linux-stable/include/linux/kallsyms.h

179 lines
4.4 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
/* SPDX-License-Identifier: GPL-2.0 */
/* Rewritten and vastly simplified by Rusty Russell for in-kernel
* module loader:
* Copyright 2002 Rusty Russell <rusty@rustcorp.com.au> IBM Corporation
*/
#ifndef _LINUX_KALLSYMS_H
#define _LINUX_KALLSYMS_H
#include <linux/errno.h>
module: add printk formats to add module build ID to stacktraces Let's make kernel stacktraces easier to identify by including the build ID[1] of a module if the stacktrace is printing a symbol from a module. This makes it simpler for developers to locate a kernel module's full debuginfo for a particular stacktrace. Combined with scripts/decode_stracktrace.sh, a developer can download the matching debuginfo from a debuginfod[2] server and find the exact file and line number for the functions plus offsets in a stacktrace that match the module. This is especially useful for pstore crash debugging where the kernel crashes are recorded in something like console-ramoops and the recovery kernel/modules are different or the debuginfo doesn't exist on the device due to space concerns (the debuginfo can be too large for space limited devices). Originally, I put this on the %pS format, but that was quickly rejected given that %pS is used in other places such as ftrace where build IDs aren't meaningful. There was some discussions on the list to put every module build ID into the "Modules linked in:" section of the stacktrace message but that quickly becomes very hard to read once you have more than three or four modules linked in. It also provides too much information when we don't expect each module to be traversed in a stacktrace. Having the build ID for modules that aren't important just makes things messy. Splitting it to multiple lines for each module quickly explodes the number of lines printed in an oops too, possibly wrapping the warning off the console. And finally, trying to stash away each module used in a callstack to provide the ID of each symbol printed is cumbersome and would require changes to each architecture to stash away modules and return their build IDs once unwinding has completed. Instead, we opt for the simpler approach of introducing new printk formats '%pS[R]b' for "pointer symbolic backtrace with module build ID" and '%pBb' for "pointer backtrace with module build ID" and then updating the few places in the architecture layer where the stacktrace is printed to use this new format. Before: Call trace: lkdtm_WARNING+0x28/0x30 [lkdtm] direct_entry+0x16c/0x1b4 [lkdtm] full_proxy_write+0x74/0xa4 vfs_write+0xec/0x2e8 After: Call trace: lkdtm_WARNING+0x28/0x30 [lkdtm 6c2215028606bda50de823490723dc4bc5bf46f9] direct_entry+0x16c/0x1b4 [lkdtm 6c2215028606bda50de823490723dc4bc5bf46f9] full_proxy_write+0x74/0xa4 vfs_write+0xec/0x2e8 [akpm@linux-foundation.org: fix build with CONFIG_MODULES=n, tweak code layout] [rdunlap@infradead.org: fix build when CONFIG_MODULES is not set] Link: https://lkml.kernel.org/r/20210513171510.20328-1-rdunlap@infradead.org [akpm@linux-foundation.org: make kallsyms_lookup_buildid() static] [cuibixuan@huawei.com: fix build error when CONFIG_SYSFS is disabled] Link: https://lkml.kernel.org/r/20210525105049.34804-1-cuibixuan@huawei.com Link: https://lkml.kernel.org/r/20210511003845.2429846-6-swboyd@chromium.org Link: https://fedoraproject.org/wiki/Releases/FeatureBuildId [1] Link: https://sourceware.org/elfutils/Debuginfod.html [2] Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bixuan Cui <cuibixuan@huawei.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Evan Green <evgreen@chromium.org> Cc: Hsin-Yi Wang <hsinyi@chromium.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Matthew Wilcox <willy@infradead.org> Cc: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Sasha Levin <sashal@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-08 01:09:20 +00:00
#include <linux/buildid.h>
#include <linux/kernel.h>
#include <linux/stddef.h>
symbol lookup: introduce dereference_symbol_descriptor() dereference_symbol_descriptor() invokes appropriate ARCH specific function descriptor dereference callbacks: - dereference_kernel_function_descriptor() if the pointer is a kernel symbol; - dereference_module_function_descriptor() if the pointer is a module symbol. This is the last step needed to make '%pS/%ps' smart enough to handle function descriptor dereference on affected ARCHs and to retire '%pF/%pf'. To refresh it: Some architectures (ia64, ppc64, parisc64) use an indirect pointer for C function pointers - the function pointer points to a function descriptor and we need to dereference it to get the actual function pointer. Function descriptors live in .opd elf section and all affected ARCHs (ia64, ppc64, parisc64) handle it properly for kernel and modules. So we, technically, can decide if the dereference is needed by simply looking at the pointer: if it belongs to .opd section then we need to dereference it. The kernel and modules have their own .opd sections, obviously, that's why we need to split dereference_function_descriptor() and use separate kernel and module dereference arch callbacks. Link: http://lkml.kernel.org/r/20171206043649.GB15885@jagdpanzerIV Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: James Bottomley <jejb@parisc-linux.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linux-ia64@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Tested-by: Tony Luck <tony.luck@intel.com> #ia64 Tested-by: Santosh Sivaraj <santosh@fossix.org> #powerpc Tested-by: Helge Deller <deller@gmx.de> #parisc64 Signed-off-by: Petr Mladek <pmladek@suse.com>
