linux-stable/fs/xfs/xfs_symlink.c

554 lines
12 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2000-2006 Silicon Graphics, Inc.
* Copyright (c) 2012-2013 Red Hat, Inc.
* All rights reserved.
*/
#include "xfs.h"
#include "xfs_shared.h"
#include "xfs_fs.h"
#include "xfs_format.h"
#include "xfs_log_format.h"
#include "xfs_trans_resv.h"
#include "xfs_bit.h"
#include "xfs_mount.h"
#include "xfs_da_format.h"
#include "xfs_da_btree.h"
#include "xfs_defer.h"
#include "xfs_dir2.h"
#include "xfs_inode.h"
#include "xfs_ialloc.h"
#include "xfs_alloc.h"
#include "xfs_bmap.h"
#include "xfs_bmap_btree.h"
#include "xfs_bmap_util.h"
#include "xfs_error.h"
#include "xfs_quota.h"
#include "xfs_trans_space.h"
#include "xfs_trace.h"
#include "xfs_symlink.h"
#include "xfs_trans.h"
#include "xfs_log.h"
/* ----- Kernel only functions below ----- */
int
xfs_readlink_bmap_ilocked(
struct xfs_inode *ip,
char *link)
{
struct xfs_mount *mp = ip->i_mount;
struct xfs_bmbt_irec mval[XFS_SYMLINK_MAPS];
struct xfs_buf *bp;
xfs_daddr_t d;
char *cur_chunk;
int pathlen = ip->i_d.di_size;
int nmaps = XFS_SYMLINK_MAPS;
int byte_cnt;
int n;
int error = 0;
int fsblocks = 0;
int offset;
ASSERT(xfs_isilocked(ip, XFS_ILOCK_SHARED | XFS_ILOCK_EXCL));
fsblocks = xfs_symlink_blocks(mp, pathlen);
error = xfs_bmapi_read(ip, 0, fsblocks, mval, &nmaps, 0);
if (error)
goto out;
offset = 0;
for (n = 0; n < nmaps; n++) {
d = XFS_FSB_TO_DADDR(mp, mval[n].br_startblock);
byte_cnt = XFS_FSB_TO_B(mp, mval[n].br_blockcount);
bp = xfs_buf_read(mp->m_ddev_targp, d, BTOBB(byte_cnt), 0,
&xfs_symlink_buf_ops);
if (!bp)
return -ENOMEM;
error = bp->b_error;
if (error) {
xfs_buf_ioerror_alert(bp, __func__);
xfs_buf_relse(bp);
/* bad CRC means corrupted metadata */
if (error == -EFSBADCRC)
error = -EFSCORRUPTED;
goto out;
}
byte_cnt = XFS_SYMLINK_BUF_SPACE(mp, byte_cnt);
if (pathlen < byte_cnt)
byte_cnt = pathlen;
cur_chunk = bp->b_addr;
if (xfs_sb_version_hascrc(&mp->m_sb)) {
if (!xfs_symlink_hdr_ok(ip->i_ino, offset,
byte_cnt, bp)) {
error = -EFSCORRUPTED;
xfs_alert(mp,
"symlink header does not match required off/len/owner (0x%x/Ox%x,0x%llx)",
offset, byte_cnt, ip->i_ino);
xfs_buf_relse(bp);
goto out;
}
cur_chunk += sizeof(struct xfs_dsymlink_hdr);
}
memcpy(link + offset, cur_chunk, byte_cnt);
pathlen -= byte_cnt;
offset += byte_cnt;
xfs_buf_relse(bp);
}
ASSERT(pathlen == 0);
link[ip->i_d.di_size] = '\0';
error = 0;
out:
return error;
}
int
xfs_readlink(
struct xfs_inode *ip,
char *link)
{
struct xfs_mount *mp = ip->i_mount;
xfs_fsize_t pathlen;
int error = 0;
trace_xfs_readlink(ip);
ASSERT(!(ip->i_df.if_flags & XFS_IFINLINE));
if (XFS_FORCED_SHUTDOWN(mp))
return -EIO;
xfs_ilock(ip, XFS_ILOCK_SHARED);
pathlen = ip->i_d.di_size;
if (!pathlen)
goto out;
if (pathlen < 0 || pathlen > XFS_SYMLINK_MAXLEN) {
xfs_alert(mp, "%s: inode (%llu) bad symlink length (%lld)",
__func__, (unsigned long long) ip->i_ino,
(long long) pathlen);
ASSERT(0);
error = -EFSCORRUPTED;
goto out;
}
error = xfs_readlink_bmap_ilocked(ip, link);
out:
xfs_iunlock(ip, XFS_ILOCK_SHARED);
return error;
}
int
xfs_symlink(
struct xfs_inode *dp,
struct xfs_name *link_name,
const char *target_path,
umode_t mode,
struct xfs_inode **ipp)
{
struct xfs_mount *mp = dp->i_mount;
struct xfs_trans *tp = NULL;
struct xfs_inode *ip = NULL;
int error = 0;
int pathlen;
struct xfs_defer_ops dfops;
