pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
#!/usr/bin/env python3
|
2019-05-29 14:18:02 +00:00
|
|
|
# SPDX-License-Identifier: GPL-2.0-only
|
2014-01-17 00:18:22 +00:00
|
|
|
#
|
|
|
|
# Tool for analyzing suspend/resume timing
|
|
|
|
# Copyright (c) 2013, Intel Corporation.
|
|
|
|
#
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
# This program is free software; you can redistribute it and/or modify it
|
|
|
|
# under the terms and conditions of the GNU General Public License,
|
|
|
|
# version 2, as published by the Free Software Foundation.
|
|
|
|
#
|
|
|
|
# This program is distributed in the hope it will be useful, but WITHOUT
|
|
|
|
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
|
|
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
|
|
# more details.
|
|
|
|
#
|
2014-01-17 00:18:22 +00:00
|
|
|
# Authors:
|
|
|
|
# Todd Brandt <todd.e.brandt@linux.intel.com>
|
|
|
|
#
|
2016-07-15 21:34:14 +00:00
|
|
|
# Links:
|
|
|
|
# Home Page
|
2019-05-14 17:53:58 +00:00
|
|
|
# https://01.org/pm-graph
|
2016-07-15 21:34:14 +00:00
|
|
|
# Source repo
|
2019-05-14 17:53:58 +00:00
|
|
|
# git@github.com:intel/pm-graph
|
2016-07-15 21:34:14 +00:00
|
|
|
#
|
2014-01-17 00:18:22 +00:00
|
|
|
# Description:
|
|
|
|
# This tool is designed to assist kernel and OS developers in optimizing
|
|
|
|
# their linux stack's suspend/resume time. Using a kernel image built
|
|
|
|
# with a few extra options enabled, the tool will execute a suspend and
|
|
|
|
# will capture dmesg and ftrace data until resume is complete. This data
|
|
|
|
# is transformed into a device timeline and a callgraph to give a quick
|
|
|
|
# and detailed view of which devices and callbacks are taking the most
|
|
|
|
# time in suspend/resume. The output is a single html file which can be
|
|
|
|
# viewed in firefox or chrome.
|
|
|
|
#
|
|
|
|
# The following kernel build options are required:
|
2019-05-14 17:53:58 +00:00
|
|
|
# CONFIG_DEVMEM=y
|
2014-01-17 00:18:22 +00:00
|
|
|
# CONFIG_PM_DEBUG=y
|
|
|
|
# CONFIG_PM_SLEEP_DEBUG=y
|
|
|
|
# CONFIG_FTRACE=y
|
|
|
|
# CONFIG_FUNCTION_TRACER=y
|
|
|
|
# CONFIG_FUNCTION_GRAPH_TRACER=y
|
2016-07-15 21:34:14 +00:00
|
|
|
# CONFIG_KPROBES=y
|
|
|
|
# CONFIG_KPROBES_ON_FTRACE=y
|
2014-01-17 00:18:22 +00:00
|
|
|
#
|
2014-08-08 16:11:59 +00:00
|
|
|
# For kernel versions older than 3.15:
|
2014-01-17 00:18:22 +00:00
|
|
|
# The following additional kernel parameters are required:
|
|
|
|
# (e.g. in file /etc/default/grub)
|
|
|
|
# GRUB_CMDLINE_LINUX_DEFAULT="... initcall_debug log_buf_len=16M ..."
|
|
|
|
#
|
|
|
|
|
2014-08-08 16:11:59 +00:00
|
|
|
# ----------------- LIBRARIES --------------------
|
|
|
|
|
2014-01-17 00:18:22 +00:00
|
|
|
import sys
|
|
|
|
import time
|
|
|
|
import os
|
|
|
|
import string
|
|
|
|
import re
|
|
|
|
import platform
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
import signal
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
import codecs
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
from datetime import datetime, timedelta
|
2014-01-17 00:18:22 +00:00
|
|
|
import struct
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
import configparser
|
2018-01-30 08:17:20 +00:00
|
|
|
import gzip
|
2016-12-14 18:37:05 +00:00
|
|
|
from threading import Thread
|
2016-12-14 18:37:06 +00:00
|
|
|
from subprocess import call, Popen, PIPE
|
2019-05-14 17:53:57 +00:00
|
|
|
import base64
|
2014-01-17 00:18:22 +00:00
|
|
|
|
2018-10-08 22:56:32 +00:00
|
|
|
def pprint(msg):
|
|
|
|
print(msg)
|
|
|
|
sys.stdout.flush()
|
|
|
|
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
def ascii(text):
|
|
|
|
return text.decode('ascii', 'ignore')
|
|
|
|
|
2014-08-08 16:11:59 +00:00
|
|
|
# ----------------- CLASSES --------------------
|
2014-01-17 00:18:22 +00:00
|
|
|
|
2014-08-08 16:11:59 +00:00
|
|
|
# Class: SystemValues
|
|
|
|
# Description:
|
|
|
|
# A global, single-instance container used to
|
|
|
|
# store system values and test parameters
|
2014-01-17 00:18:22 +00:00
|
|
|
class SystemValues:
|
2017-04-07 18:05:35 +00:00
|
|
|
title = 'SleepGraph'
|
2020-11-11 02:36:17 +00:00
|
|
|
version = '5.8'
|
2016-07-15 21:34:14 +00:00
|
|
|
ansi = False
|
2018-01-30 08:17:20 +00:00
|
|
|
rs = 0
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
display = ''
|
2018-01-30 08:17:20 +00:00
|
|
|
gzip = False
|
|
|
|
sync = False
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
wifi = False
|
2014-08-08 16:11:59 +00:00
|
|
|
verbose = False
|
2017-07-05 21:42:55 +00:00
|
|
|
testlog = True
|
2019-05-14 17:53:58 +00:00
|
|
|
dmesglog = True
|
2017-07-05 21:42:55 +00:00
|
|
|
ftracelog = False
|
2020-11-11 02:36:17 +00:00
|
|
|
acpidebug = True
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
tstat = True
|
2020-11-11 02:36:17 +00:00
|
|
|
mindevlen = 0.0001
|
2016-12-14 18:37:07 +00:00
|
|
|
mincglen = 0.0
|
|
|
|
cgphase = ''
|
|
|
|
cgtest = -1
|
2018-01-30 08:17:20 +00:00
|
|
|
cgskip = ''
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
maxfail = 0
|
|
|
|
multitest = {'run': False, 'count': 1000000, 'delay': 0}
|
2017-04-07 18:05:35 +00:00
|
|
|
max_graph_depth = 0
|
2016-12-14 18:37:06 +00:00
|
|
|
callloopmaxgap = 0.0001
|
|
|
|
callloopmaxlen = 0.005
|
2018-01-30 08:17:20 +00:00
|
|
|
bufsize = 0
|
2017-07-05 21:42:55 +00:00
|
|
|
cpucount = 0
|
|
|
|
memtotal = 204800
|
2018-01-30 08:17:20 +00:00
|
|
|
memfree = 204800
|
2016-07-15 21:34:14 +00:00
|
|
|
srgap = 0
|
|
|
|
cgexp = False
|
2017-07-05 21:42:55 +00:00
|
|
|
testdir = ''
|
2018-01-30 08:17:20 +00:00
|
|
|
outdir = ''
|
2014-08-08 16:11:59 +00:00
|
|
|
tpath = '/sys/kernel/debug/tracing/'
|
|
|
|
fpdtpath = '/sys/firmware/acpi/tables/FPDT'
|
|
|
|
epath = '/sys/kernel/debug/tracing/events/power/'
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
pmdpath = '/sys/power/pm_debug_messages'
|
2020-11-11 02:36:17 +00:00
|
|
|
acpipath='/sys/module/acpi/parameters/debug_level'
|
2014-08-08 16:11:59 +00:00
|
|
|
traceevents = [
|
|
|
|
'suspend_resume',
|
2019-05-14 17:53:58 +00:00
|
|
|
'wakeup_source_activate',
|
|
|
|
'wakeup_source_deactivate',
|
2014-08-08 16:11:59 +00:00
|
|
|
'device_pm_callback_end',
|
|
|
|
'device_pm_callback_start'
|
|
|
|
]
|
2016-12-14 18:37:07 +00:00
|
|
|
logmsg = ''
|
2016-07-15 21:34:14 +00:00
|
|
|
testcommand = ''
|
2014-08-08 16:11:59 +00:00
|
|
|
mempath = '/dev/mem'
|
|
|
|
powerfile = '/sys/power/state'
|
2017-07-05 21:42:55 +00:00
|
|
|
mempowerfile = '/sys/power/mem_sleep'
|
2018-10-08 22:56:32 +00:00
|
|
|
diskpowerfile = '/sys/power/disk'
|
2014-08-08 16:11:59 +00:00
|
|
|
suspendmode = 'mem'
|
2017-07-05 21:42:55 +00:00
|
|
|
memmode = ''
|
2018-10-08 22:56:32 +00:00
|
|
|
diskmode = ''
|
2014-08-08 16:11:59 +00:00
|
|
|
hostname = 'localhost'
|
|
|
|
prefix = 'test'
|
|
|
|
teststamp = ''
|
2017-07-05 21:42:55 +00:00
|
|
|
sysstamp = ''
|
2016-07-15 21:34:14 +00:00
|
|
|
dmesgstart = 0.0
|
2014-08-08 16:11:59 +00:00
|
|
|
dmesgfile = ''
|
|
|
|
ftracefile = ''
|
2017-07-05 21:42:55 +00:00
|
|
|
htmlfile = 'output.html'
|
2018-01-30 08:17:20 +00:00
|
|
|
result = ''
|
2017-04-07 18:05:35 +00:00
|
|
|
rtcwake = True
|
|
|
|
rtcwaketime = 15
|
2014-08-08 16:11:59 +00:00
|
|
|
rtcpath = ''
|
|
|
|
devicefilter = []
|
2018-01-30 08:17:20 +00:00
|
|
|
cgfilter = []
|
2014-08-08 16:11:59 +00:00
|
|
|
stamp = 0
|
|
|
|
execcount = 1
|
|
|
|
x2delay = 0
|
2018-01-30 08:17:20 +00:00
|
|
|
skiphtml = False
|
2014-08-08 16:11:59 +00:00
|
|
|
usecallgraph = False
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
ftopfunc = 'pm_suspend'
|
2019-05-14 17:53:58 +00:00
|
|
|
ftop = False
|
2014-08-08 16:11:59 +00:00
|
|
|
usetraceevents = False
|
2016-07-15 21:34:14 +00:00
|
|
|
usetracemarkers = True
|
|
|
|
usekprobes = True
|
|
|
|
usedevsrc = False
|
2016-12-14 18:37:05 +00:00
|
|
|
useprocmon = False
|
2014-08-08 16:11:59 +00:00
|
|
|
notestrun = False
|
2018-01-30 08:17:20 +00:00
|
|
|
cgdump = False
|
2018-10-08 22:56:32 +00:00
|
|
|
devdump = False
|
2016-12-14 18:37:05 +00:00
|
|
|
mixedphaseheight = True
|
2016-07-15 21:34:14 +00:00
|
|
|
devprops = dict()
|
2020-11-11 02:36:17 +00:00
|
|
|
cfgdef = dict()
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
platinfo = []
|
2016-12-14 18:37:05 +00:00
|
|
|
predelay = 0
|
|
|
|
postdelay = 0
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
tmstart = 'SUSPEND START %Y%m%d-%H:%M:%S.%f'
|
|
|
|
tmend = 'RESUME COMPLETE %Y%m%d-%H:%M:%S.%f'
|
2016-07-15 21:34:14 +00:00
|
|
|
tracefuncs = {
|
2018-01-30 08:17:20 +00:00
|
|
|
'sys_sync': {},
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
'ksys_sync': {},
|
2020-11-11 02:36:17 +00:00
|
|
|
'__pm_notifier_call_chain': {},
|
2018-01-30 08:17:20 +00:00
|
|
|
'pm_prepare_console': {},
|
|
|
|
'pm_notifier_call_chain': {},
|
|
|
|
'freeze_processes': {},
|
|
|
|
'freeze_kernel_threads': {},
|
|
|
|
'pm_restrict_gfp_mask': {},
|
|
|
|
'acpi_suspend_begin': {},
|
|
|
|
'acpi_hibernation_begin': {},
|
|
|
|
'acpi_hibernation_enter': {},
|
|
|
|
'acpi_hibernation_leave': {},
|
|
|
|
'acpi_pm_freeze': {},
|
|
|
|
'acpi_pm_thaw': {},
|
2019-05-14 17:53:58 +00:00
|
|
|
'acpi_s2idle_end': {},
|
|
|
|
'acpi_s2idle_sync': {},
|
|
|
|
'acpi_s2idle_begin': {},
|
|
|
|
'acpi_s2idle_prepare': {},
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
'acpi_s2idle_prepare_late': {},
|
2019-05-14 17:53:58 +00:00
|
|
|
'acpi_s2idle_wake': {},
|
|
|
|
'acpi_s2idle_wakeup': {},
|
|
|
|
'acpi_s2idle_restore': {},
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
'acpi_s2idle_restore_early': {},
|
2018-01-30 08:17:20 +00:00
|
|
|
'hibernate_preallocate_memory': {},
|
|
|
|
'create_basic_memory_bitmaps': {},
|
|
|
|
'swsusp_write': {},
|
|
|
|
'suspend_console': {},
|
|
|
|
'acpi_pm_prepare': {},
|
|
|
|
'syscore_suspend': {},
|
2020-07-21 01:02:49 +00:00
|
|
|
'arch_enable_nonboot_cpus_end': {},
|
2018-01-30 08:17:20 +00:00
|
|
|
'syscore_resume': {},
|
|
|
|
'acpi_pm_finish': {},
|
|
|
|
'resume_console': {},
|
|
|
|
'acpi_pm_end': {},
|
|
|
|
'pm_restore_gfp_mask': {},
|
|
|
|
'thaw_processes': {},
|
|
|
|
'pm_restore_console': {},
|
2016-07-15 21:34:14 +00:00
|
|
|
'CPU_OFF': {
|
|
|
|
'func':'_cpu_down',
|
|
|
|
'args_x86_64': {'cpu':'%di:s32'},
|
2016-12-14 18:37:05 +00:00
|
|
|
'format': 'CPU_OFF[{cpu}]'
|
2016-07-15 21:34:14 +00:00
|
|
|
},
|
|
|
|
'CPU_ON': {
|
|
|
|
'func':'_cpu_up',
|
|
|
|
'args_x86_64': {'cpu':'%di:s32'},
|
2016-12-14 18:37:05 +00:00
|
|
|
'format': 'CPU_ON[{cpu}]'
|
2016-07-15 21:34:14 +00:00
|
|
|
},
|
|
|
|
}
|
|
|
|
dev_tracefuncs = {
|
|
|
|
# general wait/delay/sleep
|
2016-12-14 18:37:07 +00:00
|
|
|
'msleep': { 'args_x86_64': {'time':'%di:s32'}, 'ub': 1 },
|
|
|
|
'schedule_timeout': { 'args_x86_64': {'timeout':'%di:s32'}, 'ub': 1 },
|
|
|
|
'udelay': { 'func':'__const_udelay', 'args_x86_64': {'loops':'%di:s32'}, 'ub': 1 },
|
|
|
|
'usleep_range': { 'args_x86_64': {'min':'%di:s32', 'max':'%si:s32'}, 'ub': 1 },
|
|
|
|
'mutex_lock_slowpath': { 'func':'__mutex_lock_slowpath', 'ub': 1 },
|
|
|
|
'acpi_os_stall': {'ub': 1},
|
2019-05-14 17:53:57 +00:00
|
|
|
'rt_mutex_slowlock': {'ub': 1},
|
2016-07-15 21:34:14 +00:00
|
|
|
# ACPI
|
2018-01-30 08:17:20 +00:00
|
|
|
'acpi_resume_power_resources': {},
|
2019-05-14 17:53:58 +00:00
|
|
|
'acpi_ps_execute_method': { 'args_x86_64': {
|
|
|
|
'fullpath':'+0(+40(%di)):string',
|
|
|
|
}},
|
|
|
|
# mei_me
|
|
|
|
'mei_reset': {},
|
2016-07-15 21:34:14 +00:00
|
|
|
# filesystem
|
2018-01-30 08:17:20 +00:00
|
|
|
'ext4_sync_fs': {},
|
2016-12-14 18:37:07 +00:00
|
|
|
# 80211
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
'ath10k_bmi_read_memory': { 'args_x86_64': {'length':'%cx:s32'} },
|
|
|
|
'ath10k_bmi_write_memory': { 'args_x86_64': {'length':'%cx:s32'} },
|
|
|
|
'ath10k_bmi_fast_download': { 'args_x86_64': {'length':'%cx:s32'} },
|
2018-01-30 08:17:20 +00:00
|
|
|
'iwlagn_mac_start': {},
|
|
|
|
'iwlagn_alloc_bcast_station': {},
|
|
|
|
'iwl_trans_pcie_start_hw': {},
|
|
|
|
'iwl_trans_pcie_start_fw': {},
|
|
|
|
'iwl_run_init_ucode': {},
|
|
|
|
'iwl_load_ucode_wait_alive': {},
|
|
|
|
'iwl_alive_start': {},
|
|
|
|
'iwlagn_mac_stop': {},
|
|
|
|
'iwlagn_mac_suspend': {},
|
|
|
|
'iwlagn_mac_resume': {},
|
|
|
|
'iwlagn_mac_add_interface': {},
|
|
|
|
'iwlagn_mac_remove_interface': {},
|
|
|
|
'iwlagn_mac_change_interface': {},
|
|
|
|
'iwlagn_mac_config': {},
|
|
|
|
'iwlagn_configure_filter': {},
|
|
|
|
'iwlagn_mac_hw_scan': {},
|
|
|
|
'iwlagn_bss_info_changed': {},
|
|
|
|
'iwlagn_mac_channel_switch': {},
|
|
|
|
'iwlagn_mac_flush': {},
|
2016-07-15 21:34:14 +00:00
|
|
|
# ATA
|
|
|
|
'ata_eh_recover': { 'args_x86_64': {'port':'+36(%di):s32'} },
|
|
|
|
# i915
|
2018-01-30 08:17:20 +00:00
|
|
|
'i915_gem_resume': {},
|
|
|
|
'i915_restore_state': {},
|
|
|
|
'intel_opregion_setup': {},
|
|
|
|
'g4x_pre_enable_dp': {},
|
|
|
|
'vlv_pre_enable_dp': {},
|
|
|
|
'chv_pre_enable_dp': {},
|
|
|
|
'g4x_enable_dp': {},
|
|
|
|
'vlv_enable_dp': {},
|
|
|
|
'intel_hpd_init': {},
|
|
|
|
'intel_opregion_register': {},
|
|
|
|
'intel_dp_detect': {},
|
|
|
|
'intel_hdmi_detect': {},
|
|
|
|
'intel_opregion_init': {},
|
|
|
|
'intel_fbdev_set_suspend': {},
|
2016-07-15 21:34:14 +00:00
|
|
|
}
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
infocmds = [
|
|
|
|
[0, 'kparams', 'cat', '/proc/cmdline'],
|
|
|
|
[0, 'mcelog', 'mcelog'],
|
|
|
|
[0, 'pcidevices', 'lspci', '-tv'],
|
|
|
|
[0, 'usbdevices', 'lsusb', '-t'],
|
|
|
|
[1, 'interrupts', 'cat', '/proc/interrupts'],
|
|
|
|
[1, 'wakeups', 'cat', '/sys/kernel/debug/wakeup_sources'],
|
|
|
|
[2, 'gpecounts', 'sh', '-c', 'grep -v invalid /sys/firmware/acpi/interrupts/*'],
|
|
|
|
[2, 'suspendstats', 'sh', '-c', 'grep -v invalid /sys/power/suspend_stats/*'],
|
|
|
|
[2, 'cpuidle', 'sh', '-c', 'grep -v invalid /sys/devices/system/cpu/cpu*/cpuidle/state*/s2idle/*'],
|
|
|
|
[2, 'battery', 'sh', '-c', 'grep -v invalid /sys/class/power_supply/*/*'],
|
|
|
|
]
|
2018-01-30 08:17:20 +00:00
|
|
|
cgblacklist = []
|
2016-07-15 21:34:14 +00:00
|
|
|
kprobes = dict()
|
|
|
|
timeformat = '%.3f'
|
2018-01-30 08:17:20 +00:00
|
|
|
cmdline = '%s %s' % \
|
2018-05-24 16:36:28 +00:00
|
|
|
(os.path.basename(sys.argv[0]), ' '.join(sys.argv[1:]))
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
sudouser = ''
|
2014-08-08 16:11:59 +00:00
|
|
|
def __init__(self):
|
2016-12-14 18:37:06 +00:00
|
|
|
self.archargs = 'args_'+platform.machine()
|
2014-08-08 16:11:59 +00:00
|
|
|
self.hostname = platform.node()
|
|
|
|
if(self.hostname == ''):
|
|
|
|
self.hostname = 'localhost'
|
|
|
|
rtc = "rtc0"
|
|
|
|
if os.path.exists('/dev/rtc'):
|
|
|
|
rtc = os.readlink('/dev/rtc')
|
|
|
|
rtc = '/sys/class/rtc/'+rtc
|
|
|
|
if os.path.exists(rtc) and os.path.exists(rtc+'/date') and \
|
|
|
|
os.path.exists(rtc+'/time') and os.path.exists(rtc+'/wakealarm'):
|
|
|
|
self.rtcpath = rtc
|
2016-07-15 21:34:14 +00:00
|
|
|
if (hasattr(sys.stdout, 'isatty') and sys.stdout.isatty()):
|
|
|
|
self.ansi = True
|
2017-07-05 21:42:55 +00:00
|
|
|
self.testdir = datetime.now().strftime('suspend-%y%m%d-%H%M%S')
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
if os.getuid() == 0 and 'SUDO_USER' in os.environ and \
|
|
|
|
os.environ['SUDO_USER']:
|
|
|
|
self.sudouser = os.environ['SUDO_USER']
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
def resetlog(self):
|
|
|
|
self.logmsg = ''
|
|
|
|
self.platinfo = []
|
2018-01-30 08:17:20 +00:00
|
|
|
def vprint(self, msg):
|
|
|
|
self.logmsg += msg+'\n'
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
if self.verbose or msg.startswith('WARNING:'):
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint(msg)
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
def signalHandler(self, signum, frame):
|
|
|
|
if not self.result:
|
|
|
|
return
|
|
|
|
signame = self.signames[signum] if signum in self.signames else 'UNKNOWN'
|
|
|
|
msg = 'Signal %s caused a tool exit, line %d' % (signame, frame.f_lineno)
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
self.outputResult({'error':msg})
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
sys.exit(3)
|
|
|
|
def signalHandlerInit(self):
|
|
|
|
capture = ['BUS', 'SYS', 'XCPU', 'XFSZ', 'PWR', 'HUP', 'INT', 'QUIT',
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
'ILL', 'ABRT', 'FPE', 'SEGV', 'TERM']
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
self.signames = dict()
|
|
|
|
for i in capture:
|
|
|
|
s = 'SIG'+i
|
|
|
|
try:
|
|
|
|
signum = getattr(signal, s)
|
|
|
|
signal.signal(signum, self.signalHandler)
|
|
|
|
except:
|
|
|
|
continue
|
|
|
|
self.signames[signum] = s
|
2017-07-05 21:42:55 +00:00
|
|
|
def rootCheck(self, fatal=True):
|
|
|
|
if(os.access(self.powerfile, os.W_OK)):
|
|
|
|
return True
|
|
|
|
if fatal:
|
2018-01-30 08:17:20 +00:00
|
|
|
msg = 'This command requires sysfs mount and root access'
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint('ERROR: %s\n' % msg)
|
2018-01-30 08:17:20 +00:00
|
|
|
self.outputResult({'error':msg})
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
sys.exit(1)
|
2017-07-05 21:42:55 +00:00
|
|
|
return False
|
2017-04-07 18:05:35 +00:00
|
|
|
def rootUser(self, fatal=False):
|
|
|
|
if 'USER' in os.environ and os.environ['USER'] == 'root':
|
|
|
|
return True
|
|
|
|
if fatal:
|
2018-01-30 08:17:20 +00:00
|
|
|
msg = 'This command must be run as root'
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint('ERROR: %s\n' % msg)
|
2018-01-30 08:17:20 +00:00
|
|
|
self.outputResult({'error':msg})
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
sys.exit(1)
|
2017-04-07 18:05:35 +00:00
|
|
|
return False
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
def usable(self, file):
|
|
|
|
return (os.path.exists(file) and os.path.getsize(file) > 0)
|
2018-01-30 08:17:20 +00:00
|
|
|
def getExec(self, cmd):
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
try:
|
|
|
|
fp = Popen(['which', cmd], stdout=PIPE, stderr=PIPE).stdout
|
|
|
|
out = ascii(fp.read()).strip()
|
|
|
|
fp.close()
|
|
|
|
except:
|
|
|
|
out = ''
|
|
|
|
if out:
|
|
|
|
return out
|
|
|
|
for path in ['/sbin', '/bin', '/usr/sbin', '/usr/bin',
|
|
|
|
'/usr/local/sbin', '/usr/local/bin']:
|
2018-01-30 08:17:20 +00:00
|
|
|
cmdfull = os.path.join(path, cmd)
|
|
|
|
if os.path.exists(cmdfull):
|
|
|
|
return cmdfull
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
return out
|
2016-07-15 21:34:14 +00:00
|
|
|
def setPrecision(self, num):
|
|
|
|
if num < 0 or num > 6:
|
|
|
|
return
|
|
|
|
self.timeformat = '%.{0}f'.format(num)
|
2016-12-14 18:37:05 +00:00
|
|
|
def setOutputFolder(self, value):
|
|
|
|
args = dict()
|
|
|
|
n = datetime.now()
|
|
|
|
args['date'] = n.strftime('%y%m%d')
|
|
|
|
args['time'] = n.strftime('%H%M%S')
|
2018-01-30 08:17:20 +00:00
|
|
|
args['hostname'] = args['host'] = self.hostname
|
2019-05-14 17:53:58 +00:00
|
|
|
args['mode'] = self.suspendmode
|
2017-07-05 21:42:55 +00:00
|
|
|
return value.format(**args)
|
2014-01-17 00:18:22 +00:00
|
|
|
def setOutputFile(self):
|
2017-07-05 21:42:55 +00:00
|
|
|
if self.dmesgfile != '':
|
2018-01-30 08:17:20 +00:00
|
|
|
m = re.match('(?P<name>.*)_dmesg\.txt.*', self.dmesgfile)
|
2014-01-17 00:18:22 +00:00
|
|
|
if(m):
|
2014-08-08 16:11:59 +00:00
|
|
|
self.htmlfile = m.group('name')+'.html'
|
2017-07-05 21:42:55 +00:00
|
|
|
if self.ftracefile != '':
|
2018-01-30 08:17:20 +00:00
|
|
|
m = re.match('(?P<name>.*)_ftrace\.txt.*', self.ftracefile)
|
2014-01-17 00:18:22 +00:00
|
|
|
if(m):
|
2014-08-08 16:11:59 +00:00
|
|
|
self.htmlfile = m.group('name')+'.html'
|
2017-07-05 21:42:55 +00:00
|
|
|
def systemInfo(self, info):
|
2019-05-14 17:53:58 +00:00
|
|
|
p = m = ''
|
2017-07-05 21:42:55 +00:00
|
|
|
if 'baseboard-manufacturer' in info:
|
|
|
|
m = info['baseboard-manufacturer']
|
|
|
|
elif 'system-manufacturer' in info:
|
|
|
|
m = info['system-manufacturer']
|
2019-05-14 17:53:57 +00:00
|
|
|
if 'system-product-name' in info:
|
2017-07-05 21:42:55 +00:00
|
|
|
p = info['system-product-name']
|
2019-05-14 17:53:57 +00:00
|
|
|
elif 'baseboard-product-name' in info:
|
|
|
|
p = info['baseboard-product-name']
|
|
|
|
if m[:5].lower() == 'intel' and 'baseboard-product-name' in info:
|
|
|
|
p = info['baseboard-product-name']
|
2019-05-14 17:53:58 +00:00
|
|
|
c = info['processor-version'] if 'processor-version' in info else ''
|
|
|
|
b = info['bios-version'] if 'bios-version' in info else ''
|
|
|
|
r = info['bios-release-date'] if 'bios-release-date' in info else ''
|
|
|
|
self.sysstamp = '# sysinfo | man:%s | plat:%s | cpu:%s | bios:%s | biosdate:%s | numcpu:%d | memsz:%d | memfr:%d' % \
|
|
|
|
(m, p, c, b, r, self.cpucount, self.memtotal, self.memfree)
|
2018-01-30 08:17:20 +00:00
|
|
|
def printSystemInfo(self, fatal=False):
|
2017-07-05 21:42:55 +00:00
|
|
|
self.rootCheck(True)
|
2018-01-30 08:17:20 +00:00
|
|
|
out = dmidecode(self.mempath, fatal)
|
|
|
|
if len(out) < 1:
|
|
|
|
return
|
2017-07-05 21:42:55 +00:00
|
|
|
fmt = '%-24s: %s'
|
|
|
|
for name in sorted(out):
|
2019-05-14 17:53:58 +00:00
|
|
|
print(fmt % (name, out[name]))
|
|
|
|
print(fmt % ('cpucount', ('%d' % self.cpucount)))
|
|
|
|
print(fmt % ('memtotal', ('%d kB' % self.memtotal)))
|
|
|
|
print(fmt % ('memfree', ('%d kB' % self.memfree)))
|
2017-07-05 21:42:55 +00:00
|
|
|
def cpuInfo(self):
|
|
|
|
self.cpucount = 0
|
|
|
|
fp = open('/proc/cpuinfo', 'r')
|
|
|
|
for line in fp:
|
|
|
|
if re.match('^processor[ \t]*:[ \t]*[0-9]*', line):
|
|
|
|
self.cpucount += 1
|
|
|
|
fp.close()
|
|
|
|
fp = open('/proc/meminfo', 'r')
|
|
|
|
for line in fp:
|
|
|
|
m = re.match('^MemTotal:[ \t]*(?P<sz>[0-9]*) *kB', line)
|
|
|
|
if m:
|
|
|
|
self.memtotal = int(m.group('sz'))
|
2018-01-30 08:17:20 +00:00
|
|
|
m = re.match('^MemFree:[ \t]*(?P<sz>[0-9]*) *kB', line)
|
|
|
|
if m:
|
|
|
|
self.memfree = int(m.group('sz'))
|
2017-07-05 21:42:55 +00:00
|
|
|
fp.close()
|
|
|
|
def initTestOutput(self, name):
|
2016-07-15 21:34:14 +00:00
|
|
|
self.prefix = self.hostname
|
|
|
|
v = open('/proc/version', 'r').read().strip()
|
2019-05-14 17:53:58 +00:00
|
|
|
kver = v.split()[2]
|
2017-07-05 21:42:55 +00:00
|
|
|
fmt = name+'-%m%d%y-%H%M%S'
|
|
|
|
testtime = datetime.now().strftime(fmt)
|
2014-08-08 16:11:59 +00:00
|
|
|
self.teststamp = \
|
|
|
|
'# '+testtime+' '+self.prefix+' '+self.suspendmode+' '+kver
|
2018-01-30 08:17:20 +00:00
|
|
|
ext = ''
|
|
|
|
if self.gzip:
|
|
|
|
ext = '.gz'
|
2014-08-08 16:11:59 +00:00
|
|
|
self.dmesgfile = \
|
2018-01-30 08:17:20 +00:00
|
|
|
self.testdir+'/'+self.prefix+'_'+self.suspendmode+'_dmesg.txt'+ext
|
2014-08-08 16:11:59 +00:00
|
|
|
self.ftracefile = \
|
2018-01-30 08:17:20 +00:00
|
|
|
self.testdir+'/'+self.prefix+'_'+self.suspendmode+'_ftrace.txt'+ext
|
2014-08-08 16:11:59 +00:00
|
|
|
self.htmlfile = \
|
|
|
|
self.testdir+'/'+self.prefix+'_'+self.suspendmode+'.html'
|
2016-07-15 21:34:14 +00:00
|
|
|
if not os.path.isdir(self.testdir):
|
2019-05-14 17:53:58 +00:00
|
|
|
os.makedirs(self.testdir)
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
self.sudoUserchown(self.testdir)
|
2018-01-30 08:17:20 +00:00
|
|
|
def getValueList(self, value):
|
|
|
|
out = []
|
|
|
|
for i in value.split(','):
|
|
|
|
if i.strip():
|
|
|
|
out.append(i.strip())
|
|
|
|
return out
|
2016-12-14 18:37:05 +00:00
|
|
|
def setDeviceFilter(self, value):
|
2018-01-30 08:17:20 +00:00
|
|
|
self.devicefilter = self.getValueList(value)
|
|
|
|
def setCallgraphFilter(self, value):
|
|
|
|
self.cgfilter = self.getValueList(value)
|
2019-05-14 17:53:58 +00:00
|
|
|
def skipKprobes(self, value):
|
|
|
|
for k in self.getValueList(value):
|
|
|
|
if k in self.tracefuncs:
|
|
|
|
del self.tracefuncs[k]
|
|
|
|
if k in self.dev_tracefuncs:
|
|
|
|
del self.dev_tracefuncs[k]
|
2018-01-30 08:17:20 +00:00
|
|
|
def setCallgraphBlacklist(self, file):
|
|
|
|
self.cgblacklist = self.listFromFile(file)
|
2016-07-15 21:34:14 +00:00
|
|
|
def rtcWakeAlarmOn(self):
|
2016-12-14 18:37:06 +00:00
|
|
|
call('echo 0 > '+self.rtcpath+'/wakealarm', shell=True)
|
2018-01-30 08:17:20 +00:00
|
|
|
nowtime = open(self.rtcpath+'/since_epoch', 'r').read().strip()
|
|
|
|
if nowtime:
|
|
|
|
nowtime = int(nowtime)
|
2014-08-08 16:11:59 +00:00
|
|
|
else:
|
|
|
|
# if hardware time fails, use the software time
|
|
|
|
nowtime = int(datetime.now().strftime('%s'))
|
|
|
|
alarm = nowtime + self.rtcwaketime
|
2016-12-14 18:37:06 +00:00
|
|
|
call('echo %d > %s/wakealarm' % (alarm, self.rtcpath), shell=True)
|
2016-07-15 21:34:14 +00:00
|
|
|
def rtcWakeAlarmOff(self):
|
2016-12-14 18:37:06 +00:00
|
|
|
call('echo 0 > %s/wakealarm' % self.rtcpath, shell=True)
|
2016-07-15 21:34:14 +00:00
|
|
|
def initdmesg(self):
|
|
|
|
# get the latest time stamp from the dmesg log
|
2020-11-11 02:36:17 +00:00
|
|
|
lines = Popen('dmesg', stdout=PIPE).stdout.readlines()
|
2016-07-15 21:34:14 +00:00
|
|
|
ktime = '0'
|
2020-11-11 02:36:17 +00:00
|
|
|
for line in reversed(lines):
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
line = ascii(line).replace('\r\n', '')
|
2016-07-15 21:34:14 +00:00
|
|
|
idx = line.find('[')
|
|
|
|
if idx > 1:
|
|
|
|
line = line[idx:]
|
|
|
|
m = re.match('[ \t]*(\[ *)(?P<ktime>[0-9\.]*)(\]) (?P<msg>.*)', line)
|
|
|
|
if(m):
|
|
|
|
ktime = m.group('ktime')
|
2020-11-11 02:36:17 +00:00
|
|
|
break
|
2016-07-15 21:34:14 +00:00
|
|
|
self.dmesgstart = float(ktime)
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
def getdmesg(self, testdata):
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
op = self.writeDatafileHeader(self.dmesgfile, testdata)
|
2016-07-15 21:34:14 +00:00
|
|
|
# store all new dmesg lines since initdmesg was called
|
2016-12-14 18:37:06 +00:00
|
|
|
fp = Popen('dmesg', stdout=PIPE).stdout
|
2016-07-15 21:34:14 +00:00
|
|
|
for line in fp:
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
line = ascii(line).replace('\r\n', '')
|
2016-07-15 21:34:14 +00:00
|
|
|
idx = line.find('[')
|
|
|
|
if idx > 1:
|
|
|
|
line = line[idx:]
|
|
|
|
m = re.match('[ \t]*(\[ *)(?P<ktime>[0-9\.]*)(\]) (?P<msg>.*)', line)
|
|
|
|
if(not m):
|
|
|
|
continue
|
|
|
|
ktime = float(m.group('ktime'))
|
|
|
|
if ktime > self.dmesgstart:
|
|
|
|
op.write(line)
|
|
|
|
fp.close()
|
|
|
|
op.close()
|
2018-01-30 08:17:20 +00:00
|
|
|
def listFromFile(self, file):
|
|
|
|
list = []
|
2016-07-15 21:34:14 +00:00
|
|
|
fp = open(file)
|
2018-01-30 08:17:20 +00:00
|
|
|
for i in fp.read().split('\n'):
|
|
|
|
i = i.strip()
|
|
|
|
if i and i[0] != '#':
|
|
|
|
list.append(i)
|
2016-07-15 21:34:14 +00:00
|
|
|
fp.close()
|
2018-01-30 08:17:20 +00:00
|
|
|
return list
|
|
|
|
def addFtraceFilterFunctions(self, file):
|
|
|
|
for i in self.listFromFile(file):
|
2016-07-15 21:34:14 +00:00
|
|
|
if len(i) < 2:
|
|
|
|
continue
|
|
|
|
self.tracefuncs[i] = dict()
|
|
|
|
def getFtraceFilterFunctions(self, current):
|
2017-07-05 21:42:55 +00:00
|
|
|
self.rootCheck(True)
|
2016-07-15 21:34:14 +00:00
|
|
|
if not current:
|
2016-12-14 18:37:06 +00:00
|
|
|
call('cat '+self.tpath+'available_filter_functions', shell=True)
|
2016-07-15 21:34:14 +00:00
|
|
|
return
|
2018-01-30 08:17:20 +00:00
|
|
|
master = self.listFromFile(self.tpath+'available_filter_functions')
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
for i in sorted(self.tracefuncs):
|
2016-12-14 18:37:06 +00:00
|
|
|
if 'func' in self.tracefuncs[i]:
|
|
|
|
i = self.tracefuncs[i]['func']
|
|
|
|
if i in master:
|
2019-05-14 17:53:58 +00:00
|
|
|
print(i)
|
2016-12-14 18:37:06 +00:00
|
|
|
else:
|
2019-05-14 17:53:58 +00:00
|
|
|
print(self.colorText(i))
|
2016-07-15 21:34:14 +00:00
|
|
|
def setFtraceFilterFunctions(self, list):
|
2018-01-30 08:17:20 +00:00
|
|
|
master = self.listFromFile(self.tpath+'available_filter_functions')
|
2016-07-15 21:34:14 +00:00
|
|
|
flist = ''
|
|
|
|
for i in list:
|
|
|
|
if i not in master:
|
|
|
|
continue
|
|
|
|
if ' [' in i:
|
|
|
|
flist += i.split(' ')[0]+'\n'
|
|
|
|
else:
|
|
|
|
flist += i+'\n'
|
|
|
|
fp = open(self.tpath+'set_graph_function', 'w')
|
|
|
|
fp.write(flist)
|
|
|
|
fp.close()
|
|
|
|
def basicKprobe(self, name):
|
2016-12-14 18:37:05 +00:00
|
|
|
self.kprobes[name] = {'name': name,'func': name,'args': dict(),'format': name}
|
2016-07-15 21:34:14 +00:00
|
|
|
def defaultKprobe(self, name, kdata):
|
|
|
|
k = kdata
|
2016-12-14 18:37:05 +00:00
|
|
|
for field in ['name', 'format', 'func']:
|
2016-07-15 21:34:14 +00:00
|
|
|
if field not in k:
|
|
|
|
k[field] = name
|
2016-12-14 18:37:06 +00:00
|
|
|
if self.archargs in k:
|
|
|
|
k['args'] = k[self.archargs]
|
2016-07-15 21:34:14 +00:00
|
|
|
else:
|
|
|
|
k['args'] = dict()
|
|
|
|
k['format'] = name
|
|
|
|
self.kprobes[name] = k
|
|
|
|
def kprobeColor(self, name):
|
|
|
|
if name not in self.kprobes or 'color' not in self.kprobes[name]:
|
|
|
|
return ''
|
|
|
|
return self.kprobes[name]['color']
|
|
|
|
def kprobeDisplayName(self, name, dataraw):
|
|
|
|
if name not in self.kprobes:
|
|
|
|
self.basicKprobe(name)
|
|
|
|
data = ''
|
|
|
|
quote=0
|
|
|
|
# first remvoe any spaces inside quotes, and the quotes
|
|
|
|
for c in dataraw:
|
|
|
|
if c == '"':
|
|
|
|
quote = (quote + 1) % 2
|
|
|
|
if quote and c == ' ':
|
|
|
|
data += '_'
|
|
|
|
elif c != '"':
|
|
|
|
data += c
|
|
|
|
fmt, args = self.kprobes[name]['format'], self.kprobes[name]['args']
|
|
|
|
arglist = dict()
|
|
|
|
# now process the args
|
|
|
|
for arg in sorted(args):
|
|
|
|
arglist[arg] = ''
|
|
|
|
m = re.match('.* '+arg+'=(?P<arg>.*) ', data);
|
|
|
|
if m:
|
|
|
|
arglist[arg] = m.group('arg')
|
|
|
|
else:
|
|
|
|
m = re.match('.* '+arg+'=(?P<arg>.*)', data);
|
|
|
|
if m:
|
|
|
|
arglist[arg] = m.group('arg')
|
|
|
|
out = fmt.format(**arglist)
|
|
|
|
out = out.replace(' ', '_').replace('"', '')
|
|
|
|
return out
|
2016-12-14 18:37:06 +00:00
|
|
|
def kprobeText(self, kname, kprobe):
|
|
|
|
name = fmt = func = kname
|
|
|
|
args = dict()
|
|
|
|
if 'name' in kprobe:
|
|
|
|
name = kprobe['name']
|
|
|
|
if 'format' in kprobe:
|
|
|
|
fmt = kprobe['format']
|
|
|
|
if 'func' in kprobe:
|
|
|
|
func = kprobe['func']
|
|
|
|
if self.archargs in kprobe:
|
|
|
|
args = kprobe[self.archargs]
|
|
|
|
if 'args' in kprobe:
|
|
|
|
args = kprobe['args']
|
2016-07-15 21:34:14 +00:00
|
|
|
if re.findall('{(?P<n>[a-z,A-Z,0-9]*)}', func):
|
2016-12-14 18:37:07 +00:00
|
|
|
doError('Kprobe "%s" has format info in the function name "%s"' % (name, func))
|
2016-07-15 21:34:14 +00:00
|
|
|
for arg in re.findall('{(?P<n>[a-z,A-Z,0-9]*)}', fmt):
|
|
|
|
if arg not in args:
|
2016-12-14 18:37:07 +00:00
|
|
|
doError('Kprobe "%s" is missing argument "%s"' % (name, arg))
|
2016-07-15 21:34:14 +00:00
|
|
|
val = 'p:%s_cal %s' % (name, func)
|
|
|
|
for i in sorted(args):
|
|
|
|
val += ' %s=%s' % (i, args[i])
|
|
|
|
val += '\nr:%s_ret %s $retval\n' % (name, func)
|
|
|
|
return val
|
2016-12-14 18:37:07 +00:00
|
|
|
def addKprobes(self, output=False):
|
2017-07-05 21:42:55 +00:00
|
|
|
if len(self.kprobes) < 1:
|
2016-12-14 18:37:07 +00:00
|
|
|
return
|
|
|
|
if output:
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint(' kprobe functions in this kernel:')
|
2016-07-15 21:34:14 +00:00
|
|
|
# first test each kprobe
|
|
|
|
rejects = []
|
2016-12-14 18:37:07 +00:00
|
|
|
# sort kprobes: trace, ub-dev, custom, dev
|
|
|
|
kpl = [[], [], [], []]
|
2018-01-30 08:17:20 +00:00
|
|
|
linesout = len(self.kprobes)
|
2016-07-15 21:34:14 +00:00
|
|
|
for name in sorted(self.kprobes):
|
2016-12-14 18:37:07 +00:00
|
|
|
res = self.colorText('YES', 32)
|
2016-12-14 18:37:06 +00:00
|
|
|
if not self.testKprobe(name, self.kprobes[name]):
|
2016-12-14 18:37:07 +00:00
|
|
|
res = self.colorText('NO')
|
2016-07-15 21:34:14 +00:00
|
|
|
rejects.append(name)
|
2016-12-14 18:37:07 +00:00
|
|
|
else:
|
|
|
|
if name in self.tracefuncs:
|
|
|
|
kpl[0].append(name)
|
|
|
|
elif name in self.dev_tracefuncs:
|
|
|
|
if 'ub' in self.dev_tracefuncs[name]:
|
|
|
|
kpl[1].append(name)
|
|
|
|
else:
|
|
|
|
kpl[3].append(name)
|
|
|
|
else:
|
|
|
|
kpl[2].append(name)
|
|
|
|
if output:
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint(' %s: %s' % (name, res))
|
2016-12-14 18:37:07 +00:00
|
|
|
kplist = kpl[0] + kpl[1] + kpl[2] + kpl[3]
|
2016-07-15 21:34:14 +00:00
|
|
|
# remove all failed ones from the list
|
|
|
|
for name in rejects:
|
|
|
|
self.kprobes.pop(name)
|
2016-12-14 18:37:07 +00:00
|
|
|
# set the kprobes all at once
|
2016-07-15 21:34:14 +00:00
|
|
|
self.fsetVal('', 'kprobe_events')
|
|
|
|
kprobeevents = ''
|
2016-12-14 18:37:07 +00:00
|
|
|
for kp in kplist:
|
2016-12-14 18:37:06 +00:00
|
|
|
kprobeevents += self.kprobeText(kp, self.kprobes[kp])
|
2016-07-15 21:34:14 +00:00
|
|
|
self.fsetVal(kprobeevents, 'kprobe_events')
|
2016-12-14 18:37:07 +00:00
|
|
|
if output:
|
2018-01-30 08:17:20 +00:00
|
|
|
check = self.fgetVal('kprobe_events')
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
linesack = (len(check.split('\n')) - 1) // 2
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint(' kprobe functions enabled: %d/%d' % (linesack, linesout))
|
2016-07-15 21:34:14 +00:00
|
|
|
self.fsetVal('1', 'events/kprobes/enable')
|
2016-12-14 18:37:06 +00:00
|
|
|
def testKprobe(self, kname, kprobe):
|
2016-12-14 18:37:07 +00:00
|
|
|
self.fsetVal('0', 'events/kprobes/enable')
|
2016-12-14 18:37:06 +00:00
|
|
|
kprobeevents = self.kprobeText(kname, kprobe)
|
2016-07-15 21:34:14 +00:00
|
|
|
if not kprobeevents:
|
|
|
|
return False
|
|
|
|
try:
|
|
|
|
self.fsetVal(kprobeevents, 'kprobe_events')
|
|
|
|
check = self.fgetVal('kprobe_events')
|
|
|
|
except:
|
|
|
|
return False
|
|
|
|
linesout = len(kprobeevents.split('\n'))
|
|
|
|
linesack = len(check.split('\n'))
|
|
|
|
if linesack < linesout:
|
|
|
|
return False
|
|
|
|
return True
|
2019-09-04 21:04:52 +00:00
|
|
|
def setVal(self, val, file):
|
2016-07-15 21:34:14 +00:00
|
|
|
if not os.path.exists(file):
|
|
|
|
return False
|
|
|
|
try:
|
2019-09-04 21:04:52 +00:00
|
|
|
fp = open(file, 'wb', 0)
|
|
|
|
fp.write(val.encode())
|
2016-12-14 18:37:07 +00:00
|
|
|
fp.flush()
|
2016-07-15 21:34:14 +00:00
|
|
|
fp.close()
|
|
|
|
except:
|
2017-07-05 21:42:55 +00:00
|
|
|
return False
|
2016-07-15 21:34:14 +00:00
|
|
|
return True
|
2019-09-04 21:04:52 +00:00
|
|
|
def fsetVal(self, val, path):
|
|
|
|
return self.setVal(val, self.tpath+path)
|
2018-01-30 08:17:20 +00:00
|
|
|
def getVal(self, file):
|
2016-07-15 21:34:14 +00:00
|
|
|
res = ''
|
|
|
|
if not os.path.exists(file):
|
|
|
|
return res
|
|
|
|
try:
|
|
|
|
fp = open(file, 'r')
|
|
|
|
res = fp.read()
|
|
|
|
fp.close()
|
|
|
|
except:
|
|
|
|
pass
|
|
|
|
return res
|
2018-01-30 08:17:20 +00:00
|
|
|
def fgetVal(self, path):
|
|
|
|
return self.getVal(self.tpath+path)
|
2016-07-15 21:34:14 +00:00
|
|
|
def cleanupFtrace(self):
|
2018-01-30 08:17:20 +00:00
|
|
|
if(self.usecallgraph or self.usetraceevents or self.usedevsrc):
|
2016-07-15 21:34:14 +00:00
|
|
|
self.fsetVal('0', 'events/kprobes/enable')
|
|
|
|
self.fsetVal('', 'kprobe_events')
|
2018-01-30 08:17:20 +00:00
|
|
|
self.fsetVal('1024', 'buffer_size_kb')
|
2016-07-15 21:34:14 +00:00
|
|
|
def setupAllKprobes(self):
|
|
|
|
for name in self.tracefuncs:
|
|
|
|
self.defaultKprobe(name, self.tracefuncs[name])
|
|
|
|
for name in self.dev_tracefuncs:
|
|
|
|
self.defaultKprobe(name, self.dev_tracefuncs[name])
|
|
|
|
def isCallgraphFunc(self, name):
|
2016-12-14 18:37:06 +00:00
|
|
|
if len(self.tracefuncs) < 1 and self.suspendmode == 'command':
|
2016-07-15 21:34:14 +00:00
|
|
|
return True
|
|
|
|
for i in self.tracefuncs:
|
|
|
|
if 'func' in self.tracefuncs[i]:
|
2016-12-14 18:37:06 +00:00
|
|
|
f = self.tracefuncs[i]['func']
|
2016-07-15 21:34:14 +00:00
|
|
|
else:
|
2016-12-14 18:37:06 +00:00
|
|
|
f = i
|
|
|
|
if name == f:
|
|
|
|
return True
|
2016-07-15 21:34:14 +00:00
|
|
|
return False
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
def initFtrace(self, quiet=False):
|
|
|
|
if not quiet:
|
|
|
|
sysvals.printSystemInfo(False)
|
|
|
|
pprint('INITIALIZING FTRACE...')
|
2016-07-15 21:34:14 +00:00
|
|
|
# turn trace off
|
|
|
|
self.fsetVal('0', 'tracing_on')
|
|
|
|
self.cleanupFtrace()
|
2020-11-11 02:36:17 +00:00
|
|
|
self.testVal(self.pmdpath, 'basic', '1')
|
2016-07-15 21:34:14 +00:00
|
|
|
# set the trace clock to global
|
|
|
|
self.fsetVal('global', 'trace_clock')
|
|
|
|
self.fsetVal('nop', 'current_tracer')
|
2018-01-30 08:17:20 +00:00
|
|
|
# set trace buffer to an appropriate value
|
|
|
|
cpus = max(1, self.cpucount)
|
|
|
|
if self.bufsize > 0:
|
|
|
|
tgtsize = self.bufsize
|
|
|
|
elif self.usecallgraph or self.usedevsrc:
|
2019-05-14 17:53:57 +00:00
|
|
|
bmax = (1*1024*1024) if self.suspendmode in ['disk', 'command'] \
|
|
|
|
else (3*1024*1024)
|
2018-10-08 22:56:32 +00:00
|
|
|
tgtsize = min(self.memfree, bmax)
|
2017-07-05 21:42:55 +00:00
|
|
|
else:
|
2018-01-30 08:17:20 +00:00
|
|
|
tgtsize = 65536
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
while not self.fsetVal('%d' % (tgtsize // cpus), 'buffer_size_kb'):
|
2018-01-30 08:17:20 +00:00
|
|
|
# if the size failed to set, lower it and keep trying
|
|
|
|
tgtsize -= 65536
|
|
|
|
if tgtsize < 65536:
|
|
|
|
tgtsize = int(self.fgetVal('buffer_size_kb')) * cpus
|
|
|
|
break
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
self.vprint('Setting trace buffers to %d kB (%d kB per cpu)' % (tgtsize, tgtsize/cpus))
|
2016-12-14 18:37:06 +00:00
|
|
|
# initialize the callgraph trace
|
2016-07-15 21:34:14 +00:00
|
|
|
if(self.usecallgraph):
|
|
|
|
# set trace type
|
|
|
|
self.fsetVal('function_graph', 'current_tracer')
|
|
|
|
self.fsetVal('', 'set_ftrace_filter')
|
|
|
|
# set trace format options
|
|
|
|
self.fsetVal('print-parent', 'trace_options')
|
|
|
|
self.fsetVal('funcgraph-abstime', 'trace_options')
|
|
|
|
self.fsetVal('funcgraph-cpu', 'trace_options')
|
|
|
|
self.fsetVal('funcgraph-duration', 'trace_options')
|
|
|
|
self.fsetVal('funcgraph-proc', 'trace_options')
|
|
|
|
self.fsetVal('funcgraph-tail', 'trace_options')
|
|
|
|
self.fsetVal('nofuncgraph-overhead', 'trace_options')
|
|
|
|
self.fsetVal('context-info', 'trace_options')
|
|
|
|
self.fsetVal('graph-time', 'trace_options')
|
2017-04-07 18:05:35 +00:00
|
|
|
self.fsetVal('%d' % self.max_graph_depth, 'max_graph_depth')
|
2016-12-14 18:37:06 +00:00
|
|
|
cf = ['dpm_run_callback']
|
2018-01-30 08:17:20 +00:00
|
|
|
if(self.usetraceevents):
|
2016-12-14 18:37:06 +00:00
|
|
|
cf += ['dpm_prepare', 'dpm_complete']
|
|
|
|
for fn in self.tracefuncs:
|
|
|
|
if 'func' in self.tracefuncs[fn]:
|
|
|
|
cf.append(self.tracefuncs[fn]['func'])
|
|
|
|
else:
|
|
|
|
cf.append(fn)
|
2019-05-14 17:53:58 +00:00
|
|
|
if self.ftop:
|
|
|
|
self.setFtraceFilterFunctions([self.ftopfunc])
|
|
|
|
else:
|
|
|
|
self.setFtraceFilterFunctions(cf)
|
2016-12-14 18:37:06 +00:00
|
|
|
# initialize the kprobe trace
|
|
|
|
elif self.usekprobes:
|
|
|
|
for name in self.tracefuncs:
|
|
|
|
self.defaultKprobe(name, self.tracefuncs[name])
|
|
|
|
if self.usedevsrc:
|
|
|
|
for name in self.dev_tracefuncs:
|
|
|
|
self.defaultKprobe(name, self.dev_tracefuncs[name])
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
if not quiet:
|
|
|
|
pprint('INITIALIZING KPROBES...')