2017-12-06 04:36:49 +00:00
#include <linux/mm.h>
#include <linux/module.h>
#include <asm/sections.h>
#define KSYM_NAME_LEN 128
module: add printk formats to add module build ID to stacktraces Let's make kernel stacktraces easier to identify by including the build ID[1] of a module if the stacktrace is printing a symbol from a module. This makes it simpler for developers to locate a kernel module's full debuginfo for a particular stacktrace. Combined with scripts/decode_stracktrace.sh, a developer can download the matching debuginfo from a debuginfod[2] server and find the exact file and line number for the functions plus offsets in a stacktrace that match the module. This is especially useful for pstore crash debugging where the kernel crashes are recorded in something like console-ramoops and the recovery kernel/modules are different or the debuginfo doesn't exist on the device due to space concerns (the debuginfo can be too large for space limited devices). Originally, I put this on the %pS format, but that was quickly rejected given that %pS is used in other places such as ftrace where build IDs aren't meaningful. There was some discussions on the list to put every module build ID into the "Modules linked in:" section of the stacktrace message but that quickly becomes very hard to read once you have more than three or four modules linked in. It also provides too much information when we don't expect each module to be traversed in a stacktrace. Having the build ID for modules that aren't important just makes things messy. Splitting it to multiple lines for each module quickly explodes the number of lines printed in an oops too, possibly wrapping the warning off the console. And finally, trying to stash away each module used in a callstack to provide the ID of each symbol printed is cumbersome and would require changes to each architecture to stash away modules and return their build IDs once unwinding has completed. Instead, we opt for the simpler approach of introducing new printk formats '%pS[R]b' for "pointer symbolic backtrace with module build ID" and '%pBb' for "pointer backtrace with module build ID" and then updating the few places in the architecture layer where the stacktrace is printed to use this new format. Before: Call trace: lkdtm_WARNING+0x28/0x30 [lkdtm] direct_entry+0x16c/0x1b4 [lkdtm] full_proxy_write+0x74/0xa4 vfs_write+0xec/0x2e8 After: Call trace: lkdtm_WARNING+0x28/0x30 [lkdtm 6c2215028606bda50de823490723dc4bc5bf46f9] direct_entry+0x16c/0x1b4 [lkdtm 6c2215028606bda50de823490723dc4bc5bf46f9] full_proxy_write+0x74/0xa4 vfs_write+0xec/0x2e8 [akpm@linux-foundation.org: fix build with CONFIG_MODULES=n, tweak code layout] [rdunlap@infradead.org: fix build when CONFIG_MODULES is not set] Link: https://lkml.kernel.org/r/20210513171510.20328-1-rdunlap@infradead.org [akpm@linux-foundation.org: make kallsyms_lookup_buildid() static] [cuibixuan@huawei.com: fix build error when CONFIG_SYSFS is disabled] Link: https://lkml.kernel.org/r/20210525105049.34804-1-cuibixuan@huawei.com Link: https://lkml.kernel.org/r/20210511003845.2429846-6-swboyd@chromium.org Link: https://fedoraproject.org/wiki/Releases/FeatureBuildId [1] Link: https://sourceware.org/elfutils/Debuginfod.html [2] Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bixuan Cui <cuibixuan@huawei.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Evan Green <evgreen@chromium.org> Cc: Hsin-Yi Wang <hsinyi@chromium.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Matthew Wilcox <willy@infradead.org> Cc: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Sasha Levin <sashal@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-08 01:09:20 +00:00
#define KSYM_SYMBOL_LEN (sizeof("%s+%#lx/%#lx [%s %s]") + \
(KSYM_NAME_LEN - 1) + \
2*(BITS_PER_LONG*3/10) + (MODULE_NAME_LEN - 1) + \
(BUILD_ID_SIZE_MAX * 2) + 1)
struct cred;
struct module;