xfs: inodes are new until the dentry cache is set up Al Viro noticed a generic set of issues to do with filehandle lookup racing with dentry cache setup. They involve a filehandle lookup occurring while an inode is being created and the filehandle lookup racing with the dentry creation for the real file. This can lead to multiple dentries for the one path being instantiated. There are a host of other issues around this same set of paths. The underlying cause is that file handle lookup only waits on inode cache instantiation rather than full dentry cache instantiation. XFS is mostly immune to the problems discovered due to it's own internal inode cache, but there are a couple of corner cases where races can happen. We currently clear the XFS_INEW flag when the inode is fully set up after insertion into the cache. Newly allocated inodes are inserted locked and so aren't usable until the allocation transaction commits. This, however, occurs before the dentry and security information is fully initialised and hence the inode is unlocked and available for lookups to find too early. To solve the problem, only clear the XFS_INEW flag for newly created inodes once the dentry is fully instantiated. This means lookups will retry until the XFS_INEW flag is removed from the inode and hence avoids the race conditions in questions. THis also means that xfs_create(), xfs_create_tmpfile() and xfs_symlink() need to finish the setup of the inode in their error paths if we had allocated the inode but failed later in the creation process. xfs_symlink(), in particular, needed a lot of help to make it's error handling match that of xfs_create(). Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-23 11:38:08 +00:00
bool unlock_dp_on_error = false;
xfs_fileoff_t first_fsb;
xfs_filblks_t fs_blocks;
int nmaps;
struct xfs_bmbt_irec mval[XFS_SYMLINK_MAPS];
xfs_daddr_t d;
const char *cur_chunk;
int byte_cnt;
int n;
xfs_buf_t *bp;
prid_t prid;
struct xfs_dquot *udqp = NULL;
struct xfs_dquot *gdqp = NULL;
struct xfs_dquot *pdqp = NULL;
uint resblks;
*ipp = NULL;
trace_xfs_symlink(dp, link_name);
if (XFS_FORCED_SHUTDOWN(mp))
return -EIO;
/*
* Check component lengths of the target path name.
*/
pathlen = strlen(target_path);
if (pathlen >= XFS_SYMLINK_MAXLEN) /* total string too long */
return -ENAMETOOLONG;
udqp = gdqp = NULL;
prid = xfs_get_initial_prid(dp);
/*
* Make sure that we have allocated dquot(s) on disk.
*/
error = xfs_qm_vop_dqalloc(dp,
xfs_kuid_to_uid(current_fsuid()),
xfs_kgid_to_gid(current_fsgid()), prid,
XFS_QMOPT_QUOTALL | XFS_QMOPT_INHERIT,
&udqp, &gdqp, &pdqp);
if (error)
xfs: inodes are new until the dentry cache is set up Al Viro noticed a generic set of issues to do with filehandle lookup racing with dentry cache setup. They involve a filehandle lookup occurring while an inode is being created and the filehandle lookup racing with the dentry creation for the real file. This can lead to multiple dentries for the one path being instantiated. There are a host of other issues around this same set of paths. The underlying cause is that file handle lookup only waits on inode cache instantiation rather than full dentry cache instantiation. XFS is mostly immune to the problems discovered due to it's own internal inode cache, but there are a couple of corner cases where races can happen. We currently clear the XFS_INEW flag when the inode is fully set up after insertion into the cache. Newly allocated inodes are inserted locked and so aren't usable until the allocation transaction commits. This, however, occurs before the dentry and security information is fully initialised and hence the inode is unlocked and available for lookups to find too early. To solve the problem, only clear the XFS_INEW flag for newly created inodes once the dentry is fully instantiated. This means lookups will retry until the XFS_INEW flag is removed from the inode and hence avoids the race conditions in questions. THis also means that xfs_create(), xfs_create_tmpfile() and xfs_symlink() need to finish the setup of the inode in their error paths if we had allocated the inode but failed later in the creation process. xfs_symlink(), in particular, needed a lot of help to make it's error handling match that of xfs_create(). Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-23 11:38:08 +00:00
return error;
/*
* The symlink will fit into the inode data fork?
