linux-stable/arch/x86/kernel/head64.c

129 lines
3.4 KiB
C
Raw Normal View History

/*
* prepare to run common code
*
* Copyright (C) 2000 Andrea Arcangeli <andrea@suse.de> SuSE
*/
#include <linux/init.h>
#include <linux/linkage.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/percpu.h>
#include <linux/start_kernel.h>
#include <linux/io.h>
x86: Use memblock to replace early_res 1. replace find_e820_area with memblock_find_in_range 2. replace reserve_early with memblock_x86_reserve_range 3. replace free_early with memblock_x86_free_range. 4. NO_BOOTMEM will switch to use memblock too. 5. use _e820, _early wrap in the patch, in following patch, will replace them all 6. because memblock_x86_free_range support partial free, we can remove some special care 7. Need to make sure that memblock_find_in_range() is called after memblock_x86_fill() so adjust some calling later in setup.c::setup_arch() -- corruption_check and mptable_update -v2: Move reserve_brk() early Before fill_memblock_area, to avoid overlap between brk and memblock_find_in_range() that could happen We have more then 128 RAM entry in E820 tables, and memblock_x86_fill() could use memblock_find_in_range() to find a new place for memblock.memory.region array. and We don't need to use extend_brk() after fill_memblock_area() So move reserve_brk() early before fill_memblock_area(). -v3: Move find_smp_config early To make sure memblock_find_in_range not find wrong place, if BIOS doesn't put mptable in right place. -v4: Treat RESERVED_KERN as RAM in memblock.memory. and they are already in memblock.reserved already.. use __NOT_KEEP_MEMBLOCK to make sure memblock related code could be freed later. -v5: Generic version __memblock_find_in_range() is going from high to low, and for 32bit active_region for 32bit does include high pages need to replace the limit with memblock.default_alloc_limit, aka get_max_mapped() -v6: Use current_limit instead -v7: check with MEMBLOCK_ERROR instead of -1ULL or -1L -v8: Set memblock_can_resize early to handle EFI with more RAM entries -v9: update after kmemleak changes in mainline Suggested-by: David S. Miller <davem@davemloft.net> Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-08-25 20:39:17 +00:00
#include <linux/memblock.h>
#include <asm/processor.h>
#include <asm/proto.h>
#include <asm/smp.h>
#include <asm/setup.h>
#include <asm/desc.h>
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
#include <asm/sections.h>
#include <asm/kdebug.h>
#include <asm/e820.h>
#include <asm/trampoline.h>
#include <asm/bios_ebda.h>
static void __init zap_identity_mappings(void)
{
pgd_t *pgd = pgd_offset_k(0UL);
pgd_clear(pgd);
__flush_tlb_all();
}
/* Don't add a printk in there. printk relies on the PDA which is not initialized
yet. */
static void __init clear_bss(void)
{
memset(__bss_start, 0,
(unsigned long) __bss_stop - (unsigned long) __bss_start);
}
static void __init copy_bootdata(char *real_mode_data)
{
char * command_line;
memcpy(&boot_params, real_mode_data, sizeof boot_params);
if (boot_params.hdr.cmd_line_ptr) {
command_line = __va(boot_params.hdr.cmd_line_ptr);
memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
}
}
void __init x86_64_start_kernel(char * real_mode_data)
{
int i;
/*
* Build-time sanity checks on the kernel image and module
* area mappings. (these are purely build-time and produce no code)
*/
BUILD_BUG_ON(MODULES_VADDR < KERNEL_IMAGE_START);
BUILD_BUG_ON(MODULES_VADDR-KERNEL_IMAGE_START < KERNEL_IMAGE_SIZE);
BUILD_BUG_ON(MODULES_LEN + KERNEL_IMAGE_SIZE > 2*PUD_SIZE);
BUILD_BUG_ON((KERNEL_IMAGE_START & ~PMD_MASK) != 0);
BUILD_BUG_ON((MODULES_VADDR & ~PMD_MASK) != 0);
BUILD_BUG_ON(!(MODULES_VADDR > __START_KERNEL));
BUILD_BUG_ON(!(((MODULES_END - 1) & PGDIR_MASK) ==
(__START_KERNEL & PGDIR_MASK)));
BUILD_BUG_ON(__fix_to_virt(__end_of_fixed_addresses) <= MODULES_END);
/* clear bss before set_intr_gate with early_idt_handler */
clear_bss();
/* Make NULL pointers segfault */
zap_identity_mappings();
/* Cleanup the over mapped high alias */
cleanup_highmap();
max_pfn_mapped = KERNEL_IMAGE_SIZE >> PAGE_SHIFT;
for (i = 0; i < NUM_EXCEPTION_VECTORS; i++) {
#ifdef CONFIG_EARLY_PRINTK
set_intr_gate(i, &early_idt_handlers[i]);
#else
set_intr_gate(i, early_idt_handler);
#endif
}
load_idt((const struct desc_ptr *)&idt_descr);
if (console_loglevel == 10)
early_printk("Kernel alive\n");
x86_64_start_reservations(real_mode_data);
}
void __init x86_64_start_reservations(char *real_mode_data)
{
copy_bootdata(__va(real_mode_data));
x86: Use memblock to replace early_res 1. replace find_e820_area with memblock_find_in_range 2. replace reserve_early with memblock_x86_reserve_range 3. replace free_early with memblock_x86_free_range. 