linux-stable/net/mac80211/cfg.c

5170 lines
139 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* mac80211 configuration hooks for cfg80211
*
* Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net>
* Copyright 2013-2015 Intel Mobile Communications GmbH
* Copyright (C) 2015-2017 Intel Deutschland GmbH
* Copyright (C) 2018-2024 Intel Corporation
*/
#include <linux/ieee80211.h>
#include <linux/nl80211.h>
#include <linux/rtnetlink.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 18:56:21 +00:00
#include <net/net_namespace.h>
#include <linux/rcupdate.h>
#include <linux/fips.h>
#include <linux/if_ether.h>
#include <net/cfg80211.h>
#include "ieee80211_i.h"
#include "driver-ops.h"
#include "rate.h"
#include "mesh.h"
#include "wme.h"
static struct ieee80211_link_data *
ieee80211_link_or_deflink(struct ieee80211_sub_if_data *sdata, int link_id,
bool require_valid)
{
struct ieee80211_link_data *link;
if (link_id < 0) {
/*
* For keys, if sdata is not an MLD, we might not use
* the return value at all (if it's not a pairwise key),
* so in that case (require_valid==false) don't error.
*/
if (require_valid && ieee80211_vif_is_mld(&sdata->vif))
return ERR_PTR(-EINVAL);
return &sdata->deflink;
}
link = sdata_dereference(sdata->link[link_id], sdata);
if (!link)
return ERR_PTR(-ENOLINK);
return link;
}
static void ieee80211_set_mu_mimo_follow(struct ieee80211_sub_if_data *sdata,
struct vif_params *params)
{
bool mu_mimo_groups = false;
bool mu_mimo_follow = false;
if (params->vht_mumimo_groups) {
u64 membership;
BUILD_BUG_ON(sizeof(membership) != WLAN_MEMBERSHIP_LEN);
memcpy(sdata->vif.bss_conf.mu_group.membership,
params->vht_mumimo_groups, WLAN_MEMBERSHIP_LEN);
memcpy(sdata->vif.bss_conf.mu_group.position,
params->vht_mumimo_groups + WLAN_MEMBERSHIP_LEN,
WLAN_USER_POSITION_LEN);
ieee80211_link_info_change_notify(sdata, &sdata->deflink,
BSS_CHANGED_MU_GROUPS);
/* don't care about endianness - just check for 0 */
memcpy(&membership, params->vht_mumimo_groups,
WLAN_MEMBERSHIP_LEN);
mu_mimo_groups = membership != 0;
}
if (params->vht_mumimo_follow_addr) {
mu_mimo_follow =
is_valid_ether_addr(params->vht_mumimo_follow_addr);
ether_addr_copy(sdata->u.mntr.mu_follow_addr,
params->vht_mumimo_follow_addr);
}
sdata->vif.bss_conf.mu_mimo_owner = mu_mimo_groups || mu_mimo_follow;
}
static int ieee80211_set_mon_options(struct ieee80211_sub_if_data *sdata,
struct vif_params *params)
{
struct ieee80211_local *local = sdata->local;
struct ieee80211_sub_if_data *monitor_sdata;
/* check flags first */
if (params->flags && ieee80211_sdata_running(sdata)) {
u32 mask = MONITOR_FLAG_COOK_FRAMES | MONITOR_FLAG_ACTIVE;
/*
* Prohibit MONITOR_FLAG_COOK_FRAMES and
* MONITOR_FLAG_ACTIVE to be changed while the
* interface is up.
* Else we would need to add a lot of cruft
* to update everything:
* cooked_mntrs, monitor and all fif_* counters
* reconfigure hardware
*/
if ((params->flags & mask) != (sdata->u.mntr.flags & mask))
return -EBUSY;
}
/* also validate MU-MIMO change */
monitor_sdata = wiphy_dereference(local->hw.wiphy,
local->monitor_sdata);
if (!monitor_sdata &&
(params->vht_mumimo_groups || params->vht_mumimo_follow_addr))
return -EOPNOTSUPP;
/* apply all changes now - no failures allowed */
if (monitor_sdata)
ieee80211_set_mu_mimo_follow(monitor_sdata, params);
if (params->flags) {
if (ieee80211_sdata_running(sdata)) {
ieee80211_adjust_monitor_flags(sdata, -1);
sdata->u.mntr.flags = params->flags;
ieee80211_adjust_monitor_flags(sdata, 1);
ieee80211_configure_filter(local);
} else {
/*
* Because the interface is down, ieee80211_do_stop
* and ieee80211_do_open take care of "everything"
* mentioned in the comment above.
*/
sdata->u.mntr.flags = params->flags;
}
}
return 0;
}
static int ieee80211_set_ap_mbssid_options(struct ieee80211_sub_if_data *sdata,
struct cfg80211_mbssid_config params,
struct ieee80211_bss_conf *link_conf)
{
struct ieee80211_sub_if_data *tx_sdata;
sdata->vif.mbssid_tx_vif = NULL;
link_conf->bssid_index = 0;
link_conf->nontransmitted = false;
link_conf->ema_ap = false;
link_conf->bssid_indicator = 0;
if (sdata->vif.type != NL80211_IFTYPE_AP || !params.tx_wdev)
return -EINVAL;
tx_sdata = IEEE80211_WDEV_TO_SUB_IF(params.tx_wdev);
if (!tx_sdata)
return -EINVAL;
if (tx_sdata == sdata) {
sdata->vif.mbssid_tx_vif = &sdata->vif;
} else {
sdata->vif.mbssid_tx_vif = &tx_sdata->vif;
link_conf->nontransmitted = true;
link_conf->bssid_index = params.index;
}
if (params.ema)
link_conf->ema_ap = true;
return 0;
}
static struct wireless_dev *ieee80211_add_iface(struct wiphy *wiphy,
const char *name,
unsigned char name_assign_type,
enum nl80211_iftype type,
struct vif_params *params)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
struct wireless_dev *wdev;
struct ieee80211_sub_if_data *sdata;
int err;
err = ieee80211_if_add(local, name, name_assign_type, &wdev, type, params);
if (err)
return ERR_PTR(err);
sdata = IEEE80211_WDEV_TO_SUB_IF(wdev);
if (type == NL80211_IFTYPE_MONITOR) {
err = ieee80211_set_mon_options(sdata, params);
if (err) {
ieee80211_if_remove(sdata);
return NULL;
}
}
return wdev;
}
static int ieee80211_del_iface(struct wiphy *wiphy, struct wireless_dev *wdev)
{
ieee80211_if_remove(IEEE80211_WDEV_TO_SUB_IF(wdev));
return 0;
}
static int ieee80211_change_iface(struct wiphy *wiphy,
struct net_device *dev,
enum nl80211_iftype type,
struct vif_params *params)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = sdata->local;
struct sta_info *sta;
int ret;
lockdep_assert_wiphy(local->hw.wiphy);
ret = ieee80211_if_change_type(sdata, type);
if (ret)
return ret;
if (type == NL80211_IFTYPE_AP_VLAN && params->use_4addr == 0) {
RCU_INIT_POINTER(sdata->u.vlan.sta, NULL);
mac80211: add fast-rx path The regular RX path has a lot of code, but with a few assumptions on the hardware it's possible to reduce the amount of code significantly. Currently the assumptions on the driver are the following: * hardware/driver reordering buffer (if supporting aggregation) * hardware/driver decryption & PN checking (if using encryption) * hardware/driver did de-duplication * hardware/driver did A-MSDU deaggregation * AP_LINK_PS is used (in AP mode) * no client powersave handling in mac80211 (in client mode) of which some are actually checked per packet: * de-duplication * PN checking * decryption and additionally packets must * not be A-MSDU (have been deaggregated by driver/device) * be data packets * not be fragmented * be unicast * have RFC 1042 header Additionally dynamically we assume: * no encryption or CCMP/GCMP, TKIP/WEP/other not allowed * station must be authorized * 4-addr format not enabled Some data needed for the RX path is cached in a new per-station "fast_rx" structure, so that we only need to look at this and the packet, no other memory when processing packets on the fast RX path. After doing the above per-packet checks, the data path collapses down to a pretty simple conversion function taking advantage of the data cached in the small fast_rx struct. This should speed up the RX processing, and will make it easier to reason about parallelizing RX (for which statistics will need to be per-CPU still.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-03-31 17:02:10 +00:00
ieee80211_check_fast_rx_iface(sdata);
} else if (type == NL80211_IFTYPE_STATION && params->use_4addr >= 0) {
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
if (params->use_4addr == ifmgd->use_4addr)
return 0;
/* FIXME: no support for 4-addr MLO yet */
if (ieee80211_vif_is_mld(&sdata->vif))
return -EOPNOTSUPP;
sdata->u.mgd.use_4addr = params->use_4addr;
if (!ifmgd->associated)
return 0;
sta = sta_info_get(sdata, sdata->deflink.u.mgd.bssid);
if (sta)
drv_sta_set_4addr(local, sdata, &sta->sta,
params->use_4addr);
if (params->use_4addr)
ieee80211_send_4addr_nullfunc(local, sdata);
mac80211: add fast-rx path The regular RX path has a lot of code, but with a few assumptions on the hardware it's possible to reduce the amount of code significantly. Currently the assumptions on the driver are the following: * hardware/driver reordering buffer (if supporting aggregation) * hardware/driver decryption & PN checking (if using encryption) * hardware/driver did de-duplication * hardware/driver did A-MSDU deaggregation * AP_LINK_PS is used (in AP mode) * no client powersave handling in mac80211 (in client mode) of which some are actually checked per packet: * de-duplication * PN checking * decryption and additionally packets must * not be A-MSDU (have been deaggregated by driver/device) * be data packets * not be fragmented * be unicast * have RFC 1042 header Additionally dynamically we assume: * no encryption or CCMP/GCMP, TKIP/WEP/other not allowed * station must be authorized * 4-addr format not enabled Some data needed for the RX path is cached in a new per-station "fast_rx" structure, so that we only need to look at this and the packet, no other memory when processing packets on the fast RX path. After doing the above per-packet checks, the data path collapses down to a pretty simple conversion function taking advantage of the data cached in the small fast_rx struct. This should speed up the RX processing, and will make it easier to reason about parallelizing RX (for which statistics will need to be per-CPU still.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-03-31 17:02:10 +00:00
}
if (sdata->vif.type == NL80211_IFTYPE_MONITOR) {
ret = ieee80211_set_mon_options(sdata, params);
if (ret)
return ret;
}
return 0;
}
static int ieee80211_start_p2p_device(struct wiphy *wiphy,
struct wireless_dev *wdev)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev);
int ret;
lockdep_assert_wiphy(sdata->local->hw.wiphy);
ret = ieee80211_check_combinations(sdata, NULL, 0, 0);
if (ret < 0)
return ret;
return ieee80211_do_open(wdev, true);
}
static void ieee80211_stop_p2p_device(struct wiphy *wiphy,
struct wireless_dev *wdev)
{
ieee80211_sdata_stop(IEEE80211_WDEV_TO_SUB_IF(wdev));
}
static int ieee80211_start_nan(struct wiphy *wiphy,
struct wireless_dev *wdev,
struct cfg80211_nan_conf *conf)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev);
int ret;
lockdep_assert_wiphy(sdata->local->hw.wiphy);
ret = ieee80211_check_combinations(sdata, NULL, 0, 0);
if (ret < 0)
return ret;
ret = ieee80211_do_open(wdev, true);
if (ret)
return ret;
ret = drv_start_nan(sdata->local, sdata, conf);
if (ret)
ieee80211_sdata_stop(sdata);
sdata->u.nan.conf = *conf;
return ret;
}
static void ieee80211_stop_nan(struct wiphy *wiphy,
struct wireless_dev *wdev)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev);
drv_stop_nan(sdata->local, sdata);
ieee80211_sdata_stop(sdata);
}
static int ieee80211_nan_change_conf(struct wiphy *wiphy,
struct wireless_dev *wdev,
struct cfg80211_nan_conf *conf,
u32 changes)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev);
struct cfg80211_nan_conf new_conf;
int ret = 0;
if (sdata->vif.type != NL80211_IFTYPE_NAN)
return -EOPNOTSUPP;
if (!ieee80211_sdata_running(sdata))
return -ENETDOWN;
new_conf = sdata->u.nan.conf;
if (changes & CFG80211_NAN_CONF_CHANGED_PREF)
new_conf.master_pref = conf->master_pref;
if (changes & CFG80211_NAN_CONF_CHANGED_BANDS)
new_conf.bands = conf->bands;
ret = drv_nan_change_conf(sdata->local, sdata, &new_conf, changes);
if (!ret)
sdata->u.nan.conf = new_conf;
return ret;
}
static int ieee80211_add_nan_func(struct wiphy *wiphy,
struct wireless_dev *wdev,
struct cfg80211_nan_func *nan_func)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev);
int ret;
if (sdata->vif.type != NL80211_IFTYPE_NAN)
return -EOPNOTSUPP;
if (!ieee80211_sdata_running(sdata))
return -ENETDOWN;
spin_lock_bh(&sdata->u.nan.func_lock);
ret = idr_alloc(&sdata->u.nan.function_inst_ids,
nan_func, 1, sdata->local->hw.max_nan_de_entries + 1,
GFP_ATOMIC);
spin_unlock_bh(&sdata->u.nan.func_lock);
if (ret < 0)
return ret;
nan_func->instance_id = ret;
WARN_ON(nan_func->instance_id == 0);
ret = drv_add_nan_func(sdata->local, sdata, nan_func);
if (ret) {
spin_lock_bh(&sdata->u.nan.func_lock);
idr_remove(&sdata->u.nan.function_inst_ids,
nan_func->instance_id);
spin_unlock_bh(&sdata->u.nan.func_lock);
}
return ret;
}
static struct cfg80211_nan_func *
ieee80211_find_nan_func_by_cookie(struct ieee80211_sub_if_data *sdata,
u64 cookie)
{
struct cfg80211_nan_func *func;
int id;
lockdep_assert_held(&sdata->u.nan.func_lock);
idr_for_each_entry(&sdata->u.nan.function_inst_ids, func, id) {
if (func->cookie == cookie)
return func;
}
return NULL;
}
static void ieee80211_del_nan_func(struct wiphy *wiphy,
struct wireless_dev *wdev, u64 cookie)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev);
struct cfg80211_nan_func *func;
u8 instance_id = 0;
if (sdata->vif.type != NL80211_IFTYPE_NAN ||
!ieee80211_sdata_running(sdata))
return;
spin_lock_bh(&sdata->u.nan.func_lock);
func = ieee80211_find_nan_func_by_cookie(sdata, cookie);
if (func)
instance_id = func->instance_id;
spin_unlock_bh(&sdata->u.nan.func_lock);
if (instance_id)
drv_del_nan_func(sdata->local, sdata, instance_id);
}
static int ieee80211_set_noack_map(struct wiphy *wiphy,
struct net_device *dev,
u16 noack_map)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
sdata->noack_map = noack_map;
ieee80211_check_fast_xmit_iface(sdata);
return 0;
}
static int ieee80211_set_tx(struct ieee80211_sub_if_data *sdata,
const u8 *mac_addr, u8 key_idx)
{
struct ieee80211_local *local = sdata->local;
struct ieee80211_key *key;
struct sta_info *sta;
int ret = -EINVAL;
if (!wiphy_ext_feature_isset(local->hw.wiphy,
NL80211_EXT_FEATURE_EXT_KEY_ID))
return -EINVAL;
sta = sta_info_get_bss(sdata, mac_addr);
if (!sta)
return -EINVAL;
if (sta->ptk_idx == key_idx)
return 0;
key = wiphy_dereference(local->hw.wiphy, sta->ptk[key_idx]);
if (key && key->conf.flags & IEEE80211_KEY_FLAG_NO_AUTO_TX)
ret = ieee80211_set_tx_key(key);
return ret;
}
static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev,
int link_id, u8 key_idx, bool pairwise,
const u8 *mac_addr, struct key_params *params)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_link_data *link =
ieee80211_link_or_deflink(sdata, link_id, false);
struct ieee80211_local *local = sdata->local;
struct sta_info *sta = NULL;
struct ieee80211_key *key;
int err;
lockdep_assert_wiphy(local->hw.wiphy);
if (!ieee80211_sdata_running(sdata))
return -ENETDOWN;
if (IS_ERR(link))
return PTR_ERR(link);
if (pairwise && params->mode == NL80211_KEY_SET_TX)
return ieee80211_set_tx(sdata, mac_addr, key_idx);
/* reject WEP and TKIP keys if WEP failed to initialize */
switch (params->cipher) {
case WLAN_CIPHER_SUITE_WEP40:
case WLAN_CIPHER_SUITE_TKIP:
case WLAN_CIPHER_SUITE_WEP104:
if (link_id >= 0)
return -EINVAL;
if (WARN_ON_ONCE(fips_enabled))
return -EINVAL;
break;
default:
break;
}
key = ieee80211_key_alloc(params->cipher, key_idx, params->key_len,
params->key, params->seq_len, params->seq);
if (IS_ERR(key))
return PTR_ERR(key);
key->conf.link_id = link_id;
if (pairwise)
key->conf.flags |= IEEE80211_KEY_FLAG_PAIRWISE;
if (params->mode == NL80211_KEY_NO_TX)
key->conf.flags |= IEEE80211_KEY_FLAG_NO_AUTO_TX;
if (mac_addr) {
sta = sta_info_get_bss(sdata, mac_addr);
/*
* The ASSOC test makes sure the driver is ready to
* receive the key. When wpa_supplicant has roamed
* using FT, it attempts to set the key before
* association has completed, this rejects that attempt
* so it will set the key again after association.
*
* TODO: accept the key if we have a station entry and
* add it to the device after the station.
*/
if (!sta || !test_sta_flag(sta, WLAN_STA_ASSOC)) {
ieee80211_key_free_unused(key);
return -ENOENT;
}
}
switch (sdata->vif.type) {
case NL80211_IFTYPE_STATION:
if (sdata->u.mgd.mfp != IEEE80211_MFP_DISABLED)
key->conf.flags |= IEEE80211_KEY_FLAG_RX_MGMT;
break;
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_AP_VLAN:
/* Keys without a station are used for TX only */
if (sta && test_sta_flag(sta, WLAN_STA_MFP))
key->conf.flags |= IEEE80211_KEY_FLAG_RX_MGMT;
break;
case NL80211_IFTYPE_ADHOC:
/* no MFP (yet) */
break;
case NL80211_IFTYPE_MESH_POINT:
#ifdef CONFIG_MAC80211_MESH
if (sdata->u.mesh.security != IEEE80211_MESH_SEC_NONE)
key->conf.flags |= IEEE80211_KEY_FLAG_RX_MGMT;
break;
#endif
case NL80211_IFTYPE_WDS:
case NL80211_IFTYPE_MONITOR:
case NL80211_IFTYPE_P2P_DEVICE:
case NL80211_IFTYPE_NAN:
case NL80211_IFTYPE_UNSPECIFIED:
case NUM_NL80211_IFTYPES:
case NL80211_IFTYPE_P2P_CLIENT:
case NL80211_IFTYPE_P2P_GO:
case NL80211_IFTYPE_OCB:
/* shouldn't happen */
WARN_ON_ONCE(1);
break;
}
err = ieee80211_key_link(key, link, sta);
/* KRACK protection, shouldn't happen but just silently accept key */
if (err == -EALREADY)
err = 0;
return err;
}
static struct ieee80211_key *
ieee80211_lookup_key(struct ieee80211_sub_if_data *sdata, int link_id,
u8 key_idx, bool pairwise, const u8 *mac_addr)
{
struct ieee80211_local *local __maybe_unused = sdata->local;
struct ieee80211_link_data *link = &sdata->deflink;
struct ieee80211_key *key;
if (link_id >= 0) {
link = sdata_dereference(sdata->link[link_id], sdata);
if (!link)
return NULL;
}
if (mac_addr) {
struct sta_info *sta;
struct link_sta_info *link_sta;
sta = sta_info_get_bss(sdata, mac_addr);
if (!sta)
return NULL;
if (link_id >= 0) {
link_sta = rcu_dereference_check(sta->link[link_id],
lockdep_is_held(&local->hw.wiphy->mtx));
if (!link_sta)
return NULL;
} else {
link_sta = &sta->deflink;
}
if (pairwise && key_idx < NUM_DEFAULT_KEYS)
return wiphy_dereference(local->hw.wiphy,
sta->ptk[key_idx]);
if (!pairwise &&
key_idx < NUM_DEFAULT_KEYS +
NUM_DEFAULT_MGMT_KEYS +
NUM_DEFAULT_BEACON_KEYS)
return wiphy_dereference(local->hw.wiphy,
link_sta->gtk[key_idx]);
return NULL;
}
if (pairwise && key_idx < NUM_DEFAULT_KEYS)
return wiphy_dereference(local->hw.wiphy, sdata->keys[key_idx]);
key = wiphy_dereference(local->hw.wiphy, link->gtk[key_idx]);
if (key)
return key;
/* or maybe it was a WEP key */
if (key_idx < NUM_DEFAULT_KEYS)
return wiphy_dereference(local->hw.wiphy, sdata->keys[key_idx]);
return NULL;
}
static int ieee80211_del_key(struct wiphy *wiphy, struct net_device *dev,
int link_id, u8 key_idx, bool pairwise,
const u8 *mac_addr)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = sdata->local;
struct ieee80211_key *key;
lockdep_assert_wiphy(local->hw.wiphy);
key = ieee80211_lookup_key(sdata, link_id, key_idx, pairwise, mac_addr);
if (!key)
return -ENOENT;
mac80211: restrict delayed tailroom needed decrement As explained in ieee80211_delayed_tailroom_dec(), during roam, keys of the old AP will be destroyed and new keys will be installed. Deletion of the old key causes crypto_tx_tailroom_needed_cnt to go from 1 to 0 and the new key installation causes a transition from 0 to 1. Whenever crypto_tx_tailroom_needed_cnt transitions from 0 to 1, we invoke synchronize_net(); the reason for doing this is to avoid a race in the TX path as explained in increment_tailroom_need_count(). This synchronize_net() operation can be slow and can affect the station roam time. To avoid this, decrementing the crypto_tx_tailroom_needed_cnt is delayed for a while so that upon installation of new key the transition would be from 1 to 2 instead of 0 to 1 and thereby improving the roam time. This is all correct for a STA iftype, but deferring the tailroom_needed decrement for other iftypes may be unnecessary. For example, let's consider the case of a 4-addr client connecting to an AP for which AP_VLAN interface is also created, let the initial value for tailroom_needed on the AP be 1. * 4-addr client connects to the AP (AP: tailroom_needed = 1) * AP will clear old keys, delay decrement of tailroom_needed count * AP_VLAN is created, it takes the tailroom count from master (AP_VLAN: tailroom_needed = 1, AP: tailroom_needed = 1) * Install new key for the station, assume key is plumbed in the HW, there won't be any change in tailroom_needed count on AP iface * Delayed decrement of tailroom_needed count on AP (AP: tailroom_needed = 0, AP_VLAN: tailroom_needed = 1) Because of the delayed decrement on AP iface, tailroom_needed count goes out of sync between AP(master iface) and AP_VLAN(slave iface) and there would be unnecessary tailroom created for the packets going through AP_VLAN iface. Also, WARN_ONs were observed while trying to bring down the AP_VLAN interface: (warn_slowpath_common) (warn_slowpath_null+0x18/0x20) (warn_slowpath_null) (ieee80211_free_keys+0x114/0x1e4) (ieee80211_free_keys) (ieee80211_del_virtual_monitor+0x51c/0x850) (ieee80211_del_virtual_monitor) (ieee80211_stop+0x30/0x3c) (ieee80211_stop) (__dev_close_many+0x94/0xb8) (__dev_close_many) (dev_close_many+0x5c/0xc8) Restricting delayed decrement to station interface alone fixes the problem and it makes sense to do so because delayed decrement is done to improve roam time which is applicable only for client devices. Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-07-10 11:18:27 +00:00
ieee80211_key_free(key, sdata->vif.type == NL80211_IFTYPE_STATION);
return 0;
}
static int ieee80211_get_key(struct wiphy *wiphy, struct net_device *dev,
int link_id, u8 key_idx, bool pairwise,
const u8 *mac_addr, void *cookie,
void (*callback)(void *cookie,
struct key_params *params))
{
struct ieee80211_sub_if_data *sdata;
u8 seq[6] = {0};
struct key_params params;
struct ieee80211_key *key;
u64 pn64;
u32 iv32;
u16 iv16;
int err = -ENOENT;
struct ieee80211_key_seq kseq = {};
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
rcu_read_lock();
key = ieee80211_lookup_key(sdata, link_id, key_idx, pairwise, mac_addr);
if (!key)
goto out;
memset(&params, 0, sizeof(params));
params.cipher = key->conf.cipher;
switch (key->conf.cipher) {
case WLAN_CIPHER_SUITE_TKIP:
pn64 = atomic64_read(&key->conf.tx_pn);
iv32 = TKIP_PN_TO_IV32(pn64);
iv16 = TKIP_PN_TO_IV16(pn64);
if (key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE &&
!(key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV)) {
drv_get_key_seq(sdata->local, key, &kseq);
iv32 = kseq.tkip.iv32;
iv16 = kseq.tkip.iv16;
}
seq[0] = iv16 & 0xff;
seq[1] = (iv16 >> 8) & 0xff;
seq[2] = iv32 & 0xff;
seq[3] = (iv32 >> 8) & 0xff;
seq[4] = (iv32 >> 16) & 0xff;
seq[5] = (iv32 >> 24) & 0xff;
params.seq = seq;
params.seq_len = 6;
break;
case WLAN_CIPHER_SUITE_CCMP:
case WLAN_CIPHER_SUITE_CCMP_256:
case WLAN_CIPHER_SUITE_AES_CMAC:
case WLAN_CIPHER_SUITE_BIP_CMAC_256:
BUILD_BUG_ON(offsetof(typeof(kseq), ccmp) !=
offsetof(typeof(kseq), aes_cmac));
fallthrough;
case WLAN_CIPHER_SUITE_BIP_GMAC_128:
case WLAN_CIPHER_SUITE_BIP_GMAC_256:
BUILD_BUG_ON(offsetof(typeof(kseq), ccmp) !=
offsetof(typeof(kseq), aes_gmac));
fallthrough;
case WLAN_CIPHER_SUITE_GCMP:
case WLAN_CIPHER_SUITE_GCMP_256:
BUILD_BUG_ON(offsetof(typeof(kseq), ccmp) !=
offsetof(typeof(kseq), gcmp));
if (key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE &&
!(key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV)) {
drv_get_key_seq(sdata->local, key, &kseq);
memcpy(seq, kseq.ccmp.pn, 6);
} else {
pn64 = atomic64_read(&key->conf.tx_pn);
seq[0] = pn64;
seq[1] = pn64 >> 8;
seq[2] = pn64 >> 16;
seq[3] = pn64 >> 24;
seq[4] = pn64 >> 32;
seq[5] = pn64 >> 40;
}
params.seq = seq;
params.seq_len = 6;
break;
default:
if (!(key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE))
break;
if (WARN_ON(key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV))
break;
drv_get_key_seq(sdata->local, key, &kseq);
params.seq = kseq.hw.seq;
params.seq_len = kseq.hw.seq_len;
break;
}
params.key = key->conf.key;
params.key_len = key->conf.keylen;
callback(cookie, &params);
err = 0;
out:
rcu_read_unlock();
return err;
}
static int ieee80211_config_default_key(struct wiphy *wiphy,
struct net_device *dev,
int link_id, u8 key_idx, bool uni,
bool multi)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_link_data *link =
ieee80211_link_or_deflink(sdata, link_id, false);
if (IS_ERR(link))
return PTR_ERR(link);
ieee80211_set_default_key(link, key_idx, uni, multi);
return 0;
}
static int ieee80211_config_default_mgmt_key(struct wiphy *wiphy,
struct net_device *dev,
int link_id, u8 key_idx)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_link_data *link =
ieee80211_link_or_deflink(sdata, link_id, true);
if (IS_ERR(link))
return PTR_ERR(link);
ieee80211_set_default_mgmt_key(link, key_idx);
return 0;
}
static int ieee80211_config_default_beacon_key(struct wiphy *wiphy,
struct net_device *dev,
int link_id, u8 key_idx)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_link_data *link =
ieee80211_link_or_deflink(sdata, link_id, true);
if (IS_ERR(link))
return PTR_ERR(link);
ieee80211_set_default_beacon_key(link, key_idx);
return 0;
}
void sta_set_rate_info_tx(struct sta_info *sta,
const struct ieee80211_tx_rate *rate,
struct rate_info *rinfo)
{
rinfo->flags = 0;
if (rate->flags & IEEE80211_TX_RC_MCS) {
rinfo->flags |= RATE_INFO_FLAGS_MCS;
rinfo->mcs = rate->idx;
} else if (rate->flags & IEEE80211_TX_RC_VHT_MCS) {
rinfo->flags |= RATE_INFO_FLAGS_VHT_MCS;
rinfo->mcs = ieee80211_rate_get_vht_mcs(rate);
rinfo->nss = ieee80211_rate_get_vht_nss(rate);
} else {
struct ieee80211_supported_band *sband;