* There can't be any attributes so we get the whole variable part.
*/
if (pathlen <= XFS_LITINO(mp, dp->i_d.di_version))
fs_blocks = 0;
else
fs_blocks = xfs_symlink_blocks(mp, pathlen);
resblks = XFS_SYMLINK_SPACE_RES(mp, link_name->len, fs_blocks);
error = xfs_trans_alloc(mp, &M_RES(mp)->tr_symlink, resblks, 0, 0, &tp);
if (error)
goto out_release_inode;
xfs_ilock(dp, XFS_ILOCK_EXCL | XFS_ILOCK_PARENT);
unlock_dp_on_error = true;
/*
* Check whether the directory allows new symlinks or not.
*/
if (dp->i_d.di_flags & XFS_DIFLAG_NOSYMLINKS) {
error = -EPERM;
xfs: inodes are new until the dentry cache is set up Al Viro noticed a generic set of issues to do with filehandle lookup racing with dentry cache setup. They involve a filehandle lookup occurring while an inode is being created and the filehandle lookup racing with the dentry creation for the real file. This can lead to multiple dentries for the one path being instantiated. There are a host of other issues around this same set of paths. The underlying cause is that file handle lookup only waits on inode cache instantiation rather than full dentry cache instantiation. XFS is mostly immune to the problems discovered due to it's own internal inode cache, but there are a couple of corner cases where races can happen. We currently clear the XFS_INEW flag when the inode is fully set up after insertion into the cache. Newly allocated inodes are inserted locked and so aren't usable until the allocation transaction commits. This, however, occurs before the dentry and security information is fully initialised and hence the inode is unlocked and available for lookups to find too early. To solve the problem, only clear the XFS_INEW flag for newly created inodes once the dentry is fully instantiated. This means lookups will retry until the XFS_INEW flag is removed from the inode and hence avoids the race conditions in questions. THis also means that xfs_create(), xfs_create_tmpfile() and xfs_symlink() need to finish the setup of the inode in their error paths if we had allocated the inode but failed later in the creation process. xfs_symlink(), in particular, needed a lot of help to make it's error handling match that of xfs_create(). Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-23 11:38:08 +00:00
goto out_trans_cancel;
}
/*
* Reserve disk quota : blocks and inode.
*/
error = xfs_trans_reserve_quota(tp, mp, udqp, gdqp,
pdqp, resblks, 1, 0);
if (error)
xfs: inodes are new until the dentry cache is set up Al Viro noticed a generic set of issues to do with filehandle lookup racing with dentry cache setup. They involve a filehandle lookup occurring while an inode is being created and the filehandle lookup racing with the dentry creation for the real file. This can lead to multiple dentries for the one path being instantiated. There are a host of other issues around this same set of paths. The underlying cause is that file handle lookup only waits on inode cache instantiation rather than full dentry cache instantiation. XFS is mostly immune to the problems discovered due to it's own internal inode cache, but there are a couple of corner cases where races can happen. We currently clear the XFS_INEW flag when the inode is fully set up after insertion into the cache. Newly allocated inodes are inserted locked and so aren't usable until the allocation transaction commits. This, however, occurs before the dentry and security information is fully initialised and hence the inode is unlocked and available for lookups to find too early. To solve the problem, only clear the XFS_INEW flag for newly created inodes once the dentry is fully instantiated. This means lookups will retry until the XFS_INEW flag is removed from the inode and hence avoids the race conditions in questions. THis also means that xfs_create(), xfs_create_tmpfile() and xfs_symlink() need to finish the setup of the inode in their error paths if we had allocated the inode but failed later in the creation process. xfs_symlink(), in particular, needed a lot of help to make it's error handling match that of xfs_create(). Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-23 11:38:08 +00:00
goto out_trans_cancel;
/*
* Initialize the bmap freelist prior to calling either
* bmapi or the directory create code.
*/
xfs_defer_init(tp, &dfops, &tp->t_firstblock);
/*
* Allocate an inode for the symlink.