|
2016-12-14 18:37:07 +00:00
|
|
|
self.addKprobes(self.verbose)
|
2016-07-15 21:34:14 +00:00
|
|
|
if(self.usetraceevents):
|
|
|
|
# turn trace events on
|
|
|
|
events = iter(self.traceevents)
|
|
|
|
for e in events:
|
|
|
|
self.fsetVal('1', 'events/power/'+e+'/enable')
|
|
|
|
# clear the trace buffer
|
|
|
|
self.fsetVal('', 'trace')
|
|
|
|
def verifyFtrace(self):
|
|
|
|
# files needed for any trace data
|
|
|
|
files = ['buffer_size_kb', 'current_tracer', 'trace', 'trace_clock',
|
|
|
|
'trace_marker', 'trace_options', 'tracing_on']
|
|
|
|
# files needed for callgraph trace data
|
|
|
|
tp = self.tpath
|
|
|
|
if(self.usecallgraph):
|
|
|
|
files += [
|
|
|
|
'available_filter_functions',
|
|
|
|
'set_ftrace_filter',
|
|
|
|
'set_graph_function'
|
|
|
|
]
|
|
|
|
for f in files:
|
|
|
|
if(os.path.exists(tp+f) == False):
|
|
|
|
return False
|
|
|
|
return True
|
|
|
|
def verifyKprobes(self):
|
|
|
|
# files needed for kprobes to work
|
|
|
|
files = ['kprobe_events', 'events']
|
|
|
|
tp = self.tpath
|
|
|
|
for f in files:
|
|
|
|
if(os.path.exists(tp+f) == False):
|
|
|
|
return False
|
|
|
|
return True
|
2016-12-14 18:37:07 +00:00
|
|
|
def colorText(self, str, color=31):
|
2016-07-15 21:34:14 +00:00
|
|
|
if not self.ansi:
|
|
|
|
return str
|
2016-12-14 18:37:07 +00:00
|
|
|
return '\x1B[%d;40m%s\x1B[m' % (color, str)
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
def writeDatafileHeader(self, filename, testdata):
|
2018-01-30 08:17:20 +00:00
|
|
|
fp = self.openlog(filename, 'w')
|
|
|
|
fp.write('%s\n%s\n# command | %s\n' % (self.teststamp, self.sysstamp, self.cmdline))
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
for test in testdata:
|
|
|
|
if 'fw' in test:
|
|
|
|
fw = test['fw']
|
2017-07-05 21:42:55 +00:00
|
|
|
if(fw):
|
|
|
|
fp.write('# fwsuspend %u fwresume %u\n' % (fw[0], fw[1]))
|
2019-05-14 17:53:57 +00:00
|
|
|
if 'turbo' in test:
|
|
|
|
fp.write('# turbostat %s\n' % test['turbo'])
|
2019-05-14 17:53:58 +00:00
|
|
|
if 'wifi' in test:
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
fp.write('# wifi %s\n' % test['wifi'])
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
if test['error'] or len(testdata) > 1:
|
|
|
|
fp.write('# enter_sleep_error %s\n' % test['error'])
|
2018-01-30 08:17:20 +00:00
|
|
|
return fp
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
def sudoUserchown(self, dir):
|
|
|
|
if os.path.exists(dir) and self.sudouser:
|
2018-01-30 08:17:20 +00:00
|
|
|
cmd = 'chown -R {0}:{0} {1} > /dev/null 2>&1'
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
call(cmd.format(self.sudouser, dir), shell=True)
|
2018-01-30 08:17:20 +00:00
|
|
|
def outputResult(self, testdata, num=0):
|
|
|
|
if not self.result:
|
|
|
|
return
|
|
|
|
n = ''
|
|
|
|
if num > 0:
|
|
|
|
n = '%d' % num
|
|
|
|
fp = open(self.result, 'a')
|
|
|
|
if 'error' in testdata:
|
|
|
|
fp.write('result%s: fail\n' % n)
|
|
|
|
fp.write('error%s: %s\n' % (n, testdata['error']))
|
|
|
|
else:
|
|
|
|
fp.write('result%s: pass\n' % n)
|
|
|
|
for v in ['suspend', 'resume', 'boot', 'lastinit']:
|
|
|
|
if v in testdata:
|
|
|
|
fp.write('%s%s: %.3f\n' % (v, n, testdata[v]))
|
|
|
|
for v in ['fwsuspend', 'fwresume']:
|
|
|
|
if v in testdata:
|
|
|
|
fp.write('%s%s: %.3f\n' % (v, n, testdata[v] / 1000000.0))
|
|
|
|
if 'bugurl' in testdata:
|
|
|
|
fp.write('url%s: %s\n' % (n, testdata['bugurl']))
|
2017-07-05 21:42:55 +00:00
|
|
|
fp.close()
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
self.sudoUserchown(self.result)
|
2018-01-30 08:17:20 +00:00
|
|
|
def configFile(self, file):
|
|
|
|
dir = os.path.dirname(os.path.realpath(__file__))
|
|
|
|
if os.path.exists(file):
|
|
|
|
return file
|
|
|
|
elif os.path.exists(dir+'/'+file):
|
|
|
|
return dir+'/'+file
|
|
|
|
elif os.path.exists(dir+'/config/'+file):
|
|
|
|
return dir+'/config/'+file
|
|
|
|
return ''
|
|
|
|
def openlog(self, filename, mode):
|
|
|
|
isgz = self.gzip
|
|
|
|
if mode == 'r':
|
|
|
|
try:
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
with gzip.open(filename, mode+'t') as fp:
|
2018-01-30 08:17:20 +00:00
|
|
|
test = fp.read(64)
|
|
|
|
isgz = True
|
|
|
|
except:
|
|
|
|
isgz = False
|
|
|
|
if isgz:
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
return gzip.open(filename, mode+'t')
|
2018-01-30 08:17:20 +00:00
|
|
|
return open(filename, mode)
|
2020-11-11 02:36:17 +00:00
|
|
|
def putlog(self, filename, text):
|
|
|
|
with self.openlog(filename, 'a') as fp:
|
|
|
|
fp.write(text)
|
|
|
|
fp.close()
|
|
|
|
def dlog(self, text):
|
|
|
|
self.putlog(self.dmesgfile, '# %s\n' % text)
|
|
|
|
def flog(self, text):
|
|
|
|
self.putlog(self.ftracefile, text)
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
def b64unzip(self, data):
|
|
|
|
try:
|
|
|
|
out = codecs.decode(base64.b64decode(data), 'zlib').decode()
|
|
|
|
except:
|
|
|
|
out = data
|
|
|
|
return out
|
|
|
|
def b64zip(self, data):
|
|
|
|
out = base64.b64encode(codecs.encode(data.encode(), 'zlib')).decode()
|
|
|
|
return out
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
def platforminfo(self, cmdafter):
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
# add platform info on to a completed ftrace file
|
|
|
|
if not os.path.exists(self.ftracefile):
|
|
|
|
return False
|
|
|
|
footer = '#\n'
|
|
|
|
|
|
|
|
# add test command string line if need be
|
|
|
|
if self.suspendmode == 'command' and self.testcommand:
|
|
|
|
footer += '# platform-testcmd: %s\n' % (self.testcommand)
|
|
|
|
|
|
|
|
# get a list of target devices from the ftrace file
|
|
|
|
props = dict()
|
|
|
|
tp = TestProps()
|
|
|
|
tf = self.openlog(self.ftracefile, 'r')
|
|
|
|
for line in tf:
|
2020-07-21 01:02:49 +00:00
|
|
|
if tp.stampInfo(line, self):
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
continue
|
|
|
|
# parse only valid lines, if this is not one move on
|
|
|
|
m = re.match(tp.ftrace_line_fmt, line)
|
|
|
|
if(not m or 'device_pm_callback_start' not in line):
|
|
|
|
continue
|
|
|
|
m = re.match('.*: (?P<drv>.*) (?P<d>.*), parent: *(?P<p>.*), .*', m.group('msg'));
|
|
|
|
if(not m):
|
|
|
|
continue
|
|
|
|
dev = m.group('d')
|
|
|
|
if dev not in props:
|
|
|
|
props[dev] = DevProps()
|
|
|
|
tf.close()
|
|
|
|
|
|
|
|
# now get the syspath for each target device
|
|
|
|
for dirname, dirnames, filenames in os.walk('/sys/devices'):
|
|
|
|
if(re.match('.*/power', dirname) and 'async' in filenames):
|
|
|
|
dev = dirname.split('/')[-2]
|
|
|
|
if dev in props and (not props[dev].syspath or len(dirname) < len(props[dev].syspath)):
|
|
|
|
props[dev].syspath = dirname[:-6]
|
|
|
|
|
|
|
|
# now fill in the properties for our target devices
|
|
|
|
for dev in sorted(props):
|
|
|
|
dirname = props[dev].syspath
|
|
|
|
if not dirname or not os.path.exists(dirname):
|
|
|
|
continue
|
|
|
|
with open(dirname+'/power/async') as fp:
|
|
|
|
text = fp.read()
|
|
|
|
props[dev].isasync = False
|
|
|
|
if 'enabled' in text:
|
|
|
|
props[dev].isasync = True
|
|
|
|
fields = os.listdir(dirname)
|
|
|
|
if 'product' in fields:
|
|
|
|
with open(dirname+'/product', 'rb') as fp:
|
|
|
|
props[dev].altname = ascii(fp.read())
|
|
|
|
elif 'name' in fields:
|
|
|
|
with open(dirname+'/name', 'rb') as fp:
|
|
|
|
props[dev].altname = ascii(fp.read())
|
|
|
|
elif 'model' in fields:
|
|
|
|
with open(dirname+'/model', 'rb') as fp:
|
|
|
|
props[dev].altname = ascii(fp.read())
|
|
|
|
elif 'description' in fields:
|
|
|
|
with open(dirname+'/description', 'rb') as fp:
|
|
|
|
props[dev].altname = ascii(fp.read())
|
|
|
|
elif 'id' in fields:
|
|
|
|
with open(dirname+'/id', 'rb') as fp:
|
|
|
|
props[dev].altname = ascii(fp.read())
|
|
|
|
elif 'idVendor' in fields and 'idProduct' in fields:
|
|
|
|
idv, idp = '', ''
|
|
|
|
with open(dirname+'/idVendor', 'rb') as fp:
|
|
|
|
idv = ascii(fp.read()).strip()
|
|
|
|
with open(dirname+'/idProduct', 'rb') as fp:
|
|
|
|
idp = ascii(fp.read()).strip()
|
|
|
|
props[dev].altname = '%s:%s' % (idv, idp)
|
|
|
|
if props[dev].altname:
|
|
|
|
out = props[dev].altname.strip().replace('\n', ' ')\
|
|
|
|
.replace(',', ' ').replace(';', ' ')
|
|
|
|
props[dev].altname = out
|
|
|
|
|
|
|
|
# add a devinfo line to the bottom of ftrace
|
|
|
|
out = ''
|
|
|
|
for dev in sorted(props):
|
|
|
|
out += props[dev].out(dev)
|
|
|
|
footer += '# platform-devinfo: %s\n' % self.b64zip(out)
|
|
|
|
|
|
|
|
# add a line for each of these commands with their outputs
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
for name, cmdline, info in cmdafter:
|
|
|
|
footer += '# platform-%s: %s | %s\n' % (name, cmdline, self.b64zip(info))
|
2020-11-11 02:36:17 +00:00
|
|
|
self.flog(footer)
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
return True
|
|
|
|
def commonPrefix(self, list):
|
|
|
|
if len(list) < 2:
|
|
|
|
return ''
|
|
|
|
prefix = list[0]
|
|
|
|
for s in list[1:]:
|
|
|
|
while s[:len(prefix)] != prefix and prefix:
|
|
|
|
prefix = prefix[:len(prefix)-1]
|
|
|
|
if not prefix:
|
|
|
|
break
|
|
|
|
if '/' in prefix and prefix[-1] != '/':
|
|
|
|
prefix = prefix[0:prefix.rfind('/')+1]
|
|
|
|
return prefix
|
|
|
|
def dictify(self, text, format):
|
|
|
|
out = dict()
|
|
|
|
header = True if format == 1 else False
|
|
|
|
delim = ' ' if format == 1 else ':'
|
|
|
|
for line in text.split('\n'):
|
|
|
|
if header:
|
|
|
|
header, out['@'] = False, line
|
|
|
|
continue
|
|
|
|
line = line.strip()
|
|
|
|
if delim in line:
|
|
|
|
data = line.split(delim, 1)
|
|
|
|
num = re.search(r'[\d]+', data[1])
|
|
|
|
if format == 2 and num:
|
|
|
|
out[data[0].strip()] = num.group()
|
|
|
|
else:
|
|
|
|
out[data[0].strip()] = data[1]
|
|
|
|
return out
|
|
|
|
def cmdinfo(self, begin, debug=False):
|
|
|
|
out = []
|
|
|
|
if begin:
|
|
|
|
self.cmd1 = dict()
|
|
|
|
for cargs in self.infocmds:
|
|
|
|
delta, name = cargs[0], cargs[1]
|
|
|
|
cmdline, cmdpath = ' '.join(cargs[2:]), self.getExec(cargs[2])
|
|
|
|
if not cmdpath or (begin and not delta):
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
continue
|
2020-11-11 02:36:17 +00:00
|
|
|
self.dlog('[%s]' % cmdline)
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
try:
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
fp = Popen([cmdpath]+cargs[3:], stdout=PIPE, stderr=PIPE).stdout
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
info = ascii(fp.read()).strip()
|
|
|
|
fp.close()
|
|
|
|
except:
|
|
|
|
continue
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
if not debug and begin:
|
|
|
|
self.cmd1[name] = self.dictify(info, delta)
|
|
|
|
elif not debug and delta and name in self.cmd1:
|
|
|
|
before, after = self.cmd1[name], self.dictify(info, delta)
|
|
|
|
dinfo = ('\t%s\n' % before['@']) if '@' in before else ''
|
|
|
|
prefix = self.commonPrefix(list(before.keys()))
|
|
|
|
for key in sorted(before):
|
|
|
|
if key in after and before[key] != after[key]:
|
|
|
|
title = key.replace(prefix, '')
|
|
|
|
if delta == 2:
|
|
|
|
dinfo += '\t%s : %s -> %s\n' % \
|
|
|
|
(title, before[key].strip(), after[key].strip())
|
|
|
|
else:
|
|
|
|
dinfo += '%10s (start) : %s\n%10s (after) : %s\n' % \
|
|
|
|
(title, before[key], title, after[key])
|
|
|
|
dinfo = '\tnothing changed' if not dinfo else dinfo.rstrip()
|
|
|
|
out.append((name, cmdline, dinfo))
|
|
|
|
else:
|
|
|
|
out.append((name, cmdline, '\tnothing' if not info else info))
|
|
|
|
return out
|
2020-11-11 02:36:17 +00:00
|
|
|
def testVal(self, file, fmt='basic', value=''):
|
|
|
|
if file == 'restoreall':
|
|
|
|
for f in self.cfgdef:
|
|
|
|
if os.path.exists(f):
|
|
|
|
fp = open(f, 'w')
|
|
|
|
fp.write(self.cfgdef[f])
|
|
|
|
fp.close()
|
|
|
|
self.cfgdef = dict()
|
|
|
|
elif value and os.path.exists(file):
|
|
|
|
fp = open(file, 'r+')
|
|
|
|
if fmt == 'radio':
|
|
|
|
m = re.match('.*\[(?P<v>.*)\].*', fp.read())
|
|
|
|
if m:
|
|
|
|
self.cfgdef[file] = m.group('v')
|
|
|
|
elif fmt == 'acpi':
|
|
|
|
line = fp.read().strip().split('\n')[-1]
|
|
|
|
m = re.match('.* (?P<v>[0-9A-Fx]*) .*', line)
|
|
|
|
if m:
|
|
|
|
self.cfgdef[file] = m.group('v')
|
|
|
|
else:
|
|
|
|
self.cfgdef[file] = fp.read().strip()
|
|
|
|
fp.write(value)
|
|
|
|
fp.close()
|
2019-05-14 17:53:57 +00:00
|
|
|
def haveTurbostat(self):
|
2019-05-14 17:53:58 +00:00
|
|
|
if not self.tstat:
|
|
|
|
return False
|
2019-05-14 17:53:57 +00:00
|
|
|
cmd = self.getExec('turbostat')
|
|
|
|
if not cmd:
|
|
|
|
return False
|
|
|
|
fp = Popen([cmd, '-v'], stdout=PIPE, stderr=PIPE).stderr
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
out = ascii(fp.read()).strip()
|
2019-05-14 17:53:57 +00:00
|
|
|
fp.close()
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
if re.match('turbostat version .*', out):
|
|
|
|
self.vprint(out)
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
return True
|
|
|
|
return False
|
2019-05-14 17:53:57 +00:00
|
|
|
def turbostat(self):
|
|
|
|
cmd = self.getExec('turbostat')
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
rawout = keyline = valline = ''
|
2019-05-14 17:53:58 +00:00
|
|
|
fullcmd = '%s -q -S echo freeze > %s' % (cmd, self.powerfile)
|
|
|
|
fp = Popen(['sh', '-c', fullcmd], stdout=PIPE, stderr=PIPE).stderr
|
2019-05-14 17:53:57 +00:00
|
|
|
for line in fp:
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
line = ascii(line)
|
|
|
|
rawout += line
|
|
|
|
if keyline and valline:
|
2019-05-14 17:53:57 +00:00
|
|
|
continue
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
if re.match('(?i)Avg_MHz.*', line):
|
|
|
|
keyline = line.strip().split()
|
|
|
|
elif keyline:
|
|
|
|
valline = line.strip().split()
|
2019-05-14 17:53:57 +00:00
|
|
|
fp.close()
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
if not keyline or not valline or len(keyline) != len(valline):
|
|
|
|
errmsg = 'unrecognized turbostat output:\n'+rawout.strip()
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
self.vprint(errmsg)
|
|
|
|
if not self.verbose:
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
pprint(errmsg)
|
|
|
|
return ''
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
if self.verbose:
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
pprint(rawout.strip())
|
2019-05-14 17:53:57 +00:00
|
|
|
out = []
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
for key in keyline:
|
|
|
|
idx = keyline.index(key)
|
|
|
|
val = valline[idx]
|
|
|
|
out.append('%s=%s' % (key, val))
|
2019-05-14 17:53:57 +00:00
|
|
|
return '|'.join(out)
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
def wifiDetails(self, dev):
|
|
|
|
try:
|
|
|
|
info = open('/sys/class/net/%s/device/uevent' % dev, 'r').read().strip()
|
|
|
|
except:
|
|
|
|
return dev
|
|
|
|
vals = [dev]
|
|
|
|
for prop in info.split('\n'):
|
|
|
|
if prop.startswith('DRIVER=') or prop.startswith('PCI_ID='):
|
|
|
|
vals.append(prop.split('=')[-1])
|
|
|
|
return ':'.join(vals)
|
|
|
|
def checkWifi(self, dev=''):
|
|
|
|
try:
|
|
|
|
w = open('/proc/net/wireless', 'r').read().strip()
|
|
|
|
except:
|
|
|
|
return ''
|
|
|
|
for line in reversed(w.split('\n')):
|
|
|
|
m = re.match(' *(?P<dev>.*): (?P<stat>[0-9a-f]*) .*', w.split('\n')[-1])
|
|
|
|
if not m or (dev and dev != m.group('dev')):
|
2019-05-14 17:53:58 +00:00
|
|
|
continue
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
return m.group('dev')
|
|
|
|
return ''
|
|
|
|
def pollWifi(self, dev, timeout=60):
|
|
|
|
start = time.time()
|
|
|
|
while (time.time() - start) < timeout:
|
|
|
|
w = self.checkWifi(dev)
|
|
|
|
if w:
|
|
|
|
return '%s reconnected %.2f' % \
|
|
|
|
(self.wifiDetails(dev), max(0, time.time() - start))
|
|
|
|
time.sleep(0.01)
|
|
|
|
return '%s timeout %d' % (self.wifiDetails(dev), timeout)
|
2019-05-14 17:53:58 +00:00
|
|
|
def errorSummary(self, errinfo, msg):
|
|
|
|
found = False
|
|
|
|
for entry in errinfo:
|
|
|
|
if re.match(entry['match'], msg):
|
|
|
|
entry['count'] += 1
|
|
|
|
if self.hostname not in entry['urls']:
|
|
|
|
entry['urls'][self.hostname] = [self.htmlfile]
|
|
|
|
elif self.htmlfile not in entry['urls'][self.hostname]:
|
|
|
|
entry['urls'][self.hostname].append(self.htmlfile)
|
|
|
|
found = True
|
|
|
|
break
|
|
|
|
if found:
|
|
|
|
return
|
|
|
|
arr = msg.split()
|
|
|
|
for j in range(len(arr)):
|
|
|
|
if re.match('^[0-9,\-\.]*$', arr[j]):
|
|
|
|
arr[j] = '[0-9,\-\.]*'
|
|
|
|
else:
|
|
|
|
arr[j] = arr[j]\
|
|
|
|
.replace('\\', '\\\\').replace(']', '\]').replace('[', '\[')\
|
|
|
|
.replace('.', '\.').replace('+', '\+').replace('*', '\*')\
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
.replace('(', '\(').replace(')', '\)').replace('}', '\}')\
|
|
|
|
.replace('{', '\{')
|
|
|
|
mstr = ' *'.join(arr)
|
2019-05-14 17:53:58 +00:00
|
|
|
entry = {
|
|
|
|
'line': msg,
|
|
|
|
'match': mstr,
|
|
|
|
'count': 1,
|
|
|
|
'urls': {self.hostname: [self.htmlfile]}
|
|
|
|
}
|
|
|
|
errinfo.append(entry)
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
def multistat(self, start, idx, finish):
|
|
|
|
if 'time' in self.multitest:
|
|
|
|
id = '%d Duration=%dmin' % (idx+1, self.multitest['time'])
|
|
|
|
else:
|
|
|
|
id = '%d/%d' % (idx+1, self.multitest['count'])
|
|
|
|
t = time.time()
|
|
|
|
if 'start' not in self.multitest:
|
|
|
|
self.multitest['start'] = self.multitest['last'] = t
|
|
|
|
self.multitest['total'] = 0.0
|
|
|
|
pprint('TEST (%s) START' % id)
|
|
|
|
return
|
|
|
|
dt = t - self.multitest['last']
|
|
|
|
if not start:
|
|
|
|
if idx == 0 and self.multitest['delay'] > 0:
|
|
|
|
self.multitest['total'] += self.multitest['delay']
|
|
|
|
pprint('TEST (%s) COMPLETE -- Duration %.1fs' % (id, dt))
|
|
|
|
return
|
|
|
|
self.multitest['total'] += dt
|
|
|
|
self.multitest['last'] = t
|
|
|
|
avg = self.multitest['total'] / idx
|
|
|
|
if 'time' in self.multitest:
|
|
|
|
left = finish - datetime.now()
|
|
|
|
left -= timedelta(microseconds=left.microseconds)
|
|
|
|
else:
|
|
|
|
left = timedelta(seconds=((self.multitest['count'] - idx) * int(avg)))
|
|
|
|
pprint('TEST (%s) START - Avg Duration %.1fs, Time left %s' % \
|
|
|
|
(id, avg, str(left)))
|
|
|
|
def multiinit(self, c, d):
|
|
|
|
sz, unit = 'count', 'm'
|
|
|
|
if c.endswith('d') or c.endswith('h') or c.endswith('m'):
|
|
|
|
sz, unit, c = 'time', c[-1], c[:-1]
|
|
|
|
self.multitest['run'] = True
|
|
|
|
self.multitest[sz] = getArgInt('multi: n d (exec count)', c, 1, 1000000, False)
|
|
|
|
self.multitest['delay'] = getArgInt('multi: n d (delay between tests)', d, 0, 3600, False)
|
|
|
|
if unit == 'd':
|
|
|
|
self.multitest[sz] *= 1440
|
|
|
|
elif unit == 'h':
|
|
|
|
self.multitest[sz] *= 60
|
2020-11-11 02:36:17 +00:00
|
|
|
def displayControl(self, cmd):
|
|
|
|
xset, ret = 'timeout 10 xset -d :0.0 {0}', 0
|
|
|
|
if self.sudouser:
|
|
|
|
xset = 'sudo -u %s %s' % (self.sudouser, xset)
|
|
|
|
if cmd == 'init':
|
|
|
|
ret = call(xset.format('dpms 0 0 0'), shell=True)
|
|
|
|
if not ret:
|
|
|
|
ret = call(xset.format('s off'), shell=True)
|
|
|
|
elif cmd == 'reset':
|
|
|
|
ret = call(xset.format('s reset'), shell=True)
|
|
|
|
elif cmd in ['on', 'off', 'standby', 'suspend']:
|
|
|
|
b4 = self.displayControl('stat')
|
|
|
|
ret = call(xset.format('dpms force %s' % cmd), shell=True)
|
|
|
|
if not ret:
|
|
|
|
curr = self.displayControl('stat')
|
|
|
|
self.vprint('Display Switched: %s -> %s' % (b4, curr))
|
|
|
|
if curr != cmd:
|
|
|
|
self.vprint('WARNING: Display failed to change to %s' % cmd)
|
|
|
|
if ret:
|
|
|
|
self.vprint('WARNING: Display failed to change to %s with xset' % cmd)
|
|
|
|
return ret
|
|
|
|
elif cmd == 'stat':
|
|
|
|
fp = Popen(xset.format('q').split(' '), stdout=PIPE).stdout
|
|
|
|
ret = 'unknown'
|
|
|
|
for line in fp:
|
|
|
|
m = re.match('[\s]*Monitor is (?P<m>.*)', ascii(line))
|
|
|
|
if(m and len(m.group('m')) >= 2):
|
|
|
|
out = m.group('m').lower()
|
|
|
|
ret = out[3:] if out[0:2] == 'in' else out
|
|
|
|
break
|
|
|
|
fp.close()
|
|
|
|
return ret
|
|
|
|
def setRuntimeSuspend(self, before=True):
|
|
|
|
if before:
|
|
|
|
# runtime suspend disable or enable
|
|
|
|
if self.rs > 0:
|
|
|
|
self.rstgt, self.rsval, self.rsdir = 'on', 'auto', 'enabled'
|
|
|
|
else:
|
|
|
|
self.rstgt, self.rsval, self.rsdir = 'auto', 'on', 'disabled'
|
|
|
|
pprint('CONFIGURING RUNTIME SUSPEND...')
|
|
|
|
self.rslist = deviceInfo(self.rstgt)
|
|
|
|
for i in self.rslist:
|
|
|
|
self.setVal(self.rsval, i)
|
|
|
|
pprint('runtime suspend %s on all devices (%d changed)' % (self.rsdir, len(self.rslist)))
|
|
|
|
pprint('waiting 5 seconds...')
|
|
|
|
time.sleep(5)
|
|
|
|
else:
|
|
|
|
# runtime suspend re-enable or re-disable
|
|
|
|
for i in self.rslist:
|
|
|
|
self.setVal(self.rstgt, i)
|
|
|
|
pprint('runtime suspend settings restored on %d devices' % len(self.rslist))
|
2014-01-17 00:18:22 +00:00
|
|
|
|
2014-08-08 16:11:59 +00:00
|
|
|
sysvals = SystemValues()
|
2018-01-30 08:17:20 +00:00
|
|
|
switchvalues = ['enable', 'disable', 'on', 'off', 'true', 'false', '1', '0']
|
|
|
|
switchoff = ['disable', 'off', 'false', '0']
|
2017-04-07 18:05:35 +00:00
|
|
|
suspendmodename = {
|
|
|
|
'freeze': 'Freeze (S0)',
|
|
|
|
'standby': 'Standby (S1)',
|
|
|
|
'mem': 'Suspend (S3)',
|
|
|
|
'disk': 'Hibernate (S4)'
|
|
|
|
}
|
2014-08-08 16:11:59 +00:00
|
|
|
|
2016-07-15 21:34:14 +00:00
|
|
|
# Class: DevProps
|
|
|
|
# Description:
|
|
|
|
# Simple class which holds property values collected
|
|
|
|
# for all the devices used in the timeline.
|
|
|
|
class DevProps:
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
def __init__(self):
|
|
|
|
self.syspath = ''
|
|
|
|
self.altname = ''
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
self.isasync = True
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
self.xtraclass = ''
|
|
|
|
self.xtrainfo = ''
|
2016-07-15 21:34:14 +00:00
|
|
|
def out(self, dev):
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
return '%s,%s,%d;' % (dev, self.altname, self.isasync)
|
2016-07-15 21:34:14 +00:00
|
|
|
def debug(self, dev):
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
pprint('%s:\n\taltname = %s\n\t async = %s' % (dev, self.altname, self.isasync))
|
2016-07-15 21:34:14 +00:00
|
|
|
def altName(self, dev):
|
|
|
|
if not self.altname or self.altname == dev:
|
|
|
|
return dev
|
|
|
|
return '%s [%s]' % (self.altname, dev)
|
|
|
|
def xtraClass(self):
|
|
|
|
if self.xtraclass:
|
|
|
|
return ' '+self.xtraclass
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
if not self.isasync:
|
2016-07-15 21:34:14 +00:00
|
|
|
return ' sync'
|
|
|
|
return ''
|
|
|
|
def xtraInfo(self):
|
|
|
|
if self.xtraclass:
|
|
|
|
return ' '+self.xtraclass
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
if self.isasync:
|
2020-07-21 01:02:49 +00:00
|
|
|
return ' (async)'
|
|
|
|
return ' (sync)'
|
2016-07-15 21:34:14 +00:00
|
|
|
|
2014-08-08 16:11:59 +00:00
|
|
|
# Class: DeviceNode
|
|
|
|
# Description:
|
|
|
|
# A container used to create a device hierachy, with a single root node
|
|
|
|
# and a tree of child nodes. Used by Data.deviceTopology()
|
|
|
|
class DeviceNode:
|
|
|
|
def __init__(self, nodename, nodedepth):
|
|
|
|
self.name = nodename
|
|
|
|
self.children = []
|
|
|
|
self.depth = nodedepth
|
|
|
|
|
|
|
|
# Class: Data
|
|
|
|
# Description:
|
|
|
|
# The primary container for suspend/resume test data. There is one for
|
|
|
|
# each test run. The data is organized into a cronological hierarchy:
|
|
|
|
# Data.dmesg {
|
|
|
|
# phases {
|
|
|
|
# 10 sequential, non-overlapping phases of S/R
|
|
|
|
# contents: times for phase start/end, order/color data for html
|
|
|
|
# devlist {
|
|
|
|
# device callback or action list for this phase
|
|
|
|
# device {
|
|
|
|
# a single device callback or generic action
|
|
|
|
# contents: start/stop times, pid/cpu/driver info
|
|
|
|
# parents/children, html id for timeline/callgraph
|
|
|
|
# optionally includes an ftrace callgraph
|
2016-12-14 18:37:07 +00:00
|
|
|
# optionally includes dev/ps data
|
2014-08-08 16:11:59 +00:00
|
|
|
# }
|
|
|
|
# }
|
|
|
|
# }
|
|
|
|
# }
|
|
|
|
#
|
2014-01-17 00:18:22 +00:00
|
|
|
class Data:
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
phasedef = {
|
|
|
|
'suspend_prepare': {'order': 0, 'color': '#CCFFCC'},
|
|
|
|
'suspend': {'order': 1, 'color': '#88FF88'},
|
|
|
|
'suspend_late': {'order': 2, 'color': '#00AA00'},
|
|
|
|
'suspend_noirq': {'order': 3, 'color': '#008888'},
|
|
|
|
'suspend_machine': {'order': 4, 'color': '#0000FF'},
|
|
|
|
'resume_machine': {'order': 5, 'color': '#FF0000'},
|
|
|
|
'resume_noirq': {'order': 6, 'color': '#FF9900'},
|
|
|
|
'resume_early': {'order': 7, 'color': '#FFCC00'},
|
|
|
|
'resume': {'order': 8, 'color': '#FFFF88'},
|
|
|
|
'resume_complete': {'order': 9, 'color': '#FFFFCC'},
|
|
|
|
}
|
|
|
|
errlist = {
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
'HWERROR' : r'.*\[ *Hardware Error *\].*',
|
|
|
|
'FWBUG' : r'.*\[ *Firmware Bug *\].*',
|
|
|
|
'BUG' : r'(?i).*\bBUG\b.*',
|
|
|
|
'ERROR' : r'(?i).*\bERROR\b.*',
|
|
|
|
'WARNING' : r'(?i).*\bWARNING\b.*',
|
|
|
|
'FAULT' : r'(?i).*\bFAULT\b.*',
|
|
|
|
'FAIL' : r'(?i).*\bFAILED\b.*',
|
|
|
|
'INVALID' : r'(?i).*\bINVALID\b.*',
|
|
|
|
'CRASH' : r'(?i).*\bCRASHED\b.*',
|
2020-07-21 01:02:49 +00:00
|
|
|
'TIMEOUT' : r'(?i).*\bTIMEOUT\b.*',
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
'IRQ' : r'.*\bgenirq: .*',
|
|
|
|
'TASKFAIL': r'.*Freezing of tasks *.*',
|
|
|
|
'ACPI' : r'.*\bACPI *(?P<b>[A-Za-z]*) *Error[: ].*',
|
|
|
|
'DISKFULL': r'.*\bNo space left on device.*',
|
|
|
|
'USBERR' : r'.*usb .*device .*, error [0-9-]*',
|
|
|
|
'ATAERR' : r' *ata[0-9\.]*: .*failed.*',
|
|
|
|
'MEIERR' : r' *mei.*: .*failed.*',
|
|
|
|
'TPMERR' : r'(?i) *tpm *tpm[0-9]*: .*error.*',
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
}
|
2014-08-08 16:11:59 +00:00
|
|
|
def __init__(self, num):
|
2016-12-14 18:37:07 +00:00
|
|
|
idchar = 'abcdefghij'
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
self.start = 0.0 # test start
|
|
|
|
self.end = 0.0 # test end
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
self.hwstart = 0 # rtc test start
|
|
|
|
self.hwend = 0 # rtc test end
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
self.tSuspended = 0.0 # low-level suspend start
|
|
|
|
self.tResumed = 0.0 # low-level resume start
|
|
|
|
self.tKernSus = 0.0 # kernel level suspend start
|
|
|
|
self.tKernRes = 0.0 # kernel level resume end
|
|
|
|
self.fwValid = False # is firmware data available
|
|
|
|
self.fwSuspend = 0 # time spent in firmware suspend
|
|
|
|
self.fwResume = 0 # time spent in firmware resume
|
|
|
|
self.html_device_id = 0
|
|
|
|
self.stamp = 0
|
|
|
|
self.outfile = ''
|
|
|
|
self.kerror = False
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
self.wifi = dict()
|
2019-05-14 17:53:57 +00:00
|
|
|
self.turbostat = 0
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
self.enterfail = ''
|
|
|
|
self.currphase = ''
|
|
|
|
self.pstl = dict() # process timeline
|
2014-08-08 16:11:59 +00:00
|
|
|
self.testnumber = num
|
|
|
|
self.idstr = idchar[num]
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
self.dmesgtext = [] # dmesg text file in memory
|
|
|
|
self.dmesg = dict() # root data structure
|
|
|
|
self.errorinfo = {'suspend':[],'resume':[]}
|
|
|
|
self.tLow = [] # time spent in low-level suspends (standby/freeze)
|
|
|
|
self.devpids = []
|
|
|
|
self.devicegroups = 0
|
|
|
|
def sortedPhases(self):
|
|
|
|
return sorted(self.dmesg, key=lambda k:self.dmesg[k]['order'])
|
|
|
|
def initDevicegroups(self):
|
|
|
|
# called when phases are all finished being added
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
for phase in sorted(self.dmesg.keys()):
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
if '*' in phase:
|
|
|
|
p = phase.split('*')
|
|
|
|
pnew = '%s%d' % (p[0], len(p))
|
|
|
|
self.dmesg[pnew] = self.dmesg.pop(phase)
|
2016-07-15 21:34:14 +00:00
|
|
|
self.devicegroups = []
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
for phase in self.sortedPhases():
|
2016-07-15 21:34:14 +00:00
|
|
|
self.devicegroups.append([phase])
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
def nextPhase(self, phase, offset):
|
|
|
|
order = self.dmesg[phase]['order'] + offset
|
|
|
|
for p in self.dmesg:
|
|
|
|
if self.dmesg[p]['order'] == order:
|
|
|
|
return p
|
|
|
|
return ''
|
2020-07-21 01:02:49 +00:00
|
|
|
def lastPhase(self, depth=1):
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
plist = self.sortedPhases()
|
2020-07-21 01:02:49 +00:00
|
|
|
if len(plist) < depth:
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
return ''
|
2020-07-21 01:02:49 +00:00
|
|
|
return plist[-1*depth]
|
2019-05-14 17:53:58 +00:00
|
|
|
def turbostatInfo(self):
|
|
|
|
tp = TestProps()
|
|
|
|
out = {'syslpi':'N/A','pkgpc10':'N/A'}
|
|
|
|
for line in self.dmesgtext:
|
|
|
|
m = re.match(tp.tstatfmt, line)
|
|
|
|
if not m:
|
|
|
|
continue
|
|
|
|
for i in m.group('t').split('|'):
|
|
|
|
if 'SYS%LPI' in i:
|
|
|
|
out['syslpi'] = i.split('=')[-1]+'%'
|
|
|
|
elif 'pc10' in i:
|
|
|
|
out['pkgpc10'] = i.split('=')[-1]+'%'
|
|
|
|
break
|
|
|
|
return out
|
2018-01-30 08:17:20 +00:00
|
|
|
def extractErrorInfo(self):
|
2019-05-14 17:53:57 +00:00
|
|
|
lf = self.dmesgtext
|
|
|
|
if len(self.dmesgtext) < 1 and sysvals.dmesgfile:
|
|
|
|
lf = sysvals.openlog(sysvals.dmesgfile, 'r')
|
2018-01-30 08:17:20 +00:00
|
|
|
i = 0
|
2020-07-21 01:02:49 +00:00
|
|
|
tp = TestProps()
|
2018-01-30 08:17:20 +00:00
|
|
|
list = []
|
|
|
|
for line in lf:
|
|
|
|
i += 1
|
2020-07-21 01:02:49 +00:00
|
|
|
if tp.stampInfo(line, sysvals):
|
|
|
|
continue
|
2018-01-30 08:17:20 +00:00
|
|
|
m = re.match('[ \t]*(\[ *)(?P<ktime>[0-9\.]*)(\]) (?P<msg>.*)', line)
|
|
|
|
if not m:
|
2016-12-14 18:37:07 +00:00
|
|
|
continue
|
2018-01-30 08:17:20 +00:00
|
|
|
t = float(m.group('ktime'))
|
|
|
|
if t < self.start or t > self.end:
|
|
|
|
continue
|
2018-05-24 16:36:28 +00:00
|
|
|
dir = 'suspend' if t < self.tSuspended else 'resume'
|
2018-01-30 08:17:20 +00:00
|
|
|
msg = m.group('msg')
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
if re.match('capability: warning: .*', msg):
|
|
|
|
continue
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
for err in self.errlist:
|
|
|
|
if re.match(self.errlist[err], msg):
|
2019-05-14 17:53:58 +00:00
|
|
|
list.append((msg, err, dir, t, i, i))
|
2018-01-30 08:17:20 +00:00
|
|
|
self.kerror = True
|
2018-05-24 16:36:28 +00:00
|
|
|
break
|
2020-07-21 01:02:49 +00:00
|
|
|
tp.msglist = []
|
2019-05-14 17:53:58 +00:00
|
|
|
for msg, type, dir, t, idx1, idx2 in list:
|
2020-07-21 01:02:49 +00:00
|
|
|
tp.msglist.append(msg)
|
2018-01-30 08:17:20 +00:00
|
|
|
self.errorinfo[dir].append((type, t, idx1, idx2))
|
|
|
|
if self.kerror:
|
|
|
|
sysvals.dmesglog = True
|
2019-05-14 17:53:57 +00:00
|
|
|
if len(self.dmesgtext) < 1 and sysvals.dmesgfile:
|
|
|
|
lf.close()
|
2020-07-21 01:02:49 +00:00
|
|
|
return tp
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
def setStart(self, time, msg=''):
|
2014-08-08 16:11:59 +00:00
|
|
|
self.start = time
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
if msg:
|
|
|
|
try:
|
|
|
|
self.hwstart = datetime.strptime(msg, sysvals.tmstart)
|
|
|
|
except:
|
|
|
|
self.hwstart = 0
|
|
|
|
def setEnd(self, time, msg=''):
|
2014-08-08 16:11:59 +00:00
|
|
|
self.end = time
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
if msg:
|
|
|
|
try:
|
|
|
|
self.hwend = datetime.strptime(msg, sysvals.tmend)
|
|
|
|
except:
|
|
|
|
self.hwend = 0
|
2014-08-08 16:11:59 +00:00
|
|
|
def isTraceEventOutsideDeviceCalls(self, pid, time):
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
for phase in self.sortedPhases():
|
2014-08-08 16:11:59 +00:00
|
|
|
list = self.dmesg[phase]['list']
|
|
|
|
for dev in list:
|
|
|
|
d = list[dev]
|
|
|
|
if(d['pid'] == pid and time >= d['start'] and
|
2016-07-15 21:34:14 +00:00
|
|
|
time < d['end']):
|
2014-08-08 16:11:59 +00:00
|
|
|
return False
|
|
|
|
return True
|
2016-12-14 18:37:07 +00:00
|
|
|
def sourcePhase(self, start):
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
for phase in self.sortedPhases():
|
|
|
|
if 'machine' in phase:
|
|
|
|
continue
|
2016-12-14 18:37:05 +00:00
|
|
|
pend = self.dmesg[phase]['end']
|
|
|
|
if start <= pend:
|
|
|
|
return phase
|
|
|
|
return 'resume_complete'
|
|
|
|
def sourceDevice(self, phaselist, start, end, pid, type):
|
2016-07-15 21:34:14 +00:00
|
|
|
tgtdev = ''
|
|
|
|
for phase in phaselist:
|
2014-08-08 16:11:59 +00:00
|
|
|
list = self.dmesg[phase]['list']
|
2016-07-15 21:34:14 +00:00
|
|
|
for devname in list:
|
|
|
|
dev = list[devname]
|
2016-12-14 18:37:05 +00:00
|
|
|
# pid must match
|
|
|
|
if dev['pid'] != pid:
|
2016-07-15 21:34:14 +00:00
|
|
|
continue
|
|
|
|
devS = dev['start']
|
|
|
|
devE = dev['end']
|
2016-12-14 18:37:05 +00:00
|
|
|
if type == 'device':
|
|
|
|
# device target event is entirely inside the source boundary
|
|
|
|
if(start < devS or start >= devE or end <= devS or end > devE):
|
|
|
|
continue
|
|
|
|
elif type == 'thread':
|
|
|
|
# thread target event will expand the source boundary
|
|
|
|
if start < devS:
|
|
|
|
dev['start'] = start
|
|
|
|
if end > devE:
|
|
|
|
dev['end'] = end
|
2016-07-15 21:34:14 +00:00
|
|
|
tgtdev = dev
|
|
|
|
break
|
|
|
|
return tgtdev
|
|
|
|
def addDeviceFunctionCall(self, displayname, kprobename, proc, pid, start, end, cdata, rdata):
|
2016-12-14 18:37:05 +00:00
|
|
|
# try to place the call in a device
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
phases = self.sortedPhases()
|
|
|
|
tgtdev = self.sourceDevice(phases, start, end, pid, 'device')
|
2016-12-14 18:37:06 +00:00
|
|
|
# calls with device pids that occur outside device bounds are dropped
|
|
|
|
# TODO: include these somehow
|
2016-12-14 18:37:05 +00:00
|
|
|
if not tgtdev and pid in self.devpids:
|
|
|
|
return False
|
|
|
|
# try to place the call in a thread
|
|
|
|
if not tgtdev:
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
tgtdev = self.sourceDevice(phases, start, end, pid, 'thread')
|
2016-12-14 18:37:05 +00:00
|
|
|
# create new thread blocks, expand as new calls are found
|
2016-07-15 21:34:14 +00:00
|
|
|
if not tgtdev:
|
2016-12-14 18:37:05 +00:00
|
|
|
if proc == '<...>':
|
|
|
|
threadname = 'kthread-%d' % (pid)
|
2016-07-15 21:34:14 +00:00
|
|
|
else:
|
2016-12-14 18:37:05 +00:00
|
|
|
threadname = '%s-%d' % (proc, pid)
|
2016-12-14 18:37:07 +00:00
|
|
|
tgtphase = self.sourcePhase(start)
|
2016-12-14 18:37:05 +00:00
|
|
|
self.newAction(tgtphase, threadname, pid, '', start, end, '', ' kth', '')
|
|
|
|
return self.addDeviceFunctionCall(displayname, kprobename, proc, pid, start, end, cdata, rdata)
|
|
|
|
# this should not happen
|
|
|
|
if not tgtdev:
|
2018-01-30 08:17:20 +00:00
|
|
|
sysvals.vprint('[%f - %f] %s-%d %s %s %s' % \
|
2016-12-14 18:37:05 +00:00
|
|
|
(start, end, proc, pid, kprobename, cdata, rdata))
|
2016-07-15 21:34:14 +00:00
|
|
|
return False
|
2016-12-14 18:37:05 +00:00
|
|
|
# place the call data inside the src element of the tgtdev
|
2016-07-15 21:34:14 +00:00
|
|
|
if('src' not in tgtdev):
|
|
|
|
tgtdev['src'] = []
|
2016-12-14 18:37:07 +00:00
|
|
|
dtf = sysvals.dev_tracefuncs
|
2016-12-14 18:37:05 +00:00
|
|
|
ubiquitous = False
|
2016-12-14 18:37:07 +00:00
|
|
|
if kprobename in dtf and 'ub' in dtf[kprobename]:
|
2016-12-14 18:37:05 +00:00
|
|
|
ubiquitous = True
|
2016-07-15 21:34:14 +00:00
|
|
|
title = cdata+' '+rdata
|
|
|
|
mstr = '\(.*\) *(?P<args>.*) *\((?P<caller>.*)\+.* arg1=(?P<ret>.*)'
|
|
|
|
m = re.match(mstr, title)
|
|
|
|
if m:
|
|
|
|
c = m.group('caller')
|
|
|
|
a = m.group('args').strip()
|
|
|
|
r = m.group('ret')
|
|
|
|
if len(r) > 6:
|
|
|
|
r = ''
|
|
|
|
else:
|
|
|
|
r = 'ret=%s ' % r
|
2016-12-14 18:37:07 +00:00
|
|
|
if ubiquitous and c in dtf and 'ub' in dtf[c]:
|
2016-12-14 18:37:05 +00:00
|
|
|
return False
|
2016-12-14 18:37:06 +00:00
|
|
|
color = sysvals.kprobeColor(kprobename)
|
|
|
|
e = DevFunction(displayname, a, c, r, start, end, ubiquitous, proc, pid, color)
|
2016-07-15 21:34:14 +00:00
|
|
|
tgtdev['src'].append(e)
|
|
|
|
return True
|
2016-12-14 18:37:05 +00:00
|
|
|
def overflowDevices(self):
|
|
|
|
# get a list of devices that extend beyond the end of this test run
|
|
|
|
devlist = []
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
for phase in self.sortedPhases():
|
2016-12-14 18:37:05 +00:00
|
|
|
list = self.dmesg[phase]['list']
|
|
|
|
for devname in list:
|
|
|
|
dev = list[devname]
|
|
|
|
if dev['end'] > self.end:
|
|
|
|
devlist.append(dev)
|
|
|
|
return devlist
|
|
|
|
def mergeOverlapDevices(self, devlist):
|
|
|
|
# merge any devices that overlap devlist
|
|
|
|
for dev in devlist:
|
|
|
|
devname = dev['name']
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
for phase in self.sortedPhases():
|
2016-12-14 18:37:05 +00:00
|
|
|
list = self.dmesg[phase]['list']
|
|
|
|
if devname not in list:
|
|
|
|
continue
|
|
|
|
tdev = list[devname]
|
|
|
|
o = min(dev['end'], tdev['end']) - max(dev['start'], tdev['start'])
|
|
|
|
if o <= 0:
|
|
|
|
continue
|
|
|
|
dev['end'] = tdev['end']
|
|
|
|
if 'src' not in dev or 'src' not in tdev:
|
|
|
|
continue
|
|
|
|
dev['src'] += tdev['src']
|
|
|
|
del list[devname]
|
2016-12-14 18:37:06 +00:00
|
|
|
def usurpTouchingThread(self, name, dev):
|
|
|
|
# the caller test has priority of this thread, give it to him
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
for phase in self.sortedPhases():
|
2016-12-14 18:37:06 +00:00
|
|
|
list = self.dmesg[phase]['list']
|
|
|
|
if name in list:
|
|
|
|
tdev = list[name]
|
|
|
|
if tdev['start'] - dev['end'] < 0.1:
|
|
|
|
dev['end'] = tdev['end']
|
|
|
|
if 'src' not in dev:
|
|
|
|
dev['src'] = []
|
|
|
|
if 'src' in tdev:
|
|
|
|
dev['src'] += tdev['src']
|
|
|
|
del list[name]
|
|
|
|
break
|
|
|
|
def stitchTouchingThreads(self, testlist):
|
|
|
|
# merge any threads between tests that touch
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
for phase in self.sortedPhases():
|
2016-12-14 18:37:06 +00:00
|
|
|
list = self.dmesg[phase]['list']
|
|
|
|
for devname in list:
|
|
|
|
dev = list[devname]
|
|
|
|
if 'htmlclass' not in dev or 'kth' not in dev['htmlclass']:
|
|
|
|
continue
|
|
|
|
for data in testlist:
|
|
|
|
data.usurpTouchingThread(devname, dev)
|
2016-12-14 18:37:05 +00:00
|
|
|
def optimizeDevSrc(self):
|
|
|
|
# merge any src call loops to reduce timeline size
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
for phase in self.sortedPhases():
|
2016-12-14 18:37:05 +00:00
|
|
|
list = self.dmesg[phase]['list']
|
|
|
|
for dev in list:
|
|
|
|
if 'src' not in list[dev]:
|
|
|
|
continue
|
|
|
|
src = list[dev]['src']
|
|
|
|
p = 0
|
|
|
|
for e in sorted(src, key=lambda event: event.time):
|
|
|
|
if not p or not e.repeat(p):
|
|
|
|
p = e
|
|
|
|
continue
|
|
|
|
# e is another iteration of p, move it into p
|
|
|
|
p.end = e.end
|
|
|
|
p.length = p.end - p.time
|
|
|
|
p.count += 1
|
|
|
|
src.remove(e)
|
2014-08-08 16:11:59 +00:00
|
|
|
def trimTimeVal(self, t, t0, dT, left):
|
|
|
|
if left:
|
|
|
|
if(t > t0):
|
|
|
|
if(t - dT < t0):
|
|
|
|
return t0
|
|
|
|
return t - dT
|
|
|
|
else:
|
|
|
|
return t
|
|
|
|
else:
|
|
|
|
if(t < t0 + dT):
|
|
|
|
if(t > t0):
|
|
|
|
return t0 + dT
|
|
|
|
return t + dT
|
|
|
|
else:
|
|
|
|
return t
|
|
|
|
def trimTime(self, t0, dT, left):
|
|
|
|
self.tSuspended = self.trimTimeVal(self.tSuspended, t0, dT, left)
|
|
|
|
self.tResumed = self.trimTimeVal(self.tResumed, t0, dT, left)
|
|
|
|
self.start = self.trimTimeVal(self.start, t0, dT, left)
|
2016-12-14 18:37:07 +00:00
|
|
|
self.tKernSus = self.trimTimeVal(self.tKernSus, t0, dT, left)
|
|
|
|
self.tKernRes = self.trimTimeVal(self.tKernRes, t0, dT, left)
|
2014-08-08 16:11:59 +00:00
|
|
|
self.end = self.trimTimeVal(self.end, t0, dT, left)
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
for phase in self.sortedPhases():
|
2014-01-17 00:18:22 +00:00
|
|
|
p = self.dmesg[phase]
|
2014-08-08 16:11:59 +00:00
|
|
|
p['start'] = self.trimTimeVal(p['start'], t0, dT, left)
|
|
|
|
p['end'] = self.trimTimeVal(p['end'], t0, dT, left)
|
2014-01-17 00:18:22 +00:00
|
|
|
list = p['list']
|
|
|
|
for name in list:
|
|
|
|
d = list[name]
|
2014-08-08 16:11:59 +00:00
|
|
|
d['start'] = self.trimTimeVal(d['start'], t0, dT, left)
|
|
|
|
d['end'] = self.trimTimeVal(d['end'], t0, dT, left)
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
d['length'] = d['end'] - d['start']
|
2014-01-17 00:18:22 +00:00
|
|
|
if('ftrace' in d):
|
|
|
|
cg = d['ftrace']
|
2014-08-08 16:11:59 +00:00
|
|
|
cg.start = self.trimTimeVal(cg.start, t0, dT, left)
|
|
|
|
cg.end = self.trimTimeVal(cg.end, t0, dT, left)
|
2014-01-17 00:18:22 +00:00
|
|
|
for line in cg.list:
|
2014-08-08 16:11:59 +00:00
|
|
|
line.time = self.trimTimeVal(line.time, t0, dT, left)
|
2016-07-15 21:34:14 +00:00
|
|
|
if('src' in d):
|
|
|
|
for e in d['src']:
|
2014-08-08 16:11:59 +00:00
|
|
|
e.time = self.trimTimeVal(e.time, t0, dT, left)
|
2020-07-21 01:02:49 +00:00
|
|
|
e.end = self.trimTimeVal(e.end, t0, dT, left)
|
|
|
|
e.length = e.end - e.time
|
2018-01-30 08:17:20 +00:00
|
|
|
for dir in ['suspend', 'resume']:
|
|
|
|
list = []
|
|
|
|
for e in self.errorinfo[dir]:
|
|
|
|
type, tm, idx1, idx2 = e
|
|
|
|
tm = self.trimTimeVal(tm, t0, dT, left)
|
|
|
|
list.append((type, tm, idx1, idx2))
|
|
|
|
self.errorinfo[dir] = list
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
def trimFreezeTime(self, tZero):
|
2016-07-15 21:34:14 +00:00
|
|
|
# trim out any standby or freeze clock time
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
lp = ''
|
|
|
|
for phase in self.sortedPhases():
|
|
|
|
if 'resume_machine' in phase and 'suspend_machine' in lp:
|
|
|
|
tS, tR = self.dmesg[lp]['end'], self.dmesg[phase]['start']
|
|
|
|
tL = tR - tS
|
2020-11-11 02:36:17 +00:00
|
|
|
if tL <= 0:
|
|
|
|
continue
|
|
|
|
left = True if tR > tZero else False
|
|
|
|
self.trimTime(tS, tL, left)
|
|
|
|
if 'waking' in self.dmesg[lp]:
|
|
|
|
tCnt = self.dmesg[lp]['waking'][0]
|
|
|
|
if self.dmesg[lp]['waking'][1] >= 0.001:
|
|
|
|
tTry = '-%.0f' % (round(self.dmesg[lp]['waking'][1] * 1000))
|
2020-07-21 01:02:49 +00:00
|
|
|
else:
|
2020-11-11 02:36:17 +00:00
|
|
|
tTry = '-%.3f' % (self.dmesg[lp]['waking'][1] * 1000)
|
|
|
|
text = '%.0f (%s ms waking %d times)' % (tL * 1000, tTry, tCnt)
|
|
|
|
else:
|
|
|
|
text = '%.0f' % (tL * 1000)
|
|
|
|
self.tLow.append(text)
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
lp = phase
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
def getMemTime(self):
|
|
|
|
if not self.hwstart or not self.hwend:
|
|
|
|
return
|
|
|
|
stime = (self.tSuspended - self.start) * 1000000
|
|
|
|
rtime = (self.end - self.tResumed) * 1000000
|
|
|
|
hws = self.hwstart + timedelta(microseconds=stime)
|
|
|
|
hwr = self.hwend - timedelta(microseconds=rtime)
|
|
|
|
self.tLow.append('%.0f'%((hwr - hws).total_seconds() * 1000))
|
2017-07-05 21:42:55 +00:00
|
|
|
def getTimeValues(self):
|
2018-10-08 22:56:32 +00:00
|
|
|
sktime = (self.tSuspended - self.tKernSus) * 1000
|
|
|
|
rktime = (self.tKernRes - self.tResumed) * 1000
|
2017-07-05 21:42:55 +00:00
|
|
|
return (sktime, rktime)
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
def setPhase(self, phase, ktime, isbegin, order=-1):
|
2014-08-08 16:11:59 +00:00
|
|
|
if(isbegin):
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
# phase start over current phase
|
|
|
|
if self.currphase:
|
|
|
|
if 'resume_machine' not in self.currphase:
|
|
|
|
sysvals.vprint('WARNING: phase %s failed to end' % self.currphase)
|
|
|
|
self.dmesg[self.currphase]['end'] = ktime
|
|
|
|
phases = self.dmesg.keys()
|
|
|
|
color = self.phasedef[phase]['color']
|
|
|
|
count = len(phases) if order < 0 else order
|
|
|
|
# create unique name for every new phase
|
|
|
|
while phase in phases:
|
|
|
|
phase += '*'
|
|
|
|
self.dmesg[phase] = {'list': dict(), 'start': -1.0, 'end': -1.0,
|
|
|
|
'row': 0, 'color': color, 'order': count}
|
2014-08-08 16:11:59 +00:00
|
|
|
self.dmesg[phase]['start'] = ktime
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
self.currphase = phase
|
2014-08-08 16:11:59 +00:00
|
|
|
else:
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
# phase end without a start
|
|
|
|
if phase not in self.currphase:
|
|
|
|
if self.currphase:
|
|
|
|
sysvals.vprint('WARNING: %s ended instead of %s, ftrace corruption?' % (phase, self.currphase))
|
|
|
|
else:
|
|
|
|
sysvals.vprint('WARNING: %s ended without a start, ftrace corruption?' % phase)
|
|
|
|
return phase
|
|
|
|
phase = self.currphase
|
2014-08-08 16:11:59 +00:00
|
|
|
self.dmesg[phase]['end'] = ktime
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
self.currphase = ''
|
|
|
|
return phase
|
2014-01-17 00:18:22 +00:00
|
|
|
def sortedDevices(self, phase):
|
|
|
|
list = self.dmesg[phase]['list']
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
return sorted(list, key=lambda k:list[k]['start'])
|
2016-12-14 18:37:07 +00:00
|
|
|
def fixupInitcalls(self, phase):
|
2014-01-17 00:18:22 +00:00
|
|
|
# if any calls never returned, clip them at system resume end
|
|
|
|
phaselist = self.dmesg[phase]['list']
|
|
|
|
for devname in phaselist:
|
|
|
|
dev = phaselist[devname]
|
|
|
|
if(dev['end'] < 0):
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
for p in self.sortedPhases():
|
2016-07-15 21:34:14 +00:00
|
|
|
if self.dmesg[p]['end'] > dev['start']:
|
|
|
|
dev['end'] = self.dmesg[p]['end']
|
|
|
|
break
|
2018-01-30 08:17:20 +00:00
|
|
|
sysvals.vprint('%s (%s): callback didnt return' % (devname, phase))
|
2014-08-08 16:11:59 +00:00
|
|
|
def deviceFilter(self, devicefilter):
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
for phase in self.sortedPhases():
|
2014-08-08 16:11:59 +00:00
|
|
|
list = self.dmesg[phase]['list']
|
|
|
|
rmlist = []
|
|
|
|
for name in list:
|
2016-12-14 18:37:06 +00:00
|
|
|
keep = False
|
|
|
|
for filter in devicefilter:
|
|
|
|
if filter in name or \
|
|
|
|
('drv' in list[name] and filter in list[name]['drv']):
|
|
|
|
keep = True
|
|
|
|
if not keep:
|
2014-08-08 16:11:59 +00:00
|
|
|
rmlist.append(name)
|
|
|
|
for name in rmlist:
|
|
|
|
del list[name]
|
2014-01-17 00:18:22 +00:00
|
|
|
def fixupInitcallsThatDidntReturn(self):
|
|
|
|
# if any calls never returned, clip them at system resume end
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
for phase in self.sortedPhases():
|
2016-12-14 18:37:07 +00:00
|
|
|
self.fixupInitcalls(phase)
|
2016-07-15 21:34:14 +00:00
|
|
|
def phaseOverlap(self, phases):
|
|
|
|
rmgroups = []
|
|
|
|
newgroup = []
|
|
|
|
for group in self.devicegroups:
|
|
|
|