4. NO_BOOTMEM will switch to use memblock too. 5. use _e820, _early wrap in the patch, in following patch, will replace them all 6. because memblock_x86_free_range support partial free, we can remove some special care 7. Need to make sure that memblock_find_in_range() is called after memblock_x86_fill() so adjust some calling later in setup.c::setup_arch() -- corruption_check and mptable_update -v2: Move reserve_brk() early Before fill_memblock_area, to avoid overlap between brk and memblock_find_in_range() that could happen We have more then 128 RAM entry in E820 tables, and memblock_x86_fill() could use memblock_find_in_range() to find a new place for memblock.memory.region array. and We don't need to use extend_brk() after fill_memblock_area() So move reserve_brk() early before fill_memblock_area(). -v3: Move find_smp_config early To make sure memblock_find_in_range not find wrong place, if BIOS doesn't put mptable in right place. -v4: Treat RESERVED_KERN as RAM in memblock.memory. and they are already in memblock.reserved already.. use __NOT_KEEP_MEMBLOCK to make sure memblock related code could be freed later. -v5: Generic version __memblock_find_in_range() is going from high to low, and for 32bit active_region for 32bit does include high pages need to replace the limit with memblock.default_alloc_limit, aka get_max_mapped() -v6: Use current_limit instead -v7: check with MEMBLOCK_ERROR instead of -1ULL or -1L -v8: Set memblock_can_resize early to handle EFI with more RAM entries -v9: update after kmemleak changes in mainline Suggested-by: David S. Miller <davem@davemloft.net> Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-08-25 20:39:17 +00:00
memblock_init();
memblock_x86_reserve_range(__pa_symbol(&_text), __pa_symbol(&__bss_stop), "TEXT DATA BSS");
#ifdef CONFIG_BLK_DEV_INITRD
/* Reserve INITRD */
if (boot_params.hdr.type_of_loader && boot_params.hdr.ramdisk_image) {
x86: Make sure free_init_pages() frees pages on page boundary When CONFIG_NO_BOOTMEM=y, it could use memory more effiently, or in a more compact fashion. Example: Allocated new RAMDISK: 00ec2000 - 0248ce57 Move RAMDISK from 000000002ea04000 - 000000002ffcee56 to 00ec2000 - 0248ce56 The new RAMDISK's end is not page aligned. Last page could be shared with other users. When free_init_pages are called for initrd or .init, the page could be freed and we could corrupt other data. code segment in free_init_pages(): | for (; addr < end; addr += PAGE_SIZE) { | ClearPageReserved(virt_to_page(addr)); | init_page_count(virt_to_page(addr)); | memset((void *)(addr & ~(PAGE_SIZE-1)), | POISON_FREE_INITMEM, PAGE_SIZE); | free_page(addr); | totalram_pages++; | } last half page could be used as one whole free page. So page align the boundaries. -v2: make the original initramdisk to be aligned, according to Johannes, otherwise we have the chance to lose one page. we still need to keep initrd_end not aligned, otherwise it could confuse decompressor. -v3: change to WARN_ON instead, suggested by Johannes. -v4: use PAGE_ALIGN, suggested by Johannes. We may fix that macro name later to PAGE_ALIGN_UP, and PAGE_ALIGN_DOWN Add comments about assuming ramdisk start is aligned in relocate_initrd(), change to re get ramdisk_image instead of save it to make diff smaller. Add warning for wrong range, suggested by Johannes. -v6: remove one WARN() We need to align beginning in free_init_pages() do not copy more than ramdisk_size, noticed by Johannes Reported-by: Stanislaw Gruszka <sgruszka@redhat.com> Tested-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: David Miller <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <1269830604-26214-3-git-send-email-yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-29 02:42:55 +00:00
/* Assume only end is not page aligned */
unsigned long ramdisk_image = boot_params.hdr.ramdisk_image;
unsigned long ramdisk_size = boot_params.hdr.ramdisk_size;
x86: Make sure free_init_pages() frees pages on page boundary When CONFIG_NO_BOOTMEM=y, it could use memory more effiently, or in a more compact fashion. Example: Allocated new RAMDISK: 00ec2000 - 0248ce57 Move RAMDISK from 000000002ea04000 - 000000002ffcee56 to 00ec2000 - 0248ce56 The new RAMDISK's end is not page aligned. Last page could be shared with other users. When free_init_pages are called for initrd or .init, the page could be freed and we could corrupt other data. code segment in free_init_pages(): | for (; addr < end; addr += PAGE_SIZE) { | ClearPageReserved(virt_to_page(addr)); | init_page_count(virt_to_page(addr)); | memset((void *)(addr & ~(PAGE_SIZE-1)), | POISON_FREE_INITMEM, PAGE_SIZE); | free_page(addr); | totalram_pages++; | } last half page could be used as one whole free page. So page align the boundaries. -v2: make the original initramdisk to be aligned, according to Johannes, otherwise we have the chance to lose one page. we still need to keep initrd_end not aligned, otherwise it could confuse decompressor. -v3: change to WARN_ON instead, suggested by Johannes. -v4: use PAGE_ALIGN, suggested by Johannes. We may fix that macro name later to PAGE_ALIGN_UP, and PAGE_ALIGN_DOWN Add comments about assuming ramdisk start is aligned in relocate_initrd(), change to re get ramdisk_image instead of save it to make diff smaller. Add warning for wrong range, suggested by Johannes. -v6: remove one WARN() We need to align beginning in free_init_pages() do not copy more than ramdisk_size, noticed by Johannes Reported-by: Stanislaw Gruszka <sgruszka@redhat.com> Tested-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: David Miller <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <1269830604-26214-3-git-send-email-yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-29 02:42:55 +00:00
unsigned long ramdisk_end = PAGE_ALIGN(ramdisk_image + ramdisk_size);
memblock_x86_reserve_range(ramdisk_image, ramdisk_end, "RAMDISK");
}
#endif
reserve_ebda_region();
/*
* At this point everything still needed from the boot loader
* or BIOS or kernel text should be early reserved or marked not
* RAM in e820. All other memory is free game.
*/
start_kernel();
}