linux-stable/arch/x86/mm/pat.c

1088 lines
27 KiB
C
Raw Normal View History

/*
* Handle caching attributes in page tables (PAT)
*
* Authors: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
* Suresh B Siddha <suresh.b.siddha@intel.com>
*
* Loosely based on earlier PAT patchset from Eric Biederman and Andi Kleen.
*/
#include <linux/seq_file.h>
#include <linux/bootmem.h>
#include <linux/debugfs.h>
#include <linux/kernel.h>
#include <linux/module.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/fs.h>
#include <linux/rbtree.h>
#include <asm/cacheflush.h>
#include <asm/processor.h>
#include <asm/tlbflush.h>
#include <asm/x86_init.h>
#include <asm/pgtable.h>
#include <asm/fcntl.h>
#include <asm/e820.h>
#include <asm/mtrr.h>
#include <asm/page.h>
#include <asm/msr.h>
#include <asm/pat.h>
#include <asm/io.h>
#include "pat_internal.h"
#include "mm_internal.h"
x86/mm/pat: Convert to pr_*() usage Use pr_info() instead of the old printk to prefix the component where things are coming from. With this readers will know exactly where the message is coming from. We use pr_* helpers but define pr_fmt to the empty string for easier grepping for those error messages. We leave the users of dprintk() in place, this will print only when the debugpat kernel parameter is enabled. We want to leave those enabled as a debug feature, but also make them use the same prefix. Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> [ Kill pr_fmt. ] Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Doug Ledford <dledford@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: cocci@systeme.lip6.fr Cc: plagnioj@jcrosoft.com Cc: tomi.valkeinen@ti.com Link: http://lkml.kernel.org/r/1430425520-22275-2-git-send-email-mcgrof@do-not-panic.com Link: http://lkml.kernel.org/r/1432628901-18044-9-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-26 08:28:11 +00:00
#undef pr_fmt
#define pr_fmt(fmt) "" fmt
static bool boot_cpu_done;
x86/mm/pat: Wrap pat_enabled into a function API We use pat_enabled in x86-specific code to see if PAT is enabled or not but we're granting full access to it even though readers do not need to set it. If, for instance, we granted access to it to modules later they then could override the variable setting... no bueno. This renames pat_enabled to a new static variable __pat_enabled. Folks are redirected to use pat_enabled() now. Code that sets this can only be internal to pat.c. Apart from the early kernel parameter "nopat" to disable PAT, we also have a few cases that disable it later and make use of a helper pat_disable(). It is wrapped under an ifdef but since that code cannot run unless PAT was enabled its not required to wrap it with ifdefs, unwrap that. Likewise, since "nopat" doesn't really change non-PAT systems just remove that ifdef as well. Although we could add and use an early_param_off(), these helpers don't use __read_mostly but we want to keep __read_mostly for __pat_enabled as this is a hot path -- upon boot, for instance, a simple guest may see ~4k accesses to pat_enabled(). Since __read_mostly early boot params are not that common we don't add a helper for them just yet. Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Doug Ledford <dledford@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kyle McMartin <kyle@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1430425520-22275-3-git-send-email-mcgrof@do-not-panic.com Link: http://lkml.kernel.org/r/1432628901-18044-13-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-26 08:28:15 +00:00
static int __read_mostly __pat_enabled = IS_ENABLED(CONFIG_X86_PAT);
static inline void pat_disable(const char *reason)
{
x86/mm/pat: Wrap pat_enabled into a function API We use pat_enabled in x86-specific code to see if PAT is enabled or not but we're granting full access to it even though readers do not need to set it. If, for instance, we granted access to it to modules later they then could override the variable setting... no bueno. This renames pat_enabled to a new static variable __pat_enabled. Folks are redirected to use pat_enabled() now. Code that sets this can only be internal to pat.c. Apart from the early kernel parameter "nopat" to disable PAT, we also have a few cases that disable it later and make use of a helper pat_disable(). It is wrapped under an ifdef but since that code cannot run unless PAT was enabled its not required to wrap it with ifdefs, unwrap that. Likewise, since "nopat" doesn't really change non-PAT systems just remove that ifdef as well. Although we could add and use an early_param_off(), these helpers don't use __read_mostly but we want to keep __read_mostly for __pat_enabled as this is a hot path -- upon boot, for instance, a simple guest may see ~4k accesses to pat_enabled(). Since __read_mostly early boot params are not that common we don't add a helper for them just yet. Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Doug Ledford <dledford@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kyle McMartin <kyle@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1430425520-22275-3-git-send-email-mcgrof@do-not-panic.com Link: http://lkml.kernel.org/r/1432628901-18044-13-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-26 08:28:15 +00:00
__pat_enabled = 0;
x86/mm/pat: Convert to pr_*() usage Use pr_info() instead of the old printk to prefix the component where things are coming from. With this readers will know exactly where the message is coming from. We use pr_* helpers but define pr_fmt to the empty string for easier grepping for those error messages. We leave the users of dprintk() in place, this will print only when the debugpat kernel parameter is enabled. We want to leave those enabled as a debug feature, but also make them use the same prefix. Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> [ Kill pr_fmt. ] Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Doug Ledford <dledford@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: cocci@systeme.lip6.fr Cc: plagnioj@jcrosoft.com Cc: tomi.valkeinen@ti.com Link: http://lkml.kernel.org/r/1430425520-22275-2-git-send-email-mcgrof@do-not-panic.com Link: http://lkml.kernel.org/r/1432628901-18044-9-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-26 08:28:11 +00:00
pr_info("x86/PAT: %s\n", reason);
}
static int __init nopat(char *str)
{
pat_disable("PAT support disabled.");
return 0;
}
early_param("nopat", nopat);
x86/mm/pat: Wrap pat_enabled into a function API We use pat_enabled in x86-specific code to see if PAT is enabled or not but we're granting full access to it even though readers do not need to set it. If, for instance, we granted access to it to modules later they then could override the variable setting... no bueno. This renames pat_enabled to a new static variable __pat_enabled. Folks are redirected to use pat_enabled() now. Code that sets this can only be internal to pat.c. Apart from the early kernel parameter "nopat" to disable PAT, we also have a few cases that disable it later and make use of a helper pat_disable(). It is wrapped under an ifdef but since that code cannot run unless PAT was enabled its not required to wrap it with ifdefs, unwrap that. Likewise, since "nopat" doesn't really change non-PAT systems just remove that ifdef as well. Although we could add and use an early_param_off(), these helpers don't use __read_mostly but we want to keep __read_mostly for __pat_enabled as this is a hot path -- upon boot, for instance, a simple guest may see ~4k accesses to pat_enabled(). Since __read_mostly early boot params are not that common we don't add a helper for them just yet. Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Doug Ledford <dledford@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kyle McMartin <kyle@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1430425520-22275-3-git-send-email-mcgrof@do-not-panic.com Link: http://lkml.kernel.org/r/1432628901-18044-13-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-26 08:28:15 +00:00
bool pat_enabled(void)
{
x86/mm/pat: Wrap pat_enabled into a function API We use pat_enabled in x86-specific code to see if PAT is enabled or not but we're granting full access to it even though readers do not need to set it. If, for instance, we granted access to it to modules later they then could override the variable setting... no bueno. This renames pat_enabled to a new static variable __pat_enabled. Folks are redirected to use pat_enabled() now. Code that sets this can only be internal to pat.c. Apart from the early kernel parameter "nopat" to disable PAT, we also have a few cases that disable it later and make use of a helper pat_disable(). It is wrapped under an ifdef but since that code cannot run unless PAT was enabled its not required to wrap it with ifdefs, unwrap that. Likewise, since "nopat" doesn't really change non-PAT systems just remove that ifdef as well. Although we could add and use an early_param_off(), these helpers don't use __read_mostly but we want to keep __read_mostly for __pat_enabled as this is a hot path -- upon boot, for instance, a simple guest may see ~4k accesses to pat_enabled(). Since __read_mostly early boot params are not that common we don't add a helper for them just yet. Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Doug Ledford <dledford@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kyle McMartin <kyle@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1430425520-22275-3-git-send-email-mcgrof@do-not-panic.com Link: http://lkml.kernel.org/r/1432628901-18044-13-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-26 08:28:15 +00:00
return !!__pat_enabled;
}
EXPORT_SYMBOL_GPL(pat_enabled);
int pat_debug_enable;
static int __init pat_debug_setup(char *str)
{
pat_debug_enable = 1;
return 0;
}
__setup("debugpat", pat_debug_setup);
#ifdef CONFIG_X86_PAT
/*
* X86 PAT uses page flags WC and Uncached together to keep track of
* memory type of pages that have backing page struct. X86 PAT supports 3
* different memory types, _PAGE_CACHE_MODE_WB, _PAGE_CACHE_MODE_WC and
* _PAGE_CACHE_MODE_UC_MINUS and fourth state where page's memory type has not
* been changed from its default (value of -1 used to denote this).
* Note we do not support _PAGE_CACHE_MODE_UC here.
*/
#define _PGMT_DEFAULT 0
#define _PGMT_WC (1UL << PG_arch_1)
#define _PGMT_UC_MINUS (1UL << PG_uncached)
#define _PGMT_WB (1UL << PG_uncached | 1UL << PG_arch_1)
#define _PGMT_MASK (1UL << PG_uncached | 1UL << PG_arch_1)
#define _PGMT_CLEAR_MASK (~_PGMT_MASK)
static inline enum page_cache_mode get_page_memtype(struct page *pg)
{
unsigned long pg_flags = pg->flags & _PGMT_MASK;
if (pg_flags == _PGMT_DEFAULT)
return -1;
else if (pg_flags == _PGMT_WC)
return _PAGE_CACHE_MODE_WC;
else if (pg_flags == _PGMT_UC_MINUS)
return _PAGE_CACHE_MODE_UC_MINUS;
else
return _PAGE_CACHE_MODE_WB;
}
static inline void set_page_memtype(struct page *pg,
enum page_cache_mode memtype)
{
unsigned long memtype_flags;
unsigned long old_flags;
unsigned long new_flags;
switch (memtype) {
case _PAGE_CACHE_MODE_WC:
memtype_flags = _PGMT_WC;
break;
case _PAGE_CACHE_MODE_UC_MINUS:
memtype_flags = _PGMT_UC_MINUS;
break;
case _PAGE_CACHE_MODE_WB:
memtype_flags = _PGMT_WB;
break;
default:
memtype_flags = _PGMT_DEFAULT;
break;
}
do {
old_flags = pg->flags;
new_flags = (old_flags & _PGMT_CLEAR_MASK) | memtype_flags;
} while (cmpxchg(&pg->flags, old_flags, new_flags) != old_flags);
}
#else
static inline enum page_cache_mode get_page_memtype(struct page *pg)
{
return -1;
}
static inline void set_page_memtype(struct page *pg,
enum page_cache_mode memtype)
{
}
#endif
enum {
PAT_UC = 0, /* uncached */
PAT_WC = 1, /* Write combining */
PAT_WT = 4, /* Write Through */
PAT_WP = 5, /* Write Protected */
PAT_WB = 6, /* Write Back (default) */
PAT_UC_MINUS = 7, /* UC, but can be overriden by MTRR */
};
#define CM(c) (_PAGE_CACHE_MODE_ ## c)
static enum page_cache_mode pat_get_cache_mode(unsigned pat_val, char *msg)
{
enum page_cache_mode cache;
char *cache_mode;
switch (pat_val) {
case PAT_UC: cache = CM(UC); cache_mode = "UC "; break;
case PAT_WC: cache = CM(WC); cache_mode = "WC "; break;
case PAT_WT: cache = CM(WT); cache_mode = "WT "; break;
case PAT_WP: cache = CM(WP); cache_mode = "WP "; break;
case PAT_WB: cache = CM(WB); cache_mode = "WB "; break;
case PAT_UC_MINUS: cache = CM(UC_MINUS); cache_mode = "UC- "; break;
default: cache = CM(WB); cache_mode = "WB "; break;
}
memcpy(msg, cache_mode, 4);
return cache;
}
#undef CM
/*
* Update the cache mode to pgprot translation tables according to PAT
* configuration.
