using INTx for PCIe PME signaling Apparently, some machines may have problems with PCI run-time power management if MSIs are used for the native PCIe PME signaling. In particular, on the MSI Wind U-100 PCIe PME interrupts are not generated by a PCIe root port after a resume from suspend to RAM, if the system wake-up was triggered by a PME from the device attached to this port. [It doesn't help to free the interrupt on suspend and request it back on resume, even if that is done along with disabling the MSI and re-enabling it, respectively.] However, if INTx interrupts are used for this purpose on the same machine, everything works just fine. For this reason, add a kernel command line switch allowing one to request that MSIs be not used for the native PCIe PME signaling, introduce a DMI table allowing us to blacklist machines that need this switch to be set by default and put the MSI Wind U-100 into this table. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-17 22:40:07 +00:00
#ifdef CONFIG_PCIE_PME
extern bool pcie_pme_msi_disabled;
static inline void pcie_pme_disable_msi(void)
{
pcie_pme_msi_disabled = true;
}
static inline bool pcie_pme_no_msi(void)
{
return pcie_pme_msi_disabled;
}
PCI: PCIe: Ask BIOS for control of all native services at once After commit 852972acff8f10f3a15679be2059bb94916cba5d (ACPI: Disable ASPM if the platform won't provide _OSC control for PCIe) control of the PCIe Capability Structure is unconditionally requested by acpi_pci_root_add(), which in principle may cause problems to happen in two ways. First, the BIOS may refuse to give control of the PCIe Capability Structure if it is not asked for any of the _OSC features depending on it at the same time. Second, the BIOS may assume that control of the _OSC features depending on the PCIe Capability Structure will be requested in the future and may behave incorrectly if that doesn't happen. For this reason, control of the PCIe Capability Structure should always be requested along with control of any other _OSC features that may depend on it (ie. PCIe native PME, PCIe native hot-plug, PCIe AER). Rework the PCIe port driver so that (1) it checks which native PCIe port services can be enabled, according to the BIOS, and (2) it requests control of all these services simultaneously. In particular, this causes pcie_portdrv_probe() to fail if the BIOS refuses to grant control of the PCIe Capability Structure, which means that no native PCIe port services can be enabled for the PCIe Root Complex the given port belongs to. If that happens, ASPM is disabled to avoid problems with mishandling it by the part of the PCIe hierarchy for which control of the PCIe Capability Structure has not been received. Make it possible to override this behavior using 'pcie_ports=native' (use the PCIe native services regardless of the BIOS response to the control request), or 'pcie_ports=compat' (do not use the PCIe native services at all). Accordingly, rework the existing PCIe port service drivers so that they don't request control of the services directly. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-08-21 20:02:38 +00:00
PCI: Remove "extern" from function declarations We had an inconsistent mix of using and omitting the "extern" keyword on function declarations in header files. This removes them all. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-12 18:02:59 +00:00
void pcie_pme_interrupt_enable(struct pci_dev *dev, bool enable);
PCI PM: Make it possible to force using INTx for PCIe PME signaling Apparently, some machines may have problems with PCI run-time power management if MSIs are used for the native PCIe PME signaling. In particular, on the MSI Wind U-100 PCIe PME interrupts are not generated by a PCIe root port after a resume from suspend to RAM, if the system wake-up was triggered by a PME from the device attached to this port. [It doesn't help to free the interrupt on suspend and request it back on resume, even if that is done along with disabling the MSI and re-enabling it, respectively.] However, if INTx interrupts are used for this purpose on the same machine, everything works just fine. For this reason, add a kernel command line switch allowing one to request that MSIs be not used for the native PCIe PME signaling, introduce a DMI table allowing us to blacklist machines that need this switch to be set by default and put the MSI Wind U-100 into this table. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-17 22:40:07 +00:00
#else /* !CONFIG_PCIE_PME */
static inline void pcie_pme_disable_msi(void) {}
static inline bool pcie_pme_no_msi(void) { return false; }