*/
error = xfs_dir_ialloc(&tp, dp, S_IFLNK | (mode & ~S_IFMT), 1, 0,
prid, &ip);
xfs: inodes are new until the dentry cache is set up Al Viro noticed a generic set of issues to do with filehandle lookup racing with dentry cache setup. They involve a filehandle lookup occurring while an inode is being created and the filehandle lookup racing with the dentry creation for the real file. This can lead to multiple dentries for the one path being instantiated. There are a host of other issues around this same set of paths. The underlying cause is that file handle lookup only waits on inode cache instantiation rather than full dentry cache instantiation. XFS is mostly immune to the problems discovered due to it's own internal inode cache, but there are a couple of corner cases where races can happen. We currently clear the XFS_INEW flag when the inode is fully set up after insertion into the cache. Newly allocated inodes are inserted locked and so aren't usable until the allocation transaction commits. This, however, occurs before the dentry and security information is fully initialised and hence the inode is unlocked and available for lookups to find too early. To solve the problem, only clear the XFS_INEW flag for newly created inodes once the dentry is fully instantiated. This means lookups will retry until the XFS_INEW flag is removed from the inode and hence avoids the race conditions in questions. THis also means that xfs_create(), xfs_create_tmpfile() and xfs_symlink() need to finish the setup of the inode in their error paths if we had allocated the inode but failed later in the creation process. xfs_symlink(), in particular, needed a lot of help to make it's error handling match that of xfs_create(). Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-23 11:38:08 +00:00
if (error)
goto out_trans_cancel;
/*
xfs: inodes are new until the dentry cache is set up Al Viro noticed a generic set of issues to do with filehandle lookup racing with dentry cache setup. They involve a filehandle lookup occurring while an inode is being created and the filehandle lookup racing with the dentry creation for the real file. This can lead to multiple dentries for the one path being instantiated. There are a host of other issues around this same set of paths. The underlying cause is that file handle lookup only waits on inode cache instantiation rather than full dentry cache instantiation. XFS is mostly immune to the problems discovered due to it's own internal inode cache, but there are a couple of corner cases where races can happen. We currently clear the XFS_INEW flag when the inode is fully set up after insertion into the cache. Newly allocated inodes are inserted locked and so aren't usable until the allocation transaction commits. This, however, occurs before the dentry and security information is fully initialised and hence the inode is unlocked and available for lookups to find too early. To solve the problem, only clear the XFS_INEW flag for newly created inodes once the dentry is fully instantiated. This means lookups will retry until the XFS_INEW flag is removed from the inode and hence avoids the race conditions in questions. THis also means that xfs_create(), xfs_create_tmpfile() and xfs_symlink() need to finish the setup of the inode in their error paths if we had allocated the inode but failed later in the creation process. xfs_symlink(), in particular, needed a lot of help to make it's error handling match that of xfs_create(). Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-23 11:38:08 +00:00
* Now we join the directory inode to the transaction. We do not do it
* earlier because xfs_dir_ialloc might commit the previous transaction
* (and release all the locks). An error from here on will result in
* the transaction cancel unlocking dp so don't do it explicitly in the
* error path.
*/
xfs_trans_ijoin(tp, dp, XFS_ILOCK_EXCL);
unlock_dp_on_error = false;
/*
* Also attach the dquot(s) to it, if applicable.
*/
xfs_qm_vop_create_dqattach(tp, ip, udqp, gdqp, pdqp);
if (resblks)
resblks -= XFS_IALLOC_SPACE_RES(mp);
/*
* If the symlink will fit into the inode, write it inline.
*/
if (pathlen <= XFS_IFORK_DSIZE(ip)) {
xfs_init_local_fork(ip, XFS_DATA_FORK, target_path, pathlen);
ip->i_d.di_size = pathlen;
ip->i_d.di_format = XFS_DINODE_FMT_LOCAL;
xfs_trans_log_inode(tp, ip, XFS_ILOG_DDATA | XFS_ILOG_CORE);
} else {
int offset;
first_fsb = 0;
nmaps = XFS_SYMLINK_MAPS;
error = xfs_bmapi_write(tp, ip, first_fsb, fs_blocks,
XFS_BMAPI_METADATA, &tp->t_firstblock,
resblks, mval, &nmaps);
if (error)
xfs: inodes are new until the dentry cache is set up Al Viro noticed a generic set of issues to do with filehandle lookup racing with dentry cache setup. They involve a filehandle lookup occurring while an inode is being created and the filehandle lookup racing with the dentry creation for the real file. This can lead to multiple dentries for the one path being instantiated. There are a host of other issues around this same set of paths. The underlying cause is that file handle lookup only waits on inode cache instantiation rather than full dentry cache instantiation. XFS is mostly immune to the problems discovered due to it's own internal inode cache, but there are a couple of corner cases where races can happen. We currently clear the XFS_INEW flag when the inode is fully set up after insertion into the cache. Newly allocated inodes are inserted locked and so aren't usable until the allocation transaction commits. This, however, occurs before the dentry and security information is fully initialised and hence the inode is unlocked and available for lookups to find too early. To solve the problem, only clear the XFS_INEW flag for newly created inodes once the dentry is fully instantiated. This means lookups will retry until the XFS_INEW flag is removed from the inode and hence avoids the race conditions in questions. THis also means that xfs_create(), xfs_create_tmpfile() and xfs_symlink() need to finish the setup of the inode in their error paths if we had allocated the inode but failed later in the creation process. xfs_symlink(), in particular, needed a lot of help to make it's error handling match that of xfs_create(). Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-23 11:38:08 +00:00