mac80211: Fix possible sband related NULL pointer de-reference Existing API 'ieee80211_get_sdata_band' returns default 2 GHz band even if the channel context configuration is NULL. This crashes for chipsets which support 5 Ghz alone when it tries to access members of 'sband'. Channel context configuration can be NULL in multivif case and when channel switch is in progress (or) when it fails. Fix this by replacing the API 'ieee80211_get_sdata_band' with 'ieee80211_get_sband' which returns a NULL pointer for sband when the channel configuration is NULL. An example scenario is as below: In multivif mode (AP + STA) with drivers like ath10k, when we do a channel switch in the AP vif (which has a number of clients connected) and a STA vif which is connected to some other AP, when the channel switch in AP vif fails, while the STA vifs tries to connect to the other AP, there is a window where the channel context is NULL/invalid and this results in a crash while the clients connected to the AP vif tries to reconnect and this race is very similar to the one investigated by Michal in https://patchwork.kernel.org/patch/3788161/ and this does happens with hardware that supports 5Ghz alone after long hours of testing with continuous channel switch on the AP vif ieee80211 phy0: channel context reservation cannot be finalized because some interfaces aren't switching wlan0: failed to finalize CSA, disconnecting wlan0-1: deauthenticating from 8c:fd:f0:01:54:9c by local choice (Reason: 3=DEAUTH_LEAVING) WARNING: CPU: 1 PID: 19032 at net/mac80211/ieee80211_i.h:1013 sta_info_alloc+0x374/0x3fc [mac80211] [<bf77272c>] (sta_info_alloc [mac80211]) [<bf78776c>] (ieee80211_add_station [mac80211])) [<bf73cc50>] (nl80211_new_station [cfg80211]) Unable to handle kernel NULL pointer dereference at virtual address 00000014 pgd = d5f4c000 Internal error: Oops: 17 [#1] PREEMPT SMP ARM PC is at sta_info_alloc+0x380/0x3fc [mac80211] LR is at sta_info_alloc+0x37c/0x3fc [mac80211] [<bf772738>] (sta_info_alloc [mac80211]) [<bf78776c>] (ieee80211_add_station [mac80211]) [<bf73cc50>] (nl80211_new_station [cfg80211])) Cc: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-27 07:15:38 +00:00
sband = ieee80211_get_sband(sta->sdata);
WARN_ON_ONCE(sband && !sband->bitrates);
if (sband && sband->bitrates)
rinfo->legacy = sband->bitrates[rate->idx].bitrate;
}
if (rate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH)
rinfo->bw = RATE_INFO_BW_40;
else if (rate->flags & IEEE80211_TX_RC_80_MHZ_WIDTH)
rinfo->bw = RATE_INFO_BW_80;
else if (rate->flags & IEEE80211_TX_RC_160_MHZ_WIDTH)
rinfo->bw = RATE_INFO_BW_160;
else
rinfo->bw = RATE_INFO_BW_20;
if (rate->flags & IEEE80211_TX_RC_SHORT_GI)
rinfo->flags |= RATE_INFO_FLAGS_SHORT_GI;
}
static int ieee80211_dump_station(struct wiphy *wiphy, struct net_device *dev,
int idx, u8 *mac, struct station_info *sinfo)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = sdata->local;
struct sta_info *sta;
int ret = -ENOENT;
lockdep_assert_wiphy(local->hw.wiphy);
sta = sta_info_get_by_idx(sdata, idx);
if (sta) {
ret = 0;
memcpy(mac, sta->sta.addr, ETH_ALEN);
sta_set_sinfo(sta, sinfo, true);
}
return ret;
}
static int ieee80211_dump_survey(struct wiphy *wiphy, struct net_device *dev,
int idx, struct survey_info *survey)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
return drv_get_survey(local, idx, survey);
}
static int ieee80211_get_station(struct wiphy *wiphy, struct net_device *dev,
const u8 *mac, struct station_info *sinfo)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = sdata->local;
struct sta_info *sta;
int ret = -ENOENT;
lockdep_assert_wiphy(local->hw.wiphy);
sta = sta_info_get_bss(sdata, mac);
if (sta) {
ret = 0;
sta_set_sinfo(sta, sinfo, true);
}
return ret;
}
static int ieee80211_set_monitor_channel(struct wiphy *wiphy,
struct cfg80211_chan_def *chandef)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
struct ieee80211_sub_if_data *sdata;
struct ieee80211_chan_req chanreq = { .oper = *chandef };
int ret;
lockdep_assert_wiphy(local->hw.wiphy);
if (cfg80211_chandef_identical(&local->monitor_chanreq.oper,
&chanreq.oper))
return 0;
sdata = wiphy_dereference(local->hw.wiphy,
local->monitor_sdata);
if (!sdata)
goto done;
if (cfg80211_chandef_identical(&sdata->vif.bss_conf.chanreq.oper,
&chanreq.oper))
return 0;
ieee80211_link_release_channel(&sdata->deflink);
ret = ieee80211_link_use_channel(&sdata->deflink, &chanreq,
IEEE80211_CHANCTX_EXCLUSIVE);
if (ret)
return ret;
done:
local->monitor_chanreq = chanreq;
return 0;
}
static int
ieee80211_set_probe_resp(struct ieee80211_sub_if_data *sdata,
const u8 *resp, size_t resp_len,
const struct ieee80211_csa_settings *csa,
const struct ieee80211_color_change_settings *cca,
struct ieee80211_link_data *link)
{
struct probe_resp *new, *old;
if (!resp || !resp_len)
return 1;
old = sdata_dereference(link->u.ap.probe_resp, sdata);
new = kzalloc(sizeof(struct probe_resp) + resp_len, GFP_KERNEL);
if (!new)
return -ENOMEM;
new->len = resp_len;
memcpy(new->data, resp, resp_len);
if (csa)
memcpy(new->cntdwn_counter_offsets, csa->counter_offsets_presp,
csa->n_counter_offsets_presp *
sizeof(new->cntdwn_counter_offsets[0]));
else if (cca)
new->cntdwn_counter_offsets[0] = cca->counter_offset_presp;
rcu_assign_pointer(link->u.ap.probe_resp, new);
if (old)
kfree_rcu(old, rcu_head);
return 0;
}
static int ieee80211_set_fils_discovery(struct ieee80211_sub_if_data *sdata,
struct cfg80211_fils_discovery *params,
struct ieee80211_link_data *link,
struct ieee80211_bss_conf *link_conf,
u64 *changed)
{
struct fils_discovery_data *new, *old = NULL;
struct ieee80211_fils_discovery *fd;
if (!params->update)
return 0;
fd = &link_conf->fils_discovery;
fd->min_interval = params->min_interval;
fd->max_interval = params->max_interval;
old = sdata_dereference(link->u.ap.fils_discovery, sdata);
if (old)
kfree_rcu(old, rcu_head);
if (params->tmpl && params->tmpl_len) {
new = kzalloc(sizeof(*new) + params->tmpl_len, GFP_KERNEL);
if (!new)
return -ENOMEM;
new->len = params->tmpl_len;
memcpy(new->data, params->tmpl, params->tmpl_len);
rcu_assign_pointer(link->u.ap.fils_discovery, new);
} else {
RCU_INIT_POINTER(link->u.ap.fils_discovery, NULL);
}
*changed |= BSS_CHANGED_FILS_DISCOVERY;
return 0;
}
static int
ieee80211_set_unsol_bcast_probe_resp(struct ieee80211_sub_if_data *sdata,
struct cfg80211_unsol_bcast_probe_resp *params,
struct ieee80211_link_data *link,
struct ieee80211_bss_conf *link_conf,
u64 *changed)
{
struct unsol_bcast_probe_resp_data *new, *old = NULL;
if (!params->update)
return 0;
link_conf->unsol_bcast_probe_resp_interval = params->interval;
old = sdata_dereference(link->u.ap.unsol_bcast_probe_resp, sdata);
if (old)
kfree_rcu(old, rcu_head);
if (params->tmpl && params->tmpl_len) {
new = kzalloc(sizeof(*new) + params->tmpl_len, GFP_KERNEL);
if (!new)
return -ENOMEM;
new->len = params->tmpl_len;
memcpy(new->data, params->tmpl, params->tmpl_len);
rcu_assign_pointer(link->u.ap.unsol_bcast_probe_resp, new);
} else {
RCU_INIT_POINTER(link->u.ap.unsol_bcast_probe_resp, NULL);
}
*changed |= BSS_CHANGED_UNSOL_BCAST_PROBE_RESP;
return 0;
}
static int ieee80211_set_ftm_responder_params(
struct ieee80211_sub_if_data *sdata,
const u8 *lci, size_t lci_len,
const u8 *civicloc, size_t civicloc_len,
struct ieee80211_bss_conf *link_conf)
{
struct ieee80211_ftm_responder_params *new, *old;
u8 *pos;
int len;
if (!lci_len && !civicloc_len)
return 0;
old = link_conf->ftmr_params;
len = lci_len + civicloc_len;
new = kzalloc(sizeof(*new) + len, GFP_KERNEL);
if (!new)
return -ENOMEM;
pos = (u8 *)(new + 1);
if (lci_len) {
new->lci_len = lci_len;
new->lci = pos;
memcpy(pos, lci, lci_len);
pos += lci_len;
}
if (civicloc_len) {
new->civicloc_len = civicloc_len;
new->civicloc = pos;
memcpy(pos, civicloc, civicloc_len);
pos += civicloc_len;
}
link_conf->ftmr_params = new;
kfree(old);
return 0;
}
static int
ieee80211_copy_mbssid_beacon(u8 *pos, struct cfg80211_mbssid_elems *dst,
struct cfg80211_mbssid_elems *src)
{
int i, offset = 0;
for (i = 0; i < src->cnt; i++) {
memcpy(pos + offset, src->elem[i].data, src->elem[i].len);
dst->elem[i].len = src->elem[i].len;
dst->elem[i].data = pos + offset;
offset += dst->elem[i].len;
}
dst->cnt = src->cnt;
return offset;
}
static int
ieee80211_copy_rnr_beacon(u8 *pos, struct cfg80211_rnr_elems *dst,
struct cfg80211_rnr_elems *src)
{
int i, offset = 0;
for (i = 0; i < src->cnt; i++) {
memcpy(pos + offset, src->elem[i].data, src->elem[i].len);
dst->elem[i].len = src->elem[i].len;
dst->elem[i].data = pos + offset;
offset += dst->elem[i].len;
}
dst->cnt = src->cnt;
return offset;
}
static int
ieee80211_assign_beacon(struct ieee80211_sub_if_data *sdata,
struct ieee80211_link_data *link,
struct cfg80211_beacon_data *params,
const struct ieee80211_csa_settings *csa,
const struct ieee80211_color_change_settings *cca,
u64 *changed)
{
struct cfg80211_mbssid_elems *mbssid = NULL;
struct cfg80211_rnr_elems *rnr = NULL;
struct beacon_data *new, *old;
int new_head_len, new_tail_len;
int size, err;
u64 _changed = BSS_CHANGED_BEACON;
struct ieee80211_bss_conf *link_conf = link->conf;
old = sdata_dereference(link->u.ap.beacon, sdata);
/* Need to have a beacon head if we don't have one yet */
if (!params->head && !old)
return -EINVAL;
/* new or old head? */
if (params->head)
new_head_len = params->head_len;
else
new_head_len = old->head_len;
/* new or old tail? */
if (params->tail || !old)
/* params->tail_len will be zero for !params->tail */
new_tail_len = params->tail_len;
else
new_tail_len = old->tail_len;
size = sizeof(*new) + new_head_len + new_tail_len;
/* new or old multiple BSSID elements? */
if (params->mbssid_ies) {
mbssid = params->mbssid_ies;
size += struct_size(new->mbssid_ies, elem, mbssid->cnt);
if (params->rnr_ies) {
rnr = params->rnr_ies;
size += struct_size(new->rnr_ies, elem, rnr->cnt);
}
size += ieee80211_get_mbssid_beacon_len(mbssid, rnr,
mbssid->cnt);
} else if (old && old->mbssid_ies) {
mbssid = old->mbssid_ies;
size += struct_size(new->mbssid_ies, elem, mbssid->cnt);
if (old && old->rnr_ies) {
rnr = old->rnr_ies;
size += struct_size(new->rnr_ies, elem, rnr->cnt);
}
size += ieee80211_get_mbssid_beacon_len(mbssid, rnr,
mbssid->cnt);
}
new = kzalloc(size, GFP_KERNEL);
if (!new)
return -ENOMEM;
/* start filling the new info now */
/*
* pointers go into the block we allocated,
* memory is | beacon_data | head | tail | mbssid_ies | rnr_ies
*/
new->head = ((u8 *) new) + sizeof(*new);
new->tail = new->head + new_head_len;
new->head_len = new_head_len;
new->tail_len = new_tail_len;
/* copy in optional mbssid_ies */
if (mbssid) {
u8 *pos = new->tail + new->tail_len;
new->mbssid_ies = (void *)pos;
pos += struct_size(new->mbssid_ies, elem, mbssid->cnt);
pos += ieee80211_copy_mbssid_beacon(pos, new->mbssid_ies,
mbssid);
if (rnr) {
new->rnr_ies = (void *)pos;
pos += struct_size(new->rnr_ies, elem, rnr->cnt);
ieee80211_copy_rnr_beacon(pos, new->rnr_ies, rnr);
}
/* update bssid_indicator */
link_conf->bssid_indicator =
ilog2(__roundup_pow_of_two(mbssid->cnt + 1));
}
if (csa) {
new->cntdwn_current_counter = csa->count;
memcpy(new->cntdwn_counter_offsets, csa->counter_offsets_beacon,
csa->n_counter_offsets_beacon *
sizeof(new->cntdwn_counter_offsets[0]));
} else if (cca) {
new->cntdwn_current_counter = cca->count;
new->cntdwn_counter_offsets[0] = cca->counter_offset_beacon;
}
/* copy in head */
if (params->head)
memcpy(new->head, params->head, new_head_len);
else
memcpy(new->head, old->head, new_head_len);
/* copy in optional tail */
if (params->tail)
memcpy(new->tail, params->tail, new_tail_len);
else
if (old)
memcpy(new->tail, old->tail, new_tail_len);
err = ieee80211_set_probe_resp(sdata, params->probe_resp,
params->probe_resp_len, csa, cca, link);
if (err < 0) {
kfree(new);
return err;
}
if (err == 0)
_changed |= BSS_CHANGED_AP_PROBE_RESP;
if (params->ftm_responder != -1) {
link_conf->ftm_responder = params->ftm_responder;
err = ieee80211_set_ftm_responder_params(sdata,
params->lci,
params->lci_len,
params->civicloc,
params->civicloc_len,
link_conf);
if (err < 0) {
kfree(new);
return err;
}
_changed |= BSS_CHANGED_FTM_RESPONDER;
}
rcu_assign_pointer(link->u.ap.beacon, new);
sdata->u.ap.active = true;
if (old)
kfree_rcu(old, rcu_head);
*changed |= _changed;
return 0;
}
static u8 ieee80211_num_beaconing_links(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_link_data *link;
u8 link_id, num = 0;
if (sdata->vif.type != NL80211_IFTYPE_AP &&
sdata->vif.type != NL80211_IFTYPE_P2P_GO)
return num;
if (!sdata->vif.valid_links)
return num;
for (link_id = 0; link_id < IEEE80211_MLD_MAX_NUM_LINKS; link_id++) {
link = sdata_dereference(sdata->link[link_id], sdata);
if (!link)
continue;
if (sdata_dereference(link->u.ap.beacon, sdata))
num++;
}
return num;
}
static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_ap_settings *params)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = sdata->local;
struct beacon_data *old;
struct ieee80211_sub_if_data *vlan;
u64 changed = BSS_CHANGED_BEACON_INT |
BSS_CHANGED_BEACON_ENABLED |
BSS_CHANGED_BEACON |
BSS_CHANGED_P2P_PS |
BSS_CHANGED_TXPOWER |
BSS_CHANGED_TWT;
int i, err;
int prev_beacon_int;
unsigned int link_id = params->beacon.link_id;
struct ieee80211_link_data *link;
struct ieee80211_bss_conf *link_conf;
struct ieee80211_chan_req chanreq = { .oper = params->chandef };
lockdep_assert_wiphy(local->hw.wiphy);
link = sdata_dereference(sdata->link[link_id], sdata);
if (!link)
return -ENOLINK;
link_conf = link->conf;
old = sdata_dereference(link->u.ap.beacon, sdata);
if (old)
return -EALREADY;
if (params->smps_mode != NL80211_SMPS_OFF)
return -EOPNOTSUPP;
link->smps_mode = IEEE80211_SMPS_OFF;
mac80211: don't send SMPS action frame in AP mode when not needed mac80211 allows to modify the SMPS state of an AP both, when it is started, and after it has been started. Such a change will trigger an action frame to all the peers that are currently connected, and will be remembered so that new peers will get notified as soon as they connect (since the SMPS setting in the beacon may not be the right one). This means that we need to remember the SMPS state currently requested as well as the SMPS state that was configured initially (and advertised in the beacon). The former is bss->req_smps and the latter is sdata->smps_mode. Initially, the AP interface could only be started with SMPS_OFF, which means that sdata->smps_mode was SMPS_OFF always. Later, a nl80211 API was added to be able to start an AP with a different AP mode. That code forgot to update bss->req_smps and because of that, if the AP interface was started with SMPS_DYNAMIC, we had: sdata->smps_mode = SMPS_DYNAMIC bss->req_smps = SMPS_OFF That configuration made mac80211 think it needs to fire off an action frame to any new station connecting to the AP in order to let it know that the actual SMPS configuration is SMPS_OFF. Fix that by properly setting bss->req_smps in ieee80211_start_ap. Fixes: f69931748730 ("mac80211: set smps_mode according to ap params") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-06-10 10:52:45 +00:00
link->needed_rx_chains = sdata->local->rx_chains;
prev_beacon_int = link_conf->beacon_int;
link_conf->beacon_int = params->beacon_interval;
if (params->ht_cap)
link_conf->ht_ldpc =
params->ht_cap->cap_info &
cpu_to_le16(IEEE80211_HT_CAP_LDPC_CODING);
if (params->vht_cap) {
link_conf->vht_ldpc =
params->vht_cap->vht_cap_info &
cpu_to_le32(IEEE80211_VHT_CAP_RXLDPC);
link_conf->vht_su_beamformer =
params->vht_cap->vht_cap_info &
cpu_to_le32(IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE);
link_conf->vht_su_beamformee =
params->vht_cap->vht_cap_info &
cpu_to_le32(IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE);
link_conf->vht_mu_beamformer =
params->vht_cap->vht_cap_info &
cpu_to_le32(IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE);
link_conf->vht_mu_beamformee =
params->vht_cap->vht_cap_info &
cpu_to_le32(IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE);
}
if (params->he_cap && params->he_oper) {
link_conf->he_support = true;
link_conf->htc_trig_based_pkt_ext =
le32_get_bits(params->he_oper->he_oper_params,
IEEE80211_HE_OPERATION_DFLT_PE_DURATION_MASK);
link_conf->frame_time_rts_th =
le32_get_bits(params->he_oper->he_oper_params,
IEEE80211_HE_OPERATION_RTS_THRESHOLD_MASK);
changed |= BSS_CHANGED_HE_OBSS_PD;
if (params->beacon.he_bss_color.enabled)
changed |= BSS_CHANGED_HE_BSS_COLOR;
}
if (params->he_cap) {
link_conf->he_ldpc =
params->he_cap->phy_cap_info[1] &
IEEE80211_HE_PHY_CAP1_LDPC_CODING_IN_PAYLOAD;
link_conf->he_su_beamformer =
params->he_cap->phy_cap_info[3] &
IEEE80211_HE_PHY_CAP3_SU_BEAMFORMER;
link_conf->he_su_beamformee =
params->he_cap->phy_cap_info[4] &
IEEE80211_HE_PHY_CAP4_SU_BEAMFORMEE;
link_conf->he_mu_beamformer =
params->he_cap->phy_cap_info[4] &
IEEE80211_HE_PHY_CAP4_MU_BEAMFORMER;
link_conf->he_full_ul_mumimo =
params->he_cap->phy_cap_info[2] &
IEEE80211_HE_PHY_CAP2_UL_MU_FULL_MU_MIMO;
}
if (params->eht_cap) {
if (!link_conf->he_support)
return -EOPNOTSUPP;
link_conf->eht_support = true;
link_conf->eht_su_beamformer =
params->eht_cap->fixed.phy_cap_info[0] &
IEEE80211_EHT_PHY_CAP0_SU_BEAMFORMER;
link_conf->eht_su_beamformee =
params->eht_cap->fixed.phy_cap_info[0] &
IEEE80211_EHT_PHY_CAP0_SU_BEAMFORMEE;
link_conf->eht_mu_beamformer =
params->eht_cap->fixed.phy_cap_info[7] &
(IEEE80211_EHT_PHY_CAP7_MU_BEAMFORMER_80MHZ |
IEEE80211_EHT_PHY_CAP7_MU_BEAMFORMER_160MHZ |
IEEE80211_EHT_PHY_CAP7_MU_BEAMFORMER_320MHZ);
} else {
link_conf->eht_su_beamformer = false;
link_conf->eht_su_beamformee = false;
link_conf->eht_mu_beamformer = false;
}
if (sdata->vif.type == NL80211_IFTYPE_AP &&
params->mbssid_config.tx_wdev) {
err = ieee80211_set_ap_mbssid_options(sdata,
params->mbssid_config,
link_conf);
if (err)
return err;
}
err = ieee80211_link_use_channel(link, &chanreq,
IEEE80211_CHANCTX_SHARED);
if (!err)
ieee80211_link_copy_chanctx_to_vlans(link, false);
if (err) {
link_conf->beacon_int = prev_beacon_int;
return err;
}
/*
* Apply control port protocol, this allows us to
* not encrypt dynamic WEP control frames.
*/
sdata->control_port_protocol = params->crypto.control_port_ethertype;
sdata->control_port_no_encrypt = params->crypto.control_port_no_encrypt;
sdata->control_port_over_nl80211 =
params->crypto.control_port_over_nl80211;
sdata->control_port_no_preauth =
params->crypto.control_port_no_preauth;
list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list) {
vlan->control_port_protocol =
params->crypto.control_port_ethertype;
vlan->control_port_no_encrypt =
params->crypto.control_port_no_encrypt;
vlan->control_port_over_nl80211 =
params->crypto.control_port_over_nl80211;
vlan->control_port_no_preauth =
params->crypto.control_port_no_preauth;
}
link_conf->dtim_period = params->dtim_period;
link_conf->enable_beacon = true;
link_conf->allow_p2p_go_ps = sdata->vif.p2p;
link_conf->twt_responder = params->twt_responder;
link_conf->he_obss_pd = params->he_obss_pd;
link_conf->he_bss_color = params->beacon.he_bss_color;
sdata->vif.cfg.s1g = params->chandef.chan->band ==
NL80211_BAND_S1GHZ;
sdata->vif.cfg.ssid_len = params->ssid_len;
if (params->ssid_len)
memcpy(sdata->vif.cfg.ssid, params->ssid,
params->ssid_len);
link_conf->hidden_ssid =
(params->hidden_ssid != NL80211_HIDDEN_SSID_NOT_IN_USE);
memset(&link_conf->p2p_noa_attr, 0,
sizeof(link_conf->p2p_noa_attr));
link_conf->p2p_noa_attr.oppps_ctwindow =
params->p2p_ctwindow & IEEE80211_P2P_OPPPS_CTWINDOW_MASK;
if (params->p2p_opp_ps)
link_conf->p2p_noa_attr.oppps_ctwindow |=
IEEE80211_P2P_OPPPS_ENABLE_BIT;
sdata->beacon_rate_set = false;
if (wiphy_ext_feature_isset(local->hw.wiphy,
NL80211_EXT_FEATURE_BEACON_RATE_LEGACY)) {
for (i = 0; i < NUM_NL80211_BANDS; i++) {
sdata->beacon_rateidx_mask[i] =
params->beacon_rate.control[i].legacy;
if (sdata->beacon_rateidx_mask[i])
sdata->beacon_rate_set = true;
}
}
if (ieee80211_hw_check(&local->hw, HAS_RATE_CONTROL))
link_conf->beacon_tx_rate = params->beacon_rate;
err = ieee80211_assign_beacon(sdata, link, &params->beacon, NULL, NULL,
&changed);
if (err < 0)
goto error;
err = ieee80211_set_fils_discovery(sdata, &params->fils_discovery,
link, link_conf, &changed);
if (err < 0)
goto error;
err = ieee80211_set_unsol_bcast_probe_resp(sdata,
&params->unsol_bcast_probe_resp,
link, link_conf, &changed);
if (err < 0)
goto error;
err = drv_start_ap(sdata->local, sdata, link_conf);
if (err) {
old = sdata_dereference(link->u.ap.beacon, sdata);
if (old)
kfree_rcu(old, rcu_head);
RCU_INIT_POINTER(link->u.ap.beacon, NULL);
sdata->u.ap.active = false;
goto error;
}
ieee80211_recalc_dtim(local, sdata);
ieee80211_vif_cfg_change_notify(sdata, BSS_CHANGED_SSID);
ieee80211_link_info_change_notify(sdata, link, changed);
if (ieee80211_num_beaconing_links(sdata) <= 1)
netif_carrier_on(dev);
list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list)
netif_carrier_on(vlan->dev);
return 0;
error:
ieee80211_link_release_channel(link);
return err;
}
static int ieee80211_change_beacon(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_ap_update *params)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_link_data *link;
struct cfg80211_beacon_data *beacon = &params->beacon;
struct beacon_data *old;
int err;
struct ieee80211_bss_conf *link_conf;
u64 changed = 0;
lockdep_assert_wiphy(wiphy);
link = sdata_dereference(sdata->link[beacon->link_id], sdata);
if (!link)
return -ENOLINK;
link_conf = link->conf;
/* don't allow changing the beacon while a countdown is in place - offset
* of channel switch counter may change
*/
if (link_conf->csa_active || link_conf->color_change_active)
return -EBUSY;
old = sdata_dereference(link->u.ap.beacon, sdata);
if (!old)
return -ENOENT;
err = ieee80211_assign_beacon(sdata, link, beacon, NULL, NULL,
&changed);
if (err < 0)
return err;
err = ieee80211_set_fils_discovery(sdata, &params->fils_discovery,
link, link_conf, &changed);
if (err < 0)
return err;
err = ieee80211_set_unsol_bcast_probe_resp(sdata,
&params->unsol_bcast_probe_resp,
link, link_conf, &changed);
if (err < 0)
return err;
if (beacon->he_bss_color_valid &&
beacon->he_bss_color.enabled != link_conf->he_bss_color.enabled) {
link_conf->he_bss_color.enabled = beacon->he_bss_color.enabled;
changed |= BSS_CHANGED_HE_BSS_COLOR;
}
ieee80211_link_info_change_notify(sdata, link, changed);
return 0;
}
static void ieee80211_free_next_beacon(struct ieee80211_link_data *link)
{
if (!link->u.ap.next_beacon)
return;
kfree(link->u.ap.next_beacon->mbssid_ies);
kfree(link->u.ap.next_beacon->rnr_ies);
kfree(link->u.ap.next_beacon);
link->u.ap.next_beacon = NULL;
}
static int ieee80211_stop_ap(struct wiphy *wiphy, struct net_device *dev,
unsigned int link_id)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_sub_if_data *vlan;
struct ieee80211_local *local = sdata->local;
struct beacon_data *old_beacon;
struct probe_resp *old_probe_resp;
struct fils_discovery_data *old_fils_discovery;
struct unsol_bcast_probe_resp_data *old_unsol_bcast_probe_resp;
struct cfg80211_chan_def chandef;
struct ieee80211_link_data *link =
sdata_dereference(sdata->link[link_id], sdata);
struct ieee80211_bss_conf *link_conf = link->conf;
LIST_HEAD(keys);
lockdep_assert_wiphy(local->hw.wiphy);
old_beacon = sdata_dereference(link->u.ap.beacon, sdata);
if (!old_beacon)
return -ENOENT;
old_probe_resp = sdata_dereference(link->u.ap.probe_resp,
sdata);
old_fils_discovery = sdata_dereference(link->u.ap.fils_discovery,
sdata);
old_unsol_bcast_probe_resp =
sdata_dereference(link->u.ap.unsol_bcast_probe_resp,
sdata);
/* abort any running channel switch or color change */
link_conf->csa_active = false;
link_conf->color_change_active = false;
if (sdata->csa_blocked_tx) {
ieee80211_wake_vif_queues(local, sdata,
IEEE80211_QUEUE_STOP_REASON_CSA);
sdata->csa_blocked_tx = false;
}
ieee80211_free_next_beacon(link);
/* turn off carrier for this interface and dependent VLANs */
list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list)
netif_carrier_off(vlan->dev);
if (ieee80211_num_beaconing_links(sdata) <= 1)
netif_carrier_off(dev);
/* remove beacon and probe response */
sdata->u.ap.active = false;
RCU_INIT_POINTER(link->u.ap.beacon, NULL);
RCU_INIT_POINTER(link->u.ap.probe_resp, NULL);
RCU_INIT_POINTER(link->u.ap.fils_discovery, NULL);
RCU_INIT_POINTER(link->u.ap.unsol_bcast_probe_resp, NULL);
kfree_rcu(old_beacon, rcu_head);
if (old_probe_resp)
kfree_rcu(old_probe_resp, rcu_head);
if (old_fils_discovery)
kfree_rcu(old_fils_discovery, rcu_head);
if (old_unsol_bcast_probe_resp)
kfree_rcu(old_unsol_bcast_probe_resp, rcu_head);
kfree(link_conf->ftmr_params);
link_conf->ftmr_params = NULL;
sdata->vif.mbssid_tx_vif = NULL;
link_conf->bssid_index = 0;
link_conf->nontransmitted = false;
link_conf->ema_ap = false;
link_conf->bssid_indicator = 0;
__sta_info_flush(sdata, true, link_id);
ieee80211_remove_link_keys(link, &keys);
if (!list_empty(&keys)) {
synchronize_net();
ieee80211_free_key_list(local, &keys);
}
link_conf->enable_beacon = false;
sdata->beacon_rate_set = false;
sdata->vif.cfg.ssid_len = 0;
clear_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, &sdata->state);
ieee80211_link_info_change_notify(sdata, link,
BSS_CHANGED_BEACON_ENABLED);
if (sdata->wdev.cac_started) {
chandef = link_conf->chanreq.oper;
wiphy_delayed_work_cancel(wiphy, &link->dfs_cac_timer_work);
cfg80211_cac_event(sdata->dev, &chandef,
NL80211_RADAR_CAC_ABORTED,
GFP_KERNEL);
}
drv_stop_ap(sdata->local, sdata, link_conf);
/* free all potentially still buffered bcast frames */
local->total_ps_buffered -= skb_queue_len(&sdata->u.ap.ps.bc_buf);
ieee80211_purge_tx_queue(&local->hw, &sdata->u.ap.ps.bc_buf);
ieee80211_link_copy_chanctx_to_vlans(link, true);
ieee80211_link_release_channel(link);
return 0;
}
static int sta_apply_auth_flags(struct ieee80211_local *local,
struct sta_info *sta,
u32 mask, u32 set)
{
int ret;
if (mask & BIT(NL80211_STA_FLAG_AUTHENTICATED) &&
set & BIT(NL80211_STA_FLAG_AUTHENTICATED) &&
!test_sta_flag(sta, WLAN_STA_AUTH)) {
ret = sta_info_move_state(sta, IEEE80211_STA_AUTH);
if (ret)
return ret;
}
if (mask & BIT(NL80211_STA_FLAG_ASSOCIATED) &&
set & BIT(NL80211_STA_FLAG_ASSOCIATED) &&
!test_sta_flag(sta, WLAN_STA_ASSOC)) {
/*
* When peer becomes associated, init rate control as
* well. Some drivers require rate control initialized
* before drv_sta_state() is called.