* Using lower indices is preferred, so we start with highest index.
*/
void pat_init_cache_modes(u64 pat)
{
enum page_cache_mode cache;
char pat_msg[33];
int i;
pat_msg[32] = 0;
for (i = 7; i >= 0; i--) {
cache = pat_get_cache_mode((pat >> (i * 8)) & 7,
pat_msg + 4 * i);
update_cache_mode_entry(i, cache);
}
x86/mm/pat: Convert to pr_*() usage Use pr_info() instead of the old printk to prefix the component where things are coming from. With this readers will know exactly where the message is coming from. We use pr_* helpers but define pr_fmt to the empty string for easier grepping for those error messages. We leave the users of dprintk() in place, this will print only when the debugpat kernel parameter is enabled. We want to leave those enabled as a debug feature, but also make them use the same prefix. Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> [ Kill pr_fmt. ] Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Doug Ledford <dledford@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: cocci@systeme.lip6.fr Cc: plagnioj@jcrosoft.com Cc: tomi.valkeinen@ti.com Link: http://lkml.kernel.org/r/1430425520-22275-2-git-send-email-mcgrof@do-not-panic.com Link: http://lkml.kernel.org/r/1432628901-18044-9-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-26 08:28:11 +00:00
pr_info("x86/PAT: Configuration [0-7]: %s\n", pat_msg);
}
#define PAT(x, y) ((u64)PAT_ ## y << ((x)*8))
static void pat_bsp_init(u64 pat)
{
u64 tmp_pat;
if (!cpu_has_pat) {
pat_disable("PAT not supported by CPU.");
return;
}
if (!pat_enabled())
goto done;
rdmsrl(MSR_IA32_CR_PAT, tmp_pat);
if (!tmp_pat) {
pat_disable("PAT MSR is 0, disabled.");
return;
}
wrmsrl(MSR_IA32_CR_PAT, pat);
done:
pat_init_cache_modes(pat);
}
static void pat_ap_init(u64 pat)
{
if (!pat_enabled())
return;
if (!cpu_has_pat) {
/*
* If this happens we are on a secondary CPU, but switched to
* PAT on the boot CPU. We have no way to undo PAT.
*/
panic("x86/PAT: PAT enabled, but not supported by secondary CPU\n");
}
wrmsrl(MSR_IA32_CR_PAT, pat);
}
void pat_init(void)
{
u64 pat;
x86/mm/pat: Use 7th PAT MSR slot for Write-Through PAT type Assign Write-Through type to the PA7 slot in the PAT MSR when the processor is not affected by PAT errata. The PA7 slot is chosen to improve robustness in the presence of errata that might cause the high PAT bit to be ignored. This way a buggy PA7 slot access will hit the PA3 slot, which is UC, so at worst we lose performance without causing a correctness issue. The following Intel processors are affected by the PAT errata. Errata CPUID ---------------------------------------------------- Pentium 2, A52 family 0x6, model 0x5 Pentium 3, E27 family 0x6, model 0x7, 0x8 Pentium 3 Xenon, G26 family 0x6, model 0x7, 0x8, 0xa Pentium M, Y26 family 0x6, model 0x9 Pentium M 90nm, X9 family 0x6, model 0xd Pentium 4, N46 family 0xf, model 0x0 Instead of making sharp boundary checks, we remain conservative and exclude all Pentium 2, 3, M and 4 family processors. For those, _PAGE_CACHE_MODE_WT is redirected to UC- per the default setup in __cachemode2pte_tbl[]. Signed-off-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Elliott@hp.com Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: arnd@arndb.de Cc: hch@lst.de Cc: hmh@hmh.eng.br Cc: jgross@suse.com Cc: konrad.wilk@oracle.com Cc: linux-mm <linux-mm@kvack.org> Cc: linux-nvdimm@lists.01.org Cc: stefan.bader@canonical.com Cc: yigal@plexistor.com Link: https://lkml.kernel.org/r/1433187393-22688-2-git-send-email-toshi.kani@hp.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-04 16:55:12 +00:00
struct cpuinfo_x86 *c = &boot_cpu_data;
if (!pat_enabled()) {
/*
* No PAT. Emulate the PAT table that corresponds to the two
* cache bits, PWT (Write Through) and PCD (Cache Disable). This
* setup is the same as the BIOS default setup when the system
* has PAT but the "nopat" boot option has been specified. This
* emulated PAT table is used when MSR_IA32_CR_PAT returns 0.
*
x86/mm/pat: Use 7th PAT MSR slot for Write-Through PAT type Assign Write-Through type to the PA7 slot in the PAT MSR when the processor is not affected by PAT errata. The PA7 slot is chosen to improve robustness in the presence of errata that might cause the high PAT bit to be ignored. This way a buggy PA7 slot access will hit the PA3 slot, which is UC, so at worst we lose performance without causing a correctness issue. The following Intel processors are affected by the PAT errata. Errata CPUID ---------------------------------------------------- Pentium 2, A52 family 0x6, model 0x5 Pentium 3, E27 family 0x6, model 0x7, 0x8 Pentium 3 Xenon, G26 family 0x6, model 0x7, 0x8, 0xa Pentium M, Y26 family 0x6, model 0x9 Pentium M 90nm, X9 family 0x6, model 0xd Pentium 4, N46 family 0xf, model 0x0 Instead of making sharp boundary checks, we remain conservative and exclude all Pentium 2, 3, M and 4 family processors. For those, _PAGE_CACHE_MODE_WT is redirected to UC- per the default setup in __cachemode2pte_tbl[]. Signed-off-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Elliott@hp.com Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: arnd@arndb.de Cc: hch@lst.de Cc: hmh@hmh.eng.br Cc: jgross@suse.com Cc: konrad.wilk@oracle.com Cc: linux-mm <linux-mm@kvack.org> Cc: linux-nvdimm@lists.01.org Cc: stefan.bader@canonical.com Cc: yigal@plexistor.com Link: https://lkml.kernel.org/r/1433187393-22688-2-git-send-email-toshi.kani@hp.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-04 16:55:12 +00:00
* PTE encoding:
*
* PCD
* |PWT PAT
* || slot
* 00 0 WB : _PAGE_CACHE_MODE_WB
* 01 1 WT : _PAGE_CACHE_MODE_WT
* 10 2 UC-: _PAGE_CACHE_MODE_UC_MINUS
* 11 3 UC : _PAGE_CACHE_MODE_UC
*
* NOTE: When WC or WP is used, it is redirected to UC- per
* the default setup in __cachemode2pte_tbl[].
*/
pat = PAT(0, WB) | PAT(1, WT) | PAT(2, UC_MINUS) | PAT(3, UC) |
PAT(4, WB) | PAT(5, WT) | PAT(6, UC_MINUS) | PAT(7, UC);
x86/mm/pat: Use 7th PAT MSR slot for Write-Through PAT type Assign Write-Through type to the PA7 slot in the PAT MSR when the processor is not affected by PAT errata. The PA7 slot is chosen to improve robustness in the presence of errata that might cause the high PAT bit to be ignored. This way a buggy PA7 slot access will hit the PA3 slot, which is UC, so at worst we lose performance without causing a correctness issue. The following Intel processors are affected by the PAT errata. Errata CPUID ---------------------------------------------------- Pentium 2, A52 family 0x6, model 0x5 Pentium 3, E27 family 0x6, model 0x7, 0x8 Pentium 3 Xenon, G26 family 0x6, model 0x7, 0x8, 0xa Pentium M, Y26 family 0x6, model 0x9 Pentium M 90nm, X9 family 0x6, model 0xd Pentium 4, N46 family 0xf, model 0x0 Instead of making sharp boundary checks, we remain conservative and exclude all Pentium 2, 3, M and 4 family processors. For those, _PAGE_CACHE_MODE_WT is redirected to UC- per the default setup in __cachemode2pte_tbl[]. Signed-off-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Elliott@hp.com Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: arnd@arndb.de Cc: hch@lst.de Cc: hmh@hmh.eng.br Cc: jgross@suse.com Cc: konrad.wilk@oracle.com Cc: linux-mm <linux-mm@kvack.org> Cc: linux-nvdimm@lists.01.org Cc: stefan.bader@canonical.com Cc: yigal@plexistor.com Link: https://lkml.kernel.org/r/1433187393-22688-2-git-send-email-toshi.kani@hp.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-04 16:55:12 +00:00
} else if ((c->x86_vendor == X86_VENDOR_INTEL) &&
(((c->x86 == 0x6) && (c->x86_model <= 0xd)) ||
((c->x86 == 0xf) && (c->x86_model <= 0x6)))) {
/*
x86/mm/pat: Use 7th PAT MSR slot for Write-Through PAT type Assign Write-Through type to the PA7 slot in the PAT MSR when the processor is not affected by PAT errata. The PA7 slot is chosen to improve robustness in the presence of errata that might cause the high PAT bit to be ignored. This way a buggy PA7 slot access will hit the PA3 slot, which is UC, so at worst we lose performance without causing a correctness issue. The following Intel processors are affected by the PAT errata. Errata CPUID ---------------------------------------------------- Pentium 2, A52 family 0x6, model 0x5 Pentium 3, E27 family 0x6, model 0x7, 0x8 Pentium 3 Xenon, G26 family 0x6, model 0x7, 0x8, 0xa Pentium M, Y26 family 0x6, model 0x9 Pentium M 90nm, X9 family 0x6, model 0xd Pentium 4, N46 family 0xf, model 0x0 Instead of making sharp boundary checks, we remain conservative and exclude all Pentium 2, 3, M and 4 family processors. For those, _PAGE_CACHE_MODE_WT is redirected to UC- per the default setup in __cachemode2pte_tbl[]. Signed-off-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Elliott@hp.com Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: arnd@arndb.de Cc: hch@lst.de Cc: hmh@hmh.eng.br Cc: jgross@suse.com Cc: konrad.wilk@oracle.com Cc: linux-mm <linux-mm@kvack.org> Cc: linux-nvdimm@lists.01.org Cc: stefan.bader@canonical.com Cc: yigal@plexistor.com Link: https://lkml.kernel.org/r/1433187393-22688-2-git-send-email-toshi.kani@hp.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-04 16:55:12 +00:00
* PAT support with the lower four entries. Intel Pentium 2,
* 3, M, and 4 are affected by PAT errata, which makes the
* upper four entries unusable. To be on the safe side, we don't
* use those.