for phase in phases:
|
|
|
|
if phase not in group:
|
|
|
|
continue
|
|
|
|
for p in group:
|
|
|
|
if p not in newgroup:
|
|
|
|
newgroup.append(p)
|
|
|
|
if group not in rmgroups:
|
|
|
|
rmgroups.append(group)
|
|
|
|
for group in rmgroups:
|
|
|
|
self.devicegroups.remove(group)
|
|
|
|
self.devicegroups.append(newgroup)
|
|
|
|
def newActionGlobal(self, name, start, end, pid=-1, color=''):
|
2016-12-14 18:37:05 +00:00
|
|
|
# which phase is this device callback or action in
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
phases = self.sortedPhases()
|
2016-12-14 18:37:05 +00:00
|
|
|
targetphase = 'none'
|
2016-07-15 21:34:14 +00:00
|
|
|
htmlclass = ''
|
2014-08-08 16:11:59 +00:00
|
|
|
overlap = 0.0
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
myphases = []
|
|
|
|
for phase in phases:
|
2014-08-08 16:11:59 +00:00
|
|
|
pstart = self.dmesg[phase]['start']
|
|
|
|
pend = self.dmesg[phase]['end']
|
2016-12-14 18:37:05 +00:00
|
|
|
# see if the action overlaps this phase
|
2014-08-08 16:11:59 +00:00
|
|
|
o = max(0, min(end, pend) - max(start, pstart))
|
2016-07-15 21:34:14 +00:00
|
|
|
if o > 0:
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
myphases.append(phase)
|
2016-12-14 18:37:05 +00:00
|
|
|
# set the target phase to the one that overlaps most
|
2016-07-15 21:34:14 +00:00
|
|
|
if o > overlap:
|
|
|
|
if overlap > 0 and phase == 'post_resume':
|
|
|
|
continue
|
2014-08-08 16:11:59 +00:00
|
|
|
targetphase = phase
|
|
|
|
overlap = o
|
2016-12-14 18:37:06 +00:00
|
|
|
# if no target phase was found, pin it to the edge
|
2016-12-14 18:37:05 +00:00
|
|
|
if targetphase == 'none':
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
p0start = self.dmesg[phases[0]]['start']
|
2016-12-14 18:37:06 +00:00
|
|
|
if start <= p0start:
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
targetphase = phases[0]
|
2016-12-14 18:37:06 +00:00
|
|
|
else:
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
targetphase = phases[-1]
|
2016-07-15 21:34:14 +00:00
|
|
|
if pid == -2:
|
|
|
|
htmlclass = ' bg'
|
2016-12-14 18:37:05 +00:00
|
|
|
elif pid == -3:
|
|
|
|
htmlclass = ' ps'
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
if len(myphases) > 1:
|
2016-07-15 21:34:14 +00:00
|
|
|
htmlclass = ' bg'
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
self.phaseOverlap(myphases)
|
|
|
|
if targetphase in phases:
|
2016-07-15 21:34:14 +00:00
|
|
|
newname = self.newAction(targetphase, name, pid, '', start, end, '', htmlclass, color)
|
|
|
|
return (targetphase, newname)
|
2014-08-08 16:11:59 +00:00
|
|
|
return False
|
2016-07-15 21:34:14 +00:00
|
|
|
def newAction(self, phase, name, pid, parent, start, end, drv, htmlclass='', color=''):
|
2014-08-08 16:11:59 +00:00
|
|
|
# new device callback for a specific phase
|
|
|
|
self.html_device_id += 1
|
|
|
|
devid = '%s%d' % (self.idstr, self.html_device_id)
|
2014-01-17 00:18:22 +00:00
|
|
|
list = self.dmesg[phase]['list']
|
|
|
|
length = -1.0
|
|
|
|
if(start >= 0 and end >= 0):
|
|
|
|
length = end - start
|
2020-07-21 01:02:49 +00:00
|
|
|
if pid == -2 or name not in sysvals.tracefuncs.keys():
|
2016-07-15 21:34:14 +00:00
|
|
|
i = 2
|
|
|
|
origname = name
|
|
|
|
while(name in list):
|
|
|
|
name = '%s[%d]' % (origname, i)
|
|
|
|
i += 1
|
2016-12-14 18:37:05 +00:00
|
|
|
list[name] = {'name': name, 'start': start, 'end': end, 'pid': pid,
|
|
|
|
'par': parent, 'length': length, 'row': 0, 'id': devid, 'drv': drv }
|
2016-07-15 21:34:14 +00:00
|
|
|
if htmlclass:
|
|
|
|
list[name]['htmlclass'] = htmlclass
|
|
|
|
if color:
|
|
|
|
list[name]['color'] = color
|
|
|
|
return name
|
2020-07-21 01:02:49 +00:00
|
|
|
def findDevice(self, phase, name):
|
|
|
|
list = self.dmesg[phase]['list']
|
|
|
|
mydev = ''
|
|
|
|
for devname in sorted(list):
|
|
|
|
if name == devname or re.match('^%s\[(?P<num>[0-9]*)\]$' % name, devname):
|
|
|
|
mydev = devname
|
|
|
|
if mydev:
|
|
|
|
return list[mydev]
|
|
|
|
return False
|
2014-08-08 16:11:59 +00:00
|
|
|
def deviceChildren(self, devname, phase):
|
2014-01-17 00:18:22 +00:00
|
|
|
devlist = []
|
2014-08-08 16:11:59 +00:00
|
|
|
list = self.dmesg[phase]['list']
|
|
|
|
for child in list:
|
|
|
|
if(list[child]['par'] == devname):
|
|
|
|
devlist.append(child)
|
|
|
|
return devlist
|
2018-10-08 22:56:32 +00:00
|
|
|
def maxDeviceNameSize(self, phase):
|
|
|
|
size = 0
|
|
|
|
for name in self.dmesg[phase]['list']:
|
|
|
|
if len(name) > size:
|
|
|
|
size = len(name)
|
|
|
|
return size
|
2014-08-08 16:11:59 +00:00
|
|
|
def printDetails(self):
|
2018-01-30 08:17:20 +00:00
|
|
|
sysvals.vprint('Timeline Details:')
|
|
|
|
sysvals.vprint(' test start: %f' % self.start)
|
|
|
|
sysvals.vprint('kernel suspend start: %f' % self.tKernSus)
|
2018-10-08 22:56:32 +00:00
|
|
|
tS = tR = False
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
for phase in self.sortedPhases():
|
2018-10-08 22:56:32 +00:00
|
|
|
devlist = self.dmesg[phase]['list']
|
|
|
|
dc, ps, pe = len(devlist), self.dmesg[phase]['start'], self.dmesg[phase]['end']
|
|
|
|
if not tS and ps >= self.tSuspended:
|
|
|
|
sysvals.vprint(' machine suspended: %f' % self.tSuspended)
|
|
|
|
tS = True
|
|
|
|
if not tR and ps >= self.tResumed:
|
|
|
|
sysvals.vprint(' machine resumed: %f' % self.tResumed)
|
|
|
|
tR = True
|
|
|
|
sysvals.vprint('%20s: %f - %f (%d devices)' % (phase, ps, pe, dc))
|
|
|
|
if sysvals.devdump:
|
|
|
|
sysvals.vprint(''.join('-' for i in range(80)))
|
|
|
|
maxname = '%d' % self.maxDeviceNameSize(phase)
|
|
|
|
fmt = '%3d) %'+maxname+'s - %f - %f'
|
|
|
|
c = 1
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
for name in sorted(devlist):
|
2018-10-08 22:56:32 +00:00
|
|
|
s = devlist[name]['start']
|
|
|
|
e = devlist[name]['end']
|
|
|
|
sysvals.vprint(fmt % (c, name, s, e))
|
|
|
|
c += 1
|
|
|
|
sysvals.vprint(''.join('-' for i in range(80)))
|
2018-01-30 08:17:20 +00:00
|
|
|
sysvals.vprint(' kernel resume end: %f' % self.tKernRes)
|
|
|
|
sysvals.vprint(' test end: %f' % self.end)
|
2016-07-15 21:34:14 +00:00
|
|
|
def deviceChildrenAllPhases(self, devname):
|
|
|
|
devlist = []
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
for phase in self.sortedPhases():
|
2016-07-15 21:34:14 +00:00
|
|
|
list = self.deviceChildren(devname, phase)
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
for dev in sorted(list):
|
2016-07-15 21:34:14 +00:00
|
|
|
if dev not in devlist:
|
|
|
|
devlist.append(dev)
|
|
|
|
return devlist
|
2014-08-08 16:11:59 +00:00
|
|
|
def masterTopology(self, name, list, depth):
|
|
|
|
node = DeviceNode(name, depth)
|
|
|
|
for cname in list:
|
2016-07-15 21:34:14 +00:00
|
|
|
# avoid recursions
|
|
|
|
if name == cname:
|
|
|
|
continue
|
|
|
|
clist = self.deviceChildrenAllPhases(cname)
|
2014-08-08 16:11:59 +00:00
|
|
|
cnode = self.masterTopology(cname, clist, depth+1)
|
|
|
|
node.children.append(cnode)
|
|
|
|
return node
|
|
|
|
def printTopology(self, node):
|
|
|
|
html = ''
|
|
|
|
if node.name:
|
|
|
|
info = ''
|
|
|
|
drv = ''
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
for phase in self.sortedPhases():
|
2014-08-08 16:11:59 +00:00
|
|
|
list = self.dmesg[phase]['list']
|
|
|
|
if node.name in list:
|
|
|
|
s = list[node.name]['start']
|
|
|
|
e = list[node.name]['end']
|
|
|
|
if list[node.name]['drv']:
|
|
|
|
drv = ' {'+list[node.name]['drv']+'}'
|
|
|
|
info += ('<li>%s: %.3fms</li>' % (phase, (e-s)*1000))
|
|
|
|
html += '<li><b>'+node.name+drv+'</b>'
|
|
|
|
if info:
|
|
|
|
html += '<ul>'+info+'</ul>'
|
|
|
|
html += '</li>'
|
|
|
|
if len(node.children) > 0:
|
|
|
|
html += '<ul>'
|
|
|
|
for cnode in node.children:
|
|
|
|
html += self.printTopology(cnode)
|
|
|
|
html += '</ul>'
|
|
|
|
return html
|
|
|
|
def rootDeviceList(self):
|
|
|
|
# list of devices graphed
|
|
|
|
real = []
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
for phase in self.sortedPhases():
|
2014-08-08 16:11:59 +00:00
|
|
|
list = self.dmesg[phase]['list']
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
for dev in sorted(list):
|
2014-08-08 16:11:59 +00:00
|
|
|
if list[dev]['pid'] >= 0 and dev not in real:
|
|
|
|
real.append(dev)
|
|
|
|
# list of top-most root devices
|
|
|
|
rootlist = []
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
for phase in self.sortedPhases():
|
2014-08-08 16:11:59 +00:00
|
|
|
list = self.dmesg[phase]['list']
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
for dev in sorted(list):
|
2014-08-08 16:11:59 +00:00
|
|
|
pdev = list[dev]['par']
|
2016-07-15 21:34:14 +00:00
|
|
|
pid = list[dev]['pid']
|
|
|
|
if(pid < 0 or re.match('[0-9]*-[0-9]*\.[0-9]*[\.0-9]*\:[\.0-9]*$', pdev)):
|
2014-08-08 16:11:59 +00:00
|
|
|
continue
|
|
|
|
if pdev and pdev not in real and pdev not in rootlist:
|
|
|
|
rootlist.append(pdev)
|
|
|
|
return rootlist
|
|
|
|
def deviceTopology(self):
|
|
|
|
rootlist = self.rootDeviceList()
|
|
|
|
master = self.masterTopology('', rootlist, 0)
|
|
|
|
return self.printTopology(master)
|
2016-07-15 21:34:14 +00:00
|
|
|
def selectTimelineDevices(self, widfmt, tTotal, mindevlen):
|
|
|
|
# only select devices that will actually show up in html
|
|
|
|
self.tdevlist = dict()
|
|
|
|
for phase in self.dmesg:
|
|
|
|
devlist = []
|
|
|
|
list = self.dmesg[phase]['list']
|
|
|
|
for dev in list:
|
|
|
|
length = (list[dev]['end'] - list[dev]['start']) * 1000
|
|
|
|
width = widfmt % (((list[dev]['end']-list[dev]['start'])*100)/tTotal)
|
2020-11-11 02:36:17 +00:00
|
|
|
if length >= mindevlen:
|
2016-07-15 21:34:14 +00:00
|
|
|
devlist.append(dev)
|
|
|
|
self.tdevlist[phase] = devlist
|
2016-12-14 18:37:06 +00:00
|
|
|
def addHorizontalDivider(self, devname, devend):
|
|
|
|
phase = 'suspend_prepare'
|
|
|
|
self.newAction(phase, devname, -2, '', \
|
|
|
|
self.start, devend, '', ' sec', '')
|
|
|
|
if phase not in self.tdevlist:
|
|
|
|
self.tdevlist[phase] = []
|
|
|
|
self.tdevlist[phase].append(devname)
|
|
|
|
d = DevItem(0, phase, self.dmesg[phase]['list'][devname])
|
|
|
|
return d
|
2016-12-14 18:37:05 +00:00
|
|
|
def addProcessUsageEvent(self, name, times):
|
|
|
|
# get the start and end times for this process
|
|
|
|
maxC = 0
|
|
|
|
tlast = 0
|
|
|
|
start = -1
|
|
|
|
end = -1
|
|
|
|
for t in sorted(times):
|
|
|
|
if tlast == 0:
|
|
|
|
tlast = t
|
|
|
|
continue
|
|
|
|
if name in self.pstl[t]:
|
|
|
|
if start == -1 or tlast < start:
|
|
|
|
start = tlast
|
|
|
|
if end == -1 or t > end:
|
|
|
|
end = t
|
|
|
|
tlast = t
|
|
|
|
if start == -1 or end == -1:
|
|
|
|
return 0
|
|
|
|
# add a new action for this process and get the object
|
|
|
|
out = self.newActionGlobal(name, start, end, -3)
|
|
|
|
if not out:
|
|
|
|
return 0
|
|
|
|
phase, devname = out
|
|
|
|
dev = self.dmesg[phase]['list'][devname]
|
|
|
|
# get the cpu exec data
|
|
|
|
tlast = 0
|
|
|
|
clast = 0
|
|
|
|
cpuexec = dict()
|
|
|
|
for t in sorted(times):
|
|
|
|
if tlast == 0 or t <= start or t > end:
|
|
|
|
tlast = t
|
|
|
|
continue
|
|
|
|
list = self.pstl[t]
|
|
|
|
c = 0
|
|
|
|
if name in list:
|
|
|
|
c = list[name]
|
|
|
|
if c > maxC:
|
|
|
|
maxC = c
|
|
|
|
if c != clast:
|
|
|
|
key = (tlast, t)
|
|
|
|
cpuexec[key] = c
|
|
|
|
tlast = t
|
|
|
|
clast = c
|
|
|
|
dev['cpuexec'] = cpuexec
|
|
|
|
return maxC
|
|
|
|
def createProcessUsageEvents(self):
|
|
|
|
# get an array of process names
|
|
|
|
proclist = []
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
for t in sorted(self.pstl):
|
2016-12-14 18:37:05 +00:00
|
|
|
pslist = self.pstl[t]
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
for ps in sorted(pslist):
|
2016-12-14 18:37:05 +00:00
|
|
|
if ps not in proclist:
|
|
|
|
proclist.append(ps)
|
|
|
|
# get a list of data points for suspend and resume
|
|
|
|
tsus = []
|
|
|
|
tres = []
|
|
|
|
for t in sorted(self.pstl):
|
|
|
|
if t < self.tSuspended:
|
|
|
|
tsus.append(t)
|
|
|
|
else:
|
|
|
|
tres.append(t)
|
|
|
|
# process the events for suspend and resume
|
|
|
|
if len(proclist) > 0:
|
2018-01-30 08:17:20 +00:00
|
|
|
sysvals.vprint('Process Execution:')
|
2016-12-14 18:37:05 +00:00
|
|
|
for ps in proclist:
|
|
|
|
c = self.addProcessUsageEvent(ps, tsus)
|
|
|
|
if c > 0:
|
2018-01-30 08:17:20 +00:00
|
|
|
sysvals.vprint('%25s (sus): %d' % (ps, c))
|
2016-12-14 18:37:05 +00:00
|
|
|
c = self.addProcessUsageEvent(ps, tres)
|
|
|
|
if c > 0:
|
2018-01-30 08:17:20 +00:00
|
|
|
sysvals.vprint('%25s (res): %d' % (ps, c))
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
def handleEndMarker(self, time, msg=''):
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
dm = self.dmesg
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
self.setEnd(time, msg)
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
self.initDevicegroups()
|
|
|
|
# give suspend_prepare an end if needed
|
|
|
|
if 'suspend_prepare' in dm and dm['suspend_prepare']['end'] < 0:
|
|
|
|
dm['suspend_prepare']['end'] = time
|
|
|
|
# assume resume machine ends at next phase start
|
|
|
|
if 'resume_machine' in dm and dm['resume_machine']['end'] < 0:
|
|
|
|
np = self.nextPhase('resume_machine', 1)
|
|
|
|
if np:
|
|
|
|
dm['resume_machine']['end'] = dm[np]['start']
|
|
|
|
# if kernel resume end not found, assume its the end marker
|
|
|
|
if self.tKernRes == 0.0:
|
|
|
|
self.tKernRes = time
|
|
|
|
# if kernel suspend start not found, assume its the end marker
|
|
|
|
if self.tKernSus == 0.0:
|
|
|
|
self.tKernSus = time
|
|
|
|
# set resume complete to end at end marker
|
|
|
|
if 'resume_complete' in dm:
|
|
|
|
dm['resume_complete']['end'] = time
|
2018-01-30 08:17:20 +00:00
|
|
|
def debugPrint(self):
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
for p in self.sortedPhases():
|
2018-01-30 08:17:20 +00:00
|
|
|
list = self.dmesg[p]['list']
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
for devname in sorted(list):
|
2018-01-30 08:17:20 +00:00
|
|
|
dev = list[devname]
|
|
|
|
if 'ftrace' in dev:
|
|
|
|
dev['ftrace'].debugPrint(' [%s]' % devname)
|
2016-12-14 18:37:05 +00:00
|
|
|
|
|
|
|
# Class: DevFunction
|
2014-08-08 16:11:59 +00:00
|
|
|
# Description:
|
2016-12-14 18:37:05 +00:00
|
|
|
# A container for kprobe function data we want in the dev timeline
|
|
|
|
class DevFunction:
|
2016-12-14 18:37:06 +00:00
|
|
|
def __init__(self, name, args, caller, ret, start, end, u, proc, pid, color):
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
self.row = 0
|
|
|
|
self.count = 1
|
2016-12-14 18:37:05 +00:00
|
|
|
self.name = name
|
|
|
|
self.args = args
|
|
|
|
self.caller = caller
|
|
|
|
self.ret = ret
|
|
|
|
self.time = start
|
|
|
|
self.length = end - start
|
|
|
|
self.end = end
|
|
|
|
self.ubiquitous = u
|
|
|
|
self.proc = proc
|
|
|
|
self.pid = pid
|
2016-12-14 18:37:06 +00:00
|
|
|
self.color = color
|
2016-12-14 18:37:05 +00:00
|
|
|
def title(self):
|
|
|
|
cnt = ''
|
|
|
|
if self.count > 1:
|
|
|
|
cnt = '(x%d)' % self.count
|
|
|
|
l = '%0.3fms' % (self.length * 1000)
|
|
|
|
if self.ubiquitous:
|
2016-12-14 18:37:06 +00:00
|
|
|
title = '%s(%s)%s <- %s, %s(%s)' % \
|
|
|
|
(self.name, self.args, cnt, self.caller, self.ret, l)
|
2016-12-14 18:37:05 +00:00
|
|
|
else:
|
|
|
|
title = '%s(%s) %s%s(%s)' % (self.name, self.args, self.ret, cnt, l)
|
2016-12-14 18:37:06 +00:00
|
|
|
return title.replace('"', '')
|
2016-12-14 18:37:05 +00:00
|
|
|
def text(self):
|
|
|
|
if self.count > 1:
|
|
|
|
text = '%s(x%d)' % (self.name, self.count)
|
|
|
|
else:
|
|
|
|
text = self.name
|
|
|
|
return text
|
|
|
|
def repeat(self, tgt):
|
2016-12-14 18:37:06 +00:00
|
|
|
# is the tgt call just a repeat of this call (e.g. are we in a loop)
|
2016-12-14 18:37:05 +00:00
|
|
|
dt = self.time - tgt.end
|
2016-12-14 18:37:06 +00:00
|
|
|
# only combine calls if -all- attributes are identical
|
2016-12-14 18:37:05 +00:00
|
|
|
if tgt.caller == self.caller and \
|
|
|
|
tgt.name == self.name and tgt.args == self.args and \
|
|
|
|
tgt.proc == self.proc and tgt.pid == self.pid and \
|
2016-12-14 18:37:06 +00:00
|
|
|
tgt.ret == self.ret and dt >= 0 and \
|
|
|
|
dt <= sysvals.callloopmaxgap and \
|
|
|
|
self.length < sysvals.callloopmaxlen:
|
2016-12-14 18:37:05 +00:00
|
|
|
return True
|
|
|
|
return False
|
2014-08-08 16:11:59 +00:00
|
|
|
|
|
|
|
# Class: FTraceLine
|
|
|
|
# Description:
|
|
|
|
# A container for a single line of ftrace data. There are six basic types:
|
|
|
|
# callgraph line:
|
|
|
|
# call: " dpm_run_callback() {"
|
|
|
|
# return: " }"
|
|
|
|
# leaf: " dpm_run_callback();"
|
|
|
|
# trace event:
|
|
|
|
# tracing_mark_write: SUSPEND START or RESUME COMPLETE
|
|
|
|
# suspend_resume: phase or custom exec block data
|
|
|
|
# device_pm_callback: device callback info
|
2014-01-17 00:18:22 +00:00
|
|
|
class FTraceLine:
|
2016-07-15 21:34:14 +00:00
|
|
|
def __init__(self, t, m='', d=''):
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
self.length = 0.0
|
|
|
|
self.fcall = False
|
|
|
|
self.freturn = False
|
|
|
|
self.fevent = False
|
|
|
|
self.fkprobe = False
|
|
|
|
self.depth = 0
|
|
|
|
self.name = ''
|
|
|
|
self.type = ''
|
2014-01-17 00:18:22 +00:00
|
|
|
self.time = float(t)
|
2016-07-15 21:34:14 +00:00
|
|
|
if not m and not d:
|
|
|
|
return
|
2014-08-08 16:11:59 +00:00
|
|
|
# is this a trace event
|
|
|
|
if(d == 'traceevent' or re.match('^ *\/\* *(?P<msg>.*) \*\/ *$', m)):
|
|
|
|
if(d == 'traceevent'):
|
|
|
|
# nop format trace event
|
|
|
|
msg = m
|
|
|
|
else:
|
|
|
|
# function_graph format trace event
|
|
|
|
em = re.match('^ *\/\* *(?P<msg>.*) \*\/ *$', m)
|
|
|
|
msg = em.group('msg')
|
|
|
|
|
|
|
|
emm = re.match('^(?P<call>.*?): (?P<msg>.*)', msg)
|
|
|
|
if(emm):
|
|
|
|
self.name = emm.group('msg')
|
|
|
|
self.type = emm.group('call')
|
|
|
|
else:
|
|
|
|
self.name = msg
|
2016-07-15 21:34:14 +00:00
|
|
|
km = re.match('^(?P<n>.*)_cal$', self.type)
|
|
|
|
if km:
|
|
|
|
self.fcall = True
|
|
|
|
self.fkprobe = True
|
|
|
|
self.type = km.group('n')
|
|
|
|
return
|
|
|
|
km = re.match('^(?P<n>.*)_ret$', self.type)
|
|
|
|
if km:
|
|
|
|
self.freturn = True
|
|
|
|
self.fkprobe = True
|
|
|
|
self.type = km.group('n')
|
|
|
|
return
|
2014-01-17 00:18:22 +00:00
|
|
|
self.fevent = True
|
|
|
|
return
|
|
|
|
# convert the duration to seconds
|
|
|
|
if(d):
|
|
|
|
self.length = float(d)/1000000
|
|
|
|
# the indentation determines the depth
|
2014-08-08 16:11:59 +00:00
|
|
|
match = re.match('^(?P<d> *)(?P<o>.*)$', m)
|
2014-01-17 00:18:22 +00:00
|
|
|
if(not match):
|
|
|
|
return
|
|
|
|
self.depth = self.getDepth(match.group('d'))
|
|
|
|
m = match.group('o')
|
|
|
|
# function return
|
|
|
|
if(m[0] == '}'):
|
|
|
|
self.freturn = True
|
|
|
|
if(len(m) > 1):
|
|
|
|
# includes comment with function name
|
2014-08-08 16:11:59 +00:00
|
|
|
match = re.match('^} *\/\* *(?P<n>.*) *\*\/$', m)
|
2014-01-17 00:18:22 +00:00
|
|
|
if(match):
|
2016-07-15 21:34:14 +00:00
|
|
|
self.name = match.group('n').strip()
|
2014-01-17 00:18:22 +00:00
|
|
|
# function call
|
|
|
|
else:
|
|
|
|
self.fcall = True
|
|
|
|
# function call with children
|
|
|
|
if(m[-1] == '{'):
|
2014-08-08 16:11:59 +00:00
|
|
|
match = re.match('^(?P<n>.*) *\(.*', m)
|
2014-01-17 00:18:22 +00:00
|
|
|
if(match):
|
2016-07-15 21:34:14 +00:00
|
|
|
self.name = match.group('n').strip()
|
2014-01-17 00:18:22 +00:00
|
|
|
# function call with no children (leaf)
|
|
|
|
elif(m[-1] == ';'):
|
|
|
|
self.freturn = True
|
2014-08-08 16:11:59 +00:00
|
|
|
match = re.match('^(?P<n>.*) *\(.*', m)
|
2014-01-17 00:18:22 +00:00
|
|
|
if(match):
|
2016-07-15 21:34:14 +00:00
|
|
|
self.name = match.group('n').strip()
|
2014-01-17 00:18:22 +00:00
|
|
|
# something else (possibly a trace marker)
|
|
|
|
else:
|
|
|
|
self.name = m
|
2018-01-30 08:17:20 +00:00
|
|
|
def isCall(self):
|
|
|
|
return self.fcall and not self.freturn
|
|
|
|
def isReturn(self):
|
|
|
|
return self.freturn and not self.fcall
|
|
|
|
def isLeaf(self):
|
|
|
|
return self.fcall and self.freturn
|
2014-01-17 00:18:22 +00:00
|
|
|
def getDepth(self, str):
|
|
|
|
return len(str)/2
|
2018-01-30 08:17:20 +00:00
|
|
|
def debugPrint(self, info=''):
|
|
|
|
if self.isLeaf():
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint(' -- %12.6f (depth=%02d): %s(); (%.3f us) %s' % (self.time, \
|
2018-01-30 08:17:20 +00:00
|
|
|
self.depth, self.name, self.length*1000000, info))
|
|
|
|
elif self.freturn:
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint(' -- %12.6f (depth=%02d): %s} (%.3f us) %s' % (self.time, \
|
2018-01-30 08:17:20 +00:00
|
|
|
self.depth, self.name, self.length*1000000, info))
|
2014-08-08 16:11:59 +00:00
|
|
|
else:
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint(' -- %12.6f (depth=%02d): %s() { (%.3f us) %s' % (self.time, \
|
2018-01-30 08:17:20 +00:00
|
|
|
self.depth, self.name, self.length*1000000, info))
|
2016-07-15 21:34:14 +00:00
|
|
|
def startMarker(self):
|
|
|
|
# Is this the starting line of a suspend?
|
|
|
|
if not self.fevent:
|
|
|
|
return False
|
|
|
|
if sysvals.usetracemarkers:
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
if(self.name.startswith('SUSPEND START')):
|
2016-07-15 21:34:14 +00:00
|
|
|
return True
|
|
|
|
return False
|
|
|
|
else:
|
|
|
|
if(self.type == 'suspend_resume' and
|
|
|
|
re.match('suspend_enter\[.*\] begin', self.name)):
|
|
|
|
return True
|
|
|
|
return False
|
|
|
|
def endMarker(self):
|
|
|
|
# Is this the ending line of a resume?
|
|
|
|
if not self.fevent:
|
|
|
|
return False
|
|
|
|
if sysvals.usetracemarkers:
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
if(self.name.startswith('RESUME COMPLETE')):
|
2016-07-15 21:34:14 +00:00
|
|
|
return True
|
|
|
|
return False
|
|
|
|
else:
|
|
|
|
if(self.type == 'suspend_resume' and
|
|
|
|
re.match('thaw_processes\[.*\] end', self.name)):
|
|
|
|
return True
|
|
|
|
return False
|
2014-01-17 00:18:22 +00:00
|
|
|
|
2014-08-08 16:11:59 +00:00
|
|
|
# Class: FTraceCallGraph
|
|
|
|
# Description:
|
|
|
|
# A container for the ftrace callgraph of a single recursive function.
|
|
|
|
# This can be a dpm_run_callback, dpm_prepare, or dpm_complete callgraph
|
|
|
|
# Each instance is tied to a single device in a single phase, and is
|
|
|
|
# comprised of an ordered list of FTraceLine objects
|
2014-01-17 00:18:22 +00:00
|
|
|
class FTraceCallGraph:
|
2018-01-30 08:17:20 +00:00
|
|
|
vfname = 'missing_function_name'
|
|
|
|
def __init__(self, pid, sv):
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
self.id = ''
|
|
|
|
self.invalid = False
|
|
|
|
self.name = ''
|
|
|
|
self.partial = False
|
|
|
|
self.ignore = False
|
2014-01-17 00:18:22 +00:00
|
|
|
self.start = -1.0
|
|
|
|
self.end = -1.0
|
|
|
|
self.list = []
|
|
|
|
self.depth = 0
|
2016-07-15 21:34:14 +00:00
|
|
|
self.pid = pid
|
2018-01-30 08:17:20 +00:00
|
|
|
self.sv = sv
|
|
|
|
def addLine(self, line):
|
2016-07-15 21:34:14 +00:00
|
|
|
# if this is already invalid, just leave
|
|
|
|
if(self.invalid):
|
2018-01-30 08:17:20 +00:00
|
|
|
if(line.depth == 0 and line.freturn):
|
|
|
|
return 1
|
|
|
|
return 0
|
|
|
|
# invalidate on bad depth
|
|
|
|
if(self.depth < 0):
|
2016-07-15 21:34:14 +00:00
|
|
|
self.invalidate(line)
|
2018-01-30 08:17:20 +00:00
|
|
|
return 0
|
|
|
|
# ignore data til we return to the current depth
|
|
|
|
if self.ignore:
|
|
|
|
if line.depth > self.depth:
|
|
|
|
return 0
|
|
|
|
else:
|
|
|
|
self.list[-1].freturn = True
|
|
|
|
self.list[-1].length = line.time - self.list[-1].time
|
|
|
|
self.ignore = False
|
|
|
|
# if this is a return at self.depth, no more work is needed
|
|
|
|
if line.depth == self.depth and line.isReturn():
|
|
|
|
if line.depth == 0:
|
|
|
|
self.end = line.time
|
|
|
|
return 1
|
|
|
|
return 0
|
2016-07-15 21:34:14 +00:00
|
|
|
# compare current depth with this lines pre-call depth
|
|
|
|
prelinedep = line.depth
|
2018-01-30 08:17:20 +00:00
|
|
|
if line.isReturn():
|
2016-07-15 21:34:14 +00:00
|
|
|
prelinedep += 1
|
|
|
|
last = 0
|
|
|
|
lasttime = line.time
|
|
|
|
if len(self.list) > 0:
|
|
|
|
last = self.list[-1]
|
|
|
|
lasttime = last.time
|
2018-01-30 08:17:20 +00:00
|
|
|
if last.isLeaf():
|
|
|
|
lasttime += last.length
|
2016-07-15 21:34:14 +00:00
|
|
|
# handle low misalignments by inserting returns
|
2018-01-30 08:17:20 +00:00
|
|
|
mismatch = prelinedep - self.depth
|
|
|
|
warning = self.sv.verbose and abs(mismatch) > 1
|
|
|
|
info = []
|
|
|
|
if mismatch < 0:
|
2016-07-15 21:34:14 +00:00
|
|
|
idx = 0
|
|
|
|
# add return calls to get the depth down
|
|
|
|
while prelinedep < self.depth:
|
|
|
|
self.depth -= 1
|
2018-01-30 08:17:20 +00:00
|
|
|
if idx == 0 and last and last.isCall():
|
2016-07-15 21:34:14 +00:00
|
|
|
# special case, turn last call into a leaf
|
|
|
|
last.depth = self.depth
|
|
|
|
last.freturn = True
|
|
|
|
last.length = line.time - last.time
|
2018-01-30 08:17:20 +00:00
|
|
|
if warning:
|
|
|
|
info.append(('[make leaf]', last))
|
2016-07-15 21:34:14 +00:00
|
|
|
else:
|
|
|
|
vline = FTraceLine(lasttime)
|
|
|
|
vline.depth = self.depth
|
2018-01-30 08:17:20 +00:00
|
|
|
vline.name = self.vfname
|
2016-07-15 21:34:14 +00:00
|
|
|
vline.freturn = True
|
|
|
|
self.list.append(vline)
|
2018-01-30 08:17:20 +00:00
|
|
|
if warning:
|
|
|
|
if idx == 0:
|
|
|
|
info.append(('', last))
|
|
|
|
info.append(('[add return]', vline))
|
2016-07-15 21:34:14 +00:00
|
|
|
idx += 1
|
2018-01-30 08:17:20 +00:00
|
|
|
if warning:
|
|
|
|
info.append(('', line))
|
2016-07-15 21:34:14 +00:00
|
|
|
# handle high misalignments by inserting calls
|
2018-01-30 08:17:20 +00:00
|
|
|
elif mismatch > 0:
|
2016-07-15 21:34:14 +00:00
|
|
|
idx = 0
|
2018-01-30 08:17:20 +00:00
|
|
|
if warning:
|
|
|
|
info.append(('', last))
|
2016-07-15 21:34:14 +00:00
|
|
|
# add calls to get the depth up
|
|
|
|
while prelinedep > self.depth:
|
2018-01-30 08:17:20 +00:00
|
|
|
if idx == 0 and line.isReturn():
|
2016-07-15 21:34:14 +00:00
|
|
|
# special case, turn this return into a leaf
|
|
|
|
line.fcall = True
|
|
|
|
prelinedep -= 1
|
2018-01-30 08:17:20 +00:00
|
|
|
if warning:
|
|
|
|
info.append(('[make leaf]', line))
|
2016-07-15 21:34:14 +00:00
|
|
|
else:
|
|
|
|
vline = FTraceLine(lasttime)
|
|
|
|
vline.depth = self.depth
|
2018-01-30 08:17:20 +00:00
|
|
|
vline.name = self.vfname
|
2016-07-15 21:34:14 +00:00
|
|
|
vline.fcall = True
|
|
|
|
self.list.append(vline)
|
|
|
|
self.depth += 1
|
|
|
|
if not last:
|
|
|
|
self.start = vline.time
|
2018-01-30 08:17:20 +00:00
|
|
|
if warning:
|
|
|
|
info.append(('[add call]', vline))
|
2016-07-15 21:34:14 +00:00
|
|
|
idx += 1
|
2018-01-30 08:17:20 +00:00
|
|
|
if warning and ('[make leaf]', line) not in info:
|
|
|
|
info.append(('', line))
|
|
|
|
if warning:
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint('WARNING: ftrace data missing, corrections made:')
|
2018-01-30 08:17:20 +00:00
|
|
|
for i in info:
|
|
|
|
t, obj = i
|
|
|
|
if obj:
|
|
|
|
obj.debugPrint(t)
|
2016-07-15 21:34:14 +00:00
|
|
|
# process the call and set the new depth
|
2018-01-30 08:17:20 +00:00
|
|
|
skipadd = False
|
|
|
|
md = self.sv.max_graph_depth
|
|
|
|
if line.isCall():
|
|
|
|
# ignore blacklisted/overdepth funcs
|
|
|
|
if (md and self.depth >= md - 1) or (line.name in self.sv.cgblacklist):
|
|
|
|
self.ignore = True
|
|
|
|
else:
|
|
|
|
self.depth += 1
|
|
|
|
elif line.isReturn():
|
2014-01-17 00:18:22 +00:00
|
|
|
self.depth -= 1
|
2018-01-30 08:17:20 +00:00
|
|
|
# remove blacklisted/overdepth/empty funcs that slipped through
|
|
|
|
if (last and last.isCall() and last.depth == line.depth) or \
|
|
|
|
(md and last and last.depth >= md) or \
|
|
|
|
(line.name in self.sv.cgblacklist):
|
|
|
|
while len(self.list) > 0 and self.list[-1].depth > line.depth:
|
|
|
|
self.list.pop(-1)
|
|
|
|
if len(self.list) == 0:
|
|
|
|
self.invalid = True
|
|
|
|
return 1
|
|
|
|
self.list[-1].freturn = True
|
|
|
|
self.list[-1].length = line.time - self.list[-1].time
|
|
|
|
self.list[-1].name = line.name
|
|
|
|
skipadd = True
|
2016-07-15 21:34:14 +00:00
|
|
|
if len(self.list) < 1:
|
|
|
|
self.start = line.time
|
2018-01-30 08:17:20 +00:00
|
|
|
# check for a mismatch that returned all the way to callgraph end
|
|
|
|
res = 1
|
|
|
|
if mismatch < 0 and self.list[-1].depth == 0 and self.list[-1].freturn:
|
|
|
|
line = self.list[-1]
|
|
|
|
skipadd = True
|
|
|
|
res = -1
|
|
|
|
if not skipadd:
|
|
|
|
self.list.append(line)
|
2014-01-17 00:18:22 +00:00
|
|
|
if(line.depth == 0 and line.freturn):
|
2014-08-08 16:11:59 +00:00
|
|
|
if(self.start < 0):
|
|
|
|
self.start = line.time
|
2014-01-17 00:18:22 +00:00
|
|
|
self.end = line.time
|
2016-07-15 21:34:14 +00:00
|
|
|
if line.fcall:
|
|
|
|
self.end += line.length
|
2018-01-30 08:17:20 +00:00
|
|
|
if self.list[0].name == self.vfname:
|
2016-07-15 21:34:14 +00:00
|
|
|
self.invalid = True
|
2018-01-30 08:17:20 +00:00
|
|
|
if res == -1:
|
|
|
|
self.partial = True
|
|
|
|
return res
|
|
|
|
return 0
|
2016-07-15 21:34:14 +00:00
|
|
|
def invalidate(self, line):
|
|
|
|
if(len(self.list) > 0):
|
|
|
|
first = self.list[0]
|
|
|
|
self.list = []
|
|
|
|
self.list.append(first)
|
|
|
|
self.invalid = True
|
|
|
|
id = 'task %s' % (self.pid)
|
|
|
|
window = '(%f - %f)' % (self.start, line.time)
|
|
|
|
if(self.depth < 0):
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint('Data misalignment for '+id+\
|
2016-07-15 21:34:14 +00:00
|
|
|
' (buffer overflow), ignoring this callback')
|
|
|
|
else:
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint('Too much data for '+id+\
|
2016-07-15 21:34:14 +00:00
|
|
|
' '+window+', ignoring this callback')
|
2018-01-30 08:17:20 +00:00
|
|
|
def slice(self, dev):
|
|
|
|
minicg = FTraceCallGraph(dev['pid'], self.sv)
|
|
|
|
minicg.name = self.name
|
|
|
|
mydepth = -1
|
|
|
|
good = False
|
2014-08-08 16:11:59 +00:00
|
|
|
for l in self.list:
|
2018-01-30 08:17:20 +00:00
|
|
|
if(l.time < dev['start'] or l.time > dev['end']):
|
2014-08-08 16:11:59 +00:00
|
|
|
continue
|
2018-01-30 08:17:20 +00:00
|
|
|
if mydepth < 0:
|
|
|
|
if l.name == 'mutex_lock' and l.freturn:
|
|
|
|
mydepth = l.depth
|
|
|
|
continue
|
|
|
|
elif l.depth == mydepth and l.name == 'mutex_unlock' and l.fcall:
|
|
|
|
good = True
|
2014-08-08 16:11:59 +00:00
|
|
|
break
|
2018-01-30 08:17:20 +00:00
|
|
|
l.depth -= mydepth
|
|
|
|
minicg.addLine(l)
|
|
|
|
if not good or len(minicg.list) < 1:
|
|
|
|
return 0
|
2014-08-08 16:11:59 +00:00
|
|
|
return minicg
|
2016-07-15 21:34:14 +00:00
|
|
|
def repair(self, enddepth):
|
|
|
|
# bring the depth back to 0 with additional returns
|
|
|
|
fixed = False
|
|
|
|
last = self.list[-1]
|
|
|
|
for i in reversed(range(enddepth)):
|
|
|
|
t = FTraceLine(last.time)
|
|
|
|
t.depth = i
|
|
|
|
t.freturn = True
|
|
|
|
fixed = self.addLine(t)
|
2018-01-30 08:17:20 +00:00
|
|
|
if fixed != 0:
|
2016-07-15 21:34:14 +00:00
|
|
|
self.end = last.time
|
|
|
|
return True
|
|
|
|
return False
|
2018-01-30 08:17:20 +00:00
|
|
|
def postProcess(self):
|
2017-04-07 18:05:35 +00:00
|
|
|
if len(self.list) > 0:
|
|
|
|
self.name = self.list[0].name
|
2014-01-17 00:18:22 +00:00
|
|
|
stack = dict()
|
|
|
|
cnt = 0
|
2017-04-07 18:05:35 +00:00
|
|
|
last = 0
|
2014-01-17 00:18:22 +00:00
|
|
|
for l in self.list:
|
2017-04-07 18:05:35 +00:00
|
|
|
# ftrace bug: reported duration is not reliable
|
|
|
|
# check each leaf and clip it at max possible length
|
2018-01-30 08:17:20 +00:00
|
|
|
if last and last.isLeaf():
|
2017-04-07 18:05:35 +00:00
|
|
|
if last.length > l.time - last.time:
|
|
|
|
last.length = l.time - last.time
|
2018-01-30 08:17:20 +00:00
|
|
|
if l.isCall():
|
2014-01-17 00:18:22 +00:00
|
|
|
stack[l.depth] = l
|
|
|
|
cnt += 1
|
2018-01-30 08:17:20 +00:00
|
|
|
elif l.isReturn():
|
2014-08-08 16:11:59 +00:00
|
|
|
if(l.depth not in stack):
|
2018-01-30 08:17:20 +00:00
|
|
|
if self.sv.verbose:
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint('Post Process Error: Depth missing')
|
2016-07-15 21:34:14 +00:00
|
|
|
l.debugPrint()
|
2014-01-17 00:18:22 +00:00
|
|
|
return False
|
2017-04-07 18:05:35 +00:00
|
|
|
# calculate call length from call/return lines
|
2018-01-30 08:17:20 +00:00
|
|
|
cl = stack[l.depth]
|
|
|
|
cl.length = l.time - cl.time
|
|
|
|
if cl.name == self.vfname:
|
|
|
|
cl.name = l.name
|
2016-07-15 21:34:14 +00:00
|
|
|
stack.pop(l.depth)
|
2014-01-17 00:18:22 +00:00
|
|
|
l.length = 0
|
|
|
|
cnt -= 1
|
2017-04-07 18:05:35 +00:00
|
|
|
last = l
|
2014-01-17 00:18:22 +00:00
|
|
|
if(cnt == 0):
|
2016-07-15 21:34:14 +00:00
|
|
|
# trace caught the whole call tree
|
2014-01-17 00:18:22 +00:00
|
|
|
return True
|
2016-07-15 21:34:14 +00:00
|
|
|
elif(cnt < 0):
|
2018-01-30 08:17:20 +00:00
|
|
|
if self.sv.verbose:
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint('Post Process Error: Depth is less than 0')
|
2016-07-15 21:34:14 +00:00
|
|
|
return False
|
|
|
|
# trace ended before call tree finished
|
|
|
|
return self.repair(cnt)
|
|
|
|
def deviceMatch(self, pid, data):
|
2018-01-30 08:17:20 +00:00
|
|
|
found = ''
|
2016-07-15 21:34:14 +00:00
|
|
|
# add the callgraph data to the device hierarchy
|
|
|
|
borderphase = {
|
|
|
|
'dpm_prepare': 'suspend_prepare',
|
|
|
|
'dpm_complete': 'resume_complete'
|
|
|
|
}
|
2017-04-07 18:05:35 +00:00
|
|
|
if(self.name in borderphase):
|
|
|
|
p = borderphase[self.name]
|
2016-07-15 21:34:14 +00:00
|
|
|
list = data.dmesg[p]['list']
|
|
|
|
for devname in list:
|
|
|
|
dev = list[devname]
|
|
|
|
if(pid == dev['pid'] and
|
|
|
|
self.start <= dev['start'] and
|
|
|
|
self.end >= dev['end']):
|
2018-01-30 08:17:20 +00:00
|
|
|
cg = self.slice(dev)
|
|
|
|
if cg:
|
|
|
|
dev['ftrace'] = cg
|
|
|
|
found = devname
|
2016-07-15 21:34:14 +00:00
|
|
|
return found
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
for p in data.sortedPhases():
|
2016-07-15 21:34:14 +00:00
|
|
|
if(data.dmesg[p]['start'] <= self.start and
|
|
|
|
self.start <= data.dmesg[p]['end']):
|
|
|
|
list = data.dmesg[p]['list']
|
2019-05-14 17:53:58 +00:00
|
|
|
for devname in sorted(list, key=lambda k:list[k]['start']):
|
2016-07-15 21:34:14 +00:00
|
|
|
dev = list[devname]
|
|
|
|
if(pid == dev['pid'] and
|
|
|
|
self.start <= dev['start'] and
|
|
|
|
self.end >= dev['end']):
|
|
|
|
dev['ftrace'] = self
|
2018-01-30 08:17:20 +00:00
|
|
|
found = devname
|
2016-07-15 21:34:14 +00:00
|
|
|
break
|
|
|
|
break
|
|
|
|
return found
|
|
|
|
def newActionFromFunction(self, data):
|
2017-04-07 18:05:35 +00:00
|
|
|
name = self.name
|
2016-07-15 21:34:14 +00:00
|
|
|
if name in ['dpm_run_callback', 'dpm_prepare', 'dpm_complete']:
|
|
|
|
return
|
|
|
|
fs = self.start
|
|
|
|
fe = self.end
|
|
|
|
if fs < data.start or fe > data.end:
|
|
|
|
return
|
|
|
|
phase = ''
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
for p in data.sortedPhases():
|
2016-07-15 21:34:14 +00:00
|
|
|
if(data.dmesg[p]['start'] <= self.start and
|
|
|
|
self.start < data.dmesg[p]['end']):
|
|
|
|
phase = p
|
|
|
|
break
|
|
|
|
if not phase:
|
|
|
|
return
|
|
|
|
out = data.newActionGlobal(name, fs, fe, -2)
|
|
|
|
if out:
|
|
|
|
phase, myname = out
|
|
|
|
data.dmesg[phase]['list'][myname]['ftrace'] = self
|
2018-01-30 08:17:20 +00:00
|
|
|
def debugPrint(self, info=''):
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint('%s pid=%d [%f - %f] %.3f us' % \
|
2018-01-30 08:17:20 +00:00
|
|
|
(self.name, self.pid, self.start, self.end,
|
2018-10-08 22:56:32 +00:00
|
|
|
(self.end - self.start)*1000000))
|
2016-07-15 21:34:14 +00:00
|
|
|
for l in self.list:
|
2018-01-30 08:17:20 +00:00
|
|
|
if l.isLeaf():
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint('%f (%02d): %s(); (%.3f us)%s' % (l.time, \
|
2018-01-30 08:17:20 +00:00
|
|
|
l.depth, l.name, l.length*1000000, info))
|
|
|
|
elif l.freturn:
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint('%f (%02d): %s} (%.3f us)%s' % (l.time, \
|
2018-01-30 08:17:20 +00:00
|
|
|
l.depth, l.name, l.length*1000000, info))
|
2016-07-15 21:34:14 +00:00
|
|
|
else:
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint('%f (%02d): %s() { (%.3f us)%s' % (l.time, \
|
2018-01-30 08:17:20 +00:00
|
|
|
l.depth, l.name, l.length*1000000, info))
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint(' ')
|
2014-01-17 00:18:22 +00:00
|
|
|
|
2016-12-14 18:37:05 +00:00
|
|
|
class DevItem:
|
|
|
|
def __init__(self, test, phase, dev):
|
|
|
|
self.test = test
|
|
|
|
self.phase = phase
|
|
|
|
self.dev = dev
|
2016-12-14 18:37:06 +00:00
|
|
|
def isa(self, cls):
|
|
|
|
if 'htmlclass' in self.dev and cls in self.dev['htmlclass']:
|
|
|
|
return True
|
|
|
|
return False
|
2016-12-14 18:37:05 +00:00
|
|
|
|
2014-08-08 16:11:59 +00:00
|
|
|
# Class: Timeline
|
|
|
|
# Description:
|
2016-07-15 21:34:14 +00:00
|
|
|
# A container for a device timeline which calculates
|
|
|
|
# all the html properties to display it correctly
|
2014-01-17 00:18:22 +00:00
|
|
|
class Timeline:
|
2017-04-07 18:05:35 +00:00
|
|
|
html_tblock = '<div id="block{0}" class="tblock" style="left:{1}%;width:{2}%;"><div class="tback" style="height:{3}px"></div>\n'
|
|
|
|
html_device = '<div id="{0}" title="{1}" class="thread{7}" style="left:{2}%;top:{3}px;height:{4}px;width:{5}%;{8}">{6}</div>\n'
|
|
|
|
html_phase = '<div class="phase" style="left:{0}%;width:{1}%;top:{2}px;height:{3}px;background:{4}">{5}</div>\n'
|
|
|
|
html_phaselet = '<div id="{0}" class="phaselet" style="left:{1}%;width:{2}%;background:{3}"></div>\n'
|
2017-07-05 21:42:55 +00:00
|
|
|
html_legend = '<div id="p{3}" class="square" style="left:{0}%;background:{1}"> {2}</div>\n'
|
2016-12-14 18:37:07 +00:00
|
|
|
def __init__(self, rowheight, scaleheight):
|
2017-04-07 18:05:35 +00:00
|
|
|
self.html = ''
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
self.height = 0 # total timeline height
|
|
|
|
self.scaleH = scaleheight # timescale (top) row height
|
|
|
|
self.rowH = rowheight # device row height
|
|
|
|
self.bodyH = 0 # body height
|
|
|
|
self.rows = 0 # total timeline rows
|
|
|
|
self.rowlines = dict()
|
|
|
|
self.rowheight = dict()
|
2018-01-30 08:17:20 +00:00
|
|
|
def createHeader(self, sv, stamp):
|
|
|
|
if(not stamp['time']):
|
2017-04-07 18:05:35 +00:00
|
|
|
return
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
self.html += '<div class="version"><a href="https://01.org/pm-graph">%s v%s</a></div>' \
|
2017-04-07 18:05:35 +00:00
|
|
|
% (sv.title, sv.version)
|
2017-07-05 21:42:55 +00:00
|
|
|
if sv.logmsg and sv.testlog:
|
|
|
|
self.html += '<button id="showtest" class="logbtn btnfmt">log</button>'
|
|
|
|
if sv.dmesglog:
|
|
|
|
self.html += '<button id="showdmesg" class="logbtn btnfmt">dmesg</button>'
|
|
|
|
if sv.ftracelog:
|
|
|
|
self.html += '<button id="showftrace" class="logbtn btnfmt">ftrace</button>'
|
2017-04-07 18:05:35 +00:00
|
|
|
headline_stamp = '<div class="stamp">{0} {1} {2} {3}</div>\n'
|
2018-01-30 08:17:20 +00:00
|
|
|
self.html += headline_stamp.format(stamp['host'], stamp['kernel'],
|
|
|
|
stamp['mode'], stamp['time'])
|
|
|
|
if 'man' in stamp and 'plat' in stamp and 'cpu' in stamp and \
|
|
|
|
stamp['man'] and stamp['plat'] and stamp['cpu']:
|
2017-07-05 21:42:55 +00:00
|
|
|
headline_sysinfo = '<div class="stamp sysinfo">{0} {1} <i>with</i> {2}</div>\n'
|
2018-01-30 08:17:20 +00:00
|
|
|
self.html += headline_sysinfo.format(stamp['man'], stamp['plat'], stamp['cpu'])
|
2017-07-05 21:42:55 +00:00
|
|
|
|
2016-07-15 21:34:14 +00:00
|
|
|
# Function: getDeviceRows
|
|
|
|
# Description:
|
|
|
|
# determine how may rows the device funcs will take
|
|
|
|
# Arguments:
|
|
|
|
# rawlist: the list of devices/actions for a single phase
|
|
|
|
# Output:
|
|
|
|
# The total number of rows needed to display this phase of the timeline
|
|
|
|
def getDeviceRows(self, rawlist):
|
|
|
|
# clear all rows and set them to undefined
|
2016-12-14 18:37:05 +00:00
|
|
|
sortdict = dict()
|
2016-07-15 21:34:14 +00:00
|
|
|
for item in rawlist:
|
|
|
|
item.row = -1
|
2016-12-14 18:37:05 +00:00
|
|
|
sortdict[item] = item.length
|
|
|
|
sortlist = sorted(sortdict, key=sortdict.get, reverse=True)
|
|
|
|
remaining = len(sortlist)
|
2016-07-15 21:34:14 +00:00
|
|
|
rowdata = dict()
|
|
|
|
row = 1
|
|
|
|
# try to pack each row with as many ranges as possible
|
|
|
|
while(remaining > 0):
|
|
|
|
if(row not in rowdata):
|
|
|
|
rowdata[row] = []
|
2016-12-14 18:37:05 +00:00
|
|
|
for i in sortlist:
|
2016-07-15 21:34:14 +00:00
|
|
|
if(i.row >= 0):
|
|
|
|
continue
|
|
|
|
s = i.time
|
|
|
|
e = i.time + i.length
|
|
|
|
valid = True
|
|
|
|
for ritem in rowdata[row]:
|
|
|
|
rs = ritem.time
|
|
|
|
re = ritem.time + ritem.length
|
|
|
|
if(not (((s <= rs) and (e <= rs)) or
|
|
|
|
((s >= re) and (e >= re)))):
|
|
|
|
valid = False
|
|
|
|
break
|
|
|
|
if(valid):
|
|
|
|
rowdata[row].append(i)
|
|
|
|
i.row = row
|
|
|
|
remaining -= 1
|
|
|
|
row += 1
|
|
|
|
return row
|
|
|
|
# Function: getPhaseRows
|
|
|
|
# Description:
|
|
|
|
# Organize the timeline entries into the smallest
|
|
|
|
# number of rows possible, with no entry overlapping
|
|
|
|
# Arguments:
|
2016-12-14 18:37:05 +00:00
|
|
|
# devlist: the list of devices/actions in a group of contiguous phases
|
2016-07-15 21:34:14 +00:00
|
|
|
# Output:
|
|
|
|
# The total number of rows needed to display this phase of the timeline
|
2017-07-05 21:42:55 +00:00
|
|
|
def getPhaseRows(self, devlist, row=0, sortby='length'):
|
2016-07-15 21:34:14 +00:00
|
|
|
# clear all rows and set them to undefined
|
|
|
|
remaining = len(devlist)
|
|
|
|
rowdata = dict()
|
2016-12-14 18:37:05 +00:00
|
|
|
sortdict = dict()
|
2016-07-15 21:34:14 +00:00
|
|
|
myphases = []
|
2016-12-14 18:37:05 +00:00
|
|
|
# initialize all device rows to -1 and calculate devrows
|
2016-07-15 21:34:14 +00:00
|
|
|
for item in devlist:
|
2016-12-14 18:37:05 +00:00
|
|
|
dev = item.dev
|
|
|
|
tp = (item.test, item.phase)
|
|
|
|
if tp not in myphases:
|
|
|
|
myphases.append(tp)
|
2016-07-15 21:34:14 +00:00
|
|
|
dev['row'] = -1
|
2017-07-05 21:42:55 +00:00
|
|
|
if sortby == 'start':
|
|
|
|
# sort by start 1st, then length 2nd
|
|
|
|
sortdict[item] = (-1*float(dev['start']), float(dev['end']) - float(dev['start']))
|
|
|
|
else:
|
|
|
|
# sort by length 1st, then name 2nd
|
|
|
|
sortdict[item] = (float(dev['end']) - float(dev['start']), item.dev['name'])
|
2016-07-15 21:34:14 +00:00
|
|
|
if 'src' in dev:
|
|
|
|
dev['devrows'] = self.getDeviceRows(dev['src'])
|
2016-12-14 18:37:05 +00:00
|
|
|
# sort the devlist by length so that large items graph on top
|
|
|
|
sortlist = sorted(sortdict, key=sortdict.get, reverse=True)
|
2016-07-15 21:34:14 +00:00
|
|
|
orderedlist = []
|
2016-12-14 18:37:05 +00:00
|
|
|
for item in sortlist:
|
|
|
|
if item.dev['pid'] == -2:
|
2016-07-15 21:34:14 +00:00
|
|
|
orderedlist.append(item)
|
2016-12-14 18:37:05 +00:00
|
|
|
for item in sortlist:
|
2016-07-15 21:34:14 +00:00
|
|
|
if item not in orderedlist:
|
|
|
|
orderedlist.append(item)
|
2016-12-14 18:37:05 +00:00
|
|
|
# try to pack each row with as many devices as possible
|
2016-07-15 21:34:14 +00:00
|
|
|
while(remaining > 0):
|
|
|
|
rowheight = 1
|
|
|
|
if(row not in rowdata):
|
|
|
|
rowdata[row] = []
|
|
|
|
for item in orderedlist:
|
2016-12-14 18:37:05 +00:00
|
|
|
dev = item.dev
|
2016-07-15 21:34:14 +00:00
|
|
|
if(dev['row'] < 0):
|
|
|
|
s = dev['start']
|
|
|
|
e = dev['end']
|
|
|
|
valid = True
|
|
|
|
for ritem in rowdata[row]:
|
2016-12-14 18:37:05 +00:00
|
|
|
rs = ritem.dev['start']
|
|
|
|
re = ritem.dev['end']
|
2016-07-15 21:34:14 +00:00
|
|
|
if(not (((s <= rs) and (e <= rs)) or
|
|
|
|
((s >= re) and (e >= re)))):
|
|
|
|
valid = False
|
|
|
|
break
|
|
|
|
if(valid):
|
2016-12-14 18:37:05 +00:00
|
|
|
rowdata[row].append(item)
|
2016-07-15 21:34:14 +00:00
|
|
|
dev['row'] = row
|
|
|
|
remaining -= 1
|
|
|
|
if 'devrows' in dev and dev['devrows'] > rowheight:
|
|
|
|
rowheight = dev['devrows']
|
2016-12-14 18:37:05 +00:00
|
|
|
for t, p in myphases:
|
|
|
|
if t not in self.rowlines or t not in self.rowheight:
|
|
|
|
self.rowlines[t] = dict()
|
|
|
|
self.rowheight[t] = dict()
|
|
|
|
if p not in self.rowlines[t] or p not in self.rowheight[t]:
|
|
|
|
self.rowlines[t][p] = dict()
|
|
|
|
self.rowheight[t][p] = dict()
|
2016-12-14 18:37:06 +00:00
|
|
|
rh = self.rowH
|
|
|
|
# section headers should use a different row height
|
|
|
|
if len(rowdata[row]) == 1 and \
|
|
|
|
'htmlclass' in rowdata[row][0].dev and \
|
|
|
|
'sec' in rowdata[row][0].dev['htmlclass']:
|
|
|
|
rh = 15
|
2016-12-14 18:37:05 +00:00
|
|
|
self.rowlines[t][p][row] = rowheight
|
2016-12-14 18:37:06 +00:00
|
|
|
self.rowheight[t][p][row] = rowheight * rh
|
2016-07-15 21:34:14 +00:00
|
|
|
row += 1
|
|
|
|
if(row > self.rows):
|
|
|
|
self.rows = int(row)
|
|
|
|
return row
|
2016-12-14 18:37:05 +00:00
|
|
|
def phaseRowHeight(self, test, phase, row):
|
|
|
|
return self.rowheight[test][phase][row]
|
|
|
|
def phaseRowTop(self, test, phase, row):
|
2016-07-15 21:34:14 +00:00
|
|
|
top = 0
|
2016-12-14 18:37:05 +00:00
|
|
|
for i in sorted(self.rowheight[test][phase]):
|
2016-07-15 21:34:14 +00:00
|
|
|
if i >= row:
|
|
|
|
break
|
2016-12-14 18:37:05 +00:00
|
|
|
top += self.rowheight[test][phase][i]
|
2016-07-15 21:34:14 +00:00
|
|
|
return top
|
|
|
|
def calcTotalRows(self):
|
2017-04-07 18:05:35 +00:00
|
|
|
# Calculate the heights and offsets for the header and rows
|
2016-07-15 21:34:14 +00:00
|
|
|
maxrows = 0
|
|
|
|
standardphases = []
|
2016-12-14 18:37:05 +00:00
|
|
|
for t in self.rowlines:
|
|
|
|
for p in self.rowlines[t]:
|
|
|
|
total = 0
|
|
|
|
for i in sorted(self.rowlines[t][p]):
|
|
|
|
total += self.rowlines[t][p][i]
|
|
|
|
if total > maxrows:
|
|
|
|
maxrows = total
|
|
|
|
if total == len(self.rowlines[t][p]):
|
|
|
|
standardphases.append((t, p))
|
2016-07-15 21:34:14 +00:00
|
|
|
self.height = self.scaleH + (maxrows*self.rowH)
|
|
|
|
self.bodyH = self.height - self.scaleH
|
2016-12-14 18:37:05 +00:00
|
|
|
# if there is 1 line per row, draw them the standard way
|
|
|
|
for t, p in standardphases:
|
|
|
|
for i in sorted(self.rowheight[t][p]):
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
self.rowheight[t][p][i] = float(self.bodyH)/len(self.rowlines[t][p])
|
2017-04-07 18:05:35 +00:00
|
|
|
def createZoomBox(self, mode='command', testcount=1):
|
|
|
|
# Create bounding box, add buttons
|
|
|
|
html_zoombox = '<center><button id="zoomin">ZOOM IN +</button><button id="zoomout">ZOOM OUT -</button><button id="zoomdef">ZOOM 1:1</button></center>\n'
|
|
|
|
html_timeline = '<div id="dmesgzoombox" class="zoombox">\n<div id="{0}" class="timeline" style="height:{1}px">\n'
|
|
|
|