symbol lookup: introduce dereference_symbol_descriptor() dereference_symbol_descriptor() invokes appropriate ARCH specific function descriptor dereference callbacks: - dereference_kernel_function_descriptor() if the pointer is a kernel symbol; - dereference_module_function_descriptor() if the pointer is a module symbol. This is the last step needed to make '%pS/%ps' smart enough to handle function descriptor dereference on affected ARCHs and to retire '%pF/%pf'. To refresh it: Some architectures (ia64, ppc64, parisc64) use an indirect pointer for C function pointers - the function pointer points to a function descriptor and we need to dereference it to get the actual function pointer. Function descriptors live in .opd elf section and all affected ARCHs (ia64, ppc64, parisc64) handle it properly for kernel and modules. So we, technically, can decide if the dereference is needed by simply looking at the pointer: if it belongs to .opd section then we need to dereference it. The kernel and modules have their own .opd sections, obviously, that's why we need to split dereference_function_descriptor() and use separate kernel and module dereference arch callbacks. Link: http://lkml.kernel.org/r/20171206043649.GB15885@jagdpanzerIV Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: James Bottomley <jejb@parisc-linux.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linux-ia64@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Tested-by: Tony Luck <tony.luck@intel.com> #ia64 Tested-by: Santosh Sivaraj <santosh@fossix.org> #powerpc Tested-by: Helge Deller <deller@gmx.de> #parisc64 Signed-off-by: Petr Mladek <pmladek@suse.com>
2017-12-06 04:36:49 +00:00
static inline int is_kernel_text(unsigned long addr)
{
if (__is_kernel_text(addr))
symbol lookup: introduce dereference_symbol_descriptor() dereference_symbol_descriptor() invokes appropriate ARCH specific function descriptor dereference callbacks: - dereference_kernel_function_descriptor() if the pointer is a kernel symbol; - dereference_module_function_descriptor() if the pointer is a module symbol. This is the last step needed to make '%pS/%ps' smart enough to handle function descriptor dereference on affected ARCHs and to retire '%pF/%pf'. To refresh it: Some architectures (ia64, ppc64, parisc64) use an indirect pointer for C function pointers - the function pointer points to a function descriptor and we need to dereference it to get the actual function pointer. Function descriptors live in .opd elf section and all affected ARCHs (ia64, ppc64, parisc64) handle it properly for kernel and modules. So we, technically, can decide if the dereference is needed by simply looking at the pointer: if it belongs to .opd section then we need to dereference it. The kernel and modules have their own .opd sections, obviously, that's why we need to split dereference_function_descriptor() and use separate kernel and module dereference arch callbacks. Link: http://lkml.kernel.org/r/20171206043649.GB15885@jagdpanzerIV Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: James Bottomley <jejb@parisc-linux.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linux-ia64@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Tested-by: Tony Luck <tony.luck@intel.com> #ia64 Tested-by: Santosh Sivaraj <santosh@fossix.org> #powerpc Tested-by: Helge Deller <deller@gmx.de> #parisc64 Signed-off-by: Petr Mladek <pmladek@suse.com>
2017-12-06 04:36:49 +00:00
return 1;
return in_gate_area_no_mm(addr);
}
static inline int is_kernel(unsigned long addr)
{
if (__is_kernel(addr))
symbol lookup: introduce dereference_symbol_descriptor() dereference_symbol_descriptor() invokes appropriate ARCH specific function descriptor dereference callbacks: - dereference_kernel_function_descriptor() if the pointer is a kernel symbol; - dereference_module_function_descriptor() if the pointer is a module symbol. This is the last step needed to make '%pS/%ps' smart enough to handle function descriptor dereference on affected ARCHs and to retire '%pF/%pf'. To refresh it: Some architectures (ia64, ppc64, parisc64) use an indirect pointer for C function pointers - the function pointer points to a function descriptor and we need to dereference it to get the actual function pointer. Function descriptors live in .opd elf section and all affected ARCHs (ia64, ppc64, parisc64) handle it properly for kernel and modules. So we, technically, can decide if the dereference is needed by simply looking at the pointer: if it belongs to .opd section then we need to dereference it. The kernel and modules have their own .opd sections, obviously, that's why we need to split dereference_function_descriptor() and use separate kernel and module dereference arch callbacks. Link: http://lkml.kernel.org/r/20171206043649.GB15885@jagdpanzerIV Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: James Bottomley <jejb@parisc-linux.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linux-ia64@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Tested-by: Tony Luck <tony.luck@intel.com> #ia64 Tested-by: Santosh Sivaraj <santosh@fossix.org> #powerpc Tested-by: Helge Deller <deller@gmx.de> #parisc64 Signed-off-by: Petr Mladek <pmladek@suse.com>
2017-12-06 04:36:49 +00:00
return 1;
return in_gate_area_no_mm(addr);
}
static inline int is_ksym_addr(unsigned long addr)
{
if (IS_ENABLED(CONFIG_KALLSYMS_ALL))
return is_kernel(addr);
return is_kernel_text(addr) || is_kernel_inittext(addr);
}
static inline void *dereference_symbol_descriptor(void *ptr)
{
#ifdef CONFIG_HAVE_FUNCTION_DESCRIPTORS