*
* PTE encoding:
* PAT
* |PCD
x86/mm/pat: Use 7th PAT MSR slot for Write-Through PAT type Assign Write-Through type to the PA7 slot in the PAT MSR when the processor is not affected by PAT errata. The PA7 slot is chosen to improve robustness in the presence of errata that might cause the high PAT bit to be ignored. This way a buggy PA7 slot access will hit the PA3 slot, which is UC, so at worst we lose performance without causing a correctness issue. The following Intel processors are affected by the PAT errata. Errata CPUID ---------------------------------------------------- Pentium 2, A52 family 0x6, model 0x5 Pentium 3, E27 family 0x6, model 0x7, 0x8 Pentium 3 Xenon, G26 family 0x6, model 0x7, 0x8, 0xa Pentium M, Y26 family 0x6, model 0x9 Pentium M 90nm, X9 family 0x6, model 0xd Pentium 4, N46 family 0xf, model 0x0 Instead of making sharp boundary checks, we remain conservative and exclude all Pentium 2, 3, M and 4 family processors. For those, _PAGE_CACHE_MODE_WT is redirected to UC- per the default setup in __cachemode2pte_tbl[]. Signed-off-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Elliott@hp.com Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: arnd@arndb.de Cc: hch@lst.de Cc: hmh@hmh.eng.br Cc: jgross@suse.com Cc: konrad.wilk@oracle.com Cc: linux-mm <linux-mm@kvack.org> Cc: linux-nvdimm@lists.01.org Cc: stefan.bader@canonical.com Cc: yigal@plexistor.com Link: https://lkml.kernel.org/r/1433187393-22688-2-git-send-email-toshi.kani@hp.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-04 16:55:12 +00:00
* ||PWT PAT
* ||| slot
* 000 0 WB : _PAGE_CACHE_MODE_WB
* 001 1 WC : _PAGE_CACHE_MODE_WC
* 010 2 UC-: _PAGE_CACHE_MODE_UC_MINUS
* 011 3 UC : _PAGE_CACHE_MODE_UC
* PAT bit unused
x86/mm/pat: Use 7th PAT MSR slot for Write-Through PAT type Assign Write-Through type to the PA7 slot in the PAT MSR when the processor is not affected by PAT errata. The PA7 slot is chosen to improve robustness in the presence of errata that might cause the high PAT bit to be ignored. This way a buggy PA7 slot access will hit the PA3 slot, which is UC, so at worst we lose performance without causing a correctness issue. The following Intel processors are affected by the PAT errata. Errata CPUID ---------------------------------------------------- Pentium 2, A52 family 0x6, model 0x5 Pentium 3, E27 family 0x6, model 0x7, 0x8 Pentium 3 Xenon, G26 family 0x6, model 0x7, 0x8, 0xa Pentium M, Y26 family 0x6, model 0x9 Pentium M 90nm, X9 family 0x6, model 0xd Pentium 4, N46 family 0xf, model 0x0 Instead of making sharp boundary checks, we remain conservative and exclude all Pentium 2, 3, M and 4 family processors. For those, _PAGE_CACHE_MODE_WT is redirected to UC- per the default setup in __cachemode2pte_tbl[]. Signed-off-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Elliott@hp.com Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: arnd@arndb.de Cc: hch@lst.de Cc: hmh@hmh.eng.br Cc: jgross@suse.com Cc: konrad.wilk@oracle.com Cc: linux-mm <linux-mm@kvack.org> Cc: linux-nvdimm@lists.01.org Cc: stefan.bader@canonical.com Cc: yigal@plexistor.com Link: https://lkml.kernel.org/r/1433187393-22688-2-git-send-email-toshi.kani@hp.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-04 16:55:12 +00:00
*
* NOTE: When WT or WP is used, it is redirected to UC- per
* the default setup in __cachemode2pte_tbl[].
*/
pat = PAT(0, WB) | PAT(1, WC) | PAT(2, UC_MINUS) | PAT(3, UC) |
PAT(4, WB) | PAT(5, WC) | PAT(6, UC_MINUS) | PAT(7, UC);
x86/mm/pat: Use 7th PAT MSR slot for Write-Through PAT type Assign Write-Through type to the PA7 slot in the PAT MSR when the processor is not affected by PAT errata. The PA7 slot is chosen to improve robustness in the presence of errata that might cause the high PAT bit to be ignored. This way a buggy PA7 slot access will hit the PA3 slot, which is UC, so at worst we lose performance without causing a correctness issue. The following Intel processors are affected by the PAT errata. Errata CPUID ---------------------------------------------------- Pentium 2, A52 family 0x6, model 0x5 Pentium 3, E27 family 0x6, model 0x7, 0x8 Pentium 3 Xenon, G26 family 0x6, model 0x7, 0x8, 0xa Pentium M, Y26 family 0x6, model 0x9 Pentium M 90nm, X9 family 0x6, model 0xd Pentium 4, N46 family 0xf, model 0x0 Instead of making sharp boundary checks, we remain conservative and exclude all Pentium 2, 3, M and 4 family processors. For those, _PAGE_CACHE_MODE_WT is redirected to UC- per the default setup in __cachemode2pte_tbl[]. Signed-off-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Elliott@hp.com Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: arnd@arndb.de Cc: hch@lst.de Cc: hmh@hmh.eng.br Cc: jgross@suse.com Cc: konrad.wilk@oracle.com Cc: linux-mm <linux-mm@kvack.org> Cc: linux-nvdimm@lists.01.org Cc: stefan.bader@canonical.com Cc: yigal@plexistor.com Link: https://lkml.kernel.org/r/1433187393-22688-2-git-send-email-toshi.kani@hp.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-04 16:55:12 +00:00
} else {
/*
* Full PAT support. We put WT in slot 7 to improve
* robustness in the presence of errata that might cause
* the high PAT bit to be ignored. This way, a buggy slot 7
* access will hit slot 3, and slot 3 is UC, so at worst
* we lose performance without causing a correctness issue.
* Pentium 4 erratum N46 is an example for such an erratum,
* although we try not to use PAT at all on affected CPUs.
*
* PTE encoding:
* PAT
* |PCD
* ||PWT PAT
* ||| slot
* 000 0 WB : _PAGE_CACHE_MODE_WB
* 001 1 WC : _PAGE_CACHE_MODE_WC
* 010 2 UC-: _PAGE_CACHE_MODE_UC_MINUS
* 011 3 UC : _PAGE_CACHE_MODE_UC
* 100 4 WB : Reserved
* 101 5 WC : Reserved
* 110 6 UC-: Reserved
* 111 7 WT : _PAGE_CACHE_MODE_WT
*
* The reserved slots are unused, but mapped to their
* corresponding types in the presence of PAT errata.
*/
pat = PAT(0, WB) | PAT(1, WC) | PAT(2, UC_MINUS) | PAT(3, UC) |
PAT(4, WB) | PAT(5, WC) | PAT(6, UC_MINUS) | PAT(7, WT);
}
if (!boot_cpu_done) {
pat_bsp_init(pat);
boot_cpu_done = true;
} else {
pat_ap_init(pat);
}
}
#undef PAT
static DEFINE_SPINLOCK(memtype_lock); /* protects memtype accesses */
/*
* Does intersection of PAT memory type and MTRR memory type and returns
* the resulting memory type as PAT understands it.
* (Type in pat and mtrr will not have same value)
* The intersection is based on "Effective Memory Type" tables in IA-32
* SDM vol 3a
*/
static unsigned long pat_x_mtrr_type(u64 start, u64 end,
enum page_cache_mode req_type)
{
x86: fix Xorg crash with xf86MapVidMem error Clarify the usage of mtrr_lookup() in PAT code, and to make PAT code resilient to mtrr lookup problems. Specifically, pat_x_mtrr_type() is restructured to highlight, under what conditions we look for mtrr hint. pat_x_mtrr_type() uses a default type when there are any errors in mtrr lookup (still maintaining the pat consistency). And, reserve_memtype() highlights its usage ot mtrr_lookup for request type of '-1' and also defaults in a sane way on any mtrr lookup failure. pat.c looks at mtrr type of a range to get a hint on what mapping type to request when user/API: (1) hasn't specified any type (/dev/mem mapping) and we do not want to take performance hit by always mapping UC_MINUS. This will be the case for /dev/mem mappings used to map BIOS area or ACPI region which are WB'able. In this case, as long as MTRR is not WB, PAT will request UC_MINUS for such mappings. (2) user/API requests WB mapping while in reality MTRR may have UC or WC. In this case, PAT can map as WB (without checking MTRR) and still effective type will be UC or WC. But, a subsequent request to map same region as UC or WC may fail, as the region will get trackked as WB in PAT list. Looking at MTRR hint helps us to track based on effective type rather than what user requested. Again, here mtrr_lookup is only used as hint and we fallback to WB mapping (as requested by user) as default. In both cases, after using the mtrr hint, we still go through the memtype list to make sure there are no inconsistencies among multiple users. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Tested-by: Rufus & Azrael <rufus-azrael@numericable.fr> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-29 19:01:44 +00:00
/*
* Look for MTRR hint to get the effective type in case where PAT
* request is for WB.
*/
if (req_type == _PAGE_CACHE_MODE_WB) {
x86/mm/mtrr: Enhance MTRR checks in kernel mapping helpers This patch adds the argument 'uniform' to mtrr_type_lookup(), which gets set to 1 when a given range is covered uniformly by MTRRs, i.e. the range is fully covered by a single MTRR entry or the default type. Change pud_set_huge() and pmd_set_huge() to honor the 'uniform' flag to see if it is safe to create a huge page mapping in the range. This allows them to create a huge page mapping in a range covered by a single MTRR entry of any memory type. It also detects a non-optimal request properly. They continue to check with the WB type since it does not effectively change the uniform mapping even if a request spans multiple MTRR entries. pmd_set_huge() logs a warning message to a non-optimal request so that driver writers will be aware of such a case. Drivers should make a mapping request aligned to a single MTRR entry when the range is covered by MTRRs. Signed-off-by: Toshi Kani <toshi.kani@hp.com> [ Realign, flesh out comments, improve warning message. ] Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Elliott@hp.com Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dave.hansen@intel.com Cc: linux-mm <linux-mm@kvack.org> Cc: pebolle@tiscali.nl Link: http://lkml.kernel.org/r/1431714237-880-7-git-send-email-toshi.kani@hp.com Link: http://lkml.kernel.org/r/1432628901-18044-8-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-26 08:28:10 +00:00
u8 mtrr_type, uniform;
x86/mm/mtrr: Enhance MTRR checks in kernel mapping helpers This patch adds the argument 'uniform' to mtrr_type_lookup(), which gets set to 1 when a given range is covered uniformly by MTRRs, i.e. the range is fully covered by a single MTRR entry or the default type. Change pud_set_huge() and pmd_set_huge() to honor the 'uniform' flag to see if it is safe to create a huge page mapping in the range. This allows them to create a huge page mapping in a range covered by a single MTRR entry of any memory type. It also detects a non-optimal request properly. They continue to check with the WB type since it does not effectively change the uniform mapping even if a request spans multiple MTRR entries. pmd_set_huge() logs a warning message to a non-optimal request so that driver writers will be aware of such a case. Drivers should make a mapping request aligned to a single MTRR entry when the range is covered by MTRRs. Signed-off-by: Toshi Kani <toshi.kani@hp.com> [ Realign, flesh out comments, improve warning message. ] Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Elliott@hp.com Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dave.hansen@intel.com Cc: linux-mm <linux-mm@kvack.org> Cc: pebolle@tiscali.nl Link: http://lkml.kernel.org/r/1431714237-880-7-git-send-email-toshi.kani@hp.com Link: http://lkml.kernel.org/r/1432628901-18044-8-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-26 08:28:10 +00:00
mtrr_type = mtrr_type_lookup(start, end, &uniform);
if (mtrr_type != MTRR_TYPE_WRBACK)
return _PAGE_CACHE_MODE_UC_MINUS;
return _PAGE_CACHE_MODE_WB;
}
return req_type;
}
struct pagerange_state {
unsigned long cur_pfn;
int ram;
int not_ram;
};
static int
pagerange_is_ram_callback(unsigned long initial_pfn, unsigned long total_nr_pages, void *arg)
{
struct pagerange_state *state = arg;
state->not_ram |= initial_pfn > state->cur_pfn;
state->ram |= total_nr_pages > 0;
state->cur_pfn = initial_pfn + total_nr_pages;
return state->ram && state->not_ram;
}
static int pat_pagerange_is_ram(resource_size_t start, resource_size_t end)
{
int ret = 0;
unsigned long start_pfn = start >> PAGE_SHIFT;
unsigned long end_pfn = (end + PAGE_SIZE - 1) >> PAGE_SHIFT;
struct pagerange_state state = {start_pfn, 0, 0};
/*
* For legacy reasons, physical address range in the legacy ISA
* region is tracked as non-RAM. This will allow users of
* /dev/mem to map portions of legacy ISA region, even when
* some of those portions are listed(or not even listed) with
* different e820 types(RAM/reserved/..)
