linux-stable/tools/perf/perf.h

26 lines
450 B
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _PERF_PERF_H
#define _PERF_PERF_H
#include <stdbool.h>
perf tools: Allow overriding MAX_NR_CPUS at compile time After update of kernel, the perf tool doesn't run anymore on my 32MB RAM powerpc board, but still runs on a 128MB RAM board: ~# strace perf execve("/usr/sbin/perf", ["perf"], [/* 12 vars */]) = -1 ENOMEM (Cannot allocate memory) --- SIGSEGV {si_signo=SIGSEGV, si_code=SI_KERNEL, si_addr=0} --- +++ killed by SIGSEGV +++ Segmentation fault objdump -x shows that .bss section has a huge size of 24Mbytes: 27 .bss 016baca8 101cebb8 101cebb8 001cd988 2**3 With especially the following objects having quite big size: 10205f80 l O .bss 00140000 runtime_cycles_stats 10345f80 l O .bss 00140000 runtime_stalled_cycles_front_stats 10485f80 l O .bss 00140000 runtime_stalled_cycles_back_stats 105c5f80 l O .bss 00140000 runtime_branches_stats 10705f80 l O .bss 00140000 runtime_cacherefs_stats 10845f80 l O .bss 00140000 runtime_l1_dcache_stats 10985f80 l O .bss 00140000 runtime_l1_icache_stats 10ac5f80 l O .bss 00140000 runtime_ll_cache_stats 10c05f80 l O .bss 00140000 runtime_itlb_cache_stats 10d45f80 l O .bss 00140000 runtime_dtlb_cache_stats 10e85f80 l O .bss 00140000 runtime_cycles_in_tx_stats 10fc5f80 l O .bss 00140000 runtime_transaction_stats 11105f80 l O .bss 00140000 runtime_elision_stats 11245f80 l O .bss 00140000 runtime_topdown_total_slots 11385f80 l O .bss 00140000 runtime_topdown_slots_retired 114c5f80 l O .bss 00140000 runtime_topdown_slots_issued 11605f80 l O .bss 00140000 runtime_topdown_fetch_bubbles 11745f80 l O .bss 00140000 runtime_topdown_recovery_bubbles This is due to commit 4d255766d28b1 ("perf: Bump max number of cpus to 1024"), because many tables are sized with MAX_NR_CPUS This patch gives the opportunity to redefine MAX_NR_CPUS via $ make EXTRA_CFLAGS=-DMAX_NR_CPUS=1 Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20170922112043.8349468C57@po15668-vm-win7.idsi0.si.c-s.fr Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-09-22 11:20:43 +00:00
#ifndef MAX_NR_CPUS
#define MAX_NR_CPUS 2048
perf tools: Allow overriding MAX_NR_CPUS at compile time After update of kernel, the perf tool doesn't run anymore on my 32MB RAM powerpc board, but still runs on a 128MB RAM board: ~# strace perf execve("/usr/sbin/perf", ["perf"], [/* 12 vars */]) = -1 ENOMEM (Cannot allocate memory) --- SIGSEGV {si_signo=SIGSEGV, si_code=SI_KERNEL, si_addr=0} --- +++ killed by SIGSEGV +++ Segmentation fault objdump -x shows that .bss section has a huge size of 24Mbytes: 27 .bss 016baca8 101cebb8 101cebb8 001cd988 2**3 With especially the following objects having quite big size: 10205f80 l O .bss 00140000 runtime_cycles_stats 10345f80 l O .bss 00140000 runtime_stalled_cycles_front_stats 10485f80 l O .bss 00140000 runtime_stalled_cycles_back_stats 105c5f80 l O .bss 00140000 runtime_branches_stats 10705f80 l O .bss 00140000 runtime_cacherefs_stats 10845f80 l O .bss 00140000 runtime_l1_dcache_stats 10985f80 l O .bss 00140000 runtime_l1_icache_stats 10ac5f80 l O .bss 00140000 runtime_ll_cache_stats 10c05f80 l O .bss 00140000 runtime_itlb_cache_stats 10d45f80 l O .bss 00140000 runtime_dtlb_cache_stats 10e85f80 l O .bss 00140000 runtime_cycles_in_tx_stats 10fc5f80 l O .bss 00140000 runtime_transaction_stats 11105f80 l O .bss 00140000 runtime_elision_stats 11245f80 l O .bss 00140000 runtime_topdown_total_slots 11385f80 l O .bss 00140000 runtime_topdown_slots_retired 114c5f80 l O .bss 00140000 runtime_topdown_slots_issued 11605f80 l O .bss 00140000 runtime_topdown_fetch_bubbles 11745f80 l O .bss 00140000 runtime_topdown_recovery_bubbles This is due to commit 4d255766d28b1 ("perf: Bump max number of cpus to 1024"), because many tables are sized with MAX_NR_CPUS This patch gives the opportunity to redefine MAX_NR_CPUS via $ make EXTRA_CFLAGS=-DMAX_NR_CPUS=1 Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20170922112043.8349468C57@po15668-vm-win7.idsi0.si.c-s.fr Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-09-22 11:20:43 +00:00
#endif
extern const char *input_name;
extern bool perf_host, perf_guest;