*/
if (!test_sta_flag(sta, WLAN_STA_RATE_CONTROL))
rate_control_rate_init(sta);
ret = sta_info_move_state(sta, IEEE80211_STA_ASSOC);
if (ret)
return ret;
}
if (mask & BIT(NL80211_STA_FLAG_AUTHORIZED)) {
if (set & BIT(NL80211_STA_FLAG_AUTHORIZED))
ret = sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED);
else if (test_sta_flag(sta, WLAN_STA_AUTHORIZED))
ret = sta_info_move_state(sta, IEEE80211_STA_ASSOC);
else
ret = 0;
if (ret)
return ret;
}
if (mask & BIT(NL80211_STA_FLAG_ASSOCIATED) &&
!(set & BIT(NL80211_STA_FLAG_ASSOCIATED)) &&
test_sta_flag(sta, WLAN_STA_ASSOC)) {
ret = sta_info_move_state(sta, IEEE80211_STA_AUTH);
if (ret)
return ret;
}
if (mask & BIT(NL80211_STA_FLAG_AUTHENTICATED) &&
!(set & BIT(NL80211_STA_FLAG_AUTHENTICATED)) &&
test_sta_flag(sta, WLAN_STA_AUTH)) {
ret = sta_info_move_state(sta, IEEE80211_STA_NONE);
if (ret)
return ret;
}
return 0;
}
static void sta_apply_mesh_params(struct ieee80211_local *local,
struct sta_info *sta,
struct station_parameters *params)
{
#ifdef CONFIG_MAC80211_MESH
struct ieee80211_sub_if_data *sdata = sta->sdata;
u64 changed = 0;
if (params->sta_modify_mask & STATION_PARAM_APPLY_PLINK_STATE) {
switch (params->plink_state) {
case NL80211_PLINK_ESTAB:
if (sta->mesh->plink_state != NL80211_PLINK_ESTAB)
changed = mesh_plink_inc_estab_count(sdata);
sta->mesh->plink_state = params->plink_state;
sta->mesh->aid = params->peer_aid;
ieee80211_mps_sta_status_update(sta);
changed |= ieee80211_mps_set_sta_local_pm(sta,
sdata->u.mesh.mshcfg.power_mode);
ewma_mesh_tx_rate_avg_init(&sta->mesh->tx_rate_avg);
/* init at low value */
ewma_mesh_tx_rate_avg_add(&sta->mesh->tx_rate_avg, 10);
break;
case NL80211_PLINK_LISTEN:
case NL80211_PLINK_BLOCKED:
case NL80211_PLINK_OPN_SNT:
case NL80211_PLINK_OPN_RCVD:
case NL80211_PLINK_CNF_RCVD:
case NL80211_PLINK_HOLDING:
if (sta->mesh->plink_state == NL80211_PLINK_ESTAB)
changed = mesh_plink_dec_estab_count(sdata);
sta->mesh->plink_state = params->plink_state;
ieee80211_mps_sta_status_update(sta);
changed |= ieee80211_mps_set_sta_local_pm(sta,
NL80211_MESH_POWER_UNKNOWN);
break;
default:
/* nothing */
break;
}
}
switch (params->plink_action) {
case NL80211_PLINK_ACTION_NO_ACTION:
/* nothing */
break;
case NL80211_PLINK_ACTION_OPEN:
changed |= mesh_plink_open(sta);
break;
case NL80211_PLINK_ACTION_BLOCK:
changed |= mesh_plink_block(sta);
break;
}
if (params->local_pm)
changed |= ieee80211_mps_set_sta_local_pm(sta,
params->local_pm);
ieee80211_mbss_info_change_notify(sdata, changed);
#endif
}
static int sta_link_apply_parameters(struct ieee80211_local *local,
struct sta_info *sta, bool new_link,
struct link_station_parameters *params)
{
int ret = 0;
struct ieee80211_supported_band *sband;
struct ieee80211_sub_if_data *sdata = sta->sdata;
u32 link_id = params->link_id < 0 ? 0 : params->link_id;
struct ieee80211_link_data *link =
sdata_dereference(sdata->link[link_id], sdata);
struct link_sta_info *link_sta =
rcu_dereference_protected(sta->link[link_id],
lockdep_is_held(&local->hw.wiphy->mtx));
/*
wifi: mac80211: check if the existing link config remains unchanged [Syz report] WARNING: CPU: 1 PID: 5067 at net/mac80211/rate.c:48 rate_control_rate_init+0x540/0x690 net/mac80211/rate.c:48 Modules linked in: CPU: 1 PID: 5067 Comm: syz-executor413 Not tainted 6.7.0-rc3-syzkaller-00014-gdf60cee26a2e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023 RIP: 0010:rate_control_rate_init+0x540/0x690 net/mac80211/rate.c:48 Code: 48 c7 c2 00 46 0c 8c be 08 03 00 00 48 c7 c7 c0 45 0c 8c c6 05 70 79 0b 05 01 e8 1b a0 6f f7 e9 e0 fd ff ff e8 61 b3 8f f7 90 <0f> 0b 90 e9 36 ff ff ff e8 53 b3 8f f7 e8 5e 0b 78 f7 31 ff 89 c3 RSP: 0018:ffffc90003c57248 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff888016bc4000 RCX: ffffffff89f7d519 RDX: ffff888076d43b80 RSI: ffffffff89f7d6df RDI: 0000000000000005 RBP: ffff88801daaae20 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000002 R12: 0000000000000001 R13: 0000000000000000 R14: ffff888020030e20 R15: ffff888078f08000 FS: 0000555556b94380(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000005fdeb8 CR3: 0000000076d22000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> sta_apply_auth_flags.constprop.0+0x4b7/0x510 net/mac80211/cfg.c:1674 sta_apply_parameters+0xaf1/0x16c0 net/mac80211/cfg.c:2002 ieee80211_add_station+0x3fa/0x6c0 net/mac80211/cfg.c:2068 rdev_add_station net/wireless/rdev-ops.h:201 [inline] nl80211_new_station+0x13ba/0x1a70 net/wireless/nl80211.c:7603 genl_family_rcv_msg_doit+0x1fc/0x2e0 net/netlink/genetlink.c:972 genl_family_rcv_msg net/netlink/genetlink.c:1052 [inline] genl_rcv_msg+0x561/0x800 net/netlink/genetlink.c:1067 netlink_rcv_skb+0x16b/0x440 net/netlink/af_netlink.c:2545 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1076 netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline] netlink_unicast+0x53b/0x810 net/netlink/af_netlink.c:1368 netlink_sendmsg+0x93c/0xe40 net/netlink/af_netlink.c:1910 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0xd5/0x180 net/socket.c:745 ____sys_sendmsg+0x6ac/0x940 net/socket.c:2584 ___sys_sendmsg+0x135/0x1d0 net/socket.c:2638 __sys_sendmsg+0x117/0x1e0 net/socket.c:2667 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b [Analysis] It is inappropriate to make a link configuration change judgment on an non-existent and non new link. [Fix] Quickly exit when there is a existent link and the link configuration has not changed. Fixes: b303835dabe0 ("wifi: mac80211: accept STA changes without link changes") Reported-and-tested-by: syzbot+62d7eef57b09bfebcd84@syzkaller.appspotmail.com Signed-off-by: Edward Adam Davis <eadavis@qq.com> Link: https://msgid.link/tencent_DE67FF86DB92ED465489A36ECD2EDDCC8C06@qq.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-11-29 12:17:47 +00:00
* If there are no changes, then accept a link that exist,
* unless it's a new link.
*/
wifi: mac80211: check if the existing link config remains unchanged [Syz report] WARNING: CPU: 1 PID: 5067 at net/mac80211/rate.c:48 rate_control_rate_init+0x540/0x690 net/mac80211/rate.c:48 Modules linked in: CPU: 1 PID: 5067 Comm: syz-executor413 Not tainted 6.7.0-rc3-syzkaller-00014-gdf60cee26a2e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023 RIP: 0010:rate_control_rate_init+0x540/0x690 net/mac80211/rate.c:48 Code: 48 c7 c2 00 46 0c 8c be 08 03 00 00 48 c7 c7 c0 45 0c 8c c6 05 70 79 0b 05 01 e8 1b a0 6f f7 e9 e0 fd ff ff e8 61 b3 8f f7 90 <0f> 0b 90 e9 36 ff ff ff e8 53 b3 8f f7 e8 5e 0b 78 f7 31 ff 89 c3 RSP: 0018:ffffc90003c57248 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff888016bc4000 RCX: ffffffff89f7d519 RDX: ffff888076d43b80 RSI: ffffffff89f7d6df RDI: 0000000000000005 RBP: ffff88801daaae20 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000002 R12: 0000000000000001 R13: 0000000000000000 R14: ffff888020030e20 R15: ffff888078f08000 FS: 0000555556b94380(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000005fdeb8 CR3: 0000000076d22000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> sta_apply_auth_flags.constprop.0+0x4b7/0x510 net/mac80211/cfg.c:1674 sta_apply_parameters+0xaf1/0x16c0 net/mac80211/cfg.c:2002 ieee80211_add_station+0x3fa/0x6c0 net/mac80211/cfg.c:2068 rdev_add_station net/wireless/rdev-ops.h:201 [inline] nl80211_new_station+0x13ba/0x1a70 net/wireless/nl80211.c:7603 genl_family_rcv_msg_doit+0x1fc/0x2e0 net/netlink/genetlink.c:972 genl_family_rcv_msg net/netlink/genetlink.c:1052 [inline] genl_rcv_msg+0x561/0x800 net/netlink/genetlink.c:1067 netlink_rcv_skb+0x16b/0x440 net/netlink/af_netlink.c:2545 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1076 netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline] netlink_unicast+0x53b/0x810 net/netlink/af_netlink.c:1368 netlink_sendmsg+0x93c/0xe40 net/netlink/af_netlink.c:1910 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0xd5/0x180 net/socket.c:745 ____sys_sendmsg+0x6ac/0x940 net/socket.c:2584 ___sys_sendmsg+0x135/0x1d0 net/socket.c:2638 __sys_sendmsg+0x117/0x1e0 net/socket.c:2667 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b [Analysis] It is inappropriate to make a link configuration change judgment on an non-existent and non new link. [Fix] Quickly exit when there is a existent link and the link configuration has not changed. Fixes: b303835dabe0 ("wifi: mac80211: accept STA changes without link changes") Reported-and-tested-by: syzbot+62d7eef57b09bfebcd84@syzkaller.appspotmail.com Signed-off-by: Edward Adam Davis <eadavis@qq.com> Link: https://msgid.link/tencent_DE67FF86DB92ED465489A36ECD2EDDCC8C06@qq.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-11-29 12:17:47 +00:00
if (params->link_id >= 0 && !new_link &&
!params->link_mac && !params->txpwr_set &&
!params->supported_rates_len &&
!params->ht_capa && !params->vht_capa &&
!params->he_capa && !params->eht_capa &&
!params->opmode_notif_used)
return 0;
if (!link || !link_sta)
return -EINVAL;
sband = ieee80211_get_link_sband(link);
if (!sband)
return -EINVAL;
if (params->link_mac) {
if (new_link) {
memcpy(link_sta->addr, params->link_mac, ETH_ALEN);
memcpy(link_sta->pub->addr, params->link_mac, ETH_ALEN);
} else if (!ether_addr_equal(link_sta->addr,
params->link_mac)) {
return -EINVAL;
}
} else if (new_link) {
return -EINVAL;
}
if (params->txpwr_set) {
link_sta->pub->txpwr.type = params->txpwr.type;
if (params->txpwr.type == NL80211_TX_POWER_LIMITED)
link_sta->pub->txpwr.power = params->txpwr.power;
ret = drv_sta_set_txpwr(local, sdata, sta);
if (ret)
return ret;
}
if (params->supported_rates &&
params->supported_rates_len) {
ieee80211_parse_bitrates(link->conf->chanreq.oper.width,
sband, params->supported_rates,
params->supported_rates_len,
&link_sta->pub->supp_rates[sband->band]);
}
if (params->ht_capa)
ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband,
params->ht_capa, link_sta);
/* VHT can override some HT caps such as the A-MSDU max length */
if (params->vht_capa)
ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband,
params->vht_capa, NULL,
link_sta);
if (params->he_capa)
ieee80211_he_cap_ie_to_sta_he_cap(sdata, sband,
(void *)params->he_capa,
params->he_capa_len,
(void *)params->he_6ghz_capa,
link_sta);
if (params->he_capa && params->eht_capa)
ieee80211_eht_cap_ie_to_sta_eht_cap(sdata, sband,
(u8 *)params->he_capa,
params->he_capa_len,
params->eht_capa,
params->eht_capa_len,
link_sta);
if (params->opmode_notif_used) {
/* returned value is only needed for rc update, but the
* rc isn't initialized here yet, so ignore it
*/
__ieee80211_vht_handle_opmode(sdata, link_sta,
params->opmode_notif,
sband->band);
}
ieee80211_sta_init_nss(link_sta);
return ret;
}
static int sta_apply_parameters(struct ieee80211_local *local,
struct sta_info *sta,
struct station_parameters *params)
{
struct ieee80211_sub_if_data *sdata = sta->sdata;
u32 mask, set;
int ret = 0;
mask = params->sta_flags_mask;
set = params->sta_flags_set;
if (ieee80211_vif_is_mesh(&sdata->vif)) {
/*
* In mesh mode, ASSOCIATED isn't part of the nl80211
* API but must follow AUTHENTICATED for driver state.
*/
if (mask & BIT(NL80211_STA_FLAG_AUTHENTICATED))
mask |= BIT(NL80211_STA_FLAG_ASSOCIATED);
if (set & BIT(NL80211_STA_FLAG_AUTHENTICATED))
set |= BIT(NL80211_STA_FLAG_ASSOCIATED);
} else if (test_sta_flag(sta, WLAN_STA_TDLS_PEER)) {
/*
* TDLS -- everything follows authorized, but
* only becoming authorized is possible, not
* going back
*/
if (set & BIT(NL80211_STA_FLAG_AUTHORIZED)) {
set |= BIT(NL80211_STA_FLAG_AUTHENTICATED) |
BIT(NL80211_STA_FLAG_ASSOCIATED);
mask |= BIT(NL80211_STA_FLAG_AUTHENTICATED) |
BIT(NL80211_STA_FLAG_ASSOCIATED);
}
}
if (mask & BIT(NL80211_STA_FLAG_WME) &&
local->hw.queues >= IEEE80211_NUM_ACS)
sta->sta.wme = set & BIT(NL80211_STA_FLAG_WME);
/* auth flags will be set later for TDLS,
* and for unassociated stations that move to associated */
if (!test_sta_flag(sta, WLAN_STA_TDLS_PEER) &&
!((mask & BIT(NL80211_STA_FLAG_ASSOCIATED)) &&
(set & BIT(NL80211_STA_FLAG_ASSOCIATED)))) {
ret = sta_apply_auth_flags(local, sta, mask, set);
if (ret)
return ret;
}
if (mask & BIT(NL80211_STA_FLAG_SHORT_PREAMBLE)) {
if (set & BIT(NL80211_STA_FLAG_SHORT_PREAMBLE))
set_sta_flag(sta, WLAN_STA_SHORT_PREAMBLE);
else
clear_sta_flag(sta, WLAN_STA_SHORT_PREAMBLE);
}
if (mask & BIT(NL80211_STA_FLAG_MFP)) {
sta->sta.mfp = !!(set & BIT(NL80211_STA_FLAG_MFP));
if (set & BIT(NL80211_STA_FLAG_MFP))
set_sta_flag(sta, WLAN_STA_MFP);
else
clear_sta_flag(sta, WLAN_STA_MFP);
}
if (mask & BIT(NL80211_STA_FLAG_TDLS_PEER)) {
if (set & BIT(NL80211_STA_FLAG_TDLS_PEER))
set_sta_flag(sta, WLAN_STA_TDLS_PEER);
else
clear_sta_flag(sta, WLAN_STA_TDLS_PEER);
}
if (mask & BIT(NL80211_STA_FLAG_SPP_AMSDU))
sta->sta.spp_amsdu = set & BIT(NL80211_STA_FLAG_SPP_AMSDU);
/* mark TDLS channel switch support, if the AP allows it */
if (test_sta_flag(sta, WLAN_STA_TDLS_PEER) &&
!sdata->deflink.u.mgd.tdls_chan_switch_prohibited &&
params->ext_capab_len >= 4 &&
params->ext_capab[3] & WLAN_EXT_CAPA4_TDLS_CHAN_SWITCH)
set_sta_flag(sta, WLAN_STA_TDLS_CHAN_SWITCH);
if (test_sta_flag(sta, WLAN_STA_TDLS_PEER) &&
!sdata->u.mgd.tdls_wider_bw_prohibited &&
ieee80211_hw_check(&local->hw, TDLS_WIDER_BW) &&
params->ext_capab_len >= 8 &&
params->ext_capab[7] & WLAN_EXT_CAPA8_TDLS_WIDE_BW_ENABLED)
set_sta_flag(sta, WLAN_STA_TDLS_WIDER_BW);
if (params->sta_modify_mask & STATION_PARAM_APPLY_UAPSD) {
sta->sta.uapsd_queues = params->uapsd_queues;
sta->sta.max_sp = params->max_sp;
}
ieee80211_sta_set_max_amsdu_subframes(sta, params->ext_capab,
params->ext_capab_len);
/*
* cfg80211 validates this (1-2007) and allows setting the AID
* only when creating a new station entry
*/
if (params->aid)
sta->sta.aid = params->aid;
/*
* Some of the following updates would be racy if called on an
* existing station, via ieee80211_change_station(). However,
* all such changes are rejected by cfg80211 except for updates
* changing the supported rates on an existing but not yet used
* TDLS peer.
*/
if (params->listen_interval >= 0)
sta->listen_interval = params->listen_interval;
ret = sta_link_apply_parameters(local, sta, false,
&params->link_sta_params);
if (ret)
return ret;
if (params->support_p2p_ps >= 0)
sta->sta.support_p2p_ps = params->support_p2p_ps;
if (ieee80211_vif_is_mesh(&sdata->vif))
sta_apply_mesh_params(local, sta, params);
mac80211: Add airtime accounting and scheduling to TXQs This adds airtime accounting and scheduling to the mac80211 TXQ scheduler. A new callback, ieee80211_sta_register_airtime(), is added that drivers can call to report airtime usage for stations. When airtime information is present, mac80211 will schedule TXQs (through ieee80211_next_txq()) in a way that enforces airtime fairness between active stations. This scheduling works the same way as the ath9k in-driver airtime fairness scheduling. If no airtime usage is reported by the driver, the scheduler will default to round-robin scheduling. For drivers that don't control TXQ scheduling in software, a new API function, ieee80211_txq_may_transmit(), is added which the driver can use to check if the TXQ is eligible for transmission, or should be throttled to enforce fairness. Calls to this function must also be enclosed in ieee80211_txq_schedule_{start,end}() calls to ensure proper locking. The API ieee80211_txq_may_transmit() also ensures that TXQ list will be aligned aginst driver's own round-robin scheduler list. i.e it rotates the TXQ list till it makes the requested node becomes the first entry in TXQ list. Thus both the TXQ list and driver's list are in sync. Co-developed-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Louie Lu <git@louie.lu> [added debugfs write op to reset airtime counter] Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-12-19 01:02:08 +00:00
if (params->airtime_weight)
sta->airtime_weight = params->airtime_weight;
mac80211: Add airtime accounting and scheduling to TXQs This adds airtime accounting and scheduling to the mac80211 TXQ scheduler. A new callback, ieee80211_sta_register_airtime(), is added that drivers can call to report airtime usage for stations. When airtime information is present, mac80211 will schedule TXQs (through ieee80211_next_txq()) in a way that enforces airtime fairness between active stations. This scheduling works the same way as the ath9k in-driver airtime fairness scheduling. If no airtime usage is reported by the driver, the scheduler will default to round-robin scheduling. For drivers that don't control TXQ scheduling in software, a new API function, ieee80211_txq_may_transmit(), is added which the driver can use to check if the TXQ is eligible for transmission, or should be throttled to enforce fairness. Calls to this function must also be enclosed in ieee80211_txq_schedule_{start,end}() calls to ensure proper locking. The API ieee80211_txq_may_transmit() also ensures that TXQ list will be aligned aginst driver's own round-robin scheduler list. i.e it rotates the TXQ list till it makes the requested node becomes the first entry in TXQ list. Thus both the TXQ list and driver's list are in sync. Co-developed-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Louie Lu <git@louie.lu> [added debugfs write op to reset airtime counter] Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-12-19 01:02:08 +00:00
/* set the STA state after all sta info from usermode has been set */
if (test_sta_flag(sta, WLAN_STA_TDLS_PEER) ||
set & BIT(NL80211_STA_FLAG_ASSOCIATED)) {
ret = sta_apply_auth_flags(local, sta, mask, set);
if (ret)
return ret;
}
/* Mark the STA as MLO if MLD MAC address is available */
if (params->link_sta_params.mld_mac)
sta->sta.mlo = true;
return 0;
}
static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev,
const u8 *mac,
struct station_parameters *params)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
struct sta_info *sta;
struct ieee80211_sub_if_data *sdata;
int err;
lockdep_assert_wiphy(local->hw.wiphy);
if (params->vlan) {
sdata = IEEE80211_DEV_TO_SUB_IF(params->vlan);
if (sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
sdata->vif.type != NL80211_IFTYPE_AP)
return -EINVAL;
} else
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (ether_addr_equal(mac, sdata->vif.addr))
return -EINVAL;
if (!is_valid_ether_addr(mac))
return -EINVAL;
if (params->sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER) &&
sdata->vif.type == NL80211_IFTYPE_STATION &&
!sdata->u.mgd.associated)
return -EINVAL;
/*
* If we have a link ID, it can be a non-MLO station on an AP MLD,
* but we need to have a link_mac in that case as well, so use the
* STA's MAC address in that case.
*/
if (params->link_sta_params.link_id >= 0)
sta = sta_info_alloc_with_link(sdata, mac,
params->link_sta_params.link_id,
params->link_sta_params.link_mac ?: mac,
GFP_KERNEL);
else
sta = sta_info_alloc(sdata, mac, GFP_KERNEL);
if (!sta)
return -ENOMEM;
if (params->sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER))
sta->sta.tdls = true;
/* Though the mutex is not needed here (since the station is not
* visible yet), sta_apply_parameters (and inner functions) require
* the mutex due to other paths.