*/
if (start_pfn < ISA_END_ADDRESS >> PAGE_SHIFT)
start_pfn = ISA_END_ADDRESS >> PAGE_SHIFT;
if (start_pfn < end_pfn) {
ret = walk_system_ram_range(start_pfn, end_pfn - start_pfn,
&state, pagerange_is_ram_callback);
}
return (ret > 0) ? -1 : (state.ram ? 1 : 0);
}
/*
* For RAM pages, we use page flags to mark the pages with appropriate type.
* The page flags are limited to three types, WB, WC and UC-. WT and WP requests
* fail with -EINVAL, and UC gets redirected to UC-.
*
* Here we do two passes:
* - Find the memtype of all the pages in the range, look for any conflicts.
* - In case of no conflicts, set the new memtype for pages in the range.
*/
static int reserve_ram_pages_type(u64 start, u64 end,
enum page_cache_mode req_type,
enum page_cache_mode *new_type)
{
struct page *page;
u64 pfn;
if ((req_type == _PAGE_CACHE_MODE_WT) ||
(req_type == _PAGE_CACHE_MODE_WP)) {
if (new_type)
*new_type = _PAGE_CACHE_MODE_UC_MINUS;
return -EINVAL;
}
if (req_type == _PAGE_CACHE_MODE_UC) {
/* We do not support strong UC */
WARN_ON_ONCE(1);
req_type = _PAGE_CACHE_MODE_UC_MINUS;
}
for (pfn = (start >> PAGE_SHIFT); pfn < (end >> PAGE_SHIFT); ++pfn) {
enum page_cache_mode type;
page = pfn_to_page(pfn);
type = get_page_memtype(page);
if (type != -1) {
x86/mm/pat: Convert to pr_*() usage Use pr_info() instead of the old printk to prefix the component where things are coming from. With this readers will know exactly where the message is coming from. We use pr_* helpers but define pr_fmt to the empty string for easier grepping for those error messages. We leave the users of dprintk() in place, this will print only when the debugpat kernel parameter is enabled. We want to leave those enabled as a debug feature, but also make them use the same prefix. Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> [ Kill pr_fmt. ] Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Doug Ledford <dledford@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: cocci@systeme.lip6.fr Cc: plagnioj@jcrosoft.com Cc: tomi.valkeinen@ti.com Link: http://lkml.kernel.org/r/1430425520-22275-2-git-send-email-mcgrof@do-not-panic.com Link: http://lkml.kernel.org/r/1432628901-18044-9-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-26 08:28:11 +00:00
pr_info("x86/PAT: reserve_ram_pages_type failed [mem %#010Lx-%#010Lx], track 0x%x, req 0x%x\n",
start, end - 1, type, req_type);
if (new_type)
*new_type = type;
return -EBUSY;
}
}
if (new_type)
*new_type = req_type;
for (pfn = (start >> PAGE_SHIFT); pfn < (end >> PAGE_SHIFT); ++pfn) {
page = pfn_to_page(pfn);
set_page_memtype(page, req_type);
}
return 0;
}
static int free_ram_pages_type(u64 start, u64 end)
{
struct page *page;
u64 pfn;
for (pfn = (start >> PAGE_SHIFT); pfn < (end >> PAGE_SHIFT); ++pfn) {
page = pfn_to_page(pfn);
set_page_memtype(page, -1);
}
return 0;
}
/*
* req_type typically has one of the:
* - _PAGE_CACHE_MODE_WB
* - _PAGE_CACHE_MODE_WC
* - _PAGE_CACHE_MODE_UC_MINUS
* - _PAGE_CACHE_MODE_UC
* - _PAGE_CACHE_MODE_WT
*
* If new_type is NULL, function will return an error if it cannot reserve the
* region with req_type. If new_type is non-NULL, function will return
* available type in new_type in case of no error. In case of any error
* it will return a negative return value.
*/
int reserve_memtype(u64 start, u64 end, enum page_cache_mode req_type,
enum page_cache_mode *new_type)
{
struct memtype *new;
enum page_cache_mode actual_type;
int is_range_ram;
int err = 0;
BUG_ON(start >= end); /* end is exclusive */
x86/mm/pat: Wrap pat_enabled into a function API We use pat_enabled in x86-specific code to see if PAT is enabled or not but we're granting full access to it even though readers do not need to set it. If, for instance, we granted access to it to modules later they then could override the variable setting... no bueno. This renames pat_enabled to a new static variable __pat_enabled. Folks are redirected to use pat_enabled() now. Code that sets this can only be internal to pat.c. Apart from the early kernel parameter "nopat" to disable PAT, we also have a few cases that disable it later and make use of a helper pat_disable(). It is wrapped under an ifdef but since that code cannot run unless PAT was enabled its not required to wrap it with ifdefs, unwrap that. Likewise, since "nopat" doesn't really change non-PAT systems just remove that ifdef as well. Although we could add and use an early_param_off(), these helpers don't use __read_mostly but we want to keep __read_mostly for __pat_enabled as this is a hot path -- upon boot, for instance, a simple guest may see ~4k accesses to pat_enabled(). Since __read_mostly early boot params are not that common we don't add a helper for them just yet. Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Doug Ledford <dledford@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kyle McMartin <kyle@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1430425520-22275-3-git-send-email-mcgrof@do-not-panic.com Link: http://lkml.kernel.org/r/1432628901-18044-13-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-26 08:28:15 +00:00
if (!pat_enabled()) {
/* This is identical to page table setting without PAT */
if (new_type)
*new_type = req_type;
return 0;
}
/* Low ISA region is always mapped WB in page table. No need to track */
if (x86_platform.is_untracked_pat_range(start, end)) {
if (new_type)
*new_type = _PAGE_CACHE_MODE_WB;
return 0;
}
/*
* Call mtrr_lookup to get the type hint. This is an
* optimization for /dev/mem mmap'ers into WB memory (BIOS
* tools and ACPI tools). Use WB request for WB memory and use
* UC_MINUS otherwise.
*/
actual_type = pat_x_mtrr_type(start, end, req_type);
if (new_type)
*new_type = actual_type;
is_range_ram = pat_pagerange_is_ram(start, end);
if (is_range_ram == 1) {
err = reserve_ram_pages_type(start, end, req_type, new_type);
return err;
} else if (is_range_ram < 0) {
return -EINVAL;
}
new = kzalloc(sizeof(struct memtype), GFP_KERNEL);
if (!new)
return -ENOMEM;
new->start = start;
new->end = end;
new->type = actual_type;
spin_lock(&memtype_lock);
err = rbt_memtype_check_insert(new, new_type);
if (err) {
x86/mm/pat: Convert to pr_*() usage Use pr_info() instead of the old printk to prefix the component where things are coming from. With this readers will know exactly where the message is coming from. We use pr_* helpers but define pr_fmt to the empty string for easier grepping for those error messages. We leave the users of dprintk() in place, this will print only when the debugpat kernel parameter is enabled. We want to leave those enabled as a debug feature, but also make them use the same prefix. Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> [ Kill pr_fmt. ] Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Doug Ledford <dledford@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: cocci@systeme.lip6.fr Cc: plagnioj@jcrosoft.com Cc: tomi.valkeinen@ti.com Link: http://lkml.kernel.org/r/1430425520-22275-2-git-send-email-mcgrof@do-not-panic.com Link: http://lkml.kernel.org/r/1432628901-18044-9-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-26 08:28:11 +00:00
pr_info("x86/PAT: reserve_memtype failed [mem %#010Lx-%#010Lx], track %s, req %s\n",
start, end - 1,
cattr_name(new->type), cattr_name(req_type));
kfree(new);
spin_unlock(&memtype_lock);
return err;
}
spin_unlock(&memtype_lock);
dprintk("reserve_memtype added [mem %#010Lx-%#010Lx], track %s, req %s, ret %s\n",
start, end - 1, cattr_name(new->type), cattr_name(req_type),
new_type ? cattr_name(*new_type) : "-");
return err;
}
int free_memtype(u64 start, u64 end)
{
int err = -EINVAL;
int is_range_ram;
struct memtype *entry;
x86/mm/pat: Wrap pat_enabled into a function API We use pat_enabled in x86-specific code to see if PAT is enabled or not but we're granting full access to it even though readers do not need to set it. If, for instance, we granted access to it to modules later they then could override the variable setting... no bueno. This renames pat_enabled to a new static variable __pat_enabled. Folks are redirected to use pat_enabled() now. Code that sets this can only be internal to pat.c. Apart from the early kernel parameter "nopat" to disable PAT, we also have a few cases that disable it later and make use of a helper pat_disable(). It is wrapped under an ifdef but since that code cannot run unless PAT was enabled its not required to wrap it with ifdefs, unwrap that. Likewise, since "nopat" doesn't really change non-PAT systems just remove that ifdef as well. Although we could add and use an early_param_off(), these helpers don't use __read_mostly but we want to keep __read_mostly for __pat_enabled as this is a hot path -- upon boot, for instance, a simple guest may see ~4k accesses to pat_enabled(). Since __read_mostly early boot params are not that common we don't add a helper for them just yet. Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Doug Ledford <dledford@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kyle McMartin <kyle@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1430425520-22275-3-git-send-email-mcgrof@do-not-panic.com Link: http://lkml.kernel.org/r/1432628901-18044-13-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-26 08:28:15 +00:00
if (!pat_enabled())
return 0;
/* Low ISA region is always mapped WB. No need to track */
if (x86_platform.is_untracked_pat_range(start, end))
return 0;
is_range_ram = pat_pagerange_is_ram(start, end);
if (is_range_ram == 1) {
err = free_ram_pages_type(start, end);
return err;
} else if (is_range_ram < 0) {
return -EINVAL;
}
spin_lock(&memtype_lock);
entry = rbt_memtype_erase(start, end);
spin_unlock(&memtype_lock);
if (!entry) {
x86/mm/pat: Convert to pr_*() usage Use pr_info() instead of the old printk to prefix the component where things are coming from. With this readers will know exactly where the message is coming from. We use pr_* helpers but define pr_fmt to the empty string for easier grepping for those error messages. We leave the users of dprintk() in place, this will print only when the debugpat kernel parameter is enabled. We want to leave those enabled as a debug feature, but also make them use the same prefix. Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> [ Kill pr_fmt. ] Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Doug Ledford <dledford@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: cocci@systeme.lip6.fr Cc: plagnioj@jcrosoft.com Cc: tomi.valkeinen@ti.com Link: http://lkml.kernel.org/r/1430425520-22275-2-git-send-email-mcgrof@do-not-panic.com Link: http://lkml.kernel.org/r/1432628901-18044-9-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-26 08:28:11 +00:00
pr_info("x86/PAT: %s:%d freeing invalid memtype [mem %#010Lx-%#010Lx]\n",
current->comm, current->pid, start, end - 1);
return -EINVAL;
}
kfree(entry);
dprintk("free_memtype request [mem %#010Lx-%#010Lx]\n", start, end - 1);
return 0;
}
/**
* lookup_memtype - Looksup the memory type for a physical address
* @paddr: physical address of which memory type needs to be looked up
*
* Only to be called when PAT is enabled
*
* Returns _PAGE_CACHE_MODE_WB, _PAGE_CACHE_MODE_WC, _PAGE_CACHE_MODE_UC_MINUS
* or _PAGE_CACHE_MODE_UC
*/
static enum page_cache_mode lookup_memtype(u64 paddr)
{
enum page_cache_mode rettype = _PAGE_CACHE_MODE_WB;
struct memtype *entry;
if (x86_platform.is_untracked_pat_range(paddr, paddr + PAGE_SIZE))
return rettype;
if (pat_pagerange_is_ram(paddr, paddr + PAGE_SIZE)) {
struct page *page;
page = pfn_to_page(paddr >> PAGE_SHIFT);
rettype = get_page_memtype(page);
/*
* -1 from get_page_memtype() implies RAM page is in its
* default state and not reserved, and hence of type WB
*/
if (rettype == -1)
rettype = _PAGE_CACHE_MODE_WB;
return rettype;
}
spin_lock(&memtype_lock);
entry = rbt_memtype_lookup(paddr);
if (entry != NULL)