html_devlist1 = '<button id="devlist1" class="devlist" style="float:left;">Device Detail{0}</button>'
|
|
|
|
html_devlist2 = '<button id="devlist2" class="devlist" style="float:right;">Device Detail2</button>\n'
|
|
|
|
if mode != 'command':
|
|
|
|
if testcount > 1:
|
|
|
|
self.html += html_devlist2
|
|
|
|
self.html += html_devlist1.format('1')
|
|
|
|
else:
|
|
|
|
self.html += html_devlist1.format('')
|
|
|
|
self.html += html_zoombox
|
|
|
|
self.html += html_timeline.format('dmesg', self.height)
|
2016-07-15 21:34:14 +00:00
|
|
|
# Function: createTimeScale
|
|
|
|
# Description:
|
|
|
|
# Create the timescale for a timeline block
|
|
|
|
# Arguments:
|
|
|
|
# m0: start time (mode begin)
|
|
|
|
# mMax: end time (mode end)
|
|
|
|
# tTotal: total timeline time
|
|
|
|
# mode: suspend or resume
|
|
|
|
# Output:
|
|
|
|
# The html code needed to display the time scale
|
|
|
|
def createTimeScale(self, m0, mMax, tTotal, mode):
|
|
|
|
timescale = '<div class="t" style="right:{0}%">{1}</div>\n'
|
2017-04-07 18:05:35 +00:00
|
|
|
rline = '<div class="t" style="left:0;border-left:1px solid black;border-right:0;">{0}</div>\n'
|
2016-07-15 21:34:14 +00:00
|
|
|
output = '<div class="timescale">\n'
|
|
|
|
# set scale for timeline
|
|
|
|
mTotal = mMax - m0
|
|
|
|
tS = 0.1
|
|
|
|
if(tTotal <= 0):
|
|
|
|
return output+'</div>\n'
|
|
|
|
if(tTotal > 4):
|
|
|
|
tS = 1
|
|
|
|
divTotal = int(mTotal/tS) + 1
|
|
|
|
divEdge = (mTotal - tS*(divTotal-1))*100/mTotal
|
|
|
|
for i in range(divTotal):
|
|
|
|
htmlline = ''
|
2017-04-07 18:05:35 +00:00
|
|
|
if(mode == 'suspend'):
|
2016-07-15 21:34:14 +00:00
|
|
|
pos = '%0.3f' % (100 - ((float(i)*tS*100)/mTotal) - divEdge)
|
|
|
|
val = '%0.fms' % (float(i-divTotal+1)*tS*1000)
|
|
|
|
if(i == divTotal - 1):
|
2017-04-07 18:05:35 +00:00
|
|
|
val = mode
|
|
|
|
htmlline = timescale.format(pos, val)
|
|
|
|
else:
|
|
|
|
pos = '%0.3f' % (100 - ((float(i)*tS*100)/mTotal))
|
|
|
|
val = '%0.fms' % (float(i)*tS*1000)
|
2016-07-15 21:34:14 +00:00
|
|
|
htmlline = timescale.format(pos, val)
|
2017-04-07 18:05:35 +00:00
|
|
|
if(i == 0):
|
|
|
|
htmlline = rline.format(mode)
|
2016-07-15 21:34:14 +00:00
|
|
|
output += htmlline
|
2017-04-07 18:05:35 +00:00
|
|
|
self.html += output+'</div>\n'
|
2014-01-17 00:18:22 +00:00
|
|
|
|
2016-07-15 21:34:14 +00:00
|
|
|
# Class: TestProps
|
2014-08-08 16:11:59 +00:00
|
|
|
# Description:
|
2016-07-15 21:34:14 +00:00
|
|
|
# A list of values describing the properties of these test runs
|
|
|
|
class TestProps:
|
2017-07-05 21:42:55 +00:00
|
|
|
stampfmt = '# [a-z]*-(?P<m>[0-9]{2})(?P<d>[0-9]{2})(?P<y>[0-9]{2})-'+\
|
|
|
|
'(?P<H>[0-9]{2})(?P<M>[0-9]{2})(?P<S>[0-9]{2})'+\
|
|
|
|
' (?P<host>.*) (?P<mode>.*) (?P<kernel>.*)$'
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
wififmt = '^# wifi *(?P<d>\S*) *(?P<s>\S*) *(?P<t>[0-9\.]+).*'
|
2019-05-14 17:53:57 +00:00
|
|
|
tstatfmt = '^# turbostat (?P<t>\S*)'
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
testerrfmt = '^# enter_sleep_error (?P<e>.*)'
|
2017-07-05 21:42:55 +00:00
|
|
|
sysinfofmt = '^# sysinfo .*'
|
2018-01-30 08:17:20 +00:00
|
|
|
cmdlinefmt = '^# command \| (?P<cmd>.*)'
|
2020-07-21 01:02:49 +00:00
|
|
|
kparamsfmt = '^# kparams \| (?P<kp>.*)'
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
devpropfmt = '# Device Properties: .*'
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
pinfofmt = '# platform-(?P<val>[a-z,A-Z,0-9]*): (?P<info>.*)'
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
tracertypefmt = '# tracer: (?P<t>.*)'
|
|
|
|
firmwarefmt = '# fwsuspend (?P<s>[0-9]*) fwresume (?P<r>[0-9]*)$'
|
|
|
|
procexecfmt = 'ps - (?P<ps>.*)$'
|
2014-08-08 16:11:59 +00:00
|
|
|
ftrace_line_fmt_fg = \
|
|
|
|
'^ *(?P<time>[0-9\.]*) *\| *(?P<cpu>[0-9]*)\)'+\
|
|
|
|
' *(?P<proc>.*)-(?P<pid>[0-9]*) *\|'+\
|
2016-07-15 21:34:14 +00:00
|
|
|
'[ +!#\*@$]*(?P<dur>[0-9\.]*) .*\| (?P<msg>.*)'
|
2014-08-08 16:11:59 +00:00
|
|
|
ftrace_line_fmt_nop = \
|
|
|
|
' *(?P<proc>.*)-(?P<pid>[0-9]*) *\[(?P<cpu>[0-9]*)\] *'+\
|
2020-07-21 01:02:49 +00:00
|
|
|
'(?P<flags>\S*) *(?P<time>[0-9\.]*): *'+\
|
2014-08-08 16:11:59 +00:00
|
|
|
'(?P<msg>.*)'
|
2020-07-21 01:02:49 +00:00
|
|
|
machinesuspend = 'machine_suspend\[.*'
|
2016-07-15 21:34:14 +00:00
|
|
|
def __init__(self):
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
self.stamp = ''
|
|
|
|
self.sysinfo = ''
|
|
|
|
self.cmdline = ''
|
|
|
|
self.testerror = []
|
2019-05-14 17:53:57 +00:00
|
|
|
self.turbostat = []
|
2019-05-14 17:53:58 +00:00
|
|
|
self.wifi = []
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
self.fwdata = []
|
|
|
|
self.ftrace_line_fmt = self.ftrace_line_fmt_nop
|
|
|
|
self.cgformat = False
|
|
|
|
self.data = 0
|
2016-07-15 21:34:14 +00:00
|
|
|
self.ktemp = dict()
|
2014-08-08 16:11:59 +00:00
|
|
|
def setTracerType(self, tracer):
|
|
|
|
if(tracer == 'function_graph'):
|
|
|
|
self.cgformat = True
|
|
|
|
self.ftrace_line_fmt = self.ftrace_line_fmt_fg
|
|
|
|
elif(tracer == 'nop'):
|
|
|
|
self.ftrace_line_fmt = self.ftrace_line_fmt_nop
|
|
|
|
else:
|
2016-12-14 18:37:07 +00:00
|
|
|
doError('Invalid tracer format: [%s]' % tracer)
|
2020-07-21 01:02:49 +00:00
|
|
|
def stampInfo(self, line, sv):
|
2019-05-14 17:53:57 +00:00
|
|
|
if re.match(self.stampfmt, line):
|
|
|
|
self.stamp = line
|
|
|
|
return True
|
|
|
|
elif re.match(self.sysinfofmt, line):
|
|
|
|
self.sysinfo = line
|
|
|
|
return True
|
|
|
|
elif re.match(self.tstatfmt, line):
|
|
|
|
self.turbostat.append(line)
|
|
|
|
return True
|
2019-05-14 17:53:58 +00:00
|
|
|
elif re.match(self.wififmt, line):
|
|
|
|
self.wifi.append(line)
|
|
|
|
return True
|
2019-05-14 17:53:57 +00:00
|
|
|
elif re.match(self.testerrfmt, line):
|
|
|
|
self.testerror.append(line)
|
|
|
|
return True
|
|
|
|
elif re.match(self.firmwarefmt, line):
|
|
|
|
self.fwdata.append(line)
|
|
|
|
return True
|
2020-07-21 01:02:49 +00:00
|
|
|
elif(re.match(self.devpropfmt, line)):
|
|
|
|
self.parseDevprops(line, sv)
|
|
|
|
return True
|
|
|
|
elif(re.match(self.pinfofmt, line)):
|
|
|
|
self.parsePlatformInfo(line, sv)
|
|
|
|
return True
|
|
|
|
m = re.match(self.cmdlinefmt, line)
|
|
|
|
if m:
|
|
|
|
self.cmdline = m.group('cmd')
|
|
|
|
return True
|
|
|
|
m = re.match(self.tracertypefmt, line)
|
|
|
|
if(m):
|
|
|
|
self.setTracerType(m.group('t'))
|
|
|
|
return True
|
2019-05-14 17:53:57 +00:00
|
|
|
return False
|
2017-07-05 21:42:55 +00:00
|
|
|
def parseStamp(self, data, sv):
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
# global test data
|
2017-07-05 21:42:55 +00:00
|
|
|
m = re.match(self.stampfmt, self.stamp)
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
if not self.stamp or not m:
|
|
|
|
doError('data does not include the expected stamp')
|
2017-07-05 21:42:55 +00:00
|
|
|
data.stamp = {'time': '', 'host': '', 'mode': ''}
|
|
|
|
dt = datetime(int(m.group('y'))+2000, int(m.group('m')),
|
|
|
|
int(m.group('d')), int(m.group('H')), int(m.group('M')),
|
|
|
|
int(m.group('S')))
|
|
|
|
data.stamp['time'] = dt.strftime('%B %d %Y, %I:%M:%S %p')
|
|
|
|
data.stamp['host'] = m.group('host')
|
|
|
|
data.stamp['mode'] = m.group('mode')
|
|
|
|
data.stamp['kernel'] = m.group('kernel')
|
|
|
|
if re.match(self.sysinfofmt, self.sysinfo):
|
|
|
|
for f in self.sysinfo.split('|'):
|
|
|
|
if '#' in f:
|
|
|
|
continue
|
|
|
|
tmp = f.strip().split(':', 1)
|
|
|
|
key = tmp[0]
|
|
|
|
val = tmp[1]
|
|
|
|
data.stamp[key] = val
|
|
|
|
sv.hostname = data.stamp['host']
|
|
|
|
sv.suspendmode = data.stamp['mode']
|
2020-07-21 01:02:49 +00:00
|
|
|
if sv.suspendmode == 'freeze':
|
|
|
|
self.machinesuspend = 'timekeeping_freeze\[.*'
|
|
|
|
else:
|
|
|
|
self.machinesuspend = 'machine_suspend\[.*'
|
2017-07-05 21:42:55 +00:00
|
|
|
if sv.suspendmode == 'command' and sv.ftracefile != '':
|
2018-01-30 08:17:20 +00:00
|
|
|
modes = ['on', 'freeze', 'standby', 'mem', 'disk']
|
2020-07-21 01:02:49 +00:00
|
|
|
fp = sv.openlog(sv.ftracefile, 'r')
|
2018-05-24 16:36:28 +00:00
|
|
|
for line in fp:
|
|
|
|
m = re.match('.* machine_suspend\[(?P<mode>.*)\]', line)
|
|
|
|
if m and m.group('mode') in ['1', '2', '3', '4']:
|
|
|
|
sv.suspendmode = modes[int(m.group('mode'))]
|
|
|
|
data.stamp['mode'] = sv.suspendmode
|
|
|
|
break
|
|
|
|
fp.close()
|
2020-07-21 01:02:49 +00:00
|
|
|
sv.cmdline = self.cmdline
|
2017-07-05 21:42:55 +00:00
|
|
|
if not sv.stamp:
|
|
|
|
sv.stamp = data.stamp
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
# firmware data
|
|
|
|
if sv.suspendmode == 'mem' and len(self.fwdata) > data.testnumber:
|
2019-05-14 17:53:57 +00:00
|
|
|
m = re.match(self.firmwarefmt, self.fwdata[data.testnumber])
|
|
|
|
if m:
|
|
|
|
data.fwSuspend, data.fwResume = int(m.group('s')), int(m.group('r'))
|
|
|
|
if(data.fwSuspend > 0 or data.fwResume > 0):
|
|
|
|
data.fwValid = True
|
|
|
|
# turbostat data
|
|
|
|
if len(self.turbostat) > data.testnumber:
|
|
|
|
m = re.match(self.tstatfmt, self.turbostat[data.testnumber])
|
|
|
|
if m:
|
|
|
|
data.turbostat = m.group('t')
|
2019-05-14 17:53:58 +00:00
|
|
|
# wifi data
|
|
|
|
if len(self.wifi) > data.testnumber:
|
|
|
|
m = re.match(self.wififmt, self.wifi[data.testnumber])
|
|
|
|
if m:
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
data.wifi = {'dev': m.group('d'), 'stat': m.group('s'),
|
|
|
|
'time': float(m.group('t'))}
|
|
|
|
data.stamp['wifi'] = m.group('d')
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
# sleep mode enter errors
|
|
|
|
if len(self.testerror) > data.testnumber:
|
|
|
|
m = re.match(self.testerrfmt, self.testerror[data.testnumber])
|
|
|
|
if m:
|
|
|
|
data.enterfail = m.group('e')
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
def devprops(self, data):
|
|
|
|
props = dict()
|
|
|
|
devlist = data.split(';')
|
|
|
|
for dev in devlist:
|
|
|
|
f = dev.split(',')
|
|
|
|
if len(f) < 3:
|
|
|
|
continue
|
|
|
|
dev = f[0]
|
|
|
|
props[dev] = DevProps()
|
|
|
|
props[dev].altname = f[1]
|
|
|
|
if int(f[2]):
|
|
|
|
props[dev].isasync = True
|
|
|
|
else:
|
|
|
|
props[dev].isasync = False
|
|
|
|
return props
|
|
|
|
def parseDevprops(self, line, sv):
|
|
|
|
idx = line.index(': ') + 2
|
|
|
|
if idx >= len(line):
|
|
|
|
return
|
|
|
|
props = self.devprops(line[idx:])
|
|
|
|
if sv.suspendmode == 'command' and 'testcommandstring' in props:
|
|
|
|
sv.testcommand = props['testcommandstring'].altname
|
|
|
|
sv.devprops = props
|
|
|
|
def parsePlatformInfo(self, line, sv):
|
|
|
|
m = re.match(self.pinfofmt, line)
|
|
|
|
if not m:
|
|
|
|
return
|
|
|
|
name, info = m.group('val'), m.group('info')
|
|
|
|
if name == 'devinfo':
|
|
|
|
sv.devprops = self.devprops(sv.b64unzip(info))
|
|
|
|
return
|
|
|
|
elif name == 'testcmd':
|
|
|
|
sv.testcommand = info
|
|
|
|
return
|
|
|
|
field = info.split('|')
|
|
|
|
if len(field) < 2:
|
|
|
|
return
|
|
|
|
cmdline = field[0].strip()
|
|
|
|
output = sv.b64unzip(field[1].strip())
|
|
|
|
sv.platinfo.append([name, cmdline, output])
|
2014-01-17 00:18:22 +00:00
|
|
|
|
2016-07-15 21:34:14 +00:00
|
|
|
# Class: TestRun
|
|
|
|
# Description:
|
|
|
|
# A container for a suspend/resume test run. This is necessary as
|
|
|
|
# there could be more than one, and they need to be separate.
|
|
|
|
class TestRun:
|
|
|
|
def __init__(self, dataobj):
|
|
|
|
self.data = dataobj
|
|
|
|
self.ftemp = dict()
|
|
|
|
self.ttemp = dict()
|
|
|
|
|
2016-12-14 18:37:05 +00:00
|
|
|
class ProcessMonitor:
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
def __init__(self):
|
|
|
|
self.proclist = dict()
|
|
|
|
self.running = False
|
2016-12-14 18:37:05 +00:00
|
|
|
def procstat(self):
|
|
|
|
c = ['cat /proc/[1-9]*/stat 2>/dev/null']
|
2016-12-14 18:37:06 +00:00
|
|
|
process = Popen(c, shell=True, stdout=PIPE)
|
2016-12-14 18:37:05 +00:00
|
|
|
running = dict()
|
|
|
|
for line in process.stdout:
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
data = ascii(line).split()
|
2016-12-14 18:37:05 +00:00
|
|
|
pid = data[0]
|
|
|
|
name = re.sub('[()]', '', data[1])
|
|
|
|
user = int(data[13])
|
|
|
|
kern = int(data[14])
|
|
|
|
kjiff = ujiff = 0
|
|
|
|
if pid not in self.proclist:
|
|
|
|
self.proclist[pid] = {'name' : name, 'user' : user, 'kern' : kern}
|
|
|
|
else:
|
|
|
|
val = self.proclist[pid]
|
|
|
|
ujiff = user - val['user']
|
|
|
|
kjiff = kern - val['kern']
|
|
|
|
val['user'] = user
|
|
|
|
val['kern'] = kern
|
|
|
|
if ujiff > 0 or kjiff > 0:
|
|
|
|
running[pid] = ujiff + kjiff
|
2017-04-07 18:05:35 +00:00
|
|
|
process.wait()
|
2016-12-14 18:37:05 +00:00
|
|
|
out = ''
|
|
|
|
for pid in running:
|
|
|
|
jiffies = running[pid]
|
|
|
|
val = self.proclist[pid]
|
|
|
|
if out:
|
|
|
|
out += ','
|
|
|
|
out += '%s-%s %d' % (val['name'], pid, jiffies)
|
|
|
|
return 'ps - '+out
|
|
|
|
def processMonitor(self, tid):
|
|
|
|
while self.running:
|
|
|
|
out = self.procstat()
|
|
|
|
if out:
|
|
|
|
sysvals.fsetVal(out, 'trace_marker')
|
|
|
|
def start(self):
|
|
|
|
self.thread = Thread(target=self.processMonitor, args=(0,))
|
|
|
|
self.running = True
|
|
|
|
self.thread.start()
|
|
|
|
def stop(self):
|
|
|
|
self.running = False
|
|
|
|
|
2014-08-08 16:11:59 +00:00
|
|
|
# ----------------- FUNCTIONS --------------------
|
2014-01-17 00:18:22 +00:00
|
|
|
|
2014-08-08 16:11:59 +00:00
|
|
|
# Function: doesTraceLogHaveTraceEvents
|
|
|
|
# Description:
|
2018-01-30 08:17:20 +00:00
|
|
|
# Quickly determine if the ftrace log has all of the trace events,
|
|
|
|
# markers, and/or kprobes required for primary parsing.
|
2014-08-08 16:11:59 +00:00
|
|
|
def doesTraceLogHaveTraceEvents():
|
2019-05-14 17:53:58 +00:00
|
|
|
kpcheck = ['_cal: (', '_ret: (']
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
techeck = ['suspend_resume', 'device_pm_callback']
|
2019-05-14 17:53:58 +00:00
|
|
|
tmcheck = ['SUSPEND START', 'RESUME COMPLETE']
|
2016-07-15 21:34:14 +00:00
|
|
|
sysvals.usekprobes = False
|
2018-01-30 08:17:20 +00:00
|
|
|
fp = sysvals.openlog(sysvals.ftracefile, 'r')
|
|
|
|
for line in fp:
|
|
|
|
# check for kprobes
|
|
|
|
if not sysvals.usekprobes:
|
|
|
|
for i in kpcheck:
|
|
|
|
if i in line:
|
|
|
|
sysvals.usekprobes = True
|
|
|
|
# check for all necessary trace events
|
|
|
|
check = techeck[:]
|
|
|
|
for i in techeck:
|
|
|
|
if i in line:
|
|
|
|
check.remove(i)
|
|
|
|
techeck = check
|
|
|
|
# check for all necessary trace markers
|
|
|
|
check = tmcheck[:]
|
|
|
|
for i in tmcheck:
|
|
|
|
if i in line:
|
|
|
|
check.remove(i)
|
|
|
|
tmcheck = check
|
|
|
|
fp.close()
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
sysvals.usetraceevents = True if len(techeck) < 2 else False
|
|
|
|
sysvals.usetracemarkers = True if len(tmcheck) == 0 else False
|
2014-08-08 16:11:59 +00:00
|
|
|
|
|
|
|
# Function: appendIncompleteTraceLog
|
|
|
|
# Description:
|
|
|
|
# [deprecated for kernel 3.15 or newer]
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
# Adds callgraph data which lacks trace event data. This is only
|
|
|
|
# for timelines generated from 3.15 or older
|
2014-08-08 16:11:59 +00:00
|
|
|
# Arguments:
|
|
|
|
# testruns: the array of Data objects obtained from parseKernelLog
|
|
|
|
def appendIncompleteTraceLog(testruns):
|
|
|
|
# create TestRun vessels for ftrace parsing
|
|
|
|
testcnt = len(testruns)
|
2016-07-15 21:34:14 +00:00
|
|
|
testidx = 0
|
2014-08-08 16:11:59 +00:00
|
|
|
testrun = []
|
|
|
|
for data in testruns:
|
|
|
|
testrun.append(TestRun(data))
|
|
|
|
|
|
|
|
# extract the callgraph and traceevent data
|
2018-01-30 08:17:20 +00:00
|
|
|
sysvals.vprint('Analyzing the ftrace data (%s)...' % \
|
|
|
|
os.path.basename(sysvals.ftracefile))
|
2016-07-15 21:34:14 +00:00
|
|
|
tp = TestProps()
|
2018-01-30 08:17:20 +00:00
|
|
|
tf = sysvals.openlog(sysvals.ftracefile, 'r')
|
2016-07-15 21:34:14 +00:00
|
|
|
data = 0
|
2014-01-17 00:18:22 +00:00
|
|
|
for line in tf:
|
2014-08-08 16:11:59 +00:00
|
|
|
# remove any latent carriage returns
|
|
|
|
line = line.replace('\r\n', '')
|
2020-07-21 01:02:49 +00:00
|
|
|
if tp.stampInfo(line, sysvals):
|
2014-01-17 00:18:22 +00:00
|
|
|
continue
|
2016-07-15 21:34:14 +00:00
|
|
|
# parse only valid lines, if this is not one move on
|
|
|
|
m = re.match(tp.ftrace_line_fmt, line)
|
2014-01-17 00:18:22 +00:00
|
|
|
if(not m):
|
|
|
|
continue
|
2014-08-08 16:11:59 +00:00
|
|
|
# gather the basic message data from the line
|
|
|
|
m_time = m.group('time')
|
|
|
|
m_pid = m.group('pid')
|
|
|
|
m_msg = m.group('msg')
|
2016-07-15 21:34:14 +00:00
|
|
|
if(tp.cgformat):
|
2014-08-08 16:11:59 +00:00
|
|
|
m_param3 = m.group('dur')
|
|
|
|
else:
|
|
|
|
m_param3 = 'traceevent'
|
2014-01-17 00:18:22 +00:00
|
|
|
if(m_time and m_pid and m_msg):
|
2014-08-08 16:11:59 +00:00
|
|
|
t = FTraceLine(m_time, m_msg, m_param3)
|
2014-01-17 00:18:22 +00:00
|
|
|
pid = int(m_pid)
|
|
|
|
else:
|
|
|
|
continue
|
|
|
|
# the line should be a call, return, or event
|
|
|
|
if(not t.fcall and not t.freturn and not t.fevent):
|
|
|
|
continue
|
2016-07-15 21:34:14 +00:00
|
|
|
# look for the suspend start marker
|
|
|
|
if(t.startMarker()):
|
|
|
|
data = testrun[testidx].data
|
2017-07-05 21:42:55 +00:00
|
|
|
tp.parseStamp(data, sysvals)
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
data.setStart(t.time, t.name)
|
2016-07-15 21:34:14 +00:00
|
|
|
continue
|
|
|
|
if(not data):
|
|
|
|
continue
|
|
|
|
# find the end of resume
|
|
|
|
if(t.endMarker()):
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
data.setEnd(t.time, t.name)
|
2016-07-15 21:34:14 +00:00
|
|
|
testidx += 1
|
|
|
|
if(testidx >= testcnt):
|
|
|
|
break
|
|
|
|
continue
|
|
|
|
# trace event processing
|
|
|
|
if(t.fevent):
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
continue
|
2016-07-15 21:34:14 +00:00
|
|
|
# call/return processing
|
|
|
|
elif sysvals.usecallgraph:
|
|
|
|
# create a callgraph object for the data
|
|
|
|
if(pid not in testrun[testidx].ftemp):
|
|
|
|
testrun[testidx].ftemp[pid] = []
|
2018-01-30 08:17:20 +00:00
|
|
|
testrun[testidx].ftemp[pid].append(FTraceCallGraph(pid, sysvals))
|
2016-07-15 21:34:14 +00:00
|
|
|
# when the call is finished, see which device matches it
|
|
|
|
cg = testrun[testidx].ftemp[pid][-1]
|
2018-01-30 08:17:20 +00:00
|
|
|
res = cg.addLine(t)
|
|
|
|
if(res != 0):
|
|
|
|
testrun[testidx].ftemp[pid].append(FTraceCallGraph(pid, sysvals))
|
|
|
|
if(res == -1):
|
|
|
|
testrun[testidx].ftemp[pid][-1].addLine(t)
|
2014-08-08 16:11:59 +00:00
|
|
|
tf.close()
|
|
|
|
|
|
|
|
for test in testrun:
|
|
|
|
# add the callgraph data to the device hierarchy
|
|
|
|
for pid in test.ftemp:
|
|
|
|
for cg in test.ftemp[pid]:
|
2018-01-30 08:17:20 +00:00
|
|
|
if len(cg.list) < 1 or cg.invalid or (cg.end - cg.start == 0):
|
2016-07-15 21:34:14 +00:00
|
|
|
continue
|
|
|
|
if(not cg.postProcess()):
|
2014-08-08 16:11:59 +00:00
|
|
|
id = 'task %s cpu %s' % (pid, m.group('cpu'))
|
2018-01-30 08:17:20 +00:00
|
|
|
sysvals.vprint('Sanity check failed for '+\
|
2014-08-08 16:11:59 +00:00
|
|
|
id+', ignoring this callback')
|
|
|
|
continue
|
|
|
|
callstart = cg.start
|
|
|
|
callend = cg.end
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
for p in test.data.sortedPhases():
|
2014-08-08 16:11:59 +00:00
|
|
|
if(test.data.dmesg[p]['start'] <= callstart and
|
|
|
|
callstart <= test.data.dmesg[p]['end']):
|
|
|
|
list = test.data.dmesg[p]['list']
|
|
|
|
for devname in list:
|
|
|
|
dev = list[devname]
|
|
|
|
if(pid == dev['pid'] and
|
|
|
|
callstart <= dev['start'] and
|
|
|
|
callend >= dev['end']):
|
|
|
|
dev['ftrace'] = cg
|
|
|
|
break
|
|
|
|
|
|
|
|
# Function: parseTraceLog
|
|
|
|
# Description:
|
|
|
|
# Analyze an ftrace log output file generated from this app during
|
|
|
|
# the execution phase. Used when the ftrace log is the primary data source
|
|
|
|
# and includes the suspend_resume and device_pm_callback trace events
|
|
|
|
# The ftrace filename is taken from sysvals
|
|
|
|
# Output:
|
|
|
|
# An array of Data objects
|
2018-01-30 08:17:20 +00:00
|
|
|
def parseTraceLog(live=False):
|
|
|
|
sysvals.vprint('Analyzing the ftrace data (%s)...' % \
|
|
|
|
os.path.basename(sysvals.ftracefile))
|
2014-08-08 16:11:59 +00:00
|
|
|
if(os.path.exists(sysvals.ftracefile) == False):
|
2016-12-14 18:37:07 +00:00
|
|
|
doError('%s does not exist' % sysvals.ftracefile)
|
2018-01-30 08:17:20 +00:00
|
|
|
if not live:
|
|
|
|
sysvals.setupAllKprobes()
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
ksuscalls = ['ksys_sync', 'pm_prepare_console']
|
2018-10-08 22:56:32 +00:00
|
|
|
krescalls = ['pm_restore_console']
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
tracewatch = ['irq_wakeup']
|
2016-07-15 21:34:14 +00:00
|
|
|
if sysvals.usekprobes:
|
|
|
|
tracewatch += ['sync_filesystems', 'freeze_processes', 'syscore_suspend',
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
'syscore_resume', 'resume_console', 'thaw_processes', 'CPU_ON',
|
2020-07-21 01:02:49 +00:00
|
|
|
'CPU_OFF', 'acpi_suspend']
|
2014-08-08 16:11:59 +00:00
|
|
|
|
|
|
|
# extract the callgraph and traceevent data
|
2020-07-21 01:02:49 +00:00
|
|
|
s2idle_enter = hwsus = False
|
2016-07-15 21:34:14 +00:00
|
|
|
tp = TestProps()
|
2020-07-21 01:02:49 +00:00
|
|
|
testruns, testdata = [], []
|
|
|
|
testrun, data, limbo = 0, 0, True
|
2018-01-30 08:17:20 +00:00
|
|
|
tf = sysvals.openlog(sysvals.ftracefile, 'r')
|
2014-08-08 16:11:59 +00:00
|
|
|
phase = 'suspend_prepare'
|
|
|
|
for line in tf:
|
|
|
|
# remove any latent carriage returns
|
|
|
|
line = line.replace('\r\n', '')
|
2020-07-21 01:02:49 +00:00
|
|
|
if tp.stampInfo(line, sysvals):
|
2016-07-15 21:34:14 +00:00
|
|
|
continue
|
2016-12-14 18:37:05 +00:00
|
|
|
# ignore all other commented lines
|
|
|
|
if line[0] == '#':
|
|
|
|
continue
|
2014-08-08 16:11:59 +00:00
|
|
|
# ftrace line: parse only valid lines
|
2016-07-15 21:34:14 +00:00
|
|
|
m = re.match(tp.ftrace_line_fmt, line)
|
2014-08-08 16:11:59 +00:00
|
|
|
if(not m):
|
|
|
|
continue
|
|
|
|
# gather the basic message data from the line
|
|
|
|
m_time = m.group('time')
|
2016-07-15 21:34:14 +00:00
|
|
|
m_proc = m.group('proc')
|
2014-08-08 16:11:59 +00:00
|
|
|
m_pid = m.group('pid')
|
|
|
|
m_msg = m.group('msg')
|
2016-07-15 21:34:14 +00:00
|
|
|
if(tp.cgformat):
|
2014-08-08 16:11:59 +00:00
|
|
|
m_param3 = m.group('dur')
|
|
|
|
else:
|
|
|
|
m_param3 = 'traceevent'
|
|
|
|
if(m_time and m_pid and m_msg):
|
|
|
|
t = FTraceLine(m_time, m_msg, m_param3)
|
|
|
|
pid = int(m_pid)
|
|
|
|
else:
|
|
|
|
continue
|
|
|
|
# the line should be a call, return, or event
|
|
|
|
if(not t.fcall and not t.freturn and not t.fevent):
|
|
|
|
continue
|
2016-07-15 21:34:14 +00:00
|
|
|
# find the start of suspend
|
|
|
|
if(t.startMarker()):
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
data, limbo = Data(len(testdata)), False
|
2016-07-15 21:34:14 +00:00
|
|
|
testdata.append(data)
|
|
|
|
testrun = TestRun(data)
|
|
|
|
testruns.append(testrun)
|
2017-07-05 21:42:55 +00:00
|
|
|
tp.parseStamp(data, sysvals)
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
data.setStart(t.time, t.name)
|
2018-10-08 22:56:32 +00:00
|
|
|
data.first_suspend_prepare = True
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
phase = data.setPhase('suspend_prepare', t.time, True)
|
2016-07-15 21:34:14 +00:00
|
|
|
continue
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
if(not data or limbo):
|
2016-07-15 21:34:14 +00:00
|
|
|
continue
|
2016-12-14 18:37:05 +00:00
|
|
|
# process cpu exec line
|
|
|
|
if t.type == 'tracing_mark_write':
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
m = re.match(tp.procexecfmt, t.name)
|
2016-12-14 18:37:05 +00:00
|
|
|
if(m):
|
|
|
|
proclist = dict()
|
|
|
|
for ps in m.group('ps').split(','):
|
|
|
|
val = ps.split()
|
|
|
|
if not val:
|
|
|
|
continue
|
|
|
|
name = val[0].replace('--', '-')
|
|
|
|
proclist[name] = int(val[1])
|
|
|
|
data.pstl[t.time] = proclist
|
|
|
|
continue
|
2016-07-15 21:34:14 +00:00
|
|
|
# find the end of resume
|
|
|
|
if(t.endMarker()):
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
if data.tKernRes == 0:
|
|
|
|
data.tKernRes = t.time
|
|
|
|
data.handleEndMarker(t.time, t.name)
|
2016-07-15 21:34:14 +00:00
|
|
|
if(not sysvals.usetracemarkers):
|
|
|
|
# no trace markers? then quit and be sure to finish recording
|
|
|
|
# the event we used to trigger resume end
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
if('thaw_processes' in testrun.ttemp and len(testrun.ttemp['thaw_processes']) > 0):
|
2016-07-15 21:34:14 +00:00
|
|
|
# if an entry exists, assume this is its end
|
|
|
|
testrun.ttemp['thaw_processes'][-1]['end'] = t.time
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
limbo = True
|
2014-08-08 16:11:59 +00:00
|
|
|
continue
|
|
|
|
# trace event processing
|
|
|
|
if(t.fevent):
|
|
|
|
if(t.type == 'suspend_resume'):
|
|
|
|
# suspend_resume trace events have two types, begin and end
|
|
|
|
if(re.match('(?P<name>.*) begin$', t.name)):
|
|
|
|
isbegin = True
|
|
|
|
elif(re.match('(?P<name>.*) end$', t.name)):
|
|
|
|
isbegin = False
|
|
|
|
else:
|
|
|
|
continue
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
if '[' in t.name:
|
|
|
|
m = re.match('(?P<name>.*)\[.*', t.name)
|
2014-08-08 16:11:59 +00:00
|
|
|
else:
|
|
|
|
m = re.match('(?P<name>.*) .*', t.name)
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
name = m.group('name')
|
2014-08-08 16:11:59 +00:00
|
|
|
# ignore these events
|
2016-07-15 21:34:14 +00:00
|
|
|
if(name.split('[')[0] in tracewatch):
|
2014-08-08 16:11:59 +00:00
|
|
|
continue
|
|
|
|
# -- phase changes --
|
2016-12-14 18:37:05 +00:00
|
|
|
# start of kernel suspend
|
|
|
|
if(re.match('suspend_enter\[.*', t.name)):
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
if(isbegin and data.tKernSus == 0):
|
2016-12-14 18:37:05 +00:00
|
|
|
data.tKernSus = t.time
|
|
|
|
continue
|
2014-08-08 16:11:59 +00:00
|
|
|
# suspend_prepare start
|
2016-12-14 18:37:05 +00:00
|
|
|
elif(re.match('dpm_prepare\[.*', t.name)):
|
2018-10-08 22:56:32 +00:00
|
|
|
if isbegin and data.first_suspend_prepare:
|
|
|
|
data.first_suspend_prepare = False
|
|
|
|
if data.tKernSus == 0:
|
|
|
|
data.tKernSus = t.time
|
|
|
|
continue
|
|
|
|
phase = data.setPhase('suspend_prepare', t.time, isbegin)
|
2014-08-08 16:11:59 +00:00
|
|
|
continue
|
|
|
|
# suspend start
|
|
|
|
elif(re.match('dpm_suspend\[.*', t.name)):
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
phase = data.setPhase('suspend', t.time, isbegin)
|
2014-08-08 16:11:59 +00:00
|
|
|
continue
|
|
|
|
# suspend_late start
|
|
|
|
elif(re.match('dpm_suspend_late\[.*', t.name)):
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
phase = data.setPhase('suspend_late', t.time, isbegin)
|
2014-08-08 16:11:59 +00:00
|
|
|
continue
|
|
|
|
# suspend_noirq start
|
|
|
|
elif(re.match('dpm_suspend_noirq\[.*', t.name)):
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
phase = data.setPhase('suspend_noirq', t.time, isbegin)
|
2014-08-08 16:11:59 +00:00
|
|
|
continue
|
|
|
|
# suspend_machine/resume_machine
|
2020-07-21 01:02:49 +00:00
|
|
|
elif(re.match(tp.machinesuspend, t.name)):
|
|
|
|
lp = data.lastPhase()
|
2014-08-08 16:11:59 +00:00
|
|
|
if(isbegin):
|
2020-07-21 01:02:49 +00:00
|
|
|
hwsus = True
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
if lp.startswith('resume_machine'):
|
2020-07-21 01:02:49 +00:00
|
|
|
# trim out s2idle loops, track time trying to freeze
|
|
|
|
llp = data.lastPhase(2)
|
|
|
|
if llp.startswith('suspend_machine'):
|
2020-11-11 02:36:17 +00:00
|
|
|
if 'waking' not in data.dmesg[llp]:
|
|
|
|
data.dmesg[llp]['waking'] = [0, 0.0]
|
|
|
|
data.dmesg[llp]['waking'][0] += 1
|
|
|
|
data.dmesg[llp]['waking'][1] += \
|
2020-07-21 01:02:49 +00:00
|
|
|
t.time - data.dmesg[lp]['start']
|
|
|
|
data.currphase = ''
|
|
|
|
del data.dmesg[lp]
|
|
|
|
continue
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
phase = data.setPhase('suspend_machine', data.dmesg[lp]['end'], True)
|
|
|
|
data.setPhase(phase, t.time, False)
|
|
|
|
if data.tSuspended == 0:
|
2014-08-08 16:11:59 +00:00
|
|
|
data.tSuspended = t.time
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
else:
|
2020-07-21 01:02:49 +00:00
|
|
|
if lp.startswith('resume_machine'):
|
|
|
|
data.dmesg[lp]['end'] = t.time
|
|
|
|
continue
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
phase = data.setPhase('resume_machine', t.time, True)
|
|
|
|
if(sysvals.suspendmode in ['mem', 'disk']):
|
2018-10-08 22:56:32 +00:00
|
|
|
susp = phase.replace('resume', 'suspend')
|
|
|
|
if susp in data.dmesg:
|
|
|
|
data.dmesg[susp]['end'] = t.time
|
2016-07-15 21:34:14 +00:00
|
|
|
data.tSuspended = t.time
|
2018-10-08 22:56:32 +00:00
|
|
|
data.tResumed = t.time
|
2016-07-15 21:34:14 +00:00
|
|
|
continue
|
2014-08-08 16:11:59 +00:00
|
|
|
# resume_noirq start
|
|
|
|
elif(re.match('dpm_resume_noirq\[.*', t.name)):
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
phase = data.setPhase('resume_noirq', t.time, isbegin)
|
2014-08-08 16:11:59 +00:00
|
|
|
continue
|
|
|
|
# resume_early start
|
|
|
|
elif(re.match('dpm_resume_early\[.*', t.name)):
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
phase = data.setPhase('resume_early', t.time, isbegin)
|
2014-08-08 16:11:59 +00:00
|
|
|
continue
|
|
|
|
# resume start
|
|
|
|
elif(re.match('dpm_resume\[.*', t.name)):
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
phase = data.setPhase('resume', t.time, isbegin)
|
2014-08-08 16:11:59 +00:00
|
|
|
continue
|
|
|
|
# resume complete start
|
|
|
|
elif(re.match('dpm_complete\[.*', t.name)):
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
phase = data.setPhase('resume_complete', t.time, isbegin)
|
2014-08-08 16:11:59 +00:00
|
|
|
continue
|
2016-07-15 21:34:14 +00:00
|
|
|
# skip trace events inside devices calls
|
|
|
|
if(not data.isTraceEventOutsideDeviceCalls(pid, t.time)):
|
|
|
|
continue
|
|
|
|
# global events (outside device calls) are graphed
|
|
|
|
if(name not in testrun.ttemp):
|
|
|
|
testrun.ttemp[name] = []
|
2020-07-21 01:02:49 +00:00
|
|
|
# special handling for s2idle_enter
|
|
|
|
if name == 'machine_suspend':
|
|
|
|
if hwsus:
|
|
|
|
s2idle_enter = hwsus = False
|
|
|
|
elif s2idle_enter and not isbegin:
|
|
|
|
if(len(testrun.ttemp[name]) > 0):
|
|
|
|
testrun.ttemp[name][-1]['end'] = t.time
|
|
|
|
testrun.ttemp[name][-1]['loop'] += 1
|
|
|
|
elif not s2idle_enter and isbegin:
|
|
|
|
s2idle_enter = True
|
|
|
|
testrun.ttemp[name].append({'begin': t.time,
|
|
|
|
'end': t.time, 'pid': pid, 'loop': 0})
|
|
|
|
continue
|
2016-07-15 21:34:14 +00:00
|
|
|
if(isbegin):
|
|
|
|
# create a new list entry
|
|
|
|
testrun.ttemp[name].append(\
|
|
|
|
{'begin': t.time, 'end': t.time, 'pid': pid})
|
2014-08-08 16:11:59 +00:00
|
|
|
else:
|
2016-07-15 21:34:14 +00:00
|
|
|
if(len(testrun.ttemp[name]) > 0):
|
|
|
|
# if an entry exists, assume this is its end
|
|
|
|
testrun.ttemp[name][-1]['end'] = t.time
|
2014-08-08 16:11:59 +00:00
|
|
|
# device callback start
|
|
|
|
elif(t.type == 'device_pm_callback_start'):
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
if phase not in data.dmesg:
|
|
|
|
continue
|
2014-08-08 16:11:59 +00:00
|
|
|
m = re.match('(?P<drv>.*) (?P<d>.*), parent: *(?P<p>.*), .*',\
|
|
|
|
t.name);
|
|
|
|
if(not m):
|
|
|
|
continue
|
|
|
|
drv = m.group('drv')
|
|
|
|
n = m.group('d')
|
|
|
|
p = m.group('p')
|
|
|
|
if(n and p):
|
|
|
|
data.newAction(phase, n, pid, p, t.time, -1, drv)
|
2016-12-14 18:37:05 +00:00
|
|
|
if pid not in data.devpids:
|
|
|
|
data.devpids.append(pid)
|
2014-08-08 16:11:59 +00:00
|
|
|
# device callback finish
|
|
|
|
elif(t.type == 'device_pm_callback_end'):
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
if phase not in data.dmesg:
|
|
|
|
continue
|
2014-08-08 16:11:59 +00:00
|
|
|
m = re.match('(?P<drv>.*) (?P<d>.*), err.*', t.name);
|
|
|
|
if(not m):
|
|
|
|
continue
|
|
|
|
n = m.group('d')
|
2020-07-21 01:02:49 +00:00
|
|
|
dev = data.findDevice(phase, n)
|
|
|
|
if dev:
|
2014-08-08 16:11:59 +00:00
|
|
|
dev['length'] = t.time - dev['start']
|
|
|
|
dev['end'] = t.time
|
2016-07-15 21:34:14 +00:00
|
|
|
# kprobe event processing
|
|
|
|
elif(t.fkprobe):
|
|
|
|
kprobename = t.type
|
|
|
|
kprobedata = t.name
|
|
|
|
key = (kprobename, pid)
|
|
|
|
# displayname is generated from kprobe data
|
|
|
|
displayname = ''
|
|
|
|
if(t.fcall):
|
|
|
|
displayname = sysvals.kprobeDisplayName(kprobename, kprobedata)
|
|
|
|
if not displayname:
|
|
|
|
continue
|
|
|
|
if(key not in tp.ktemp):
|
|
|
|
tp.ktemp[key] = []
|
|
|
|
tp.ktemp[key].append({
|
|
|
|
'pid': pid,
|
|
|
|
'begin': t.time,
|
2019-05-14 17:53:58 +00:00
|
|
|
'end': -1,
|
2016-07-15 21:34:14 +00:00
|
|
|
'name': displayname,
|
|
|
|
'cdata': kprobedata,
|
|
|
|
'proc': m_proc,
|
|
|
|
})
|
2018-10-08 22:56:32 +00:00
|
|
|
# start of kernel resume
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
if(data.tKernSus == 0 and phase == 'suspend_prepare' \
|
|
|
|
and kprobename in ksuscalls):
|
2018-10-08 22:56:32 +00:00
|
|
|
data.tKernSus = t.time
|
2016-07-15 21:34:14 +00:00
|
|
|
elif(t.freturn):
|
|
|
|
if(key not in tp.ktemp) or len(tp.ktemp[key]) < 1:
|
|
|
|
continue
|
2019-05-14 17:53:58 +00:00
|
|
|
e = next((x for x in reversed(tp.ktemp[key]) if x['end'] < 0), 0)
|
|
|
|
if not e:
|
|
|
|
continue
|
|
|
|
e['end'] = t.time
|
|
|
|
e['rdata'] = kprobedata
|
2016-12-14 18:37:05 +00:00
|
|
|
# end of kernel resume
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
if(phase != 'suspend_prepare' and kprobename in krescalls):
|
|
|
|
if phase in data.dmesg:
|
|
|
|
data.dmesg[phase]['end'] = t.time
|
2016-12-14 18:37:05 +00:00
|
|
|
data.tKernRes = t.time
|
|
|
|
|
2014-08-08 16:11:59 +00:00
|
|
|
# callgraph processing
|
|
|
|
elif sysvals.usecallgraph:
|
2014-01-17 00:18:22 +00:00
|
|
|
# create a callgraph object for the data
|
2016-07-15 21:34:14 +00:00
|
|
|
key = (m_proc, pid)
|
|
|
|
if(key not in testrun.ftemp):
|
|
|
|
testrun.ftemp[key] = []
|
2018-01-30 08:17:20 +00:00
|
|
|
testrun.ftemp[key].append(FTraceCallGraph(pid, sysvals))
|
2014-01-17 00:18:22 +00:00
|
|
|
# when the call is finished, see which device matches it
|
2016-07-15 21:34:14 +00:00
|
|
|
cg = testrun.ftemp[key][-1]
|
2018-01-30 08:17:20 +00:00
|
|
|
res = cg.addLine(t)
|
|
|
|
if(res != 0):
|
|
|
|
testrun.ftemp[key].append(FTraceCallGraph(pid, sysvals))
|
|
|
|
if(res == -1):
|
|
|
|
testrun.ftemp[key][-1].addLine(t)
|
2014-08-08 16:11:59 +00:00
|
|
|
tf.close()
|
2019-05-14 17:53:58 +00:00
|
|
|
if len(testdata) < 1:
|
|
|
|
sysvals.vprint('WARNING: ftrace start marker is missing')
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
if data and not data.devicegroups:
|
2019-05-14 17:53:58 +00:00
|
|
|
sysvals.vprint('WARNING: ftrace end marker is missing')
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
data.handleEndMarker(t.time, t.name)
|
2014-08-08 16:11:59 +00:00
|
|
|
|
2016-07-15 21:34:14 +00:00
|
|
|
if sysvals.suspendmode == 'command':
|
|
|
|
for test in testruns:
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
for p in test.data.sortedPhases():
|
2016-12-14 18:37:06 +00:00
|
|
|
if p == 'suspend_prepare':
|
2016-07-15 21:34:14 +00:00
|
|
|
test.data.dmesg[p]['start'] = test.data.start
|
|
|
|
test.data.dmesg[p]['end'] = test.data.end
|
|
|
|
else:
|
2016-12-14 18:37:06 +00:00
|
|
|
test.data.dmesg[p]['start'] = test.data.end
|
|
|
|
test.data.dmesg[p]['end'] = test.data.end
|
|
|
|
test.data.tSuspended = test.data.end
|
|
|
|
test.data.tResumed = test.data.end
|
2016-07-15 21:34:14 +00:00
|
|
|
test.data.fwValid = False
|
|
|
|
|
2016-12-14 18:37:05 +00:00
|
|
|
# dev source and procmon events can be unreadable with mixed phase height
|
|
|
|
if sysvals.usedevsrc or sysvals.useprocmon:
|
|
|
|
sysvals.mixedphaseheight = False
|
|
|
|
|
2018-10-08 22:56:32 +00:00
|
|
|
# expand phase boundaries so there are no gaps
|
|
|
|
for data in testdata:
|
|
|
|
lp = data.sortedPhases()[0]
|
|
|
|
for p in data.sortedPhases():
|
|
|
|
if(p != lp and not ('machine' in p and 'machine' in lp)):
|
|
|
|
data.dmesg[lp]['end'] = data.dmesg[p]['start']
|
|
|
|
lp = p
|
|
|
|
|
2016-12-14 18:37:06 +00:00
|
|
|
for i in range(len(testruns)):
|
|
|
|
test = testruns[i]
|
|
|
|
data = test.data
|
|
|
|
# find the total time range for this test (begin, end)
|
|
|
|
tlb, tle = data.start, data.end
|
|
|
|
if i < len(testruns) - 1:
|
|
|
|
tle = testruns[i+1].data.start
|
2016-12-14 18:37:05 +00:00
|
|
|
# add the process usage data to the timeline
|
|
|
|
if sysvals.useprocmon:
|
2016-12-14 18:37:06 +00:00
|
|
|
data.createProcessUsageEvents()
|
2014-08-08 16:11:59 +00:00
|
|
|
# add the traceevent data to the device hierarchy
|
|
|
|
if(sysvals.usetraceevents):
|
2016-07-15 21:34:14 +00:00
|
|
|
# add actual trace funcs
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
for name in sorted(test.ttemp):
|
2014-08-08 16:11:59 +00:00
|
|
|
for event in test.ttemp[name]:
|
2020-07-21 01:02:49 +00:00
|
|
|
if event['end'] - event['begin'] <= 0:
|
|
|
|
continue
|
|
|
|
title = name
|
|
|
|
if name == 'machine_suspend' and 'loop' in event:
|
|
|
|
title = 's2idle_enter_%dx' % event['loop']
|
|
|
|
data.newActionGlobal(title, event['begin'], event['end'], event['pid'])
|
2016-07-15 21:34:14 +00:00
|
|
|
# add the kprobe based virtual tracefuncs as actual devices
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
for key in sorted(tp.ktemp):
|
2016-07-15 21:34:14 +00:00
|
|
|
name, pid = key
|
|
|
|
if name not in sysvals.tracefuncs:
|
2014-08-08 16:11:59 +00:00
|
|
|
continue
|
2019-05-14 17:53:58 +00:00
|
|
|
if pid not in data.devpids:
|
|
|
|
data.devpids.append(pid)
|
2016-07-15 21:34:14 +00:00
|
|
|
for e in tp.ktemp[key]:
|
|
|
|
kb, ke = e['begin'], e['end']
|
2019-05-14 17:53:58 +00:00
|
|
|
if ke - kb < 0.000001 or tlb > kb or tle <= kb:
|
2016-07-15 21:34:14 +00:00
|
|
|
continue
|
2016-12-14 18:37:06 +00:00
|
|
|
color = sysvals.kprobeColor(name)
|
|
|
|
data.newActionGlobal(e['name'], kb, ke, pid, color)
|
2016-07-15 21:34:14 +00:00
|
|
|
# add config base kprobes and dev kprobes
|
2016-12-14 18:37:06 +00:00
|
|
|
if sysvals.usedevsrc:
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
for key in sorted(tp.ktemp):
|
2016-12-14 18:37:06 +00:00
|
|
|
name, pid = key
|
|
|
|
if name in sysvals.tracefuncs or name not in sysvals.dev_tracefuncs:
|
2016-07-15 21:34:14 +00:00
|
|
|
continue
|
2016-12-14 18:37:06 +00:00
|
|
|
for e in tp.ktemp[key]:
|
|
|
|
kb, ke = e['begin'], e['end']
|
2019-05-14 17:53:58 +00:00
|
|
|
if ke - kb < 0.000001 or tlb > kb or tle <= kb:
|
2016-12-14 18:37:06 +00:00
|
|
|
continue
|
|
|
|
data.addDeviceFunctionCall(e['name'], name, e['proc'], pid, kb,
|
2016-07-15 21:34:14 +00:00
|
|
|
ke, e['cdata'], e['rdata'])
|
|
|
|
if sysvals.usecallgraph:
|
|
|
|
# add the callgraph data to the device hierarchy
|
|
|
|
sortlist = dict()
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
for key in sorted(test.ftemp):
|
2016-07-15 21:34:14 +00:00
|
|
|
proc, pid = key
|
|
|
|
for cg in test.ftemp[key]:
|
2018-01-30 08:17:20 +00:00
|
|
|
if len(cg.list) < 1 or cg.invalid or (cg.end - cg.start == 0):
|
2016-07-15 21:34:14 +00:00
|
|
|
continue
|
|
|
|
if(not cg.postProcess()):
|
|
|
|
id = 'task %s' % (pid)
|
2018-01-30 08:17:20 +00:00
|
|
|
sysvals.vprint('Sanity check failed for '+\
|
2016-07-15 21:34:14 +00:00
|
|
|
id+', ignoring this callback')
|
|
|
|
continue
|
|
|
|
# match cg data to devices
|
2018-01-30 08:17:20 +00:00
|
|
|
devname = ''
|
|
|
|
if sysvals.suspendmode != 'command':
|
|
|
|
devname = cg.deviceMatch(pid, data)
|
|
|
|
if not devname:
|
2016-07-15 21:34:14 +00:00
|
|
|
sortkey = '%f%f%d' % (cg.start, cg.end, pid)
|
|
|
|
sortlist[sortkey] = cg
|
2019-05-14 17:53:58 +00:00
|
|
|
elif len(cg.list) > 1000000 and cg.name != sysvals.ftopfunc:
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
sysvals.vprint('WARNING: the callgraph for %s is massive (%d lines)' %\
|
|
|
|
(devname, len(cg.list)))
|
2016-07-15 21:34:14 +00:00
|
|
|
# create blocks for orphan cg data
|
|
|
|
for sortkey in sorted(sortlist):
|
|
|
|
cg = sortlist[sortkey]
|
2017-04-07 18:05:35 +00:00
|
|
|
name = cg.name
|
2016-07-15 21:34:14 +00:00
|
|
|
if sysvals.isCallgraphFunc(name):
|
2018-01-30 08:17:20 +00:00
|
|
|
sysvals.vprint('Callgraph found for task %d: %.3fms, %s' % (cg.pid, (cg.end - cg.start)*1000, name))
|
2016-12-14 18:37:06 +00:00
|
|
|
cg.newActionFromFunction(data)
|
2016-07-15 21:34:14 +00:00
|
|
|
if sysvals.suspendmode == 'command':
|
2018-05-24 16:36:28 +00:00
|
|
|
return (testdata, '')
|
2014-01-17 00:18:22 +00:00
|
|
|
|
2014-08-08 16:11:59 +00:00
|
|
|
# fill in any missing phases
|
2018-05-24 16:36:28 +00:00
|
|
|
error = []
|
2014-08-08 16:11:59 +00:00
|
|
|
for data in testdata:
|
2018-05-24 16:36:28 +00:00
|
|
|
tn = '' if len(testdata) == 1 else ('%d' % (data.testnumber + 1))
|
|
|
|
terr = ''
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
phasedef = data.phasedef
|
|
|
|
lp = 'suspend_prepare'
|
|
|
|
for p in sorted(phasedef, key=lambda k:phasedef[k]['order']):
|
|
|
|
if p not in data.dmesg:
|
2018-05-24 16:36:28 +00:00
|
|
|
if not terr:
|
2020-07-21 01:02:49 +00:00
|
|
|
ph = p if 'machine' in p else lp
|
|
|
|
terr = '%s%s failed in %s phase' % (sysvals.suspendmode, tn, ph)
|
|
|
|
pprint('TEST%s FAILED: %s' % (tn, terr))
|
2018-05-24 16:36:28 +00:00
|
|
|
error.append(terr)
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
if data.tSuspended == 0:
|
|
|
|
data.tSuspended = data.dmesg[lp]['end']
|
|
|
|
if data.tResumed == 0:
|
|
|
|
data.tResumed = data.dmesg[lp]['end']
|
|
|
|
data.fwValid = False
|
2018-01-30 08:17:20 +00:00
|
|
|
sysvals.vprint('WARNING: phase "%s" is missing!' % p)
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
lp = p
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
if not terr and 'dev' in data.wifi and data.wifi['stat'] == 'timeout':
|
|
|
|
terr = '%s%s failed in wifi_resume <i>(%s %.0fs timeout)</i>' % \
|
|
|
|
(sysvals.suspendmode, tn, data.wifi['dev'], data.wifi['time'])
|
|
|
|
error.append(terr)
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
if not terr and data.enterfail:
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint('test%s FAILED: enter %s failed with %s' % (tn, sysvals.suspendmode, data.enterfail))
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
terr = 'test%s failed to enter %s mode' % (tn, sysvals.suspendmode)
|
|
|
|
error.append(terr)
|
|
|
|
if data.tSuspended == 0:
|
|
|
|
data.tSuspended = data.tKernRes
|
|
|
|
if data.tResumed == 0:
|
|
|
|
data.tResumed = data.tSuspended
|
2014-08-08 16:11:59 +00:00
|
|
|
|
|
|
|
if(len(sysvals.devicefilter) > 0):
|
|
|
|
data.deviceFilter(sysvals.devicefilter)
|
|
|
|
data.fixupInitcallsThatDidntReturn()
|
2016-12-14 18:37:05 +00:00
|
|
|
if sysvals.usedevsrc:
|
|
|
|
data.optimizeDevSrc()
|
2014-08-08 16:11:59 +00:00
|
|
|
|
2016-12-14 18:37:06 +00:00
|
|
|
# x2: merge any overlapping devices between test runs
|
2016-12-14 18:37:05 +00:00
|
|
|
if sysvals.usedevsrc and len(testdata) > 1:
|
|
|
|
tc = len(testdata)
|
|
|
|
for i in range(tc - 1):
|
|
|
|
devlist = testdata[i].overflowDevices()
|
|
|
|
for j in range(i + 1, tc):
|
|
|
|
testdata[j].mergeOverlapDevices(devlist)
|
2016-12-14 18:37:06 +00:00
|
|
|
testdata[0].stitchTouchingThreads(testdata[1:])
|
2018-05-24 16:36:28 +00:00
|
|
|
return (testdata, ', '.join(error))
|
2014-08-08 16:11:59 +00:00
|
|
|
|
|
|
|
# Function: loadKernelLog
|
2014-01-17 00:18:22 +00:00
|
|
|
# Description:
|
2014-08-08 16:11:59 +00:00
|
|
|
# [deprecated for kernel 3.15.0 or newer]
|
|
|
|
# load the dmesg file into memory and fix up any ordering issues
|
|
|
|
# The dmesg filename is taken from sysvals
|
|
|
|
# Output:
|
|
|
|
# An array of empty Data objects with only their dmesgtext attributes set
|
2018-01-30 08:17:20 +00:00
|
|
|
def loadKernelLog():
|
|
|
|
sysvals.vprint('Analyzing the dmesg data (%s)...' % \
|
|
|
|
os.path.basename(sysvals.dmesgfile))
|
2014-08-08 16:11:59 +00:00
|
|
|
if(os.path.exists(sysvals.dmesgfile) == False):
|
2016-12-14 18:37:07 +00:00
|
|
|
doError('%s does not exist' % sysvals.dmesgfile)
|
2014-08-08 16:11:59 +00:00
|
|
|
|
2016-07-15 21:34:14 +00:00
|
|
|
# there can be multiple test runs in a single file
|
|
|
|
tp = TestProps()
|
2016-12-14 18:37:07 +00:00
|
|
|
tp.stamp = datetime.now().strftime('# suspend-%m%d%y-%H%M%S localhost mem unknown')
|
2014-08-08 16:11:59 +00:00
|
|
|
testruns = []
|
|
|
|
data = 0
|
2018-01-30 08:17:20 +00:00
|
|
|
lf = sysvals.openlog(sysvals.dmesgfile, 'r')
|
2014-01-17 00:18:22 +00:00
|
|
|
for line in lf:
|
2014-08-08 16:11:59 +00:00
|
|
|
line = line.replace('\r\n', '')
|
|
|
|
idx = line.find('[')
|
|
|
|
if idx > 1:
|
|
|
|
line = line[idx:]
|
2020-07-21 01:02:49 +00:00
|
|
|
if tp.stampInfo(line, sysvals):
|
2014-08-08 16:11:59 +00:00
|
|
|
continue
|
|
|
|
m = re.match('[ \t]*(\[ *)(?P<ktime>[0-9\.]*)(\]) (?P<msg>.*)', line)
|
2016-07-15 21:34:14 +00:00
|
|
|
if(not m):
|
|
|
|
continue
|
|
|
|
msg = m.group("msg")
|
|
|
|
if(re.match('PM: Syncing filesystems.*', msg)):
|
|
|
|
if(data):
|
|
|
|
testruns.append(data)
|
|
|
|
data = Data(len(testruns))
|
2017-07-05 21:42:55 +00:00
|
|
|
tp.parseStamp(data, sysvals)
|
2016-07-15 21:34:14 +00:00
|
|
|
if(not data):
|
|
|
|
continue
|
2016-12-14 18:37:07 +00:00
|
|
|
m = re.match('.* *(?P<k>[0-9]\.[0-9]{2}\.[0-9]-.*) .*', msg)
|
|
|
|
if(m):
|
|
|
|
sysvals.stamp['kernel'] = m.group('k')
|
|
|
|
m = re.match('PM: Preparing system for (?P<m>.*) sleep', msg)
|
|
|
|
if(m):
|
|
|
|
sysvals.stamp['mode'] = sysvals.suspendmode = m.group('m')
|
2016-07-15 21:34:14 +00:00
|
|
|
data.dmesgtext.append(line)
|
2014-01-17 00:18:22 +00:00
|
|
|
lf.close()
|
2014-08-08 16:11:59 +00:00
|
|
|
|
2016-12-14 18:37:07 +00:00
|
|
|
if data:
|
|
|
|
testruns.append(data)
|
|
|
|
if len(testruns) < 1:
|
2019-05-14 17:53:58 +00:00
|
|
|
doError('dmesg log has no suspend/resume data: %s' \
|
2016-12-14 18:37:07 +00:00
|
|
|
% sysvals.dmesgfile)
|
2014-08-08 16:11:59 +00:00
|
|
|
|
|
|
|
# fix lines with same timestamp/function with the call and return swapped
|
|
|
|
for data in testruns:
|
|
|
|
last = ''
|
|
|
|
for line in data.dmesgtext:
|
|
|
|
mc = re.match('.*(\[ *)(?P<t>[0-9\.]*)(\]) calling '+\
|
|
|
|
'(?P<f>.*)\+ @ .*, parent: .*', line)
|
|
|
|
mr = re.match('.*(\[ *)(?P<t>[0-9\.]*)(\]) call '+\
|
|
|
|
'(?P<f>.*)\+ returned .* after (?P<dt>.*) usecs', last)
|
|
|
|
if(mc and mr and (mc.group('t') == mr.group('t')) and
|
|
|
|
(mc.group('f') == mr.group('f'))):
|
|
|
|
i = data.dmesgtext.index(last)
|
|
|
|
j = data.dmesgtext.index(line)