*/
err = sta_apply_parameters(local, sta, params);
if (err) {
sta_info_free(local, sta);
return err;
}
/*
* for TDLS and for unassociated station, rate control should be
* initialized only when rates are known and station is marked
* authorized/associated
*/
if (!test_sta_flag(sta, WLAN_STA_TDLS_PEER) &&
test_sta_flag(sta, WLAN_STA_ASSOC))
rate_control_rate_init(sta);
return sta_info_insert(sta);
}
static int ieee80211_del_station(struct wiphy *wiphy, struct net_device *dev,
struct station_del_parameters *params)
{
struct ieee80211_sub_if_data *sdata;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (params->mac)
return sta_info_destroy_addr_bss(sdata, params->mac);
sta_info_flush(sdata, params->link_id);
return 0;
}
static int ieee80211_change_station(struct wiphy *wiphy,
struct net_device *dev, const u8 *mac,
struct station_parameters *params)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = wiphy_priv(wiphy);
struct sta_info *sta;
struct ieee80211_sub_if_data *vlansdata;
enum cfg80211_station_type statype;
int err;
lockdep_assert_wiphy(local->hw.wiphy);
sta = sta_info_get_bss(sdata, mac);
if (!sta)
return -ENOENT;
switch (sdata->vif.type) {
case NL80211_IFTYPE_MESH_POINT:
if (sdata->u.mesh.user_mpm)
statype = CFG80211_STA_MESH_PEER_USER;
else
statype = CFG80211_STA_MESH_PEER_KERNEL;
break;
case NL80211_IFTYPE_ADHOC:
statype = CFG80211_STA_IBSS;
break;
case NL80211_IFTYPE_STATION:
if (!test_sta_flag(sta, WLAN_STA_TDLS_PEER)) {
statype = CFG80211_STA_AP_STA;
break;
}
if (test_sta_flag(sta, WLAN_STA_AUTHORIZED))
statype = CFG80211_STA_TDLS_PEER_ACTIVE;
else
statype = CFG80211_STA_TDLS_PEER_SETUP;
break;
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_AP_VLAN:
if (test_sta_flag(sta, WLAN_STA_ASSOC))
statype = CFG80211_STA_AP_CLIENT;
else
statype = CFG80211_STA_AP_CLIENT_UNASSOC;
break;
default:
return -EOPNOTSUPP;
}
err = cfg80211_check_station_change(wiphy, params, statype);
if (err)
return err;
if (params->vlan && params->vlan != sta->sdata->dev) {
vlansdata = IEEE80211_DEV_TO_SUB_IF(params->vlan);
if (params->vlan->ieee80211_ptr->use_4addr) {
if (vlansdata->u.vlan.sta)
return -EBUSY;
rcu_assign_pointer(vlansdata->u.vlan.sta, sta);
mac80211: add fast-rx path The regular RX path has a lot of code, but with a few assumptions on the hardware it's possible to reduce the amount of code significantly. Currently the assumptions on the driver are the following: * hardware/driver reordering buffer (if supporting aggregation) * hardware/driver decryption & PN checking (if using encryption) * hardware/driver did de-duplication * hardware/driver did A-MSDU deaggregation * AP_LINK_PS is used (in AP mode) * no client powersave handling in mac80211 (in client mode) of which some are actually checked per packet: * de-duplication * PN checking * decryption and additionally packets must * not be A-MSDU (have been deaggregated by driver/device) * be data packets * not be fragmented * be unicast * have RFC 1042 header Additionally dynamically we assume: * no encryption or CCMP/GCMP, TKIP/WEP/other not allowed * station must be authorized * 4-addr format not enabled Some data needed for the RX path is cached in a new per-station "fast_rx" structure, so that we only need to look at this and the packet, no other memory when processing packets on the fast RX path. After doing the above per-packet checks, the data path collapses down to a pretty simple conversion function taking advantage of the data cached in the small fast_rx struct. This should speed up the RX processing, and will make it easier to reason about parallelizing RX (for which statistics will need to be per-CPU still.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-03-31 17:02:10 +00:00
__ieee80211_check_fast_rx_iface(vlansdata);
drv_sta_set_4addr(local, sta->sdata, &sta->sta, true);
}
if (sta->sdata->vif.type == NL80211_IFTYPE_AP_VLAN &&
mac80211: clear sta->fast_rx when STA removed from 4-addr VLAN In some race conditions, with more clients and traffic configuration, below crash is seen when making the interface down. sta->fast_rx wasn't cleared when STA gets removed from 4-addr AP_VLAN interface. The crash is due to try accessing 4-addr AP_VLAN interface's net_device (fast_rx->dev) which has been deleted already. Resolve this by clearing sta->fast_rx pointer when STA removes from a 4-addr VLAN. [ 239.449529] Unable to handle kernel NULL pointer dereference at virtual address 00000004 [ 239.449531] pgd = 80204000 ... [ 239.481496] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.4.60 #227 [ 239.481591] Hardware name: Generic DT based system [ 239.487665] task: be05b700 ti: be08e000 task.ti: be08e000 [ 239.492360] PC is at get_rps_cpu+0x2d4/0x31c [ 239.497823] LR is at 0xbe08fc54 ... [ 239.778574] [<80739740>] (get_rps_cpu) from [<8073cb10>] (netif_receive_skb_internal+0x8c/0xac) [ 239.786722] [<8073cb10>] (netif_receive_skb_internal) from [<8073d578>] (napi_gro_receive+0x48/0xc4) [ 239.795267] [<8073d578>] (napi_gro_receive) from [<c7b83e8c>] (ieee80211_mark_rx_ba_filtered_frames+0xbcc/0x12d4 [mac80211]) [ 239.804776] [<c7b83e8c>] (ieee80211_mark_rx_ba_filtered_frames [mac80211]) from [<c7b84d4c>] (ieee80211_rx_napi+0x7b8/0x8c8 [mac8 0211]) [ 239.815857] [<c7b84d4c>] (ieee80211_rx_napi [mac80211]) from [<c7f63d7c>] (ath11k_dp_process_rx+0x7bc/0x8c8 [ath11k]) [ 239.827757] [<c7f63d7c>] (ath11k_dp_process_rx [ath11k]) from [<c7f5b6c4>] (ath11k_dp_service_srng+0x2c0/0x2e0 [ath11k]) [ 239.838484] [<c7f5b6c4>] (ath11k_dp_service_srng [ath11k]) from [<7f55b7dc>] (ath11k_ahb_ext_grp_napi_poll+0x20/0x84 [ath11k_ahb] ) [ 239.849419] [<7f55b7dc>] (ath11k_ahb_ext_grp_napi_poll [ath11k_ahb]) from [<8073ce1c>] (net_rx_action+0xe0/0x28c) [ 239.860945] [<8073ce1c>] (net_rx_action) from [<80324868>] (__do_softirq+0xe4/0x228) [ 239.871269] [<80324868>] (__do_softirq) from [<80324c48>] (irq_exit+0x98/0x108) [ 239.879080] [<80324c48>] (irq_exit) from [<8035c59c>] (__handle_domain_irq+0x90/0xb4) [ 239.886114] [<8035c59c>] (__handle_domain_irq) from [<8030137c>] (gic_handle_irq+0x50/0x94) [ 239.894100] [<8030137c>] (gic_handle_irq) from [<803024c0>] (__irq_svc+0x40/0x74) Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org> Link: https://lore.kernel.org/r/1616163532-3881-1-git-send-email-seevalam@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-03-19 14:18:52 +00:00
sta->sdata->u.vlan.sta) {
ieee80211_clear_fast_rx(sta);
RCU_INIT_POINTER(sta->sdata->u.vlan.sta, NULL);
mac80211: clear sta->fast_rx when STA removed from 4-addr VLAN In some race conditions, with more clients and traffic configuration, below crash is seen when making the interface down. sta->fast_rx wasn't cleared when STA gets removed from 4-addr AP_VLAN interface. The crash is due to try accessing 4-addr AP_VLAN interface's net_device (fast_rx->dev) which has been deleted already. Resolve this by clearing sta->fast_rx pointer when STA removes from a 4-addr VLAN. [ 239.449529] Unable to handle kernel NULL pointer dereference at virtual address 00000004 [ 239.449531] pgd = 80204000 ... [ 239.481496] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.4.60 #227 [ 239.481591] Hardware name: Generic DT based system [ 239.487665] task: be05b700 ti: be08e000 task.ti: be08e000 [ 239.492360] PC is at get_rps_cpu+0x2d4/0x31c [ 239.497823] LR is at 0xbe08fc54 ... [ 239.778574] [<80739740>] (get_rps_cpu) from [<8073cb10>] (netif_receive_skb_internal+0x8c/0xac) [ 239.786722] [<8073cb10>] (netif_receive_skb_internal) from [<8073d578>] (napi_gro_receive+0x48/0xc4) [ 239.795267] [<8073d578>] (napi_gro_receive) from [<c7b83e8c>] (ieee80211_mark_rx_ba_filtered_frames+0xbcc/0x12d4 [mac80211]) [ 239.804776] [<c7b83e8c>] (ieee80211_mark_rx_ba_filtered_frames [mac80211]) from [<c7b84d4c>] (ieee80211_rx_napi+0x7b8/0x8c8 [mac8 0211]) [ 239.815857] [<c7b84d4c>] (ieee80211_rx_napi [mac80211]) from [<c7f63d7c>] (ath11k_dp_process_rx+0x7bc/0x8c8 [ath11k]) [ 239.827757] [<c7f63d7c>] (ath11k_dp_process_rx [ath11k]) from [<c7f5b6c4>] (ath11k_dp_service_srng+0x2c0/0x2e0 [ath11k]) [ 239.838484] [<c7f5b6c4>] (ath11k_dp_service_srng [ath11k]) from [<7f55b7dc>] (ath11k_ahb_ext_grp_napi_poll+0x20/0x84 [ath11k_ahb] ) [ 239.849419] [<7f55b7dc>] (ath11k_ahb_ext_grp_napi_poll [ath11k_ahb]) from [<8073ce1c>] (net_rx_action+0xe0/0x28c) [ 239.860945] [<8073ce1c>] (net_rx_action) from [<80324868>] (__do_softirq+0xe4/0x228) [ 239.871269] [<80324868>] (__do_softirq) from [<80324c48>] (irq_exit+0x98/0x108) [ 239.879080] [<80324c48>] (irq_exit) from [<8035c59c>] (__handle_domain_irq+0x90/0xb4) [ 239.886114] [<8035c59c>] (__handle_domain_irq) from [<8030137c>] (gic_handle_irq+0x50/0x94) [ 239.894100] [<8030137c>] (gic_handle_irq) from [<803024c0>] (__irq_svc+0x40/0x74) Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org> Link: https://lore.kernel.org/r/1616163532-3881-1-git-send-email-seevalam@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-03-19 14:18:52 +00:00
}
if (test_sta_flag(sta, WLAN_STA_AUTHORIZED))
ieee80211_vif_dec_num_mcast(sta->sdata);
sta->sdata = vlansdata;
ieee80211_check_fast_xmit(sta);
mac80211: Do not send Layer 2 Update frame before authorization The Layer 2 Update frame is used to update bridges when a station roams to another AP even if that STA does not transmit any frames after the reassociation. This behavior was described in IEEE Std 802.11F-2003 as something that would happen based on MLME-ASSOCIATE.indication, i.e., before completing 4-way handshake. However, this IEEE trial-use recommended practice document was published before RSN (IEEE Std 802.11i-2004) and as such, did not consider RSN use cases. Furthermore, IEEE Std 802.11F-2003 was withdrawn in 2006 and as such, has not been maintained amd should not be used anymore. Sending out the Layer 2 Update frame immediately after association is fine for open networks (and also when using SAE, FT protocol, or FILS authentication when the station is actually authenticated by the time association completes). However, it is not appropriate for cases where RSN is used with PSK or EAP authentication since the station is actually fully authenticated only once the 4-way handshake completes after authentication and attackers might be able to use the unauthenticated triggering of Layer 2 Update frame transmission to disrupt bridge behavior. Fix this by postponing transmission of the Layer 2 Update frame from station entry addition to the point when the station entry is marked authorized. Similarly, send out the VLAN binding update only if the STA entry has already been authorized. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11 13:03:05 +00:00
if (test_sta_flag(sta, WLAN_STA_AUTHORIZED)) {
ieee80211_vif_inc_num_mcast(sta->sdata);
mac80211: Do not send Layer 2 Update frame before authorization The Layer 2 Update frame is used to update bridges when a station roams to another AP even if that STA does not transmit any frames after the reassociation. This behavior was described in IEEE Std 802.11F-2003 as something that would happen based on MLME-ASSOCIATE.indication, i.e., before completing 4-way handshake. However, this IEEE trial-use recommended practice document was published before RSN (IEEE Std 802.11i-2004) and as such, did not consider RSN use cases. Furthermore, IEEE Std 802.11F-2003 was withdrawn in 2006 and as such, has not been maintained amd should not be used anymore. Sending out the Layer 2 Update frame immediately after association is fine for open networks (and also when using SAE, FT protocol, or FILS authentication when the station is actually authenticated by the time association completes). However, it is not appropriate for cases where RSN is used with PSK or EAP authentication since the station is actually fully authenticated only once the 4-way handshake completes after authentication and attackers might be able to use the unauthenticated triggering of Layer 2 Update frame transmission to disrupt bridge behavior. Fix this by postponing transmission of the Layer 2 Update frame from station entry addition to the point when the station entry is marked authorized. Similarly, send out the VLAN binding update only if the STA entry has already been authorized. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11 13:03:05 +00:00
cfg80211_send_layer2_update(sta->sdata->dev,
sta->sta.addr);
}
}
err = sta_apply_parameters(local, sta, params);
if (err)
return err;
if (sdata->vif.type == NL80211_IFTYPE_STATION &&
params->sta_flags_mask & BIT(NL80211_STA_FLAG_AUTHORIZED)) {
ieee80211_recalc_ps(local);
ieee80211_recalc_ps_vif(sdata);
}
return 0;
}
#ifdef CONFIG_MAC80211_MESH
static int ieee80211_add_mpath(struct wiphy *wiphy, struct net_device *dev,
const u8 *dst, const u8 *next_hop)
{
struct ieee80211_sub_if_data *sdata;
struct mesh_path *mpath;
struct sta_info *sta;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
rcu_read_lock();
sta = sta_info_get(sdata, next_hop);
if (!sta) {
rcu_read_unlock();
return -ENOENT;
}
mpath = mesh_path_add(sdata, dst);
if (IS_ERR(mpath)) {
rcu_read_unlock();
return PTR_ERR(mpath);
}
mesh_path_fix_nexthop(mpath, sta);
rcu_read_unlock();
return 0;
}
static int ieee80211_del_mpath(struct wiphy *wiphy, struct net_device *dev,
const u8 *dst)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (dst)
return mesh_path_del(sdata, dst);
mesh_path_flush_by_iface(sdata);
return 0;
}
static int ieee80211_change_mpath(struct wiphy *wiphy, struct net_device *dev,
const u8 *dst, const u8 *next_hop)
{
struct ieee80211_sub_if_data *sdata;
struct mesh_path *mpath;
struct sta_info *sta;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
rcu_read_lock();
sta = sta_info_get(sdata, next_hop);
if (!sta) {
rcu_read_unlock();
return -ENOENT;
}
mpath = mesh_path_lookup(sdata, dst);
if (!mpath) {
rcu_read_unlock();
return -ENOENT;
}
mesh_path_fix_nexthop(mpath, sta);
rcu_read_unlock();
return 0;
}
static void mpath_set_pinfo(struct mesh_path *mpath, u8 *next_hop,
struct mpath_info *pinfo)
{
struct sta_info *next_hop_sta = rcu_dereference(mpath->next_hop);
if (next_hop_sta)
memcpy(next_hop, next_hop_sta->sta.addr, ETH_ALEN);
else
eth_zero_addr(next_hop);
memset(pinfo, 0, sizeof(*pinfo));
pinfo->generation = mpath->sdata->u.mesh.mesh_paths_generation;
pinfo->filled = MPATH_INFO_FRAME_QLEN |
MPATH_INFO_SN |
MPATH_INFO_METRIC |
MPATH_INFO_EXPTIME |
MPATH_INFO_DISCOVERY_TIMEOUT |
MPATH_INFO_DISCOVERY_RETRIES |
MPATH_INFO_FLAGS |
MPATH_INFO_HOP_COUNT |
MPATH_INFO_PATH_CHANGE;
pinfo->frame_qlen = mpath->frame_queue.qlen;
pinfo->sn = mpath->sn;
pinfo->metric = mpath->metric;
if (time_before(jiffies, mpath->exp_time))
pinfo->exptime = jiffies_to_msecs(mpath->exp_time - jiffies);
pinfo->discovery_timeout =
jiffies_to_msecs(mpath->discovery_timeout);
pinfo->discovery_retries = mpath->discovery_retries;
if (mpath->flags & MESH_PATH_ACTIVE)
pinfo->flags |= NL80211_MPATH_FLAG_ACTIVE;
if (mpath->flags & MESH_PATH_RESOLVING)
pinfo->flags |= NL80211_MPATH_FLAG_RESOLVING;
if (mpath->flags & MESH_PATH_SN_VALID)
pinfo->flags |= NL80211_MPATH_FLAG_SN_VALID;
if (mpath->flags & MESH_PATH_FIXED)
pinfo->flags |= NL80211_MPATH_FLAG_FIXED;
if (mpath->flags & MESH_PATH_RESOLVED)
pinfo->flags |= NL80211_MPATH_FLAG_RESOLVED;
pinfo->hop_count = mpath->hop_count;
pinfo->path_change_count = mpath->path_change_count;
}
static int ieee80211_get_mpath(struct wiphy *wiphy, struct net_device *dev,
u8 *dst, u8 *next_hop, struct mpath_info *pinfo)
{
struct ieee80211_sub_if_data *sdata;
struct mesh_path *mpath;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
rcu_read_lock();
mpath = mesh_path_lookup(sdata, dst);
if (!mpath) {
rcu_read_unlock();
return -ENOENT;
}
memcpy(dst, mpath->dst, ETH_ALEN);
mpath_set_pinfo(mpath, next_hop, pinfo);
rcu_read_unlock();
return 0;
}
static int ieee80211_dump_mpath(struct wiphy *wiphy, struct net_device *dev,
int idx, u8 *dst, u8 *next_hop,
struct mpath_info *pinfo)
{
struct ieee80211_sub_if_data *sdata;
struct mesh_path *mpath;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
rcu_read_lock();
mpath = mesh_path_lookup_by_idx(sdata, idx);
if (!mpath) {
rcu_read_unlock();
return -ENOENT;
}
memcpy(dst, mpath->dst, ETH_ALEN);
mpath_set_pinfo(mpath, next_hop, pinfo);
rcu_read_unlock();
return 0;
}
static void mpp_set_pinfo(struct mesh_path *mpath, u8 *mpp,
struct mpath_info *pinfo)
{
memset(pinfo, 0, sizeof(*pinfo));
memcpy(mpp, mpath->mpp, ETH_ALEN);
pinfo->generation = mpath->sdata->u.mesh.mpp_paths_generation;
}
static int ieee80211_get_mpp(struct wiphy *wiphy, struct net_device *dev,
u8 *dst, u8 *mpp, struct mpath_info *pinfo)
{
struct ieee80211_sub_if_data *sdata;
struct mesh_path *mpath;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
rcu_read_lock();
mpath = mpp_path_lookup(sdata, dst);
if (!mpath) {
rcu_read_unlock();
return -ENOENT;
}
memcpy(dst, mpath->dst, ETH_ALEN);
mpp_set_pinfo(mpath, mpp, pinfo);
rcu_read_unlock();
return 0;
}
static int ieee80211_dump_mpp(struct wiphy *wiphy, struct net_device *dev,
int idx, u8 *dst, u8 *mpp,
struct mpath_info *pinfo)
{
struct ieee80211_sub_if_data *sdata;
struct mesh_path *mpath;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
rcu_read_lock();
mpath = mpp_path_lookup_by_idx(sdata, idx);
if (!mpath) {
rcu_read_unlock();
return -ENOENT;
}
memcpy(dst, mpath->dst, ETH_ALEN);
mpp_set_pinfo(mpath, mpp, pinfo);
rcu_read_unlock();
return 0;
}
static int ieee80211_get_mesh_config(struct wiphy *wiphy,
struct net_device *dev,
struct mesh_config *conf)
{
struct ieee80211_sub_if_data *sdata;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
memcpy(conf, &(sdata->u.mesh.mshcfg), sizeof(struct mesh_config));
return 0;
}
static inline bool _chg_mesh_attr(enum nl80211_meshconf_params parm, u32 mask)
{
return (mask >> (parm-1)) & 0x1;
}
static int copy_mesh_setup(struct ieee80211_if_mesh *ifmsh,
const struct mesh_setup *setup)
{
u8 *new_ie;
struct ieee80211_sub_if_data *sdata = container_of(ifmsh,
struct ieee80211_sub_if_data, u.mesh);
int i;
/* allocate information elements */
new_ie = NULL;
if (setup->ie_len) {
new_ie = kmemdup(setup->ie, setup->ie_len,
GFP_KERNEL);
if (!new_ie)
return -ENOMEM;
}
ifmsh->ie_len = setup->ie_len;
ifmsh->ie = new_ie;
/* now copy the rest of the setup parameters */
ifmsh->mesh_id_len = setup->mesh_id_len;
memcpy(ifmsh->mesh_id, setup->mesh_id, ifmsh->mesh_id_len);
ifmsh->mesh_sp_id = setup->sync_method;
ifmsh->mesh_pp_id = setup->path_sel_proto;
ifmsh->mesh_pm_id = setup->path_metric;
ifmsh->user_mpm = setup->user_mpm;
ifmsh->mesh_auth_id = setup->auth_id;
ifmsh->security = IEEE80211_MESH_SEC_NONE;
ifmsh->userspace_handles_dfs = setup->userspace_handles_dfs;
if (setup->is_authenticated)
ifmsh->security |= IEEE80211_MESH_SEC_AUTHED;
if (setup->is_secure)
ifmsh->security |= IEEE80211_MESH_SEC_SECURED;
/* mcast rate setting in Mesh Node */
memcpy(sdata->vif.bss_conf.mcast_rate, setup->mcast_rate,
sizeof(setup->mcast_rate));
sdata->vif.bss_conf.basic_rates = setup->basic_rates;
sdata->vif.bss_conf.beacon_int = setup->beacon_interval;
sdata->vif.bss_conf.dtim_period = setup->dtim_period;
sdata->beacon_rate_set = false;
if (wiphy_ext_feature_isset(sdata->local->hw.wiphy,
NL80211_EXT_FEATURE_BEACON_RATE_LEGACY)) {
for (i = 0; i < NUM_NL80211_BANDS; i++) {
sdata->beacon_rateidx_mask[i] =
setup->beacon_rate.control[i].legacy;
if (sdata->beacon_rateidx_mask[i])
sdata->beacon_rate_set = true;
}
}
return 0;
}
static int ieee80211_update_mesh_config(struct wiphy *wiphy,
struct net_device *dev, u32 mask,
const struct mesh_config *nconf)
{
struct mesh_config *conf;
struct ieee80211_sub_if_data *sdata;
struct ieee80211_if_mesh *ifmsh;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
ifmsh = &sdata->u.mesh;
/* Set the config options which we are interested in setting */
conf = &(sdata->u.mesh.mshcfg);
if (_chg_mesh_attr(NL80211_MESHCONF_RETRY_TIMEOUT, mask))
conf->dot11MeshRetryTimeout = nconf->dot11MeshRetryTimeout;
if (_chg_mesh_attr(NL80211_MESHCONF_CONFIRM_TIMEOUT, mask))
conf->dot11MeshConfirmTimeout = nconf->dot11MeshConfirmTimeout;
if (_chg_mesh_attr(NL80211_MESHCONF_HOLDING_TIMEOUT, mask))
conf->dot11MeshHoldingTimeout = nconf->dot11MeshHoldingTimeout;
if (_chg_mesh_attr(NL80211_MESHCONF_MAX_PEER_LINKS, mask))
conf->dot11MeshMaxPeerLinks = nconf->dot11MeshMaxPeerLinks;
if (_chg_mesh_attr(NL80211_MESHCONF_MAX_RETRIES, mask))
conf->dot11MeshMaxRetries = nconf->dot11MeshMaxRetries;
if (_chg_mesh_attr(NL80211_MESHCONF_TTL, mask))
conf->dot11MeshTTL = nconf->dot11MeshTTL;
if (_chg_mesh_attr(NL80211_MESHCONF_ELEMENT_TTL, mask))
conf->element_ttl = nconf->element_ttl;
if (_chg_mesh_attr(NL80211_MESHCONF_AUTO_OPEN_PLINKS, mask)) {
if (ifmsh->user_mpm)
return -EBUSY;
conf->auto_open_plinks = nconf->auto_open_plinks;
}
if (_chg_mesh_attr(NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR, mask))
conf->dot11MeshNbrOffsetMaxNeighbor =
nconf->dot11MeshNbrOffsetMaxNeighbor;
if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES, mask))
conf->dot11MeshHWMPmaxPREQretries =
nconf->dot11MeshHWMPmaxPREQretries;
if (_chg_mesh_attr(NL80211_MESHCONF_PATH_REFRESH_TIME, mask))
conf->path_refresh_time = nconf->path_refresh_time;
if (_chg_mesh_attr(NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT, mask))
conf->min_discovery_timeout = nconf->min_discovery_timeout;
if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT, mask))
conf->dot11MeshHWMPactivePathTimeout =
nconf->dot11MeshHWMPactivePathTimeout;
if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL, mask))
conf->dot11MeshHWMPpreqMinInterval =
nconf->dot11MeshHWMPpreqMinInterval;
if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL, mask))
conf->dot11MeshHWMPperrMinInterval =
nconf->dot11MeshHWMPperrMinInterval;
if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
mask))
conf->dot11MeshHWMPnetDiameterTraversalTime =
nconf->dot11MeshHWMPnetDiameterTraversalTime;
if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_ROOTMODE, mask)) {
conf->dot11MeshHWMPRootMode = nconf->dot11MeshHWMPRootMode;
ieee80211_mesh_root_setup(ifmsh);
}
if (_chg_mesh_attr(NL80211_MESHCONF_GATE_ANNOUNCEMENTS, mask)) {
/* our current gate announcement implementation rides on root
* announcements, so require this ifmsh to also be a root node
* */
if (nconf->dot11MeshGateAnnouncementProtocol &&
!(conf->dot11MeshHWMPRootMode > IEEE80211_ROOTMODE_ROOT)) {
conf->dot11MeshHWMPRootMode = IEEE80211_PROACTIVE_RANN;
ieee80211_mesh_root_setup(ifmsh);
}
conf->dot11MeshGateAnnouncementProtocol =
nconf->dot11MeshGateAnnouncementProtocol;
}
if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_RANN_INTERVAL, mask))
conf->dot11MeshHWMPRannInterval =
nconf->dot11MeshHWMPRannInterval;
if (_chg_mesh_attr(NL80211_MESHCONF_FORWARDING, mask))
conf->dot11MeshForwarding = nconf->dot11MeshForwarding;
if (_chg_mesh_attr(NL80211_MESHCONF_RSSI_THRESHOLD, mask)) {
/* our RSSI threshold implementation is supported only for
* devices that report signal in dBm.