rettype = entry->type;
else
rettype = _PAGE_CACHE_MODE_UC_MINUS;
spin_unlock(&memtype_lock);
return rettype;
}
/**
* io_reserve_memtype - Request a memory type mapping for a region of memory
* @start: start (physical address) of the region
* @end: end (physical address) of the region
* @type: A pointer to memtype, with requested type. On success, requested
* or any other compatible type that was available for the region is returned
*
* On success, returns 0
* On failure, returns non-zero
*/
int io_reserve_memtype(resource_size_t start, resource_size_t end,
enum page_cache_mode *type)
{
resource_size_t size = end - start;
enum page_cache_mode req_type = *type;
enum page_cache_mode new_type;
int ret;
WARN_ON_ONCE(iomem_map_sanity_check(start, size));
ret = reserve_memtype(start, end, req_type, &new_type);
if (ret)
goto out_err;
if (!is_new_memtype_allowed(start, size, req_type, new_type))
goto out_free;
if (kernel_map_sync_memtype(start, size, new_type) < 0)
goto out_free;
*type = new_type;
return 0;
out_free:
free_memtype(start, end);
ret = -EBUSY;
out_err:
return ret;
}
/**
* io_free_memtype - Release a memory type mapping for a region of memory
* @start: start (physical address) of the region
* @end: end (physical address) of the region
*/
void io_free_memtype(resource_size_t start, resource_size_t end)
{
free_memtype(start, end);
}
pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
unsigned long size, pgprot_t vma_prot)
{
return vma_prot;
}
#ifdef CONFIG_STRICT_DEVMEM
/* This check is done in drivers/char/mem.c in case of STRICT_DEVMEM */
static inline int range_is_allowed(unsigned long pfn, unsigned long size)
{
return 1;
}
#else
/* This check is needed to avoid cache aliasing when PAT is enabled */
static inline int range_is_allowed(unsigned long pfn, unsigned long size)
{
u64 from = ((u64)pfn) << PAGE_SHIFT;
u64 to = from + size;
u64 cursor = from;
x86/mm/pat: Wrap pat_enabled into a function API We use pat_enabled in x86-specific code to see if PAT is enabled or not but we're granting full access to it even though readers do not need to set it. If, for instance, we granted access to it to modules later they then could override the variable setting... no bueno. This renames pat_enabled to a new static variable __pat_enabled. Folks are redirected to use pat_enabled() now. Code that sets this can only be internal to pat.c. Apart from the early kernel parameter "nopat" to disable PAT, we also have a few cases that disable it later and make use of a helper pat_disable(). It is wrapped under an ifdef but since that code cannot run unless PAT was enabled its not required to wrap it with ifdefs, unwrap that. Likewise, since "nopat" doesn't really change non-PAT systems just remove that ifdef as well. Although we could add and use an early_param_off(), these helpers don't use __read_mostly but we want to keep __read_mostly for __pat_enabled as this is a hot path -- upon boot, for instance, a simple guest may see ~4k accesses to pat_enabled(). Since __read_mostly early boot params are not that common we don't add a helper for them just yet. Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Doug Ledford <dledford@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kyle McMartin <kyle@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1430425520-22275-3-git-send-email-mcgrof@do-not-panic.com Link: http://lkml.kernel.org/r/1432628901-18044-13-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-26 08:28:15 +00:00
if (!pat_enabled())
return 1;
while (cursor < to) {
if (!devmem_is_allowed(pfn)) {
x86/mm/pat: Convert to pr_*() usage Use pr_info() instead of the old printk to prefix the component where things are coming from. With this readers will know exactly where the message is coming from. We use pr_* helpers but define pr_fmt to the empty string for easier grepping for those error messages. We leave the users of dprintk() in place, this will print only when the debugpat kernel parameter is enabled. We want to leave those enabled as a debug feature, but also make them use the same prefix. Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> [ Kill pr_fmt. ] Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Doug Ledford <dledford@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: cocci@systeme.lip6.fr Cc: plagnioj@jcrosoft.com Cc: tomi.valkeinen@ti.com Link: http://lkml.kernel.org/r/1430425520-22275-2-git-send-email-mcgrof@do-not-panic.com Link: http://lkml.kernel.org/r/1432628901-18044-9-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-26 08:28:11 +00:00
pr_info("x86/PAT: Program %s tried to access /dev/mem between [mem %#010Lx-%#010Lx], PAT prevents it\n",
current->comm, from, to - 1);
return 0;
}
cursor += PAGE_SIZE;
pfn++;
}
return 1;
}
#endif /* CONFIG_STRICT_DEVMEM */
int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
unsigned long size, pgprot_t *vma_prot)
{
enum page_cache_mode pcm = _PAGE_CACHE_MODE_WB;
if (!range_is_allowed(pfn, size))
return 0;
vfs: Implement proper O_SYNC semantics While Linux provided an O_SYNC flag basically since day 1, it took until Linux 2.4.0-test12pre2 to actually get it implemented for filesystems, since that day we had generic_osync_around with only minor changes and the great "For now, when the user asks for O_SYNC, we'll actually give O_DSYNC" comment. This patch intends to actually give us real O_SYNC semantics in addition to the O_DSYNC semantics. After Jan's O_SYNC patches which are required before this patch it's actually surprisingly simple, we just need to figure out when to set the datasync flag to vfs_fsync_range and when not. This patch renames the existing O_SYNC flag to O_DSYNC while keeping it's numerical value to keep binary compatibility, and adds a new real O_SYNC flag. To guarantee backwards compatiblity it is defined as expanding to both the O_DSYNC and the new additional binary flag (__O_SYNC) to make sure we are backwards-compatible when compiled against the new headers. This also means that all places that don't care about the differences can just check O_DSYNC and get the right behaviour for O_SYNC, too - only places that actuall care need to check __O_SYNC in addition. Drivers and network filesystems have been updated in a fail safe way to always do the full sync magic if O_DSYNC is set. The few places setting O_SYNC for lower layers are kept that way for now to stay failsafe. We enforce that O_DSYNC is set when __O_SYNC is set early in the open path to make sure we always get these sane options. Note that parisc really screwed up their headers as they already define a O_DSYNC that has always been a no-op. We try to repair it by using it for the new O_DSYNC and redefinining O_SYNC to send both the traditional O_SYNC numerical value _and_ the O_DSYNC one. Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andreas Dilger <adilger@sun.com> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jan Kara <jack@suse.cz>
2009-10-27 10:05:28 +00:00
if (file->f_flags & O_DSYNC)
pcm = _PAGE_CACHE_MODE_UC_MINUS;
#ifdef CONFIG_X86_32
/*
* On the PPro and successors, the MTRRs are used to set
* memory types for physical addresses outside main memory,
* so blindly setting UC or PWT on those pages is wrong.
* For Pentiums and earlier, the surround logic should disable
* caching for the high addresses through the KEN pin, but
* we maintain the tradition of paranoia in this code.
*/
x86/mm/pat: Wrap pat_enabled into a function API We use pat_enabled in x86-specific code to see if PAT is enabled or not but we're granting full access to it even though readers do not need to set it. If, for instance, we granted access to it to modules later they then could override the variable setting... no bueno. This renames pat_enabled to a new static variable __pat_enabled. Folks are redirected to use pat_enabled() now. Code that sets this can only be internal to pat.c. Apart from the early kernel parameter "nopat" to disable PAT, we also have a few cases that disable it later and make use of a helper pat_disable(). It is wrapped under an ifdef but since that code cannot run unless PAT was enabled its not required to wrap it with ifdefs, unwrap that. Likewise, since "nopat" doesn't really change non-PAT systems just remove that ifdef as well. Although we could add and use an early_param_off(), these helpers don't use __read_mostly but we want to keep __read_mostly for __pat_enabled as this is a hot path -- upon boot, for instance, a simple guest may see ~4k accesses to pat_enabled(). Since __read_mostly early boot params are not that common we don't add a helper for them just yet. Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Doug Ledford <dledford@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kyle McMartin <kyle@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1430425520-22275-3-git-send-email-mcgrof@do-not-panic.com Link: http://lkml.kernel.org/r/1432628901-18044-13-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-26 08:28:15 +00:00
if (!pat_enabled() &&
!(boot_cpu_has(X86_FEATURE_MTRR) ||
boot_cpu_has(X86_FEATURE_K6_MTRR) ||
boot_cpu_has(X86_FEATURE_CYRIX_ARR) ||
boot_cpu_has(X86_FEATURE_CENTAUR_MCR)) &&
(pfn << PAGE_SHIFT) >= __pa(high_memory)) {
pcm = _PAGE_CACHE_MODE_UC;
}
#endif
*vma_prot = __pgprot((pgprot_val(*vma_prot) & ~_PAGE_CACHE_MASK) |
cachemode2protval(pcm));
return 1;
}
/*
* Change the memory type for the physial address range in kernel identity
* mapping space if that range is a part of identity map.
*/
int kernel_map_sync_memtype(u64 base, unsigned long size,
enum page_cache_mode pcm)
{
unsigned long id_sz;
if (base > __pa(high_memory-1))
return 0;
/*
* some areas in the middle of the kernel identity range
* are not mapped, like the PCI space.
*/
if (!page_is_ram(base >> PAGE_SHIFT))
return 0;
id_sz = (__pa(high_memory-1) <= base + size) ?
__pa(high_memory) - base :
size;
if (ioremap_change_attr((unsigned long)__va(base), id_sz, pcm) < 0) {
x86/mm/pat: Convert to pr_*() usage Use pr_info() instead of the old printk to prefix the component where things are coming from. With this readers will know exactly where the message is coming from. We use pr_* helpers but define pr_fmt to the empty string for easier grepping for those error messages. We leave the users of dprintk() in place, this will print only when the debugpat kernel parameter is enabled. We want to leave those enabled as a debug feature, but also make them use the same prefix. Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> [ Kill pr_fmt. ] Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Doug Ledford <dledford@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: cocci@systeme.lip6.fr Cc: plagnioj@jcrosoft.com Cc: tomi.valkeinen@ti.com Link: http://lkml.kernel.org/r/1430425520-22275-2-git-send-email-mcgrof@do-not-panic.com Link: http://lkml.kernel.org/r/1432628901-18044-9-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-26 08:28:11 +00:00
pr_info("x86/PAT: %s:%d ioremap_change_attr failed %s for [mem %#010Lx-%#010Lx]\n",
current->comm, current->pid,
cattr_name(pcm),
base, (unsigned long long)(base + size-1));
return -EINVAL;
}
return 0;
}
/*
* Internal interface to reserve a range of physical memory with prot.
* Reserved non RAM regions only and after successful reserve_memtype,
* this func also keeps identity mapping (if any) in sync with this new prot.
*/
static int reserve_pfn_range(u64 paddr, unsigned long size, pgprot_t *vma_prot,
int strict_prot)
{
int is_ram = 0;
int ret;
enum page_cache_mode want_pcm = pgprot2cachemode(*vma_prot);
enum page_cache_mode pcm = want_pcm;
is_ram = pat_pagerange_is_ram(paddr, paddr + size);
/*
* reserve_pfn_range() for RAM pages. We do not refcount to keep
* track of number of mappings of RAM pages. We can assert that
* the type requested matches the type of first page in the range.