|
|
|
|
data.dmesgtext[i] = line
|
|
|
|
data.dmesgtext[j] = last
|
|
|
|
last = line
|
|
|
|
return testruns
|
|
|
|
|
|
|
|
# Function: parseKernelLog
|
2014-01-17 00:18:22 +00:00
|
|
|
# Description:
|
2014-08-08 16:11:59 +00:00
|
|
|
# [deprecated for kernel 3.15.0 or newer]
|
2014-01-17 00:18:22 +00:00
|
|
|
# Analyse a dmesg log output file generated from this app during
|
|
|
|
# the execution phase. Create a set of device structures in memory
|
|
|
|
# for subsequent formatting in the html output file
|
2014-08-08 16:11:59 +00:00
|
|
|
# This call is only for legacy support on kernels where the ftrace
|
|
|
|
# data lacks the suspend_resume or device_pm_callbacks trace events.
|
|
|
|
# Arguments:
|
|
|
|
# data: an empty Data object (with dmesgtext) obtained from loadKernelLog
|
|
|
|
# Output:
|
|
|
|
# The filled Data object
|
|
|
|
def parseKernelLog(data):
|
|
|
|
phase = 'suspend_runtime'
|
2014-01-17 00:18:22 +00:00
|
|
|
|
2014-08-08 16:11:59 +00:00
|
|
|
if(data.fwValid):
|
2018-01-30 08:17:20 +00:00
|
|
|
sysvals.vprint('Firmware Suspend = %u ns, Firmware Resume = %u ns' % \
|
2014-08-08 16:11:59 +00:00
|
|
|
(data.fwSuspend, data.fwResume))
|
2014-01-17 00:18:22 +00:00
|
|
|
|
2014-08-08 16:11:59 +00:00
|
|
|
# dmesg phase match table
|
2014-01-17 00:18:22 +00:00
|
|
|
dm = {
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
'suspend_prepare': ['PM: Syncing filesystems.*'],
|
|
|
|
'suspend': ['PM: Entering [a-z]* sleep.*', 'Suspending console.*'],
|
|
|
|
'suspend_late': ['PM: suspend of devices complete after.*'],
|
|
|
|
'suspend_noirq': ['PM: late suspend of devices complete after.*'],
|
|
|
|
'suspend_machine': ['PM: noirq suspend of devices complete after.*'],
|
|
|
|
'resume_machine': ['ACPI: Low-level resume complete.*'],
|
|
|
|
'resume_noirq': ['ACPI: Waking up from system sleep state.*'],
|
|
|
|
'resume_early': ['PM: noirq resume of devices complete after.*'],
|
|
|
|
'resume': ['PM: early resume of devices complete after.*'],
|
|
|
|
'resume_complete': ['PM: resume of devices complete after.*'],
|
|
|
|
'post_resume': ['.*Restarting tasks \.\.\..*'],
|
2014-01-17 00:18:22 +00:00
|
|
|
}
|
2014-08-08 16:11:59 +00:00
|
|
|
if(sysvals.suspendmode == 'standby'):
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
dm['resume_machine'] = ['PM: Restoring platform NVS memory']
|
2014-08-08 16:11:59 +00:00
|
|
|
elif(sysvals.suspendmode == 'disk'):
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
dm['suspend_late'] = ['PM: freeze of devices complete after.*']
|
|
|
|
dm['suspend_noirq'] = ['PM: late freeze of devices complete after.*']
|
|
|
|
dm['suspend_machine'] = ['PM: noirq freeze of devices complete after.*']
|
|
|
|
dm['resume_machine'] = ['PM: Restoring platform NVS memory']
|
|
|
|
dm['resume_early'] = ['PM: noirq restore of devices complete after.*']
|
|
|
|
dm['resume'] = ['PM: early restore of devices complete after.*']
|
|
|
|
dm['resume_complete'] = ['PM: restore of devices complete after.*']
|
2014-08-08 16:11:59 +00:00
|
|
|
elif(sysvals.suspendmode == 'freeze'):
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
dm['resume_machine'] = ['ACPI: resume from mwait']
|
2014-08-08 16:11:59 +00:00
|
|
|
|
|
|
|
# action table (expected events that occur and show up in dmesg)
|
|
|
|
at = {
|
|
|
|
'sync_filesystems': {
|
|
|
|
'smsg': 'PM: Syncing filesystems.*',
|
|
|
|
'emsg': 'PM: Preparing system for mem sleep.*' },
|
|
|
|
'freeze_user_processes': {
|
|
|
|
'smsg': 'Freezing user space processes .*',
|
|
|
|
'emsg': 'Freezing remaining freezable tasks.*' },
|
|
|
|
'freeze_tasks': {
|
|
|
|
'smsg': 'Freezing remaining freezable tasks.*',
|
|
|
|
'emsg': 'PM: Entering (?P<mode>[a-z,A-Z]*) sleep.*' },
|
|
|
|
'ACPI prepare': {
|
|
|
|
'smsg': 'ACPI: Preparing to enter system sleep state.*',
|
|
|
|
'emsg': 'PM: Saving platform NVS memory.*' },
|
|
|
|
'PM vns': {
|
|
|
|
'smsg': 'PM: Saving platform NVS memory.*',
|
|
|
|
'emsg': 'Disabling non-boot CPUs .*' },
|
|
|
|
}
|
|
|
|
|
|
|
|
t0 = -1.0
|
|
|
|
cpu_start = -1.0
|
|
|
|
prevktime = -1.0
|
|
|
|
actions = dict()
|
|
|
|
for line in data.dmesgtext:
|
2014-01-17 00:18:22 +00:00
|
|
|
# parse each dmesg line into the time and message
|
2014-08-08 16:11:59 +00:00
|
|
|
m = re.match('[ \t]*(\[ *)(?P<ktime>[0-9\.]*)(\]) (?P<msg>.*)', line)
|
2014-01-17 00:18:22 +00:00
|
|
|
if(m):
|
2014-08-08 16:11:59 +00:00
|
|
|
val = m.group('ktime')
|
|
|
|
try:
|
|
|
|
ktime = float(val)
|
|
|
|
except:
|
|
|
|
continue
|
|
|
|
msg = m.group('msg')
|
|
|
|
# initialize data start to first line time
|
|
|
|
if t0 < 0:
|
|
|
|
data.setStart(ktime)
|
|
|
|
t0 = ktime
|
2014-01-17 00:18:22 +00:00
|
|
|
else:
|
|
|
|
continue
|
|
|
|
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
# check for a phase change line
|
|
|
|
phasechange = False
|
|
|
|
for p in dm:
|
|
|
|
for s in dm[p]:
|
|
|
|
if(re.match(s, msg)):
|
|
|
|
phasechange, phase = True, p
|
|
|
|
break
|
|
|
|
|
2014-08-08 16:11:59 +00:00
|
|
|
# hack for determining resume_machine end for freeze
|
|
|
|
if(not sysvals.usetraceevents and sysvals.suspendmode == 'freeze' \
|
|
|
|
and phase == 'resume_machine' and \
|
|
|
|
re.match('calling (?P<f>.*)\+ @ .*, parent: .*', msg)):
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
data.setPhase(phase, ktime, False)
|
2014-08-08 16:11:59 +00:00
|
|
|
phase = 'resume_noirq'
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
data.setPhase(phase, ktime, True)
|
|
|
|
|
|
|
|
if phasechange:
|
|
|
|
if phase == 'suspend_prepare':
|
|
|
|
data.setPhase(phase, ktime, True)
|
|
|
|
data.setStart(ktime)
|
|
|
|
data.tKernSus = ktime
|
|
|
|
elif phase == 'suspend':
|
|
|
|
lp = data.lastPhase()
|
|
|
|
if lp:
|
|
|
|
data.setPhase(lp, ktime, False)
|
|
|
|
data.setPhase(phase, ktime, True)
|
|
|
|
elif phase == 'suspend_late':
|
|
|
|
lp = data.lastPhase()
|
|
|
|
if lp:
|
|
|
|
data.setPhase(lp, ktime, False)
|
|
|
|
data.setPhase(phase, ktime, True)
|
|
|
|
elif phase == 'suspend_noirq':
|
|
|
|
lp = data.lastPhase()
|
|
|
|
if lp:
|
|
|
|
data.setPhase(lp, ktime, False)
|
|
|
|
data.setPhase(phase, ktime, True)
|
|
|
|
elif phase == 'suspend_machine':
|
|
|
|
lp = data.lastPhase()
|
|
|
|
if lp:
|
|
|
|
data.setPhase(lp, ktime, False)
|
|
|
|
data.setPhase(phase, ktime, True)
|
|
|
|
elif phase == 'resume_machine':
|
|
|
|
lp = data.lastPhase()
|
|
|
|
if(sysvals.suspendmode in ['freeze', 'standby']):
|
|
|
|
data.tSuspended = prevktime
|
|
|
|
if lp:
|
|
|
|
data.setPhase(lp, prevktime, False)
|
|
|
|
else:
|
|
|
|
data.tSuspended = ktime
|
|
|
|
if lp:
|
|
|
|
data.setPhase(lp, prevktime, False)
|
|
|
|
data.tResumed = ktime
|
|
|
|
data.setPhase(phase, ktime, True)
|
|
|
|
elif phase == 'resume_noirq':
|
|
|
|
lp = data.lastPhase()
|
|
|
|
if lp:
|
|
|
|
data.setPhase(lp, ktime, False)
|
|
|
|
data.setPhase(phase, ktime, True)
|
|
|
|
elif phase == 'resume_early':
|
|
|
|
lp = data.lastPhase()
|
|
|
|
if lp:
|
|
|
|
data.setPhase(lp, ktime, False)
|
|
|
|
data.setPhase(phase, ktime, True)
|
|
|
|
elif phase == 'resume':
|
|
|
|
lp = data.lastPhase()
|
|
|
|
if lp:
|
|
|
|
data.setPhase(lp, ktime, False)
|
|
|
|
data.setPhase(phase, ktime, True)
|
|
|
|
elif phase == 'resume_complete':
|
|
|
|
lp = data.lastPhase()
|
|
|
|
if lp:
|
|
|
|
data.setPhase(lp, ktime, False)
|
|
|
|
data.setPhase(phase, ktime, True)
|
|
|
|
elif phase == 'post_resume':
|
|
|
|
lp = data.lastPhase()
|
|
|
|
if lp:
|
|
|
|
data.setPhase(lp, ktime, False)
|
|
|
|
data.setEnd(ktime)
|
|
|
|
data.tKernRes = ktime
|
|
|
|
break
|
2014-01-17 00:18:22 +00:00
|
|
|
|
|
|
|
# -- device callbacks --
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
if(phase in data.sortedPhases()):
|
2014-01-17 00:18:22 +00:00
|
|
|
# device init call
|
2014-08-08 16:11:59 +00:00
|
|
|
if(re.match('calling (?P<f>.*)\+ @ .*, parent: .*', msg)):
|
|
|
|
sm = re.match('calling (?P<f>.*)\+ @ '+\
|
|
|
|
'(?P<n>.*), parent: (?P<p>.*)', msg);
|
|
|
|
f = sm.group('f')
|
|
|
|
n = sm.group('n')
|
|
|
|
p = sm.group('p')
|
2014-01-17 00:18:22 +00:00
|
|
|
if(f and n and p):
|
2014-08-08 16:11:59 +00:00
|
|
|
data.newAction(phase, f, int(n), p, ktime, -1, '')
|
2014-01-17 00:18:22 +00:00
|
|
|
# device init return
|
2014-08-08 16:11:59 +00:00
|
|
|
elif(re.match('call (?P<f>.*)\+ returned .* after '+\
|
|
|
|
'(?P<t>.*) usecs', msg)):
|
|
|
|
sm = re.match('call (?P<f>.*)\+ returned .* after '+\
|
|
|
|
'(?P<t>.*) usecs(?P<a>.*)', msg);
|
|
|
|
f = sm.group('f')
|
|
|
|
t = sm.group('t')
|
2014-01-17 00:18:22 +00:00
|
|
|
list = data.dmesg[phase]['list']
|
|
|
|
if(f in list):
|
|
|
|
dev = list[f]
|
|
|
|
dev['length'] = int(t)
|
|
|
|
dev['end'] = ktime
|
2014-08-08 16:11:59 +00:00
|
|
|
|
|
|
|
# if trace events are not available, these are better than nothing
|
|
|
|
if(not sysvals.usetraceevents):
|
|
|
|
# look for known actions
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
for a in sorted(at):
|
2014-08-08 16:11:59 +00:00
|
|
|
if(re.match(at[a]['smsg'], msg)):
|
|
|
|
if(a not in actions):
|
|
|
|
actions[a] = []
|
|
|
|
actions[a].append({'begin': ktime, 'end': ktime})
|
|
|
|
if(re.match(at[a]['emsg'], msg)):
|
2016-07-15 21:34:14 +00:00
|
|
|
if(a in actions):
|
|
|
|
actions[a][-1]['end'] = ktime
|
2014-08-08 16:11:59 +00:00
|
|
|
# now look for CPU on/off events
|
|
|
|
if(re.match('Disabling non-boot CPUs .*', msg)):
|
|
|
|
# start of first cpu suspend
|
|
|
|
cpu_start = ktime
|
|
|
|
elif(re.match('Enabling non-boot CPUs .*', msg)):
|
|
|
|
# start of first cpu resume
|
|
|
|
cpu_start = ktime
|
|
|
|
elif(re.match('smpboot: CPU (?P<cpu>[0-9]*) is now offline', msg)):
|
|
|
|
# end of a cpu suspend, start of the next
|
|
|
|
m = re.match('smpboot: CPU (?P<cpu>[0-9]*) is now offline', msg)
|
|
|
|
cpu = 'CPU'+m.group('cpu')
|
|
|
|
if(cpu not in actions):
|
|
|
|
actions[cpu] = []
|
|
|
|
actions[cpu].append({'begin': cpu_start, 'end': ktime})
|
|
|
|
cpu_start = ktime
|
|
|
|
elif(re.match('CPU(?P<cpu>[0-9]*) is up', msg)):
|
|
|
|
# end of a cpu resume, start of the next
|
|
|
|
m = re.match('CPU(?P<cpu>[0-9]*) is up', msg)
|
|
|
|
cpu = 'CPU'+m.group('cpu')
|
|
|
|
if(cpu not in actions):
|
|
|
|
actions[cpu] = []
|
|
|
|
actions[cpu].append({'begin': cpu_start, 'end': ktime})
|
|
|
|
cpu_start = ktime
|
|
|
|
prevktime = ktime
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
data.initDevicegroups()
|
2014-01-17 00:18:22 +00:00
|
|
|
|
|
|
|
# fill in any missing phases
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
phasedef = data.phasedef
|
|
|
|
terr, lp = '', 'suspend_prepare'
|
|
|
|
for p in sorted(phasedef, key=lambda k:phasedef[k]['order']):
|
|
|
|
if p not in data.dmesg:
|
|
|
|
if not terr:
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint('TEST FAILED: %s failed in %s phase' % (sysvals.suspendmode, lp))
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
terr = '%s failed in %s phase' % (sysvals.suspendmode, lp)
|
|
|
|
if data.tSuspended == 0:
|
|
|
|
data.tSuspended = data.dmesg[lp]['end']
|
|
|
|
if data.tResumed == 0:
|
|
|
|
data.tResumed = data.dmesg[lp]['end']
|
|
|
|
sysvals.vprint('WARNING: phase "%s" is missing!' % p)
|
|
|
|
lp = p
|
|
|
|
lp = data.sortedPhases()[0]
|
|
|
|
for p in data.sortedPhases():
|
|
|
|
if(p != lp and not ('machine' in p and 'machine' in lp)):
|
|
|
|
data.dmesg[lp]['end'] = data.dmesg[p]['start']
|
2014-01-17 00:18:22 +00:00
|
|
|
lp = p
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
if data.tSuspended == 0:
|
|
|
|
data.tSuspended = data.tKernRes
|
|
|
|
if data.tResumed == 0:
|
|
|
|
data.tResumed = data.tSuspended
|
2014-01-17 00:18:22 +00:00
|
|
|
|
2014-08-08 16:11:59 +00:00
|
|
|
# fill in any actions we've found
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
for name in sorted(actions):
|
2014-08-08 16:11:59 +00:00
|
|
|
for event in actions[name]:
|
2016-07-15 21:34:14 +00:00
|
|
|
data.newActionGlobal(name, event['begin'], event['end'])
|
2014-08-08 16:11:59 +00:00
|
|
|
|
|
|
|
if(len(sysvals.devicefilter) > 0):
|
|
|
|
data.deviceFilter(sysvals.devicefilter)
|
2014-01-17 00:18:22 +00:00
|
|
|
data.fixupInitcallsThatDidntReturn()
|
|
|
|
return True
|
|
|
|
|
2017-04-07 18:05:35 +00:00
|
|
|
def callgraphHTML(sv, hf, num, cg, title, color, devid):
|
|
|
|
html_func_top = '<article id="{0}" class="atop" style="background:{1}">\n<input type="checkbox" class="pf" id="f{2}" checked/><label for="f{2}">{3} {4}</label>\n'
|
|
|
|
html_func_start = '<article>\n<input type="checkbox" class="pf" id="f{0}" checked/><label for="f{0}">{1} {2}</label>\n'
|
|
|
|
html_func_end = '</article>\n'
|
|
|
|
html_func_leaf = '<article>{0} {1}</article>\n'
|
|
|
|
|
|
|
|
cgid = devid
|
|
|
|
if cg.id:
|
|
|
|
cgid += cg.id
|
|
|
|
cglen = (cg.end - cg.start) * 1000
|
|
|
|
if cglen < sv.mincglen:
|
|
|
|
return num
|
|
|
|
|
|
|
|
fmt = '<r>(%.3f ms @ '+sv.timeformat+' to '+sv.timeformat+')</r>'
|
|
|
|
flen = fmt % (cglen, cg.start, cg.end)
|
|
|
|
hf.write(html_func_top.format(cgid, color, num, title, flen))
|
|
|
|
num += 1
|
|
|
|
for line in cg.list:
|
|
|
|
if(line.length < 0.000000001):
|
|
|
|
flen = ''
|
|
|
|
else:
|
|
|
|
fmt = '<n>(%.3f ms @ '+sv.timeformat+')</n>'
|
|
|
|
flen = fmt % (line.length*1000, line.time)
|
2018-01-30 08:17:20 +00:00
|
|
|
if line.isLeaf():
|
2017-04-07 18:05:35 +00:00
|
|
|
hf.write(html_func_leaf.format(line.name, flen))
|
2018-01-30 08:17:20 +00:00
|
|
|
elif line.freturn:
|
2017-04-07 18:05:35 +00:00
|
|
|
hf.write(html_func_end)
|
|
|
|
else:
|
|
|
|
hf.write(html_func_start.format(num, line.name, flen))
|
|
|
|
num += 1
|
|
|
|
hf.write(html_func_end)
|
|
|
|
return num
|
|
|
|
|
|
|
|
def addCallgraphs(sv, hf, data):
|
|
|
|
hf.write('<section id="callgraphs" class="callgraph">\n')
|
|
|
|
# write out the ftrace data converted to html
|
|
|
|
num = 0
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
for p in data.sortedPhases():
|
2017-04-07 18:05:35 +00:00
|
|
|
if sv.cgphase and p != sv.cgphase:
|
|
|
|
continue
|
|
|
|
list = data.dmesg[p]['list']
|
2020-07-21 01:02:49 +00:00
|
|
|
for d in data.sortedDevices(p):
|
|
|
|
if len(sv.cgfilter) > 0 and d not in sv.cgfilter:
|
2017-07-05 21:42:55 +00:00
|
|
|
continue
|
2020-07-21 01:02:49 +00:00
|
|
|
dev = list[d]
|
2017-04-07 18:05:35 +00:00
|
|
|
color = 'white'
|
|
|
|
if 'color' in data.dmesg[p]:
|
|
|
|
color = data.dmesg[p]['color']
|
|
|
|
if 'color' in dev:
|
|
|
|
color = dev['color']
|
2020-07-21 01:02:49 +00:00
|
|
|
name = d if '[' not in d else d.split('[')[0]
|
|
|
|
if(d in sv.devprops):
|
|
|
|
name = sv.devprops[d].altName(d)
|
|
|
|
if 'drv' in dev and dev['drv']:
|
|
|
|
name += ' {%s}' % dev['drv']
|
2017-04-07 18:05:35 +00:00
|
|
|
if sv.suspendmode in suspendmodename:
|
|
|
|
name += ' '+p
|
|
|
|
if('ftrace' in dev):
|
|
|
|
cg = dev['ftrace']
|
2019-05-14 17:53:58 +00:00
|
|
|
if cg.name == sv.ftopfunc:
|
|
|
|
name = 'top level suspend/resume call'
|
2017-04-07 18:05:35 +00:00
|
|
|
num = callgraphHTML(sv, hf, num, cg,
|
|
|
|
name, color, dev['id'])
|
|
|
|
if('ftraces' in dev):
|
|
|
|
for cg in dev['ftraces']:
|
|
|
|
num = callgraphHTML(sv, hf, num, cg,
|
|
|
|
name+' → '+cg.name, color, dev['id'])
|
|
|
|
hf.write('\n\n </section>\n')
|
|
|
|
|
2019-05-14 17:53:57 +00:00
|
|
|
def summaryCSS(title, center=True):
|
|
|
|
tdcenter = 'text-align:center;' if center else ''
|
|
|
|
out = '<!DOCTYPE html>\n<html>\n<head>\n\
|
2014-08-08 16:11:59 +00:00
|
|
|
<meta http-equiv="content-type" content="text/html; charset=UTF-8">\n\
|
2019-05-14 17:53:57 +00:00
|
|
|
<title>'+title+'</title>\n\
|
2014-08-08 16:11:59 +00:00
|
|
|
<style type=\'text/css\'>\n\
|
2017-04-07 18:05:35 +00:00
|
|
|
.stamp {width: 100%;text-align:center;background:#888;line-height:30px;color:white;font: 25px Arial;}\n\
|
2019-05-14 17:53:57 +00:00
|
|
|
table {width:100%;border-collapse: collapse;border:1px solid;}\n\
|
2017-04-07 18:05:35 +00:00
|
|
|
th {border: 1px solid black;background:#222;color:white;}\n\
|
2019-05-14 17:53:57 +00:00
|
|
|
td {font: 14px "Times New Roman";'+tdcenter+'}\n\
|
2018-05-24 16:36:28 +00:00
|
|
|
tr.head td {border: 1px solid black;background:#aaa;}\n\
|
|
|
|
tr.alt {background-color:#ddd;}\n\
|
|
|
|
tr.notice {color:red;}\n\
|
|
|
|
.minval {background-color:#BBFFBB;}\n\
|
|
|
|
.medval {background-color:#BBBBFF;}\n\
|
|
|
|
.maxval {background-color:#FFBBBB;}\n\
|
|
|
|
.head a {color:#000;text-decoration: none;}\n\
|
2014-08-08 16:11:59 +00:00
|
|
|
</style>\n</head>\n<body>\n'
|
2019-05-14 17:53:57 +00:00
|
|
|
return out
|
|
|
|
|
|
|
|
# Function: createHTMLSummarySimple
|
|
|
|
# Description:
|
|
|
|
# Create summary html file for a series of tests
|
|
|
|
# Arguments:
|
|
|
|
# testruns: array of Data objects from parseTraceLog
|
|
|
|
def createHTMLSummarySimple(testruns, htmlfile, title):
|
|
|
|
# write the html header first (html head, css code, up to body start)
|
|
|
|
html = summaryCSS('Summary - SleepGraph')
|
2014-08-08 16:11:59 +00:00
|
|
|
|
2018-05-24 16:36:28 +00:00
|
|
|
# extract the test data into list
|
|
|
|
list = dict()
|
2019-05-14 17:53:58 +00:00
|
|
|
tAvg, tMin, tMax, tMed = [0.0, 0.0], [0.0, 0.0], [0.0, 0.0], [dict(), dict()]
|
2018-05-24 16:36:28 +00:00
|
|
|
iMin, iMed, iMax = [0, 0], [0, 0], [0, 0]
|
|
|
|
num = 0
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
useturbo = usewifi = False
|
2018-05-24 16:36:28 +00:00
|
|
|
lastmode = ''
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
cnt = dict()
|
2018-05-24 16:36:28 +00:00
|
|
|
for data in sorted(testruns, key=lambda v:(v['mode'], v['host'], v['kernel'], v['time'])):
|
|
|
|
mode = data['mode']
|
|
|
|
if mode not in list:
|
|
|
|
list[mode] = {'data': [], 'avg': [0,0], 'min': [0,0], 'max': [0,0], 'med': [0,0]}
|
|
|
|
if lastmode and lastmode != mode and num > 0:
|
|
|
|
for i in range(2):
|
|
|
|
s = sorted(tMed[i])
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
list[lastmode]['med'][i] = s[int(len(s)//2)]
|
2019-05-14 17:53:58 +00:00
|
|
|
iMed[i] = tMed[i][list[lastmode]['med'][i]]
|
2018-05-24 16:36:28 +00:00
|
|
|
list[lastmode]['avg'] = [tAvg[0] / num, tAvg[1] / num]
|
|
|
|
list[lastmode]['min'] = tMin
|
|
|
|
list[lastmode]['max'] = tMax
|
|
|
|
list[lastmode]['idx'] = (iMin, iMed, iMax)
|
2019-05-14 17:53:58 +00:00
|
|
|
tAvg, tMin, tMax, tMed = [0.0, 0.0], [0.0, 0.0], [0.0, 0.0], [dict(), dict()]
|
2018-05-24 16:36:28 +00:00
|
|
|
iMin, iMed, iMax = [0, 0], [0, 0], [0, 0]
|
|
|
|
num = 0
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
pkgpc10 = syslpi = wifi = ''
|
2019-05-14 17:53:58 +00:00
|
|
|
if 'pkgpc10' in data and 'syslpi' in data:
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
pkgpc10, syslpi, useturbo = data['pkgpc10'], data['syslpi'], True
|
|
|
|
if 'wifi' in data:
|
|
|
|
wifi, usewifi = data['wifi'], True
|
2019-05-14 17:53:57 +00:00
|
|
|
res = data['result']
|
2018-05-24 16:36:28 +00:00
|
|
|
tVal = [float(data['suspend']), float(data['resume'])]
|
|
|
|
list[mode]['data'].append([data['host'], data['kernel'],
|
2019-05-14 17:53:57 +00:00
|
|
|
data['time'], tVal[0], tVal[1], data['url'], res,
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
data['issues'], data['sus_worst'], data['sus_worsttime'],
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
data['res_worst'], data['res_worsttime'], pkgpc10, syslpi, wifi])
|
2018-05-24 16:36:28 +00:00
|
|
|
idx = len(list[mode]['data']) - 1
|
2019-05-14 17:53:57 +00:00
|
|
|
if res.startswith('fail in'):
|
|
|
|
res = 'fail'
|
|
|
|
if res not in cnt:
|
|
|
|
cnt[res] = 1
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
else:
|
2019-05-14 17:53:57 +00:00
|
|
|
cnt[res] += 1
|
|
|
|
if res == 'pass':
|
2018-05-24 16:36:28 +00:00
|
|
|
for i in range(2):
|
2019-05-14 17:53:58 +00:00
|
|
|
tMed[i][tVal[i]] = idx
|
2018-05-24 16:36:28 +00:00
|
|
|
tAvg[i] += tVal[i]
|
|
|
|
if tMin[i] == 0 or tVal[i] < tMin[i]:
|
|
|
|
iMin[i] = idx
|
|
|
|
tMin[i] = tVal[i]
|
|
|
|
if tMax[i] == 0 or tVal[i] > tMax[i]:
|
|
|
|
iMax[i] = idx
|
|
|
|
tMax[i] = tVal[i]
|
|
|
|
num += 1
|
|
|
|
lastmode = mode
|
|
|
|
if lastmode and num > 0:
|
|
|
|
for i in range(2):
|
|
|
|
s = sorted(tMed[i])
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
list[lastmode]['med'][i] = s[int(len(s)//2)]
|
2019-05-14 17:53:58 +00:00
|
|
|
iMed[i] = tMed[i][list[lastmode]['med'][i]]
|
2018-05-24 16:36:28 +00:00
|
|
|
list[lastmode]['avg'] = [tAvg[0] / num, tAvg[1] / num]
|
|
|
|
list[lastmode]['min'] = tMin
|
|
|
|
list[lastmode]['max'] = tMax
|
|
|
|
list[lastmode]['idx'] = (iMin, iMed, iMax)
|
|
|
|
|
2014-08-08 16:11:59 +00:00
|
|
|
# group test header
|
2018-05-24 16:36:28 +00:00
|
|
|
desc = []
|
|
|
|
for ilk in sorted(cnt, reverse=True):
|
|
|
|
if cnt[ilk] > 0:
|
|
|
|
desc.append('%d %s' % (cnt[ilk], ilk))
|
2018-10-08 22:56:32 +00:00
|
|
|
html += '<div class="stamp">%s (%d tests: %s)</div>\n' % (title, len(testruns), ', '.join(desc))
|
2014-08-08 16:11:59 +00:00
|
|
|
th = '\t<th>{0}</th>\n'
|
|
|
|
td = '\t<td>{0}</td>\n'
|
2018-05-24 16:36:28 +00:00
|
|
|
tdh = '\t<td{1}>{0}</td>\n'
|
2017-04-07 18:05:35 +00:00
|
|
|
tdlink = '\t<td><a href="{0}">html</a></td>\n'
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
cols = 12
|
|
|
|
if useturbo:
|
|
|
|
cols += 2
|
|
|
|
if usewifi:
|
|
|
|
cols += 1
|
|
|
|
colspan = '%d' % cols
|
2014-08-08 16:11:59 +00:00
|
|
|
|
|
|
|
# table header
|
2019-05-14 17:53:57 +00:00
|
|
|
html += '<table>\n<tr>\n' + th.format('#') +\
|
2017-04-07 18:05:35 +00:00
|
|
|
th.format('Mode') + th.format('Host') + th.format('Kernel') +\
|
2018-05-24 16:36:28 +00:00
|
|
|
th.format('Test Time') + th.format('Result') + th.format('Issues') +\
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
th.format('Suspend') + th.format('Resume') +\
|
|
|
|
th.format('Worst Suspend Device') + th.format('SD Time') +\
|
2019-05-14 17:53:58 +00:00
|
|
|
th.format('Worst Resume Device') + th.format('RD Time')
|
|
|
|
if useturbo:
|
|
|
|
html += th.format('PkgPC10') + th.format('SysLPI')
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
if usewifi:
|
|
|
|
html += th.format('Wifi')
|
2019-05-14 17:53:58 +00:00
|
|
|
html += th.format('Detail')+'</tr>\n'
|
2018-05-24 16:36:28 +00:00
|
|
|
# export list into html
|
|
|
|
head = '<tr class="head"><td>{0}</td><td>{1}</td>'+\
|
2019-05-14 17:53:58 +00:00
|
|
|
'<td colspan='+colspan+' class="sus">Suspend Avg={2} '+\
|
2018-05-24 16:36:28 +00:00
|
|
|
'<span class=minval><a href="#s{10}min">Min={3}</a></span> '+\
|
|
|
|
'<span class=medval><a href="#s{10}med">Med={4}</a></span> '+\
|
|
|
|
'<span class=maxval><a href="#s{10}max">Max={5}</a></span> '+\
|
|
|
|
'Resume Avg={6} '+\
|
|
|
|
'<span class=minval><a href="#r{10}min">Min={7}</a></span> '+\
|
|
|
|
'<span class=medval><a href="#r{10}med">Med={8}</a></span> '+\
|
|
|
|
'<span class=maxval><a href="#r{10}max">Max={9}</a></span></td>'+\
|
|
|
|
'</tr>\n'
|
2019-05-14 17:53:58 +00:00
|
|
|
headnone = '<tr class="head"><td>{0}</td><td>{1}</td><td colspan='+\
|
|
|
|
colspan+'></td></tr>\n'
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
for mode in sorted(list):
|
2018-05-24 16:36:28 +00:00
|
|
|
# header line for each suspend mode
|
|
|
|
num = 0
|
|
|
|
tAvg, tMin, tMax, tMed = list[mode]['avg'], list[mode]['min'],\
|
|
|
|
list[mode]['max'], list[mode]['med']
|
|
|
|
count = len(list[mode]['data'])
|
|
|
|
if 'idx' in list[mode]:
|
|
|
|
iMin, iMed, iMax = list[mode]['idx']
|
|
|
|
html += head.format('%d' % count, mode.upper(),
|
|
|
|
'%.3f' % tAvg[0], '%.3f' % tMin[0], '%.3f' % tMed[0], '%.3f' % tMax[0],
|
|
|
|
'%.3f' % tAvg[1], '%.3f' % tMin[1], '%.3f' % tMed[1], '%.3f' % tMax[1],
|
|
|
|
mode.lower()
|
|
|
|
)
|
2014-08-08 16:11:59 +00:00
|
|
|
else:
|
2018-05-24 16:36:28 +00:00
|
|
|
iMin = iMed = iMax = [-1, -1, -1]
|
|
|
|
html += headnone.format('%d' % count, mode.upper())
|
|
|
|
for d in list[mode]['data']:
|
|
|
|
# row classes - alternate row color
|
|
|
|
rcls = ['alt'] if num % 2 == 1 else []
|
|
|
|
if d[6] != 'pass':
|
|
|
|
rcls.append('notice')
|
|
|
|
html += '<tr class="'+(' '.join(rcls))+'">\n' if len(rcls) > 0 else '<tr>\n'
|
|
|
|
# figure out if the line has sus or res highlighted
|
|
|
|
idx = list[mode]['data'].index(d)
|
|
|
|
tHigh = ['', '']
|
|
|
|
for i in range(2):
|
|
|
|
tag = 's%s' % mode if i == 0 else 'r%s' % mode
|
|
|
|
if idx == iMin[i]:
|
|
|
|
tHigh[i] = ' id="%smin" class=minval title="Minimum"' % tag
|
|
|
|
elif idx == iMax[i]:
|
|
|
|
tHigh[i] = ' id="%smax" class=maxval title="Maximum"' % tag
|
|
|
|
elif idx == iMed[i]:
|
|
|
|
tHigh[i] = ' id="%smed" class=medval title="Median"' % tag
|
|
|
|
html += td.format("%d" % (list[mode]['data'].index(d) + 1)) # row
|
|
|
|
html += td.format(mode) # mode
|
|
|
|
html += td.format(d[0]) # host
|
|
|
|
html += td.format(d[1]) # kernel
|
|
|
|
html += td.format(d[2]) # time
|
|
|
|
html += td.format(d[6]) # result
|
|
|
|
html += td.format(d[7]) # issues
|
|
|
|
html += tdh.format('%.3f ms' % d[3], tHigh[0]) if d[3] else td.format('') # suspend
|
|
|
|
html += tdh.format('%.3f ms' % d[4], tHigh[1]) if d[4] else td.format('') # resume
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
html += td.format(d[8]) # sus_worst
|
|
|
|
html += td.format('%.3f ms' % d[9]) if d[9] else td.format('') # sus_worst time
|
|
|
|
html += td.format(d[10]) # res_worst
|
|
|
|
html += td.format('%.3f ms' % d[11]) if d[11] else td.format('') # res_worst time
|
2019-05-14 17:53:58 +00:00
|
|
|
if useturbo:
|
|
|
|
html += td.format(d[12]) # pkg_pc10
|
|
|
|
html += td.format(d[13]) # syslpi
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
if usewifi:
|
|
|
|
html += td.format(d[14]) # wifi
|
2018-05-24 16:36:28 +00:00
|
|
|
html += tdlink.format(d[5]) if d[5] else td.format('') # url
|
|
|
|
html += '</tr>\n'
|
|
|
|
num += 1
|
2014-08-08 16:11:59 +00:00
|
|
|
|
|
|
|
# flush the data to file
|
2017-04-07 18:05:35 +00:00
|
|
|
hf = open(htmlfile, 'w')
|
|
|
|
hf.write(html+'</table>\n</body>\n</html>\n')
|
2014-08-08 16:11:59 +00:00
|
|
|
hf.close()
|
|
|
|
|
2019-05-14 17:53:57 +00:00
|
|
|
def createHTMLDeviceSummary(testruns, htmlfile, title):
|
|
|
|
html = summaryCSS('Device Summary - SleepGraph', False)
|
|
|
|
|
|
|
|
# create global device list from all tests
|
|
|
|
devall = dict()
|
|
|
|
for data in testruns:
|
|
|
|
host, url, devlist = data['host'], data['url'], data['devlist']
|
|
|
|
for type in devlist:
|
|
|
|
if type not in devall:
|
|
|
|
devall[type] = dict()
|
|
|
|
mdevlist, devlist = devall[type], data['devlist'][type]
|
|
|
|
for name in devlist:
|
|
|
|
length = devlist[name]
|
|
|
|
if name not in mdevlist:
|
|
|
|
mdevlist[name] = {'name': name, 'host': host,
|
|
|
|
'worst': length, 'total': length, 'count': 1,
|
|
|
|
'url': url}
|
|
|
|
else:
|
|
|
|
if length > mdevlist[name]['worst']:
|
|
|
|
mdevlist[name]['worst'] = length
|
|
|
|
mdevlist[name]['url'] = url
|
|
|
|
mdevlist[name]['host'] = host
|
|
|
|
mdevlist[name]['total'] += length
|
|
|
|
mdevlist[name]['count'] += 1
|
|
|
|
|
|
|
|
# generate the html
|
|
|
|
th = '\t<th>{0}</th>\n'
|
|
|
|
td = '\t<td align=center>{0}</td>\n'
|
|
|
|
tdr = '\t<td align=right>{0}</td>\n'
|
|
|
|
tdlink = '\t<td align=center><a href="{0}">html</a></td>\n'
|
|
|
|
limit = 1
|
|
|
|
for type in sorted(devall, reverse=True):
|
|
|
|
num = 0
|
|
|
|
devlist = devall[type]
|
|
|
|
# table header
|
|
|
|
html += '<div class="stamp">%s (%s devices > %d ms)</div><table>\n' % \
|
|
|
|
(title, type.upper(), limit)
|
|
|
|
html += '<tr>\n' + '<th align=right>Device Name</th>' +\
|
|
|
|
th.format('Average Time') + th.format('Count') +\
|
|
|
|
th.format('Worst Time') + th.format('Host (worst time)') +\
|
|
|
|
th.format('Link (worst time)') + '</tr>\n'
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
for name in sorted(devlist, key=lambda k:(devlist[k]['worst'], \
|
|
|
|
devlist[k]['total'], devlist[k]['name']), reverse=True):
|
2019-05-14 17:53:57 +00:00
|
|
|
data = devall[type][name]
|
|
|
|
data['average'] = data['total'] / data['count']
|
|
|
|
if data['average'] < limit:
|
|
|
|
continue
|
|
|
|
# row classes - alternate row color
|
|
|
|
rcls = ['alt'] if num % 2 == 1 else []
|
|
|
|
html += '<tr class="'+(' '.join(rcls))+'">\n' if len(rcls) > 0 else '<tr>\n'
|
|
|
|
html += tdr.format(data['name']) # name
|
|
|
|
html += td.format('%.3f ms' % data['average']) # average
|
|
|
|
html += td.format(data['count']) # count
|
|
|
|
html += td.format('%.3f ms' % data['worst']) # worst
|
|
|
|
html += td.format(data['host']) # host
|
|
|
|
html += tdlink.format(data['url']) # url
|
|
|
|
html += '</tr>\n'
|
|
|
|
num += 1
|
|
|
|
html += '</table>\n'
|
|
|
|
|
|
|
|
# flush the data to file
|
|
|
|
hf = open(htmlfile, 'w')
|
|
|
|
hf.write(html+'</body>\n</html>\n')
|
|
|
|
hf.close()
|
|
|
|
return devall
|
|
|
|
|
2019-05-14 17:53:58 +00:00
|
|
|
def createHTMLIssuesSummary(testruns, issues, htmlfile, title, extra=''):
|
|
|
|
multihost = len([e for e in issues if len(e['urls']) > 1]) > 0
|
2019-05-14 17:53:57 +00:00
|
|
|
html = summaryCSS('Issues Summary - SleepGraph', False)
|
2019-05-14 17:53:58 +00:00
|
|
|
total = len(testruns)
|
2019-05-14 17:53:57 +00:00
|
|
|
|
|
|
|
# generate the html
|
|
|
|
th = '\t<th>{0}</th>\n'
|
|
|
|
td = '\t<td align={0}>{1}</td>\n'
|
|
|
|
tdlink = '<a href="{1}">{0}</a>'
|
|
|
|
subtitle = '%d issues' % len(issues) if len(issues) > 0 else 'no issues'
|
|
|
|
html += '<div class="stamp">%s (%s)</div><table>\n' % (title, subtitle)
|
2019-05-14 17:53:58 +00:00
|
|
|
html += '<tr>\n' + th.format('Issue') + th.format('Count')
|
|
|
|
if multihost:
|
|
|
|
html += th.format('Hosts')
|
|
|
|
html += th.format('Tests') + th.format('Fail Rate') +\
|
|
|
|
th.format('First Instance') + '</tr>\n'
|
2019-05-14 17:53:57 +00:00
|
|
|
|
|
|
|
num = 0
|
|
|
|
for e in sorted(issues, key=lambda v:v['count'], reverse=True):
|
2019-05-14 17:53:58 +00:00
|
|
|
testtotal = 0
|
2019-05-14 17:53:57 +00:00
|
|
|
links = []
|
|
|
|
for host in sorted(e['urls']):
|
2019-05-14 17:53:58 +00:00
|
|
|
links.append(tdlink.format(host, e['urls'][host][0]))
|
|
|
|
testtotal += len(e['urls'][host])
|
|
|
|
rate = '%d/%d (%.2f%%)' % (testtotal, total, 100*float(testtotal)/float(total))
|
2019-05-14 17:53:57 +00:00
|
|
|
# row classes - alternate row color
|
|
|
|
rcls = ['alt'] if num % 2 == 1 else []
|
|
|
|
html += '<tr class="'+(' '.join(rcls))+'">\n' if len(rcls) > 0 else '<tr>\n'
|
|
|
|
html += td.format('left', e['line']) # issue
|
2019-05-14 17:53:58 +00:00
|
|
|
html += td.format('center', e['count']) # count
|
|
|
|
if multihost:
|
|
|
|
html += td.format('center', len(e['urls'])) # hosts
|
|
|
|
html += td.format('center', testtotal) # test count
|
|
|
|
html += td.format('center', rate) # test rate
|
2019-05-14 17:53:57 +00:00
|
|
|
html += td.format('center nowrap', '<br>'.join(links)) # links
|
|
|
|
html += '</tr>\n'
|
|
|
|
num += 1
|
|
|
|
|
|
|
|
# flush the data to file
|
|
|
|
hf = open(htmlfile, 'w')
|
2019-05-14 17:53:58 +00:00
|
|
|
hf.write(html+'</table>\n'+extra+'</body>\n</html>\n')
|
2019-05-14 17:53:57 +00:00
|
|
|
hf.close()
|
|
|
|
return issues
|
|
|
|
|
2016-07-15 21:34:14 +00:00
|
|
|
def ordinal(value):
|
|
|
|
suffix = 'th'
|
|
|
|
if value < 10 or value > 19:
|
|
|
|
if value % 10 == 1:
|
|
|
|
suffix = 'st'
|
|
|
|
elif value % 10 == 2:
|
|
|
|
suffix = 'nd'
|
|
|
|
elif value % 10 == 3:
|
|
|
|
suffix = 'rd'
|
|
|
|
return '%d%s' % (value, suffix)
|
|
|
|
|
2014-01-17 00:18:22 +00:00
|
|
|
# Function: createHTML
|
|
|
|
# Description:
|
2014-08-08 16:11:59 +00:00
|
|
|
# Create the output html file from the resident test data
|
|
|
|
# Arguments:
|
|
|
|
# testruns: array of Data objects from parseKernelLog or parseTraceLog
|
|
|
|
# Output:
|
|
|
|
# True if the html file was created, false if it failed
|
2018-05-24 16:36:28 +00:00
|
|
|
def createHTML(testruns, testfail):
|
2016-07-15 21:34:14 +00:00
|
|
|
if len(testruns) < 1:
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint('ERROR: Not enough test data to build a timeline')
|
2016-07-15 21:34:14 +00:00
|
|
|
return
|
|
|
|
|
2016-12-14 18:37:07 +00:00
|
|
|
kerror = False
|
2014-08-08 16:11:59 +00:00
|
|
|
for data in testruns:
|
2016-12-14 18:37:07 +00:00
|
|
|
if data.kerror:
|
|
|
|
kerror = True
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
if(sysvals.suspendmode in ['freeze', 'standby']):
|
|
|
|
data.trimFreezeTime(testruns[-1].tSuspended)
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
else:
|
|
|
|
data.getMemTime()
|
2014-01-17 00:18:22 +00:00
|
|
|
|
|
|
|
# html function templates
|
2018-01-30 08:17:20 +00:00
|
|
|
html_error = '<div id="{1}" title="kernel error/warning" class="err" style="right:{0}%">{2}→</div>\n'
|
2016-12-14 18:37:06 +00:00
|
|
|
html_traceevent = '<div title="{0}" class="traceevent{6}" style="left:{1}%;top:{2}px;height:{3}px;width:{4}%;line-height:{3}px;{7}">{5}</div>\n'
|
2016-12-14 18:37:05 +00:00
|
|
|
html_cpuexec = '<div class="jiffie" style="left:{0}%;top:{1}px;height:{2}px;width:{3}%;background:{4};"></div>\n'
|
2014-01-17 00:18:22 +00:00
|
|
|
html_timetotal = '<table class="time1">\n<tr>'\
|
2016-12-14 18:37:06 +00:00
|
|
|
'<td class="green" title="{3}">{2} Suspend Time: <b>{0} ms</b></td>'\
|
|
|
|
'<td class="yellow" title="{4}">{2} Resume Time: <b>{1} ms</b></td>'\
|
2014-08-08 16:11:59 +00:00
|
|
|
'</tr>\n</table>\n'
|
|
|
|
html_timetotal2 = '<table class="time1">\n<tr>'\
|
2016-12-14 18:37:06 +00:00
|
|
|
'<td class="green" title="{4}">{3} Suspend Time: <b>{0} ms</b></td>'\
|
|
|
|
'<td class="gray" title="time spent in low-power mode with clock running">'+sysvals.suspendmode+' time: <b>{1} ms</b></td>'\
|
|
|
|
'<td class="yellow" title="{5}">{3} Resume Time: <b>{2} ms</b></td>'\
|
2014-01-17 00:18:22 +00:00
|
|
|
'</tr>\n</table>\n'
|
2016-07-15 21:34:14 +00:00
|
|
|
html_timetotal3 = '<table class="time1">\n<tr>'\
|
|
|
|
'<td class="green">Execution Time: <b>{0} ms</b></td>'\
|
|
|
|
'<td class="yellow">Command: <b>{1}</b></td>'\
|
|
|
|
'</tr>\n</table>\n'
|
2018-05-24 16:36:28 +00:00
|
|
|
html_fail = '<table class="testfail"><tr><td>{0}</td></tr></table>\n'
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
html_kdesc = '<td class="{3}" title="time spent in kernel execution">{0}Kernel {2}: {1} ms</td>'
|
|
|
|
html_fwdesc = '<td class="{3}" title="time spent in firmware">{0}Firmware {2}: {1} ms</td>'
|
|
|
|
html_wifdesc = '<td class="yellow" title="time for wifi to reconnect after resume complete ({2})">{0}Wifi Resume: {1}</td>'
|
2014-01-17 00:18:22 +00:00
|
|
|
|
2016-07-15 21:34:14 +00:00
|
|
|
# html format variables
|
2016-12-14 18:37:07 +00:00
|
|
|
scaleH = 20
|
|
|
|
if kerror:
|
|
|
|
scaleH = 40
|
2016-07-15 21:34:14 +00:00
|
|
|
|
2014-08-08 16:11:59 +00:00
|
|
|
# device timeline
|
2016-12-14 18:37:07 +00:00
|
|
|
devtl = Timeline(30, scaleH)
|
2014-01-17 00:18:22 +00:00
|
|
|
|
2017-04-07 18:05:35 +00:00
|
|
|
# write the test title and general info header
|
2018-01-30 08:17:20 +00:00
|
|
|
devtl.createHeader(sysvals, testruns[0].stamp)
|
2017-04-07 18:05:35 +00:00
|
|
|
|
2014-08-08 16:11:59 +00:00
|
|
|
# Generate the header for this timeline
|
|
|
|
for data in testruns:
|
|
|
|
tTotal = data.end - data.start
|
2014-01-17 00:18:22 +00:00
|
|
|
if(tTotal == 0):
|
2018-01-30 08:17:20 +00:00
|
|
|
doError('No timeline data')
|
2016-07-15 21:34:14 +00:00
|
|
|
if sysvals.suspendmode == 'command':
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
run_time = '%.0f' % (tTotal * 1000)
|
2016-07-15 21:34:14 +00:00
|
|
|
if sysvals.testcommand:
|
|
|
|
testdesc = sysvals.testcommand
|
|
|
|
else:
|
|
|
|
testdesc = 'unknown'
|
|
|
|
if(len(testruns) > 1):
|
|
|
|
testdesc = ordinal(data.testnumber+1)+' '+testdesc
|
|
|
|
thtml = html_timetotal3.format(run_time, testdesc)
|
2017-04-07 18:05:35 +00:00
|
|
|
devtl.html += thtml
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
continue
|
|
|
|
# typical full suspend/resume header
|
|
|
|
stot, rtot = sktime, rktime = data.getTimeValues()
|
|
|
|
ssrc, rsrc, testdesc, testdesc2 = ['kernel'], ['kernel'], 'Kernel', ''
|
|
|
|
if data.fwValid:
|
|
|
|
stot += (data.fwSuspend/1000000.0)
|
|
|
|
rtot += (data.fwResume/1000000.0)
|
|
|
|
ssrc.append('firmware')
|
|
|
|
rsrc.append('firmware')
|
|
|
|
testdesc = 'Total'
|
|
|
|
if 'time' in data.wifi and data.wifi['stat'] != 'timeout':
|
|
|
|
rtot += data.end - data.tKernRes + (data.wifi['time'] * 1000.0)
|
|
|
|
rsrc.append('wifi')
|
|
|
|
testdesc = 'Total'
|
|
|
|
suspend_time, resume_time = '%.3f' % stot, '%.3f' % rtot
|
|
|
|
stitle = 'time from kernel suspend start to %s mode [%s time]' % \
|
|
|
|
(sysvals.suspendmode, ' & '.join(ssrc))
|
|
|
|
rtitle = 'time from %s mode to kernel resume complete [%s time]' % \
|
|
|
|
(sysvals.suspendmode, ' & '.join(rsrc))
|
|
|
|
if(len(testruns) > 1):
|
|
|
|
testdesc = testdesc2 = ordinal(data.testnumber+1)
|
|
|
|
testdesc2 += ' '
|
|
|
|
if(len(data.tLow) == 0):
|
|
|
|
thtml = html_timetotal.format(suspend_time, \
|
|
|
|
resume_time, testdesc, stitle, rtitle)
|
|
|
|
else:
|
|
|
|
low_time = '+'.join(data.tLow)
|
|
|
|
thtml = html_timetotal2.format(suspend_time, low_time, \
|
|
|
|
resume_time, testdesc, stitle, rtitle)
|
|
|
|
devtl.html += thtml
|
|
|
|
if not data.fwValid and 'dev' not in data.wifi:
|
|
|
|
continue
|
|
|
|
# extra detail when the times come from multiple sources
|
|
|
|
thtml = '<table class="time2">\n<tr>'
|
|
|
|
thtml += html_kdesc.format(testdesc2, '%.3f'%sktime, 'Suspend', 'green')
|
|
|
|
if data.fwValid:
|
2014-08-08 16:11:59 +00:00
|
|
|
sftime = '%.3f'%(data.fwSuspend / 1000000.0)
|
|
|
|
rftime = '%.3f'%(data.fwResume / 1000000.0)
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
thtml += html_fwdesc.format(testdesc2, sftime, 'Suspend', 'green')
|
|
|
|
thtml += html_fwdesc.format(testdesc2, rftime, 'Resume', 'yellow')
|
|
|
|
thtml += html_kdesc.format(testdesc2, '%.3f'%rktime, 'Resume', 'yellow')
|
|
|
|
if 'time' in data.wifi:
|
|
|
|
if data.wifi['stat'] != 'timeout':
|
|
|
|
wtime = '%.0f ms'%(data.end - data.tKernRes + (data.wifi['time'] * 1000.0))
|
2014-08-08 16:11:59 +00:00
|
|
|
else:
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
wtime = 'TIMEOUT'
|
|
|
|
thtml += html_wifdesc.format(testdesc2, wtime, data.wifi['dev'])
|
|
|
|
thtml += '</tr>\n</table>\n'
|
|
|
|
devtl.html += thtml
|
2018-05-24 16:36:28 +00:00
|
|
|
if testfail:
|
|
|
|
devtl.html += html_fail.format(testfail)
|
|
|
|
|
2014-08-08 16:11:59 +00:00
|
|
|
# time scale for potentially multiple datasets
|
|
|
|
t0 = testruns[0].start
|
|
|
|
tMax = testruns[-1].end
|
|
|
|
tTotal = tMax - t0
|
2014-01-17 00:18:22 +00:00
|
|
|
|
2014-08-08 16:11:59 +00:00
|
|
|
# determine the maximum number of rows we need to draw
|
2016-12-14 18:37:05 +00:00
|
|
|
fulllist = []
|
2016-12-14 18:37:06 +00:00
|
|
|
threadlist = []
|
|
|
|
pscnt = 0
|
|
|
|
devcnt = 0
|
2014-08-08 16:11:59 +00:00
|
|
|
for data in testruns:
|
2016-07-15 21:34:14 +00:00
|
|
|
data.selectTimelineDevices('%f', tTotal, sysvals.mindevlen)
|
|
|
|
for group in data.devicegroups:
|
|
|
|
devlist = []
|
|
|
|
for phase in group:
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
for devname in sorted(data.tdevlist[phase]):
|
2016-12-14 18:37:05 +00:00
|
|
|
d = DevItem(data.testnumber, phase, data.dmesg[phase]['list'][devname])
|
|
|
|
devlist.append(d)
|
2016-12-14 18:37:06 +00:00
|
|
|
if d.isa('kth'):
|
|
|
|
threadlist.append(d)
|
|
|
|
else:
|
|
|
|
if d.isa('ps'):
|
|
|
|
pscnt += 1
|
|
|
|
else:
|
|
|
|
devcnt += 1
|
|
|
|
fulllist.append(d)
|
2016-12-14 18:37:05 +00:00
|
|
|
if sysvals.mixedphaseheight:
|
|
|
|
devtl.getPhaseRows(devlist)
|
|
|
|
if not sysvals.mixedphaseheight:
|
2016-12-14 18:37:06 +00:00
|
|
|
if len(threadlist) > 0 and len(fulllist) > 0:
|
|
|
|
if pscnt > 0 and devcnt > 0:
|
|
|
|
msg = 'user processes & device pm callbacks'
|
|
|
|
elif pscnt > 0:
|
|
|
|
msg = 'user processes'
|
|
|
|
else:
|
|
|
|
msg = 'device pm callbacks'
|
|
|
|
d = testruns[0].addHorizontalDivider(msg, testruns[-1].end)
|
|
|
|
fulllist.insert(0, d)
|
2016-12-14 18:37:05 +00:00
|
|
|
devtl.getPhaseRows(fulllist)
|
2016-12-14 18:37:06 +00:00
|
|
|
if len(threadlist) > 0:
|
|
|
|
d = testruns[0].addHorizontalDivider('asynchronous kernel threads', testruns[-1].end)
|
|
|
|
threadlist.insert(0, d)
|
|
|
|
devtl.getPhaseRows(threadlist, devtl.rows)
|
2016-07-15 21:34:14 +00:00
|
|
|
devtl.calcTotalRows()
|
|
|
|
|
|
|
|
# draw the full timeline
|
2017-04-07 18:05:35 +00:00
|
|
|
devtl.createZoomBox(sysvals.suspendmode, len(testruns))
|
2014-08-08 16:11:59 +00:00
|
|
|
for data in testruns:
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
# draw each test run and block chronologically
|
|
|
|
phases = {'suspend':[],'resume':[]}
|
|
|
|
for phase in data.sortedPhases():
|
|
|
|
if data.dmesg[phase]['start'] >= data.tSuspended:
|
|
|
|
phases['resume'].append(phase)
|
|
|
|
else:
|
|
|
|
phases['suspend'].append(phase)
|
2016-07-15 21:34:14 +00:00
|
|
|
# now draw the actual timeline blocks
|
|
|
|
for dir in phases:
|
|
|
|
# draw suspend and resume blocks separately
|
|
|
|
bname = '%s%d' % (dir[0], data.testnumber)
|
|
|
|
if dir == 'suspend':
|
2017-04-07 18:05:35 +00:00
|
|
|
m0 = data.start
|
|
|
|
mMax = data.tSuspended
|
2016-07-15 21:34:14 +00:00
|
|
|
left = '%f' % (((m0-t0)*100.0)/tTotal)
|
|
|
|
else:
|
2017-04-07 18:05:35 +00:00
|
|
|
m0 = data.tSuspended
|
|
|
|
mMax = data.end
|
2016-12-14 18:37:05 +00:00
|
|
|
# in an x2 run, remove any gap between blocks
|
|
|
|
if len(testruns) > 1 and data.testnumber == 0:
|
|
|
|
mMax = testruns[1].start
|
2016-07-15 21:34:14 +00:00
|
|
|
left = '%f' % ((((m0-t0)*100.0)+sysvals.srgap/2)/tTotal)
|
2017-04-07 18:05:35 +00:00
|
|
|
mTotal = mMax - m0
|
2016-07-15 21:34:14 +00:00
|
|
|
# if a timeline block is 0 length, skip altogether
|
|
|
|
if mTotal == 0:
|
|
|
|
continue
|
|
|
|
width = '%f' % (((mTotal*100.0)-sysvals.srgap/2)/tTotal)
|
2017-04-07 18:05:35 +00:00
|
|
|
devtl.html += devtl.html_tblock.format(bname, left, width, devtl.scaleH)
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
for b in phases[dir]:
|
2016-07-15 21:34:14 +00:00
|
|
|
# draw the phase color background
|
|
|
|
phase = data.dmesg[b]
|
|
|
|
length = phase['end']-phase['start']
|
|
|
|
left = '%f' % (((phase['start']-m0)*100.0)/mTotal)
|
|
|
|
width = '%f' % ((length*100.0)/mTotal)
|
2017-04-07 18:05:35 +00:00
|
|
|
devtl.html += devtl.html_phase.format(left, width, \
|
2016-07-15 21:34:14 +00:00
|
|
|
'%.3f'%devtl.scaleH, '%.3f'%devtl.bodyH, \
|
|
|
|
data.dmesg[b]['color'], '')
|
2016-12-14 18:37:07 +00:00
|
|
|
for e in data.errorinfo[dir]:
|
|
|
|
# draw red lines for any kernel errors found
|
2018-01-30 08:17:20 +00:00
|
|
|
type, t, idx1, idx2 = e
|
|
|
|
id = '%d_%d' % (idx1, idx2)
|
2016-12-14 18:37:07 +00:00
|
|
|
right = '%f' % (((mMax-t)*100.0)/mTotal)
|
2018-01-30 08:17:20 +00:00
|
|
|
devtl.html += html_error.format(right, id, type)
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
for b in phases[dir]:
|
2016-07-15 21:34:14 +00:00
|
|
|
# draw the devices for this phase
|
|
|
|
phaselist = data.dmesg[b]['list']
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
for d in sorted(data.tdevlist[b]):
|
2020-11-11 02:36:17 +00:00
|
|
|
dname = d if ('[' not in d or 'CPU' in d) else d.split('[')[0]
|
2020-07-21 01:02:49 +00:00
|
|
|
name, dev = dname, phaselist[d]
|
|
|
|
drv = xtraclass = xtrainfo = xtrastyle = ''
|
2016-07-15 21:34:14 +00:00
|
|
|
if 'htmlclass' in dev:
|
|
|
|
xtraclass = dev['htmlclass']
|
|
|
|
if 'color' in dev:
|
2017-04-07 18:05:35 +00:00
|
|
|
xtrastyle = 'background:%s;' % dev['color']
|
2016-07-15 21:34:14 +00:00
|
|
|
if(d in sysvals.devprops):
|
|
|
|
name = sysvals.devprops[d].altName(d)
|
|
|
|
xtraclass = sysvals.devprops[d].xtraClass()
|
|
|
|
xtrainfo = sysvals.devprops[d].xtraInfo()
|
2016-12-14 18:37:05 +00:00
|
|
|
elif xtraclass == ' kth':
|
|
|
|
xtrainfo = ' kernel_thread'
|
2016-07-15 21:34:14 +00:00
|
|
|
if('drv' in dev and dev['drv']):
|
|
|
|
drv = ' {%s}' % dev['drv']
|
2016-12-14 18:37:05 +00:00
|
|
|
rowheight = devtl.phaseRowHeight(data.testnumber, b, dev['row'])
|
|
|
|
rowtop = devtl.phaseRowTop(data.testnumber, b, dev['row'])
|
2016-07-15 21:34:14 +00:00
|
|
|
top = '%.3f' % (rowtop + devtl.scaleH)
|
|
|
|
left = '%f' % (((dev['start']-m0)*100)/mTotal)
|
|
|
|
width = '%f' % (((dev['end']-dev['start'])*100)/mTotal)
|
|
|
|
length = ' (%0.3f ms) ' % ((dev['end']-dev['start'])*1000)
|
2016-12-14 18:37:05 +00:00
|
|
|
title = name+drv+xtrainfo+length
|
2016-07-15 21:34:14 +00:00
|
|
|
if sysvals.suspendmode == 'command':
|
2016-12-14 18:37:06 +00:00
|
|
|
title += sysvals.testcommand
|
2016-12-14 18:37:05 +00:00
|
|
|
elif xtraclass == ' ps':
|
|
|
|
if 'suspend' in b:
|
|
|
|
title += 'pre_suspend_process'
|
|
|
|
else:
|
|
|
|
title += 'post_resume_process'
|
2016-07-15 21:34:14 +00:00
|
|
|
else:
|
2016-12-14 18:37:05 +00:00
|
|
|
title += b
|
2017-04-07 18:05:35 +00:00
|
|
|
devtl.html += devtl.html_device.format(dev['id'], \
|
2016-07-15 21:34:14 +00:00
|
|
|
title, left, top, '%.3f'%rowheight, width, \
|
2020-07-21 01:02:49 +00:00
|
|
|
dname+drv, xtraclass, xtrastyle)
|
2016-12-14 18:37:05 +00:00
|
|
|
if('cpuexec' in dev):
|
|
|
|
for t in sorted(dev['cpuexec']):
|
|
|
|
start, end = t
|
|
|
|
j = float(dev['cpuexec'][t]) / 5
|
|
|
|
if j > 1.0:
|
|
|
|
j = 1.0
|
|
|
|
height = '%.3f' % (rowheight/3)
|
|
|
|
top = '%.3f' % (rowtop + devtl.scaleH + 2*rowheight/3)
|
|
|
|
left = '%f' % (((start-m0)*100)/mTotal)
|
|
|
|
width = '%f' % ((end-start)*100/mTotal)
|
|
|
|
color = 'rgba(255, 0, 0, %f)' % j
|
2017-04-07 18:05:35 +00:00
|
|
|
devtl.html += \
|
2016-12-14 18:37:05 +00:00
|
|
|
html_cpuexec.format(left, top, height, width, color)
|
2016-07-15 21:34:14 +00:00
|
|
|
if('src' not in dev):
|
|
|
|
continue
|
|
|
|
# draw any trace events for this device
|
|
|
|
for e in dev['src']:
|
2020-07-21 01:02:49 +00:00
|
|
|
if e.length == 0:
|
|
|
|
continue
|
2016-12-14 18:37:05 +00:00
|
|
|
height = '%.3f' % devtl.rowH
|
2016-07-15 21:34:14 +00:00
|
|
|
top = '%.3f' % (rowtop + devtl.scaleH + (e.row*devtl.rowH))
|
|
|
|
left = '%f' % (((e.time-m0)*100)/mTotal)
|
|
|
|
width = '%f' % (e.length*100/mTotal)
|
2016-12-14 18:37:06 +00:00
|
|
|
xtrastyle = ''
|
|
|
|
if e.color:
|
|
|
|
xtrastyle = 'background:%s;' % e.color
|
2017-04-07 18:05:35 +00:00
|
|
|
devtl.html += \
|
2016-12-14 18:37:05 +00:00
|
|
|
html_traceevent.format(e.title(), \
|
2016-12-14 18:37:06 +00:00
|
|
|
left, top, height, width, e.text(), '', xtrastyle)
|
2016-07-15 21:34:14 +00:00
|
|
|
# draw the time scale, try to make the number of labels readable
|
2017-04-07 18:05:35 +00:00
|
|
|
devtl.createTimeScale(m0, mMax, tTotal, dir)
|
|
|
|
devtl.html += '</div>\n'
|
2014-08-08 16:11:59 +00:00
|
|
|
|
|
|
|
# timeline is finished
|
2017-04-07 18:05:35 +00:00
|
|
|
devtl.html += '</div>\n</div>\n'
|
2014-08-08 16:11:59 +00:00
|
|
|
|
|
|
|
# draw a legend which describes the phases by color
|
2016-07-15 21:34:14 +00:00
|
|
|
if sysvals.suspendmode != 'command':
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
phasedef = testruns[-1].phasedef
|
2017-04-07 18:05:35 +00:00
|
|
|
devtl.html += '<div class="legend">\n'
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
pdelta = 100.0/len(phasedef.keys())
|
2016-07-15 21:34:14 +00:00
|
|
|
pmargin = pdelta / 4.0
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
for phase in sorted(phasedef, key=lambda k:phasedef[k]['order']):
|
|
|
|
id, p = '', phasedef[phase]
|
|
|
|
for word in phase.split('_'):
|
|
|
|
id += word[0]
|
|
|
|
order = '%.2f' % ((p['order'] * pdelta) + pmargin)
|
2019-05-14 17:53:58 +00:00
|
|
|
name = phase.replace('_', ' ')
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
devtl.html += devtl.html_legend.format(order, p['color'], name, id)
|
2017-04-07 18:05:35 +00:00
|
|
|
devtl.html += '</div>\n'
|
2014-01-17 00:18:22 +00:00
|
|
|
|
|
|
|
hf = open(sysvals.htmlfile, 'w')
|
2018-01-30 08:17:20 +00:00
|
|
|
addCSS(hf, sysvals, len(testruns), kerror)
|
2014-08-08 16:11:59 +00:00
|
|
|
|
|
|
|
# write the device timeline
|
2017-04-07 18:05:35 +00:00
|
|
|
hf.write(devtl.html)
|
2014-08-08 16:11:59 +00:00
|
|
|
hf.write('<div id="devicedetailtitle"></div>\n')
|
|
|
|
hf.write('<div id="devicedetail" style="display:none;">\n')
|
|
|
|
# draw the colored boxes for the device detail section
|
|
|
|
for data in testruns:
|
|
|
|
hf.write('<div id="devicedetail%d">\n' % data.testnumber)
|
2016-12-14 18:37:05 +00:00
|
|
|
pscolor = 'linear-gradient(to top left, #ccc, #eee)'
|
2017-04-07 18:05:35 +00:00
|
|
|
hf.write(devtl.html_phaselet.format('pre_suspend_process', \
|
2016-12-14 18:37:05 +00:00
|
|
|
'0', '0', pscolor))
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
for b in data.sortedPhases():
|
2014-08-08 16:11:59 +00:00
|
|
|
phase = data.dmesg[b]
|
|
|
|
length = phase['end']-phase['start']
|
|
|
|
left = '%.3f' % (((phase['start']-t0)*100.0)/tTotal)
|
|
|
|
width = '%.3f' % ((length*100.0)/tTotal)
|
2017-04-07 18:05:35 +00:00
|
|
|
hf.write(devtl.html_phaselet.format(b, left, width, \
|
2014-08-08 16:11:59 +00:00
|
|
|
data.dmesg[b]['color']))
|
2017-04-07 18:05:35 +00:00
|
|
|
hf.write(devtl.html_phaselet.format('post_resume_process', \
|
2016-12-14 18:37:05 +00:00
|
|
|
'0', '0', pscolor))
|
2016-07-15 21:34:14 +00:00
|
|
|
if sysvals.suspendmode == 'command':
|
2017-04-07 18:05:35 +00:00
|
|
|
hf.write(devtl.html_phaselet.format('cmdexec', '0', '0', pscolor))
|
2014-08-08 16:11:59 +00:00
|
|
|
hf.write('</div>\n')
|
|
|
|
hf.write('</div>\n')
|
2014-01-17 00:18:22 +00:00
|
|
|
|
|
|
|
# write the ftrace data (callgraph)
|
2016-12-14 18:37:07 +00:00
|
|
|
if sysvals.cgtest >= 0 and len(testruns) > sysvals.cgtest:
|
|
|
|
data = testruns[sysvals.cgtest]
|
|
|
|
else:
|
|
|
|
data = testruns[-1]
|
2018-01-30 08:17:20 +00:00
|
|
|
if sysvals.usecallgraph:
|
2017-04-07 18:05:35 +00:00
|
|
|
addCallgraphs(sysvals, hf, data)
|
2016-07-15 21:34:14 +00:00
|
|
|
|
2016-12-14 18:37:07 +00:00
|
|
|
# add the test log as a hidden div
|
2017-07-05 21:42:55 +00:00
|
|
|
if sysvals.testlog and sysvals.logmsg:
|
2016-12-14 18:37:07 +00:00
|
|
|
hf.write('<div id="testlog" style="display:none;">\n'+sysvals.logmsg+'</div>\n')
|
2016-07-15 21:34:14 +00:00
|
|
|
# add the dmesg log as a hidden div
|
2017-07-05 21:42:55 +00:00
|
|
|
if sysvals.dmesglog and sysvals.dmesgfile:
|
2016-07-15 21:34:14 +00:00
|
|
|
hf.write('<div id="dmesglog" style="display:none;">\n')
|
2018-01-30 08:17:20 +00:00
|
|
|
lf = sysvals.openlog(sysvals.dmesgfile, 'r')
|
2016-07-15 21:34:14 +00:00
|
|
|
for line in lf:
|
2016-12-14 18:37:07 +00:00
|
|
|
line = line.replace('<', '<').replace('>', '>')
|
2016-07-15 21:34:14 +00:00
|
|
|
hf.write(line)
|
|
|
|
lf.close()
|
|
|
|
hf.write('</div>\n')
|
|
|
|
# add the ftrace log as a hidden div
|
2017-07-05 21:42:55 +00:00
|
|
|
if sysvals.ftracelog and sysvals.ftracefile:
|
2016-07-15 21:34:14 +00:00
|
|
|
hf.write('<div id="ftracelog" style="display:none;">\n')
|
2018-01-30 08:17:20 +00:00
|
|
|
lf = sysvals.openlog(sysvals.ftracefile, 'r')
|
2016-07-15 21:34:14 +00:00
|
|
|
for line in lf:
|
|
|
|
hf.write(line)
|
|
|
|
lf.close()
|
|
|
|
hf.write('</div>\n')
|
|
|
|
|
2018-01-30 08:17:20 +00:00
|
|
|
# write the footer and close
|
|
|
|
addScriptCode(hf, testruns)
|
|
|
|
hf.write('</body>\n</html>\n')
|
2014-01-17 00:18:22 +00:00
|
|
|
hf.close()
|
|
|
|
return True
|
|
|
|
|
2017-04-07 18:05:35 +00:00
|
|
|
def addCSS(hf, sv, testcount=1, kerror=False, extra=''):
|
|
|
|
kernel = sv.stamp['kernel']
|
|
|
|
host = sv.hostname[0].upper()+sv.hostname[1:]
|
|
|
|
mode = sv.suspendmode
|
|
|
|
if sv.suspendmode in suspendmodename:
|
|
|
|
mode = suspendmodename[sv.suspendmode]
|
|
|
|
title = host+' '+mode+' '+kernel
|
|
|
|
|
|
|
|
# various format changes by flags
|
|
|
|
cgchk = 'checked'
|
|
|
|
cgnchk = 'not(:checked)'
|
|
|
|
if sv.cgexp:
|
|
|
|
cgchk = 'not(:checked)'
|
|
|
|
cgnchk = 'checked'
|
|
|
|
|
|
|
|
hoverZ = 'z-index:8;'
|
|
|
|
if sv.usedevsrc:
|
|
|
|
hoverZ = ''
|
|
|
|
|
|
|
|
devlistpos = 'absolute'
|
|
|
|
if testcount > 1:
|
|
|
|
devlistpos = 'relative'
|
|
|
|
|
|
|
|
scaleTH = 20
|
|
|
|
if kerror:
|
|
|
|
scaleTH = 60
|
|
|
|
|
|
|
|
# write the html header first (html head, css code, up to body start)
|
|
|
|
html_header = '<!DOCTYPE html>\n<html>\n<head>\n\
|
|
|
|
<meta http-equiv="content-type" content="text/html; charset=UTF-8">\n\
|
|
|
|
<title>'+title+'</title>\n\
|
|
|
|
<style type=\'text/css\'>\n\
|
|
|
|
body {overflow-y:scroll;}\n\
|
|
|
|
.stamp {width:100%;text-align:center;background:gray;line-height:30px;color:white;font:25px Arial;}\n\
|
2017-07-05 21:42:55 +00:00
|
|
|
.stamp.sysinfo {font:10px Arial;}\n\
|
2017-04-07 18:05:35 +00:00
|
|
|
.callgraph {margin-top:30px;box-shadow:5px 5px 20px black;}\n\
|
|
|
|
.callgraph article * {padding-left:28px;}\n\
|
|
|
|
h1 {color:black;font:bold 30px Times;}\n\
|
|
|
|
t0 {color:black;font:bold 30px Times;}\n\
|
|
|
|
t1 {color:black;font:30px Times;}\n\
|
|
|
|
t2 {color:black;font:25px Times;}\n\
|
|
|
|
t3 {color:black;font:20px Times;white-space:nowrap;}\n\
|
|
|
|
t4 {color:black;font:bold 30px Times;line-height:60px;white-space:nowrap;}\n\
|
|
|
|
cS {font:bold 13px Times;}\n\
|
|
|
|
table {width:100%;}\n\
|
|
|
|
.gray {background:rgba(80,80,80,0.1);}\n\
|
|
|
|
.green {background:rgba(204,255,204,0.4);}\n\
|
|
|
|
.purple {background:rgba(128,0,128,0.2);}\n\
|
|
|
|
.yellow {background:rgba(255,255,204,0.4);}\n\
|
|
|
|
.blue {background:rgba(169,208,245,0.4);}\n\
|
|
|
|
.time1 {font:22px Arial;border:1px solid;}\n\
|
|
|
|
.time2 {font:15px Arial;border-bottom:1px solid;border-left:1px solid;border-right:1px solid;}\n\
|
2018-05-24 16:36:28 +00:00
|
|
|
.testfail {font:bold 22px Arial;color:red;border:1px dashed;}\n\
|
2017-04-07 18:05:35 +00:00
|
|
|
td {text-align:center;}\n\
|
|
|
|
r {color:#500000;font:15px Tahoma;}\n\
|
|
|
|
n {color:#505050;font:15px Tahoma;}\n\
|
|
|
|
.tdhl {color:red;}\n\
|
|
|
|
.hide {display:none;}\n\
|
|
|
|
.pf {display:none;}\n\
|
|
|
|
.pf:'+cgchk+' + label {background:url(\'data:image/svg+xml;utf,<?xml version="1.0" standalone="no"?><svg xmlns="http://www.w3.org/2000/svg" height="18" width="18" version="1.1"><circle cx="9" cy="9" r="8" stroke="black" stroke-width="1" fill="white"/><rect x="4" y="8" width="10" height="2" style="fill:black;stroke-width:0"/><rect x="8" y="4" width="2" height="10" style="fill:black;stroke-width:0"/></svg>\') no-repeat left center;}\n\
|
|
|
|
.pf:'+cgnchk+' ~ label {background:url(\'data:image/svg+xml;utf,<?xml version="1.0" standalone="no"?><svg xmlns="http://www.w3.org/2000/svg" height="18" width="18" version="1.1"><circle cx="9" cy="9" r="8" stroke="black" stroke-width="1" fill="white"/><rect x="4" y="8" width="10" height="2" style="fill:black;stroke-width:0"/></svg>\') no-repeat left center;}\n\
|
|
|
|
.pf:'+cgchk+' ~ *:not(:nth-child(2)) {display:none;}\n\
|
|
|
|
.zoombox {position:relative;width:100%;overflow-x:scroll;-webkit-user-select:none;-moz-user-select:none;user-select:none;}\n\
|
|
|
|
.timeline {position:relative;font-size:14px;cursor:pointer;width:100%; overflow:hidden;background:linear-gradient(#cccccc, white);}\n\
|
|
|
|
.thread {position:absolute;height:0%;overflow:hidden;z-index:7;line-height:30px;font-size:14px;border:1px solid;text-align:center;white-space:nowrap;}\n\
|
|
|
|
.thread.ps {border-radius:3px;background:linear-gradient(to top, #ccc, #eee);}\n\
|
|
|
|
.thread:hover {background:white;border:1px solid red;'+hoverZ+'}\n\
|
|
|
|
.thread.sec,.thread.sec:hover {background:black;border:0;color:white;line-height:15px;font-size:10px;}\n\
|
|
|
|
.hover {background:white;border:1px solid red;'+hoverZ+'}\n\
|
|
|
|
.hover.sync {background:white;}\n\
|
|
|
|
.hover.bg,.hover.kth,.hover.sync,.hover.ps {background:white;}\n\
|
|
|
|
.jiffie {position:absolute;pointer-events: none;z-index:8;}\n\
|
|
|
|
.traceevent {position:absolute;font-size:10px;z-index:7;overflow:hidden;color:black;text-align:center;white-space:nowrap;border-radius:5px;border:1px solid black;background:linear-gradient(to bottom right,#CCC,#969696);}\n\
|
|
|
|
.traceevent:hover {color:white;font-weight:bold;border:1px solid white;}\n\
|
|
|
|
.phase {position:absolute;overflow:hidden;border:0px;text-align:center;}\n\
|
|
|
|
.phaselet {float:left;overflow:hidden;border:0px;text-align:center;min-height:100px;font-size:24px;}\n\
|
|
|
|
.t {position:absolute;line-height:'+('%d'%scaleTH)+'px;pointer-events:none;top:0;height:100%;border-right:1px solid black;z-index:6;}\n\
|
|
|
|
.err {position:absolute;top:0%;height:100%;border-right:3px solid red;color:red;font:bold 14px Times;line-height:18px;}\n\
|
|
|
|
.legend {position:relative; width:100%; height:40px; text-align:center;margin-bottom:20px}\n\
|
|
|
|
.legend .square {position:absolute;cursor:pointer;top:10px; width:0px;height:20px;border:1px solid;padding-left:20px;}\n\
|
|
|
|
button {height:40px;width:200px;margin-bottom:20px;margin-top:20px;font-size:24px;}\n\
|
2017-07-05 21:42:55 +00:00
|
|
|
.btnfmt {position:relative;float:right;height:25px;width:auto;margin-top:3px;margin-bottom:0;font-size:10px;text-align:center;}\n\
|
2017-04-07 18:05:35 +00:00
|
|
|
.devlist {position:'+devlistpos+';width:190px;}\n\
|
|
|
|
a:link {color:white;text-decoration:none;}\n\
|
|
|
|
a:visited {color:white;}\n\
|
|
|
|
a:hover {color:white;}\n\
|
|
|
|
a:active {color:white;}\n\
|
|
|
|
.version {position:relative;float:left;color:white;font-size:10px;line-height:30px;margin-left:10px;}\n\
|
|
|
|
#devicedetail {min-height:100px;box-shadow:5px 5px 20px black;}\n\
|
|
|
|
.tblock {position:absolute;height:100%;background:#ddd;}\n\
|
|
|
|
.tback {position:absolute;width:100%;background:linear-gradient(#ccc, #ddd);}\n\
|
|
|
|
.bg {z-index:1;}\n\
|
|
|
|
'+extra+'\
|
|
|
|
</style>\n</head>\n<body>\n'
|
|
|
|
hf.write(html_header)
|
|
|
|
|
2014-08-08 16:11:59 +00:00
|
|
|
# Function: addScriptCode
|
|
|
|
# Description:
|
|
|
|
# Adds the javascript code to the output html
|
|
|
|
# Arguments:
|
|
|
|
# hf: the open html file pointer
|
|
|
|
# testruns: array of Data objects from parseKernelLog or parseTraceLog
|
|
|
|
def addScriptCode(hf, testruns):
|
2016-07-15 21:34:14 +00:00
|
|
|
t0 = testruns[0].start * 1000
|
|
|
|
tMax = testruns[-1].end * 1000
|
2014-01-17 00:18:22 +00:00
|
|
|
# create an array in javascript memory with the device details
|
2014-08-08 16:11:59 +00:00
|
|
|
detail = ' var devtable = [];\n'
|
|
|
|
for data in testruns:
|
|
|
|
topo = data.deviceTopology()
|
|
|
|
detail += ' devtable[%d] = "%s";\n' % (data.testnumber, topo)
|
|
|
|
detail += ' var bounds = [%f,%f];\n' % (t0, tMax)
|
2014-01-17 00:18:22 +00:00
|
|
|
# add the code which will manipulate the data in the browser
|
|
|
|
script_code = \
|
|
|
|
'<script type="text/javascript">\n'+detail+\
|
2016-07-15 21:34:14 +00:00
|
|
|
' var resolution = -1;\n'\
|
2016-12-14 18:37:05 +00:00
|
|
|
' var dragval = [0, 0];\n'\
|
2016-07-15 21:34:14 +00:00
|
|
|
' function redrawTimescale(t0, tMax, tS) {\n'\
|
2017-04-07 18:05:35 +00:00
|
|
|
' var rline = \'<div class="t" style="left:0;border-left:1px solid black;border-right:0;">\';\n'\
|
2016-07-15 21:34:14 +00:00
|
|
|
' var tTotal = tMax - t0;\n'\
|
|
|
|
' var list = document.getElementsByClassName("tblock");\n'\
|
|
|
|
' for (var i = 0; i < list.length; i++) {\n'\
|
|
|
|
' var timescale = list[i].getElementsByClassName("timescale")[0];\n'\
|
|
|
|
' var m0 = t0 + (tTotal*parseFloat(list[i].style.left)/100);\n'\
|
|
|
|
' var mTotal = tTotal*parseFloat(list[i].style.width)/100;\n'\
|
|
|
|
' var mMax = m0 + mTotal;\n'\
|
|
|
|
' var html = "";\n'\
|
|
|
|
' var divTotal = Math.floor(mTotal/tS) + 1;\n'\
|
|
|
|
' if(divTotal > 1000) continue;\n'\
|
|
|
|
' var divEdge = (mTotal - tS*(divTotal-1))*100/mTotal;\n'\
|
|
|
|
' var pos = 0.0, val = 0.0;\n'\
|
|
|
|
' for (var j = 0; j < divTotal; j++) {\n'\
|
|
|
|
' var htmlline = "";\n'\
|
2017-04-07 18:05:35 +00:00
|
|
|
' var mode = list[i].id[5];\n'\
|
|
|
|
' if(mode == "s") {\n'\
|
2016-07-15 21:34:14 +00:00
|
|
|
' pos = 100 - (((j)*tS*100)/mTotal) - divEdge;\n'\
|
|
|
|
' val = (j-divTotal+1)*tS;\n'\
|
|
|
|
' if(j == divTotal - 1)\n'\
|
2016-12-14 18:37:07 +00:00
|
|
|
' htmlline = \'<div class="t" style="right:\'+pos+\'%"><cS>S→</cS></div>\';\n'\
|
2016-07-15 21:34:14 +00:00
|
|
|
' else\n'\
|
|
|
|
' htmlline = \'<div class="t" style="right:\'+pos+\'%">\'+val+\'ms</div>\';\n'\
|
2017-04-07 18:05:35 +00:00
|
|
|
' } else {\n'\
|
|
|
|
' pos = 100 - (((j)*tS*100)/mTotal);\n'\
|
|
|
|
' val = (j)*tS;\n'\
|
|
|
|
' htmlline = \'<div class="t" style="right:\'+pos+\'%">\'+val+\'ms</div>\';\n'\
|
|
|
|
' if(j == 0)\n'\
|
|
|
|
' if(mode == "r")\n'\
|
|
|
|
' htmlline = rline+"<cS>←R</cS></div>";\n'\
|
|
|
|
' else\n'\
|
|
|
|
' htmlline = rline+"<cS>0ms</div>";\n'\
|
2016-07-15 21:34:14 +00:00
|
|
|
' }\n'\
|
|
|
|
' html += htmlline;\n'\
|
|
|
|
' }\n'\
|
|
|
|
' timescale.innerHTML = html;\n'\
|
|
|
|
' }\n'\
|
|
|
|
' }\n'\
|
2014-01-17 00:18:22 +00:00
|
|
|
' function zoomTimeline() {\n'\
|
|
|
|
' var dmesg = document.getElementById("dmesg");\n'\
|
|
|
|
' var zoombox = document.getElementById("dmesgzoombox");\n'\
|
2017-02-09 21:27:43 +00:00
|
|
|
' var left = zoombox.scrollLeft;\n'\
|
2014-01-17 00:18:22 +00:00
|
|
|
' var val = parseFloat(dmesg.style.width);\n'\
|
|
|
|
' var newval = 100;\n'\
|
|
|
|
' var sh = window.outerWidth / 2;\n'\
|
|
|
|
' if(this.id == "zoomin") {\n'\
|
|
|
|
' newval = val * 1.2;\n'\
|
2016-07-15 21:34:14 +00:00
|
|
|
' if(newval > 910034) newval = 910034;\n'\
|
2014-01-17 00:18:22 +00:00
|
|
|
' dmesg.style.width = newval+"%";\n'\
|
2017-02-09 21:27:43 +00:00
|
|
|
' zoombox.scrollLeft = ((left + sh) * newval / val) - sh;\n'\
|
2014-01-17 00:18:22 +00:00
|
|
|
' } else if (this.id == "zoomout") {\n'\
|
|
|
|
' newval = val / 1.2;\n'\
|
|
|
|
' if(newval < 100) newval = 100;\n'\
|
|
|
|
' dmesg.style.width = newval+"%";\n'\
|
2017-02-09 21:27:43 +00:00
|
|
|
' zoombox.scrollLeft = ((left + sh) * newval / val) - sh;\n'\
|
2014-01-17 00:18:22 +00:00
|
|
|
' } else {\n'\
|
|
|
|
' zoombox.scrollLeft = 0;\n'\
|
|
|
|
' dmesg.style.width = "100%";\n'\
|
|
|
|
' }\n'\
|
2016-07-15 21:34:14 +00:00
|
|
|
' var tS = [10000, 5000, 2000, 1000, 500, 200, 100, 50, 20, 10, 5, 2, 1];\n'\
|
2014-01-17 00:18:22 +00:00
|
|
|
' var t0 = bounds[0];\n'\
|
|
|
|
' var tMax = bounds[1];\n'\
|
|
|
|
' var tTotal = tMax - t0;\n'\
|
|
|
|
' var wTotal = tTotal * 100.0 / newval;\n'\
|
2016-07-15 21:34:14 +00:00
|
|
|
' var idx = 7*window.innerWidth/1100;\n'\
|
|
|
|
' for(var i = 0; (i < tS.length)&&((wTotal / tS[i]) < idx); i++);\n'\
|
|
|
|
' if(i >= tS.length) i = tS.length - 1;\n'\
|
|
|
|
' if(tS[i] == resolution) return;\n'\
|
|
|
|
' resolution = tS[i];\n'\
|
|
|
|
' redrawTimescale(t0, tMax, tS[i]);\n'\
|
2014-01-17 00:18:22 +00:00
|
|
|
' }\n'\
|
2016-12-14 18:37:05 +00:00
|
|
|
' function deviceName(title) {\n'\
|
|
|
|
' var name = title.slice(0, title.indexOf(" ("));\n'\
|
|
|
|
' return name;\n'\
|
|
|
|
' }\n'\
|
2014-08-08 16:11:59 +00:00
|
|
|
' function deviceHover() {\n'\
|
2016-12-14 18:37:05 +00:00
|
|
|
' var name = deviceName(this.title);\n'\
|
2014-08-08 16:11:59 +00:00
|
|
|
' var dmesg = document.getElementById("dmesg");\n'\
|
|
|
|
' var dev = dmesg.getElementsByClassName("thread");\n'\
|
|
|
|
' var cpu = -1;\n'\
|
|
|
|
' if(name.match("CPU_ON\[[0-9]*\]"))\n'\
|
|
|
|
' cpu = parseInt(name.slice(7));\n'\
|
|
|
|
' else if(name.match("CPU_OFF\[[0-9]*\]"))\n'\
|
|
|
|
' cpu = parseInt(name.slice(8));\n'\
|
|
|
|
' for (var i = 0; i < dev.length; i++) {\n'\
|
2016-12-14 18:37:05 +00:00
|
|
|
' dname = deviceName(dev[i].title);\n'\
|
2016-07-15 21:34:14 +00:00
|
|
|
' var cname = dev[i].className.slice(dev[i].className.indexOf("thread"));\n'\
|
2014-08-08 16:11:59 +00:00
|
|
|
' if((cpu >= 0 && dname.match("CPU_O[NF]*\\\[*"+cpu+"\\\]")) ||\n'\
|
|
|
|
' (name == dname))\n'\
|
|
|
|
' {\n'\
|
2016-07-15 21:34:14 +00:00
|
|
|
' dev[i].className = "hover "+cname;\n'\
|
2014-08-08 16:11:59 +00:00
|
|
|
' } else {\n'\
|
2016-07-15 21:34:14 +00:00
|
|
|
' dev[i].className = cname;\n'\
|
2014-08-08 16:11:59 +00:00
|
|
|
' }\n'\
|
|
|
|
' }\n'\
|
|
|
|
' }\n'\
|
|
|
|
' function deviceUnhover() {\n'\
|
|
|
|
' var dmesg = document.getElementById("dmesg");\n'\
|
|
|
|
' var dev = dmesg.getElementsByClassName("thread");\n'\
|
|
|
|
' for (var i = 0; i < dev.length; i++) {\n'\
|
2016-07-15 21:34:14 +00:00
|
|
|
' dev[i].className = dev[i].className.slice(dev[i].className.indexOf("thread"));\n'\
|
2014-08-08 16:11:59 +00:00
|
|
|
' }\n'\
|
|
|
|
' }\n'\
|
|
|
|
' function deviceTitle(title, total, cpu) {\n'\
|
|
|
|
' var prefix = "Total";\n'\
|
|
|
|
' if(total.length > 3) {\n'\
|
|
|
|
' prefix = "Average";\n'\
|
|
|
|
' total[1] = (total[1]+total[3])/2;\n'\
|
|
|
|
' total[2] = (total[2]+total[4])/2;\n'\
|
|
|
|
' }\n'\
|
|
|
|
' var devtitle = document.getElementById("devicedetailtitle");\n'\
|
2016-12-14 18:37:05 +00:00
|
|
|
' var name = deviceName(title);\n'\
|
2014-08-08 16:11:59 +00:00
|
|
|
' if(cpu >= 0) name = "CPU"+cpu;\n'\
|
|
|
|
' var driver = "";\n'\
|
|
|
|
' var tS = "<t2>(</t2>";\n'\
|
|
|
|
' var tR = "<t2>)</t2>";\n'\
|
|
|
|
' if(total[1] > 0)\n'\
|
|
|
|
' tS = "<t2>("+prefix+" Suspend:</t2><t0> "+total[1].toFixed(3)+" ms</t0> ";\n'\
|
|
|
|
' if(total[2] > 0)\n'\
|
|
|
|
' tR = " <t2>"+prefix+" Resume:</t2><t0> "+total[2].toFixed(3)+" ms<t2>)</t2></t0>";\n'\
|
|
|
|
' var s = title.indexOf("{");\n'\
|
|
|
|
' var e = title.indexOf("}");\n'\
|
|
|
|
' if((s >= 0) && (e >= 0))\n'\
|
|
|
|
' driver = title.slice(s+1, e) + " <t1>@</t1> ";\n'\
|
|
|
|
' if(total[1] > 0 && total[2] > 0)\n'\
|
|
|
|
' devtitle.innerHTML = "<t0>"+driver+name+"</t0> "+tS+tR;\n'\
|
|
|
|
' else\n'\
|
|
|
|
' devtitle.innerHTML = "<t0>"+title+"</t0>";\n'\
|
|
|
|
' return name;\n'\
|
|
|
|
' }\n'\
|
2014-01-17 00:18:22 +00:00
|
|
|
' function deviceDetail() {\n'\
|
2014-08-08 16:11:59 +00:00
|
|
|
' var devinfo = document.getElementById("devicedetail");\n'\
|
|
|
|
' devinfo.style.display = "block";\n'\
|
2016-12-14 18:37:05 +00:00
|
|
|
' var name = deviceName(this.title);\n'\
|
2014-08-08 16:11:59 +00:00
|
|
|
' var cpu = -1;\n'\
|
|
|
|
' if(name.match("CPU_ON\[[0-9]*\]"))\n'\
|
|
|
|
' cpu = parseInt(name.slice(7));\n'\
|
|
|
|
' else if(name.match("CPU_OFF\[[0-9]*\]"))\n'\
|
|
|
|
' cpu = parseInt(name.slice(8));\n'\
|
|
|
|
' var dmesg = document.getElementById("dmesg");\n'\
|
|
|
|
' var dev = dmesg.getElementsByClassName("thread");\n'\
|
|
|
|
' var idlist = [];\n'\
|
|
|
|
' var pdata = [[]];\n'\
|
2016-07-15 21:34:14 +00:00
|
|
|
' if(document.getElementById("devicedetail1"))\n'\
|
|
|
|
' pdata = [[], []];\n'\
|
2014-08-08 16:11:59 +00:00
|
|
|
' var pd = pdata[0];\n'\
|
|
|
|
' var total = [0.0, 0.0, 0.0];\n'\
|
|
|
|
' for (var i = 0; i < dev.length; i++) {\n'\
|
2016-12-14 18:37:05 +00:00
|
|
|
' dname = deviceName(dev[i].title);\n'\
|
2014-08-08 16:11:59 +00:00
|
|
|
' if((cpu >= 0 && dname.match("CPU_O[NF]*\\\[*"+cpu+"\\\]")) ||\n'\
|
|
|
|
' (name == dname))\n'\
|
|
|
|
' {\n'\
|
|
|
|
' idlist[idlist.length] = dev[i].id;\n'\
|
|
|
|
' var tidx = 1;\n'\
|
|
|
|
' if(dev[i].id[0] == "a") {\n'\
|
|
|
|
' pd = pdata[0];\n'\
|
|
|
|
' } else {\n'\
|
|
|
|
' if(pdata.length == 1) pdata[1] = [];\n'\
|
|
|
|
' if(total.length == 3) total[3]=total[4]=0.0;\n'\
|
|
|
|
' pd = pdata[1];\n'\
|
|
|
|
' tidx = 3;\n'\
|
|
|
|
' }\n'\
|
|
|
|
' var info = dev[i].title.split(" ");\n'\
|
|
|
|
' var pname = info[info.length-1];\n'\
|
|
|
|
' pd[pname] = parseFloat(info[info.length-3].slice(1));\n'\
|
|
|
|
' total[0] += pd[pname];\n'\
|
|
|
|
' if(pname.indexOf("suspend") >= 0)\n'\
|
|
|
|
' total[tidx] += pd[pname];\n'\
|
|
|
|
' else\n'\
|
|
|
|
' total[tidx+1] += pd[pname];\n'\
|
|
|
|
' }\n'\
|
|
|
|
' }\n'\
|
|
|
|
' var devname = deviceTitle(this.title, total, cpu);\n'\
|
|
|
|
' var left = 0.0;\n'\
|
|
|
|
' for (var t = 0; t < pdata.length; t++) {\n'\
|
|
|
|
' pd = pdata[t];\n'\
|
|
|
|
' devinfo = document.getElementById("devicedetail"+t);\n'\
|
|
|
|
' var phases = devinfo.getElementsByClassName("phaselet");\n'\
|
|
|
|
' for (var i = 0; i < phases.length; i++) {\n'\
|
|
|
|
' if(phases[i].id in pd) {\n'\
|
|
|
|
' var w = 100.0*pd[phases[i].id]/total[0];\n'\
|
|
|
|
' var fs = 32;\n'\
|
|
|
|
' if(w < 8) fs = 4*w | 0;\n'\
|
|
|
|
' var fs2 = fs*3/4;\n'\
|
|
|
|
' phases[i].style.width = w+"%";\n'\
|
|
|
|
' phases[i].style.left = left+"%";\n'\
|
|
|
|
' phases[i].title = phases[i].id+" "+pd[phases[i].id]+" ms";\n'\
|
|
|
|
' left += w;\n'\
|
|
|
|
' var time = "<t4 style=\\"font-size:"+fs+"px\\">"+pd[phases[i].id]+" ms<br></t4>";\n'\
|
2016-12-14 18:37:05 +00:00
|
|
|
' var pname = "<t3 style=\\"font-size:"+fs2+"px\\">"+phases[i].id.replace(new RegExp("_", "g"), " ")+"</t3>";\n'\
|
2014-08-08 16:11:59 +00:00
|
|
|
' phases[i].innerHTML = time+pname;\n'\
|
|
|
|
' } else {\n'\
|
|
|
|
' phases[i].style.width = "0%";\n'\
|
|
|
|
' phases[i].style.left = left+"%";\n'\
|
|
|
|
' }\n'\
|
|
|
|
' }\n'\
|
|
|
|
' }\n'\
|
2017-04-07 18:05:35 +00:00
|
|
|
' if(typeof devstats !== \'undefined\')\n'\
|
|
|
|
' callDetail(this.id, this.title);\n'\
|
2014-01-17 00:18:22 +00:00
|
|
|
' var cglist = document.getElementById("callgraphs");\n'\
|
|
|
|
' if(!cglist) return;\n'\
|
|
|
|
' var cg = cglist.getElementsByClassName("atop");\n'\
|
2016-07-15 21:34:14 +00:00
|
|
|
' if(cg.length < 10) return;\n'\
|
2014-01-17 00:18:22 +00:00
|
|
|
' for (var i = 0; i < cg.length; i++) {\n'\
|
2017-04-07 18:05:35 +00:00
|
|
|
' cgid = cg[i].id.split("x")[0]\n'\
|
|
|
|
' if(idlist.indexOf(cgid) >= 0) {\n'\
|
|
|
|
' cg[i].style.display = "block";\n'\
|
|
|
|
' } else {\n'\
|
|
|
|
' cg[i].style.display = "none";\n'\
|
|
|
|
' }\n'\
|
|
|
|
' }\n'\
|
|
|
|
' }\n'\
|
|
|
|
' function callDetail(devid, devtitle) {\n'\
|
|
|
|
' if(!(devid in devstats) || devstats[devid].length < 1)\n'\
|
|
|
|
' return;\n'\
|
|
|
|
' var list = devstats[devid];\n'\
|
|
|
|
' var tmp = devtitle.split(" ");\n'\
|
|
|
|
' var name = tmp[0], phase = tmp[tmp.length-1];\n'\
|
|
|
|
' var dd = document.getElementById(phase);\n'\
|
|
|
|
' var total = parseFloat(tmp[1].slice(1));\n'\
|
|
|
|
' var mlist = [];\n'\
|
|
|
|
' var maxlen = 0;\n'\
|
|
|
|
' var info = []\n'\
|
|
|
|
' for(var i in list) {\n'\
|
|
|
|
' if(list[i][0] == "@") {\n'\
|
|
|
|
' info = list[i].split("|");\n'\
|
|
|
|
' continue;\n'\
|
|
|
|
' }\n'\
|
|
|
|
' var tmp = list[i].split("|");\n'\
|
|
|
|
' var t = parseFloat(tmp[0]), f = tmp[1], c = parseInt(tmp[2]);\n'\
|
|
|
|
' var p = (t*100.0/total).toFixed(2);\n'\
|
|
|
|
' mlist[mlist.length] = [f, c, t.toFixed(2), p+"%"];\n'\
|
|
|
|
' if(f.length > maxlen)\n'\
|
|
|
|
' maxlen = f.length;\n'\
|
|
|
|
' }\n'\
|
|
|
|
' var pad = 5;\n'\
|
|
|
|
' if(mlist.length == 0) pad = 30;\n'\
|
|
|
|
' var html = \'<div style="padding-top:\'+pad+\'px"><t3> <b>\'+name+\':</b>\';\n'\
|
|
|
|
' if(info.length > 2)\n'\
|
|
|
|
' html += " start=<b>"+info[1]+"</b>, end=<b>"+info[2]+"</b>";\n'\
|
|
|
|
' if(info.length > 3)\n'\
|
|
|
|
' html += ", length<i>(w/o overhead)</i>=<b>"+info[3]+" ms</b>";\n'\
|
|
|
|
' if(info.length > 4)\n'\
|
|
|
|
' html += ", return=<b>"+info[4]+"</b>";\n'\
|
|
|
|
' html += "</t3></div>";\n'\
|
|
|
|
' if(mlist.length > 0) {\n'\
|
|
|
|
' html += \'<table class=fstat style="padding-top:\'+(maxlen*5)+\'px;"><tr><th>Function</th>\';\n'\
|
|
|
|
' for(var i in mlist)\n'\
|
|
|
|
' html += "<td class=vt>"+mlist[i][0]+"</td>";\n'\
|
|
|
|
' html += "</tr><tr><th>Calls</th>";\n'\
|
|
|
|
' for(var i in mlist)\n'\
|
|
|
|
' html += "<td>"+mlist[i][1]+"</td>";\n'\
|
|
|
|
' html += "</tr><tr><th>Time(ms)</th>";\n'\
|
|
|
|
' for(var i in mlist)\n'\
|
|
|
|
' html += "<td>"+mlist[i][2]+"</td>";\n'\
|
|
|
|
' html += "</tr><tr><th>Percent</th>";\n'\
|
|
|
|
' for(var i in mlist)\n'\
|
|
|
|
' html += "<td>"+mlist[i][3]+"</td>";\n'\
|
|
|
|
' html += "</tr></table>";\n'\
|
|
|
|
' }\n'\
|
|
|
|
' dd.innerHTML = html;\n'\
|
|
|
|
' var height = (maxlen*5)+100;\n'\
|
|
|
|
' dd.style.height = height+"px";\n'\
|
|
|
|
' document.getElementById("devicedetail").style.height = height+"px";\n'\
|
|
|
|
' }\n'\
|
|
|
|
' function callSelect() {\n'\
|
|
|
|
' var cglist = document.getElementById("callgraphs");\n'\
|
|
|
|
' if(!cglist) return;\n'\
|
|
|
|
' var cg = cglist.getElementsByClassName("atop");\n'\
|
|
|
|
' for (var i = 0; i < cg.length; i++) {\n'\
|
|
|
|
' if(this.id == cg[i].id) {\n'\
|
2014-01-17 00:18:22 +00:00
|
|
|
' cg[i].style.display = "block";\n'\
|
|
|
|
' } else {\n'\
|
|
|
|
' cg[i].style.display = "none";\n'\
|
|
|
|
' }\n'\
|
|
|
|
' }\n'\
|
|
|
|
' }\n'\
|
2014-08-08 16:11:59 +00:00
|
|
|
' function devListWindow(e) {\n'\
|
2016-12-14 18:37:07 +00:00
|
|
|
' var win = window.open();\n'\
|
2014-08-08 16:11:59 +00:00
|
|
|
' var html = "<title>"+e.target.innerHTML+"</title>"+\n'\
|
|
|
|
' "<style type=\\"text/css\\">"+\n'\
|
|
|
|
' " ul {list-style-type:circle;padding-left:10px;margin-left:10px;}"+\n'\
|
|
|
|
' "</style>"\n'\
|
|
|
|
' var dt = devtable[0];\n'\
|
|
|
|
' if(e.target.id != "devlist1")\n'\
|
|
|
|
' dt = devtable[1];\n'\
|
|
|
|
' win.document.write(html+dt);\n'\
|
|
|
|
' }\n'\
|
2016-12-14 18:37:07 +00:00
|
|
|
' function errWindow() {\n'\
|
2018-01-30 08:17:20 +00:00
|
|
|
' var range = this.id.split("_");\n'\
|
|
|
|
' var idx1 = parseInt(range[0]);\n'\
|
|
|
|
' var idx2 = parseInt(range[1]);\n'\
|
2016-12-14 18:37:07 +00:00
|
|
|
' var win = window.open();\n'\
|
2018-01-30 08:17:20 +00:00
|
|
|
' var log = document.getElementById("dmesglog");\n'\
|
|
|
|
' var title = "<title>dmesg log</title>";\n'\
|
|
|
|
' var text = log.innerHTML.split("\\n");\n'\
|
|
|
|
' var html = "";\n'\
|
|
|
|
' for(var i = 0; i < text.length; i++) {\n'\
|
|
|
|
' if(i == idx1) {\n'\
|
|
|
|
' html += "<e id=target>"+text[i]+"</e>\\n";\n'\
|
|
|
|
' } else if(i > idx1 && i <= idx2) {\n'\
|
|
|
|
' html += "<e>"+text[i]+"</e>\\n";\n'\
|
|
|
|
' } else {\n'\
|
|
|
|
' html += text[i]+"\\n";\n'\
|
|
|
|
' }\n'\
|
|
|
|
' }\n'\
|
|
|
|
' win.document.write("<style>e{color:red}</style>"+title+"<pre>"+html+"</pre>");\n'\
|
|
|
|
' win.location.hash = "#target";\n'\
|
2016-12-14 18:37:07 +00:00
|
|
|
' win.document.close();\n'\
|
|
|
|
' }\n'\
|
2016-07-15 21:34:14 +00:00
|
|
|
' function logWindow(e) {\n'\
|
|
|
|
' var name = e.target.id.slice(4);\n'\
|
|
|
|
' var win = window.open();\n'\
|
|
|
|
' var log = document.getElementById(name+"log");\n'\
|
|
|
|
' var title = "<title>"+document.title.split(" ")[0]+" "+name+" log</title>";\n'\
|
|
|
|
' win.document.write(title+"<pre>"+log.innerHTML+"</pre>");\n'\
|
|
|
|
' win.document.close();\n'\
|
|
|
|
' }\n'\
|
2016-12-14 18:37:05 +00:00
|
|
|
' function onMouseDown(e) {\n'\
|
|
|
|
' dragval[0] = e.clientX;\n'\
|
|
|
|
' dragval[1] = document.getElementById("dmesgzoombox").scrollLeft;\n'\
|
|
|
|
' document.onmousemove = onMouseMove;\n'\
|
|
|
|
' }\n'\
|
|
|
|
' function onMouseMove(e) {\n'\
|
|
|
|
' var zoombox = document.getElementById("dmesgzoombox");\n'\
|
|
|
|
' zoombox.scrollLeft = dragval[1] + dragval[0] - e.clientX;\n'\
|
|
|
|
' }\n'\
|
|
|
|
' function onMouseUp(e) {\n'\
|
|
|
|
' document.onmousemove = null;\n'\
|
|
|
|
' }\n'\
|
|
|
|
' function onKeyPress(e) {\n'\
|
|
|
|
' var c = e.charCode;\n'\
|
|
|
|
' if(c != 42 && c != 43 && c != 45) return;\n'\
|
|
|
|
' var click = document.createEvent("Events");\n'\
|
|
|
|
' click.initEvent("click", true, false);\n'\
|
|
|
|
' if(c == 43) \n'\
|
|
|
|
' document.getElementById("zoomin").dispatchEvent(click);\n'\
|
|
|
|
' else if(c == 45)\n'\
|
|
|
|
' document.getElementById("zoomout").dispatchEvent(click);\n'\
|
|
|
|
' else if(c == 42)\n'\
|
|
|
|
' document.getElementById("zoomdef").dispatchEvent(click);\n'\
|
|
|
|
' }\n'\
|
2016-07-15 21:34:14 +00:00
|
|
|
' window.addEventListener("resize", function () {zoomTimeline();});\n'\
|
2014-01-17 00:18:22 +00:00
|
|
|
' window.addEventListener("load", function () {\n'\
|
|
|
|
' var dmesg = document.getElementById("dmesg");\n'\
|
|
|
|
' dmesg.style.width = "100%"\n'\
|
2017-02-09 21:27:43 +00:00
|
|
|
' dmesg.onmousedown = onMouseDown;\n'\
|
2016-12-14 18:37:05 +00:00
|
|
|
' document.onmouseup = onMouseUp;\n'\
|
|
|
|
' document.onkeypress = onKeyPress;\n'\
|
2014-01-17 00:18:22 +00:00
|
|
|
' document.getElementById("zoomin").onclick = zoomTimeline;\n'\
|
|
|
|
' document.getElementById("zoomout").onclick = zoomTimeline;\n'\
|
|
|
|
' document.getElementById("zoomdef").onclick = zoomTimeline;\n'\
|
2016-12-14 18:37:07 +00:00
|
|
|
' var list = document.getElementsByClassName("err");\n'\
|
|
|
|
' for (var i = 0; i < list.length; i++)\n'\
|
|
|
|
' list[i].onclick = errWindow;\n'\
|
2016-07-15 21:34:14 +00:00
|
|
|
' var list = document.getElementsByClassName("logbtn");\n'\
|
|
|
|
' for (var i = 0; i < list.length; i++)\n'\
|
|
|
|
' list[i].onclick = logWindow;\n'\
|
|
|
|
' list = document.getElementsByClassName("devlist");\n'\
|
|
|
|
' for (var i = 0; i < list.length; i++)\n'\
|
|
|
|
' list[i].onclick = devListWindow;\n'\
|
2014-01-17 00:18:22 +00:00
|
|
|
' var dev = dmesg.getElementsByClassName("thread");\n'\
|
|
|
|
' for (var i = 0; i < dev.length; i++) {\n'\
|
|
|
|
' dev[i].onclick = deviceDetail;\n'\
|
2014-08-08 16:11:59 +00:00
|
|
|
' dev[i].onmouseover = deviceHover;\n'\
|
|
|
|
' dev[i].onmouseout = deviceUnhover;\n'\
|
2014-01-17 00:18:22 +00:00
|
|
|
' }\n'\
|
2017-04-07 18:05:35 +00:00
|
|
|
' var dev = dmesg.getElementsByClassName("srccall");\n'\
|
|
|
|
' for (var i = 0; i < dev.length; i++)\n'\
|
|
|
|
' dev[i].onclick = callSelect;\n'\
|
2014-01-17 00:18:22 +00:00
|
|
|
' zoomTimeline();\n'\
|
|
|
|
' });\n'\
|
|
|
|
'</script>\n'
|
|
|
|
hf.write(script_code);