goto out_bmap_cancel;
if (resblks)
resblks -= fs_blocks;
ip->i_d.di_size = pathlen;
xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
cur_chunk = target_path;
offset = 0;
for (n = 0; n < nmaps; n++) {
char *buf;
d = XFS_FSB_TO_DADDR(mp, mval[n].br_startblock);
byte_cnt = XFS_FSB_TO_B(mp, mval[n].br_blockcount);
bp = xfs_trans_get_buf(tp, mp->m_ddev_targp, d,
BTOBB(byte_cnt), 0);
if (!bp) {
error = -ENOMEM;
xfs: inodes are new until the dentry cache is set up Al Viro noticed a generic set of issues to do with filehandle lookup racing with dentry cache setup. They involve a filehandle lookup occurring while an inode is being created and the filehandle lookup racing with the dentry creation for the real file. This can lead to multiple dentries for the one path being instantiated. There are a host of other issues around this same set of paths. The underlying cause is that file handle lookup only waits on inode cache instantiation rather than full dentry cache instantiation. XFS is mostly immune to the problems discovered due to it's own internal inode cache, but there are a couple of corner cases where races can happen. We currently clear the XFS_INEW flag when the inode is fully set up after insertion into the cache. Newly allocated inodes are inserted locked and so aren't usable until the allocation transaction commits. This, however, occurs before the dentry and security information is fully initialised and hence the inode is unlocked and available for lookups to find too early. To solve the problem, only clear the XFS_INEW flag for newly created inodes once the dentry is fully instantiated. This means lookups will retry until the XFS_INEW flag is removed from the inode and hence avoids the race conditions in questions. THis also means that xfs_create(), xfs_create_tmpfile() and xfs_symlink() need to finish the setup of the inode in their error paths if we had allocated the inode but failed later in the creation process. xfs_symlink(), in particular, needed a lot of help to make it's error handling match that of xfs_create(). Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-23 11:38:08 +00:00
goto out_bmap_cancel;
}
bp->b_ops = &xfs_symlink_buf_ops;
byte_cnt = XFS_SYMLINK_BUF_SPACE(mp, byte_cnt);
byte_cnt = min(byte_cnt, pathlen);
buf = bp->b_addr;
buf += xfs_symlink_hdr_set(mp, ip->i_ino, offset,
byte_cnt, bp);
memcpy(buf, cur_chunk, byte_cnt);
cur_chunk += byte_cnt;
pathlen -= byte_cnt;
offset += byte_cnt;
xfs_trans_buf_set_type(tp, bp, XFS_BLFT_SYMLINK_BUF);
xfs_trans_log_buf(tp, bp, 0, (buf + byte_cnt - 1) -
(char *)bp->b_addr);
}
ASSERT(pathlen == 0);
}
/*
* Create the directory entry for the symlink.
*/
error = xfs_dir_createname(tp, dp, link_name, ip->i_ino, resblks);
if (error)
xfs: inodes are new until the dentry cache is set up Al Viro noticed a generic set of issues to do with filehandle lookup racing with dentry cache setup. They involve a filehandle lookup occurring while an inode is being created and the filehandle lookup racing with the dentry creation for the real file. This can lead to multiple dentries for the one path being instantiated. There are a host of other issues around this same set of paths. The underlying cause is that file handle lookup only waits on inode cache instantiation rather than full dentry cache instantiation. XFS is mostly immune to the problems discovered due to it's own internal inode cache, but there are a couple of corner cases where races can happen. We currently clear the XFS_INEW flag when the inode is fully set up after insertion into the cache. Newly allocated inodes are inserted locked and so aren't usable until the allocation transaction commits. This, however, occurs before the dentry and security information is fully initialised and hence the inode is unlocked and available for lookups to find too early. To solve the problem, only clear the XFS_INEW flag for newly created inodes once the dentry is fully instantiated. This means lookups will retry until the XFS_INEW flag is removed from the inode and hence avoids the race conditions in questions. THis also means that xfs_create(), xfs_create_tmpfile() and xfs_symlink() need to finish the setup of the inode in their error paths if we had allocated the inode but failed later in the creation process. xfs_symlink(), in particular, needed a lot of help to make it's error handling match that of xfs_create(). Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-23 11:38:08 +00:00
goto out_bmap_cancel;
xfs_trans_ichgtime(tp, dp, XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG);
xfs_trans_log_inode(tp, dp, XFS_ILOG_CORE);
/*
* If this is a synchronous mount, make sure that the
* symlink transaction goes to disk before returning to
* the user.