*/
if (is_ram) {
x86/mm/pat: Wrap pat_enabled into a function API We use pat_enabled in x86-specific code to see if PAT is enabled or not but we're granting full access to it even though readers do not need to set it. If, for instance, we granted access to it to modules later they then could override the variable setting... no bueno. This renames pat_enabled to a new static variable __pat_enabled. Folks are redirected to use pat_enabled() now. Code that sets this can only be internal to pat.c. Apart from the early kernel parameter "nopat" to disable PAT, we also have a few cases that disable it later and make use of a helper pat_disable(). It is wrapped under an ifdef but since that code cannot run unless PAT was enabled its not required to wrap it with ifdefs, unwrap that. Likewise, since "nopat" doesn't really change non-PAT systems just remove that ifdef as well. Although we could add and use an early_param_off(), these helpers don't use __read_mostly but we want to keep __read_mostly for __pat_enabled as this is a hot path -- upon boot, for instance, a simple guest may see ~4k accesses to pat_enabled(). Since __read_mostly early boot params are not that common we don't add a helper for them just yet. Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Doug Ledford <dledford@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kyle McMartin <kyle@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1430425520-22275-3-git-send-email-mcgrof@do-not-panic.com Link: http://lkml.kernel.org/r/1432628901-18044-13-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-26 08:28:15 +00:00
if (!pat_enabled())
return 0;
pcm = lookup_memtype(paddr);
if (want_pcm != pcm) {
x86/mm/pat: Convert to pr_*() usage Use pr_info() instead of the old printk to prefix the component where things are coming from. With this readers will know exactly where the message is coming from. We use pr_* helpers but define pr_fmt to the empty string for easier grepping for those error messages. We leave the users of dprintk() in place, this will print only when the debugpat kernel parameter is enabled. We want to leave those enabled as a debug feature, but also make them use the same prefix. Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> [ Kill pr_fmt. ] Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Doug Ledford <dledford@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: cocci@systeme.lip6.fr Cc: plagnioj@jcrosoft.com Cc: tomi.valkeinen@ti.com Link: http://lkml.kernel.org/r/1430425520-22275-2-git-send-email-mcgrof@do-not-panic.com Link: http://lkml.kernel.org/r/1432628901-18044-9-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-26 08:28:11 +00:00
pr_warn("x86/PAT: %s:%d map pfn RAM range req %s for [mem %#010Lx-%#010Lx], got %s\n",
current->comm, current->pid,
cattr_name(want_pcm),
(unsigned long long)paddr,
(unsigned long long)(paddr + size - 1),
cattr_name(pcm));
*vma_prot = __pgprot((pgprot_val(*vma_prot) &
(~_PAGE_CACHE_MASK)) |
cachemode2protval(pcm));
}
return 0;
}
ret = reserve_memtype(paddr, paddr + size, want_pcm, &pcm);
if (ret)
return ret;
if (pcm != want_pcm) {
if (strict_prot ||
!is_new_memtype_allowed(paddr, size, want_pcm, pcm)) {
free_memtype(paddr, paddr + size);
x86/mm/pat: Convert to pr_*() usage Use pr_info() instead of the old printk to prefix the component where things are coming from. With this readers will know exactly where the message is coming from. We use pr_* helpers but define pr_fmt to the empty string for easier grepping for those error messages. We leave the users of dprintk() in place, this will print only when the debugpat kernel parameter is enabled. We want to leave those enabled as a debug feature, but also make them use the same prefix. Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> [ Kill pr_fmt. ] Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Doug Ledford <dledford@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: cocci@systeme.lip6.fr Cc: plagnioj@jcrosoft.com Cc: tomi.valkeinen@ti.com Link: http://lkml.kernel.org/r/1430425520-22275-2-git-send-email-mcgrof@do-not-panic.com Link: http://lkml.kernel.org/r/1432628901-18044-9-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-26 08:28:11 +00:00
pr_err("x86/PAT: %s:%d map pfn expected mapping type %s for [mem %#010Lx-%#010Lx], got %s\n",
current->comm, current->pid,
cattr_name(want_pcm),
(unsigned long long)paddr,
(unsigned long long)(paddr + size - 1),
cattr_name(pcm));
return -EINVAL;
}
/*
* We allow returning different type than the one requested in
* non strict case.
*/
*vma_prot = __pgprot((pgprot_val(*vma_prot) &
(~_PAGE_CACHE_MASK)) |
cachemode2protval(pcm));
}
if (kernel_map_sync_memtype(paddr, size, pcm) < 0) {
free_memtype(paddr, paddr + size);
return -EINVAL;
}
return 0;
}
/*
* Internal interface to free a range of physical memory.
* Frees non RAM regions only.
*/
static void free_pfn_range(u64 paddr, unsigned long size)
{
int is_ram;
is_ram = pat_pagerange_is_ram(paddr, paddr + size);
if (is_ram == 0)
free_memtype(paddr, paddr + size);
}
/*
x86, pat: separate the pfn attribute tracking for remap_pfn_range and vm_insert_pfn With PAT enabled, vm_insert_pfn() looks up the existing pfn memory attribute and uses it. Expectation is that the driver reserves the memory attributes for the pfn before calling vm_insert_pfn(). remap_pfn_range() (when called for the whole vma) will setup a new attribute (based on the prot argument) for the specified pfn range. This addresses the legacy usage which typically calls remap_pfn_range() with a desired memory attribute. For ranges smaller than the vma size (which is typically not the case), remap_pfn_range() will use the existing memory attribute for the pfn range. Expose two different API's for these different behaviors. track_pfn_insert() for tracking the pfn attribute set by vm_insert_pfn() and track_pfn_remap() for the remap_pfn_range(). This cleanup also prepares the ground for the track/untrack pfn vma routines to take over the ownership of setting PAT specific vm_flag in the 'vma'. [khlebnikov@openvz.org: Clear checks in track_pfn_remap()] [akpm@linux-foundation.org: tweak a few comments] Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Venkatesh Pallipadi <venki@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-08 23:28:29 +00:00
* track_pfn_copy is called when vma that is covering the pfnmap gets
* copied through copy_page_range().
*
* If the vma has a linear pfn mapping for the entire range, we get the prot
* from pte and reserve the entire vma range with single reserve_pfn_range call.
*/
x86, pat: separate the pfn attribute tracking for remap_pfn_range and vm_insert_pfn With PAT enabled, vm_insert_pfn() looks up the existing pfn memory attribute and uses it. Expectation is that the driver reserves the memory attributes for the pfn before calling vm_insert_pfn(). remap_pfn_range() (when called for the whole vma) will setup a new attribute (based on the prot argument) for the specified pfn range. This addresses the legacy usage which typically calls remap_pfn_range() with a desired memory attribute. For ranges smaller than the vma size (which is typically not the case), remap_pfn_range() will use the existing memory attribute for the pfn range. Expose two different API's for these different behaviors. track_pfn_insert() for tracking the pfn attribute set by vm_insert_pfn() and track_pfn_remap() for the remap_pfn_range(). This cleanup also prepares the ground for the track/untrack pfn vma routines to take over the ownership of setting PAT specific vm_flag in the 'vma'. [khlebnikov@openvz.org: Clear checks in track_pfn_remap()] [akpm@linux-foundation.org: tweak a few comments] Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Venkatesh Pallipadi <venki@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-08 23:28:29 +00:00
int track_pfn_copy(struct vm_area_struct *vma)
{
resource_size_t paddr;
unsigned long prot;
unsigned long vma_size = vma->vm_end - vma->vm_start;
pgprot_t pgprot;
mm, x86, pat: rework linear pfn-mmap tracking Replace the generic vma-flag VM_PFN_AT_MMAP with x86-only VM_PAT. We can toss mapping address from remap_pfn_range() into track_pfn_vma_new(), and collect all PAT-related logic together in arch/x86/. This patch also restores orignal frustration-free is_cow_mapping() check in remap_pfn_range(), as it was before commit v2.6.28-rc8-88-g3c8bb73 ("x86: PAT: store vm_pgoff for all linear_over_vma_region mappings - v3") is_linear_pfn_mapping() checks can be removed from mm/huge_memory.c, because it already handled by VM_PFNMAP in VM_NO_THP bit-mask. [suresh.b.siddha@intel.com: Reset the VM_PAT flag as part of untrack_pfn_vma()] Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Venkatesh Pallipadi <venki@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Venkatesh Pallipadi <venki@google.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-08 23:28:34 +00:00
if (vma->vm_flags & VM_PAT) {
/*
* reserve the whole chunk covered by vma. We need the
* starting address and protection from pte.
*/
if (follow_phys(vma, vma->vm_start, 0, &prot, &paddr)) {
WARN_ON_ONCE(1);
return -EINVAL;
}
pgprot = __pgprot(prot);
return reserve_pfn_range(paddr, vma_size, &pgprot, 1);
}
return 0;
}
/*
* prot is passed in as a parameter for the new mapping. If the vma has a
* linear pfn mapping for the entire range reserve the entire vma range with
* single reserve_pfn_range call.