perf tools: Make perf.data more self-descriptive (v8) The goal of this patch is to include more information about the host environment into the perf.data so it is more self-descriptive. Overtime, profiles are captured on various machines and it becomes hard to track what was recorded, on what machine and when. This patch provides a way to solve this by extending the perf.data file with basic information about the host machine. To add those extensions, we leverage the feature bits capabilities of the perf.data format. The change is backward compatible with existing perf.data files. We define the following useful new extensions: - HEADER_HOSTNAME: the hostname - HEADER_OSRELEASE: the kernel release number - HEADER_ARCH: the hw architecture - HEADER_CPUDESC: generic CPU description - HEADER_NRCPUS: number of online/avail cpus - HEADER_CMDLINE: perf command line - HEADER_VERSION: perf version - HEADER_TOPOLOGY: cpu topology - HEADER_EVENT_DESC: full event description (attrs) - HEADER_CPUID: easy-to-parse low level CPU identication The small granularity for the entries is to make it easier to extend without breaking backward compatiblity. Many entries are provided as ASCII strings. Perf report/script have been modified to print the basic information as easy-to-parse ASCII strings. Extended information about CPU and NUMA topology may be requested with the -I option. Thanks to David Ahern for reviewing and testing the many versions of this patch. $ perf report --stdio # ======== # captured on : Mon Sep 26 15:22:14 2011 # hostname : quad # os release : 3.1.0-rc4-tip # perf version : 3.1.0-rc4 # arch : x86_64 # nrcpus online : 4 # nrcpus avail : 4 # cpudesc : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz # cpuid : GenuineIntel,6,15,11 # total memory : 8105360 kB # cmdline : /home/eranian/perfmon/official/tip/build/tools/perf/perf record date # event : name = cycles, type = 0, config = 0x0, config1 = 0x0, config2 = 0x0, excl_usr = 0, excl_kern = 0, id = { 29, 30, 31, # HEADER_CPU_TOPOLOGY info available, use -I to display # HEADER_NUMA_TOPOLOGY info available, use -I to display # ======== # ... $ perf report --stdio -I # ======== # captured on : Mon Sep 26 15:22:14 2011 # hostname : quad # os release : 3.1.0-rc4-tip # perf version : 3.1.0-rc4 # arch : x86_64 # nrcpus online : 4 # nrcpus avail : 4 # cpudesc : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz # cpuid : GenuineIntel,6,15,11 # total memory : 8105360 kB # cmdline : /home/eranian/perfmon/official/tip/build/tools/perf/perf record date # event : name = cycles, type = 0, config = 0x0, config1 = 0x0, config2 = 0x0, excl_usr = 0, excl_kern = 0, id = { 29, 30, 31, # sibling cores : 0-3 # sibling threads : 0 # sibling threads : 1 # sibling threads : 2 # sibling threads : 3 # node0 meminfo : total = 8320608 kB, free = 7571024 kB # node0 cpu list : 0-3 # ======== # ... Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <robert.richter@amd.com> Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/20110930134040.GA5575@quad Signed-off-by: Stephane Eranian <eranian@google.com> [ committer notes: Use --show-info in the tools as was in the docs, rename perf_header_fprintf_info to perf_file_section__fprintf_info, fixup conflict with f69b64f7 "perf: Support setting the disassembler style" ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-09-30 13:40:40 +00:00
extern const char perf_version_string[];
void pthread__unblock_sigwinch(void);
enum perf_affinity {
PERF_AFFINITY_SYS = 0,
PERF_AFFINITY_NODE,
PERF_AFFINITY_CPU,
PERF_AFFINITY_MAX
};
perf tools: Add 'perf -vv' as an alias to 'perf version --build-options' We keep having bug reports that when users build perf on their own, but they don't install some needed libraries such as libelf, libbfd/libibery. The perf can build, but it is missing important functionality. This patch provides a new option '-vv' for perf which will print the compiled-in status of libraries. The 'perf -vv' is mapped to 'perf version --build-options'. For example: $ ./perf -vv perf version 4.13.rc5.g6727c5 dwarf: [ on ] # HAVE_DWARF_SUPPORT dwarf_getlocations: [ on ] # HAVE_DWARF_GETLOCATIONS_SUPPORT glibc: [ on ] # HAVE_GLIBC_SUPPORT gtk2: [ on ] # HAVE_GTK2_SUPPORT libaudit: [ OFF ] # HAVE_LIBAUDIT_SUPPORT libbfd: [ on ] # HAVE_LIBBFD_SUPPORT libelf: [ on ] # HAVE_LIBELF_SUPPORT libnuma: [ on ] # HAVE_LIBNUMA_SUPPORT numa_num_possible_cpus: [ on ] # HAVE_LIBNUMA_SUPPORT libperl: [ on ] # HAVE_LIBPERL_SUPPORT libpython: [ on ] # HAVE_LIBPYTHON_SUPPORT libslang: [ on ] # HAVE_SLANG_SUPPORT libcrypto: [ on ] # HAVE_LIBCRYPTO_SUPPORT libunwind: [ on ] # HAVE_LIBUNWIND_SUPPORT libdw-dwarf-unwind: [ on ] # HAVE_DWARF_SUPPORT zlib: [ on ] # HAVE_ZLIB_SUPPORT lzma: [ on ] # HAVE_LZMA_SUPPORT get_cpuid: [ on ] # HAVE_AUXTRACE_SUPPORT bpf: [ on ] # HAVE_LIBBPF_SUPPORT v3: One bug is found in v2. It didn't process the option like '-vabc' correctly. Fix this bug. v2: Use a global variable version_verbose to record the number of 'v'. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1522402036-22915-6-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-30 09:27:15 +00:00
extern int version_verbose;
#endif