*/
if (mp->m_flags & (XFS_MOUNT_WSYNC|XFS_MOUNT_DIRSYNC)) {
xfs_trans_set_sync(tp);
}
error = xfs_defer_finish(&tp, tp->t_dfops);
xfs: inodes are new until the dentry cache is set up Al Viro noticed a generic set of issues to do with filehandle lookup racing with dentry cache setup. They involve a filehandle lookup occurring while an inode is being created and the filehandle lookup racing with the dentry creation for the real file. This can lead to multiple dentries for the one path being instantiated. There are a host of other issues around this same set of paths. The underlying cause is that file handle lookup only waits on inode cache instantiation rather than full dentry cache instantiation. XFS is mostly immune to the problems discovered due to it's own internal inode cache, but there are a couple of corner cases where races can happen. We currently clear the XFS_INEW flag when the inode is fully set up after insertion into the cache. Newly allocated inodes are inserted locked and so aren't usable until the allocation transaction commits. This, however, occurs before the dentry and security information is fully initialised and hence the inode is unlocked and available for lookups to find too early. To solve the problem, only clear the XFS_INEW flag for newly created inodes once the dentry is fully instantiated. This means lookups will retry until the XFS_INEW flag is removed from the inode and hence avoids the race conditions in questions. THis also means that xfs_create(), xfs_create_tmpfile() and xfs_symlink() need to finish the setup of the inode in their error paths if we had allocated the inode but failed later in the creation process. xfs_symlink(), in particular, needed a lot of help to make it's error handling match that of xfs_create(). Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-23 11:38:08 +00:00
if (error)
goto out_bmap_cancel;
error = xfs_trans_commit(tp);
xfs: inodes are new until the dentry cache is set up Al Viro noticed a generic set of issues to do with filehandle lookup racing with dentry cache setup. They involve a filehandle lookup occurring while an inode is being created and the filehandle lookup racing with the dentry creation for the real file. This can lead to multiple dentries for the one path being instantiated. There are a host of other issues around this same set of paths. The underlying cause is that file handle lookup only waits on inode cache instantiation rather than full dentry cache instantiation. XFS is mostly immune to the problems discovered due to it's own internal inode cache, but there are a couple of corner cases where races can happen. We currently clear the XFS_INEW flag when the inode is fully set up after insertion into the cache. Newly allocated inodes are inserted locked and so aren't usable until the allocation transaction commits. This, however, occurs before the dentry and security information is fully initialised and hence the inode is unlocked and available for lookups to find too early. To solve the problem, only clear the XFS_INEW flag for newly created inodes once the dentry is fully instantiated. This means lookups will retry until the XFS_INEW flag is removed from the inode and hence avoids the race conditions in questions. THis also means that xfs_create(), xfs_create_tmpfile() and xfs_symlink() need to finish the setup of the inode in their error paths if we had allocated the inode but failed later in the creation process. xfs_symlink(), in particular, needed a lot of help to make it's error handling match that of xfs_create(). Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-23 11:38:08 +00:00
if (error)
goto out_release_inode;
xfs_qm_dqrele(udqp);
xfs_qm_dqrele(gdqp);
xfs_qm_dqrele(pdqp);
*ipp = ip;
return 0;
xfs: inodes are new until the dentry cache is set up Al Viro noticed a generic set of issues to do with filehandle lookup racing with dentry cache setup. They involve a filehandle lookup occurring while an inode is being created and the filehandle lookup racing with the dentry creation for the real file. This can lead to multiple dentries for the one path being instantiated. There are a host of other issues around this same set of paths. The underlying cause is that file handle lookup only waits on inode cache instantiation rather than full dentry cache instantiation. XFS is mostly immune to the problems discovered due to it's own internal inode cache, but there are a couple of corner cases where races can happen. We currently clear the XFS_INEW flag when the inode is fully set up after insertion into the cache. Newly allocated inodes are inserted locked and so aren't usable until the allocation transaction commits. This, however, occurs before the dentry and security information is fully initialised and hence the inode is unlocked and available for lookups to find too early. To solve the problem, only clear the XFS_INEW flag for newly created inodes once the dentry is fully instantiated. This means lookups will retry until the XFS_INEW flag is removed from the inode and hence avoids the race conditions in questions. THis also means that xfs_create(), xfs_create_tmpfile() and xfs_symlink() need to finish the setup of the inode in their error paths if we had allocated the inode but failed later in the creation process. xfs_symlink(), in particular, needed a lot of help to make it's error handling match that of xfs_create(). Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-23 11:38:08 +00:00