*/
x86, pat: separate the pfn attribute tracking for remap_pfn_range and vm_insert_pfn With PAT enabled, vm_insert_pfn() looks up the existing pfn memory attribute and uses it. Expectation is that the driver reserves the memory attributes for the pfn before calling vm_insert_pfn(). remap_pfn_range() (when called for the whole vma) will setup a new attribute (based on the prot argument) for the specified pfn range. This addresses the legacy usage which typically calls remap_pfn_range() with a desired memory attribute. For ranges smaller than the vma size (which is typically not the case), remap_pfn_range() will use the existing memory attribute for the pfn range. Expose two different API's for these different behaviors. track_pfn_insert() for tracking the pfn attribute set by vm_insert_pfn() and track_pfn_remap() for the remap_pfn_range(). This cleanup also prepares the ground for the track/untrack pfn vma routines to take over the ownership of setting PAT specific vm_flag in the 'vma'. [khlebnikov@openvz.org: Clear checks in track_pfn_remap()] [akpm@linux-foundation.org: tweak a few comments] Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Venkatesh Pallipadi <venki@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-08 23:28:29 +00:00
int track_pfn_remap(struct vm_area_struct *vma, pgprot_t *prot,
mm, x86, pat: rework linear pfn-mmap tracking Replace the generic vma-flag VM_PFN_AT_MMAP with x86-only VM_PAT. We can toss mapping address from remap_pfn_range() into track_pfn_vma_new(), and collect all PAT-related logic together in arch/x86/. This patch also restores orignal frustration-free is_cow_mapping() check in remap_pfn_range(), as it was before commit v2.6.28-rc8-88-g3c8bb73 ("x86: PAT: store vm_pgoff for all linear_over_vma_region mappings - v3") is_linear_pfn_mapping() checks can be removed from mm/huge_memory.c, because it already handled by VM_PFNMAP in VM_NO_THP bit-mask. [suresh.b.siddha@intel.com: Reset the VM_PAT flag as part of untrack_pfn_vma()] Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Venkatesh Pallipadi <venki@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Venkatesh Pallipadi <venki@google.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-08 23:28:34 +00:00
unsigned long pfn, unsigned long addr, unsigned long size)
{
x86, pat: remove the dependency on 'vm_pgoff' in track/untrack pfn vma routines 'pfn' argument for track_pfn_vma_new() can be used for reserving the attribute for the pfn range. No need to depend on 'vm_pgoff' Similarly, untrack_pfn_vma() can depend on the 'pfn' argument if it is non-zero or can use follow_phys() to get the starting value of the pfn range. Also the non zero 'size' argument can be used instead of recomputing it from vma. This cleanup also prepares the ground for the track/untrack pfn vma routines to take over the ownership of setting PAT specific vm_flag in the 'vma'. [khlebnikov@openvz.org: Clear pfn to paddr conversion] Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Venkatesh Pallipadi <venki@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-08 23:28:23 +00:00
resource_size_t paddr = (resource_size_t)pfn << PAGE_SHIFT;
enum page_cache_mode pcm;
x86, pat: remove the dependency on 'vm_pgoff' in track/untrack pfn vma routines 'pfn' argument for track_pfn_vma_new() can be used for reserving the attribute for the pfn range. No need to depend on 'vm_pgoff' Similarly, untrack_pfn_vma() can depend on the 'pfn' argument if it is non-zero or can use follow_phys() to get the starting value of the pfn range. Also the non zero 'size' argument can be used instead of recomputing it from vma. This cleanup also prepares the ground for the track/untrack pfn vma routines to take over the ownership of setting PAT specific vm_flag in the 'vma'. [khlebnikov@openvz.org: Clear pfn to paddr conversion] Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Venkatesh Pallipadi <venki@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-08 23:28:23 +00:00
/* reserve the whole chunk starting from paddr */
mm, x86, pat: rework linear pfn-mmap tracking Replace the generic vma-flag VM_PFN_AT_MMAP with x86-only VM_PAT. We can toss mapping address from remap_pfn_range() into track_pfn_vma_new(), and collect all PAT-related logic together in arch/x86/. This patch also restores orignal frustration-free is_cow_mapping() check in remap_pfn_range(), as it was before commit v2.6.28-rc8-88-g3c8bb73 ("x86: PAT: store vm_pgoff for all linear_over_vma_region mappings - v3") is_linear_pfn_mapping() checks can be removed from mm/huge_memory.c, because it already handled by VM_PFNMAP in VM_NO_THP bit-mask. [suresh.b.siddha@intel.com: Reset the VM_PAT flag as part of untrack_pfn_vma()] Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Venkatesh Pallipadi <venki@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Venkatesh Pallipadi <venki@google.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-08 23:28:34 +00:00
if (addr == vma->vm_start && size == (vma->vm_end - vma->vm_start)) {
int ret;
ret = reserve_pfn_range(paddr, size, prot, 0);
if (!ret)
vma->vm_flags |= VM_PAT;
return ret;
}
x86/mm/pat: Wrap pat_enabled into a function API We use pat_enabled in x86-specific code to see if PAT is enabled or not but we're granting full access to it even though readers do not need to set it. If, for instance, we granted access to it to modules later they then could override the variable setting... no bueno. This renames pat_enabled to a new static variable __pat_enabled. Folks are redirected to use pat_enabled() now. Code that sets this can only be internal to pat.c. Apart from the early kernel parameter "nopat" to disable PAT, we also have a few cases that disable it later and make use of a helper pat_disable(). It is wrapped under an ifdef but since that code cannot run unless PAT was enabled its not required to wrap it with ifdefs, unwrap that. Likewise, since "nopat" doesn't really change non-PAT systems just remove that ifdef as well. Although we could add and use an early_param_off(), these helpers don't use __read_mostly but we want to keep __read_mostly for __pat_enabled as this is a hot path -- upon boot, for instance, a simple guest may see ~4k accesses to pat_enabled(). Since __read_mostly early boot params are not that common we don't add a helper for them just yet. Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Doug Ledford <dledford@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kyle McMartin <kyle@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1430425520-22275-3-git-send-email-mcgrof@do-not-panic.com Link: http://lkml.kernel.org/r/1432628901-18044-13-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-26 08:28:15 +00:00
if (!pat_enabled())
return 0;
x86, pat: separate the pfn attribute tracking for remap_pfn_range and vm_insert_pfn With PAT enabled, vm_insert_pfn() looks up the existing pfn memory attribute and uses it. Expectation is that the driver reserves the memory attributes for the pfn before calling vm_insert_pfn(). remap_pfn_range() (when called for the whole vma) will setup a new attribute (based on the prot argument) for the specified pfn range. This addresses the legacy usage which typically calls remap_pfn_range() with a desired memory attribute. For ranges smaller than the vma size (which is typically not the case), remap_pfn_range() will use the existing memory attribute for the pfn range. Expose two different API's for these different behaviors. track_pfn_insert() for tracking the pfn attribute set by vm_insert_pfn() and track_pfn_remap() for the remap_pfn_range(). This cleanup also prepares the ground for the track/untrack pfn vma routines to take over the ownership of setting PAT specific vm_flag in the 'vma'. [khlebnikov@openvz.org: Clear checks in track_pfn_remap()] [akpm@linux-foundation.org: tweak a few comments] Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Venkatesh Pallipadi <venki@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-08 23:28:29 +00:00
/*
* For anything smaller than the vma size we set prot based on the
* lookup.
*/
pcm = lookup_memtype(paddr);
x86, pat: separate the pfn attribute tracking for remap_pfn_range and vm_insert_pfn With PAT enabled, vm_insert_pfn() looks up the existing pfn memory attribute and uses it. Expectation is that the driver reserves the memory attributes for the pfn before calling vm_insert_pfn(). remap_pfn_range() (when called for the whole vma) will setup a new attribute (based on the prot argument) for the specified pfn range. This addresses the legacy usage which typically calls remap_pfn_range() with a desired memory attribute. For ranges smaller than the vma size (which is typically not the case), remap_pfn_range() will use the existing memory attribute for the pfn range. Expose two different API's for these different behaviors. track_pfn_insert() for tracking the pfn attribute set by vm_insert_pfn() and track_pfn_remap() for the remap_pfn_range(). This cleanup also prepares the ground for the track/untrack pfn vma routines to take over the ownership of setting PAT specific vm_flag in the 'vma'. [khlebnikov@openvz.org: Clear checks in track_pfn_remap()] [akpm@linux-foundation.org: tweak a few comments] Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Venkatesh Pallipadi <venki@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-08 23:28:29 +00:00
/* Check memtype for the remaining pages */
while (size > PAGE_SIZE) {
size -= PAGE_SIZE;
paddr += PAGE_SIZE;
if (pcm != lookup_memtype(paddr))
x86, pat: separate the pfn attribute tracking for remap_pfn_range and vm_insert_pfn With PAT enabled, vm_insert_pfn() looks up the existing pfn memory attribute and uses it. Expectation is that the driver reserves the memory attributes for the pfn before calling vm_insert_pfn(). remap_pfn_range() (when called for the whole vma) will setup a new attribute (based on the prot argument) for the specified pfn range. This addresses the legacy usage which typically calls remap_pfn_range() with a desired memory attribute. For ranges smaller than the vma size (which is typically not the case), remap_pfn_range() will use the existing memory attribute for the pfn range. Expose two different API's for these different behaviors. track_pfn_insert() for tracking the pfn attribute set by vm_insert_pfn() and track_pfn_remap() for the remap_pfn_range(). This cleanup also prepares the ground for the track/untrack pfn vma routines to take over the ownership of setting PAT specific vm_flag in the 'vma'. [khlebnikov@openvz.org: Clear checks in track_pfn_remap()] [akpm@linux-foundation.org: tweak a few comments] Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Venkatesh Pallipadi <venki@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-08 23:28:29 +00:00
return -EINVAL;
}
*prot = __pgprot((pgprot_val(vma->vm_page_prot) & (~_PAGE_CACHE_MASK)) |
cachemode2protval(pcm));
x86, pat: separate the pfn attribute tracking for remap_pfn_range and vm_insert_pfn With PAT enabled, vm_insert_pfn() looks up the existing pfn memory attribute and uses it. Expectation is that the driver reserves the memory attributes for the pfn before calling vm_insert_pfn(). remap_pfn_range() (when called for the whole vma) will setup a new attribute (based on the prot argument) for the specified pfn range. This addresses the legacy usage which typically calls remap_pfn_range() with a desired memory attribute. For ranges smaller than the vma size (which is typically not the case), remap_pfn_range() will use the existing memory attribute for the pfn range. Expose two different API's for these different behaviors. track_pfn_insert() for tracking the pfn attribute set by vm_insert_pfn() and track_pfn_remap() for the remap_pfn_range(). This cleanup also prepares the ground for the track/untrack pfn vma routines to take over the ownership of setting PAT specific vm_flag in the 'vma'. [khlebnikov@openvz.org: Clear checks in track_pfn_remap()] [akpm@linux-foundation.org: tweak a few comments] Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Venkatesh Pallipadi <venki@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-08 23:28:29 +00:00
return 0;
}
int track_pfn_insert(struct vm_area_struct *vma, pgprot_t *prot,
unsigned long pfn)
{
enum page_cache_mode pcm;
x86, pat: separate the pfn attribute tracking for remap_pfn_range and vm_insert_pfn With PAT enabled, vm_insert_pfn() looks up the existing pfn memory attribute and uses it. Expectation is that the driver reserves the memory attributes for the pfn before calling vm_insert_pfn(). remap_pfn_range() (when called for the whole vma) will setup a new attribute (based on the prot argument) for the specified pfn range. This addresses the legacy usage which typically calls remap_pfn_range() with a desired memory attribute. For ranges smaller than the vma size (which is typically not the case), remap_pfn_range() will use the existing memory attribute for the pfn range. Expose two different API's for these different behaviors. track_pfn_insert() for tracking the pfn attribute set by vm_insert_pfn() and track_pfn_remap() for the remap_pfn_range(). This cleanup also prepares the ground for the track/untrack pfn vma routines to take over the ownership of setting PAT specific vm_flag in the 'vma'. [khlebnikov@openvz.org: Clear checks in track_pfn_remap()] [akpm@linux-foundation.org: tweak a few comments] Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Venkatesh Pallipadi <venki@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-08 23:28:29 +00:00
x86/mm/pat: Wrap pat_enabled into a function API We use pat_enabled in x86-specific code to see if PAT is enabled or not but we're granting full access to it even though readers do not need to set it. If, for instance, we granted access to it to modules later they then could override the variable setting... no bueno. This renames pat_enabled to a new static variable __pat_enabled. Folks are redirected to use pat_enabled() now. Code that sets this can only be internal to pat.c. Apart from the early kernel parameter "nopat" to disable PAT, we also have a few cases that disable it later and make use of a helper pat_disable(). It is wrapped under an ifdef but since that code cannot run unless PAT was enabled its not required to wrap it with ifdefs, unwrap that. Likewise, since "nopat" doesn't really change non-PAT systems just remove that ifdef as well. Although we could add and use an early_param_off(), these helpers don't use __read_mostly but we want to keep __read_mostly for __pat_enabled as this is a hot path -- upon boot, for instance, a simple guest may see ~4k accesses to pat_enabled(). Since __read_mostly early boot params are not that common we don't add a helper for them just yet. Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Doug Ledford <dledford@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kyle McMartin <kyle@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1430425520-22275-3-git-send-email-mcgrof@do-not-panic.com Link: http://lkml.kernel.org/r/1432628901-18044-13-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-26 08:28:15 +00:00
if (!pat_enabled())
x86, pat: separate the pfn attribute tracking for remap_pfn_range and vm_insert_pfn With PAT enabled, vm_insert_pfn() looks up the existing pfn memory attribute and uses it. Expectation is that the driver reserves the memory attributes for the pfn before calling vm_insert_pfn(). remap_pfn_range() (when called for the whole vma) will setup a new attribute (based on the prot argument) for the specified pfn range. This addresses the legacy usage which typically calls remap_pfn_range() with a desired memory attribute. For ranges smaller than the vma size (which is typically not the case), remap_pfn_range() will use the existing memory attribute for the pfn range. Expose two different API's for these different behaviors. track_pfn_insert() for tracking the pfn attribute set by vm_insert_pfn() and track_pfn_remap() for the remap_pfn_range(). This cleanup also prepares the ground for the track/untrack pfn vma routines to take over the ownership of setting PAT specific vm_flag in the 'vma'. [khlebnikov@openvz.org: Clear checks in track_pfn_remap()] [akpm@linux-foundation.org: tweak a few comments] Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Venkatesh Pallipadi <venki@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-08 23:28:29 +00:00
return 0;
/* Set prot based on lookup */
pcm = lookup_memtype((resource_size_t)pfn << PAGE_SHIFT);
*prot = __pgprot((pgprot_val(vma->vm_page_prot) & (~_PAGE_CACHE_MASK)) |
cachemode2protval(pcm));
return 0;
}
/*
x86, pat: separate the pfn attribute tracking for remap_pfn_range and vm_insert_pfn With PAT enabled, vm_insert_pfn() looks up the existing pfn memory attribute and uses it. Expectation is that the driver reserves the memory attributes for the pfn before calling vm_insert_pfn(). remap_pfn_range() (when called for the whole vma) will setup a new attribute (based on the prot argument) for the specified pfn range. This addresses the legacy usage which typically calls remap_pfn_range() with a desired memory attribute. For ranges smaller than the vma size (which is typically not the case), remap_pfn_range() will use the existing memory attribute for the pfn range. Expose two different API's for these different behaviors. track_pfn_insert() for tracking the pfn attribute set by vm_insert_pfn() and track_pfn_remap() for the remap_pfn_range(). This cleanup also prepares the ground for the track/untrack pfn vma routines to take over the ownership of setting PAT specific vm_flag in the 'vma'. [khlebnikov@openvz.org: Clear checks in track_pfn_remap()] [akpm@linux-foundation.org: tweak a few comments] Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Venkatesh Pallipadi <venki@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-08 23:28:29 +00:00
* untrack_pfn is called while unmapping a pfnmap for a region.