*/
if (!ieee80211_hw_check(&sdata->local->hw, SIGNAL_DBM))
return -EOPNOTSUPP;
conf->rssi_threshold = nconf->rssi_threshold;
}
if (_chg_mesh_attr(NL80211_MESHCONF_HT_OPMODE, mask)) {
conf->ht_opmode = nconf->ht_opmode;
sdata->vif.bss_conf.ht_operation_mode = nconf->ht_opmode;
ieee80211_link_info_change_notify(sdata, &sdata->deflink,
BSS_CHANGED_HT);
}
if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT, mask))
conf->dot11MeshHWMPactivePathToRootTimeout =
nconf->dot11MeshHWMPactivePathToRootTimeout;
if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_ROOT_INTERVAL, mask))
conf->dot11MeshHWMProotInterval =
nconf->dot11MeshHWMProotInterval;
if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL, mask))
conf->dot11MeshHWMPconfirmationInterval =
nconf->dot11MeshHWMPconfirmationInterval;
mac80211: mesh power save basics Add routines to - maintain a PS mode for each peer and a non-peer PS mode - indicate own PS mode in transmitted frames - track neighbor STAs power modes - buffer frames when neighbors are in PS mode - add TIM and Awake Window IE to beacons - release frames in Mesh Peer Service Periods Add local_pm to sta_info to represent the link-specific power mode at this station towards the remote station. When a peer link is established, use the default power mode stored in mesh config. Update the PS status if the peering status of a neighbor changes. Maintain a mesh power mode for non-peer mesh STAs. Set the non-peer power mode to active mode during peering. Authenticated mesh peering is currently not working when either node is configured to be in power save mode. Indicate the current power mode in transmitted frames. Use QoS Nulls to indicate mesh power mode transitions. For performance reasons, calls to the function setting the frame flags are placed in HWMP routing routines, as there the STA pointer is already available. Add peer_pm to sta_info to represent the peer's link-specific power mode towards the local station. Add nonpeer_pm to represent the peer's power mode towards all non-peer stations. Track power modes based on received frames. Add the ps_data structure to ieee80211_if_mesh (for TIM map, PS neighbor counter and group-addressed frame buffer). Set WLAN_STA_PS flag for STA in PS mode to use the unicast frame buffering routines in the tx path. Update num_sta_ps to buffer and release group-addressed frames after DTIM beacons. Announce the awake window duration in beacons if in light or deep sleep mode towards any peer or non-peer. Create a TIM IE similarly to AP mode and add it to mesh beacons. Parse received Awake Window IEs and check TIM IEs for buffered frames. Release frames towards peers in mesh Peer Service Periods. Use the corresponding trigger frames and monitor the MPSP status. Append a QoS Null as trigger frame if neccessary to properly end the MPSP. Currently, in HT channels MPSPs behave imperfectly and show large delay spikes and frame losses. Signed-off-by: Marco Porsch <marco@cozybit.com> Signed-off-by: Ivan Bezyazychnyy <ivan.bezyazychnyy@gmail.com> Signed-off-by: Mike Krinkin <krinkin.m.u@gmail.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-30 17:14:08 +00:00
if (_chg_mesh_attr(NL80211_MESHCONF_POWER_MODE, mask)) {
conf->power_mode = nconf->power_mode;
ieee80211_mps_local_status_update(sdata);
}
if (_chg_mesh_attr(NL80211_MESHCONF_AWAKE_WINDOW, mask))
mac80211: mesh power save basics Add routines to - maintain a PS mode for each peer and a non-peer PS mode - indicate own PS mode in transmitted frames - track neighbor STAs power modes - buffer frames when neighbors are in PS mode - add TIM and Awake Window IE to beacons - release frames in Mesh Peer Service Periods Add local_pm to sta_info to represent the link-specific power mode at this station towards the remote station. When a peer link is established, use the default power mode stored in mesh config. Update the PS status if the peering status of a neighbor changes. Maintain a mesh power mode for non-peer mesh STAs. Set the non-peer power mode to active mode during peering. Authenticated mesh peering is currently not working when either node is configured to be in power save mode. Indicate the current power mode in transmitted frames. Use QoS Nulls to indicate mesh power mode transitions. For performance reasons, calls to the function setting the frame flags are placed in HWMP routing routines, as there the STA pointer is already available. Add peer_pm to sta_info to represent the peer's link-specific power mode towards the local station. Add nonpeer_pm to represent the peer's power mode towards all non-peer stations. Track power modes based on received frames. Add the ps_data structure to ieee80211_if_mesh (for TIM map, PS neighbor counter and group-addressed frame buffer). Set WLAN_STA_PS flag for STA in PS mode to use the unicast frame buffering routines in the tx path. Update num_sta_ps to buffer and release group-addressed frames after DTIM beacons. Announce the awake window duration in beacons if in light or deep sleep mode towards any peer or non-peer. Create a TIM IE similarly to AP mode and add it to mesh beacons. Parse received Awake Window IEs and check TIM IEs for buffered frames. Release frames towards peers in mesh Peer Service Periods. Use the corresponding trigger frames and monitor the MPSP status. Append a QoS Null as trigger frame if neccessary to properly end the MPSP. Currently, in HT channels MPSPs behave imperfectly and show large delay spikes and frame losses. Signed-off-by: Marco Porsch <marco@cozybit.com> Signed-off-by: Ivan Bezyazychnyy <ivan.bezyazychnyy@gmail.com> Signed-off-by: Mike Krinkin <krinkin.m.u@gmail.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-30 17:14:08 +00:00
conf->dot11MeshAwakeWindowDuration =
nconf->dot11MeshAwakeWindowDuration;
if (_chg_mesh_attr(NL80211_MESHCONF_PLINK_TIMEOUT, mask))
conf->plink_timeout = nconf->plink_timeout;
if (_chg_mesh_attr(NL80211_MESHCONF_CONNECTED_TO_GATE, mask))
conf->dot11MeshConnectedToMeshGate =
nconf->dot11MeshConnectedToMeshGate;
cfg80211/mac80211: add mesh_param "mesh_nolearn" to skip path discovery Currently, before being able to forward a packet between two 802.11s nodes, both a PLINK handshake is performed upon receiving a beacon and then later a PREQ/PREP exchange for path discovery is performed on demand upon receiving a data frame to forward. When running a mesh protocol on top of an 802.11s interface, like batman-adv, we do not need the multi-hop mesh routing capabilities of 802.11s and usually set mesh_fwding=0. However, even with mesh_fwding=0 the PREQ/PREP path discovery is still performed on demand. Even though in this scenario the next hop PREQ/PREP will determine is always the direct 11s neighbor node. The new mesh_nolearn parameter allows to skip the PREQ/PREP exchange in this scenario, leading to a reduced delay, reduced packet buffering and simplifies HWMP in general. mesh_nolearn is still rather conservative in that if the packet destination is not a direct 11s neighbor, it will fall back to PREQ/PREP path discovery. For normal, multi-hop 802.11s mesh routing it is usually not advisable to enable mesh_nolearn as a transmission to a direct but distant neighbor might be worse than reaching that same node via a more robust / higher throughput etc. multi-hop path. Cc: Sven Eckelmann <sven@narfation.org> Cc: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Linus Lüssing <ll@simonwunderlich.de> Link: https://lore.kernel.org/r/20200617073034.26149-1-linus.luessing@c0d3.blue [fix nl80211 policy to range 0/1 only] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-06-17 07:30:33 +00:00
if (_chg_mesh_attr(NL80211_MESHCONF_NOLEARN, mask))
conf->dot11MeshNolearn = nconf->dot11MeshNolearn;
if (_chg_mesh_attr(NL80211_MESHCONF_CONNECTED_TO_AS, mask))
conf->dot11MeshConnectedToAuthServer =
nconf->dot11MeshConnectedToAuthServer;
ieee80211_mbss_info_change_notify(sdata, BSS_CHANGED_BEACON);
return 0;
}
static int ieee80211_join_mesh(struct wiphy *wiphy, struct net_device *dev,
const struct mesh_config *conf,
const struct mesh_setup *setup)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_chan_req chanreq = { .oper = setup->chandef };
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
int err;
lockdep_assert_wiphy(sdata->local->hw.wiphy);
memcpy(&ifmsh->mshcfg, conf, sizeof(struct mesh_config));
err = copy_mesh_setup(ifmsh, setup);
if (err)
return err;
sdata->control_port_over_nl80211 = setup->control_port_over_nl80211;
/* can mesh use other SMPS modes? */
sdata->deflink.smps_mode = IEEE80211_SMPS_OFF;
sdata->deflink.needed_rx_chains = sdata->local->rx_chains;
err = ieee80211_link_use_channel(&sdata->deflink, &chanreq,
IEEE80211_CHANCTX_SHARED);
if (err)
return err;
return ieee80211_start_mesh(sdata);
}
static int ieee80211_leave_mesh(struct wiphy *wiphy, struct net_device *dev)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
lockdep_assert_wiphy(sdata->local->hw.wiphy);
ieee80211_stop_mesh(sdata);
ieee80211_link_release_channel(&sdata->deflink);
mac80211: mesh: Free ie data when leaving mesh At ieee80211_join_mesh() some ie data could have been allocated (see copy_mesh_setup()) and need to be cleaned up when leaving the mesh. This fixes the following kmemleak report: unreferenced object 0xffff0000116bc600 (size 128): comm "wpa_supplicant", pid 608, jiffies 4294898983 (age 293.484s) hex dump (first 32 bytes): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 0............... 00 0f ac 08 00 00 00 00 c4 65 40 00 00 00 00 00 .........e@..... backtrace: [<00000000bebe439d>] __kmalloc_track_caller+0x1c0/0x330 [<00000000a349dbe1>] kmemdup+0x28/0x50 [<0000000075d69baa>] ieee80211_join_mesh+0x6c/0x3b8 [mac80211] [<00000000683bb98b>] __cfg80211_join_mesh+0x1e8/0x4f0 [cfg80211] [<0000000072cb507f>] nl80211_join_mesh+0x520/0x6b8 [cfg80211] [<0000000077e9bcf9>] genl_family_rcv_msg+0x374/0x680 [<00000000b1bd936d>] genl_rcv_msg+0x78/0x108 [<0000000022c53788>] netlink_rcv_skb+0xb0/0x1c0 [<0000000011af8ec9>] genl_rcv+0x34/0x48 [<0000000069e41f53>] netlink_unicast+0x268/0x2e8 [<00000000a7517316>] netlink_sendmsg+0x320/0x4c0 [<0000000069cba205>] ____sys_sendmsg+0x354/0x3a0 [<00000000e06bab0f>] ___sys_sendmsg+0xd8/0x120 [<0000000037340728>] __sys_sendmsg+0xa4/0xf8 [<000000004fed9776>] __arm64_sys_sendmsg+0x44/0x58 [<000000001c1e5647>] el0_svc_handler+0xd0/0x1a0 Fixes: c80d545da3f7 (mac80211: Let userspace enable and configure vendor specific path selection.) Signed-off-by: Remi Pommarel <repk@triplefau.lt> Link: https://lore.kernel.org/r/20200704135007.27292-1-repk@triplefau.lt Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-04 13:50:07 +00:00
kfree(sdata->u.mesh.ie);
return 0;
}
#endif
static int ieee80211_change_bss(struct wiphy *wiphy,
struct net_device *dev,
struct bss_parameters *params)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_link_data *link;
mac80211: Fix possible sband related NULL pointer de-reference Existing API 'ieee80211_get_sdata_band' returns default 2 GHz band even if the channel context configuration is NULL. This crashes for chipsets which support 5 Ghz alone when it tries to access members of 'sband'. Channel context configuration can be NULL in multivif case and when channel switch is in progress (or) when it fails. Fix this by replacing the API 'ieee80211_get_sdata_band' with 'ieee80211_get_sband' which returns a NULL pointer for sband when the channel configuration is NULL. An example scenario is as below: In multivif mode (AP + STA) with drivers like ath10k, when we do a channel switch in the AP vif (which has a number of clients connected) and a STA vif which is connected to some other AP, when the channel switch in AP vif fails, while the STA vifs tries to connect to the other AP, there is a window where the channel context is NULL/invalid and this results in a crash while the clients connected to the AP vif tries to reconnect and this race is very similar to the one investigated by Michal in https://patchwork.kernel.org/patch/3788161/ and this does happens with hardware that supports 5Ghz alone after long hours of testing with continuous channel switch on the AP vif ieee80211 phy0: channel context reservation cannot be finalized because some interfaces aren't switching wlan0: failed to finalize CSA, disconnecting wlan0-1: deauthenticating from 8c:fd:f0:01:54:9c by local choice (Reason: 3=DEAUTH_LEAVING) WARNING: CPU: 1 PID: 19032 at net/mac80211/ieee80211_i.h:1013 sta_info_alloc+0x374/0x3fc [mac80211] [<bf77272c>] (sta_info_alloc [mac80211]) [<bf78776c>] (ieee80211_add_station [mac80211])) [<bf73cc50>] (nl80211_new_station [cfg80211]) Unable to handle kernel NULL pointer dereference at virtual address 00000014 pgd = d5f4c000 Internal error: Oops: 17 [#1] PREEMPT SMP ARM PC is at sta_info_alloc+0x380/0x3fc [mac80211] LR is at sta_info_alloc+0x37c/0x3fc [mac80211] [<bf772738>] (sta_info_alloc [mac80211]) [<bf78776c>] (ieee80211_add_station [mac80211]) [<bf73cc50>] (nl80211_new_station [cfg80211])) Cc: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-27 07:15:38 +00:00
struct ieee80211_supported_band *sband;
u64 changed = 0;
link = ieee80211_link_or_deflink(sdata, params->link_id, true);
if (IS_ERR(link))
return PTR_ERR(link);
if (!sdata_dereference(link->u.ap.beacon, sdata))
return -ENOENT;
sband = ieee80211_get_link_sband(link);
mac80211: Fix possible sband related NULL pointer de-reference Existing API 'ieee80211_get_sdata_band' returns default 2 GHz band even if the channel context configuration is NULL. This crashes for chipsets which support 5 Ghz alone when it tries to access members of 'sband'. Channel context configuration can be NULL in multivif case and when channel switch is in progress (or) when it fails. Fix this by replacing the API 'ieee80211_get_sdata_band' with 'ieee80211_get_sband' which returns a NULL pointer for sband when the channel configuration is NULL. An example scenario is as below: In multivif mode (AP + STA) with drivers like ath10k, when we do a channel switch in the AP vif (which has a number of clients connected) and a STA vif which is connected to some other AP, when the channel switch in AP vif fails, while the STA vifs tries to connect to the other AP, there is a window where the channel context is NULL/invalid and this results in a crash while the clients connected to the AP vif tries to reconnect and this race is very similar to the one investigated by Michal in https://patchwork.kernel.org/patch/3788161/ and this does happens with hardware that supports 5Ghz alone after long hours of testing with continuous channel switch on the AP vif ieee80211 phy0: channel context reservation cannot be finalized because some interfaces aren't switching wlan0: failed to finalize CSA, disconnecting wlan0-1: deauthenticating from 8c:fd:f0:01:54:9c by local choice (Reason: 3=DEAUTH_LEAVING) WARNING: CPU: 1 PID: 19032 at net/mac80211/ieee80211_i.h:1013 sta_info_alloc+0x374/0x3fc [mac80211] [<bf77272c>] (sta_info_alloc [mac80211]) [<bf78776c>] (ieee80211_add_station [mac80211])) [<bf73cc50>] (nl80211_new_station [cfg80211]) Unable to handle kernel NULL pointer dereference at virtual address 00000014 pgd = d5f4c000 Internal error: Oops: 17 [#1] PREEMPT SMP ARM PC is at sta_info_alloc+0x380/0x3fc [mac80211] LR is at sta_info_alloc+0x37c/0x3fc [mac80211] [<bf772738>] (sta_info_alloc [mac80211]) [<bf78776c>] (ieee80211_add_station [mac80211]) [<bf73cc50>] (nl80211_new_station [cfg80211])) Cc: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-27 07:15:38 +00:00
if (!sband)
return -EINVAL;
if (params->basic_rates) {
if (!ieee80211_parse_bitrates(link->conf->chanreq.oper.width,
wiphy->bands[sband->band],
params->basic_rates,
params->basic_rates_len,
&link->conf->basic_rates))
return -EINVAL;
changed |= BSS_CHANGED_BASIC_RATES;
ieee80211_check_rate_mask(link);
}
if (params->use_cts_prot >= 0) {
link->conf->use_cts_prot = params->use_cts_prot;
changed |= BSS_CHANGED_ERP_CTS_PROT;
}
if (params->use_short_preamble >= 0) {
link->conf->use_short_preamble = params->use_short_preamble;
changed |= BSS_CHANGED_ERP_PREAMBLE;
}
if (!link->conf->use_short_slot &&
(sband->band == NL80211_BAND_5GHZ ||
sband->band == NL80211_BAND_6GHZ)) {
link->conf->use_short_slot = true;
changed |= BSS_CHANGED_ERP_SLOT;
}
if (params->use_short_slot_time >= 0) {
link->conf->use_short_slot = params->use_short_slot_time;
changed |= BSS_CHANGED_ERP_SLOT;
}
if (params->ap_isolate >= 0) {
if (params->ap_isolate)
sdata->flags |= IEEE80211_SDATA_DONT_BRIDGE_PACKETS;
else
sdata->flags &= ~IEEE80211_SDATA_DONT_BRIDGE_PACKETS;
mac80211: add fast-rx path The regular RX path has a lot of code, but with a few assumptions on the hardware it's possible to reduce the amount of code significantly. Currently the assumptions on the driver are the following: * hardware/driver reordering buffer (if supporting aggregation) * hardware/driver decryption & PN checking (if using encryption) * hardware/driver did de-duplication * hardware/driver did A-MSDU deaggregation * AP_LINK_PS is used (in AP mode) * no client powersave handling in mac80211 (in client mode) of which some are actually checked per packet: * de-duplication * PN checking * decryption and additionally packets must * not be A-MSDU (have been deaggregated by driver/device) * be data packets * not be fragmented * be unicast * have RFC 1042 header Additionally dynamically we assume: * no encryption or CCMP/GCMP, TKIP/WEP/other not allowed * station must be authorized * 4-addr format not enabled Some data needed for the RX path is cached in a new per-station "fast_rx" structure, so that we only need to look at this and the packet, no other memory when processing packets on the fast RX path. After doing the above per-packet checks, the data path collapses down to a pretty simple conversion function taking advantage of the data cached in the small fast_rx struct. This should speed up the RX processing, and will make it easier to reason about parallelizing RX (for which statistics will need to be per-CPU still.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-03-31 17:02:10 +00:00
ieee80211_check_fast_rx_iface(sdata);
}
if (params->ht_opmode >= 0) {
link->conf->ht_operation_mode = (u16)params->ht_opmode;
changed |= BSS_CHANGED_HT;
}
if (params->p2p_ctwindow >= 0) {
link->conf->p2p_noa_attr.oppps_ctwindow &=
~IEEE80211_P2P_OPPPS_CTWINDOW_MASK;
link->conf->p2p_noa_attr.oppps_ctwindow |=
params->p2p_ctwindow & IEEE80211_P2P_OPPPS_CTWINDOW_MASK;
changed |= BSS_CHANGED_P2P_PS;
}
if (params->p2p_opp_ps > 0) {
link->conf->p2p_noa_attr.oppps_ctwindow |=
IEEE80211_P2P_OPPPS_ENABLE_BIT;
changed |= BSS_CHANGED_P2P_PS;
} else if (params->p2p_opp_ps == 0) {
link->conf->p2p_noa_attr.oppps_ctwindow &=
~IEEE80211_P2P_OPPPS_ENABLE_BIT;
changed |= BSS_CHANGED_P2P_PS;
}
ieee80211_link_info_change_notify(sdata, link, changed);
return 0;
}
static int ieee80211_set_txq_params(struct wiphy *wiphy,
struct net_device *dev,
struct ieee80211_txq_params *params)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_link_data *link =
ieee80211_link_or_deflink(sdata, params->link_id, true);
struct ieee80211_tx_queue_params p;
if (!local->ops->conf_tx)
return -EOPNOTSUPP;
if (local->hw.queues < IEEE80211_NUM_ACS)
return -EOPNOTSUPP;
if (IS_ERR(link))
return PTR_ERR(link);
memset(&p, 0, sizeof(p));
p.aifs = params->aifs;
p.cw_max = params->cwmax;
p.cw_min = params->cwmin;
p.txop = params->txop;
/*
* Setting tx queue params disables u-apsd because it's only
* called in master mode.
*/
p.uapsd = false;
ieee80211_regulatory_limit_wmm_params(sdata, &p, params->ac);
link->tx_conf[params->ac] = p;
if (drv_conf_tx(local, link, params->ac, &p)) {
wiphy_debug(local->hw.wiphy,
"failed to set TX queue parameters for AC %d\n",
params->ac);
return -EINVAL;
}
ieee80211_link_info_change_notify(sdata, link,
BSS_CHANGED_QOS);
return 0;
}
#ifdef CONFIG_PM
static int ieee80211_suspend(struct wiphy *wiphy,
struct cfg80211_wowlan *wowlan)
{
return __ieee80211_suspend(wiphy_priv(wiphy), wowlan);
}
static int ieee80211_resume(struct wiphy *wiphy)
{
return __ieee80211_resume(wiphy_priv(wiphy));
}
#else
#define ieee80211_suspend NULL
#define ieee80211_resume NULL
#endif
static int ieee80211_scan(struct wiphy *wiphy,
struct cfg80211_scan_request *req)
{
struct ieee80211_sub_if_data *sdata;
sdata = IEEE80211_WDEV_TO_SUB_IF(req->wdev);
switch (ieee80211_vif_type_p2p(&sdata->vif)) {
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_MESH_POINT:
case NL80211_IFTYPE_P2P_CLIENT:
case NL80211_IFTYPE_P2P_DEVICE:
break;
case NL80211_IFTYPE_P2P_GO:
if (sdata->local->ops->hw_scan)
break;
/*
* FIXME: implement NoA while scanning in software,
* for now fall through to allow scanning only when
* beaconing hasn't been configured yet
*/
fallthrough;
case NL80211_IFTYPE_AP:
/*
* If the scan has been forced (and the driver supports
* forcing), don't care about being beaconing already.
* This will create problems to the attached stations (e.g. all
* the frames sent while scanning on other channel will be
* lost)
*/
if (sdata->deflink.u.ap.beacon &&
(!(wiphy->features & NL80211_FEATURE_AP_SCAN) ||
!(req->flags & NL80211_SCAN_FLAG_AP)))
return -EOPNOTSUPP;
break;
case NL80211_IFTYPE_NAN:
default:
return -EOPNOTSUPP;
}
return ieee80211_request_scan(sdata, req);
}
static void ieee80211_abort_scan(struct wiphy *wiphy, struct wireless_dev *wdev)
{
ieee80211_scan_cancel(wiphy_priv(wiphy));
}
static int
ieee80211_sched_scan_start(struct wiphy *wiphy,
struct net_device *dev,
struct cfg80211_sched_scan_request *req)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (!sdata->local->ops->sched_scan_start)
return -EOPNOTSUPP;
return ieee80211_request_sched_scan_start(sdata, req);
}
static int
ieee80211_sched_scan_stop(struct wiphy *wiphy, struct net_device *dev,
u64 reqid)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
if (!local->ops->sched_scan_stop)
return -EOPNOTSUPP;
return ieee80211_request_sched_scan_stop(local);
}
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
static int ieee80211_auth(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_auth_request *req)
{
return ieee80211_mgd_auth(IEEE80211_DEV_TO_SUB_IF(dev), req);
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
}
static int ieee80211_assoc(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_assoc_request *req)
{
return ieee80211_mgd_assoc(IEEE80211_DEV_TO_SUB_IF(dev), req);
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
}
static int ieee80211_deauth(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_deauth_request *req)
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
{
return ieee80211_mgd_deauth(IEEE80211_DEV_TO_SUB_IF(dev), req);
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
}
static int ieee80211_disassoc(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_disassoc_request *req)
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
{
return ieee80211_mgd_disassoc(IEEE80211_DEV_TO_SUB_IF(dev), req);
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
}
static int ieee80211_join_ibss(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_ibss_params *params)
{
return ieee80211_ibss_join(IEEE80211_DEV_TO_SUB_IF(dev), params);
}
static int ieee80211_leave_ibss(struct wiphy *wiphy, struct net_device *dev)
{
return ieee80211_ibss_leave(IEEE80211_DEV_TO_SUB_IF(dev));
}
static int ieee80211_join_ocb(struct wiphy *wiphy, struct net_device *dev,
struct ocb_setup *setup)
{
return ieee80211_ocb_join(IEEE80211_DEV_TO_SUB_IF(dev), setup);
}
static int ieee80211_leave_ocb(struct wiphy *wiphy, struct net_device *dev)
{
return ieee80211_ocb_leave(IEEE80211_DEV_TO_SUB_IF(dev));
}
static int ieee80211_set_mcast_rate(struct wiphy *wiphy, struct net_device *dev,
int rate[NUM_NL80211_BANDS])
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
memcpy(sdata->vif.bss_conf.mcast_rate, rate,
sizeof(int) * NUM_NL80211_BANDS);
ieee80211_link_info_change_notify(sdata, &sdata->deflink,
BSS_CHANGED_MCAST_RATE);
return 0;
}
static int ieee80211_set_wiphy_params(struct wiphy *wiphy, u32 changed)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
int err;
if (changed & WIPHY_PARAM_FRAG_THRESHOLD) {
ieee80211_check_fast_xmit_all(local);
err = drv_set_frag_threshold(local, wiphy->frag_threshold);
if (err) {
ieee80211_check_fast_xmit_all(local);
return err;
}
}
if ((changed & WIPHY_PARAM_COVERAGE_CLASS) ||
(changed & WIPHY_PARAM_DYN_ACK)) {
s16 coverage_class;
coverage_class = changed & WIPHY_PARAM_COVERAGE_CLASS ?