symbol lookup: introduce dereference_symbol_descriptor() dereference_symbol_descriptor() invokes appropriate ARCH specific function descriptor dereference callbacks: - dereference_kernel_function_descriptor() if the pointer is a kernel symbol; - dereference_module_function_descriptor() if the pointer is a module symbol. This is the last step needed to make '%pS/%ps' smart enough to handle function descriptor dereference on affected ARCHs and to retire '%pF/%pf'. To refresh it: Some architectures (ia64, ppc64, parisc64) use an indirect pointer for C function pointers - the function pointer points to a function descriptor and we need to dereference it to get the actual function pointer. Function descriptors live in .opd elf section and all affected ARCHs (ia64, ppc64, parisc64) handle it properly for kernel and modules. So we, technically, can decide if the dereference is needed by simply looking at the pointer: if it belongs to .opd section then we need to dereference it. The kernel and modules have their own .opd sections, obviously, that's why we need to split dereference_function_descriptor() and use separate kernel and module dereference arch callbacks. Link: http://lkml.kernel.org/r/20171206043649.GB15885@jagdpanzerIV Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: James Bottomley <jejb@parisc-linux.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linux-ia64@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Tested-by: Tony Luck <tony.luck@intel.com> #ia64 Tested-by: Santosh Sivaraj <santosh@fossix.org> #powerpc Tested-by: Helge Deller <deller@gmx.de> #parisc64 Signed-off-by: Petr Mladek <pmladek@suse.com>
2017-12-06 04:36:49 +00:00
struct module *mod;
ptr = dereference_kernel_function_descriptor(ptr);
if (is_ksym_addr((unsigned long)ptr))
return ptr;
preempt_disable();
mod = __module_address((unsigned long)ptr);
preempt_enable();
if (mod)
ptr = dereference_module_function_descriptor(mod, ptr);
#endif
return ptr;
}
#ifdef CONFIG_KALLSYMS
int kallsyms_on_each_symbol(int (*fn)(void *, const char *, struct module *,
unsigned long),
void *data);
/* Lookup the address for a symbol. Returns 0 if not found. */
unsigned long kallsyms_lookup_name(const char *name);
extern int kallsyms_lookup_size_offset(unsigned long addr,
unsigned long *symbolsize,
unsigned long *offset);
/* Lookup an address. modname is set to NULL if it's in the kernel. */
const char *kallsyms_lookup(unsigned long addr,
unsigned long *symbolsize,
unsigned long *offset,
char **modname, char *namebuf);
/* Look up a kernel symbol and return it in a text buffer. */
extern int sprint_symbol(char *buffer, unsigned long address);
module: add printk formats to add module build ID to stacktraces Let's make kernel stacktraces easier to identify by including the build ID[1] of a module if the stacktrace is printing a symbol from a module. This makes it simpler for developers to locate a kernel module's full debuginfo for a particular stacktrace. Combined with scripts/decode_stracktrace.sh, a developer can download the matching debuginfo from a debuginfod[2] server and find the exact file and line number for the functions plus offsets in a stacktrace that match the module. This is especially useful for pstore crash debugging where the kernel crashes are recorded in something like console-ramoops and the recovery kernel/modules are different or the debuginfo doesn't exist on the device due to space concerns (the debuginfo can be too large for space limited devices). Originally, I put this on the %pS format, but that was quickly rejected given that %pS is used in other places such as ftrace where build IDs aren't meaningful. There was some discussions on the list to put every module build ID into the "Modules linked in:" section of the stacktrace message but that quickly becomes very hard to read once you have more than three or four modules linked in. It also provides too much information when we don't expect each module to be traversed in a stacktrace. Having the build ID for modules that aren't important just makes things messy. Splitting it to multiple lines for each module quickly explodes the number of lines printed in an oops too, possibly wrapping the warning off the console. And finally, trying to stash away each module used in a callstack to provide the ID of each symbol printed is cumbersome and would require changes to each architecture to stash away modules and return their build IDs once unwinding has completed. Instead, we opt for the simpler approach of introducing new printk formats '%pS[R]b' for "pointer symbolic backtrace with module build ID" and '%pBb' for "pointer backtrace with module build ID" and then updating the few places in the architecture layer where the stacktrace is printed to use this new format. Before: Call trace: lkdtm_WARNING+0x28/0x30 [lkdtm] direct_entry+0x16c/0x1b4 [lkdtm] full_proxy_write+0x74/0xa4 vfs_write+0xec/0x2e8 After: Call trace: lkdtm_WARNING+0x28/0x30 [lkdtm 6c2215028606bda50de823490723dc4bc5bf46f9] direct_entry+0x16c/0x1b4 [lkdtm 6c2215028606bda50de823490723dc4bc5bf46f9] full_proxy_write+0x74/0xa4 