out_bmap_cancel:
xfs_defer_cancel(tp->t_dfops);
xfs: inodes are new until the dentry cache is set up Al Viro noticed a generic set of issues to do with filehandle lookup racing with dentry cache setup. They involve a filehandle lookup occurring while an inode is being created and the filehandle lookup racing with the dentry creation for the real file. This can lead to multiple dentries for the one path being instantiated. There are a host of other issues around this same set of paths. The underlying cause is that file handle lookup only waits on inode cache instantiation rather than full dentry cache instantiation. XFS is mostly immune to the problems discovered due to it's own internal inode cache, but there are a couple of corner cases where races can happen. We currently clear the XFS_INEW flag when the inode is fully set up after insertion into the cache. Newly allocated inodes are inserted locked and so aren't usable until the allocation transaction commits. This, however, occurs before the dentry and security information is fully initialised and hence the inode is unlocked and available for lookups to find too early. To solve the problem, only clear the XFS_INEW flag for newly created inodes once the dentry is fully instantiated. This means lookups will retry until the XFS_INEW flag is removed from the inode and hence avoids the race conditions in questions. THis also means that xfs_create(), xfs_create_tmpfile() and xfs_symlink() need to finish the setup of the inode in their error paths if we had allocated the inode but failed later in the creation process. xfs_symlink(), in particular, needed a lot of help to make it's error handling match that of xfs_create(). Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-23 11:38:08 +00:00
out_trans_cancel:
xfs_trans_cancel(tp);
xfs: inodes are new until the dentry cache is set up Al Viro noticed a generic set of issues to do with filehandle lookup racing with dentry cache setup. They involve a filehandle lookup occurring while an inode is being created and the filehandle lookup racing with the dentry creation for the real file. This can lead to multiple dentries for the one path being instantiated. There are a host of other issues around this same set of paths. The underlying cause is that file handle lookup only waits on inode cache instantiation rather than full dentry cache instantiation. XFS is mostly immune to the problems discovered due to it's own internal inode cache, but there are a couple of corner cases where races can happen. We currently clear the XFS_INEW flag when the inode is fully set up after insertion into the cache. Newly allocated inodes are inserted locked and so aren't usable until the allocation transaction commits. This, however, occurs before the dentry and security information is fully initialised and hence the inode is unlocked and available for lookups to find too early. To solve the problem, only clear the XFS_INEW flag for newly created inodes once the dentry is fully instantiated. This means lookups will retry until the XFS_INEW flag is removed from the inode and hence avoids the race conditions in questions. THis also means that xfs_create(), xfs_create_tmpfile() and xfs_symlink() need to finish the setup of the inode in their error paths if we had allocated the inode but failed later in the creation process. xfs_symlink(), in particular, needed a lot of help to make it's error handling match that of xfs_create(). Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-23 11:38:08 +00:00
out_release_inode:
/*
* Wait until after the current transaction is aborted to finish the
* setup of the inode and release the inode. This prevents recursive
* transactions and deadlocks from xfs_inactive.
*/
if (ip) {
xfs_finish_inode_setup(ip);
IRELE(ip);
}
xfs_qm_dqrele(udqp);
xfs_qm_dqrele(gdqp);
xfs_qm_dqrele(pdqp);
if (unlock_dp_on_error)
xfs_iunlock(dp, XFS_ILOCK_EXCL);
return error;
}
/*
* Free a symlink that has blocks associated with it.
*/
STATIC int
xfs_inactive_symlink_rmt(
struct xfs_inode *ip)
{
xfs_buf_t *bp;
int done;
int error;
struct xfs_defer_ops dfops;
int i;
xfs_mount_t *mp;
xfs_bmbt_irec_t mval[XFS_SYMLINK_MAPS];
int nmaps;
int size;
xfs_trans_t *tp;
mp = ip->i_mount;
ASSERT(ip->i_df.if_flags & XFS_IFEXTENTS);
/*
* We're freeing a symlink that has some
* blocks allocated to it. Free the
* blocks here. We know that we've got
* either 1 or 2 extents and that we can
* free them all in one bunmapi call.