|
|
|
|
|
|
|
|
# Function: executeSuspend
|
|
|
|
# Description:
|
2014-08-08 16:11:59 +00:00
|
|
|
# Execute system suspend through the sysfs interface, then copy the output
|
|
|
|
# dmesg and ftrace files to the test output directory.
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
def executeSuspend(quiet=False):
|
2020-11-11 02:36:17 +00:00
|
|
|
sv, tp, pm = sysvals, sysvals.tpath, ProcessMonitor()
|
|
|
|
if sv.wifi:
|
|
|
|
wifi = sv.checkWifi()
|
|
|
|
sv.dlog('wifi check, connected device is "%s"' % wifi)
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
testdata = []
|
2018-01-30 08:17:20 +00:00
|
|
|
# run these commands to prepare the system for suspend
|
2020-11-11 02:36:17 +00:00
|
|
|
if sv.display:
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
if not quiet:
|
2020-11-11 02:36:17 +00:00
|
|
|
pprint('SET DISPLAY TO %s' % sv.display.upper())
|
|
|
|
ret = sv.displayControl(sv.display)
|
|
|
|
sv.dlog('xset display %s, ret = %d' % (sv.display, ret))
|
2018-01-30 08:17:20 +00:00
|
|
|
time.sleep(1)
|
2020-11-11 02:36:17 +00:00
|
|
|
if sv.sync:
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
if not quiet:
|
|
|
|
pprint('SYNCING FILESYSTEMS')
|
2020-11-11 02:36:17 +00:00
|
|
|
sv.dlog('syncing filesystems')
|
2018-01-30 08:17:20 +00:00
|
|
|
call('sync', shell=True)
|
2020-11-11 02:36:17 +00:00
|
|
|
sv.dlog('read dmesg')
|
|
|
|
sv.initdmesg()
|
2016-07-15 21:34:14 +00:00
|
|
|
# start ftrace
|
2020-11-11 02:36:17 +00:00
|
|
|
if(sv.usecallgraph or sv.usetraceevents):
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
if not quiet:
|
|
|
|
pprint('START TRACING')
|
2020-11-11 02:36:17 +00:00
|
|
|
sv.dlog('start ftrace tracing')
|
|
|
|
sv.fsetVal('1', 'tracing_on')
|
|
|
|
if sv.useprocmon:
|
|
|
|
sv.dlog('start the process monitor')
|
2016-12-14 18:37:05 +00:00
|
|
|
pm.start()
|
2020-11-11 02:36:17 +00:00
|
|
|
sv.dlog('run the cmdinfo list before')
|
|
|
|
sv.cmdinfo(True)
|
2014-08-08 16:11:59 +00:00
|
|
|
# execute however many s/r runs requested
|
2020-11-11 02:36:17 +00:00
|
|
|
for count in range(1,sv.execcount+1):
|
2016-12-14 18:37:05 +00:00
|
|
|
# x2delay in between test runs
|
2020-11-11 02:36:17 +00:00
|
|
|
if(count > 1 and sv.x2delay > 0):
|
|
|
|
sv.fsetVal('WAIT %d' % sv.x2delay, 'trace_marker')
|
|
|
|
time.sleep(sv.x2delay/1000.0)
|
|
|
|
sv.fsetVal('WAIT END', 'trace_marker')
|
2016-12-14 18:37:05 +00:00
|
|
|
# start message
|
2020-11-11 02:36:17 +00:00
|
|
|
if sv.testcommand != '':
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint('COMMAND START')
|
2014-08-08 16:11:59 +00:00
|
|
|
else:
|
2020-11-11 02:36:17 +00:00
|
|
|
if(sv.rtcwake):
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint('SUSPEND START')
|
2016-07-15 21:34:14 +00:00
|
|
|
else:
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint('SUSPEND START (press a key to resume)')
|
2016-12-14 18:37:05 +00:00
|
|
|
# set rtcwake
|
2020-11-11 02:36:17 +00:00
|
|
|
if(sv.rtcwake):
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
if not quiet:
|
2020-11-11 02:36:17 +00:00
|
|
|
pprint('will issue an rtcwake in %d seconds' % sv.rtcwaketime)
|
|
|
|
sv.dlog('enable RTC wake alarm')
|
|
|
|
sv.rtcWakeAlarmOn()
|
2016-12-14 18:37:05 +00:00
|
|
|
# start of suspend trace marker
|
2020-11-11 02:36:17 +00:00
|
|
|
if(sv.usecallgraph or sv.usetraceevents):
|
|
|
|
sv.fsetVal(datetime.now().strftime(sv.tmstart), 'trace_marker')
|
2016-12-14 18:37:05 +00:00
|
|
|
# predelay delay
|
2020-11-11 02:36:17 +00:00
|
|
|
if(count == 1 and sv.predelay > 0):
|
|
|
|
sv.fsetVal('WAIT %d' % sv.predelay, 'trace_marker')
|
|
|
|
time.sleep(sv.predelay/1000.0)
|
|
|
|
sv.fsetVal('WAIT END', 'trace_marker')
|
2016-12-14 18:37:05 +00:00
|
|
|
# initiate suspend or command
|
2020-11-11 02:36:17 +00:00
|
|
|
sv.dlog('system executing a suspend')
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
tdata = {'error': ''}
|
2020-11-11 02:36:17 +00:00
|
|
|
if sv.testcommand != '':
|
|
|
|
res = call(sv.testcommand+' 2>&1', shell=True);
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
if res != 0:
|
|
|
|
tdata['error'] = 'cmd returned %d' % res
|
2016-12-14 18:37:05 +00:00
|
|
|
else:
|
2020-11-11 02:36:17 +00:00
|
|
|
mode = sv.suspendmode
|
|
|
|
if sv.memmode and os.path.exists(sv.mempowerfile):
|
2017-07-05 21:42:55 +00:00
|
|
|
mode = 'mem'
|
2020-11-11 02:36:17 +00:00
|
|
|
sv.testVal(sv.mempowerfile, 'radio', sv.memmode)
|
|
|
|
if sv.diskmode and os.path.exists(sv.diskpowerfile):
|
2018-10-08 22:56:32 +00:00
|
|
|
mode = 'disk'
|
2020-11-11 02:36:17 +00:00
|
|
|
sv.testVal(sv.diskpowerfile, 'radio', sv.diskmode)
|
|
|
|
if sv.acpidebug:
|
|
|
|
sv.testVal(sv.acpipath, 'acpi', '0xe')
|
|
|
|
if mode == 'freeze' and sv.haveTurbostat():
|
2019-05-14 17:53:57 +00:00
|
|
|
# execution will pause here
|
2020-11-11 02:36:17 +00:00
|
|
|
turbo = sv.turbostat()
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
if turbo:
|
2019-05-14 17:53:57 +00:00
|
|
|
tdata['turbo'] = turbo
|
|
|
|
else:
|
2020-11-11 02:36:17 +00:00
|
|
|
pf = open(sv.powerfile, 'w')
|
2019-05-14 17:53:57 +00:00
|
|
|
pf.write(mode)
|
|
|
|
# execution will pause here
|
|
|
|
try:
|
|
|
|
pf.close()
|
|
|
|
except Exception as e:
|
|
|
|
tdata['error'] = str(e)
|
2020-11-11 02:36:17 +00:00
|
|
|
sv.dlog('system returned from resume')
|
|
|
|
# reset everything
|
|
|
|
sv.testVal('restoreall')
|
|
|
|
if(sv.rtcwake):
|
|
|
|
sv.dlog('disable RTC wake alarm')
|
|
|
|
sv.rtcWakeAlarmOff()
|
2016-12-14 18:37:05 +00:00
|
|
|
# postdelay delay
|
2020-11-11 02:36:17 +00:00
|
|
|
if(count == sv.execcount and sv.postdelay > 0):
|
|
|
|
sv.fsetVal('WAIT %d' % sv.postdelay, 'trace_marker')
|
|
|
|
time.sleep(sv.postdelay/1000.0)
|
|
|
|
sv.fsetVal('WAIT END', 'trace_marker')
|
2014-08-08 16:11:59 +00:00
|
|
|
# return from suspend
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint('RESUME COMPLETE')
|
2020-11-11 02:36:17 +00:00
|
|
|
if(sv.usecallgraph or sv.usetraceevents):
|
|
|
|
sv.fsetVal(datetime.now().strftime(sv.tmend), 'trace_marker')
|
|
|
|
if sv.wifi and wifi:
|
|
|
|
tdata['wifi'] = sv.pollWifi(wifi)
|
|
|
|
sv.dlog('wifi check, %s' % tdata['wifi'])
|
|
|
|
if(sv.suspendmode == 'mem' or sv.suspendmode == 'command'):
|
|
|
|
sv.dlog('read the ACPI FPDT')
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
tdata['fw'] = getFPDT(False)
|
|
|
|
testdata.append(tdata)
|
2020-11-11 02:36:17 +00:00
|
|
|
sv.dlog('run the cmdinfo list after')
|
|
|
|
cmdafter = sv.cmdinfo(False)
|
2016-07-15 21:34:14 +00:00
|
|
|
# stop ftrace
|
2020-11-11 02:36:17 +00:00
|
|
|
if(sv.usecallgraph or sv.usetraceevents):
|
|
|
|
if sv.useprocmon:
|
|
|
|
sv.dlog('stop the process monitor')
|
2016-12-14 18:37:05 +00:00
|
|
|
pm.stop()
|
2020-11-11 02:36:17 +00:00
|
|
|
sv.fsetVal('0', 'tracing_on')
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
# grab a copy of the dmesg output
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
if not quiet:
|
|
|
|
pprint('CAPTURING DMESG')
|
2020-11-11 02:36:17 +00:00
|
|
|
sysvals.dlog('EXECUTION TRACE END')
|
|
|
|
sv.getdmesg(testdata)
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
# grab a copy of the ftrace output
|
2020-11-11 02:36:17 +00:00
|
|
|
if(sv.usecallgraph or sv.usetraceevents):
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
if not quiet:
|
|
|
|
pprint('CAPTURING TRACE')
|
2020-11-11 02:36:17 +00:00
|
|
|
op = sv.writeDatafileHeader(sv.ftracefile, testdata)
|
2018-01-30 08:17:20 +00:00
|
|
|
fp = open(tp+'trace', 'r')
|
|
|
|
for line in fp:
|
|
|
|
op.write(line)
|
|
|
|
op.close()
|
2020-11-11 02:36:17 +00:00
|
|
|
sv.fsetVal('', 'trace')
|
|
|
|
sv.platforminfo(cmdafter)
|
2016-07-15 21:34:14 +00:00
|
|
|
|
2018-01-30 08:17:20 +00:00
|
|
|
def readFile(file):
|
|
|
|
if os.path.islink(file):
|
|
|
|
return os.readlink(file).split('/')[-1]
|
|
|
|
else:
|
|
|
|
return sysvals.getVal(file).strip()
|
2014-08-08 16:11:59 +00:00
|
|
|
|
|
|
|
# Function: ms2nice
|
|
|
|
# Description:
|
|
|
|
# Print out a very concise time string in minutes and seconds
|
|
|
|
# Output:
|
|
|
|
# The time string, e.g. "1901m16s"
|
|
|
|
def ms2nice(val):
|
2018-01-30 08:17:20 +00:00
|
|
|
val = int(val)
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
h = val // 3600000
|
|
|
|
m = (val // 60000) % 60
|
|
|
|
s = (val // 1000) % 60
|
2018-01-30 08:17:20 +00:00
|
|
|
if h > 0:
|
|
|
|
return '%d:%02d:%02d' % (h, m, s)
|
|
|
|
if m > 0:
|
|
|
|
return '%02d:%02d' % (m, s)
|
|
|
|
return '%ds' % s
|
2014-01-17 00:18:22 +00:00
|
|
|
|
2018-01-30 08:17:20 +00:00
|
|
|
def yesno(val):
|
|
|
|
list = {'enabled':'A', 'disabled':'S', 'auto':'E', 'on':'D',
|
|
|
|
'active':'A', 'suspended':'S', 'suspending':'S'}
|
|
|
|
if val not in list:
|
|
|
|
return ' '
|
|
|
|
return list[val]
|
|
|
|
|
|
|
|
# Function: deviceInfo
|
2014-01-17 00:18:22 +00:00
|
|
|
# Description:
|
2014-08-08 16:11:59 +00:00
|
|
|
# Detect all the USB hosts and devices currently connected and add
|
|
|
|
# a list of USB device names to sysvals for better timeline readability
|
2018-01-30 08:17:20 +00:00
|
|
|
def deviceInfo(output=''):
|
|
|
|
if not output:
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint('LEGEND\n'\
|
|
|
|
'---------------------------------------------------------------------------------------------\n'\
|
|
|
|
' A = async/sync PM queue (A/S) C = runtime active children\n'\
|
|
|
|
' R = runtime suspend enabled/disabled (E/D) rACTIVE = runtime active (min/sec)\n'\
|
|
|
|
' S = runtime status active/suspended (A/S) rSUSPEND = runtime suspend (min/sec)\n'\
|
|
|
|
' U = runtime usage count\n'\
|
|
|
|
'---------------------------------------------------------------------------------------------\n'\
|
|
|
|
'DEVICE NAME A R S U C rACTIVE rSUSPEND\n'\
|
|
|
|
'---------------------------------------------------------------------------------------------')
|
2018-01-30 08:17:20 +00:00
|
|
|
|
|
|
|
res = []
|
|
|
|
tgtval = 'runtime_status'
|
|
|
|
lines = dict()
|
2014-08-08 16:11:59 +00:00
|
|
|
for dirname, dirnames, filenames in os.walk('/sys/devices'):
|
2018-01-30 08:17:20 +00:00
|
|
|
if(not re.match('.*/power', dirname) or
|
|
|
|
'control' not in filenames or
|
|
|
|
tgtval not in filenames):
|
|
|
|
continue
|
|
|
|
name = ''
|
|
|
|
dirname = dirname[:-6]
|
|
|
|
device = dirname.split('/')[-1]
|
|
|
|
power = dict()
|
|
|
|
power[tgtval] = readFile('%s/power/%s' % (dirname, tgtval))
|
|
|
|
# only list devices which support runtime suspend
|
|
|
|
if power[tgtval] not in ['active', 'suspended', 'suspending']:
|
|
|
|
continue
|
|
|
|
for i in ['product', 'driver', 'subsystem']:
|
|
|
|
file = '%s/%s' % (dirname, i)
|
|
|
|
if os.path.exists(file):
|
|
|
|
name = readFile(file)
|
|
|
|
break
|
|
|
|
for i in ['async', 'control', 'runtime_status', 'runtime_usage',
|
|
|
|
'runtime_active_kids', 'runtime_active_time',
|
|
|
|
'runtime_suspended_time']:
|
|
|
|
if i in filenames:
|
|
|
|
power[i] = readFile('%s/power/%s' % (dirname, i))
|
|
|
|
if output:
|
|
|
|
if power['control'] == output:
|
|
|
|
res.append('%s/power/control' % dirname)
|
|
|
|
continue
|
|
|
|
lines[dirname] = '%-26s %-26s %1s %1s %1s %1s %1s %10s %10s' % \
|
|
|
|
(device[:26], name[:26],
|
|
|
|
yesno(power['async']), \
|
|
|
|
yesno(power['control']), \
|
|
|
|
yesno(power['runtime_status']), \
|
|
|
|
power['runtime_usage'], \
|
|
|
|
power['runtime_active_kids'], \
|
|
|
|
ms2nice(power['runtime_active_time']), \
|
|
|
|
ms2nice(power['runtime_suspended_time']))
|
|
|
|
for i in sorted(lines):
|
2019-05-14 17:53:58 +00:00
|
|
|
print(lines[i])
|
2018-01-30 08:17:20 +00:00
|
|
|
return res
|
2016-07-15 21:34:14 +00:00
|
|
|
|
2014-08-08 16:11:59 +00:00
|
|
|
# Function: getModes
|
|
|
|
# Description:
|
|
|
|
# Determine the supported power modes on this system
|
|
|
|
# Output:
|
|
|
|
# A string list of the available modes
|
2014-01-17 00:18:22 +00:00
|
|
|
def getModes():
|
2017-07-05 21:42:55 +00:00
|
|
|
modes = []
|
2016-07-15 21:34:14 +00:00
|
|
|
if(os.path.exists(sysvals.powerfile)):
|
|
|
|
fp = open(sysvals.powerfile, 'r')
|
2019-05-14 17:53:58 +00:00
|
|
|
modes = fp.read().split()
|
2016-07-15 21:34:14 +00:00
|
|
|
fp.close()
|
2017-07-05 21:42:55 +00:00
|
|
|
if(os.path.exists(sysvals.mempowerfile)):
|
|
|
|
deep = False
|
|
|
|
fp = open(sysvals.mempowerfile, 'r')
|
2019-05-14 17:53:58 +00:00
|
|
|
for m in fp.read().split():
|
2017-07-05 21:42:55 +00:00
|
|
|
memmode = m.strip('[]')
|
|
|
|
if memmode == 'deep':
|
|
|
|
deep = True
|
|
|
|
else:
|
|
|
|
modes.append('mem-%s' % memmode)
|
|
|
|
fp.close()
|
|
|
|
if 'mem' in modes and not deep:
|
|
|
|
modes.remove('mem')
|
2018-10-08 22:56:32 +00:00
|
|
|
if('disk' in modes and os.path.exists(sysvals.diskpowerfile)):
|
|
|
|
fp = open(sysvals.diskpowerfile, 'r')
|
2019-05-14 17:53:58 +00:00
|
|
|
for m in fp.read().split():
|
2018-10-08 22:56:32 +00:00
|
|
|
modes.append('disk-%s' % m.strip('[]'))
|
|
|
|
fp.close()
|
2014-01-17 00:18:22 +00:00
|
|
|
return modes
|
|
|
|
|
2017-07-05 21:42:55 +00:00
|
|
|
# Function: dmidecode
|
|
|
|
# Description:
|
|
|
|
# Read the bios tables and pull out system info
|
|
|
|
# Arguments:
|
|
|
|
# mempath: /dev/mem or custom mem path
|
|
|
|
# fatal: True to exit on error, False to return empty dict
|
|
|
|
# Output:
|
|
|
|
# A dict object with all available key/values
|
|
|
|
def dmidecode(mempath, fatal=False):
|
|
|
|
out = dict()
|
|
|
|
|
|
|
|
# the list of values to retrieve, with hardcoded (type, idx)
|
|
|
|
info = {
|
|
|
|
'bios-vendor': (0, 4),
|
|
|
|
'bios-version': (0, 5),
|
|
|
|
'bios-release-date': (0, 8),
|
|
|
|
'system-manufacturer': (1, 4),
|
|
|
|
'system-product-name': (1, 5),
|
|
|
|
'system-version': (1, 6),
|
|
|
|
'system-serial-number': (1, 7),
|
|
|
|
'baseboard-manufacturer': (2, 4),
|
|
|
|
'baseboard-product-name': (2, 5),
|
|
|
|
'baseboard-version': (2, 6),
|
|
|
|
'baseboard-serial-number': (2, 7),
|
|
|
|
'chassis-manufacturer': (3, 4),
|
|
|
|
'chassis-type': (3, 5),
|
|
|
|
'chassis-version': (3, 6),
|
|
|
|
'chassis-serial-number': (3, 7),
|
|
|
|
'processor-manufacturer': (4, 7),
|
|
|
|
'processor-version': (4, 16),
|
|
|
|
}
|
|
|
|
if(not os.path.exists(mempath)):
|
|
|
|
if(fatal):
|
|
|
|
doError('file does not exist: %s' % mempath)
|
|
|
|
return out
|
|
|
|
if(not os.access(mempath, os.R_OK)):
|
|
|
|
if(fatal):
|
|
|
|
doError('file is not readable: %s' % mempath)
|
|
|
|
return out
|
|
|
|
|
|
|
|
# by default use legacy scan, but try to use EFI first
|
|
|
|
memaddr = 0xf0000
|
|
|
|
memsize = 0x10000
|
|
|
|
for ep in ['/sys/firmware/efi/systab', '/proc/efi/systab']:
|
|
|
|
if not os.path.exists(ep) or not os.access(ep, os.R_OK):
|
|
|
|
continue
|
|
|
|
fp = open(ep, 'r')
|
|
|
|
buf = fp.read()
|
|
|
|
fp.close()
|
|
|
|
i = buf.find('SMBIOS=')
|
|
|
|
if i >= 0:
|
|
|
|
try:
|
|
|
|
memaddr = int(buf[i+7:], 16)
|
|
|
|
memsize = 0x20
|
|
|
|
except:
|
|
|
|
continue
|
|
|
|
|
|
|
|
# read in the memory for scanning
|
|
|
|
try:
|
2019-05-14 17:53:58 +00:00
|
|
|
fp = open(mempath, 'rb')
|
2017-07-05 21:42:55 +00:00
|
|
|
fp.seek(memaddr)
|
|
|
|
buf = fp.read(memsize)
|
|
|
|
except:
|
|
|
|
if(fatal):
|
|
|
|
doError('DMI table is unreachable, sorry')
|
|
|
|
else:
|
2019-05-14 17:53:58 +00:00
|
|
|
pprint('WARNING: /dev/mem is not readable, ignoring DMI data')
|
2017-07-05 21:42:55 +00:00
|
|
|
return out
|
|
|
|
fp.close()
|
|
|
|
|
|
|
|
# search for either an SM table or DMI table
|
|
|
|
i = base = length = num = 0
|
|
|
|
while(i < memsize):
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
if buf[i:i+4] == b'_SM_' and i < memsize - 16:
|
2017-07-05 21:42:55 +00:00
|
|
|
length = struct.unpack('H', buf[i+22:i+24])[0]
|
|
|
|
base, num = struct.unpack('IH', buf[i+24:i+30])
|
|
|
|
break
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
elif buf[i:i+5] == b'_DMI_':
|
2017-07-05 21:42:55 +00:00
|
|
|
length = struct.unpack('H', buf[i+6:i+8])[0]
|
|
|
|
base, num = struct.unpack('IH', buf[i+8:i+14])
|
|
|
|
break
|
|
|
|
i += 16
|
|
|
|
if base == 0 and length == 0 and num == 0:
|
|
|
|
if(fatal):
|
|
|
|
doError('Neither SMBIOS nor DMI were found')
|
|
|
|
else:
|
|
|
|
return out
|
|
|
|
|
|
|
|
# read in the SM or DMI table
|
|
|
|
try:
|
2019-05-14 17:53:58 +00:00
|
|
|
fp = open(mempath, 'rb')
|
2017-07-05 21:42:55 +00:00
|
|
|
fp.seek(base)
|
|
|
|
buf = fp.read(length)
|
|
|
|
except:
|
|
|
|
if(fatal):
|
|
|
|
doError('DMI table is unreachable, sorry')
|
|
|
|
else:
|
2019-05-14 17:53:58 +00:00
|
|
|
pprint('WARNING: /dev/mem is not readable, ignoring DMI data')
|
2017-07-05 21:42:55 +00:00
|
|
|
return out
|
|
|
|
fp.close()
|
|
|
|
|
|
|
|
# scan the table for the values we want
|
|
|
|
count = i = 0
|
|
|
|
while(count < num and i <= len(buf) - 4):
|
|
|
|
type, size, handle = struct.unpack('BBH', buf[i:i+4])
|
|
|
|
n = i + size
|
|
|
|
while n < len(buf) - 1:
|
|
|
|
if 0 == struct.unpack('H', buf[n:n+2])[0]:
|
|
|
|
break
|
|
|
|
n += 1
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
data = buf[i+size:n+2].split(b'\0')
|
2017-07-05 21:42:55 +00:00
|
|
|
for name in info:
|
|
|
|
itype, idxadr = info[name]
|
|
|
|
if itype == type:
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
idx = struct.unpack('B', buf[i+idxadr:i+idxadr+1])[0]
|
2017-07-05 21:42:55 +00:00
|
|
|
if idx > 0 and idx < len(data) - 1:
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
s = data[idx-1].decode('utf-8')
|
|
|
|
if s.strip() and s.strip().lower() != 'to be filled by o.e.m.':
|
|
|
|
out[name] = s
|
2017-07-05 21:42:55 +00:00
|
|
|
i = n + 2
|
|
|
|
count += 1
|
|
|
|
return out
|
|
|
|
|
2014-08-08 16:11:59 +00:00
|
|
|
# Function: getFPDT
|
|
|
|
# Description:
|
|
|
|
# Read the acpi bios tables and pull out FPDT, the firmware data
|
|
|
|
# Arguments:
|
|
|
|
# output: True to output the info to stdout, False otherwise
|
|
|
|
def getFPDT(output):
|
|
|
|
rectype = {}
|
|
|
|
rectype[0] = 'Firmware Basic Boot Performance Record'
|
|
|
|
rectype[1] = 'S3 Performance Table Record'
|
|
|
|
prectype = {}
|
|
|
|
prectype[0] = 'Basic S3 Resume Performance Record'
|
|
|
|
prectype[1] = 'Basic S3 Suspend Performance Record'
|
|
|
|
|
2017-07-05 21:42:55 +00:00
|
|
|
sysvals.rootCheck(True)
|
2014-08-08 16:11:59 +00:00
|
|
|
if(not os.path.exists(sysvals.fpdtpath)):
|
|
|
|
if(output):
|
2016-12-14 18:37:07 +00:00
|
|
|
doError('file does not exist: %s' % sysvals.fpdtpath)
|
2014-08-08 16:11:59 +00:00
|
|
|
return False
|
|
|
|
if(not os.access(sysvals.fpdtpath, os.R_OK)):
|
|
|
|
if(output):
|
2016-12-14 18:37:07 +00:00
|
|
|
doError('file is not readable: %s' % sysvals.fpdtpath)
|
2014-08-08 16:11:59 +00:00
|
|
|
return False
|
|
|
|
if(not os.path.exists(sysvals.mempath)):
|
|
|
|
if(output):
|
2016-12-14 18:37:07 +00:00
|
|
|
doError('file does not exist: %s' % sysvals.mempath)
|
2014-08-08 16:11:59 +00:00
|
|
|
return False
|
|
|
|
if(not os.access(sysvals.mempath, os.R_OK)):
|
|
|
|
if(output):
|
2016-12-14 18:37:07 +00:00
|
|
|
doError('file is not readable: %s' % sysvals.mempath)
|
2014-08-08 16:11:59 +00:00
|
|
|
return False
|
|
|
|
|
|
|
|
fp = open(sysvals.fpdtpath, 'rb')
|
|
|
|
buf = fp.read()
|
|
|
|
fp.close()
|
|
|
|
|
|
|
|
if(len(buf) < 36):
|
|
|
|
if(output):
|
|
|
|
doError('Invalid FPDT table data, should '+\
|
2016-12-14 18:37:07 +00:00
|
|
|
'be at least 36 bytes')
|
2014-08-08 16:11:59 +00:00
|
|
|
return False
|
|
|
|
|
|
|
|
table = struct.unpack('4sIBB6s8sI4sI', buf[0:36])
|
|
|
|
if(output):
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint('\n'\
|
|
|
|
'Firmware Performance Data Table (%s)\n'\
|
|
|
|
' Signature : %s\n'\
|
|
|
|
' Table Length : %u\n'\
|
|
|
|
' Revision : %u\n'\
|
|
|
|
' Checksum : 0x%x\n'\
|
|
|
|
' OEM ID : %s\n'\
|
|
|
|
' OEM Table ID : %s\n'\
|
|
|
|
' OEM Revision : %u\n'\
|
|
|
|
' Creator ID : %s\n'\
|
|
|
|
' Creator Revision : 0x%x\n'\
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
'' % (ascii(table[0]), ascii(table[0]), table[1], table[2],
|
|
|
|
table[3], ascii(table[4]), ascii(table[5]), table[6],
|
|
|
|
ascii(table[7]), table[8]))
|
2014-08-08 16:11:59 +00:00
|
|
|
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
if(table[0] != b'FPDT'):
|
2014-08-08 16:11:59 +00:00
|
|
|
if(output):
|
|
|
|
doError('Invalid FPDT table')
|
|
|
|
return False
|
|
|
|
if(len(buf) <= 36):
|
|
|
|
return False
|
|
|
|
i = 0
|
|
|
|
fwData = [0, 0]
|
|
|
|
records = buf[36:]
|
2019-05-14 17:53:58 +00:00
|
|
|
try:
|
|
|
|
fp = open(sysvals.mempath, 'rb')
|
|
|
|
except:
|
|
|
|
pprint('WARNING: /dev/mem is not readable, ignoring the FPDT data')
|
|
|
|
return False
|
2014-08-08 16:11:59 +00:00
|
|
|
while(i < len(records)):
|
|
|
|
header = struct.unpack('HBB', records[i:i+4])
|
|
|
|
if(header[0] not in rectype):
|
2016-07-15 21:34:14 +00:00
|
|
|
i += header[1]
|
2014-08-08 16:11:59 +00:00
|
|
|
continue
|
|
|
|
if(header[1] != 16):
|
2016-07-15 21:34:14 +00:00
|
|
|
i += header[1]
|
2014-08-08 16:11:59 +00:00
|
|
|
continue
|
|
|
|
addr = struct.unpack('Q', records[i+8:i+16])[0]
|
|
|
|
try:
|
|
|
|
fp.seek(addr)
|
|
|
|
first = fp.read(8)
|
|
|
|
except:
|
2016-07-15 21:34:14 +00:00
|
|
|
if(output):
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint('Bad address 0x%x in %s' % (addr, sysvals.mempath))
|
2016-07-15 21:34:14 +00:00
|
|
|
return [0, 0]
|
2014-08-08 16:11:59 +00:00
|
|
|
rechead = struct.unpack('4sI', first)
|
|
|
|
recdata = fp.read(rechead[1]-8)
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
if(rechead[0] == b'FBPT'):
|
|
|
|
record = struct.unpack('HBBIQQQQQ', recdata[:48])
|
2014-08-08 16:11:59 +00:00
|
|
|
if(output):
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint('%s (%s)\n'\
|
|
|
|
' Reset END : %u ns\n'\
|
|
|
|
' OS Loader LoadImage Start : %u ns\n'\
|
|
|
|
' OS Loader StartImage Start : %u ns\n'\
|
|
|
|
' ExitBootServices Entry : %u ns\n'\
|
|
|
|
' ExitBootServices Exit : %u ns'\
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
'' % (rectype[header[0]], ascii(rechead[0]), record[4], record[5],
|
2018-10-08 22:56:32 +00:00
|
|
|
record[6], record[7], record[8]))
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
elif(rechead[0] == b'S3PT'):
|
2014-08-08 16:11:59 +00:00
|
|
|
if(output):
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
pprint('%s (%s)' % (rectype[header[0]], ascii(rechead[0])))
|
2014-08-08 16:11:59 +00:00
|
|
|
j = 0
|
|
|
|
while(j < len(recdata)):
|
|
|
|
prechead = struct.unpack('HBB', recdata[j:j+4])
|
|
|
|
if(prechead[0] not in prectype):
|
|
|
|
continue
|
|
|
|
if(prechead[0] == 0):
|
|
|
|
record = struct.unpack('IIQQ', recdata[j:j+prechead[1]])
|
|
|
|
fwData[1] = record[2]
|
|
|
|
if(output):
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint(' %s\n'\
|
|
|
|
' Resume Count : %u\n'\
|
|
|
|
' FullResume : %u ns\n'\
|
|
|
|
' AverageResume : %u ns'\
|
|
|
|
'' % (prectype[prechead[0]], record[1],
|
|
|
|
record[2], record[3]))
|
2014-08-08 16:11:59 +00:00
|
|
|
elif(prechead[0] == 1):
|
|
|
|
record = struct.unpack('QQ', recdata[j+4:j+prechead[1]])
|
|
|
|
fwData[0] = record[1] - record[0]
|
|
|
|
if(output):
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint(' %s\n'\
|
|
|
|
' SuspendStart : %u ns\n'\
|
|
|
|
' SuspendEnd : %u ns\n'\
|
|
|
|
' SuspendTime : %u ns'\
|
|
|
|
'' % (prectype[prechead[0]], record[0],
|
|
|
|
record[1], fwData[0]))
|
|
|
|
|
2014-08-08 16:11:59 +00:00
|
|
|
j += prechead[1]
|
|
|
|
if(output):
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint('')
|
2014-08-08 16:11:59 +00:00
|
|
|
i += header[1]
|
|
|
|
fp.close()
|
|
|
|
return fwData
|
|
|
|
|
2014-01-17 00:18:22 +00:00
|
|
|
# Function: statusCheck
|
|
|
|
# Description:
|
2014-08-08 16:11:59 +00:00
|
|
|
# Verify that the requested command and options will work, and
|
|
|
|
# print the results to the terminal
|
|
|
|
# Output:
|
|
|
|
# True if the test will work, False if not
|
2016-07-15 21:34:14 +00:00
|
|
|
def statusCheck(probecheck=False):
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
status = ''
|
2014-01-17 00:18:22 +00:00
|
|
|
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint('Checking this system (%s)...' % platform.node())
|
2014-01-17 00:18:22 +00:00
|
|
|
|
|
|
|
# check we have root access
|
2016-07-15 21:34:14 +00:00
|
|
|
res = sysvals.colorText('NO (No features of this tool will work!)')
|
2017-07-05 21:42:55 +00:00
|
|
|
if(sysvals.rootCheck(False)):
|
2016-07-15 21:34:14 +00:00
|
|
|
res = 'YES'
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint(' have root access: %s' % res)
|
2014-08-08 16:11:59 +00:00
|
|
|
if(res != 'YES'):
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint(' Try running this script with sudo')
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
return 'missing root access'
|
2014-01-17 00:18:22 +00:00
|
|
|
|
|
|
|
# check sysfs is mounted
|
2016-07-15 21:34:14 +00:00
|
|
|
res = sysvals.colorText('NO (No features of this tool will work!)')
|
|
|
|
if(os.path.exists(sysvals.powerfile)):
|
|
|
|
res = 'YES'
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint(' is sysfs mounted: %s' % res)
|
2014-08-08 16:11:59 +00:00
|
|
|
if(res != 'YES'):
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
return 'sysfs is missing'
|
2014-01-17 00:18:22 +00:00
|
|
|
|
|
|
|
# check target mode is a valid mode
|
2016-07-15 21:34:14 +00:00
|
|
|
if sysvals.suspendmode != 'command':
|
|
|
|
res = sysvals.colorText('NO')
|
|
|
|
modes = getModes()
|
|
|
|
if(sysvals.suspendmode in modes):
|
|
|
|
res = 'YES'
|
|
|
|
else:
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
status = '%s mode is not supported' % sysvals.suspendmode
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint(' is "%s" a valid power mode: %s' % (sysvals.suspendmode, res))
|
2016-07-15 21:34:14 +00:00
|
|
|
if(res == 'NO'):
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint(' valid power modes are: %s' % modes)
|
|
|
|
pprint(' please choose one with -m')
|
2014-01-17 00:18:22 +00:00
|
|
|
|
|
|
|
# check if ftrace is available
|
2016-07-15 21:34:14 +00:00
|
|
|
res = sysvals.colorText('NO')
|
|
|
|
ftgood = sysvals.verifyFtrace()
|
2014-08-08 16:11:59 +00:00
|
|
|
if(ftgood):
|
|
|
|
res = 'YES'
|
|
|
|
elif(sysvals.usecallgraph):
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
status = 'ftrace is not properly supported'
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint(' is ftrace supported: %s' % res)
|
2014-08-08 16:11:59 +00:00
|
|
|
|
2016-07-15 21:34:14 +00:00
|
|
|
# check if kprobes are available
|
2019-05-14 17:53:58 +00:00
|
|
|
if sysvals.usekprobes:
|
|
|
|
res = sysvals.colorText('NO')
|
|
|
|
sysvals.usekprobes = sysvals.verifyKprobes()
|
|
|
|
if(sysvals.usekprobes):
|
|
|
|
res = 'YES'
|
|
|
|
else:
|
|
|
|
sysvals.usedevsrc = False
|
|
|
|
pprint(' are kprobes supported: %s' % res)
|
2016-07-15 21:34:14 +00:00
|
|
|
|
2014-08-08 16:11:59 +00:00
|
|
|
# what data source are we using
|
|
|
|
res = 'DMESG'
|
|
|
|
if(ftgood):
|
2018-01-30 08:17:20 +00:00
|
|
|
sysvals.usetraceevents = True
|
2014-08-08 16:11:59 +00:00
|
|
|
for e in sysvals.traceevents:
|
2018-01-30 08:17:20 +00:00
|
|
|
if not os.path.exists(sysvals.epath+e):
|
|
|
|
sysvals.usetraceevents = False
|
|
|
|
if(sysvals.usetraceevents):
|
2014-08-08 16:11:59 +00:00
|
|
|
res = 'FTRACE (all trace events found)'
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint(' timeline data source: %s' % res)
|
2014-01-17 00:18:22 +00:00
|
|
|
|
|
|
|
# check if rtcwake
|
2016-07-15 21:34:14 +00:00
|
|
|
res = sysvals.colorText('NO')
|
2014-08-08 16:11:59 +00:00
|
|
|
if(sysvals.rtcpath != ''):
|
|
|
|
res = 'YES'
|
|
|
|
elif(sysvals.rtcwake):
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
status = 'rtcwake is not properly supported'
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint(' is rtcwake supported: %s' % res)
|
2014-01-17 00:18:22 +00:00
|
|
|
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
# check info commands
|
|
|
|
pprint(' optional commands this tool may use for info:')
|
|
|
|
no = sysvals.colorText('MISSING')
|
|
|
|
yes = sysvals.colorText('FOUND', 32)
|
|
|
|
for c in ['turbostat', 'mcelog', 'lspci', 'lsusb']:
|
|
|
|
if c == 'turbostat':
|
|
|
|
res = yes if sysvals.haveTurbostat() else no
|
|
|
|
else:
|
|
|
|
res = yes if sysvals.getExec(c) else no
|
|
|
|
pprint(' %s: %s' % (c, res))
|
|
|
|
|
2016-07-15 21:34:14 +00:00
|
|
|
if not probecheck:
|
|
|
|
return status
|
|
|
|
|
2016-12-14 18:37:06 +00:00
|
|
|
# verify kprobes
|
2016-12-14 18:37:07 +00:00
|
|
|
if sysvals.usekprobes:
|
|
|
|
for name in sysvals.tracefuncs:
|
|
|
|
sysvals.defaultKprobe(name, sysvals.tracefuncs[name])
|
|
|
|
if sysvals.usedevsrc:
|
|
|
|
for name in sysvals.dev_tracefuncs:
|
|
|
|
sysvals.defaultKprobe(name, sysvals.dev_tracefuncs[name])
|
|
|
|
sysvals.addKprobes(True)
|
2016-07-15 21:34:14 +00:00
|
|
|
|
2014-08-08 16:11:59 +00:00
|
|
|
return status
|
2014-01-17 00:18:22 +00:00
|
|
|
|
2014-08-08 16:11:59 +00:00
|
|
|
# Function: doError
|
|
|
|
# Description:
|
|
|
|
# generic error function for catastrphic failures
|
|
|
|
# Arguments:
|
|
|
|
# msg: the error message to print
|
|
|
|
# help: True if printHelp should be called after, False otherwise
|
2016-12-14 18:37:07 +00:00
|
|
|
def doError(msg, help=False):
|
2014-01-17 00:18:22 +00:00
|
|
|
if(help == True):
|
|
|
|
printHelp()
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint('ERROR: %s\n' % msg)
|
2018-01-30 08:17:20 +00:00
|
|
|
sysvals.outputResult({'error':msg})
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
sys.exit(1)
|
2014-01-17 00:18:22 +00:00
|
|
|
|
2014-08-08 16:11:59 +00:00
|
|
|
# Function: getArgInt
|
|
|
|
# Description:
|
|
|
|
# pull out an integer argument from the command line with checks
|
2016-07-15 21:34:14 +00:00
|
|
|
def getArgInt(name, args, min, max, main=True):
|
|
|
|
if main:
|
|
|
|
try:
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
arg = next(args)
|
2016-07-15 21:34:14 +00:00
|
|
|
except:
|
|
|
|
doError(name+': no argument supplied', True)
|
|
|
|
else:
|
|
|
|
arg = args
|
2014-08-08 16:11:59 +00:00
|
|
|
try:
|
|
|
|
val = int(arg)
|
|
|
|
except:
|
|
|
|
doError(name+': non-integer value given', True)
|
|
|
|
if(val < min or val > max):
|
|
|
|
doError(name+': value should be between %d and %d' % (min, max), True)
|
|
|
|
return val
|
|
|
|
|
2016-07-15 21:34:14 +00:00
|
|
|
# Function: getArgFloat
|
|
|
|
# Description:
|
|
|
|
# pull out a float argument from the command line with checks
|
|
|
|
def getArgFloat(name, args, min, max, main=True):
|
|
|
|
if main:
|
|
|
|
try:
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
arg = next(args)
|
2016-07-15 21:34:14 +00:00
|
|
|
except:
|
|
|
|
doError(name+': no argument supplied', True)
|
|
|
|
else:
|
|
|
|
arg = args
|
|
|
|
try:
|
|
|
|
val = float(arg)
|
|
|
|
except:
|
|
|
|
doError(name+': non-numerical value given', True)
|
|
|
|
if(val < min or val > max):
|
|
|
|
doError(name+': value should be between %f and %f' % (min, max), True)
|
|
|
|
return val
|
|
|
|
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
def processData(live=False, quiet=False):
|
|
|
|
if not quiet:
|
2020-07-21 01:02:49 +00:00
|
|
|
pprint('PROCESSING: %s' % sysvals.htmlfile)
|
2019-05-14 17:53:58 +00:00
|
|
|
sysvals.vprint('usetraceevents=%s, usetracemarkers=%s, usekprobes=%s' % \
|
|
|
|
(sysvals.usetraceevents, sysvals.usetracemarkers, sysvals.usekprobes))
|
2018-05-24 16:36:28 +00:00
|
|
|
error = ''
|
2018-01-30 08:17:20 +00:00
|
|
|
if(sysvals.usetraceevents):
|
2018-05-24 16:36:28 +00:00
|
|
|
testruns, error = parseTraceLog(live)
|
2016-12-14 18:37:07 +00:00
|
|
|
if sysvals.dmesgfile:
|
|
|
|
for data in testruns:
|
2018-01-30 08:17:20 +00:00
|
|
|
data.extractErrorInfo()
|
2014-08-08 16:11:59 +00:00
|
|
|
else:
|
|
|
|
testruns = loadKernelLog()
|
|
|
|
for data in testruns:
|
|
|
|
parseKernelLog(data)
|
2016-12-14 18:37:07 +00:00
|
|
|
if(sysvals.ftracefile and (sysvals.usecallgraph or sysvals.usetraceevents)):
|
2014-08-08 16:11:59 +00:00
|
|
|
appendIncompleteTraceLog(testruns)
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
if not sysvals.stamp:
|
|
|
|
pprint('ERROR: data does not include the expected stamp')
|
|
|
|
return (testruns, {'error': 'timeline generation failed'})
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
shown = ['bios', 'biosdate', 'cpu', 'host', 'kernel', 'man', 'memfr',
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
'memsz', 'mode', 'numcpu', 'plat', 'time', 'wifi']
|
2019-05-14 17:53:58 +00:00
|
|
|
sysvals.vprint('System Info:')
|
|
|
|
for key in sorted(sysvals.stamp):
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
if key in shown:
|
|
|
|
sysvals.vprint(' %-8s : %s' % (key.upper(), sysvals.stamp[key]))
|
2018-01-30 08:17:20 +00:00
|
|
|
sysvals.vprint('Command:\n %s' % sysvals.cmdline)
|
|
|
|
for data in testruns:
|
2019-05-14 17:53:57 +00:00
|
|
|
if data.turbostat:
|
2019-05-14 17:53:58 +00:00
|
|
|
idx, s = 0, 'Turbostat:\n '
|
|
|
|
for val in data.turbostat.split('|'):
|
|
|
|
idx += len(val) + 1
|
|
|
|
if idx >= 80:
|
|
|
|
idx = 0
|
|
|
|
s += '\n '
|
|
|
|
s += val + ' '
|
|
|
|
sysvals.vprint(s)
|
2018-01-30 08:17:20 +00:00
|
|
|
data.printDetails()
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
if len(sysvals.platinfo) > 0:
|
|
|
|
sysvals.vprint('\nPlatform Info:')
|
|
|
|
for info in sysvals.platinfo:
|
|
|
|
sysvals.vprint('[%s - %s]' % (info[0], info[1]))
|
|
|
|
sysvals.vprint(info[2])
|
|
|
|
sysvals.vprint('')
|
2018-01-30 08:17:20 +00:00
|
|
|
if sysvals.cgdump:
|
|
|
|
for data in testruns:
|
|
|
|
data.debugPrint()
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
sys.exit(0)
|
2018-05-24 16:36:28 +00:00
|
|
|
if len(testruns) < 1:
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint('ERROR: Not enough test data to build a timeline')
|
2018-05-24 16:36:28 +00:00
|
|
|
return (testruns, {'error': 'timeline generation failed'})
|
2018-01-30 08:17:20 +00:00
|
|
|
sysvals.vprint('Creating the html timeline (%s)...' % sysvals.htmlfile)
|
2018-05-24 16:36:28 +00:00
|
|
|
createHTML(testruns, error)
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
if not quiet:
|
2020-07-21 01:02:49 +00:00
|
|
|
pprint('DONE: %s' % sysvals.htmlfile)
|
2018-01-30 08:17:20 +00:00
|
|
|
data = testruns[0]
|
|
|
|
stamp = data.stamp
|
|
|
|
stamp['suspend'], stamp['resume'] = data.getTimeValues()
|
|
|
|
if data.fwValid:
|
|
|
|
stamp['fwsuspend'], stamp['fwresume'] = data.fwSuspend, data.fwResume
|
2018-05-24 16:36:28 +00:00
|
|
|
if error:
|
|
|
|
stamp['error'] = error
|
2018-01-30 08:17:20 +00:00
|
|
|
return (testruns, stamp)
|
2014-08-08 16:11:59 +00:00
|
|
|
|
2016-12-14 18:37:07 +00:00
|
|
|
# Function: rerunTest
|
|
|
|
# Description:
|
|
|
|
# generate an output from an existing set of ftrace/dmesg logs
|
2019-05-14 17:53:58 +00:00
|
|
|
def rerunTest(htmlfile=''):
|
2016-12-14 18:37:07 +00:00
|
|
|
if sysvals.ftracefile:
|
|
|
|
doesTraceLogHaveTraceEvents()
|
2018-01-30 08:17:20 +00:00
|
|
|
if not sysvals.dmesgfile and not sysvals.usetraceevents:
|
2016-12-14 18:37:07 +00:00
|
|
|
doError('recreating this html output requires a dmesg file')
|
2019-05-14 17:53:58 +00:00
|
|
|
if htmlfile:
|
|
|
|
sysvals.htmlfile = htmlfile
|
2019-05-14 17:53:57 +00:00
|
|
|
else:
|
|
|
|
sysvals.setOutputFile()
|
2017-07-05 21:42:55 +00:00
|
|
|
if os.path.exists(sysvals.htmlfile):
|
|
|
|
if not os.path.isfile(sysvals.htmlfile):
|
|
|
|
doError('a directory already exists with this name: %s' % sysvals.htmlfile)
|
|
|
|
elif not os.access(sysvals.htmlfile, os.W_OK):
|
|
|
|
doError('missing permission to write to %s' % sysvals.htmlfile)
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
testruns, stamp = processData()
|
|
|
|
sysvals.resetlog()
|
2018-01-30 08:17:20 +00:00
|
|
|
return stamp
|
2016-12-14 18:37:07 +00:00
|
|
|
|
2014-08-08 16:11:59 +00:00
|
|
|
# Function: runTest
|
|
|
|
# Description:
|
|
|
|
# execute a suspend/resume, gather the logs, and generate the output
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
def runTest(n=0, quiet=False):
|
2014-08-08 16:11:59 +00:00
|
|
|
# prepare for the test
|
2017-07-05 21:42:55 +00:00
|
|
|
sysvals.initTestOutput('suspend')
|
2020-11-11 02:36:17 +00:00
|
|
|
op = sysvals.writeDatafileHeader(sysvals.dmesgfile, [])
|
|
|
|
op.write('# EXECUTION TRACE START\n')
|
|
|
|
op.close()
|
|
|
|
if n <= 1:
|
|
|
|
if sysvals.rs != 0:
|
|
|
|
sysvals.dlog('%sabling runtime suspend' % ('en' if sysvals.rs > 0 else 'dis'))
|
|
|
|
sysvals.setRuntimeSuspend(True)
|
|
|
|
if sysvals.display:
|
|
|
|
ret = sysvals.displayControl('init')
|
|
|
|
sysvals.dlog('xset display init, ret = %d' % ret)
|
|
|
|
sysvals.dlog('initialize ftrace')
|
|
|
|
sysvals.initFtrace(quiet)
|
2014-08-08 16:11:59 +00:00
|
|
|
|
|
|
|
# execute the test
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
executeSuspend(quiet)
|
2016-07-15 21:34:14 +00:00
|
|
|
sysvals.cleanupFtrace()
|
2018-01-30 08:17:20 +00:00
|
|
|
if sysvals.skiphtml:
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
sysvals.outputResult({}, n)
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
sysvals.sudoUserchown(sysvals.testdir)
|
2018-01-30 08:17:20 +00:00
|
|
|
return
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
testruns, stamp = processData(True, quiet)
|
|
|
|
for data in testruns:
|
|
|
|
del data
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
sysvals.sudoUserchown(sysvals.testdir)
|
2018-01-30 08:17:20 +00:00
|
|
|
sysvals.outputResult(stamp, n)
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
if 'error' in stamp:
|
|
|
|
return 2
|
|
|
|
return 0
|
2014-08-08 16:11:59 +00:00
|
|
|
|
2018-05-24 16:36:28 +00:00
|
|
|
def find_in_html(html, start, end, firstonly=True):
|
2020-07-21 01:02:49 +00:00
|
|
|
cnt, out, list = len(html), [], []
|
|
|
|
if firstonly:
|
|
|
|
m = re.search(start, html)
|
|
|
|
if m:
|
|
|
|
list.append(m)
|
|
|
|
else:
|
|
|
|
list = re.finditer(start, html)
|
|
|
|
for match in list:
|
|
|
|
s = match.end()
|
|
|
|
e = cnt if (len(out) < 1 or s + 10000 > cnt) else s + 10000
|
|
|
|
m = re.search(end, html[s:e])
|
2018-05-24 16:36:28 +00:00
|
|
|
if not m:
|
|
|
|
break
|
2020-07-21 01:02:49 +00:00
|
|
|
e = s + m.start()
|
|
|
|
str = html[s:e]
|
2018-05-24 16:36:28 +00:00
|
|
|
if end == 'ms':
|
|
|
|
num = re.search(r'[-+]?\d*\.\d+|\d+', str)
|
|
|
|
str = num.group() if num else 'NaN'
|
|
|
|
if firstonly:
|
|
|
|
return str
|
|
|
|
out.append(str)
|
|
|
|
if firstonly:
|
2017-04-07 18:05:35 +00:00
|
|
|
return ''
|
2018-05-24 16:36:28 +00:00
|
|
|
return out
|
2017-04-07 18:05:35 +00:00
|
|
|
|
2019-05-14 17:53:58 +00:00
|
|
|
def data_from_html(file, outpath, issues, fulldetail=False):
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
html = open(file, 'r').read()
|
2019-05-14 17:53:58 +00:00
|
|
|
sysvals.htmlfile = os.path.relpath(file, outpath)
|
2019-05-14 17:53:57 +00:00
|
|
|
# extract general info
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
suspend = find_in_html(html, 'Kernel Suspend', 'ms')
|
|
|
|
resume = find_in_html(html, 'Kernel Resume', 'ms')
|
2019-05-14 17:53:58 +00:00
|
|
|
sysinfo = find_in_html(html, '<div class="stamp sysinfo">', '</div>')
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
line = find_in_html(html, '<div class="stamp">', '</div>')
|
|
|
|
stmp = line.split()
|
|
|
|
if not suspend or not resume or len(stmp) != 8:
|
|
|
|
return False
|
|
|
|
try:
|
|
|
|
dt = datetime.strptime(' '.join(stmp[3:]), '%B %d %Y, %I:%M:%S %p')
|
|
|
|
except:
|
|
|
|
return False
|
2019-05-14 17:53:57 +00:00
|
|
|
sysvals.hostname = stmp[0]
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
tstr = dt.strftime('%Y/%m/%d %H:%M:%S')
|
|
|
|
error = find_in_html(html, '<table class="testfail"><tr><td>', '</td>')
|
|
|
|
if error:
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
m = re.match('[a-z0-9]* failed in (?P<p>\S*).*', error)
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
if m:
|
|
|
|
result = 'fail in %s' % m.group('p')
|
|
|
|
else:
|
|
|
|
result = 'fail'
|
|
|
|
else:
|
|
|
|
result = 'pass'
|
2019-05-14 17:53:57 +00:00
|
|
|
# extract error info
|
2020-07-21 01:02:49 +00:00
|
|
|
tp, ilist = False, []
|
2019-05-14 17:53:58 +00:00
|
|
|
extra = dict()
|
2019-05-14 17:53:57 +00:00
|
|
|
log = find_in_html(html, '<div id="dmesglog" style="display:none;">',
|
|
|
|
'</div>').strip()
|
|
|
|
if log:
|
|
|
|
d = Data(0)
|
|
|
|
d.end = 999999999
|
|
|
|
d.dmesgtext = log.split('\n')
|
2020-07-21 01:02:49 +00:00
|
|
|
tp = d.extractErrorInfo()
|
|
|
|
for msg in tp.msglist:
|
2019-05-14 17:53:58 +00:00
|
|
|
sysvals.errorSummary(issues, msg)
|
|
|
|
if stmp[2] == 'freeze':
|
|
|
|
extra = d.turbostatInfo()
|
2019-05-14 17:53:57 +00:00
|
|
|
elist = dict()
|
|
|
|
for dir in d.errorinfo:
|
|
|
|
for err in d.errorinfo[dir]:
|
|
|
|
if err[0] not in elist:
|
|
|
|
elist[err[0]] = 0
|
|
|
|
elist[err[0]] += 1
|
|
|
|
for i in elist:
|
|
|
|
ilist.append('%sx%d' % (i, elist[i]) if elist[i] > 1 else i)
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
wifi = find_in_html(html, 'Wifi Resume: ', '</td>')
|
|
|
|
if wifi:
|
|
|
|
extra['wifi'] = wifi
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
low = find_in_html(html, 'freeze time: <b>', ' ms</b>')
|
2020-11-11 02:36:17 +00:00
|
|
|
for lowstr in ['waking', '+']:
|
|
|
|
if not low:
|
|
|
|
break
|
|
|
|
if lowstr not in low:
|
|
|
|
continue
|
|
|
|
if lowstr == '+':
|
|
|
|
issue = 'S2LOOPx%d' % len(low.split('+'))
|
|
|
|
else:
|
|
|
|
m = re.match('.*waking *(?P<n>[0-9]*) *times.*', low)
|
|
|
|
issue = 'S2WAKEx%s' % m.group('n') if m else 'S2WAKExNaN'
|
2019-05-14 17:53:57 +00:00
|
|
|
match = [i for i in issues if i['match'] == issue]
|
|
|
|
if len(match) > 0:
|
|
|
|
match[0]['count'] += 1
|
|
|
|
if sysvals.hostname not in match[0]['urls']:
|
2019-05-14 17:53:58 +00:00
|
|
|
match[0]['urls'][sysvals.hostname] = [sysvals.htmlfile]
|
|
|
|
elif sysvals.htmlfile not in match[0]['urls'][sysvals.hostname]:
|
|
|
|
match[0]['urls'][sysvals.hostname].append(sysvals.htmlfile)
|
2019-05-14 17:53:57 +00:00
|
|
|
else:
|
|
|
|
issues.append({
|
|
|
|
'match': issue, 'count': 1, 'line': issue,
|
2019-05-14 17:53:58 +00:00
|
|
|
'urls': {sysvals.hostname: [sysvals.htmlfile]},
|
2019-05-14 17:53:57 +00:00
|
|
|
})
|
|
|
|
ilist.append(issue)
|
|
|
|
# extract device info
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
devices = dict()
|
|
|
|
for line in html.split('\n'):
|
|
|
|
m = re.match(' *<div id=\"[a,0-9]*\" *title=\"(?P<title>.*)\" class=\"thread.*', line)
|
|
|
|
if not m or 'thread kth' in line or 'thread sec' in line:
|
|
|
|
continue
|
|
|
|
m = re.match('(?P<n>.*) \((?P<t>[0-9,\.]*) ms\) (?P<p>.*)', m.group('title'))
|
|
|
|
if not m:
|
|
|
|
continue
|
|
|
|
name, time, phase = m.group('n'), m.group('t'), m.group('p')
|
|
|
|
if ' async' in name or ' sync' in name:
|
|
|
|
name = ' '.join(name.split(' ')[:-1])
|
2019-05-14 17:53:57 +00:00
|
|
|
if phase.startswith('suspend'):
|
|
|
|