PCI: PCIe: Ask BIOS for control of all native services at once After commit 852972acff8f10f3a15679be2059bb94916cba5d (ACPI: Disable ASPM if the platform won't provide _OSC control for PCIe) control of the PCIe Capability Structure is unconditionally requested by acpi_pci_root_add(), which in principle may cause problems to happen in two ways. First, the BIOS may refuse to give control of the PCIe Capability Structure if it is not asked for any of the _OSC features depending on it at the same time. Second, the BIOS may assume that control of the _OSC features depending on the PCIe Capability Structure will be requested in the future and may behave incorrectly if that doesn't happen. For this reason, control of the PCIe Capability Structure should always be requested along with control of any other _OSC features that may depend on it (ie. PCIe native PME, PCIe native hot-plug, PCIe AER). Rework the PCIe port driver so that (1) it checks which native PCIe port services can be enabled, according to the BIOS, and (2) it requests control of all these services simultaneously. In particular, this causes pcie_portdrv_probe() to fail if the BIOS refuses to grant control of the PCIe Capability Structure, which means that no native PCIe port services can be enabled for the PCIe Root Complex the given port belongs to. If that happens, ASPM is disabled to avoid problems with mishandling it by the part of the PCIe hierarchy for which control of the PCIe Capability Structure has not been received. Make it possible to override this behavior using 'pcie_ports=native' (use the PCIe native services regardless of the BIOS response to the control request), or 'pcie_ports=compat' (do not use the PCIe native services at all). Accordingly, rework the existing PCIe port service drivers so that they don't request control of the services directly. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-08-21 20:02:38 +00:00
static inline void pcie_pme_interrupt_enable(struct pci_dev *dev, bool en) {}
PCI PM: Make it possible to force using INTx for PCIe PME signaling Apparently, some machines may have problems with PCI run-time power management if MSIs are used for the native PCIe PME signaling. In particular, on the MSI Wind U-100 PCIe PME interrupts are not generated by a PCIe root port after a resume from suspend to RAM, if the system wake-up was triggered by a PME from the device attached to this port. [It doesn't help to free the interrupt on suspend and request it back on resume, even if that is done along with disabling the MSI and re-enabling it, respectively.] However, if INTx interrupts are used for this purpose on the same machine, everything works just fine. For this reason, add a kernel command line switch allowing one to request that MSIs be not used for the native PCIe PME signaling, introduce a DMI table allowing us to blacklist machines that need this switch to be set by default and put the MSI Wind U-100 into this table. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-17 22:40:07 +00:00
#endif /* !CONFIG_PCIE_PME */
PCI: PCIe: Ask BIOS for control of all native services at once After commit 852972acff8f10f3a15679be2059bb94916cba5d (ACPI: Disable ASPM if the platform won't provide _OSC control for PCIe) control of the PCIe Capability Structure is unconditionally requested by acpi_pci_root_add(), which in principle may cause problems to happen in two ways. First, the BIOS may refuse to give control of the PCIe Capability Structure if it is not asked for any of the _OSC features depending on it at the same time. Second, the BIOS may assume that control of the _OSC features depending on the PCIe Capability Structure will be requested in the future and may behave incorrectly if that doesn't happen. For this reason, control of the PCIe Capability Structure should always be requested along with control of any other _OSC features that may depend on it (ie. PCIe native PME, PCIe native hot-plug, PCIe AER). Rework the PCIe port driver so that (1) it checks which native PCIe port services can be enabled, according to the BIOS, and (2) it requests control of all these services simultaneously. In particular, this causes pcie_portdrv_probe() to fail if the BIOS refuses to grant control of the PCIe Capability Structure, which means that no native PCIe port services can be enabled for the PCIe Root Complex the given port belongs to. If that happens, ASPM is disabled to avoid problems with mishandling it by the part of the PCIe hierarchy for which control of the PCIe Capability Structure has not been received. Make it possible to override this behavior using 'pcie_ports=native' (use the PCIe native services regardless of the BIOS response to the control request), or 'pcie_ports=compat' (do not use the PCIe native services at all). Accordingly, rework the existing PCIe port service drivers so that they don't request control of the services directly. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-08-21 20:02:38 +00:00