wiphy->coverage_class : -1;
err = drv_set_coverage_class(local, coverage_class);
if (err)
return err;
}
if (changed & WIPHY_PARAM_RTS_THRESHOLD) {
err = drv_set_rts_threshold(local, wiphy->rts_threshold);
if (err)
return err;
}
if (changed & WIPHY_PARAM_RETRY_SHORT) {
if (wiphy->retry_short > IEEE80211_MAX_TX_RETRY)
return -EINVAL;
local->hw.conf.short_frame_max_tx_count = wiphy->retry_short;
}
if (changed & WIPHY_PARAM_RETRY_LONG) {
if (wiphy->retry_long > IEEE80211_MAX_TX_RETRY)
return -EINVAL;
local->hw.conf.long_frame_max_tx_count = wiphy->retry_long;
}
if (changed &
(WIPHY_PARAM_RETRY_SHORT | WIPHY_PARAM_RETRY_LONG))
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_RETRY_LIMITS);
if (changed & (WIPHY_PARAM_TXQ_LIMIT |
WIPHY_PARAM_TXQ_MEMORY_LIMIT |
WIPHY_PARAM_TXQ_QUANTUM))
ieee80211_txq_set_params(local);
return 0;
}
static int ieee80211_set_tx_power(struct wiphy *wiphy,
struct wireless_dev *wdev,
enum nl80211_tx_power_setting type, int mbm)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
struct ieee80211_sub_if_data *sdata;
enum nl80211_tx_power_setting txp_type = type;
bool update_txp_type = false;
mac80211: Fix setting TX power on monitor interfaces Instead of calling ieee80211_recalc_txpower on monitor interfaces directly, call it using the virtual monitor interface, if one exists. In case of a single monitor interface given, reject setting TX power, if no virtual monitor interface exists. That being checked, don't warn in ieee80211_bss_info_change_notify, after setting TX power on a monitor interface. Fixes warning: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2193 at net/mac80211/driver-ops.h:167 ieee80211_bss_info_change_notify+0x111/0x190 Modules linked in: uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core rndis_host cdc_ether usbnet mii tp_smapi(O) thinkpad_ec(O) ohci_hcd vboxpci(O) vboxnetadp(O) vboxnetflt(O) v boxdrv(O) x86_pkg_temp_thermal kvm_intel kvm irqbypass iwldvm iwlwifi ehci_pci ehci_hcd tpm_tis tpm_tis_core tpm CPU: 0 PID: 2193 Comm: iw Tainted: G O 4.12.12-gentoo #2 task: ffff880186fd5cc0 task.stack: ffffc90001b54000 RIP: 0010:ieee80211_bss_info_change_notify+0x111/0x190 RSP: 0018:ffffc90001b57a10 EFLAGS: 00010246 RAX: 0000000000000006 RBX: ffff8801052ce840 RCX: 0000000000000064 RDX: 00000000fffffffc RSI: 0000000000040000 RDI: ffff8801052ce840 RBP: ffffc90001b57a38 R08: 0000000000000062 R09: 0000000000000000 R10: ffff8802144b5000 R11: ffff880049dc4614 R12: 0000000000040000 R13: 0000000000000064 R14: ffff8802105f0760 R15: ffffc90001b57b48 FS: 00007f92644b4580(0000) GS:ffff88021e200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f9263c109f0 CR3: 00000001df850000 CR4: 00000000000406f0 Call Trace: ieee80211_recalc_txpower+0x33/0x40 ieee80211_set_tx_power+0x40/0x180 nl80211_set_wiphy+0x32e/0x950 Reported-by: Peter Große <pegro@friiks.de> Signed-off-by: Peter Große <pegro@friiks.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-12-13 17:29:46 +00:00
bool has_monitor = false;
lockdep_assert_wiphy(local->hw.wiphy);
if (wdev) {
sdata = IEEE80211_WDEV_TO_SUB_IF(wdev);
mac80211: Fix setting TX power on monitor interfaces Instead of calling ieee80211_recalc_txpower on monitor interfaces directly, call it using the virtual monitor interface, if one exists. In case of a single monitor interface given, reject setting TX power, if no virtual monitor interface exists. That being checked, don't warn in ieee80211_bss_info_change_notify, after setting TX power on a monitor interface. Fixes warning: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2193 at net/mac80211/driver-ops.h:167 ieee80211_bss_info_change_notify+0x111/0x190 Modules linked in: uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core rndis_host cdc_ether usbnet mii tp_smapi(O) thinkpad_ec(O) ohci_hcd vboxpci(O) vboxnetadp(O) vboxnetflt(O) v boxdrv(O) x86_pkg_temp_thermal kvm_intel kvm irqbypass iwldvm iwlwifi ehci_pci ehci_hcd tpm_tis tpm_tis_core tpm CPU: 0 PID: 2193 Comm: iw Tainted: G O 4.12.12-gentoo #2 task: ffff880186fd5cc0 task.stack: ffffc90001b54000 RIP: 0010:ieee80211_bss_info_change_notify+0x111/0x190 RSP: 0018:ffffc90001b57a10 EFLAGS: 00010246 RAX: 0000000000000006 RBX: ffff8801052ce840 RCX: 0000000000000064 RDX: 00000000fffffffc RSI: 0000000000040000 RDI: ffff8801052ce840 RBP: ffffc90001b57a38 R08: 0000000000000062 R09: 0000000000000000 R10: ffff8802144b5000 R11: ffff880049dc4614 R12: 0000000000040000 R13: 0000000000000064 R14: ffff8802105f0760 R15: ffffc90001b57b48 FS: 00007f92644b4580(0000) GS:ffff88021e200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f9263c109f0 CR3: 00000001df850000 CR4: 00000000000406f0 Call Trace: ieee80211_recalc_txpower+0x33/0x40 ieee80211_set_tx_power+0x40/0x180 nl80211_set_wiphy+0x32e/0x950 Reported-by: Peter Große <pegro@friiks.de> Signed-off-by: Peter Große <pegro@friiks.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-12-13 17:29:46 +00:00
if (sdata->vif.type == NL80211_IFTYPE_MONITOR) {
sdata = wiphy_dereference(local->hw.wiphy,
local->monitor_sdata);
mac80211: Fix setting TX power on monitor interfaces Instead of calling ieee80211_recalc_txpower on monitor interfaces directly, call it using the virtual monitor interface, if one exists. In case of a single monitor interface given, reject setting TX power, if no virtual monitor interface exists. That being checked, don't warn in ieee80211_bss_info_change_notify, after setting TX power on a monitor interface. Fixes warning: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2193 at net/mac80211/driver-ops.h:167 ieee80211_bss_info_change_notify+0x111/0x190 Modules linked in: uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core rndis_host cdc_ether usbnet mii tp_smapi(O) thinkpad_ec(O) ohci_hcd vboxpci(O) vboxnetadp(O) vboxnetflt(O) v boxdrv(O) x86_pkg_temp_thermal kvm_intel kvm irqbypass iwldvm iwlwifi ehci_pci ehci_hcd tpm_tis tpm_tis_core tpm CPU: 0 PID: 2193 Comm: iw Tainted: G O 4.12.12-gentoo #2 task: ffff880186fd5cc0 task.stack: ffffc90001b54000 RIP: 0010:ieee80211_bss_info_change_notify+0x111/0x190 RSP: 0018:ffffc90001b57a10 EFLAGS: 00010246 RAX: 0000000000000006 RBX: ffff8801052ce840 RCX: 0000000000000064 RDX: 00000000fffffffc RSI: 0000000000040000 RDI: ffff8801052ce840 RBP: ffffc90001b57a38 R08: 0000000000000062 R09: 0000000000000000 R10: ffff8802144b5000 R11: ffff880049dc4614 R12: 0000000000040000 R13: 0000000000000064 R14: ffff8802105f0760 R15: ffffc90001b57b48 FS: 00007f92644b4580(0000) GS:ffff88021e200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f9263c109f0 CR3: 00000001df850000 CR4: 00000000000406f0 Call Trace: ieee80211_recalc_txpower+0x33/0x40 ieee80211_set_tx_power+0x40/0x180 nl80211_set_wiphy+0x32e/0x950 Reported-by: Peter Große <pegro@friiks.de> Signed-off-by: Peter Große <pegro@friiks.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-12-13 17:29:46 +00:00
if (!sdata)
return -EOPNOTSUPP;
}
switch (type) {
case NL80211_TX_POWER_AUTOMATIC:
sdata->deflink.user_power_level =
IEEE80211_UNSET_POWER_LEVEL;
txp_type = NL80211_TX_POWER_LIMITED;
break;
case NL80211_TX_POWER_LIMITED:
case NL80211_TX_POWER_FIXED:
if (mbm < 0 || (mbm % 100))
return -EOPNOTSUPP;
sdata->deflink.user_power_level = MBM_TO_DBM(mbm);
break;
}
if (txp_type != sdata->vif.bss_conf.txpower_type) {
update_txp_type = true;
sdata->vif.bss_conf.txpower_type = txp_type;
}
ieee80211_recalc_txpower(sdata, update_txp_type);
return 0;
}
switch (type) {
case NL80211_TX_POWER_AUTOMATIC:
local->user_power_level = IEEE80211_UNSET_POWER_LEVEL;
txp_type = NL80211_TX_POWER_LIMITED;
break;
case NL80211_TX_POWER_LIMITED:
case NL80211_TX_POWER_FIXED:
if (mbm < 0 || (mbm % 100))
return -EOPNOTSUPP;
local->user_power_level = MBM_TO_DBM(mbm);
break;
}
list_for_each_entry(sdata, &local->interfaces, list) {
mac80211: Fix setting TX power on monitor interfaces Instead of calling ieee80211_recalc_txpower on monitor interfaces directly, call it using the virtual monitor interface, if one exists. In case of a single monitor interface given, reject setting TX power, if no virtual monitor interface exists. That being checked, don't warn in ieee80211_bss_info_change_notify, after setting TX power on a monitor interface. Fixes warning: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2193 at net/mac80211/driver-ops.h:167 ieee80211_bss_info_change_notify+0x111/0x190 Modules linked in: uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core rndis_host cdc_ether usbnet mii tp_smapi(O) thinkpad_ec(O) ohci_hcd vboxpci(O) vboxnetadp(O) vboxnetflt(O) v boxdrv(O) x86_pkg_temp_thermal kvm_intel kvm irqbypass iwldvm iwlwifi ehci_pci ehci_hcd tpm_tis tpm_tis_core tpm CPU: 0 PID: 2193 Comm: iw Tainted: G O 4.12.12-gentoo #2 task: ffff880186fd5cc0 task.stack: ffffc90001b54000 RIP: 0010:ieee80211_bss_info_change_notify+0x111/0x190 RSP: 0018:ffffc90001b57a10 EFLAGS: 00010246 RAX: 0000000000000006 RBX: ffff8801052ce840 RCX: 0000000000000064 RDX: 00000000fffffffc RSI: 0000000000040000 RDI: ffff8801052ce840 RBP: ffffc90001b57a38 R08: 0000000000000062 R09: 0000000000000000 R10: ffff8802144b5000 R11: ffff880049dc4614 R12: 0000000000040000 R13: 0000000000000064 R14: ffff8802105f0760 R15: ffffc90001b57b48 FS: 00007f92644b4580(0000) GS:ffff88021e200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f9263c109f0 CR3: 00000001df850000 CR4: 00000000000406f0 Call Trace: ieee80211_recalc_txpower+0x33/0x40 ieee80211_set_tx_power+0x40/0x180 nl80211_set_wiphy+0x32e/0x950 Reported-by: Peter Große <pegro@friiks.de> Signed-off-by: Peter Große <pegro@friiks.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-12-13 17:29:46 +00:00
if (sdata->vif.type == NL80211_IFTYPE_MONITOR) {
has_monitor = true;
continue;
}
sdata->deflink.user_power_level = local->user_power_level;
if (txp_type != sdata->vif.bss_conf.txpower_type)
update_txp_type = true;
sdata->vif.bss_conf.txpower_type = txp_type;
}
mac80211: Fix setting TX power on monitor interfaces Instead of calling ieee80211_recalc_txpower on monitor interfaces directly, call it using the virtual monitor interface, if one exists. In case of a single monitor interface given, reject setting TX power, if no virtual monitor interface exists. That being checked, don't warn in ieee80211_bss_info_change_notify, after setting TX power on a monitor interface. Fixes warning: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2193 at net/mac80211/driver-ops.h:167 ieee80211_bss_info_change_notify+0x111/0x190 Modules linked in: uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core rndis_host cdc_ether usbnet mii tp_smapi(O) thinkpad_ec(O) ohci_hcd vboxpci(O) vboxnetadp(O) vboxnetflt(O) v boxdrv(O) x86_pkg_temp_thermal kvm_intel kvm irqbypass iwldvm iwlwifi ehci_pci ehci_hcd tpm_tis tpm_tis_core tpm CPU: 0 PID: 2193 Comm: iw Tainted: G O 4.12.12-gentoo #2 task: ffff880186fd5cc0 task.stack: ffffc90001b54000 RIP: 0010:ieee80211_bss_info_change_notify+0x111/0x190 RSP: 0018:ffffc90001b57a10 EFLAGS: 00010246 RAX: 0000000000000006 RBX: ffff8801052ce840 RCX: 0000000000000064 RDX: 00000000fffffffc RSI: 0000000000040000 RDI: ffff8801052ce840 RBP: ffffc90001b57a38 R08: 0000000000000062 R09: 0000000000000000 R10: ffff8802144b5000 R11: ffff880049dc4614 R12: 0000000000040000 R13: 0000000000000064 R14: ffff8802105f0760 R15: ffffc90001b57b48 FS: 00007f92644b4580(0000) GS:ffff88021e200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f9263c109f0 CR3: 00000001df850000 CR4: 00000000000406f0 Call Trace: ieee80211_recalc_txpower+0x33/0x40 ieee80211_set_tx_power+0x40/0x180 nl80211_set_wiphy+0x32e/0x950 Reported-by: Peter Große <pegro@friiks.de> Signed-off-by: Peter Große <pegro@friiks.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-12-13 17:29:46 +00:00
list_for_each_entry(sdata, &local->interfaces, list) {
if (sdata->vif.type == NL80211_IFTYPE_MONITOR)
continue;
ieee80211_recalc_txpower(sdata, update_txp_type);
mac80211: Fix setting TX power on monitor interfaces Instead of calling ieee80211_recalc_txpower on monitor interfaces directly, call it using the virtual monitor interface, if one exists. In case of a single monitor interface given, reject setting TX power, if no virtual monitor interface exists. That being checked, don't warn in ieee80211_bss_info_change_notify, after setting TX power on a monitor interface. Fixes warning: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2193 at net/mac80211/driver-ops.h:167 ieee80211_bss_info_change_notify+0x111/0x190 Modules linked in: uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core rndis_host cdc_ether usbnet mii tp_smapi(O) thinkpad_ec(O) ohci_hcd vboxpci(O) vboxnetadp(O) vboxnetflt(O) v boxdrv(O) x86_pkg_temp_thermal kvm_intel kvm irqbypass iwldvm iwlwifi ehci_pci ehci_hcd tpm_tis tpm_tis_core tpm CPU: 0 PID: 2193 Comm: iw Tainted: G O 4.12.12-gentoo #2 task: ffff880186fd5cc0 task.stack: ffffc90001b54000 RIP: 0010:ieee80211_bss_info_change_notify+0x111/0x190 RSP: 0018:ffffc90001b57a10 EFLAGS: 00010246 RAX: 0000000000000006 RBX: ffff8801052ce840 RCX: 0000000000000064 RDX: 00000000fffffffc RSI: 0000000000040000 RDI: ffff8801052ce840 RBP: ffffc90001b57a38 R08: 0000000000000062 R09: 0000000000000000 R10: ffff8802144b5000 R11: ffff880049dc4614 R12: 0000000000040000 R13: 0000000000000064 R14: ffff8802105f0760 R15: ffffc90001b57b48 FS: 00007f92644b4580(0000) GS:ffff88021e200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f9263c109f0 CR3: 00000001df850000 CR4: 00000000000406f0 Call Trace: ieee80211_recalc_txpower+0x33/0x40 ieee80211_set_tx_power+0x40/0x180 nl80211_set_wiphy+0x32e/0x950 Reported-by: Peter Große <pegro@friiks.de> Signed-off-by: Peter Große <pegro@friiks.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-12-13 17:29:46 +00:00
}
mac80211: Fix setting TX power on monitor interfaces Instead of calling ieee80211_recalc_txpower on monitor interfaces directly, call it using the virtual monitor interface, if one exists. In case of a single monitor interface given, reject setting TX power, if no virtual monitor interface exists. That being checked, don't warn in ieee80211_bss_info_change_notify, after setting TX power on a monitor interface. Fixes warning: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2193 at net/mac80211/driver-ops.h:167 ieee80211_bss_info_change_notify+0x111/0x190 Modules linked in: uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core rndis_host cdc_ether usbnet mii tp_smapi(O) thinkpad_ec(O) ohci_hcd vboxpci(O) vboxnetadp(O) vboxnetflt(O) v boxdrv(O) x86_pkg_temp_thermal kvm_intel kvm irqbypass iwldvm iwlwifi ehci_pci ehci_hcd tpm_tis tpm_tis_core tpm CPU: 0 PID: 2193 Comm: iw Tainted: G O 4.12.12-gentoo #2 task: ffff880186fd5cc0 task.stack: ffffc90001b54000 RIP: 0010:ieee80211_bss_info_change_notify+0x111/0x190 RSP: 0018:ffffc90001b57a10 EFLAGS: 00010246 RAX: 0000000000000006 RBX: ffff8801052ce840 RCX: 0000000000000064 RDX: 00000000fffffffc RSI: 0000000000040000 RDI: ffff8801052ce840 RBP: ffffc90001b57a38 R08: 0000000000000062 R09: 0000000000000000 R10: ffff8802144b5000 R11: ffff880049dc4614 R12: 0000000000040000 R13: 0000000000000064 R14: ffff8802105f0760 R15: ffffc90001b57b48 FS: 00007f92644b4580(0000) GS:ffff88021e200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f9263c109f0 CR3: 00000001df850000 CR4: 00000000000406f0 Call Trace: ieee80211_recalc_txpower+0x33/0x40 ieee80211_set_tx_power+0x40/0x180 nl80211_set_wiphy+0x32e/0x950 Reported-by: Peter Große <pegro@friiks.de> Signed-off-by: Peter Große <pegro@friiks.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-12-13 17:29:46 +00:00
if (has_monitor) {
sdata = wiphy_dereference(local->hw.wiphy,
local->monitor_sdata);
mac80211: Fix setting TX power on monitor interfaces Instead of calling ieee80211_recalc_txpower on monitor interfaces directly, call it using the virtual monitor interface, if one exists. In case of a single monitor interface given, reject setting TX power, if no virtual monitor interface exists. That being checked, don't warn in ieee80211_bss_info_change_notify, after setting TX power on a monitor interface. Fixes warning: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2193 at net/mac80211/driver-ops.h:167 ieee80211_bss_info_change_notify+0x111/0x190 Modules linked in: uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core rndis_host cdc_ether usbnet mii tp_smapi(O) thinkpad_ec(O) ohci_hcd vboxpci(O) vboxnetadp(O) vboxnetflt(O) v boxdrv(O) x86_pkg_temp_thermal kvm_intel kvm irqbypass iwldvm iwlwifi ehci_pci ehci_hcd tpm_tis tpm_tis_core tpm CPU: 0 PID: 2193 Comm: iw Tainted: G O 4.12.12-gentoo #2 task: ffff880186fd5cc0 task.stack: ffffc90001b54000 RIP: 0010:ieee80211_bss_info_change_notify+0x111/0x190 RSP: 0018:ffffc90001b57a10 EFLAGS: 00010246 RAX: 0000000000000006 RBX: ffff8801052ce840 RCX: 0000000000000064 RDX: 00000000fffffffc RSI: 0000000000040000 RDI: ffff8801052ce840 RBP: ffffc90001b57a38 R08: 0000000000000062 R09: 0000000000000000 R10: ffff8802144b5000 R11: ffff880049dc4614 R12: 0000000000040000 R13: 0000000000000064 R14: ffff8802105f0760 R15: ffffc90001b57b48 FS: 00007f92644b4580(0000) GS:ffff88021e200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f9263c109f0 CR3: 00000001df850000 CR4: 00000000000406f0 Call Trace: ieee80211_recalc_txpower+0x33/0x40 ieee80211_set_tx_power+0x40/0x180 nl80211_set_wiphy+0x32e/0x950 Reported-by: Peter Große <pegro@friiks.de> Signed-off-by: Peter Große <pegro@friiks.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-12-13 17:29:46 +00:00
if (sdata) {
sdata->deflink.user_power_level = local->user_power_level;
mac80211: Fix setting TX power on monitor interfaces Instead of calling ieee80211_recalc_txpower on monitor interfaces directly, call it using the virtual monitor interface, if one exists. In case of a single monitor interface given, reject setting TX power, if no virtual monitor interface exists. That being checked, don't warn in ieee80211_bss_info_change_notify, after setting TX power on a monitor interface. Fixes warning: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2193 at net/mac80211/driver-ops.h:167 ieee80211_bss_info_change_notify+0x111/0x190 Modules linked in: uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core rndis_host cdc_ether usbnet mii tp_smapi(O) thinkpad_ec(O) ohci_hcd vboxpci(O) vboxnetadp(O) vboxnetflt(O) v boxdrv(O) x86_pkg_temp_thermal kvm_intel kvm irqbypass iwldvm iwlwifi ehci_pci ehci_hcd tpm_tis tpm_tis_core tpm CPU: 0 PID: 2193 Comm: iw Tainted: G O 4.12.12-gentoo #2 task: ffff880186fd5cc0 task.stack: ffffc90001b54000 RIP: 0010:ieee80211_bss_info_change_notify+0x111/0x190 RSP: 0018:ffffc90001b57a10 EFLAGS: 00010246 RAX: 0000000000000006 RBX: ffff8801052ce840 RCX: 0000000000000064 RDX: 00000000fffffffc RSI: 0000000000040000 RDI: ffff8801052ce840 RBP: ffffc90001b57a38 R08: 0000000000000062 R09: 0000000000000000 R10: ffff8802144b5000 R11: ffff880049dc4614 R12: 0000000000040000 R13: 0000000000000064 R14: ffff8802105f0760 R15: ffffc90001b57b48 FS: 00007f92644b4580(0000) GS:ffff88021e200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f9263c109f0 CR3: 00000001df850000 CR4: 00000000000406f0 Call Trace: ieee80211_recalc_txpower+0x33/0x40 ieee80211_set_tx_power+0x40/0x180 nl80211_set_wiphy+0x32e/0x950 Reported-by: Peter Große <pegro@friiks.de> Signed-off-by: Peter Große <pegro@friiks.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-12-13 17:29:46 +00:00
if (txp_type != sdata->vif.bss_conf.txpower_type)
update_txp_type = true;
sdata->vif.bss_conf.txpower_type = txp_type;
ieee80211_recalc_txpower(sdata, update_txp_type);
}
}
return 0;
}
static int ieee80211_get_tx_power(struct wiphy *wiphy,
struct wireless_dev *wdev,
int *dbm)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev);
if (local->ops->get_txpower)
return drv_get_txpower(local, sdata, dbm);
if (local->emulate_chanctx)
*dbm = local->hw.conf.power_level;
else
*dbm = sdata->vif.bss_conf.txpower;
/* INT_MIN indicates no power level was set yet */
if (*dbm == INT_MIN)
return -EINVAL;
return 0;
}
static void ieee80211_rfkill_poll(struct wiphy *wiphy)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
drv_rfkill_poll(local);
}
#ifdef CONFIG_NL80211_TESTMODE
static int ieee80211_testmode_cmd(struct wiphy *wiphy,
struct wireless_dev *wdev,
void *data, int len)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
struct ieee80211_vif *vif = NULL;
if (!local->ops->testmode_cmd)
return -EOPNOTSUPP;
if (wdev) {
struct ieee80211_sub_if_data *sdata;
sdata = IEEE80211_WDEV_TO_SUB_IF(wdev);
if (sdata->flags & IEEE80211_SDATA_IN_DRIVER)
vif = &sdata->vif;
}
return local->ops->testmode_cmd(&local->hw, vif, data, len);
}
static int ieee80211_testmode_dump(struct wiphy *wiphy,
struct sk_buff *skb,
struct netlink_callback *cb,
void *data, int len)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
if (!local->ops->testmode_dump)
return -EOPNOTSUPP;
return local->ops->testmode_dump(&local->hw, skb, cb, data, len);
}
#endif
int __ieee80211_request_smps_mgd(struct ieee80211_sub_if_data *sdata,
struct ieee80211_link_data *link,
enum ieee80211_smps_mode smps_mode)
{
const u8 *ap;
enum ieee80211_smps_mode old_req;
int err;
struct sta_info *sta;
bool tdls_peer_found = false;
lockdep_assert_wiphy(sdata->local->hw.wiphy);
if (WARN_ON_ONCE(sdata->vif.type != NL80211_IFTYPE_STATION))
return -EINVAL;
if (!ieee80211_vif_link_active(&sdata->vif, link->link_id))
return 0;
old_req = link->u.mgd.req_smps;
link->u.mgd.req_smps = smps_mode;
/* The driver indicated that EML is enabled for the interface, which
* implies that SMPS flows towards the AP should be stopped.
*/
if (sdata->vif.driver_flags & IEEE80211_VIF_EML_ACTIVE)
return 0;
if (old_req == smps_mode &&
smps_mode != IEEE80211_SMPS_AUTOMATIC)
return 0;
/*
* If not associated, or current association is not an HT
* association, there's no need to do anything, just store
* the new value until we associate.
*/
if (!sdata->u.mgd.associated ||
link->conf->chanreq.oper.width == NL80211_CHAN_WIDTH_20_NOHT)
return 0;
ap = sdata->vif.cfg.ap_addr;
rcu_read_lock();
list_for_each_entry_rcu(sta, &sdata->local->sta_list, list) {
if (!sta->sta.tdls || sta->sdata != sdata || !sta->uploaded ||
!test_sta_flag(sta, WLAN_STA_AUTHORIZED))
continue;
tdls_peer_found = true;
break;
}
rcu_read_unlock();
if (smps_mode == IEEE80211_SMPS_AUTOMATIC) {
if (tdls_peer_found || !sdata->u.mgd.powersave)
smps_mode = IEEE80211_SMPS_OFF;
else
smps_mode = IEEE80211_SMPS_DYNAMIC;
}
/* send SM PS frame to AP */
err = ieee80211_send_smps_action(sdata, smps_mode,
ap, ap,
ieee80211_vif_is_mld(&sdata->vif) ?
link->link_id : -1);
if (err)
link->u.mgd.req_smps = old_req;
else if (smps_mode != IEEE80211_SMPS_OFF && tdls_peer_found)
ieee80211_teardown_tdls_peers(link);
return err;
}
static int ieee80211_set_power_mgmt(struct wiphy *wiphy, struct net_device *dev,
bool enabled, int timeout)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
unsigned int link_id;
if (sdata->vif.type != NL80211_IFTYPE_STATION)
return -EOPNOTSUPP;
if (!ieee80211_hw_check(&local->hw, SUPPORTS_PS))
return -EOPNOTSUPP;
if (enabled == sdata->u.mgd.powersave &&
timeout == local->dynamic_ps_forced_timeout)
return 0;
sdata->u.mgd.powersave = enabled;
local->dynamic_ps_forced_timeout = timeout;
/* no change, but if automatic follow powersave */
for (link_id = 0; link_id < ARRAY_SIZE(sdata->link); link_id++) {
struct ieee80211_link_data *link;
link = sdata_dereference(sdata->link[link_id], sdata);
if (!link)
continue;
__ieee80211_request_smps_mgd(sdata, link,
link->u.mgd.req_smps);
}
if (ieee80211_hw_check(&local->hw, SUPPORTS_DYNAMIC_PS))
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
ieee80211_recalc_ps(local);
ieee80211_recalc_ps_vif(sdata);
ieee80211_check_fast_rx_iface(sdata);
return 0;
}
static void ieee80211_set_cqm_rssi_link(struct ieee80211_sub_if_data *sdata,
struct ieee80211_link_data *link,
s32 rssi_thold, u32 rssi_hyst,
s32 rssi_low, s32 rssi_high)
{
struct ieee80211_bss_conf *conf;
if (!link || !link->conf)
return;
conf = link->conf;
if (rssi_thold && rssi_hyst &&
rssi_thold == conf->cqm_rssi_thold &&
rssi_hyst == conf->cqm_rssi_hyst)
return;
conf->cqm_rssi_thold = rssi_thold;
conf->cqm_rssi_hyst = rssi_hyst;
conf->cqm_rssi_low = rssi_low;
conf->cqm_rssi_high = rssi_high;
link->u.mgd.last_cqm_event_signal = 0;
if (!ieee80211_vif_link_active(&sdata->vif, link->link_id))
return;
if (sdata->u.mgd.associated &&
(sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI))
ieee80211_link_info_change_notify(sdata, link, BSS_CHANGED_CQM);
}
static int ieee80211_set_cqm_rssi_config(struct wiphy *wiphy,
struct net_device *dev,
s32 rssi_thold, u32 rssi_hyst)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_vif *vif = &sdata->vif;
int link_id;
if (vif->driver_flags & IEEE80211_VIF_BEACON_FILTER &&
!(vif->driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI))
return -EOPNOTSUPP;
/* For MLD, handle CQM change on all the active links */
for (link_id = 0; link_id < IEEE80211_MLD_MAX_NUM_LINKS; link_id++) {
struct ieee80211_link_data *link =
sdata_dereference(sdata->link[link_id], sdata);
ieee80211_set_cqm_rssi_link(sdata, link, rssi_thold, rssi_hyst,
0, 0);
}
return 0;
}
static int ieee80211_set_cqm_rssi_range_config(struct wiphy *wiphy,
struct net_device *dev,
s32 rssi_low, s32 rssi_high)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_vif *vif = &sdata->vif;
int link_id;
if (vif->driver_flags & IEEE80211_VIF_BEACON_FILTER)
return -EOPNOTSUPP;
/* For MLD, handle CQM change on all the active links */
for (link_id = 0; link_id < IEEE80211_MLD_MAX_NUM_LINKS; link_id++) {
struct ieee80211_link_data *link =
sdata_dereference(sdata->link[link_id], sdata);
ieee80211_set_cqm_rssi_link(sdata, link, 0, 0,
rssi_low, rssi_high);
}
return 0;
}
static int ieee80211_set_bitrate_mask(struct wiphy *wiphy,
struct net_device *dev,
unsigned int link_id,
const u8 *addr,
const struct cfg80211_bitrate_mask *mask)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
int i, ret;
mac80211: check sdata_running on ieee80211_set_bitrate_mask Otherwise, we might call the driver callback before the interface was uploaded. Solves the following warning: WARNING: at net/mac80211/driver-ops.h:12 ieee80211_set_bitrate_mask+0xbc/0x18c [mac80211]() wlan0: Failed check-sdata-in-driver check, flags: 0x0 Modules linked in: wlcore_sdio wl12xx wl18xx wlcore mac80211 cfg80211 [last unloaded: cfg80211] [<c001b964>] (unwind_backtrace+0x0/0x12c) from [<c0495550>] (dump_stack+0x20/0x24) [<c0495550>] (dump_stack+0x20/0x24) from [<c003ee28>] (warn_slowpath_common+0x5c/0x74) [<c003ee28>] (warn_slowpath_common+0x5c/0x74) from [<c003eefc>] (warn_slowpath_fmt+0x40/0x48) [<c003eefc>] (warn_slowpath_fmt+0x40/0x48) from [<bf5c1ad0>] (ieee80211_set_bitrate_mask+0xbc/0x18c [mac80211]) [<bf5c1ad0>] (ieee80211_set_bitrate_mask+0xbc/0x18c [mac80211]) from [<bf575960>] (nl80211_set_tx_bitrate_mask+0x350/0x358 [cfg80211]) [<bf575960>] (nl80211_set_tx_bitrate_mask+0x350/0x358 [cfg80211]) from [<c03e9e94>] (genl_rcv_msg+0x1a8/0x1e8) [<c03e9e94>] (genl_rcv_msg+0x1a8/0x1e8) from [<c03e9164>] (netlink_rcv_skb+0x5c/0xc0) [<c03e9164>] (netlink_rcv_skb+0x5c/0xc0) from [<c03e9ce0>] (genl_rcv+0x28/0x34) [<c03e9ce0>] (genl_rcv+0x28/0x34) from [<c03e8e74>] (netlink_unicast+0x158/0x234) [<c03e8e74>] (netlink_unicast+0x158/0x234) from [<c03e93e0>] (netlink_sendmsg+0x218/0x298) [<c03e93e0>] (netlink_sendmsg+0x218/0x298) from [<c03b4e5c>] (sock_sendmsg+0xa4/0xc0) [<c03b4e5c>] (sock_sendmsg+0xa4/0xc0) from [<c03b5af4>] (__sys_sendmsg+0x1d8/0x254) [<c03b5af4>] (__sys_sendmsg+0x1d8/0x254) from [<c03b5ca8>] (sys_sendmsg+0x4c/0x70) [<c03b5ca8>] (sys_sendmsg+0x4c/0x70) from [<c0013980>] (ret_fast_syscall+0x0/0x3c) Note that calling the driver can also result in undefined behaviour since it doesn't have to deal with calls while down. Signed-off-by: Eliad Peller <eliad@wizery.com> [removed timestamps, added note - Johannes] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-12 09:41:15 +00:00
if (!ieee80211_sdata_running(sdata))
return -ENETDOWN;
/*
* If active validate the setting and reject it if it doesn't leave
* at least one basic rate usable, since we really have to be able
* to send something, and if we're an AP we have to be able to do
* so at a basic rate so that all clients can receive it.