d = 'suspend'
|
|
|
|
elif phase.startswith('resume'):
|
|
|
|
d = 'resume'
|
|
|
|
else:
|
|
|
|
continue
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
if d not in devices:
|
|
|
|
devices[d] = dict()
|
|
|
|
if name not in devices[d]:
|
|
|
|
devices[d][name] = 0.0
|
|
|
|
devices[d][name] += float(time)
|
2019-05-14 17:53:57 +00:00
|
|
|
# create worst device info
|
|
|
|
worst = dict()
|
|
|
|
for d in ['suspend', 'resume']:
|
|
|
|
worst[d] = {'name':'', 'time': 0.0}
|
|
|
|
dev = devices[d] if d in devices else 0
|
|
|
|
if dev and len(dev.keys()) > 0:
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
n = sorted(dev, key=lambda k:(dev[k], k), reverse=True)[0]
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
worst[d]['name'], worst[d]['time'] = n, dev[n]
|
|
|
|
data = {
|
|
|
|
'mode': stmp[2],
|
|
|
|
'host': stmp[0],
|
|
|
|
'kernel': stmp[1],
|
2019-05-14 17:53:58 +00:00
|
|
|
'sysinfo': sysinfo,
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
'time': tstr,
|
|
|
|
'result': result,
|
|
|
|
'issues': ' '.join(ilist),
|
|
|
|
'suspend': suspend,
|
|
|
|
'resume': resume,
|
2019-05-14 17:53:57 +00:00
|
|
|
'devlist': devices,
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
'sus_worst': worst['suspend']['name'],
|
|
|
|
'sus_worsttime': worst['suspend']['time'],
|
|
|
|
'res_worst': worst['resume']['name'],
|
|
|
|
'res_worsttime': worst['resume']['time'],
|
2019-05-14 17:53:57 +00:00
|
|
|
'url': sysvals.htmlfile,
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
}
|
2019-05-14 17:53:58 +00:00
|
|
|
for key in extra:
|
|
|
|
data[key] = extra[key]
|
|
|
|
if fulldetail:
|
|
|
|
data['funclist'] = find_in_html(html, '<div title="', '" class="traceevent"', False)
|
2020-07-21 01:02:49 +00:00
|
|
|
if tp:
|
|
|
|
for arg in ['-multi ', '-info ']:
|
|
|
|
if arg in tp.cmdline:
|
|
|
|
data['target'] = tp.cmdline[tp.cmdline.find(arg):].split()[1]
|
|
|
|
break
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
return data
|
|
|
|
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
def genHtml(subdir, force=False):
|
2019-05-14 17:53:58 +00:00
|
|
|
for dirname, dirnames, filenames in os.walk(subdir):
|
|
|
|
sysvals.dmesgfile = sysvals.ftracefile = sysvals.htmlfile = ''
|
|
|
|
for filename in filenames:
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
file = os.path.join(dirname, filename)
|
|
|
|
if sysvals.usable(file):
|
|
|
|
if(re.match('.*_dmesg.txt', filename)):
|
|
|
|
sysvals.dmesgfile = file
|
|
|
|
elif(re.match('.*_ftrace.txt', filename)):
|
|
|
|
sysvals.ftracefile = file
|
2019-05-14 17:53:58 +00:00
|
|
|
sysvals.setOutputFile()
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
if (sysvals.dmesgfile or sysvals.ftracefile) and sysvals.htmlfile and \
|
|
|
|
(force or not sysvals.usable(sysvals.htmlfile)):
|
2019-05-14 17:53:58 +00:00
|
|
|
pprint('FTRACE: %s' % sysvals.ftracefile)
|
|
|
|
if sysvals.dmesgfile:
|
|
|
|
pprint('DMESG : %s' % sysvals.dmesgfile)
|
|
|
|
rerunTest()
|
|
|
|
|
2014-08-08 16:11:59 +00:00
|
|
|
# Function: runSummary
|
|
|
|
# Description:
|
|
|
|
# create a summary of tests in a sub-directory
|
2018-05-24 16:36:28 +00:00
|
|
|
def runSummary(subdir, local=True, genhtml=False):
|
2017-04-07 18:05:35 +00:00
|
|
|
inpath = os.path.abspath(subdir)
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
outpath = os.path.abspath('.') if local else inpath
|
2019-05-14 17:53:57 +00:00
|
|
|
pprint('Generating a summary of folder:\n %s' % inpath)
|
2018-05-24 16:36:28 +00:00
|
|
|
if genhtml:
|
2019-05-14 17:53:58 +00:00
|
|
|
genHtml(subdir)
|
2020-07-21 01:02:49 +00:00
|
|
|
target, issues, testruns = '', [], []
|
2018-10-08 22:56:32 +00:00
|
|
|
desc = {'host':[],'mode':[],'kernel':[]}
|
2014-08-08 16:11:59 +00:00
|
|
|
for dirname, dirnames, filenames in os.walk(subdir):
|
|
|
|
for filename in filenames:
|
2017-04-07 18:05:35 +00:00
|
|
|
if(not re.match('.*.html', filename)):
|
2014-08-08 16:11:59 +00:00
|
|
|
continue
|
2019-05-14 17:53:57 +00:00
|
|
|
data = data_from_html(os.path.join(dirname, filename), outpath, issues)
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
if(not data):
|
2017-04-07 18:05:35 +00:00
|
|
|
continue
|
2020-07-21 01:02:49 +00:00
|
|
|
if 'target' in data:
|
|
|
|
target = data['target']
|
2017-04-07 18:05:35 +00:00
|
|
|
testruns.append(data)
|
2018-10-08 22:56:32 +00:00
|
|
|
for key in desc:
|
|
|
|
if data[key] not in desc[key]:
|
|
|
|
desc[key].append(data[key])
|
2019-05-14 17:53:57 +00:00
|
|
|
pprint('Summary files:')
|
2018-10-08 22:56:32 +00:00
|
|
|
if len(desc['host']) == len(desc['mode']) == len(desc['kernel']) == 1:
|
|
|
|
title = '%s %s %s' % (desc['host'][0], desc['kernel'][0], desc['mode'][0])
|
2020-07-21 01:02:49 +00:00
|
|
|
if target:
|
|
|
|
title += ' %s' % target
|
2018-10-08 22:56:32 +00:00
|
|
|
else:
|
|
|
|
title = inpath
|
2019-05-14 17:53:57 +00:00
|
|
|
createHTMLSummarySimple(testruns, os.path.join(outpath, 'summary.html'), title)
|
|
|
|
pprint(' summary.html - tabular list of test data found')
|
|
|
|
createHTMLDeviceSummary(testruns, os.path.join(outpath, 'summary-devices.html'), title)
|
|
|
|
pprint(' summary-devices.html - kernel device list sorted by total execution time')
|
2019-05-14 17:53:58 +00:00
|
|
|
createHTMLIssuesSummary(testruns, issues, os.path.join(outpath, 'summary-issues.html'), title)
|
2019-05-14 17:53:57 +00:00
|
|
|
pprint(' summary-issues.html - kernel issues found sorted by frequency')
|
2014-08-08 16:11:59 +00:00
|
|
|
|
2016-07-15 21:34:14 +00:00
|
|
|
# Function: checkArgBool
|
|
|
|
# Description:
|
|
|
|
# check if a boolean string value is true or false
|
2018-01-30 08:17:20 +00:00
|
|
|
def checkArgBool(name, value):
|
|
|
|
if value in switchvalues:
|
|
|
|
if value in switchoff:
|
|
|
|
return False
|
2016-07-15 21:34:14 +00:00
|
|
|
return True
|
2018-01-30 08:17:20 +00:00
|
|
|
doError('invalid boolean --> (%s: %s), use "true/false" or "1/0"' % (name, value), True)
|
2016-07-15 21:34:14 +00:00
|
|
|
return False
|
|
|
|
|
|
|
|
# Function: configFromFile
|
|
|
|
# Description:
|
|
|
|
# Configure the script via the info in a config file
|
|
|
|
def configFromFile(file):
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
Config = configparser.ConfigParser()
|
2016-07-15 21:34:14 +00:00
|
|
|
|
|
|
|
Config.read(file)
|
|
|
|
sections = Config.sections()
|
2016-12-14 18:37:06 +00:00
|
|
|
overridekprobes = False
|
|
|
|
overridedevkprobes = False
|
2016-07-15 21:34:14 +00:00
|
|
|
if 'Settings' in sections:
|
|
|
|
for opt in Config.options('Settings'):
|
|
|
|
value = Config.get('Settings', opt).lower()
|
2018-01-30 08:17:20 +00:00
|
|
|
option = opt.lower()
|
|
|
|
if(option == 'verbose'):
|
|
|
|
sysvals.verbose = checkArgBool(option, value)
|
|
|
|
elif(option == 'addlogs'):
|
|
|
|
sysvals.dmesglog = sysvals.ftracelog = checkArgBool(option, value)
|
|
|
|
elif(option == 'dev'):
|
|
|
|
sysvals.usedevsrc = checkArgBool(option, value)
|
|
|
|
elif(option == 'proc'):
|
|
|
|
sysvals.useprocmon = checkArgBool(option, value)
|
|
|
|
elif(option == 'x2'):
|
|
|
|
if checkArgBool(option, value):
|
2016-07-15 21:34:14 +00:00
|
|
|
sysvals.execcount = 2
|
2018-01-30 08:17:20 +00:00
|
|
|
elif(option == 'callgraph'):
|
|
|
|
sysvals.usecallgraph = checkArgBool(option, value)
|
|
|
|
elif(option == 'override-timeline-functions'):
|
|
|
|
overridekprobes = checkArgBool(option, value)
|
|
|
|
elif(option == 'override-dev-timeline-functions'):
|
|
|
|
overridedevkprobes = checkArgBool(option, value)
|
|
|
|
elif(option == 'skiphtml'):
|
|
|
|
sysvals.skiphtml = checkArgBool(option, value)
|
|
|
|
elif(option == 'sync'):
|
|
|
|
sysvals.sync = checkArgBool(option, value)
|
|
|
|
elif(option == 'rs' or option == 'runtimesuspend'):
|
|
|
|
if value in switchvalues:
|
|
|
|
if value in switchoff:
|
|
|
|
sysvals.rs = -1
|
|
|
|
else:
|
|
|
|
sysvals.rs = 1
|
|
|
|
else:
|
|
|
|
doError('invalid value --> (%s: %s), use "enable/disable"' % (option, value), True)
|
|
|
|
elif(option == 'display'):
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
disopt = ['on', 'off', 'standby', 'suspend']
|
|
|
|
if value not in disopt:
|
|
|
|
doError('invalid value --> (%s: %s), use %s' % (option, value, disopt), True)
|
|
|
|
sysvals.display = value
|
2018-01-30 08:17:20 +00:00
|
|
|
elif(option == 'gzip'):
|
|
|
|
sysvals.gzip = checkArgBool(option, value)
|
|
|
|
elif(option == 'cgfilter'):
|
|
|
|
sysvals.setCallgraphFilter(value)
|
|
|
|
elif(option == 'cgskip'):
|
|
|
|
if value in switchoff:
|
|
|
|
sysvals.cgskip = ''
|
|
|
|
else:
|
|
|
|
sysvals.cgskip = sysvals.configFile(val)
|
|
|
|
if(not sysvals.cgskip):
|
|
|
|
doError('%s does not exist' % sysvals.cgskip)
|
|
|
|
elif(option == 'cgtest'):
|
|
|
|
sysvals.cgtest = getArgInt('cgtest', value, 0, 1, False)
|
|
|
|
elif(option == 'cgphase'):
|
|
|
|
d = Data(0)
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
if value not in d.phasedef:
|
2018-01-30 08:17:20 +00:00
|
|
|
doError('invalid phase --> (%s: %s), valid phases are %s'\
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
% (option, value, d.phasedef.keys()), True)
|
2018-01-30 08:17:20 +00:00
|
|
|
sysvals.cgphase = value
|
|
|
|
elif(option == 'fadd'):
|
|
|
|
file = sysvals.configFile(value)
|
|
|
|
if(not file):
|
|
|
|
doError('%s does not exist' % value)
|
|
|
|
sysvals.addFtraceFilterFunctions(file)
|
|
|
|
elif(option == 'result'):
|
|
|
|
sysvals.result = value
|
|
|
|
elif(option == 'multi'):
|
|
|
|
nums = value.split()
|
|
|
|
if len(nums) != 2:
|
|
|
|
doError('multi requires 2 integers (exec_count and delay)', True)
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
sysvals.multiinit(nums[0], nums[1])
|
2018-01-30 08:17:20 +00:00
|
|
|
elif(option == 'devicefilter'):
|
2016-12-14 18:37:05 +00:00
|
|
|
sysvals.setDeviceFilter(value)
|
2018-01-30 08:17:20 +00:00
|
|
|
elif(option == 'expandcg'):
|
|
|
|
sysvals.cgexp = checkArgBool(option, value)
|
|
|
|
elif(option == 'srgap'):
|
|
|
|
if checkArgBool(option, value):
|
2016-07-15 21:34:14 +00:00
|
|
|
sysvals.srgap = 5
|
2018-01-30 08:17:20 +00:00
|
|
|
elif(option == 'mode'):
|
2016-07-15 21:34:14 +00:00
|
|
|
sysvals.suspendmode = value
|
2018-01-30 08:17:20 +00:00
|
|
|
elif(option == 'command' or option == 'cmd'):
|
2016-07-15 21:34:14 +00:00
|
|
|
sysvals.testcommand = value
|
2018-01-30 08:17:20 +00:00
|
|
|
elif(option == 'x2delay'):
|
|
|
|
sysvals.x2delay = getArgInt('x2delay', value, 0, 60000, False)
|
|
|
|
elif(option == 'predelay'):
|
|
|
|
sysvals.predelay = getArgInt('predelay', value, 0, 60000, False)
|
|
|
|
elif(option == 'postdelay'):
|
|
|
|
sysvals.postdelay = getArgInt('postdelay', value, 0, 60000, False)
|
|
|
|
elif(option == 'maxdepth'):
|
|
|
|
sysvals.max_graph_depth = getArgInt('maxdepth', value, 0, 1000, False)
|
|
|
|
elif(option == 'rtcwake'):
|
|
|
|
if value in switchoff:
|
2017-04-07 18:05:35 +00:00
|
|
|
sysvals.rtcwake = False
|
|
|
|
else:
|
|
|
|
sysvals.rtcwake = True
|
2018-01-30 08:17:20 +00:00
|
|
|
sysvals.rtcwaketime = getArgInt('rtcwake', value, 0, 3600, False)
|
|
|
|
elif(option == 'timeprec'):
|
|
|
|
sysvals.setPrecision(getArgInt('timeprec', value, 0, 6, False))
|
|
|
|
elif(option == 'mindev'):
|
|
|
|
sysvals.mindevlen = getArgFloat('mindev', value, 0.0, 10000.0, False)
|
|
|
|
elif(option == 'callloop-maxgap'):
|
|
|
|
sysvals.callloopmaxgap = getArgFloat('callloop-maxgap', value, 0.0, 1.0, False)
|
|
|
|
elif(option == 'callloop-maxlen'):
|
|
|
|
sysvals.callloopmaxgap = getArgFloat('callloop-maxlen', value, 0.0, 1.0, False)
|
|
|
|
elif(option == 'mincg'):
|
|
|
|
sysvals.mincglen = getArgFloat('mincg', value, 0.0, 10000.0, False)
|
|
|
|
elif(option == 'bufsize'):
|
|
|
|
sysvals.bufsize = getArgInt('bufsize', value, 1, 1024*1024*8, False)
|
|
|
|
elif(option == 'output-dir'):
|
|
|
|
sysvals.outdir = sysvals.setOutputFolder(value)
|
2016-07-15 21:34:14 +00:00
|
|
|
|
|
|
|
if sysvals.suspendmode == 'command' and not sysvals.testcommand:
|
2016-12-14 18:37:07 +00:00
|
|
|
doError('No command supplied for mode "command"')
|
2016-12-14 18:37:05 +00:00
|
|
|
|
|
|
|
# compatibility errors
|
2016-07-15 21:34:14 +00:00
|
|
|
if sysvals.usedevsrc and sysvals.usecallgraph:
|
2016-12-14 18:37:07 +00:00
|
|
|
doError('-dev is not compatible with -f')
|
2016-12-14 18:37:05 +00:00
|
|
|
if sysvals.usecallgraph and sysvals.useprocmon:
|
2016-12-14 18:37:07 +00:00
|
|
|
doError('-proc is not compatible with -f')
|
2016-07-15 21:34:14 +00:00
|
|
|
|
2016-12-14 18:37:06 +00:00
|
|
|
if overridekprobes:
|
|
|
|
sysvals.tracefuncs = dict()
|
|
|
|
if overridedevkprobes:
|
|
|
|
sysvals.dev_tracefuncs = dict()
|
2016-07-15 21:34:14 +00:00
|
|
|
|
|
|
|
kprobes = dict()
|
2016-12-14 18:37:06 +00:00
|
|
|
kprobesec = 'dev_timeline_functions_'+platform.machine()
|
|
|
|
if kprobesec in sections:
|
|
|
|
for name in Config.options(kprobesec):
|
|
|
|
text = Config.get(kprobesec, name)
|
|
|
|
kprobes[name] = (text, True)
|
|
|
|
kprobesec = 'timeline_functions_'+platform.machine()
|
|
|
|
if kprobesec in sections:
|
|
|
|
for name in Config.options(kprobesec):
|
|
|
|
if name in kprobes:
|
2016-12-14 18:37:07 +00:00
|
|
|
doError('Duplicate timeline function found "%s"' % (name))
|
2016-12-14 18:37:06 +00:00
|
|
|
text = Config.get(kprobesec, name)
|
|
|
|
kprobes[name] = (text, False)
|
2016-07-15 21:34:14 +00:00
|
|
|
|
|
|
|
for name in kprobes:
|
|
|
|
function = name
|
|
|
|
format = name
|
|
|
|
color = ''
|
|
|
|
args = dict()
|
2016-12-14 18:37:06 +00:00
|
|
|
text, dev = kprobes[name]
|
|
|
|
data = text.split()
|
2016-07-15 21:34:14 +00:00
|
|
|
i = 0
|
|
|
|
for val in data:
|
|
|
|
# bracketted strings are special formatting, read them separately
|
|
|
|
if val[0] == '[' and val[-1] == ']':
|
|
|
|
for prop in val[1:-1].split(','):
|
|
|
|
p = prop.split('=')
|
|
|
|
if p[0] == 'color':
|
|
|
|
try:
|
|
|
|
color = int(p[1], 16)
|
|
|
|
color = '#'+p[1]
|
|
|
|
except:
|
|
|
|
color = p[1]
|
|
|
|
continue
|
|
|
|
# first real arg should be the format string
|
|
|
|
if i == 0:
|
|
|
|
format = val
|
|
|
|
# all other args are actual function args
|
|
|
|
else:
|
|
|
|
d = val.split('=')
|
|
|
|
args[d[0]] = d[1]
|
|
|
|
i += 1
|
|
|
|
if not function or not format:
|
2016-12-14 18:37:07 +00:00
|
|
|
doError('Invalid kprobe: %s' % name)
|
2016-07-15 21:34:14 +00:00
|
|
|
for arg in re.findall('{(?P<n>[a-z,A-Z,0-9]*)}', format):
|
|
|
|
if arg not in args:
|
2016-12-14 18:37:07 +00:00
|
|
|
doError('Kprobe "%s" is missing argument "%s"' % (name, arg))
|
2016-12-14 18:37:06 +00:00
|
|
|
if (dev and name in sysvals.dev_tracefuncs) or (not dev and name in sysvals.tracefuncs):
|
2016-12-14 18:37:07 +00:00
|
|
|
doError('Duplicate timeline function found "%s"' % (name))
|
2016-12-14 18:37:06 +00:00
|
|
|
|
|
|
|
kp = {
|
2016-07-15 21:34:14 +00:00
|
|
|
'name': name,
|
|
|
|
'func': function,
|
|
|
|
'format': format,
|
2016-12-14 18:37:06 +00:00
|
|
|
sysvals.archargs: args
|
2016-07-15 21:34:14 +00:00
|
|
|
}
|
|
|
|
if color:
|
2016-12-14 18:37:06 +00:00
|
|
|
kp['color'] = color
|
|
|
|
if dev:
|
|
|
|
sysvals.dev_tracefuncs[name] = kp
|
|
|
|
else:
|
|
|
|
sysvals.tracefuncs[name] = kp
|
2016-07-15 21:34:14 +00:00
|
|
|
|
2014-08-08 16:11:59 +00:00
|
|
|
# Function: printHelp
|
|
|
|
# Description:
|
|
|
|
# print out the help text
|
|
|
|
def printHelp():
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint('\n%s v%s\n'\
|
|
|
|
'Usage: sudo sleepgraph <options> <commands>\n'\
|
|
|
|
'\n'\
|
|
|
|
'Description:\n'\
|
|
|
|
' This tool is designed to assist kernel and OS developers in optimizing\n'\
|
|
|
|
' their linux stack\'s suspend/resume time. Using a kernel image built\n'\
|
|
|
|
' with a few extra options enabled, the tool will execute a suspend and\n'\
|
|
|
|
' capture dmesg and ftrace data until resume is complete. This data is\n'\
|
|
|
|
' transformed into a device timeline and an optional callgraph to give\n'\
|
|
|
|
' a detailed view of which devices/subsystems are taking the most\n'\
|
|
|
|
' time in suspend/resume.\n'\
|
|
|
|
'\n'\
|
|
|
|
' If no specific command is given, the default behavior is to initiate\n'\
|
|
|
|
' a suspend/resume and capture the dmesg/ftrace output as an html timeline.\n'\
|
|
|
|
'\n'\
|
|
|
|
' Generates output files in subdirectory: suspend-yymmdd-HHMMSS\n'\
|
|
|
|
' HTML output: <hostname>_<mode>.html\n'\
|
|
|
|
' raw dmesg output: <hostname>_<mode>_dmesg.txt\n'\
|
|
|
|
' raw ftrace output: <hostname>_<mode>_ftrace.txt\n'\
|
|
|
|
'\n'\
|
|
|
|
'Options:\n'\
|
|
|
|
' -h Print this help text\n'\
|
|
|
|
' -v Print the current tool version\n'\
|
|
|
|
' -config fn Pull arguments and config options from file fn\n'\
|
|
|
|
' -verbose Print extra information during execution and analysis\n'\
|
|
|
|
' -m mode Mode to initiate for suspend (default: %s)\n'\
|
|
|
|
' -o name Overrides the output subdirectory name when running a new test\n'\
|
|
|
|
' default: suspend-{date}-{time}\n'\
|
|
|
|
' -rtcwake t Wakeup t seconds after suspend, set t to "off" to disable (default: 15)\n'\
|
|
|
|
' -addlogs Add the dmesg and ftrace logs to the html output\n'\
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
' -noturbostat Dont use turbostat in freeze mode (default: disabled)\n'\
|
2018-10-08 22:56:32 +00:00
|
|
|
' -srgap Add a visible gap in the timeline between sus/res (default: disabled)\n'\
|
|
|
|
' -skiphtml Run the test and capture the trace logs, but skip the timeline (default: disabled)\n'\
|
|
|
|
' -result fn Export a results table to a text file for parsing.\n'\
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
' -wifi If a wifi connection is available, check that it reconnects after resume.\n'\
|
2018-10-08 22:56:32 +00:00
|
|
|
' [testprep]\n'\
|
|
|
|
' -sync Sync the filesystems before starting the test\n'\
|
|
|
|
' -rs on/off Enable/disable runtime suspend for all devices, restore all after test\n'\
|
|
|
|
' -display m Change the display mode to m for the test (on/off/standby/suspend)\n'\
|
|
|
|
' [advanced]\n'\
|
|
|
|
' -gzip Gzip the trace and dmesg logs to save space\n'\
|
|
|
|
' -cmd {s} Run the timeline over a custom command, e.g. "sync -d"\n'\
|
|
|
|
' -proc Add usermode process info into the timeline (default: disabled)\n'\
|
|
|
|
' -dev Add kernel function calls and threads to the timeline (default: disabled)\n'\
|
|
|
|
' -x2 Run two suspend/resumes back to back (default: disabled)\n'\
|
|
|
|
' -x2delay t Include t ms delay between multiple test runs (default: 0 ms)\n'\
|
|
|
|
' -predelay t Include t ms delay before 1st suspend (default: 0 ms)\n'\
|
|
|
|
' -postdelay t Include t ms delay after last resume (default: 0 ms)\n'\
|
|
|
|
' -mindev ms Discard all device blocks shorter than ms milliseconds (e.g. 0.001 for us)\n'\
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
' -multi n d Execute <n> consecutive tests at <d> seconds intervals. If <n> is followed\n'\
|
|
|
|
' by a "d", "h", or "m" execute for <n> days, hours, or mins instead.\n'\
|
|
|
|
' The outputs will be created in a new subdirectory with a summary page.\n'\
|
|
|
|
' -maxfail n Abort a -multi run after n consecutive fails (default is 0 = never abort)\n'\
|
2018-10-08 22:56:32 +00:00
|
|
|
' [debug]\n'\
|
|
|
|
' -f Use ftrace to create device callgraphs (default: disabled)\n'\
|
2019-05-14 17:53:58 +00:00
|
|
|
' -ftop Use ftrace on the top level call: "%s" (default: disabled)\n'\
|
2018-10-08 22:56:32 +00:00
|
|
|
' -maxdepth N limit the callgraph data to N call levels (default: 0=all)\n'\
|
|
|
|
' -expandcg pre-expand the callgraph data in the html output (default: disabled)\n'\
|
|
|
|
' -fadd file Add functions to be graphed in the timeline from a list in a text file\n'\
|
|
|
|
' -filter "d1,d2,..." Filter out all but this comma-delimited list of device names\n'\
|
|
|
|
' -mincg ms Discard all callgraphs shorter than ms milliseconds (e.g. 0.001 for us)\n'\
|
|
|
|
' -cgphase P Only show callgraph data for phase P (e.g. suspend_late)\n'\
|
|
|
|
' -cgtest N Only show callgraph data for test N (e.g. 0 or 1 in an x2 run)\n'\
|
|
|
|
' -timeprec N Number of significant digits in timestamps (0:S, [3:ms], 6:us)\n'\
|
|
|
|
' -cgfilter S Filter the callgraph output in the timeline\n'\
|
|
|
|
' -cgskip file Callgraph functions to skip, off to disable (default: cgskip.txt)\n'\
|
|
|
|
' -bufsize N Set trace buffer size to N kilo-bytes (default: all of free memory)\n'\
|
|
|
|
' -devdump Print out all the raw device data for each phase\n'\
|
|
|
|
' -cgdump Print out all the raw callgraph data\n'\
|
|
|
|
'\n'\
|
|
|
|
'Other commands:\n'\
|
|
|
|
' -modes List available suspend modes\n'\
|
|
|
|
' -status Test to see if the system is enabled to run this tool\n'\
|
|
|
|
' -fpdt Print out the contents of the ACPI Firmware Performance Data Table\n'\
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
' -wificheck Print out wifi connection info\n'\
|
2018-10-08 22:56:32 +00:00
|
|
|
' -x<mode> Test xset by toggling the given mode (on/off/standby/suspend)\n'\
|
|
|
|
' -sysinfo Print out system info extracted from BIOS\n'\
|
|
|
|
' -devinfo Print out the pm settings of all devices which support runtime suspend\n'\
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
' -cmdinfo Print out all the platform info collected before and after suspend/resume\n'\
|
2018-10-08 22:56:32 +00:00
|
|
|
' -flist Print the list of functions currently being captured in ftrace\n'\
|
|
|
|
' -flistall Print all functions capable of being captured in ftrace\n'\
|
|
|
|
' -summary dir Create a summary of tests in this dir [-genhtml builds missing html]\n'\
|
|
|
|
' [redo]\n'\
|
|
|
|
' -ftrace ftracefile Create HTML output using ftrace input (used with -dmesg)\n'\
|
|
|
|
' -dmesg dmesgfile Create HTML output using dmesg (used with -ftrace)\n'\
|
2019-05-14 17:53:58 +00:00
|
|
|
'' % (sysvals.title, sysvals.version, sysvals.suspendmode, sysvals.ftopfunc))
|
2014-08-08 16:11:59 +00:00
|
|
|
return True
|
2014-01-17 00:18:22 +00:00
|
|
|
|
2014-08-08 16:11:59 +00:00
|
|
|
# ----------------- MAIN --------------------
|
|
|
|
# exec start (skipped if script is loaded as library)
|
|
|
|
if __name__ == '__main__':
|
2018-05-24 16:36:28 +00:00
|
|
|
genhtml = False
|
2014-08-08 16:11:59 +00:00
|
|
|
cmd = ''
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
simplecmds = ['-sysinfo', '-modes', '-fpdt', '-flist', '-flistall',
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
'-devinfo', '-status', '-xon', '-xoff', '-xstandby', '-xsuspend',
|
|
|
|
'-xinit', '-xreset', '-xstat', '-wificheck', '-cmdinfo']
|
2018-01-30 08:17:20 +00:00
|
|
|
if '-f' in sys.argv:
|
|
|
|
sysvals.cgskip = sysvals.configFile('cgskip.txt')
|
2014-08-08 16:11:59 +00:00
|
|
|
# loop through the command line arguments
|
|
|
|
args = iter(sys.argv[1:])
|
|
|
|
for arg in args:
|
|
|
|
if(arg == '-m'):
|
|
|
|
try:
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
val = next(args)
|
2014-08-08 16:11:59 +00:00
|
|
|
except:
|
|
|
|
doError('No mode supplied', True)
|
2016-07-15 21:34:14 +00:00
|
|
|
if val == 'command' and not sysvals.testcommand:
|
|
|
|
doError('No command supplied for mode "command"', True)
|
2014-08-08 16:11:59 +00:00
|
|
|
sysvals.suspendmode = val
|
2016-07-15 21:34:14 +00:00
|
|
|
elif(arg in simplecmds):
|
|
|
|
cmd = arg[1:]
|
|
|
|
elif(arg == '-h'):
|
|
|
|
printHelp()
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
sys.exit(0)
|
2016-07-15 21:34:14 +00:00
|
|
|
elif(arg == '-v'):
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint("Version %s" % sysvals.version)
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
sys.exit(0)
|
2014-08-08 16:11:59 +00:00
|
|
|
elif(arg == '-x2'):
|
|
|
|
sysvals.execcount = 2
|
|
|
|
elif(arg == '-x2delay'):
|
|
|
|
sysvals.x2delay = getArgInt('-x2delay', args, 0, 60000)
|
2016-12-14 18:37:05 +00:00
|
|
|
elif(arg == '-predelay'):
|
|
|
|
sysvals.predelay = getArgInt('-predelay', args, 0, 60000)
|
|
|
|
elif(arg == '-postdelay'):
|
|
|
|
sysvals.postdelay = getArgInt('-postdelay', args, 0, 60000)
|
2014-08-08 16:11:59 +00:00
|
|
|
elif(arg == '-f'):
|
|
|
|
sysvals.usecallgraph = True
|
2019-05-14 17:53:58 +00:00
|
|
|
elif(arg == '-ftop'):
|
|
|
|
sysvals.usecallgraph = True
|
|
|
|
sysvals.ftop = True
|
|
|
|
sysvals.usekprobes = False
|
2018-01-30 08:17:20 +00:00
|
|
|
elif(arg == '-skiphtml'):
|
|
|
|
sysvals.skiphtml = True
|
|
|
|
elif(arg == '-cgdump'):
|
|
|
|
sysvals.cgdump = True
|
2018-10-08 22:56:32 +00:00
|
|
|
elif(arg == '-devdump'):
|
|
|
|
sysvals.devdump = True
|
2018-05-24 16:36:28 +00:00
|
|
|
elif(arg == '-genhtml'):
|
|
|
|
genhtml = True
|
2016-07-15 21:34:14 +00:00
|
|
|
elif(arg == '-addlogs'):
|
2017-07-05 21:42:55 +00:00
|
|
|
sysvals.dmesglog = sysvals.ftracelog = True
|
2019-05-14 17:53:58 +00:00
|
|
|
elif(arg == '-nologs'):
|
|
|
|
sysvals.dmesglog = sysvals.ftracelog = False
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
elif(arg == '-addlogdmesg'):
|
|
|
|
sysvals.dmesglog = True
|
|
|
|
elif(arg == '-addlogftrace'):
|
|
|
|
sysvals.ftracelog = True
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
elif(arg == '-noturbostat'):
|
|
|
|
sysvals.tstat = False
|
2014-08-08 16:11:59 +00:00
|
|
|
elif(arg == '-verbose'):
|
|
|
|
sysvals.verbose = True
|
2016-12-14 18:37:05 +00:00
|
|
|
elif(arg == '-proc'):
|
|
|
|
sysvals.useprocmon = True
|
2016-07-15 21:34:14 +00:00
|
|
|
elif(arg == '-dev'):
|
|
|
|
sysvals.usedevsrc = True
|
2018-01-30 08:17:20 +00:00
|
|
|
elif(arg == '-sync'):
|
|
|
|
sysvals.sync = True
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
elif(arg == '-wifi'):
|
|
|
|
sysvals.wifi = True
|
2018-01-30 08:17:20 +00:00
|
|
|
elif(arg == '-gzip'):
|
|
|
|
sysvals.gzip = True
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
elif(arg == '-info'):
|
|
|
|
try:
|
|
|
|
val = next(args)
|
|
|
|
except:
|
|
|
|
doError('-info requires one string argument', True)
|
2020-11-11 02:36:17 +00:00
|
|
|
elif(arg == '-desc'):
|
|
|
|
try:
|
|
|
|
val = next(args)
|
|
|
|
except:
|
|
|
|
doError('-desc requires one string argument', True)
|
2018-01-30 08:17:20 +00:00
|
|
|
elif(arg == '-rs'):
|
|
|
|
try:
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
val = next(args)
|
2018-01-30 08:17:20 +00:00
|
|
|
except:
|
|
|
|
doError('-rs requires "enable" or "disable"', True)
|
|
|
|
if val.lower() in switchvalues:
|
|
|
|
if val.lower() in switchoff:
|
|
|
|
sysvals.rs = -1
|
|
|
|
else:
|
|
|
|
sysvals.rs = 1
|
|
|
|
else:
|
|
|
|
doError('invalid option: %s, use "enable/disable" or "on/off"' % val, True)
|
|
|
|
elif(arg == '-display'):
|
|
|
|
try:
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
val = next(args)
|
2018-01-30 08:17:20 +00:00
|
|
|
except:
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
doError('-display requires an mode value', True)
|
|
|
|
disopt = ['on', 'off', 'standby', 'suspend']
|
|
|
|
if val.lower() not in disopt:
|
|
|
|
doError('valid display mode values are %s' % disopt, True)
|
|
|
|
sysvals.display = val.lower()
|
2017-04-07 18:05:35 +00:00
|
|
|
elif(arg == '-maxdepth'):
|
|
|
|
sysvals.max_graph_depth = getArgInt('-maxdepth', args, 0, 1000)
|
2014-08-08 16:11:59 +00:00
|
|
|
elif(arg == '-rtcwake'):
|
2017-04-07 18:05:35 +00:00
|
|
|
try:
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
val = next(args)
|
2017-04-07 18:05:35 +00:00
|
|
|
except:
|
|
|
|
doError('No rtcwake time supplied', True)
|
2018-01-30 08:17:20 +00:00
|
|
|
if val.lower() in switchoff:
|
2017-04-07 18:05:35 +00:00
|
|
|
sysvals.rtcwake = False
|
|
|
|
else:
|
|
|
|
sysvals.rtcwake = True
|
|
|
|
sysvals.rtcwaketime = getArgInt('-rtcwake', val, 0, 3600, False)
|
2016-07-15 21:34:14 +00:00
|
|
|
elif(arg == '-timeprec'):
|
|
|
|
sysvals.setPrecision(getArgInt('-timeprec', args, 0, 6))
|
|
|
|
elif(arg == '-mindev'):
|
|
|
|
sysvals.mindevlen = getArgFloat('-mindev', args, 0.0, 10000.0)
|
|
|
|
elif(arg == '-mincg'):
|
|
|
|
sysvals.mincglen = getArgFloat('-mincg', args, 0.0, 10000.0)
|
2018-01-30 08:17:20 +00:00
|
|
|
elif(arg == '-bufsize'):
|
|
|
|
sysvals.bufsize = getArgInt('-bufsize', args, 1, 1024*1024*8)
|
2016-12-14 18:37:07 +00:00
|
|
|
elif(arg == '-cgtest'):
|
|
|
|
sysvals.cgtest = getArgInt('-cgtest', args, 0, 1)
|
|
|
|
elif(arg == '-cgphase'):
|
|
|
|
try:
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
val = next(args)
|
2016-12-14 18:37:07 +00:00
|
|
|
except:
|
|
|
|
doError('No phase name supplied', True)
|
|
|
|
d = Data(0)
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
if val not in d.phasedef:
|
2018-01-30 08:17:20 +00:00
|
|
|
doError('invalid phase --> (%s: %s), valid phases are %s'\
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
% (arg, val, d.phasedef.keys()), True)
|
2016-12-14 18:37:07 +00:00
|
|
|
sysvals.cgphase = val
|
2018-01-30 08:17:20 +00:00
|
|
|
elif(arg == '-cgfilter'):
|
|
|
|
try:
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
val = next(args)
|
2018-01-30 08:17:20 +00:00
|
|
|
except:
|
|
|
|
doError('No callgraph functions supplied', True)
|
|
|
|
sysvals.setCallgraphFilter(val)
|
2019-05-14 17:53:58 +00:00
|
|
|
elif(arg == '-skipkprobe'):
|
|
|
|
try:
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
val = next(args)
|
2019-05-14 17:53:58 +00:00
|
|
|
except:
|
|
|
|
doError('No kprobe functions supplied', True)
|
|
|
|
sysvals.skipKprobes(val)
|
2018-01-30 08:17:20 +00:00
|
|
|
elif(arg == '-cgskip'):
|
|
|
|
try:
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
val = next(args)
|
2018-01-30 08:17:20 +00:00
|
|
|
except:
|
|
|
|
doError('No file supplied', True)
|
|
|
|
if val.lower() in switchoff:
|
|
|
|
sysvals.cgskip = ''
|
|
|
|
else:
|
|
|
|
sysvals.cgskip = sysvals.configFile(val)
|
|
|
|
if(not sysvals.cgskip):
|
|
|
|
doError('%s does not exist' % sysvals.cgskip)
|
2016-12-14 18:37:06 +00:00
|
|
|
elif(arg == '-callloop-maxgap'):
|
|
|
|
sysvals.callloopmaxgap = getArgFloat('-callloop-maxgap', args, 0.0, 1.0)
|
|
|
|
elif(arg == '-callloop-maxlen'):
|
|
|
|
sysvals.callloopmaxlen = getArgFloat('-callloop-maxlen', args, 0.0, 1.0)
|
2016-07-15 21:34:14 +00:00
|
|
|
elif(arg == '-cmd'):
|
|
|
|
try:
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
val = next(args)
|
2016-07-15 21:34:14 +00:00
|
|
|
except:
|
|
|
|
doError('No command string supplied', True)
|
|
|
|
sysvals.testcommand = val
|
|
|
|
sysvals.suspendmode = 'command'
|
|
|
|
elif(arg == '-expandcg'):
|
|
|
|
sysvals.cgexp = True
|
|
|
|
elif(arg == '-srgap'):
|
|
|
|
sysvals.srgap = 5
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
elif(arg == '-maxfail'):
|
|
|
|
sysvals.maxfail = getArgInt('-maxfail', args, 0, 1000000)
|
2014-08-08 16:11:59 +00:00
|
|
|
elif(arg == '-multi'):
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
try:
|
|
|
|
c, d = next(args), next(args)
|
|
|
|
except:
|
|
|
|
doError('-multi requires two values', True)
|
|
|
|
sysvals.multiinit(c, d)
|
2016-07-15 21:34:14 +00:00
|
|
|
elif(arg == '-o'):
|
|
|
|
try:
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
val = next(args)
|
2016-07-15 21:34:14 +00:00
|
|
|
except:
|
|
|
|
doError('No subdirectory name supplied', True)
|
2018-01-30 08:17:20 +00:00
|
|
|
sysvals.outdir = sysvals.setOutputFolder(val)
|
2016-07-15 21:34:14 +00:00
|
|
|
elif(arg == '-config'):
|
|
|
|
try:
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
val = next(args)
|
2016-07-15 21:34:14 +00:00
|
|
|
except:
|
|
|
|
doError('No text file supplied', True)
|
2018-01-30 08:17:20 +00:00
|
|
|
file = sysvals.configFile(val)
|
|
|
|
if(not file):
|
2016-12-14 18:37:07 +00:00
|
|
|
doError('%s does not exist' % val)
|
2018-01-30 08:17:20 +00:00
|
|
|
configFromFile(file)
|
2016-07-15 21:34:14 +00:00
|
|
|
elif(arg == '-fadd'):
|
|
|
|
try:
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
val = next(args)
|
2016-07-15 21:34:14 +00:00
|
|
|
except:
|
|
|
|
doError('No text file supplied', True)
|
2018-01-30 08:17:20 +00:00
|
|
|
file = sysvals.configFile(val)
|
|
|
|
if(not file):
|
2016-12-14 18:37:07 +00:00
|
|
|
doError('%s does not exist' % val)
|
2018-01-30 08:17:20 +00:00
|
|
|
sysvals.addFtraceFilterFunctions(file)
|
2014-08-08 16:11:59 +00:00
|
|
|
elif(arg == '-dmesg'):
|
|
|
|
try:
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
val = next(args)
|
2014-08-08 16:11:59 +00:00
|
|
|
except:
|
|
|
|
doError('No dmesg file supplied', True)
|
|
|
|
sysvals.notestrun = True
|
|
|
|
sysvals.dmesgfile = val
|
|
|
|
if(os.path.exists(sysvals.dmesgfile) == False):
|
2016-12-14 18:37:07 +00:00
|
|
|
doError('%s does not exist' % sysvals.dmesgfile)
|
2014-08-08 16:11:59 +00:00
|
|
|
elif(arg == '-ftrace'):
|
|
|
|
try:
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
val = next(args)
|
2014-08-08 16:11:59 +00:00
|
|
|
except:
|
|
|
|
doError('No ftrace file supplied', True)
|
|
|
|
sysvals.notestrun = True
|
|
|
|
sysvals.ftracefile = val
|
|
|
|
if(os.path.exists(sysvals.ftracefile) == False):
|
2016-12-14 18:37:07 +00:00
|
|
|
doError('%s does not exist' % sysvals.ftracefile)
|
2014-08-08 16:11:59 +00:00
|
|
|
elif(arg == '-summary'):
|
|
|
|
try:
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
val = next(args)
|
2014-08-08 16:11:59 +00:00
|
|
|
except:
|
|
|
|
doError('No directory supplied', True)
|
|
|
|
cmd = 'summary'
|
2018-01-30 08:17:20 +00:00
|
|
|
sysvals.outdir = val
|
2014-08-08 16:11:59 +00:00
|
|
|
sysvals.notestrun = True
|
|
|
|
if(os.path.isdir(val) == False):
|
2021-03-18 20:22:23 +00:00
|
|
|
doError('%s is not accessible' % val)
|
2014-08-08 16:11:59 +00:00
|
|
|
elif(arg == '-filter'):
|
|
|
|
try:
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
val = next(args)
|
2014-08-08 16:11:59 +00:00
|
|
|
except:
|
|
|
|
doError('No devnames supplied', True)
|
|
|
|
sysvals.setDeviceFilter(val)
|
2018-01-30 08:17:20 +00:00
|
|
|
elif(arg == '-result'):
|
|
|
|
try:
|
pm-graph v5.5
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3.
Both now simply require python, the system can choose which to use.
bootgraph python3 update:
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- open dmesg log and popen in binary, use decode(ascii, ignore)
- sort all html data to allow diff between python versions
- change exception handler to use python3 as instead of comma
sleepgraph python3 update:
- import configparser not ConfigParser (p2 needs python-configparser)
- add floor function to handle integer arithmetic
- change argument loop to use next() instead of args.next()
- handle popen output in binary, use decode(ascii, ignore)
- sort all html/output data to allow diff between python versions
- force gzip open to use text mode, same for file open
- ensure no binary data is written to logs (ascii convert devprops info)
- use codecs library to handle zlib encoding for mcelog data
- remove all uses of python3.7 keyword "async" as members or vars
- assume all FPDT and DMI data is in binary string form
sleepgraph:
- turbostat will be used by default if it's found & the mode is freeze
- a new option "-noturbostat" will disable its use
- fix bug where two callgraphs with the same start time overwrite.
- fix s2idle processing where two suspend/resume_machines occur back2back
- update getexec function to use which first (assuming PATH exists)
- new platforminfo data in log with: lspci, gpe counts, /proc/interrupts
- new data is zipped, b64 encoded, and tacked on the end of ftrace
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 21:08:44 +00:00
|
|
|
val = next(args)
|
2018-01-30 08:17:20 +00:00
|
|
|
except:
|
|
|
|
doError('No result file supplied', True)
|
|
|
|
sysvals.result = val
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
sysvals.signalHandlerInit()
|
2014-08-08 16:11:59 +00:00
|
|
|
else:
|
|
|
|
doError('Invalid argument: '+arg, True)
|
|
|
|
|
2016-12-14 18:37:05 +00:00
|
|
|
# compatibility errors
|
|
|
|
if(sysvals.usecallgraph and sysvals.usedevsrc):
|
2016-12-14 18:37:07 +00:00
|
|
|
doError('-dev is not compatible with -f')
|
2016-12-14 18:37:05 +00:00
|
|
|
if(sysvals.usecallgraph and sysvals.useprocmon):
|
2016-12-14 18:37:07 +00:00
|
|
|
doError('-proc is not compatible with -f')
|
2016-12-14 18:37:05 +00:00
|
|
|
|
2018-01-30 08:17:20 +00:00
|
|
|
if sysvals.usecallgraph and sysvals.cgskip:
|
|
|
|
sysvals.vprint('Using cgskip file: %s' % sysvals.cgskip)
|
|
|
|
sysvals.setCallgraphBlacklist(sysvals.cgskip)
|
|
|
|
|
2016-07-15 21:34:14 +00:00
|
|
|
# callgraph size cannot exceed device size
|
|
|
|
if sysvals.mincglen < sysvals.mindevlen:
|
|
|
|
sysvals.mincglen = sysvals.mindevlen
|
|
|
|
|
2018-01-30 08:17:20 +00:00
|
|
|
# remove existing buffers before calculating memory
|
|
|
|
if(sysvals.usecallgraph or sysvals.usedevsrc):
|
|
|
|
sysvals.fsetVal('16', 'buffer_size_kb')
|
2017-07-05 21:42:55 +00:00
|
|
|
sysvals.cpuInfo()
|
2018-01-30 08:17:20 +00:00
|
|
|
|
|
|
|
# just run a utility command and exit
|
2014-08-08 16:11:59 +00:00
|
|
|
if(cmd != ''):
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
ret = 0
|
2014-08-08 16:11:59 +00:00
|
|
|
if(cmd == 'status'):
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
if not statusCheck(True):
|
|
|
|
ret = 1
|
2014-08-08 16:11:59 +00:00
|
|
|
elif(cmd == 'fpdt'):
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
if not getFPDT(True):
|
|
|
|
ret = 1
|
2017-07-05 21:42:55 +00:00
|
|
|
elif(cmd == 'sysinfo'):
|
2018-01-30 08:17:20 +00:00
|
|
|
sysvals.printSystemInfo(True)
|
|
|
|
elif(cmd == 'devinfo'):
|
|
|
|
deviceInfo()
|
2014-08-08 16:11:59 +00:00
|
|
|
elif(cmd == 'modes'):
|
2019-05-14 17:53:58 +00:00
|
|
|
pprint(getModes())
|
2016-07-15 21:34:14 +00:00
|
|
|
elif(cmd == 'flist'):
|
|
|
|
sysvals.getFtraceFilterFunctions(True)
|
|
|
|
elif(cmd == 'flistall'):
|
|
|
|
sysvals.getFtraceFilterFunctions(False)
|
2014-08-08 16:11:59 +00:00
|
|
|
elif(cmd == 'summary'):
|
2018-05-24 16:36:28 +00:00
|
|
|
runSummary(sysvals.outdir, True, genhtml)
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
elif(cmd in ['xon', 'xoff', 'xstandby', 'xsuspend', 'xinit', 'xreset']):
|
|
|
|
sysvals.verbose = True
|
2020-11-11 02:36:17 +00:00
|
|
|
ret = sysvals.displayControl(cmd[1:])
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
elif(cmd == 'xstat'):
|
2020-11-11 02:36:17 +00:00
|
|
|
pprint('Display Status: %s' % sysvals.displayControl('stat').upper())
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
elif(cmd == 'wificheck'):
|
|
|
|
dev = sysvals.checkWifi()
|
|
|
|
if dev:
|
|
|
|
print('%s is connected' % sysvals.wifiDetails(dev))
|
2019-05-14 17:53:58 +00:00
|
|
|
else:
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
print('No wifi connection found')
|
|
|
|
elif(cmd == 'cmdinfo'):
|
|
|
|
for out in sysvals.cmdinfo(False, True):
|
|
|
|
print('[%s - %s]\n%s\n' % out)
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
sys.exit(ret)
|
2014-08-08 16:11:59 +00:00
|
|
|
|
|
|
|
# if instructed, re-analyze existing data files
|
|
|
|
if(sysvals.notestrun):
|
2019-05-14 17:53:58 +00:00
|
|
|
stamp = rerunTest(sysvals.outdir)
|
2018-01-30 08:17:20 +00:00
|
|
|
sysvals.outputResult(stamp)
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
sys.exit(0)
|
2014-08-08 16:11:59 +00:00
|
|
|
|
|
|
|
# verify that we can run a test
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
error = statusCheck()
|
|
|
|
if(error):
|
|
|
|
doError(error)
|
2014-08-08 16:11:59 +00:00
|
|
|
|
2018-10-08 22:56:32 +00:00
|
|
|
# extract mem/disk extra modes and convert
|
2017-07-05 21:42:55 +00:00
|
|
|
mode = sysvals.suspendmode
|
2018-10-08 22:56:32 +00:00
|
|
|
if mode.startswith('mem'):
|
|
|
|
memmode = mode.split('-', 1)[-1] if '-' in mode else 'deep'
|
2017-07-05 21:42:55 +00:00
|
|
|
if memmode == 'shallow':
|
|
|
|
mode = 'standby'
|
|
|
|
elif memmode == 's2idle':
|
|
|
|
mode = 'freeze'
|
|
|
|
else:
|
|
|
|
mode = 'mem'
|
|
|
|
sysvals.memmode = memmode
|
|
|
|
sysvals.suspendmode = mode
|
2018-10-08 22:56:32 +00:00
|
|
|
if mode.startswith('disk-'):
|
|
|
|
sysvals.diskmode = mode.split('-', 1)[-1]
|
|
|
|
sysvals.suspendmode = 'disk'
|
2017-07-05 21:42:55 +00:00
|
|
|
sysvals.systemInfo(dmidecode(sysvals.mempath))
|
|
|
|
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
failcnt, ret = 0, 0
|
2018-01-30 08:17:20 +00:00
|
|
|
if sysvals.multitest['run']:
|
2016-07-15 21:34:14 +00:00
|
|
|
# run multiple tests in a separate subdirectory
|
2018-01-30 08:17:20 +00:00
|
|
|
if not sysvals.outdir:
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
if 'time' in sysvals.multitest:
|
|
|
|
s = '-%dm' % sysvals.multitest['time']
|
|
|
|
else:
|
|
|
|
s = '-x%d' % sysvals.multitest['count']
|
|
|
|
sysvals.outdir = datetime.now().strftime('suspend-%y%m%d-%H%M%S'+s)
|
2018-01-30 08:17:20 +00:00
|
|
|
if not os.path.isdir(sysvals.outdir):
|
2019-05-14 17:53:58 +00:00
|
|
|
os.makedirs(sysvals.outdir)
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
sysvals.sudoUserchown(sysvals.outdir)
|
|
|
|
finish = datetime.now()
|
|
|
|
if 'time' in sysvals.multitest:
|
|
|
|
finish += timedelta(minutes=sysvals.multitest['time'])
|
2018-01-30 08:17:20 +00:00
|
|
|
for i in range(sysvals.multitest['count']):
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
sysvals.multistat(True, i, finish)
|
|
|
|
if i != 0 and sysvals.multitest['delay'] > 0:
|
2018-10-08 22:56:32 +00:00
|
|
|
pprint('Waiting %d seconds...' % (sysvals.multitest['delay']))
|
2018-01-30 08:17:20 +00:00
|
|
|
time.sleep(sysvals.multitest['delay'])
|
2017-07-05 21:42:55 +00:00
|
|
|
fmt = 'suspend-%y%m%d-%H%M%S'
|
2018-01-30 08:17:20 +00:00
|
|
|
sysvals.testdir = os.path.join(sysvals.outdir, datetime.now().strftime(fmt))
|
pm-graph v5.6
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 17:58:19 +00:00
|
|
|
ret = runTest(i+1, True)
|
|
|
|
failcnt = 0 if not ret else failcnt + 1
|
|
|
|
if sysvals.maxfail > 0 and failcnt >= sysvals.maxfail:
|
|
|
|
pprint('Maximum fail count of %d reached, aborting multitest' % (sysvals.maxfail))
|
|
|
|
break
|
|
|
|
time.sleep(5)
|
|
|
|
sysvals.resetlog()
|
|
|
|
sysvals.multistat(False, i, finish)
|
|
|
|
if 'time' in sysvals.multitest and datetime.now() >= finish:
|
|
|
|
break
|
2018-01-30 08:17:20 +00:00
|
|
|
if not sysvals.skiphtml:
|
2018-05-24 16:36:28 +00:00
|
|
|
runSummary(sysvals.outdir, False, False)
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
sysvals.sudoUserchown(sysvals.outdir)
|
2014-08-08 16:11:59 +00:00
|
|
|
else:
|
2018-01-30 08:17:20 +00:00
|
|
|
if sysvals.outdir:
|
|
|
|
sysvals.testdir = sysvals.outdir
|
2014-08-08 16:11:59 +00:00
|
|
|
# run the test in the current directory
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
ret = runTest()
|
2020-11-11 02:36:17 +00:00
|
|
|
|
|
|
|
# reset to default values after testing
|
2018-01-30 08:17:20 +00:00
|
|
|
if sysvals.display:
|
2020-11-11 02:36:17 +00:00
|
|
|
sysvals.displayControl('reset')
|
|
|
|
if sysvals.rs != 0:
|
|
|
|
sysvals.setRuntimeSuspend(False)
|
PM / tools: sleepgraph: first batch of v5.2 changes
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08 22:56:31 +00:00
|
|
|
sys.exit(ret)
|