#ifdef CONFIG_ACPI
PCI: Remove return values from pcie_port_platform_notify() and relatives Now that pcie_port_acpi_setup() always returns 0, make it and its callers void functions and stop checking the return values. [bhelgaas: changelog] Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-04-08 17:35:51 +00:00
void pcie_port_acpi_setup(struct pci_dev *port, int *mask);
PCI: PCIe: Ask BIOS for control of all native services at once After commit 852972acff8f10f3a15679be2059bb94916cba5d (ACPI: Disable ASPM if the platform won't provide _OSC control for PCIe) control of the PCIe Capability Structure is unconditionally requested by acpi_pci_root_add(), which in principle may cause problems to happen in two ways. First, the BIOS may refuse to give control of the PCIe Capability Structure if it is not asked for any of the _OSC features depending on it at the same time. Second, the BIOS may assume that control of the _OSC features depending on the PCIe Capability Structure will be requested in the future and may behave incorrectly if that doesn't happen. For this reason, control of the PCIe Capability Structure should always be requested along with control of any other _OSC features that may depend on it (ie. PCIe native PME, PCIe native hot-plug, PCIe AER). Rework the PCIe port driver so that (1) it checks which native PCIe port services can be enabled, according to the BIOS, and (2) it requests control of all these services simultaneously. In particular, this causes pcie_portdrv_probe() to fail if the BIOS refuses to grant control of the PCIe Capability Structure, which means that no native PCIe port services can be enabled for the PCIe Root Complex the given port belongs to. If that happens, ASPM is disabled to avoid problems with mishandling it by the part of the PCIe hierarchy for which control of the PCIe Capability Structure has not been received. Make it possible to override this behavior using 'pcie_ports=native' (use the PCIe native services regardless of the BIOS response to the control request), or 'pcie_ports=compat' (do not use the PCIe native services at all). Accordingly, rework the existing PCIe port service drivers so that they don't request control of the services directly. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-08-21 20:02:38 +00:00
PCI: Remove return values from pcie_port_platform_notify() and relatives Now that pcie_port_acpi_setup() always returns 0, make it and its callers void functions and stop checking the return values. [bhelgaas: changelog] Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-04-08 17:35:51 +00:00
static inline void pcie_port_platform_notify(struct pci_dev *port, int *mask)
PCI: PCIe: Ask BIOS for control of all native services at once After commit 852972acff8f10f3a15679be2059bb94916cba5d (ACPI: Disable ASPM if the platform won't provide _OSC control for PCIe) control of the PCIe Capability Structure is unconditionally requested by acpi_pci_root_add(), which in principle may cause problems to happen in two ways. First, the BIOS may refuse to give control of the PCIe Capability Structure if it is not asked for any of the _OSC features depending on it at the same time. Second, the BIOS may assume that control of the _OSC features depending on the PCIe Capability Structure will be requested in the future and may behave incorrectly if that doesn't happen. For this reason, control of the PCIe Capability Structure should always be requested along with control of any other _OSC features that may depend on it (ie. PCIe native PME, PCIe native hot-plug, PCIe AER). Rework the PCIe port driver so that (1) it checks which native PCIe port services can be enabled, according to the BIOS, and (2) it requests control of all these services simultaneously. In particular, this causes pcie_portdrv_probe() to fail if the BIOS refuses to grant control of the PCIe Capability Structure, which means that no native PCIe port services can be enabled for the PCIe Root Complex the given port belongs to. If that happens, ASPM is disabled to avoid problems with mishandling it by the part of the PCIe hierarchy for which control of the PCIe Capability Structure has not been received. Make it possible to override this behavior using 'pcie_ports=native' (use the PCIe native services regardless of the BIOS response to the control request), or 'pcie_ports=compat' (do not use the PCIe native services at all). Accordingly, rework the existing PCIe port service drivers so that they don't request control of the services directly. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-08-21 20:02:38 +00:00