vfs_write+0xec/0x2e8 [akpm@linux-foundation.org: fix build with CONFIG_MODULES=n, tweak code layout] [rdunlap@infradead.org: fix build when CONFIG_MODULES is not set] Link: https://lkml.kernel.org/r/20210513171510.20328-1-rdunlap@infradead.org [akpm@linux-foundation.org: make kallsyms_lookup_buildid() static] [cuibixuan@huawei.com: fix build error when CONFIG_SYSFS is disabled] Link: https://lkml.kernel.org/r/20210525105049.34804-1-cuibixuan@huawei.com Link: https://lkml.kernel.org/r/20210511003845.2429846-6-swboyd@chromium.org Link: https://fedoraproject.org/wiki/Releases/FeatureBuildId [1] Link: https://sourceware.org/elfutils/Debuginfod.html [2] Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bixuan Cui <cuibixuan@huawei.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Evan Green <evgreen@chromium.org> Cc: Hsin-Yi Wang <hsinyi@chromium.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Matthew Wilcox <willy@infradead.org> Cc: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Sasha Levin <sashal@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-08 01:09:20 +00:00
extern int sprint_symbol_build_id(char *buffer, unsigned long address);
extern int sprint_symbol_no_offset(char *buffer, unsigned long address);
extern int sprint_backtrace(char *buffer, unsigned long address);
module: add printk formats to add module build ID to stacktraces Let's make kernel stacktraces easier to identify by including the build ID[1] of a module if the stacktrace is printing a symbol from a module. This makes it simpler for developers to locate a kernel module's full debuginfo for a particular stacktrace. Combined with scripts/decode_stracktrace.sh, a developer can download the matching debuginfo from a debuginfod[2] server and find the exact file and line number for the functions plus offsets in a stacktrace that match the module. This is especially useful for pstore crash debugging where the kernel crashes are recorded in something like console-ramoops and the recovery kernel/modules are different or the debuginfo doesn't exist on the device due to space concerns (the debuginfo can be too large for space limited devices). Originally, I put this on the %pS format, but that was quickly rejected given that %pS is used in other places such as ftrace where build IDs aren't meaningful. There was some discussions on the list to put every module build ID into the "Modules linked in:" section of the stacktrace message but that quickly becomes very hard to read once you have more than three or four modules linked in. It also provides too much information when we don't expect each module to be traversed in a stacktrace. Having the build ID for modules that aren't important just makes things messy. Splitting it to multiple lines for each module quickly explodes the number of lines printed in an oops too, possibly wrapping the warning off the console. And finally, trying to stash away each module used in a callstack to provide the ID of each symbol printed is cumbersome and would require changes to each architecture to stash away modules and return their build IDs once unwinding has completed. Instead, we opt for the simpler approach of introducing new printk formats '%pS[R]b' for "pointer symbolic backtrace with module build ID" and '%pBb' for "pointer backtrace with module build ID" and then updating the few places in the architecture layer where the stacktrace is printed to use this new format. Before: Call trace: lkdtm_WARNING+0x28/0x30 [lkdtm] direct_entry+0x16c/0x1b4 [lkdtm] full_proxy_write+0x74/0xa4 vfs_write+0xec/0x2e8 After: Call trace: lkdtm_WARNING+0x28/0x30 [lkdtm 6c2215028606bda50de823490723dc4bc5bf46f9] direct_entry+0x16c/0x1b4 [lkdtm 6c2215028606bda50de823490723dc4bc5bf46f9] full_proxy_write+0x74/0xa4 vfs_write+0xec/0x2e8 [akpm@linux-foundation.org: fix build with CONFIG_MODULES=n, tweak code layout] [rdunlap@infradead.org: fix build when CONFIG_MODULES is not set] Link: https://lkml.kernel.org/r/20210513171510.20328-1-rdunlap@infradead.org [akpm@linux-foundation.org: make kallsyms_lookup_buildid() static] [cuibixuan@huawei.com: fix build error when CONFIG_SYSFS is disabled] Link: https://lkml.kernel.org/r/20210525105049.34804-1-cuibixuan@huawei.com Link: https://lkml.kernel.org/r/20210511003845.2429846-6-swboyd@chromium.org Link: https://fedoraproject.org/wiki/Releases/FeatureBuildId [1] Link: https://sourceware.org/elfutils/Debuginfod.html [2] Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bixuan Cui <cuibixuan@huawei.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Evan Green <evgreen@chromium.org> Cc: Hsin-Yi Wang <hsinyi@chromium.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Matthew Wilcox <willy@infradead.org> Cc: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Sasha Levin <sashal@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-08 01:09:20 +00:00
extern int sprint_backtrace_build_id(char *buffer, unsigned long address);
int lookup_symbol_name(unsigned long addr, char *symname);