*/
ASSERT(ip->i_d.di_nextents > 0 && ip->i_d.di_nextents <= 2);
error = xfs_trans_alloc(mp, &M_RES(mp)->tr_itruncate, 0, 0, 0, &tp);
if (error)
return error;
xfs_ilock(ip, XFS_ILOCK_EXCL);
xfs_trans_ijoin(tp, ip, 0);
/*
* Lock the inode, fix the size, and join it to the transaction.
* Hold it so in the normal path, we still have it locked for
* the second transaction. In the error paths we need it
* held so the cancel won't rele it, see below.
*/
size = (int)ip->i_d.di_size;
ip->i_d.di_size = 0;
xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
/*
* Find the block(s) so we can inval and unmap them.
*/
done = 0;
xfs_defer_init(tp, &dfops, &tp->t_firstblock);
nmaps = ARRAY_SIZE(mval);
error = xfs_bmapi_read(ip, 0, xfs_symlink_blocks(mp, size),
mval, &nmaps, 0);
if (error)
goto error_trans_cancel;
/*
* Invalidate the block(s). No validation is done.
*/
for (i = 0; i < nmaps; i++) {
bp = xfs_trans_get_buf(tp, mp->m_ddev_targp,
XFS_FSB_TO_DADDR(mp, mval[i].br_startblock),
XFS_FSB_TO_BB(mp, mval[i].br_blockcount), 0);
if (!bp) {
error = -ENOMEM;
goto error_bmap_cancel;
}
xfs_trans_binval(tp, bp);
}
/*
* Unmap the dead block(s) to the dfops.
*/
error = xfs_bunmapi(tp, ip, 0, size, 0, nmaps, &tp->t_firstblock,
&done);
if (error)
goto error_bmap_cancel;
ASSERT(done);
/*
* Commit the first transaction. This logs the EFI and the inode.
*/
xfs_defer_ijoin(tp->t_dfops, ip);
error = xfs_defer_finish(&tp, tp->t_dfops);
if (error)
goto error_bmap_cancel;
/*
* Commit the transaction containing extent freeing and EFDs.
*/
xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
error = xfs_trans_commit(tp);
if (error) {
ASSERT(XFS_FORCED_SHUTDOWN(mp));
goto error_unlock;
}
/*
* Remove the memory for extent descriptions (just bookkeeping).
*/
if (ip->i_df.if_bytes)
xfs_idata_realloc(ip, -ip->i_df.if_bytes, XFS_DATA_FORK);
ASSERT(ip->i_df.if_bytes == 0);
xfs_iunlock(ip, XFS_ILOCK_EXCL);
return 0;
error_bmap_cancel:
xfs_defer_cancel(tp->t_dfops);
error_trans_cancel:
xfs_trans_cancel(tp);
error_unlock:
xfs_iunlock(ip, XFS_ILOCK_EXCL);
return error;
}
/*
* xfs_inactive_symlink - free a symlink
*/
int
xfs_inactive_symlink(
struct xfs_inode *ip)
{
struct xfs_mount *mp = ip->i_mount;
int pathlen;
trace_xfs_inactive_symlink(ip);
if (XFS_FORCED_SHUTDOWN(mp))
return -EIO;
xfs_ilock(ip, XFS_ILOCK_EXCL);
/*
* Zero length symlinks _can_ exist.
*/
pathlen = (int)ip->i_d.di_size;
if (!pathlen) {
xfs_iunlock(ip, XFS_ILOCK_EXCL);
return 0;
}
if (pathlen < 0 || pathlen > XFS_SYMLINK_MAXLEN) {
xfs_alert(mp, "%s: inode (0x%llx) bad symlink length (%d)",
__func__, (unsigned long long)ip->i_ino, pathlen);
xfs_iunlock(ip, XFS_ILOCK_EXCL);
ASSERT(0);
return -EFSCORRUPTED;
}
if (ip->i_df.if_flags & XFS_IFINLINE) {
if (ip->i_df.if_bytes > 0)
xfs_idata_realloc(ip, -(ip->i_df.if_bytes),
XFS_DATA_FORK);
xfs_iunlock(ip, XFS_ILOCK_EXCL);
ASSERT(ip->i_df.if_bytes == 0);
return 0;
}
xfs_iunlock(ip, XFS_ILOCK_EXCL);
/* remove the remote symlink */
return xfs_inactive_symlink_rmt(ip);
}