*/
if (rcu_access_pointer(sdata->vif.bss_conf.chanctx_conf) &&
sdata->vif.bss_conf.chanreq.oper.chan) {
u32 basic_rates = sdata->vif.bss_conf.basic_rates;
enum nl80211_band band;
band = sdata->vif.bss_conf.chanreq.oper.chan->band;
if (!(mask->control[band].legacy & basic_rates))
return -EINVAL;
}
if (ieee80211_hw_check(&local->hw, HAS_RATE_CONTROL)) {
ret = drv_set_bitrate_mask(local, sdata, mask);
if (ret)
return ret;
}
for (i = 0; i < NUM_NL80211_BANDS; i++) {
struct ieee80211_supported_band *sband = wiphy->bands[i];
int j;
sdata->rc_rateidx_mask[i] = mask->control[i].legacy;
memcpy(sdata->rc_rateidx_mcs_mask[i], mask->control[i].ht_mcs,
sizeof(mask->control[i].ht_mcs));
memcpy(sdata->rc_rateidx_vht_mcs_mask[i],
mask->control[i].vht_mcs,
sizeof(mask->control[i].vht_mcs));
sdata->rc_has_mcs_mask[i] = false;
sdata->rc_has_vht_mcs_mask[i] = false;
if (!sband)
continue;
for (j = 0; j < IEEE80211_HT_MCS_MASK_LEN; j++) {
if (sdata->rc_rateidx_mcs_mask[i][j] != 0xff) {
sdata->rc_has_mcs_mask[i] = true;
break;
}
}
for (j = 0; j < NL80211_VHT_NSS_MAX; j++) {
if (sdata->rc_rateidx_vht_mcs_mask[i][j] != 0xffff) {
sdata->rc_has_vht_mcs_mask[i] = true;
break;
}
}
}
return 0;
}
static int ieee80211_start_radar_detection(struct wiphy *wiphy,
struct net_device *dev,
struct cfg80211_chan_def *chandef,
u32 cac_time_ms)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_chan_req chanreq = { .oper = *chandef };
struct ieee80211_local *local = sdata->local;
int err;
lockdep_assert_wiphy(local->hw.wiphy);
if (!list_empty(&local->roc_list) || local->scanning) {
err = -EBUSY;
goto out_unlock;
}
/* whatever, but channel contexts should not complain about that one */
sdata->deflink.smps_mode = IEEE80211_SMPS_OFF;
sdata->deflink.needed_rx_chains = local->rx_chains;
err = ieee80211_link_use_channel(&sdata->deflink, &chanreq,
IEEE80211_CHANCTX_SHARED);
if (err)
goto out_unlock;
wiphy_delayed_work_queue(wiphy, &sdata->deflink.dfs_cac_timer_work,
msecs_to_jiffies(cac_time_ms));
out_unlock:
return err;
}
static void ieee80211_end_cac(struct wiphy *wiphy,
struct net_device *dev)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = sdata->local;
lockdep_assert_wiphy(local->hw.wiphy);
list_for_each_entry(sdata, &local->interfaces, list) {
/* it might be waiting for the local->mtx, but then
* by the time it gets it, sdata->wdev.cac_started
* will no longer be true
*/
wiphy_delayed_work_cancel(wiphy,
&sdata->deflink.dfs_cac_timer_work);
if (sdata->wdev.cac_started) {
ieee80211_link_release_channel(&sdata->deflink);
sdata->wdev.cac_started = false;
}
}
}
static struct cfg80211_beacon_data *
cfg80211_beacon_dup(struct cfg80211_beacon_data *beacon)
{
struct cfg80211_beacon_data *new_beacon;
u8 *pos;
int len;
len = beacon->head_len + beacon->tail_len + beacon->beacon_ies_len +
beacon->proberesp_ies_len + beacon->assocresp_ies_len +
beacon->probe_resp_len + beacon->lci_len + beacon->civicloc_len;
if (beacon->mbssid_ies)
len += ieee80211_get_mbssid_beacon_len(beacon->mbssid_ies,
beacon->rnr_ies,
beacon->mbssid_ies->cnt);
new_beacon = kzalloc(sizeof(*new_beacon) + len, GFP_KERNEL);
if (!new_beacon)
return NULL;
if (beacon->mbssid_ies && beacon->mbssid_ies->cnt) {
new_beacon->mbssid_ies =
kzalloc(struct_size(new_beacon->mbssid_ies,
elem, beacon->mbssid_ies->cnt),
GFP_KERNEL);
if (!new_beacon->mbssid_ies) {
kfree(new_beacon);
return NULL;
}
if (beacon->rnr_ies && beacon->rnr_ies->cnt) {
new_beacon->rnr_ies =
kzalloc(struct_size(new_beacon->rnr_ies,
elem, beacon->rnr_ies->cnt),
GFP_KERNEL);
if (!new_beacon->rnr_ies) {
kfree(new_beacon->mbssid_ies);
kfree(new_beacon);
return NULL;
}
}
}
pos = (u8 *)(new_beacon + 1);
if (beacon->head_len) {
new_beacon->head_len = beacon->head_len;
new_beacon->head = pos;
memcpy(pos, beacon->head, beacon->head_len);
pos += beacon->head_len;
}
if (beacon->tail_len) {
new_beacon->tail_len = beacon->tail_len;
new_beacon->tail = pos;
memcpy(pos, beacon->tail, beacon->tail_len);
pos += beacon->tail_len;
}
if (beacon->beacon_ies_len) {
new_beacon->beacon_ies_len = beacon->beacon_ies_len;
new_beacon->beacon_ies = pos;
memcpy(pos, beacon->beacon_ies, beacon->beacon_ies_len);
pos += beacon->beacon_ies_len;
}
if (beacon->proberesp_ies_len) {
new_beacon->proberesp_ies_len = beacon->proberesp_ies_len;
new_beacon->proberesp_ies = pos;
memcpy(pos, beacon->proberesp_ies, beacon->proberesp_ies_len);
pos += beacon->proberesp_ies_len;
}
if (beacon->assocresp_ies_len) {
new_beacon->assocresp_ies_len = beacon->assocresp_ies_len;
new_beacon->assocresp_ies = pos;
memcpy(pos, beacon->assocresp_ies, beacon->assocresp_ies_len);
pos += beacon->assocresp_ies_len;
}
if (beacon->probe_resp_len) {
new_beacon->probe_resp_len = beacon->probe_resp_len;
new_beacon->probe_resp = pos;
memcpy(pos, beacon->probe_resp, beacon->probe_resp_len);
pos += beacon->probe_resp_len;
}
if (beacon->mbssid_ies && beacon->mbssid_ies->cnt) {
pos += ieee80211_copy_mbssid_beacon(pos,
new_beacon->mbssid_ies,
beacon->mbssid_ies);
if (beacon->rnr_ies && beacon->rnr_ies->cnt)
pos += ieee80211_copy_rnr_beacon(pos,
new_beacon->rnr_ies,
beacon->rnr_ies);
}
/* might copy -1, meaning no changes requested */
new_beacon->ftm_responder = beacon->ftm_responder;
if (beacon->lci) {
new_beacon->lci_len = beacon->lci_len;
new_beacon->lci = pos;
memcpy(pos, beacon->lci, beacon->lci_len);
pos += beacon->lci_len;
}
if (beacon->civicloc) {
new_beacon->civicloc_len = beacon->civicloc_len;
new_beacon->civicloc = pos;
memcpy(pos, beacon->civicloc, beacon->civicloc_len);
pos += beacon->civicloc_len;
}
return new_beacon;
}
void ieee80211_csa_finish(struct ieee80211_vif *vif, unsigned int link_id)
{
struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
struct ieee80211_local *local = sdata->local;
struct ieee80211_link_data *link_data;
if (WARN_ON(link_id >= IEEE80211_MLD_MAX_NUM_LINKS))
return;
rcu_read_lock();
link_data = rcu_dereference(sdata->link[link_id]);
if (WARN_ON(!link_data)) {
rcu_read_unlock();
return;
}
/* TODO: MBSSID with MLO changes */
if (vif->mbssid_tx_vif == vif) {
/* Trigger ieee80211_csa_finish() on the non-transmitting
* interfaces when channel switch is received on
* transmitting interface
*/
struct ieee80211_sub_if_data *iter;
list_for_each_entry_rcu(iter, &local->interfaces, list) {
if (!ieee80211_sdata_running(iter))
continue;
if (iter == sdata || iter->vif.mbssid_tx_vif != vif)
continue;
wiphy_work_queue(iter->local->hw.wiphy,
&iter->deflink.csa_finalize_work);
}
}
wiphy_work_queue(local->hw.wiphy, &link_data->csa_finalize_work);
rcu_read_unlock();
}
EXPORT_SYMBOL(ieee80211_csa_finish);
void ieee80211_channel_switch_disconnect(struct ieee80211_vif *vif, bool block_tx)
{
struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
struct ieee80211_local *local = sdata->local;
sdata->csa_blocked_tx = block_tx;
sdata_info(sdata, "channel switch failed, disconnecting\n");
wiphy_work_queue(local->hw.wiphy, &ifmgd->csa_connection_drop_work);
}
EXPORT_SYMBOL(ieee80211_channel_switch_disconnect);
static int ieee80211_set_after_csa_beacon(struct ieee80211_link_data *link_data,
u64 *changed)
{
struct ieee80211_sub_if_data *sdata = link_data->sdata;
int err;
switch (sdata->vif.type) {
case NL80211_IFTYPE_AP:
if (!link_data->u.ap.next_beacon)
return -EINVAL;
err = ieee80211_assign_beacon(sdata, link_data,
link_data->u.ap.next_beacon,
NULL, NULL, changed);
ieee80211_free_next_beacon(link_data);
if (err < 0)
return err;
break;
case NL80211_IFTYPE_ADHOC:
err = ieee80211_ibss_finish_csa(sdata, changed);
if (err < 0)
return err;
break;
#ifdef CONFIG_MAC80211_MESH
case NL80211_IFTYPE_MESH_POINT:
err = ieee80211_mesh_finish_csa(sdata, changed);
if (err < 0)
return err;
break;
#endif
default:
WARN_ON(1);
return -EINVAL;
}
return 0;
}
static int __ieee80211_csa_finalize(struct ieee80211_link_data *link_data)
{
struct ieee80211_sub_if_data *sdata = link_data->sdata;
struct ieee80211_local *local = sdata->local;
struct ieee80211_bss_conf *link_conf = link_data->conf;
u64 changed = 0;
int err;
lockdep_assert_wiphy(local->hw.wiphy);
/*
* using reservation isn't immediate as it may be deferred until later
* with multi-vif. once reservation is complete it will re-schedule the
* work with no reserved_chanctx so verify chandef to check if it
* completed successfully
*/
if (link_data->reserved_chanctx) {
/*
* with multi-vif csa driver may call ieee80211_csa_finish()
* many times while waiting for other interfaces to use their
* reservations
*/
if (link_data->reserved_ready)
return 0;
return ieee80211_link_use_reserved_context(link_data);
}
if (!cfg80211_chandef_identical(&link_conf->chanreq.oper,
&link_data->csa_chanreq.oper))
return -EINVAL;
link_conf->csa_active = false;
err = ieee80211_set_after_csa_beacon(link_data, &changed);
if (err)
return err;
ieee80211_link_info_change_notify(sdata, link_data, changed);
if (sdata->csa_blocked_tx) {
ieee80211_wake_vif_queues(local, sdata,
IEEE80211_QUEUE_STOP_REASON_CSA);
sdata->csa_blocked_tx = false;
}
err = drv_post_channel_switch(link_data);
if (err)
return err;
cfg80211_ch_switch_notify(sdata->dev, &link_data->csa_chanreq.oper,
link_data->link_id);
return 0;
}
static void ieee80211_csa_finalize(struct ieee80211_link_data *link_data)
{
struct ieee80211_sub_if_data *sdata = link_data->sdata;
if (__ieee80211_csa_finalize(link_data)) {
sdata_info(sdata, "failed to finalize CSA on link %d, disconnecting\n",
link_data->link_id);
cfg80211_stop_iface(sdata->local->hw.wiphy, &sdata->wdev,
GFP_KERNEL);
}
}
void ieee80211_csa_finalize_work(struct wiphy *wiphy, struct wiphy_work *work)
{
struct ieee80211_link_data *link =
container_of(work, struct ieee80211_link_data, csa_finalize_work);
struct ieee80211_sub_if_data *sdata = link->sdata;
struct ieee80211_local *local = sdata->local;
lockdep_assert_wiphy(local->hw.wiphy);
/* AP might have been stopped while waiting for the lock. */
if (!link->conf->csa_active)
return;
if (!ieee80211_sdata_running(sdata))
return;
ieee80211_csa_finalize(link);
}
static int ieee80211_set_csa_beacon(struct ieee80211_link_data *link_data,
struct cfg80211_csa_settings *params,
u64 *changed)
{
struct ieee80211_sub_if_data *sdata = link_data->sdata;
struct ieee80211_csa_settings csa = {};
int err;
switch (sdata->vif.type) {
case NL80211_IFTYPE_AP:
link_data->u.ap.next_beacon =
cfg80211_beacon_dup(&params->beacon_after);
if (!link_data->u.ap.next_beacon)
return -ENOMEM;
/*
* With a count of 0, we don't have to wait for any
* TBTT before switching, so complete the CSA
* immediately. In theory, with a count == 1 we
* should delay the switch until just before the next
* TBTT, but that would complicate things so we switch
* immediately too. If we would delay the switch
* until the next TBTT, we would have to set the probe
* response here.
*
* TODO: A channel switch with count <= 1 without
* sending a CSA action frame is kind of useless,
* because the clients won't know we're changing
* channels. The action frame must be implemented
* either here or in the userspace.
*/
if (params->count <= 1)
break;
if ((params->n_counter_offsets_beacon >
IEEE80211_MAX_CNTDWN_COUNTERS_NUM) ||
(params->n_counter_offsets_presp >
IEEE80211_MAX_CNTDWN_COUNTERS_NUM)) {
ieee80211_free_next_beacon(link_data);
return -EINVAL;
}
csa.counter_offsets_beacon = params->counter_offsets_beacon;
csa.counter_offsets_presp = params->counter_offsets_presp;
csa.n_counter_offsets_beacon = params->n_counter_offsets_beacon;
csa.n_counter_offsets_presp = params->n_counter_offsets_presp;
csa.count = params->count;
err = ieee80211_assign_beacon(sdata, link_data,
&params->beacon_csa, &csa,
NULL, changed);
if (err < 0) {
ieee80211_free_next_beacon(link_data);
return err;
}
break;
case NL80211_IFTYPE_ADHOC:
if (!sdata->vif.cfg.ibss_joined)
return -EINVAL;
if (params->chandef.width != sdata->u.ibss.chandef.width)
return -EINVAL;
switch (params->chandef.width) {
case NL80211_CHAN_WIDTH_40:
if (cfg80211_get_chandef_type(&params->chandef) !=
cfg80211_get_chandef_type(&sdata->u.ibss.chandef))
return -EINVAL;
break;
case NL80211_CHAN_WIDTH_5:
case NL80211_CHAN_WIDTH_10:
case NL80211_CHAN_WIDTH_20_NOHT:
case NL80211_CHAN_WIDTH_20:
break;
default:
return -EINVAL;
}
/* changes into another band are not supported */
if (sdata->u.ibss.chandef.chan->band !=
params->chandef.chan->band)
return -EINVAL;
/* see comments in the NL80211_IFTYPE_AP block */
if (params->count > 1) {
err = ieee80211_ibss_csa_beacon(sdata, params, changed);
if (err < 0)
return err;
}
ieee80211_send_action_csa(sdata, params);
break;
#ifdef CONFIG_MAC80211_MESH
case NL80211_IFTYPE_MESH_POINT: {
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
/* changes into another band are not supported */
if (sdata->vif.bss_conf.chanreq.oper.chan->band !=
params->chandef.chan->band)
return -EINVAL;
if (ifmsh->csa_role == IEEE80211_MESH_CSA_ROLE_NONE) {
ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_INIT;
if (!ifmsh->pre_value)
ifmsh->pre_value = 1;
else
ifmsh->pre_value++;
}
/* see comments in the NL80211_IFTYPE_AP block */
if (params->count > 1) {
err = ieee80211_mesh_csa_beacon(sdata, params, changed);
if (err < 0) {
ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_NONE;
return err;
}
}
if (ifmsh->csa_role == IEEE80211_MESH_CSA_ROLE_INIT)
ieee80211_send_action_csa(sdata, params);
break;
}
#endif
default:
return -EOPNOTSUPP;
}
return 0;
}
static void ieee80211_color_change_abort(struct ieee80211_sub_if_data *sdata)
{
sdata->vif.bss_conf.color_change_active = false;
ieee80211_free_next_beacon(&sdata->deflink);
cfg80211_color_change_aborted_notify(sdata->dev);
}
static int
__ieee80211_channel_switch(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_csa_settings *params)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_chan_req chanreq = { .oper = params->chandef };
struct ieee80211_local *local = sdata->local;
struct ieee80211_channel_switch ch_switch = {
.link_id = params->link_id,
};
struct ieee80211_chanctx_conf *conf;
struct ieee80211_chanctx *chanctx;
struct ieee80211_bss_conf *link_conf;
struct ieee80211_link_data *link_data;
u64 changed = 0;
u8 link_id = params->link_id;
int err;
lockdep_assert_wiphy(local->hw.wiphy);
if (!list_empty(&local->roc_list) || local->scanning)
return -EBUSY;
if (sdata->wdev.cac_started)
return -EBUSY;
if (WARN_ON(link_id >= IEEE80211_MLD_MAX_NUM_LINKS))
return -EINVAL;
link_data = wiphy_dereference(wiphy, sdata->link[link_id]);
if (!link_data)
return -ENOLINK;
link_conf = link_data->conf;
if (chanreq.oper.punctured && !link_conf->eht_support)
return -EINVAL;
/* don't allow another channel switch if one is already active. */
if (link_conf->csa_active)
return -EBUSY;
conf = wiphy_dereference(wiphy, link_conf->chanctx_conf);
if (!conf) {
err = -EBUSY;
goto out;
}
if (params->chandef.chan->freq_offset) {
/* this may work, but is untested */
err = -EOPNOTSUPP;
goto out;
}
chanctx = container_of(conf, struct ieee80211_chanctx, conf);
ch_switch.timestamp = 0;
ch_switch.device_timestamp = 0;
ch_switch.block_tx = params->block_tx;
ch_switch.chandef = chanreq.oper;
ch_switch.count = params->count;
err = drv_pre_channel_switch(sdata, &ch_switch);
if (err)
goto out;
err = ieee80211_link_reserve_chanctx(link_data, &chanreq,
chanctx->mode,
params->radar_required);
if (err)
goto out;
/* if reservation is invalid then this will fail */
err = ieee80211_check_combinations(sdata, NULL, chanctx->mode, 0);
if (err) {
ieee80211_link_unreserve_chanctx(link_data);
goto out;
}
/* if there is a color change in progress, abort it */
if (link_conf->color_change_active)
ieee80211_color_change_abort(sdata);
err = ieee80211_set_csa_beacon(link_data, params, &changed);
if (err) {
ieee80211_link_unreserve_chanctx(link_data);
goto out;
}
link_data->csa_chanreq = chanreq;
link_conf->csa_active = true;
if (params->block_tx &&
!ieee80211_hw_check(&local->hw, HANDLES_QUIET_CSA)) {
ieee80211_stop_vif_queues(local, sdata,
IEEE80211_QUEUE_STOP_REASON_CSA);
sdata->csa_blocked_tx = true;
}
cfg80211_ch_switch_started_notify(sdata->dev,
&link_data->csa_chanreq.oper, 0,
params->count, params->block_tx);
if (changed) {
ieee80211_link_info_change_notify(sdata, link_data, changed);
drv_channel_switch_beacon(sdata, &link_data->csa_chanreq.oper);
} else {
/* if the beacon didn't change, we can finalize immediately */
ieee80211_csa_finalize(link_data);
}
out:
return err;
}
int ieee80211_channel_switch(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_csa_settings *params)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = sdata->local;
lockdep_assert_wiphy(local->hw.wiphy);
return __ieee80211_channel_switch(wiphy, dev, params);
}
u64 ieee80211_mgmt_tx_cookie(struct ieee80211_local *local)
{
lockdep_assert_wiphy(local->hw.wiphy);
local->roc_cookie_counter++;
/* wow, you wrapped 64 bits ... more likely a bug */
if (WARN_ON(local->roc_cookie_counter == 0))
local->roc_cookie_counter++;
return local->roc_cookie_counter;
}
int ieee80211_attach_ack_skb(struct ieee80211_local *local, struct sk_buff *skb,
u64 *cookie, gfp_t gfp)
{
unsigned long spin_flags;
struct sk_buff *ack_skb;
int id;
ack_skb = skb_copy(skb, gfp);
if (!ack_skb)
return -ENOMEM;
spin_lock_irqsave(&local->ack_status_lock, spin_flags);
id = idr_alloc(&local->ack_status_frames, ack_skb,
1, 0x2000, GFP_ATOMIC);
spin_unlock_irqrestore(&local->ack_status_lock, spin_flags);
if (id < 0) {
kfree_skb(ack_skb);
return -ENOMEM;
}
IEEE80211_SKB_CB(skb)->status_data_idr = 1;
IEEE80211_SKB_CB(skb)->status_data = id;
*cookie = ieee80211_mgmt_tx_cookie(local);
IEEE80211_SKB_CB(ack_skb)->ack.cookie = *cookie;
return 0;
}
static void
ieee80211_update_mgmt_frame_registrations(struct wiphy *wiphy,
struct wireless_dev *wdev,
struct mgmt_frame_regs *upd)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev);
u32 preq_mask = BIT(IEEE80211_STYPE_PROBE_REQ >> 4);
u32 action_mask = BIT(IEEE80211_STYPE_ACTION >> 4);
bool global_change, intf_change;
global_change =
(local->probe_req_reg != !!(upd->global_stypes & preq_mask)) ||
(local->rx_mcast_action_reg !=
!!(upd->global_mcast_stypes & action_mask));
local->probe_req_reg = upd->global_stypes & preq_mask;
local->rx_mcast_action_reg = upd->global_mcast_stypes & action_mask;
intf_change = (sdata->vif.probe_req_reg !=
!!(upd->interface_stypes & preq_mask)) ||
(sdata->vif.rx_mcast_action_reg !=
!!(upd->interface_mcast_stypes & action_mask));
sdata->vif.probe_req_reg = upd->interface_stypes & preq_mask;
sdata->vif.rx_mcast_action_reg =
upd->interface_mcast_stypes & action_mask;
if (!local->open_count)
return;
if (intf_change && ieee80211_sdata_running(sdata))
drv_config_iface_filter(local, sdata,
sdata->vif.probe_req_reg ?
FIF_PROBE_REQ : 0,
FIF_PROBE_REQ);
if (global_change)
ieee80211_configure_filter(local);
}
static int ieee80211_set_antenna(struct wiphy *wiphy, u32 tx_ant, u32 rx_ant)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
int ret;
if (local->started)
return -EOPNOTSUPP;
ret = drv_set_antenna(local, tx_ant, rx_ant);
if (ret)
return ret;
local->rx_chains = hweight8(rx_ant);
return 0;
}
static int ieee80211_get_antenna(struct wiphy *wiphy, u32 *tx_ant, u32 *rx_ant)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
return drv_get_antenna(local, tx_ant, rx_ant);
}
static int ieee80211_set_rekey_data(struct wiphy *wiphy,
struct net_device *dev,
struct cfg80211_gtk_rekey_data *data)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (!local->ops->set_rekey_data)
return -EOPNOTSUPP;
drv_set_rekey_data(local, sdata, data);
return 0;
}
static int ieee80211_probe_client(struct wiphy *wiphy, struct net_device *dev,
const u8 *peer, u64 *cookie)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = sdata->local;
struct ieee80211_qos_hdr *nullfunc;
struct sk_buff *skb;
int size = sizeof(*nullfunc);
__le16 fc;
bool qos;
struct ieee80211_tx_info *info;
struct sta_info *sta;
struct ieee80211_chanctx_conf *chanctx_conf;
enum nl80211_band band;
int ret;
/* the lock is needed to assign the cookie later */
lockdep_assert_wiphy(local->hw.wiphy);
rcu_read_lock();
sta = sta_info_get_bss(sdata, peer);
if (!sta) {
ret = -ENOLINK;
goto unlock;
}
qos = sta->sta.wme;
chanctx_conf = rcu_dereference(sdata->vif.bss_conf.chanctx_conf);
if (WARN_ON(!chanctx_conf)) {
ret = -EINVAL;
goto unlock;
}
band = chanctx_conf->def.chan->band;
if (qos) {
fc = cpu_to_le16(IEEE80211_FTYPE_DATA |
IEEE80211_STYPE_QOS_NULLFUNC |
IEEE80211_FCTL_FROMDS);
} else {
size -= 2;
fc = cpu_to_le16(IEEE80211_FTYPE_DATA |
IEEE80211_STYPE_NULLFUNC |
IEEE80211_FCTL_FROMDS);
}
skb = dev_alloc_skb(local->hw.extra_tx_headroom + size);
if (!skb) {
ret = -ENOMEM;
goto unlock;
}
skb->dev = dev;
skb_reserve(skb, local->hw.extra_tx_headroom);
nullfunc = skb_put(skb, size);
nullfunc->frame_control = fc;
nullfunc->duration_id = 0;
memcpy(nullfunc->addr1, sta->sta.addr, ETH_ALEN);
memcpy(nullfunc->addr2, sdata->vif.addr, ETH_ALEN);
memcpy(nullfunc->addr3, sdata->vif.addr, ETH_ALEN);
nullfunc->seq_ctrl = 0;
info = IEEE80211_SKB_CB(skb);
info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS |
IEEE80211_TX_INTFL_NL80211_FRAME_TX;
info->band = band;
skb_set_queue_mapping(skb, IEEE80211_AC_VO);
skb->priority = 7;
if (qos)
nullfunc->qos_ctrl = cpu_to_le16(7);
ret = ieee80211_attach_ack_skb(local, skb, cookie, GFP_ATOMIC);
if (ret) {
kfree_skb(skb);
goto unlock;
}
local_bh_disable();
ieee80211_xmit(sdata, sta, skb);
local_bh_enable();
ret = 0;
unlock:
rcu_read_unlock();
return ret;
}
static int ieee80211_cfg_get_channel(struct wiphy *wiphy,
struct wireless_dev *wdev,
unsigned int link_id,
struct cfg80211_chan_def *chandef)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev);
struct ieee80211_local *local = wiphy_priv(wiphy);
struct ieee80211_chanctx_conf *chanctx_conf;
struct ieee80211_link_data *link;
int ret = -ENODATA;
rcu_read_lock();
link = rcu_dereference(sdata->link[link_id]);
if (!link) {
ret = -ENOLINK;
goto out;
}
chanctx_conf = rcu_dereference(link->conf->chanctx_conf);
if (chanctx_conf) {
*chandef = link->conf->chanreq.oper;
ret = 0;
} else if (local->open_count > 0 &&
local->open_count == local->monitors &&
sdata->vif.type == NL80211_IFTYPE_MONITOR) {
*chandef = local->monitor_chanreq.oper;
ret = 0;
}
out:
rcu_read_unlock();
return ret;
}
#ifdef CONFIG_PM
static void ieee80211_set_wakeup(struct wiphy *wiphy, bool enabled)
{
drv_set_wakeup(wiphy_priv(wiphy), enabled);
}
#endif
static int ieee80211_set_qos_map(struct wiphy *wiphy,
struct net_device *dev,
struct cfg80211_qos_map *qos_map)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct mac80211_qos_map *new_qos_map, *old_qos_map;
if (qos_map) {
new_qos_map = kzalloc(sizeof(*new_qos_map), GFP_KERNEL);
if (!new_qos_map)
return -ENOMEM;
memcpy(&new_qos_map->qos_map, qos_map, sizeof(*qos_map));
} else {
/* A NULL qos_map was passed to disable QoS mapping */
new_qos_map = NULL;
}
old_qos_map = sdata_dereference(sdata->qos_map, sdata);
rcu_assign_pointer(sdata->qos_map, new_qos_map);
if (old_qos_map)
kfree_rcu(old_qos_map, rcu_head);
return 0;
}
static int ieee80211_set_ap_chanwidth(struct wiphy *wiphy,
struct net_device *dev,
unsigned int link_id,
struct cfg80211_chan_def *chandef)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_link_data *link;
struct ieee80211_chan_req chanreq = { .oper = *chandef };
int ret;
u64 changed = 0;
link = sdata_dereference(sdata->link[link_id], sdata);
ret = ieee80211_link_change_chanreq(link, &chanreq, &changed);
if (ret == 0)
ieee80211_link_info_change_notify(sdata, link, changed);
return ret;
}
static int ieee80211_add_tx_ts(struct wiphy *wiphy, struct net_device *dev,
u8 tsid, const u8 *peer, u8 up,
u16 admitted_time)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
int ac = ieee802_1d_to_ac[up];
if (sdata->vif.type != NL80211_IFTYPE_STATION)
return -EOPNOTSUPP;
if (!(sdata->wmm_acm & BIT(up)))
return -EINVAL;
if (ifmgd->tx_tspec[ac].admitted_time)
return -EBUSY;
if (admitted_time) {
ifmgd->tx_tspec[ac].admitted_time = 32 * admitted_time;
ifmgd->tx_tspec[ac].tsid = tsid;
ifmgd->tx_tspec[ac].up = up;
}
return 0;
}
static int ieee80211_del_tx_ts(struct wiphy *wiphy, struct net_device *dev,
u8 tsid, const u8 *peer)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
struct ieee80211_local *local = wiphy_priv(wiphy);
int ac;
for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
struct ieee80211_sta_tx_tspec *tx_tspec = &ifmgd->tx_tspec[ac];
/* skip unused entries */
if (!tx_tspec->admitted_time)
continue;
if (tx_tspec->tsid != tsid)
continue;
/* due to this new packets will be reassigned to non-ACM ACs */
tx_tspec->up = -1;
/* Make sure that all packets have been sent to avoid to
* restore the QoS params on packets that are still on the
* queues.