int lookup_symbol_attrs(unsigned long addr, unsigned long *size, unsigned long *offset, char *modname, char *name);
/* How and when do we show kallsyms values? */
extern bool kallsyms_show_value(const struct cred *cred);
#else /* !CONFIG_KALLSYMS */
static inline unsigned long kallsyms_lookup_name(const char *name)
{
return 0;
}
static inline int kallsyms_lookup_size_offset(unsigned long addr,
unsigned long *symbolsize,
unsigned long *offset)
{
return 0;
}
static inline const char *kallsyms_lookup(unsigned long addr,
unsigned long *symbolsize,
unsigned long *offset,
char **modname, char *namebuf)
{
return NULL;
}
static inline int sprint_symbol(char *buffer, unsigned long addr)
{
*buffer = '\0';
return 0;
}
module: add printk formats to add module build ID to stacktraces Let's make kernel stacktraces easier to identify by including the build ID[1] of a module if the stacktrace is printing a symbol from a module. This makes it simpler for developers to locate a kernel module's full debuginfo for a particular stacktrace. Combined with scripts/decode_stracktrace.sh, a developer can download the matching debuginfo from a debuginfod[2] server and find the exact file and line number for the functions plus offsets in a stacktrace that match the module. This is especially useful for pstore crash debugging where the kernel crashes are recorded in something like console-ramoops and the recovery kernel/modules are different or the debuginfo doesn't exist on the device due to space concerns (the debuginfo can be too large for space limited devices). Originally, I put this on the %pS format, but that was quickly rejected given that %pS is used in other places such as ftrace where build IDs aren't meaningful. There was some discussions on the list to put every module build ID into the "Modules linked in:" section of the stacktrace message but that quickly becomes very hard to read once you have more than three or four modules linked in. It also provides too much information when we don't expect each module to be traversed in a stacktrace. Having the build ID for modules that aren't important just makes things messy. Splitting it to multiple lines for each module quickly explodes the number of lines printed in an oops too, possibly wrapping the warning off the console. And finally, trying to stash away each module used in a callstack to provide the ID of each symbol printed is cumbersome and would require changes to each architecture to stash away modules and return their build IDs once unwinding has completed. Instead, we opt for the simpler approach of introducing new printk formats '%pS[R]b' for "pointer symbolic backtrace with module build ID" and '%pBb' for "pointer backtrace with module build ID" and then updating the few places in the architecture layer where the stacktrace is printed to use this new format. Before: Call trace: lkdtm_WARNING+0x28/0x30 [lkdtm] direct_entry+0x16c/0x1b4 [lkdtm] full_proxy_write+0x74/0xa4 vfs_write+0xec/0x2e8 After: Call trace: lkdtm_WARNING+0x28/0x30 [lkdtm 6c2215028606bda50de823490723dc4bc5bf46f9] direct_entry+0x16c/0x1b4 [lkdtm 6c2215028606bda50de823490723dc4bc5bf46f9] full_proxy_write+0x74/0xa4 vfs_write+0xec/0x2e8 [akpm@linux-foundation.org: fix build with CONFIG_MODULES=n, tweak code layout] [rdunlap@infradead.org: fix build when CONFIG_MODULES is not set] Link: https://lkml.kernel.org/r/20210513171510.20328-1-rdunlap@infradead.org [akpm@linux-foundation.org: make kallsyms_lookup_buildid() static] [cuibixuan@huawei.com: fix build error when CONFIG_SYSFS is disabled] Link: https://lkml.kernel.org/r/20210525105049.34804-1-cuibixuan@huawei.com Link: https://lkml.kernel.org/r/20210511003845.2429846-6-swboyd@chromium.org Link: https://fedoraproject.org/wiki/Releases/FeatureBuildId [1] Link: https://sourceware.org/elfutils/Debuginfod.html [2] Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bixuan Cui <cuibixuan@huawei.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Evan Green <evgreen@chromium.org> Cc: Hsin-Yi Wang <hsinyi@chromium.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Matthew Wilcox <willy@infradead.org> Cc: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Sasha Levin <sashal@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-08 01:09:20 +00:00
static inline int sprint_symbol_build_id(char *buffer, unsigned long address)
{
*buffer = '\0';
return 0;
}
static inline int sprint_symbol_no_offset(char *buffer, unsigned long addr)
{
*buffer = '\0';
return 0;
}
static inline int sprint_backtrace(char *buffer, unsigned long addr)
{
*buffer = '\0';
return 0;
}