* untrack can be called for a specific region indicated by pfn and size or
x86, pat: remove the dependency on 'vm_pgoff' in track/untrack pfn vma routines 'pfn' argument for track_pfn_vma_new() can be used for reserving the attribute for the pfn range. No need to depend on 'vm_pgoff' Similarly, untrack_pfn_vma() can depend on the 'pfn' argument if it is non-zero or can use follow_phys() to get the starting value of the pfn range. Also the non zero 'size' argument can be used instead of recomputing it from vma. This cleanup also prepares the ground for the track/untrack pfn vma routines to take over the ownership of setting PAT specific vm_flag in the 'vma'. [khlebnikov@openvz.org: Clear pfn to paddr conversion] Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Venkatesh Pallipadi <venki@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-08 23:28:23 +00:00
* can be for the entire vma (in which case pfn, size are zero).
*/
x86, pat: separate the pfn attribute tracking for remap_pfn_range and vm_insert_pfn With PAT enabled, vm_insert_pfn() looks up the existing pfn memory attribute and uses it. Expectation is that the driver reserves the memory attributes for the pfn before calling vm_insert_pfn(). remap_pfn_range() (when called for the whole vma) will setup a new attribute (based on the prot argument) for the specified pfn range. This addresses the legacy usage which typically calls remap_pfn_range() with a desired memory attribute. For ranges smaller than the vma size (which is typically not the case), remap_pfn_range() will use the existing memory attribute for the pfn range. Expose two different API's for these different behaviors. track_pfn_insert() for tracking the pfn attribute set by vm_insert_pfn() and track_pfn_remap() for the remap_pfn_range(). This cleanup also prepares the ground for the track/untrack pfn vma routines to take over the ownership of setting PAT specific vm_flag in the 'vma'. [khlebnikov@openvz.org: Clear checks in track_pfn_remap()] [akpm@linux-foundation.org: tweak a few comments] Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Venkatesh Pallipadi <venki@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-08 23:28:29 +00:00
void untrack_pfn(struct vm_area_struct *vma, unsigned long pfn,
unsigned long size)
{
resource_size_t paddr;
x86, pat: remove the dependency on 'vm_pgoff' in track/untrack pfn vma routines 'pfn' argument for track_pfn_vma_new() can be used for reserving the attribute for the pfn range. No need to depend on 'vm_pgoff' Similarly, untrack_pfn_vma() can depend on the 'pfn' argument if it is non-zero or can use follow_phys() to get the starting value of the pfn range. Also the non zero 'size' argument can be used instead of recomputing it from vma. This cleanup also prepares the ground for the track/untrack pfn vma routines to take over the ownership of setting PAT specific vm_flag in the 'vma'. [khlebnikov@openvz.org: Clear pfn to paddr conversion] Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Venkatesh Pallipadi <venki@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-08 23:28:23 +00:00
unsigned long prot;
mm, x86, pat: rework linear pfn-mmap tracking Replace the generic vma-flag VM_PFN_AT_MMAP with x86-only VM_PAT. We can toss mapping address from remap_pfn_range() into track_pfn_vma_new(), and collect all PAT-related logic together in arch/x86/. This patch also restores orignal frustration-free is_cow_mapping() check in remap_pfn_range(), as it was before commit v2.6.28-rc8-88-g3c8bb73 ("x86: PAT: store vm_pgoff for all linear_over_vma_region mappings - v3") is_linear_pfn_mapping() checks can be removed from mm/huge_memory.c, because it already handled by VM_PFNMAP in VM_NO_THP bit-mask. [suresh.b.siddha@intel.com: Reset the VM_PAT flag as part of untrack_pfn_vma()] Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Venkatesh Pallipadi <venki@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Venkatesh Pallipadi <venki@google.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-08 23:28:34 +00:00
if (!(vma->vm_flags & VM_PAT))
return;
x86, pat: remove the dependency on 'vm_pgoff' in track/untrack pfn vma routines 'pfn' argument for track_pfn_vma_new() can be used for reserving the attribute for the pfn range. No need to depend on 'vm_pgoff' Similarly, untrack_pfn_vma() can depend on the 'pfn' argument if it is non-zero or can use follow_phys() to get the starting value of the pfn range. Also the non zero 'size' argument can be used instead of recomputing it from vma. This cleanup also prepares the ground for the track/untrack pfn vma routines to take over the ownership of setting PAT specific vm_flag in the 'vma'. [khlebnikov@openvz.org: Clear pfn to paddr conversion] Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Venkatesh Pallipadi <venki@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-08 23:28:23 +00:00
/* free the chunk starting from pfn or the whole chunk */
paddr = (resource_size_t)pfn << PAGE_SHIFT;
if (!paddr && !size) {
if (follow_phys(vma, vma->vm_start, 0, &prot, &paddr)) {
WARN_ON_ONCE(1);
return;
}
size = vma->vm_end - vma->vm_start;
}
x86, pat: remove the dependency on 'vm_pgoff' in track/untrack pfn vma routines 'pfn' argument for track_pfn_vma_new() can be used for reserving the attribute for the pfn range. No need to depend on 'vm_pgoff' Similarly, untrack_pfn_vma() can depend on the 'pfn' argument if it is non-zero or can use follow_phys() to get the starting value of the pfn range. Also the non zero 'size' argument can be used instead of recomputing it from vma. This cleanup also prepares the ground for the track/untrack pfn vma routines to take over the ownership of setting PAT specific vm_flag in the 'vma'. [khlebnikov@openvz.org: Clear pfn to paddr conversion] Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Venkatesh Pallipadi <venki@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-08 23:28:23 +00:00
free_pfn_range(paddr, size);
mm, x86, pat: rework linear pfn-mmap tracking Replace the generic vma-flag VM_PFN_AT_MMAP with x86-only VM_PAT. We can toss mapping address from remap_pfn_range() into track_pfn_vma_new(), and collect all PAT-related logic together in arch/x86/. This patch also restores orignal frustration-free is_cow_mapping() check in remap_pfn_range(), as it was before commit v2.6.28-rc8-88-g3c8bb73 ("x86: PAT: store vm_pgoff for all linear_over_vma_region mappings - v3") is_linear_pfn_mapping() checks can be removed from mm/huge_memory.c, because it already handled by VM_PFNMAP in VM_NO_THP bit-mask. [suresh.b.siddha@intel.com: Reset the VM_PAT flag as part of untrack_pfn_vma()] Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Venkatesh Pallipadi <venki@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Venkatesh Pallipadi <venki@google.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-08 23:28:34 +00:00
vma->vm_flags &= ~VM_PAT;
}
pgprot_t pgprot_writecombine(pgprot_t prot)
{
return __pgprot(pgprot_val(prot) |
cachemode2protval(_PAGE_CACHE_MODE_WC));
}
EXPORT_SYMBOL_GPL(pgprot_writecombine);
#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_X86_PAT)
static struct memtype *memtype_get_idx(loff_t pos)
{
struct memtype *print_entry;
int ret;
print_entry = kzalloc(sizeof(struct memtype), GFP_KERNEL);
if (!print_entry)
return NULL;
spin_lock(&memtype_lock);
ret = rbt_memtype_copy_nth_element(print_entry, pos);
spin_unlock(&memtype_lock);
if (!ret) {
return print_entry;
} else {
kfree(print_entry);
return NULL;
}
}
static void *memtype_seq_start(struct seq_file *seq, loff_t *pos)
{
if (*pos == 0) {
++*pos;
seq_puts(seq, "PAT memtype list:\n");
}
return memtype_get_idx(*pos);
}
static void *memtype_seq_next(struct seq_file *seq, void *v, loff_t *pos)
{
++*pos;
return memtype_get_idx(*pos);
}
static void memtype_seq_stop(struct seq_file *seq, void *v)
{
}
static int memtype_seq_show(struct seq_file *seq, void *v)
{
struct memtype *print_entry = (struct memtype *)v;
seq_printf(seq, "%s @ 0x%Lx-0x%Lx\n", cattr_name(print_entry->type),
print_entry->start, print_entry->end);
kfree(print_entry);
return 0;
}
static const struct seq_operations memtype_seq_ops = {
.start = memtype_seq_start,
.next = memtype_seq_next,
.stop = memtype_seq_stop,
.show = memtype_seq_show,
};
static int memtype_seq_open(struct inode *inode, struct file *file)
{
return seq_open(file, &memtype_seq_ops);
}
static const struct file_operations memtype_fops = {
.open = memtype_seq_open,
.read = seq_read,
.llseek = seq_lseek,
.release = seq_release,
};
static int __init pat_memtype_list_init(void)
{
x86/mm/pat: Wrap pat_enabled into a function API We use pat_enabled in x86-specific code to see if PAT is enabled or not but we're granting full access to it even though readers do not need to set it. If, for instance, we granted access to it to modules later they then could override the variable setting... no bueno. This renames pat_enabled to a new static variable __pat_enabled. Folks are redirected to use pat_enabled() now. Code that sets this can only be internal to pat.c. Apart from the early kernel parameter "nopat" to disable PAT, we also have a few cases that disable it later and make use of a helper pat_disable(). It is wrapped under an ifdef but since that code cannot run unless PAT was enabled its not required to wrap it with ifdefs, unwrap that. Likewise, since "nopat" doesn't really change non-PAT systems just remove that ifdef as well. Although we could add and use an early_param_off(), these helpers don't use __read_mostly but we want to keep __read_mostly for __pat_enabled as this is a hot path -- upon boot, for instance, a simple guest may see ~4k accesses to pat_enabled(). Since __read_mostly early boot params are not that common we don't add a helper for them just yet. Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Doug Ledford <dledford@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kyle McMartin <kyle@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1430425520-22275-3-git-send-email-mcgrof@do-not-panic.com Link: http://lkml.kernel.org/r/1432628901-18044-13-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-26 08:28:15 +00:00
if (pat_enabled()) {
debugfs_create_file("pat_memtype_list", S_IRUSR,
arch_debugfs_dir, NULL, &memtype_fops);
}
return 0;
}
late_initcall(pat_memtype_list_init);
#endif /* CONFIG_DEBUG_FS && CONFIG_X86_PAT */