*/
synchronize_net();
ieee80211_flush_queues(local, sdata, false);
/* restore the normal QoS parameters
* (unconditionally to avoid races)
*/
tx_tspec->action = TX_TSPEC_ACTION_STOP_DOWNGRADE;
tx_tspec->downgraded = false;
ieee80211_sta_handle_tspec_ac_params(sdata);
/* finally clear all the data */
memset(tx_tspec, 0, sizeof(*tx_tspec));
return 0;
}
return -ENOENT;
}
void ieee80211_nan_func_terminated(struct ieee80211_vif *vif,
u8 inst_id,
enum nl80211_nan_func_term_reason reason,
gfp_t gfp)
{
struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
struct cfg80211_nan_func *func;
u64 cookie;
if (WARN_ON(vif->type != NL80211_IFTYPE_NAN))
return;
spin_lock_bh(&sdata->u.nan.func_lock);
func = idr_find(&sdata->u.nan.function_inst_ids, inst_id);
if (WARN_ON(!func)) {
spin_unlock_bh(&sdata->u.nan.func_lock);
return;
}
cookie = func->cookie;
idr_remove(&sdata->u.nan.function_inst_ids, inst_id);
spin_unlock_bh(&sdata->u.nan.func_lock);
cfg80211_free_nan_func(func);
cfg80211_nan_func_terminated(ieee80211_vif_to_wdev(vif), inst_id,
reason, cookie, gfp);
}
EXPORT_SYMBOL(ieee80211_nan_func_terminated);
void ieee80211_nan_func_match(struct ieee80211_vif *vif,
struct cfg80211_nan_match_params *match,
gfp_t gfp)
{
struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
struct cfg80211_nan_func *func;
if (WARN_ON(vif->type != NL80211_IFTYPE_NAN))
return;
spin_lock_bh(&sdata->u.nan.func_lock);
func = idr_find(&sdata->u.nan.function_inst_ids, match->inst_id);
if (WARN_ON(!func)) {
spin_unlock_bh(&sdata->u.nan.func_lock);
return;
}
match->cookie = func->cookie;
spin_unlock_bh(&sdata->u.nan.func_lock);
cfg80211_nan_match(ieee80211_vif_to_wdev(vif), match, gfp);
}
EXPORT_SYMBOL(ieee80211_nan_func_match);
static int ieee80211_set_multicast_to_unicast(struct wiphy *wiphy,
struct net_device *dev,
const bool enabled)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
sdata->u.ap.multicast_to_unicast = enabled;
return 0;
}
void ieee80211_fill_txq_stats(struct cfg80211_txq_stats *txqstats,
struct txq_info *txqi)
{
if (!(txqstats->filled & BIT(NL80211_TXQ_STATS_BACKLOG_BYTES))) {
txqstats->filled |= BIT(NL80211_TXQ_STATS_BACKLOG_BYTES);
txqstats->backlog_bytes = txqi->tin.backlog_bytes;
}
if (!(txqstats->filled & BIT(NL80211_TXQ_STATS_BACKLOG_PACKETS))) {
txqstats->filled |= BIT(NL80211_TXQ_STATS_BACKLOG_PACKETS);
txqstats->backlog_packets = txqi->tin.backlog_packets;
}
if (!(txqstats->filled & BIT(NL80211_TXQ_STATS_FLOWS))) {
txqstats->filled |= BIT(NL80211_TXQ_STATS_FLOWS);
txqstats->flows = txqi->tin.flows;
}
if (!(txqstats->filled & BIT(NL80211_TXQ_STATS_DROPS))) {
txqstats->filled |= BIT(NL80211_TXQ_STATS_DROPS);
txqstats->drops = txqi->cstats.drop_count;
}
if (!(txqstats->filled & BIT(NL80211_TXQ_STATS_ECN_MARKS))) {
txqstats->filled |= BIT(NL80211_TXQ_STATS_ECN_MARKS);
txqstats->ecn_marks = txqi->cstats.ecn_mark;
}
if (!(txqstats->filled & BIT(NL80211_TXQ_STATS_OVERLIMIT))) {
txqstats->filled |= BIT(NL80211_TXQ_STATS_OVERLIMIT);
txqstats->overlimit = txqi->tin.overlimit;
}
if (!(txqstats->filled & BIT(NL80211_TXQ_STATS_COLLISIONS))) {
txqstats->filled |= BIT(NL80211_TXQ_STATS_COLLISIONS);
txqstats->collisions = txqi->tin.collisions;
}
if (!(txqstats->filled & BIT(NL80211_TXQ_STATS_TX_BYTES))) {
txqstats->filled |= BIT(NL80211_TXQ_STATS_TX_BYTES);
txqstats->tx_bytes = txqi->tin.tx_bytes;
}
if (!(txqstats->filled & BIT(NL80211_TXQ_STATS_TX_PACKETS))) {
txqstats->filled |= BIT(NL80211_TXQ_STATS_TX_PACKETS);
txqstats->tx_packets = txqi->tin.tx_packets;
}
}
static int ieee80211_get_txq_stats(struct wiphy *wiphy,
struct wireless_dev *wdev,
struct cfg80211_txq_stats *txqstats)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
struct ieee80211_sub_if_data *sdata;
int ret = 0;
spin_lock_bh(&local->fq.lock);
rcu_read_lock();
if (wdev) {
sdata = IEEE80211_WDEV_TO_SUB_IF(wdev);
if (!sdata->vif.txq) {
ret = 1;
goto out;
}
ieee80211_fill_txq_stats(txqstats, to_txq_info(sdata->vif.txq));
} else {
/* phy stats */
txqstats->filled |= BIT(NL80211_TXQ_STATS_BACKLOG_PACKETS) |
BIT(NL80211_TXQ_STATS_BACKLOG_BYTES) |
BIT(NL80211_TXQ_STATS_OVERLIMIT) |
BIT(NL80211_TXQ_STATS_OVERMEMORY) |
BIT(NL80211_TXQ_STATS_COLLISIONS) |
BIT(NL80211_TXQ_STATS_MAX_FLOWS);
txqstats->backlog_packets = local->fq.backlog;
txqstats->backlog_bytes = local->fq.memory_usage;
txqstats->overlimit = local->fq.overlimit;
txqstats->overmemory = local->fq.overmemory;
txqstats->collisions = local->fq.collisions;
txqstats->max_flows = local->fq.flows_cnt;
}
out:
rcu_read_unlock();
spin_unlock_bh(&local->fq.lock);
return ret;
}
static int
ieee80211_get_ftm_responder_stats(struct wiphy *wiphy,
struct net_device *dev,
struct cfg80211_ftm_responder_stats *ftm_stats)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
return drv_get_ftm_responder_stats(local, sdata, ftm_stats);
}
static int
ieee80211_start_pmsr(struct wiphy *wiphy, struct wireless_dev *dev,
struct cfg80211_pmsr_request *request)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(dev);
return drv_start_pmsr(local, sdata, request);
}
static void
ieee80211_abort_pmsr(struct wiphy *wiphy, struct wireless_dev *dev,
struct cfg80211_pmsr_request *request)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(dev);
return drv_abort_pmsr(local, sdata, request);
}
static int ieee80211_set_tid_config(struct wiphy *wiphy,
struct net_device *dev,
struct cfg80211_tid_config *tid_conf)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct sta_info *sta;
lockdep_assert_wiphy(sdata->local->hw.wiphy);
if (!sdata->local->ops->set_tid_config)
return -EOPNOTSUPP;
if (!tid_conf->peer)
return drv_set_tid_config(sdata->local, sdata, NULL, tid_conf);
sta = sta_info_get_bss(sdata, tid_conf->peer);
if (!sta)
return -ENOENT;
return drv_set_tid_config(sdata->local, sdata, &sta->sta, tid_conf);
}
static int ieee80211_reset_tid_config(struct wiphy *wiphy,
struct net_device *dev,
const u8 *peer, u8 tids)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct sta_info *sta;
lockdep_assert_wiphy(sdata->local->hw.wiphy);
if (!sdata->local->ops->reset_tid_config)
return -EOPNOTSUPP;
if (!peer)
return drv_reset_tid_config(sdata->local, sdata, NULL, tids);
sta = sta_info_get_bss(sdata, peer);
if (!sta)
return -ENOENT;
return drv_reset_tid_config(sdata->local, sdata, &sta->sta, tids);
}
static int ieee80211_set_sar_specs(struct wiphy *wiphy,
struct cfg80211_sar_specs *sar)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
if (!local->ops->set_sar_specs)
return -EOPNOTSUPP;
return local->ops->set_sar_specs(&local->hw, sar);
}
static int
ieee80211_set_after_color_change_beacon(struct ieee80211_sub_if_data *sdata,
u64 *changed)
{
switch (sdata->vif.type) {
case NL80211_IFTYPE_AP: {
int ret;
if (!sdata->deflink.u.ap.next_beacon)
return -EINVAL;
ret = ieee80211_assign_beacon(sdata, &sdata->deflink,
sdata->deflink.u.ap.next_beacon,
NULL, NULL, changed);
ieee80211_free_next_beacon(&sdata->deflink);
if (ret < 0)
return ret;
break;
}
default:
WARN_ON_ONCE(1);
return -EINVAL;
}
return 0;
}
static int
ieee80211_set_color_change_beacon(struct ieee80211_sub_if_data *sdata,
struct cfg80211_color_change_settings *params,
u64 *changed)
{
struct ieee80211_color_change_settings color_change = {};
int err;
switch (sdata->vif.type) {
case NL80211_IFTYPE_AP:
sdata->deflink.u.ap.next_beacon =
cfg80211_beacon_dup(&params->beacon_next);
if (!sdata->deflink.u.ap.next_beacon)
return -ENOMEM;
if (params->count <= 1)
break;
color_change.counter_offset_beacon =
params->counter_offset_beacon;
color_change.counter_offset_presp =
params->counter_offset_presp;
color_change.count = params->count;
err = ieee80211_assign_beacon(sdata, &sdata->deflink,
&params->beacon_color_change,
NULL, &color_change, changed);
if (err < 0) {
ieee80211_free_next_beacon(&sdata->deflink);
return err;
}
break;
default:
return -EOPNOTSUPP;
}
return 0;
}
static void
ieee80211_color_change_bss_config_notify(struct ieee80211_sub_if_data *sdata,
u8 color, int enable, u64 changed)
{
lockdep_assert_wiphy(sdata->local->hw.wiphy);
sdata->vif.bss_conf.he_bss_color.color = color;
sdata->vif.bss_conf.he_bss_color.enabled = enable;
changed |= BSS_CHANGED_HE_BSS_COLOR;
ieee80211_link_info_change_notify(sdata, &sdata->deflink, changed);
if (!sdata->vif.bss_conf.nontransmitted && sdata->vif.mbssid_tx_vif) {
struct ieee80211_sub_if_data *child;
list_for_each_entry(child, &sdata->local->interfaces, list) {
if (child != sdata && child->vif.mbssid_tx_vif == &sdata->vif) {
child->vif.bss_conf.he_bss_color.color = color;
child->vif.bss_conf.he_bss_color.enabled = enable;
ieee80211_link_info_change_notify(child,
&child->deflink,
BSS_CHANGED_HE_BSS_COLOR);
}
}
}
}
static int ieee80211_color_change_finalize(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_local *local = sdata->local;
u64 changed = 0;
int err;
lockdep_assert_wiphy(local->hw.wiphy);
sdata->vif.bss_conf.color_change_active = false;
err = ieee80211_set_after_color_change_beacon(sdata, &changed);
if (err) {
cfg80211_color_change_aborted_notify(sdata->dev);
return err;
}
ieee80211_color_change_bss_config_notify(sdata,
sdata->vif.bss_conf.color_change_color,
1, changed);
cfg80211_color_change_notify(sdata->dev);
return 0;
}
void ieee80211_color_change_finalize_work(struct wiphy *wiphy,
struct wiphy_work *work)
{
struct ieee80211_sub_if_data *sdata =
container_of(work, struct ieee80211_sub_if_data,
deflink.color_change_finalize_work);
struct ieee80211_local *local = sdata->local;
lockdep_assert_wiphy(local->hw.wiphy);
/* AP might have been stopped while waiting for the lock. */
if (!sdata->vif.bss_conf.color_change_active)
return;
if (!ieee80211_sdata_running(sdata))
return;
ieee80211_color_change_finalize(sdata);
}
void ieee80211_color_collision_detection_work(struct work_struct *work)
{
struct delayed_work *delayed_work = to_delayed_work(work);
struct ieee80211_link_data *link =
container_of(delayed_work, struct ieee80211_link_data,
color_collision_detect_work);
struct ieee80211_sub_if_data *sdata = link->sdata;
cfg80211_obss_color_collision_notify(sdata->dev, link->color_bitmap);
}
void ieee80211_color_change_finish(struct ieee80211_vif *vif)
{
struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
wiphy_work_queue(sdata->local->hw.wiphy,
&sdata->deflink.color_change_finalize_work);
}
EXPORT_SYMBOL_GPL(ieee80211_color_change_finish);
void
ieee80211_obss_color_collision_notify(struct ieee80211_vif *vif,
u64 color_bitmap)
{
struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
struct ieee80211_link_data *link = &sdata->deflink;
if (sdata->vif.bss_conf.color_change_active || sdata->vif.bss_conf.csa_active)
return;
if (delayed_work_pending(&link->color_collision_detect_work))
return;
link->color_bitmap = color_bitmap;
/* queue the color collision detection event every 500 ms in order to
* avoid sending too much netlink messages to userspace.
*/
ieee80211_queue_delayed_work(&sdata->local->hw,
&link->color_collision_detect_work,
msecs_to_jiffies(500));
}
EXPORT_SYMBOL_GPL(ieee80211_obss_color_collision_notify);
static int
ieee80211_color_change(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_color_change_settings *params)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = sdata->local;
u64 changed = 0;
int err;
lockdep_assert_wiphy(local->hw.wiphy);
if (sdata->vif.bss_conf.nontransmitted)
return -EINVAL;
/* don't allow another color change if one is already active or if csa
* is active
*/
if (sdata->vif.bss_conf.color_change_active || sdata->vif.bss_conf.csa_active) {
err = -EBUSY;
goto out;
}
err = ieee80211_set_color_change_beacon(sdata, params, &changed);
if (err)
goto out;
sdata->vif.bss_conf.color_change_active = true;
sdata->vif.bss_conf.color_change_color = params->color;
cfg80211_color_change_started_notify(sdata->dev, params->count);
if (changed)
ieee80211_color_change_bss_config_notify(sdata, 0, 0, changed);
else
/* if the beacon didn't change, we can finalize immediately */
ieee80211_color_change_finalize(sdata);
out:
return err;
}
static int
ieee80211_set_radar_background(struct wiphy *wiphy,
struct cfg80211_chan_def *chandef)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
if (!local->ops->set_radar_background)
return -EOPNOTSUPP;
return local->ops->set_radar_background(&local->hw, chandef);
}
static int ieee80211_add_intf_link(struct wiphy *wiphy,
struct wireless_dev *wdev,
unsigned int link_id)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev);
lockdep_assert_wiphy(sdata->local->hw.wiphy);
if (wdev->use_4addr)
return -EOPNOTSUPP;
return ieee80211_vif_set_links(sdata, wdev->valid_links, 0);
}
static void ieee80211_del_intf_link(struct wiphy *wiphy,
struct wireless_dev *wdev,
unsigned int link_id)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev);
lockdep_assert_wiphy(sdata->local->hw.wiphy);
ieee80211_vif_set_links(sdata, wdev->valid_links, 0);
}
static int sta_add_link_station(struct ieee80211_local *local,
struct ieee80211_sub_if_data *sdata,
struct link_station_parameters *params)
{
struct sta_info *sta;
int ret;
sta = sta_info_get_bss(sdata, params->mld_mac);
if (!sta)
return -ENOENT;
if (!sta->sta.valid_links)
return -EINVAL;
if (sta->sta.valid_links & BIT(params->link_id))
return -EALREADY;
ret = ieee80211_sta_allocate_link(sta, params->link_id);
if (ret)
return ret;
ret = sta_link_apply_parameters(local, sta, true, params);
if (ret) {
ieee80211_sta_free_link(sta, params->link_id);
return ret;
}
/* ieee80211_sta_activate_link frees the link upon failure */
return ieee80211_sta_activate_link(sta, params->link_id);
}
static int
ieee80211_add_link_station(struct wiphy *wiphy, struct net_device *dev,
struct link_station_parameters *params)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = wiphy_priv(wiphy);
lockdep_assert_wiphy(sdata->local->hw.wiphy);
return sta_add_link_station(local, sdata, params);
}
static int sta_mod_link_station(struct ieee80211_local *local,
struct ieee80211_sub_if_data *sdata,
struct link_station_parameters *params)
{
struct sta_info *sta;
sta = sta_info_get_bss(sdata, params->mld_mac);
if (!sta)
return -ENOENT;
if (!(sta->sta.valid_links & BIT(params->link_id)))
return -EINVAL;
return sta_link_apply_parameters(local, sta, false, params);
}
static int
ieee80211_mod_link_station(struct wiphy *wiphy, struct net_device *dev,
struct link_station_parameters *params)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = wiphy_priv(wiphy);
lockdep_assert_wiphy(sdata->local->hw.wiphy);
return sta_mod_link_station(local, sdata, params);
}
static int sta_del_link_station(struct ieee80211_sub_if_data *sdata,
struct link_station_del_parameters *params)
{
struct sta_info *sta;
sta = sta_info_get_bss(sdata, params->mld_mac);
if (!sta)
return -ENOENT;
if (!(sta->sta.valid_links & BIT(params->link_id)))
return -EINVAL;
/* must not create a STA without links */
if (sta->sta.valid_links == BIT(params->link_id))
return -EINVAL;
ieee80211_sta_remove_link(sta, params->link_id);
return 0;
}
static int
ieee80211_del_link_station(struct wiphy *wiphy, struct net_device *dev,
struct link_station_del_parameters *params)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
lockdep_assert_wiphy(sdata->local->hw.wiphy);
return sta_del_link_station(sdata, params);
}
static int ieee80211_set_hw_timestamp(struct wiphy *wiphy,
struct net_device *dev,
struct cfg80211_set_hw_timestamp *hwts)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = sdata->local;
if (!local->ops->set_hw_timestamp)
return -EOPNOTSUPP;
if (!check_sdata_in_driver(sdata))
return -EIO;
return local->ops->set_hw_timestamp(&local->hw, &sdata->vif, hwts);
}
static int
ieee80211_set_ttlm(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_ttlm_params *params)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
lockdep_assert_wiphy(sdata->local->hw.wiphy);
return ieee80211_req_neg_ttlm(sdata, params);
}
const struct cfg80211_ops mac80211_config_ops = {
.add_virtual_intf = ieee80211_add_iface,
.del_virtual_intf = ieee80211_del_iface,
.change_virtual_intf = ieee80211_change_iface,
.start_p2p_device = ieee80211_start_p2p_device,
.stop_p2p_device = ieee80211_stop_p2p_device,
.add_key = ieee80211_add_key,
.del_key = ieee80211_del_key,
.get_key = ieee80211_get_key,
.set_default_key = ieee80211_config_default_key,
.set_default_mgmt_key = ieee80211_config_default_mgmt_key,
.set_default_beacon_key = ieee80211_config_default_beacon_key,
.start_ap = ieee80211_start_ap,
.change_beacon = ieee80211_change_beacon,
.stop_ap = ieee80211_stop_ap,
.add_station = ieee80211_add_station,
.del_station = ieee80211_del_station,
.change_station = ieee80211_change_station,
.get_station = ieee80211_get_station,
.dump_station = ieee80211_dump_station,
.dump_survey = ieee80211_dump_survey,
#ifdef CONFIG_MAC80211_MESH
.add_mpath = ieee80211_add_mpath,
.del_mpath = ieee80211_del_mpath,
.change_mpath = ieee80211_change_mpath,
.get_mpath = ieee80211_get_mpath,
.dump_mpath = ieee80211_dump_mpath,
.get_mpp = ieee80211_get_mpp,
.dump_mpp = ieee80211_dump_mpp,
.update_mesh_config = ieee80211_update_mesh_config,
.get_mesh_config = ieee80211_get_mesh_config,
.join_mesh = ieee80211_join_mesh,
.leave_mesh = ieee80211_leave_mesh,
#endif
.join_ocb = ieee80211_join_ocb,
.leave_ocb = ieee80211_leave_ocb,
.change_bss = ieee80211_change_bss,
.inform_bss = ieee80211_inform_bss,
.set_txq_params = ieee80211_set_txq_params,
.set_monitor_channel = ieee80211_set_monitor_channel,
.suspend = ieee80211_suspend,
.resume = ieee80211_resume,
.scan = ieee80211_scan,
.abort_scan = ieee80211_abort_scan,
.sched_scan_start = ieee80211_sched_scan_start,
.sched_scan_stop = ieee80211_sched_scan_stop,
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
.auth = ieee80211_auth,
.assoc = ieee80211_assoc,
.deauth = ieee80211_deauth,
.disassoc = ieee80211_disassoc,
.join_ibss = ieee80211_join_ibss,
.leave_ibss = ieee80211_leave_ibss,
.set_mcast_rate = ieee80211_set_mcast_rate,
.set_wiphy_params = ieee80211_set_wiphy_params,
.set_tx_power = ieee80211_set_tx_power,
.get_tx_power = ieee80211_get_tx_power,
.rfkill_poll = ieee80211_rfkill_poll,
CFG80211_TESTMODE_CMD(ieee80211_testmode_cmd)
CFG80211_TESTMODE_DUMP(ieee80211_testmode_dump)
.set_power_mgmt = ieee80211_set_power_mgmt,
.set_bitrate_mask = ieee80211_set_bitrate_mask,
.remain_on_channel = ieee80211_remain_on_channel,
.cancel_remain_on_channel = ieee80211_cancel_remain_on_channel,
.mgmt_tx = ieee80211_mgmt_tx,
.mgmt_tx_cancel_wait = ieee80211_mgmt_tx_cancel_wait,
.set_cqm_rssi_config = ieee80211_set_cqm_rssi_config,
.set_cqm_rssi_range_config = ieee80211_set_cqm_rssi_range_config,
.update_mgmt_frame_registrations =
ieee80211_update_mgmt_frame_registrations,
.set_antenna = ieee80211_set_antenna,
.get_antenna = ieee80211_get_antenna,
.set_rekey_data = ieee80211_set_rekey_data,
.tdls_oper = ieee80211_tdls_oper,
.tdls_mgmt = ieee80211_tdls_mgmt,
.tdls_channel_switch = ieee80211_tdls_channel_switch,
.tdls_cancel_channel_switch = ieee80211_tdls_cancel_channel_switch,
.probe_client = ieee80211_probe_client,
.set_noack_map = ieee80211_set_noack_map,
#ifdef CONFIG_PM
.set_wakeup = ieee80211_set_wakeup,
#endif
.get_channel = ieee80211_cfg_get_channel,
.start_radar_detection = ieee80211_start_radar_detection,
.end_cac = ieee80211_end_cac,
.channel_switch = ieee80211_channel_switch,
.set_qos_map = ieee80211_set_qos_map,
.set_ap_chanwidth = ieee80211_set_ap_chanwidth,
.add_tx_ts = ieee80211_add_tx_ts,
.del_tx_ts = ieee80211_del_tx_ts,
.start_nan = ieee80211_start_nan,
.stop_nan = ieee80211_stop_nan,
.nan_change_conf = ieee80211_nan_change_conf,
.add_nan_func = ieee80211_add_nan_func,
.del_nan_func = ieee80211_del_nan_func,
.set_multicast_to_unicast = ieee80211_set_multicast_to_unicast,
.tx_control_port = ieee80211_tx_control_port,
.get_txq_stats = ieee80211_get_txq_stats,
.get_ftm_responder_stats = ieee80211_get_ftm_responder_stats,
.start_pmsr = ieee80211_start_pmsr,
.abort_pmsr = ieee80211_abort_pmsr,
.probe_mesh_link = ieee80211_probe_mesh_link,
.set_tid_config = ieee80211_set_tid_config,
.reset_tid_config = ieee80211_reset_tid_config,
.set_sar_specs = ieee80211_set_sar_specs,
.color_change = ieee80211_color_change,
.set_radar_background = ieee80211_set_radar_background,
.add_intf_link = ieee80211_add_intf_link,
.del_intf_link = ieee80211_del_intf_link,
.add_link_station = ieee80211_add_link_station,
.mod_link_station = ieee80211_mod_link_station,
.del_link_station = ieee80211_del_link_station,
.set_hw_timestamp = ieee80211_set_hw_timestamp,
.set_ttlm = ieee80211_set_ttlm,
};