module: add printk formats to add module build ID to stacktraces Let's make kernel stacktraces easier to identify by including the build ID[1] of a module if the stacktrace is printing a symbol from a module. This makes it simpler for developers to locate a kernel module's full debuginfo for a particular stacktrace. Combined with scripts/decode_stracktrace.sh, a developer can download the matching debuginfo from a debuginfod[2] server and find the exact file and line number for the functions plus offsets in a stacktrace that match the module. This is especially useful for pstore crash debugging where the kernel crashes are recorded in something like console-ramoops and the recovery kernel/modules are different or the debuginfo doesn't exist on the device due to space concerns (the debuginfo can be too large for space limited devices). Originally, I put this on the %pS format, but that was quickly rejected given that %pS is used in other places such as ftrace where build IDs aren't meaningful. There was some discussions on the list to put every module build ID into the "Modules linked in:" section of the stacktrace message but that quickly becomes very hard to read once you have more than three or four modules linked in. It also provides too much information when we don't expect each module to be traversed in a stacktrace. Having the build ID for modules that aren't important just makes things messy. Splitting it to multiple lines for each module quickly explodes the number of lines printed in an oops too, possibly wrapping the warning off the console. And finally, trying to stash away each module used in a callstack to provide the ID of each symbol printed is cumbersome and would require changes to each architecture to stash away modules and return their build IDs once unwinding has completed. Instead, we opt for the simpler approach of introducing new printk formats '%pS[R]b' for "pointer symbolic backtrace with module build ID" and '%pBb' for "pointer backtrace with module build ID" and then updating the few places in the architecture layer where the stacktrace is printed to use this new format. Before: Call trace: lkdtm_WARNING+0x28/0x30 [lkdtm] direct_entry+0x16c/0x1b4 [lkdtm] full_proxy_write+0x74/0xa4 vfs_write+0xec/0x2e8 After: Call trace: lkdtm_WARNING+0x28/0x30 [lkdtm 6c2215028606bda50de823490723dc4bc5bf46f9] direct_entry+0x16c/0x1b4 [lkdtm 6c2215028606bda50de823490723dc4bc5bf46f9] full_proxy_write+0x74/0xa4 vfs_write+0xec/0x2e8 [akpm@linux-foundation.org: fix build with CONFIG_MODULES=n, tweak code layout] [rdunlap@infradead.org: fix build when CONFIG_MODULES is not set] Link: https://lkml.kernel.org/r/20210513171510.20328-1-rdunlap@infradead.org [akpm@linux-foundation.org: make kallsyms_lookup_buildid() static] [cuibixuan@huawei.com: fix build error when CONFIG_SYSFS is disabled] Link: https://lkml.kernel.org/r/20210525105049.34804-1-cuibixuan@huawei.com Link: https://lkml.kernel.org/r/20210511003845.2429846-6-swboyd@chromium.org Link: https://fedoraproject.org/wiki/Releases/FeatureBuildId [1] Link: https://sourceware.org/elfutils/Debuginfod.html [2] Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bixuan Cui <cuibixuan@huawei.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Evan Green <evgreen@chromium.org> Cc: Hsin-Yi Wang <hsinyi@chromium.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Matthew Wilcox <willy@infradead.org> Cc: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Sasha Levin <sashal@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-08 01:09:20 +00:00
static inline int sprint_backtrace_build_id(char *buffer, unsigned long addr)
{
*buffer = '\0';
return 0;
}
static inline int lookup_symbol_name(unsigned long addr, char *symname)
{
return -ERANGE;
}
static inline int lookup_symbol_attrs(unsigned long addr, unsigned long *size, unsigned long *offset, char *modname, char *name)
{
return -ERANGE;
}
static inline bool kallsyms_show_value(const struct cred *cred)
{
return false;
}
static inline int kallsyms_on_each_symbol(int (*fn)(void *, const char *, struct module *,
unsigned long), void *data)
{
return -EOPNOTSUPP;
}
#endif /*CONFIG_KALLSYMS*/
kallsyms/printk: add loglvl to print_ip_sym() Patch series "Add log level to show_stack()", v3. Add log level argument to show_stack(). Done in three stages: 1. Introducing show_stack_loglvl() for every architecture 2. Migrating old users with an explicit log level 3. Renaming show_stack_loglvl() into show_stack() Justification: - It's a design mistake to move a business-logic decision into platform realization detail. - I have currently two patches sets that would benefit from this work: Removing console_loglevel jumps in sysrq driver [1] Hung task warning before panic [2] - suggested by Tetsuo (but he probably didn't realise what it would involve). - While doing (1), (2) the backtraces were adjusted to headers and other messages for each situation - so there won't be a situation when the backtrace is printed, but the headers are missing because they have lesser log level (or the reverse). - As the result in (2) plays with console_loglevel for kdb are removed. The least important for upstream, but maybe still worth to note that every company I've worked in so far had an off-list patch to print backtrace with the needed log level (but only for the architecture they cared about). If you have other ideas how you will benefit from show_stack() with a log level - please, reply to this cover letter. See also discussion on v1: https://lore.kernel.org/linux-riscv/20191106083538.z5nlpuf64cigxigh@pathway.suse.cz/ This patch (of 50): print_ip_sym() needs to have a log level parameter to comply with other parts being printed. Otherwise, half of the expected backtrace would be printed and other may be missing with some logging level. The following callee(s) are using now the adjusted log level: - microblaze/unwind: the same level as headers & userspace unwind. Note that pr_debug()'s there are for debugging the unwinder itself. - nds32/traps: symbol addresses are printed with the same log level as backtrace headers. - lockdep: ip for locking issues is printed with the same log level as other part of the warning. - sched: ip where preemption was disabled is printed as error like the rest part of the message. - ftrace: bug reports are now consistent in the log level being used. Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Ben Segall <bsegall@google.com> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Burton <paulburton@kernel.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Will Deacon <will@kernel.org> Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: Dmitry Safonov <dima@arista.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com> Cc: Mark Salter <msalter@redhat.com> Cc: Guo Ren <guoren@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Brian Cain <bcain@codeaurora.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ley Foon Tan <lftan@altera.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Rich Felker <dalias@libc.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Jason Wessel <jason.wessel@windriver.com> Link: http://lkml.kernel.org/r/20200418201944.482088-2-dima@arista.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 04:29:56 +00:00
static inline void print_ip_sym(const char *loglvl, unsigned long ip)
{
kallsyms/printk: add loglvl to print_ip_sym() Patch series "Add log level to show_stack()", v3. Add log level argument to show_stack(). Done in three stages: 1. Introducing show_stack_loglvl() for every architecture 2. Migrating old users with an explicit log level 3. Renaming show_stack_loglvl() into show_stack() Justification: - It's a design mistake to move a business-logic decision into platform realization detail. - I have currently two patches sets that would benefit from this work: Removing console_loglevel jumps in sysrq driver [1] Hung task warning before panic [2] - suggested by Tetsuo (but he probably didn't realise what it would involve). - While doing (1), (2) the backtraces were adjusted to headers and other messages for each situation - so there won't be a situation when the backtrace is printed, but the headers are missing because they have lesser log level (or the reverse). - As the result in (2) plays with console_loglevel for kdb are removed. The least important for upstream, but maybe still worth to note that every company I've worked in so far had an off-list patch to print backtrace with the needed log level (but only for the architecture they cared about). If you have other ideas how you will benefit from show_stack() with a log level - please, reply to this cover letter. See also discussion on v1: https://lore.kernel.org/linux-riscv/20191106083538.z5nlpuf64cigxigh@pathway.suse.cz/ This patch (of 50): print_ip_sym() needs to have a log level parameter to comply with other parts being printed. Otherwise, half of the expected backtrace would be printed and other may be missing with some logging level. The following callee(s) are using now the adjusted log level: - microblaze/unwind: the same level as headers & userspace unwind. Note that pr_debug()'s there are for debugging the unwinder itself. - nds32/traps: symbol addresses are printed with the same log level as backtrace headers. - lockdep: ip for locking issues is printed with the same log level as other part of the warning. - sched: ip where preemption was disabled is printed as error like the rest part of the message. - ftrace: bug reports are now consistent in the log level being used. Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Ben Segall <bsegall@google.com> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Burton <paulburton@kernel.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Will Deacon <will@kernel.org> Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: Dmitry Safonov <dima@arista.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com> Cc: Mark Salter <msalter@redhat.com> Cc: Guo Ren <guoren@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Brian Cain <bcain@codeaurora.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ley Foon Tan <lftan@altera.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Rich Felker <dalias@libc.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Jason Wessel <jason.wessel@windriver.com> Link: http://lkml.kernel.org/r/20200418201944.482088-2-dima@arista.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 04:29:56 +00:00
printk("%s[<%px>] %pS\n", loglvl, (void *) ip, (void *) ip);
}
#endif /*_LINUX_KALLSYMS_H*/