{
PCI: Remove return values from pcie_port_platform_notify() and relatives Now that pcie_port_acpi_setup() always returns 0, make it and its callers void functions and stop checking the return values. [bhelgaas: changelog] Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-04-08 17:35:51 +00:00
pcie_port_acpi_setup(port, mask);
PCI: PCIe: Ask BIOS for control of all native services at once After commit 852972acff8f10f3a15679be2059bb94916cba5d (ACPI: Disable ASPM if the platform won't provide _OSC control for PCIe) control of the PCIe Capability Structure is unconditionally requested by acpi_pci_root_add(), which in principle may cause problems to happen in two ways. First, the BIOS may refuse to give control of the PCIe Capability Structure if it is not asked for any of the _OSC features depending on it at the same time. Second, the BIOS may assume that control of the _OSC features depending on the PCIe Capability Structure will be requested in the future and may behave incorrectly if that doesn't happen. For this reason, control of the PCIe Capability Structure should always be requested along with control of any other _OSC features that may depend on it (ie. PCIe native PME, PCIe native hot-plug, PCIe AER). Rework the PCIe port driver so that (1) it checks which native PCIe port services can be enabled, according to the BIOS, and (2) it requests control of all these services simultaneously. In particular, this causes pcie_portdrv_probe() to fail if the BIOS refuses to grant control of the PCIe Capability Structure, which means that no native PCIe port services can be enabled for the PCIe Root Complex the given port belongs to. If that happens, ASPM is disabled to avoid problems with mishandling it by the part of the PCIe hierarchy for which control of the PCIe Capability Structure has not been received. Make it possible to override this behavior using 'pcie_ports=native' (use the PCIe native services regardless of the BIOS response to the control request), or 'pcie_ports=compat' (do not use the PCIe native services at all). Accordingly, rework the existing PCIe port service drivers so that they don't request control of the services directly. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-08-21 20:02:38 +00:00
}
#else /* !CONFIG_ACPI */
PCI: Remove return values from pcie_port_platform_notify() and relatives Now that pcie_port_acpi_setup() always returns 0, make it and its callers void functions and stop checking the return values. [bhelgaas: changelog] Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-04-08 17:35:51 +00:00
static inline void pcie_port_platform_notify(struct pci_dev *port, int *mask){}
PCI: PCIe: Ask BIOS for control of all native services at once After commit 852972acff8f10f3a15679be2059bb94916cba5d (ACPI: Disable ASPM if the platform won't provide _OSC control for PCIe) control of the PCIe Capability Structure is unconditionally requested by acpi_pci_root_add(), which in principle may cause problems to happen in two ways. First, the BIOS may refuse to give control of the PCIe Capability Structure if it is not asked for any of the _OSC features depending on it at the same time. Second, the BIOS may assume that control of the _OSC features depending on the PCIe Capability Structure will be requested in the future and may behave incorrectly if that doesn't happen. For this reason, control of the PCIe Capability Structure should always be requested along with control of any other _OSC features that may depend on it (ie. PCIe native PME, PCIe native hot-plug, PCIe AER). Rework the PCIe port driver so that (1) it checks which native PCIe port services can be enabled, according to the BIOS, and (2) it requests control of all these services simultaneously. In particular, this causes pcie_portdrv_probe() to fail if the BIOS refuses to grant control of the PCIe Capability Structure, which means that no native PCIe port services can be enabled for the PCIe Root Complex the given port belongs to. If that happens, ASPM is disabled to avoid problems with mishandling it by the part of the PCIe hierarchy for which control of the PCIe Capability Structure has not been received. Make it possible to override this behavior using 'pcie_ports=native' (use the PCIe native services regardless of the BIOS response to the control request), or 'pcie_ports=compat' (do not use the PCIe native services at all). Accordingly, rework the existing PCIe port service drivers so that they don't request control of the services directly. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-08-21 20:02:38 +00:00
#endif /* !CONFIG_ACPI */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#endif /* _PORTDRV_H_ */
Reference in a new issue Copy permalink